St veranda gb eaxj

FRAME

ALUMINIUM FRAME Extruded aluminium alloy frame (Al 6060 T5).

Standard colours available: white (RAL 9010), brown (RAL 8017) & anodised silver. Other powder coated RAL colours are available upon request.

65

65

143

GVS

®

57

Blind extension (mm)

1 module

2 modules

upto 1750

4

6

1751 - 2750

6

10

2751 - 4000

8

12

4001 - 5000

10

16

FIXING BRACKETS

A level mounting (standard)

B embedded mounting

C lateral mounting with angle plate 60x60x100

D lateral mounting with angle plate 50x100x100

VERANDA System

ST-VER-GB

FV92

92

N° OF BRACKETS

60

161

CV140

E distancing bracket (height 50-200 upon request)

OVERALL DIMENSIONS

2

SINGLE MODULE (VER507) 32,5

W - 65

30

Mounting double module model VER507D

min. distance from ceiling

50

145

300

min

900 max

H

ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 0396846122 Fax +39 0396846140 info@resstende.com www.resstende.com

65

W - 148 W

9

gap between guide and fabric

40-200

38

final position of traction bar

Ø120 max

All dimensions in mm

New lifestyles, new blind systems

Resstende S.r.l., a leading Italian company in the production of roller blinds, presents the VERANDA System: a solid and elegant awning designed for verandas and other large horizontal or slanted glassed areas.

When installed outdoors, the system provides optimum sun protection and maximum reduction of the greenhouse effect. The Veranda blind has a specially designed traction bar to guarantee constant fabric tension in any position and is therefore ideale not only for horizontal/sloped applications but also vertical windows where the blind is required to open from the ground upwards. The blinds may be installed side by side to form a continuous facade, the double module is operated by a single motor.

EXPLODED VIEW OF VERANDA AWNING

PRODUCT DESCRIPTION Veranda System (model VER507 -VER507D): Motorised roller blind principally for outdoor installations with a specially designed system to guarantee constant fabric tension in any position. The fabric is kept taut by a large spring inside the traction bar attached to Ø 2.5 mm galvanised steel cables (PES HT) wound onto pulleys (PEHD) mounted on each end of the roller tube. Also available a double module blind (VER507D) operated by a single motor.

1

Tubolar motor : Ø 47 mm (230V/50Hz) with mains cable, adjustable limit switch, thermal cut-out to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.

2

10 8

The blind structure is made of heavy duty extruded aluminium profiles, consisting of:

11

9

7

Roller tube: Ø 78 mm galvanized steel tube, thickness 1.25 mm, with special groove into which the welded strip on the fabric is inserted.

6 3

4

Box: with removable cover, mod. CV140 (143 x 161 mm) with high resistance cast aluminium lateral cheeks.

13

Guide rails: mod. GVS (65x65 mm), with high resistance cast aluminium end covers and incorporated pulleys for the cable hidden inside the guide rails.

5

24

25

23

12

Traction bar: mod. FV92 with removable cover (80x55 mm) containing the pretensioning system. The traction bar is mounted on ball bearing sliding units.

TECHNICAL CHARACTERISTICS

17

Chamber of Commerce in Taranto

Fabric: The most suitable fabrics for the Veranda system are SOLTIS 86, SOLTIS 92, SOLTIS B92 and ESTORYL.

Max wind pressure = 110 N/m² (Beaufort scale 6) Wind resistance: Class 3

14 22

Optimum solar protection, and maximum reduction of the greenhouse effect, may be obtained by positioning the blind outdoors at approximately 40 cm from the window pane.

The use of a centralised control unit with sun and wind sensors is recommended for outdoor awnings.

The Veranda has a wide choice of fixing brackets for mounting on any surface.

“Solidarietà e Servizi” offices in Varese

1 BOX CV140 FIXED PART 2 BOX CV140 REMOVABLE PART 3 END CHEEKS CV140 4 ALUMINIUM BRACKET 5 OPPOSITE SIDE END CAP 6 Ø 78 CABLE PULLEY 7 Ø 78 MOTOR BRACKET 8 TUBOLAR MOTOR 30 Nm 9 SQUARE PIN FOR MOTOR 10 MOTOR ADAPTER Ø78 11 MOTOR FIXING BRACKET 12 FABRIC 13 STEEL ROLLER TUBE Ø78 14 MOUNTING BRACKETS TYPE A 15 GUIDE RAIL GVS 16 GUIDE RAIL CAP GVS 17 RIGID Ø 7 mm ROD 18 SLIDING UNIT FOR FV92 19 CABLE TERMINAL 20 SPRING 21 PVC TUBE FOR Ø40 SPRING 22 TRACTION BAR COVER FV92 23 TRACTION BAR FV92 24 CABLE BLOCK WITH SWIVEL 25 “S” HOOK 26 Ø 2.5 mm CABLE

19 18

20

26 21

16

15

Certificate: AK 60015107 Model: VER507

TECHNICAL DATA MODEL OPERATION NOMINAL COUPLE (Min)

VER507

MOTORISED 30 Nm

OPERATING SPEED MAX LIFTING WEIGHT

Galleria Mazzini in Genoa

VOLTAGE ABSORBED CURRENT CE MARKING Constant fabric tension even when mounted horizontally. The maximum surface area that may be covered is 18 m² per module.

USERS & MAINTENANCE MANUAL INSTALLATION SHEETS MAX DIMENSIONS PER MODULE

VER507D

35-40 Nm

11 cm/s max 75 Kg

90 Kg

230 V / 50 Hz 1.1 A CEI 60335-2-97 UNI EN 13561 MT-003 SP-001 Width 450 cm, Height 500 cm max surface area 18 m2

Resstende S.r.l., a leading Italian company in the production of roller blinds, presents the VERANDA System: a solid and elegant awning designed for verandas and other large horizontal or slanted glassed areas.

When installed outdoors, the system provides optimum sun protection and maximum reduction of the greenhouse effect. The Veranda blind has a specially designed traction bar to guarantee constant fabric tension in any position and is therefore ideale not only for horizontal/sloped applications but also vertical windows where the blind is required to open from the ground upwards. The blinds may be installed side by side to form a continuous facade, the double module is operated by a single motor.

EXPLODED VIEW OF VERANDA AWNING

PRODUCT DESCRIPTION Veranda System (model VER507 -VER507D): Motorised roller blind principally for outdoor installations with a specially designed system to guarantee constant fabric tension in any position. The fabric is kept taut by a large spring inside the traction bar attached to Ø 2.5 mm galvanised steel cables (PES HT) wound onto pulleys (PEHD) mounted on each end of the roller tube. Also available a double module blind (VER507D) operated by a single motor.

1

Tubolar motor : Ø 47 mm (230V/50Hz) with mains cable, adjustable limit switch, thermal cut-out to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.

2

10 8

The blind structure is made of heavy duty extruded aluminium profiles, consisting of:

11

9

7

Roller tube: Ø 78 mm galvanized steel tube, thickness 1.25 mm, with special groove into which the welded strip on the fabric is inserted.

6 3

4

Box: with removable cover, mod. CV140 (143 x 161 mm) with high resistance cast aluminium lateral cheeks.

13

Guide rails: mod. GVS (65x65 mm), with high resistance cast aluminium end covers and incorporated pulleys for the cable hidden inside the guide rails.

5

24

25

23

12

Traction bar: mod. FV92 with removable cover (80x55 mm) containing the pretensioning system. The traction bar is mounted on ball bearing sliding units.

TECHNICAL CHARACTERISTICS

17

Chamber of Commerce in Taranto

Fabric: The most suitable fabrics for the Veranda system are SOLTIS 86, SOLTIS 92, SOLTIS B92 and ESTORYL.

Max wind pressure = 110 N/m² (Beaufort scale 6) Wind resistance: Class 3

14 22

Optimum solar protection, and maximum reduction of the greenhouse effect, may be obtained by positioning the blind outdoors at approximately 40 cm from the window pane.

The use of a centralised control unit with sun and wind sensors is recommended for outdoor awnings.

The Veranda has a wide choice of fixing brackets for mounting on any surface.

“Solidarietà e Servizi” offices in Varese

1 BOX CV140 FIXED PART 2 BOX CV140 REMOVABLE PART 3 END CHEEKS CV140 4 ALUMINIUM BRACKET 5 OPPOSITE SIDE END CAP 6 Ø 78 CABLE PULLEY 7 Ø 78 MOTOR BRACKET 8 TUBOLAR MOTOR 30 Nm 9 SQUARE PIN FOR MOTOR 10 MOTOR ADAPTER Ø78 11 MOTOR FIXING BRACKET 12 FABRIC 13 STEEL ROLLER TUBE Ø78 14 MOUNTING BRACKETS TYPE A 15 GUIDE RAIL GVS 16 GUIDE RAIL CAP GVS 17 RIGID Ø 7 mm ROD 18 SLIDING UNIT FOR FV92 19 CABLE TERMINAL 20 SPRING 21 PVC TUBE FOR Ø40 SPRING 22 TRACTION BAR COVER FV92 23 TRACTION BAR FV92 24 CABLE BLOCK WITH SWIVEL 25 “S” HOOK 26 Ø 2.5 mm CABLE

19 18

20

26 21

16

15

Certificate: AK 60015107 Model: VER507

TECHNICAL DATA MODEL OPERATION NOMINAL COUPLE (Min)

VER507

MOTORISED 30 Nm

OPERATING SPEED MAX LIFTING WEIGHT

Galleria Mazzini in Genoa

VOLTAGE ABSORBED CURRENT CE MARKING Constant fabric tension even when mounted horizontally. The maximum surface area that may be covered is 18 m² per module.

USERS & MAINTENANCE MANUAL INSTALLATION SHEETS MAX DIMENSIONS PER MODULE

VER507D

35-40 Nm

11 cm/s max 75 Kg

90 Kg

230 V / 50 Hz 1.1 A CEI 60335-2-97 UNI EN 13561 MT-003 SP-001 Width 450 cm, Height 500 cm max surface area 18 m2

Resstende S.r.l., a leading Italian company in the production of roller blinds, presents the VERANDA System: a solid and elegant awning designed for verandas and other large horizontal or slanted glassed areas.

When installed outdoors, the system provides optimum sun protection and maximum reduction of the greenhouse effect. The Veranda blind has a specially designed traction bar to guarantee constant fabric tension in any position and is therefore ideale not only for horizontal/sloped applications but also vertical windows where the blind is required to open from the ground upwards. The blinds may be installed side by side to form a continuous facade, the double module is operated by a single motor.

EXPLODED VIEW OF VERANDA AWNING

PRODUCT DESCRIPTION Veranda System (model VER507 -VER507D): Motorised roller blind principally for outdoor installations with a specially designed system to guarantee constant fabric tension in any position. The fabric is kept taut by a large spring inside the traction bar attached to Ø 2.5 mm galvanised steel cables (PES HT) wound onto pulleys (PEHD) mounted on each end of the roller tube. Also available a double module blind (VER507D) operated by a single motor.

1

Tubolar motor : Ø 47 mm (230V/50Hz) with mains cable, adjustable limit switch, thermal cut-out to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.

2

10 8

The blind structure is made of heavy duty extruded aluminium profiles, consisting of:

11

9

7

Roller tube: Ø 78 mm galvanized steel tube, thickness 1.25 mm, with special groove into which the welded strip on the fabric is inserted.

6 3

4

Box: with removable cover, mod. CV140 (143 x 161 mm) with high resistance cast aluminium lateral cheeks.

13

Guide rails: mod. GVS (65x65 mm), with high resistance cast aluminium end covers and incorporated pulleys for the cable hidden inside the guide rails.

5

24

25

23

12

Traction bar: mod. FV92 with removable cover (80x55 mm) containing the pretensioning system. The traction bar is mounted on ball bearing sliding units.

TECHNICAL CHARACTERISTICS

17

Chamber of Commerce in Taranto

Fabric: The most suitable fabrics for the Veranda system are SOLTIS 86, SOLTIS 92, SOLTIS B92 and ESTORYL.

Max wind pressure = 110 N/m² (Beaufort scale 6) Wind resistance: Class 3

14 22

Optimum solar protection, and maximum reduction of the greenhouse effect, may be obtained by positioning the blind outdoors at approximately 40 cm from the window pane.

The use of a centralised control unit with sun and wind sensors is recommended for outdoor awnings.

The Veranda has a wide choice of fixing brackets for mounting on any surface.

“Solidarietà e Servizi” offices in Varese

1 BOX CV140 FIXED PART 2 BOX CV140 REMOVABLE PART 3 END CHEEKS CV140 4 ALUMINIUM BRACKET 5 OPPOSITE SIDE END CAP 6 Ø 78 CABLE PULLEY 7 Ø 78 MOTOR BRACKET 8 TUBOLAR MOTOR 30 Nm 9 SQUARE PIN FOR MOTOR 10 MOTOR ADAPTER Ø78 11 MOTOR FIXING BRACKET 12 FABRIC 13 STEEL ROLLER TUBE Ø78 14 MOUNTING BRACKETS TYPE A 15 GUIDE RAIL GVS 16 GUIDE RAIL CAP GVS 17 RIGID Ø 7 mm ROD 18 SLIDING UNIT FOR FV92 19 CABLE TERMINAL 20 SPRING 21 PVC TUBE FOR Ø40 SPRING 22 TRACTION BAR COVER FV92 23 TRACTION BAR FV92 24 CABLE BLOCK WITH SWIVEL 25 “S” HOOK 26 Ø 2.5 mm CABLE

19 18

20

26 21

16

15

Certificate: AK 60015107 Model: VER507

TECHNICAL DATA MODEL OPERATION NOMINAL COUPLE (Min)

VER507

MOTORISED 30 Nm

OPERATING SPEED MAX LIFTING WEIGHT

Galleria Mazzini in Genoa

VOLTAGE ABSORBED CURRENT CE MARKING Constant fabric tension even when mounted horizontally. The maximum surface area that may be covered is 18 m² per module.

USERS & MAINTENANCE MANUAL INSTALLATION SHEETS MAX DIMENSIONS PER MODULE

VER507D

35-40 Nm

11 cm/s max 75 Kg

90 Kg

230 V / 50 Hz 1.1 A CEI 60335-2-97 UNI EN 13561 MT-003 SP-001 Width 450 cm, Height 500 cm max surface area 18 m2

FRAME

ALUMINIUM FRAME Extruded aluminium alloy frame (Al 6060 T5).

Standard colours available: white (RAL 9010), brown (RAL 8017) & anodised silver. Other powder coated RAL colours are available upon request.

65

65

143

GVS

®

57

Blind extension (mm)

1 module

2 modules

upto 1750

4

6

1751 - 2750

6

10

2751 - 4000

8

12

4001 - 5000

10

16

FIXING BRACKETS

A level mounting (standard)

B embedded mounting

C lateral mounting with angle plate 60x60x100

D lateral mounting with angle plate 50x100x100

VERANDA System

ST-VER-GB

FV92

92

N° OF BRACKETS

60

161

CV140

E distancing bracket (height 50-200 upon request)

OVERALL DIMENSIONS

2

SINGLE MODULE (VER507) 32,5

W - 65

30

Mounting double module model VER507D

min. distance from ceiling

50

145

300

min

900 max

H

ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 0396846122 Fax +39 0396846140 info@resstende.com www.resstende.com

65

W - 148 W

9

gap between guide and fabric

40-200

38

final position of traction bar

Ø120 max

All dimensions in mm

New lifestyles, new blind systems

FRAME

ALUMINIUM FRAME Frame is in extruded aluminium alloy Al 6060 T5. Standard colours available: white RAL9010, anodised silver, black & bronze. Powder coated RAL colours are available upon request.

28

12 80

23

42

42

®

FG42

G80

104,5 88,50

83

CT90

C90

103

116,5

116,5

CT76

99

99

88

76

CT105

Guided System

C105

143

161

CV140

CT76

C83

C103/CT103

CV140

C150

MAX WIDTH VERTICAL BLIND (cm)

BOX

220

330

500

500

500

MAX WIDTH HORIZONTAL BLIND (cm)

160

160

200

200

200

SP-104

SP-101

SP-105

SP-107

SP-106

INSTALLATION SHEET

OVERALL DIMENSIONS

ST-GR-GB

TYPE R

FG42R

MOUNTING OPTIONS FOR HORIZONTAL MODEL

VERTICAL MODEL 3

50

W 4,5

5

Reverse H

43,5

600 -900*

Standard

Oscurante Filtrante

* Reinforcement rod normally positioned every 600-900 mm

ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 0396846122 Fax +39 0396846140 Ph. +39 0396846122 Export info@resstende.com export@resstende.com www.resstende.com

80

3

Possibility of twin fabric upon request 23,5

New lifestyles, new blind systems