Sofis - Flexi Remote Operator

FlexiDrive remote operator

Safe operation of your inaccessible, hard-to-reach manual valves With the FlexiDrive remote operator you can safely work valves that are above, below, immersed, in tight confined spaces or located in potentially dangerous environments.

An operator station is placed up to 30 metres away from your valve...

Torque is transmitted through a cable to drive your valve.

A valve station is fitted to a valve via a bespoke anchor and adaptor...

Ensure safe operation of hard-to-reach valves

Reduce costs by avoiding dedicated actuators

Your manual valves are sometimes difficult to reach or positioned in inaccessible, hazardous locations or with confined entry points. Direct access could prove dangerous. Using FlexiDrive, you can now operate your valve from an accessible location, without compromising safety.

To operate valves in the most extreme, challenging locations, a dedicated actuator may seem like the only option. However, by simply installing a FlexiDrive, manual valves can be operated efficiently and effectively. This comes at a fraction of the cost of installing and maintaining permanent dedicated actuators and the required infrastructure.

A simple and effective method of valve operation

Avoid unsafe situations

You may have to climb up, under and around pipework. Alternatively, scaffolding may be required, which can take time to organise and install. A scissor lift could be used, but these have costly hire charges.

Ladders are another option, but these carry their own safety risks through trips and falls. FlexiDrive simplifies your valve operations by removing the need for any of the above.

By positioning the operator station away from the valve, you keep personnel out of hazardous environments such as chemical leaks, steam, vibration, or radiation. The FlexiDrive is a safe and reliable alternative to commonly used chain wheels, eliminating the risks of falling or tangled chains that could injure operators, cause strain injuries, or result in uncontrolled valve actuation. This improves both safety and efficiency on site.

FlexiDrive gets the operator out of a potentially dangerous environment and allows the valve to be operated in a safe and ergonomic position.

FlexiDrive models FlexiDrive is adaptable to almost any handwheel or lever operated valve. Casted in 316 stainless steel, it is suitable for the most extreme operating environments.

As a fully mechanical system, it requires no specific infrastructure and only minimal maintenance.

The operator station can be mounted onto existing railings or bespoke fixtures. Placing several operator stations close to each other allows the efficient operation of several valves from one central location.

Operator station

Valve station

Depending on the maximum breakout torque of your valve, there are different options available to you.

FlexiDrive can accommodate up to 540° of bend in the cable run and your valve can be operated from up to 30 metres away. The operator station can be mounted to a wall, rail or pedestal for operational convenience.

The valve station is fitted directly to the valve using a purpose designed mounting kit. It can be optionally supplied with a handwheel or lever for local operation.

A submersible valve station for installation on valves below water, or in potentially flooded areas, is optionally avaibable.

Operator station

Valve station

Position indicator

Position indicator

There is a visual position indicator at the operator station, so you can quickly and easily determine the position of your valve.

Applications Valves in remote or hard to reach places

Valves in submersed pits

• You can position the operator station up to 30 metres away from the valve at your preferred location.

• This can be on the same level, directly above or under, adjacent or parallel as the cable can facilitate bends.

• The cable can run alongside walls, pipework or any of your existing plant infrastructure.

• Can also be used for confined entry points.

• With the optional submersible FlexiDrive valve station you can operate your valves from ground level, without the need to enter a flooded pit or any other body of fluid to gain access to your valve.

• The submersible valve station is IP68 tested and rated.

FlexiDrive can be used to protect compartments liable to flooding.

Valves in hazardous locations • FlexiDrive can be passed around and through walls and floors to reach your valve using bulkhead seals.

• Low temperature and heat & flame protection options are availble.

• Suitable for use in potentially explosive environments Zone 1 & 2

Experience FlexiDrive remote operator is a cost effective, safe solution to your hardto-reach manual valve operations.

It is used globally by major end users to protect their operators and to maximise efficiency during valve operations.

Recreated LOGO

Sofis is the leading global smart valve operation solutions provider and specialist, ensuring safe and sustainable manual valve operations. With our integrated solutions we help customers optimize valve operation, protecting people, property and the planet. Renowned for our smart solutions and our expertise, we have been serving industries with critical valve operation processes since 1985.

Contact www.sofisglobal.com/contact marketing@sofisglobal.com +31 172 471 339 Locations Alphen aan den Rijn, Netherlands +31 172 471 339 Maldon, United Kingdom +44 1621 220 001 Stockstadt, Germany +49 6027 405 12-0 Houston, USA +1 346 352 2140 Vadodara, India +91 9879 559 345 Bengaluru, India +91 80 6747 5300

No accidents.

No injuries.

No downtime.

No spills.

No loss.

P-FLD-E-BR-24-12-001-03-EN

NEW CASTLE

TALLMADGE

SOUTH POINT

Tel: 724-368-8725 Email: sales@portersvilleprd.com

Tel: 330-253-4800 Email: sales@portersvilleprd.com

Tel: 740-377-0018 Email: sales@portersvilleprd.com

RICHMOND

KINGSPORT

RALEIGH

Tel: 804-593-2384 Email: sales@portersvilleprd.com

Tel: 423.482.0496 Email: sales@portersvilleprd.com

Tel: 984-238-1720 Email: sales@portersvilleprd.com

SIGNAL HILL

BAKERSFIELD

BENICIA

Tel: 562-424-8108 Email: Sales@BV-BM.com

Tel: 661-589-6801 Email: Sales@BV-BM.com

Tel: 707-590-6688

2680 New Butler Rd. New Castle, PA 16101

700 Southlake Blvd. North Chesterfield VA 23236

143 S.Thomas Rd. Tallmadge, OH 44278

1551 Shipley Ferry Road Blountville, TN 37617

403 Technology Dr South Point, OH 45680

3915 Beryl Road, Raleigh NC 27607

www.portersvilleprd.com

1500 E. Burnett St. Signal Hill, CA 90755

3800 Fruitvale Avenue Bakersfield, 93308

3195 Park Road, Benicia, CA 94510

Email: Sales@BV-BM.com

GILBERT

1525 S Higley Road Suite 104 Gilbert, AZ 85296 Tel: 480-741-4719 Email: Sales@BV-BM.com

www.bv-bm.com

The copyright of this document is vested to Sofis, The United Kingdom. All rights reserved. Neither the whole or any part of this document may be reproduced, stored in any retrieval system or transmitted in any form or by any means (electronic, mechanical, reprographic, recording or otherwise) without the prior written consent of the copyright owner. Manufactured in the United Kingdom, 6 Waterside Business Park, Witham, Essex. CM8 3YQ.