Mesh Grating Fixings

Any GRP installation is only as good as the fixings used which is why we only use 316/A4 quality stainless steel nuts, bolts, clips, clamps and washers. They may not last as long as the mesh panels or structural profiles but they are guaranteed for 10 years and can be replaced if they start to show signs of corrosion.

M-Clips

• Grade 316/A4

• Designed to secure open mesh grating to GRP Profile

Square Clips

Grade 316/A4

Secure Standard Mesh Panels to solid surfaces

Dome Washers

• Grade 316/A4

• Use with bolts For use with Solid Top Panels and Flat Plate

G-Clamps

• Grade 316/A4

• Secure two mesh panels side-by-side

• Supplied with hex bolt

J-Clamps

• Grade 316/A4

• Clamp panels securly to profiles that can’t be drilled

Joining Bars

• Join two panels edge to edge

Structural Profiles

Our GRP Profiles come in a variety of forms, including Angle, Tube, Box, C-Section, I-Beam and H-beam sections. Their strength and mechanical properties match or exceed traditional steel equivalents.

All our Pultruded Profiles are manufactured from glass-reinforced polyester resin (fibreglass) and include a continuous strand mat and a polyester surface veil on the exterior. This combination provides exceptional corrosion resistance and weather resistance, which makes our profiles low-maintenance and incredibly durable.

Our GRP profiles with a wall thickness of more than 5mm are high-performance (E23 grade), while those at 3-5mm are E17 grade.

Pultruded Profiles are supplied directly from stock in 6m lengths as standard. Profile can be cut to your required size for a small additional fee. Please let us know when you order.

Angle 50 x 40 x 6mm Grey

Angle 50 x 50 x 6mm Grey

Angle 75 x 75 x 10mm Grey

Angle 100 x 100 x 8mm Grey

Box 51 x 51 x 6mm Grey/Yellow

Box 76 x 76 x 6.35mm Grey

C-Section 100 x 40 x 5mm Grey

C-Section 150 x 50 x 6mm Grey

C-Section 200 x 60 x 8mm Grey

I-Beam 200 x 100 x 9.5mm Grey

H-Beam 200 x 200 x 10mm Grey

Tube 50 x 50mm Grey/Yellow