Parylene is best for coating from flight parts to tiny little implantable details for more than half a century. Known as a “green polymer� because of its polymerization, there is no need for an initiator or other chemicals. It is easy to apply without a solvent, even at room temperature. With the electronics and health sector growing big with more tiny parts, Parylene coating in Malaysia is increasing every year. Need for Parylene coating in Malaysia Parylene is an umbrella name for a special series of versatile polymers based on paraxylene. Conventional coating suppliers had made it popular worldwide for more than the past fifty years from 1965. Because of its many excellent properties, it finds use in many applications in almost all sectors. It finds use in aerospace, among others, from providing an ultrathin coating to tiny parts of computers to circuit boards. With its pinholefree protection, it withstands all environmental conditions. It is FDA approved for its best protection against moisture, solvents, gases, chemicals, and Mil-I-46058C.
Though there are many parylene coating service companies, there is only limited commercial availability of parylene. But its needs are only increasing for protecting tiny electronic and healthcare products. As the thin film parylene coating is non-toxic, compatible, ultra-thin, and pinhole-free, it is in high demand in the medical industry. It is for its barrier protection against organic and inorganic solvents and fluids because of its sterilization methods like gamma, autoclave, and Ebeam that help make much medical equipment. Some products include hearing aids, medicine bottles, implantable devices, catheters, and coronary stents. Benefits of Parylene coating in Malaysia Only the best Parylene coating in Malaysia will provide most of its benefits that include, among others.
Provides pinhole-free protection as it can apply ultra-thin thickness film coating of less than 1 µm for penetrating microporosity. Offers uniform thickness tolerances that are tight as plus or minus 5% that are possible even for complex and intricate shapes. Provides thermal stability between -200°C to 125°C and is insoluble in most of the solvent systems within its temperature range. It eliminates the need for liquid release agents as it acts as a dry film lubricant. It removes tackiness from the substrate at less than 1500 A thickness coatings. It is environmentally friendly as it does not require any chemicals used in liquid coatings. It offers even coating on all surfaces, including sharp points, hard to reach surfaces, deed crevices, and others because of its gaseous nature. It offers superior electrical insulation because of its excellent electrical dielectric properties, also with minimal dimensional change. Parylene coating in Malaysia offers all the above benefits and more for many applications in various sectors.
Contact Us
+607 5543 118 www.dawntechsb.com https://www.facebook.com/Dawn-Tech-MalaysiaSdn-Bhd-1602257286672278/