NEW & IMPROVED
INSTANT LOAD CONSTANT FORCE • • • • • •
Class ii & III Treatment Non-Compliance Quick Placement Easy to Maintain Up to 5mm of Correction 3 50 Grams of Constant Force
Phone: 866.346.5665 | Fax: 314.426.1967 | www.dynaflex.com
NEW & IMPROVED The all new CS3® is made from an exclusive nickel titanium material that has amazing features and far surpasses other spring systems including our popular CS-2000®. Although the CS-2000® is extremely successful, we wanted to make it even better and that’s exactly what we did. The new CS3® spring will load force instantly and remain extremely consistent throughout treatment. The benefit is a smoother, more constant force that performs better and lasts longer. The CS3® system is one of the most successful Class II and Class III chairside appliances used in the world due to its simplicity, effectiveness and value pricing as compared to other systems available today. Now the CS3® is a major improvement on an already successful and widely used product. This is a must have system for your orthodontic tool box.
NEW DESIGN CREATES INSTANT LOADING AND MORE CONSISTENT FORCE LEVELS
Case photos compliments of Dr. Andy Hayes of St. Louis, MO
700
AFTER
600 Load (g)
BEFORE
CS3® SPRING
500 400 300 200 100 0
10
15
20
25
30
35
Position (mm)
YOUR CLASS II & CLASS III SOLUTION This revolutionary system will guarantee results with your Class II and Class III orthodontic cases. The CS3® Niti springs are a DynaFlex® exclusive, utilizing a patented, instant force (350 grams), closed coil spring and a specially built “key-hole” end which fits over a patented slotted base pivot similar to a Herbst® housing nut.
Previously I disliked treating Class III bites and underbites, but with the CS3® Springs I feel much more comfortable treating them and achieve a higher success rate. Dr. Shawn O’Bannon | GO ORTHODONTICS
REFERENCE PUBLISHED ARTICLES USING THE CS SYSTEM To view, visit - www.dynaflex.com/CS-System * For detailed information on Class II Correction, reference: “A new, no-compliance Class II correction strategy using nickel-titanium coil-springs.”
* For detailed information on Class III Correction, reference: “Class III correction using an inter-arch spring loaded module”.
Easy 10 Minute Step-By-Step Instructions For Archwire Placement
Class II Class III STEP 1:
Place 2 pivots on the upper archwire, position pivots distal to the upper canines, insert and ligate archwire
STEP 1:
UPPER ARCH
LOWER ARCH
STEP 2:
STEP 2:
Outside the mouth, assemble a spring, screw and pivot combination. Place assembled components onto the lower archwire. Insert and ligate archwire positioning the pivots mesial to the lower first molars
Outside the mouth, assemble a spring, screw and pivot combination. Place assembled components onto the upper archwire. Insert and ligate archwire positioning the pivots mesial to the upper first molars
STEP 3:
STEP 3:
Using a hemostat, stretch spring eyelet onto the upper pivot and secure in place with a screw
Using a hemostat, stretch spring eyelet onto the lower pivot and secure in place with a screw
Tips For Class II Treatment
Class III Archwire Set-Up Example
No more than 2mm of initial mandibular advancement is recommended. At subsequent visits, reposition the pivots or change from 10mm springs to 7mm springs for further mandibular advancement.
Using the Hybrid Screw For use in the active position, simply insert the screw into pivot and tighten to lock into desired position on the archwire. See chart for archwire size needed for locking.
Pivot Size
Place 2 pivots on the lower archwire, position pivots distal to the lower canines, insert and ligate archwire
.018
.022
Min. Lock Size
.016 x .016
.016 x .022
Max. Lock Size
.018 x .025
.021 x .025
For use in a passive position, simply cut off the tip of the hybrid screw with a hard wire cutter, allowing the pivot to move freely along archwire. When used in a passive position, the pivot will be free to slide and rotate on archwire.
Example of Laboratory Options
Upper View
Lower View Laboratory Option
There are multiple options to use CS3® in Class II & III along with upper and lower fixed appliances.
See ALL NEW CS3 Educational Animations at www.dynaflex.com
Use your QR code reader to view or download a prescription or visit www.dynaflex.com.
Results Matter
The CS3® Appliance has been used successfully for over 8 years with thousands of patients seeing remarkable results with little to no compliance necessary. Case photos compliments of Dr. Michael Williams of Gulfport, MS
BEFORE
Class II Treated Case BEFORE
AFTER
PROGRESS
AFTER
Class III Treated Case
“The CS3 System is an incredible new development in non-compliance therapy. The new spring provides a smoother, more consistent force, allowing for better treatment results and increased patient comfort.” Dr. Michael Williams, DDS, MS The Gulf Coast Center for Advanced Cosmetic Orthodontics
“DynaFlex® CS3® is my appliance of choice for Class III correction. It’s easy to place and compatible with all bracket systems. It’s also easy on the patient. You get excellent, proven results in a short period of time. I am always amazed at how much Class III correction you can achieve in just a couple of visits.“ Dr. Katherine Friedman Litchfield County Orthodontics
CS3® 5-Patient Kit
Each 5 Patient Kit Includes:
Pivot
• 10 CS3 NiTi Springs • 20 Slotted Pivots • 20 Hybrid Screws • Allen Pencil
Wire inserted into pivot
Each 10 Patient Kit Includes: • 20 CS3 NiTi Springs • 40 Slotted Pivots • 40 Hybrid Screws • Allen Pencil
New MIM construction for strength & durability
10 mm
7 mm
Hybrid Screw
Niti Springs
New collar to reduce abrasion
.018 & .022 Slot Available
To Order: 866.346.5665 or www.dynaflex.com
5 PATIENT KIT .018 .022 PRICE: 5-Patient Kit (10mm) #39-1810-5 #39-2210-5 $354.95 ea. 5-Patient Kit (7mm) #39-1807-5 #39-2207-5 $354.95 ea.
10 PATIENT KIT .018 .022 PRICE: 10-Patient Kit (10mm) #39-1810-10 #39-2210-10 $654.95 ea. 10-Patient Kit (7mm) #39-1807-10 #39-2207-10 $654.95 ea.
5 Patient Kit Includes:
10 Patient Kit Includes:
10 CS3® Niti Springs, 20 Slotted Pivots, 20 Hybrid Screws & an Allen Pencil
20 CS3® Niti Springs, 40 Slotted Pivots, 40 Hybrid Screws & an Allen Pencil
CS3® COMPONENTS CS3® Niti Spring 10mm CS3® Niti Spring 7mm Hybrid Screw
#38093 #38113 #3815-5E
$18.00 ea. $18.00 ea. $ 2.25 ea.
Pivot with Slotted Base .022 x .025 Pivot with Slotted Base .018 x .025 - Allen Pencil (sterilizable)
#3810-E #3830-E #3823-E
$10.50 ea. $10.50 ea. $28.50 ea.
10403 International Plaza Dr. St. Ann, MO 63074 866-346-5665
Simple, Effective, Proven, And Now Better. Join the thousands of doctors worldwide that use the CS system and enjoy incredible results. CS3® Springs for Class III have profoundly expanded the envelope of Class III underbite patients that we can treat with stability and non-surgically. It is particularly successful on patients where regular Class III elastics are just not effective. Dr. Matthew S. Johnson, DDS, MSD
PROVEN RESULTS! BEFORE
PROGRESS
AFTER
Case photos compliments of Dr. Andy Hayes of St. Louis, MO
020217 © 2017 DynaFlex®, St. Louis, MO 63074. Printed in U.S.A. All rights reserved. It is a violation of copyright law to reproduce all or part of this material, including photography, without the permission of DynaFlex®. CS3® patent pending. Pivot Patent 6,036,488. Hybrid Screw Patent US D749, 737S.