2018 AECNEXT SPAR3D Event Guide

2018 Event Guide JUNE 5–7, 2018 Anaheim Convention Center Anaheim, CA

Produced by Diversified Communications

Autodesk

Two Shows. One Location. – 1

2 – AEC Next / SPAR 3D 2018 Event Guide

General Information **Please note: This Event Guide was printed on 5/15/2018 and as such, information contained in this booklet is scheduled to change. Please download the Mobile App to gain access to up-to-date event information.

Download the App for: - Conference Schedule - Session Abstracts - Detailed Search by Tracks - Speaker Bios - Exhibitor Info - Sponsor Info - and much more!

Log in to:

WiFi Access Keep information at your fingertips! Look for the Anaheim Free WiFi network.

Registration Due to liability restrictions, no one under the age of 18, including infants & toddlers, will be allowed in the exhibit hall or conference area at any time.

Access to exhibits and conference areas is permitted by badge only. Badges may be obtained at the registration counter.

All visitors must register and provide a form of identification. On-site registration fees vary and may be viewed at the registration counter.

- Create a Personalized Schedule - Network with other Attendees - Bookmark Favorite Vendors - Participate in Session Surveys - and much more!

Registration Hours

Get the App:

AEC Next Conference Hours

1. GO TO THE RIGHT STORE. Access the App Store on iOS devices and the Play Store on Android. If you’re using a Blackberry or Windows phone, skip these steps. You’ll need to use the web version of the app found here: event.crowdcompass. com/sparaec

2. INSTALL THE APP. Search for and Download CrowdCompass AttendeeHub. Once you’ve downloaded and opened the CrowdCompass AttendeeHub app, search SPAR 3D & AEC Next 2018 and tap download. You’ll then have access to the event!

To Log in: 1. ENTER YOUR DETAILS. Enter your first and last name where prompted, then tap Next. Enter an email address where you’d like the verification email sent (NOTE: this address should be accessible from the device you will be using).

2. VERIFY YOUR ACCOUNT. Exit the app and open your verification email, click Verify Account. Click Open App to complete the verification via your mobile app. On the next page, you’ll see your confirmation code has already been carried over; all you have to do is click Finish!

Monday, June 4 (Exhibitor Only) Tuesday, June 5 Wednesday, June 6 Thursday, June 7 Tuesday, June 5 Wednesday, June 6 Thursday, June 7

1:00PM – 5:00PM 7:30AM – 5:00PM 7:30AM – 5:00PM 8:00AM – 3:00PM 8:30AM – 5:00PM 8:30AM – 5:00PM 8:30AM – 5:00PM

SPAR 3D Conference Hours Tuesday, June 5 Wednesday, June 6 Thursday, June 7

9:45AM – 5:00PM 8:30AM – 5:00PM 8:30AM – 5:00PM

Exhibit Hall Hours Wednesday, June 6 10:00AM – 5:00PM Thursday, June 7 10:00AM – 4:00PM

Event Badges The official AEC Next or SPAR 3D badge should be prominently displayed at all times in order to gain admission to the conference sessions, exhibit hall, keynotes and special events. All replacement badges will cost $100.

Reprints must be accompanied by a photo ID.

Privacy Unauthorized solicitation is prohibited.

Solicitation of business on premises of the exhibit hall by anyone other than official AEC Next and SPAR 3D exhibitors is strictly forbidden. Solicitation of

business in conference sessions, registration area, or lounge/waiting areas, is also prohibited. Please report any such occurrences to show management immediately.

Event Information Have any questions about the event? The registration desk in the lobby will be fully staffed with people who can help you throughout the event. Please stop by – we look forward to meeting you and welcome your suggestions and ideas on what we can do to make AEC Next and SPAR 3D even better in 2019 and beyond.

Safety & Security If you see something, say something.

Any thefts or suspicious activity should be reported to the Anaheim Convention Center’s Security Control Center at 714-765-8975 or to Event Management at Registration in the lobby.

IN CASE OF AN EMERGENCY AT THE VENUE: Report the emergency immediately by calling the Anaheim Convention Center’s Security Control Center at 714-765-8975 (or 8975 from any ACC house phone); or inform Event Management staff at Registration in the lobby.

IN CASE OF EVACUATION: • Follow the instructions given over the building public address system and by Anaheim Convention Center’s staff and security personnel.

• Calmly proceed to the closest unobstructed exit or stairwell and begin to exit the venue.

• Do not use escalators or elevators in the event of a fire.

Lost and Found Lost and found articles during the conference program may be turned in or claimed at the Registration desk in the lobby. After the close of the event, inquiries regarding lost and found items can be made by contacting Anaheim Convention Center’s Security Control Center at 714-765-8975.

PLEASE NOTE: For information about the conference schedule and conference proceedings, please refer to page 4 or visit the Conference Program in the mobile app or online at: https://www.aecst.com/conference-program/ and https://www.spar3d.com/event/conference-program/

Two Shows. One Location. – 3

Conference Schedule Tuesday, June 5, 2018 AEC NEXT TECHNOLOGY EXPO + CONFERENCE SCHEDULE 8:30

ROOM 206A

ROOM 205B

ROOM 205A

ROOM 207A

ROOM 207B

ROOM 207C

ROOM 207D

BIMStorm:

Technology in Education Part 1: Skill Development

BIM For FM:

SPEC/BIM Integration

It’s All About the Data – Where to Begin

TU104

How Advanced Technologies are Transforming the AEC Industry

Leveraging Project Accounting and Marketing Systems to Increase Profits

AEC Innovation + Investment Part 1: • Digital Maturity in the AEC Industry – How Does Your Organization Measure Up? • Innovation in AEC TU107

AEC Game Changers TU101 9:00

• Building Information Modeling Body of Knowledge: Cultivate a BIM Competent Workforce • A Shared Experience in BIM Learning Designed to Gain Incremental Skills

by Industry Support

9:30

Presented by: IFMA

TU105

TU106

TU103

TU102

10:00

NETWORKING & COFFEE BREAK - 1ST FLOOR LOBBY 10:30

11:00

BIMStorm: Dynamic Planning and Master Planning (San Jose Airport) TU201

Technology in Education Part 2: Case Studies • Integration Opportunities in a 5 Year Architectural Engineering Curriculum • Applying Technology Education to Real-World Challenges

Making it Practical: Existing Buildings & Reality Capture Presented by: IFMA

Building Documentation National BIM Standards: for the AEC Community What’s Now? What’s Next?

Presented by: USIBD TU204

TU203

TU202

11:30

Data Driven Green Design TU206

AEC Innovation + Investment Part 2:

Presented by: National Institute of Building Sciences buildingSMART alliance®

• Technology Findings and Trends

TU205

TU207

• Fostering the Construction Revolution

12:00

12:30

SESSION BREAK 1:00

1:30

2:00

BIMStorm: Standards, Risks, Cyber Security, Blockchain & the Building Industry TU301

2:30

Technology in Education Part 3: New Tools • A Model-Based Approach for Managing Activities and Flows On Site

Keeping it Practical: New Construction, As-Built & Handover Presented by: IFMA

Finally, True Integration of BIM Models and Specifications

Unlocking Disruptive AEC Innovation Through a Digital Transformation

TU304

Presented by: CPC Coalition

• Unmanned Systems Collaboration in Construction Industry: The Next Step TU303 of Increasing Efficiencies by Integrating Aerial with Ground Unmanned Systems

TU305

Infrastructure, Design & Execution

Changing Rol of IT in Construction

• 21st Century Infrastructure Project Execution/Redefining Project Phases

Presented by: AGC TU307

• A UAV Case Study: Rellis Campus

• Offsite Architecture: Building the Future

TU306

TU302

3:00

NETWORKING & COFFEE BREAK - 1ST FLOOR LOBBY 3:30

BIMStorm: What is Next for AEC and Owners?

4:00

Successfully Outsource Your Construction Business TU402

TU401

Keeping it Practical: Space, Workspace and Real Estate, Beyond FM Presented by: IFMA TU403

Healthy Buildings for Everyone: Tapping into Biology to Grow the Next Generation of Buildings TU404

Virtual Reality in AEC

Digital Construction Part 2:

Modern IT Innovations:

• Impact of AR/VR on Improving Work Flow in AEC

• Digitization in the Construction Industry

Changing the Conversation in Construction

• Agile CM: Disruptive, Innovative

Presented by: AGC

TU406

TU407

• Virtual Reality Revolution for the AEC Industry TU405

4:30

5:00

5:30

SPONSORED BY:

Welcome Happy Hour Located on the California Terrace - 3rd Floor Lobby

6:00

See page 15 for more details 6:30

4 – AEC Next / SPAR 3D 2018 Event Guide

(Entrance included with all registrations)

Download the App! DOWNLOAD THE APP TO ACCESS: - Detailed Search by Tracks - Session Abstracts - Speaker Bios - AIA accreditation information and more!

Tuesday, June 5, 2018 SPAR 3D EXPO & CONFERENCE SCHEDULE ROOM 303A

ROOM 303B

TRACK 1 - PRODUCT PREVIEW PRESENTATIONS:

9:45 - 10:00

ROOM 303C

TRACK 2 - PRODUCT PREVIEW PRESENTATIONS:

GEOSLAM

9:45 - 10:00

*Check mobile app for updates

10:00 - 10:15

FARO

10:00 - 10:15

Euclideon

10:15 - 10:30

Pix4D

10:15 - 10:30

TOPCON

10:30 - 10:45

NCTech

10:30 - 10:45

Z+F

10:45 - 11:00

Teledyne Optech

10:45 - 11:00

Surphaser

11:00 - 11:15

Trimble

11:00 - 11:15

Bentley

11:15 - 11:30

Cintoo

11:15 - 11:30

NavVis

11:30 - 11:45

Orbit GT

11:30 - 11:45

*Check mobile app for updates

SESSION BREAK

SPAR 3D OPENING & KEYNOTE - BALLROOM A&B WELCOME - Lisa Murray, Group Director, Diversified Communications THE TELESCOPE OF TOMORROW - Alexander Menzies, NASA Jet Propulsion Laboratory THE COGNITIVE FACILITY “OPERATING IN THE FUTURE” OR THE MANY WORLDS INTERPRETATION OF OPERATIONS - Dave Truch, BP 2D/3D VISUALIZATION WITH DIGITAL TWIN - Baptiste Tripard, Intel Corporation*

NETWORKING & COFFEE BREAK - 1ST FLOOR LOBBY TRANSPORTATION 3:30 - 3:50 ATLAS: Solution for a Better Point Cloud Sharing and Exploitation in SNCF RESEAU 3:50 - 4:10 Execution of 3D Mapping, Planning, Design & Construction of Transportation Infrastructure Mode 4:10 - 4:30 Using Network Level 3D Road Surface Condition Data at the Project Level 4:30 - 5:00 Panel Discussion

VIRTUAL DESIGN & CONSTRUCTION (VDC)

AUTONOMOUS TECHNOLOGIES

3:30 - 3:50 Not Your Everyday Projects

3:30 - 3:50 Mapping the World with LiDAR

3:50 - 4:10 Rapid Actionable Insight with Reality Capture and VR

3:50 - 4:10 Introducing Augmented Reality to Autonomous Vehicles: Sharing a Car’s 3D Perception with Passengers to Build Trust in Autonomous Vehicles

4:10 - 4:30 Hudson Yards West: Collecting & Digitizing Large-Scale Existing Infrastructure Data 4:30 - 5:00 Panel Discussion

Welcome Happy Hour

4:10 - 4:30 Breaking Free of the LiDAR Straitjacket 4:30 - 5:00 Panel Discussion

SPONSORED BY:

Located on the California Terrace - 3rd Floor Lobby (Entrance included with all registrations)

See page 15 for more details

*Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.

*Schedule and presenters subject to change.

Two Shows. One Location. – 5

Conference Schedule Wednesday, June 6, 2018 AEC NEXT TECHNOLOGY EXPO + CONFERENCE SCHEDULE 8:30

ROOM 206A

ROOM 205B

ROOM 205A

ROOM 207A

ROOM 207B

ROOM 207C

ROOM 207D

Project Planning and Execution

Drones in Construction

KEYNOTE - BALLROOM A&B 9:00

CREATIVITY & CONSTRUCTABILITY IN AEC

9:30

Ken Sanders, Gensler and Jack Dahlgren, NVIDIA

10:00

NETWORKING & COFFEE BREAK - EXHIBIT HALL 10:30

11:00

BIMStorm:

The Basics of BIM

Healthcare Facility Using SEPS2BIM

• Introduction to BIM: Past, Present, Future

Proving the ROI for BIM for FM – The Pilot Approach

WE501

• BIM for Small Firms

WE503

Zero Energy:

Design Immersion:

The New Normal

Sketch to Virtual Reality

Presented by: New Buildings Institute

WE505

• The Best of Both Worlds: A Hybrid Scheduling Solution

WE504

WE502

• The Use of 3D Printers in Construction Projects

11:30

WE506

• Integrating UAV into the BIM/ Construction Environment • Drones and Photogrammetry Driving New BIM Innovations and Returns • Aerial Technology: The B2B “Google Earth Type” Future • The Definitive Guide to Drones in Construction WE507

12:00

12:30

LUNCH - EXHIBIT HALL (AVAILABLE FOR PURCHASE) 1:00

1:30

2:00

SESSION BREAK 2:30

3:00

NETWORKING & COFFEE BREAK - EXHIBIT HALL 3:30

4:00

BIMStorm:

Building with Legos:

Higher Education Planning to Lifecycle – Penn State & California Community Colleges Planning to Lifecycle

BIM Management & Execution for Design and Construction WE602

WE601 4:30

Increasing Your Facility Performance:

Multifamily Energy Efficiency

Advanced BIM Management

A Little Data Can Go a Long Way!

Presented by: New Buildings Institute

WE603

WE604

• Computational Approaches to BIM Workflows • Strategies for Coordinating 4D Planning with Project LOD WE605

Emerging Technologies for Construction Management • Application of Emerging Technologies for Construction Management • Improving Project Delivery Through RiskAdjusted Schedules WE606

3D and IOT for Civil/Site • Accelerating Site Survey, DTM and 3D Modeling Through Reality Capture • IoT Is the Next Frontier for Drone Data • LIDAR and Photogrammetry: Comprehensive Data Collection for Historical Preservation WE607

6:00

PLAZA PALOOZA PARTY

5:30

5:00PM to 7:00PM

5:00

6:30

6 – AEC Next / SPAR 3D 2018 Event Guide

SPONSORED BY:

See page 15 for more details

Download the App! DOWNLOAD THE APP TO ACCESS: - Detailed Search by Tracks - Session Abstracts - Speaker Bios - AIA accreditation information and more!

Wednesday, June 6, 2018 SPAR 3D EXPO & CONFERENCE SCHEDULE ROOM 303A

ROOM 303B

ROOM 303C KEYNOTE - BALLROOM A&B

CREATIVITY & CONSTRUCTABILITY IN AEC Ken Sanders, Gensler and Jack Dahlgren, NVIDIA

NETWORKING & COFFEE BREAK - EXHIBIT HALL AEC & VDC

MINING & AGGREGATES

SELECTING 3D TECHNOLOGIES FOR REALITY CAPTURE

10:30 - 10:50 xR Coming to Jobsite Near You...Very Soon!

10:30 - 10:50 Communicating Complex Engineering Projects Using Holographic Visualization

10:30 - 10:50 Selecting 3D Technologies for Reality Capture

10:50 - 11:10 How Augmented Reality will become the new UI for AEC and IoT

10:50 - 11:10 Hyperspectral and GPR Integrated With Photorealistic Models

11:10 - 11:30 From Design to Construction: AEC Case Study

11:10 - 11:30 Leverage Apple’s AR Kit for more Robust 3D reconstruction from Imagery

11:30 - 12:00 Panel Discussion

11:30 - 12:00 Panel Discussion

10:50 - 11:10 Incorporate BIM and Other Process Considerations into Technology Selection Criteria 11:10-11:30 Selecting Appropriate Technologies On-The-Fly 11:30 - 12:00 Panel Discussion

LUNCH - EXHIBIT HALL (AVAILABLE FOR PURCHASE)

INDUSTRIAL FACILITIES /ASSET MANAGEMENT

SECURITY, LAW ENFORCEMENT, FORENSICS

SHOULD YOUR 3D BE IN-HOUSED OR OUTSOURCED?

1:30 - 1:50 Automated 3D Measurement by Photogrammetry & Laser Triangulation

1:30 - 1:50 Robotic Aerial Security – Utilizing UAVs for Physical Security

1:30-2:00 In-House vs. Outsourcing Considerations and Costs

1:50 - 2:10 Applications of 3D Technology for Forensics

2:00-2:30 COTS: Common Tools; Pros & Cons; Actual Costs of Modification

2:10 - 2:30 Drone Cops: Law Enforcement use of Small Unmanned Aircraft Systems

2:30-3:00 Panel Dicussion

1:50 - 2:10 A Strategic Approach to Data Capture, Documentation, Service and Storage for the Lifecycle of a Project 2:10 - 2:30 From Capture to Delivery: Industrial & FM Case Studies

2:30 - 3:00 Panel Discussion

2:30 - 3:00 Panel Discussion

NETWORKING & COFFEE BREAK - EXHIBIT HALL CONTRACTING FOR 3D TECHNOLOGIES

3:30 - 3:50 Storm Damage Restoration: Collecting, Preparing, and Visualizing UAV Data

3:30-4:00 Deliverables: What Should You Expect & Specify

3:50 - 4:10 Can’t see the Forest for the Trees?

3:50 - 4:10 Mobile Subsea LiDAR – Applications and Opportunities

4:10 - 4:30 Integrating UAS LiDAR, Imagery and UAV Sonar with Geodetic Survey Control for Dam and Reservoir Project

4:10 - 4:30 Scalable Integration of Geospatial Technologies for 3D Utility Locating and Mapping

4:30 - 5:00 Panel Discussion

4:30 - 5:00 Panel Discussion

5:00PM to 7:00PM

PROCESS, POWER, UTILITIES

3:30 - 3:50 Assessment of Terrestrial LiDAR Point-Cloud Noise for Deformation Monitoring of Structures

PLAZA PALOOZA PARTY

SURVEYING & MAPPING

*Schedule and presenters subject to change.

4:00-4:30 Anticipating for New Technologies 4:30-5:00 Panel Discussion

Join friends and colleagues for brews, bites, and beats at the official 2018 conference party in the outdoor garden plaza of the Anaheim Convention Center!

(Ticketed Event. Inquire at Registration)

Two Shows. One Location. – 7

Conference Schedule Thursday, June 7, 2018 AEC NEXT TECHNOLOGY EXPO + CONFERENCE SCHEDULE 8:30

ROOM 206A

ROOM 205B

ROOM 205A

ROOM 207A

ROOM 207B

ROOM 207C

ROOM 207D

KEYNOTE - BALLROOM A&B 9:00

CHALLENGES OF CHANGE: PROJECT 2020 AND THE JOBSITE OF THE FUTURE

9:15

Darren Bechtel, Brick & Mortar Ventures; Ira Samm, Bechtel; Angie Ackroyd, Shell TechWorks

INTEGRATED PROJECTS – A VISION FOR FUTURE

9:30

Atul Khanzode, DPR Construction 10:00

NETWORKING & COFFEE BREAK - EXHIBIT HALL 10:30

11:00

BIMStorm:

Collaborative BIM

BIM in Engineering

Facility Lifecycyle and Assets

TH702

• Unlocking the Value of Project Data: How Jacobs Engineering is taking Advanced Work Packaging to the Next Level

TH701

• Innovation and Technology at Large Scale 11:30

• Creating the BIM Value in Incremental Growth of Efficient Data Center Design

Preparing for Tomorrow's Intelligent, High Performance Buildings

Project, Financial & Construction Management – Decision Management

• Defining “FutureProofing”

TH705

• High Performance Building. What has Washington DC got to do with it?

Exploring the Jobsite Connectivity

Smart Cities and Their Effect on the AEC Industry

• Connecting the Jobsite Through IoT-Based Systems

TH707

• Automating Reality Capture on the Jobsite using UAV’s and Rovers TH706

TH704

TH703

12:00

12:30

LUNCH - EXHIBIT HALL (AVAILABLE FOR PURCHASE) 1:00

1:30

2:00

SESSION BREAK 2:30

3:00

NETWORKING & COFFEE BREAK - EXHIBIT HALL 3:30

4:00

BIM and LEAN Integrated Project Delivery Large Scale Projects. $150M Dollar Case Studies

Facility, Asset & Life-Cycle Management and VDC Roadmaps for Owners TH802

TH801 4:30

5:00

8 – AEC Next / SPAR 3D 2018 Event Guide

Protecting the Digital Gadgets in Your (Almost) Smart Buildings TH803

Stay Ahead of the Contractual Curve TH804

Jobsite Management • The Future of AEC Automation • How Digital Technology Can Help Us Achieve Better Productivity and Safety TH805

Collecting & Digitizing Large-Scale Existing Infrastructure Data TH806

Download the App! DOWNLOAD THE APP TO ACCESS: - Detailed Search by Tracks - Session Abstracts - Speaker Bios - AIA accreditation information and more!

Thursday, June 7, 2018 SPAR 3D EXPO & CONFERENCE SCHEDULE ROOM 303A

ROOM 303B

ROOM 303C KEYNOTE - BALLROOM A&B

CHALLENGES OF CHANGE: PROJECT 2020 AND THE JOBSITE OF THE FUTURE Darren Bechtel, Brick & Mortar Ventures; Ira Samm, Bechtel; Angie Ackroyd, Shell TechWorks

INTEGRATED PROJECTS – A VISION FOR FUTURE Atul Khanzode, DPR Construction

NETWORKING & COFFEE BREAK - EXHIBIT HALL CIVIL INFRASTRUCTURE 10:30 - 10:50 Monitoring Tensar Geogrid Wall Systems: Integrating Scanning with Traditional Surveying; Workflow and Processing 10:50 - 11:10 Building the Value Proposition for Integrating UAS into Infrastructure Inspection Projects 11:10 - 11:30 The Hidden Value of Mobile Scanning 11:30 - 12:00 Panel Discussion

UNIQUE APPLICATIONS (Insurance & Real Estate; Entertainment & Gaming)

INTEGRATING 3D DATA – Bring Your Unique Challenges and Questions

10:30 - 10:50 Long Live Photogrammetry and SLAM: How Edge Computing and Cheap Hardware Enable Real-Time, Real-World 3D Modeling

10:30 - 11:00 Integrating 3D Technologies Across the Enterprise and with Constituents

10:50 - 11:10 3D Spatial Data Acquisition Technology Fusion in the VFX Entertainment Industry. Application Spotlight: HBO’s Hit Series Game of Thrones

11:00 - 11:30 Check mobile app for session information

11:10 - 11:30 How to Move from a 3D Scan to a Design Ready for 3D Metal Printing 11:30 - 12:00 Panel Discussion

11:30 - 12:00 Attendees: Bring Your Challenges!

Panel Discussion of Experts will offer advice for solving your specific 3D technology challenges

LUNCH - EXHIBIT HALL (AVAILABLE FOR PURCHASE)

REALITY CAPTURE IN FM AND AEC: SUCCESSES, TRENDS AND CHALLENGES 1:30 - 1:50 From Cloud to Crane – Laser Scanning for Modeling and Simulation 1:50 - 2:10 Integrating Disruptive Technology into Your Workflow 2:10 - 2:30 The Use of Imagery in As-Built Documentation 2:30 - 3:00 Panel Discussion

DIGITAL HISTORIC PRESERVATION 1:30 - 1:50 Virtualizing World Heritage Sites in the Mediterranean Region 1:50 - 2:10 The Alamo: Documenting San Antonio’s historic district 2:10 - 2:30 1914 Grand Prix Delage Saved by 3D Scanning & 3D Printing 2:30 - 3:00 Panel Discussion

NETWORKING & COFFEE BREAK - EXHIBIT HALL

EXPERTS VIEW INTO THE FUTURE What’s Ahead for 3D Technologies, and Impact on Technology Investments Fireside chat with experts discussing realities and timeline for profitable and widespread use of AR/VR, AI/computer vision, autonomy and more.

Panelists include: Angie Ackroyd, Shell TechWorks; Curtis Chan, Autodesk; Nathan Pettyjohn, The VRARA; Baptiste Tripard, Intel Corporation

*Schedule and presenters subject to change

Two Shows. One Location. – 9

Workshops & User Conferences We are proud to host multiple workshops and user group meetings to bring the industry together for unparalleled networking and learning. Visit the Workshop pages of aecst.com or spar3d.com/event for detailed information.

Tuesday, June 5, 2018 TIME

EVENT

ROOM

9:00AM – 12:00PM

EdgeWise and Verity User Group Meeting

304A

9:00AM – 5:15PM

SoCal Bentley User Bash

208A - 210D

1:00PM – 4:00PM

SoCal Bentley User Bash

208A - 210D

4:00PM – 6:00PM

Assemble Systems Meet-up

206B

9:00AM – 12:00PM

PIX4D Short Course: The Power of Drones for AEC Applications

210D

2:00PM – 5:00PM

USIBD Meet-up

210B

Wednesday, June 6, 2018

Thursday, June 7, 2018

TECHNOLOGY | ARCHITECTURE + DESIGN

COME VISIT BOOTH # 222

TAD

VISIT OUR WEBSITE AT WWW.TADJOURNAL.ORG

10 – AEC Next / SPAR 3D 2018 Event Guide

VISIBILITY into worker and equipment location,

!

utilization and safety

JOIN OUR CEO FOR A PRESENTATION ON

VISIT

BOOTH 659 FIRSTHAND Meet our team and

SPECIAL

“CONNECTING THE JOBSITE THROUGH Io BASED SYSTEMS”

experience our dynamic dashboard

PRESENTATION WED, JUNE 6TH AT 1PM in the Connected Jobsite Theater

THURS, JUNE 7TH AT 10:30AM IN TH706

CONNECT WITH US www.triaxtec.com

@TriaxSpotr

@TriaxTec

Two Shows. One Location. – 11

Demo Theater Schedule Check out the 70+ FREE education sessions on the show floor at four different presentation theaters: BIM + IPD Theater, Building Performance Theater, Connected Jobsites Theater, and SPAR 3D Theater. Pull up a seat for these 20-minute sessions and engage with the biggest players in AEC and 3D technology. For the most up-to-date schedule, download the mobile app.

BIM + IPD Theater At the Building Information Modeling and Integrated Project Delivery Theater, you will learn about the latest product developments and best practices from commercial AEC developers, services, and solutions providers. See the power, the speed, and the tools coming to our market to improve AEC collaboration and interoperability.

Wednesday, June 6, 2018 11:00AM

BQE Software: Disrupting Your Firm to Save It: Competing in the World of Artificial Intelligence

12:00PM

Revizto: Controlling the Chaos: BIM Coordination of the Future

1:00PM

VIATechnik, LLC: BIM Today & Tomorrow – VisualizationIntegration Automation

1:30PM

Assemble Systems: Innovative Technology Solution for Leveraging BIM Data

2:00PM

ALLPLAN: The Impacts of Digital Workflows on Infrastructure Projects

Thursday, June 7, 2018 11:00AM

Dverse: Workflow in VR – A New Solution

11:30AM

Trimble: How Emerging Technologies are Influencing the Construction Industry

1:00PM

Archway Systems, Inc: BIM: Past, Present, Future

2:00PM

ALLPLAN: The Impacts of Digital Workflows on Infrastructure Projects

Building Performance Theater Explore solutions, new materials/building products, and strategies for the integration and life-cycle optimization of all major high-performance building attributes including energy conservation, design resiliency, safety, security, accessibility, and durability, green building, sustainability, functionality, and operational concerns.

Wednesday, June 6, 2018 11:00AM

City of Anaheim Public Utilities: Anaheim, Where Innovation is Fostered and Business is Empowered

12:00PM

United Rentals: Innovative Construction Support Technologies

12:30PM

United Rentals: Benchmark and Maximize Equipment Utilization

1:00PM

Fox Blocks

2:00PM

TestFit: Practical Generative Design

2:30PM

PlanIT Impact: Integrated Date Driven Design Process

Thursday, June 7, 2018 11:30AM 2:30PM

Umbra: Onsite with Augmented Reality Raken: Simplified Field Entry for Streamlined Jobsite Metrics

12 – AEC Next / SPAR 3D 2018 Event Guide

Connected Jobsites Theater Want a smarter jobsite? See how new technologies are making it happen with the latest thinking and products for construction management, IoT, project management, WiFi, drones, and site monitoring tools all working to connect the jobsite to the design office and speed project delivery on-time and on-budget.

Wednesday, June 6, 2018 11:30AM

3D Robotics: Connecting Workflows With Drone Data and BIM 360

1:00PM

Triax Technologies, Inc: Connecting the Jobsite Through IoT-Based Systems

1:30PM

Rendra AS/StreamBIM Plan Together, Work Faster, and Build Smarter. How StreamBIM Makes Building Easy

2:30PM

PlanGrid: How Technology Increases Construction Productivity in the Era of Labor Shortages

3:00PM

SlatPlanner - Keeping it Real: Digital Planning with Real Sticky Notes

3:30PM

TimeMachine: How a Real Time Machine is Changing Future of Construction

Thursday, June 7, 2018 11:00AM

DEWALT: Moving Beyond BIM – Leveraging Design Automation

11:30AM

Rendra AS/StreamBIM Plan Together, Work Faster, and Build Smarter. How StreamBIM Makes Building Easy

12:00PM 12:30PM

AEC PROJECT SERVICES

AEC PROJECT SERVICES

Kelar Pacific: 3D Lidar Scanning Solves Project LOD 500 as-built BIM FM Deliverable Challenge Kelar Pacific: Bluebeam Revu 2018 - See What’s New

1:00PM

Procore: The Procore Platform

1:30PM

Trimble: Transforming the Future of Construction through BIM-centric Project Management

2:00PM

Ryvit: Empower Next – The Future of Application Networking

2:30PM

Dropbox

3:00PM

Pix4D, Inc: Automated Crane Camera and Cloud Based Solution for Daily Site Surveying and BIM

SPAR 3D Demo Theater At the SPAR 3D Demo Theater, you’ll see leading 3D technology for commercial applications. Preview the latest 3D technology and learn how professionals are implementing it to make their work easier.

Wednesday, June 6, 2018

Thursday, June 7, 2018

10:00AM

GEOSLAM

10:00AM

GEOSLAM

10:30AM

Indoor Intelligence

10:30AM

Bentley

11:00AM

AVEVA

11:00AM

Bentley

11:30AM

Cupix

11:30AM

Undet

12:00PM Check the mobile app for updates.

12:00PM Check the mobile app for updates.

12:30PM

12:30PM Check the mobile app for updates.

ELYSIUM

1:00PM

LookingGlass Factory

1:00PM

Cintoo

1:30PM

Topcon

1:30PM

Pointcab

2:00PM

Autodesk

2:00PM

Bentley

2:30PM

Autodesk

2:30PM

Bentley

3:00PM

Trimble

3:00PM

Autodesk

3:30PM

Geo-Plus

3:30PM

Autodesk Two Shows. One Location. – 13

AEC Next Launch Center The AEC Next Launch Center is a dedicated area on the show floor providing a platform for cutting-edge solutions in the built world. Explore new ideas and emerging technologies that redefine how projects are planned, designed, and constructed; how cost overruns are minimized; and how facilities are managed throughout the project life-cycle for optimum performance. The AEC Next Launch Center is the solution for investors, innovators, key users and other tech-hungry AEC players seeking to improve our built world.

Companies include:

http://www.acqubit.com/

https://builttechlabs.co/uiltTech

https://www.caxperts.com/software/

https://www.senserasystems.com/

https://www.structionsite.com/

https://testfit.io/

https://umbra3d.com/

SPAR 3D Launch Center In this dedicated area of the exhibit hall you’ll find cutting-edge 3D technology from recently launched companies.

Learn how these companies are redefining how we work, and check out the latest developments in 3D technology.

SPAR 3D Launch Center is ideal for investors, innovators, power users, and other techies to see where the 3D technology industry is headed and the companies who are leading the way.

Companies include:

http://rep3d.com

14 – AEC Next / SPAR 3D 2018 Event Guide

http://www.undet.com/

SPONSORED BY:

Tuesday, June 5 5:00pm to 6:30pm

Kick back and have a drink on us on the third floor, California Terrace with some of your new-found friends. After a long day of conference sessions and user group workshops, this is where vendors and decision makers will gather to continue the conversation.

Cheers!

SPONSORED BY:

Wednesday, June 6 5:00pm to 7:00pm Join us for the official party of the event in the outdoor garden plaza at the Anaheim Convention Center!

Network with fellow attendees from leading companies and connect oneon-one with exhibitors while enjoying drinks and snacks. Get excited for local craft beer, food trucks, music and a great time!

If you haven’t bought a ticket, yet, head over to the Registration Desk and reserve your spot!

Two Shows. One Location. – 15

New Product Showcase LOCATED IN THE MAIN LOBBY NEAR THE ESCALATORS. For additional information on each product visit the New Products Showcase section of the mobile app or visit the event websites.

THE AEC NEXT / SPAR 3D

Photo Challenge Sign on to the app and compete

TO WIN $500!

Use the mobile app to explore the show floor and discover all that AEC Next and SPAR 3D have to offer!

Complete all challenges and snap a photo to be entered to win $500! Winner will be announced at 3:00pm on Thursday via a push notification. Stay tuned to see if you’re the big winner!

16 – AEC Next / SPAR 3D 2018 Event Guide

Two Shows. One Location. – 17

Exhibitor Listing 3D Robotics......................................230

GeoBusiness.....................................335

Pointfuse..........................................331

3DReshaper......................................635

Geomni............................................100

Procore.............................................421

ACQUBIT..........................................654

Geo-Plus...........................................435

QUBE 4D Ventures............................225

AECCafe.com....................................645

GeoSLAM.........................................539

Raken...............................................349

Aeoshape..........................................235

GISCafe.com.....................................645

Rendra AS........................................426

AIA Orange County............................649

Graphisoft US, Inc.............................459

Revizto.............................................348

Allplan US Inc..................................344

GreenValley International...................317

RIB Americas....................................444

American Education Systems..............313

iConstruct.........................................325

RIEGL USA Inc.................................501

American Institute of Building Design (AIBD)...................................647

Imajing s.a.s.....................................427

Ryvit................................................455

Indoor Intelligence............................511

Safe Software Inc..............................655

InEight.............................................601

Sanveo.............................................334

Informed Infrastructure......................424

Sensera Systems...............................557

Intel Corporation...............................616

Skur.................................................321

International Facility Management Association.......................................224

SlatPlanner.......................................606

AVEVA Inc........................................505 Bentley Systems, Incorporated............301

Intertek............................................510

BGC Engineering Inc.........................441

Kaarta..............................................249

BIM Track.........................................449

Kelar Pacific.....................................232

BirdsEyeView Aerobotics....................515

Lanmar Services................................430

Blackmore Sensors and Analytics........425

Lead’Air, Inc.....................................639

Blue Marble Geographics...................420

Leica Geosystems Inc........................210

TECHNOLOGY | ARCHITECTURE + DESIGN Journal.............................222

Bluebeam, Inc..................................457

LIDAR USA.......................................600

Teledyne Optech................................239

BQE Software....................................226

LOD Planner.....................................451

Builderbox........................................254

LookingGlass Factory.........................438

Topcon Immersive Dome Experience........................................101

Building Design & Construction..........512

Mandli Communications, Inc..............311

Building Forge...................................658

Mantis Vision....................................339

BuiltTech Labs..................................561

MatterHackers...................................611

Cal Poly, San Luis Obispo...................220

Matterport Inc...................................631

CAXperts..........................................555

NavVis US, Inc..................................538

Chetu, Inc........................................256

NC Tech Ltd......................................615

Cintoo..............................................514

Northeastern University......................121

City of Anaheim.................................351

#OISummit18 Open Integration Hub.........................255, 355

Archway Systems, Inc........................211 Asite................................................558 Assemble Systems.............................345 Autodesk, Inc....................................440

ClearEdge3D.....................................410 Consensus Docs................................422 Cupix...............................................411 CurvSurf, Inc....................................439 DeWalt Power Tools............................445 Digital Building Lab...........................604 DimEye............................................614 DotProduct.......................................347 Dropbox............................................423 Euclideon Pty Ltd..............................139 Faro Technologies..............................405 FLIR Systems, Inc.............................540 Fox Blocks........................................550

18 – AEC Next / SPAR 3D 2018 Event Guide

Orbit GT...........................................520 Osela Inc..........................................315 Ouster..............................................327 Paracosm..........................................310 Pavemetrics Systems Inc....................416 Phoenix LiDAR Systems.....................625 Pix4D...............................................316 PlanGrid...........................................258 PlanItImpact.....................................524 PLW Modelworks...............................554 POB.................................................446 Pointcab...........................................605

Solv3D Inc........................................414 StructionSite.....................................656 Surphaser.........................................530 Symmetry.........................................448 Synchro Ltd......................................323

Topcon Positioning Systems................201 Triax Technologies.............................657 Trimble Inc.......................................521 U.S. CAD..........................................245 Umbra..............................................559 UNDET Point Cloud Software.............610 United Rentals (UR)..........................432 Uplift Data Partners...........................548 US Dept of Commerce International Trade Administration US Commercial Service......................413 USIBD..............................................217 Vexcel Imaging..................................415 Viametris..........................................544 VIATechnik........................................431 VirtualGrid........................................526 VR/AR Association.............................234 Winning Technologies Inc...................450 Yuneec USA, Inc...............................517 Z+F USA, Inc....................................401

Exhibitor Hall Floormap Anaheim Convention Center

Exhibit Hall

Coffee Breaks 663

Concessions Area

Coffee Breaks

Sales Office

363

262

AECNext Launch Center 561 658

559

558

459

258

Open Integration Hub 657

656

557

556

457

655

654

555

554

455

550

451

548

449

544

445

649 647 645

639

Connected Jobsite Theater

545

539

256 355

450

351

448

349

446

347

444

345

540

441

440

538

439

438

635

255

435

254

348

249

344

245 145

339

239

335

334

139

235

432 631

531

530

431

430

BIM and IPD Theater

234 232

331

230

FM Zone 627

526

427

426

327

625

524

425

424

325

423

422

421

521

520

226

127

224

125

323

222

123

420

321

220

121

416

317

316

217

414

315

310

211

225

University Pavilion

Drone Pavilion

615

611

616

517

614

515

610

511

514

415

512

413

510

411

Building Performance Theater

313 410

311

210

111

SPAR 3D Launch Center

606 605

604

106 505

405

104 102

601

600

501

Entrance

401

301

201

101

100

Entrance

Two Shows. One Location. – 19

Conference Exhibitor HallRooms Floormap Anaheim Convention Center

LEVEL 2

210D

209B

207D

206B

210C

209 A

207C

206A

210B

208B

207B

205B

210A

208 A

207 A

205A

SPAR 3D Session Rooms

LEVEL 3 303D

304D 304C

B

A

303C

304B

303B

304A

303A

Welcome Happy Hour CALIFORNIA TERRACE

Keynotes

20 – AEC Next / SPAR 3D 2018 Event Guide

Events & Media for the Global Geospatial, Design, & Construction Markets EVENTS expouav.com/europe

lidarmap.org

expouav.com

Co-located with:

Jan. 28-30, 2019 | DENVER

Oct. 1-3, 2018 | LAS VEGAS

April 8-10, 2019 | AMSTERDAM URC Ventures

senseFly

USGS/Jason Stoker

Incorporating

DRONE world e po

ÂŽ

North America’s leading trade show and conference for the commercial drone market.

A technical conference and exhibition focused on LiDAR and emerging remotesensing and data collection tools and technologies including Geiger Mode and Single Photon Counting.

aecst.com

The pan-European conference and expo focused on the commercial drone market.

spar3d.com/event Co-located

May 21-23, 2019 | ANAHEIM, CA

May 21-23, 2019 | ANAHEIM, CA

AEC Next explores the latest trends, best practices, emerging technologies, and new products to help design, construct, and manage projects smarter and to help make our built environment better!

The only vendor-neutral 3D technology event focused on 3D sensing, 3D processing and 3D visualization tools.

We’ve got you covered

Events & Media produced by

MEDIA commercialuavnews.com

spar3d.com

aecst.com/news

Photo courtesy of Airobotics

Image Courtesy of Siemens

4 TRENDS in 3D Capture Tech for Utilities, Power, & Process

8 Commercial Drone Predictions for 2018

By Sean Higgins, Managing Editor, SPAR 3D

By Jeremiah Karpowicz

Brought to you by: Brought to you by: Produced by:

OCT 1 – 3, 2018 LAS VEGAS expouav.com

10 – 12 APRIL 2018 AMSTERDAM OCT 1 – 3, 2018 expouav.com/europe LAS VEGAS expouav.com

10 – 12 APRIL 2018 AMSTERDAM expouav.com/europe

1

News, Insight, Interviews, Blogs, Reports, Webinars

News, Insight, Interviews, Blogs, Reports, Webinars

SPAR3D.com is the leading source of information on commercial 3D technology, covering 3D sensing, 3D processing and 3D visualization tools. SPAR3D.com produces original articles, whitepapers, webinars and other valuable resources to inform and educate professionals across various industries.

Since launching in April 2016, Commercial UAV News quickly became a trusted source of news and information about the commercial drone industry.

We report on the market’s most important issues and help commercial UAV professionals make the best decisions for their business.

24 HOURS

7

DAYS A WEEK

365

DAYS A YEAR

Analysis, interviews and insights focused on the biggest names and issues in the AEC industry.

As the digital companion of the AEC Next event, AEC Next News is deigned to provide readers with in-depth insights that are unavailable anywhere else.

The site provides an innovative showcase of trends and topics that AEC professionals need to be aware of in order to help them navigate this ever evolving industry.

Autodesk

Thank You to Our Advisory Boards 2018 AEC Next Advisory Board Matt Abeles

Paul Doherty

R. Raymond Issa

Cameron Oskvig

Dan Stonecipher

BuiltWorlds

The Digit Group, Inc.

University of Florida

Federal Facilities Council

IMMERSIVx

Paul Bertram

Danielle Dy Buncio

Dr. Calvin Kam

M. Kevin Parfitt

Nathan Wood

PRB Connect, LLC

VIATechnik

bimSCORE

Penn State

SpectrumAEC

Paul Bonington

Stephen R. Hagan

Dr. Get W. Moy

Dennis Shelden

Digital Prism Advisors

Hagan Technologies

AECOM

Digital Building Lab

Steve Bracy

Dennis Hall

Cody Nowak

Dana Kennish Smith

BUILTR Labs

Hall a/e/c/ PA

Adam Cohen

Dave Henderson

SKUR

Topcon Positioning Systems

DKS Information Consulting

Kimon Onuma Onuma, Inc.E

Susan Smith AECCafe.com & GISCafe.com

2018 SPAR 3D Advisory Board Lon Addison

Alex Cunningham

Kourosh Langari

Aidan Mercer

Paul Tice

California Department of Transportation

Bentley Systems

ToPa 3D

Jim Dray

Eugene Liscio

Alan Robles

Will Tompkinson

AECOM

International Association of Forensic and Security Metrology (IAFSM)

Gensler

Insightful Dimensions

Matthew Craig

Danielle Dy Buncio

Andy Lowery

Ken Smerz

Geoff Zeiss

Becht Engineering

VIATechnik

Realwear, Inc

Eco3D

Between the Poles

Strategic Consulting

McCarthy Building Comp., Inc.

Kelly Cone Clearedge3D

24 – AEC Next / SPAR 3D 2018 Event Guide

MEASURE FROM IMAGES

Collaborating Partners. Thank you.

We would like to THANK the following organizations for their support:

Technology Partner

We would like to THANK the following media partners for their support:

26 – AEC Next / SPAR 3D 2018 Event Guide

ALLPLAN RAISE YOUR LEVEL ADVANCED BIM SOLUTIONS FOR CIVIL ENGINEERING As a leading supplier of BIM solutions for civil and structural engineers, ALLPLAN helps you with the digital transformation of your infrastructure projects.

SPEAKING SESSIONS

Wed June 6/Thu June 7 | 12:30pm - 12:50pm In the BIM & IDP Theater: “The impacts of digital workflows on infrastructure projects”

VISIT US IN BOOTH 344 610.620.5022 | info@allplan.com © ALLPLAN GmbH, Munich, Germany | ©iStockphoto.com/EuanBrownlie

allplan.com Two Shows. One Location. – 27