Issuu

Inquiry Stock Prescription : Sébastien Maredj, Technical Sales Engineer France ORKAL Industries LLC – Authorized Distributor for Adel Wiggins : PReece A Leading Stocking/Distributor of Tube Connection & Fluid Fitting Products M : +33 (0)6.51.19.11.67 | smaredj@orkal.com |www.orkal.com

DEL IGGINS GROUP

Quick Disconnect Couplings . .. -

RAN

D'~

Special Connectors

DEL

IGGINS GROUP

AdelWiggins offers a Complete line of specialty Quick disconnect devices for High Reliability applications.

200 Series ¼ ” to 2”

6000 Series ¼ ” to 2”

POL Series 1” to 1½ ”

20 Series 1/8” to 3/8”

30A Series ¼ ” to ¾ ”

VS100 and VS110 Series ¼ ” only

WF Series ½ ” and ¾ ”

General Purpose Quick Disconnect With Rod Latch

Burst Pressure: 600 PSI

Pressure Drop: 0.18 PSIG @ 2.9 GPM (1” size connector)

Medium Pressure Quick Disconnect w ith Dog Latch

Burst Pressure: 600 PSI

Pressure Drop: 0.18 PSIG @ 2.9 GPM (1” size connector)

High Pressure Quick Disconnect w ith Dog Latch

Burst pressure: 1,250 PSI

Pressure Drop: 2.3 PSIG @ 50.0 GPM (1” size connector)

Miniature Quick Disconnect w ith Dog Latch

Burst Pressure: 13,000 PSI

Pressure Drop: 0.9 PSIG @ 0.5 GPM (1/4” size connector)

Quick Disconnect w ith Relief Valve and Dog Latch

Burst Pressure: 7,500 PSI

Pressure Drop: 2.3 PSIG @ 50.0 GPM (½ ” size connector)

Instrument ation Pressure Testing Coupling

Burst Pressure: 17,000 PSI (w /o valve)

Pressure Drop: 0.9 PSIG @ 0.5 GPM

Pressure Re-Oil Coupling (Mil-Std-24476)

Burst Pressure: 3,750 PSI

Pressure Drop: 2.3 PSIG @ 50.0 GPM (½ ” size connector)

, . ADEL WIGGINS GROUP

NECT

ELECTRONIC COOLING HYDROCARBON FUELS

HYDRAULIC FLUIDS

200 SERIES GENERAL PURPOSE Designed specifically to meet the requirements of today's demanding electronic market, WIGGINS 200 Series couplings give high pe.rformance where the principa l requirements are: 1. Minimal Spillage

4. Light Weight

7. Minimum Size

2. Minimal Air Inclusion

5. Full Flow

8. Extended Coupling Life

3. Simple Push-Pull Motion

6. Minimum Pressure Drop

SOCKET/ NIPPLE CONNECTED

NIPPLE

SOCKET

ADVANTAGES FLUSH VALVING: Permits a minimal air inc lusion connection and a minimal spillage disconnection. Eliminates necessity of bleed equipment, extends equipment life and reduces customer cost. Surrounding equipment is protected from damage, shorting and corrosion. No mess, no-cleanup, no loss of cost ly flu ids. UNOBSTRUCTED FLOW AREA: Provides lowest pressure drop, reduces system pressure requirements and weight, while increasing cooling capacity. ROD LATCHING MECHANISM: Permits a single simple push to connect, pull to disconnect. No twisting, turning or torquing. Reduces diameters, permitting space saving insta I lations.

ADEL

WIGGINS Goci:·r-

SEAL MATERIAL: Bun a N (MI L-P-25732) permits maximum fluid compatibility. Handles most oil and hydraulic fluids. Compatible seals available for exotic fluids and temperatures above + 275° F. Fluorinated Si licone (MIL- R-25988) Handles Coolanol 25 & 35 and other fluids. from below -65° to + 450° F. Handles most hydrocarbon fluids from below -65° to over + 275° F.

END STYLES: Male and female pipe thread , MS33656 and MS33657. SIZES:

¼" through 2".

RELIEF VALVE: Available in nipple half, to relieve excessive system pressure build-up.

HOW TO ORDER - 200 SERIES INST-0-MATIC COUPLING

PE FO MANCE COMPARISONS SERIES

APPLICATIONS

REPRESENTATIVE fLUI OS

EC-200

General Purpose

Electronic Cooling (Water, Glycol) Fuel-Oil-Air-Hydraulic Fluids

LE -200

Electronic Cooling

Coolanol 25 and 35

JP -200

Hydrocarbon Fuels

JP-1, JP-4, JP-5, JP-6 and RP-1

HY-200

Hydraulic Fluids

Di-Ester Base and Other Synthetic Oils

Add Thi Prefix to P/ for Applicable Coupling.

PPLICABLE SPECIFICATIONS MIL-C-74138

Coupling, Quick Disconnect Automatic Shut -Off

This specification covers the general requirements for automatic shut-off. quick disconnect couplings for fluid lines .

MI L-C-2542 7 A

Co up Ii ng Ass em b Iy, Hydrau lic , Se lf -Sealing, Quick Disconnect

This specification covers the detai l requirements for aircraft hydraulic self-sealing qu ick disconnect couplings for use in Type I and Type II hydraulic systems as defined by Spec Ml L-H-5440.

MIL-E-5400H

Electrical Equipment, Airc raft , Genera l Specifications For

This specification covers the general requirements for the design and manufacture of airborne electronic equipment .

NIPP

R.,, .

,-· - - -

r- - - -

I I

•

- A

- -1

D -----

B MS33677 tAND!00/1 ) Ducrlpllon : F11t ,ng end, stand• rd d1mens1ons for taper p,pe thread !fo, u5e on AN sta nd a,d parts ),

END

TYPE

Desc:r1p11on : 1n1e,nal - ~tand.Jrd

d1mcns,on ro, p,pe hread

MS 33656 t AND\ 0056 ) Ducrlp tlon: F,11,ng end sland ard dimensions for flared tub~ connect,on & gasket seal

flared tub e connec::t ,on

PART NUMBER

MS 33657 IAND10057) Descri p tion: F,tl,n g end sland ard d,mens , ons f o r bulkhead

DIMENSION

Al.U --r--

1/..i''

200A4

200A6 tt:z•· 200A8 200Al'2 :V•" l" -+--'2=00Al6

=\II"

250M

l.188 1.533

J ,8l9

~5A4_

250A6 250A8 250A12

1,188 I -~3l

l.81~

-;.=c-=--'-''-<--'--- 1.188 1.533

1.879

-=+-=!<...f'=-=:--.'-" ,, i l.688 1.9_56

2.450

205A_6_ 205A8 205Al2

2~;5.Q

205Al6

-----

280A8

,-:.=

250Al6

"'-'""-"L...¥>=-" l,688 1,,956

l¼"

" 2,891 U5J. " 2.8,91 J ,851 2.89l .851.

11/2"

2" ¼'t

1.18jl fl.539 l.188_ 1.5.33 1.188 1.533

:l::e" ½"

200B12 :V•" 1" -+---'2"" 00=B1~ l¼" 200620

IE"

0B16 250B20 250824

250832

1/~t,

20004

'.l,~"

½"

~ '

200D10 200D12

1¼"

200016 200D20

200D24

.._

250B12

2" 1/,4' '

JJs "

~2" 5,'a"

25004 25006 250D8 250010 250012 250016

_,,. . l

..r·

L688 1.956 1.688 1.956

1.533

===~"-'-'

2Q5AZ.O 255A20 5,28,.,_-l--"2"' 05<'-A,,,2.:,.. 4 ~ 5 5A2~ .5.281 205l\3:t l 25SA32

I1.s19 1..819

1!~. "'" I ~

5.281

20~83

25S832...

205D4 205D6 205 D8 205010

25~04 25)06 255D8

1.956

2,150

1.956 1,956

VLS0 ,t.45 o_ _

5.28 7 5.287

1.188 1.53J_

1.879

205E4 20SE6

280EIO

1.188 1.533 1~~" 1.688 1,956

1.879 2.450

205E8 205El0

,. . [,, t"+"' 23/4 ,, 2.891 3.851

2BOEB

250E24

200E32

250E32

280E32

1_¼" l.688 11.956 l¾ " l.688 1,956

2¼" 2.891 3,851

L879

2.450 2.450

5.287 5.287

21.f--21.B f v, ..

"--.WC."'---1-= 41,l.21&

285B12 ~l5LU26...l.5lll l~" 285B16...,2.35-2.61.L1.510 1.¾'.' 4.6l.6-3.551-2\ti"

255816

255D10 255D12 255D16

maw__

285824

4.1>55-a_553 ~•" 1.219

Ya"

l.2l8 3/a" '""""'"°"i""""-+"-""""--1'1"'.,..,l!L l " 28 1.s10 - ·1

lm"

,5.lQ.4¾" ,5.1 0 ~¾"

285016 l~L~.,,946

~5020 _ _4~.52_6 J ,553

2¾"

285D24 _ _ A,§51 0.553 2·W'

28i01

¼J"

3.5;5

7/e''

.,lill4 2j: E6 255E8 2~5E10

205El2 25SE12 20SE16 ~ 1 6 205E20 255E20 205E24 _lliE24 255E32 205E32

L ,3~ ~\ "

285EU2... _

255020

2.J.36.. L2la lt/a."

2~5812

----

1188 1.533

.112 2,_6~ .114 j2.702 .128 2.858

.----

~024 255024 S..287 205032 ' 255Q.32

.S.8.4 l,,55 2.~" .59.9 3.553 2.%" 4.63o1.553 21/4 "

5588.

205D12 205D16 205D20

¼,"

111•·

~.l.218 ¾" 32 ,l.510 l..~" 51.9;L510 1-¼"

255.66.

25~20 2S,5B24.

I 1.819

83 J..218 285AL.0.45.. LB52. .,i.21

255B4

1.879 2.450 2.450 B16 5 - ~ ~ 5B20 5,28J_ __,205B24.

1" l"

280.E 280Eli

255A6 255A8 255A12 255Al6

5.28-7

9 1.533 1 1,8.7 1.533 l.82.9

3.851 280024 I 4 949 2¾ " 2 891 3 851 ~"-+----<I .:._ 2¥.t' ' 2:89l J:85:l 280Q.32

200E24

200El6

p,, ..

280D4 .109 2.110 1" l.188 28006 m1i":"1i6 _r__ 1.188 28008 ~c.....i_..c,•1=2;, 12,2).7 ) .188 280D10 .29 5 2. 741_ 1%" 1,688 280D12 +--'"'-'-'c+"=--,1¾::. \.688 280016 '-=-"--+--"'·3,,,20'-+"2.89~ lW' 1.688 280020 =:....i----1,..:c 4,::,.824 2 " 2.891

28.0E12 2BOt.l~ 280 E.20 280E24

250E20

__ 250E4 2SOE6 250E8 200E8 _ _ 200El0 250El0

3 , 129_

280B2Q..,._ il!!., ~i" 2.891 3.851 280B24 4.945 2¾" 2.891 3.851 _ 280B3.2 7 Z95,1 2a-;," 2.891 3,851

2~020 250024 250D32

250E12

280B16 ~

255A.4

""'-"-- =·2,..1,..e 7/e'' 1,218 I"

285E!,9 ,.I~

~510

r [

l,.SlO 285E20

l.510 3,553 2.¼"

2s~E;~!i.J4L3_.ss3_ 12¾" 285E32 . Q!i_t3,?53 21/•"

Des1g11 details and spec1hcal1ons sub1ect to ch ange without notice Certified drawings available upon request. Information for blank spaces obtainable from factory.

f1i!I''

jl¾" 1%''

~sd

1 ._ .. _ : ~

[C109

E.C.209-8

fill" ~"

106c6

J.l:2.08.J! (C208 JO E.C208J2 F.C~QB 16

Protectiv e Dust Plug and Dust Cap wit h O-ring sea ls are availabl e, made of anod ized aluminum body, stainless pull ring and cab le. Easy to install.

I-U"---4-'""'-'=>'-+

tC2Qe 20 ~C208,2•1

EC208 J2.

l ·I

6 SPECIFIC REQUIREMENT

FUNCTION

ACTUAL LIMITS

Over 2000 Over 3000 No Effect No Effect -No Effect 50 Micron Connected 29 . 711 Hg Connected 29 . 9" Hg Connected 29.7 11 Hg Disconnected 16. 5 Hg Disconnected 7.4 Hg Disconnected

l/4 11 -1/2 11 5/8 11 - l 11 l- l /4''-2 2. Low Temperat ure 72 Hrs . at -65° F. A11 - - 3. Deterioration 24 Hrs . at+1 S0° F.Immersion All 1/4 11 -1/2 11 10 11 Hg Connected 4. Suction 5/8 11 - l 11 1-1/4 11 -2 11 l / 411 - 1/2 11 ( ' Hg Di sconnected

l. Dry Oper ation

50 Operat ions Dry

5/811_7 11 1-1/4 11 -2 11

5. Pressure Drop

0. 18 PSI Max. at 0. 12 GPM

1/4°

0.18 PSI Max . at 0.36 GPM

3/8

0. 18 PSI

ax . at 0.62 GPM

1/2

0. 18 PSI Max. at 1 .51 GPM

5/8

0. 18 PSI Max . at 1. 51 GPM

3/4 11

0.1 8 PSI Max. at 2.9 GPM

7 11

0. 18 PSI Max . at 6. 33 GPM 0.18 PSI ax . at 9.18 GP 0.1 8 PSI Max . at 16.3 GP 200 Hrs . 6. Vibration ---7. Operating 150 to 125 PSI Pres sure --8. Proof Pressure 250 to 400 PSI 9. Burst Pressure

600 PSI

1- 1/2 11

211

All All

A11 All 1;411 _711 11

211

l. Spillage 2. Air Inclus ion 3. Temperature

Ma nu al Ope ration Automat i c Valves

0 PSI Net@ 0.12 GPM 0 PSI Net for All Flows 0 PSI Net @0.36 GPM 0 PSI Net for All Flows 0.045 PSI Net@ 0. 62 GPM 3.0 PSI Net@ 6.0 GPM 0.003 PSI Net @1 . 51 GPM l .5 PSI Net@ 12 .0 GPM (Wa ter 0.002 PSI Net@ 1 .51 GPM 1 .8 PSI Net @ 16.0 GPM (Water 0.0085 PS I Net@ 2.9 GPM (Fuel) 3.45 PSI Net @ 29 .0 GPM (Fuel) 0.018 PSI Net@ 6.33 GPM 0.055 PSI Net@ 9.18 GPM 0.085 PSI Net@ 16 .3 GP No Effect 0 to 500 PSI Normal (May be us ed to 75% of actua l Burs t) J 750 PSI

1-1/4 11

h-,14 - 1-112 10. Design

A11 A11

2000 PSI Coupled 1250 PSI Socket 1250 PSI Nipple 1100 PSI Socket 1100 PSI Nipple 800 PSI So cket 800 PSI Nipp le Conforms Conforms

0.077 CC Per Disconnection 0. 0092 In.3 Per Connection -65° to +275° F. (+450° F. for LEC200 Series)

QUICK DISCO NECT

Hydraulic, Pneumatic,

6000 SERIES INST-0-MATIC COUPLING Full flow in either direction.

Positive self-sealing poppet valves

Fuel and other Fluid Systems

Disconnects under pressure with low spillage.

SIZES Available line size from

¼" to 2"

DESIGN VARIATIONS The 6000 Series 1s the basic design, spee11cally engmeered !or use m hydraulic/pneum atic sys le ms with operating pressure up to 3500 PSI (through l''). Variations of the basic lnst-O -Matic design are also available to meet a more specific requirement The Wigg111s 6000 Series Inst-O-Matic 1s a quick connect, quick disconnect, light weight self-sealing fluid connector of aircraft quality. It features the unique dog latching design which provides a positive connection and prevents brinelling of nipple, and also an en ry seal which prevents external leakage during connection. InstO-Mahc is double sealed for Zero- eakage.

OPEN CONNECTOR To be used when lluid loss is unimportant, when pressure need no be maintained or v1ben contamination ts allowable.

POST-ACTUATED

MATERIAL The nipple bo y 1s a combination of stainless steel and aluminum, up to l' size. From I¼· thru 2', nipple is all luminum . Socket is basically aluminum alloy. Variations m the coupling m terial and seal compounds are available for compat1b1hty and specific applications A star! of engineers in the held and at the I clory specially quah:ied in the application of Wiggms couplmgs to modern fluid systems 1s avmlable to assis you in selecimg the nght couplmg for your specific applicaUon . Tn order lo select the best con nectar, the lo llowing information is necessary: (1) size, (2) end H ting type; (3) fluid. ( fluid tern eralure, (5) ,peratmg pressure.

J.\DEL WIGGINS GID:·r-

To be used only wl--ien one hall ol the connection (either soc e or nipple) 1s sell seolmg The pos m the open .ol actual s he valve of the sel -se lino mating hall

BREAKAWAY(socket only.open or valved ) To be used when breakaway is required The socket is llanged in the actuating ring for mounting. When the nipple is pulled

away 11 forces the socke t body to actua e the locking mech nism o en, thus breokina he connec1on.

PERFORMANCE REVI EW / COMPAR ISON

IN ST-0-MATIC COUPLINGS

FUEL, OIL AND OTHER LOW PRESS URE SYSTEMS

APPLICABLE SPECIFICATIONS MIL-C-7413A

Couplings, Quick Disconnect Automatic Shut- off

This specification covers the general requirements for automatic shut-off, quick disconnect couplings for fluid l i nes .

MI L-F-86 l 5A

Fuel System Components; General Specification for

This specification covers the requirements for aircraft fuel system components.

FUNCTION

l. Dry Operation 2. Low Temperature 3. Deterioration 4. Suction

SPE CIFIC REQU IRE MENT

SIZE

-----t-

50 Operations Dry

ACTU AL LIMITS

1/4 -1-1/4 --------!-A11 72 Hrs . at - 65° F. All Immersion (24 Hrs. at 150° F.) -'------+---10" Hg Connected 1/4" 6" Hg Disconnected 10" Hg Connected 3/8" 6 11 Hg Disconnected 10'' Hg Connected l /2" 6 1' Hg Dis connected 10" Il g Connected 3/4" 6" Hg Disconnected 10'1 Hg Connected 6 Hg Disconnected 10" Hg Connected 1-1/4 11 6 Hg Disconnected . 18 PS I max. at . 12 GP 1 1/4 11 11

S. Pressure Drop

6. Endurance

7. Operati ng Pressure

.18 PSI Max. at .36 GPM

3/8"

.18 PS J max. at . 62 GPM

1/2"

.18 PSI max . at 1.51 GPM

3/4"

. 18 PSI max. at 2.9 GP M

. 18 PSI max. at 4.75 GPM 200 Hrs. Vibration At operating flo1·1 & temperature after 3 days shelf aging &including a minimum of 10 disconnections and final pressure tests. (160° F. for fuel, 375° max. for oil) 50 to 125 PS I

1-1/4"

250 to 40 PSI

600 PSI

1/4" - 1"

1/4" 3/8"

1/2 11 3/4"-l"

10. Design

Manual Ope rat i on Automatic Va l ves Visual Indicator

All All All

--------

No Effect -----29" Hg Connected 15" Hg Disconnected 27" Hg Connected 15 " Hg Disconnected 27" Hg Connected 10" Hg Disconnected 27 11 Hg Connec t ed 7" Hg Disconnected 27" Hg Connected 511 Hg Disconnected 27" Hg Connected 2" Hg Di sconnected (.03 PSI at .12 GPM) 2.6 PSI at 1.2 GPM ( .06 PS1 at .36 GPM) 4 PSI at 3.5 GPM (.15 PSI at . 62 GPM) 3.9 PSI at 6 GPM (.06 PSI at 1.51 GPM) 3.7 PSI at 16 GPM 7. 1 PSI at 29 GPM

- O to

1/4 11 - l 11

1-1 /4"

9. Burst Pres sure

Over 5D

-----------No Effect

Conforms to all phases of test procedure.

All

1- 1/4"

8. Proof Pressure

3350 PSI (Norrnal) D to 500 PS I ( Norm a1) 5250 PSI (Normal - May be used to 75% actual burst) 750 PS I (Normal - May be used to 75% actual burst) 13,SOO Actual 12,500 Actual 12,000 PSrG 8,750 Actual 4,000 PSI Conforms Conforms (Locked when dogs covered)

PERFORMANCE REVIEW / COMPARISON

INST-0- MATIC COUPLINGS

HYDRAULIC, PNEUMATIC AND OTHER HI PRESSURE SYSTEMS

_ ABLf SPf MIL-C-25427A

Coupling Assy, Hydraulic Self-sealing, Quick Disconnect

This specification covers the detail requirements for aircraft hydraulic self-sealing quick disconnect co uplings f or use in Type I and Type II hydrau lic systems as defined by Spec MIL-H-5440.

MIL-H-8775

Hydraulic System Components, Aircraft; General Specifications

This specification covers general requirements that are common to a l1 hydraulic components used in aircraft hyd rau lic systems conforming to Spec MIL-H-5440.

for

MIL - C-5502

Couplings; Aircraft Hydraulic Self-sealing

MIL-E-5272

Environmental testing , Aeronautical and ass ociated equipment , General Specifications for

SPECIFIC REQUIREMENT

FUNCTION

1. Extreme Temperature

-65° to +275° F.

2. Proof Pressure

4500 PSI

3. Leakage Low /High Press. 4. Pressure Drop

5. Vacuum

This specification establishes the requirements for self-sealing couplings for use in aircraft hydraulic systems. This specification establi shes uniform procedures for testing aeronautical and associ ated equipment under simulated and accelerated climatic and environmental conditions .

one 8 -PS- 18 PSJ 8 PSI 8 PSI 8 PSI

_=]

Ma_x___ at Max. at Max. at Max. at Max. at

1.2 GPM 3.5 GPM 6 GPM 16 GP~ 29 GPM

l O" Hg Gage Coup 1ed l 0 Hg Gage Coupled 6 17.5 30 80 145

GPM GPM GPM GP GPM

( lOO (100 (100 (100 (100

times times times times times

each each each each each

11. Fluid Loss

.05 Cu. In. Max.. 12 Cu . In. Max. .20 Cu. In. Max. .70 Cu . In. Max. . 90 Cu. £n. Max. . 5 CC '1ax. 1. 30 CC Max. 2. 20 CC Max . 8.20 CC Max . 9.0 CC ax.

---

5250 PSI (Normal) May be used to 75% of actual burst None

Al 111

1/4 3/8" l /2"

3/4 11 1"

5. 3 at 1 .2 GPM 5.4 at 3.5 GPM 5. 1 at 6 GPM 6 PSI at 16 GPM 7.4 PSI at 29 GPM

1/4" 29" Hg Gage Coupled _ _ _ 3/8'_'-_l_"+-2_7" Hg Connected _ _ __ direction) l/4" O.K. direction) 3/8" O.K. direction) 1/2" O. K. directi on) 3/4" O. K. di rec ti on) l " 0. K.

1/4"

7. Impulse/Vibration(4500 PSI 50 Hours 3/8"- l" Peak/Resonant Point ) ---8. Endurance 200 Operations All Operate at 60 _P_S_l _ _ _ _ _ _ _1 1/4" 9. Manual Opera t ion 3/8" 1/2" 3/4" l" 10. Air Inclusion

ACTUAL LIMITS

1/4"~~" -65° to 275° F. (Dependent on ~PL Seals) All

6. Surge Flow

SIZE

50 Hours 75 Hours at 2250 PS I Peak 200+ 15# 18.5# 22# 45# 85#

--------1 1/4"712

Force Force Force Force Force

3/8" 1/2" 3/4" 1"

:066 .21 .43 . 96

1/4" 3/8" 1/2" 3/4" 1"

.3 cc l . 13 CC 3.2 cc 6.73 cc 15.0 cc 0. K.

12. Impact

20G/l 2 Times

All

13. Burst Pressure

7500 PSI

1/4" nJ,500 PSI 3/8'' 12,500 PSI l/2" 12,000 PS I 8,750 PSI 3/4"- l"

to to to to to

Connect Connect Connect Connect Connect

Design details ancl specifications subject lo change without notice. Certified draw ings available upon request.

HOW TO ORDER

s PART NO. WITH

SIZE

WEIGHT LBS .

MSl36SS

PLUG

0 C K E T

PA RT NO. WITH MS336SI

PART NO. W/ MALE

WE I GHT LRS .

ANPr

WEIGHT LBS.

P~RT NO . W/ FEMALE

WEIGHT LBS.

ANPT

PART NUMB ER

6000D 6000D 6000D 6000D

4 6 I, 2 " 8 5/a" 10 W' - 600 □ 0 12 l /4tr

c:==-

31,"

l'' l \'4'' P~ " 2"

60000 6000D 6000D 60000

16 20 24 32

.092 .164 .207 .415 .422 .594

600 0A 4 .0_97 6000B 4 6000A 6 .164 6000B 6 6000A 8 .205 60008 8 6000A 10 408 60008 10 6000A 12 .413 60008 12 6000A 16 .594 60008 16 6000A 20 .615 60008 20 - -6000A 24 1.30 60008 24 6000A 32 2.47 6000B 32

6000E 4 .097 6000E 6 .173 6000E 8 .221 6000E 10 .445 6000E 12 .458 6000E 16 .6 37 6000E 20 .681 -6000E 24 1.40 6000E 32 2.66

.616

l.32 2.50

.103 .174 .223 .435 442 .625 .675 - 1.35 2.60

WEICHT LBS .

-·-···

6009-4 6009-6 6009-8 6009-10 6009-12 6009-16 6009-20 - 6009-24 6009-32

.023 .036 .056 .077 .077 .159 .225 .380 .540

I ,....,

TTo -

---

Hex.

D I M EN ¼" ¾" II. Ir ,2

o/s"

¾" l" l1A1" I½" 2"

.66 .70 .80 1.00 1.00 .92 .70 1.30 1.35

2.05 2.48 2.60 3.22 3.22 3.39 3.33 4.57 5.65

SIZE-

¼"

3/s" ½" 5/a" ¾" l" P"'i "

HEX .

s 0 1.513 1-9/ 64 1-25/ 64 1.735 1-33/ 64 1.838 1-57 / 64 2.260 1-57 / 64 2.260 2-17 /64 2.166 2-33/ 64 2.020 -~ 3-1/ 64 3.043

13/16 11/s 1¼ 15/a

4-1/64

I 0 N

,...., - :,_

:'r if ';ih'•,. :

;

3.524

2 2¼ 25/a

31/2

CAP

PLUG

1.200 1. 499 1.560 1.931 1.931 2.140 2.009 2.840 3.460

PART NO. WITH MS33656

WEIGH T LBS .

6005D 4 -60050 6 60050 8 60050 1D 6005D 12 60050 16 - 60050 20 60050 24

I soos □ 32

PART N0. WITH MS33657

.050 6005E .124 GOOSE .158 6005E .346 GOOSE .359 GOOSE .625 6005E .424 6005E .656 GOOSE 1.44 '6005E t-

WEIGH T LBS.

PART NO. W/ MALE ANPT

MAX.

NIPPLE

1-1/ 64 1-17 / 64 1-25/ 64 1-49/ 64 1-49/ 64 2-9/ 64 2-17/ 64 2-49/ 64 3-45/ 64

2.076 2.300 2.429 2.806 2.806 2.896 2.580 3.653 4.210

.984 1.217 1.395 1.735 1.735 2.056 2.260

1.632 1.959 1.991 2.434 2.434 2.728 2.506

---

N I p p L E

lW ' 2"

SOCKET

l ~

CONNECTEO SI ZE

L ENGTH REOUIRED TO COUPLE OR UNCOU PL E

13500 12500 12000 9500 9500 8750 4000 3000 4000

~ 11·--I ,,

~--'

DUST CAP WEIGH T LBS.

PART NO . W/ FEMALE ANPT

4 .052 60058 4 .054 6005A 4 6 .131 6005A 6 .128 60058 6 8 .175 6005A 8 .163 60058 8 -t-tI- 10 .380 6005A 10 .344 60058 10 12 .355 60058 12 .393 6005A 12 - 16 .656 6005A 16 .625 60058 16 20 .437 60058 20 .490 6005A 20 24 .664 6005A 24 .633 6005B 24 32 1.48 6005A 32 1.43 60058 32

WEICHT

LBS.

.060 .139 .179 .370 .384 .650 .480 .683 1.436

PART NUM BER

6008-4 6008-6 6008-8 6008-10 6008-12 6008-16 6008-20

WE IGHT

LBS .

.025 .033 .038 .049 .049 .061 .066

ITT

UJ.

ITT

UICK DISCONNECT

GENERAL PURPOSE COUPLING

POL SERIES MEDIUM PRESSURE

FLUSH VALVED

• MINIMUM SPILLAGE

• FULL FLOW

• MINIMAL AIR INCLUSION • MINIMUM PRESSURE DROP

• HEAVY DUTY

SOCKET/ NIPPLE CONNECTED

SOCKET

NIPPLE

FEATURES FLUSH VALVING: Minimize entry of air or contamination into system during connection. Reduced fluid loss during disconnection prevents damage and contamination of surrounding equipment.

LOW PRESSURE DROP: Blended flow areas provide smooth, low pressure drop flow in either di rection. Typ ica l pressure drop with fue l is 2.3 psig at 50 gpm.

DOG LATCH: The proven , rugged dog latch mechanism provides a reliable connection. Connection is fast and sure. Disconnection is fool-proof under all conditions by retracting the actuating ring.

J.\DEL

WIGGINS Grn;·r-

SIZES: The ll/4" body size is provided with l", 11/<1" and l½" end fittings as standard. Other end sizes available on request.

END STYLES: MS33656 and MS33657 end styles are standard. Pipe threads and other styles are available on request.

PRESSURE RATINGS: Operating Pressure Proof Pressure Burst Pressure

500 ps ig 750 psig 1250 psig

SEALS: Uses standard "O" rings for all seal s. Standard unit uses a fuel resistant Buna N material other seals available on request.

RDE

POL SER IES

SOCKET

- ITT

r--1

With Lanyard

CONNECTED

-- -

r-- -

_ .J._ -

- 3. 140

. ..L

1-- -

~ 3.3~2YJ

L-- -

I..---

4. 657

....J.Jr~ I

~ E

MS 336 77 (/\ND l 0077) Description : Filting en d, standard dimensions for taper pipe thread for use on AN standard parts

END TYPE

dime nsion for pipe th re ad.

Socket as sernb 11 es (aluminum) SELF-SEAL ESTIMATED END WEIGHT PART NO. SIZE

N1ppIe assemoI1es (Al urni num) SELF-SEAL ESTIMATED PART NO. WEIGHT

l" 1 1/ 4" l l /2 11

POLS1Al6 POLS 1A20 POLS1A24

l. 30 l. 32 l. 33

POLN7Al6 POLN1A20 POLNlA24

0.60 0.62 0.63

711

l. 36 l. 38 l. 39

POLN 7816 POLNlB20 POLNlB24

0.66 0. 68 0.69

1 l / 411 l 7/2' '

POLS 1B 16 POLS 1B20 POLS 1B24

l II l l / 4" l l /2"

POLS1Dl6 POLS1D20 POLS1024

1. 30 l. 32 1.34

POLN1Dl6 POLN1D20 POLN1024

0.60 0.62 0.64

l" 1 l / 4'' l l / 2"

POLS1E16 POL S1E20 POLS1E24

1. 37 l. 39 l. 42

POLN1El6 POLN1E20 POLNlE24

0.67 0.69 0.72

WIGGINS • • • • •

Descript i on: Inte rna l - standard

M533657(AND10057)

MS)365G ~ S~O O~ Des c r i ptfon: Fitting end, standard dimen s ions for flare,1 tube con nection & gasket s.ea 1.

Oes~ription: Fitting end, stand-

ard di rnensi ons for bulkhead fl ared t ub e connection .

NIPPLE

,-- --· I

I -- -

·-

l-2.904-J CAP ASSEMBLIES

POL 11 COUPLINGS ARE AVAILABLE WITH:

"Self-Seal" socket and nipple (both). VALVED ''Open"socket and nipple (both). VALVELESS For open (valveless) Type, change "1 11 to "2" in P/N eg; POLSfAl6 For CRES material, change "P" to 11 C11 in P/N eg; COLS2Al6 For Lanyard on actuating ring, add suffix 11 L11 to-P/N CAP AND PLUG ASSEMBLIES ARE AVAILABLE; MADE OF ALUMINUM BODY, STAINLESS PULL RING AND CABLE; EASY TO INSTALL. SIZE

DUST CAP PART NO.

PRESSURE CAP PART NO.

DUST PLUG PART NO.

All

POLC20

POLC4-2 0

POLP20

PLUG ASSEMBLY

UIC

DISCON EC

Electronic Cooling, Instrumentation, Testing

20 SERIES MIN-0-MATIC COUPLINGS Fu ll hex for eas ier

Spring forc e plus pressure

wrenching ~

locking ring

Full hex for easier /

ens ure seal

MS33656 or MS33657 standard ends

MS33656 or MS33657 Pressed -on valve se al reta i ner

Valve post protected when disconnected

Seals on nipp le before valves open

NIPPLE

BN20E4

wrenchrng

N • (nipple)

standard ends

SOCKET

BS2004

E - (MS33657) 4 (¼" part with 1/4" end fitting)

S (socket) D · (MS33656) 4 ('/4" pa rt with '/, " end fittrng)

Description-Wiggms 20 Series is a miniature, ligh -weight, selfsealing, quick-connect, quick-disconnect, fluid connector for both commercial and military applications. lt is particularly sui ed for electronic cooling applications, etc. Size: 1/4 " with 1/4 " ends, 1/8 " and 3/a" are available upon request. Weight: .064 LBS. (Connected) • Material: Aluminum alloy . Seals: Viton "A" seals. Various elastomers available on request. Pressure: Actual Burst 13000 PSI. • Temperature: From -20 °F. to 400° F. • Part Numbers: See chart reverse side. Operation - Push to connect. Pull to disconnect. One single, simple motion. No twist required. Applications (typical) Electronic cooling. Cooling for klystron , magnetron, electronic guidance packages. Test Stands, Instrumentation and Sensing Lines . Advantages • Small size • Light weight • Low pressure drop. • Proven latching concept • Simple push-pull operation to connect and pull to disconnect • Interchangeable components to facilitate maintenance: ends, valve retainers, end seals. springs, valves. • No twisting to latch or disconnect • Full-width hex makes easy torquing of end fittings .

/,\DEL WIGGINS c;rr:,:·r

20 SERIES act ual size

MS33657-4

MS336 56- 4

i . 68

,....--,

( I.._ ~

' - - --

1.24• - --

. 1.24

SOCKET SIZE

BURST PRESSURE

PART NUMBER

END TYPE

WEICHT (LBS.)

DISCONN.

CONN.

PRESSURE DROP

SPILLAGE

8$2004

MS33656-4

.035

8,300

13,000

.9 PSI AT .5 GPM

.22

.21

c.c.

8S20E4

MS33657-4

.040

8 300

13 000

.9 PSI AT .5 GPM

.22

.21

c.c.

¼"

AIR INCLUSION

5/ 8" HEX

20 SERIES MIN-0-MATIC COUPLINGS

>---

- --

1.ao• _

_ _____,

Design deta ils and spec ific ations subJecl to change without noti ce . Cert 1f1ed drawings availab le upon request.

MS3365 7-4

1.1 3"

[_ SIZE

NIPPLE PART

BURST PRESSURE

AIR

END TYPE

WEICHT

NUMBER

(LBS.)

OISCONN.

CONN.

PRESSURE DROP

SPILLAGE

INCLUSION

BN20D4

MS33656-4

.019

8,300

13,000

.9 PSI AT .5 GPM

.22 C.C.

BN20E4

MS33657-4

.024

8,300

13,000

.21 C.C. .21 C.C.

¼"

.9 PSI

.22

AT .5 GPM

c.c.

ICK DI C

30A SERIES CONNECT-O-MATIC COUPLING Sp r ing force plus pressure act Lo I ns ure sea l.

Pos ,t, ve dog -locking mechanism .

Hydraulic, Pneumatic, Fuel and other Fluid Systems

L~l~'

Dogs l oc k on nippl e

lo,

"°''""' loc k

' \

Minimum pr essur e drop

VVVV'-

Pos1t1ve se lf -sea li ng val ves .

The Wiggins 30 A Series Connect-O-Matic Coupling is a quick disconnect, quick connect type connector suitable for a wide variety of fluid applications. It features the unique Wiggins dog latching design which provides a positive, dependable connection without "brinelling" of the nipple.

Connect-O-Matic operation allows a simple push to conned, and a straight pull on the actuating ring to disconnect, one single, simple motion. No twisting , no separate movement required to lock or unlock the latch mechanism . Flush Valving provides a m1rumum of spillage during disconnection plus positive sealing of both halves when disconnected. Mini mum air inclusion during connection is an added feature of flush valves. Pressure Drop is kept to a low value with smooth , open flow passages when coupling halves are connected. Burst Pressures are tabulated on Page 2 ±or use in coupling selection. Maximum allowable operating pressure depends on type of service, safety factor and other operating criteria. Seals are all standard a-ring sizes. The standard synthetic rubber seal material may be used with most common fluids. Various other seal materials are also available on order for compatibility with special requirements.

FAST Push-it ' s connected Pu 11- 1I's di sconnected

A Relief Valve is available on order as part of the standard valving to provide for thermal relief when disconnected. This eliminates the need for a special bleed valve or thermal relief valve in the system. ADEL WIGGINS Gr,::,:-r,

s S llE

WE IGH T LBS.

WITH

MS33656

¾ ½ %

:Y4

PLUG

0 C K E T

PART NO ,

YS30AD4 YS30AD6 YS30AD8 YS30AD10 YS30AD12

PART NO . WITH MS336SJ

.250 YS30AE4 .421 YS30AE6 .572 YS30AE8 .900 YS30Af10 .943 YS30AE12

WE IGHT LBS .

PAR T NUMBER

.255 .430 .614 .930 .982

YPJ0-4 YP30-6 YP30 -8 YP30-10 YP30-12

WE IGH l LBS.

s ----l L~NG fH ~EO U I RED TO

30A SERIES CONNECT-O-MATIC COUPLING D I M ENS I 0 N S CONNlCTED

~ ¾

.7 10 .771 ,900 1.040 1.062

2.075 1.625 2.452 1.750 2.660 1.952 3.1 95 2.140 3.265 2.265

HEX .

s 1.638 11/e 1.702 He 1.929 1% 2.236 15/a 2.261 13/e

1.049 1.420 1.541 1.889 1.953

CAP

PLUG

,--i-

MAX .

NI PPLE

SOC KET

COU PLE OR UNCOUPLE

z u ~__,,,-."--

.OOEl

BURST PRESS. PS I

Des ign detai ls and specif ications subject to change w i thout notice . Certified draw in gs ava ilab le upon request.

DUST CAP

N I P P L E PUT NO .

SIZE

--- p

WITH MSJ365 7

l 08 1.245 1.110 21 41 1.355 2 .0 0 1. 3 l 2 2 . 3 5 5- 1 .s 5 7 2.2 0 -r----r----l-1. 531 2.5 36 1.7 76 2.592 7500 1.627 2 ~566 1. 870 2 .615 7500-

WEIG HT LBS.

PART NO . WITH MS33 6~

WE IGHT LBS.

t= L

_I~

UICK

ON ECT

1 nstru m entation Pressure VS100 AND vsno SERIES MIN-O-MATIC COUPLINGS Testing Flanged or standard actuating ring

Po•ltlve dog-lockin11 mechanism

Positive sealins

Available wlth ot

c:�,------...._,---'---

,_,,_,,. w'" ., • o, ¾• .. ,�,...,.------ (900 Elb<)w End

Aut.omabc: Pu:sh 10 connect Pull to dis.connecl

Ava,tabre wtth ¼ i, or '¾• e.nds:. (90 ° Elbow End Fittlnl!• also.)

Description - Wiggins VSlOO and VSllO Series is a miniature, full y automatic, quick-connect, quick disconnect, self-sealing, fluid coupling designed for minimum envelope and weight, and is primarily used for pressure-sensing applications. It is the miniature version of Wiggins' unique "dog-locking" Connect-0-Matic. Size:

l/4" line size (nominal) available with 1/8", ¼", and 3/8" ends

Material;

Light-weight oluminum

(Anodized)

100 Series (with valve)

llO Series ( without valve)

Operating pressure:

1500 psi

5000 psi

Proof pressure:

2200 psi

7500 psi

Burst pressure:

3750 psi

Temperature range: Weight:

17000 psi 65 °

Socket - .076 � Nipple - .025

Seals:

F. ta +400 F. °

. Typ1ca 1

Standard seal in VS/VN 100 and 110 Series is Silicone. Other types of seals in the 110 Series are available upon request.

Operation - Push to connect. Pull to disconnect. One single motion. No twisting required. Applications ( typical) • Instrumentation lines • Pressure-sensing lines • Electronic cooling lines • Airerait flight-data recorders (Aeronautical Radio, Inc., approval) • Test stands • Fluid he at exchangers.

VS100 and VS llO actuel s12e

Advantages • Small size • Light weight • Designed for reliability • Simple push-pull operation to connect and disconnect • Ideal for use in blind locations • No turning to latch or disconnect • Full- width hex to apply torque to end fittings. /,\DEL

WlGGINS Cir,,-,:·r,

STANDARD

SOCKET PART NUMBER

TYPE

WITH VALVE

STANDARD VS10004 90° ELBOW VS100D4-90 ° VB10006A FLANGED

1.510 max. 2.075 max. _ _ _ _· 1_2.... sH

90" ELBOW

FLANGED

VSl 1004

vs 11004-90° VB110D6A

LBS.

MS33656-4 MS33656-4 MS33656-6

.076 .086 .076

max .

13s

.825

max .

max.

--1.875 max.

-1.515 2.086 max.

.562

1 l.557max.

END TYPE

OPEN

l .720 d i a.ho l e

typ . 4 Plcs. Design detai Is and specifications subject to change without notice .

VS100 AND

vsno

SERIES

MIN-0-MATIC COUPLINGS Certified drawings available upon request.

NIPPLE PART NUMBER WITH VALVE OPEN

TYPE

UID

STANDARD VN100E4 VN110E4 90° ELBOW VN100D6A-90° VN110D6A-90° FLANGED VF10004 VF11004

90" ELBOW

. 7 6 9 ::!_f- . I 25 max.

•- - 1 . 1 3 5 - -

max.

WT. tBS.

Ms-33~55~7--4 ---' .025 .034 MS33656-6 .068 MS33656-4

FLANGED

1 . 350 max.

TYPE

. 815

QUICK DISCONNECT

PRESSURE RE-OIL

"WF" SERIES INST-0-MATIC COUPLING

WlF8 Pressure servicing of jet engine oil tanks became necessary with Century Series aircraft both for reduced turn around time and because tanks were buried within structure for aerodynamic reasons. The Wiggins WlF8 and W4Fl2 series were designed specifically for pressure servicing, adapting the proven Wiggins dog latch to the design specified by Military Standard 24476. The nozzle (socket) and adapter (nipple) are q ualified in accordance with Military Specification MIL-N25677 (USAF) and MIL-A-25676 (USAF) respectively.

OPERATION To connect puU nozzle (socket) actuating ring back and push nozzle onto adapter

(nipple). Release actuating ring after initial insertion and hear the actuating ring snap forward when the dogs drop into the groove. No twisting required To disconnect pull on actuating ring No twist requ1red.

The WlF8 is the ½" series for pressure servicing of the oil tank while the W4Fl2 is the ¾" series for overflow return indication. A complete·senes of pressure caps and dust caps and plugs are included.

W4Fl2

NOZZLE ADAPTERS (REF. MIL-T-38266A PARA. 3.8) Certain aircraft have standard Wiggins Inst-O-Matic nipples (adapters) installed for oil servicing and cannot be serviced with the QPL Military Standard assemblies. Specifications MIL-T-38266A for the PMU- 29/ E tank and pump unit provides for special adapters to allow servicing for all jet aircraft. These adapters are supplied by Wiggins and are described below. 8000W17F8-Adapts the Wl FB-1 nozzle (MS 24475-1) to a standard Wiggins nipple such as

G8005El2.

/,\DEL WIGGINS Cm:'fl

8000W17F12 - Adapts the W4F12·1 nozzle (MS 24475-2) to a standard Wiggins nipple such as G8005E12.

W18F8 -

Adapts the W1F8-1 noz.zle (MS 24475-1) to serve as a simple open nozzle for filling through a standard tank fi I !er tube.

SIZE ½" PRESSURE SERVICE DESCRIPTION 2. 00

NIPPLE (Adapter) SOCKET (Nozzle) PLUG SOCKET & PLUG DUST CAP NIPPLE & CAP PRESSURE CAP

WlFS Socket/Nipple connected

PART NUMBER MS

WIGGINS

24476-1 24475-1

W1FB·2 W1F8·1 WlFB-4 W1F8-5 WlFB-3 WlFB-6 W1F8-8

24480-1

J. 0? I . 13 l\

''j - 1

. J_J~JL . ,Ii· I: ., 'I

' ., ··- tJ~

1!/

Design details and specifications subject to change without notice. Certified drawings available upon request. i - - -- - 3 .44-----,

SIZE ¾" OVERFLOW RETURN 2 118 1£X.

2.44

W4F12

DESCRIPTION NIPPLE (Adapter) SOCKET (Nozzle) PLUG SOCKET & PLUG DUST CAP NI PPLE & CAP PRESSURE CAP

PART NUMBER MS

WIGGINS

24476-2 24475-2

W4F12-2 W4F12-1 W4F12-4 W4F12-5 W4F12-3 W4F12-6 W4F12-8

24480-2

Socket/Nipple connected

d..

•:-

2. ~,

Frangible Connectors

a Available in Sizes: a¼” to 1½” a Material: Stainless Steel a Burst pressure: 600 psig a Pressure Drop: (¼ size) a 0.18 psi @ 0.12 gpm a Operating Pressures: a0 to 500 psig

a Prevents loss of critical system fluid a Shear Pins and Bending Failure Section for Frangible functions a Should either Torsional or Tension elements fail Flow through the coupling is immediately Stopped a Especially effective in preventing loss of Hydraulic fluid on landing gear due to tire failure a Current Applications: ` Helicopters ` Boeing 757 (all Models)

ADEL

WIGGINS GROUP

DEL

Other Products

IGGINS GROUP

Adel Clamps The Adel name is synominous with clamps. Offering the most complete line of clamps and line supports, AdelWiggins Group products are unsurpassed in variety and performance. •Loop Clamps •Saddle Style Clamps - Designed for Heavier loads •Multiple Line Supports •Block Clamps - For quick line removal in limited space •Clamshell Wearsleeves

LATCH ASSEMBLY

Tube Connectors BONDING WIRE

For over thirty years, AdelWiggins Group has designed and produced flexible tube connectors for the Aerospace industry. Used in many applications for fuel lines to bleed-air ducting, AdelWiggins Tube Connectors can be found on most of the worlds aircraft. Features Include: •Compact Size •Light Weight FERRULE FERRULE

•Accommodate misalignment •Available in Aluminum, Stainless Steel and Titanium

Heaters and Bulk Hoses Adel Wiggins Group produces a complete line of Heated Assemblies and Devises, including: •Heater Blankets •Heater Ribbons for water lines •Heater Cuffs •Heated Manifolds •Immersible Heaters •Heated Nipples •Gasket Heaters •Panel Heaters •Water Heaters •Heated Hoses •Thermostats

About

ADEL WIGGINS GROUP

Founded in 1925 by E.B. Wiggins, the AdelWiggins Group has grown from a humble oneman operation to a Global business with annual sales of over $45 Million. Today, AdelWiggins products are flying on every Aircraft produced in the Western World. With over 7,000 designs, AdelWiggins has a product to meet your application needs.

The AdelWiggins Factory in Commerce California

AdelWiggins Group

, . ADEL WIGGINS GROUP

5000 Triggs Street Los Angeles, CA

90022

Telephone: (323)269-9181 Fax:

(323)269-3759

A Division of