Dock Builders Supply - Products Catalog (Volume 12)

Page 1

www.DockBuilders.com VOLUME 12 Products Catalog

Welcome to Dock Builders Supply!

For over 25 years, Dock Builders Supply has provided high quality marine construction materials and accessories for residential and commercial projects. A shared appreciation of the rewards and challenges of waterfront living and the nautical lifestyle forms a common bond between us and our customers. Our products are designed and selected with painstaking attention to detail to ensure complete customer satisfaction with respect to functionality and attractiveness. Many of the innovative products in our catalog incorporate the best technology and construction methods available today. From simple swim platforms and recreational docks to complex commercial marina systems, we can supply you with the right materials for your project.

Our staff consists of knowledgeable professionals with many years of marine construction experience that stand by ready to work with you when designing your project. Dock Builders Supply can provide you with detailed material estimates and drawings to better assist you with planning your project. While working with you, your project becomes our project! We share your enthusiasm during project planning and stand by to assist you during its implementation. Above all else, our goal is to become your reliable partner, ready to provide advice necessary to ensure successful completion of your project.

If, after perusing our catalog, you are unable to locate a product that you need, please contact our resourceful staff, and we can assist in your search. We are constantly expanding our product lines and value your feedback and suggestions. Please visit our website periodically to view our newest products until our next catalog debuts.

Once again, we appreciate your business and welcome you to our latest products catalog!

Table of Introduction ..................................... 2 Floating Dock Photos .................... 4 Floating Dock Plans ........................ 5 DPI Floats™ .................................... 6-7 Permafloat™ ................................ 8-10 Dow Styrofoam™ Billets .............. 11 Eagle Floats™ ............................ 12-15 Lift Tanks ......................................... 16 Wave Attenuator ........................... 17 Dock Hardware ....................... 18-25 Aluminum Gangways ................. 26 Water Stanchions ......................... 27 Ladders ...................................... 28-29 Piling Caps ..................................... 30 Piling Wrap .................................... 31 Dock Bumpers & Fenders .... 32-35 Mooring Products ................. 36-40 Cleats ................................................ 41 Power Pedestals .................... 42-46 Lighting ..................................... 47-51 Marker Buoys .......................... 52-54 Fish Attraction Lights ................. 55 Fish Cleaning Tables ............ 56-57 Dock Boxes .............................. 58-59 Wood Sealant ............................... 60 Decking (SunWalk™) ................. 61 Seawall Products .......................... 62 Galvanized Fasteners .................. 63 Stainless Steel Fasteners ...... 64-65 Screw Gun (Muro™) ................... 66 Tools ................................................. 67 Terms & Conditions .............. 68-69 Index .......................................... 70-71
Introduction Table Of Contents 800.677.4710 www.DockBuilders.com 2 3
Assorted Standard Sized Floating Docks and Swim Platforms Floating Dock Photos DockBuilders’ Floating Dock Plans can help you get up to speed quickly in building your dock. Our knowledgeable design team is ready to assist you with your custom dock design, or we can incorporate one of our many pre-configured popular designs into your floating dock project. Either way, we will help you make the floating dock you envision a reality! Call us today to get started on your custom dream dock! 1.800.677.4710 Floating Dock Plans 6’ x 10’ 8’ x 10’ 10’ x 10’ 6’ x 12’ 8’ x 12’ 10’ x 12’ 12’ x 12’ 6’ x 14’ 8’ x 14’ 10’ x 14’ 12’ x 14’ 14’ x 14’ 6’ x 16’ 8’ x 16’ 10’ x 16’ 12’ x 16’ 14’ x 16’ 16’ x 16’ 6’ x 18’ 8’ x 18’ 10’ x 18’ 12’ x 18’ 14’ x 18’ 16’ x 18’ 18’ x 18’ 6’ x 20’ 8’ x 20’ 10’ x 20’ 12’ x 20’ 14’ x 20’ 16’ x 20’ 18’ x 20’ 20’ x 20’ *Custom specialty utility/work platform and U-Dock designs also available ‘ ‘ Floating Dock Photos Floating Dock Plans 800.677.4710 www.DockBuilders.com 4 5

Features:

• Rugged, Seamless, Rotationally Molded Encasement

• Installs Easily to Wood, Steel, or Aluminum Frames

• Rated For Freshwater & Saltwater Environments

• Strong, Wall Thickness of .150” (Nominal)

• Expanded Polystyrene (EPS) Foam-Filled

• Molded-In Mounting Slots

• Made in the USA

• Tank Tested Buoyancy Ratings +5/-5%

• For Residential Docks & Commercial Marinas

• US Army Corps of Engineers Approved

DPI Dock Floats are durable, high-quality floats that are ideal for new and existing dock systems. Our floats have a flat top with molded-in mounting slots for easy attachment to any dock framework; whether wood, steel, or aluminum. They are a one-piece rotationally molded part, which eliminates seams than could result in separation and leakage. The .150” nominal thick shell is made of extra strong virgin polyethylene containing ultraviolet inhibitors. This tough shell helps prevent damage from the sun, salt water, fresh water, debris, oil, gas, and marine organisms. The interior of the float is filled with expanded polystyrene (EPS) foam.

Floating docks built with DPI dock floats will provide long lasting and carefree encapsulated flotation, resulting in long-range savings for recreational docks and complex marinas.

36” x 72” Floats

*All dimensions, weights, and buoyancies are approximate

Dock Floats

48” x 48” Floats

48” x 72” Floats

24” x 36” Floats

24” x 48” Floats

*All dimensions, weights, and buoyancies are approximate

36” x 48” Floats

*All dimensions, weights, and buoyancies are approximate

36” x 96” Floats

x 60” Floats

Floats

*See website for 18” depth design

*All dimensions, weights, and buoyancies are
dimensions, weights, and buoyancies are 72” 48”
*All
dimensions, weights, and buoyancies are approximate 48” x 96”
dimensions, weights, and buoyancies are approximate 48”
*All dimensions, weights, and buoyancies are approximate 96” 36” 48” 48” 60” 48” DF-D-48048-12 DF-D-48048-16 DF-D-48048-20 DF-D-48048-24 53 57 64 79 908 1,218 1,522 1,815 Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” 24” Depth
*All
*All
72” 36” 96” 48”
48” 24” 48” 36” DF-D-36072-12 DF-D-36072-16 DF-D-36072-20 DF-D-36072-24 DF-D-36072-32 58 67 81 90 107 1,062 1,367 1,703 2,038 2,670 Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” 24” 32” Depth DF-D-36048-08 DF-D-36048-12 DF-D-36048-16 DF-D-36048-18* DF-D-36048-20 DF-D-36048-24 34 38 44 47 50 62 469 677 904 1,008 1,128 1,363 Item # Weight (lbs) Buoyancy (lbs) 8“ 12” 16” 18” 20” 24” Depth DF-D-24048-12 DF-D-24048-16 DF-D-24048-18 DF-D-24048-20 DF-D-24048-24 27 32 34 38 45 442 588 661 731 869 Item # Weight (lbs) Buoyancy (lbs) 12” 16” 18” 20” 24” Depth DF-D-36096-12 DF-D-36096-16 DF-D-36096-20 DF-D-36096-24 DF-D-36096-32 75 92 105 115 141 1,410 1,825 2,280 2,769 3,629 Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” 24” 32” Depth DF-D-48096-12 DF-D-48096-16 DF-D-48096-20 DF-D-48096-24 DF-D-48096-32 81 108 122 137 161 1,856 2,468 3,086 3,699 4,922 Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” 24” 32” Depth DF-D-48072-12 DF-D-48072-16 DF-D-48072-20 DF-D-48072-24 DF-D-48072-32 62 82 93 113 130 1,384 1,841 2,302 2,749 4630 Item # Buoyancy (lbs) 12” 16” 20” 24” 32” Depth Weight (lbs) *All dimensions, weights, and buoyancies are approximate 36” 24” DF-D-24036-12 DF-D-24036-16 DF-D-24036-20 22 28 33 330 443 530 Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” Depth 36” 18” 9” 9” 24” 12” 6” 6” DF-D-48060-12 DF-D-48060-16 DF-D-48060-20 DF-D-48060-24 52 69 76 ** 1,152 1,531 1,919 ** Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” 24” Depth Dpi Dock Floats Dpi Dock Floats 800.677.4710 www.DockBuilders.com 6 7 96” 36” 24” 24” 24” 12” 12” 24” 6” 6” 48” 36” 24” 6” 6” 24” 12” 12” 48” 24” 12” 12” 24” 12” 6” 6” 72” 24” 12” 12” 24” 12” 12” 24” 48” 48” 48” 24” 12” 12” 24” 12” 12” 60” 24” 12” 12” 48” 24” 6” 6” 24” 96” 24” 12” 12” 24” 12” 12” 24” 24” 48” 72” 24” 6” 6” 36” 24” 24” 12” 12”
DPI
DPI Dock Floats

Permafloat™ Dock Floats

Features:

• Commercial or Residential Applications

• Rugged, Seamless, Rotationally Molded Encasement

• Expanded Polystyrene (EPS) Foam Filled

• Molded Mounting Slots & Pilot Holes

• Nominal Wall Thickness of 0.150”

• Maintenance Free

• Made in the USA

• US Army Corps of Engineers Approved

• Resists Salt Water, Oil, Gas, and Marine Life

• Installs Quickly to Wood, Steel, or Aluminum Frames

• Tank Tested Buoyancy Ratings +0/-5%

Permafloat™ Dock Floats are a one-piece rotationally molded part, which eliminates seams that could result in separation and leakage. The 0.150” nominal thick shell is made of extra strong virgin polyethylene containing ultraviolet inhibitors. This tough shell helps prevent damage from the sun, salt water, fresh water, debris, oil, gas, and marine organisms.

Each float is foam filled with expanded polystyrene, which contains no CFCs or HCFCs. DockBuilders’ Permafloat™ dock floats have a flat top with molded-in mounting slots for easy attachment to any dock framework; whether wood, steel, or aluminum. Floating docks built with DockBuilders’ Permafloat™ dock floats will provide long lasting encapsulated flotation, resulting in long-term savings for recreational docks as well as complex marinas.

Dock Float Fasteners

12” x 48” Floats

Permafloat™ Dock Floats

20” x 72” Floats

Permafloat™ Dock Floats

20” x 96” Floats

24” x 36” Floats

*All

24” x 48” Floats

*All dimensions, weights, and buoyancies are approximate

36” x 48” Floats

36” x 72” Floats

800.677.4710 www.DockBuilders.com 8 9 *All dimensions, weights, and buoyancies are approximate
DF-C-12048-12 DF-C-12048-20 16 22 207 334 Item # Weight (lbs) Buoyancy (lbs) 12” 20” Depth 48” 12” 48” 24” 12” 24”
*All dimensions, weights, and buoyancies are approximate DF-C-20072-08 DF-C-20072-10 26 29 356 443 Item # Weight (lbs) Buoyancy (lbs) 8” 10” Depth 72” 20” 72” 24” 20” 24” 24”
*All dimensions, weights, and buoyancies are DF-C-20096-10 39 598 Item # Buoyancy (lbs) 10” Depth Weight (lbs) 96” 12” 20” 24” 24” 24” 12” 96” 20”
48” 24” 24” 24” DF-C-24048-08 DF-C-24048-12 DF-C-24048-16 DF-C-24048-18 DF-C-24048-20 DF-C-24048-24 22 27 32 34 36 41 288 454 598 652 731 882 Item # Weight (lbs) Buoyancy (lbs) 8” 12” 16” 18” 20” 24” Depth
dimensions, weights, and buoyancies are 36” 18” 24” 18” 36” 24” DF-C-24036-12 DF-C-24036-16* DF-C-24036-20 21 25 28 332 446 537 Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” Depth *See website for 16” depth design
dimensions, weights, and buoyancies are approximate 48” 36” DF-C-36048-08 DF-C-36048-12 DF-C-36048-16 DF-C-36048-20 DF-C-36048-24 32 38 44 50 57 472 700 925 1,132 1,364 Item # Weight (lbs) Buoyancy (lbs) 8” 12” 16” 20” 24” Depth 48” 36” 24” 24”
dimensions, weights, and buoyancies are
*All
*All
72” 36” 24” 24” 24” *See website for 32” depth design DF-C-36072-12 DF-C-36072-16 DF-C-36072-20 DF-C-36072-24 DF-C-36072-32* 55 64 72 82 105 1,061 1,402 1,718 2,072 2,678 Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” 24” 32” Depth 72” 36”
Item # LB-3804SS W-38SSF LB-3804 W-38GF (Stainless) 3/ ” x 4” Lag Bolts (Stainless) 3/ ” x 1½” Fender Washer (Galvanized) / ” x 4” Lag Bolts (Galvanized) / ” x 1½” Fender Washer Description Recommended hardware for fastening floats to wood framing Stainless steel hardware is recommended for salt water environments.

Permafloat™ Dock Floats Dock Floats - Billets

36” x 96” Floats

42” x 72” Floats

48” x 48” Floats

STYROFOAM™ Buoyancy Billets are another smart choice for floating structures. Buoyancy billets may be cut to fit or retrofit into floating dock compartments. They can also be recessed inside the floating dock frame (directly underneath the decking boards) to provide an extremely low freeboard without sacrificing buoyancy, making it a popular choice for kayak/canoe and competitive rowing enthusiasts.

Extremely Buoyant:

The closed-cell structure of STYROFOAM™ is comprised of millions of tiny air bubbles providing exceptionally strong and redundant buoyancy. These non-interconnected air cells serve as independent buoyancy chambers so the Styrofoam™ billets will not lose their buoyancy even if punctured.

Rugged:

STYROFOAM™ brand buoyancy billets cannot become waterlogged, do not corrode or breakdown into small particles, and provide years of service under normal conditions. They resist the attack of destructive marine growths and are unaffected by salt or fresh water. Their light weight also makes the DOW Styrofoam™ buoyancy billets easier to handle and install, keeping installation costs low!

48” x 60” Floats

48” x 96” Floats

DOW StyrofoamTM Billets

**Due to shipping restrictions, billets must be ordered in quantities of 6 or more**

Dock Floats - Billets

20” 96”
Styrofoam™
Note: Consult with applicable permitting agencies to make certain this product conforms to codes and permitting requirements before ordering. Sample floating dock sketch
Billet-102096 20 610 10” Item # Weight (lbs) Buoyancy (lbs) Depth 10” All dimensions, weights, and buoyancies are approximate 48” x 72”
*All dimensions, weights, and buoyancies are 72” 24” 48” 24” 24” 24” 24” *See website for 32” depth design DF-C-48072-12 DF-C-48072-16 DF-C-48072-20 DF-C-48072-24 DF-C-48072-32* 71 82 93 105 131 1,420 1,880 2,307 2,786 3,648 12” 16” 20” 24” 32” Item # Weight (lbs) Buoyancy (lbs) Depth 72” 48”
is a Trademark of The Dow Chemical Company.
using Styrofoam™ Billets. Styrofoam™ Billets
Floats
dimensions, weights, and buoyancies
approximate 60” 30” 24” 30” 24” 48” DF-C-48060-12 DF-C-48060-16 DF-C-48060-20 DF-C-48060-24 60 69 78 88 1,186 1,568 1,923 2,320 12” 16” 20” 24” Item # Weight (lbs) Buoyancy (lbs) Depth 60” 48”
*All
are
dimensions, weights, and buoyancies are 96” 24” 24” 48” 24” 24” 24” 24” DF-C-48096-12 DF-C-48096-16 DF-C-48096-20 DF-C-48096-24 DF-C-48096-32* 94 108 122 137 167 1,900 2,518 3,092 3,737 4,920 12” 16” 20” 24” 32” Item # Weight (lbs) Buoyancy (lbs) Depth 96” 48” *See website for 32” depth design
*All
*All dimensions, weights, and buoyancies are 72” 42” 24” 24” 24” DF-C-42072-16 74 1,636 Item # Weight (lbs) Buoyancy (lbs) 16” Depth 72” 42”
*All dimensions, weights, and buoyancies are 48” 24” 48” 24” 24” 24” DF-C-48048-12 DF-C-48048-16 DF-C-48048-20 DF-C-48048-24 49 57 64 73 940 1,242 1,522 1,836 12” 16” 20” 24” Item # Weight (lbs) Buoyancy (lbs) Depth 48” 48”
800.677.4710 www.DockBuilders.com 10 11
*All dimensions, weights, and buoyancies are approximate Item # Weight (lbs) Buoyancy (lbs) Depth DF-C-36096-12 DF-C-36096-16 DF-C-36096-20 DF-C-36096-24 DF-C-36096-32* 12” 16” 20” 24” 32” 73 85 95 108 134 1,412 1,870 2,295 2,771 3,626 *See website for 32” depth design 96” 36” 96” 24” 36” 24” 24” 24”

Features:

• Commercial or Private Applications

• Rugged, Seamless, Rotationally-Molded Polyethylene Outer Shell

• Solid Expanded Polystyrene Foam Core

• Made in the USA

• Dart Impact Tested

• Hunt Absorption Tested

• Nominal Wall Thickness of .150”

• Oil, Gas and Marine Life Resistant

• Convenient Molded Mounting Slots

• Hydrodynamically Contoured Corners

• Installs Quickly to Wood, Steel or Aluminum Frames

• US Army Corps of Engineers Approved

• Rigorous Testing and Quality Assurance

Eagle Dock Floats™ are a one-piece rotationally molded part, which eliminates seams than could result in separation and leakage. The .150” nominal thick shell is made of extra strong virgin polyethylene containing ultraviolet inhibitors. This tough shell helps prevent damage from oil, gas, and marine organisms. Each float has a solid, foam-filled, expanded polystyrene core using precision computer-controlled technology.

Eagle Dock Floats™ have a flat top with molded-in mounting slots for easy attachment to any dock framework; whether wood, steel or aluminum. Floating docks built with DockBuilders’ Eagle dock floats will provide long lasting and carefree encapsulated flotation, resulting in longrange savings for recreational docks and complex marinas.

16” x 36” Floats

*All dimensions, weights, and buoyancies are approximate

24” x 36” Floats

24” x 48” Floats

Eagle Dock

Floats

x 96” Floats

24” x 60” Floats

24” x 96” Floats

30” x 48” Floats

*All dimensions, weights, and buoyancies are approximate 96” 24” 48” 24” 96” 20” 20”
DF-E-20096-11 43* 670* Item # Weight (lbs) Buoyancy (lbs) 11” Depth *All dimensions, weights, and buoyancies are approximate
DF-E-20072-08 29* 350* Item # Weight (lbs) Buoyancy (lbs) 8” Depth *All dimensions, weights, and buoyancies are approximate 18” x 72”
DF-E-18072-16 DF-E-18072-24 41* 56* 640* 950* Item # Weight (lbs) Buoyancy (lbs) 16” 24” Depth 72” 24” 18” 9” 9” 24” 24” 72” 18” 20” 72”
20” x 72”
Floats
DF-E-24060-12 DF-E-24060-16 36* 44* 500* 670* Item # Weight (lbs) Buoyancy (lbs) 12” 16” Depth *All dimensions, weights, and buoyancies are
DF-E-24048-08 DF-E-24048-12 DF-E-24048-16 DF-E-24048-18 DF-E-24048-20 DF-E-24048-24 DF-E-24048-36 23* 29* 36* 39* 42* 48* 67* 290* 390* 530* 620* 680* 790* 1,160* Item # Weight (lbs) Buoyancy (lbs) 8” 12” 16” 18” 20” 24” 36” Depth *All dimensions, weights, and buoyancies are 24” 48” 24” 12” 12” 12” 6” 6” 48” 24”
*All dimensions, weights, and buoyancies are approximate
DF-E-30048-12 35* 540* Item # Weight (lbs) Buoyancy (lbs) 12” Depth *All dimensions, weights, and buoyancies are approximate
DF-E-24096-12 DF-E-24096-28 56* 103* 880* 1,930* Item # Weight (lbs) Buoyancy (lbs) 12” 28” Depth *All dimensions,
and
approximate 24” 6” 6” 12” 6” 6” 36” 24” 60” 24” 36” 24” 60” 24” 12” 18” 18” 12” 6” 6” 12” 96” 24” 96” 24” 24” 24” 24” 24” 6” 6” 12” DF-E-24036-08 DF-E-24036-12 DF-E-24036-16 DF-E-24036-20 DF-E-24036-24 18* 23* 28* 33* 38* 205* 300* 390* 516* 619* Item # Weight (lbs) Buoyancy (lbs) 8” 12” 16” 20” 24” Depth 72” 20” 30” 30” 6” 6” 8” 6” 6” 20”
weights,
buoyancies are
DF-E-16036-12 16* 190* Item # Weight (lbs) Buoyancy (lbs) 12” Depth 36” 16” 5.125” 5.75” 5.125” 36” 16” 48” 30” 9” 12” 9” 24” 12” 12” 48” 30” Eagle Dock Floats™ Eagle Dock Floats™ 800.677.4710 www.DockBuilders.com 12 13

36” x 36” Floats

36” x 48” Floats

*All dimensions, weights, and buoyancies are

36” x 60” Floats

48” x 48” Floats

*All dimensions, weights, and buoyancies are approximate

48” x 60” Floats

*All dimensions, weights, and buoyancies are approximate

48” x 72” Floats

36” x 72” Floats

36” x 96” Floats

36” x 120” Floats

*All dimensions, weights, and buoyancies are approximate

48” x 96” Floats

48” x 120” Floats

Specialty Replacement Float

*All dimensions, weights, and buoyancies are approximate

*All dimensions, weights, and buoyancies are 72” 6” 30” 30” 6” 12” 12” 12” DF-E-36072-12 DF-E-36072-16 DF-E-36072-20 DF-E-36072-24 DF-E-36072-28 DF-E-36072-32 60* 72* 85* 97* 109* 122* 950* 1,270* 1,580* 1,850* 2,150* 2,430* 12” 16” 20” 24” 28” 32” Item # Weight (lbs) Buoyancy (lbs) Depth 72” 36”
120” 12” 24” 24” 24” 24” 12” 12” 12” 12” DF-E-36120-20 DF-E-36120-24 DF-E-36120-32 137* 157* 196* 2,800* 3,350* 4,398* Item # Weight (lbs) Buoyancy (lbs) 20” 24” 32” Depth 120” 36”
48” 24” 12” 12” 24” 12” 12” DF-E-48048-12 DF-E-48048-16 DF-E-48048-20 DF-E-48048-24 DF-E-48048-28 DF-E-48048-32 DF-E-48048-36 54* 64* 75* 86* 97* 108* 119* 850* 1,140* 1,430* 1,680* 1,880* 2,190* 2,450* Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” 24” 28” 32” 36” Depth 48” 48”
*All dimensions, weights, and buoyancies are 96” 6” 18” 24” 18” 6” 24” DF-E-48096-12 DF-E-48096-16 DF-E-48096-20 DF-E-48096-24 DF-E-48096-28 DF-E-48096-32 DF-E-48096-36 102* 122* 142* 162* 182* 202* 223* 1,750* 2,310* 2,910* 3,450* 4,060* 4,440* 5,130* Item # Weight (lbs) Buoyancy (lbs) 12” 16” 20” 24” 28” 32” 36” Depth 96” 48”
Item # Weight (lbs) Buoyancy (lbs) Depth DF-E-48060-12 DF-E-48060-16 DF-E-48060-20 DF-E-48060-24 12” 16” 20” 24” 66* 79* 92* 105* 1,070* 1,420* 1,750* 2,100* 6” 24” 24” 6” 60” 48”
*All dimensions, weights, and buoyancies are 96” 36” 36” 36” 6” 24” 24” 24” 24” 6” 12” 12” 12” DF-E-36096-12 DF-E-36096-16 DF-E-36096-20 DF-E-36096-24 DF-E-36096-28 DF-E-36096-32 DF-E-36096-36 79* 95* 111* 127* 143* 159* 175* 1,250* 1,670* 2,080* 2,540* 2,880* 3,250* 3,730* 12” 16” 20” 24” 28” 32” 36” Item # Weight (lbs) Buoyancy (lbs) Depth 96” 36”
*All dimensions, weights, and buoyancies are Item # Weight (lbs) Buoyancy (lbs) Depth DF-E-48072-12 DF-E-48072-16 DF-E-48072-20 DF-E-48072-24 DF-E-48072-28 DF-E-48072-32 DF-E-48072-36 12” 16” 20” 24” 28” 32” 36” 78* 93* 109* 124* 140* 155* 171* 1,300* 1,720* 2,120* 2,560* 3,030* 3,400* 3,880* 24” 48” 12” 12” 6” 30” 30” 6” 72” 48”
DF-E-48120-20 DF-E-48120-24 DF-E-48120-32 175* 200* 250* 3,800* 4,560* 5,785* Item # Weight (lbs) Buoyancy (lbs) 20” 24” 32” Depth 120” 48”
*All dimensions, weights, and buoyancies are
DF-E-36036-12 DF-E-36036-16 DF-E-36036-28 32* 39* 59* 470* 620* 1,050* Item # Weight (lbs) Buoyancy (lbs) 12” 16” 28” Depth *All
weights, and buoyancies are approximate 36” 12” 12” 12” 12” 12” 12” 36” 36”
dimensions,
24” 12” 12” 48” 48” 24” 12” 12” 120” 12” 24” 24” 24” 24” 12” 48” 24” 12” 12” 12” 12” 12” 36”
DF-E-12048-20 25* 310* Item # Weight (lbs) Buoyancy (lbs) 20” Depth 48” 12” 24” 12” 12” 48” 12”
12” 24” 12” DF-E-36048-08 DF-E-36048-12 DF-E-36048-16 DF-E-36048-18 DF-E-36048-20 DF-E-36048-24 DF-E-36048-28 DF-E-36048-32 33* 41* 50* 54* 59* 67* 76* 85* 460* 620* 820* 960* 1,050* 1,260* 1,450* 1,610* 8” 12” 16” 18” 20” 24” 28” 32” Item # Weight (lbs) Buoyancy (lbs) Depth 48” 36”
*All dimensions, weights, and buoyancies are 60” 6” 24” 24” 6” DF-E-36060-12 DF-E-36060-16 DF-E-36060-20 51* 61* 72* 810* 1,050* 1,310* 12” 16” 20” Item # Weight (lbs) Buoyancy (lbs) Depth 60” 36”
12” 12” 12” Eagle
Eagle
36” 800.677.4710 www.DockBuilders.com 14 15
Dock Floats™
Dock Floats™

Lift Tanks are Designed to Temporarily Lift floating dock sections to allow for repair and replacement of floats as well as for other temporary lift applications. Lift tanks are hollow, onepiece rotationally molded tanks that can be filled with water to submerge, then refloated by evacuating the water and replacing it with air. The shell is made of extra strong virgin polyethylene containing ultraviolet inhibitors, which is available in our heavy wall 0.375” nominal thickness. This tough shell helps prevent damage from the sun, salt water, fresh water, debris, oil, gas, and marine organisms.

Features:

• Molded-In Mounting Holes Around the Top Perimeter

• 1” NPT Threaded Insert for Commercial Fitting

• 3” Diameter Molded-In Hole Outlets in Bottom for Water Intake and Exhaust (We typically ship these uncut and sealed unless otherwise specified, as many of our customers do not want to utilize all outlets for every application.)

• Heavy 0.375” (Nominal) Wall Thickness for Structural Strength

• Custom Sizes Available

34.5” x 96” Lift Tanks

TheFloating Wave Attenuator system provides an affordable way of dissipating wave action around most mooring areas. This two-part system is comprised of a durable double-flanged top float filled with EPS foam and a hollow bottom shell that fills with water, acting as ballast and helping to attenuate the waves. A wood or metal framework can be secured to the top floats to create a wave attenuation barrier to mitigate wave action. Also, some marinas incorporate wave attenuators into their floating dock design for increased utility, or to simply increase the stability the lower shell’s water ballast affords their floating docks.

DF-D-LT-43120-26-.37 DF-D-LT-43120-32-.37 245 280 4,618 5,611 Item # Weight (lbs) Buoyancy (lbs) 26” 32” Depth 43” x 120” Lift Tanks 0.375” 0.375” Wall Thickness
lift tanks
Low Volume Air Blower Recommended <100CFM 21.5”
DF-C-LT-3409630-.37 DF-C-LT-3409636-.37 196 226 2,611 3,175 Item # Weight (lbs) Buoyancy (lbs) 30” 36” Depth 0.375” 0.375” Wall Thickness All dimensions, weights, and buoyancies are approximate 20” 34.5” 20” 20” 20”
48” 36” DF-C-WA-36048-20-DFM 50 NA Item # Weight (lbs) Buoyancy (lbs) 48” 36” Wave Attenuator Hollow Bottom Shell Wave Attenuator Top Float (Foam Filled) DF-C-WA-36048-20-DFF 65 1,088 Item # Weight (lbs) Buoyancy (lbs) 48” 36” 0.200” Wall Thickness 0.200” Wall Thickness 48” 36” All dimensions, weights, and buoyancies are approximate All dimensions, weights, and buoyancies are approximate 12” 12” 12” 12” 12” 12” 12” 12” All dimensions, weights, and buoyancies are approximate 21.5” 21.5” 21.5” 21.5” 43” Lift Tanks Wave Attenuator 800.677.4710 www.DockBuilders.com 16 17

DockBuilders’ Floating Dock Hardware

is designed to help maintain the structural integrity of wood framed floating docks that are subjected to the torquing motion of wind and waves. Unlike upland decks or fixed docks which can be fastened with screws and nails, a floating dock’s frame is subject to torsional stresses that require it to be bolted together. Our framing brackets, hinges, and fasteners provide significant strength and rigidity to the dock frame, thereby adding longer life and increasing the utility of the floating dock. A strong frame will provide a stable platform onto which dock floats and decking materials may be fastened. In addition, a variety of piling hoops, piling guides, and pipe holders provide the means to secure your floating dock.

Features:

• ¼” Thick Steel Construction

• Hot-Dipped Galvanized for Maximum Corrosion Resistance

• Assorted Male / Female Hinges for Connecting Dock Sections

• Specialty Hinges for Gangway Ramps

• Built-in Roller Assemblies on Select Brackets and Piling Hoops/Guides

• Pipe Holders and Piling Hoops Ranging from 3” to 18”

Use this corner at ends of fingers and docks. 3½” on-center hole pattern.

Has one ¾” welded tab (male) for a ¾” pin. Connect to a female tab set.

on-center hole pattern. Install using ½” carriage bolts.

Has two ½” welded tabs (female) for a ¾” pin. Connect to a male tab. 3½” on-center hole pattern. Install using ½” carriage bolts.

Item# OC-F

Has one ¾” welded tab (male) and two ½” welded tabs (female). Connect to (1) female tab set and (1) male tab.

Install using ½” carriage bolts.

Item# OC-MF

Both legs each have one ¾” welded tab (male). Connect to (2) female tab sets. 3½” on-center hole pattern.

Install using ½” carriage bolts.

Both legs have two ½” welded tabs (female). Connect to (2) male tabs.

3½” on-center hole pattern. Install using ½” carriage bolts.

Item# OC-MM

Item# OC-FF

Dock Hardware - Corners
Dock Hardware
Typical Corner Connection Typical Framing Connection 31/8 ” I.D. 8¾” 3½” 3½” 8¾” 5” Item# ICL This Inside Corner should be used with an outside corner. Elongated mounting holes fit up to 3”-thick framing. Install using ½”
bolts. 8¾” 8¾” 5”
(Connector Pin Set) Item# ConPinS
5½” 3”
carriage
Item# PH-3IC Inside Corner with 3” x 12” pipe. Accommodates 2” steel pipe to hold dock in place. Install using ½” carriage bolts.
Use these connector sets for joining male and female hardware tabs.
Item# OC-M
3½”
10¼” 10¼” 5”
10¼” 10¼” 5”
10¼” 10¼” 5”
10¼” 10¼” 5”
10¼” 10¼” 5” Item# OC-E
10¼” 10¼” 5” ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG (¾” x 3½” Bolt Set) Item# HB-34035S Inside Corner Item# ICL Angle Bracket Item# Angle-2.5x5 Outside Corner End Item# OC-E Outside Corner Male Item# OC-M Outside Corner Female Item# OC-F Connector Pin Set Item# ConPinS T-Connector Female Item# T-ConF T-Connector Male Item# T-ConM Chain Retainer Item# ChainRet Pipe Holder 4” Item# PH-4O Pipe Holder 3” Item# PH-3O Washer Plate Item# W-1.5x5 Inside Corner Inside Corner Pipe Holder Outside Corner Male Outside Corner Female Connector Sets Outside Corner Male-Male Outside Corner Female-Female Outside Corner Male-Female Outside Corner End Dock Hardware Dock Hardware - Corners 800.677.4710 www.DockBuilders.com 18 19
Install using ½” carriage bolts.

High Water Low Water Low Water High Water

Stand-Off Bracket Left

4” 4” 4” 3¼” 1½” ¼” Thick HDG

For use with 1½” O.D. galvanized pipe to help hold dock in place. Connection from seawall or fixed dock to floating dock.

Item# PB-LH

Stand-Off Bracket Straight

Stand-Off

Stand-Off Bracket Right

Attachment Kit includes:

1½”

Chain Retainer

Hoop Chain

20” 15” 4” 4” ¼” Thick HDG

x 4½" Carr. Bolts HDG

Washers HDG

Item# PH-AK

Hurricane Straps

Bolts to side of dock. Use chains with weights to hold dock in place. Use with ¼”, ⅜” or ½” chain. Install using ½” carriage bolts.

Item# ChainRet

Hoop Pile Holder

Item# Hoop-Chain

Hoop Pile Holder

¼” Thick HDG

¼” Thick HDG

For use with 1½” O.D. galvanized pipe to help hold dock in place. Connection from seawall or fixed dock to floating dock.

using 3/8” bolts or lags.

Item# PB-S

For use with 1½” O.D. galvanized pipe to help hold dock in place. Connection from seawall or fixed dock to floating dock. Install using 3/8” bolts or lags.

Item# PB-RH

Inside Corner Pipe Holder

¼”

Use these hurricane straps (2” x 18” or 4” x 18”) as needed to help prevent uplift.

Install using ¾” hex bolts.

(2” x 18”) Item# HS-0218

(4” x 18”) Item# HS-0418

Finger Deck Stabilizer

¼” Thick HDG

Our pile hoop holder is constructed with a 1.9” OD pipe that is welded to a 5” plate.

Item# Hoop-08G

Pile Holder

¼” Thick HDG Hoop

Hoop Pile Holder

14”

5” 6” 7” 31/8

Bolts to outside of dock. Use 2” steel pipe to hold dock in place. 3” pipe is 7” long.

Item# PH-3O

8½” 5” 41/8 ” I.D.

Finger Deck Stabilizers

Bolts to outside of dock. Use 3” steel pipe to hold dock in place. 4” pipe is 5” long.

Item# PH-4O

Inside Corner with 3” x 12” pipe. Accommodates 2” steel pipe to hold dock in place. Install using ½” carriage bolts.

Item# PH-3IC

This bracket is designed to help stabilize narrow finger piers.

Install using ½” carriage bolts.

Item# FDS-135

Item# Hoop-12G

Dock Hardware - Mooring 31/8 ” I.D. 8¾” 3½” 3½”
8¾” 5” ¼” Thick
HDG
5” 5” 2” ¼” Thick HDG
3 16” Thick HDG 2” 4” 18”
4” 4” 4” 3” 1½” ¼”
Install
Thick HDG
4” 4” 4” 2” 1½” ¼” Thick HDG
5”
45°
9”
5”
(2)
(4) ½"
(4) ½" Flat
For use with PH-3O and PH-4O. (4) ½" Hex Nuts
x 5” Washer Plates
HDG
Pipe Holder Attachment Kit
Install using 3/8” bolts or lags.
Thick HDG
Install using ½” carriage bolts (Item# PH-AK)
Pipe Holder 4”
I.D.
Pipes
Install using ½” carriage bolts (Item# PH-AK)
¼” Thick HDG
Pipe Holder 3”
Stand-Off Pipe Use
Stand-Off Mooring Pipe/Piling Mooring
Adjustable chain hoop pile holder with ⅜” galvanized chain and shackles. For use with up to 13” diameter pole. Install using ½” carriage bolts.
8” 16½” 8” 5”
Install using ½” carriage bolts.
12” 20½” 12” 5”
Our pile hoop holder is constructed with a 1.9” OD pipe that is welded to a 5” plate. Install using ½” carriage bolts.
Item# Hoop-14G
22½” 14” ¼” Thick HDG 5”
Our pile hoop holder is constructed with a 1.9” OD pipe that is welded to a 5” plate. Install using ½” carriage bolts.
Item# Hoop-10G
10” 18½” 10” 5” Dock Hardware - Mooring Dock Hardware - Mooring 800.677.4710 www.DockBuilders.com 22 23
Our pile hoop holder is constructed with a 1.9” OD pipe that is welded to a 5” plate. Install using ½” carriage bolts.

Deck plate is made from 4” x 6” x ¼” HDG steel.

The detachable HDG hoop is 1.9” OD pipe.

6” long solid UHMW roller.

Install using ½” carriage bolts.

Deck plate is made from 4” x 6” x ¼” HDG steel.

The detachable HDG hoop is 1.9” OD pipe.

6” long solid UHMW roller.

Install using ½” carriage bolts.

Item# Hoop-RA10

Item# Hoop-RA12

Deck plate is made from 4” x 6” x ¼” HDG steel.

The detachable HDG hoop is 1.9” OD pipe.

6” long solid UHMW roller.

Install using ½” carriage bolts.

Deck plate is made from 4” x 6” x ¼” HDG steel. The detachable HDG hoop is 1.9” OD pipe.

Item# Hoop-RA14

Deck plate is made from 4” x 6” x ¼” HDG steel. The detachable HDG hoop is 1.9” OD pipe.

Deck plate is made from 4” x 6” x ¼” HDG steel. The detachable HDG hoop is 1.9” OD pipe.

(Open Hoop) Item# Hoop-HO10 (Open Hoop) Item# Hoop-HO12 (Open Hoop) Item# Hoop-HO14

(Deck Plate) Item# Hoop-DP10

(Deck Plate) Item# Hoop-DP12

(Deck Plate) Item# Hoop-DP14

Deck plate is made from 4” x 6” x ¼” HDG steel. The detachable HDG hoop is 1.9” OD pipe.

6” long solid UHMW roller.

Install using ½” carriage bolts.

Deck plate is made from 4” x 6” x ¼” HDG steel.

The detachable HDG hoop is 1.9” OD pipe.

6” long solid UHMW roller.

Item# Hoop-RA16

Our internal pile guides are made from 3” x 3” x ¼” HDG steel angle.

6” long solid UHMW rollers.

Deck plate is made from 4” x 6” x ¼” HDG steel. The detachable HDG hoop is 1.9” OD pipe.

Deck plate is made from 4” x 6” x ¼” HDG steel. The detachable HDG hoop is 1.9” OD pipe.

11”

6” UHMW Roller

Our internal pile guides are made from 3” x 3” x ¼” HDG steel angle.

6” long solid UHMW rollers.

Install using ½” carriage bolts (fits 16” x 16” cut-out).

Item# IPG-12

Install using ½” carriage bolts. Item# IPG-09

Item# Hoop-RA18

Install using ½” carriage bolts (fits 13” x 13” cut-out).

(Open Hoop) Item# Hoop-HO16 (Open Hoop) Item# Hoop-HO18

(Deck Plate) Item# Hoop-DP16

(Deck Plate) Item# Hoop-DP18

Our internal pile guides are made from

3” x 3” x ¼” HDG steel angle.

6” long solid UHMW rollers.

Install using ½” carriage bolts (fits 19” x 19” cut-out).

Item# IPG-15

Our internal pile guides are made from 3” x 3” x ¼” HDG steel angle.

6” long solid UHMW rollers.

Install using ½” carriage bolts (fits 22” x 22” cut-out).

Item# IPG-18

HDG bracket for roller assembly.

Designed for 5/8 ” stainless steel axle.

Install using ½” hex or carriage bolts.

Item# R-611B

6” long replacement roller made of ultra high molecular weight, UHMW plastic. Extremely strong and durable vs standard rubber & plastics.

Designed for 5/8” stainless steel axle.

Item# R-2.5x6UHMW

Heavy duty roller assembly can be added to aid up-and-down motion of the dock in areas with tidal action. (Includes: bracket, roller, SS axle, and cotter pins) Install using ½” hex or carriage bolts.

Item# RA

5/8 ” x 8” stainless steel axle pin and 5/32 ” x 1¼” cotter pins SS 18-8 for roller assembly.

(Cotter Pin) Item# CotterPinS

(Axle) Item# Axle-5808SS

Replacement Parts

2½”
2½” 11” 6” 2 5/8 ” O.D. 8” 5/8 ” 41/3 ” ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG ¼” Thick HDG Pile Hoop 12” Parts Pile Hoop 14” Parts Pile Hoop 18” Parts Pile Hoop 16” Parts Pile Hoop 10” Parts Roller Assembly Roller Axle & Cotter Pins Replacement Roller Roller Bracket Internal Pile Guide 9” Internal Pile Guide 12” Internal Pile Guide 15” Internal Pile Guide 18” 12” Hoop Assembly W/ Roller 14” Hoop Assembly W/ Roller 18” Hoop Assembly W/ Roller 16” Hoop Assembly W/ Roller 10” Hoop Assembly W/ Roller 11/16”I.D. UHMW ROLLER 26½” 18” 24½” 16” 20½” 12” 18½” 10” 22½” 14” 6” 4” 6” 4” 6” 4” 6” 6” 4” 4” 18” 18” 21” 21” 24” 24” 27” 27” 18” 9” 12” 15” 26½” 18” 24½” 16” 20½” 12” 18½” 10” 22½” 14” 6” 4” 6” 4” 6” 4” 6” 4” 6” 4” Dock Hardware - Mooring Replacement Parts 800.677.4710 www.DockBuilders.com 24 25

Our Aluminum Gangways are constructed with marine-grade aluminum and built to last in harsh saltwater environments. They feature frame welded, truss-style handrails for increased strength and non-slip knurled aluminum decking panels for safety.

Standard Features:

• Heavy Duty Piano Hinge at Top

• Heavy Duty UHMW Wheels at BottomWheels Allow for Ramp Movement Due to Water Level Fluctuation

• Skid-Resistant Surface

• 42” High Handrails

• Extended Handrail Safety Hoops at Top of Gangway

• Welded Handrails, Posts, & Diagonal Bracing for Strength

Gangway Options:

Water Stanchion Single

Extruded, marine-grade aluminum stanchion with cast-aluminum hose holder and single hose

• Custom Widths & Lengths

• Double-Hinged Ramps

• Transition Apron Plate

• ADA-Compliant Gangways

• SunWalk Decking Panels

• Vertical Picket Guard Rails

• Frame-Welded Lifting Tabs to Move Gangway

• Walking Strips for Steep Inclines/Declines

Hose Holders

• 6061 Marine-Grade Aluminum Frame & Support 0° Ramp Slope

What Size Gangway Do I Need?

Optional transition apron plate for hand-truck access with micro wheels

The minimum suggested length is 3-5x the maximum typical drop (including water fluctuation) expected at the landing.

• Special Load-Rating Fabrication

Aluminum

Contact us for special requirements, pedestrian bridges, or other custom designs.

Aluminum Gangways

Extruded, marine-grade aluminum stanchion with cast-aluminum hose holder and single hose bibb. Powder coated white exterior.

Post: 4” x 4”

Base Plate: 8” x 8”

Holds up to a 75’ hose

Standard Height: 36”

Extruded, marine-grade aluminum stanchion with two cast-aluminum hose holders and two hose bibbs. Powder coated white exterior.

Post: 4” x 4”

Base Plate: 8” x 8” Holds up to two 75’ hoses

Water Stanchion Double Water Stanchion Single

Extruded, marine-grade aluminum stanchion with cast-aluminum hose holder and single water connection. Powder coated white exterior.

Standard Height: 28½”

Post: 3” x 3”

Base Plate: 6” x 6”

Holds up to a 50’ hose

28½” 28½”

Extruded, marine-grade aluminum stanchion with two cast-aluminum hose holders and two water connections. Powder coated white exterior.

Standard Height: 28½”

Post: 3” x 5”

Base Plate: 6” x 6”

Holds up to two 50’ hoses

Item# WS-IDP-S Item# WS-IDP-D

Water Stanchion Double Water Stanchion Single Water Stanchions

10°
8’ 10’ 12’ 14’ 16’ 18’ 20’ 8’ 10’ 12’ 14’ 16’ 18’ 20’ 8’ 10’ 12’ 14’ 16’ 18’ 20’ 8’ 10’ 12’ 14’ 16’ 18’ 20’ 1’ Drop 2’ Drop 3’ Drop 4’ Drop 5’ Drop 6’ Drop 7’ Drop 8’ Drop 9’ Drop 10’ Drop ~7’ (@4’ drop) ~8¾’ (@5’ drop) ~10½’ (@6’ drop) ~12¼’ (@7’ drop) ~13¾’ (@8’ drop) ~15½’ (@9’ drop) ~17¼’ (@10’ drop)
30°RampSlope20°RampSlope
Ramp Slope
Standard Height: 36” Holds 50’-75’ Hose Holds 50’-75’ Hose Custom sizes & colors available call for details
Aluminum Finish Item# HH-L-Alum Holds 50’-75’ Hose Custom colors available call for details Custom sizes & colors available call for details Holds 50’ Hose Holds 50’ Hose
bibb.
exterior. Post: 4” x 4” Base Plate: 8” x 8” Holds up to a 75’ hose Standard Height: 36” Holds 50’-75’ Hose Custom sizes & colors available call for details 36” Item# WS-03-S-Black Custom colors available call for details 36” 36” Item# WS-03-S-White Item# WS-03-D-White Item# HH-L-W-White GW-03-08 GW-03-10 GW-03-12 GW-03-14 GW-03-16 GW-03-18 GW-03-20 GW-03-22 GW-03-24 GW-03-26 GW-03-28 GW-03-30 GW-03-32 3’ Wide Item# 8’ 10’ 12’ 14’ 16’ 18’ 20’ 22’ 24’ 26’ 28’ 30’ 32’ Length GW-04-08 GW-04-10 GW-04-12 GW-04-14 GW-04-16 GW-04-18 GW-04-20 GW-04-22 GW-04-24 GW-04-26 GW-04-28 GW-04-30 GW-04-32 4’ Wide Item#
Powder coated black
800.677.4710 www.DockBuilders.com 26 27
Gangways Aluminum Gangways Water Stanchions

Ladders Ladders

DockBuilders’ Dock Ladders

are made from 6063 T5 marine-grade aluminum and are suitable for fresh and salt water environments. Extruded, grooved, and welded ladder rungs provide a firm grip and easy climbing access, making them the perfect choice for seawalls, fixed docks, and floating docks.

All ladders are available with standard 2” deep steps or 3½” deep steps for added comfort:

2”Steps

Mounting Hardware

Quick Disconnect Brackets allow you to quickly disconnect and store your ladder. Ideal for seasonal usage! Also ideal for emergency access where a straight ladder is needed, but marine growth prohibits a permanent installation. Works with all ladders except finger-pier and swing style. Constructed from 6063 T-5 marine-grade aluminum.

Lift Ladder

Floating Dock Lift Ladder

The Lift Ladder is an innovative, retractable ladder. To extend the life of the ladder, simply pull up the lower section above the water line to help eliminate marine growth. The plastic coated lift cable helps provide long-lasting service.

Recommended for seawalls and fixed docks in salt water environments where mean high water is lower than 26” below deck.

3½”Steps

Most ladder installations require the use of [4] tap bolts, [8] flat washers, [4] lock washers, and [4] hex nuts. For docks with double outside stringers, you will likely need [2] lag bolts, [2] tap bolts, [6] flat washers, [2] lock washers, and [2] hex nuts.

Note: All ladders should be cleared of freezing water to prevent damage to the ladder and dock.

Straight Ladder Swing Ladder

The Straight Ladder, perfect for seawalls and fixed docks, makes climbing in and out of the water a breeze. The variety of standard lengths will accommodate most installations.

Recommended for fresh water environments and areas of minimal marine growth.

The Straight Swing Ladder is a classic innovation that allows you to swing the ladder completely above the dock when not in use. A locking pin mechanism locks ladder in either up or down positions.

Recommended for fresh or salt water environments.

800.677.4710

The Floating Dock Lift Ladder is an innovative, SHORT base retractable ladder. To extend the life of the ladder, simply pull up the lower section above the water line to help eliminate marine growth. The plastic coated lift cable helps provide long-lasting service.

Recommended for floating docks in salt water environments where water level is lower than 14” below deck.

Note: All ladders should be cleared of freezing water to prevent damage to the ladder and dock.

Finger Pier Lift Ladder

The Finger Pier Lift Ladder is an innovative, retractable ladder that only takes up 8” on the dock. This design makes it ideal for use on narrower fixed docks and walkways. To extend the life of the ladder, simply pull up the lower section above the water line to help eliminate marine growth. The plastic coated lift cable helps provide longlasting service.

Recommended for narrow walkways on fixed docks in salt water environments where mean high water is lower than 26” below deck.

Floating Dock Finger Pier Lift Ladder

The Floating Dock Finger Pier Lift Ladder is an innovative, SHORT base retractable ladder that only takes up 8” on the dock, which makes it ideal for use on narrower floating docks and walkways. To extend the life of the ladder, simply pull up the lower section above the water line to help eliminate marine growth. The plastic coated lift cable helps provide long-lasting service.

Recommended for narrow walkways on floating docks in salt water environments where water level is lower than 14” below deck.

Ladders Ladders

12” 22” 36” 23”
L-A1-S3 L-A1-S4 L-A1-S5 L-A1-S6 L-A1-S7 3 4 5 6 7 L-A1-S3W* L-A1-S4W L-A1-S5W L-A1-S6W L-A1-S7W L-A1-QD* L-A1-SW3 L-A1-SW4 L-A1-SW5 L-A1-SW6 L-A1-SW7 2” Steps Item# L-A1-SW3W* L-A1-SW4W L-A1-SW5W L-A1-SW6W L-A1-SW7W Wide Steps Item# L-A1-FPL4 L-A1-FPL5 L-A1-FPL6 L-A1-FPL7 4 5 6 7 2” Steps Item# Step Count L-A1-FPL4W L-A1-FPL5W* L-A1-FPL6W L-A1-FPL7W Wide Steps Item# L-A1-FDFPL4 L-A1-FDFPL5 L-A1-FDFPL6 L-A1-FDFPL7 4 5 6 7 2” Steps Item# Step Count L-A1- FDFPL4W* L-A1- FDFPL5W L-A1- FDFPL6W L-A1- FDFPL7W Wide Steps Item# L-A1-L4 L-A1-L5 L-A1-L6 L-A1-L7 2” Steps Item# L-A1-L4W L-A1-L5W* L-A1-L6W L-A1-L7W L-A1-FDL4 L-A1-FDL5 L-A1-FDL6 L-A1-FDL7 4 5 6 7 2” Steps Item# Step Count L-A1-FDL4W* L-A1-FDL5W L-A1-FDL6W L-A1-FDL7W Wide Steps Item# Dimensions are approximate. *Model Shown: L-A1- FDFPL4W *Model Shown: L-A1-FDL4W *Model Shown: L-A1- FPL5W *Model Shown: L-A1- L5W *Model Shown: L-A1-SW3W Dimensions are approximate. Dimensions are approximate. Dimensions are approximate. *Also available with finger pier mounts *Design may vary. 3’ 4’ 5’ 6’ Max. Reach 3’ 4’ 5’ 6’ Max. Reach 4 5 6 7 Step Count 4’ 5’ 6’ 7’ Max. Reach Wide Steps Item# Max. Reach 4’ 5’ 6’ 7’ 3 4 5 6 7 Step Count 3’ 4’ 5’ 6’ 7’ 3’ 4’ 5’ 6’ 7’ Max. Reach HN-12SS W-12SSL W-12SS TB-1204SS LB-1204SS *Model Shown: L-A1-S3W 2” Steps Item# Wide Steps Item# Step Count Max. Reach Dimensions are approximate. Dimensions are
approximate.
Ladder-AK-A Ladder-AK-B Ladder-AK-C Item# 4 2 - Tap Bolts Lag Bolts2 4 Flat Washers 8 6 4 Lock Washers 4 2Hex Nuts 4 2Stainless steel fastening hardware is recommended. 14” 22” 12” 8” 8” 14” 24” 22” 26” 24” 12” 22” 14” 26” 22” 26” 26” 22” 36” 23”
www.DockBuilders.com 28 29

DockBuilders’

piling caps are an excellent and inexpensive way to protect costly pilings from internal rot. Our caps are made from UV-stabilized polypropylene (polyethylene for >16” caps) and are available in ½” increments ranging from 5” to over 18” in diameter. Choose from round cone or round flat, in either black or white. The cone design helps to discourage birds from landing on them.

In addition to the round piling caps, we also offer square piling caps (cone or flat) in many sizes ranging from 3½” to 20”. Our black piling caps have an estimated life of fifteen years, while our white caps have an estimated life of nine years, though the actual life of the piling caps are not guaranteed.

Round Cone Round Flat

Piling Wrap Helps Protect Your Pilings

from marine borers. Our piling wrap is black in color and is a UV stabilized high density polyethylene material that is 0.030” thick and is available in 36”, 48” and 60” widths.

Heavier duty 0.060” thick wrap is also available in 48” and 60” widths.

The 60” wide wrap usually works well in most shallow water applications when only one 60” wide band of wrap around each piling is needed. In deeper waters, or on applications where you need to wrap more than 60” of the piling, you may want to consider using our 36” or 48” wide wrap vertically as an option for any length you desire.

Piling Wrap 36” Wide

Piling Wrap 48” Wide

To determine how much piling wrap you need, calculate the circumference (diameter x 3.14) of each piling and add 4-6” for overlap.

Square Cone

Square Flat

Removing Barnacles Prior to Installation is Necessary. See page 67 for our

Marine Wood Borers

Damage by marine-boring organisms to wood structures in salt or brackish water is a common worldwide problem. The rate of infestation and subsequent deterioration depends on local conditions and the types of borers present. The greatest damage in a piling usually occurs just above the mud line, although entrance holes may be found throughout the submerged area.

Piling wrap is a very cost-effective solution for deterring marine borers. Properly installed piling wrap can greatly slow the rate of infestation and subsequent deterioration.

Stainless Steel (316) Nails

We recommend installing the wrap using 1¼-1½” type 316 stainless steel ring-shank roofing nails every 1½-2” along the seams.

salt water)

Item#

N-03DSS316-01

N-03DSS316-05

N-04DSS316-01

N-04DSS316-05

1¼” SS Type-316 1 lb (175ct.) 1¼” SS Type-316 5 lb (875ct.) 1½” SS Type-316 1 lb (130ct.) 1½” SS Type-316 5 lb (650ct.) Description

Caps
Piling
Piling Wrap 48” Cable Ties ITEM# PW-CT48 48” Cable Ties (175lbs) hold pile wrap temporarily in place for easy nailing. 3½”x3½” 3½”x5½” 5½”x5½” 6”x6” Size (Inches) PC-DB-BC-SQ03.5 PC-DB-BC-SQ03.5x5.5 PC-DB-BC-SQ05.5 PC-DB-BC-SQ06 Item# (Black) PC-DB-WC-SQ03.5 PC-DB-WC-SQ03.5x5.5 PC-DB-WC-SQ05.5 PC-DB-WC-SQ06 Item# (White) 3½”x3½” 3½”x5½” 5½”x5½” 6”x6” PC-DB-BF-SQ03.5 PC-DB-BF-SQ03.5x5.5 PC-DB-BF-SQ05.5 PC-DB-BF-SQ06 PC-DB-WF-SQ03.5 PC-DB-WF-SQ03.5x5.5 PC-DB-WF-SQ05.5 PC-DB-WF-SQ06 Item# (White)
(Black Line Holder) Item# LineHoldB (White Line Holder) Item# LineHoldW (60D 6” HDG Common Nails) Item# N-60DGC-P (60D 6” S.S. Common Nails) Item# N-60DSS304R-P Line Holders (Rope Catch) 1¼” SS 304 Roofing Nails (90ct.) Item# N-03DSS304AR-0.5 Piling Cap Nails Size (Inches) Item# (Black) Size (Inches) Item# (Black) Item# (White) Item# (Black) Item# (White) Size (Inches) 5” 5½” 6” 6½” 7” 7½” 8” 8½” 9” 9½” 10” 10½” 11” 11½” 12” 12½” 13” 13½” 14” 14½” 15” 15½” 16” 16½” 17” 17½” 18” PC-DB-BC-05.0 PC-DB-BC-05.5 PC-DB-BC-06.0 PC-DB-BC-06.5 PC-DB-BC-07.0 PC-DB-BC-07.5 PC-DB-BC-08.0 PC-DB-BC-08.5 PC-DB-BC-09.0 PC-DB-BC-09.5 PC-DB-BC-10.0 PC-DB-BC-10.5 PC-DB-BC-11.0 PC-DB-BC-11.5 PC-DB-BC-12.0 PC-DB-BC-12.5 PC-DB-BC-13.0 PC-DB-BC-13.5 PC-DB-BC-14.0 PC-DB-BC-14.5 PC-DB-BC-15.0 PC-DB-BC-15.5 PC-DB-BC-16.0 PC-DB-BC-16.5 PC-DB-BC-17.0 PC-DB-BC-17.5 PC-DB-BC-18.0 PC-DB-WC-05.0 PC-DB-WC-05.5 PC-DB-WC-06.0 PC-DB-WC-06.5 PC-DB-WC-07.0 PC-DB-WC-07.5 PC-DB-WC-08.0 PC-DB-WC-08.5 PC-DB-WC-09.0 PC-DB-WC-09.5 PC-DB-WC-10.0 PC-DB-WC-10.5 PC-DB-WC-11.0 PC-DB-WC-11.5 PC-DB-WC-12.0 PC-DB-WC-12.5 PC-DB-WC-13.0 PC-DB-WC-13.5 PC-DB-WC-14.0 PC-DB-WC-14.5 PC-DB-WC-15.0
PC-DB-WC-18.0 PC-DB-BF-05.0 PC-DB-BF-05.5 PC-DB-BF-06.0 PC-DB-BF-06.5 PC-DB-BF-07.0 PC-DB-BF-07.5 PC-DB-BF-08.0 PC-DB-BF-08.5 PC-DB-BF-09.0 PC-DB-BF-09.5 PC-DB-BF-10.0 PC-DB-BF-10.5 PC-DB-BF-11.0 PC-DB-BF-11.5 PC-DB-BF-12.0 PC-DB-BF-12.5 PC-DB-BF-13.0 PC-DB-BF-13.5 PC-DB-BF-14.0 PC-DB-BF-14.5 PC-DB-BF-15.0 PC-DB-BF-15.5 PC-DB-BF-16.0 PC-DB-BF-16.5 PC-DB-BF-17.0 PC-DB-BF-17.5 PC-DB-BF-18.0 PC-DB-WF-05.0 PC-DB-WF-05.5 PC-DB-WF-06.0 PC-DB-WF-06.5 PC-DB-WF-07.0 PC-DB-WF-07.5 PC-DB-WF-08.0 PC-DB-WF-08.5 PC-DB-WF-09.0 PC-DB-WF-09.5 PC-DB-WF-10.0 PC-DB-WF-10.5 PC-DB-WF-11.0 PC-DB-WF-11.5 PC-DB-WF-12.0 PC-DB-WF-12.5 PC-DB-WF-13.0 PC-DB-WF-13.5 PC-DB-WF-14.0 PC-DB-WF-14.5 PC-DB-WF-15.0 PC-DB-WF-15.5 PC-DB-WF-16.0 PC-DB-WF-16.5 PC-DB-WF-17.0 PC-DB-WF-17.5 PC-DB-WF-18.0 5” 5½” 6” 6½” 7” 7½” 8” 8½” 9” 9½” 10” 10½” 11” 11½” 12” 12½” 13” 13½” 14” 14½” 15” 15½” 16” 16½” 17” 17½” 18” 1¼” SS 305
(100ct.)
Wrap 60” Wide Description Item# 0.03” Thick - 20’ Roll 0.03” Thick - 30’ Roll 0.03” Thick - 40’ Roll 0.03” Thick - 50’ Roll 0.03” Thick - 60’ Roll 0.03” Thick - 300’ Roll 0.06” Thick - 30’ Roll 0.06” Thick - 150’ Roll PW-6030-020 PW-6030-030 PW-6030-040 PW-6030-050 PW-6030-060 PW-6030-300 PW-6060-030 PW-6060-150
PC-DB-WC-15.5 PC-DB-WC-16.0 PC-DB-WC-16.5 PC-DB-WC-17.0 PC-DB-WC-17.5
Screws
Item#S-1.25SS305T25-0100 Piling Cap Screws Piling
Description Item# 0.03” Thick - 40’ Roll 0.03” Thick - 60’ Roll 0.03” Thick - 80’ Roll 0.03” Thick - 300’ Roll 0.06” Thick - 20’ Roll 0.06” Thick - 30’ Roll 0.06” Thick - 40’ Roll 0.06” Thick - 150’ Roll PW-4830-040 PW-4830-060 PW-4830-080 PW-4830-300 PW-4860-020 PW-4860-030 PW-4860-040 PW-4860-150
Description Item# 0.03” Thick - 50’ Roll 0.03” Thick - 75’ Roll 0.03” Thick - 100’ Roll 0.03” Thick - 300’ Roll PW-3630-050 PW-3630-075 PW-3630-100 PW-3630-300
Barnapole Scraping Tool.
*Stainless Type 304 also available (not recommended for
Piling Caps Piling Wrap 800.677.4710 www.DockBuilders.com 30 31 *For larger sizes, please call or visit our website *For larger sizes, please call or visit our website *For larger sizes, please call or visit our website *For larger sizes, please call or visit our website

Dock Bumpers Dock Bumpers

DockBuilders’

EdgePro® Marine Dock Edging is manufactured from marine-grade flexible PVC for use on residential and commercial docks. Our durable dock edging products provide an effective protective buffer between boats and the edges of the dock. EdgePro® Marine Dock Edging is colored all the way through, unlike competitive products that “skin coat” the top surface. This feature reduces the likelihood of any visual effects from scuffing or abrasion. Our marine dock edging is engineered not to crack, rot, or deteriorate when exposed to temperature extremes and is unaffected by oil, gasoline, or saltwater. The products also contain UV inhibitors to help prevent yellowing and deterioration.

Small Commercial Grade P-Shape

Large Commercial Grade P-Shape

Mounts Horizontally Mounts Horizontally

Commercial Grade D-Shape

Corner P-Shape 10”x 10” Corner Bumper 10” x 10”

Fasteners

For most applications, we recommend spacing screws and washers approximately every 6-8” (26-34 pcs. per 8’ section).

Screws

Dock Bumpers

• Made From Tough Marine-Grade Vinyl

• Protects Side & 1¼” of Dock Top

• Solid Flaps Attach Easily to Any Dock

• Inside Dimensions Cover 9” on Each Leg

Washers

Dock Pro TM Inflatable Dock Wheels

Straight Ladder

Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness.

Heavy duty, hotdipped galvanized hardware mounts securely to the dock.

12” and 18” wheels use a large 2” diameter axle housing for maximum strength.

Dock Pro

Inflatable Dock Wheels

Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness.

Heavy duty, hotdipped galvanized hardware mounts securely to the dock.

12” and 18” wheels use a large 2” diameter axle housing for maximum strength.

Straight Ladder

Dock Pro TM Inflatable Heavy Duty Vinyl Dock Bumpers

Dock Pro heavy duty, vinyl bumpers are ideal for rough conditions, and can take a beating. Made from UV resistant, marine-grade vinyl, they provide excellent protection for your boat and dock. Straight piece can be mounted horizontally or vertically. Corner piece provides superior impact protection on dock corners. Both bumpers have inflation valves for easy adjustment to desired firmness. Pre-drilled for easy, permanent mounting.

VE-D-5001B-08
Item# VE-D-5001W-08 (White) Item# VE-D-5002B-08 (Black) Item# VE-D-5002W-08 (White) Item# VE-D-5007B-08 (Black) Item# VE-D-5007W-08 (White) Item# VE-B-C10B (Black) Item# VE-B-C10W (White) Item# VE-TMP-C10B (Black) Item# VE-TMP-C10W (White) #10 x 1¼” Stainless Steel Screws 100ct. Item# S-1.25SS305T25-0100 Item# W-#10FinishSS-0100 #10 Stainless Steel Finish Washers 100ct. 31/8”H x 21/8”D x 8’L 31/2”H x 23/8”D x 8’L 33/4”H x 11/8”D x 8’L Approximate Dimensions Approximate Dimensions Approximate Dimensions
Item#
(Black)
Item# Diam. DW-TMP-1079 DW-TMP-1073 DW-TMP-1082 9” Wheel 12” Wheel 18” Wheel Size <20’ Boat 20’-30’ Boat 30’-45’ Boat
Item# VE-TMP-IDB-S VE-TMP-IDB-C Description Inflatable Heavy Duty Vinyl Bumper Straight Mount - 35½”L x 3”W x 5½”H Inflatable Heavy Duty Vinyl Bumper Corner Mount - 12”L x 12”W x 5½”H
Item# Diam. DW-TMP-1078 DW-TMP-1072 DW-TMP-1081 9” Wheel 12” Wheel 18” Wheel Size <20’ Boat 20’-30’ Boat 30’-45’ Boat Corner Mount Straight Mount
TM
Custom Lengths Available for Volume Orders - Call for Details 3 1/2” 3 1/8” 3 3/4” 2 1/8” 2 3/8” • Made From Tough Marine-Grade Vinyl • Outside Corners End at a 90° Corner • Structural Ribs Inside Provide Impact Resistance • Inside Dimensions Cover 9” on Each Leg
Typically paired with 5001 & 5002 P-Shape bumper series above 800.677.4710 www.DockBuilders.com 32 33
Mounts Horizontally or Vertically

Flexmaster Dock Fenders

Features:

Flexmaster Fenders Unmounted

Recycled Plastic Lumber Fender Brackets

• Extruded from a Special PVC Compound

• Black Will Not Mark Boat

• Designed to Mount to Any Nominal 2x4 (1.5”x3.5”) or 4x4 (3.5”x3.5”)

• UV Resistant; Not Affected by Marine Borers or Barnacles

• For Boats up to 90’ in Length

are ideal for rough conditions and are designed to handle most boats ranging from 30’ to 90’. They are extruded from a special PVC compound that is UV resistant and won’t be affected by marine borers or barnacles. Choose from black or white color, neither will mark your boat. Flexmaster Fenders are designed to mount to any nominal 2” x 4” or 4” x 4” pressure treated or plastic lumber. Flexmaster end caps may also be added to dress up your fender installation, giving it a clean, professional look. Custom aluminum mounting brackets are also available for docks without raised pilings.

Flexmaster Fender only. Does not include end cap or recycled lumber.

Flexmaster End Caps

Shown with:

• FM-RPB-06-24

Flexmaster Fenders 2x4 Mounted

Flexmaster Dock

*Fully assembled and mounted fender Includes:

Fender

End Cap

Plastic Lumber

Shown with:

• FM-M-06B-44

• FM-BR05

Constructed from Marine-grade 6061 Aluminum, these fender brackets are perfect for use in lieu of piling. Each standard channel width is 4” to accommodate nominally sized 4x4 (3.5”x3.5”) board.

Custom

also available.

Note: mounting face holes are required for pre-mounted Flexmasters

FM-M-06B-44 FM-M-08B-44 FM-M-10B-44 FM-M-12B-44 Item# black FM-M-06W-44 FM-M-08W-44 FM-M-10W-44 FM-M-12W-44 Item# white
1-Flexmaster
1-Flexmaster
Cap 1-Recycled Plastic Lumber 4x4 6’ 8’ 10’ 12’ Description
Flexmaster Fenders 4x4 Mounted
*Fully assembled and mounted fender Includes:
Fender
End
FM-M-06B-24 FM-M-08B-24 FM-M-10B-24 FM-M-12B-24 Item# black FM-M-06W-24 FM-M-08W-24 FM-M-10W-24 FM-M-12W-24 Item# white
1-Recycled
6’ 8’ 10’ 12’ Description
1-Flexmaster
1-Flexmaster
2x4
• FM-06B • FM-ECB
6’ 8’ 10’ 12’ Description FM-06B FM-08B FM-10B FM-12B Item# black FM-06W FM-08W FM-10W FM-12W Item# white
FM-ECB Item# black FM-ECW Item# white 3’ (1’ Up & 2’ Down) 5’ (2’ Up & 3’ Down) Description FM-BR03 FM-BR05 Item# End Cap Description
lengths
Flexmaster End Caps are designed for use with 4x4 (3.5”x3.5”) lumber*. Description Item# 2x4 - 6’ Long R.P.L. 2x4 - 8’ Long R.P.L. 2x4 - 10’ Long R.P.L. 2x4 - 12’ Long R.P.L. 4x4 - 6’ Long R.P.L. 4x4 - 8’ Long R.P.L. 4x4 - 10’ Long R.P.L. 4x4 - 12’ Long R.P.L. FM-RPL-06-24 FM-RPL-08-24 FM-RPL-10-24 FM-RPL-12-24 FM-RPL-06-44 FM-RPL-08-44 FM-RPL-10-44 FM-RPL-12-44 *can be cut for 2x4 (1.5”x3.5”) lumber. 6¾” 6¾” 5” 4¼” 4¾” 4” 4¼” 5” 4¼” 6¾” 3½” 1½” 3½” 3½” 10” 8”
800.677.4710 www.DockBuilders.com 34 35
Flexmaster Dock Fenders Flexmaster Dock Fenders

The SlideMoor™ Floating Dock Mooring System

“FDB” is the evolution for securing floating docks. The SlideMoor FDB is a better alternative to hoops, rollers, or any other mechanical attachment. Using the SlideMoor Patented Technology, the FDB is easily fixed to pilings or seawalls, and provides a secure, long-lasting fastening system for your floating dock.

SlideMoor™ is a boat docking system that brings together many of the advantages of a floating dock with the appeal of a traditional fixed dock. The system makes docking safer and easier while mitigating the risks associated with tidal change, wind, and wave activity.

The SlideMoor FDB can be mounted either to the top or side of the floating dock. The 18 inch FDB is typically used for midsized & commercial docks.

Please review the SlideMoor™ page on our Website for details.

18” SlideMoor FDB

SlideMoor™ takes the guesswork out of tying up your boat, solving many of the docking and mooring issues encountered by boaters. This simple, yet effective system, secures your boat tightly to a sliding bumper on one side only. Fastened to your piling, marine-grade aluminum tracks are available in lengths up to 25 feet to accommodate most tidal swings.

SlideMoor™ eliminates the need for fenders, bumpers, spring-lines, bow-lines, stern-lines, mooring whips, and outer tie pilings.

The vertical motion caused by waves and tides moves the maintenance-free slide up and down with the boat. Lateral movement is practically eliminated with the system. Loading and unloading becomes safer and easier because the boat is tied tightly to the SlideMoor™ bumper, merely inches from your dock.

Please review the SlideMoor™ page on our Website for details.

24” SlideMoor FDB

30”

Plus

Mooring
Products
18” SlideMoor Plus < 30’ Y Beam (for Piling Mount) Item# SM-PLUS-18-Y08 SM-PLUS-18-Y10 SM-PLUS-18-Y12 SM-PLUS-18-Y14 SM-PLUS-18-S08 SM-PLUS-18-S10 SM-PLUS-18-S12 SM-PLUS-18-S14 X X X X--
SlideMoor
Y Beam (for Piling Mount) Item# SM-PLUS-30-Y08 SM-PLUS-30-Y10 SM-PLUS-30-Y12 SM-PLUS-30-Y14 SM-PLUS-30-S08 SM-PLUS-30-S10 SM-PLUS-30-S12 SM-PLUS-30-S14 X X X X--
SlideMoor Plus < 60’ Y Beam (for Piling Mount) Item# SM-PLUS-24-Y08 SM-PLUS-24-Y10 SM-PLUS-24-Y12 SM-PLUS-24-Y14 SM-PLUS-24-S08 SM-PLUS-24-S10 SM-PLUS-24-S12 SM-PLUS-24-S14 X X X X-I-Beam (for Flat Mount)-X X X X I-Beam (for Flat Mount)-X X X X I-Beam (for Flat Mount)-X X X X Track Length 8’ 10’ 12’ 14’ 8’ 10’ 12’ 14’ Track Length 8’ 10’ 12’ 14’ 8’ 10’ 12’ 14’ Track Length 8’ 10’ 12’ 14’ 8’ 10’ 12’ 14’
< 90’
24”
Y-Beam (for Piling Mount) Item# SM-FDB-24-Y08 SM-FDB-24-Y10 SM-FDB-24-Y12 SM-FDB-24-Y14 SM-FDB-24-S08 SM-FDB-24-S10 SM-FDB-24-S12 SM-FDB-24-S14 X X X X-I-Beam (for Flat Mount)-X X X X Track Length 8’ 10’ 12’ 14’ 8’ 10’ 12’ 14’
Y-Beam (for Piling Mount) Item# SM-FDB-18-Y08 SM-FDB-18-Y10 SM-FDB-18-Y12 SM-FDB-18-Y14 SM-FDB-18-S08 SM-FDB-18-S10 SM-FDB-18-S12 SM-FDB-18-S14 X X X X-I-Beam (for Flat Mount)-X X X X Track Length 8’ 10’ 12’ 14’ 8’ 10’ 12’ 14’
Mooring Products Mooring Products
www.DockBuilders.com 36 37
Please see our website for the optional RacheTite Line Tensioner
800.677.4710

TideSlide Mooring Products

provide safe and secure tieup and free vertical movement of your boat. TideSlides are constructed of Type 316 stainless steel and ultra high molecular weight polyethylene, a combination that will stand up to the harshest conditions.

TideSlide products are compact and mount totally out of the way. TideSlide’s unique patented design allows the unit to “ride” waves, wakes, and tides and still provide rotational movement of the mooring block. Any boat, yacht, or ship will benefit from the reduced mooring stresses that are realized from utilizing TideSlide mooring products.

TideSlides eliminate the slack line necessary in conventional tie-up, removing the guesswork on how long lines need to be for any given tide. Simply pull up to the dock and tie-up with nice, snug lines. Without slack in the lines, excess energy is not generated with your boat springing against the lines. TideSlide’s vertical movement absorbs the built up energy and allows your boat to be safely and securely held while winds, waves, and the tide do their thing.

Mooring Whips are an economical and safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides, and wakes.

Mooring Whips are made of high quality solid fiberglass poles, aluminum-magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation. Mooring Whips and Premium Mooring Whips are sold in pairs. Whips can be easily removed for storage.

Features Include:

• 2 Corrosion Protected Marine-Grade Aluminum Bases

• 2 Solid Fiberglass Whips With Roller Tips

• 2 Cleats for Whip Line Adjustment

• All Necessary Hardware & Lines

• Complete Installation Instructions

Note: Always carefully follow the manufacturer’s installation and instructions for use. Not recommended for use during extreme weather events.

• Easy In & Out Line Handling, Convenient Built-In Line Hook • Built-to-Last with High-Strength Polymers & 316 Stainless Steel • Sizes for any Boat, Yacht, or Floating Structure!

Deluxe, Standard Duty Mooring Whips are equipped with fixed angle bases and are designed for ski boats, runabouts, center consoles, and bass boats.

Premium, Heavy Duty Mooring Whips are equipped with unique rocker arm bases that return the whip poles to the vertical position when not in use. These are ideal for sailboats and larger, heavier, or high profile boats.

*Weight is more important than Length

*Weight is more important than Length

MW-1400 MW-1600 MW-1800 Item# 8’ 12’ 14’ 16’ Whip Length MW-080 MW-120 MW-140 MW-160 Item#
Up to 20,000lbs* 20,000 - 36,000lbs* 36,000 - 48,000lbs* Boat Weight Up to 2,500lbs* 2,500 - 5,000lbs* 5,000 - 10,000lbs* 10,000 - 20,000lbs* Boat Weight .813” .813” .813” .813” Whip Diameter Up to 20’* 18’-23’* 24’-28’* 29’-33’* Boat Length 14’ 16’ 18’ Whip Length 1” 1” 1” Whip Diameter Up to 33’* 34’-46’* 47’-56’* Boat Length
Tide Slide Length 4’ 5’ 6’ 7’ 8’ 9’ 10’ 11’ 12’ TS-TS-048 TS-TS-060 TS-TS-072 TS-TS-084 TS-TS-096 TS-TS-108 TS-TS-120 TS-TS-132 TS-TS-144 Item# TS-ES-048 TS-ES-060 TS-ES-072 TS-ES-084 TS-ES-096 TS-ES-108 TS-ES-120 TS-ES-132 TS-ES-144 Item# TS-YS-048 TS-YS-060 TS-YS-072 TS-YS-084 TS-YS-096 TS-YS-108 TS-YS-120 TS-YS-132 TS-YS-144 Item# TS-MS-048 TS-MS-060 TS-MS-072 TS-MS-084 TS-MS-096 TS-MS-108 TS-MS-120 TS-MS-132 TS-MS-144 Item# TS-HY-048 TS-HY-060 TS-HY-072 TS-HY-084 TS-HY-096 TS-HY-108 TS-HY-120 TS-HY-132 TS-HY-144 Item# TS-SY-048 TS-SY-060 TS-SY-072 TS-SY-084 TS-SY-096 TS-SY-108 TS-SY-120 TS-SY-132 TS-SY-144 Item# TS-MY-048 TS-MY-060 TS-MY-072 TS-MY-084 TS-MY-096 TS-MY-108 TS-MY-120 TS-MY-132 TS-MY-144 Item# TS-CS-048 TS-CS-060 TS-CS-072 TS-CS-084 TS-CS-096 TS-CS-108 TS-CS-120 TS-CS-132 TS-CS-144 Item#
Base)
Deluxe (Standard Duty w/ Fixed Base) Premium (Heavy Duty w/ Rocker
TS Series (1”) up to 30’ up to 12,000lbs CS Series (3”) up to 500,000lbs SY Series (2¼”) up to 187,000lbs HY Series (2”) up to 125,000lbs MS Series (1¾”) up to 65’ up to 65,000lbs YS Series (1½”) up to 50’ up to 50,000lbs ES Series (1¼”) up to 38’ up to 20,000lbs MY Series (2½”) up to 250,000lbs Features Include: • Super
Maintenance
Strength & Low Profile • Completely Self-Adjusting •
Free • Secure & Tight Tie-Up
Solid Stainless Steel Shafts Mooring Products Mooring
800.677.4710 www.DockBuilders.com 38 39
Products

Mooring Products

Mooring Buoys (Sur-Moor)

The sole purpose of the mooring buoy is to support the mooring chain. The two preferred designs for mooring buoys are a traditional buoy with hardware or a buoy with a tube through the center. Both offer reliable flotation and will last for several seasons, depending upon the salinity of the water. Freshwater applications will extend the useful life of any mooring system. A permanent mooring system, when properly designed, should securely position a boat so that it can be left unattended, with little attention, for long periods of time. Each system usually consists of a mooring buoy (to float the chain), a mooring anchor, and a length of chain that runs between the anchor and the mooring buoy. Also, the proper ground tackle includes correct-sized galvanized shackles and swivels. Always keep in mind that the mooring system is only as reliable as the current conditions of the environment. All Taylor Made Sur-Moor™ Buoys are built to withstand the constant abuse of most mooring environments.

Straight Aluminum Cleats

“S” Style Aluminum Cleats

Cleats

Galvanized Steel Cleats

Our cast aluminum, straight dock cleats offer a traditional look that will add a touch of class to your dock. The corrosion-resistant aluminum composition will allow them to last for years, even in harsh marine environments. They can be mounted horizontally or vertically and feature recessed hex bolt holes for easy mounting using ½” hex bolts.

Our “S” cleats are fabricated from aluminum for corrosion resistance. This cleat is “S” shaped which makes it easier to loop the lines around the horns. The mounting holes are recessed so the bolts stay clear of attached lines.

Mooring Snubbers

Made from super elastic isoprene natural rubber, the selflocking internal system design eliminates chaffing. These LineSaver Mooring Snubbers help prevent mooring line breakage along with compensating for sudden jolts and excess stretching of lines beyond parting strength. The LineSaver also provides maximum protection against the stress caused by wind, waves, and wakes.

• No Tools Needed to Install

• Locks Lines Safely and Securely

• 3 Sizes to Match Line Diameter

Our durable, cast iron cleats will last for years. They are hot-dipped galvanized (HDG) to protect from the elements and are cast with 2 recessed hex bolt holes for easy installation using hex bolts. Galvanized dock cleats are a very economical solution for your docking needs.

Flip-Up Aluminum Cleat Mounting Hardware (Galvanized)

Flip-up cleats are great for applications where safety on the dock may be a concern. They remain folded down into a low-profile base when not in use and can simply be flipped up for easy use. They are fabricated from aluminum for corrosion resistance. The mounting holes on these cleats are recessed so that the bolts stay clear of the attached lines.

“S” Style Aluminum White

HDG cleats*.

Our powder coated white “S” cleats are fabricated from aluminum for corrosion resistance. This cleat is “S” shaped which makes it easier to loop the lines around the horns. The mounting holes are recessed so the bolts stay clear of attached lines.

Mounting Hardware (Stainless Steel)

Cleat-10A-S-W

Cleat-12A-S-W

Cleat-15A-S-W

Cleat-18A-S-W

(White)

Cleats

Cleat-08A-F2 Item# Cleat-10A-S Cleat-12A-S Cleat-15A-S Cleat-18A-S Item# Cleat-08G Cleat-10G Cleat-12G Cleat-14G Item# Cleat-08A Cleat-10A Cleat-12A Cleat-14A Item# 8” Straight Cleat 10” Straight Cleat 12” Straight Cleat 14” Straight Cleat Description 10” S-Cleat 12” S-Cleat 15” S-Cleat 18” S-Cleat Description 8” Straight Cleat 10” Straight Cleat 12” Straight Cleat 14” Straight Cleat Description 8” Flip-Up Cleat Description ½” ½” ½” ½” Bolt Size ½” ½” ½” ¾” Bolt Size 5/16 ” 3/8 ” 3/8 ” 1/2 ” Bolt Size 3/8 ” Bolt Size Description Item# TB-3804SS TB-3805SS W-38SSF W-38SS HN-38SS HN-38SSL TB-1204SS LB-1204SS W-12SS HN-12SS HN-12SSL 3/8 ” x 4” Hex Bolt (full thread) 3/8 ” x 5” Hex Bolt (full thread) 3/8 ” x 11/2 ” Fender Washer 3/8 ” Flat Washer 3/8 ” Hex Nut 3/8 ” Nylon Hex Lock Nut 1/2 ” x 4” Hex Bolt (full thread) 1/2 ” x 4” Lag Bolt 1/2 ” Flat Washer 1/2 ” Hex Nut 1/2 ” Nylon Hex Lock Nut Cleat angles bolt to the outside joist offering greater strength than simply bolting through deck boards. For 8” - 12”
MS-TMP-308 MS-TMP-309 Item # Fits Line Size 3/8 ” Fits Line Size 5/8 ” Fits Line Size 3/4” Desc.
MS-TMP-307
Item# Description CleatAngle TB-38045 W-38GF HN-38 Angle Mounting Bracket 3/8 ” x 41/2 ” Hex Bolt (full thread) 3/8 ” x 11/2 ” Fender Washer 3/8 ” Hex Nut * 5/16” Hardware needed for 8” Cleats 2” 2” 2½” 2½” 3” Tube Diameter MB-T3C12 MB-T3C15 MB-T3C18 MB-T3C24 MB-T3C30 Item# 12” 15” 18” 24” 30” Buoy Diameter 30 60 100 240 460 Buoyancy (lbs) MB-T12 MB-T15 MB-T18 MB-T24 Item# MB-SBT3C18 Item# Sur-Moor T3C Mooring Buoy Tube through the center. Hardware not included. Sur-Moor Shackle Buoy Hardware included. Sur-Moor Traditional Buoy Hardware included. T3C Buoy Traditional Shackle
WARNING: The sole purpose of the mooring buoy is to support the mooring chain. The boat should be tied to the anchor chain, never tied to the buoy or hardware.
Item# 10” S-Cleat
12” S-Cleat
15” S-Cleat
18” S-Cleat
Description ½” ½” ½” ¾” Bolt Size
(White)
(White)
(White)
800.677.4710 www.DockBuilders.com 40 41

Lighthouse Hatteras Light

Configuration

Standard Features: Available Options:

• Photocell Controlled LED Light with Amber Lens for Bug Reduction

• White Heavy Resin Housing with a Two-Part Polyurethane Coating for a UV Resistant, Long Lasting Finish

• Digital Electronic Metering (One or Two Element Meter Available)

• Single or Dual Phone, Cable, or Internet Connections

• Single or Dual ¾” (or ½”) Water Bibb with Stainless Steel Handles

• Clear or Blue Color Lens

• GFCI Breakers for Twist Lock Receptacles

• Also Available as a Light Fixture, see page 47

Configuration

20 Amp 125v GFI Duplex Receptacle

20 Amp 2-Pole Hard-Wired Breaker (Extra Breaker)

30 Amp 125v Marine Twist Lock Receptacle

50 Amp 125/250v Marine Twist Lock Receptacle

Single Phase ¼” Copper Bus Bar

Introduced in 1993 and with thousands in service, this popular unit offers a low-profile alternative to the Lighthouse for smaller boat applications. The attractive Hatteras Light will welcome your guests in style. They’re great not only for marinas, but also for your dock, deck and RV. Configuration

Water Bibb

Standard Features:

• Designed to Mount on a Dock Box or Piling

• Photocell Controlled LED Light with Amber Lens for Bug Reduction

• White Heavy Resin Housing with a Two-Part Polyurethane Coating for a UV Resistant, Long Lasting Finish

Available Options:

• Electronic Metering (One or Two Element Meters Available)

• 304L Stainless Steel Stand

• Single or Dual Phone, Cable, or Internet Connections

• GFCI Breakers for Twist Lock Receptacles

• Clear or Blue Color Lens

* 20 Amp GFI receptacles are not to be used for shore power.

20 Amp 125v GFI Duplex Receptacle

20 Amp 2-Pole Hard-Wired Breaker (Extra Breaker)

30 Amp 125v Marine Twist Lock Receptacle

50 Amp 125/250v Marine Twist Lock Receptacle

Single Phase Copper Bus Bar

Water Bibb ¾” (Not available on this model)

One of our most popular and powerful units, the Lighthouse pedestal has a wide range of features. This stylish power pedestal is recognized throughout the marine industry for its practicality and exceptional durability. Engineered to withstand the most severe weather conditions, lighthouse power pedestals can be found in marinas worldwide.

Standard Features:

• Photocell Controlled LED Light with Amber Lens for Bug Reduction

• Lockable Weatherproof Doors which Protect Breakers & Receptacles while in use (A Requirement of N.F.P.A. 303 & NEC Art. 555)

• Bus Bar Rating

• Hose & Cable Brackets

• White Heavy Resin Housing with a Two-Part Polyurethane Coating for a UV Resistant, Long

Lasting Finish & Hingeless Base Providing Easy Access for Both Installation & Maintenance

• Backlit Faceplate for Easy Receptacle Plug-In at Night

• Stainless Steel Door Hinge on Receptacle Main Doors

20 Amp 125v GFI Duplex Receptacle

20 Amp 2-Pole Hard-Wired Breaker (Extra Breaker)

30 Amp 125v Marine Twist Lock Receptacle

50 Amp 125/250v Marine Twist Lock Receptacle

Single Phase 3/8 ” Copper Bus Bar

Water Bibb 3/4” with ¼ Turn Ball-Valves

Available Options:

• Digital Electronic Metering (One, Two or Three Element Meters Available)

• 100A 120/240V Pin & Sleeve (Single Phase)

• 100A 120/208V Pin & Sleeve (3 Phase)

• Built-In Meter Socket

• Wireless Remote Metering for Electric & Water

• Transient Voltage Surge Suppressor (TVSS) to Protect from Voltage Surges, Spikes or Lightning on the AC Power Line

• Single or Dual Phone, Cable, or Internet Connections

• Clear or Blue Color Lens

• GFCI Breakers for Twist Lock Receptacles

• Base Extension

Optional Stand Upgrade*

- Stainless Steel Type 304

- Powder Coated White - Water Connection ¾” (x2) - 42.2”H x 9.88”W x 7”D

Standard Features:

• Heavy 316L Stainless Steel Housing that is Powder Coated with a Polyester Resin

• Photocell Controlled LED Light with Amber Lens for Bug Reduction

• Lockable Weatherproof Doors which Protect Breakers & Receptacles while in use (A Requirement of N.F.P.A. 303 & NEC Art. 555)

*Stand upgrade must be ordered with Newport Harbor Mate. Contact us for details.

44”

• Aluminum Hose & Cable Brackets

• Backlit Faceplate for Easy Receptacle Plug-In at Night

* 20 Amp GFI receptacles are not to be used for shore power.

Configuration

Available Options:

• Digital Electronic Metering (One, Two, or Three Element Meters Available)

• 100A 120/240V Pin & Sleeve (Single Phase)

• 100A 120/208V Pin & Sleeve (3 Phase)

• Wireless Remote Metering for Electric & Water

• Transient Voltage Surge Suppressor (TVSS) to Protect from Voltage Surges, Spikes or Lightning on the AC Power Line

• Single or Dual Phone, Cable, or Internet Connections

• Stainless Steel Door Hinge on Receptacle Main Doors

• GFCI Breakers for Twist Lock Receptacles

• Clear or Blue Color Lens

20 Amp 125v GFI Duplex Receptacle

20 Amp 2-Pole Hard-Wired Breaker (Extra Breaker)

30 Amp 125v Marine Twist Lock Receptacle

50 Amp 125/250v Marine Twist Lock Receptacle

Single Phase 3/8 ” Copper Bus Bar

Water Bibb 3/4” with ¼ Turn Ball-Valves

Power Pedestals
The Lighthouse SS (Stainless Steel) offers the same standard features and available options as the standard Lighthouse, except for the upgraded housing which is made with high quality 316L stainless steel for superior quality and performance.
PP-E-L2-SS x1x1 x1 X x2 PP-E-L3-SS x1x2 x2 X x2
PP-E-N1 x1x1XPP-E-N2 x1x2XPP-E-N3 x1x1 x1 XPP-E-N4 x1x2 X -
The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment. The most innovative minipower center available, the Newport Harbor Mate hosts a variety of electrical services contained in a compact yet strong housing.
14.5”
x1x2X x2
PP-E-L1-SS
42.2”
10.5” 13.75” 9.875” 7.5”
¾” PP-E-H0 x1x1X x1 PP-E-H1 x1 x1 x1X x1 PP-E-H2 x1x2X x1 PP-E-H3x1 x1 X x1 PP-E-H4 x1 x1x1 X x1 PP-E-H5 x2-X x1
PP-E-L2 x1x1 x1 X x2 PP-E-L3 x1x2 x2 X x2
* 20 Amp GFI receptacles are not to be used for shore power. * 20 Amp GFI receptacles are not to be used for shore power. PP-E-L1 x1x2X x2 LED Lighting LED Lighting LED Lighting LED Lighting
LightHouse SS (Stainless Steel) Newport Harbor Mate 31” 44” Power Pedestals Power Pedestals 800.677.4710 www.DockBuilders.com 42 43

Admiral SS (Stainless Steel)

The flagship of Eaton Marina Power’s pedestal line, the Admiral-SS provides amperage capabilities up to 500 Amps and voltages of 480/277 three-phase, 208/120 three-phase, 120/240 single-phase, and combinations of these receptacles in one unit to serve nearly any size vessel.

Standard Features:

• Heavy 316L Stainless Steel Housing that is Powder Coated with a Polyester Resin

• Photocell Controlled LED Light with Amber Lens that Provides 360 Degrees of Lighting

Eaton Replacement Receptacles Eaton Replacement Breakers

Available Options:

• Four 100A Receptacles of Any Two Voltage Combinations; such as 277/480 Three-Phase, 120/208 Three-Phase, or 120/240 Single-Phase

• 200A/480V Receptacles

• When the 100A 120/240V Receptacles are used, Two 50 Amp 120/240V Receptacles can also be Provided for a Total of 500 Amps

• 20A/125V GFI Receptacle

• Single or Dual High-Speed Internet Connections

• Single or Dual Water ¼Turn Ball Valves with ¾” Hose Bibbs & Stainless Steel Handles

• Digital Metering Available

• Phone Hookups

• Wireless Remote Metering Available for Water & Electricity

• 30A & 50A Twist-locks Available

• Clear or Blue Color Lens

Eaton Miscellaneous Replacement Parts

Item# PP-E-F1-SS (10lb Fire Ext.)

Item# PP-E-F2-SS (20lb Fire Ext.)

51”
9.875” 14”
Item# PP-E-Admiral-Series
20A GFCI Duplex Receptacle 30A Twistlock Receptacle 50A 125/250V Twistlock Receptacle Desc. PP-E-MPL3038 PP-E-MPL3039 PP-E-MPL3045 Item# 20A 125V 1-Pole Breaker 30A 125V 1-Pole Breaker 20A 125/250V 2-Pole Breaker 30A 125/250V 2-Pole Breaker 50A 125/250V 2-Pole Breaker 20A 125V 1-Pole GFCI Breaker 30A 125V 1-Pole GFCI Breaker 20A 125/250V 2-Pole GFCI Breaker 30A 125/250V 2-Pole GFCI Breaker 50A 125/250V 2-Pole GFCI Breaker Desc. PP-E-MPL1020 PP-E-MPL1030 PP-E-MPL2020 PP-E-MPL2030 PP-E-MPL2050 PP-E-MPLGF1020 PP-E-MPLGF1030 PP-E-MPLGF2020 PP-E-MPLGF2030 PP-E-MPLGF2050 Item#
Eaton LED Replacement Bulb Eaton 20A GFCI External Duplex Receptacle Eaton Lighthouse/Powerhouse Main Door Eaton Replacement Photocell Hatteras - 3/4” S.S. Ball Valve (Hose Bib) w/o Mounting Plate Amber Color Replacement Lens for Hatteras/Lighthouse Desc. PP-E-MPLLEDB PP-E-MPL1101 PP-E-MPL6007 PP-E-MPL3044 PP-E-MPL5271 PP-E-MPL6005 Item# LED Lighting LED Lighting
Complete solution for fire and emergency needs, this pedestal features fire extinguisher storage, an alarm strobe light and an optional life ring. • LED Light with Red Lens • White 316L Stainless Steel Powder Coated Housing with Polycarbonate Top Assembly • Alarm Strobe Light & Siren: Automatically Activated when door is open or life ring is removed. • 24” Life Ring • Choose either a 10 lb. or 20 lb. ABC Type Fire Extinguisher • 30” Life Ring Standard Features: Available Options: 44” Power Pedestals Power Pedestals 800.677.4710 www.DockBuilders.com 44 45
Firehouse

S.

Slimline 6” Dockside Pedestals

Standard Features:

• Casing: Maximum 4 Receptacles (6 Poles)

• Extruded, Seamless, Marine-Grade Aluminum 6063 with 1/8 ” Wall Thickness

• Welded Base for Extra Strength

• All Stainless Steel Fasteners with Nylon Washers

• Isolation Plate to Separate Water, Telephone, and TV from Electrical

• Each Receptacle Protected by a Thermal Magnetic Circuit Breaker

• Marine-Grade Electrical Receptacles are Available in 20 Amp Duplex GFI & 20, 30 & 50 Amp Twist-Lock

• Electrical Distribution Block - Direct Feed

• Lexan Lenses for the LED Lights are on Three Sides

• Cone Top

• Powder Coated White Inside & Outside

36”

• Listed by Qualified Testing Agency

• Water Bibb ¾”

* 20 Amp GFI receptacles are not to be used for shore power.

20 Amp 110v GFI Duplex Receptacle (w/Alum. Covers)

20 Amp 2-Pole Hard-Wired Breaker (No Receptacle)

30 Amp 125v Marine Twist Lock Receptacle (w/Alum. Covers)

50 Amp 125/250v Marine Twist Lock Recept. (w/Alum. Covers)

Bibb

Cast Aluminum Hose Holder

Standard Features:

• Casing: Maximum 6 Receptacles (9 Poles)

• Extruded, Seamless, Marine-Grade Aluminum 6063 with 1/8 ” Wall Thickness

• Welded Base for Extra Strength

• All Stainless Steel Fasteners with Nylon Washers

• Isolation Plate to Separate Water, Telephone, and TV from Electrical

• Each Receptacle Protected by a Thermal Magnetic Circuit Breaker

• Marine-Grade Electrical Receptacles with Aluminum Covers Available in:

• 20 Amp Duplex GFI

• 20 Amp Twist-Lock

• 30 Amp Twist-Lock

• 50 Amp Twist-Lock

• 100 Amp Single & Three Phase - Pin & Sleeve

• Electrical Distribution Block - Direct Feed

• Lexan Lenses for the LED Lights are on Three Sides

• Cone Top

• Powder Coated White Inside & Outside

• Listed by Qualified Testing Agency

• Water Bibb ¾”

• Height 41”-45”

• Distributes Light Through Lexan Windows (360° Light)

• Extruded Marine-Grade Aluminum 6063

• Powder Coated White Inside & Outside

• Designed & Built for use in a Corrosive Salt Water Environment

• Listed by Qualified Testing Agency

• 6” x 6” x 36”

• LED Lighting

• Amber Colored Sleeve for Light Assembly

• Distributes Light Through Lexan Windows (360° Light)

• Extruded Marine-Grade Aluminum 6063

• Powder Coated White Inside & Outside

• Designed & Built for use in a Corrosive Salt Water Environment

• Listed by Qualified Testing Agency

• 8” x 8” x 41”

• LED Lighting

• Amber Colored Sleeve for Light Assembly

• Distributes Light Through Lexan Windows (360° Light)

• Extruded Marine-Grade Aluminum 6063

• Powder Coated White Inside & Outside

• Designed & Built for use in a Corrosive Salt Water Environment

Item# DL-LBB-36

Item# DL-LBB-41

• Listed by Qualified Testing Agency

• 6” x 6” x 12”

• LED Lighting

• Amber Colored Sleeve for Light Assembly

Item# DL-LBC-BELL

The attractive Hatteras Light will welcome your guests in style. They’re great not only for commercial marinas, but also for residential docks and decks.

Standard Features:

• Photocell Controlled LED Light with Amber Lens for Bug Reduction

• White Heavy Resin Housing with a Two-Part Polyurethane Coating for a UV Resistant, Long Lasting Finish

Available Options:

• Clear or Blue Lens

• Water Connection

The lightweight Mariner Bollard Light is available in 18”, 24”, and 36” tall configurations and may be used in various applications from marina docks, to landscaped areas, golf courses, and beyond. The Mariner is designed to withstand the harsh marine environments from Alaska to the tropics.

Standard Features:

• LED Lighting

• Mounting Base & Painted Pole Supplied for Desired Height

• 18”, 24” or 36” Total Height

• Amber Colored Lens

Available Options:

• Clear Lens

Item# PP-E-HL

110v Lighting

18” Tall 24” Tall 36” Tall Height PP-E-M18 PP-E-M24 PP-E-M36 Item#
LED Lighting 6½” 4”
18”-36”
41”-45” Configuration
Water
¾”
Height PP-SPC-362A-365B x1 x1 x1x1 x1 36” PP-SPC-363A-250 x1 x2x1 x1 36” PP-SPC-363A-305 x1 x1 x1 x1 x1 36” PP-SPC-362A-365A x1 x1x1 x1 36” • Power Block - Loop Feed (Stud) - Maximum Wire Size 250 MCM Cable • Electric Meters • Amber Colored Sleeve for Light Assembly • GFCI Breakers for Twist Lock Receptacles Available Options: Item# PP-I-SPB-Series • Power Block - Loop Feed (Stud) - Maximum Wire Size 250 MCM Cable • Electric Meters • Amber Colored Sleeve for Light Assembly • GFCI Breakers for Twist Lock Receptacles • Single or Dual Phone, Cable, or Internet Available Options: LED Lighting LED Lighting
S. King Fulton Standard
Dockside Pedestals Power 7½” 31” LED Lighting LED Lighting LED Lighting LED Lighting Pedestal Light 41” Pedestal Light 36” Dockside Piling Light Hatteras Light Mariner Bollard Light Power Pedestals 110v Lighting 800.677.4710 www.DockBuilders.com 46 47
King Fulton
8”

Solar Dock Dots are simply the neatest, smallest, solar lights you have ever seen! Super Bright LEDs make these brilliant little guys stand out at night. A nearly flush mount makes them virtually unnoticeable during the day and eliminates any tripping hazards. Easy to install in minutes with a quick 13/8 ” drill bit or hole saw. A super bright LED and powerful solar panel provide night illumination. Impress all the neighbors with these simple to install super nifty units! Six color options to choose from: White, Blue, Green, Red, Amber, Ice Blue. Great for docks, pilings, decks, walkways, patios, stairs, railings, or landscaping. Replaceable batteries.

Item#

Solar-LL-DOT-Amber

Solar-LL-DOT-Blue

Solar-LL-DOT-Green

Solar-LL-DOT-Red

Solar-LL-DOT-White

Solar-LL-DOT-Ice

Description

Solar Dock Dots 4-Pack Amber Light

Solar Dock Dots 4-Pack Blue Light

Solar Dock Dots 4-Pack Green Light

Solar Dock Dots 4-Pack Red Light

Solar Dock Dots 4-Pack White Light

Solar Dock Dots 4-Pack Ice Blue Light

This is the latest in Solar Dock Light technology from Lake Lite Inc. Indirect downward lighting provides a unique and outstanding look for your dock. The unit provides a seamless look for your 3½” OD dock post covers or post. Six amazingly bright LEDs placed around the unit shine light downward and outward all around the post creating an amazing look at night. The LEDs illuminate the dock post as well as the dock surface providing indirect lighting that will be sure to astonish! The larger top allows much more power from the solar panel to ensure full charging even on cloudy days!

During the day the solar panel collects the sun’s energy and charges the batteries. At nightfall, Solar Dock Light’s sensor automatically turns on the super bright LED With multiple units, your dock will provide an elegantly lit pathway for all to walk on. This unit is hands free and energy efficient. Lasts 12+ hours on a full charge and is brighter than conventional solar garden lights! Yes it lasts all night! Just place it on your dock post and you are ready to go!

Item#

Solar-LL-SDL-UG-W-W

Solar-LL-SDL-UG-W-A

Solar-LL-SDL-UG-W-B

Desc.

Solar Underglow (White LED)

Solar Underglow (Amber LED)

Solar Underglow (Blue LED)

The Marine-Grade Solar Deck Light is an industrial strength solar powered dock light made from anodized aluminum for superior protection in harsh marine environments. Will not rot from harsh sun exposure! IP 68 Waterproof design.

Super bright LEDs and powerful solar panel provide safe night illumination. Low profile design makes it perfect for docks and marina applications needing to provide ambient pathway & dock lighting. Added built in reflector provides extra safety for passing boaters as well makes them ideal for marking swim rafts. Easy hassle-free mounting, no wires, no mess, no electrical cost!

* Durable Marine-Grade Aluminum Housing *

The Solar Sky Light with IR sensor is an intelligent outdoor lighting system that provides powerful lighting into an all-in-one compact, easy to install package. During the day, the highly efficient solar panel collects energy from the sun and stores power in the advance lithium battery. At night, the powerful LEDs automatically turn on providing ambient light for all to enjoy.

When motion is detected, the super bright LEDs double in brightness to provide an abundance of extra lighting for anyone in the area. After 5 minutes or when motion is no longer detected, the light drops down in brightness to conserve power. This intelligent feature allows the Solar Sky Light to save power when no one is in range or utilizing the light, meaning much longer run times than you would expect from similar size solar lighting. The IR sensor is the practical way to enjoy brighter than normal light when needed (when someone is near)!

Item#

Desc Solar-LL-Deck-White

Solar Deck/Dock Light White LEDs

Solar-LL-Deck-Blue

Solar Deck/Dock Light Blue LEDs

Lighting - Solar
2 Lumens 8+ Hour Run Time Changeable Battery 5 Lumens 8+ Hour Run Time Changeable Battery 20 Lumens 12+ Hour Run Time Changeable Battery Low Profile Designed for 3½” OD post
• Self Sufficient • No Electrical Cost • Easy to Install • No Wires or Cables Needed • Long Lasting Lithium Battery
Integrated IR sensor
Compact Design
Cost Savings Features: Solar Sky Light with IR Sensor Desc. Solar-LL-SKL-IR Item# Dimensions: 23½”L x 16½”W x 2-4”H Pole not included LED Lighting
Dimensions: 5”D x 4”H Dimensions: 4¼”L x 4¼”W x 1”H Dimensions: 1.68”D x 1.4”H LED Lighting LED Lighting LED Lighting
Solar Underglow Lighting - Solar Lighting - Solar 800.677.4710 www.DockBuilders.com 48 49
Solar Sky Light
Solar Dock Dots Solar Deck Lights

Solar Piling Light

The 8” Solar Piling Light is one of the most advanced, robust, and well-designed solar piling lights to hit the market. Eight super-bright LEDs are positioned facing downward to eliminate blinding eye glare and provide more ambient light. Patented technology allows you to easily change the color and brightness settings using only a magnet. The LEDs have three color settings (white, amber, or blue) and five brightness settings. The composite fixture is available in a white or black finish to suit your aesthetic requirements.

Solar Pagoda Piling Light

The Solar Pagoda Piling Light provides a clean, classic look. The louvered aluminum fixture comes in an attractive white powder-coated finish. A super bright LED illuminates the fixture, providing a soft, ambient glow that is not blinding at eye level. The patented magnet technology allows a quick change of LED intensity for adjustment to the five brightness settings. Optional amber LED is available for turtleconscious lighting requirements.

The Solar Piling Light has an advanced microprocessor control circuit which monitors every aspect of the light and has protective features to prevent overcharging, over discharging, output control, and constant brightness technology. Equipped with the industries latest LiFePo4 battery technology, the Solar Piling Light will run for years on the same battery.

4 x 4 Square Post Cap Lights

5½ x 5½ Square Post Cap Lights

The Solar Pagoda Piling Light has an advanced microprocessor control circuit monitoring every aspect of the light with protective features to prevent overcharging, over discharging, output control, and consistent brightness. Equipped with the industries latest LiFePo4 battery.

Each of the 4 sides of this light has white ultra-high intensity downward shining LEDs that automatically come on at dusk and turn off at dawn. Swipe the magnet quickly over the solar panel to adjust between 7-brightness levels or “OFF”. Use with 3½” x 3½” wood posts or remove the adapter to use with 4” x 4” vinyl posts.

Each of the 4 sides of this light has white, amber and blue ultrahigh intensity downward shining LEDs that automatically come on at dusk and turn off at dawn. Hold a magnet for 5 seconds over the solar panel and the solar post cap light will switch between the different colors. Swipe the magnet quickly over the solar panel to adjust between 7-brightness levels or “OFF” on any of the colors. Use with 5½” x 5½” Aztek, Trex, vinyl, or wood posts.

Dims: 8¼”L

The Solar Marine Light is an industrial strength, solar powered light designed for the harshest environments. This model is available in several colors for dock lighting and safety applications. A switch on the bottom allows you to choose between constant or flashing light. Great for dock lighting, marinas, boat houses, safety lighting, channel markers, buoys, obstruction lighting, mooring lights, and just about anywhere you may need a light!

Super bright LEDs and powerful solar panel provide all night illumination. Mounts virtually anywhere in minutes providing a fast and cost effective lighting solution. Easy hassle-free mounting, no wires, no mess, and no electrical cost!

Solar-LL-SML-Amber

Solar-LL-SML-Blue

Solar-LL-SPC-03.5-B-W

Solar-LL-SPC-03.5-W-W

Solar-LL-SPC-03.5-BR-W

Solar-LL-SPC-05.5-B-WAB

Solar-LL-SPC-05.5-W-WAB Item#

Black Finish with Multicolor LEDs White Finish with Multicolor LEDs Desc.

Solar-LL-SML-Green

Solar-LL-SML-Red

Solar-LL-SML-White

Description

Amber LED (Constant or Flash 1 sec.)

Blue LED (Constant or Flash 1 sec.)

Green LED (Constant or Flash 1 sec.)

Red LED (Constant or Flash 1 sec.)

White LED (Constant or Flash 1 sec.)

Item# 10/20 Lumens 24-36 Hr. Run Time Changeable Battery
Description
Item# 5-25 Lumens 6-26 Hour Run Time Changeable Battery LED Lighting
White Pagoda Light (White, Blue, or Amber LED)
Solar-LL-PAG-W-WBA
Black Solar Piling Light (White, Blue, or Amber LED) White Solar Piling Light (White, Blue, or Amber LED) Description Solar-LL-SPL-8-B-WBA Solar-LL-SPL-8-W-WBA Item# 35-120 Lumens 6-18 Hour Run Time Changeable Battery LED Lighting
Dimensions: 8”D x 4”H Dimensions: 4¼”D x 4”H Dimensions: 10”D x 9½”H 5-35 Lumens 10-40 Hr. Run Time Changeable Battery LED Lighting
5½”L 5½”W x 2½”H 4x4 Black Finish with White LEDs 4x4 White Finish with White LEDs 4x4 Brown Finish with White LEDs Desc.
Dims:
Item#
10-100 Lumens 10-100 Hr. Run Time Changeable Battery LED Lighting
8¼”W
x 2¾”H
LED Lighting
Lighting - Solar Lighting - Solar 800.677.4710 www.DockBuilders.com 50 51
Solar Marine / Channel Marker Lights (1-Nautical Mile)

Sur-Mark™ Marker Buoys

Sur-Mark™ and Sur-Mark™ II regulatory buoys are molded from tough, UV protected polyethylene. These buoys feature one-piece seamless construction, internal concrete ballast, recessed galvanized eye, and flat bottom for upright storage. Color labels (sold separately, see below) fit both styles. Sur-Mark I and II buoys include orange marking tape. Chain and hardware not included. For solar warning / channel marker lights, see page 55.

No-Wake Marker Buoy

DockBuilders’ No Wake, Idle Speed marker buoy is a step above the rest. Our marker buoy is constructed using tough, UV protected, white polyethylene and is foam filled for positive buoyancy. Unlike other buoys on the market, ours comes complete with the No Wake, Idle Speed labels pre-installed on both sides and highly visibility reflective tape. It also features a concrete internal ballast, which keeps the buoy upright. A hot dipped galvanized eye bolt is included for easy attachment at the bottom. Measures 70” high with a column diameter of 8½”. Large round ring measures 16”. For solar warning / channel marker lights, see page 55.

The World’s First Solar Powered Silhouette

Illuminating Buoys are the safest available. Not only can you see the buoy at night, you can actually read the message! This unit is equipped with new, patent pending magnet technology. Swipe the magnet over the solar panel at night to change between 7 brightness levels for user adjustable brightness and run times. Hold the magnet for 5 seconds, and you can change between white, blue, or amber illuminating LEDs! That’s right, a simple swipe and you can adjust the brightness, run time, and LED color!

The powerful solar panel collects the sun’s energy during the day. At night the integrated circuit automatically turns on the super bright LED which illuminates the entire body of the buoy. The labels create shadows of the message, logos, and bands, that allow boaters to visibly read the buoy’s message at night.

Marker Buoys

Choose from the many label options listed above.

Manufactured from rotationally molded polyethylene for uniform thickness makes this buoy virtually indestructible! Resistant to damage from most collisions or harsh environmental forces.

Highly visible reflective labels, bands, and symbols increase day and night visibility. Powerful 4 watt solar panel ensures all night run-times even on cloudy days.

Solar Powered Illuminating Buoys are a safer alternative to unlit traditional Buoys.

Illuminated

Item# Label

Solar-LL-Buoy-P-BR

Solar-LL-Buoy-P-BS

Solar-LL-Buoy-P-CC

Solar-LL-Buoy-P-D

Solar-LL-Buoy-P-DA

Solar-LL-Buoy-P-DKO

Solar-LL-Buoy-P-DR

Solar-LL-Buoy-P-EC

Solar-LL-Buoy-P-HA

Solar-LL-Buoy-P-IS

Solar-LL-Buoy-P-ISNW

Solar-LL-Buoy-P-ISS

Solar-LL-Buoy-P-KO

Solar-LL-Buoy-P-LA

Solar-LL-Buoy-P-ME

Solar-LL-Buoy-P-NB

Solar-LL-Buoy-P-NF

Solar-LL-Buoy-P-NS

Solar-LL-Buoy-P-NW

Solar-LL-Buoy-P-PWCA

Solar-LL-Buoy-P-RC

Solar-LL-Buoy-P-S05M

Solar-LL-Buoy-P-S10M

Solar-LL-Buoy-P-SHA

Solar-LL-Buoy-P-SL

Solar-LL-Buoy-P-SNW

Solar Light Marker Buoy
49” 61” 49” 49” Height MB-SM MB-SM2 MB-SMG MB-SMR Item# Sur-Mark II Sur-Mark Sur-Mark II Green Red Description 18” na 18” 18” Large Ring 40 15 40 40 Buoyancy (lbs) Sur-Mark I Red Sur-Mark Green Sur-Mark 61” 49” 49” 49”
MB-CNA-NWIS 70” Height MB-CNANWIS Item# No Wake / Idle Speed Marker Buoy Description 16” Large Ring 40 Buoyancy (lbs) 70”
Marker Buoys 52”
Solar-LL-Buoy-P-SWA Solar-LL-Buoy-P-UC Solar-LL-Buoy-P-WC Boat Ramp Boat Smart Center Channel Danger Dive Area Danger Keep Out Danger Rocks Extreme Caution Hazard Area Idle Speed Idle Speed No Wake Idle Speed (w/ Swim Icon) Keep Out Landing Area Marina Entrance No Boats No Fishing No Swimming No Watercraft PWC Area Race Course Slow 5 MPH Slow 10 MPH Shallow Area Save Lives Slow No Wake Swim Area Use Caution Waterski Course • Fade Resistant, Self-Adhesive, Vinyl Marker Labels • Brightly Colored for High Visibility • Two Labels Required per Buoy (Sold in Pairs) • 13” Wide x 24” Long for Sur-Mark™ or Sur-Mark™II Sur-Mark™ Buoy Labels #MB-L-SNW #MB-L-S05M #MB-L-IS #MB-L-SHA #MB-L-SWA #MB-L-NS #MB-L-NB #MB-L-KO #MB-L-HA #MB-L-DR #MB-L-DKO #MB-L-D Marker Buoys Illuminated Marker Buoys 800.677.4710 www.DockBuilders.com 52 53

Solar Powered Marker Buoy

The Solar Powered Marker Buoy is the foolproof way to mark your shoreline, swim area, and other obstacles. The powerful and bright Solar Illuminating Buoy Marker will keep swimmers, docks, and obstacles, safe from boaters during the day and at night! Perfect for finding your way home at night after an evening boat ride! The fun doesn’t stop there! This solar illuminating buoy marker is equipped with Lake Lite’s new patent-pending magnet technology! Swipe the magnet over the solar panel at night to change between 7 brightness levels for user adjustable brightness and run times. Hold the magnet for 5-seconds and you can change between White, Blue, or Amber illuminating LEDs! That’s right, a simple swipe and you can adjust the brightness/run time and buoys illuminating color!

The powerful solar panel of the Solar Powered Marker Buoy collects the suns energy during the day. At night the integrated circuit automatically turns on the super bright LED which illuminates the entire body of the buoy. The Solar Powered Marker Buoy is a unique product with multiple features that will enhance the safety of any marine area.

Manufactured from rotationally molded polyethylene for uniform thickness makes this buoy virtually indestructible! Will not crack or fracture from collisions or harsh environmental forces.

Highly visible reflective band and super bright LEDs enhance night visibility. Powerful 2 watt solar panel ensures all night run times even on cloudy days.

Marker Buoy with Solar Navigation Light

The Marker Buoy with Solar Navigation Light is the perfect way to mark your shoreline, swim area, and other obstacles. The powerful and bright Marker Buoy with Solar Navigation Light will keep swimmers, docks, and obstacles, safe from boaters during the day and at night! Perfect for finding your way home at night after an evening boat ride! The powerful solar panel of the Marker Buoy with Solar Navigation Light collects the suns energy during the day. At night the integrated circuit automatically turns on the super bright LED which illuminates the entire body of the buoy.

Manufactured from rotationally molded polyethylene for uniform thickness makes this buoy virtually indestructible! Will not crack or fracture from collisions or harsh environmental forces.

Highly visible reflective band and super bright LEDs enhance night visibility. Powerful 2 watt solar panel ensures all night run times even on cloudy days. Marker Buoy with Solar Navigation Light prevents costly boatbuoy collisions and restore confidence back to nighttime boaters.

Solar-LL-Buoy-B-A

Solar-LL-Buoy-B-B

Solar-LL-Buoy-B-G

Solar-LL-Buoy-B-R

Solar-LL-Buoy-B-W

Description

Marker Buoy w/ Solar Navigation Amber LED

Marker Buoy w/ Solar Navigation Blue LED

Marker Buoy w/ Solar Navigation Green LED

Marker Buoy w/ Solar Navigation Red LED

Marker Buoy w/ Solar Navigation White LED

were designed specifically to solve the problems caused by fragile designs of the past, some of which are still being sold today. Deep Glow’s patented design utilizes a tri-level protected metal halide bulb, a waterproof, weighted, custom - injection molded polycarbonate housing, and 1/4” thick glass dome. The heat generated by the bulb helps keep the glass free of marine growth. Depending on water clarity and depth, our lights can illuminate a diameter of up to 30 feet! Deep Glow Lights are not only the toughest lights in the industry, they are brighter, easy to install, and well known for attracting fish.

Deep Glow Underwater Dock Lights

Light Sensing Timer

High Intensity Underwater Dock Light

Item# 10/20 Lumens 24-36 Hr. Run Time Changeable Battery LED Lighting
10-125 Lumens 6-46 Hr. Run Time Changeable Battery
Item# Solar-LL-Buoy-B-WAB
Fish Attraction Lights
LED Lighting
Dimensions: 9” x 7½” *Green is the best color choice for fish attraction **Clear and blue lights only show up well in clear water
Item# Timer15112
Item# Green* Light w/30’ Cord Green* Light w/40’ Cord Green* Light w/50’ Cord Green* Light w/60’ Cord Blue** Light w/30’ Cord Blue** Light w/40’ Cord Blue** Light w/50’ Cord Blue** Light w/60’ Cord Clear** Light w/30’ Cord Clear** Light w/40’ Cord Clear** Light w/50’ Cord Clear** Light w/60’ Cord Description
FL-DG-HI-G30 FL-DG-HI-G40 FL-DG-HI-G50 FL-DG-HI-G60 FL-DG-HI-B30 FL-DG-HI-B40 FL-DG-HI-B50 FL-DG-HI-B60 FL-DG-HI-C30 FL-DG-HI-C40 FL-DG-HI-C50 FL-DG-HI-C60
800.677.4710 www.DockBuilders.com 54 55
Automatically turn the underwater light on at dusk and run for a set period of time.
Illuminated Marker Buoys Fish Attraction Lights

Fish Cleaning Stations

Fish Cleaning Stations

Station is an outstanding amenity for marinas, yacht clubs, private docks, and public piers.

DockBuilders’ Deluxe Fish Cleaning

Our Deluxe fish cleaning station combines sleek, aerodynamic styling with superior strength and durability. Designed for the discerning fishing enthusiast, our table features a solid ¾” thick King Starboard cutting top. Top mounting brackets allow you to adjust the tabletop pitch, allowing water, scales, blood, and other debris to run off the back of the table into the water.

39” Fish Station with Angled Legs

• All 6061 T-6 Marine-Grade Aluminum Table

• Type 316 Stainless Steel Hardware

• ¾” Thick King Starboard Cutting Top

• Welded Construction in all Stress Areas

• Space Saving Mounting Over Edge of Dock

• Quick and Easy Installation in 15 minutes

39” Fish Station with Pedestal

DockBuilders’ Pro-Series

Fish Cleaning Station is a must for serious anglers and a perfect amenity for marinas, yacht clubs, private docks, and public piers.

Designed for the discerning fishing enthusiast, our table features a solid ½” thick King Starboard® cutting top. A perforated aluminum shelf under the table allows you to store knives and other items while cleaning your catch! The slotted table backsplash facilitates water, scales, blood, and other debris to run off the back of the table into the water.

• All 6061 T-6 Marine-Grade Aluminum Table

• Perforated Aluminum Shelf

• ½” Thick King Starboard Cutting Top

• Fully Welded Construction

• Space Saving Mounting Over Edge of Dock

• Ships Fully Assembled, Ready to Install

50” & 68” Fish Stations with 4 Legs 50” & 68” Fish Stations with 2 Legs

Top built with high quality marine grade ½” UV resistant starboard with marine grade aluminum frame and shelf. Space saving angled leg design. Top built with high quality marine grade ½” UV resistant starboard with marine grade aluminum frame and shelf. Space saving 2 leg construction. The aluminum legs are welded at a sleek 5-degree angle, which not only makes for a stylish look, but also allows the back edge of the table to hang approximately 7” beyond the edge of the dock.
Item# FCS-50-4L Item# FCS-68-2L Item# FCS-50-2L Item# FCS-68-4L Item# FCS-39-SP Item# FCS-39-4L FCS-50-2L FCS-68-2L 2-Leg Fish Cleaning Station w/ Shelf - 50”W x 23”D 38”H 2-Leg Fish Cleaning Station w/ Shelf - 68”W x 24”D 38”H Desc. Item# FCS-50-4L FCS-68-4L 4-Leg Fish Cleaning Station w/ Shelf - 50”W x 23”D 38”H 4-Leg Fish Cleaning Station w/ Shelf - 68”W x 24”D 38”H Desc. Item# FCS-39-SP Pedestal Fish Cleaning Station - 39”W x 19”D 35½”H Desc. Item# FCS-39-4L 4-Leg Fish Cleaning Station - 39”W x 19”D 35½”H Desc. Item# Fish Cleaning Recommended Fastener Kit for Wood (Not Included) Item# FCS-AK4L Item# FCS-AK2L Stainless Steel Screws x12 Wood Fasteners Included Stainless Steel Screws x6 Wood Fasteners Included ¼” x 2” SS Hex Drive Screws [x8] x8 x8 x2 ¼” x 2” SS Hex/Lag Screws [x8] ⁵⁄₁₆” x 4” SS Hex Bolts [x2] ⁵⁄₁₆” SS Hex Nuts & Washers [x2] x6 x12 Recommended Fastener Kit for Wood (Not Included)
The single aluminum pedestal is offset toward the front, which not only makes for a sleeker look, but also allows the back edge of the table to hang approximately 4” beyond the edge of the dock.
800.677.4710 www.DockBuilders.com 56 57

Dock Boxes are our specialty at Dock Builders Supply. All of our dock boxes are constructed from heavy duty white fiberglass with an average 3/16” wall thickness. The lids are constructed with a strong, sandwich-core design for unsurpassed strength. Most of our standard dock boxes come standard with lockable, stainless steel latches, secured with oversized, rustproof rivets. In addition, gas shocks are included on our LS1 model and on all numerical models ending in 426 or higher, except for the model 636. All boxes feature stainless steel piano hinges that are attached with adhesive and oversized rustproof rivets. The UV gel coated exterior provides long-lasting beauty and protection.

Triangle Box w/ Electric Inset

Seat Top 73” Dock Box

Fiberglass Dock Boxes

Triangle 54” Dock Box

Rod Holder 95”

Item# DB-9622-25 Outside Dimensions: 96”W x 22”D x 25”H Inside Dimensions: 90½” x 17”D x 22”H SS Vents & Gas Shocks
Item# DB-8527-26 Outside Dimensions: 85”W x 27”D x 26”H Inside Dimensions: 81½”W x 23”D x 25”H SS Vents & Gas Shocks Standard
Item# DB-7527-26 Outside Dimensions: 75”W x 27”D x 26”H Inside Dimensions: 71”W x 23”D x 25”H SS Vents & Gas Shocks Standard
Item# DB-7122-24 Outside Dimensions: 71”W x 22”D x 24”H Inside Dimensions: 66”W x 17”D x 22”H SS Vents & Gas Shocks Standard
Item# DB-5422-24 Outside Dimensions: 54”W x 22”D x 24”H Inside Dimensions: 47½”W x 15½”D x 23”H Gas Shocks
Item# DB-4426-27 Outside Dimensions: 44”W x 26”D x 27”H Inside Dimensions: 38½”W x 15½”D x 26”H Gas Shocks
Standard 96” Dock Box
Standard 85” Dock Box
75” Dock Box
71” Dock Box
54” Dock Box
Standard 44” Dock Box
Item# DB-5434-29-TRI Outside Dimensions: 54”W x 34”D x 29”H Inside Dimensions: 49”W x 29”D x 26”H Gas Shocks
Item# DB-TM-7328-30ST Outside Dimensions: 73”W x 28”D x 30”H Inside Dimensions: 65”W x 22”D x 25”H Gas Shocks
Dock Box Item# DB-TM-9522-24-Rod Outside Dimensions: 95”W x 22”D x 24”H Inside Dimensions: 89”W x 17”D x 20”H Gas Shocks
Item# DB-TM-TRI-02 Outside Dimensions: 51”W x 29”D x 33”H Inset Dimensions: 11”W x 5-1/4”D x 26-5/8”H Gas Shocks Electrical Inset compatible with Eaton Newport Harbor Mate (see page 42)
800.677.4710 www.DockBuilders.com 58 59
Fiberglass Dock Boxes Fiberglass Dock Boxes

WOOD Rx Ultra utilizes proprietary technology to provide sheer protection for a more natural look. WoodRx Ultra employs a superfine particle size that offers increased penetration for improved water repellency and more uniform wear. Wood Rx Ultra spreads effortlessly and evenly, resisting the lapping characteristics inherent in most transparent wood sealers. Wood RX Ultra is recommended for all climates and wood surfaces. With no toxic ingredients, and a VOC of less than 50 g/l, it is one of the most environmentally friendly products on the market. Product may be applied with a pump sprayer and cleaned up using only soap and water.

WOOD Rx Original formulation is a technologically advanced water-based finish that effectively penetrates, seals and protects exterior wood surfaces. Its 100% acrylic formulation provides superior flexibility and adhesion. It allows wood surfaces to breathe, protects against water and moisture penetration, provides maximum protection against mildew and algae growth, and contains powerful UV screeners which filter out the sun’s harmful rays. In addition, WOOD Rx is environmentally friendly which is an increasing concern in today’s marketplace. Wood RX original formulation is only recommended for tropical climates that do not experience freeze/thaw conditions.

Wood Rx Ultra

SunWalk™ 90 Series is a superior dock decking surface that incorporates industry leading 45% open surface design for better environmental performance with all the strength, safety, and durability required by your tough application needs. Looks and performs great in coastal marina and residential applications. Sunwalk™ products are designed to stay looking and performing great in the toughest of environments. Storm surge and high-water are of less concern, due to the grated design and unequaled strength which allows waves and water to flow through the surface.

Wood Sealer

Wood Rx Original

Easy Installation – Uses Half the Fasteners of Wood & Takes Half the Time

• Freshwater & Saltwater Rated

SunWalk 12” x 36” Panel

SunWalk 12” x 48” Panel

SunWalk 24” x 48” Panel

1 Gal. Natural - Ultra 2 Gal. Natural - Ultra Sprayer 5 Gal. Natural - Ultra 1 Gal. Custom Color - Ultra 5 Gal. Custom Color - Ultra Description WoodRx-U-Nat1 WoodRx-U-Nat2S WoodRx-U-Nat5 WoodRx-U-SO1 WoodRx-U-SO5 Item# Classic Natural Cedar Teak Walnut Mahogany Sienna Redwood Tawny Cypress Chestnut Note: Wood RX Colors shown are approximate and may vary. For additional custom colors, see our website. Most Popular Natural Ultra Finish Shown Natural Finish Shown Visit dockbuilders.com for application instructions, coverage information, and custom color options. 1 Gal. Natural - Original 5 Gal. Natural - Original 1 Gal. Custom Color - Orig. 5 Gal. Custom Color - Orig. 1 Gal. Clear Water Repellent 2 Gal. Clear (Pump Sprayer) 5 Gal. Clear Water Repellent Description WoodRx-O-Nat1 WoodRx-O-Nat5 WoodRx-O-SO1 WoodRx-O-SO5 WoodRx-WR-Cle1 WoodRx-WR-Cle2S WoodRx-WR-Cle5 Item#
• Maintenance Free – UV Protected
No Painting, Staining, Insects, Splinters, or Rot, Just Enjoy Your Dock • Storm Resistant – More Open Also Means Less Hydraulic Uplift From Storm Waves, Surge & High-Water • Safe – Slip-Resistant ADA Compliant Surface is Also Cooler to the Touch - Stay Barefoot & Comfy •
-
12” x 36” Panel Stone Grey 12” x 36” Panel Beige Desc. SW-90-1236S SW-90-1236O Item# 12” x 48” Panel Stone Grey 12” x 48” Panel Beige Desc. SW-90-1248S SW-90-1248O Item# 24” x 48” Panel Stone Grey 24” x 48” Panel Beige Desc. SW-90-2448S SW-90-2448O Item# SunWalk 12” x 60” Panel 12” x 60” Panel Stone Grey 12” x 60” Panel Beige Desc. SW-90-1260S SW-90-1260O Item# #10 x 2-1/2” 6-Lobe Pan Head Deck Screw, 305 Stainless, T25 Drive Item# S-2.5SS305PHT25 Fasteners for SunWalk Decking: Decking Available in Oak (Beige) or Stone (Grey) x6 per Panel Needed x8 per Panel Needed x10 per Panel Needed x16 per Panel Needed Wood Sealer Decking 800.677.4710 www.DockBuilders.com 60 61

Item#

TerraTex HD Filter Fabric

TerraTex HD is a non-biodegradable, woven geotextile, made up of polypropylene fibers. It is a high-strength, robust fabric, engineered for stabilization applications in more severe soil conditions.

TerraTex HD is recommended for use beneath riprap and interlocking concrete blocks. It can also be used behind seawalls in areas with sandy soils. If you reside in an area with clay or other non-porous soils, please contact our knowledgeable sales staff for alternative fabrics that will better suit your needs.

HDG Tieback Rods

Tieback rods are hot dipped galvanized horizontal rods that are used to reinforce retaining walls and sea walls. One end of the rod gets secured to the wall and the other gets anchored to a stable structure, such as a concrete deadman, that is anchored beneath the ground with sufficient resistance.

The tieback/deadman system resists forces, such as backfilled soils plus rainwater, that would otherwise cause the wall to lean. Always consult an engineer to be certain the tie rods you select are appropriately sized for your project.

The threaded ends of our tieback rods are manufactured with rolled threads as opposed to cut threads. This process allows us to utilize a slightly smaller body diameter rods offering greater cost savings over cut thread rods.

Hex Bolt HDG Carriage Bolt HDG Common Nails HDG

FF-06

FF-09

FF-12

FF-06360

FF-09258

FF-12360

FF-18258

Description

roll

8¾’ wide x 258’ long roll

12½’ wide x 360’ long roll

17½’ wide x 258’ long roll

HDG Plate Washers & Hex Nuts

W-2258C

W-3358

W-3358C

W-3334

W-3334C

W-33-1.0

W-66-.25-.625

W-66-.25-.750

W-66-.25-1.00

W-66-.50-1.00

HN-58

HN-34

HN-1.0

Square w/ 9/16” Hole (for 1/2 ” Tieback)

Square w/ 11/16” Hole (for 5/8 ” Tieback)

Curved w/ 11/16” Hole (for 5/8 ” Tieback)

Square w/ 11/16” Hole (for 5/8 ” Tieback)

Curved w/ 11/16” Hole (for 5/8 ” Tieback)

Square w/ 13/16” Hole (for 3/4” Tieback)

Curved w/ 13/16” Hole (for 3/4” Tieback)

Square w/ 11/16” Hole (for 1” Tieback)

Square w/ 11/16 ” Hole (for 5/8 ” Tieback)

Square w/ 13/16” Hole (for 3/4” Tieback)

Square w/ 11/16” Hole (for 1” Tieback)

Square w/ 11/16” Hole (for 1” Tieback)

Description Item#

3/8 ” x 2½” w/ 1” Thread

3/8 ” x 3” w/ 1” Thread

3/8 ” x 4½” w/ Full Thread

3/8 ” x 5½” w/ 1” Thread

3/8 ” x 6” w/ Full Thread

½” x 3” w/ 1¼” Thread

½” x 3½” w/ 1¼” Thread

½” x 4” w/ 1¼” Thread

½” x 4½” w/ 1¼” Thread

½” x 5” w/ 1¼” Thread

½” x 6” w/ 1¼” Thread

½” x 8” w/ 6” Thread

½” x 10” w/ 6” Thread

Hex Lag Bolt HDG

Nuts & Washers HDG

HB-5816

HB-5818

HB-5820

HB-5822

HB-5824

HB-34035

HB-3404

HB-34055

HB-3406

HB-3410

HB-3412

HB-3414

HB-3416

HB-3418

w/ 6” Thread

5/8 ” x 14” w/ 6” Thread

5/8 ” x 16” w/ 6” Thread

5/8 ” x 18” w/ 6” Thread

5/8 ” x 20” w/ 6” Thread

5/8 ” x 22” w/ 6” Thread

5/8 ” x 24” w/ 6” Thread

3/4” x 3½” w/ 2” Thread

3/4” x 4” w/ 2”

Fasteners - Galvanized
Description Item# CB-12015 CB-1203 CB-1204 CB-12045 CB-1205 CB-1206 CB-1207 CB-1208 CB-1210 CB-1212 CB-1214 CB-1216 CB-5810 CB-5812 CB-5814 CB-5816 ½” x 1½” w/ Full Thread ½” x 3” w/ Full Thread ½” x 4” w/ Full Thread ½” x 4½” w/ Full Thread ½” x 5” w/ Full Thread ½” x 6” w/ Full Thread ½” x 7” w/ 6” Thread ½” x 8” w/ 6” Thread ½” x 10” w/ 6” Thread ½” x 12” w/ 6” Thread ½” x 14” w/ 6” Thread ½” x 16” w/ 6” Thread 5/8 ” x 10” w/ 6” Thread 5/8 ” x 12” w/ 6” Thread 5/8 ” x 14” w/ 6” Thread 5/8 ” x 16” w/ 6” Thread Description Item# N-16DGC-05 N-16DGC-25 N-16DGC-50 N-20DGC-05 N-20DGC-25 N-20DGC-50 N-30DGC-05 N-30DGC-25 N-30DGC-50 N-60DGC-05 N-60DGC-25 N-60DGC-50 16d 3½” long 5 lbs 16d 3½” long 25 lbs 16d 3½” long 50 lbs 20d 4” long 5 lbs 20d 4” long 25 lbs 20d 4” long 50 lbs 30d 4½” long 5 lbs 30d 4½” long 25 lbs 30d 4½” long 50 lbs 60d 6” long 5 lbs 60d 6” long 25 lbs 60d 6” long 50 lbs Description Item# LB-1403 LB-1405 LB-51604 LB-38025 LB-3803 LB-3804 LB-3805 LB-3806 LB-3808 LB-1203 LB-1204 LB-1205 LB-1206 LB-1207 LB-1208 LB-5804 LB-5806 LB-5808 1/4” x 3” 1/4” x 5” 5/16” x 4” 3/8 ” x 2½” 3/8 ” x 3” 3/8 ” x 4” 3/8 ” x 5” 3/8 ” x 6” 3/8 ” x 8” 1/2 ” x 3” 1/2 ” x 4” 1/2 ” x 5” 1/2 ” x 6” 1/2 ” x 7” 1/2 ” x 8” 5/8 ” x 4” 5/8 ” x 6” 5/8 ” x 8” HB-38025 HB-3803 TB-38045 HB-38055 TB-3806 HB-1203 HB-12035 HB-1204 HB-12045 HB-1205 HB-1206 HB-1208 HB-1210 HB-1212 HB-1214 HB-1216 HB-58025 HB-5803 HB-58045 HB-5808 HB-5810 HB-5812 HB-5814
5
8
5/8
5/8
/8
/8
½” x 12” w/ 6” Thread ½” x 14” w/ 6” Thread ½” x 16” w/ 6” Thread 5/8 ” x 2½” w/ 1½” Thread
/
” x 3” w/ 1½” Thread
” x 4½” w/ 1½” Thread
” x 8” w/ 6” Thread 5
” x 10” w/ 6” Thread 5
” x 12”
Thread 3/4” x 5½” w/ 2” Thread 3/4” x 6” w/ Full Thread 3/4” x 10” w/ 6” Thread 3/4” x 12” w/ 6” Thread 3/4” x 14” w/ 6” Thread 3/4” x 16” w/ 6” Thread 3/4” x 18” w/ 6” Thread Description Item# HN-516 HN-38 HN-12 HN-58 HN-34 HN-1.0 W-14 W-516 W-38 W-38GF W-12 W-12L W-58 W-58L W-34 W-34L W-1.0 5/16” Hex Nut 3/8 ” Hex Nut 1/2 ” Hex Nut 5/8 ” Hex Nut 3/4” Hex Nut 1” Hex Nut 1/4” Round Flat Washer 5/16” Round Flat Washer 3/8 ” Round Flat Washer 3/8 ” x 1½” Fender Washer 1/2 ” Round Flat Washer 1/2 ” Lock Washer 5/8 ” Round Flat Washer 5/8 ” Lock Washer 3/4” Round Flat Washer 3/4” Lock Washer 1” Round Flat Washer
Seawall Products
6¼’
8¾’
12½’ wide
6¼’ wide
360’ long
wide (By The Linear Foot)
wide (By The Linear Foot)
(By The Linear Foot)
x
Description Item# 2” x 2” x 1/8 ” 2¼” x 2¼” x 3/16 ” 2¼” x 2¼” x 3/16 ” 3” x 3” x 1/4 ” 3” x 3” x 1/4 ” 3” x 3” x 1/4 ” 3” x 3” x 1/4 ” 3” x 3” x 1/4 ” 6” x 6” x 1/4 ” 6” x 6” x 1/4 ” 6” x 6” x 1/4 ” 6” x 6” x 1/2 ” 5/8 ” Hex Nut HDG 3/4” Hex Nut HDG 1” Hex Nut HDG W-2212 W-2258
5/8 ” x 10’ (6” Thread both ends) 5/8 ” x 12’ (6” Thread both ends) 3/4” x 12’ (6” Thread both ends) 1” x 12’ (6” Thread both ends) 1” x 16’ (6” Thread both ends) Description TR-.625-120 TR-.625-144 TR-.750-144 TR-1.000-144 TR-1.000-192 Item# 5/8 ” 5/8 ” 3/4 ” 1” 1” Thread Diameter 0.562” 0.562” 0.680” 0.912” 0.912” Rod Diameter Seawall Products Fasteners - Galvanized 800.677.4710 www.DockBuilders.com 62 63

Type 304, 305 and 316 stainless steels are nickel/chromium, austenitic grades of stainless steel and are inherently non-magnetic.

Type 304 and 305 provide more than adequate corrosion protection in most commonly encountered applications.

Type 316 contains slightly more nickel than 304 and 2-3% molybdenum giving it better resistance to corrosion than 304, especially in chloride environments that tend to cause pitting. It offers superior performance when exposed to sea water and resists corrosion from sulfuric acid compounds.

Hex Bolt SS Type 304

Carriage Bolt SS Type 304

Ring Shank Nails SS Type 304

Ring Shank Nails SS Type 316

Roofing Nails SS Type 304

N-03DSS304-05 N-03DSS304-25 N-04DSS304-01

N-04DSS304-05

N-04DSS304-25

Ring Strip Nails SS Type 304

long 5 lbs

long 25 lbs

long 5 lbs

1½” long 25 lbs

Roofing Nails SS Type 316

Item#

Decking Screws SS Type 305

N-03DSS316-01

N-03DSS316-05

N-03DSS316-25

N-04DSS316-01

N-04DSS316-05

N-04DSS316-25

Driver Bits

Fasteners

Description

1¼” long 1 lb

1¼” long 5 lbs

1¼” long 25 lbs

1½” long 1 lb

1½” long 5 lbs

1½” long 25 lbs

Composite Screws SS Type 305

Hand-Drive Composite Decking Screws

• Unique thread form removes exhaust while driving to prevent “mushrooming” of composite decking

• Type 17 point for fast starts

• T20 Torx drive helps deliver more torque, more resistance to ‘camming’

• Small .344 head diameter is less visible

500ct. #10 x 2½” 1,000ct. #10 x 2½” 2,000ct.

Pan Head Screw SS Type 305

#10 x 2-1/2” 6-Lobe Pan Head Deck Screw, 305 Stainless, T25 Drive

Description Item# S-2.5SS316T25-0100 S-2.5SS316T25-0500 S-2.5SS316T25-1000 S-2.5SS316T25-1500 S-3SS316T25-0100 S-3SS316T25-0500 S-3SS316T25-1000 S-3SS316T25-1500 #10 x 2½” 100ct. #10 x 2½” 500ct. #10 x 2½” 1,000ct. #10 x 2½” 1,500ct. #10 x 3” 100ct. #10 x 3” 500ct. #10 x 3” 1,000ct. #10 x 3” 1,500ct.
Decking Screws SS Type 316
Description Item# N-08DSS316R-01 N-08DSS316R-05 N-08DSS316R-25 N-10DSS316R-01 N-10DSS316R-05 N-10DSS316R-25 N-12DSS316R-01 N-12DSS316R-05 N-12DSS316R-25 N-16DSS316R-01 N-16DSS316R-05 N-16DSS316R-25 N-20DSS316R-01 N-20DSS316R-05 N-20DSS316R-25 Description Item# N-08DSS304R-01 N-08DSS304R-05 N-08DSS304R-25 N-10DSS304R-01 N-10DSS304R-05 N-10DSS304R-25 N-12DSS304R-01 N-12DSS304R-05 N-12DSS304R-25 N-16DSS304R-01 N-16DSS304R-05 N-16DSS304R-25 N-20DSS304R-01 N-20DSS304R-05 N-20DSS304R-25 N-60DSS304R-25 8d 2½” long 1 lb 8d 2½” long 5 lbs 8d 2½” long 25 lbs 10d 3” long 1 lb 10d 3” long 5 lbs 10d 3” long 25 lbs 12d 3¼” long 1 lb 12d 3¼” long 5 lbs 12d 3¼” long 25 lbs 16d 3½” long 1 lb 16d 3½” long 5 lbs 16d 3½” long 25 lbs 20d 4” long 1 lb 20d 4” long 5 lbs 20d 4” long 25 lbs 60d 6” long 25 lbs 8d 2½” long 1 lb 8d 2½” long 5 lbs 8d 2½” long 25 lbs 10d 3” long 1 lb 10d 3” long 5 lbs 10d 3” long 25 lbs 12d 3¼” long 1 lb 12d 3¼” long 5 lbs 12d 3¼” long 25 lbs 16d 3½” long 1 lb 16d 3½” long 5 lbs 16d 3½” long 25 lbs 20d 4” long 1 lb 20d 4” long 5 lbs 20d 4” long 25 lbs
Desc. Item# S-2.5SS305CT20-0100 S-2.5SS305CT20-0500 S-2.5SS305CT20-1000 S-2.5SS305CT20-2000 #10 x 2½” 100ct. #10 x 2½”
Description Item# N-03DSS304-01
1¼”
1¼”
1½”
1½”
long 1 lb
1¼”
long 1 lb
SS
Hex Lag SS
- Stainless Nuts & Washers
Type 304
Type 304
Description Item# N-SSRingStrips3.25x.120 Type 304 SS Full Round Head Strip Nails 3¼” x .120 (4,000 per box)
Fits most tools with 20-22° angle Description Item# Driver-T25-2 Driver-T20-2 Driver-SQ2-2 Driver-PH2-2 T-25 Torx, 2” long T-20 Torx, 2” long #2 Square, 2” long #2 Phillips, 2” long Description Item# TB-51604SS TB-3803SS TB-3804SS TB-3805SS TB-1203SS TB-1204SS TB-1205SS TB-1206SS HB-1210SS HB-1212SS HB-1214SS HB-1216SS HB-5810SS HB-5812SS HB-5814SS HB-5816SS 5/16” x 4” w/ Full Thread Type 304 3/8 ” x 3” w/ Full Thread Type 304 3/8 ” x 4” w/ Full Thread Type 304 3/8 ” x 5” w/ Full Thread Type 304 1/2 ” x 3” w/ Full Thread Type 304 1/2 ” x 4” w/ Full Thread Type 304 1/2 ” x 5” w/ Full Thread Type 304 1/2 ” x 6” w/ 6” Thread Type 304 1/2 ” x 10” w/ 6” Thread Type 304 1/2 ” x 12” w/ 6” Thread Type 304 1/2 ” x 14” w/ 6” Thread Type 304 1/2 ” x 16” w/ 6” Thread Type 304 5/8 ” x 10” w/ 6” Thread Type 304 5/8 ” x 12” w/ 6” Thread Type 304 5/8 ” x 14” w/ 6” Thread Type 304 5/8 ” x 16” w/ 6” Thread Type 304 Description Item# W-516SS W-516SSL W-516 x1.5SSF W-38SS W-38SSF W-38SSF-.187 W-38SSL W-12SS W-12SSL W-58SS HN-516SS HN-516SSL HN-38SS HN-38SSL HN-12SS HN-12SSL HN-58SS HN-58SSL 5/16” Round Flat Washers 5/16” Lock Washers 5/16” x 1½” Fender Washer 3/8 ” Round Flat Washers 3/8 ” x 1½” Fender Washers 3/8 ” x 1½” Fender Wash Heavy Duty 3/8 ” Lock Washers 1/2 ” Round Flat Washers 1/2 ” Lock Washers 5/8 ” Round Flat Washers 5/16” Hex Nut 5/16” Nylon Lock Nut 3/8 ” Hex Nut 3/8 ” Nylon Lock Nut 1/2 ” Hex Nut 1/2 ” Nylon Lock Nut 5/8 ” Hex Nut 5/8 ” Nylon Lock Nut Desc. Item# S-2.5SS305PHT25-0100 S-2.5SS305PHT25-0500 S-2.5SS305PHT25-1000 #10 x 2½” 100ct. #10 x 2½” 500ct. #10 x 2½” 1,000ct. Description Item# LB-516015SS LB-51602SS LB-51604SS LB-38025SS LB-3803SS LB-3804SS LB-3805SS LB-3806SS LB-1203SS LB-1204SS LB-1205SS LB-1206SS LB-1207SS LB-5806SS LB-5808SS 5/16” x 1½” 5/16” x 2” 5/16” x 4” 3/8 ” x 2½” 3/8 ” x 3” 3/8 ” x 4” 3/8 ” x 5” 3/8 ” x 6” 1/2 ” x 3” 1/2 ” x 4” 1/2 ” x 5” 1/2 ” x 6” 1/2 ” x 7” 5/8 ” x 6” 5/8 ” x 8” Description Item# CB-1203SS CB-12045SS CB-1208SS CB-1210SS CB-1212SS CB-1214SS CB-1216SS CB-5810SS CB-5812SS CB-5814SS CB-5816SS 1/2 ” x 3” w/ Full Thread 1/2 ” x 4½” w/ Full Thread 1/2 ” x 8” w/ 6” Thread 1/2 ” x 10” w/ 6” Thread 1/2 ” x 12” w/ 6” Thread 1/2 ” x 14” w/ 6” Thread 1/2 ” x 16” w/ 6” Thread 5/8 ” x 10” w/ 6” Thread 5/8 ” x 12” w/ 6” Thread 5/8 ” x 14” w/ 6” Thread 5/8 ” x 16” w/ 6” Thread Description Item# S-1.25SS305T25-0100 S-1.25SS305T25-0500 S-1.25SS305T25-1000 S-2.5SS305T25-0100 S-2.5SS305T25-0500 S-2.5SS305T25-1000 S-2.5SS305T25-1500 S-3SS305T25-0100 S-3SS305T25-0500 S-3SS305T25-1000 S-3SS305T25-1500 #10 x 1¼” 100ct. #10 x 1¼” 500ct. #10 x 1¼” 1,000ct. #10 x 2½” 100ct. #10 x 2½” 500ct. #10 x 2½” 1,000ct. #10 x 2½” 1,500ct. #10 x 3” 100ct. #10 x 3” 500ct. #10 x 3” 1,000ct. #10 x 3” 1,500ct. Fasteners - Stainless Steel Fasteners - Stainless Steel 800.677.4710 www.DockBuilders.com 64 65

Muro Auto-Feed Corded Screw Gun

The Muro Screw Gun is the time-saving tool that truly stands on its own. Built with industrial strength for the discerning contractor, this one-piece system has no awkward attachments.

No pre-drilling of wood required, which means tremendous labor and time savings on every job.

Features:

Muro Coiled Auto-Feed Screws

Recommended for installing pressure-treated wood decking (CCA or ACQ) and high-acetic woods such as redwood and cedar. Type 17 point reduces splitting.

BarnaPole

Recommended for installing most types of composite decking.

Work While Standing!

• Extension T-Handle: Fully Adjustable, Allows for Ergonomic Operation

• Adjustable Depth Control for Repeatable Countersinking

• Drives 1” to 3” Screws - Slight Adjustment Required

• Reversible Drive

• No More Dropped or Lost

Screws

• Ergonomically Friendly - Avoids

Bending for Every Single Screw

• Quick Changing Double-Ended Bits, No Tools Needed

• 150 Screws Per Coil

Recommended by some manufacturers of composite decking or in applications where a low-profile screw head is desired.

Dock Pro

Dock Cart

The Dock Pro Dock Cart is the easiest way to carry all of your gear from your garage or car to your boat.

Muro Driver

Recommended for installing Ipe, Cumaru, and other higher density hard woods. Also works on higher density composites in freezing temperatures.

Recommended Applications:

Decking

Sub Floor

Underlayment

Backer Board

Recommended for installing pressure-treated wood decking (CCA or ACQ). Not recommended for cedar, redwood, or salt water environments.

The Barnapole barnacle removal tool is an innovative device used to scrape barnacles, oysters, mussels and other crustaceans from your seawall or dock pilings. The Barnapole easily attaches to any standard-threaded pole. The Barnapole’s curved and flat scraper blades are made of solid stainless steel, and the handle attachment block is made from a solid aluminum extrusion allows the Barnapole to withstand harsh marine environments. The Barnapole is engineered specifically for pilings and seawalls and can remove up to 9 inches of buildup with each pass, saving you time and money. Also, Barnapole is designed to be used from the top of your dock, so there is no need for you to get in the water!

Item# Barnapole-II (Handle not included)

Ship Auger & Spade Bits

The curved handle design reduces bending-over, making the Dock Pro dock cart easier to handle than conventional carts, while the unique angled tub feature provides better leg clearance for maneuvering.

Features a spacious 7 cu. ft. heavy wall roto-molded polytub that will not rust or rot. Zinc-coated, corrosion-resistant hardware is used throughout. Plastic rim wheels with roller bearings and solid tires will stand up to the harshest marine environment.

” x 18”

11/16” x 24”

3/4” x 24”

13/16” x 24”

11/16” x 30”

3/4” x 30”

13/16” x 30”

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 14” twist length

7/16” Hex Shank) with 20” twist length

7/16” Hex Shank) with 20” twist length

7/16” Hex Shank) with 20” twist length

7/16” Hex Shank) with 26” twist length

7/16” Hex Shank) with 26” twist length

7/16” Hex Shank) with 26” twist length

Mechanical Specifications

/

Tools

Specialty
*Type 305 stainless steel is a nickel-chromium austenitic grade of stainless steel that is suitable for use in many corrosive environments. Type 316 stainless steel is a nickel-chromium austenitic grade of stainless steel with 2-3% Molybdenum that provides a higher level of corrosion resistance, especially in ocean salt-air environments.
WB-.562 WB-.687 WB-.812 Item # Desc. 9/16” x 6” (3/16” Hex Shank) 11/16” x 6” (3/16” Hex Shank) 13/16” x 6” (3/16” Hex Shank) SA-.43718 SA-.56218 SA-.62518 SA-.68718 SA-.75018 SA-.81218 SA-.87518 SA-.93718 SA-1.00018 SA-1.12518 SA-1.25018 SA-1.37518 SA-1.50018 SA-.68724 SA-.75024 SA-.81224 SA-.68730 SA-.75030 SA-.81230 Item # Description 7/16” x 18” 9/16” x 18” 5/8 ” x 18” 11/16” x 18” 3/4” x 18” 13/16” x 18” 7/8 ” x 18” 15/16” x 18” 1” x 18” 11/8 ” x 18” 11/4” x 18” 13/8 ” x 18” 11/2
Holes
1
2
5
8
3
4”
for
” Bolts
/
” Bolts
/
Bolts
Speed: Current: Weight: Volts: Power Cord: 2300 RPM 5.0 Amp 11.25 lbs 115V 9’
Item# M-CX0212SLP M-CX0212SLP-316 M-CX0300SEP M-CX0300SEP-316 Desc. #10 x 2½” #10 x 2½” #10 x 3” #10 x 3” 1,800ct. 1,800ct. 900ct. 900ct. SS 305* SS 316* SS 305* SS 316* T-20 T-20 T-20 T-20 Item# M-TX0212SFD M-TX0212SFD-316 M-TX0300SEP Desc. #10 x 2½” #10 x 2½” #10 x 3” 900ct. 900ct. 900ct. SS 305* SS 316* SS 305* T-20 T-20 T-20 Item# M-YS8212SLP M-YS7300SEP-WP Desc. #8 x 2½” #7 x 3” 900ct. 900ct. SS 305* SS 305* T-20 T-20 Item# M-TX0212SLP-EX M-TX0300SEP-EX Desc. #10 x 2½” #10 x 3” 900ct. 900ct. SS 305* SS 305* T-20 T-20 Item# M-ES8212WLP-GY M-ES8300WEP-GY Desc. #8 x 2½” #8 x 3” 1,800ct. 900ct. Ceramic Ceramic Sq #2 Sq #2
Docks
7¼” M-TX207114 M-SQR27114 Double-Ended #2 LP-Sq Drive T20 Torx Drive T25 Torx Drive Desc. M-SQR27114 M-TX207114 M-TX257114 Item#
TM
Item# DC-1060ST Gray or Tan Available Item# M-TX0212CLP-GY M-TX0212CLP-TN Desc. #10 x 2½” #10 x 2½” 900ct. 900ct. Ceramic Ceramic T-20 T-20
Specialty Fasteners & Tools Tools 800.677.4710 www.DockBuilders.com 66 67
Item# Muro-FDVL42E
Head Screws Stainless Exotic
Ceramic
150 Screws Per Coil
Recommended for installing lower density, composite decking. Not recommended for salt water environments. Type 17 point reduces splitting.
Ceramic Composite Screws
Stainless Wood Screws
Stainless Composite Screws Stainless Trim
Hardwood Screws
Wood Screws (Gray)

Phone: 1.800.677.4710 (Mon-Fri 8-5 EST)

Fax: 1.800.734.0335

Online: www.dockbuilders.com

The Terms and Conditions of Sale apply to all products ordered from Dock Builders Supply.

Orders

To facilitate filling your order, please be as specific as possible. Orders must specify product number, quantity desired, and any descriptive information (e.g. size or color). Every effort will be made to fulfill all orders; however, we cannot guarantee the availability of any particular product displayed in our catalog.

Back Orders

We strive to keep backorders to a minimum, but occasionally we may be temporarily out of an item. Items that are out of stock at the time your order is processed will be backordered. Dock Builders Supply will do its best to inform you of any delays that it is made aware of, but will not be held liable for late delivery, missed shipments, installation delays, or other related deadlines out of its control.

Special Orders

Please let us know if there is something you need that is not listed in our catalog. We can often special order those items for you. Special orders are non-returnable and are non-refundable.

Prices

Current pricing for all of the available products in our catalog can be found on our website at www.dockbuilders.com. Prices are FOB shipping point and do not include freight, applicable federal, state or local taxes, customs duties, brokerage fees, or export packing charges. Prices, specifications and availability of items are subject to change without notice.

Volume Discounts

Please call us when you need large quantities of an item. We may be able to offer you special, discounted volume pricing based on the quantity required.

Payments and Terms

We accept Visa, MasterCard, Discover, American Express, PayPal, wire transfers, money orders, cashier’s checks, personal checks, and company checks in U.S. Dollars only. All payment accounts, with the exception of wire transfers, must be issued by a US bank or financial institution and must have a billing address in the US. Payments can only be processed if the billing information can be verified. For personal and company checks, please allow up to 10 banking days after receipt for clearance of funds before the order is processed. We cannot guarantee the availability of a product by the time funds clear or payment is received. All returned checks (paper or electronic) are subject to a service fee of $35.00 or 5% of the face amount of the check, whichever is greater. We reserve the right to exclude or limit certain payment methods at any time.

Special volume priced quotes may be limited to certain payment methods.

Unless satisfactory credit terms are established in advance by execution of a separate credit agreement, payment for goods is required at the time of ordering. Dock Builders Supply reserves the right to charge a finance charge up to 1.5% per month (18% annually) of any order which remains unpaid after the invoice date. Customer agrees to reimburse Dock Builders Supply for reasonable attorneys’ fees and any other costs associated with collecting delinquent payments.

Gift Certificates

We issue gift certificates in the amount of $50 or more, and mail them to either you or the recipient, along with a catalog. Certificates may be ordered by phone and may be paid for via credit card. Gift certificates may be redeemed in person, by phone, or by mail and only by the person named on the certificate when originally purchased. Gift certificates are valid for one year from the date of purchase.

Sales Tax Policy

The amount of tax charged on your order will depend upon many factors including the type of item purchased and destination of the shipment. Factors

800.677.4710

Terms & Conditions

US

Dock

can change between the time you place an order and the order is delivered, which could affect the calculation of sales tax. The amount appearing on your order as Estimated Tax may differ from the sales taxes ultimately charged. Where required, tax will also be applied to the shipping and handling charges. Depending on the tax laws in your state, you may be required to pay use tax on purchases for which we do not collect sales tax. If your order is tax exempt, please, send us a copy of your current sales tax exemption certificate via e-mail to accounting@dockbuilders.com or via fax to 1.800.734.0335.

Shipments

Unless you specify otherwise, we will ship your order in the most efficient way possible. If you have a preference of carrier, please tell us; we’ll honor your request if practicable. Smaller packages weighing less than 50 pounds are usually shipped via a parcel service such as FedEx or UPS, with charges prepaid and added to your invoice. Larger items are shipped via freight truck, with charges prepaid and added to your invoice. For freight truck orders, a shipping acknowledgement and verification form will be e-mailed and must be completed prior to shipment of your order. If you need your order rushed, please ask our representatives for a quote on expedited next-day or second-day air service.

Claims for Shortages or Damaged Goods

On a rare occasion, a package may be lost or damaged in transit. For your protection, you should always carefully inspect any shipment before accepting delivery. If damage has occurred, you must note it on the delivery receipt. If a freight truck shipment is damaged, you must also immediately have the shipment inspected by the carrier. Obtain an inspection report from the carrier, and forward a copy to us. All claims must be filed within 7 days of receipt of shipment. Your Dock Builders Supply representative is available to assist with this process. Please call us at 1.800.677.4710.

Returns

At Dock Builders Supply, we want you to be satisfied with your purchase. The vast majority of our products are eligible for return or exchange within 30 days of purchase provided they are unopened and unused; however, some products are not eligible for return. Products that cannot be returned or exchanged include, but are not limited to: custom colored dock sealants, aluminum gangways, piling wrap, filter fabric, mounted FlexMaster Fenders, power pedestals, 110 volt dock lighting, underwater lighting, solar illuminating buoys, and Dow Styrofoam™ Billets. In addition, orders that received special volume pricing or contain special order or custom fabricated items are also not eligible for return, unless specifically stated as such on the estimate or sales order.

If the products you purchased are eligible for return:

1. Call your Dock Builders Supply representative at 1.800.677.4710, and request an exchange, credit, or refund.

2. Your representative will issue a Return Authorization (RA) number – just include it with your package when you return it. We highly recommended that you use a shipping system that can track your shipment such as UPS or FedEx. If your order was sent to you via freight truck, then it will likely need to be returned via freight truck. All returns must be returned to Dock Builders Supply freight PREPAID. Dock Builders Supply is not responsible for freight charges on merchandise being returned for exchange, credit, or refund.

3. Exchanges, credits and refunds are typically processed within 5-10 business days following the receipt and inspection of your return. Refunds will be made using the same method and to the same credit card used on the original order. Please note all merchandise returned NON-DEFECTIVE will be charged a 15% restocking fee. Refunds are calculated based on the purchase price of the merchandise only. All shipping and handling fees are non-refundable. Merchandise returned damaged (cosmetically or otherwise) is subject to an additional fee on a case-by-case basis (please call for details). Items showing obvious signs of use are not eligible for return. Items returned with missing parts and/or accessories will be charged accordingly.

Note: Shipping costs for returns may be higher than the original shipment costs. The customer is responsible for ensuring the merchandise arrives at Dock Builders Supply in the same condition as when received.

Cancellation Policy

If you would like to cancel or change an order, you must contact us within 2 hours from the time the order was placed. We apologize, but orders placed online or over the phone begin processing immediately to ensure timely order fulfillment and shipping time. Our representatives will request a cancellation of your order at our warehouse. If successful, they will send you an email and the cancellation will be free of charge. If cancellation was not possible, the products will be delivered to you, which you will need to refuse upon receipt. The products will be returned to us and we will issue a refund for the merchandise only (including applicable tax); shipping and handling will not be refunded.

Export / International Orders

All international shipments must be prepaid in U.S. currency via bank wire transfer. Any applicable duties, taxes, and customs charges are the responsibility of the customer. Residents of Canada and most U.S. Territories may reach us by calling 1.800.677.4710. From all other areas, please email us at sales@dockbuilders.com or call us at +1.813.677.4000. It is the sole responsibility of the Client to select and work with a qualified freight forwarder in the continental United States who can assist Client with all import/export documentation and formalities in order to comply with customs regulations. Dock Builders Supply will provide the Freight Forwarder with a commercial invoice only. All Goods are assumed delivered in good condition upon delivery to such Freight Forwarder, unless Dock Builders Supply is notified within five (5) business days of delivery to Freight Forwarder. No returns will be accepted after this time.

Dock Plans and Designs

If you need help designing your floating dock or if you would like a quote based on your unique configuration requirements, please give our knowledgeable sales team a call. We can often provide you with a cost estimate and drawings that meet your needs. Please keep in mind any drawings we provide are to be used as a rough guide only. Dock Builders Supply assumes no responsibility or liability for the design, structural integrity, accuracy, or completeness of the drawings. If your project requires precise calculations or specific load requirements, you should consult with an engineer who can provide more detailed plans specific to your project.

Product Changes

Products are continually undergoing refinement in design and manufacture. Dock Builders Supply reserves the right to discontinue the sale of any product and to change pricing, terms, specifications, and warranties at any time without notice.

Product Use

Buyer is responsible for evaluating whether a product is appropriate for a particular use or application. The conditions of evaluation, selection, and use of a product can vary widely and affect the use and application of a product. Because many of these conditions are uniquely within the buyer’s knowledge and control, it is essential that buyer evaluate whether the product is suitable and appropriate for a particular use or application.

Order Acceptance

Dock Builders Supply reserves the right to cancel any order prior to delivery, at Dock Builders Supply’s sole discretion, whether or not payment was made. If payment was made and your order is cancelled, we will issue an appropriate credit to your account, or may contact you to collect information in order to do so.

Color Accuracy

We have done our best to display the colors of the products as accurately as possible in this catalog. However, due to printing limitations, we will not be held liable for variations in color. If the color of a specific product is extremely important to you, please call and ask if a sample is available before placing your order. Some products, such as our nautical hose holders and address plaques, are airbrushed by hand, so no two pieces will be exactly the same.

Misprints

At Dock Builders Supply, we strive to ensure our catalogs are correct before sending them to print, but occasionally errors do occur. Dock Builders Supply will not be held responsible for printing errors.

Local Standards and Regulations

Certain products sold by Dock Builders Supply are designed to satisfy state and federal requirements. Because local standards and regulations may vary significantly, Dock Builders Supply cannot guarantee products meet all applicable requirements in each locale. The purchaser assumes responsibility for compliance with local standards, codes, and regulations where the products will be shipped, sold and used.

Warranties

Many products sold by Dock Builders Supply are covered against defects by manufacturers’ warranties. A copy of each manufacturer’s warranty is available upon request. If you experience any product defects inside of our return period or have any questions, please call us at 1.800.677.4710. If failure of a product purchased through us occurs during the manufacturer’s warranty period, a claim for adjustment may be submitted directly to the manufacturer, or our company will assist on submitting such claims. Products sent to us for warranty consideration are accepted only under the conditions stated in the manufacturers’ policies. Please note acceptance of such items by us for submission to the manufacturer does not imply validity to any claim. All decisions regarding the repair or replacement of any items are the sole responsibility of the manufacturer. Under no circumstances are we as a distributor, authorized to replace a defective item prior to submitting such item to the manufacturer.

Disclaimer of Warranties

Dock Builders Supply disclaims all warranties either express or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose with respect to any product purchased from any Dock Builders Supply retail store, website, or catalog. Dock Builders Supply’s liability in connection with a customer’s purchase is expressly limited to Dock Builders Supply’s return policy set forth above, and all claims for consequential, incidental, or special damages are hereby excluded.

Indemnity

Neither Dock Builders Supply, nor W.R. Williams Enterprises, Inc. shall be subject to, and disclaims: (1) any obligations or liabilities arising out of breach of contract or of warranty, (2) any obligations whatsoever arising from tort claims (including negligence and strict liability) or arising under other theories of law with respect to products sold or services rendered by Dock Builders Supply, or any undertakings, acts, or omissions relating thereto, and (3) all consequential, incidental, or contingent damages whatsoever including, but not limited to, labor costs or loss of profits arising out of or in conjunction with the manufacture, sale, delivery, use of, or inability to use any products purchased from Dock Builders Supply.

Governing Law / Venue / Jurisdiction

This agreement shall be construed and enforced in accordance with the laws of the state of Florida without regard to the conflicts of law provisions thereof. ALL SALES TRANSACTIONS EXCLUDE THE APPLICATION OF THE 1980 UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALES OF GOODS, IF OTHERWISE APPLICABLE. All claims, actions, disputes, controversies or suits shall be litigated exclusively in the courts of competent jurisdiction in Hillsborough County, Florida, United States. Each party specifically consents to service of process by and the jurisdiction of and venue in those courts and Customer, if not a resident of the United States, hereby appoints the Secretary of State of Florida as its agent for service of process in the United States.

Phone: 1.800.677.4710 (Mon-Fri 8-5 EST) Fax: 1.800.734.0335 Online: www.dockbuilders.com Email: sales@dockbuilders.com US Mail: Dock Builders Supply PO Box 3450 Apollo Beach, FL 33572
Mail:
Email: sales@dockbuilders.com Builders
Supply PO Box 3450 Apollo Beach, FL 33572
www.DockBuilders.com 68 69
Terms & Conditions Terms & Conditions
Index Aluminum Gangways ................................................ 26 Aluminum Ladders .............................................. 28-29 Anchor Rods ................................................................. 62 Auger Bits ...................................................................... 67 Axles ........................................................................ 21, 25 BarnaPole ....................................................................... 67 Boat Boxes ............................................................. 58-59 Bolts .......................................................................... 63-64 Bumpers .................................................................. 32-35 Buoys, Marker ......................................................... 52-54 Buoys, Mooring ............................................................ 40 Cable Ties ..................................................................... 31 Caps, Post ..................................................................... 30 Carriage Bolts ......................................................... 63-64 Carts, Dock .................................................................... 67 Chain Retainer ............................................................. 23 Cleats .............................................................................. 41 Coatings & Sealants .................................................. 60 Corner Bumpers ................................................... 32-33 Deck Sealants ............................................................. 60 Decking (SunWalk™) ................................................ 61 Dock Boxes ............................................................ 58-59 Dock Bumpers ........................................................ 32-35 Dock Carts .................................................................... 67 Dock Edging (Bumpers) ....................................... 32-35 Dock Flotation ......................................................... 6-17 Dock Hardware Angle Brackets .................................................. 20 Angle Clip ........................................................... 20 Axles .............................................................. 21, 25 Backup Plates ..................................................... 20 Carriage Bolt Sets ............................................. 21 Chain Hoop Pile Holder ................................. 23 Chain Retainer ................................................... 23 Connector Pin Set ............................................ 19 Finger Deck Stabilizer .................................... 23 Gangway Hinges ......................................... 19-21 Gangway Rollers ................................................ 21 Hoop Pile Holders ..................................... 23-25 Inside Corners ................................................... 19 Internal Pile Guides ......................................... 24 Outside Corner End ......................................... 19 Outside Corner Male ....................................... 19 Outside Corner Female ................................... 19 Outside Corner Male / Female .................... 19 Piling Hoops / Guides ............................... 23-25 Pipe Holders ...................................................... 22 Pipe Stand-Off Brackets ................................... 22 Ramp Rollers ..................................................... 21 Roller Assembly ............................................... 25 Splice Plate .......................................................... 20 T-Connectors .................................................... 20 Washer Plate ..................................................... 20 Wheels (gangway/ramp) ................................ 21 Dock Ladders ........................................................ 28-29 Dock Lighting ........................................................ 47-51 Dock Wheels ................................................................. 33 DOW™ Styrofoam™ Billets ...................................... 11 DPI Floats™ ................................................................. 6-7 Drill Bits ......................................................................... 67 Driver Bits .............................................................. 64, 66 Eagle Floats™ .......................................................... 12-15 Encapsulated Dock Floats ................................... 6-17 EPS Encapsulated Floats ...................................... 6-17 Fabric (TerraTex™ Filter Fabric) ................................. 62 Fasteners - Galvanized Carriage Bolts HDG ........................................... 63 Common Nails HDG .......................................... 63 Hex Cap Bolts HDG .......................................... 63 Hex Lag Bolts HDG .......................................... 63 Hex Nuts HDG ............................................. 62-63 Washers HDG ............................................... 63 Fasteners - Stainless Steel Carriage Bolts SS ............................................... 64 Decking Screws SS ...................................... 65-66 Hex Cap Bolts SS .............................................. 64 Hex Lag Bolts SS .............................................. 64 Hex Nuts SS ........................................................ 64 Muro™ Screws SS .............................................. 66 Ring Shank Nails SS ..................................... 65 Washers SS .......................................................... 64 Fenders / Fender Brackets ............................... 34-35 Fiberglass Dock Boxes ........................................ 58-59 Filter Fabric (TerraTex™) ........................................... 62 Firehouse™ .................................................................... 44 Fish Attraction Lights ................................................ 55 Fish Cleaning Stations ....................................... 56-57 Flexmaster™ Fenders .......................................... 34-35 Float Drums ............................................................... 6-17 Floating Docks Dock Floats ..................................................... 6-17 Dock Plans ............................................................ 5 Dock Hardware ........................................... 18-25 Dock Photos ................................................... 2, 4 Flotation DPI Floats™ ........................................................ 6-7 Eagle Floats™ ................................................ 12-15 Lift Tanks ............................................................. 16 Permafloat™ ..................................................... 8-10 Styrofoam™ Billets ............................................ 11 Wave Attenuators ............................................. 17 Gangways Aluminum Gangways ...................................... 26 Wood Gangway Hinges ............................. 19-21 Wood Gangway Rollers ................................... 21 Green Fish Attraction Lights .................................. 55 Guides, Piling ......................................................... 23-25 Hatteras™ Power Pedestal ...................................... 42 Hex Bolts / Washers / Nuts ................................. 62-64 Hinges ....................................................................... 19-21 Hoop Pile Holders ................................................ 23-25 Hose Holders ............................................................. 27 Hose Stanchions ......................................................... 27 Inflatable Dock Bumpers .......................................... 33 Inflatable Dock Wheels ............................................. 33 Internal Pile Guides ................................................... 24 Ladders, Aluminum ............................................. 28-29 Lift Tanks ....................................................................... 16 Lighthouse™ Power Pedestals ............................... 43 Lighting 110V Lights .................................................... 47 Fish Attraction Lights ...................................... 55 Marine Warning lights .............................. 51-54 Solar Lights ................................................... 48-54 Underwater Lights ........................................... 55 Line Holders ................................................................. 30 Marker Buoys ......................................................... 52-54 Marker Buoys, Illuminated ................................. 53-54 Marker Buoys, Solar Powered ........................... 53-54 Mooring Products Internal Pile Guides ........................................ 24 Mooring Buoys .................................................. 40 Mooring Snubbers ........................................... 40 Mooring Whips™ .............................................. 39 Pipe Holders .................................................... 22 Pile Hoops ................................................... 23-25 SlideMoor™ ................................................... 36-37 TideSlides™ ......................................................... 38 Muro™ Screw Gun & Screws .................................. 66 Nails ........................................................................... 63-65 Permafloat™ ............................................................... 8-10 Piling Caps .................................................................... 30 Piling Hoops/Guides ............................................ 23-25 Piling Scraper (BarnaPole) ...................................... 67 Piling Wrap .................................................................... 31 Pipe Brackets ............................................................... 22 Pipe Holders .................................................................. 22 Power Pedestals Admiral™ SS ........................................................ 44 Firehouse™ .......................................................... 44 Hatteras™ Light ................................................. 42 Lighthouse / Lighthouse™ SS ....................... 43 Newport Harbor Mate™ .................................. 42 Slimline Dockside™ ........................................... 46 Standard Dockside™ ........................................ 46 Replacement Parts ....................................... 45 Ramps Aluminum Ramps ............................................. 26 Wood Ramp Hinges ................................... 19, 21 Wood Ramp Rollers ......................................... 21 Recycled Plastic Lumber .................................... 35 Retaining Wall Products ............................................ 62 Rollers Gangway .............................................................. 21 Piling Hoop/Guide ........................................... 25 Rope Catchers ............................................................. 30 Rub Rail (Dock Bumper) ....................................... 32-35 Screw Gun ..................................................................... 66 Screws ....................................................................... 65-66 Seawall Products Filter Fabric (TerraTex™) .................................. 62 Plate Washers & Hex Nuts ............................ 62 Tieback Rods ...................................................... 62 Sealants (Wood Sealants) .......................................... 60 Ship Augers & Spade Bits ......................................... 67 SlideMoor™ .............................................................. 36-37 Slimline™ Power Pedestals ........................................ 46 Solar Lighting ........................................................ 48-51 Spade Bits ..................................................................... 67 Standoff Brackets ....................................................... 22 Storage Boxes ........................................................ 58-59 Styrofoam™ Billets ...................................................... 11 SunWalk Decking Panels ........................................... 61 TerraTex™ HD (Filter Fabric) ....................................... 62 TideSlides™ .................................................................... 38 Tieback Rods ................................................................ 62 Tools Auto-Feed Screw Gun (Muro™) ................... 66 Barnapole ............................................................ 67 Ship Augers ........................................................ 67 Spade Bits ........................................................... 67 Underwater Dock Lights .......................................... 55 Utility Posts (Water) ....................................... 27 Utility Posts (Electric) ........................................... 42-46 Vinyl Bumper .......................................................... 32-35 Warning Lights, Marine ..................................... 51-54 Washers / Nuts ...................................................... 62-64 Water Hose Holders ............................................ 27 Water Stanchions ........................................................ 27 Wave Attenuators ....................................................... 17 Wheels Gangway / Ramp Wheels ............................... 21 Dock Bumper Wheels .................................... 33 WoodRx™ ...................................................................... 60 Wood Sealants ............................................................. 60 Index Index 800.677.4710 www.DockBuilders.com 70 71 If
you don’t see the product you’re looking for, give us a call! 1.800.677.4710
P.O. Box 3450 • Apollo Beach, FL 33572 6202 Powell Rd • Gibsonton, FL 33534 Phone: 813.677.4000 • Fax: 813.677.1516 Toll Free: 800.677.4710 • Fax: 800.734.0335 E-Mail: sales@dockbuilders.com www.DockBuilders.com

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.