luceredesigns.com / info@luceredesigns.com
WHAT IS LUCERE?
Lucere is a collection of resinous designer panels with unparalleled clarity and real three dimensional depth.
Almost the entire Lucere range can be fabricated with standard wood working tools and easily installed with glass fittings, providing the perfect solution for applications where the weight and fragility of glass is problematic. Why choose simple, plain glass when Lucere designs are waiting to be discovered!
PERFECT FOR:
• PARTITIONS
• SCREENS
• DECORATIVE PANELING
EASILY FABRICATED WITH STANDARD WOOD WORKING TOOLS
MORE IMPACT RESISTANT THAN GLASS
HALF THE DENSITY OF GLASS
EASY TO MAINTAIN
HEAT-FORMABLE
GREAT WHEN EDGELIT OR BACKLIT
PANEL INFO SPECIFICATIONS
* PANEL SIZES
48" x 96", 48" x 120", 39" x 96"
* PANEL THICKNESS 1/4" , 3/8" , 7/16" , 1/2"
SURFACE FINISH Gloss, Matte or Gloss/Matte
INDOOR / OUTDOOR Indoor Use Only
WET AREAS
THERMOFORMABLE
1 Yes
2 Yes
FLAME SPREAD ASTM E84 125
FABRICATION 3 Standard wood working tools
INSTALLATION
Most glass fittings can be used
REFINISHABLE Yes: Gloss or Matte
CARE INSTRUCTIONS:
In most instances, warm water, mild detergent, and a soft sponge, cloth or chamois will be enough to clean Lucere.
ENVIRONMENTAL INFORMATION:
Easily recycled. Contact your Lucere rep for details.
1 - Edges must be sealed 2 - For specific details, please contact your Lucere rep for details.
3 - Excluding Alchemy option * - Not all design available in all sizes
** - Not all designs available in all thicknesses
ADDITIONAL COMMENTS
:
1. Being handmade, slight imperfections in Lucere are deemed acceptable. These slight imperfections may include small bubbles in the interlayer or slight surface texture imperfections. Any imperfection that is not visible 36” away from the panel is deemed within commercial tolerance.
2. Lucere sheets may not be perfectly flat. Due to this, it is always suggested that the sheet be fully framed or mechanically fixed.
3. Variations in color and density may occur between samples and the order. If this detail is critical, a sample of current stock should be produced for final approval which will add up to 3 weeks to the ordering process.
4. Lucere can be used as a splashback but NOT behind a stove or cooktop.
We recommend a minimum distance of 12” from the stove or cooktop.
EXPANSION AND CONTRACTION CONSIDERATIONS:
Similar to other resin-based materials, Lucere Designer Panels undergo minor expansion and contraction with temperature changes. For installations within frames or fitted spaces, use the following calculation to determine the necessary allowances:
Formula:
Longest panel length (in inches) x temperature change (°F) x 0.00004 = Linear Expansion/Contraction (inches)
Example:
For a 48” x 120” panel exposed to a 25°F temperature fluctuation, the adjustment needed would be:
• 120 inches x 25°F x 0.00004 = 0.12 inches (roughly an ⅛” gap)
If installation occurs before HVAC systems are running, installers should take extra precautions. Consider allowances for:
• Hole sizes for standoffs and hardware,
• Frame channel depths,
• Fastener placement,
• Seam allowances where sheets meet.
luceredesigns.com / info@luceredesigns.com
luceredesigns.com / info@luceredesigns.com
luceredesigns.com / info@luceredesigns.com