V O LU M E 16
Product Trade Catalogue
DDTECH.COM
1
AWARDS, MEMBERSHIPS, GLOBAL AFFILIATIONS & COMPLIANCES
D&D Technologies operates under a fully accredited and internationally recognized ISO 9001 Quality Assurance System, which governs the design and manufacture of all our proprietary products. NORTH AMERICA • U.S. Consumer Product Safety Commission (CPSC) • American Fence Association member • Pool and Hot Tub Alliance (PHTA) • International Code Council (ICC) • ASTM International (ASTM) • Co-founder/Sponsor, National Drowning Prevention Alliance (NDPA)
®
AUSTRALIA -NEW ZEALAND • Australian Made™ – an accreditation which ensures products that carry the logo are certified as ‘genuinely Australian’. • Master Locksmiths Association of Australasia Ltd • Standards Australia – Pool Fencing & Safety Gate Compliance • Swimming Pool & Spa Association (SPASA) • Laurie Lawrence’s “Kids Alive – Do The Five” Drowning Prevention • WaterSafe Auckland™ • McDonald’s® Restaurant Playlands (Australia) • Architectural Hardware Industry Association (AHIA) • Master Builders’ Association (MBA) EUROPE • Relevant products conform with AFNOR Standard NF P90-306 (relating to swimming pools; tested by LNE EO13331) WARRANTIES & LIABILITY D&D warrants that each of its products will be free of defects in material and workmanship (including mechanical parts) for a period of 10 years for residential application (private and sole occupancy usage, where usage excludes business use) or 5 years for commercial application (all other applications except for residential application) from date of purchase of the product with which this document is given (“Warranty”). If a structural defect appears, the original purchaser may return the item, freight prepaid, together with proof-of-purchase to D&D or its approved international agents. D&D or its agent will, at their discretion, repair or replace the defective item or part without charge to the purchaser. THIS WARRANTY SHALL NOT APPLY WHEN the product has been tampered with, when repairs or attempted repairs have been made by unauthorized persons, where the item has been subjected to misuse, abuse, accident or damage in transit, or where the installer has not followed the instructions set out during installation, operations or Maintenance Requirements. IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. No warranty is given other than that set out above. No other express or implied warranties (including statutory warranties) apply, other than warranties which may not be legally excluded. For full Warranty terms & conditions please refer to the individual products’ documentation. Note: D&D Technologies reserves the right to modify or update any products within this catalogue without notice. * Warranty terms on non-proprietary products offered by D&D may carry different conditions and requirements. Refer to those individual products for more details.
2
DDTECH.COM
AWARDS & WARRANTIES
New Products
GateStop® Gate Protection Device GS1S3
TruClose® MULTIADJUST for Wood TCHDMA2S3BT
KwikFit® POLYMER White KF3PWT/KF3SWT
A Passion For Safety, Security, Privacy and Durability D&D Technologies is the recognized leader in safety and high-performance gate hardware
ASSA ABLOY® SlimLine Vertical Closer DC622G--L/ DC622G--R
globally providing the broadest range of gate hardware for every application. D&D Technologies produces over 350 gate hardware products, and for over 35 years has been designing state-of-theart latches, locks, hinges, and closers engineered for the protection of people, property, pets,
MagnaLatch® Panic Bar ML3PB36R/TPLA/VPLA
and privacy. With trusted quality and reliable functionality, securing perimeters, pools, and properties across residential, commercial, and industrial applications is simple and effective.
MagnaLatch™ Side Pull SS ML3SPLBSS/ML3SPLPSS
DDTECH.COM
3
The world’s most trusted gate hardware
WHY YOU SHOULD INVEST IN SUPERIOR GATE HARDWARE
1
In general, gate latches and hinges make up just 1% of the total cost of a perimeter fence…but they make the other 99% function effectively.
2
Gates are the only moving part of the fence system. Gates depend on high-quality gate hardware to function properly in all conditions and climates.
3
Fences and gates can shift due to ground settling, environmental factors and general use and abuse. Latches, locks and hinges should be readily adjustable to ensure that gates work reliably and safely at all times.
4 4
Properly functioning gates that self-close, self-latch and provide ongoing adjustability (alignment) give consumers peace-of-mind. Gates and gate hardware should provide reliability, security or safety at all times.
GATE ESSENTIALS
ADJUSTABILITY
QUALITY
RELIABILITY
Hardware that’s easily installed and can be adjusted for vertical and horizontal alignment, or self-closing tension.
Industrial-strength engineering polymers and quality, stainless steel components offer rust-free reliability over a lifetime.
D&D gate hardware is designed to work in the harshest environments and conditions – freezing, heat, salt and sand.
WARRANTY
TESTING
SECURITY
D&D’s exceptional Product Warranty is your guarantee of peace-of-mind during and after your hardware installation. See website for details.
All our hardware is rigorously tested to meet international Codes/Standards for ISO-9001:2015 Quality Assurance Management System.
D&D’s award-winning, innovations provide the quality and strength needed to keep children, homes and businesses safe and secure.
DDTECH.COM
INDEX 12 .............. MAGNETIC LATCHES
About Us
MagnaLatch® ALERT* MagnaLatch® TOP PULL* MagnaLatch® VERTICAL PULL* MagnaLatch® PANIC BAR + ACCESS MagnaLatch® STAINLESS STEEL* MagnaLatch® SIDE PULL*
D&D’s range of quality gate latches, locks, hinges, closers and accessories are designed to protect and secure pools, homes, gardens and perimeter gates and fences.
22 .............. LOCKABLE LATCHES
LokkLatch® * LokkLatch® ROUND* LokkLatch® DELUXE* LokkLatch® PLUS* LokkLatch® MAGNETIC* T-Latch™ Gate Kits LATCH + HINGES
Trusted Quality
Established in the late 1980s, D&D gained international recognition with its ground-breaking MagnaLatch® magnetic child safety gate latch, winning several prestigious design awards. Since then D&D has expanded operations and continues to grow its product range, delivering innovative gate hardware solutions.
Improved Security
Our products improve perimeter security with a steadfast commitment to quality, we ensure that every aspect of our products meet rigorous standards. Our products not only provide superior security solutions but also prioritise durability and reliability.
Superior Standards
Production is subject to ISO-9001:2015 Quality Assurance Certification and auditing to ensure strict quality standards are maintained. Our products are rigorously tested to meet international codes/standards.
Quality priority
We are constantly refining the designs of our premium gate hardware. Most of our durable products are manufactured with “metal replacement” industrialstrength polymers and stainless steel components, and the heaviest gauge steel and highest quality Aluminium.
Dedicated to Innovation
We employ a dedicated team of Research and Development engineers and industrial designers to develop new and improved products year after year. The result is innovative, state-of-the-art gate hardware boasting numerous design awards and accolades from safety organisations.
Industry Consultancy
It’s our policy to work closely with fencing, locksmith and design industries, as well as liaising with safety groups and community organisations. It’s only by evaluating and acting on this co-operation and feedback that we’re able to deliver products that fully satisfy our customers’ needs, and gain a global reputation for producing top-quality products that last and last.
DDTECH.COM
32 .............. SELF-CLOSING HINGES
DecoMold™ TruClose® REGULAR TruClose® HEAVY DUTY TruClose® ROUND TruClose® MULTI-ADJUST ROUND TruClose® MULTI-ADJUST TruClose® HD MULTI-ADJUST
44 .............. KWIKFIT ECONOMICAL HINGES KwikFit™ Aluminium Hinges KwikFit™ POLYMER Hinges
50 .............. GATE ACCESSORIES GateHandle™ GateStop™ LokkBolt®* Q-Bolt™
56 ............ HYDRAULIC HINGE/CLOSERS
SureClose® READYFIT* SureClose® FLUSH/Centre MOUNT* SureClose® CONCEALFIT* SureClose® EASY* SLIMLine by ASSA ABLOY
70 .............. INDUSTRIAL HINGES ShutIt® BadAss™ Hinges
86 .............. GATE WHEELS
ShutIt® HardCore™ Wheels/Accessories
96 .............. WOOD GATE HARDWARE Wood Hardware Latches Wood Hardware Accessories Wood Hardware Hinges
102 ........... STAINLESS STEEL HARDWARE D&D Stainless Steel Latches D&D Stainless Steel Hinges
* Indicates product affected by Californian Govt “Prop 65” initiative, whereby products contain possible harmful substances listed under Prop 65 guidelines. Substances used in D&D’s products are not airborne, unbound particles of a respirable size, as Prop 65 outlines.
PRODUCT INDEX
5
A proud history of innovation
David Doyle
D&D Technologies begins in Sydney as D&D Aluminium Balustrading, founded by David Doyle and Neil Dunne. The name “D&D” is taken from their initials. The concept for the MagnaLatch® is born.
1985
1988
TruClose® Vizage™ hinge is launched with dual-end tension adjustment and decorative trim. Receives Good Design Mark. MagnaLatch® LOCKABLE Side Pull Series 2 debuts.
2009
6
Inspired by a TV science program on rare-earth magnets, David Doyle envisions a magnetic gate latch that won’t jam or rust and will always engage to close reliably.
SureClose® hydraulic hinge-closers and stainless-steel Vizage™ Side Pull launched. D&D introduces sustainable pouch packaging.
2011
D&D HISTORY
The very first MagnaLatch® ‘Side Pull’ is hand-built and installed on D&D Aluminium gates. D&D Technologies is formed to begin latch manufacturing.
1989
TruClose® S3 and LokkLatch® MAGNETIC launched with optional trim covers. MagnaLatch® S3 and SureClose® READYFIT released. READYFIT wins Architectural Record Product of the Year (USA).
2013
D&D pioneers polymer gate hardware with the MagnaLatch® ‘Top Pull’ and TruClose® S1 hinges, revolutionizing child safety. MagnaLatch® wins Silver at the Geneva International Invention Exhibition.
1990
MagnaLatch® Series 1 and TruClose® S1 both receive Australian Design Awards.
1992
MagnaLatch® Top Pull and TruClose® TCA1 are stocked in BBC and McEwan Hardware (later to become Bunnings). Products are shrink-wrapped to backing cards.
1995
SHUTIt ®
MagnaLatch® ALERT, the world’s first gate latch with built-in alarm, is released and wins a Good Design Award. KwikFit™ Aluminium Hinges introduced.
2015
DDTECH.COM
D&D acquires ShutIt® Gate Hardware, adding ‘BadAss’ and ‘Hard Core’ products. D&D wins the Australian National Export Award from the Master Builders Association Australia.
2016
Marine-grade Stainless Steel hinge and latch range launched for vinyl gates. KwikFit™ S3 polymer released. New D&D website launched at www.ddtech.com
2017
TruClose® S2 (Regular, Heavy Duty, MultiAdjust) launches. D&D Technologies (USA) Inc. is established in Los Angeles. D&D begins exporting globally.
1996
SureClose® READYFIT 180° launched for heavy-duty gates. LokkLatch® PLUS Privacy Gate Latch introduced. SureClose® CONCEALFIT, a concealed hydraulic hinge-closer, is released, meeting ADA/DDA standards.
2020
LokkLatch® S1 is introduced with an external push-button and built-in lock— redefining gravity gate latches.
1997
TruClose® ROUND redesigned for added strength. MagnaLatch® Side Pull body retooled to prevent counterfeits. D&D develops electronic pedestrian access controls. LokkLatch® DELUXE S3 Privacy Latch releasedto market.
2021
MagnaLatch® ‘Top Pull’ S2 launches with vertical and horizontal adjustability. Wins Kidsafe Product of the Year and earns safety endorsements.
1999
2000
In November 2022, ASSA ABLOY’s Pacific & North East Asia (PNEA) division announced the acquisition of D&D Technologies. The strategic move aimed to strengthen ASSA ABLOY’s position in the access solutions market by integrating D&D’s innovative product range and decades of market expertise.
2022
LokkLatch® PRO is released, featuring dual-side key access with 6-pin locks. David Doyle receives SPASA’s Ellis Champion Award posthumously.
TruClose® Multi-Adjust Heavy Duty S3 released and wins a Good Design Award. New 100% recyclable retail packaging developed to align with APCO 2025 sustainabilty goals.
2023
DDTECH.COM
LokkLatch® PRO earns Australian Design Mark. D&D becomes a founding partner of the National Drowning Prevention Alliance (NDPA).
2004
LokkLatch® S3 Privacy Gate Latch launched with fast-install bracket system. ShutIt® BADASS matteblack, bolt-on hinge range released.
2024
LokkLatch® DELUXE and general-purpose models launched. Patent filed for a self-locking latch. LokkLatch® PRO SL Self-Locking is released.
2006
Launches include: TruClose® Heavy Duty MultiAdjust™ for wood gates GateStop™ S3, reducing slam noise and preventing hinge/latch damage KwikFit™ Polymer in White (pivot and self-closing models) SlimLine Gate Closer from ASSA ABLOY for smooth, controlled closing MagnaLatch® Panic Bar + Access, combining emergency egress and secure access control for hightraffic zones.
2025
D&D HISTORY
7
Choosing the correct POOL AND CHILD SAFETY GATES Safety gates around pools, homes, childcare Centres, schools and wherever safety is critical, need hardware you can trust. D&D invented the MagnaLatch® over 30 years ago, and with millions installed worldwide, they continue to set the standard in compliant, child safety gates. MagnaLatch® ALERT Top Pull – Latch with electronic alarms MagnaLatch® Top Pull – Reliable, magnetic latching MagnaLatch® Side Pull Lockable – Small, magnetic latch Truclose® Regular – Self-closing hinges for regular gates TruClose® Heavy Duty – Self-closing hinges for heavier gates SureClose® SF models – Hydraulic hinge-closers
FRONT ENTRANCE OR GARDEN GATES Usually constructed of metal, wood, vinyl or Colourbond®, residential entrance gates are often high traffic, so need to be reliable and secure, with smooth and even closure. D&D gate latches and hinges are designed to last – no rusting, sagging, binding or staining. Easy to install, and adjustable to allow for fence or ground movement. MagnaLatch® Side Pull – Lockable or non-lockable latches LokkLatch® – Versatile range of lockable gate latches T-Latch – Toggle-style gravity latch; padlockable TruClose® – Self-closing hinges for heavy or high traffic gates KwikFit™ – Aluminium and Polymer self-closing hinges Accessories – GateStop™, Gate Handle™
PRIVACY AND SECURITY GATES Privacy gates for residential or commercial applications are designed to protect loved ones, pets and property. D&D’s range of gate latches, locks and self-closing hinges are guaranteed to offer reliability and added protection for perimeter and side gates. MagnaLatch® ALERT Vertical Pull – Latch with electronic alarms MagnaLatch® Vertical Pull – Reliable, magnetic latching LokkLatch® – Entire range of versatile, lockable latches SureClose® – Hydraulic hinge-closers SlimLine by ASSA ABLOY - Hydraulic, vertical gate closer TruClose® Regular – Self-closing hinges for regular gates TruClose® Heavy Duty – Self-closing hinges for heavier gates KwikFit™ – Aluminium and Polymer self-closing hinges Accessories – GateStop™, Gate Handle™
DOUBLE DRIVEWAY GATES Swinging, double driveway gates give a more traditional look by opening from the Centre. The gates can be automated with less swing and weight than single driveway gates, but require hinges on both sides, plus a latch and optional drop-bolts. D&D’s range of double driveway gate hardware is designed for this type of application. MagnaLatch® S3 Vertical Pull – Magnetic, reliable closure LokkLatch® – Range of lockable latches TruClose® – Self-closing hinges for heavy or high traffic gates SureClose® – Hydraulic hinge-closers ShutIt® BadAss™ – Heavy duty, weld or bolt-on hinges LokkBolt® & Q-Bolt™ – Drop-bolts for Metal, wood and Vinyl
8
GATE CONCEPTS
DDTECH.COM
D&D gate hardware for every application ROUND-POST CHAINLINK GATES Chainwire gates, also known as chainlink and chainmesh gates, are used for a variety of domestic, commercial or industrial applications, including tennis court fencing, factory/building enclosures, ball-game practice nets, sporting enclosures and temporary fencing. LokkLatch® ROUND – Lockable Gate Latch for round posts MagnaLatch® TP or VP with round-post adaptor kit TruClose® ROUND – Heavy Duty hinges for round posts Mini MultiADJUST™ – Round post hinge for regular gates ShutIt® BadAss™ – Weld-on or bolt-on heavy duty hinges GateStop™ – Reduces gate slam noise
HIGH SECURITY ACCESS GATES High-security pedestrian gates are designed to provide selfclosing and lockable access to secure people and property. Often used for commercial entry gates at schools, apartments, data Centres, strata buildings, government depots, police stations, industrial sites and other high security applications. LokkLatch® DELUXE – Key lockable, premium gate latch TruClose® Heavy Duty – Self-closing hinges for heavy gates SureClose® READYFIT – External mount hydraulic hinge-closers SureClose® FLUSH/Centre MOUNT – Hydraulic hinge-closers SlimLine by ASSA ABLOY - Hydraulic, vertical gate closer ShutIt® BadAss™ – Weld-on or bolt-on heavy duty hinges MagnaLatch Panic Bar + Access – Reliable magnetic latching
GLASS GATES Semi-frameless glass is typically 8mm or 10mm (5⁄16” or 3⁄8”) thick supported by steel or Aluminium round posts. The glass is then mounted into the post with rubber seals to prevent the glass from moving. D&D has developed a range of gate hardware to complement this style of modern pool fence or balustrading system. MagnaLatch® Side Pull – Lockable or non-lockable latches MagnaLatch Side Pull SS - Stainless steel magnetic latch (bracket required for glass application)
ROLLING ACCESS-CONTROL GATES Sliding gates are either on a track (wheels slide on metal track) or are of a cantilevered sliding gate system where the gate is structurally supported by rollers or wheels. LokkLatch® DELUXE – Key lockable, premium gate latch ShutIt® HardCore™ – Gate wheels and accessories
DDTECH.COM
GATE CONCEPTS
9
Choosing your latch or lock
MagnaLatch® ALERT Top Pull & Vertical Pull
MagnaLatch® Top Pull & Vertical Pull
MagnaLatch® Side Pull Lockable
GATE LATCH/LOCK PRODUCT MagnaLatch® S3 Top Pull & Top Pull ALERT.
Magnetic child safety gate latch. ALERT model with visual and audible alarms. Key Lockable.
MagnaLatch® S3 Vertical Pull & Vertical Pull ALERT. Magnetic front gate, side gate and pet safety gate latch. ALERT model with visual and audible alarms. Key Lockable.
MagnaLatch® Side Pull. General-purpose gate latch for
gates around homes and gardens. Available in lockable and unlockable models.
MagnaLatch® S2 Side Pull Stainless Steel.
Stylish, stainless steel, magnetic gate latch. Ideal for glass gates. With or without mounting brackets
MagnaLatch® S3 Side Pull Stainless Steel.
6-Pin/Yes
6-Pin/Yes
Wafer/No
N/A
Wafer/No
T-Latch®. Toggle-style gravity gate latch with “floating” latch bolt. Automatically compensates for gate sag. Padlockable.
Use Padlock
LokkLatch® REGULAR. Lockable gravity latch for general-
Wafer/No
LokkLatch® ROUND. Lockable gate latch for round-posted gates and fences. Includes adaptors for various diameters.
LokkLatch® PLUS. Privacy gate latch that locks and
operates from both sides of the gate. Semi-security lock cylinder. Smaller footprint than premium LokkLatch® DELUXE.
LokkLatch® DELUXE. Short bolt with Lockwood™ key.
Locks and operates from both sides of the gate. Lock cylinder can be rekeyed to match existing doors and accesses.
LokkLatch® DELUXE. Long bolt with Kwikset™ key.
Locks and operates from both sides of the gate. Lock cylinder can be rekeyed to match existing doors and accesses.
LokkLatch® MAGNETIC. Magnetic gate lock with unique
push/pull handles. Locks and operates from both sides of gate.
10
LATCH & LOCK GUIDE
Wafer/No
Wafer/No
6-Pin/Yes
6-Pin/Yes
6-Pin/Yes
MagnaLatch® Stainless Steel Side Pull PSS/BSS
LOCKS OR OPERATES FROM BOTH SIDES OF THE GATE
GAP VARIANCE
VERTICAL ADJUSTMENT
19mm
13-38mm
38mm
19mm
13-38mm
38mm
10mm
7-10mm 5 ⁄16 ”– ⅜”
10mm
8mm
8-10mm 5 ⁄16 ”– ⅜”
10mm
8mm
8-10mm 5 ⁄16 ”– ⅜”
10mm
19mm
10-44mm ⅜”–1¾”
13mm
19mm
¾”
10-38mm ⅜”–1½”
13mm
Yes, with External Access Button (EAB)
38mm 1½”
32-57mm 1¼”–2¼”
13mm
Yes, with External Access Button (EAB)
19mm
10-27mm ⅜”–11 ⁄16 ”
13mm
19mm
12-30mm ½”-13 ⁄16 ”
13mm
25mm 1”
12-38mm
13mm
19mm
10-32mm ⅜”–1¼”
13mm
LOCK TYPE/ IDEAL REKEYABLE GATE GAP
New stainless steel, locakble, magnetic gate latch in brushed or polished finish. With or without mounting brackets.
purpose gates around homes and gardens. Wafer keyed.
MagnaLatch® Side Pull Non-lockable
¾”
¾”
⅜”
⁵/¹⁶” ⁵/¹⁶” ¾”
¾”
¾”
¾”
DDTECH.COM
½”–1½”
½”–1½”
½”–1½”
1½” 1½”
⅜”
⅜”
⅜”
½”
½”
½”
½”
½”
½”
½”
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Check your latch applications and features
T-Latch™
LokkLatch® REGULAR
LokkLatch® PLUS
METAL
WOOD
VINYL
CHAINLINK
• • • •
• • • •
• • •
•* •*
• •
• •
•† •
LokkLatch® DELUXE3
GLASS
•** •**
• • •
PRIVACY GATES
• • •
DOUBLE DRIVE
•** •** •** •** •**
AVAILABLE IN WHITE
• • •
Not ALERT
Not ALERT
Non-Lockable
•*** •*** • • • •
• • • • •
POOL SAFETY GATES
LokkLatch® MAGNETIC
• • • • •
• •
*Using Round Post Adaptor Kit. **Check local pool barrier guidelines for proper installation methods. *** With EAB
DDTECH.COM
LATCH & LOCK GUIDE
11
Reliable Magnetic Closure Safety gates around pools, homes, childcare Centres, schools, playgrounds and wherever safety is critical, need hardware you can trust. D&D invented the MagnaLatch® over 35 years ago, and with millions installed worldwide, they continue to set the standard in compliant, child safety gates.
12
MAGNETIC LATCHES
DDTECH.COM
W
W
MAGNALATCH ® ALERT
MAGNALATCH ® TOP PULL
MAGNALATCH ® VERTICAL PULL
MAGNALATCH ® SIDE PULL
MAGNALATCH ® SS SIDE PULL
MAGNALATCH ® PANIC BAR
W SIDE PULL NON-LOCKABLE W
Available in white
HHHHH D&D Technologies distinguishes itself with its superior adjustability. Their MagnaLatch® pool safety latches allow for effortless vertical and horizontal adjustments, greatly simplifying the installation and maintenance process. This feature alone enables us to not only meet but exceed safety standards, setting a new benchmark for the industry. MICK - MACKAY SAFETY COMPLIANCE - MAGNALATCH ® SERIES 3
DDTECH.COM
MAGNETIC LATCHES
13
Safety Gate Latch with ELECTRONIC ALARMS
Keys
Battery
ALERT Top Pull
Replacements/Spares
ALERT Vertical Pull
CODE
Colour
MODEL FEATURE
IDEAL GAP
GAP VARIANCE
CODE
MODEL FEATURE
ML3ATP
Black
Top Pull 6-pin lock. Keyed alike + alarm
19mm (¾”)
13-38mm (½”–1½”)
ML3ASB
Replacement 3.6-volt ½ AA Battery
ML3AVP
Black
Vertical Pull 6-pin lock. Keyed alike + alarm
19mm (¾”)
13-38mm (½”–1½”)
ML3SKLA
Replacement Lockwood® Key (AU-NZ)
ML3SPACER
Black
Gate Gap Spacer
50mm (2”)
-
ML3SKKA
Replacement KwikSet® Key (US)
MagnaLatch® comes standard with a gate gap variance of 13-38mm (½”–1½”). For larger gaps of up to 50mm (2”), an optional spacer is available (see left). Install the spacer behind the Striker mounting plate to ensure proper latch installation and operation. 50mm (2”) Gate Gap Spacer fits MagnaLatch® Series 2, 3 and ALERT models.
62mm 2 7/16"
MagnaLatch® ALERT Top Pull
34mm 1 5/16"
27mm 1 1/16"
Gate gap spacer
MagnaLatch® ALERT Vertical Pull
27mm 1 1/16"
34mm 1 5/16"
GAP VARIANCE [13mm] 1/2" - [38mm] 1 1/2" GAP VARIANCE [13mm] 1/2" - [38mm] 1 1/2"
85mm 3 3/8"
520mm 20 1/2"
85mm 3 3/8"
56mm 2 3/16"
316mm 12 7/16"
56mm 2 3/16"
62mm 2 7/16"
29mm 1 1/8"
73mm 2 7/8"
73mm 2 7/8"
29mm 1 1/8"
54mm 2 1/8"
54mm 2 1/8" 85mm 3 3/8"
14
MAGNETIC LATCHES
DDTECH.COM
85mm 3 3/8"
The ultimate gate protection • World’s ONLY safety gate latch with built-in electronic alarms • Visual and audible alarms (flashing LEDs + sound alert) • No wiring or electricians required (easy installation) • Single alert beep each time gate is entered/exited • Alarms notify if gate is open or not securely latched • Full alarm mode only if gate left open 15+ seconds • Optional: Touch-sensor disarm feature • Long-life lithium battery included • IP55 rating – tested to withstand dust and water in mechanism Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
®
DDTECH.COM
MAGNETIC LATCHES
15
The Original Magnetic Child Safety gate latch
ML3TP Series 3 Top Pull
ML3VP Series 3 Vertical Pull
ML3RPK Round-Post Adaptor Kit
CODE
Colour
MODEL FEATURE
IDEAL GAP
GAP VARIANCE
ML3TP
Black
Top Pull: 6-pin lock, keyed alike
19mm (¾”)
13–38mm (½”–1½”)
ML3TPKAWT
White
Top Pull: 6-pin lock, keyed alike
19mm (¾”)
13–38mm (½”–1½”)
ML3VP
Black
Vertical Pull: 6-pin lock, keyed alike
19mm (¾”)
13–38mm (½”–1½”)
ML3VPKAWT
White
Vertical Pull: 6-pin lock, keyed alike
19mm (¾”)
13–38mm (½”–1½”)
ML3RPK
Black
ML3 Round-Post Adaptor Kit
38mm (1½”)
32–57mm (1¼”–2¼”)
ML3SPACER
Black
Gate Gap Spacer
50mm (2”)
-
MagnaLatch® S3 Top Pull
MagnaLatch® S3 Vertical Pull 62mm 2 7/16"
62mm 2 7/16"
GAP VARIANCE [13mm] 1/2" - [38mm] 1 1/2"
316mm 12 7/16"
64mm 2 1/2"
56mm 2 3/16"
GAP VARIANCE 13mm] 1/2" - [38mm] 1 1/2"
29mm 1 1/8"
73mm 2 7/8"
520mm 20 1/2"
64mm 2 1/2"
Keys
27mm 1 1/16"
34mm 1 5/16"
27mm 1 1/16"
34mm 1 5/16"
Gate Gap spacer
54mm 2 1/8"
CODE
MODEL FEATURE
ML3SKLA
Replacement Lockwood® Key (AU-NZ)
ML3SKKA
Replacement KwikSet® Key (US)
MagnaLatch® comes standard with a gate gap variance of 13-38mm (½”–1½”). For larger gaps of up to 50mm (2”), an optional spacer is available (see left). Install the spacer behind the Striker mounting plate to ensure proper latch installation and operation. 50mm (2”) Gate Gap Spacer fits MagnaLatch® Series 2, 3 and ALERT models.
MagnaLatch® S3 Round-Post Adaptor An optional kit for mounting all MagnaLatch ‘Top Pull’ or ‘Vertical Pull’ models to gates and fences with round posts.
29mm 1 1/8"
73mm 2 7/8"
49 mm 1 15/16" 83 mm 3 1/4"
[65mm] 2 9/16" [38mm] 1 1/2"
[48mm - 51mm] 1 7/8" - 2"
[73mm] 2 7/8"
54mm 2 1/8"
16
MAGNETIC LATCHES
[60mm] 2 3/8"
[41mm] 1 5/8"
[54mm] 2 1/8"
[35mm] 1 3/8"
42mm 1 11/16"
DDTECH.COM
Industry leading safety features • The world's most trusted lockable safety gate latch • Ideal for residential or commercial safety gates • Improved, stylish “Series 3’ design • Industry leading magnetic latching technology • 6-pin lock for higher security (rekeyable, to match doors) with a “Red dot” visual locking indicator showing Locked/Unlocked status • Vertically & horizontally adjustable Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
DDTECH.COM
MAGNETIC LATCHES
17
World’s First Magnetic Latching Panic Bar + MagnaLatch® Access Attachment
PANIC BAR
MAGNETIC SOLUTIONS
ML3PB36RTPLA (AU)
ML3PB36RVPLA (US ONLY) 35mm 1 3/8"
35mm 1 3/8" 48mm 100mm 1 7/8" 3 15/16"
55mm 2 1/8"
30mm 1 3/16"
50mm 2"
203mm 8"
13mm 1/2" 22mm 7/8"
ETIC SOLUTIONS
51mm 2"
65mm 2 9/16"
773mm 30 7/16"
IC BAR
GATE GAP [11 - 24mm] 7/16 - 15/16"
51mm 2"
794mm 31 1/4"
84mm 3 5/16"
51mm 2"
65mm 2 9/16"
194mm 7 5/8" 194mm 7 5/8"
55mm 2 1/8"
194mm 7 5/8"
50mm 30mm 2" 1 3/16"
458mm 18 1/16" 334mm 13 3/16"
536mm 21 1/8"
50mm 1 15/16"
84mm 3 5/16"
MagnaLatch® Access for TP and VP
29mm 1 1/8"
536mm 21 1/8"
6 3/16"
15mm 9/16"
458mm 18 1/16"
POST WIDTH 51mm 2"
95mm 3 3/4"
51mm 2"
794mm 31 1/4"
54mm 2 1/8"
POST WIDTH 51mm 2"
18
MAGNETIC LATCHES
194mm 7 5/8"
458mm 18 1/16" 794mm 31 1/4"
DDTECH.COM
51mm 2"
54mm 2 1/8"
150mm 5 7/8"
84mm 3 5/16"
51mm 2"
65mm 2 9/16"
87mm 3 3/8"
194mm 7 5/8"
6 3/16"
GATE GAP [11 - 24mm] 7/16 - 15/16"
334mm 13 3/16"
19mm 3/4"
150mm 5 7/8"
29mm 1 1/8"
ML3PB36R MagnaLatch® Panic Bar
194mm 7 5/8"
50mm 1 15/16"
150mm 5 7/8"
ML3PB36R
GATE GAP [11 - 24mm] 7/16 - 15/16"
Renowned safety features, reliable magnetic latching ML3PB36R MagnaLatch® Panic Bar
MagnaLatch® Access for TP & VP
CODE
Colour
MODEL FEATURE
IDEAL GAP
ML3PB36RTPLA*
Black
ML3PB36RVPKA
Black
transparent backgrounds and PMS colours MagnaLatch S3 Vertical Pull Panic Bar + Access Lockwood Keyed Alike 13mm (½") the icons need to be AI files to work in
ML3PB36R
Black
915mm (36”) Panic Bar with Rim Strike Plate, Panic Bar only 13mm (½") If changes are made they need to be saved
MagnaLatch S3 Top Pull Panic Bar + Access Lockwood Keyed Alike
13mm (½")
Please Note: Because of the drop shadows,
Indesign.
* Note a shield is required on the panic bar when paired with Top Pull Access
as AI and EPS and exported as PNG formats for other applications if needed.
GAP VARIANCE 11-24mm (⁷⁄¹⁶ -¹⁵⁄¹⁶") 11-24mm (⁷⁄¹⁶ -¹⁵⁄¹⁶") 11-24mm (⁷⁄¹⁶ -¹⁵⁄¹⁶")
UV stabilised, MagnaLatch® Panic Bar • Compatible with a range of common locks including levers, coded, electronic & smart • Magnetic latching - no mechanical resistance • Magnet allows for greater intraday movement – not usually found in traditional panic bars • For external use – corrosion resistant components • Horizontally adjustable up to 13mm (½”) • Gate gap variance: min 11mm to max 24mm • Suitable for ADA standards
MagnaLatch® Access • Lockable, Top Pull or Vertical Pull latch attachment • ML3PB36RVPKA not available in Australasia. • ML3PB36RTPLA not available in North America. • Provides a corrosion resistant, unsurpassed public safety system • ACCESS universal release knob, for easy operation and child safety • Latch can be locked when not in use
DDTECH.COM
Permanent magnets are sealed Quality tested to ensure ongoing performance and reliability, that will not fail with use or from environmental impact.
MAGNETIC LATCHES
19
Stainless steel Side Pull latch • Polished or Brushed surface finishes • Lockable and non-lockable versions • 316 marine-grade stainless steel • Corrosion-resistant latch bolt • No visible fasteners (blind fixing from rear) • With or without glass brackets
CODE
FINISH
GATE GAP
ML3SPLBSS
S3 Brushed Stainless Steel lockable latch
8-10mm (⁵/¹⁶ - ³/⁸”)
ML3SPLBSSG2G
Brushed Stainless Steel lockable + bracket
8-10mm (⁵/¹⁶ - ³/⁸”)
ML3SPLPSS
S3 Polished Stainless Steel lockable latch
8-10mm (⁵/¹⁶ - ³/⁸”)
ML3SPLPSSG2G
Polished Stainless Steel lockable + bracket
8-10mm (⁵/¹⁶ - ³/⁸”)
MLSPS2VPSS
S2 Polished Stainless Steel latch
8-10mm (⁵/¹⁶ - ³/⁸”)
ML3SLSS - ML3SLBSSG2G
ease Note: Because of the drop Please shadows, Note: Because of the drop shadows, ansparent backgrounds and PMS transparent colours backgrounds and PMS colours he icons need to be AI files to work the icons in need to be AI files to work in design. Indesign.
MLSPS2VBSS
S2 Brushed Stainless Steel latch
Brushed
Polished
8-10mm (⁵/¹⁶ - ³/⁸”)
MLSPS2LGHK S2 Lockable Glass Kit with brackets changes are made they need to If changes be savedare made they need to be saved
For Glass
s AI and EPS and exported as PNG as AIformats and EPS and exported as PNG formats r other applications if needed.for other applications if needed.
M5 5/16" [8mm] IDEAL GATE GAP
1/2" 5/16" [8mm] - [12mm]
1 5/8" 42mm
1 5/8" 42mm
1/2" 12mm
5/16" [8mm] IDEAL GATE GAP 5/8" 16mm
5/8" 16mm
3 7/8" 99mm 1 5/16" 33mm
1 5/16" 33mm
1 1/8" 29mm
1 1/8" 29mm
20
MAGNETIC LATCHES
1 5/16" 33mm
2 3/4" 70mm
2 3/4" 70mm
1 5/16" 33mm
3 7/8" 99mm
DDTECH.COM
1 1/8" 28mm
The original, versatile magnetic latch • Small & unobtrusive latch - easy to install • Lockable and non-lockable models • Model for round-post-to-glass gates • Vertically & horizontally adjustable • Snap-fit dress caps - no visible fasteners • Will not rust or corrode Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
1
CODE
MODEL - FEATURE
IDEAL GAP
GAP VARIANCE
MLSPS2L
Key Lockable Side Pull
10mm (⅜”)
7–10mm (⁵/¹⁶”–¹¹/¹⁶”)
MLSPS2
Side Pull non-lockable
10mm (⅜”)
7–10mm (⁵/¹⁶”–¹¹/¹⁶”)
Side Pull: non-lockable
DDTECH.COM
MAGNETIC LATCHES
21
Lockable, polymer latches Proudly Australian-made from durable polymer and stainless steel components, these latches are rust-resistant and easy to install and adjust. Ideal for privacy gates in residential or commercial applications. Some models are lockable from both sides of the gate and can be rekeyed to match existing locks, offering enhanced security and convenience.
22
LOCKABLE LATCHES
DDTECH.COM
W LOKKLATCH ® REGULAR
LOKKLATCH ® REGULAR ROUND
LOKKLATCH ® PLUS
LOKKLATCH ® MAGNETIC
T-LATCH ®
W LOKKLATCH ® DELUXE W
Available in white
HHHHH “Some people want to go with the cheapest option, but that will cost more later when someone has to come out and replace it. They just don’t stand the test of time the way D&D products do. They’re just a great latch, pretty much the perfect design for a residential gate. The fact that they have easy adjustment built in is super handy. I would recommend this lock to anyone.” JOSH - SELECT FENCING - LOKKLATCH ® DELUXE
DDTECH.COM
LOCKABLE LATCHES
23
General-Purpose, Lockable Latch S3 • Key lockable - no need for padlock • Optional External Access Push-Button • Fits fence posts 25-150mm (1” - 6”) deep • Quick and easy to install and adjust Vertically to 10mm (⅜”) Horizontally 38mm (1½”) • Industrial-strength polymer construction • Stainless-steel latching trip plate and striker pin • Won’t rust or corrode • Short and long striker models available • Round-post model fits most chainlink gates
Latch Only (LL3A)
White Latch (LL3AW)
CODE
FEATURE
Colour
GATE MATERIAL
IDEAL GAP
GAP VARIANCE
LL3A
LokkLatch® Series 3
Black
Metal, Wood, Vinyl
19mm (¾”)
10-38mm (⅜”–1½”)
LL3AB
LokkLatch® Series 3 + External Access Button
Black
Metal, Wood, Vinyl
19mm (¾”)
14–32mm (9/16””–1¼”)
LL3AW
White LokkLatch® Series 3
White
Metal, Wood, Vinyl
19mm (¾”)
10-38mm (⅜”–1½”)
LL3ABW
LokkLatch® Series 3 + External Access Button
White
Metal, Wood, Vinyl
19mm (¾”)
14–32mm (9/16””–1¼”)
LL3AL
Latch with Long Striker
Black
Metal, Wood, Vinyl
22mm (7/8”)
10-38mm (⅜”–1½”)
LL3ABL
Latch with Long Striker + External access Button
Black
Metal, Wood, Vinyl
22mm (7/8”)
14–38mm (9/16”–1½”)
LL3ALW
White Latch Long Striker
White
Metal, Wood, Vinyl
22mm (7/8”)
10-38mm (⅜”–1½”)
LL3ABLW
White Latch Long Striker + External Access Button
White
Metal, Wood, Vinyl
22mm (7/8”)
14–38mm (9/16”–1½”)
LL3B
External Access Button Accessory
Black
Metal, Wood, Vinyl
–
–
External Access Button Accessory
White
Metal, Wood, Vinyl
–
–
Latch+EAB for Round /Chainlink Post
Black
Chainlink
38mm (1½”)
32 – 57mm (1¼” –2¼”)
LL3BW LL3ABRND
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
24
LOCKABLE LATCHES
DDTECH.COM
External Access Button (LL3B)
Round post model for chainlink fences
Square Post model with EAB (LL3ABL)
Round Post External Access Button
Round Post model (LL3ABRND)
DDTECH.COM
LOCKABLE LATCHES
25
PREMIUM Privacy & Security Gate Latch
26
LOCKABLE LATCHES
Colour
KEYED
GATE MATERIAL
IDEAL GAP GAP VARIANCE
LOCKS
CODE
KEYABL RE
E
6-PIN
• Operates and locks from both sides of gate • New ‘fitting jig’ provides easier, faster installation • New ball-joint Connecting Rod simplifies installation • Two latch-bolt lengths (models) for different gates • Requires one 13mm (½") drilled hole through post • Keyed-alike or keyed different options • Dual 6-pin locks can be rekeyed to match doors etc. • Includes 125 & 150mm (5” & 6”) rods (spare if needed) • Vertically & horizontally adjustable • Industrial-strength polymer construction • 316 marine-grade stainless components • Fits fence posts 38–150mm (1½–6”) deep • Minimum post width 38mm (1½”)
STRIKER
LLD3KA
Black
Alike
Metal, Wood, Vinyl
25mm (1”)
12-38mm (½”–1½”)
LLD3KD
Black
Different
Metal, Wood, Vinyl
25mm (1”)
12-38mm (½”–1½”)
Long bolt
LLD3KAW
White
Alike
Metal, Wood, Vinyl
25mm (1”)
12-38mm (½”–1½”)
Long bolt
LLD3KDW
White
Different
Metal, Wood, Vinyl
25mm (1”)
12-38mm (½”–1½”)
Long bolt
LLD3LA
Black
Alike
Metal, Wood
19mm (¾”)
12–30mm (½“ to 13/16“)
Short bolt
LLD3LD
Black
Different
Metal, Wood
19mm (¾”)
12–30mm (½“ to 13/16“)
Short bolt
DDTECH.COM
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
Long bolt
Also available in white
KEYABL RE
E
LOCKS
6-PIN
LokkLatch® DELUXE S3 Long latch bolt
LokkLatch® DELUXE S3 Short latch bolt
DDTECH.COM
LOCKABLE LATCHES
27
LOKKLatch
®
PLUS
Privacy Gate Latch • Operates from both sides with EAB • Innovative alignment jig for easy installation • Includes 125 & 150mm (5 & 6”) connector rods • Wafer key with over 200 combinations • Keyed alike and keyed different options • Vertically and horizontally adjustable • Will not rust, bind or stain • Industrial-strength polymer construction • 316 marine-grade stainless components • Fits fence posts 25–150mm (1”– 6”) deep
LL3PWAWT White Model CODE LL3PWD
Colour Black
KEYED
GATE MATERIAL
IDEAL GAP
GAP VARIANCE
19mm (¾”)
10–35mm (3/8”–13/8”)
Metal, Wood, Vinyl
19mm (¾”)
10–35mm (3/8”–13/8”)
Metal, Wood, Vinyl
19mm (¾”)
10–35mm (3/8”–13/8”)
Different Metal, Wood, Vinyl
LL3PWA Black Alike Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
LL3PWAWT White Alike If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
External Access Button (EAB)
1
28
LOCKABLE LATCHES
DDTECH.COM
Lockable, Dual-sided Push/Pull Handle
KEYABL RE
E
LOCKS
6-PIN
• Operates and locks from both sides of gate • Ergonomic Push/Pull handled design • Requires only one drilled hole through post • Proven magnetic latching technology • Black trim covers included • No visible fasteners • Keyed-alike or keyed different options • Dual 6-pin rekeyable locks • Vertically & horizontally adjustable • Fits fence posts 38–150mm (1½”–6”) deep
CODE
Colour
KEYED
LLMKABT/LLMLABT
Black
Alike
LLMKDBT/LLMLDBT
Black
Different
IDEAL GAP
GAP VARIANCE
19mm (¾”)
10-32mm (⅜”–1¼”)
19mm (¾”)
10-32mm (⅜”–1¼”)
Please Note: Because Please Note: of theBecause drop shadows, of the drop shadows, transparent backgrounds transparentand backgrounds PMS colours and PMS colours the icons needthe to be icons AI files need toto work be AI infiles to work in Indesign. Indesign.
If changes are If made changes they are need made to be they saved need to be saved as AI and EPS and as AI exported and EPS as and PNG exported formats as PNG formats for other applications for other if applications needed. if needed.
58mm 2 1 4"
99mm 378"
29mm 1 1 8"
48mm 1 78"
38mm 1 1 2"
29mm 1 1 8"
55mm 21 8"
100mm 315 16 "
108mm 41 4" 29mm 1 1 8"
221mm 8 11 16 "
58mm 2 1 4"
99mm 378"
29mm 1 1 8"
29mm 1 1 8"
38mm 1 1 2"
100mm 315 16 "
48mm 1 78"
108mm 41 4" 29mm 1 1 8"
221mm 8 11 16 "
55mm 21 8"
DDTECH.COM
LOCKABLE LATCHES
29
Padlockable Gravity Gate Latch • Toggle-action design compensates for gate sag • Ideal for gates prone to ground movement • Fits to all square posts & gate frames • Padlockable, with padlock storage feature • Vertically and horizontally adjustable • Industrial-strength polymer construction • Stainless steel toggle/latch bolt Padlock security. Padlock storage feature.
Padlock not included. Please Note: Because of the drop shadows,
CODE Colour transparent backgrounds and FEATURE PMS colours the icons need to be AI files to work in Indesign.
TL01
Black
GATE MATERIAL IDEAL GAP
Padlockable latch Metal, Wood, Vinyl 25mm (1”)
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
GAP VARIANCE 10–44mm (⅜”–1¾”)
ADJUSTS HORIZONTALLY
PADLOCK NOT INCLUDED Recommended padlock: Fits most standard shackle padlocks 40mm (19⁄16 ” ) [ 40mm ] 19 " 16
5mm 3 16 "
15mm 19 " 32 15mm 19 32"
120mm 120mm 23 4 32" 23 4 32"
LOCKABLE LATCHES
TOGGLE ACTION
5mm 3 16 "
[ 40mm ] 1 916 "
30
ADJUSTS VERTICALLY
1
DDTECH.COM
24mm 15 16 " 24mm 15 16 "
24mm 15 16 " 24mm 15 16 "
Convenient Gate Kits
Australia & New Zealand
ML3KFSK
LLD3LDTCHD1A
MagnaLatch® Series 3 Gate Latch plus KwikFit™ SelfClosing (fixed tension) hinges to provide pedestrian access gate kit. For metal and wood gates up to 20kg (44 lb).
LokkLatch® DELUXE S3 Privacy & Security Gate Latch plus TruClose® Heavy Duty self-closing safety hinges. For metal or wood gates up to 70kg (154 lb). Also available in White LLD3KDTCHD1AL2WT USA Code: 8000-2079
USA Code: 8000-1025
MTSTDKS3LA
LLD3LDTCA1S3
MagnaLatch® Series 3 Child Safety Gate Latch plus TruClose® Regular self-closing safety gate hinges with Hinge Safety Cap. For metal gates up to 30kg (66 lb) .
LokkLatch® DELUXE S3 Privacy & Security Gate Latch plus TruClose® Regular self-closing safety hinges. For metal gates up to 30kg (66 lb).
USA Code: 8000-2051
MTSTDKS3LLA
LL3PWDTCA1
MagnaLatch® Series 3 Safety Gate Latch plus TruClose® Regular self-closing safety hinges with side-fixing legs and Hinge Safety Cap. For metal gates to 30kg (66 lb).
LokkLatch® PLUS Medium-Security Gate Latch plus TruClose® Regular self-closing safety gate hinges. For metal gates up to 30kg (66 lb).
US Code: 8000-1080
US Code: 8000-1080
TL01KFP
LL3AKFPK
T-Latch™ padlockable, toggle-style general-purpose gate latch plus KwikFit™ Plain Pivot Hinges. For metal or wood gates up to 25kg (55 lb).
LokkLatch® REGULAR S3 General-Purpose, Gate Latch plus KwikFit™ Plain Pivot Hinges. For metal or wood gates up to 25kg (55 lb).
PRODUCT
USA ONLY PRODUCT CODES FOR GATE KITS – CONTACT YOUR SALES REP FOR FURTHER DETAILS
T-Latch™
• 8000-2146 • 8000-2067
LokkLatch® Reg S3
• 8000-1000 • 8000-1009 • 8000-1012 • 8000-1016 • 8000-1021 • 8000-1032 • 8000-1033 • 8000-1049 • 8000-1098 • 8000-2054 • 8000-2104 • 8000-2107 • 8000-2138 • 8000-2150 • 8000-2152
LokkLatch® PLUS
• 8000-2156
LokkLatch® DELUXE S3
• 8000-2010 • 8000-2019 • 8000-2056 • 8000-2057 • 8000-2079 • 8000-2108 • 8000-2149
LokkLatch® MAGNETIC
• 8000-2111 • 8000-2116 • 8000-2154
MagnaLatch® SIDE PULL
• 8000-2119 • 8000-2142 • 8000-2148
MagnaLatch® VP
• 8000-2072 • 8000-2073 • 8000-2114
MagnaLatch® TP
• 8000-1001 • 8000-1025 • 8000-1026 • 8000-1035 • 8000-1080 • 8000-1081 • 8000-1099 • 8000-2051 • 8000-2071 • 8000-2141
DDTECH.COM
LATCH + HINGE KITS
USA POLYMER GATE KITS
31
Self-closing, polymer hinges TruClose® award-winning polymer hinges were devised to overcome all the traditional hinge problems of rust, binding, sagging and staining. Industrial-grade polymers and stainless-steel closing springs deliver hinges designed to last a lifetime.
HHHHH ” We installed TruClose® hinges on over 3,000 gates with no warranty claims or complaints! The UV protection, stainless steel components, adjustable tension settings, and the non-corrosiveness of TruClose® hinges are critical for the hinge to survive in the extreme environments that our safety gates are installed.” AMBER - SECURE GATES USA
32
SELF-CLOSING HINGES
DDTECH.COM
W TRUCLOSE ® REG METAL
W TRUCLOSE ® REG METAL/WOOD
TRUCLOSE ® REG WOOD/VINYL
TRUCLOSE ® HD METAL/WOOD/VINYL
TRUCLOSE ® HD WOOD/VINYL
W TRUCLOSE ® HD METAL
W
W
TRUCLOSE ® MULTI-ADJUST TM HD METAL/VINYL/WOOD
TRUCLOSE ® MULTI-ADJUST TM METAL/VINYL/WOOD
TRUCLOSE ® MULTI-ADJUST TM HD CHAINLINK
TRUCLOSE ® ROUND TM CHAINLINK
W
TRUCLOSE ® DECOMOLD
Available in white
DDTECH.COM
SELF-CLOSING HINGES
33
TCA1S3
TCA2S3
TCHD1AS3
TCA3S3
TCHD1S3
TCHD2L1SS3
TRUCLOSE REGULAR RANGE
PRODUCT CODE TRIM COVER OPTIONS
TRUCLOSE HEAVY DUTY RANGE
TCA4
TCAMA1&2
TCHDMA1S3/ TCHDMA2S3
TCAMA2RND
TCHDRND1S3
TCHDRND2S3
MAXIMUM SELF-CLOSING ALIGNMENT LEGS WEIGHT*
GATE MATERIAL
IDEAL GATE GAP
GAP VARIANCE
Metal
19mm (3⁄4 ”)
9-22mm (3⁄8 ”– 7⁄8 ”)
30kg 66 lb
Optional
Metal to Wood 19mm (3⁄4 ”)
9-22mm (3⁄8 ”– 7⁄8 ”)
30kg 66 lb
Optional
TCA1S3
Gloss Black, White
TCA2S3
Gloss Black
TCA3S3
Gloss Black, White
Wood, Vinyl
19mm (3⁄4 ”)
9-22mm (3⁄8 ”– 7⁄8 ”)
30kg 66 lb
Optional
TCA4
NA
Wood
19mm (3⁄4 ”)
9-22mm (3⁄8 ”– 7⁄8 ”)
25kg 55 lb
No
TCAMA1/2
NA
Metal, Wood, Vinyl
35mm (13⁄8 ”)
22–50mm (7⁄8 ”–2”)
25kg 55 lb
Yes
TCAMA2RND
NA
Chainlink
35mm (13⁄8 ”)
22–50mm (7⁄8 ”–2”)
25kg 55 lb
Yes
TCHD1AS3
Gloss Black, White
Metal
19mm (3⁄4 ”)
9–25mm (3⁄8 ”–1”)
70kg 155 lb
Optional
TCHD1S3
Gloss Black
Metal, Wood, Vinyl
19mm (3⁄4 ”)
9–25mm (3⁄8 ”–1”)
70kg 155 lb
Optional
TCHD2L1SS3
Gloss Black
Wood, Vinyl
19mm (3⁄4 ”)
9–25mm (3⁄8 ”–1”)
70kg 155 lb
Yes
TCHD2L2S3
Gloss Black
Wood, Vinyl
Fixed at 21mm (13⁄16 ”)
Fixed at 21mm (13⁄16 ”)
70kg 155 lb
Yes
TCHDMA1S3
Black, White
Vinyl, Composite
25mm (1”)
16–43mm (5⁄8 ”–111 ⁄16 ”)
70kg 155 lb
Yes
TCHDMA2S3
Black
Wood Composite
25mm (1”)
5–43mm (3 ⁄16 ”–111 ⁄16 ”)
70kg 155 lb
No
TCHDRNDS3 1/2
NA
Chainlink
25mm (1”)
19–35mm (3⁄4 ”–13⁄8 ”)
60kg 132 lb
Yes
*Ratings are based upon two hinges on a maximum gate size of: Regular hinges: 1500mmH x 900mmW (5’H x 3’W) Heavy Duty hinges: 1800mmH x 1200mmW (6’H x 4’W)
34
SELF-CLOSING HINGES
DDTECH.COM
Decorative, Self-Closing T-Hinge for Wood Gates
200mm 778"
1
2
3
CODE
GATE MATERIAL
TCA4
Wood
4
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
IDEAL GATE GAP
GAP VARIANCE
Colour
19mm (¾”)
6–22mm (¼”–⅞”)
Black
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
155lb 70kg
66 lb 30kg
44 lb 20kg
55 lb 25kg
6.5mm 1 " 4
40mm 19 " 16
DDTECH.COM " 8
187mm 711 32"
mm
40mm 1 916 "
• Self-closes gates up to 25kg (55 lb) • Won’t rust, bind, sag or stain • UV stabilized, industrial-strength polymer construction • Stainless steel internal spring • Molded Centre rib for added strength • Fasteners included
187mm 711 " 32
SELF-CLOSING 6.5mm HINGES 1 " 4
35
Adjustable, Self-Closing Hinges for gates up to 30kg (66 lb)
TCA1S3 – METAL
TCA2S3 – METAL/WOOD/VINYL
TCA3S3 – WOOD/VINYL
• Ideal for pool and child safety gate applications • D&D-patented tension adjustment • Won’t rust, bind, sag or stain • Adjust tension from either end (adjustment always facing up) • UV-stabilized, industrial-strength polymer construction • Self-lubricating durability; requires no maintenance • Internal stainless steel closing spring • Trim Cover options - Gloss Black or White • Hinges sold as pairs; Hinge Safety Caps as single units
TruClose® Hinge Cap
Optional use. Helps prevent toddlers from using bottom hinge as a climbing foothold. CODES: TCACAPS3/ TCACAPS3WT
TCA1S3
TCA2S3 25mm
25mm 1"
21mm 8 10 "
25mm
1"
1"
TCA3S3 55mm 2 316"
55mm 2316 "
22mm 7 " 8
22mm 7 8"
22mm 7 8"
22mm 7 " 8
21mm 8 " 10
21mm 8 " 10
55mm 2 316 " 22mm 7 8"
22mm 7 " 8
34mm
1 11 32"
104mm 4332"
75mm 31 2 32"
46mm
1 13 16 "
46mm 1 13 16 "
34mm 11 32"
1
132mm 53 " 16
32.5mm 1 932"
46mm
1 13 16 "
32.5mm 1 932"
44mm
1 2332"
36
96mm 32532"
44mm
96mm 25 3 32"
SELF-CLOSING HINGES
1 2332"
DDTECH.COM
96mm 25 3 32"
44mm 23 32"
1
TCA1S3WT
TCA1L2S3BT
CODE
TRIM FINISH
TCA1S3BT
Gloss Black
Metal
–
19mm (¾”)
9–22mm ( ⁄8 ”–
7
TCA1S3WT
White
Metal
–
19mm (¾”)
9–22mm ( ⁄8 ”–
7
TCA1L2S3BT
Gloss Black
2 Legs
3 3
⁄16 ”)
–
⁄16 ”)
–
13
Fixed at 21mm (
GAP VARIANCE
13
White
Metal
2 Legs
TCA2S3BT
Gloss Black
Metal/Wood
–
¾” (19mm)
TCA2L2S3BT
Gloss Black
Metal/Wood
2 Legs
Fixed at 21mm (13⁄16 ”)
TCA3S3BT
Gloss Black
Vinyl/Wood
-
19mm (¾”)
TCA3L2S3BT
Gloss Black
Vinyl/Wood
2 Legs
Fixed at 21mm (13⁄16 ”)
–
TCA3L2S3WT
White
Vinyl/Wood
2 Legs
Fixed at 21mm (13⁄16 ”)
–
Hinge Cap
–
–
–
Hinge Cap
–
–
–
the icons need to be AI files to work in Indesign.
TCACAPS3WT
White
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
3
Metal
IDEAL GATE GAP
TCA1L2S3WT
Please Note: Because of the drop shadows, TCACAPS3 Gloss Black transparent backgrounds and PMS colours
2
GATE MATERIAL SIDE LEGS
4
155lb 70kg
66 lb 30kg
Fixed at 21mm (
44 lb 20kg
55 lb 25kg
DDTECH.COM
9–22mm ( ⁄8 ”– 3
⁄8 ”) ⁄8 ”)
ALIGNMENT LEGS ⁄8 ”)
7
– 9–22mm ( ⁄8 ”– 3
⁄8 ”)
7
(“L2” models): Quick-fit alignment legs for fast-align installation and added fixing strength. Two legs provide secure, double-face fixing.
1
2
3
SELF-CLOSING HINGES
37
41
Adjustable, Self-Closing Hinges for heavy/high-traffic gates up to 70kg (155 lb)
TCHD1AS3 – METAL
TCHD1S3 – METAL/VINYL/WOOD
TCHD2L2S3 – VINYL/WOOD
• Suitable for use on pool and child safety gate applications • D&D-patented tension adjustment • Won’t rust, bind, sag or stain • Adjust tension from either end (adjustment always facing up) • UV-stabilized, industrial-strength polymer construction • Self-lubricating durability; requires no maintenance • Internal stainless steel closing spring • Trim Cover options - Gloss Black, or White • Hinges sold as pairs, Hinge Safety Caps as single units
TruClose® Hinge Cap
Optional use. Helps prevent toddlers from using bottom hinge as a climbing foothold. CODES: TCHDCAPS3/ TCHDCAPS3WT
TCHD1AS3
TCHD1S3 49mm
35mm 1 38"
21mm 8 10 "
27mm 1 1 16 "
1 15 16 "
35mm 1 38"
27mm 1 1 16 "
27mm 1 1 16 "
56mm 2 316"
38
1 15 16 " 27mm 1 1 16 "
27mm 11 " 16
49mm
22mm 7/8"
45mm 1 3/4"
44.5mm 1 34"
121mm 4 3/4"
19mm 3 " 4
SELF-CLOSING HINGES
21mm 8 10 "
78mm 31 16 " 27mm 11 " 16
176mm 15 6 16 "
118.5mm 11 4 16 "
90.5mm 3916 "
121mm 434"
21mm 8 10 "
TCHD2S3 78mm 31 16 "
56mm 2316 "
56mm 23 " 16
19mm 3 " 4
44.5mm 1 34"
DDTECH.COM
121mm 434"
47mm 17 " 8
44.5mm 3 1 4"
TCHD1AS3 TCHD1AS3WT
TCHD1AS3BT
CODE
TRIM FINISH
GATE MATERIAL SIDE LEGS
IDEAL GATE GAP
GAP VARIANCE
TCHD1AS3BT
Black
Metal
-
19mm (3⁄4 ”)
9–25mm ( ⁄8 ”–1”)
TCHD1AS3WT
White
Metal
-
19mm (3⁄4 ”)
9–25mm ( ⁄8 ”–1”)
TCHD1AL1S3BT
Black
Metal
1 Leg
19mm (3⁄4 ”)
9–25mm ( ⁄8 ”–1”)
TCHD1AL2S3WT
White
Metal
2 Legs
Fixed at 21mm (13⁄16 ”)
-
⁄16 ”)
-
3 3 3
13
TCHD1AL2S3BT
Black
Metal
2 Legs
TCHD1S3BT
Black
Metal/Wood/Vinyl
-
19mm (3⁄4 ”)
9–25mm ( ⁄8 ”–1”)
TCHD1L2S3BT
Black
Metal/Wood/Vinyl
2 Legs
Fixed at 21mm (13⁄16 ”)
-
TCHD2L1SS3BT
Black
Vinyl/Wood
1 Leg
19mm (3⁄4 ”)
9–25mm ( ⁄8 ”–1”)
TCHD2L2S3BT
Black
Vinyl/Wood
2 Legs
Fixed at 21mm (13⁄16 ”)
-
TCHDCAPS3 Black Please Note: Because of the drop shadows,
Hinge Cap
–
–
–
Hinge Cap
–
–
–
transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
TCHDCAPS3WT
White
Fixed at 21mm (
3
ALIGNMENT LEGS “L2” & “L1” models: Quick-fit alignment legs for faster installation and added fixing strength. Two legs provide secure, double-face fixing.
3
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
1
2
3
4
155lb 70kg
66 lb 30kg
44 lb 20kg
DDTECH.COM
2
3
SELF-CLOSING HINGES
39
55 lb 25kg
1
41
Self-closing hinges for round-post applications • Easy tension adjustment from both ends • Includes adaptors for various post diameters • Right- or left-handed gate-swing installation • Side-fixing legs for fast alignment and extra fixing strength • Self-closes gates up to 70kg (154 lb) • UV-stabilised, industrial-grade polymer & stainless components • Will not rust, bind, sag or stain • All fasteners included TCHDRND1S3 GATE DIAMETER*
POST DIAMETER*
DISTANCE BETWEEN GATE AND POST (D)
FIXED GATE GAP (E)
35mm (1⅜”)
48–51mm (2”)
67mm (2⅝”)
25mm (1”)
35mm (1⅜”)
60mm (2⅜”)
72mm (2 ⁄16”)
25mm (1”)
35mm (1⅜”)
73mm (2⅞”)
78mm (3¹⁄⁸”)
25mm (1”)
41mm (1⅝”)
48–51mm (2”)
70mm (2¾”)
25mm (1”)
41mm (1⅝”)
60mm (2⅜”)
75mm (3”)
25mm (1”)
41mm (1⅝”)
73mm (2⅞”)
81mm (3¼”)
25mm (1”)
13
TCHDRND2S3 GATE DIAMETER*
POST DIAMETER*
DISTANCE BETWEEN GATE AND POST (D)
FIXED GATE GAP (E)
48–51mm (2”)
48–51mm (2”)
75mm (3”)
25mm (1”)
48–51mm (2”)
73mm (2⅞”)
86mm (3⅜”)
25mm (1”)
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
* Using Round Post adaptors provided If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
1
2
3
4
155lb 70kg
66 lb 30kg
44 lb 20kg
TCHDRND1S3
TCHDRND2S3
Distance from post centers
Distance from post centers
D
D
E
E
(82mm) 7 3 32" (108mm) 1 4 4"
(82mm) 7 3 32"
(73mm) 7 2 8"
(44.5mm) 3 1 4"
(123mm) 27 4 32"
(121mm) 25 4 32"
(83.5mm) 9 3 32"
(79mm) 1 3 8"
(42mm) 21 1 32"
(44.5mm) 3 1 4"
(121mm) 25 4 32"
(42mm) 21 1 32"
TCHDRND1S3
40
1
55 lb 25kg
TCHDRND2S3
SELF-CLOSING HINGES
GATE DIAMETER
POST DIAMETER
D
E
1 3/8" (35mm)
2" (48mm-51mm)
2 5/8" (67mm)
15/16" (24mm)
1 3/8" (35mm)
2 3/8" (60mm)
2 7/8" (72mm)
15/16" (24mm)
GATE DIAMETER
DDTECH.COM 1-7/8"-2" (48mm-51mm) 1-7/8"-2" (48mm-51mm)
POST DIAMETER
D
E
1-7/8"-2" (48mm-51mm)
3" (75mm)
15/16" (24mm)
2 3/8" (60mm)
3 1/8" (80mm)
15/16" (24mm)
Highly adjustable, self-closing hinges for round-post or chainlink gates • 3-way adjustment - vertical, horizontal & tension • Easy alignment legs & adjustment slots • Up to 19mm (¾”) adjustment • For gate gaps from 22-50mm (7⁄8-2”) • Self-closes gates up 25kg (55 lb) • Won’t rust, bind, sag or stain • Industrial-strength polymer with stainless components • UV stabilized, self-lubricating durability
1
2
3
4
CODE
GATE MATERIAL
TCAMA2RND
Chainlink
155lb 70kg
Please Note: Because of the drop shadows,
transparent andVARIANCE PMS colours IDEAL GATE GAPbackgrounds GAP the icons need to be AI files to work in Indesign.
If changes they need to be ( saved 35mm (1 ⅜”) are made22–50mm ⅞”–2”) as AI and EPS and exported as PNG formats for other applications if needed.
66 lb 30kg
44 lb 20kg
Colour Black
55 lb 25kg
[102mm] 4"
Fits [35mm] 1.3/8" up to [41mm] 1.5/8"
Fits fence posts of 1.7/8" – 2", 2.3/8” and 2.7/8” [48–51, 60, 73mm]
Horizontal adjustment [22–50mm] 7/8" to 2”
102mm 4" 40mm 1 9 " 16
[102mm] 4"
96mm 32532"
Fits [35mm] 1.3/8" up to [41mm] 1.5/8"
Fits fence posts of 1.7/8" – 2", 2.3/8” and 2.7/8” [48–51, 60, 73mm]
Horizontal adjustment [22–50mm] 7/8" to 2”
102mm 4" 40mm 1 9
DDTECH.COM "
SELF-CLOSING HINGES
41
Highly adjustable, self-closing hinges for large gate gaps • 3-way adjustment: vertical, horizontal & tension • Up to 19mm (¾”) horizontal adjustment • Fits gate gaps up to 50mm (2”) • UV-stabilized, industrial-strength polymer construction • Internal stainless steel spring and components • Regular models self-close gates up to 25kg (55 lb)
Regular TCAMA2
Regular TCAMA1
CODE
GATE MATERIAL
IDEAL GATE GAP
GAP VARIANCE
Colour
TCAMA1
Metal, Wood, Vinyl
29mm (1⅛”)
22–38mm (⅞”–1½”)
Black
Metal, Wood, Vinyl
35mm (1⅛”)
22–50mm (⅞”–2”)
Black
TCAMA2WT Metal, Wood, Vinyl If changes are made they need to be saved
35mm (1⅛”)
22–50mm (⅞”–2”)
White
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
TCAMA2
Regular TCAMA2WT
as AI and EPS and exported as PNG formats for other applications if needed.
155lb 70kg
66 lb 30kg
44 lb 20kg 23mm 29 32"
23mm 29 32"
GAP HORIZONTALLY ADJUSTABLE
30mm 1 316 "
1
55 lb 25kg GAP HORIZONTALLY ADJUSTABLE
30mm 3 1 " 16
23mm 29 32"
30mm 1 316 "
25mm 31 " 32
25mm 31 " 32
30mm 1 316 "
25mm 31 " 32
GAP HORIZONTALLY ADJUSTABLE
GAP 23mm HORIZONTALLY 29 ADJUSTABLE " 30mm 32 3 1 " 16
2 30mm 1 316 " 30mm 3 1 16 "
25mm 31 " 30mm 32 3 1 " 16
TCAMA1
TCAMA2
86mm 33 " 8 86mm 338"
101mm 31 3 32"
27mm 1 1 16"
40mm 1 9 " 16
101mm 31 3 32" 40mm 1 9 " 16
27mm 11 " 16 96mm 32532" 96mm 32532"
42
3
SELF-CLOSING HINGES
DDTECH.COM
96mm 32532"
96mm 32532"
41
Highly adjustable, heavy duty self-closing hinges for large gate gaps • 3-way adjustment: vertical, horizontal & tension • Up to 50% faster to install with NEW built-in brackets • Quick self-closing adjustment - no special tools required • Self-closes gates up to 70kg (154 lb) • UV stabilised, industrial strength polymer construction • Internal stainless steel spring • Contemporary design for vinyl, composite or wood gates • Removable trim covers & all fasteners included
TCHDMAS3 Horizontal Adjustment up to 11/16” (27mm)
Black
3
24mm 15/16"
22mm 7/8"
155lb 70kg
66 lb 30kg
36mm 1 7/16" 68mm 2 11/16"
56mm 2 3/16"
36mm 1 7/16"
64mm 2 1/2"
22mm 7/8"
24mm 15/16"
27 1 1/16"
54mm 2 1/8"
62mm 256mm 7/16" 2 3/16" 77mm 70mm 3" 2 3/4"
20mm 3/4"
4
70mm 2 3/4"
2
24mm 15/16"
1
as AI and EPS and exported as PNG formats for other applications if needed.
[5 - 43mm] 3/16" - 1 11/16" GATE GAP RANGE
54mm 2 1/8"
[16 - 43mm] 5/8" - 1 11/16" 46 GATE GAP RANGE 170mm 1 13/16" 6 11/16"
68mm 2 11/16"
6mm] 1/4"
mm /16"
DDTECH.COM
54mm 2 1/8"
120mm 4 11/16"
45mm 1 3/4" 54mm 2 1/8"
170mm 6 11/16"
[
6mm] 1/4"
62mm 2 7/16"
[ [5 - 43mm] 3/16" - 1 11/16" GATE GAP RANGE
46 1 13/16"
SELF-CLOSING HINGES
43 mm /16"
24mm 15/16"
36mm 1 7/16"
27 1 1/16"
mm /2"
5–43mm (3/16”–111/16”)
Indesign.
27mm 1 1/16" HORIZONTAL ADJUSTMENT
170mm 6 11/16"
mm /16"
16–43mm (⅝”–1 /16”) 11
Wood 25mm If changes are made they need to be(1”) saved
53mm 2 1/16"
120mm 4 11/16"
TCHDMA2S3
170mm 6 11/16"
27mm 1 1/16" HORIZONTAL ADJUSTMENT
Colour
11
VERTICAL ADJUSTMENT
70mm 77mm 2 3/4" 3"
TCHDMA2S3BT
20mm 3/4"
VERTICAL ADJUSTMENT
77mm 45mm3" 1 3/4"
53mm 2 1/16"
22mm 7/8"
Black White
transparent backgrounds and PMS colours Vinyl, Composite 25mm (1”) the icons need to be AI files to work in
36mm 1 7/16"
27mm 1 1/16" HORIZONTAL ADJUSTMENT
24mm 15/16"
16–43mm (⅝”–1 /16”)
Vinyl, Composite
[16 - 43mm] 5/8" - 1 11/16" GATE GAP RANGE
20mm 3/4"
25mm (1”)
Please Note: Because of the drop shadows,
TCHDMA1S3BT TCHDMA1S3WT
24mm 15/16"
TCHDMA1S3
GAP VARIANCE
VERTICAL ADJUSTMENT
22mm 7/8"
24mm 15/16"
TCHDMAS3
IDEAL GAP
58mm 2 5/16"
20mm 3/4"
56mm 2 3/16"
24mm 15/16"
77mm 3"
27mm 1 1/16" HORIZONTAL ADJUSTMENT
VERTICAL ADJUSTMENT
TCHDMAS3 Wood
GATE MATERIAL
70mm 2 3/4"
CODE
56mm 2 3/16"
Vertical Adjustment up to ¹⁵/16” (24mm)
44 lb 20k
Aluminium and Polymer Hinges Traditionally styled, Aluminium models are tough, powdercoated hinges with stainless-steel closing springs. They are strong and reliable, and ideal for heavier gates. Polymer models won’t rust, bind or sag, and are suited for light-to-medium weight gates around homes and gardens.
44
KWIKFIT® HINGES
DDTECH.COM
Self-Closing, Adjustable Aluminium Hinges
KWIKFIT ® KF3ABL / KF3ABR / KF3AWT MOUNTS TO POST OR WALL
KWIKFIT ® KF3L2BL / KF3L2BR / KF3L2WT TWO SIDE FIXING LEGS FOR ADDED STRENGTH
KWIKFIT ® KF3BL / KF3BR / KF3WT ALIGNMENT RIDGES FOR EASY INSTALLATION
A KWIKFIT ® KF3A1BL / KF3A1BL 1” (25MM) LEAF WIDTH
Economical Polymer Hinges
KWIKFIT ® KF3P/ KF3PWT PLAIN PIVOT
KWIKFIT ® KF3S/ KF3SWT SELF-CLOSING POLYMER
HHHHH ”Why would you go away from a company with a top-notch product? Once it’s installed, it’s installed - there’s no going back six months later having to replace it. You could go for something that may be cheaper, but you’re only going to have issues, callbacks, and complaints. Who needs that?” DONNA - INDEPENDENT STEEL COMPANY
DDTECH.COM
KWIKFIT® HINGES
45
Traditionally styled, self-closing, Aluminium gate hinges
Patented tension adjustment • Adjust tension from both ends - tension adjustment always facing up • 6 tension settings for finer adjustment - suits a range of metal gates • Single-handed tension adjustment - using slot-head screwdriver
Polymer pivot design Low-friction polymer pivot washers provide long life & low maintenance
Side-fixing legs For quick alignment during installation plus added fixing strength
Stainless steel spring Internal torsion spring constructed of stainless steel to prevent binding and staining
Versatile installation Suits left- or right-swinging gates
Gate weight Self-closes gates up to 20kg (44 lb)
3 finishes available Aluminium with powder-coated finish in Black, Bronze or White (KF3A1BLP model only available in black)
Narrower leaf model 1” (25mm) Now 10% smaller in size. Designed to suit smaller post sizes, with a narrower leaf. Only available in black.
KF3A
46
KF3A1BLP
KWIKFIT® HINGES
DDTECH.COM
Aluminium & Polymer General-Purpose Hinges
KF3A1BLP
KF3ABL
KF3
KF3L2
Black (Gloss) Black, White* or Bronze* Black, White* or Bronze* 1” (25mm) leaf width Mounts to post, or wall Alignment ridges for fast Mounts to post, or wall if no post available and easy installation if no post available
PRODUCT CODE KF3
KWIKFIT Aluminium
Alignment ridges, self-closing
KF3L2
2 side fixing legs, self-closing
KF3A
Wall or post mount, self-closing
KF3A1BLP
KWIKFIT POLYMER
Wall or post mount, self-closing
KF3P
No spring, non-self-closing
KF3S
Fixed tension, self-closing
KF3A1BLP/KF3A
KF3S
Black Plain Pivot Hinge
Black Self-Closing Hinge
GATE MATERIAL
IDEAL GATE GAP
MAXIMUM SELF-CLOSING WEIGHT*
HINGE MATERIAL
Colour OPTIONS
Metal
Fixed at 13mm (½”)
20kg/44 lb
Aluminium
Black, Bronze, White
Metal
Fixed at 13mm (½”)
20kg/44 lb
Aluminium
Black, Bronze, White
Metal, Wood, Brick
Fixed at 19mm (¾”)
20kg/44 lb
Aluminium
Black, Bronze, White
Metal, Wood, Brick
Fixed at 21.5mm (⅞”)
20kg/44 lb
Aluminium
Black
Metal, Wood
Fixed at 19mm (¾”)
N/A
Polymer
Black, White
Metal, Wood
Fixed at 19mm (¾”)
20kg/44 lb
Polymer
Black, White
KF3A1/KF3A Post-to-Gate
KF3
Post-to-Gate mount with alignment ridges
KF3L2
Post-to-Gate mount with two side-fixing legs
WALL
Mounts to post, or wall if no post available
KF3P
Black, White* or Bronze* Two side-fixing legs for added strength
*Available in Black, White or Bronze finish. KF3A1BLP only available in black.
DDTECH.COM
KWIKFIT® HINGES
47
Self-Closing, Adjustable Aluminium Hinges • Traditionally styled, self-closing hinges • Aluminium construction with powder-coated finish • Wall- and post-mount models available • Internal stainless steel closing spring • Tension adjustment from either end • Low-friction polymer bushes for smooth closure • Self-closes gates up to 20kg (44 lb) • 25mm (1”) leaf model for narrow frames
CODE
Colour
MODEL/FEATURE
GAP VARIANCE
KF3A1BLP
Black Gloss
Wall/Post mounted
Fixed at 21.5mm (7⁄8”)
KF3ABL
Black Gloss
Wall/Post mounted
Fixed at 19mm (3⁄4”)
KF3ABR
Bronze Satin
Wall/Post mounted
Please shadows, Note: Because of the drop shadows, Fixed at 19mm (3⁄4Note: ”) Because of the dropPlease transparent backgrounds and PMS colours backgrounds and PMS colours transparent
KF3AWT
White Gloss
Wall/Post mounted
Fixed at 19mm (3⁄4”)
KF3BL
Black Gloss
Alignment ridges
for other Fixed at 13mm (½”)applications if needed.for other applications if needed.
KF3BR
Bronze satin
Alignment ridges
White Gloss
3
Fixed at 13mm (½”)
KF3WT
1
Alignment ridges
Fixed at 13mm (½”)
KF3L2BL
Black Gloss
2 side-fixing legs
Fixed at 13mm (½”)
KF3L2BR
Bronze Satin
2 side-fixing legs
Fixed at 13mm (½”)
KF3L2WT
White Gloss
2 side-fixing legs
Fixed at 13mm (½”)
If changes are made they need If tochanges be saved are made they need to be saved as AI and EPS and exported as PNG as AIformats and EPS and exported as PNG formats
155lb 70kg
66 lb 30kg
44 lb 20kg
10.2mm 10.2mm ”) (13
/32
25.4mm (1”) 25.4mm (1”)
KF3 KF3
132mm 132mm (5 1 3 /64”) (5 1 3 /64”)
61mm (2 1 3 /32”) 61mm (2 1 3 /32”) 10mm
20mm 20mm (2 5 /32”) (2 5 /32”)
90mm (3½”) (3½”)
33mm 33mm (15 /16” ) (15 /16” )
( /16 (15/16”)
38mm 1 ”) (138mm /2 (11/2”)
19mm (319mm /4”) (3/4”)
KF3L2 KF3L2
(113mm /2”) (1/2”)
KWIKFIT® HINGES
38mm 38mm (11/2”) (11/2”)
8mm 5 " 8mm 5 " 16 16
38mm 1 ”) (138mm /2 (11/2”) 13mm
38mm 1 ”) (138mm /2 (11/2”)
13mm (113mm /2”) (1/2”)
DDTECH.COM
KF3A • KF3 • KF3L2 KF3A • KF3 • KF3L2
( 5 /4”) ( 5 3 /4”)
25.4mm (1”) 25.4mm (1”)
25.4mm (1”) 25.4mm (1”)
48
90mm
23.5mm 23.5mm 15 ”)
33mm 38mm 5 (133mm / 16”) (1138mm /2”) (15/ 16” ) (11/2”) 19mm 3 ( 19mm /4”) (3/4”)
75mm (3”) 75mm (3”)
146mm 146mm 3
25.4mm (1”) 25.4mm (1”)
33mm 33mm (15/16” ) (15/16” )
25.4mm 25.4mm (1”) (1”)
25.4mm 25.4mm (1”) (1”)
21.5mm
(2721.5mm /32”) (27/32”)
A
KF3A KF3A
33mm 33mm (15/16” ) (15/16” )
25.4mm 21.5mm (1”) 25.4mm (2721.5mm /32”) (1”) (27/32”)
KF3A KF3A
25.4mm 25.4mm (1”) (1”)
75mm 75mm (3”) (3”)
KF3A1BL KF3A1BL
KF3A1BL KF3A1BL A
(25/64”) 10mm (25/64”)
(13/32”)
NOTE: KF3A1BLP (25mm /1” wide leaf) model sold in pairs. All other KwikFit® Aluminium models sold as single hinges. For pairing or kit options, please contact your D&D sales representative.
KF3A1BL KF3A1BL
55 lb 25kg
6.5mm (¼”) 6.5mm (¼”)
4
5.5mm 5.5mm 7 7 32" 32"
2
the icons need to be AI files to work in need to be AI files to work in the icons Indesign. Indesign.
89mm (3½”) 89mm (3½”)
General-Purpose Gate Hinges for light- to mid-weight gates • Economical gate hinges • Industrial-strength polymer construction • Integrated safety cap prevents foothold • Stainless-steel components • Won’t rust, bind, sag or stain • KF3P model for gates up to 55 lb (25kg) • KF3S self-closes gates up to 44 lb (20kg)
KF3S Self-closing, fixed tension CODE
COLOUR
MODEL/FEATURE
GATE GAP
GATE MATERIAL
KF3P
Black
Plain pivot - no spring
Fixed at 19mm (¾”)
Metal, Wood, Vinyl
KF3PWT
White
Plain pivot - no spring
Fixed at 19mm (¾”)
Metal, Wood, Vinyl
Fixed at 19mm (¾”)
Metal, Wood, Vinyl
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
KF3S
Black
Self-closing - fixed tension
KF3SWT
White
Self-closing - fixed tension If changes Metal, Wood, Vinyl are made they need to be saved Fixed at 19mm (¾” )
1/4" 6.2 mm)
1 37/64" (40 mm)
1/4" 6.2 mm)
4 21/64" (110mm)
(
1" (50mm)
4 21/64" (110mm)
(
2 63/64" (76mm)
1 37/64" (40 mm)
as AI and EPS and exported as PNG formats for other applications if needed.
2 49/64" (70.3mm)
2 49/64" (70.3mm)
KwikFit ™ side-fixing legs 31/32" (24.5mm)
offer quick and easy alignment of the hinges on gate and fence post. Double face-fixing (i.e. fixes to both face and side
31/32" (24.5mm)
of post and gate) also adds mounting strength.
2 49/64" (70.3mm)
2 49/64" (70.3mm)
DDTECH.COM
KWIKFIT® HINGES
49
Complete Your Gate Complete your gate installation with a range of accessories designed to prevent gate wear and tear, add functionality, and prolong the life of your latches and hinges. Our range of Gate Stops, Gate Handles and Drop-rods are designed to help open, close or secure pedestrian and driveway gates.
50 50
GATE ACCESSORIES
DDTECH.COM DDTECH.COM
W
W
W
GATE HANDLE ™ FOR METAL/WOOD/VINYL
GATE STOP™ GS3S3 FOR METAL
GATE STOP™ GS1S3 FOR WOOD/VINYL
RF GATE STOP FOR USE WITH HEAVY GATES
Q-BOLT™ PADLOCKABLE DROP BOLT
LOKKBOLT ® LOCKABLE SECURITY DROP-BOLT
W HINGE CAP ® REGULAR OPTIONAL DEVICE W
W HINGE CAP ® HEAVY-DUTY OPTIONAL DEVICE
Available in white
HHHHH “There’s a lot of cheap, nasty products on the market that’s mass-produced overseas. They break easily, sag, and the fixings are difficult to work with. You inevitably have to go back out to site and replace them, which is a frustration for the homeowner as well as for me. This is where D&D stands out, because their products don’t break, and they are all easy to adjust.” NICK - JIM’S FENCING
DDTECH.COM DDTECH.COM
GATE GATE ACCESSORIES ACCESSORIES
51 51
General-Purpose, Ergonomic Gate Handle • Improved ergonomics & styling • Side-fixing legs for quick alignment & added strength • Fits left-or right-hand opening gates • Won’t rust, stain or chip • Industrial-strength polymer construction • Available in Black or White finish • Stainless steel fasteners included
CODE
COLOUR
GATE MATERIAL
LL3GH
Black
Metal, Wood, Vinyl
LL3GHWT
White
Metal, Wood, Vinyl
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign. If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
27mm 1 1 16 "
106mm 4 316 "
156.5mm 6316 "
38mm 1 1 2"
1
31.5mm 1 1 4"
52
GATE ACCESSORIES
DDTECH.COM
Anti Slam & Gate Protection Device • Industrial-strength polymer construction • Includes rubber dampener • Prevents damage to latches & hinges • Greatly reduces gate-slam noise • Two side-fixing legs for added strength • Models for metal, wood or vinyl gates
[130mm] 5 1/8" [130mm] 5 1/8"
[63mm] 2 1/2"
COLOUR Black
GS1S3WT GS3S3
GATE MATERIAL Wood, Vinyl [94mm] 3 11/16"
CODE GS1S3
[94mm] 3 11/16"
[120mm] 4 3/4"
[120mm] 4 3/4"
[63mm] 2 1/2"
White
Wood, Vinyl
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
Black
GS3S3WT
White If changes are made they need to be saved
Metal Metal
as AI and EPS and exported as PNG formats for other applications if needed.
[75mm] 2 15/16" [75mm] 2 15/16" [32mm] 1 1/4"
[21mm] 13/16"
[66mm] 2 5/8"
[66mm] 2 5/8"
[61mm] 2 3/8"
GS1S3
[21mm] 13/16" [21mm] 13/16"
[61mm] 2 3/8"
[32mm] 1 1/4"
[21mm] 13/16"
GS3S3
[130mm] 5 1/8"
CTIVE
PERSPECTIVE
[94mm] 3 11/16"
[120mm] 4 3/4"
[63mm] 2 1/2"
ORTHOGRAPHIC
ORTHOGRAPHIC
2 15/16" DDTECH.COM [75mm]
[61mm] 2 3/8"
GATE ACCESSORIES
53
• 316 marine-grade stainless steel drop-rod • Tough polymer-housing mounting system • 6-pin lock (rekeyable to match door & gate locks) • Retention grooves prevent dropping and dragging • Bolt lengths: 450 & 610mm (18” & 24”) • Fasteners for metal gates included in pack • Optional ‘Base Plate’ retains bolt into ground
KEYABL RE
E
K LOC
6 PIN
Premium, Lockable Security Drop-Bolt
Optional Base Plate LBBPGB
CODE
Colour
GATE MATERIAL
BOLT LENGTH
LB118BX
Black
Metal, Wood, Vinyl
450mm (18”)
LB124BX
Black
Metal, Wood, Vinyl
610mm (24”)
LBBPBG
Black
Optional Base Plate
-
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
4 5/16" 110mm
FOR METAL
1 1/2" 4 5/16" 38mm 110mm
4 5/16" 110mm
4 5/16" 110mm
FOR METAL
1 1/2" 38mm
If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
1
2 3/16" 55mm
2 5
FOR VINYL
24 3/8" 619mm
22 5/8" 575mm
2 5/8" 66mm
4 3/4" 120mm
2 5/8" 66mm 4 3/4" 120mm
3/16" 5mm
BASE PLATE
3/8" 10mm 9/16" 14mm
9/16" 14mm
GATE ACCESSORIES
DDTECH.COM
9/16" 14mm
7/8" 21mm
4 3/4" 120mm 7/8" 21mm
3/16" 5mm
9/16" 14mm
54
3/16" 5mm
2 5/8" 66mm
2 5/8" 66mm
2 5/8" 2 1/16" 66mm 52mm
13/16" 21mm 3/16" 5mm
13/16" 21mm
13/16" 21mm 3/16" 5mm
13/16" 21mm 3/16" 5mm
2 1/16" 52mm
3/8" 10mm
3/8" 10mm
3/16" 5mm
BASE PLATE
3/16" 5mm
3/16" 5mm
3/8" 10mm
16 11/16" 22 5/8" 425mm 575mm
24 183/8" 7/16" 619mm 469mm
16 11/16" 425mm
18 7/16" 469mm
1 1/2" 38mm
FOR VINYL
1 1/2" 38mm
3/16" 5mm
Economical, Padlockable Drop-Bolt • Electro-polished stainless steel & powder-coated • Tough polymer-housing mounting system • High wear and corrosion resistant drop-rod • Padlockable; with padlock storage feature • Retention tabs prevent bolt dropping & dragging • Mounting systems for metal, wood & vinyl • Bolt lengths: 610 & 1020mm (24” & 40”)
116mm 4 1932"
CODE
Colour
GATE MATERIAL
BOLT LENGTH
QB124
Black
Metal
610mm (24”)
QB140
Black
Metal
1020mm (40”)
QB224
Black
Wood, Vinyl
610mm (24”)
QB240
Black
LBBPBG
Black
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign.
Wood, Vinyl
1020mm (40”)
Optional Base Plate If changes are made they need to be saved
–
120mm
4 23 " 32
25mm 31 " 32
617mm 24932"
25mm 31 32"
21mm 27 32"
37mm 1 1532"
120mm 23 4 32"
as AI and EPS and exported as PNG formats for other applications if needed.
49mm 1 15 16 "
14mm 9 " 16
DDTECH.COM
GATE ACCESSORIES
55
Powerful, hydraulic hinge-closers SureClose® Hinges and Hinge-Closers are hydraulic, commercial-grade closing solutions for a range of heavy duty commercial, industrial and residential gates. Made from aircraft-grade aluminium, these devices feature hidden hydraulics in a compact and tamper-resistant design.
56
DDTECH.COM
SURECLOSE ® READYFIT
SURECLOSE ® FLUSH MOUNT
SURECLOSE ® CENTRE MOUNT
SURECLOSE ® CONCEALFIT
SURECLOSE ® EASY
SLIMLINE BY ASSA ABLOY
HHHHH ”Gates tend to settle in the first couple of months after installation and D&D’s SureClose® ReadyFit gate hinges are so easy to adjust, including the soft-closing and snap-closing adjustment. We don’t need to send a crew out to make the adjustment; in just a few minutes the hinge is adjusted to keep the gate alignment perfect.” TREVOR - THOLL FENCE, USA
DDTECH.COM
57
SUREClose
®
Hydraulic Hinge-Closer Selection Guide
FLUSH MOUNT
MODEL
CODE
MODEL
PRODUCT DESCRIPTION
MOUNTING TYPE
FIXING METHOD
74108323T
RF108SF S
Safety Hinge/Closer
External
74108313T
RF108 S
Hinge/Closer
External
74001313T
RFSM S
Hinge Only
74108325T
RF108SF W
74108315T
READYFIT™
FLUSH MOUNT
Centre MOUNT
CONCEALFIT
READYFIT
EASY
SLIMLINE
MAX OPENING ANGLE
SELFCLOSING FROM
Aluminium Screw-on
88º
88º
Aluminium Screw-on
178º
83º
External
Aluminium Screw-on
178º
N/A
Safety Hinge/Closer
External
Steel Weld-on
88º
88º
RF108 W
Hinge/Closer
External
Steel Weld-on
178º
83º
74001315T
RFSM W
Hinge Only
External
Steel Weld-on
178º
N/A
75001213
SMAT90 S
Hinge Only
Flush
Aluminium Screw-on
180º
N/A
75057213M
57AT90 S
Hinge/Closer
Flush
Aluminium Screw-on
180º
85º
75057223M
57SFAT90 S
Hinge/Closer
Flush
Aluminium Screw-on
90º
90º
75108213M
108AT90 S
Hinge/Closer
Flush
Aluminium Screw-on
180º
85º
75108223M
108SF AT90 S
Safety Hinge/Closer
Flush
Aluminium Screw-on
90º
90º
75001214
SMAT90 W
Hinge Only
Flush
Steel Weld-on
180º
N/A
75057214M
57AT90 W
Hinge/Closer
Flush
Steel Weld-on
180º
85º
75057224M
57SF AT90 W
Hinge/Closer
Flush
Steel Weld-on
90º
90º
75108214M
108 AT90 W
Hinge/Closer
Flush
Steel Weld-on
180º
85º
75108224M
108SFAT90 W
Safety Hinge/Closer
Flush
Steel Weld-on
90º
90º
75001113
SM S
Heavy Duty Hinge
Centre
Aluminium Screw-on
90º
N/A
75057113M
57 S
Hinge/Closer
Centre
Aluminium Screw-on
90º
85º
75057123M
57SF S
Hinge/Closer
Centre
Aluminium Screw-on
90º
90º
75108113M
108 S
Safety Hinge/Closer
Centre
Aluminium Screw-on
90º
85º
75108123M
108SF S
Safety Hinge/Closer
Centre
Aluminium Screw-on
90º
90º
75001114
SM W
Heavy Duty Hinge
Centre
Steel Weld-on
90º
N/A
75057114M
57 W
Hinge/Closer
Centre
Steel Weld-on
90º
85º
75057124M
57SF W
Hinge/Closer
Centre
Steel Weld-on
90º
90º
75108114M
108 W
Safety Hinge/Close
Centre
Steel Weld-on
90º
85º
75108124
108SF W
Safety Hinge/Close
Centre
Steel Weld-on
90º
90º
72108423
SC108SF S
Hydraulic Closer
External
Aluminium Screw-on
90º
90º
77108523
SC CF KIT
Door Closer/Hinge Kit
Centre
Aluminium Screw-on
125º
125º
78108513
SC CF HINGE
Plain Pivot Door Hinge
Centre
Aluminium Screw-on
125º
N/A
DC622G-L-9004
CLOSER LEFT
Vertical Gate Closer
External
Screw-on
130º
130º
by ASSA ABLOY DC622G-R-1-9004 CLOSER RIGHT
Vertical Gate Closer
External
Screw-on
130º
130º
CENTRE MOUNT
EASY™ CONCEALFIT™ SLIMLINE
1 1 12 2 23 3 34 4 4
58
SURECLOSE® HINGES
DDTECH.COM
155 70k
Post Mounting Brackets (sold separately)
7511 CENTRE MOUNT
7512 CENTRE MOUNT
HORIZONTAL GAP VARIANCE
MINIMUM POST/DOOR SIZE
FIXING BRACKET CODE
12-35mm (½”–1⅜”)
50mm (2”)
Included
12-35mm (½”–1⅜”)
50mm (2”)
Included
12-35mm (½”–1⅜”)
50mm (2”)
Included
12-35mm (½”–1⅜”)
50mm (2”)
Included
12-35mm (½”–1⅜”)
50mm (2”)
Included
12-35mm (½”–1⅜”)
50mm (2”)
Included
13mm (½”)
50mm (2”)
7515
13mm (½”)
50mm (2”)
7515
13mm (½”)
50mm (2”)
7515
13mm (½”)
76mm (3”)
7515
13mm (½”)
76mm (3”)
7515
13mm (½”)
50mm (2”)
7525
13mm (½”)
50mm (2”)
7525
13mm (½”)
50mm (2”)
7525
13mm (½”)
76mm (3”)
7525
13mm (½”)
76mm (3”)
7525
63-76mm (2½–3”)
64mm (2½”)
7511, 7512
63-76mm (2½–3”)
64mm (2½”)
7511, 7512
63-76mm (2½–3”)
64mm (2½”)
7511, 7512
63-76mm (2½–3”)
76mm (3”)
7511,7 512
63-76mm (2½–3”)
76mm (3”)
7511, 7512
63-76mm (2½–3”)
64mm (2½”)
7526
63-76mm (2½–3”)
64mm (2½”)
7526
63-76mm (2½–3”)
64mm (2½”)
7526
63-76mm (2½–3”)
76mm (3”)
7526
63-76mm (2½–3”)
76mm (3”)
7526
*
51-102mm (2–4”)
50mm (2”)
Included
*
N/A
40mm (19⁄16”)
N/A
N/A
40mm (1 ⁄
N/A
Accommodates gaps from most hinges
50mm (2”)
Included
*
50mm (2”)
Included
*
9 16”)
7525 FLUSH MOUNT
7515 FLUSH MOUNT
7526 CENTRE MOUNT
SELF-CLOSING SELF-CLOSING NON WITH HOLD SAFETY/POOL SELF-CLOSING OPEN
•
*
•
•
*
•
*
•
*
•
*
•
*
•
*
•
*
•
*
• • • •
•
• •
• •
•
• •
•
• • •
•
ADJUSTABLE CLOSING SPEED
FINAL SNAP ACTION
• •
• •
•
•
• • • •
• •
• • • •
• •
• • • •
• •
• • • • • •
• • • •
• •
• •
*Check local pool barrier guidelines for proper installation methods. (SF) = Gate will not hold open at 90° (i.e. OK for safety gates). Do NOT use a hinge with a 90° hold-open feature for pool/child safety gates. In Australia, hinges must be at least 900mm (36”) apart so that they cannot be used as footholds by toddlers. CAUTION: A gate-stop must be installed when using SF models. Gate must not be allowed to open past 90˚. Doing so voids warranty.
DDTECH.COM
SURECLOSE® HINGES
59
External, heavy duty hydraulic hinge-closers • Hidden hydraulics for quiet, controlled closing • Screw-on or weld-on; screws and brackets included • Weld-on models feature proprietary finish – no need to grind off before welding! • For gate gaps of 12–35mm (½”–1⅜”) • Alignment side legs give double face-fixing strength • Final Snap-Close Action in all “108” models • Emergency override feature for safety and longevity • Minimum fence post size 50mm (2”) • Suitable for ADA use NOTE: Warranty conditions vary according to application and usage. See full Warranty details and Limitations on D&D Technologies’ website.
RF SM S 74001313T HINGE ONLY
RF SM W 74001315T HINGE ONLY
RF 108 S / RF 108SF S 74108313T / 74108323T HINGE-CLOSER
RF 108 W / RF 108SF W 74108315T / 74108325T HINGE-CLOSER
7403 RF GATE STOP
SURECLOSE® READYFIT – PLAIN PIVOTING HINGES CODE
DESCRIPTION
SOLD AS
MATERIAL & MOUNTING
MAX. OPENING ANGLE
Configuration for Maximum gate weight 260 lb (120kg)1. Access Control.
74001315T
Plain Pivoting Hinge
Single Hinge
Steel Weld or Screw
178º
74001315T + 74001315T (Not self-closing)
74001313T
Plain Pivoting Hinge
Single Hinge
Aluminium Weld or Screw
178º
74001313T + 74001313T (Not self-closing)
Note: Minimum fence post size 2” (50m). Gap variance for all models ½ to 1⅜” (12–35mm). Do not exceed gap of 1⅜” (35mm) SURECLOSE® READYFIT – SELF-CLOSING HYDRAULIC HINGE/CLOSERS & ACCESSORIES MAX. SELF- REQUIRES Self-closes gates up to Self-closes gates up to OPENING CLOSING GATE180 lb (80Kg) 1 260 lb (120kg) 1 ANGLE FROM STOP
SOLD AS
MATERIAL AND MOUNTING
74108313T 4 Hinge-Closer w/ hold-open
Single
Aluminium Weld or Screw
180º
83º
No
CODE
DESCRIPTION
74108313T + 74001313T 74108313T + 74108313T
74108323T
4
Hinge-Closer – safety model
Single
Aluminium Weld or Screw
88º
88º
Yes
74108315T
4
Hydraulic Hinge-Closer
Single
Steel Weld or Screw
180º
83º
No
74108325T
4
Hinge-Closer – safety model
Single
Steel Weld or Screw
88º
88º
Yes
READYFIT GateStop
Single
Steel Weld or Screw
85º
N/A
N/A
7403
3
74108323T + 74001313T 74108323T + 74108323T 74108315T + 74001315T 74108315T + 74108315T
2
74108325T + 74001315T 74108325T + 74108325T N/A
N/A
1 Based on maximum gate size 1800x1000mm (72”H x 40W). For gates with greater HxW, or if weather conditions such as wind play a role, use hinge combinations with higher self-closing weight ratings. 2 CAUTION: Not suitable child/pool gates unless a gate-stop is installed at a maximum of 170˚opening. DO NOT PROP GATE OPEN. 3 CAUTION: When used on swimming pool gates, always consult local authorities for swimming pool Codes. A gate-stop MUST be installed when using safety models. Gate MUST NOT be allowed to open past 90˚. Doing so voids warranty. 4 MEETS ADA REQUIREMENTS for gate opening and closing angles and self-closing speed.
60
SURECLOSE® HINGES
DDTECH.COM
Gate Function
[86mm] 3 3 8"
[60mm] 23 " 8
Self-closing Speed adjustable
Final snap-close action For electric/coded locks
Non self-closing
[36mm] 13 " 8
[85mm] 338"
[15mm] 5 " 8
[48mm] 1 78" [38mm] 1 1 2"
[6.5mm] 1 " 4 [46mm] 1 34"
[110mm] 438"
READYFIT 108
[60mm] 238"
[19mm] 3 " 4
[38mm] 1 1 2"
[36mm] 1 38"
[36mm] 1 38" [38mm] 1 1 2"
[6.5mm] 1 " 4
[6.5mm] 1 " 4 [46mm] 1 34"
[46mm] 1 34"
[11mm] 3 8"
[60mm] 238"
[15mm] 5 " 8
[48mm] 7 1 8"
[85mm] 338"
[60mm] 238"
[86mm] 338"
[85mm] 3 3 8"
[9.5mm] 3 8"
[15mm] 5 " 8
[75.5mm] 3"
[9.5mm] 3 8"
[75.5mm] 3"
[9.5mm] 3 " 8
READYFIT SM [19mm] 3 " 4
[70mm] 234"
[28mm] 1 1 8"
[40mm] 1 58"
[11mm] 3 8"
[75.5mm] 3" [48mm] 7 1 8"
[75.5mm] 3"
[9.5mm] 3 8"
[19mm] 3 4"
Hold-open Not for safety gates
[28mm] 1 1 8"
DDTECH.COM
[11mm] 3 8"
[28mm] 1 1 8"
SURECLOSE® HINGES
61
FLUSH MOUNT Internally Mounted, Hydraulic Hinge-Closers • Powerful, hidden hydraulics in a compact unit • Prevents gate-slam noise and gate damage • Maintenance-free, with high corrosion resistance • Multiple adjustment options (closing force, speed) • Self-closes gates up to 120kg (260 lb) • Non-self-closing models available • 50-micron anodizing (Aluminium components) • Weld-on models – no need to grind before welding! • Mounting Brackets sold separately (see guide p.59) • Suitable for ADA use
FENCE POST
GATE
Flush Mount swings in or out
SM AT90 S / SM AT90 W 75001213 /75001214 NON-SELF-CLOSING
57 AT90 S / 57 AT90 W 75057213M / 75057214M SELF-CLOSING FROM 85° Holds gate open at 90°
57SF AT90 S / 57SF AT90 W 75057223M / 75057224M SELF-CLOSING FROM 90°
108 AT90 S / 108 AT90 W 75108213M / 75108214M SELF-CLOSING FROM 85° Holds gate open at 90° With Final Snap-Close Action
108SF AT90 / 108SF AT90 W 75108223M / 75108224M SELF-CLOSING FROM 90° With Final Snap-Close Action
CODE*
MODEL
DESCRIPTION
MOUNTING
75001213
SM AT90 S
Non-self-closing Hinge
Aluminium Screw-on
75057213M
57 AT90 S
Hydraulic Hinge Closer
Aluminium Screw-on
75057223M
57SF AT90 S**
Safety Hydraulic Hinge Closer
Aluminium Screw-on
CAUTION: Based on max. gate size 72”H x 40”W (1800x1000mm). For gates with greater HxW, or if weather conditions such as wind play a significant role, use hinge combinations with higher self-closing weight ratings. CAUTION: A gate-stop MUST be installed when using SF models. Gate MUST NOT be allowed to open past 90º. Doing so voids warranty.
75108213M
108 AT90 S
Hinge Closer w/ Final Snap Action
Aluminium Screw-on
HINGE COMBINATIONS
MAX SELF-CLOSING GATE WEIGHT
75108223M 108SF AT90 S** Safety Hinge Closer w/ Final Snap Action Aluminium Screw-on
57 + SM
40kg (90 lb)
75001214
SM AT90 W
Non Self-Closing Hinge
Steel Weld-on
57 + 57
80kg (180 lb)
75057214M
57 AT90 W
Hydraulic Hinge Closer
Steel Weld-on
108 + SM
80kg (180 lb)
Safety Hydraulic Hinge Closer
Steel Weld-on
108 + 108
120kg (260 lb)
Hinge Closer w/ Final Snap Action
Steel Weld-on
ACCESS CONTROL
WEIGHT CAPACITY
Steel Weld-on
SM + SM
120kg (260 lb)
75057224M 57SF AT90 W** 75108214M
108 AT90 W
75108224M 108SF AT90 W** Safety Hinge Closer w/ Final Snap Action
* Warranty conditions vary according to gate or door application and usage. See full Warranty details and limitations on D&D Technologies’ website. Gate mounting brackets included with hinge. Post-mounting brackets sold separately. Fasteners not included. **Use only “SF” model (safety) closers on pool/safety gates. In Australia, hinges must be at least 900mm (36") apart so they cannot be used as footholds by toddlers.
62
SURECLOSE® HINGES
DDTECH.COM
Gate Function
Hold-open Not for safety gates
70mm 234"
55mm 2532"
9mm 3 " 8
6mm 1 4 "
Sold as a single hinge 77.5mm 31 16 "
6mm 1 " 4
6mm 1 " 4
M37 x 1.5
103mm 41 16 "
9mm 3 8"
18mm 23 " 32
108 AT90 S
Final snap-close action For electric/coded locks
62mm 2716 "
SM AT90 S 57 AT90 S
Self-closing Speed adjustable
18mm 23 " 32
M37 x 1.5
119mm 4 11 16 "
6mm 1 " 4
55mm 2532"
70mm 234"
DDTECH.COM
SURECLOSE® HINGES
63
CENTRE MOUNT Internally mounted, hydraulic, hinge-Closers
GATE
• Maintenance-free, with high corrosion resistance • Screw-on or weld-on models available • Multiple adjustment options (closing force, speed) • Self-closes gates up to 120kg (260 lb) • Non-self-closing models available • Prevents gate slam noise & gate damage • 50-micron anodizing (Aluminium components) • Proprietary finish – no need to grind before welding! • Mounting Brackets sold separately (see guide p.59) • Suitable for ADA use
FENCE POST
Centre Mount swings in & out
SM S / SM W 75001113 / 75001114 NON-SELF-CLOSING
57 S / 57W 75057113M / 75057114M SELF-CLOSING FROM 85° Holds gate open at 90°
57SF S / 57SF W** 75057123M / 75057124M SELF-CLOSING FROM 90°
108 S / 108 W 75108113M / 75108114M SELF-CLOSING FROM 85° Holds gate open at 90° With Final Snap-Close action
108 SF S / 108SF W 75108123M / 75108124M SELF-CLOSING FROM 90° With Final Snap-Close action
CODE*
MODEL
DESCRIPTION
MOUNTING
75001113
SM S
Non Self-Closing Hinge
Aluminium Screw-on
75057113M
57 S
Hinge Closer
Aluminium Screw-on
Safety Hinge Closer
Aluminium Screw-on
CAUTION: Based on max. gate size 72”H x 40”W (1800x1000mm). For gates with greater HxW, or if weather conditions such as wind play a significant role, use hinge combinations with higher self-closing weight ratings. CAUTION: A gate-stop MUST be installed when using SF models. Gate MUST NOT be allowed to open past 90º. Doing so voids warranty.
Hinge Closer w/ Final Snap Action
Aluminium Screw-on
HINGE COMBINATIONS
MAX SELF-CLOSING GATE WEIGHT
Aluminium Screw-on
57 + SM
40kg (90 lb)
75057123M 57SF S** 75108113M
108 S
75108123M 108SF S** Safety Hinge Closer w/ Final Snap Action 75001114
SM W
Non Self-Closing Hinge
Steel Weld-on
57 + 57
80kg (180 lb)
75057114M
57 W
Hinge Closer
Steel Weld-on
108 + SM
80kg (180 lb)
Safety Hinge Closer
Steel Weld-on
108 + 108
120kg (260 lb)
Hinge Closer w/ Final Snap Action
Steel Weld-on
ACCESS CONTROL
WEIGHT CAPACITY
Steel Weld-on
SM + SM
120kg (260 lb)
75057124M 57SF W** 75108114M
108 W
75108124M 108SF W** Safety Hinge Closer w/ Final Snap Action
* Warranty conditions vary according to gate or door application and usage. See full Warranty details and limitations on D&D Technologies’ website. Gate mounting brackets included with hinge. Post-mounting brackets sold separately. Fasteners not included. **Use only “SF” model (safety) closers on pool/safety gates. In Australia, hinges must be at least 900mm (36") apart so they cannot be used as footholds by toddlers.
64
SURECLOSE® HINGES
DDTECH.COM
Gate Function
Hold-open Not for safety gates
SELF-CLOSING - NON SAFETY
Center Mount Brackets Models
Bracket Material
Not suitable for child/pool safety
75108114M Steel 75108113M Aluminum
Center Mount Brackets Models
Bracket Material
75108124M Steel 75108123M Aluminum
FENCE
Center Mount: Center of gate and post are aligned.
Final snap-close action For electric/coded locks
SELF-CLOSING - SAFETY (SF model)
Suitable for child/pool safety* DO NOT PROP GATE OPEN Center Mount: Center of gate and post are aligned.
FENCE
GATE
Use post bracket: 7526 Steel 7511 Aluminum 7512 Aluminum 7514 Aluminum
GATE GATE
Use post bracket: 7526 Steel 7511 Aluminum 7512 Aluminum 7514 Aluminum
CAUTION: When used on swimming pool gates, always consult local authorities for swimming pool Codes. A gate-stop MUST be installed when using SF models. Gate MUST NOT be allowed to open past 90˚. Doing so voids warranty.
Center Mount Brackets Models
Self-closing Speed adjustable
SELF-CLOSING - NON SAFETY
Bracket Material
Not suitable for child/pool safety
75057114M Steel 75057113M Aluminum
Center Mount Brackets Models
Bracket Material
75057124M Steel 75057123M Aluminum
Suitable for child/pool safety* DO NOT PROP GATE OPEN Center Mount: Center of gate and post are aligned.
FENCE FENCE
SELF-CLOSING - SAFETY (SF model)
GATE GATE
G AT E
Use post bracket: 7526 Steel 7511 Aluminum 7512 Aluminum 7514 Aluminum
Center Mount: Center of gate and post are aligned.
Use post bracket: 7526 Steel 7511 Aluminum 7512 Aluminum 7514 Aluminum
CAUTION: When used on swimming pool gates, always consult local authorities for swimming pool Codes. A gate-stop MUST be installed when using SF models. Gate MUST NOT be allowed to open past 90˚. Doing so voids warranty.
SM S & 57 S & 57SF S 6.4mm 1 4"
28mm 1 332"
14mm 9 16 "
55mm 2532"
38mm 1 1 2"
M37 x 1.5
19mm 3 " 4
27mm 1 1 16 "
90mm 317 32"
28mm 1 332"
38mm 11 " 2
14mm 9 16 "
M37 x 1.5
19mm 3 " 4
27mm 1 1 16 "
55mm 2532"
108 S & 108SF S
131.5mm 5316 "
DDTECH.COM
SURECLOSE® HINGES
65
Hydraulic, Gate Closer for Centre-Hinge Mounted Gates
1³⁄¹⁶“- 1⅞” (30-48mm)
• Add-on hydraulic closer - mounts to top of gate • Adjustable self-closing speed & final snap action • Can be used with most Centre-mounted hinges • Self-closes gates up to 80kg (180 lb) • Horizontally adjusts: up to 100mm (4”) gate gaps • Opens to, and self-closes from, 90˚(no hold-open) • Maintenance-free: never need to add fluid • High corrosion resistance - 50-micron anodizing • Includes gate and post mounting brackets • Suitable for ADA use
Hinge pivot point and gate gap must fall within this range
2”–4” (50-100mm)
SureClose® EASY closer seen on gate with a ShutIt® weld-on hinge CODE*
MODEL
DESCRIPTION
72108423
SC 108SF S**
Gate Closer – Aluminium Brackets
Models
Bracket Material
72108423
Aluminum
SELF-CLOSING - SAFETY (SF Model) Suitable for child/pool safety* DO NOT PROP GATE OPEN
GATE
EASY – Closer
FENCE POST
Gate Function
Mounting Brackets & Fasteners included
Center Mounted: Center of gate and post are aligned. Gate opens 90º inwards and outwards from center point.
CAUTION: When used on swimming pool gates, always consult local authorities for swimming pool Codes. A gate-stop must be installed when using SF models. Gate MUST NOT be allowed to open past 90˚. Doing so voids warranty.
Self-closing Speed adjustable
Final snap-close action For electric/coded locks
GATE WIDTH
MAX SELF-CLOSING GATE WEIGHT
40” (1000mm) wide
80kg (176 lb)
48” (1200mm) wide
60kg (132 lb)
CAUTION: Based on max. gate width 1000mm (40”W) and 1200mm (48”W). For gates with greater W, or if weather conditions such as wind play a significant role, use a different model of SureClose® hinge + closer combination with higher self-closing weight ratings. CAUTION: A gate-stop MUST be installed when using SF models. Gate MUST NOT be allowed to open past 90º. Doing so voids warranty. *All EASY closers include fasteners, gate and post mounting brackets.
* Warranty conditions vary according to gate or door application and usage. See full Warranty details and limitations on D&D Technologies’ website. All EASY closers include fasteners, gate and post mounting brackets. **Yes (SF) = Gate will not hold open at 90° (OK for safety gates). Do NOT use a hinge with a 90° hold-open feature (-) for pool/child safety gates.
66
[55mm] [55mm] 21 " 21 8" 8
GATE
SURECLOSE® HINGES
DDTECH.COM
[30 - 48mm] [303- 48mm] "- 17 " 1 13 16"- 17 8" 8 16 [50 - 200mm] 2" - 4" [50 - 200mm] 2" - 4"
1 [83mm] 3 14" [83mm] 3 4"
[67mm] [67mm] "5 25 2 8 8"
FENCE
[50mm] 115 " [50mm] 16 115 " 16
World’s only concealed Door or Gate Closer & Hinge all-in-one • Powerful, hidden hydraulics (no need to add fluid)
1-1/4 7/16" 7/16" • Easily adjust speed valves (31.8mm) (11mm) self-closing/latching (11mm)
1-1/4" (31.8mm)
5-29/ 32" (150mm)
• Engineered for burglary resistance and clean design • Easily installed internally – within the door or frame 1-7/32" 2-15/64" • Decorative dress covers included (31mm) (56.6mm) • Tested to over 500,000 open-close cycles • Suitable for ADA applications, certified DDA use • 20-minute UL10C & cUL10C fire rating (Intertek W/N 22217) • Quietly, self-closes doors up to 220 lbs (100kg)
1
77108523 CLOSER + HINGE
STRONG, SELF-CLOSING Product Code Description Hydraulic Closer With a Plain Hinge PERFORMANCE 77108523 WALL
7/16" (11mm)
WALL
2-47/64" (69.5mm) 1-5/32" 29.5mm)
5ø
Latch Zone Sweep Zone
* CAUTION: A floor-mounted DOOR STOP is required to prevent a door/gate opening beyond 125o (see above diagram). Forcing a door/gate beyond a 125o opening may damage closer and door/gate frame. Failure to install a Door Stop where required may void Warranty.
ONE PAIR, CLOSER + HINGE COMBINATION
(
2-1/8" (54mm) 5-1/32" (127.6mm)
12
DOOR STOP
10-1/32" (255mm)
1-7/32" (31mm)
DOOR/GATE 12 ø
4-31/64"(114mm)
5-29/ 32" (150mm)
7/16" (11mm)
155lb 1 70kg
Gate/Door Function
78108513 PLAIN PIVOT HINGE
ADJUSTABLE 1/16" - 1/4"(2mm - 6mm)
1-1/4" (31.8mm)
1 12 12 2 3 23 43 34 4 4
MAX ADJUSTABLE FINAL DOOR CLOSING SNAP-CLOSE OPENING SPEED ACTION
CODE
MODEL
77108523
Kit– Hinge/Closer + Hinge Only
125º
Yes
78108513
Hinge (Single Unit)
125º
No
Maximum Door/Gate Weight
100kg (220 lbs)
Maximum Door/Gate Width
1220mm (48”)
Minimum Door/Gate Thickness
40mm (1⅝”)
Maximum Opening Angle
125º
Final snap-close action
12º–0º
VERTICAL (DOOR HEIGHT) ADJUSTABILITY
DEPTH & INCLINATION ADJUSTABILITY
MAX. SELF-CLOSING WEIGHT
Yes (12º–0º)
+/- 2mm (5⁄64”)
2–6mm (5⁄64”–1⁄4”)
100kg (220 lb)
No
+/- 2mm (5 64 )
⁄ ”
2–6mm (5 64 –1 4 )
⁄ ” ⁄”
N/A
7801
Drill Jig for timber doors
Constructed from hardened steel with black phosphate coating
77108551
Weld box kit for Aluminium
Concealed weld boxes for sleek, secure installations. Aluminium contains 7813S, 78126, 7811S
7710855
Weld box kit for Steel
Concealed weld boxes for sleek, secure installations. Steel contains 7823S, 78226, 7821S
Door reinforcement hardware available for hollow-core doors. Weld boxes available for metal gates. Routing templates and drill jig available for wood doors and frames.
DDTECH.COM
SURECLOSE® HINGES
67
SLIMLine By ASSA ABLOY Hydraulic, Vertical Gate Closer for residential or commercial gates • 14 Versatile Installation Options • Mount on posts or walls • Mount on gates internally or externally • Left- and right-hand opening models available • Flexible Compatibility – • Install with face or Centre mounted hinges • Easy opening – innovative Cam-Motion® Technology* • Self-closes gates up to 150kg (330 lbs) • Retrofit – Ideal for single gates with existing hinges • Easy to install – No welding required • Adjustable – Closing and latch speeds can be altered • Tested Performance – For endurance and climate
5 AC632 (Optional)
*The force of 3D Cam-Motion Technology ensures gates are light to open but strong enough to close.
1
Mounting Plate for Guide Rail DCAC632-9004 CODE
DC622G
PRODUCT NAME
FINISH
MAX GATE MAX GATE WEIGHT WIDTH
Matte Black
150kg (330 lbs)
DC622G-L-1-9004
Vertical Gate Closer Left Hand*
DC622G-R-1-9004
Vertical Gate Closer Right Hand*
DCAC632-9004
Mounting Plate for Guide rail
1300mm (51")
MAX OPENING ANGLE 130º
*Hinges used may limit max opening angle
Required to mount to fence pickets
[651mm] 25 5/8” Mounting Bracket Kit for Body
[20.5mm] 1 ³/16”
[22mm] 7 /8 ”
Mounting Bracket Kit for Body DCAC633-9004 [30.5 mm] 1 ³/16”
622G
Use when installing the closer on DCAC633-9004 push side posts and on pull side walls [304mm] 12” GATE GAP: hinges [32mm] [284mm] 11³/16”The SlimLine will accommodate any gate gap that results from commonly used [34mm] 1 1/4” 1 ¹¹/32”
[651mm] 25 5/8”
[304mm] 12”
³/16” 1
Independent adjustment via side-facing valves
[394mm] 15 ½”
[352mm] 13 7/8”
[34mm] 1 ¹¹/32”
[50mm] 1 15/16”
[394mm] 15 ½”
[32mm] 1 1/4”
[34mm] 1 ¹¹/32”
[352mm] 7 /8” 13[20.5mm]
[30.5 mm] 1 ³/16”
[22mm] 7 /8 ”
[284mm] 11³/16”
[52mm] 2 1/16”
130° 20°
20° 0°
[34mm] 1 ¹¹/32”
dependent adjustment via side-facing valves Latch speed (L) Closing speed (C)
20°
68130°
SURECLOSE® HINGES 20°
[50mm] 1 15/16”
DDTECH.COM
[52mm] 2 1/16”
14 Versatile Mounting Options Mounting Bracket Kit for (DCAC633-9004) must be used when installing the closer on push side posts or pull side walls. Mounting Plate for Guide Rail (DCAC632-9004) must be installed when closer is mounted on fence pickets. Post - Pull side 1
2
Product DC622G-L-9004 Code
3
DC622G-R-9004
4
DC622G-L-9004 DCAC632-9004
DC622G-R-9004 DCAC632-9004
Post - Push side 5
Product Code
6
DC622G-R-9004 DCAC633-9004
7
DC622G-L-9004 DCAC633-9004
DC622G-R-9004 DCAC633-9004 DCAC632-9004
Wall - Push side 9
10
Product DC622G-R-9004 Code
11
DC622G-L-9004
Wall - Pull side 13
Product Code
DC622G-L-9004 DCAC633-9004 DCAC632-9004 12
DC622G-R-9004 DCA632-9004
DC622G-L-9004 DCA632-9004
Feel the difference with Cam-Motion® Technology
14
DC622G-L-9004 DCA633-9004
8
DC622G-R-9004 DCA633-9004
The DC622G Gate Closer, powered by 3D Cam-Motion® Technology, brings high-end performance to pedestrian and security gates. It enables less effort to open the gate, ensuring comfortable operation and barrier-free access, then shuts the gate tight, without force. Unlike traditional gate-closing technology, 3D Cam-Motion® does the heavy lifting, so your customers don’t have to, delivering smoother gate operation than traditional rack-and-pinion closers. No hard pushing or pulling — just easy, natural movement that’s elbow-friendly and ideal for kids, seniors, and anyone with limited mobility.
DDTECH.COM
SURECLOSE® HINGES
69
SHUTIt
BADASS™
Industrial strength hinges ShutIt® Industrial Metal Gate Hinges are some of the toughest in the world. ShutIt BadAss™ hinges feature precision, CNC-machined components, near-frictionless movement and dual sealed bearings.
70
SHUTIT® HINGES
DDTECH.COM
Bolt-on Hinges
ShutIt ® ROUND BOLT-ON HINGE
ShutIt ® FACE MOUNT BOLT-ON HINGE
ShutIt ® FACE MOUNT BOLT-ON BLACK HINGE
Weld-on Hinges
ShutIt ® FACE MOUNT WELD-ON HINGE
ShutIt ® VERSA WELD WELD-ON HINGE
Self-closing, Hinge-closers
ShutIt ® CENTRE MOUNT SELF-CLOSING ROUND POST
ShutIt ® FACEMOUNT SELF-CLOSING SET
HHHHH ”The adjustability of ShutIt® hinges provides the versatility needed to adapt to a project requirement change and make installations quick and easy. With the ShutIt® hinge we have the ability to kick up or tilt a gate, shrink an opening and no cutting of the gate is required. It makes for a safer installation. They’re the best.” RUSTIN - H&R OPERATORS SERVICES, INC.
DDTECH.COM
SHUTIT® HINGES
71
BOLT-ON BADASS™ RANGE CODE
PRODUCT DESCRIPTION
**GAP VARIANCE
FINISH
BEARINGS
MAX GATE WEIGHT
YOKE MATERIAL
BODY MATERIAL
HINGE HEIGHT
CI3750
Baby Bolt-on
76-89mm (3”–31⁄2”)
Zinc Electroplated
1
140kg (300 lb)
Steel
Steel
102mm (4”)
CI3750B
Powder coat Baby Bolt-on
76-89mm (3”–31⁄2”)
Matt Black
1
140kg (300 lb)
Steel
Steel
102mm (4”)
CI3770
Half Bolt-on
67-80mm (23⁄4”–31⁄8”)
Zinc Electroplated
2
450kg (1,000 lb)
Steel
Steel
191mm (71⁄2”)
CI3780
Steel/Aluminium Half Bolt-On
67-80mm (23⁄4”–31⁄8”)
Zinc Electroplated /Unfinished
2
270kg (600 lb)
Steel
Alum
191mm (71⁄2”)
CI3700
Bolt-on
74-86mm (27⁄8”–33⁄8”)
Zinc Electroplated
2
450kg (1,000 lb)
Steel
Steel
191mm (71⁄2”)
CI3700B
Powder coat Bolt-on
74-86mm (27⁄8”–33⁄8”)
Matt Black
2
450kg (1,000 lb)
Steel
Steel
191mm (71⁄2”)
CI3720
Face Mount Bolt-on
13-25mm (1⁄2”–1”)
Zinc Electroplated
2
450kg (1,000 lb)
Steel
Steel
191mm (71⁄2”)
CI3720B
Powder coat Face Mount Bolt-on
13-25mm (1⁄2”–1”)
Matt Black
2
450kg (1,000 lb)
Steel
Steel
191mm (71⁄2”)
CI3740A
4” (102mm) Aluminium Half Bolt-on
73-86 mm (3 ¼” - 3 ¾”)
Unfinished
2
270kg (600 lb)
Alum
Alum
152mm (6”)
CI3740
4” (102mm) Combo Steel/Alum Half Bolt-on
73-86 mm (3 ¼” - 3 ¾”)
Zinc Electroplated /Unfinished
2
270kg (600 lb)
Steel
Alum
152mm (6”)
CI3760A
6” (152mm) Aluminium Body Half Bolt-on
73-86 mm (3 ¼” - 3 ¾”)
Unfinished
2
270kg (600 lb)
Alum
Alum
152mm (6”)
CI3950
Barrel Hinge – Bolt or weld-on
Fixed at 13mm (1⁄2”)
Zinc Electroplated
4
680kg (1,500 lb)
Steel
Steel
152mm (6”)
CI2051
4” (102mm) Round Bolt-on
70-81mm (23⁄4”–33⁄16”)
Zinc Electroplated
2
450kg (1,000 lb)
Steel
Steel
191mm (71⁄2”)
CI2053
6” (152mm) Round Bolt-on
70-81mm (23⁄4”–33⁄16”)
Zinc Electroplated
2
450kg (1,000 lb)
Steel
Steel
191mm (71⁄2”)
CI2054
8” (203mm) Round Bolt-on
70-81mm (23⁄4”–33⁄16”)
Zinc Electroplated
2
450kg (1,000 lb)
Steel
Steel
191mm (71⁄2”)
MAX SC GATE YOKE BODY WEIGHT MATERIAL MATERIAL
HINGE HEIGHT
SELF-CLOSING BADASS™ RANGE (SC) CODE
PRODUCT DESCRIPTION
**GAP VARIANCE
FINISH
BEARINGS
CI3825
Hinge/Closer, Centre Mount, Weld-on
64-76mm (21⁄2”–3”)
Zinc Electroplated
3
*200kg (440 lb)
Steel
Steel
127mm (5”)
CI3850
Set – Closer + Hinge, Centre Mount, Weld-on
64-76mm (21⁄2”–3”)
Zinc Electroplated
3/2
140kg (308 lb)
Steel
Steel
127/97mm (5”/33⁄4”)
CI3825R
Hinge/Closer, Centre Mount, Round Yoke
61-74mm (23⁄8”–27⁄8”)
Zinc Electroplated
3
*200kg (440 lb)
Steel
Steel
191mm (71⁄2”)
CI3850R
Set – Closer + Hinge, Centre Mount, Weld-on
61-74mm (23⁄8”–27⁄8”)
Zinc Electroplated
3/2
140kg (308 lb)
Steel
Steel
191/97mm (71⁄2”/ 33⁄4”)
CI3825FM
Hinge/Closer, 180º Face Mount, Weld-On
13-25mm (1⁄2”–1”)
Zinc Electroplated
3
*200kg (440 lb)
Steel
Steel
152mm (6”)
13-25mm (1⁄2”–1”)
Zinc Electroplated
3/2
140kg (308 lb)
Steel
Steel
191/152mm (71⁄2”/ 6”)
CI3850FM Set – Closer + Hinge, 180º Face Mount, Weld-on CI3835
Hinge/Closer, Centre-Mount, Bolt-On
74-86mm (27⁄8”–33⁄8”)
Zinc Electroplated
3
*200kg (440 lb)
Steel
Steel
220mm (8 2/3”)
CI3860
Set – Closer + Hinge, Centre-Mount, Bolt-On
74-86mm (27⁄8”–33⁄8”)
Zinc Electroplated
3/2
140kg (308 lb)
Steel
Steel
220/191mm (8 2/3”/ 71⁄2”)
CI3835FM
Hinge/Closer, 180º Face Mount, Bolt-On
13-25mm (1⁄2”–1”)
Zinc Electroplated
3
*200kg (440 lb)
Steel
Steel
220mm (8 2/3”)
CI3860FM
Set – Closer + Hinge, 180º Face Mount, Bolt-On
13-25mm (1⁄2”–1”)
Zinc Electroplated
3/2
140kg (308 lb)
Steel
Steel
220/191mm (8 2/3”/ 71⁄2”)
* Max self-closing weight of 200kg is with 2 closers mounted to gate frame † † Set comes with one self-closing hinge plus one CI3000.
72
SHUTIT® HINGES
DDTECH.COM
CI3600 BABY
CI3620 RUSTED BABY
CI3670 COMBO BABY
CI3650 ALUMINIUM BABY
CI3000 ORIGINAL
CI3100 RUSTED ORIGINAL
CI3200 COMBO ALUM/STEEL BODY
CI3300 COMBO STEEL/ALUM BODY
CI3000R CENTRE MOUNT ROUND PIVOT HINGE (PAIR)
CI3400 ALUMINIUM
CI3075 VERSAWELD™
CI3500 HEAVY DUTY
CI3050 FACE MOUNT WELD-ON
CI3520 100 YEAR
CI3800 STAINLESS STEEL
CI3900 6" (152mm) STRAP HINGE
CI3925 10" (254mm) STRAP HINGE
WELD-ON BADASS™ RANGE CODE
PRODUCT DESCRIPTION
**GAP VARIANCE
FINISH
BEARINGS
MAX GATE WEIGHT
YOKE MATERIAL
BODY MATERIAL
HINGE HEIGHT
CI3600
Baby Steel to Steel
64-76mm (21⁄2”–3”)
Zinc Electroplated
1
140kg (300 lb)
Steel
Steel
33mm (13⁄8”)
CI3620
Baby BadAss™ Rusted
64-76mm (21⁄2”–3”)
Unfinished
1
140kg (300 lb)
Steel
Steel
33mm (13⁄8”)
CI3650
Baby Aluminium to Aluminium
64-76mm (21⁄2”–3”)
Unfinished
1
140kg (300 lb)
Alum
Alum
33mm (13⁄8”)
CI3670
Baby Steel/Aluminium Combo
64-76mm (21⁄2”–3”)
Zinc Electroplated /Unfinished
1
140kg (300 lb)
Steel
Alum
33mm (13⁄8”)
CI3200
Alum/Steel Combo
61-74mm (23⁄8”–27⁄8”)
Unfinished/ Zinc Electroplated
2
270kg (600 lb)
Alum
Steel
97mm (33⁄4”)
CI3300
Steel/Alum Combo
61-74mm (23⁄8”–27⁄8”)
Zinc Electroplated /Unfinished
2
270kg (600 lb)
Steel
Alum
97mm (33⁄4”)
CI3400
Aluminium
61-74mm (23⁄8”–27⁄8”)
Unfinished
2
270kg (600 lb)
Alum
Alum
97mm (33⁄4”)
CI3800
Stainless Steel †
61-74mm (23⁄8”–27⁄8”)
304 Stainless
2
450kg (1,000 lb)
Stainless
Stainless
97mm (33⁄4”)
CI3000
The Original
61-74mm (23⁄8”–27⁄8”)
Zinc Electroplated
2
450kg (1,000 lb)
Steel
Steel
97mm (33⁄4”)
CI3100
Original BadAss™ Rusted
61-74mm (23⁄8”–27⁄8”)
Unfinished
2
450kg (1,000 lb)
Steel
Steel
97mm (33⁄4”)
CI3000R
Centre Mount, Round Pivot Hinge (Pair)
61-74mm (23⁄8”–27⁄8”)
Zinc Electroplated
2/2
450kg (1,000 lb)
Steel
Steel
97mm (33⁄4”)
CI3500
Heavy Duty
61-74mm (23⁄8”–27⁄8”)
Zinc Electroplated
3
680kg (1,500 lb)
Steel
Steel
97mm (33⁄4”)
CI3520
100 Year
64-76mm (21⁄2”–3”)
Zinc Electroplated
3
680kg (1,500 lb)
Steel
Steel
104mm (41⁄8”)
CI3075
VersaWeld™
Fixed Zinc Electroplated 70mm (23⁄4”)
2
450kg (1,000 lb)
Steel
Steel
95mm (33⁄4”)
CI3050
Face Mount Weld-on
13-25mm (1⁄2”–1”)
Zinc Electroplated
2
450kg (1,000 lb)
Steel
Steel
98mm (37⁄8”)
CI3900
152mm (6”) Strap Hinge
Fixed 13mm (1⁄2”)
Zinc Electroplated
4
680kg (1,500 lb)
Steel
Steel
150mm (6”)
CI3925
254mm (10”) Strap Hinge
Fixed 13mm (1⁄2”)
Zinc Electroplated
4
680kg (1,500 lb)
Steel
Steel
150mm (6”)
CI3975
Uphill Strap Hinge Set Includes 1x CI3900 + 1x CI3925
Fixed 13mm (1⁄2”)
Zinc Electroplated
4/4
680kg (1,500 lb)
Steel
Steel
150mm (6”)
2
3
**Adjustable yoke for perfect installations. † All components, including the sealed bearings, are stainless steel. All weight ratings are based upon two hinges.
1
ADA Standards 404.2.8.2 Spring Hinges. Door and gate spring hinges shall be adjusted so that, from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum.
DDTECH.COM
SHUTIT® HINGES
73
4
Bolt-On Range CODE
FINISH
FIXING
GAP BRACKET VARIANCE
BODY
HEIGHT WEIGHT INCH/MM LB/KG
CI3750
Zinc
Bolt-On
76-89mm (3”–31⁄2”)
Steel
Steel
102mm (4”)
1kg (2 lb)
CI3750B Matt Black Bolt-On
76-89mm (3”–31⁄2”)
Steel
Steel
102mm (4”)
1kg (2 lb)
Baby Bolt-on – Steel to Steel • Suits metal residential or small commercial gates • One sealed maintenance-free bearing • Horizontally adjustable for precise installations • Flat, bolt-on brackets for through-bolting • Maximum gate weight: 140kg (300 lb)
.54” (14mm) 2 PL
.54” (14mm) 2 PL
.9” (23mm)
2
3
1
4
2
155lb 70kg
4” (102mm) 2.75” (70mm)
3
66 lb 30kg
44 lb 20kg 1.3” (33mm)
4
155lb 70kg
2.75” (70mm)
66 lb 30kg
.25” (6mm)
.75” (19mm)
• Designed to bolt on to an end post • Two sealed maintenance-free bearings • Horizontally adjustable for precise installations • Flat, bolt-on brackets for through-bolting • CI3770 Maximum gate weight: 450kg (1000 lb) • CI3780 Maximum gate weight: 270kg (600 lb)
1
2
3
4
FINISH
FIXING
CI3770
Zinc
Bolt-On / Weld
(23⁄4”–31⁄8”)
CI3780
Zinc
Bolt-On / Weld
(23⁄4”–31⁄8”)
155lb 70kg
2
3
BRACKET
BODY
Steel
Steel
Steel
Aluminium
67-80mm 67-80mm
3 TO 3.5” 55 lb(76-89mm) 25kg(ADJUSTABLE)
HEIGHT INCH/MM
WEIGHT LB/KG
191mm
1.1kg (2.5 lb)
191mm
1.1kg (2.4 lb)
(71⁄2”) (71⁄2”)
.625” (16mm) 2 PL
66 lb 30kg
1.7” (43mm)
1
GAP VARIANCE
CODE
1.5” (38mm)
44 lb 20kg
.75” (19mm) 1.5” (38mm)
.25(6mm)
1.5” (38mm)
CI3770 Half Bolt-on – Steel to Steel CI3780 Half Bolt-on – Steel to Aluminium
55 lb 4” 25(102mm) kg
1.8” (46mm)
1
1.4 TO 1.9” (36-48mm) (ADJUSTABLE)
1.6” (41mm) (FIXED)
.9” (23mm)
44 lb 20kg 1.5” (38mm)
4
2.4” (61mm)
55 lb 25kg
3.8” (97mm)
155lb 70kg
66 lb 30kg
5.4” 7.5” (137mm) (191mm)
1.25” (32mm) 2.8” (71mm)
44 lb 20kg
55 lb 25kg
2.4” (61mm)
.25” (6mm) 1.5” (38mm)
1.3 TO 1.8” (33-46mm) (ADJUSTABLE)
Bolt-on – Steel to Steel
CODE
FINISH
FIXING
• Designed to bolt on to an end post CI3700 Zinc Bolt-On • Two sealed maintenance-free bearings • Horizontally adjustable for precise installations CI3700B Matt Black Bolt-On • Flat, bolt-on brackets for through-bolting .625” (16mm) • Maximum gate weight: 450kg (1000 lb) 2 PL
1
2
3
4
1
155lb 70kg
2
7.5” (191mm)
3
5.4” (137mm)
4
66 lb 30kg
1.7” (43mm)
1.1” (28mm)
2.7 TO 3.1” (69-79mm) (ADJUSTABLE)
GAP BRACKET VARIANCE
BODY
HEIGHT WEIGHT INCH/MM LB/KG
74-86mm (27⁄8”–33⁄8”)
Steel
Steel
191mm (71⁄2”)
1.6kg (3.5 lb)
74-86mm (27⁄8”–33⁄8”)
Steel
Steel
191mm (71⁄2”)
1.6kg (3.5 lb)
.625” (16mm) 2 PL
44 lb 20kg
155lb 3.8” 70kg (97mm)
55 lb 25kg
66 lb 30kg
2.4” (61mm)
44 lb 20kg
55 lb 7.5” (191mm) 5.4” 25kg (137mm)
2.8” (71mm)
2.4” (61mm)
.25” (6mm) 1.5” (38mm)
74
SHUTIT® HINGES
DDTECH.COM
2.9 TO 3.4” (74-97mm) (ADJUSTABLE)
.25” (6mm)
1.5” (38mm)
1.1” (28mm)
CI3720 Face Mount Bolt-on – Steel to Steel • Achieve gate gaps as small as ½” (13mm) • No maintenance, smooth operation • Offers a full 180º gate opening • Adjustable bracket for round or square posts • Flat, bolt-on brackets for through-bolting • Maximum gate weight: 450kg (1000 lb)
GAP BRACKET VARIANCE
BODY
HEIGHT WEIGHT INCH/MM LB/KG
CI3720
Zinc
Bolt-On
13-25mm (1⁄2”–1”)
Steel
Steel
191mm (71⁄2”)
1.7kg (3.8 lb)
CI3720B Matt Black Bolt-On
13-25mm (1⁄2”–1”)
Steel
Steel
191mm (71⁄2”)
1.7kg (3.8 lb)
2.5" (64mm)
155lb 70kg
(
66 lb 30kg
.625” (16mm)
44 lb 20kg
1
2
3
4
55 lb 25kg
0.5" (12.7mm)
155lb 70kg
66 lb 30kg
44 lb 20kg
55 lb 25kg
7.5" (190.5mm)
4
3.8" (98mm)
3
FIXING
2.3" (59.7mm)
2
FINISH
0.2" (5mm)
1
CODE
1" (25.7mm)
4
155lb 70kg
66 lb 30kg
44 lb 20kg
55 lb 25kg 1.5" (38 mm)
1.5" (38 mm)
CI2051 Round Bolt-on 102mm (4”) CI2053 Round Bolt-on 152mm (6”) CI2054 Round Bolt-on 203mm (8”) • Clamps to round post and bolts to flat post • Two sealed maintenance-free bearings • Horizontally adjustable for precise installations • Flat, bolt-on brackets for through-bolting • Maximum gate weight: 450kg (1000 lb)
CODE
FINISH
FIXING
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
WEIGHT LB/KG
CI2051
Zinc
Bolt-On
70-81mm (23⁄4”–33⁄16”)
Steel
Steel
191mm (71⁄2”)
2.3kg (5 lb)
CI2053
Zinc
Bolt-On
70-81mm (23⁄4”–33⁄16”)
Steel
Steel
191mm (71⁄2”)
4.5kg (10 lb)
CI2054
Zinc
Bolt-On
70-81mm (23⁄4”–33⁄16”)
Steel
Steel
241mm (91⁄2”)
6.8kg (15 lb)
2" (50mm)
1.6” (41mm)
1
2
3
4
155lb 70kg
1.1” (28mm) .25” (6mm)
4” (102mm)
3.75” (95mm)
6.625” (168mm)
66 lb 30
kg .4” (10mm)
44 lb 20kg
55 lb 25kg8.9 (226mm)
0.4" (10mm)
5.9” (150mm)
6.9" (175mm)
1
1.5” (38mm)
2
3
4 3.8” (97mm)
155lb 70kg
1.5” (38mm)
44 lb 20kg
55 lb 25kg
1.5" (38mm)
3.5” (89mm) (FIXED)
CI2051
66 lb 30kg
5.75” (146mm)
4.9 TO 5.4” (124-137mm) (ADJUSTABLE)
6.9" (175mm)
5” (127mm) (FIXED)
6" (152mm) (FIXED)
6.3 TO 6.8” (160-173mm) (ADJUSTABLE)
CI2053
6.8" TO 7.5" (ADJUSTABLE)
CI2054
.625” (16mm) 2 PL
1.5” (38mm)
2.4” (61mm) 1.9” (48mm)
2.8” (71mm)
7.5” (191mm)
5.4” (137mm) 1.9” (48mm)
2.4” (61mm)
1.1” (28mm)
.25” (6mm)
DDTECH.COM
SHUTIT® HINGES
75
Bolt-On Range Wide Bracket, Half Bolt-on/Weld-on Hinges CODE
FINISH
FIXING
GAP VARIANCE
HEIGHT INCH/MM
WEIGHT LB/KG
CI3740A
Unfinished
Bolt-on/ Weld
73–86mm Aluminium Aluminium (3¼”–3¾”)
152mm (6”)
1.36kg (3 lb)
CI3740
Zinc/ Unfinished
Bolt-on/ Weld
73–86mm (3¼”–3¾”)
Aluminium
152mm (6”)
1.8kg (4 lb)
CI3760A
Unfinished
Bolt-on/ Weld
73–86mm Aluminium Aluminium (3¼”–3¾”)
152mm (6”)
1.8kg (4 lb)
BRACKET
Steel
BODY
1.6" (41mm)
1.75" (44mm)
3.8" (97mm)
4.75" (121mm)
2.8" (71mm)
6" (152mm)
1.6" (41mm)
.25" (6mm)
2.8" (71mm)
1.3" TO 1.8" (33-46mm) (ADJUSTABLE)
1
2
3
4
2.7" TO 3.2" (69-79mm) (ADJUSTABLE) lb
155lb 70kg
0.625 (16mm) 4 PL
4" (102mm)
66 30kg
44 lb 20kg
55 lb 25kg
1.6" (41mm)
1
2
3
4
155lb 70kg 1.7" (43mm)
44 lb 20kg
55 lb 25kg
1.5" (38mm)
1.75" (44mm)
3.8" (97mm)
66 lb 30kg
1
4.75" (121mm)
2.8" (71mm)
2
3
4
6" (152mm)
155lb 70kg
66 lb 30kg
1.6" (41mm)
CI3740 – 102mm (4”) Combo Steel .25" /Aluminium Body Half Bolt-on CI3740A – 102mm (4”) Aluminium(6mm) Half Bolt-on1.3" TO 1.8" Made to bolt/weld to 102 - 127mm (4” or 5”) posts
(33-46mm) (ADJUSTABLE)
4.75" (121mm) 6" (152mm)
0.625 (16mm) 4 PL
(69-79mm) CI3760A – 152mm (6”) Aluminium Body Half(ADJUSTABLE) Bolt-on
2.7" TO 3.2"
Made to bolt or weld to 152mm (6”) or larger fence posts
• Wider brackets enable anchor points to be positioned at the sides, rather than Centre of fence post • Side mounting reduces flex, preventing fatigue in post • High-temperature sealed bearings - safe to powder-coat with hinges installed on gate • No greasing, no maintenance – ever! 1.7" 1.5" (38mm) • Precision bushing - distributes gate(43mm) load for optimal performance and longer life • CNC machined to perfection for near frictionless movement • Maximum Gate Weight: 270kg (600 lb)
76
SHUTIT® HINGES
DDTECH.COM
Lorem ipsum
CI3950 Barrel Bolt/Weld-on – Steel to Steel • The strongest, most versatile metal-gate GAP CODE FINISH FIXING VARIANCE hinge on the market Fixed • Bolt-on or weld-on models for heavy duty gates CI3950 Zinc Bolt-On 13 or 89mm 1 ( ⁄2” or 31⁄2”) • Four sealed maintenance-free bearings • Offers a full 180º gate opening • Gate gap fixed at 13mm or 89 mm (½” or 3½”) depending on mounting • Maximum gate weight: 680kg (1500 lb)
3
4
155lb 70kg
1
2
66 lb 30kg
3
1.7” (43mm)
4
44 lb 20kg
155lb 70kg
66 lb 30kg
44 lb 20kg
2.6” (66mm)
55 lb 25kg
1.9” (48mm)
Steel
Steel
HEIGHT WEIGHT INCH/MM LB/KG 150mm (57⁄8”)
1.7” (43mm)
.4” (10mm)
155lb 70kg
1.8kg (4.0 lb)
2.6” (66mm) 1.9” (48mm)
1” (25mm)
1” (25mm)
66 lb 30kg
2X .5” (13mm)
44 lb 20kg
55 lb 25kg 2X 1” (25mm)
1.85” (47mm)
4
BRACKET BODY
.25” (6mm)
55 lb 25kg
1
2X 2” (51mm) 5.9” (150mm)
2.25” (57mm)
2
4X .4” (10mm) SLOTS FOR 3/8 BOLTS
3
4
155lb 70kg
2X .5” (13mm)
Choosing the correct ShutIt® hinges for your gate D&D will soon offer online sizing charts to help select the appropriate ShutIt® hinge pair based on gate size, material, and weight. These charts are being developed to provide a general guide for estimating gate weight and hinge suitability, based on symmetrical gate designs with a known centre of gravity. Important Considerations: • Calculated weights do not include additional hardware (such as latches, drop bolts, or accessories). These should be considered as part of the final gate weight assessment. • For applications close to maximum load limits, select a hinge pair with a higher load capacity to provide an additional safety margin. • Environmental conditions, including wind loads and site-specific factors, may require a higher-capacity hinge combination. Installer Responsibility: Installers must assess the specific conditions of each installation to ensure the selected hinges are suitable for the application. Using hinges outside recommended specifications may result in reduced performance or product failure. Where welding is involved, appropriate engineering and fabrication practices should be followed.
DDTECH.COM
SHUTIT® HINGES
77
66 lb 30kg
Self-Closing Range CI3000R BRACKET Steel
Steel
152mm (5”)
Steel
Steel
127/97mm (5”/33⁄4”)
66 lb 30kg
44 lb 20kg
Weld-on
64-76mm (21⁄2”–3”)
CI3850 (Set)
Zinc
Weld-on
64-76mm (21⁄2”–3”)
3
4
2 1/8" 54mm
3/16" 5mm
3/16" 5mm
5 1/4" 133mm
55 1 lb 25kg
3 1/4" 82mm
1 1/2" 38mm 2 13/16" 71mm
2 1/8" 54mm
4 1/16" 103mm
2 5/8" - 3" [68mm - 80mm] (ADJUSTABLE)
155lb 70kg
440lb 200 kg
HEIGHT INCH/MM
BODY
1 1/2" 38mm
Zinc
CI3825
1 1/4" 32mm
• Set contains CI3825 + CI3000 • Suits restricted-access and industrial gates • Eliminates the need to fit a gate closer • Installation must include a gate-stop or latch/lock • 5 tension-adjustment settings (inc. bracket) 1 2 • Max self-closing gate weight: 140kg (300lbs) (CI3850 set) • Max self-closing gate weight: 200kg (440lbs) (2 x CI3825)
GAP VARIANCE
4 1/8" 105mm
FIXING
05-0333
1 1/2" 38mm
2 5/8" - 3" [68mm - 80mm] (ADJUSTABLE)
CODE CI3825R FINISH
1 1/2" 38mm
05-0334 CI3825 Weld-On, Closer CI3850 Weld-On, SC Set
CI3825R Centre Mount, Round Post, Closer CI3850R Centre Mount, Round Post, SC Set
CI3825R 05-0333
1 1/2" 38mm
1 1/2" 38mm
2 1/8" 54mm
1 1/2" 38mm
2 1/8" 54mm
BRACKET
BODY
HEIGHT INCH/MM
CI3825R
Zinc
Weld-on
61-74mm (23⁄8”–27⁄8”)
Steel
Steel
191mm (71⁄2”)
CI3850R (Set)
Zinc
Weld-on
61-74mm (23⁄8”–27⁄8”)
Steel
Steel
191/97mm (71⁄2”/ 33⁄4”)
3
4
66 lb 30kg
44 lb 20kg
1 1/4" 32mm
155lb 70kg
FIXING
GAP VARIANCE
BRACKET
CI3825FM
Zinc
Weld-on
13-25mm (1⁄2”–1”)
CI3850FM
Zinc
Weld-on
13-25mm (1⁄2”–1”)
3
1 5/16" 34mm
4 440 4lb 200 kg
78
HEIGHT INCH/MM
Steel
Steel
152mm (6”)
Steel
Steel
191/152mm (71⁄2”/ 6”)
(
(
44 lb 44 lb 201.5" kg 20kg 37.5mm)
DDTECH.COM
4.1" (104mm)
55 lb 55 lb 25kg 25kg 0.5" (12.7mm)
2.8" (71mm)
3.8" (98mm)
1.7" 43mm)
SHUTIT® HINGES
66 lb 66 lb 30kg 30kg
2.3" (59.7mm)
2.2" (55mm)
1" (25.7mm) 4.1" (104mm)
BODY
155lb155lb 70kg 70kg
0.5" (12.7mm)
1 9/16" 40mm
2.2" (55mm)
3
FINISH
1.5" 37.5mm)
(
2.8" (71mm)
3.8" (98mm)
0.2" (4.8mm)
• Set contains CI3825FM + CI3050 • Offers a 180º gate opening for unobstructed passage • Horizontally adjustable from 13mm to 25mm • Quiet and smooth operation • Max self-closing gate weight: 2 2 140kg (300lbs) (CI3850FM set) 1 1 • Max self-closing gate weight: 200kg (440lbs) (2 x CI3825FM)
CODE
0.2" (4.8mm)
CI3825FM Weld-on, Face-Mount, Closer CI3850FM Weld-on, Face-Mount, SC Set
55 1 lb 25kg
3/16" 5mm
3/16" 5mm
440lb 200 kg
3 1/4" 82mm
GAP VARIANCE
4 1/8" 105mm
FIXING
5 1/4" 133mm
FINISH
2 13/16" 71mm
CODE
4 1/16" 103mm
2
2 5/8" - 3" [68mm - 80mm] (ADJUSTABLE)
2 5/8" - 3" [68mm - 80mm] (ADJUSTABLE)
1 1/2" 38mm
CI3000R
• Set contains CI3825R + CI3000R 05-0334 • Post and frame mounting brackets are concaved • Easy weld-on installation for round posts • Eliminates the need to fit a gate closer • 5 tension adjustment settings • Max self-closing gate weight: 140kg (300lbs) (CI3850R set) • Max self-closing gate weight: 200kg (440lbs) (2 x CI3825R)
1
1 9/16" 40mm
1 5/16" 34mm
(
1.7" 43mm)
CI3835 Centre-Mount Bolt-On Closer CI3860 Centre-Mount Bolt-On SC Set
• Set contains CI3835 + CI3700 • High traffic, no maintenance, smooth operation • Compatible for use on aluminium gates CI3835 05-0329 • Flat, bolt-on brackets for through-bolting • Max self-closing gate weight: 140kg (300lbs) (CI3860 set) • Max self-closing gate weight: 200kg (440lbs) (2 x CI3835)
CODE
FINISH
FIXING
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
CI3835
Zinc
Bolt-on
74-86mm (27⁄8”–33⁄8”)
Steel
Steel
220mm (8 2/3”)
CI3860 (Set)
Zinc
Bolt-on
74-86mm (27⁄8”–33⁄8”)
Steel
Steel
220/191mm (8 2/3”/ 71⁄2”)
16mm
61mm
16mm
16mm
2 PL
2 PL
61mm
2 PL
440lb 200 kg
43mm
43mm
66 lb 61mm 30kg
5/8" 16
2
71mm
71mm
61mm
61mm 191mm
3
137mm
137mm
4
28mm
28mm
191mm
191mm
137mm
3/4" 19mm
1 11/16" 43mm
3.8”
97mm
5/8" 16
71mm
97mm
55 1 lb 25kg
44 lb 20kg
3.8” 97mm
CI3835FM 05-0331
3.8” 43mm
155lb 70kg
8 11/16" 221mm
4
6 9/16" 167mm
3
5 1/4" 133mm
2
1 1/2" 38mm
1
4 1/8" 105mm
3 1/4" 83mm
.25”
.25”
6mm
6mm
6mm
38mm
6mm
38mm
74-97mm 74-97mm (ADJUSTABLE) (ADJUSTABLE)
3 1/4" 83mm
2 7/8" - 3 3/8" [73mm - 86mm] (ADJUSTABLE)
6 9/16" 167mm
4 1/8" 105mm
FIXING
GAP VARIANCE
BRACKET 38mm
(ADJUSTABLE) CI3835FM Zinc
Bolt-on
13-25mm (1⁄2”–1”)
Steel
Steel
220mm (8 2/3”)
CI3860FM
Zinc
Bolt-on
13-25mm (1⁄2”–1”)
Steel
Steel
220/191mm (8 2/3”/ 71⁄2”)
1
2
3
4
1 1/2" 38mm
74-97mm
5/8" 16
9/16" - 1 1/16" [14mm - 27mm] GATE GAP ADJUSTMENT
6mm
3 3/4" 96mm
2.5" (64mm)
3/4" 19mm
1 1/2" 38mm
2.5" (64mm)
0.6" 16.3mm)
8 11/16" 221mm
6 9/16"
CI3835FM 05-0331
3 3/4" 96mm
0.5" (12.7mm)
0.5" (12.7mm)
5/8" 16
2.3" (59.7mm)
9/16" - 1 1/16" [14mm - 27mm] GATE GAP ADJUSTMENT
0.6" 16.3mm)
0.2" (5mm)
1" (25.7mm)
1 1/2" 38mm
1.5" (38.1mm)
1.5" (38.1mm)
1 1/2" 38mm
8 11/16" 221mm
Self-closing - NON Safety Models NOT suitable for child/pool safety
ShutIt® Center Mount
3/4" 19mm
1 1/2" 38mm
1.5" (38.1mm)
1.5" (38.1mm)
9/16" - 1 1/16" [14mm - 27mm] GATE GAP ADJUSTMENT
3 3/4" 96mm
ShutIt® Face Mount 3/4" 19mm
FENCE
GATE GATE
8 11/16" 221mm
2 9/16" 66mm
3 3/4" 96mm
4 1/8" 105mm
3/4" 19mm
1" (25.7mm)
6 9/16" 167mm
1 1/2" 38mm
0.2"167mm (5mm)
3/4" 19mm
8 11/16" 221mm
( 4 1/8" 105mm
1 1/2" 38mm
440lb 155lb 200 kg 70kg
3 3/4" 96mm
2 9/16" 66mm
(
HEIGHT BODY 28mm INCH/MM
FENCE
1 1/2" 38mm 3 3/4" 96mm
GATE
110º Face of gate and post are aligned 8 11/16" 221mm
Center of gate and post are aligned
DDTECH.COM
SHUTIT® HINGES
79
3.8" (98mm)
6mm
• Set contains CI3835FM + CI3720 • Offers a 180º gate opening for unobstructed passage • Horizontally adjustable from 13mm to 25mm • Flat, bolt-on brackets for through-bolting CI3835FM • M05-0331 ax self-closing gate weight: 140kg (300lbs) (CI3860FM set) • Max self-closing gate weight: 200kg (440lbs) (2 x CI3835FM)
3/4" 19mm
FINISH
2.3" (59.7mm)
1 1/2" 38mm
CODE
7.5" (190.5mm)
.25”
3.8" (98mm)
CI3835FM Face-Mount Bolt-On Closer CI3860FM Face-Mount Bolt-On SC Set
8 11/16" 221mm
2 9/16" 66mm
61mm
Weld-On Range CI3600 – Baby BadAss™ Steel CI3620 – Baby BadAss™ ‘Rusted’ CI3650 – Baby BadAss™ Aluminium CI3670 – Baby BadAss™ Combo
1
2
3 1
CODE
FINISH
FIXING
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
WEIGHT LB/KG
CI3600
Zinc
Weld
64–76mm (21⁄2”–3”)
Steel
Steel
33mm (13⁄8”)
0.5kg (1 lb)
CI3620
Unfinished
Weld
64–76mm (21⁄2”–3”)
Steel
Steel
33mm (13⁄8”)
0.5kg (1 lb)
CI3650
Unfinished
Weld
64–76mm (21⁄2”–3”)
33mm (13⁄8”)
0.5kg (1 lb)
CI3670
Zinc/ Unfinished
Weld
64–76mm (21⁄2”–3”)
33mm (13⁄8”)
0.5kg (1 lb)
Aluminium Aluminium Steel
Aluminium
• One sealed maintenance-free bearing (no greasing) • High-temp bearings safe to powder-coat • Designed for lighter gates 2.5 TO 3” (64-76mm) • Horizontally adjustable (ADJUSTABLE) • Ideal for square or round post installations 1.2 TO 1.7” 1.4” (30-43mm) (36mm) • Maximum gate weight: 140kg (300 lb) (ADJUSTABLE) (FIXED)
4
.75” (19mm)
.5” (13mm)
0.28
1.3” (33mm)
1.8” (46mm)
CI3000 – Original BadAss™ CI3100 – Original BadAss™ ‘Rusted’
1.7” (43mm)
80
4 1
FIXING
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
WEIGHT LB/KG
CI3000
Zinc
Weld
61–74mm (23⁄8”–27⁄8”)
Steel
Steel
97mm (33⁄4”)
1.1kg (2.5 lb)
CI3100
Unfinished
Weld
61–74mm (23⁄8”–27⁄8”)
Steel
Steel
97mm (33⁄4”)
1.1kg (2.5 lb)
.2” (5mm)
3.8” 2.8 (97-mm) (71mm)”
1.25” (32mm)
3.8” 2.8 (97-mm) (71mm)”
1.5” (38mm)1.1 TO 1.5”
1.5” (38mm)
SHUTIT® HINGES
3
FINISH
2.4 TO 2.9” (61-74mm) 1.5” (ADJUSTABLE) (38mm)
1.5” (38mm)
2
CODE
• Adjustable bracket for precise installations • Two sealed maintenance-free bearings • High-temp bearings safe to powder-coat • Hinge body welds to either flat or round posts 2.4 TO 2.9” (61-74mm) • Maximum gate weight: 450kg (1,000 lb) (ADJUSTABLE)
1.7” (43mm)
1
(28-38mm) (ADJUSTABLE)
DDTECH.COM
1.1 TO 1.5” (28-38mm) (ADJUSTABLE)
.2” (5mm)
1.25” (32mm
CI3200 – BadAss™ Combo Steel Body 1 CI3300 – BadAss™ Combo Aluminium Body CI3400 – The Aluminium BadAss™
2
3
4 1
CODE
FINISH
FIXING
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
WEIGHT LB/KG
CI3200
Zinc/ Unfinished
Weld
61–74mm (23⁄8”–27⁄8”)
Aluminium
Steel
97mm (33⁄4”)
1.1kg (2.5 lb)
CI3300
Zinc/ Unfinished
Weld
61–74mm (23⁄8”–27⁄8”)
Steel
Aluminium
97mm (33⁄4”)
1kg (2 lb)
CI3400
Unfinished
Weld
61–74mm (23⁄8”–27⁄8”)
Aluminium Aluminium
97mm (33⁄4”)
1kg (2 lb)
• Adjustable bracket for precise installations • High-temp bearings safe to powder-coat • Two sealed maintenance-free bearings (per hinge) • Perfect for that high-end installation 2.4 TO 2.9”
.2” (5mm)
.2” (5mm)
(61mm-74mm) (ADJUSTABLE)
• Round or plate post installations • Maximum gate weight: 270kg (600 lb)
3.8” 2.8” (97mm) (71mm)
2.4 TO 2.9” (61mm-74mm) (ADJUSTABLE) 1.5” (38mm)
1.7” 1.5” (43mm) (38mm)
1.7” 1.5” (43mm) (38mm)
1.25” (32mm)
3.8” 2.8” (97mm) (71mm)
1.25” (32mm)
1.5” (38mm) 1.1 TO 1.5” (28mm-38mm) (ADJUSTABLE) 1.1 TO 1.5” (28mm-38mm) (ADJUSTABLE)
1
2
3
4 1
CI3800 – Stainless Steel BadAss™ CODE
FINISH
FIXING
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
WEIGHT LB/KG
CI3800
Unfinished
Weld
61–74mm (23⁄8”–27⁄8”)
Stainless
Stainless
97mm (33⁄4”)
1.1kg (2.5 lb)
• 304 stainless steel includes the bearings, shaft (bolt), washers, retaining ring and locknut • Two sealed maintenance-free bearings (no greasing) • Adjustable yoke for perfect installations • Hinge body welds to either flat or round posts • Maximum gate weight: 450kg (1,000 lb)
.2” (5mm)
2.4 TO 2.9” (61mm-74mm) (ADJUSTABLE)
1.7” 1.5” (43mm) (38mm)
3.8” 2.8” (97mm) (71mm)
1.25” (32mm)
1.5” (38mm)
1.1 TO 1.5” (28mm-38mm) (ADJUSTABLE)
DDTECH.COM
SHUTIT® HINGES
81
Weld-On Range 1
2
3
CI3500 – Heavy Duty BadAss™ 155lb 66 lb 4 CODE
FINISH
FIXING
30kg GAP BRACKET VARIANCE
CI3500
Zinc
Weld
61–74mm (23⁄8”–27⁄8”)
1
44 lb 20kg
70kg
2
3
BODY
Steel
4
Steel
55 lb
25kg WEIGHT HEIGHT INCH/MM LB/KG 97mm (33⁄4”)
155lb 70kg
1.6kg (3.5 lb)
66 lb 30kg
44 lb 20kg
5mm
• High-temp bearings safe to powder-coat • Adjustable bracket for perfect installations • Hinge body welds to either flat or round posts 43mm TM38mm • Holds 50% more load than the ‘Original’ BadAss • Maximum gate weight: 680kg (1,500 lb)
61-74mm ADJUSTABLE
44mm
97mm 71mm 38mm
28-38mm ADJUSTABLE
CI3520 – 100 Year BadAss™ 1
2
3
4
155lb 70kg GAP
CODE
FINISH
FIXING
CI3520
Zinc
Weld
1
2
VARIANCE
66 lb 30kg
64–76mm (21⁄2”–3”)
3
4
44 lb 20kg
55 lb
BRACKET
BODY
25kg WEIGHT HEIGHT INCH/MM LB/KG
Steel
Steel
104mm (4”)
155lb 70kg
• High-temp bearings safe to powder-coat • Thicker bracket and higher-tensile shaft 1.7” 1.5” • Hinge body welds to either flat or round posts(43mm) (38mm) • Adjustable bracket for precise installations • Guaranteed for 100 years! • Maximum gate weight: 680kg (1,500 lb)
155lbWeld-On 66 lb BadAss™ 44 lb 4CI3050 – Face Mount 70kg
FINISH
FIXING
GAP VARIANCE
1
Zinc
2
Weld
3
13–25mm (1⁄2”–1”)
4
• Opens to 180° • Achieve gate gaps as small as 13mm (1⁄2“) • Horizontally adjustable to 13mm (1⁄2“) • High-temp bearings safe to powder-coat • Maximum gate weight: 450kg (1,000 lb)
155lb 70kg
66 lb 30kg
SHUTIT® HINGES
HEIGHT INCH/MM
WEIGHT LB/KG
Steel
Steel
98mm 155 lb 70(3kg7⁄8”)
0.8kg 66 lb (1.8 30lb)kg
4
44 lb 20kg
DDTECH.COM
44 lb 20kg
1.5" 37.5mm)
(
55 lb 25kg
0.5" (12.7mm)
1" (25.7mm) 4.1" (104mm)
82
BODY
2.3" (59.7mm)
3
55 lb 25kg
20kg
BRACKET
2.8" (71mm)
2
3.8" (98mm)
1
30kg
CODE CI3050
44 lb 20kg
1.75” (44mm)
2.2" (55mm)
3
.3” (8mm)
1.2 TO 1.7” (30-43mm) (ADJUSTABLE)
0.2" (4.8mm)
2
66 lb 30kg
2.5 TO 3” (64-76mm)
• Load rating per gate: 2,000 lb (ADJUSTABLE) 3.1” 4.1” (900kg) (104mm) (79mm)
1
1.6kg (3.5 lb)
(
1.7" 43mm)
FINISH
FIXING
GATE GAP
BRACKET
BODY
CI3075
Zinc
Weld-On
Flat posts: Fixed 70mm (23⁄4”). Round posts: no gap.
Steel
Steel
95mm (33⁄4”)
1
WEIGHT LB/KG 1kg (2.2 lb)
3
4 1
2
2 13/64" (56mm)
3
(
1 17/64" (32mm)
• One simple hinge that welds on nearly any gate right out of the box • Fits either flat or round posts or gates no adaptors needed • High-temp bearings safe to powder-coat • Smoother than traditional block or barrel hinges • 2 sealed ball bearings 2 43/64" (68mm) • Maintenance-free, never needs lubrication • Maximum gate weight: 450kg (1,000 lb)
2
1 17/64" (32mm)
CODE
HEIGHT INCH/MM
1 11/16" 43mm)
3 55/64" (98mm)
CI3075 – VersaWeld™ BadAss™ Hinge
2 13/64" (55.56mm)
ShutIt® benefits of powder-coating with hinges installed on the gate • High-temperature sealed bearings • No need to remove bearings prior to powder-coating • Applies to all ShutIt® hinges, except self-closing models and stainless steel model (CI3800) • No more need for welding in the field • Consistent, high-quality finish • Gate, fence, hinge and weld finish all Colour match • No greasing, no maintenance - ever! • Horizontal adjustability for perfect installation • Tested to over 1 million open/close cycles • ShutIt® now offers matte black, powder coated hinges (CI3700B • CI3720B • CI3750B)
1
2
DDTECH.COM
3
4
SHUTIT® HINGES
83
4
CI3975 Uphill BadAss™ Strap Hinge Set (Includes: 1x CI3900 + 1x CI3925)
1
2
3
CODE
FINISH
FIXING
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
WEIGHT LB/KG
CI3975
Zinc
Weld
Fixed 13mm (1⁄2”)
Steel
Steel
150mm (6”)
6.1kg (13.5 lb)
44 lb 20kg
155lb 55 lb 70kg 25kg
4 1PER HINGE2
• Suitable for motorized, uphill or heavy gates • High-temp bearings safe to powder-coat • For square-posted, weld-on installations • Zinc electroplated external components • Swings 180º; fixed gap variance 13mm (1⁄2“) • Leaf straps can be cut to length • Maximum gate weight: 680kg (1,500 lb)
3 155lb 4
66 lb 30kg
70kg
ROAD
66 lb 30kg
DRIVEWAY
DRIVEWAY
ROAD SLOPE GRADIENT MATRIX AVAILABLE ON D&D’S WEBSITE OR BY REQUEST
CI3900 – 6” (152mm) BadAss™ Strap-Hinge 1.85” (47mm)
.4” (10mm)
CODE
FINISH
FIXING
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
WEIGHT LB/KG
CI3900
Zinc
Weld
Fixed .4” (10mm) 13mm (1⁄2”)
Steel
Steel
150mm (6”)
2.7kg (6 lb)
6.9” (175mm) 6” (152mm)
2” (51mm) .25” (6mm) 6” (152mm)
1.85” (47mm)
.4” (10mm)
2” (51mm)
.4” (10mm)
1” (25mm) 6.9” (175mm)
6” (152mm)
6” (152mm)
6.9” (175mm)
CI3925 – 10” (245mm) BadAss™ Strap-Hinge
2” (51mm)
.25” (6mm)
6” (152mm)
1.85” (47mm)
.4” (10mm)
CODE
FINISH
CI3925
Zinc
2” (51mm)
FIXING
Fixed 13mm (1⁄2”)
1” (25mm)
GAP VARIANCE
BRACKET
BODY
HEIGHT INCH/MM
WEIGHT LB/KG
76–89mm (3”–31⁄2”)
Steel
Steel
150mm (6”)
3.4kg (7.5 lb)
.4” (10mm)
6” (152mm) 6.9” (175mm)
10.9” (277mm) 10” (254mm)
2” (51mm) .25” (6mm) 5.9” (150mm) 2” (51mm) .4” (10mm)
1.85” (47mm)
.4” (10mm)
1” (25mm)
10” (254mm) 10.9” (277mm)
10.9” (277mm)
84
SHUTIT® HINGES
10” (254mm)
DDTECH.COM .25” (6mm) 5.9” (150mm)
2” (51mm)
44 lb 20kg
SHUTIt
Brilliant designs. BadAss Products. Epic Results. The ShutIt® Hardware story ShutIt® Gate Hardware starts as Counsel Industries LLC and becomes an early leader in the design and distribution of hardware and gate systems for the fence and access control industries. Mid-1990s: As vehicular access control begins to explode as an industry, two veterans of the fence and access control industries discovered that many of their maintenance and repair issues for automated gate systems were being caused by the faulty or inferior hardware used on many gates. With the help of a team of engineers and an award-winning CNC machinist, Counsel leaders set out to develop a line of products that would eliminate the damage caused to expensive operator systems and gates. After years of development and field testing, Counsel Industries was born. 1998: Counsel begins marketing innovative gate solutions designed to ease installation requirements and eliminate premature wear on expensive, automated gate-operator systems. 2010: Counsel rebrands itself as ShutIt® Gate Hardware in order to better reflect what the company had become Brilliant Designs. BadAss Products. Epic Results. 2016: D&D Technologies acquires ShutIt® Gate Hardware. BadAssTM hinges, HardCore Wheels, full cantilever and slider systems are added to the D&D family of products. D&D + ShutIt®: providing the industry with the broadest range of gate hardware. 2019: The VersaWeld hinge is added (CI3075). Designed for round or flat posts without the need for an adaptor, giving installers a single hinge that they can weld to just about any steel gate. • Weld-on and bolt-on Face Mount hinges (CI3050 & CI3720) are introduced, enabling full, unobstructed 180˚openings. • To reduce flexing on 4” (102mm) wide posts, three models of hinges with wider mounting brackets (CI3740A, CI3740 & CI3760A) are introduced to ensure added strength and longevity. 2021: A face-mounted, self-closing hinge set (CI3880) is added and features both vertical and horizontal adjustability.
The ShutIt® difference • CNC machined to the tightest tolerances in the industry • Unique bushing design produces near-frictionless movement and maintenance-free usage • Highest-quality sealed radial ball bearings never need greasing or maintenance • Four different sealed bearing configurations – 1, 2, 3 or 4 bearings per hinge; 2 bearings per wheel. • All components are zinc electroplated to prevent rust and corrosion - exceptions: Aluminium, stainless steel and rusted look • Steel Stover™ lock-nuts used to prevent loosening and slipping • Super-hard, cold-rolled steel used on all HardCore wheels; literally Hard to the Core • Slotted yokes for horizontal adjustability
Proper welding Warning: Hinges will be damaged if electrical welding current is not properly grounded, resulting in the Warranty being made void. • Damage can be caused by excessive heat or by welding current passing through the bearings. Ensure that the welding ground is always on the side being welded. Current must not pass through the bearings or severe damage will result. • To prevent heat-related damage to the bearings, the welding process must be done in several small segments. Weld one surface at a time and alternate between top and bottom hinge. After each small segment is welded, the hinge should be allowed to cool before welding the next segment. • Use general, field-welding operations with suitable heat transfer controls. Protect hinge from weld spatter. • Clean up and finish with appropriate corrosion and rust protection.
DDTECH.COM
SHUTIT® HINGES
85
SHUTIt
Industrial strength gate wheels The ShutIt, Hardcore range of gate wheels are engineered for strength, durability, and smooth operation. Featuring maintenance-free sealed bearings and zinc-plated finishes, they’re built to outlast and outperform.
86
SHUTIT® GATE WHEEL
DDTECH.COM
Hardcore Range (Not available in Australia or New Zealand)
SHUTIT ® V-GROOVE WHEELS 4” & 6” (102 & 152MM)
SHUTIT ® CANTILEVER WHEEL SET
SHUTIT ® WITH CARRIAGE PLATE 4” & 6” (102 & 152MM)
HHHHH ”We specialize in commercial access control gates and pride ourselves on always using the best products for the quality of our work. ShutIt® hardware just works, I install a hinge or wheel and I don’t have to worry about it. I had installed a competitors gate wheel on a heavy gate and one evening I received a call that the wheel had broken and I had to return to fix it. I did not have a replacement wheel with me but remembered that I received a sample 6” ShutIt® wheel in my truck. I replaced the broken wheel with the ShutIt® wheel and have never had to return.” RUSTIN - H&R OPERATORS SERVICES, INC.
DDTECH.COM DDTECH.COM
SHUTIT® GATE WHEEL
87 87
SHUTIt
HARDCORE™
Anatomy of a ShutIt® Gate Wheel Zinc electroplating
Hardest steel
• Long lasting rust and corrosion protection
At ShutIt® we use the hardest steel in the industry in our wheels, making them literally ‘Hard to the Core’ (30 RC Rated)
• On all wheel components except Aluminium carriage plates
Tightest tolerance in the industry Virtually frictionless rotation
Spacer (bushing) • Spacer options for 11⁄2" (38mm) and 2" (50mm) wide gate profiles • Distributes load directly onto the Centre ring of the sealed bearings for optimal performance and long life
Two sealed bearings • Require no greasing • Maintenance free
Narrow wheel profile Reduces possibility of wheel hitting debris and running off track
Carriage plates • Most versatile in assuring proper spacing under gates • No need to stock multiple wheel boxes • Less obtrusive than wheel boxes • Fits to all common gate widths • Vertically adjustable • Available in Aluminium and steel
88
SHUTIT® GATE WHEEL
DDTECH.COM
SHUTIt
CI2240 HARDCORE™ CANTILEVER WHEEL ASSEMBLY
CI2300 HARDCORE™ GATE GUIDE ASSEMBLY
HARDCORE™
CI2515 4” V-GROOVE WHEEL WITH CARRIAGE PLATES
CI2715 6” V-GROOVE WHEEL WITH CARRIAGE PLATES
# OF MAX GATE MAX GATE SEALED WEIGHT LOAD BEARINGS
CI2415 4” V-GROOVE WHEEL
CI2620 6” V-GROOVE WHEEL
WHEEL MATERIAL
CARRIAGE PLATE MATERIAL
HEIGHT INCH/MM
WEIGHT LB/KG
-
-
Steel
102mm (4")
1kg (2 lb)
-
-
-
Alum
102mm (4")
0.7kg (1.5 lb)
-
-
-
-
Steel
152mm (6")
1.6kg (3.5 lb)
Alum
-
-
-
-
Alum
152mm (6")
1kg (2 lb)
Weld
Zinc
2
680kg (1,500 lb)
1,360kg (3,000 lb)
Steel
-
152mm (6")
2.3kg (5 lb)
152mm (6”) Cantilever Wheel Assembly
Weld
Zinc
2
680kg (1,500 lb)
1,360kg (3,000 lb)
Steel
-
203mm (8")
4.8kg (10.5 lb)
CI2300
Guide Assembly
Weld
Zinc
2
-
-
-
-
152mm (6")
1.8kg (4 lb)
CI2350
Extended Guide Assembly
Weld
Zinc
2
-
-
-
-
254mm (10")
2kg (4.5 lb)
CI2340
102mm (4”) Carriage Cap
Weld
Zinc
-
-
-
-
-
152mm (6")
0.5kg (1 lb)
CI2360
152mm (6”) Carriage Cap
Weld
Zinc
-
-
-
-
-
203mm (8")
0.7kg (1.5 lb)
CI2415
102mm (4”) Wheel - 38mm (11⁄2”) Frame
Bolts to plates
Zinc
2
680kg (1,500 lb)
1,360kg (3,000 lb)
Steel
-
102mm (4")
2kg (4.5 lb)
CI2420
102mm (4”) Wheel - 51mm (2”) Frame
Bolts to plates
Zinc
2
680kg (1,500 lb)
1,360kg (3,000 lb)
Steel
-
102mm (4")
2kg (4.5 lb)
CI2515
102mm (4”) Wheel - 38mm (11⁄2”) Frame Set *
Weld
Zinc
2
680kg (1,500 lb)
1,360kg (3,000 lb)
Steel
Steel
102mm (4")
2.7kg (6 lb)
CI2520
102mm (4”) Wheel - 51mm (2”) Frame Set *
Weld
Zinc
2
680kg (1,500 lb)
1,360kg (3,000 lb)
Steel
Steel
102mm (4")
2.7kg (6 lb)
CI2615
152mm (6”) Wheel - 38mm (11⁄2”) Frame
Bolts to plates
Zinc
2
1,000kg (2,200 lb)
2,270kg (5,000 lb)
Steel
-
152mm (6")
4kg (9 lb)
CI2620
152mm (6”) Wheel - 51mm (2”) Frame
Bolts to plates
Zinc
2
1,000kg (2,200 lb)
2,270kg (5,000 lb)
Steel
-
152mm (6")
4.3kg (9.5 lb)
CI2625
152mm (6”) Wheel For Wheel Boxes †
Bolts to box
Zinc
2
1,000kg (2,200 lb)
2,270kg (5,000 lb)
Steel
-
152mm (6")
4.3kg (9.5 lb)
CI2715
152mm (6”) Wheel 38mm (11⁄2”) Frame Set *
Weld
Zinc
2
1,000kg (2,200 lb)
2,270kg (5,000 lb)
Steel
Steel
152mm (6")
5.4kg (12 lb)
CI2720
152mm (6”) Wheel 51mm (2”) Frame Set *
Weld
Zinc
2
1,000kg (2,200 lb)
2,270kg (5,000 lb)
Steel
Steel
152mm (6")
6kg (12.5 lb)
SHUTIT® GATE WHEEL
89
CODE
PRODUCT NAME**
FIXING METHOD
FINISH
CI2140
102mm (4”) Carriage Plate Set - Steel ††
Weld
Zinc
-
-
CI2140A
102mm (4”) Carriage Plate Set - Aluminium ††
Weld
Alum
-
CI2160
152mm (6”) Carriage Plate Set - Steel ††
Weld
Zinc
CI2160A
152mm (6”) Carriage Plate Set - Aluminium ††
Weld
CI2240
102mm (4”) Cantilever Wheel Assembly
CI2260
All weight ratings are based upon two wheels. * Includes one wheel and two slotted carriage plates. ** All wheels include axle bolt, washers and locknuts. † For retrofit/repair † † Set includes two slotted carriage plates.
DDTECH.COM
1
2
V-Groove Wheel for 1½” (38mm) Gate Frame 155lb 66 lb 3 4 30kg HEIGHT INCH/MM
WEIGHT LB/KG
680kg (1,500 lb)
Steel
102mm (4”)
2kg (4.5 lb)
1,000kg (2,200 lb)
Steel
6” (152mm)
4kg (9 lb)
FINISH
FIXING
MAX GATE WEIGHT
CI2415
Zinc
Bolts to plates
CI2615
Zinc
Bolts to plates
70kg
44 lb 20kg
WHEEL
CODE
55 lb 25kg
1.5” (38mm)
.5” HEX NUT (13mm) .5” FLAT WASHERS 2 PL (13mm) 1.5” SPACERS (38mm) 2 PL 2.8 (71mm)
CI2415 - 102mm (4”) CI2615 - 152mm (6”)
1.5” (38mm)
.5” HEX BOLT (13mm) 4” (102mm)
• Narrow width to reduce friction and debris issues • This wheel does not include carriage plates • Adjustable plates for perfect installations • Super-hard cold rolled steel (30RC rating) • Max gate weight: 680kg (1,500 lb) 1,000kg (2,200 lb)
1.1” (28mm) .7” (18mm)
90°
1.1” (28mm)
6” (152mm)
.7” (18mm)
90°
V-Groove Wheel for 2” (51mm) Gate Frame
1
2
CODE
3
FINISH
FIXING
MAX GATE WEIGHT
CI2420
Zinc
Bolts to plates
680kg (1,500 lb)
CI2620
Zinc
Bolts to plates
1,000kg (2,200 lb)
4
HEIGHT 66 lb INCH/MM
WEIGHT44 LB/KG lb
Steel
102mm (4”)
2kg (4.5 lb)
Steel
6” (152mm)
4.3kg (9.5 lb)
WHEEL 155 lb 70kg
30kg
55 lb 25kg
20kg
2” (51mm)
.50 HEX NUT (13mm) .50 FLAT WASHERS 2 PL (13mm) 1.5” SPACERS (38mm) 2 PL 3.3” (84mm) .5” HEX BOLT (13mm)
1.1” (28mm)
4” (102mm)
CI2420 - 102mm (4”) CI2620 - 152mm (6”)
.7” (18mm) 90°
• Max gate weight: 680kg (1,500 lb) / 1,000kg (2,200 lb)
6” (152mm)
Clearance advantage for a 4” Wheel ShutIt® wheels machined from the hardest steel, enable a narrow design. Narrower wheel profile of the ShutIt® Wheel helps prevent wheel from hitting debris and track anchor bolts.
90
SHUTIT® GATE WHEEL
DDTECH.COM
Wheel with Carriage Plates for 38mm (1½”) Gate Frame
1
2
CODE
3
FINISH
4
FIXING
MAX GATE WEIGHT
155lb WHEEL
HEIGHT PLATE 66 lb INCH/MM
CI2515
Zinc
Weld
680kg (1,500 lb)
Steel
Steel
CI2715
Zinc
Bolts to plates
1,000kg (2,200 lb)
Steel
Steel
70kg
30kg
4.4” (112mm) NOMINAL [3.5 TO 5.2” (81-132mm)] (ADJUSTABLE) .12” (3mm) 2.8” (71mm) .12” (3mm)
⁄”
2.7kg (6 lb)
188mm (71⁄2”)
5kg (12 lb)
(3
6” (152mm)
3” (76mm)
55 lb 25kg
6” (152mm)
1.5” (38mm
7.4” (188mm) NOMINAL NOMINAL 2.7” [6.5 TO(69mm) 8.2” (165-208mm)]
.6” (15mm)
.12” (3mm)
8” 119mm (203mm) 5 4” (4 8 ) (102mm)
WEIGHT 44 lb LB/KG 20 kg
[2.1 TO 3.2” (56-81mm)] (ADJUSTABLE)
4” (102mm)
4.7” (119mm)NOMINAL 2.8” [4.2 TO 5.2” (71mm) (107-132mm)]
6” (152mm)
.6” (15mm) .12” (3mm)
CI2515 - 102mm (4”) CI2715 - 152mm (6”)
4” (102mm)
4” (102mm)
• Adjustable plates for perfect installations • Includes carriage plates • Narrow with to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) .12” (3mm) Max gate weight: 680kg (1,500 lb) / 1,000kg (2,200 lb)
8” (203mm)
1.5” (38mm)
4.4” (112mm) NOMINAL [3.5 TO 5.2” (81-132mm)] (ADJUSTABLE)
2.8” (71mm)
6” (152mm)
7.4” (188mm) NOMINAL [6.5 TO 8.2” (165-208mm)] 1.1” (28mm)
.6” (15mm)
.12” (3mm)
90°
6” (152mm)
.7” (18mm) 90°
Wheel with Carriage Plates for 51mm (2”) Gate Frame
1
2
CODE
3
FINISH
4
FIXING
MAX GATE WEIGHT
WHEEL 155lb
HEIGHT PLATE 66 lb INCH/MM
CI2520
Zinc
Weld
680kg (1,500 lb)
Steel
Steel
119mm (45⁄8”)
CI2720
Zinc
Weld
1,000kg (2,200 lb)
Steel
Steel
188mm (71⁄2”)
70kg
30kg
3” (76mm)
WEIGHT
44 lb LB/KG 20kg 2.7kg (6 lb)
6kg (12.5 lb)
6” (152mm)
(5
2.7” (69mm) NOMINAL [2.2 TO 3.2” (56-81mm)] (ADJUSTABLE)
.12” (3mm)
3.3” (84mm)
55 lb 25kg
4” (102mm)
4.7” (119mm) NOMINAL [4.2 TO 5.2” (107-132mm)]
.6”(15mm)
CI2520 - 102mm (4”) CI2720 - 152mm (6”)
.12” (3mm)
4” (102mm)
• Adjustable plates for perfect installations • Includes carriage plates • Narrow width to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) .12 Max gate weight: 680kg (1,500 lb) / 1,000kg (2,200 lb) (13mm)
4” (102mm)
4.4” (112mm) NOMINAL [3.5 TO 5.2” (89-132mm)] (ADJUSTABLE)
8” (203mm)
2” (51mm)
6” (152mm)
7.4” (188mm) NOMINAL 3.3” [(6.5 TO 8.2” (165-208mm)] (84mm)
1.1” (28mm)
.6” (15mm) .12 (13mm)
.7” (18mm) 6” (152mm)
DDTECH.COM
SHUTIT® GATE WHEEL
90°
91
The HardCore™ Carriage Plate in Steel/Aluminium CODE
FINISH
FIXING
PLATE
HEIGHT INCH/MM
WEIGHT LB/KG
CI2140
Zinc
Weld
Steel
102mm (4”)
1kg (2 lb)
CI2160
Zinc
Weld
Steel
152mm (6”)
1.6kg (3.5 lb)
CI2140A
Unfinished
Weld
Aluminium
102mm (4”)
1kg (2 lb)
CI2160A
Unfinished
Weld
Aluminium
152mm (6”)
1.6kg (3.5 lb)
• Adjustable plates for perfect installation • Models for 102mm (4”) and 152mm (6”) wheels • Available in steel and Aluminium • No need for bulky and heavy wheel boxes • 3mm (1⁄2“) plate thickness • Combine with carriage caps for chain link applications
8” (203mm)
6” (152mm) 3” (76mm)
.12” (3mm) THICKNESS
3.2” (81mm)
4” (102mm)
2.2” (56mm) 4” (102mm) 5.2” (132mm)
3.5” (89mm) 6” (152mm)
.12” THICKNESS (3mm)
.7” (18mm) SLOT
.6” (15mm)SLOT
The HardCore™ Carriage Cap CODE
FINISH
FIXING
PLATE
HEIGHT INCH/MM
CI2340
Zinc
Weld
Steel
6” (152mm)
1 lb (0.5kg)
CI2360
Zinc
Weld
Steel
8” (203mm)
1.5 lb (0.7kg)
.14” (3mm) 6” (152mm)
R .95” (24mm)
1.9” (48mm) .9” (23mm)
CI2340 - 152mm (6”) CI2360 - 203mm (8”) • Designed to be used with V-Groove Wheels • Combines with carriage plates for round rail • Perfect chainlink gate solution .14” (3mm) • Made from high strength steel • 102mm (4") wheel carriage cap • 152mm (6") wheel carriage cap • Welding instructions page 71
2.2” (56mm)
R .95” (24mm)
8” (203mm)
4” (102mm) 3.1” 79mm
2.2” (56mm)
92
SHUTIT® GATE WHEEL
WEIGHT LB/KG
DDTECH.COM
The 102mm (4”) Cantilever Wheel Assembly
1
2
CODE
3
FINISH
4
FIXING
MAX GATE WEIGHT
155lb WHEEL 70 kg
PLATE
CI2240
Zinc
Weld
680kg (1,500 lb)
Steel
Steel
66 lb WHEEL 44 lbWEIGHT 30kg DIAMETER20kgLB/KG 102mm (4”)
55 lb 25kg
2.3kg (5 lb)
1.1” (28mm) .7” (mm18) 90°
1.9” (48mm) ADJUSTMENT RANGE
4” (102mm)
5” (127mm)
1.48” (38mm)
1.9” (48mm) ADJUSTMENT RANGE
CI2240 • Adjustable plates for perfect installations • Narrow width reduces friction and debris • Super-hard cold rolled steel (30RC rating) • Maximum gate weight: 680kg (1,500 lb)
.75” (19mm)
2.5” (64mm)
1.5” (38mm)
2.1” (53mm) 2.7” (69mm) 2.9” (74mm)
The 152mm (6”) Cantilever Wheel Assembly
1
2
CODE
3
FINISH
4
FIXING
MAX GATE WEIGHT
155 lb WHEEL 70 kg
PLATE
CI2260
Zinc
Weld
680kg (1,500 lb)
Steel
Steel
66 lb WHEEL 44 lbWEIGHT 30kg DIAMETER20kgLB/KG 152mm (6”)
55 lb 25kg
4.8kg) (10.5 lb)
1.1” (28mm) .7” (18mm) 90°
1.9” (48mm) ADJUSTMENT RANGE
CI2260
6” (152mm)
• Adjustable plates for perfect installations • Narrow width reduces friction and debris • Super-hard cold rolled steel (30RC rating) • Maximum gate weight: 680kg (1,500 lb)
5” (127mm)
1.5” (38mm)
1.9” (48mm) ADJUSTMENT RANGE
.75” (19mm) 2.1” (53mm) 2.7” (69mm) 2.9” (74mm)
DDTECH.COM
2.5” (64mm)
1.5” (38mm)
SHUTIT® GATE WHEEL
93
.4” (10mm)
5.4” (137mm)
3.2” (81mm)
5.1” (130mm)
1.5” (38mm) 8” (203mm)
CI2300 - 152mm (6”) Gate-Guide Assembly CI2350 - 254mm (10”) Gate-Guide Assembly • Ideal for gates without grade variation • Replaces the industry standard guide-rollers • Simply attach Guide Assembly to the end-post • Super hard steel • Zinc finish
6” (152mm)
.75” (19mm)
1.4” (36mm) 2 PL
The Gate-Guide Assembly CODE
FINISH
FIXING
1.7” (43mm)
.4” (10mm)
MATERIAL
WEIGHT LB/KG
CI2300
Zinc
Weld
Steel
1.8kg (4 lb)
CI2350
Zinc
Weld
Steel
2kg (4.5 lb)
1.6” (41mm)
1.5” (38mm)
8” (203mm) 6” (152mm)
7” (178mm) 2” (51mm)
5
3” (76mm)
1.6” (41mm)
Full Cantilever Gate System - built-In .75” (19mm)
GATE SYSTEM SPECIFICATIONS ATE SYSTEM SPECIFICATIONS 1
6 2
4
2A 3
7 4” (102mm)
1
Fence Line
2
Two Posts: 3 x 3 x 3⁄16” (76x76x5mm), 4 x 4 x 3⁄16” (102x102x5mm) 1 post at fence height – 1 post 24” (610mm) above grade
2A
Connect two posts with rail 6.5” (165mm) up from grade (can be used for operator mount)
3
Cantilever bracket with 3” (76mm) extensions (2 total)
4
Gate frame with cantilever rail can be used as part of frame
5
2.5 x 2.5 x 3⁄16“ (64 x 64 x 5mm) continuous angle weld for guide
6
Counsel guide weld to guide post
7
For Cantilever wheel assemblies: Use CI2240 for 4” (102mm) wheels and CI2260 for 6” (152mm) wheels
6.5” (165mm)
36” (914mm)
From 5' to 20' (127mm – 508mm ) Max Opening Fence Line
1
3
94
SHUTIT® GATE WHEEL
3.8” 3.5” (89mm) (97mm)
4
2
DDTECH.COM
2A
2
6
5
Full Cantilever Gate System: 4-Wheel System 6.25” (159mm) 2” (51mm)
GATE SYSTEM SPECIFICATIONS
3” (76mm)
3
2” (51mm)
1 2
4
1
Fence Line
2
Two Posts: 3 x 3 x 3⁄16” (76x76x5mm), 4 x 4 x 3⁄16” (102 x 102 x 5mm), or 6 x 6 x 3⁄16” (152 x 152 x 5mm)
2A
Connect two posts with rail (can be used for operator mount)
3
Weld four Cantilever wheel assemblies to post
4
Weld or bolt 2 x 2 Cantilever rails to gate frame
5
Gate frame with support panel posts 3 x 3” (76x76mm) – up to 12” (3,658 mm) opening 4 x 4” (102 x 102mm) – up to 22” (6,700mm) opening 6 x 6” (152 x 152mm) – over 22” (6,700mm) opening Support panel length up 12” (3,658mm) opening
6
For cantilever wheel assemblies: use CI2240 for 4” (102mm) wheels and CI2260 for 6” (152mm) wheels
Fence Height 2A 4 5
From 5' to 20' (127mm – 508mm ) Max Opening
12” (305mm)
6
Fence Line 1
2” (51mm)
5
36” (914mm)
3
3
3 2
4
2
2A
Full Cantilever Gate System: Weld-On/Bolt-On Rail 8” (203mm)
GATE SYSTEM SPECIFICATIONS
6 1.5” (38mm)
1
3” (76mm)
7
2
5 Fence Height
4
3
2A
1
Fence Line
2
Two Posts: 3 x 3 x 3⁄16” (76x76x5mm), 4 x 4 x 3⁄16” (102x102x5mm) 1 post at fence height – 1 post 24” (610mm) above grade
2A
Connect two posts with rail 6.5” (165mm) up from grade (can be used for operator mount)
3
Cantilever bracket with 2.5” (64mm) extensions (2 total)
4
Weld or bolt Cantilever rails to gate frame
5
Gate frame
6
2.5 x 2.5 x 3⁄16“ (64 x 64 x 5mm) continuous angle weld for guide
7
Weld Guide Assembly CI2300 or CI2350 (extended version) to guide post
8
For Cantilever wheel assemblies: Use CI2240 for 4” (102mm) wheels and CI2260 for 6” (152mm) wheels
8 4” (102mm)
6.5” (165mm)
Fence Line
From 5' to 20' (127mm – 508mm ) Max Opening
1
5 36” (914mm)
4
3 2
DDTECH.COM
2A
2
7
6
SHUTIT® GATE WHEEL
4
95
Powder coated quality Wood gate latches and hinges feature thickergauge steel to enhance strength and durability. Superior, corrosion resistant finish, with no rough edges. The hinges feature polymer bearings to prevent binding.
96
WOOD GATE HARDWARE
DDTECH.COM
Powder-coated latches, hinges and accessories for wood gates
• Thicker-gauge steel improves overall strength and durability • Patented polymer bearings and high-tech lubricants prevent binding • Superior strength and appearance – no rough edges • Superior powder-coated finish (highly corrosion resistant) • Fully treated screws included, with a proprietary, corrosion-resistant finish • Screw heads have additional powder-coated weatherproofing Please Note: Because of the drop shadows, transparent backgrounds and PMS colours • Striker-bolt prevents bolt from slipping through the latch the icons need to be AI files to head work in Indesign. • Hinges will not bind (powder-coated before assembly) If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
CODE
MODEL / FEATURE
GATE MATERIAL
SOLD AS
210001
Regular Gravity Latch
Wood/Vinyl
Single
210002
Heavy Duty Gravity Latch
Wood/Vinyl
Single
210007
HD Gravity Latch/Cable and O-ring
Wood/Vinyl
Single
210003
Standard Post Latch
Wood/Vinyl
Single
210004
Thumb Latch
Wood/Vinyl
Single
210005
Side Bolt Latch
Wood/Vinyl
Single
210006
Contemporary Post Latch
Wood/Vinyl
Single
220001
Round Rail Loop latch
Wood
Single
310001
203mm (8”) T-Hinge Regular Decorative
Wood/Vinyl
Pair
310002
203mm (8”) Strap Hinge Regular Decorative
Wood/Vinyl
Pair
310003
254mm (10”) T-Hinge Heavy Duty Traditional
Wood/Vinyl
Pair
310004
203mm (8”) T-Hinge Heavy Duty Traditional
Wood/Vinyl
Pair
310005
254mm (10”) Strap Hinge Heavy Duty Traditional
Wood/Vinyl
Pair
310006
203mm (8”) Strap Hinge HD Traditional
Wood/Vinyl
Pair
310007
203mm (8”) T-Hinge Heavy Duty Contemporary
Wood/Vinyl
Pair
310008
203mm (8”) Strap Hinge Contemporary
Wood/Vinyl
Pair
310009
203mm (8”) Butterfly Hinge Contemporary
Wood/Vinyl
Pair
310010
203mm (8”) Butterfly Hinge Traditional
Wood/Vinyl
Pair
410001
280mm (11”) Gate Spring
Wood/Vinyl
Single
410002
355mm (14”) Gate Spring
Wood/Vinyl
Single
410003
608mm (24”) Drop Bolt
Wood/Vinyl
Single
410004
762mm (40”) Drop Bolt
Wood/Vinyl
Single
410005
Gate Handle
Wood/Vinyl
Single
420001
Gate Anti-sag Kit
Wood
Single
Customized wood gate hardware Kits available (USA only). Email: Customerservice.ddtech.us@assaabloy.com for US pricing.
DDTECH.COM
WOOD GATE HARDWARE
97
210001 – Regular Gravity Latch
(
0.2" 5.20mm)
(
0.2" 5.20mm)
5.1" (130mm)
1" (25.40mm)
1.3" (35mm)
2.2" (55mm)
210002 – Heavy Duty Gravity Latch 210007 – With Cable and O-ring (
0.2" 5.7mm)
2.8" (71mm)
(
0.2" 6mm)
2.4" (62mm)
4.2" (105mm)
2.8" (70mm)
7.3" (185mm)
210003 – Standard Post Latch 10.7" (273mm)
2.1" (54mm)
1" (23mm)
6.2" (159mm)
2.3" (59mm)
210004 – Thumb Latch
0.1" (3.4mm)
2.2" 11" (55mm) (280mm)
3" (77mm)
0.2" ( 5.3mm)
0.8" (20mm)
98
WOOD GATE HARDWARE
DDTECH.COM
3.2" (81.8mm)
210006 – Contemporary Post Latch 6.3" (161mm)
9.6" (245mm)
1.8" (48mm)
8.9" (226mm)
0.3" ( 8.40mm)
0.2" (R4.40mm)
0.3" (8.60mm)
410003 – 24” Drop Bolt • 410004 – 40” Drop Bolt
24" (609mm)
.95” (23.88mm)
3.4" (88.5mm)
1.6" (42mm)
1" (25.40mm)
1.6" (42mm)
1.1" (28mm)
2" (51mm)
Lorem ipsu
0.6” (ø 15mm)
410001 – 11” Gate Spring • 410002 14” Gate Spring
1" (25.4mm)
1.5" (38mm) 11.7" (297mm)
220001– Round Rail Loop latch • 420001– Anti-sag Kit 0.4" ( 9.5mm)
7.2" (183mm)
5" (126mm)
5.7" (145mm)
0.3" ( 8.1mm)
DDTECH.COM
6" (152mm)
0.2" (R4.10mm)
WOOD GATE HARDWARE
99
310001 – 8” T-Hinge Regular Decorative
5.5" (140mm)
0.5" (14mm)
0.1" (3mm)
(
0.3" 6.7mm)
9.7" (247mm)
310002 – 8” Strap Hinge Regular Decorative
3.1" (80mm)
0.6" (14.5mm)
(
0.2" 6.7mm) 0.1" (3mm)
15.4" (392mm)
310003 – 10” T-Hinge HD Traditional 310004 – 8” T-Hinge HD Traditional
3" ) 0. mm 0 .4
(8
12.7"
0.118" (3mm)
(8
.4 0.3" 0m m )
10" (254mm)
(321mm)
0.7" (18mm)
(8
.4 0.3" 0m m )
310005 – 10” Strap Hinge HD Traditional 310006 – 8” Strap Hinge HD Traditional
8" (200mm)
10" (250mm)
0.7" (18mm) 16" (400mm)
20" (508.20mm)
100
WOOD GATE HARDWARE
DDTECH.COM
0.1" (3mm)
310007 – 8” T-Hinge HD Contemporary
7.2" (185mm)
3" ) 0. mm .4 (8
0.5" (14mm)
10.4" (265mm)
(8
.3
0. 8m 3" m )
5.1" (129mm)
310008 – 8” Strap Hinge Contemporary
0.5" (14mm)
8" (194mm) 16" (407mm)
310009 – 8” Butterfly Hinge Contemporary
4.8" (123mm)
0.5" (14mm) 0.1" (2.4mm)
2" (52mm)
7.2" (185mm)
3" ) 0. mm .4 (8
0.5" 310010 – 8” Butterfly Hinge Traditional (14mm)
0.7" (18mm)
.4 0.3" 0m m )
1.6" (41mm)
(8
4.2" (107mm)
10.4" (265mm)
0.1" (3mm)
DDTECH.COM
WOOD GATE HARDWARE
101
Wood & vinyl gate hardware Our quality, powdercoated gate latches and hinges are finely finished, with no rough edges. The range features thicker-gauge steel to enhance strength and durability and hinges have polymer bearings to prevent binding.
102
STAINLESS STEEL
DDTECH.COM
Fully powder-coated hinges and latches for wood or vinyl gates
Please Note: Because of the drop shadows, transparent backgrounds and PMS colours the icons need to be AI files to work in Indesign. If changes are made they need to be saved as AI and EPS and exported as PNG formats for other applications if needed.
• Marine-grade, powder-coated finish (no unfinished surfaces) • D&D branding means authentic quality! • Self-closing, tension-adjustable hinges (plain pivot models also available) • Regular and Heavy-Duty models in black or white finish • Side fixing legs offer quick alignment, installation & added strength • Stainless steel, self-drilling screws specifically for vinyl included • Tension-adjustment tool included • Maximum self-closing gate weight 30kg (66lbs) • Standard and contemporary designed post latches
CODE
MODEL / FEATURE
SIDE FIXING LEGS
GAP VARIANCE
Colour
FASTENERS INCLUDED
SOLD AS
DDSHDSS
Heavy Duty Hinge – No spring, plain pivoting
Standard to Standard
16–60mm (5⁄8”–23⁄8”)
Black
Self-drilling 410 Stainless Steel
Pair
DDS2HSSA
Regular Hinge – Self-closing, tension adjustable
Standard to Standard
16–30mm (5⁄8”–13⁄16”)
Black
Self-drilling 410 Stainless Steel
Pair
DDS2HNNA DDS2HNNAW
Regular Hinge – Self-closing, tension adjustable
Narrow to Narrow
16–30mm (5⁄8”–13⁄16”)
Black/ White
Self-drilling 410 Stainless Steel
Pair
DDSHSN
Regular Hinge – No spring, plain pivoting
Standard to Narrow
16–45mm (5⁄8”–13⁄4”)
Black
Self-drilling 410 Stainless Steel
Pair
DDS2HSNA DDS2HSNAW
Regular Hinge – Self-closing, tension adjustable
Standard to Narrow
16–30mm (5⁄8”–13⁄16”)
Black/ White
Self-drilling 410 Stainless Steel
Pair
DDSHSS
Regular Hinge – No Spring, plain pivoting
Standard to Standard
16–45mm (5⁄8”–13⁄4”)
Black
Self-drilling 410 Stainless Steel
Pair
DDS2HNW3A DDS2HNW3AW
Regular Hinge – Self-closing, tension adjustable
Narrow to Wrap 2”
16–30mm (5⁄8”–13⁄16”)
Black/ White
Self-drilling 410 Stainless Steel
Pair
DDSL2 DDSL2W
Standard Post Latch
Standard to Narrow
19–38mm (3⁄4”–11⁄2”)
Black/ White
Self-drilling 410 Stainless Steel
Each
DDSLM
Contemporary Post Latch
Standard to Narrow
19 – 50mm (3⁄4”–2”)
Black
Self-drilling 410 Stainless Steel
Each
DDS2HNNA
DDS2HSNA
DDS2HSSA
DDSLM
Narrow to Narrow
Standard to Narrow
Standard to Standard
Standard to Narrow
DDTECH.COM
STAINLESS STEEL
103
DDSHDSS Heavy Duty Hinge. No spring, plain pivoting. Standard to Standard. 3.15” (80mm)
0.25” (7mm)
3.15” (80mm)
4.57” (116mm)
0.57” (17mm) 7.16” (182mm)
3.5” (89mm)
GAP VARIES ACCORDING TO NUT PLACEMENT
DDS2HSSA Regular Hinge Self-Closing, tension adjustable. Standard to Standard.
[90mm] 3½”
[7mm] ø¼”
[16mm] ⅝” GAP VARIES ACCORDING TO NUT POSITION
[32mm] 1¼”
[81mm] 3¼”
[81mm] 3¼”
[112mm] 4⅜”
[91mm] 3⅝”
[91mm] 3⅝”
DDS2HNNA/DDS2HNNAW Regular Hinge. Self-closing, tension adjustable. Narrow to Narrow.
1.25” (31.5mm) 2.58” (65.5mm)
104
STAINLESS STEEL
DDTECH.COM
7.9” (201.5mm)
1.34” (34mm)
1.32” (33.5mm)
3.52” (89.5mm)
ø 0.25” 6.5mm
GAP VARIES DEPENDING ON NUT POSITION 0.6” (15mm)
3.58” (91mm)
3.56” (90.5mm)
7” (179mm)
1.38” (35mm)
3.5” (89mm)
DDSHSN Regular Hinge. No spring, plain pivoting. Standard to Narrow.
ø 0.25” (7mm) 0.55” (14mm)
3.15” (80mm)
GAP VARIES ACCORDING TO NUT PLACEMENT
DDS2HSNA/DDS2HSNAW Regular Hinge. Self-closing, tension adjustable. Standard to Narrow.
4.43” (112.5mm)
7.90” (201.5mm)
1.32” (33.5mm)
1.24” (31.5mm)
3.2” (81mm)
3.5” (89.5mm)
ø.25” (6.5mm)
0.6” (15mm)
3.57” (90.5mm)
GAP VARIES DEPENDING ON NUT POSITION 3.6” (91mm)
7.25” (184mm)
3.15” (80mm)
3.5” (89mm)
DDSHSS Regular Hinge. No spring, plain pivoting. Standard to Standard.
ø 0.25” (7mm)
0.75” 3.15” (19mm) (80mm) GAP VARIES ACCORDING TO NUT POSITION
DDTECH.COM
STAINLESS STEEL
105
DDS2HNW3A/DDS2HNW3AW Regular Hinge. Self-closing, tension adjustable. Standard to 51mm (2”) wrap-around
2” (51mm)
POST BRACKET
3.5” (89.5mm)
3.25” (82.5mm)
ø 0.25” (7mm)
DDSL2/DDSL2W Standard Post Latch. Standard to Narrow.
5 17/32” (140.5mm)
4 17/64” (108.5mm)
9 11/64” (232.8mm)
DDSLM Contemporary Post Latch. Standard to Narrow. 8 7/8" (226mm)
5 3/4" (147mm)
3 1/2" (89mm)
1/4" (7mm)
9/16" (15mm) GAP VARIES
106
STAINLESS STEEL
DDTECH.COM
Pool Gate Safety Checklist My gate is self-closing and self-latching, including a child safety lock My gate opens outwards, away from the pool zone My gate shuts securely from any open angle or force My latch release knob is at least 1500mm (59") above ground level My latch release knob is at least 1400mm (55") above the lower foot hold My latch cannot be key locked in the “open” position My latch cannot be disengaged using implements or shaking My self-closing hinges are rust-free and bind-free My self-closing hinges are tension-adjustable, and operating correctly My pool zone is free from objects or structures that can be climbed on My pool fence and gate are at least 1200mm (47") high My pool fence’s picket/post gap is less than 100mm (4") My regulation CPR sign, attached in my pool area, visible from 3m (9ft) My gate complies with the latest Australian Standards for pools IMPORTANT: Information above is supplied and expressed by D&D Technologies in the interests of consumer and public safety. For specific details or copies of Australian Standards relating to gate and fence safety please contact Standards Australia in your nearest city. In the US, for specific details for fence and gate safety, contact the CPSC. https://www.cpsc.gov/
Proudly supported by
DDTECH.COM
107
• INNOVATION • QUALITY & VALUE • ADVANCED ENGINEERING & MATERIALS • STRATEGIC GLOBAL PARTNERS • VALUE-ADDED CUSTOMER SERVICE & SUPPORT
Global Contact
ISBN 9780648760504
PROMO 194 20/02/25 Copyright© 2025, D&D Group Pty Ltd, Australia. Part of Assa Abloy 108 DDTECH.COM
9 780648 7 6 0 5 0 4 >