Sheet – partners and funding Search PhD Thesis – Biocomposites in an Advanced Manufacturing Process for Ecological Fibrous Architectures. Damien Comolli--Miramont Tél : +33651698359 Mail : damiencomolli31200@gmail.com
Abstract. Fiber-reinforced polymer (FRP) composites have profoundly transformed industrial practices by combining low weight, versatility, and structural performance. Among manufacturing processes, filament winding makes it possible to orient and distribute fibers according to applied loads, thereby optimizing material use. Over the past twelve years, the adaptation of this process to architecture through digital design and robotic fabrication has given rise to Robotic Coreless Filament Winding (RCFW) and Spatial Filament Winding (SFW), considerably expanding geometric, structural, and functional possibilities. However, these developments remain constrained by fabrication capabilities, which still limit access to complex, non-developable, or asymmetrical geometries. Expanding the process’s formal and applicative capabilities consequently raises questions about the resources and materials involved. In this respect, plant-based fibers offer advantages in terms of renewability, embodied energy, and carbon storage. However, their combination with polymer matrices raises challenges relating to interfacial adhesion, compatibility, and aging. This thesis therefore proposes to approach these transformations not merely as constraints, but as design parameters, by mutually evolving filament-winding processes and bio-based, biodegradable composites reinforced with plant-based fibers. The objective is to develop and share a design methodology that brings together manufacturing processes, materials science, mechanics, and ecodesign, in order to consider fabrication, use, aging, and end of life as interconnected aspects of a single process. This approach could pave the way for new construction systems and architectural designs that fully integrate the temporalities and dynamics of living systems. Bio-receptive architectural components and other applications of bio-regenerative ecology will be developed as demonstrators to assess potential advances.
© D a m i e n C o m o l l i - - M i ra m o nt - To u s d ro i t s ré s e r vé s .
Detailed description. From the 1940s onwards, advances in the chemical industry and the development of composite materials, particularly fibre-reinforced polymers (FRP), profoundly transformed industrial manufacturing practices. These materials combine the lightness of polymer matrices with the mechanical performance of fibrous reinforcements, opening the way to applications in sectors as diverse as aerospace, energy, transport and infrastructure. Among the processes used to shape them, filament winding (FW) holds a particular place: it deposits continuous resin-impregnated fibres along controlled paths around a mandrel, producing tubular or axisymmetric structures optimised for the mechanical loads they must bear. The value of this process lies in its repeatability, its potential for automation and its ability to align fibres precisely with load paths. By controlling the orientation, density and pattern of deposition, the amount of material needed for a given load-bearing capacity can be significantly reduced. Over the past twelve years or so (first occurrence in the scientific literature: Knippers
et al., Polymers – Opportunities and Risks II, Springer, 2014), these principles have gradually been transferred to architecture and construction, notably through the integration of digital design tools and robotic fabrication. This evolution gave rise to robotic coreless filament winding (RCFW) processes, mainly Coreless Filament Winding (CFW) and Spatial Filament Winding (SFW) (Institute for Computational Design ICD and Institute for Building Structures and Structural Design ITKE – University of Stuttgart). Despite these advances, current RCFW strategies remain limited by the assembly and anchoring systems they rely on. By its very constructive logic, CFW retains a strong affinity with geometries relatively close to surfaces of revolution or developable surfaces (examples: Hybrid Flax Pavilion 2024 – ICD ITKE, Fibrous Tectonics 2022 – ICD ITKE, Fibre House 2021 – ICD ITKE, BUGA Fibre Pavilion 2019 – ICD ITKE), whereas SFW is mainly used as spatial trusses or structural exoskeletons (examples: Fibre Facade 2018 – ICD ITKE, ULTRALEICHTBAUSITZ 2019 – csi GmbH, ITECH M.Sc. Spatial Winding 2019 – ICD ITKE). As geometric complexity increases, structures must be broken down into sub-compo1
Fiche recherche de financements - Thèse - biocomposites et architectures fibreuses - Damien Comolli--Miramont - 2026
nents, which multiplies anchoring points, fabrication operations and the resources required. This constraint currently prevents the process from addressing certain closed, non-developable or highly organic architectural forms (dendritic branching structures, rhizomes, etc.). Incrementally extending the formal possibilities of coreless filament winding therefore appears to be a major lever for broadening its range of potential applications.
Combining synthetic matrices with natural fibres, whose life cycles are opposite, forces the latter to follow the law of the more stable component. Indeed, without any possibility of disassembly (depolymerisation, solvolysis or mechanical separation), the fibre is denatured, since its life cycle remains largely dependent on that of its matrix.
© D a m i e n C o m o l l i - - M i ra m o nt - To u s d ro i t s ré s e r vé s .
From a holistic perspective aimed at rethinking design and fabrication methods in sensitive sectors such as construction and architecture, the characterisation of sustainable materials becomes central. The thesis project’s commitment to addressing environmental impact leads it to pay particular attention to natural fibre-reinforced composites. Since the mid-twentieth century, plant fibres have increasingly been incorporated into polymer-matrix composites because of several attractive properties: they are renewable, have relatively low embodied energy, and store CO₂ as they grow. Some natural fibres also offer high mechanical properties and, in certain configurations, greater vibration-damping potential than mineral or synthetic fibres.¹ Their use in robotic fabrication processes thus makes it possible to develop fibrous architectures that combine structural performance, low mass and greater reliance on renewable resources. Filament winding relies on the continuous placement of fibres along defined paths, which makes it possible to exploit their anisotropy² and to adapt the material locally to the loads it bears. Fibre morphology, orientation and distribution thus become design variables in the same way as overall geometry. In the case of plant fibres, this relationship is reinforced by their hierarchical structure: the mechanical properties of the composite depend not only on its physico-chemical composition, but also on the organisation of the fibres and their behaviour under surrounding stresses.
However, a bio-based reinforcement is not enough to make a composite environmentally sustainable. A fundamental difficulty lies in combining natural fibres with polymer matrices, which are often derived from fossil resources and behave very differently in terms of ageing and end of life. The matrices commonly used in natural fibre composites, notably polyvinyl chloride (PVC), polyethylene (PE) and polypropylene (PP)³, remain petroleum-based and non-renewable. Moreover, the hydrophilic and polar nature of plant fibres creates compatibility issues with matrices that are generally non-polar. This fibre/matrix interface governs a large part of the composite’s performance and therefore constitutes both a scientific and a technical obstacle.⁴ ⁵ The thesis is set within this context and proposes to examine jointly the potential evolution of the robotic filament winding process and of the composite materials it uses. The hypothesis put forward is that extending the formal and constructive capabilities of RCFW cannot be separated from a reflection on the life cycle of its constituent materials. The research therefore does not consider the composite merely as a high-performance material to be shaped, but as a material system whose design must integrate the conditions of fabrication, use, ageing and end of life. The thesis addresses the possibility of designing eco-designed fibre composite architectures whose fabrication logic, mechanical performance and life cycle are conceived together. In particular, it seeks to move beyond an approach in which integrating natural fibres is simply a substitution of material within an existing process. Instead, it will determine to what extent the specific properties of the fibre/biopolymer pairing, its anisotropic behaviour, its organisation within a construction system and its evolution over time can become active design parameters. Durability is therefore a second central axis of the research. Biocomposites are subject to interdependent degradation mechanisms: moisture absorption, oxidation, hydrolysis, UV exposure, thermal variations and mechanical stresses. These phenomena can gradually alter their properties and load-bearing capacity.⁶ Rather than treating this degradation solely as a defect to be minimised, the thesis proposes to also consider it as data that can inform design. Ageing could thus become a parameter for differentiating the temporalities, uses and transformation scenarios of an architecture. This hypothesis opens up a reflection on the very notion of durability in architecture and design. Today, for instance, making again, making new, no longer seems self-evident in construction, given what we know about the impact of exploiting finite resources. What if the means of existence of tomorrow were integrated into natural ecosystem logics so as to minimise their impact on the environment, or even make it positive? The longevity of structures conceived through new construction systems must be reconsidered according to the intended use scenarios. In some cases, an ephemeral, demountable or biodegradable architecture could
2
Fiche recherche de financements - Thèse - biocomposites et architectures fibreuses - Damien Comolli--Miramont - 2026
prove more environmentally relevant than a permanent one requiring more material, energy or maintenance. The question then becomes one of fit between the nature of the materials, constructability and the life scenario. The thesis will explore this relationship by treating the life cycle not as a constraint external to the project, but as a genuine design space. This reflection also requires distinguishing between several notions that are frequently confused in design and architectural practice today. The terms «biomaterial», «bioplastic», «bio-based», «biodegradable» and «compostable» do not refer to the same properties. A material may be derived from plant resources without being biodegradable, while a polymer may be biodegradable without necessarily being bio-based. Scientific method thus becomes an essential condition for assessing the real environmental performance of materials in these emerging disciplines. The research aims to establish a scientific and terminological framework that better connects knowledge from materials science with architectural and design practice. The thesis will thus seek to relate three levels usually studied separately: the robotic fabrication process, the behaviour of the composite material, and the life cycle of the system according to targeted use scenarios. The first level concerns the development of winding and assembly strategies to broaden the geometric scope of RCFW. The second concerns the formulation and characterisation of composites combining natural fibres with suitable bio-based and/or biodegradable matrices, particularly with regard to their mechanical behaviour, drapability, permeability and ageing. The third concerns the evaluation of design choices in terms of the added value they bring in one or more targeted use contexts.
© D a m i e n C o m o l l i - - M i ra m o nt - To u s d ro i t s ré s e r vé s .
The aim is therefore not only to produce a new material or a new process, but to build a design method capable of bringing these different dimensions into dialogue. Design is understood here as a transdisciplinary practice that connects knowledge from fields as varied as materials science, robotics, digital fabrication, architecture and ecology.
The thesis thus aims to contribute to a shift in the paradigm of architectural fabrication: the material is no longer considered merely as a passive medium for expressing form, but as an actor in the project, whose properties, transformations and temporalities take part in defining the architecture.
Partners. The project is supported by the innovation branch of the European Flax and Hemp Alliance (Alliance for European Flax-Linen & Hemp), represented by Bruno Pech (see Appendix 1). Beyond their role in dissemination and mediation, their position at the heart of the network of producers and manufacturers in the Normandy technical flax sector would help speed up industrial collaborations. Among many others, Terre de Lin Technique and Lincore have already been approached and could support the project with their expertise. In Rouen, the GPM laboratory (Groupe de Physique des Matériaux) and its Disordered Systems and Polymers department, represented by Ms. Antonella Esposito and Allisson Saiter, are committed to supervising me under a doctoral contract of at least 36 months. The PhD would focus on developing biopolymers whose mechanical performance and physico-chemical behaviour suit the architectural context described above, provided that full funding is secured (see Appendix 2). We are also in contact with the FIBRAs laboratory at TU/e (Eindhoven University of Technology) through researcher and lecturer Marta Gil-Pérez, who specialises in digital fabrication processes for fibrous architectures. Her involvement would round out the support, especially for integrating advanced technologies such as robotic arms and an RCFW production line.
1.
Process Guide as an entry gate to European Flax-Linen & Hemp composite manufacturing – The enlarged European Scientific Council of the Alliance for European Flax-Linen & Hemp, March 2026.
2.
Process Guide as an entry gate to European Flax-Linen & Hemp composite manufacturing – The enlarged European Scientific Council of the Alliance for European Flax-Linen & Hemp, March 2026.
3.
M. Carus, A. Eder, «WPC and natural fibre composites: market and trends in Europe», JEC Composites Magazine, no. 89, 2014, pp. 23–26.
4.
D. dos Santos Rosa, M. R. Calil, C. das Graças Fassina Guedes, C. E. O. Santos, «The Effect of UV-B Irradiation on the Biodegradability of Poly-β-Hydroxybutyrate (PHB) and Poly-ε-Caprolactone (PCL)», Journal of Polymers and the Environment 9, 2001, pp. 109–113. DOI: 10.1023/A:1020498710586
5.
L. Soccalingame, Étude des scénarios de fin de vie des biocomposites : vieillissement et retransformation de biocomposites PP/farine de bois et PLA/fibres de lin [Study of end-of-life scenarios for biocomposites: ageing and reprocessing of PP/wood flour and PLA/flax fibre biocomposites], 2014.
6.
Praveen et al., «Effect of aging on the biopolymer composites: Mechanisms, modes and characterization», Polymer Composites, May 2022, show that ageing under UV radiation can reduce the tensile strength of biopolymer composite fibres by up to 37% and their shear strength by up to 19%.
3
Fiche recherche de financements - Thèse - biocomposites et architectures fibreuses - Damien Comolli--Miramont - 2026
© D a m i e n C o m o l l i - - M i ra m o nt - To u s d ro i t s ré s e r vé s .
Annexe 1.
4
Fiche recherche de financements - Thèse - biocomposites et architectures fibreuses - Damien Comolli--Miramont - 2026
Annexe 2.
Antonella ESPOSITO Maître de Conférences Hors Classe HDR Tél. (33) 02 32 95 50 83 E-mail : antonella.esposito@univ-rouen.fr
Rouen, 15 juillet 2026
Objet : Lettre de soutien au projet de doctorat de M. Damien COMOLLI-MIRAMONT Madame, Monsieur, Enseignante-chercheuse à l’Université de Rouen Normandie depuis 2010, avec rattachement au Groupe de Physique des Matériaux (GPM) UMR CNRS 6634, j’ai rencontré M. Damien COMOLLI-MIRAMONT pour la première fois en février 2026. M. COMOLLI-MIRAMONT avait fait la démarche de prendre contact avec le GPM, et plus particulièrement avec Mme Allisson SAITER-FOURCIN, responsable du département Systèmes Désordonnés et Polymères (SDP), afin de mieux connaître nos activités de recherche et le parc instrumental à notre disposition. Mme SAITER-FOURCIN nous a mis en relation. Nous avons rapidement convenu d’un RDV pour que M. COMOLLI-MIRAMONT puisse nous parler de son projet et visiter le laboratoire. C’est alors que nous avons pris connaissance de son projet de doctorat, inspiré de problématiques environnementales (restauration des zones humides) et potentiellement intéressant pour le design d’architectures complexes ainsi que pour la valorisation de ressources renouvelables, telles que les fibres naturelles et les polymères issus de la biomasse. Au vu de l’originalité et de l’interdisciplinarité de la démarche scientifique proposée par M. COMOLLIMIRAMONT ; de l’engagement de mon établissement (l’Université de Rouen Normandie a reçu en 2020 le label DD&RS, récompensant un engagement de plus de 15 ans en faveur du développement durable et de la responsabilité sociétale) ; de mon engagement en tant que scientifique (depuis mon recrutement, je me suis intéressée à la caractérisation et valorisation des fibres naturelles d’abord, puis à la caractérisation physique en relation avec les propriétés de polymères biosourcés et/ou biodégradables) ; de la position géographique du GPM (la Normandie est l’une des régions de France et d’Europe à produire les plus de fibres naturelles, in primis le fibres de lin) ; de l’urgence de développer des solutions concrètes permettant une meilleure protection de l’environnement (les zones humides, tel que les tourbières, sont mises à mal par le réchauffement climatique, mais d’autres écosystèmes pourrait bénéficier des solutions développées au cours de ce projet) ; je ne peux que soutenir un tel projet et saluer les démarches déjà effectuées par M. COMOLLI-MIRAMONT vis-à-vis des laboratoires de recherche, des financeurs potentiels, et des collectivités.
© D a m i e n C o m o l l i - - M i ra m o nt - To u s d ro i t s ré s e r vé s .
Titulaire d’une Habilitation à Diriger des Recherches (HDR) depuis le 11 juillet 2025, je m’engagerais sans réserve dans la direction de thèse de M. COMOLLI-MIRAMONT, seule ou en co-direction avec un(e) autre chercheur/chercheuse ou enseignant(e)-chercheur/chercheuse, français(e) ou étranger/étrangère selon les conditions prévues par le projet et les exigences de l’organisme financeur, à condition qu’une allocation doctorale environnée soit obtenue pour un tel projet, et sous réserve d’obtention des autorisations d’accès au laboratoire GPM (classé ZRR). Veuillez agréer, Madame, Monsieur, l’expression de ma considération la plus respectueuse. Antonella ESPOSITO
Laboratoire Groupe de Physique des Matériaux (GPM) UMR CNRS 6634 Département Systèmes Désordonnés et Polymères (SDP) Université de Rouen Normandie - UFR Sciences et Techniques Technopôle du Madrillet - Avenue de l'Université 76801 St-Etienne-du-Rouvray Cedex - France
5