Issuu

$3.00

Published Nationally ®

Western Edition

June 18 2011 Vol. VII • No. 13

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

Sunderland Facility Expands, Construction Streamlines Operation Spending Up During April

Road Machinery Expands Sales Group in Phoenix...10

Miller Machinery Benefits From Metso HP4...11

A Cat 966H wheel loader helps in the processing of aggregate at the newly expanded Sunderland Recycling Facility.

By Erik Pisor CEG CORRESPONDENT

WC A Holds A uction in Perris, C alif. ...40

Table of Contents ............4 Crushing, Screening & Recycling Section ....11-17 Business Calendar ........26 Attachments Section27-29 Truck & Trailer Section .... ..................................31-34 Auction Section ......37-43 Advertisers Index ..........42

Considered a leader in sustainability amongst major U.S. cities, Portland, Ore., has developed cost-effect methods to recycle haul-back materials — generated from street maintenance operations — and reuse them for daily repair work conducted by the city’s

maintenance department. Portland’s haul-back material recycling program is conducted at its Sunderland Recycling Facility, where 30,000 to 50,000 cu. yds. (22,937 to 38,228 cu m) of concrete and asphalt-laden materials are processed annually, according to the Portland Bureau of Transportation. see EXPANSION page 10

Cat CFO: U.S. Economy Not Far From Liftoff BLOOMINGTON, Ill. (AP) Caterpillar Inc. believes the American economy isn’t far from taking off again but needs a better idea of where government policy is headed in key areas such as taxes, Chief Financial Officer Edward Rapp said May 19. The company forecasts that the U.S. economy will grow by about 3 percent in 2012,

Rapp said before a speech at Illinois Wesleyan University in Bloomington. He said growth of 3.5 percent to 4 percent should kick off demand for new heavy machinery like the company’s construction equipment. “There’s a pent-up demand waiting to happen, but it’s going to take more robust growth see ECONOMY page 30

Construction spending inched up for the second straight month in April, 0.4 percent — following downward revisions to the March spending figures — due to increases in private nonresidential and home-improvement spending, the Associated General Contractors of America reported June 1 in an analysis of new Census Bureau data. Association officials noted, however, that the gains were tempered by sluggish homebuilding and declining levels of public investment in construction. “Overall economic conditions seem better than they have been for several years, which normally leads to well-rounded construction growth,” said Ken Simonson, the association’s chief economist. “But these figures may be deceptively positive, masking weakening public sector demand and still-weak demand for residential construction.” Simonson noted that the April results were boosted by a modest half-percent rise in private nonresidential construction and a deceptively large 3.1 percent leap in private residential spending. However, the residential growth was attributable to a 7.6 percent jump in the “improvements” category, a number the Census Bureau frequently revises down in later months, as it did in March. The economist cautioned that the figures from more reliable residential categories — new single- and multi-family construction —declined by 1.0 percent and 0.1 percent, respectively. Simonson noted that private nonresidential spending also was uneven. The largest category, power construction, grew 3.2 percent, and there were increases of 4.7 percent for communication construction and 0.8 percent for private health care construction. But there were decreases of 1.3 percent in commercial construction (retail, warehouse and farm), 1.0 percent in manufacturing consee SPENDING page 10

Page 2 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Made in the USA

SAVE TIME SAVE LABOR

SAVE MONEY SAVE OIL

The FlangeLock Tool allows for the simple sealing of open SAE Code 61, 62 & 62 KAT-Style hydraulic flanges without tools. Constructed out of lightweight high tensile strength T2200 anodized aluminum. Easy on, easy off. Offers a leakproof solution to hydraulic system and environmental cleanliness. • No Tools Required • No Expensive Hardware Needed • No more Rags stuffed into hoses • No more messy Plastic Caps • The Ultimate Contamination Control Tool

• One hand Installation • Eliminate Hydraulic Oil Spills & Clean up • Quick Installation & Ease of Usage • Industry Acclaimed • 100% Made in USA • Safe for Personnel & Environment

For more information contact Mike Pearl

914.980.8890 email: mike@flangelock.com www.flangelock.com

SEAL SAVER PROTECTIVE CYLINDER COVER Stop the never ending cycle of cylinder repairs and avoid costly equipment downtime with the SEAL SAVER protective cylinder cover. Resistant to heat, oil, chemicals and water, the SEAL SAVER protects seals and cylinder rods from premature failure extending the life of your equipment by preventing the ingression of contaminants into the hydraulic system. This unique preventative maintenance tool attaches easily and securely to the rod and cylinder head—usually in fifteen minutes or less—with no disassembly of the cylinder required.

The SEAL SAVER* WILL: Eliminate rod scoring • Extend the life of cylinder seals • Protect cylinders from the elements • Prevent pitting due to chemical washes • Reduce particle contamination of hydraulic systems • Minimize dings and dents associated with falling debris *Patented

SEAL SAVER has proven effective in Recycling, Construction, Mining, Rock Quarries, Waste Management, Refineries and Wood Products industries.

Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 • Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

www.sealsaver.com

Visit for more information or contact us at 1-800-683-5189

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 3

"In Business for over 29 Years" www.hendrixmachineryllc.com 2005 John Deere 550J LT, Stk# 7060, OROPS, 6 way blade, 462 hrs., 80% U/C, 8'6" Wide$36,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2007 John Deere 200C, Stk# 7378, EROPS, A/C, Español 3136 Hrs, 70% U/C, 42” Bkt, Bkt w/24” Thumb, 32” Pads, 10’6” Wide.............................$89,500

2008 Case CX31B, Stk# 7361, OROPS, 637 2005 John Deere 210LE, Stk# 7330, OROPS, Hrs, 70% U/C, Aux. Hyd. 24” Bkt, 12” Tracks, 4WD, 3013 Hrs, 80% Tires, 7’5” Hyd. Box Blade 61” Blade, 3 Cyl. YanMar Eng. ..............$22,500 & Scarifier .............................................$21,500

1996 Cat D5H LGP, Stk# 7277, OROPS, Rear Screen, 6 Way Blade, 80% U/C, 5,370 hrs., Carco Winch, 34" Pyramids Pads, 13' 4" Blade....$34,500

2005 Boxer Compact Track, Stk# 7186, 605 Hrs., 44” Bucket, 9” Rubber Tracks, Aux. Hyd, Perkins Diesel Eng. ...............................$14,500

2005 Cat D4G LGP, Stk# 7362, OROPS, 50% U/C, 6-Way Blade, 2252 Hrs, 25” Pads, 10’2” Blade .....................................................$38,500

2008 Wacker 50KVA, Stk# 7273, 1246 Hrs, 50Va Trailer Mounted, Diesel Eng ..........$16,500

Ranch House Camp, Stk# 6361, New 8x24 Portable Camp House, 4 Bunk Beds, Restroom w/Shower, Sink, Camper Plug in for Electricity 2005 Bobcat T250, Stk# 7353, OROPS, 3087 or Generator Outlet................................$11,500 Hrs, 80% U/C, Aux. Hyd, 68” Bkt, 18” Rubber with Trailer ............................................$17,500 Tracks, 79” Wide, 4 Cyl. Kubota Eng.....$18,500

2003 John Deere 670CH, Stk# 7212, EROPS, 4,270 Hrs., 12 ft Blade ..........................$89,500

1999 Cat 330BL, Stk# 7263, EROPS, A/C, 8469 Hrs, 80% U/C, 34” Bkt, 34” Pads, 11’3” Wide .... ...............................................................$69,500

2002 LinkBelt 290LX, Stk# 7299, EROPS, A/C, 8952 Hrs, 70% U/C, 46” Bkt, 32” Pads, 11’2” Wide, 6 Cyl. Isuzu Eng ...........................$59,500

2008 John Deere 310J, Stk# 7180, OROPS, 2000 John Deere 450H LT, Stk# 7374, OROPS, 4WD, 998 hrs., 50% Tires, 24" Bucket, 2 Stick Sweeps, 6-Way Blade, 4033 Hrs, 60% U/C, 16” Control, No Aux.....................................$46,500 Pads, 8’ .................................................$25,500

2004 Bobcat 430G, Stk# 6486, OROPS, 2512 Hrs, Push Blade, 22” Bkt, Rubber Tracks ........... ..............................................................$18,500

2001 Cat D6R LGP, Stk# 7289, EROPS, A/C, Sweeps, Rear Screen, Eng. Encl., St/Tilt Blade, 70% U/C, 11,862 hrs, Carco Winch, 36" Pads, 13’ Blade ...............................................$89,500

1987 John Deere 770BH, Stk# 7312, EROPS, A/C, 7632 Hrs, 14’ M/B w/Slide & Tip Control, 2006 Cat AM312 Mulching Head, Stk# 7257, 14R x 24 Tires 3 @ 30% & 3 @ 70%, Rear 300 Hrs, 48” Cut, 2237 Hrs.....................$9,500 Ripper ...................................................$32,500

2001 Cat D6R XL, Stk# 7159, EROPS, A/C, Rear Screen, St/Tilt Blade, 70% U/C, 16,853 Hrs., Carco 70 Winch, 30” Pads, 11’8” ft. Blade......... 2000 JLG 600S, Stk# 7308, 60’, 4WD, 1477 ..............................................................$89,500 Hrs, Certify Rebuilt 2006, Diesel ...........$18,500

2007 KDE 5700T, Stk# 7827, 120 240 Volt Single Phase ...........................................$1,000

2006 Kobelco SK330LC, Stk# 7338, EROPS, 2001 Kobelco SK250LC, Stk# 7333, EROPS, A/C, 6336 Hrs, 90% U/C, 36” Bkt w/Thumb, 32” A/C, 5043 Hrs, 90% U/C, 60” Bkt, 32” Pads, Pads, 11’2” Wide ..................................$46,500 11’2” Wide ............................................$82,500

2006 Cat D6N XL, Stk# 7370, EROPS, A/C, 6Way Blade, 70% U/C, 7094 Hrs, 3rd Valve, Aux. Hyd, Rear Draw Bar, 24” Pads, 10’7” Blade........ ..............................................................$89,500

2007 Cat D6N LGP, Stk# 7384, EROPS, A/C, Stereo, Sweeps, Rear Screens, 6-Way Blade, 2360 Hrs, 80% U/C, Cat TA55 Winch w/Fair Leads #0602579, 34” Pads, 13’4” Blade .........$169,500

2005 Ditch Witch RT40, Stk# 7208, 953 Hrs, 50% Tires, 64” Blade, Sliding Boom, 3 Cyl. Deutz Eng. .............................................$11,500

2002 JLG G6-42A, Stk# 7358, 6000 Lbs, 42’, 4WD, 4WS, 5040 Hrs, 80% Foam Filled Tires, 4’ Forks .....................................................$21,500

2002 LinkBelt 290LX, Stk# 7299, EROPS, A/C, 8952 Hrs, 70% U/C, 46” Bkt, 32” Pads, 11’2” Wide, 6 Cyl. Isuzu Eng ..........................$59,500

2005 Bobcat 325, Stk# 6843, OROPS, 1,644 2005 John Deere 450J LGP, Stk# 7336, OROPS, 2006 New Holland L170, Stk# 7270, OROPS, Sweeps, Rear & Sides Screens, 6-Way Blade, 90% 934 hrs., 70% Tires, RollCage, Aux. Hyd., Mech. hrs., 90° Boom, 80% U/C, 13" Bucket, Aux. Hyd., U/C, 4566 Hrs, 24” Pads, 9’7” Wide ........$34,500 QC, 66" GP Bkt, 4 Cyl. NH Eng..............$17,500 w/Blade .................................................$16,500

2006 Komatsu D39PX, Stk# 7147, OROPS, Screens, Sweeps, 6 Way Blade, 2,095 hrs., 25" Pads, 9' 9" Blade ..................................$36,500

2005 John Deere 450J LT, Stk# 7341, OROPS, 80% U/C, 6-Way Blade, 2835 Hrs, 16” Pads, 8’ Blade .....................................................$32,500

2003 Cat D6R II XL, Stk# 7290, EROPS, A/C, Sweeps & Rear Screen, St/Tilt Blade, 11,627 1996 Cat 140H, Stk# 7279, EROPS, A/C, Low Pro 2005 John Deere 450J LT, Stk# 7051, OROPS, 6 Way Blade, 1,950 hrs, 80% U/C, 16” Pads ........ hrs., 80% U/C, Carco 70APS Winch, 24" Pads, Cab, 70% Tires, 70% Tires, 14 ft. M/B w/Slide & 10'7" Blade ..........................................$112,500 Tip Cntrl, Rear Ripper, Pushblock ..........$105,000 ..............................................................$36,500

Page 4 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION Circulated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…

ROAD MACHINERY EXPANDS SALES GROUP IN PHOENIX AREA

Road Machinery is the authorized dealership of Komatsu, in the states of Arizona, Southern California and New Mexico.

METSO’S HP4 PROVES ITS VALUE IN MULTIPLE APPLICATIONS

As a Metso distributor based in Longview, Wash., Miller Machinery covers large areas of the Pacific Northwest, and the demands on its machinery vary considerably.

ATTACHMENTS TRANSFORM OFF-THE-SHELF MACHINE INTO PRODUCER

To Bruce Howard’s team, the machine with its customized suite of Geith attachments is part dream come true and part Swiss Army Knife.

30 11

MAJOR WIRE NAMES WESTATE MACHINERY NEW SCREEN MEDIA DEALER IN NORTHWEST

Westate has worked directly with aggregate and mining customers for more than 60 years, providing screen media and other crushing, screening and replacement part solutions.

CAT 775G OFF-ROAD TRUCK MEETS TOUGH EMISSIONS STANDARDS

To meet Tier IV final emissions regulations in the United States, the Cat C27 ACERT engine includes the Cat NOx reduction system and diesel oxidation catalyst.

DEVELOPERS PITCH ARENA COMPLEX PLANS TO NEVADA LAWMAKERS

Three plans are in play for Las Vegas and the ultimate decision on which one to back would be up to local jurisdictions.

Edwin M. McKeon Sr. Hal Ewing Edwin M. McKeon Jr. Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 Toll Free Fax Web site Editorial e-mail Advertising e-mail

215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com

editorial@cegltd.com production@cegltd.com

For advertising rates: Contact Edwin M. McKeon Jr. National Sales Manager 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com Contact Dale Agnew • Arizona • Colorado • New Mexico • Oklahoma • Texas • Wyoming

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com Contact Frank Strazzulla • Alaska • California • Hawaii • Nevada • Oregon • Utah • Washington

949/459-1767 Fax 949/203-2859 e-mail fstrazzulla@cegltd.com Contact Patrick Kiel • Idaho • Montana

PUBLIC SALE BRINGS IN BIG NUMBERS FOR WCA IN PERRIS, CALIFORNIA

Highlights of the sale included a 2002 Caterpillar 966G Series II wheel loader that sold for $90,000, a 2005 Case 621D wheel loader that brought in $52,500 and a 1999 Kawasaki 80Z IV-2 wheel loader that was won with a bid of $45,000.

Founder, Publisher & CEO Vice President Emeritus Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

26 BUSINESS CALENDAR 35 CLASSIFIEDS 38 COMING AUCTIONS

EQUIPMENT… 30 LIUGONG 842IV Z-Bar Wheel Loader

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com Construction Equipment Guide Western Edition (ISSN 306-484) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/5232200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2010, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 5

1997 Cat 950F Wheel Loader ....$77,500 1996 Cat D4H LGP Dozer ........$39,500 1996 Cat D6H Dozer ..............$69,500 2001 Cat D6R LGP Dozer ........$67,500

1999 Cat 330BL Excavator ........$87,500 1993 Cat 963 Crawler Loader ....$37,500 1996 Cat 12H Motor Grader ......$87,500 1982 Cat 140G Motor Grader ....$74,500

2001 Cat 416C Loader Backhoe..$27,500 2001 Cat 420D 4x4 Ldr. Backhoe......$37,500 2002 Case 580SM 4x4 Ldr. Bakchoe $32,500 (2) Case 70XT Skid Steer ....$12,500 Ea.

(2) 1995 Cat 980F Wheel Ldrs ....$85,500 Ea. 1993 Cat EL240C Excavator ......$44,500 1996 Cat 322L Excavator ........$59,500 2001 Cat IT28G Wheel Loader ..$52,500

2001 Leeboy 1000C Paver ........$18,500 Raygo Gator ........................$17,500 Bomag BW142PD Compactor ....$18,500 1993 Hamm 2210 Compactor ..........$19,500

Page 6 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bayonetbreaker.com View at: YouTube/Bayonet Breaker

Covered By One or More of the Following US Patents: US 6,430,849 B1 US 6,751,896 B2 US 7,117,618 B2 US 7,257,910 B2

3T Choos o e From !

GO FROM EXCAVATING TO HAMMERING IN 3 SECONDS. FITS MOST MODELS OF BACKHOES AND EXCAVATORS

Certified Master Distributor for Bayonet Products

CALL DOUG OR DAVE (866) 485-7180 WWW.RBUSED.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 7

International 350 Payhauler, 1:25 Scale ........ Grove GMK4115L Truck Crane, 1:50 Scale .... ..................................................................$260 ................................................................$225 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ............$70 Allis-Chalmers HD-41 Dozer, 1:25 Scale......................$185 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$65 Bantam C-35 Crawler Shovel, 1:50 Scale ......................$65 Bantam Truck Mounted Shovel or Backhoe; 1:50 Scale .... ..........................................................................................$90 Bobcat A300 Wheel Loader, 1:25 Scale ........................$25 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader ..............................................................................$40 Bobcat M-743 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat S175 Skid Steer Loader, 1:50 Scale..................$20 Bobcat S175 Skid Steer Loader, 1:25 Scale..................$40 Bobcat S185 Skid Steer Loader, 1:25 Scale ..................$30 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale..................................................................$60 Bobcat 325 Mini-Excavator, 1:25 Scale ........................$30 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$30 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$35 Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$85 Caterpillar 4-Piece Earthmover Set, 1:64 Scale ............$85 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$65 Caterpillar AP655D Paver, 1:50 Scale ............................$65 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ..........................................................................................$50 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ......$45 Caterpillar D6T XW Track-Type Tractor ........................$65 Caterpillar D8R Track Type Tractor, 1:50 Scale ............$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ..........$85 Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$75 Caterpillar D11T Track Type Tractor, 1:50 Scale ..........$85 Caterpillar 24H Motor Grader, 1:50 Scale ......................$90 Caterpillar 140M Motor Grader, 1:50 Scale....................$70 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale .. ..........................................................................................$35 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ......$30 Caterpillar 297C Multi-Terrain Loader, 1:32 Scale ........$35

John Deere 850K Dozer, 1:50 Scale ........$45

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ................$35 Caterpillar 323D L Excavator, 1:50 Scale ......................$50 Caterpillar 320D Excavator, 1:50 Scale..........................$65 Caterpillar 365B Excavator, 1:50 Scale..........................$65 Caterpillar 385C Excavator, 1:50 Scale..........................$60 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .... ..........................................................................................$45 Caterpillar 511OB Excavator, 1:50 Scale ......................$98 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $35 Caterpillar 725D Articulated Truck, 1:50 Scale ............$60 Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$70 Caterpillar 785D Mining Truck, 1:50 Scale ..................$140 Caterpillar 836G Landfill Compactor, 1:50 Scale..........$50 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $40 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$45 Caterpillar 963D Track Loader, 1:50 Scale ....................$55 Caterpillar 966A Wheel Loader, 1:50 Scale ..................$45 Caterpillar 977 Traxcavator, 1:50 Scale ........................$35 Caterpillar 988H Wheel Loader, 1:64 Scale ..................$30 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$70 Dynapac CC232 Vibratory Compactor, 1:35 Scale ......$45 Dynapac F 181 CS Paver, 1:35 Scale ............................$80 Gradall XL4300II Excavator, 1:32 Scale ........................$75 Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$30 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$50 International TD-15 Dozer, 1:87 Scale............................$40

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Caterpillar 374D Excavator, 1:50 Scale.......... ................................................................$110

International TD-24 Ag/Crawler, 1:50 Scale ..................$40 International TD-24 Military Dozer, 1:50 Scale ..............$45 International TD-25 Dozer, 1:87 Scale............................$40 JCB 3CX Backhoe Loader, 1:50 Scale ..........................$45 JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$65 John Deere 200D LC Excavator, 1:50 Scale ..................$40 John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........$35 John Deere 400D Articulated Truck, 1:50 Scale ..........$40 John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 624K Military Wheel Loader, 1:50 Scale....$30 John Deere 748H Log Skidder, 1:50 Scale ....................$45 John Deere 850J Crawler Dozer, 1:50 Scale ................$40 Komatsu 960E Mining Truck, 1:50 Scale ....................$250 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$60 Komatsu D51 EX Dozer, 1:50 Scale ..............................$60 Komatsu D51 PX Dozer, 1:50 Scale ..............................$60 Komatsu D375 Dozer, 1:50 Scale ..................................$85 Komatsu GD655 Motor Grader, 1:50 Scale....................$60 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$70 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ................................................................................$75 Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$225 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40 LBX 210 X2 Excavator, 1:40 Scale ................................$70 Link-Belt 3200 All Terrain Crane, 1:50 Scale ..............$180 Link-Belt 80100 Rough Terrain Crane, 1:50 Scale ......$160 LeTourneau Super C Scraper w/Cab, 1:50 Scale..........$80 LeTourneau Military Super C Scraper, 1:50 Scale ........$50 Northwest 25-D Backhoe, 1:50 Scale ............................$90 Terex PPM AC40/2L ATC, 1:50 Scale............................$175 Terex Demag AC100/4 ATC, 1:50 Scale........................$180 Terex TR60 Off-Highway Truck, 1:50 Scale ................$170 Terex 860sx Backhoe Loader, 1:50 Scale ....................$110 Vogele Super 700 Small Paver, 1:50 Scale....................$70 Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$150 Volvo A25D Articulated Truck, 1:50 Scale ....................$75 Volvo SD-122 Soil Compactor, 1:72 Scale ....................$40 Volvo BL71 Backhoe Loader, 1:50 Scale ......................$45 Volvo L90E Wheel Loader, 1:50 Scale ..........................$70

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 8 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Screen Soils

Pipeline Padding

Mix Compost

ALLU D-SERIES MODELS Screener Crushers & Fine Screening

scan for video

• Over 70 models available to fit EVERY machine • High production even with wet muddy materials • 5/8” & 1” Screening size with replaceable hammers • Stronger outer shell for longer wear and less maintenance ALLU Group Inc. Info Call: 1-800-939-2558 | Email: usa@allu.net

Our Rock Crushers and Soil Stabilizers series can be used to scarify any material without ripping; such as gravel roads and asphalt roads. It can be operated with a standard agricultural tractor equipped with 4WD and creeper gear or a variable transmission starting from 80 HP to 360 HP.

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ June 18, 2011 â€˘ Page 9

ÂŠÂ•Â•Čą Â˜ÂžÂ?ČąČŚČą ÂŠÂ&#x;ÂŽÇąČąČą

2001 Komatsu PC138US-2, #80854, Blade, Aux Hyd, 8â€™ Arm, 4700 Hrs ..................$69,500

2006 Komatsu PC270LC-8LF, #81217, 60â€™ Long Reach, 33.5â€? Shoes, New Paint, 4500 Hrs ............................................................$156,000

2004 Komatsu D65EX-15, #80847, Cab/AC, 26â€? Shoes, Ripper, 4700 hrs ..............$159,500

2000 Bomag BW177DH-3, #81208, OROPS, Single-Smooth Drum, 1950 Hrs............$39,500

3-to-Choose!! Bomag BC1172RB Landfill Compactor, Cab/AC, Straight Blade, 7200+ hrs.. ........................................................Call Today!

2006 Komatsu PC400LC-7EO, #81398, 13â€™ Arm, 35.5â€? Tracks, HKX Kit, JRB QC, PSM Thumb, 4700 Hrs ................................$189,500

2007 Komatsu D41E-6, #91419, Cab/AC, 6-Way Blade, 20â€? Shoes, 2025 Hrs ......$84,500

1998 Komatsu PC300LC-6LC, #91161, Aux Hyd, QC, 8950 Hrs ..........................................$82,500

2004 Komatsu HM400-1, #80617, Tailgate, 6900 Hrs................................................$189,400

2003 Komatsu WA450-5, #81365, Cab/AC, GP Bkt w/BOE, 8700 Hrs ..........................$114,500

2005 Komatsu WA200-5, #81316, Cab/AC, JRB QC/Bkt, LSD Axles, 4550 Hrs ................$99,500

2005 Komatsu D65EX-15, #80659, Cab/AC, Drawbar, 3750 hrs ..............................$149,500

Page 10 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Road Machinery Expands Sales Group in Phoenix Area Road Machinery in Gilbert, Ariz., has expanded its sales group. “At Road Machinery, we have always known that the customer comes first. And by increasing our sales force, we feel that having more representatives available to interact with customers is well worth the investment,” said Weston, general manager. “With men like Corey Barton, I know our customers are in good hands,” continued Weston. “Road Machinery turned out to be his first job, which gave us the opportunity to train him from the ground up. After covering the southern region of Arizona from Casa Grande to the Mexico border and from California to western New Mexico, we felt he was ready for additional responsibilities. We added Corey to our staff and he now also covers the West Phoenix Valley.” Paul Lull brings experience from companies such as John Deere Ag and Bingham Equipment where he worked his way up to store manager and most recently, the JCB dealership in Phoenix. “With his 30 plus years in the industry, Paul has experienced most of what can be asked of him as far as customer requests and provide for the customers’ needs,” Weston said. Lull’s territory is the entire southeast side

of Phoenix, including Gilbert, Mesa and Tempe. Ken Galas started in the construction industry in the parts department of Case Power & Equipment. His successes in the industry includes selling over 110 million of equipment, the most ever sold by an individual for Case. “I plan on using my talents and contacts to help Road Machinery become the ‘go-to-

dealership’ when area contractors need a new piece of equipment or service on their existing equipment,” Galas stated. His assigned territory is all of Phoenix west of I-17 and north of the 202, which includes Phoenix, Scottsdale and Fountain Hills. “I feel confident that men such as Barton, Lull and Galas will only enhance Road Machinery’s relationships with our existing

and potential customer base,” Weston concluded. Road Machinery is the authorized dealership of Komatsu, in the states of Arizona, Southern California and New Mexico. In Arizona, Road Machinery also is an authorized dealer of the Wirtgen Family of products (Wirtgen, Hamm, Vogele and Kleemann) Terex-Fuchs and Finn product lines.

Corey Barton covers the west Phoenix Valley.

Ken Galas’ assigned territory is all of Phoenix west of I-17 and north of the 202, including Phoenix, Scottsdale and Fountain Hills.

Paul Lull’s territory is the entire southeast side of Phoenix, including Gilbert, Mesa and Tempe.

Portland, Ore., Recycling Facility Numbers Get Boost From Nonresidential Expands, Improves Operation EXPANSION from page 1

Early this year the facility’s processing capabilities were expanded, as Tualatin, Ore.-based Construction Equipment Company (CEC) streamlined the facility’s product handling/preparation operations by combining the separate processes into one. The streamlining and efficiency upgrade was part of a $500,000 design and build contract that included the design and installation of new equipment and alterations to existing facility equipment. The services conducted by CEC enabled the facility to process a typical year’s worth of materials during the first four months of this year, according to Gary Smith, owner of CEC. The main service involved the reworking of the facility’s yard flow, which included the integration of crushing and scalping processes to eliminate double handling of materials. To achieve this, CEC built and installed a new 133 by 152 ft. (40.5 by

46.3 m) horizontal shaft impact crusher — with a customized 4.3 by 20 ft. (1.3 by 6.1 m) vibrating Grizzly feeder and separate conveyor for scalped

The services conducted by CEC enabled the facility to process a typical year’s worth of materials during the first four months. material — and installed a new, company-built 2.5 by 60 ft. (0.8 by 18.3 m) stacking conveyor, and an Okadabrand processor for initial material prep. CEC also custom designed a feeder system that removes any dirt from the system and takes it directly to an existing 5 by 12 ft. (1.5 by 3.7 m) Screen-It for dirt removal, scalping, and rock

recovery. The rock is then fed back into the crushing circuit. As part of the facility redesign, CEC used and made alterations to the facility’s existing 5 by 16 ft. (1.5 by 4.9 m), three Deck El-Jay finish screen and several conveyors. Asphalt processed at the Sunderland facility is typically over-sized and requires some downsizing to make it usable for the production of rock. The asphalt is mixed with concrete as it is fed into the crushing machine to ensure an end product that meets construction specifications. Concrete chunks brought to the facility are downsized and mixed with asphalt as it is fed through the crushing machine to make 1.5 in. (3.8 cm) minus aggregate. Construction Equipment Company provides portable rock crushing and screening equipment for the aggregate, recycle, compost and wood waste industries. The company is currently known for manufacturing the largest screen machine in the world.

Construction in April SPENDING from page 1

struction, and 3.2 percent in private office construction. The economist said the steep drop in public construction, which fell for the seventh straight month in April — by 1.9 percent — and shrank to a four-year low, was cause for concern. “It appears that federal stimulus and military base realignment work are tapering off, while state and local budgets for infrastructure have been shrinking for some time,” he said. The four largest public categories, accounting for threefourths of public construction spending, all declined in April: highway and street construction, minus 1.6 percent; educational, minus 2.7 percent; transportation facilities, minus 3.8 percent; and sewage and waste disposal, minus 2.5 percent. Association officials said the mixed results show the importance of enacting long-term infrastructure funding bills for transportation, wastewater and drinking water, as well as having a tax and regulatory environment that encourages private investment in structures. “Economic recovery will remain sluggish and uneven unless construction and the sectors that depend on it share in growth,” said Stephen E. Sandherr, the association’s chief executive officer.

Pages 11-17

Crushing, Screening & Recycling Section Metso’s HP4 Proves Its Value in Multiple Applications Miller Machinery President Mike Miller has been tearing down crushers, identifying their problems, machining parts and getting involved in the start-up and evaluation of their performance since he was 14 years old. So it’s no small compliment when he says that Metso’s HP4 is one of the most versatile pieces of machinery he’s ever used. “I just think it’s an amazing crusher,” he said. “We bought three of them from Metso and they have been outstanding in every application where we’ve used them.” As a Metso distributor based in Longview, Wash., Miller covers large areas of the Pacific Northwest, and the demands on his machinery vary considerably. Of the three HP4s he operates, he said that “We put one in an extremely demanding stationary application in a large quarry in the Seattle area to replace a failing competitor’s machine; we swapped out another competitor’s crusher on a customer’s portable plant; and we have a portable plant we built ourselves which has been very successful in several different applications as a rental unit.” Consistent Output The HP4s have continually yielded higher production and produced a consistent output gradation due to the unique on-plant feed hopper/belt feeder that helps optimize the choke level in the cone. “It’s essential to maintain consistent cavity level in the crusher’s feed hopper to yield a consistent output gradation,” said Miller. “Our HP4 portable plant can handle that comfortably with our on-board cone feed belt and 6 cubic yard feed hopper that can swallow the surges in feed coming from the primary side of the plant. Our customers informed us that they were able to achieve less than 1½ percent variance from target values in their gradations, a feat they never achieved with their previous crushing spreads. ” Customers also are impressed with the crusher’s ability to pull upwards of 450 amps with absolutely no ring bounce. “The HP4’s claim to fame is its tremendous crushing force and ability to run at tight settings that were never possible before and pull maximum power from the motor,” said Miller. “It has exceptionally high tramp

relief forces that virtually eliminate your concerns for ring bounce, which is one of the leading causes of catastrophic failure in cone crushers.” With changing product requirements and the trend towards finer materials requirements, the crushed aggregate mix for an asphalt plant requires a lot of power. “The tighter you can maintain the setting on the cone crusher, the more productive and efficient the crusher will be,” said Miller. “And that’s what really separates the HP4 from its competitors.”

HP series cone crushers, which means more mass to wear on. It also has a unique antihead spin device which significantly reduces liner wear during initial feed stage of operation. Additionally, the HP4 liners do not require epoxy backing material, which means that when they’re replaced cure-time for the epoxy is eliminated. The resultant increased availability of the crusher to resume production yields higher annual plant output than previously possible.

Wears Reduced Miller noted that the HP4 has proven to yield exceptionally good mantle and bowl liner wear life as compared to other cone crushers. A couple of factors influencing this are that the HP4 design allows for the use of thicker liners by comparison to the original

Development Team Miller recently joined the Metso construction group’s North American Crusher Development Team. Adrian Quigg (VP Distributor Sales, Americas) invited Miller to participate in the team, which had its first meeting in York, Pa. “We focused on reviewing existing prod-

The HP4’s claim to fame is its crushing force and ability to run at tight settings.

ucts to see where they fit in the market and to identify niche opportunities for other new and improved products,” said Miller. “We discussed HPX technologies and identified a wide range of applications where we could put the HP4 to good use to benefit of our customers.” The group’s goal is to further develop crushing machinery that will most efficiently yield the best quality crushed aggregate products, while minimizing the overall operation costs, in a safe and environmentally friendly manner for the customer. “Metso’s support and dedication to offering high performance crushing machinery has been a key factor in allowing our company to be successful in the pursuit of offering our customers results they can count on,” Miller said. For more information, visit www.metso.com.

Page 12 • June 18, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Powercrusher™ Crushers & Screeners from Atlas Copco

Rock Star

The Raptor XL1100 cone crusher can draw up to 1,200 hp (894 kW), delivering production capabilities of up to 2,240 tph (2,000 t) at a 1-1/3-in. (3.3 cm) closed-side setting.

There are many reasons why the Powercrusher is a star. The 11 models of crushers and six models of screeners offer capacities ranging from 250 to 500 tons per hour. Other features include: t Jaw crushers that use Quattro Movement, a figureeight motion that increases feeding capacity and produces a post-crush at the outlet—like two crushers in one. t A pre-screen feature available on the PC 6 model for higher value end product. t Track mounted for mobility and maneuverability in a smaller footprint. t National support for parts and service from Atlas Copco Powercrusher—POWER is just the beginning. 800-732-6762 Atlas Copco Construction & Mining www.atlascopco.us

Raptor XL1100 Ideal for High-Tonnage Operations The Raptor XL1100 cone crusher, from FLSmidth Pekin LLC can draw up to 1,200 hp (894 kW), delivering production capabilities of up to 2,240 tph (2,000 t) at a 1-1/3-in. (3.3 cm) closed-side setting. Ideal for hightonnage mining operations, the unit handles feed size up to 24 in. (62 cm) and allows a reduction ratio of up to 6:4. The Raptor XL1100 cone crusher incorporates a heavy-duty hydraulic design that improves the durability of the tramp release components, while reducing the number of accumulators required. This hydraulic configuration reduces ongoing maintenance costs while delivering performance and reliability, according to the manufacturer. FLSmidth’s “fail safe” hydraulic protection system also provides an external relief that prevents severe structural overloads if an accumulator bladder should fail — protecting both the hydraulic system and the crusher. Advanced overload sensing technology detects crushing force overload. A simple alarm is activated, or the system can be automated to take corrective action. This same advanced automation system can be used to optimize crusher performance, with feed control, setting adjustment and monitoring of all critical lubrication and hydraulic parameters. Powered by a 1,000 hp (745 kW) motor, the XL1100 cone is designed to operate and

remain mechanically sound at a wide range of eccentric speeds. Because of this versatility, the eccentric speed can be selected to maximize throughput, size reduction and product yield. Eccentric surface finish is critical to bearing longevity under high-performance crushing conditions, and the XL1100 cone’s advanced eccentric is a nodular iron casting of high-strength material with machinability and surface finish characteristics. The Raptor XL1100 cone has an alloyed cast steel threearm frame with one oversized arm used for the countershaft cartridge. The Raptor XL1100 cone crusher employs spiral-bevel gear technology for a combination of durability and reliability while minimizing gear noise. Available with shorthead or standard bowls, the XL1100 cone is practical for secondary, tertiary and quaternary applications. An additional safety feature standard on all Raptor models is the counterclockwise rotation crushing action that protects the machine if adjustment ring movement is excessive or if the ring gear brake fails, according to the manufacturer. The growing family of Raptor high-performance cone crushers includes the XL300, XL400, XL500, XL600, XL900, XL1100, XL1300 and XL2000. For more information, call 801/871-7000 or visit www.FLSmidth.com/Raptor.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 18, 2011 • Page 13

Page 14 • June 18, 2011 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

WHY SETTLE FOR LESS? Midco Offers the Finest in New Hydraulic Hammer and the Highest Quality in Rebuilds! MIDCO Demolition Tool Company Performs a Complete Teardown & Complete Rebuild We are Including: your newly 1 - Remove the head. 2 - Pull the cylinder. 3 - Hot pressure wash the entire unit. 4 - Polish piston & check tolerances. - Rebuild & charge accumulator. - Install all new seals. - Repaint to spec. - Install new chisel & bushing. - All hammers include new hoses, seals, chisel or moil points, paint, OEM decals and final hammer testing.

authorized Chicago Pneumatic dealer. 5 6 7 8 9

MIDCO Rebuilds Hammers from 200 lbs. to 10,000 lbs. MIDCO Demolition Tool Company... Your “One-stop Shop” for New, Used and Rebuilt Hydraulic Hammers Plus Over 1,300 Hammer Tools and Parts for Sale!

OEM REPAIR FACILITY - DALLAS, TEXAS Call David Spainhour in Dallas,TX

214-688-0444 Fax 214-630-5419 Email dspainhour@midcosling.com

Authorized Dealer:

SALES • SERVICE • PARTS

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 18, 2011 • Page 15

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy”

Rasmussen Equipment Co. www.rasmussenequipment.com West Valley City, UT 801/972-5588

Waukesha-Pearce Industries, Inc.

Bane Machinery Inc.

Corporate Office: 12320 So. Main • Houston, TX 77035 713/723-1050 • Fax: 713/551-0798 www.wpi.com

www.banemachinery.com

Tomball, TX 281/351-9016

Port Arthur, TX 409/721-5305

Edinburg, TX 956/386-0107

Kilgore, TX 903/984-2011

Corpus Christi, TX 361/884-8275

San Antonio, TX 210/648-4444

Pflugerville, TX 512/251-0013

2449 Manana Rd. Dallas, TX 75220 214/352-2468

10505 North Fwy. Fort Worth, TX 76177 817/847-5894

Bejac Corporation www.bejac.com 569 S. Van Buren St. Placentia, CA 92870 714/528-6224

5501 East St. Anderson, CA 96007 530/378-0881

6934 Florin-Perkins Rd. Sacramento, CA 95828 888/655-3077

1445 Simpson Way Escondido, CA 92029 877/54-BEJAC

Page 16 â€˘ June 18, 2011 â€˘ www.constructionequipmentguide.com â€˘ Recycling Section â€˘ Construction Equipment Guide

These Grinders Mean Business.

This VisitVisit One of These Duratech Dealer Today! DuraTech Dealers Today!

5064 Horizontal Grinder 'XUD7HFKÂˇV YHUVDWLOH 1(: +RUL]RQWDO *ULQGHU LV EXLOW WR PHHW DOO \RXU JULQGLQJ QHHGV 1RW RQO\ LV WKH DYDLODEOH RQ HLWKHU D WUDFN RU WUDLOHU EXW \RX FDQ DOVR FKRRVH IURP WKUHH GLIIHUHQW OHYHOV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS NZ WR KS NZ 7KH ODUJH IHHG RSHQLQJ DQG LQ KDPPHUPLOO PD[LPL]H JULQGLQJ FDSDFLW\ DQG PLQLPL]H MRE WLPH 7KLV PLGVL]HG JULQGHU LQFUHDVHV \RXU HIĂ€FLHQF\ DQG PD[LPL]HV \RXU LQYHVWPHQW

Kelly Equipment 184 Woodlawn St. Upland, CA 91786 800-288-7933 Fax: 909-920-4558 www.kellyequipment.com

PO Box 1940 â€˘ Jamestown, ND 58402-1940

Flexco Introduces Stainless Steel Belt Conveyor Cleaners Four of Flexcoâ€™s belt conveyor cleaners are now being offered in stainless steel. The Mineline MSP standard-duty precleaner, Mineline MMP medium-duty precleaner, Mineline MHS heavy-duty secondary cleaner, and Eliminator U-Type secondary cleaner are all available in stainless steel. â€œWe developed these cleaners based on increasing demand from markets requiring stainless steel cleaner options,â€? said Ryan Grevenstuk, BCP product manager of Flexco. â€œWe arenâ€™t simply focusing on certain components of the cleaners. These are full stainless steel products that can handle even the most demanding, abusive beltlines.â€? The Flexco line of stainless steel cleaners can be used in any application, but are ideal for use in aggregate operations, copper mines, fertilizer plants, power plants, salt plants, sugar plants, ports and other corrosive environments. Most of the cleaner sizes require a one-day lead time. For more information, call 800/541-8028 or visit www.flexco.com.

Four of Flexcoâ€™s belt conveyor cleaners are now being offered in stainless steel.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 18, 2011 • Page 17

5x12 Three Deck Screen-It

SC 300 Closed Circuit Cone Crusher

6x16 Track w/Front Conveyor

Dodd Equipment 2301 West Buckeye Rd. Phoenix, AZ 85009 602-477-0110 www.doddequipment.com

Page 18 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 19

ASCO SUPPLY CO., INC. Austin, TX San Angelo, TX San Antonio, TX Wichita Falls, TX www.ascoeq.com

512/272-8922 325/655-5666 210/333-8000 940/687-2726

HI-WAY EQUIPMENT Alvin, TX Beaumont, TX Brenham, TX Bryan, TX Houston, TX Houston North www.hiwayequip.com

281/331-1521 409/212-8100 979/836-6641 979/779-8942 713/649-0940 281/987-1990

ABILENE NEW HOLLAND, LTD. Abilene, TX www.anhltd.com

325/675-0602

AMARILLO MACHINERY CO. Amirillo, TX 806-372-7800 www.amarillomachinery.com

NUECES POWER EQUIPMENT Corpus Christi, TX Edinburg, TX Laredo, TX San Benito, TX Victoria, TX Vinton (El Paso) TX www.nuecespower.com

361-289-0066 800-848-0790 956-702-0066 956-725-0066 956-361-0066 361-576-0066 915-541-0066

BANE MACHINERY INC. Dallas, TX 214-352-2468 Ft. Worth, TX 817-847-5894 Tyler, TX 800-594-2200 www.banemachinery.com

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT Oklahoma City, OK Tulsa, OK www.linkbeltok.com

405-917-9191 918-835-7200

HISTORY KCMA’s parent company, Kawasaki Heavy Industries, has over 100 years of experience providing technology solutions. Kawasaki Heavy Industries is a global supplier of innovative engineering with a portfolio ranging from jet turbines to bridge design to construction equipment.

TECHNOLOGY BEJAC CORPORATION Placential, CA Sacramento, CA Redding, CA San Diego, CA www.bejac.com

800-77-BEJAC 888-655-3077 530-378-0881 800-54-BEJAC

APCO EQUIPMENT North Las Vegas, NV 702-871-7474 www.apcoequipment.com

Kawasaki is the most experienced manufacturer of articulated wheel loaders in the world. Since introducing our first models in 1962, we have maintained a leadership position in technology, service, and support. Backed by the massive resources of Kawasaki Heavy Industries, KCMA Corporation’s focus on wheel loaders translates into real benefits for you and

your business. Kawasaki articulated wheel loaders incorporate innovative design features coupled with extensive knowledge and experience gained from real-world applications. Kawasaki pioneered Z-Link design to provide unmatched utility, high breakout force and efficiency in its machines.

INNOVATION, Technology in Motion Kawasaki engineers work with end users all over the country to access and review their wheel loader needs. With in-house special application engineers, Kawasaki is capable of responding to new industry demands quickly with comprehensive solutions. Kawasaki operates its own rebuild center. This fully equipped facility is

staffed by skilled technicians with the in-depth knowledge and specialized equipment. Kawasaki provides a totally focused approach to support your business. From carefully designed programs and services to engineered special applications options, your Kawasaki wheel loader is ready to tackle the most demanding applications and environments.

2140 Barrett Park Drive, Suite 101 Kennesaw, Georgia 30144 770-499-7000 www.kawasakiloaders.com

Page 20 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ June 18, 2011 â€¢ Page 21

KIRBY-SMITH MACHINERY INC.

LOADERS From Komatsu - The Loader Experts

6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 www.kirby-smith.com

POWER MOTIVE CORPORATION 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Fax: 303-388-9328 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-339-4098

ROAD MACHINERY LLC ,PNBUTV 8IFFM -PBEFST EFMJWFS IJHI QSPEVDUJWJUZ MPX GVFM DPOTVNQUJPO FBTZ NBJOUFOBODF BOE TVQFSJPS PQFSBUPS DPNGPSU 5IF 8" 1; 8" 1; BOE 8" 1; GFBUVSF ,PNBUTV T FMFDUSPOJDBMMZ DPOUSPMMFE )ZESPTUBUJD 5SBOTNJTTJPO )45 XJUI ,PNBUTV T 1; 1BSBMMFM ; CBS MJOLBHF t )45 EFMJWFST IJHI QPXFS FYDFMMFOU SFTQPOTF BOE MPX GVFM DPOTVNQUJPO t 5IF 1; MJOLBHF QSPWJEFT QBSBMMFM MJGU IJHI CSFBLPVU GPSDF BOE IJHI MJGU DBQBDJUZ t 7BSJBCMF 5SBDUJPO $POUSPM XJUI 4 .PEF SFEVDFT UJSF TMJQQBHF t %ZOBNJD CSBLJOH FBTFT PQFSBUJPO BOE FYUFOET XFU EJTD CSBLF MJGF

X XXX LPNBUTVBNFSJDB DPN XX LPNBUTVBNFSJDB DPN

4710A E. Elwood â€¢ Suite 6-7 Phoenix, AZ 85040 602-252-7121 Fax: 602-253-9690 Gilbert, AZ 480-778-5621 Tucson, AZ 520-623-8681 Prescott, AZ 928-778-5621 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601 El Paso, TX 915-872-1001 Bakersfield, CA 661-695-4830 Perris, CA 909-355-3600 Redding, CA 530-229-3822 Sacramento, CA 916-375-3540 Cananea, Sonora, Mexico 011-52-6453328300

Page 22 â€¢ June 18, 2011 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ June 18, 2011 â€¢ Page 23

The new LBX Link-Belt X3 series of excavators offer a variety of features that combine to make WKLV WKH PRVW IXHO HIÂ¿FLHQW DQG HQYLURQPHQWDOO\ friendly Link-Belt series ever: Â‡ (QKDQFHG K\GUDXOLFV LQFUHDVH VSHHG DQG HIÂ¿FLHQF\ Â‡ 7KUHH LGOH PRGHV KHOS WR HOLPLQDWH IXHO ZDVWH Â‡ (3$ FHUWLÂ¿HG 7LHU $ FRPSOLDQW ,VX]X HQJLQHV Â‡ (DV\ PDLQWHQDQFH ZLWK JURXQG OHYHO DFFHVV WR DOO Â¿OWHUV Â‡ 6HWXS DQG WUDFN VHUYLFH LQWHUYDO WLPHV RQ GLIIHUHQW LWHPV ZLWK RXU QHZ +' Â´ /(' PRQLWRU Â‡ 6HW DX[LOLDU\ K\GUDXOLF Ã€RZV DQG SUHVVXUHV IURP LQVLGH WKH FDE PRQLWRU IXHO XVDJH DQG REVHUYH WKH QHZ UHDU YLHZ FDPHUD RQ WKH FRORU /(' PRQLWRU Â‡ 2QH SLHFH UHLQIRUFHG WXUQWDEOH EHDULQJ WXE ZHOGHG RQ WKH WRS DQG ERWWRP IRU LQFUHDVHG VWUHQJWK Â‡ 1HZ ODUJHU UHLQIRUFHG 5236 FHUWLÂ¿HG FDE In addition to these improvements, all X3 excavators come with the best standard warranty in the industry.

Visit your Link-Belt excavator dealer today and experience the X Factor for yourself. ; 0DFKLQH 6SHFLÂ¿FDWLRQV 250 X3

250 X3 LF

300 X3

350 X3

Weight: ............................ 55,336 lbs......... 61,950 lbs ......... 65,918 lbs ........ 80,028 lbs Arm:.................................. 9 ft 10 in ............ 26 ft 3 in............ 10 ft 5 in ............ 10 ft 8 in Bucket Weight: ................ 1,790 lbs............. 750 lbs ............. 1,940 lbs .......... 2,580 lbs Horsepower:......................... 177 hp ................. 177 hp ................. 207 hp ................ 266 hp Max. Dig Depth: ............... 22 ft 8 in ............ 47 ft 9 in............ 23 ft 4 in ............ 24 ft 1 in ISO Breakout Force: ....... 29,000 lbf ........... 9,060 lbf........... 34,400 lbf .......... 40,020 lbf Bucket Digging Force: ...... 39,120 lbf .......... 18,570 lbf.......... 42,760 lbf .......... 55,750 lbf Swing Torque: ............... 55,243 lbf-ft ...... 51,482 lbf-ft ....... 68,151 lbf-ft ...... 82,607 lbf-ft Bucket Range: .............. .76 -2.43 yd3 ...... .50 - .86 yd3 ...... .76 - 2.43 yd3 ... 1.08 - 2.93 yd3

Page 22 â€¢ June 18, 2011 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ June 18, 2011 â€¢ Page 23

Visit your Link-Belt excavator dealer today and experience the X Factor for yourself. ; 0DFKLQH 6SHFLÂ¿FDWLRQV 250 X3

250 X3 LF

300 X3

350 X3

Page 24 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tom Growney Equipment, Inc.

www.growneyinc.com Hobbs, NM El Paso, TX 2301 Candelaria Road N.E. Farmington, NM Albuquerque, NM 87197 505/326-1101 505/392-6923 915/598-1133 505/884-2900 Fax: 505/884-8790

BEE EQUIPMENT SALES LTD. 2506 Slaton Highway Lubbock, TX 79404 806/745-1511 Fax: 806/745-1542

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 25

Let us re-introduce ourselves.

Formerly a division of Ingersoll Rand, we’re known for innovative solutions and inspiring service. We’re the portable power product that actually needs no introduction, except for our new name.

COMPR E SS O R S G E N E R AT O R S LIGHTING SYSTEMS

DOOSAN PORTABLE POWER.

DRILL AIR MODULES L I G H T COMPAC T I O N T RUCK- MOUNT ED EQUIPMENT

Air Compressor Solutions, Inc.

Volvo Construction Equipment & Services

Odessa, TX (432) 335-5900

Bakersfield, CA (661) 387-6090

Ditch Witch of Arizona

Fresno, CA (559) 834-4420

Phoenix, AZ (602) 437-0351 (602) 437-1544 (Fax)

Ditch Witch of Southern Arizona

San Leandro, CA (510) 357-9131 Sacramento, CA (916) 388-2244

Tucson, AZ (520) 579-0261 (520) 579-0268 (Fax)

San Diego/ Lakeside, CA (619) 441-3690 Corona, CA (951) 277-7620 Arlington, TX (817) 633-1010 Houston, TX (713) 681-9221

Pape Material Handling Inc. /

Bobcat West

www.papemh.com

www.bobcatwest.com

7000 SW Sandburg Rd. Portland, OR (503) 639-8910

9892 40th Avenue South Seattle, WA (206) 722-5800

1224 North California Avenue Pasco, WA (509) 545-1959

7909 N. Upland Dr. Portland, OR (503) 286-6400

19705 60th Avenue NE, Suite B1 Arlington, WA (360) 474-8461

4890 Contractors Drive Wenatchee, WA (509) 884-2934

29550 Airport Road Eugene, OR (541) 689-7407

1307 54th Avenue East Fife, WA (253) 926-4386

5518 East Broadway Spokane, WA (509) 536-7300

500 Pech Road Medford, OR (541) 779-3444

3896 Irongate Road Bellingham, WA (360) 756-6572

25 Vista Boulevard Sparks, NV (775) 356-9333

909 South 18th Street Yakima, WA (509) 248-5636 Doosan DoosanPortable IngersollPower Rand

Find Us on

DoosanPortablePower.com

(800) 633-5206

Page 26 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

B C usiness

alendar

The AGC of ST. Louis is excited to announce a new award to recognize excellence among the Specialty Contractor members of the AGC of St. Louis. Through a secret ballot process, AGC General Contractors will vote for FIRST PLACE specialty contractor in ten separate categories: Concrete/Paving Earthwork & Utilities Electrical Environmental Remediation & Demolition Finishes, Openings & Fixtures Masonry Mechanical Structural & Finish Carpentry Structural & Finish Metals Thermal & Moisture Protection

It ’s been our mission for decades, ever since Doosan star ted selling large equipment in Nor th Amer ica. Doosan deliver s for oper ator s – so they can get more done on the job. Power ful, productive machines. Incredible uptime and ease of maintenance. And our suppor t can’t be beat. With strong dealers, f ac tor y - t r ained technicians , r oad ser v ice t r uck s and t he indu s t r y ’s onl y 48-hour par ts guarantee we think you’ll agree. Doosan delivers. Contact your local Doosan dealer for more infor mation.

DOOSAN DELIVERS

Performance

Durability

Comfort

Fuel Efficiency

Easy Maintenance

Each first place contractor will be recognized with a FIRST PLACE award in the specified category. The Specialty Contractor receiving the highest number of votes overall will also be awarded the distinction of Specialty Contractor of the Year by the AGC of St. Louis. This award allows the General Contractors to publicly acknowledge those best practices. To be eligible, a Specialty Contractor must be a member of the AGC of St. Louis. The Specialty Contractor award recipients will be named and presented their awards at the AGC of St. Louis Awards Gala featuring the Keystone Awards & the Specialty Contractor of the Year on Thursday, November 3, 2011 at the Millennium Hotel in downtown St. Louis. You won’t want to miss this event as we name the first Specialty Contractor of the Year! AGC of ST. LOUIS…The Keystone Awards Call for Entries is Coming!!! The Keystone Awards are approaching quickly! Be on the lookout for the Keystone Awards Call for Entries flyer, and start thinking about which projects you are going to submit in this year’s program! AGC Volunteer Appreciation - The AGC of St. Louis is grateful for the many members who serve on committees. The time devoted by these individuals and the knowledge they share with the industry in very important to the success of the AGC. July 18-20, 2011 – Workshop. Illinois Association of Aggregate Producers (IAAP) Illinois Teachers Workshop: Teachers from your community should register. The IAAP’s Public Information and Education Committee

will hold its 15th annual Illinois Teachers Workshop: Rocks, Minerals & Mining in Today’s Society at Lewis University in Romeoville, Illinois on July 18 to 20, 2011. This workshop is proving to be very popular. Teachers have begun registering and we are now 1/3 of the way to our capacity of 35 teachers. The goal of this workshop is to inform teachers in grades K-12 about the importance of rocks, minerals, and mining in everyday life. Questions? Please call, Shawn McKinney, Outreach Manager, IAAP, 1115 S. 2nd Street, Springfield, IL at 217-241-1639. IT’S RED BIRD SEASON IN THE NEW STADIUM!!! 2011 St. Louis CARDINALS Tickets are now available! The AGC of St. Louis has a luxury suite this season at Busch Stadium. The 2011 price for a single game is $1,900. Three game packages are available for $5,700, and five game packages are priced at $9,500. All food and beverages costs are in addition to these fees. You may reserve your choice of game packages by listing the package number and emailing information to dpigg@agcstl.org. Reservations will be held in the order your request is received. The game dates are firm, however, the Cardinals say that some game times may be changed to accommodate national television. If you have questions, please call Donna M. Pigg, Administrative Accountant, at 314-781-2356 extension 108. AED Executive Forum September 8-9, 2011, Rosemont, Illinois This two-day event will combine information on the trends and issues that are shaping the future of equipment distribution with an opportunity to network with senior-level industry executives. An impressive group of leaders will share their insights and perspectives and challenge you with new answers to old problems. Successful 2010 Build St. Louis Expo. The Build St. Louis Expo was a great success! The aisles were full of representatives from all facets of the industry. All of the booths were sold, so attendees had some great new specialty contractors to meet and view new products on the market by the suppliers. The expo gave another meaning to the words “social networking” and actually shaking hands. Our appreciation to our industry participants – St. Louis Council or Construction Consumers, AIA St. Louis, St. Louis Minority Business Council and Contractors Assistance Program who helped promote the event to their members. 211169A01 4.25"

Doos an ® is a r e gis t e r e d t r a d e m a r k of Doo s a n In f r a c or e Co., L td. in t h e Unit e d S t a t e s. © 2 0 11 Doo s a n In f r a c or e Cons t r u c tion Equip m e n t A m e ric a . A ll righ t s r e s e r v e d. | 0 6 112 19

Au thor ized Doos an De aler s

C CALIFORNIA ALIFORNIA

Bejac Corporation Placentia

Escondido

714-528-6224 760-796-6561 800-77 %(-$& ì EHMDF FRP

TE TEXAS X AS

H&V Equipment Ser vices, Inc. Corpus Christi

Progreso

361-241-1000 956-565-3788 ŧŧŧǍŤŨŧǍŤťťŢ ì hvequipment.com

OKLAHOMA O KLAHOMA

H&E Equipment Ser vices Oklahoma Cit y

Tulsa

405-789-7368 918-445-2666 he-equipment.com

UTAH UTAH

Mesco, Inc. Nor th Salt Lake 808-936-3890 ŧşşǍŢŨŦǍŠťšŨ ì mescoequipment.com

small step no. 34

FETCH THIS PAPER YOURSELF TAKE A SMALL STEP TO GET HEALTHY www.smallstep.gov

Attachments

SECTION

Pages 27-29

Attachments Transform Off-the-Shelf Machine Into Producer “We were chomping at the bit to use this thing. They did a lot of work to make this thing right and to make it work for us. In terms of fit and finish, we couldn’t ask for anything more.” Bruce Howard Bruce Howard Contracting

Bruce Howard’s excavator has been custom accessorized.

Geith and Case worked together to design Bruce Howard’s dream machine.

To everyone else it’s an excavator. To Bruce Howard’s team, the machine with its customized suite of Geith attachments is part dream come true and part Swiss Army Knife — an incredibly versatile tool, capable of tackling any job, big or small. And Howard has more than a few jobs that needed doing…and doing well. “We’re a small business that’s been fortunate enough to grow,” said Howard, owner of Bruce Howard Contracting in Lenaxa, Va. “We do a variety of projects, from site clearing work to projects for utilities, as well as work for residential and commercial construction companies. I need machines and equipment that can be as flexible as the jobs we take on.” So with a need to be productive

and profitable on his mind, Howard went to Lawrence Equipment, the Case dealer in Ashland, Va. He knew his jobs and crew would get a boost from a modified excavator and trustworthy attachments that were strong and reliable, but also versatile and precise. He made a list of what his dream machine would include: wider tracks for maximum flotation in wet areas, extended dozer blade, short stick… the list went on… That’s where Steve Kelly, service manager of Lawrence Equipment, came into the picture. The two men had known each other since Howard’s earliest days in business when he bought his first equipment from Joe Gomer at Gomer Equipment, a widely

respected figure in the region’s construction sector. Kelly and Howard did business occasionally over the years, and Kelly was intrigued by this new challenge. They talked it over and ultimately agreed that Geith attachments on the recommended CX135 excavator would provide the durability, versatility and functionality to cover the full spectrum of jobs Howard’s company tackles. Kelly (along with Sean O’Reilly at Geith) worked with Howard as a guide and problem solver on the ambitious package: a Geith hydraulic quick coupler, shortened boom, hydraulic progressive link thumb, 60-in. (152 cm) hydraulic see ATTACHMENTS page 28

Page 28 • June 18, 2011 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 73137 800/375-3339 Fax: 405/787-5973 12321 E. Pine St. Tulsa, OK 74116 800/375-3733 Fax: 918/437-7065 1629 Vision Dr. Abilene, TX 79602 877/577-5729 3922 I-40 East Amarillo, TX 79103 800/283-1247 8505 So Central Expwy Dallas, TX 75241 800/753-1247 1450 NE Loop 820 Fort Worth, TX 76106 877/851-9977 3201 E Slaton Rd Lubbock, TX 79404 866/289-6087

Geith Helps Turn Excavator Rototilt Attachments Useful Into a ‘Swiss Army Knife’ for Wheel Excavators ATTACHMENTS from page 27

tilt bucket and 36-in. (91 cm) digging bucket, the extra-wide tracks and an extra long custom-welded dozer blade. Modifications completed, all that was left were the final touches. “We had our painter clean it up and make it look factory fresh,” said Kelly. “We were chomping at the bit to use this thing,” Howard said. “They did a lot of work to make this thing right and to make it work for us. In terms of fit and finish, we couldn’t ask for anything more.” The moment of truth: taking the “mini on steroids” (as nicknamed by Howard’s foreman Jamie Parsley) out on its first job. “It worked flawlessly,” said Howard. The operator could sit by himself, switch attachments in a matter of moments and grab logs with the thumb or a piece of concrete on the fly, according to Howard. “It’s about as close as you can get to digging with a human hand,” Howard said. Now Howard is taking on new jobs …

unusual jobs… using this machine with its zero tail swing, quick coupler and diverse tools. “It allows us to switch buckets and clean up behind us,” said Howard. “We don’t have to use additional equipment. We don’t need additional rentals. So we don’t end up with wasted time.” And there’s no money wasted on excess rentals, as well, he said. While Howard’s confident the machine and its Geith attachments will pay off in productivity, he’s not sure if getting the tricked out machine was the best or worst decision he’s ever made. “I’m going to need four more of these machines because my guys are always fighting over who gets to use it” he joked. “They keep it looking like new because they know that the longer they take better care of it, the more they’ll get to use it. So now it’s the prettiest machine around.” For more information, visit www.geith.com.

Rototilt combines continuous rotation, 40 degree side tilt in each direction, and a hydraulic quick coupler all in one package.

With the maneuverability of wheeled excavators, and the flexibility of the Rototilt attachment, this versatile combination is ideal for highway, county, or municipal applications. Very common in Europe, wheeled excavators and the Rototilt attachments are becoming more popular in North America. Rototilt combines continuous rotation, 40 degree side tilt in each direction, and a

hydraulic quick coupler all in one package. It allows a bucket or other attachment to be rotated and tilted at the same time, making it simple to operate around or under obstacles, and for any type of ground contouring. The combination of continuous rotation and side tilt lets the worker approach the job from any angle. For more information call 519/754-2195 or visit www.indexator.us.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • June 18, 2011 • Page 29

Genesis Grapple Reduces Maintenance, Increases Durability

VTN Rotobec provides high quality demolition and recycling attachments for today’s contractors. With unmatched quality and precision, VTN Rotobec attachments will be an excellent choice to complete your demolition equipment needs.

Genesis Attachments announced major enhancements to its orange-peel type scrap grapples designed to reduce maintenance, improve durability, lower operating costs and enhance safety. Available in four models ranging in capacity from .75 to 1.5 cu. yds. (.6 to 1.3 cu m), Dan Raihala, Genesis design engineer, said customers can expect more productivity from this market-leading design. “We looked hard at our original design and listened to customer feedback to identify areas in which improvements could be made,” he said. “The first was in the area of maintenance. The new design features composite bearings with dust seals at all

For more information please contact:

rotobec@rotobec.com Visit our website at: www.rotobec.com

ROTOBEC INC.

ROTOBEC WEST

ROTOBEC USA INC.

HEAD OFFICE

WESTERN CANADA & WESTERN USA

EASTERN & CENTRAL

T. 418.383.3002 rotobec@rotobec.com

T. 250.765.1161 rotobec@rotobec.com

T. 603.444.2103 rotobec@rotobec.com

Snow Problem...

pivot points, leaving only the rotation bearing to grease. The heavy-duty cylinder guarding system, designed to protect the cylinders and internal components, is easily removed for maintenance.” Other changes Raihala cited include reverse-mounted cylinders to protect rods from damage, large-bore hydraulic cylinders to maximize clamping force, and long-life, abrasion-resistant steel tips that are easily replaced with a simple perimeter weld. “We also recognized that our customers want a choice in tines, and Genesis now offers the widest variety,” he said. “We provide flat bottom or pointed tine shapes and augment them with three spade types — half-, narrow- and widewidth — to meet specific application needs.” Additional GSG features include large-diameter hardened steel pins with integrated shear-proof retainers, high-torque 360 degree continuous rotation for better material access and placement, and an overall footprint designed to easily fit inside trailers. For more information, call 715/395-5252 or visit genesisattachments.com.

Parallel Lift Plow Is Latest Addition to Henke Lineup The latest snow fighting product from Henke Manufacturing is its parallel lift plow. Designed to remain parallel to the ground in transport or in angling positions, this plow can be completely removed from the truck hydraulically, leaving only a flat plate. The truck hitch and power reversing and lifting mechanisms remain with the plow. The parallel lift plow has an inverted “J” shape 43 in. (109 cm) high moldboard with 10 vertical ribs. The moldboard is available in steel or polymer in 10, 11 and 12 ft. (3, 3.5 and 3.6 m) lengths. Henke Manufacturing has more than 90 years experience in the design and manufacture of snow fighting equipment utilized in both the public and private sectors. Its Leavenworth, Kan., headquarters currently employs more than 90 people with 70,000 sq. ft. of manufacturing. Henke is a member of the Alamo Group Inc., headquartered in Seguin, Texas. For more information call 888/682-9010.

Page 30 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LiuGong Unveils 842 Tier IV Interim Z-Bar Wheel Loader LiuGong’s newest production class wheel loader is the first in LiuGong’s wheel loader line up to feature the EPA-compliant Tier IV Interim engine. LiuGong’s 842IV Z-bar has a 193 net peak hp (144kW) Cummins QSB6.7-C200 6cylindar, 4-cycle turbocharged, water-cooled diesel Tier IV interim engine. The ZF 4WG200 4/3 automatic shift transmission with a single stage, three element torque converter transfers that engine power to provide a breakout force of 30,574 lbs. Travel speeds for the 842IV Z-bar range from 26.2 mph (42 kmh) forward and 16.5 mph (26.5 kmh) in reverse. LiuGong’s 842IV Z-bar automatic boom kick-out / return-to-dig feature ensures fast cycle times for loading using the standard 3.5 cu. yd. (2.6 cu m) general purpose bucket with reversible cutting edge. An optional quick coupler accommodates included 60-in.

(152 cm) forks and a multi-purpose valve with auxiliary piping provides power to other wheel loader attachments. The Z-bar linkage configuration provides enhanced digging capacity. The 842IV static tipping load rating is 25,640 lbs. (11,634 kg) straight and 22,311 lbs. (10,120 kg) in a full turn. The 842IV’s Z-bar deluxe ROPS/FOPS climate controlled cab with heating and air-conditioning keeps the operator safe and comfortable with 3 in. seat belts, an adjustable suspension seat, back up alarm, rearview camera, rotating beacon and an AM/FM sound system with an MP3/USB interface. LiuGong’s standard ride control system and single lever pilot controls reduce operator fatigue and allow more efficient loading operations. Daily maintenance is simplified with an automatic, electrically raised engine hood. For more information, visit www.liugong.com.

LiuGong’s 842IV Z-bar has a 193 net peak hp (144kW) Cummins QSB6.7-C200 6-cylindar, 4-cycle turbocharged, water-cooled diesel Tier IV interim engine.

Major Wire Names Westate Machinery Clear Direction of New Screen Media Dealer in Northwest Taxes, Trade Policy Could Spur Growth

Montreal-based Major Wire Industries Limited has named Westate Machinery Company as its new screen media authorized dealer in Montana, eastern Idaho and parts of Wyoming. The dealership offers all of Major Wire’s screen media solutions, including the Flex-Mat 3 self-cleaning screen media in tensioned and modular versions and optimumwire woven wire. Westate has worked directly with aggregate and mining customers for more than 60 years, providing screen media and other crushing, screening and replacement part solutions. The dealership has built a reputation for supplying screen media with very short lead times. This is made possible because Westate keeps track of and stocks the screen media wire diameters and opening sizes its customers regularly use, according to the company. “Westate is an ideal fit for Major Wire’s product line because they understand how to prove the value of advanced screen media technology to their customers,” said Jean Leblond, Major Wire president. “Flex-Mat 3 tensioned and modular helps producers achieve higher throughput, increase screen capacity and production and eliminate common blinding and pegging problems. Combine that with Westate’s commitment to serve its customers with highquality solutions, and we have a very good team.” Major Wire’s advanced Flex-Mat 3 high-performance, self-cleaning screen media technology is available in a ten-

sioned version as an alternative to traditional woven wire and a modular version designed to replace polyurethane and rubber modular screen panels. Independently vibrating wires increase product throughput by up to 40 percent over traditional woven wire or polyurethane panels by increasing screening action and open area and eliminating blinding, pegging and clogging. Flex-Mat 3 panels provide up to 30 percent more screen capacity than woven wire and up to 50 percent more screen capacity than polyurethane and rubber panels, according to the manufacturer. Major Wire’s optimumwire woven wire has a unique chemical makeup that provides up to 40 percent longer wear life when compared to traditional woven wire of the same diameter. Delivering a combination of ductility, hardness and tensile strength, OptimumWire is less susceptible to breaking in high-impact conditions and with highly abrasive materials, so it lasts longer and minimizes labor, maintenance and lost production costs. “Our 60 years of screen media experience has taught us that a customer-driven approach is beneficial to both parties,” commented Josh Reno, Westate sales manager. “We try to be your partner in screening, unlike a lot of typical hands-off dealerships. We can identify your screen media options quickly over the phone or make a personal visit to determine a screening solution for you.” For more information, call 800/999-6676 or visit www.westate.com.

ECONOMY from page 1

in the U.S. to make that happen,” Rapp said. But Rapp added that the business community needs to hear more about the government’s plan for taxes, trade and key drivers like highway construction. Earlier May 19, Caterpillar said its April sales were up 66 percent over a year earlier. Overseas sales that drove that growth are a product of continuing urbanization in developing countries, Rapp said. Rapp added that while not many other companies in Illinois are publicly joining Peoria-based Caterpillar in its drive to push the state to lower worker’s compensation costs and other factors that make it more expensive to do business in the state, he believes the state’s businesses recognize the need for changers in Illinois and the country. Caterpillar CEO Douglas Oberhelman earlier this year complained to Gov. Pat Quinn about the cost of doing business in Illinois and said the company is regularly courted by other states. Oberhelman later said Caterpillar has no plans to move.

Trucks & Trailers

SECTION

Pages 31-34

Cat 775G Off-Road Truck Meets Tough Emissions Standards The Cat 775G off-highway truck sets new performance standards for the model while meeting U.S. EPA Tier IV final emissions standards. A combination of new drive train strategies and a five percent power increase over the previous model enable the 70-ton (63.5 t) payload class truck to hold a higher gear when climbing 10 percent grades in most applications. A number of new components and control changes boost efficiency. A key is the next generation of Cat transmission controls, named advanced productivity electronic control strategy. The system enhances productivity, fuel efficiency and drive train durability, and it enables enhanced machine control. For example, to balance fuel savings and production, two different economy shift mode selections enable the customer to tailor performance to the needs of the business, according to the manufacturer. Advanced control systems also integrate the optional engine compression brake with automatic retarder control to enable faster downhill travel and reduced cycle times â€• without increased fuel consumption. To meet Tier IV final emissions regulations in the United States, the Cat C27 ACERT engine includes the Cat NOx reduction system and diesel oxidation catalyst. Working in combination with ACERT technology, the Cat NOxreduction system continually diverts and cools a small volume of the engine exhaust gases, then returns the cooled gases to the combustion chamber. This process reduces cylinder temperatures and, consequently, lowers NOx formation. The no-maintenance diesel oxidation catalyst reduces

A combination of new drive train strategies and a five percent power increase over the previous model enable the 70-ton (63.5 t) payload class truck to hold a higher gear when climbing 10 percent grades in most applications.

certain hydrocarbons in the exhaust. The system requires the use of ultra low sulfur diesel fuel and does not use a diesel particulate filter. In the European Union and other areas, the 775G will be configured to meet EU Stage II emissions standards, which is the EU regulation applicable to the power output of the engine. The 775G engine produces net power of 779 hp (581 kW), and target gross weight of the truck is 246,500 lbs. (111,811 kg). As with the previous model, a number of different body options enable a customer to configure a truck to

achieve optimum capacity and durability. The 775G will replace the 775F when it goes into commercial production in the fourth quarter of 2011. Designs to Help Operators, Maintenance Techs The 775G also features a new cab and other changes to help the operator do the job safely and efficiently. The operator seat is in the center of the cab, which provides more space for the operator, and the cab has access and egress from either side. The access system is equipped with stairs illuminated by LED lights.

The new cab provides a 4 dbA reduction in noise experienced by the operator, which helps the operator fight fatigue over a long work period. The left window is electrically powered for convenience, and the cab heating and cooling feature automatic temperature control. An enhanced cab precleaner is available as an option to further increase air quality and extend the lives of HVAC components. For easy access by maintenance technicians, the 775G has a ground level electrical service center and diagnostics port on the front bumper. The Cat VIMS data

collection system now is standard equipment on the 775G. It allows the customer to access prognostic and diagnostic information. The optional VIMS service light on the front of the truck will indicate any machine event that affects performance. Fluid level indication and fluid fill ports are grouped for efficient service, and fluid filters are grouped. Filter service intervals for steering, hoist/brake and transmission/torque converter have been increased from 500 to 1,000 hours. For more information, visit www.cat.com.

Page 32 • June 18, 2011 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Kenworth Adds Front Frame Brackets for Winch Bumper Kenworth Truck Company will add durable, factoryinstalled, front frame brackets for easy winch bumper installation on Kenworth T270 and T370 trucks. The Kenworth front frame bracket package will provide strength for downward loads as great as 8,500 lbs. (3,855 kg) for a boom rest or cab guard, and up to 16,000 lbs. (7,257 kg) in the upward direction for outriggers. This frame package can help reduce customer upfit cost, and is compatible with popular bumpers used by winch customers. “Kenworth’s new front frame bracket package especially targets utility and municipal customers that choose to operate Kenworth medium duty winch trucks,” said Doug Powell, Kenworth medium duty marketing manager. “With this product addition, we’ve standardized and simplified the installation of specialty bumpers commonly used in the fire and emergency vehicle markets. This package will further enhance the value of our T270 and T370 4x4 models introduced in 2010.”

Kenworth will add durable, factory-installed, front frame brackets for easy winch bumper installation on Kenworth T270 and T370 trucks.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • June 18, 2011 • Page 33

Page 34 • June 18, 2011 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

2850 El Centro Road Sacramento, CA 95833 916-922-7181 800-227-3399 Fax: 916-922-4532

460 N. Danebo Ave. Eugene, OR 97402 541-484-5424 800-443-5452

1425 NE Columbia Blvd. Portland, OR 97211 503-289-1103 800-452-5346 Fax: 503-283-4549

3607 20th Street East Tacoma, WA 98424 253-922-8718 800-621-7636

19808 West Valley Highway Kent, WA 98032 800-523-4148 206-575-0140

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 35

CLASSIFIEDS

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

NH Construction Equipment New & Used Parts & Service

CRANES Crane Inspections Specializing in Truck Mounted Cranes

Modern Equipment Sales & Rental 800-445-4381

GENERATORS

Modern Equipment Sales & Rental 800/445-4381

Generators & Gen Sets

CRAWLER TRACTORS Crawler Tractor 2007 John Deere 450J, LGP, ROPS, hydro trans., 124'' 6way blade, very good condition, 1072 hours .................$57,375. 2005 John Deere 650J, LGP, ROPS, hydro trans., 128'' screen and sweeps, good condition, 1806................$57,800. Industrial Tractor Co. Inc. 843-572-0400

EXCAVATORS Hydraulic Excavators

For Sale or Rent All Makes and Models Modern Equipment Sales & Rental 800/445-4381

LANDSCAPE EQUIP. Misc. Landscape Equip. Gehl Skid Steer Loaders, Excavators, Track Loaders, Attachments! Rent or Purchase Norris Sales Company 610/279-5777

Track Loaders

PARTS

Backhoe Loaders

Crane Parts

2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24'' bucket, very good condition, 71 hours...........................$58,635. 2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24'' BH bucket, very good condition, 55 hours...........................$57,200. 2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24'' BH bucket, excellent condition, 38 hours. ....................................$73,700. 2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24'' BH bucket, excellent condition, 384 hours...........$57,300. 2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24'' BH bucket, good condition, 2862 hours.................. $3 9 ,5 00 .

TEREX PARTS

Industrial Tractor Co. Inc. 843-572-0400

Stone, Wacker, Honda, Gehl, JLG to name a few ..... Norris Sales Company 610/279-5777 Stone, Wacker, MBW, Diamond Products, Honda, IR, AGL, Sky Trak, JLG, JoBox, DeWalt, Stihl, Imer

Modern Equipment Sales & Rental 800/445-4381

RENTALS

Rentals, Sales, Service

Rental Construction & Industrial Equipment Rentals

Mon-Fri 6:30 am - 5:00 pm Sat 7:00 am - 12:30 pm

Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping

Norris Sales Company 610/279-5777

TRAINING

Construction & Equpment & Supplies for the "Professionals"

Operator Training

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

TRUCKS

Daily - Weekly - Monthly & Long Term Rentals Available

Bucket Trucks ELLIOTT BUCKET TRUCKS Modern Equipment Sales & Rental 800/445-4381

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

Classified...2 Insertions...95¢ Per Word Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

One Word HEADING (Category to place listing):

Each

Block The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

Classified Rates: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction equipment Guide. CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________

The 2011 EZ-Screen 1200XL, with a 5'x6' screen box, and a patented non-hydraulic screen drive. The EZ 1200XL works with a 1/2 to 2 yard loader. Now with a 25-hp KOHLER Diesel Engine.............................. .....................................................$39,500 plus freight Other Screens Available 13 EB www.ez-screen.com • 866/745-5828

STREET______________________________________________________________________PHONE NO. _________________________________________________ CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________ Check Enclosed

VISA

MASTERCARD

AMERICAN EXPRESS EXP. DATE

CARD NUMBER

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE 1-800/523-2200 FAX 215/885-2910 470 Maryland Drive • Fort Washington, PA 19034 Email: sales@cegltd.com

ASPHALT CUTTERS EXTREME SERVICE, Large Overseas Order 10 Extra Units, Retails $3,100

Blowout Special: $2,000 Call Dawn or Gerry at 218-863-6444 13-14 AP

1996 Komatsu WA320-1, 3.25 yd GP Bkt, 7800 Hrs, 20.5x25 Tires (70% Front, 50% Rear), Good Condition, 3rd Valve, Aux Hydraulics Email: nir@abclockntow.com Call: Oscar for Details: 702-303-4360 13-14 DA

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (Only one machine per Bargain Ad) and a maximum 17 word description plus contact and phone number. • Send Check for $95 with copy to: Construction Equipment Guide 470 Maryland Drive Fort Washington, PA 19034 • The ad will run for two consecutive issues.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Western States. For more information, call Construction Equipment Guide today at

800/523-2200

Page 36 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. CATERPILLAR D400E OFF ROAD TRUCKS • (5 ) 1996-1999 D400E TRUCKS SERIES L WILL CONSIDER SERIES LL CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– ALL THE TIME BULLDOZER D6H D7G D8K D8N 155 355 375 ENC CAB WITH RIPPER USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– 3RD MEMBER OR ENTIRE REAREND FOR CMI RS425 ROAD RECLAIMER CONTACT: CANDACE HINTON PINTO CONSTRUCTION PHONE: 936-569-6155 FAX: 936-569-6334 EMAIL: CHINTON0810@YAHOO.COM –––––––––––––––––––––––––––––––– CARRIER ASSY PART# 23B1500242 • CARRIER ASSY FOR A KOMATSU GD611A-1 S/N10603 CONTACT: CARGO AWAY CORP PHONE: 786-287-7056 FAX: 305-573-7038 EMAIL: CARGOAWAYCORP@LIVE.COM –––––––––––––––––––––––––––––––– KOMATSU WHEEL LOADER WA6003 • MACHINES MUST B LOW HOUR , ORIGINAL PAINT , MULTIPLE UNITS WHOLE SALE PRICE REQUIRED. CONTACT: RASHID MAHMOOD PHONE: +97150 2663939 FAX: +9716 5350006 EMAIL: RASHID@ALRAAS.COM –––––––––––––––––––––––––––––––– CASE OR CAT SKIDSTEER • I WOULD LIKE TO BUY A CASE OR CAT SKIDSTEER ON CONTRACT.BANKS ARE NOT AS FRIENDLY TO SMALL BUISNESS OWNERS ANY LONGER.I MUST HAVE A LOW HOUR MACHINE AND LARGE SIZE-90XT-OR-450 AND OR CAT 297 OR 299. CONTACT: JOHN VOSS PHONE: 641-660-1664 EMAIL: JOHN.VOSS@MCHSI.COM –––––––––––––––––––––––––––––––– KOMATSU DOZER • WANTED KOMATSU D41 D53 D58 BULDOZER CONTACT: IJAZ AHMED PHONE: 0019165507009 EMAIL: TPPDEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– HITACHI EXCAVATORS • UHO83 HITACHI EXC.WANTED MULTIPLE UNITS WHOLESALE PRICES PLEASE ...WILL CONSIDER ALL OFFERS AND MACHINES ... CONTACT: DALE PHONE: 360-551-9778 FAX: 360-895 3478 EMAIL: DALE.HEAVYEQUIPMENT HUNTERS@GMAIL.COM –––––––––––––––––––––––––––––––– VERMEER GRINDER • I AM LOOKING FOR A VERMEER GRINDER HG200 AND A TMR ANIMAL FEED MIXER CONTACT: KURT HORVATH PHONE: 847 344 4114

FAX: 847 391 9267 EMAIL: GREENROOFER@ INTRINSICLANDSCAPING.COM –––––––––––––––––––––––––––––––– HYDRAULIC EXCAVATOR • LOOKING FOR PC400-6 , PC400-7, ORIGINAL PAINT, NICE UNITS CONTACT: RASHIDMAHMOOD PHONE: +97150 2663939 FAX: +9716 5350006 EMAIL: RASHID@ALRAAS.COM –––––––––––––––––––––––––––––––– CF (WOODS) MANUAL QUICK COUPLER • COUPLER TO FIT CASE 9030B/CX210 EXCAVATOR 80MM PINS 17 3/4-18 INCH CENTER TO CENTER CONTACT: TOM SCHIMELFENIG PHONE: 701-984-2522 FAX: 701-984-2523 EMAIL: TOMPEGGY@DAKTEL.COM –––––––––––––––––––––––––––––––– CASE 521D WHEEL LOADER | CONTACT: FRANK HORAN @ TRICO EQUIPMENT PHONE: 800-654-USED (8733) EXT. 1230 FAX: 856-697-4842 EMAIL: FHORAN@TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– TIMBERJACK SKIDDER 460 • WANTED TO BUY, USED/AUCTION TIMBERJACK SKIDDER WITH WINCH. NOT INTERESTED IN THE GRAPPLE. CONTACT: AGNES PHONE: +233243682595 FAX: +2330302776244 EMAIL: ANAIS_ABABIO@YAHOO.COM –––––––––––––––––––––––––––––––– BACKHOE RIMS • JD PART#AT169550 RIMS TO FIT A 12.5/80-18 TIRE OFF A 310 OR 315SE BACKHOE CONTACT: DICK BOHN PHONE: 715-472-2263 EMAIL: BABY33@LAKELAND.WS –––––––––––––––––––––––––––––––– SET OF FORKS FOR A DRESSER 520C CONTACT: EUGENE ZEMPEL PHONE: 507-828-3390 FAX: 507-249-3060 EMAIL: ZEMPELE@HOTMAIL.COM –––––––––––––––––––––––––––––––– NEED TO BUY D7G D8 D9 D10 WITH RIPPER I-I PREFERABLE CONTRACTORS PLEASE CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– NEED CUMMINS QSX15 ENGINES ANY CONDITION CONSIDERED CONTACT: HOWARD PHONE: 312-368-7997 FAX: 312-368-9419 EMAIL: HOWARD@DIESELSALES.COM –––––––––––––––––––––––––––––––– MANITOU 3 TO 5 TON TELESCOPIC FORKLIFTS • WE ARE INTERESTED TO BUY MANITOU FORKLIFTS ONLY FROM USA/CANADA WHOLESALERS/CONTRACTORS. WHOLESALE PRICES ONLY. CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM ––––––––––––––––––––––––––––––––

JAW CRUSHER 2003NEWER • WE ARE TRYING TO LOCATE JAW CRUSHER EITHER IN TEXAS OR NEAR TEXAS CONTACT: BARBARA PHONE: 903-509-2307 FAX: 903-561-3917 EMAIL: BDC1950@MSN.COM –––––––––––––––––––––––––––––––– JCB 5508, 550 (140170) | WE URGENTLY WANT TO BUY FROM USA CONTRACTORS/DEALER WHOLESALERS. CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– CF (WOODS) QUICK COUPLER | MUST HAVE 80 MM PINS 12-12 1/4 BETWEEN EARS CAN BE BETWEEN 17 3/4 AND 18 INCHES CENTER TO CENTER OF PINS CONTACT: TOM SCHIMELFENIG PHONE: 701.984.2522 FAX: 701.984.2523 EMAIL: TOMPEGGY@DAKTEL.COM –––––––––––––––––––––––––––––––– ANY CONDITION-NEEDED FOR PARTS NPK E 218 HYDRAULIC HAMMER CONTACT: PHIL PHONE: 413-427-7171 EMAIL: PHILG123@COMCAST.NET –––––––––––––––––––––––––––––––– HITACHI ZX 270 | 2004-2006 YEAR, CLEAN WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– 4X4 SINGLE AXLE CAB CHAS | LIKE A INTERNATIONAL 4300 DT466 WILL LENGTH TO FIT CONTACT: RALPH PHONE: 580-591-3922 FAX: 580-536-2355 EMAIL: RDICKSON2@GMAIL.COM –––––––––––––––––––––––––––––––– TIRE HANDLER | TIRE HANDLER FOR 773 & 637 TIRES CONTACT: TOM WEAVER PHONE: 540-389-7002 FAX: 540-389-7072 EMAIL: TWEAVER@PARADIGMINTL.COM –––––––––––––––––––––––––––––––– INSULATION BLOWER USED GOOD QUALITY | ALSO NEED 7X12 CARGO TRAILER FOR INSULATION BLOWER CONTACT: TONY PHONE: 727-459-3935 EMAIL: TONYSABELLICHI@YAHOO.COM –––––––––––––––––––––––––––––––– NEED TO BUY BULLDOZER SPECIALITE D8 WITH RIPPER 1977 AT 2011 CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CF PINGRABBER QUICK COUPLER | MUST HAVE 80 MM PINS APPROX. 17 3/4 CENTER TO CENTER 12 INCHES BETWEEN EARS PREFER MECHANICAL BUT WILL CONSIDER HYDRAULIC CONTACT: TOM SCHIMELFENIG PHONE: 701-984-2522 FAX: 701-984-2523 EMAIL: TOMPEGGY@DAKTEL.COM –––––––––––––––––––––––––––––––– BULLDOZER D7G AND D7H WITH

RIPPER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– WILLARD | KOMATSU EXCAVATOR, 50,000 APPROX WEIGHT. $50,000 OR UNDER. WITH HEAT/AIR/THUMB. CONTACT: FROM MISSOURI PHONE: 660-484-3522 OR 660-542-4454 FAX: 660-484-3722 EMAIL: WKWOOD@GREENHILLS.NET –––––––––––––––––––––––––––––––– TRIPLE L TRAILER | TRAILER THAT THE DECK LOWERS TO THE GROUND PREFERABLY A 7612 DROP DECK SCISSOR LIFT TRAILER CONTACT: DAN MCKINNEY EMAIL: DANO@COOPSONE.COM –––––––––––––––––––––––––––––––– RUBER TIRE TRACTOR BACKHOE | JD OR CASE GOOD SHAPE 10 TO 12 REACH CONTACT: RICH PHONE: 507-847-3266 507-840-0838 EMAIL: RICHLIN507@MSN.COM –––––––––––––––––––––––––––––––– CRAWLER CRANE | WANT TO BUY. AMERICAN 9310 CRAWLER. CONTACT: DON AUSTIN PHONE: 512-750-9742 FAX: 512-301-0163 EMAIL: MACHINERYPICTURE@YAHOO.COM –––––––––––––––––––––––––––––––– CATERPILLAR 980G | YEAR 2000 +/CLEAN WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– JCB 550, 550140, 550170,1998, 2007 | WE ALWAYS BUY THESE UNITS. PLEASE SEND IF YOU HAVE. THANKS CONTACT: MARK EMAIL: VANSEQUIP@GMAIL.COM –––––––––––––––––––––––––––––––– 5000 POUND FORKLIFT/AIR TIRES | LOOKING FOR AN OFF SOLID SURFACE TIRED 5000 POUND FORKLIFT. PREFER GAS ENGINE CONTACT: JOE HOTZE PHONE: 618-548-1711 FAX: 618-548-6753 EMAIL: JOEHOTZE@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED TO BUY JCB TELEHANDLERS & CATERPILLAR WHEELLOADERS | OFFER ME THE FOLLOWING EQUIPMENTS.JCB TELEHANDLERS 550140/170.CATERPILLAR WHEEL LOADERS 950B,950E,966D,966E.966F. CONTACT: HIDAYAT KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED TO BUY HITACHI EXCAVATORS EX200,UH083,UH077 | OFFER ME THE FOLLOWING HITACHI EXCAVATORS EX200-1,EX200LC-1,UH083,UH077. CONTACT: NAQIB KHAN PHONE: +92-333-3298751

EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– 1986 1990 KAWASAKI WHEEL LOADERS | LOOKING TO PURCHASE ANY KAWASAKI WHEEL LOADER RANGING YEAR 1986 - 1990. CONTACT: ALI HUSSAIN PHONE: 314-537-2809 EMAIL: ABUMUJTABA1963@ YAHOO.COM –––––––––––––––––––––––––––––––– CAB FOR CAT 420D | OPEN ROPS CAB FOR CAT 420D CONTACT: JENNIFER PHONE: 256-533-1100 FAX: 256-533-1191 EMAIL: JENNIFER@ DONKENNEDYANDSONS.COM –––––––––––––––––––––––––––––––– MT6642, MLT627 | WE ARE INTERESTED TO BUY URGENTLY THESE UNITS AT COMPETITIVE PRICES.THANKS CONTACT: AYYAZ ALLAM EMAIL: AUTOLINKINTERNATIONAL@ GMAIL.COM –––––––––––––––––––––––––––––––– JRB STYLE QUICK COUPLER TO FIT 544E LOADER | LOOKING FOR A COMPLETE HYDRAULIC QUICK COUPLER TO RETRO FIT ON A JD 544-E LOADER. USED IS PREFFERED CONTACT: JOHN NYE EMAIL: NYEPARENTS@YAHOO.COM –––––––––––––––––––––––––––––––– JCB550 OR 550140 (1997-2003), SAKAI T2, BOMAG 161 & 165 AD | WE NEED THE ABOVE MENTION EQUIPMENT ONLY FROM USA-CANADA-JAPAN & EUROPE.THANKS CONTACT: AYYAZ ALLAM EMAIL: AUTOLINKPK@GMAIL.COM –––––––––––––––––––––––––––––––– HORIZONTAL BORING MACHINE CONTACT: MARSHALL CONSTRUCTION CO. INC. PHONE: (434) 793-2715 FAX: (434) 793-2803 EMAIL: TPRESSLEY62@YAHOO.COM –––––––––––––––––––––––––––––––– USED #325 CAT DOORS, RIGHT HAND DOOR PART # 1776075; LEFT HAND DOOR PART # 1849022. DOORS NEED TO HAVE DECALS. CONTACT: MEMPHIS WRECKING COMPANY PHONE: 901-774-4011 FAX: 901-946-9793 EMAIL: MEMWRECK@AOL.COM –––––––––––––––––––––––––––––––– SEND US A QUOTE, CATALOGUE AND NECESSARY DETAIL FOR THE SUPPLY OF THE BELOW MENTIONED. 1. PEDESTRIAN TRENCHER - EQUIVALENT TO DITCH WITCH RT-24 WALK-BEHIND TRENCHER PRODUCT NEEDS A 36" BOOM AND A 100% BOLT-ON SHARKTOOTH CHAIN AND TRENCH CLEANER 2. TRAILER - EQUIVALENT TO DITCH WITCH TRAILER S1-A. CONTACT: PRASHANTH PHONE: 00968-92807072 FAX: 00968-23279065 EMAIL: ABUGHAZLAN@YAHOO.COM –––––––––––––––––––––––––––––––– SOLAR 130(EXCAVTORS)19905 • WE

ARE INTRESTED IN BUYING SOLAR 130(WHEEL EXCAVATORS)1990-5 FROM SOUTH KOREA AND ALSO INTRESTED USED MOTOR GRADER CONTACT: AGHA WAQAR ALI KHAN PHONE: 92-300-4642935 FAX: 92-42-35942188 EMAIL: BDIL6@YAHOO.COM –––––––––––––––––––––––––––––––– KOMATSU MODEL PC20-7 SER#38938 CONTACT: F.MULTARI FAX: 845-586-3854 EMAIL: CAROL.MULTARI@YAHOO.COM –––––––––––––––––––––––––––––––– NEED TO BUY FROM USER D6H D6R D7G D7H D8K D8N WITH RIPPER OR WINCH USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– NEED HITACHI EXCAVATOR EX200,EX200LC • WE NEED HITACHI EXCAVATORS EX200, EX200LC, YEARS FROM 1987 TO 1990, OFFER ME. CONTACT: NAQIB KHAN PHONE: +92-345-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– CAT IT QUICK COUPLERS CONTACT: EVIE PHONE: 603-899-2000 FAX: 603-899-2006 EMAIL: EVIE@202TRUCK.COM –––––––––––––––––––––––––––––––– BOBCAT SKID LOADER INQUIRY | WE ARE LOOKING FOR BOBCAT S130. WE WANT TO BUY 4 UNIT SKID LOADER. CONTACT: MAX PHONE: +886 2 22767678 FAX: +886 2 22767679 EMAIL: MAXMOUT@CATLON.COM.TW –––––––––––––––––––––––––––––––– EXCAVATORS • DEERE/HITACHI 650DLC [17FT ARM] OR KOMATSU PC750-7 [18 FT ARM] WITH LOW HOURS. CONTACT: DALE WITCHER PHONE: 803 376 6040 EMAIL: DWITCHER@SC.RR.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 TRACK JAW | 3 UNITS GOOD CONDITION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– KOMATSU TRACK EXCAVATOR | 19972002 KOMATSU PC300LC-6 & PC400LC6: (12,000 HRS WORKING OR LESS) (KOMATSU ENGINE, ORIGINAL PAINT, ORIGINAL PUMP) MACHINE HAS TO BE WHOLE SALE PRICE AND COME FROM CONTRACTOR OR END USERS. CONTACT: DAVID | PHONE: 626-417-9808 | EMAIL: VPINTERNATIONALTRADINGCO@GMAIL.COM –––––––––––––––––––––––––––––––– NEED TO BUY FROM USER BULLDOZER D3 A D10 CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 37

HEAVY HEAV Y EEQUIPMENT QUIPMENT & COMMERCIAL COMMERCIAL TRUCK TRUCK

PUBLIC AUCTION

2002 C CATERPILLAR ATERPILLAR 330CL 330CL EXCAVATOR EXCA AVATOR

1997 19 97 CATERPILLAR CATERPILLAR 140H 140H MOTOR MOTOR GRADER GRADER

SAN BERNARD SAN BBERNARDINO EERNA ERN ERNARD RRNA NAARD ARDIN RDDI DINO INO NO, CA CALIFORNIA ALIF A LI I IFORN F FOR FORN O ORNIA RN N NI I IA A TH SA ATURDA AY, JUNE 25 - 8:30AM

175 W WEST EST CENTRAL CENTRAL AVE., AVE., SAN SAN BERNARDINO, BERNARDINO, CA CA 92408 92408 INSPECTION: JUNE 23RD, 24TH - 8AM TO 5PM

VISIT OUR WEBSITE FOR CURRENT LISTINGS N

ADVANCE NOTICE

SA ATURDA TU URDA AY, JULLYY 9TH - 8:30AM

47 51 P O W E R I N N R O A D SACRAMENTO CALIFORNIA 95826

909.383.5500

Developers Pitch Arena Complex Plans to Nevada Lawmakers By Michelle Rindels CARSON CITY, Nev. (AP) Developers are making a last-minute pitch to lawmakers for authority to create elaborate arena and event complexes they say will transform Nevada city centers. Senate Revenue and Assembly Taxation committees June 2 considered a bill authorizing Clark and Washoe counties to establish special taxing districts to fund one proposed project. “This is one of the more exciting opportunities this session. We’re giving communities in Clark County the opportunity to create jobs in the short and long term,” said Senate Majority Leader Steven Horsford, DLas Vegas. Three plans are in play for Las Vegas and the ultimate decision on which one to back would be up to local jurisdictions. One proposal seeks to create a stadium at University of Nevada, Las Vegas surrounded by a shopping center and housing. Proponents said it would reinvent the commuter culture on campus and forge a bond between the school and its students.

A second plan promoted by International Development Management CEO Chris Milam seeks to create a privately-owned Las Vegas National Sports Center that could accommodate major league soccer and hockey and minor league baseball. The complex includes an arena, a ballpark and a stadium and would be located on the west side of I-15 behind Mandalay Bay. A third plan co-sponsored by the city of Las Vegas and developer Cordish Company creates an events center connecting Symphony Park and downtown Las Vegas. Proponents of all three projects urged lawmakers to pass the bill as a way to create construction jobs and stimulate the Las Vegas economy. SB501 was introduced late May 30 by the Senate Finance Committee in a hastily called meeting on the floor. Assemblywoman Marilyn Kirkpatrick, chairwoman of the Assembly Taxation Committee, had a litany of questions for project proponents and said she wanted to hear the nuts and bolts of the financing proposal during hearings scheduled over the next few days. Her committee heard the bill the morning of June 3.

***** 4 AUCTIONS IN ONE DAY! 4 ***** SECURED PARTY CRANE AUCTION & ***** 4 Large Job Completion Auctions 4 ***** AllGood Contracting, Jimerson Underground Deanco Construction Total Site Contracting

TUESDAY, JUNE 21 @ 10:00 AM HOUSTON, TX NOTE: Selling in this sale will be late model cranes from one secured party and 4 major job completions from AllGood Contracting, Jimerson Underground , Deanco Construction & Total Site Contracting. HILITES INCLUDE: 4 CRANES: Grove GMK 5150B (150T), P&H T900XL (90T), Terex T560 (60T.), Galion (15T), 9 ARTICULATED HAUL TRUCKS: (5) 2008 Cat 725, Cat 730, Terex TA30, Terex TA25, Volvo A25C, 4 SOIL STABILIZERS: 2004 Terex RD425B, (3) Raygo Gators, 31 HYDRAULIC EXCAVATORS: (2) 2007-(2) 2004-2003-2002 Komatsu PC300LC-8, 2006 Komatsu PC220LC-7, Komatsu PC220LC-6L, Komatsu PC220LC-5L, 2007-(2) 2006-2005 Komatsu PC78MR-6, Kobelco SK300LC-II, Kobelco SK300LC, Kobelco SK200LC, Cat 330L, Cat 225BLC, (2) JCB JS330LC, 2002 JCB 260LC, JCB 260LC, 2004 JD 200CLC, 2006 JD 160LC, 2003 Volvo EC330BLC, Case 9010B, 5 MOTOR GRADERS: Cat 140HVHP, Cat 120G, Cat 12G, JD 770B, Fiat Allis FG65C, 7 AGRICULTURAL TRACTORS: 2006 Case STX430S (4x4), 2003 NH TJ450 (4x4), (2) NH 8970 (4x4), Case/IH STX325 (4x4), Massey Freguson 253, Massey Ferguson 20G, 7 PULL BEHIND SCRAPERS: (2) 2006 Reynolds 17CS12, (3) Reynolds 18CMX, Reynolds 14C, Cepco CP14, TOOL CARRIERS: 2003 Cat IT38G-II, 20 RUBBER TIRED LOADERS: 2004-(2) 2003 Komatsu WA320-3, 2004 Komatsu WA250-5L, (2) Komatsu WA250-3MC, Komatsu WA180-3P5, (2) Komatsu WA100, Cat 950F-II, Cat 950G, (2) Cat 950, Cat 936, Cat 930, (2) Cat 928F, Kobelco LK550-II, 2003 Case 721C, TCM 850, 26 CRAWLER TRACTORS: Cat D6RLGP, Cat D4CXL, (2) Komatsu D65PX-12, 2007-(4) 2005-2004-(3) 2003 Komatsu D61PX-15, Komatsu D41P, 2005 Komatsu D39PX-1, (2) Komatsu D31PX-21, Dresser TD8G, Dresser TD7, JD 850CLT (ripper, 6 way blade), 2004 JD 650H, 2004 JD 550HLGP, 2004 Case 1850KXLT (winch), 2002 Case 750H, Case 750H, 2009 Nortrac NB3500C, CRAWLER LOADERS: 2002 Cat 963C, 19 TRACTOR LOADER BACKHOES: 2008 JD 410J (4X4), 2008 JD 310 SJ (4x4), (2) 2008 JD 310J (4X4), (3) 2005-(6) 2004 JD 310G (4x4), JD 310D (4x4), (5) JCB 214S, ASPHALT PAVERS: Barber Greene SB131, 15 VIBRATORY ROLLERS: 2006 JCB Vibromax VM115PD, IR SD105, IR SD100D, 2004 IR SD77F, IR SD40F, Raygo 320A, Dynapac CA25, Dynapac CA251D, Rammax P54K2B 54in. PD, Hypac C822, Dresser PD784, Champion 540C, Stone SD54, 11 RUBBER TRACKED SKID STEERS: (3) 2007-2006 JCB 180T, (2) 2007 JCB 180T (Parts), (5) 2005 Bobcat T190, 2 SKID STEERS: Bobcat S250, 2005 Cat 226B, TRENCHERS: 2005 Ditch Witch RT40, 2 TELESCOPIC FORKLIFTS: Lull 844C-42, JCB 506B, FORKLIFTS: 2004 Hyster S120XMS, 4 BOOM LIFTS: (2) 2007 JLG 600S (4X4), (2) 2007 JLG 450AJ (4X4), SCISSOR LIFTS: Skyjack SJ9250, 3 AIR COMPRESSORS: (2) IR 185CFM, IR 175CFM, 4 GENERATORS: (2) Demo Cat 500kw, (2) New Makita G12010R 12,000 watts, DROP HAMMERS: Broderson MH42B, 3 LIGHT PLANTS: 2005 Magnum MLT4060, Coleman, Allmand LT103, WATER PUMPS: Gorman Rupp 6in. Portable, 7 SWEEPERS: Allmand Maxisweep, (2) Waldon F033, Waldon F026, Waldon F021, (2) Waldon Sweepster B Series, FLATBED TRUCKS: 2003 Ford F550XL (s/a), ROLLOFF TRUCKS: 2002 Mack (t/a), 2 DUMP TRUCKS:1998 Mack (t/a), 1998 GMC C7500 (s/a), 5 WATER TRUCKS: (2) 2003 Freightliner (s/a), 1981 Ford (s/a), 1978-1977 Mack R685 (t/a), 4 TRUCK TRACTORS: 2007 Peterbilt 359 (t/a), 2007 Peterbilt 359 (t/a), 2007 Freightliner D120064DT (tri.), 2006 Int’l. 7600 (6x4, tri.), 2 PICKUPS: 2004 Ford F250XLT, 2002 Ford F250XLT, BUSES: 1996 Ford E350, AUTOMOBILES: Lincoln Towncar Stretch Limo, 4 DETACHABLE GOOSENECKS: (3) 2011 Witzco 50T (tri.), 2004 Fontaine TA51H (tri.), STEP DECK TRAILERS: Trailmobile (t/a), 2 BELLY DUMP TRAILERS: 2007 Lufkin 26ton (t/a), 2007 CTS 26ton (t/a), 3 PUP TRAILERS: 19971995-1994 Clement 2ATT121OL (t/a), UTILITY BODIES: Knapheide 11ft. Utility Body, ATTACHMENTS: Skid Steers: New 2010 Super Cut Asphalt Cutters, Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Versatech Hay Spears, Root & Grapple Buckets, Frames, Stump Buckets, Quick Attach Plates, Snow & Mulch Buckets, New 2010 Super Cut Asphalt Cutters, Excavators: 3500-4800-5600 Thumbs, SURVEY EQUIPMENT: David White 2110 Laser Level, Leica Wild Model LNA2 Laser Level, Laser Reference Model L2 Laser Level, Nikon Model AP-7 28X Auto Level, Geotop Model G20B 20Z Level, Geotop GT-3 Builder’s Transit, SUPPORT EQUIPMENT: Simer 3/4in. Small Roofers Pump, Robin RGV6101 Generator, GX240 Water Pump, New Mustang Plate Compactors, New Mustang Concrete Vibrators, New Mustang Submersible Pumps, New Abrasive & Diamond Blades, New Stiff neck Pintle Hitches, New Air Spray Guns, New Ratchet Cargo Straps, New Impact Wrenches, Air Spray Guns, New Huskie Hammer Drill, New Jack hammer Hose, New Impact Wrenches, New Water Hose., Pintle Hitches, Ratchet Straps, Diamond Blades, Submersible Pumps, Concrete Vibrator, Impact Wrenches, Water Hoses, Air Spray Gun Kit, Water Pump, Mustang Rammer, Jack Hammer Air Hose, Hammer Drill, Hose Reels, Scaffolding, Porta Powers, Straps, Bottle Jacks, Battery Charger, Winches, Socket, Hose Reel, Booster Packs, Weedeater, Chainsaws, Vise, Sandblaster, Drill Press, Tri-Ball, Post Hole Digger, Cherry Picker, Wagon, Trailer Jacks. TEXAS AUCTION LICENSE: AUCTIONEER #16356 Michael W. Powers SALE SITE PHONE: (863) 660-3613

online bidding available: www.lyonauction.com DIRECTIONS: From Bush International Airport: Airport exit on JFK Blvd., take left ramp onto Will Clayton Parkway toward Central Cargo .2 miles. Continue on Jetero Blvd., continue on McKaughan Rd., left on Viscount Rd., left Mecom Rd. Take ramp onto JFK Blvd. toward Airport exit (I-45)/ Beltway 8/ Hardy Toll Rd. 2 miles. Take ramp onto Hardy Toll W toward Hardy Toll Rd. (tolls) for 2.9 miles. Take Hardy Toll Rd. North/ Woodlands exit onto Hardy Toll N (tolls) – 11.9 miles. Merge onto I45 N for 8.4 miles. Exit #81/ Magnolia (FM-1488) toward Magnolia (I-45 S)/ Hempstead .3 miles. Take ramp onto I45 S .2 miles, take ramp onto FM 1488 Rd. (FM-1488) toward I-45 N/ Sherbrook Dr. .3 miles. Take ramp onto North Fwy toward I-45 N .2 miles. Take ramp onto FM 1488 Rd. (FM-1488) toward Magnolia (I-45S) Hempstead for 8 miles. Site is on left. Address: 8215 FM 1488, Magnolia, TX 77354.

ALEX LYON & SON Sales Managers & Auctioneers, Inc. Bridgeport, NY Phone: 315/633-2944 Fax: 315/633-8010 www.lyonauction.com

Page 38 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com • Houston, TX Wed., June 21, 2011 For: Large Job Completion Auction of Construction Equipment • Racine, WI Wed., June 22, 2011 For: Construction Equipment, Trucks and Trailers • Queratero, Mexico Fri., June 24, 2011 For: Late Model Construction Equipment, Attachments, Trucks and Trailers • Buffalo, NY Sat., June 25, 2011 For: Late Model Rental Returns of Primarily New Holland, Construction Equipment, Attachments, Trucks & Trailers • San Bernardino, CA Sat., June 25, 2011 For: Construction, Support Equipment, Aerial, Forklifts, Trucks & Trailers • St. Louis, MO Wed., June 29, 2011 For: The CAT Classic of the Year! Rental Fleet of Fabick Tractor • Bangor, ME Fri., July 8, 2011 For: Construction, Support Equipment, Trucks and Trailers • Rochester, NY Sat., July 9, 2011 For: Late Model Dump Trucks, Truck Tractors, Equipment Trailers, Construction Equipment, Aerials & Forklifts • Syracuse, NY Fri., July 15, 2011 For: Amazing Classic Car Auction – Creampuff Corvettes and more! • Canastota, NY Sat., July 16, 2011 For: Lyon’s Annual Summer Hay Camp & Friday Night BBQ. Late Model Construction, Support, Aerial Lifts, Trucks and Trailers • San Bernardino, CA Thurs., June 21, 2011 For: Late Model Construction Equipment, Aerials, Trucks and Trailers • Belpre, OH Fri., July 22, 2011 For: Complete Liquidation of Pipeline Contracting Company • Dallas, TX Tues., July 26, 2011 For: Late Model Rental Fleet Construction, Support, Attachments, Trucks and Trailers • Albany, NY Fri., July 29, 2011 For: Construction, Attachments, Support, Tools, Trucks & Trailers • Tuscaloosa, AL Fri., August 5, 2011 For: Complete Dum Trucks & Truck Tractor Liquidation plus Logging Equipment • Detroit, MI Sat., August 7, 2011

For: Construction and Ag Equipment, Support and Vehicles • Lexington, KY Sat., August 13, 2011 For: Corvette Extravaganza! Over 55 Corvettes! • Kissimmee, FL Tues., August 16, 2011 For: Construction, Support, Rental Fleet Equipment, Attachments, Trucks and Trailers • South Bend, IN Fri., September 23, 2011 For: 2 Auctions in 1 Day! Construction Equipment, Trucks & Trailers • Ledyard, CT (Foxwood Casino) DATE TBA For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Houston, TX June 22-23, 2011 • Columbus, OH June 23, 2011 • Albuquerque, NM June 24, 2011 • Bellevue, IA June 24, 2011 • Pittsburgh, PA June 27, 2011 • Phoenix, AZ June 28, 2011 • Detroit, MI June 28, 2011 • Jackson, MS June 29, 2011 • Salt Lake City, UT June 29, 2011 • Statesville, NC June 30, 2011 • St. Louis, MO June 30, 2011 • Spokane, WA June 30, 2011 • New Orleans, LA July 15, 2011 • Frederick, MD July 19, 2011 • Los Angeles, CA July 22, 2011 • Sacramento, CA July 26, 2011 • Fort Worth, TX July 27-28, 2011 • Hartford, CT July 28, 2011 C ANADA • London, ON June 21, 2011 • Saskatoon, SK June 23, 2011 • Toronto, ON June 28, 2011 • Grand Prairie, AB June 29, 2011 • Truro, NS July 7, 2011 • Montreal, QC July 12, 2011 • Regina, SK July 13, 2011

Coming Auctions • Chilliwack, BC July 20, 2011 • Prince George, BC July 27, 2011 • Glassville, NB July 28, 2011

For: Construction Equipment • San Bernardino, CA Fri., December 16, 2011 For: Construction Equipment

INTERNATIONAL • Brisbane, Australia June 21, 2011 • Geelong, Australia June 23, 2011 • Moerdijk, Netherlands June 23-24, 2011 • Moncofa, Spain June 30 – Jul 1, 2011 • St. Aubin Sur Gaillon, France July 5, 2011 • Cancun, Mexico July 7, 2011 • Caorso, Italy July 14, 2011 • Dubai, UAE July 19-20, 2011 • Torreon, Mexico August 10, 2011

CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • Denver, CO Tues., June 21, 2011 For: Construction Equipment • Ocala, FL Tues., June 28, 2011 For: Construction Equipment • Farmington, NM Tues., July 12, 2011 For: Construction Equipment • Los Angeles, CA Wed., July 20, 2011 For: Construction Equipment • Omaha, NE Wed., July 27, 2011 For: Construction Equipment • Seattle, WA Wed., August 3, 2011 For: Construction Equipment • Grand Rapids, MI Wed., August 17, 2011 For: Construction Equipment

BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • San Bernardino, CA Sat., June 25, 2011 For: Construction Equipment • Sacramento, CA Sat., July 9, 2011 For: Construction Equipment • San Bernardino, CA Fri., July 22, 2011 For: Construction Equipment • Sacramento, CA Sat., August 13, 2011 For: Construction Equipment • San Bernardino, CA Sat., August 27, 2011 For: Construction Equipment • Sacramento, CA Sat., September 10, 2011 For: Construction Equipment • San Bernardino, CA Fri., September 23, 2011 For: Construction Equipment • Sacramento, CA Sat., October 8, 2011 For: Construction Equipment • San Bernardino, CA Sat., October 22, 2011 For: Construction Equipment • Sacramento, CA Sat., November 12, 2011 For: Construction Equipment • San Bernardino, CA Thurs., November 17, 2011 For: Construction Equipment • Sacramento, CA Sat., December 10, 2011

DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.co m 800-433-6670 • Harrison, MI Thurs., June 23, 2011 For: June Contractors Auction DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., June 25, 2011 • Prospect, CT Sat., August 20, 2011 • Prospect, CT Sat., October 15, 2011 • Prospect, CT Sat., December 10, 2011 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Telford, PA Wed., June 22, 2011 For: Construction Equipment • Wind Gap, PA Wed., July 13, 2011 For: Construction Equipment • Huntington, WV Wed., July 20, 2011 For: Construction Equipment

IRAY AUCTIONS www.iraymn.com 320-968-7230 • Johnson Creek, WI Fri., July 22, 2011 • ONLINE ONLY Fri., August 5, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., August 19, 2011 • Foley, MN Fri., September 16, 2011 • Portage, WI Fri., October 14, 2011 • ONLINE ONLY Fri., November 4, 2011 www.IRAYONLINE.COM • Sioux Falls, SD Fri., November 18, 2011 • Foley, MN Fri., December 2, 2011 IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • Wed., June 22, 2011 For: Construction Equipment • Thurs., June 23, 2011 For: Construction Equipment • Fri., June 24, 2011 For: Construction Equipment • Thurs., June 30, 2011 For: Construction Equipment J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL Fri.-Sat, June 24-25, 2011 For: Alabama Dept. of Transportation JOSEPH FINN CO. AUCTIONEERS & APPRAISERS www.josephfinn.com 617-964-1886 • Avon, MA Wed., June 29, 2011 For: Late Model Construction Equipment MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728 • Newberry, SC Wed., August 17, 2011 For: One Owner Absolute Auction MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311 • Magnolia, TX Tues., June 21, 2011

For: Construction Equipment PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT Fri.-Sat, June 24-25, 2011 For: Construction, Earthmoving and Paving Equipment PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Bidding Starts to Close Thurs., June 30 - 10AM For: Construction Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN September 17, 2011 For: Construction Equipment • Lebanon, TN December 10, 2011 For: Construction Equipment ROY TIETSWORTH AUCTIONEERS www.tietsworth.com 585-243-1563 • Seneca Falls, NY Thurs., August 11, 2011 For: Construction and Farm Equipment, Antique Equipment • Oswego, NY Sat., August 27, 2011 For: Contractor Equipment Auction • Lansing, NY Sat., September 10, 2011 For: Municipal Surplus and Contractor Equipment Auction • Groveland, NY Sat., September 17, 2011 For: Construction Equipment, Heavy and Light Trucks • Springville, NY Sat., June 18, 2011 For: Farm Tractor and Machinery Auction • Rochester, NY Sat., October 1, 2011 For: Heavy Construction Equipment, Cars and Trucks • Hamburg, NY Sat., October 8, 2011 For: Municipal and Contractor Equipment Auction • Syracuse, NY Sat., October 22, 2011 For: Municipal and Contractor Equipment Auction • Groveland, NY Sat., December 3, 2011 For: Farm and Construction Equipment, Heavy and Light Trucks RYAN AUCTION SALES www.ryanauctionsales.co m 603-491-6159

• Virtual Equipment and Truck Auction Thurs., June 30, 201110AM • Virtual Equipment and Truck Auction Tues., July 26, 201110AM • Virtual Equipment and Truck Auction Thurs., August 18, 201110AM • Virtual Equipment and Truck Auction Tues., Sept. 6, 201110AM • Virtual Equipment and Truck Auction Thurs., Sept. 22, 201110AM • Virtual Equipment and Truck Auction Tues., October 11, 201110AM • Virtual Equipment and Truck Auction Thurs., October 27, 201110AM • Virtual Equipment and Truck Auction Thurs., Nov. 17, 201110AM • Virtual Equipment and Truck Auction Thurs., Dec. 15, 201110AM STEFFES AUCTIONEERS INC. www.steffesauctioneers.co m 701-237-9173 • Litchfield, MN Thurs., July 14, 2011 For: Construction and Ag Equipment, Vehicles and More! • Montgomery, MN Fri., July 22, 2011 For: George Ohmann Antique Tractor Auction • West Fargo, ND Wed., July 27, 2011 For: Construction and Ag Equipment, Trucks, Vehicles and More WILKINSON AUCTION COMPANY www.warco1.com 608-739-4404 • Richland Center, WI Sat., June 25, 2011 For: Construction and Crushing Equipment, Trucks and Trailers WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com 800-443-9580 • York Springs, PA Fri., June 24, 2011 For: Southern PA Contractors Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 39

Major Fleet Reduction Thursda ay, June 30 Featuring equipment from

South Carolina

2006 Deere 270D LC

2005 CA AT T 257B

2003 Dynapac CA262PD

2003 Deere 850C II WT

2003 Deere 330CLC

2002 Reynolds 17CS

2000 Deere 650H LGP

2000 Deere 624H

1999 Deere 9400

1999 Deere 310SE

1996 Deere 548G

1995 Hitachi EX270 LC

1995 Deere 772BH

1994 Deere 624G

1992 Deere 4455

1989 Dynapac CA25 II D

V Visit isit our we website bsite to see the complete list of equipment, review review the guaranteed inspection reports, repor ts, and place yyour our bids bids,, or contact yyour our local representa representative tive Gene Kendrick Kendrick at at 864-680-8114.

Inspected and Guaranteed www.ironplanet.com s 888-433-5426 A u c t i o n C o m p a ny B o n d # 70 2 5 97 8 5 . P r e l i m i n a r y l i s t t o d a t e . Eq u i p m e n t s u b j e c t t o c h a n g e .

Page 40 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Donald Oaks (L) of BDS Truck & Equipment Sales and Daniel DeLaTorre strategize over where they’ll place their bids.

It was a family affair as the father and son team of Dexter Johnson Jr. and Sr. of Dexter Johnson Construction look to add a piece of equipment to their fleet.

Public Sale Brings in Big Numbers for WCA in Perris

CA held a public sale April 14 in Perris, Calif. Highlights of the sale included a 2002 Caterpillar 966G Series II wheel loader that sold for $90,000, a 2005 Case 621D wheel loader that brought in $52,500 and a 1999 Kawasaki 80Z IV-2 wheel loader that was won with a bid of $45,000.

Edward Walker (L) of Roberts Bobcat and Robert Becker of Becker’s Bobcat & Dump Truck Service are all smiles during the sale.

Customers are ready to watch the parade of equipment up for bid.

Eddie Araujo (L) of Horizon Crane and Josh Methling of Curtis Drilling Company are enjoying the California sunshine during the WCA sale.

Sean Swanson (L) of Swanson Backhoe Inc. and Richard Scott of Scott Equipment take a break from the auction action.

Taking a chance to relax a little during the sale are Lyle Falls (L) and Jon Lorenz of Wildlife Control Systems.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 41

2006 CAT D8T

2007 CAT 420EIT

FOLLOW THE NEW LEADER. INNOVATIVE EXPERIENCED KNOWLEDGEABLE

UNRESERVED PUBLIC AUCTION: JULY 12 . FARMINGTON, NEW MEXICO 5500 US HWY 64 // Farmington, NM 87401

2005 MACK CXN613

2007 MITSUBISHI FG140 *Equipment subject to change

FEATURING THE COMPLETE DISPERSAL OF HERCULES OILFIELD & CONSTRUCTION, INC

View the full equipment list, photos, and inspections at: www.catauctions.com

BID ONLINE: WWW.CATAUCTIONS.COM

©2011 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Follow the new leader.® www.catauctions.com

CAT AUCTION SERVICES 860 Blue Gentian Road, Suite 100 Eagan, MN 55121 855.228.2286 info@catauctions.com

Page 42 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SONS INC

FELLING TRAILERS ......................................................32

HOUSTON TX.........................................................37

FLANGE LOCK.................................................................2

ALLU GROUP...................................................................8

FLUID CONTROL SERVICES .........................................2

ATLAS COPCO - ROCKSTAR.......................................12

GRINDERCRUSHERSCREEN.COM ............................16

BAR NONE AUCTION

HENDRIX MACHINERY LLC ...........................................3

SAN BERNADINO CA ...........................................37 BARGAINS .....................................................................35 BOBCAT COMPANY ......................................................24 BRADLEYS TRACTOR CITY...........................................5 CAT AUCTION SERVICES FARMINGTON NEW MEXICO ...............................41 CEG SCALE MODELS.....................................................7

IRON PLANET ONLINE AUCTION..................................................39 JJ SCHECKEL CORP ......................................................6 KAWASAKI CONSTRUCTION MACHINERY................19 KIRBY-SMITH MACHINERY INC...................................14 KOMATSU AMERICA CORP .........................................21 LBX ............................................................................22,23

CLASSIFIEDS.................................................................35 CONSTRUCTION EQUIPMENT COMPANY ................17 CONSTRUCTION EQUIPMENT GUIDE WANTED .................................................................36 TESTIMONIAL ........................................................33 ATTACHMENTS PROMO.......................................20

MB AMERICA INC ..........................................................13 MIDCO DEMOLITION TOOL CO...................................14 NATIONAL ATTACHMENTS...........................................29 RECS-BAYONET BREAKER ...........................................6 RITCHIE BROS. AUCTIONEERS

ONE BUY NATIONAL COVERAGE .......................18

SPOKANE WA & AUCTION CALENDAR ..............43

DOOSAN INFRACORE AMERICA CORP ....................26

ROAD BUILDERS MACHINERY ..................................6,9

DOOSAN PORTABLE POWER .....................................25

ROAD MACHINERY CO ................................................44

DURATECH ....................................................................16

ROTOBEC ......................................................................29

DYNAPAC .......................................................................24

SCHAEFER ENTERPRISES .........................................26

ESCO CORP ..................................................................28

SENNEBOGEN ..............................................................15

FAE USA INC....................................................................8

TOWMASTER.................................................................34

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 18, 2011 • Page 43

U N R E S E R V E D P U B L I C AU C T I O N

Spokane

AUCTION A UCTION C ALENDAR CALENDAR

Washington JJune une 3 30, 0, 2011 2011

36 2007 METSO LOK LOKOTRACK KO OTRACK LT105 LT105 41 X 56 IN IN..

2 2008 008 MCC CLOSKEY LOSKEY B BROS ROS R R155 155 5 X 1 16 6 FFTT 2 D DECK ECK

CURRENT CURRENT INVENTORY INVENTORY INCLUDES: INCLUDES:

Crawler Tractors Wheel Loaders Hydraulic Excavators Motor Scrapers

CAT CA AT D8R D8

Rock Trucks Truck Tractors Lowboys Jaw Crushers Conveyors

FFor or ccomplete omplete aand nd u up-to-date p-to-date eequipment quipment llistings istings vvisit isit

bauction.com » rrbauction.com CALL ODAY TO TO ADD ADD YOUR YOUR EQUIPMENT CALL TTODAY EQUIPMENT TO TO THIS THIS UPCOMING UPCOMING AUCTION AUCTION – 360.956.1500 360.956.1500

Upcoming Unreserved Public Auccttions

USA HOUSTON, TX COLUMBUS, OH ALBUQUERQUE, NM BELLEVUE, IA PITTSBURGH, PA PHOENIX, AZ DETROIT, MI JACKSON, MS SALT LAKE CITY, UT STATESVILLE, NC ST. LOUIS, MO SPOKANE, WA NEW ORLEANS, LA FREDERICK, MD LOS ANGELES, CA SACRAMENTO, CA FORT WORTH, TX HARTFORD, CT

713.455.5200 937.568.9500 505.836.0738 563.872.5034 724.947.7240 602.269.5631 810.691.6076 601.939.2258 801.250.1836 704.873.6633 618.688.1625 360.956.1500 713.455.5200 410.287.4330 951.940.9441 530.724.3900 817.237.6544 860.684.1055

CANADA LONDON, ON SASKATOON, SK TORONTO, ON GRANDE PRAIRIE, AB TRURO, NS MONTREAL, QC REGINA, SK CHILLIWACK, BC PRINCE GEORGE, BC GLASSVILLE, NB INTERNATIONAL BRISBANE, QLD, AUSTRALIA GEELONG, VIC, AUSTRALIA MOERDIJK, NLD MONCOFA, SPAIN ST. AUBIN SUR GAILLON, FRANCE CANCUN, MEXICO CAORSO, ITALY DUBAI, UNITED ARAB EMIRATES

519.425.4321 306.933.9333 1.800.357.0659 780.538.1100 902.895.3700 450.464.2888 306.776.2397 604.823.2700 250.963.8491 902.895.3700 +61.73382.4444 +61.35245.3333 +31.168.392.200 +34.964.580559 +33.2.32778610 +52.1.993.311.5589 +39.0523.818801 +971.4.812.0600

T ARE SUBJECT TO CHANGE * NOTE: NEW DATE – DATES

AUCTION A UCTION S SITE: ITE: 5516 N. Staarr Rd., Newman Lake, WA 99025 ∙ Sale Starts 9 AM Auction Company License #1981 Motor Vehicle Dealer License #1539

JUN 22 & 23 JUN 23 JUN 24 JUN 24 JUN 27 JUN 28 JUN 28 JUN 29 JUN 29 JUN 30 JUN 30 JUN 30 JUL 15 JUL 19 JUL 22 JUL 26 JUL 27 & 28 JUL 28 * JUN 21 JUN 23 JUN 28 * JUN 29 JUL 7 JUL 12 JUL 13 JUL 20 JUL 27 JUL 28 JUN 21 JUN 23 JUN 23 & 24 JUN 30 & JUL 1 JUL 5 JUL 7 JUL 14 JUL 19 & 20

Page 44 • June 18, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Value Priced • Quality Equipment

Call Gary or Wendy Today

For more details on our used equipment visit www.roadmachinery.com/equipment

866-400-5250

Dozers

Year STK#

Hours

Price

KOMATSU D65EX-15

2005

EMD145 3255

CALL

KOMATSU D65PX-15E

2008

EMD286 3120

CALL

KOMATSU D65PX-15E

2008

EMD292 2415

CALL

KOMATSU D65EX-15E

2007

EMD294 1551

CALL

2005 KOMATSU PC200LC-7, Stk# EMD60, 1339 Hrs, Cab with A/C ..........................................................................................CALL

2007 KOMATSU WA320L-5, Stk# EMD88, 2513 Hrs, ROPS cab w/AC ..........................................................................................................CALL

2007 KOMATSU D65EX-15E, Stk# EMD294, 1551 Hrs, ROPS Cab, Straight Blade..........................................................................CALL

Excavators Crawlers

Year STK#

Hours

Price

KOMATSU PC200LC-7

2005

EMD62

2684

CALL

KOMATSU PC200LC-7

2005

EMD61

2617

CALL

KOMATSU PC200LC-7

2005

EMD60

1339

CALL

KOMATSU PC220LC-8

2007

EMD81

2530

CALL

KOMATSU PC300HD-7EO 2007

EMD104 4221

CALL

KOMATSU PC400LC-7

2005

EMD16

3965

CALL

KOMATSU PC400LC-7

2005

EMD54

4154

CALL

KOMATSU PC400LC-7E0 2007

EMD24

2929

CALL

KOMATSU PC800LC-8

EMD110 1827

CALL

2008

2007 Komatsu WA450-6, Stk# EMD64, 2,896 hrs. ROPS cab with AC............................................................................................CALL

SOLD 2008 KOMATSU PC270LC-8, Stk# EMD138, 1193 Hrs, Cab w/AC, 19’2” Boom, 10’ Arm, 31.5 Triple Grouser Track ....................CALL All certified machines include a minimum of 30 days powertrain warranty. All certified machines include the following financing (OAC). Subject to change without notice. 12 Months - 3.5% • 24 Months - 4.5% • 36 Months - 5.5% • 48 Months - 6.5%

2005 KOMATSU PC220LC-8, Stk# EMD81, 2530 Hrs, Cab w/AC, 19’2” HD Boom, 10’0” HD Arm, 31.5 Triple Grouser Track ......CALL

2005 KOMATSU PC400LC-7, Stk# EMD16, 3965 hours, Cab w/AC ................................................................................................CALL

Wheel Loaders

Year STK#

Hours

Price

KOMATSU WA450-6

2008

EMD180 641

CALL

KOMATSU WA250L-5

2007

EMD77

1274

CALL

KOMATSU WA320L-5

2007

EMD88

2513

CALL

KOMATSU WA450-6

2007

EMD64

2896

CALL

KOMATSU WA480-5L

2006

EMD18

4516

CALL

SOLD 1998 KOMATSU WA380-3, Stk# EMD4, 7478 hours, ROPS, Cab w/ A/C, GP BUCKET w/ BO Teeth ............................................CALL Corporate Headquarters

Komatsu Remarketing Certified Used Equipment

Arizona

Used Equipment Inquiries

Komatsu Distributor

www.roadmachinery.com/equipment

Contact

Gary Beal Used Equipment Manager 866-400-5250 gbeal@roadmachinery.com

Wendy Schwertley Sales Administrator 602-256-5189 wschwertley@ roadmachinery.com

For all other inquiries contact your local branch

Gilbert 480-545-2400 Phoenix 602-252-7121 Prescot 928-778-5621 Tucson 520-623-8681

New Mexico Albuquerque 505-345-8383 Farmington 505-324-8601

4710A East Elwood, Suite 6 & 7 • Phoenix, AZ 85040 Phone: 602-252-7121 • Fax: 602-253-9690 www.roadmachinery.com

California Northern California Sacramento 916-375-3540 Redding 530-229-3820

Southern California Los Angeles, Orange, Riverside, San Bernardino and Ventura Counties 909-355-3600 Bakersfield 661-695-4830 Perris 909-355-3600

Texas

El Paso 915-872-1001

Mexico

Cananea, Sonora 011-52-6453328300