West 11 May 31, 2026 by Construction Equipment Guide

Security Paving Tackles California Interchange

By Chuck MacDonald CEG CORRESPONDENT

Tulare sits on State Route 99, roughly halfway between Bakersfield and Fresno. Located in the heart of the San Joaquin Valley, Tulare has been an important transportation center for crops, goods and vacationers headed for nearby Sequoia and Kings Canyon National Park.

A city of nearly 70,000, Tulare sits in the foothills of the Sierra Nevada.

The California Department of Transportation (Caltrans) is working with Security Paving of Westlake Village to fix an important interchange in

Tulare. The work on the International Agri-Center/Commercial Avenue Interchange is expected to ease congestion and improve safety along SR 99.

The construction team also plans to complete the $80 million job in the fall of 2026.

The project also will alleviate traffic issues on the nearby Paige Avenue interchange.

By Lucy Perry CEG CORRESPONDENT

AASHTO reported in April that state departments of transportation have charted their plans for construction this year. State agencies will be targeting worn pavement, aging bridges, highway safety and expanded transit. In March, ARTBA released numbers on the value of transportation projects expected to break ground this spring. At $10.1 billion, that’s down some from the $11.7 billion value a year ago and first quarter award activity was down as well.

Stock photo

The construction team crafted a detailed safety

for the work to protect both motorists and workers.

2018 Kobelco SK300LC-10, Stk#: HR-1356, EROPS, A/C, 7,145 hrs., 23 ft. Digging Depth, 35 ft. Digging Reach, 6 Cyl., wt. 67,900 lbs., 252 hp

$79,500

2015 Cat TL10-55C, Stk#: HR-1058, 10,000 lbs., 43 ft., 8,836 hrs., 60" Forks, 74" Frame, Aux. Hyd., 14.00x24 Tires, 4 Cyl., Cat Eng ........ $49,500

EROPS, A/C, 1,373 hrs., GP Bucket $159,500

2023 John Deere 210P, Stk#: HR-1432, EROPS, A/C & Heat, Radio, 4,217 hrs., New Engine, 41" Bucket w/Hyd. Thumb, 32" Pads, Rear View Camera. (Warranty 5k hrs. Powertrain & Hyd's) $139,500

2019 FreightLiner Water Truck, Stk#: HR1826, 2,000 gal. Water Tank, Front, Side and Rear Spay Heads, Rear Hose Reel, 11Rx22.5 Tires,

400x75x28 Foam Filled Tires, Cummins Eng $109,500

2021 Komatsu D61PX-24, Stk#: HR-13393, EROPS, A/C & Heat, Radio, 7,003 hrs., 6 Way Blade, 34" Pads,

2023 John Deere 17GX, Stk#: HR-1440, OROPS, 497 hrs., 7 ft. Digging Depth, 14 hp., 9" Pads, 3' 3" Wide, 3,800 Weight $27,500

2022 Linkbelt 210-4, Stk#: HR-1752, 50 Ft. Long Reach, EROPS, A/C & Heat, 1,041 hrs., Digging Bucket $149,500

2024 John Deere 135P, Stk#: HR-1589,

2023 John Deere 450P LGP, Stk#: HR-1557, EROPS, A/C & Heat, Radio, 1,254 hrs., 6 Way Blade, 24" Pads, 9' 7" Wide $109,500

HOW HANDS-ON EXPERIENCES IN RENO LED TO JOBSITE SUCCESS IN CALIF.

After connecting with MB Crusher’s Reno, Nev., team, “Robert” scheduled a live demonstration of the MB-HDS214 padding bucket, part of MB Crusher’s screening attachment line.

8 BOBCAT CO. HONORS SERVICE PROS WITH B.R.A.V.O. PROGRAM

Through its B.R.A.V.O. program, Bobcat offers exclusive savings and financing on eligible equipment to active and retired U.S. military members, veterans, first responders and medical professionals.

10 TAKEUCHI HONORS TOP DEALERS

DURING DEALER 360 AWARDS

Takeuchi honored its North American Dealer of the Year, Dealer Salesperson of the Year and those who achieved 2025 Dealer and Salesperson 360 status at the Dealer 360 Awards reception during ConExpo-Con/AGG in Las Vegas.

10 MANITOWOC’S ‘BASKETS FOR BROOKE’ CHARITY DRIVE GENERATES

$50,000

11 NEW BOBCAT OF WACO BRANCH OPENS IN ELM MOTT ALONG I-35

Compact Construction Equipment LLC, the authorized Bobcat equipment dealer in south, central and west Texas, announced the opening of its new Bobcat of Waco branch location.

11 VERMEER OPENS NEW WEATHERFORD, TEXAS, FACILITY ALONG I-20

Vermeer Texas-Louisiana, the authorized dealer for Vermeer construction equipment in Texas and south Louisiana, opened a new facility in Weatherford, Texas. The 16,000-sq.-ft. building is located on five acres.

16 GULF COAST JCB CELEBRATES GRAND OPENING IN BATON ROUGE

Gulf Coast JCB celebrated the grand opening of its new full-service dealership with a ribbon-cutting ceremony. The new dealership reinforces JCB’s accelerating investment in North America.

24 SAFE DIGGING TIPS FOR SUMMER CONSTRUCTION, UTILITY WORK

Summer is a critical time for those in construction and utility work. This busy season depends on crews’ productivity as they work around storms and high temperatures.

FOXX LOADERS EXPANDS LINEUP FOR RANGE OF APPLICATIONS

Foxx Loaders introduced its expanding lineup of Foxx attachments — premium attachments engineered to deliver maximum performance across a wide range of applications.

STELLAR LEVELS UP POPULAR PRODUCT LINES WITH 2026 LAUNCHES

First introduced to the market at ConExpo-Con/AGG and Work Truck Week, these enhancements reflect Stellar’s continued commitment to refining its products to better meet the needs of today’s operators.

40 FELLING TRAILERS NAMES 2026 ‘TRAILER FOR A CAUSE’ BENEFICIARY

This time-honored tradition involves auctioning a custom Felling FT-12 Pan drop deck trailer online, with 100 percent of the winning bid donated to the selected nonprofit organization.

43 M.H. EBY ANNOUNCES NEW DISTRIBUTORS IN PA., UTAH, LA.

These new partnerships expand Eby’s truck body distribution and service coverage for aluminum truck body solutions and upfitting partners that strengthen service coverage in

Purple

Jeff Martin Auctioneers will conduct an unreserved strategic fleet realignment auction for Reliable Crane Services, offering approximately 160 lots of cranes, trucks, trailers and related equipment on June 16, 2026.

Purple

How Hands-On Experiences in Reno Led to Jobsite Success in California

Designed with interchangeable rotating shaft kits that can be replaced directly on the job site, the MB-HDS214 allows operators to process a variety of materials and adapt to changing project needs, according to MB Crusher.

When buying equipment, most contractors don’t rely on online research alone, they want to see it, test it and understand how it performs in real-world conditions. Much like buying a car, the ability to experience a machine firsthand can make all the difference.

That was the case for Robert, a contractor based in Capo Beach, Calif.

After connecting with MB Crusher’s Reno, Nev., team, Robert scheduled a live demonstration of the MB-HDS214 padding bucket, part of MB Crusher’s screening attachment line. Designed with interchangeable rotating shaft kits that can be replaced directly on the job site, the MB-HDS214 allows operators to process a variety of materials and adapt to changing project needs, according to MB Crusher.

What started as interest quickly turned into confidence.

“I probably wouldn’t have bought this screener if it weren’t for the back-and-forth and the ability to plan and demo it. The whole process was really great,” said Robert.

While digital tools and online purchasing continue to grow, the demand for hands-on experience remains strong. In fact, studies show that approximately 57 percent of consumers still prefer to see, touch and test products before making a purchase, especially when it comes to heavy equipment investments, according to MB Crusher.

This is where MB Crusher’s approach stands out.

Through its Reno branch and dealer network, MB Crusher offers customers across Nevada and California the opportunity to request live demonstrations, either at a local branch or directly on site. This ensures contractors can evaluate performance, compatibility and results before making a final decision.

For Robert, the impact went beyond the purchase.

“We’ve been recycling, and we’ve saved a ton of money by not having to go to the landfill. Because of the screener, we’re able to divert material and avoid those fees. Now we’re pocketing that money, and it’s paying for itself.”

By experiencing the equipment firsthand, Robert was able

to identify the right solution for his specific needs. leading to efficiency, saving cost and long-term value.

This customer success story highlights the importance of hands-on demonstrations and regional support in helping contractors make confident, informed decisions.

For more information, visit mbcrusher.com. 

Bobcat Co. Honors Service Pros With B.R.A.V.O. Program

Bobcat Co. is recognizing the vital role service-oriented professionals play in building and supporting communities across the country.

Through its B.R.A.V.O. program — Benefits for Responders and American Veteran Ownership — Bobcat offers exclusive savings and financing on eligible equipment to active and retired U.S. military members, veterans, first responders and medical professionals.

While Military Appreciation Month provides a meaningful opportunity to highlight Bobcat’s longstanding support for the military community, the B.R.A.V.O. program is available year-round as part of the company’s broader commitment to those who serve on the front lines — both in uniform and in essential community roles.

The B.R.A.V.O. program offers eligible participants valuable savings and special financing options on qualifying Bobcat equipment. Designed to support professionals who protect, care for and serve others, the program helps make dependable tools more accessible for work, property maintenance and small business needs.

“Supporting those who serve our country and their communities has long been part of who we are at Bobcat,” said Mike Ballweber, president, Doosan Bobcat North America Inc.. “The B.R.A.V.O. program reflects our ongoing commitment to stand behind those who demonstrate courage, resilience and integrity every day.”

Available through authorized Bobcat dealerships, the B.R.A.V.O. program connects eligible customers with local dealer support and equipment built for real-world demands whether on the job site, in emergency response or in service to their communities.

For more information, visit bobcat.com. 

Bobcat photo

MB Crusher photo

Through its Reno, Nev., branch and dealer network, MB Crusher offers customers across Nevada and California the opportunity to request live demonstrations, either at a local branch or directly on site.

#93506 | 2023 KOMATSU D61PXi-24, PAT BLADE, 6345 HOURS $134,500

Takeuchi Honors Top Dealers, Salespeople During Dealer 360 Awards in Las Vegas

The Dealer 360 Awards recognize Takeuchi dealers across the United States and Canada for excellence in sales performance, facilities, training, accounts receivables, marketing/parts and service. Complementing this effort, the Salesperson 360 Awards recognize individual sales professionals who take a well-rounded, professional approach to representing Takeuchi. Together, these programs celebrate the people and organizations who are committed to delivering a consistent, high-quality customer experience.

“Our success starts with strong dealers and salespeople, which is why we created this awards program,” said Jeff Stewart, president of Takeuchi-US. “It sets clear operational standards that help deliver a consistent customer experience and support long-term growth.”

Twenty dealerships across the United States and Canada were recognized as Dealer 360 winners for 2025, reflecting excellence in sales performance, facilities, training, marketing, parts and service.

CCS Equipment Sales is Takeuchi’s 2025 Dealer of the Year. Established in 1998, CCS is a family-owned and operated equipment dealership serving the eastern two-thirds of North Carolina with locations in Youngsville, Angier and Ayden. They offer equipment sales, rental, service and parts.

“The team at CCS has been in this business for nearly 30 years,” said John Vranches, eastern division sales manager of Takeuchi-US. “They know what it takes to build strong relationships with their customers, and their business continues to thrive because of the outstanding effort they put forth every day. We’re happy they’re part of the Takeuchi family, and we congratulate them on this achievement.”

In addition to CCS Equipment Sales, the following dealers also met or exceeded Dealer 360 criteria by Dec. 31, 2025:

• ACT Construction Equipment, North Carolina and South Carolina

• ALTA Equipment, Florida and Michigan

• Appling Motors of Baxely, Georgia

• Atlantic Coastal Equipment, Georgia

• Bennett Equipment & Supply, Georgia and South Carolina

• Cobb County Tractor, Georgia

• Cowin Equipment, Alabama, Georgia and Florida

• Dittamore Implement, Illinois

• Grand Equipment, Michigan

• Hawkins Graves, Virginia

• Jasper Tractor, Georgia

• Luby Equipment, Illinois and Missouri

• MasCo Equipment, Texas

• McClung-Logan Equipment Co., Delaware, Maryland and Virginia

• Parman Tractor & Equipment, Tennessee

• Powerhouse Outdoor Equipment, Georgia

• Star Equipment, Iowa

• Tri-West Tractor, California

• Williams Equipment, Mississippi and Arkansas

“Our dealers’ dedication and commitment to excellence have helped Takeuchi continue to increase its market share in North America,” said Stewart. “We thank them for their efforts this past year, and we will do everything within our power to help them achieve even greater success in 2026.”

photo

Bill Smith of Cobb County Tractor ranked No. 1 in Takeuchi sales throughout North America, making him the Salesperson of the Year for the seventh time.

Along with recognizing top-performing dealerships, Takeuchi honored 44 individual dealer sales professionals who achieved Salesperson 360 status by demonstrated exceptional performance and commitment to their customers.

Bill Smith of Cobb County Tractor ranked number one in Takeuchi sales throughout North America, making him the Salesperson of the Year for the seventh time — more times than any other Takeuchi dealer sales representative in the United States has ever achieved.

“Bill continues to set a high standard,” said Vranches. “He understands his customers’ needs and consistently delivers the right equipment solutions for their projects. That kind of experience and consistency is not easy to find. We congratulate Bill on yet another very successful year, and we look forward to seeing what he accomplishes in 2026 and beyond.”

For more information, visit takeuchi-us.com. 

Basketball Hoop a Draw... Manitowoc Raises $50,000 at ConExpo 2026 Charity Drive ‘Baskets

for

Brooke’

Manitowoc photo

During the show, participants made more than 2,000 baskets, generating $50,000 for Brooke’s House.

Visitors to the Manitowoc ConExpo stand were invited to step up to a basketball hoop and support a worthy cause. Manitowoc pledged to donate $25 for every basket made during the show to Brooke’s House, a Hagerstown, Md.based nonprofit that helps women in their substance abuse recovery efforts.

During the show, participants made more than 2,000 baskets, generating $50,000 for Brooke’s House. Manitowoc leadership donated these funds to Brooke’s House programs for women in recovery. The partnership, which began in 2020, has proven mutually beneficial with nearly 20 graduates now employed by Manitowoc.

In 2025, the company further supported the nonprofit through limited-edition T-shirts and by offering its sixweek welding school to women in the program to help them launch new careers with new skill sets. In addition, prior to this past year, the company provided additional financial support, donating more than $250,000 to Brooke’s House.

“We like to think of this as more than financial support. Manitowoc is participating to help create life-changing employment opportunities for the women of Brooke’s House,” said Dave Hull, senior vice president of sales, Americas and Europe mobiles, of Manitowoc. “It’s about supporting people in our community who need a helping hand, and we are happy to encourage them in their journeys with us.”

For more information, visit manitowoc.com. 

Takeuchi photo

CCS Equipment Sales is Takeuchi’s 2025 Dealer of the Year.

Takeuchi

New Bobcat of Waco Branch Opens in Elm Mott Along I-35

Compact Construction Equipment LLC, the authorized Bobcat equipment dealer in south, central and west Texas announced the opening of its new Bobcat of Waco branch location.

Previously co-located with the Vermeer Texas-Louisiana branch, the new standalone location is at 16629 Interstate 35 in Elm Mott, just north of Waco.

The expanded 5-acre property offers increased yard capacity for equipment inventory, more service bays to reduce turnaround time, a larger parts warehouse to better support customer needs, and an enhanced showroom to improve the customer experience.

The new 10,000-sq.-ft. facility will allow Bobcat of Waco to deliver a dedicated experience to customers across the region for their equipment sales, rentals, parts and service needs, according to the company.

The grand opening of the new location was held on April 17, 2026.

“We had a unique opportunity to purchase the building next to our existing cobranded location and felt that it was the right time to create dedicated facilities for both brands,” said Jason Rush, chief operating

Bobcat of Waco photo

The new Bobcat of Waco location at 16629 Interstate 35 in Elm Mott, Texas

officer of Compact Construction Equipment. “This investment reflects our continued commitment to providing exceptional service, expanded inventory and better support to customers throughout the area.”

Compact Construction Equipment is the authorized dealer for Bobcat equipment in south, west and central Texas with 18 locations across the region.

For more information, visit bobcatcce.com. 

Vermeer Opens New Weatherford, Texas, Facility Along I-20

Vermeer Texas-Louisiana, the authorized dealer for Vermeer construction equipment in Texas and south Louisiana, opened a new facility in Weatherford, Texas.

The new branch is located on Interstate 20 on the western edge of Weatherford. The 16,000-sq.-ft. building is located on five acres, offering a large yard for equipment inventory, six full-size service bays and an expanded parts warehouse.

A grand opening of the new location was held on April 15, 2026.

“We are extremely excited to open this new touch point in Weatherford,” CEO Whit Perryman said. “The west side of the Dallas-Fort Worth metroplex continues to grow and the new branch will offer contractors a convenient option to save time and money when they need equipment, parts or service.”

Vermeer Texas — Louisiana is the authorized dealer for Vermeer equipment in Texas and south Louisiana with 15 locations across the region.

NEW! Next Gen Crawler Excavators

Get Bigger Payoffs with Hyundai Next Generation HX Excavators

Powered by Hyundai engines, these new Next Generation HX excavators deliver 22% higher power output than previous versions. This performance is matched by a significant reduction in operating costs, offering up to 9% improved fuel efficiency. Let’s put smarter productivity to work. Talk with a Hyundai dealer near you about performance gains and fuel savings.

Scale Models for Sale

Bucyrus Erie 22-B Dragline, 1:50 scale - $295

Bucyrus Erie 22-B Cable Shovel, 1:50 scale - $215

Vintage Caterpillar No.12 Motor Grader, 1:50 scale - $135

Bucyrus Erie 22-B Cable Backhoe, 1:50 scale - $215

Wheel Loader, 1:50 scale - $60 Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $160

Yanmar SV26 Compact Excavator, 1:32 scale - $130

Toucan Manlift, 1:25 scale - $40

DH4B Trencher, 1:35 scale - $40

Caterpillar 259D3 Compact Track Loader, 1:50 scale - $65

Chalmers TS300 Scraper & Forty-Five Motor Grader, 1:50 scale - $160

Gulf Coast JCB Celebrates Grand Opening in Baton Rouge

Gulf Coast JCB celebrated the grand opening of its new full service dealership with a ribbon-cutting ceremony. The new dealership reinforces JCB’s accelerating investment in North America and its commitment to building a stronger, more capable dealer network for the future.

“This is an exciting time for JCB as we continue to invest in our future across North America,” said Richard Fox-Marrs, president and CEO of JCB North America. “The opening of Gulf Coast JCB is a testament to that commitment, strengthening our dealer network and ensuring customers in this important region have access to the equipment, service and support they need to succeed.”

The event welcomed customers, local officials and industry partners to celebrate the opening of a facility designed to enhance equipment sales, parts and service across the Gulf Coast region. Attendees participated in the ribbon cutting ceremony, toured the new facility and experienced live equipment demonstrations that showcased JCB’s performance.

Driving Growth Across Gulf Coast

As a cornerstone of the Baton Rouge and New Orleans heavy equipment community, Gulf Coast JCB represents a significant step forward in expanding access to JCB equipment and expertise in a region experiencing strong growth in construction, infrastructure and agriculture. With increased parts inventory, responsive service capabilities and a dedicated local team, the dealership is positioned to improve uptime and deliver faster, more reliable support.

“Our grand opening represents a major milestone for our team and our customers,” said Steve Brown, general manager, Gulf Coast JCB. “We are proud to bring a new level of service, responsiveness and commitment to this region. Our focus is on building long-term partnerships and delivering the solutions our customers need to keep moving forward.”

Backed by JCB’s global strength, Gulf Coast JCB delivers high-performing equipment while maintaining a strong focus on accountability, service and long-term customer success. The facility is designed to support a wide range of applications, from compact equipment to heavy line machines, helping customers improve productivity and efficiency on every job site.

Expanding Support in Key U.S. Markets

This grand opening is one of several significant investments taking shape across North America, reflecting JCB’s growing momentum and long-term commitment to expanding its presence in key markets.

Gulf Coast

full-service JCB dealer serving the Baton Rouge, New Orleans and greater Gulf Coast region with equipment sales, parts and service support.

Continued investment in facilities, manufacturing and dealer development is strengthening support for customers, with growth across Texas, the Southeast and the Midwest driving expanded dealer coverage and increased access to equipment, parts and service.

“We are excited to be part of JCB’s continued growth across North America and to bring that momentum to our customers here on the Gulf Coast,” said Chandler

Cleveland, dealer principal, Gulf Coast JCB.

“Our team is ready to deliver the equipment, service and support this region needs, and we look forward to serving our customers for years to come.”

For more information, visit gulfcoastjcb.com and jcb.com.

About Gulf Coast JCB

Gulf Coast JCB is a full service JCB dealer serving the Baton Rouge, New Orleans

and greater Gulf Coast region with equipment sales, parts and service support.

The company is focused on building and powering progress alongside its customers, employees and communities by delivering reliable equipment, responsive service and innovative solutions.

Through a commitment to safety, accountability and continuous improvement, Gulf Coast JCB builds lasting partnerships that support long term success across the region.

About JCB

JCB is a family company founded on Oct. 23, 1945, and is now one of the world’s largest privately owned manufacturers of construction, agricultural and defense equipment, with 22 factories around the world.

JCB North America currently employs more than 1,000 people and operates out of its headquarters in Savannah, Ga. JCB recently began work on a new $500 million factory in San Antonio, Texas, the biggest investment in its history. JCB’s North American division also has regional offices in San Antonio, Texas; Santa Monica, Calif.; and Miami, Fla.

JCB manufactures a range of more than 300 products for customers in 150 countries. JCB products include telescopic handlers, backhoe loaders, tracked and wheeled excavators, wheel loaders, compact excavators, skid steer loaders, compact track loaders, aerial work platforms, rough-terrain forklifts and Fastrac tractors. 

JCB photo

Gulf Coast JCB celebrated the grand opening of its new full-service dealership with a ribbon-cutting ceremony.

JCB photo

JCB is a

Aggregate Production and Recycling Section

SX-EW Technology Powers Taseko Mines Project

Taseko Mines’ Florence Copper project featuring Metso’s copper solvent extraction and electrowinning (SX-EW) technology is ramping up its commercial operations in Arizona.

The successful harvesting of the first copper cathodes at the end of February 2026 is an important milestone for Taseko Mines and Metso, marking the first new greenfield copper production in the United States since 2008.

The project caters to the rapidly growing copper demand while supporting the transition toward more environmentally responsible copper production in North America.

“This represents a landmark achievement for the Florence Copper team and a major milestone for Taseko, as we continue our journey to become a leading North American copper producer,” said Stuart McDonald, president and CEO of Taseko Mines.

Metso’s delivery to the Florence Copper project consists of a modular VSFX solvent extraction plant and main process equipment for the electrowinning plant. Florence

Copper has a nameplate capacity of 85 million lbs. of LME Grade A copper cathode per year.

“We are excited to congratulate Taseko Mines and the Florence Copper team on this important milestone. It’s an honor to support their success with proven Metso Plus technology designed to maximize resource efficiency and reduce environmental footprint. This aligns perfectly with our mutual dedication to sustainability and operational excellence,” said Mikko Rantaharju, vice president, hydrometallurgy and thermal processing of Metso. “Moreover, this delivery is the first of its kind to the United States and holds tremendous value for Metso as we expand our offering and installed base in the region.”

“Metso’s nearby Mesa, Arizona, service center and aftermarket team will work closely with the customer to ensure reliable, safe operation long after commissioning and maximize performance across the full equipment life cycle,” said Martin Karlsson, vice president, sales and services, USA. For more information, visit metso.com. 

Metso’s

Metso photo

Taseko Mines’ Florence Copper project featuring Metso’s copper solvent extraction and electrowinning (SX-EW) technology is ramping up its commercial operations in Arizona.

Metso photo

Metso’s delivery to the Florence Copper project consists of a modular VSFX solvent extraction plant and main process equipment for the electrowinning plant.

FROM REDUCTION TO SHAPING

BUILT TO CONNECT

astecindustries.com

806-364-5687

613 S. 4th Ave Mansfield, TX 76063 817-473-2110

3871 IH - 10 W. Freeway Exit 693 Columbus, TX 78934 979-732-6902

www.texasbearing.com

Vario Impact Sizer Enhances Precision Material Sizing

Compliance with the required material size is a decisive factor for ensuring efficient processes in opencast mining operations.

With the Vario Impact Sizer (VIS), Wirtgen offers a system that scores top marks in terms of flexibility, precision and adaptability, according to Wirtgen.

It enables machine operators to reliably control the maximum particle size and particle size distribution, even under constantly changing operating conditions. Extensive evaluation of the system in practice has confirmed its effectiveness, particularly in coal and bauxite mining operations.

Selectable Settings

The core of the VIS is a split baffle plate mounted directly on the cutting drum housing. This plate is equipped with two primary adjustment mechanisms that enable precise control of the material that passes through the system, according to Wirtgen. The variable gap between the plate and the cutting drum is the first adjustment mechanism: this distance can be adjusted in five stages to control the amount of additional crushing and thus change the particle size.

A smaller gap results in extra crushing and thus finer material, while a larger gap results in coarser material. The adjustment is made by simply enlarging or reducing the gap and securing the plate with pins, which takes around 10 minutes.

The second adjustment mechanism relates to the holes in the scraper. Depending on the specific requirements of the operation, they can be opened or closed in four different settings by means of covers.

These two mechanisms complement the basic adjustment options of the Surface Miner like the advance speed of the machine, the speed of the cutting drum, and the cutting depth. In combination with the VIS, this results in an extremely high level of control over the maximum particle size.

Vario Impact Sizer

Machines in cut-to-ground or windrow applications often produce material that exceeds the required maximum particle size. This is where the VIS comes in — the system is designed to fulfill precisely this requirement by influencing and limiting the maximum particle size. Finer material passes through the sizer and leaves the crushing process while coarser material is crushed until it can also pass the sizer.

The VIS has proven itself in both coal and bauxite mining applications and effectively controls the size of the material produced to ensure that it meets the specified requirements, according to Wirtgen.

One of the advantages of the VIS is its seamless integration into the machine. The VIS is mounted directly on the cutting drum housing and integrates seamlessly into the material processing process. Furthermore, the system is highly adaptable.

The variable settings enable reliable crushing of a wide range of rocks and minerals. The VIS is particularly suitable for brittle and porous rocks and minerals such as coal, bauxite or chalk, according to Wirtgen.

The construction of the VIS ensures that it can withstand the harsh conditions in mining and meets all requirements for durability and stability, even at high throughput rates.

Use in Opencast Mining

The VIS is available for the 220 SM(i) 3.8. Particle size control is achieved through the interaction of standard machine settings and the VIS settings. The standard machine settings include the machine’s advance speed from 0 to 275 ft. per min. The cutting drum speed also is adjustable with six standard settings on board.

The cutting depth is adjustable from of 0 to 13.8 in. The settings of the VIS consist of the five baffle plate gap settings from 0.86 in. to fully open and the four cover plate opening settings, which can be adjusted from fully closed to fully open.

This wide range of combinations offers almost unlimited possibilities for influencing the maximum particle size and the particle size distribution, according to Wirtgen.

Practical Examples From Coal, Bauxite Mining Applications

In the meantime, the performance of the VIS has been evaluated in various mining regions. In coal mining in India, the system showed improvements in the control of coal particle size. Specific settings were used to achieve a target size of less than 3.9 in. In bauxite mining, the VIS delivered impressive results in the Boffa and Boké regions of Guinea. During mining in Boffa, the sizer was opened fully to enable a cutting depth of 11.8 in. and a high advance speed,

enabling maximum performance for the achievement of high productivity. In Boké, the settings were adjusted to a material size of less than 3.9 in., demonstrating the system’s ability to adapt to different types of bauxite and different crushing behaviors. Clearly noticeable in practice: the settings have to be carefully adapted to the requirements since additional crushing reduces the throughput rate.

Assists Operators

The VIS provides machine operators with a tool that gives them precise control over the maximum particle size, according to Wirtgen. The system settings have a direct impact on key performance parameters: particle size distribution, production output, fuel consumption, tool wear and stress on parts and components.

By specifically adjusting the configuration, the operator can always achieve an optimal balance between material requirements, process stability and overall cost-efficiency. The VIS thus confirms its role as an effective tool for efficient material size control in contemporary opencast mining scenarios.

For more information, visit wirtgen-group.com. 

Wirtgen photo

The Surface Miner 220 SM(i) mining coal using the windrow method.

Wirtgen photo

The core component of the Vario Impact Sizer is a split baffle plate mounted directly on the cutting drum housing.

Wirtgen photo

For demonstration, the plate on the left is open; the plate on the right is closed.

NEO MR 100

versions: the electric E-D tool-free, safe crusher op automatic crusher gap ad all-new benchmark in the

machineisamazinglyﬂex impact crusher! With its c Efﬁcient when & where xiblefastandversatileTheM compact dimensions and low - the MOBIREX you need it MR100NEOsetsan transport weight, this MR 100 NEO mobile NEO: ready, set, crush!

machine is amazingly ﬂex m oc.puorg-negtriw.www RIVE or direct D-DRIVE. The M pening in 30 seconds. Choose djustment or Lock & Turn Qui e compact class - with highlig TN 37013,Antioch·ayW 30 Dana xible, fast and versatile The M nnameelk-oen-i001-rm/ OBIREX MR 100 between two drive ck Access for ht features such as elephone: (615) 501-0600 T· MR 100 NEO sets an Oklahoma City, OK 405-495-7820 Tulsa, OK 918-438-1700 McAlester, OK 918-310-1550

Abilene, TX 325-692-6334

kirby-smith.com

Amarillo, TX 806-373-2826

Chico, TX 940-678-5046 Dallas, TX 214-371-7777

Ft. Worth, TX 817-378-0600

Hewitt, TX 254-261-1370

Lubbock, TX 806-745-2112

Odessa, TX 432-333-7000

Van Alstyne, TX Coming Soon!

Corpus Christi, TX 361-289-0066

Laredo, TX 956-725-0066

San Benito, TX 956-361-0066 Victoria, TX 361-576-0066

Vinton, TX 915-541-0066 Houston, TX 713-247-0066 San Antonio, TX 210-310-0066 Bryan, TX 346-621-0066 www.nuecespower.com

1090 W 2181 N Salt Lake City, UT 84116 801-322-1300

atlasmachinery.us

6565 Smith Avenue Newark, CA 94560 510-400-5024

1535 SE 25th Street Oklahoma City, OK 73129 405-310-8700

6839 W. Chicago Street Chandler, AZ 85226 480-393-5840

5401 S. Arcadia Avenue Tucson, AZ 85706 520-307-1435

Equipmentshare.com

Safe Digging Tips for Summer Construction, Utility Work

Summer is a critical time for those in construction and utility work. This busy season depends on crews’ productivity as they work around storms and high temperatures.

But the season’s unpredictable weather isn’t the only thing impacting safety and productivity. The possibility of striking a buried utility means potentially hurting crew members, delaying the project, damaging critical infrastructure and cutting off critical access to that utility as it undergoes repairs.

That’s why the Gas Technology Institute (GTI) identified vacuum excavation as a best practice. Since vacuum excavation is a best practice for safe digging, the TRUVAC team shared a few more safe digging tips for summer construction and utility work and also included a couple tips from GTI:

1. Make a plan. To ensure safe digging practices, plan for differing hypothetical situations including water content and debris.

Being prepared to adapt to various ground conditions not only keeps utility work and digging safe, but it shortens the amount of time needed to pivot.

2. Call 811. Safety is important, and by calling 811, you can understand the location of underground utilities, reduce the risk of dangerous situations and prevent costly repairs and fines. Calling the number (or submitting a request online) is completely free, and utility companies will arrive to mark the site of underground lines.

3. Follow safety protocols. With there being less need for manual labor, worker safety is promoted. However, making sure operators use proper PPE is still necessary regardless of site conditions and temperature. All utility work and digs need to follow proper safety protocols to keep digging safe.

4. Conduct proper maintenance. Over time and through the seasons, debris accumulates on hydrovac tanks and is hard to remove, with dry, sandy soil creat-

ing the most build-up. To prevent extreme build-up in the summer months, store vehicles in dry environments and prioritize routine maintenance of vehicles.

5 Use the right equipment. DigRight is a patented technology of TRUVAC that increases safety, helps adhere to industry recognized best practices and allows crews to focus on the job — all at the push of a button. DigRight technology — coupled with multiflow water pump features — allows you to select a maximum water pressure limit to prevent the pressure from exceeding site or industry requirements.

DigRight is available on the TRUVAC Paradigm, FLXX and HXX models. DigRight helps decrease wear and tear on check, unloader and relief valves by avoiding bypassing water and saves fuel and money by eliminating wasted energy.

6. Beware of pressure and temperature. GTI noted in the “Vacuum Excavation Best Practice & Guideline” that if heat-

ed water is used during excavation, the temperature and pressure of the water shouldn’t exceed 115 degrees fahrenheit and 2,500 psi respectively. In addition, the pressurized air or water wands shall never remain motionless during excavation. Aiming directly at the underground facilities shall be avoided at all times.

7. Keep the right distance. GTI also recommended keeping a distance of at least eight inches between the end of the nozzle and the underground facility or subsoil. The nozzle shouldn’t ever be inserted into the subsoil while excavating within the “tolerance zone.”

As summer digging projects start to increase, calling 811 and prioritizing safe excavation practices helps protect crews and infrastructure. With precision tools like DigRight technology from TRUVAC that help support industry best practices, contractors are able to dig safely and more efficiently. For more information, visit TRUVAC.com/DigRight. 

TRUVAC photo Summer is a critical time for those in construction and utility work.

TRUVAC photo

The possibility of striking a buried utility means potentially hurting crew members, delaying the project, damaging critical infrastructure and cutting off critical access to that utility as it undergoes repairs.

(2263)

97230 800-221-8512 Nueces Power Equipment www.nuecespower.com Corpus Christi, TX 316-289-0066 Victoria, TX 361-576-0066 San Benito, TX 956-361-0066 Laredo, TX 956-725-0066 Houston, TX 713-247-0066

San Antonio, TX 210-310-0066 Bryan, TX 346-621-0066

Belgrade, MT 800-422-9976 Bend, OR 541-688-3172

Billings, MT 406-252-2158 Boise, ID 208-336-8570

modernmachinery.com

Columbia Falls, MT 406-755-5540 Eugene, OR 541-688-7321

Jerome, ID 208-324-4522 Kent, WA 253-872-3500 Missoula, MT 406-523-1100 Pocatello, ID 208-233-5345

Portland, OR 971-222-1710 Rochester, WA 360-273-4284 Spokane, WA 509-535-1654

warriormachinery.com

caequiptx.com

945 E. McGregor Drive McGregor, TX 76657 254-293-6454

Project Reduces Congestion, Enhances Safety On SR 99

Caltrans District 6 representative Christian Lukens told Construction Equipment Guide the work will “improve traffic flow, enhance freight and local traffic and support economic growth.” He added, “The project will also add modern safety features, including sidewalks, bike lanes and upgraded traffic management systems.”

Improving Connectivity

“The new interchange will make it much easier for drivers and trucks to access SR 99, reducing congestion on nearby surface streets and improve traffic flow throughout the area,” Lukens said. “It also enhances east-west connectivity, which is vital for daily commuters and for truckers moving freight and agricultural goods, a key component of Tulare County’s economy.”

The construction team gained insight on the work plan after interacting with the public, as strong feedback favored preserving the Paige Avenue Interchange.

During work on the new interchange at Commercial Avenue, the team kept Paige Avenue ramps open. The approach was strongly advocated for by the city of Tulare and other government entities.

The contracting team factored in some local events when planning construction. Tulare hosted the World Ag Expo in an area adjacent to the project. This event delayed the project by two months while getting a Federal Aviation Administration permit delayed the project an additional two months.

The project also took some steps regarding the environment.

“The work will lower greenhouse gas by reducing congestion and vehicle idling on the busy SR 99 corridor,” Lukens said. “The project also supports greener travel options by adding 2.6 miles of new bike lanes and 1.4 miles of sidewalks, making it easier for people to walk and to bike.”

Security Paving has used 80,000 tons of asphalt and 19,000 cu. yds. of concrete on the project. The construction team has used 60,000 lbs. of steel and moved 195,000 lbs. of dirt. The team used post-tensioned tendons to control deflec-

tions in the concrete while maintaining its strength in the bridge.

“Before we started, this was empty farmland; we had to drill pilings about 45 feet deep to support the bridge,” TJ Mattivi, central division area manager for Security Paving, told Construction Equipment Guide. “We built a cast-inplace bridge. Since it was a new bridge, we did not have to manage traffic, so the work was accomplished quickly.”

ARTBA Reports Infrastructure Spending Down in 2026

INFRASTRUCTURE from page 1

“The monthly value of awards can be volatile in the first quarter as state and local governments in general put out less work,” according to ARTBA’s analysis.

“Totals can also vary depending on the mix of projects,” the association reported in adding that 25 states increased the value of project awards this March.

States with the highest value of awards last month included: California, Illinois, South Carolina, Texas and New York.

ARTBA noted that states with major monthly percentage gains included: District of Columbia, Delaware, Tennessee, Vermont and Maine.

Top markets last year were California at $15.7 billion, Texas at $15.5 billion, New York, $10.4 billion, Florida, $9 billion and Maryland, $8 billion.

How, Where States Apportioning Project Funds

Iowa DOT announced in April it was supporting nearly $980 million in improvements this fiscal year.

Across the state, crews will focus their efforts on projects that impact motorists and truckers for both local and statewide movement, the agency said.

“Iowa’s interstate and primary highways … are an essential part of our personal mobility and our state’s economy,” the agency said. “As we invest in these projects, we want to help Iowans safely navigate construction and work zones.”

Frank Leong, district construction engineer, Iowa DOT, said the busy 2026 construction season could see more than 100 different projects during key construction months.

In 2025, the district completed some 80 projects in the season that stretched through every month of the year, said the District 1 construction engineer.

That included everything from covering drainage work to repairing pavement and pavement markings all the way to the electrical systems.

“And we also do about five bridge replacements a year in central Iowa with anywhere from 12 to 14 rehabilitation projects,” he added.

That involves anything from resurfacing to patching, “or just getting the crack sealed so that we don't have moisture problems on the bridges,” said Leong.

Iowa DOT said the Iowa Transportation Improvement Program five-year plan forecasts an investment of $4.3 billion in state and federal funding. The monies will go to highway right of way and bridge construction throughout the state, according to the agency.

Michigan’s Gov. Gretchen Whittmer said

“I’m sorry and you’re welcome” in warning drivers they’d see more orange cones this summer.

State leaders agreed on a funding deal that would boost spending on roads and bridges by at least $1 billion starting this year, reports mlive.com. That funding could be even higher in the years to come as revenue comes in from taxes on gas, marijuana and corporate profits, the news outlet said.

“Drivers, when you hit the road this spring and summer, we ask that you slow down and pay attention, there’s Michiganders at work here,” Whitmer said. “Construction season is officially open and we’re going to continue to fix the damn roads in Michigan.”

According to the governor’s office, Michigan DOT will repair approximately 2,000 lane mi. of state-owned road and nearly 100 bridges this season.

That brings totals to approximately 26,500 lane mi. and almost 2,000 bridges fixed over eight years. Those totals don’t include local roads.

Among the most significant MDOT projects on schedule this year are repairs on I696 in Oakland County, I-96 and I-94 in Wayne County, reported mlive.com.

U.S. 127 in Ingham and Clinton counties, U.S. 31 in Grand Traverse County, M-46 in Muskegon County and I-69 in Genesee County also made the list.

Minnesota Public Radio revealed that more than 200 projects are planned statewide this year to improve and maintain transportation infrastructure.

In a May press conference, state safety officials highlighted big projects and warned drivers to be careful in construction zones.

Hoping this will be the last year of construction on Interstates 394 and 94 in Minneapolis, MPR.org said lanes will close in each direction

In addition to lane closures, some ramps and bridges also will be shut down, causing backups through November, said the news agency.

The John Ireland Boulevard Bridge over I-94 will be rebuilt. The hoped-for completion is before the October Twin Cities Marathon in October.

MPR.org said the Minnesota State Patrol reported people driving into wet cement or nearly hitting construction workers and asked drivers to take care.

“Sometimes the delays and detours can test our patience,” said Lt. Mike Lee. “But remember this: Impatient and risky driving behaviors are not tolerated.”

ÂTaking Care of the SystemÊ Is Goal for State DOTs

AASHTO noted that the Utah DOT will start work on 176 new construction projects

this year with a total worth of $2.8 billion. Those projects are all in addition to the ongoing work on 57 current projects within the state.

New contracts include the $225 million SR-177 West Davis Highway extension project in Davis County.

A $43.2 million effort is planned to extend the S-Line streetcar line in Salt Lake City. And at $621 million, the 2100 North Highway construction effort in Utah County will launch this construction season.

“Every project we start is about taking care of the system Utahns rely on every day,” said Lisa Wilson, Utah DOT deputy director.

The work is focused on making travel safer, more reliable and more accessible, she said.

“At the end of the day, our goal is simple: help people get where they’re going safely.”

The Wisconsin DOT has plans to work on more than 400 highway improvement projects during the 2026 construction season.

Adobe Stock photo

At the end of the day, the goal is to get people moving and to their destinations safely and securely, say state officials.

AASHTO said the list includes finishing up the I-41 rebuild in Milwaukee County and reconstruction of WIS 21 between Omro and Oshkosh. Reconstruction of the I39/90/94 bridges over the Wisconsin River in Columbia County also is planned.

As teams ready for another construction season the safety of work crews, industry partners and the public are priority, said Kristina Boardman of the state DOT.

A “record-breaking” $3.4 billion construction season launches this spring in Ohio. It includes a total of 977 new projects, according to AASHTO.

For the 2026 season, 739 bridges and approximately 4,562 mi. of roadway are set for improvements, with 174 safety projects also set to begin.

“As a state that makes and moves things, we must have a safe transportation system that is well maintained,” said Gov. Mike DeWine.

It’s “a testament to [our] focus on building a more resilient transportation system and saving lives,” added Pam Boratyn, Ohio DOT’s director.

“This investment positions Ohio as the

heart of the nation’s supply chain and continues to fuel the state’s economic engine.”

The Arizona DOT will continue or start work on a variety of highway improvement projects.

Jobs that have been in winter shutdown, including the $15.8 million I-17 wildlife crossing south of Flagstaff, are resuming, reported AASHTO.

Arizona DOT noted that crews finished most of the I-17 wildlife crossing bridge located 12 mi. south of Flagstaff. Work this spring will include installation of eight miles of new wildlife fencing along the highway, an effort that should wrap up by fall.

The state agency said it also plans to begin work on a $19.4 million State Route 64 Improvement Project north of I-40 in Williams. That contract will resurface 19 mi. of SR 64 between the I-40 interchange and Pipeline Road, add several new left turn lanes and improve turnouts.

During a National Work Zone Awareness event in April, Missouri DOT Director Ed Hassinger predicted 1,000 work zones would be active this summer.

“I’d say four years ago, it might’ve been half of that,” Hassinger told television station KSHB.com.

The director said funding from a gas tax Missouri increased incrementally from 2021 to 2025 is helping pay for the projects.

According to KSHB, the department also is catching up on work delayed during the COVID-19 pandemic.

Finally, the agency is in the midst of a years-long project to expand 200 mi. of I-70 from two to three lanes.

Some projects will be on pause in Kansas City, Mo., during World Cup matches to ease congestion. The DOT will resume projects once matches end.

Greg Bolon, district engineer of MoDOT, said the agency typically has between 100 to 110 projects going on in the Kansas City area.

“We will have about 14 of those projects that we’ll have limited construction basis on,” Bolon said, to “make sure we have all the lanes open we possibly can.”

Next door in Kansas, KDOT also is working to prevent traffic issues with construction around scheduled matches this summer, reported KCTV5.com.

Mike Rinehart, KDOT district engineer, said closures will not be scheduled on major highway routes during the World Cup, from early June to mid-July.

Currently, the K-5 and the 18th Street bridges in Wyandotte County, Kan., are closed and will remain so until necessary work is completed.

In Johnson County, work on the I35/Gardner Road bridge will continue and the bridge is open to traffic until a new structure opens in late 2027, said KCTV5.  CEG

SECTIONAttachments

Foxx Loaders Expands Lineup for Range of Applications

Foxx Loaders introduced its expanding lineup of Foxx attachments — premium attachments engineered to deliver maximum performance across a wide range of applications.

Designed to seamlessly match machine and attachment, Foxx attachments are built to meet the demanding needs of today’s contractors, farmers, landscapers and land management professionals. From construction and agriculture to vegetation management and right-of-way clearing, Foxx offers versatile attachment solutions that arrive jobsite-ready directly from the dealership.

The Foxx Attachments lineup is available for Foxx compact wheel loaders, miniskid steers, telehandlers and telescopic wheel loaders using common attachment interfaces for enhanced compatibility and ease of operation.

With a focus on durability, productivity and operator efficiency, Foxx continues to provide equipment solutions built to handle real-world work in demanding environments.

For more information, visit foxxloaders.com. 

Foxx photo

The CL mulcher is designed for land clearing and vegetation control.

Foxx photo

The mini-log grapple helps clear heavy logs when clearing land.

Foxx photo

Foxx offers its mower attachment, making quick work of clearing brush.

Foxx photo

The Foxx grapple attachment makes moving material such as rocks and broken limbs easy.

ESCO Introduces Vertasys Construction Tooth System

ESCO has introduced the Vertasys tooth system.

The Vertasys system is a new tooth system that features a unique vertical lock integrated into the point for in-field replacement. Locking and unlocking the point only requires a 90-degree rotation with an off-the-shelf hex ratchet, according to ESCO.

The enhanced nose profile is not only stronger than previous systems but is less susceptible to fatigue failure, allowing operation in the most demanding applications. Another feature is the specialized design that allows the same adapter style to be used on both wheel loaders and excavators with lower weld requirements than conventional designs.

Key advantages include:

• locking mechanism with stronger points and adapters;

• increased point, adapter and lock strength delivers greater system reliability; •

and multi-use

(360) 756-6572

(509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934

Spokane (509) 536-7300

VATO C OUR EX A

Crews Drill Bridge Pilings 45 Ft. Deep Across Formerly Empty Farmland

The work on the International Agri-Center/Commercial Avenue Interchange is expected to ease congestion and improve safety along SR-99.

TULARE from page 28

The new bridge will be 132 ft. across and 250 ft. long. Workers will construct two 12-ft.-wide lanes in each direction, median island shoulders and bike lanes on either side. Colored textured concrete will add a distinctive visual element to the work.

Workers have relied on standard equipment for the project, including articulated trucks, bulldozers, excavators, scrapers, front-end loaders, skid steers, rollers and paving machines.

The construction team used smart-traffic technology to improve traffic flow on SR 99 near the project. This included real-time traffic monitoring and ramp metering systems.

The construction team crafted a detailed safety plan for the work to protect both motorists and workers. The plan included lining up a detour of SR 99 onto local streets while the workers were installing and removing falseworks.

Mattivi believes that motorists will notice the difference when the project is complete, especially during the International Agri Center Expo, which often attracts 100,000 people.

“In the past, traffic would be backed up for miles during the Expo,” he said. “This project and the newly configured interchange will make these transitions smooth and keep traffic moving along SR 99.”  CEG

(All photos courtesy of Caltrans, District 6.)

www.wpi.com

12320 S. Main Street Houston, TX 77035 713-723-1050 Buffalo, TX 903-322-7150 Bryan, TX 979-314-1191

Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 Kilgore, TX 903-984-2011

Lufkin TX 936-243-6056

Pflugerville, TX 512-251-0013 Port Arthur, TX 409-721-5305 San Antonio, TX 210-648-4444 Tomball, TX 281-351-9016

www.powermotivecorp.com

Workers were able to build the new cast-in-place bridge quickly since few traffic management issues were involved.

Corporate Office 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900

Colorado Springs, CO 719-576-5541

Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188

Cheyenne, WY 307-634-5149 Durango, CO 970-259-0455 Albuquerque, NM 505-345-8383 Bloomfield, NM 505-324-8601 Carlsbad, NM 505-485-1700

El Paso, TX 915-872-1001 Chandler, AZ 602-986-3003 Phoenix, AZ 602-463-3772 Tucson, AZ 520-649-2858

The new bridge will be 132 ft. across and 250 ft. long. Workers will construct two 12-ft.-wide lanes in each direction.

kirby-smith.com

Oklahoma City, OK

405-495-7820

McAlester, OK

918-310-1550

Tulsa, OK

918-438-1700

Abilene, TX

325-692-6334

Amarillo, TX

806-373-2826

Chico, TX

940-678-5046

Dallas, TX

214-371-7777

Ft. Worth, TX

817-378-0600

Hewitt, TX

254-261-1370

Lubbock, TX

806-745-2112

Odessa, TX

432-333-7000

Van Alstyne, TX Coming Soon!

www.modernmachinery.com

Corporate Office

Missoula, MT

409-842-1754

Boise, ID

208-336-8670

Jerome, ID

208-324-4522

Pocatello, ID 800-829-4450

Billings, MT 800-735-2589

Columbia Falls, MT

800-434-4190

Eugene, OR

800-826-9811

Portland, OR

800-950-7779

Kent, WA

800-669-2425

Rochester, WA 800-304-4421

Spokane, WA 800-541-0754

www.clairemontequipment.com

San Diego, CA

858-278-8351

Escondido, CA

760-739-9100

Fontana, CA 909-429-9100

Imperial, CA 760-355-7700

Indio, CA

760-863-5558

San Diego, CA

858-278-8338

ALASKA

NC MACHINERY

www.ncmachinery.com

800-478-7000

Anchorage, AK • 907-786-7500

Dutch Harbor, AK • 07-581-1367

Fairbanks, AK • 907-452-7251

Juneau, AK • 907-789-0181

Prudhoe Bay, AK • 907-659-6900

Wasilla, AK • 907-352-3400

CALIFORNIA

HOLT OF CALIFORNIA

www.holtca.com

Pleasant Grove • 916-921-8969

NORTH DAKOTA

TRACTOR AND EQUIPMENT

www.tractorandequipment.com

Williston • 701-572-8377

WYOMING

TRACTOR AND EQUIPMENT

www.tractorandequipment.com

Worland • 307-347-4747

MONTANA

TRACTOR AND EQUIPMENT

www.tractorandequipment.com

Billings, MT • 406-656-0202

Billings-Sgt. • 406-245-4426

Bozeman • 406-585-5800

Great Falls • 406-761-7900

Helena • 406-442-2990

TEXAS

MUSTANG CAT

mustangcat.com

Beaumont • 409-892-8412

Bryan • 979-775-0639

El Campo • 979-543-3389

Houston • 713-460-2000

Lufkin • 936-639-5551

WASHINGTON

NC MACHINERY

www.ncmachinery.com

800-562-4735

Seattle • 425-251-5800

Chehalis • 360-748-8845

Fife • 253-896-0878

Monroe • 360-805-6000

Mt. Vernon • 360-424-4292

Wenatchee • 509-886-5561

Yakima • 509-248-2371

SECTION Trucks & Trailers

Stellar Levels Up Popular Product Lines With 2026 Launches

For model year 2026, the TMAX lineup features a new high-intensity LED taillight system designed to improve visibility and awareness on the job site.

Stellar introduced a redesigned EC3200 electric service crane. The EC3200 now features a nested boom design.

Stellar Industries is advancing two of its core product lines with updates to the TMAX mechanic truck and EC3200 electric service crane.

2026 TMAX Mechanic Truck

Stellar TMAX mechanic trucks are built for durability and efficiency in demanding field conditions, according to Stellar. For model year 2026, the TMAX lineup features a new high-intensity LED taillight system designed to improve visibility and awareness on the job site. The taillights also feature a cascading turn signal for more visibility in demanding environments.

In addition to the new taillights, Stellar continues to expand the TMAX platform’s flexible storage capabilities. Building on the introduction of the adjustable shelving, the 2026 models offer additional options for tool storage and control panel mounting.

This adaptable design allows operators to configure their truck to meet the specific demands of their work without compromising the structural integrity of the body. By eliminating the need to drill in compartments, the TMAX design helps prevent corrosion, leaks and long-term wear while protecting valuable tools and equipment, according to Stellar.

EC3200 Electric Service Crane

Stellar also introduced a redesigned EC3200 electric service crane. The EC3200 now features a nested boom design. This update provides a lower overall profile for the crane, allowing operators to access tighter workspaces with greater ease.

The new boom design also reduces the crane’s overall weight by approximately 130 lbs., improving payload capacity while maintaining the lifting performance and reach operators expect. The result is a more balanced crane design suited for space and weight sensitive applications, according to Stellar.

Available for integration with Stellar TMAX mechanic trucks, the EC3200 electric service crane offers a cost-effective alternative to larger hydraulic cranes while still delivering the performance needed to handle a wide range of service tasks in the field, according to Stellar.

Turning Feedback Into Features

“These recent product updates are a direct result of customer feedback and real-world application,” said Tim Worman, director of product management and inside sales. “By refining key features like visibility and payload, we’re helping our customers work more efficiently without adding unnecessary complexity to their equipment.”

With these latest enhancements, Stellar continues to evolve its product lineup to support the changing demands of service professionals across industries. Customers can place orders for both the 2026 TMAX mechanic truck and the EC3200 electric service crane now.

Stellar Industries photo

Felling Trailers Names 2026 ‘Trailer for a Cause’ Beneficiary

Felling Trailers Inc. announced Henry’s Heroes as the 2026 beneficiary of the 14th annual Trailer for a Cause auction.

This time-honored tradition involves auctioning a custom Felling FT-12 Pan drop deck trailer online, with 100 percent of the winning bid donated to the selected nonprofit organization.

In the past 14 years, the Trailer for a Cause auction has raised more than $57,000 for nonprofits such as the American Brain Tumor Association, Special Olympics, Pockets of Hope and Backing the Blue. The goal is to raise awareness for organizations making a difference and support their work.

The 2026 Trailer for a Cause auction beneficiary, Henry’s Heroes, was selected by the Felling Trailers’ employees in the form of a vote. Team members cast their votes for the organization of their choice in early spring this year. When the last of the votes were tallied, Henry’s Heroes held the popular vote.

“This is incredible news, and thank you so much! On behalf of all of us at Henry’s Heroes, we are truly honored to have been selected as the 2026 Trailer for a Cause beneficiary,” said the Henry’s Heroes Team.

“We are excited to partner with you on this project and can’t wait to see the FT-12 Pan utility trailer come to life, representing Henry’s Heroes,” said the Heroes Team.

“When our team cast their votes, and Henry’s Heroes rose to the top, I wasn’t surprised,” said Brenda Jennissen, president of Felling Trailers Inc. “As a mother, I was moved. Some of them know firsthand how a NICU journey can turn a family’s world upside down and how unexpected contributions make an impact. The work that the Henry’s Heroes team does to ensure no family in our region has to walk that path alone is exactly the kind of cause our Trailer for a Cause tra dition was built to sup port. We are proud to put Felling Trailers’ craftsmanship behind an organization doing such meaningful work for families right here in our own backyard.”

Henry’s Heroes is a Central Minnesota-based non profit organization dedicated to supporting families navigating the

emotional and financial challenges of a Neonatal Intensive Care Unit journey.

The Henry’s Heroes team provides various forms of assistance to the NICU families they serve, including direct financial donations to help offset the real-world costs of a NICU stay, thoughtfully curated care packages to bring comfort and encouragement during long hospital stays and community outreach to connect families with resources and a network of people who understand the road they are trav-

eling.

Felling Trailers is proud to support an organization that gives so holistically and generously to families in Central Minnesota.

A mid-fall 2026 auction is being planned for the Trailer for a Cause. Leading up to the auction, Felling Trailers will collaborate with Henry’s Heroes to raise awareness about the work they do and the families and community members they serve throughout central Minnesota and beyond.

For more information, visit felling.com. 

The Right Body for the Job.

MAC Trailer is the industry leader in dump truck bodies, delivering durable, high-performance solutions that work as hard as you do. With production in full swing, expert support, and a commitment to quality, now is the time to put MAC Trailer to work for you.

SAMPLE SAMPLE

NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE

Joseph Fazzio Inc.com • 856-881-3185 N.J

Here' s how the BARGAIN ADS Work:

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $140 per ad, $65 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 21,163 Construction Equipment Buyers in the Western States. For more information, call Construction Equipment Guide today at 800/523-2200

M.H. Eby Announces New Distributors in Pa., Utah, La.

M.H. Eby Inc. announced the addition of three new partners to its North American distributor network.

These new partnerships expand Eby’s truck body distribution and service coverage for aluminum truck body solutions and upfitting partners that strengthen service coverage in key regional markets.

The newly appointed distributors are:

• Robinson Brothers — Baton Rouge, La., 7081

• John Bonham Road Equipment & Supply — Honesdale, Pa., 18431

• Cowboy Upfitters — Ogden, Utah, 84401

These additions reflect Eby’s continued investment in building a strong, servicefocused distribution and upfitter network. By partnering with established upfitters and equipment providers, Eby is positioned to improve product availability, technical support and customer responsiveness across multiple regions.

WANTED (KY): CATERPILLAR D10N CRAWLER DOZER N & R EMAIL: ELNASRM@GMAIL.COM; PHONE: 502-407-8678

WANTED: CATERPILLAR TH63 TELEHANDLER WITH ENCLOSED CAB. IT CAN HAVE A BAD MOTOR. I DO HAVE A TH62 WITH A BAD TRANSMISSION BUT GOOD MOTOR.

EMAIL:CRAIGBERENS944@GMAIL.COM; CALL OR TEXT 6I6-8I3-3642

WANTED: CATERPILLAR TH63 TELEHANDLER WITH ENCLOSED CAB. IT CAN HAVE A BAD MOTOR I DO HAVE A TH62 WITH A BAD TRANSMISSION BUT GOOD MOTOR.

EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: 616-813-3642 – CALL OR TEXT.

WANTED: JOHN DEERE 550K LGPLGP CRAWLER DOZER. WANT TO BUY BULLDOZER 550KLGP JOHN DEERE ENC CAB SIX WAY UNDER 600 HOURS, REAL HOURS METER AND FRAME NEAR VERMONT OR NEW YORK. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975.

WANTED (NE): DODGE RAM 1500 BOXTRUCK/VAN TRUCK. EMAIL: JOSAMUELS315@GMAIL.COM

WANTED: CASE 580SE BACKHOE LOADER. EMAIL: WILMANSDIMI@HOTMAIL.COM

WANTED: CATERPILLAR 988K STRAIGHT EDGE GP FINISH PRODUCT BUCKET. EMAIL: DUBOISLIVESTOCK@GMAIL.COM; PHONE: (207)-282-4445

WANTED: JOHN DEERE 850J LGP CRAWLER DOZERS. WANT TO BUY BULLDOZER 850JLGP SIX WAY ENC CAB WITH WINCH 2005 AT 2012 REAL HOURS UNDER 900. THANKS, YOU HAVE MY EMAIL FOR PICTURE. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA

WANTED: PART FOR CATERPILLAR CRAWLER DOZER - 943 CAT SPRING FOR TRACK ADJUSTER PART# 7P1675, SERIAL # 19Z00380. PETE 631-774-1905

EMAIL: LIEARTH3@AOL.COM; PHONE: PETE @ 631-774-1905.

WANTED (WORLDWIDE): LIEBHERR WHEEL LOADER. EMAIL: MABAT_560@YAHOO.CO.UK

WANTED (WA): CATERPILLAR BACKHOE LOADERS, ALL MODELS. EMAIL: JOHNLEWISDAN1@GMAIL.COM PHONE: (425) 217-6188.

EMAIL: EKTRADINGLLCOMPANY@GMAIL.COM; PHONE: 346-469-2517

WANTED (CA): HITACHI ZAXIS450LC EXCAVATORS. LOOKING FOR HITACHI ZX460LC, ZX470LC, ZX800LC, KOMATSU PC490LC-1. EMAIL: VIETUSAEXPORT@GMAIL.COM; PHONE: 951-777-9999

WANTED (US): INSLEY EXCAVATORS, ALL MODELS. LOOKING FOR LAGGING AND CABLE DRUMS FOR A W B INSLEY 1967. EMAIL: JCTHEDANCEMAN@GMAIL.COM; PHONE: 231-872-9117

“Expanding our distributor network allows us to better support customers at the local level,” said Craig Bonham, senior vice president of business development of Eby Truck Bodies. “These partners bring strong market knowledge, service capabilities and a shared commitment to delivering quality equipment and customer support.”

The addition of these distributors enhances Eby’s ability to serve commercial fleets, municipalities and contractors with durable, lightweight aluminum truck bodies engineered for long service life. For more information, visit mheby.com.  M.H. Eby logo

WANTED (TX): JOHN DEERE 3038E TRACTOR LOADER. EMAIL: FLYCAL01@GMAIL.COM

WANTED: JOHN DEERE 850K LGP CRAWLER DOZER, SIX WAY ENC CAB WITH WINCH UNDER REAL HOURS METER AND FRAME 3000 HOURS OR 850JLGP SAME WAY WITH WINCH UNDER $95000 CDN YEAR 2009 – 2018. EMAIL: JEANMAURICCEBOUTIN@ VIDEOTRON.CA; PHONE: 450-3468975

WANTED (AR): MECALAC 10 MCR EXCAVATOR. EMAIL: FAWCETT.HOTSHOT@ GMAIL.COM: PHONE: 870-321-9572

WANTED: ALL MODELS JCB SKID STEER LOADERS. EMAIL: JKBAKER.KOTZ@GMAIL.COM; PHONE: 907-412-0910

WANTED: LARGE PORTABLE OR STATIONARY GENERATORS IN ANY CONDITION. ALL MODELS: CAT, CUMMINS, DETROIT, MTU, PERKINS, VOLVO (DIESEL OR NATURAL GAS). CAN REMOVE IF NEEDED. EMAIL: MICHSURPLUS@GMAIL.COM; PHONE: 201-587-6300

WANTED: VOLVO L70G WHEEL LOADERS. GOOD VOLVO L70G WHEEL LOADER, L70F, L70E. EMAIL: FRANK.HORAN@ HOFFMANEQUIP.COM; PHONE: 732-674-2095

WANTED (WA): CATERPILLAR BACKHOE LOADERS+. LOOKING TO BUY USED EQUIPMENT IN THE FOLLOWING CATEGORIES: KOMATSU LOADERS WA200, WA270 WITH QUICK COUPLERS, LOW HOURS, GOOD PRICE; KOMATSU EXCAVATORS 138-8+ AND CAT 320 CL/DL/EL (ANY HOURS, ANY CONDITION; CAT GRADERS 140G/140H (1990 OR NEWER); CAT BACKHOES C/D/E/F SERIES; CASE BACKHOES - JD 310G – SG; OTHER CAT LOADERS, GRADERS, AND EXCAVATORS. PLEASE PROVIDE YEAR, HOURS, CONDITION, LOCATION, AND PRICE. EMAIL: JAN@GOLDENHORSEMACHINERY.COM; PHONE: 425-217-6188.

WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. WANT TO BUY KOMATSU BULLDOZER 475A-5 OR 475A-8 WITH BIG BLADE TO PUSH WOOD. UNDER 6000 HOURS, REAL HOURS METER AND FRAME. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 450-346-8975

WANTED (US): BOMAG PADFOOT COMPACTORS, ALL MODELS. LOOKING TO BUY FOR AN EROPS 84'' PADFOOT COMPACTOR (ANY MAJOR BRAND). EMAIL: EQUIPMENTDESTINY@GMAIL.COM

WANTED (WORLDWIDE): WESTERN RETEK CRUSHERS, ALL MODELS; LOOKING FOR ANY SPARE PARTS FOR A 2006 WESTERN RETEK IMPACT CRUSHER 1310I. EMAIL: WARRUMCONSTRUCTION@ICLOUD.COM PHONE: 317-71-07390

WANTED (CA); BUSH HOG PLOWS, ALL MODELS. NEED PLOWS- PREFER BRUSH HOG. WILL PAY TOP DOLLAR WHOLE OR PARTS. EMAIL: TOMTOMGOFORIT@YAHOO.COM

WANTED (WA): CATERPILLAR WHEEL LOADERS, MODELS FROM 908 TO 980. EMAIL: JOHNLEWISDAN1@GMAIL.COM PHONE: (425) 217-6188

WANTED (WORLDWIDE): CATERPILLAR 140K MOTOR GRADER. EMAIL: MBUSIINGE@YAHOO.COM; PHONE: 077-791-2153

WANTED (OH): CASE 580SM2 BACKHOE LOADERS. EMAIL:JERRY@VIOXEXCAVATING.COM; PHONE: 513-460-3315

WANTED (WORLDWIDE): VERMEER RTX 750 / RTX8550 EQUIPPED WITH A LARGE CUTTING WHEEL. EMAIL: RENATO.NASCIMENTO@ELEBBRE.COM PHONE: +55 11 994602266

WANTED (US): CATERPILLAR 140G MOTOR GRADERS, LOOKING TO PURCHASE A RANGE OF HEAVY CONSTRUCTION EQUIPMENT AND WOULD APPRECIATE RECEIVING YOUR BEST OFFERS FOR THE FOLLOWING MODELS, RUNNING OR NON-RUNNING: CAT WHEEL LOADERS: 950B 950E 966E 966F HITACHI EXCAVATORS: EX200LC EX270LC EX300LC EX330LC EX400LC

ALEX LYON & SON AUCTIONEERS

www.lyonauction.com

315-633-2944

• Timed Online (TX)

May 26 – June 9, 2026

For: Job Completion Major Concrete Contractor

• Syracuse, NY

Tues., June 2, 2026

For: Estate of Timothy J. Patrick Auction

• Port Lavaca, TX

Thurs., June 4, 2026

For: Retirement Auction: RLB Contracting Inc.

• Timed Online (NJ)

June 7 - 21, 2026

For: Construction & Utility Equipment Auction

• Houston, TX

Tues., June 9, 2026

For: Late Model Earth Moving Equipment Auction

RITCHIE BROS. AUCTIONEERS

www.rbauction.com

402-421-3631

• Texas Regional Auction: June 17, 2026

• Northeast Regional Auction: June 23, 2026

• Rocky Mtn. Regional Auction: June 23, 2026

ABSOLUTE AUCTION & REALTY, INC.

www.AARauctions.com

800-243-0061

• Online

Ends May 31, 2026

For: Town of Mount Hope Surplus Vehicle Auction

• Online

Ends May 31, 2026

For: Spring Equipment #5 Auction

• Online

Ends June 1, 2026

For: New Inventory Pleasant Valley, NY Auction

• Online

Ends June 1, 2026

For: Stanford Fire Company Surplus Auction

• Online

Ends June 2, 2026

For: Fishkill, NY Bucket Truck Auction

ALLSURPLUS – A Liquidity Services

Marketplace www.allsurplus.com

214-427-1862

• Online

Ends June 4, 2026

For: Heavy Equipment, Trucks & More

• Online

Ends June 11, 2026

For: Heavy Equipment, Trucks & More

Coming Auctions

To view our complete list of upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

AUCTIONS INTERNATIONAL

www.auctionsinternational.com

800-536-1401

• Online May 18 – June 5, 2026

For: Online Auctions Closing Daily!

BAR NONE AUCTION

www.barnoneauction.com

866-372-1700

• Online Fri., June 5, 2026

For: Fontana, CA

Monthly Public Auction

• Online Sat., June 13, 2026

For: Sacramento, CA

Monthly Public Auction

• Online Fri., June 26, 2026

For: Woodburn, OR Monthly Public Auction

BIDADOO AUCTIONS

www.bidadoo.com 1-877-BIDADOO

• Online June 2, 2026

• Online June 9, 2026

BIG IRON AUCTIONS www.bigiron.com 800-937-3558

• Online Wed., June 3, 2026 For: Kennedy Farm Drainage LLC Equipment Auction

• Online Wed., June 10, 2026 For: Construction & Farm Equipment, Trucks & Trailers

CASH AUCTIONS www.cashauction.com 716-282-8466

• Online (NY) May 29 – June 8, 2026 For: Trucks, Trailers and Equipment

CIA INDUSTRIAL www.cia-auction.com 513-241-9701

• Online Tues., June 16, 2026

For: Chemviron Midwest, Inc. Live Webcast Auction

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com

765-778-9277

• Pendleton, IN Fri., June 19, 2026

For: 34th Annual Summer Equipment Auction

DUCKWALL & COMPANY, INC. www.duckwallauctions.com 918-836-3611

• Live Webcast (OK) Thurs., June 11, 2026

For: CM Heavy Machinery, LLC Public Auction

FREIJE & FREIJE AUCTIONEERS

www.freijeauctioneers.com 317-539-2895

• Clayton, IN

Thurs., June 4, 2026

For: Midwest Public Automobile Auction

• Clayton, IN Thurs., June 4, 2026

For: Summer Midwest Construction & Ag Equipment Auction

HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012

• Online (MI) May 22 – June 8, 2026

For: Spring Logging, Construction & Trucking Consignment Auction

• Online (WI) Ends June 8, 2026 For: Arcadia Farm & Heavy Equipment Consignment Auction

• Online (MN) June 9 - 15, 2026 For: Pike Construction Equipment, Trucks & Trailers Consignment Auction

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252

• Livingston, LA June 17 – 18, 2026

For: Summer Public Live Auction

• Online

Fri., June 19, 2026

For: Monthly Online Only Auction

HUNYADY AUCTION COMPANY

www.hunyady.com

800-233-6898

• Virtual Broadcast (NJ)

Wed., June 17, 2026

For: R&R Construction Co., Inc. Absolute Auction Surplus Liquidation

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• Online Wed., June 3, 2026

For: New Equipment, Attachments and More

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085

• Montgomery, AL June 16 - 18, 2026

For: 53rd Annual Summer Auction

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

• Online June 11 - 18, 2026

For: Marysville Heavy Equipment, Contractors Equipment & Vehicles Public Auction

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

• Online (MS)

Ends June 4, 2026

For: South Mississippi Auto Auction

• Pelzer, SC Thurs., June 4, 2026

For: Southeast Automobile Auction

• Cleveland, TX Thurs., June 11, 2026

For: Houston Construction Equipment & Truck Auction

• Londonderry, NH Thurs., June 11, 2026

For: Complete Liquidation: S and S Metal Recycling

• Loudon, NH Sat., June 13, 2026

For: Northeast US Live & Online Public Auction

MIEDEMA ASSET MANAGEMENT GROUP www.1800lastbid.com 616-538-0367

• Online at Reprocast.com Ends June 2, 2026

For: Construction & Heavy Equipment Auction

PETER COSTANZO AUCTIONEERS petercostanzoauctioneers.com 732-776-7222

• Online (NJ) May 20 – June 3, 2026

For: Construction & Jobsite Equipment, Tools & Vehicles Auction

PURPLE WAVE AUCTION

www.purplewave.com

866-608-9283

• Online

Wed., June 3, 2026

For: Vehicles & Equipment Auction

• Online

Thurs., June 4, 2026

For: Construction Equipment Auction

• Online

Tues., June 9, 2026

For: Government Auction

• Online

Wed., June 10, 2026

For: Ag Equipment Auction

• Online

Thurs., June 11, 2026

For: Truck & Trailer Auction

RES AUCTION SERVICES www.RES.bid 833-SOLD-RES

• Wooster, OH Sat., June 13, 2026

For: Mid-Year Equipment Consignment Auction

RITCHASON AUCTIONEERS INC. www.ritchason.com 615-444-5464

• Lebanon, TN Sat., June 13, 2026

For: Heavy Equipment, Farm Machinery, Trailers, Trucks & Commercial Vehicles

RTi AUCTIONS www.rtiauctions.com 585-243-1563

• Timed Online June 2 - 9, 2026 For: June NetAuction Edition 1

SHERIDAN REALTY & AUCTION COMPANY www.sheridanauctionservice.com 517-676-9800

• Online (MI) Tues., June 16, 2026 For: Municipal Pipe Liquidation

YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990

• Kissimmee, FL

June 4 - 5, 2026

For: Heavy Equipment Auction

• Findlay, OH June 11 - 12, 2026

For: Heavy Equipment Auction

• Atlanta, GA Thurs., June 18, 2026 For: Heavy Equipment Auction

PUBLIC AUCTION

www.duckwallauctions.com

THURSDAY, JUNE 11TH 10:00 AM CT

Bankruptcy Case No. 24-80617 - Eastern District of Oklahoma

371055 E. 980 RD. • CASTLE, OK 74833

INSPECTION: WEDNESDAY, JUNE 10TH 9:00-4:00PM

Purple Wave Auction Announces Enterprise Accounts Team

Purple Wave Auction announced the launch of its Enterprise Accounts team. This team drives strategic growth and enterprise-level engagement across key sectors including agriculture, construction, finance, government, rental and fleet, according to the company.

Focused on serving large accounts, dealers and OEMs, the team enhances outreach initiatives, delivers tailored service solutions and collaborates closely with local sales teams to strengthen both internal alignment and long-term customer partnerships.

The Enterprise Accounts Team consists of five enterprise sales managers, including Andrew Dillard, Erik Holzhauer, Jeff McGough, John Littler and Rebecca Jablonski, who are overseen by Managing Director Don Nash and Executive Sales Director John Beasley.

Andrew Dillard

Dillard primarily focuses on

relationships with construction dealers and rental companies, bringing more than two decades of experience to the team in asset management, fleet operations and equipment disposition throughout the Midwest.

“I focus on creating real value for dealerships and OEMs, supporting their efforts to strengthen brand presence in the market, while partnering with them on inventory management solutions,” he said.

Erik Holzhauer

Holzhauer is the expert for fleet operators and their equipment partners regarding all things fleet at Purple Wave, with 20 years of experience in supply

chain logistics.

“I am passionate about collaborating with customers to gain a deep understanding of their operations and business models,” he said.

“I’m always seeking opportunities to help them work efficiently.”

Jeff McGough

McGough brings more than 25 years of heavy equipment expertise to the team, with hands-on education in diesel technology and mechanics that enables him to understand how machines operate and the factors that drive their long-term value.

“I use my technical background and industry knowledge to help customers through an easy and transparent online auc-

tion experience,” he said. “I am committed to delivering honest guidance, accurate valuations and dependable follow-through.”

John Littler

For nearly 15 years, Littler has supported online auctions in the government sector, advocating for the benefits of cooperative contracting. He helped Purple Wave secure its first national award with OMNIA Partners.

“I am a supporter of sustainable initiatives and promote reuse, reallocation and recycling as critical elements of a surplus program,” he said. “I attend fleet and procurement trade shows to speak to the value of transparency and best practices in the auction process.”

Rebecca Jablonski

With 35 years of experience in the Midwest finance industry, Jablonski brings extensive knowledge of equipment financing, having held roles at Bank of the West and GE Capital. She remarkets bank-owned equipment for maximum profitability.

“Throughout my career, I have maintained one guiding principle: customer service comes first,” she said. “My dedication to my clients, paired with decades of experience in finance and remarketing, sets me apart as a trusted partner in the industry.”

Purple Wave Auction performs online, no-reserve equipment auctions serving the agriculture, construction, government and fleet industries, providing customers with opportunities to buy and sell equipment with confidence, according to the company.

For more information, visit sac@purplewave.com. 

Purple Wave Auction photo

(L-R) are Don Nash, John Beasley, John Littler, Rebecca Jablonski, Jeff McGough, Erik Holzhauer and Andrew Dillard..

ASSOCIATED GENERAL CONTRACTORS (AGC)

AGC Events Calendar:

All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place.

• Federal Contractors Conference

Start Date: Monday, June 8, 2026 (8:00 AM)

End Date: Wed, June 10, 2026 (7:00 PM) Washington, District of Columbia

• AGC EDGE Construction Supervision Fundamentals

Start Date: Tuesday, June 9, 2026 (4:00 PM)

End Date: Thursday, June 18, 2026 (8:00 PM) Online, Virtual

Training/Professional Development

• AGC EDGE Managing Risks (STP Unit 6) Thursdays

Start Date: Thursday, June 11, 2026 (10:00 AM)

End Date: Thursday, June 25, 2026 (3:30 PM) Online, Virtual

Training/Professional Development

• AGC Executive Leadership Council Annual Conference

Start Date: Saturday, June 27, 2026 (7:00 AM)

End Date: Wednesday, July 1, 2026 (7:00 PM) Ivans, Utah

• AGC EDGE Building Information Modeling Education

Program Dates: Monday, June 22, 2026 (10:00 AM) –

Thursday, June 25, 2026 (6:00 PM)

Online, Virtual

Training/Professional Development

• Webinar: Where Builders Actually Stand with A.I.: Findings from the 2026 Industry Research

Date: Tuesday, June 23, 2026

Time: 2:00 PM – 3:00 PM

Training/Professional Development

• AGC Mental Health & Suicide Prevention Forum

Date: Wednesday, July 15, 2026 (2.00 PM – 3:00 PM)

Virtual Safety and Health

• AGC EDGE Blueprint Reading Basics

Start Date: Monday, July 20, 2026 (2:00 PM)

End Date: Tuesday, July 28, 2026 (5:30 PM) Online, Virtual

Training/Professional Development

• Summer 2026 Construction Safety & Health Conference

Start Date: Wednesday, July 22, 2026 (8:00 AM)

End Date: Friday, July 24, 2026 (12:00 PM) Minneapolis, Minnesota Safety and Health

• Construction Demo Day: Pre-Construction Technology Date: Wednesday, July 22, 2026

Time: 10:00 AM – 4:00 PM

• AGC EDGE Estimate with Impact – Heavy Highway Civil Estimating

Start Date: Wednesday, July 29, 2026 (1:00 PM)

End Date: Thursday, August 6, 2026 (5:00 PM) Online, Virtual Training/Professional Development

WOMEN IN MECHANICAL INDUSTRY (WIMI) 2026 WIMI CONFERENCE

Dates: June 8 – 10, 2026

Location: Loews Coronado Bay Resort 4000 Coronado Bay Road Coronado, CA 92118

Phone: 866/994-7657

A leadership and development event supporting women in mechanical and specialty contracting with training, mentorship, and industry networking.

Description: The annual WIMI CONFERENCE will feature exceptional speakers, interactive educational sessions, industry-related roundtables and opportunities to build lasting relationships with fellow women in the mechanical industry.

A full menu of educational offerings will help you discover all the opportunities this industry has to offer.

From industry newcomers to executives, and everyone in between, this is the event to attend for all women in the mechanical contracting industry.

Suggested Attendees: All women in the mechanical industry.

For more information:

Mechanical Contractors Association of America 1385 Piccard Drive, Rockville, MD 20850

Main Phone: 304-869-5800

Toll Free Phone: 1-800-556-3653 https://www.mcaa.org/events/calendar/2026-wimi/

AGC FEDERAL CONTRACTORS CONFERENCE (FEDCON)

DATES: June 8 – 10, 2026

Venue: Ritz-Carlton 1150 22nd Street NW Washington, DC 20037

Phone: 202/835-0500

This is the premier gathering for federal construction contractors, bringing together agency leaders, industry experts, and peers to discuss policy, procurement, and project delivery challenges.

Event Overview

Audience – Federal construction contractors, agency representatives legal and risk professionals and industry decision-makers.

Format – Keynote sessions, panels, workshops and networking opportunities.

Speakers – Approximately 61 speakers across the program.

Key Features

Policy & Procurement Insights

Networking – Opportunities to connect with peers, agency leaders, and key decision-makers across the federal market. Workshops & Panels

Luxury Setting – Ritz Carlton provides a prime location with amenities conducive to professional engagement.

Why Attend?

This conference is a must-attend for anyone involved in federal construction contracting, offering: Direct access to agency leaders and industry experts

• Updates on federal policy and procurement trends

• Opportunities to network and form partnerships

• Insights into project delivery and risk management in the federal sector

For more information:

Associated General Contractors of America (AGC)

Main Phone Number: 703-548-3118

ASSOCIATION OF WOMEN CONTRACTORS (AWC)

June Member Mingle – Hosted by CONNECTUP! INSTITUTE

Date: Weds, June 10, 2026

Time: 3:00 PM – 5:00 PM (CDT)

Venue: CONNECTUP! INSTITUTE

Address: 550 Vandalia Street Ste. 230 Saint Paul, MN 55114

Registration will start on Thursday, April 9, 2026, at 7:00 AM.

Registration will end on Monday, May 11, 2026, at 5:00 PM.

If registration has closed and you still wish to attend, please Email admin@awcmn.org.

Member Mingles are our monthly networking events.

They are hosted by our members, for AWC members only.

On the second Wednesday of each month, we visit a different member’s ofﬁce for two (2) hours of open-house-style networking with your fellow industry professionals.

For more information:

Association of Women Contractors (AWC) 1337 Saint Clair Avenue, 4 Saint Paul, MN 55105

Phone: 651/489-2221

AMERICAN INSTITUTE OF ARCHITECTS

AIA 2026 CONFERENCE ON ARCHITECTURE & DESIGN

Dates: June 10 – 13, 2026

Location: San Diego Convention Center 111 Harbor Drive San Diego, CA 92101 Phone: 619/525-5000

An annual conference for architects and design professionals, featuring seminars, networking, and discussions on the latest trends, technologies, and innovations shaping the architecture industry.

AIA Conference on Architecture & Design 2026 (AIA26) will offer four (4) days of immersive learning, keynotes, architect-led tours, networking, and the industry’s largest AEC Expo. Event Overview

AIA26 is the American Institute of Architects’ premier Architecture & Design Conference, designed to deliver fresh insights, powerful connections and real solutions for the evolving AEC industry.

It brings together architects, engineers, designers, and decisionmakers for a mix of education, inspiration and networking.

Key Features

Immersive Learning: 350+ expert-led sessions across four (4) days.

Keynotes & Speakers: Visionary talks from top architects, designers, and industry leaders shaping trends and addressing challenges.

Architect-Led Tours: Exclusive behind-the scenes access to San Diego’s landmark projects, award-winning spaces, and innovative ﬁrms.

Networking: Opportunities to connect with peers, ﬁrm leaders, suppliers, and potential clients.

Expo: The largest AEC Expo with 600+ brands, product launches, interactive experiences, and one-on-one appointments. Special Events: Opening Night Party, AIA Annual Business Meeting, Awards Gala, and themed tours.

Who Should Attend?

Professionals in ARCHITECTURE, ENGINEERING, CONSTRUCTION, and DESIGN-SEEKING EDUCATION, INSPIRATION, and INDUSTRY CONNECTIONS will ﬁnd AIA26 a comprehensive platform to advance their practice and explore the future of design. For more information: American Institute of Architects (AIA) Phone: 800/242-3837 Website: https://conferenceonarchitecture.com/

Rhuems to Serve Purple Wave as Territory Sales Manager

Purple Wave Auction announced that Ross Rhuems joined the company as a territory sales manager for southeast Kansas, southwest Missouri and northeastern Oklahoma.

Purple Wave Auction is a leader in online, no-reserve equipment auctions serving the agriculture, construction, government and fleet industries, providing customers with opportunities to buy and sell equipment with confidence.

As a territory sales manager, Rhuems will be responsible for facilitating relationships with equipment owners and operators. He will work closely with customers to find the best fit for Purple Wave to assist with their equipment remarketing needs.

Rhuems’s territory includes Pittsburg, Chanute and Iola, Kan.; Carthage and Joplin, Mo.; and Miami, Bartlesville and Grove, Okla.

Prior to Purple Wave, Rhuems worked in the material handling industry. He handled fleet management for several large customers and also sold the service side of the business, getting customers set up with

planned maintenance programs.

“I am looking forward to helping people by connecting them to selling and buying with Purple Wave; it will be awesome to work on both sides of the spectrum,” said Rhuems. “I am extremely dedicated to building customer relationships and offering exceptional customer service.”

For more information, visit purplewave.com. 

Jeff Martin to Hold Calif. Sale On June 16 for Reliable Crane

“We’re excited to bring such a wide range of equipment to auction for buyers across the crane, construction, transportation and heavy equipment industries,” Jeff Martin said.

By bringing a significant lineup of equipment to market, the auction creates a strong opportunity for contractors, fleet managers, crane operators, trucking companies and equipment buyers seeking high-quality assets through a competitive auction environment.

The absolute auction will feature a mix of equipment, with an emphasis on cranes, support trucks and trailers. The equipment will remain in active use leading up to the auction, reflecting Reliable Crane Service’s ongoing maintenance standards and giving buyers the confidence that the assets are jobready, operational and maintained to meet all applicable requirements and certifications.

Among the highlighted assets are crawler

cranes, all-terrain cranes, rough terrain cranes, hydraulic truck cranes and specialty lifting equipment from well-known manufacturers, including Liebherr, Grove, LinkBelt, Demag, Wolffkran and Maeda.

This auction also will include a 2003 LinkBelt HTC 8640, a sister crane to the model prominently featured in “Terminator 3: Rise of the Machines,” starring Arnold Schwarzenegger.

Featured assets include a 2016 Liebherr LR 1300 crawler crane, a 2019 Grove GMK 6150L all- terrain crane and a 2023 Peterbilt 389 tractor truck. Other notable equipment includes Link-Belt hydraulic truck and lattice boom cranes, a Demag AC30 city crane, Shuttlelift and Grove carry decks and a Maeda MC 450C mini crane. The catalog also includes select transportation and support assets from Peterbilt and Kenworth, including truck tractors and flatbed trucks.

With approximately 160 lots available, the auction provides both scale and variety for buyers looking to expand fleet capacity, replace aging assets or acquire job-ready equipment for upcoming projects.

For more information, visit jeffmartinauctioneers.com. 

Ross Rhuems

Purple Wave Auction photo