Page 14 • Dairy Star • Saturday, June 28, 2014
RUMEN DEVELOPMENT –
A transformation that can lead to a lifetime of profitability development. Within this age, calves achieve 50 percent of
KLEIN NOTES FIVE REQUIREMENTS TO ACHIEVE OPTIMAL RUMEN DEVELOPMENT:
their lifetime height and 25 percent of their lifetime weight.
1.
Substrate (a high quality grain mix)
2.
Liquid (water, saliva)
3.
Establishment of bacteria in the rumen
4.
Absorptive ability of the tissue (papillae)
5.
Outflow of material from the rumen (muscular action)
The first six months of life are critical to calf growth and ®
According to Dr. Katie Klein, dairy research scientist with Purina Animal Nutrition, a primary driver to achieving these early growth goals is feeding a diet that promotes rumen development through 24 weeks of age. Over the course of an animal’s life, the rumen undergoes a fascinating transformation, developing from being sterile, smooth and roughly the size of a softball, to being able to hold 40 gallons, well-developed papillae and containing over a quadrillion (1,000,000,000,000,000) microorganisms.
THE ROLE OF GRAINS AND FORAGES Acetate and butyrate are the main volatile fatty acids (VFAs) produced from ruminal fermentation. Their production is essential to the development of rumen papillae.
Establishing proper rumen development within the first six months of life is crucial; this time frame lays the foundation for how well an animal is able to absorb their nutrients throughout their life, says Klein.
Butyrate or butyric acid is known to stimulate papillae growth. “We’ve found that to get the levels of butyrate needed for papillae growth, a rapidly fermentable feed, such as starter and/or grain must be fed,” says Klein.
Papillae are the finger-like projections inside the rumen that are responsible for absorbing digested nutrients. If a calf has more rumen papillae, it should be able to absorb more nutrients from its diet and therefore have improved growth. If a calf does not have well developed rumen papillae it will not be able to capture all of the nutrients that are made available to it through the diet.
Many calf and heifer raisers rely on forages to aide in rumen development. While helpful in increasing muscular action of the rumen wall, forages alone do not offer the appropriate volatile fatty acid profile to maximize development of the rumen. Acetate results from the fermentation of forage sources and is not as optimal for rumen papillae growth.
Klein encourages calf and heifer raisers to think of calves’ rumens like two rooms with different surfaces. One room’s floor is a smooth surface and another room, is lined with thick carpeting. If a drink is poured onto the floor, the surface covered in thick carpeting is going to absorb and retain more than the smooth surface. “We want our calves’ rumens to act like the thick carpeted floor,” notes Klein to retain as much of the nutrients as possible.
If possible, Klein recommends calf raisers to wait to introduce forages into the diet until calves are 24 weeks of age. Grain should be the focus of the diet through 24 weeks of age, because the rumen is in a prime state of development. The added energy in the diet from the grain will also help achieve additional structural growth.
Because the rumen is not fully developed at birth, neither are the papillae inside the rumen. Growth of the rumen papillae and rumen development is directly correlated with what the calf eats, even in the first few weeks of life. Once you miss this window of opportunity to properly develop the rumen, there is no turning back, Klein adds.1
Developing the right balance between forages in the diet and providing enough grain to meet rumen development demands can be a challenge, and also varies between calf feeding programs. Consult a local Purina Animal Nutrition representative to learn how Purina® Full Potential calf and heifer nutrition innovations can develop healthy calves and heifers into cows with more lifetime profit potential.
1. W.P. Flatt, R.G. Warner, J.K. Loosli. Influence of Purified Materials on the Development of the Ruminant Stomach, Journal of Dairy Science, Volume 41, Issue 11, Pages 1593-1600, Nov. 1958.
Your calves are off to a great start, so don’t stop now, there’s still room to grow.
Research shows the reformulated AMPLI-Calf® Grower feed can further improve weight gains and feed efficiency when compared to the original formula of AMPLI-Calf® Grower feed.1 At 24 weeks, calves fed the new AMPLI-Calf® Grower feed formula can:1,2 Gain even more weight (up to 15 more pounds of gain) Have improved feed efficiency (up to 3% improvement) Have optimal rumen pH and ammonia levels to support improved performance
TO LEARN MORE, CONTACT YOUR LOCAL PURINA ANIMAL NUTRITION DEALER. WWW.AMPLICALF.COM
©2014 Purina Animal Nutrition LLC. All rights reserved. AMPLI-Calf is a registered trademark of Purina Animal Nutrition LLC. Purina, the checkerboard and the Chow brand marks are used by Purina Animal Nutrition LLC., under license only in the United States and its territories (including Puerto Rico).
1 Purina Animal Nutrition Center, 2012. Calves were fed either 8 or 10 lbs/hd/day of the newly formulated AMPLI-Calf® Grower feed or the original AMPLI-Calf® Grower feed from 12 to 24 weeks of age, with ad libitum hay. 2 Guatam, K.K., et al. 2012. ADSA/ASAS.T291.
Dairy Star • Saturday, June 28, 2014 • Page 19
“... we save money ... less labor, more milk.” — Hector Jimenez
R&J DAIRY, DUBLIN, TEXAS 850 cows milking 75 lbs/cow/day SCC: 190 – 210,000 “We have been using Udder Comfort™ for 3 to 4 years. It is our product of choice for hard quarters and for edema in fresh cows and heifers. We put it on 2 or 3 times a day for the first few days after calving,” says Hector Jimenez. Hector and his wife Fabiola and his uncle and aunt Arturo and Sylvia Rodriguez own and operate their 850-cow R & J Dairy, Dublin, Texas. “We have less need for intramammary treatments because overall udder condition is so improved. It really works. In the past, we had SCC between 250 and 300,000,” he explains. “Now it runs 190 to 210,000. “We like the blue spray because the milkers can see it. It takes only a minute or less to do this in the parlor.
“The cows in our hospital pen recover faster with Udder Comfort, so we ship more milk and save more money. “We were surprised. We got a sample and left it sit for a month. Then we thought it doesn’t hurt to try, so we did. Even the milkers saw how well it works. The result is less labor, more milk.”
Quality Udders Make Quality Milk
Keep the milk in the system 1.888.773.7153 1.613.652.9086 uddercomfort.com Call to locate a distributor near you. For external application to the udder only after milking, as an essential component of udder management. Always wash and dry teats thoroughly before milking.
Dairy Star • Saturday, June 28, 2014 • Page 21
FOR
1.9%
72 MONTHS ON USED
8000- 8R & 8RT SERIES TRACTORS
R, 1907 hrs 5 3 3 8 D J 1 201 ,000 109505
, 461 hrs R 0 1 3 8 D J 2012 00 106358
, 306 hrs R 5 8 2 8 D J 2013 00 106298
$235 ,
$243,0
$231,0
Over 1000 items with pictures updated daily • Go to www.midwestmachineryco.com
(1) = GLENCOE 800-558-3759 4561 HWY 212
(2) = HOWARD LAKE 866-875-5093 5845 KEATS AVE. SW
(3) = STEWART 800-827-7933 78412 CO RD 20
(4) = ST. CLOUD 800-645-5531 1035 35TH AVE. NE
(5) = GLENWOOD 888-799-1495 1710 N FRANKLIN
(6) = SAUK CENTRE 888-320-2936 1140 CENTRE ST
(7) = ALEXANDRIA 888-799-1490 5005 STATE HWY 27 E
(8) = PAYNESVILLE 866-784-5535 725 LAKE AVE. S
(9) = PRINCETON 800-570-3453 3708 BAPTIST CHURCH RD
(10) = LITTLE FALLS 800-655-5469 16069 HWY 27 E
(11) = WADENA 888-631-2311 62505 US HWY 10
(12) = AITKIN 800-732-1129 1120 2ND ST NW
(13) = BAXTER 800-568-4338 7045 FOLEY RD
2 2 3 7 6 5 2 1 8 7 1 5 3 7 5 9 8 7 5 1 6 3 8 6 7 8 2 5 6 3 1 1 6 5 6 5 10 8 10 7 7 9 8 11 10 7 6 10
4WD TRACTORS
JD 8560, 5296 hrs, ‘92........................... 52,500 JD 8870, 5346 hrs, ‘94...........................$77,000 JD 9200, 5175 hrs, ‘97...........................$87,500 JD 9220, 4940 hrs, ‘02.........................$136,900 JD 9230, 1043 hrs, ‘10.........................$215,000 JD 9300, 3816 hrs, ‘99.........................$110,000 JD 9330, 721 hrs, ‘11...........................$255,000 JD 9360R, 623 hrs, ‘12.........................$265,000 JD 9400, 5944 hrs, ‘96.........................$109,000 JD 9400T, 7000 hrs, ‘00.........................$97,900 JD 9430, 2050 hrs, ‘11.........................$227,500 JD 9460R, 166 hrs, ‘13.........................$292,000 JD 9460R, 435 hrs, ‘12.........................$315,000 JD 9520T, 4844 hrs, ‘02.......................$141,900 JD 9520T, 3250 hrs, ‘03.......................$158,500 JD 9520, 3866 hrs, ‘03.........................$156,000 JD 9520, 4900 hrs, ‘06.........................$182,000 JD 9530, 2036 hrs, ‘09.........................$215,000 JD 9530T, 1890 hrs, ‘08.......................$245,000 JD 9530T, 1734 hrs, ‘09.......................$259,000 JD 9510R, 849 hrs, ‘12.........................$295,900 JD 9510RT, 470 hrs, ‘12.......................$335,000 JD 9510RT, 332 hrs, ‘13.......................$343,000 JD 9620, 4163 hrs, ‘05.........................$169,000 JD 9620, 2677 hrs, ‘07.........................$178,900 JD 9630, 1450 hrs, ‘11.........................$245,000 JD 9630, 1153 hrs, ‘11.........................$260,000 JD 9630T, 2351 hrs, ‘08.......................$230,000 JD 9560R, 832 hrs, ‘12.........................$305,000 JD 9560R, 1717 hrs, ‘12.......................$277,000 JD 9560R, 561 hrs, ‘12.........................$335,000 JD 9560RT, 1018 hrs, ‘13.....................$335,000 JD 9560RT, 209 hrs, ‘13.......................$375,000 $
ROW CROP TRACTORS
JD 4450, 6641 hrs, ‘83...........................$34,000 JD 4555, 2wd, 4745 hrs, ‘89...................$47,900 JD 4840, 2wd, 8329 hrs, ‘78...................$21,900 JD 6140M, MFWD, 39 hrs, ‘13...............$95,000 JD 6150R, MFWD, 180 hrs, ‘13............$122,000 JD 6170R, MFWD, 160 hrs, ‘12............$139,900 JD 6170R, MFWD, IVT, 203 hrs, ‘13.....$162,900 JD 6190R, MFWD, 171 hrs, ‘12............$136,900 JD 6190R, MFWD, 333 hrs, ‘13............$145,000 JD 6210R, MFWD, 360 hrs, ‘12............$141,000 JD 7130S, MFWD, 5348 hrs, ‘08............$64,900 JD 7410, MFWD, 12000 hrs, ‘96............$45,000 JD 7410, 6230 hrs, ‘97...........................$52,900 JD 7320, MFWD, 5654 hrs, ‘04..............$59,500 JD 7330, MFWD, 1622 hrs, ‘09..............$94,900
7 1 2 8 8 6 3 8 8 1 1 8 6 2 1 4 10 3 9 6 8 5 7 9 3 5 5 5 8 5 3 3 3 6 3 6 5 6 6 6 3 11 1 7 6
JD 7330, MFWD, 330 hrs, ‘12..............$126,900 JD 7430, MFWD, 867 hrs, ‘10..............$114,900 JD 7430, MFWD, w/ldr, 805 hrs, ‘10.....$139,000 JD 7630, MFWD, 3260 hrs, ‘07............$116,900 JD 7800, 2wd, 7891 hrs, ‘93...................$51,900 JD 7730, MFWD, IVT, 1619 hrs, ‘11. . . . .$126,000 JD 7830, MFWD, 830 hrs, ‘10..............$140,000 JD 7830, MFWD, 650 hrs, ‘10..............$142,000 JD 7200R, MFWD, 259 hrs, ‘12............$163,500 JD 7200R, MFWD, 20 hrs, ‘13..............$165,000 JD 7215R, MFWD, IVT, 205 hrs, ‘12.....$165,000 JD 7215R, MFWD, IVT, 136 hrs, ‘13.....$175,000 JD 7930, MFWD, 3469 hrs, ‘08............$143,000 JD 8120, MFWD, 3246 hrs, ‘03............$118,000 JD 8235R, MFWD, IVT, ILS, 209 hrs, ‘13 $210,000 JD 8235R, MFWD, ILS, 145 hrs, ‘13.....$199,000 JD 8245R, 1435 hrs, ‘09.......................$185,000 JD 8245R, 650 hrs, ‘10.........................$195,000 JD 8230, MFWD, 2299 hrs, ‘08............$147,500 JD 8230, MFWD, IVT, 2059 hrs, ‘07. . . . .$158,500 JD 8260R, MFWD, 259 hrs, ‘12............$185,000 JD 8260R, MFWD, 69 hrs, ‘13..............$197,000 JD 8320, 6221 hrs, ‘03.........................$118,900 JD 8270R, MFWD, 1478 hrs, ‘10..........$174,000 JD 9225R, MFWD, 2128 hrs, ‘09..........$157,000 JD 8400T, 8169 hrs, ‘98.........................$59,900 JD 8400T, 3600 hrs, ‘97.........................$73,900 JD 8330, IVT, ILS, 3980 hrs, ‘06...........$154,900 JD 8285R, MFWD, 844 hrs, ‘12............$233,900 JD 8285R, MFWD, 374 hrs, ‘13............$239,000 JD 8420, MFWD, 4700 hrs, ‘04............$144,900 JD 8295RT, 1350 hrs, ‘10.....................$212,000 JD 8430T, 3050 hrs, ‘07.......................$169,000 JD 8430, MFWD, 3828 hrs, ‘09............$186,000 JD 8310R, MFWD, ILS, IVT, 447 hrs, ‘12 $242,000 JD 8310R, MFWD, ILS, IVT, 325 hrs, ‘13 $248,000 JD 8310RT, 131 hrs, ‘13.......................$245,000 JD 8310RT, 385 hrs, ‘13.......................$269,000 JD 8530, 5927 hrs, ‘08.........................$162,000 JD 8335R, MFWD, IVT, ILS, 703 hrs, ‘12 $262,000 JD 8335R, MFWD, IVT, ILS, 365 hrs, ‘13 $270,000 JD 8345R, MFWD, IVT, ILS, 1171 hrs, ‘10. $260,000 JD 8360RT, IVT, 728 hrs, ‘13................$280,000 JD 8360RT, IVT, 625 hrs, ‘12................$277,000 JD 8360RT, IVT, 286 hrs, ‘13................$295,000
5 7 7 5 6
Moore 24R22, 1.6 bu, ‘03.......................$54,900 White 8500-C, 24R22, CCS, ‘12...........$136,900 JD 7300, 12R30, 1.6 bu, ‘92...................$15,500 JD 1710, 12R30, ‘97...............................$20,000 JD 1750, 6R30, 3 bu, ‘08........................$35,500
PLANTERS
8 9 5 4 4 2 8 5 11 4 7 3 8 2 9 4 6 3 8 3 7
JD 1750, 6R30, 3 bu, ‘14........................$37,900 JD 1750, 8R30, 3 bu, ‘12........................$37,500 JD 1780, 24R20, ‘98...............................$38,000 JD 1780, 24R20, ‘97...............................$39,500 JD 1770, 16R30, 3 bu, ‘06......................$69,900 JD 1770, 16R30, CCS, ‘13....................$118,500 JD 1770, 24R30, CCS, ‘09....................$135,900 JD 1790, 16R30/31R15, ‘03...................$69,900 JD 1760, 12R30, 3 bu, ‘13......................$72,000 JD 1760, 12R30, 3 bu, ‘13......................$73,000 JD 1720, 24R22, 3 bu, ‘01......................$47,900 JD 1720, 24R22, ‘05...............................$48,000 JD 1720, 16R30, CCS, ‘13....................$110,900 JD 1770NT, 12R30, 3 bu, ‘11.................$95,000 JD 1770NT, 16R30, CCS/PROS, ‘13.....$132,000 JD 1770NT, 16R30, CCS/PROS, ‘12.....$135,000 JD 1770NT, 24R30, CCS, ‘08................$145,000 JD DB44, 24R22, ‘04..............................$92,500 JD DB44, 24R22, CCS, ‘13....................$205,000 JD DB88, 48R22, CCS, ‘11....................$255,000 JD DB66, 36R22, CCS, ‘11....................$192,900
5 6 3 8 9 8 8 6 4 6 7 9 5 4 1 6 3 2 1 8 6 8 8 8 7 9 5 8
JD 980 FC, 41.6’, 3-bar, ‘95....................$19,500 JD 980 FC, 26’, 3-bar, ‘94.......................$21,000 JD 980 FC, 44.5’, ‘01..............................$22,000 JD 985 FC, 49.6’, 3-bar, ‘95....................$20,900 Sunflower 5035, 28’ FC, ‘05...................$25,000 Case TIgerMate 200, 50.5’, 5-sec, ‘10. . .$59,000 JD 2200 FC, 30.5’, 3-bar, ‘02..................$24,500 JD 2200 FC, 54.5’, 3-bar, ‘03..................$42,900 JD 2210 FC, 20.6’, 3-sec, ‘04..................$24,900 JD 2210 FC, 23.6’, 4-bar, ‘12..................$33,900 JD 2210 FC, 38.5’, 4-bar, ‘09..................$44,500 JD 2210 FC, 41.6’, 3-sec, ‘13..................$59,000 JD 2210 FC, 44.5’, 2-bar, ‘07..................$47,900 JD 2210 FC, 45.6’, 5-sec, ‘13..................$64,000 JD 2210 FC, 46.6’, 5-sec, ‘11..................$76,900 JD 2210 FC, 47.5’, 4-bar, ‘12..................$77,000 JD 2210 FC, 49.5’, 4-bar, ‘05..................$46,000 JD 2210 FC, 51.6’, 5-sec, ‘09..................$62,500 JD 2210 FC, 54.5’, 3-bar, ‘06..................$49,500 JD 2210 FC, 55.6’, 2-bar, ‘09..................$68,000 JD 2210 FC, 55.5’, 5-sec, ‘13..................$89,000 JD 2210 FC, 58’, 4-bar, ‘12.....................$74,900 JD 2210 FC, 60.5’, 4-bar, ‘12..................$83,000 JD 2210 FC, 60.6’, 5-sec, ‘13..................$86,900 JD 726, mulch finisher, 30’ 9”, ‘97..........$32,000 JD 2310, mulch finisher, 33.9’, ‘12.........$67,500 JD 2310, mulch finisher, 39.9’, ‘13.........$94,000 JD 2310, mulch finisher, 45.9’, ‘11.......$104,000
SPRING TILLAGE
(1) = GLENCOE (2) =HOWARD LAKE (3) = STEWART (4) = ST. CLOUD (5) = GLENWOOD (6) = SAUK CENTRE (7) = ALEXANDRIA (8) = PAYNESVILLE (9) = PRINCETON (10) = LITTLE FALLS (11) = WADENA (12) = AITKIN (13) = BAXTER
290 hrs , R 5 3 2 8 D 2013 J ,000 93566
$210 ,0
42 hrs 7 , R 5 8 2 8 2012 JD 7,000 103613
$19 7
332 hrs , R 0 6 2 8 D 2012 J ,500 92035
$191 ,5
29 hrs 8 3 , 0 3 4 8 D 2009 J ,000
$186 ,0
103179
Page 24 • Dairy Star • Saturday, June 28, 2014
Used Patz V950, #2458 - $52,900
Used Patz V620, #2397 - $33,900
Used Patz V615, #2876 - $29,900
Used Patz V500, #2912 - $25,900
Used Patz V420, #2942 - $27,900
Used Patz V350, #2908 - $22,500
Used Supreme Intl. 500, #2757
Used Trioliet Solomix 1-1200 VLH-C, #2139
Used Trioliet Solomix 2-1600 ZK, #2676
Used Trioliet Solomix 2-2000 VLH, #2377
Used Kuhn Knight Vertical Maxx 5127, #1967 - $16,900
$21,900
Used Kuhn Knight Vertical Maxx 5135, #2982 - $17,200
$17,900
Used Kuhn Knight Vertical Maxx 5144, #2851 - $19,900
$32,900
Used Knight Verti-Maxx 5055, #2854 - $19,700
$28,900
Used Kuhn Knight Vertical Maxx 5168, #2615 - $29,500
Used Kuhn Knight Vertical Maxx VT 168, #2431 - $37,500
Used Jaylor 4405, #2996 - $25,900
Used LuckNow 2270, #2678 - $28,900
Used LuckNow 2420, #2583 - $21,900
Used NDE 1552, #2943 - $21,500
Used Roto Mix 524-15B, #2896
Used Gehl 7210, #2829 - $8,900
Used Knight Reel Auggie 2450, #2418
Used Knight Reel Auggie 3030, #2939
Used Knight Reel Auggie 3042, #2884
$21,900
$7,900
$14,900
$11,900
Salesman: Tony Steinhart (608)778-3491 or Joe Ryan (608)778-2900
4116 Hwy. 80 S. Platteville, WI
Office: (608) 348-9401 or Toll Free: 1(888) BUY-PATZ www.steinhartsfarmservice.com
4116 Hwy. 80 S. Platteville, WI
Another year, another forage challenge Page 34 • Dairy Star • Saturday, June 28, 2014
The old idiom “It never rains, but it pours” was not intended to be taken literally, but it sure has been this spring and now in June. The wet conditions this spring delayed or in some cases, prevented dairy producers from planting crops and harvesting the rst cutting of alfalfa. Then the rain came leaving planted crops standing in water, under water or ooded out from swollen rivers and streams. Much of the ood damage has focused on corn and soybeans, but dairy and beef producers are concerned about the loss of forage crops also. The length of time plants are under water and the silt reBy Jim Linn maining in eld and on plants Nutritionist after the water recedes pose several concerns for livestock producers. I hope by the time you read this, elds have dried out and crops are starting to come back, replanted as necessary and/or harvested. The concerns and issues related to the nutrition and feeding of forages from ooded elds does not go away with receding water. The oods and heavy rains have and will have an impact on both the quality and quantity of forage available for this coming year. First cutting quality is lower than desired because of rain delaying harvest and plants maturing. Second cutting likely will be of lower quality as plants mature waiting for elds to dry out. Yields and quality of corn silage are likely to be lowered from late planting, but the remaining summer weather will determine the extent of the decrease. Producers who have tried to buy hay this last month are nding very little is available and if available, a premium price for average quality. This year, like last year, appears to be another challenging forage year for dairy producers. Here are some of the questions being asked regarding this year’s forage challenges: First, if you have crop insurance and/or enrolled or considered enrolling in the Prevented Plant program, be sure to check with a representative from these programs on the coverage and regulations before attempting to harvest and/or replant forage crops. What are the problems associated with ooded forage crops and pastures? Soil contamination of the forages is the major issue. The silt and sediment settling on plants
and in the eld after the water recedes can harbor many types of bacteria and disease causing organisms. Clostridium, E coli and Listeria are some of the organisms found in the silt of ooded elds. These and other organisms can cause abnormal fermentation, produce molds and mycotoxins and increase spoilage of stored forages. Herbicides and pesticides also are likely contaminates on forages where oodwater has originated from runoff of corn and soybean elds. Can ooded pastures be grazed? Yes, but with caution. All of the problems of bacteria and soil borne organisms will be present. Clipping the pasture and waiting for regrowth before grazing is the safest, but not totally safe, approach to grazing ooded pastures. Avoid having livestock consume decaying and dead plant tissue or ingesting soil from grazing to close to the ground. Adequate fresh, regrown forage should be available for animals to graze. Harvesting standing forages after ooding. Evaluate the maturity and quality of the forage before harvesting. The nutrition value of very mature or dead decaying plants is very low and could cause signicant health problems in animals. Ask yourself the tough question: Is this forage worth the cost of harvesting and feeding? The cost in lost production and increased animal health problems from feeding poor quality forage is often much greater than the economic value of the forage. When forage supplies are low, not harvesting and feeding forage is a difcult decision, but sometimes, it is the best decision. Soil borne organisms and contaminates provide a high risk to animal health. If the forge is heavily silted and not worth salvaging, cut and remove the forage from the eld or possibly chop it back onto the eld if the residue is not excessive to smother subsequent cuttings. Harvesting a salvageable hay crop as dry hay is generally a safer option than ensiling or making baleage. Haycrop forages contaminated with silt are at a high risk for poor fermentation and/or clostridia fermentation. Ensiling forages under 35 percent DM creates a greater risk than drier (35 – 40 percent DM) forages for abnormal or poor quality fermentation. Clostridia fermented silages will have a pH over 5 and have a strong distinctly rank odor, primarily of butyric acid. Use a proven inoculant on any forage you ensile and follow good silage making practices. Store silt contaminated forages separate from other forages. You will want easier disposal of it if the quality is very low. In addition, you will want to know how much of the contaminated forage is being fed and to what animals. Is there a way to check for the extent of silt con-
tamination before harvesting? The amount of soil or silt contamination will depend upon the duration and degree of oodwater coverage. Visual evaluation will likely provide a good estimate, but quantitatively, a total ash test, or possibly an individual mineral test such as phosphorus, can help estimate silt accumulation on plants. Dairyland Laboratories lists an average total ash content of about 11 percent (DM basis) for legume haylage with a normal range from 7 to 15 percent. For phosphorus content of legume haylage, the average is 0.36 percent (DM basis) with a range from 0.30 percent to 0.44 percent. Fresh standing plants with an ash or phosphorus content at or exceeding the high range value would indicate a high level of silt contamination. Harvesting can also increase the silt contamination of forages. Cut ooded forages higher than normal to avoid scrapping the ground and try to minimize picking up soil when raking, baling or chopping the forages. What are the forage options for replanting? The answer to this question depends on insurance and Prevented Plant participation. Check with representatives from these programs along with your agronomist to determine what forage crop is an option for planting. The late plant date and when the forage should be versus can be harvested are factors to consider. From a pure dairy nutrition perspective, a BMR forage sorghum is now a good option for ensiling and replacing corn silage. It tolerates heat and drought better than other forage sources and yield is generally good. The BMR gene increases digestibility over conventional sorghum resulting in a quality comparable to average corn silage. An early maturing corn hybrid for silage is a possibility for forage, but grain content will be low. Sorghum sudangrass cross hybrids might be considered for replacing alfalfa, but quality is very dependent on harvest date and frequency. Quality of any forage planted now and not harvested until November will be low and not meet milk cow standards. Flooded and water soaked forages are this year’s challenge to harvesting ample quantities of high quality forages for dairy cows. Soil contamination and the soil borne bacterial spores it contains pose signicant health risks to animals consuming ood damaged forage. The key to limiting health problems from feeding ooded forages is to follow good forage harvesting practices, especially emphasizing correct moisture level, chop length and packing in silos. Bacterial inoculants that promote good fermentation generating a low pH with high lactate content should be used. Some options exist for good quality and yield of late planted forages, but harvesting before November will be required.
Dairy Star • Saturday, June 28, 2014 • Page 39
Continued from OLD COUNTRY| Page 38
Xcalibur 90LX Parallel
PERFECT FOR RETROFITS AND NEW PARLORS Triple “O” Dairy, Randolph, MN Upgraded their old parlor stall to a new Boumatic Xcalibur 90LX Lift Exit Stall. “The cows enter the parlor so much easier,” said Kerry Otte. “We can tell the cows are so much more comfortable in the parlor.”
RON JOHNSON/ DAIRY STAR
Workers ip the loaves of cheese so all sides are exposed to the salt brine. About 90 percent of the milk the Amish send to K&K Cheese is made into Muenster. maple syrup and canned garden produce, like pickled asparagus and corn salsa. Been looking for a bonnet like the Amish ladies wear? The store has both blue and black ones. Everhart said he is going to start carrying Amish-style hats again.
“It’s about watching e Am the Amish wa way of life d going back 100 and years in time.”
– KELLY EVERHART
People who can’t make the trip out to southwest Wisconsin’s Amish country can get cheese sent to them. For more information about that process, or about ordering gift boxes of cheese and other delectables, telephone 608-654-5411. The toll-free number is 888-320-9469.
The web address is: www.oldcountrycheese.com/. The cheese store gets most of its trafc on summer weekends. Everhart said Memorial Day weekend brought in 300 shoppers that Saturday. Autumn, with its fall color tours, draws people, too. A popular trip includes the cranberry festival at Warrens, Wis., and goes south to the Amish area at Cashton, and on to the apple festival at Gays Mills. Everhart enjoys hearing customers’ reactions to seeing the horse drawn buggies and farm machinery; women in long dresses working in gardens; and men going about their farm work while wearing dark pants, long-sleeved shirts, suspenders, and straw hats. “It brings back memories,” Everhart said. “That’s what’s nice about being out here. It’s not just about getting good cheese. It’s about watching the Amish way of life and going back 100 years in time.”
A bold new standard in parallel stalls, offering superior design, cow comfort and efficiency. · Designed for quick installation by providing modularized components to the dairy site for fast, efficient assembly. · Robust, virtually indestructible · Easy to install, low maintenance · For new parlors or retrofits
· Faster on-site construction · Cow-friendly entrance and exiting · Standard or flexible cow spacing · Patented shoulder bumpers for cow comfort · Design allows for easy parlor cleanup
The Xcalibur 90LX™ is versatile, flexible and designed to fit. orr
Call Dairyland today to discover the benefits for your cows with the Boumatic Xcalibur 90LX stall front upgrade.
Ask us about the new AMI 5450 Detacher!
Dairyland Services, LLC
Dairyland Equipment Services, Inc. Plainview, MN
Montgomery, MN
Woodville, WI
800-548-2540
866-467-4717
Is putting up good hay difÀcult?
Wrap it.
SAUK CENTRE, MN
www.midwestmachineryco.com
Phone 320-352-6511 Toll Free 1-800-549-5875
• Simple mechanical fully automatic system • Power driven with traction tire • Adjustable hydraulic bale compaction system • Hydraulic tail gate • Hydraulic jack for easy start • Plastic Àlm watch - 4 stretchers • Use 40% less plastic compared to individual bale wrappers • Round bale (up to 5’x5-1/2’) • Square bale (up to 5-1/2’ long)
Experience the Anderson advantage giving us a call!
MID-CENTRAL EQUIPMENT
Hwy. 210 West • Henning, MN • (218) 583-2931 or (218) 583-4124 www.midcentralequipment.com
F U L L Y LO A D E D GEHL COMPACT EQUIPMENT TAKES ON THE TOUGHEST JOBS
R SERIES SKID LOADERS
9 9 9 9
Capacities from 1,900 to 2,780 lbs. Choice of 4 Control Patterns Integrated Digital Display Increased Auxiliary Hydraulics
VERTICAL-LIFT SKID LOADERS
9 9 9 9
Capacities from 2,700 to 4,000 lbs. C Lift Heights up to 12 Feet C Choice of 4 Control Patterns C Cab-Forward Design
Gehl 4640E, 2-speed, cab, heat, 150 hrs., 68 hp new 70” bucket, counter weight ............... $31,000 Gehl 5240E, 1,000 hrs., counter weight, 68 hp, side windows, heater .............................. $26,500 Gehl 4635SX, 1025 hrs., counter weight, clean machine ................................................... $16,900 Gehl 5640E, side windows, heat, 2-speed, new tires, 4628 hrs., 71 hp ................................ $18,200
RT SERIES TRACK LOADERS
9 9 9
I Industry-Exclusive IdealTrax™ A Automatic Track Tensioning System H High Torque and Breakout Forces D Dedicated, Welded Chassis Easy Servicing
MID-CENTRAL EQUIPMENT Hwy. 210 West • Henning, MN
(218) 583-2931 or (218) 583-4124 www.midcentralequipment.com
SELF PROPELLED FORAGE HARVESTERS JD 7950, RWA, 2012, Pro Drive, 250 hrs............................................. Call JD 7800, RWA, 2006, 1817 hrs.$209,000 JD 7780, RWA, 2013, Pro Drive, 200 hrs................................. Coming In JD 7580, RWA, 2013, Pro Drive, 330 hours.................................$359,000 JD 7580, RWA, 2013, 157 hrs ..$359,000 JD 7550, RWA, 2008, Pro Drive, 1850 hrs...................................$249,000 JD 7550, RWA, 2008, 1150 hrs.$258,000 JD 7550, RWA, 2008, 1160 hrs.$248,000
JD 7450, RWA, 2012, Pro Drive, 500 hrs.....................................$299,000 JD 7280. RWA. 2013. Demo Unit ... Call JD 7250, RWA, 2012, 334 hrs. .$229,000 JD 7180, RWA, 2013, 202 hrs. .$248,500 JD 6750, RWA, 2000, 2673 hrs.$105,000 JD 6750, RWA, 2000, 2698 hrs.$105,000 JD 6810, RWA, 2851 hrs. ...........$78,000 JD 6810, RWA, 1994, 4129 hrs. .$59,000 JD 6810, 2WD, 2760 hrs. ...........$39,500 New Holland 365W hay head ...$12,500 All hours are cutter hours
1.9% Financing For 72 Months On select used equipment. Subject to pre-approval by John Deere Financial. Offer ends July 15, 2014. Some restrictions apply.
Page 40 • Dairy Star • Saturday, June 28, 2014
CLOSER CUTTING, FASTER DRYDOWN. The Discbine® 313 and Discbine® 316 center-pivot disc mower-conditioners feature cleaner cutting, more efficient crop flow, and smoother, more effective conditioning. The SMART design includes the new MowMax™ cutterbar and the WideDry™ conditioning system. Larger discs with heavier gears, bearings, and interconnecting shafts increase durability. While the conditioning module is 125 inches wide for consistent dry down, maximizing hay quality. • Larger discs cut closer with less cutterbar tilt • ShockPRO™ disc drive hubs absorb impact before damage can occur
HIGHER CAPACITY. HIGHER DENSITY. Get more out of every hay season with the 5’x6’ round baler delivering greater capacity, durability and bale density—the NEW Roll-Belt™ 560 round baler from New Holland. With new pickups and belt choices and better windrow feeding, the restyled Roll-Belt™ 560 is built New Holland SMART and is set to continue New Holland’s legacy in round baling.
20% INCREASE* IN:
• Exclusive 3-year MowMax™ II cutterbar warranty protection • Widedry™ conditioning systems are 22% wider than previous models • Your choice of chevron rubber rolls, chevron steel rolls or LeaningEdge™ flails
• PICKUP CAPACITY • BELT STRENGTH • BELT DRIVE FORCE • BALING CAPACITY * Compared to the BR7090
PRECISE
FROM THE FACTORY
Speedrower® self-propelled windrowers now feature integrated IntelliSteer™ Auto Guidance that is installed and tested at the New Holland plant in Grand Island, Nebraska. Both the steering and guidance systems are controlled hydraulically so there’s no delay in response. Best of all, one screen controls the windrower functions as well as Auto Guidance.
With Factory Guidance Capabilities!
• Reduce overlaps and skips with cutting accuracies from +/- 1 inch to 8 inches (25.4 to 203.2 millimeters) • IntelliView™ IV 10 inch (254 millimeter) color touchscreen display for complete control • Auto Guidance components common with other New Holland tractors and equipment © 2014 CNH Industrial America LLC. All rights reserved. New Holland is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affi liates.
Stop By One Of These New Holland Dealers For Details... A & C FARM SERVICE INC.
FRANZEN SALES & SERVICE
MODERN FARM EQUIPMENT
TIMMER IMPLEMENT INC. PEASE, MN
VERMILLION, MN
TRUEMAN-WELTERS INC.
www.newholland
PAYNESVILLE, MN
FORT ATKINSON, IA
SAUK CENTRE & PIERZ, MN
ADKINS EQUIPMENT INC.
MELROSE IMPLEMENT INC.
SCHLAUDERAFF IMPLEMENT
DETROIT LAKES, MN
MELROSE, MN
LITCHFIELD, MN
BUFFALO, MN
WERNER IMPLEMENT
.com