IEM Jurutera Jun'20 Issue

ELECTRICAL SAFETY 2020

JUNE 2020

Print Service

romotion Until 30 September 2020 Flyer / Leaflet Art Paper (Full Color)

A4

A5

FLYER MOCKUP Lorem Ipsum is a pseudo-Latin text used in web design, typography, typesetting, and printing instead of English to emphasize design elements over content.

105gsm 500pcs 1000pcs

130 RM160

128gsm 500pcs

RM

1000pcs

160 RM190

105gsm 500pcs

RM

1000pcs

100 RM130

128gsm 500pcs

RM

1000pcs

For other quantity and material, please contact: Joseph How Shirley Tham

RM

(+6) 011 1234 8181 (+6) 016 283 3013

130 RM160

Print Service

romotion Until 30 September 2020 Business Card - 54mm x 90mm Gloss / Matt Art Card (Full Color)

260gsm 200pcs 300pcs

40 RM 50 RM

310gsm 200pcs 300pcs

For other quantity and material, please contact: Joseph How Shirley Tham

(+6) 011 1234 8181 (+6) 016 283 3013

50 RM 60 RM

36.5° C

Hikvision Temperature Screening Solutions

36.3° C

36.7° C

Contribute to safer working environment and normal operation of businesses 1

Flexible Temperature Screening

2

One second per person detection Non-contact measurement Flexible deployment with optional tripod

Thermographic Cameras

Temperature Screening with Access Control & Security Check

Touch-free temperature measurement with access control High-efficiency measurement and detection Centralized and traceable data management

Tripod

Monitoring Tablet

MinMoe Temperature Screening Terminals

Metal Detector Door

*Designed for the preliminary screening of elevated skin-surface temperatures HIKVISION (MALAYSIA) SDN. BHD. 301, Level 3 of Menara LGB, No. 1 Jalan Wan Kadir, Taman Tun Dr. Ismail, 60000 Kuala Lumpur T +60327224000 F +60327224022 Sales Email: sales.my@hikvision.com

@HikvisionMalaysia

@HikvisionAPAC

R

@HikvisionAPAC

www.hikvision.com

JURUTERA Number 06, JUNE 2020

IEM Registered on 1 May 1959

contents

MAJLIS BAGI SESI 2019/2020 (IEM COUNCIL SESSION 2019/2020)

YANG DIPERTUA / PRESIDENT Ir. David Lai Kong Phooi TIMBALAN YANG DIPERTUA / DEPUTY PRESIDENT Ir. Ong Ching Loon NAIB YANG DIPERTUA / VICE PRESIDENTS Ir. Prof. Dr Norlida bt Buniyamin, Ir. Prof. Dr Jeffrey Chiang Choong Luin, Ir. Ellias bin Saidin, Y.Bhg. First Admiral Dato’ Ir. Ahmad Murad bin Omar, Ir. Dr Tan Chee Fai, Ir. Hj. Mohd Aman bin Hj. Idris, Ir. Dr Wang Hong Kok SETIAUSAHA KEHORMAT / HONORARY SECRETARY Ir. Mohd Khir bin Muhammad BENDAHARI KEHORMAT / HONORARY TREASURER Ir. Chen Harn Shean BEKAS YANG DIPERTUA TERAKHIR / IMMEDIATE PAST PRESIDENT Ir. Dr Tan Yean Chin BEKAS YANG DIPERTUA / PAST PRESIDENTS Y.Bhg. Academician Tan Sri Datuk Ir. (Dr) Hj. Ahmad Zaidee bin Laidin, Y.Bhg. Dato’ Ir. Dr Gue See Sew, Y.Bhg. Datuk Paduka Ir. (Dr) Hj. Keizrul bin Abdullah, Y.Bhg. Academician Tan Sri Dato’ Ir. Emeritus Prof. Dr Chuah Hean Teik, Ir. Choo Kok Beng, Y.Bhg. Dato’ Ir. Lim Chow Hock WAKIL AWAM / CIVIL REPRESENTATIVE Ir. Dr Lee Yun Fook WAKIL MEKANIKAL / MECHANICAL REPRESENTATIVE Ir. Fam Yew Hin WAKIL ELEKTRIK / ELECTRICAL REPRESENTATIVE Ir. Lim Kim Ten WAKIL STRUKTUR / STRUCTURAL REPRESENTATIVE Ir. Dr Ng Soon Ching WAKIL KIMIA / CHEMICAL REPRESENTATIVE Ir. Prof. Dr Lee Tin Sin

WAKIL LAIN-LAIN DISPLIN / REPRESENTATIVE TO OTHER DISCIPLINES Ir. Dr Bhuvendhraa Rudrusamy WAKIL MULTIMEDIA DAN ICT / ICT AND MULTIMEDIA REPRESENTATIVE Ir. Dr David Chuah Joon Huang WAKIL JURUTERA WANITA / WOMAN ENGINEERS REPRESENTATIVE Ir. Rusnida bt Talib AHLI MAJLIS / COUNCIL MEMBERS Ir. Dr Leong Wai Yie, Ir. Razmahwata Mohd Razalli, Ir. Abdul Razak Yakob, Ir. Yau Chau Fong, Y.Bhg. Dato’ Ir. Foong Choy Chye, Y.Bhg. Dato’ Ir. Kisai bin Rahmat, Y.Bhg. Dato’ Ir. Nor Hisham Mohd Ghazali, Ir. Toh Chin Kok, Ir. Dr Jeyanthi Ramasamy, Ir. Yim Hon Wa, Ir. Yam Teong Sian, Y.Bhg. Dato’ Ir. Fakharazi bin Wahijan, Ir. Yasotha Ramachandran Chetty, Ir. Mohmad Asari bin Daud, Ir. Ng Beng Hooi, Ir. Dr Lai Khin Wee, Ir. Prof. Dr Ruslan bin Hassan, Ir. Mah Siew Kien, Y.Bhg. Dato’ Ir. Mohd Azmi bin Ismail, Ir. Ng Yong Kong, Ir. Dr Mui Kai Yin, Y.Bhg. Dato’ Ir. Noor Azmi bin Jaafar, Ir. Ting Chek Choon, Ir. Sukhairul Nizam bin Abd Razak, Ir. Lai Sze Ching, Y.Bhg. Dato’ Ir. Dr Ahmad Anuar bin Othman, Y.Bhg. Dato’ Ir. (Dr) Andy Seo Kian Haw, Y.Bhg. Dato’ Seri Ir. Dr Zaini bin Ujang, Ir. Omar bin Mat Piah WAKIL BAHAGIAN JURUTERA SISWAZAH / YOUNG ENGINEERS SECTION REPRESENTATIVES Dr Yew Weng Kean, Mr. Kuugan Thangarajoo, Ms. Tiang Kor Lin, Mr. Tan Teck Ying, Mr. Lim Yiren PENGERUSI CAWANGAN / BRANCH CHAIRMAN 1. Pulau Pinang: Ir. Yau Ann Nian 2. Selatan: Ir. Teo Ki Yuee 3. Perak: Ir. Simon Yeong Chin Chow 4. Kedah-Perlis: Ir. Haji Abdullah bin Othman 5. Negeri Sembilan: Ir. Dr Oh Seong Por 6. Kelantan: Ir. Hj. Shaipuddin bin Shapii 7. Terengganu: Ir. Abdullah Zawawi bin Haji Mohamad Noor 8. Melaka: Ir. Puvanasvaran a/l A. Perumal 9. Sarawak: Ir. Haidel Heli 10. Sabah: Ir. Jeffrey Ng Vun Ping 11. Miri: Ir. Wong Siong Ung 12. Pahang: Ir. Ahmad Kamal Kunji

AHLI JAWATANKUASA INFORMASI DAN PENERBITAN/ STANDING COMMITTEE ON INFORMATION AND PUBLICATIONS 2019/2020 Pengerusi/Chairman: Ir. Dr Wang Hong Kok Naib Pengerusi/Vice Chairman: Ir. Dr David Chuah Joon Huang Setiausaha/Secretary: Ir. Lau Tai Onn Ketua Pengarang/Chief Editor: Ir. Dr Wang Hong Kok Pengarang Bulletin/Bulletin Editor: Ir. Dr Bhuvendhraa Rudrusamy Pengarang Prinsipal Jurnal/Principal Journal Editor: Ir. Dr David Chuah Joon Huang Pengerusi Perpustakaan/Library Chairman: Ir. C.M.M. Aboobucker Ahli-Ahli/Committee Members: Ir. Ong Guan Hock, Ir. Abdul Razak Yakob, Ir. Yee Thien Seng, Ir. Chin Mee Poon, Ir. Dr Oh Seong Por, Ms. Michelle Lau Chui Chui, Ir. Prof. Dr Abdul Aziz bin Abdul Samad, Ir. Razmahwata bin Mohd Razalli, Y.Bhg. Dato’ Ir. Nor Hisham Mohd Ghazali, Ir. Yasotha Ramachandran Chetty, Dr Sudharshan N. Raman, Ir. Hasril bin Hasini LEMBAGA PENGARANG/EDITORIAL BOARD 2019/2020 Ketua Pengarang/Chief Editor: Ir. Dr Wang Hong Kok Pengarang Bulletin/Bulletin Editor: Ir. Dr Bhuvendhraa Rudrusamy Pengarang Prinsipal Jurnal/Principal Journal Editor: Ir. Dr David Chuah Joon Huang Ahli-ahli/Committee Members: Ir. Lau Tai Onn, Ir. Ong Guan Hock, Ir. Abdul Razak Yakob, Ir. Yee Thien Seng, Ms. Michelle Lau Chui Chui, Ir. Dr Oh Seong Por, Ir. Yasotha Ramachandran Chetty, Dr Sudharshan N. Raman, Ir. Razmahwata bin Mohd Razalli, Ir. Hasril bin Hasini Secretariat: Janet Lim, May Lee

THE INSTITUTION OF ENGINEERS, MALAYSIA

Bangunan Ingenieur, Lots 60 & 62, Jalan 52/4, P.O. Box 223, (Jalan Sultan), 46720 Petaling Jaya, Selangor Darul Ehsan.

Tel: 603-7968 4001/4002 Fax: 603-7957 7678 E-mail: sec@iem.org.my Homepage: http://www.myiem.org.my

5

6 - 12

COVER NOTE & EDITOR’S NOTE

COVER STORY Electrical Safety Today: Challenges of Malaysian Electricity Supply Industry 2.0

16 - 28 FEATURE Evolution of Suruhanjaya Tenaga & Malaysia Electricity Supply Industry 2.0

IEC Young Professionals Programme: Driving Standardisation

Overview of Biogas Systems, Utilisation and Prospects

29 ENGINEER’S LENS Aesthetically Pleasing Yanwu Bridge

31 - 36 FORUMS ASEAN Electrotechnical Symposium & Exhibition 2019

Joint Seminar on Control & Automation (Malaysia Automation & Control Alliance)

Magnetic Resonance Imaging Safety

37

38

NEWS FROM BRANCH

CAMPUS NEWS

IEMNS Pays Courtesy Call on Seremban Mayor

Graduating in an Unprecedented Way

39

41 - 43

ENGINEER’S ADVENTURE BLUE PAGE Romanticism of the Ancient Silk Road

DIMENSION PUBLISHING SDN. BHD.

[ 199701034233 (449732-T) ]

Level 18-01-02, PJX-HM Shah Tower, No. 16A, Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia.

Tel: +(603) 7493 1049 Fax: +(603) 7493 1047 E-mail: info@dimensionpublishing.com Website: www.dimensionpublishing.com CHAIRMAN ROBERT MEBRUER CEO/PUBLISHER PATRICK LEUNG GENERAL MANAGER SHIRLEY THAM ● shirley@dimensionpublishing.com HEAD OF MARKETING & BUSINESS DEVELOPMENT JOSEPH HOW ● joseph@dimensionpublishing.com PRODUCTION EDITOR TAN BEE HONG ● bee@dimensionpublishing.com CONTRIBUTING WRITERS PUTRI ZANINA ● putri@dimensionpublishing.com LAURA LEE ● laura@dimensionpublishing.com SENIOR GRAPHIC DESIGNER SUMATHI MANOKARAN ● sumathi@dimensionpublishing.com GRAPHIC DESIGNER SOFIA ● sofia@dimensionpublishing.com ADVERTISING CONSULTANTS THAM CHOON KIT ● ckit@dimensionpublishing.com ACCOUNTS CUM ADMIN EXECUTIVE YEN YIN ● yenyin@dimensionpublishing.com

COVER NOTE ELECTRICAL SAFETY 2020 & MESI 2.0

by Ir. Francis Xavier Jacob

Chairman, Electrical Engineering Technical Division

I

t is now 2020 and we are on the brink of becoming a developed nation. Sadly, we continue to be beleaguered by electrical safety issues despite the maturity of our electricity supply industry.

What is the situation of electrical safety in the country?

Have there been improvements made that keep up with the development and maturity of the industry? What is being done to improve the situation in this respect?

IEM EETD approached Suruhanjaya Tenaga (ST) recently to gain a better understanding of its latest initiatives to promote electrical safety.

We are also equally excited to learn more about MESI 2.0 and we are sharing our excitement with you in this issue of JURUTERA. IEM EETD is happy to inform readers about the forthcoming biennial ASEAN Symposium & Exhibition 2020, with the theme, Standards Drive Electrical Safety & Innovation. We hope to see you there!

For advertisement placements and subscriptions, please contact:

DIMENSION PUBLISHING SDN. BHD. [ 199701034233 (449732-T) ] Level 18-01-02, PJX-HM Shah Tower, No.16A, Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia.

Tel: +(603) 7493 1049 Fax: +(603) 7493 1047 E-mail: info@dimensionpublishing.com Subscription Department E-mail: info@dimensionpublishing.com

Printed by

EDITOR’S NOTE

by Ir. Dr Bhuvendhraa Rudrusamy Bulletin Editor

PERCETAKAN SKYLINE SDN. BHD. (135134-V)

No. 35 - 37, Jalan 12/32B, TSI Business Industrial Park, Off Jalan Kepong, 52100 Kuala Lumpur.

JURUTERA MONTHLY CIRCULATION: 22,500 COPIES

Submission or placement of articles in JURUTERA could be made to the:Chief Editor THE INSTITUTION OF ENGINEERS, MALAYSIA (IEM) Bangunan Ingenieur, Lots 60 & 62, Jalan 52/4, P.O. Box 223 (Jalan Sultan), 46720 Petaling Jaya, Selangor.

Tel: +(603) 7968 4001/4002 Fax: +(603) 7957 7678 E-mail: pub@iem.org.my or sec@iem.org.my IEM Website: http://www.myiem.org.my © 2020, The Institution of Engineers, Malaysia (IEM) and Dimension Publishing Sdn. Bhd.

PUBLICATION DISCLAIMER The publication has been compiled by both IEM and Dimension with great care and they disclaim any duty to investigate any products, process, services, designs and the like which may be described in this publication.

The appearance of any information in this publication does not necessarily constitute endorsement by IEM and Dimension. There is no guarantee that the information in this publication is free from errors. IEM and Dimension do not necessarily agree with the statement or the opinion expresssed in this publication.

COPYRIGHT JURUTERA Bulletin of IEM is the official magazine of The Institution of Engineers, Malaysia (IEM) and is published by Dimension Publishing Sdn. Bhd. The Institution and the Publisher retain the copyright over all materials published in the magazine.

No part of this magazine may be reproduced and transmitted in any form or stored in any retrieval system of any nature without the prior written permission of IEM and the Publisher.

W

ith the recent rapid changes due to the Covid-19 pandemic, we are consistently receiving various new guidelines and/or standard operating procedures (SOP), especially with regards to operational safety in considering social distancing. It makes me wonder if we are doing enough to contain the pandemic as we resume our national economic activities. Let us be part of efforts in improvising the guidelines and/or SOP for advancement.

Although Movement Control Order (MCO) was changed to Conditional MCO (CMCO) on 4 May, 2020, nationwide and some states were showing extra caution by slowly implementing it in stages, this would be the new norm as we could no longer expect to live the lifestyle that we used to before MCO. But without a doubt, engineers are creative people and I see this as an opportunity for us to innovate to meet the demands of the new world.

Change is a sign of improvement!

JURUTERA welcomes you to submit any article about how you’d have done differently.

COVER STORY

ELECTRICAL SAFETY TODAY: CHALLENGES OF MALAYSIAN ELECTRICITY SUPPLY INDUSTRY 2.0

6

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2020

COVER STORY

The Chief Executive Officer of the Energy Commission (EC), Encik Abdul Razib bin Dawood, began his career with Tenaga Nasional. He has more than 20 years’ experience, having worked with Malaysian and Australian national power utilities, independent power producers, TNSP and as a consultant for renewable energy too. That’s not all; he had also been a construction engineer, project manager, technical advisor, systems planning engineer and a power system study specialist.

En. Abdul Razib bin Dawood, Chief Executive Officer of the Energy Commission (EC), Tenaga Nasional

E

ncik Abdul Razib graduated in 1991 from the Coventry Technical College with a BTEC National Diploma in Engineering, followed by a degree in Electrical Engineering from the University of Warwick, United Kingdom in 1994. He was then awarded his Master of Science in Power Electronic Engineering from the University of Manitoba in Canada in 1996.

JURUTERA speaks to him about the EC’s efforts with regards to electrical safety and plans in the pipeline towards achieving the goals set out under the Malaysian Electricity Supply Industry (MESI) 2.0.

BASIC NECESSITIES Ask any school-going child in the world what the basic necessities of life are and the most common answers

will be food, shelter, running water and electricity (or energy). Energy is a resource very much taken for granted by most of the general population but its importance can never be discounted.

The reliance on energy is global – energy runs our homes, our cars, our phones and computers, stoves, lights, air conditioners and washing machines. It ensures communication, comfort and convenience. The development of a country and the advancement of its technology are directly linked to energy.

When the pandemic crisis hit Malaysia earlier this year and the country went into Movement Control Order (MCO), it was energy that the public and the various sectors including healthcare and security relied on to communicate, to be informed, to protect and to live.

The role of the EC is even more vital than ever. Not only does it have to ensure a strong, smooth and secure energy supply but it also has to safeguard the quality as well as the use of electricity and gas.

ELECTRICAL SAFETY PATTERN The last two years have been good ones for our country, with regards to electrical safety. In 2018 and 2019, the number of accidents per year was 56 and 52 respectively; this was below the national average of 57, a trend that began in 2002. The EC investigated a total of 1,026 electrical

JUNE 2020

accident cases reported in the last 17 years, of which 505 were fatal and 521 were non-fatal.

“Our analysis also found that, for the past five years, 51% of all cases of electrical accidents involved electrical installations such as electrical substations, low voltage and high voltage overhead lines and that 15% of accidents occured in residential areas,” says Encik Abdul Razib.

In 2019, there was a rise in electrical accidents and this was the result of failure to comply with safe working procedures. This was the main cause of all electrical accidents, with a 7% increase as compared to the previous year. The second most common cause was improper installation and/or maintenance and this showed a decrease of 4%.

THE CHALLENGES While electrical safety is clearly a top priority for the EC, the road to a completely 100% safe industry is still fraught with challenges such as: 1. Lack of Competent Controllers: In an effort to ensure that all electrical installations were (and are) always under the purview of clearly competent persons, the EC introduced a “Restricted Certificate of Competent Person” in 2014. This covered a new category of competency and the aim was to tackle industry complaints with regards to the lack of competent persons in

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

7

the market. Unfortunately for the industry, this has not been fully utilised.

As of February 2020, only 144,596 such certificates had been issued in Peninsular Malaysia and Sabah or an average of 24,099 certificates a year. Of this, the bulk was issued to wiremen/endorsers (81,433), followed by chargemen/ restricted (60,420). The remaining 1.9% who qualified for and received competency certificates were electrical engineers (1,293), cable jointers (830), electrical services engineers (359) and electrical supervisors (261).

2. Non-Standard Electrical Wiring: One of the most frequent complaints received by the EC is of that of non-standard wiring. Nonstandard wiring not only exposes poor standards but it can also have very severe repercussions, says Encik Abdul Razib.

“For the past few years, the EC had received numerous complaints

"

COVER STORY

For the past five years, 51% of all cases of electrical accidents have involved electrical installations such as electrical substations, low voltage and high voltage overhead lines.

3.

"

of non-standard wiring installed on their premises. This is an obvious risk to life. Upon investigation, we found that there were two main causes – improper design of wiring by the consultants and installations by contractors which did not meet standard specifications. Such shoddy work is done because the

•

•

•

consultants and contractors lack adequate knowledge and, at the same time, try to cut costs,” he adds.

Unregulated Online Sales of Electrical Equipment: Recently, the world faced a global health crisis and many countries would still be in lockdown mode. Physical store sales have dropped drastically while online sales increased massively. While online commercial platforms provide the ease and convenience of purchase, the downside is a lack of quality control.

The selling of electrical equipment to consumers by e-commerce providers has also become more common.

This factor, combined with the aforementioned lack of consistency in quality, is obviously worrisome, so the EC has come up with plans to curb that. These include: Lodging complaints with the Malaysian Communications and Multimedia Commission (MCMC) regarding sales of nonapproved electrical equipment by e-commerce providers.

Briefing e-commerce providers during regular e-commerce days by the Ministry of International Trade & Industry (MITI) and Malaysia Digital Economy Corporation (MDEC).

Conducting engagement sessions with local e-commerce platforms such as Lazada, Shopee and Pestamall to ensure these have a full understanding of the EC’s regulatory requirements on electrical products by their merchants.

ROADMAP TO ENHANCING ELECTRICAL SAFETY It is clear that electrical safety nationwide is of the utmost urgency and at the forefront of all of the EC’s plans. “It is important to us that all those involved are protected from dangers arising from the electricity and piped gas industries,” says Encik

8

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2020

WHEN YOU NEED A SAFE FIX Sika AnchorFix®-3030 HIGH PERFOMANCE ANCHORING ADHESIVE ́ Corrosion/ rusting prevention of rebar ́ No expansion ́ No crack on concrete substrate ́ Outstanding load bearing capacity ́ More flexibility in anchorage diameter & depth

SIKA KIMIA SDN BHD No. 9, Jalan Timur, 46000 Petaling Jaya, Selangor D.E., Malaysia Phone: +603 7957 0111 · Fax: +603 7956 7291 www.sika.com.my

COVER STORY

"

With growing amounts of distributed energy resources in households, we are increasingly feeding power back into the grid through many small sources – a two-way flow of electricity.

"

Abdul Razib.“The number of accidents must be reduced and our targets met.”

EC’s targets include a 2% annual reduction of electrical accidents, ensuring that there are not more than 2 gas accidents annually and eliminating all preventable gas and electrical incidents. EC is committed to achieving these targets and has developed a five-year safety roadmap (2020-2025) to ensure this. There are five main initiatives.

1. Continuous Development of Safety Codes & Guidelines: Guidelines and safety codes will be reviewed regularly and amended where necessary.

2. Promotion of Self-Regulation within the Industry: Self-regulation within the industry is integral to electrical safety and, as an added incentive, a safety award will be given to players who best practise this. The safety management plan will also be enhanced through a regular programme audit.

3. Strengthening Of Enforcement Activities: Strategic targets such as electrical and gas appliances, construction sites and renovations will be strengthened and compound and prosecution procedures will be enhanced by being benchmarked against other regulators. The EC will work closely with other government agencies and local authorities such as the Prime Minister's Department, SIRIM, Fire & Rescue Department (or BOMBA), Ministry of Housing & Local Government, Public Works Department, MCMC, Department of Wildlife & National

10

JURUTERA

Park, the Malaysian Fisheries Development Authority and Malaysia Contractor Portal in collaboration with Construction Industry Development Board.

4. Increase/Strengthening of Competencies & Capabilities in Handling Safety: Competency control requirements will be reviewed and updated in accordance with current technology advancements.

Registration of contractors will be required and all analysis of root cause accident cases will be enhanced. This will be done via the training and educating of EC workforce in forensic investigations.

5. Utilisation of Electricity & Piped Gas Infrastructure: A National Fiberitation & Connectivity Plan (NFCP) will be set up. This pilot project will be used as a guide for similar projects in the future.

THIRD PARTY ACCESS SYSTEM & THE PEER-TO-PEER The Third Party Access (TPA) system and the Peer-to-Peer (P2P) energy trading are both set to be implemented within the year. The TPA system will allow multiple entities to have access to and be able to utilise gas facilities available in Malaysia on the same terms and conditions.

At present, there are three types of gas facilities falling under the scope of the TPA system – regasification terminals, transmission pipelines and distribution pipelines. Once the TPA is in place, it is hoped that the ensuing competition among the players will be healthy and result in

THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2020

reliable and sustainable gas supply to consumers.

The P2P energy trading will enable a solar photovoltaic producer to sell excess solar electricity on an energy trading platform to another consumer.

This turns consumers into prosumers (a person who is both consumer and producer of a product). Traditionally, prosumers sell solar electricity at a rate competitive to the retailer’s tariff and participating consumers have the choice of purchasing solar electricity from the P2P or from the retailer. The grid operator will be compensated with a grid fee and the retailer operating the energy trading platform is compensated with a retailer’s fee.

Everybody wins.

With the upcoming TPA and P2P energy trading, challenges are anticipated in terms of licencing, electrical safety and the trading mechanism.

TPA & P2P CHALLENGES The most probable challenge under the licence regime will be with regards to the contract between seller and buyer. The contract has to be fair to both parties and ensure a satisfactory deal.

“Both TPA and P2P energy trading are being issued under the Public Generation Licence. This falls under Section 29 of the Electricity Supply Act 1990, which states that all contracts shall be endorsed by the EC,” says Encik Abdul Razib.

“Our second challenge will also be a large one, which is taking on the responsibility for the installation and maintenance during the implementation of TPA. Demarcation areas need to be clearly specified in order to ensure the safety of installations and competent persons while operations and maintenance works are carried out.”

But it is the third challenge that will be the biggest, he adds. This will be challenges which may arise from implementation of the Malaysian Electricity Supply Industry (MESI) 2.0.

COVER STORY MESI 2.0 To be rolled out over six years, from 2019 to 2025, MESI 2.0 is an ambitious attempt to reimagine the Malaysian Electricity Supply Industry. There are four key reform initiatives under the plan: 1. Efficiency: Allowing generators to source for their own fuel to optimise cost, to move from a Power Purchase Agreement (PPA) regime to capacity and energy market and to enhance ringfencing of Single Buyer and Grid System Operators to maintain level playing field to all players.

2. Green/Sustainability: The facilitation of green energy producers and consumers with products such as green tariffs, green gentailers (via a Third Party Contract) and tradable green certificates.

3. Customer Experience: The establishment of a Third Party Access (TPA) framework and network charges for grid in order to facilitate participation, to future-proof through digitalisation as a platform to facilitate smart energy network while using digital technologies and to gradually open up the retail market, allowing players to offer new products and services to customers.

4. Security: To maintain reliability and system security through continuous investment in the system, to continue to provide support for targeted segments such as B40, e-Kasih and Bantuan Sara Hidup recipients and to establish a supplier of last resort framework to ensure uninterrupted electricity supply to customers.

and amend current legislation or to assist in developing new acts, regulations, guidelines and rules. The outcome from MESI 2.0 must also be attractive enough to attract market participation. In addition, with the implementation of MESI 2.0, tariffs will be based on market prices. Actual fuel market price will therefore have a direct effect on the tariff, resulting in it increasing or decreasing,” he says.

Renewables will need to be integrated and energy resources distributed. “With growing amounts of distributed energy resources in households, we are increasingly feeding power back into the grid through many small sources – a two-way flow of electricity. Mitigation actions should be in place to balance the system,” he adds.

There will need to be governance processes and procedures as well as

a plan to handle possible commercial disputes in the future.

Despite the challenges, Encik Abdul Razib is positive that MESI 2.0 can only result in benefits. “Ultimately, we need to educate and create awareness among the public on the benefits of market reforms, like smart meters,” he says.

“Consumers will have more enhanced experiences as they will have choice, options and control as well as improved service levels.

Electricity prices will be more reasonable as the industry becomes more competitive regionally and there is transparency across the value chain. Finally, a huge amount of additional economy activity will be generated with increased capital investments, new job opportunities (2020-2030) and new Small Medium Enterprise businesses.”

CHALLENGES ANTICIPATED Encik Abdul Razib is aware that there will be many challenges, though he firmly believes they can all be dealt with.

“Regulations will need to keep pace as our energy system rapidly evolves. The EC will need to review

JUNE 2020

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

11

COVER STORY

"

The road to a completely 100% safe industry is still fraught with challenges, and regulations will need to keep pace as our energy system rapidly evolves.

"

REGULATION OF ENERGY EFFICIENCY REQUIREMENTS Another highlight for the EC is The Energy Efficiency & Conservation Act (EECA) which is scheduled to be delivered this year. “ We have developed a comprehensive five-year strategy plan which will guide the EC in implementing the EECA. This includes a plan of execution, the development of guidelines and procedures, the development of resources (human and financial) as well as capacity building,” said Encik Abdul Razib.

He is firm in his belief that lots of feedback will be needed and welcomed. “There will be various stakeholder consultations to be conducted and these will include affected and interested parties. The purpose of speaking with stakeholders is to obtain input regarding the guidelines and procedures to regulate the EECA. All the relevant parties have been identified and the invitations will be sent out accordingly,” he says.

In addition, the EECA will also include comprehensive building

12

JURUTERA

energy codes, building energy labelling, electrical appliance energy performance standards and requirements for capacity building of Registered Electrical Energy Managers.

LARGE SCALE SOLAR 4 PROGRAMME Encik Abdul Razib talks about the upcoming Large Scale Solar (LSS) 4 Programme. The LSS 3 programme saw tremendous participation from Renewable Energy (RE) industry players, resulting in a total electricity generation capacity of 500MW. “For the next LSS programme, any implementation method or package will be decided only by the Ministry and will be confidential as long as the tender has not yet been floated,” he says.

“The impact of the Duck Curve to the overall grid system at the moment is less significant. However, when solar contribution towards the grid becomes higher, effective monitoring of the grid system will need to be done, which will include effective management of hydro for night peak shaving and RE forecasting. New technology such as

THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2020

battery storage needs to be further explored. This technology can be an effective measure to manage the Duck Curve. With the right cost and functionality, this technology can be used in the grid system.”

IEM’S ROLE IN SUPPORTING EC TO PROMOTE ELECTRICAL SAFETY Encik Abdul Razib stresses that IEM and all electrical engineers are integral to the advancement of electrical safety in the country. “We need your support. Please promote EC’s publications to the public and to all your members. Help create awareness regarding the importance of compliance to procedures and electrical safety in your internal and external communications such as JURUTERA and Facebook. IEM can also consider organising touch point activities (replicating The Electrical & Electronics Association of Malaysia’s initiatives to promote Residual Current Devices in electrical installations),” he says.

“From the EC’s end, we have stepped up efforts to create awareness among the public by utilising various media such as newspapers, newsletters, radio, television and social media.”

Encik Abdul Razib is confident that with all stakeholders working together, electrical safety awareness will eventually be the norm in Malaysia.

REFERENCES [1] https://www.mestecc.gov.my/web/wpcontent/uploads/2019/11/MESI_2.0_ IGEM19-web.pdf

Advertise with us !

ju ru t era

THE MONTHLY BULLETIN OF THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2016

KDN PP 1050/12/2012 (030192) ISSN 0126-9909

ISSN 0126-9909

Fi re S afet y Manag ement

Driving

The Monthly Bulletin of The Institution of Engineers, Malaysia

KDN PP 1050/12/2012 (030192)

ISSN 0126-9909

STEM

Preparing ENGINEERs for

tomorrow’s

challenges

OCTOBER 2017

INNOVATIONS in

PALM OIL INDUSTRY

JANUARY 2020

T h e M o n t h ly B u l l e t i n o f T h e I n s t i t u t i o n o f E n g i n e e r s , M a l ay s i a

For advertisement placements and subscriptions, please contact:

Dimension Publishing Sdn. Bhd. [ 199701034233 (449732-T) ] +603-7493 1049

info@dimensionpublishing.com

Education

AUGUST 2018

Jurutera

KDN PP 1050/12/2012 (030192)

THE MONTHLY BULLETIN OF THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2016

J URUT

KDN PP 1050/12/2012 (030192) ISSN 0126-9909

17

R 20 CTOBE

O

TH

EM

ON

TH

LY

BU

LLET

IN

OF

TH

E IN

STIT

UT

ION

OF

ER A

EN

G

FEBINEERS, MAL N PP RU AY 1050 AR Y 20 SIA /12 /20 ISSN 12 (03 15

KD

IONS

0126 0192 -99 ) 09

VAT INNO in

OIL PALM RY T S INDU

juru Driving

STEM

(030

192)

ISSN

MR T 0126

-990

Fi re S Man afety age men t

18 ST 20

9

tera

a r e t Juru

/12/

2012

(030

192)

ISSN

0126

-990

9

AUGU

he CoTm Kla ing o f KDN Val ng PP 1 Education 050/ ley 12/2 012

KDN

050 PP 1

ing PrepEaErRs for

Mal

ays

ia

ENGIN row’s tomor

The

Mon

thly

Bull

he of T etin

Inst

itut

ion

ng of E

inee

rs,

ges challen

JANU

ARY

2020 The

Mon

t h ly

Bull

etin

of T he I nsti t

utio

n of Engi ne

ers,

For advertising enquiries, please contact:

Dimension Publishing Sdn. Bhd. [ 199701034233 (449732-T) ]

Level 18-01-02, PJX-HM Shah Tower, No. 16A, Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia.

Joseph How : +6011 1234 8181 Shirley Tham : +6016 283 3013

+603 7493 1049 +603 7493 1047 info@dimensionpublishing.com

Mala

ysia

JURUTER A T H E M O N T H LY BU L L E T I N O F T H E I N S T I T U T I O N O F E N G I N E E R S, M A L AYS I A

Circulation and Readership Profile

JURUTERA has an estimated readership of 200,000 professionals. Our esteemed readership consists of certified engineers, decision making corporate leaders, CEOs, government officials, project directors, entrepreneurs, project consultants, engineering consulting firms and companies involved with engineering products and services.

Advertising Benefits

Our business partners can be assured that their products and services will be given the circulation and exposure they deserve, thus maintaining a sustained advertising presence to our core readers of decision-making engineers and technical experts. Our website offers an even wider market reach, with added international presence, aided by our international affiliation with official engineering bodies all over the world. Our online and offline advertising features such as banner advertising, article sponsorship and direct e-mail announcements have proven to be successful marketing strategies that will set the businesses of our partners apart from their competition.

ADVERTISING RATES PRICES PER INSERTION IN RINGGIT MALAYSIA (RM) 1 INSERTION

3 INSERTIONS

6 INSERTIONS

9 INSERTIONS

12 INSERTIONS

Outside Back Cover (OBC)

7,800

7,050

6,750

6,450

6,150

Inside Front Cover (IFC)

7,250

6,650

6,350

6,050

5,750

Inside Back Cover (IBC)

6,750

6,250

5,950

5,650

5,350

Page 1

6,650

6,150

5,850

5,550

5,250

Facing Inside Back Cover (FIBC)

6,150

5,850

5,550

5,250

4,950

Facing Cover Note (FCN)

5,850

5,300

5,100

4,900

4,700

Facing Contents Page (FCP)

5,700

5,150

4,950

4,750

4,550

Centre Spread

11,200

9,500

9,000

8,500

8,000

ROP Full Page

4,900

4,500

4,300

4,100

3,900

ROP Half Page

2,900

2,650

2,550

2,450

2,350

ROP 1/3 Column

2,200

2,000

1,900

1,850

1,800

ROP 1/4 Page

1,950

1,750

1,650

1,600

1,550

SPECIFIED POSITION (Full Colour Ad)

Special Position: +15% Overseas Advertiser: +25% (Full Advance Payment Required) All prices shown above exclude Computer to Plate (CTP) charges

*Please note that the above prices will be subjected to SST *Advertising rates displayed do not include 15% advertising agency commission

FEATURE

EVOLUTION OF SURUHANJAYA TENAGA & MALAYSIA ELECTRICITY SUPPLY INDUSTRY 2.0

Ir. Francis Xavier Jacob

Ir. Dr Siow Chun Lim

S

uruhanjaya Tenaga (ST) or Energy Commission is a statutory body established under the Energy Commission Act 2001 to regulate the energy sector in Peninsular Malaysia and Sabah. Both electricity and piped gas supply industries are under the direct purview of ST which is responsible for ensuring that electricity and gas supply is made available at reasonable costs nationwide and in a safe manner. Under ST’s context, Economic Regulation, Technical Regulation & Safety Regulation must be addressed with equal importance.

Electricity is a necessity for all, whether we are industrial, commercial or residential consumers. Hence, reliable and affordable supply of electricity is no longer a luxury. To understand how ST and several other stakeholders work together to achieve both of the aforementioned goals, let us revisit MESI and how it has been restructured and evolved over the years.

MESI is the acronym for Malaysia Electricity Supply Industry (MESI). The privatisation of MESI from state-owned/ public entities to privately-owned commercial entities began with the formulation and enforcement of the Electricity Supply Act 1990.

The National Electricity Board (NEB) was privatised as Tenaga Nasional Berhad (TNB) and some limited forms of competition were introduced in the generation sector with the licensing of Independent Power Producers (IPPs).

Transmission, distribution and retail activities were still done by TNB. This started the process of restructuring the industry by allowing the private sector to own the industry and to operate it in

16

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

a commercially viable and efficient manner. It also allowed the private sector to take up the funding of the industry development, thus freeing the public sector of this burden and allowing it to channel its financial resources to other more urgent public projects and requirements.

The restructuring of MESI was further intensified from 2010 to 2014. Known as MESI 1.0, a series of reform took place as shown in Figure 1. The New Enhanced Despatch Agreement (NEDA) was introduced. The Single Buyer (SB) was introduced as an entity to look into the commercial aspects of purchasing electrical power and energy from the generation sector. The Grid System Operator (GSO) with TNB was made more independent. Though still with TNB, both SB and GSO were ring fenced to be answerable to ST. To further enhance the efficiency of fuel purchase by the industry, TNB Fuel and PETRONAS were designated as sole suppliers of coal and gas respectively. To further diversify fuel resources for the industry, IPPs were encouraged to use renewable energy to generate electricity. To do this, special arrangements had to be made to make energy from

Figure 1: MESI 1.0

JUNE 2020

FEATURE

Group photo with Encik Razib

renewable energy resources to compete with other forms of electricity generation in the industry.

The implementation of MESI 1.0 resulted in some improvements though there were some shortcomings.

Today, MESI is valued at RM50 billion in total sales, with the biggest consumers coming from the industry (40%), commercial (36%) and domestic (23%).

Moving forward, the then Ministry of Energy, Science, Technology, Environment & Climate Change (MESTECC) charted and launched MESI 2.0 in 2018. Naturally, ST was one of the key drivers of MESI 2.0. In this article, EETD will provide an overview of MESI 2.0, based on a recent interview with Encik Razib Dawood, CEO of Suruhanjaya Tenaga.

MESI 2.0 was proposed by the then MESTECC with the aim of enhancing industry efficiency and empowering consumers. Under this reform, the industry projected that the increase in demand must be met early to ensure energy security. Digitalisation shall be fully leveraged on to allow better energy control and connectivity for consumers. Key enabling technologies such as smart meters, smart grid, Internet of Things and Industry Revolution 4.0 are the main supporting pillars of digitalisation of the industry. MESI 2.0 shall also empower consumers to actively participate in the electricity supply industry via a decentralisation approach. This approach shall be catalysed by the advancement in distributed energy storage, batteries, microgrids and other equivalent technologies to encourage even more innovative initiatives such as peer-to-peer energy trading. In a nutshell, the primary motivation of MESI 2.0 is to nurture and strengthen the efficiency, transparency, sustainability and competitiveness of a much greener power industry.

Recommended to begin in 2019 till 2025, fuel supplies, generation segment and retail services may evolve to be under a more competitive environment. Open fuel sourcing may be encouraged under MESI 2.0. New SB and GSO shall act as independent functions to level the playing field. Note that the role of the SB entity was further streamlined with the launch of the New Enhanced Dispatch Arrangement (NEDA) rules in October 2015. NEDA was established to elevate competition and cost efficiency of the single buyer market by incentivising the power generators to be more efficient. A hybrid energy management may be put in place as long term power purchasing agreement (PPA) is

Aggregated timeline for MESI initiatives

Reimagining Malaysian Electricity Supply Industry (MESIFigure 2.0) 2: Aggregated timeline for MESI 2.0 initiative

JUNE 2020

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

17

FEATURE gradually shifted to short term PPA. Figure 2 illustrates the aggregated timeline for MESI initiative.

MyPower (Malaysia Programme Office for Power Electricity Reform) Corp, an agency comprising experts in the energy sector, was to be reactivated to drive MESI 2.0. MyPower is set to execute the reforms laid out under the MESI 2.0 masterplan. ST is heavily involved in all MESI initiatives (see Figure 1) which spans a period of 7 years. Third Party Access (TPA) and Peer-to-Peer (P2P) energy trading will be issued under the Public Generation Licence. TPA allows third parties to access gas facilities despite not being the owner or the operator. By so doing, national gas security shall be enhanced by truly liberalising the sector by permitting third party operators to import, regasify, transport, distribute, ship, retail via licensee pipe and use natural gas.

The main challenge anticipated under the licence regime is in ensuring a fair contract arrangement between the seller and the buyer. All contracts are to be endorsed by ST under the provision of Section 29, Electricity Supply Act 1990.

Achieving MESI 2.0 is expected to be challenging. For a start, regulation needs to keep pace with the rapidly evolving energy system. ST needs to review and amend current legislation or develop new laws (act/regulation/ guidelines/rules) in a timely manner. MESI 2.0 can only be successful if there is strong market participation. This, in turn, depends on the attractiveness of the outcomes of MESI 2.0 from the market perspective. With MESI 2.0, tariff will be set based on the market price and it will be directly impacted by the actual fuel market price. Integration of renewables and distributed energy resources into the grid may also be significantly impacting the grid stability.

Distributed generation of power in households is expected to increase and mitigations have to be put in place to ensure that any resulting injection of power to the grid does not disturb the balance of the system.

ST also needs to be prepared to handle a growing number of possible commercial disputes in the near future and this can be achieved through better streamlining of the governance process and procedure. Finally, ST acknowledges that the biggest challenge lies in educating the public on the benefits of MESI 2.0, and this is where IEM EETD can play a part.

With all the key reform initiatives in place, potential outcomes such as better consumer experience, reasonable electricity pricing and generation of additional economic activities via increased capital investments, new job opportunities and SME businesses are foreseeable. Consumers are expected to be granted more options and control as well as improved service levels.

Electricity prices are expected to be regionally competitive with greater transparency across the value chain.

REFERENCES [1] https://www.mestecc.gov.my/web/wp-content/uploads/2019/11/MESI_2.0_IGEM19-web.pdf [2] Aris, Hazleen & Jørgensen, Bo & Hussain, Ida. (2019). Electricity Supply Industry Reform in Malaysia: Current State and Way Forward. 8. 6534-6541. 10.35940/ijrte.D5170.118419.

[3] https://www.st.gov.my/

Authors’ Biodata Ir. Francis Xavier Jacob is Chairman of the Technical Committee on the Standards for Energy Management and sits in various standards working committees. He is a Professional Engineer and a member of IEM.

Secretary/Treasurer of EETD (2019-2020) Ir. Dr Siow Chun Lim is Senior Lecturer at Multimedia University, Managing Director of LiRESAS and Secretary of National Working Group of the ASEAN Engineering Inspectorate- Electrical Installation.

18

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2020

IEM

The Institution of Engineers, Malaysia

Looking for

Engineering Talents?

Post your recruitments ads in the IEM Job Gallery

It’s Free!

Your recruitment ads will reach more than 50,000 members of IEM covering all disciplines of engineering from Civil, Electrical, Mechanical, Marine, Oil and Gas, Chemical, Geotechnical and others!

For further details, please contact Ms Natasha or Ms Nanthini at natasha@iem.org.my or nanthini@iem.org.my Give them a ring at

03-79684001/2

My IEM HQ Official myiem_official www.myiem.org.my

FEATURE

IEC YOUNG PROFESSIONALS PROGRAMME: DRIVING STANDARDISATION

by Ir. Tay Eng Chong

Ir. Dr Siow Chun Lim

IEC Young Professionals Workshop 2019 delegates

T

he International Electrotechnical Commission (IEC) is one of the world’s largest and oldest international standards organisation which produces consensusbased international standards and manages conformity assessment systems for all electrical, electronic and related products, systems and services which are collectively known as “electrotechnology”.

The IEC champions the development of electrotechnical standards by engaging closely with national committees across the globe. Powered by close to 20,000 experts from industry, commerce, government, test and research labs, academia and consumer groups, IEC standards are widely used in more than 97% of global population.

20

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

A decade ago, the IEC-YP (Young Professionals) Programme was established to engage and nurture young professionals across the world to enhance their involvement in IEC standardisation and conformity assessment activities. Since then, the IEC-YP Workshop had been an annual event, starting in Seattle (2010) and then Melbourne (2011), Oslo (2012), New Delhi (2013), Tokyo (2014), Minsk (2015), Frankfurt (2016), Vladivostok (2017), Busan (2018) and Shanghai (2019). It is scheduled to be held in Geneva this year.

Usually held during the IEC general meeting, the IEC-YP Workshop is a platform which allows the voice of upcoming eletrotechnology experts to be heard on an

JUNE 2020

ectively by Standardisation Management Board (SMB), Conformity FEATURE oard (CAB) and Market Strategy Board (MSB). Figure 1 shows the l structure of IEC. Council Board

Central Office (The Executive) Standardisation Management Board (SMB)

Market Strategy Board (MSB)

Conformity Assessment Board (CAB)

Technical Committees

CAB Working Groups

Technical Advisory Committees

IECEE

Strategic Groups

IECEx

Systems Work

IECW

IECRE

Figure 1: Organisational Structure of IEC Figure 1: Organisational Structure of IEC

e for IEC to respond to emerging technologies by fast-tracking and international level and helps to shape the future of global standardisation and conformity assessment. To date, the IEC-YP Workshop has trained he process of standards development. This strong urge is imparted more than 500 young professionals from all around the world.

Since 2014, the IEM has been sending delegates to the IEC-YP Workshop immersing them in a role-playing activity where they have to through Standards Malaysia and 3 YP leaders are selected each year to lead planning and organising of the next Workshop. At the 10th edition of the mselvesthe as a CEO or CTO of a company and a member of the MSB. Workshop in Shanghai, Malaysia was represented by 3 young professionals, including one from IEM. The Shanghai event was attended by 88 YPs from 41 countries.

The top leadership of the IEC-YP Programme has always placed strong emphasis on the importance of continuously nurturing more young professionals to be involved in standards-related activities. It is worth noting that IEC is involved in realising 16 out of 17 United Nation Sustainable

AUTOMATION (SELANGOR) SDN BHD of MSB, they will be the “radar� of IEC and have toALPHA foresee or plan +603-5569 3698is he next 5-10 years. This stimulating and immersive environment +603-5569 4099 ay to train YPs to generate and voice out their ideas. www.alphasel.com (372711-D)

alphamail@alphasel.com

JUNE 2020

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

21

FEATURE Development Goals (UN SDG).

Relating to Equipment for Use in Renewable Energy Current technological trends that IEC has a strong Application. This system aims to facilitate global trade interest in are Artificial Intelligence, Smart City and of the aforementioned equipment while satisfying the Renewable Energy. Unsurprisingly, these are in full safety requirement.

3. IECEx: IEC System for Certification to Standards Relating synchronism with what Malaysia is strongly embracing to Equipment for Use in Explosive Atmospheres. This now. As for our information, the supreme governing system is important in areas such as petrol stations, body of IEC is the council that sets IEC policy and longoil refineries, chemical processing plants, hospital term strategic and financial objectives. It delegates operating theatres, aircraft refuelling and hangars just the management of IEC work to the Council Board, to name a few. with specific management responsibilities in the 4. IECQ: IEC Quality Assessment System for Electronic spheres of standards, conformity assessment and market Components. This system covers the design, strategy being assumed respectively by Standardisation manufacture, assembly and distribution of electronic Management Board (SMB), Conformity Assessment component parts such as active components, Board (CAB) and Market Strategy Board (MSB). Figure 1 electromagnetic components, electromechanical shows the organisational structure of IEC. components, electro-optic components and passive It is imperative for IEC to respond to emerging components just to name a few. technologies by fast-tracking and streamlining the process of standards development. This strong urge is Apart from CAB and SMB meetings, YPs are also imparted to the YPs by immersing them in a role-playing presented with the opportunity to observe more technical activity where they have to visualise themselves as a CEO meetings organised by Technical Committee (TC) and or CTO of a company and a member of the MSB. Standardisation Evaluation Group (SEG). One of the As a member of MSB, they will be the “radar” of IEC and most active SEG is the SEG 10 on Ethics in Autonomous have to foresee or plan activities for the next 5-10 years. & Artificial Intelligence Application. SEG 10 focuses on This stimulating and immersive environment is an effective identifying ethical issues and the societal concerns of AI way to train YPs to generate and voice out their ideas. application. One of the Working Groups (WG) under SEG YPs are also exposed to real SMB meetings where 10 is currently developing a rating system for AI application. standards are deliberated by experts representing In summary, the IEC-YP programme opens the door their respective national committee. As shown in Figure for young professional to be involved in IEC works and 1, SMB manages and coordinates the establishment provides a platform for them to share their thoughts and disbanding of technical committees to develop a with IEC openly. This invaluable experience has motivated particular standard. Timeliness of standards production the 2019 IEC-YPs of Malaysia to work with Standards is always one of the biggest challenges as consensus has Malaysia and former Malaysian IEC-YPs to initiate the to be reached among a majority of national committees.

National IEC-YP programme at home.

Speediness of standards development ensures that they remain relevant and stay abreast of advancements in DRIVING STANDARDISATION IN MALAYSIA technology.

The past and present IEC-YPs from IEM have been working YPs also get to observe how CAB works. CAB drafts closely with Standards Malaysia to drive standardisation the IEC conformity assessment policy and practically in Malaysia since 2016. One of the main initiatives driven supervises conformity assessment activities and systems. IEC’s main objective is to have one test and one certification to be accepted globally. Currently, there are four IEC Conformity Assessment Systems in operation which are as follows (See Figure 1): 1. IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components. Some of the developments include the IECEE Global Motor Energy Efficiency and international cyber security certification.

2. I EC R E: IEC Syst em for Certification to Standards Participants of National IEC Young Professional sharing session at Wisma IEM

22

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2020

In

Pr

The

Ve

N *-

FEATURE is the promotion of awareness of standards among the electrical engineering fraternity in Malaysia. To date, they have organised: 1) IEM-Standards Malaysia Electrotechnical Symposium & Exhibition 2016 2) IEM-Standards Malaysia-Suruhanjaya Tenaga ASEAN Electrotechnical Symposium & Exhibition 2018 3) National IEC-Young Professional Sharing Session 2019 A few IEM YPs are currently involved as IEC experts in SEG 10, TC 64 (Electrical Installations & Protection against Electric Shock) and TC81 (Lightning Protection). They have also initiated an effort to harmonise electrical installation standards in ASEAN countries via the ASEAN Engineering Inspectorate – Electrical Installation (AEI-EI) working group under the ASEAN Federation of Engineering Organisations (AFEO).

The team has also been actively creating awareness of electrical installation standards among electrical engineering undergraduates in Malaysia through standards awareness roadshows and envisions the ultimate goal of including standards education as part of the engineering curriculum in institutions of higher learning nationwide. To date, they have reached out to nearly 20 universities to impart early awareness on technical standards to engineering undergraduates who have been briefly introduced to standards such as IEC 60364, IEC 62305, IEC 61000 and national standards such as MS 1936 and MS 1979.

IEC-YPs will continue to contribute towards standards development and capacity building of more young talents nationally and globally. To be a truly developed nation, upcoming young engineers are strongly encouraged to play an active role in standardisation initiatives and IEM is one of the enabling platforms.

REFERENCE [1] https://www.iec.ch/index.htm

Authors’ Biodata Ir. Tay Eng Chong has 7 years’ experience in Electrical and Extra Low Voltage design in building services.

Secretary/Treasurer of EETD (2019-2020) Ir. Dr Siow Chun Lim is also Senior Lecturer at Multimedia University, Managing Director of LiRESAS, and Secretary of National Working Group of the ASEAN Engineering Inspectorate- Electrical Installation

UPCOMING ACTIVITIES WEBINAR - Technical Talk on “Industry4WRD: The Readiness Assessment” Date Time Venue Approved CPD Speaker

: : : : :

2 June 2020 (Tuesday) 10.00 a.m. – 11.30 a.m.

Online Platform 0

Ir. Dr Tan Chee Fai

WEBINAR - IMPACT OF COVID19 AND MCO/ CMCO ON CONSTRUCTION PROJECTS What to Expect and What to Do? Date Time Venue Approved CPD Speaker

: 2 June 2020 (Tuesday) : 3.00 p.m. – 4.30 p.m. : Online Platform : 0 : Ir. Lai Sze Ching

In Association With:

RED BY SIROCCO KUALA LUMPUR Presented By:

IEM YES ANNUAL DINNER 2020

Young Engineers Section (YES) The Institution of Engineers, Malaysia (IEM)

Venue Organiser:

10 OCTOBER 2020 * THEME: HOLLYWOOD

EMPOWERING YOUNG ENGINEERS SINCE 1970 Note: * - Subject to change due to unforseen circumstance

JUNE 2020

TICKETS

6.00 PM - 10.30 PM

THE INSTITUTION OF ENGINEERS, MALAYSIA

STUDENTS RM 180.00 PUBLIC RM 250.00 TABLE (10 PAX) RM 2,300.00

SPONSORSHIP PLATINUM RM 10,000.00 & ABOVE GOLD RM 8,000.00 & ABOVE SILVER RM 6,000.00 & ABOVE BRONZE RM 2,000.00 & ABOVE ALUMNI RM 3,000.00 (TABLE SPONSOR)

JURUTERA

23

IEM

The Institution of Engineers, Malaysia

61

IEM st Annual Dinner and Awards Night 2020 Programme Book We are pleased to inform that IEM will be holding the 61st Annual Dinner and Awards Night 2020 on 26 September, 2020. Dimension Publishing has been appointed to put together the Annual Dinner Programme Book which will be circulated to all 1,200 guests on that night at KL Convention Centre.

It is an annual event organised by IEM to present awards to winners of projects and to announce the new committee for year 2020/2021.

Special guests of honour will be invited to officiate at the event.

We are now calling for interested advertisers to book their preferred advertising position in this programme book. Below please find the advertising rates for your immediate action and reply. We hope to hear from you soon before the closing date on 28 August 2020.

Book Size

:

210mm(W) x 285mm(H).

Please provide extra 6mm for bleed area on all 4 sides

Printing Specifications

:

230gsm art card (Cover), 105gsm art paper (Text), 4C + 4C, Staple binding, UV varnish on Cover

Quantity

:

1,200 copies

Advertisement Format

:

High resolution PDF file, with crop marks, bleed area, text being outlined

:

28 August 2020 (Fri) (Ad Booking)

:

4 September 2020 (Fri) (Artwork Submission)

Deadlines

Kindly tick in the relevant bracket. IEM reserves the right to edit, revise or reject any advertisement deemed unsuitable or inappropriate. The final print-ready artwork to be furnished by advertisers.

SPECIFIED POSITION

PRICE PER INSERTION (RM)

I WISH TO BOOK (Please tick)

Outside Back Cover (OBC)

4,000

(

)

Inside Front Cover (IFC)

3,500

(

)

Inside Back Cover (IBC)

3,200

(

)

Page 1

3,000

(

)

Facing Chairman’s Message

2,800

(

)

Facing President’s Message

2,800

(

)

Facing Inside Back Cover

2,800

(

)

Facing Past Presidents List

3,000

(

)

Run-On-Page (ROP)

1,900

(

)

Double Page Spread (DPS)

4,500

(

)

ADDITIONAL BENEFITS

Company logo will appear in the Acknowledgement Page in both IEM Dinner Programme Book and JURUTERA October 2020

Remarks: • Space availability is subject to booking on first-come-first-served basis • Prices shown above exclude 15% Advertising Agency commission • Please note that the above prices will be subjected to SST • Any cancellation after signing the Advertising Contract will result in a 50% penalty charge • Payment term: 14 days upon invoicing Name of Company:

Date:

______________________________________________________

______________________________________________________

Company Stamp & Authorized Signature:

Contact Person(s): ______________________________________________________ Email Address:

______________________________________________________

______________________________________________________

For advertising enquiries, please contact:

www.dimensionpublishing.com

DIMENSION PUBLISHING SDN. BHD. (449732-T) Level 18-01-02, PJX-HM Shah Tower, No. 16A, Persiaran Barat, 46050 Petaling Jaya, Selangor.

Tel: +603 7493 1049 Fax: +603 7493 1047 Email: info@dimensionpublishing.com

FEATURE

OVERVIEW OF BIOGAS SYSTEMS, UTILISATION AND PROSPECTS

Mr. Alex Looi Tink Huey

Ir. Dr Bhuvendhraa Rudrusamy

B

iogas is defined as gas produced by the bacterial breakdown of organic matter or feedstock by anaerobic microbes (methanogens) in the absence of oxygen. It is categorised as a clean Renewable Energy (RE) source produced biologically through anaerobic digestion consisting of 50–70% methane (CH4), 30–50% carbon dioxide (CO2) and traces of other contaminants such as siloxanes, volatile organic compounds and hydrogen sulphide (H2S) (depending on the source of the feedstock) [1].

The natural course for biogas includes buried organic matter, wet soils, aquatic sediment, etc. Human activities create additional sources including Municipal Solid Waste (MSW) landfills, wastewater ponding systems, digesters at water resource recovery facilities (wastewater treatment), livestock farms, food production facilities, etc. Important contributions of biogas capturing and utilisation to environmental sustainability are: • CO2 neutral [1], as the CO2 released by combustion of biogas was previously removed from the atmosphere during the generation of biomass through photosynthesis • Capture of biogas improves climate change and significantly reduces emissions of greenhouse gas, CH4, which has far more damaging effects (25 times) [2] on the climate than CO2.

ANAEROBIC DIGESTION PROCESS Biogas is produced either by mesophilic anaerobic digestion (35-40°C) or thermophilic anaerobic digestion (48-57°C) [3]. Thermophilic process has a faster throughput with faster biogas production per unit feedstock [4].

However, this process requires higher capital expenditure and more energy and control required for heating. Biogas anaerobic digestion involves the complex interaction of various microorganisms and takes place in four (4) separate phases: Hydrolysis, acidogenesis, acetogenesis, and methanogenesis [5] as shown in Figure 1.

JUNE 2020

Figure 1: Anaerobic Digestion Process.

Source: MEEMS Module B7 – Anaerobic Digestion

Typically, the anaerobic digestion process starts with the organic matter or feedstock where large contents of carbohydrates, cellulose, proteins and fats are broken down into simple sugars, amino acids and fatty acids [5]. Then, soluble monomers are further converted into volatile fatty acids. The products of acidogenesis subsequently breaks down into acetic acid, releasing hydrogen and CO2. The last phase which involves methanogens then produce CH4 by cleaving 2 acetic acid molecules to form CH4 and CO2.

BIOGAS PRODUCTION TECHNOLOGIES Loh et al., [6] indicated that anaerobic digestion can be designed and engineered in a closed-tank anaerobic digester system, or in a covered lagoon digester. Commonly used biogas production technologies are Continuous Stirred-Tank Reactor (CSTR), Up-Flow Anaerobic Sludge Blanket (UASB) and Dry-Fermentation process.

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

25

FEATURE The dry-fermentation biogas-based process is also known as the percolation process. The primary focus of this method is to digest dissolvable organics. This process is stackable and has no flowing of solid rich biomass without any pre-processing. It allows simple plant set-up with low capital and operational costs.

BIOGAS DEVELOPMENT IN MALAYSIA, CHALLENGES & OPPORTUNITIES

Figure 2: Continuous Stirred-Tank Reactor.

Source: Design Specification of the CSTR Anaerobic Digester of Keck Seng

The CSTR system is typically made of mild steel digester tanks with size and capacity in the range of 3,000 to 4,500m3. Other alternative materials may include glassfused-to-steel digester tank with double membrane gas holder installed on the roof. The covered lagoon digester system is equipped with gas-tight covers called geomembranes with internal mixing mechanisms. It has lower capital and operational expenditure compared with the closed-tank digester system.

Cover Biogas Storage

Biogas to be utilised Digester Effluent

Post Treatment Digester Influent

Figure 3: Covered Lagoon Digester. Source: Green Energy Network

Malaysia is the second largest palm oil producer in the world, with 446 palm oil mills (as at March 2020) [7], and has huge potential for RE generation from Palm Oil Mill Effluent (POME). We have the potential to generate over 500MW of RE from biogas alone [8]. The biogas development here is driven primarily by biogas capture from POME and landfills.

POME is a wastewater generated by the milling process of Crude Palm Oil (CPO) which has a high soluble organic content, and Biochemical Oxygen Demand/Chemical Oxygen Demand (BOD/COD) > 0.45 [6], making it an excellent feedstock for biogas production. Sanitary landfills from MSW can also capture significant amount of biogas due to the enormous amount of MSW being generated daily.

Malaysia currently has 69.45MW installed biogas capacity of commissioned RE installations under the FiT mechanism, with an additional 96.94MW approved and awaiting FiT commencement [9]. Introduced in 2011, FiT is one of the key drivers for biogas development where electricity generated from biogas fed into the utility grid gets a guaranteed tariff from the government and is funded via a 1.6% levy on electricity bills. In 2018, e-bidding mechanism for biogas was introduced to optimise the utilisation rate of the RE fund and, at the same time, made the market

biogas utilisation

Figure 4: Dry-Fermentation Technology. Source: Bekon Technology

26

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

JUNE 2020

FEATURE more competitive. Project owners and developers of RE would also receive tax benefits such as exemption from income tax, Investment Tax Allowance, import and sales tax exemptions. Green Technology Financing Scheme and technology acquisition grants provide the necessary financial support to fund RE projects.

On the other hand, although the resources for biogas and biomass are abundant, the right mechanisms for production and incentives need to be put in place to drive the growth in this sector. Grid connectivity is one of the barriers of biogas development. Most palm oil mills are situated in remote areas and are not always connected to the grid or have low electricity demand in its surrounding rural areas. This means an inability to tap into the FiT scheme or have high investment costs to build the grid infrastructure.

The application of biogas has many advantages aside from combustion in biogas engines for electrical power generation to meet localised uses such as rural electrification or connecting to the utility power grid. Other applications include co-combustion in a biomass boiler to generate steam, combined heat and power (CHP) system, absorption chilling and many more.

Biogas can be further upgraded into natural gas quality known as Bio-Compressed Natural Gas (Bio-CNG).

The raw biogas captured is treated using a combined biological and chemical process to reduce H2S and CO2 levels, further enriching the CH4 content to more than 94% [10]. The Bio-CNG is then compressed and stored for dispensing to compressed natural gas trailers for distribution and utilisation (virtual pipeline) or injecting into the gas grid. However, lack of regulatory support and financial incentives for non-electricity utilisation of biogas hamper development work.

Challenges such as risks perceived by the private sector, utility power grid infrastructure (introducing smart microgrids and centralised networks), capacity building (training of competent personnel), diversifying feedstocks to include manure, food waste, sewage, and other agricultural residues such as rubber, rice, sugarcane, etc., financial institutions, national guidelines and standards can be further developed to support this. Regulations and policies can also be further strengthened to accelerate renewable energy advancement and development. Malaysia’s focus on renewable energy requires a coordinated and concerted action from all relevant stakeholders and government agencies to tackle long-term environmental impacts of coal-fired power generation, increasing greenhouse gases (GHGs) emissions and detrimental effects of climate change.

28

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

REFERENCES [1] A.I. Adnan, M.Y. Ong, S. Nomanbhay, K.W. Chew, and P.L. Show, “Technologies for Biogas Upgrading to Biomethane: A Review,” Bioengineering, 6, 92, 2019. Accessed on: Oct. 23, 2019. [Online]. Available: https://www.mdpi.com/23065354/6/4/92/pdf [2] D.L. Chandler, Explained: Greenhouse Gases, Massachusetts Institute of Technology, January 30, 2017. Accessed on Oct 23, 2019. [Online]. Available: http://news.mit.edu/2017/explainedgreenhouse-gases-0130 [3] S.L. Tong, and A.L. Lee, “The Present Status and Potentials of Biogas Production and Utilisation for Palm Oil Mill-based Residues,” POEB, 104, 2012. Accessed on Oct 30, 2019.

[Online]. Available: http://palmoilis.mpob.gov.my/publications/ POEB/poeb104-tong.pdf [4] I.S. Arvanitoyannis, A. Kassaveti, and D. Ladas, Waste Management for the Food Industries, Cambridge: Academic Press, 2008.

[5] A. Anukam, A. Mohammadi, M. Navqi, and K. Granström, “A Review of the Chemistry of Anaerobic Digestion: Methods of Accelerating and Optimizing Process Efficiency,” Processes, 7, 504, 2019. Accessed on: Oct. 23, 2019. [Online]. Available: https://www.mdpi.com/2227-9717/7/8/504/pdf [6] S.H. Loh, L.L Dazhi, M.A. Sukiran, and Y.M. Choo, “A Biogas Trapping Facility for Handling Palm Oil Mill Effluent (POME),” TOT, 564, 2011. Accessed on Oct 30, 2010. {Online}. Available: http://palmoilis.mpob.gov.my/publications/TOT/TT-491.pdf [7] Malaysian Palm Oil Board, Number and Capacities of Palm Oil Sectors March 2020 (Tonnes/Year), MPOB, March 2020.

Accessed on May 6, 2020. [Online]. Available: http://bepi.mpob. gov.my/index.php/en/sectoral-status/sectoral-status-2020/ number-a-capacities-of-palm-oil-sectors-2020.html [8] M. Wekezer, The Generation of Biogas in Malaysia – Chance or Risk?, Rödl & Partner, August 2019, Accessed on May 6, 2020.

[Online]. Available: https://www.roedl.com/insights/renewableenergy/2019-08/generation-of-biogas-in-malaysia-chance-orrisk [9] Sustainable Energy Development Authority, RE Installed Capacities, SEDA, 2019. Accessed on May 6, 2020. [Online].

Available: https://www.seda.gov.my/statistics-monitoring/reinstalled-capacities/ [10] N.A. Bakar, W.S. Lim, S.K. Loh, A.A. Aziz, M.F. Saad, M.K. Kamarudin, Y.S. Lew, and D.Y Lim, “Bio-Compressed Natural Gas (Bio-CNG) Production from Palm Oil Mill Effluent (POME),” TOT, 618, 2017. Accessed on Oct 30, 2010. {Online}. Available: http://palmoilis.mpob.gov.my/publications/TOT/tot2017/TT618Nasrin.pdf

Authors’ Biodata Actively involved in the renewable energy sector, Mr. Alex Looi Tink Huey is the elected Committee Member of IEM Electrical Engineering Technical Division (EETD) and Chairman of Activities Organising Committee.

Ir. Dr Bhuvendhraa Rudrusamy is IEM Council Member, Bulletin Editor and Advisor of eETD. He lectures at the School of Engineering & Physical Sciences, Heriot-Watt University Malaysia.

JUNE 2020

ENGINEER'S LENS

AESTHETICALLY PLEASING YANWU BRIDGE

Y

anwu Bridge is one of 58 road bridges found in Xiamen in China’s Fujian Province. It is actually an elevated highway that forms part of Xiamen’s ring road system and is located along the south-western corner of Xiamen island.

Construction of the 2.2km elevated highway began in late 2001 and it was opened to traffic in September 2003.

The main deck of the bridge was deliberately designed

JUNE 2020

Ir. Ong Guan Hock Ir. Ong Guan Hock is a committee member of Standing Committee on Information & Publications.

at a low elevation relative to the water surface beneath it to minimise its impact on the surrounding coastal landscape. During high tide, the bridge is said to look like it’s floating on the sea, with waves occasionally splashing against its sides.

For aesthetic considerations, there are also no lamp posts; street lighting is achieved by mounting lanterns directly on the bridge railing.

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

29

ELECTRICAL ENGINEERING TECHNICAL DIVISION

FORUM

ASEAN ELECTROTECHNICAL SYMPOSIUM & EXHIBITION 2019

by Ir. Tay Eng Chong

B

uilding up on the success of the ASEAN Electrotechnical Symposium & Exhibition 2016 and 2018 in Kuala Lumpur, The Institution of Engineers, Malaysia (IEM), in collaboration with Standards Malaysia and Suruhanjaya Tenaga, organised the symposium in Georgetown, Penang, on 5 December 2019. This was the first time it was organised outside the Klang Valley.

The aim was to propagate and disseminate the latest information on electrical installation standards and regulations in buildings among ASEAN countries to the northern part of Peninsular Malaysia. A total of 139 participants registered for the symposium.

It started with a welcome speech by IEM Penang Branch Chairman Ir. Yau Ann Nian, followed by a speech by IEM President Ir. David Lai Kong Phooi. The symposium was then launched by Encik Hussalmizzar bin Hussain, Director of Accreditation, Standards Malaysia, who emphasised the importance of standards usage in Malaysia and globally. This was followed by a keynote speech by Mr. Dennis Chew, Director of IEC Asia-Pacific Regional Centre, who introduced the participants to the International Electrotechnical Commission (IEC). He encouraged technical experts in the audience to join the IEC working group and enhance their involvement in standardisation works.

After a short break, Ir. Yau Chau Fong, Chairperson of ASEAN Engineering Inspectorate – Electrical Installation (AEI-EI) presented a brief overview of ASEAN Federation of Engineering Organisations (AFEO) and ASEAN Engineering Inspectorate (AEI). The AEI-EI’s long term objective is to work in line with the ASEAN initiatives of ASEAN Connectivity Blueprint 2025 and to initiate a Mutual Recognition Agreement for electrical installation works among ASEAN countries. This will ultimately lead towards harmonisation of ASEAN electrical installation standards and regulations. The current level of awareness

JUNE 2020

on electrical installation standards among ASEAN Member States (AMS) is still relatively low and the majority are unaware of the AMS regulatory requirements.

In December 2018, AEI-EI published a feasibility study titled “White Paper on Electrical Installation Standards in Buildings among ASEAN Countries” to bring about greater awareness of AMS regulatory requirements. One key finding of the study was that 90% of AMS had adopted IEC standards as base standards.

At present, AEI-EI has established several technical subcommittees to review several key areas under IEC 60364 which include special location installation (IEC 60364-7), terms and definitions (IEC 60364-1), verification of electrical installations (IEC 60364-6), energy efficiency and prosumer (IEC 60364-8).

Then a forum was held to discuss the differences in the design requirements of electrical installations in special locations, especially in the bathroom and shower areas.

For this, most Asean countries use IEC 60364-7-701 as the baseline standard. However, the Indonesian national standard has more stringent requirements than IEC 603647-701.

IEM President Ir. David Lai Kong Phooi making his speech

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

31

FORUM

Group picture of participants and speakers at the symposium

In the afternoon, Ir. Simon Leong from Brunei talked about recommendations or guidelines for the definition of design, erection and verification of electrical installation among Asean countries and said there were still minor gaps and differences to be recognised. Then, Dr Florigo C. Varona spoke on the

latest updates and developments of energy efficiency in The Philippines.

Last but not least, Ir. Francis Xavier Jacob and Ir. Lee Cheng Pay made presentations on the latest updates in energy efficiency and electrical installation code in Malaysia respectively.

Embarking on a Journey for Scopus-Indexed

Journal of The Institution of Engineers, Malaysia invites members/readers to submit technical papers Your benefits » Be part of 60 years old Journal » Be part of the big team to push for Journal re-indexing » New International Advisory Board » New Journal Editorial Board » A peer-reviewed Journal » Be recognised as a researcher/professional » Each paper published will be paid RM500, starting 2020

32

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

Write to

pub@iem.org.my Principal Journal Editor:

Ir. Dr David Chuah Joon Huang Or call

Miss May, 603-7968 4001/4002

JUNE 2020

Jurutera.pdf

C

M

Y

CM

MY

CY

CMY

K

1

17/01/2019

5:11 PM

FORUM

ELECTRICAL ENGINEERING TECHNICAL DIVISION

JOINT SEMINAR ON CONTROL & AUTOMATION (MALAYSIA AUTOMATION & CONTROL ALLIANCE)

by Ir. Dr Siow Chun Lim

T

he fourth wave of the Industrial Revolution has brought about an accelerated rate of automation sweeping across multiple sectors. With productivity and efficiency as the primary goals, industrial processes and activities have been increasingly automated, albeit at varying degrees.

Nonetheless, another equally important, if not more, expected benefit of automation is safety enhancement.

With this in mind, IEM EETD organised a seminar on Control & Automation on 12 March 2020 at Wisma IEM, in collaboration with the International Society of Automation (ISA), the Institute of Measurement & Control (InstMC), IET and IEEE Control Systems Society (CSS).

Industrial experts who shared their knowledge and experiences at the seminar included Ir. V.R. Harindran, Ir. Johnson Tan, Encik Sharul Rashid, Mr. Darren Tay, Dr Chua Wen-Shyan and Assoc. Professor Dr Mohd Hezri Fazalul. The topics ranged from process safety, digitalisation in automation and controls, cyber security

Ir. V.R. Harindran, the first speaker

34

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

The group of panelists

in industrial network, smart factory automation and the latest research trends in process control.

According to the World Economic Forum (Global Risks Report 2018), cyber-attacks would be among the top 5 risks to global stability over the next five years. The other 4 are natural disasters, extreme weather, data fraud and failure to address climate change.

So it is not surprising that cyber-security is an alarming issue in Industrial Control System (ICS). Cyber-security is defined as a group of measures to safeguard a computer system against unauthorised access which can also be in the form of hacking and attack through malicious software which includes viruses, ransomware, Trojan horses, worms and bots. To combat or prevent these cyber-threats, it is imperative that the management of ICS inculcates the culture of cyberhygiene among the stakeholders. Cyber-hygiene covers best practices that users can undertake to improve their cyber-security while engaging in common online activities.

These include firewalls, antivirus, pathing, strong

JUNE 2020

FORUM

Our products:

Group photo of all participants

passwords, safe browsing habits, safe email habits, strong encryption, back-up of data, management of portable media and disposal of cyber assets. Both Information Technology (IT) and Operation Technology (OT) should converge in terms of people, technology and process to ensure that cyber-security risks are optimally managed. Both security and availability of service should be of equal importance in an ICS environment.

There was a technical forum at the end of the seminar, moderated

by Encik Sharul, with panelists Ir. V.R. Harindran, Ir. Dr Norhaliza Abdul Wahab, Ir. Amir Farid and Ir. Chong Chew Fan who represented industry and academia.

Control, instrumentation & measurement and automation systems are the key enablers of an unmanned, autonomous, seamless, remote and fullyintegrated industry. The forum concluded by reinstating the importance of engineering professionals in fully realising the potential of automation of industry while keeping industrial safety in check at all times.

: 012 355 9151 : 012 329 3378 (Whatsapp only)

No. 45-3, Jalan PJU 5/20 The Strand, Kota Damansara 47810 Petaling Jaya Selangor Darul Ehsan Click here for more details: https://www.myiem.org.my/content/Related_to_Engineering-382

JUNE 2020

Tel Fax Email Email

: 603 6142 6638 : 603 6142 6693 : leehuiseng@nehemiahwalls.com : enquiry@nehemiahwalls.com

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

35

FORUM

MAGNETIC RESONANCE IMAGING SAFETY

by Ir. Shamila Ariaratnam

A

t 9 a.m. on 14 December 2019, 47 engineers from the various disciplines filled Auditorium Tan Sri Chin Fung Kee at Wisma IEM to listen to a talk on Magnetic Resonance Imaging (MRI) Safety.

The speakers were Mr. Steven Rajah Ponnampalam and Ir. Shamila Ariaratnam. Mr. Steven, Inspector of Works with the Board of Engineers Malaysia and a Qualified Technician with the Malaysia Board of Technologists, spoke first, followed by Ir. Shamila, a freelance Healthcare & Biomedical Engineering Consultant, Trainer & Auditor.

The talk started with the definition of MRI and participants were shown a schematic diagram of the principal components, equipment block diagram and inner workings of a MRI, magnetic fields and principle of physics of the MRI. An electromagnetic field is produced when the MRI coil spins. This electromagnetic field extends beyond the MRI scanner and attracts ferromagnetic metal objects. Nonetheless, the magnetic field exposure is reduced by constructing the MRI scanner within a Faraday cage.

In addition to health screening, patients who enter the MRI room are checked for any metal object they might be carrying. Medical devices brought into the MRI room must also be MRI compatible. Only radiologists or authorised radiographers can give permission for technical personnel to enter the MRI room to perform breakdown or maintenance services. These technical personnel will also have to adhere to basic safety measures when carrying out periodical maintenance.

Broadly, MRI safety can be categorised into two sections: That related to patient and/or healthcare providers and that related to image quality for clinical usefulness.

The first section concerns temperature – burn, nerve stimulation, noise, projectile effect, torsion & translation, shrapnel or metallic foreign bodies, presence

36

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

of tattoos/permanent cosmetics, metallic piercings and jewellery, medical history, claustrophobia and emergency.

The second section concerns the metrics of image quality such as signal-to-noise ratio, geometric distortion, image uniformity, slice thickness, spatial resolution and spectroscopy performance.

For each safety concern, the cause and effect, method used to mitigate and the corresponding standards used to test and measure the compliance were presented in this talk. The general safety requirements, establishing safety zones and signages according to the fringe fields and MRI Procedure Screening Form for Patients are vital in preventing adverse events. The MRI Image quality is also of utmost importance.

Therefore, tests and measurements require physical laboratory studies to ensure good quality images are produced. This leads to the responsibility of the manufacturer and technical personnel. Related MRI standards were also discussed.

To conclude, the MRI environment presents a unique safety hazard that requires well-defined protocols, maintaining constant vigilance, up-to-date MRI guidelines and education to ensure the safest possible environment for patients, research participants, staff members and visitors.

Participants at the MRI safety talk

JUNE 2020

NEWS FROM BRANCH

NEWS FROM BRANCH

IEMNS PAYS COURTESY CALL ON SEREMBAN MAYOR

by Ir. Dr Oh Seong Por

Vision Valley (MVV), identified as the extension to the Greater Kuala Lumpur conurbation. Seremban City and its capital covers an area of 959 sq. km. and has a population of over 700,000.

On 2 March 2020, Ir. Dr Oh Seong Por, chairman of The Institution of Engineers Malaysia Negeri Sembilan Branch or IEMNS, led a delegate comprising Ir. Hazlin bin Harun (Hon Secretary), Ir. Chong Chee Yen (Hon Treasurer) and Ir. Richard Khoo (Past Hon Treasurer) to pay a courtesy call to the Seremban Mayor’s Office. Encik Sabaruddin bin Sulaiman, Director of the Engineering Department was Group picture (l-r): Ir. Chong Chee Yen, Ir. Hazlin bin Harun, Dato’ Zazali bin Solehudin, Ir. Dr Oh Seong Por, also in attendance. We explained to Ir. Richard Khoo and Encik Sabarudin bin Sulaiman the Mayor that IEM was a learned n 20 January 2020, the capital of Negeri society that championed engineering to develop the Sembilan, Seremban, was officially declared nation and bring betterment to mankind. as bandaraya (city) by the Yang di-Pertuan We also briefed him on IEMNS activities such as Besar of Negeri Sembilan, Tuanku Muhriz ibni Almarhum technical training for young engineers and students, Tuanku Munawir. Seremban is now administered by the technical talks and visits to upgrade the competencies of Seremban City Council (Majlis Bandaraya Seremban) practising engineers, conducting professional interviews which was formed after the merging of Seremban and to elevate candidates to become professional engineers Nilai municipal councils on 1 January 2020. Seremban’s and social activities with the community and agencies. first Mayor is Dato’ Zazali bin Solehudin.

We also talked about our intention to participate in state Although the Ministry of Housing & Local Government development plans. had approved the declaration of city status on 9 Dato’ Zazali was pleased with our activities and said the September 2009, it was deferred for over a decade due to Seremban City Council will continue to uplift infrastructures infrastructure improvement, change of state government which require engineering expertise. He thanked us for the (PRU 14) and the relocation of the administration building courtesy visit and expressed cooperation with IEMNS in the to Forest Height. The change to city status has enhanced near future. Ir. Dr Oh then presented a memento to Dato’ Seremban as the hub of the new growth corridor, Malaysia Zazali at the end of the visit.

O

36

JURUTERA

THE INSTITUTION OF ENGINEERS, JUNE MALAYSIA 2020

THE JUNE INSTITUTION 2020 OF ENGINEERS, MALAYSIA

JURUTERA

37

CAMPUS NEWS

GRADUATING IN AN UNPRECEDENTED WAY

by Lim Chun Zhe

Julian Goh Hui May

Ir. Dr Bhuvendhraa Rudrusamy (Corresponding Author)

L

ife during the Movement Controlled Order (MCO) has definitely been exciting. Not too long ago, my peers and I had jokingly discussed the possibility of not having to attend classes physically and even obtaining a passing grade through “pass by catastrophe”. Now, this remote possibility has become reality.

Initially, conducting online classes was the talk of the town, with the names of various communication platforms such as Zoom and Teams being frequently mentioned.

Access to such platforms allowed students to attend classes in the comfort of their homes, increased flexibility in lecturer hours and reduced travel time. However, some students felt discouraged at having to participate in online classes due to the dissolution of the distinction between university time and private time. Some were also disappointed as they felt that the quality of education they received via online lectures was not be up to their expectations when compared to a real life campus experience.

Studying from home means communication is mostly done online. Phrases like “sorry, can you repeat that again?” have become standard responses at many online meetings or classes due to poor network connections.

Furthermore, the universities had canceled all laboratory sessions that significantly impacted most of the engineering students in completing the prototyping.

The research team from various timezone find difficulties when opt to video conferencing to keep everyone accounted for.

Apart from that, work quality may also be affected as there are more distractions at home, such as pets, family members, television and even the bed. Some students find it a challenge to maintain self-discipline in order to retain focus on academics. When the university was open, students could study in the library where it was quiet. Replicating the same environment at home is equally important to improve the learning experience.

The pandemic has upturned traditional methods of examinations. Universities are frantically looking for solutions to evaluate a student’s performance fairly.

38

JURUTERA

THE INSTITUTION OF ENGINEERS, MALAYSIA

Having traditional examinations that mainly involve memorising engineering facts is no longer suitable as students can easily search for the answers online, while evaluation based on critical thinking and comprehensive solution generation is implementable through online exams. This may push educational reforms to shape the criteria by which students are assessed and which will allow universities to test pioneering evaluation methods.

Another mode of assessment, such as presentationbased assessment, is also conducted online. One of the key disparities between face-to-face and online presentation is the presence of eye contact, allowing the presenter to be more engaging with the examiner.

For online presentations, students will have to find other alternatives to engage with the examiners, such as improving vocal delivery, use of informative animations, etc. Therefore, the transition to online presentations will provide students with a new experience in adapting to new methods where video conferencing across different countries will be a norm.

Some universities implemented a safety net by graduating with a similar class that was awarded last year and many welcomed the move. However, there are concerns that such methods of evaluation may impact the graduates’ ability to find jobs or academic opportunities. Will employers feel that this batch of graduates does not have sufficient academic quality?

Graduation is a very important milestone for students to celebrate their hard-earned academic completion with loved ones. It concludes their education life and marks the start of their journey as a contributing member of society. The loss of such a pristine event has greatly saddened the heart of many. Some universities provide the option to postpone the graduation ceremony to a later date, but it will never be the same experience.

We are living through a most interesting time. Sir Issac Newton once referred to the time he spent in quarantine during the 1665 Great Plague of London as the “year of wonders”. Let us do the same.

JUNE 2020

ENGINEER'S ADVENTURES

ROMANTICISM OF THE ANCIENT SILK ROAD

M

y first trip on the ancient Silk Road was in August 2001 when I joined a group of friends in retracing the footsteps of yesteryears’ trade caravans from Urumqi, the capital of Xinjiang Uyghur Autonomous Region of China, all the way to Islamabad, the capital of Pakistan, cutting right across the great Taklamakan Desert, skirting the mighty Kunlun Mountain Range to reach Kashgar, and then following the Karakoram Highway over Khunjerab Pass into the extremely beautiful Hunza Valley deep in Karakoram Mountain Range in Pakistan-controlled Kashmir.

From the very moment I heard about this ancient trade road, the Silk Road had exerted an irresistible attraction for me. Its very name exuded a strong connotation of romanticism bequeathed by great travellers of the past who had set foot on it.

I have since visited other parts of the Silk Road. In March 2008, my wife and I spent 32 days exploring the Silk Road from Xian to Urumqi. Over 55 days in September to November 2010, we visited many old Silk Road cities in Iran and Turkey. In September 2011, we spent 35 days in Italy to visit Rome and many other cities. In November and December of the same year, we took 49 days to visit more old Silk Road cities in Central Asia and in May and June 2017, we spent 44 days in Bulgaria and Romania visiting yet more old Silk Road cities among other places.

Most people think of the ancient Silk Road as a single road extending westwards from Chang-an (present day Xian) to Rome, over a distance of about 6,500km. But the name Silk Road is really a misnomer in more ways than one. It is actually a network of roads between the East

Ir. Chin Mee Poon Ir. Chin Mee Poon is a retired civil engineer who derives a great deal of joy and satisfaction from travelling to different parts of the globe, capturing fascinating insights of the places and people he encounters and sharing his experiences with others through his photographs and writing.

and the West which allowed not only commodities to move one way or the other but, more importantly, it also facilitated the propagation of knowledge, technologies, ideologies, cultures and religions over a very large area.

So when German geographer and explorer Ferdinand von Richtofen first gave this network of roads the moniker “die Silkenstrasse” (The Silk Road) in 1877, he created two misleading connotations: That there was only one road and that silk was the only commodity that mattered.

Silk was undoubtedly very precious to the westerners before they stole the secret of silk making from the Chinese1, but many other equally valuable goods also moved along the routes, not necessarily between China and the West, but between countries along the way as well.

The roads forming the network not only ran in an east-west direction but north-south as well. This dense network of roads would have certainly taken a very long time to evolve. No single person or country could claim credit for its creation. Many of the roads passed through territories with very hostile climates or peoples, so traders plying the routes often faced

MAY 2020

tremendous risks of losing their goods and even their lives. Most confined their activities to a small section of the road, so a piece of silk would have gone through many hands before it reached the western market.

The great Tang Dynasty Buddhist monk, Xuan Zang of China, made a very long journey on the Silk Road from Chang-an to India to study Buddhism in early 7th century AD. More than 6 centuries later, Marco Polo of Venice followed his father and uncle to the Yuan Dynasty capital of present-day Beijing, also by way of the Silk Road.

These two great travellers are rare examples of the very few people who succeeded in traversing the ancient Silk Road extensively.

The Silk Road began its decline with the start of the industrial revolution in Europe and when many countries became maritime powers which sent fleets of cargo ships out to ply the high seas. Today, the ancient Silk Road remains a symbol of bygone romanticism waiting for intrepid travellers to unearth its past glories.

References: 1. Smuggling of silkworm eggs into the Byzantine Empire https://en.wikipedia.org/wiki/Smuggling_ of_silkworm_eggs_into_the_Byzantine_Empire

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

41



 

    

 

   



























    









 





    

   

 



   





KEAHLIAN CONTINUATION FROM MAY ISSUE 2020 PERMOHONAN MENJADI AHLI ‘COMPANION’ No. Nama Kelayakan Ahli KEJURUTERAAN MEKANIKAL

104302 105506 105509 104905 104301 104276

AHMAD ZULHAIRIE BIN MUSTAFA AMMAR BIN ZULKIFLI HO HAO HANN

M.E.HONS.(ICL)(MECHANICAL, 2009) B.E.HONS.(UPM)(MECHANICAL, 2009) B.E.HONS.(UTM)(MECHANICAL, 2007) KRISHNA KUMAR B.E.HONS.(MMU)(MECHANICAL, 2009) MOHAMAD HAMZAH B.E.HONS.(UTP)(MECHANICAL, BIN DAHLAN 2007) SURESH A/L B.E.HONS.(UTP)(MECHANICAL, MUNUSAMY 2006)

KEJURUTERAAN MEKATRONIK 105511

SHUKRI B. KORAKKOTTIL KUNHI MOHD

B.E.HONS.(USM) (MECHATRONICS, 2006)

PERMINDAHAN KEPADA AHLI SISWAZAH No. Nama Kelayakan Ahli KEJURUTERAAN ALAM SEKITAR

90226

GAN JIA MIN

52712

LEE YAN BIN

81044

LIM WOAN YIH

85551

NG JIE JIAN

72535

NG JIT JANG

74729

TAN SHI CHING

81880

TAY MING XIAN

KEJURUTERAAN AWAM 56635 69730 88575 77904 77184 84984 76983 54471 81145 32954

47912

22181

43697

52179 41664 81367 81097 47485 88890 94743 80116 63931 47498 94054

AHMAD FADHLI BIN ABDULLAH AIDA FATHIRAH BINTI MOHD FARIDZ AWANG AIMAN BIN AWANG AHMAD BERNARDINE BINTI BENEDICT SUNGGOH CHAN WAI KIT CHOW YONG JIN

B.E.HONS.(UTAR KAMPAR) (ENVIRONMENTAL, 2019) B.E.HONS.(UTAR) (ENVIRONMENTAL, 2016) B.E.HONS.(UTAR) (ENVIRONMENTAL, 2016) B.E.HONS.(UTAR KAMPAR) (ENVIRONMENTAL, 2019) B.E.HONS.(UTAR KAMPAR) (ENVIRONMENTAL, 2019) B.E.HONS.(UTAR KAMPAR) (ENVIRONMENTAL, 2019) B.E.HONS.(UTAR) (ENVIRONMENTAL, 2016)

72317 68521 35921 81375 69703 87306 21119 84733 54792 87002 55745 68601 63997 72787 84712 72274 50974 56691 69103 64068 32974

33266 33171 89962

B.E.HONS.(UiTM)(CIVIL, 2015)

40538

B.E.HONS.(UNIMAS)(CIVIL, 2017) B.E.HONS.(UCTS)(CIVIL, 2017)

69190

B.E.HONS.(UNIMAS)(CIVIL, 2018)

77113

B.E.HONS.(USM)(CIVIL, 2018) B.E.HONS.(UTAR SG LONG) (CIVIL, 2019) B.E.HONS.(USM)(CIVIL, 2018) B.E.HONS.(UiTM)(CIVILINSFRASTRUCTURE, 2014) B.E.HONS.(UMS)(CIVIL, 2018)

CHUAH HOI CHING CYRILLA BINTANG ISSAC DELANEY DEFFANNY DASING DR NUR IZZATI BINTI B.E.HONS.(UiTM)(CIVIL, 2009) AB RANI M.Sc.(UiTM)(CIVILCONSTRUCTION, 2012) PhD.(UTM)(2018) DR MAZLINA ZAIRA B.E.HONS.(UiTM)(CIVIL, 2011) BINTI MOHAMMAD MBA.(UiTM)(2013) PhD.(ASIAN INST. OF TECH.) (2017) DR NOR AZLINA B.E.HONS.(UPM)(CIVIL, 2004) BINTI ALIAS M.Sc.(UPM)(WATER RESOURCES, 2006) PhD.(UNITEN)(ENGINEERING, 2017) DR YIP CHUN CHIEH B.E.HONS.(SWINBURNE UNI. OF TECH.)(CIVIL, 2012) M.E.(UTM) (CIVIL-STRUCTURE, 2014) PhD.(UTM)(CIVIL, 2018) EFFA NATRAH BINTI B.E.HONS.(UNIMAS)(CIVIL, MOHAMAD RIDUAN 2016) FAUZUHANA BINTI B.E.HONS.(UTHM)(CIVIL, 2012) ANAS M.E.(UPM)(HIGHWAY & TRANSPORTATION, 2013) GOH QIU YOU B.E.HONS.(IUKL)(CIVIL, 2017) GOH SIEW FANG B.E.HONS.(UMS)(CIVIL, 2018) HII CHU MEE, B.E.HONS.(UKM)(CIVIL & SAMUEL STRUCTURAL, 2012) HII JUN HAO, KENNY B.E.HONS.(SWINBURNE UNI. OF TECH.)(CIVIL, 2019) HONG YIN KIT B.E.HONS.(UTAR SG LONG) (CIVIL, 2019) JASREENA KAUR B.E.HONS.(UNITEN)(CIVIL, A/P HARJIT SINGH 2018) KEW YOU WEI B.E.HONS.(UTHM)(CIVIL, 2017) KHAIRUL DANIAL B.E.HONS.(UMP)(CIVIL, 2011) BIN ABD LATIF KHALIESA BINTI B.E.HONS.(UiTM)(CIVIL, 2017) RAMLI

76405 41960 40322 56745 67876 69832 33487 80967

KOH YI SHENG KUEH ZHEN HUA, DEAN LAI YUAN ZHEN LEE DI SHEN LIM ENG CHUAN LIM JIA-YOUNG, TIMOTHY LOH ENG KENG

B.E.HONS.(UTAR)(CIVIL, 2017) B.E.HONS.(MONASH)(CIVIL, 2017) B.E.HONS.(UTM)(CIVIL, 2010) B.E.HONS.(IUKL)(CIVIL, 2017) B.E.HONS.(UTM)(CIVIL, 2017) B.E.HONS.(MONASH UNI.) (CIVIL, 2018) B.E.HONS.(UTM) (CIVIL-CONSTRUCTION MANAGEMENT, 2001) LOH YONG CHIAT B.E.HONS.(UNI. OF MALAYA) (CIVIL, 2016) LOW VEN SIANG BE.HONS.(UTHM)(CIVIL, 2015) LOW WAI SHEN, B.E.HONS.(UTAR SG LONG) GARY (CIVIL, 2019) MOHAMAD ZAID BIN B.E.HONS.(UNISEL)(CIVIL,2014) MOHAMAD TRUDIN MOHD ASYRAF BIN B.E.HONS.(UMS)(CIVIL, 2017) ISMAIL MOHD NOR AFANDI B.E.HONS.(UTHM)(CIVIL, 2016) B. RAMANI MUHAMMAD B.E.HONS.(UTP)(CIVIL, 2017) ASYRAF B MOHD SYAZWAN MUHAMMAD DANIEL B.E.HONS.(UNI. OF MALAYA) BIN CHE MOHD (CIVIL, 2017) NOOR MUHAMMAD HABIB B.E.HONS.(IUKL)(CIVIL, 2016) HANIS BIN BADRUL HISHAM MUHAMMAD NAZRIN B.E.HONS.(USM)(CIVIL, 2015) SHAH BIN MOHD ASRI MUHAMMAD B.E.HONS.(UiTM)(CIVILSYAZWAN BIN INFRASTRUCTURE, 2015) BAHARUM NASIR NIZAMUDDIN AZIM B.E.HONS.(UiTM)(CIVIL, 2016) B. ZAHARY NOOR HASYIMAH B.E.HONS.(UTHM)(CIVIL, 2016) BT. AWANG NOR IKHWAN BIN B.E.HONS.(UTM)(CIVIL, 2009) KHALID M.E.(UTM)(CIVILTRANSPORTATION & HIGHWAY, 2011) NORDALILY BINTI B.E.HONS.(UiTM)(CIVIL, 2009) AB LLAH NUR AIN BINTI B.E.HONS.(UiTM)(CIVIL, 2010) ROSDI NUR NADHIRAH BT B.E.HONS.(UiTM)(CIVIL, 2018) BASHIR AHAMED NUR SABRINA BINTI B.E.HONS.(UTM)(CIVIL, 2011) TOMIRAN M.E.(UTM)(CIVILGEOTECHNICS, 2013) NUR SYA'FIQA BINTI B.E.HONS.(UiTM)(CIVIL, 2016) JAMALUDDIN M.Sc.(UiTM)(ENVIRONMENTAL, 2018) NURFADHILAH B.E.HONS.(UiTM)(CIVILAMIRAH BT CHE INFRASTRUCTURE, 2016) KAMARUDDIN OOI SHI YI B.E.HONS.(UTHM)(CIVIL, 2018) RONZE BIN ROS B.E.HONS.(UTHM)(CIVIL, 2012) AHMAD SITI FATIMAH BINTI B.E.HONS.(UTM)(CIVIL, 2011) MOHD SALEH SITI SALBIAH BINTI B.E.HONS.(UiTM)(CIVILMOHAMAD INFRASTRUCTURE, 2015) SYED MUHAMMAD B.E.HONS.(UiTM)(CIVIL, 2016) BAHTHIAR BIN SYED M.E.(UTM)(GEOTECHNICS, OSMAN 2018) TAN CHOON HONG B.E.HONS.(UNIMAS)(CIVIL, 2017) WALTER JANTING B.E.HONS.(UiTM)(CIVIL, 2010) ANAK NGELAMBAI WONG CHOO ZEN, B.E.HONS.(MONASH UNI.) JOSHUA (CIVIL, 2018)

KEJURUTERAAN BIO-PERUBATAN 80396

HENG YEH TAT

B.E.HONS.(UTAR SG LONG) (BIOMEDICAL, 2019)

KEJURUTERAAN ELEKTRIKAL 74011

84827 40676 66513 66517 62987 55594 78229 29307

AFEEFA ATHIRAH BINTI MUSA AHMAD AZEEM IRHAM BIN AZMAN AZYYATI BINTI OSMAN KUHAN A/L ARUMUGASAMY LIM WEI HONG

B.E.HONS.(UiTM)(ELECTRICAL, 2018) B.E.HONS.(UiTM)(ELECTRICAL, 2017) B.E.HONS.(UTHM) (ELECTRICAL, 2010) B.E.HONS.(MMU)(ELECTRICAL, 2017) B.E.HONS.(MMU)(ELECTRICAL, 2015) LING SUI FENG, LILY B.E.HONS.(UTeM)(ELECTRICALCONTROL, INSTRUMENTATION & AUTOMATION, 2017) MOHAMMAD NAQIB B.E.HONS.(UTHM) 'IFWAT BIN ROSLI (ELECTRICAL, 2016) MOHD NUBLAN B.E.HONS.(UiTM)(ELECTRICAL, HAKIMI BIN MOHD 2016) ASRI MOHD RUZAIMI BIN B.E.HONS.(UMP) MOHD ARIFFIN (ELECTRICAL-CONTROL & INSTRUMENTATIONS, 2008) M.E.M.(UPM)(ENGINEERING, 2016)

JUNE 2020

95766

ONG YING TEIK

89280

TAN CHONG CHOOR, RAYMOND

99332

WONG CHANG SHENG

B.E.HONS.(UNITEN) (ELECTRICAL & ELECTRONICS, 2017) B.E.HONS.(UTAR SG LONG) (ELECTRICAL & ELECTRONIC, 2019) B.E.HONS.(UCTS)(ELECTRICAL, 2018)

KEJURUTERAAN ELEKTRONIK 76158 81101 25138 73312 90295 73969 70192 54641 56093 30066

AHMAD ZA'IMUL B.E.HONS.(UTHM) UMAM BIN MUSTAFA (ELECTRONIC, 2018) KAMAL CHAI MING CHENG B.E.HONS.(UMS)(ELECTRONICCOMPUTER, 2018) DG ZARINAH BINTI B.E.HONS.(UiTM)(ELECTRICAL, ABD RAZAK 2007) EFFA ALYIA BINTI B.E.HONS.(IUiTM) SAKDUN (ELECTRONICS, 2017) JONATHAN AARON B.E.HONS.(MMU) HENDRIKS (ELECTRONICS -ROBOTICS & AUTOMATION, 2018) NOR BALQIS BT B.E.HONS.(UiTM) MOHD NOOR (ELECTRONICS, 2017) RICK FALCO B.E.HONS.(UNIMAS) POLODIUS (ELECTRONICTELECOMMUNICATIONS, 2017) RUSDIE BIN PADU B.E.HONS.(UTHM) (ELECTRONIC, 2016) SITI NOR RAFIDAH B.E.HONS.(UTHM) BINTI MD SAAD (ELECTRONIC, 2016) TAN EARN TZEH B.E.HONS.(USM) (MECHATRONICS, 2011) M.Sc.(USM)(ELECTRICAL & ELECTRONIC, 2014)

KEJURUTERAAN KIMIA 87010

81320

ABDUL SYAKIR BIN ABDUL WAHAB CHAN KAI YIN

85002

CHON WEN-XIAN

74576

CHONG MIN YEE

74631

FOONG KOK CHONG JAGATHEES KUMAR A/L SANNA MOORTHY JEGADISH PADMANABHAN KA JEN HAU, BRANDON KOI ZI KANG

78584 99218 70070 71030 80382

LAW SER CHYEN

72331

LOW KAR KING

78028

LOW SHAO LUN

71019

29421 74570

MOHANA A/P SUPPAYAH PRAIMON A/L N JANAGARAJAN TAN INN SHI TANG KHAI WENG

69463

TEY SU-YI

96139

WONG WAN YING

85353

B.E.HONS.(UTM)(CHEMICAL PROCESS, 2018) B.E.HONS.(UTAR SG LONG) (CHEMICAL, 2019) B.E.HONS.(UTAR SG LONG) (CHEMICAL, 2019) B.E.HONS.(CURTIN UNI.) (CHEMICAL, 2018) B.E.HONS.(UTAR)(CHEMICAL, 2015) B.E.HONS.(UMP)(CHEMICAL, 2017) B.E.HONS.(UTAR KAMPAR) (PETROCHEMICAL, 2019) B.E.HONS.(UNIMAS) (CHEMICAL, 2017) B.E.HONS.(UTP)(CHEMICAL, 2018) B.E.HONS.(UTAR SG LONG) (CHEMICAL, 2019) B.E.HONS.(UTAR SG LONG) (CHEMICAL, 2019) B.E.HONS.(UTAR SG LONG) (CHEMICAL, 2019) B.E.HONS.(UTP)(CHEMICAL, 2018) B.E.HONS.(MIU UNI.) (CHEMICAL, 2018) B.E.(UMP)(CHEMICAL, 2010) B.E.HONS.(CURTIN UNI.) (CHEMICAL, 2017) M.E.HONS.(THE UNI. OF NOTTINGHAM)(CHEMICAL, 2017) B.E.HONS.(UTAR SG LONG) (CHEMICAL, 2019)

KEJURUTERAAN MEKANIKAL 77501 69847 76973 63536 69372 97780 65980 97141 60707 96156 84986 63603 63292

'ABDUR RAHMAN BIN HAMID AHMAD FAIQ WAFI B. AB. PATAH AIDA FARZANA CHE HUSNI AMMELINA DAYANA BT. MOHD FAZIL CHEW SHU REN

B.E.HONS.(UTHM) (MECHANICAL,2015) B.E.HONS.(UTM)(MECHANICAL, 2017) B.E.HONS.(UiTM)(MECHANICALMANUFACTURING, 2017) B.E.HONS.(UTHM) (MECHANICAL, 2017) M.E.HONS.(UNI. OF NOTTINGHAM, MECHANICAL, 2017) CHUNG SU SAM B.E.HONS.(QUT)(MECHANICAL, 2018) JULIANA OMAR BT. B.E.HONS.(UNISEL) ABDULLAH (MECHANICAL, 2016) KEONG LE-ONN B.E.HONS.(TAR UNI.COLL.) (MECHANICAL, 2018) KOH KELLY B.E.HONS.(UTP)(MECHANICAL, 2017) KOON XUAN XIAO B.E.HONS.(UTAR SG LONG) (MECHANICAL, 2019) LAI CHUN CHEN B.E.HONS.(UTAR SG LONG) (MECHANICAL, 2019) LOW EE SOONG B.E.HONS.(UTHM) (MECHANICAL, 2017) MOHAMAD B.E.HONS.(UTeM) AZIZUDDIN B. MOHD (MECHANICAL-DESIGN & AZMAN INNOVATION, 2017)

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

41

KEAHLIAN 71003

MOHAMAD ROSMAN BIN MOHAMAD RAZIF MOHD NOORHAFIZ BIN SHAHIDIN MUHAMMAD HAZMAN BIN ABD AZIZ NIK MOHD HANIF BIN NIK ALWI

30431 75683 32263 69993

PHILLIP MAPANG ANAK ANGKING

86931

PRYA SUTHAN A/L SATHIANANTHAN SHARON GELINGIE ANAK ELECTS SYED HAMZAH BIN SYED OTHMAN

77596 32261 66661

TAN SHIM SHEN

51893

TEO KOK ENG

63848

THARMARAJ A/L SREEDHARAN UMASUTHAN A/L JANASEKKER WAN MUHAMAD ANIQ AIMAN BIN W ZAINUDDIN

89077 67753

B.E.HONS.(UTP)(MECHANICAL, 2018) B.E.HONS.(UiTM)(MECHANICAL, 2010) B.E.HONS.(UiTM)(MECHANICAL, 2018) B.E.HONS.(UTeM) (MECHANICAL-STRUCTURE & MATERIAL, 2009) B.E.HONS.(UNIMAS) (MECHANICAL & MANUFACTURING, 2017) B.E.HONS.(UKM)(MECHANICAL, 2016) B.E.HONS.(UNIMAS) (MECHANICAL,2018) B.E.HONS.(UTeM) (MECHANICAL-STRUCTURE & MATERIALS, 2008) BE.HONS.(UNITEN) (MECHANICAL, 2016) B.E.HONS.(UNIMAS) (MECHANICAL & MANUFACTURING, 2015) B.E.HONS.(UTHM) (MECHANICAL, 2017) B.E.HONS.(MONASH UNI.) (MECHANICAL, 2018) B.E.HONS.(UiTM) (MECHANICAL,2017)

KEJURUTERAAN MEKATRONIK 50085

LOH YUEN PENG

63035 88907

MOHD RIDZWAN SHAH BIN MAROT TAN YEW JIN

80301

YAP YUAN PING

B.E.HONS.(UCSI) (MECHATRONICS, 2013) B.E.HONS.(UTeM) (MECHATRONICS, 2018) B.E.HONS.(UTAR) (MECHATRONICS, 2018) B.E.HONS.(UTAR SG LONG) (MECHATRONICS, 2019)

KEJURUTERAAN MIKROELEKTRONIK 53222

MOHD ASRAF BIN HARON

BE.HONS.(UniMAP) (MICROELECTRONICS, 2012)

KEJURUTERAAN PEMBUATAN 96147

FOO TEE WEI

B.E.HONS.(UTAR SG LONG)(MATERIALS & MANUFACTURING, 2019) LAU SIE CHIEK, B.E.HONS.(UTeM) JEREMY (MANUFACTURING-ROBOTICS & AUTOMATION, 2017) MUHAMMAD HARITH B.E.HONS.(UKM) BIN ABDUL KADIR (MANUFACTURING, 2012) MUHAMMAD NOOR B.E.HONS.(UKM) FAHMY MAULA (MANUFACTURING, 2018) FAZARNDIR NG QI MUN B.E.HONS.(UTeM) (MANUFACTURINGMANUFACTURING MANAGEMENT, 2016)

64314 48171 69632 62153

KEJURUTERAAN PERTANIAN 41446

LEONG KAH CHYE

B.E.HONS.(UPM) AGRICULTURAL & BIOSYSTEM, 2013)

104288 104306 105249 105244 104844 105519

CHIN CHUNG WEI CHIONG SWEE KAK CHONG YEE ZHENG, CLEMENT

104908 105638

CHOOI YONG HOW DARVINTHAREN A/L GOVINDASAMY DR FONG WEN JING, DICKSON

105242

105265

105663 105266

POON CHEE HIM

B.E.HONS.(UTP)(PETROLEUM, 2018)

PERMOHONAN MENJADI AHLI SISWAZAH No. Nama Kelayakan Ahli KEJURUTERAAN AEROANGKASA

105597

MUHAMMAD ZAKWAN BIN HISAMMUDDIN

B.E.HONS.(IIUM)(AEROSPACE, 2018)

KEJURUTERAAN ALAM SEKITAR 104325

KHAW EU HAN

104870

LAI LI SZE

KEJURUTERAAN AWAM 105608 105626 105607 105520 105256 105665

42

AHMAD SULAIMAN BIN MOHAMAD ALYSSA HEERA ASING AMIRAH NABIHAH BINTI ISMAIL AMIRAH SHAHIRAH BINTI SHAMSUL BAHRIN ANG WEI XIAN

ARIF BIN MOHD DANI

JURUTERA

B.E.HONS.(UTAR KAMPAR) (ENVIRONMENTAL, 2019) B.E.HONS.(UniMAP) (ENVIRONMENTAL, 2012)

B.E.HONS.(UTM)(CIVIL, 2018) B.E.HONS.(UTM)(CIVIL, 2018)

DR LEONG KAH HON DR SHIN TO AMIRI

105653

FOO DUN YU HAMDI BIN MOHAMAD AZIZ JAUHAR NAFIS BIN JOHARI KHAIRUL NIZAM BIN BERAHIM @ IBRAHIM KHAIRUNNISA BINTI KAMDI KONG YIT PIN

104290 105592 105525 105233 104607 104916

LACHMI SRI A/P MANOHARAN LAM WEN QIAN

104299

LAU ZHEN XIANG

105603

LEE JIAN HAN

105610 104309

LEE KIM LOONG LEE TZE YEI

104277 105667 105254 105516

LIEW WEI CHERN LIEW ZHEN MIN, EDMUND LIM FU HWI LOH WEI KIEN

105235

LOH ZHI PIN

105523

MEGAT MUS'AB BIN MEGAT JOHARI MOHAMAD AFIZI BIN JAMADIN MOHAMMAD MOKHSEN BIN HAMZAH@MD. JAN MOHAMMAD SYAZWAN BIN MOHD AYOB MOHD FADIL BIN HUSHIN

104602 104614 105601 105238 105618 105633 105248 105591 105590 104304 105522

B.E.HONS.(USM)(CIVIL, 2015)

DR HUZAIFA BIN HASHIM

104871

KEJURUTERAAN PETROLEUM 68536

AZRIN HELMI BIN MOHD GHAZALI CHEN CHO' LIN, JOSEPH CHEW ZHAO YIN

105258 105609 105596

B.E.HONS.(UNI. OF MALAYA) (CIVIL, 2016)

105614

M.E.HONS.(THE UNI. OF NOTTINGHAM)(CIVIL, 2018) B.E.HONS.(UiTM)(CIVIL, 2016)

104287

105620

MOHD FAIRUZ BIN TAHA MOHD HARIS BIN HAMIZAN MOHD ZAHIR BIN SALLEH MUHAMMAD IZZAT BIN NOOR EZZUDDIN MUHAMMAD MUSLIM BIN RAMLE MUHAMMAD SHAFIQ AIMAN BIN AHMRAN NABIL FIKRI BIN MOHD. NADZMI NOR AZLIANA BINTI KAMARUDDIN NUR AIN BINTI HARUN NUR ATHIRAH BINTI MASHUM NUR FATIYAH BINTI AHMAD SHOKRI NURHANA AZLIN BINTI YAHAYA NURLENA MARIA BINTI QUADRA

THE INSTITUTION OF ENGINEERS, MALAYSIA

B.E.HONS.(UiTM)(CIVIL, 2009)

104846

ONG CHYI SIANG

B.E.HONS.(SWINBURNE UNI. OF TECH.)(CIVIL, 2014) M.E.HONS.(THE UNI. OF NOTTINGHAM)(CIVIL, 2019) B.E.HONS.(UTAR)(CIVIL, 2012) B.E.HONS.(UTHM)(CIVIL, 2013) B.E.HONS.(CURTIN UNI. OF TECH.)(CIVIL & CONSTRUCTION, 2015) B.E.HONS.(UTM)(CIVIL, 2016) B.E.HONS.(USM)(CIVIL, 2018)

105241 105662

OOI WEI KIAT RAHSIDI SABRI BIN MUDA REZKY MULIA

M.E.HONS.(THE UNI. OF NOTTINGHAM)(CIVIL, 2013) PhD.(THE UNI. OF NOTTINGHAM)(2018) B.E.HONS.(UTM)(CIVIL, 2008) M.E.Sc.(UNI. OF MALAYA) (STRUCTURAL, 2011) PhD.(UNI. OF MALAYA)(2017) B.E.HONS.(UTHM)(CIVIL, 2009) PhD.(UNI. OF MALAYA)(2015) B.E.(ISLAMIC AZAD UNI.)(CIVIL, 2010) M.E.(UTM)(CIVILGEOTECHNICS, 2012) PhD.(UTM)(CIVIL, 2018) B.Sc.(TH EOHIO STATE UNI.) (CIVIL, 2018) B.E.HONS.(UTM)(CIVIL, 1989) B.E.HONS.(UiTM)(CIVIL, 2012) B.E.HONS.(UTM)(CIVIL, 1997) B.E.HONS.(UNI. OF MALAYA) (CIVIL, 2016) B.E.HONS.(UNI. OF MALAYA) (CIVIL, 2008) B.E.HONS.(UTP)(CIVIL, 2016) M.E.HONS.(THE UNI. OF NOTTINGHAM)(CIVIL, 2018) M.E.HONS.(UNI. OF NOTTINGHAM)(CIVIL, 2013) M.E.HONS.(THE UNI. OF NOTTINGHAM)(CIVIL, 2019) B.E.HONS.(IUKL)(CIVIL, 2016) B.E.HONS.(UNI. OF NOTTINGHAM)(CIVIL, 2013) M.Sc.(HERIOT WATT UNI.) (CIVIL ENGINEERING & CONSTRUCTION MANAGEMENT, 2017) B.E.HONS.(UTAR)(CIVIL, 2016) B.E.HONS.(UCSI UNI.)(CIVIL, 2018) B.E.HONS.(UPM)(CIVIL, 2018) B.E.HONS.(UKM)(CIVIL & STRUCTURAL, 2018) B.E.HONS.(UNI. OF MALAYA) (CIVIL, 2017) B.E.HONS.(UPM)(CIVIL, 2016) B.E.HONS.(UiTM)(CIVIL, 2009) B.E.HONS.(UiTM)(CIVIL, 2012) B.E.HONS.(UiTM)(CIVIL, 2012) B.E.HONS.(UTM) (CIVIL-CONSTRUCTION MANAGEMENT, 2006) B.E.HONS.(UTM)(CIVIL, 2015) B.E.HONS.(KLIUC)(CIVIL, 2010)

104606 105239 104907

105231

ROSLEE BIN ISMAIL SAIDAHTUL ASHIKIN BINTI HASSAN SALEH BIN SHAUDI SHAHRUL AZHAR BIN ZAINAL ABIDIN SIM LIANG SHIN

104605

SIM YU SHENG

104842 105230

105625

TAN GAIN HOW

105263

TAN QI KANG

104854 104292

TAN YANN KHIN TENNYSON ANAK EDMUND DAGING TEOH KEAT SENG, JACKSON THAM WAI YANG THOMAS ANAK JULIUS TIMOTHY SYLVESTER CHONG TING FENG NEE, TIFFANY WONG YIN HAU, GEORGE YAP HONG THIEN, GEORGE YOON CHAN YIP

105649 104293 105611 105518 105632 104315 105666 104843

105634

B.E.HONS.(UTM)(CIVIL, 2014)

B.E.HONS.(UTM)(CIVIL, 2015)

105645

104303

105534

DR CHAN BEE TING

104912

LOW WAN SHI

104318

PANG CHEE CHOONG, HARRIS

B.E.HONS.(UNI. OF MALAYA) (BIO-MEDICAL, 2011) M.E.Sc.(UNI.OF MALAYA)(2013) PhD.(UNI.OF MALAYA)(2018) B.E.HONS.(UNI. OF MALAYA) (BIO-MEDICAL, 2012) B.E.HONS.(UTAR SG LONG) (BIO-MEDICAL, 2019)

KEJURUTERAAN ELEKTRIKAL 105622 104868 105600

AMIRUL ALIF MASROL ATIQAH HAMIZAH BINTI MOHD NORDIN AZMAN BIN SANRAI

105588

CHANG JIANG HONG

105654

COVEY SUTHERLAND TIMOTHY DR LEE CHIA PING

105644

104284

DR MADIHAH BINTI MD RASID

105599

DZESMILSON DARYLL ANAK DESMOND GANI EVONNE ANAK DERASEN FRED BIN RASIUS

104859 104310 105647

ISMAIL BIN MOHD SHARIFF

105246

IZZUL HAZIQ BIN ZOLKIFLI

B.E.HONS.(UTM)(CIVIL, 2016)

JUNE 2020

B.E.HONS.(UTAR SG LONG) (CIVIL, 2019) B.E.HONS.(MONASH UNI.) (CIVIL, 1998) M.E.HONS.(THE UNI.OF NOTTINGHAM)(CIVIL, 2015) M.E.(UTM)(GEOTECHNICS, 2018)

KEJURUTERAAN BIO-PERUBATAN

B.E.HONS.(UiTM)(CIVIL, 2014)

M.E.(UMIST-THE VISTORIA UNI. OF MANCHESTER)(CIVIL, 2002)

B.E.HONS.(THE UNI. OF AUCKLAND)(CIVIL, 2018) B.E.HONS.(USM)(CIVIL, 2017)

B.E.HONS.(UniMAP) (MATERIALS, 2016) DR DAYANG SITI B.E.HONS.(USM) HAZIMMAH BINTI ALI (MATERIALS, 1999) M.Sc.(USM)(MATERIALS, 2000) PhD.(UMP)(CIVIL, 2015) MOHD ROSLI BIN B.E.HONS.(UNI. OF MALAYA) MOHAMAD (MATERIALS, 2000)

B.E.HONS.(UMP)(CIVIL, 2012)

B.E.HONS.(UiTM)(CIVIL, 2012)

B.E.HONS.(UNITEN)(CIVIL, 2013) B.E.HONS.(USM)(CIVIL, 2016) B.E.HONS.(UiTM)(CIVIL, 2013)

BALAN A/L VIJIAN

B.E.HONS.(UniMAP)(CIVIL, 2015) B.E.HONS.(UiTM)(CIVIL, 2014)

B.E.(UNIVERSITAS ISLAM INDONESIA)(CIVIL, 2013) B.E.HONS.(UNISEL)(CIVIL, 2009) B.E.HONS.(UKM)(CIVIL & STRUCTURAL, 2007) B.E.HONS.(UiTM)(CIVIL, 2007) B.E.(PORTMOUTH POLYTECHNIC)(CIVIL, 1986) B.E.HONS.(SWINBURNE UNI. OF TECH.)(CIVIL, 2011) B.E.HONS.(SWINBURNE UNI.OF TECH.)(CIVIL, 2014) M.E.(SWINBURNE UNI. OF TECH.)(2017) B.E.HONS.(UNI. OF SOUTH AUSTRALIA)(CIVIL, 2016) B.E.HONS.(UNITEN)(CIVIL, 2017) B.E.HONS.(UTAR)(CIVIL, 2013) B.E.HONS.(UiTM)(CIVIL, 2012)

KEJURUTERAAN BAHAN

B.E.HONS.(UTHM)(CIVIL, 2008) B.E.HONS.(UNITEN)(CIVIL, 2015)

B.E.HONS.(INTI INT.UNI.)(CIVIL, 2015) B.E.HONS.(UPM)(CIVIL, 2017) B.E.HONS.(UTM)(CIVIL, 2018)

B.E.HONS.(UTP)(ELECTRICAL & ELECTRONICS, 2018) B.E.HONS.(UKM)(ELECTRICAL & ELECTRONIC, 2008) M.E.(UiTM)(ELECTRICAL, 2012) B.E.HONS.(UTHM) (ELECTRICAL, 2011) B.E.HONS.(SWINBURNE UNI. OF TECH.)(ELECTRICAL & ELECTRONIC, 2018) M.E.HONS.(THE UNI. OF SHEFFIELD)(ELECTRICAL, 2018) B.E.HONS.(UTP)(ELECTRICAL & ELECTRONICS, 2009) M.E.(UNITEN) (ELECTRICAL, 2011) PhD.(UNITEN)(2015) B.E.HONS.(UTM) (ELECTRICAL, 2009) M.E.(UTM)(ELECTRICALPOWER, 2012) PhD.(KYUSHU UNI.) (ELECTRICAL & ELECTRONIC, 2016) B.E.HONS.(UNITEN) (ELECTRICAL & ELECTRONICS, 2013) B.E.HONS.(UTHM) (ELECTRICAL, 2008) B.E.HONS.(UMS)(ELECTRICAL & ELECTRONIC, 2008) B.E.TECH.HONS.(UniKL) (ELECTRICAL, 2009) BEM GRADUATE ENGINEER REGISTRATION BRIDGING COURSE (UniKL BET) (ELECTRICAL, 2019) B.E.HONS.(UNITEN) (ELECTRICAL POWER, 2015)

KEAHLIAN 105528 105532 105615 105517 105661 104319 105635 105621 104841 105637 104609 105545

104307 105630 105526 104281 104863 105624 104296 105598 104861 105250 104278 105252 104285 105657 105261

KAYSHEYEN A/L GANESH ANANTHAN KHALID BIN MD REJAB LIM MUN SIENG

B.E.HONS.(UTHM) (ELECTRICAL, 2012) B.E.HONS.(UNITEN) (ELECTRICAL POWER, 2016) M.E.HONS.(THE UNI. OF MANCHESTER)(ELECTRICAL & ELECTRONIC, 2018) LOOI MING SUM B.E.HONS.(UTHM) (ELECTRICAL, 2009) MADUHARAN A/L B.E.HONS.(UNITEN) SANKARAN (ELECTRICAL & ELECTRONICS, 2012) MAH KEL VIN B.E.HONS.(UTAR SG LONG) (ELECTRICAL, 2019) MASHITAH BINTI B.E.HONS.(UTP)(ELECTRICAL & MOKHTAR ELECTRONICS, 2012) MOHAMAD AMIRUL B.E.HONS.(UNIKL) HANIF BIN SHUIB (ELECTRICAL, 2017) MOHAMAD HAZIQ B.E.HONS.(UTM)(ELECTRICALBIN MOHAMAD INSTRUMENTATION & FADLI CONTROL, 2015) MOHAMED RAJAIE B.E.HONS.(UTM)(ELECTRICAL, BIN ABD HALIM 2018) MOHAMMAD HAFIZ B.E.HONS.(UNITEN) BIN OTHMAN (ELECTRICAL & ELECTRONICS, 2018) MOHAMMAD IZARUL B.E.HONS.(UTM)(ELECTRICALHAQ BIN AWANG MECHATRONICS, 2008) M.E.(UTAR) (ELECTRICAL, 2018) MOHD FADZLULLAH B.E.HONS.(UTM)(ELECTRICAL, B ISMAIL 2015) MOHD HANIFF BIN B.E.HONS.(UTP)(ELECTRICAL & ABDUL HAMID ELECTRONICS, 2007) MOHD SHAIFUL B.E.HONS.(UTeM)(ELECTRICALASHWAT BIN MOHD INDUSTRIAL POWER, 2016) SHUKOR MOHD ZUL YUSRI B.E.HONS.(UTP)(ELECTRICAL & BIN MOHD AKHIR ELECTRONICS, 2007) MUHAMAD HANIF B.E.HONS.(UTeM)(ELECTRICALBIN SALIMAN INDUSTRIAL POWER, 2012) MUHAMAD HARISTH B.E.HONS.(MMU)(ELECTRICAL, BIN ABDUL RAZAK 2018) MUHAMAD LUTFI B.E.HONS.(UiTM)(ELECTRICAL, BIN ZAKARIA 2011) MUHAMMAD AFFIQ B.E.HONS.(UNIKL) BIN ABD RAHMAN (ELECTRICAL, 2018) MUHAMMAD B.E.HONS.(UTM)(ELECTRICAL, AMIN BIN AHMAD 2018) ZAKIYUDDIN MUHAMMAD B.E.HONS.(UTeM)(ELECTRICALFADZLULLAH BIN CONTROL, INSTRUMENTATION ABDUL AZIZ & AUTOMATION, 2010) MUHAMMAD FAIQ B.E.HONS.(UiTM)(ELECTRICAL, BIN MOHD DANI 2013) MUHAMMAD FAISAL B.E.HONS.(UTM)(ELECTRICAL, BIN OTHMAN 2018) MUHAMMAD NABIL B.E.HONS.(UNITEN) MUZAKKIR BIN (ELECTRICAL POWER, 2015) GHAZALI MUHAMMAD B.E.HONS.(UTM)(ELECTRICAL, ZULKIFLI BIN 2013) SULONG NAJMI BIN B.E.HONS.(UNIKL) MOHAMMED ANNAS (ELECTRICAL, 2018)

104906

NAMANI SRILAHARI

105650

NOR FATAHIYAH BINTI ZAKARIA NORAIDAH BINTI RAHABAN NURUL HIDAYAH BINTI MOHAMAD SAHUDI ROSHAFIZIN BINTI AYUB SABRI BIN WAHID

104856 105245 104855 104866 104860 104877 105606 105631 104911

SANTHIISH LECHMANAN SAZURANI BINTI ABDUL ZABIL SHAHIDAN BIN SIDEK SIEW KOK FOO

B.E.HONS.(AIMST UNI.) (ELECTRICAL & ELECTRONIC, 2018) B.E.HONS.(UTeM)(ELECTRICALINDUSTRIAL POWER, 2015) B.E.HONS.(UiTM)(ELECTRICAL, 2016) B.E.HONS.(UNI. OF MALAYA) (ELECTRICAL, 2015) B.E.HONS.(UNITEN) (ELECTRICAL POWER, 2009) B.E.HONS.(UiTM)(ELECTRICAL, 2011) B.E.HONS.(UniMAP) (ELECTRICAL SYSTEM, 2018) B.E.HONS.(UTM)(ELECTRICAL, 2013) B.E.HONS.(UTM)(ELECTRICAL, 2004) B.E.HONS.(MONASH UNI.) (ELECTRICAL & COMPUTER SYSTEMS, 2007) B.E.HONS.(UTM)(ELECTRICALELECTRONICS, 2002) B.E.HONS.(UniMAP) (ELECTRICAL SYSTEMS, 2010) B.E.HONS.(USM)(ELECTRICAL, 2010) B.E.HONS.(UTAR)(ELECTRICAL & ELECTRONIC, 2019) B.E.HONS.(SWINBURNE UNI. OF TECH.)(ELECTRICAL & ELECTRONIC, 2018) B.E.HONS.(UNITEN) (ELECTRICAL POWER, 2017) B.E.HONS.(UTP)(ELECTRICAL & ELECTRONICS, 2015)

105664

SITI SHAWARNI BINTI ABD HAMID SITI SUHAILA BT. ISMAIL TAN TZE YEEN

105668

TAN WEI SHENG

105268

TAN WENG YEOW

104297

THANISH RAJ A/L RAJAGOPAL TUAN MOHAMAD AZLI BIN TUAN MOHAMAD AFFANDI VOON YONG JIAN B.E.HONS.(UPM)(ELECTRICAL & ELECTRONICS, 2018) WAN HATIFAH B.E.HONS.(UTP)(ELECTRICAL & HANIN BINTI WAN ELECTRONICS, 2007) HASSAN ZULFARIZAL BIN B.E.HONS.(USM)(ELECTRICAL, MOHAMAD 2014)

105636

105229 104869 104280 105530

KEJURUTERAAN ELEKTRONIK 105262

AMIR FIRDAUS BIN AWGKU ISMAIL

104872

DR NURULAZLINA BINTI RAMLI

105613

FAIZ BIN ARITH

B.E.HONS.(UNIMAS) (ELECTRONICTELECOMMUNICATION, 2015) B.E.HONS.(UTM)(ELECTRICALTELECOMMUNICATIONS, 2008) M.Sc.(UiTM) (TELECOMMUNICATION & INFORMATION ENGINEERING, 2011) PhD.(UiTM)(ELECTRICAL, 2015) B.E.(UNI. OF FUKUI) (ELECTRICAL & ELECTRONIC, 2010) M.Sc.(UKM) (MICROELECTRONICS, 2012) PhD.(UNI. OF NEWCASTLE UPON TYNE)(2018)

UPCOMING ACTIVITIES WEBINAR - Technical Talk on “Industry4WRD: Digital Transformation Strategy for Engineering Firm” Date Time Venue Approved CPD Speaker

: : : : :

4 June 2020 (Thursday) 10.00 a.m. – 11.30 a.m.

Wisma IEM, 17- GoTo Webinar

0 Ir. Dr Tan Chee Fai

WEBINAR - Managing Production Operations for Offshore Facilities Date Time Venue Approved CPD Speaker

: : : : :

13 June 2020 (Saturday) 9.00 a.m. – 11.00 a.m.

Online Platform

0 Ir. Johan Adam Leong

JUNE 2020

104295

105652 105255 105619 105237 104238 105535 104308 104610

FATIMAH BINTI ABDUL HAMID

B.E.HONS.(UKM)(ELECTRICAL, ELECTRONIC & SYSTEM, 2002) M.Sc.(UKM)(ELECTRICAL, ELECTRONIC & SYSTEM, 2009) HANIS ADIBA BINTI B.E.HONS.(UiTM) MOHAMAD (ELECTRONICSCOMMUNICATION, 2012) KAMARU ADZHA BIN B.E.HONS.(UTM)(ELECTRICALKADIRAN TELECOMMUNICATION, 2004) LIEW HON CHIN B.E.HONS.(UTM)(ELECTRICALELECTRONICS, 2011) MOHAMAD SYAFIQ B.E.HONS.(IIUM) BIN MAZLI (ELECTRONICS-COMPUTER & INFORMATION, 2018) MUHAMMAD EIZZAT B.E.HONS.(UiTM)(ELECTRICAL, BIN ABDUL RAZZAK 2007) NUR ADILAH BT ABD B.E.HONS.(MMU)(ELECTRONICHAMID TELECOMMUNICATIONS, 2012) RAEIHAH BINTI B.E.HONS.(UTM)(ELECTRICALMOHD ZAIN ELECTRONICS, 2007) TEOH JOEH MENG M.E.HONS.(UNI. OF NOTTINGHAM)(ELECTRICAL & ELECTRONIC, 2016)

Note: Continuation would be published in July 2020.

For the list of approved “ADMISSION TO THE GRADE OF STUDENT”, please refer to IEM web portal at http://www. myiem.org.my.

Pengumuman yang ke-139 SENARAI PENDERMA KEPADA WISMA DANA BANGUNAN IEM Institusi mengucapkan terima kasih kepada semua yang telah memberikan sumbangan kepada tabung Bangunan Wisma IEM. Ahli-ahli IEM dan pembaca yang ingin memberikan sumbangan boleh berbuat demikian dengan memuat turun borang di laman web IEM http://www.iem. org.my atau menghubungi secretariat di +603-7968 4001 / 5518 untuk maklumat lanjut. Senarai penyumbang untuk bulan Mac & April 2020 adalah seperti jadual di bawah: NO.

NO. AHLI

1

25259

NAMA MR. NG SENG YEW

2

04351

IR. NGION ENG KENG

3

20955

MR. CHOK CHING HUAT

4

15850

MR. JAWHARDEEN BIN HAJI ABDUL KADER

5

20014

IR. POH HEON KHOON

6

43207

MR. CHIN WUI KEAT

7

07691

MR. IDRIS BIN MOHAMED @ MAMAT

8

05441

IR. LEE CHAN GUAN IR. LEONG MUN YEAN

9

12626

10

87421

MR. KWA TECK CHUAN

11

21581

MR. LAW YAN CHEE

12

22936

IR. LIAW WEI LOONG

13

29136

DR VIGNA KUMARAN A/L RAMACHANDARAMURTHY

14

28551

MR. KAMAL ASHRAFF BIN MOHAMAD ASHRAY

15

21440

MR. MOHD BAHARUDDIN BIN TAJUDIN

16

22916

MR. CHAN CHEE KIT

17

16083

MR. CHONG VUI KONG, PETER

18

36272

MR. ROSLIE BIN ABDUL AHMAN

19

05703

IR. GNANADHAS S/O MANUEL

20

44936

MS. STEFFI MIT ANAK ANGIE

21

84901

IR. MUHAMMAD KHUZAIFAH BIN HASSAN

22

43906

MR. CHE FISOL BIN ABDUL HAMID

23

25093

MR. WONG KIE HIEN

24

70414

MR. MOHD FAIRUZ BIN CHE AB. WAHAB

25

97493

MR. CHEONG JAN XI

26

12697

IR. AHMAD NORNADZMI BIN DZULKARNAIN

THE INSTITUTION OF ENGINEERS, MALAYSIA

JURUTERA

43

IEM Magazine_Chiller AD (210cm x 285cm).pdf

C

M

Y

CM

MY

CY

CMY

K

1

10/05/2019

9:55 AM

Subscribe to IEM’s Publications Now! Yes! I would like to be a subscriber of The Institution of Engineers, Malaysia’s publications Name: _________________________________________________________________________________________________________ Mailing Address: _________________________________________________________________________________________________ ______________________________________________________________________________ Country: ________________________ Company/Institution: ______________________________________________________________________________________________ Title: __________________________________________________________________________________________________________ Telephone No: _________________________ Fax: _________________________ Email: _____________________________________ New Subscriber

Renewal

Please commence my subscription from: _________________________(month/year)

Signature: _______________________________

To start your subscription of IEM’s publications, complete this form and mail it back to the address below. For faster processing, fax it to: +603 7493 1047. Thank you.

What is your primary job title?

What are the main activities of your organisation? (Tick all that apply)

Constructions of:

Corporate Management (including chairman, president, proprietor, partner, director, vice president, general manager, division manager, import/export manager, other corporate title) Management (including project/contract/equipment/service/transport district manager, clerk of works, other technical or operating manager) Engineering/Design (including chief engineer, chief designer, civil/ highway/mechanical/planning engineer, other engineering/design title)

Manufacturer of:

Roads/bridges

Construction equipment

Dams/reservoirs/irrigation Cement

Harbours/offshore structures

Other construction materials

Foundations/tunnels Distribution

Pipelines/refineries

Structures/steel work

Construction equipment Construction materials

Building (commercial, industrial)

Hire/rental of construction equipment

Buying/Purchasing (including chief buyer, buyer, purchasing officer, other buying/purchasing title)

Titles allied to the field (architect, consultant, surveyor, research and development professor, lecturer, supervisor, superintendent, inspector or other allied title)

Housing Design

Others (please specify) ____________________________

Construction management

Deep mining Aggregate production

Others (Please specify) _________________________________________

What type of organisation do you work in? (Tick one box only)

Contractor

Sub-contractor specialist

Design and build contractor

Consulting engineering/architectural/quantity surveying practice

Mining/quarrying/aggregate production company

Petroleum producer

International/national authorities

National/regional/local government

Public utilities (electricity, gas, water, deck and harbour, other)

Manufacturer Distributor/importer/agent

Construction department of large industrial/Commercial concern

Association/education establishment/research

Construction equipment hire/rental company

Project/construction management consultancy

Others (please specify) _______________________________

Earth-moving/open cast mining

Rate (Please tick)

RM360.00 - 12 issues of JURUTERA

RM84.00 - 2 issues IEM Journal (Half-yearly)

Terms and Conditions: 1) 2) 3) 4) 5) 6)

The subscription is to be prepaid.

Please make cheque payable to Dimension Publishing Sdn. Bhd. Subscriptions are not refundable.

Magazine/s will be sent to the mailing address given.

Students are entitled for a 20% discount from the above subscription rate.

Students must submit a photocopy of the student identification card together with the payment.

7) The above rate is inclusive of delivery charges and applicable in Malaysia only.

8) Additional delivery charges will apply to overseas subscribers.

For subscription enquiries, please contact +603-7493 1049 or email to info@dimensionpublishing.com.

DIMENSION PUBLISHING SDN. BHD. (449732-T) Level 18-01-02, PJX-HM Shah Tower, No. 16A, Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel +603 7493 1049 Fax +603 7493 1047 Website www.dimensionpublishing.com

Updated May 2018