• Faces: 3/16” Thick clear acrylic faces w/ 3M 3630-337 Process Blue vinyl applied to second surface.
• Trim: 1” Process blue trim cap.
• Returns: 3” Deep aluminum returns ptd. to process blue.
• Illumination: Hanley PF-2080W white 7000K Led Illumination.
• Power Supplies: Remote Hanley Superior series 60 Watt power supplies
• Mounting: Secured with #14, 3/8" dia. x 6" galvanized lag screws on existing surface.
ILLUMINATED CHANNEL LETTERS ON BACKER PANEL
• Faces: 3/16" clear polycarbonate faces with vinyl graphics applied to second surface.
• Trim Cap: 1" trim cap on perimeter of all channel letters, finished to match PMS 295 C.
• Returns: 5" deep x 0.040" thick aluminum returns, finished to match PMS 295 C.
• Backer Panel: 2” Thick aluminum backer panel painted to match 3M 3630-115 Light Lemon Yellow.
• Illumination: Hanley PF-2080, 7000K white internal LED illumination.
• Power Supplies: Remote Hanley 60-watt Superior Series LED power supplies.
• Mounting: Letters mounted to backer and backer Mounted to existing exterior wall surface using #14 x 4" hex washer head lag screws.
• Wall may require repairs upon signage installation.
- ILLUMINATED CHANNEL SIGNS, AWNING DESIGN AND FACE REPLACEMENT - FABRICATION DRAWINGS
ILLUMINATED CHANNEL LETTERS ON ALUMINUM RACEWAY
• Faces: 3/16" red #2793 pigmented Plexiglas.
• Trim: 1" red trim cap.
• Returns: 5" deep pre-painted gloss black aluminum.
• Illumination: Hanley PF-2080R red LED illumination.
• Power Supplies: Remote Hanley superior series 60 Watts LED power supplies.
• Mounting: Mounted on Aluminum raceway ptd. to PANTONE 4685 C w/ #14 1" long self TEK screw as shown, Raceway mounted to brick surface w/ 3/8" HWH, #14x3" long masonry/concrete screw
ILLUMINATED TIMS MAPLE LEAF SIGN
• Face: 3/16" white acrylic (#7328) with 3M red vinyl (#3630-33) applied to the front.
• Trim: 1" red trim cap.
• Returns: 5" deep gloss black aluminum.
• Illumination: Hanley PF-2080W 7000K white LEDs.
• Power Supplies: Remote Hanley superior series 60 Watts LED power supplies.
• Mounting: Secured with 3" long concrete/masonry screws, such as #14 x 3" flat head, steel, self-tapping, or suitable alternative for masonry. Install as shown.
2"x2"x1/8" tie aluminum tube LEDs for internal acrylic band
1/8” th aluminum return painted to Midnight green HEX #004953
1/4" thick white acrylic sheet on three side of frame glued to internal side of angles
eyebolt, 3/4 x 6 in with shoulder
1/8” th aluminum return painted to Midnight green HEX #004953
2"x2"x1/8" tie aluminum tube section
removable 1/8” th aluminum sheet with opaque vinyl graphics
1/2" th clear acrylic sheet with white vinyl
1/2" th clear acrylic sheet with translucent vinyl graphics
hanley pf-2080 led lights for push thru letters welded to internal frame 2"x2"x1/8" aluminum angle frame hanley pf-2080 led lights for internal 8" wide acrylic band
2"x2"x1/8" tie aluminum tube section
Horizontal 2"x1"x1/8" aluminum rectangular section stiffeners to support aluminum sheet vertical 1"x1"x1/8" aluminum rectangular section stiffeners
1/2" th clear acrylic sheet with white vinyl
• 1/8" aluminum sheet with opaque vinyl graphics
• 1/2" th clear acrylic sheet with translucent vinyl graphics
• hanley pf-2080 led lights for push thru letters
• front/back covers with acrylic push thru letters screwed to internal angle frame w/ #10 flat hed screws
• 2"x2"x1/8" aluminum angle frames
• hanley pf-2080 led lights for center 8" wide & 1/4” thick acrylic
• 2"x2"x1/8" tie aluminum tube sections
• 1/8” th aluminum return painted to Midnight green HEX #004953 w/ 8” wide illuminated white acrylic in centre on three sides except top
1/8” th aluminum return painted to Midnight green HEX #004953
1/4" thick white acrylic sheet on three side of frame glued to internal side of angles
1/8” th aluminum return painted to Midnight green HEX #004953
2"x2"x1/8" tie aluminum tube section
1/4" thick white acrylic sheet on three side of frame glued to internal side of angles hanley pf-2080 led lights for push thru letters hanley pf-2080 led lights for internal 8" wide acrylic band
1/2" th clear acrylic sheet with translucent vinyl graphics
DOUBLE FACE ILLUMINATED PUSH
BOX SIGN
• 1/8" aluminum sheet with opaque vinyl graphics
• 1/2" th clear acrylic sheet with translucent vinyl graphics
• hanley pf-2080 led lights for push thru letters
• front/back covers with acrylic push thru letters screwed to internal angle frame w/ #10 flat hed screws
• 2"x2"x1/8" aluminum angle frames
• hanley pf-2080 led lights for center 8" wide & 1/4” thick acrylic
• 2"x2"x1/8" tie aluminum tube sections
• 1/8” th aluminum return painted to Midnight green HEX #004953 w/ 8” wide illuminated white acrylic in centre on three sides except top
return
1/8” TH ALUMINUM RETURN PAINTED TO MIDNIGHT GREEN HEX #004953
2"X2"X1/8" TIE ALUMINUM ANGLE WELDE TO RETURN #10X 3/4" LONG FLAT HEAD TEK SCREWS
HORIZONTAL 2"X1"X1/8" ALUMINUM
RECTANGULAR SECTION STIFFENERS WELDED TO ALUMINUM SHEET
2"X2"X1/8" ALUMINUM ANGLE FRAME
EYEBOLT, 3/4 X 6 IN WITH SHOULDER
#10 X 1" FLAT HEAD SELF TAPPING SCREWS
MINIMUM 4 SCREWS ON EACH SIDE
MINIMUM 16 SCREWS PER FACE
32 SCREWS
REMOVABLE 1/8” TH ALUMINUM SHEET WITH OPAQUE VINYL GRAPHICS
3 SEPARATE DIMMERS FOR FRONT, BACK AND EDGE LIGHTING POWER SUPPLY CONNECTED TO EXISTING 15 FEET
return
VERTICAL 1"X1"X1/8" ALUMINUM RECTANGULAR SECTION STIFFENERS WELDED TO ALUMINUM SHEET
REMOVABLE 1/8” TH ALUMINUM SHEET WITH OPAQUE VINYL GRAPHICS
1"X1"X1/8" TUBE TENSION MEMBER
HANLEY PF-2080 LED LIGHTS FOR PUSH THRU LETTERS WELDED TO INTERNAL FRAME
