EC&M - March 2024

MARCH 2024 ecmweb.com

THE MAGAZINE OF ELECTRICAL DESIGN, CONSTRUCTION AND MAINTENANCE

EC&M Magazine Workforce Management • National Electrical Code • Power Quality

Combating Construction’s Biggest Time-Wasters Learn how to define, measure, and improve productivity.

Read more on pg. 24

IN THIS ISSUE

Understanding the Impact of Harmonics pg. 12 Is Troubleshooting Considered Energized Work? pg. 16 How Prefab Boosts Labor Productivity pg. 30

March 2024 • Vol. 123, No. 3

Challenges with EV Charging and Fleet Electrification pg. 46 Code Basics: NEC Requirements for Standby Power Systems pg. 56 2403ECM_C1_Cover_Final.indd 1

3/12/2024 10:46:25 AM

CELEBRATING A CENTURY OF

UNISTRUT The year is 1924, the first round-the-world telegram is sent, and Charles Attwood forms the company that would become the leader in metal framing, Unistrut.

From our early days as the first adjustable frame system in electrical power stations, to becoming an integral component in global construction projects, Unistrut continues to evolve through innovation.

Charles Attwood, Founder of Unistrut

Building Better Together Since 1924 2403ECM_Atkore.indd 2403ECM_C2-3_TOC.indd1 2

2/22/24 4:30 3/12/2024 10:48:31 AMPM

2403EC

T

Branch-Circuit Meter Strip With Integrated Current Sensors The DIRIS Digiware BCM is a branch-circuit meter strip with 21 integrated sensors and allows individual circuit monitoring within any electrical panelboard (Remote Power Panel, lighting panel, power panel, etc.).

The DIRIS Digiware BCM is equipped with three RJ12 channels which can connect to TE/TR/TF current sensors to monitor the main feed or an extra circuit.

.5% Global Accuracy

3X faster to install

Robust & Reliable

Minimal footprint

Easy to Configure

ADVANTAGES

Monitors 21 circuits plus a main feed.

No additional CT leads required.

Power metering and earth leakage monitoring.

Robust plastic cover safeguards components.

od,

rut

4 4:30 PM

Discover our DIRIS Digiware BCM brochure to build your own system today!

2403ECM_Socomec.indd 11 2403ECM_C2-3_TOC.indd

2/29/24 11:52 3/12/2024 10:48:32 AMAM

CONTENTS COVER STORY

24 Combating

March 2024 • Volume 123 • Number 3

Construction’s Biggest Time-Wasters

Learn how to define, measure, and improve productivity.

OTHER FEATURES 24

30 How Prefab

Solutions Boost Labor Productivity

16

A look at the use cases and best practices

30 DEPARTMENTS

34 Construction Labor

Productivity: The $20 Billion Opportunity FMI’s 2023 labor productivity study offers an inside look at why contractors who establish sound operating processes perform better than their peers.

42 Restructuring Construction It’s beyond a labor issue.

46 The Electric Tortoise and the Fleet Hare

As rental cars, trucks, buses, and other fleets increasingly go electric, charging infrastructure has emerged as a major roadblock. Solar, BESS, and load management offer relief.

NATIONAL ELECTRICAL CODE NEC requirements for standby power systems

60 Illustrated Catastrophes

Industry Viewpoint Market Watch

The largest construction projects of 2024

Understanding the impact of harmonics

16 Electrical Testing Education

Is troubleshooting considered energized work?

52 Product News 63 Ad Index

56 Code Basics Test your Code IQ

6 8

12 Inside PQ

Industry Productivity

59 Code Quiz of the Month

00

42

More Code catastrophes

64 What’s Wrong Here?

Can you spot the Code violations?

2

60

Cover Photo: kali9/E+/Getty Images Plus

59

March 2024 • www.ecmweb.com

2403ECM_C2-3_TOC.indd 2

3/12/2024 10:48:38 AM

2201EC

The BNT Nonmetallic Cable Support For Power Manholes And Vaults Underground Devices BNT Nonmetallic Cable Supports:

High Load Capacity Arms Can be Used With Nonmetallic or Steel Stanchions Will Not Rust or Corrode Insulators Not Required Excellent Dielectric Properties Multiple Stanchion Lengths Available Arms Available in Multiple Lengths With Integrated Saddles or a Flat Surface Molded from UL Listed Glass Reinforced Polymer

BNT Saddle Arms Installed in a Nonmetallic Stanchion

2201ECM_UndergroundDevices.indd 1 2403ECM_C2-3_TOC.indd 3

1/3/22 3:19 PM 3/12/2024 10:48:39 AM

ECMWEB.COM

March 2024, Vol. 123/No. 3

www.ecmweb.com

With its exclusive online content, ecmweb.com is a valuable source of industry insight for electrical professionals. Here’s a sample of what you can find on our site right now: Editorial Group Editorial Director - Buildings & Construction: Michael Eby, meby@endeavorb2b.com Editor-in-Chief: Ellen Parson, eparson@endeavorb2b.com Managing Editor: Ellie Coggins, ecoggins@endeavorb2b.com Editor: Michael Morris, mmorris@endeavorb2b.com Art Director: David Eckhart, deckhart@endeavorb2b.com Photo 218462588 © Maksym Velishchuk | Dreamstime.comstime.com

CODE CONVERSATIONS PODCAST — SECURING A STRING OF LIGHTS THE RIGHT WAY

Podcast Ellen and Russ talk about general requirements for wiring methods as outlined in Art. 300. ecmweb.com/21282044

Consultants and Contributors NEC Consultant: Mike Holt, mike@mikeholt.com NEC Consultant: Russ LeBlanc, russ@russleblanc.net Sales and Marketing Vice President: Mike Hellmann, mhellmann@endeavorb2b.com Regional/Territory Account Manager: David Sevin, dsevin@endeavorb2b.com Regional/Territory Account Manager: Jay Thompson, jthompson@endeavorb2b.com Media Account Executive – Classifieds/Inside Sales: Steve Suarez, ssuarez@endeavorb2b.com Production and Circulation Production Manager: Brenda Wiley, bwiley@endeavorb2b.com Ad Services Manager: Deanna O’Byrne, dobyrne@endeavorb2b.com User Marketing Manager: James Marinaccio, jmarinaccio@endeavorb2b.com Classified Ad Coordinator: Terry Gann, tgann@endeavorb2b.com

ID 6169255 © Brian Walters | Dreamstime.comman | Dreamstime.com

RECENT STUDIES DISSECT CONSTRUCTION LABOR CHALLENGES

Construction Tom Zind examines how supply, quality, and price combine to pressure contractors on productivity measures. ecmweb.com/21282887

Endeavor Business Media, LLC CEO: Chris Ferrell

President: June Griffin

COO: Patrick Rains

CRO: Paul Andrews

Chief Digital Officer: Jacquie Niemiec

Chief Administrative and Legal Officer: Tracy Kane EVP, Group Publisher – Buildings/Lighting/Digital Infrastructure: Lester Craft Electrical Construction & Maintenance (USPS Permit 499-790 , ISSN 1082-295X print, ISSN 2771-6384 online) is published monthly by Endeavor Business Media, LLC. 201 N. Main St 5th Floor, Fort Atkinson, WI 53538. Periodicals postage paid at Fort Atkinson, WI, and additional mailing offices. POSTMASTER: Send address changes to Electrical Construction & Maintenance, PO Box 3257, Northbrook, IL 60065-3257. SUBSCRIPTIONS: Publisher reserves the right to reject non-qualified subscriptions. Subscription prices: U.S. ($68.75 year); Canada/Mexico ($ 112.50); All other countries ($162.50). All subscriptions are payable in U.S. funds. Send subscription inquiries to Electrical Construction & Maintenance, PO Box 3257, Northbrook, IL 60065-3257. Customer service can be reached toll-free at 877-382-9187 or at electricalconstmaint@omeda.com for magazine subscription assistance or questions.

Printed in the USA. Copyright 2024 Endeavor Business Media, LLC. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopies, recordings, or any information storage or retrieval system without permission from the publisher. Endeavor Business Media, LLC does not assume and hereby disclaims any liability to any person or company for any loss or damage caused by errors or omissions in the material herein, regardless of whether such errors result from negligence, accident, or any other cause whatsoever. The views and opinions in the articles herein are not to be taken as official expressions of the publishers, unless so stated. The publishers do not warrant either expressly or by implication, the factual accuracy of the articles herein, nor do they so warrant any views or opinions by the authors of said articles.

APPRENTICE’S GUIDE TO ENTERING THE ELECTRICAL INDUSTRY

E-Book From the e-books library: Trainer Harold De Loach’s best advice, tips, and tricks for anyone new to the trade. ecmweb.com/21283455

Reprints: Contact reprints@endeavorb2b.com to purchase custom reprints or e-prints of articles appearing in this publication.

Photocopies: Authorization to photocopy articles for internal corporate, personal, or instructional use may be obtained from the Copyright Clearance Center (CCC) at (978) 750-8400. Obtain further information at www.copyright.com.

Archives and Microform: This magazine is available for research and retrieval of selected archived articles from leading electronic databases and online search services, including Factiva, LexisNexis, and ProQuest.

Privacy Policy: Your privacy is a priority to us. For a detailed policy statement about privacy and information dissemination practices related to Endeavor Business Media products, please visit our website at www.endeavorbusinessmedia.com.

Please Note: The designations “National Electrical Code,” “NE Code,” and “NEC” refer to the National Electrical Code®, which is a registered trademark of the National Fire Protection Association.

E A

4

P

Corporate Office: Endeavor Business Media, LLC, 30 Burton Hills Blvd., Ste 185, Nashville, TN 37215 USA, www.endeavorbusinessmedia.com

4

March 2024 • www.ecmweb.com

2403ECM_4-5_Masthead.indd 4

3/12/2024 10:51:39 AM

2302EC

MADE D IN USA FOR SA SAFER AFER ER BETTER B ER FA FASTER ER JOBS

We’re Proud to be the Electricians’ Friend for Over 50 Years!

on on ! e v a S allati Inst

Qwik Duct

Safer Better Faster IP3b Patent Pending

HDPE CUSTOM TEMPLATES In Any Configuration Required

PVC Offset

IP1 C

Sizes 1/2” thru 6” Meets Flexible Mandrel Test Requirements

US

Bore Spacers

Patent Pending

IP2

Sizes 1/2” thru 6” Roll assembled conduit into caissons and under obstructions C

US

Assemble Conduit Above Trench-

No Workers Below Prevents Injuries and Deaths.

Also Allows Digging a Narrower Trench for Less: Excavation, Concrete, Slurry, Backfill & Shoring.

IP13A-F

Conduit Transition Couplings C

US

PVC Schedule 40 & 80 Transitions in Less Than

PATENT PENDING

5 Minutes

PATENT PENDING

NEW NEW

PVC/PVC

IP15

NEW NEW

PVC/Flex

PVC/Alum

PVC/EMT PVC/Rigid

PVC/Stainless C/St i l PVC/Liquidtite

End Bell C US PATENT Save Cost on the Rigid Nipple, Tape & Labor Adapter PENDING Schedule 40/80 PVC

Use for Entire Job - Not Just for Repair

IP15

1 Piece Reaming Bit 1/2” thru 6” Schedule 40/80

Plus More Being Invented for SAFER BETTER FASTER Jobs . . . Call With Your Ideas!

SPProducts.com 2302ECM_SPProducts.indd 51 2403ECM_4-5_Masthead.indd

800-233-8595 info@SPProducts.com 1/4/23 9:48 AM 3/12/2024 10:51:40 AM

INDUSTRY VIEWPOINT

New Solutions to Old Problems

By Ellen Parson, Editor-in-Chief

D

epending on which source you’re looking at, the country’s skilled labor shortage numbers change slightly — but they’re always staggering, at least in my mind.

To offset the ongoing workforce shortage, the construction industry will need to recruit an “estimated 501,000 additional workers on top of the normal pace of hiring in 2024 to meet the demand for labor,” according to a proprietary model developed by Associated Builders and Contractors. In 2025, the organization predicts the industry will need to attract nearly 454,000 new workers to meet demand. Not surprisingly, employment of electricians, a critical component in this shortfall, is projected to grow 6% from 2022 to 2023 — faster than the average for all occupations, according to the Bureau of Labor Statistics. So any way you slice it, what we have is a huge gap — a gap that’s often hard to envision a viable solution for. But if there’s one thing I’ve learned over more than 20 years of covering the electrical construction & maintenance industry, it is that electrical professionals are passionate, creative, and persistent people. As the vacancies get larger and the stakes get higher, industry veterans continue to seek out new solutions to old problems.

Harold De Loach, a master electrician, electrical trainer/instructor, and founder/ director of The Academy of Industrial Arts in Philadelphia, is one of those people.

Contributing training articles to EC&M print, online, and our E-Train e-newsletter for the last several years, Harold is on a mission to invigorate the electrical profession, employing creative ways to recruit, train, and retain the next generation of electricians. His content, geared toward electrical apprentices, has been so popular with our audience that we decided to release a series of e-books featuring Harold’s most engaging articles. The first installment — offering tips and best practices for anyone interested in entering the electrical industry — is now available for a free download at ecmweb.com/21283455. Look for more “apprentice’s guide to…” e-books coming this year on electrical calculations, conduit and cable basics, installation and wiring, and interesting niche applications.

Another electrical industry visionary is Mike Greenawalt, Rosendin Electric’s CEO Emeritus. I recently had the privilege of sitting down with Mike on my “EC&M On Air” podcast to discuss the new ground-breaking partnership he’s established between Rosendin and Arizona state educators to create a pre-apprenticeship program for Grand Canyon University (GCU). This is a fascinating discussion in which Mike, who tells his personal story of going from a C student to apprenticeship to running a $3-billion electrical contracting company, joins Edward Cota with Arizona’s Department of Education and chief strategy officer/chairman of the Arizona Education Economic Commission to explain how this innovative partnership took shape, what model the program follows, and why this seemingly unconventional approach is seeing such great success. Catch Part 1 of the podcast at ecmweb.com/21283517, and look for Part 2 next month. This training program is a perfect example of how thinking outside the box leads to innovative solutions that are changing the narrative of how students (and their parents) view the skilled trades. As they emphasize in the podcast, “the hand that rocks the cradle rules the world.” Listen to the full episode for all of the details.

Due to the ongoing challenges surrounding doing more with less in the construction industry, this issue is dedicated to the theme of “workforce management.” Check out the cover story on page 24 by Dr. Heather Moore and Dr. Perry Daneshgari of MCA, Inc. on “Combating Construction’s Biggest Time-Wasters” in which they explain how to define, measure, and improve productivity on electrical job sites. On page 30, Wesco International’s Sean Nacey lays out how prefab solutions boost labor productivity through best practices. Offering insight into construction labor productivity trends, FMI’s latest study, summarized on page 34, offers an inside look at why contractors who establish sound operating processes perform better than their peers. And finally, Kenny Ingram of IFS breaks down why restructuring the construction industry’s productivity problem is beyond a labor issue in his piece on page 42.

All of these articles demonstrate fresh perspectives on solving the industry’s productivity puzzle, ultimately making electrical professionals more efficient and profitable.

6

March 2024 • www.ecmweb.com

2403ECM_6-7_Viewpoint.indd 6

3/12/2024 10:58:56 AM

2401EC

Progressive Casualty Ins. Co. Coverage provided and serviced by affiliated and third-party insurers.

As a small business owner, you can’t escape your to-do list.

That’s why Progressive makes it easy to save with a commercial auto quote, so you can take on all your other to-dos. Get a quote in as little as 6 minutes at ProgressiveCommercial.com

2401ECM_ProgressiveInsurance.indd 1 2403ECM_6-7_Viewpoint.indd 7

12/15/23 10:41 3/12/2024 10:58:56 AMAM

MARKET WATCH

The Largest Construction Projects of 2024

Federally funded trophy jobs will fill the construction pipeline again in early 2024.

By Jim Lucy, Electrical Wholesaling

D

evelopers of projects in the rail/transportation, semiconductor chip, and electric vehicle (EV) construction verticals continue to enjoy federal funding from the Infrastructure Investment and Jobs Act (IIJA) and the Creating Helpful Incentives to Produce Semiconductors (CHIPS) Act. While updating our construction project database, EC&M’s editors were surprised at the continuing surge of rail, semiconductor, and EV projects breaking ground or on the drawing boards (Table on page 10).

The Albany Nanotech research center in upstate New York is expected to eventually attract $10 billion in investment in new manufacturing facilities, research and development labs, and training from a consortium of semiconductor manufacturers, including IBM, Micron, Applied Materials, and Tokyo Electron for construction of the first and only publicly owned High NA Extreme Ultraviolet Lithography Center in North America.

The Port Authority of New York and New Jersey also has big construction plans, with a $3.6-billion capital expense budget to fund several major projects, including the ongoing construction at John. F. Kennedy Airport; the replacement of the Port Authority Bus Terminal; and the development of a new AirTrain system at Newark Airport.

Oklahoma City may one day be home to the tallest tower in the United States if the Matteson Capitol’s plans for the Boardwalk at Bricktown go through (Photo). The developer wants to build a 1,907-ft apartment mixed-used tower. According to a post at www.freepressokc. com and an article in The Oklahoman, the 5-million-sq-ft development, currently estimated at more than $700 million in total contract value, would also include 1,776 residential units in a 134-story apartment tower as well as restaurants and other retail stores.

Other trophy jobs include the Willets Point redevelopment in Queens, N.Y., which will include several hundred units of affordable housing and a $780-million soccer stadium; the $1.9-billion Children’s Hospital inpatient tower in Philadelphia now underway; and the $1.6-billion LG Energy battery plant in Queen Creek, Ariz.

Additional projects of note include the $480-million Project Cosmo data center in Cheyenne, Wyo., now in the planning stage; the $406-million Sherco Solar Farm underway in Becker, N.M.; the $315-million Florida State University Health Hospital, Tallahassee, Fla., now being planned; and the Sherwin Williams headquarters in Cleveland on the drawing boards.

Overall, forecasters with the American Institute of Architects (AIA) and the Dodge Construction Market and are looking for a steady, unspectacular year for the construction market.

8

If plans go through, the 5-million-sq-ft Boardwalk at Bricktown mixed-use tower in Oklahoma City is set to become the tallest building in the nation.

March 2024 • www.ecmweb.com

2403ECM_8-11_Market_Watch.indd 8

3/12/2024 11:08:40 AM

2403EC

2403ECM_ZipCableTraySystems.indd 1 2403ECM_8-11_Market_Watch.indd 9

1/26/24 3:17 3/12/2024 11:08:41 AMPM

MARKET WATCH Q1 2024 Large Construction Projects Contract Value ($ Millions)

10

Project

City

State

Project Type

Status

Source

10,000

Albany Nanotech research center

Albany

NY

Industrial Semiconductor

Partnership announced Dec. 2023

State of New York

3,600

Port Authority of NY & NJ’s multiple transportation projects

New York

NY

Mass transits

Funding announced Dec. 2023

Port of Authority of NY & NJ

Multibillion

Willets Point mixeduse redevelopment & $780-million soccer stadium

Queens

NY

Mixed-use & soccer stadium

Underway

nyc.gov

1,900

Children’s Hospital of Philadelphia Inpatient Tower

Philadelphia

PA

Hospital

Groundbreaking Nov. 2024

construction.com

1,600

LG Energy Battery Plant

Queen Creek

AZ

IndustrialEV battery

Groundbreaking Nov. 2024

construction.com

800

Two Mayo Clinic buildings

Rochester

MN

Hospital

Entered planning stage Dec. 2024

construction.com

800

The Anthem Data Center

Tulsa

OK

Data Center

Planning Stages March 2024

tulsaworld.com

750

Iowa Army Ammunition Plant

Middletown

IA

Government

Groundbreaking Nov. 2024

construction.com

736

Matteson Capitol’s Boardwalk at Bricktown - 1,900-ft tower & mixed-used project

Oklahoma City

OK

Office tower & mixed use

Entered planning stage Dec. 2024

construction.com

500

Universal Theme Park Kids Resort & Hotel

Frisco

TX

Hotel/Theme Park

Entered planning stage Dec. 2024

construction.com

480

Project Cosmo Data Center

Cheyenne

WY

Data Centers

Entered planning stage Nov. 2024

construction.com

406

Sherco Solar Farm

Becker

NM

Renewables

Groundbreaking Nov. 2024

construction.com

400

Dog River Industrial Park

Mobile

AL

Industrial

Entered planning stage Dec. 2024

construction.com

353

Silverhawk natural-gas fueled power plant

Moapa

NV

Electric utility

Groundbreaking Nov. 2024

construction.com

315

Florida State University Health Hospital

Tallahassee

FL

Hospital

Entered planning stage Nov. 2024

construction.com

300

Sherwin Williams headquarters

Cleveland

OH

Office

Entered planning stage Nov. 2024

construction.com

258

LA Convention Center exhibition hall

Los Angeles

CA

Convention Center

Entered planning stage Nov. 2024

construction.com

200

55 Broad St. multi-family project

New York

NY

Multi-family

Groundbreaking Nov. 2024

construction.com

200

Redevelopment of the Superman Building

Providence

RI

Multi-family

Groundbreaking Nov. 2024

construction.com

185

Union West mixed-use development

Raleigh

NC

Mixed-use

Groundbreaking Nov. 2024

construction.com

162

Semiconductor plant expansion funded by CHIPS program

Multiple sites

CO & OR

Industrial Semiconductor

Federal funding announced Jan. 2024

Dept. of Commerce

NA

69-acre Portage Bay Crossing on University of Washington Seattle Campus

Seattle

WA

Education - College & University

Ready to break ground in Jan. 2024

washington.edu

March 2024 • www.ecmweb.com

2403ECM_8-11_Market_Watch.indd 10

3/12/2024 11:08:42 AM

2403EC

Electrical contractors are discovering the many important advantages of Penn Aluminum Conduit & EMT compared to steel.

MADE IN AMERICA

• Lower total installed cost • 1/3 the weight of steel • Safer to lift/carry • 100% recyclable • Easier to bend and cut • Lower total installed cost

Today’s construction market is more competitive than ever, with electrical contractors needing ways to increase productivity while maintaining jobsite safety. Penn Aluminum Conduit & EMT offers solutions to meet these challenges. Aluminum provides numerous benefits compared to heavy steel conduit products, resulting in total installed cost savings.

That’s why Penn Aluminum Conduit & EMT is The Smart Choice for electrical contractors.

For additional information and resources visit:

pennconduit.com

2403ECM_PennAluminumConduit.indd 1 2403ECM_8-11_Market_Watch.indd 11

MADE IN AMERICA

2/29/24 11:56 3/12/2024 11:08:43 AMAM

INSIDE PQ

Understanding the Impact of Harmonics

How to mitigate the effects with power quality data

By Jason Axelson, Fluke

Photo 1. A true rms non-contact clamp meter can indicate when power quality issues are present in the electrical system.

P

ower quality measurements and data tracking are essential in determining the reliability and efficiency of your power system. Power quality is the measure of the consistency of the electrical supply that is delivered to your equipment and devices that rely on it to run smoothly.

Harmonics, in turn, are a component you want to watch out for while taking power quality measurements. They can have a significant impact on the performance of your system. Harmonics are essentially unwanted electrical frequencies that can distort the waveform of an electrical signal. They are caused by non-linear loads, like variable-frequency drives, computers, or electrical equipment that use switching power supplies.

These non-linear loads can produce harmonics that distort the waveform of the electrical signal, which can lead to a wide 12

A power quality analyzer shows that a non-linear load does not conform to the voltage waveform supplied.

March 2024 • www.ecmweb.com

2403ECM_12-15_Inside_PQ.indd 12

3/12/2024 11:12:17 AM

2312EC

Smart Performance, Everyday Convenience

Simplify Schedules

ETW3CP Intermatic Connect 365-Day Programmable Smart Wi-Fi Timer

with Our Retrofit-Friendly Wi-Fi Control Simplify lighting and load schedules with the ETW Series 365-Day Programmable Wi-Fi Timer.

This versatile smart control combines robust scheduling features with everyday convenience, including smart control via the Intermatic Connect app. Available in two or three-circuit models, the ETW Series allows for seamless scheduling of outdoor lighting, indoor lighting, motors, pumps, and more.

Features & Benefits • Flexible Programming • Remote Access • Intuitive Naming • Adjustable Scheduling

• Remote Override • Visual Cues • Service Mode

Intermatic.com

2312ECM_Intermatic.indd 1 13 2403ECM_12-15_Inside_PQ.indd

11/8/23 10:51 3/12/2024 11:12:18 AMAM

INSIDE PQ range of problems within your system.

See the Figure on page 12.

IMPACT OF HARMONICS ON YOUR SYSTEM

MRO Insider This e-newsletter, published monthly, is focused on electrical engineers, plant managers, maintenance engineers, facility and energy managers, maintenance supervisors, electricians, and technicians who work in industrial, commercial, and institutional facilities.

Topics covered include: • Maintenance, repair, and operations • National Electrical Code on the production floor • Safety procedures & programs

Subscribe Today See all of our EC&M e-newsletters at www.ecmweb.com

14 ECM-ads.indd 4

One of the most significant issues you may see if harmonics are present is increased heat in electrical equipment.

Overheating on transformers, motors, and other electrical devices can lead to reduced efficiency and premature failure.

Overheating can also cause insulation breakdown, which can result in short circuits, fires, and other safety hazards.

If you’re seeing a reduced power factor or lower efficiency of the power system, it could be another sign you’re dealing with harmonics. Power factor is essential to ensure that the electrical supply coming into your facility is used efficiently. Harmonics causing that reduction can have a cascading effect leading to increased energy consumption, higher utility bills, and reduced electrical system capacity.

The presence of harmonics can also be seen in smaller ways around your facility. Things like flickering lights or communication system interference.

No matter how the issues present themselves, harmonics can have a significant impact on the performance of your power system. It’s best to monitor and mitigate their effects when those issues show up.

MITIGATING THE EFFECTS OF HARMONICS

Start with making sure you have routine preventive maintenance checks of your non-linear loads. That way you can catch and address the problems before they get too large.

Once you have found an issue, you’ll want to start with the issues you’re seeing, properly identifying the root cause of the problem, and isolating the source. Start by measuring with a clamp meter that can indicate power quality issues (Photo 1 on page 12). A tool like this can help indicate total harmonic distortion (THD) and show all harmonics present. THD for voltage should not exceed 5% to 6%, and THD for current will run considerably higher.

Excessive THD for voltage means any number of problems could be occurring,

and you should continue to get to the bottom of them so corrective action can be taken. To further investigate the magnitude and effects of the individual harmonics, you’ll need more detailed information from a more powerful tool, like a power quality analyzer (Photo 2 on page 15).

Once you have found an issue, you’ll want to start with the issues you’re seeing, properly identifying the root cause of the problem, and isolating the source.

A power quality analyzer can record disturbances, like harmonics, in your line power by recording and monitoring the power quality over some time. Your analyzer can pick up all sorts of potential problems like dips and swells, wasted energy and electrical disturbances, or other issues that can cause the malfunction of control circuits.

Harmonics can be a significant problem in a power system, often leading to reduced efficiency, increased energy consumption, and larger safety hazards.

It’s important to monitor your power systems to identify the presence of harmonics and mitigate any havoc caused on a system before it creates costly downtime or repair issues. By taking these steps, power system operators can ensure that their systems are reliable, efficient, and safe.

Jason Axelson is a product application specialist for Fluke. He has more than 15 of experience helping customers and partners find solutions for power quality, scope meters, and battery testers.

March 2024 • www.ecmweb.com 3/30/18 7:04 PM

2403ECM_12-15_Inside_PQ.indd 14

3/12/2024 1:45:02 PM

Photo 2. Placing a power quality analyzer on a circuit is a good way to record disturbances in the system over time.

2403ECM_OrbitIndustries.indd 1

2403ECM_12-15_Inside_PQ.indd 15

www.ecmweb.com • March 2024

3/5/24 2:48 15 PM

3/12/2024 11:12:20 AM

ELECTRICAL TESTING EDUCATION

Is Troubleshooting Considered Energized Work?

A guide to NFPA 70E requirements for electrical troubleshooting and repair

By Ron Widup and James White, Shermco Industries

W

Photo courtesy of Shermco Industries

hen discussing electrical safety, a question frequently asked by NETA technicians is, “When does troubleshooting end, and when does repair begin?” This question is often paired with, “What does 70E say about troubleshooting and repair?” We hope to make things clear for everyone in the field.

NFPA 70E DEFINITIONS

To begin, look at the definition of “working on” (energized electrical conductors and circuit parts) in Art. 100 of the 2024 edition of NFPA 70E. It says, “Intentionally coming in contact with energized electrical conductors or circuit parts with the hands, feet, or other body parts, with tools, probes, or with test equipment, regardless of the personal protective equipment (PPE) a person is wearing.

“Informational Note: Examples of ‘working on’ can include but are not limited to diagnostic testing (such as taking readings or measurements of electrical equipment, conductors, or circuit parts with approved test equipment that does not require making any physical change

to the electrical equipment, conductors, or circuit parts) and repair or physical alteration of electrical equipment, conductors, or circuit parts (such as making

Electrical Testing Education articles are provided by the InterNational Electrical Testing Association (NETA), www.NETAworld.org.

NETA was formed in 1972 to establish uniform testing procedures for electrical equipment and systems. Today, the association accredits electrical testing companies; certifies electrical testing technicians; publishes the ANSI/NETA Standards for Acceptance Testing, Maintenance Testing, Commissioning, and the Certification of Electrical Test Technicians; and provides training through its annual PowerTest Conference and library of educational resources.

16

or tightening connections, removing or replacing components, etc.).”

A lot is going on in the above definition. The first sentence begins with “Intentionally coming in contact ….. with the hands, feet, or other body parts ….” So, in this definition, contact is not accidental, but intentional with any part of the body. This separates it from unintentional contact (incident) or any type of equipment failure. That sentence continues “with tools, probes, or with test equipment, regardless of the personal protective equipment (PPE) a person is wearing.” This makes it clear that using voltage testers or any other type of test equipment is included, and PPE doesn’t change this; you’re still working

March 2024 • www.ecmweb.com

2403ECM_16-23_NETA.indd 16

3/12/2024 11:13:52 AM

ARLINGTON LISTED • 2-HOUR FIRE RATING

Heavy duty BOX EXTENDER EXTENDS SET BACK BOXES UP TO 1-1/2 INCHES Arlington’s heavy duty, commercial-grade Box Extender delivers convenience and time-savings. © 2023 Arlington Industries, Inc.

NEW!

COMMERCIAL

GRADE

In addition to extending set back metallic and non-metallic electrical boxes up to 1-1/2”, BE1XLS, as shipped, works with maxi cover plates. It’s also trimmable for use with midi and standard plates. * great for poorly cut drywall!

Its galvanized steel support plate and non-metallic box extender level and support wiring devices, and protect wires against damage and stripping.

BE1XLS as shipped

BE1XLS Trimmed for use with Midi plate

122

800/233-4717 • www.aifittings.com

2403ECM_Arlington_906973-0324_122.indd 1

Product Info aifittings.com/landing/be1xls

Patent pending

2/20/24 12:19 PM

DUPLEX • DIECAST ZINC

COMBINATION COUPLINGS

TRANSITION from EMT to FLEXIBLE METAL CABLE... THE EASY WAY!

3/4" EMT

NEW

8675 and 8675SG combination couplings install easily on AC, MCI-A, HCF steel and aluminum cable, flexible metal conduit (steel and aluminum, regular and reduced wall), MCI cable and continuous corrugated aluminum.

And offer independent securing of different size cables.

8675 SNAP2IT®

BOTH STYLES secure cables independently © 2023 Arlington Industries, Inc.

Arlington’s new duplex diecast couplings save time and money! They allow easy transitions from 3/4" EMT to 3/8" trade size flexible metal cables – perfect for running MC cable above a drop ceiling and connecting to surface mounted EMT to feed a box or switch.

• Tested, LISTED to exceed UL ground fault requirements • Ships Assembled – Compatible with 3/4" EMT Available in Snap2It® ...and SADDLE GRIP® styles 8675SG

8675

88

8675SG Saddle Grip® Patent pending

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866431-1223_88.indd 1 2403ECM_16-23_NETA.indd 17

Product info aifittings.com/landing/zinc-combination-couplings

11/14/23 1:13 PM 3/12/2024 11:13:53 AM

ELECTRICAL TESTING EDUCATION

E-Train This e-newsletter, published monthly, brings you the latest training courses available in the industry. Rely on E-Train for refresher courses or for continuing education.

Topics covered include: • PLC certification • Short-circuit current ratings • Relay testing • NFPA 70E • Thermal imaging • Lighting controls

Subscribe Today See all of our EC&M e-newsletters at www.ecmweb.com

18 ECM-ads.indd 2

Photo 1. Panel area where the apprentice performed work.

on energized electrical conductors or circuit parts. Many technicians believe that troubleshooting is not “working on.” Clearly, it is, and appropriate PPE is necessary.

The Informational Note states there are two categories of “working on”: 1) diagnostic testing; and 2) repair. Diagnostic is defined as “taking readings or measurements of electrical equipment, conductors, or circuit parts with approved test equipment that does not require making any physical change to the equipment.” This would include

absence-of-voltage testing, troubleshooting, calibration, or voltage testing.

Again, PPE is mandatory because using voltage-rated probes on energized electrical equipment is not considered safe. There is an exception in Chapter 3 for laboratory work, but it would not apply to NETA-type testing and maintenance work. Article 350 applies to this work where a specifically trained and responsible person known as the Electrical Safety Authority (ESA) can make job-specific requirements that may be different than those found in Chapter 1.

March 2024 • www.ecmweb.com 3/30/18 7:04 PM

2403ECM_16-23_NETA.indd 18

3/12/2024 11:13:54 AM

ARLINGTON ONE-PIECE. SAVES TIME – LOOKS GREAT!

RECESSED IN BOX

®

LOW PROFILE, EXTRA DUTY COVER • TWO STYLES for 1-1/2" and Foam Wall Systems

IN BOX installs in the wall – so less shows outside. Fewer parts to handle. Time savings. A greatlooking job with Arlington’s IN BOX! • Non-metallic, 22.0 cu. in. box with EXTRA-DUTY weatherproof-in-use clear or white cover

DBVMA1W

DBVMA1C clear cover

in fo plicatio ap

ble usta th p e d

DBVMA1W white cover

Product Info aifittings.com/landing/db-series

800/233-4717 • www.aifittings.com

DBVME1W

Built-in FIXED FLANGE

IN BOX MEETS 2020 NEC Section 406.9 for protection of exterior outlets which require the use of extra-duty weatherproof-inuse cover for all outdoor 15 or 20 AMP receptacles.

Adj

28

INU CONT LATION U INS am sheathnsing

• Accepts single-gang devices; no gaskets required

ADJUSTABLE Depth

Fits ANY foam board on 2-3/4" to 5" wall or custom stucco finishes 1/4" to 2-1/2" thick.

elp for Htaining in in Ma OUS

© 2011-2015 Arlington Industries, Inc.

One-piece IN BOX®, the recessed electrical box for exterior use, eliminates installing an electrical box and bubble cover assembly, so you save big on labor and materials.

For 1-1/2" wall systems, including foam.

Eliminates separate flashing.

DBVME1W white cover Patented/Additional patents pending

2312ECM_Arlington_866447-1223_28.indd 1

11/14/23 2:46 PM

SPLIT GROUNDING BUSHINGS for THREADED and Also Compatible with EMT UNTHREADED conduit

THREADED conduit

UNTHREADED RIGID and IMC Get convenience and time-savings with Arlington’s 550 series SPLIT grounding bushings.

The split allows the addition of a bushing AFTER conductors are installed in threaded or unthreaded Rigid/IMC conduit. Great for tight spaces!

• In 1/2” to 4” trade sizes – Ships Assembled • Compatible with EMT, 2-1/2" to 4" trade sizes, and threaded electrical fittings

© 2023 Arlington Industries Inc.

EASY TO INSTALL

1 Loosen side screws.

Allow bushing to pivot around installed cables

30A

SPLIT 800/233-4717 • www.aifittings.com

2401ECM_Arlington_8803430124_30a.indd 1 2403ECM_16-23_NETA.indd 19

2 Tighten set screw to seat bushing on conduit

1

2 aifittings.com/landing/split-grounding-bushings

12/20/23 1:07 PM 3/12/2024 11:13:55 AM

ELECTRICAL TESTING EDUCATION

Photo 2. The upper cabinet in this switchgear lineup lacks a “Danger High Voltage” label.

The second category of working on (repair) is defined as “any physical change to the electrical equipment, conductors, or circuit parts (such as making or tightening connections, removing or replacing components, etc.).” We have seen many instances where this is misunderstood or just violated, especially during maintenance-type activities.

potential transformers. This compartment was marked “PT Compartment,” but it did not have a sign on it warning

of high voltage. The compartment immediately below the PT compartment did have a “Danger High Voltage” sign on the top of its compartment door (Photo 2).

The apprentice opened the door without the warning label and attempted to test the terminals of the 4,160V PTs. There was no indication of danger to the technician (Photo 3).

As soon as the test probes touched the PTs, an arc flash occurred. The apprentice was fortunate, as he survived the incident, but he spent several days in the hospital’s burn unit. He could have very well died, as he was not wearing any PPE. Photo 4 on page 22 shows the aftermath of the PTs blowing up, while Photo 5 on page 22 shows the low-voltage tester used to test 4,160V PTs — a catastrophic scene for sure.

This case history, “Who’s at Fault — Owner or Contractor?” was presented at an IEEE Electrical Safety Workshop by Joseph Andrews. It shows why the 70E definitions are so critical. What people don’t know, they don’t know. There is a ton of useful information contained in

A TROUBLESHOOTING CASE STUDY

Here’s a true story. A job leader took an apprentice to a switchgear room where low- and high-voltage equipment was installed. He pointed out areas the apprentice was to avoid, such as the main incoming line compartment. He worked with the apprentice for some time cleaning low-voltage connection strips and the inside of the panels.

When the job leader was called away to another part of the job, he told the apprentice, “Don’t work on anything that looked hot,” and walked away. The apprentice continued to clean, tighten connections, and inspect the lowvoltage control compartments. In each compartment, he used his voltmeter to determine whether the terminals were energized (Photo 1 on page 18).

Then, the apprentice came to a compartment that contained 4,160V 20

Photo 3. The apprentice had no cause for concern when he looked at the equipment in this cabinet.

March 2024 • www.ecmweb.com

2403ECM_16-23_NETA.indd 20

3/12/2024 11:13:58 AM

ARLINGTON SECURE, JOIST-MOUNT INSTALLATION

FAN/FIXTURE PAN BOX FOR 1/2" OR 5/8" DRYWALL WITH FURRING STRIPS OR HAT CHANNEL

* 2-HOUR FIRE RATING

Arlington’s convenient fan/fixture pan box works with 1/2", and single or double 5/8" drywall – on furring strips or hat channel.

• Easy mounting in new work • Fan bracket installation screws ship captive until ready for use

© 2017 Arlington Industries, Inc.

FB412

• Secure joist-mount installation

Captive fan bracket installation screws

• 14.4 cu. in. UL/CSA Listed

UL rated 70 lb fan • 200 lb fixture CSA 50 lb fan/fixture

32

800/233-4717 • www.aifittings.com

FB412 with 5/8" double drywall

Product info aifittings.com/catalog/fan-fixture-boxes/fan-fixturemounting-boxes-for-drywall-with-furring-strips-or-hat-channel/FB412

2402ECM_Arlington_902053-0224_32.indd 1

1/22/24 2:54 PM

ADJUSTABLE BRACKET • FOR NEW CONSTRUCTION

FAN FIXTURE BOX FLUSH CEILING INSTALLATIONS

© 2004-2013 Arlington Industries, Inc.

Captive screws attach bracket ends to joists

Arlington’s heavy-duty, plated steel fan/ fixture box has an adjustable bracket that mounts securely between joists spaced 16" to 24" o.c.

Flush ceiling installations FBRS415 is designed for ceilings up to 1-1/4" thick.

For 1/2" ceilings, use the pre-bent positioning tab.

For other ceiling thicknesses, bend along the appropriate score line.

• 15.6 cu. inch box ships with captive screws, mud cover, installed NM cable connector Fan bracket installation screws

Attach to joists, adjust box position

FBRS415 Patented

UL ratings 70 lb fan/90 lb fixture at 24" oc 70 lb fan/150 lb fixture at 16" oc

41

CSA rated 50 lb fan/fixture at 16" and 24"

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866406-1223_41.indd 1 2403ECM_16-23_NETA.indd 21

Product info aifittings.com/landing/fbrs415

Captive screws from both sides attach bracket ends to joists

Positions box between joists Positioning tab for 1/2" ceilings

11/14/23 12:19 PM 3/12/2024 11:13:59 AM

ELECTRICAL TESTING EDUCATION the Art. 100 definitions. You may feel there is no danger in using an insulated (or uninsulated) screwdriver to tighten connections or in using a voltage tester to perform absence-of-voltage testing.

However, there could be danger lurking just around the corner.

Chapter 1, Art. 130, Sec. 130.2(C) provides exemptions to the use of an energized electrical work permit. The entire section is reproduced below: “(C) Exemptions to Work Permit.

Electrical work shall be permitted without an energized electrical work permit if a qualified person is provided with and uses appropriate safe work practices and PPE in accordance with Chapter 1 under any of the following conditions: (1) Testing, troubleshooting, or voltage measuring (2) Thermography, ultrasound, or visual inspections if the restricted approach boundary is not crossed (3) Access to and egress from an area with energized electrical equipment if no electrical work is performed and the restricted approach boundary is not crossed (4) General housekeeping and miscellaneous non-electrical tasks if the restricted approach boundary is not crossed” Note that the first sentence says, “Electrical work shall be permitted without an energized electrical work permit if a qualified person is provided with and uses appropriate safe work practices and PPE in accordance with Chapter 1 under any of the following conditions.” The person must be qualified to begin with. Unqualified persons are not permitted to be near energized electrical conductors or circuit parts.

Second, that qualified person must be provided with and use appropriate safe work practices and PPE. An unqualified person would not know or be able to determine what is appropriate. The person in the case history above could not determine those two things.

CONCLUSION

Supervisors at any level — whether it’s in their title or not — must not make assumptions about what a person knows or doesn’t know. They must ensure the technician’s safety.

22

Photo 4. The remains of the PTs in the upper cabinet.

Photo 5. The remains of the apprentice’s voltage tester.

Troubleshooting, testing, and even tightening connections are considered by many to be safe. The previous example shows how wrong that assumption can be — and it is not just apprentices who make that mistake. Troubleshooting the control power transformer on a 4,160V motor starter has caused many incidents.

One technician told us how the guts of his Wiggy (he was pretty old) flew across a building, striking 15 feet high on the opposite wall. If that coil had hit him, he would have been severely injured or

killed. With electricity, small mistakes can be painful or fatal.

Author’s Note: This article was originally written by James R. “Jim” White of Shermco Industries. We have taken Jim’s work, updated it, and offered this revision in his honor. Great job, Jimbo!

Ron Widup is the vice chairman, board of directors, and senior advisor of technical services for Shermco Industries and has been with Shermco since 1983. He can be reached at rwidup@shermco.com.

March 2024 • www.ecmweb.com

2403ECM_16-23_NETA.indd 22

3/12/2024 11:14:01 AM

ARLINGTON SAVES TIME • LISTED

SNAP-TITE TRANSITION FITTING ®

ALLOWS CABLE, CONDUIT INSTALLATION IN TIGHT SPACES In a tight spot? Arlington’s new SNAP-TITE® Transition Fitting offers the time-saving solution for installing additional conduit or cable in an already congested panel.

It allows installers to work around tightly spaced, installed fittings in a panel, box or enclosure – where installing and tightening additional locknut fittings would be next to impossible.

2450ST SNAP-TITE® Transition Fitting

© 2023 Arlington Industries, Inc.

Dry Location Only

Convenient, Time-Saving 2450ST snaps into a 1/2" knockout 2450ST and connects 1/2" trade size threaded fittings or pipe.

Threaded fittings

Patent pending 123 C

Threaded pipe

800/233-4717 • www.aifittings.com

aifittings.com/landing/2450st

2312ECM_Arlington_866403-1223_123.indd 1

11/14/23 11:51 AM

RECESSED FOR FLUSH-TO-THE-WALL MOUNTING OF LED, HI-DEF TVs

STEEL TV BOX™KIT CO M B O BOXES FOR USE WI TH METAL RACEWAYS Arlington’s recessed STEEL combination power/low voltage TV BOX™ is the best way to mount an LED or Hi-Def TV flush against a wall.

retrofit

Mounting wing screws hold box in the wall

© 2008-2020 Arlington Industries, Inc.

TV BOX provides power and/or low voltage in one or more of the openings.

Plugs and connectors stay inside the box, without extending past the wall.

Designed for use in new or retrofit commercial construction where metal raceway is used, we have a STEEL TV BOX for almost any application!

New work

2-GANG TVBS505

Mounting screws hold box on stud

• Steel box; non-metallic paintable white trim p plate • Easy, secure installation

!

NEW 1-GANG TVBS503

• Optional covers Patented

3-GANG TVBS507

98

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866438-1223_98.indd 1 2403ECM_16-23_NETA.indd 23

Product Info aifittings.com/landing/recessed-tv-boxes

11/14/23 1:50 PM 3/12/2024 11:14:02 AM

By Dr. Heather Moore and Dr. Perry Daneshgari, MCA, Inc.

Learn how to define, measure, and improve productivity.

P

roductivity, like any other word, is very often left to interpretation of the user.

Unless it’s clear what it is supposed to represent, it could be a very confusing means of measurement. Definitions of productivity can relate to economic factors or individuals. An inquiry in any search engine will result in something like:

“Productivity, in economics, measures output per unit of input, such as labor, capital, or any other resource. It is often calculated for the economy as a ratio of gross domestic product (GDP) to hours worked.”

Labor productivity may be further broken down by sector to examine trends in labor growth, wage levels, and technological improvement. Corporate

Waste on a job site like this is an often common but obvious red flag when it comes to maximizing labor efficiency.

24

profits and shareholder returns are directly linked to productivity growth.

At the corporate level, productivity is a measure of the efficiency of a company’s production process. It is calculated by measuring the number of units produced relative to employee labor hours or by measuring a company’s net sales relative to employee labor hours. Here’s a quick summary to make sure we’re all on the same page at this point.

• Productivity, in economics, measures output per unit of input.

• When productivity fails to grow significantly, it limits potential gains in wages, corporate profits, and living standards.

• The calculation for productivity is output by a company divided by the units used to generate that output.

• Auto giant Toyota and online marketplace king Amazon are prime examples of businesses with an impressive level of productivity.

• Productivity in the workplace refers simply to how much work is done over a specific period.

Ask ChatGPT the same question, and (depending on what you type into the prompt) you’ll get something like this: “Productivity generally refers to the measure of efficiency and effectiveness in completing tasks or achieving goals, often in relation to the resources utilized. It is a key concept in various fields, including economics, business,

March 2024 • www.ecmweb.com

2403ECM_24-29_Cover_Story.indd 24

3/12/2024 11:20:13 AM

and personal development. Productivity can be assessed at individual, organizational, or societal levels and is typically expressed as the ratio of output to input.”

In the context of work or business, productivity is often associated with the amount of output (goods, services, or work) produced per unit of input (time, labor, capital, etc.). Higher productivity implies that more is accomplished with the same or fewer resources, reflecting efficiency improvements.

These definitions or measurements leave a lot to be desired for the electrical contracting community about how to measure, correct, and improve labor productivity. All the measurements are related to the system’s output and not the outcome, as noted in ASTM E2691-20: Standard Practice for Job Productivity Measurements. They also do not help contractors define the waste to improve productivity.

In construction, the phrase “productive labor” is used to define an individual’s pace of work. Both of these methods (the economic and individual productivity measurements) make one flawed assumption — everything that labor does contributes to productivity.

One visit to most jobs will quickly prove that assumption wrong. For example, the job site environment depicted in the Photos shows the realities of activities that have nothing to do with individual pace of work. In fact, you could have the most productive, well-trained, motivated electricians who simply cannot get their work done because other trades’ materials are in the way.

To define the productive activities, you should start by identifying the wasteful activities. The Table on page

26 shows a list of wasteful activities on a job site. These activities can consume more than half of the labor’s time and kill productivity. Even though the output gets corrected “eventually,” the wasteful activities still drive unnecessary costs and time in construction. The customer may be happy with the final product because they didn’t have to pay as much or wait as long to get it. For example, the role of electrical inspectors is to uphold the National Electrical Code (NEC) requirements; however, when a foreman has to double-check his journeyman’s work to make sure it’s correct before it even gets to final inspection, that is waste — and this doesn’t even take into account the time it will take to correct the work if it’s wrong.

Once the waste is understood, now it needs to be measured. Before you do that, however, let’s take a look at two consecutive days on the same hypothetical job site.

Figure 1 on page 26 depicts the potential differences on a job site with and without interruption. On both of these days, the labor will be considered productive because: 1. They showed up on time.

2. They did everything they were told to do.

3. They got paid in full for a full day of work.

So why would one day be considered more productive than the other?

When specialty trades arrive on job sites like the ones shown in these three photos, which are in complete and utter disarray, labor productivity inevitably suffers.

Electrical contractors should visit their job sites regularly and unannounced.

Although it may seem like a waste of time, doing so could save you a lot of time and money, especially if you come upon these types of scenarios.

Because as willing and productive of labor as you might have on the job site, for the workers to be able to produce an outcome, they need to be able to do the work that they contracted will get paid for as planned and scheduled. Ask yourselves, when are you going to be able to catch up with the lost time when all the days are spoken for? www.ecmweb.com • March 2024

2403ECM_24-29_Cover_Story.indd 25

25

3/12/2024 11:20:15 AM

In Construction, WASTE = Whatever the Labor Does Other Than Final Installation Type of Waste Material handling Chasing down missing information Rework Movement around the job site Inspection Wrong installation

Examples Ordering, receiving, returning, moving, unpacking, counting, sorting, or checking material Latest drawings, RFIs, POs, schedules Taking down or pulling out material already installed To/from break rooms or restrooms, moving from one area to another for installation Checking others’ work or own crew’s work Installing the wrong material, installing in the wrong location, etc.

Source: Agile Construction®: For The Electrical Contractor, 2nd Edition, by Dr. Perry Daneshgari

Table. Examples of waste on a construction site.

Day 1

Day 2

8 Hours

8 Hours

Straight Run 1,000 feet in 8 hours

Straight Run with Interruptions 250 feet in 8 hours

Source: Agile Construction®: For The Electrical Contractor, 2nd Edition, by Dr. Perry Daneshgari

Fig. 1. Comparing conditions, which could be masked without proper feedback.

To improve productivity outcomes and reduce the impact of labor force shortage errors, “go-backs,” and waste have to be identified, categorized, and quantified. These issues used to be felt only by the trade contractors, where productivity directly impacted their pocketbooks. However, given the ongoing labor shortage, the issues with on-time and on-budget project deliveries will persist for general contractors too.

To improve this situation, all parties in construction need to focus on the data-driven approach to reduce waste.

Our February 2021 Job-Site Intelligence column, “Managing Schedule Changes on the Job Site,” gives how-to guidance on using agile project scheduling (APS) to connect the management of work, effort, and time between all parties on a job site, using data not just “coordination meetings” and “conversations” to raise and resolve problems. Agile construction techniques provide a way to identify trades’ obstacles and work progress, which neither lean nor IPD processes were able to achieve on their own.

26

The tools to make this change happen have been discussed in many of MCA’s previous articles in EC&M, including: 1. Digitalization of the work to be performed in the format of a work breakdown structure (WBS).

2. Measurement of production rate and its acceleration and deceleration.

3. Daily schedules, which identify, categorize, and quantify the obstacles.

4. Feedback to the company and project manager.

Once you have the activities on the job site categorized, you can then use established methods to measure and reduce the impact of the non-value transfer activities (NVTA) and increase the value transfer activities (VTA).

Figure 2 shows one of these measurements as well as the before and after improvements. One of the established tools to measure NVTA is SIS(R), which is part of ASTM E2691 for Common Cause variation management. Figure 3 on page 28 is a sample of the obstacle activities on a job site that contribute to the NVTAs.

To move this viability further upstream, Staff Electric Company in Milwaukee is using a collaborative tool (DCI™) to enable AI application from the time a job is bid to the closure of it.

The NVTAs start at the preconstruction phase of any project and continue to its closure and commissioning. Figure 4 on page 28 shows the predictive nature of the DCI. In conclusion, for five decades the construction industry has continued to stagnate on the labor productivity front (Fig. 5 on page 28). Now, with fewer labor “inputs,” this equation will certainly result in less construction put-in-place (CPIP). Paying attention to waste and improving the value transferred by construction trades has gone from an electrical contractor’s competitive advantage to an industry requirement.

Any electrical contractor would say they are interested in productivity improvement, but using the correct definition, measurement, and resulting data

Electricians’ Time 40

Hours per Week

Different Day, Different Results

Productive Time Spent Installing and Completing the Task

30

Material Handling

20

Congestion Delays, Weather Delays, Lack of Tools or Information Rework Unproductive Time

10 0

Current

Future

Source: Agile Construction®: For The Electrical Contractor, 2nd Edition, by Dr. Perry Daneshgari

Fig. 2. Comparing NVTA and VTA activities with categories, before and after improvement.

March 2024 • www.ecmweb.com

2403ECM_24-29_Cover_Story.indd 26

3/12/2024 11:20:16 AM

2403EC

SAVE TIME... ONE-PIECE • NON-METALLIC

QUICKLATCH

™

EASY TO USE PIPE HANGER • NOW WITH INSTALLED STRUT CLIP 000 NM2 ies ser

PRESS IN

MOUNT 1/2” to 4” QUICKLATCH

LOCKED!

Mounts to wall, strut, stud or threaded rod 2-1/2" NM2060 • 3" NM2070 • 3-1/2" NM2080 • 4" NM2090 for RIGID, IMC, PVC, EMT

NEW! Extra-Duty with PRE-INSTALLED Strut Clip Extra-duty one-piece design Pre-installed strut clip for faster installation on strut Stainless steel screw

NE3W 100 NM ries

Patented

se

Arlington’s corrosion-resistant QUICKLATCH™ pipe hangers cost the same as a steel pipe hanger with a bolt and nut – but better.

MOUNT. PRESS PIPE into QUICKLATCH. DONE!

They’re faster and easier to install.

And SAVE 25 seconds* per installation!

• UV rated for outdoor use 124

SAVES DS N

25 SEtCaOllation!

per Ins

• Listed for environmental air handling spaces • For thin walls, rigid conduit, PVC conduit or copper

* about 33¢ each at $60/hr labor rate

w/ Pre-installed Strut Clip 1/2" NM3105 for RIGID, IMC, PVC – NM3100 for EMT 3/4" NM3115 for RIGID, IMC, PVC – NM3110 for EMT 1" NM3125 for RIGID, IMC, PVC – NM3120 for EMT

www.aifittings.com Scranton, PA 18517 800/233-4717 Product Info aifittings.com/landing/quicklatch_series

2403ECM_Arlington_907007-0324_124.indd 1 2403ECM_24-29_Cover_Story.indd 27

© 2023 Arlington Industries, Inc.

2/20/24 12:26 3/12/2024 11:20:17 AMPM

SIS® Pareto Chart Hours Not Worked as Scheduled (HNWAS): 26,780 Occurrences: 1,251 % of Total HNWAS: 5%

Source: Agile Construction®: For The Electrical Contractor, 2nd Edition, by Dr. Perry Daneshgari

100%

350

80%

300 250

60%

200 40%

150 100

20% 0%

Manpower Shift from Supervision

Change Orders

Labor Quality/ Skill Issues

Labor/Personnel Issues

Coordination Issues

Underestimated Scheduled Work

Material

Area not Ready

Lack of Access to Area

Absenteeism

0

Trade Interference

50

Hours Not Worked as Scheduled as % of Total Hours Not Worked as Scheduled

400

Technical/Design Issues or Questions

Count of Hours Not worked as Scheduled and Obstacle Occurrences

Hours Not Worked as Scheduled (HNWAS) Occurrences % of Total HNWAS

Fig. 3. Obstacles on the job site (like those shown in the Table), categorically contributing to lack of productivity.

DCI Construction® — Pipeline and Backlog Source: Agile Construction®: For The Electrical Contractor, 2nd Edition, by Dr. Perry Daneshgari

Backlog

Pipeline

Total No. of Projects

60

25,000,000

50

20,000,000

40

15,000,000

30

10,000,000

20

5,000,000

10

0

Q2-2022

Q3-2022

Q4-2022

Q1-2023

Q2-2023

Q3-2023

Q4-2023

Q1-2024

No. of Projects

Contract/Bid Value ($)

30,000,000

0

Fig. 4. Application of AI for job-site visibility from pipeline to closure.

28

Labor Productivity (1964-2022)

3.50

Non-farm Productivity Index

Construction Productivity Index

3.00 2.50 2.00 1.50 1.00 0.50 2021

2018

2015

2012

2009

2006

2003

2000

1997

1994

1991

1988

1985

1982

1979

1976

1973

1970

© MCA R&D

1967

0

1964

Dr. Perry Daneshgari is president and CEO of MCA, Inc., Grand Blanc, Mich.

He can be reached at perry@mca.net.

Dr. Heather Moore is vice president of customer care and support. She can be reached at hmoore@mca.net.

Productivity of Construction vs. Other Industries

Labor Productivity Index

to get there is the key. From the job-site intelligence you can gain in reviewing our regular columns to the application of agile construction principles, reducing waste is not as complicated as it seems. It starts in the work environment — not in spreadsheets or accounting software. There’s a lot of wasted effort, cost, and time on your job sites right now. The best place to start is to get out there and observe, measure, and think systematically of what you can do to make it better.

Fig. 5. Construction labor productivity needs to improve.

March 2024 • www.ecmweb.com

2403ECM_24-29_Cover_Story.indd 28

3/12/2024 11:20:18 AM

ARLINGTON NON-METALLIC • VENTED FOR EASIER STACKABILITY

CONCRETE PIPE SLEEVE THE EASY, ECONOMICAL WAY TO SLEEVE THROUGH CONCRETE POURS!

Arlington’s Concrete Pipe Sleeves are the economical way to sleeve through concrete pours in tilt-up construction WALLS – and FLOORS allowing cable and conduit to run easily from one floor to the next.

No costly core drilling – No cutting holes in the form.

Plus, you can position the hole prior to pouring the concrete.

CPS40 Pipe Sleeve for 4" hole

• Attaches to form with nails or screws • Stackable up to 23" h for extra deep pours • Vents keep wet pipe sleeves from sticking together

CPS40

© 2007/REV2014 Arlington Industries, Inc.

• Multiple hole sizes: 1-1/2" • 2" • 3" • 4" • 5" • 6"

21 Nail sleeve to form.

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866432-1223_21.indd 1

After concrete sets, cut sleeve flush with surface.

Product info aifittings.com/landing/concrete-pipe-sleeve

11/14/23 1:21 PM

UV RESISTANT • 100% RECYCLED MATERIAL

ROOF TOPPER

NEW SLED STYLES

®

RELIABLE ROOFTOP SUPPORT OF CONDUIT, CABLE TRAY ROOF TOPPER® supports raise conduit/raceway 4" or more off the roof surface, allowing contractors to comply with the 2017 NEC® for temperature adjustment for circular conduit.

RTSE405 5" w

5-5/8" H RTSE409 9" w

The heavy-duty base, made of 100% recycled material, sits on the roof deck.

There’s no need to mount ROOF TOPPER to the surface with mechanical fasteners.

RTS4

Offered in a variety of sizes and configurations, ROOF TOPPER supports up to 2000 lbs, and stands up to extreme rooftop conditions protecting and elevating conduit or raceway above the roof deck.

5-5/8" H RTS4

STRUT ATTACHED w END CLAMPS RTSE1209 9" w x 12" h

12" H

9" wide

RTS421

t

© 2011-2015 Arlington Industries, Inc.

Insert conduit into sleeve.

114

Ra Raceway raised 12" above the roof 12

21" w

RTS12 9" w

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866443-1223_114.indd 1 2403ECM_24-29_Cover_Story.indd 29

Product info aifittings.com/landing/rooftopper

RTS1221 21" w

Patented

11/14/23 2:57 PM 3/12/2024 11:20:19 AM

How Prefab Solutions Boost Labor Productivity

P

A look at use cases and best practices

By Sean Nacey, Wesco

HOW THIS APPROACH WORKS

At its core, prefab solutions allow contractors or their distribution partners to leverage lower-skilled/cost labor 30

Photo courtesy of Wesco

I

magine hiring a five-star chef and expecting them to not only prepare a meal but also create the menu, shop for groceries, purchase all the cooking supplies, and even chop vegetables. You wouldn’t do that, of course, for two main reasons. First, the low-skill prep work could be done long before the chef arrives. Second, you want the highly specialized (and highly paid) chef focused on what they do best: cooking the meal. You don’t want to waste money paying the chef to perform tasks that just about anyone could do. In a construction environment, the same theory applies. You want the highly skilled and specialized workforce to focus on areas that only they are equipped and licensed to perform.

One labor productivity solution that electrical contractors can leverage is prefabricated (or prefab) solutions. This can help contractors get the maximum value out of skilled labor, which also is expensive and in short supply. While using prefab solutions isn’t a new approach, labor shortages and an increasing desire to maximize profitability bring these solutions to the forefront as a mechanism to improve efficiency and effectiveness in today’s tight labor market. But while it can be helpful, prefab solutions don’t apply to every situation. There are certain types of projects where they may be more relevant than others.

Electrical contractors or their distribution partners can leverage lower-skilled/cost labor to perform repetitive tasks at their place of business instead of at the job site.

to perform low-skill, often repetitive tasks off site — typically at their place of business instead of at the job site.

This can encompass everything from unpacking products to assembling basic components (such as luminaires or electrical box assemblies) and then transporting them to the job site in a state where they can be simply installed by a licensed electrician. By executing these routine tasks off site, contractors can reduce their operating costs, while empowering skilled workers to focus on those tasks that only they are equipped to complete.

WHEN TO USE IT

Generally, prefab solutions are most effective on large-scale projects that have a lot of repetitive elements, such as hotels, multi-family homes, commercial buildings, and manufacturing facilities. In a hotel project, for example, there could be hundreds of similar-sized rooms — all with the same lighting and overall electrical design (e.g., all receptacles in the same spot). In this example, lighting kits can be assembled and pre-wired off site, allowing the electrical contractor to more quickly and efficiently install the equipment upon arrival to the job site.

March 2024 • www.ecmweb.com

2403ECM_30-33_Prefab.indd 30

3/12/2024 11:22:21 AM

2403EC

SAVE TIME. NO TOOLS. EASY PUSH ON INSTALLATION

PUSH-ON CONNECTORS !

NEW g r er

for NON-METALLIC LIQUID-TIGHT CONDUIT TYPE B

La izes S

1.25"•1.5"•2" Non-metallic PUSH ON

NMLT20 2"

vs

NO TOOLS!

Conventional installation

NMLT50

SAVE 40 seconds per connector!

DONE. NON-METALLIC

Save time and money with Arlington’s plastic or zinc Snap2It® push on connectors. They offer the fastest, easiest installation on non-metallic liquid-tight conduit, type B. FORGET the TOOLS! Simply push the connector on to conduit. That’s it!

Competitively priced, they’re removable and reusable too.

93B

Straight and 90° 1/2", 3/4" and 1" trade sizes* NEW LARGER Non-metallic sizes 1-1/4", 1-1/2" and 2"

LARGER

You’ll get a super-secure, liquid-tight seal.

Plus, they ship fully assembled – No disassembly required.

NMLT9012 1-1/4"

Catalog Number

Trade Size

NMLT5 NMLT905 NMLT7 NMLT907 NMLT10 NMLT9010 NMLT12 NMLT9012 NMLT15 NMLT9015 NMLT20 NMLT9020

1/2" 1/2" 3/4" 3/4" 1" 1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2"

Straight 90°

4 4 4 4 4 4 4 4 4 4 4 4

* Also available in zinc for metallic Patented.

Other patents pending

and non-metallic liquid-tight conduit, type B

www.aifittings.com Scranton, PA 18517 800/233-4717 Product Info aifittings.com/landing/nmlt20

2403ECM_Arlington_907010-0324_93B.indd 1 2403ECM_30-33_Prefab.indd 31

© 2012 REV1223 Arlington Industries, Inc.

3/11/24 1:39 PM 3/12/2024 11:22:22 AM

Photo courtesy of Wesco

G

F

By executing routine tasks off site and transporting them ready to go to the job site, contractors can reduce their operating costs significantly.

Prefab solutions are also especially helpful on solar projects. Any solar project that uses more than three solar panels will need to incorporate a combiner box, which, as the name implies, combines the electrical output of multiple panels into a single circuit. Combiner boxes simplify the wiring structure and maintenance but take a significant amount of time to assemble. Using prebuilt combiner boxes that arrive ready to install can materially reduce on-site labor and cost. And as the number of solar projects grows (along with their size and complexity), the importance of using solutions that save installation time cannot be understated.

With non-productive labor averaging 31% of a labor unit, a bit of ingenuity could help to optimize labor and ensure that a skilled worker’s time is not wasted on low-skill, repetitive processes. Utilizing prefab solutions can significantly cut down on the cost and scope of work executed at the job site.

There’s also an element of safety and comfort to consider in determining when to use prefab solutions. Contractors don’t always work in ideal conditions. They may have to wire or install service panels in extreme cold or work in a crawl space or attic that’s 110°F on a hot summer day. Utilizing prefab solutions can help cut down on time spent in extreme conditions. It can also allow contractors to leverage large equipment or automation processes that simply aren’t feasible in the field. In a market where labor is at a 32

premium, helping to ensure comfortable working conditions can be a competitive advantage that attracts much-needed skilled workers.

PREFAB BEST PRACTICES

If going the prefab route makes sense for your project, it’s also important to consider several best practices to ensure you’re maximizing your return on investment (ROI).

Understand when and where to use them: Utilizing prefab solutions offers several benefits, but might not make sense in every application. Does the size or scale of the project justify it? Does the job-site location or geographic footprint make prefab more cost-effective? Would it make your business more competitive in a bid, or create new opportunities?

Understand the volume you need to justify your investment: Prefab operations can encompass anything from a few people to a 100,000-square-foot facility with dozens of employees and large, complex equipment. Regardless of the investment level, you want to ensure workers consistently have projects to work on to justify the cost.

Lean on value-added partners: Partners can be especially helpful when it comes to utilizing prefab solutions effectively. At a minimum, they can help you understand if it makes sense for your project or business. In certain applications, they can even provide the prefab solution(s), such as a solar combiner

box, freeing up worker time. They can also help amplify your team’s expertise and capabilities. For example, a commercial building project might also include installing advanced security cameras that incorporate sensors and analytic capabilities. If that falls outside your organization’s area of expertise, the right partner can provide the products pre-assembled, pre-configured, and ready to install.

DELIVERING ON PROJECT EXECUTION

From supply chain challenges to labor shortages and rising labor costs, contractors are encountering new obstacles that can adversely impact on-time performance and their overall competitiveness and profitability. As projects continue to grow in size, scale, and complexity, these pressures will only intensify.

While prefab solutions have existed for decades, general and specialty trade contractors are increasingly using them to optimize labor performance and cost.

They have proven to reduce costs, boost productivity, maximize skilled labor, and help contractors expand into new geographies to grow their business. As prefab capabilities continue to grow, contractors should consider whether these solutions could drive their business forward.

P

Sean R. Nacey is senior vice president and general manager, U.S. Construction and Energy Solutions, Wesco.

© 20

March 2024 • www.ecmweb.com

2403ECM_30-33_Prefab.indd 32

H

3/12/2024 11:22:25 AM

2403EC

ECONOMICAL • INTERLOCKING

GANGABLE

FLOOR BOX

FOR NEW CONCRETE FLOORS

N E WRS! E

COV

with FLIP LIDS

PLATED, PLASTIC or POWDER-COATED (1) FLBC8530BL Black plastic cover/frame kit (3) FLBC8500 boxes

HERE’S HOW IT WORKS...

FLBC8500 Single gang box

FLBC8500

Co Connections on sides lock single gang FLBC8500 boxes securely together

C STIListed Cover/frame kits

PLA

NOW IN PLASTIC, FIVE Colors!

Black

Black

Gray Brown

Light

Brown

Almond Light Almond

Gray

Reposition hinge.

It’s Easy!

Lock two boxess together for a two-gang box.

Add another for three-gang!

Remove cover R

Build a two- or three-gang concrete floor box by simply locking single gang boxes together!

Then buy the UL LISTED single, two- or three-gang cover/frame kit, with devices included, in PLASTIC, FIVE COLORS – or in economical diecast zinc with a brass or nickel finish.

Fast, easy installation.

Caramel

Caramel

Covers open in Both Directions

Rotate. Reinstall.

Cover installs with hinge on either side.

FLBC8510BR

Made in USA Plastic Cover/frame Kit Single gang FLBC8510BR Brown FLBC8510BL Black FLBC8510GY Gray FLBC8510CA Caramel FLBC8510LA Lt Almond

66

Metal Cover/frame Kit Brass finish Single gang FLBC8510MB Two-gang FLBC8520MB Three-gang FLBC8530MB

Two-gang

Three-gang

FLBC8520BR Brown FLBC8520BL Black FLBC8520GY Gray FLBC8520CA Caramel FLBC8520LA Lt Almond

FLBC8530BR Brown FLBC8530BL Black FLBC8530GY Gray FLBC8530CA Caramel FLBC8530LA Lt Almond

Nickel finish Single gang FLBC8510NL Two-gang FLBC8520NL Three-gang FLBC8530NL

www.aifittings.com Scranton, PA 18517 800/233-4717 © 2017 REV 2022 Arlington Industries, Inc.

2403ECM_Arlington_907011-0324_66.indd 1 2403ECM_30-33_Prefab.indd 33

FLBC8530MB

FLBC8520NL

Patented

Product Info aifittings.com/landing/gangable-box-kits/

2/19/24 3:41 3/12/2024 11:22:25 AMPM

Photo 211844876 © Sofiia Shunkina | Dreamstime.com

Construction Labor Productivity: The $20 Billion Opportunity FMI’s 2023 labor productivity study offers an inside look at why contractors who establish sound operating processes perform better than their peers.

By Michael Keller, Tyler Pare, and Jake Howlett, FMI

C

onstruction is a labor-intensive business.

Despite tremendous advances in design, coordination, and management technologies, the physical installation of work in the field remains reliant on people. Of the nearly $900 billion in construction put in place by laborintensive contractors in the United States in 2022, FMI research suggests contractors lost approximately $30 billion to $40 billion due to labor inefficiencies. At the individual 34

contractor level, these labor productivity deficits translate to project and enterprise margin erosion.

Labor productivity is a challenge for the construction industry, and it appears to be getting worse. FMI’s 2023 Labor Productivity Study confirms the well-documented trend of productivity decline, with only 23% of respondents claiming labor productivity improvements over the last 12 to 18 months. Almost half of respondents (45%) saw declining labor productivity, and a third saw stable labor productivity trends in their businesses.

March 2024 • www.ecmweb.com

2403ECM_34-41_FMI_Labor_Report.indd 34

3/12/2024 11:45:45 AM

ARLINGTON STEEL BOX WITH BRASS COVER

LISTED SINGLE GANG

FLOOR BOX KITS CONVENIENT, FLUSH-TO-THE-FLOOR RECEPTACLE INSTALLATION Arlington’s STEEL FLOOR BOX KITS give installers a low cost, convenient way to install a receptacle in a new or existing floor.

© 2016 Arlington Industries, Inc.

FLB5331NL Single gang steel box kit w nickel-plated brass cover

Our Listed Single Gang Steel Floor Boxes deliver easy, flush-to-the-floor installation.

• Brass covers hide miscut flooring; gaskets prevent water intrusion; flip lids protect the box when it’s not in use.

• Single gang brass and nickel-plated Brass Covers fit our boxes and other manufacturers’ single gang boxes.

Covers also sold separately.

FLB5331MB Single gang steel box kit w brass cover

for NEW or existing floors

FLB5331MB Single gang Kit w brass cover

119

800/233-4717 • www.aifittings.com

Product info aifittings.com/landing/flb5331-flb5551-kits

2312ECM_Arlington_866439-1223_119.indd 1 Patented/other patents pending

11/14/23 1:58 PM

IN BOX RECESSED COVER KITS ®

!

EW

N

INSTALLS INSIDE 4.5" CONCRETE BOXES

Arlington’s IN BOX® Recessed Cover Kits are the neat way to install a receptacle in an installed 4.5" concrete floor box, including our FLBC4500 or FLBC4502 boxes.

FLBC4560DNL

Plugs stay inside recessed cover

IN BOX covers install fast, inside the can reducing trip hazards caused by plugs sticking out of the box. They look great.

And, you can have power and low voltage in the same box.

Assembled IN BOX, comes with matching in-use slotted cover and cover blank for unused boxes in brass or nickel-plated brass

Slotted in-use cover

FLBC4560DMB Brass

FLBC4560DNL Nickel-plated

Cover blank

Slotted cover

© 2018 Arlington Industries, Inc.

FLBC4560DBR Brown

...and plastic in FIVE colors.

FLBC4560DMB FLBC4500 FLOOR BOX FOR NEW CONCRETE

57

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866440-1223_57.indd 1 2403ECM_34-41_FMI_Labor_Report.indd 35

Easy to install in concrete box

FLBC4560DGY FLBC4560DCA Gray FLBC4560DBL Caramel Black

Product info aifittings.com/landing/inbox-cover-kits/

FLBC4560DLA Light almond

Patented

11/14/23 2:11 PM 3/12/2024 11:45:47 AM

S What Top-Performing Companies Do Right 1. Pre-job planning: This requires consistent and thorough translation of project information from estimating to operations, followed by in-depth planning by project teams to develop strategies for optimizing labor productivity and project performance.

2. Look-ahead planning: This needs a weekly cadence of field leaders communicating resource needs (labor, equipment, materials, subcontractors, and information) for upcoming activities to be coordinated and supported by project management.

3. Daily goal setting: Field leaders establish and communicate clear, quantifiable production expectations and objectives for crews daily.

4. Labor productivity tracking and feedback: Field leaders and project teams need regular reporting of productivity information in digestible formats so they can discuss project performance and detect labor risk early. This requires well-vetted budgets with hours and quantities before mobilization, accurate reporting of time and quantities by field leaders throughout the project, and reinforcement of the right behaviors.

PQ Newsbeat If you’re an engineer, commercial or industrial facility manager, or electric utility employee concerned about the quality and reliability of power delivery, this e-news-letter (sent out monthly) is for you.

5. Cost-to-complete forecasting: This critical report is based on a monthly analysis of the costs incurred to date, the percentage of the job that is completed, accurate forecasting, and re-estimating the cost to complete the remainder of the scope of work. Accuracy of the cost-to-complete forecast increases with up-to-date direct cost accounting, early buyout and locked-in pricing, field input on the remaining work and accurate productivity tracking that can be utilized to project labor costs.

Topics covered include: • Power quality and harmonics

6. Exit strategy: During this phase, the project team meets to re-energize, focus, and develop a plan to finish a project on time and mitigate the risk of late project margin fade. This would typically occur when the project is near 80% completion.

• Troubleshooting techniques • New products and services

Subscribe Today See all of our EC&M e-newsletters at www.ecmweb.com

36

ECM-ads.indd 5

7. Post-job review: After project closeout, this meeting shares and documents the lessons learned, provides production feedback to estimating, and captures trends for future success and continuous organizational improvement.

The study explores the major challenges that must be addressed to improve productivity for the industry, including both internal and external obstacles that contractors face in their pursuit of performance optimization. Additionally, FMI identifies key management practices and traits of high-performing contractors, including planning behaviors, project controls and support for the field. To produce these findings, FMI surveyed more than 250 senior leaders from laborintensive, self-performing contractors in the summer of 2023 to understand productivity challenges and best practices.

PRODUCTIVITY DRIVES PROFITABILITY

Contractors believe 11% to 15% of field labor costs are wasted or unproductive.

Although it is unfair to expect contractors to reduce their waste or unproductive time to zero, respondents conservatively believe that 6% to 10% of labor spending ($15 billion to $25 billion) could be saved through better management practices.

In 2012, 57% of those surveyed by FMI said productivity had slightly or significantly improved. By 2023, that figure fell to 23% (Fig. 1 on page 38). Similarly, in 2012, only 25% said productivity had

March 2024 • www.ecmweb.com 3/30/18 7:04 PM

2403ECM_34-41_FMI_Labor_Report.indd 36

3/12/2024 11:45:48 AM

2403EC

SNAP2IT® CONNECTORS E AS IE ST C AB LE I NSERTI ON • N O TOOLS • S E CURE H O L D

17

SAVE

seconds

4010AST 1/2” KO

4110ST

5010AST

LISTED SNAP2IT ® CONNECTORS FOR

NEW MC-PCS CABLE ...lighting & low voltage circuits in the same cable

1/2" KO

Easy to Snap into Box!

505010AST 3/4" KO

Fully assembled, SNAP2IT® fittings handle the widest variety of MC cable AND THE NEW MC-PCS cables.

Compared to fittings with a locknut and screw, you can’t beat these snap in connectors for time-savings!

9

• Fits widest range and variety of MC cable 14/2 to 3/3 AC, MC, HCF, MC continuous corrugated aluminum cable and MCI-A cables (steel and aluminum)...including the new MC-PCS cable that combines power and low voltage in the same MC cable ANY Snap2It Connectors LISTED for MC cable are also LISTED for MC-PCS cable! These products offer the greatest time-savings.

• Fast, secure snap-on installation • Easy to remove, reusable connector From cable Loosen screw on top. Remove connector from cable.

From box Slip screwdriver under notch in Snap-Tite® ring. Twist.

Remove connector.

CATALOG NUMBER

Snap2It® connectors

DESCRIPTION

CABLE OUTSIDE DIA (OD)

4010AST

Snap in, 1/2" KO w insulated throat

.405 to .610

5010AST

Snap in, 1/2" KO w insulated throat

.580 to .780

505010AST

Duplex Snap in, 3/4" KO w insulated throat

(2) .590 to .820

4110ST

Snap in, 1/2" KO

.525 to .705

414110ST

Duplex Snap in, 1/2" KO

(2) .525 to .640

4141107ST

Duplex Snap in, 3/4" KO

(2) .525 to .690

4141107ST

Patented. Other patents pending.

www.aifittings.com • Scranton, PA 18517 • 800/233-4717

© 2015 Arlington Industries, Inc.

Product info aifittings.com/landing/snap2it-mc-cable-connectors

2403ECM_Arlington_907016-0324_9.indd 2403ECM_34-41_FMI_Labor_Report.indd 37 1

2/19/24 3:38 3/12/2024 11:45:49 AMPM

S

Fig. 1. The productivity trend moved from positive to negative over the past decade.

Fig. 2. Contractors with fewer labor cost overruns tend to have higher operating profit margins (OPMs).

Fig. 3. Field manager preparedness as an indicator of OPM.

slightly or significantly declined, and by 2023 that figure increased to 45%.

Humans are the biggest driver of putting work in place, so it’s no surprise

that many of the top challenges (either internal or external) uncovered in the survey were directly related to people.

First and foremost is finding skilled

Fig. 4. Duration of look-ahead planning and correlation with frequency of emergency needs.

workers, especially in the field. As FMI’s 2023 Talent Study revealed, 93% of firms can’t find the workers they need, with the biggest gap in talent associated with field leadership.

The labor productivity study backs that up with 63% of respondents citing lack of qualified craft labor as the No. 1 internal factor impacting productivity.

After a lack of labor, contractors said their top internal struggles were associated with poor planning and communication by field management and project management as well as subpar project team collaboration and site logistics.

HOW TO SOLVE THE LABOR PRODUCTIVITY PROBLEM

Here are a few factors that are within a contractor’s control to influence the outcome with it comes to job-site efficiency.

©

38

March 2024 • www.ecmweb.com

2403ECM_34-41_FMI_Labor_Report.indd 38

3/12/2024 11:45:54 AM

2403ECM

NO TOOLS! • EASY CAB LE I NSERTION

Snap2it 90°connectorS ®

WITH and WITHOUT INSULATED THROAT FAST, EASY REMOVE CLIP to REMOVE CABLE 38900AST

4010900AST

40900ST

• Easy snap-in cable installation Save time

EASY TO INSTALL

over 90° 2-screw MC Connectors at same cost per connector

1 BEND CABLE FOR EASY INSERTION 2 INSERT CABLE INTO FITTING

• Handles widest range & variety of cables: 14/2 to 10/2 AC, MC, HCF, MC continuous corrugated aluminum cable, MCI-A cables (steel & aluminum), AC90 and ACG90 0

3 SNAP ASSEMBLY INTO BOX (SEE ABOVE)

2 1

Flexible Metal Conduit Steel & Aluminum (RWFMC)

per connector over 2-screw styles

• Easy to remove from box...reusable 38900AST 38900ST Dia. Range

Cable Range

14/2, and 12/2 with & w/o .440 to ground.

MCI-A Steel & Aluminum .550 14/3, 14/4 12/3, 12/4 AC90, ACG90 10/2

MC/HCF/AC Steel & Aluminum

1 MINUTE

• Fast, secure installation...No pullout

90° SNAP2IT® CABLE RANGES

CABLE TYPE

SAVE

.380 to .600

4010900AST 40900ST Dia. Range

Cable Range

with and without insulated throat

.490 to .600

14/3, 12/2, and 12/3 with & w/o .480 to ground. .550 14/4 .480 to 12/4 .550 10/2

6

3/8" Flex* *CSA Listed w anti-short bushing ONLY

Patented © 2015 Arlington Industries Inc.

2403ECM_Arlington_907017-0324_6_rev.indd 2403ECM_34-41_FMI_Labor_Report.indd 39 1

www.aifittings.com Scranton, PA 18517 800/233-4717 Product Info aifittings.com/landing/ 90-degree-connectors/

3/12/24 3/12/24 2:44 2:50 PM PM

Project labor budget performance Contractors are in the labor-management business, and understanding labor costs has a clear, direct effect on profitability. One of the ways FMI assesses the overall efficiency of labor-intensive contractors is how regularly they meet or beat estimated labor budgets.

When projects overrun on labor budgets, project margins suffer. If project labor overruns are a common occurrence, enterprise profitability suffers. This obvious connection between labor performance and profitability is confirmed through contractor feedback in the study. Those firms with fewer labor overruns tend to be more profitable.

Avoiding labor overruns on a singular project can be managed by experienced project and field leadership. However, avoiding labor overruns at scale across a large number of projects requires organizational standards for proactive planning and project controls (Fig. 2 on page 38).

Planning is critical Projects that fall behind early rarely make miraculous recoveries. The discipline of in-depth, collaborative field and office planning before mobilization (pre-job planning) is one of the greatest influences on labor productivity.

FMI’s data shows that the earlier field leaders are involved — and the better prepared they are before mobilization — the higher the profit margins. The percentage of contractors with operating profit margins (OPMs) greater than 4% steadily Made to order polymer composite

HOUSEKEEPING PADS

Outperforms traditional concrete

Quick Installation

Flexible Designs

no waiting for concrete to cure

built to exact size specifications including conduit openings

Labor Saving

Built to Last

no forms or pouring field materials

corrosion resistant and extremely durable (seismic ready)

Mounting stainless steel inserts for equipment and floor anchors

with limited colors available

basetek.com | info@basetek.com | 877.712.2273 Built to last and outperform. We guarantee it.

40

Cost-to-complete forecasting In addition to field leader preparedness and detailed look-ahead planning, the accuracy of cost-to-complete (CTC) forecasting correlates with higher profit margins. Cost forecasting discipline is a key marker of contractor maturity and sophistication. Contractors that can accurately forecast their costs know where their projects stand and what it will take to finish the job.

That level of confidence requires accurate tracking of installed quantities and labor hours from the field, reliable cost reporting, and strong communication between field managers and project managers.

BUILDING A BETTER FUTURE

Not surprisingly, 70% of contractors in the study highlighted improving planning and execution practices as their top priority for adjusting operations over the next 18 months. For best practices on what top-performing companies do right, see “What Top-Performing Companies Do Right” on page 36. Additionally, leadership training and development was the second-highest priority listed.

Contractors that establish sound operating processes and train their people to be successful in their systems perform better than their peers. This takes significant time and discipline. If done well, however, it can have a significant impact on the bottom line and improve employee engagement and retention.

By getting a handle on productivity, giving workers the tools needed to be successful and diligently planning for jobs, companies can improve margins and profitability. In an industry where one bad job can make or break a company, harnessing the power of your biggest asset — your people — will ensure you continue to successfully operate and thrive.

Michael Keller focuses on providing expert guidance on strategic planning, productivity, and operational excellence at FMI. He can be reached at michael.keller@fmicorp.com.

Tyler Paré leads FMI’s performance practice, which helps contractors optimize profitability and manage risks. He can be reached at tyler.pare@fmicorp.com.

Precast

©2023 BaseTek, LLC., Zanite Plus is a registered trademark of BaseTek LLC.

increases along with their field teams’ levels of readiness (Fig. 3 on page 38). However, field managers who shoulder the stress of on-site execution are particularly susceptible to burnout. FMI research found that executives expect 30% turnover for field managers over the next five years, which means that keeping staff engaged and providing the right support will be crucial.

In Fig. 4 on page 38, the study compares the duration of look-ahead planning and how frequently field managers have resource emergencies. Results show that the further out contractors plan, the fewer emergency events they have every week. Of the contractors that do minimal planning, 83% have resource emergencies multiple times a week, while only 15% of contractors that plan for three weeks or beyond have resource emergencies multiple times a week.

Jake Howlett is an analyst in FMI’s performance practice where he focuses on facilitating data analytics processes for client deliverables and internal projects. He can be reached at jake. howlett@fmicorp.com.

March 2024 • www.ecmweb.com

2403ECM_BaseTek.indd 1

2403ECM_34-41_FMI_Labor_Report.indd 40

1/29/24 8:46 AM

3/12/2024 1:56:06 PM

ARLINGTON POWER & LOW VOLTAGE

LOWEST COST • L-SHA PED

FAN/FIXTURE BOX

COMBO BOX FOR RETROFIT PROJECTS

UL rated fans up to 70 lbs; fixtures to 200 lbs.

This convenient combo box has power and low voltage openings in the same box for a neat, time-saving installation.

The box adjusts to fit wall thicknesses from 1/4" to 1-1/2".

Mounting wing screws hold it securely in place.

LVDR2

• 2-Hour Fire Rating

• Includes NM cable connector (power side)

No loose parts! Installation screws ship captive, ready to install box and bracket.

© 2013 Arlington Industries, Inc.

Installed NM cable connector

• Low voltage side has a combo 1/2" and 3/4" KO for raceway

Super-secure installation!

Our lowest cost, L-shaped fan/fixture box mounts to single or double joists with a captive center screw.

Product info aifittings.com/ landing/ combo-boxes

84

800/233-4717 • www.aifittings.com

36

FB442 13.4 cu. inch

• For 1/2" or 5/8" drywall • Fast, easy installation • Locator posts assure proper positioning of fan/fixture bracket

• 2-hour Fire Rating Product info aifittings.com/landing/joist-mount-fan-fixture-box 800/233-4717 • www.aifittings.com

© 2001-2016 Arlington Industries, Inc.

Patented

SECURE MOUNTING TO SINGLE, DOUBLE JOISTS

NON-METALLIC 2312ECM_Arlington_866407-1223_84.indd 1

11/14/23 2402ECM_Arlington_902126-0224_36.indd 10:48 AM 1

NEW

ice

© 2009 REV 2015 Arlington Industries, Inc.

Dev Entry h s w Bru g openin

THE SCOOP

1/23/24 4:34 PM

TM

ENTRANCE PLATES, HOODS, DEVICES E The SCOOP™ series of reversible, non-metallic ENTRANCE HOODS, PLATES AND DEVICES protect cable while delivering good looks and installation versatility. They also reduce labor and eliminate extra connections.

Our newest CABLE ENTRY DEVICES come with or without a wall plate for efficient cable management.

HOODS for decorator-style wall plates, single and two-gang PLATES install facing in or out...and save time!

CED135 Arlington’s TVBU505 TV BOX

19

(with wall plate, order CED135WP)

CED1 facing OUT

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866400-1223_19.indd 1 2403ECM_34-41_FMI_Labor_Report.indd 41

• Low voltage cable protection • Best way to run cable

CER1

CE1 facing IN

CED130

entry device w slotted cover

CE2 facing OUT

Product info aifittings.com/landing/scoop-series/

Patented

11/14/23 11:16 AM 3/12/2024 11:45:57 AM

By Kenny Ingram, IFS

Restructuring Construction Industry Productivity

H

igh inflation and labor shortages are a major challenge for many industries, and no more so than in the construction and engineering (C&E) sector, where productivity has historically always been low. C&E firms can improve project efficiency by increasing productivity, lowering costs, and reducing waste. And it’s not all just about tackling labor issues — that’s just one interrelated issue.

The construction industry has lagged the manufacturing industry in terms of productivity gains in recent decades.

This is due to several factors, including fixed and repeatable processes, the use of automation, and standardized materials that are common in manufacturing but not in construction.

By their very nature, construction projects are often unique and complex, making it difficult to develop standardized processes and automate tasks. The industry is also highly fragmented, with many small- and medium-sized businesses, which can make it difficult to implement industry-wide initiatives to improve productivity. And if that wasn’t enough, two additional issues must be factored in. The construction industry faces a shortage of skilled workers and is often subject to weather delays, which can disrupt schedules and impact productivity.

According to metrics from the Becker Friedman Institute for Economics at the University of Chicago, “The productivity struggle within the construction sector is real, and not a result of measurement error. Given its place in the economy, this productivity decline has real effects: Had construction labor productivity grown over the last five decades at the (relatively modest) rate of 1% per year, annual aggregate 42

Photo 75220101 © Rafael Ben Ari | Dreamstime.com

It’s beyond a labor issue.

labor productivity growth would have been roughly 0.18% higher, resulting in about 10% higher aggregate labor productivity (and, plausibly, income per capita) today.”

WORKING SMARTER — AWAY FROM THE CONSTRUCTION SITE

There are certainly lessons to be learned from the manufacturing industry here. A strong industrialized construction trend in the industry is evidence that electrical contractors and clients see benefits in adopting new ways of working. Modular and prefabrication strategies are certainly increasing, and there is a trend toward doing less work on the construction site and more work off site in production or supply hub locations.

Modular work can be performed more efficiently, at a lower cost, and at a higher quality. Shop environments

let the same number of people perform more work, so as the aging skilled workforce retires, modular will be attractive for human capital management purposes. It’s no wonder more contractors, house builders, and engineering firms are pushing the use of shop-based construction, and more project owners are seeing the value.

BOTTLENECK IS NOT ALWAYS THE LABOR POOL

If you consider where the cost comes from in a construction project, it is typically dominated by four types of costs: labor, material, subcontractor, and equipment, such as cranes, excavators, etc.

There is a tendency to focus on labor productivity, but for some, labor costs can be as little as 10% of the project costs.

Therefore, depending on the project, it may not necessarily be the right area to

March 2024 • www.ecmweb.com

2403ECM_42-45_IFS_Predictions.indd 42

3/12/2024 1:53:21 PM

ARLINGTON A NEAT COVER UP...

NON-METALLIC BOX COVER © 2002 Arlington Industries, Inc. REV 1118

Patented.

FOR UNUSED FAN/FIXTURE BOXES – FITS PAN BOXES TOO!

CP3540 Box Cover

Our non-metallic, paintable CP3540 Box Cover is the neatest way to cover unused fan/fixture boxes, pan boxes or poorly cut drywall.

Versatile bracket design with ‘A’ and ‘B’ openings for use on flat or uneven ceilings.

‘A’ for flat ceilings Push stud into opening to seat cover

Versatile Bracket Design

• No visible screws on ceiling plate

Easy installation. Attach the e bracket to the box with #8 or • Fits 3.5", 4" round #10 screws. Back the screws out enough or octagonal boxes to slip the bracket on.

20

800/233-4717 • www.aifittings.com

Stud

‘B’ for uneven or textured ceilings Thread stud into opening until tight

Product Info aifittings.com/landing/CP3540

2402ECM_Arlington_902122-0224_20.indd 1

1/23/24 2:43 PM

LOW COST • ZINC

MC CABLE FITTINGS NEW !

SIZE

3-1/2"

THAT FIT SEVERAL CABLE SIZES Save time and money! Arlington’s low cost MC cable fittings, for dry locations only, are super-convenient and cost-effective. End stop bushings vary the size of the opening so ONE trade size fits several cable sizes!

© 2008 REV0221 Arlington

Changing end stop bushings is fast and easy. No need to remove the strap.

Insert the bushing that works the best with the cables you’re installing.

Reduce inventory – Costs much less than steel and malleable iron fittings Built-in end stop

8418 for 1000 Mcm wire and TECK90 Catalog Number

Trade Size

Cable O.D. Min Max

Wire Bundle O.D. Min Max

Conductor size # of Conductors* (AWG/KCMIL)

8412

1"

.780

1.120

.660

1.000

6/3, 6/4, 4-3, 4-4, 2-3, 2-4, 1-3

8413

1-1/4"

1.000

1.460

.870

1.370

2-3, 2-4, 1-3, 1-4, 1/0-3, 1/0-4, 2/0-3, 2/0-4, 3/0-3

8414

1-1/2"

1.360

1.770

1.250

1.590

2/0-4, 3/0-3, 3/0-4, 4/0-3, 4/0-4, 250-3, 250-4

8415

2"

1.700

2.200

1.550

2.050

250-4, 300-4, 350-3, 350-4, 500-3

8416

2-1/2"

2.100

2.700

1.950

2.400

500-3, 500-4, 600-3, 600-4, 750-3

8417 8418

3" 3-1/2"

2.500 3.300

3.300 3.600

2.350 3.031

3.000 3.500

600-4, 750-3, 750-4 750-3, 750-4, 1000-4

NEW

* Examples of 3- and 4-conductor cables accommodated.

Patented

3-1/2" 8418

14

800/233-4717 www.aifittings.com

Product info aifittings.com/landing/8412

2312ECM_Arlington_866402-1223_14.indd 1 2403ECM_42-45_IFS_Predictions.indd 43

11/14/23 11:34 AM 3/12/2024 11:25:40 AM

Photo 145172957 © Aisyaqilumar | Dreamstime.com

prioritize. Let’s look at the composition of total project costs.

The make-up of the project costs will differ based on factors such as your role — are you a main/general contractor, a specialty contractor, or a material/ equipment supplier? Also, it matters whether you’re following a self-perform or subcontract construction model. This means that the focus on where to reduce costs will vary across different organizations and projects.

LOOKING AT THE BIG PICTURE

Perhaps the real answer lies in not focusing on these four resource types as four independent areas, but instead recognizing that minimizing project costs requires a synchronized approach. There are many reasons for poor productivity — from bad planning and scheduling, too many scope or design changes, inexperienced labor, bad weather, etc. So, there is a huge opportunity to improve and reduce costs here.

For example, when you measure labor productivity and witness workers standing around on a construction site not doing productive work, the obvious question comes up… why? In most cases, it is not their lack of knowledge, skill, or willingness to work hard that is the issue, but the fact that they are stopped because the other resources are not available — such as materials or equipment — or because they are waiting for another work package to finish before they can start or continue their 44

work. This is possibly the main reason why manufacturing work can be executed at a lower cost and with more reliable completion dates.

If you accept this argument, then the focus for the industry is to have integrated project and resource planning with structured work packages that can be planned and synchronized to eliminate waste and increase total resource productivity. This will also improve project delivery performance and increase project margins.

SUBCONTRACTORS ADD EXTRA LAYER OF COMPLEXITY

Most contractors deliver projects using a mix of self-perform and subcontract models. Subcontract packages must be efficiently managed. Stats from the National Association of Homebuilders show it takes 24 subcontractors (on average) to build a single home. Therefore, it’s critical to have effective business processes in place to ensure that the subcontractors deliver work on time and to a high quality.

Successful management of subcontractors relies on the collaboration of multiple key roles within a project, and the transparency of data, ensuring that the main contractor is working from a single source of truth. Any supporting construction software tool must provide a platform with one source of truth, where the data is real-world, live, accurate, and protected from manipulation — allowing contract and project

managers to evolve away from struggling to handle hundreds of different static Excel spreadsheets at any one time.

EQUIPMENT MANAGEMENT — SWEAT THE ASSETS

Now let’s look at the equipment — another place where project costs can be reduced is by improving their management of assets and equipment.

Most construction companies have equipment sitting idle for long periods, which means that the project is incurring unnecessary costs that directly hit the bottom line. Better planning and tracking of equipment can significantly reduce equipment costs.

Many construction and engineering companies operate multiple business units, some of which are not project-centric (e.g., service or facilities management to offer asset operations and maintenance services or an off-site manufacturing plant, or they may own equipment that they rent or hire to internal/external construction contractors).

For these business units, optimizing their resources is just as important to maximize business unit performance.

As an example, a maintenance service provider can significantly cut down costs by utilizing intelligent AI-based resource planning and scheduling software to plan and schedule work most efficiently. This smart AI technology can also be implemented in various types of businesses for similar benefits.

RESTRUCTURING CONSTRUCTION PRODUCTIVITY

In all of this, it is key to focus on reducing project costs in a synchronized manner.

This means looking at all the factors that contribute to costs. Labor is one, but materials, subcontractors, and equipment are three important pain points. By using integrated project and resource planning, construction companies can identify and eliminate wasted time/resources and improve overall productivity. By adopting new technologies and ways of working, the industry can ultimately become more efficient and profitable.

Kenny Ingram is the vice president of engineering, construction & infrastructure at IFS with specialization in construction, contracting, engineering, infrastructure, and shipbuilding.

March 2024 • www.ecmweb.com

2403ECM_42-45_IFS_Predictions.indd 44

3/12/2024 11:25:42 AM

2403EC

LISTED • LOOKS GREAT • SAVES TIME

ADJUSTABLE SLIDERBAR

™

NOW

WITH FLAT BRACKETS

SL24F fits 15"-24" spacing

Adjustable SLIDERBAR

SL18F fits 12"-18" spacing Patent pending

SAVES 20 MINUTES PER BOX

The NEAT Way to Mount Single or Two-gang Metal and Plastic Boxes

Here’s the easy way to mount single or two-gang boxes between wood or metal studs with non-standard stud cavities.

Arlington’s steel SliderBar™ looks great and saves about 20 minutes per box over cutting, nailing and placing extra 2x4s!

It’s available in two styles – with pre-bent brackets – or FLAT BRACKET ends. And in two adjustable sizes for studs spaced 12 to 18 inches – or 15 to 24 inches apart.

The extra convenient SliderBar with FLAT brackets comes with a steel mounting bracket for installing almost any metal box, and our plastic SLB101 and SLB102 boxes, on the bar anywhere in the stud cavity.

Use the SL18BKT mounting bracket.to add another metal box on FLAT SliderBar. Metal boxes mounted on SliderBar are rated for non-metallic and MC, AC and Flexible Metal Clad cable

• Guides on bracket ends assure proper positioning on studs • Interlocking tab stop prevents accidental disassembly • Pre-punched pilot holes on BOTH sides of SliderBar allow for easy attachment of boxes SL18F FLAT SLIDERBAR KIT Adjusts to fit between studs, 12" to 18" o.c.

SL24F FLAT SLIDERBAR KIT Adjusts to fit between studs, 15" to 24" o.c.

SL18F, SL24F include flat SliderBar, steel mounting bracket, (2) #8 x 1/2” screws SL18BKT Steel Mounting Bracket w mounting screws SLB101 PLASTIC BOX Single gang • pre-formed screw holes SLB102 PLASTIC BOX Two gang • pre-formed screw holes

91

www.aifittings.com Scranton, PA 18517 800/233-4717

© 2023 Arlington Industries, Inc.

Attach mounting bracket to box.

Bend SliderBar bracket ends 90°.

Bend ends again along guides to desired wall board thickness.

Slide box into SliderBar channel BEFORE bending bracket ends.

Product info aifittings.com/landing/sliderbar

2403ECM_Arlington_907023-0324_91.indd 1 2403ECM_42-45_IFS_Predictions.indd 45

2/19/24 3:54 3/12/2024 11:25:43 AMPM

As rental cars, trucks, buses, and other fleets increasingly go electric, charging infrastructure has emerged as a major roadblock.

Solar, BESS, and load management offer relief.

46

Library of Congress (copyright 1926)

The Electric Tortoise and the Fleet Hare

Photo 1. Henry Ford whispers into the ear of Thomas Edison. After meeting at a conference in 1896, the pair became lifelong friends. Could it be the two were discussing how their worlds would intersect?

H

By Tim Kridel, Freelance Writer

enry Ford and Thomas Edison were friends for half a century. When he’s making presentations about fleet electrification, Rajiv Singhal includes a slide with a photo of Ford whispering into Edison’s ear. “It’s like he’s saying, ‘Our two industries are going to intersect,’” says Singhal, who leads the zero emissions transportation team at 1898 & Co., Burns & McDonnell’s consultancy subsidiary. “And that’s what’s happening.

Transportation never spoke utilities, and utilities never spoke transportation — and now they have to speak those two languages. This picture (Photo 1) is from 1925 (almost exactly 100 years). Who would have thought this was going to happen?”

But these days, fleet electrification projects often feel like they’ll take another century to complete. Although the selection of electric delivery vans, terminal tractors, trailers, buses, rental cars, and trash trucks keeps growing, charging remains a significant roadblock — not just long charging times and the paucity of public chargers, but also the difficulty getting them installed at the business’ own facilities.

“Charging infrastructure may be one of the longest lead time components of our decarbonization plan for last-mile delivery vans,” says one executive, speaking on background, whose company currently has chargers at more than 100 of its depots nationwide.

Electrical contractors and design firms are turning this problem into a business opportunity by identifying ways around some of the roadblocks so projects can move forward rather than being shelved. In addition to helping clients, some firms also are extending this consultancy role to electric utilities for grid planning. In fact, one

March 2024 • www.ecmweb.com

2403ECM_46-51_Fleeting.indd 46

3/12/2024 11:55:11 AM

ARLINGTON ADJUSTABLE • NON-METALLIC • 2-HOUR FIRE RATING

IN/OUT BOX for Fans & Fixtures TM

EASY TO INSTALL... IN NEW CONSTRUCTION Arlington’s IN/OUT™ fan/fixture boxes adjust up to 1-1/2" to accommodate varying ceiling thicknesses, like single or double drywall. FBA426 is Listed for fans up to 70 lbs; fixtures up to 100 lbs.

NEW

• Pre-set for 1/2" ceiling – depth adjustment screw positions the box flush with the ceiling after it’s in place Bracket installation screws ship captive

© 2013 Arlington Industries, Inc.

FBA426 Adjustable Fan/Fixture Box 21.0 cu in

Underside

• Complies with 2020 NEC, 314.20 for set back boxes

2

• (4) screws attach box securely to joist in new work • 2-Hour Fire Rating

Patented 1 Cutaway: Box set back in double drywall

20.0 cu in FA426 6

2 Install ceiling.

If necessary use depth adjustment screw to position box flush with ceiling.

for Fixturess only up to 50 lbs

Depth adjustment screw

27

1

800/233-4717 • www.aifittings.com

Product info aifittings.com/landing/fba426

2312ECM_Arlington_866404-1223_27.indd 1

NO TOOLS • EASY SNAP-IN INSTALLATION • SAVES TIME!

11/16/23 3:50 PM

SNAP2IT® CONNECTORS FOR RETROFIT INSTALLATIONS Arlington’s new one-piece RETROFIT SNAP2IT® fittings are easy to use in an OLD WORK installation, and handle the widest variety of cables! They’re ideal for adding additional circuits to a load center. And you get the same labor-savings in a retrofit installation!

© 2014 Arlington Industries, Inc.

Easy snap-in installation - NO TOOLS. Install connector into the knockout in an existing box, pulling cable/conduit through the knockout. Slip the fitting onto the cable, then snap the assembly into the box. That’s it... a secure installation with no pullout.

Widest total cable ranges 14/2 to 10/3 Widest variety of cables AC, MC, HCF, MC continuous corrugated aluminum cable, MCI-A cables (steel and aluminum), AC90, ACG90 and FLEX

W!

NE

Snap connector onto installed MC cable.

40RAST

Snap assembly into box. Done!

8

38RAST

Patented

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866444-1223_8.indd 1 2403ECM_46-51_Fleeting.indd 47

Product info aifittings.com/landing/38rast-40rast/

11/14/23 2:25 PM 3/12/2024 11:55:11 AM

Photo Courtesy of Schneider Electric

CODE EVOLUTION AFFECTS OPTIONS

Photo 2. Electric utility-related challenges, such as grid constraints and demand pricing, have some fleet owners considering workarounds to keep their electrification plans on track.

common hurdle is whether the local electric utility can provide enough power to a site to charge dozens or hundreds of EVs. “Utility lead times continue to be one of biggest challenges facing this industry,” says Geri Waack, director of eMobility solutions at EnTech Solutions, a division of Faith Technologies Incorporated (FTI). “We’ve seen providers have power available almost immediately, while others have lead times of 18 months or more.”

In some cases, the necessary infrastructure isn’t in place because the client’s facility is in a remote area, such as a sprawling new logistics park on the outskirts of town where land is cheaper.

Closer in, the nearby substations and lines often are maxed out.

“I’ve heard places where they’re saying it can be three years before they get a connection,” Singhal says.

ALTERNATIVES TO AN ALTERNATIVE

Electric utility-related challenges, such as grid constraints and demand pricing, have some fleet owners considering workarounds to keep their electrification plans on track (Photo 2). Later, some of these short-term solutions can be expanded and upgraded for the long haul if they make good business sense.

“Alternative energy options, such as solar, battery energy storage, and microgrids, allow clients to offset utility demand and pricing, as well as create grid independence,” Waack says.

48

Lenexa, Kan.-based Henderson Engineers currently has two projects where the required amount of power is several miles away.

“They’re having to bring in new utility lines that far to supply the load,” says Clif Orcutt, electrical technical manager.

“So, we are considering doing some onsite battery storage for other reasons, as well, one of which is to offset the utility peak demand. It’s not enough to totally account for all the EV charging, but the owner can expand on that later if they decide that it’s worth the investment.”

One deciding factor is how many EVs need to be charged.

“Solar does not cut the [utility] bill because, depending on the fleet size at that given site, it may not be enough solar to fulfill that demand,” says 1898 & Co.’s Singhal. “Battery storage is expensive. It’s good for peak shaving. But if you have to run an operation for, say, eight hours, batteries will be very expensive.”

Even for major businesses, a battery energy storage system (BESS) capable of charging dozens of vehicles can be cost prohibitive.

“From what I’ve seen, the installed cost is about $1 million for a megawatt,” Orcutt says. “That is definitely a barrier to entry, and that’s not including the cost of the solar panels to charge those batteries. PV [photovoltaic] has been around for a while, and batteries have too. But specifically in this application, batteries are the newer technology — so it’s tough to get a price on those at this size.”

The National Electrical Code (NEC) provides guidance about sizing a system.

“It’s a rather straightforward calculation: however many [chargers] you need times the load of the charger, and that’s what the Code is going to make you do,” Orcutt says. “You have to take 125% of that because, in some cases, it’s considered a continuous load — meaning it goes longer than three hours.”

The Code is evolving in ways that affect fleet electrification, but opinions vary about whether those changes help or hurt.

“If anything, the Code has gotten more stringent about EV charging instead of more accommodating,” says EnTech’s Waack. Some changes worth noting include the following: • Section 625.42: Elaboration on charger management software and engineers’ ability to downsize services and feeders if it is used.

• Section 625.44(B): Expanded allowable amperages for mobile chargers.

• Section 625.49: Allows “island mode” where EV chargers are allowed to export power and operate off-grid.

• Section 625.54: Requiring GFCI protection on receptacles used for EV charging; leads to more expensive but safer installations.

Others say Code changes are providing flexibility that could make some projects viable.

“The latest NEC is starting to build in compliance methods that include a load management system,” Orcutt says.

“Basically, a control system says: ‘We’ll never charge more than X.’ If there are too many chargers plugged in at once to do all of that load at 100%, either they stagger some on or off, or they reduce charging on all of them.”

Some systems can provide additional flexibility by managing other electrical devices around a facility rather than just the chargers. For example, if a garage door opener isn’t in use, the allotted amperage load for that device can be redirected to the charging station. When someone needs the garage door to open, the control system will respond by decreasing the power flowing to the charging station.

Sometimes, load management systems can make one location more viable than others (Photo 3 on page 50).

“The client may come to you with six sites they’re considering,” Orcutt

S

w

o

o

©

March 2024 • www.ecmweb.com

2403ECM_46-51_Fleeting.indd 48

3/12/2024 11:55:13 AM

2403EC

S T EEL

2

Snap it connectorS NO TOOLS S

®

NEW!

ONE-PIECE

E EASY SNAP IN INSTALLATION

TINTED 40STSC

ALL STEEL

38STSC

FREE

COOLER Arlington’s new, one-piece Snap2It® steel connectors offer easy, secure installation. And save time! Just push the cable into the connector and rotate the connector clockwise.

with Purchase

Available in 3/8" trade size, both connectors install into a 1/2" knockout, and are Listed for steel and aluminum AC, HCF, MCI and MCI-A cable.

of TWO 200-piece boxes of 38STSC OR 40STSC SNAP2IT Connectors!

The tinted 40STS has more room inside for easier cable insertion.

In Canada both connectors are Listed for use with AC90 and ACG90 cable.

• Tested to UL 514B and Listed to meet UL ground fault requirements • Removable Unscrew the connector counterclockwise to remove it from the cable. Remove the connector from the box using a flat blade screw driver. Release the snap tangs from the inside of the box while pulling the connector out of the knockout.

• Packed in heavy-duty, 200-piece boxes

75

CATALOG NUMBER 38STSC

YEARS

Easy Snap-in Insertion

Easy Screwdriver Removal NO SPECIAL TOOL

Patented. Other patents pending. © 2023 Arlington Industries, Inc.

2403ECM_Arlington_907026-0324_122A_Rev.indd 1 2403ECM_46-51_Fleeting.indd 49

AC, HCF, MCI, MC!-A 14/2 w ground, 14/3, 14/2 12/2 w ground, 12/3, 12/2 • 10/2 w ground, 10/3, 10/2

.405” Dia. Minimum to .605” Dia. Maximum 40STSC Tinted

INNOVATION

CABLE RANGES STEEL Snap2It® connectors

AC, HCF, MCI, MC!-A 12/2 w ground, 12/3, 12/2 • 10/2 w ground, 10/3, 10/2

.480” Dia. Minimum to .605” Dia. Maximum

www.aifittings.com • 800/233-4717 Scranton, PA 18517 Product info aifittings.com/landing/38STS-40STS

122 A

3/12/24 11:39 AM 3/12/2024 11:55:14 AM

says. “We do a study to tell them for each, here’s what the utility can handle at this time frame, and here’s how we can bring in load management technology to maybe make this site work in the short term rather than years.”

The larger the load, the more likely the project will require a dry utility consultant, which works to ensure that all the necessary utility infrastructure and capacity are ready to go.

“A dry utility consultant knows the [local] utility requirements in and out,” Orcutt says. “We coordinate through them with the utility. It’s more prevalent on the West Coast from what I’ve seen, mainly because those utilities have a lot more strict requirements. It’s kind of almost a specialty.”

This process can include striking a balance between supply and demand.

“We can have discussions with utilities on how the business plans on charging their vehicles on a schedule, let’s say, and how that interacts then with the other electric loads happening on the grid at that same time,” Orcutt says. “There can be an agreement that gets made there as far as the capacity of equipment and power delivered to the site. Instead of looking at just one block [of time or] peak demand number, you’re looking at more of the energy profile through a day and/or through a year.”

THE RANGE FACTOR

Each type of fleet has its own business drivers for electrification, but some apply across the board.

“From a cost and operational standpoint, fleet operators are motivated by the potential for long-term cost savings on fuel, maintenance, and operational expenses, as well as increased operational efficiency due to their quiet operation, reduced maintenance needs, and improved efficiency in stop-and-go traffic,” says Jeffrey Kinsey, vice president of engineering at EverCharge. “EVs are also becoming more accessible and available, and government incentives, tax credits, and grants for EV adoption are also playing a role in encouraging fleet electrification.”

Some types of vehicles are better candidates for electrification than others because of how and where they’re used.

For example, terminal tractors move trailers around a seaport or logistics park but never take them across town or across the county. So a transportation 50

RENTAL RIPPLES INTO RESIDENTIAL

Photo Courtesy of EverCharge

Photo 3. Sometimes, load management systems can make one location more viable than others.

company might choose to electrify its terminal tractors first because they’ll always have access to chargers on site.

The business case for local delivery vans and long-haul trucks is more challenging. At a November 2023 conference, J.B. Hunt Vice President and Chief Sustainability Officer Craig Harper summarized the pros and cons.

“We have five today, and drivers love them,” he said. “They are quiet and powerful, but there are problems. You don’t have the range; that is one-fifth of what diesel provides. It also weighs more, and it takes longer to charge.”

Harper also cited research showing that 21% of public charging stations are down at any given time — a big barrier to adoption that gets even bigger when you consider that there aren’t that many to begin with. As an October 2023 EC&M story found, major truck stop operators such as Love’s are struggling with many of the same challenges as their customers: getting enough power and demand charging. That’s why some truck stop operators are considering solar and BESSs. Another barrier to the electrification of long-haul trucks is that truck parking is in chronically short supply. That’s why so many drivers resort to camping out on highway on and off ramps when they reach their federal hours-of-service limit.

“A big portion of today’s truck parking network — about 40,000 spaces — is at rest areas on the interstate where commercial activity isn’t allowed,” says Jeffrey Short, American Transportation Research Institute (ATRI) vice president. “That’s a federal law, so there aren’t going to be chargers at those locations anytime soon.”

Electrification in the passenger vehicle market is further along in terms of selection, adoption, and public chargers, but it’s still a niche compared to internal combustion engines (ICEs). That could give rental fleets another reason to add even more EVs — and benefit electrical contractors serving the residential market. For example, in November 2021, Hertz ordered 100,000 Teslas to make 20% of its fleet electric. However, in more recent news, Hertz announced it was selling about 20,000 electric vehicles (including Teslas) from its U.S. fleet as EV demand cools.

“Data from IHS that says that people have a tendency to rent cars to try new technology, so it makes sense that rental cars should be electric,” says Ben Prochazka, executive director at Electrification Coalition, which partnered with Enterprise on a study into the EV rental market.

The rental electrification trend also could spur even more demand for home chargers.

“Rentals tend to be big volume sellers in the used car market,” Prochazka says.

“That creates an opportunity for used EVs to be much more available.”

Besides growing consumer interest in renting EVs, another driver is government incentives for fleet owners.

“In the Inflation Reduction Act, there are big incentives for charging infrastructure: up to $100,000 available on a per-unit basis,” Prochazka says. “That’s going to help reduce some of those cost barriers that might exist in the short term. Some states have additional infrastructure incentives or additional vehicle incentives, like in California, where they have an additional tax credit that’s available. Colorado [is another] example.”

Finally, some electrical contractors and design firms are leveraging their fleet electrification experience to help utilities plan grid upgrades that need to accommodate more than home charging.

“Lots of utilities are asking us today: ‘Tell me about this new EV load and how/what can I do to prepare myself. I need to build the rate case plan. I need to put [in] infrastructure for the next five, 10, 15, 20 years,’” says 1898 & Co.’s Singhal.

Kridel is an independent analyst and freelance writer with experience in covering technology, telecommunications, and more.

He can be reached at tim@timkridel.com.

March 2024 • www.ecmweb.com

2403ECM_46-51_Fleeting.indd 50

3/12/2024 11:55:15 AM

ARLINGTON NOW IN THREE COVER SIZES • NON-METALLIC

HOLE COVER KITS RATED FOR 250 LBS

ENSURES COMPLIANCE WITH OSHA Arlington’s non-metallic hole cover kits offer the fastest way to cover a hole – and ensure compliance with OSHA safety standards on a multi-story building site.

Available in three sizes, our hole cover kits come with retaining clips that adjust to fit a range of hole sizes.

Retaining clips

• Reference scale for precise sizing to hole diameter • Complies with OSHA Standard 1910.28 (b) (3) (i) (A)

© 2021 Arlington Industries, Inc.

NEW

" 10.5eter diam3792

• Rated for 250 lb load (top view)

HC

(back)

HC1742 fits 1-3/4" to 4-1/4" opening, HC1762 1-3/4" to 6-1/4” hole HC3792 3-3/4” to 9-1/4” hole

HC1742

73

HC1762 Patent pending

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866437-1223_73.indd 1

NEW

HC1742 clips set for 1-3/4" hole

HC1762 set for 6" hole

Product info aifittings.com/landing/hole-cover-kits

11/14/23 1:46 PM

GALVANIZED STEEL

CABLE SUPPORT ECONOMICAL...HOLDS UP TO FOUR MC CABLES • EASY TO INSTALL Nail or screw on CUS6

Foldline (centerline)

Locking tab

Nail or screw to stud through these holes

Bend right side of strap in and over cable

© 2020 Arlington Industries, Inc.

Holds up to four MC cables centered on a 2x4!

Arlington’s economical CUS6 galvanized steel Cable Support holds cable secure and centered on a metal or wood stud.

Insert locking tab here

It’s perfect for fastening and positioning up to four individual metal clad cables – or six NM cables on a 2x4.

Installation is quick and easy. Nail or screw CUS6 to a wood or metal stud, and position the cables. Next bend the strap at the foldline (centerline). Fold the strap over the cables and insert the locking tab in the opening as shown to hold them securely in place.

• Complies with 2020 NEC, article 300.4(D)

22

CUS6 holds FOUR metal cables...or SIX NM cables 800/233-4717 • www.aifittings.com

2312ECM_Arlington_866442-1223_22.indd 1 2403ECM_46-51_Fleeting.indd 51

Product info aifittings.com/landing/cus6/

11/14/23 2:20 PM 3/12/2024 11:55:16 AM

PRODUCT NEWS Oscillating Blade

Protective Eyewear

Grasshopper eye protection combines comfort features with a wall of protection against dust, dirt, and fog. A soft EVA foam dust filter with built-in air channels fills the gap between the glasses and the face, keeping dust out. These goggles feature a removable dust gasket to allow for quick conversion into standard protective eyewear. In addition to a clear lens, it is available in a smoke lens option for normal outdoor conditions (18% of light passes through), while indoor/outdoor clear mirror lenses provide all-around tint for protection from the glare of bright artificial lighting and sunlight (50% of light passes through). For extra safety, it is fully dielectric with no metal anywhere in its construction, according to the company.

Brass Knuckle

Electric Service Tool Kit

The automotive electric service tool kit is a base of insulated tools for use with hybrid and electric vehicles (EVs) as well as troubleshooting and repair to EV charging stations. Stored in a standard toolbox, the tool kit includes the company’s double-insulated diagonal cutting, needle nose, slip joint, crimping, and water pump pliers as well as a variety of doubleinsulated cushion grip screwdrivers. The company’s tools are tested to 10,000VAC, rated for 1,000VAC/1,500VDC when working on energized parts, and marked with the (double-triangle) international safety symbol.

Cementex

The universal fit carbide oscillating blades feature application specific designs that, according to the company, deliver extreme durability and superior cutting life in metals.

High-performance carbide teeth deliver up to 50 times longer cutting life versus standard bi-metal blades.

An optimized blade and tooth design along with Black I.C.E. (industrial cooling element) keeps the teeth cool and buildup free for fast, clean cuts. The blade has a 1.5-in. cutting depth, and its universal fit, adapter-free design allows it to attach to most tools.

Diablo Tools

Self-Retracting Lifeline

The CR3-Edge personal self-retracting lifeline (SRL) is a robust, 8-ft, Class 2 SRL created for applications where the connective device of the fall protection system has potential to impact the edge of the hazard in the event of a fall. Key features include overhead and foot level tie-off options to optimize usage in a wide range of applications; an extra-large protective shock pack cover; Class 2 fall clearance charts integrated into the shock pack; and a digitally enabled QR code on the housing links to the website product page for instant access to the instruction manual, technical data sheet, compliance documentation, and other important product information.

Guardian 52

Work Boots

The TBD (Tougher Beyond Dispute) collection features protection and support in a lightweight, flexible boot design. Styles include: a waterproof Chelsea work boot that meets ASTM F2892 electrical hazard standard for soft toe work boots; a midheight lace-up with a soft toe that meets ASTM F2892 electrical hazard standard for soft toe work boots; a mid-height lace-up featuring an ergo-fit safety toe compliant with ASTM F2413 protective toe classification and ASTM F2413 electrical hazard standards; and a waterproof wellington pull-on that meets ASTM F2892 electrical hazard standard for softtoe work boots.

Georgia Boot

Insulated Tool Set

The company’s 28-piece insulated tool set is designed to meet the needs of commercial and residential electricians, industrial maintenance professionals, mobile/field service technicians, and EV mechanics.

Each tool within the set has been tested to 10,000AC and is VDE certified to 1,000VAC in compliance with IEC 60900.

The insulated tool set includes a ½-in. drive ratchet with a selection of extensions and six-point metric sockets. It also contains open-ended metric wrenches, slotted screwdrivers, Phillips screwdrivers, side-cutting pliers, lineman’s pliers, and long-nose pliers. For secure storage, the set comes with a lockable case.

Dynamic Tools

March 2024 • www.ecmweb.com

2403ECM_52-55_Regular_Products.indd 52

3/12/2024 11:35:27 AM

ARLINGTON VERTICAL OR HORIZONTAL • FOR RETROFIT & NEW WORK

Plastic & Steel 8X10 TV BOX

TM

PERFECT FOR HOME THEATER SYSTEMS

TVBU810 PLASTIC TV BOX™

Arlington’s 8X10 TV Box™ with a Plastic or Steel Box offers the ultimate in versatility for installing TVs in new and retrofit projects. There's more room in the box for wires and it installs horizontally or vertically to properly position low voltage connections behind the TV.

Mounts to stud in NEW work

© 2012 REV0314 Arlington Industries, Inc.

• Ideal for home theater systems: multiple connections for sound systems, satellite TV, CATV, DVRs • Brackets for neater cables, with a 1-1/2" knockout for ENT and other low voltage wiring • Box mounts to stud in new work; for retrofit, mounting wing screws secure box in wall

Ample space for multiple low voltage connections

97

TVBU810 w/ plastic box

TVBS810 w steel box

Secure installation in RETROFIT

Kit includes plastic or steel box, trim plate, duplex receptacle, line voltage box, wall plates, cable entry device, knockout plugs

Patented 800/233-4717 • www.aifittings.com

Product info aifittings.com/landing/TVBU810

2312ECM_Arlington_866399-1223_97.indd 1

11/14/23 11:05 AM

LOW VOLTAGE • COMMERCIAL GRADE, HEAVY-DUTY ZINC

MOUNTING BRACKETS FOR CLASS 2 LOW VOLTAGE WIRING

NEW!

Arlington’s mounting brackets are the best way to install Class 2 wiring. They seat wall plates flush with the mounting surface and install fast!

COMMERCIAL GRADE EXTRA HEAVY DUTY

© 2023 Arlington Industries, Inc.

Sturdy Non-bendable zinc

LV1M L

Our new single gang, zinc mounting bracket, LV1M, for existing construction, offers extra rigidity so it won’t bend as easily as plastic.

Plus, it has threaded holes for easy, fast device installation – and LABOR SAVINGS.

E Extra heavy-duty h ZINC Z for Existing fo W Walls

Save Time!

Threaded holes for easy device installation Also available, a variety of single-, two-, three- and four-gang NON-METALLIC low voltage brackets, and others for specialty applications.

118

Patent pending

800/233-4717 • www.aifittings.com

2312ECM_Arlington_866401-1223_118.indd 1 2403ECM_52-55_Regular_Products.indd 53

Product Info aifittings.com/landing/lvm1

11/14/23 11:26 AM 3/12/2024 11:35:28 AM

PRODUCT NEWS

Gas Nailer

The FORCE ONE gas nailer is compact, light, and offers 105 J of power. Able to nail both premium and regular nails from 13 mm to 38 mm in length, the FORCE ONE can fix all of the company’s nailer accessories directly onto materials, including steel beams, concrete, and concrete blocks. According to the company, the FORCE ONE has an improved position of the gas cell, providing enhanced balance to the tool for better stability during usage.

Also, the slim and long one-piece nose enables use in narrow spaces. In addition, the gas nailer fixes 2.8 nails per second and can drive 3,000 nails per battery load.

Celo

Clamp Meter and Thermal Imaging Camera

The FLIR CM276 is a professional clamp meter with infrared imaging, a visual camera, and solar photovoltaic (PV) direct current (DC) built for electrical test and measurement. The CM276 allows electrical professionals to troubleshoot electrical system components with infrared guided measurement technology and radiometric multispectral dynamic imaging (MSX), which overlays visible camera details onto the thermal image, helping users safely execute inspections and identify hazards before contact is made. Built into the CM276 are a 160 × 120 thermal resolution Lepton thermal camera module, a visible camera, and an LED work light for illuminating dark cabinets and spaces. Everything is housed inside a ruggedized casing that is IP40 rated and drop-tested up to 2 m. The clamp meter includes in-device rechargeable lithium polymer batteries for all-day use.

Teledyne Flir 54

EV Charging Receptacle

The new industrial grade 50A heavy-duty EV charging receptacle is a solution to power today’s plug-in electric vehicle charging stations. The receptacle is designed to sustain the necessary extended charge time and high frequency of insertions required by plug-in EV chargers. A weather-resistant model is available for outdoor use. The receptacle is built of durable high-impact nylon and features heavy-gauge, high-performance copper contacts. Pressure wire terminal connections help to ensure full contact with the conductors, and a high torque value is necessary to ensure proper connection. The device may be used with #4, #6, or #8 AWG copper wire only. Installers may use #10 AWG solid or stranded copper wire for the ground connection.

Leviton

Pulling Accessory

Pull Connect is a pulling accessory that wirelessly synchronizes both sides of a cable pull and allows it to be stopped from either side. According to the company, the easy-to-use design allows cable pulling operators to focus on the pull for enhanced safety and confidence on the job site. The product pairs with the company’s existing pulling equipment and is designed to communicate through walls, floors, and other obstructions for a synchronized pull. Pull Connect units are interchangeable, allowing them to be used in all modes (pull side, feed side, and optional repeater). It is controlled by a foot switch for handsfree operation and provides visual cues to ensure noise is not a factor during pulls. A quick-stop button on the Pull Connect also allows the users further control of the pull.

Greenlee

Tape Light Channel

Surfa 8 is a low-profile, surface-mount aluminum channel that provides hot-spot free illumination when paired with nearly all of the company’s tape lights. At 1.14 in. wide and 0.64 in. high, the Surfa 8 channel accommodates 43 of the company’s tape lights, including those for wet locations and RGBW applications. A patented aluminum construction design features countersunk hex hardware, providing a clean, modern look for both indoor and outdoor commercial and residential spaces. The Surfa 8 is shipped in 4-ft and 7-ft kits that include one field-cuttable aluminum channel with a snap-in lens, a two-pair pack of aluminum end caps with screws, mounting clips with screws, and an allen key for complete and easy installation.

Alloy LED

Wire Duct

The company has added the new AchieVe WDW series wire duct that provides more options for easy wire management. This rugged, wide finger, rigid wall wire duct is made of self-extinguishing UL 94 V-0 rated flame-retardant PVC material. AchieVe wire duct features convenient upper and lower score lines to facilitate breaking off individual fingers when extra space is needed for wider cables. The new AchieVe WDW series wide finger wire duct is available in gray, sold in 6.56-ft sections with up to a 6-in. width (cover included).

AutomationDirect

March 2024 • www.ecmweb.com

2403ECM_52-55_Regular_Products.indd 54

3/12/2024 11:35:33 AM

2401EC

WHERE FACILITY CHALLENGES FIND SOLUTIONS CENTRAL VALLEY

March 20-21, 2024 Modesto, CA

SOUTHERN CALIFORNIA

April 17-18, 2024 Anaheim, CA

NORTHWEST

May 8-9, 2024 Portland, OR

facilitiesexpo. com

OWNED & PRODUCED BY:

2401ECM_House_FacilitiesExpo.indd 55 1 2403ECM_52-55_Regular_Products.indd

12/7/23 2:47 3/12/2024 11:35:34 AMPM

CODE BASICS

NEC Requirements for Standby Power Systems

Standby power systems “kick in” when the normal power source is interrupted. But which type do you have?

By Mike Holt, NEC Consultant Legally required standby systems typically supply loads, such as heating and refrigeration systems, ventilation and smoke removal systems, sewage disposal, lighting systems, and industrial processes that, when stopped, could create hazards or hamper rescue or firefighting operations [Sec. 701.1 Note 4].

COMMISSIONING AND MAINTENANCE

Fig. 1. Article 701 covers the installation, operation, and maintenance of legally required standby systems consisting of circuits and equipment intended to supply illumination or power when the normal electrical supply is interrupted.

T

he NEC recognizes three types of standby power systems: • Emergency systems [Art. 700]. These are generally used to provide power so occupants can safely exit in the event of fire or other disaster. Other uses include providing ventilation essential to maintain life and running fire pumps.

• Legally required [Art. 701]. A government agency requires the facility to have a standby power system, usually due to public safety concerns.

• Optional [Art. 702]. This is a backup the facility owner/operator chooses to have, usually due to financial concerns.

56

The requirements for each differ, and a single facility could have all three types. Let’s look more closely at legally required systems.

LEGALLY REQUIRED

Article 701 covers the installation, operation, and maintenance of legally required standby systems consisting of circuits and equipment intended to supply illumination or power when the normal electrical supply is interrupted. The goal is to aid in firefighting, rescue operations, control of health hazards, and similar operations (Fig. 1).

To ensure the legally required standby system meets or exceeds the original installation specifications, the authority having jurisdiction (AHJ) must conduct or witness the commissioning of the legally required standby system upon completion of the installation [Sec. 701.3(A)].

Legally required standby systems must be periodically tested in a manner approved by the AHJ to ensure adequate maintenance has been performed and the systems are in proper operating condition [Sec. 701.3(B)]. Running the legally required standby system under the loads of the facility to make sure power transfers within 60 seconds is often considered an acceptable method of operational testing.

Legally required standby system equipment must be maintained per the manufacturer’s instructions and industry standards [Sec. 701.3(C)].

Part of the NEC-required maintenance is performing overcurrent protective device (OCPD) maintenance (lubrication, testing, etc.) per the applicable standard. This will greatly reduce the chances of malfunction that can result in massive legal and financial liability.

March 2024 • www.ecmweb.com

2403ECM_56-58_Code_Basics.indd 56

3/12/2024 1:47:16 PM

This maintenance must be performed by qualified personnel, which usually means outsourcing the work to a qualified testing firm that has both the personnel and the equipment.

A written record must be kept of all required tests and maintenance [Sec. 701.3(D)]. The NEC does not specify the required record retention period, but it is typical to keep such records in a CMMS where they can reside indefinitely if desired.

CAPACITY AND RATING

Equipment for a legally required standby system must be suitable for the available fault current at its terminals [Sec. 701.4(A)].

The alternate power supply must have adequate capacity per Parts I through IV of Art. 220 or by another approved method. The system capacity must be sufficient for the rapid load changes, and transient power and energy requirements associated with any expected loads [Sec. 701.4(B)].

The legally required standby alternate power supply can supply legally required standby and (also) optional standby system loads if there is adequate capacity (for the extra loads), or where a load management system includes automatic selective load pickup and load shedding; this is to ensure adequate power to the legally required standby system circuits [Sec. 701.4(C)].

Fig. 2. Section 701.7(A) requires a sign placed at the service-entrance equipment indicating the type and location of each on-site legally required standby power system.

• Whether the standby source is carrying load.

• If the battery charger is not functioning.

• A ground fault in a 4-wire, 3-phase, 277V/480V wye-connected system rated 1,000A or more.

A sign must be placed at the serviceentrance equipment indicating the type and location of on-site legally required standby power systems [Sec. 701.7] (Fig. 2).

source of power, consideration must be given to the type of service to be rendered, whether of short-time duration or long duration.

If the normal supply fails, legally required standby power must be available within TRANSFER SWITCHES Transfer switches must be automatic, CIRCUIT WIRING listed, and marked for emergency system Unlike wiring for emergency systems, 60 seconds. or legally required standby system use.

Meter-mounted transfer switches are not permitted for legally required standby system use [Sec. 701.5(A)]. Automatic transfer switches must be able to be electrically operated and mechanically held [Sec. 701.5(C)]. The short-circuit current rating of the transfer switch must be field marked on the exterior of the transfer switch [Sec. 701.5(D)]

SIGNALS AND SIGNS

Audible and visual signal devices must be installed where practicable to indicate [Sec. 701.6(A) through (D)]: • A malfunction of the standby source of power.

which must be kept entirely independent of other wiring, the wiring for legally required standby systems may be installed with other (normal) wiring because legally required standby system loads are not essential for life safety [Sec. 701.10].

POWER SOURCES

If the normal supply fails, legally required standby power must be available within 60 seconds [Sec. 701.12]. The supply system for the legally required standby system power supply can be one or more of the types of systems described in Sec. 701.12 (A) through (I)].

(A) Power Source Considerations.

In selecting a legally required standby

(B) Equipment Design and Location.

Consideration must be given to the location or design, or both, of all equipment to minimize the hazards that might cause complete failure due to floods, fires, icing, and vandalism.

Note: For further information, see ANSI/IEEE 493, Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems.

(D) Generator Set. (1) Prime Mover-Driven. A generator approved by the AHJ and sized per Sec. 701.4 is permitted as the legally required power source if it has the means to automatically start the www.ecmweb.com • March 2024

2403ECM_56-58_Code_Basics.indd 57

57

3/12/2024 11:33:48 AM

CODE BASICS

CodeWatch This e-newsletter, published twice-monthly, is dedicated to coverage of the National Electrical Code. The content items are developed by three well-known Code experts.

CodeWatch promises to: • Address changes in the Code • Explain how to properly apply the Code • Test your knowledge of the Code • Provide information on upcoming Code-related seminars and shows

Subscribe Today See all of our EC&M e-newsletters at www.ecmweb.com

58 ECM-ads.indd 1

prime mover on failure of the normal power source.

(E) Stored-Energy Power Supply Systems.

(1) Types. Stored-energy power supply systems must consist of one the following types: (1) Uninterruptible power supply (2) Fuel cell system (3) Energy storage system (4) Storage battery (5) Other approved equivalent stored energy sources that comply with Sec. 701.12 (F) Separate Service. An additional service is permitted as the legally required power source where approved by the authority having jurisdiction [Sec. 230.2(A)] and the following additional requirements: (1) Separate service conductors are installed from the electric utility.

(2) The legally required service conductors must be electrically and physically remote from other service conductors to minimize the possibility of simultaneous interruption of supply.

To minimize the possibility of simultaneous interruption, the service disconnect for the legally required power system must be remotely located from the other power system’s service disconnect [Sec. 230.72(B)].

(G) Connection Ahead of Service Disconnecting Means. If approved by the AHJ, connection ahead of (but not within) the same cabinet, enclosure, or vertical switchboard or switchgear section is permitted as the legally required power source. See Sec. 230.82(5) for additional information.

(H) Microgrid Systems. The system shall isolate the legally required standby system from other loads when the normal electric supply is interrupted or it must meet the requirements of Sec. 701.4(C).

(I) Battery-Equipped Emergency Luminaires. If used with legally required standby systems, they must comply with Sec. 701.12(H). This requirement is new with the 2023 revision.

This list in the 2023 revision differs from the one in the 2020 revision.

For example, (J) Unit Equipment was dropped from the list. There were also some renumbering and editorial

changes, such as “DC Microgrid Systems” is now “Microgrid Systems.”

OVERCURRENT PROTECTION

The OCPDs for legally required standby circuits must be accessible to authorized persons only [Sec. 701.30]. Some facility managers consider the job done if they put a sign on the door, but accessibility must be restricted by something more substantial such as a lock on the door.

OCPDs for legally required standby systems must be selectively coordinated with all supply-side and load-side OCPDs. The design must be made by an engineer or similarly qualified person and it must be documented and made available to those authorized to design, install, inspect, maintain, and operate the system [Sec. 701.32(A)].

“Selective coordination” means the overcurrent protection scheme confines the interruption to a specific area rather than to the whole system [Art. 100]. For example, if a short circuit or ground fault occurs with selective coordination, the only breaker/fuse that will open is the one protecting just the branch circuit involved. Without selective coordination, an entire floor of a building can go dark.

If legally required standby system OCPDs are replaced, they must be re-evaluated to ensure selective coordination is maintained [Sec. 701.32(B)].

If modifications, additions, or deletions to the legally required standby systems occur, selective coordination is required of the legally required system(s) [Sec. 701.32(C)]. Note: See Figure 701.32(C) for an example of how legally required standby system OCPDs selectively coordinate with all supply-side OCPDs.

AVOIDING PROBLEMS

Be careful to not mix the requirements for the different types of standby power systems. They serve different purposes and thus the NEC requirements differ (which is why we have three standby power system Articles, not just one).

However, the NEC provides the minimum requirements [Sec. 90.2] not the optimal requirements. Nothing stops you from using selective coordination in an optional standby system even though that’s required only for emergency and legally required systems.

March 2024 • www.ecmweb.com 3/30/18 7:04 PM

2403ECM_56-58_Code_Basics.indd 58

3/12/2024 11:33:48 AM

CODE QUIZ OF THE MONTH

Test Your Code IQ

How much do you know about the National Electrical Code?

Photo 103974772 © Mykyta Starychenko | Dreamstime.com

By Mike Holt, NEC Consultant

All questions and answers are based on the 2023 NEC.

Q1: Where air-conditioning and refrig-

eration equipment is installed outdoors on a roof, a(an) _____ conductor of the wire type shall be installed in outdoor portions of metallic raceway systems that use compression-type fittings. a) equipment grounding b) grounding c) equipment bonding d) bonding

Q2: The grounded conductor brought

to service equipment shall be routed with the phase conductors and shall not be smaller than specified in Table _____ when the service-entrance conductors are 1,100kcmil copper and smaller. a) 250.102(C)(1) b) 250.122

c) 310.16 d) 430.52

Q3: Locations in which combustible

dust is in the air under normal operating conditions in quantities sufficient to produce explosive or ignitible mixtures are classified as _____. a) Class I, Division 2 b) Class II, Division 1 c) Class II, Division 2 d) Class III, Division 1

Q4: Each resistance welder shall have an overcurrent device rated or set at not more than _____ of the rated primary current of the welder. a) 25% c) 125% b) 80% d) 300%

Q5: Noncombustible surfaces that are

broken or incomplete around boxes

employing a flush-type cover shall be repaired so there will be no gaps or open spaces larger than _____ at the edge of the box. a) 1/16 in. b) 1/8 in. c) 1/4 in. d) 1/2 in.

Q6: Tightening torque values for ter-

minal connections shall be as indicated on equipment or in installation instructions provided by the manufacturer. An approved means shall be used to achieve the_____ torque value. a) indicated b) identified c) maximum d) minimum See the answers to these Code questions online at ecmweb.com/21283494. www.ecmweb.com • March 2024

2403ECM_59_Code_Quiz.indd 59

59

3/12/2024 11:36:54 AM

CODE VIOLATIONS

Illustrated Catastrophes

By Russ LeBlanc, NEC Consultant All references are based on the 2023 edition of the NEC.

AWFUL AWNING LIGHTING INSTALLATION I spotted this hookup underneath an awning installed above the entranceway to a local business. There are many problems to point out here. The lack of support for the box is one big problem. The conductors are literally supporting the box. This does not comply with any of the box support requirements in Sec. 314.23(A)-(H).

Another huge problem with this installation is the lack of an equipment grounding conductor (EGC). The liquidtight flexible nonmetallic conduit (LFNC) only contains a black and white conductor. Section 406.4(B) requires an EGC to be connected to the grounding terminal of the duplex receptacle.

This non-weather resistant duplex receptacle does not comply with either Sec. 406.(9)(A) for damp locations or Sec. 406.9(B) for wet locations. The enclosure for the duplex receptacle also does not comply with either of those two Sections.

Finally, the incomplete LFNC raceway does not comply with Sec. 300.12. The exposed THWN conductors are not sunlight resistant as specified in Sec. 310.10(D). Based on all the visible problems I can see here, I tend to doubt any GFCI protection is provided for this duplex receptacle as required by Sec. 210.8(B)(6). All in all, I think this is a pretty scary installation.

GOOD INTENTIONS, BAD OUTCOME Placing a concrete barrier in front of this brand-new electrical service was a good idea to protect the equipment from being damaged by vehicles parking near this building. It may have been an attempt to protect per Sec. 240.24(C). Unfortunately, the location of the concrete barrier should have been better planned out. Its present location is smack dab in the middle of the working space required by Sec.110.26(A). The location of this barrier is so close to the electrical equipment that it prevents the removable lift-up covers from being easily lifted up and out of the equipment. Thankfully, the flip-up covers for the circuit breakers can be fully opened at least — otherwise, that would have been a nightmare if one of those breakers needed to be turned off in a hurry.

With the present layout, I would not consider these overcurrent devices as being readily accessible as required by Sec. 240.24(A). Sliding that concrete barrier out 3 ft could make for a Code-compliant installation, but, of course, that may cause problems with parking. A better solution needs to be found here.

60

March 2024 • www.ecmweb.com

2403ECM_60-61_Catastrophes.indd 60

3/12/2024 11:39:52 AM

2403EC

THE WEST COAST’S PREMIER LIGHTING & DESIGN EXPERIENCE

APRIL 17- 18, 2024

ANAHEIM CONVENTION CENTER, ANAHEIM, CA

REGISTER FOR FREE * AT: WWW.LIGHTSPE CWE ST.COM

Presented by:

Owned by:

*Qualified Attendees (which do not include lighting suppliers/manufacturers or non-sponsoring agencies) can register for free through April 1, 2024

2403ECM_House_LightSpecWest24.indd 1 2403ECM_60-61_Catastrophes.indd 61

2/16/24 2:07 3/12/2024 11:39:53 AMPM

MARKETPLACE To advertise in EC&M Classified and Marketplace, contact

STEVE SUAREZ Media Account Executive

NO BURN-THROUGH

CHAMPION DUCT® ELBOWS

O: 941-259-0867 M: 816-588-7372

ssuarez@endeavorb2b.com

SOLVE PROJECT CHALLENGES

Podcasts

No burn-through eliminates elbow repairs Lower materials and installation costs Fault resistance makes repairing cables easy DOWNLOAD NEW ELBOW EGUIDE

2403ECM_ChampionFiberglass_MKPL.indd 1

2/20/24 8:23 AM

Women at Griffin Electric:

PAVING the WAY Corporate Headquarters: 116 Hopping Brook Road Holliston, MA 01746 (800) 421-0151 Regional Offices: • Pelham, AL • Doraville, GA • Charlotte, NC • Durham, NC

oud Pr

to suppor t

Women in Construction

Visit us at waynejgriffinelectric.com MA Lic 4536 A1

MA Lic 8999 A

2403ECM_WayneJGriffin.indd 1 2403ECM_62_marketplace.indd 62

CT Lic ELC.0201601-E1

3/6/24 8:36 AM 3/12/24 11:29 AM

ADVERTISER INDEX Advertiser

SALES STAFF

Page #

Phone #

Web Address

Arlington Industries, Inc.

17

800-233-4717

www.aifittings.com

Arlington Industries, Inc.

19

800-233-4717

www.aifittings.com

Arlington Industries, Inc.

21

800-233-4717

www.aifittings.com

Arlington Industries, Inc.

23

800-233-4717

www.aifittings.com

Vice President

Arlington Industries, Inc.

27

800-233-4717

www.aifittings.com

Mike Hellmann

Arlington Industries, Inc.

29

800-233-4717

www.aifittings.com

Arlington Industries, Inc.

31

800-233-4717

www.aifittings.com

Arlington Industries, Inc.

33

800-233-4717

www.aifittings.com

Arlington Industries, Inc.

35

800-233-4717

www.aifittings.com

Western U.S. & Western Canada

Arlington Industries, Inc.

37

800-233-4717

www.aifittings.com

Ellyn Fishman

Arlington Industries, Inc.

39

800-233-4717

www.aifittings.com

Key Account Manager

Arlington Industries, Inc.

41

800-233-4717

www.aifittings.com

(949) 239-6030

Arlington Industries, Inc.

43

800-233-4717

www.aifittings.com

Email: efishman@endeavorb2b.com

Arlington Industries, Inc.

45

800-233-4717

www.aifittings.com

Arlington Industries, Inc.

47

800-233-4717

www.aifittings.com

Arlington Industries, Inc.

49

800-233-4717

www.aifittings.com

Account Manager

Arlington Industries, Inc.

51

800-233-4717

www.aifittings.com

24 Houghton Street

Arlington Industries, Inc.

53

800-233-4717

www.aifittings.com

Barrington, RI 02806

Arlington Industries, Inc.

64

800-233-4717

www.aifittings.com

Phone: (401) 246-1903

Atkore

IFC

—

www.atkore.com

E-mail: dsevin@endeavorb2b.com

BaseTek, LLC

40

877-712-2273

www.basetek.com

Champion Fiberglass, Inc.

BC

—

www.championfiberglass.com

FacilitiesExpo 2024

55

—

www.facilitiesexpo.com

Account Manager

Intermatic, Inc.

13

—

www.Intermatic.com

7450 W. 130th Street, Suite #210

LightSpec West

61

—

www.lightspecwest.com

Overland Park, KS 66213

Mike Holt Enterprises

IBC

888-632-2633

www.mikeholt.com

Phone: (913) 967-7543

Orbit Industries, Inc.

15

213-451-6091

www.orbitelectric.com

E-mail: jthompson@endeavorb2b.com

Penn Aluminum Conduit & EMT

11

—

www.pennconduit.com

Progressive Insurance

7

—

ProgressiveCommercial.com

Socomec, Inc.

1

—

www.socomec.us

S-P Products, Inc.

5

800-233-8595

www.SPProducts.com

7450 W. 130th Street, Suite #210

Underground Devices, Inc.

3

847-205-9000

www.udevices.com

Overland Park, KS 66213

Zip Cable Tray Systems, Inc.

9

866-818-0299

www.ziptray.ca

Phone: (816) 588-7372

(Every effort is made to ensure the accuracy of this index. However, the publisher cannot be held responsible for errors or omissions.)

To place a display ad (1/6 page or larger), call the Advertising Sales Representative for your area.

Andover, MA Phone: (978) 289-0098 E-mail: mhellmann@endeavorb2b.com

Northeast U.S. & Eastern Canada David Sevin

Midwest, Southeast,and Southwest Jay Thompson

Marketplace/Inside Sales Steve Suarez Media Account Exec

E-mail: ssuarez@endeavorb2b.com

www.ecmweb.com • March 2024

2403ECM_63_Ad_Index.indd 63

63

3/12/2024 11:42:44 AM

CODE VIOLATIONS

By Russ LeBlanc, NEC Consultant

H

ow well do you know the Code?

Think you can spot violations the original installer either ignored or couldn’t identify?

Here’s your chance to moonlight as an electrical inspector and second-guess someone else’s work from the safety of your living room or office. Can you identify the specific Code violation(s) in this photo? Note: Submitted comments must include specific references from the 2023 NEC. Hint: An alarming identification method

‘TELL THEM WHAT THEY’VE WON...’

Using the 2023 NEC, correctly identify the Code violation(s) in this month’s photo — in 200 words or less — and you could win an Arlington Industries 18-in. Slider Bar and plastic box for mounting between studs with non-standard spacing.

E-mail your response, including your name and mailing address, to russ@russleblanc.net, and Russ will select three winners (excluding manufacturers and prior winners) at random from the correct submissions. Note that submissions without an address will not be eligible to win.

JANUARY WINNER Our winners this month were Mark De Angelis, an EC&M reader from Pembroke, N.H.; Ronnie Morales, a fire systems inspector for the City of Temecula, Calif.; and Cassandra Knapp, a participant from Corinth, Miss. They were able to correctly cite some of the Code violations in this photo.

Section 408.7 requires unused circuit breaker openings to be closed with closures identified for that purpose or some other approved means that could provide protection equivalent to the enclosure walls. Section 110.12(A) also requires unused openings to be closed up. Installing circuit breakers from several different manufacturers may be a violation of Sec. 110.3(B) if the breakers are not listed for use with this particular panelboard.

The lack of descriptors for many of the circuits is a violation of Sec. 408.4(A).

Each circuit must be clearly marked to indicate its specific purpose. Even the spare positions containing an overcurrent device are required to be marked to indicate they are spares, per Sec. 408.4(A)(3). Lastly, Sec. 110.27(A) requires live parts to be guarded against accidental contact by approved enclosures.

ENTER to WIN...

BETTER IDEAS

SL1B18 SINGLE GANG KIT

SLIDER BAR™ mounts plastic (or metal) boxes between studs with non-standard spacing 64 March 2024 • 1www.ecmweb.com 2106ECM_Arlington_StripAd.indd

2403ECM_64-C4_WWH.indd 64

6/9/21 9:41 AM

3/12/2024 11:43:43 AM

2402EC

2402ECM_House_MikeHolt.indd 1 2403ECM_64-C4_WWH.indd 3

2/1/24 1:10 PM 3/12/2024 11:43:44 AM

Champion Duct® Electrical Conduit Elbow

NO BURN-THROUGH

CHAMPION DUCT® ELBOWS SOLVE PROJECT CHALLENGES No burn-through eliminates elbow repairs

Fault resistance makes repairing cables easy

Lower materials and installation costs

Durable and corrosion-resistant for project longevity ©2016 Champion Fiberglass, Inc.

DOWNLOAD NEW ELBOW EGUIDE

BIM/REVIT

2403ECM_ChampionFiberglass.indd 1 2403ECM_64-C4_WWH.indd 4

2/20/24 8:21 3/12/2024 11:43:45 AMAM