Drag Specialties Magazine - February 2019

2 0 1 9

LO U I S V I L L E

N V P

P R O D U C T

E X P O

P R E V I E W

F E B RUA RY 2 0 1 9

★

VOL. 26, #1

HOT-ROD

FAT BOB

$3.95

THE 2019 FATBOOK COVER BIKE ★ Drag Specialties Up Country Run ★ J&B Cycleworks Profile ★ AIMExpo Coverage

THE ALL NEW

SATURN • INJECTION MOLDED POLYCARBONATE SHELL • FULLY REMOVABLE MOISTURE WICKING LINER • DROP DOWN SUN VISOR • D-RING CLOSURE SYSTEM • SECURE, SNUG, COMFORTABLE FIT • DOT APPROVED

Z1R.COM

FLYING RETINA | $84.95

JUSTICE | $84.95

FLAT BLACK

TITANIUM SOLIDS | $79.95

BLACK

TAN

CONTENTS February 2019 H Vol. 26 #1 Publisher/Editor-in-Chief: Don Emde • don@emdebooks.com

ON THE COVER

Editor: Dennis Johnson • dennisjohnsonwrites@verizon.net

24

Art Director: Morgan Williams

Ad Coordinator: Jen Rose • jenrose@me.com

2019 FatBook Cover Bike: Nick Trask

and the crew at Trask Performance build a hot-rod Fat Bob.

Copy Editor: Tracy Emde

Webmaster: Jeff Emde

Design Assistant: Kristina Nystul Breaux

Contributing Writers: Beth Dolgner, Guido Ebert, Don Emde, Dennis Johnson, Joe Kress Contributing Photographers: Don Emde, Sara Liberte, Melonhead Photo, Metzeler To our readers: Editorial space in this publication has been offered on an “advertorial” basis. While we have done our best to check the facts, our readers should be aware that the responsibility for accuracy rests with the manufacturers, vendors or sponsors who provided the information to us. – Publisher.

Drag Specialties Magazine is published by Don Emde, Inc., 92 Argonaut, Ste. 160, Aliso Viejo, CA. 92656. Copyright © 2019 by Don Emde, Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage or retrieval system without permission from the publisher. Unsolicited photos or manuscripts cannot be returned unless SASE is provided. Don Emde Inc. cannot take responsibility for lost or misdirected mail. Don Emde Inc. assumes no liability for any material published herein.

All statements and information are the responsibility of the authors and/or sponsors. Drag Specialties Magazine, Parts Magazine, Parts Europe Magazine and Parts Magazine Online are trademarks of Don Emde Inc.

DEPARTMENTS

»» 6 »» 10 »» 112

Welcome Letter News & Events Parts Department

SPECIAL FEATURES

»» 68 »» 80 »» 90

Metzeler Cruisetec Press Ride 2019 Louisville NVP Product Expo Preview Dealership Profile: J&B Cycleworks

PRODUCT SHOWCASE

Publishing office: 92 Argonaut, Suite 160, Aliso Viejo, CA 92656 Tel: 949-215-4780 • Fax: 949-215-9042 Don Emde Inc. Directors: President: Don Emde Vice President: Tracy Emde Secretary/General Manager: Jen Rose WE’RE ONLINE! Parts Magazine and Drag Specialties Magazine are available free online in an easily downloadable format. You can also check out the very latest news from the world of motorcycling in our online Newsroom.

See it all at: www.partsmagazineonline.com

Printed in the USA NOTICE: Drag Specialties does not sell direct to the public. To purchase products seen in this magazine, please see your dealer.

»» 28 LA Choppers »» 30 Custom Dynamics »» 32 Vance & Hines »» 46 Barnett »» 48 Bassani Xhaust »» 50 EBC »» 52 J.W. Speaker »» 54 Hogtunes/Wild Boar Audio »» 56 Michelin »» 58 S&S Cycle »» 60 Dakota Digital »» 62 THRASHIN Supply »» 64 Magnum Shielding »» 66 Mustang »» 70 Metzeler »» 74 Kuryakyn »» 76 J&M Corporation »» 78 Saddlemen »» 94 Coastal Moto »» 96 Progressive Suspension »» 98 Fat Baggers »» 102 Avon Grips »» 103 NAMZ »» 104 Drag Specialties Brakes »» 105 Dynojet »» 106 Feuling »» 107 BDL »» 108 LePera »» 109 OptiMate »» 110 DP Brakes »» 111 Ken’s Factory

E M D E

R E P O R T

Back In The Saddle Again

Pirelli/Metzeler photo

by D on Em de

O

ne of the best parts of my job is getting invited to motorcycle events and it recently happened to me twice in the same month. In early October, the Pirelli/Metzeler company had its new Metzeler Cruisetec tire coming out and they wanted members of the press to try them out themselves on the road. I gladly accepted their invitation to fly back to ride with some fellow journalists around the countryside and mountains of Arkansas. Check out my report of the trip that starts on page 68, followed by a technical story about the new tire. Thanks to my friends at Pirelli/Metzeler for their hospitality.

sales rep now about getting qualified for the 2019 ride. Great job as always by the Drag Specialties sales and event team!

Just a few weeks later, it was time to head to Greenville, South Carolina for the annual Drag Specialties Dealer Ride. Each year’s event is at a different location and this year we were in what the locals call “Upcountry,” the northwest corner of South Carolina and into parts of North Carolina. Drag’s dealer rides can’t be beat. There’s always such a great mix of adventure by riding new routes most of us haven’t been on, seeing people from the industry that we might not have seen since the previous year, and making new friends. Our story starts on page 36. For those of you who were on the ride, this feature will be a nice record of your experience. If you were not there, I hope you see what you missed out on and start talking to your Drag Specialties

Speaking of the FatBook, the cover bike of this issue is the very same motorcycle that adorns the cover of the 2019 Drag Specialties catalog, better known as the FatBook. Be sure to read the behind the scenes story starting on page 24 about this great looking custom put together by Nick Trask and the crew at Trask Performance.

Looking ahead, the Drag Specialties Magazine staff will soon be heading to the Spring 2019 NVP Product Expo, this year for the first time in Louisville, Kentucky. Most of Drag’s dealers will likely be there, but if you haven’t made your plans yet, it’s not too late. Hundreds of booths will feature the top V-twin accessories found in the Drag Specialties FatBook and the people who designed and manufactured these many great products will be there to talk to you.

We hope to see you in Louisville.

■

Ride Safe!

Publisher / Editor-in-Chief

6

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

2019 NVP PRODUCT EXPO FEBRUARY 16 & 17 KICC CONVENTION CENTER LOUISVILLE, KY

Increased Show Space with Over 300 Displays New Products Dealer Training

Easy to get around, most walkable downtown Fourth Street Live! Premier dining and entertainment destination

A day’s drive for over half the U.S. population Drivable, affordable and one of the friendliest cities

MEET US IN LOUISVILLE!

H IT W E ID R R U O Y E V IMPRO .

Y IT C A P A C E G A R O T S E R O M

T N A T S N I E H T TACTICAL LUGGAGE RAIN COVER *INCLUDED

3515-0198 R1300LXE TACTICAL $110.00

3515-0197 TR3300DE TACTICAL $175.00

3515-0199 TR2300DE TACTICAL $145.00

3516-0271 TS1450R TACTICAL $145.00

!

E D A R T UPG

.

7 8 9 1 E C IN S S N IO T U L TRUSTED SO

3516-0272 TS1620R TACTICAL $145.00

3516-0270 TS3200DE TACTICAL $170.00

3515-0202 BR3400 TACTICAL $220.00

3501-1364 BR4100 TACTICAL $189.00

3515-0200 S3500 TACTICAL $240.00

AND

NEWS EVENTS American Flat Track: 2019 Schedule Announced

A

merican Flat Track has finalized its 2019 schedule.

This is great news for Drag Specialties dealers who want to catch a race to see returning Drag Specialties/Parts Unlimited rider and five-time Grand National Champion Jared Mees compete for another title aboard his Indian Scout FTR750.

action in 2018 and has already become one of the most highly-anticipated events of the upcoming season.

“Now that we have finalized our 2019 schedule, we can hit the ground running,” said Cameron Gray, COO of AFT Events. “We’ve got new venues, freshly-built and redesigned racetracks and are planning some major improvements to

In his first year as a Drag Specialties-sponsored rider, Jared Mees (2nd from left) dominated the 2018 AFT Grand National Championship series.

Scott Hunter/American Flat Track

The 2019 running of the New York Short Track at Weedsport Speedway in Weedsport, NY has been moved back one week to July 13, 2019. Race fans can plan on an entire weekend of excitement, as AFT Events will once again throw a pre-race kickoff party with food, live music, entertainment and rider meet & greet session.

AFT’s season finale returns to the Meadowlands Racing & Entertainment at the famed MetLife Sports Complex in East Rutherford, NJ for a second running of the Meadowlands Mile. The race is set for September 28, 2019 - one week earlier than its 2018 date. This venue provided show stopping race

10

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

overall fan experience for the coming season. AFT fans can look forward to the most exciting season of American Flat Track to date.”

American Flat Track will kick off its 2019 season with its barbanging Daytona TT in appropriate fashion - during the wild Bike Week festivities in Daytona Beach. The 2019 Daytona TT happens Thursday, March 14 once again under the lights of the iconic Daytona International Speedway. ■

»» Tickets will be available soon at www.americanflattrack.com. continued on page 12...

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

AND

NEWS EVENTS ...continued from page 10

Sequential Modules are HERE!

Scott Hunter/American Flat Track

Get rear sequential turn signal flashing on ANY (3) red LED’s or use our Royal Flush 6-pack LED’s! Built-in Load EQ, Static or Dynamic flashing & available for Harley, Indian or Victory.

2019 AMERICAN FLAT TRACK SCHEDULE: 1. MARCH 14: DAYTONA TT — Daytona International Speedway, Daytona Beach, FL 2. MARCH 23: ATLANTA SHORT TRACK — Dixie Speedway, Woodstock, GA 3. APRIL 20: TEXAS HALF-MILE — Texas Motor Speedway, Fort Worth, TX 4. APRIL 27: WILD HORSE TT — Wild Horse Pass Motorsports Park, Chandler, AZ 5. MAY 11: PERRIS HALF-MILE — Perris Auto Speedway, Perris, CA 6. MAY 18: SACRAMENTO MILE — Cal Expo, Sacramento, CA 7. MAY 26: SPRINGFIELD MILE I — Illinois State Fairgrounds, Springfield, IL (AFT Singles Springfield TT same weekend) 8. JUNE 1: RED MILE — Red Mile, Lexington, KY 9. JUNE 15: LACONIA SHORT TRACK — New Hampshire Motor Speedway, Loudon, NH 10. JUNE 29: LIMA HALF-MILE — Allen County Fairgrounds, Lima, OH 11. JULY 13: NEW YORK SHORT TRACK — Weedsport Speedway, Weedsport, NY 12. AUGUST 4: BUFFALO CHIP TT — Buffalo Chip, Sturgis, SD 13. AUGUST 6: BLACK HILLS HALF-MILE — Black Hills Speedway, Rapid City, SD 14. AUGUST 17: PEORIA TT — Peoria Motorcycle Club, Peoria, IL 15. SEPTEMBER 1: SPRINGFIELD MILE II — Illinois State Fairgrounds, Springfield, IL (AFT Singles Springfield Short Track same weekend) 16. SEPTEMBER 7: WILLIAMS GROVE HALF-MILE — Williams Grove Speedway, Mechanicsburg, PA 17. SEPTEMBER 21: MINNESOTA MILE — Canterbury Park, Shakopee, MN

NAMZ Custom Cycle Products NAMZ / BADLANDS PRODUCTS & ACCESSORIES ARE AVAILABLE IN THE USA & EUROPE FROM PARTS UNLIMITED AND DRAG SPECIALTIES.

18. SEPTEMBER 28: MEADOWLANDS MILE — Meadowlands Racing & Entertainment, East Rutherford, NJ

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • •

AND

NEWS EVENTS Sturgis Motorcycle Museum & Hall of Fame LAUNCHES SCHOLARSHIP PROGRAM

T

he Sturgis Motorcycle Museum & Hall of Fame announced its Youth Build and Lonnie’s Heart Scholarship program. In 2019, senior high school students from the northern Black Hills will be invited to participate in a co-ed Youth Build Program sponsored by the Sturgis Motorcycle Museum & Hall of Fame.

This program will be under the leadership of Hall of Fame inductees, along with local recognized experts in the field of motorcycle parts manufacturing and custom bike builds.

The students will be required to have passing grades and must be present at school, much like the athletic programs, to be eligible for the Youth Build Program.

The program will begin midJanuary and will be held in Sturgis on select weeknights with possible Saturdays. The students will be rated on a variety of criteria like how much they contribute to the project and attitude. The highest ranked students will be granted scholarships. ■

Here are the concept drawings of the bikes the students will be building.

»»

Students can apply at www.sturgismuseum.com.

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

13

FROM A TRUSTED NAME

NEWS EVENTS AND

QUALITY CABLES

Corrections

In our December 2018 issue of Drag Specialties Magazine, we inadvertently left out Drag Specialties sales rep Benny Harwell’s name in our coverage of the NVP/Michelin Jam. Harwell has performed as one of the lead vocalists at the popular event during the Madison NVP Product Expo since it was launched by Michelin in 2014. We’re sorry for the omission. Todd Olson photo

OE Quality, High-Performance Black Vinyl or Stainless-Steel Braided cables — including extended lengths.

SEE YOUR

DRAG SPECIALTIES REP

dragspecialties.com

|

#SINCE1968

A caption on page 42 of the December 2018 issue of Drag Specialties Magazine incorrectly labeled two Drag Specialties/Parts Unlimited riders. It should have read, “AFT Twins Grand National Champion Jared Mees and AFT Rider Shayna Texter spent the day autographing posters for showgoers. Motorcycle Medic owner Jason Barry seized the opportunity to meet with the two Drag Specialties/Parts Unlimited riders. Todd Olson photo

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • •

AND

NEWS EVENTS Motorcycle Ownership Among Women Climbs to 19 Percent “Many people in the industry have worked some 30 years to achieve this, and now the data confirms it: More and more women are getting out there and enjoying motorcycles.”

The MIC polled 2,472 adults nationwide for the 2018 Motorcycle/ATV Owner Survey. For decades, the MIC surveys have served as the census of motorcycling, and have tracked a steady growth in the percentage of women who own bikes.

“Major efforts to increase the number of women riders go back to the late 1980s when top manufacturers and distributors came together and formed Discover Today’s Motorcycling, the industry outreach program built to introduce new riders to two-wheeling,” said the MIC’s Cam Arnold. “The first DTM project in the 1980s spotlighted the historic 1916 Van Buren sisters ride across the country and garnered much media attention. Throughout the 1990s and on till today, the big brands have dedicated increasing amounts of attention to the women’s market, and we’ve simply seen more and more positive imagery on TV, in movies and in many mainstream settings where women on motorcycles are just having fun.”

N

early one in five motorcycle owners is now female, compared with one in 10 less than a decade ago, and the data suggests that women could soon make up one quarter of owners. This would be a major shift in motorcycling demographics, according to the latest national survey by the Motorcycle Industry Council.

Among all age groups, women now make up 19 percent of motorcycle owners. But the 2018 survey showed even greater female ownership within younger generations. Among Gen X (currently between 39 to 53 years old) motorcycle owners, 22 percent were women; among Gen Y (currently between 24 to 38 years old,) 26 percent were women.

“As the number of Boomer and mature motorcyclists shrink and are replaced by newer riders, we could soon be looking at a solid 25 percent of motorcycle owners being female,” said Andria Yu, MIC director of communications. “We’ve seen with our own eyes many more women riders – on the roads, on the trails, on the track, with families, at motorcycling events, forming clubs and just being part of everyday group rides.

16

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

The 2018 owner survey also found that women motorcycle owners spend, on average, $574 a year on tires, routine repairs, maintenance, replacement parts, and accessories and modifying equipment, compared with $497 by men.

“We’ve seen particularly strong growth in the aftermarket sector for women,” said Cinnamon Kernes, newly appointed vice president and general manager of MIC Events and the American International Motorcycle Expo presented by Nationwide. “Over the past decade, more women are designing riding gear and other products specifically for female riders, working in major companies or creating their own brands.

Having gear designed for women by women was a huge step and has certainly helped encourage female ridership.”

Motorcycling has grown in popularity and acceptance in American culture in recent decades, which is reflected in the survey. It found that 66 percent of women motorcycle owners say their family and friends would have a positive attitude toward motorcycles and scooters. ■

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

michelin Scorcher Tires ®

®

The Michelin co-branded tire for Harley-Davidson® Motorcycles 2017 marked the 10 year anniversary of MICHELIN® Scorcher® tires, all of which reflect the collective engineering and design efforts of Michelin and Harley-Davidson. Today, MICHELIN Scorcher tires are offered in 29 sizes across four versions. They are the OE tire for 11 out of 32 Harley-Davidson® models, including the all-new Harley-Davidson FXDR™ motorcycle pictured above. All MICHELIN Scorcher tires are available through authorized Harley-Davidson® dealers and Drag Specialties.

Motorcycle.Michelinman.com

MichelinOnMyMoto

Copyright © 2018 Michelin North America, Inc. All rights reserved. © 2018 H-D or its affiliates. HARLEY-DAVIDSON, HARLEY, H-D, and the Bar and Shield Logo are among the trademarks of H-D U.S.A., LLC.

E V E N T

R E P O R T

There was a large crowd of dealers and industry members ready when the doors opened on Thursday, October 11th. AIMExpo photo

AIMEXPO DRAG SPECIALTIES ADDS AIMEXPO TO ANNUAL SHOW SCHEDULE Story by Don Emde / Photos by AIMExpo LAS VEGAS, NV • OCT 11-14 and Don Emde as noted

D

espite having two shows of its own each year, Drag Specialties made a first-time appearance at the AIMExpo, held October 11-14 in Las Vegas. AIMExpo caught the attention of Drag Specialties with the news of a Powersports Industry Week concept, involving a dealer-consumer show at the Mandalay Bay convention center, Las Vegas BikeFest, the MotoAmerica Night of Champions banquet, and the Monster Energy Cup Supercross at nearby Sam Boyd Stadium.

The parent company, LeMans Corporation, decided to provide the all-important distributor presence to support the efforts of more than 50 of its vendors that were signed up to exhibit at this year’s show. Participation also meant bringing in house brands such as Arctiva, Icon, Moose Racing, Moose Utility Division, Parts Unlimited, Thor, and Z1R for exposure in both the dealer and consumer hours.

Produced by the Motorcycle Industry Council, AIMExpo is the only show of its kind in the United States. AIME – which stands for American International Motorcycle Expo continued on pg. 20...

18

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E V E N T

R E P O R T

AIMEXPO LAS VEGAS, NV • OCT 11-14 ...continued from pg. 18

20

Mike Manning (middle) explains Dunlop’s latest sportbike tires to some attending dealers. Don Emde photo

Indian featured not only its full line of street bikes, but also the specially prepared machine ridden by Travis Pastrana at his recent televised jumps at Caesar’s Palace. Don Emde photo

Ladies from many aspects of the industry gathered in the Media Hub on opening day for a reception dedicated to Women in Powersports. Don Emde photo

The extensive line of accessories from Nelson-Rigg on display at the show.

Don Emde photo

Sena had a huge presence with its ever-growing line, which now includes helmets with built-in radios and communications. AIMExpo photo

Harley-Davidson was just one of the brands that consumers could choose from for a test ride at the AIMExpo Outdoors area. AIMExpo photo ...continued on pg. 22

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

E V E N T

R E P O R T

AIMEXPO LAS VEGAS, NV • OCT 11-14

EBC had a strong presence in the show with this huge logo tower. AIMExpo photo

Kuryakyn’s full display of touring accessories was shown. Don Emde photo

Avon Tyres was there in force to introduce its new Cobra Chrome line. From left The Millennium Technologies booth featured many products are: Ashley Vowles, Sukoshi Fahey, Doug Ross and Don Argento. Don Emde photo distributed by Drag Specialties. AIMExpo photo

...continued from pg. 20

22

– is modeled after the time-tested manufacturer-dealerconsumer events held in Milan, Italy, Cologne, Germany and other locations in Europe.

A reception was held for Women in Powersports, as well as the MIC Gas Tank Competition (recognizing innovation and new ideas).

In addition to a huge display of motorcycles, ATVs, UTVs, snowmobiles and more, there were nearly 500 exhibitors from the aftermarket. Other unique features included the Media Hub (a dedicated press center), Dealer Summit (two days of business seminars), MotoCulture (an area dedicated to lifestyle subcultures in motorcycling), and AIMExpo Outdoors (test rides from eight manufacturers).

By the numbers, the MIC reported attendance of more than 2,500 dealers, representation from all 50 states and more than 50 different countries, 500 exhibitors, 250 media members and 100 media outlets. ■

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

»» AIMExpo moves to the Midwest for 2019. From September 26-29,

the show will be held at the Greater Columbus Convention Center in Columbus, OH. For more info, log on at www.AIMExpoUSA.com

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

FATBOOK COVER BIKE

CO V E R

S TO R Y

Sleek, simple and clean – it’s the time-honored prescription for a hot-rod Harley and it sure works on the 2019 FatBook cover bike.

Ness Oval Micro mirrors and a Custom Dynamics Probeam LED headlight found their way up front on this one.

H

ave a look at the 2019 FatBook cover bike, a new-generation Softail that’s been made over by Nick Trask of Trask Performance – it’s going to get plenty of attention.

Not that the new model FXFBS Fat Bob is likely to go unnoticed wherever it goes. With big-inch Milwaukee-Eight power, a newly designed frame that’s both lighter and stiffer, triple-disc braking and an all-around tough guy attitude, Harley-Davidson is calling this one its purest, best performing hot rod ever.

Hard to disagree with that, but as everyone knows, no matter how good any factory Harley is when it rolls off the production line, it can only get better with some time, some planning and the FatBook. Trask and his crew in Phoenix put these words into action when it got to work on the bike gracing the cover of the newest edition of Drag Specialties’ parts catalog.

First, a word about the new color, arguably the first thing that’s going to catch everyone’s eye. “The last thing we wanted was another black Harley-Davidson blending into the background,” Trask explains.

There’s little chance of that happening here. This 2018 FXFBS is a stunner, its bright and vibrant PPG yellow making darn sure of that. However, before any of that paint went on, Trask and the guys had a real go at this Fat Bob front to back, and they found everything needed to turn this Harley into something special right inside the FatBook.

24

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

DIALING IN A HOT-ROD FAT BOB

Working with bolt-ons, the FatBook, and paint the Trask Performance Team took a box-stock Softail and turned it into a cover bike standout.

2018 H-D FXFBS FAT BOB

THE 2019

Ken’s Factory cam cover with the matching Vanquish Series rocker box covers dress out that multi-valve motor. Those are THRASHIN Supply’s P-54 pegs.

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

25

S TO R Y

FATBOOK COVER BIKE

CO V E R

Lots of changes here starting with the Ness Procross rims and rotors. The seat is a Drag Specialties Double Diamond with custom stitching, the air cleaner is one of Trask’s see-through *Assault Charge setups.

While Trask Performance customs are all knockouts, wild one-off builds going all the way back to the first Assault Series builds, this assignment would be limited to readily available bolt-on parts, as well as the Trask team’s discerning eye and attention to detail. With the exception of a custommade side cover from Trask, that’s exactly what happened.

In short order the Fat Bob took on a whole new personality.

A factory-stock Fat Bob still comes with a somewhat cluttered look. “Just cleaning that up made a huge difference,” Trask says.

One of the first areas addressed was the factory exhaust.

The stock Harley system with its bronze-tinted pipes and twin oversize mufflers is huge – it visually dominates the whole right side of the motorcycle.

Trask Performance’s *Assault 2-into-1 stainless-steel replacement pipe took care of that in short, upswept order.

And this being a Trask project, performance needed an upgrade so the engine got even more oomph with a full

*S&S Cycle 550C cam kit, *Sidewinder valve springs and a free-breathing *Trask Assault Charge air cleaner.

Off to a great start, another big change came with a pair of 18 x 5½ Ness Procross wheels, the matching Procross Jaggedstyle front and rear rotors and a set of Pirelli Night Dragon tires, chunky 180/55-18s at both ends. The theme was set.

The Build Sheet lists where things went from there but the highlights, literally, begin with the finish chosen for all the small bits that accompany that bright-yellow paint. It’s Cerakote, a gun-maker’s standard and it’s been used here in all the places you’d expect to see a more traditional powder coating.

It’s up front on the fork brace, it’s on the air cleaner, on that handlebar and its riser mounts, on the dash panel, the rear fender struts, the foot pegs, controls and more.

Everywhere you see that industrial-look gray finish it’s Cerakote, playing perfectly against the bright, brash PPG yellow. Simple, and cool.

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 26

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

The same can be said about all the new lighting, front and rear. Up front it’s a plain, bottom-mount Drag Specialties headlight bucket fit with a Custom Dynamics True Black Probeam LED, a neat combo that replaces the stock, futuristic headlight assembly. All the turn signals are Joker Machine’s Rat series, amber for the front, red on the tail.

There’s also a new Drag Specialties Double Diamond seat with custom green stitching. Given the attention to performance from Trask’s team, there was an equal emphasis on handling, with Legend Suspension on board. Up front it’s the AXEO system in the forks, on the rear it’s a full AIR-A replacement.

There’s plenty more, like slim foot pegs from THRASHIN Supply, Barnett’ clear derby cover, stainless steel fastener kits from Feuling, and Ken’s Factory’s super detailed rocker box and cam covers. ■

»» Check out the Build Sheet for all the details and be sure

to make time to see it up-close-and personal. This Traskbuilt Fat Bob has already joined the Drag Specialties Show Truck fleet of customs. It’ll be an easy one to spot.

2018 H-D FXFBS FAT BOB

CUSTOMIZED BY TRASK PERFORMANCE / PHOENIX, AZ PART # CHASSIS 0414-0546 1311-0156 0802-1073 0306-0598 0210-0332 0213-0814 0213-0820 0506-1260 1620-1763 1620-1764 2401-1044 DRIVELINE 1132-1220 1107-0437 2401-1043 BRAKES 1710-3314 1710-3323 2401-0153 2401-0181 0610-0846 0610-1766 1742-0065 1742-0106 1742-0064 1740-0001 1742-0066 R41431 CONTROLS 0601-2788 0602-0872 0630-1598 1603-0333 0640-0499 0640-0500 1601-0224 FUEL/OIL 1010-2150 0703-0460 1020-2411 ELECTRICAL/LIGHTING 2001-0554 2001-1749 DS-285005 2050-0238 2050-0046 2020-1445 2020-1424 2040-1274 2030-0343 2030-0532 2030-0645 MOTOR 1800-2275 0940-1691 0940-1720 0934-5937 0934-5920 0928-0096 0926-2972 0925-1173 0929-0075 2401-0951 MISC. 2404-0174 PAINT – PPG Vibrant Yellow Eric Carr, Specialty Coatings

DESCRIPTION

Sug. Retail

Legends Suspension Axeo Front Suspension System $799.95 Legends Suspension Air-A Rear Suspension

1,649.95 Drag Specialties Seat Double Diamond w/Custom Green Stitching 354.95 Pirelli 180/55-18 Night Dragon Tires. (Front & Rear) 657.90 Arlen Ness 18 x 5.5 Procross Rims (2)

2,199.90 Arlen Ness Front Hub Kit

299.95 Arlen Ness Rear Hub Kit

299.95 Speed Merchant Brushed Skid Plate

234.95 THRASHIN Supply P-54 Front Slim Foot Pegs 199.95 THRASHIN Supply P-54 Rear Slim Foot Pegs

199.95 Feuling 12 Point Stainless Chassis Fastener Kit 199.95 Trask Performance Billet Clutch Basket

Barnett Clear Derby Cover

Feuling 12 Point Stainless Drive Line Fastener Kit

449.95 195.95 239.95

Arlen Ness 11.8˝ Procross Front Brake Rotors (2) Arlen Ness 11.5˝ Jagged Rear Brake Rotor

Diamond Engineering 12 Point Front Brake Rotor Bolt Kits (2) Diamond Engineering 12 Point Rear Brake Rotor Bolt Kit Joker Machine Front Master Cylinder Cover Smooth Joker Machine Hydraulic Clutch Master Cylinder Cover Smooth Drag Specialties AN # 3 Adapter For Brake Line Drag Specialties 3/8˝ 90 Degree Banjo Fitting Drag Specialties 7/16-24˝ Straight Brake Line Adapter Drag Specialties Nylon Brake Line, 25 FT

Drag Specialties 3/16˝-3/16˝ Junction Union Brake Line Russell 10mm x 1.0 #3 Male Endura Fitting

599.90 199.95 49.90 27.95 49.95 59.95 16.95 11.95 16.95 30.95 16.95 12.95

Trask Performance Black V-Line Moto Handlebars Trask Performance 2˝ x 1.25˝ Assault Risers

Trask Performance V-Line Grips

THRASHIN Supply TSC Shift Peg

Arlen Ness Oval Micro Left Mirror

Arlen Ness Oval Micro Right Mirror Joker Machine Stalker Shift Linkage Rod

299.95 269.95 159.95 39.95 49.95 49.95 119.95

*Trask Performance Assault Charge Air Cleaner Drag Specialties Pop-Up Gas Cap *Techno Research Dongle Direct Link Delphi

529.95 59.95 318.95

Drag Specialties Black 5 3/4˝ Bottom Mount Headlight Custom Dynamics True Black Probeam LED Headlight Drag Specialties Headlight Mounting Block Badlands Custom Cycle Products Can bus Load Equalizer (2) Badlands Hi-Low Intensifier

Joker Machine Amber Rat Eye Front Turn Signals Joker Machine Red Rat Eye Rear Turn Signals Joker Machine Black Adapter Plates for Side Marker Lights Drag Specialties License Plate Side Mount Custom Dynamics LED Lighted License Plate Frame Kuryakyn 1 1/4˝ Side Mount License Plate Mount Bracket

59.95 449.95 8.95 119.90 59.95 124.95 99.95 54.95 101.95 34.95 34.99

*Trask Performance Assault 2-1 Stainless Exhaust System Ken’s Factory Vanquish Rocker Box Covers

Ken’s Factory Vanquish Cam Cover

Cometic Cylinder Base Gaskets Cometic Head Gaskets

*S&S Quickee Pushrod and Cover Kit

*S&S Sidewinder Valve Spring Kit *S&S 550C Cam Kit

S&S Lifter Guides

Feuling 12 Point Stainless Engine Fastener Kit Diamond Engineering 7/16-14 x 2, 12 Point Bolts (5pk)

2018 H-D FXFBS FAT BOB

Hefty rubber front and rear cements the hot-rod style.

They are Pirelli Night Dragons sized 180/55-18 with Legend Suspensions upgrades front and rear.

999.95 1,600.95 459.99 23.95 44.95 259.95 299.95 189.95 44.95 249.95 44.75

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES �����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

27

P R O D U C T

S H O W C A S E

HANDLEBARS

On the Rise

Handlebars and Wiring Kits

wiring kit is needed and give the corresponding Drag Specialties part number.

The LA Choppers Hero Kit made its debut at The Prime Ape handlebars from LA Choppers the NVP Showcase in are aggressively styled, but built for great Madison last fall, where control and comfort, even for all-day riding. it was a popular new A Choppers is showing off its design expertise product thanks to a with two new game-changing products. The combination of price, ease of use and convenience. The Prime Ape handlebars are a new, aggressive style Hero Kit is designed to alleviate the headache of running that challenge the traditional ape hanger look, internal wires through a handlebar. The kit comes with a while the Hero Kit is a handlebar wire install kit designed chain, wire sheathing and a clasp. to make handlebar swaps easier than ever.

The process for running wires is simple. Using the clasp, The Prime Ape handlebars might have an aggressive style, attach the chain to the wire sheathing. Drop the chain but they are designed for all-day riding. They are easy into the cut slot on the new handlebars, and the weight of to install thanks to the precision laser cuts and robotic the chain makes it easy to pull the sheathing through to welds, especially when used in conjunction with the LA the other end of the bar. From there, the wires can be fed Choppers Hero Kit. all the way through the sheathing, which can be pulled to the right length and trimmed where necessary. With a The bars are on the narrow side for ape hangers, measuring retail price of $30, the Hero Kit is an ideal add-on for any in at just 35½ inches wide. Height options include 10 inches, handlebar sale. ■ 13 inches and 16 inches, and everything is constructed from 1¼-inch double-walled U.S. steel. The bars are available in a Talk to your Drag Specialties rep for more details about the chrome, gloss black or flat black finish.

Prime Ape handlebars and the time-saving Hero Kit from LA Choppers. You can also learn more at https://lachoppers.com.

These Prime Ape handlebars are available for most Harley-Davidson models, and they are designed With LA Choppers’ Hero Kit, custom handlebar installation is a snap. The to be compatible with many different device makes it easier to thread internal wires through the handlebars. options. The bars work with a hydraulic clutch, and they are compatible with fly-bywire throttles. For colder weather, the bars work with the factory heated grips. The Road Glide fitment is packaged with black control clamps and a slot for the stock pin.

L

»»

The 10-inch and 13-inch Prime Apes can use the stock cables, and LA Choppers offers proper length cable and wiring kits for other heights. When in doubt, a dealer just needs to visit www.handlebarcables.com for an easy cable kit guide based on the bike model and year, and the LA Choppers handlebars being installed. Plug in the information and the site will specify which

28

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

COMFORT

STYLE

SUPPORT

11” KAGE FIGHTER-T HANDLEBARS WITH PULLBACK AND FUSION GRIPS FEATURED ON A 2018 SOFTAIL

KAGE FIGHTER-T #0601-4460, GRIPS #0630-1634, HERO WIRING KIT #3850-0443

COMPLETE CABLE KITS

HANDLEBARCABLES.COM

CLUTCH LINES & CABLES · THROTTLE / IDLE BRAKE-ABS / NON-ABS · ELECTRICAL EXTENSIONS

TO SEARCH CABLE FITMENTS FOR YOUR MODEL

LACHOPPERS.COM

MADE IN THE USA

657.200.3850

@LACHOPPERS

P R O D U C T

S H O W C A S E

LIGHTING

Custom and Customer

LED Lights and Buyer Satisfaction

When a customer comes calling, Custom Dynamics is on it. Not only does its online help center help answer common questions, its in-house support tickets help expedite dealer and customer inquiries.

W

hen Dave Pribula founded Custom Dynamics back in 2002, his idea was to have a company that was about more than just high-quality LED lighting products and electrical modules. From the start, outstanding customer service has been just as important as the products Custom Dynamics sells.

Even when Custom Dynamics was a fledgling company operating out of Pribula’s home, the company focused on being quick and attentive with customers. That is still part of the routine today, with most customer and dealer calls and emails returned the same day. The email option is especially effective for customers who are outside the time zone of the Custom Dynamics headquarters in Youngsville, NC. Pribula often answers emails over the weekend, too.

To ensure that every customer or dealer inquiry is resolved, Custom Dynamics uses a program called Zendesk to create an internal support ticket. Both the company and the customer can open a ticket, and both parties can keep track of its progress.

As a part of its customer service commitment, Custom Dynamics also offers a generous warranty for its products.

All of the LEDs have a lifetime warranty, and the electrical modules have a five-year warranty. The way Pribula and the team at Custom Dynamics see it, the LEDs should be the last lighting purchase ever made for that part of the motorcycle.

Another aspect of customer service is listening to what motorcycle riders want in a product. Custom Dynamics has recently expanded the ProBeam line, which uses automotive-grade LEDs to produce an even brighter light output with a wider viewing angle than stock.

Some customers were asking for ProBeam inserts that could be paired with the stock light housing, so Custom Dynamics complied. There are now several ProBeam turn signal insert options for various Harley-Davidson applications.

Riders who want to stick with the complete package can still opt for the entire housing and lighting system, including several options that retain the look of the stock lens. The Complete ProBeam Dynamic Ringz Universal Turn Signal has an aluminum bullet housing with a chrome or gloss black anodized finish. The ProBeam LED Dynamic Ringz Turn Signal Inserts inside are covered by a DOT and SAE compliant smoked lens.

Similarly, the Complete ProBeam Red Universal Turn Signal for the rear has red LEDs topped with a red lens, while the Complete ProBeam Solid Amber Universal Turn Signal has the compliant amber lens in front of the LEDs. ■

»» Talk to your Drag Specialties rep for more information

about Custom Dynamics and its dedication to customer service. Learn more at www.customdynamics.com.

Custom Dynamics has expanded its ProBeam line to include turn signal inserts that work with the stock light housing, as well as several options that retain the look of the stock lens.

30

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Everything to Light Up Your Ride!®

ProBEAM® Rear Turn Signals

ProBEAM Fillerz®

®

Vector 3d Logo on Black

ProBEAM Taillight

®

TruBEAM® Roadglide Headlight

Batwing Windshield Trim

ProBEAM® Headlight & Passing Lamps

ProBEAM Front Turn Signals ®

www.customdynamics.com Youngsville, NC 27596 . Toll-Free: 1.800.382.1388 Phone: 919.554.0949 . Fax: 919.882.9611

ProBEAM® Front Turn Signals

P R O D U C T

S H O W C A S E

CUSTOM TUNERS

Fuelpak Pro

Next-Generation Dyno Tuning

The Fuelpak Pro Wideband Tuning Kit includes a pair of 18mm wideband Bosch oxygen sensors and their leads, which connect to a control module that’s installed in-line between an FP3 and a motorcycle. Once installed, Fuelpak Pro unlocks a whole new set of features in the FP3.

T

he Fuelpak FP3 has been one of the most successful products Vance & Hines has ever introduced, and the company has been innovating in this industry for decades.

Easy to hook-up and use, it connects wirelessly to a smartphone allowing your customers to flash new performance tunes right into their bike’s ECU. An AutoTune feature using the OE factory sensors adds yet another layer of precision-tuning capability. These functions, as well as features like the FP3’s ability to read and clear diagnostic codes and display live sensor data, has made Fuelpak FP3 the success it is.

Now there’s the Fuelpak Pro, the next generation of Fuelpak technology. Aimed at the professional dynotuner, Fuelpak Pro is a powerful evolution of Fuelpak. The Fuelpak Pro gives pro-tuners with dynamometer access to all the tools needed to tune for any combination of performance parts and engine upgrades.

The Fuelpak Pro Wideband Tuning Kit includes a pair of 18mm wideband Bosch oxygen sensors and their leads, which connect to a control module that’s installed in-line between an FP3 and a motorcycle. A quick plug-and-play setup, once installed Fuelpak Pro unlocks a whole new set of features in the FP3.

Able to collect four times the data with greater accuracy thanks to those Bosch wideband sensors, the Fuelpak AutoTune feature becomes much more powerful and fast. Full custom-mapping sessions can be completed in as little as 15 minutes.

Additionally, every dealer and shop using the Fuelpak Wideband Tuning Kit receives a private account on the new Vance & Hines Fuelpak Pro dealer-exclusive cloud server. Dyno-tuned maps can be uploaded, saved and added to a private library of FP3 maps accessible through the app or any web browser. Fuelpak Pro is a complete ecosystem for creating, storing and delivering custommaps to FP3 users worldwide.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 32

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

VANCE & HINES

Aimed at the professional dyno-tuner, Fuelpak Pro is a powerful evolution of Fuelpak. The Fuelpak Pro gives pro-tuners with dynamometers access to all the settings needed to tune for any combination of performance parts and engine upgrades.

Thanks to the Fuelpak Pro, the tuning possibilities are virtually unlimited. Not only can air/fuel ratio tables be edited, the front and rear cylinder volumetric efficiency tables can be analyzed and adjusted individually.

Front and rear cylinder spark advance can be also be adjusted to take into account engine, air, and cylinderhead temperatures.

Other features include the ability to manipulate performance-enrichment tables to add extra fuel and reduce spark timing as required. Throttle blade control tables are adjustable to deliver precise, and crisp, throttle response on fly-by-wire equipped motorcycles.

Using AutoTune, maps can be quickly and easily created to meet the requirements of the motorcycle being tuned and any combination of parts that may be on it. With Step Test intervals every 250 rpm and Sweep Tests starting at 1,500 rpm, the volumetric efficiency delta values, or the

difference between those on the starting map and the data that was acquired, will be displayed. Typically, a bike can be brought into a perfect tune with just one or two AutoTune sessions, at which point that map can be flashed to the motorcycle.

As great as all these new capabilities are, there are also some perks for the dealership or shop. To begin with, Fuelpak Pro does not marry itself to any one vehicle. Fuelpak Pro can be used again and again on multiple vehicles.

Each motorcycle tuned, of course, will require its own Fuelpak FP3 that is left on the motorcycle for the customer after the bike has been mapped. So, in addition to charging for a custom tune and dyno time, there’s the sale of a Fuelpak FP3 – a nice upsell for the store. ■

»» Talk with your Drag rep for details and check out

www.vanceandhines.com for more information.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES �����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

33

F E AT U R E

DRAG SPECIALTIES DEALER RIDE

S P E C I A L

RIDING UPCOUNTRY

T

here are many details involved to produce a successful dealer ride, but the managers at Drag Specialties know the main ingredient is great roads. While previous rides have gone through the Redwoods of Northern California, the Black Hills of South Dakota, the Rocky Mountains and many more

36

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

OCTOBER 27-30, 2018 • GREENVILLE, SOUTH CAROLINA Stor y by D on Emde Photos by Sara Liberte and Don Emde

wonderful areas, this year’s routes in the northwest corner of South Carolina—known locally as the Upcountry— were as good as it gets.

The 2018 Drag Specialties Dealer Ride, based at the Embassy Suites Greenville Golf Resort & Conference Center

�����������������������������������������������������������������������������������������������������������������������������

in Greenville, SC, began on October 27th. Drag welcomed the arriving dealers that morning who had qualified for this year’s ride, along with participating vendors, sales reps and management from the home office, including LeMans Corporation’s president Mike Collins.

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

37

DRAG SPECIALTIES DEALER RIDE

S P E C I A L

38

F E AT U R E

PERFORMANCE ALLEY / MEET & GREET Drag vendors were set up in the hotel parking lot the first day to talk with the dealers and hand out t-shirts and other swag.

When the sun went down, the band arrived and everyone enjoyed the atmosphere and camaraderie of the other attendees.

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Predator SeatS FOR ARLEN NESS AND PAUL YAFFE’S BAGGER NATION TANKS

• Seats have been contoured for a perfect fit with the Ness winged gas tank, the Yaffe 6-gallon gas tank or the Razorback gas tank • Molded flexible urethane foam interior for maximum comfort and styling

seats.dragspecialties.com Manufactured by Drag Specialties in the U.S.A.

• Available in Mild stitch or Faux Suede Double Diamond stitch • Additional coverings, thread colors and stitch patterns are available through our custom seat program

DRAG SPECIALTIES DEALER RIDE

S P E C I A L

40

F E AT U R E

LET’S RIDE! Two days of riding through the mountains northwest of Greenville

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

The Master of Ceremonies, Rob Buydos, enjoying lunch at Maya’s Grill in Brevard, NC.

Drag Regional Manager Rob Bluma (right) provided a little on-road repair for LeMans President Mike Collins.

Spotted in Brevard are (from left) Paul Devine from S&S Cycle, Tom Motzko and Shannon Reinhart from EDZ H-D Motorcycle Service makes the ride a little Glenn Philipp from Drag Specialties, and Mark Hyder from Hyd-Out Cycles. more interesting for his passenger.

Since it was just a few days before Halloween, Pumpkintown was a popular stop.

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

41

DRAG SPECIALTIES DEALER RIDE

S P E C I A L

42

F E AT U R E

BANQUET TIME After two great days of riding, the group gathered for one last dinner together before departing the next day for home.

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Make Your Mark.

Road Warrior Fairing w/ a 11” windshield on Colby Bennard’s, @hcbennard, Dyna Low Rider.

MADE IN MEMPHIS | #ShadyMark

memphisshades.com

DRAG SPECIALTIES DEALER RIDE

S P E C I A L

F E AT U R E

AWARDS AND RECOGNITION 2018 DRAG SPECIALTIES DEALER RIDE AWARDS RECIPIENTS POKEY – Chino Halpin, Metro Harley-Davidson GOOD SAMARITAN – Greg Dornau, Star Brite/StarTron LITTLE RAY OF SUNSHINE – Gerri Loring, Metro Harley-Davidson FURTHEST TRAVEL ON A BIKE – Bob Beattie & Dennis Webb,

City Cycle Sales

Drag Specialties National Sales Manager and ride organizer Jim Matchette welcomes the largest crowd yet for a Drag Specialties Dealer Ride to the banquet on the final night.

TRAILERED THE FURTHEST – Clay Sowards, Barely Legal Bikes TOW MATER AWARD – Ogre Miller, EZ Riders Bikes & Trikes I HAD A MOMENT AWARD – Steve Reid, Direct Cycle Parts JARED MEES AWARD – Mike Collins, LeMans/Drag Specialties,

President & CEO DEALER OF THE YEAR – Margaret Nicastri & Roy Chamberlin, C&C Cycle

The participating Drag Specialties vendors whose generous special offers and personal involvement made the 2018 Dealer Ride a big success.

R I D E PA RT I C I PA N T S: Alberghine, Adam Drag Specialties; Anderson, Anthony Freize Harley-Davidson; Anderson, Eric Indianapolis Southside H-D; Anderson, Quanita Freize Harley-Davidson; Barrett, Meagan Custom Dynamics; Beattie, Bob City Cycle Sales; Bennard, Colby Bumpus H-D of Memphis; Bentley, Eric Black Stock Motorcycle Co; Bjonfald, Shawn Edge Advertising; Bluma, Rob Drag Specialties; Bobby, Nick Drag Specialties; Bradstock, Nick Harley-Davidson Louisville; Brain, Jon FTF Cycles; Brinkman, Jared Barely Legal Bikes; Brown, Becky Drag Specialties; Butler, Reggie Bumpus H-D of Memphis; Buydos, Rob Drag Specialties; Campbell, James Trask Performance; Carroll, Sean Hannum's HD of Sellersville; Casel, Seth McGrath Dubuque Harley Service; Cashwell, Bob Drag Specialties; Chamberlin, Roy C & C Cycle; Christenson, Matt Eastern Performance Cycles; Christophersen, Loren McGrath Powersports; Church, Jim Bumpus H-D of Memphis; Collins, Mike Drag Specialties; Coulson, Debbie Steve's Bike Shop; Coulson, Steve Steve's Bike Shop; Counterman, Tony Barely Legal Bikes; Coury, Lance Feuling Parts; Cox, Steve California Phil's; Creel, Randy Cobra; Crisp, Jason 1 Forty 1 Speed Cycles LLC; Crisp, Stephanie 1 Forty 1 Speed Cycles LLC; Crowe, Mark Crowe's Motorcycle Co; Dahmer, John Hoban Brothers; Delshadi, Sean Performance Machine; Devine, Paul S&S Cycle; Dewey, Jen Dunlop Motorcycle Tires; Dewey, Scott Dunlop Motorcycle Tires; Dornau, Greg Star Brite; Duncan, Jeremy Bassani Xhaust; Echert, Dave Saddlemen; Eick, David Iron Town HarleyDavidson; Emde, Don Drag Specialties Magazine; Engen, Wayne Rollin Thunder Dyno; Erikson, Stephen Erikson Media Video; Erikson, Austin Z1R; Fentzke, Pamela Performance Fabrication Inc; Fentzke, Scott Performance Fabrication Inc; Fischbach, Dave Suburban Harley-Davidson; Flatmoe, Eric Legend Suspensions; Fossler, Dawn Ciro; Fossler, Mark Ciro; Fuellman, Eric JJ's Cycle; Gabriel, John Performance Machine; Gassmann, Gage McGrath Powersports; Gebel, Bob "Clack" St. Charles Harley-Davidson; Gebel, Cindy St. Charles Harley-Davidson; Gilbane, Matt Gilbane Motorsports LLC; Glush, Marko KB Performance; Griffin, Scott Pirelli; Grimaldi, Vince Prestige Custom Cycles; Grose, Kirk Drag Specialties; Halpin, Chino Metro Harley-Davidson; Hoban, Tyger Hoban Brothers; Hochreither, Greg RevZilla.com; Hodges, Maureen Oceana Cycles; Hodges, Trey Oceana Cycles; Hoffman, Kyle Custom Dynamics; Houpt, Joe Suburban Harley-Davidson; Hubbell, Thomas Man O War Harley-Davidson; Hughes, Denise Jim's Machining; Human, Martin Tecmate; Hyder, Mark Hyd-Out Cycles; James, Alexandria Tobacco Road Harley-Davidson; James, Brandon Tobacco Road Harley-Davidson; Johnson, Meagan Drag Specialties; Kay, Will Mid-America Cycles; Klock, Kyle FTF Cycles; Knobbe, Jan Chariots of Fire Customs LLC; Knobbe, Reine Chariots of Fire Customs LLC; Kobernusz, Ashley Dakota Digital; Kobernusz, Josh Dakota Digital; Kreofsky-Rodgers, Jennifer Columbia Harley-Davidson; Larson, Eric Trask Performance; Larson, Tracy Spaz Cycle; Leatherman, Luke Feuling; Lessnaw Jr., Randall Woodstock Harley-Davidson; Lima, Chris Lima Motorsports; Lima, Jamie Harley-Davidson of Cool Springs; Lindsey, Bill Star Brite; Little, Doug Battle Creek Harley-Davidson; Littlewood, Emily Precision Powersports; Long, Tina Smoky Mountain Harley-Davidson; Long, Todd Smoky Mountain Harley-Davidson; Loring, Gerri Metro

44

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

The Drag Specialties sales team at the Upcountry Run. The final award of the night was for the annual Dealer of the Year. From left are previous winners Scott and Pamela Fentzke from Performance Fabrication and Doug Westbrook from Doug’s Custom Cycle. In the center are this year’s recipients Margaret Nicastri and Roy Chamberlin from C&C Cycle. Emcee Rob Buydos is on the stage with the 2017 winners Steve and Debbie Colson of Steve’s Bike Shop on the right. Editor’s note: Margaret’s passion for motorcycling was evident as she didn’t let a slide-out incident on the road earlier that day keep her from attending the banquet.

Harley-Davidson; Lynch, David Gilbane Motorsports LLC; Magnussen, Carl Drag Specialties; Matchette, Jim Drag Specialties; Mathers, Steve Watts Audio and Cycle Works; McClellan, Andy JW Speaker; McCreary, Mike St. Joe Harley-Davidson; McDonald, Josh Bumpus H-D of Memphis; Melton, Blake Drag Specialties; Messner, Shane Michelin Tires; Meyer, Peggy KB Performance; Miller, Eric Michelin Tires; Miller, Ogre EZ Riders Bikes & Trikes; Miller, Sharon EZ Riders Bikes & Trikes; Mills, Larry DP Brakes; Moore, Jeff Indianapolis Southside H-D; Moore, Steve Black Stock Motorcycle CO; Motzko, Tom Drag Specialties; Murphy, Sue R.P. Performance Cycle; Murray, Amy S & M Cycle Works; Murray, Kiley S & M Cycle Works; Musick, Brian Volunteer Cycle Sales; Musick, Bundy Volunteer Cycle Sales; Narney, Chris Mid-America Cycles; Ness, Alessandra Arlen Ness; Ness, Zach Arlen Ness; Nicastri, Margaret C & C Cycle; Nutzmann, Jamie Mustang Seats; O'Malley, Alexander Woodstock Harley-Davidson; Ailas, Tyler NAMZ Custom Cycle Products; Perry, Rick Vance & Hines; Pesdirz, Mike "Pez" Hogtunes, Inc; Pesdirz, Susan Hogtunes, Inc; Petchney, Jerred Drag Specialties; Peterson, Brad Drag Specialties; Philipp, Glenn Drag Specialties; Pike, Dan FTF Cycles; Pitt, Bill Drag Specialties; Pittelko, Tom Lima Motorsports; Porter, Tyler Pirelli/Metzeler; Putman, Jim Mid-America Cycles; Ramsey, Roy Mid-America Cycles; Reid, Steve Direct Cycle Parts; Reinhart, Shannon EDZ H-D Motorcycle Service; Richards, Jarrett Hannum's H-D of Sellersville; Ring, Cory Drag Specialties; Robins, Chris Hyd-Out Cycles Tech; Rodgers, Jason Columbia Harley-Davidson; Roxberry, Scott NAMZ Custom Cycle Products; Rusch, Billy Rollin Thunder Dyno; Sanchez, Frank Direct Cycle Parts; Liberte, Sara Sara Liberte Photography; Savginac, Jay Z1R; Schlueter, Rob Saddlemen; Schmidt, Jacob McGrath Dubuque Harley-Davidson; Sheedy, Todd Drag Specialties; Shell, Michael Mustang Seats; Shrum, Melissa Revolution Performance; Shrum, Rodney Revolution Performance; Silvernail, Matt Legend Suspensions; Smitka, Kevin Drag Specialties; Sommervold, Kathy Drag Specialties; Sowards, Clay Barely Legal Bikes; Staniak, Jason S & M Cycle Works; Steiker, Deb Battle Creek HarleyDavidson; Strader, John RevZilla.com; Suddeth, Phil California Phil's; Sullivan, Brian Drag Specialties; Tejeras, Eddie Vance & Hines; Teson, Buzzy JJ's Cycle; Thiessen, Jim Jim's Machining; Thurber, Rob Crowe's Motorcycle; Tracy, Joe JT's Cycles; Tracy, Pam JT's Cycles; Trimmer, Terry St. Joe Harley-Davidson; Porter, Troy S & S Cycle; Trueblood, Ryan Blackstock Motorcycle Co.; Tucker, Jamie LA Choppers; Tucker, Marshall LA Choppers; Turek, Rich Prestige Custom Cycles; Ulrich, Scott Yuasa; Usher, William Spaz Cycle; Valentine, Brian Battlefield Cycle Works; Valentine, Julie Battlefield Cycle Works; Van Orden, Michael Harley-Davidson of Cool Springs; Wadley, Marcus Direct Cycle Parts; Warnick, Lindsey McGrath Hawkeye Harley-Davidson; Watts, Shawn Watts Audio Cycle Works; Webb, Dennis City Cycle Sales; Westbrook, Doug Doug's Custom Cycle; Westbrook, Pam Doug's Custom Cycle; Wetzel, Ray R.P. Performance Cycle; Whitmor, Brian Eastern Performance Cycles; Wiebel, Charles McGrath Hawkeye Harley-Davidson; Williams, Jason Precision Powersports; Wolf, Cody Bel-Ray; Wolf, Kayla Bel-Ray; Zander, Nick Drag Specialties; Zerby, April EDZ H-D Motorcycle Service; Zimmermann, Chad Drag Specialties. ■

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

45

P R O D U C T

S H O W C A S E

CLUTCH UPGRADES

Stronger Than Stock

Clutch Upgrades for Late Model Big Twins

Once your Harley-Davidson riding customers upgrade to one of Barnett’s direct-fit upgraded clutch kits, they can show it off with the Scorpion Series clear derby covers.

D

o just about anything performance oriented to a big Harley-Davidson, add new pipes, a freeflowing filter or a cam or big-bore swap and it isn’t long before the need for a stronger-thanstock clutch shows up.

In fact, if that Harley is a Touring model and it’s routinely ridden two-up and loaded down, a stronger clutch can become a necessity no matter if that bike has been hotrodded or not.

In either case, modified bike or stock, when a Harley riding customer senses the need for a better clutch, Barnett has what he or she is looking for. The lineup of upgraded options covers everything right up to the newest 2018 and 2019 models.

One of the latest additions to this long list of HarleyDavidson clutches is their direct-fit upgraded clutch kits for the 2013 and later CVO/SE Big Twins and all the 2017 and later Touring models that use Harley-Davidson’s assist and slip clutch.

It’s not uncommon to discover the need for a new clutch basket during a clutch-replacement session. Barnett has those. In truth, upgrading the basket isn’t a bad move in any case and the Barnett basket is certainly an upgrade.

Precision machined from tough 2024-T3 billet aluminum, and hard anodized, it’s a few steps up from OE in quality, durability and smoothness of operation. For anyone

46

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

Barnett’s clutch kits for Harley-Davidson CVO/SE Big Twins and later model Touring bikes provide smooth operation and better quality than the OE setup.

wanting to show off all this new hardware there are Scorpion Series clear derby covers – a finishing touch that offers an unobstructed view into that new clutch.

In the business for more than 70 years, all of these late-model products reflect that experience and know-how. The clutch kits feature segmented Kevlar friction plates designed for increased oil flow, longer life and smoother operation.

There are also full sets of tempered-steel/precisionmachined drive plates and heavy-duty clutch springs included. Every kit is quality checked for exact stack height to guarantee a perfect fit and optimal performance. And, it’s all made in-house by Barnett.

That same attention to detail, quality and performance is there in the upgraded baskets and clear Scorpion Series covers. The baskets are a direct bolt-for-bolt replacement on the stock ring gear/primary sprocket and Barnett supplies the hardware.

The clear Scorpion Series derby covers with their polycarbonate window are firmly secured and sealed with an O-ring gasket and an outer cover that’s CNC machined from billet aluminum and available in chrome or black powder coat. ■

»» Hot rod or not, big Harleys need big clutches and

Barnett has some options upgrades. All this is always in stock at Drag Specialties so ask your rep. There’s more information available at www.barnettclutches.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

P R O D U C T

S H O W C A S E

EXHAUST SYSTEMS

Power Pipes

New Road Rage Fitments system ends with a short-megaphone muffler with a removable baffle and a cool-looking reverse-cone style. The overall look is clean, purposeful and in either style, a Road Rage 2-into-1 is a serious performance statement.

Sure the Road Rage 2-into-1 looks great, is lightweight and offers improved ground clearance over stock, but the real payoff comes when the throttle is twisted. Exhausts with that 2-into-1 design are known for their scavenging effect, their ability to literally pull the exhaust out of the engine for maximized flow, increased horsepower and buckets of torque.

Bassani’s Road Rage III 2-into-1 is a perfect complement to the Harley-Davidson Street Bob Softail’s low-slung, minimal aesthetic.

B

assani’s Road Rage III 2-into-1 pipes have been performance builders for years. All of Bassani’s history, experience and know-how – and that unmistakable exhaust tone – is here in the newest Road Rage versions for the Harley-Davidson Street Bob, Lowrider and Slim.

There are three versions of the Road Rage for those Softail models – an all stainless-steel exhaust, and a mild-steel set of pipes in chrome or black. They’re all packed with everything that’s made the Road Rage 2-into-1 so popular, with the design and fitment optimized for the new generation of Softails and their Milwaukee-Eights.

With a noticeable boost in the lowand mid-range torque coupled with a free-flowing top-end and increased horsepower, the Bassani Road Rage pipes have the full rpm range covered.

In addition to fitments for the Street Bob, Lowrider and Slim models, Bassani has also worked up direction fit applications of the Road Rage 2-into-1 for the Sport Glide, Fat Boy and Breakout models. ■

»» Talk with your Drag Specialties sales rep for details, and check

out www.bassanipipes.com for more information, photos, action videos and sound clips.

As always, these latest Road Rage 2-into-1s start with 1¾-inch diameter pipes that open up to 17/8-inches precisely where they should to enhance the speed and volume of the exhaust-flow.

Those stepped-headers join together into a performancedesigned collector, and the whole

New model Softail riders should get a look at the Road Rage 2-into-1. It backs up its nice performance looks with a noticeable boost in torque and horsepower. Here’s the chrome version on a Softail Slim.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 48

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

BRAKE PRODUCTS

P R O D U C T

S H O W C A S E

Stopping Power

Brake Products for V-Twins

L

ong a purveyor of quality motorcycle components, EBC Brakes manufactures products for a range of American-made V-twin motorcycles.

They include those from Harley-Davidson, and older models from Buell and Victory.

Brake Pads

Drag Specialties Magazine checked in with James Hallett, CEO of EBC Brakes, to learn more about some of the products available through Drag Specialties.

“EBC Brakes operates from four manufacturing plants in the UK and U.S. to produce more than 10 million components each year,” Hallett explained from his office at EBC’s worldwide headquarters in Northampton, UK. “This year that componentry includes a number of offerings for American-built motorcycles.”

Brake Rotors Among the first products Hallett highlights are the range of custom stainless-steel rotors.

These fully floating brake rotors feature stainless steel componentry, with a heat-treated and tempered outer rotor ring featuring a diamond ground finish and a center hub offering a choice of clean black or chrome luster finish.

“A stand-out feature on our floating rotors is EBC’s patented SD or ‘square drive’ button system, which allows the rotor blade to expand and contract freely under heavy braking, effectively eliminating brake vibration and rotor distortion,” Hallett says.

The rotors are available in wide or narrow band options – wide band style is suited for use with OEM-style calipers while the narrow band is for use with smaller aftermarket calipers.

EBC also produce a range of solid mount (non-floating) rotors which bolt on with no modifications required.

EBC brake pads are available in four different grades, each one a good fitment for specific applications.

EBC makes four grades of brake pads for American-built motorcycles: Soft, Medium, Heavy-Duty and High-End. Typically offering a lifetime of 15,000 to 20,000 miles, the Soft pads are made of Kevlar organics and essential on billet or chromed rotors to prevent galling.

The Medium pads are semi-sintered with a high copper content for longer life, and typically provide a lifetime of 20,000 to 30,000 miles, The Heavy Duty pads are fully sintered and made of a Double-H copper carbon alloy compound. They usually have a lifetime of 30,000 to 50,000 miles.

The High End pads are made of premium EPFA sintered copper carbon blend to offer the longest lifetime possible while maintaining a like-new feel. They typically provide between 30,000 to 50,000 miles of use. ■

»» Talk with your Drag Specialties rep about EBC’s product line and get more information at www.ebcbrakes.com

EBC’s range of custom stainless steel rotors are fully floating discs. Their design means the rotor blade can expand and contract under heavy braking, thus eliminating vibration and rotor distortion.

50

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

UK and USA Made Brakes That STOP FAST and LOOK GREAT

UK made stainless steel fully floating rotors improve braking and reduce vibration under heavy braking. If you are still using solid rotors, now is the time to upgrade to a fully floating unit from EBC featuring hardened stainless steel rotor blades, square drive anti lock-up drive buttons and a choice of natural polished stainless HUBS or the latest BLACK CHROME HUBS. These units are TOUGH - no wimpy alloy hubs - ours are STEEL and RIVETED so they never come loose.

Choose from FIVE great pad options …

1. ORGANIC SERIES pads that deliver great feel and low rotor galling, great on front end brakes.

2. SEMI-SINTERED V-PADS™ with orange powder coat paint finish to backing plates.

3. VLD CHROME BACKING PLATE SEMI-SINTERED series pads use the NUCAP® Canada NRS® hook type backing steel enhancement which GUARANTEES pads can NEVER de-bond.

4. EBC USA MADE SINTERED DOUBLE-H™ PADS for long life and strong brake effect.

5. EBC USA MADE SINTERED EPFA PADS for even longer life, totally silent braking and huge braking power.

ORGANIC

V-PAD™

VLD

SINTERED

www.ebcbrakes.com

LED LIGHTING

P R O D U C T

S H O W C A S E

Corner Confidence

Adaptive Lighting for Better Visibility The Adaptive 2 Series LED headlights have an integrated optical system that includes the adaptive low beam and J.W. Speaker’s proprietary ComfortLite™ high beam. It is all housed in a heavy-duty, die-cast aluminum housing that features plug-and-play installation for a wide number of fitments.

A graphic demonstration of how the LED light arrays on either side of the Adaptive 2 Series headlight shows how they illuminate when a bike is cornering or going through a turn.

The Adaptive 2 Series lights have improved function over the previous generation. Previously, the lamps only had adaptive functionality with the low beam. Now, the adaptive functionality will also operate when the high beam is on. This is called Dual Burn® and is a feature J.W. Speaker has added to most of its headlights.

J

.W. Speaker wants riders to master the corners with confidence. The company’s Adaptive 2 Series headlights feature Adaptive technology when using both the high beam and the low beam. These headlights have a ditch-to-ditch light pattern, eliminating dark corners on sharp turns and providing light 1500 feet down the road for a more confident ride.

The LED headlights are “adaptive” because they know when a rider is leaning or turning and they dynamically adjust the light accordingly. The intelligent design helps to eliminate potentially dangerous blind spots when cornering. The targeted LED beam shines right where a rider needs it to see their way safely through corners.

Behind the LEDs are on-board sensors and advanced electronics that calculate lean angles on a real-time basis, automatically directing the lights to coordinate with the path of the motorcycle. Visibility is immediately maximized in key areas of the road that would be left in the dark with standard, non-adaptive headlights.

J.W. Speaker now has new brackets that allow the Adaptive 2 Series headlight to be fitted to Kawasaki and Yamaha motorcycles.

52

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

The “adaptive” feature of the Adaptive 2 Series headlights works with both high and low beam functions.

The headlights come in several sizes, including a 7-inch round fairing style, a 5¾-inch round bucket mount and Road Glide 5¾-inch dual headlights. They are all DOT compliant for street legal use.

Fitments are now more versatile, too. J.W. Speaker has redesigned the rear castings in a way that will allow the company to add to its growing list of fitments, even for metric bike applications.

While the Adaptive Series lights are increasing in functionality and fitments, the price has actually dropped.

All J.W. Speaker Adaptive Series lights have reduced in price by approximately 20 percent. After three years on the market, J.W. Speaker has seen great success with the lights and a constantly growing number of customers.

That growth means that the company has been able to streamline its processes, including manufacturing, engineering and sourcing to achieve economies of scale. The end result is, of course, a better price for customers and an easier sale for dealers. ■

»» Talk to your Drag Specialties rep about the updated Adaptive 2 Series LED headlights. You can also visit www.jwspeaker.com/betterhighbeam.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

MASTER THE CORNERS.

Experience night riding like never before! Adaptive 2™ motorcycle headlights dynamically fill dark

Scan the QR code or visit: www.jwspeaker.com/BetterHighBeam to learn more about the Adaptive 2 Series™

corners with bright, white light delivering a powerful punch of light 1,500 feet down the road for a safer and more confident ride.

#jwspeaker

AUDIO PRODUCTS

P R O D U C T

S H O W C A S E

All-In With Audio The New Whole Hog Kit

M

otorcycle shops are not audio shops. Like all Hogtunes/Wild Boar products, that philosophy is one of the key factors in the new Whole Hog kit from Wild Boar Audio.

The kit starts with three 300W two-channel Class D amps that fit easily inside the fairing. The Class D amps feature Wild Boar Audio’s R.E.M.I.T. technology to ensure superior FM radio reception.

The complete plug-and-play kit includes everything needed for a seamless fit, an easy installation and good value for both the dealer and the customer. The result is a premium audio kit that is a great option, in terms of both quality and money, compared to any OEM offering.

The kit includes 6-inch x 6.5-inch speakers – two for the fairing, two for the rear pods and two for the supplied adaptors made for the Twin Cooled lower fairings. The speakers are weather- and water-resistant, just like a motorcycle speaker should be.

Wild Boar Audio was born out of Hogtunes’ desire to provide top-of-the-line quality audio solutions for

Inside, high-quality components, including an ultraefficient 1.25-inch titanium dome tweeter and a carbon

Wild Boar Audio’s new Whole Hog kit is a complete plug-and-play set-up that makes it easy for your customers to upgrade their Harley-Davidson audio system.

Harley-Davidson riders who want more out of their audio systems. The engineers at Wild Boar Audio are motorcycle riders, too, and they know that what works for a motorcycle audio system is not the same as what works for a car system.

Each Wild Boar Audio product is designed specifically for Harley applications. Every detail is considered, and special care is taken to ensure clear sound, even at high speeds, a design that is easy to install, and a power level that is compatible with the bike’s small charging system.

The Whole Hog kit (p/n 4405-0534) from Wild Boar Audio is a premium 900W six-speaker kit for 2014 and newer Ultra Limited and Trike models. The kit includes everything needed for a complete installation.

54

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

fiber woofer cone, ensure excellent sound quality. No corporate logos on the speaker grills maintain a low-key look that blends seamlessly with the bike.

The Whole Hog kit also includes all mounting plates, wires and hardware required for the installation. Even nylon cable ties are included. The high-grade wiring has factory fit connectors for a true plug-and-play fitment.

Like all Wild Boar Audio products, the Whole Hog kit has a five-year warranty on the speakers and a three-year warranty on the amplifier. ■

»» Talk to your Drag Specialties rep for more information about the Whole Hog kit from Wild Boar Audio. You can learn more at www.hogtunes.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

P R O D U C T

S H O W C A S E

TIRES

Tires for Tourers

Designed Especially for FL Models

Michelin collaborated with Harley-Davidson to develop the Scorcher 31. It is designed and built specifically for Harley’s lineup of FL model motorcycles.

W

hen it comes to tire replacement time for customers on Harley-Davidson Electra Glide Classics, Low Riders, Police Specials, Road Kings, Sport Glides, Street Glides, and Ultra Limiteds, have them check out Michelin’s Scorcher 31 and Commander II tires.

These are tires Michelin designed especially for those heavyweight FLs (FX in the case of those Low Riders.)

The Scorcher 31 and Commander II are tires designed to enhance the way all these big Harleys ride and handle.

56

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

Chances are good some of those riders might already know about the Scorcher 31s. They’ve been original equipment on a number of Harleys, and have been a factory-approved upgrade replacement tire for years.

The Michelin/Harley-Davidson design-collaboration and co-branding of the entire Scorcher lineup goes back to 2007. That long relationship means many of your customers are familiar or have heard of the Scorcher 31’s superb traction in the wet and its supple, comfortable-riding casing design.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

MICHELIN

The Commander II from Michelin will provide your customers with long-lasting performance in wet and dry conditions, as well as a light, nimble feel.

These features combine with the great handling and feel of its specifically-engineered profile for a tire that will look pretty attractive when your customers are ready for new rubber.

With the Scorcher 31 there’s light, nimble handling, especially on winding roads, and the carbon-black enriched compound incorporates all the know-how that Michelin has derived from decades of road-racing experience.

The payoff is a confidence-inspiring grip on both wet and dry roads coupled with excellent durability, all of that coming without any compromise in the tire’s all-around, all-weather performance. The Scorcher 31s are available in a wide range of sizes of fronts and rears covering all the FLs. Another option for FL riders to consider is the ever-popular Commander II. Michelin designed these premium tires specifically for the heavyweight cruiser/touring segment.

Available in 33 sizes, including four alpha-numeric sizes, the Commander II is much more than just a long-wearing tire for a heavyweight Harley.

The Commander II is an all-around performer with great handling and ride qualities, tires that deliver strong traction over both wet and dry road surfaces. They also feature plenty of stability, with a light, nimble feel and excellent feedback in all situations.

�����������������������������������������������������������������������������������������������������������������������������

That performance will stay around for a good long time, too – the added bonus with the Commander IIs is longevity.

Big bike riders report back that the Commander IIs can last more than 20,000 miles on the rear wheel of a Bagger. Chalk that up to the rubber compound Michelin developed just for the Commander II. Michelin also gave these tires a tread pattern designed to reduce irregular wear; a pattern computer optimized to minimize wear while maximizing the amount of rubber on the road. The Commander II’s tread patterns has also been optimized to efficiently evacuate water in wet riding conditions.

The Michelin name and reputation are known worldwide for quality and performance. With the Scorchers, this is accompanied by the Harley-Davidson name, factory endorsement and the Bar & Shield logo right on the sidewall.

With the Commander II tires, it comes delivering plenty of responsive, sportier handling and added longevity. ■

»» The Scorcher 31 and Commander II tires are available now so talk

to your Drag rep for details. To learn more about all of this and really help customers choose the right tires for their FL check out the Scorcher training module at www.michelin-training.net/motorcycle.

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

57

P R O D U C T

S H O W C A S E

BIG-BORE KITS

Price-Point Power

New, Lower Cost Big-Bore Kits affordable in a zero-compromise environment. High quality rarely aligns well with price reduction, but in this rare case, S&S seems to really understand who their buyer is and have done the work to create a part that checks off all the important boxes.

What it did was knock a bunch of dollar signs off those kits so that most of them are now offered at a MSRP of $799. Each kit is still the same high-quality liner wrapped in cast aluminum, and include high compression pistons, rings, clips and gaskets.

The numbers don’t lie – S&S Cycle’s Big-Bore Kits provide a serious performance boost for Sportster riders. Now your XL customers can get all that power for a lower price.

M

any savvy dealers know this already, but for those out of the loop, here’s an interesting fact about the used motorcycle market – Harley-Davidson Sportsters are the No. 1 and No. 2 best-selling used bikes in the country.

Yep, Harley’s venerable XL model outsells all other makes and models, and have been leading the list for quite some time. According to IHS Market Automotive data, in the first 10 months of 2018, there were 40,691 used XL1200 models sold, and 33,048 XL883s sold. Talk about a tremendous opportunity for the aftermarket.

S&S Cycle is keenly aware of this market trend with the Sportster platform, and is even more clued into the buying demographic behind those sales – younger, entrylevel buyers looking for a fun motorcycle at an entry-level price. The Sportster fits that bill.

With an eye firmly on that budget-conscious buyer – and on the likely decision they’ll be looking for a performance boost – S&S Cycle has lowered the cost of its popular Sportster Big-Bore Kits.

“We love the Sportster market and absolutely get that the space is focused on a younger rider, with that in mind we did a deep dive into our XL Big-Bore line, looking to reduce cost without reducing quality or performance” says VP Marketing David Zemla.

The S&S development team in Viola, WI dug in and went through every step of the manufacturing process to scrub out cost, with the sole intention of making these kits more

The development team at S&S went through every step of its manufacturing process to cut costs, but not quality, on the company’s Big-Bore Kits.

For your Hooligan Series racing customers, the Hooligan kit features all of the above, as well as 482 cams and premium tappets for $1,399. All of the kits are available in either 1200cc or 1250cc displacements. There are fitments for most 1986 through 2019 XL models. Finishes are color matched black or silver.

With the average cost of a used Sportster coming in wellbelow $10,000, and closer to the $5,000 – Kelly Blue Book puts a 2010 XL883 Low at $4,940 – XL buyers aren’t looking to spend a bunch of cash, nor do they have a bunch of cash to spend.

This new offering from S&S Cycle is right in their wheelhouse, and Drag Specialties is your source for those newly more-affordable Sportster Big-Bore Kits. ■

»» Talk with your Drag sales rep for details and check out www.sscycle.com for more information.

Sportster riders are a budgetconscious bunch.

Now S&S has put the performance upgrades of a Big-Bore Kit within range of their wallets.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 58

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

PROVEN PERFORMANCE //

SuperStreet 2-into-1 Exhaust for M8 Softail® Models • Classic 2-1 styling and world famous S&S performance!

• Full heat shields on both front and rear headers • Stainless steel header construction • S&S engineered High Flow catalyst (49 state model) brings legal performance to the street!

• Available in Chrome or Ceramic Black Finish • Mid mounts require brake pedal kit (part # 550-0259) • Removable dB reducer (included) meets SAE J2825 sound standard Follow us online

Made in the USA • sscycle.com †DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE *Qualified Manufacturer Declared 49-State Federal Emissions Compliant Catalyst Exhaust System

P R O D U C T

S H O W C A S E

GAUGES

Information Center The New MLX Gauge Series

The MLX-3000 has fitments for early and late model Sportster and Dyna models, as well as 2011 and newer Softail models.

The MLX-8414 is packed with features and fits inside the stock Harley-Davidson gauge bezels.

I

f you want to get technical, Dakota Digital specializes in vacuum fluorescent digital instrumentation.

The high-tech terminology translates to high-tech gauges and gauge sets, including the new MLX series for Harley-Davidson applications.

All four of the new MLX gauge sets dim automatically for nighttime and brighten to a high-contrast mode in the daylight.

The MLX-8414 is a four-gauge direct plug-in digital instrumentation system for all 2014 and newer Road Glide, Ultra Classic and CVO touring models. The set includes a speedometer (which can be set to mph or km/H) with an odometer and dual trip meters, tachometer, oil pressure, oil temperature (sensor included), voltage and fuel level gauges.

If that isn’t enough, additional features include a clock, gear position, 0-60 time, ¼-mile time, ¼-mile speed, high speed and rpm recall, cruise engaged indicator, security, check engine and ABS light. The rider can choose from 31 illumination colors plus color combinations, and the two smaller gauges can be programmed for the rider’s ideal layout. The MLX-8414 retains the existing gauge bezels.

Customers who ride a 1996-2013 Road Glide, Ultra Classic or CVO touring bike can choose the MLX-8600 set of six gauges. The gauges display the same wide range of information as the gauge set for the newer models and the same 31 illumination color options, but in this case four of the gauges can be programmed by the rider for the ideal layout. Dakota Digital offers the MLX-8600 with chrome or black machined aluminum bezels.

60

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

Your customers riding 1996-2013 Road Glides, Ultra Classics and CVOs should check out the MLX-8600. It can display a wide range of helpful information.

Dakota Digital’s MLX-2000 can be programmed to display 31 different colors and can display such features a clock, cylinder temperature, gear position, odometer, and voltage.

The dual-gauge MLX-2000 is for Road King, Fat Boy, Softail, Deuce and Dyna applications, with 4½-inch diameter gauges. Choices include a black or chrome bezel, the 31 illumination colors and the ability to select colors independently.

Features include an adjustable speedometer, bar-type tachometer with adjustable shift point, voltmeter, cylinder temperature (when available), clock, gear position, odometer with two trip meters, service meter, hour meter plus security and low fuel indicators. The two-line message center can display high speed and rpm recall, 0-60 time, ¼-mile time and speed and numeric rpm readout.

The MLX-3000 has the same configuration as the MLX2000, but the gauges are in a 3 3/8-inch housing designed for tank-mounted and handlebar-mounted applications.

The MLX-3000 has fitments for early and late model Sportster and Dyna motorcycles, plus 2011 and newer Softail models.

Dakota Digital designs and manufactures its gauges at its 40,000-square-foot facility in Sioux Falls, SD. The company handles each step of the process there to ensure top quality, from milling the instrument bezels to engraving and cutting the instrumentation lenses. ■

»» Talk to your Drag Specialties rep for more information about the new MLX series from Dakota Digital.

Learn more at www.dakotadigital.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

MLX-8414

2014 & Newer Harley-Davidson Road Glide, Ultra Classic, and CVO touring models.

MLX-8604

1996-2013 Harley-Davidson Road Glide, Ultra Classic, and CVO touring models.

30+ COLORS

MLX-2000 SERIES

MLX-3000 SERIES

4.5”-5” Fat Bob tank dashes found on Road King, Softail, and various Dyna models.

3-3/8” tank and handlebar mounts found on Sportster, Rocker, and various Dyna models.

CALL TOLL FREE 1.800.643.4449

WWW.DAKOTADIGITAL.COM/DS

PARTS & ACCESSORIES

P R O D U C T

S H O W C A S E

Domestic Bliss

American-Made Parts THRASHIN has plenty of Americanmade foot controls, all constructed of aircraft-grade 6061 billet aluminum.

Brake pedal pads, floorboards in two styles, foot pegs and shifter pegs are all part of the lineup. Parts like the P-54 slim foot pegs, available in driver and passenger fitments, really show off THRASHIN’s style.

Each of THRASHIN’s parts, including its range of handlebars, is made in the USA.

T

HRASHIN Supply Company parts don’t have to travel far to get from the drawing board to the production line. Hard parts such as handlebars, foot controls, engine covers and brake reservoir caps are all made in the USA. By keeping things close to home, THRASHIN is able to keep a close watch on the production of each part, monitoring the quality of the raw materials as well as the quality of the finished product. The materials are high-grade, certified domestic options, with 6061 aircraft-grade billet aluminum as the primary starting point for most THRASHIN hard parts.

Each part is produced in a small batch, which makes quality control even easier. The THRASHIN team is able to take a hands-on approach, overseeing each detail, like ensuring the anodizing process includes sealing to prevent fade. And, by sticking to a small-batch production style, any errors that do occur are quickly caught and rectified.

In addition to being made domestically, THRASHIN also keeps things in the family. Owner Lance Coury started the company when he and his friends wanted parts for their motorcycles that they just couldn’t get anywhere else. Coury’s father is a rider, too, and Coury turned to his machine shop to produce the parts that he designed.

Making parts for himself and his friends turned into a business, and these days THRASHIN is still machining its parts on the CNC lathes and mills at the same shop.

Dealers will find a number of THRASHIN parts in the FatBook, including handlebars that come in low-bend, mid-bend and high-bend configurations. The one-inch handlebars are drilled and slotted for internal wiring, and the throttle-by-wire keyholes allow late-style bike fitments. The bars are available in chrome and black.

62

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

The tapered platform peg has a comfortable amount of grip surface, which has a slight radius for easy shifting and braking while still maintaining maximum grip. The 1.375-inch pegs come in a hard-anodized black or raw aluminum finish.

The P-54 foot pegs come in a slim style and an extra grip width that provides plenty of bite for rider and passenger.

Crack open the 2019 FatBook and check out the growing range of products from THRASHIN Supply Company. The derby covers come in both classic and dished styles.

Derby covers and points covers feature both classic and dished styles, and finishes include polished or black anodized/natural. The derby covers include a gasket for an easy swap from stock.

THRASHIN’s signature lightning bolt logo graces the brake and clutch master cylinder covers, available in polished or black anodized. All of the necessary hardware is included for easy installation. ■

»» Talk to your Drag Specialties rep to learn more about

THRASHIN and its made-in-America parts. Find more info online at www.thrashinsupply.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Thrashin Low Bend Handlebar Dyna, FXR, XL, Softail 0601-4141

Thrashin Mid Bend Handlebar Dyna, FXR, XL, Softail 0601-4143

Thrashin High Bend Handlebar Dyna, FXR, XL, Softail 0601-4145

Thrashin Low Bend Handlebar Dyna, FXR, XL, Softail 0601-4142

Thrashin Mid Bend Handlebar Dyna, FXR, XL, Softail 0601-4144

Thrashin High Bend Handlebar Dyna, FXR, XL, Softail 0601-4146

DRAG # 0601-4141 0601-4142 0601-4143 0601-4144 0601-4145 0601-4146

QUICK FIT DYNA/FXR/XL/SOFTAIL DYNA/FXR/XL/SOFTAIL DYNA/FXR/XL/SOFTAIL DYNA/FXR/XL/SOFTAIL DYNA/FXR/XL/SOFTAIL DYNA/FXR/XL/SOFTAIL

DESCRIPTION/SIZING LOW BEND, motostyle LOW BEND, motostyle MID BEND, OG motostyle MID BEND, OG motostyle HIGH BEND, motostyle HIGH BEND, motostyle

COLOR CHROME BLACK CHROME BLACK CHROME BLACK

MEASUREMENTS H 2.5", W 30" , Pull Back 3.5" H 2.5", W 30" , Pull Back 3.5" H 4", W 30", Pull Back 5" H 4", W 30", Pull Back 5" H 5.5", W 30", Pull Back 4" H 5.5", W 30", Pull Back 4"

RETAIL $149.95 $149.95 $149.95 $149.95 $149.95 $149.95

• 1 inch Diameter Bar fits stock Harley Mounts and Controls • Drilled and Slotted for Internal Wiring • Knurled for maximum clamp grip • Fly By Wire Key Holes allow newer style bike fitment Cable throttle bikes will want to purchase the right side bar end adapter (Drag Part # 0634-0331) or cut left side bars for equal length sides.

• Laser Etched THRASHIN® Logo • Made in USA

www.ThrashinSupply.com

800-222-3400 I orders@dragspecialties.com

PRODUCT TESTING

P R O D U C T

S H O W C A S E

Brake Line Compliance 101 A Guide to DOT Requirements

For Magnum Shielding, it’s all about motorcycle rider safety and ease of installation.

This is why the company ensures that its braking products are 100 percent compliant with DOT FMVSS-106 safety requirements.

A

t Magnum Shielding Corporation, DOT Compliance, Product Quality, and Direct Fitment Compatibility are of the utmost importance.

Why? because it’s all about motorcycle rider safety and ease of installation.

Known for being brake line experts, Magnum’s 100 percent compliance with DOT FMVSS-106 safety requirements is important to the many dealers who confidently sell Magnum brake line products to their valued customers.

Did you know that brake hose and brake line assemblies are among the most federally regulated components on a motorcycle? Compliance with DOT is the most reliable way to guarantee that brake lines sold for highway use will hold up to the demanding and harsh conditions they’re subjected to.

The FMVSS-106 Standards require grueling tests which sometimes exceed what a vehicle will actually see in the real world, but this intentional overcompensation protects the rider from real life variables encountered in manufacturing, installations and usage.

These “Torture Tests,” as Magnum calls them, are necessary to ensure brake lines withstand all mechanical, chemical and temperature influences they might encounter, as well as perform consistently in a wide range of seasonal temperatures with a predictable feel and ABS response for the rider. Not only do Magnum’s brake line constructions pass all these tests, but their test scores rank among the highest of the world’s manufacturers, according to the company. Talk about confidence. So, what are these tests and where are they conducted?

Requiring sophisticated equipment, manufacturers most often use third-party testing labs for one-time validation and testing documentation. Magnum however, has duplicated the testing equipment right in-house and

64

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

performs FMVSS-106 testing on an ongoing basis for quality and process validation purposes.

Aftermarket DOT brake lines must be properly labeled with stripes and symbol designations.

• Volumetric Expansion measures the brake hose’s expansion under braking pressures. The lower the brake hose’s expansion the better the braking response will be and feel. Magnum says its industry low expansion is unsurpassed.

• The Whip Test subjects the hose and fittings to enormous flex stresses by whirling at 800 rpm for 35 hours. Magnum lines endure for well over 50-plus hours.

• Burst Strength requires the hose assembly to pressurize to 7,000 psi without bursting. Magnum exceeds 25,000 psi.

• Tensile Strength stretches a brake hose assembly until either the fittings pull off or the hose tears. A fast pull requires no less than 370 lbs.

• The High Temperature Impulse runs for five hours of repeated 295° F heat and 1,600 psi pressure cycling followed by a 5,000-psi burst.

The Water Absorption soaks lines in water at 185° F for 70 hours before again conducting the Tensile, Burst, and Whip tests. There are five other tests and in all cases Magnum brake lines exceed all requirements.

For Magnum Shielding, DOT compliance drives quality standards and supports its mission and dedication to total customer satisfaction and safe riding. The team at Magnum strives to be the best at what they do and is committed to providing the industry with the high-quality products that dealers have come to know and expect. ■

»» Talk with your Drag rep for details on Magnum Shielding’s product line and check out www.magnumshielding.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

SEATS

P R O D U C T

S H O W C A S E

Ripper to Road-Tripper New Seats for the Softail Fat Bob

W

hen Harley-Davidson introduced its 10 new Softail platforms last year, the Mustang R&D team rolled up its sleeves and put its bluecollar Massachusetts work ethic to task. By the end of 2018, the hard work paid off to the tune of more than 30 new seats covering the entire Softail family, with the exception of the FXDR.

STANDARD TOURING

Mustang’s Standard Touring is ideal for average-sized riders comfortable with stock positioning, but want a significant upgrade in comfort and style.

The premium expanded vinyl cover features a unique trapezoid design.

TRIPPER FASTBACK

The sporty Tripper Fastback positions riders lower and slightly further back than stock. Features include detailed stitch work with gunmetal thread and contrasting mesh gripper vinyl in lays.

WIDE TRIPPER The Wide Tripper fills the void between a sporty lowprofile solo and a longdistance touring seat.

With only two pairs of Softail models sharing a common seat pan (Heritage Classic and Deluxe, and Sport Glide and Low Rider) Mustang product development formulated a strategic hit list laying out which models to attack first.

High on that list was the Fat Bob. Labeled one of the performance-minded Softail models, the Fat Bob can remain an aggressive ripper with Mustang’s Tripper Fastback, be transformed into a road tripper with the Standard Touring Solo, or settle somewhere in the middle with the Wide Tripper Solo – all of which are now available through Drag Specialties.

Mustang’s Tripper Fastback features a sleek, low profile design that’s formed to feel as good as it looks. The lowcut driver area is 3 inches wider than stock for improved support in the hip area. The contoured driver bucket and high-rising wall offer excellent lower back support, keeping the operator planted in an aggressive but comfortable position. A streamlined passenger area keeps the low-profile look intact while providing an extra half-inch of width versus stock.

To get as much long-haul comfort as possible out of the Fat Bob, the Standard Touring Solo and Passenger combo is the answer. The solo is a full 6 inches wider than stock.

For maximum lumbar support, riders can opt for the solo with a fully adjustable and removable driver backrest. The receiver is built into the seat pan.

The optional 11-inch wide passenger seats offer comfortable two-up riding with more padding and extra 5½ inches of width compared to stock. The passenger seat extends forward on solos without the driver backrest for added rider support, whereas Mustang’s recessed passenger seats are designed for use with the driver backrest.

Also available for the Fat Bob is Mustang’s popular Wide Tripper solo, which places riders slightly lower than stock but at a similar reach to the controls. Offered with or without the built-in receiver to accept Mustang’s driver backrest, the Wide Tripper solo and separate passenger seats feature an additional 2½ inches of width for the driver and 4½ inches for passengers.

Mustang’s proprietary controlled density polyurethane foam formula requires no break-in period and retains its shape and support after years of use. The marine-grade fiberglass baseplates, proprietary comfort foam and individually sewn covers are proudly handcrafted and assembled in their historic New England facility. ■

»» For more information, talk with your Drag rep today or visit www.mustangseats.com.

66

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

natural selection Bold new seats for '18-'19 softails

DayTripper™ Apex Stitch For ’18-’19 Softail Street Bob, Deluxe & Heritage Classic

Standard Touring Dagger Stitch For ’18-’19 Low Rider & Sport Glide

every seat starts with a passion for riding and a deep-rooted belief in the tradition of quality american craftsmanship. down to every last stitch. mustangseats.com

E V E N T

R E P O R T

A TIRE FOR FREE SPIRITS

NOTES FROM THE METZELER CRUISETEC PRESS RIDE

By Don Emde / Photos by Metzeler except as noted

I

staff from Europe at the top of Mount Magazine State Park, west of Little Rock, AR. As I was being shuttled there from the airport, the twisty road up to the lodge made it obvious to me that this new tire for V-twin motorcycles would surely have more going for it than just good looks and mileage.

In October, the Metzeler marketing team invited myself and a number of other journalists to join them and their R&D

At the technical presentation, the purpose of this tire became clear. The new Metzeler Cruisetec is for the “free spirits” out there who need more than just a cruise down the

t’s not often when a new tire is introduced that the manufacturer feels it is worthy of flying in members of the motorcycling press for an in-person technical introduction, followed by a day on the road to try them out. That is exactly what happened recently with the new Cruisetec™ tires from Metzeler.

68

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

1.

2.

3.

1. The profile and aggressive side-grip design of the Metzeler Cruisetec is seen here.

2. Our destination of the ride was the Cliff House Inn, near Jasper, AR. The lunch was great and the view of the Buffalo National River area was spectacular. Photo by Don Emde 3. Enjoying the side grip of the new Metzeler Cruisetec tires.

Motorcycle journalists from the leading publications in the United States and Canada assembled at the Lodge at Mount Magazine before a day on the roads of Arkansas.

Interstate to satisfy their motorcycle experience. The article that follows on page 70 explains how Metzeler packaged a unique profile and tread pattern with new rubber compounds specifically for performance-oriented V-twin riders who want to enjoy their sporty side in the mountains and country roads—in wet or dry conditions.

Cruisetec-fitted Harley-Davidsons and Indians for a daylong ride through the Ozark National Forest. I really enjoyed the many long-curving roads there, which allowed me to stay over on the edge for fairly long distances to gain the confidence that the Cruisetec tires would hold the road.

Which they did.

There is an old saying that the proof is in the pudding. The following day, the journalists had their pick from a fleet of

It was a fun ride, which is what motorcycling is all about.

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

■

DRAG SPECIALTIES MAGAZINE

69

P R O D U C T

S H O W C A S E

TIRES

Cruisetec Performance

A New Tire for V-Twin Power-Cruising

AVAILABLE SIZES

FRONT • MT90B16 • 130/90B16 • 150/80-16 • 130/80B17 • 100/90-19 • 120/70ZR19 • 130/60B19

REAR • MU85B16 • 130/90B16 • 150/80B16 • 180/60R16 • 180/65B16 • 180/70B16 • 160/70B17 • 180/55B18 • 240/40VR18

Metzeler’s new Cruisetec tires are aimed squarely at the growing number of V-twin riders who are demanding more performance out of their motorcycles.

They’re purpose-built to provide confident cornering, straight-line stability and plenty of control under hard braking.

S

tepping up the pace. That’s what V-twin performance cruising is all about. It’s the preferred sport-style riding a growing legion of enthusiasts on a range of bikes from HarleyDavidson and Indian Motorcycle.

These are customers looking for tires that offer more than just basic, all-condition suitability and extended tread life. After all, performance cruising, especially on late-model V-twin loaded up with lots of electronic rider enhancements, demands more from a tire.

For this growing class of rider, there’s the all-new Metzeler Cruisetec™. This new tire is the most technologically advanced, high-performance tire that Metzeler has ever offered for a V-Twin. Sporting a new carcass design, unique profiles and tread patterns, plus specialized rubber compounds and layouts this tire is laser-focused on custom performance cruising.

70

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

The feature-and-benefits list for the Cruisetec is long and impressive – new profiles and high-curvature contours, specialized compound recipes with unique layouts on both the front and rear tires and a performance-oriented tread pattern. The Metzeler Cruisetec should check off every box on a V-twin performance cruiser’s wish list.

All of those performance-oriented features, and that specialized design means that sport-style riding V-twin customers can expect comfort and control in all conditions and speeds. With Cruisetecs on board the riding will be smooth, stable and seem almost effortless. There are tires set to deliver a lot in both looks and performance for your performance-minded Harley and Indian customers.

The Cruisetec’s shape allows riders to easily take and maintain precise lines with seamless side-to-side transitions. It’s a profile design with a larger and more consistent footprint, a design aimed to deliver improved feedback in both mid- and full-lean situations.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

METZELER

The Metzeler Cruisetec carcass also features a lower cord end-count than typical V-twin tires. It’s another unique structural element that not only fulfills the support and stability requirements for a V-twin tire, but also allows for that larger footprint. It also results in an enhanced level of tire conformability to the road surface and any irregularities.

The tires also offer an increased level of damping performance, grip and road feel here. Cruisetec’s maximized conformability to the road also minimizes groove wander, as well as any vague front-end feel.

Metzeler has also kicked things up with new and specialized compound recipes for the Cruisetec.

The Cruisetec utilizes high-rated plasticizers and silica from sport-touring technologies that are coupled with dual-compound rears and singlecompound fronts. This compound layout targets mileage and stability, in addition to all-around grip in both wet and dry conditions and high-speed performance.

With the Cruisetec compound layouts there’s not only a higher level of braking and acceleration traction when cornering, that dual-compound rear allows for straight-line stability, traction and strength. With 80 percent of the upright footprint standing up straight on the harder center compound of that rear tire, all of that performance lasts for the lifespan of the tire.

In designing the Cruisetec, Metzeler made sure to create front and rear tread patterns that offer enhanced handling and high levels of grip in wet or dry conditions.

Performance is meant to last throughout the tire’s life cycle.

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

71

METZELER

P R O D U C T

S H O W C A S E

The compound of the Cruisetec front tire is just as impressive. Equally performance-oriented, the Cruisetec fronts features a softer compound throughout, a compound custom blended and optimized to match the softer sidestrips of the dual-compound rear tire. The benefits here are

enhanced line-holding ability while leaned over through the curves, coupled with quick, precise directional control when upright.

Both front and rear Cruisetec tread patterns have been designed for enhanced handling, immediate response, a high level of grip even in wet conditions, and consistent performance throughout the tire’s life cycle. The front and rear tread pattern layouts feature compound bridges adjacent to the grooves that are designed to control rubber deflection in the footprint under even the most extreme loadings. The tread pattern is designed to enhance stability overall.

Cruisetec’s converging side grooves ensure immediate directional response, a quick warm-up and a strong mechanical grip. The diverging extended grooves in the patterns aid with braking efficiency, increase support and grip while leaned over, and interact effectively with electronic rider aids such as ABS. All of these features combined result in a tire built specially for your customers in that fast-growing performance-cruising V-twin segment. Whether they’re on Harley-Davidson Sportsters, Softails, Dynas, V-Rods, and even Touring bikes, or Indian Scout, Chief, Chieftain, Springfield, Roadmaster and Darkhorse models, the Cruisetec is made for them. ■

»» They’re also available in a big range of sizes, with 11 fronts and nine rears. Talk with your Drag Specialties for details about the Cruisetec. Get more information at www.metzeler.com.

Not content with simple Sunday cruising, more and more V-twin riders are looking for tires that will perform well during hard riding through the twisties and canyons. The Cruisetec was built for them.

72

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

ALL CURVES LEAD TO CRUISETEC. THE NEW CRUISETEC™. PERFORMANCE PERFECTED. The new performance-oriented tire for V-Twins, designed to upgrade the handling of older and newer motorcycles, featuring remarkable grip in dry and wet conditions, ground-breaking performance consistency and stability features. Discover more on metzeler.com ™

PARTS & ACCESSORIES

P R O D U C T

S H O W C A S E

Armed for the Streets

Introducing the Dillinger Collection

K

Available for 20042019 Sportsters, the Dillinger luggage rack system includes fixed mounting plates that install discreetly between the fender struts and rear fender for a clean look.

uryakyn is celebrating 30 years in 2019, and the new Dillinger collection is kicking off the company’s banner year with a bang.

By all accounts, the Dillinger aesthetic is a hard right from the original ISO-Grips that started it all for Kuryakyn in 1989. The same can be said for many recent designs coming out of Wisconsin.

Kuryakyn’s product development has done a masterful job keeping its loyal customers coming back with fresh offerings, while also attracting new, younger generations of riders with more progressive designs like Dillinger.

The Dillinger headlight trim ring is a direct replacement for most Harley models with 5¾inch headlights and has a rugged grilled design that can be run horizontally or vertically.

Available for a variety of Harley-Davidson multi-fit and Sportster-specific applications, Dillinger design cues include pass-through styling, rugged modular construction and contrasting surface finishes for a tough and gritty industrial look. Finish options include satin black on textured black, or satin silver on textured black with zinc dichromate plating on visible hardware for additional distinctive contrast.

Dillinger foot pegs utilize Kuryakyn’s model-specific splined adapters that offer a variety of fitment options and pinpoint foot peg positioning. The durable all-aluminum construction features a unique pass-through housing with raised top surface for traction, resulting in a lightweight but sturdy foundation for secure footing. Complementing the look is the Dillinger Shift Peg, available as a direct replacement for all Harley models.

Dillinger levers are cast from quality A380 aluminum with a slotted design and thin ergonomic profile for comfortable, controlled pullback. Currently available for all 2014-2019 Sportsters.

The Dillinger Luggage Rack proves that luggage racks don’t have to be run-of-the-mill. Designed for use with a solo seat, this fixed-mount rack system is capable of handling almost any type of luggage with its rigid three-piece design made from durable stamped steel. Stylized cutouts on the top and sides offer multiple secure attachment points for bungee cords or luggage straps, while a slight rise at the tail helps keep the load from sliding back.

Dillinger foot pegs are available with male-mount splined adapters as direct replacements for most Harley models, or without splined adapters for a variety of fitment using Kuryakyn’s model-specific splined adapters (sold separately).

Dillinger Handguards are constructed from a combination of high-impact injection-molded ABS and aluminum. This durable but lightweight solution to protecting your hands from debris or blocking cold air uses the mirror-stem bolt and mount on 2004-2019 XL models for easy installation. ■

»»Talk with your Drag rep for details and visit www.kuryakyn.com to learn more about the new Dillinger collection.

74

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

y t i m r o f n Escape co

Dillinger Luggage Rack

Dillinger Footpegs

Dillinger Hand Guards and Headlight Trim Ring

ALL NEW

TION C E L COL

™

Distinct pass-through styling, contrasting textured finishes and bulletproof durability in a variety of H-D and multi-fit applications.

WWW.KURYAKYN.COM ©2019 KURYAKYN HOLDINGS, LLC ALL RIGHTS RESERVED For additional information on third-party product and company names, please consult our web page at www.kuryakyn.com/legal-notice

P R O D U C T

S H O W C A S E

AUDIO EQUIPMENT

Modern Helmet Hi-Fi

Bluetooth Options for Audiophiles

HSBT-O4EL-FFS only fits full-face helmets

I

n 2018, J&M Corporation celebrated its 40th year of providing audio solutions to the motorcycle industry.

Established in 1978 by John Lazzeroni and Melinda Carevich to meet the recreational audio needs of motorcycle riders, the Arizona-based company grew from operating at a kitchen table to becoming a worldwide manufacturer of mobile audio gear and motorcycle accessories holding many U.S. patents for headsets, microphones and integrated audio gear.

For 2019, J&M’s evolution in audio performance continues with significant advances in its Bluetooth® product lineup – most notable of which is J&M’s new Elite BT-04 Series Bluetooth Helmet Headsets and custom Bluetooth dongles for a variety of factory installed motorcycle audio systems.

Lazzeroni recently gave Drag Specialties Magazine the run-down on this latest offering.

With headsets available for open-face, full-face, flip-up and half-style helmets, the Elite BT-04 Series features boom-style or chin-bar microphones, high-intensity mount-in-helmet speakers, and easy-to-use external controls for on/off, volume and call initiate/answer.

HSBT-O4EL-FFS only fits full-face helmets

Utilizing J&M’s own custom Bluetooth 4.3 software package that easily pairs to most modern personal audio devices, the Elite BT-04 Series offers aptX™ digital stereo audio, a simple secured pairing mode allowing the user to link to other Bluetooth-enabled helmets regardless of brand.

HSBT-04EL-LDC fits flip-up and openface helmets

THERE ARE FOUR MODEL PACKAGES AVAILABLE: • HSBT-04EL-UNV fits full-face, flip-up and open-face helmets • HSBT-04EL-LDC fits flip-up and open-face helmets • HSBT-04EL-FFS fits only the full-face helmets • HSBT-04EL-HHU fits with those half-style, shorty helmets

76

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

Additionally, J&M’s new SmartBlu™ technology allows the helmet to be linked to, and perform properly with, Bluetooth-compatible motorcycle audio systems like those found in the new Harley-Davidson Ultra models and the Indian Chieftain.

Lazzeroni says the control head, powered by a rechargeable lithium power cell providing 14-18 hours of use from a full charge, is easily removable for in-house charging away from the helmet.

Periodic software updates for the headsets and dongles are available for download from the Bluetooth page on J&Ms website, just in case a manufacturer modifies or updates the audio systems on their motorcycles.

“The Elite BT-04 Series joins the Performance BT-03 Series Bluetooth Helmet Headsets, Elite 801 Corded Series and Performance 291 Corded Series,” Lazzeroni says. ■

»» Look for Lazzeroni at the upcoming Drag Specialties

NVP Product Expo in Louisville, KY, and talk with your Drag rep about J&M Corporation and its audio products.

Further details can be found at www.jmcorp.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

NEW

700w RMS POWER! The MOST POWERFUL Amplifier Ever Offered For Your Harley® Davidson Audio System.

For complete information contact: DEALERS: See your Drag Specialties Rep Drag #

©2018 J&M Corporation All rights reserved.

4405-051 0 Complete Kits Avail ab 1998-201 8 Harley B le For aggers

P R O D U C T

S H O W C A S E

SEATING

Instant Upgrade: The Science of Seats More About Gel-Core Technology

Saddlemen has built a reputation among V-twin dealers and riders as a premium solution for seating comfort. The company also has a complete range of luggage and organizers perfect for every type of riding.

Saddlemen seats mount just like stock seats, and swapping out an OEM seat for a Saddlemen model with Gel-Core Technology is one of the easiest ways to increase comfort and enhance the control of a motorcycle. Think of it as a performance upgrade for both bike and rider.

At the heart of Saddlemen’s Gel-Core Technology is its exclusive, high-tech SaddleGel material. The special polymer drastically reduces the road shocks and vibrations that can make a long motorcycle ride uncomfortable. The radical Step-Up seat features both.

Saddlemen CEO David Echert defines comfort as how long a rider can be in the seat. For him and the team at Saddlemen, that comes down to the numbers. The company’s Gel-Core Technology lets riders stay on the road up to 400 percent longer with 92 percent less road shock and 50 percent less road vibration compared to stock seats that only use foam.

Gel-Core Technology is engineered to dampen, divert and deflect energy from the road, and it does so with co-molding technology, which is Saddlemen’s proprietary process of combining comfort foam, progressive density foam and SaddleGel into a single molded component.

F

eeling connected to a motorcycle and to the road really comes down to just three things – hands, feet and seat. Those key body parts maintain contact with the bike, which means they are the areas absorbing every bump and vibration along the way.

The seat is where the majority of a rider’s weight meets the motorcycle, and that means it is the spot where the majority of shocks are felt. Saddlemen is dedicated to making seats that absorb those road impacts and vibrations so the rider’s body doesn’t, and it is the company’s proprietary Gel-Core Technology that is instrumental in keeping riders in the saddle longer without the fatigue and discomfort associated with foam seats.

78

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

SADDLEMEN

The nature of Gel-Core Technology allows each Saddlemen seat to conform to the body sitting on it, which helps to reduce pressure points and eliminate hot spots. In fancy terms, the seat is topographically neutral.

Saddlemen achieves that neutrality for each seat design by experimenting with different tensions across the backrests and seats to determine the ultimate distribution pattern for the foam and gel.

The experimenting goes beyond the seat design at Saddlemen, where chemists are actually on staff to oversee the gel’s unique makeup and production in-house at Saddlemen’s headquarters in Rancho Dominguez, CA. As the team at Saddlemen puts it, Gel-Core Technology is a scientific approach to motorcycle seats.

Your customers will also find Saddlemen’s unique Gel-Core Technology in the company’s solo seats.

SaddleGel is what is at the heart of Gel-Core Technology and the reason chemists are on hand. Officially known as a specially-formulated viscoelastic polymer, Saddlemen has, thankfully, given it the much simpler name of SaddleGel. The dampening and vibration diversion in a Saddlemen seat comes primarily from the SaddleGel, which has enough elasticity to conform to a rider’s body while still providing support. This results in reduced pressure points and better circulation, especially on long rides.

Although Saddlemen believes a rider deserves better than a simple foam seat, foam is still an important element in creating a comfortable, cushioned ride. Saddlemen seats utilize ProFoam, a progressive density foam that provides a carefully-tuned balance between support and compliance.

The foam is made up of varied cell sizes and types, all held in place by a skin that resists outside elements and seals the foam from water. The foam is not finished until the density and shape have been honed in for an ideal support structure.

In all, Saddlemen’s co-molding technology can be broken down into three layers. The top sculpted layer of foam is closest to the rider’s body, providing shape, cushioning and a soft touch. Beneath that, the SaddleGel absorbs vibrations and shocks from the bike below while Saddlemen’s Gel-Core Technology helps reduce pressure points and hot spots, and leads to better circulation, even on long rides.

�����������������������������������������������������������������������������������������������������������������������������

dispersing pressure and promoting blood flow above.

Beneath those two layers, a polyurethane substructure provides the foundation and support for the entire seat.

Saddlemen has been in business since 1987, recently celebrating its 30th anniversary. The company specializes in seats, of course, as well as motorcycle luggage and accessories, all designed with the goal of improving the riding experience for everyone on two wheels.

Drag Specialties carries a full line of Saddlemen products.

Full seats, heated seats, Saddle Skins replacement seat covers, rain covers, repair kits, gel insert pads and seat heating systems are among the many seating options available through Drag. Luggage options include a full array of saddlebags, tail bags, tool bags, adventure packs, organizers and even a carrier for small pets. ■

»» Talk to your Drag Specialties rep to learn more about

Saddlemen’s unique Gel-Core Technology and the company’s complete inventory of seats for all styles of riding. You can visit www.saddlemen.com to learn more.

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

79

NVP PREVIEW

E V E N T

R E P O R T

KENTUCKY BOUND!

PREVIEW: LOUISVILLE NVP PRODUCT EXPO FEBRUARY 16-17

The Drag Specialties Spring NVP Product Expo is essential for dealers looking to get a jumpstart on the selling season. The new location in Louisville, KY promises increased floor space and more than 300 displays.

SHOW HOURS/EVENT SCHEDULES

I

Saturday, February 16

t may look like winter outside, but everyone in the Powersports industry knows that this is the prime time to start preparing for those first days of spring when business kicks off in full swing.

All across the country – yes, even in those areas where winter is merely a suggestion of a season – the industry is busy making plans for the return of riding weather. Dealers are looking for the new, hot products that will be big sellers, and the one place to see all those products under one roof is the Drag Specialties 2019 NVP Product Expo.

Housed in a new location at the KICC Convention Center in Louisville, KY, the spring NVP Product Expo will be the place to be to get the scoop on those great V-twin goodies that will soon be lining dealership shelves.

Not only is the space at the convention center the biggest show floor that Drag Specialties has ever used, the show will feature more than 250 vendors and 350 booths. This means more space filled with all the new riding gear, parts and accessories, and replacement pieces that your customers are seeking.

“It’s going to be the biggest show the company has ever done,” said Jeff Derge, LeMans Corporation’s vice president of sales. “It’s the largest distributor show in America.”

80

S P R IN G N V P H E A D S TO L O U IS V IL L E

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

TWO INCREDIBLE DAYS! • Day 1 Expo: 10 a.m. to 5:30 p.m.

• Dealer Seminars, In-Depth Training Opportunities • Meet & Greet – Sports and Social Club at 4th Street Live!: 5:30 p.m. to 9 p.m.

Sunday, February 17 • Day 2 Expo: 9 a.m. to 3:30 p.m.

• Dealer Seminars, In-Depth Training Opportunities

The NVP Product Expo also features in-depth dealer training from key vendors. There will also be presentations from two surprise vendors and a fashion show.

“We’ll be doing a fashion show for the first time ever, with all the new products from the 2019 spring collections of the big apparel brands,” Derge said.

Given its central location, Louisville is a day’s drive for more than half of the United States population, meaning that getting to the show shouldn’t be a hassle. When the show closes for the day, the city offers premier dining and entertainment options at the nearby 4th Street Live! area.

»» The Louisville NVP Product Expo is your chance to get a leg up on the competition for the 2019 sales season. Talk with your Drag Specialties sales rep for details on how you can attend.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

KEN’S FACTORY

MAGNUM SHIELDING

Your customers can easily mix and match products from Ken’s Factory. The Neo-Fusion spiral shifter peg, spiral grips and spiral dimpled foot pegs make a nice trio.

Stop by the Magnum Shielding booth and check out the company’s Viking Bars, which were specifically designed to make it easier to route a wiring harness.

OPTIMATE

HOLLEY PERFORMANCE/ACCEL

The Drag Specialties/OptiMate 5 is designed to provide a quick charge for a depleted battery. Drop by in Louisville and learn more.

With ACCEL’s spark plug wires, your Harley-Davidson customers can upgrade the OE setup with wires that deliver up to five times more energy to the plugs over stock.

AFX

ICON

The new FX-99 full-face helmet from AFX is available in a number of colorways and designs, including one sporting images of the American flag.

The team from Icon will be on hand with the company’s latest apparel and helmet offerings.

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

PRODUCT PREVIEW

SEE AT THE SHOW / PRODUCT PREVIEW

81

R E P O R T

NVP PREVIEW

E V E N T

K&N ENGINEERING

DRAG SPECIALTIES SEATS

K&N has added to its line of intake systems for your customers’ V-twins with the new *Shaker Intake Systems that are guaranteed to increase horsepower. Learn more in Louisville.

The new Predator III seats from Drag Specialties Seats feature a 6-inch tall driver support with unique styling.

Available for FL, Dyna, Sportster and Softail models.

MICHELIN

THRASHIN SUPPLY CO

Michelin teamed up with Harley-Davidson to develop the Scorcher tire line specifically for the OEM’s motorcycle lineup. The Scorcher 31 is an approved fitment for a range of FL Touring models.

Visit the THRASHIN Supply booth in Louisville to get the scoop on the company’s growing lineup of hard parts and luggage.

FEULING

BURLY

Feuling’s oiling system (p/n 0932-0918) for MilwaukeeEight engines is an upgrade over the stock system. Visit the company’s booth in Louisville to get all the details.

These throw-over saddlebags are the latest addition to Burly’s luggage lineup.

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 82

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

R E P O R T

NVP PREVIEW

E V E N T

PROGRESSIVE SUSPENSION

PERFORMANCE MACHINE

Progressive Suspension will be showcasing its new 465 Series shocks for Milwaukee-Eight Softails. There are two versions: A mono shock and one with a remote preload adjustor.

The *MAX HP air cleaner from Performance Machine is designed to provide improved knee clearance and a nice performance boost.

MUSTANG

VANCE & HINES The *stainless steel 2-into-1 upsweep exhaust system from Vance & Hines is engineered to maximize torque and power from the Milwaukee-Eight engine.

The Mustang Seat DayTripper for 2018-2019 Softail Heritage Classic and Deluxe features a custom look and rider-friendly ergonomics that place the operator lower and slightly further back compared to stock. Check it out at NVP.

MEMPHIS SHADES

SADDLEMEN

Get a look at Memphis Shade’s new Road Warrior windshield for the Harley-Davidson Sport Glide. It adds a stylish and aggressive profile to that hot-rod motorcycle.

Saddlemen’s new R1300 LXE Tactical Deluxe Roll Bag with universal mounting system can be added to any sissy bar, backrest or luggage rack. It’s part of the company’s new Tactical lineup.

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 84

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

HOGTUNES/WILD BOAR AUDIO

Late in 2018, Avon Grips announced its range of Heated Grips was returning to the market, and to the FatBook. The grips come complete with everything needed for a quick installation.

The Whole Hog kit from Wild Boar Audio is a plug-andplay upgrade for your Harley-Davidson customers looking to add a hassle-free premium audio system.

LEGEND SUSPENSIONS

DYNOJET

Give your customers a suspension upgrade, front and rear, with Legend Suspensions range of air-ride shocks and cartridge-style forks.

The new *Power Vision (version 3.0) for Indian motorcycles from Dynojet is a flash tuning system that will allow your customers to tap into their motorcycles’ hidden horsepower and performance.

DRAG SPECIALTIES

COASTAL MOTO

Check out the Drag Specialties booth and see the wide selection of Drag-branded products like *exhausts, brake components, cables and wheels.

Coastal Moto has three new forged wheel designs, including the Fuel in black. Learn more at the NVP.

PRODUCT PREVIEW

AVON GRIPS

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES �����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

85

R E P O R T

NVP PREVIEW

E V E N T

S&S CYCLE

GALFER USA Galfer has Wave Rotors and HH sintered brake pads for a range of V-twins. Get all the details in Louisville.

S&S Cycle will be highlighting its new 50-state legal Grand National 2-into-2 exhaust system for 2018 and newer Harley-Davidson Fat Bob models. This race-inspired system makes great power and sounds even better.

LEPERA

BDL

Come to LePera’s booth to see all of the new seats. You can see the KickFlips, Cherokees and much more. Don’t forget to pick up your free poster and decals.

Stop in with BDL and check out the company’s new lineup of open beltdrives for Milwaukee-Eight-powered Touring bikes.

BASSANI XHAUST Stop by the Bassani booth and check out the company’s newest exhaust products, including these *sweepers for the Harley-Davidson FXDR.

KURYAKYN The Kuryakyn Road Thunder Sound Bar Plus by MTX features twice the power of the original sound bar and a newly integrated 1.0 Amp USB port that offers convenient device charging.

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 86

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

COBRA

Adaptive LED technology from J.W. Speaker lets your customers eliminate dark corners and light up their night riding. Drop by the booth in Louisville to learn more.

Cobra’s *El Diablo 2-into-1 is as mean as they get, designed specifically for solid mount Sportster models.

METZELER

NAMZ

Metzeler’s new Cruisetec tire is a revolutionary new offering for aggressive V-twin riders who are looking for the right balance between performance and personality.

See Jeff Zielinski at NAMZ to get all the details on the new run/brake/turn signal module for upgrading Indian Motorcycle models, and the new discrete Royal Flush LEDs.

DP BRAKES

CUSTOM DYNAMICS

DP Brakes has a new clutch kit and new brake pads for late model Harley-Davidsons. Direct-fit applications, they cover everything from the 2015 Fat Boys to the 2019 Heritage Classics.

Custom Dynamics will be showcasing its new range of products, including the ProBEAM BAGZ and turn signal eliminator kits for Harley-Davidson Touring models.

PRODUCT PREVIEW

J.W. SPEAKER

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES �����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

87

R E P O R T

NVP PREVIEW

E V E N T

88

EBC

LA CHOPPERS

Stop by the EBC booth and check out the company’s brake products for American-made V-twins.

Stop in with LA Choppers and learn more about the new Prime Ape handlebars. These ape-hanger-style bars might have an aggressive style, but they are designed for all-day riding.

BARNETT

J&M CORPORATION

Time for your customer to swap out a broken clutch basket in their 2017-2018 FL model? Barnett’s latest Scorpion billet clutch basket is a bolt-on upgrade over the stock setup.

The new XXRP 700w 4-channel amplifier kit for 2014-2019 Harley-Davidson Ultra or Ultra Limited is a serious audio upgrade for that Bagger’s stock sound system.

Z1R

DAKOTA DIGITAL

Visit the Z1R booth and check out the new women’s .410 leather jacket. It features a satin inner liner, plenty of vents for maximum airflow, and other features such as black reflective piping.

Dakota Digital is highlighting its new MLX-8414 direct plug-in digital instrumentation system for all 2014 and newer Street Glide, Road Glide, Ultra Classic and CVO touring models.

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

■

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

REGULATE WITH THE BEST Whatever the ride, Drag Specialties offers the best and most complete line of voltage regulator options from the best brands.

See your Drag Specialties rep for more information.

Quality V-twin parts since 1968 dragspecialties.com

#since1968

D E A L E R S H I P

P R O F I L E

PROFILE: J&B CYCLEWORKS

P h o t o s b y M e l o n h e a d P h o t o

DEALERSHIP PROFILE

WHERE CUSTOMER SERVICE RULES

90

The team at J&B Cycleworks. From left: Justin MacEwan, technician; Keith Donegan, shop helper/porter; Bruce Kain, owner; Jonathan Baloun, owner; Gracie, shop dog; and Kienan Walton, technician.

J

onathan Baloun and Bruce Kain are a study in opposites. Their starts in motorcycling, their ages, their backgrounds and even their powersports specialties are at odds with each other.

Somehow, though, it’s those differences that make Jon and Bruce the ideal partners.

As a Drag Specialties dealership, their shop, J&B Cycleworks in Conroe, TX, has become a thriving success in their local market just two years after opening its doors. In fact, the two dealers credit the distributor and

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

Drag rep Duke Durham for helping them get the store up and running.

J&B Cycleworks is an independent motorcycle shop that works on all types of motorcycles. Jon and Bruce opened the shop in 2016 to service all brands of motorcycles, with a strong emphasis on giving customers an outstanding experience.

Bruce is a relative latecomer to motorcycling. He didn’t start riding until he was in his late 30s, and his

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

After graduation, Bruce and his wife Nelly moved to Texas, where Bruce found a home working on the Harley-Davidson side at a multi-line dealership group.

Unlike Bruce, Jon grew up in a motorcycling family. “Around 10 or 12 years old, my dad and I got an old XR70 out of a friend’s barn that was just absolutely atrocious. We got it running, but didn’t change a thing. The muffler was falling off. I’ve been riding ever since,” Jon says. He’s owned 22 motorcycles since then, and it was no surprise that after high school he headed to Wyotech in Daytona Beach, FL. Jon graduated at the top of his class.

Jon wound up working for the same dealership group as Bruce, but he was on the metric side of things. Working together at the store, the two started getting to know each other. Before long, they started discussing their ideas for a shop.

“We decided the only way to make anything out of our careers was to own our own business,” Bruce explains. “I had a background in manufacturing, floor work, factory labor, and I wanted to apply that to the motorcycle industry.”

introduction to the lifestyle was less than traditional. “I owned a barbeque restaurant in Elizabeth, NJ, and I got baptized into the motorcycle groups by renting my garage space to an outlaw biker gang,” Bruce says. “I bought a basket case motorcycle from them, put it together – they helped me with it – and I rode it and had a great time.”

Fast forward a decade or two, and Bruce found himself the VP of operations at a textile plant. Worn out, stressed out and ready for a change after 18 years, he quit his job and attended the Motorcycle Mechanics Institute Phoenix, where he graduated as a 4.0 student. In addition, he was named S.O.C. (Student of the Course) nine times.

“Being 50 years old and seeking an entry-level position in the motorsports industry, I knew that I would have to be one better than the next guy looking for that same entry-level technician’s job,” Bruce says.

�����������������������������������������������������������������������������������������������������������������������������

As the plans developed for the two to open a shop together, customer service and attention to detail became a focus, as well as the ability to service all makes and models. “We knew that in order to do something in this industry, we were going to have to be able to service cycle riders, not just motorcycles. With Jon’s background in the metric world and with my background in the Harley world, we just figured it was a great combination,” Bruce says.

So, in March of 2016, J&B Cycleworks opened its doors. Bruce was 56 at the time, and Jon was just 26.

When the shop opened, it was taking up 1,800 square feet in a 6,000-square-foot building. Just 90 days later, the shop expanded to fill another 1,400 square feet. In July of 2018, the space grew again to a total of 4,800 square feet.

Word spread quickly about J&B Cycleworks, and shortly after opening, Jon and Bruce found themselves working seven days a week for at least 10 hours a day. Since then, they have added a full-time technician, a part-time technician and a shop assistant to help out. Their goal is to have five full lifts and another fulltime tech operating by March.

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

91

SUBTITLE SUBTITLE

D E A L E R S H I P

P R O F I L E

Title

of the construction to show off their progress as they planned the inventory.

Subtitle Here Upper LowerhasCase J&B Cycleworks grown a lot in just two years, but

B

ody copy here.

Jon and Bruce want to keep that personal aspect of the operation. “Jon and I are the face of this company,” Bruce says. “So, no matter how we split up the responsibilities, or how many people we have working for us, everyone who comes in the door knows they can walk up to an owner of the company, and the owner of the company is going to give them advice, and the owner of the company is going to work on their bike.”

■

Drag Specialties sales rep Duke Durham (left) is a trusted advisor for co-owners Bruce Kain (center) and Jon Baloun.

And even though they’re working on bikes, J&B Cycleworks is about a lot more than just motorcycles. As Bruce says, “You have to be dedicated to what you’re doing, and you have to believe that the customer is number one.” ■

Both Jon and Bruce attribute their quick success to a combination of hard work and, most importantly, attention to detail and customer service. “We’re willing to go that little extra mile and pay that little extra attention to detail,” Jon says. For example, if a customer is having new wheels installed but the tech realizes the brake pads are worn, oftentimes the customer will be charged for new pads, but not for the labor to install them. Or if a customer is having work done and one of them notices a missing bolt, they’ll go ahead and replace it.

For Bruce, the formula for success is an easy one: “If you go above and beyond what a customer is used to getting, you’ve got a customer forever,” he says.

DEALERSHIP PROFILE

But, as every business owner knows, success doesn’t come without some sacrifices. Making J&B Cycleworks a reality meant that Jon and Bruce had to put their personal lives – and their personal space – on hold for a while.

“We basically opened the place on a shoestring budget,” Bruce says. “Jon and his girlfriend moved into our house because we knew we wouldn’t have salaries and we’d have to save money somewhere. We started the business, we moved in together, and we lived with each other for six months, until we had enough income to take a paycheck and at least get our own places to live.”

Living and working together wasn’t always easy. Bruce notes that “partners have to learn how to work together. We decided we were going to be 50/50 partners, so working through differences in a partnership is probably one of the most difficult things to accomplish.”

Another early hurdle for J&B Cycleworks was knowing which parts and how many of them to stock. With that shoestring budget, Jon and Bruce had to be careful in their selections.

They relied heavily on the advice of their Drag Specialties rep Durham, and they took advantage of special offers from Drag vendors, like product bundles that included free displays.

J&B Cycleworks is a full-service shop that services both V-twin and metric bikes. The number one focus at the Conroe, TX dealership is customer service.

J&B Cycleworks was working with Drag even before the shop’s doors opened to the public; Bruce would send his rep photos

92

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

F X-79 FX

U

E

NO

M

ER WHAT YO

RID

T AT

’V

GO

RE

D

R

WE

E

T YO U C O V

Flip-down inner sun shade

E

DOT and ECE 22.05 certified

3-snap visor compatible

Ear cavity space for speakers

Double D-Ring

New FX-79 from AFX. Vintage-style, open-face helmet constructed using an advanced lightweight thermoplastic poly-alloy. Standard features include a flip-down inner sun shield, a hypoallergenic and antimicrobial combined nylon and perforated leather liner and titanium double D-ring retention system. Available in six colors.

GET IN TOUCH WITH YOUR DRAG SPECIALTIES REP TO LEARN MORE ABOUT HELMETS FROM AFX.

afxhelmets.com

dragspecialties.com

P R O D U C T

S H O W C A S E

CUSTOM WHEELS

Affordably Forged Wheels Fuel, Fury and Rockstar

stock-style Harley-Davidson perimeter-ring rotors. It’s a Coastal Moto exclusive and a design meant to save customers the cost of new rotors to go with the new wheels. The forged Fuel, Fury and Rockstar, in either of the finishes and all the sizes, are priced at just $1,299.95 to $1,799.95 depending on size.

The Fuel wheel in black.

W

hen they’re rolling under a factory Bagger, custom wheels make a custom Harley-Davidson. Little question about that, and in many cases Coastal Moto’s wildly popular cast wheels, the Largo and Atlantic, put this major swap into the affordability range of many.

Having been at it for more than 10 years, Coastal Moto is no stranger to custom forged wheels. What’s new here is the new design of the Fuel, Fury and Rockstar and their 3D hubs that, bolt-for-bolt, accept those stock-style 2014 and later floating perimeter-ring rotors.

Seeing is believing. Coastal Moto’s Fury wheel in black provides a factory Bagger an instant upgrade in style.

Now there’s a lineup of three new forged wheels from Coastal Moto, custom wheels also aimed at those 2000 and newer Harley Touring machines. Like those first round of wheels from the company, these new models are designed to save riders some serious money. Drag Specialties has these budget-minded beauties right now.

The Fuel, Fury and Rockstar are all forged and available either chrome plated or with an exclusive Black Cut finish.

They are offered in four front sizes ranging from 19-inches to 26-inches, in ABS or non-ABS versions and two rears, 16-inches and 18-inches.

If the wheels are being purchased for a 2013 and older bike those new-style rotors will be required, but there’s a price and performance bonus to be had here; those latestyle perimeter rotors are just $199.95 each and they’re full-floating, a braking upgrade all by themselves.

The wheels are delivered ready for mounting with the bearings supplied and installed. The Fuel, Fury and Rockstar wheels are also ready to accept the 2014 and later

Coastal Moto’s forged Fuel, Fury and Rockstar are forged in the USA, machined right in Coastal Moto’s Hendersonville, TN facility. ■

All of Coastal Moto’s custom forged wheels come complete with bearings installed and are ready to be mounted. Here’s the Rockstar wheel in chrome.

THEY’RE AVAILABLE IN THE FOLLOWING SIZES: FRONT (ABS and non-ABS) REAR • 19 x 3 • 16 x 5.5 • 21 x 3.25 • 18 x 5.5 for CVO bikes • 23 x 3.25 • 26 x 3.75, ABS and non-ABS

»»Talk to your Drag rep about Coastal Moto

and these new forged wheels. More info can be found at www.coastalmoto.com.

94

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

FORGED SERIES WHEELS

NEW HUB DESIGN PRECISION MACHINED FROM FORGED 6061-T6 ALUMINUM READY TO MOUNT WITH BEARINGS AND VALVE STEMS INSTALLED ABS / NON-ABS READY _ FIT 08-19 TOURING MODELS _ CHROME OR BLACK-CUT MADE IN THE U.S.A.

dragspecialties.com

P R O D U C T

S H O W C A S E

SUSPENSION PRODUCTS

Softail Suspension

Upgrading the Milwaukee-Eight Models suspensions of the past. All this translated into a Softail-model Harley with a more responsive and more controlled ride, new suspension to go with all that new Milwaukee-Eight power.

The 465 Series R.A.P. Shock allows your Softail customers to dial in their suspension for a custom-fit ride. This version also comes with a mounting bracket for the remote adjustor.

Good as all this is, Progressive Suspension has set out to make it better with the 465 Series Softail Shock and 465 Series R.A.P. (Remote Adjustable Preload) Shock. Both are state-of-the-art performance upgrades designed especially for those new-model Milwaukee-Eight Softails.

A high-pressure gas monotube design, they both feature an oversize 46mm bore with deflective-disc damping and five-position rebound adjustment, something not available OE and allowing the 465s to be dialed-in to rider preference.

The 465’s custom-wound springs, engineered specifically for these Softail applications, are offered in Standard and Heavy-Duty rates, heavyduty recommended when rider, passenger and load routinely exceeds 250 pounds.

With the 465 Series Shocks, Progressive Suspension is focused on improving the ride and handling for the latest generation Harley-Davidson Softails.

By making the most of that Harley-Davidson frame-and-swingarm redesign, and by including five-position rebound adjustment, the 465 Series shocks can further enhance a Milwaukee-Eight Softail’s ride quality and comfort. They will also improve the overall feeling of control and deliver quick, responsive reaction to road irregularities, large and small.

W

hen Harley-Davidson set out to integrate Milwaukee-Eight power into an expanded Softail lineup, the design goals included improved ride and handling to go with that multi-valve horsepower.

Towards that end the bikes got redesigned frames and swingarms, retaining the classic Softail look but now coming in a lighter, stiffer and stronger package. The Softails also got a revised suspension system, a nitrogencharged mono-shock that was a significant step up from

96

DRAG SPECIALTIES MAGAZINE

The shocks are available in a wide variety of lengths, everything from standard length to shorter shocks for those looking to lower the bike, longer lengths for riders wanting more ground clearance. Each one is hand-assembled, custom-tuned and dyno-tested in the Progressive Suspension facility before packaging and shipment. The shocks come with a Lifetime Warranty coupled with great customer service.

★

FEBRUARY 2019

Progressive Suspension’s team of experienced ride-control engineers used state-of-the-art computer modeling to design the 465s, shock dynos and plenty of real-world/on-the-road testing to prove the results.

They’re a perfect complement to that Milwaukee-Eight power and the new frame it’s mounted in. ■

»» Talk with your Drag sales rep for details on the 465 Series

Softail Shock and 465 Series R.A.P., and for more information have a look at www.progressivesuspension.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

VENDOR PROFILE & PARTS

V E N D O R

P R O F I L E

Fat Baggers, Inc. has been at it since 2004, building customized Baggers and Trikes. You’ve likely seen the company’s eye-catching designs in titles such as Hot Bike.

TIME FOR A CHANGE FA S T E Z I N S TA L L B A R S

T

ime has always played an important role for Fat Baggers, Inc. owner Gary Chipp. Back in 2004, he got started in the custom Bagger market at just the right time to be at the forefront of the trend. Now, with the company’s EZ Install handlebars, it’s all about saving time for dealers, with a design that makes installing wiring quick and easy.

Drag Specialties is the distributor for the Fat Baggers, Inc. EZ Install handlebars in both pointed and round tops, as well as complete EZ Install handlebar kits. In all, there are 72 new part numbers that cover applications for the 10inch, 12-inch, 14-inch and 16-inch high bars.

One of the things that makes the handlebars so distinctive also helps make them easier to install. “That top-pointed feature is a non-welded joint, and that non-welded joint is what has allowed us to have a large internal machined wiring cavity in it, which allows us to pull the wires within minutes inside the tubing, even on older model motorcycles,” says Chipp.

On both the pointed and round bars, the internal construction has that non-welded top corner for easy wire pulling. The design was first put into use for Fat Baggers workers. When they started doing on-site installations

98

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

at bike rallies, the staff needed to get the work done as quickly and efficiently as possible since the customers were usually waiting.

“In our first round of product, we were building the handlebar conventionally, just like everybody else, and they didn’t install nearly as easily as what we wanted,” Chipp says. “So that’s what put our brains to work, and we started developing a new process to make that toppointed feature.”

The EZ Install handlebars are sturdy CNC machined, mandrel-bent billet steel with a 1¼-inch diameter and a 0.120-inch wall thickness. Chipp says that making the bars is a labor-intensive process, but well worth it for the end result.

His team can install a set of bars in as little as 30 minutes, and the design means that there is no danger of snagging and damaging a wire while pulling it through the bars. The handlebars are available with a chrome or a gloss black powder coated finish. They are constructed at Fat Baggers’s headquarters in Iowa, carrying on the company’s Made in the USA tradition.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

FAT BAGGERS

The handlebars are available with a chrome or a gloss black powder coated finish. They are constructed at Fat Baggers’s headquarters in Iowa, carrying on the company’s ‘Made in the USA’ tradition.

There are also complete handlebar kits for both the pointed and round top designs. Each kit includes the handlebars, special line/cable extensions, switch wiring, pull ropes and lubrication for the wiring installation.

the existing lines, late-model Harleys with linked braking become much easier to work with since there is no need to bleed the brakes. It also means that independent motorcycle shops can easily install the handlebars.

One of the time-saving features of the handlebars is the cable system for the taller heights. Those taller bars need longer lines than stock, but Fat Baggers sees no reason to replace the entire setup, which just requires more time and work.

“We have a bleeder inside the fairing on the bike and we only have to bleed a short section of line, which we can do in minutes per side,” Chipp explains. “We can put on a set of 14-inch handlebars, start to finish, in under two hours on a late-model motorcycle, which is just unheard of. It saves the consumer money with our kits and our product, which makes it more affordable to get the product installed. It also makes the shops more money because

Instead, the EZ Install kits come with special line and cable extensions that attach to the existing lines. By extending

The EZ Install handlebars from Fat Baggers, Inc., feature a patented two-piece construction that bolts together under the clamp. The unique design means the packaging is half the size of standard bars, saving space and shipping costs.

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

99

FAT BAGGERS

V E N D O R

P R O F I L E

All of the handlebars feature a large internal machined wiring cavity that makes it easier to pull the wiring harness through, making for quicker installations.

they are able to flat-rate these installs and they actually get ahead of the flat rate instead of behind the flat rate.”

The handlebars are made with a patented two-piece construction that bolts together via a solid clamping area that ensures a strong and safe connection. The two-piece design means that the packaging is half the size of standard handlebars, saving dealers a lot of space and freight cost.

These days, Fat Baggers is focused solely on handlebar production, but the company’s origin was in wide tire kits. Chipp grew up in a motorcycling family that has owned dealerships since 1973. Chipp’s father Bob has been a franchise Harley-Davidson dealer since 1984.

Unsurprisingly, Chipp followed in his family’s footsteps, but he leaned more toward parts manufacturing and custom builds. When a customer came along asking for a bolt-on fat tire kit for a Road Glide in 2004, Chipp started calling around to find someone who made them.

He came up empty, so he decided to do it himself. He had never seen a wide tire on a Bagger before, and as he soon found out, neither had anyone else.

“We went after that project, and bought a few pieces of equipment,” Chipp says. “We did this in our Harley dealership, fabricated the whole bike and took it to Daytona Bike Week the following spring.”

100

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

That Bike Week was in the spring of 2005, and Chipp was flagged down by an editor of Hot Bike Magazine to do a photo shoot and feature story. The article was titled “Fat Bagger,” and Chipp figured it was a fitting name for the company.

Chipp’s newly-dubbed business was launched right as the custom Bagger craze was starting. The Fat Baggers wide tire kit took off, and since then the company has been a big player in the aftermarket Bagger scene.

Not long after setting up shop, Chipp bought a semi so he and his team could travel to bike rallies across the U.S., doing on-site installs. It was from those first-hand experiences that Chipp realized the need for handlebars that looked good and installed without hassle.

Now, that has been packaged into a kit so dealers can enjoy the same convenience. Check the FatBook for the full list of applications available through Drag Specialties. ■

»» Talk to your Drag Specialties rep about the pointed and round top EZ Install handlebars and complete kits, and how they can save time on installations. You can also visit https://fatbaggers.com for more details.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

P R O D U C T

S H O W C A S E

GRIPS

Chill Blocker

Heated Grips for Cold-Weather Riding

Avon’s Heated Grips are easy to install, and will keep your customers’ hands warm and toasty on a cold ride.

F

or many of your customers, motorcycling doesn’t end just because the calendar pages have flipped through to the winter months. These are the riders who know how to outfit themselves, and their bikes, for cold-weather riding.

They’re also the customers who will be glad to hear that after two years of extensive research, design and testing, Avon’s Heated Grips are back on the market.

Warm hands can make a huge difference in the enjoyment of a fall or winter ride and the newly-redesigned Avon Heated Grips can deliver exactly that. These Heated Grips are available in Avon’s Air Cushion, Custom Contour and Velvet Air styles. Finishes include anodized or chrome, and the end-cap choices are Boss, Excalibur, Gatlin, Rival, Spike, and Super Sport.

In addition to the Harley-Davidson fitments for everything from Sportsters to Baggers to Trikes, there are also Heated Grips for Indian Scouts and Chieftains.

Installation of the Avon Heated Grips is simple. The newly revised switch replaces the top half of the clutch perch

102

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

(with the exception of 2015 and newer Road Glides) and the actual small controller box for the heated grips can be mounted inside the fairing, under the gas tank, even inside the headlight compartment on a Road King.

There’s a wiring diagram included in every kit. Notably, power for the heated-grips comes off the bike’s accessory wire, thus preventing the heating pads inside the grips from remaining on after the motorcycle is shut down.

As easy as the Avon Heated Grips are to install, they’re easier yet to operate. That newly revised switch replacing the top half of the clutch perch is an old-school rocker switch with High, Low, and Off settings. It couldn’t be any simpler.

In the Low setting the grips quickly become toasty warm, just the thing for an early-morning or late-evening ride.

Flip that switch over to High and those grips get hot, so hot that you’ll want gloves on. Either way, on Low or High, icy-cold hands and fingers become a non-issue. ■

»» Avon’s Heated Grips are available now and Drag Specialties has them.

Talk with your Drag rep for details and check out www.avongrips.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

New Harnesses and Modules

NAMZ/Badlands has new harnesses and modules designed to make it easier to perform electrical upgrades for Indian Scouts and a number of Harley-Davidson models. There’s also a specialized ignition harness for converting early EFI Twin Cam engines to carburetion.

S

olving electrical puzzles has confounded motorcycle riders for generations. However, with help from NAMZ and Badlands, customers with older bikes can keep them on the road longer.

modules allow turn signal lights to flash sequentially, and use a built-in load equalizer so they can function as run/brake/turn lights.

The company’s plug-and-play replacement harnesses, modules and connectors have made life easy for anyone customizing the lighting on later-model bikes.

The static modules will drive three individual LEDs per side.

When either the left or right turn signal buttons are pressed, each LED will illuminate separately and stay illuminated until all three are lit before starting the sequence over again.

Latest on this list are new harnesses and modules for Indian Scouts and a number of Harley-Davidson models. These new products will help make those electrical upgrades a snap. Also on that list is a specialized ignition harness for converting early EFI Twin Cam engines to carburetion.

The dynamic module does something similar, except that each of the three LEDs will flash on/off before starting the sequence over again. With either module the bike’s flasher will self-cancel as it normally does. The modules will drive any LED light, including those NAMZ Royal Flush LEDs.

Innovators when it comes to customizing the Indian Scout, Brian Klock and the Klock Werks crew inquired about a product that would make it easy to upgrade the lighting on that popular model motorcycle. NAMZ and Badlands responded with the new IHL-IND-S customlighting module for that bike.

Finally, there’s the NAMZ and Badlands NSAIH-01 Stand Alone Ignition Harness. With the advent of the MilwaukeeEight, earlier Twin Cams motors are becoming popular for custom installations and many builders are converting them to carburation.

This plug-and-play Tail Light Eliminator allows aftermarket taillights to work in Run/Brake/Turn mode without triggering a trouble code. They’re easily installed and use factory-labeled connectors, and will also work with OEM turn signals. This kit comes complete with a module and rear-fender harness.

For Harley-Davidsons, there are dynamic or static sequential modules and Royal Flush LED lights. These

ELECTRICAL PRODUCTS

Electrics Made Easy

With this new harness from NAMZ and Badlands, there is no need to cut up a factory harness and hope that the bike starts. The Stand Alone Ignition Harness works with all 2004 to 2006 OEM-style or Screaming Eagle ignition modules, the Daytona Twin Tec TC88A or Dyna 2000 TC-3.

It’s also a quick-and-easy solution when converting a Twin Cam motor with a crank-position sensor. ■

»» Talk with your Drag rep for details and check out www.namzcustomcycleproducts.com.

The Royal Flush LEDs from NAMZ are slick and sleek lighting solutions that can be installed in a number of locations on a motorcycle.

�����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

103

P R O D U C T

S H O W C A S E

BRAKE PADS

Full Stop

Drag’s Premium Sintered Brake Pads

Drag Specialties Premium Sintered Metal Brake Pads are made by DP Brakes to provide long-lasting performance, as well as no dust, no noise and no fade reliability.

The Drag Specialties Premium Sintered Metal Brake Pads feature a sintered compound that was designed specifically for Harley-Davidsons. Available in front and rear fitments for virtually all disc brake Harley models, each set of brake pads arrives display-ready in Drag’s attractive Premium packaging.

The premium sintered pads are more durable than stock, lasting up to three times longer than their OEM counterparts. The sintered compound also provides improved stopping power over OEM pads, giving riders better braking confidence.

The pad backing plate is topped with a high-tech ceramic heat shield that keeps heat away from the caliper piston and brake fluid. The cooler operating temperatures mean that the brakes will not fade, even under heavy or frequent braking.

In all, the Drag Specialties Premium Brake Pads result in no brake dust, no noise and no brake fade. Whitewalls and chrome wheels stay clean, and braking is consistent time after time.

The brake pads might be premium, but that doesn’t mean they come with a premium price tag. Drag Specialties offers competitive pricing as well as very attractive margins for the dealer.

A description of brake pads doesn’t usually involve a World History lesson, but an exception has to be made in this case. The military aircraft flown during World War II were still using expanding drum brakes.

As planes got heavier and faster, it became clear that a better, lighter braking system was necessary. British company Dunlop Aviation developed the disc brake by the late 1940s. In 1955, the company introduced its sintered metal disc brake pads to the aviation industry.

The potential applications for sintered pads outside of aviation were obvious, and the British government tasked Dunlop Aviation with developing sintered disc brake technology for motorcycle applications.

D

rag Specialties takes the definition of Premium very seriously. When it comes to Drag’s Premium Sintered Metal Brake Pads by DP Brakes, the word means performance, longevity and reliability. It also means no dust, no noise and no fade.

DP Brakes has been the only exclusive brake pad supplier to Drag Specialties since 1998, fostering a long-term relationship between manufacturer, distributor and dealers that emphasizes excellent customer service.

104

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

DP Brakes was founded as a subsidiary of Dunlop Aviation to do just that, and has continued developing the technology and applications to the present day. The company focuses solely on sintered metal pads, which are OEM for many aftermarket premium brake caliper manufacturers. ■

»» Talk to your Drag Specialties rep about the Premium

Sintered Metal Brake Pads by DP Brakes. Look up applications and more at www.dragspecialties.com.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

PERFORMANCE TUNERS

Power Tuning

Custom Mapping for Indians

With the Power Vision CX, custom tuning an Indian Scout or Thunderstroke 111-powered bike is a snap. A simple flash of the ECU, and those bikes will release previously hidden horsepower and torque.

W

hether a bike has all of its factory hardware in place or if it’s been customized with pipes, intakes and cams, it’s going to benefit from a custom-mapping of the ECU. Optimizing the tune makes for an efficiently running V-twin and a bike that’s more fun to ride.

With the Power Commander V and Power Vision CX, Dynojet has the tuning devices to get the absolute best out of Indian Motorcycle’s Thunderstroke 111 engine and its Scout range.

The Power Commander V is the latest in a long line of Power Commanders and it allows for some pretty serious adjustability for performance. Whether the new tune is coming from an easily accessed and installed pre-written Dynojet program, or it’s a custom map being worked out on a dyno for a specific bike, the Power Commander V can do it. With a modified map a Scout will be snappier and a Chief ready to rip.

The Power Commander V is easy to install and adjust and it allows customized fuel delivery and ignition timing from the warm-up adjustments to full-throttle operation. The Power Commander V is also capable of mapping each cylinder individually and every gear/ speed combination.

Among its other capabilities, the Power Commander V can build adjustment tables based on analog input such as boost or temperature, and there’s a two‑position

Dynojet’s Power Commander V allows for some serious performance and fuel system adjustments for your Indian motorcycle riding customers.

map‑switching function built in, something made even easier to access with an optional Power Commander V Map Selector Switch.

Dynojet’s Power Vision CX is also available for the Indians, meaning the Scouts, Scout Sixties and Thunderstroke 111s are just a flash away from releasing previously hidden horsepower and torque. No extra modules or devices are required with the Power Vision CX. The Power Vision CX interfaces with the OEM ECU through the bike’s diagnostic connector. This allows reading of the original tune (which can always be restored) along with the ability to flash new pre-written Dynojet performance tunes.

Available for popular aftermarket modifications, the tunes optimize fueling and timing for individual applications and available fuels. Fuel delivery and ignition timing are optimized, rev limits and speed limits are raised, torque limiting functions reduced or eliminated and there are revised drive‑by‑wire throttle profiles.

Customers can view all of this relevant data on Power Vision CX’s high‑contrast display. For shops and advanced tuners, Power Vision CX’s suite of included Power Core software provides all the tools to perform custom tuning and further optimize performance. ■

»» Drag Specialties has all of this so talk to your rep. The Power

Commander V and Power Vision CX and their available accessories for the Indians can make already good bikes great ones. For more information visit www.dynojet.com.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES �����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

105

P R O D U C T

S H O W C A S E

Slippery Business Upgraded Oiling Systems

Feuling has good, better and best options when it come to upgrading the lubrication systems on Harley-Davidson Twin Cam and MilwaukeeEight motorcycles.

G

ood, better, best. That’s a quick rundown of the OE+, HP+ and Race Series Oiling System Kits from Feuling Parts and there’s not a wrong choice in the bunch.

Oil is the lifeblood of a Harley-Davidson and upgrading the lubrication system is maybe one of the most important steps your customers can take to ensure a long, strong life for their bikes. It’s a really important step for MilwaukeeEight bikes given that motor’s particular needs.

The most affordable move is those OE+ packages. Coming with an OE+ billet oil pump and matched OE+ billet camplate they’re available for all the Twin Cams and a definite upgrade from stock.

The kits deliver significantly increased oil pressure and scavenge volumes. An OE+ upgrade is a big step in the right direction, and if that TC is a pre-2007 model, including a Feuling Hydraulic Cam-Chain Tensioner Conversion to replace those spring-loaded tensioners with late-style hydraulics is a no-brainer.

Stepping up a few bucks gets the HP+ and Race Series Kits, available for both the Twin Cams and the Milwaukee-Eights. The HP+ kits come with a precisionmachined 6061 billet aluminum high-volume oil pump, the Race Series uses a billet 7075 hard-anodized pump.

Both kits include Feuling’s High Flow billet camplate made from 7075 aluminum which is 50 percent harder and stronger than the factory camplates. With its enlarged reservoirs and passages it increases oil flow and volume to the lifters, piston cooling jets, crankshaft and rod bearings. Both kits come with new lifters (the Race Series lifters featuring a full .200-inch travel with a slow bleed-down) along with all the gaskets, seals and hardware for a full installation.

Any rider contemplating a winter-time upgrade session shouldn’t overlook any of this. Milwaukee-Eight riders, especially, would be well served with a Feuling Oiling System Kit. ■

»» Talk with your Drag Specialties sales rep and get more information, including technical details at www.feulingparts.com.

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • •

Quality Where it Counts It’s a labor-intensive job and for that reason choosing a belt that’s as good or tougher than OE is of paramount importance. That’s where Belt Drives Ltd. comes in.

BDL has quality replacement rear drive belts, all the lengths, widths and tooth counts to fit virtually every American V-twin on the road.

W

hen Harley-Davidson made the switch to a belt final drive, that 1981 FXB Sturgis model had eyebrows raised. Was a belt really better than a chain? Was it strong enough, would it last? The answers have been pretty conclusive. Not only are those belts strong enough, they’re also cleaner, quieter, more efficient and they last – just not forever.

As good as a belt final-drive is it’ll eventually need replacement, and fitting that new belt isn’t exactly a walk in the park.

BDL has all the quality replacements, all the lengths, widths and tooth counts to fit virtually every American Vtwin on the road. There are rear-drive belts from 125 teeth up to 140 teeth including the 133- and 134-tooth belts for the latest-model Harley-Davidsons, widths covering all applications.

They’re all premium High-Torque Polyurethane Synchronous Belts, all featuring tough carbon/carbon-fiber cording and available with the distinctive top ribbing like OEM or with a smooth top for a clean look.

Remember that when changing a rear-drive belt, the reardrive pulley needs to be closely inspected. If there’s any sign of wear, common when there are 30,000 to 40,000 miles on the bike, replacement is warranted to prevent premature belt failure, notes BDL. ■

»» Talk with your Drag rep for details, and get more information at www.beltdrives.com.

DRIVE BELTS

Belted Up

SEATS

P R O D U C T

S H O W C A S E

Going Solo in Style

Colorful Retro Cues Meet Comfort

L

ePera Motorcycle Seats knows that for a lot of riders, a motorcycle seat is about more than just a comfortable place to sit. It should also enhance the look of the motorcycle or, in the case of the Outcast GT, transform the look of a Touring bike completely by adding a hot rod pop of color and style.

The Outcast GT is the cooler sibling of the Outcast thanks to a stripe of color right down the middle of the seat and The Outcast GT with backrest

up onto the backrest. The full-length solo seat comes in black with either a red pleated or a white diamond insert.

Coordinating speed stripes add more color detail on the sides of the seat.

The seat itself has a deep 15-inch wide rider area, and the contours of the Outcast GT offer good rider support while allowing unrestricted movement. The molded one-piece foam foundation sits on a 16-gauge powder-coated steel base plate for a comfortable and durable seat. Underneath, the seat bottom is carpeted to protect the fender.

The 10½-inch x 7-inch backrest offers extra support and a touch of styling. It is both removable and adjustable, moving up and down as well as forward and back.

Like all of its seats, LePera’s Outcast family – including the black Outcast, Outcast GT and the Outcast Daddy Long Legs with two extra inches of leg room – are all made in the USA. ■

»» Talk to your Drag Specialties rep about the Outcast GT and other LePera seats. Learn more about the family-owned business at http://lepera.com.

BATTERY CHARGE

Quick Charge

For When it’s Time to Ride

Y

our customer has arrived at an event. His motorcycle is offloaded from the trailer.

Now it’s time for a final check to see that the bike will be ready to ride, but there’s a problem – the battery is dead!

Any number of things could have drained that battery during the trip – the alarm tripped en route or the key left in accessory position – but the results are the same. No battery. No starting. No riding. The race is on to charge the battery before the ride starts.

power on tap, it’s guaranteed to have that battery up and ready to start a bike in a few short hours.

A handlebar hanging hook places the Drag Specialties OptiMate 5 at an easy viewing level off the floor, with the charge status lights in full view.

The Charge/Wait light stays lit while it brings the battery to 60 percent, enough to fire up the engine. That moment of truth is confirmed by the Go Ride!/Optimize light. The ride is on!

If the battery remains connected the charge program continues until the 24-7 Maintain lights comes on. This is perfect for storage charging, from overnight to months, keeping that battery at 100 percent, safely and without ever overcharging. ■

With the new Drag Specialties/OptiMate 5 Power Charger, your customers can have their dead batteries up and running in no time.

This is a common scenario, and OptiMate is here with a solution. Introducing the Drag Specialties/OptiMate 5 Power Charger (p/n 3807-0467.) With 4 Amps charging

»» Ask your Drag Specialties sales representative for details and check out www.tecmate.com for more information.

The ‘must have’ charger for motorcycle technicians FIX ‘DEAD’ BATTERIES

CHARGE FAST!

STABLE 13.6V 8A SUPPLY U

EC

from as low as 0.5V!

any size battery

Model TM251

Part no.

3807-0395 LET’s RIDE. MAKE IT HAPPEN!

select

BRAKES & CLUTCHES

P R O D U C T

S H O W C A S E

Expanding the Lineup

Upgrades for the Newest Harleys

D

P Brakes’ newest sintered brake pads, the DP 551 for the front and DP 583 for the rear, are now available for Harley-Davidsons FL, FX and CVO/SE models, up to the 2019 bikes.

Direct-fit applications, they cover everything from the 2015 Fat Boys to the 2019 Heritage Classics.

DP has added complete Frictions and Steels Clutch Kits for Harley-Davidsons, with one part number covering everything. There are applications across the board.

The benefits of switching from stock to DP are well known. Not only do those sintered DP pads last up to three times longer than the factory pads, they also offer stronger, more controlled braking, they’re quieter and they’re cleaner.

The same is true with those new DP Frictions and Steels Clutch Kits. Designed to provide extended service life along with smooth, slip-free power delivery, all the components are included and everything is ready to go.

The friction plates don’t require a pre-soak, and the precision-machined steel drive plates won’t swell or fade,

DP Brakes has expanded brake pad fitments for a number of new model Harley-Davidsons, and is introducing a new Frictions and Steels Clutch Kit that features everything needed under one part number.

their increased weight even adding a bit of flywheel effect for improved take off. ■

»» DP’s new application brake pads and complete Frictions and Steels

Clutch Kits are available now so talk with your Drag rep. There’s more information and a full application list at www.dp-brakes.com.

Mid-Rise Bars with Style

T

here have been a number of Ken’s Factory parts in the pages of the FatBook for a while now, but one category that was missing was handlebars. Ken’s Factory showed off samples of its new mid-rise bars for baggers during a recent NVP show, where dealers kept asking, “When?” The answer is, of course, now.

The new mid-rise bars feature Ken’s Factory’s signature styling, and provide comfortable positioning for a rider’s hands.

There are cable and throttleby-wire versions available in chrome or black.

As with every Ken’s Factory part, the motto of “Details Create Style” had a big influence on the design of the mid-rise bars. The gracefully curved bars have comfortable positioning for a rider’s hands, but a closer look shows that there is more to the design.

The bars have fluted cuts that follow the lines of the bars to create an elegant but subtle bit of detailing. Stamped Ken’s Factory logos sit on either side of the clamping area.

the chrome cable (p/n 0601-4438), black cable (p/n 06014439), chrome TBW (p/n 0601-4440) or black TBW (p/n 0601-4441) handlebars.

The mid-rise bars are designed for a 1-inch clamp, and finish options include chrome or black. On the black bars, the Ken’s Factory logo is stamped in chrome for a small pop of contrast.

Ken’s Factory parts are designed to mix and match, so check the catalog for complementary options like grips and mirrors. ■

Both cable and throttle-by-wire (TBW) versions of the mid-rise bars are available. In all, dealers can choose from

HANDLEBARS

Curves Ahead

»» Talk to your Drag Specialties rep about the new Ken’s

Factory mid-rise bars and other detailed bagger parts. You can also learn more at https://kensfactoryusa.com.

These are the world-class motorcycle components that help even the most-creative achieve their grander visions. Ken’s Factory releases elegant DETAILS that few brands can achieve so ardent enthusiasts with next-level inclinations truly CREATE a machine notably elevated beyond the common STYLE.

KensFactoryUSA.com

PA R T S

D E PA R T M E N T

DRAG SPECIALTIES SEATS PREDATOR III SEATS Features a 6˝ tall driver support with unique styling Automotive-grade vinyl cover Molded polyurethane foam interior for maximum comfort and styling Seat is made narrow up front for better leg clearance 3/16˝ ABS thermoformed seat base for a perfect fit Rubber bumpers and fully carpeted bottom to protect paint Fits with all Drag and most H-D sissy bars Made in the U.S.A.

»» »» »» »» »» »» »» »»

PART # DESCRIPTION SUG. RETAIL FOR 18-19 FXFB (28 ¼˝ L OVERALL x 11 ¾˝ W FRONT X 6˝ W REAR) 0802-1071 Smooth $308.95 0802-1072 Double diamond, black thread 346.95 0802-1073 Double diamond, silver thread 362.95 0802-1074 Double diamond, red thread 362.95

DRAG SPECIALTIES REPLACEMENT CYLINDERS OEM black texture powder-coat with highlighted fins Excellent for stock replacement Sold in pairs

»» »» »»

PART # 0931-0823

DESCRIPTION SUG. RETAIL For 17-19 M-Eight motors (4.25˝ bore, 124˝ or 128˝ application) $449.95

SADDLEBAG GUARD RAILS Designed to protect side and rear of saddlebags Rails are 3/4˝ diameter, mount directly to stock OEM saddlebag guards Mounting hardware included Not for use with fender-to-saddlebag filler panels

»» »» »» »»

PART # DESCRIPTION FOR 14-19 FLHT/FLHR 3501-1245 Chrome 3501-1246 Gloss black

SUG. RETAIL $279.95 279.95

S&S *GRAND NATIONAL 2-INTO-2 EXHAUST SYSTEMS Free-flow design equals solid horsepower gains Hidden crossover provides performance benefits of a 2-into-1 system Full heat shields on both front and rear header pipes Stainless steel header construction Race inspired Grand National end caps Available in chrome or black ceramic finish

»» »» »» »» »» »»

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 112

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

»» Oxygen sensor ports allow use of wide band or stock O2 sensors »» Removable dB reducers included »» Made in the U.S.A. PART # FOR 18-19 FXFB 1800-2366 1800-2367

DESCRIPTION SUG. RETAIL (NO CATALYTIC CONVERTERS) Black ceramic $969.95 Chrome 969.95

KHROME WERKS *2-INTO-1 EXHAUST SYSTEMS WITH THREE-STEP HEADERS Designed to increase horsepower and torque while providing an aggressive, low-frequency sound level 1.75˝ to 1.875˝ to 2˝ high-flow 16-gauge stepped primary headers with a 2.5˝ collector 4.5˝ diameter, 16-gauge HP-Plus muffler with 2.5˝ inlet Removable 1.5˝ absorptive baffle with 3˝ reverse cone outlet to maximize torque; baffle is wrapped in stainless steel wool and high-temp fiberglass for a rich mellow tone 2.50˝, 220°, 16-gauge heat shields 18mm and 12mm O2 bungs welded into the primaries Includes OEM-style muffler clamp and mounting hardware Eclipse features a proprietary, high-temperature black chrome electroplated finish Made in the U.S.A.

»» »» »» »» »» »» »» »» »»

PART # DESCRIPTION SUG. RETAIL FOR 17-19 FLHT/FLHR/FLHX/FLTRX/FLTRU 1800-2336 Chrome w/ billet tip $1,049.95 1800-2337 Black w/ billet tip 1,289.95 1800-2338 Eclipse w/ billet tip 1,179.95

COASTAL MOTO PRECISION-CAST 3D HURRICANE WHEEL AND TIRE COMBINATIONS First-ever “cast” one-piece design wheels at a fraction of the cost of billet or forged wheels Include bearings and valve stems installed by Coastal Moto Front wheels accept lug-mounted OEM or aftermarket 14-19 FL Touring style front rotors and include a mounted Metzeler ME888 120/70-21 tire Rear wheels accept stock cush-drive, pulley and brake rotor and include a mounted Metzeler ME888 180/55-18 tire Available for ABS and non-ABS models Each ABS wheel is available with intelligent ABS bearings that are “linked brake ready”; no ABS system reprogramming required Wheel and tire combinations do require balancing

»» »» »» »» »» »» »»

DESCRIPTION HURRICANE CHROME HURRICANE BLACK SUG. RETAIL FRONT WHEELS 21˝ x 3.5˝ FOR 08-19 FLHT/FLHR/FLHX/FLTRX, w/o ABS 0335-0010 0335-0012 $1,149.95 21” x 3.5” FOR 08-19 FLHT/FLHR/FLHX/FLTRX, w/ ABS 0335-0009 0335-0011 1,149.95 REAR WHEELS 18” x 5.5” for 09-19 FLHT/FLHR/FLHX/FLTRX w/o ABS 0336-0010 0336-0012 1,199.95 18” x 5.5” for 09-19 FLHT/FLHR/FLHX/FLTRX w/ ABS 0336-0009 0336-0011 1,199.95

*DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES �����������������������������������������������������������������������������������������������������������������������������

FEBRUARY 2019

★

DRAG SPECIALTIES MAGAZINE

113

PA R T S

D E PA R T M E N T

SADDLEMEN EXPLORER LS SEATS FOR XL Deep, wide contoured buckets cradle both rider and passenger Combine progressive density foam and SaddleGel™ for a smooth, comfortable ride Lattice stitch (LS) retro styling infuses the old-school spirit with a modern twist Split-cushion design separates seating surface from lumbar support, reducing tailbone and hipbone pressure SaddleGel in front and rear increases comfort for both driver and passenger, easing tailbone pressure and improving circulation Made in the U.S.A.

»» »» »» »» »» »»

PART # DESCRIPTION SUG. RETAIL FOR 04-19 XL 0804-0724 For 3.3 gallon tank $602.00 0804-0723 For 4.5 gallon tank 602.00

ALLOY ART FRONT MOTOR MOUNT PLATES Lighter and stronger than stock CNC-machined aluminum construction Available in machined or black anodized finishes Hardware included Made in the U.S.A.

»» »» »» »» »»

PART # DESCRIPTION SUG. RETAIL FOR 80-08 FLH/FLHT/FLHR/FLHX/FLTR, AND 82-00 FXR; REPL OEM #S 47159-79A, 47159-07BHP 0933-0137 Machined finsh $169.95 0933-0138 Black anodized finish 179.95

J.W. SPEAKER 7˝ LED ADAPTIVE 2 HEADLIGHTS The Adaptive 2 series headlights allow for the adaptive technology when using high beam, as well as low beam Senses leaning angles up to 30° and dynamically fills in dark areas while turning Direct replacement for most 7˝ headlights, retrofits PAR56 headlights Superior visibility, safety and durability Easy plug-n-play H4-style connector Die-cast aluminum housing 1600 lumen output (high beam), 1020 lumen output (low beam) Available with mounting ring for 99-13 Dresser models only DOT compliant Made in the U.S.A.

»» »» »» »» »» »» »» »» »» »»

PART # DESCRIPTION 2001-1775 Black 2001-1776 Chrome

114

SUG. RETAIL $721.95 721.95

DRAG SPECIALTIES MAGAZINE

★

FEBRUARY 2019

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

SHAKE, RUMBLE, & RIDE

NEW! THE SHAKER™

®©

STREET METAL™ INTAKE SYSTEMS† We guarantee to the original retail purchaser that every K&N Intake

System will provide a measurable increase in horsepower when installed • Cast-aluminum high-volume intake on the vehicle for which it was designed. See more details at knfilters.com. with exaggerated sanded fins • Oversized K&N® High-Flow Air Filter™ for excellent filtration and long service intervals • Built-in dyno-tuned velocity stack • Mounts with integrated breather system

2001-16 H-D TOURING MODELS / 2001-18 H-D DYNA/SOFTAIL MODELS

available through:

†

SUPERIOR AIRFLOW. SUPERIOR PERFORMANCE.

KNFILTERS.COM | 800-858-3333

The 2019

FatBook Cover Bike TM

2018 Fat Bob® Customized by Trask Performance®

Arlen Ness: Procross Rims & Front Brake Rotor, Hub Kits, Jagged Rear Brake Rotor, Oval Micro Mirrors Barnett: Scorpion Clear Derby Cover Custom Dynamics: ProBeam LED Headlight, LED License Plate Frame Drag Specialties: Predator III Seat (customized), Pop-up Gas Cap, Brake line & fittings, License Plate Side Mount, Bottom Mount Headlight Assembly & Mounting Block

Legend Suspension: AXEO Front Fork Suspension, Air-A Rear Suspension

Thrashin Supply: P-54 Slim Foot Pegs, TSC Shift Peg

Pirelli: Night Dragon Front & Rear Tires

Trask Performance: V-Line Moto Handlebars & Grips, Assault Risers, Billet Clutch Basket, Assault Charge Air Cleaner*, Assault 2-1 Stainless Exhaust*

S&S: Quickee Pushrod & Cover Kit, 550C Cam Kit, Sidewinder Spring Kit, Lifter Guides Speed Merchant: Brushed Skid Plate

Joker Machine: Master Cylinder Covers, Stalker Shift Linkage Rod, Rat Eye Turn Signals Ken’s Factory: Vanquish Rocker Box and Cam Covers Check out more details on this bike at various rallies and events throughout the year; or log onto dragspecialties.com/bike-builds to view the complete parts list.

Quality V-Twin parts since 1968

D R A G S P E C I A LT I E S . C O M

*Disclaimer: NOT FOR LEGAL SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES