$3.00
Published Nationally ®
Western Edition
November 22 2020 Vol. IX • No. 24
“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com
Inside
Hyundai Construction Names New President...8
Hat Creek Utilizes Bomag CR 1030 T Paver...28
ABR Battles Record Rain on U.S. 82
General contractor Austin Bridge & Roads has completed all seven bridges; cast-in-place and precast drainage extensions with head and wing walls; and 18.5 mi. of the new westbound roadway for the $71 million project on U.S. 82.
By Irwin Rapoport
Austin Bridge & Road LP (ABR) has overcome serious challenges to push forward on the Texas Department of Transportation’s highway widening project that covers 20 mi. of highway in Fannin County
CEG CORRESPONDENT
Boss Snowplow Unveils New Back Drag Plow...55
Table of Contents ................4 Paving Sectiom .......... 27-37 Trailer Section..............38-49 Snow Section ..............55-57 Business Calendar ............58 Auction Section ..........60-67 Advertisers Index ..............66
in order to complete the $71.5 million project in July 2021. The project, which began on Oct. 8, 2018, is expanding the highway on U.S. 82 from two lanes to a four-lane divided highway with a depressed median, from ½ mi. west of State
Highway 121 in Bonham, Texas, eastward to approximately 6/10 of a mi. east of State Highway 56 in Honey Grove, Texas. Other elements of the project includ the construction of seven bridges and drainage infrastructure. see AUSTIN page 64
Texas A&M Approves $35M Rec Center Project Texas A&M University’s Board of Regents has approved the construction of a $35 million recreation center on the south side of A&M’s main campus. The recreation center will be off Bizzell Street adjacent to the A&M golf course and across from Krueger, Mosher and Rudder halls. Construction could begin as early as December and is expected to be completed by June 2022. “In recent years, Texas A&M has invested heavily in several facilities designed to enhance the educational experience,” Texas A&M University President Michael K. Young in a statement. “With this new see TEXAS page 52
The recreation center will be located off Bizzell Street adjacent to the A&M golf course and across from Krueger, Mosher and Rudder halls. Construction could begin as early as December and is expected to be completed by June 2022.
Page 2 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
+OHN%EERE COM %OZERS
DEADLINES? LET ‘EM EAT DUST. With the most horsepower in its class pushing a 161� available blade, the all-new 750L delivers deadline-crushing EF CIENCY /OT TO MENTION MONEY MAKING ACCURACY THANKS TO OPTIONAL SLOPE CONTROL WHICH CAN EASILY BE UPGRADED TO OUR FULLY INTEGRATED 4MART(RADEs % GRADE CONTROL SYSTEM 4O OPERATORS CAN HOLD GRADE WITH LESS EFFORT THE JOB IS DONE FASTER AND YOU MOVE ON TO THE NEXT ONE )EY IF YOUlRE GOING TO RUN YOUR WORLD THEN run.
MOST HP IN ITS CLASS
161� BLADE
GRADE CONTROL OPTIONS
PAPÉ MACHINERY
HONNEN EQUIPMENT CO.
DOGGETT HEAVY MACHINERY SERVICES
www.papemachinery.com
www.honnen.com
www.doggett.com
Newark 510-790-3600
Rohnert Park 707-584-9161
Sacramento 916-922-7181
Gilroy 408-848-4150
French Camp 209-983-8122
Redding 530-241-4555
Fowler 559-834-4774
Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441
St. George, UT 435-652-8003 Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915
9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001
Victoria, TX 361-570-6666
Longview, TX 903-758-3326
Alexandria, LA 318-442-0455
Lufkin, TX 936-634-8801
Baton Rouge, LA 225-291-3750
Monroe, LA 318-343-8787
Broussard, LA 337-837-9481
Shreveport, LA 318-631-3090
Covington, LA 985-893-3005
St. Rose, LA 504-466-5577
Lake Charles, LA 337-430-3045
Tyler, TX 903-592-8900
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 3
"In Business for over 33 Years" www.hendrixmachineryllc.com 2019 Sullair 185D, Stk#: 12049, New, 390 hrs., 185CFM @ 100 PSIG, 2700 RPM, 125 PSI, ST226 Tires, 3 Cyl. Kubota Eng. ............$17,500
1-936-327-5430 • Email: sales@hendrixmachineryllc.com
Se Habla 2004 Komatsu D32E, Stk#: H-Bar,OROPS, Eng. Español Encl., Rear Screen, 30% Pads, 60% rest of U/C,
6 Way Blade, 3,562 hrs., 8’ 6” Wide......$24,500
2013 Cat D6T LGP, Stk#: 12411, EROPS, A/C & 2020 Hamm HD12VV, Stk#: 12472, OROPS, 6 Heat, Sweeps, Rear Screen, St./Tilt Blade, 4,717 hrs., 47" Vib. Double Smooth Drum, 3 cyl. hrs., 36" Pads, PA56 Winch, 12' 5" Wide $129,500 Perkins Eng............................................$32,500
2016 John Deere 550K XLT, Stk#: 12484, 2014 Cat 316EL, Stk#: 12386, EROPS, A/C & 2015 Cat 316EL, Stk#: 12385, EROPS, A/C & Heat, AM/FM Radio, 4,051 Hrs., 18" Bucket, 10' OROPS, 6 Way Blade, 3,946 hrs., 18" Pads, 90% Heat, AM/FM Radio, 6,022 hrs., 26" Bucket, 28" U/C, Ripper, 9' 1" Wide ..........................$69,500 4" Sticks, 28" Pads, Aux. Hyd., 90% U/C$76,500 Pads, 90% U/C ......................................$72,500
2008 Case 1221E, Stk#: 12395, EROPS, A/C & Heat, AM/FM Radio,13,918 hrs., 11' 4" Bucket, 200Bx316AZ Tires..................................$38,500
2006 Broderson IC80-3G, Stk#: 12436, 18,000 lbs., 46 ft., 2,904 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires................................$16,500
2010 Daewoo G25E-3, Stk#: 12047, 6,000 lbs., 15 ft., 4,388 hrs., 40" Forks, 48" Frame, 3 Stage Mast, 7.00x15 Front Tires, 6.50x10 Rear Tires, Propane, wt 9,568 lbs. ............................$9,500
2013 JLG /Skytrak 10054, Stk#: 11916, 10,000 2015Bomag BW211D-50, Stk#: 12486, 84" lbs., 54 ft., 7,247 hrs., 60" Forks, 74" Frame, 400x75x28 Foam Filled Tires, 4 Cyl. Cummins Eng Smooth Drum, 2,230 hrs., TR-387 Tires, 4 Cyl. ..................................................................$38,500 Duetz Eng ..............................................$59,500
2014 John Deere 450J, Stk#: 12400, OROPS, 6 2014 Cat 329EL, Stk#: 12210, EROPS, A/C & Way Blade, 3,840 hrs., 24" Pads, 80% U/C, 9' Heat, FM Radio, 4,768 hrs., 36" Bucket w/Hyd. 10" Wide ................................................$46,500 Thumb, Aux. Hyd., 30" Pads, 9' 6" Stick $96,500
2018 Kobelco SK75SR3, Stk#: 12313, EROPS, A/C, 1,224 hrs., 24" Bucket, 8 ft. Push Blade, 18" Rubber Tracks........................................$66,500
2018 Cat 259D, Stk#: 12469, EROPS, A/C & Heat, 2014 Cat 312EL, Stk#: 12391, EROPS, A/C & AM/FM Radio, 1,020 hrs., 6 ft. Bucket, 12" Heat, AM/FM Radio, 6,398 hrs., 31" Bucket, 9' 3" Rubber Tracks, Aux. Hyd., 4 Cyl. Cat Eng$46,500 Stick, 24" Pads, Aux. Hyd., 85% U/C ....$59,500
2018 Linkbelt 80X3, Stk#: 12422, EROPS, A/C, 2016 Cat 304E 2CR, Stk#: 12477, OROPS, 1,266 hrs., Front Blade, 22" Bucket, 7' 6" Arm, 18 1,801 hrs., 11" Bucket, 4 Way Blade, 14" Pads, 2009 Broderson IC80-2H, Stk#: 12456, 18,000 " Rubber Tracks, Aux Hyd., Isuzu Eng., 7' 7" Wide 5' 5" Stick, Aux. Hyd., 4 Cyl. Cat Eng., 6' 5" Wide lbs., 46 ft., 1,345 hrs., 10 ft. JIB, 4WD, 4WS, 69 ..............................................................$72,500 ..............................................................$32,500 hp., 10.00Rx15 Tires................................$21,500
2018 Cat D6T LGP, Stk#: 12521, EROPS, A/C & Heat, St.Tilt Blade, 3,505 hrs., 20% U/C, 36" Pads, 12' 7" Wide ................................$169,500
2015 Doosan G25E5, Stk#: 12280, 15ft., 1,559 Hrs., 40" Forks, 3 Stage Mast, 7.00x15x5.50 Front Tires, 6.50x10 Rear Tires, Duel Fuel Propane/Gas ..........................................$19,500
2012 Skytrak 10054, Stk#: 11990, 10,000 lbs., 2014 Cat 336EL, Stk#: 12421, EROPS, A/C & 54 ft., 7,019 hrs., 60" Forks, 74" Frame, Aux. Heat, 4,438 hrs., 47" Bucket, 10' 6" Stick, 21' 4" Hyd., 400x75x28 Foam Filled Tires, Hyd. Self Leveling System, 4 Cyl. Cummins Eng. $38,500 Boom, 34" Pads, 80% U/C ..................$129,500
2016 Cat 279D, Stk#: 12416, EROPS, A/C & Heat, 1,266 hrs., 80" Bucket, Electric Quick Coupler, Aux. Hyd., 18" Rubber Traks, 4 Cyl. Cat Eng ........................................................$42,500
2018 Cat 323FL, Stk#: 12314, EROPS, A/C & Heat, AM/FM Radio, 1,730 hrs., 42" Bucket, 36" Pads, Aux. Hyd ......................................$146,500
2014 Hyundai 160D-7E, Stk#: 12174, EROPS, A/C & Heat, 35,274 lbs. Lift, 13 ft., 7,398 hrs., Rear Camera, Side Shift Carriage, 12.00x20 NHS 2008 Broderson IC80-2G, Stk#: 12438, 18,000 lbs., 46 ft. 1,294 hrs., 10 ft. JIB, 4WD, 4WS, 69 Tires @ 80%, Cummins QSB 6.7 Eng., wt. 43,265 lbs..............................................$79,500 hp., 10.00Rx15 Tires ............................$19,500
2011 Volvo A25E, Stk#: 11745, EROPS, A/C & Heat, 6WD, 10,864 hrs. 25 Ton Cap., 23.5Rx25 Tires ......................................................$76,500
2013 Superior DT80C, Stk#: 12089, EROPS, 1986 Case 450C, Stk#: 12492, OROPS, Sweeps, 2010 JLG 600AJ, Stk#: 12136, 500 lbs., 60 ft., 5 hrs., 8 ft. Broom, P235/75Rx15 Tires, 4 Way Rear & Sides Screens, 6 Way Blade, 4,340 hrs., 2,912 hrs., 355x55Dx625 Tires, 4 Cyl. Deutz Eng. 2012 JLG 400S, Stk#: 12161, 500 lbs., 40 ft., Broom, Water System............................$19,500 80% U/C, 16" Pads, 7 ft. Wide ..............$16,500 ..............................................................$29,500 3,296 hrs., Foam Filled Tires @ 75% ......$26,500
2012 Laymor SM300, Stk#: 12093, 813 hrs., 8 ft. Broom, 3 Wheel, ST205x75Rx14 Tires, 4 Cyl. Kubota Eng...............................................$14,500
2013 JLG G12-55A, Stk#: 11883, EROPS, 12,000 lbs., 55 ft., 6,362 hrs., 48" Forks, 52" Frame, 4WD, 400/75- 28 Tires, 4 Cyl. Cummins Eng.........................................................$46,500
2013 Atlas Copco QAS90, Stk#: 12088, 6,135 hrs., ST205x75Rx15 Tires, JD Eng. ........$19,500
2000 Cat 924F, Stk#: 12113, OROPS, 6,423 hrs., 94" Bucket, 17.5x25 Tires..............$22,500
Page 4 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
FEATURES
8
IN THIS ISSUE 8
Circulated Throughout
• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming
28
50
To read these stories and many more, visit www.constructionequipmentguide.com
ECA REMEMBERS LONG-TIME, RESPECTED EMPLOYEE PETE SCHELL
Pete Schell, former long-time employee of Equipment Corporation of America, passed away on June 28, 2020. His mechanical aptitude earned him respect with many foundation contractors and drove ECA Washington’s expansion.
8
WESTERN EDITION
LANCO WINS MANITOWOC’S TOP DEALER AWARD
22
50
HITACHI IE TAPS SYNCRON FOR INVENTORY MANAGEMENT
COLORADO’S FRAZEE CONSTRUCTION LEANS ON HITACHI EQUIPMENT
Lanco — representing Walter Payton Power Equipment in the Midwest, Western Pacific Crane and Equipment on the west coast and Mi-Jack Canada in western Canada — has been named Manitowoc’s Top Dealer of the Year, once again.
Hitachi IE, a manufacturer and maintenance services provider of industrial equipment and solutions, is undergoing an evolution in optimizing its service parts inventory management processes
Growing up, Jeremy Frazee knew that life spent working in a cubicle wasn’t going to work for him. He spent his high school summers working as a laborer for the company his grandfather started, Frazee Construction.
Hyundai Construction Equipment Americas welcomed J.Y. Kim as president. A 28-year Hyundai veteran, Kim began his career as part of an overseas sales team to support North American operations.
Improving sentiment in the wake of t COVID-19 saw demand for construction equipment recover strongly in the third quarter of 2020, particularly in China, helping Volvo CE post improvements in sales, orders and machine deliveries.
Leaders in the competitive snow and ice management business, Iron Mountain, Mich.-based Boss Snowplow has a few new products available to customers this year.
ioneer Ltd has signed a partnership with Caterpillar Inc. as its exclusive heavy equipment partner for the Rhyolite Ridge Lithium-Boron Project in Nevada. Equipment and services supplied by Caterpillar are valued at $100 million.
Transportation construction companies from three states were recognized for their outstanding employee safety programs during the American Road & Transportation Builders Association’s (ARTBA) Annual Convention.
Kirby-Smith Machinery Inc. (KSM) has hired Gavin Cole as sales manager of its Fort Worth, Abilene and Waco, Texas, locations.Cole brings more than 24 years of relevant experience in managing sales and dealer operations.
The focus of a recent equipment auction held by SANY America, two SY215C excavators, were auctioned in September, and their combined sales helped raise more than $55,000 for charity.
8
HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS WELCOMES J.Y. KIM
13
IONEER, CASHMAN CAT TEAM UP FOR PROJECT IN NEVADA
13
KIRBY-SMITH MACHINERY HIRES GAVIN COLE AS SALES MANAGER
14
WORLD OF ASPHALT CANCELS 2021 SHOW, ANNOUNCES 2022 DATES
22
22
26
30
REBOUND IN DEMAND, VOLVO CONSTRUCTION SEES Q3 BOOST
CONTRACTORS RECEIVE HONOR: 2020 NATIONAL SAFETY AWARDS
SANY AMERICA AUCTIONS EXCAVATORS TO LIFT MORE THAN DIRT ASPHALT PRODUCERS RANK AMONG NATION’S TOP RECYCLERS
The executive committee of World of Asphalt Show & Conference and AGG1 Academy & Expo announced Nov. 5 the combined in-person shows will not be held in 2021 due to ongoing concerns related to COVID-19.
Asphalt has gone green? Yes, and they’re not new players, according to NAPA. The country’s most diligent recyclers are asphalt mixture producers, who use more than 94 percent of old asphalt pavements in new pavement construction.
On Sept. 30, the company celebrated the achievements of Neil Smith, whose career with JCB took him to more than 50 countries and whose skills and “can-do” attitude, have left a lasting impact on countless team members lives.
Kirby-Smith Machinery Inc. has hired Robert Perkins as paving and compaction specialist for its road construction and minerals division. Perkins brings nearly two decades of experience the position.
18
NEIL SMITH, ‘TOP GEAR’ SHOW STAR, RETIRES FROM JCB
Founder, Publisher & CEO Western Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.
Edwin M. McKeon Sr. Dennis Hogeboom Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz
www.constructionequipmentguide.com
TRAILER SECTION
39 48
CONSTRUCTION EQUIPMENT GUIDE’S 2020 TRAILER CHARTS
SMITHCO SIDE DUMP TRAILERS OFFER VERSATILE SX SERIES, CP30
DEPARTMENTS
58 60
BUSINESS CALENDAR
27 28
WIRTGEN SP 124i Paver BOMAG CR 1030 T Paver
COMING AUCTIONS
EQUIPMENT
Dennis Hogeboom
Kent Hogeboom
Patrick Kiel
Sharon Swanson
• Colorado • Louisiana • Oklahoma • Texas • New Mexico
National Sales Manager
• Idaho • Montana • Oregon • Washington • Wyoming
• Arizona • California • Nevada • Utah
952/353-1770 612/481-8557 Cell e-mail pkiel@cegltd.com
760-518-4336 Cell e-mail sswanson@cegltd.com
Cell e-mail
Advertising e-mail production@cegltd.com
Mobile
KSM HIRES PERKINS, PRODUCT SPECIALISTS TO GROW DIVISION
BOSS SNOWPLOW INTRODUCES NEW BACK DRAG PLOW TO MARKET
For advertising rates Contact
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site
36
55
YouTube
602/679-8759 dennishogeboom@cegltd.com
Cell e-mail
315/866-1423 518/221-5159 khogeboom@cegltd.com
Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
Contents Copyrighted ©2020, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 5
2020 Peterbilt 337 Paccar PX-9, 330HP, Allison 3500, A/C, C/C, 26,000GVW, Stellar T-Max 2-11 STELLAR 12621 Telescopic Crane 21’ Reach & 12,000lb Cap w/ Remote Control., Stk #: 20M0197 $159,900
2018 John Deere 310L EP 4TNV98CT-ZNJBL, Stk #: 18E0178 $59,900
2016 CAT CB66B, Vibratory System ROPS, 84" Drums & Water Spray, Tier 4 Final., Stk #: 16E0177 $97,500
2020 Ford F550 4x4, 6.7L, A/C, C/C, 19,500GVW, Stellar TMAX 1-11 Aluminum Mechanical Body, STELLAR 7621 Telescopic Crane 21’ Reach & 7,500lb Cap. w/ Remote Control., Stk #: 20M0196 $125,900
2013 Mack CXU613 6x4, Mack MP7, 345HP, FR013210 10spd, A/C, C/C, 52,000GVW, PW, PL, PM NEW ROLL OFF, 311943 mi, Stk #: 13F9215 $75,900
2021 Dorsey DF53BTR, 80,000GVW, Axle, 38’L, 8’6”W, Drop Deck, Overall 53’, Upperdeck 10’6”, Lower Deck 38’1”, Steel Smooth Plate & Traction Bars, Decking 1-1/8” Apitong, Stk #: 21T0094 ...$33,750 +FET
2021 Dorsey TA20, 47,900GVW, Tagalong 20 ton Capacity, Overall Length-35’, Width-8’6”, Deck Length-24’, Apitong 1-1/2” Deck Flooring, Aluminum Wheels, LED Lights,Hydraulic Ramps, Stk #: 21T0092 ...$26,750 +FET
2011 Ford F750 Cummins, A/T, A/C, C/C, 33,000GVW, Altec AM55, 60', 92141 mi, Stk #: 11B0100 $69,900
2020 International CU515 4x4, 66.6L DSL, A/T, A/C, C/C, 19,500GVW, Versalift SST-40-E1H, 45', PW, PDL, PM, Sync, Stk #: 20B0162 ...$117,900
2020 Ford F550 6.7L, A/C, C/C, 19,500GVW, Versalift VST50TN, 55',PW, PD, PM, Sync, Stk #: 20B0175 ...$123,900
2020 Dodge 5500 4x4, 6.7L, A/T, A/C, C/C, 19,500GVW, Versalift SST-40-E1H, 45', PW, PDL, PM, SYNC, 28 mi, Stk #: 20B0161 ...$114,900
2019 Ford F450 V10 Gas, A/T, A/C, C/C, 16,000GVW, Versalift SST36NE, 41', PW, PM, PL SYNC, 19 mi, Stk #: 19B0040 ...$88,900
2013 Freightliner M211242S DD13, 350HP, FR013210 10spd, A/C, C/C, 33,000GVW, PW, PL, PM *NEW Hard Ox 450 10FT5yd Dump w/ tow pkg, 167,249 mi, Stk #: 13V9396 ...$67900
2013 International 7300 Digger, 4X4, A/C, C/C, 33,000GVW, Altec DM47B-TR, 47 Sheave Height, 51,105 mi, Stk #: 13D0083 ...$59,900
2012 Freightliner 12564ST 6x4, DD13, 435HP, FR015210C 10SPD, A/C, C/C, 52,000GVW, w/ NEW 4000 Gal Water Tank, 241,272 mi, Stk #: 12V9228 ...$79,900
2013 FREIGHTLINER M2106 6.7L Cummins, 220HP, Allison 2200RDS A/T, A/C, C/C, 26,000GVW, Water Truck 2000 Gal, 6 Nozzels, Will Draft,, 180,039 mi, Stk #: 13V9262C ...$59,900
2014 International 4300 MAXX Force DT, 215HP, Allison A/T, A/C, C/C, 25,999GVW, *w/ NEW 2,000 gal water tank, hose reel & 5 air valve spray heads, 158,545 mi, Stk #: 14V9056 ...$53,900
2015 Freightliner M2 Cummins 6.7L, 220HP, Allison 2200RDS A/T, A/C, C/C, 26,000GVW, w/ NEW 18’ Debris Dump, 156,179 mi, Stk #: 15V0017 ...$67,900
2014 International Durastar 4300 MAXX Force DT, 215HP, Allison Auto, A/C, C/C, 25,999GVW, New 18ft Debris Dump w/ Crows Nest, 138,231 mi, Stk #: 14V9057 ...$59,900
2012 Volvo VNL64T300 6x4, D13, 425HP, FR015210C 10SPD, A/C, C/C, 52,000GVW, 22’L, PW, PL, PM *NEW 22FT Flatbed & hitch, 269,095 mi, Stk #: 12V9253 ...$69,900
Page 6 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
heavy equipment
Armor PROTECTION TECTION YOU YOU CAN COUNT COUNT ON!
(3) 2012 PTH2500 Rock Crushers 98� Working Width, 0 Hours, New Inventory
Heavy Equipment Armor is a co ompany dedicated to building cab g guard products for heavy equipment. Step-up the safety o on your excavator or skid steer with h a UL752 Level 1 ballistic door/window better know as the e Defender Ballistic Door/Window. Whether W you are operating a hammer, auger, mower, mulche er, or a log processor you can feel ssecure in knowing there is a ž� bullet resistant door in place, to o help protect your BIGGEST ASSET – YOU! 2XU SURGXFWV ¿W %REFDW &DWHUSLOODU .XERWD DQG .RPDWVX.
Stock Numbers: B15817, B16545, B15816
Sale Price: $90,500
Defender Ballistic Door for Skid Steers
Contact: Doug Shipp (406) 672-6880 1835 Harnish Boulevard • Billings, MT 59101
Defender Balllistic Window for Excavator
Made by contractors, for contractors
Visit us @ Hearm mor.com
Skeleton Front Door for Skid Steers
Bolt-on Window Screen for Excavator
208-3 304-0002
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 7
Four Seasons Equipment
Porter Group USA
Orion Equipment
8111 Mills Rd. Houston, TX 77064 800-234-5007 Dallas, TX 866-270-1700 www.fourseasons-equip.com
13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.portergroupusa.com
18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com
Page 8 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ECA Remembers Long-Time, Respected Employee Pete Schell Pete Schell, former long-time employee of Equipment Corporation of America (ECA), passed away on June 28, 2020. Mr. Schell was working in the shop with Hercules Machinery in Sterling, Va., a family-owned pile driving equipment business in the 1970s. After recognizing his stature in the market with local contractors, former ECA President Ben Dutton forged a connection with Mr. Schell in an effort to expand ECA’s footprint into the region. ECA opened its fledgling Washington branch in the late 1970s with Mr. Schell at the helm. In fact, he worked from home in the early days. ECA Washington was focused primarily on pile hammers at the time, but Mr. Schell helped to fuel the compa-
ny’s much greater aspirations. “Pete was instrumental in getting ECA started in the foundation drilling business, starting a dealer relationship with Krupp in the mid1980s, followed by Hütte and KLEMM,” said CEO Roy Kern. “This early foray into small-diameter drilling gave us a big head start on many of our competitors, and to this day, foundation drilling is our biggest market.” Mr. Schell’s mechanical aptitude earned him respect with many foundation contractors and drove ECA Washington’s expansion. Some even suggested he could build a complete KLEMM, Krupp or Hütte drilling rig with his eyes closed. Mr. Schell, whose starting salary with ECA in 1976 was $23,000, went on to contribute more than $7 million in profits
Pete Schell
over his career during a time when $1 million was a substantial sum for ECA. Mr. Schell’s influence extended
far beyond ECA Washington’s territory. His core territory was Maryland, Washington, D.C., and Virginia, but his true reach was east
of Mississippi. CEO Roy Kern said in the eulogy: “Pete has moved on to a better place to be reunited with Jesus and his wife Christl, and he’s probably designing the ultimate drill rig with Michelangelo as I speak. He was a great man and his legacy lives on — at ECA and in all of you.” Mr. Schell retired in 2013, but his legacy lives on through his son, Dave. He followed in his father’s footsteps in 2006, and currently serves as corporate director of parts and service at ECA Washington. Dave Schell wears the watch presented to his father at his retirement dinner in 2014 to remind him of his father’s service to the company. The watch inscription reads “1976 – 2013,” but it seems the Schell name will be alive and well at ECA for decades to come.
Hyundai Construction Equipment Americas Welcomes J.Y. Kim
The award was presented to (L-R): Jack Wepfer, VP finance of Lanco; Brian Lynch, general manager of Walter Payton Power Equipment and Mi-Jack Canada; Patrick Lanigan, director of Lanco; and David Hull, general manager of North America, Manitowoc.
Lanco: Manitowoc’s Top Dealer The parent company of Walter Payton Power Equipment, the Lanco Group of Companies (Lanco), has been named Manitowoc’s Top Dealer of the Year, once again. Lanco — representing Walter Payton Power Equipment in the Midwest, Western Pacific Crane and Equipment on the west coast and Mi-Jack Canada in western Canada — is the single largest dealer across brands such as Manitowoc, Grove and National Crane. “First and foremost, taking care of our customers and treating them just like how you would want to be treated is the core of Walter Payton Power Equipment’s partnership with Manitowoc,” said Brian Lynch, general manager of Walter
Payton Power Equipment. “Our great partners at Manitowoc make our jobs a lot easier by having the best quality cranes in the business.” Walter Payton Power Equipment is a supplier of new, used and rental cranes from Manitowoc, including lattice boom crawler, carry deck, rough-terrain, all-terrain, telescoping crawler and boom trucks. “It is an honor for our team to be a top dealer, and we couldn’t do it without the best customers in the business. Thank you,” said Lynch. Located less than an hour south of Chicago in suburban Riverdale, Ill., Walter Payton Power Equipment is one of the biggest stock dealers for new Manitowoc equipment worldwide.
Hyundai Construction Equipment Americas Inc. welcomed J.Y. Kim as president. A 28-year Hyundai veteran, Kim began his career as part of an overseas sales team to support North American operations, and later worked at HCEA’s Chicago office from 2004 to 2008. Kim was instrumental in establishing a foundation for a CE Brazilian factory and sales company before managing operations for Indian manufacturing, sales and marketing. During his tenure in India he brought Hyundai’s market share to 19 percent. After his two major overseas stays, he worked with emerging countries that include Russia, Australia, New Zealand, Latin America and many Southeast Asian countries. “We are excited to have J.Y. bring his passion, market knowledge, and support, as well as his understanding of worldwide trade operations to the North America, especially when understanding import/export policies has become a critical part of successful management, “Stan Park, HCEA vice president distribution and marketing. For more information, visit www.hceamericas.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 9
NPK Welcomes
NEW DEALER Oregon & Washington: Triad Machinery
Page 10 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $155
John Deere 850C Dozer, 1:50 scale - $50
Bucyrus Erie 22-B Dragline, 1:50 scale - $285
Bobcat 225 Compact Excavator, 1:25 scale - $55
Bobcat 753 Skid Steer Loader, 1:25 scale - $50
Sakai TS150 Asphalt Compactor, 1:40 scale - $50
Liebherr L522 Wheel Loader, 1:50 scale - $50
John Deere Skid Steer Loader, 1:32 scale - $45
Case 850C Track Loader, 1:35 scale - $40
Caterpillar D10 Track-Type Tractor, with Ripper, 1:70 scale - $30
Caterpillar CB-534 Asphalt Compactor, 1:50 scale - $30
Bantam C-35 Dragline, 1:25 scale - $200
Caterpillar 613C Elevating Scraper, 1:64 scale - $40
Case W20C Wheel Loader, 1:35 scale - $80
Caterpillar 966G Series II Wheel Loader, 1:87 scale - $35
Shipping and Handling Included
Drott 50 Excavator, 1:35 scale - $175
WE PURCHASE COLLECTIONS!!!
Bmckeon Collectibles
Contact – Barry McKeon
470 Maryland Drive Fort Washington, PA 19034
610-506-5961 Email – bmckeon9@gmail.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 11
Page 12 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
7TFI <NIJSJWX
2FYJWNFQ 9WFSXKJW ;JMNHQJX
10’ Commercial Pavers ѣ (TRRJWNHFQ 5F[JWX
<NYM T[JW ^JFWX TK J]UJWNJSHJ \J XUJHNFQN_J NS GZ^NSL FSI XJQQNSL ZXJI FXUMFQY UF[NSL JVZNURJSY
8’ Commercial Pavers ѣ (TRRJWNHFQ 5F[JWX
9FSIJR ;NGWFYTW^ 7TQQJWX
WEPIW$GEPZMRKVSYTMRG GSQ \\\ HFQ[NSLWTZUNSH HTR
&XUMFQY )NXYWNGZYTWX
(MNU 8UWJFIJWX
2NQQNSL 2FHMNSJX
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 13
ioneer, Cashman Cat Team Up ioneer Ltd has signed a partnership with Caterpillar Inc. as its exclusive heavy equipment partner for the Rhyolite Ridge Lithium-Boron Project in Nevada. The equipment and services supplied by Caterpillar during the first five years of operation are valued at approximately $100 million. In addition, Caterpillar will offer finance solutions for the equipment through Caterpillar Financial Services. Both the supply of equipment and services and finance solutions are subject to a final investment decision being taken on the project and definitive legal documentation. The partnership will operate through Cashman Equipment, a major Caterpillar equipment dealer, which has been based in Nevada since 1931. Domestic Lithium Battery Supply Chain ioneer’s Managing Director Bernard Rowe said, “We are extremely pleased to partner with the world’s leading manufacturer of mining equipment, Caterpillar.
“The Cashman Equipment Cat dealership has serviced the Nevada mining industry for close to 90 years and we are delighted it is joining us in a new era of mining within Nevada and the U.S. – producing materials that are critical for electric vehicles and renewable energy. “ioneer is at the forefront of the U.S. strategic imperative to develop a domestic lithium battery supply chain.” Cashman Equipment Vice President of sales, marketing and rental Todd Gilligan said, “A mining endeavour of this magnitude needs a first-class machine fleet and Caterpillar offers the most comprehensive, advanced line up of mining equipment and technology in the industry. “That fleet will be backed by dedicated experts like our employees here at Cashman to provide maximum uptime and efficiency. “We are excited to have been selected as ioneer’s partner and look forward to working together on this important American project that is set to become a major U.S. supplier to the lithium battery and EV markets.”
RENTALS
HEAVY EQUIPMENT
Entering a Partnership...
Serving the Construction & Mining Industries Since 1962
Former Rental Units for Sale:
2001 CAT 320CL, Ready to work, 24T HEX 1996 CAT 815F, Excellent, work ready 22 ton with reach boom, med stick, cab, AC, aux soil compactor with OROPS, S-Dozer w/ tilt, hyd. QC, 1000 hrs on new tracks ......$55,000 5200 hrs on rebuilt engine, 0hrs on newly rebuilt trans and 1200hrs on feet ....$149,000
2003 CAT D6R DS LGP, Excellent, series 2, LGP w/ cab, AC, 6S Dozer w/ tilt, drawbar, Almost new tracks w/ 50% 36" flat pads. Fully serviced and work ready ....................$79,000
1997 CAT D6R LGP, CAB, AC, 6S Dozer, 2003 CAT 330C, Work ready 40T HEX with DRAWBAR, 1200 hr on new UC w/ 36" FLAT reach boom, med stick, QC, GP Bucket, fully PADS, 2700 hr on engine rebuild. Runs great, serviced, Tier 2 engine ......................$69,000 former rental unit ..............................$65,000
2003 CAT 14H, Work ready, larger blade, fully equipped with cab, AC, pushblock, ripper, engine doors, 20.5-25 tires in good condition. 1 of 2 available ................................$149,000
1980 CAT 631D, 2000 hrs on CAT dealer re2012 TEREX TA300, Excellent, low hours, power 3408TA, T-2 engine, cab, AC, retarder, 30T 6x6 Artic with retarder, tailgate, backup 37.25x35 tires at 90%F, good rears. Excellent camera, supplemental steering, good tires. Work ready. One of two available ....$139,500 ..........................................................$99,000
2011 DEERE 544K, LOW Hours, cab, AC, QC with GP Bucket and Forks, in excellent condition, work ready ................................$82,500
KSM Hires Sales Manager Kirby-Smith Machinery Inc. (KSM) has hired Gavin Cole as sales manager of its Fort Worth, Abilene and Waco, Texas, locations. Cole brings more than 24 years of relevant experience in managing sales and dealer operations to the position, most recently serving as general manager of Briggs Equipment in Houston. With more than two decades of heavy equipment sales experience in Texas, Cole is extremely familiar with KSM’s market and customer base. He will manage all sales activity and be responsible for a team of Gavin Cole nearly a dozen sales personnel covering territory around the three branch locations. “I am excited to be back in the Dallas-Fort Worth metroplex with the opportunity to join such a talented team,” said Cole. “I am looking forward to building new relationships
and working with our sales team to support our customers.” Del Keffer, vice president of sales of KSM, believes Cole is an excellent addition to the sales management team. “Gavin is tenacious in his responsibilities, thoughtful in the way he treats customers and employees, and possesses both great integrity and a strong moral compass. His can-do attitude and customer focused manner will only add to the team he is leading in our Fort Worth, Abilene and Waco facilities. As you add to any team, you look for players who possess the skillset to make everyone around them better. Those skills are abundant in Gavin and will be well-matched to his new role.” For more information, call 888/861-0219 or visit kirby-smith.com.
(714) 340-1025 • Mike Kustura: sales@EccoEquipment.com
www.eccoheavyequipment.com
Santa Ana, CA – HQ (714) 554-4851
Visalia, CA (559) 651-0116
San Diego, CA (619) 205-2026
Coachella, CA (760) 578-1043
Sacramento, CA (916) 997-7492
Bullhead City, AZ (928) 715-0672
Riverside, CA (951) 276-9025
Stockton, CA (510) 516-5567
Phoenix, AZ (602) 276-2040
Las Vegas, NV (702) 877-4302
Salt Lake City, UT (801) 796-7368
Boise, ID (208) 459-3800
Williston, ND (701) 572-8126
Page 14 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
www.trophytractor.com Dozers - Crawler
2017 CATERPILLAR D10T2, 3456 Hrs ....................................$995,000 2011 CATERPILLAR D10T, 11,778 Hrs ....................................$575,000 1998 CATERPILLAR D10R ......................................................$125,000 (2) 1987/89 CATERPILLAR D10N ........................................$87,500 Ea. 2018 CATERPILLAR D9T ........................................................$805,000 1983 CATERPILLAR D9L................................................................$Call (3) 2012/18 CATERPILLAR D8T ....................................From $209,500 2004 CATERPILLAR D8R II ......................................................$125,000 (9) 2013-2019 CATERPILLAR D6T XW..........................From $145,500 (2) 2018 CATERPILLAR D6T XL ....................................From $329,500 2015 CATERPILLAR D6N XL, 3235 Hrs ..................................$164,500 2016 CATERPILLAR D6N LGP ................................................$139,500 (2) 2019/20 CATERPILLAR D6 LGP ..............................................$Call
Dozers - Wheel
2001 CATERPILLAR 854G ......................................................$209,500
Compactors - Padfoot / Smooth Drum
1996 CATERPILLAR 815F ..........................................................$95,000 (7) 2013/14/15/18/19 CATERPILLAR CP56B ..................From $79,500 (4) 2017/18 CATERPILLAR CS56B ..................................From $64,500 (5) 2013/15/17 CATERPILLAR CS66B ............................From $82,500
Motor Graders
Winch
PACCAR PA110VS245 ..................................................................$9,500
Off-Highway Trucks
(6) 2009/11 CATERPILLAR 785D....................................................$Call 2010 CATERPILLAR 777F ........................................................$259,500 (4) 1994/95 CATERPILLAR 777C ....................................From $69,500 2017 CATERPILLAR 773G ................................................................$539,500 (2) 1991 CATERPILLAR 773B ..........................................From $59,500 (2) 2016/17 CATERPILLAR 725C2 ................................From $229,500 (2) 2014/15 CATERPILLAR 725C ..................................From $197,500
CATERPILLAR 740 BED ..............................................................$5,000
2016 CATERPILLAR 140M3 ....................................................$199,500 2014 CATERPILLAR 140M2 VHP ..................................................$Call 2012 CATERPILLAR 16M VHP ................................................$289,500 2018 CATERPILLAR 18M3 ......................................................$769,500 (2) 2013/2015 DEERE 872GP ........................................From $129,500
Asphalt / Pavers / Concrete Equipment
2014 CATERPILLAR RM-300 ..................................................$169,500
Ripper
CATERPILLAR D8SS ..................................................................$24,500
2019 ROME TRCW16..................................................................$56,500 (2) 2016/18 ROME TRCW12 ............................................From $35,000 2019 ROME TACW16 ..................................................................$36,000 2018 ROME TCW28 ....................................................................$19,750 2018 ROME TCW32 ....................................................................$23,000
Excavators - Crawlers
Agricultural Tractors
2012 CATERPILLAR 627H........................................................$459,500
Attachments
(3) 2017/18 CATERPILLAR 349FL ................................From $289,500 2014 CATERPILLAR 349EL......................................................$169,500 2019 CATERPILLAR 336 ..........................................................$289,500 2017 CATERPILLAR 336FL, 2941 Hrs ....................................$215,000 2014 CATERPILLAR 329EL, 4134 Hrs ....................................$159,500 2015 CATERPILLAR 323FL......................................................$139,500 (3) 2018/19 CATERPILLAR 320......................................From $179,500 2017 KOMATSU PC360 LC-11..................................................$137,500 (3) 2018 SANY SY215C ..................................................................$Call
2018 JOHN DEERE 5125R ..........................................................$CALL 2015 JOHN DEERE 6215R ......................................................$109,500 (4) 2018/19 JOHN DEERE 6120M ....................................From $77,500 (2) 2017 JOHN DEERE 5085M........................................................$Call
Authorized dealer for
Misclleneous Equipment
Scrapers - Pull
Skid Steers - Track
(4) 2020 CATERPILLAR 299D3 XPS ..............................................$Call (2) 2016/18 CATERPILLAR 299D2 XPS ..........................From $59,500 2016 CATERPILLAR 299D2........................................................$65,000 (4) 2014/15/17 CATERPILLAR 299D XPS........................From $59,500 2016 CATERPILLAR 259D..........................................................$42,500 2016 CATERPILLAR 242D..........................................................$39,500 2016 CATERPILLAR 236D..........................................................$35,500
Wheel Loaders
1991 CATERPILLAR 992C ..............................................................$Call 2015 CATERPILLAR 950M, 1222 Hrs ......................................$184,500 2016 CATERPILLAR 938M ......................................................$139,500
Crawler Loaders
(2) 2018/19 CATERPILLAR 963K....................................................$Call
Crawler Carriers
(5) 2019 MOROOKA MST1500VD ..................................From $159,500 2019 MOROOKA MST1500VDR ..............................................$239,500 (4) 2018/19 MOROOKA MST2200VD ............................From $179,500 (2) 2018 MOROOKA MST3000VD ..................................From $229,500 2019 MOROOKA MST4000VD..................................................$319,500 (2) MOROOKA MST660VD ................................................$109,500 Ea.
Artic Truck
(2) 2015/16 CATERPILLAR 725C ..................................From $219,500 2017 CATERPILLAR 725C2......................................................$242,500
Water Equipment - Tower/Tanks
2020 KLEIN KPT-120 ................................................................$154,500
Water Equipment - Trucks
(6) 2014/15 CATERPILLAR 725C ..................................From $279,500 2019 FORD F750 ..................................................................................$95,000 (2) 2007/15 FREIGHTLINER M2 ..............................................From $49,500 (18) 2017/18/19 KENWORTH T370 ..................................From $89,500 (9) 2018/19 PETERBILT 348 ..........................................From $159,500 VOLVO A25D ............................................................................$139,500
World of Asphalt Cancels 2021 Show, Announces 2022 Dates The executive committee of World of Asphalt Show & Conference and AGG1 Academy & Expo announced Nov. 5 the combined in-person shows will not be held in 2021 due to ongoing concerns related to COVID-19. The decision was reached after extensive discussion between leadership from show co-owners National Asphalt Pavement Association (NAPA), Association of Equipment Manufacturers (AEM) and National Stone Sand and Gravel Association (NSSGA) as well as feedback from exhibitors, attendees and stakeholders. “Together we made the difficult decision to not hold World of Asphalt and AGG1 in 2021 in Atlanta,” said Audrey Copeland, president and CEO of the National Asphalt Pavement Association. “The health and safety of all participants in the show is our highest priority and with the status of the pandemic in the U.S., we believe the responsible choice is to not hold the show in 2021 and focus our sights on 2022 in Nashville.” The next in-person World of Asphalt and AGG1 is planned for March 29 to 31, 2022 at the Nashville Music City Center in
Nashville, Tenn. “World of Asphalt and AGG1 attracts more than 10,000 individuals to an indoor space,” said Michael Johnson, president and CEO of the National Stone, Sand and Gravel
Association. “Given continued uncertainty around travel and restrictions of events at indoor facilities, the executive committee felt it was prudent to not host the show in early 2021. Exhibitors have been offered the
opportunity to transfer exhibit space funds to the 2022 Nashville show or to receive a full refund.” “We appreciate the ongoing support of our exhibitors and past attendees,” said Brittany Weltcheff, World of Asphalt and AGG1 show manager. “The show has always provided a productive face-to-face experience and valuable learning opportunities, and we are looking forward to seeing everyone in Nashville in 2022.” NAPA and AEM are currently exploring the option of offering an all-digital education conference in 2021. The organization will share more information soon regarding this option. Attendee registration for the 2022 show in Nashville will open in fall of 2021. World of Asphalt owners are NAPA, AEM and NSSGA. AEM is show producer. World of Asphalt Show and Conference and AGG1 Academy and Expo is held annually except in CONEXPO-CON/AGG years, with that show spotlighting the exhibitors and products of World of Asphalt. For more information, visit worldofasphalt.com or agg1.org/.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 15
WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com
12320 S. Main Street • Houston, TX 77035 • 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016
www.kirby-smith.com
KIRBY-SMITH MACHINERY INC. 6715 W Reno Avenue • Oklahoma City, OK 73137 • 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370
www.clairemontequipment.com
CLAIREMONT EQUIPMENT 7651 Ronson Road, San Diego, CA 92111 • 858-278-8351 1330 W Mission Road, Escondido, CA 92029 • 760-739-9100 8520 Cherry Avenue, Fontana, CA 92335 • 909-429-9100 440 West Aten Road, Imperial, CA 92251 • 760-355-7700 81-501 Industrial Place, Indio, CA 92201 • 760-863-5558 4726 Convoy Street, San Diego, CA 92111 • 858-278-8338
www.roadmachinery.com
“BUILDIN NG FOR THE FUTURE.”
ROAD MACHINERY LLC Phoenix, AZ • 480-545-2400 Phoenix, AZ • 602-252-7121 Prescott, AZ • 928-778-5621 Tucson, AZ • 520-623-8681 Bakersfield, CA • 661-695-4830 Hayward, CA • 510-659-1903 Fresno, CA • 559-834-3149 Mojave, CA • 661-824-2319 Perris, CA • 909-355-3600 Pico Rivera, CA • 562-699-6767 Redding, CA • 530-229-3820 Sacramento, CA • 916-375-3540 Santa Rosa, CA • 707-544-4147
www.powermotivecorp.com
THREE GENERA G T TIONS. “At Selge Constrruction, we’re a family business. ss. My son-in-law and even grandson andson are involved and interested in thiss great occupation. I’ve built a good name in our marketplacee with a reputation for quality work and integrity in the way we do business. And I choose Komatsu because se they match my values. Their excavatorss help my crews and family carry rry on our goals: to provide thee best job for an honest price. It’s these and maany other reasons why Komatsu su works for us!”
Marv Selge (with with Noah & Justin) / Selge Construction, Construction, Inc. / Niles, MI
POWER MOTIVE CORPORATION DENVER HEADQUARTERS 5000 Vasquez Blvd., Denver, CO 80216 • 303-355-5900 Colorado Springs, CO • 719-576-5541 Durango, CO • 970-259-0455 Grand Junction, CO • 970-241-1550 Milliken, CO • 970-587-1188 Cheyenne, WY • 307-634-5149
That t’s s why y I am Komats t u tsu komaatsuamerica.com
© 2019 Komatsu America Corp. All Rights Reserved 037
Page 16 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 17
SALES • SERVICE • PARTS • RENTALS
Kaweah Equipment Co. www.kaweahequipment.com 10725 W. Goshen Ave. Visalia, CA 93291 559-733-2982
www.cpower.com 9200 Liberty Drive Liberty, MO 64068 816-781-8070 Wichita, KS 316-943-1231 Great Bend, KS 620-792-1364 Liberal, KS 620-624-7274 Woodward, OK 580-256-6014 Salina, KS 785-825-8291 Colby, KS 785-462-8286
Springfield, MO 417-865-0505 Joplin, MO 417-726-5373 Riverside, MO 816-415-6787 Wichita, KS 316-789-7370 Yukon, OK 405-324-2330 Maryland Heights, MO 314-427-4911 Liberty, MO 806-415-6700
Page 18 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Neil Smith, Demonstration Team Leader, ‘Top Gear’ Show Star, Retires From JCB Since 1976, Neil Smith has represented JCB in a number of roles, most recently as the head of the company’s North American demonstration team. But you also can find him in the Guinness Book of World Records as the holder of the record for the longest trip made in an excavator, or as the driver of the world famous 100 mph drag-racing backhoe, the JCB GT. On Sept. 30, the company celebrated the achievements of Smith, whose career with JCB took him to more than 50 countries and whose skills and “cando” attitude, have left a lasting impact on countless team members lives. Speaking at the ceremony at the company’s headquarters in Pooler, Ga., JCB North America President and CEO Richard Fox-Marrs said, “Neil’s initial mission in North America was to set up the demo facility and he set it up well, putting the same exacting standards in place in Savannah that he’d seen in the UK. He really did create an excellent facility and team that has stood the test of time. “All of us here at JCB wish Neil the very best in his retirement, we are extremely grateful for all of his contributions to the success of the company in his 44-year career, and he will be held in the highest regard,” said Fox-Marrs. Beginning 44-Year Career Born in Rocester, United Kingdom, the home of JCB’s World Headquarters, working for JCB was a natural fit for Smith as both his father and older brother both worked for JCB. “I walked past JCB every day to get to secondary school,” said Smith. “In fact, at 12 or 13 years old, my friends and I were walking home and decided to stop into the marketing department to pick up brochures for a school project. It was this experience that made me realize just how great of a company JCB is, and I knew then that this was where I wanted to be one day.” Flash forward a few years and Smith would find himself joining the ranks of JCB in the machine shop, Bay 1 to be exact, working with numerically controlled machines. Smith served in several other roles at JCB until joining the UK Demonstration Team in 1980 where he spent his first six months learning the ins and outs of the JCB backhoe in order to perform with the world famous JCB Dancing Diggers.
CISCO EQUIPMENT www.cisco-equipment.com 1706 South 1st Street, Artesia, NM 88210 575-748-1314 Odessa, TX • 432-550-9181 Lubbock, TX • 806-745-9595 San Angelo, TX • 325-653-2121
FOUR SEASONS EQUIPMENT, INC. www.fourseasons-equip.com 8111 Mills Rd., Houston, TX 77064 • 800-234-5007 Dallas TX • 866-270-1700
(L-R) are Tonya Poole, vice president of HR; Neil Smith; Spencer Howard, demonstration team manager; and Richard Fox-Marrs, JCB Inc. president and CEO. The company presented Smith with a framed Ray Ellis print of Forsyth Park in Savannah and a custom-made memento marking his achievements at JCB created by JCB Engineer, Jason Middleton. NUECES POWER EQUIPMENT
After his initial six months training, Smith’s first Dancing Diggers performance was at a global construction equipment show called bauma held in Munich, Germany in 1980. Next Move For years Smith supported global JCB events from based in the UK, including trade shows, dealer events and even customer installations. But why leave the UK? When asked “What brought you to the United States?” Smith laughed and said, “That’s a funny story.” And as the story unfolds, it sounds more like a movie plot than an equipment company job offer. Smith said in 2000 he came across from the UK to support JCB marketing efforts with the Superbowl in Atlanta, Ga. After the event, John Patterson, JCB Group CEO at the time, said to Smith “What’s your next move?” and it was then that Smith made a statement that would change his life, “I’ve always wanted to move to the States.” Six months later, Smith and his wife and their two daughters would move to the United States so that Smith could help open JCB’s North American headquarters in Savannah, Ga., and lead the North American Demonstration Team. Smith’s career in the States has provided him a number of unique opportunities, from driving the “Backhoe Across America,” to creating Santa’s sleigh for The Lady Bamford Center for Early Childhood Development, to designing and building one of the region’s most enjoyable mud run
courses, and becoming the driver of the JCB GT. When the subject of the JCB GT comes up, Smith joked that he was in the “wrong place at the wrong time.” The JCB GT is the drag racing backhoe that can reach speeds more than 100 mph due to its supercharged 572 big block Chevrolet V8 engine. After a chance walk past a manager’s window, Smith is one of only two people in the global company who is certified to drive the GT. But it’s through the GT that Smith had several experiences of a lifetime, including drag racing down a professional test track and spending time with the television show “Top Gear.” During his final days in the office at JCB, Smith recounted the amount of once-in-a-lifetime opportunities that his career at JCB has afforded him. And when asked what his secret to working at the same place for 44 years is, he smiled and said, “It’s been a privilege to do what I do. I’ve been fortunate to never have woken up and said ‘I have to go to work’ it’s more like ‘I get to go to work’.” Looking Ahead In retirement, Smith and his wife Jeannette will move back to the UK where he said, with a laugh, that he plans to retire. But those who know Smith best know that after a short while, we’re more than likely to find him back at JCB Rocester, UK where it all began. For more information about JCB, visit www.jcb.com.
www.nuecespower.com 7510 IH-37 Access Rd., Corpus Christi, TX 78409 361-289-0066 Laredo, TX • 956-725-0066 San Antonio, TX • 210-310-0066 San Benito, TX • 956-361-0066 Victoria, TX • 361-576-0066 El Paso, TX • 915-541-0066
PORTER GROUP USA www.portergroupusa.com 13013 Temescal Canyon Rd, Corona, CA 92883 951-674-9999 Pacoima, CA • 818-834-0102 Newark, CA • 510-713-7368
MECOM EQUIPMENT www.mecomequipment.com 4546 N Wilson Way, Stockton, CA 95205 209-466-5135
JET CITY EQUIPMENT www.jetcityequipment.com 33345 SR 20, Oak Harbor, WA • 360-675-4441 Marysville, WA • 360-651-9079 Wenatchee, WA • 509-888-8181
R & S INDUSTRIES, INC. www.rsindinc.com 951 CR G, Clovis, NM 88101 575-769-8659
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 19
Step Inside Your Comfort Zone Because operator convenience is a priority for Hyundai, every Hyundai HX series excavator gives the operator a level of comfort typically reserved for luxury automobiles.
All-day comfort starts with the fully adjustable, heated air-suspension seat and full-surround climate control system. You also get Bluetooth MP3 radio and handsfree calling, as well as cup holders and a lunchbox storage area.
More standard features. More value.
www.hceamericas.com To learn more about the safety features built into HX series excavators, contact your Hyundai dealer today. ©2017 Hyundai Construction Equipment Americas. All Rights Reserved.
Page 20 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
MEET YOUR MAX
WIN A 1-YEAR LEASE ON AN ALL-NEW MAX-SERIES LOADER ™
When you complete a walkaround of an ASV loader with us, you’ll have a chance to enter to win. Contact us today to schedule an appointment.
Bee Equipment Sales Ltd.
CLM Equipment Co. Inc.
FMI Equipment
Jet City Equipment
www.beeequipmentsales.com
www.clmequipment.com
www.fmiequipment.com
www.jetcityequipment.com
3135 US Hwy 90 East Broussard, LA 70518 337-837-6693
11111 E Trent Avenue Spokane, WA 99206 509-927-4071
33345 SR20 Oak Harbor, WA 98277 360-675-4441
2506 Slaton Highway Lubbock, TX 79404 806-745-1511
4851 E Napoleon Road Sulphur, LA 70663 337-625-5942
10219 State Avenue Marysville, WA 98271 360-651-9079
2815 N Sam Houston Pkwy E Houston, TX 77032 281-598-2500
2713 Euclid Avenue Wenatchee, WA 98801 509-888-8181
NO PURCHASE NECESSARY. The Chance to Win an ASV Max-Series Lease Sweepstakes is open to residents of the 50 U.S. & D.C. & Canada, excluding Quebec, who are the age of majority or older and who are owners or operators of businesses in the agricultural, construction and landscaping industries. Void where prohibited. Starts at 12:00:00 AM CT on 8/1/20 and ends at 11:59:59 PM CT on 5/31/21. Odds of winning depend on number of eligible entries received. For how to enter and a copy of the official rules at www.asvi.com/winamax. Sponsor: ASV Holdings, Inc., 840 Lily Lane, Grand Rapids, MN, 55744 © 2020 ASV Holdings, Inc. For more information, visit ASVI.COM.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 21
/ 8 -0 0,0, /& &8 -0 4 ".& .& ( 3& "& 5 25 6" -* 5: 4 " ( 3 " 2 6 "-* 5:
Ditch Witch of Oklahoma/Tulsa
Vermeer Texas-Louisiana
www.ditchwitchok.com
www.vermeertexas.com
Oklahoma City, OK 73034 405-348-4633
Baton Rouge, LA 225-665-7900
Houston (Cypress), TX 281-671-6000
Tulsa, OK 74116 918-438-1560
Irving, TX 972-255-3500
Kilgore, TX 903-988-9868
Page 22 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hitachi IE Taps Syncron Rebound in Demand, Volvo for Inventory Management Construction Sees Q3 Boost “Syncron Inventory enables OEMs to easily centralize their inventory operations and turn their inventory operations into a key asset to overall organizational growth.” Ryu Shinagawa Syncron
Hitachi Industrial Equipment (Hitachi IE) has selected Syncron Inventory, a core solutions of the Syncron Service Cloud, to optimize the company’s global service parts inventory. Hitachi IE, a manufacturer and maintenance services provider of industrial equipment and solutions, is undergoing an evolution in optimizing its service parts inventory management processes to meet the changing need of its customer base. Previously beholden to disparate domestic and international inventory management systems, Hitachi IE has selected Syncron Inventory as a global platform to help the company establish more sophisticated demand forecasting and planning, to support their global service parts centralization initiatives. “To drive service part inventory success on a global scale a streamlined approach and a proven and tested global service parts management solution are pivotal,” said Keigo Katsumata, parts division director, service business unit, Hitachi IE. “We have evaluated a number of options and selected the Syncron Service Cloud for its ability to deliver a worldwide view of parts operations, easy-to-use and visibility and high-quality support. We strongly believe that Syncron Inventory will be key to helping us increase customer satisfaction, reduce lost opportunities, improve operational efficiency and exceed our short- and long-term KPIs.” In addition to improving global part visibility around the world and eliminating siloed inventory management processes in the immediate term, Syncron Inventory will allow Hitachi IE to lay the groundwork for long-term business and success. This will provide centralized data to allow the company to optimize inventory and reduce opportunity losses moving forward, according to the company. “Given how complex the ecosystem is, maximizing inventory success is one of the
most challenging pain points for many OEMs,” said Ryu Shinagawa, managing director, Syncron. “Syncron Inventory enables OEMs to easily centralize their inventory operations and turn their inventory operations into a key asset to overall organizational growth. In challenging economic times, this is critical. Hitachi’s decision to continue to invest — especially during a period when budgets are strained for many businesses — in our future together makes us incredibly proud and is further proof of the value Syncron delivers. We look forward to helping them accomplish their short-, medium- and longterm inventory goals and are confident we will be able to provide the groundbreaking value they’re looking for.” This announcement also marks the expansion of a long-standing partnership between Hitachi and Syncron, as Hitachi IE is now the third Hitachi business division — alongside Hitachi High-Tech (Syncron Inventory) and Hitachi Construction Machinery (Syncron Price) — to select the Syncron Service Cloud. “We are proud to empower the most admired manufacturing brands in the world to optimize and evolve their global after sales service operations to create immediate value and prepare for what’s next. Hitachi is one of the world’s foremost names in manufacturing with each of its business divisions doing some of the most innovative work in the industry today,” said Shinagawa. “So to be able to build upon the success of our relationship by joining forces with yet another standout Hitachi brand is incredibly gratifying and we look forward to the continued growth of this partnership.” For more information on Syncron Inventory, visit Syncron.com. For more information about Hitachi Industrial Equipment Systems, visit www.hitachi-ies.co.jp/english/index.htm.
Improving customer sentiment in the wake of the COVID-19 outbreak saw demand for construction equipment and services recover strongly in the third quarter of 2020, particularly in China, helping Volvo Construction Equipment (Volvo CE) post improvements in sales, orders and machine deliveries in the period. While net sales in the third quarter decreased by 2 percent to SEK 17,619 M (17,921), when adjusted for currency movements they were up 6 percent in the period. Adjusted operating income also was slightly down, at SEK 1,963 M, compared to SEK 2,180 M in the corresponding period in 2019. This equated to an operating margin of 11.1 percent (12.2 percent). Net order intake in the third quarter increased by 40 percent compared with the same quarter in 2019. Deliveries increased by 20 percent, to 19,774 machines, in the third quarter, mainly driven by higher sales in China.
The North American market also was down by 19 percent, while South America was up 11 percent, albeit from very low levels in 2019. In Asia (excluding China), the total market was down 13 percent. The Chinese market recovered strongly from the impact of the pandemic, driven by government stimulus measures, prompting an increase in demand of 22 percent in the period. “After the sharp COVID-19 triggered downturn of Q2 we saw construction activity gradually improve across most markets in the third quarter,” said Melker Jernberg, president of Volvo CE. “Demand was particularly strong in China, the world’s biggest market, and here we continued to grow our market share. With continuing uncertainty due to the ongoing spread of the pandemic, we will maintain a tight focus on cost control, and prioritize the health and safety of colleagues, customers and business partners.”
Market Development Most markets recovered well from the effects of the COVID-19 pandemic in the third quarter, with machine utilization at the end of the period at almost 2019 levels. That said, the ongoing uncertainty created by the pandemic weighed on the European market, which up to the end of August was down by 19 percent.
Important Events In line with the company’s policy of concentrating on core product groups, Volvo CE divested its North American Blaw-Knox paver range during the third quarter. It also announced that the first deliveries of its allelectric compact machines would begin in UK, France and Germany in the coming weeks.
Contractors Receive Honor: 2020 National Safety Awards Transportation construction companies from three states were recognized for their outstanding employee safety programs during the American Road & Transportation Builders Association’s (ARTBA) Annual Convention. The annual ARTBA “Contractor Safety Awards” were created to promote worker safety and health as core values of the transportation design and construction industry. The contractor finalists were competitively selected, based upon their accident and injury rates on work sites as reported to the Occupational Safety and Health Administration (OSHA), as well as their Experience Modification Rates (EMRs) as determined by their insurance carriers. Finalists from three different categories, based on the personnel hours worked in the previous year, were invited to make a pres-
entation before a panel of industry judges Oct. 15 and 16. Winners were selected based on demonstration of key principles of safety excellence including management commitment, employee participation, incident investigation, auditing, planning and risk assessment. The size categories are companies with 1) less than 500,000 personnel hours worked in the previous year; 2) 500,000 – 1,000,000; 3) Over 1,000,000 hours. The awards were presented as follows: • Under 500,000 personnel hours (small) = W.W. Clyde, Orem, Utah • 500,001 – 1 million (medium) = Great Lakes Construction Company, Hinckley, Ohio • Over 1 million personnel hours (large) = Sterling Construction Company Inc., The Woodlands, Texas. For more information, visit www.artba.org.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 23
WORLD’S SMALLEST BACKHOE NOW WITH TRACKS – JCB-1CXT
Max Dig Depth: 10 ft 1 in / Gross Engine Power 49 HP / Loader Bucket Breakout: 1,466 lb JCB 1 CXT, a TRACKED BACKHOE is a versatile machine, offering skid-steer and mini excavator performance in one package. The 1CXT provides superior maneuverability, an optional handheld tool auxiliary, as well as a universal quick hitch that is compatible with most of your skid steer attachments. Standard full cab with integrated heating & air-conditioning. Due to its compact size and under 10,000 lbs weight, the 1 CXT is easy to tow in a trailer without a CDL (where local regulations allow). NO DPF / DEF AFTERTREATMENT. Operators environment friendly with easy to use controls and all daily checks and greasing can be carried out at ground level on a JCB backhoe. To learn more about JCB 1CXT, visit www.jcb.com/en-us/products/backhoe-loaders/1cxt
935 E South Loop Stephenville, TX 76401 254-965-6783 877-207-8782 1841 N US Hwy 286 Decatur, TX 76234 940-965-6783 www.hendershotjcb.com
461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON 5050 East 58 Avenue Commerce City, CO 80022 720-386-6038 www.ProConJCB.com
/ /JCBNA
2935 Lincoln Road Las Vegas, NV 89115 702-432-2200 www.swjcb.com
@JCBNA
2240 W. Buckeye Road Phoenix, AZ 85009 602-761-2525 www.flaskajcb.com
w w.jcb.com .jcb.com JCBNA www
Cisco Equipment 620 N. Bell Street San Angelo, TX 76903 800-496-0271 www.cisco-equipment.com
Terms & Conditions: Pictures shown with optional accessories. For towing policy please consult with your local state transportation office. Offers may change without notice and may not be combined. Additional terms and conditions may apply, please contact your local JCB dealer for details. JCB dealer reserves the right to withdraw, alter or decline any product from sale or any offer without prior notice. Price, if shown, does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected.
Page 24 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
THE TORO® DINGO® TXL 2000 DOES THE WORK OF SEVERAL MACHINES IN ONE. Dig below grade, reach over obstacles and extend your workiing range with the powerful telescoping arms. Enjoy 360˚ visibility from the stand-on
FMI Equipment www.fmiequipment.com
operator platform. You can even use most skid steer and compact track
Toro® Dingo® TXL 2000
loader attachments with the universal
WITH TELESCOPING ARMS
mounting plate. Call 1-800-344-8676,
11111 E Trent Avenue Spokane, WA 99206 509-927-4071
option 1, to find a dealer near you.
OUT. T STANDING. © 2021 The Toro Company
HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave., Commerce City, CO (303) 287-7506 • (800) 646-6636 Durango, CO • (970) 247-4460 Grand Junction, CO • (970) 243-7090 Ogden, UT • (801) 627-0049 Salt Lake City, UT • (801) 262-7441 St. George, UT • (435) 652-8003 Casper, WY • (307) 266-4474 Cheyenne, WY • (307) 316-9800 Gillette, WY • (307) 685-4288 Rock Springs, WY • (307) 382-5284 Idaho Falls, ID • (208) 523-9915
MORE EEFFICIENT. MORE POWERFUL. Exclusive, three-pump hydraulic c technology for incredibly fast cycle times. Reduced tail swing with a full-sized cab. Ye eah. That’s the ZX345. HitachiCon nstruction.com
TTHIS IRRON W WILL WORK O SMARRTER.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 25
BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME
Marc Murphy, VP of Construction
WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers
CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers
CONSTRUCTION
Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087
Call Today: 610-941-0100 • Email: info@magellangroup.com
www.magellangroup.com
Page 26 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SANY America Auctions Excavators to Lift More Than Dirt From its headquarters in Peachtree City, Ga., SANY America produces heavy equipment that is made for America and sold through an expanding North American dealer network. Recently, two very distinct SANY excavators hit the road on their way to upstate New York. The focus of a recent equipment auction held by SANY America, the two SY215C excavators, one featuring an American flag wrap, the other an all-black model complete with chrome accents, were auctioned in September, and their combined sales helped raise more than $55,000 for charity. SANY’s eye-catching excavators were exclusively wrapped for the 2020 ConExpo trade show in Las Vegas. The enthusiasm and popularity of the machines gave SANY the idea to auction them off to dealers with the goal of raising money for two charities in particular, Promise Place and the Travis Mills Foundation. As it turned out, both excavators were purchased by one of the company’s newest dealers, SANY New York. The sale of the Black & Chrome Model raised $25,000 for Promise Place, a favorite charity among SANY employees. Based in Fayetteville, Ga., near the SANY headquarters, Promise Place exists to prevent domestic violence. The organization focuses on awareness programs, educational training and providing safe environments for the victims and their families by utilizing legal advocacy, emergency shelters and transitional housing. On Oct. 19, 2020, Vanessa Wilkins, executive director of Promise Place, and Nick Rider, Promise Place board chair, visited SANY’s facility in Peachtree City to accept the donation in person. In addition to supporting Promise Place, the timing of the donation aims to draw attention to the larger issue of family violence during National Domestic Violence Awareness Month. Ben Miller, vice president of sales of construction equipment at SANY America, says, “At SANY America, our employees are passionate and committed to supporting fantastic charities such as
Promise Place within the community where we live and work. Promise Place is an organization that is making an outstanding contribution to domestic violence awareness. This will mark our second donation of the year to them and we hope to be able to contribute even more in the future. They do great work. We are proud to help them maximize their impact within our community.” The American flag-wrapped SY215C was earmarked to raise money for the Travis Mills Foundation, an organization established to support re-calibrated veterans and their families through adaptive activities and sponsored retreats. The Travis Mills Foundation is another esteemed charity among SANY team members and dealer partners. The founder, Travis Mills, was a featured speaker at the 2020 SANY Dealer Meeting earlier this year. It was an inspirational moment for many members of the SANY team. On Oct. 15, 2020, Ben Miller, SANY America’s VP of sales of construction equipment, together with Joe Duplessis, SANY’s Northeast district sales manager, hand-delivered a check for $33,504.62 and an SY35U excavator to the Travis Mills Foundation at their veteran’s retreat facility in Maine. “The Travis Mills Foundation is a great organization that supports our veterans, and we at SANY America, along with our entire Dealer Partner network across the U.S., feel passionately about working to support them,” said Miller. “As we continue to grow our roots in America through increasing our equipment production, hiring more Americans and growing our American dealer network, it is important that we give back to our community and country. This aligns with the longstanding commitment of SANY to embrace first-class contributions to society, one of our three guiding principles. SANY America and our Dealer Partner network are proud to support the Travis Mills Foundation and their work with U.S. veterans and their families.” For more information, visit www.sanyamerica.com.
SANY America presented a check and an SY35U excavator to The Travis Mills Foundation at its facility in Rome, Maine. (L-R) are Joe Duplessis, Northeast District sales manager of SANY America; Travis Mills, founder of The Travis Mills Foundation; and Ben Miller, vice president of sales of construction equipment, SANY America.
SANY America presented a check to Promise Place at its headquarters. (L-R) are Scott Beck, director of human resources of SANY America; Ben Miller, vice president of sales of construction equipment, SANY America; Vanessa Wilkins, executive director of Promise Place; and Nick Rider, Promise Place board chair.
Paving
SECTION
Pages 27-37
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
Wirtgen’s SP 124i Paver Increases Production, Lowers Cost With the addition of two new models, Wirtgen is equipping its slipform pavers in the 40 ft. (12 m) class with proven technologies from the SP 60i and SP 90i series. Inset slipform pavers are an ideal choice for the cost-effective paving of large-scale concrete pavements, such as highly durable highways or aircraft runways. Wirtgen offers 14 machine models in various performance classes for this paving method alone. Due to their modular design, the machines can be customized to meet nearly any customer’s specific requirements. The two new pavers in the 40 ft. (12 m) class are the perfect smaller cousins of the larger Wirtgen slipform pavers, which are capable of paving concrete up to a maximum working width of 53.5 ft. (16 m). With a 430 hp (321 kW) Cummins engine that meets the U.S. Tier 4f emissions standards (SP 124i), or 365 hp (272 kW) that meets the U.S. Tier III emissions standards (SP 124), these new Wirtgen slipform pavers have sufficient power for placing concrete pavements from 14 to 40 ft. (4.50 to 12 m) wide and up to 18 in. (45 cm) thick.
The rugged design of Wirtgen’s SP 124i/SP 124 slipform pavers delivers consistently high performance in concrete paving and high-precision paving results, even in difficult site conditions.
SP 124i/SP 124: Steerable, Slewing Crawler Units The SP 124i/SP 124 is the first slipform paver from Wirtgen with a maximum working width of 40 ft. (12 m) to be equipped with four steerable and slewing crawler units, which are optionally available with a new slew drive steering system and a steering angle of up to 260 degrees. The additional maneuverability of the paver allows the operator to quickly adapt to changing job site conditions. Its narrow profile and reduced trackline allows paving close to obstacles. In addition, the four crawler units can be
switched to rotation mode at the push of a button. As a result, the SP 124i/SP 124 can turn almost on the spot and directly produce the next lane in the opposite direction without wasting any time on repositioning. During transport, the swing legs are swung in. Cost-Effective, High-Precision Paving The SP 124i/SP 124 pavers stand out with high paving accuracy, intuitive operation and ease of use, according to the manufacturer. Due to a wide range of
available options — such as a self-loading dowel bar inserter (DBI) with fully automated dowel magazine, tie-bar and side tie-bar inserter, or trough systems, each of which is tailored to the different global requirements for inset applications — the machines can be configured to suit any application. In addition to modern technologies, Wirtgen’s development of the new SP 120 series also focused on user-friendly machine operation and synergies with the SP 60i and SP 90i series. For example, the demand-optimized Eco Mode engine management sys-
tem helps reduce fuel consumption and noise emissions by adapting performance to application requirements. A tried and tested 3D interface offers reliable compatibility with 3D control systems from leading suppliers, making it future-proof, according to the manufacturer. In addition, the efficient WITOS FleetView telematics system offers fleet management, position and condition monitoring, as well as maintenance and diagnostic processes. For more information, visit www.wirtgen-group.com/america/en-us.
Page 28 • November 22, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
866-430-7539
www.jfwequipment.com sales@jfwequipment.com
Bomag Americas CR 1030 T Paver for Mountainous Jobs
Serving the Asphalt Industry for 30 Years 2015 Etnyre Centennial II distributor, 2000 gallons, BT1 computer controls, diesel heat, 14 ft spray bar, Peterbilt 337, Paccar PX9 diesel engine, 10 spd trans $128,000
The Bomag Americas CR 1030 T meets and exceeds Caltrans’ new ride specs, which makes for smoother transitions.
2015 Volvo PT125R pneumatic roller, 9 wheels, Kubota diesel engine, hydrostatic drive, water system $43,000
2009 Etnyre Centennial II distributor, 2000 gallons, BT-1 computer controls, diesel heat, 12 ft spray bar, Sterling L8500, Cummins ISC diesel engine, auto trans - $85,000
2007 Etnyre Centennial II distributor, 2000 gallons, computerized w/1 ft cut-offs, propane heat, 14 ft spray bar, 2007 Ford F750XL, Cat C7 diesel, 6 spd trans, 2 spd axle – $67,000
2004 Ferguson SP912 pneumatic roller, 9 wheel roller, John Deere diesel engine, hydrostatic drive, water system - $19,000
2002 Etnyre tanker distributor, 5000 gallons, Hatz diesel engine, computerized, radar, diesel burners, 12 ft spray bar, 2 tank valves - $35,000
2005 Rosco Maximizer II distributor, 1950 gallons, EZ2S computer w/1 ft cut-offs, diesel heat, 12 ft spray bar, 2005 IH 7300 w/DT466 diesel engine, Eaton 6 spd transmissions - $58,000
2009 Hamm HD70K combination roller, 59” drum on front, 4 tires on back, Deutz diesel engine, water system - $32,000
New Marathon hot tack distributor, Honda gas engine, 10GPM pump, 250 gallon, 5 ft spray wand w/50 ft hose, propane burners, flushing system, electric brakes (some w/spray bars)
3517 Wayne White Rd., Climax, NC 27233
Hat Creek Construction & Materials Inc. fast and efficiently. Their customer service is recently took delivery of a brand new simply impeccable.” Bomag Americas CR 1030 T paving Herrmann Equipment stands by its busimachine from Herrmann Equipment Inc. ness philosophy. The company was in the market for its first “We started as a niche business distributor tracked paver to assist in its numerous moun- company and continue today to be a distribtainous paving projects. utor of specialty equipment for a single Weston Hutchings, vice president of Hat industry. The philosophy, then and now, is Creek Construction & Materials Inc., said, having exceptional equipment and providing “Our paving team has been requesting a exceptional after-sale support of both service track paver due to its and parts,” the ability to climb grades company said. and handle curves on Matt Nelson, the two-lane highway director of sales of projects. The Bomag the western region, Americas CR 1030 T added, “Herrmann meets and exceeds Equipment not Caltrans’ new ride only is a locally specs, which makes owned and operatfor smoother transied business, but tions. This is especialbrings decades of ly important on the experience and terrain connecting knowledge in the driveways on our The tracked pavers now include an paving industry rural mountain roads,. upgraded platform and better sound and surpasses cusThe visibility and insulation for a better operator experi- tomer service year state-of-the-art elec- ence. after year. Bomag tronics on our new Americas is proud Bomag Americas paver make this machine to have Herrmann Equipment as a flagship our operator’s favorite.” within our dealer partner network.” Hutchings added, “When it came down to Austin Miller, manager of paving busimaking a buying decision, Matthew ness development, said, “It just proves that Herrmann’s expertise and amazing individ- taking the time to design and develop the ual support tipped the scale. We value our right machine for the customer is the key to relationship with Matthew Herrmann and product performance. And Herrmann the Herrmann Equipment team. Recently, Equipment makes our Bomag brand stand we had some questions and needed guidance above with excellent service and dedicated on our new machine. I called Matthew the technical staff.. Herrmann Equipment and night before a big project, and he dropped Bomag Americas partner alongside our cuseverything and traveled to our job site to help tomers like Hat Creek Construction & us out. We appreciate the fact that Herrmann Materials transforming the California infraEquipment is local and can service our needs structure for the future.”
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 22, 2020 • Page 29
CALIFORNIA Herrmann Equipment N CA (916) 783-9333 S CA (909) 877-5597 MONTANA/S. IDAHO/NEW MEXICO Roadtec (423) 265-0600
NEVADA/UTAH/ARIZONA Goodfellow (702) 293-7504
TEXAS Closner Equipment (210) 732-2131
OKLAHOMA Van Keppel (844) 499-6363
WYOMING/COLORADO Power Motive (303) 355-5900
Page 30 • November 22, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide Contact your local dealer: Contact your local dealer: Dealer Name City, ST 123.456.7890 Arnold City, ST Machinery Company www.arnoldmachinery.com 123.456.7890 2975 West 2100 South Elko, NV Salt Lake City, UT 801-972-4000 City, ST 801-972-4000 123.456.7890 Sparks, NV Idaho 775-356-1511 City,Falls, ST ID 208-523-0822 123.456.7890 Las Vegas, NV Meridian, ID 702-642-9000 City ST City, 208-887-6000 Phoenix, AZ 123.456.7890 Twin Falls, ID 602-414-1900 City, ST 208-733-1715 Tucson, AZ 123.456.7890 520-294-7677 City, ST 123.456.7890 City, ST Pacwest Machinery 123.456.7890 www.pacwestmachinery.com City, ST 8207 South 216th Street 19255 NE Sandy Blvd 123.456.7890 Kent, WA 98032 Portland, OR 97230 800-935-5933
800-929-5933
3515 N Sullivan Road Spokane Valley, WA 99216 800-938-5933
1550 Irving Road Eugene, OR 97402 866-920-5933
PAAVIN V NG TODAYY. BUILDING TOMMORROW.
Att Volvo, A l , we e know k th t you need that d reliable, r li bl d durable bl and d capab c bl paving b ble i equipment. i t That’s wh hy we work to build sustainable, productive and innovativve machines that help you get more m done faster. The future is waiting – turn to Volvo forr help with building tomorrow w.
DEALER LOGO www.website.com
Asphalt Producers Rank Among Nation’s Top Recyclers Asphalt, you ask, has gone green? Yes, and they’re not new players in the space, either, according to NAPA. The country’s most diligent recyclers are asphalt mixture producers, who utilize more than 94 percent of old asphalt pavements in new pavement construction. Civil engineering applications account for the remaining 6 percent, which are generally still road construction and maintenance projects. Examined another way, if you took all the newspapers, aluminum and steel cans, and the glass and plastic bottles the United States recycles annually and put them on a scale, they would weigh less than three-fourths that of reclaimed asphalt pavements (RAP). This makes asphalt America’s most recycled product. According to the latest industry survey (10th annual) by the National Asphalt Pavement Association (NAPA) in partnership with the Federal Highway Administration (FHWA), the industry reclaimed 97 million tons of RAP for future use, saving about 58.9 million cu. yds., or enough landfill space to fill up the dome of the U.S. Capitol 1,223 times. This massive reclamation effort also
saved $5.3 billion in gate fees for disposal in landfills. “NAPA is proud to release the results of our annual Asphalt Pavement Industry Survey on Recycled Materials and WarmMix Asphalt Usage,” said NAPA Chairman James (Jay) Winford Jr., president of Prairie Contractors Inc. in Opelousas, La. “This survey not only quantifies our industry’s commitment to recycling but also supports our objective to remaining the most recycled material in the nation. “NAPA and its members are committed to building and maintaining our country’s infrastructure with the utmost goal of recycling, sustainability and concern for our environment and resources while, at the same time, providing the travelling public with the smoothest, quietest, safest and most perpetual pavement surface available.” Of the 97 million tons of RAP reclaimed, contractors reused 89.2 million tons in new asphalt pavements in 2019. This is a nearly 8.5 percent increase from the 2018 construction season and represents a nearly 59.3 percent increase from the total estimated tons of RAP used in 2009, when this annual survey
was first conducted. For the first time, the survey evaluated greenhouse gas emissions, finding RAP usage saved 2.4 million metric tons of CO2e, the equivalent of removing 520,000 passenger vehicles from the road. “Over the years, we’ve seen steady advancement in RAP use across the country. Through collaboration on research and applied best practices among industry engineers and road owners, we maintain or improve performance while increasing the use of recycled materials,” stated NAPA President and CEO Audrey Copeland. Additional survey results show that asphalt producers used an estimated 921,000 tons of reclaimed asphalt shingles (RAS) in asphalt mixtures in 2019. RAS usage during the 2019 construction season is estimated to have reduced the need for 184,200 tons (more than 1 million barrels) of asphalt binder and about 460,000 tons of aggregate with a total estimated value of more than $103 million. Other recycled materials commonly reported include recycled tire rubber, blast furnace slag, steel slag, cellulose fibers and fly ash. Fifty-two companies in 24 states
reported nearly 1.3 million tons of these other recycled materials in the production of nearly 8.3 million tons of asphalt mixtures. Asphalt mix producers also continue to make significant use of energy-saving warm-mix asphalt (WMA) technologies. In 2019, contractors used WMA technologies for the production of 164.5 million tons of asphalt mix. A number of environmental, worker safety and construction benefits have been realized through the adoption of WMA technologies. Nearly half of the WMA production was at reduced temperatures decreasing the energy required to manufacture the mix. The most common WMA technology used is plant-based foaming, which injects a small amount of water into the asphalt binder during production. NAPA collected survey responses over the first half of 2020. The report compiles results from 212 companies with 1,101 plants in 48 U.S. states, the District of Columbia, and one U.S. territory. In its online store, NAPA provides a copy of the full survey report, including a state-by-state breakdown of data. For more information, visit https://www.asphaltpavement.org/naparef.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 22, 2020 • Page 31
KIRBY-SMITH MACHINERY INC.
NUECES POWER EQUIPMENT
MODERN MACHINERY
4RIVERS EQUIPMENT
www.kirby-smith.com
www.nuecespower.com
www.modernmachinery.com
www.4riversequipment.com
6715 W. Reno Oklahoma City, OK 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 918-438-1700 Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600
Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000 Waco, TX 254-261-1370
Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton, TX 915-541-0066 Houston, TX 713-247-0066 San Antonio, TX 210-310-0066
Spokane, WA 800-541-0754 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Portland, OR 800-950-7779 Eugene, OR 800-826-9811
Boise, ID 800-221-5211 Pocatello, ID 800-829-4450 Missoula, MT 800-332-1617 Kalispell, MT 800-434-4190 Billings, MT 800-735-2589
Fort Collins, CO 970-482-7154 Frederick, CO 800-490-6162 Colorado Springs, CO 800-364-3029 Pueblo West, CO 719-547-3505 Albuquerque, NM 505-884-2900 Farmington, NM 505-326-1101
HONNEN EQUIPMENT CO. www.honnen.com Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441
Ogden, UT 801-627-0049 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284
Page 32 • November 22, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Products shown with optional equipment.
MAULDIN Paving g Products... MASTERS S OF THE MA AT! T! Contact your MAULDIN N dealership today to see the newly redesigned 1860 Commercial Paver For more information visit us at www.4aMauldin.com.
Golden Equipment Company www.goldenequipment.com 721 Candelaria Rd NE Albuquerque, NM 87107 (505) 345-7811
1150 Madison Lane Farmington, NM 87401 (505) 326-1413
29268 Hwy 160 Durango, CO 81303 (970) 247-8830
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 22, 2020 • Page 33
POWER MOTIVE CORP. www.powermotivecorp.com 5000 Vasquez Blvd. Denver, CO 80216 303/355-5900 Grand Junction, CO 970/241-1550 Colorado Springs, CO 719-576-5541
Milliken, CO 970/587-1188 Durango, CO 970/259-0455 Cheyenne, WY 307/634-5149
FOUR SEASONS EQUIPMENT www.fourseasons-equip.com 8111 Mills Road Houston, TX 77064 800-234-5007 281-807-9777
Roads must be built. Worlds must be connected.
5524 West Ledbetter Drive Dallas, TX 75236 866-270-1700 214-388-1700
What began over a century ago... Evolved into a combination of experience and innovation.
CISCO EQUIPMENT www.cisco-equipment.com 1706 S. 1st Street Artesia, NM 88210 800-748-1846
520 SE Loop 338 Odessa, TX 800-657-3673
2707 Slaton Hwy Lubbock, TX 79404 877-745-9595
620 N. Bell St. San Angelo, TX 76903 800-496-0271
WESTRAX MACHINERY www.westraxmachinery.net 19618 S. Susana Road Rancho Dominguez, CA 90221 800-411-4717
611 N. Golden Key Street Gilbert, AZ 85233 602-397-8173
19885 Temescal Canyon Road Corona, CA 92881 800-411-4717
www.sakaiamerica.com (800) 323-0535
Page 34 • November 22, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 22, 2020 • Page 35
sÂŽÂŽ Ă?ÂŽĂŁ ĂŠ ě ĂŠÂĽ ĂŠ çÙ —››ƒ s ÂƒÂ˝Â› Ă™Ă? ĂŁĂŁĂŠ ʗ —ƒ ÂƒĂšÍŠ
APCO EQUIPMENT MENT APCO EQUIPMENT MENT
www.apcoequipment.com ent.com www.apcoequipment.com ent.com 3432 N 5th Street reet 3432 N 5th Street reet N. Las Vegas, Vegas, NV V 89032 N. Las Vegas, Vegas, NV V 89032 (800) 574-4089 89 (800) 574-4089 89
DYNAPAC SE S ISM I IC TECHNOLOGY – SH AKI NG U P CO MP ACTION
„
„ „ „
www.banemachinery ery.com
2449 Manana ery.com Rd. www.banemachinery Dallas, TX 75220 220 2449 Manana Rd. (214) 352-2468 68 Dallas, TX 75220 220 T Tyler yler, TX (214) 352-2468 68 (903) 597-6641 41 Tyler, TX Tyler Ft. Worth, TX X (903) 597-6641 41 (817) 847-5894 94 Ft. Worth, TX X (817) 847-5894 94
BANE MACHINER R RY Y, INC. INC BANE MACHINER R RY Y, INC.
www.cooperequip.com perequip.com www.cooperequip.com perequip.com
ROAD MACHINER RY Y ROAD MACHINER RY Y www.roadm machineryy.com .com www.roadm machineryy.com .com
www.clboyd.com com
COOPER EQUIPMENT QUIPMENT CO. COOPER EQUIPMENT QUIPMENT CO.
C L. C. L BOYD CO.,., INC. INC C. L. BOYD CO.,., INC.
4220 West Reno o Ave. www.clboyd.com com Oklahoma City, OK K 73107 4220 West Renoo Ave. (800) OKC-BOYD • (405) 5) 942-8000 Oklahoma City, OK K 73107 Ardmore, OK K 942-8000 (800) OKC-BOYD • (405) 5) (866) 720-2693 • (580)) 224-2693 Ardmore, OK K Lawton, OK K) 224-2693 (866) 720-2693 • (580) (800) 633-2693 • (580)) /355-6667 Lawton, OK K -2693 • (580)) /355-6667
902 S.. 7th Street 902 S.. 7th Street Phoenix, x, AZ 85034 Phoenix, x, AZ 85034 (480) 545-2400 (480) 545-2400 Tuscon, con, AZ Tuscon, con, AZ (520) 623-8681 (520) 623-8681 Prescott, scott, AZ Prescott, scott, AZ (928) 778-5621 (928) 778-5621 %DNHUUVĂ€HOG &$ %DNHUUVĂ€HOG &$ (661) 695-4830 (661) 695-4830 Perris, rris, CA Perris, rris, CA (909) 355-3600 (909) 355-3600 Pico Riviera, CA Pico Riviera, CA (562) 699-6767 (562) 699-6767
DOGGETT OGGETT HEA AVY VY MACHINER RY Y SERVICES DOGGETT OGGETT HEA AVY VY MACHINER RY Y SERVICES www.doggett.com www.doggett.com
9111 North Freeway Texas Houston, ton, TX 77037 (713) B3) 493-7396 Beaumont Beaumont, aumont, TX (409) 9) 842-1754 (409) 9)Bryan 600-9290 B9) 823-1905 Bryan, TX (979) (979) 9) 213-5985 Cor rpus Christi Corpus us289-0727 Christi, TX (361) 1) (361) H1) 371-8166 Houston Longview ngview, TX (713) 3) 679-6700 (903) L3) 470-7195 Longview L3)ufkin, TX (903) 758-3326 (936) 6)Lufkin 465-9743 San n Juan, TX (936) 6) 634-8801 (956) S6) 329-6024 San Juan Tyler, Tyler TX (956) 6) 787-0001 (903) 3)Tyler T707-8085 yler Vi3)ctoria, TX (903) 592-8900 (361) 1) V 433-5017 Victoria (361) 1) 570-6666
Alexandria, ria, LA Louisiana ana (318) 319-0394 9-0394 Baton Rouge, uge, Alexandria dria LA (225) 442-0455 330-8266 0-8266 (318) 2-0455 Broussard, rd, LA Baton Rouge (337) 291-3750 443-2517 3-2517 (225) -3750 Covington, on, LA Broussard sard (985) 837-9481 807-1393 7-1393 (337) 7-9481 Lake Charles, rles, LA Covington gton (337) 893-3005 405-7535 (985) 35-7535 3-3005 3005 Monroe, e,arles LA Lake Charles (318) 460-7480 0-7480 (337) 430-3045 0-3045 Shreveport, ort, LA Monroe oe (318) 532-6234 2-6234 (318) 343-8787 3-8787 St. Rose, e, LA Shreveport port (504) 507/1923 7/1923 (318) 631-3090 -3090 St. Rose ose (504) 466-5577 6-5577
dŚĞ ĆŒĹ˝Ä‚Äš ĆŒ ƚŽ Ć?ĆľÄ?Ä?ÄžĆ?Ć? Ć?ĆšÄ‚ĆŒĆšĆ? Ç Ĺ?ƚŚ ƚŚĞ ĆŒĹ?Ĺ?Śƚ Ć‰Ä‚ĆŒĆŒĆšĹśÄžĆŒĆ?ÍŠ The rroad to success starts with the right parrtners! ŽŜ͛ƚƚ ůĞƚ ÄšĹ˝Ç ĹśĆ&#x;žĞ ŏĞĞƉ LJŽƾ Ä¨ĆŒĹ˝Ĺľ Ĺ?ĞƚƚĹ?ĹśĹ? ƚŚĞ Ćš ĹŠĹ˝Ä? ŽŜ͛ƚƚ ůĞƚ ÄšĹ˝Ç ĹśĆ&#x;žĞ ŏĞĞƉ LJŽƾ Ä¨ĆŒĹ˝Ĺľ Ĺ?ĞƚƚĹ?ĹśĹ? ƚŚĞ Ćš ĹŠĹ˝Ä? ÄšĹ˝ĹśÄžÄžÍ˜ WÄ‚ĆŒĆšĹśÄžĆŒ Ç Ĺ?ƚŚ Ä‚ Ä?ŽžƉĂŜLJ Ç ĹšĹ˝ Ç Ĺ?ĹŻĹŻ Ç Ĺ˝ ĆŒĹŹ Ä‚Ć? ÄšĹ˝ĹśÄžÄžÍ˜ WÄ‚ĆŒĆšĹśÄžĆŒ Ç Ĺ?ƚŚ Ä‚ Ä?ŽžƉĂŜLJ Ç ĹšĹ˝ Ç Ĺ?ĹŻĹŻ Ç Ĺ˝ ĆŒĹŹ Ä‚Ć? ĹšÄ‚ĆŒÄš Ä‚Ć? LJŽƾ ĚŽ͕ Ĺ?ĞƍŜĹ? LJŽƾ ƚŚĞ Ć‰Ä‚ĆŒĆšĆ? LJŽƾ ŜĞĞĚ Ç Ĺ?ƚŚĹ?Ĺś ĹšÄ‚ĆŒÄš Ä‚Ć? LJŽƾ ĚŽ͕ Ĺ?ĞƍŜĹ? LJŽƾ ƚŚĞ Ć‰Ä‚ĆŒĆšĆ? LJŽƾ ŜĞĞĚ Ç Ĺ?ƚŚĹ?Ĺś ώϰͲŚŽ Ĺ˝ĆľĆŒĆ?Ύ͘ Guaranteed. d. ώϰͲŚŽ Ĺ˝ĆľĆŒĆ?Ύ͘ Guaranteed. d. ÎŽ'ĆľÄ‚ĆŒĆŒÄ‚ĹśĆšÄžÄž ĂƉƉůĹ?ÄžĆ? ƚŽ Ä?ĆŒÄžÄ‚ĹŹÄšĹ˝Ç Ĺś Ĺ˝ĆŒÄšÄžĆŒĆ? ƉůĂÄ?ĞĚ Ä‚Ä?Ä?Ĺ˝ Ĺ˝ĆŒÄšĹ?ĹśĹ? ÎŽ'ĆľÄ‚ĆŒ ĂƉƉůĹ?ÄžĆ? ƚŽ 'ĆľÄ‚ĆŒÄ‚ĹśĆšÄžÄž Ä?ĆŒÄžÄ‚ĹŹÄšĹ˝Ç Ĺś ĆšÄžĆŒĹľĆ? Ĺ˝ĆŒÄšÄžĆŒĆ? ƉůĂÄ?ĞĚ Ä‚Ä?Ä?Ĺ˝ Ĺ˝ĆŒÄšĹ?ĹśĹ? ƚŽ ĆšĹšĆŒÄ‚ĹśĆšÄžÄž Äž ĎŽĎ° ,Ĺ˝ĆľĆŒ WÄ‚ĆŒĆšĆ? ĂŜĚ Ä?ŽŜĚĹ?Ć&#x;ŽŜ ĹśĆ?͘ ƚŽ ƚŚĞ ĎŽĎ° ,Ĺ˝ĆľĆŒ WÄ‚ĆŒĆšĆ? 'ĆľÄ‚ĆŒÄ‚ĹśĆšÄžÄž ĆšÄžĆŒĹľĆ? ĂŜĚ Ä?ŽŜĚĹ?Ć&#x;ŽŜ ĹśĆ?͘
Visit dynapac.us/partsguarantee for detaails. Visit dynapac.us/partsguarantee for detaails.
Your Pa Partner on thee Road R Ahea ad
Follow Dyynapac North America
dynapaac.us | 800 -651- 00 033
Ćľ ŚŜŽůŽ ĆŒ Äž Äž Ŝƚ Ć? Ĺ? ĂžĂĹ?Äž Ä?ĹšĹ?ĹśÄžÍ˜
7651 Ronson onson Road 7651 Ronson onson Road San Diego, go, CA 92111 San Diego, go, CA 92111 (858) 278-8351 (858) 278-8351 1330 W Mission Road 1330 W Mission Road Escondido, do, CA A 92029 Escondido, do, CA A 92029 (760) 739-9100 (760) 739-9100 440 West st Aten Road 440 West st Aten Road Imperial, al, CA 92251 Imperial, al, CA 92251 (760) 355-7700 (760) 355-7700 4726 Convoy onvoy Street 4726 Convoy onvoy Street San Diego, go, CA 92111 San Diego, go, CA 92111 (858) 278-8338 (858) 278-8338
2506 Slaton Highway hway www.beeequipmentsales.com tsales.com Lubbock, TX 79404 9404 2506 Slaton Highway hway (806) 745-15111 Lubbock, TX 79404 9404 (806) 745-15111
www.clairemontequipment.com ontequipment.com www.clairemontequipment.com ontequipment.com
17474 Judson udson Road 5210 Loop 1604 17474NJudson RoadE San Antonio, TX 78247 San Antonio, TX 78247 (210) 657-5151 (210) 657-5151 201 Commerce mmerce Blvd. 201 Commerce mmerce Blvd. Georgetown, own, TX 78626 Georgetown, own, TX 78626 (512) 930-5151 (512) 930-5151
BEE EQUIPMENT SALES ALES LTD. L www.beeequipmentsales.com tsales.com BEE EQUIPMENT SALES ALES LTD. L
CLAIREMONT NT EQUIPMENT CLAIREMONT NT EQUIPMENT
Page 36 • November 22, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
www.modernmachinery.com Kent, WA (800) 669-2425
Pocatello, ID (800) 829-4450
Missoula, MT (800) 332-1617
Rochester, WA (800) 304-4421
Billings, MT (800) 735-2589
Eugene, OR (800) 826-9811
Spokane, WA (800) 541-0754
Kalispell, MT (800) 434-4190
Portland, OR (800) 950-7779
www.cooperequip.com 5210 N Loop 1604 E San Antonio, TX 78247 (210) 657-5151 201 Commerce City Blvd. Georgetown, TX 78626 (512) 930-5151
Boise, ID (800) 221-5211
KSM Hires Perkins, Product Specialists to Grow Division Kirby-Smith Machinery Inc. (KSM) has concrete product specialist Scott Prior — crushing and screening hired Robert Perkins as a paving and compaction specialist for its road construction product specialist Carlos Vega — product service manager, and minerals division. Perkins brings nearly two decades of experience related to both the crushing and screening Robert Perkins — paving and comheavy highway construction and heavy paction product specialist equipment industries to the Gary Corley — key position. account specialist “Robert has paved everyEach product specialist has thing from parking lots to a distinctive area of focus major highways in his career. related to industry application. He has an extensive operational Specialists will assist with knowledge of numerous types demonstrations and start-ups, of equipment, especially machine inspections and trainWirtgen Group. He will be an ing on the correct applications extremely valuable resource for for equipment. our paving customers,” said “Having a team of product Vern Gunderson, VP of road Robert Perkins specialists with a hyper-focus construction and minerals. The hiring of Perkins continues Kirby- on their area of expertise is essential to better Smith’s efforts to grow its team of product supporting our sales team and partnering specialists to better support customers oper- with our customers to ensure they get the ating in all forms of road construction and best experience possible out of their mineral/material processing. The division’s machines,” Gunderson said. For more information, call 888/861-0219 team of specialists includes: Jim Powell — milling, recycling and or visit kirby-smith.com.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 22, 2020 • Page 37
BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511 866/796-3211
KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com Oklahoma City, OK 800/375-3339 McAlester, OK 918/310-1550 Tulsa, OK 800/375-3733 Kansas City, KS 877/851-5729
ROMCO EQUIPMENT CO. www.romco.com Austin, TX 512/388-2529 877/851-1026 Buffalo, TX 903/322-5602 Dallas (Carrollton), TX 214/819-4100 800/227-6626 Ft. Worth, TX 817/626-2288 866/966-4602
Longview, TX 903/758-5576 Midland, TX 432/234-9409 San Antonio, TX 210/648-4600 800/966-4601
Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 22, 2020 • Page 39
see CHART page 40
MFG/ MODEL
FELLING FT-10 CL FT-12 CL FT-6 CL FT-3 Mini FT-10 (E,L,P) FT-10 I FT-10 WD FT-12 (E,L,P) FT-12 I FT-12 WD FT-14 (E,L,P) FT-14 I FT-14 WD FT-16 (E,P) FT-16 I FT-16 WD FT-20 I FT-20 WD FT-24 I FT-20-3 WD FT-24-3 (E) FT-30-3 I FT-3 FT-5 FT-10 IT-E FT-10 IT-I FT-10 T PAN TILT FT-12 IT-E FT-12 IT-I FT-12 T PAN TILT FT-14 IT-E FT-14 IT-I FT-14 T PAN TILT FT-16 IT-E FT-16 IT-I FT-16 T PAN TILT FT-20 IT-I FT-3 T PAN TILT FT-6 T PAN TILT FT-7 T-1 PAN TILT FT-5 EZ-T FT-7 EZ-T FT-12 EZ-T FT-10-2 FT-12-2 FT-14-2 FT-16-2 FT-18-2 FT-18-3 FT-20-2 / LP FT-20-3 FT-24-2 / LP FT-24-3 FT-30-2 / LP FT-30-3 FT-36-3 / LP FT-40-2 / LP FT-45-2 / LP Limited FT-45-2 / LP FT-45-3 / LP FT-50-3 / LP Limited FT-50-3 / LP FT-60-3 / LP FT-60-4 / LP FT-14-2T (TILT) FT-16-2T (TILT) FT-20-2T (TILT) FT-24-2T (TILT) FT-30-2T (TILT) FT-40-2T (TILT) FT-50-3T (TILT) FT-20-2 TA (AIR TILT) FT-24-2 TA (AIR TILT) FT-30-2 TA (Air Tilt) FT-40-2 TA (Air Tilt) FT-45-2 TA (Air Tilt) FT-50-3 TA (Air Tilt) FT-6 DT (Dump) FT-10 DT (Dump) FT-12-2 DT (Dump)
WEIGHT CAP. LBS. (KG)
EQUIP. WEIGHT EMPTY LBS. (KG)
7,480 (3,393) 11,100 (5,340) 5,000 (2,267) 2,330 (1,056) 7,480 (3,393) 7,000 (3,175) 7,380 (3,348) 11,100 (5,340) 11,520 (5,225) 11,000 (4,999) 12,900 (5,851) 12,500 (5,670) 12,900 (5,851) 14,800 (6,713) 14,400 (6,532) 14,700 (6,667) 18,400 (8,346) 19,000 (8,618) 21,080 (9,561) 17,100 (7756) 23,100 (10,477) 27,000 (12,247) 1,800 (816) 4,900 (2,223) 7,380 (3,348) 6,580 (2,985) 7,380 (3,348) 10,600 (4,808) 11,100 (5,035) 10,600 (4,808) 12,650 (5,737) 12,100 (5,488) 12,650 (5,737) 14,800 (6,713) 14,200 (6,441) 14,800 (6,713) 17,720 (8037) 1,800 (816) 5,350 (2,427) 6,200 (2,812) 4,550 (2,064) 5,600 (2,540) 10,300 (4,672) 6,180 (2,803) 8,900 (4,036) 10,900 (4,944) 12,600 (5,715) 14,900 (6,758) 14,900 (6,758) 20,000 (9,072) 17,000 (7,711) 24,000 (10,886) 24,000 (10,886) 30,000 (13,608) 29,700 (13,472) 36,000 (16,329) 36,320 (16,474) 45,000 (20,411) 45,000 (20,412) 45,000 (20,412) 50,000 (22,680) 50,000 (22,680) 60,000 (27,216) 60,000 (27,216) 10,700 (4,853) 12,800 (5,806) 19,500 (8,845) 24,000 (10,886) 30,000 (13,608) 36,320 (16,475) 50,000 (22,680) 19,700 (8,936) 24,000 (10,886) 30,000 (13,608) 36,320 (16,475) 45,000 (20,411) 50,000 (22,680) 4,500 (2,041) 7,000 (3,175) 10,000 (4,535)
2,500 (1,134) 2,900 (1,315) 1,900 (862) 660 (299) 2,500 (1,134) 2,980 (1,352) 2,600 (1,179) 2,700 (1,225) 2,980 (1,352) 2,800 (1,270) 3,200 (1,452) 3,600 (1,633) 3,200 (1,452) 3,600 (1,633) 4,000 (1,814) 3,700 (1,678) 4,600 (2,086) 4000 (1,814) 4,900 (2,222) 5,900 (2,676) 4,500 (2,041) 6,850 (3,107) 1,100 (499) 1,200 (544) 2,600 (1,179) 3,400 (1,542) 2,600 (1,179) 3,200 (1,452) 3,400 (1,542) 3,200 (1,452) 3,450 (1,565) 4,000 (1,814) 3,450 (1,565) 3,600 (1,633) 4,200 (1,905) 3,600 (1,633) 5,280 (2394) 1,100 (499) 1,650 (748) 1,800 (816) 1,550 (703) 1,750 (794) 3,500 (1,588) 3,800 (1,724) 4,900 (2,222) 5,200 (2,359) 5,800 (2,631) 5,800 (2,631) 5,800 (2,631) 5,900 (2,676) 5,900 (2,676) 6,500 (2,948) 6,100 (2,767) 7,300 (3,311) 7,600 (3,447) 8,250 (3,742) 8,600 (3,900) 9,400 (4,264) 8,900 (4,037) 9,900 (4,491) 11,000 (4,990) 10,700 (4,853) 11,400 (5,171) 12,700 (5,760) 5,400 (2,450) 5,600 (2,540) 6,400 (2,903) 7,300 (3,311) 8,300 (3,765) 9,200 (4,173) 11,200 (5,080) 6,200 (2,812) 8,500 (3,855) 9,200 (4,173) 9,200 (4,173) 9,200 (4,173) 11,200 (5,080) 2,500 (1,134) 2,980 (1,352) 4,000 (1,814)
DECK SIZE FT. (M) 14 (4.3) 14 (4.3) 10 (3) 8 (2.4) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 18 (5.5) 18 (5.5) 16 (4.9) 20 (6.1) 20 (6.1) 20 (6.1) 18 (5.5) 20 (6.1) 22 (6.7) 10 (3) 12 (3.7) 16 (4.9) 16 (4.9) 12 (3.7) 16 (4.9) 16 (4.9) 14 (4.3) 16 (4.9) 16 (4.9) 14 (4.3) 16 (4.9) 16 (4.9) 16 (4.9) 24 (7.3) 10 (3) 12 (3.7) 14 (4.3) 8.5 (4) 11.5 (5.2) 18.5 (8.4) 16+5 18+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+6 20+5 24+5 24+6 24+5 24+6 28+5 22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24+6 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 8 (2.4) 10 (3) 12 (3.7)
MFG/ MODEL
WEIGHT CAP. LBS. (KG)
FELLING CONT. FT-12 DT HD (Dump) FT-14-2 DT (Dump) FT-14 DT HD (Dump) FT-16-2 DT (Dump) FT-16 DT HD (Dump) FT-20-2 DT (Dump) FT-24-2 DT (Dump) FT-30-2 DT (Dump) FT-12E SD(Side Dump) FT-14E SD(Side Dump) FT-16E SD(Side Dump) FT-3GEN (Generator) FT-6GEN (Generator) FT-7GEN (Generator) FT-7-1GEN (Generator) FT-10GEN (Generator) FT-12GEN (Generator) FT-14GEN (Generator) FT-16GEN (Generator) FT-20GEN (Generator) FT-24GEN (Generator) FT-3 Coil FT-6 Coil FT-10 UPT (Pole) FT-12 UPT (Pole) FT-15 UPT (Pole) FT-20 UPT (Pole) FT-24 UPT (Pole) FT-30 UPT (Pole) FT-40 UPT (Pole) FT-12 UPT-C (Pole/Cargo) FT-14 UPT-C (Pole/Cargo) FT-16 UPT-C (Pole/Cargo) FT-20 UPT-C (Pole/Cargo) FT-3 R (Reel) FT-6 R (Reel) FT-8 R (Reel) FT-10 R (Reel) FT-14-2 R (Reel) FT-14-2 R Turret (Reel) FT-14-2 R Double Reel FT-50-2 MX (Semi) FT-70-2 MX (L,H) (Semi) FT-80-2 MX (L,H) (Semi) FT-80-3 MX (L,H) (Semi) FT-100-3 MX (L,H) (Semi) FT-100-4 MX (L,H) (Semi) FT-70-2 NN-HX (Semi) FT-70-2 NN-LX (Semi) FT-80-3 NN-HX (Semi) FT-80-3 NN-LX (Semi) FT-100-3 NN-HX (Semi) FT-100-3 NN-LX (Semi) FT-70-2 PH-HT (Semi) FT-70-2 PL-HT (Semi) FT-80-2 PH-HT (Semi) FT-80-2 PL-HT (Semi) FT-80-3 PH-HT (Semi) FT-80-3 PL-HT (Semi) FT-100-3 PH-HT (Semi) FT-100-3 PL-HT (Semi) FT-70-2 HX (Semi) FT-80-2 HX (Semi) FT-80-3 HX (Semi) FT-100-3 HX (Semi) FT-70-2 OTR-L (Semi) FT-80-2 OTR-L (Semi) FT-80-3 OTR-L (Semi) FT-100-3 OTR-L (Semi) FT-70-2 OTR-H (Semi0 FT-80-2 OTR-H (Semi) FT-80-3 OTR-H (Semi) FT-100-3 OTR-H (Semi) FT-24 S (Sprayer) FT-30 S (Sprayer) FT-40 S (Sprayer) FT-24 WT FT-30 WT FT-40 WT FT-24 TS
9,900 (4,490) 11,700 (5,307) 11,900 (5,397) 13,100 (5,942) 13,600 (6,168) 17,100 (7,756) 20,200 (9,163) 26,500 (12,020) 10,300 (4,672) 12,100 (5,488) 14,400 (6,531) 2,850 (1,293) 5,300 (2,404) 6,100 (2,767) 6,350 (2880) 7,480 (3,393) 10,300 (4,672) 12,400 (5,624) 14,400 (6,532) 18,000 (8,165) 22,400 (10,160) 1,800 (816) 6,000 (2,721) 7,980 (3,620) 10,250 (4,649) 13,675 (6,203) 18,550 (8,414) 23,100 (10,478) 29,950 (13,585) 36,658 (16,628) 8,600 (3,900) 10,700 (4,853) 12,800 (5,805) 17,100 (7,756) 1,890 (857) 6,080 (2,758) 7,200 (3,266) 9,400 (4,263) 13,200 (5,987) 16,100 (7,302) 12,800 (5,806) 50,000 (22,680) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 79,700 (36,151) 80,000 (36,287) 100,000 (45,359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 24,000 (10,886) 36,320 (16,474) 36,320 (16,474) 24,000 (10,886) 30,000 (13,608) 36,320 16,474() 24,000 (10,886)
EQUIP. WEIGHT EMPTY LBS. (KG)
DECK SIZE FT. (M)
3,900 (1,769) 12 (3.7) 4,400 (1,996) 12 (3.7) 4,200 (1,905) 12 (3.7) 5,300 (2,404) 14 (4.3) 4,800 (2,177) 12 (3.7) 5,900 (2,676) 14 (4.3) 7,400 (3,357) 14 (4.3) 8,000 (3,629) 14 (4.3) 3,500 (1,588) 14+5 4,000 (1,814) 14+5 4,000 (1,814) 18+5 1,000 (454) 6 (1.8) 1,300 (590) 8 (2.4) 1,600 (725) 10 (3) 1,350 (612) 10 (3) 2,500 (1,134) 12 (3.7) 2,900 (1,315) 12 (3.7) 3,000 (1,361) 12 (3.7) 3,200 (1,452) 14 (4.3) 4,000 (1,814) 18 (5.5) 4,000 (1,814) 18 (5.5) 1,100 (499) 8 (2.4) 1,500 (680) 8 (2.4) 3,520 (1,597) 20-30 (6-9) Opt. 24-40 (7-12) 3,550 (1,610) 20-30 (6-9) Opt. 24-40 (7-12) 3,575 (1,622) 20-30 (6-9) Opt. 24-40 (7-12) 4,450 (2,018) 24-40 (7-12) Opt. 29-46 (9-14) 4,500 (2,041) 24-40 (7-12) Opt. 29-46 (9-14) 4,550 (2,041) 24-40 (7-12) Opt. 29-46 (9-14) 5,110 (2,317) 29-46 (13 - 21) 5,200 (2,359) 20-30 (6-9) Cargo 10 (3) 5,400 (2,449) 20-30 (6-9) Cargo 10 (3) 5,600 (2,540) 20-30 (6-9) Cargo 10 (3) 5,900 (2,676) 20-30 (6-9) Cargo 10 (3) 1,100 (499) 12 (3.7) 1,920 (871) 12 (3.7) 2,000 (907) 12 (3.7) 2,100 (953) 12 (3.7) 2,900 (1,315) 15 (4.5) 3,000 (1,361) 15 (4.5) 3,300 (1,497) 23 (7.5) 12,000 (5,443) 34 (10.4) 12,500 (5,670) 38 (11.6) 12,800 (5,806) 38 (11.6) 15,900 (7,212) 38 (11.6) 17,300 (7,847) 38 (11.6) 19,500 (8,845) 38 (11.6) 10,500 (4,763) 39 (11.9) 10,500 (4,763) 39 (11.9) 12,500 (5,670) 44 (13.4) 12,500 (5,670) 44 (13.4) 13,500 (6,123) 44 (13.4) 13,500 (6,123) 44 (13.4) 16,000 (7,257) 45 (13.7) 17,000 (7,711) 45 (13.7) 17,000 (7,711) 45 (13.7) 17,000 (7,711) 45 (13.7) 20,500 (9,299) 45 (13.7) 20,500 (9,299) 45 (13.7) 21,500 (9,752) 45 (13.7) 21,000 (9,525) 45 (13.7) 12,500 (5,669) 48 (14.6) 12,800 (5,806) 48 (14.6) 14,250 (6,464) 48 (14.6) 14,700 (6,668) 48 (14.6) 12,500 (5,669) 48 (14.6) 12,500 (5,669) 48 (14.6) 15,000 (6,804) 48 (14.6) 16,500 (7,484) 48 (14.6) 12,500 (5,669) 48 (14.6) 12,900 (5,851) 48 (14.6) 15,000 (6,804) 48 (14.6) 16,500 (7,484) 48 (14.6) 6,600 (2,994) 20 (6.1) 8,100 (3,674) 22 (6.7) 8,100 (3,674) 22 (6.7) 6,600 (2,994) 20 (6.1) 7,300 (3,311) 22 (6.7) 8,100 (3,674) 22 (6.7) 6,600 (2,994) 20 (6.1)
Page 40 • November 22, 2020 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide
CHART from page 39
MFG/ MODEL
see CHART page 42
WEIGHT CAP. LBS. (KG)
FELLING CONT. FT-30 TS FT-40 TS FT-12-2 TT (Tender) FT-14-2 TT (Tender) FT-16-2 TT (Tender) FT-18-2 TT (Tender) FT-20-2 TT (Tender) FT-24-2 TT (Tender) FT-30-2 TT (Tender) FT-40-2 TT (Tender) FT-45-2 TT (Tender) FT-45-3 TT (Tender) FT-50-2 (NN) TT (Tender) FT-70-2 (NN) TT (Tender) FT-75-2 (NN) TT (Tender) FT-80-3 (NN) TT (Tender) FT-100-4 (NN) TT (Tender) XF-70-2 HDG XF-80-2 HDG XF-80-3 HDG XF-100-2 HDG XF-100-3 HDG XF-110-2 HDG XF-110-3 HDG XF-120-3 HDG XF-70-2 HDG-L XF-80-2 HDG-L XF-100-2 HDG-L XF-100-3 HDG-L XF-110-3 HDG-L XF-120-3 HDG-L XF-HD-100-3 HDG XF-HD-110-3 HDG XF-HD-120-3 HDG XF-100-3 HDG-SL XF-110-3 HDG-SL XF-120-3 HDG-SL XF-AG-70-2 HDG XF-AG-100-2 HDG XF-AG-100-3 HDG XF-AG-110-3 HDG XF-AG-70-2 HDG-L XF-AG-80-3 HDG-L XF-AG-100-3 HDG-L XF-AG-110-3 HDG-L XF-Flip 20-1 XF-Jeep 80-2 FT-50-2 RGT-L FT-70-3 RGT-L
MFG/ MODEL
30,000 (13,608) 36,320 (16,474) 14,000 (6,350) 14,000 (6,350) 16,000 (7,257) 18,000 (8,165) 20,000 (9,072) 24,000 (10,886) 30,000 (13,608) 36,320 (16,474) 45,000 (20,411) 45,000 (20,411) 50,000 (22,680) 70,000 (31,752) 75,000 (34,019) 80,000 (36,287) 100,000 (45,359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431) 70,000 (31,752) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 70,000 (31,751) 80,000 (36,287) 100,000 (45,359) 110,000 (49,895) 20,000 (9,071) 80,000 (36,287) 50,000 (22,680) 70,000 (31,752)
TRAILER TYPE
ROGERS BROTHERS TAG21XL TAG21XL-Air Ramps TAG21XXL TAG21XXL-Air Ramps TAG25XL TAG25XL-AL TAG25XXL TAG25XXL-AL TAG25XXL-AL-Air Ramps TVT25 TVT35 MH25 MH35 PT35 CR40PL CR40PL-R3 CR35GR CY50PL SP55PL SP55GR CN55PL CN55GR
Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Fixed Gooseneck Fixed Gooseneck Fixed Gooseneck Fixed Gooseneck Fixed Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck
EQUIP. WEIGHT EMPTY LBS. (KG) 7,300 (3,311) 8,100 (3,674) 3,200 (1,451) 2,600 (1,179) 2,800 (1,270) 3,200 (1,451) 5,900 (2,676) 7,300 (3,311) 4,500 (2,041) 6,400 (2,903) 6,800 (3,084) 6,800 (3,084) 7,500 (3,402) 10,000 (4,536) 11,000 (4,990) 12,000 (5,443) 18,000 (8,165) 14,500 (6,577) 15,500 (7,031) 18,200 (8,255) 16,200 (7,348) 18,200 (8,255) 15,500 (7,031) 18,500 (8,391) 19,500 (8,845) 15,300 (6,940) 16,000 (7,257) 17,000 (7,711) 18,700 (8,482) 19,000 (8,618) 20,000 (9,072) 18,700 (8,482) 19,000 (8,618) 20,000 (9,072) 18,900 (8,573) 19,500 (8,845) 20,500 (9,299) 16,500 (7,484) 22,700 (10,296) 23,200 (10,523) 23,000 (10,432) 17,200 (7,801) 23,200 (10,523) 23,800 (10,795) 23,200 (10,523) 2,500 (1,133) 7,500 (3,401) 14,300 (6,486) 16,600 (7,530)
WEIGHT CAP. LBS. (KG) 42,000 (19,051) 42,000 (19,051) 42,000 (19,051) 42,000 (19,051) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 70,000 (31,751) 50,000 (22,680) 70,000 (31,751) 70,000 (31,751) 80,000 (36,287) 80,000 (36,287) 70,000 (31,751) 100,000 (45,359) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431)
DECK SIZE FT. (M) 20 (6.1) 20 (6.1) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 16 (4.9) 16 (4.9) 16 (4.9) 24 (7.3) 33 (10.1) 38 (11.6) 38 (11.6) 42 (12.8) 48 (14.6) 22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 38 (11.6) 40 (12.2)
MFG/ MODEL
LANDOLL LT1016A LT1016+4A LT1020A LT1220A LT1420A LT1422A L2024A L2424A L4024A L5029A 317E-46 317E-48 317E-51 3.18E-46 318E-48 318E-51 440B-48 440B-50 440B-53 455B-48 455B-50 455B-53 835-23-43 835-27-47 835-30-50 835-32-52 835-23-44 835-27-48 835-30-51 835-32-53 855-53 855-53 (10'9"N) 855-54 860 135C-43 150C-45 150C-48 930E-45-12 930E-48-12 930E-48-15 930E-51-15 950E-48-12 950E-48-15 950E-51-15 950E-52-14 950E-53-15
WEIGHT CAP. LBS. (KG)
EQUIP. WEIGHT EMPTY LBS. (KG)
10,000 (4,535) 10,000 (4,535) 10,000 (4,535) 12,000 (5,443) 14,000 (6,350) 14,000 (6,350) 20,000 (9,072) 24,000 (10,886) 40,000 (18,144) 50,000 (22,680) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359)
3,150 (1,428) 3,500 (1,587) 3,150 (1,428) 3,700 (1,678) 4,200 (1,905) 4,700 (2,132) 5,900 (2676) 6,000 (2721) 8,500 (3,855) 10,200 (4,627) 16,560 (7,511) 18,340 (8,319) 19,700 (8,936) 20,580 (9,335 ) 21,000 (9,525) 22,000 (9,979) 18,200 (8,255) 19,400 (8,800) 19,900 (9,026) 20,190 (9,158) 22,870 (10,374) 24,060 (10,913) Consult Factory Consult Factory 17,740 (8046) Consult Factory Consult Factory Consult Factory 17,740 (8046) Consult Factory 23,900 (10,840) Consult Factory Consult Factory 25,400 (11,521) 13,450 (6,100) 17,640 (8,001) 17,055 (7,736) 17,265 (7,831) 17,660 (8,010) 18,770 (8,513) 19,250 (8,731) 20,413 (9,259) 21,419 (9,738) 21,560 (9,779) 21,780 (9,879) 21,900 (9,933)
EQUIP. WEIGHT EMPTY LBS. (KG)
DECK SIZE FT. (M)
SUSPENSION TYPE
NO. OF AXLES
8,910 (4,042) 9,750 (4,423) 9,410 (4,268) 10,100 (4,581) 10,880 (4,935) 10,800 (4,898) 11,940 (5,416) 11,860 (5,380) 12,740 (5,779) 10,630 (4,822) 12,500 (5,670) 12,490 (5,665) 14,700 (6,668) 16,550 (7,507) 15,480 (7,022) 16,955 (7,691) 18,300 (8,301) 19,020 (8,627) 21,070 (9,557) 26,400 (11,975) 25,590 (11,607) 26,140 (11,857)
22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 18x8.5 (5.5x2.6) 20x8.5 (6.1x2.6) 22x8.5 (6.7x2.6) 24x8.5 (7.3x2.6) 25x8.5 (7.6x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 26x8.5 (7.9x2.6) 24x8.5 (7.3x2.6)
Spring Spring Spring Spring Spring Spring / Air (w/lift) Spring / Air (w/lift) Spring / Air (w/lift) Spring / Air (w/lift) Spring Spring Spring Spring Air Air Air Air Air Air (w/3rd axle lift) Air (w/3rd axle lift) Air (w/3rd axle lift) Air (w/3rd axle lift)
2 2 2 2 3 3 3 3 3 2 2 2 2 2 2 3 2 3 3 3 3 3
DECK SIZE FT. (M) 16x8.5(4.8x2.6) 16x8.5(4.8x2.6) 20x8.5(6.1x2.6) 20x8.5(6.1x2.6) 20x8.5(6.1x2.6) 22x8.5(6.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 29x8.5 (8.8x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 23x8.5 (7.01x2.6) 27x8.5 (9.64x2.6) 30x8.5 (16.6x2.6) 32x8.5 (9.75x2.6 23x8.5 (7.01x2.6) 27x8.5 (8.22x2.6) 30x8.5 (9.14x2.6) 32x8.5 (9.75x2.6 26x8.5 (7.9x2.6) 27x8.5 (9.64x2.6) 27x8.5 (9.64x2.6) 26x8.5 (7.9x2.6) 43x8.5 (13.1 x 2.6) 45x8.5 (13.7 x 2.6) 48x8.5 (14.6x2.6) 45x8.5 (13.7 x 2.6) 48x8.5 (14.6x2.6) 48x8.5 (14.6x2.6) 51x8.5 (15.5x2.6) 48x8.5 (14.6x2.6) 48x8.5 (14.6x2.6) 51x8.5 (15.5x2.6) 52x8.5 (15.5x2.6) 53x8.5 (15.5x2.6)
FEATURE
Air Ramps
Air Ramps Air Ramps
Full Width GN Full Width GN Air Ramps Gentle Riser Gentle Riser
Gentle Riser
Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 22, 2020 • Page 41
4VYL 4VKLSZ -VY 4VYL 4HYRL[Z
0; 0 :LYPLZ
0UK\Z[YPHS ;PS[
,A ;PS[
*(33 c =PZP[ ^^^ -LSSPUN JVT *,. c [YHPSLYZ'MLSSPUN JVT
0:6 ! *LY[PMPLK 8\HSP[` 4HUHNLTLU[ :`Z[LT à ® >),5* *LY[PMPLK >), à ® ,X\HS 6WWVY[\UP[` ,TWSV`LY
Page 42 • November 22, 2020 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide
CHART from page 40
MFG/ MODEL
see CHART page 44
WEIGHT CAP. LBS. (KG)
EAGER BEAVER SK5 SK6 SK7 SK8 SK9 B6DOW B8DOW B9DOW 10HDB-PT 10HA-PT 12HDB-PT 12HA-PT 15HDB-PT 20XPT 25XPT 25XPL 25GLB 35GLB 35GSL/S4S 35GSL/S 35GSL/BR 35GSL-PT 50GLB 50GSL/3 50GSL/BR 50GSL-PT 55GSL/3 55GSL/PT 60GSL/3 60GSL/PT 65GSL/3 70GSL/3 50GLB/OF (Oil Field) 60GLB/4-OF (Oil Field) 70GLB/5-OF (Oil Field)
MFG/ MODEL
SMITHCO. SX1-2317 SX2-3024 SX2-3327 SX2-4034 SX3-3734 SX3-4234 SX3-4436 SX3-4636 SX3-4936 SX4-3734 SX4-4636 SX4-4936 SX5-3734 SX5-4636 SX5-4936 S2-4034-MHVSR S2-4236-MHVSR S3-4234-MHVSR S3-4436-MHVSR S3-4636-MHVSR S2-4034-SHV S2-4236-SHV S3-4234-SHV S3-4436-SHV S3-4636-SHV CP-20 CP-30 50 Ton Mine Series 60 Ton Mine Series 70 Ton Mine Series 80 Ton Mine Series 90 Ton Mine Series 100 Ton Mine Series
10,000 (4,536) 12,000 (5,442) 14,000 (6,350) 16,000 (7,257) 18,000 (8,165) 12,000 (5,442) 16,000 (7,257) 18,000 (8,163) 20,000 (9,070) 20,000 (9,070) 24,000 (10,884) 24,000 (10,884) 30,000 (13,605) 40,000 (18,140) 50,000 (22,675) 50,000 (22,675) 50,000 (22,675) 70,000 (31,745) 70,000 (31,745) in 12 ft. 70,000 (31,745) in 12 ft. 70,000 (31,745) in 12 ft. 70,000 (31,745) in 16 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 16 ft. 110,000 (49,885) in 12 ft. 110,000 (49,885) in 16 ft. 120,000 (54,420) in 12 ft. 120,000 (54,420) in 16 ft. 130,000 (58,967) in 12 ft. 140,000 (63,503) in 12 ft. 100,000 (45,350) in 12 ft. 120,000 (54,420) in 12 ft. 140,000 (63,500) in 16 ft.
EQUIP. WEIGHT EMPTY LBS. (KG)
SUSPENSION TYPE
3,250 (1,474) 3,370 (1,529) 3,570 (1,619) 3,700 (1,678) 4,100 (1,860) 4,200 (1,905) 4,800 (2,177) 4,600 (2,086) 5,800 (2,630) 5,880 (2,667) 6,450 (2,925) 6,530 (2,961) 8,100 (3,673) 8,380 (3,800) 11,720 (5,315) 11,720 (5,315) 11,600 (5,261) 13,900 (6,304) 15,500 (7,029) 15,900 (7,211) 17,100 (7,755) 18,200 (8,253) 23,000 (10,432) 20,500 (9,297) 21,600 (9,795) 22,700 (10,297) 22,500 (10,206) 23,425 (10,625) 22,750 (10,773) 24,500 (11,115) 26,500 (12,020) 27,790 (12,605) 21,600 (9,797) 25,120 (11,393) 28,600 (12,972)
Torflex Torflex Torflex Torflex Torflex Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Spring/Lift Axle Leaf Spring Single Point Spring Leaf Spring Single Point Spring Single Point Spring Air Ride Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle
DECK SIZE WxL FT. (M)
NO. OF AXLES
14 (4.3) 14 (4.3) 16 (4.9) 16 (4.9) 16 (4.9) 20x8 (6.1x2.4) 20x8 (6.1x2.4) 20x8 (6.1x2.4) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 28x8.5 (8.5x2.6) 28x8.5 (8.5x2.6) 18x8.5 (5.5x2.6) 18x8.5 (5.5x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 39x8.5 (17.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 40x8.5 (12.2x2.6) 43x8.5 (13.1x2.6) 43.5x8.5 (13.2x2.6)
WEIGHT CAP. LBS. (KG)
EQUIP. WEIGHT EMPTY LBS. (KG)
DECK SIZE FT. (M)
50,000 (22,680) 60,000 (27,216) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 40,000 (18,144) 60,000 (27,216) 100,000 (45,359) 120,000 (54,431) 140,000 (63,503) 160,000 (72,575) 180,000 (86,183) 200,000 (90,718)
10,500 (4,743) 12,400 (5,625) 13,100 (5,942) 14,100 (6,396) 16,300 (7,394) 16,700 (7,575) 17,100 (,7756) 17,500 (7,938) 17,800 (8,074) 19,500 (8,845) 19,800 (8,981) 20,050 (9,095) 20,700 (9,389) 21,000 (9,525) 21,300 (9,662) 14,400 (6,532) 14,700 (6,668) 17,200 (7,802) 17,400 (7,893) 17,600 (7,983) 14,600 (6,622) 14,800 (6,713) 17,600 (7,983) 17,900 (8,119) 18,100 (8,210) 17,000 (7,711) 18,500 (8,391) Varies due to options Varies due to options Varies due to options Varies due to options Varies due to options Varies due to options
17 (5.2) 24 (7.3) 27 (8.2) 34 (10.4) 34 (10.4) 34 (10.4) 36 (11) 36 (11) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 34 (10.4) 36 (11) 36 (11) 24 (7.3) 22 (6.7) Built to Order Built to Order Built to Order Built to Order Built to Order Built to Order
2 2 2 2 2 2 2 3 2 2 2 2 2 2 3 3 2 2 2 2 2 2 3 3 3 3 3 or 4 3 or 4 3 or 4 3 or 4 3 to 7 3 to 7 3 4 5
NO. OF AXLES 1 2 2 2 3 3 3 3 3 4 4 4 5 5 5 2 2 3 3 3 2 2 3 3 3 2 2 3 3-4 3-4 3-4 4 4
SPEED RATING MPH (KPH) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104)
SPEED RATING MPH (KPH) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 20 (32) 20 (32) 45 (72) 45 (72) 45 (72) 45 (72) 45 (72) 45 (72)
Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 22, 2020 • Page 43
Page 44 • November 22, 2020 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide
CHART from page 42
MFG/ MODEL
BAUER SDT36 SDT27
WEIGHT CAP. LBS. (KG)
EQUIP. WEIGHT EMPTY LBS. (KG)
SUSPENSION TYPE
DECK SIZE FT. (M)
NO. OF AXLES
SPEED RATING MPH (KPH)
80,000 (36,287) 60,000 (27,216)
30,000 (13,608) 22,500 (10,206)
Hydraulic Hydraulic
24 (7.3) 18 (5.5)
3 2
20 (32.2) 20 (32.2)
STANDARD DECK LENGTH FT. (M)
LOADED DECK LENGTH FT. (M)
MFG/ MODEL
FONTAINE HH
WEIGHT CAP. LBS. (KG)
(a) - Extendable Trailer - Rating In fully retracted position
Fontaine Heavy-Haul Renegade N12 Fontaine Heavy-Haul Renegade 14 Fontaine Heavy-Haul Renegade N14 Fontaine Heavy-Haul Renegade 18 Fontaine Heavy-Haul Renegade N18 Fontaine Heavy-Haul Renegade 20 Fontaine Heavy-Haul Renegade N20 Fontaine Heavy-Haul Renegade 20C Fontaine Heavy-Haul Renegade X20 Fontaine Heavy-Haul Renegade XN20 Fontaine Heavy-Haul Renegade X20C Fontaine Heavy-Haul Workhorse 50 Fontaine Heavy-Haul Workhorse 51 Fontaine Heavy-Haul Workhorse 55LCC Fontaine Heavy-Haul Magnitude 55L Plus Fontaine Heavy-Haul Magnitude 60LCC Fontaine Heavy-Haul Magnitude 55H FLD Fontaine Heavy-Haul Magnitude 55H DSR Fontaine Heavy-Haul Magnitude 55H MFLD Fontaine Heavy-Haul Magnitude 55H MDSR Fontaine Heavy-Haul Magnitude 55H MBMD Fontaine Heavy-Haul Magnitude 55MX Fontaine Heavy-Haul Magnitude 60 MFLD (3+1) Fontaine Heavy-Haul Magnitude 60 MDSR (3+1) Fontaine Heavy-Haul Magnitude 60 MBMD (3+1) Fontaine Heavy-Haul Magnitude 60HD MFLD (3+2) Fontaine Heavy-Haul Magnitude 60HD MDSR (3+2) Fontaine Heavy-Haul Magnitude 60HD MBMD (3+2) Fontaine Heavy-Haul Magnitude 65 MFLD Fontaine Heavy-Haul Magnitude 65 MDSR Fontaine Heavy-Haul Magnitude 65 MBMD Fontaine Heavy-Haul Magnitude 75 MFLD Fontaine Heavy-Haul Magnitude 75 MDSR Fontaine Heavy-Haul Magnitude 75 MBMD Fontaine Heavy-Haul Magnitude 80 MFLD Fontaine Heavy-Haul Magnitude 80 MDSR Fontaine Heavy-Haul Magnitude 80 MBMD Fontaine Heavy-Haul Xcalibur 4880 Fontaine Heavy-Haul Xcalibur 5390 Fontaine Heavy-Haul TraverseHT
MFG/ MODEL
XL
EQUIP. WEIGHT EMPTY LBS. (KG)
XL 80 Low-Profile HDG XL 110 Low-Profile HDG XL 110 Low-Profile HDG: 18" Deck XL 110 Low-Profile HDG: 15" Deck XL 120 Low-Profile HDG XL 110 Cheater HDG XL 80 SDE (Step Deck Extendable) XL 120 SDE (Step Deck Extendable) XL 70 MFG (Mechanical Full-width Gooseneck) XL 100 HFG (Hydraulic Folding Gooseneck) XL 70 MDE (Mechanical Detachable Extendable) XL 80 MDE (Mechanical Detachable Extendable) XL 90 MDE (Mechanical Detachable Extendable) XL 80 HDE (Hydraulic Detachable Extendable) XL 90 HDE (Hydraulic Detachable Extendable) XL 100 HDE (Hydraulic Detachable Extendable) XL 110 HDE (Hydraulic Detachable Extendable) XL 120 HDE (Hydraulic Detachable Extendable) XL 80 Power Tail
60,000 (27,216) in 16 ft. (4.9) 60,000 (27,216) in 16 ft. (4.9) 60,000 (27,216) in 16 ft. (4.9) 80,000 (36,287) distributed 80,000 (36,287) distributed 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 100,000 (45,359) in 12 ft. (3.7) 102,000 (46,266) in 12 ft. (3.7) 110,000 (49,895) in 13 ft. (4.0) 110,000 (49,895) in 12 ft. (3.7) 120,000 (54,431) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 16 ft. (4.9) (a) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 140,000 (63,503) in 12 ft. (3.7) Up to 140,000 (63,503) in 12 ft. (3.7) Up to 140,000 (63,503) in 12 ft. (3.7) Up to 150,000 (63,503) in 12 ft. (3.7) Up to 150,000 (63,503) in 12 ft. (3.7) Up to 150,000 (63,503) in 12 ft. (3.7) Up to 180,000 (81,647) in 16 ft. (4.9) Up to 180,000 (81,647) in 16 ft. (4.9) Up to 180,000 (81,647) in 16 ft. (4.9) 80,000 (36,287) distributed (a) 80,000 (36,287) distributed (a) 80,000 (36,287) distributed
WEIGHT CAP. LBS. (KG) 80,000 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431) 110,000 (49,895) 80,000 (36,287) 120,000 (54,431) 70,000 (31,751) 100,000 (45,359) 70,000 (31,751) 80,000 (36,287) 90,000 (40,823) 80,000 (36,287) 90,000 (40,823) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 80,000 (36,287)
20,525 (9,310) 18,390 (8,348) 19,215 (8,723) 15,340 (7,321) 16,165 (7,820) 15,340 (7,203) 16,165 (7,332) 15,340 (6,965) 20,040 (9,376) 20,865 (9,464) 20,040 (9,097) 18,720 (8,677) 20,200 (9,235) 22,040 (9,997) 22,960 (10,414) 24,260 (11,004) 21,640 (9,816) 22,635 (10,267) 21,940 (9,952) 22,935 (10,403) 20,635 (9,237) 27,110 (12,297) 24,990 (11,335) 25,190 (11,426) 22,410 (10,165) 28,960 (13,136) 29,160 (13,227) 26,020 (11,802) 32,400 (14,698) 32,646 (14,808) 27,501 (12,474) 34,914 (15,837) 35,160 (15,948) 30,015 (13,615) 37,620 (17,064) 38,860 (17,627) 36,860 (16,719) 16,190 (7,344) 17,380 (7,883) 17,700 (8,029)
(b) - Modular bogie connection 32.91 (10.0) 29.2 (8.9) 29.2 (8.9) 29 (8.8) 29 (8.8) 29 (8.8) 29 (8.8) 27.6 (8.4) 29 - 50 (8.8 - 15.2) 29 - 50 (8.8 - 15.2) 27.6 - 47.2 (8.4 - 14.4) 24 (7.1) 25 (7.6) 26 (7.9) 25, 26, 27 (7.6, 7.9, 8.2) 25, 26, 27 (7.6, 7.9, 8.2) 25, 26, 27 (7.6, 7.9, 8.2) 26 (7.9) 25, 26, 27 (7.6, 7.9, 8.2) 26 (7.9) 26 (7.9) 29 - 50 (8.8 - 15.2) 25, 26 (7.6, 7.9) 25, 26 (7.6, 7.9) 25, 26 (7.6, 7.9) 26 (7.9) 26 (7.9) 26 (7.9) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 48 - 80 (14.6 - 24.4) 53 - 90 (16.2 - 27.4) 38.1 (11.6)
NO. OF SPEED RATING GOOSENECK AXLES MPH (KPH) STYLE
(c) - Axle count includes trailer & booster; does not include optional jeep 12 (30.5) 14 (35.6) 14 (35.6) 18 (45.7) 18 (45.7) 20 (50.8) 20 (50.8) 20 (50.8) 20 (50.8) 20 (50.8) 20 (50.8) 24 (60.9) 22 (55.9) 18 (45.7) 18 (45.7) 18 (45.7) 22 (55.9) 14.5 (36.8) @ Drop Side (b) 22 (55.9) (b) 14.5 (36.8) @ Drop Side (b) Beam/Rail Deck (b) 20 (50.8) (b) 22 (55.9) (b) 14.5 (36.8) @ Drop Side (b) Beam/Rail Deck (b) 22 (55.9) (b) 14.5 (36.8) @ Drop Side (b) Beam/Rail Deck (b) 24 (61) (b) 14.75 @ Drop Side (b) Beam/Rail Deck (b) 24 (61) (b) 15.0 (38.1) @ Drop Side (b) Beam/Rail Deck (b) 24 (61) (b) 16.0 (40.6) @ Drop Side (b) Beam/Rail Deck (b) 59 (149.9) 60 (152.4) 35 (88.9)
2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 3 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 6 (c) 3 to 6 (c) 3 to 6 (c) 2 or 3 2 or 3 2
55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5)
Hydraulic Mechanical Hydraulic Mechanical Hydraulic Mechanical Hydraulic Mechanical Mechanical Hydraulic Mechanical Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Flatbed Flatbed Stepdeck
CONCENTRATED WEIGHT LBS. (KG)
DECK SIZE FT. (M)
80,000 in 10 ft. (3 m) 110,000 (49,895) in 12 ft. (3 m) 100,000 (45,359) in 12 ft. (4.8) 110,000 (49,895) in 12 ft. (3 m) 110,000 (49,895) in 10 ft. (3 m) 110,000 (49,895) in 10 ft. (3 m) 60,000 (27,215) in 10 ft. (3 m) closed 100,000 (45,359) in 10 ft. (3 m) closed 70,000 (31,751) in 16 ft. (4.8 m) 100,000 (45,359) in 10 ft. (3 m) 50,000 (22,680) in 10 ft. (3 m) closed 60,000 (27,215) in 10 ft. (3 m) closed 70,000 (31,751) in 10 ft. (3 m) closed 60,000 (27,215) in 10 ft. (3 m) closed 70,000 (31,751) in 10 ft. (3 m) closed 80,000 (36,287) in 10 ft. (3 m) closed 90,000 (40,823) in 10 ft. (3 m) closed 100,000 (45,359) in 10 ft. (3 m) closed 50,000 (22,680) in 10 ft. (3 m)
26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 24x8.5 (7.32x2.59) 38 to 62.8x8.5 (11.5 to 19.14x2.59) 38 to 57.8x8.5 (11.58 to 17.61x2.59) 29x8.5 (8.84x2.59) 23.5x8.5 (7.16x2.59) 29x8.5 (8.84x2.59) 29x50.33 (8.8x15.34) 29x50.34 (8.8x15.34) 28.58 to 49.92x8.5 (8.71 to 15.21x2.59) 28.58 to 49.92x8.5 (8.71 to 15.21x2.59) 24.08 to 49.42x8.5 (7.33 to 15.06x2.59) 24.08 to 49.42x8.5 (7.33 to 15.06x2.59) 27.08 to 46.42x8.5 (8.25 to 14.14x2.59) 39 x 8.5 ft. (11.9x2.59)
Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 22, 2020 • Page 45
see CHART page 46
MFG/ MODEL
WEIGHT CAP. LBS. (KG)
SIDUMPR SDR240-49 SDR240-73 SDR342.49 SDR348-4986 SDR449-4971 SDR550-6049 SDR231.49AG SDR235.49AG
MFG/ MODEL
TOWMASTER T-9P T-9P T-9P T-9P T-10P T-10P T-10P T-10P T-12P T-12P T-12P T-12P TC-9D TC-9D TC-9D TC-10D TC-10D TC-10D TC-12D TC-12D TC-12D TC-12D TC-14D TC-14D TC-14D T-9D T-9D T-9D T-9D T-10D T-10D T-10D T-10D T-12D T-12D T-12D T-12D T-14D T-14D T-14D T-16D T-16D T-16D T-18D T-18D T-18D T-20D T-20D T-20D T-5HD T-5HD T-9HD T-9HD T-10HD T-10HD T-10HD T-12HD T-12HD T-12HD
EQUIP. WEIGHT EMPTY LBS. (KG)
80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 90,000 (40,823) 96,000 (43,545) 105,500 (47,854) 50,000 (22,680) 56,000 (25,401)
DECK SIZE FT. (M)
15,500 (7,031) 15,500 (7,031) 17,500 (7,938) 19,500 (8,845) 21,500 (9,752) 23,000 (10,433) 14,000 (6,350) 14,750 (6,690)
WEIGHT CAP. LBS. (KG)
EQUIP. WEIGHT EMPTY LBS. (KG)
6,800 (3,084) 6,800 (3,084) 6,800 (3,084) 6,800 (3,084) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 7,400 (3,356) 7,400 (3,356) 7,400 (3,356) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 6,800 (3,084) 6,800 (3,084) 6,800 (3,084) 6,800 (3,084) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 16,000 (7,250) 16,000 (7,250) 18,000 (8,100) 18,000 (8,100) 18,000 (8,100) 20,000 (9,072) 20,000 (9,072) 20,000 (9,072) 5,000 (2,260) 5,000 (2,260) 7,400 (3,356) 7,400 (3,356) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400)
3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 3,400 (1,542) 3,400 (1,542) 3,400 (1,542) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 4,200 (1,905) 4,200 (1,905) 4,200 (1,905) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 1,600 (725) 1,600 (725) 2,600 (1,179) 2,600 (1,179) 4,300 (1,950) 4,300 (1,950) 4,300 (1,950) 4,300 (1,950) 4,300 (1,950) 4,300 (1,950)
SUSPENSION TYPE Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring
36 (11) Tub 36 (11) Tub 36 (11) Tub 36/38 (11/12) Tub 38/40 (12/12.2)Tub 38/40 (12/12.2)Tub 28 (8.5) Tub 24 (7.3) Tub
DECK SIZE FT. (M)
NO. OF AXLES
SPEED RATING MPH (KPH)
6.4x14 (1.9x4.2) 6.4x16 (1.9x4.8) 6.4x18 (1.9x5.4) 6.4x20 (1.9x6) 6.4x14 (1.9x4.2) 6.4x16 (1.9x4.8) 6.4x18 (1.9x5.4) 6.4x20 (1.9x6) 6.4x14 (1.9x4.2) 6.4x16 (1.9x4.8) 6.4x18 (1.9x5.4) 6.4x20 (1.9x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 7x16 (2x4.8) 7x18 (2x5.4) 7x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 5x8 (1.5x2.4) 5x10 (1.5x3) 6.8x10 (2x3) 6.8x12 (2x3.6) 6.8x12 (2x3.6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x12 (2x3.6) 6.8x14 (2x4.2) 6.8x16 (2x4.8)
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2
55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88)
Page 46 • November 22, 2020 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide
CHART from page 45
MFG/ MODEL
WEIGHT CAP. LBS. (KG)
TOWMASTER CONT. T-14HD T-14HD T-14HD T-14HD T-3DT T-5DT T-5DT T-9DT T-9DT T-9DT T-10DT T-10DT T-10DT T-12DT T-12DT T-12DT T-14DT T-14DT T-16DT T-16DT T-12T T-14T T-16T T-20T T-24T T-30T T-40T T-50T T-24TA T-40TA T-50TA TC-9 TC-9 TC-9 TC-9 TC-10 TC-10 TC-10 TC-10 TC-12 TC-12 TC-12 TC-12 TC-14 TC-14 TC-16 TC-18-3 TC-20 TC-24 T-20 T-20LP T-24 T-24LP T-30 T-40 T-40LP T-50 T-50LP T-50RG T-70RG T-70DTG T-100DTG T-110DTG T-120DTG T-80J T-70HT T-70HT T-70HT T-70HT T-80HT T-80HT T-80HT T-80HT T-110HT T-110HT T-110HT T-110HT
14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 3,000 (1,360) 5,000 (2,260) 5,000 (2,260) 6,100 (2,767) 6,100 (2,767) 6,100 (2,767) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 16,000 (7,250) 12,000 (5,400) 14,000 (6,350) 16,000 (7,250) 17,300 (7,847) 24,000 (10,880) 30,000 (13,608) 40,000 (18,100) 50,000 (22,600) 24,000 (10,880) 40,000 (18,100) 50,000 (22,600) 5,400 (2,449) 5,400 (2,449) 5,400 (2,449) 5,400 (2,449) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 18,000 (8,100) 19,000 (8,618) 24,000 (10,880) 19,000 (8,618) 19,000 (8,618) 24,000 (10,880) 24,000 (10,880) 30,000 (13,600) 18,000 (8,100) 40,000 (18,100) 50,000 (22,600) 50,000 (22,600) 50,000 (22,600) 70,000 (31,750) 70,000 (31,750) 100,000 (45,350) 110,000 (49,900) 120,000 (54,400) 80,000 (36,287) 70,000 (31,750) 70,000 (31,750) 70,000 (31,750) 70,000 (31,750) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 110,000 (49,900) 110,000 (49,900) 110,000 (49,900) 110,000 (49,900)
EQUIP. WEIGHT EMPTY LBS. (KG) 5,000 (2,268) 5,000 (2,268) 5,000 (2,268) 5,000 (2,268) 1,100 (500) 2,000 (907) 2,000 (907) 3,800 (1,723) 3,800 (1,723) 3,800 (1,723) 3,800 (1,723) 3,800 (1,723) 3,800 (1,723) 3,900 (1,769) 3,900 (1,769) 3,900 (1,769) 4,400 (1,995) 4,400 (1,995) 4,500 (2,041) 4,500 (2,041) 5,560 (2,521) 5,560 (2,521) 6,460 (2,930) 8,600 (3,900) 8,600 (3,900) 9,800 (4,445) 10,500 (4,763) 12,000 (5,443) 10,610 (4,812) 12,100 (5,488) 12,600 (5,715) 4,590 (2,082) 4,590 (2,082) 4,590 (2,082) 4,590 (2,082) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 6,400 (2,903) 6,400 (2,903) 5,900 (2,676) 6,200 (2,812) 6,700 (3,039) 6,900 (3,130) 6,900 (3,130) 6,900 (3,130) 6,900 (3,130) 6,900 (3,130) 8,300 (3,765) 8,800 (3,992) 8,600 (3,901) 10,700 (4,853) 10,600 (4,808) 11,300 (5,125) 12,600 (5,715) 15,200 (6,895) 18,800 (8,528) 19,100 (8,664) 20,000 (9,072) 7,500 (3,402) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 22,800 (10,342) 22,800 (10,342) 22,800 (10,342) 22,800 (10,342)
SUSPENSION TYPE Spring Spring Spring Spring Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Slipper Spring Slipper Spring Slipper Spring Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell
DECK SIZE FT. (M)
NO. OF AXLES
SPEED RATING MPH (KPH)
6.8x12 (2x3.6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 4.5x10 (1.3x3) 6.4x12 (1.9x3.6) 6.4x14 (1.9x4.2) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x26 (2.5x7.9) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x18 (2.4x5.4) 8x20 (2.4x6) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x18 (2.4x5.4) 8x20 (2.4x6) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x18 (2.4x5.4) 8x20 (2.4x6) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x16 (2.4x4.8) 8x16 (2.4x4.8) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x22 (2.5x6.7) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x22 (2.5x6.7) 8.5x25.6 (2.5x7.8) 8.5x26.6 (2.5x8.1) 8.5x27.6 (2.5x8.4) 8.5x29.6 (2.5x9.0) 8.5x25.6 (2.5x7.8) 8.5x26.6 (2.5x8.1) 8.5x27.6 (2.5x8.4) 8.5x29.6 (2.5x9.0) 8.5x25.6 (2.5x7.8) 8.5x26.6 (2.5x8.1) 8.5x27.6 (2.5x8.4) 8.5x29.6 (2.5x9.0)
2 2 2 2 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 2 2 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 2 2 2 2 2 2 2 2 2 3 3 2 2 2 3 3 3 2 2 2 2 2 2 2 2 2 3 3 3 3
55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88)
Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 22, 2020 • Page 47
Page 48 • November 22, 2020 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide
$1,300 Down PPaayment
C I . } B d CI VYI = B
NO interesst,t, NO ppaayments uuntil May 2021
* › ĂŁ Ăś Ăˆ ç Ă˜ C Ăˆ ĘŁ . } B d Ă‚ › › • › • (盟 ‚• ]Â›Ă˜ĂłÂŻÂ?› dĂ˜Â‚ÂŻÂźÂ›Ă˜ ‚• ゚› ‚•ó‚Âり› ĂˆÂ¨ Â‚ÂŠÂŠĂ˜Â›ĂœĂœÂŻĂłÂ› ¨ ¯Â‚ÂÂ?¯ÂŠ ‚• ՂÜà ›Âã ĂŁÂ›Ă˜Ă ĂœĘ’ dÂĂ§Ă‚Â•Â›Ă˜ Ă˜Â›Â›Âš ĂˆÂ¨Â¨Â›Ă˜Ăœ ¨ç›ŸĘ? ¨Ÿç¯• ‚• ĂœÂ›Ă˜ĂłÂŻÂ?› ĂœĂˆÂźĂ§ĂŁÂŻĂˆĂ‚Ăœ ã‚ã Õçã ĂśĂˆĂ§ ÂŻĂ‚ ĂŁĂˆĂŁÂ‚Âź Â?ĂˆĂ‚ĂŁĂ˜ĂˆÂź ĂˆÂ¨ ĂśĂˆĂ§Ă˜ ›×ç¯Õà ›Âã çÕã¯à › ‚• Â¸ĂˆÂŽĂœÂŻĂŁÂ› Ă•Â›Ă˜Â¨ĂˆĂ˜Ă Â‚Ă‚Â?›ʒ
ÂŠĂˆĘ’dd ÂĂ§Ă‚Â•Â›Ă˜ Ă˜Â›Â›ÂšĘ’Â?ĂˆĂ Ę˜Ę˜Â?Â?›Šɡɡɸɜ
ɞɟɟʒɝɚɝʒɽɟɟɽ ˚ɡĘ?ɚɜɜ Â•ĂˆĂ´Ă‚ ՂÜà ›Âã ÂŽÂ‚ĂœÂ›Â• ĂˆĂ‚ ĂˆĂ§Ă˜ Â¸ĂˆÂŽĂœÂŻĂŁÂ› Ă˜Â›Â‚Â•ĂśĂśĘ?Ę? ÉźÉżÉśĘŁÂŠÂ‚ÂźÂźĂˆĂ‚ BçŸã¯ʣdd‚ ‚š ddĂ˜Ă˜Â‚ÂŻÂźÂ›Ă˜ ›×ç¯Õ՛• Ă´ÂŻĂŁÂ ĂœĂˆÂźÂ‚Ă˜ ÂŽÂ‚ĂŁĂŁÂ›Ă˜Ăś Ă Â‚ÂŻĂ‚ĂŁÂ‚ÂŻĂ‚Â›Ă˜ ‚• Ղã›Â㛕 ÉˇÉśÉśĘŁÂŠÂ‚ÂźÂźĂˆĂ‚Ę? ɸʣ¯Âʣɡ ( ĂœĂśĂœĂŁÂ›Ă Ę’ (¯Â‚ÂÂ?¯ÂŠ ĂœĂ§ÂŽÂ¸Â›Â?ĂŁ ĂŁĂˆ Â‚Ă•Ă•Ă˜ĂˆĂłÂ‚ÂźĘ’
Offer vallid until til December 31, 2020.
scan here with your smartphone camera
SmithCo Side Dump Trailers Offer Versatile SX Series, CP30 SmithCo Side Dump Trailers’ SX Series and CP30 trailers offer enhanced stability, easier unloading and faster cycle times. “No company has engineered or produced more side dump trailers than SmithCo,� said Scott Lovell, president and CEO of SmithCo. “Our job is to provide our customers with the exact trailer they need to solve their hauling issues and help them achieve maximum profits.� The SX Series and the CP do just that, according to the company.
SmithCo’s SX Series encompasses a number of different trailer models that have varying numbers of axles.
There’s Nothing an SX Series Won’t Haul Built to handle even the most adverse payloads, the SX Series is considered the workhorse of SmithCo’s products. Years of experience and innovation have gone into developing the SX Series, and the result is a highly customizable trailer that’s built to last, according to the manufacturer. Each trailer dump body is constructed of AR400 steel, making it tough and durable. And details like radiused corners and the lack of center divider means that SX trailers clean out better than other tub designs. Customers can choose axle configurations, from a single axle up to six. The most popular design is the tri-axle, with many different axle spacings available. CP30 for Off-Road Construction and Agriculture The CP30 Construction Pup is another versatile offering from SmithCo. These trailers are designed to be pulled with off-road construction power units or agricultural tractors. Available in 30 and 40 ton capacities with a variety of construction grade or flotation type tires, these trailers can dump on either side and stockpile or windrow for maximum versatility when out on the job. The CP Series allows haulers to top load materials that a scraper cannot handle as well as haul ag products to the field. For more information, visit sidedump.com. 
SmithCo’s Construction Pup is designed for both off-road construction and agriculture; it can be pulled with off-road construction power units or tractors.
Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 22, 2020 • Page 49
What can you haul in a side dump trailer? Nearly anything.
Superior Stability
Faster Cycle Times
Easier Unloading
With construction grade tires and an ability to haul dirt, rock, millings, riprap and other materials, our trailers help solve the everyday challenges of the construction industry. When we build trailers, we build solutions. 800-779-8099 • sidedump.com
Page 50 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Colorado’s Frazee Construction Leans on Hitachi Equip. By Caroline Schweitzer HITACHI
Growing up, Jeremy Frazee knew that life spent working in a cubicle wasn’t going to work for him. He spent his high school summers working as a laborer for the company his grandfather started, Frazee Construction, based in Colorado Springs, Colo., where he realized his passion for the industry. Today, the company has been passed down to its third generation, with Jeremy Frazee as co-owner, CEO and director of field operations. “Working outside in such a beautiful place like Colorado…it’s just hard to beat,” Frazee said. “I wouldn’t give it up for anything. The cubicle life just isn’t for me.” That seems to be the way of thinking for many in the Frazee family — Jeremy’s cousin Bobby Frazee is co-owner of the company. “Bobby and I both started as laborers in the field for our fathers when they were running the business, and now we’re full owners,” Frazee said. “It’s kind of a rare thing. We’ve got a lot of pride in our family name in this town.” Pride in the Name That pride in their family name revolves around the integrity in which the business operates, and
the reputation for quality work. To get their jobs done right, they trust one brand name when it comes to excavators: Hitachi. “We started running Hitachi excavators about four years ago,” Frazee said. “Now, we have eight of them. We continue to choose Hitachi because we’ve had great luck with the equipment.” Their fleet ranges in size, with six ZX470LC-6 excavators that are their production workhorses, down to a ZX245USLC-6 and a ZX135US-6 for excavation and compaction in tight spaces. This versatility is important for the wide range of utilities that Frazee typically installs. The smoothness of the Hitachi machines is another big factor for why the company is growing its Hitachi fleet. “I think the smoothness and overall operation of the machine is huge,” Frazee said. “Operator comfort and Hitachi machines have always been great. And they’re quiet, which is another bonus.” Frazee noted that there’s just something about the excitement of having a new machine on a jobsite that energizes the team. “These guys will fight over who’s going to run the new 470,” Frazee smiled. “And I’d be lying if I said I didn’t like to run the equipment myself, especially new machines. That is the kid in me.
With the growth that Colorado Springs has seen as a city in recent years, more and more projects Frazee has tackled have been utilities installations.
Even though I’m not digging all day every day, I’ve always loved running an excavator.” All-Day Productivity At a recent residential jobsite in Colorado Springs, Frazee Construction laid more than 500 feet of new water lines. When jobsites have big expectations and fast turnarounds, productivity is paramount. “Productivity is everything,” Frazee said. “When one of our machines goes down, it’s a lot of guys standing around and it’s a lot of money. With our Hitachis, that rarely happens. We get great support from our dealer 4Rivers to keep us up and running.” You can’t have productivity without durability. And the Colorado terrain demands machines that can conquer the variety of rock and soil conditions over time. “Durability of the machine is huge, especially in Colorado where we’re dealing with a lot of different soil conditions,” Frazee said. “It has to dig through solid rock, granite, sandstone, clay and even frost in the winter. We’ve found that the Hitachis can handle the terrain the best.” And when maintenance is needed, Frazee noted that parts availability is critical. “We get mechanics and parts extremely fast,” Frazee said.
Frazee Construction’s fleet ranges in size, with six ZX470LC-6 excavators that are their production workhorses, down to a ZX245USLC-6 and a ZX135US-6 for excavation and compaction in tight spaces.
“Some of it can even be done remotely. Having trust in our dealer to support us in that way is huge. We keep that relationship and continue to choose Hitachi because if it ain’t broke, don’t fix it.” Accuracy With Utilities With the growth that Colorado Springs has seen as a city in recent years, more and more projects Frazee has tackled have been utilities installations. While productivity is key for installing utilities, so is attention to detail. Water lines, in particular, require high attention to detail and accuracy. “Everything is inspected, which means we have to be even more precise,” Frazee said. “So, it takes another layer of quality control, more training and more sophisticated equipment.” Municipalities have stringent guidelines and utilize video equipment to test the pipes before contractors get the green light. Because of this, the training and experience of each operator and crew member is critical when it comes to quality. It’s also very important for the crew’s safety. “There’s a lot of training involved in the way we install utilities because it’s large equipment very close to people on the ground,” Frazee said. “You’ve got a 120,000-lb. excavator that’s digging literally a few feet from people. There’s a mutual trust and respect, and continuous training to make sure our team is always safe.”
In It for the Long Run Frazee Construction has built a culture of longevity, not only with their machines, but also with their employees. “My grandfather started this company back in 1946, and as it has been passed down, we’ve had employees who have been here for decades,” Frazee said. “I think the one thing that makes our company unique is almost all of our employees, foreman, superintendents and project managers all started as laborers and worked their way up. It really is a family culture here.” Frazee is hopeful that the company continues with a fourth generation of the Frazee family at the reigns. “So far we’ve been able to build upon the company,” Frazee said. “Hopefully my kids and Bobby’s kids can build on what we hand over to them.” If the kids decide they’re interested, they’re going to have to work their way up like everyone else. “You don’t want the boss’ kid to come out of school and just all of a sudden be in charge of people. Our dads’ idea was to put in the work, so that’s what they can do, too,” Frazee smiled. Frazee Construction Co. is serviced by 4Rivers Equipment, Colorado Springs, Colorado. (This story was reprinted with permission from Hitachi’s BREAKOUT magazine, Fall 2020 issue.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 51
HONNEN EQUIPMENT CO.
DOGGETT HEAVY MACHINERY SERVICES
www.honnen.com
www.doggett.com
Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441 St. George, UT 435-652-8003
Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915
9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001 Victoria, TX 361-570-6666
Alexandria, LA 318-442-0455
Lufkin, TX 936-634-8801
Baton Rouge, LA 225-291-3750
Monroe, LA 318-343-8787
Broussard, LA 337-837-9481
Shreveport, LA 318-631-3090
Covington, LA 985-893-3005
St. Rose, LA 504-466-5577
Lake Charles, LA 337-430-3045
Tyler, TX 903-592-8900
Longview, TX 903-758-3326
Page 52 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Officials Hoping New 63,000-Sq.-Ft. Rec Center Will Be Ready By 2022
Kirby-Smith Machinery www.kirby-smith.com 6715 W. Reno Ave Oklahoma City, OK 73127 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 800-375-3733
Amarillo, TX 800-283-1247 Lubbock, TX 866-289-6087 Odessa, TX 877-794-1800
Abilene, TX 877-577-5729
Tri-West Tractor, Inc. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200
The 63,000-sq.-ft. facility will have areas for basketball, volleyball and indoor soccer, strength and conditioning, a climbing wall and locker rooms, among other amenities. TEXAS from page 1
recreation center, we’re supporting our students’ health and well-being, which are essential to helping them succeed not only in the classroom, but also in life.” The 63,000-sq.-ft. facility will have areas for basketball, volleyball and indoor soccer, strength and conditioning, a climbing wall and locker rooms, among other amenities. A&M administrators said the facility is needed because of the university’s increasing enrollment. A study by the National Intramural Recreational Sports Association shows a university of A&M’s size should have at least 587,000 square feet of indoor recreational facilities. A&M has about 415,000 square feet. Since the Student Recreation Center was opened in 1995, the university’s student body has grown more than 60 percent, the university said in a release announcing the project. During the same time, recreational facilities on campus have expanded by only 25 percent. A&M administrators noted how all recreational facilities are on the west side of A&M’s campus, which is more than a 10-minute walk from many academic and housing buildings. “The South Campus Recreation
Center is a critical project to the university’s commitment to provide students, faculty and staff with the best opportunities to support and nurture their health and well-being,” said Rick Hall, A&M’s director of recreational sports. “The Department of Recreational Sports provides high-quality, inclusive experiences and facilities. Multiple
assessments have shown that participants in recreational activities have higher persistence rates and graduation rates than those who do not engage in recreation. A student’s overall health and well-being, coupled with academic success, will prepare graduates for successful careers within the global economy.”
Ditch Witch of East Texas www.witchequipment.net 7717 Highway 69 Tyler, TX 75706 903-592-6226
Ditch Witch of Arizona www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351 Tucson, AZ 520-579-0261
Texas A&M University’s Board of Regents recently approved the construction of a $35 million recreation center on the south side of A&M’s main campus.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 53
Waukesha-Pearce Industries, Inc.
Garton Tractor Inc.
Power MotiveCorporation
www.wpi.com
www.gartontractor.com
www.powermotivecorp.com
12320 South Main St. Houston, TX 77035 713-551-0506 Tomball, TX 281-351-9016 Corpus Christi, TX 361-884-8275 San Antonio, TX 210-648-4444
Beaumont, TX 409-721-5305 Edinburg, TX 956-386-0107 Austin, TX 512-251-0013 Buffalo, TX 903-322-7150
4088 Russell Road Fairfield, CA 94534 707-425-9545 Santa Rosa, CA 707-586-1790 Ukiah, CA 95482 707-468-5880
DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900
Milliken 970-587-1188
Colorado Springs 719-576-5541
Cheyenne 307-634-5149
Grand Junction 970-241-1550
Durango 970-259-0455
Nueces Power Equipment www.nuecespower.com 4697 FM 1516 N Converse, TX 78109 210-310-0066 7667 N Sam Houston Pkwy Humble, TX 77396 713-247-0066
Page 54 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact your local dealer: ARNOLD MACHINERY CO. www.arnoldmachinery.com
Salt Lake City, UT
Sparks, NV
801-972-4000
775-356-1511
Idaho Falls, ID
Las Vegas, NV
208-523-0822
702-642-9000
Meridian, ID
Phoenix, AZ
208-887-6000
602-414-1900
Twin Falls, ID
Tucson, AZ
208-733-1715
520-294-7677
SIERRA MACHINERY, INC. www.sierraelpaso.com
El Paso, TX
Artesia, NM
915-772-0613
575-746-6592
ROMCO EQUIPMENT CO. www.romco.com
Austin
Ft. Worth
Round Rock, TX 512-388-2529 877-851-1026
Ft. Worth, TX 817-626-2288 866-966-4602
Buffalo
Houston
Buffalo, TX 903-322-5602
Houston, TX 713-937-3005 800-865-6998
Carmine Carmine, TX 979-278-3570
Corpus Christi
Longview Longview, TX 903-758-5576
Corpus Christi, TX 361-881-4891
Rio Grande Valley
Dallas
Mercedes, TX 956-565-0100
Carrollton, TX 214-819-4100 800-227-6626
San Antonio San Antonio, TX 210-648-4600 800-966-4601
PACWEST MACHINERY www.PacWestMachinery.com
Spokane Valley, WA 509-534-5933
Portland, OR
Eugene, OR 541-302-3762
Kent, WA 206-762-5933
503-252-5933
VOLVO CONSTRUCTION EQUIPMENT & SERVICES www.vcesvolvo.com
Bakersfield, CA 661-387-6090
Corona, CA 951-277-7620
Fresno, CA 559-834-4420
Sacramento, CA 916-504-2300
Lakeside, CA 619-441-3690
San Leandro, CA 510-357-9131
Turlock, CA 209-410-6710
Pages 55-57
Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.
Boss Snowplow Introduces New Back Drag Plow to Market By Ruksana Hussain CEG CORRESPONDENT
44,000 sq. ft. of additional manufacturing space to the existing facility, which will include a new paint line and improvements to its research and development facility to increase production capacity and support future growth. It is slated to be completed by spring of 2021 and will create about 24 new jobs in the area. The company itself has evolved over the years in response to the times. On the manufacturing side, automation has changed the industry from its earliest days. Robotic welding, laser and plasma cutting tables,
Boss Snowplow photo
The Boss product line features plows for pickup trucks, tractors, loaders, UTVs and ATVs.
Leaders in the competitive snow and ice management business, Iron Mountain, Mich.-based Boss Snowplow has a few new products available to customers this year. The company will introduce a new back drag plow it is bringing to market that goes on the back end of a pickup and is “dragged” behind the truck. When combined with a plow on the front of the vehicle, contractors report a 30 to 50 percent improvement in productivity, according to Boss. In 2019, Boss showcased a booth full of new products at The Work Truck Show, North America’s largest work truck event. Highlighted were the Forge 2.0 long bed designed to fit long bed trucks; DXT D-Force dual trip plow with the added option of D-Force to maintain consistent hydraulic down force enhancing back dragging performance; Exact Path 1.5 drop spreader for ATVs and mid-size UTVs; and SK-R6 compact box plow for tractors, skid steers and other maintenance vehicles. The Boss Snowrator is designed to make quick work of snow-and ice-covered sidewalks and provides a maneuverable, multitasking, labor-saving solution to address the challenge of managing sidewalks, according to the manufacturer. It reduces the need for shovelers, maximizing productivity and efficiency — whether in metro, commercial or residential environments — where clean and clear walking surfaces are always the top priority. Snowrator quickly deploys to plow and de-ice surface areas, effectively reducing the need for shovelers. It allows the operator to brine, spread and plow at the same time to maximize on-the-job productivity and profitability. The most popular piece of equipment though remains the V-plow for a ¾-ton pickup truck. In fact, Boss was the first brand to have a V-plow and its first product was a Vplow for pickup trucks. A revolutionary idea back when it was first unveiled, the V-plow
see BOSS page 56
Boss Snowplow photo
The Exact Path 1.5 drop spreader is made for ATVs and mid-size UTVs. Boss Snowplow photo
The most popular piece of equipment though remains the V-plow for a ¾-ton pickup truck. In fact, Boss was the first brand to have a V-plow and its first product was a V-plow for pickup trucks.
has made truck plows much more productive when compared to the traditional straight-blade plows. Today well over 50 percent of all plows sold by snow and ice manufacturers are V-plows. The Boss product line features plows for pickup trucks, tractors, loaders, UTVs and ATVs; salt and sand spreaders for the same vehicles; Snowrator sidewalk vehicles, which plow, salt and brine at the same time; and hand tools and accessories like shovels
and walk-behind spreaders. The company, founded in 1985 by Warren Brule, has several hundred thousand square feet of manufacturing facilities in its ISO9001:2015 registered facility in Iron Mountain, housing steel fabricators with lasers, presses, machining, welding and painting processes. There have been several expansions of the facilities over the years, including one that is in progress right now. The project will add approximately
Boss Snowplow photo
Boss offers a combination of factory and remote training for its regional and international dealer network annually.
Page 56 • November 22, 2020 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
Technology, Testing Aids Boss With Reducing Design Time
Boss Snowplow photo
Boss Snowplow photo
Boss designed its box plow for tractors, skid steers and other maintenance vehicles.
Boss Snowplow will introduce a new back drag plow it is bringing to market that goes on the back end of a pickup and is “dragged” behind the truck.
BOSS from page 55
etc. have decreased the amount of time required to build plows dramatically and have improved quality. On the engineering front, computer-aided design has allowed engineers to design and “test” product concepts long before actually fabricating steel. This has decreased design times, improved durability and reliability and improved costs for manufacturing. As a result, the product line also has transformed. By staying connected and listening to snow and ice contractors and dealers, Boss has deepened and widened its product offerings into multiple cat-
egories. The goal is to provide contractors with solutions to their snow and ice business needs regardless of what vehicles they are using and what kind of contracts they have to do. To cater to that need, the company has developed its workforce, adding to its talent across different functions, from manufacturing to sales and marketing. Providing a safe working environment and the best equipment for its growing team to build the best products has always been a priority at Boss, which has more than 300 employees today. Yet, among the many challenges
experienced, labor, or the lack thereof, is one of the biggest issues in the industry. Customers are facing difficulties finding seasonal labor and dealers also are finding it harder to staff their shops. The other constant challenge for the industry is snowfall. No two winters are alike and long-term weather forecasts/projections are not that accurate. This impacts every element of the snow and ice market, right from the manufacturers to the dealers down to the customer/contractors. Boss does its part in offering a combination of factory and remote training for its regional and inter-
national dealer network annually. For customers, seminars are offered if requested, typically when larger fleet groups have annual meetings. These are usually on product-related topics or overviews. When it comes to parts and product support, Boss offers a twoyear warranty on most products. Parts are readily available, and the national dealer network is encouraged to stock up on parts so customers can get what they need, when they need it. Additionally, Boss offer parts directly to customers on its e-commerce platform, ShopBoss.com.
As for the future, Boss will continue to have its pulse on customer feedback and industry trends, providing the best solutions possible. The company’s reputation is built on being available to customers at all times and standing behind its products. To this day, when you call the factory with an issue or a question, you talk to a human being and sometimes it’s the person who helped design the product. That close connection between product and the product user gives Boss an edge in the marketplace that the company plans to continue building upon for generations. CEG
Boss Snowplow photo
Boss Snowplow’s goal is to provide contractors with solutions to their snow and ice business needs regardless of what vehicles they are using and what kind of contracts they have to do.
Boss Snowplow photo Boss Snowplow photo
The Boss Snowrator is designed to make quick work of snow-and ice-covered sidewalks.
By staying connected and listening to snow and ice contractors and dealers, Boss has deepened and widened its product offerings into multiple categories.
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • November 22, 2020 • Page 57
Page 58 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. NOVEMBER/DECEMBER 2020 CRANE SAFETY COURSES November 23 – November 25, 2020 Aerial Work Platform Train The Trainer, Houston, TX November 30 – December 4, 2020 Mobile Crane Train The Trainer, Houston, TX December 1 – December 4, 2020 Overhead Crane Inspector Training, Cincinnati, OH December 2 – December 4, 2020 Qualified Rigger Level 2 Training, Orlando, FL December 7 – December 11, 2020 Mobile Crane Operator Training, Houston, TX December 7 – December 11, 2020 Overhead Hoist Maintenance Training, Cincinnati, OH December 8 – December 11, 2020 Mobile Crane Inspector Training, Orlando, FL December 15 – December 18, 2020 Overhead Crane Train The Trainer, Houston, TX December 21 – December 23, 2020 Forklift Operator Train The Trainer, Houston, TX December 21 – December 23, 2020 Forklift Operator Train The Trainer, Houston, TX December 21 – December 23, 2020 Boom Truck Operator Train The Trainer, Cincinnati, OH December 21 – December 23, 2020 Rigging Inspector Training, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com
AMERICAN CONCRETE PAVEMENT ASSOCIATON (ACPA) ACPA 57th Annual Meeting - GOING VIRTUAL Dates: December 1 – 3, 2020 Times: December 1 - 11:00am - 4pm CT December 2 - 11:00am - 4pm CT December 3 - 1:00pm - 4:45pm CT This program is designed to provide value to ACPA members’ businesses, to create an enjoyable and content-rich program, and to celebrate and recognize ACPA members and other guests who are "Essential Every Day!". What can I expect at the Virtual Annual Meeting? • A World Renown Keynote Speaker • Watch live and recorded sessions from top industry speakers • Lively and engaging market forums with panelists • Games and prizes throughout the event and during our social networking hour • A fun celebration with award level reveal at our Excellence in Concrete Pavement Awards ceremony • Opportunities to network and chat with attendees • Learn about exciting new products and services within the exhibitor hall The on-demand content will be hosted for 30 days following the event. To register for this event, please visit https://acpa57.vfairs.com/. ASSOCIATED GENERAL CONTRACTORS OF AMERICA (AGC) Virtual Crane Management in Construction Safety Training Dates: December 17 – 18, 2020 Times: 8:00am - 5:00pm AGC of America, supported by a Susan Harwood Federal Training Grant, developed the Crane Management in Construction Safety Training. According to the Bureau of Labor Statistics (BLS), from 2011 to 2015, the Census of Fatal Occupational Injuries (CFOI) reported 220 total cranerelated deaths, an average of 44 per year over this 5-year period with 42% of the fatal work injuries taking place in the private construction industry. The data also shows that specialty contractors and heavy and civil engineering construction accounted for the most fatalities involving cranes in private construction. AGC of America is pleased to offer this FREE, one-day training program based on OSHA standards and best practices to answer the need for quality training within the industry. The course will be delivered via Zoom Meetings and continuing educations credits will be offered.
are closely monitoring COVID-19 and its potential impact on plans to host National Pavement Expo and Conference in Nashville. Should the in-person event not be able to take place, we are looking at a virtual exhibit hall and conference experience to meet the needs of all industry stakeholders. It is our promise to provide updated details as soon as possible.* National Pavement Expo (NPE) brings vendors and contractors together who make their living from asphalt and concrete paving, sealcoating, striping, sweeping, crack repair, pavement repair, and snow removal to network with other paving professionals and attend industry workshops. In addition to hosting 200+ leading brands from the paving and pavement maintenance industry, NPE delivers more than 50 conference sessions over a 4-day span. Whether you want to increase industry knowledge, sharpen your skills, improve efficiency, or learn about the latest and greatest products, you can do it all here! MINESOTA NURSERY & LANSCAPE ASSOCIATION (MNLA) Workshops and education sessions will cover a variety of & MINNESOTA TURF AND GROUNDS FOUNDATION (MTGF) topics from leaders in the Paving Industry highlighting innoNorthern Green Virtual 2021 vative practices, critical issues, and more! Dates: January 11 – 14, 2021 For more information and to register for this event, please Description: The Northern Green Expo is the largest trade visit https://www.nationalpavementexpo.com/attendee/. show and educational conference in the north central region dedicated exclusively to green industry professionals. Even NATIONAL UTILITY CONTRACTORS ASSOCIATION (NUCA) in an industry where every year is different, 2020 has been 2021 NUCA Annual Convention & Exhibit exceptional. Despite our hope to hold an in-person event in Dates: February 4 – 6, 2021 January, Northern Green is going online. Using a dedicated virtual event platform, Northern Green will Location: Naples Grande Beach Resort 475 Seagate Dr., Naples, FL include a keynote address, educational sessions, coffee chats, exhibits, awards presentations, networking and more! NUCA is headed back to the Naples Grand Beach resort for To learn more about how Northern Green Virtual benefits our 2021 annual meeting & convention. We are excited to you, check out this post on their blog: https://northern- revisit an amazing property located on the beautiful beaches of Florida for another terrific convention! green.org/dontmissngvirtual. You’ll also receive access to customized exhibitor landing It’s time to get out of the office and talk shop with your fellow pages and on-demand education sessions will be available NUCA contractors from across the country who, as compapost-event until September 1, 2021. ny principals, face the same problems you do every day. To register for this event, please visit Problem solving with fellow NUCA members can energize https://northerngreen.org/. you so you can step back into the office and tackle your business with a new perspective, galvanize your employNATIONAL PAVEMENT EXPO AND CONFERENCE 2021 ees, and use what you’ve learned to improve your day-toDates: January 20 – 23, 2021 (Conference) day operations. January 20 – 22, 2021 (Exhibit Hall) Early Bird Registration Ends November 30, 2020! Location: Music City Center For more information on the annual NUCA Convention & Nashville, TN Note: *The health, safety, and wellbeing of every attendee, Exhibit, please contact Chris Barrett at chris@nuca.com or exhibitor, speaker, and staff is our number one priority. We phone 703.358.9300.
• A World Renown Keynote Speaker • Watch live and recorded sessions from top industry speakers • Lively and engaging market forums with panelists • Games and prizes throughout the event and during our social networking hour • A fun celebration with award level reveal at our Excellence in Concrete Pavement Awards ceremony • Opportunities to network and chat with attendees • Learn about exciting new products and services within the exhibitor hall This training event will be FREE for members as well as nonmembers. To register for this event, please visit www.agc.org/learn/education-training/events/crane-management-construction-safety-training/.
Events are subject to change, check websites for updates
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195
Keep Up With All the Industry News Subscribe to
Construction Equipment Guide Today! Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 23-24 EB Call 866-294-6103
Toll Free
800/523-2200
Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.
For more information, call Construction Equipment Guide today at
800/523-2200
Curry Supply Broadens Its Presence With Hale Hiring Curry Supply Co. has expanded its regional sales team with the addition of E. Marshall Hale as a regional sales manager. Hale, who resides in Texas, will offer direct support for Curry Supply’s Houston (Deer Park) location, in addition to operating as the main contact for Curry Supply clients located in southern Texas and southern Louisiana areas. “When thinking about adding to our team, it’s important for us to find just the right candidate to properly serve and provide for the needs of our valued customers. Marshall Hale Marshall [Hale] brings with him enthusiasm and experience, and we’re excited for him to get started in our Houston market,” said Jeff Shaw, vice president of sales and marketing at Curry Supply. “I am proud to join the Curry team and be
a part of a fast-paced, customer-first organization,” Hale said. “My last seven years in truck equipment have given me a great deal of experience working with a variety of customers. I love to learn firsthand from the customer and its employees about how they utilize their trucks to ensure we are making upgrades to our product line to further help their business. I look forward to adding the Curry line of products to my portfolio and helping our loyal customers get the equipment they need.” Hale has acted as a staple in the truck equipment industry, specifically focusing his sights on the gulf coast region. For more information, e-mail Hale at mhale@currysupply.com, call 281/4286539 or visit currysupply.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 59
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX270C EXCAVATORS. LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX200LC, EX270LC, EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPION SERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@EQUIPMENT-ANDPARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F PLEASE. EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 ––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR 966F II WHEEL LOADER; LOOKING TO BUY CAT 966F 2 ANY CONDITION, LET ME KNOW. EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS PLEASE QUOTE ME, IF YOU HAVE ANY SURPLUS EQUIPMENT. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR EXCAVATORS – WHEEL LOADERS, GRADERS, ALL MODELS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 ––––––––––––––––––––––––––––––––
WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLARAME EXCAVATORS, ALL MODELS. LOOKING TO BUY USED CONTRACTION WITH WHOLESALE. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU EXCAVATORS, ALL MODELS. LOOKING TO PURCHASE ANY HEAVY EQUIPMENT OR TRUCKS! EMAIL: JDLANDWORXEQ@GMAIL.COM; PHONE: 910-585-1608 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAS AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS. ALSO WE BUY OLD CAT MACHINES. EMAIL: USA@GCESEQUIPMENT.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 988A WHEEL LOADER. I SEEK TO PURCHASE A CAT 988A THAT IS IN WORKING ORDER, WITH GOOD TIRES AND A BUCKET WITH TEETH. EMAIL JIMTHORNTON@STNY.RR.COM OR CALL 607-483-2383. –––––––––––––––––––––––––––––––– WANTED (PA): FORD F250 SUPER DUTY PICKUP TRUCK, WITH 6.4 DIESEL, ANY CONDITION. EMAIL HARLOWCONTRACTING@YAHOO.COM OR CALL 267-738-5984. –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS OF CATERPILLAR CRAWLER LOADERS OR ANY USED CONSTRUCTION EQUIPMENT WITH WHOLE SALE PRICE. EMAIL AMERICAUSEDEQUIPMENT@ GMAIL.COM OR CALL 657-236-7504. –––––––––––––––––––––––––––––––– WANTED (PA); GARWOOD 75B CRANE, ANY CONDITION OR ANY ATTACHMENTS. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): KOEHRING 1066 EXCAVATOR, ANY CONDITION. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE 860 SCRAPER TRANSMISSION, ANY CONDITION. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM ––––––––––––––––––––––––––––––––
WANTED (USA): AKERMAN MOTOR GRADERS, ALL MODELS. PLEASE LET US KNOW IF YOU HAVE ANY MACHINE LIKE THIS (WORKING OR NON). EMAIL: HIEEQUIPMENT@GMAIL.COM; PHONE: 775-235-8837 –––––––––––––––––––––––––––––––– WANTED: 3-AXLE, HEAVY DUTY LOW BOY TRAILER FOR HAULING A CAT 963. EMAIL: BENHOOVER@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CT): CASE 1455B CRAWLER LOADER. EMAIL: HENRYINDUSTRIES@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (IL): NEED MANUALS AND PARTS FOR 1970 BARBER-GREENE TF-30 DRAINAGE TRENCHER (TILING MACHINE). EMAIL: JL.FOMAC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): BATTERY BOX FOR A KOMATSU PC170LC-11. EMAIL: MROBERSON@ LYLEMACHINERY.COM PHONE: 601-624-1124 –––––––––––––––––––––––––––––––– WANTED (FL): MORBARK 4600XL GRINDER. EMAIL: RKCLANDDEVELOPMENT@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): TRANSMISSION FOR EARLY '90S VINTAGE P&H CENTURY RT50. EXISTING IS A SHINKO RCM2509B S/N 0005. PARTS OR SUBSTITUTE TRANNY OR ENGINE/TRANS CONSIDERED. EMAIL: MIKE.SMITH@ CERTIFIEDBOOMREPAIR.COM PHONE: 813-247-1963 –––––––––––––––––––––––––––––––– WANTED (CA): BOBCAT T550 COMPACT TRACK LOADER. EMAIL: CINDYLARK4@MSN.COM –––––––––––––––––––––––––––––––– WANTED (PA): REXWORKS INC MAXIGRIND 425 GRINDER. EMAIL: HENRYINDUSTRIES@YAHOO.COM; PHONE: 814-371-8010 –––––––––––––––––––––––––––––––– WANTED (USA): HYUNDAI ATTACHMENTS - LOOKING FOR A GOOD USED GP BUCKET 4-6 CU.YD. FOR A 1996 HYUNDAI HL770 LOADER. EMAIL: DONNIE@RADIATIONCLEANTECH.COM; PHONE: 601-319-9453 –––––––––––––––––––––––––––––––– WANTED (NY): BANDIT 65 WOOD CHIPPER - USED BRUSH BANDIT 65XP, 75XP, 2002 OR NEWER, 35HP MINIMUM. EMAIL: DSPTECH11@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX400LC-1 EXCAVATOR EMAIL: ILYAS.MTCPK@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED: LOOKING FOR 1000LB FRONT COUNTERWEIGHT FOR CASE 455C CRAWLER LOADER. EMAIL: ROGERPF1@FRONTIERNET.NET; PHONE: 570-639-3058 –––––––––––––––––––––––––––––––– WANTED (US): CAT 311, 312, 315, 320, 325, 330, 336 CL,DL,EL EXCAVATORS UNDER 8000 HOURS. EMAIL: REBUILD@TUSCO.NET; PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: AMPHIBIOUS EXCAVATORS, ALL MAKES AND MODELS, NEW OR USED + ALL MAKE AND MODEL BOOMS AND STICKS LONGER THAN NORMAL + ALL MAKE AND MODEL BROKEN BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US); LOOKING FOR PILOT VALVE 9137384 FOR HITACHI 200LC-3 EXCAVATOR. EMAIL: PJUREKX1@GMAIL.COM; PHONE: 585-492-2449 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR OFFHIGHWAY TRUCKS - I NEED #5 CAT 775D &E ROCK BEDS ONLY. ONLY NEED BEDS. EMAIL: WEBBPAGE1@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS WANTED - SCHWING, PUTZMEISTER, ALLIANCE, CIFA, ETC. ALL MODELS, BRANDS, SIZES. OLD OR NEW! BOOM PUMPS,TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD RETIRED, NO LONGER USED & PARTS PUMPS ALSO PURCHASED. EMAIL INFORMATION A.S.A.P. INSTANT PAYMENT GUARANTEED !! FINDERS FEES PAID!!! EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (PA): I’M LOOKING FOR A PUSH THERMOPLASTIC MACHINE. CAN BE ANY BRAND. EMAIL: HELLOELISA@ICLOUD.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 330-336 DL SERIES EXCAVATORS EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (RI): CATERPILLAR 4+ MISCELLANEOUS EQUIPMENT. I AM HELPING A FRIEND TO FIND A PART FOR HIS CAT MODEL 426, SERIAL #7BC02647, PART #9R383. IT WOULD BE REALLY HELPFUL IF THIS PART WAS AVAILABLE IN EASTERN USA, ESPECIALLY IN THE NORTHEASTERN STATES, AND AVAILABILITY, PRICE, AND SHIPPING ARE IMPORTANT IF THE PART IS AVAILABLE ELSEWHERE. THANK YOU FOR YOUR HELP. EMAIL: JOETTAKIRK@AOL.COM ––––––––––––––––––––––––––––––––
Page 60 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944
• Northeast Regional Event December 16 - 17, 2020
• Toronto, Canada November 23 - 24, 2020 For: Virtual/Live – Large Late Model Rental Fleet Ag/Construction/Utility Equipment Auction
• Chehalis, WA December 18, 2020
• Delaware, OH Wed., December 2, 2020 For: Large Late Model Construction Equipment & more • Logan, OH Thurs., December 3, 2020 For: Rental Fleet Construction & AG Equipment
• Great Plains Regional Event December 17 - 18, 2020
• Midwest Ag Timed Auction December 18, 2020 • Orlando, FL February 15 – 20, 2021 BAR NONE AUCTION www.barnoneauction.com 866-372-1700
Coming Auctions
MEEKINS AUCTION COMPANY www.meekinsauction.com 910-739-0547
STEFFES GROUP INC. www.steffesgroup.com 701-237-9173
To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
• Lumberton, NC Tues., December 29, 2020 For: 26th Annual Construction Truck Auction
• TIMED ONLINE ONLY November 20 - 25, 2020 For: Upper Midwest Locations
HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Marietta, PA December 10 - 12, 2020 For: Winter Contractor’s Auction
• Online/Sacramento, CA Sat., December 12, 2020 For: Monthly Public Auction
HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493
• Ithaca, NY Sat., December 5, 2020 For: Construction Equipment & more Retirement Auction
• Online/Woodburn, OR Sat., December 19, 2020 For: Monthly Public Auction
• Marietta, PA Fri., December 11, 2020 For: Trucks, Trailers & Equipment Consignment Auction
• TIMED AUCTION December 5 - 10, 2020 For: Large 1-Owner Construction Equipment & more
BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO
• Marietta, PA Fri., February 12, 2021 For: Trucks, Trailers & Equipment Consignment Auction
• Syracuse, NY Wed., December 9, 2020 For: Rental & Wood Machine Shop & Commercial Real Estate
• ONLINE ONLY November 24, 2020 • ONLINE ONLY December 1, 2020
• Fort Worth, TX Thurs., December 10, 2020 For: Secure Party Auction, Construction Equipment
• ONLINE ONLY December 8, 2020
• Las Vegas, NV Sat., December 12, 2020 For: Large Aerial Lift, Forklift, Construction Equipment & more
• ONLINE ONLY December 22, 2020
RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 All our auctions are now online bidding only! • Grande Prairie, AB November 23 - 25, 2020 • Rocky Mountain Regional Event December 2 - 3, 2020 • Atlanta, GA December 3, 2020 • Edmonton, AB December 7 - 8, 2020
• ONLINE ONLY December 15, 2020
• ONLINE ONLY December 23, 2020 • ONLINE ONLY December 30, 2020
• Fort Worth, TX December 8 - 9, 2020 • Sacramento, CA December 9, 2020 • Williston, ND December 10, 2020 • Southwest Regional Event December 10 - 11, 2020 • Montreal, QC December 10 - 11, 2020 • Nashville, TN December 11, 2020 • Great Lakes Regional Event December 15 - 16, 2020 • Chehalis, WA December 16, 2020
BUNCH BROTHERS AUCTIONEERS www.bunchbrothersauctioneers.com 270-376-2992 • Louisville, KY December 8 - 9, 2020 For: 2-Day Fall Louisville Auction DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853 • Stoutsville, OH Sat., December 12, 2020 For: Winter Columbus Heavy Equipment Truck & Trailer Auction
• ONLINE ONLY Tues., November 24, 2020 For: Truck & Equipment Auction
• Crestview, FL Tues., December 8, 2020 For: Retirement Auction – Jerry’s Concrete & Site Contractors, LLC
BIG IRON www.bigiron.com 800-937-3558
• ONLINE ONLY December 16, 2020
JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200
• LIVE ONLINE Wed., December 2, 2020 For: Heavy Equipment, Trucks, Trailer & Misc. Auction
• Princeton, WV Tues., December 1, 2020 For: Absolute Auction Liquidation Pete Gould & Sons
• ONLINE ONLY December 9, 2020
• ONLINE ONLY December 3 - 10, 2020 For: Kenmore Heavy Equipment Auction
• ONLINE ONLY Tues., December 1, 2020 For: Job Site Housing Auction
IRON AUCTION GROUP www.ironauctiongroup.com 864-546-1216
• ONLINE ONLY December 2, 2020
• ONLINE ONLY December 9 - 16, 2020 For: Construction Equipment, Log Home Mfg. & Rolling Stock
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230
• ONLINE ONLY December 29, 2020
• ONLINE ONLY November 25, 2020
JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246
• ONLINE ONLY Wed., December 9, 2020 For: Local MS Municipalities • Pelzer, SC Thurs., December 10, 2020 For: East Coast Winter Public Auction
MOTLEYS INDUSTRIAL www.motleys.com 1-877-MOTLEYS • ONLINE ONLY December 4 - 10, 2020 For: Late Model T/A Road Tractors PIRRUNG AUCTIONEERS, INC. www.pirrunginc.com 585-728-2520 • Woodland, PA Sat., December 12, 2020 For: Public Auction: Truck Tractors, Trailers, Forestry Line PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Tues., December 1, 2020 For: Government Auction • ONLINE ONLY Wed., December 2, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., December 3, 2020 For: Construction Equipment • ONLINE ONLY Wed., December 9, 2020 For: Ag Equipment Auction
• ONLINE ONLY Tues., December 15, 2020 For: Surplus Items from Ohio Contractors, Vistra Energy & Others
• ONLINE ONLY Thurs., December 10, 2020 For: Truck & Trailer Auction
• ONLINE ONLY Tues., November 24, 2020 For: Timed Auction
• Stanton, TX Wed., January 13, 2021 For: Permian Basin Unreserved Public Auction
RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395
• TIMED ONLINE ONLY Wed., December 2, 2020 For: Online Auction for Riviera Beach, FL
• Gillsville, GA Tues., January 19, 2021 For: Contractor Inventory Reduction Public Auction
J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163
• TIMED ONLINE ONLY Wed., December 9, 2020 For: Online Auction for Villa Rica, GA • TIMED ONLINE ONLY Wed., December 16, 2020 For: Online Auction for Rome, NY
McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811
• Lebanon, TN Sat., December 12, 2020 For: Heavy Machinery, Farm Equipment, Trucks & Trailers Onsite & Online ROSEN & COMPANY, INC. www.rosenandcompany.com 216-990-1831
• ONLINE ONLY Tues., November 24, 2020 For: Virtual Live Farm & Construction Equipment
• LIVE ONLINE Fri., December 4, 2020 For: End of 2020 Equipment/Machinery Consignment & CMHA Auction
J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085
• ONLINE ONLY Tues., December 1, 2020 For: Virtual Live Farm & Construction Equipment
RTI AUCTIONS www.teitsworth.com 585-243-1563
• Montgomery, AL December 8 - 9, 2020 For: 47th Annual End of Year Auction
• ONLINE ONLY Tues., December 8, 2020 For: Virtual Live Farm & Construction Equipment
• ONLINE ONLY November 17 - 24, 2020 For: November NetAuction: Edition 2
• TIMED ONLINE ONLY November 20 - 30, 2020 For: Badlands Power Fuels Equipment Reduction Auction • TIMED ONLINE ONLY Nov 30 – Dec 9, 2020 For: Central Equipment Sales Inventory Reduction Auction • TIMED ONLINE ONLY December 1 - 8, 2020 For: Multi-Party Construction Equipment Auction • West Fargo, ND Wed., December 2, 2020 For: AgIron Event • ONLINE ONLY December 3 - 10, 2020 For: Steffes Construction Consignment Auction • ONLINE ONLY December 4 - 9, 2020 For: Timed Online Upper Midwest Locations • Mt. Pleasant, IA Thurs., December 17, 2020 For: AgIron Event • ONLINE ONLY December 18 - 23, 2020 For: Timed Online Upper Midwest Locations VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Live Virtual Auction Sat., January 23, 2021 For: January 2021 Auction WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Only & Absentee Only Fri., December 11, 2020 For: Public Construction Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Sat., December 12, 2020 For: Live Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • North Baltimore, OH Thurs., December 10, 2020 For: Ohio Auction • Kissimmee, FL February 10 - 13, 2021 For: 47th Annual Florida Auction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 61
PUBLIC AUCTI U ON
James G. Murphy Co. 4 425.486.1 1246 murphyaauction.com KENMORE HEAV VY EQU UIPMENT, CONTRACT TORS
-BID O ONLINENL LINENO MINIM MU UMS MS NO RESER E VES
EQUIPMENT & VEHICL LES - ONLINE AUCTIO ON Start Date: 11:00 AM | Thursd day - December 3 End Date: 11:00 AM | Thursdaay - December 10 Preview: 8:00 AM to 4:00 PM M | December 8 & 9 L Locatio ion: 18226 68 68th h Avenuee NE., Kenmore, WA 98028
1999 VERMEER D24X40A
4,272 H HOURS OURS
2015 KOBELCO SK230 0SRLC-3 (GRAPPLE TO BE SOLD SEPA ARATELY)
KOMATSU PC100-6E
2013 CAT 349EL
2012 12 CAT 336E
1,544 HOU HOURS RS
2006 JOHN DEERE 250D
2006 CA AT D6R LGP SERIES III
2013 CAT 980K
70,300 MILES
2001 STERLING G
2011 KENWORTH T800
2017 MCCLOSKEY Y S130 DT2 TRACKED ED SCREENING PLAN NT
2007 JOHN HN DEERE CT332
1,500 HOU HOURS RS
MGL 36”X60’ HYDRAULIC ST TACKING CONVEYOR
1,880 H HOURS OURS U
3,305 HOU HOURS RS
2005 JCB 506C-HL
ITEMS TO BE A AUCTI UCTIONED D ROLL OFF TRUCK TRACKED SCREENING NG PLANT (2) ROLL BACK ACK TRUCKS DIRECTIONAL DRILL (5) FLATBED D TRUCKS 36”X60’ HYDRAULIC STACKING ((4)) VAN TRUCKS UCKS CONVEYOR (8) TRAILERS RS WHEEL LOADER (2) CRAWLER TRACTORS TORS (6) HYDRAULIC EXCAVATORS AVAT 6X6 ARTICULATED HAUL TRUCK (3) TELESCOPIC FOR RKLIF (2) SKIDSTEERS SIDE BOOM FLAIL MOWER OWE MOBILE BROOM PNEUMATIC TIRE FORKLIFT ORKL (4) DUMP TRUCKS HYDRO/VAC TRUCK JET RODDER TRUCK K BUCKET TRUCK (2) TRACTORS 2006 GRAD GRADALL GR ADA ALL G6 G6-42A 42A
Page 62 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Buying or Selling? Call any of these professional auction companies
Why Use Iron Bound? That’s easy... It’s SIMPLE and EFFECTIVE! We’ll market and sell your equipment, get top dollar for you and we’ll take the hassle out of the process. A Strategic As sset Managemen nt Full Service e Auction House vantageauctions.c com
951.228.90040
THE T TIME IS NOW W
Conveniently located for sellers in the Permian Basin, West Texas, the Panhandle & New Mexico.
Address: Iron Bound Solutions LLC 750 US HWY 180 Seminole, TX 79360 Phone: 432-209-5112
ONLIN NE AUCTION • ODESSA, TX X
SERVICES, LLC
150 RO R ROAD AD TRACTORS TRA T CTORS O
LAATE TE MODELL T/A ROAD D TRACTORS Grreeat Sellection off PPeterbilt eterbilt and W Western estern Star Star
BID 12/4 4 – 12/10
44
T/AA Roadd Tractors t
2014 W Western e estern Star Star 4900SF T/A Road Road Tractor Trractor a
48
Hydraul a ic Road Tractors
48
Comprressor s Roadd Tractors
6
Winnch Road Trractors
2013 PETERBILT PETERBIL 367 T/A Hydr Hydraulic a aulic Road Road Tractor TTrractor a
4
Blow wer Road Tractors
BIDDING OPENS: Fri., 12 2/4, 5 PM, CST BIDS B BEGIN CLOSING: Thurs., 12/10, 11 AM M, CST 1-877-M MOTLEYS • motleys.com y com
VAL16 V AL16
2013 PPeterbilt eeterbilt 367 T/A Compressor Compr o p essor s Road Road Tractor Trractor a
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 63
Page 64 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Austin Bridge & Road Rebuilds Seven Bridges On U.S. 82 AUSTIN from page 1
Construction Progress Thus far, ABR has completed construction of all seven bridges; cast-in-place and precast drainage extensions with head and wing walls; and 18.5 mi. of the new westbound roadway, of which, the eastern 10-mi. section has been opened to the traveling public by executing a partnering change to construct a temporary detour mid-project. Once the remaining 1.5 mi. are completed, the westbound traffic on the existing lanes will be switched to the new westbound lanes so the existing lanes can be transformed into the new eastbound lanes by constructing turn lanes and crossovers and a 2-in. overlay. The overlay is being done in accordance with the proposed plans and TxDOT specifications. “We were able to start milling operations and turn lane/crossover construction for Phase 2A on the eastern 10mile section because of a proposed change to TxDOT, allowing us to open up the westbound lanes in that half of the project to the traveling public,” said Thomas Burr, ABR’s senior project manager. “We have made a couple of large changes that have helped TxDOT financially and ABR in advancing the schedule. The plans called out for a secondary seal coat on top of the base asphalt and underneath the surface asphalt. The secondary seal coat is season controlled and not temperature controlled like asphalt is. We proposed a spray paver option, controlled by temperature, allowing us to schedule paving operations through November, instead of stopping near the end of October.” The last bridge was completed in March 2020, with all of bridges consisting of two lanes, 36-in. round columns, rectangular caps, TX 54 and TX 40 beams and full width concrete panels. The bridges at FM 100, SH 78 and SH 121, which spanned traffic, are 300 ft. in length, following with Bullard Creek at 440 ft. After those were built, crews focused on the bridges at Bois D’arc Creek (945 ft.), Bois D’Arc Relief (660 ft.) and Sloan Creek (460 ft.). Construction crews had to overcome weather issues to start. “It immediately started raining and we had one of the wettest winters on record for Texas between October and March,” said Burr. “We encountered poor subgrade conditions, with change orders from TxDOT to remove and replace the poor soil with stable material. Additionally, we were required to perform some subgrade stabilization to progress the work. This job is south of the Red River and if there is rainy weather in the area, it’s more than likely that we’re going to get it. “Because we made several modifications to the plans and poor site conditions delayed the proposed work, TxDOT and ABR agreed to track days lost and gained and discuss at the end of the project,” he added. “We lost around 50 days due to the poor subgrade conditions, however, with the paving change, our schedule showed an 80 day gain, netting 30 days ahead of the original schedule.” The poor soils were removed due to the high water content with PIs in the 60s and 70s. “It was pumping water underneath the construction equipment,” said Burr. “Utility impacts have been minimal – there were some miscellaneous water lines and electrical lines from traffic signal poles. It’s a fairly wide right-of-way, so initially we had plenty of room for phases 1A and 1B – between 100 and 150 feet. But space was lost as we constructed lanes, ditch lines, and backslopes. Phases 2A and 2B will be your typical phased up construction within a divided
highway, with lane closures on each side and working in the the areas had to be seeded prior to advancing. Hammett median area.” Excavation Inc. was responsible for the earth work, site prep “Because we started in the wet season, we worked with and flex base installation. the bridges that were over traffic as they had a hard surface “As soon as they finished two miles, we were right behind underneath and we didn’t have much difficulty with gaining them doing the backfill work, seeding and paving,” said access,” said Burr. “We were also able to construct the Burr. “We never had that 5-mile section because we were Bullard Creek Bridge. We had to wait for the dry season for right behind them building the road. In 2019, the weather the last three bridges and because the ground conditions was really good in late spring all the way through fall and were so poor in these areas, we had to remove some of the Hammett was able to perform it operations quickly, pushing soil and replace with more stable soil so we could gain the five-mile threshold. We told TxDOT we’re going to build access with our equipment.” continuously with multiple operations in succession. We Two self-assembling/disassembling Linkwere steadily progressing and it Belt telescopic crawler cranes – a 140 ton never became an issue.” and 250 ton – were used to help set beams at Hammett, a local company the Bois D’arc Creek, Bois D’arc Relief and based in Dodd City, Texas, that Sloan Creek bridges, which were ¾ of a mi. was founded in 1963, is now from each other. run by Gaylon Hammett, the “These creeks have flooded many times son of founder Harry Hammett. over the recent months, creating inaccessible “They have a ton of expericonditions for the heavy equipment required ence moving dirt and they had to set the concrete beams,” said Burr. “The the right equipment; articulatearth work operators excavated up to 8 feet ing trucks, excavators and tracof unusable material, replacing with dry, tors with pans that were beneficompactable material. Even after the soil cial for moving large amounts replacement was complete, the ground conof earth, and connections in the ditions were not desirable for the heavy area for off-road trucking,” said cranes. Therefore, the areas where the cranes Burr. “And they have new would be turning to gain access between equipment. They get so many bents and/or crawling with a beam in midhours on it, do a swap and get a air, were additionally stabilized with crane new unit. You couldn’t ask for mats. better – they excelled with per“Purchasing crane mats to stabilize all the forming flex base and cement work areas in advance would have been very ABR successfully and safely set 115 stabilization.” costly, therefore the structures crew setting TX40 concrete beams – 80-ft. to 95-ft. Approximately 1,000,000 the concrete beams was required to move in length — with each beam set com- cu. yds. of material was excacrane mats before, during and after each pleted by two cranes working in sync vated, with some of the materithree bridge locations, 23 different al recycled on-site and 300,000 span of beams were set, sometimes multiple at pick locations and 12 crane mobilizatimes a day,” he added. cu. yds. wasted off-site. tions in 18 working days. In addition, the 140 ton crane was mobi“This was a waste job and lized eight times and the 250 ton crane was what made Hammett a key mobilized four times, which required specialized trucks to player was that they owned a bit of land adjacent to the move the 150,000 lb. (140 ton crane with tracks) and ROW where they could place some and having good con110,000 lb. (250 crane body only), along with several sup- tacts in the area, they were able to waste and borrow material port trucks for mobilizing the tracks and counter weights. from adjacent properties,” said Burr. “This allowed them to Despite the undesirable ground conditions, adverse tem- use articulated trucks in lieu of on-road vehicles and transperatures and many other challenges, ABR successfully and porting a long distance.” safely set 115 TX40 concrete beams – 80- to 95-ft. in length, For the earth work, Hammett had GPS-equipped excavawith each beam set completed by two cranes working in tors. sync at three bridge locations, 23 different pick locations and The excavation/embankment operations began on the east 12 crane mobilizations in 18 working days. end, with large cuts and stockpiling. As the work progressed Rambo Contracting constructed the cast-in-place box cul- west, large amounts of embankment were encountered. With vert extensions and ABR crews completed the installation of permission from TxDOT and the county, trees, brush and the precast RCB, RCP and SETs. other materials were burned on-site. On the west end of the westbound lanes, three new ramps Burr stressed that the paving was “straight forward” and are being constructed near SH78 and SH121 (two exit and that traffic wasn’t a concern, except when operations one on), on the eastbound lanes, an existing crossover/ramp approached intersections and the tie-in with the end. is being modified to eliminate the crossover and extend the “The biggest trouble was getting the balance between on-ramp to meet TxDOT specifications. Hammett’s earth work operation and our hot mix operaSouthern Cross is the subcontractor installing the perma- tions,” said Burr. nent road signs as back fill and seeding operations complete. To-date, the permanent signs have been installed for the east Materials 10 mi. section, with installation in progress for the western Materials removed will include 300,000 cu. yds. of soil section. and 50,000 tons of recycled asphalt. New materials should The new lanes are being constructed on green land. tally more than 300,000 tons of asphalt and more than 5,000 TxDOT restricted construction to 5 mi. of disturbed soil, and cu. yds. of concrete. CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 65
Page 66 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AFE ...................................................................................................6 ALEX LYON & SON INC LAS VEGAS NV / HOUSTON TX ..........................................65 ASV .................................................................................................20 AUCTION BLOCK ...........................................................................62 BARGAINS ......................................................................................58 BELL TRUCKS AMERICA INC..........................................................7 CALVIN GROUP INC ......................................................................12 CARLSON PAVING PRODUCTS INC............................................36 CEG SCALE MODELS....................................................................10 COMMERCE TRUCK & EQUIPMENT SALE...................................5 CONSTRUCTION EQUIPMENT GUIDE..............................16,59,63 DYNAPAC...................................................................................34,35 ECCO EQUIPMENT........................................................................13 FELLING TRAILERS .......................................................................41 FLANGE LOCK..................................................................................6 HENDRIX MACHINERY LLC ............................................................3 HITACHI EXCAVATOR ....................................................................24 HYUNDAI CONSTRUCTION EQUIPMENT ..............................18,19 IEDA .................................................................................................11 IMPACT ROLLER TECHNOLOGY INC..........................................36 INTERSTATE TRAILERS ................................................................43 IRON BOUND AUCTIONS..............................................................62 JAMES G MURPHY CO KENMORE WA .......................................................................61 JCB INC ...........................................................................................23 JFW EQUIPMENT INC ...................................................................28 JOHN DEERE....................................................................................2 JOHN DEERE SKID STEER...........................................................51 KAGE ...............................................................................................57 KIRBY-SMITH MACHINERY INC....................................................68 KOMATSU AMERICA CORP ..........................................................15 LEEBOY...........................................................................................37 MAGELLAN CONSTRUCTION.......................................................25 MAULDIN PAVING PRODUCTS.....................................................32 MOTLEYS ASSET DISPOSITION GROUP ...................................62 N C MACHINERY..............................................................................6 NPK CONSTRUCTION EQUIPMENT INC.......................................9
RITCHIE BROS. AUCTIONEERS UNRESERVED PUBLIC AUCTIONS.....................................67 ROADTEC INC ................................................................................29 SAKAI AMERICA INC......................................................................33 SIDUMP'R........................................................................................47 SMITHCO ........................................................................................49 TAKEUCHI ..................................................................................52,53 THUNDER CREEK..........................................................................48 TORO...............................................................................................24 TROPHY TRACTOR .......................................................................14 VANTAGE AUCTIONS ....................................................................62 VOLVO COMPACTION ...................................................................30 VOLVO CONSTRUCTION EQUIPMENT .......................................54 WACKER NEUSON ........................................................................17 WIRTGEN AMERICA ......................................................................31 YANMAR AMERICA CORP.............................................................21 CALIFORNIA SUPPLEMENT BAR NONE AUCTION.......................................................................1 CALIFORNIA CAT GROUP...............................................................3 CONSTRUCTION EQUIPMENT GUIDE ..........................................7 GARTON TRACTOR INC................................................................11 JCB CALIFORNIA ...........................................................................12 PIRTEK CALIFORNIA .......................................................................5 SCOTT EQUIPMENT - FONTANA ...................................................2 WESTERN RENTALS .....................................................................11 PACIFIC NORTHWEST SUPPLEMENT CASCADE TRADER .........................................................................3 CONSTRUCTION EQUIPMENT GUIDE ..........................................9 JAMES G MURPHY CO....................................................................1 JET CITY EQUIPMENT.....................................................................5 LANDMARK EQUIPMENT ..............................................................11 MODERN MACHINERY....................................................................2 OREGON TRACTOR ........................................................................7 ORION EQUIPMENT ......................................................................12 TRIAD MACHINERY........................................................................11
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 22, 2020 • Page 67
Unreserved public equipment auctions
Equipment Financing by equipment experts.
2015 Caterpillar 627K | Fort Worth
2017 Caterpillar 745C | Fort Worth
Volvo A40D 6x6 | Sacramento
Demag AC140 170 Ton 10x8x8 Rocky Mountain Regional Event – Located in Denver
2012 Caterpillar 336EL Rocky Mountain Regional Event – Located in Denver
1 of 3 – Tadano GR800XL-1 80 Ton | Fort Worth
Caterpillar D6R LGP | Sacramento
2013 Caterpillar 950K | Sacramento
2018 Volvo L110H | Chehalis
60,620+ items in 100+ auctions including Rocky Mountain Regional Event Dec 2–3 Atlanta, GA Dec 3 Fort Worth, TX Dec 8–9 Sacramento, CA Dec 9 Williston, ND Dec 10 Southwest Regional Event Dec 10–11
Nashville, TN Great Lakes Regional Event Northeast Regional Event Great Plains Regional Event Chehalis, WA Orlando, FL
Dec 11 Dec 15–16 Dec 16–17 Dec 17–18 Dec 18 Feb 15–20
IMPORTANT MESSAGE: Due to COVID-19, all of our auctions are now online bidding only. For the most up-to-date information visit rbauction.com/covid-19
Financing & leasing available
Online bidding information
Up to 100% financing, with no money down.
▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!
More items added daily Call about selling: 1.800.211.3983
See full auction & equipment listings at rbauction.com
Auction Company License # 001348, Auctioneer Frederick R. Vilsmeier # AUNR003087, Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701, Used Motor Vehicle Dealer License #2647, Auctioneer Chad M. Johnson # 17668, Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728, Auction Company Bond #0470724, Auctioneer Trevor J. Moravec Bond # 0466225, Auctioneer James L. Valentine #5623, Auctioneer Kevin L. Perry # 2763, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auction Firm # 2008000166, Auctioneer Kevin L. Perry # 2002000227, Motor Vehicle Dealer License #DLR25867, Auctioneer Steve A Seykora # 74-19-006
Page 68 • November 22, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE