Make good decision by buying used insulation blowerscoolmachines.com In any insulation installation process, one needs insulation blower. It may be old or a new one. New may turn the project costlier and used insulation blowers will reduce the overall cost of the insulation. When a person buys a new machine, they are assured about its quality and performance. In case of old and used insulation machines, many aspects need t be checked before buying one. What to check before buying Here are some aspects that need to be verified before buying used insulation blowing machines. Inspection of Electrical Components is must •
Cords and switches checking: Before buying any used insulation machine, the buyer should inspect the power cords which may be exposed wires. In case there are any signs of burning or melting near the main control box, it should be checked and corrected.
•
Perform a power check: Unless a start test is done, it should never be purchased. In case it is a remote-control switch, one must ensure it starts and stops the blower and agitator reliably.
•
Motor & Wiring Condition: Any fault in the blower can be tested with Insulation Resistance Tester which reduces the chances of any future faults. Mechanical Wear
•
Inspect the airlock and agitator: Airlock seals and agitator should be checked for any possible damage. This can be done by removing the top hopper screen and visually verifying.
•
Any jams: This can be checked by starting the agitator. If the motor stops and stutters, there may be airlock jammed or require new seals.
•
Check airflow: This can be checked by connecting a standard 50-foot or 100-foot hose. If the blower blows strong and consistent air pressure at the end, it is working proper.
•
Feed test: In such test, insulation material will be put into the hopper. If the used insulation blowing machine for sale processes the insulation smoothly, conditioning it into a light, fluffy texture, then it is in good condition.