Elegance. Performance. Simplicity.
One House. One Language of Light.
Brackenheath iSpot Outdoor Lighting range has been designed to create a consistent, modern lighting style across the whole property.
From the entrance and driveway to the garage, patio and garden boundary, each product sits within one unified family. Bulkheads, floodlights, lanterns, up/down lights and bollards all share a clean design, helping installers and customers achieve a more coordinated finish without mixing unrelated styles.
Built for modern residential spaces, the range combines stylish design with practical installation features, including unified backplates, fast-fix fittings, PIR and photocell options, series linking and durable IP65 weatherproof protection across key products.
Slim Bulkheads Page 4-7
Round Bulkheads Page 8-11
Floodlights Page 18-21
Page 22-25
Page 28-31
Swivel
Twin Swivel Floodlights
Cube Wall Lanterns
Wall Lanterns Page 32-35
Frameless Bulkheads
UNIFIED BACKPLATE
Fast Fix – One Backplate, Four Lights
Fit-and-clip installation using the same fixing holes as the Lantern, Up/Down Light and Swivel Floodlight backplates.
CREEP-ZONE COVERAGE
180° Detection up to 10m
No dead spots at the doorstep — the angle every other bulkhead misses, with backward detection and dual exit-on zones.
4 PRODUCTS IN 1 BULKHEAD
Sensor Modes. Zero Blind Spots.
PIR
Off until lux threshold and then 100% on motion.
DIM OFF • Time 5s–10 min
PIR & Dim Standby
20% standby light at lux threshold; increasing to 100% on motion.
PIR & Photocell + 2-Step Dimming
DIM 20% • Time 5s–10 min
Photocell
100% on at lux threshold; stays on through dark Hours.
DIM OFF or 20% • Time “D”
Manual Override
Direct on/off — bypasses lux and motion sensing.
Switch-controlled
Stylish, Unique
Designed for Modern Residential Spaces
Slim,
Frameless Slim Bulkhead
Frameless slim LED bulkhead for outdoor use. Ideal for entrances and pathways. Edge-lit and front illumination for uniform output. Polycarbonate body for corrosion resistance.
Manual On/Off control
Unique frameless opal diffuser
Easy-install, fast-fix backplate
Durable, weatherproof construction
Polycarbonate body
In The Range
Four Products In One Bulkhead PIR
Dim-back + PIR
Photocell • Manual
Frameless Slim Bulkhead with PIR & Photocell
Frameless slim LED bulkhead for outdoor use. Ideal for entrances and pathways. Edge-lit and front illumination for uniform output. Polycarbonate body for corrosion resistance.
4-in-1 set-up options – PIR • Dim-back + PIR • Photocell • Manual
180° motion and day/night sensing
Up to 10m anti-creep detection
Unique frameless opal diffuser
Easy-install, fast-fix backplate
In The Range
Slim, Stylish, Unique
Designed for Modern Residential Spaces
Frameless Round Bulkhead
Frameless round LED bulkhead for outdoor use. Ideal for entrances and pathways. Edge-lit and front illumination for uniform output. Polycarbonate body for corrosion resistance.
Manual On/Off control
Unique frameless opal diffuser
Easy-install, fast-fix backplate
Durable, weatherproof construction
Polycarbonate body 8.5W
In The Range
Products In One Bulkhead
Frameless Round Bulkhead with PIR & Photocell
Frameless round LED bulkhead for outdoor use. Ideal for entrances and pathways. Edge-lit and front illumination for uniform output. Polycarbonate body for corrosion resistance.
4-in-1 set-up options – PIR • Dim-back + PIR • Photocell • Manual
180° motion and day/night sensing
Up to 10m anti-creep detection
Unique frameless opal diffuser
Easy-install, fast-fix backplate
In The Range
Frameless Floodlights
REWIREABLE & PLUG-IN PIR OPTION
True Plug-In IP65 PIR Option
Plug-in PIR module acts as the master control, allowing non-PIR floodlights to be switched from one sensor.
TWIN CABLE GLANDS
Series-Linkable Floodlights
Supplied with installer-friendly cover and captive terminal screws, removing the need for weatherproof junction boxes and extra connector.
PRE-FITTING BRACKET DESIGN
Fast Fix – Hook Bracket
Easy-install hook bracket allows the floodlight to be pre-fitted before final installation.
SERIES-LINKABLE FLOODLIGHTS
One Sensor. Multiple Lights.
Connect and control additional iSpot G3 frameless floodlights up to a maximum total load of 300W.
Frameless Floodlight with True Plug-In PIR
Ultra-thin LED floodlight designed for outdoor use, ideal for driveways and security lighting. Available with a true plug-in IP65 PIR option, offering adjustable time, lux level, detection range and manual override. Series-linkable when used with iSpot G3 frameless floodlights.
Rewireable with easy-access push-fit terminals
Frameless low-profile design
Series linkable with compatible iSpot G3 fittings
Durable, weatherproof construction
Easy-install hook bracket allows pre-fitting prior to installation
In The Range
Swivel Floodlights
UNIFIED BACKPLATE
Fast Fix – One Backplate
Fit-and-clip installation using the same fixing holes as the Frameless Bulkheads, Lantern and Up/Down Light backplates.
CLIP-ON FITTINGS
Hands-free Installation
Specially designed backplate clips into place and stays put while wiring connections are made.
UNIFIED TWIST PIR & PHOTOCELL
Aim the Sensor Where you Need it
Unified PIR and Photocell across lanterns and swivel floodlights.
Sensor twists 90° left/right, with up to 10m detection with creep-zone coverage.
The lux adjustment dial can be set from 0~20 lux (moon symbol) to 1000 lux (sun symbol).
FLEXIBLE SWIVEL FLOODLIGHTS
Wall or Eave Mount
Swivel floodlights can be mounted on either a wall or eave to direct light exactly where it is needed.
Clean, Contemporary Lighting
Designed for Modern Residential Spaces
Single Swivel Floodlight
Compact LED floodlight for outdoor use, ideal for driveways and security lighting. Series linkable when used with iSpot swivel floodlights. Suitable for wall or eaves mounting.
Manual On/Off control
Polycarbonate body with aluminium head
Series link up to 8 fittings, max. 150W LED load
Easy-install, fast-fix backplate
Durable, weatherproof construction
In The Range
Mount | BR3550
Three
Products In One Floodlight PIR • Photocell • Manual
Single Swivel Floodlight with PIR
& Photocell
Compact LED floodlight for outdoor use, ideal for driveways and security lighting. Twist-and-swivel dual PIR and photocell sensor for wide, adjustable detection. Series linkable when used with iSpot swivel floodlights. Suitable for wall or eaves mounting.
3-in-1 set-up options – PIR • Photocell • Manual
180° motion and day/night sensing
Up to 10m anti-creep detection
Series link up to 8 fittings, max. 150W LED load
Easy-install, fast-fix backplate
8.5W 1050 lumens 4000K
30,000 hours IK05 IP65
In The Range
Wall & Eave Mount | BR3552
Clean, Contemporary Lighting
Designed for Modern Residential Spaces
Twin Swivel Floodlight
Compact LED floodlight for outdoor use, ideal for driveways and security lighting. Series linkable when used with iSpot swivel floodlights. Suitable for wall or eaves mounting.
Manual On/Off control
Polycarbonate body with aluminium head
Series link up to 8 fittings, max. 150W LED load
Easy-install, fast-fix backplate
Durable, weatherproof construction
In The Range
Twin Swivel Floodlight with PIR &
Photocell
Compact LED floodlight for outdoor use, ideal for driveways and security lighting. Twist-and-swivel dual PIR and photocell sensor for wide, adjustable detection. Series linkable when used with iSpot swivel floodlights. Suitable for wall or eaves mounting.
3-in-1 set-up options – PIR • Photocell • Manual
180° motion and day/night sensing
Up to 10m anti-creep detection
Series link up to 8 fittings, max. 150W LED load
Easy-install, fast-fix backplate
hours IK05 IP65
In The Range
Lanterns
UNIFIED BACKPLATE
Fast Fix – One Backplate
Fit-and-clip installation using the same fixing holes as the Frameless Bulkhead, Up/Down Light and Swivel Floodlight backplates.
CLIP-ON FITTINGS
Hands-free Installation
Specially designed backplate clips into place and stays put while wiring connections are made.
UNIFIED TWIST PIR & PHOTOCELL
Aim the Sensor Where you Need it
Unified PIR and Photocell across lanterns and swivel floodlights.
Sensor twists 90° left/right, with up to 10m detection with creep-zone coverage.
The lux adjustment dial can be set from 0~20 lux (moon symbol) to 1000 lux (sun symbol).
LANTERNS WITH ONE TWIST. LAMP CHANGED. No Tools. No Disassembly. Just a Twist of the Bayonet Lock.
STEP 1
Remove decorative frame
STEP 2
Turn to release
STEP 3
Access the lamp holder
Modern Take on Traditional Outdoor Lanterns
Designed for Modern Residential Spaces
Decorative Cube Lantern
Cube lantern for outdoor use. Ideal for porches and entrances. Polycarbonate construction for durability. Non-sensor Lanterns can be controlled in series when linked to PIR Photocell Lanterns.
Requires G9 lamp (max. 9W)
Twist-and-lock diffuser
Unified backplate for quick installation
Durable, weatherproof construction
Series link up to 8 fittings, max. 150W LED load
In The Range
Decorative Cube Lantern with PIR &
Photocell
Cube lantern for outdoor use. Ideal for porches and entrances. Polycarbonate construction for durability. Non-sensor Lanterns can be controlled in series when linked to PIR Photocell Lanterns.
3-in-1 set-up options – PIR • Photocell • Manual
180° motion and day/night sensing
Up to 10m anti-creep detection
Requires G9 lamp (max. 9W)
Series link up to 8 fittings, max. 150W LED load
In The Range
Modern Take on Traditional Outdoor Lanterns
Designed for Modern Residential Spaces
Decorative Lantern
Lantern for outdoor use. Ideal for porches and entrances. Polycarbonate construction for durability. Non-sensor Lanterns can be controlled in series when linked to PIR Photocell Lanterns.
E14 candle lamp recommended (max. 9W)
Twist-and-lock diffuser
Unified backplate for quick installation
Durable, weatherproof construction
Series link up to 8 fittings, max. 150W LED load
In The Range
Decorative Lantern with
PIR & Photocell
Lantern for outdoor use. Ideal for porches and entrances. Polycarbonate construction for durability. Non-sensor Lanterns can be controlled in series when linked to PIR Photocell Lanterns.
3-in-1 set-up options – PIR • Photocell • Manual
180° motion and day/night sensing
Up to 10m anti-creep detection
E14 candle lamp recommended (max. 9W)
Series link up to 8 fittings, max. 150W LED load
In The Range
Four Products In One
Up/Down Light
PIR • Dim-back + PIR • Photocell • Manual
Decorative Up/Down Light with
PIR & Photocell
LED up and down light for outdoor use. Ideal for feature and security lighting. Polycarbonate construction for durability. Non-sensor up and down lights can be controlled in series when linked to PIR up and down lights.
4-in-1 set-up options – PIR • Dim-back + PIR • Photocell • Manual
180° motion and day/night sensing
Up to 10m detection
Integrated LED up and down light effect
Series link up to 8 fittings, max 150W LED load
Compact, Modern and Made To Stand Out
Designed for Modern Residential Spaces
Decorative Up/Down Light
LED up and down light for outdoor use. Ideal for feature and security lighting. Polycarbonate construction for durability. Non-sensor up and down lights can be controlled in series when linked to PIR up and down lights.
Integrated LED up and down light effect
4000K cool white output
Unified backplate for quick installation
Durable, weatherproof construction
Series link up to 8 fittings, max 150W LED load
Build Your Own Bollards
DECORATIVE SURROUND COVER
Tamper-resistant Lamp Access
Cover secured with tamper-resistant screws.
MIX-AND-MATCH LANTERNS
Interchangeable Cube Heads
Mix-and-match cube and large-cube heads on the same post.
QUICK INSTALL
Pre-flexed Lead and Connector
Bollard head, supplied with a pre-flexed lead and connector, retrofits to any iSpot bollard head and post.
SERIES LINKABLE UP TO 8 BOLLARDS
Plug-in PIR module acts as the master control, allowing non-PIR bollards to be switched from one sensor.
One Sensor. Multiple Lights. MASTER PIR CONTROL
4-in-1 set-up options – PIR • Dim-back + PIR • Photocell • Manual
LINK UP TO BOLLARDS MAX. 8
PLUG-AND-PLAY PIR & PHOTOCELL SENSOR MODULE Add Security Lighting Without Rewiring The lux adjustment dial can be set from 0~20 lux (moon symbol) to 1000 lux (sun symbol).
Bollard Posts
Modular universal bollard is designed for residential outdoor lighting. Aluminium body with a black powder-coated finish. Mix-and-match cube and lantern lamp heads on the same post. Add a master plug-in sensor with Dim-to-PIR motion, PIR motion, photocell and manual override to control multiple bollards in series.
Two post height options 655mm and 855mm
Mix and match cube and lantern heads (BR3573 & BR3574)
Add a master plug-in sensor to control multiple bollards in series
Durable, weatherproof construction
Series link up to 8 fittings, max. 150W LED load
In The Range
Smarter Way To Light
Outdoor Living Spaces
Compact Bollard Cube for Modern Residential Spaces
Bollard Cube Lamp Head
Modular universal bollard cube lantern designed for residential outdoor lighting. Pre-flexed with a waterproof connector to fit 655mm and 855mm bollard posts. Series link up to 8 fittings, max. 150W LED load. Add a master plug-in sensor with Dim-to-PIR motion, PIR motion, photocell and manual override to control multiple bollards in series.
Requires G9 lamp (max. 9W)
Lamp access is secured with tamper resistant screws
Supplied with a removable decorative surround cover
Durable, weatherproof construction
Series link up to 8 fittings, max. 150W LED load
In The Range
Smarter Way To Light
Outdoor Living Spaces
Bigger Bollard Cube. Bigger Presence.
Bollard Lantern Lamp Head
Modular universal bollard cube lantern designed for residential outdoor lighting. Pre-flexed with a waterproof connector to fit 655mm and 855mm bollard posts. Series link up to 8 fittings, max. 150W LED load. Add a master plug-in sensor with Dim-to-PIR motion, PIR motion, photocell and manual override to control multiple bollards in series.
E14 candle lamp recommended (max. 9W)
Lamp access is secured with tamper resistant screws
Supplied with a removable decorative surround cover
Durable, weatherproof construction
Series link up to 8 fittings, max. 150W LED load
In The Range
PIR & Photocell Module
Plug-in Motion Sensor
Modular universal bollard sensor designed for residential outdoor lighting. Add to any iSpot bollard lantern and post and use as the master control with dim-to-PIR motion, PIR motion, photocell and manual override settings to control multiple bollards in series.
4-in-1 set-up options – PIR • Dim-back + PIR • Photocell • Manual
180° detection up to 8m
Add security control without rewiring
Durable, weatherproof construction
Series link up to 8 fittings, max. 150W LED load
Bollard Root Mounting Kit for Soft-ground Installation
Root mounting iSpot bollard kit designed for installation into soft ground, including lawns, borders and planted areas. Supplied with a metal mounting plate and four ground J-bolts. The bollard post is secured using two grub screws on both sides, four mounting screws hidden with cover for a fully concealed finish once installed.
Designed for soft ground and soil installations
No concrete base required
Supplied with a metal mounting plate and four J-bolts
Provides stable positioning and alignment after installation
Fixings are concealed once installed
Mounting Base - Aluminium Alloy Diecast
Fixings - 4 x J-bolts and Fixings Supplied Soft Ground Installation | BR3575
In The Range
