Page 1

CATALOG2017


ENDURO size reach stack (mm) (mm)

ST (mm)

TT (mm)

SMALL (low*) 400 606 406 565 SMALL (high*) 415 600 406 565 MEDIUM (low*) 435 606 445 590 MEDIUM (high*) 446 600 445 590 LARGE (low*) 460 606 480 610 LARGE (high*) 470 600 480 610 * with use of included offset shock hardware

eTT (mm)

CS (mm)

540 550 582 592 613 623

425 425 425 425 425 425

HT HT ST BB (mm) angle angle drop (mm) 18 120 65.5o 76.5o 77o 9 120 66o 18 120 65.5o 76.5o 77o 9 120 66o 18 120 65.5o 76.5o 77o 9 120 66o

WB wheel stand(mm) size over (mm) (”) 1147 27.5 785 1142 27.5 788 1173 27.5 785 1171 27.5 788 1203 27.5 785 1201 27.5 788

NEW!

BLACKBIRD PRO

The Dartmoor Blackbird Pro really is a no-compromise Enduro Killer. With its low centre of gravity, long front triangle, coupled with a linear suspension design and Rockshox Pike RCT3 fork and Monarch RC3 shox the Blackbird Pro will ensure a fast, controlled ride! Demolishing the fastest lines and railing berms. But as we know, it’s not all smashing those downhill runs! The Blackbird Pro is designed and equipped to ensure technical climbs are cleared with ease. The 11-speed SRAM GX/NX group set, Sniper rims, Maxxis Minion DHF EXO tires, SRAM brakes and 170mm Reverb seat post ensure this bike is ready to tackle anything you put in front of it straight out of the box. Included offset shock hardware allows to adjust geometry in high or low position to tune the frame to your individual preferences. Weight: 14.0kg (without pedals); 14.45kg (with pedals)

2

hub size (mm) 142x12 142x12 142x12 142x12 142x12 142x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52

frame: frame size: wheel size: fork: shock: shock hardware: headset: derailleur: shifter : brakes: crankset: chainring: cassette: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

BB type (mm) Euro73 Euro73 Euro73 Euro73 Euro73 Euro73

post diam. (mm) 30.9 30.9 30.9 30.9 30.9 30.9

clamp diam. (mm) 34.9 34.9 34.9 34.9 34.9 34.9

brake mount PM 160mm PM 160mm PM 160mm PM 160mm PM 160mm PM 160mm

max. rotor size (mm) 180 180 180 180 180 180

Cyan/Lime, alu 6061, travel 160mm Small, Medium, Large 27.5” Rock Shox Pike RCT3 27.5”, travel 160mm, axle 15mm, tapered Rock Shox Monarch Plus RC3 DebonAir HV, 216/63mm 22.2x8mm integrated IS42/IS52 SRAM NX 1X11 SRAM NX, 11–speed SRAM DB5, rotors 180mm SRAM GX 1000 24mm, 170mm X-Sync 32T SRAM XG–1150, 10–42T SRAM PC-1110 Dartmoor Stream OEM Dartmoor Sniper 27.5”, 32H, F/V front: Dartmoor Reel Pro 100x15mm, 32H rear: Dartmoor Reel Pro 142x12mm, 32H, SRAM XD Maxxis Minion DHF 27.5x2.5” Dartmoor Nitro FR 780mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing Rock Shox Reverb Stealth, travel 170mm, Ø30.9mm

size reach stack (mm) (mm)

ST (mm)

TT (mm)

SMALL (low*) 400 606 406 565 SMALL (high*) 415 600 406 565 MEDIUM (low*) 435 606 445 590 MEDIUM (high*) 446 600 445 590 LARGE (low*) 460 606 480 610 LARGE (high*) 470 600 480 610 * with use of included offset shock hardware

eTT (mm)

CS (mm)

540 550 582 592 613 623

425 425 425 425 425 425

HT HT ST BB (mm) angle angle drop (mm) 18 120 65.5o 76.5o 77o 9 120 66o o o 76.5 18 120 65.5 o o 77 9 120 66 18 120 65.5o 76.5o 77o 9 120 66o

WB wheel stand(mm) size over (mm) (”) 1147 27.5 785 1142 27.5 788 1173 27.5 785 1171 27.5 788 1203 27.5 785 1201 27.5 788

NEW!

BLACKBIRD

Blackbird is a pure Enduro machine built to tackle the toughest downhill trails and slaughter the most technical of climbs. 160mm of linear suspension combined with the Rock Shox Monarch shock and frame’s low centre of gravity together with long front triangle ensure unparalleled riding control. Suntour Auron LO-RC fork, SRAM drivetrain and KS E-TEN I 125mm travel dropper all selected to complement this bikes sole purpose - an Enduro race machine. Included offset shock hardware allows to adjust geometry in high or low position to tune the frame to your individual preferences. Weight: 14.85kg (without pedals); 15.3kg (with pedals)

hub size (mm) 142x12 142x12 142x12 142x12 142x12 142x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52

frame: frame size: wheel size: fork: shock: shock hardware: headset: derailleur: shifter : brakes: crankset: chainring: cassette: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

BB type (mm) Euro73 Euro73 Euro73 Euro73 Euro73 Euro73

post diam. (mm) 30.9 30.9 30.9 30.9 30.9 30.9

clamp diam. (mm) 34.9 34.9 34.9 34.9 34.9 34.9

brake mount PM 160mm PM 160mm PM 160mm PM 160mm PM 160mm PM 160mm

max. rotor size (mm) 180 180 180 180 180 180

Matt Black, alu 6061, travel 160mm Small, Medium, Large 27.5” Suntour Auron LO-RC 27.5”, travel 160mm, axle 15mm, tapered Rock Shox Monarch RL DebonAir HV, 216/63mm 22.2x8mm integrated IS42/IS52 SRAM NX 1X11 SRAM NX, 11–speed SRAM Level, rotors 180mm SRAM NX Power Spline, 170mm X-Sync 32T SRAM PG–1130, 11–42T SRAM PC-1110 Dartmoor Stream OEM Dartmoor Raider 27.5”, 32H F/V front: Dartmoor Reel 100x15mm, 32H rear: Dartmoor Reel 142x12mm, 32H Maxxis Ardent 27.5x2.25” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing Kind Shock E–TEN Integrated, travel 125mm, Ø30.9mm

3


TRAIL size reach stack (mm) (mm)

ST (mm)

TT (mm)

SMALL (low*) 400 606 400 530 SMALL (high*) 410 600 400 530 MEDIUM (low*) 435 606 450 555 MEDIUM (high*) 445 600 450 555 LARGE (low*) 460 606 475 585 LARGE (high*) 470 600 475 585 * with use of included offset shock hardware

eTT (mm)

CS (mm)

525 535 557 567 582 592

430 430 430 430 430 430

HT HT ST BB (mm) angle angle drop (mm) 78o 30 110 66.5o 78.5o 21 110 67o 78o 30 110 66.5o 78.5o 21 110 67o 78o 30 110 66.5o 78.5o 21 110 67o

WB wheel stand(mm) size over (mm) (”) 1128 27.5+ 805 1127 27.5+ 805 1163 27.5+ 805 1162 27.5+ 805 1188 27.5+ 805 1187 27.5+ 805

NEW!

BLUEBIRD PRO 27.5+

Bluebird 27.5+ Pro is an all-purpose complete Trail bike. The 130mm travel coupled with 27.5+ traction and grip gives you an unlimited access to any area. It doesn’t matter if you prefer shredding through the rough descents, riding single-track or tripping 60km through the mountains - Bluebird will not disappoint just point and pedal. Linear frame suspension characteristic combined with the Rock Shox Monarch shock makes the frame very sensitive in the entire travel range. Included offset shock hardware allows to adjust geometry in high or low position to tune the frame to your individual preferences. Bluebird 27.5+ Pro is equipped with the Rock Shox Revelation fork, Boost standard wheels, SRAM brakes, 11-speed SRAM NX group set, Schwalbe Nobby Nic 3.0 tires and a KS E-TEN I 125mm dropper post. This bike really will take you anywhere. Weight: 14.95kg (without pedals); 15.4kg (with pedals)

4

hub size (mm) 148x12 148x12 148x12 148x12 148x12 148x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52

frame: frame size: wheel size: fork: shock: shock hardware: headset: derailleur: shifter : brakes: crankset: chainring: cassette: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

BB type (mm) Euro73 Euro73 Euro73 Euro73 Euro73 Euro73

post diam. (mm) 30.9 30.9 30.9 30.9 30.9 30.9

clamp diam. (mm) 34.9 34.9 34.9 34.9 34.9 34.9

brake mount IS IS IS IS IS IS

max. rotor size (mm) 180 180 180 180 180 180

Red Devil, alu 6061, travel 130mm Small, Medium, Large 27.5”+ Rock Shox Revelation RL 27.5”+ Solo Air, Boost travel 130mm, axle 15mm, tapered Rock Shox Monarch RL Solo Air, 190/51mm 22.2x8mm integrated IS42/IS52 SRAM NX 1X11 SRAM NX, 11–speed SRAM Level, rotors 180mm SRAM NX 24mm, 175mm X-Sync 30T Boost SRAM PG–1130, 11–42T SRAM PC-1110 Dartmoor Stream OEM Dartmoor Aircraft Pro 27.5”+, 32H, F/V front: Dartmoor Reel Boost 110x15mm, 32H rear: Dartmoor Reel Boost 148x12mm, 32H Schwalbe Nobby Nic 27.5x3.0” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing Kind Shock E–TEN Integrated, travel 125mm, Ø30.9mm

size reach stack (mm) (mm)

ST (mm)

TT (mm)

SMALL (low*) 400 606 400 530 SMALL (high*) 410 600 400 530 MEDIUM (low*) 435 606 450 555 MEDIUM (high*) 445 600 450 555 LARGE (low*) 460 606 475 585 LARGE (high*) 470 600 475 585 * with use of included offset shock hardware

eTT (mm)

CS (mm)

525 535 557 567 582 592

430 430 430 430 430 430

HT HT ST BB (mm) angle angle drop (mm) 78o 30 110 66.5o 78.5o 21 110 67o 78o 30 110 66.5o 78.5o 21 110 67o 78o 30 110 66.5o 78.5o 21 110 67o

WB wheel stand(mm) size over (mm) (”) 1128 29 805 1127 29 805 1163 29 805 1162 29 805 1188 29 805 1187 29 805

NEW!

BLUEBIRD 29

Like its Plus size sister the Bluebird 29 is an all-purpose Trail weapon. 130mm travel coupled with 29” wheels is a perfect choice in the demanding terrain. Big distance, big terrain, big features… big smiles! The Bluebird 29 is at home smashing all day rides as well as big alpine descents or technical trails. Linear frame suspension characteristic combined with the Rock Shox Monarch shock makes the frame very sensitive in the entire travel range. Included offset shock hardware allows to adjust geometry in high or low position to tune the frame to your individual preferences.Bluebird 29 is equipped with the Rock Shox Sektor Silver fork, Boost standard wheels, SRAM Level brakes, 11-speed SRAM NX group set and KS E-TEN I 125mm dropper post. Weight: 14.65kg (without pedals); 15.1kg (with pedals)

hub size (mm) 148x12 148x12 148x12 148x12 148x12 148x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52

frame: frame size: wheel size: fork: shock: shock hardware: headset: derailleur: shifter : brakes: crankset: chainring: cassette: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

BB type (mm) Euro73 Euro73 Euro73 Euro73 Euro73 Euro73

post diam. (mm) 30.9 30.9 30.9 30.9 30.9 30.9

clamp diam. (mm) 34.9 34.9 34.9 34.9 34.9 34.9

brake mount IS IS IS IS IS IS

max. rotor size (mm) 180 180 180 180 180 180

Turquoise/Black, alu 6061, travel 130mm Small, Medium, Large 29” Rock Shox Sektor Silver RL 29”, Boost travel 130mm, axle 15mm, tapered Rock Shox Monarch RL Solo Air, 190/51mm 22.2x8mm integrated IS42/IS52 SRAM NX 1X11 SRAM NX, 11–speed SRAM Level, rotors 180mm SRAM NX Power Spline, 175mm X-Sync 30T Boost SRAM PG–1130, 11–42T SRAM PC-1110 Dartmoor Stream OEM Dartmoor Raider 29”, 32H, F/V front: Dartmoor Reel Boost 110x15mm, 32H rear: Dartmoor Reel Boost 148x12mm, 32H Maxxis Ardent 29x2.25” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing Kind Shock E–TEN Integrated, travel 125mm, Ø30.9mm

5


ENDURO/FREERIDE size reach stack (mm) (mm) SHORT LONG

410 440

584 584

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

406 431

535 565

552 582

419 419

HT HT ST BB (mm) angle angle drop (mm) 76o –4 115 65o 76o –4 115 65o

WB wheel (mm) size (”) 1150 27.5 1180 27.5

hub size (mm) 135x12 135x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

brake mount

max. rotor size (mm)

PM 160mm PM 160mm

203 203

Weight: 15.0kg (without pedals); 15.45kg (with pedals)

frame: frame size: wheel size: fork: shock: shock hardware: headset: derailleur: shifter : brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle : seat post:

6

SHORT LONG

410 440

584 584

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

406 431

535 565

552 582

419 419

HT HT ST BB (mm) angle angle drop (mm) 76o –4 115 65o 76o –4 115 65o

WB wheel (mm) size (”) 1150 26 1180 26

hub size (mm) 135x12 135x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

brake mount

max. rotor size (mm) PM 160mm 203 PM 160mm 203

WISH BIKEPARK

WISH ENDURO

Wish Enduro is one of our most versatile bikes. It is able to handle all conditions technical climbs, sketchy downhill runs, drops and jumps. The Wish just shrugs it off. With Enduro racer and trail riders favourites the Rock Shox Yari fork and Monarch Plus R shock taking care of the suspension duties you are left to light up the trail with ease. Sniper wheels, SRAM GX 11–speed drive, Avid DB5 disc brakes and adjustable Kind Shock E–TEN I seat post are all the key features of every outstanding Enduro toy.

size reach stack (mm) (mm)

Pearl Black/Turquoise, alu 7005, travel 170mm Short, Long 27.5” Rock Shox Yari RC 27.5”, travel 170mm, axle 15mm, tapered Rock Shox Monarch Plus R DebonAir High Volume 216/63mm 22.2x8mm integrated IS42/IS52 SRAM GX 1X11 SRAM GX 11–speed Avid DB5, rotors 180mm SRAM GX 1000 24mm, 175mm X–Sync 30T SRAM XG–1150, 10–42T Dartmoor Stream OEM Dartmoor Sniper 27.5”, 32H, F/V front: Dartmoor Revolt Disc 100x15mm, 32H rear: Dartmoor Revolt Cassette 135x12mm, 32H, SRAM XD Kenda Nevegal–X Pro 27.5x2.35” Dartmoor Nitro FR 780mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing Kind Shock E–TEN Integrated, travel 100mm, Ø31.6mm

Design to tackle everything the modern bike park can throw at it. Use it for riding A–lines and technical single tracks or downhill tracks. The 170mm travel Yari fork and Rock Shox Kage R rear shock with piggyback together with 26” wheels will ensure a well controlled ride. With its eye-catching Miami Vice colour line the Wish Bike Park will grab rider’s attention both on the trails or queuing for the uplift! Weight: 15.95kg (without pedals); 16.4kg (with pedals)

frame: frame size: wheel size: fork: shock: shock hardware: headset: derailleur: shifter: brakes: crankset: chainring: chain guide: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

Black/Miami Vice, alu 7005, travel 170mm Short, Long 26” RockShox Yari RC 27.5”, travel 170mm, axle 15mm, tapered Rock Shox Kage R, 216/63mm, spring 500 22.2x8mm integrated IS42/IS52 SRAM X7 SRAM X4 9–speed Avid DB1, rotors 203mm Samox AF15–ISIS, 175mm 34T steel, ISCG-05 SRAM PG–920, 11–34T Dartmoor Stream OEM Shining DB–30 26”, 32H, F/V front: Dartmoor Revolt Disc 100x15mm, 32H rear: Dartmoor Revolt Cassette 135x12mm, 32H Kenda Nevegal Sport 26x2.35” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Fury v.2, 45mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing alu 6061, 31.6x300mm

7


DOWNHILL/FREERIDE size reach stack (mm) (mm) SHORT LONG

400 430

592 592

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

410 410

520 558

560 590

430 430

HT HT ST BB (mm) angle angle drop (mm) 75o –5 115 64o 75o –5 115 64o

WB wheel hub (mm) size size (”) (mm) 1170 27.5 150x12 1200 27.5 150x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73

post diam. (mm) 31.6 31.6

clamp diam. (mm) 34.9 34.9

max. rotor size (mm) PM 160mm 203 PM 160mm 203

Weight: 17.5kg (without pedals); 17.95kg (with pedals)

8

SMALL MEDIUM LARGE

405 430 450

620 620 620

ST TT eTT CS HT HT ST BB WB stand wheel size (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) –over (”) (mm) (mm) 73o 30 1151 805 27.5/27.5+ 380 585 595 425 120 65o 73o 30 1176 805 27.5/27.5+ 410 603 620 425 120 65o 73o 30 1206 805 27.5/27.5+ 440 626 650 425 120 65o

hub size (mm) 142x12 142x12 142x12

headset type (S.H.I.S) IS42/IS52 IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73 Euro73

post diam. (mm) 30.9 30.9 30.9

clamp diam. (mm) 34.9 34.9 34.9

brake mount

max. rotor size (mm) PM 160mm 203 PM 160mm 203 PM 160mm 203

NEW!

ROOTS

Roots is a non–compromise gravity machine for the hardcore purposes. Tough freeride and downhill tracks, huge drops and the biggest gaps – this is its natural environment. The Roots frame was used by our team rider Szymon Godziek to perform his legendary runs in the biggest gravity event in the world – the famous Red Bull Rampage, where he backflipped over the 22 meters canyon. Roots Black Angel is equipped with the hi–end suspension coming from Rock Shox – dual crown Boxxer RC fork and Kage RC coil rear shock. The other high quality parts include Avid hydraulic disc brakes with 8” rotors, integrated Dartmoor Rage v.2 stem, Dartmoor Tornado bars and 27.5” wheels with Dartmoor Revolt hubs.

size reach stack (mm) (mm)

brake mount

HORNET

frame: frame size: wheel size: fork: shock: shock hardware: headset: derailleur: shifter : brakes: crankset: chainring: chain guide: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

Black Angel, alu 7005, travel 200mm Short, Long 27.5” Rock Shox Boxxer RC CL 27.5”, travel 200mm, axle 20mm, 1-1/8” Rock Shox Kage RC, 222/69mm, spring 550 22.2x8mm integrated IS42/IS52 SRAM X7 SRAM X4, 9–speed Avid DB5, rotors 200mm Samox AF15–ISIS, 175mm 36T steel, ISCG-05 SRAM PG–920, 11–34T Dartmoor Stream OEM Shining DB–30 27.5”, 32H, A/V front: Dartmoor Revolt Disc 110x20mm, 32H rear: Dartmoor Revolt Cassette 150x12mm, 32H Kenda Honey Badger DH Pro, 27.5x2.40” Dartmoor Tornado 750mm Ø31.8mm Dartmoor Rage v.2, Ø31.8mm Dartmoor Roots Dartmoor Trail Racing alu 6061, 31.6x300mm

Hornet is the toughest of all the hardtail bikes in Dartmoor family. Perfect for single tracks, bike parks and making your own way in the mountains where no marked trails exist. With a new designed front triangle shape taken from Roots frame, 142x12 dropouts and even stronger construction than before this bike is as tough as a hardtail gets. New Hornet is equipped with a 150mm travel Suntour Auron 27.5+ Boost standad fork, wide sleeved joint rims, Maxxis Minion DHF+ tires in 27.5x2.8” size, 1x11 SRAM NX drivetrain with 11- 42T cassette and SRAM Level brakes allowing for a comfortable ride in all riding conditions. So if you think that Primal bikes are not tough enough players for you then try our new Hornet! Weight: 13.9kg (without pedals); 14.35kg (with pedals)

frame: frame size: wheel size: fork: headset: derailleur: shifter : brakes: crankset: chainring: cassette: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle : seat post:

Scout Green, alu 6061 Small, Medium, Large 27.5”+ Suntour Auron LO–RC 27.5+ Boost, travel 150mm, axle 15mm, tapered integrated IS42/IS52 SRAM NX 1X11 SRAM NX, 11–speed SRAM Level, rotors 180mm Samox AF15–ISIS, 175mm narrow–wide 32T SRAM PG-1130, 11–42T SRAM PC-1110 Dartmoor Stream OEM Aircraft OEM 27.5”+, 32H, F/V front: Dartmoor Reel Boost 110x15mm, 32H rear: Dartmoor Reel 142x12mm, 32H Maxxis Minion DHF+ 27.5x2.8” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Fury v.2, 45mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing alu 6061, 30.9x350mm

9


ENDURO/TRAIL size reach stack (mm) (mm) SMALL MEDIUM LARGE

400 425 450

644 644 644

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

430 456 482

580 601 624

585 610 635

430 430 430

HT HT ST BB (mm) angle angle drop (mm) 73o 60 115 67o 73o 60 115 67o o o 73 60 115 67

WB stand (mm) -over (mm) 1126 795 1151 795 1171 795

wheel size (”) 27.5+ 27.5+ 27.5+

hub headset size type (mm) (S.H.I.S) 148x12 IS42/IS52 148x12 IS42/IS52 148x12 IS42/IS52

BB type (mm) Euro73 Euro73 Euro73

post diam. (mm) 30.9 30.9 30.9

clamp diam. (mm) 34.9 34.9 34.9

brake max. mount rotor size (mm) IS 180 IS 180 IS 180

NEW!

Weight: 13.95kg (without pedals); 14.4kg (with pedals)

400 425 450

644 644 644

TT (mm)

eTT (mm)

CS (mm)

430 456 482

580 601 624

585 610 635

430 430 430

HT HT ST BB (mm) angle angle drop (mm) 73o 60 115 67o 73o 60 115 67o o o 73 60 115 67

WB stand (mm) -over (mm) 1126 795 1151 795 1171 795

wheel size (”) 29 29 29

hub headset size type (mm) (S.H.I.S) 148x12 IS42/IS52 148x12 IS42/IS52 148x12 IS42/IS52

BB type (mm) Euro73 Euro73 Euro73

post diam. (mm) 30.9 30.9 30.9

clamp diam. (mm) 34.9 34.9 34.9

brake max. mount rotor size (mm) IS 180 IS 180 IS 180

PRIMAL 29

frame: frame size: wheel size: fork: headset: derailleur: shifter: brakes: crankset: chainring: cassette: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

10

SMALL MEDIUM LARGE

ST (mm)

NEW!

PRIMAL PRO 27.5+

Primal 27.5+ Pro is definitely first in-line as one of the most versatile hardtail bikes on the market. Thanks to the mind blowing grip provided by the 3” Schwalbe Nobby Nic tires this bike can reach all those places that were so far not available to explore. Not to mention hitting trails faster than you ever have before! Partnered with 140mm travel Rock Shox Revelation forks, the Primal 27.5+ is one of the most comfortable hardtails available! 1x11 SRAM NX drivetrain with 11-42T cassette makes pedalling comfortable in all riding conditions and really will see you conquer all the mountains.

size reach stack (mm) (mm)

Red Devil, alu 6061 Small, Medium, Large 27.5”+ Rock Shox Revelation RL 27.5”+ Solo Air, Boost travel 140mm, axle 15mm, tapered integrated, IS42/IS52 SRAM NX 1X11 SRAM NX, 11–speed SRAM Level, rotors 180mm SRAM NX 24mm, 175mm X-Sync 30T Boost SRAM PG–1130, 11–42T SRAM PC-1110 Dartmoor Stream OEM Dartmoor Aircraft Pro 27.5”+, 32H, F/V front: Dartmoor Reel Boost 110x15mm, 32H rear: Dartmoor Reel Boost 148x12mm, 32H Schwalbe Nobby Nic 27.5x3.0” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing Kind Shock E–TEN Integrated, travel 125mm, Ø30.9mm

Primal 29 is a Trail bike with gravity soul based on the 29” wheels. It is a perfect bike for all those riders looking for a long-distance rides in a medium-rough and rough terrain. Primal 29 is based on the Primal Plus frame that works in a Boost standard with both 27.5”+ and 29” size wheels. Suspension is provided by the Rock Shox Recon Silver fork with 120mm travel. 1x10 drivetrain with 11-42 cassettes allows finding a proper gear in all the terrain and riding conditions. Weight: 13.3kg (without pedals); 13.75kg (with pedals)

frame: frame size: wheel size: fork: headset: derailleur: shifter: brakes: crankset: chainring: cassette: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

Cyan/Lime, alu 6061 Small, Medium, Large 29” Rock Shox Recon Silver RL 29” Solo Air, Boost travel 120mm, axle 15mm, tapered integrated, IS42/IS52 SRAM X-5 SRAM X-5, 10–speed SRAM Level, rotors 180mm SRAM NX Power Spline, 175mm X-Sync 30T Boost Sunrace MS2, 11–42T SRAM PC-1031 Dartmoor Stream OEM Dartmoor Raider 29”, 32H, F/V front: Dartmoor Reel Boost 110x15mm, 32H rear: Dartmoor Reel Boost 148x12mm, 32H Maxxis Ardent 29x2.25” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing alu 6061, 30.9x350mm

11


ENDURO/TRAIL size reach stack (mm) (mm) SMALL MEDIUM LARGE

373 393 413

610 610 610

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

426 452 477

559 573 591

585 604 625

425 425 425

HT HT ST BB (mm) angle angle drop 115 115 115

67o 67o 67o

71o 71o 71o

30 30 30

WB stand (mm) -over (mm) 1085 780 1105 792 1125 803

wheel size (”) 27.5 27.5 27.5

hub size

headset type (S.H.I.S) 135x10 IS42/IS52 135x10 IS42/IS52 135x10 IS42/IS52

BB type (mm) Euro73 Euro73 Euro73

post diam. (mm) 31.6 31.6 31.6

clamp diam. (mm) 34.9 34.9 34.9

brake max. mount rotor size (mm) IS 180 IS 180 IS 180

PRIMAL PRO Looking to ride in all conditions? You should definitely check Primal Pro which is just perfect for mountain trips, demanding uphills, crazy downhills or rough terrain. The Primal Pro was designed to meet all your expectations. Our team rider – Olek Wieczorkiewicz – won the overall hardtail ranking in 2015 Enduro Trophy series riding a Primal bike. Rock Shox Revelation fork and 11–42T cassette make this bike even more versatile. This bike will allow you to get anywhere you want! Weight: 12.95kg (without pedals); 13.4kg (with pedals)

SMALL MEDIUM LARGE XLARGE

390 415 440 465

625 625 625 625

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

430 457 480 508

566 595 616 632

581 606 631 656

425 425 425 425

HT HT ST BB (mm) angle angle drop (mm) 73o 40 120 67o 73o 40 120 67o o o 73 40 120 67 o o 73 40 120 67

WB stand wheel hub (mm) –over size size (mm) (”) (mm) 1100 785 27.5 135x10 1126 785 27.5 135x10 1151 785 27.5 135x10 1176 785 27.5 135x10

headset type (S.H.I.S) IS42/IS52 IS42/IS52 IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73 Euro73 Euro73

post diam. (mm) 30.9 30.9 30.9 30.9

clamp diam. (mm) 34.9 34.9 34.9 34.9

brake mount IS IS IS IS

max. rotor size (mm) 180 180 180 180

NEW! frame: frame size: wheel size: fork: headset: derailleur: shifter: brakes: crankset: chainring: cassette: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

12

size reach stack (mm) (mm)

Red Devil, alu 6061 Small, Medium, Large 27.5” Rock Shox Revelation RL 27.5” Solo Air, travel 140mm, axle 15mm, tapered integrated, IS42/IS52 SRAM X7 SRAM X5 10–speed Avid DB1, rotors 180mm Samox AF15–ISIS, 175mm narrow–wide 32T Sunrace MS3 11–42T Dartmoor Stream OEM Shining DB–28 27.5”, 32H, A/V front: Dartmoor Revolt Disc 100x15mm, 32H rear: Dartmoor Vee–One 135x10mm QR, 32H Kenda Nevegal–X Pro 27.5x2.35” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing Kind Shock E–TEN R, travel 100mm, Ø31.6mm

PRIMAL 27.5

Primal 27.5 is the perfect choice for those wanting maximum versatility in all conditions! Long distance rides, tough climbs and sick descents - this is what the real All Mountain and Enduro explorers have to face every day and Primal frame has been developed to meet these challenges. Equipped with our new front triangle design and lower stand over, this really is a versatile bike! Designed around RST Aerial fork with 130mm of travel, Raider rims, 2x9 SRAM drivetrain and SRAM hydraulical disc brakes this bike really is designed to be the master of all trades! Weight: 14.05kg (without pedals); 14.4kg (with pedals)

frame: frame size: wheel size: fork: headset: rear derailleur: shifter: front derailleur: shifter: brakes: crankset: chainring: cassette: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle: seat post:

Black/Miami Vice, alu 6061 Small, Medium, Large, XLarge 27.5” RST Aerial 27.5 TnL-R, travel 130mm, axle 9mm, 1–1/8” integrated, IS42/IS52 SRAM X5 SRAM X5, 9–speed SRAM X4 SRAM X4, 2–speed SRAM Level, rotors 180mm Samox AF12–214SS–BG18, 175mm 32T–22T w/bashguard Sunrace M980, 11–40T SRAM PC-951 Dartmoor Candy Raider 27.5”, 32H, F/V front: w/sealed bearings, 9mm QR, 32H rear: w/sealed bearings, 135x10mm QR, 32H Kenda Honey Badger Sport 27.5x2.2” Dartmoor Tornado 750mm, Ø31.8mm Dartmoor Trail 50mm, Ø31.8mm Dartmoor Maze Dartmoor Trail Racing alu 6061, 30.9x350mm

13


DIRT/STREET size reach stack (mm) (mm) LONG

425

550

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

337

577

385

HT HT ST BB (mm) angle angle drop (mm) 74o 25 120 69o

WB (mm) 1063

wheel size (”) 26

hub size (mm) 135x10

headset type (S.H.I.S) IS42/IS52

BB type (mm) Euro73

post diam. (mm) 30.9

clamp diam. (mm) 34.9

frame: frame size: wheel size: fork: headset: rear brake: crankset: chainring: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle:

14

425

TT (mm)

eTT (mm)

CS (mm)

337

577

385

550

HT HT ST BB (mm) angle angle drop (mm) 74o 25 120 69o

WB (mm) 1063

wheel size (”) 26

hub size (mm) 135x10

headset type (S.H.I.S) IS42/IS52

BB type (mm) Euro73

post diam. (mm) 30.9

clamp diam. (mm) 34.9

brake max. mount rotor size (mm) IS 160

TWO6PLAYER

TWO6PLAYER PRO

Weight: 11.85kg (with pedals)

LONG

ST (mm)

NEW!

NEW!

Two6Player Pro is a bike that needs no introduction. Regarded as the best dirt jumping and slopestyle bike chosen by the best riders in the world. This bike is built on the lightweight and unbreakable Two6Player frame which for 2017 is now even stronger than before. Two6Player Pro’s no compromise specification including - Rock Shox Pike DJ, super strong Dartmoor Shield rims, BMX cranks with micro drive and SRAM Level T hydraulic disc brake. The Two6Player Pro is the weapon of choice for Szymon Godziek and Tomas Zejda. Two6Player Pro - the ultimate weapon for competing and winning the biggest slopestyle and dirt jumping contests in the world.

size reach stack (mm) (mm)

brake max. mount rotor size (mm) IS 160

Matt Black, alu 6061 Long 26” Rock Shox Pike DJ, travel 100mm, axle 15mm, tapered integrated, IS42/IS52 SRAM Level T, rotor 160mm Dartmoor Chukka, 3–pcs, Cr–Mo 4130 Dartmoor Peacock 25T Dartmoor Core Black Dartmoor Stream OEM Dartmoor Shield 26”, 32H, A/V front: Dartmoor Reel Pro 100x15mm, 32H rear: Dartmoor Reel Pro Singlespeed 10T, 32H Schwalbe Table Top 26x2.25” Dartmoor Tornado 750 mm, Ø31.8mm Dartmoor Fury v.2, 45mm, Ø31.8mm Dartmoor Maze Dartmoor Fatty Combo

Like the Pro version, the Two6Player utilizes Dartmoor’s ultimate 2017 frame. This lightweight machine is a perfect choice for all the dirt jumping lovers. Two6Player is available for 2017 in a unique color combination of scout green frame with coffee brown tires, saddle, pedals and grips. The bike is equipped with the legendary Marzocchi DJ1 fork, Dartmoor Raider rims, BMX cranks with micro drive and SRAM Level hydraulic discbrake. Weight: 12.9kg (with pedals)

frame: frame size: wheel size: fork: headset: rear brake: crankset: chainring: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle:

Scout Green, alu 6061 Long 26” Marzocchi DJ1, travel 100mm, axle 20mm, tapered integrated, IS42/IS52 SRAM Level, rotor 160mm Dartmoor Chukka, 3–pcs, Cr–Mo 4130 Dartmoor Peacock 25T Dartmoor Core Black Dartmoor Candy Dartmoor Raider 26”, 32H, A/V front: Dartmoor Reel 100x15mm, 32H rear: Dartmoor Reel Singlespeed 10T, 32H Innova IA-2128, 26x2.2” Dartmoor Tornado, 750mm, Ø31.8mm Dartmoor Fury v.2, 45mm, Ø31.8mm Dartmoor Block Dartmoor Fatty Combo

15


DIRT/STREET size reach stack (mm) (mm) SINGLE SIZE

403

579

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

354

557

385

HT HT ST BB (mm) angle angle drop (mm) – 25 115 70o

WB wheel hub (mm) size size (”) (mm) 1036 26 135x10

headset type (S.H.I.S) IS42/IS52

BB type (mm) Euro73

post diam. (mm) 27.2

clamp diam. (mm) 31.8

brake max. mount rotor size (mm) IS 160

NEW!

Weight: 13.4kg (with pedals)

403 388

579 562

TT (mm)

eTT (mm)

CS (mm)

354 325

557 540

– –

385 370

HT HT ST BB (mm) angle angle drop (mm) – 25 115 70o – 8 115 70o

WB wheel hub (mm) size size (”) (mm) 1036 26 135x10 1006 24 135x10

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm) Euro73 Euro73

post diam. (mm) 27.2 27.2

clamp diam. (mm) 31.8 31.8

brake max. mount rotor size (mm) IS 160 IS 160

GAMER26 BASIC / GAMER24 BASIC

frame: frame size: wheel size: fork: headset: rear brake: crankset: chainring: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle:

16

GAMER26 GAMER24

ST (mm)

NEW!

GAMER26

Gamer26 is the number one choice for those who are looking for a no compromise Dirt bike at an affordable price. The super strong Gamer frame, Marzocchi DJ3 fork, Dartmoor Raider rims, BMX cranks with micro drive, SRAM Level hydraulic brakes and hubs equipped with sealed bearings ensure you will master pump and dirt tracks anywhere in the world.

size reach stack (mm) (mm)

Cyan/Lime, alu 6061 single size 26” Marzocchi DJ3, travel 100mm, axle 9mm, 1–1/8” integrated IS42/IS52 SRAM Level, 160mm rotor Dartmoor Chukka, 3–pcs, Cr–Mo 4130 Dartmoor Peacock 25T Dartmoor Core Black Dartmoor Candy Dartmoor Raider 26”, 32H, A/V front: w/sealed bearings, 9mm, 32H rear: Dartmoor Reel Singlespeed 10T, 32H Innova IA-2128 26x2.2” Dartmoor Storm Cr–Mo 4130, 700mm, Ø22.2mm Dartmoor Fury v.2, 35mm, Ø22.2mm Dartmoor Block Dartmoor Fatty Combo

Sharing the same geometry as Dartmoor’s legendary Two6Player the Gamer Basic is an ultimate weapon designed for the dirt jumping rookies to make learning the tricks safe and easy. The bike is equipped with all the necessary parts to start the journey around the local skateparks, pumptracks and small dirt jumps. It can be ordered either with 26” or 24” wheels. Based on the durable Gamer frame, RST Dirt RA fork upgraded for 2017 with hydraulic rebound adjustment (for Gamer26 Basic), SRAM mechanical disc brake, strong wheels with Raider rims and hubs with sealed bearings. Weight: 13.7kg (with pedals)

frame: frame size: wheel size: fork: headset: rear brake: crankset: chainring: chain: pedals: rims: hubs: tires: handlebar: stem: grips: saddle:

Red Devil, alu 6061 single size 26” RST Dirt RA (Gamer26) / RST Dirt (Gamer24) travel 100mm, axle 9mm, 1–1/8” integrated IS42/IS52 Avid BB3, 160mm rotor Samox AF12-D32S 32T Dartmoor Core Dartmoor Candy Dartmoor Raider 26” / 24”, 32H, A/V front: w/sealed bearings, 9mm, 32H rear: w/sealed bearings, freewheel 14T, 32H Innova IA-2128 26x2.2” / IA-2236 24x2.125” Dartmoor Storm Cr–Mo 4130, 700mm, Ø22.2mm Dartmoor Fury v.2, 35mm, Ø22.2mm Dartmoor Evolution Dartmoor Fatty Combo

17


TRAIL

ENDURO size *calc. reach stack fork (mm) (mm) travel

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

HT HT ST BB WB stand- max. **fork (mm) angle angle drop (mm) over tire size travel (mm) (mm) (”)

hub size (mm)

headset type (S.H.I.S)

BB type (mm)

post clamp brake front diam. diam. mount derailleur (mm) (mm) comp.

SMALL (low***)

160

400

606

406

565

540

425

120

65.5o

76.5o

18

1147

785

27.5x2.5 160-170 142x12

IS42/IS52

Euro73

30.9

34.9

SMALL (high***)

160

415

600

406

565

550

425

120

66o

77o

9

1142

788

27.5x2.5 160-170 142x12

IS42/IS52

Euro73

30.9

34.9

MEDIUM (low***)

160

435

606

445

590

582

425

120

65.5o

76.5o

18

1173

785

27.5x2.5 160-170 142x12

IS42/IS52

Euro73

30.9

34.9

MEDIUM (high***)

160

446

600

445

590

592

425

120

66o

77o

9

1171

788

27.5x2.5 160-170 142x12

IS42/IS52

Euro73

30.9

34.9

LARGE (low***)

160

460

606

480

610

613

425

120

65.5o

76.5o

18

1203

785

27.5x2.5 160-170 142x12

IS42/IS52

Euro73

30.9

34.9

LARGE (high***)

160

470

600

480

610

623

425

120

66o

77o

9

1201

788

27.5x2.5 160-170 142x12

IS42/IS52

Euro73

30.9

34.9

* fork travel used for calculating the geometry showed in this table (in millimetres)

** recommended fork travel range (in millimetres)

PM 160mm PM 160mm PM 160mm PM 160mm PM 160mm PM 160mm

*** with use of included offset shock hardware

NEW!

BLACKBIRD

Backbird is a completely new frame in Dartmoor product line for 2017. Designed in collaboration with many top Enduro riders its single pivot suspension design together with the linear frame suspension characteristic makes the frame very sensitive in the entire 160mm travel range. Geometry designed around a low center of gravity and longer front triangle will give you more control than you have ever felt before, setting fast, loose and off camber descents on fire! Dartmoor’s adjustable geometry system gives you the ability to decide the correct settings for your riding style by adjusting the shock length in two different positions. But the Blackbird is not just about descending... Dartmoor have paid attention to the main pivot position ensuring that pedal bob and efficiency are considered, as a result the Blackbird will see you smashing KOM’s whilst pedaling uphill transitions. Blackbird is compatible with standard 142x12mm rear hub spacing.

18

size *calc. reach stack fork (mm) (mm) travel

ST (mm)

TT (mm)

eTT (mm)

CS (mm)

no

SMALL (low***)

130

400

606

400

530

525

430

no

SMALL (high***)

130

410

600

400

530

535

430

no

MEDIUM (low***)

130

435

606

450

555

557

430

no

MEDIUM (high***)

130

445

600

450

555

567

430

no

LARGE (low***)

130

460

606

475

585

582

430

no

LARGE (high***)

130

470

600

475

585

592

430

HT HT ST BB WB stand- max. (mm) angle angle drop (mm) over tire size (mm) (mm) (”) 78o 30 1128 805 27.5x3.0 110 66.5o 29x2.3 78.5o 21 1127 805 27.5x3.0 110 67o 29x2.3 78o 30 1163 805 27.5x3.0 110 66.5o 29x2.3 78.5o 21 1162 805 27.5x3.0 110 67o 29x2.3 78o 30 1188 805 27.5x3.0 110 66.5o 29x2.3 78.5o 21 1187 805 27.5x3.0 110 67o 29x2.3

* fork travel used for calculating the geometry showed in this table (in millimetres)

**fork travel

hub size (mm)

headset type (S.H.I.S)

BB type (mm)

post clamp brake front diam. diam. mount derailleur (mm) (mm) comp.

130-150 148x12

IS42/IS52

Euro73

30.9

34.9

IS

no

130-150 148x12

IS42/IS52

Euro73

30.9

34.9

IS

no

130-150 148x12

IS42/IS52

Euro73

30.9

34.9

IS

no

130-150 148x12

IS42/IS52

Euro73

30.9

34.9

IS

no

130-150 148x12

IS42/IS52

Euro73

30.9

34.9

IS

no

130-150 148x12

IS42/IS52

Euro73

30.9

34.9

IS

no

** recommended fork travel range (in millimetres)

*** with use of included offset shock hardware

NEW! colors: Cyan/Lime; Matt Black options: w/o shock; w/RS Monarch Plus RC3 HV air shock sizes: Small; Medium; Large frame travel: 160mm shock size: 216x63mm shock hardware: 22.2x8mm max. rotor size: 180mm weight: 3.2kg (without shock); 3.55kg (with RS Monarch Plus RC3 HV shock)

BLUEBIRD

Like its bigger brother the Bluebird is a bike designed by mountain bikers for mountain bikers. With 130mm rear travel the Bluebird is the ultimate Trail machine. Its low centre of gravity and long front triangle give a composed confident feel to the rider. Whilst its effective pivot position ensures you will tackle even the longest and most technical climbs with ease. A truly versatile bike which will chew up and spit out anything you throw at it. Like the Blackbird the Bluebird geometry can be adjusted thanks to Dartmoor’s adjust system with included offset shock hardware altering the shock length in two different positions. Bluebird is compatible with the 27.5”+ and 29” wheel sizes and 148x12mm rear hub Boost standard.

colors: Red Devil; Turquoise options: w/o shock; w/RS Monarch RL air shock; sizes: Small; Medium; Large frame travel: 130mm shock size: 190x51mm shock hardware: 22.2x8mm max. rotor size: 180mm weight: 3.0kg (without shock); 3.2kg (with RS Monarch RL shock)

19


ENDURO/FREERIDE

FREERIDE/DOWNHILL size *calc. fork travel

reach (mm)

stack (mm)

ST (mm)

TT eTT CS HT (mm) (mm) (mm) (mm)

HT angle

ST angle

BB drop (mm)

SHORT

200

400

592

410

520

560

430

115

64o

75o

-5

LONG

200

430

592

410

558

590

430

115

64

75

-5

o

* fork travel used for calculating the geometry showed in this table (in millimetres)

ROOTS

o

headset type (S.H.I.S) IS42/IS52 IS42/IS52

BB type (mm)

post clamp brake front diam. diam. mount derailleur (mm) (mm) comp. PM  no Euro73 31.6 34.9 160mm PM  Euro73 31.6 34.9 160mm no

** recommended fork travel range (in millimetres)

The Roots frame is dedicated for going big and rough, the frame is designed for the Downhill Freeriders that hit hard. With 200mm of the progressive rear travel, the Roots will smash any rock garden you can throw at it, while being stable enough to pull that sick whip on an A-Line. The design is well proven and is the perfect choice for anyone looking to custom build a sick rig. Roots can be run with either 27.5” or 26” wheels with the 150x12mm rear hub standard. The frame has a 73mm BB, ISCG-05 mount and tapered head tube for IS42/IS52 headsets. During many months of testing the Roots has been run with both 180mm and 200mm forks and both felt great, the choice is yours.

20

WB max. **fork hub (mm) tire size travel size (”) (mm) 1170 27.5x2.5 26x2.5 180–200 150x12 27.5x2.5 1200 26x2.5 180–200 150x12

colors: Red Devil (red clear coating with black stickers); Black Angel (pearl black with grey stickers) Grey Angel (pearl grey with black stickers) options: w/o shock; w/RS Kage RC coil shock (spring rate 550) sizes: Short; Long frame travel: 200mm shock size: 222x69mm shock hardware: 22.2x8mm max. rotor size: 203mm weight: Short: 3.34kg (w/o shock); 4.34kg (w/ RS Kage); Long: 3.41kg (w/o shock); 4.41kg (w/ RS Kage)

size *calc. fork travel

reach (mm)

stack (mm)

ST (mm)

TT eTT CS HT (mm) (mm) (mm) (mm)

HT angle

ST angle

BB drop (mm)

SHORT

170

410

584

406

535

552

419

115

65o

76o

-4

LONG

170

440

584

431

565

582

419

115

65

76

-4

o

* fork travel used for calculating the geometry showed in this table (in millimetres)

WISH

o

WB max. (mm) tire size (”) 1150 27.5x2.35 26x2.35 1180 27.5x2.35 26x2.35

**fork travel

hub size (mm)

headset type (S.H.I.S)

160–180 135x12

IS42/IS52

160–180 135x12

IS42/IS52

BB type (mm)

post clamp brake front diam. diam. mount derailleur (mm) (mm) comp. PM no Euro73 31.6 34.9  160mm PM no Euro73 31.6 34.9  160mm

** recommended fork travel range (in millimetres)

Your Wish is our command! The second generation of this versatile full suspension frame. This new Wish is at home both Enduro racing, all day riding Trail centers with your mates, even taking on challenging Downhill tracks. A truly diverse platform, the Wish has the ability to run both 27.5” and 26” wheels and our clever pivot positioning makes climbing much easier than its travel suggests. Large pivot bearings and custom hydroformed tubes ensure that both strength and stiffness are not compromised. New Wish comes in two lengths and both of them are longer than the first generation frame. The perfect bike park frame expanded its comfort zone to the high mountains!

colors: Black/Turquoise (pearl black with turquoise stickers); Black/Miami Vice (pearl black with miami vice stickers) options: w/o shock; w/RS Monarch Plus High Volume R air shock; w/RS Kage R coil shock (spring rate 500) sizes: Short; Long frame travel: 170mm shock size: 215x63mm shock hardware: 22.2x8mm max. rotor size: 203mm weight: Short: 3.29kg (w/o shock); 3.61kg (w/ RS Monarch); 4.20kg (w/ RS Kage); Long: 3.35kg (w/o shock); 3.67kg (w/ RS Monarch); 4.26kg (w/ RS Kage)

21


4X/DUAL SLALOM

FREERIDE/ENDURO NEW!

FRAME PROTECTORS

Keep your frame protected with one of our smart products: - Dartmoor branded neoprene chainstay protector, - 3M tape which is excellent to protect your chainstay, - transparent patches sticked on the frame to protect it against scratches and cable rub etc.

NEW!

HORNET

colors: Red Devil; Pearl Black w/green stickers; Matt Black max. rotor size: 203mm sizes/weight: Small (15”): 2.35kg Medium (16”): 2.40kg Large (17”): 2.45kg

One of the world’s most hardcore hardtails has just become even more hardcore! - Hornet has been changed in a real beast. Looking to run fork with 180mm travel? Here you are! Triple crown fork? Why not! Drops, jumps, downhills and freeride is a walk in the park for the new Hornet. As with all of the Dartmoor’s range versatility is a key design brief. The Hornet is capable of running up to 2.8” tires on 27.5” rims! Sharing the same front triangle tubes as our Roots Downhill bike the Hornet really packs a sting!

size *calc. fork travel

reach (mm)

stack (mm)

ST (mm)

TT eTT CS HT (mm) (mm) (mm) (mm)

HT angle

ST angle

BB drop (mm)

WB (mm)

standover (mm)

1151

805

**fork travel

hub size (mm)

headset type (S.H.I.S)

BB type (mm)

27.5x2.8 140–170

142x12

IS42/IS52

Euro73

30.9

34.9

160

405

620

380

585

595

425

120

65o

73o

30

160

430

620

410

603

620

425

120

65

73

o

30

1176

805

27.5x2.8 140–170

142x12

IS42/IS52

Euro73

30.9

34.9

160

450

620

440

626

650

425

120

65o

73o

30

1206

805

27.5x2.8 140–170

142x12

IS42/IS52

Euro73

30.9

HORNET 4X

100

415

570

355

574

589

400

115

68o

73o

28

1076

1076

135x12

IS42/IS52

Euro73

31.6

o

26x2.4

80–130

Hornet 4X is the fusion between the stability and strength of the Dartmoor Hornet and the race proven geometry of our previous 4X machine, the Dartmoor Phantom. The 400mm chain stays and a super stiff rear triangle make this frame amazing out of the gate, while being very snappy and agile enough to fight your way through the competition. Hornet 4X comes in only one size and is compatible with 26” wheels only. colors: Metallic Green; Metallic Red; Glossy Black max. rotor size: 160mm weight: 2.15kg

post clamp brake front diam. diam. mount derailleur (mm) (mm) comp.

HORNET SMALL HORNET MEDIUM HORNET LARGE

* fork travel used for calculating the geometry showed in this table (in millimetres)

22

max. tire size (”)

HORNET 4X

no

34.9

PM 160mm PM 160mm PM 160mm

34.9

IS

no

no no

** recommended fork travel range (in millimetres)

23


ENDURO/TRAIL

ENDURO/TRAIL NEW COLOR!

PRIMAL 27.5

colors: Black/Grey; Red Devil; Black/Miami Vice; Turquoise/Black max. rotor size: 180mm sizes/weight: Small (17”): 2.10kg Medium (18”): 2.15kg Large (19”): 2.19kg XLarge (20”): 2.25kg

Our most popular hardtail trail frame has seen some big improvements for 2016 all of which designed to make the riding experience even better! Lower front triangle together with re-shaped hydroformed tubes have improved lateral stiffness as well as rider comfort and the all-important look of the bike. Available in 4 sizes to suite any rider or rider style! The Primal 27.5 is a bike to take you anywhere!

size *calc. reach stack ST TT eTT CS HT HT ST BB WB stand- max. fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) angle angle drop (mm) over tire size travel (mm) (mm) (”) PRIMAL 27.5 S PRIMAL 27.5 M PRIMAL 27.5 L PRIMAL 27.5 XL PRIMAL PLUS S PRIMAL PLUS M PRIMAL PLUS L

24

**fork travel

PRIMAL PLUS

hub size (mm)

headset type (S.H.I.S)

BB type (mm)

If insane grip is your thing then the Primal Plus is the hardtail Trail bike for you. Primal Plus is a refreshed version of our well known Dartmoor Primal frame for 27.5” wheels but compatible with 27.5”+ or 29” size wheels . Boost 148x12mm rear hub spacing increases stiffness and aid wheel strength and the lowered bottom bracket and top tube aid stand over and stability. Dartmoor Primal Plus is available in 3 sizes so every rider pick the perfect size for height and riding style.

primal 27.5” frame fitting

primal 27.5 PLUS frame fitting

post clamp brake front diam. diam. mount derailleur (mm) (mm) comp.

140

390

625

430

566

581

425

120

67o

73o

40

1100

785

27.5x2.4 130–160 135x10

IS42/IS52

Euro73

30.9

34.9

IS

140

415

625

457

595

606

425

120

67o

73o

40

1126

785

27.5x2.4 130–160 135x10

IS42/IS52

Euro73

30.9

34.9

IS

140

440

625

480

616

631

425

120

67o

73o

40

1151

785

27.5x2.4 130–160 135x10

IS42/IS52

Euro73

30.9

34.9

IS

140

465

625

508

632

656

425

120

67o

73o

40

1176

785

27.5x2.4 130–160 135x10

IS42/IS52

Euro73

30.9

34.9

IS

high clamp high clamp high clamp high clamp

140

400

644

430

580

585

430

115

67o

73o

60

1126

795

IS42/IS52

Euro73

30.9

34.9

IS

no

140

425

644

456

601

610

430

115

67o

73o

60

1151

795

IS42/IS52

Euro73

30.9

34.9

IS

no

140

450

644

482

624

635

430

115

67o

73o

60

1171

795

27.5x3.0 120–150 148x12 29x2.3 27.5x3.0 120–150 148x12 29x2.3 27.5x3.0 120–150 148x12 29x2.3

IS42/IS52

Euro73

30.9

34.9

IS

no

colors: Red Devil; Black/Miami Vice; Cyan/Lime max. rotor size: 180mm sizes/weight: Small (17”): 2.25kg Medium (18”): 2.30kg Large (19”): 2.35kg

xl

am/trail

am/trail am/trail

am/trail am/trail

am/trail am/trail

205

25


In 2015 we came back with the new version of Two4Player frame. Two4Player is since then a true smaller brother of Two6Player frame as it is equipped also with the hydroformed down tube and tapered top tube. With these changes it is as unbreakable as the famous Two6Player. colors: Pearl Black with mirror silver sticker; Petrol painted max. rotor size: 160mm weight: 2.10kg

DIRT/STREET

TWO4PLAYER

NEW!

TWO6PLAYER

The most popular Dirt Jumping frame in the world comes fully refreshed for 2017 with a brand new shape and strength like never before. When tested on the ISO machine with 40% overload new Two6Player survived over 250 000 cycles during the horizontal fatigue test which is the most stringent test to pass for the head tube area. Fresh design and stronger tubes are not the only upgrades. Two6Player is now longer and BB is 5mm lower than before. It has been 10 years now since we designed the first generation of Two6Player frame. We are uber proud and happy that during these 10 years so many thousands of riders have trusted our flagship DJ frame.

size *calc. reach stack ST TT eTT CS HT fork (mm) (mm) (mm) (mm) (mm) (mm) (mm) travel

HT angle

WB (mm)

max. tire size (”)

**fork travel

hub size (mm)

headset type (S.H.I.S)

BB type (mm)

CODY / CODY TAPERED Cody colors: Petrol chrome plated; Red Devil; Miami Vice Cody Tapered color: Matt Black max. rotor size: 140mm weight: 2.26kg

post clamp brake front diam. diam. mount derailleur (mm) (mm) comp.

size *calc. fork travel

reach stack (mm) (mm)

ST (mm)

TT (mm)

Dirt Jumping miracle made of multiple butted, seamless Japanese Cr-Mo 4130 steel tubes. All tubes are heat treated before welding for additional strength. Super smooth dropouts, hydroformed chainstay, hourglass shaped BB and increased wall thickness in the most sensitive areas this frame is plain sick. This is why dirt jumping star Szymon Godziek used it as his weapon of choice for over two seasons. Following riders’ feedback and increasing popularity of the tapered forks dedicated also for the Dirt Jumping we decided to extend the range of the Cody frames with a new option equipped with tapered head tube.

eTT CS HT HT BB WB (mm) (mm) (mm) angle drop (mm) (mm)

max. tire size (”)

**fork travel (mm)

hub size (mm)

headset type (S.H.I.S)

BB type (mm)

post. clamp brake front diam. diam. mount derailleur (mm) (mm) comp.

TWO6PLAYER SHORT TWO6PLAYER LONG

100

400

550

337

556

385

120

69o

74o

25

1048

26x2.35

90–130

135x10

IS42/IS52

Euro73

30.9

34.9

IS

no

CODY

100

400

558

300

570

380

110

69o

15

1040

26x2.35

80–110

135x10

IS42/IS42 Spanish 68

27.2

integr.

IS

no

100

425

550

337

577

385

120

69o

74o

25

1063

26x2.35

90–130

135x10

IS42/IS52

Euro73

30.9

34.9

IS

no

CODY TAPERED

100

400

558

300

570

380

110

69o

15

1040

26x2.35

80–110

135x10

IS42/EC44 Spanish 68

27.2

integr.

IS

no

TWO4PLAYER

100

387

550

300

548

370

115

69o

5

1016

24x2.35

80–120

135x10

EC34/ZS49 EC34/EC49

Euro73

27.2

31.8

IS

no

QUINNE

100

402

543

300

574

383

110

68.5o

0

1050

26x2.35

80–110

135x10

IS42/IS42

27.2

integr.

IS

no

FREAKY

rigid

418

510

255

555

365

110

72.5o

5

966

24x2.1 26x2.1

rigid

110x14

IS42/IS42 Spanish 68

25.4

integr.

pivots

no

* fork travel used for calculating the geometry showed in this table (in millimetres)

26

ST BB angle drop (mm)

colors: Red Devil; Scout Green; Cyan/Lime; Matt Black; max. rotor size: 160mm sizes/weight: Short: 2.20kg; Long: 2.25kg

** recommended fork travel range (in millimetres)

* fork travel used for calculating the geometry showed in this table (in millimetres)

** recommended fork travel range (in millimetres)

Euro 68

27


PARTS & ACCESORIES

PARTS & ACCESORIES

CANDY PRO pedals FEVER v.2 CNC pedals

Ultra light pedals made from cold forged and CNC machined aluminum. Custom body shape with slim, flat profile. Cr-Mo steel axle for stength. 2 sealed bearings and DU-bushing for perfect and smooth rotation. V.2 version comes with the extended axle to increase the Q-factor and riding comfort. Fevers come with 8 removable, black pins per side.

colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Red anod.; Green anod.; Blue anod.; Violet anod. height: 16mm platform size: 90x100mm weight: 395g

Plastic pedals got their bad reputation in the MTB scene due to the low reliability and crappy bearings combined with the high profile design. But now it changed with the Candy Pros! These nylon pedals look different from the first glance. Starting with a low, thin profile, sealed bearings and shark-tooth pins that will give a firm grip for every riding shoe. We have also platforms as spare parts in a full range of colors.

NEW COLOR!

CANDY pedals

Lightweight platform pedals made of nylon. Candy pedals are equipped with ball bearings and axle made of Cr-Mo steel. Candy pedals has the same great feature as Candy Pros - they offer a firm grip for every riding shoe!

colors: Black; Red; Blue; Violet; Coffee Brown - (only Candy) height: 18.5mm (Candy Pro); 25.5mm (Candy) platform size: 111x105mm weight: 270g (Candy Pro); 330g (Candy);

COOKIE pedals STREAM / STREAM PRO pedals

Lightweight alu die casted pedals with perfect grip and strong body design. Cr-Mo steel axle for strength and siffness. 10 pins per side (6 removable). Available in two versions: Stream Pro - with sealed bearing and DU-bushing; Stream - with ball bearings. 28

Lightweight pedals made of nylon with Cr-Mo steel axle, ball bearings, knurled surface and 12 molded pins per side for maximum traction. colors: Red Devil; Miami Vice; Black painted; Turquoise painted; White painted height: 18mm platform size: 90x95mm weight: 445g

colors: Black; Red; Green; Blue; Violet; Graphite height: 23mm platform size: 90x95mm weight: 315g 29


PARTS & ACCESSORIES

Top quality headset with integrated top and bottom parts. IS42/IS52 S.H.I.S. type. Ultra low profile top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. They come with two steel crown races, one for tapered and second for 1-1/8” forks. Dartmoor frames compatibility: Blackbird, Bluebird, Roots, Wish 2015-2017, Hornet 2017, Hornet 2014-2016, Hornet 4X, Primal 27.5, Primal 27.5+, Primal 2015, Primal 29, Two6Player 2017, Gamer26, Gamer24. colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.

FLASH headset Top quality headset with external top part and zero stack (semi-integrated) bottom part. EC34/ZS49 S.H.I.S. type. Cups and top cover made of 2014 aluminium. Upper cup drilled for weight reduction with ultra low profile top cover. Bottom cup with integrated 1-1/8” reduction. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. Dartmoor frames compatibility: Wish 2012/2013, Shine, Two6Player 2012-2016, Two4Player 2015-2017, Hornet 2012/2013, Phantom 2012/2013. colors: Red Devil; Black anod.; Turquoise anod.; Green anod.; Violet anod.

PARTS & ACCESORIES

BLINK headset

PRIME headset

BLAZE headset

Top quality headset with integrated top and bottom parts. IS42/IS42 S.H.I.S. type. Top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. Dartmoor frames compatibility: Cody, Ghetto, Quinnie, Freaky. DartBMX frames compatibility: Thug, Nami, Yuki. colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; Silver polished

Top quality headset with external top and bottom parts. EC34/EC49 S.H.I.S. type. Cups and top cover made of 2014 aluminium. Both cups drilled for weight reduction. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. They come with two steel crown races, one for tapered and second for 1-1/8” forks. Dartmoor frames compatibility: Wish 2012/2013, Shine, Two6Player 2012-2016, Two4Player 2015-2017, Hornet 2012/2013, Phantom 2012/2013. colors: Red Devil; Black anod.

ASTRO headset

Top quality headset with zero stack (semi-integrated) top and bottom parts. ZS44/ ZS56 S.H.I.S. type. Cups and ultra low profile top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. They come with two steel crown races, one for tapered and second for 1-1/8” forks. color: Black anod. model

top part type (S.H.I.S)

bottom part type (S.H.I.S)

fork steerer type

upper bearing size (mm)

BLINK

IS42

IS52

tapered/ standard 1-1/8”

PRIME

IS42

IS42

standard 1-1/8”

ASTRO

ZS44

ZS56

tapered/ standard 1-1/8”

30

Top quality headset with integrated top part and external bottom part. IS42/EC44 S.H.I.S. type. Ultra low profile top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. They come with two steel crown races, one for tapered and second for 1-1/8” forks. Dartmoor frames compatibility: Cody Tapered. colors: Black anod.; Red anod.

bottom stack height (mm)

*weight (g)

model

5.4

0

72

5.4

0

61

2.8

120

bottom bearing size (mm)

upper ht inside diam. (mm)

bottom ht inside diam. (mm)

stem clamp

crown race seat diam. (mm)

41.8x30.5x8

52x40x8

42

52.1

28.6

39.79/30.015

41.8x30.5x8

41.8x30.5x8

42

42

28.6

30.015

41x30.15x7

52x40x8

44

55.95

28.6

39.79/30.015

9

* weight including one crown race and excluding top cap/bolt/star nut

HYBRID headset

top stack height (mm)

top part type (S.H.I.S)

bottom part type (S.H.I.S)

fork steerer type

upper bearing size (mm)

bottom bearing size (mm)

upper ht inside diam. (mm)

bottom ht inside diam. (mm)

stem clamp

FLASH

EC34

ZS49

standard 1-1/8”

41x30.15x7

BLAZE

EC34

EC49

41x30.15x7

HYBRID

IS42

EC44

tapered/ standard 1-1/8” tapered/ standard 1-1/8”

41.8x30.5x8

crown race seat diam. (mm)

top stack height (mm)

41.8x30.5x8

33.95

49.61

52x40x8

33.95

49.61

52x40x8

42

44

bottom stack height (mm)

*weight (g)

28.6

30.015

12.7

2.8

109

28.6

39.79/30.015

12.7

13.2

126

28.6

39.79/30.015

5.4

14.3

107

* weight including one crown race and excluding top cap/bolt/star nut

31


PARTS & ACCESSORIES

Apart of the complete headsets fitting all Dartmoor frames and many other popular head tube standards on the market we are offering now also several types of only upper headset parts and only bottom headset parts separately. This way it makes possible to collect desired headset for even more exisiting head tube standards on the market. Cups and top cover made of 2014 aluminium. High quality precision sealed 45/45 bearings with anti-rust titanium coating and special high density grease protecting against water penetration. Each set of upper parts includes Ride Your Way top cap with star nut. color: Black anod.

KEEPER ISCG BASH chain guide

Lightweight chain device for ISCG mount. It works with the single chainring and keeps the chain in the right place without fail! Dedicated for the Enduro and All Mountain riding. Additional integrated bashguard protects the chainring against rock strikes. BB adapter is not included but available as spare part. color: Black anod. size: 30T-38T options: ISCG-05 weight: 102g

KEEPER ISCG chain guide ZS44/28.6

IS42/28.6

Extremely light chain device for ISCG mount. It works with the single chainring and keeps the chain in the right place. Dedicated for the Enduro and All Mountain riding. BB adapter is not included but available as spare part.

ZS49/28.6

color: Black anod. options: ISCG-05

UPPER PARTS

EC34/28.6

part type (S.H.I.S)

bearing size (inches)

bearing size (mm)

head tube diameter (mm)

stack height (mm)

*weight (g)

IS42/28.6

IS42

1-1/8”

ZS44/28.6

ZS44

1-1/8”

41.8x30.5x8

42

5.4

36

41x30.15x7

44

9

47

ZS49/28.6

ZS49

1-1/8”

41.8x30.5x8

49.61

9

79

EC34/28.6

EC34

1-1/8"

41x30.15x7

33.95

12.7

48

EC49/38.1

EC49

1.5”

52x40x8

49.61

18.7

95

size: 30T-38T weight: 42g

KEEPER chain guide The Keeper does what is says on the box, it keeps the chain on! It is a simple idea for those who want to run a single ring. Compatible with the 31.8mm and 34.9mm seat tube diameters.

* weight excluding top cap/bolt/star nut

color: Black anod.

BOTTOM PARTS part type (S.H.I.S)

bearing size (inches)

bearing size (mm)

head tube diameter (mm)

IS42/30

IS42

1-1/8”

41.8x30.5x8

42

IS52/40

IS52

1.5”

52x40x8

52.1

ZS49/30

ZS49

1-1/8”

41.8x30.5x8

49.61

ZS56/40

ZS56

1.5”

52x40x8

EC49/40

EC49

1.5”

52x40x8

crown race size (inches)

stack height (mm)

*weight (g)

1-1/8”

0

29

1-1/8”; 1.5”

0

39

1-1/8”

2.8

62

55.95

1-1/8”; 1.5”

2.8

55

49.61

1-1/8”; 1.5”

13.2

78

* weight including one crown race

IS42/30

IS52/40

ZS49/30

weight: 44g

TRAIL chain guide EC49/40

Chain guides do not need to cost more than your whole drive train. Lightweight and durable Trail chain devices are the perfect examples of this. They are built for the proper FR and DH abuse. With aluminium body plus the ability to bolt on a bashguard, this guide will take care of things when you hit the trails! Trail One chain guide has a bashguard included. BB adapter is not included but available separately as other replacement parts. colors: options: size: weight:

32

PARTS & ACCESORIES

UPPER/BOTTOM headset parts

ZS56/40

Black anod.; Turquoise anod.; Red anod. ISCG-05; ISCG-OLD (ISCG-03) 32T-42T 189g (Trail One); 143g (Trail Two)

SIMPLE chain guide Single lower arm chain guide with CNC holes pattern in backplate for weight reduction. Backplate made of aluminium. Roller with sealed bearing. Together with bashguard may be used for double chainring drive. BB adapter is not included. colors: Black anod.; Red anod. options: ISCG-05; ISCG-OLD (ISCG-03) weight: 95g (ISCG-05); 85g (ISCG-OLD) 33


NEW!

TRIBE mtb cranks

Hi-end 2-pcs MTB crankset with an integrated 24mm axle and external bottom bracket included. The crankarms made using hollow forged aluminium technology. 24mm hollow axle increases the rigidity and strength of the crank while reducing the weight. The 10-splines design combined with 2-bolt left arm guarantees a really strong connection. Bearings are additionally sealed and filled with a waterproof high quality grease and built to last!

INTRO n-w chainring Simply shaped MTB narrow-wide chainring made of 7075 T6 aluminium. Offering superb chain retention! Available in 2 most popular sizes.

NEW!

DIRECT n-w chainring

Narrow wide direct mount chainrings fitting Dartmoor Tribe cranks and compatible with SRAM direct mount standard. Available for Boost chainline and for standard MTB chainline. Made of aluminium 7075. Offering the same fantastic chain retention property’s as our Trail or Intro rings, but for SRAM direct mount interfaces.

Tribe cranks are sold without a chainring but direct mount chainrings for a standard MTB chainline or Boost chainline fitting direct mount interface in the crank are available separately.

color: arms lenght: spindle: splines: weight:

PARTS & ACCESORIES

NEW!

Black anod. 175 mm 24mm 10 w/o chainring: 634g w/28T: 686g; (without external bearings) color: Black anod. sizes: 32T; 34T weight: 42g (32T); 56g (34T)

color: Black anod. sizes: Boost: 28T; 30T; 32T Standard MTB: 28T; 30T; 32T; 34T weight: 52g (28T); 62g (30T); 64g (32T)

TRAIL narrow-wide chainring One of the lightest MTB narrow-wide chainrings on the market. Made of the 7075 aluminium with fully CNC machining. Thanks to the special teeth shape Trail may be used as a single chainring without a chain guide. From 2016 Trail chainring will be available also in 30T size which is becoming so popular now.

ROCK mtb cranks MTB cranks which fit well with our Freeride, All Mountain and Enduro frames. 2-pcs construction cranks with an integrated 24mm axle make them trustworthy and trouble-free. The 10-splines design combined with 2-bolt left arm guarantees a really strong connection. They come with a dedicated 36T aluminium chainring and an external bottom bracket fully compatible with the Shimano standard and frames with 68mm or 73mm BB shells. If you look for MTB cranks that will not ruin your budget and will look cool on your bike Rock is for you! 34

colors: Black anod.; Red anod.; Turquoise anod. arms lenght: 175 mm spindle: 24mm splines: 10 spindle bolt: M18xP1.0 weight: 915g (without external bearings)

colors: Petrol chrome plated; Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod.; Orange anod.; Graphite anod. sizes: 30T; 32T; 34T; 36T BCD: 104mm thickness: 4mm weight: 45g (30T), 36g (32T); 45g (34T); 57g (36T)

35


PARTS & ACCESSORIES

High end 2-pcs cranks made of heat-treated Cr-Mo 4130 steel with spindle welded to the right arm. RHD/LHD compatible. With 2 sprocket holes to fit all sprocket sizes, 2 spindle bolts (alu 7075 T6 and Cr-Mo) and assembly/disassembly tool. Available with two spindle lengths: – 160mm (Thorn MTB) designed to work with Euro external bearings (like Dartmoor Euro eX BB 22mm) with 68mm or 73mm BB shells to create an extra strong and efficient combination with frames like Two6Player; – 150mm (Thorn BMX) perfectly working with Spanish or MID BB equipped frames as well as standard Euro BB to minimize number of required spacers for such kind of frames and keep correct chain line.

colors: Petrol chrome plated; Red Devil; Matt Black; Brushing chrome plated arms lenght: 170mm

spindle: 22mm hollow weight: 745g (with alu spindle bolt); 763g (with Cr–Mo spindle bolt) splines: 48 spindle bolt: 5/8”x24T (8mm Allen key)

KEIPO / KEIPO EX bmx 3-pcs cranks Keipo is our 3-pcs cranks made of heat-treated Cr-Mo 4130 steel. They are RHD/LHD compatible and have two sprocket holes to fit all sprocket sizes. Set includes arms, spindle, separate spare parts. Keipo eX are the special version of Keipo cranks dedicated for those who have frames with Euro BB shell like Two6Player and have faced many problems with weak standard Euro bearings. Keipo eX brings a solution to this problem. With much bigger bearings offered by the external Euro bearings, you get the strength of a Spanish BB while keeping the ease of fitting any normal Euro bottom bracket. External Euro BB comes in a set with Keipo eX.

colors: Keipo: Matt Black; Matt Blue Keipo Ex: Raw clear coated arms lenght: 175mm spindle: 19mm hollow splines: 16

STAR bmx cnc sprocket

3-pcs strong, entry level cranks made of heat-treated Cr-Mo 4130 steel seamless tubes. Chukka Two includes arms, spindle, Cr-Mo spindle bolts, sprocket bolt and pinch bolts.

The Star sprocket will really set off your dream build, with its cool flowing lines nicely CNC machined from a block of 7075 aluminium. This high end sprocket with 10 spokes design will come in a set with alu adapters for both most popular spindle diameters.

colors: arms lenght: spindle: splines: spindle lenght: spindle bolts: pinch bolts: weight:

colors: Petrol chrome plated; Red Devil; Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod. sizes: 23T; 25T; 28T; 33T teeth: 1/8” bore: 15/16” thickness: 6mm adapter: 19mm and 22mm included weight: 56g (23T); 66g (25T); 80g (28T); 97g (33T)

Matt Black; White painted 175mm 19mm 8 145mm M8x1.25mm M7x1.0mm 1100g

PEACOCK bmx sprocket

Peacock sprocket is a perfect example of the affordable parts from our collection which will not ruin your budget but will give you a comfort of riding the safe and tested bike stuff. The Peacock is a strong aluminium sprocket made of the stamping mold with CNC machined teeth.

spindle lenght: Keipo: 138mm Keipo Ex: 148mm spindle bolts: M12x1mm (6mm Allen key) pinch bolts: M6x1mm weight: Keipo: 835g Keipo Ex: 995g (including Euro eX BBs)

FLARE bmx 2.5-pcs cranks Light and strong 2.5-pcs cranks made of heat-treated Cr-Mo 4130 steel with 19mm spindle and 48 splines. Flare cranks are RHD/LHD compatible, have two sprocket holes to fit all sprocket sizes and include arms, spindle (pressed into the right arm), Cr-Mo spindle bolt, 2 sprocket bolts and assembly tool.

36

CHUKKA TWO bmx cranks

colors: Matt Red; White painted arms lenght: 170mm

spindle: 19mm hollow splines: 48

PARTS & ACCESORIES

THORN MTB/BMX 2-pcs cranks

spindle bolt: M12x1mm (6mm Allen key) weight: 814g

TRANCE bmx cnc sprocket Fully CNC machined sprocket made of 7075 T6 aluminium with 8 spokes design. It comes in a set with alu adapters for both most popular spindle diameters.

colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Graphite anod. sizes: 23T; 25T; 28T teeth: 1/8” bore: 15/16” thickness: 6mm adapter: 19mm and 22mm included weight: 56g (23T); 65g (25T); 90g (28T)

colors: Black anod.; Turquoise anod; Green anod.; Red anod.; Violet anod. sizes: 25T; 28T teeth: 1/8” bore: 15/16” thickness: 6.35mm adapter: 19mm included weight: 78g (25T); 84g (28T)

37


NEW!

PARTS & ACCESORIES

PARTS & ACCESORIES

REEL PRO singlespeed

CORE LIGHT chain

Ultralight MTB singlespeed rear hub equipped with 10T or 13T driver with 6 pawls system and 72 engagement points. The pawls system is extremely durable and reliable. The hub is equipped with 4 highest quality sealed bearings with custom selected Mobile waterproof grease and custom designed full contact seals with Dartmoor logo for the best mud and dust protection. The hub is assembled in a frame with a female system using 15mm 7075-aluminium inner axle and tightened by hollow 3/8” Cr-Mo bolts. Side caps on both sides are also made of 7075 aluminium.

Lightweight nickel-plated chain with hollow pins and drilled side plates. Masterlink included. Nano-coated color options.. colors: Silver; Green metallic; Red metallic; Blue metallic; Violet metallic; Orange metallic lenght: 102 links width: 1/8” tensile strength: 12750N weight: 226g (for 72 links)

CORE chain

Strong chain with drilled top side plates. Masterlink included. Painted color options. colors: Silver; Titanium Black; Black painted; Red painted; Green painted; Blue painted; Violet painted; White painted lenght: 102 links width: 1/8”; 3/32” tensile strength: 12750N weight: 276g (for 72 links)

colors: Petrol chrome plated; Black anod size: 135x10mm bearings: 4 precision sealed bearings with high density grease, full contact sealings bearings body: 6902 type: driver: 15267/6902 hub-shell: alu 6061–T6 axle: 15mm, alu 7075–T6 bolts: hollow Cr–Mo 3/8”x24T, heat-treated

cones: alu 7075–T6, push–in (both sides) driver: Cr–Mo 1-pcs, 10T / 13T pawls: 6 pawls design with 6 individual double springs

engag.points: 72 holes: 32H weight: 390g (10T); 405g (13T)

NEW!

PRO BB

Pro Series of our bottom bracket bearings available in Euro eX, Euro, Spanish and MID standards in both sizes: 19mm and 22mm. Pro series BBs include top quality bearings and refined cones that reduce the amount of spacers needed for installation. Two inner sleeves for 68mm and 73mm shells and a set of alu spacers included.

diameter: 19mm; 22mm weight: Euro eX: 159g (19mm); 139g (22mm); Euro: 127g (19mm); 93g (22mm); Spanish: 117g (19mm); 86g (22mm); MID: 168g (19mm); 154g (22mm) 38

REEL singlespeed

INTRO BB

Lightweight MTB singlespeed rear hub equipped with 10T driver with reliable 3 pawls system. The hub is equipped with 5 sealed bearings with custom selected Mobile waterproof grease and full contact seals. The hub is assembled in a frame with a female system using 15mm 7075-aluminium inner axe and tightened by solid 3/8” Cr-Mo bolts. Side cap on the left side is made of aluminium 7075 and on the right side is made of Cr-Mo steel.

Intro Series of our bottom bracket bearings available in Euro, Spanish and MID standards in 19mm size. Our Intro series BBs are dedicated for the entry level riders with affordable price. Two inner sleeves for 68mm and 73mm shells and a set of spacers included.

diameter: 19mm weight: Euro: 142g; Spanish: 135g; MID: 184g

colors: Black anod. size: 135x10mm bearings: 5 precision sealed bearings with high density grease, full contact sealings

bearings type: hub-shell: axle: bolts:

body: 6902 driver: 6802 alu 6061–T6 15mm, alu 7075–T6 solid Cr–Mo 3/8”x24T, heat-treated

cones: driver: pawls: engag.points: holes: weight:

alu 7075–T6 / Cr-Mo Cr–Mo 1-pcs, 10T 3 pawls 38 32H 418g 39


NEW!

REEL PRO cassette

NEW!

REEL PRO 102 cassette

colors: Petrol; Black anod. sizes: 135/142x12mm; 148x12mm bearings: 4 precision sealed bearings with high density grease full contact sealings bearings type body: 6902 freehub: 15267/6902 hub-shell: alu 6061–T6 axle: 15mm, hard anodized alu 7075–T6 cones: alu 7075–T6, push–in (both sides)

colors: Petrol; Black anod. sizes: 135/142x12mm bearings: 4 precision sealed bearings with high density grease full contact sealings bearings type body: 6902 freehub: 6902 hub-shell: alu 6061–T6 axle: 15mm, hard anodized alu 7075–T6 cones: alu 7075–T6, push–in (both sides) freehub: alu 7075-T6; SRAM XD also available pawls: 6 pawls with 6 individual springs engag. points: 102 holes: 32H weight: 320g (135/142x12mm)

freehub: alu 7075-T6; SRAM XD also available pawls: 6 pawls with 6 individual springs engag. points: 72

holes: 32H weight: 275g (148x12mm); 265g (135/142x12mm)

NEW!

REEL cassette As with all our hubs reliability is key! Designed for Enduro, All Mountain and Freeride use. Equipped with reliable steel freehub with 3 pawls system. It has 4 high quality sealed bearings with custom selected Mobile waterproof grease and full contact seals. Available in 148x12mm Boost size and popular 135/142x12mm size.

NEW!

BEARINGS for hubs Highest quality sealed bearings with custom selected Mobile waterproof grease and custom designed full contact seals with Dartmoor logo for the best mud and dust protection. Available in 6804 LLU and 6902 LLU bearing types.

40

PARTS & ACCESORIES

Reel Pro is the ultralight MTB rear hub with a 7075 aluminium freehub equipped with 6 pawls system and 72 engagement points. It has 4 highest quality sealed bearings with custom selected Mobile waterproof grease and custom designed full contact seals with Dartmoor logo for the best mud and dust protection. Reel Pro hub is available in 135/142x12mm and 148x12mm Boost size. Hub with SRAM XD freehub version is also available.

Reel Pro 102 is our range topping rear hub. Equipped with super strong 6 pawls system with 102 engagement points immediately transferring each medal move. Each pawl has 3 teeth catching the ratchet ring in the same time so during each of the 102 clicks the pawls catch the ratchet ring in 18 points (6 pawls x 3 teeth). It has 4 highest quality sealed bearings with custom selected Mobile waterproof grease and custom designed full contact seals with Dartmoor logo for the best mud and dust protection. This hub is available in 135x12mm size with 142x12mm spare side caps included. Hub with SRAM XD freehub version is also available.

colors: Black anod. sizes: 148x12mm; 135/142x12mm bearings: 4 precision sealed bearings with high density grease full contact sealings bearings type: body: 6902 freehub: 6902 hub-shell: alu 6061–T6 axle: 15mm, Cr-Mo cones: alu 7075–T6, push–in (both sides) freehub: Cr-Mo pawls: 3 pawls engag.points: 34 holes: 32H weight: 435g (148x12mm); 423g (135/142x12mm)

41


REEL PRO front

REVOLT cassette

Ultralight MTB front hub equipped with 2 highest quality sealed bearings with custom selected Mobile waterproof grease and custom designed full contact seals with Dartmoor logo for the best mud and dust protection. Reel Pro front hub is available in Boost 110x15mm size and standard MTB 100x15mm size with 110x20mm spare side caps included. Reel Pro is not only one of the lightest gravity front hubs on the market but also one of the best looking hubs. Asymmetrical design with a bigger right side flange and cut-outs to save weight put this hub among the best ones in his league.

The affordable rear cassette hub featuring 4 precision sealed bearings, 15mm axle and push-in cones made of aluminium 7075. The lightweight alu 7075-T6 freehub is equipped with 6 pawls.

colors: Petrol chrome plated; Black anod. sizes: 110x15mm; 100x15mm/110x20mm; bearings: 2 precision sealed bearings with high density grease full contact sealings bearings type: 6804 weight: 189g (110x15mm); hub-shell: alu 6061–T6 181g (100x15mm); cones: alu 7075–T6 175g (110x20mm) holes: 36H; 32H

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod.; Orange anod. sizes: 150x12mm; 135x12mm; 135x10mm bearings: 4 precision sealed bearings

PARTS & ACCESORIES

NEW!

bearings type: hub-shell: axle: bolts:

body: 6902 freehub: 15267/6902 alu 6061–T6 15mm, hard anodized alu 7075–T6 hollow Cr-Mo 3/8”x24T, heat-treated (only in 135x10mm female option)

cones: freehub: pawls: engag. points: holes: weight:

alu 7075–T6, push–in (both sides) alu 7075-T6; SRAM XD also available 6 pawls with a single spring 24 32H 291g (150x12mm); 276g (135x12mm); 350g (135x10mm)

NEW!

REEL front disc / non disc Reliable front hub to use for Enduro, All Mountain, Freeride and Dirt Jumping. Equipped with 2 high quality sealed bearings with custom selected Mobile waterproof grease and full contact seals. Available in Boost 110x15mm size, standard MTB 100x15mm size with spare 110x20mm side caps and in Non Disc version with 110x20mm and 100x15mm side caps in a set.

colors: Petrol chrome plated; Black anod. sizes: 110x15mm; Disc 100x15mm/110x20mm Non Disc 100x15mm/110x20mm; bearings: 2 precision sealed bearings with high density grease full contact sealings bearings type: 6804 hub-shell: alu 6061–T6 weight: 199g (110x15mm); cones: alu 7075–T6 189g (100x15mm); 183g (110x20mm); 176g (Non Disc 100x15mm); 170g (Non Disc 110x20mm) holes: 36H; 32H 42

REVOLT disc 20 / disc 15

REVOLT PRO disc 20 / disc 15

Revolt Disc 20 and Revolt Disc 15 are the choice for those who rather prefer affordable parts than the lightest ones. These 20mm and 15mm through axle hubs with the disc brake mounts have a body made of 6061 aluminium and are equipped with 2 good quality sealed bearings.

Revolt Pro Disc 20 and Revolt Pro Disc 15 are the hi-end through axle front hubs equipped with high end Japanese EZO sealed bearings. Asymmetrical design with a bigger right side flange with lightweight cuts and a smaller left side flange together with clean lines put this hub among the best ones.

colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod.; Orange anod. size: 110x20mm (Revolt Disc 20); 100x15mm (Revolt Disc 15) bearings: 2 precision sealed bearings bearings type: 6804 (Revolt Disc 20); 6902 (Revolt Disc 15) hub-shell: alu 6061–T6 cones: alu 7075–T6 holes: 36H; 32H weight: 205g (Revolt Disc 20); 180g (Revolt Disc 15)

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Red anod. size: 110x20mm (Revolt Pro Disc 20); 100x15mm (Revolt Pro Disc 15) bearings: 2 EZO precision sealed bearings bearings type: 6804 (Revolt Pro Disc 20); 6902 (Revolt Pro Disc 15) hub-shell: alu 6061–T6 cones: alu 7075–T6 holes: 36H; 32H weight: 165g (Revolt Pro Disc 20); 160g (Revolt Pro Disc 15) 43


SNIPER 27.5” wheels

REVOLT v.2 tubeless ready rim

Super strong hi-end gravity 27.5” wheels based on our top quality level Revolt v.2 rims. Perfect for Freeride, Enduro and All Mountain - also for those who show no mercy to their wheels! Rear wheel is equipped with Revolt Cassette hub with 4 sealed bearings and 2 pairs of side caps included: 135x12mm and 142x12mm. Front wheel is equipped with Revolt Disc hub with 2 sealed bearings and 2 pairs of side caps included: 100x15mm and 110x20mm.

Lightweight and super cool looking 27.5” Enduro, Trail and All Mountain wheels based on our high end Sniper rims. Rear wheel is equipped with Revolt Cassette hub with 4 sealed bearings and 2 pairs of side caps included: 135x12mm and 142x12mm. Front wheel is equipped with Revolt Disc hub with 2 sealed bearings and 2 pairs of side caps included: 100x15mm and 110x20mm.

This hi-end gravity rim has our custom designed profile to cope with the most demanding requirements of Downhill, Freeride, Enduro, Dirt Jumping and Street riding. Made using top quality 6066 T6 aluminium with a super strong sleeved joint connection. To combine the great performance with a perfect look for the Revolt v.2 we use hi-end water stickers and premium color options including black in perfect matt as well as Miami Vice and Red Devil to match many of our frames in these outstanding color schemes. Revolt v.2 can be used as tubeless ready rim.

colors: Matt Black anod.; Matt Turquoise anod. size: 27.5” holes: 32

colors: Red Devil; Matt Black anod. size: 27.5” holes: 32 weight rear wheel: 1144g weight front wheel: 1048g

weight rear wheel: 1040g weight front wheel: 944g

colors: Red Devil; Miami Vice; Matt Black anod. sizes: 27.5”; 26” holes: 36; 32 height: joint: sleeved ERD: outer width: 33.5mm OSB: inner width: 27mm weight:

SHIELD 26” wheels

Super strong 26” wheels based on our high end Shield rims. Perfect for Dirt Jumping, Slopestyle and Skatepark riding! Rear wheel is equipped with Revolt Singlespeed hub with 5 sealed bearings and 10T driver. Front wheel is equipped with Revolt Disc hub with 2 sealed bearings and 2 pairs of side caps included: 100x15mm and 110x20mm. colors: Red Devil; Matt Black anod. size: 26” holes: 32 weight rear wheel: 1127g weight front wheel: 1031g

44

AIRCRAFT 27.5+ wheels

27.5”+ wheels based on our Aircraft rims and Boost standard hubs. Rear wheel is equipped with 148x12mm size hub with 4 sealed bearings. Front wheel is equipped with 110x15mm size hub with 2 sealed bearings. With these wheels you can use up to 3.0” wide tires and mount them in our Primal Plus and Bluebird frames or any other Boost standard frames or forks. color: Black anod. size: 27.5” + holes: 32

weight rear wheel: 1246g weight front wheel: 1094g

PARTS & ACCESORIES

PARTS & ACCESORIES

REVOLT 27.5” wheels

22mm 559mm (27.5”); 534mm (26”); 1.7mm 619g (27.5”); 595g (26”)

SNIPER tubeless ready rim Our Snipers are definetely one of the best Enduro, Trail and All Mountain dedicated rims on the market! With sleeved joint connection, low weight, great stiffness, perfect durability, sexy look and really affordable price - Sniper should be the rim you are looking for your new wheels! For the Sniper rim we use hi-end water stickers and post-bending matt anodizing in wide range of colors. Sniper can be used as tubeless ready rim.

colors: Matt Black anod.; Matt Turquoise anod.; Matt Green anod.; Matt Red anod.; Matt Violet anod. sizes: 29”; 27.5”; 26” holes: 32 joint: sleeved outer width: 30.5mm inner width: 24mm height: 21mm ERD: 559mm (27.5”); 534mm (26”); OSB: 0.75mm weight: 515g (27.5”); 485g (26”) 45


NEW COLOR!

NEW!

AIRCRAFT PRO tubeless ready rim The rim which is nearly as wide as an aircraft carrier! Dedicated to carry up to 3.0” wide tires. 27.5+ standard was created not for those who always want to be first but for those who want to enjoy a whole range of mountain bike experience - all terrain and all conditions, even riding on sand or snow. And Aircraft Pro rim fits perfectly this philosophy - it will never disappoint anyone looking for adventures on the pathless tracks. Aircraft Pro rim has a single-chamber construction with a sleeve connection technology and will be available in post-bending black matt anodizing finish or painted Red Devil, Miami Vice or Cyan-Lime color schemes. Aircraft Pro can be used as tubeless ready rim. colors: Red Devil; Miami Vice; Cyan/Lime; Matt Black anod. sizes: 27.5”+ holes: 32

joint: outer width: inner width: height: ERD:

sleeved 50mm 45mm 22mm 556mm

OSB: 0,85mm weight: 610g (anodized); 720g (painted)

Our custom designed disc brake rim is dedicated for those gravity riders who prize the strength and durability above all else. Shield is back to our roots of wide and strong rims dedicated for the most aggressive riding! Perfect for Downhill, Freeride or Dirt Jumping. The rim is made of the 6061 T6 aluminium with a strong sleeved joint connection. Thanks to its wide profile the tire stays safe on the rim even when riding through tight berms at low pressure. The thick side walls and wide lips minimize the risk of pinch flats. For the Shield rim we use hi-end water stickers and post-bending matt anodizing or premium painted colors including Red Devil, Miami Vice or new Cyan-Lime. Shield can be used as tubeless ready rim.

Gravity rim aimed at the riders looking for a great value and strength without the weight penalty. It is designed to cope with many disciplines including Enduro, All Mountain, 4X and even Pumptrack. Second generation of Rocket rim looks great thanks to the hi-end water stickers and perfect matt anodizing finishes. colors: Matt Black anod.; Matt Turquoise anod.; Matt Green anod.; Matt Red anod.; Matt Violet anod. sizes: 29”; 27.5”; 26” holes: 32 joint: pinned

NEW!

RAIDER/ RAIDER v.2 rim

Our ever popular entry level rim used in the last 10 years by thousands of gravity riders. Perfect for all those who look for very affordable but still strong rim for Dirt Jumping, Street, 4X or even Enduro riding. Made of 6061 aluminium with double wall construction and pinned joint. Now available also with new stickers design as Raider v.2.

Raider colors: Raider v.2 colors: sizes: holes: joint: outer width: inner width: height: ERD:

outer width: inner width: height: ERD:

28mm 22.4mm 18.3mm 605mm (29”); 567mm (27.5”); 542mm (26”) OSB: 0.75mm weight: 584g (29”); 545g (27.5”); 518g (26”)

PARTS & ACCESORIES

PARTS & ACCESORIES

colors: Red Devil; Miami Vice; Cyan/Lime; Matt Black anod.; Matt Turquoise anod.; Matt Green anod.; Matt Red anod.; Matt Violet anod. sizes: 27.5”; 26”; 24” holes: 36; 32 joint: sleeved outer width: 33mm ERD: 556mm (27.5”); 531mm (26”); 479mm (24”) inner width: 25.6mm OSB: 1.5mm height: 22mm weight: 633g (27.5”); 602g (26”); 550g (24”)

46

ROCKET v.2 rim

SHIELD tubeless ready rim

Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.;

Black anod.; White painted 27.5”; 26”; 24”; 20” 36; 32 pinned 31.4mm 24mm 21mm 562mm (27.5”); 537mm (26”); 485mm (24”); 384mm (20”) OSB: 1.5mm weight: 580g (27.5”); 550g (26”); 500g (24”); 405g (20”)

NEW!

FORTRESS/FORTRESS v.2 rim Popular strong rim for Dirt Jumping, Street and BMX made of 6061 aluminium. Double wall construction with pinned joint and side wall for V-Brake or U-Brake. Now available also with new stickers design as Fortress v.2.

Fortress colors: Fortress v.2 colors: sizes: holes: joint: outer width:

Turquoise anod.; Green anod.; Blue anod.; inner width: Violet anod.; Gold anod.; Graphite anod. height: ERD: Black anod.; Red anod.; White painted 26”; 24”; 20” OSB: 36; 32 weight: pinned 32.4mm

25mm 21mm 537mm (26”); 485mm (24”); 384mm (20”) 1.5mm 670g (26”); 595g (24”); 485g (20”) 47


FURY v.3 stem

NEW SIZE!

RAGE v.3 stem

New for 2017 our third version of our direct mount Rage stem comes in two bar bore sizes: 31.8mm and 35mm. Thanks to the semi-integrated front plate style we were even able to save some weight, whilst still keeping the construction strong! Rage v.3 stem comes with beautiful combination of matt anodized colors with glossy stickers.

Fury stem is used for all kinds of gravity riding from Dirt Jumping to heavy Freeride. Fury is one of the best do it all stems in our product range! Investing in cold forged technology made it to be not only stronger but also a lot more affordable than before! Fury v.3 is a direct continuation of Fury v.2 stem with totally new graphics printed on the stem.

colors: Black anod.; Turquoise anod.; Red anod.

color: Black anod. bar bore: 25.4mm; 31.8mm; 35mm extension: 35mm (25.4mm); 45mm (31.8mm, 35mm)

bar bore: 31.8mm; 35mm extension: 45-50mm weight: 129g (35mm)

31.8mm; 35mm

25.4mm; 31.8mm; 35mm

NEW!

NEW SIZE!

FUNKY v.2 stem

SHORTY stem

31.8mm; 35mm colors: Petrol; Black anod.; Turquoise anod.; Red anod.

bar bore: 31.8mm; 35mm extension: 32mm weight: 105g (31.8mm); 125g (35mm)

Available in 31.8mm and 35mm bar bore size the Shorty stem is our stem designed for Enduro, All Mountain and Downhill riders. As the fashion for longer, slacker bikes with wider and wider bars has emerged the need for shorter stems to maintain steering compliance. Shorty is also one of these parts that will add a unique style to your bike thanks to the special semiintegrated front plate construction.

weight: 154g (25.4mm); 175g (31.8mm); 168g (35mm)

bolts: 25.4mm/31.8mm: M6x22mm (x6) 35mm: M5x25mm (x4); M6x22mm (x2)

PARTS & ACCESORIES

NEW!

Our hi-end stem is made of cold forged and CNC machined 6061 aluminium. Funky is one of the lightest gravity stems on the market with cool and unique look thanks to the smooth lines of its body shape and 2-pcs front plate design. Funky v.2 is a direct continuation of Funky stem with totally new graphics printed on the stem.

31.8mm

color: Black anod. bar bore: 31.8mm extension: 40mm (31.8mm)

bolts: 31.8mm: M6x20mm (x4); M6x18mm (x2) weight: 170g (31.8mm)

TRAIL v.2 stem

With our experience in designing some of the most reliable stems for the hardcore users, we made something that suits those who are still in the gravity family but prefer endurance type of riding. Our aim was to offer a light but stiff stem so we went for an octagonal shape both on the inside and outside curves. It’s what makes Trail stiffer than a regular stem, while looking like no other. Designed for 31.8mm bars and coming in two extension sizes: 50mm and 65mm. This stem will perfectly suit your next Trail, Enduro or All Mountain bike! colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod.

48

bar bore: 31.8mm extension: 50mm; 65mm weight: 127g (50mm); 146g (65mm)

FUNKY stem

25.4mm; 31.8mm

Our hi-end stem is made of cold forged and CNC machined 6061 aluminium. Funky is one of the lightest gravity stems on the market with cool and unique look thanks to the smooth lines of its body shape and 2-pcs front plate design.

31.8mm

colors: Petrol chrome plated; Red Devil; Miami Vice; Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Gold anod.; Graphite anod.; Silver polished; White painted

bar bore: 25.4mm; 31.8mm extension: 35mm (25.4mm); 40mm (31.8mm)

bolts: 25.4mm: M6x18mm (x6); 31.8mm: M6x20mm (x4); M6x18mm (x2) weight: 148g (25.4mm); 170g (31.8mm) 49


NEW!

LIGHTNING CARBON handlebar

NITRO DH v.2 / FR v.2 handlebar

Lightweight and super strong Downhill/Freeride handlebar made of butted 7075 aluminium. Wide and comfortable with perfect shape for those who search for the out of bounds experience. Designed for the 31.8 mm stems only Nitro bars should fit needs of all hard hitters. Nitro v.2 is a direct continuation of Nitro bars with totally new graphics printed on the handlebar.

Ultralite and strong carbon handlebar in the new 35mm bar bore standard. 800mm wide with 1” rise and 230g weight! It is everything what Enduro, Freeride or Downhiller wants from a bar.

35mm

800mm

color: diameter: width: rise: upsweep: backsweep: weight:

Black 35mm 800mm 1” 4.5° 9° 230g

NITRO DH v.2 rise: 0.5” colors: Red Devil; upsweep: 5° Black anod. backsweep: 9° diameter: 31.8mm weight: 320g width: 780mm

NEW!

LIGHTNING LOW / HI handlebar Our 800mm wide handlebar in a super strong 35mm standard which is perfect for the Freeride and Downhill riders. Lightning is made of butted 7050 aluminium. Despite the big size and outstanding strength this handlebar with its 299g definitely belongs to the featherweight division. For 2017 Lightning will be available in two rise versions: Low with 1” rise and Hi with 2” rise. LIGHTNING LOW colors: Red Devil; Miami Vice; Black anod.; Turquoise anod.; Red anod. diameter: 35mm

width: 800mm rise: 1” upsweep: 5.5°

31.8mm

780mm

PARTS & ACCESORIES

NEW!

NITRO FR v.2 colors: Red Devil; Black anod. diameter: 31.8mm width: 780mm rise: 1.5” upsweep: 4° backsweep: 9° weight: 345g

backsweep: 8° weight: 299g

NITRO FR handlebar First generation of our hi-end 31.8 mm Nitro bars with increased rise to meet requirements of many Freeride and Downhill riders. Nitro FR is made of the hi-end butted 7075 aluminium series.

LIGHTNING HI colors: Red Devil; Miami Vice; Black anod.; diameter: 35mm width: 800mm 50

35mm rise: 2” upsweep: 5.5°

backsweep: 8° weight: 310g

colors: Petrol chrome plated; Miami Vice; Black anod.; Turquoise anod.; Red anod.; Orange anod.; White painted diameter: 31.8mm width: 780mm rise: 1.5” upsweep: 4° backsweep: 9° weight: 345g

800mm 31.8mm

780mm 51


NEW!

PARTS & ACCESORIES

TORNADO v.2 handlebar

Strong bars made of butted and fully heat treated Cr-Mo 4130 steel to survive any street riding abuse you will put on them. High rise and proper geometry will make riding at your favourite street spots much more comfortable now. Toxic v.2 is wider than before - now it has 750mm and it comes also with totally new graphics printed on the handlebar.

If you look for the affordable and reliable bars and you are not a weight weenie then Tornado is for you. It is made of the 6061 aluminium with simpler butting to keep the weight in line with the price. This bar was designed with input from our riding experience, so it keeps the best shape and angles to provide you a safe ride. From the streets of big cities to the deep woods and mountain ranges, Tornado will take you anywhere. Tornado v.2 is a direct continuation of Tornado bars with totally new graphics printed on the handlebar.

31.8mm

750mm

colors: Petrol chrome plated; Black painted; diameter: 22.2mm width: 750mm rise: 3.5” upsweep: 5° backsweep: 8° weight: 415g

colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Violet anod. diameter: 31.8mm width: 750mm rise: 1.5” upsweep: 4° backsweep: 9° weight: 430g

22.2mm

PARTS & ACCESORIES

TOXIC v.2 handlebar

NEW!

750mm

NEW!

SWING LOW v.2 / HI v.2 handlebar

Swings are our very popular lightweight bars made of butted 7075 aluminium. 750 mm wide with a 2” rise (Swing Low) or 3.5” rise (Swing Hi) makes them a perfect choice for any type of gravity riders who prefer 25.4mm standard. The wide angle bendings ensures the proper freestyle look. Swing Hi v.2 is wider than before - now it has 750mm and both Swings come in a second generation with totally new graphics printed on the handlebar. SWING LOW v.2 rise: 2” colors: Petrol chrome plated; Black anod.; upsweep: 6° diameter: 25.4mm backsweep: 7° width: 750mm weight: 385g

SWING HI v.2 color: Black anod.; diameter: 25.4mm width: 750mm rise: 3.5”

upsweep: 6° backsweep: 7° weight: 395g

25.4mm 52

750mm

53


PARTS & ACCESORIES

PARTS & ACCESORIES NEW COLOR!

MAZE single side lock-on grips

ROOTS lock-on grips Roots grips are our answer to the needs of the gravity riders. The idea was to develop grips that will be thicker and softer than other grips on the market. With surface design showing mountains turning into the tree roots they not only look great but are ergonomically linked with the structure of the hand. The grips come into their own in wet DH and Freeride tracks but our testers found them good enough even for Enduro or Dirt Jumping. colors: Black; Green; Red; Turquoise; Purple; Graphite

lenght: 130mm diameter: 32mm

weight: 123g (w/aluminium side caps); 117g (w/plastic side caps)

ICON lock-on grips 54

Lightweight and comfortable MTB grips with lock-on alu clamps and Ride Your Way alu bar ends. 145 mm length gives you plenty of room for barspins and other tricks. Special compound material used for these grips make them durable and comfortable. Icon grips come with alu bar ends for better handlebar protection.

colors: Black; Green; Red; Turquoise; Orange; Graphite lenght: 145mm diameter: 32mm weight: 138g (with clamps/bar ends)

Maze are the single side lock-on grips which offer the locking feature but without a plastic core under the whole length of the grips. The hard plastic sleeve is only on a short distance below the single lock-on ring. This way you keep all the advantages of the lock-on grips, such as staying in place safely, ability to remove them quickly and easily and preventing the mud to get under the rubber. Whilst retaining a much lighter weight and thick rubber for better comfort without increase of the outer diameter. The pattern of the rubber is made of the thin and soft lines creating a kind of the labirynth shape. Perfect for the Enduro and All Mountain but great also for Dirt Jumping or even Downhill in dry conditions.

colors: Cyan/Lime; Miami Vice; Black; Green; Red; Turquoise; Purple; Graphite lenght: 137mm diameter: 31.5mm weight: 107g (w/aluminium side caps); 101g (w/plastic side caps)

RACE lock-on grips

EVOLUTION bmx grips

Classic MTB grips with lock-on alu clamps and mushroom pattern. Made of kraton.

Classic BMX grips with high flange and mushroom pattern. Made of kraton.

colors: lenght: diameter: weight:

Black; Red 130mm; 145mm 31.5mm 122g (145mm with clamps/plugs)

colors: lenght: diameter: weight:

Black; Red; Purple 147mm 30mm 151g (with bar ends) 55


One of the lightest disc rotors on the market. Made of stainless steel. High abrasion and temperature resistance. Special design provides fast heat dissipation.

Lightweight seat clamp made of CNC machined aluminium. colors: Black anod.; Turquoise anod.; Green anod.; Red anod.; Blue anod.; Violet anod.; Orange anod.; Gold anod.; Graphite anod.

diameter: 31.8mm; 34.9mm weight: 18g (31.8mm); 20g (34.9mm)

NEW COLORS!

colors: Silver; Black; Red; Blue; Gold size: 140mm; 160mm weight: 68g (140mm); 86g (160mm)

BLOCK flangeless bmx grips Soft flangeless grips made of durable compound comfortable for both, gloves users and people who prefer to ride with bare hands. Low profile, multiple direction Tetris blocks style pattern offers a perfect grip for better control. As you know every player needs a proper joystick to enjoy the game, so we included a very special nylon bar ends. They are made of two sections to fit both Cr-Mo and alu bars and their pad controller looking design tease you to start the game now!

colors: Cyan/Lime; Miami Vice; Black; Green; Red; Turquoise; Purple; Brown; Transparent lenght: 155mm diameter: 29mm weight: 96g (with bar ends)

BLOCK bar ends Push style bar ends with a unique design fitting all the inner diameter sizes of the different handlebars. Made of two sections, with different diameter size, and a cutting line between them. If uncut these bar ends fit perfectly Cr–Mo MTB and BMX bars. After cutting they can be used for aluminium bars with thicker walls.

thin wall bar

SHAMANN bmx grips High flanges grips made of special rubber compound with increased durability and extra softness for very comfortable using. Plastic bar ends included. colors: Black, Green; Red; Turquoise; Purple; Graphite 56

RING seat clamp

lenght: 150mm diameter: 30mm weight: 154g (with bar ends)

PARTS & ACCESORIES

PARTS & ACCESORIES

NANO rotor

colors: Black; Green; Red; Turquoise; Purple; Transparent weight: 16g

NEW!

BEAM CARBON/ BEAM ALU seatpost Lightweight, comfortable and durable seat post with a single-bolt head assembly for easy adjustment. Available in 2 versions: Beam Carbon with post made of carbon fibre; Beam Alu with post made of 6061 aluminium.

colors: Black material: carbon fibre; alu 6061 diameter: 30.9mm; 31.6mm length: 350mm weight: 205g (carbon); 260g (alu)

NEW SIZE!

FUSION seatpost

Pivotal seat post. Made of 6061 aluminium. Available in short and long version and several length and diameter options.

colors: Black anod.; Red anod.; Blue anod. diameter: 25.4mm; 27.2mm, 30.9mm; 31.6mm length: 130mm (25.4mm); 200mm (27.2/30.9mm); 400mm (27.2/30.9/31.6mm) weight: 116g (25.4mm); 140g (27.2/200mm); 240g (27.2/400mm); 300g (30.9mm); 310g (31.6mm)

thick wall bar

57


PARTS & ACCESORIES

PARTS & ACCESORIES

NEW!

PRIMAL seat

Primal is our Enduro specific saddle. Thanks to the special cover printing design emphasizing all what we really like in the mountain biking syle of life it combines a cool freeride look with a racing shape. This saddle is both lightweight and with strong base construction plus hollow Cr-Mo rails. Primal is equipped with a new front bumper to our custom design. Its special shape helps to prevent the rails and bottom part of material when transporting your bike on the lifts. colors: Black, Red Devil; Miami Vice, Grey

seat size: 276x138mm weight: 285g

TRAIL v.2 seat

Our comfortable Trail saddle with a new cool look thanks to the waterproof leather-style cover with embossed logo pattern known before from Primal saddle. Trail is equipped with a new front bumper to our custom design. Its special shape helps to prevent the rails and bottom part of material when transporting your bike on the lifts. color: Black

FATTY COMBO seat

New version of our extra thick foam padded combo saddle comes now in all black leather-style finish or red devil full printing option. Cover is made now of 4 pieces of material for better fit and the double stitching with Ride Your Way logo makes the classic look.

colors: seat size: seat post size: weight:

Black; Red Devil 230x143mm 27.2x200mm 356g

seat size: 260x129mm weight: 258g

TRAIL RACING seat Enduro and Trail dedicated saddle with racing look and waterproof cover for quick and easy cleaning. Now for 2017 it comes with improved material strength. Trail Racing is equipped with a new front bumper to our custom design. Its special shape helps to prevent the rails and bottom part of material when transporting your bike on the lifts. colors: Black-Black; Black-Red; Black-Turquoise; Black-Miami Vice; seat size: 260x129mm weight: 247g

58

FATTY PIVOTAL seat

Extra thick foam padded Pivotal seat comes now in all black leather-style finish or red devil full printing option. Cover of the Fatty seat is made now of 4 pieces for better fit and the double stitching with Ride Your Way logo give it a truly stylish look. colors: Black; Red Devil seat size: 234x142mm weight: 329g

LITE COMBO seat

New version of our slim combo saddle comes now in all black leatherstyle finish or red devil full printing option. Cover of the Lite Combo seat is made now of 4 pieces for better fit and the double stitching with Ride Your Way logo makes the classic look. colors: seat size: seat post size: weight:

Black; Red Devil 222x125mm 27.2x200mm 265g 59


CLOTHING

Long sleeve technical jersey for Enduro and All Mountain made of the soft, flexible, quick drying and breathable polyester fabric. There is a microfibre cloth from the inner side which can be used for cleaning your goggles. Slim fit but you can still use the thermal underwear beneath. Made in Poland !! color: Blue; Gray sizes: S–L

NEW!

CHECKER tech shirt Technical long sleeve shirt made of the thick but breathable polyester material. Casual look with technical features. Perfect for the colder days. Made in Poland !!

color: Green Checkered sizes: S–XL

60

RIDE YOUR WAY tech hoodie Technical hoodie made of the thick but breathable polyester material. Covered with waterproof layer (lasts for 20 washings). Perfect for the colder days. Slim fit without front pocket for increased safety when making tricks. Made in Poland !!

color: Graphite/Lime sizes: S–XL

DARTMOOR hoodie Regular hoodie made of the high quality cotton with 340g/m2 weight. Perfect for the colder days. Slim fit without a front pocket for increased safety when making tricks on your local dirt jumping spot. Made in Poland !!

colors: Turquoise; Gray sizes: S–L

DARTMOOR tech tee

NEW!

RIDE YOUR WAY tech tee

Technical t-shirt made of the super soft and quick drying material with perfect flexibility and breathability. There is a microfibre cloth from the inner side which can be used for cleaning your goggles. Loose fit like the casual t-shirt but with extended back. Made in Poland !!

Technical t-shirt made of the super soft and quick drying material with perfect flexibility and breathability. There is a microfibre cloth from the inner side which can be used for cleaning your goggles. Loose fit like the casual t-shirt but with extended back. Made in Poland !!

colors: Black/Miami Vice; Turquoise/Blue sizes: S–XL

colors: Cyan/Lime; Black/Grey sizes: S–XL

KAMLOOPS tech tee

STRONG ROOTS tank top

Technical t-shirt made of the soft, flexible, quick drying and breathable polyester fabric. There is a microfiber cloth from the inner side which can be used for cleaning your goggles. Loose fit like the casual t-shirt but with extended back. Made in Poland !!

Technical tank-top made of the soft, flexible, quick drying and breathable polyester fabric. There is a microfibre cloth from the inner side which can be used for cleaning your goggles. Loose fit like the casual tank-top but with extended back. Made in Poland !!

color: Black sizes: S–XL

CLOTHING

WOODS jersey

NEW!

color: Black/Miami Vice sizes: S–XL

61


CLOTHING

Regular t-shirt made of the high quality cotton with 180g/m2 weight. Made in Poland !!

RIDE YOUR WAY tee Regular t-shirt made of the high quality cotton with 180g/m2 weight. Made in Poland !!

VERN Comfortable and lightweight knee pads with anatomically fitted design offering very good protection at a very affordable price! No need to take off your shoes to wear it. With durable fabrics used in crucial areas and with hard shells to protect your knees.

PROTECTION & ACCESORIES

ROCK WAY tee

colors: Red-Black, sizes: M; L A (mm)

colors: Black; White sizes: S–XL

C (mm)

M

274

317

195

L

294

327

205

A

B

color: Green sizes: S–XL

B (mm)

C A S 254 mm M 274 mm L 294 mm

NEW!

RIDE YOUR WAY

Comfortable and lightweight socks made of quick drying technical material.

colors: Red/Black; Black/Grey; Cyan/Lime sizes: 38-40; 41-43; 44-46

SNAKE

Long finger gloves. Made of rip-proof fabrics. Well ventilated. Anti-slip silicone dot pattern on the inside of the palm. colors: White-Black; Graphite-Black sizes: S–XXL

B

C

307 mm 317 mm 327 mm

185 mm 195 mm 205 mm

SHAFT Comfortable shin pads with anatomically fitted design. Mounted with 4 straps - without taking your shoes off . Flexible inner pad combined with EVA foam for maximum comfort. Made of highly breathable special version of strong neoprene material. With a super strong and durable fabric on the front, covering the inner pad. colors: Red-Black, sizes: M; L

A (mm)

B (mm)

M

449

290

C (mm) 319

L

459

290

329

B

A

C

62

A M 449 mm L 459 mm

B

C

290 mm 290 mm

319 mm 329 mm

63


dart moor-bikes.com

facebook .dar tmoo r-bikes.com

instagram. dart moor-bikes.com

Dartmoor 2017 catalog - short version  

Dartmoor 2017 catalog - short version but including all new and most of continued products.