Sign Station

Prinect Signa Station

Training Documents

Š Print Media Academy

IMPORTANT NOTICE:

The information in this document is confidential and proprietary to Heidelberger Druckmaschinen AG and may be legally privileged.

Any review, printing, copying, use or distribution of this document is prohibited without the written allowance of Heidelberger Druckmaschinen AG and may be a criminal offense. If you have received this document in error, please notify Heidelberger Druckmaschinen AG immediately.

Print Media Academy – Content

Content Introduction

Compatibility and requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Requirements for OS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Hardware requirements: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Workflow requirements: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Starting Signa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Versions and options of Prinect Signa Station 3 . . . . . . . . . . . . . . . . . . . . .3

Valid character set for names in Prinect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Affected functions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Valid characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Invalid characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Signa behavior when invalid characters are encountered . . . . . . . . . . . . .4 Chapter 1: Menu overview

File menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Edit menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Jobs & Resources menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Tools menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Services menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Help menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Tool bar overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Chapter 2: Exercise 1 – Autom. Imposition

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Creating a new Signa job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Saving a Signa job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Importing PDF documents and assigning them to the Signa job . . . . . . .24 Printing the Signa job as PDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Chapter 3: Exercise 2 – Format Customization

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Changing the format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Saving a Signa job as template for the Assistant . . . . . . . . . . . . . . . . . . .38 Creating a new Signa job with a template for the Assistant . . . . . . . . . . .42

I

II

Content – Print Media Academy

Chapter 4: Exercise 3 – Plate templates and marks

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Surfaces: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Creating marks using the Marks Editor . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Import color control bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Creating a composite mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Editing and saving plate templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Chapter 5: Exercise 4 – Imposition

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Surfaces: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Creating a new Signa job in the Imposition mode . . . . . . . . . . . . . . . . . . .71 Chapter 6: Exercise 5 – Job Part/Autom. Imposition

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 Surfaces: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 Create new paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 Creating a new job part (Autom. Imposition) . . . . . . . . . . . . . . . . . . . . . . .87 Chapter 7: Exercise 6 – Creating machine parameters

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 Creating a platesetter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 Creating a sheetfed press: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 Creating a platesetter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 Creating a sheetfed press: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 Chapter 8: Exercise 7 – Creating output parameters and plate templates

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Creating an output parameter set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Creating a plate template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 Creating output parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 Creating a plate template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Positioning marks on the plate template . . . . . . . . . . . . . . . . . . . . . . . . .115

Print Media Academy – Content

Chapter 9: Exercise 8 – 1up repetition and gang run form

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 Completed Form: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 Creating a customer data set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 Creating a gang run form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Chapter 10: Windows and Inspectors

The Job window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 The Browser Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

The Inspectors Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 The Job Inspector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 The Inspector for Job Parts – impositioning and automatic impositioning152 The Folding Sheet/Assembly Block Inspector . . . . . . . . . . . . . . . . . . . . .154 The Press Sheet Inspector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156 The Page/1up Inspector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 The Document Inspector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

The Graphics Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Graphics Window control elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 The Press Sheet window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161 The Folding Sheet/Assembly Block Window . . . . . . . . . . . . . . . . . . . . . .162 The Page List Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 The Press Sheet List Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164 The Document Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

The Lists Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 The Press Sheet List Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 The Folding Sheet List Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 The Page List List Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 The Assigned List Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 The Not Assigned List Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

III

IV

Content – Print Media Academy

Chapter 11: Exercise 9 – 1up Repetition Front/Back

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169 Color control bar example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 Surfaces: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 Creating color control bars and composite marks . . . . . . . . . . . . . . . . . .171 Creating a composite mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176 1up front/back repetition exercise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

Chapter 12: Exercise 10 – Different press sheets in one job part

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193 Surfaces: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195 Creating a new scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195 Imposing different sheet sizes in one job part . . . . . . . . . . . . . . . . . . . . .204

Chapter 13: Exercise 11 – Special master pages and layers

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215 Surfaces: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216 Sheet-PDF in Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Sheet-PDF in englisch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Preliminary considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219 Creating a new Signa job with layers and special master pages . . . . . .219 Assigning PDF documents to different layers . . . . . . . . . . . . . . . . . . . . .226

Chapter 14: Exercise 12 – Combination sheet

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231 Product part: Combination sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231 Completed forms: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233 Product part: Combination sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233

Print Media Academy – Content

Chapter 15: Exercise 13 – Combination sheets (different schemes and jobs)

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243 I. Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243 II. Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243 Job part 1: Montage – press sheet 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .244 Job part 2: Imposition – inner pages / maxi drawing book . . . . . . . . . . .245 Job part 3: Imposition – inner pages / mini drawing book . . . . . . . . . . . .246 Complete forms: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248 Job part 1: Montage – press sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248 Job part 2: Imposition – inner pages / maxi drawing book . . . . . . . . . . .251 Job part 3: Imposition – inner pages / mini drawing book . . . . . . . . . . . .254 Positioning job parts 2 and 3 on Press_Sheet1 . . . . . . . . . . . . . . . . . . .259 Position Job Part 3 (Mini drawing book) on Press Sheet 1 . . . . . . . . . . .261 Positioning job part 2 (folding sheet 2 of maxi drawing book) on Press_Sheet2264 Assigning pages to the individual folding schemes . . . . . . . . . . . . . . . . .265

Chapter 16: Exercise 14 – Different press sheets in one job part

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267 Surfaces: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268 Completed Form: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .269

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270 Create new scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270 Imposing different sheet sizes in one job part . . . . . . . . . . . . . . . . . . . . .274 Unproportionally scaling marks and clipping color control bars . . . . . . .282 Loading default formats for the trimbox . . . . . . . . . . . . . . . . . . . . . . . . . .285 Assigning pages and inserting blank pages . . . . . . . . . . . . . . . . . . . . . .287 Duplicating pages in the imposition mode . . . . . . . . . . . . . . . . . . . . . . . .291

Chapter 17: Exercise 15 – Creating and applying a plate layout template

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .297 Completed forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298

Exercise description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299 Creating a plate layout parameter set . . . . . . . . . . . . . . . . . . . . . . . . . . .299 Creating a Signa job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302

V

VI

Content – Print Media Academy

Chapter 18: Exercise 16 – SM74DI

Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309 Feasible order for creating machines and resources . . . . . . . . . . . . . . .309 I. Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309 II. Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309

Appendix

Data sheet: Platesetters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311

Data Sheet: Sheetfed Presses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312

Data Sheet: Papers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312

Plate template element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .313

Feasible order for creating machines and resources . . . . . . . . . . . . . . . . . . .314 I. Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .314 II. Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .314 Machines/resources and Signa job dependencies . . . . . . . . . . . . . . . . . . . . .315

Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316 Preferences – General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316 Preferences – Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318 Preferences – Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320 Preferences – Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322 Preferences – Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323 Preferences – Import . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .325 Preferences – Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326 Prinect Signa Station Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .328

Prinect Signa Station 3 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329 Prinect Signa Station key shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

Marks handling - hotspot - reference point . . . . . . . . . . . . . . . . . . . . . . . . . . .330

Print Media Academy – Introduction

Introduction Prinect Signa Station is an application allowing the digital imposition or montage of PDF documents or Delta lists. With this application you can create fully imposed signatures containing all marks and print control strips – i.e. all information required for imaging, print, and postprocessing – for output to CtP, CtF and digital printing presses.

The application processes PDF documents and Delta lists only. Although you can select PostScript files to be loaded, the Acrobat Distiller application will automatically convert them to PDF; for this purpose, the Acrobat Distiller must be installed on the workstation. During automatic conversion the PostScript document is directly converted to PDF. No data optimization is performed. To optimize PDF documents prior to processing with Prinect Signa Station you should have converted them to PDF using the desired job options.

A TrimBox present in a PDF document is automatically used for page positioning. You can, however, always move the page information by hand.

Using resources you can define plate templates, folding patterns, etc. to ensure you always apply standardized formats. All workstations have access to the same data records if you store default folders containing resources on a server and specify these in the application.

You can manage and process several product parts within one job, e.g. a 36-page brochure, business cards, flyers, etc., thus allowing all jobs for a specific customer to be processed in one file.

According to standard there are three modes for creating a signature and two further as an option: Imposition:

Automatic imposition:

Montage: Packaging: Sheet Optimizer:

Here, all signatures are defined for a specified number of pages. In this mode you can, for example, process several imposition schemes, paper and plate templates in a single job.

Here, you use a defined template that is multiplied as soon as the last sheet is filled and more pages need to be assembled. This mode does not allow a combination of different imposition schemes.

In this mode only the printing plate and the paper are defined. This allows 1ups or collective forms to be created.

In this mode the printing plate and the paper are defined. It is possible to generate forms based on CFF2-files, so that folding boxes are easy to impose.

Similarly to standard Montage mode the printing plate and the paper are pre-defined. Using all of the possibilities you will have in the end really an optimal utilization of the sheet.

The Prinect Signa Station application heavily draws on context-sensitive operation, i.e. right-clicking the mouse (Windows) or clicking the mouse with the Ctrl key pressed (Macintosh) in a window opens a shortcut menu with currently available commands.

i

1

2

Introduction – Print Media Academy

Compatibility and requirements Requirements for OS:

Windows 2000 Professional or Server, Windows 2003, Windows XP, Windows Vista 32bit;

Mac OS X 10.4.8

Hardware requirements:

P4 with 2.0 Ghz, 2Gig RAM; Apple G5 2,0GHZ, 2Gig RAM Workflow requirements:

Released for workflow with MetaDimension 6.5, Print Ready 3.5 and Delta Technology 8.5.

Starting Signa

The JDFConnector version is also shown.

The splash screen bottomshows the progress and the current actions.

Print Media Academy – Introduction 3

General Information

Versions and options of Prinect Signa Station 3

Prinect Signa 52

max. format Output formats

Prinect Signa 74

max. format Output formats

Prinect Signa 102 max. format Output formats

Prinect Signa JDF-JT max. format Output formats Options:

675 x 675 mm (2000 pt) PDF, PS, JT, JDF

776 x 776 mm (2200 pt) PDF, PS, JT, JDF

4050 x 4050 mm (11500 pt) PDF, PS, JT, JDF

4050 x 4050 mm (11500 pt) JDF, JT

Presetting (comprises all Cip3 color control bars, auto registration)

functions;

trimming,

folding,

Packaging (packaging printing: folded boxes with CFF2 information)

Sheet Optimizer (label optimization)

4

Introduction – Print Media Academy

Valid character set for names in Prinect Affected functions:

Generation of job name (.sdf) with Save or Save as...

Generation of output for all workflows Generation of CIP3 names Valid characters

The following special characters are valid in addition to “normal” letters and figures ! § $ & ( ) = ´ + #- _ . , ? ° " ä ö ü Ä Ö Ü ß and 1 or several spaces between other characters.

Invalid characters

The list of “invalid” characters comprises:

" \ * / : < > | ' ; ^ ` { } ~% as well as spaces at the beginning and the end of a name.

Signa behavior when invalid characters are encountered

the characters

" \ * / : < > | are replaced by: _

the characters

' ; ^ ` { } ~% are used without being replaced.

White spaces at the beginning and the end of a name are removed.

White spaces between valid characters are now preserved.

Print Media Academy – Chapter 1: Menu overview

Chapter 1: Menu overview The upper window area of the Prinect Signa Station application comprises the following menu items: File, Edit, Inspectors, Window, Services, and Help.

File menu

Choose the Open… menu item to load an existing job into the Prinect Signa Station application.

Choose New… to create a new job, supported by the Job Assistant.

Choose Create Resource to create new data sets for Plate Template, Scheme, Marks, Paper Sizes, Page Formats, Customer Data Sets, and Output Parameter Sets.

Choose Create Machine to create new data sets for Filmsetter, Platesetter, Sheetfed Presses, and Web Presses.

5

6

Chapter 1: Menu overview – Print Media Academy

Choose Import to load PDF documents or Delta lists you need for the current montage. Also you can import Resource/Machineparameters, Paper-and Customer-Resources by CSVfile,JDF or Preferences.

Choose the Recent Jobs submenu to view the names of recently opened documents and to directly open them.

Choose Save to save the latest changes to your current job.

Choose Save as… to save your current job under any name. You can also specify where your montage job is to be saved.

Choose Close to close the current Signa job. You will be notified if latest changes have not yet been saved, and you can choose to close and save your document at the same time.

Choose Print Job to print your current job.

Choose Preferences… to open the Preferences dialog where you can also define the Default Unit and Default Directories.

Choose Exit to quit the application.

Edit menu

Choose the Edit menu items to undo or redo recent actions.

Print Media Academy â&#x20AC;&#x201C; Chapter 1: Menu overview 7

Jobs & Resources menu

Use the Jobs & Resources menu to toggle between job and resource view. This menu also lists the jobs currently open. Use this menu to switch between the individual jobs. You can use this this menu to go to the current job (i.e. the job you were editing before changing to the Resources), to an open job shown in the list, to Resources & Machines, to Plate Template Resources, to Scheme Resources or to the Marks Resources.

Inspectors menu

Choose the Inspectors menu to switch to any of the inspectors: Job Inspector, Inspector for Job Parts, Folding Sheet Inspector, Press Sheet Inspector, Page/1up Inspector, and Document Inspector. Each inspector has a symbol of its own that also appears in the applicationâ&#x20AC;&#x2122;s tool bar.

Tools menu

Choose Show Progress to show or hide the Background Processes window. This window indicates any active background processes. Show Print Status opens a window that shows for example which job is active or which job has finished. Status of JDF Connector Jobs show you, which JDF`s are actual activ, which JDF`s are finished or the status of all JDF`s which are in the Signa Station. Folding Sheet Animation is a visualization of standard or user defined folding sheets. Choose Detach/Include Graphic View to detach the Graphic View and make it part of the job window again. The Window menu also lists the currently open jobs. Use this menu to switch between the individual jobs.

Services menu

Help menu

Choose the Services menu to start the Heidelberg Assistant or search the Internet for a program update.

Choose the Help menu to open the Online Help and to view information on the version of the Prinect Signa Station application you are currently using.

8 Chapter 1: Notes â&#x20AC;&#x201C; Print Media Academy

You also view information on the user currently logged on if you select Current Us

Tool bar overview

The buttons in the Toolbar let you exit the Prinect Signa Station application, load a Signa job from the file system, create a new file with the Assistant, save the current file, print the file, switch to the other inspectors, and change the unit used by the program.

1

2 3

4 5

6

7

8

9

10 11

12

1

2

3

4

5

6

7

Load Signa job from file system

8

9 10 11

Create new job with the Assistant Save current Signa job

Send selected job to output device

Toggle between Jobs and Ressources view Start Inspector for selected job Open product part inspector Open press sheet inspector

Open folding sheet inspector Start page/1up inspector

Open document inspector Set unit

12

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 9

Chapter 2: Exercise 1 â&#x20AC;&#x201C; Autom. Imposition Task

The objective of the present exercise is the automatic imposition of a 96-page document to be created for Perfect Binding postprocessing. The job will be created with the Job Assistant. All resources/default settings required for this exercise have already been prepared.

Job data: Job code: Job name Customer: Customer code:

Job part definition: Name: Page total: Working mode: Master pages: Page format:

Binding Methods Binding method: Creeping: Print control elements:

Data for Collating marks: Position: Distance: Range: Direction: Printing plates: Printing plate: Placing mode: Paper definition: Sujetposition on Paper: Folding schemes: Scheme: Top gutters: Inside gutters: Center gutters: PDF document:

Output parameter set:

0001 HD Manual Heidelberger Druckmaschinen AG 0001 Supertrap 96 Autom. Imposition A5 without trim Perfect Binding disabled Cut, fold, and collating marks, folding cross and folding sheet cut Back margin Automatic Automatic Ascending

SM102 from the Training group Sheetwise (front and back) Profisilk_90_100x70 from the Training group AutoPosition Sujet + Center Sujet F32-05_li_4x4 from the Standard group 10 mm 6 mm 20 mm Supertrap.pdf

Supra_SM102 from the Training group

10

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

Surfaces

Sheet 1 front and back

Sheet 2 front and back

Sheet 3 front and back

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 11

Exercise description Creating a new Signa job 1.

Start the Prinect Signa Station application.

3.

The Job Assistant automatically opens.

2.

4.

Choose File > Newâ&#x20AC;Ś

With the Job Assistant you can specify all parameters required for a new Signa job in an easy and clearly structured manner right from the job start.

Specify general job information in the Job Data window.

12

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

5.

Specify job code and job name according to the task.

6.

The customer for this job has already been created in the resources and can be loaded for the present job.

7.

8.

Job code = Job name =

0001 HD Manual

To load the customer data set click From Template

next to the Customer field.

Click the gray triangle in front of the folder icon to view the contents of the Standard group in the Choose Customer window. Highlight Heidelberger Druckmaschinen AG and click OK.

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 13

9.

The fields Customer and Customer Code are automatically completed in the Job Data window.

10. Click Next Card in the bottom window region to go to the next window â&#x20AC;&#x201C; the Job part definition window.

11. Type the job part name and select the Working Mode in the Job part definition window.

14

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

12. Type the job part name in the Name text box and choose the Autom. Imposition as the Working Mode.

Name = Working Mode =

Supertrap Autom. Imposition.

13. Click Next card to go to the Master Pages window.

14. Click

to load the A5 paper format from the resources.

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 15

15. Display the contents of the Standard group in the Choose Page or Paper Size window.

Highlight A5 and click OK.

16. The selected page format appears in the Master Pages window.

Our sample document does not require any trim; you can therefore type 0 in the Trim text box in the Page-related bleed section.

17. Click Next card to go to the Binding Methods window.

16

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

18. Make the following settings in this window:

Binding Method = Perfect Binding Enable Cut Marks, Fold Marks, Collating Marks, Folding Cross, and Folding Sheet Cut Click the gray triangle in front of the Marks colors and collating values and enable the following checkboxes in the Data for Collating Mark section: Position = Back margin Distance = Automatic Range = Automatic Direction = Ascending Deselect Use routing margin in the Parameters for Automatic Gap Computation section.

19. Click Next card to go to the Printing Plates window.

20. In this window you define the plate template and the paper to be used.

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 17

21. Click

next to the first pop-up menu to load the plate template from the resources.

22. Display the contents of the Training group.

Highlight SM102 and click OK to adopt the selected plate template.

18

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

23. The selected plate template now appears in the window along with its stored width and height.

24. Choose the Sheetwise option in the Placing Mode pop-up menu.

25. Click ces.

next to the Name pop-up menu to load the paper definition from the resour-

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 19

26. Display the contents of the Training group.

Highlight Profisilk_90_100x70 and click OK to adopt the selected paper.

27. The paper values stored in the resources are filled in.

28. Click to the AutoPosition Sujet and Center Sujet, to center the Sujet automaticly in the middle of the paper.

29. Click Next card to go to the Folding Schemes window.

20

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

30. In this window you define the folding scheme and top, bottom and inside gutters.

31. Click of the Current Scheme pop-up menu to load the folding scheme from the resources.

32. Display the contents of the Standard group, highlight F32-05_li_4x4 and click OK to adopt the selected scheme.

i

You will be able to choose from those folding schemes only that reasonably fit on the sheet under consideration of the settings made so far (selected trimmed size, plate template, and paper format) when you choose a scheme.

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 21

33. Upon selection of the scheme a thumbnail representation of the press sheet appears in the right window section.

The left bottom window section shows a schematic representation of the selected scheme. You define top, bottom, and inside gutters here. Specify the gutters for this exercise example as per the illustration below. You can immediately watch the changes in the press sheet thumbnail image.

Use the Tab key to go from text box to text box. Use the Shift and Tab keys together to go to the previous text box.

34. Click Ready to create the job with the settings made by help of the Job Assistant.

i

22

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

35. The job window shows the first press sheet in the Graphics window.

The browser window shows a tree view of the current job with the Supertrap job part, the Folding Sheets, the Page List, and the Press Sheets in the Jobs tab. The Internal Marks directory lists the marks used in the present job.

The Inspector window with the Job Inspector provides general information on the current document and the colors used in the document.

The Press Sheets tab in the Lists window shows the press sheets created by now.

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 23

Saving a Signa job 1.

To save the current job choose File > Save asâ&#x20AC;Ś

2.

You automatically go to the directory for saving Signa jobs defined in the Preferences.

Normally the SignaJobs will be save in the directory C:\Document and Settings\All Users\Application Data\Heidelberg\PrinectSignaStation_3\SignaJobs.

SignaStation automatically proposes a file name consisting of the Job Code and Customer name specified in the Job Assistant, the and the Job Name.

The Prinect Signa Station application automatically assigns the .sdf extension.

3.

Click the Save button to save the current job in the selected directory.

24

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

Importing PDF documents and assigning them to the Signa job 1.

The next step is to import the PDF document. There are three ways to do this.

a) Move to the Browser to the tab Contents. Open the explorer of your system and choose the pdf-document in the predefined directory. Click to the pdf-document and by drag and drop import it to the tab Contents.

b) Choose File > Import > Documents.

c) From the Browser window go to the Contents tab. Right-click the PDF Documents to open the shortcut menu and choose Documents ...

To open the shortcut menu, click the right mouse button (Windows) or press the Ctrl key (Macintosh).

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 25

2.

You automatically go to the directory for loading documents defined in the Preferences.

3.

Highlight the Supertrap.pdf file in the list and click Open.

4.

The imported document appears in the Contents tab in the PDF Documents group.5.

The PDF document contains all pages needed for this Signa job. All pages of the PDF document are now to be assigned to the Signa job. There are several ways to do this.

a) From the Browser window go to the Contents tab.

Highlight the Supertrap.pdf document and choose Assign Pages from the shortcut menu.

b) From the Lists window go to the Not assigned tab.

Click the document entry in the list and choose Add pages from the shortcut menu to assign all pages of the document.

To assign individual document pages, show the pages by double-clicking the document in the No. column.

26

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

Now highlight those pages in the list you wish to assign, and choose Assign Pages from the shortcut menu.

c) You can also assign individual pages by dragging and dropping them from the list of not assigned pages into the Lists window or via the Browser window using the Contents tab to the respective page in the Press Sheet, Folding Sheet, Page List, and Press Sheet List graphics windows. To do so, show the desired Graphics windows.

In our example we show the Page List window.

i

To assign all pages of the document drop the document on the first page of the page list.

To assign selected pages, show the pages and drag and drop them on the respective page in the Page List.

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 27

6.

After having assigned all pages, show the Press Sheet window to inspect the current job.

7.

By default only the front signature is shown. Click the icon at the bottom of the press sheet window to also view the back signature. This is a toggle switch allowing to show or hide the current back sheet.

8.

If you selected in the preferences the automatic preview of the pdf-documents, than Prinect Signa Station is calculating the preview of everypage in the background. To get more informations about the status go to the menu Tools > Background Processes ....

9.

Choose File > Save to save the latest changes to the document.

28

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

Printing the Signa job as PDF 1.

The last step is to print the job exercise to a PDF file. To do so choose File > Print Job.

2.

You can show the individual press sheets and surfaces in the Print Inspector to inspect them.

3.

Click

to choose an output parameter set from the resources.

Print Media Academy â&#x20AC;&#x201C; Chapter 2: Autom. Imposition 29

4.

Show the contents of the Training group and highlight Supra_SM102. Click OK to apply the selected resource.

5.

Enable all press sheets in the Press Sheet List of the Print Inspector and click the Print button to start output.

6.

The PDF documents will be automatically saved in the predefined directory.

30

Chapter 2: Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

i

7.

A message will inform you once printing has been successfully completed. Click OK to close the window.

The Information window displays the current storage path.

i

On a Windows PC the default file storage location is the C:\Documents and Settings\All Users\Application Data\Heidelberger\PrinectSignaStation_3\output folder.

On the Macintosh the default file storage location is the volume\Users\Shared\Heidelberger\PrinectSignaStation_3\output folder.

Start

8.

To control the output, you can choose in the menu Tools > Show Output Status. Here you can check which jobs are finished.

9.

Now the job is finish.

Print Media Academy – Chapter 3: Exercise 2 – Format customization

Chapter 3: Exercise 2 – Format Customization Task

The Signa job you created in Exercise 1 must be customized due to short-term rescheduling from SM102 to SM74. This exercise will teach you how to quickly perform format changes with the Job Assistant.

After the format change the modified job is to be saved as a template for the Assistant.

Job data: SignaJob:

Printing plates: Plate: Placing Mode: Paper definition:

Folding schemes: Scheme: Top gutters: Inside gutters: Center gutters:

Output Parameter Set:

0001_HD-Manual.sdf SM74 from the Training group Sheetwise (front and back) Profigloss_90_70x50 from the Training group F16-06_dd_4x2 from the Standard group 20 mm 6 mm 20 mm SupraA74_SM74 from the Training

31

32

Chapter 3: Exercise 2 – Format Customization – Print Media Academy

Surfaces

Press sheet 1: Front/Back printing

Press sheet 2: Front/Back printing

Press sheet 3: Front/Back printing

Print Media Academy – Chapter 3: Exercise 2 – Format customization

Press sheet 4: Front/Back printing

Press sheet 5: Front/Back printing

Press sheet 6: Front/Back printing

33

34

Chapter 3: Exercise 2 – Format Customization – Print Media Academy

Exercise description

Changing the format 1.

Choose File > Open…

2.

Highlight the 0001_HD-Manual.sdf document (from exercise 1) in the SignaJobs directory and click Open.

3.

From the Browser window go to the Jobs tab.

5.

The Job Assistant automatically opens.

4.

6.

Highlight the Supertrap job part and choose Edit Job Part from the shortcut menu.

Go to the Printing Plates window.

Print Media Academy â&#x20AC;&#x201C; Chapter 3: Exercise 2 â&#x20AC;&#x201C; Format customization

7.

The Printing Plates window shows the current plate template and the current paper when you select position 1 in the List of Selected Plates.

8.

Delete the old plate template by clicking the trash can icon and then choose the new plate template and the new paper format in the resources.

Plate Template: Paper:

9.

SM74 from the Training group Profigloss_90_70x50 from the Training group

Go to the Folding Schemes window.

35

36

Chapter 3: Exercise 2 â&#x20AC;&#x201C; Format Customization â&#x20AC;&#x201C; Print Media Academy

10. To delete the old folding scheme, select the scheme in the list and click the trash can icon. Select the new folding scheme from the resources.

Current scheme:

F16-06_dd_4x2 from the Standard group.

11. Specify the gutters as per the illustration below.

12. Click Ready to apply the changes to the Signa job.

Print Media Academy â&#x20AC;&#x201C; Chapter 3: Exercise 2 â&#x20AC;&#x201C; Format customization

13. You can assess the format change result in the job window.

14. Choose File > Save as... and save the changed document as 0001_HD-Manual_SM74.

15. Print all press sheets as PDF. Choose the SupraA74_SM74 output parameter set from the Training group in the Print Inspector.

37

38

Chapter 3: Exercise 2 â&#x20AC;&#x201C; Format Customization â&#x20AC;&#x201C; Print Media Academy

Saving a Signa job as template for the Assistant

Prinect Signa Station lets you save a complete product part as template for the Assistant to set up the Assistant even more directly.

A product part template contains all parameters of a job or job part, except for the job data and the assigned pages.

1.

To create a group in the Job Templates in the resource folder, select Jobs & Resources > Resources & Machines in the menu.

2.

From the Browser window go to the Resources tab.

3.

Enable the Product Part Templates option and choose New Group from the shortcut menu.

4.

Type your own name as the group name.

Print Media Academy – Chapter 3: Exercise 2 – Format customization

5.

To save a product part as a template, go to the currently open Signa job using Jobs & Resources > job name in the menu or Current Job.

6.

Highlight the product part in the list and choose Save Product Part as Default for the Assistant… from the shortcut menu.

7.

Choose the group you have created beforehand and type a name for the template in the Group pop-up menu of the Save Product Part as Template window. Then click OK.

39

40

Chapter 3: Exercise 2 â&#x20AC;&#x201C; Format Customization â&#x20AC;&#x201C; Print Media Academy

8.

Our my name folder with the HD Manuals template is located in Resources -> Product Part Templates.The template for the Assistant is automatically locked and tagged with a green asterisk.

9.

There is a new Template for the Assistant text box in Preferences -> Resources. It indicates the template currently assigned. The folder icon lets you assign another template.

Click the trashcan to remove the template for the Assistant. The template is still available in the Resources.

The template is generally applied to all future new jobs. You cannot disable it for a specific job. Disabling the template will disable it for all subsequent jobs.

Print Media Academy â&#x20AC;&#x201C; Chapter 3: Exercise 2 â&#x20AC;&#x201C; Format customization

10. You can disable the template for the Assistant in the Resources with the Reset as Default for the Assistant item from the shortcut menu.

Choosing another template as default for the Assistant will automatically disable the previous template. Only one product part template can be active at a time. It should match the jobs as universally as possible. The Assistant has so-called Mss fields (e.g. number of pages). You can remove them in the Product Part Inspector after you have created the job.

The template will overwrite all default preferences.

The template (JDF) overwrites the settings when you work in the JDF workflow (Prinance-Printready-Signa).

41

42

Chapter 3: Exercise 2 – Format Customization – Print Media Academy

Creating a new Signa job with a template for the Assistant 1.

To create a new Signa job using the default template, choose File > New….

2.

The Assistant has now been completed with the data of the Product Part Template. You need only complete the Job Data tab. You can make changes to the Assistant at any time when you must make job-specific settings.

3.

To load another product part template, go to the Product Part Definition window. Click the Product Part from Template folder icon in the Product Part Definition window.

4.

Go through all Assistant steps and check the parameters. Click Ready to create the Signa job.

Print Media Academy â&#x20AC;&#x201C; Chapter 3: Exercise 2 â&#x20AC;&#x201C; Format customization

5.

Highlight the product part in the list and choose 3D Collating Mark Visualization from the shortcut menu.

6.

Click the folder icon in the Collating Mark Visualization window and rotate the book block so that you can check the collating marks.

43

44 Notes â&#x20AC;&#x201C; Print Media Academy

Print Media Academy – Chapter 4: Exercise 3 – Plate Templates and Marks

Chapter 4: Exercise 3 – Plate templates and marks Task

The objective of the present exercise is to extend or edit an already existing plate template.

In a first step we will add a a user-defined text mark to the SM74 plate template of the Training group.

In a second step we will replace the color control bar on the plate template with a composite mark consisting of the FOGRA_4, FOGRA_5 and FOGRA_6 color control bars that must first be imported into the Prinect SignaStation application.

To finish this exercise we will save assign the edited plate template a new name.

Job data: Signa job:

Marks: Color control bar:

0001_HD-Manual_SM74.sdf FOGRA_4_F74_740x10.main, FOGRA_5_F74_740x10.main and FOGRA_6_F74_740x10.main from the Signa_Training\Marks\Colorbar\SM74\ FOGRA_4_F74_740x10, Signa_Training\Marks\Colorbar\SM74\ FOGRA_5_F74_740x10 and Signa_Training\Marks\Colorbar\SM74\ FOGRA_6_F74_740x10

45

46

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

Surfaces:

Edited plate template

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

Exercise description

Creating marks using the Marks Editor

Using the Marks Editor you can create simple graphics elements and save them as marks.

As a first step you will create a new Text mark containing a graphic element as well as several text variables.

1.

Select Jobs & Resources > Marks to go to the Marks Resources.

2.

Click the gray arrow to show the contents of the Marks group.

3.

You must first create a new group. To do so click the Marks item and choose New Group from the shortcut menu.

4.

The directory for the new group is created in the directory tree. Type your own name as the group name.

5.

To create a mark using the Marks Editor highlight your group and choose New Mark > Marks Editor from the shortcut menu.

47

48

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

6.

The Marks Editor opens.

1 Activate/deactivate object 2 Move object 3 Ellipse

4 Line tool 15

16

1

2

3

4

5 6 7 8 9

10 11

12 13 14

17

5 Rectangle

6 Fill color black 7 Fill color white 8 Text object

9 Delete object

10 Copy object

11 Center object

12 Fit canvas to bounding box

13 Move object forward one layer

14 Zoom tool (press Alt key to unzoom) 15 Select object list

16 Properties dialog 17 Undo/Redo

7.

Type My Text Mark in the Mark Name text box.

9.

Choose the Lower left option as reference point in the Hotspot pop-up menu.

8.

Choose the Undefined option in the Mark Type pop-up menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

10. To edit the Canvas size click the Properties button. Specify the following values for the canvas size and click OK when you are done.

Width: Height: Grid:

150 10 10

The canvas size defines width and height of the mark to be positioned.

49

50

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

11. Choose the Rectangle tool and draw a rectangle. Then click Properties button (16).

The Properties dialog text boxes indicate the values of the highlighted object.

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

12. Edit the values in the Properties dialog to match the following values: Starting Point x: Starting Point y: Width: Height: filled: Ink Coverage:

0.0 2.5 5 5 enable 100%

13. We will now add a text mark containing the current file name, the date, the time, the color separation name, the sheet number, the surface, and the layer name.

14. Choose the Text tool from the tool bar and click the canvas.

15. The information mentioned before applies to text variables you can select in the Properties dialog. Click Properties button.

51

52

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

16. The Text Properties dialog opens.

17. Edit the Starting Point, the Font parameters and the Fill color of the text mark to match the following values: X: Y:

Font Size: Ink Coverage: Grain Direction:

8 4 Font Type: 12 100 Horizontal

Courier Bold

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

18. To insert the variables for file name, date, time, color separation name, sheet number, and surface click the Job Code, Job Name, Output Date, Output Time, Front and Back / Top and Bottom, Sheet Number and Color buttons. The variables appear in the Text box.

19. To insert the text variable for the layer name, choose the Layer name option next to the Insert placeholder option in the pop-up menu.

20. Click Insert placeholder to insert the selected variable in the text box.

53

54

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

21. The placeholder is inserted in the text box.

22. Click OK to close the window and to apply the changes.

23. You return to the Marks Editor window. To save the mark, click Save and then the Close button.

i

All information will be printed on the sheet even if the text mark text does not appear in its entirety in the Marks Editor.

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

24. The mark you have created appears in your Marks group folder.

Import color control bars

You can always import your own marks into the program. Supported formats are PostScript, EPS, and PDF. When importing marks, the Acrobat Distiller application automatically converts PostScript and EPS files to PDF, which are then loaded into the program.

1.

The the following step we will import the FOGRA_4_F74_740x10, FOGRA_5_F74_740x10 and FOGRA_6_F74_740x10 DIPCO marks available as files from the Signa_Training\Marken\Farbkontrollstreifen\SM74 folder.

2.

Select Jobs & Resources > Marks in the menu to go to the Marks Resources window.

3.

Click the gray arrow to show the contents of the Marks group.

4.

To import a mark click your marks group and choose New Mark > Marks Import from the shortcut menu.

55

56

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

You can also choose File > Create Resource > New Mark > Marks Import in the menu to import a mark.

In this case a window appears where you must first choose the desired Resource Group as the target for the mark import.

5.

The Marks Import Editor opens.

7.

Go to the Signa_Training\Marks\Colorbar\SM74\FOGRA_4_F74_740x10 folder.

6.

Click Source... button.

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

8.

Select the FOGRA_4_F74_740x10.main file and click Open.

9.

As this is an EPS file the Acrobat Distiller application automatically opens and converts it to PDF.

10. After successful conversion the mark appears in the Marks Editor.

The original PDF file name is automatically chosen as mark name. You can edit this name as desired.

11. Assign the mark the Color Control Mark (with AutoClip to sujet) option using the Marks Type pop-up menu.

12. Choose the Lower middle option as reference point in the Hotspot pop-up menu.

57

58

Chapter 4: Exercise 3 – Plate Template and Marks – Print Media Academy

13. Click the Save and then the Close button to save the imported mark. The mark you have imported appears in your Marks group directory.

14. Repeat steps 4 through 13 each to import the FOGRA_5_F74_740x10.main and FOGRA_6_F74_740x10.main marks from their respective folders.

15. After successful marks import, all three marks appear in their marks folder.

i

Since the Dipco marks were specially prepared, selecting the .main file automatically loads any information that is vital for processing – namely subsequent output – composite PDF files as well as preseparated PDF documents.

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

Creating a composite mark

In the next step you will create a composite mark from the three color control bars you have imported.

The benefit of composite marks over other color control bars is the fact that you only need one file for creating 4-, 5- or 6-color jobs. To save time and to eliminate a potential error source, Prinect SignaStation will automatically choose the correct mark for output. The procedure will be explained on the basis of a composite mark for SM74. Of course, autoregister composite marks can be created in this way as well.

1.

2.

3.

Highlight the FOGRA_4_F74_740x10 mark in your marks folder and choose Edit Mark from the shortcut menu.

The Marks Import Editor opens.

Rename the mark to FOGRA_SM74_Composite Mark.

59

60

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

4.

To add the FOGRA_5_F74_740x10 color mark, click the black triangle in front of the Composite Mark option and then click the folder icon to load the next mark from the marks resources.

5.

Select the FOGRA_5_F74_740x10 mark from your marks folder and click OK.

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

6.

The added mark appears in the Composite Mark list of the Marks Import Editor.

7.

Click the folder icon again and add the FOGRA_6_F74_740x10 mark from your marks folder to the composite mark.

8.

To save the composite mark, click the Save and then the Close button.

61

62

Chapter 4: Exercise 3 – Plate Template and Marks – Print Media Academy

9.

The composite mark appears in your marks folder.

Editing and saving plate templates

In this exercise step, we will edit an existing plate template – SM74 in the Training group – and save it under a new name.

The color control bar on the plate template is to be replaced with the FOGRA color control mark we have imported, and our Text Mark is to be positioned on the plate template.

1.

Choose Jobs & Resources > 0001_HD-Manual_SM74 in the menu to go to the current job.

2.

Select the Press Sheet Inspector.

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

3.

The Color Control Bar Editor opens.

4.

To delete the old color control bar go to the Marks tab.

5.

6.

Highlight the Colorbar-4C mark in the Marks List or click the positioned mark directly on the press sheet.

To replace the mark with the newly imported mark, click the arrow icon.

63

64

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

7.

Highlight the mark named FOGRA_SM74_Kombimarke in its marks folder and conform your selection with OK.

8.

The following dialog asks you if the existing mark is to be replaced with the newly selected mark. Confirm with Yes.

9.

The color control bar replaces the old control bar and its width automatically adapts to the subject width.

10. Highlight the color control bar in the list and move it downward by 10 mm. To do so, specify a value of 5 mm in the Position Y: text box.

Print Media Academy – Chapter 4: Exercise 3 – Plate Templates and Marks

11. Go to the Marks Resources tab.

Then drag the Text Mark from the marks folder and drop it on the lower left paper hotspot.

12. Now that you have placed the text mark on the press sheet you can define the mark’s position in relation to the reference point.

13. Go to the Marks tab.

14. All marks positioned on the press sheet appear in the Marks List. Highlighting a mark in the list automatically selects the mark in question in the preview window. Selecting a mark in the preview window automatically highlights the mark in question in the Marks List.

65

66

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

i

15. To better assess the result, you can scale the view by either selecting the desired zoom factor in the Zoom popup menu or by clicking the Loupe tool in the toolbar (the toolbar is located at the window bottom) and clicking the area you wish to magnify.

16. To return to the complete Preview choose the Auto option from the Zoom pop-up menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Templates and Marks

17. Now highlight the text mark in the list. Move the mark to the following coordinates: Position X:

20 mm

18. Click Copy all marks on the front to the back of the current object to copy all marks to the back sheet as well.

19. To save the plate template under a new name go to the Press Sheet List in the graphic window.

67

68

Chapter 4: Exercise 3 â&#x20AC;&#x201C; Plate Template and Marks â&#x20AC;&#x201C; Print Media Academy

20. Select the press sheet you have edited and choose Create Plate Template from Press Sheet in the shortcut menu.

20. A window opens where you first select the desired Resource group. Type your own name for the group where you want to save the plate template.

23. The new plate template is located in your group folder.

Print Media Academy – Chapter 5: Exercise 4 – Imposition

Chapter 5: Exercise 4 – Imposition Task

The objective of the present exercise is to impose a 4-page cover in front and back printing using a 4-page scheme created in the Imposition mode. All resources/default settings required for this exercise have already been created.

Job data:

Job number: Job name Customer: Customer Code: Target Date:

Job part definition: Name: Working Mode: First Press Sheet: First Folding Sheet: First Page: Page total: Page names: Master pages: Page format:

Binding Methods Binding methods: Creeping: Print control elements:

Printing plates: Plate: Placing Mode: Paper definition: Sujet position on paper: Folding schemes: Scheme:

PDF document:

Output parameter set:

0002 HD flyer Heidelberger Druckmaschinen AG 00001 current date Cover Imposition 1 1 1 4 U1-U4 A4 with 3 mm trim Saddlestitch disabled Cut and fold marks SM52 from the Training group Sheetwise (front and back) Zander_135_50x35 from the Training group AutoPosition Sujet F04-01_up_2x1 from the Standard group

HD_Stadt_dt_engl.pdf

Supra_SM52 from the Training group

69

70

Chapter 5: Exercise 4 – Imposition – Print Media Academy

Surfaces:

Cover: Front

Cover: Back

Print Media Academy – Chapter 5: Exercise 4 – Imposition

Exercise description

Creating a new Signa job in the Imposition mode 1.

To create a new job using the Job Assistant choose File > New…

3.

The Job Assistant automatically opens once you choose the New… menu item.

4.

Enter the Job Code and the Job Name according to the task in the Job Data window.

5.

Load the customer data set of the Heidelberger Druckmaschinen AG customer from the Resources. Type the current date as the target date.

6.

Job code = Job name =

0002 HD flyer

Click Next card to go to the Job Part Definition window. In the present job part only the flyer cover is to be imposed. Paper and printing press for the cover differ from the paper and the printing press used for the inner pages. Type the Cover designation in the Name text box.

71

72

Chapter 5: Exercise 4 â&#x20AC;&#x201C; Imposition â&#x20AC;&#x201C; Print Media Academy

Choose the Imposition option as the Working mode.

Type 4 pages in the Page Total text box and confirm your entry by pressing the Tab key.

8.

to facilitate the page assignment at a later stage, we will now be editing the page names/page index for the pages.

Print Media Academy – Chapter 5: Exercise 4 – Imposition

9.

To do so, highlight the four pages in the Page Names List and choose Change Page Names… from the shortcut menu.

10. Type C for cover in the New Name text box and click Apply.

11. The new index appears in the Page Name list.

12. Click Next Card to go to the Master Page window.

73

74

Chapter 5: Exercise 4 â&#x20AC;&#x201C; Imposition â&#x20AC;&#x201C; Print Media Academy

13. Choose the A4 page size from the resources and type 3 mm in the Trim text box.

14. Click Next card to go to the Binding Methods window.

15. Choose the Saddlestitch option in the Binding Method pop-up menu.

Enable the Cut Marks and Folding Mark options in the Automatic Placement of Print Control Elements section.

16. Click Next card to go to the Printing Plates window.

17. Choose the SM52 plate template from the Training group.

18. Choose the Turn (Front and Back Sheet) option in the Placing Mode pop-up menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 5: Exercise 4 â&#x20AC;&#x201C; Imposition

19. Load the paper named Zander_135_50x35 from the Training resource group.

20. Click Next card to go to the Folding Schemes window.

21. Load the F04-01_up_2x1 scheme from the standard scheme resources.

75

76

Chapter 5: Exercise 4 – Imposition – Print Media Academy

22. The application determines the settings for the gaps from the master page settings in the Job Assistant, i.e. the trim of 3 mm is imported. According to the Placement Mode, the sujet is placed at the bottom towards the gripper since the AutoPosition Sujet option was chosen in the Printing Plates window.

23. Click Ready to create the job with the settings made with the Job Assistant.

24. To save the current job choose File > Save as… and save the Signa job with the suggested name in the SignaJobs directory.

25. Choose File > Import > Documents … in the menu to load the PDF document.

26. You automatically go to the directory for loading documents defined in the Preferences.

Print Media Academy â&#x20AC;&#x201C; Chapter 5: Exercise 4 â&#x20AC;&#x201C; Imposition

27. Highlight the HD_Stadt_dt_engl.pdf file in the list and click Open.

28. The imported document appears in the Contents tab in the PDF Documents group.

29. The PDF document contains all pages required for the cover and the inner pages (Exercise 5). In a next step we will assign the current press sheet the cover pages (pages 1 and 2, pages 35 and 36). There are several ways to do this. a) From the Browser window go to the Contents tab.

Click the gray arrow preceding the file name to show the individual pages of the HD_Stadt_dt_engl. pdf document.

Highlight pages 1 and 2.

Now choose Assign Pages from the shortcut menu.

The first two pages are now being loaded to pages 1 and 2 of the press sheet.

Use the scroll bar to go to the document end.

Highlight pages 35 and 36.

Now choose Assign Pages from the shortcut menu.

The last two pages are now being loaded to pages 3 and 4 of the press sheet.

77

78

Chapter 5: Exercise 4 â&#x20AC;&#x201C; Imposition â&#x20AC;&#x201C; Print Media Academy

b) From the Lists window go to the Not assigned tab.

Show the individual document pages by double-clicking the document in the No. column.

Highlight pages 1 and 2 of the document and choose Add Pages from the shortcut menu.

The first two pages are now being loaded to pages 1 and 2 of the press sheet.

Use the scroll bar to go to the document end.

Highlight pages 35 and 36.

Now choose Assign Pages from the shortcut menu.

The last two pages are now being loaded to pages 3 and 4 of the press sheet.

c) You can also assign individual pages by dragging and dropping them in the Browser window using the Contents tab to the respective page in the Press Sheet, Folding Sheet, Page List, and Press Sheet List graphics windows.

To do so, show the desired Graphics window. In our example we will show the Page List window and assign the pages the pages from the Contents browser window.

You can thus easily assign pages under visual control and replace them in case corrections were made.

Print Media Academy â&#x20AC;&#x201C; Chapter 5: Exercise 4 â&#x20AC;&#x201C; Imposition

30. After having assigned all pages, go to the Press Sheet window to inspect the current job.

31. Click the icon

at the bottom of the press sheet window to view the back signature.

32. Choose File > Save to save the latest changes to the document.

33. The last step is to print the job exercise to a PDF file. To do so choose File > Print Job. 34. Choose the Supra_SM52 output parameter set from the Training group in the Print Inspector.

35. Highlight Press Sheet 1 in the Press Sheet List of the Print Inspector and click Save to start output.

79

80

Chapter 5: Exercise 4 â&#x20AC;&#x201C; Imposition â&#x20AC;&#x201C; Print Media Academy

36. You automatically go to the directory for saving documents defined in the Preferences.

37. Click Save to start output.

38. You will be notified if your output was successful. Click OK to close the message window. This dialog indicates the output folder.

To hide the window for subsequent print jobs, enable the Do not show this window again option.

39. Open the PDF file from the C:\Documents and Settings\All Users\Application Data\Heidelberger\PrinectSignaStation_3\output (Windows) or Start volume\Users\Shared\Heidelberger\PrinectSignaStation_3\output (Macintosh) folder in Adobe Acrobat.

Print Media Academy – Chapter 6: Exercise 5 – Job Part/Autom. Imposition

Chapter 6: Exercise 5 – Job Part/Autom. Imposition Task

In this exercise we will add the inner 32 pages to the result of Exercise 1. For this purpose, we will create the inner pages as a job part in the automatic imposition mode. A 3D visualization lets you check the completed folding sheet. The reader’s spread is also checked in 3D.

As the inner pages are to be printed on another paper type than the cover, a new paper format must first be created in the resources.

Inner pages paper definition Name: Profisilk_90_70x50 2 Grammage [g/m ]: 90 Volume: [cm3/g]: 1 Thickness: 0.08 Grade: matt Width: 700 mm Height: 500 mm Data sheet: Papers Paper Name

Paper weight

Volume

Thickness 0.07 mm

matt art printing

Profisilk

90 g/m2

1

0.08 mm

matt art printing

Profisilk

115 g/m2

1

0.1 mm

matt art printing

Profisilk

135 g/m2

1

0.11 mm

matt art printing

Profisilk

170 g/m2

1

0.15 mm

matt art printing

Zanders

135 g/m2

1

0.11 mm

glossy art printing

Zanders

170 g/m2

1

0.15 mm

glossy art printing

Zanders

250 g/m2

1

0.22 mm

glossy art printing

Creato postcard cardboard

200 g/m2

1

0.18 mm

matt coated

Profigloss

90 g/m2

1

0.07 mm

glossy art printing

Profigloss

115 g/m2

1

0.08 mm

glossy art printing

Profisilk

80 g/m2

1

Grade

81

82

Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

Product part definition: Name: Working Mode: First Press Sheet: First Folding Sheet: First Page:

Master pages: Page format:

Binding Methods Binding methods: Creeping: Print control elements:

Printing plates: Plate: Placing Mode: Paper definition: Sujet position on paper: Folding schemes: Scheme: Top gutter distance: PDF document:

Inner pages Autom. Imposition 2 2 3 A4 with 3 mm trim Saddlestitch disabled Cut and fold marks SM74_composite mark from your own group Sheetwise (front and back) Profisilk_90_70x50 from generic group AutoPosition Sujet, Center Sujet F08-07_li_2x2 from the Standard group 20 mm HD_Stadt_dt_engl.pdf

Print Media Academy – Chapter 6: Exercise 5 – Job Part/Autom. Imposition

Surfaces:

Press sheet 2:

Press sheet 3:

83

84

Chapter 6: Exercise 5 – Job Part/Autom. Imposition – Print Media Academy

Press sheet 4:

Press sheet 5:

Print Media Academy â&#x20AC;&#x201C; Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition

Exercise description Create new paper

In a first step we will create a new paper format.

1.

Select Jobs & Resources > Resources & Machines in the menu to go to the Resources & Machines window to create a new paper.

2.

Go to the Resources tab.

3.

Click the gray arrow to show the contents of the Papers group.

4.

Create a new group. To do so click the Papers item and choose New Group from the shortcut menu.

5.

The directory for the new group is created in the directory tree. Type your own name as the group name.

6.

To create a paper click the group you just created and choose New paper from the shortcut menu.

85

86

Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

7.

The Paper Editor opens.

8.

Type the Profisilk_90_70x50 designation in the Name text box.

9.

Type the following values for this exercise in the Paper Editor.

Order number: Mark name: Grammage [g/m2]: Volume: [cm3/g]: Thickness: ISO surface: Width: Height:

100200 Profisilk 90 Value is automatically calculated 0.08 type 2 matt-coated 700 mm 500 mm

10. To create the paper, click Save and then the Close button.

Print Media Academy – Chapter 6: Exercise 5 – Job Part/Autom. Imposition

11. The paper you have created appears in your group folder.

Creating a new job part (Autom. Imposition) 1.

Open the Signa job you created in the last exercise by choosing File > Open…

2.

A new job part is to be added to the inner pages.

4.

Click the Job entry in the list and open the shortcut menu.

3.

Go to the Product Part tab in the Browser window.

5.

Now choose New Product Part from the shortcut menu.

6.

The Job Assistant opens without the Job Data window because we are dealing with a job part. You already defined the job data for the cover.

7.

8.

Type the Inner pages designation in the Name text box of the Job Part Definition window.

Choose the Autom. Imposition option as the Working mode.

87

88

Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

9.

Type the following values in the text boxes of the Start Conditions area: First Press Sheet: 2 First Folding Sheet: 2 First Page: 3

10. Click Next card to go to the Master Pages window.

11. Like with the cover you do not need to edit any of the values in this window because the inner pages were also set up in the A4 format with a 3 mm trim.

12. Click Next card to go to the Binding Methods window.

13. Choose the Saddlestitch option in the Binding Method pop-up menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition

14. Enable the Cut Marks, Folding Mark and Folding Cross options in the Automatic Placement of Print Control Elements section.

15. Click Next card to go to the Printing Plates window.

16. Choose the SM74_Kombimarke data set from the Training group in the Plate Template resource directory and confirm your selection by clicking OK.

17. Choose the Turn (Front and Back Sheet) option in the Placing Mode pop-up menu.

89

90

Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

18. To define the Paper Format choose the paper you have created from the Papers resource folder of your group folder and confirm your selection by clicking OK.

19. To center the folding sheet on the defined paper format, you must make sure to enable the AutoPosition Sujet and Center Sujet in the Sujet Position on Paper area.

20. The settings in the Printing Plates window should now match the screenshot below.

21. Click Next card to go to the Folding Schemes window.

Print Media Academy â&#x20AC;&#x201C; Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition

22. Choose the F08-07_li_2x2 scheme from the Standard group in the Schemes directory as the current scheme and confirm your selection by clicking OK.

23. Specify a head gap of 20 mm in the schematic view.

24. Click Ready to create the job part once you have finished making settings in the Job Assistant.

25. Go to the Product Parts tab in the Browser window and highlight the Inner pages product part in the Job List if the job window does not show the current product part.

91

92

Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition â&#x20AC;&#x201C; Print Media Academy

26. Open the following dialogs: Browser = Jobs, Inspector = Job Part Inspector, Graphics = Press Sheet and Lists = Press Sheets. Your screen should now look like this:

27. To save the changes choose File > Save.

28. The current Inner pages job part comprises a folding and a press sheet at present. The folding and press sheets required for the job will be automatically generated when you add the remaining pages. Once a sheet is completely filled with pages in the Autom.

Imposition mode a new identical sheet is generated as soon as new pages are added.

29. To load pages into the sheet go to the Contents tab in the Browser window.

30. Click the gray arrow preceding the file name to show the individual pages of the HD_Stadt_dt_engl.pdf document.

31. Double-click the caption to maximize the Browser window.

Print Media Academy â&#x20AC;&#x201C; Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition

32. Now highlight pages 3 through 34 and choose Assign Pages from the shortcut menu.

33. Go to the Lists window in the Folding Sheets or Press Sheets tab to see how many sheets have been created.

93

94

Chapter 6: Exercise 5 – Job Part/Autom. Imposition – Print Media Academy

34. Highlighting a folding or press sheet in the list causes it to be immediately shown in the graphics window.

35. To save the latest changes choose File > Save.

36. Go to the first press sheet and print a reduced copy of the front press sheet on the LaserWriter in your seminar room.

37. Go to the Press Sheets tab in the Graphics window and choose Graphic > Print….

Print Media Academy â&#x20AC;&#x201C; Chapter 6: Exercise 5 â&#x20AC;&#x201C; Job Part/Autom. Imposition

Folding sheet animation

Prinect Signa Station lets you show an animation of the folding rule. This lets you check default schemes but also custom schemes.

1.

To do so, go to the Folding Sheet/Assembly Block tab in the graphic window. Right click in the window and choose Open Folding Sheet Animation from the shortcut menu.

2.

A new window opens. Here you can, for example, rotate the folding sheet. Folding now occurs with animation or manually with the slider at the window bottom.

Use the black arrow to the right to also display the respective folding sheet.

95

96

Chapter 6: Exercise 5 – Job Part/Autom. Imposition – Print Media Academy

Print Media Academy – Chapter 7: Exercise 6 – Creating machine parameters

Chapter 7: Exercise 6 – Creating machine parameters Task

In this exercise we will create new machine parameters for a platesetter and a press.

Create a new group for each of the new data sets. Type your own name for each of the group names.

Creating a platesetter Name: IPR/Query File:

Data sheet: Platesetters

Suprasetter105 Supra105_1.ipr

Imagesetter

Press

Plate size

Imaging Window

Suprasetter105

XL105

1055 x 811

1055 x 811

Suprasetter105

SM102 / CD102

1030 x 790

1030 x 790

Suprasetter105

CD74

745 x 660

745 x 660

Suprasetter105

SM74

745 x 605

745 x 605

Suprasetter105

SM52

525 x 459

525 x 459

Suprasetter74

CD74

745 x 660

745 x 660

Suprasetter74

SM74

745 x 605

745 x 605

Suprasetter74

SM52

525 x 459

525 x 459

Suprasetter52

SM52

525 x 459

525 x 459

97

98

Chapter 7: Exercise 6 – Creating machine parameters –Print Media Academy

Creating a sheetfed press:

Name: Number of ink zones: Windth of ink zone: Plate format – width: Plate size – length: Printable Area – lead edge of print: Printable Area – tail edge of print: Print Margin: Gripper: Perfecting:

XL105_6 32 32,5 1055 811 53,0 18 2,5 10 disable

Data sheet: Sheetfed press Press

Plate

GTO46

450 x 370

35

8 - 10

460 x 330

445 x 310

GTO52

510 x 400

34

8 - 10

520 x 360

SM52

525 x 459

58

8 - 10

MO

650 x 550

48

SM74

745 x 605

CD74

745 x 660

SM/CD102 43 x 37 SM102 52 x 28

1030 x 790 1030 x 790

Leadin Grippe Max. g edge r paper of print format

Max. printing format

Numb er of Ink zones

Width of ink zones

Tail edge of print

Lat. distance

25

2.5

505 x 340

16

32.5

26

2.5

520 x 370

520 x 360

16

32.5

41

2.5

8 - 10

650 x 480

645 x 472

23

32.5

30

2.5

59,5

8 - 10

740 x 530

740 x 512

23

32.5

33,5

2.5

43

8 - 10

740 x 610

740 x 585

23

32.5

32

2.5

43

10 - 12

1020 x 720 1020 x 710

32

32.5

37

5

52

10 - 12

1020 x 720 1020 x 710

32

32.5

28

5

16

32.5

Print Media Academy â&#x20AC;&#x201C; Chapter 7: Exercise 6 â&#x20AC;&#x201C; Creating machine parameters 99

Exercise description

Creating a platesetter

Go to the Filmsetter and Platesetter resources to define properties such as Imagesetter Type, Rip Type, Material, Format and Imaging Window as well as the punch settings of your output devices. Entry can occur manually or by means of a IPR/Query file.

1.

2.

In a first step we will create the data set for the Suprasetter105_XL105.

Go to the Machines tab in the Browser window.

3.

Click the gray arrow to show the contents of the Platesetters group.

5.

The directory for the new group is created in the directory tree. Type your own name as the group name.

4.

6.

Create a new group. To do so click the Platesetters item and choose New Group from the shortcut menu.

To create a new data set click the group you just created and choose New Platesetter Properties from the shortcut menu.

100

Chapter 7: Exercise 6 – Creating machine parameters –Print Media Academy

i

7.

The Platesetter Editor opens.

8.

Now enter all information necessary for the platesetter in question in the Platesetter Editor.

9.

Type the Suprasetter105 designation in the Name text box.

10. To load the platesetter parameters from file highlight the IPR/Query File option in the Mode for Imagesetter Definition section.

The pertaining RIP can create the IPR/Query file. Save the query file in the following directory: C:\Dokumente und Einstellungen\All Users\Anwendungsdaten\Heidelberger \PrinectSignaStation_3\ Ipr_Qry

Startvolume\Benutzer\Für alle Benutzer\Heidelberger\PrinectSignaStation_1\Ipr_Qry

11. To load the query file click

next to the Path option of the IPR/Query File section.

Print Media Academy â&#x20AC;&#x201C; Chapter 7: Exercise 6 â&#x20AC;&#x201C; Creating machine parameters 101

12. Choose the file matching the output device (here: Supra105_1.ipr) in the Ipr_Qry directory and click Open.

13. The file loaded will correctly complete all parameters.

14. Click Save to save the entries.

15. The parameter set you have created appears in your group directory.

102

Chapter 7: Exercise 6 â&#x20AC;&#x201C; Creating machine parameters â&#x20AC;&#x201C;Print Media Academy

Creating a sheetfed press:

When creating a new parameter set for a sheetfed press you define the maximum plate format, the print lead edge, the gripper edge, the maximum paper and printing format as well as the number of ink zones and the ink zone width.

1.

Create a new data set for the XL105_6 sheetfed press.

3.

Click the gray arrow to show the contents of the Sheetfed Presses group.

2.

Go to the Machines tab of the Browser window.

4.

You must first create a new group. To do so click the Sheetfed Presses item and choose New Group from the shortcut menu.

5.

The directory for the new group is created in the directory tree. Type your own name as the group name.

6.

To create a new data set click the group you just created and choose New Sheetfed Press Properties from the shortcut menu.

Print Media Academy – Chapter 7: Exercise 6 – Creating machine parameters 103

7.

The Sheetfed Press Editor opens.

8.

Specify all necessary information regarding the XL105_6 sheetfed press.

9.

Type the XL105_6 designation in the Name text box.

10. Complete the dialog with the following values: Ink zone Number: Width:

Plate size Width: Length:

Printabel Area Lead Edge of Print: Tail Edge of Print*: Print Margin**: Gripper:

32 32.5 1055 mm 811 mm 53 mm 18 mm 2,5 mm 10 mm

Enable the Perfecting option in the Module section.

You also find these details in the Data sheet: Sheetfed Presses table at the beginning of the present exercise or in the Appendix chapter. * Tail Edge of Print: is the upper plate distance to the print tail edge and can be calculated as follows:

– Plate height – max. printing format height – lead edge of print:

= – 811 mm = – 740 mm = – 53 mm = 18 mm

104

Chapter 7: Exercise 6 – Creating machine parameters –Print Media Academy

** The print margin is calculated as follows: – Plate width – max. printing format width Center (10:2)

= – 1055 mm = – 1050 mm = – 100 5 mm = 2,5 mm

11. Make sure your entries are as follows:

12. Click Save to save the new data set.

13. The new plate template you have created appears in your group directory.

Print Media Academy – Chapter 8: Exercise 7 – Creating output parameters and plate templates 105

Chapter 8: Exercise 7 – Creating output parameters and plate templates Task

In this exercise we will create a new output parameter set for output and a new plate template.

Create a new group for each of the new data sets. Type your own name for each of the group names.

Creating an output parameter set

General Name: Imagesetter type: Data set: Material: Workflow: Output folder path: Options Output: Visual Effects Scale:

Suprasetter105_XL105 Platesetter Suprasetter105 from your own group SM_105@-1 PDF Default directory One job per press sheet or web Enable Proof color + Dimensions in Proof Color 100%

106

Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates â&#x20AC;&#x201C; Print Media Academy

Creating a plate template Name: Press: Output parameter set:

XL105_composite mark XL105_6 from your sheetfed press grooup Suprasetter105_XL105 from your output parameter set group

Marks to be positioned Color control mark FOGRA_XL105_composite mark Registration marks (Arc) PullLay Auto registration mark 4AR_10x90 Text mark Plate control bar PKS_Elektra_12F_V6.61a

from the FOGRA_XL105 group from the Standard group from the Standard group from the Autoregister group from your own Marks group from the Plate group

Print Media Academy â&#x20AC;&#x201C; Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates 107

Exercise description

Creating output parameters

In the Output Parameter Sets resource directory you define device- or job-specific output parameters.

You can define more than one output parameter set for an output device, e.g. differing by the material used or enabled/disabled CIP3 data.

1.

2.

3.

In the following step we will create an output parameter set for the Suprasetter105 platesetter.

From the Browser window go to the Resources tab.

Click the gray arrow to show the contents of the Output Parameter Sets group.

4.

You must first create a new group. To do so click the Output Parameter Sets item and choose New Group from the shortcut menu.

5.

The directory for the new group is created in the directory tree. Type your own name as the group name.

108

Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates â&#x20AC;&#x201C; Print Media Academy

6.

To create a new output parameter set click the group you just created and choose New Output Parameter Set from the shortcut menu.

7.

The Output Parameter Set Editor opens. The window features four tabs: General, Options, Punches, and Finishing.

8.

Type the Suprasetter105_XL105 designation in the Name text box.

9.

Enable the Platesetter option.

Print Media Academy â&#x20AC;&#x201C; Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates 109

10. Load the platesetter parameter set named Suprasetter105 from your own Platesetter group directory and confirm your selection by clicking OK.

11. Loading the platesetter parameter set automatically enters the width and the height of the material used. Please choose the material SM_105@-1.

110

Chapter 8: Exercise 7 – Creating output parameters and plate templates – Print Media Academy

12. Choose the Device MetaDimension in the Workflow pop-up menu. As variant choose the option via PDF in the pop-up menu. Automaticly you get the tab Punches.

13. Use the default directory to save PDF files.

14. Go to the Options tab.

15. Click the One job per press sheet or web option in the Output area.

16. Click the ProofColor option in the Visual Effects section to automatically verify the press sheet’s registration against a form proof. It is possible to get the dimensions also on a formproof. Herefore you select the option Dimensions in Proof Color.

Print Media Academy â&#x20AC;&#x201C; Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates 111

17. Choose the option Imagesetter Imaging Window at the Imaging Size.

18. Click Save and close the Editor.

19. The parameter set you have created appears in your group directory.

112

Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates â&#x20AC;&#x201C; Print Media Academy

Creating a plate template

The plate templates are saved in the Plate Templates resource directory; they comprise the plate format as such, but also parameters defining the maximum paper width and height, the baseline, the gripper edge, and the maximum imaging window. In addition, a plate template comprises all marks a default Signa job should contain.

The Appendix shows a plate template with all necessary elements.

1.

In the following step we will create a new plate template for the XL105 sheetfed press.

3.

Click the gray arrow to show the contents of the Plate Templates group.

2.

Go to the Resources tab in the Browser window.

4.

Create a new group. To do so click the Plate Templates item and choose New Group from the shortcut menu.

5.

The directory for the new group is created in the directory tree. Type your own name as the group name.

6.

To create a plate template click the group you just created and choose New Plate Template from the shortcut menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates 113

7.

The Plate Template Editor opens.

8.

Type the XL105_composite mark designation in the Name text box.

9.

Load the sheetfed press parameter set named XL105_6 from your own Sheetfed Press group directory and confirm your selection by clicking OK.

10. The Imaging window is bigger as the default,so you get this message. Clicking Yes to confirm your selection.

114

Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates â&#x20AC;&#x201C; Print Media Academy

10. Choose the Suprasetter105_XL105 data set from your Output Parameter Sets group directory as the output parameter set.

11. After activating all parameters the result should be like this.

Print Media Academy – Chapter 8: Exercise 7 – Creating output parameters and plate templates 115

Positioning marks on the plate template

There are several ways to position marks on a plate template. You can either load the marks in the Marks tab and position them, or you can simply drag and drop marks from the Marks Resources to the template and then position them using the Marks tab.

You will see hotspots – magnetic anchors – allowing the marks to be automatically positioned when you drop marks on the plate template. The hotspots are printing plate-, paperor subject-specific.

A mark positioned, for example, on a paper hotspot will automatically change its position when the paper size is reduced or increased in the current Signa job.

Choose a Subject Hotspot to ensure the marks always adapt to the currently used folding sheet/assembly block.

Changes always occur from the selected reference point when you change the X- and Yposition using the Marks tab. Positive values will move the selected mark upward or to the right, negative values move the mark downward or to the left.

i

116

Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates â&#x20AC;&#x201C; Print Media Academy

1.

2.

3.

4.

5.

We will first position the color control bar.

Go to the Marks Resources tab in the Plate Template Editor, drag the FOGRA_XL105_composite mark color control bar from the FOGRA_XL105 marks directory and drop it on the upper middle subject hotspot.

Release the mouse button when the mark snaps into place.

Go to the Default Marks directory to position the registration marks.

Drag the Arc mark and drop it on the upper left subject hotspot.

Print Media Academy â&#x20AC;&#x201C; Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates 117

6.

Release the mouse button when the mark snaps into place.

7.

Place three additional registration marks on the subject: lower left, lower right, and upper right.

8.

Choose the PullLay mark in the default marks directory to position the pull lay and drop it on the lower right paper hotspot.

118

Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates â&#x20AC;&#x201C; Print Media Academy

9.

To set the Slugline drag the Text mark from the marks group directory and drop it on the lower left paper hotspot.

10. Go to the Autoregister marks directory to set the Auto registration mark.

11. Drag the 4AR_10x90 mark and drop it on the lower left paper hotspot.

12. Position the 4AR_10x90 mark once again on the plate template. Choose the lower right paper corner as the hotspot.

Print Media Academy â&#x20AC;&#x201C; Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates 119

13. Finally set the plate control mark.

13. Display the contents of the Plate marks directory.

14. Drag the PKS_Elektra_12F_V6.61a mark and drop it on the middle lower printing plate hotspot.

15. Now that all marks are on the plate template you can define the position in relation to the respective reference point.

16. Go to the Marks tab.

120

Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates â&#x20AC;&#x201C; Print Media Academy

i

17. All marks positioned on the plate template appear in the Marks List. Highlighting a mark in the list automatically selects the mark in question in the preview window. Selecting a mark in the preview window automatically highlights the mark in question in the Marks List.

18. Highlight the color control mark in the list and move it upward by 15 mm. To do so, specify a value of 15 mm in the Position Y: text box.

19. To facilitate assessing the result you can scale the view by either choosing the desired factor in the Zoom pop-up menu or by dragging a rectangle over the desired area with the Zoom tool.

Print Media Academy – Chapter 8: Exercise 7 – Creating output parameters and plate templates 121

20. Move the registration marks as follows and scale them down to 60%: Lower left registration mark: Upper left registration mark: Lower right registration mark: Upper right registration mark:

X-position: –30 X-position: –30 X-position: 30 X-position: 30

Y-position: 30 Y-position: –30 Y-position: 30 Y-position: –30

21. The auto registration mark should have a distance of ca. 10 mm from the paper. Move the auto registration marks as follows: Lower left auto registration mark: X-position: 15 Lower right auto registration mark: X-position: -15

Y-position: 100 Y-position: 100

122

Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates â&#x20AC;&#x201C; Print Media Academy

22. Position the text mark. Type 20 mm in Position X: and 0 mm in Position Y:.

23. Position the PullLay in Position Y: 80 mm and scale it to 60%.

Print Media Academy â&#x20AC;&#x201C; Chapter 8: Exercise 7 â&#x20AC;&#x201C; Creating output parameters and plate templates 123

24. Finally position the plate control bar. Choose the Lower middle option as Reference Point and type the value of 20 mm in the Position Y: text box.

25. Click Save to create the plate template.

26. The new plate template you have created appears in your group directory.

124

Notes â&#x20AC;&#x201C; Print Media Academy

Print Media Academy – Chapter 9: Exercise 8 – 1up repetition and gang run form

Chapter 9: Exercise 8 – 1up repetition and gang run form Task

In the first step of this exercise we will create a new customer data set for Gordon Ltd.

In the second exercise step you will learn how to create 1ups from several documents of different size and how to position them on the press sheet. The montage is to be set up as single-sided (no back). The individual 1ups are positioned on the gap and the marks automatically created while 1ups are generated. The assembly blocks generated by the Assistant are automatically aligned to each other on the press sheet.

Job data: Job number: Job Name: Customer:

0004 Gang run form from data set

Printing plates: Plate: Placing Mode: Paper definition:

XL105_composite mark from your own group folder Single-sided Creato_200_88x63 from the Training group

General product part information: Name: Gordon and Canon Working Mode: Montage

Assembly Blocks PDF document:

Gordons_Briefbogen_4c.pdf* Stundenplan_4c.pdf Canon_Etikett_4c.pdf Gordons_Visitenkarte_4c.pdf*

*rotation by 90°

Autom. Cut marks: Distance to 1up X: Distance to 1up Y:

Size:

1up:

Name:

210x297 mm 297x210 mm 113x87 mm 54x85 mm

1 1 24 6

St Tt Canon B

activate 6 mm 6 mm

1x1 1x1 4x6 3x2

Left, right, top and bottom margins: 10 mm each 10 mm each 10 mm each 10 mm each

125

126

Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form â&#x20AC;&#x201C; Print Media Academy

Completed Form: Press sheet 1:

Print Media Academy â&#x20AC;&#x201C; Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form

Exercise description

Creating a customer data set

You can create data sets for regular customers in the Customer Data resource folder that can be loaded when a new Signa job is generated.

1.

In the first step of this exercise we will create a data set for Gordon Ltd.

3.

Click the gray arrow to show the contents of the Customer Data group.

2.

Select Jobs & Resources > Resources & Machines in the menu to go to the Resources tab in the Browser window.

4.

You must first create a new group. To do so click the Customer Data item and choose New Group from the shortcut menu.

5.

The directory for the new group is created in the directory tree. Type your own name as the group name.

6.

To create a customer data set click the group you just created and choose New Customer Data ... from the shortcut menu.

127

128

Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form â&#x20AC;&#x201C; Print Media Academy

7.

The Customer Data Editor opens.

8.

Specify customer data.

9.

Click Save to save the customer data set in your group folder.

10. The new customer data set appears in your group directory.

Print Media Academy – Chapter 9: Exercise 8 – 1up repetition and gang run form

Creating a gang run form 1.

2.

To create a new Signa job, choose File > New…

In the Job Assistant, enter the Job Code and the Job Name according to the task in the Job Data window.

Job code Job name

3.

0004 Gang run from

Load the customer data set of the Gordon Ltd. customer from your group folder.

129

130

Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form â&#x20AC;&#x201C; Print Media Academy

4.

For information on the selected customer click the Info icon Number in the Job-Assistant.

5.

Click Next card to go to the Job Part Definition window.

7.

Click Continue to go to the Printing Plate window.

6.

8.

next to the Customer

In the Name text box, enter the designation Gordon and Canon and enable the Montage option in the Working Mode region.

Select the XL105_composite mark plate template from your directory of plate templates.

Print Media Academy â&#x20AC;&#x201C; Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form

9.

Choose the Single Form (No Back) option in the Placing Mode pop-up menu.

10. Choose the paper with the designation Creato_200_88x63 from the Training directory.

11. Click Continue to go to the Assembly Blocks window.

12. Define the first assembly block for the Gordons_Briefbogen file by clicking the icon next to the No assembly block defined pop-up menu.

13. Type Gordon in the dialog and click Apply.

14. Click the icon in the 1up Definition section. Select the A4 standard format and click OK to quit the window.

131

132

Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form â&#x20AC;&#x201C; Print Media Academy

15. Type St in the Name box to better identify the placeholders on the press sheet. Rotate the page to 90 ° , enable the Autom. cut marks option and choose Black. Leave the trim at 3 mm.

The assembly block just created appears in the press sheet thumbnail view at the bottom right.

16. Type the following values in the Assembly Block Parameters region to position the assembly block on the press sheet:

i

Copies X: Position X: Left Margin X: Bottom Margin:

1 0 mm 10 mm 10 mm

Y: Y: Right: Top:

1 0 mm 10 mm 10 mm

The paper origin (bottom left paper corner) in relation to the assembly element/block origin (assembly element bottom left) is used as reference point for positioning assembly elements/blocks. Leave Position X and Y at 0 since the 1ups are to be automatically arranged on the press sheet.

The defined margins will be applied later for automatically arranging the assembly blocks in order to define the gaps between separate assembly blocks.

Print Media Academy – Chapter 9: Exercise 8 – 1up repetition and gang run form

17. Create a new assembly element and name it Schedule.

18. Load the A4_landscape standard format in the 1up Definition section. Rotate the page to 0° , enable the Autom. cut marks option and choose Black. Leave the trim at 3 mm.

Type Tt as the name.

133

134

Chapter 9: Exercise 8 – 1up repetition and gang run form – Print Media Academy

19. Type the following values in the Assembly Block Parameters region to position the assembly block on the press sheet: Copies X: Position X: Left Margin X: Bottom Margin:

1 0 mm 10 mm 10 mm

Y: Y: Right: Top:

1 0 mm 10 mm 10 mm

The assembly block is thus precisely positioned on the assembly block created before.

20. Create the next assembly element and name it Label.

21. Enter a width of 113 mm and a height of 87 mm in the 1up Definition region. Rotate the page to 0 ° , enable the Autom. cut marks option and choose Black. Leave the trim at 3 mm. Type Canon as the name.

Print Media Academy – Chapter 9: Exercise 8 – 1up repetition and gang run form

22. Type the following values in the Assembly Block Parameters region to position the assembly block on the press sheet: Copies X: 4 Distances X: 6 mm Position X: 0 mm Left Margin X: 10 mm Bottom Margin: 10 mm Same Content for All 1ups:

Y: Y: Y: Right: Top: enable

6 6 mm 0 mm 10 mm 10 mm

23. Create the next assembly element and type Gordon2 as the name.

24. Enter a width of 54 mm and a height of 85 mm in the 1up Definition region. Rotate the page to 90° and enable the Autom. cut marks option. Leave the trim at 3 mm. Type B as the name.

135

136

Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form â&#x20AC;&#x201C; Print Media Academy

25.

Type the following values in the Assembly Block Parameters region to position the assembly block on the press sheet: Copies X: 3 Distances X: 6 mm Position X: 0 mm Left Margin X: 10 mm Bottom Margin: 10 mm Same Content for All 1ups:

Y: Y: Y: Right: Top: enable

2 6 mm 0 mm 10 mm 10 mm

26. Click Ready to create the assembly part once you have made up all assembly blocks.

Print Media Academy â&#x20AC;&#x201C; Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form

27. The Press Sheet graphics window should now show the following result.

28. Go to the Press Sheet graphics window to automatically arrange the assembly blocks on the press sheet.

29. To do so choose Arrange Folding Sheet/Assembly Block from the shortcut menu.

137

138

Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form â&#x20AC;&#x201C; Print Media Academy

30. Disable the Automatic rotation option in the AutoArrange properties window and type the following values in the text boxes: Margin Left: 0 Margin Bottom: 15

Right: Top:

0 0

31. Click AutoArrange. The Press Sheet graphics window should now look as follows.

Print Media Academy â&#x20AC;&#x201C; Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form

32. To fit the print control strip to the sujet choose Fit Marks and Trims from the context-sensitive menu in the Press Sheets graphics window.

33. The assembly elements created with the Job Assistant appear with the defined names when you show the separate folding sheets in the Jobs browser window.

34. The Folding Sheets tab provides information on the existing folding sheets.

139

140

Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form â&#x20AC;&#x201C; Print Media Academy

35. Choose File > Save as... and save the job under the proposed name in the predefined folder.

36. Download all the PDF documents of the Signa_Training/Uebung8 directory either using File > Import > Documents or, in the Browser window, go to the Contents tab and choose Documents using the shortcut menu.

37. You must now fill the 1ups, i. e. assign the respective pages.

38. Show the Press Sheet Inspector in the Inspectors window.

39. The Press Sheet Inspector displays the current block name when you now click a 1up or assembly block in the Press Sheet graphics window. This facilitates the assignment of separate pages to the selected 1up.

40. Drag the Canon_Etikett_4c.pdf document onto the respective press sheet 1up.

Print Media Academy â&#x20AC;&#x201C; Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form

41. Assign the remaining documents to the 1ups.

42. To horizontally center all assembly blocks on the press sheet, go to the Press Sheet Inspector. Click the Horizontal button. You should see the following result in the Press Sheet graphics window at the end of this exercise step.

141

142

Chapter 9: Exercise 8 – 1up repetition and gang run form – Print Media Academy

43. Click the

icon to make settings for the dimensions.

44. Click the dimension. You can now choose the predefined dimensions you want to see on the proof later. Confirm the dialog with “OK”.

Print Media Academy â&#x20AC;&#x201C; Chapter 9: Exercise 8 â&#x20AC;&#x201C; 1up repetition and gang run form

45. Choose File > Save in the menu to save the changes.

46. Print the Signa job as a PDF.

47. To do this, use the Output Parameter Set that you generated in exercise 7.

143

144

Notes â&#x20AC;&#x201C; Print Media Academy

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

Chapter 10: Windows and Inspectors The Job window

The job window of the program is divided into 4 dialogs, each of which covers a specific range of functions: Browsers (1), Inspectors (2) Graphics (3) and Lists (4).

1

3

2

4

To view the entire contents of the window, you can change the window to full screen size automatically by double-clicking the title bar of the corresponding window. If you doubleclick the title bar again, the window returns to the previous size.

To manually increase or decrease the size of a window, click the size change control that is located above the title bar and, while holding down the mouse button, drag the window to the desired size.

145

146

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

The Browser Window

The Browser Window contains four tabs: Jobs, Contents, Resources and Machines.

Jobs

The Jobs tab displays the current job, with all job parts, folding sheets, page lists, press sheets and positioned marks, in a tree structure; each individual item has its own tree structure. To show the individual branches, click the triangle located in front of each item.

If you show the shortcut menu in this window, the commands for opening an already existing Signajob and for creating a new Signajob are available.

Contents

The Contents tab displays the PDF documents that have already been imported. This tab can be used to import new PDF documents, load the entire document or selected pages to the press sheet or delete the assignment of pages from the press sheet.

The page symbols indicate whether the preview has been created for a page and whether a page has already been assigned or not.

Preview has not yet been created; page has not yet been assigned Preview has been created; page has not yet been assigned Page has already been assigned

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

If you click within the window with the right mouse button (Windows) or while holding the Control key (Macintosh), you can use the shortcut menu to choose Documents, with which PDF documents can be imported into the current job.

If you open the shortcut menu in a file that has already been imported, you can open the Document Inspector, create the preview of the entire file, open the document in Adobe Acrobat and remove the document from the current job. If changes have been made in the PDF document, you can reload it, add all the pages of a document, or delete the page assignment of the document.

147

148

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

If you activate a page, you can use the shortcut menu to open the Document Inspector, create the preview of the selected page, open the document in Adobe Acrobat and assign the page or delete the page assignment.

Resources

The Resources tab is used to create, edit and administrate the templates/defaults for jobs, job parts, templates, plate templates, schemes, marks, papers, page formats, customer data and output parameter sets.

Resources consist of settings/defaults that are defined once and can be used over and over. In the case of a plate template, for example, not only the paper to be used, but also all the marks that are related to the plate template, can be set so that these steps do not have to be carried out again and again.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

The individual entries are arranged in a tree structure. To show the individual branches, click the triangle in front of the entry.

Fo a better overview, the individual resources can be divided into groups. To create a new group, click a resource entry and open the shortcut menu. If you open the shortcut menu on an active group, you can rename or delete a group or copy resources to the clipboard.

Depending on the type of group selected, you can, for example, create a new plate template, a new mark, etc.

Creating a new group

Editing a group

Editing an individual object of a group

To edit individual elements of a group, highlight the desired object and open the shortcut menu. You can now edit the highlighted object (this can also be done by double-clicking it), create a new object, copy the selected object, copy resources to the clipboard or paste resources from the clipboard.

Machines

The Machine tab is used to create and administrate default settings for filmsetters, platesetters, sheetfed presses and web presses.

The individual entries are arranged in a tree structure. To show the individual branches, click the triangle in front of the entry.

Fo a better overview, the individual resources can be divided into groups. To create a new group, click a resource entry and open the shortcut menu. If you open the shortcut menu on an active group, you can rename or delete a group or copy resources to the clipboard.

Depending on the type of group selected, you can, for example, create a new platesetter data set, etc.

149

150

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

Creating a new group

Editing a group

Individual object of a group Editing

To edit individual elements of a group, highlight the desired object and open the shortcut menu. You can now edit the highlighted object (this can also be done by double-clicking it), create a new object, copy the selected object, copy resources to the clipboard or paste resources from the clipboard. Using Copy Resource and Paste Resource, you can copy an object from one group to another.

The Inspectors Window

There are 6 inspectors in the Prinect Signa Station program, with which the entries that were defined using the Job Assistant can be inspected/changed in the current job: Job Inspector, Inspector for Job Parts, Folding Sheet Inspector, Press Sheet Inspector, Page/1up Inspector and Document Inspector. The Inspector window is the only dynamic window since it always adapts itself to the selected inspector.

The individual inspectors can be opened using the Inspectors command, the corresponding icon in the toolbar or by opening the shortcut menu in the Graphics or List window.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

The Job Inspector

The Job Inspector is divided into two tabs: Administrative Data and Colors.

The Administrative Data tab can be used to inspect/change job-related information, such as Job Code, Job Name and Customer, the number of layers used etc. for the current job.

The Colors tab is used to list the colors used in the loaded and assigned PDF document.

With this tab, spot colors can be transformed into CMYK or combined with another spot color. Spot colors can be assigned to a specific mark layer using this window.

151

152

Chapter 10: Windows and Inspectors – Print Media Academy

The Inspector for Job Parts – impositioning and automatic impositioning

The Inspector for Job Parts is divided into five tabs: Definition, Master Pages, Binding, Plates and Schemes.

The Definition tab can be used to change the title of the selected job part, enter comments and change the working mode. If the Job Assistant was used to select the Imposition working mode, this tab can be used to subsequently change the page total. If you are working in Imposition Mode, you can also change the page names – the page index – of individual marked pages here to, for example, more easily differentiate the cover of a job from the inner pages. For some documents, this can significantly simplify the assignment of the individual pages to the press sheet.

The Master Pages tab can be used to specify/change the page definitions of the master pages, the trimmed size, the trim, and the scale, rotation and mirroring of the pages.

Special master pages can also be created and their size can be determined in this tab.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

In the Binding tab, you can select the binding procedure, enable creeping and subsequently specify the creeping values. If the cut, fold, and collating marks were not enabled when a Signajob was created, you can enable them in this window so that they are set automatically. In the Gripper Margin and Folding Machine region, you can subsequently enable a gripper fold rear or a gripper fold front and enter the desired gripper margin.

The currently selected template can be inspected and changed in the Plates tab. The rule for generating the back sheet can be changed using the Placing Mode pop-up menu. The selected paper is shown in the Paper Definition region and can be changed there for the current job.

You can inspect and change the selected folding scheme and the template in the Schemes tab. The distances for the top, bottom and inside gutters can be changed subsequently using this tab. You can also assign special master pages in this window. To assign a special master page, click the appropriate page symbol in the schematic representation and choose Assign Master Page from the shortcut menu.

153

154

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

The Inspector for Job Parts â&#x20AC;&#x201C; Montage

If theMontage option was selected when a job was created, the Inspector for Job Parts has only two tabs: Definition and Plates.

The Folding Sheet/Assembly Block Inspector

The Folding Sheet/Assembly Block Inspector is divided into three tabs: Attributes, Marks and Marks Resources.

If the Imposition or Autom. Imposition option was chosen as the Working mode, you can use the Attributes tab to change the X- and Y-positions of the folding sheet and to align the folding sheet horizontally, vertically or in both directions in relation to the paper. The top, bottom and inside gutters can be changed using the thumbnail display of the scheme. All changes can be carried out on all sheets of the same type. If the Montage option was chosen as the Working mode, this tab can be used to create new assembly blocks or to repeat and position existing assembly blocks.

Working Mode: Imposition and Autom. Imposition

Working Mode: Montage

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

The Marks tab can be used to position the marks in relation to the selected scheme. Cut, fold, and collating marks can also be incorporated using this window. The width, height and clip path of a mark (the part that can be imaged) can be specified in Expert Mode. All changes can be carried out on all sheets of the same type.

The Marks Resources tab can be used to position individual marks on the folding or assembly sheet using drag-and-drop.

155

156

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

The Press Sheet Inspector

The Press Sheet Inspector is divided into three tabs: Press Sheet, Marks and Marks Resources.

The sheet name and the sheet size for the currently selected press sheet can be changed in the Press Sheet tab. It is also possible to change the paper size, to make offsets and to offset the start of the paper in this tab. The list provides information about the assigned folding sheets/assembly blocks of the currently highlighted press sheet. In the lower region of the dialog, the X- and Y-positions of the folding sheet in relation to the press sheet can be offset. All changes carried out here can be transferred to all press sheets of the same type.

In the Marks tab, the marks can be positioned in relation to the press sheet, while previously positioned marks can be changed/deleted. The width, height and clip path of a mark (the part that can be imaged) can be specified in Expert Mode. All changes can be carried out on all sheets of the same type.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

The Marks Resources tab can be used to position individual marks on the press, folding or assembly sheet using drag-and-drop.

The Page/1up Inspector

The Page/1up Inspector is divided into three tabs: Attributes, Marks and Marks Resources.

The Attributes tab displays the current trimmed size of the highlighted page/1up; the trimmed size cannot be changed in this window. The Trim region can be used to change the trim for individual pages.

To offset the contents of the page in relation to the trimmed size, enable the By user (view options) option and enter the desired offset values in text boxes Offset X and Offset Y. The contents of the page are offset in relation to the top left corner. Positive values will move the contents of the page downward or to the right, negative ones upward or to the left. If you want to increase/decrease the contents of the page, enter the scaling factor in text boxes Scale X and Scale Y. In the Creep Values region, you can enable creep and enter the creep value in the X and Y directions.

157

158

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

In the Marks tab, the marks can be positioned in relation to the selected page, while previously positioned marks can be changed or deleted. The width, height and clip path of a mark (the part that can be imaged) can be specified in Expert Mode. All changes can be carried out on all pages from here.

The Marks Resources tab can be used to position individual page-related marks using drag-and-drop.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

The Document Inspector

The Document Inspector is divided into two tabs: Document and Page.

The Document tab displays general information about the currently selected document.

The information displayed in the Properties region consists of metadata that can be saved when a PDF file is created with the Acrobat Distiller program. In this case, options Process DSC Comments and Retain document information from DSC in the Extended tab must be enabled in the Job Options with which the PostScript document is converted to PDF. The colors used thoughout the entire document are displayed in the list of Available Colors.

The Page tab displays information about the currently highlighted page. The values for the TrimBox are displayed in the TrimBox region; these can be changed for the current page or for all the pages of a document if the Apply to All Pages option is enabled. You can offset the contents of the page in relation to the TrimBox in the Rel. Position X and Y fields.

The colors used on the highlighted page are displayed in the Available Colors region.

159

160

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

The Graphics Window

The Graphics Window contains 5 tabs in which you can visually inspect the graphic representation of the press sheet, the folding sheet, the page list, the templates list and the document.

Graphics Window control elements

You can find control elements, which you can use to control the contents of a Graphics Window, in the lower region of Graphics Windows Press Sheet, Folding Sheet and Document.

The current cursor position is displayed in fields X and Y.

You can use the Color pop-up menu to check how many print forms are used for each press/folding sheet or to see which colors are used on the highlighted page. If you are working with separated PDF documents, you can use the Color pop-up menu to go to the individual color separations; if you choose Colored, a composite view in color appears.

The Scale pop-up menu can be used to select the scale of the press sheet, folding sheet and document views. If you choose the Auto option, the press sheet, folding sheet or document is automatically adapted to the current window size.

This symbol can be used to show/hide the back in Graphics windows Press Sheet and Folding Sheet.

Clicking this symbol shows the dialog for adjusting the representation, scale and grid for displaying the press sheet, folding sheet or document.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

The Press Sheet window

The Press Sheet Window shows the currently selected press sheet, including the plate template, paper and all the marks. In this view, you can also see whether the regions of the page to be printed were positioned in the critical area.

If you call up the shortcut menu at any point in the Press Sheet window, you can also open the Press Sheet Inspector or the Folding Sheet Inspector using this menu.

In order to be able to execute commands Swap Front and Back Folding Sheet, Swap Folding Sheet/Assembly Block and Delete Folding Sheet/Assembly Block, the shortcut menu must be opened in the Press Sheet window if a folding sheet / assembly block has been enabled (this can be seen by the yellow frame). The Resize Color Control Mark to Subject command is used to automatically adapt a positioned color control mark to the width of the printed image. The Graphics command is used to save the highlighted press sheet as an image or to print it. The Preview command is used to create the original view of the pages assigned to the press sheet.

161

162

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

The Folding Sheet/Assembly Block Window

The Folding Sheet/Assembly Block Window shows the currently selected folding sheet, including the marks assigned using the folding sheet. Marks that are located on plate templates are not displayed in this window.

You can use the shortcut menu to open the Folding Sheet/Assembly Block Inspector or the Page/1up Inspector. The Preview command is used to create the original view of a highlighted page. The Graphics command is used to save the highlighted folding sheet as an image or to print it.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

The Page List Window

In the Automatic/Montage working mode, the blank pages (placeholders) of the first print sheet or the pages that have already been assigned are displayed in the Page List window. If you have selected the Imposition option as the working mode, all the blank pages (placeholders) â&#x20AC;&#x201C; or the pages that have been assigned â&#x20AC;&#x201C; are displayed for the entire print job.

You can use the shortcut menu to generate the preview on a highlighted page and to delete the page assignment.

This window can be used to, for example, add individual pages from the Not assigned list window by drag-and-drop or to replace contents that have already been assigned.

163

164

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

The Press Sheet List Window

The Press Sheet List window displays an overview of all the press sheets that have been created in the job.

You can use the shortcut menu to open the Press Sheet Inspector and output press sheets.

The Document Window

The Document Window displays a selected page.

You can use the shortcut menu to open the Document Inspektor, generate the Preview of this page or open the entire document in Adobe Acrobat.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

The Lists Window

The Lists Window contains 5 tabs in which the contents of the folding sheet, page list, press sheet, assigned contents and unassigned contents are shown in tables.

If you open the shortcut menu on a column header in one of the list windows, you can remove the highlighted column from the list, automatically adapt the column size to the contents of the column, open the dialog for choosing the fields that are available, display all the contents in a table line or, if all the contents are displayed, display only the main rows.

If you use the shortcut menu to enable the Select Columns command, you can choose, in the subsequent window, the fields that are to be displayed in the currently displayed list.

To add further fields, highlight the desired field in the Available Fields list and click Add Field. To remove fields from the list, highlight the desired field in the Available Fields list and click Remove Field. To change the order of the rows, highlight a field in the Available Fields list and use the up or down arrow to move it to the desired position.

Confirm the changes by clicking OK.

165

166

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

The Press Sheet List Window

This list contains, among other things, information about the generated press sheets, the printing plate format, the folding sheet used (front and back printing), the colors in the document, the job name of the job part and the paper size.

If you double-click a press sheet entry, the front form and, if present, the back form are displayed. To display the colors for each press sheet, double-click the individual forms.

You can use the shortcut menu to open the Press Sheet Inspector, start the output for the selected press sheet , or save/print the press sheet list as an HTML file.

The Folding Sheet List Window

The Folding Sheet List contains information about the number of folding sheets in the job, the designation of the folding sheets and the name of the job part. The number of pages per folding sheet in the horizontal and vertical directions is displayed in the Format region. You can find the positioning of the first and last pages of a folding sheet in the Pages column.

You can use the shortcut menu to open the Folding Sheet or Press Sheet Inspector, save the list as an HTML file or print the table.

The Page List List Window

The Page List contains information about the pages that have already been assigned. The imported PDF document is shown in the Page Name column, the defined master page format (trimmed size) in the Format column, the selected scheme and the folding sheet on which the page was positioned in the Folding Sheet column and the colors that are used on the individual pages in the Colors column.

Print Media Academy â&#x20AC;&#x201C; Chapter 10: Windows and Inspectors

This is the only window in which a shortcut menu cannot be opened.

The Assigned List Window

The Assigned list contains general information about the pages that have already been assigned to the job.

If you open the shortcut menu, the commands for opening the Document Inspector, generating the preview, opening the entire document in Adobe Acrobat and deleting the page assignment for the pages highlighted in the list are available. The list can be saved an an HTML file or printed.

167

168

Chapter 10: Windows and Inspectors â&#x20AC;&#x201C; Print Media Academy

The Not Assigned List Window

The Not Assigned list contains general information about the pages that have not yet been assigned to the job.

If you open the shortcut menu, the commands for opening the Document Inspector, generating the preview, opening the entire document in Adobe Acrobat and deleting the page assignment for the pages highlighted in the list are available. The list can be saved an an HTML file or printed.

Print Media Academy – Chapter 11: Exercise 9 – 1up Repetition Front/Back

Chapter 11: Exercise 9 – 1up Repetition Front/Back Task

In the first step of this exercise you will learn how to create a new color control bar in Prinect Signa Station.

In a second step, you will learn how to easily and quickly create multiple 1ups from a file positioned on a gap in front and back printing.

In this exercise we will be using a different work method for creating several assembly blocks on one press sheet. We will use the Job Assistant to create only one assembly block in this exercise. Assembly block division will be done in the Signa job.

Job data: Job number: Job Name: Customer:

0005 Post cards Heidelberger Druckmaschinen AG

General job part information Title: Horse theme Working Mode: Montage Printing plates: Plate: Placing Mode: Paper definition:

Assembly block: 1up size: Trim: Autom. Crop Marks: Copies X: Copies Y: Distance to 1up X: Distance to 1up Y: Position X: Position Y: PDF document:

Size:

SM74 from the Training group directory Sheetwise (front and back) Change Creato_200_88x63 from the Training group directory to 700 x 500 mm 148x105 mm 0 activate 4 4 10 mm 0 mm 39 mm 40 mm

Pferde.pdf Pferde_RS.pdf 148x105 mm – trim box is defined

169

170

Chapter 11: Exercise 9 – 1up Repetition Front/Back –Print Media Academy

Color control bar example

Surfaces: Front:

Back:

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

Exercise description

Creating color control bars and composite marks

Prinect Signa Station allows ink pickup bars, color control bars and special color control bars to be created. In this step you will learn how to create several color control bars to be finally combined into a composite mark.

Color control bars always organize elements according to their color sequence, with identical ink coverage values for all colors. In a special color control bar, however, the element sequence of special color control bars as well as their ink coverage values can be defined as desired.

1.

Select Jobs & Resources > Marks in the menu.

2.

Create a new group named Color Control Bars in your Marks group folder.

3.

To do so choose New Mark > Color Control Bar from the shortcut menu.

171

172

Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back â&#x20AC;&#x201C;Print Media Academy

4.

The Color Control Bar Editor opens.

5.

Name the mark CMYK.

7.

Choose the Lower middle option as reference point in the Hotspot pop-up menu.

6.

8.

9.

Choose the Color Control Mark (with AutoClip to sujet) option using the Marks Type pop-up menu.

To do so, specify a mark length of 1000 mm in the Width text box.

Highlight the Cyan, Magenta, Yellow and Black colors in the Choose Color Layer list.

The color selection defines the colors for which elements are to be defined in the color control bar.

10. To do so, specify a value of 5 in the Number of Elements text box. This defines the number of individual control elements per color.

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

11. To do so, specify a value of 6 mm in the Element Width and Element Height text boxes.

This defines the width and the height of each control element.

The mark width automatically changes to 1080 because the color control bar can only contain complete elements and would be trimmed otherwise.

12. To suppress the frames enable the Elements without Frame option.

13. Leave the values in the Ink Coverage region at 20, 40, 60, 80 and 100.

14. Click Save and then Close to save the color mark.

15. The new mark you have created appears in your Color Control Bars group folder.

16. Double click the CMYK mark to create another color control mark (BW color control bar).

i

173

174

Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back â&#x20AC;&#x201C;Print Media Academy

17. Change the Mark Name to Black and enable Black in the Choose Color Layer section.

i

Renaming the mark prevents overwriting the original mark. The mark is thus saved under a new name.

18. Click Save and then Close to save the color mark.

19. Double click the Black mark to create another color control mark (Black + 1 spot).

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

20. Change the Mark Name to Black + 1 spot and enable Black and Spot 1 (X) in the Choose Color Layer section.

21. Click Save and then Close to save the color mark.

22. This way you can create any color control bar you need for your work.

23. The following screenshot shows a selection of possible color control bars. Create the color control bars listed below.

175

176

Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back â&#x20AC;&#x201C;Print Media Academy

Creating a composite mark

In the next step you will create a composite mark from the color control bars you have created.

1.

Highlight the CMYK mark in your Color Control Bars marks folder and choose Edit Mark from the shortcut menu.

2.

The Color Control Bar Editor opens.

3.

Rename the mark to Color control bar_composite mark.

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

4.

To add further color control marks, click the black triangle in front of the Composite Mark option and then click the folder icon to load the next mark from the marks resources.

5.

Highlight the first mark in the Color Control Bars marks folder and then click OK.

177

178

Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back â&#x20AC;&#x201C;Print Media Academy

6.

The new mark appears in the Composite Marks list of the Color Control Bar Editor.

7.

Click the folder icon again and add all other marks contained in the Color Control Bars marks folder to the composite mark.

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

8.

9.

To save the composite mark, click the Save and then the Close button.

The composite mark appears in your marks folder.

179

180

Chapter 11: Exercise 9 – 1up Repetition Front/Back –Print Media Academy

1up front/back repetition exercise

1.

2.

3.

4.

5.

To create a new Signa job, choose File > New…

In the Job Assistant, enter the Job Code and the Job Name according to the task in the Job Data window.

Job code = Job name =

0005 Post cards

Load the customer data set of the Heidelberger Druckmaschinen AG customer from the customer data resource default directory.

Click Next card to go to the Job Part Definition window.

In the Name text box, enter the designation Horse theme and enable the option Montage in the Working Mode region.

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

6.

Click Continue to go to the Printing Plate window.

7.

Choose the Plate Template named SM74 from the Training group in the Resources.

9.

Choose the Paper Format named Creato_200_88x63 from the Training group.

8.

Choose the Turn (Front and Back Sheet) option in the Placing Mode pop-up menu.

10. The paper you selected is too large for the selected plate template, and an message appears that you must confirm by clicking OK.

11. Click the folder icon next to the Width and Height text boxes to define a new paper format in the resources. The Choose Page or Paper Size window opens.

181

182

Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back â&#x20AC;&#x201C;Print Media Academy

12. Click the New button.

13. As the default folder cannot be edited, you are requested to select a custom group. As there is not yet any custom group, type your name in the empty text box to create a group. Confirm with OK.

14. The group will be created since it does not yet exist. You will be prompted once again.

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

15. Type the 700x500 name in the Format Editor. Type the format in the Width and Height text boxes (700x500). Click Save and then the Close button.

16. Now select the paper format you created in your group and click OK.

17. The paper format now appears in the Width and Height boxes of the Paper Definition for Production section in the Printing Plate window.

19. Click Next card to go to the Assembly Blocks window.

183

184

Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back â&#x20AC;&#x201C;Print Media Academy

20. Define the first assembly block by clicking the icon next to the No assembly block defined pop-up menu. Type the Postcard name as assembly element and click Apply.

21. Enter a width of 148 mm and a height of 105 mm in the 1up Definition region. Change the Trim to 0. Make sure the Autom. cut marks are enabled. Enable the Same Content for All 1ups option.

In the bottom right corner you can see position of the assembly block you have created on the paper.

22. The assembly block is now to be positioned on the sheet and repeated four times on a separation cut in both directions.

23. Type the following values in the Assembly Block Parameters region: Copies X: Gaps X: Position X: Margins:

4 10 mm 39 mm 0

Y: Y: Y:

4 0 mm 40 mm

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

24. You can assess the result in the press sheet thumbnail view in the bottom right corner.

24. Click Ready to create the current montage.

25. The Press Sheet graphics window should now show the following result.

26. Choose File > Save As... to save the job to the predefined directory. Accept the proposed file name.

185

186

Chapter 11: Exercise 9 – 1up Repetition Front/Back –Print Media Academy

27. Go to the Folding Sheet/Assembly Block Inspector. Select the second assembly block row on the front.

28. Right click the selected 1up and choose Change or Create Station Number... from the shortcut menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

29. An additional dialog opens where you can select the next free station number. Select number 3. All selected 1ups receive station number 3.

30. Repeat the last two steps to edit the other two 1up rows as well. The result is as follows:

31. Click the icon to go to the back. Here, select the 1ups belonging to postcard #1 on the front. Right click the selected 1up and choose Change or Create Station Number... from the shortcut menu.

187

188

Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back â&#x20AC;&#x201C;Print Media Academy

32. An additional dialog opens where you can select the next free station number. Select number 6. All selected 1ups receive station number 6.

33. The result is as follows:

34. Load the Pferde.pdf and Pferde_RS.pdf files from the Signa_Training/Exercise9 directory.

35. Assign the individual pages (Pferde.pdf) in the Contents tab of the Browser Window the separate 1ups of the front printing form in the Press Sheets Window using drag-anddrop.

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

36. Assign the individual pages (Pferde_RS.pdf) in the Contents tab of the Browser Window the separate 1ups of the back printing form in the Press Sheets Window using drag-and-drop. Page 1 is positioned on 1up 6, and page 2 on 1up 2.

37. You should see the following result in the Press Sheet graphics window at the end of this exercise step.

38 To save the changes choose File > Save.

39. Now the control bars are to be replaced. Open the Press Sheet Inspector and change to the Marks tab.

40. Replace the color control bar with the Color control bar_composite mark created earlier in this exercise.

189

190

Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back â&#x20AC;&#x201C;Print Media Academy

41. Highlight the Colorbar-4C mark (color control mark on front and back) in the list and click the Swap selected mark icon .

To highlight several marks not immediately following each other in the list, press the Ctrl key (Windows) or the Command (Apple) key (Macintosh) and click the marks.

42. Now select the composite mark from the Color Control Bar folder in the next window and click OK.

Print Media Academy â&#x20AC;&#x201C; Chapter 11: Exercise 9 â&#x20AC;&#x201C; 1up Repetition Front/Back

43. Confirm the message box that appears by clicking Yes.

44. The old color control bar is replaced. The new bar is given the same position as the old bar, provided the mark definition such as the hotspot is identical.

45. You should see the following result in the Press Sheet graphics window at the end of this exercise step.

46. Save the changes to the document.

47. To verify print the job as a PDF.

191

192

Notes â&#x20AC;&#x201C; Print Media Academy

Print Media Academy – Chapter 12: Exercise 10 – Different press sheets in one job part

Chapter 12: Exercise 10 – Different press sheets in one job part Task

In this exercise we will process the cover and the inner pages of a 36-page flyer in the Imposition mode. As printing press and paper for the cover differ from the printing press and the paper used for the inner pages you will learn how to set up different parameters in one job part.

Job data: Job code: Job name Customer: Customer code:

Job part definition: Name: Page total: Working mode: Master pages: Page format:

Binding Methods Binding method: Creeping: Print control elements: Printing plates: Printing plate: Placing mode:

Paper definition:

Folding schemes: Scheme: PDF document:

0006 Complete HD flyer Heidelberger Druckmaschinen AG 00001 HD flyer 36 pages Imposition A4 with 3 mm bleed Saddlestitch enable Cut and fold marks SM74_composite mark from your own group XL105_composite mark from your own group Work-and-turn Sheetwise (front and back) Zanders_135_70x50 from the Training group Profisilk_90_100x70 from the Training group HD cover from your own Scheme group directory HD inner pages from your own Scheme group directory

HD_Stadt_dt_engl.pdf from /Signa_Training/Exercise10

193

194

Chapter 12: Exercise 10 – Different press sheets in one job part – Print Media Academy

Surfaces:

Press sheet 1: Front and back sheet – cover

Press sheet 2: Front and back sheet – inner pages

Press sheet 3: Front and back sheet – inner pages

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

Exercise description Creating a new scheme

In the first step of this exercise you will learn how to create new schemes in Prinect Signa Station. You need two new schemes for the first job parts. One scheme for the cover and one scheme for the inner pages.

A

A

A

2.

A

13 16

A

1.

A

A

1

2

A

5

Front

9 12

4

A

A

Back

A

Scheme: Inner pages

A

A

Back

3

A

15 14

A

2

A

8

Front

1

A

7

A

11 10

4

A

A

6

Scheme: Cover

3

Go to the Resources tab in the Browser window.

Click the gray arrow to show the contents of the Schemes group.

3.

You must first create a new group. To do so click the Schemes item and choose New Group from the shortcut menu.

4.

The directory for the new group is created in the directory tree. Type your own name as the group name.

195

196

Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

5.

To create a new scheme click the group you just created and choose New Scheme from the shortcut menu.

6.

The Folding Scheme Editor opens.

7.

Type the HD Cover designation in the File Name and Folding Scheme Name text boxes.

8.

Specify 2 Columns and 1 Row in the Matrix text boxes. Choose the Sheetfed option using the neighboring pop-up menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

9.

Use the schematic page view in the Scheme Generated from Folding Rule region to determine the top page head position on the sheet after folding. In our example the head is to be at the top. To change the rotation click the page edge that is to serve as reference for the page orientation. The letter A always indicates the page head.

10. The scheme is to be created on the basis of the folding rule. Click on the symbol next to the Folding Rule option to open the Fold Assistant.

11. The Fold Assistant opens.

197

198

Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

12. Show the fold animation by increasing the window height and then pulling the zoom in/zoom out tool upward.

13. The first fold is made upward in horizontal direction.

14. Click the icon in the bottom right corner of the folding scheme thumbnail view.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

15. The folding rule is automatically created.

16. Click Apply to apply the folding rule to the folding scheme.

17. The pages are arranged in the Folding Scheme Editor according to the Folding rule.

18. Click Save and then the Close button.

199

200

Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

19. The new folding scheme will be created in your group directory.

20. Create a second scheme for the inner pages.

21. Click your group directory and choose New Scheme in the shortcut menu once again.

22. Type the HD Inner pages designation in the File Name and Folding Scheme Name text boxes.

23. Specify 4 Columns and 2 Rows in the Matrix text boxes and choose the Sheetfed option from the neighboring pop-up menu.

24. Open the Fold Assistant and show the Fold Animation.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

25. The first fold is to be made upward in horizontal direction after the second page. For this purpose click the right arrow of page 2.

26. The second fold is made upward in vertical direction. For this purpose click the upper vertical arrow.

201

202

Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

27. The third fold is made upward in horizontal direction again. For this purpose click the bottom right arrow below page 2.

28. The folding rule is automatically created.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

29. Click Apply to apply the folding rule to the folding scheme.

30. Enable the First Page on Back option in Folding Scheme Editor and rotate the page head down in the Orientation of Top Page after Folding region.

31. Click Save and then the Close button.

32. The new folding scheme will be created in your group directory.

203

204

Chapter 12: Exercise 10 – Different press sheets in one job part – Print Media Academy

Imposing different sheet sizes in one job part 1.

2.

To create a new Signa job, choose File > New…

In the Job Assistant, enter the Job Code and the Job Name according to the task in the Job Data window.

Job code =

Job name =

0006

Complete HD flyer

3.

Load the customer data set of the Heidelberger Druckmaschinen AG customer from the customer data resource default directory.

4.

Click Next card to go to the Job Part Definition window.

6.

Enable the Imposition option.

5.

7.

Type the HD flyer designation in the Name text box.

Leave the values in the Start Conditions region at First Press Sheet = 1, First Folding Sheet = 1 and First Page = 1.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

8.

To do so, specify a value of 36 in the Number of Elements text box.

9.

Click Next card to go to the Master Pages window.

10. Our sample document was created with pages in the A4 format with 3mm bleed.

Leave the values for width 210, height 297 and bleed 3.0.

11. Click Next card to go to the Binding Methods window.

12. Choose the Saddlestitch option as the binding method.

205

206

Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

13. Enable the Creeping, Automatic (paper thickness) and Offset options and leave the value for Paper Thickness Factor at 1.0. Enable the Cut Marks, Folding Marks, Folding Crosses, Folding Sheet Label and Fold Lay Mark options.

14. Click Next card to go to the Printing Plates window.

15. For the cover choose the Plate Template named SM74_composite mark from your own group in the Resources.

16. Choose the work-and-turn option in the Placing Mode pop-up menu.

17. Specify 20 mm for separating gap.

18. Choose the Paper Format named Zanders_135_70x50 from the Training group.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

19. Disable the Autoposition Sujet option and type the value 30 mm in the Offset Baseline text box.

20. Click Next card to go to the Folding Schemes window.

21. For the cover choose the scheme named HD cover from your group directory.

207

208

Chapter 12: Exercise 10 – Different press sheets in one job part – Print Media Academy

22. This folding scheme would automatically create 9 folding sheets from 36 pages.

23. As the inner pages’ imposition differs from that of the cover, you must specify the number 1 in the Number Folding Sheets text box. The Unplaced Pages field indicates that 32 remain to be placed.

24. We now want to add the second plate template and the second scheme for the inner pages.

25. Click Back to go to the Printing Plates window.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

26. For the inner pages choose the Plate Template named XL105_composite mark from your own Plate Template group in the Resources.

27. Choose the Sheetwise option in the Placing Mode pop-up menu.

28. Choose the Paper Format named Profisilk_90_100x70 from the Training group.

29. Disable the Autoposition Sujet option and type the value 30 mm in the Offset Baseline text box.

30. Click Next card to go to the Folding Schemes window.

31. Now select the scheme for the inner pages.

209

210

Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

32. For the inner pages choose the scheme named HD inner pages from your group directory.

33. The selected scheme is automatically positioned on the first plate template in the Printing Plates window.

34. Choose the plate template named XL105_composite mark (Sheetwise (front and back)) from the Printing Plate shortcut menu to change the plate template.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

35. Specify 20 mm each for inner and top gutter.

36. Click Ready to create the new job.

37. Choose File > Save as... and save the job under the proposed name.

38. In the Graphics window, go to the Press Sheet List tab.

211

212

Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

39. All job part press sheets are shown here. The result should look as follows.

40. Import the HD_Stadt_dt_engl.pdf PDF document from the Signa_Training/Exercise10 directory.

41. Assign all pages of the document.

42. Save the changes and print the document.

Print Media Academy â&#x20AC;&#x201C; Chapter 12: Exercise 10 â&#x20AC;&#x201C; Different press sheets in one job part

43. The press sheet 3 front features a center spread. It would be feasible here to disable creeping.

44. Click page 18 in the Press Sheet graphics window and open the Page Inspector.

45. You can disable creeping for each page in the Page Inspector.

46. Click page 19 and disable creeping here as well.

47. Save the changes to the document and print it.

213

214

Chapter 12: Exercise 10 – Different press sheets in one job part – Print Media Academy

3D Reader’s Spread Visualization

The page assignment can be inspected in the Prinect Signa Station program using 3D reader’s spread visualization.

1.

Right-click the product part and select “3D Reader’s Spread Visualization”.

2.

Another window opens. Here you can let the pages turn using an animation or turn them manually.

Print Media Academy – Chapter 13: Exercise 11 – Special master pages and layers 215

Chapter 13: Exercise 11 – Special master pages and layers Task

As the fold-in page of a fanfold is shorter you will learn how to create special master pages and how to assign these to a folding scheme.

Our sample document is a flyer that is to be printed in several languages. For this purpose the images and texts in the different languages are saved in separate files. During this Prinect Signa Station exercise, you will learn how to work with several layers.

Job data: Job code: Job name Customer: Customer code: Number of layers:

Job part definition: Name: Page Total: Working mode:

Master pages: Page format: Special master page:

Binding Methods Binding method: Creeping: Print control elements: Printing plates: Printing plate: Placing mode: Paper definition:

Folding schemes: Scheme:

PDF document:

0007 6-pages Heidelberger Druckmaschinen AG 00001 3 Prominent 6 pages Imposition A4 with 3 mm bleed 207x297 mm with 3 mm bleed Leaflet Fold disable Cut and fold marks SM74 from the Training group Sheetwise Profisilk_90_70x50 from your own group F06-05_ui_3x1_P from your Standard Scheme directory

basis.pdf deu.pdf engl.pdf from /Signa_Training/Exercise11

216

Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers â&#x20AC;&#x201C; Print Media Academy

Surfaces:

Basic front and back sheet and German

Basic front back sheet and English

Print Media Academy – Chapter 13: Exercise 11 – Special master pages and layers 217

Sheet-PDF in Deutsch

Sheet-PDF in englisch

218

Chapter 13: Exercise 11 – Special master pages and layers – Print Media Academy

Exercise description

Preliminary considerations

A special master page must be created concurrently with the new job part. Pages 4 and 5 of the finished flyer fold in and therefore are by ca. 2 mm narrower than the other pages of the document.

The following illustration will explain this:

–

The red area represents the page bleed.

–

The blue area on pages 4 and 5 represent the area by which the fold in pages must be trimmed.

–

The gray areas represent the pages’ trim box

Special Master Pages

Front

Back

5 2

6 3

1 Special Master Pages

4

Our sample document is a flyer that is to be printed in several languages. For this purpose the images and texts in the different languages are saved in separate files. During this Prinect Signa Station exercise, you will learn how to work with several layers.

Print Media Academy – Chapter 13: Exercise 11 – Special master pages and layers 219

Creating a new Signa job with layers and special master pages 1.

2.

3.

4.

5.

To create a new Signa job, choose File > New…

In the Job Assistant, enter the Job Code and the Job Name according to the task in the Job Data window.

Job code = Job name =

0007 6-pages

Load the customer data set of the Heidelberger Druckmaschinen AG customer from the customer data resource default directory.

Our sample document consist of a PDF file containing the images and a file for each of the different language versions.

Specify a value of 3 in the Number of Layers text box.

6.

Click Next card to go to the Job Part Definition window.

8.

Enable the Imposition option.

7.

9.

Type the Signa flyer designation in the Name text box of the Job Part Definition window.

Let the values at the option Start Conditions First Press Sheet = 1, First Folding Sheet = 1 und First Page = 1.

220

Chapter 13: Exercise 11 – Special master pages and layers – Print Media Academy

10. Specify a value of 6 in the Page Total text box.

11. Click Next card to go to the Master Pages window.

12. Specify an A4 format with 3 mm bleed as the document’s page format.

13. To create the special master page disable the One Master Page Only option.

14. Enable the Special Master Page option and in the pop-up dialogue Cur.Type: Special.

Print Media Academy â&#x20AC;&#x201C; Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers 221

15. For this purpose click the black arrow

next to the Special Master Page option.

16. Type 207x297 for the special master page in the Name text box of the Create New Master Page window and click Apply.

17. Change the Width of the special master page to 207 mm.

18. Click Next card to go to the Binding Methods window.

222

Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers â&#x20AC;&#x201C; Print Media Academy

19. Choose the Binding Methods Leaflet Fold.

20. Enable the Cut Marks, and Fold Marks options.

21. Enable Max. Head Gap and Max.Gap in section Parameters for Automatic Gap computation.

22. Click Next card to go to the Printing Plate window.

23. Choose the Plate Template named SM74 from the Training group.

24. Choose the Sheetwise option in the Placing Mode pop-up menu.

25. Choose the Paper Format named Profisilk_90_70x50 from your own paper group.

26. Enable AutoPosition Sujet and Center Sujet in the Sujet Position on Paper section.

Print Media Academy â&#x20AC;&#x201C; Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers 223

27. Change the Paper Height to 400 mm.

28. Click Next card to go to the Folding Schemes window.

29. For the cover choose the scheme named F06-05_ui_3x1_P from the standard directory.

30. Now assign page 5 the special master page in the Folding Schemes window.

224

Chapter 13: Exercise 11 – Special master pages and layers – Print Media Academy

31. Click the right mouse button (Windows) or press the Ctrl key (Macintosh) and click the mouse on the page 5 icon and choose the Assign Master Page command.

32. Select the special master page in the pop-up menu in the Change Master Page window and click Apply.

33. It´s also possible to choose Special master pages ... in the same dialogue. Another window is opened where you can select your master pages.

Print Media Academy â&#x20AC;&#x201C; Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers 225

34. Pages assigned a special master page are marked with a green index number.

35. To complete, click Automatic Gaps to define the correct cutting block.

36. Click Ready to create the new job.

37. In the Job Inspector you can use the pop-up menu to view the layer names assigned in the Preferences.

226

Chapter 13: Exercise 11 – Special master pages and layers – Print Media Academy

38. The document is shown in the Press Sheet graphics window. The first layer is active by default.

To select a layer, click the icon for View properties in the bottom area of the Press Sheet window. In the Layers section of the View tab you can select the active layer.

39. Choose File > Save as... and save the job under the proposed name.

Assigning PDF documents to different layers

1.

2.

To import the documents, go to the Contents tab in the Browser window. There are three items according to the layer name..

Check the basic entry and choose Documents… from the shortcut menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers 227

3.

Import the basis.pdf document from the Signa_Training/Exercise11 directory.

4.

Now select the german entry in the Contents tab and import the deutsch.pdf document.

5.

Then select the english entry in the Contents tab and import the englisch.pdf document.

6.

As the documents were already assigned to the separate folders in the Contents tab, you can show all layers when loading the documents.

7.

The PDF document you laoded was created as an assembly area and not as separate pages. Assign page 5 on the press sheet to page 1 of the basis.pdf document.

10. Go to the back in the graphic window.

228

Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers â&#x20AC;&#x201C; Print Media Academy

11. Assign page 2 on the press sheet to page 2 of the basis.pdf document.

12. Like with the basic document, assign page 1 of the deutsch.pdf document to page 5 o fthe front sheet and page 2 of the same document to page 2 of the back sheet.

13. Then load the two pages of the englisch.pdf document in the same way.

14. Save the changes to the document.

Print Media Academy â&#x20AC;&#x201C; Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers 229

15. We must expand the trim size, because the PDF was saved as a complete montage.

Please choose Folding Sheet/Assembly Block in the Graphics view. Doubleclick page no. 5. The Page Inspector is opened automatically. The Bleed inputs must be Left: 3 mm and Right: 423 mm. The calculation of this value is: 210(p6) + 210(p1) + 3mm (bleed) = 423 mm.

16. Now you should have this layout at the Graphic Window.

230

Chapter 13: Exercise 11 â&#x20AC;&#x201C; Special master pages and layers â&#x20AC;&#x201C; Print Media Academy

17. After this we select page 2 and must do the inputs for the Back: Left: 3 mm, Right: 420 mm. The calculation of this value is: 210(p3) + 207(p4) + 3mm (bleed) = 420 mm

18. The changes at the pages are automatically for all layers.

19. Save the changes to the document.

20. To print choose File > Print Job.

21. Choose the Output Parameter Set SupraA74_SM74 from the Training group.

22. Enable the layers that are to appear on the same sheet in the Layer List region.

Print Media Academy – Chapter 14: Exercise 12 – Combination sheet

Chapter 14: Exercise 12 – Combination sheet Task

In this exercise you will learn how to create a Signa job where a press sheet contains an assembly block and two imposition schemes.

The job consists of one job part. The job part comprises a gang run form with 2 folding sheets and one assembly.

Product part: Combination sheet

Job data: Job number: Job Name: Customer:

Product Part Definition Title: Page total: Working Mode:

Master pages: Page format: Special master pages:

Binding Methods Binding methods: Creeping: Print control elements: Routing margin: Printing plates: Plate: Gang run form: Placing Mode: Paper definition:

Folding scheme: Scheme:

PDF document:

0008 Combination sheet Heidelberger Druckmaschinen AG Combination sheet 10 Imposition A4 with 3 mm trim A4landscape = 297x210 mm with 3 mm trim A5 = 148x210 mm with 3 mm trim Mixed Binding disable Cut and fold marks disable XL105_composite mark from your own group activate Sheetwise (front and back) Creato_200_100x70 from the Training group directory F04-01_ui_2x1 F02-01_ui_1x1

4c_Stundenplan.pdf 1c_Stundenplan_RS.pdf MaxiMalbuch_Cover.pdf MiniMalbuch_Cover.pdf from /Signa_Training/Uebung12

231

232

Chapter 14: Exercise 12 – Combination sheet – Print Media Academy

Completed forms: Front:

Back:

Print Media Academy – Chapter 14: Exercise 12 – Combination sheet

Exercise description

Product part: Combination sheet

1.

2.

To create a new Signa job, choose File > New…

In the Job Assistant, enter the Job Code and the Job Name according to the task in the Job Data window.

Job code = Job name = Customer =

3.

4.

0008 Combination sheet Heidelberger Druckmaschinen AG

Click Next card to go to the Job Part Definition window.

In the Name text box, enter the designation Combination sheet and enable the Imposition option in the Working Mode region.

In Page Total, type 10.

Select the first 4 pages and choose Change Page Names... from the shortcut menu.

Type U1 here. The following 3 selected pages are serially numbered.

233

234

Chapter 14: Exercise 12 â&#x20AC;&#x201C; Combination sheet â&#x20AC;&#x201C; Print Media Academy

5.

Name the next four pages C1-C4. Name the last two pages M1 and M2.

6.

Click Next card to go to the Master Pages window.

Print Media Academy â&#x20AC;&#x201C; Chapter 14: Exercise 12 â&#x20AC;&#x201C; Combination sheet

7.

Create the following special master pages: A4landscape: 297 mm x 210 mm A5: 148 mm x 210 mm

8.

Click Next card to go to the Binding Methods window.

235

236

Chapter 14: Exercise 12 â&#x20AC;&#x201C; Combination sheet â&#x20AC;&#x201C; Print Media Academy

9.

Choose the Mixed Binding option in the Binding Method pop-up menu. Enable the Cut Marks and Folding Mark options in the Automatic Placement of Print Control Elements section. Disable the Routing Edge.

10. Click Next card to go to the Printing Plates window.

11. Select the XL105_Combimark plate template from your folder of plate templates.

Enable the Gang Run Form option.

12. Choose the Turn (Front and Back Sheet) option in the Placing Mode pop-up menu.

13. Choose the Paper Format named Creato_200_100x70 from the Training group in the Resources.

Print Media Academy â&#x20AC;&#x201C; Chapter 14: Exercise 12 â&#x20AC;&#x201C; Combination sheet

14. Click Next card to go to the Folding Schemes window.

15. Load the F04-01 scheme twice and the F02-01 scheme once.

The first F04-01 scheme is the A4 cover requiring no changes. The second scheme is the A5 cover. To assign a different page format to the scheme, select the second scheme above and click Special Master Pages. A second window opens. here you can assign the special master pages created before. Select A5 in this case.

16. Now select the F02-01 scheme and assign the special master page A4landscape.

17. Now click Active Inspector Section next to the name. The Assign master pages from list dialog appears. Select All Folding Sheets here. You must create groups here to ensure correct page assignment later.

237

238

Chapter 14: Exercise 12 â&#x20AC;&#x201C; Combination sheet â&#x20AC;&#x201C; Print Media Academy

18. Right click on the first folding sheet and choose Create Group from the shortcut menu.

This will create 3 groups with one folding sheet each.

19. Now click Active Inspector Section next to the name again. Now select Press Sheet Layout.

20. Select the F02-01 folding sheet. Specify the following parameters: The existing folding scheme will be duplicated when 2 is specified in Number Folding Sheets.

Print Media Academy â&#x20AC;&#x201C; Chapter 14: Exercise 12 â&#x20AC;&#x201C; Combination sheet

20. Now select the first F04-01 folding sheet and specify the following values:

21. Now select the second F04-01 folding sheet and specify the following values:

22. Click Ready to create the press sheet.

239

240

Chapter 14: Exercise 12 â&#x20AC;&#x201C; Combination sheet â&#x20AC;&#x201C; Print Media Academy

23. Go to the Press Sheet Inspector and center the sujet horizontally.

Print Media Academy â&#x20AC;&#x201C; Chapter 14: Exercise 12 â&#x20AC;&#x201C; Combination sheet

24. Now the pages need to be loaded. To do so, load all PDF documents of the Signa_Training/Uebung12 folder.

25. Assign the pages the respective assembly block/folding sheet.

26. The Press Sheet graphic window should now look as follows.

27. Replace the color control bar for the back in the Press Sheet Inspector. Exchange the existing FOGRA_XL105_composite mark for the Color Control Bar_composite mark from the Color Control Bar group.

28. You should see the following result in the Press Sheet graphics window at the end of this exercise.

29. Save the changes to the document and print the sheet for verification.

241

242

Notes â&#x20AC;&#x201C; Print Media Academy

Print Media Academy – Chapter 16: Exercise 14 – Combination sheets

Chapter 15: Exercise 13 – Combination sheets (different schemes and jobs) Task

Before starting the job you will learn how to configure a platesetter with its plate templates.

You get an *.ipr of the suprasetter. Best is to work in this way: I.

Machines

1.Imagesetter / Platesetter

2. Sheetfed Presses / Web Presses

II. Resources

1. Output Parameter

2. Marks

3. PlateTemplates

In this exercise, you will learn how to create a Signajob for which different schemes for two different jobs are positioned on one press sheet.

The job in our example consists of four parts. Two job parts are created in the Montage working mode – each part contains a press sheet on which the schemes will be positioned later.

Each of the other two job parts contains an imposition scheme that will be positioned on the press sheet later.

239

240

Chapter 15: Exercise 13 – Combination sheets – Print Media Academy

Job part 1: Montage – press sheet 1

Job data: Job code: Job name: Customer:

Job Part Definition Title: Working mode:

Printing plates: Printing plate: Placing mode: Paper definition:

Assembly block: 1up size:

0009 Combination sheet Heidelberger Druckmaschinen AG Press_Sheet Montage SM102_composite mark from your own group SM74 from the Training group Sheetwise Creato_200_100x70 from the Training group directory for the second plate change size to 700x500 mm Undefined

Print Media Academy – Chapter 15: Exercise 13 – Combination sheets 241

Job part 2: Imposition – inner pages / maxi drawing book Job part definition Title: Page total: Working mode: Master pages: Page format:

Maxi drawing book – inner pages 16 Imposition A4 with 0 mm bleed

Trim Allowance for Pages: Outer: 20 mm Inner: 0 mm Top: 10 mm Bottom: 20 mm Binding method Binding method: Creeping: Print control elements: Printing plates: Printing plate: Placing mode: Paper definition:

Folding schemes: Scheme:

PDF document:

Saddlestitch disabled Cut and fold marks undefined undefined undefined F08-07_li_2x2

MaxiMalbuch_Inside.pdf

242

Chapter 15: Exercise 13 – Combination sheets – Print Media Academy

Job part 3: Imposition – inner pages / mini drawing book Job part definition Title: Page total: Working mode: Master pages: Page format:

Mini drawing book – inner pages 8 Imposition A5 with 0 mm bleed

Trim Allowance for Pages: Outer: 20 mm Inner: 0 mm Top: 10 mm Bottom: 20 mm Binding method Binding method: Creeping: Print control elements:

Printing plates: Printing plate: Placing mode: Paper definition:

Folding schemes: Scheme: PDF document:

Saddlestitch disabled Cut and fold marks undefined undefined undefined F08-07_li_2x2 (in 2ups) MiniMalbuch_Inside.pdf

Print Media Academy – Chapter 15: Exercise 13 – Combination sheets 243

Complete forms:

Press sheet 1 – front and back printing form:

Press sheet 2 – front and back printing form:

244

Chapter 15: Exercise 13 – Combination sheets – Print Media Academy

Exercise description

In the first step of this exercise, we will create all the job parts. In the second step, you will learn how to position schemes on the corresponding press sheet.

Job part 1: Montage – press sheet

1.

2.

Create a new Signa job by choosing File > New…

In the Job Assistant, enter the Job Code and the Job Name according to the task in the Job Data window.

Job code = Job name = Customer =

3.

0009 Combination sheet Heidelberger Druckmaschinen AG

Click Next card to go to the Job Part Definition window.

Print Media Academy â&#x20AC;&#x201C; Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets 245

4.

In the Name text box, enter Press_Sheet and enable the Montage option in the Working Mode region.

5.

Click Next card to go to the Printing Plate window.

6.

7.

8.

Select plate template SM102_composite mark from your directory of plate templates.

Choose the Sheetwise option in the Placing Mode pop-up menu.

Load the Paper Format named Creato_200_100x70 from the Training resource group.

246

Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets â&#x20AC;&#x201C; Print Media Academy

9.

Now select plate template SM74 from the Training directory of plate templates.

10. Choose the Sheetwise option in the Placing Mode pop-up menu.

11. Load the Paper Format named Creato_200_100x70 from the Training resource group.

12. Since the paper format is too large for the selected plate template, an information window opens.

13. Acknowledge the window by clicking OK and change the paper so that it has a width of 700 mm and a height of 500 mm.

14. Since no 1ups are required for this job part, click Ready to create the job part.

Print Media Academy – Chapter 15: Exercise 13 – Combination sheets 247

Job part 2: Imposition – inner pages / maxi drawing book 1.

To create the third job part, go to the Jobs tab in the Browser window.

3.

In the Job Part Definition window, enter the designation Maxi drawing book – inner pages in the Name text box, enable the Imposition option in the Working Mode region.

2.

Highlight the 0009_Combination sheet job in the list and choose New Job Part from the shortcut menu.

4.

Enter at the option Start Conditions for First Press Sheet 2, First Folding Sheet 2 and First Page 3 . Enter 16 pages in the Page Total text box.

5.

Click Next card to go to the Master Pages window.

248

Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets â&#x20AC;&#x201C; Print Media Academy

6.

7.

8.

Enter the following parameters: Width: 210 mm Bleed: 0 mm Trim Allowance for Pages: Outer: 20 mm Top: 10 mm

Height:

297 mm

Inner: Bottom:

0 mm 20 mm

Click Next card to go to the Binding Methods window.

Choose the Saddlestitch option in the Binding Method pop-up menu. Enable the Cut Marks and Folding Mark options in the Automatic Placement of Print Control Elements section.

Print Media Academy â&#x20AC;&#x201C; Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets 249

9.

Click Next card to go to the Printing Plates window.

10. Since the press plate and paper definitions of the first and second job parts are used for this job part, no entries are made in this window.

11. Click Next card to go to the Folding Schemes window.

12. Choose the F08-07_li_2x2 scheme from the default scheme resource directory.

13. Click Ready to create the job part.

250

Chapter 15: Exercise 13 – Combination sheets – Print Media Academy

Job part 3: Imposition – inner pages / mini drawing book 1.

To create the fourth job part, go to the Jobs tab in the Browser window.

3.

Aktivate the copy in the list Product Part and choose Edit Product Part from the shortcut menu.

4.

In the Job Part Definition window, enter the designation Mini drawing book – inner pages in the Name text box. enable the Imposition option in the Working Mode region and enter 8 pages in the Page Total text box.

2.

The third Jobpart is nearly the same as the second Jobpart so click to the second Jobpart in the list and choose Duplicate Product Part from the shortcut menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets 251

5.

Enter 8 pages in the Page Total text box. The number of pages are now different to the jobpart before. So you get these message.

6.

Acknowledge the window by clicking OK

7.

Click Next card to go to the Master Pages window.

252

Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets â&#x20AC;&#x201C; Print Media Academy

8.

Change the following parameters:

9.

Click Next card to go to the Binding Methods window.

Width:

148 mm

Height:

210 mm

10. In that window you don`t have to do any changes.

11. Click Next card to go to the Printing Plates window.

Print Media Academy â&#x20AC;&#x201C; Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets 253

12. Since the press plate and paper definitions of the first and second job parts are used for this job part, no entries are made in this window.

13. Click Next card to go to the Folding Schemes window.

14. In the option Unplaced Pages you see the value -8.

15. Change the number of schemes to 1.

254

Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets â&#x20AC;&#x201C; Print Media Academy

16. Click Ready to create the job part.

17. Choose File > Save as... to save the job under the proposed name.

18. At the end of this exercise, four job parts should be displayed in the Jobs tab in the Browser window.

Print Media Academy â&#x20AC;&#x201C; Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets 255

Positioning job parts 2 and 3 on Press_Sheet1

1.

Show the first press sheet by double-clicking job part Press_Sheet1 in the Jobs tab in the Browser Window.

2.

Since neither an assembly block nor a folding scheme has been assigned to this press sheet, only the marks and the subject are shown.

256

Chapter 15: Exercise 13 – Combination sheets – Print Media Academy

3.

In the Jobs Browser Window, show the folding sheets of the Maxi drawing book – inner pages job part and drag and drop the first folding sheet onto the press sheet.

4.

Open the Press Sheet Inspector by double-clicking the press sheet in the Press Sheet Graphics Window.

5.

Select the folding sheet on the press sheet or in the Assigned Folding Sheets/Assembly Blocks list and rotate it to 90°.

6. Save the changes in the job.

Print Media Academy – Chapter 15: Exercise 13 – Combination sheets 257

Position Job Part 3 (Mini drawing book) on Press Sheet 1 The mini drawing book is printed as a 2up 1.

In the Jobs Browser Window, show the folding sheets of the Mini drawing book – inner pages job part and drag and drop the first folding sheet onto the press sheet.

2.

Since this job part is to be printed as a 2up, drag the folding sheet onto the press sheet again.

258

Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets â&#x20AC;&#x201C; Print Media Academy

3. To position the folding sheets to eachother, choose the option Arrange folding sheets/assembly blocks by click to the shortcut menu of the Press Sheet Graphics Window.

4.

Set all margins to 0, deaktivatethe option Automatic rotation and click AutoArrange to arrange the folding sheets.

5.

The folding sheets get there positions about the Trim Allowance for Pages.

Print Media Academy â&#x20AC;&#x201C; Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets 259

6. To fit all marks and bleeds, choose the option Fit Marks and Bleeds by click to the short cut menu of the Press Sheet Graphics Window.

7. To better assess the positioning of the folding sheet on the press sheet, go to the Press Sheet tab in the Graphics Window and choose the Press Sheet Inspector. Click to the button Both Directions to center the folding sheets.

8. Save the changes in your document.

260

Chapter 15: Exercise 13 – Combination sheets – Print Media Academy

Positioning job part 2 (folding sheet 2 of maxi drawing book) on Press_Sheet2 1.

Show the second press sheet by double-clicking job part Press_Sheet in the Jobs tab in the Browser Window.

2.

In the Jobs Browser Window, show the folding sheets of the Maxi drawing book – inner pages job part and drag and drop the second folding sheet onto the press sheet.

3.

The folding sheet should now be centered on the paper. Open the Press Sheet Inspector and activate in the window the option Both Directions.

4.

For better control you should open the Press Sheet in the Graphics window. If you need to clip the color control strip you should Fit Marks and Trims.

Print Media Academy â&#x20AC;&#x201C; Notes

5.

Save the changes to the document.

7.

Save the changes to the document.

6.

If necessary fit Marks and Bleeds.

Assigning pages to the individual folding schemes

Since the press sheets were created in the Montage working mode, the command Add Pages using the shortcut menu in the Contents Browser Window or using the Not Assigned List Window cannot be used to assign the pages; when the Add Pages command is issued in Montage mode, a new assembly block is always created.

1.

Import all the documents from the Signa_Training/Uebung 14 directory.

2.

The pages of the MaxiMalbuch_Inside.pdf documents are to be assigned first.

4.

Then go to the Contents tab in the Browser Window.

3.

5.

Show the first press sheet by double-clicking job part Press_Sheet1 in the Jobs Browser Window.

Drag the folder of document MaxiMalbuch_Inside.pdf onto the first page of the associated folding sheet.

261

262

Chapter 15: Exercise 13 â&#x20AC;&#x201C; Combination sheets â&#x20AC;&#x201C; Print Media Academy

6.

Then drag the folder of document MiniMalbuch_Inside.pdf onto the first page of the associated folding sheet.

7.

Since a 2up is used here, each page is automatically assigned twice.

8.

9.

Save the changes and inspect both press sheets of the front and back printing form.

Then print both press sheets as PDFs and inspect the finished print files using Adobe Acrobat.

Print Media Academy – Chapter 16: Exercise 14 – Different press sheets in one job part

Chapter 16: Exercise 14 – Different press sheets in one job part Task

In this exercise we will process the cover and the inner pages of a 32-page flyer in the Imposition mode. As printing press and paper for the cover differ from the printing press and the paper used for the inner pages you will learn how to set up different parameters in one job part.

Job data: Job number: Job name Customer: Customer Code:

Job part definition: Name: Page total: Working Mode: Master pages: Page format:

Binding Methods Binding methods: Creeping: Print control elements: Defaults for automatic gap computation:

Printing plates: Plate: Placing Mode:

Separating Gap: Paper definition: Sujet Position on Paper Load plate and schemes: Folding schemes: Scheme:

PDF document:

0010 Cantate Heidelberger Druckmaschinen AG 00001 Brochure 32 pages Imposition A4 with 3 mm trim Special Master Page: 207 mm x 297 mm Saddlestitch activate Cut marks, folding marks, folding crosses, folding sheet label and fold lay mark enable: Max. head gap and Max. gap

SM102 from your own group folder Work-and-turn Sheetwise (front and back) 20 mm Creato_200_100x70 from the Training group AutoPosition Sujet, Center Sujet SM102_2x8S_A4_88x63 SM74_8S_A4_70x50 8S-Umschlag from your own Scheme group directory

Documents from /Signa_Training/Uebung14

267

268

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

Surfaces:

Press sheet 1: Work-and-tumble

Press sheet 2: Front and back printing

Press sheet 3: Front and back printing

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

Job part definition: Name: Page total: Working Mode: Master pages: Page format:

Binding Methods Binding methods: Print control elements:

Printing plates: Plate: Placing Mode: Press sheet layout: Paper definition: Sujet Position on Paper

Folding schemes: Scheme:

PDF document:

Completed Form:

Card 8 pages Imposition 68 mm x 170 mm with 3 mm trim Leaflet Fold Cut and fold marks SM52 from the Training group Sheetwise (front and back) 20 mm Zander_135_50x35 from the Training group AutoPosition Sujet, Center Sujet 8S-Umschlag from your own Scheme group directory

Documents from /Signa_Training/Uebung14

Press sheet 4: Front and back printing

269

270

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

Exercise description Create new scheme 1.

To create a new scheme click your custom group and choose New Scheme from the shortcut menu.

2.

The Folding Scheme Editor opens.

3.

Type the 8-up cover designation in the Name text box.

4.

Type 4 in the Matrix Columns and 1 in the Rows text boxes. Choose the Sheetfed option using the neighboring pop-up menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

5. The scheme is to be created on the basis of the folding rule. Click the the Folding Rule text box to open the Fold Assistant.

symbol next to

6.

The Fold Assistant opens. Show the fold animation by increasing the window height and then pulling the zoom in/zoom out tool upward.

7.

The first fold is made upward in horizontal direction. Click the icon in the bottom right corner of the folding scheme thumbnail view.

271

272

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

8.

The second fold is to be made downward in horizontal direction. Click the icon in the bottom right corner of the folding scheme thumbnail view.

9.

The third fold is made upward in horizontal direction. Click the icon in the bottom right corner of the folding scheme thumbnail view.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

10. Click Apply to apply the folding rule to the folding scheme.

11. Choose Leporello in the Pagination popup menu.

12. Since this is a scheme for a cover, you must decide upon the position the brochure content is to be inserted. There are two options: die Off-center Position or Insert at Index.

Insert at Index defines after which page number the content is to be inserted. Leave number 4 unchanged in or example.

13. Click Save and then the Close button.

14. The new folding scheme appears in your group directory.

273

274

Chapter 16: Exercise 14 – Different press sheets in one job part – Print Media Academy

Imposing different sheet sizes in one job part 1.

2.

3.

4.

5.

6.

7.

8.

9.

To create a new Signa job, choose File > New…

In the Job Assistant, enter the Job Code and the Job Name according to the task in the Job Data window.

Job code = Job name =

0010 Cantate

Load the customer data set of the Heidelberger Druckmaschinen AG customer from the customer data resource default directory.

Click Next card to go to the Job Part Definition window.

Type the Brochure designation in the Name text box.

Enable the Imposition option.

Leave the values in the Start Conditions region at First Press Sheet = 1, First Folding Sheet = 1 and First Page = 1.

To do so, specify a value of 32 in the Page Total text box.

Click Next card to go to the Master Pages window.

10. Our sample document was created with pages in the A4 format with 3 mm bleed. Leave the values for width 210, height 297 and bleed 3.0. Create an additional special master page: 207x297: 207 mm x 297 mm

11. Click Next card to go to the Binding Methods window.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

12. Choose the Saddlestitch option as the binding method.

13. Enable the Creeping, Automatic (paper thickness) and Offset options and leave the value for Paper Thickness Factor at 1.0. Enable the Cut Marks, Fold Marks, Folding Crosses, Folding Sheet Label and Fold Lay Mark options. Enable Max. Head Gap and Max. Gap Width.

14. Click Continue to go to the Printing Plate window.

15. Choose the Plate Template named SM102_Combimark from your own group in the Resources for the cover.

16. Choose the Work-and-tumble option in the Placing Mode pop-up menu.Specify a gap of 20 mm.

17. Choose the Paper Format named Creato_200_100x70 from the Training group in the Resources.

275

276

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

18. Enable the AutoPosition Sujet and Center Sujet options.

19. You can save separate press sheets in a product part template and load it into a job when necessary to prevent having to start from scratch each time. To load a press sheet, click the icon next to Load Plates and Schemes from Product Part Template. A new window opens where you can load product part templates created as gang run form. Select the SM102_2x8S_A4_88x63 template in the Training folder and confirm with OK.

The positioned scheme is loaded along with the plate. Make sure to assign a unique name to the template since you will only see the contents of the first sheet. A product part template could, however, contain several sheets.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

20. Click the icon next to Load Plates and Schemes from Product Part Template again and import the SM74_8S_A4_70x50 product part template.

21. The result should be as follows.

277

278

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

22. Replace the plate templates on the gang run forms with the ones you just created.

23. Click Next card to go to the Folding Schemes window.

24. The product parts automatically loaded the positioned schemes. Now there are 8 unpositioned pages of the cover left. Choose the scheme named 8-up cover from your group directory for the cover.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

25. Click Automatic Gaps once for the cover. In this case PrinectSignaStation will not detect a Leporello fold. Type 0 in the entire top column.

279

280

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

26. As the scheme for the cover was added last it is now at position 4. Right click the folding sheet and drag it to position 1.

27. Now assign special master page 207x297 to pages 2 and 7.

28. Click Ready to create the new job.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

28. Choose File > Save as... and save the job under the proposed name.

29. In the Graphics window, go to the Press Sheet List tab.

30. All job part press sheets are shown here. You can set the view size with percentage values. The result should look as follows.

281

282

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

Unproportionally scaling marks and clipping color control bars

1.

The second press sheet is printed at one go. It is important for production reasons to cover the color control bar in the sheet middle. This is done with the Clip Marks function.

2.

Double click press sheet 2 in the browser window. The graphic window will automatically show the front sheet. Use the magnifying glass to zoo into the following section.

3.

Select the color control bar in the graphic window and then click the Path tool.

4.

To add points to the path, hold the Ctrl key pressed. Add 4 points.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

5.

Clip the color control bar so that the middle does not contain any color. The result should be as follows.

6.

Apply the clipped color control bar to the back. The clipped mark is highlighted with a blue frame.

7.

The register crosses are too large for the selected small paper format. You can reduce the mark size unproportionally here. To do so, select the Arc in the Press Sheet Inspector.

8.

Click the

icon to disable proportional scaling.

283

284

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

9.

Type 25% for Scale X and 50% for Scale Y.

10. Scale the other 3 Arc marks as well.

11. Select all 4 Arc marks on the front and copy them to the back.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

Loading default formats for the trimbox

1.

Import the PDF documents from the Signa_Training/Exercise14 folder.

2.

Check the documents with the Document Inspector.

3.

The trimbox for the cover does not have the correct size and is off center. You can now manually specify values or click the icon to load default formats.

4.

A new window opens. Select A4 in the Standard folder. Click OK. The values are applied.

285

286

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

5.

Click all in Apply to. The changes apply to the entire PDF document.

6.

The trim box is always centered in relation to the media box. The result should be as follows.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

Assigning pages and inserting blank pages 1.

Assign the first page of the cover to page 1 on the cover press sheet.

2.

Now assign page 1 of the Klappseiten-Cantate.pdf document to the placeholder of page 2.

287

288

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

3.

Select the Cantate_24S.pdf document, drag the entire PDF into the Page List and drop it on the placeholder for page 3.

All pages in the PDF will now be inserted into the job, starting at page 3.

4.

Select the still unassigned pages of the cover and the fold-out page. The pages will be inserted into the next free placeholder.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

5.

The result should be as follows.

6.

2 pages of the cover are still lacking contents so 2 pages are missing in our example.

You have the option to add blank pages. To do so, go to the Page list in the graphic window. Right click the placeholder where a blank page is to be inserted. Choose Assign Blank page in the shortcut menu.

289

290

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

7.

Repeat the last step on placeholder 30.

The result should be as follows.

8.

The blank pages you inserted will move the subsequent pages to the rear. Pages already assigned could then lose their assignment. The empty pages suppress any warning regarding free placeholders during output.

9.

Save the job.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

Duplicating pages in the imposition mode 1.

Create a new product part.

3.

Enable the Imposition option.

2.

4.

Type the Card designation in the Name text box.

Leave the values in the Start Conditions region at First Press Sheet = 4, First Folding Sheet = 1 and First Page = 1.

5.

To do so, specify a value of 8 in the Page Total text box.

7.

Specify the following parameters.

68 mm x 170 mm 3 mm bleed

8.

Click Next card to go to the Binding Methods window.

6.

9.

Click Next card to go to the Master Pages window.

Choose the Leaflet Fold option as the binding method.

10. Enable the Cut Marks, and Fold Marks options.

11. Click Continue to go to the Printing Plate window.

12. Choose the Plate Template named SM52 from the Training group in the Resources.

13. Choose the Turn front and back option in the Placing Mode pop-up menu.

291

292

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

14.Choose the Paper Format named Zanders_135_50x35 from the Training group in the Resources.

15. Enable the AutoPosition Sujet and Center Sujet options.

16. Click Next card to go to the Folding Schemes window.

17. Select the Scheme named 8-up cover from you own group in the Resources. Click Press sheet layout in the popup menu.

18. Specify a value of 20 for the Press sheet layout (plate). A 20 mm gap is inserted between the 2 folding sheets.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

19. Click Ready to create the job part.

20. Go to the Contents tab in the browser window and double click the first page of the PDF document Karte_Cantate.pdf. The graphic window displays the page in the document window. The document window that the trimbox is not in place. Click Rel. Position X. You can now move the trimbox with the arrow keys on the keyboard under visual control.

293

294

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

21. You can drag magnetic snap lines from the ruler for a better overview.

22. Now go back to the Contents browser window and right click page 1 of Karte_Cantate.pdf. Choose Copy Pages to Clipboard from the shortcut menu.

Print Media Academy â&#x20AC;&#x201C; Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part

23. Go to the Press Sheet graphic window and right click on the press sheet. Choose Paste Pages from Clipboard from the shortcut menu.

24. The result should be as follows.

25. Repeat the last two steps for the second page of the document and paste the page on the back sheet.

295

296

Chapter 16: Exercise 14 â&#x20AC;&#x201C; Different press sheets in one job part â&#x20AC;&#x201C; Print Media Academy

26. You must assign the PullLay mark another color since there is no black separation of our file. A new color was introduced for lineart marks since you do not always know the colors contained in the job. This is the DarkColor. When you select it, the respective mark will be assigned to the darkest color and printed in this color. Apply this color to the PullLay mark. Copy the changes to the back as well.

27. Save the changes to your job and output it as PDF.

Print Media Academy – Chapter 17: Exercise 15 – Plate layout template

Chapter 17: Exercise 15 – Creating and applying a plate layout template Task

In this exercise we will impose a 20-page drawing book with a CMYK cover and monochrome black inner pages. The cover will be printed as a 4up since the entire job is to be printed on one press. For the inner pages, four folding sheets are to be positioned on one press sheet.

In the first step you will create a plate layout data set in the resources that defines the offsets between the separate folding sheets, the fold lay mark and the orientation of the folding sheets on the press sheet.

Plate layout: Name: Folding sheet rows: Folding sheet columns Folding sheet orientation: Gaps: Fold lay:

Job data: Job code: Job name Customer:

Product part definition: Name: Working Mode: Page Total: Master pages: Page format:

Printing plates: Printing plate: Placing Mode: Paper definition:

2x2_head top 2 2 disabled Horizontally and vertically: 40 mm each swap by 180° 0011 Children’s painting book Heidelberger Druckmaschinen AG Oscar Imposition 20 A4 with 3 mm bleed SM102_composite mark from your own group Turn (front and back sheet) Creato_200_100x70 from the Training group

Folding Schemes Scheme:

F04-01_ui_2x1

Output parameter set:

SM102 from the Training group

PDF document:

MaxiMalbuch_Cover.pdf and MaxiMalbuch_Inside.pdf

293

294

Chapter 17: Exercise 15 – Plate layout template – Print Media Academy

Completed forms

Press sheet 1: Front/Back printing

Press sheet 2: Front/Back printing

Print Media Academy â&#x20AC;&#x201C; Chapter 17: Exercise 15 â&#x20AC;&#x201C; Plate layout template

Exercise description

Creating a plate layout parameter set

In this exercise step you will create a new plate layout parameter set.

1.

Select Jobs & Resources > Resources & Machines in the menu to go to the Resources tab in the Browser window.

2.

Click the gray arrow to show the contents of the Plate Layouts group.

4.

The folder for the new group is created in the folder tree. Type your own name as the group name.

3.

5.

Create a new group. To do so click the Plate Layouts item and choose New Group from the shortcut menu.

To create a new plate layout, click the group you just created and choose New Plate Layout from the shortcut menu.

295

296

Chapter 17: Exercise 15 â&#x20AC;&#x201C; Plate layout template â&#x20AC;&#x201C; Print Media Academy

6.

The Plate Layout Editor automatically opens.

7.

Type the 2x2_head top designation in the Name text box.

9.

Specify 40 mm in the text box as the horizontal and vertical offset between the separate folding sheets.

8.

Specify a value of 2 each in the Folding Sheet Rows and Folding Sheet Columns text boxes.

Print Media Academy – Chapter 17: Exercise 15 – Plate layout template

Each of the squares represents one folding sheet, regardless of the number of pages it comprises.

The front is identified by the color yellow, the back by green.

10. Now change the fold lay for each of the folding sheets by 180°. For this purpose click the icon of each folding sheet. The red line indicates the fold lay.

11. To save the plate layout, click Save and then the Close button.

297

298

Chapter 17: Exercise 15 – Plate layout template – Print Media Academy

12. The new plate layout you have created appears in your group folder.

Creating a Signa job 1.

2.

3.

4.

To create a new Signa job, choose File > New….

In the Job Assistant, enter the Job Code and the Job Name according to the task in the Job Data window.

Load the customer data set as per the task.

Click Next card to go to the Product Part Definition window.

Print Media Academy â&#x20AC;&#x201C; Chapter 17: Exercise 15 â&#x20AC;&#x201C; Plate layout template

5.

In the Name text box, enter the designation Oscar, enable the Imposition option and specify 20 in the Page Total region.

6.

Click Next card to go to the Master Pages window.

7.

Define a width of 210 mm and a height of 297 mm for the master page. Leave the bleed at 3 mm.

8.

Click Next card to go to the Binding Methods window.

9.

Choose the Saddlestitch option in the Binding Method pop-up menu.

299

300

Chapter 17: Exercise 15 â&#x20AC;&#x201C; Plate layout template â&#x20AC;&#x201C; Print Media Academy

10. Enable the Cut Marks, Folding Marks, Folding Sheet Label and Fold Lay Mark options in the Automatic Placement of Print Control Elements section.

11. Click Next card to go to the Printing Plates window.

12. Select the SM102_composite mark plate template from your own group folder.

13. Choose the Sheetwise (Front and Back Sheet) option in the Placing Mode pop-up menu.

14. Choose the paper format named Creato_200_100x70 from the Training group.

15. Click Next card to go to the Folding Schemes window.

Print Media Academy â&#x20AC;&#x201C; Chapter 17: Exercise 15 â&#x20AC;&#x201C; Plate layout template

16. Load the F04-01_ui_2x1 scheme from the default scheme resource folder.

17. As the first press sheet is to contain the first folding sheet only, you must change the number of folding sheets to 1.

18. Load the F04-01_ui_2x1 scheme again.

19. Highlight the first folding sheet in the list.

301

302

Chapter 17: Exercise 15 – Plate layout template – Print Media Academy

20. Choose the Press Sheet Layout option from the Active Inspector Section popup menu.

21. Click the icon next to the Plate Layout Area option and load the plate layout created earlier in this exercise from your group folder.

Print Media Academy â&#x20AC;&#x201C; Chapter 17: Exercise 15 â&#x20AC;&#x201C; Plate layout template

22. The folding sheets of the first press sheet are automatically rotated and arranged as per the plate layout.

23. Then highlight the next folding sheet in the list.

24. Disable the Folding Sheet Copies Allowed option.

25. Load the plate layout you created from your group folder.

303

304

Chapter 17: Exercise 15 â&#x20AC;&#x201C; Plate layout template â&#x20AC;&#x201C; Print Media Academy

26. Click Ready to create the new job.

27. The Press Sheet graphics window should now show the following result.

28. Choose File > Save as... and save the job under the proposed name.

29. Import all documents of the Signa_Training/Exercise15 folder.

30. Assign all pages in the correct sequence.

Please note when assigning pages that the MaxiMalbuch_Cover.pdf document contains the two first and two last pages.

31. Save the changes to the document and print it.

Print Media Academy – Chapter 18: Exercise 16 – SM74DI 305

Chapter 18: Exercise 16 – SM74DI Task

In this exercise you will create a plate template for an SM74DI. The platesetter (SM74DI) must be manually created since there is no *.ipr file. Following this, you will create appropriate output parameters and plate templates.

Press

SM74DI

Plate

Leading Gripper edge of print

745 x 605

59.5

10

Max. paper 740 x 530

Max. Number Width Tail Lat. of of printing edge of distance ink ink format print zones zones 740 x 510

32.5

35.5

2.5

Imagesetters

Press

Plate size

Imaging window

Y offset

SM74DI

SM74DI

745 x 605

740 x 510

59.5

Feasible order for creating machines and resources I.

23

Machines

1. Filmsetters/platesetters

2. Sheetfed press/web press

II. Resources

1. Output parameter 2. Marks

3. Plate templates

306 Notes â&#x20AC;&#x201C; Print Media Academy

Print Media Academy â&#x20AC;&#x201C; Appendix

Appendix Data sheet: Platesetters Imagesetter

Press:

Plate size

Imaging Window

Topsetter102 PF

SM102 / CD102

1030 x 790

1030 x 766

745 x 660

745 x 636

745 x 605

745 x 581

SM52

525 x 459

525 x 434

CD74F

745 x 660

745 x 630

745 x 605

745 x 575

SM52

525 x 459

525 x 429

SM102 / CD102

1030 x 790

1030 x 790

745 x 660

745 x 660

745 x 605

745 x 605

SM52

525 x 459

525 x 459

SM74 / CD74C

745 x 605

745 x 605

SM52

525 x 459

525 x 459

QM46

340 x 505

340 x 495

SM102 / CD102

1030 x 790

1030 x 790

745 x 660

745 x 660

745 x 605

745 x 605

525 x 459

525 x 459

510 x 400

510 x 400

340 x 505

340 x 505

Topsetter102 PF Topsetter102 PF Topsetter102 PF Topsetter74 Topsetter74 Topsetter74 Prosetter102 Prosetter102 Prosetter102 Prosetter102 Topsetter74 Topsetter74 Polysetter Suprasetter 105

Suprasetter 74 + 105 Suprasetter 74 + 105 Suprasetter 74 + 105 Suprasetter 74 + 105 Suprasetter 74 + 105

CD74F SM74 / CD74C

SM74 / CD74C

CD74F SM74 / CD74C

CD74F SM74 / CD74C SM52 GTO QM46

307

308

Appendix â&#x20AC;&#x201C; Print Media Academy

Data Sheet: Sheetfed Presses Press

Plate

GTO46

450 x 370

35

8 - 10

460 x 330

445 x 310

16

32.5

25

2.5

GTO52

510 x 400

35

8 - 10

520 x 360

505 x 340

16

32.5

25

2.5

SM52

525 x 459

58

8 - 10

520 x 370

520 x 360

16

32.5

41

2.5

MO

650 x 550

47.6

8 - 10

650 x 480

645 x 472

23

32.5

30.4

2.5

745 x 605

59.5

8 - 10

740 x 530

740 x 512

23

32.5

33.5

2.5

745 x 660

43

8 - 10

740 x 610

740 x 585

23

32.5

32

2.5

1030 x 790

43

10 - 12

1020 x 720 1020 x 710

32

32.5

37

5

1030 x 790

52

10 - 12

1020 x 720 1020 x 710

32

32.5

28

5

SM74 / CD74C CD74F

SM102/ 43x37 SM102/ 52x28

Data Sheet: Papers Paper name

Leading Gripper edge of print

Max. paper

Max. Number Width Tail Lat. printing Ink ink Edge of distance format zones zones Print

Grammage

Volume

Thickness 0.07 mm

matt art printing

Profisilk

90 g/m2

1

0.08 mm

matt art printing

Profisilk

115 g/m2

1

0.1 mm

matt art printing

Profisilk

135 g/m2

1

0.11 mm

matt art printing

Profisilk

170 g/m2

1

0.15 mm

matt art printing

Zanders

135 g/m2

1

0.11 mm

glossy art printing

Zanders

170 g/m2

1

0.15 mm

glossy art printing

Zanders

250 g/m2

1

0.22 mm

glossy art printing

Creato postcard cardboard

200 g/m2

1

0.18 mm

matt coated

Profigloss

90 g/m2

1

0.07 mm

glossy art printing

Profigloss

115 g/m2

1

0.08 mm

glossy art printing

Profisilk

80 g/m2

1

Grade

Print Media Academy â&#x20AC;&#x201C; Appendix

Plate template element

1

7

2

4 3 5

4

Autoregister

1 CPC bar (DIPCO 1.4) Reference Point: Upper middle Parent: Subject There should be a margin of at least 5 mm paper white on every page between the control bar end and the sheet edge.

2 Registration marks Parent: Subject 3 Autoregister There should be a margin of 10 mm paper white between the AR mark and the slugline.

6

8

PullLay 80 mm

4 Slugline 5 PullLay 6 PKS control bar Reference Point: Lower middle Parent: Plate 12F mark = CMYK + Spot BW mark = Black/white CMYK mark = CMYK 7 Blue dotted line marks the maximum exposure area 8 The red area marks the critical area

309

310

Appendix â&#x20AC;&#x201C; Print Media Academy

Feasible order for creating machines and resources I.

Machines

1. Filmsetters/Platesetters

2. Sheetfed press/Web press

II. Resources

1. Output parameters 2. Marks

3. Plate template 4. Papers

5. Schemes

6. Plate layout

7. Customer data

8. Report headers

Print Media Academy â&#x20AC;&#x201C; Appendix

Machines/resources and Signa job dependencies

311

312

Appendix â&#x20AC;&#x201C; Print Media Academy

Preferences

This section gives an overview of the possible Prinect Signa Station preferences. The Preferences area lets you define default folders and make general settings applicable to program operation. There are eight tabs where you can make settings: General, Paths, Names, Defaults, Resources, Import, Processes and Option Chooser. For further information please refer to the Prinect SignaStation Reference Manual.

1.

To open the Preferences select File > Preferences...

Preferences â&#x20AC;&#x201C; General

The General tab lets you set the view attributes, the interface language, the parameters for automatic file names, and the default user. You can also permanently hide or show the messages again. Prinect Signa Station will start without login window using the specified default user if you enable the Default User option.

Enable the Show Units checkbox to have every value followed by the selected unit .

Print Media Academy â&#x20AC;&#x201C; Appendix

Disable this checkbox when you do not wish to see units in the text boxes. You can verify and, if necessary, also change the unit by way of the toolbar.

Use the Default unit of measure popup menu to define the unit used throughout the program. You can, however, always change the selected default unit in individual text boxes by manually typing the appropriate unit abbreviation.

The Cutting Die option appears in the Job Inspectorâ&#x20AC;&#x2122;s Colors tab if you enable the Column for cutting die color option. When you enable this option for a certain color, it will be treated like the ProofColor during output.

Use the Display color popup menu to define the colors used for identifying folding schemes/assembly blocks, paper, printing plate and the critical area. The critical area is the printing plate part where ink cannot yet be applied.

1.

To change the display colors, choose the desired option in the Display color popup menu.

2.

Then click the

icon next the Display color popup menu.

313

314

Appendix â&#x20AC;&#x201C; Print Media Academy

3.

Adjust the desired color with the color sliders, or type values directly in the text boxes.

The selected color appears in the Current color area.

4.

Click OK to apply the selected color.

Click the Reset button to return to the previous color.

Click the Default button to show the default settings.

Click the Cancel button to cancel the changes to the color settings.

You can enable or disable the file naming options that are to be automatically applied when a Signa job is saved in the Parameters for Automatic File Names section.

Usage of the folding sheet animation depends on the graphics adapter in the PC where Prinect Signa Station was installed. Disable the Use hardware support in folding sheet animation option if your graphics adapter does not support the folding sheet animation.

Preferences â&#x20AC;&#x201C; Paths

You must define the default paths for saving resources, jobs (assemblies), temporary folders, and PDF documents when you start the Prinect SignaStation application the first time.

You can also define a default folder for your output files here.

Use the Paths tab to change default folders at a later time. When a company operates several Prinect SignaStation work stations, you should set up the folders on a server and specify these folders so all work stations can use the same resources. This facilitates the standardization of jobs and helps prevent errors.

Print Media Academy â&#x20AC;&#x201C; Appendix

default folders under Windows: Path to the workspace:

Path to jobs:

Path to contents:

Path to output:

Path to CAD files: MacOS X default folders:

Path to the workspace:

Path to jobs:

Path to contents:

Path to output:

Path to CAD files:

C:\Documents and Settings\All Users\Application Data\Heidelberger\PrinectSignaStation_3\tmp C:\Documents and Settings\All Users\Application Data\Heidelberger\PrinectSignaStation_3\SignaJobs C:\Documents and Settings\All Users\Application Data\Heidelberger\PrinectSignaStation_3\pdfdocuments C:\Documents and Settings\All Users\Application Data\Heidelberger\PrinectSignaStation_3\Output C:\Documents and Settings\All Users\Application Data\Heidelberger\PrinectSignaStation_3\Packaging-CAD

Start volume\Users\Shared\Heidelberg\ PrinectSignaStation_3 Start volume\Users\Shared\Heidelberg\ PrinectSignaStation_3\SignaJobs Start volume\Users\Shared\Heidelberg\ PrinectSignaStation_3\pdfdocuments Start volume\Users\Shared\Heidelberg\ PrinectSignaStation_3\Output Start volume\Users\Shared\Heidelberg\ PrinectSignaStation_3\Packaging-CAD

315

316

Appendix – Print Media Academy

1.

Click the

2.

Browse to the folder you wish to select and click the Apply button.

3.

icon to change the path to a default folder.

The selected folder appears in the Preferences Paths tab.

Prinect Signa Station uses PDF files and Delta lists. To process PostScript files – without first converting them to PDF – you must assign the Acrobat Distiller application by specifying the Path to Acrobat-Distiller in the Select External Executables area. When you select PostScript documents for imposition, they will be automatically converted to PDF using the application’s Distiller settings and loaded.

Specify the application for viewing PDF documents in the Path to Acrobat Reader area. This will allow you to open pages in the selected Reader from within the application. You can make late-breaking corrections when the selected viewer is Acrobat Professional.

Preferences – Names

You can use several layers in Prinect Signa Station. In some cases this is necessary if you wish to position different PDF documents on different layers. In addition, you can, for example, process multilingual documents in one job. One document can hold up to 12 layers.

The Names tab lets you freely name layers – for a better overview when you later assign documents to separate layers.

Print Media Academy â&#x20AC;&#x201C; Appendix

1.

To change the name of a layer, click the Name text box.

2.

Enter the desired name. Use the Tab key to go to the next text box.

In the Surface Names region of the Names window you can accept the proposed names for the sheet offset or web offset surfaces or assign custom names.

You can define the contents of marks variables Replacer 1 to Replacer 15 in the Free Text Replacer Names table.

317

318

Appendix – Print Media Academy

Preferences – Defaults

In the Defaults tab you can specify defaults for Bleed, Routing Margin Min., Routing Margin Max., Max. Head Gap and Max. Gap . These values are automatically imported when you create a file if the respective option is enabled. You can always edit these values in the job.

We recommend that you enable the Scheme filter option if you wish to only view possible variants in dependence of paper and single page size when selecting an imposition scheme.

One Folding Sheet per Sheet defines that exactly one folding sheet will appear on each press sheet. 2ups, however, are still possible when this option is enabled. You can use the arrow keys on your keyboard to, for example, move assembly blocks. The cut marks will move according to the creeping values if creeping is enabled. Enable Fixed Cut Marks in Creeping if the cut marks are to remain at their original page position.You can change the folding sheet sequence in a Signa job because of pagination while the press sheet sequence changes analogously. Enable the Constant Press Sheet Order option if you wish the press sheet order to remain unchanged.It may not always be feasible to apply placement rules and marks to all job pages. Changes will apply to the pages of the currently selected folding sheet/assembly block only when you enable the Restrict ‘Apply’ functions in Page Inspector option.

In this window you can define the increment of the unit you selected and the ProofColor line thickness. The ProofColor will be printed up to the folding sheet edge and not on the paper when you enable the Lines till folding sheet edges option.

The Custom Screen Angles for Other RIPs section lets you define screen angles for CMYK and spot color output.

Print Media Academy â&#x20AC;&#x201C; Appendix

Preferences â&#x20AC;&#x201C; Resources

You can set your own marks for those marks Prinect Signa Station assigns automatically in the Resources tab. The marks must be available in the Marks Resources. Here you can also select the Barcode Font being accessed in the Marks Editor.

1.

2.

3.

Click the icon next to the marks type to be changed if you wish to assign a mark from another resource folder.

Highlight the marks set containing the desired mark in the Choose Mark window. Click the small triangle to view the set contents.

Highlight the desired mark and click OK.

319

320

Appendix – Print Media Academy

Use the popup menu in the Default for Other Resources section to select a product part template from the resources you want to use for the product part user’s spread. The product part used in the template must have been created in the Autom. Imposition mode. To create the reader’s spread of a product part, go to the Jobs tab in the Browser window. Highlight the desired product part there and select Product Part in Reader’s Spread from the shortcut menu.

You can save a list in the HTML format from the Lists window. Choosing the Report header option lets you load a template from the Report header resources.

Print Media Academy â&#x20AC;&#x201C; Appendix

Preferences â&#x20AC;&#x201C; Import

In the Import tab you can specify that the JDF Connector automatically starts, and you can define the input and output folders for JDF documents. You can define an output parameter set for JDF output in the Resources Default for JDFs with Job Prep Data section. The folders for Default Groups for Imports (JDF / Signa 9 Template) of Plate Templates or Schemes will be searched first for a suitable plate template or scheme. You can also define Automatic Gaps with JDF Import here. The MDS section lets you enable the use of MDS and specify the MDS server address. This option is available in conjunction with Prinect Print Ready and MetaDimension only.

321

322

Appendix â&#x20AC;&#x201C; Print Media Academy

Preferences â&#x20AC;&#x201C; Processes

Define attributes applicable to loading of PDF files in the Processes tab. You can specify that loading PDF documents automatically results in a Preview (72 dpi) or a Hires Preview (144 dpi). The One Page per Color in Separated PDF function causes each color separation of a separated PDF document to be assigned a logical page. Page thumbnails embedded in a PDF document can be used for display in Prinect Signa Station when you enable the Use Thumbnails for Preview option. You can also define attributes for HTML report creation and specify that the output dialog is to close automatically.

Print Media Academy â&#x20AC;&#x201C; Appendix

Preferences â&#x20AC;&#x201C; Option Chooser

In the Option Chooser tab you select the basic packages and options for the Prinect Signa Station application. Here you specify the License Server name or IP address. You can use the Refresh Connection option to verify if there is a connection to the License Server or refresh the connection if it was interrupted. Changes made to any licenses will take effect after a program restart only.

Click the Reset button to reset the values on the respective Preferences tab to the last saved values. Click the Cancel button to reject any changes made in any of the tabs. Click Save to adopt the changes made in any of the tabs.

323

324

Appendix – Print Media Academy

Prinect Signa Station Backup

To completely restore the SignaStation environment after a new installation, the following folders need to be backed up. The workspace holds all resources. The Preferences folder holds all settings such as Unit of Measurement, Colors, etc. The respective folders are subfolders of PC:

Workspace default folder: C:\Documents and Settings\All Users\Application Data\Heidelberger\PrinectSignaStation_3\ Preferences default folder: C:\Documents and Settings\“User”\Application Data\Heidelberg\PrinectSignaStation_3 Mac:

Workspace default folder: Hard disk -> Users -> Shared -> Heidelberg -> PrinectSignaStation_3 Preferences default folder: Hard disk -> Users -> “User” -> Heidelberg -> PrinectSignaStation_3

Print Media Academy – Appendix

Prinect Signa Station 3 definitions Plate template

Signajob (*.sdf) Template

Templates in plate size in containing all marks relevant for printing and imaging. The marks as such are dynamic in Prinect Signa Station, i.e. they are related to the sujet, the paper or the plate. The mark position changes as soon as a parameter changes!

like a plate template + scheme or assembly block + contents (PDF documents). A Signa job can comprise several product parts.

like a Signa job but without contents (PDF documents). A template can comprise several product parts.

Prinect Signa Station

Signastation 9

Signajob (*.sdf = Signa Data Format)

Signature + plate template

Plate template

Original

Combination of template and plate template but without scheme or assembly block Signature + plate template but without contents (PDF documents)

Prinect Signa Station key shortcuts

Zoom in specific graphics window area: Ctrl + space bar + left mouse button

Zoom out specific graphics window area: Ctrl + space bar + Alt + left mouse button Enlarge graphics window: Ctrl + “+”

Reduce graphics window to full page (auto function): Ctrl + “-”

Hand pointer to pan section in the graphics window: Space bar

continue in the Job Assistant (1 step): Ctrl + space bar

go back in the Job Assistant (1 step): Ctrl + Shift + space bar

Mac users must press the Command key on the Mac keyboard instead of the Ctrl key.

The Help menu provide a complete list of all key shortcuts. To call up Help, either press the F1 key or click the ? in the menu bar.

325

326

Appendix â&#x20AC;&#x201C; Print Media Academy

Marks handling - hotspot - reference point

Each mark features one hotspot. The hotspot describes a markâ&#x20AC;&#x2122;s zero point. All in all there are 9 different hotspots (see the drawing).

Sujet reference points Paper reference points Plate reference points

A plate template features the reference to the plate, the paper or the sujet and also the reference points. There are 9 different reference points. Hotspot and reference point have the same names.