Spring 2022 Adult and Continuing Education Schedule

Adult and Continuing Education

Spring 2022 Request newsletters: ldunn@nctc.edu

Register early so classes do not cancel. Tell your friends and neighbors, bring your spouse, and most of all bring yourself and have fun learning!

Table of Contents FINANCIAL INFORMATION WHAT’S NEW THIS FALL PEAT GRANT BILT GRANT GED ESL VOCATIONAL VOCATIONAL ONLINE COMPUTER APPLICATIONS PROFESSIONAL EXAM CERT PREP PERSONAL ENRICHMENT WORKFORCE TRAINING PROGRAM ENROLLMENT AND PAYMENT INFO

3 4 5 6 7 8 9 13-14 15-16 17 16 19 20

REGISTRATION BEGINS JANUARY 3RD! Check it out !

Contact Adult and Continuing Education Gainesville: 940-668-3373 Jessica Carlile Dean of Adult and Continuing Education Dean’s Assistant Kayra Morgan

kmorgan@nctc.edu

ACE Technical Assistant Kedrin Bell

kbell@nctc.edu

Student Service Advisors Brian Carnes, Technical Lori Dunn, Community Ed Scott LeDane, Vocational

bcarnes@nctc.edu ldunn@nctc.edu gledane@nctc.edu

Grant Coordinator Alan Uptergrove

auptergrove@nctc.edu

Students must be 16 or older, anyone under 18 must be accompanied by a parent or guardian.

Our Website, www.nctc.edu/continuing education, serves as the publication of record for the Division of Adult and Continuing Education. The printed schedule serves for information purposes only.

North Central Texas College * Division of Adult and Continuing Education Course Schedule * Bulletin Vol. 76 No. 2, Spring 20 The BULLETIN of North Central Texas College is published six times per year—quarterly January through April, once; May through August, twice; and September through December, three times; however, this schedule is subject to change to coincide with changes in the college calendar. This publication is published by the staff of Adult and Continuing Education under the supervision of the Marketing and Public Relations Department, 1525 W. California Street, Gainesville, TX 76240-4699. It is the policy of North Central Texas College to provide equal employment, admission, and educational and financial aid opportunities without regard to race, color, national origin, religion, sex, age, or disability. In addition, NCTC will make a positive effort to accommodate all reasonable requests for assistance with the Americans with Disabilities Act (940) 668 -4216. Anyone with questions or concerns regarding compliance with Title IX and/or Section 504 should contact the Vice President of Student Services at (940) 668-4240.

FINANCIAL ASSISTANCE/SCHOLARSHIPS

Spring 2022

ADULT & CONTINUING EDUCATION SCHOLARSHIP OPPORTUNITIES ACE is now offering scholarships for qualified professional and workforce training.

We have PAYMENT PLANS! Payment Plans are available for tuition totaling more than $199. One time $30 fee required. Plan requires half down, with two equal payments thereafter.

Payment plans must be set up upon enrollment. Debit cards, credit cards, or ACH withdrawals only.

We have GRANTS! Grants are a way to help pay for technical and vocational workforce programs. ACE now has two grant opportunities for individuals interested in construction or logistics. See pages 5 & 6 for more information.

We have SCHOLARSHIPS! Scholarships are forms of aid that help students pay for some or all of their educational needs. Unlike student loans, scholarships do not have to be re-paid. Listed are a few programs and fees offered through ACE.

1. Students can apply for scholarships by filling out the application form.

2. Completed scholarship applications should be emailed to kmorgan@nctc.edu.

3. Applications will be reviewed by ACE Leadership Core Team 4. Scholarship Students are selected and contacted by ACE Leadership.

PROGRAM

TOTAL COST

SCHOLARSHIP

STUDENT PAY

SHRM ESSENTIALS

$399

$200

$199

SHRM CERTIFIED PROFESSIONAL

$999

$500

$499

CERTIFIED LOGISTICS TECHNICIAN

$599

$300

$299

PMP EXAM PREPARATION

$999

$500

$499

Adult and Continuing Education does not participate in Federal Student Aid. However, we do have scholarships available and you may find assistance through a variety of agencies, such as the Department of Rehabilitative Services and local Workforce Solutions offices.

Spring 2022֎(940) 668-3373֎Gainesville

WHAT’S NEW THIS SPRING!

Spring 2022

Part Time Instructors Wanted for Adult and Continuing Education Earn extra money as a side hustle by teaching part time with ACE. Applicants must apply online! See instructions below.  Go to website at https://www.nctc.edu/.  Very bottom of page light grey ribbon, click on jobs at NCTC.  Search Jobs.  Scroll to find Part Time, Personal Enrichment or position of interest.  Click on Apply for this Job, complete application and submit.

OFFICE HOURS MONDAY—THRUSDAY 8 A.M.—5 P.M. FRIDAY 8 A.M.—12 P.M.

Class Location Legend: ACE BOW COR DEN FLM

Gainesville, Main Campus #200 Bowie Campus Corinth, Main Campus Exchange Denton Flower Mound Campus

Adult and Continuing Education Locations Gainesville (ACE) 200 Building 1525 W. California St., Gainesville, TX 76240 940-668-3373 phone Bowie (BOW) 810 S. Mill St., Bowie, TX 76230

Corinth (COR) 1400 N. Corinth St., Corinth, TX 76208

Spring 2022֎(940) 668-3373֎Gainesville

FSB Exchange at Denton (DEN) 316 E. Hickory St., Denton, TX 76201 Flower Mound (FLM) 1200 Parker Square, Flower Mound, TX 75028

Graham (GRH) 928 Cherry St., Graham, TX 76450

GRANTS

SPRING Spring2022 2022

CONTACT INFO PEAT.nctc.edu Fill out form to learn more!

Alan Uptergrove auptergrove@nctc.edu

Scott Ledane gledane@nctc.edu Ginger Comeaux gcomeaux@dentonisd.org

REQUIREMENTS

Ages 16-24 U.S. Citizens Or Certified To Work In The U.S. Not Currently Employed Not Currently in School or Training

ELECTRICAL APPRENTICESHIP

PLUMBING APPRENTICESHIP

CERTIFICATIONS FOR ELECTRICAL INCLUDE

CERTIFICATIONS FOR PLUMBING INCLUDE

• • • •

Apprentice Registration with TDLR OSHA-10 Safety Card for Construction Arc Flash Certification—DOL Safety Card SACA Smart Alliance Certification

• • • •

Apprentice Registration with TDLR OSHA-10 Safety Card for Construction PHCC Plumbing Academy Certificate Course completion receives 200 hours towards apprenticeship requirement.

Spring 2022֎(940) 668-3373֎Gainesville

GRANTS

SPRING Spring2022 2022

BILT TO SCALE B USINESS I NDUSTRY L EADERSHIP T EAM T O

BE JOB READY IN 4-5 WEEKS! This introduction to supply chain management is a 140 hour online & in-person program that includes hands-on job training and specialized mentorship leading to industry credentials.

CERTIFICATIONS INCLUDE

S C A L E

UPPLY HAIN ND OGISTICS DUCATION

ELIGIBILITY REQUIREMENTS



Certified Logistics Associate (CLA)

√ Must be age 14 or older.



Certified Logistics Technician (CLT)

√ U.S. citizen or certified to work in the U.S.



OSHA 10



Association of Supply Chain Management (ASCM) Certificate and Membership

√ If male, registered for U.S. Selective Service

For more information :

940-668-3373

ace@nctc.edu

IN RECOGNITION OF YOUR HARD WORK… Students who complete the program and gain employment will receive steel-toed boots and a tablet with logistics practice scenarios.

You are also eligible for NCTC scholarships and credit classes for additional training.

Spring 2022֎(940) 668-3373֎Gainesville 3

ADULT BASIC EDUCATION: GED PROGRAM

Spring 2022

North Central Texas College is dedicated to serving students who have a variety of educational needs. Adult and Continuing Education offers several programs to further this mission by offering free courses for GED.

Questions?

Registration: 940-668-3373 Information: 940-498-6433

GENERAL EDUCATION DIPLOMA

Qualifications

Details GED® credential is equivalent to a high school diploma and covers these four subject areas: • Mathematical Reasoning • Reasoning through Language Arts • Science • Social Studies Both English and Spanish GED® tests are available.

 

Must be between the ages of 18 to 25 AND Must have dropped out of a Texas public high school (proof required) OR  Must have signed out of a Texas public high school to be home schooled but did not receive diploma (proof required) OR  Completed 12th grade but did not receive diploma.

GED COMPREHENSIVE

Comprehensive classes prepare students to For Denton County residents!

The North Texas AEL program through Denton ISD hosts GED classes every semester with classes offered in the morning or evening free of charge. For registration and class information contact: Denton: 940-369-0400 www.dentonisd.org

take the GED® test in each of the four subject areas with special emphasis on testing and test taking strategies. (66 hrs.)

GAINESVILLE Course ID: ABE 1000 0101 M &W 2/7/22 to 4/27/22 Room 210 Tuition: $0 Course ID: ABE 1000 0102 M &W 2/7/22 to 4/27/22 Room 210 Tuition: $0

Spring 2022֎(940) 668-3373֎Gainesville

English 6pm to 9pm

Spanish 6pm to 9pm

ADULT BASIC EDUCATION: ESL PROGRAM

Spring 2022

ENGLISH AS A SECOND LANGUAGE

Required Assessments You must take assessments prior to first class date. Below are the dates available for assessments.

Please contact Brian Carnes at 940-498-6446 or Lori Dunn at 940-498-6433 for location information.

Session I: January 18th and 20th 6pm-8pm Session II: March 1st and 3rd 6pm-8pm

Adult and Continuing Education uses Burlington English curriculum to help students begin their English language journey. Burlington English focuses in areas of listening, speaking, reading and writing, with access online anywhere, anytime combined with face to face classroom activities. Students can effectively improve their pronunciation and comprehensibility giving confidence to communicate in any situation(24 hrs.)

NOTE: Gainesville ESL classes will be face-to-face only using Challenger and Life Prints curriculum.

Class Schedules Corinth Tues/Thurs

6pm-8pm

Tuition: $99

Flower Mound Saturday

8am-12pm

Tuition: $99

Gainesville Tues/Thurs

6pm-8pm

Tuition: $0

SESSION I I

SESSION I CORINTH COMG 1000 0401 COMG 1004 0401 COMG 1007 0401

2/1-3/10 (Beginning) (Intermediate) (Advanced)

CORINTH COMG 1000 0402 COMG 1004 0402 COMG 1007 0402

3/22-4/28 (Beginning) (Intermediate) (Advanced)

FLOWER MOUND COMG 1000 0501 COMG 1004 0501 COMG 1007 0501

2/5-3/12 (Beginning) (Intermediate) (Advanced)

FLOWER MOUND COMG 1000 0502 COMG 1004 0502 COMG 1007 0502

3/26-4/30 (Beginning) (Intermediate) (Advanced)

GAINESVILLE ESL 1010 0101 ESL 1012 0101

2/1-3/10 (Beginning) (Intermediate)

GAINESVILLE ESL 1010 0102 ESL 1012 0102 ESL 1014 0102

3/22-4/28 (Beginning) (Intermediate) (Advanced)

Spring 2022֎(940) 668-3373֎Gainesville

VOCATIONAL PROGRAMS

Spring 2022

Certificates in high-demand occupational fields. We offer award -winning programs that lead students to gainful employment.

Students may also qualify for tuition assistance through various agencies.

PROFESSIONAL TRUCK DRIVER I/II In just four weeks, you can be on your way to a new career with the professional truck driving training program. Get hands-on skill development and instruction coordinated with the U.S. Department of Transportation.

To qualify  Must be 21 years or older.  Must provide proof of HS Diploma/ GED.  Have an acceptable driving record,  Complete and pass a Department of Transportation Physical Exam.  Have the ability to read, write and speak English.  Meet the requirements of the Motor Carrier Federal Safety Regulations.

Qualifications of Drivers classes are offered every other Monday, and tuition includes physical, licensing, and books.

ELECTRICAL TECHNICIAN If you're looking for a stable career that is important in the everyday lives of people around you, this course could be just right for you. This hybrid course has an emphasis on industrial maintenance environments and provides an intensive overview of the skills necessary for electrical maintenance, including math, inspection, safety, quality, electrical systems, automation, motor controls, and assembly. This accelerated section of the online course will take around 66 hours to complete and is offered through our JobReady education partner. Along with the online portion, you will also receive 44 hours of hands-on experience from a licensed electrician teaching you some of the basic construction electrical skills you will need to start a job in the electrician career field. You will learn everything from bending conduit to installing a breaker box.

Tuition assistance through Texas Workforce Commission available if you qualify.

There are no prerequisites for this course and should take 110 hours to complete. Once competed, you will qualify for the electrical systems certification exam through SACA.

CORINTH Course ID: CVOP 1013 0401 Open Start Date

GAINESVILLE Course ID: ELPT 1051 0101 Start Date: January 11th

Fee: $5,000.

Fee: $499

North Central Texas College, Adult and Continuing Education Department invites applicants from individuals in teaching non-credit classes.

Classes can be located at each of our six campuses and vary in length and starting dates.

Spring 2022֎(940) 668-3373֎Gainesville

VOCATIONAL PROGRAMS—ONLINE

HVAC/R TECHNICIAN The HVAC/R Technician course is a self-paced, instructor supported online course that will prepare you for an entry-level career in the HVAC/R industry by providing hands-on guidance for service, repair, and solutions.

This course will provide the necessary information to pass the following entry-level certificate exams: • HVAC Excellence ESCO Group: 17 Employment Ready Certificates • NATE: Ready to Work Certificate • EPA 608: Section 608 Universal Technician Certification Upon course completion, you will also receive a voucher package for the HVAC Excellence Employment Ready Certificate exam* that includes: • 1 Employment Ready Certificate for Electrical • 1 Employment Ready Certificate for Air Conditioning • 1 EPA 608 Voucher It is recommended you have a high school diploma or GED. This course offers instructor support and takes approximately 162 hours to complete where you will be given 12 months to complete online.

Tuition support through the Texas Workforce Commission to those who qualify.

Fee $2,895.

For more information go to link: https://careertraining.ed2go.com/nctc/trainingprograms/hvacr-technician/?Category=constructionand-trades

Spring 2022

CERTIFIED LOGISTICS TECHNICIAN The Certified Logistics Technician (CLT) ® certification program is to recognize, through certification, individuals who demonstrate mastery of the core competencies of material handling at the front-line (entry-level to front-line supervisor). (70 hrs.) Online The CLT program consists of two parts: • Foundational-Level Certified Logistics Associate (CLA) ® Certificate • Mid-Level Technical CLT Certification (CLT)

The CLA section provides students with the foundational broad knowledge they will need to understand the world of supply chain and related core competencies.

The CLT section provides students with the mid-level technical knowledge needed to understand the world of supply chain logistics and related core competencies.

Upon successful completion, you will be awarded the nationally recognized CLT certification through the Manufacturing Skill Standards Council.

Fee: $599 For more information go to link: https://www.msscusa.org/certified-logistics-technician -clt/

Adult and Continuing Education is always looking for qualified instructors in healthcare fields, computer applications, business, and special interests.

Spring 2022֎(940) 668-3373֎Gainesville

VOCATIONAL PROGRAMS-ONLINE ENTREPRENEUR BASICS Considering owning your own small business?

Want to know some of the basics of being an Entrepreneur? North Central Texas College, in partnership with Denton ISD Adult Education and Literacy, is proud to offer a personal enrichment course in Entrepreneur Basics.

Learn how to create a business plan, including assessing business feasibility and prepare the management and financial plans. Take home a step by step approach to attract and keep customers, with an emphasis on customer-driven marketing decisions and building a strong brand.

Some students may qualify for tuition assistance through Denton AEL. To see if you qualify, contact Ginger Comeaux at 940-3690400, gcomeaux@dentonisd.org.

For more information contact: Scott LeDane gledane@nctc.edu 940-668-4911

Spring 2022 MECHATRONICS (Electro-Mechanical Tech) The Mechatronics course is a self-paced, online course that provides an intensive overview of the skills necessary for the mechatronics industry. You will learn math, inspection, safety, quality, electrical systems, automation, mechanical systems, fluid systems, pneumatic systems, and robotic systems in Mechatronics.

Electro-mechanical technicians operate, test, and maintain unmanned, automated, robotic, or electromechanical equipment. (140 hrs.)

This course is given in partnership with Denton Adult Education and Literacy program.

Contact Denton AEL at 940-369-0410 to see if you qualify for tuition funding through their program.

The AEL program will have a class start date established in January 2022 and operate as a hybrid course (part on-line, part in classroom).

RESIDENTIAL ELECTRICIAN Discover a self-paced, instructor supported, online course designed to teach you general and electrical safety procedures, use of common hardware and materials used in an electrical system, how to read and understand building plans, and more. In addition, you will be prepared for electrician licensing tests.

By course completion, you should be able to pass a residential electrician licensing exam and start an entry level career as a residential electrician or electrician apprentice. (144 hrs.)

Online

FOR MORE INFORMATION ABOUT

There are no prerequisites for this course but it is recommended you have some knowledge of direct and alternating currents.

OUR ONLINE COURSES GO TO:

Fee: $2,495

https://www.nctc.edu/adult-

For more information go to link: https://careertraining.ed2go.com/nctc/trainingprograms/residential-electrician/?

continuing-education/online-career -training-programs.html

Spring 2022֎(940) 668-3373֎Gainesville

VOCATIONAL PROGRAMS-ONLINE

Spring 2022

ADVANCED MANUFACTURING TECHNICIAN Advanced manufacturing technicians perform many important tasks such as product assembly, machine operation, and quality assurance.

Advanced manufacturing technicians play a key role in the manufacture of many commercial products. Employment of advanced manufacturing technicians is projected to grow 4 percent from 2012 to 2022. (90 hrs.. 12 months to complete.)

Certification exam included in tuition.

Fee: $249 For more information go to link: https://www.journeyed.com/item/180+Skills/ Skilled+Trades/1873687? ref=also_viewed_product&product_id=

MECHATRONICS (Electro-Mechanical Tech) The Mechatronics course is a self-paced, online course that provides an intensive overview of the skills necessary for the mechatronics industry. You will learn math, inspection, safety, quality, electrical systems, automation, mechanical systems, fluid systems, pneumatic systems, and robotic systems in Mechatronics. Electromechanical technicians operate, test, and maintain unmanned, automated, robotic, or electromechanical equipment. (140 hrs.)

Fee: $249 For more information go to link: https://www.journeyed.com/item/180+Skills/ Skilled+Trades/1873685?

OSHA 10 Introduction to specific training techniques involving the safe handling of blood and air borne pathogens as well as general safety, proper use of PPE, and security on the premises. Addresses the right to know and SDS. Outlines Occupational Safety and Health Administration (OSHA) regulations, inspections, penalties, and compliance.

Upon successful completion, you will be issued a DOL OSHA10 safety card.

Contact Scott LeDane at 940-668-7731 ext. 4911 to sign up for this course.

CNC LATHE TECHNICIAN Computer numerical control (CNC) lathe production technicians transform raw materials into finished products used in commercial, automotive, medical, and aerospace products.

CNC lathe production technicians produce parts that range from simple bolts of steel to titanium bone screws for orthopedic implants. CNC lathe production technicians work from blueprints, or computer-aided design (CAD), and computer-aided manufacturing (CAM) files. (132 hrs.,12 months to complete.)

Fee: $249 For more information go to link: https://www.journeyed.com/item/180+Skills/ Skilled+Trades/1873686? ref=also_viewed_product&product_id=

QUALITY ASSURANCE TECHNICIAN When products like cell phones, computers or automobiles leave the factory, it's the quality assurance technician who makes sure they work. Also known as inspectors or testers, quality assurance technicians work on a wide range of challenging projects across multiple industries. (140 hrs., 12 months to complete.)

Certification exam included in tuition.

Fee: $249

SAFETY TECHNICIAN Safety technicians collect data on the safety and health conditions of the workplace. Safety technicians work with occupational health and safety specialists in conducting tests and measuring hazards to help prevent harm to workers, property, the environment, and the general public. Safety technicians work in a v ariety of settings, such as offices, manufacturing facilities, and mines. (108 hrs., 12 months to complete.)

Fee: $249

Spring 2022֎(940) 668-3373֎Gainesville

Spring 2022

COMPUTER APPLICATIONS

Our Computer Applications classes offer students the opportunity to learn Beginning and Intermediate computer skills including Microsoft Excel, Word and Power point and other valuable topics in a relaxed setting.

INTRODUCTION TO COMPUTER SKILLS

COMPUTER BASICS

Don’t let your computer intimidate you…

Little or no experience with computers? Then

BOWIE Course ID: ITSC 1012 0701 M&W 4/4 to 4/27 6 pm-8:30 pm Fee: $ 139 Deadline: 3/28

GRAHAM Course ID: COM 1025 0801 Monday 2/7 2pm to 4pm or 6pm to 8pm GRM D1 Fee: $29 Deadline: 1/24

instead, learn all that you can to tell it “who’s boss.” Understand computer application specific software. Tuition includes textbook.

(20 hrs.) Hybrid

CORINTH Course ID: ITSC 1012 0401 M&W 2/21 to 3/23 6 pm-8:30 pm Fee: $ 139 Deadline: 2/14

GAINESVILLE Course ID: ITSC 1012 0101 M&W 3/21 to 4/20 6 pm-8:30 pm Fee: $ 139 Deadline: 3/7

COMPUTERS FOR ESL STUDENTS Discover computer systems and their uses in today’s business communities. Tuition includes textbook. (24 hrs.) Hybrid CORINTH Course ID: ITSC 1012 0401 Saturday 3/26 to 4/30 8 am to 12 pm Fee: $159 Deadline: 3/12

INTRODUCTION TO KEYBOARDING Great for beginner, or experienced typists that need to quickly improve typing speed and accuracy by 15-30 wpm. Tuition includes textbook. (8 hrs.) Hybrid

this “hands-on” class is for you. Understand terminology and basic parts. Two time slots available for your convenience. (2 hrs.)

COMPUTER USER SUPPORT SPECIALIST Introduction to computer system uses and operations. Program consists of four courses.

Students can enroll in individual courses or in all four to work towards earning a program certificate of completion.

Please contact an ACE student services advisor prior to enrolling in the program.

POFT 1010 Introduction to Keyboarding (8 hours) ITSC 1012 Introduction to Computer Skills (20 hours) CPMT 2050 CompTIA A+ Certification Preparation (48 hours) ONL 1000 Customer Service Fundamentals (24 hours)

CORINTH Course ID: POFT 1010 0401 M&W 2/7 to 2/16 6 pm to 8 pm Fee: $75 Deadline: 9/11 Spring 2022֎(940) 668-3373֎Gainesville

COMPUTER APPLICATIONS

MICROSOFT EXCEL LEVEL 1

Spring 2022

MICROSOFT WORD LEVEL 1

Beginner-level coverage of Excel 2019 and 365. (8 hrs.)

Beginner-level coverage of Word 2019 and 365. (8 hrs.)

BOWIE Course ID: ITSW 1022 0701 T & TH 3/22 to 3/24 6 pm to 9 pm Fee: $79 Deadline: 3/8

BOWIE Course ID: POFI 1024 0701 T & TH 4/19 to 4/21 6 pm to 9 pm Fee: $79 Deadline: 4/12

MICROSOFT EXCEL LEVEL II

MICROSOFT POWER POINT LEVEL 1

Intermediate-level coverage of Excel 2019 and 365. (8 hrs.)

Beginner-level coverage of Power Point 2019 and 365. (8 hrs.)

BOWIE Course ID: ITSW 1046 0701 T & TH 3/29 to 3/31 6 pm to 9 pm Fee: $79 Deadline: 3/22

BOWIE Course ID: ITSW 1037 0701 T & TH 4/26 to 4/28 6 pm to 9 pm Fee: $79 Deadline: 4/19

MICROSOFT EXCEL LEVEL III Advanced-level coverage of Excel 2019 and 365. (8 hrs.)

BOWIE Course ID: ITSW 2049 0701 T & TH 4/5 to 4/7 6 pm to 9 pm Fee: $79 Deadline: 3/29

Want to take a class but don’t see it listed? Let us know what you need!

940-498-6446

Spring 2022֎(940) 668-3373֎Gainesville

PROFESSIONAL EXAM CERTIFICATION PREPARATION

COMPTIA A+ CERTIFICATION PREPARATION CompTIA A+ is a collection of two Certification pathways, comprised of instruction leading to jobs and careers in the field of IT Systems and Networking. (48 hrs.)

Hybrid CORINTH Course ID: CPMT 2050 0401 M/T/W 3/28 to 5/02 6 pm to 9 pm

PROJECT MANAGEMENT (PMP) EXEXAMINATION PREPARATION Students will learn and review project management tools and methods to prepare for the Project Management Professional (PMP) Certification Exam. (36 hrs.) Online Synchronous CORINTH Course ID: BMGT 0401 Monday 2/14 to 5/09 6 pm to 9 pm Fee: $999 Deadline: 2/7

Spring 2022

SOCIETY FOR HUMAN RESOURCE MANAGMENT(SHRM) CERTIFICATION PREPARATION Understand and review major concepts, theories, and their applications to prepare for the Society for Human Resource Management Certification Exam (SHRM) (36 hrs.) Online synchronous.

CORINTH Course ID: HRPO 2030 0401 Monday 1/24 to 4/18 6 pm to 9 pm Fee: $999 Deadline: 1/10

SCHOLASTIC APTITUDE TEST/ AMERICAN COLLEGE TEST (SAT/ACT) PREPARATION PROGRAM Online-Ed2Go Both the ACT and the SAT contain verbal and math question types. Part I gives all the information needed to do well on the verbal questions. Part II gives all the information needed to do well on the math questions that will test your knowledge of arithmetic, algebra, geometry, trigonometry, and basic statistics. Series bundles are not eligible for partial drops or refunds.

Start Dates* | Jan 12 | Feb 09 | Mar 16 Fee: $199 www.ed2go.com/nctc/online-courses/sat-practiceact-prep/

Spring 2022֎(940) 668-3373֎Gainesville

Spring 2022

PERSONAL ENRICHMENT GRAHAM ONLY CAMPUS Individuals must be 16 years or older. Individuals under 18 years old must be accompanied by a parent/guardian.

(Wreath making students can be 13 years accompanied by a parent/guardian.

PAINTING & COFFEE WITH FRIENDS

METALSMITH and LAPIDARY Intermediate/Advanced and Lab for returning students. Demonstration lab for additional techniques.

Wear old clothes and closed toed shoes. Goggles, gloves, and tools will be available for use in class. (42 hrs.)

Beginning Lapidary is the art of working in stone by cutting and polishing stone into a beautiful jewel full of color and ambiance. (24 hrs.)

Course ID: HRGY 1048 0801 Fee: $249 Metal: Mon 2/7-5/16 2 pm-5-pm Lapidary: Tue 2/8-5/3 2 pm-5 pm —-OR—Course ID: HRGY 1048 0801 Fee: $249 Metal: Mon 2/7-5/16 6 pm-9-pm Lapidary: Thu 2/10-5/5 6 pm-9 pm

Lab Only for students to work on started projects or new projects. No instruction, tools and some materials available for student use. Must adhere to all safety rules.

Course ID: VPA 1050 0801 Lab: Mon 2/7-5/16 Course ID: VPA 1050 0802 Lab: Mon 2/7-5/16

2 pm-5 pm

$ 69

6 pm to 9pm

$ 69

**LAB MUST HAVE COMPLETED ONE SEMESTER OF INSTRUCTION IN SILVERSMITHING**

Come join us as we enjoy coffee with friends and family while creating masterpieces on canvas!

Course ID: VPA 1000 0801 Monday 1/10 7 pm to 9 pm Student Center Fee: $39 Deadline: 1/6

COMPUTER BASICS Little or no experience with computers? Then this “hands-on” class is for you. Understand terminology and basic parts. Two time slots available for your convenience. (2 hrs).

Course ID: COM 1025 0801 Monday 2/7 2 pm to 4 pm or —-OR—Course ID: COM 1025 0802 Monday 2/7 6 pm to 8 pm D-1 Computer Lab Fee: $29 Deadline: 1/24

SPRING WREATH MAKING Nothing is more inviting and feels like home than a beautiful wreath made with love. Join us as we make a wreath for the upcoming holidays.

Course ID: VPA 1000 0803 Monday 3/7 7 pm to 9 pm Multi-purpose Room Fee: $39 Deadline: 3/3

SHARE TWO FAVORITE RECIPES Beginning class for new students with little to no experience in metalsmithing. Course will provide hands on jewelry design using torch, hand tools and other equipment to shape and construct a finished piece. It is recommended for students to purchase starter kits, (information given first day of class).

Course ID: VPA 1050 0803 Tuesday 2/8-5/3

6 pm to 9pm

$129

Let’s start the new year with tasty and nutritious recipes from friends old and new. Students will make a book to hold recipes received.

Course ID: VPA 1000 0804 Monday 4/4 6 pm to 8 pm —-OR—Course ID: VPA 1000 0805 Monday 4/4 6:30 pm to 8:30 pm Multi-purpose Room Fee: $39 Deadline: 3/31

Spring 2022֎(940) 668-3373֎Gainesville

WORKFORCE TRAINING PROGRAM

Spring 2022

Do your employees need more skills to help your business?

SOFT SKILLS

CUSTOMIZED TRAINING

Leadership

COMPUTER

ACE customized training is aimed at meeting employers’ specific needs by offering specialized training designed by the company and institution representative.

Microsoft Suite

QuickBooks Keyboarding

Our courses prepare works with the skills necessary for a specific type of job as well as ongoing workplace education and skills development that addresses the needs of employers

BUSINESS

Accounting INDUSTRIAL Truck Driving Logistics Forklift

Customized Training, Pre-Designed Training Packages, and Workforce Grants to help you grow the human potential of your business.

Customer Service

Decision Making

Professionalism in the Workplace

Resolving Conflict

SKILLS DEVELOPMENT FUND

SKILLS FOR SMALL BUSINESS Through the Texas Workforce Commission, Skills for Small Business program has dedicated up to $2 million to the backbone of Texas business community-our small employers.

Funding for training is for full-time employees, newly hired or have been employed by the business twelve months prior. The program pays up to $1,800 for each new employee and $900 for existing employees per 12-month period.

Texas premier upskilling program, SDF grants provide sitespecific, customized training opportunities for Texas businesses and their employees to increase skill levels and wages of the Texas Workforce.

Success comes through collaboration among economic development partners, business partners, and eligible grant applicants, which include public community or technical colleges.

Contact us at 940-498-6446 or 940-668-4911 Spring 2022֎(940) 668-3373֎Gainesville

ENROLLMENT INFORMATION

Spring 2022

NORTH CENTRAL TEXAS COLLEGE DIVISION OF ADULT AND CONTINUING EDUCATION Gainesville Campus: 1525 W. California Street ACE 200 Gainesville, TX 76240 ENROLLING AND PAY IS EASY!!!

Enrollment is on a first-come, first-served basis and class size is limited. We are an open enrollment institution and do not discriminate on the basis of gender, race, age, religion, or disability.

1. By Phone. Register over the telephone.

Please have all the information requested on the registration form before calling. Call 940668-3373 2. In Person. Register in person at any North Central Texas College during office hours.

3. Online. Browse to my.nctc.edu follow instructions to register with Mane Stop and pay. https://www.nctc.edu/admissions/ manestop/index.html

To pay online: 1. Browse to my.nctc.edu 2. Login or Create account (Net ID and Student ID) 3. Select the “Student Services” tab a the top.

4. Select “Financial” from the options on the left.

5. Navigate to the memo box labeled “Payment Options”.

6. Choose the correct Year and Term from the drop down box.

7. Follow the prompts to complete your payment or payment plan.

8. Your payment plan is not complete until you Drop/Refund Policy 100% of a course fee will be refunded by the Division of Adult and Continuing Education if the request is submitted in writing seven business days prior to the course start date.

Sorry, ACE does not accept faxed registrations.

The Business Office does not accept American Express or Discover cards. ACE does not accept federal student aid through FAFSA. All credit cards are accepted for Payment Plans.

940-668-3373

REGISTRATION FORM Name: _______________________________________ Address: _____________________________________ City: __________________________State:__________ Zip: _____________ Phone: _____________________ Male ______ Female _______ Other _______ Ethnic background: Are you Hispanic or Latino (a person of Cuban, Mexican, Puerto Rican, South American, or Central American ancestry)?

Yes _____ No ______ Please select the racial category or categories with which you most identify. Circle as many as apply: White Black Asian American Indian/Alaskan Native International Native Hawaiian/Pacific Unknown Have you previously attended NCTC? ____________ How did you hear about the course? _____________ COURSE TITLE:____________________________ Course ID: _________________________________ Begin Date: _____________ End Date: __________ Time: __________________ Location:____________ Room: _________________ Cost $_____________ COURSE TITLE:_____________________________ Course ID: _________________________________ Begin Date: _____________ End Date: _________ Time: __________________ Location:____________ Room: _________________ Cost $____________ Total Amount Due $ _____________________________

North Central Texas College does not discriminate on the basis of race, color, national origin, gender, religion, age, or disability in provision of services.

Spring 2022֎(940) 668-3373֎Gainesville