Western 22, October 24, 2021

$3.00

Published Nationally ®

Western Edition

October 24 2021 Vol. XXII • No. 22

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Full story on page 26 Hitachi’s New Tech Options for Excavators...12

Cat D4 Dozer Offers More Visibility, Productivity...54

Manhattan Construction built the new 40,300-seat stadium in a little over 30 months.

Industry Professionals Gather at Utility Expo...72

Table of Contents................4 Paving Section..............27-41 Crawler Loaders, Dozers Section..........................53-60 Auction Section............69-75 Business Calendar ............71 Advertisers Index...............74

Manhattan Construction was honored with AGC’s Build America Award (New or Renovation $100 Million or More) for its work on Globe Life Field in Arlington, Texas.

Facing, Recovering From Economic Perfect Storm Industry Experts Offer Solutions for the Trifecta of High Costs, Broken Supply Chain, Low Demand The construction industry is doing its level best to deal with a rare triple punch: Unusually high and rising materials costs, a massive supply-chain bottleneck and decreasing demand for projects. The ripple effect of these challenges could weaken the contractor community, but a heavy dose of cooperation and communication is helping many to navigate the challenges.

Cooperation and communication are exactly what the AGC’s Ken Simonson suggests will help reduce the damage from

By Lucy Perry

CEG CORRESPONDENT

see CHALLENGES page 52

Project owners should recognize the need for adjustments in price or delivery date of projects awarded or commenced early in the pandemic or before, when conditions at suppliers were far different.

Page 2 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Lawrence Construction Fixes I-70 Mudslides in Colorado

The canyon was impacted by several major materials slides, including mudslides earlier in the summer.

The Colorado Department of Transportation has awarded contractor partner, Colorado-based Lawrence Construction, the I-70 Glenwood Canyon Emergency Project. Motorists traveling on Crews are excavating and hauling debris from Interstate 70 in Glenwood the mile point 123.5.

Canyon should anticipate delays, At mile point 123.5, crews are excavating as well as intermittent daytime and nighttime mudslide material surrounding the 7-ft. by 7closures, due to repair work. This current ft. concrete box culvert that runs beneath the phase of the emergency project is estimated interstate from Blue Gulch to the river. at $6.1 million.

CDOT crews have uncovered the culvert The canyon was impacted by several inlet, which was severely damaged due to major materials slides, including mudslides the mudslides. The contractor team now is earlier in the summer on July 29 and 31. The working to determine how much debris is in debris did considerable damage to the inter- the culvert and the extent of the damage and state at Mile Point 123.5, known as Blue repairs that will need to be made.

Gulch.

Additionally, crews are excavating and “We are encouraged to get this project hauling debris from the mile point 123.5 kicked off and have a contractor that mobi- location to begin the first phase of roadway lized so quickly and is using a plethora of and retaining wall reconstruction. Portions local help,” CDOT Executive Director of the eastbound roadway retaining wall Shoshana Lew said. “We understand how adjacent to the recreation path were impactful the closures of the canyon are on destroyed or severely damaged in the event. the local economy. Gov. Polis has been clear This wall infrastructure supports the eastthat he wants everything completed before bound lanes.

Thanksgiving, and we are optimistic we will On the westbound deck, removal and have the interstate back open to four lanes at rebuilding of the damaged parapet wall, and this location by the end of November.” concrete deck will be in tandem with the Crews have been actively setting up per- work on the culvert. manent traffic control barriers at the Blue Repairs to the recreation path will round Gulch location, where a majority of the out the project as well as continued debris repair work will start. The initial damage and removal, railing and barrier repair at several clean up after the materials slides required an locations throughout the canyon that experiextended closure of I-70 in Glenwood enced material slides.

Canyon to ensure the safety of the traveling Lawrence Construction is using several public. The interstate is now open in the local subcontractors that all have experience canyon, with the Blue Gulch section of road- in Glenwood Canyon. The subs are from way down to one lane each direction due to Gypsum, Silt, Carbondale and Grand temporary and long term repairs.

Junction. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 3

"In Business for over 33 Years" www.hendrixmachineryllc.com 2019 Case 580N, Stk#: 12627, OROPS, 4WD, 865 hrs., 4&1 Front Bucket, Ext-hoe ......$78,500

2009 Broderson IC80-2H, Stk#: 12456, 18,000 lbs., 46 ft., 1,352 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires ............................$21,500

Se Habla Español

2016 Dynapac CA1500P, Stk#: 12777, OROPS, 66" Pad Drum, 2,070 hrs., 14.9x24R3 Tires, Duetz Eng ..............................................$46,500

2017 John Deere 750K LGP, Stk#: 12928, 2014 Laymor SM400, Stk#: 12756, EROPS, A/C 2015 Dynapac CA1500, Stk#: 12526, EROPS, A/C & Heat, AM/FM Radio, 66" Smooth Drum, EROPS, A/C & Heat, Radio, 6 Way Blade, 80% & Heat, 567 hrs., Water System, 8 ft. Broom, U/C, 4,074 hrs., 34" Pads, 12 ft. Wide $142,500 225x75Rx15 Tires, 4 Cyl. Kubota Eng ....$29,500 267 hrs., 14.9x24R3 Tires, 4 Cyl. Detuz ..$69,500

2018 Cat D6N LGP, Stk#: 12876, EROPS, A/C & Heat, Radio, Sweeps, Rear Screens, 6 Way Blade, 3,647 hrs, 33" Pads, 13'4" Wide$179,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

2013 Komatsu D21P-8E0, Stk#: 12908, OROPS, 2017 Cat 330FL, Stk#: 12879, EROPS, A/C & 2018 John Deere 650K LGP, Stk#: 12883, Heat, Radio, 4,585 hrs., 90% U/C, 34" Bucket, EROPS, A/C & Heat, Radio, 6 Way Blade, 2,550 6 Way Blade, 2,984 hrs., 90% U/C, 20" Rubber hrs, 80% U/C, 24" Pads, 10' 4" ft. Blade$99,500 Tracks, 8' 6" Wide ..................................$42,500 32" Pads, Aux. Hyd., 11' 2" Wide ........$139,500

2019 Kobelco SK140SRLC-5, Stk#: 12894, EROPS, A/C & Heat, Radio, 3,063 hrs, 80% U/C, 2018 Cat 299D2 XHP, Stk#: 12897, EROPS, A/C 42" Bucket, 24" Pads, Steel Tracks w/Rubber ...... & Heat, 3,525 hrs., Aux. Hyd., 84" Bucket, 18" ..............................................................$92,500 Rubber Tracks, 90% U/C. ......................$58,500

2004 Yale GLP060VX, Stk#: 12914, 5,450 lbs., 10 ft., 48" Forks, 44" Frame, 28x9x15 Front Tires, 5.60x10 Rear Tires, Vortec 2400 GM Eng. ..............................................................$12,500

2010 Cat 140M, Stk#: 12901, EROPS, A/C & 2014 Bomag BW211D-50, Stk#: 12214, 84" Heat, Radio, 7,547 hrs., 14 ft. M/B, 17.5x25 Tires Smooth Drum, 810 hrs., 23.1x26 Tires @ 50%, @ 60% to 70%, Front Aux. Hyd...........$107,500 Deutz Eng...............................................$59,500

2012 Genie S40, Stk#: 12106, 500 lbs., 40 ft., 3,307 hrs., 12x15.5 Foam-Filled Tires, 3 Cyl. Deutz Eng ..............................................$26,500

2017 Cat 279D CTL, Stk#: 12926, EROPS, A/C & Heat, Radio, 2,658 hrs., 18" Rubber Tracks, 48" Forks, 46" Frame ......................................$46,500

2013 Case 570N, Stk#: 12824, OROPS, 4WD, 5,904 hrs., 84" Front Bucket, Box Blade, 19.5x24 Rear Tires, 12x16.5 Front Tires @ 90% $26,500

2018 Cat 315FL CR, Stk#: 12867, EROPS, A/C & Heat, 3,014 hrs., 36" Bucket w/Krypto Klaw Thumb, Steel racks w/Rubber Pads, Cat Hyd. 2019 Link Belt 210X4EX, Stk#: 12895, EROPS, Quick Coupler, 2007 JLG 600A, Stk#: 12144, 500 lbs., 60 ft., A/C & Heat, 3,209 hrs., 80% U/C, 48" Bucket w/Hyd. Thumb, Aux. Hyd., 32" Pads, 12 ft. Stick, 2,394 hrs., 355x55Dx625 Foam Filled Tires, 4 Cyl. 2 Way Hyd. 10' 6" Wide ..........................................$126,500 Deutz Eng ................................................$22,500 $136,500

2016 Cat 326FL, Stk#: 12910, 60 ft. Long Reach, 2016 Dynapac CA1500, Stk#: 12778, OROPS, EROPS, A/C & Heat, Radio, 4,697 hrs., 90% U/C, 66" Smooth Drum, 2,107 hrs., 14.9x24R3 Tires 2019 Cat 903D, Stk#: 12933, OROPS, 3rd Valve 60" Ditching Bkt, 32" Pads, 11' 2" Wide $159,500 @90%, 4 Cyl. Deutz Eng. ......................$46,500 Hyd., GP Bucket ....................................$49,500

2019 Linkbelt 245X4, Stk#: 12843, EROPS, A/C & Heat, Radio, 3,885 hrs., 31 1/2" Pads, 24" Bucket..................................................$129,500

2011 Volvo A25E, Stk#: 11745, EROPS, A/C & Heat, 6WD, 11,000 hrs., 25 Ton Cap., 23.5Rx25 Tires ......................................................$95,500

2017 John Deere 60G, Stk#: 12915, EROPS, A/C & Heat, Radio, 1,044 hrs., 80% U/C, 18" Bucket, Aux. Hyd., 16" Rubber Tracks, 80" Front Blade, 6' 8" Wide....................................$62,500

2013 Toyota 7FDV35, Stk#: 12809, 7,000 lbs., 4,026 hrs., 48" Forks 48" Frame, 250-15/7.00 Front Tires, 7.00x12/5.00 Rear Tires, 6 Cyl. Diesel Toyota Eng. ................................$12,500

2015 Cat 12M3, Stk#: 12898, EROPS, A/C & Heat, Radio, 6,678 hrs., Front, Hyd., 14 ft. M/B, Ripper, 17.5x25 Tires, 90% Tires ........$139,500

2019 Cat 926M, Stk#: 12932, EROPS, A/C & 2010 Cat 120M, Stk#: 12838, EROPS, A/C & Heat, Radio, 4,593 hrs., 8' 4" Bucket, Ride Heat, Radio, 8,378 hrs., 14 ft. M/B, Front Control, Coupler Hyd., 20.5Rx25 Tires, Auto Greaser, 41,447 lbs. Lift Cap., 8 ft. Wide$119,500 Implement Attachment ........................$102,500

2013 Cat 12M2 AWD, Stk#: 12902, ALL WHEEL 2010 JLG 600AJ, Stk#: 12136, 500 lbs., 60 ft., DRIVE, EROPS, A/C & Heat, Radio, 8,243 hrs., 2,928 hrs., 355x55Dx625 Tires, 4 Cyl. Deutz 14 Ft. M/B, 17.5x25 Tires @ 90%, Front Aux. Hyd. Front Push Block ........................$119,500 Eng.........................................................$29,500

2018 Cat 299D2 XHP, Stk#: 12897, EROPS, A/C & Heat, 3,525 hrs., Aux. Hyd., 84" Bucket, 18" Rubber Tracks, 90% U/C ......................$58,500

2012 Broce KR350, Stk#: 12921, EROPS, A/C & Heat, 1,039 hrs., 8 ft. Broom, Water System, Front Blade, LT225x75Rx16 Tires @ 90%, 4 Cyl. Kubota Eng. ................................$26,500

2016 Cat CS54B, Stk#: 12900, OROPS, 84" Pad Drum, 2,428 hrs., S70x75x26R3 Tires, 4 Cyl. Cat Eng. ..........................................................$89,500

2009 Broderson IC80-2H, Stk#: 12449, 18,000 lbs., 46 ft., 1,066 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires ............................$21,500

Page 4 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

®

FEATURES

2

IN THIS ISSUE 12

Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

16

72

To read these stories and many more, visit www.constructionequipmentguide.com

LAWRENCE CONSTRUCTION FIXES I-70 MUDSLIDES IN COLORADO

The Colorado Department of Transportation (CDOT) has awarded contractor partner, Colorado-based Lawrence Construction, the I-70 Glenwood Canyon Emergency Project.

8

WESTERN EDITION

TRANSPORTATION COMMISSION APPROVES NEW $7.7B PLAN

32

GOMACO INVITATIONAL #39 RETURNS TO IDA GROVE, IOWA

72

INDUSTRY PROFESSIONALS GATHER AT LATEST UTILITY EXPO

A state commission gave the green light to the Oklahoma Department of Transportation’s new $7.7 billion, eight-year construction plan. The plan is updated annually and covers approximately 300 more projects.

After an unprecedented year off, the GOMACO Invitational #39 returned, welcoming guests from the United States and Canada back to enjoy one another’s company and a few rounds of golf.

The 2021 installment of the Utility Expo was the largest in the show’s history, with more than 950 companies spread across more than 1.4 million net sq. ft. (32-plus acres) of the Kentucky Exhibition Center.

After seven years of mining, federal officials said work to carve out the eighth disposal area at the U.S. government’s underground nuclear waste repository is complete.

Deutz Corporation has chosen a location for its newest Deutz Power Center. The new facility, Deutz Power Center West, will be located at 6150 East Tropical Parkway, Suite 135 in North Las Vegas, Nev.

54

8

U.S. NUCLEAR REPOSITORY COMPLETES KEY MINING PROJECT

12

HITACHI DEBUTS GRADE CONTROL TECH OPTIONS FOR EXCAVATORS

Hitachi Construction & Mining Division, an operating division of John Deere Construction & Forestry Company, rolled out options for its grade control technology, on select excavators.

20

PRINOTH UNVEILS NEXT GENERATION PANTHER ROTATING DUMPER

44

44

DEUTZ’S NEWEST POWER CENTER WEST OPENS NOV. 1 IN VEGAS

KIRBY-SMITH PROMOTES KUNIN TO VICE PRESIDENT

Following the promotion of John Arapidis to president and CEO of Kirby-Smith Machinery Inc. the heavy equipment distributor recently named Mike Kunin as vice president of National Accounts.

50

BERGMANN AMERICAS ADDS 3,000-GAL. OFF-ROAD WATER TRUCK

Prinoth unveiled the next generation of the Panther T14R crawler carrier. Prinoth has increased the Panther’s speed and power, while adding a host of new features designed to boost uptime and operator performance.

Bergmann Americas’ product line is a great addition and fit to expand the product offering of all dirt moving applications, especially when contractors are faced with soft conditions, slopes and tight work zones.

Case Construction Equipment’s OEM-Fit 2D and 3D machine control solutions designed by Leica Geosystems, part of Hexagon, is now available for Case D Series excavators from Case SiteControl Certified dealers.

In the construction industry, the quality of cast-in-place concrete foundations, superstructure, slabs, stairs and architectural features, along with the speed of project completion, can largely depend on getting moisture measurement right.

21

CASE INTRODUCES OEM-FIT 2D, 3D SOLUTIONS FOR EXCAVATORS

25

NEW DIVISION WILL LOOK AT ‘BIG PICTURE’ CONSTRUCTION

The Oklahoma Department of Transportation is in the middle of a process to consolidate some of the functions it shares with the state turnpike authority and aeronautics commission, and ODOT is making some internal changes as well.

Founder, Publisher & CEO Western Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Dennis Hogeboom Teddy McKeon Craig Mongeau Robby Chakler Katherine Petrik Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

LinkedIn

Facebook

Twitter

RITCHIE BROS. TO BUY SMARTEQUIP FOR $175M

Ritchie Bros. Auctioneers and SmartEquip announced that they have entered into a definitive agreement under which Ritchie Bros. will acquire SmartEquip for approximately $175 million.

CEG’S 2021 CRAWLER LOADER, DOZERS COMPARISON CHART JOHN DEERE EXTENDS ITS SMARTGRADE DOZER WARRANTY

58

KOMATSU’S D71-24 HST DOZER FEATURES SLANT NOSE DESIGN

69 71

COMING AUCTIONS BUSINESS CALENDAR

14 16 27

VOLVO EW200E, EW240E Material Handlers CATERPILLAR 816 Landfill Compactor VOLVO Entry-Level Package for Compact Assist

DEPARTMENTS EQUIPMENT

Dennis Hogeboom

Kent Hogeboom

Patrick Kiel

Sharon Swanson

• Colorado • Louisiana • Oklahoma • Texas • New Mexico

National Sales Manager

• Idaho • Montana • Oregon • Washington • Wyoming

• Arizona • California • Nevada • Utah

952/353-1770 612/481-8557 Cell e-mail pkiel@cegltd.com

760-518-4336 Cell e-mail sswanson@cegltd.com

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

70

ENSURE QUALITY, SPEEDY PROJECTS WITH MOISTURE MEASUREMENT

58

CAT D4 DOZER OFFERS BETTER VISIBILITY, MORE PRODUCTIVITY

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

62

56

CRAWLER LOADERS, DOZERS SECTION

YouTube

602/679-8759 dennishogeboom@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034.

Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 5

563-8 872-44112 112

Bellevue (Dubuque), Iowa sales@jjscheckel.com jscheckel.com RENT OR

BUY!

2015 CA ATT D11T - $988,000 $9888,000

2002 CA ATT D11R - $185,000 $

2005 CA ATT D10TT - $388,000 $

Zero Hour Powertrain Componen p ts w// 4 yyearr,, 6,000 hr 7PZ High g Horse series, RRuns andd oper p ates to spec p , RJG S#, 1 Owner since new, LLow to midlife dl f componen p t Bl d SS factoryy Cat warrantyy. U Blade, S Riippe pperr,, GGood UC. U-blade ipp r.. A/ A/C, /C, HHeat. Could pp r,, U blade blade, Twin Twin w tilt tilt, Well maintained, i i d bl d w// twin tilt, SSS ripper /C ld use hours, SS ripper Excellent hhistory,y, straight str i & clean. Availa b Jan. 2022. paint, otherwise very straight ilable i h tracttor from good home. Clean, straight, i h and reputable machine. Priced to sell.

2017 CA ATT 390FL,, A02891 - $628,000 2017 CA ATT 390FL,, A029008 - $628,000

2019 CA ATT 374F 374FL FL - $618,000

2015 Deere 1050K - $328,000 $

2019 CA ATT D D6T LGP VP PA AT - $268,000 $

4,650 hours, SU Blade, M Multi l Sh Shankk Ripper pp r,, Top opcon A02962. 3,960 Tootal hours. 2 Ye Yearr,, 2,000 hhour warranty w GX60 Full Auto GPS syst sy em comes withh machine. remainingg until 9/2023. ARP Accugr g ade GPS readyy, hi Straight, clean & original M dirt machine. Good nd original with ddocumented doc history. iiginal i Midwest o d U/C, CClean l and hi

2019 CA ATT 336 Next Gen - $268,000 , 2020 CA ATT 330 3 Next Gen - $258,000 ,

6,200 Hours, 2 Year Y factory f y warranty remainingg, 6,885 Total hrs, 22,755 755 IIdle dl hrs, 2 Year Yeaar factory fac y warrantyy. 3,663 Hours, 2 Years Years off fact ffac oryy warrantyy remaining. 3,800 Hours, 11,367 367 IIdle dle hhours, Warranty W y untilil 9/2023. 1,138 Hours, 6266 aat idl idle, 2D Grade G d Control, C l Auxiliary A iliary 32’ Boom, 14‘5”” Stick S , 66”” 5 YYar ardd Bucket. Like LLik new U/C. 32’’ Boom, 14’5”” SStick, 66”” 5 Yar Yard bucket, Like Reputa p tion 1 owner maachine.

2D Grade control. 12’110”” SStick. 60”” Bucket.

B k 1 Ownerr,, hydraulics, Tool control, 10’6”” SStick, 4 years remaining k new UC. C hi Grade control.l di i t!

1 Ownerr,, Excellent Ex condition. Full documentation.

1 ownerr,, eexcellent condition, fulll documentation.

11’10” 0”” Stick.

Sti k 4 Yard 60”” buckket. Super clean machine! Original paint, Docum mented history,y, Clean C machine!

CAT Premier er Warranty. Will nott disappoint!

RENT OR

RENT OR

BUY!

2018 CA ATT 320 Next Gen - $159,000 $ ,

2017 Deere 210G LC - $$126,000

A02946. 2,623 totall hhours, 1,462 off thos h se hours h at idle, dl 1,760 Hours, Local trade-in, 9’6”” SStickk. 48”” 1.3 Yar Yard 2D Grade Control, 9’6”” Stick, S Aux Hydraulic Pkgg in stock. bucket. Deluxe cab. Offeredd wholesale.

This machine won’t dissapoint, save big $$ from new!

Compare pricing ffor or same yyeear and hours.

(3)2018 CA ATT 730C2’ 730C2’s - $278,000 8,000 EA. EA ((2)2014 ) CA ATT 730C’s 730C’ - $358,000 $$358 000 EA. EA 55,000 000 Hours, H Excellent rubberr,, Origin g nall ppaint, Maintenance historyy, Nice matchin hing set.

Rent/Lease or Buyy..

Ejj tor bodies, Ejec b di 8835 & 1,418 Hourrs. 1 Owner. Radial d l tires. g pain p t. All maintenaance historyy. Super p ti Original i l low l hour h trucks. Reent/Lease or Buy. B clean, original,

B POWERTRAIN PLUS REBUILDS

ROLLERBLADES HOLMES SMOOTH DRUM R

2014 CA ATT MH3059 MH30059 - $348,000 ,

8,250 Hours, Material handler lerr,, as nice as they h y come. li cabb, 325 HPP,, Ground access and high g rise se hydraulic 35’’ Boom, B 29’’ Stick, foor grapple. 130,000 lbs.

S k Setup S

2017 CA ATT 986H, 986H A002914 - $388 $388, 388,000

10,100 Total hours, 2,927 Idle hours, 2 Year/2,000 Year/2,000 hr CAT C Powertrain Warrantyy remaininngg. Agg ggrega g te handler pk p g, Ride control, 11 Yar Yardd GP bucket w// edge, d Excellent E ll tires. i

(4)2016 ) Volvo A A40G’s - $268,000 , EA. ((4)2015 ) CA AT 740C’s AT 740C’ - $$228,000 , EA. 55,400 400 Hour H trucks, Haalf idle time, Mat Ma ching h ggroupp.

V y goodd Tailga g tes, 1 Ownerr,, Excellent EEx condition. Very R d tires. Ready to Radial t go. Rent/Lease e or Buy. B

2018 Volvo Vol o L180H - $238,000

A02916. 6,250 Hourrs, 6.5 Yar Yardd GP bucket buck , 330 HPP,, 62,000 lbs, Auxillaryy hydaulic controls, Volvo dealer inspected. Clean andd str straight, original machine.

RENT OR

RENT OR

BUY!

NEW! BUY!

BUY!

Ejec Ej j tors, 9,000 HHour range g , Half idle dl time. 1 owner.

AAllll maintenance main e historyy. RRadial tires. Original g paint.

Super clean an trucks. tr k Rent/Lease or Buy. B

2007 CA ATT 826H - $288,000 ,

9,800 Hours on Complet pl e Dealer l Rebuild.

R b ld Goodd used compac p tor w/ fullll main maintenance & service history. i Ex ll feett, Clean cab, Tested to OEM specs.

Excellent

RENT OR

BUY!

Ready to ship!

Holmes 11F - $25,50 , 0 / 16F - $31,500 $ 2018 0 CA ATT RM500B RM5000B - $$580 580,000 2 Models, 11’ or 16’’ cuttingg widtth. Made in Iowa.

978 Hours. Remainingg 2 year e par p ts/service factory 2006 CA ATT D10T Rebuild Inn Process Constr uction ggrade d , extreme dduty. For haul h l roadd & site Cat Warranty. 1 Owner maachine hi , Universal rotor - $885,000. Zero hour Powertrain Plus, lleveling l , compacting & sealing l ddi dirrt prior to rain event. for both Asphalt Reclam mation or Soil Mixing.

OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

visit

JJSccheckel.com

2016 Volvo A400G & 2018 K-TTec ec 1237 2018 K-TEC C 1237 ADT - $198,000 Scraper p Pkg g - $500,000 5,906 5 hours on 37 Yar Yard capacit p ty pull scraper p r,, Less Le than h 800 hours. h

truckk. 2 Sets t Rigged igg d upp & ready dy tto go g . 37 yardd scraper p w// M cching Mat hi g ppair airi available, ill bbl Super p clean. l Can be hitchh & controlsl kkitit, orig hi iginal i l ttruckk ddump body included b included. l d d rigged to a Volvo V l o A4 / l for f addt’l ddt price.

A40G for o rent/sale

and watch w our new company vid deo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms!

Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaders, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com | follow us ffor @jjscheckel.com orr daily updates:

Page 6 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

//DUJH ,QYHQWRU\ RI 3RSXODU DQG DUJH ,QYHQWRU\ RI 3RSXODU DQG 1RW 6R 3RSXODU &RROLQJ 3URGXFWV 1RW 6R 3RSXODU &RROLQJ 3URGXFWV /& t KEΖd , s /d͕ t t/>> D < /d͊ & t KEΖd , s /d͕ t t/>> D < /d͊

x Z / dKZ^ x K/> KK> Z^ $WODQWD &LQFLQQDWL 'DOODV %DOWLPRUH '& +RXVWRQ &KDUORWWH /RV $QJHOHV &KLFDJR

3KLODGHOSKLD 3KRHQL[ 7DPSD 7ROHGR

x , Z' /Z KK> Z^

www.Act tiveRadiator.com

$1,5000 down no payments. no interrest. for 6 months.

= Ø ÁÈØ È¼¯Â ãʌ ©Èʒd d­ ­çÂ Ø Ø ¹ʒ ÈÁʘʘ ©ɷɶɸɷ

THU UNDE ER CREEK Mobilee fUEL & SER ERVICE EQUIPMENT

¼¼ çÜ ãʌ ɾɼɼʒɻɹɻʒɽɼɼɽ

Üö (¯Â  ¯Â©ʌ ˚ɷʍɻɶɶ ÈôÂ Õ öÁ Âã Ü È ÈçØ ¸È ܯã Ø ööʍʍ ɼɿɶʣ© ¼¼È Bç¼ã¯ʣdd ¹ ddØØ ¯¼ Ø Â Õ ã Âã ɷɶɶʣ© ¼¼ÈÂʍ ɸʣ¯Âʣɷ ( ÜöÜã Áʒ ]ç ¸ ã ãÈ ÕÕØÈó ¼ʒ Offer valid until Dec. 31, 20211.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 7

#92948 | 2017 BOMAG BW138AC-5, 1200 HOURS ....................................................$39,500

#93032 | 2007 KOMATSU CK30, CAB/AC | 2525 HOURS ....................................................$27,500

#93013 | 2013 TAKEUCHI TL12, CAB/AC | 2805 HOURS ..................................................$36,500

#2021001DM | 2015 KOMATSU D39PX-23, 2400 HOURS ....................................................$85,000

#C003JM | CAT 963C, CAB/AC | GP BUCKET | 7100 HOURS ..........................................$99,500

#92729 | 2012 KOMATSU WA380-7, JRB QC. 4000 HOURS ........................................$127,000

#83398 | 2014 KOMATSU PC210LC-10, QC | 4200 HOURS ........................................$104,500

#82380 | 2009 KOMATSU PC220 LONG FRONT, 5950 HOURS ........................................$129,500

#92930 | 2011 KOMATSU D51PX-22, 6 WAY BLADE | 3200 HOURS ..........................$127,500

#92145 | 2006 KOMATSU PC300LC-7E0, JRB QC, #92926 | 2013 KOMATSU PC490LC-10, 8750 6900 HOURS ..........................................$69,500 HOURS | AUX HYD | QC ......................$109,000

#93009 | 2015 KOMATSU PC240LC-10, 7,750 HOURS, QC ............................................$79,500

#80768 | KOMATSU PC300LC-7 LONG FRONT, 7400 HOURS ..........................................$99,000

#92180 | 2012 KOMATSU D65EX-17, RIPPER | SIGMA BLADE | 4700 HOURS ..............$149,500

#92983 | 2013 KOMATSU D65WX-16, CAB/AC | RIPPER | SIGMA | 6700 HOURS ............$94,500

#C2021004BMG | 2005 KOMATSU D65EX-15, 13,399 HOURS | NEW ENGINE 11,000 HOURS .... ................................................................$55,000

Page 8 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

U.S. Nuclear Repository Completes Key Mining Project After seven years of mining, federal officials said work to carve out the eighth disposal area at the U.S. government’s underground nuclear waste repository is complete.

Managers at the Waste Isolation Pilot Plant are planning to use the space beginning next year.

Workers still need to run power to the excavated area known as Panel 8 and install air monitors and chain link to protect the walls.

Constructed in a deep layer of salt in southern New Mexico, the repository entombs the radioactive remnants of decades of nuclear research and bomb-making. That includes special boxes and barrels packed with lab coats, rubber gloves, tools and debris contaminated with plutonium and other radioactive elements.

Having enough space for the waste became more of an issue in 2014, when a radiation release contaminated parts of the underground facility and forced an expensive, nearly three-year closure. Some parts of the repository

Constructed in a deep layer of salt in southern New Mexico, the repository entombs the radioactive remnants of decades of nuclear research and bomb-making.

became off-limits. The incident also delayed the federal government's cleanup program and prompted policy changes at national laboratories and defense-related

sites across the U.S. State regulators currently are weighing a permit change that some critics say could open the door to expanded operations at the

repository. A decision is expected later this year.

The repository has been in operation for more than two decades, having received nearly 13,000

shipments. The idea is that the shifting salt will eventually encapsulate the waste after the underground vaults are filled and sealed.

Reinhard Knerr, a manager of the Department of Energy’s Carlsbad Field Office, said the completion of Panel 8 was a long time coming but that it will be ready just in time. Panel 7 is expected to be full by April.

The rooms that make up Panel 8 are 300 ft long, 33 ft. wide, and 15 ft. high. Officials said laser measuring devices were used to guide the mining machines that cut the salt and large trucks were used to take the material to a hoist for transport to the surface.

Officials said more than 157,000 tons of salt were mined during the project.

The next project for the mining machines will be carving out drifts, or passageways, that will connect with a utility shaft that's under construction. 

Transportation Commission Approves New $7.7B Plan A state commission gave the green light to the Oklahoma Department of Transportation’s new $7.7 billion, eight-year construction plan.

The plan is updated annually and the new one covering through federal fiscal year 2029 covers approximately 300 more projects and $1.6 billion more than the previous one.

The work plan represents a nearly 50-50 split of state and federal funding for work through federal fiscal year 2029.

State Transportation Secretary Tim Gatz said he’s confident Congress will pass a federal highway funding bill soon, despite disagreement on a broader infrastructure package.

“I feel like the federal funding projections we have uti-

lized are certainly in line with what would be expected in our long-term reauthorization, but that's where it all begins.,” Gatz said. “Setting those funding projections is first and foremost as we begin to consider the critical needs across the state.”

Some of the critical needs in the new eight-year plan include repairs for nearly 700 bridges and safety improvements on nearly 1,000 mi. of rural, two-lane roads.

“Those are the types of highways that we have our most severe and highest fatality rates on, and something as simple as putting a safety shoulder on those highways can prevent some of those accidents from happening,” said Gatz.

Some of the critical needs in the new eight-year plan include repairs for approximately 700 bridges and safety improvements on 1,000 mi. of rural, two-lane roads.

Transportation Commissioner James Grimsley said he’s a big supporter of the work plans, which have been around since 2003.

“My district borders north Texas, and that continued growth is spilling over and it’s starting to have an impact on our road systems,” Grimsley said. “You know, our traffic continually increases. And so, I don't see any other way that we're going to be able to address that unless we do it systematically.”

The new work plan has Tulsa County in line for several big projects in federal fiscal year 29, including resurfacing on U.S. 75 and State Highway 11. 

The work plan represents a nearly 50-50 split of state and federal funding for work through federal fiscal year 2029.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 9

DISCOVER THE

YANMAR

GENUINE PARTS & SERVICE

ADVANTAGE YANMAR GENUINE PARTS are the only parts manufactured to YANMAR’s strict, leading standards in quality and durability, ensuring your machine continues to work as hard as you do. Contact us now to learn more!

DISCOVER YANMAR EXCAVATORS AT YOUR LOCAL DEALER: AGROLAND EQUIPMENT & SUPPLIES

GLACIER SUPPLY LAND & AG

www.agrolandeands.com Texas

www.glaciersupply.com Montana

512-291-3364

ASAP EQUIPMENT www.asapequip.com Texas

IDAHO IMPLEMENT 979-690-1106

B-C EQUIPMENT SALES www.bcequipment.com Texas

254-855-6242

707-463-1057

DITCH WITCH OF OKLAHOMA AND ARKANSAS www.ditchwitchok.com Oklahoma, Arkansas

405-348-4633

DITCH WITCH SOUTHWEST www.ditchwitchsouthwest.com Texas

www.kellyattachments.com Texas

www.raseq.com Utah www.rgwequipment.com California

936-294-0282

409-948-4497

www.riverbendeq.com Colorado

www.meridianutilityequipmentsales.com 916-880-5776

ROMCO

California

www.romco.com Texas

www.fredraderhawaii.com Hawaii

DITCH WITCH UNDERCON

PACWEST MACHINERY

www.dwundercon.com 800-582-1989 Texas, Kansas, Nebraska, South Dakota

www.pacwestmachinery.com Washington, Oregon

808-836-0881

775-235-4069

www.sherlockequipment.com Washington

360-689-2208

TIME RENTAL 801-972-5588

www.timerentalmt.com Montana

406-543-7136

VAN’S EQUIPMENT RENTAL & SALES 925- 606-2450

970-717-6062

ROCKY MOUNTAIN EQUIPMENT AND RENTAL www.rmerentals.com Wyoming

MERIDIAN

www.shaferequipmentco.com Nevada, Idaho

SHERLOCK EQUIPMENT SALES-RENTAL 575-769-8659

RIVERBEND SALES RENTALS PARTS SERVICE

MPS DISTRIBUTION HAWAII 432-617-8351

www.rsindinc.com New Mexico

RGW EQUIPMENT 210-932-9943

MAINLAND TOOL www.mainlandtool.com Texas

SHAFER EQUIPMENT COMPANY 541-884-0114

RASMUSSEN EQUIPMENT CO 559-733-2982

LONESTAR OUTDOOR POWER EQUIPMENT www.lonestaroutdoorpower.com Texas

DEFATTE EQUIPMENT RENTAL www.defatteequipment.com California

www.kaweahequipment.com California

www.powerpacrentals.com Oregon

R&S INDUSTRIES, INC 208-265-0415

KELLY ATTACHMENTS 800-956-6287

CONSTRUCTION EDGE EQUIPMENT www.construction-edge.com Texas

www.idahoimplement.com Idaho

KAWEAH EQUIPMENT CO 888-874-3940

CLAIREMONT EQUIPMENT www.clairemontequipment.com California

POWER PAC RENTAL & SALES 406-471-4791

307-684-2130

512- 388-2529

www.vansequipmentco.com Washington

360-755-0399

VERMEER SOUTHWEST www.vermeersouthwest.com Arizona

844-830-4193

VERMEER TEXAS-LOUISIANA www.vermeertexas.com Texas, Louisiana

866-898-3763

VOLVO CONSTRUCTION EQUIPMENT & SERVICES www.vcesvolvo.com California

951-277-7620

ROWE’S TRACTOR www.rowestractor.com Washington

509-886-3200

206-763-5933

© 2021 Yanmar America Corporation. YANMAR has a corporate policy of continuous product improvement and development; therefore data, specifications, and warranty are subject to change without any advance notice.

There may be differences between the specifications and illustrations contained in this publication and the actual equipment. Equipment components produced by other manufacturers may be shown in photographs in this publication for the purpose of illustration only and is not intended as an endorsement of that particular equipment or its suitability. Inspect equipment before using it and be sure it is operating properly. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manual. Before operating a machine, read, understand, and follow all instructions of the manual and on the machine. YANMAR disclaims all representations, express or implied, or any liability from the use of this publication.

Page 10 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 11

MADE FO OR

AMERIC CA SERVIC CE THAT’S TS

LOCAL L SCHEDULE A DEMO O

TODAY Y WITH A LOCAL DEA ALER

sanyamerica ccom sanyamerica.com ©2021 SANY America, Inc.

Award Winning

SW405K

Page 12 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hitachi Debuts Grade Control Tech Options for Excavators Hitachi Construction & Mining Division, an operating division of John Deere Construction & Forestry Company, rolled out options for its grade control technology, on select excavators, including 2D Grade Control and Solution Linkage 3D Grade Control, which allow an operator to set a grade and hold it.

The new factory-integrated technology increases efficiency while also lowering daily operating costs by enabling operators to spend less time getting the grade right the first time.

“We gave a sneak peek of Hitachi’s grade control technology at ConExpo-Con/AGG last year,” said Justin Steger, solutions marketing manager, site development & underground, Hitachi Construction & Mining Division.

“It’s thrilling to share this solution with our customers for increased efficiency. We know grade management technology is the future of the excavator industry, and Solution Linkage 3D Grade Control offers efficiency for your crew and provides factory-integrated we’re glad to provide a variety of precision — backed by Hitachi dealers, ready to work on day one. options for our customers.”

With Hitachi’s grade control the grade can now be assigned upgraded to 3D Grade Control, ture, the new grade control techtechnology, the machine controls elsewhere on the work site. through Hitachi excavator dealers. nology also lowers the likelihood the boom and bucket as the opera“Our 2D Grade Control and of over-excavation by preventing Solution Linkage 3D Grade tor handles the arm. This is espe- Control with Global Navigation Solution Linkage 3D Grade the machine from digging past a cially useful as it reduces the need Satellite System (GNSS) controls Control unite advanced grade tech- defined surface or depth. With the for multiple passes to achieve the position and elevation with respect nology with the smooth hydraulics prevention of over digging, operacorrect grade. Likewise, less expe- to a global reference while the 2D and fast cycle times of Hitachi tors can finish jobs more quickly, rienced operators are able to Grade Control manages the eleva- excavators,” Steger said. “It saves reduce material cost and save fuel achieve the correct grade more tion of the cutting edge in relation time and helps make good opera- costs, too, according to the manuefficiently while a crew member to a benchmark. The 2D Grade tors great.” facturer. who previously had to check for Control technology also can be With an over-dig protection feaThe Virtual Front feature

With Hitachi Solution Linkage 3D Grade Control, the machine controls the boom and bucket as the operator handles the arm.

hydraulically limits and automatically stops the bucket cutting edge from contacting the front of the machine at a selectable distance.

Additionally, operators can set virtual boundaries helping prevent damage when working around jobsite obstacles. Virtual Ceiling, Virtual Floor, Virtual Swing and Virtual Wall features provide visual and audible alerts to the operator as the machine approaches an adjustable set point, allowing operators to focus on productivity.

Hitachi offers customers four options for grade management technology: 2D grade guidance, 3D grade guidance, 2D grade control and Solution Linkage 3D grade control. Hitachi’s integrated grade management technology arrives ready to work due to factory installation and calibration. The systems also are fully supported by Hitachi excavator dealers.

Machine integration helps ensure that key components such as sensors and harnesses are protected — increasing uptime.

System data from all options works with ZXLink for analysis, so the machine’s health can be monitored to keep projects on track.

Hitachi grade management technology is available on the ZX210-6, ZX210LC-6 and ZX350LC-6 in the United States and Canada.

For more information, visit www.HitachiConstruction.com. 

The grade management systems are fully integrated from the monitor in the cab to the components on the machine. Wire harnesses are thoughtfully routed and sensors are covered and protected from damage.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 13

W E KEEP WE KEEP AM A MER M RIC A ON O N TRACK T R AC K

Call: 800-365-7260 -7260 Visit: morookacarrriers.com

Page 14 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Volvo Expands Material Handler Line With New Models Volvo Construction Equipment has launched the all-new EW200E material handler, aimed at the light waste handling segment. Its bigger brother — the EW240E material handler — is updated with a longer boom.

“A dedicated material handler is purposebuilt for these applications, compared with modifying an excavator to fit into these segments,” said Matthew McLean, product manager, excavators, Volvo CE. “Now we’ve added a second machine to our lineup with the EW200E MH, which is perfect for light and medium material handling like plastic, household waste and scrap.”

Engineered for Durability, Productivity The EW200E material handler weighs 22.6 tons and is powered by a Volvo D6J 6L Tier IV final engine that provides 173 hp (129 kW). The machine has three boom and arm configurations. The straight boom can be fitted with either a 13-ft. gooseneck arm or an 11-ft. 6-in. sorting arm, giving the EW200E a max reach of 33 ft. and a max lifting capacity of 25,600 lbs.

The 26-ton EW240E material handler, introduced in 2018 for medium-duty applications, now has a 23-ft. 9-in. straight boom, which is more than 2 ft. longer than the previous model. When combined with the exist-

Volvo’s EW200E material handler is aimed at the light-waste handling segment.

ing 16-ft. 5-in. gooseneck arm, the new total reach is more than 39 ft.

Additional Features The EW200E MH shares many components with the EW240E MH and other Volvo wheeled excavators.

Hydraulics matched to the Volvo engine allows the machines to find the sweet spot between engine speed and hydraulic efficiency. The boom float function and boom cylinder dampening minimize vibration and

hold the grapple in place for increased stability. The grapple control and soft swing system work together for instantaneous response and smooth precision In addition, Volvo material handlers offer application-specific features to increase productivity, uptime and operator comfort: • Option of four stabilizers (front blade and rear outrigger as standard) • Cab can be raised more than 16 ft. above the ground • Cab has double-damped mounts to

reduce noise and vibration • Outriggers, blade and cab-raising functions can be completed without removing hands from joysticks • Factory-installed auxiliary circuits enable sorting grabs and orange-peel grapples • Adjustable arm-in and height limitations • Comfort Drive Control provides the ability to drive up to 12 mph using the roller on the joystick • Can be ordered without the steering column, which allows the operator to control the machine using only the joysticks • Auto idle and auto engine shutdown to help to reduce fuel consumption • Optional solid rubber tires • Optional waste package: protective screens and a reversible fan • Optional Smart View feature for bird’s eye view of machine The EW200E MH and EW240E MH are eligible for a free year of ActiveCare Direct, the Volvo telematics service that provides 24/7/365 machine monitoring and fleet utilization reporting directly from Volvo. They also are backed by the Volvo Lifetime Frame and Structure Warranty, which covers the frame, boom and arm for the entirety of the initial ownership period.

For more information, visit volvoce.com/na. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 15

­

PLEASE CONTACT YOUR LOCAL DEALER: ALASKA

OKLAHOMA

SMS EQUIPMENT INC.: NPK NEW DEALER Anchorage: 907-275-3300

KIRBY-SMITH MACHINERY, INC.: HONNEN EQUIPMENT: McAlester: 918-310-1550 • Oklahoma City: 405-495-7820 Salt Lake City: 801-262-7441 • St. George: 435-652-8003 Tulsa: 918-438-1700 West Haven (Ogden): 801-627-0049

ARIZONA ROAD MACHINERY LLC: Phoenix: 602-252-7121 • Prescott: 928-778-5621 Tucson: 520-623-8681

CALIFORNIA ROAD MACHINERY LLC: Bakersfield: 661-695-4830 • Fresno: 559-834-3149 Mojave: 661-824-2319 • Perris: 909-355-3600 Pico Rivera: 562-699-6767 • Redding: 530-229-3820 Sacramento: 916-375-3540 • Santa Rosa: 707-544-4147

UTAH

OREGON

WASHINGTON

TRIAD MACHINERY: NPK NEW DEALER Portland: 503-254-5100 • Eugene: 541-342-7700 Bend/Prineville: 541-447-5293

TRIAD MACHINERY: NPK NEW DEALER Seattle/Tacoma: 253-722-5560 Spokane: 509-534-1900 • Mount Vernon: 360-488-3948

TEXAS

WYOMING

KIRBY-SMITH MACHINERY, INC.: HONNEN EQUIPMENT: Abilene: 325-692-6334 • Amarillo: 806-373-2826 Cheyenne: 307-316-9800 • Gillette: 307-685-4288 Dallas: 214-371-7777 • Ft. Worth: 817-378-0600 Mills (Casper): 307-266-4474 • Rock Springs: 307-382-5284 Hewitt: 254-261-1370 • Lubbock: 806-745-2112 Odessa: 432-333-7000 COLORADO WAUKESHA-PEARCE INDUSTRIES, LLC.: HONNEN EQUIPMENT: Buffalo: 903-322-7150 Commerce City (Denver): 303-287-7506 NEW DEALER Durango: 970-247-4460 • Grand Junction: 970-243-7090 Corpus Christi: 361-884-8275 • Edinburg: 956-386-0107 Houston: 713-723-1050 • Kilgore: 903-984-2011 IDAHO Pflugerville: 512-251-0013 • Port Arthur: 409-721-5305 HONNEN EQUIPMENT: San Antonio: 210-648-4444 • Tomball: 281-351-9016 Idaho Falls: 208-523-9915

NPK WELCOMES

SMS EQUIPMENT INC. ALASKA

NPK MANUFACTURES AND MARKETS THE GREATEST SELECTION OF: Hydraulic Hammers • Compactors • Sheet Pile Drivers • Concrete Crushers Material Processors • Demolition Shears • Demolition Grabs • Pedestal Breaker Systems

npkce.com

Page 16 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cat 816 Landfill Compactor Improves Uptime Reliability The new 816 compactor features improved airflow technology to reduce cleaning and maintenance. A new radial air filter lasts four times longer than the previous filter, and operators are alerted to airflow blockages by an electronic air inlet restriction indicator.

Building on a nearly 50-year legacy of delivering maximum compaction performance and rugged durability, the new Cat 816 landfill compactors features improved guarding and structure engineering to optimize uptime availability.

New grouping of service points reduces time spent on maintenance, while the compactor’s updated cab design increases operator comfort and productivity, according to the manufacturer.

Alleviating potential damage, new frame deflectors divert trash away from the frame and hood enclosure. A new captive hinge on the service doors prevents them from opening unintentionally to protect interior components from contamination. These new deflectors and doors ensure fewer failures resulting from the severe nature of landfill applications.

Up to 12 Percent Lower Maintenance The new 816 compactor features improved airflow technology to reduce cleaning and maintenance. A new radial air filter lasts four times longer than the previous filter, and operators are alerted to airflow blockages by an electronic air inlet restric-

tion indicator. A screened air inlet deflects trash from entering the radiator area to help maintain proper airflow, while an autoreversing fan with manual activation capability purges debris buildup.

Sight gauges for the coolant, transmission oil and hydraulic system provide quick inspection with reduced contamination risk.

Grouped hydraulic oil, cooler, fuel cooler and condenser service points, along with centralized grease points, help to further minimize maintenance time. Access to the emergency shutdown, battery disconnect and jump start are quickly and conveniently accessed from ground level.

The heavy-duty main structures of the new 816 are built to be rebuilt, offering multiple life cycles. Reusing and rebuilding machine components offers significant savings compared to the cost of buying new and helps to lower total cost of ownership.

Advancing Operator Productivity The compactor’s cab delivers greater comfort and easier machine control for higher operator productivity. Machine controls include membrane switch panels, keyed ignition and electrohydraulic parking brake control switch to increase efficiency.

Updates to the single Cat STIC system allow for shorter, faster cycles to reduce operator fatigue and increase performance. The STIC system combines steering, gear selection and other functions into a single lever.

The cab sits on isolation mounts and features a new Premium Plus seat with leather finish, forced air heating and cooling, twoway thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening for total comfort throughout the workday. Pressurized to lower interior sounds levels and keep contamination and odors out, the cab features an automatic climate control system that maintains the operator’s preferred temperature settings.

Operators are kept informed about machine operating conditions via a 3G touchscreen with user-friendly interface for viewing the Vital Information Management System (VIMS) to optimize machine uptime. Fleet management is further improved through Cat Link technology that provides online access through VisionLink to critical machine data such as machine location, hours, fuel consumption, idle time and diagnostic codes.

Cat Compact saves on fuel and machine wear and allows the operator to achieve

higher compaction densities through in-cab guidance, machine position reporting and completed pass count. The machine’s standard review camera elevates safety for operators and workers onsite.

Proven, Efficient Powertrain The new purpose-built Cat 816 landfill compactor is powered by the Cat C7.1 engine designed for maximum fuel economy and increased power density. Two engine package options are available — U.S. EPA Tier IV Final/EU Stage V and Tier III/Stage IIIA equivalent — for meeting local market emission standard requirements. Its Advanced Productivity Electronic Control System (APECS) transmission control delivers improved shifting performance, achieves greater momentum on grades and saves on fuel by carrying that momentum through shift points.

Designed specifically for Cat compactors, Paddle and Plus wheel tips deliver high compaction performance and traction. Striker bars and available cleaner fingers help to keep wheels free of debris, so compaction is more efficient and yields higher densities.

For more information, visit www.cat.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 17

Page 18 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

7TFI <NIJSJWX

2FYJWNFQ 9WFSXKJW ;JMNHQJX

10’ Commercial Pavers ѣ (TRRJWNHFQ 5F[JWX

<NYM T[JW ^JFWX TK J]UJWNJSHJ \J XUJHNFQN_J NS GZ^NSL FSI XJQQNSL ZXJI FXUMFQY UF[NSL JVZNURJSY

8’ Commercial Pavers ѣ (TRRJWNHFQ 5F[JWX

9FSIJR ;NGWFYTW^ 7TQQJWX

WEPIW$GEPZMRKVSYTMRG GSQ \\\ HFQ[NSLWTZUNSH HTR

&XUMFQY )NXYWNGZYTWX

(MNU 8UWJFIJWX

2NQQNSL 2FHMNSJX

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 19

WE HAVE YOUR NEXT OFF ROAD TRUCK Niece 8,000 gallon water tanks

installed on 40 ton Articulated Off Highway chassis. This combination is the workhorse of the dust control and water needs for quarries and large construction sites

NWT9500

The NWT9500 950 Gallon water tank mounted on articulated truck. Pictured: Deere 460E with 9,500 gallon tank. Tanks come with 6X5 pumps.

NFL3000

The NFL3000 Off Road, Fuel and Lube Bed offers 3,000 gallons of diesel fuel.

NFL10000

The NFL10000 Fuel & Lube Can be mounted on any 100,000 lb rigid frame truck.

Holds 10,000 gallons of diesel. 5 additional fluid tanks. Holds up to 3,000 gallons of oil.

Page 20 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.trophytractor.com Agricultural Tractors

Crawler Loaders

Off-Highway Trucks

Winch

2015 JOHN DEERE 6215R ..........................................................$139,500 (4) 2018/19 JOHN DEERE 6120M ......................................From $79,500 2018 JOHN DEERE 5125R..............................................................$98,500 (2) 2017 JOHN DEERE 5085M ............................................From $59,500

(2) 2017-19 CATERPILLAR 963K......................................From $265,000

(3) 2009-2010 CATERPILLAR 785D................................................$CALL (2) 1995 CATERPILLAR 777C ........................................................$59,500

PACCAR PA110VS245 ......................................................................$7,500

Motor Graders

2013 CATERPILLAR 740B ......................................................................$329,500 (4) 2014-15 CATERPILLAR 725C................................................From $249,500 2017 CATERPILLAR 725C2 ....................................................................$339,500 2019 FORD F750 ..........................................................................................$95,000 (2) 2007/15 FREIGHTLINER M2 ..................................................From $49,500 (18) 2018-20 KENWORTH T370 ..........................................From $89,500 (16) 2018-21 PETERBILT 348 ............................................From $119,500 VOLVO A25D ..................................................................................$119,500

Artic Trucks (2) 2016 CATERPILLAR 745C ..............................................$309,500 Ea. (2) 2019 CATERPILLAR 745 ..................................................$465,000 Ea. (5) 2016-2019 CATERPILLAR 725C2 ..............................From $199,500 (2) 2014-15 CATERPILLAR 725C..........................................$189,500 Ea.

Compactors - Padfoot/Smooth Drum 2020 CATERPILLAR 815K ..............................................................$CALL 2007 CATERPILLAR 815F 2 ............................................................$CALL (4) 2013-17 CATERPILLAR CS66B ..................................From $129,500 (6) 2013-18 CATERPILLAR CP56B ..................................From $129,500 (4) 2017/18 CATERPILLAR CS56B ....................................From $64,500 2016 BOMAG VW177D-5 ................................................................$58,195 2019 HAMM H7IP..............................................................................$69,500

Crawler Carriers (2) 2017-2019 CATERPILLAR 963K..................................From $265,000 2019 MOROOKA MST4000VD ....................................................$319,500 (2) 2018 MOROOKA MST3000VD ....................................From $229,500 (4) 2018/19 MOROOKA MST2200VD ..............................From $179,500 (2) 2019 MOROOKA MST1500VD ....................................From $149,500 MOROOKA MST660VD ..................................................................$89,500

Dozers - Crawler 2012 CATERPILLAR D11T ..............................................................$CALL 2017 CATERPILLAR D10T2, 3456 Hrs ......................................$995,000 2011 CATERPILLAR D10T, 11,778 Hrs ......................................$575,000 2018 CATERPILLAR D9T..............................................................$805,000 (3) 2018 CATERPILLAR D8T ............................................From $510,000 2004 CATERPILLAR D8R II ..........................................................$125,000 2020 CATERPILLAR D6 XL..............................................................$CALL (5) 2019/20 CATERPILLAR D6 LGP ................................From $425,000 (4) 2014-19 CATERPILLAR D6T XW ................................From $159,500 2015 CATERPILLAR D6N XL, 3235 Hrs ....................................$164,500 2016 CATERPILLAR D6N LGP ....................................................$139,500 2018 CATERPILLAR D6K 2XL ....................................................$185,000 2012 CATERPILLAR D6K XL ..........................................................$CALL

Dozers - Wheel 2015 CATERPILLAR 834K............................................................$285,000

Excavators - Crawlers 2017 CATERPILLAR 390FL..........................................................$479,500 2015 CATERPILLAR 374FL..........................................................$395,000 (2) 2017/21 CATERPILLAR 349FL ....................................From $329,500 2019 CATERPILLAR 336 ..............................................................$289,500 2017 CATERPILLAR 336FL, 2941 Hrs........................................$215,000 2014 CATERPILLAR 329EL, 4134 Hrs........................................$159,500 2015 CATERPILLAR 323FL..........................................................$132,500 (2) 2018/19 CATERPILLAR 320 ........................................From $179,500 2017 CATERPILLAR 316FL..........................................................$169,500 (2) 2019 CATERPILLAR 313FL ....................................................$139,500

2020 CATERPILLAR 150AWD......................................................$407,500 (2) 2017-19 CATERPILLAR 140M3 ................................................$CALL 2014 CATERPILLAR 140M2 VHP....................................................$CALL 2019 CATERPILLAR 16M3 ..........................................................$825,000 2016 CATERPILLAR 14M VHP ....................................................$405,000 2007 CATERPILLAR 14H..............................................................$155,000

Water Equipment - Trucks

Scrapers

Wheel Loaders

1993 CATERPILLAR 637EII ..........................................................$139,500 1980 CATERPILLAR 637D..............................................................$59,500 2000 CATERPILLAR 627F................................................................$CALL

1991 CATERPILLAR 992C ..............................................................$CALL 2019 CATERPILLAR 982M ..........................................................$439,500 (2) 2018/2019 CATERPILLAR 966M ............................................$318,500 (2) 2018 CATERPILLAR 938M......................................................$169,500 2015 CATERPILLAR 914K..............................................................$69,500

Skid Steers - Track (8) 2020-21 JOHN DEERE 333G......................................................$CALL 2014 CATERPILLAR 299D XHP ....................................................$45,000 (3) 2020 CATERPILLAR 299D3 XPS ..............................................$CALL (3) 2021 CATERPILLAR 299D3 ......................................................$CALL (6) 2014-18 CATERPILLAR 299D2 XPS ............................From $49,500 2014 CATERPILLAR 299D..............................................................$45,000 2016 CATERPILLAR 242D..............................................................$39,500 2016 CATERPILLAR 236D..............................................................$35,500

Miscelleneous Equipment 2021 ROME TRCW16 ........................................................................$CALL 2018 ROME TRCW12 ......................................................................$48,500 2019 ROME TACW16........................................................................$36,000 2018 ROME TCW28..........................................................................$19,750 2018 ROME TCW32..........................................................................$23,000

Authorized dealer for

Water Equipment - Tower/Tanks (5) 2020/21 Klein KPT-120 Water Towers ..........................From $54,500

Prinoth Unveils Next Generation Panther Rotating Dumper

Prinoth unveiled the next generation of the Panther T14R crawler carrier. Prinoth has increased the Panther’s speed and power, while adding a host of new features designed to boost uptime and operator performance.

safer for everyone on the job site, while increasing the operator confidence and, in turn, productivity.

Unrestricted cab views will provide safety for operators and other workers. Accidents can seriously impact productivity, and safety innovations are an important way to prevent them.

Move More, Faster The next-generation builds upon Producing New Benefits the speed/payload combination of the for Operators Panther T14R. A boost in speed of up The new T14R also provides operto 5 percent, coupled with the T14R’s ators with enhanced comfort and intupayload, further increases its producitive features that make easy work tivity. And, company officials say, it The T14R’s overall architecture was redesigned to during long shifts. For example, new demonstrates Prinoth’s commitment offer visibility gains, making it safer for everyone warning systems on the enhanced inthe job site, while increasing the operator confito providing the highest productivity on cab display allow operators to confidence and, in turn, productivity. levels for off-road construction projdently take on challenging conditions. also the best payload-to-weight ratio in the ects.

“We didn’t just make the machine more “Everyone knows that bigger payloads industry. With this next generation, we now efficient,” said Alessandro Ferrari, Prinoth and faster cycle times deliver more produc- offer a 15 percent advantage in this critical CEO. “The advancements found in this new tivity and bigger profits, and at Prinoth, category over our closest competitor by car- generation of Panther make operators more we’re dedicated to helping our customers get rying less dead weight.” efficient as well.” more for their investment,” said Patrick Direct Visibility, All-Around Safety Hébert, product manager of the Panther.

Technology Upgrades The T14R’s overall architecture was “That’s why we worked hard as a team to Prinoth engineers also carried out provide not only exceptional payload, but redesigned to offer visibility gains, making it upgrades inside of the Panther, including a

new engine and a first-of- its kind drivedirection reset. Without sacrificing power, the new generation of Panther vehicles is now driven by Cat’s double-label engine model C7.1 EPA Tier IV Final/EUROMOT Stage V, supporting Prinoth’s Clean Motion philosophy for sustainability.

Clean Motion is the company’s forwardthinking corporate philosophy synonymous not only with low energy consumption but also with environmental protection in ecologically sensitive areas.

Operators also will appreciate an exclusive single-touch drive-direction reset for effortless turnarounds and improved settings of the hydrostatic drive motor, which optimizes high travel speed and responsiveness under high-torque demand.

“Our engineers achieved what few thought possible,” said Ferrari. “They made the world’s fastest crawler carrier even faster. The safest carrier even safer. The easiest even easier. And the cleanest even cleaner. In other words, the best is now even better.”

For more information, visit www.prinoth.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 21

RENTALS

HEAVY EQUIPMENT

OEM-Fit offering ensures the proper match of excavator and machine control solution from Leica Geosystems, part of Hexagon, and simplifies the acquisition process with a single financing package.

Serving the Construction & Mining Industries Since 1962

Former Rental Units for Sale:

Case Introduces OEM-Fit 2D, 3DSolutions for Excavators Case Construction Equipment’s OEM-Fit 2D and 3D machine control solutions designed by Leica Geosystems, part of Hexagon, is now available for Case D Series excavators from Case SiteControl Certified dealers.

This new option ensures that the optimal combination of machine and solution is installed and tested by Case certified precision field specialists. It also simplifies the acquisition process and allows for the technology to be grouped in with the purchase of the machine — combining the financing or lease approval, rate and payment in a single package.

“It takes the guesswork out of what solution works best with each machine, and ensures that it is installed and tested by certified professionals before it’s delivered to the contractor,” said Nathaniel Waldschmidt, product manager, Case Construction Equipment.

“The excavator and the machine control system are optimally matched and calibrated — helping the owners and operators of each machine get up and running immediately upon delivery of the machine.”

OEM-Fit machine control solutions also

increase the residual/resale value of each excavator, confirming to buyers on the secondary market that the system is designed and proven to work with the machine.

“Machine control has the ability to transform the productivity, efficiency and longterm profitability of excavators,” said Waldschmidt. “We’re now making the addition of machine control with excavators completely turnkey, allowing contractors to experience those benefits in an extremely seamless experience with their Case SiteControl Certified dealer.”

Leica Geosystems’ machine control solutions offer several features that increase the productivity, accuracy and safety of excavators while providing operators an easy-touse hardware and software platform.

“We recognize the value of industry collaboration to provide contractors with accessible and easy-to-use technology,” said Magnus Thibblin, Leica Geosystems Machine Control president. “We are pleased to work with Case Construction Equipment to provide customers OEM-Fit machine control solutions on Case D Series excavators.”

For more information, visit CaseCE.com. 

2001 CAT 320CL, Ready to work, 24T HEX 1996 CAT 815F, Excellent, work ready 22 ton with reach boom, med stick, cab, AC, aux soil compactor with OROPS, S-Dozer w/ tilt, hyd. QC, 1000 hrs on new tracks ......$55,000 5200 hrs on rebuilt engine, 0hrs on newly rebuilt trans and 1200hrs on feet ....$149,000

2003 CAT D6R DS LGP, Excellent, series 2, LGP w/ cab, AC, 6S Dozer w/ tilt, drawbar, Almost new tracks w/ 50% 36" flat pads. Fully serviced and work ready ....................$79,000

1997 CAT D6R LGP, CAB, AC, 6S Dozer, 2003 CAT 330C, Work ready 40T HEX with DRAWBAR, 1200 hr on new UC w/ 36" FLAT reach boom, med stick, QC, GP Bucket, fully PADS, 2700 hr on engine rebuild. Runs great, serviced, Tier 2 engine ......................$69,000 former rental unit ..............................$65,000

2003 CAT 14H, Work ready, larger blade, fully equipped with cab, AC, pushblock, ripper, engine doors, 20.5-25 tires in good condition.

1 of 2 available ................................$149,000

1980 CAT 631D, 2000 hrs on CAT dealer re2012 TEREX TA300, Excellent, low hours, power 3408TA, T-2 engine, cab, AC, retarder, 30T 6x6 Artic with retarder, tailgate, backup 37.25x35 tires at 90%F, good rears. Excellent camera, supplemental steering, good tires.

Work ready. One of two available ....$139,500 ..........................................................$99,000

2011 DEERE 544K, LOW Hours, cab, AC, QC with GP Bucket and Forks, in excellent condition, work ready ................................$82,500

(714) 340-1025 • Mike Kustura: sales@EccoEquipment.com

www.eccoheavyequipment.com

Santa Ana, CA – HQ (714) 554-4851

Visalia, CA (559) 651-0116

San Diego, CA (619) 205-2026

Coachella, CA (760) 578-1043

Sacramento, CA (916) 997-7492

Bullhead City, AZ (928) 715-0672

Riverside, CA (951) 276-9025

Stockton, CA (510) 516-5567

Phoenix, AZ (602) 276-2040

Las Vegas, NV (702) 877-4302

Salt Lake City, UT (801) 796-7368

Boise, ID (208) 459-3800

Williston, ND (701) 572-8126

Page 22 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 23

LO OL = LOT LOTS OF LO L ADS

Highly versatile 4x4 forklifts by AUSA. Easily handle heavy load a s with a small turning rad a ius.

Explore the full range of AUSA products at diamondaequipment.com.

7 locations in Southern California & Southern Nevada

Page 24 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 25

heavy equipment

Armor PROTECTION YOU CAN COUNT ON!

­

­

­

­

­

­

­

­

­

­

New Division Will Look at ‘Big Picture’ Construction The Oklahoma Department of Transportation is in the middle of a process to consolidate some of the functions it shares with the state turnpike authority and aeronautics commission, and ODOT is making some internal changes as well.

ODOT has a new multimodal division that will look at the big picture of surface transportation.

Multimodal Division Manager Jared Schwennesen updated the agency’s Waterways Advisory Board on the division.

He said they’ll look at how trains, boats, buses and even bikes and scooters can work together to improve transportation for everyone from commuters to businesses looking to move products.

“If we can get more rails onto boats, we decrease blocked crossings,” Schwennesen said. “If we get more rail moving throughout the world, then we get less congestion on highways, and then we get less accidents with pedestrians. And it’s just a better, holistic view of transportation.”

Schwennesen said one of the goals is making a stronger case for non-highway forms of transportation.

“We need more money, we need more maintenance activities to happen, we need more grants from the feds, and how can we all do that together instead of fighting against each other?” Schwennesen said. “Let’s try to help grow this pie and have a better advocacy voice at the capitol, along with within ODOT and our other transportation partners.”

The multimodal division will not deal with aviation-related issues. 

Page 26 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Manhattan Builds World’s Largest Single-Panel Moving Roof

By Joel Lambert

CEG CORRESPONDENT

The Manhattan Construction Company recently received a highly respected award for its work on a massive undertaking in Texas.

On Sept. 22, Bob Lanham, president of Associated General Contractors, handed out the Build America Award to Manhattan for the category of Construction Management New or Renovation $100 million or more, recognizing the construction company for its construction of Globe Life Field, home of Major League Baseball’s Texas Rangers.

The distinction recognizes the current standard of excellence for time, cost, safety and quality, while accounting for environmental impact. Manhattan built the new 40,300-seat stadium in a little over 30 months at cost of approximately $1.1 billion.

Construction Details The operable roof comprises one of the distinguishing features of the sports complex. At approximately 5.5 acres, it is the largest single-panel moving roof in the world, according to the Fort Worth Business Press. In approximately 15 minutes, 10 motors convey a steel structure covered in ethylene tetrafluoroethylene (ETFE) — a light-weight, heat resistant film originally developed for aerospace applications — along rails similar to those on which trains roll. Ten steel trusses, weighing an average of 500 tons each, support the immense panel.

W&W Steel Erectors installed the first truss during February 2019, and the completed roof closed for the first time by December of that year. To accomplish this endeavor, the construction team hoisted a total of 19,000 tons of steel to heights exceeding 230 ft.

One hundred and fifty trucks bearing a modern-day mammoth arrived during December 2018 to facilitate the monumental undertaking; the Manitowoc 31000 is the largest American-made crawler crane, able to lift up to 1,100 tons as high as 361 ft. from its base.

“The 31,000 takes up a lot of space and requires a lot of coordination with not only W&W but with all trade partners to keep progress moving forward,” said Manhattan Construction Company Vice President Jim Cuddihee.

“The erection of the crane and the 150 trucks required was highly coordinated, not only on-site, but we also arranged for the city to provide police escorts for the truck transport of the crane parts to the ballpark,” Cuddihee added.

The team took two weeks to assemble the crane; and planning to dismantle it took place from the beginning.

“We only had a couple of feet to play with

The distinction recognizes the current standard of excellence for time, cost, safety and quality, while accounting for environmental impact.

when the structure was complete,” Cuddihee said.

Roof construction started on the west end.

The construction team assembled large sections of the steel structures in the stadium bowl — 50 ft. below street level — one of the truss pieces exceeding 700 tons.

Describing the process, Cuddihee said, “Each of the roof's five truss pairs were erected in three sections: north, middle and south sections. After one truss was completely erected, we slid down the rail to the west to set the next truss. Once the first and second truss pairs were erected entirely, they were tied together with more steel.”

To prevent the venture from devolving into a frenetic pandemonium, the team employed drones. The DJI Phantom 4 Pro tracked the progress of production and assisted with the logistics of equipment and materials on an extraordinarily tight site.

“During the project’s construction, the ballpark’s foundations, the bowl structure and the roof structure were being built simultaneously in different phases,” said Cuddihee. “To keep up with the tight schedule, crews picked and set the trusses and maneuvered around the stadium bowl full of steel beams, cranes, and workers from various trade. Drone images were used in trade partner meetings to plan and coordinate activities in the coming days and weeks.”

Award Recognition As for the prestige of the Build America award, it emanates from the story of AGC’s origins. The organization formed in 1919 in response to a call from U.S. President Woodrow Wilson for leading construction companies to form an organization to

address the problem of mobilizing on the scale required to win World War I. According to a 2011 U.S. Builder’s Review report, “AGC is today the oldest and largest national construction trade association in the United States,” with more than 32,000 members — 7,000 of which are leading general contractors.

AGC consistently describes the Build America awards as the “Oscars” of the construction industry. The organization’s website states that the award-winners are chosen by its members to “have demonstrated the very best when it comes to building a better America and improving our quality of life,” and echoes 2009 President J. Doug Pruit’s sentiment, “These projects, with their vision, scope and grandeur literally dare to challenge, dare to change.”

Past commensurate winners include a joint venture by Holder, Hunt, Russell and Moody in 2018 for the Mercedes-Benz Stadium in Atlanta, Ga. — a 72,000 to 80,000 seat stadium for National Football see MANHATTAN page 48

AGC Award Winners in Western U.S. Contractor: Balfour Beatty Category: Building New (Under $10M) Project: Heart of LA Performing Arts Building Location: Los Angeles, Calif.

Contractor: Dick Anderson Construction Category: Building Renovation (Under $10M) Project: Sperry Chalet Restoration, Phase 2 Location: West Glacier, Mont.

Contractor: Willmeng Construction Category: Building New ($76M to $125M) Project: Northrop Grumman Innovation Systems’ Launch Vehicle Div. HQ Location: Chandler, Ariz.

Contractor: Hawaiian Dredging Construction Company Inc. Category: Building Renovation ($76M to $125M) Project: Mauna Lani – Auberge Resorts Collection Location: Kamuela, Hawaii Contractor: Lease Crutcher Lewis Category: Building New or Renovation ($126M or more) Project: Building Cure Location: Seattle, Wash.

Contractor: Linbeck Group LLC Category: Construction Management New (Under $99M) Project: Brockman Hall for Opera Location: Seattle, Wash.

Contractor: Skiles Group Category: Construction Management Renovation ($99M) Project: Methodist Richardson Medical Center Vertical Expansion & Parking Garage Location: Richardson, Texas

Contractor: Mortensen Category: Design-Build Building Project: Allegiant Stadium Location: Las Vegas, Nev. Contractor: McCarthy Building Companies Inc. Category: Environmental Enhancement Project: State Highway 45 South Location: Autin, Texas Contractor: Sea Engineering Category: Federal & Heavy Renovation Project: Repair Damange to U.S.S. Arizona Location: Pearl City, Hawaii Contractor: Sundt Construction Category: Highway & Transportation New Project: Go-10 CD Lanes IH-10 Location: El Paso, Texas Contractor: Advanced American Construction Category: Highway & Transportation Renovation Project: Reconstruction of BNSF Bridge 66.4 Location: Cook, Wash.

Contractor: Myers & Sons Category: Highway & Transportation New (Under $10M) Project: Winding Way Bridge Replacement Location: Fair Oaks, Calif.

Contractor: Emmert International Category: Specialty Contractor Project: Record Setting Songs RPV Cask Transport Location: San Onofre, Calif.

Contractor: Granite Construction Category: Marvin M. Black Partnership Excellence Project: Caltrans CMGC SR99 Realignment Location: Fresno, Calif.

Paving

SECTION

Pages 27-41

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Volvo Adds Entry-Level Package for Compact Assist

Volvo Construction Equipment has redefined its Compact Assist offering for asphalt compactors with the launch of a new entry-level package.

As part of the company’s ongoing commitment to customer productivity, Volvo CE has introduced Compact Assist Start, a new introductory package of its Intelligent Compaction system, Compact Assist.

“If a customer hasn’t used Intelligent Compaction before, then Compact Assist Start is the perfect introduction for them,” said Mark Eckert, product manager, Volvo CE. “Giving their operators real-time information on pass and temperature mapping in a system that’s as easy to use as a smartphone, they’ll notice improvements in their crews’ productivity immediately.”

New Package Gets Back to Basics Whether it’s for mapping the road, estimating density or producing jobsite reports, Compact Assist is now available in three packages to match customer requirements.

Each package provides varying degrees of access to the core functions of pass mapping, temperature mapping and density/stiffness mapping. All three packages are powered by the Volvo Co-Pilot, a 10-in. in-cab tablet.

Compact Assist Start helps customers take the first step into Intelligent Compaction. Easy to use and with no setup required, the

entry-level package includes pass mapping and temperature mapping functionalities, providing the operator with real-time data about how the job is progressing.

Pass mapping gives operators a clear on-screen view of the roller’s coverage of the asphalt, highlighting stop points and overlaps so adjustments can be made quickly and efficiently without missing a spot.

Temperature mapping ensures that compaction is completed at the optimum pavement temperature. A color-coded map of surface temperatures and the ability to set the maximum/minimum range enables the operator to easily avoid

rolling with a mix temperature that is too hot or too cold.

Compact Assist Start is available on Volvo DD110C, DD120C, DD128C and DD140C asphalt compactors.

From Start to Finish Upgrading to the other two Compact Assist programs is easy, and Compact Assist Start comes with all of the wiring and most of the needed hardware. The next package level is Compact Assist, ideal for customers looking to record and track data across a job site. It provides greater accuracy and reporting opportunities through the addition of a high-

accuracy GPS antenna, recorded and saved job data, automatic job report creation with USB and overthe-air download.

The most comprehensive package is Compact Assist with Density Direct, giving customers complete control of the job site. It combines all the features of Compact Assist with the addition of density mapping functions.

While these packages were created for Volvo asphalt compactors, there is a Compact Assist system for Volvo soil compactors that includes pass mapping and compaction mapping.

For more information, visit volvoce.com. 

Page 28 • October 24, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Products shown with optional equipment.

MAULDIN Paving g Products... MASTERS S OF THE MA AT! T! Contact your MAULDIN N dealership today to see the newly redesigned 1860 Commercial Paver For more information visit us at www.4aMauldin.com.

Golden Equipment Company www.goldenequipment.com 721 Candelaria Rd NE 29268 Hwy 160 Albuquerque, NM 87107 Durango, CO 81303 (505) 345-7811 (970) 247-8830

1150 Madison Lane Farmington, NM 87401 (505) 326-1413

Closner Equipment www.closner.com 6532 East Highway 114 13800 FM 973 N Rhome, TX 76078 Manor, TX 78653 (817) 708-9108 (512) 272-8200

21910 FM 2252 Schertz, TX 78154 (210) 732-2131

Tri-State Truck & Equipment, Inc. 5250 Midland Rd. Billings, MT 59101 (406) 245-3188

www.tste.com 1271 N. Derrick Dr. Casper, WY 82604 (307) 472-1818

5024 Tri Hill Frontage Rd. Great Falls, MT 59404 (406) 452-9551 200 Floss Flats Rd. #1 Belgrade, MT 59714 (406) 388-5815

1319 Elk St. Rock Springs, WY 82901 (307) 362-4000

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2021 • Page 29

BUILT TO CONNECT

Efficiency and Productivity Designed with safety and operator comfort in mind, the Shuttle Buggy® SB-3000 material transfer vehicle features adaptive cruise control, bright LED lighting, four-wheel steering for easy transport and ground-level maintenance access for added convenience. Operators can rely on clear sightlines and the ground operator is safely protected inside the structure of the machine.

The Roadtec SB-3000 is the perfect blend of traditional craftsmanship and modern technology.

astecindustries.com ARIZONA/NEVADA/UTAH

CALIFORNIA

OKLAHOMA

OREGON/WASHINGTON/ MONTANA/IDAHO

TEXAS

Goodfellow Corporation www.goodfellowcorp.com (801) 796-6126

Herrmann Equipment www.herrmannequipment.com N CA (916) 783-9333 S CA (909) 877-5597

Van Keppel www.vankeppel.com (844) 499-6363

Modern Machinery www.modernmachinery.com (800) 332-1617

Closner Equipment www.closner.com (210) 732-2131

WYOMING/COLORADO

Power Motive www.powermotivecorp.com (303) 355-5900

Page 30 • October 24, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

New Addition...

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years 2003 Etnyre 2WD chip spreader, computerized, 11 ft spread hopper w/individual air gates & agitator, Cummins dsl eng, folding rear hopper - $58,000

2015 Laymor Sweepmaster SM400 broom, Kubota diesel engine, water system, 8 ft broom, cab w/heat & a/c, all new tires

2009 Etnyre Centennial II distributor, 2000 gallons, BT-1 computer, propane burners, 16 ft spray bar, 2009 Ford F750XL, Cat C7 dsl eng, auto trans - $87,000

ST Engineering LeeBoy Inc. Names Bieller Its New CEO ST Engineering LeeBoy construction equipment sector Inc., a commercial asphalt board of directors. equipment manufactur“I am very excited to er, announced Brian announce that I have Bieller has been joined the leading named chief execcommercial utive officer. asphalt equipBieller has ment manufacmore than 20 turer in the years’ experiworld,” Bieller ence in the said. “As the industry after new chief execmost recently utive officer of serving as presiLeeBoy, I am dent of Dynapac grateful to join North America. this passionate He also served as team. Together we vice president of sales will work to continue of Dynapac and vice to build on the over 55 president of the road conyears of success that began struction equipment division of with BR Lee and the Lee family, Brian Bieller Atlas Copco USA. which continues today.”

In addition, Bieller serves on the For more information, visit Association of Equipment Manufacturers’ www.LeeBoy.com. 

Dynapac Announces Jamie Roush as New President/GM 2009 Etnyre Centennial II distributor, 2000 gallons, BT-1 computer, propane burners, 14 ft spray bar, 2009 Sterling L7500 w/Mercedes dsl eng, 6 spd trans, 2 spd axle - $87,000

2013 Etnyre Centennial II distributor, 2000 gallons, BT-1 computer, propane burners, 16 ft spray bar, Ford F750XL, Cummins diesel engine, auto trans - $115,000

2003 Rosco Maximizer II distributor, 1750 gallons, EZ-2S computer w/1 ft cut-offs, diesel heat, 12 ft spray bar, 2003 Freightliner, Cummins dsl eng, auto trans $52,000

New Marathon TPS250T tack distributor, Honda gas eng, 18GPM pump, 250 gal, 5 ft spray wand w/50 ft hose, 6 ft spray bar, operator’s platform, propane burners, flushing system, electric brakes - $14,400

2011 Etnyre Centennial II distributor, 2000 gallons, BT-1 computer, diesel burner, 12 ft spray bar, Ford F750XL, Cummins 6.7L dsl eng, auto trans - $99,000

1989 Etnyre chip spreader, 12 ft spread hopper, Cummins 5.9L diesel engine, hydrostatic drive, 2WD $18,000

3517 Wayne White Rd., Climax, NC 27233

Dynapac has appointed Jamie Roush president/general manager of Dynapac North America, effective Oct. 1, 2021.

Roush is a long-time industry veteran with more than 20 years of experience Jamie Roush in the equipment industry. Roush has been with Dynapac North America since the transition in 2017 and held various management positions at Atlas Copco LLC since 2007.

“Jamie has successfully managed in his present role as vice president of sales, Dynapac North America, with a proven track record,” Paul Hense, president of Dynapac said.

Roush will continue his work with the team at Dynapac, helping facilitate the company’s growth in the North American mar-

ket under his strong leadership.

“We have such a great team here at Dynapac. Everyone throughout the company is very passionate about the brand,” Roush said.

“As the new president, I am sincerely excited about our future and look forward to building on our success since joining the Fayat group.

Dynapac is poised now more than ever to grow with our customers.

We have spent the last few years strategically aligning and launching innovative products that differentiate us in the market.”

For more information, visit www.dynapac.us. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2021 • Page 31

ARNOLD MACHINERY COMPANY www.arnoldmachinery.com Las Vegas, NV 702/642-9000 Phoenix, AZ 602/414-1900 Tucson, AZ 520/294-7677

ASCO EQUIPMENT www.ascoeq.com Beaumont, TX 409/212-8100 Brenham, TX 979/836.6641 (North) Houston, TX 281/987.1990 (South) Houston, TX 713/649.0940

BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511 866/796-3211

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com Oklahoma City, OK 800/375-3339 McAlester, OK 918/310-1550 Tulsa, OK 800/375-3733 Kansas City, KS 877/851-5729

ROMCO EQUIPMENT CO. www.romco.com Austin, TX 512/388-2529 877/851-1026 Buffalo, TX 903/322-5602 Dallas (Carrollton), TX 214/819-4100 800/227-6626 Ft. Worth, TX 817/626-2288 866/966-4602

Longview, TX 903/758-5576 Midland, TX 432/234-9409 San Antonio, TX 210/648-4600 800/966-4601

Page 32 • October 24, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Contractors Compete at GOMACO Invitational #39

A

fter an unprecedented year off, the GOMACO Invitational #39 returned, welcoming guests from the United States and Canada back to enjoy one another’s company and a few rounds of golf. The weather did not disappoint, cool mornings gave way to sunny afternoons making for perfect golf weather.

The GOMACO Invitational began on Sept. 14, with the Putting Tournament. Computer generated teams of two battled it out on four different greens at the Ida Grove Golf and

(L-R): GOMACO Invitational #39 “Grand” Champions were from the Mapleton course and included team members David Barthel of Faris Machinery; Rick Schwer of Roads and Bridges magazine; David Shelstad of MOBA AG; and Randy Bach, GOMACO.

Country Club, with the top team from each green advancing to the Putting Championship. Crowned this year’s putting champions were Andru Small of Terry Equipment, Bloomington, Calif., and Mike Leinbaugh of GOMACO, Ida Grove, Iowa.

Immediately following the Putting Tournament was the Contractors’ Shoot-Out, which featured six, three-person teams of GOMACO contractors competing in a five-hole tournament. The highest scoring team on each hole was

eliminated. This year’s Contractors’ Shoot-Out Champions were Blake Driskell of Gerdan Slipforming Inc., Cape Girardeau, Mo., Tim Frerichs of Michels Paving, Brownsville, Wis., and Peter Sundell of Stewart & Sundell, N. Las Vegas, Nev. On Sept. 15, the Invitational Scramble best-ball tournament began mid-morning on the four area golf courses: Ida Grove, Holstein, Mapleton and Odebolt. Computer-generated teams of four played 18 holes, after which each course champion advanced to the Championship round played at the Ida Grove course.

The “Grand” Champion team was from the Mapleton Course and included Randy Bach, GOMACO (retired), Ida Grove, Iowa; David Barthel of Faris Machinery, Commerce City, Colo.; David Shelstad of MOBA AG, Minnetonka, Minn.; and Rick Schwer of Roads and Bridges Magazine, Arlington Heights, Ill. They won the Mapleton tournament with a score of 64, or six under par.

The Ida Grove tournament champion team members, with a score of 59, or 11 under par, included Kent Godbersen, GOMACO, Ida Grove, Iowa; Brian Buchholtz of Anderson Contractors, Pierre, S.D.; Elroy Buren of Complete Concrete, Rapid City, S.D.; and Juan Velasquez of C.W. Matthews Contracting, Marietta, Ga. Champions from the Ida Grove course (L-R) were Elroy Buren of The first-place team from Odebolt, Complete Concrete; Juan Velasquez of C.W. Matthews Contracting; Brian Buchholtz of Anderson Contractors; and Kent Godbersen, GOMACO.

Champions from the Holstein course (L-R) were Blake Driskell of Gerdan Slipforming Inc.; Al Stoakes of Iowa Fluid Power; Jim Gunderson of Legends Concrete; and Scott Wilson of M.I.C.I.

see GOMACO page 36

Champions from the Odebolt course (L-R) were Mark Kline of Danfoss Power Solutions; Shane Jager of Cain Ellsworth and Company; Terry Hennessey of Fabick CAT; and Kevin Garcia of Trimble Navigation.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2021 • Page 33

KIRBY-SMITH MACHINERY INC.

NUECES POWER EQUIPMENT

4RIVERS EQUIPMENT

www.kirby-smith.com

www.nuecespower.com

www.4riversequipment.com

6715 W. Reno Oklahoma City, OK 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 918-438-1700

Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600 Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826

Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000 Waco, TX 254-261-1370

Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066

Vinton, TX 915-541-0066 Houston, TX 713-247-0066 San Antonio, TX 210-310-0066

Fort Collins, CO 970-482-7154 Frederick, CO 800-490-6162 Colorado Springs, CO 800-364-3029

Pueblo West, CO 719-547-3505 Albuquerque, NM 505-884-2900 Farmington, NM 505-326-1101

HONNEN EQUIPMENT CO. www.honnen.com Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090

Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441 Ogden, UT 801-627-0049 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

Page 34 • October 24, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Innovating With Performance-Focused BMD Process

By Buzz Powell and Brett Williams SPECIAL TO CEG

Industry and agencies share a unified desire for pavements that perform well under the loads of the traveling public and the environments in which they are placed.

Asphalt pavement mixture design has evolved as demands on pavements increase and as engineering continues to advance in building high-performance and cost-efficient pavements. That’s led to balanced mix design (BMD), which is proving successful in places like Alabama. But it might still be “new” to some road owners and mix producers.

What is BMD, how did it come to be, and what are its benefits?

The Path to BMD The Strategic Highway Research Program (SHRP) introduced the Superior Performing Asphalt Pavement system (Superpave) in 1993 to implement performance testing and volumetric design methods to account for traffic and environment, as well as a new asphalt binder grading system.

The intention was to replace Marshall stability and flow testing with a new test(s) that measured basic material properties that were more predictive of actual rutting and cracking performance.

While the Simple Performance Test (SPT) has undergone several iterations and a name change, it has not matured into a test that can be used during construction. In response to this mixture performance testing void, several different laboratory tests have been developed, many of them focused on the cracking performance of asphalt mixtures.

Additionally, efforts have been made to formally shift the design focus toward balancing the cracking and rutting performance and away from some of the now well-established volumetric requirements.

When you dissect this design and testing trajectory, the factors critical to widescale adoption of the BMD process become apparent, empowering the industry to move toward mixtures that can outperform their predecessors.

A BMD Success Many states have begun implementing BMD or are in the process of doing so. One such example provides perspective on how simple the approach can be while demonstrating meaningful advantages over the volumetric-based system.

The example BMD implementation dates back to summer 2019, when two Alabama counties (Geneva and Houston) sought advice from the National Center for Asphalt Technology (NCAT) to improve asphalt mixture quality for the purchase order mate-

rials the counties procure through annual contracts. Their initial inquiry stemmed from the idea of eliminating reclaimed asphalt pavement (RAP) from the mixtures to address performance concerns the counties had experienced with their pavements. But NCAT presented a different solution.

NCAT offered a simplified BMD approach that focused on rutting and cracking performance while allowing for increased RAP use. The approach required satisfactory performance testing during construction to ensure contracted materials would meet the counties’ performance expectations.

Let’s review some of the keys to implementation:

RAP usage required producers to pay close attention to its quality.

This opportunity for innovation in meeting the performance testing requirements led to bids for BMD asphalt mixtures that were cheaper than the traditional specification for purchase order asphalt mixtures from the same producer.

Simple The new BMD specification addressed all the asphalt mixture performance requirements in just over 350 words. The specification removed the mixture volumetric requirements, replacing them with the performance testing requirements and frequencies, which eliminated confounding constraints to produce the desired outcome.

The specification used the IDEAL-CT

Performance The new county specification was developed using mix performance thresholds tied to NCAT Pavement Test Track findings from the 2015-2021 cracking group experiment, which correlated field performance to laboratory performance testing. The specification threshold values for IDEALCT (50) and hot-IDT (17 psi) testing results in mixes that perform well in both rutting and cracking in the Alabama climate, using local aggregates and asphalt binders, as deterBuzz Powell, NCAT photo mined by testing conducted on numerous mixes from the region.

Determination of threshold values was an and hot-IDT tests, which can be conducted important step because BMD implementa- with equipment commonly found in asphalt tion should always be based on the proven laboratories in Alabama. Doing so leveraged performance of jurisdictional materials and existing staff competency without additional mixes. Local asphalt producers embraced capital investment to quickly bring new testthe specification change and quickly ing protocols online. responded by evaluating their existing Additionally, the performance tests are Superpave mixtures and determining the run on specimens that are easy to fabricate design changes necessary to meet the new with a gyratory compactor and do not requirements. Producers also explored require cutting, reducing opportunities for opportunities to be innovative, improve error in specimen preparation. Testing operational efficiency and increase the sus- results can be obtained within four hours of tainability of their asphalt mixtures. retrieving the sample. Rapid findings are Interestingly, changes made to the critical for using the performance data to Superpave mix designs moved the blends proactively adjust asphalt mixture productoward the Marshall mixtures used in tion operations to maintain quality within the Alabama in the past, with one significant expected range. Determining test results change: increasing asphalt binder content by does not require significant calculations and 0.5 to 0.75 percent. the values needed are clearly understood While additional asphalt binder can when the test is completed, allowing techniimprove cracking test results and mixture cal staff to quickly ascertain what actions are durability, its additional cost must be offset required for quality control and acceptance. by improved performance. In the Alabama case, the BMD mixtures allowed producers Responsible to also increase RAP content up to 35 perWhile the county was initially leaning cent, where previous Superpave mixtures toward eliminating RAP from the mixtures, only included 20 percent RAP. Increased the simplified BMD solution allowed for

RAP utilization to increase (from 20 to 35 percent), while also increasing the performance and service life of these pavements.

Responsible use of recycled materials complemented with high-performing, long-life pavements ensure the industry can continue to meet the needs of the traveling public in the most sustainable and environmentallyfriendly manner possible. If improved performance and increased recycling were not enough, the cost savings of the new BMD specification alone made the changes a huge win for all parties and shows how much promise BMD implementation offers to the asphalt industry.

Innovative The simple BMD specification lifted the volumetric requirements and established criteria tied to local field mixture performance, freeing the producer to develop new and innovative approaches to meet performance expectations, realize economic advantages, remain environmentally conscious by using local and recycled materials, and leverage technology to enhance performance. While the new performance requirements led to a significant increase in the most expensive component of the mix — asphalt binder — producers found innovative ways to contain, and even reduce, overall costs.

Positive Outcomes in Alabama In Geneva and Houston counties, the new BMD specification has been embraced by contractors that are finding methods to increase mixture performance, embrace innovation and reduce costs. The counties plan to continue using the specification, as they have seen quality improvement in the mixtures. Contractors have reported mixes are easier to place and compact.

The new specification captured the attention of the Alabama Department of Transportation (ALDOT) and counties throughout the state. ALDOT has a longterm plan for implementing BMD, which includes state-level shadow projects and trial projects. While researchers continue to learn more about BMD testing methods, sample conditioning options, and local threshold performance limits, simple BMD is hard at work in Alabama counties advancing safe, durable, and sustainable asphalt pavements.

Buzz Powell is from the National Center for Asphalt Technology. Brett Williams is from NAPA. (Reprinted with permission from the National Asphalt Pavement Association) 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2021 • Page 35

The work may be under your feet, but you’re looking ahead - to the next challenge and the next deadline. Your local Cat Dealer RœHUV VDOHV VHUYLFH DQG VXSSRUW IRU WKH IXOO :HLOHU FRPPHUFLDO SDYLQJ OLQH LQFOXGLQJ SDYHUV WDFN GLVWULEXWRUV DQG FRPSDFWRUV

Built to Exceed the Demands of the Commercial Paving Contractor

WE’RE RIGHT THERE WITH YOU Cashman Equipment

Holt of California

Quinn CAT

N C Machinery

Tractor & Equipment

cashmanequipment.com

holtca.com

quinncompany.com

ncmachinery.com

tractorandequipment.com

Serving Nevada & the Eastern Sierras 888-CASHMAN (888-227-4626) Henderson/Las Vegas, NV Elko, NV Reno/Sparks, NV Round Mountain, NV Winnemucca, NV

7310 Pacific Avenue Pleasant Grove, CA 95668 916-921-8800 1521 West Charter Way Stockton, CA 95206 209-466-6000 3440 East Pacheco Blvd.

Los Banos, CA 93635 209-826-4919

Bakersfield, CA 661-393-5800 Foothill Ranch, CA 949-768-1777 Fresno, CA 559-896-4040 Los Angeles, CA 562-463-4000 Riverside, CA 951-686-4560

Tukwila, WA 425-251-5800 Chehalis, WA 360-748-8845 Fife, WA 253-896-0878 Monroe, WA 360-805-6000 Mount Vernon, WA 360-424-4292 Port Angeles, WA 360-452-9222

East Wenatchee, WA 509-886-5561 Yakima, WA 509-248-2371 Anchorage, AK 907-786-7500 Fairbanks, AK 907-452-7251 Juneau, AK 907-789-0181 Wasilla, AK 907-352-3400

Billings, MT 406-656-0202 Bozeman, MT 406-585-5800 Great Falls, MT 406-761-7900 Helena, MT 406-442-2990 Williston, ND 701-713-2100 Worland, WY 307-347-4747

Page 36 • October 24, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

After Year Off, GOMACO Golf Invitational Returns

The 2021 Contractors’ Shoot-Out champions (L-R) were Peter Sundell of Stewart & Sundell; Tim Frerichs of Michels Paving; and Blake Driskell of Gerdan Slipforming Inc. GOMACO from page 32

with a score of 65, or six under par, included Kevin Garcia of Trimble Navigation, Westminster, Colo.; Mark Kline of Danfoss Power Solutions, Norwalk, Iowa; Shane Jager of Cain Ellsworth and Company, Sheldon, Iowa; and Terry Hennessey of Fabick CAT, Fenton, Mo. The champion team from Holstein, with a score of 59, or 11 under par, included Al Stoakes of Iowa Fluid Power, Cedar Rapids, Iowa; Blake Driskell of Gerdan Slipforming Inc., Cape Girardeau, Mo; Jim Gunderson of Legends Concrete, Rochester, Minn.; and Scott Wilson of M.I.C.I., Shakopee, Minn.

GOMACO Corporation is a leader in concrete construction equipment with headquar-

ters in Ida Grove, Iowa. GOMACO equipment will slipform concrete streets and highways, airport runways, curb and gutter, sidewalks and recreational trails, safety barrier, bridge parapet and irrigation canals. Support equipment includes grade trimmers, concrete placers, concrete placer/spreaders and texturing and curing machines.

The company also offers equipment to finish flat slabs, bridges and slopes. GOMACO will consult on unique concrete paving applications and equipment needs. Products are offered through a worldwide distributor network for local sales, parts, and service expertise.

For more information, visit gomaco.com. 

Putting Champions from the 2021 GOMACO Invitational were Andru Small (L) of Terry Equipment and Mike Leinbaugh of GOMACO.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2021 • Page 37

BUILT TO CONNECT

A Workhorse To Depend On The Carlson CP100 II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100hp engine, an array of configurations and the class-leading EZCSS single slide screed, it’s time to see why the CP100 II has fast become the contractor’s choice for heavy-duty commercial paver platforms.

astecindustries.com

www.goodfellowcorp.com www.cooperequip.com 5210 N Loop 1604 E San Antonio, TX 78247 (210) 657-5151 201 Commerce City Blvd.

Georgetown, TX 78626 (512) 930-5151

390 North 200 West Lindon, UT 84042 (801) 796-6126 12451 Old U.S. 95 Boulder City, NV 89005 (702) 293-7504

www.modernmachinery.com Kent, WA (800) 669-2425

Billings, MT (800) 735-2589

Rochester, WA (800) 304-4421

Kalispell, MT (800) 434-4190

Spokane, WA (800) 541-0754 Boise, ID (800) 221-5211 Pocatello, ID (800) 829-4450

Missoula, MT (800) 332-1617 Eugene, OR (800) 826-9811 Portland, OR (800) 950-7779

www.herrmannequipment.com

www.closner.com

Northern California 9220 Viking Place Roseville, CA 95747 (916) 783-9333

6532 East Highway 114 Rhome, TX 76078 (817) 708-9108

Southern California 2711 Lilac Ave. Bloomington, CA 92316 (909) 877-5597

21910 FM 2252 Schertz, TX 78154 (210) 732-2131 13800 FM 973 N Manor, TX 78653 (512) 272-8200

Page 38 • October 24, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2021 • Page 39

s®Ý®ã ÊÄ Ê¥ ÊçÙ s® ½ ÙÝ ããÊ Ê

ù͊

MF25 500CS Feed der APCO EQUIPMENT ENT www.apcoequipment.com nt.com 3432 N 5th Street eet N. Las Vegas, NV 89032 (800) 574-40899

5HGHÀQLQJ WKH WRWDO FRVW RI RZQHUVKLS Challenging the Status Quo — NOW with IMIX two stage mixi

BANE MACHINER RY Y, INC. Y, ZZZ EDQHPDFKLQHU\ U\ FRP 2449 Manana Rd. 'DOODV 7; (214) 352-24688 )W :RUW UWK 7; ; (817) 847-58944 7\OHU 7; 7\ (903) 597-66411

CLAIREMONT EQUIPMENT PMENT ZZZ FODLUHPRQWHTXLSP PHQW FRP 7651 Ronson Road ad San Diego, CA 921111 (858) 278-8351 1330 W Mission Road oad Escondido, CA 92029 029 (760) 739-9100 440 West Aten Road oad ,PSHULDO &$ (760) 355-7700 4726 Convoy Street eet San Diego, CA 921111 (858) 278-8338

COOPER EQUIPMENT NT CO. www.cooperequip.com .com

BEE EQUIPMENT SALES ALES LTD. L ZZZ EHHHTXLSPHQWVVDOHV FRP 2506 Slaton Highway way /XEERFN 7; (806) 745-1511

C. L. BOYD CO., INC. ZZZ FOER\G FR RP 4220 West Reno Ave. A 2NODKRPD &LW\ 2.

(800) OKC-BOYD • (405)) 942-8000 Ardmore, OK K (866) 720-2693 • (580) 224-2693 Lawton, OK (800) 633-2693 • (580) /355-6667

/ŶƋƵŝƌĞ ĂďŽƵƚ LJŶĂƉĂĐ͛Ɛ ^ƉĞĐŝĂů &&ŝŝŶĂŶĐŝŶŐ KīĞƌƐ͘

5210 N Loop 16044 E San Antonio, TX 78247 8247 (210) 657-5151 201 Commerce Blvd. vd.

Georgetown, TX 78626 8626 (512) 930-5151

ROAD MACHINER ER RY Y www.roadmachineryyy.com 902 S. 7th Street et Phoenix, AZ 85034 34 (480) 545-2400 Prescott, AZ (928) 778-5621 Tuscon, AZ (520) 623-8681 %DNHUVÀHOG &$ $ (661) 695-4830 Perris, CA (909) 355-3600 Pico Riviera, CA A (562) 699-6767

DOGGETT HEA AVY VY Y MACHINERY SERVICES CES www.doggett.com m $OH[DQGULD /$ (318) 442-0455 Baton Rouge, LA (225) 291-3750 Broussard, LA (337) 837-9481 Covington, LA (985) 893-3005 /DNH &KDUOHV /$ (337) 430-3045 Monroe, LA (318) 343-8787 Shreveport, LA (318) 631-3090 St. Rose, LA (504) 466-5577 Beaumont, TX (409) 842-1754 Bryan, TX (979) 823-1905 Corpus Christi, TX (361) 289-0727 Houston, TX (713) 679-6700 Longview, TX (903) 758-3326 Lufkin, TX (936) 634-8801 San Juan, TX (956) 787-0001 7\OHU 7; 7\ (903) 592-8900 Victoria, TX (361) 570-6666

MODERN MACHINER RY R Y www.modernmachinery..com &RUSRUDWH 2IÀ IÀFH 0LVVRXOD 0RQWDQD (409) 842-1754 Boise, Idaho (208) 336-8670 Jerome, Idaho (208) 324-4522 3RFDWHOOR ,GDKR (800) 829-4450 %LOOLQJV 0RQWDQD (800) 735-2589 &ROXPELD )DOOV 0RQWDQ QD (800) 434-4190 Eugene, Oregon (800) 826-9811 3RUW UWODQG 2UHJRQ (800) 950-7779 Kent, Washington (800) 669-2425 Rochester, Washington n (800) 304-4421 Spokane, Washington n (800) 541-0754

CLOSNER EQUIPMENT www.closner.com

Follow Dyynapac North America

ĞƐŝŐŶ ŶĞĚ ƚŽ ƉĞƌĨ ƌĨŽƌŵ ƌŵ͕ Ƶŝůƚ ƚŽ ůĂƐƚ

dyn napac.us | 800-65 51-0033

6532 East Highway 114 Rhome, TX 76078 (817) 708-9108 21910 FM 2252 Schertz, TX 78154 (210) 732-2131 13800 FM 973 N Manor, TX 78653 (512) 272-8200

Page 40 • October 24, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Contact your local dealer:

Arnold Machinery Company www.arnoldmachinery.com 2975 West 2100 South Salt Lake City, UT 801-972-4000 Idaho Falls, ID 208-523-0822 Meridian, ID 208-887-6000 Twin Falls, ID 208-733-1715 Elko, NV 801-972-4000 Sparks, NV 775-356-1511 Las Vegas, NV 702-642-9000 Phoenix, AZ 602-414-1900

Peerformmancee you o cann count on. oon

Tucson, AZ 520-294-7677

Local Dealer Local dealer address Pacwest Machinery 000.000.0000 www.pacwestmachinery.com www.localdealerweb.xx 8207 South 216th Street Kent, WA 98032 Local Dealer 800-935-5933

Local dealer address

4030 East Trent Avenue Spokane, 000.000.0000 WA 99202 800-938-5933 www.localdealerweb.xx 19255 NE Sandy Blvd Portland, OR 97230 Local Dealer 800-929-5933

Local 1550 Irving Roaddealer address Eugene, OR 97402 000.000.0000 866-920-5933

www.localdealerweb.xx

Local Dealer Local dealer address Sierra Machinery 000.000.0000 www.sierraelpaso.com www.localdealerweb.xx 939 Hawkins Blvd.

El Paso, TX 79915 Local Dealer 915-772-0613

Local dealer address

7179 Roswell Hwy. 000.000.0000 Artesia, NM 88210 575-746-6592 www.localdealerweb.xx

Local Dealer Local dealer address 000.000.0000 Volvo Construction Equipment & Services www.localdealerweb.xx www.vcesvolvo.com Bakersfield, CA 661-387-6090 Corona, CA 951-277-7620 Fresno, CA 559-834-4420 Sacramento, CA 916-504-2300

DEALER LOGO

Lakeside, CA 619-441-3690 San Leandro, CA www.localdealerweb.xx 510-357-9131 Turlock, CA 209-410-6710

At Volvo, we e know that you need reliable, iable, durable dur and capablle paving equipment. pment. That’s why we wo ork to build sustainable, productive a and innovative machines that hat help you y get more done faster. The future is waiting – turrn to your nearest Volvo dealer to lea arn more.

Roads must be built.

Worlds must be connected.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2021 • Page 41

DOUBLE DRUM OSCILLATION & HIGH FREQUENCY

DURABLE EASY TO USE

POWER MOTIVE CORP.

FOUR SEASONS EQUIPMENT

CISCO EQUIPMENT

WESTRAX MACHINERY

www.powermotivecorp.com

www.fourseasons-equip.com

www.cisco-equipment.com

www.westraxmachinery.net

5000 Vasquez Blvd.

Denver, CO 80216 303/355-5900 Grand Junction, CO 970/241-1550 Colorado Springs, CO 719-576-5541

Milliken, CO 970/587-1188 Durango, CO 970/259-0455 Cheyenne, WY 307/634-5149

8111 Mills Road Houston, TX 77064 800-234-5007 281-807-9777 5524 West Ledbetter Drive Dallas, TX 75236 866-270-1700 214-388-1700

1706 S. 1st Street Artesia, NM 88210 800-748-1846

520 SE Loop 338 Odessa, TX 800-657-3673

19618 S. Susana Road Rancho Dominguez, CA 90221 800-411-4717

2707 Slaton Hwy Lubbock, TX 79404 877-745-9595

620 N. Bell St. San Angelo, TX 76903 800-496-0271

19885 Temescal Canyon Road Corona, CA 92881 800-411-4717

www.sakaiamerica.com (800) 323-0535 611 N. Golden Key Street Gilbert, AZ 85233 602-397-8173

Page 42 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Terex RH30E Mining Shovel, 1:50 scale - $150

Grove RT760 Military Mobile Crane, 1:55 scale - $125

Vogele Super 204 Asphalt Paver, 1:50 scale - $120

Komatsu D475A Dozer with Ripper, 1:50 scale - $100

Caterpillar 615 Elevating Scraper, 1:50 scale - $100

Caterpillar 438C Backhoe/Loader, 1:50 scale - $75

John Deere 200LC Excavator, 1:50 scale - $70

Link Belt 210Lx Excavator, 1:50 scale - $70

Komatsu WA30 Compact Wheel Loader, 1:25 scale - $75

Komatsu HD785 Off-Highway Dump Truck, 1:45 scale - $70

Caterpillar 225 Excavator, 1:50 scale - $50

Caterpillar 631E Motor Scraper, 1:50 scale - $50

Caterpillar D6H Track-Type Tractor, 1:50 scale - $150

Komatsu PC100 Excavator, 1:48 scale - $70

Bobcat 225 Compact Excavator, 1:25 scale - $50

Caterpillar V-50D Lift Truck, 1:25 scale - $50

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 43

www.cpower.com 9200 Liberty Drive Liberty, MO 64068 816-781-8070 Wichita, KS 316-943-1231 Great Bend, KS 620-792-1361 Liberal, KS 620-624-7274 Woodward, OK 580-256-6014 Salina, KS 785-825-8291 Colby, KS 785-462-8211

Springfield, MO 417-865-0505 Joplin, MO 417-726-5373 Riverside, MO 816-415-6787 Wichita, KS 316-789-7370 Yukon, OK 405-324-2330 Maryland Heights, MO 314-427-4911 Liberty, MO 806-415-6700

Glenn B. Dorning www.gbdorning.com 1744 E. Holt Blvd.

Ontario, CA 91761 909-983-2089

Page 44 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Deutz Corporation’s Newest Power Center West Opens Nov. 1 in Vegas Deutz Corporation has chosen a location for its newest Deutz Power Center. The new facility, Deutz Power Center West, will be located at 6150 East Tropical Parkway, Suite 135 in North Las Vegas, Nev. The new location will be open for business on Nov. 1, 2021.

“When we began discussing the need for a new Power Center in the western U.S., Las Vegas immediately came to mind because of the large number of rental companies here who support the city’s important trade show and convention industry,” said Dominick A. “Nick” Vermet, vice president, Power Center Operations for Deutz Corporation.

“We’re excited to have found an excellent facility in North Las Vegas that will help us not only serve that industry, but also our customers in nearby California who will now have far better access to Deutz service and parts.”

Jacob Tillack of Las Vegas has been hired as the new location’s service manager. Tillack comes to Deutz with extensive experience that includes positions as a field service technician and as a technical service manager for companies in the Las Vegas metropolitan area.

“We formed a solid base for Deutz Power Center West by bringing Mark Guriel out from our facility in Norcross, Georgia, to become the branch manager here,” Vermet said.

“Now, we’ve brought another extremely competent and tal-

ented individual on board by hiring Jacob. His experience working with and managing technicians in the trucking industry has given him just the right perspective on the value of quick, quality service. Jacob understands that downtime means lost revenue, and we know he will bring that sense of urgency to his work with Deutz Power Center West.”

Deutz Power Center West has a fully stocked parts counter and provides regularly scheduled and emergency service of Deutz engines, either at the Power Center location or at the customer’s site via a team of mobile service technicians.

Some mobile technicians will be permanently located in Los Angeles, San Francisco and Bakersfield, Calif., making it possible to quickly assist customers in those areas.

Like all Deutz Power Centers, the new North Las Vegas location also provides OEMS with dedicated application engineering and technical sales resources. These manufacturers can receive custom, value-added production and assembly services that result in the best possible Deutz solutions for their engine specification and configuration needs.

Deutz Power Center customers can also purchase new Deutz engines, as well as Deutz Xchange remanufactured engines.

For more information about Deutz Power Centers, visit www.deutzsupport.com. For more information about Deutz Corporation and its complete line of diesel and natural gas engines, visit www.deutzamericas.com. 

CISCO EQUIPMENT www.cisco-equipment.com 1706 South 1st Street, Artesia, NM 88210 575-748-1314 Odessa, TX • 432-550-9181 Lubbock, TX • 806-745-9595 San Angelo, TX • 325-653-2121

FOUR SEASONS EQUIPMENT, INC. www.fourseasons-equip.com 8111 Mills Rd., Houston, TX 77064 • 800-234-5007 Dallas TX • 866-270-1700

NUECES POWER EQUIPMENT www.nuecespower.com 7510 IH-37 Access Rd., Corpus Christi, TX 78409 361-289-0066 Laredo, TX • 956-725-0066 San Antonio, TX • 210-310-0066 San Benito, TX • 956-361-0066 Victoria, TX • 361-576-0066 El Paso, TX • 915-541-0066

KSM Promotes Kunin to Vice President PORTER GROUP USA

Following the promotion of John Arapidis to president and CEO of Kirby-Smith Machinery Inc. (KSM,) the heavy equipment distributor has found a successor for Arapidis’ previous role, recently naming Mike Kunin as vice president of National Accounts.

Kunin will be responsible for the management and continued development of long-term strategic partnerships between KSM and its national account customers. He brings a wealth of experience and established customer relationships to the position, having held several key roles at Komatsu America Corp. over the last 21 years, including parts sales, construction and support equipment and most recently as business directorCentral Region. He will be located at KSM’s Oklahoma City headquarters.

Jeff Weller, executive vice president and chief operating officer of KSM, believes Kunin’s leadership and familiarity with KSM’s customer base will make him an instant contributor.

“Anyone who has been around Komatsu for the past two decades will recognize the name Mike Kunin,” said

Mike Kunin

Weller. “Mike is a natural fit for this position. His experience as a leader, along with his account-development and project management skills, outstanding communication, and keen attention-to-detail will all pay immediate dividends. We feel very fortunate that Mike will be bringing his talents and passion for excellence to our company.”

In working with KSM through Komatsu, Kunin had been drawn to the

distributor’s customer-focused culture.

“For years, I have witnessed firsthand how Kirby-Smith takes care of their customers. It’s a privilege to now be part of it, and I am excited for the opportunity to move to Oklahoma City and join the Kirby-Smith family.”

www.portergroupusa.com 13013 Temescal Canyon Rd, Corona, CA 92883 951-674-9999 Pacoima, CA • 818-834-0102 Newark, CA • 510-713-7368

About Kirby-Smith Machinery, Inc. Kirby-Smith Machinery Inc. was established in 1983 and is recognized as one of the premier new and used heavy construction equipment and crane dealers in the country. KirbySmith Machinery and its hundreds of dedicated professional employees are committed to providing reliable new and used equipment for sale and equipment rentals, as well as responsive service and equipment parts for multiple makes and models. Kirby-Smith Machinery has 12 branch locations in Oklahoma, Texas, Kansas and Missouri, as well as a dedicated Pipeline Services Division. For more information about Kirby-Smith Machinery, call 888-861-0219 or visit kirby-smith.com. 

www.mecomequipment.com 4546 N Wilson Way, Stockton, CA 95205 209-466-5135

MECOM EQUIPMENT

JET CITY EQUIPMENT www.jetcityequipment.com 33345 SR 20, Oak Harbor, WA • 360-675-4441 Marysville, WA • 360-651-9079 Wenatchee, WA • 509-888-8181

R & S INDUSTRIES, INC. www.rsindinc.com 951 CR G, Clovis, NM 88101 575-769-8659

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 45

Get an “A” with Hyundai

Hyundai Construction Equipment is excited to announce the launching of our new A-series machines. Along with a new look, these machines are packed full of standard new features and benefits to get the job done efficiently.

• Cummins Performance Series Engines Stage V emissions compliant engines • No EGR (Exhaust Gas Recirculation) Improved fuel consumption • Smart Power Mode 3-5% fuel savings in high load work • New engine hood design Enhanced visibility to rear of machine

More standard features. More value.

www.hceamericas.com To learn more about the what the new Hyundai A-Series machines can offer your business, contact your Hyundai dealer today.

©2020 Hyundai Construction Equipment Americas. All Rights Reserved.

Page 46 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 47

IN YOUR WORLD,

VERSATILITY IS POWER. The mid-frame G-Series Skid Steers and Compact Track Loader are designed to dominate.

Customers like you asked for ways to work harder and smarter, so we loaded these midsize go-getters with productivity-enhancing features and specs. Impressive pushing power and bucket breakout forces deliver serious traction and leverage, so you can handle heavier loads.

The 3.2-m (10 ft. 6 in.) vertical-lift design makes quick work of loading high-sidewall dump TRUCKS FEED MIXERS AND HOPPERS "ND INCREASED HYDRAULIC Έ OW MEANS YOU CAN MAKE THE MOST of our many attachments — so you can Run Your World. To learn more, call or visit us today.

4RIVERS EQUIPMENT

YELLOWHOUSE MACHINERY

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.4riversequipment.com

www.yhmc.com

www.honnen.com

www.doggett.com

Colorado Springs, CO 719.475.1100 Frederick, CO 303.833.5900 Albuquerque, NM 505.884.2900 Farmington, NM 505.326.1101 Hobbs, NM 575.392.6923 El Paso, TX 915.598.1133

Broken Bow, OK 580-584-3222 Enid, OK 580-233-5000 Tulsa, OK 918-245-5926 McAlester, OK 918-423-2555

Amarillo, TX 806-335-1681 Dalhart, TX 806-884-4994 Lubbock, TX 806-748-4700 Abilene, TX 325-677-2291 Midland/Odessa, TX 432-580-3337 San Angelo, TX 325-651-3337

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001

Victoria, TX 361-570-6666

Lufkin, TX 936-634-8801

Alexandria, LA 318-442-0455

Monroe, LA 318-343-8787

Baton Rouge, LA 225-291-3750

Shreveport, LA 318-631-3090

Broussard, LA 337-837-9481

St. Rose, LA 504-466-5577

Covington, LA 985-893-3005

Tyler, TX 903-592-8900

Longview, TX 903-758-3326

Page 48 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Globe Life Project Earns Award for Excellence in Quality, Safety, Cost

www.romco.com 1519 W. Belt Line Road Dallas (Carrollton), TX 75006 214-819-4100

MANHATTAN from page 26

League and Major League Soccer games.

Last year the award went to Donley’s Turner for the 485,000 sq.-ft. Sheila and Eric Samson Pavilion on the Health Education Campus at Case Western Reserve Univesity’s School of Medicine in Cleveland, Ohio — the first facility for interprofessional education of medical, nursing, dental and physician assistant students.

Much like the motion-picture industry, structures — like movies — can win more than one award. Globe Life Field has accumulated accolades ranging from the Sports Business Journal’s 2020 Best Facility Debut Award to the 2021 TEXO Distinguished Building Award to the American Subcontractors Association North Texas Chapter Platinum $1 Billion+ Award.

Manhattan is well-positioned to produce a grand slam sports complex. Laurence H. Rooney launched the company in 1896 from the Oklahoma Territory, making the organization almost as old as baseball itself.

As the flagship company of the Manhattan Construction Group, the Manhattan Construction Company endures as a fifth generation family-owned operation, according to its website, and it is “one of the largest privately-held construction companies in the country.”

With more than $30 billion put in place in its portfolio and $5 billion in green-building projects, Globe Life Field constitutes Manhattan's fifth OSHA partnership.

The meticulousness of Manhattan’s planning radiates from its own articulation of a timeless formula: “The success of our projects is achieved by the hard work and expertise of our team members….we build excellence and trust. It’s a package deal.”  CEG

ROMCO Equipment

Austin, TX 512-388-2529 Buffalo, TX 903-322-5602 Carmine, TX 979-278-3570 Corpus Christi, TX 361-881-4891 Ft. Worth, TX 817-626-2288 Longview, TX 903-758-5576 Mercedes, TX 956-565-0100 San Antonio, TX 210-648-4600 Stephenville, TX 817-626-2288

Volvo Construction Equipment & Services www.vcesvolvo.com

The Manitowoc 31000 is the largest American-made crawler crane, able to lift up to 1,100 tons as high as 361 ft. from its base.

Bakersfield Bakersfield, CA 661-387-6090 Corona Corona, CA 951-277-7620 Fresno Fresno, CA 559-834-4420 Sacramento Sacramento, CA 916-504-2300 San Diego Lakeside, CA 619-441-3690 San Leandro San Leandro, CA 510-357-9131 Turlock Turlock, CA 209-410-6710

Manhattan Construction received the AGC award on Sept. 22 from Bob Lanham, president of AGC.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 49

MORE MAX FOR THE WAY YOU WORK.

With our MAX-Series machines, we stripped down and reimagined every single detail. From premium 360-degree visibility to our roomiest design yet, these compact track loaders and skid steers are designed with creature comforts that let you work more comfortably MVY SVUNLY WLYPVKZ VM [PTL 7S\Z L]LY` 4(? :LYPLZ THJOPUL PZ I\PS[ [V SLHK [OL PUK\Z[Y` PU O`KYH\SPJ WLYMVYTHUJL [YHJ[P]L LɈ VY[ undercarriage technology, reliability and serviceability, meaning you’ll be able to accomplish more than you ever thought possible.

EXPLORE THE FULL MAX-SERIES LINEUP AT ASVi.COM

DISCOVER THE MAX-SERIES LINE-UP AT CLM Equipment Co. Inc.

FMI Equipment

Jet City Equipment

www.clmequipment.com

www.fmiequipment.com

www.jetcityequipment.com

3135 US Hwy 90 East Broussard, LA 70518 337-837-6693

11111 E Trent Avenue Spokane, WA 99206 509-927-4071

33345 SR20 Oak Harbor, WA 98277 360-675-4441

4851 E Napoleon Road Sulphur, LA 70663 337-625-5942

1947 Saint Street Richland, WA 99354 509-505-5997

10219 State Avenue Marysville, WA 98271 360-651-9079

2815 N Sam Houston Pkwy E Houston, TX 77032 281-598-2500

2713 Euclid Avenue Wenatchee, WA 98801 509-888-8181

© 2021 ASV Holdings, Inc.

Page 50 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

THE TORO® DINGO® TXL 2000 DOES THE WORK OF SEVERAL MACHINES IN ONE. Dig below grade, reach over obstacles and extend your workiing range with the powerful telescoping arms. Enjoy 360˚ visibility from the stand-on

FMI Equipment www.fmiequipment.com

operator platform. You can even use most skid steer and compact track

Toro® Dingo® TXL 2000

loader attachments with the universal

WITH TELESCOPING ARMS

mounting plate. Call 1-800-344-8676, option 1, to find a dealer near you.

OUT. T STANDING.

11111 E Trent Avenue Spokane, WA 99206 509-927-4071 1947 Saint Street Richland, WA 99354 509-505-5997

© 2021 The Toro Company

Bergmann Americas Adds 3,000-Gal. Off-Road Water Truck

The C912s track dumper offers a swivel dump, rear dump and flatbed designs.

New for 2021 is the C815s Bergmann 3,000-gal. offroad water truck.

Bergmann Americas’ product line is a great addition and fit to expand the product offering of all dirt moving applications, especially when contractors are faced with soft conditions, slopes and tight work zones where production requirements are always thrown a curve ball.

Bergmann Americas, with its North American headquarters in Spartanburg, S.C., is the North American importer of the Bergmann product line from Meppen, Germany. The product offering for dealers includes compact articulated dump trucks (15 tons), track dumpers (12 tons) and the Bergmann site dumper lineup (4-10 tons).

Bergmann, which celebrated its 60 year anniversary

last year, has stepped up in a big way in the North American market, according to the manufacturer. Every Bergmann machine provides the best possible combination of Bergmann’s four key design parameters: handling, safety, effectiveness and efficiency.

The Bergmann C815s is a 15-ton compact articulated dump truck with three dump body options: rear dump, swivel dump and three-way dump. New for 2021 is the C815s Bergmann 3,000 gal. off-road water truck. The C912s track dumper offers a swivel dump, rear dump and flatbed designs. The site dumper line up offers extended flexibility in the 4-10 ton class.

For more information, call 864/707-0080. 

The Bergmann C815s is a 15-ton compact articulated dump truck with three dump body options: rear dump, swivel dump and three-way dump.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 51

Four Seasons Equipment

Porter Group USA

Orion Equipment

8111 Mills Rd. Houston, TX 77064 800-234-5007 Dallas, TX 866-270-1700 www.fourseasons-equip.com

13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.portergroupusa.com

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Page 52 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AGC: Know Steps You Can Take to Lessen Cost Pains

As construction projects launch, the need for materials and supplies has increased, creating a surge in demand weighing on the supply chain.

CHALLENGES from page 1

“exceptionally steep and fast-rising costs for a variety of materials, compounded by major supply-chain disruptions and stagnant or falling demand for projects — a combination that threatens the financial health of many contractors.”

No single solution will resolve the situation, Simonson, association economist, wrote in the AGC’s latest Inflation Report.

But he believes there are steps that government officials, owners and contractors can take to lessen the pain.

“While contractors cannot unclog ports or rescind tariffs, they can provide project owners with timely and credible third-party information about changes in relevant material costs and supply-chain snarls that may impact the cost and completion time for a project,” he said.

For their part, owners “can authorize appropriate adjustments to design, completion date and payments to accommodate or work around these impediments,” he added.

Pinpointing Problem The adverse effect of pockets of construction expansion on the supply chain is creating headaches. “As construction projects continue to rise, general contractors’ needs for materials and supplies have also increased, which has created a surge of demand that’s been weighing on the supply chain,” said Eric Collin, owner and president of Firmo Construction, Sarasota, Fla. “We all know well that the availability and prices of many of the materials used by construction contractors have been affected dramatically since the start of the COVID19 pandemic,” wrote Mike Sanders, bond manager of Old Republic Surety.

“Many materials are difficult to find, and

Contractors should monitor costs and delivery schedules for materials, and communicate with owners, both before submitting bids and throughout the construction process.

when they are found, they are at extremely high prices as compared to the cost before the pandemic,” he wrote for Insurance Journal. Some of the materials most noticeably affected include lumber, products made from copper and steel and plumbing fixtures.

“While other unique factors contribute, the biggest culprits for the volatility are the COVID lockdowns, COVID restrictions, business closures, higher-than-expected demand and a reduction of the available workforce in the industries that produce and distribute these materials,” he said, adding that some traditionally off-the-shelf materials are taking weeks or even months for delivery.

Contractors may be feeling a big pinch, especially on projects originated prior to the pandemic, said Sanders. In many cases, he added, materials suppliers will not lock in their quoted prices for the amount of time the contractor needs to ensure the prices they ultimately pay do not exceed those contemplated at the time their bid was made.

“Some suppliers will not lock prices in for any longer than a week, and some contractors report that certain suppliers are unwilling to lock prices in for more than a day.”

Running an End-Around Simonson of AGC said though nobody welcomes a higher bill, the alternative of having a contractor go out of business because of impossible costs or timing is likely to be worse for many project owners.

For projects that have not been awarded or started, he suggests owners start with realistic expectations about current costs and the likelihood of increases. They should provide potential bidders with accurate and complete design information to enable bids that minimize the likelihood of unpleasant surprises for either party.

Owners and bidders may want to consider price-adjustment clauses that would protect both parties from unanticipated swings in materials prices, said Simonson.

“Such contract terms can enable the contractor to build in a smaller contingency to its bid, while providing the owner an opportunity to share in any savings from downward price movements [which are likely at some point, particularly for long-duration projects],” he said.

The parties also may want to discuss the best timing for ordering materials and components. Buying items earlier than usual can provide protection against cost increases, suggested Simonson.

“But purchase before use entails paying sooner for the items; potentially paying for storage, security against theft and damage and the possibility of design changes that make early purchase unwise.”

AGC has long encouraged federal trade policy officials to end tariffs and quotas on imported products and materials. The association maintains that with many U.S. mills and factories already at capacity, bringing in

more imports at competitive prices will cool the overheated price spiral and enable many users of products that are in short supply to avoid layoffs and shutdowns.

“Officials at all levels of government should review all regulations, policies and enforcement actions that may be unnecessarily driving up costs and slowing importation, domestic production, transport and delivery of raw materials, components and finished goods,” Simonson said in his report.

“Owners need to recognize that significant adjustments are probably appropriate regarding the price or delivery date of projects that were awarded or commenced early in the pandemic or before, when conditions at suppliers were far different.”

And contractors need to closely monitor costs and delivery schedules for materials and to communicate information with owners, both before submitting bids and throughout the construction process, said Simonson. “Materials prices do eventually reverse course. Owners and contractors alike will benefit when that happens.”

Communication is key, said Carl Pebworth and Rachael Stack of the law firm Faegre Drinker Biddle & Reath. It’s crucial for owners, contractors and other “downstream” construction partners to contemplate and address concerns from the beginning, they said.

“With respect to material price increases, see CHALLENGES page 66

Page 54 • October 24, 2021 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Cat D4 Dozer Offers Better Visibility, More Productivity The Cat D4 (formerly D6K2) dozer has long been a favorite because of its power, precision and optimized balance for smooth grading performance. The latest D4 takes the value up a level with improved sight lines, reduced operating costs and the broadest choice of easy-to-use technology features to help get the most from the bulldozer.

The D4 weighs in at 29,259 lbs.

(13,272 kg), with a net power of 130 hp (97 kW). D4 LGP has an operating weight of 30,882 lbs.

(14,008 kg).

Lower Operating Costs Longer service intervals contribute to up to 7 percent lower maintenance costs. Engine oil/engine oil filter service interval has been extended to 1,000 hours. [First change at 500 hours. Scheduled Oil Sampling (S·O·S) required. Please refer to Operation and Maintenance Manual (OMM) for details.]

Service intervals also have been extended on the air cleaner and diesel exhaust fluid (DEF) pump filter.

LED lights offer up to six times the life of halogen to save on parts cost.

Connect to Greater Get a Better View Efficiency A lower sloping hood line proCat Link telematics technology vides up to 30 percent better visibilhelps take the complexity out of ity to the area in front of the blade. managing job sites — by gathering The shorter sight lines mean the data generated by equipment, matevisual distance between the blade The Cat D4 (formerly D6K2) dozer has long been a favorite because of its power, precision and rials and people — and serving it up and the material pile is shortened by optimized balance for smooth grading performance. The latest D4 takes the value up a level with in customizable formats. about 40 percent, so less time is improved sight lines, reduced operating costs and the broadest choice of easy-to-use technology • Product Link collects data autospent backing up to get a full view features to help get the most from the bulldozer. matically and accurately from equipof the material and the job gets done ment assets — any type and any Cat Grade with 3D. The system uses a GPS with 3D, automating blade lift to help get brand — which can be viewed online faster.

In the cab, operators will find a more com- signal to automatically adjust blade move- more consistent blade loads with each pass through web and mobile applications. fortable seat with improved suspension and ments — both lift and tilt — as the operator and reduce track slip. Works seamlessly with • Access information anytime, anywhere multiple adjustments for personalized com- follows the design plan. Antennas and Grade with 3D and Slope Assist. with VisionLink. Cat dealers can help With the capability of installing 3D grade configure a customized subscription, availfort. An easy-to-use 10-in. touchscreen main receivers are housed in a low-profile roofdisplay, now common across much of the mounted spoiler. An intuitive 10-in. grade systems from Trimble, Topcon and Leica, able with cellular or satellite reporting or both.

Cat dozer lineup, puts machine settings and operator interface works like a smart phone, the D4 can easily integrate into job sites with • The Cat App helps manage assets — at features in easy view. A standard high defi- making it easy for operators to pick up existing grading technology infrastructures. any time — right from a smartphone. nition rearview camera shows prominently quickly. Android OS platform allows instal- All Cat Grade systems are compatible with • Remote Troubleshoot saves time and lation of custom apps for more versatility.

Trimble, Topcon and Leica radios and base money by allowing a Cat dealer to perform in the main display.

AutoCarry also is packaged with Grade stations. diagnostic testing remotely. Remote Flash Technology Choices updates on-board software without a techniThe D4 includes several standard technolcian being present, at a convenient time, ogy features aimed at helping operators potentially reducing update time by as much work more efficiently, regardless of experias 50 percent. ence level. The cab also offers optimal inte• Application Profile and Operator ID helps rior mounting locations that make it simple save time by saving preferred machine settings. to install the grade control system of choice.

• Machine Security – Passcode provides • Slope Indicate shows machine mainfall an optional additional level of security by and cross-slope on the main display for easy requiring an operator to enter an ID before reference. the machine will start.

• Stable Blade works seamlessly with operator blade inputs for smoother surfaces.

Equipped for the Job • Traction Control automatically reduces The D4 is available in standard or low track slip to save time, fuel and track wear. ground pressure (LGP) configurations. A An optional technology package includes variable pitch angle tilt (VPAT) blade is stanthe standard technology features, plus: dard, with an option for a foldable VPAT • Cat Grade with Slope Assist provides blade to reduce transport width. basic blade positioning assistance without The D4 also can be ordered with specialadded hardware or a GPS signal. Updated ized guarding to take on the challenges of main display makes the system intuitive and forestry/land clearing. In addition to easy to use. machine protection against impacts and air• Factory Attachment Ready Option borne debris, these specialty dozers can be (ARO) provides optimal mounting locaordered with an impact-resistant cab featurtions, brackets and hardware and simplifies ing polycarbonate windows. installation of any brand of grade control For more information, visit www.cat.com. system.

Note: All comparisons to previous model The D4 weighs in at 29,259 lbs. (13,272 kg), with a net power of 130 hp (97 kW). D4 Customers also can add factory integrated LGP has an operating weight of 30,882 lbs. (14,008 kg).

D4/D6K2 

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 24, 2021 • Page 55

+OHN%EERE COM %OZERS

DEADLINES? LET ‘EM EAT DUST. With the most horsepower in its class pushing a 161” available blade, the all-new 750L delivers deadline-crushing EF CIENCY /OT TO MENTION MONEY MAKING ACCURACY THANKS TO OPTIONAL SLOPE CONTROL WHICH CAN EASILY BE UPGRADED TO OUR FULLY INTEGRATED 4MART(RADEs % GRADE CONTROL SYSTEM 4O OPERATORS CAN HOLD GRADE WITH LESS EFFORT THE JOB IS DONE FASTER AND YOU MOVE ON TO THE NEXT ONE )EY IF YOUlRE GOING TO RUN YOUR WORLD THEN run.

MOST HP IN ITS CLASS

161” BLADE

GRADE CONTROL OPTIONS

4RIVERS EQUIPMENT

YELLOWHOUSE MACHINERY

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.4riversequipment.com

www.yhmc.com

www.honnen.com

www.doggett.com

Colorado Springs, CO 719.475.1100

Broken Bow, OK 580-584-3222

Amarillo, TX 806-335-1681

Frederick, CO 303.833.5900

Enid, OK 580-233-5000

Dalhart, TX 806-884-4994

Albuquerque, NM 505.884.2900

Tulsa, OK 918-245-5926

Lubbock, TX 806-748-4700

Farmington, NM 505.326.1101

McAlester, OK 918-423-2555

Abilene, TX 325-677-2291

Hobbs, NM 575.392.6923

Midland/Odessa, TX 432-580-3337

El Paso, TX 915.598.1133

San Angelo, TX 325-651-3337

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441

St. George, UT 435-652-8003 Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001

Victoria, TX 361-570-6666

Lufkin, TX 936-634-8801

Alexandria, LA 318-442-0455

Monroe, LA 318-343-8787

Baton Rouge, LA 225-291-3750

Shreveport, LA 318-631-3090

Broussard, LA 337-837-9481

St. Rose, LA 504-466-5577

Covington, LA 985-893-3005

Tyler, TX 903-592-8900

Longview, TX 903-758-3326

Page 56 • October 24, 2021 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

see CHART page 60

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

CASE

CATERPILLAR Crawler Dozers LGP D1 LGP D1 Mulcher LGP D2 LGP D3 LGP D4 D5K2 LGP D5 LGP D6K2 LGP (Tier 4F) D6 LGP (30 in.)

D6 XE LGP (30 in.)

D6 WH LGP (30 in.)

D6 XE WH LGP (30 in.)

D6 LGP (36 in.)

D6 XE LGP (36 in.)

D6 WH LGP (36 in.)

D6 XE WH LGP (36 in.)

D7 LGP D8T LGP D8T WH LGP

80 (60) 104 (78) 92 (69) 104 (78) 130 (97) 104 (78) 170 (127) 132 (98) 215 (160) 215 (160) 215 (160) 215 (160) 215 (160) 215 (160) 215 (160) 215 (160) 265 (198) 354 (264) 354 (264)

18,839 (8,545) 24,698 (11,203) 19,066 (8,648) 21,810 (9,893) 29,259 (13,272) 20,992 (9,522) 42,263 (19,170) 30,664 (13,909) 50,130 (22,739) 50,130 (22,739) 52,751 (23,928) 52,751 (23,928) 52,751 (23,928) 52,751 (23,928) 55,674 (25,253) 55,674 (25,253) 63,220 (28,676) 83,200 (37,739) 92,300 (41,867)

Cat C3.6 Cat C3.6 Cat C3.6 Cat C3.6 Cat C4.4 Cat C4.4 ACERT Cat C7.1 Cat C4.4 ACERT Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C15 ACERT Cat C15 ACERT

D1 XL D2 XL D3 XL D4 D5 D6 D6 XE D6 WH D6 XE WH D6K2 XL (Tier 4F) D7 D7 WH D8T D8T WH D9T D9T WH D9T (Tier 4F) D9T WH (Tier 4F) D10T2 D11 D11T CD

80 (60) 92 (69) 104 (78) 130 (97) 170 (127) 215 (160) 215 (160) 215 (160) 215 (160) 132 (98) 265 (198) 265 (198) 354 (264) 354 (264) 410 (306) 410 (306) 436 (325) 436 (325) 600 (447) 850 (634) 850 (634)

17,855 (8,099) 18,382 (8,338) 20,640 (9,362) 29,259 (13,272) 37,875 (17,180) 48,500 (21,999) 48,500 (21,999) 52,166 (23,662) 52,166 (23,662) 29,258 (13,271) 65,644 (29,776) 62,035 (28,139) 87,600 (39,735) 87,600 (39,735) 94,265 (42,758) 109,705 (49,761) 95,917 (43,507) 110,471 (50,109) 139,010 (63,054) 229,800 (104,236) 220,385 (99,965)

Cat C3.6 Cat C3.6 Cat C3.6 Cat C4.4 Cat C7.1 Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C4.4 ACERT Cat C9.3B Cat C9.3B Cat C15 ACERT Cat C15 ACERT Cat C18 ACERT Cat C18 ACERT Cat C18 ACERT Cat C18 ACERT Cat C27 ACERT Cat C32 Cat C32 ACERT

Crawler Dozers Non LGP

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

LIEBHERR Loaders

LR 626 LR 636

141 (105) 181 (135)

35,561 - 41,006 (16,130 - 18,600) 45,327 - 50,305 (20,746 - 22,694)

PR 716 PR 726 PR 736 PR 746 PR 756 PR 766 PR 776

125 (93) 168 (125) 214 (160) 254 (190) 349 (260) 416 (310) 757 (565)

29,100 - 33,510 (13,200 - 15,200) 38,581 - 45,856 (17,500 - 20,800) 46,738 - 56,218 (21,200 - 25,500) 57,100 - 69,446 ( 25,900 - 31,500) 78,044 - 94,799 ( 35,400 - 43,000) 101,909 - 119,462 (46,225 - 54,187) 142,743 - 161,354 (71,800 - 73,189)

Dozers

MODEL

D 924 A7 D 934 A7 D924 A7 D 934 A7 D 934 EVO D 936 A7 D 946 A7 D 9508 A7-04 D 9512 A7

650M LGP 650M LT 650M WT 750M LGP 750M WT 750M LT 850M LGP 850M WT 850M LT 1150M LGP 1150M WT 1150M LT 1650M LGP 1650M WT 1650M XLT 2050M LGP 2050M WT 2050M XLT 2050M LT

MODEL

KOMATSU D37EX-24 D37PX-24 D39EX-24 D39EXi-24 D39PX-24 D39PXi-24 D51PX-24 D51EX-24 D51EXi-24 D51PXi-24 D61EX-24 D61EXi-24 D61PX-24 D61PXi-24 D65EX-18 D65WX-18 D65PX-18 D65EXi-18 D65PXi-18 D65EX-18 WH D65WX-18 WH D65PX-18 WH D71EX-24 D71EXi-24 D71PX-24 D71PXi-24 D71PX-24 Wide D71PXi-24 Wide D85EX-18 D85PX-18 D85EXi-18 D85PXi-18 D85EX-18 WH D85PX-18 WH D155AX-8 D155AX-8 LGP D155AXi-8 D155AX-8 WH D375A-8 D475A-8

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

68 (50) 68 (50) 68 (50) 92 (66) 92 (66) 92 (66) 112 (84) 112 (84) 112 (84) 127 (95) 127 (95) 127 (95) 150 (112) 150 (112) 150 (112) 214 (160) 214 (160) 214 (160) 214 (160)

16,839 (7,638) 15,803 (7,168) 16,405 (7,441) 21,180 (9,607) 20,679 (9,379) 20,040 (9,089) 22,830 (10,355) 22,330 (10,129) 21,560 (9,779) 32,637 (14,804) 32,174 (14,594) 31,134 (14,122) 39,550 (17,939) 38,650 (17,531) 37,750 (17,123) 48,773 (22,123) 46,891 (21,269) 45,414 (20,599) 44,563 (20,213)

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

WH: Waste Handler

89 (66) 89 (66) 105 (78) 105 (78) 105 (78) 105 (78) 131 (98) 131 (98) 131 (98) 131 (98) 168 (125) 168 (125) 168 (125) 168 (125) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 264 (197) 264 (197) 264 (197) 264 (197) 264 (197) 264 (197) 354 (264) 354 (264) 354 (264) 354 (264) 609 (455) 890 (664 )

19,842 (9,000) 20,503 (9,300) 21,891 (9,930) 21,848 (9,910) 22,817 (10,350) 22,774 (10,330) 31,438 (14,269) 30,821 (13,980) 30,380 (13,780) 31,504 (14,190) 40,830 (18,520) 41,094 (18,640) 42,904 (19,460) 43,167 (19,580) 48,796 (22,180) 51,529 (23,373) 51,960 (23,659) 45,780 (20810) 50,420 (22960) 51,065 (23165) 57,035 (25,873) 53,468 (24,225) 49,800 (22,600) 50,045 (22,700) 50,900 (23,100) 51,150 (23,200) 52,700 (23,900) 52,900 (24,000) 68,165 (30920) 63,800 (28940) 67,439 (30,590) 65,080 (29,520) 69,900 (31700) 70,700 (32,070) 89,300 (40500) 92,800 (42100) 90,610 (41100) 95,000 (43,100) 163,340 (74,090) 254,200 (115,300)

ENGINE TYPE

FPT F5C F5HFL463D*G003 FPT F5C F5HFL463D*G003 FPT F5C F5HFL463D*G003 FPT F5HFL413J*A002 FPT F5HFL413J*A002 FPT F5HFL413J*A002 FPT F4HFE413P*A008 FPT F4HFE413P*A008 FPT F4HFE413P*A008 FPT F4HFE613F*A002 FPT F4HFE613F*A002 FPT F4HFE613F*A002 FPT F4HFE6132 FPT F4HFE6132 FPT F4HFE6132 FPT F4HFE613J FPT F4HFE613J FPT F4HFE613J FPT F4HFE613J

ENGINE TYPE

Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D170E-7 Komatsu SAA12V140E-7

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 24, 2021 • Page 57

www.powermotivecorp.com

POWER MOTIVE CORPORATION DENVER HEADQUARTERS 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900 Colorado Springs, CO • 719-576-5541 Durango, CO • 970-259-0455 Grand Junction, CO • 970-241-1550 Milliken, CO • 970-587-1188 Cheyenne, WY • 307-634-5149

www.roadmachinery.com

ROAD MACHINERY LLC Phoenix, AZ • 480-545-2400 Phoenix, AZ • 602-252-7121 Prescott, AZ • 928-778-5621 Tucson, AZ • 520-623-8681 Bakersfield, CA • 661-695-4830 Hayward, CA • 510-659-1903 Fresno, CA • 559-834-3149 Mojave, CA • 661-824-2319 Perris, CA • 909-355-3600 Pico Rivera, CA • 562-699-6767 Redding, CA • 530-229-3820 Sacramento, CA • 916-375-3540 Santa Rosa, CA • 707-544-4147

www.clairemontequipment.com

CLAIREMONT EQUIPMENT 7651 Ronson Road, San Diego, CA 92111 • 858-278-8351 1330 W Mission Road, Escondido, CA 92029 • 760-739-9100 8520 Cherry Avenue, Fontana, CA 92335 • 909-429-9100 440 West Aten Road, Imperial, CA 92251 • 760-355-7700 81-501 Industrial Place, Indio, CA 92201 • 760-863-5558 4726 Convoy Street, San Diego, CA 92111 • 858-278-8338

www.kirby-smith.com

KIRBY-SMITH MACHINERY INC. 6715 W Reno Avenue • Oklahoma City, OK 73137 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370

“WE PU USH EVERYT THING TO O THE LIM MORE RELLIABLE. “How does Komatsuu work for our construction business? First it’ their reliable, qualityy designed and built equipment. W afford downtime, and nd Komatsu’s products are number one in our book. The support pport we receive from our dealer is outstanding as well. Trraining, parts, financing have experienced p the he best personal p care with Komatsu. They just work best for us!”

Hunter and Clint Shackelford Shackelford Construction truction / Yaazoo City,

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com

12320 S. Main Street • Houston, TX 77035 • 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016

That t’s s why hy y I am K Koma ma komattsuamerica.com

ca Corp. All Rights Reserved 036 © 2018 Komatsu America

Page 58 • October 24, 2021 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Komatsu’s D71-24 HST Dozer Features Slant Nose Design Komatsu’s D71EX/PX-24 with a powerful hydrostatic transmission (HST) is effective at grading, pushing, side-cutting and work on soft ground, giving users the flexibility to move from production to finishing with a single machine.

Pushing with 237 hp, Komatsu’s largest HST dozer — 49,824 to 50,927 lbs. (22,600 to 23,100 kg) — helps operators maintain ground speed while operating under heavy loads in H mode. Its distinctive slant nose design offers enhanced visibility to the cutting edges and excellent balance and maneuverability, according to the manufacturer.

Offering precision on the job site, from golf course construction to highway projects, the D71-24 is an all-around crawler dozer. It is equally adept at precise, highspeed grading and rough dozing, and is designed to provide outstanding wearability and functionality with its high-capacity, wear-resistant dozer blade.

The dozer’s Parallel Link Undercarriage System (PLUS) features rotating bushings to help minimize maintenance downtime and cost of ownership.

D71-24, Intelligent Machine Control, iMC 2.0 The industry’s newest slant-nosed HST

Combined with other iMC 2.0 functions, crews can begin stripping or spreading using automated input while waiting for the finish grade model.

• With proactive dozing control, even less experienced operators can automatically cut/strip from existing terrain. The dozer measures the terrain it tracks over and uses that data to plan the next pass, improving productivity by up to 60 percent versus previous generation machines.

For more information, visit https://www.komatsuamerica.com/smartconstruction/intelligent-machine-control . 

The industry’s newest slant-nosed HST dozer also is available with Komatsu’s latest intelligent Machine Control (iMC) 2.0 capabilities.

dozer also is available with Komatsu’s latest intelligent Machine Control (iMC) 2.0 capabilities: • Lift layer control optimizes earthwork productivity with the press of a button. It maintains compaction quality by automatically controlling lifts to the desired height.

Excess fill is eliminated as automatic blade control follows the finish surface once lifts

have reached finished grade.

• Tilt steering control automatically tilts the blade to maintain straight travel during rough dozing. Reduces operator steering input by up to 80 percent.

• Operators can create a temporary design surface with the press of a button with quick surface creation.

Pushing with 237 hp, Komatsu’s largest HST dozer — 49,824 to 50,927 lbs. (22,600 to 23,100 kg) — helps operators maintain ground speed while operating under heavy loads in H mode.

John Deere Extends Its SmartGrade Dozer Warranty John Deere now offers an extended coverage package for and hydraulics, as well as the SmartGrade components, for machines including the 650K, 700K, 700L, 750K, 750L, its SmartGrade dozers. three years or 5,000 hours, whichever occurs first. The offer 850K, 850L, and 950K models.

Available on select models, including the new 700L, 750L is extended through June 30, 2021, and available on eligible The SmartGrade machines combine the power and perand 850L machines, the package formance of the John Deere dozers features an extended threewith a fully-integrated precision year/5,000-hour powertrain and 3D grade control solution. The hydraulic warranty on all factorySmartGrade offering integrates built SmartGrade dozers, as well as masts and cables into the machine, the SmartGrade technology comporeducing the risk of damage and nents. theft, and is fully supported by “Since launching our John Deere dealers. Additionally, SmartGrade dozers, we have seen this technology removes the need increased interest in grade control to install blade-mounted GNSS technology. Our customers are looksensors and components daily, ing for ways to make equipment reducing setup time and allowing easier to operate and more producoperators to get more work done, tive, even with less experienced according to the manufacturer. operators,” said Matt Goedert, solu“Since first introducing our tions marketing manager, John SmartGrade machines, we’ve seen Deere. more and more contractors adopt“By extending our industry-leading this technology. From skilled ing warranty, we’re not only standlabor shortages, to the need for ing behind our SmartGrade technolincreased productivity, grade conogy, but we are also instilling confitrol technology provides a solution dence in our customers that these to the many challenges our cusmachines are built to withstand tomers face daily,” said Sean challenging and demanding job Mairet, product marketing managsites.” er, John Deere.

The warranties deliver enhanced The warranties deliver enhanced coverage on the machine powertrain and hydraulics, as well as For more information, visit coverage on the machine powertrain the SmartGrade components, for three years or 5,000 hours, whichever occurs first. www.deere.com. 

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 24, 2021 • Page 59

Page 60 • October 24, 2021 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

-2 2))( 3* 6)40%')1)28 69&&)6 86%'/7#

'%00 97 83(%= 83 +)8 8,) &)78 46-') 32 69&&)6 86%'/7 =%21%6 4%687 %2( 92()6'%66 92()6'%66-%+) 4%687

;IƅVI TVSYH XLEX (SQMRMSR 6YFFIV 8VEGOW EVI XLI

7)00-2+ 69&&)6 86%'/ FVERH MR %QIVMGE %WLPERH :% "" .EGOWSRZMPPI *0 ""

'MRGMRREXM 3, "" 4SVXPERH 36 ""

ZZZ GHSSDUWV FRP

7GLIRIGXEH] 2= "" (EPPEW 8<

CHART from page 56

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

TD-8S LGP TD-9S LGP TD-15R/Ex LGP New TD-15M Series-2 LGP (Straight) New TD-15M Series-2 LGP (6-way)

94 (70) 113 (84) 209 (156)

22,707 (10,300) 24,912 (11,300) 46,451 (21,070)

Cummins QSF 3.8 Cummins QSF 3.8 Cummins QSB 6.7

213 (159)

47,480 (21,555)

Cummins B6.7

TD-8S LT TD-9S LT TD-15R/Ex (Semi-U) TD-15R/Ex (Angle) TD-15R/Ex LT (Semi-U) TD-15R/Ex LT (Angle) TD-15R/Ex WT (Semi-U) TD-15R/Ex WT (6-way PAT) TD-15 Series-2 (Semi-U) TD-15 Series-2 (Angle) TD-15 Series-2 LT (Semi-U) TD-15 Series-2 LT (Angle) TD-15 Series-2 WT (Semi-U)

94 (70) 113 (84) 206 (154) 206 (154) 206 (154) 206 (154) 206 (154) 206 (154) 213 (159) 213 (159) 213 (159) 213 (159) 213 (159)

22,046 (10,000) 24,251 (11,000) 45,767 (20,760) 45,857 (20,800) 46,098 (20,910) 46,188 (20,950) 47,211 (21,415) 46,611 (21,142) 45,660 (20,710) 45,705 (20,750) 45,990 (20,860) 46,035 (20,900) 47,530 (21,560)

Cummins QSF 3.8 Cummins QSB 3.3 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7

Crawler Dozers Non LGP

ENGINE POWER HP (KW)

JOHN DEERE

DRESSTA

Crawler Dozers LGP

MODEL

213 (159)

47,780 (21670)

Cummins B6.7

Loaders

655K 655K WH 755K 755K WH

Dozers

450K 550K 650K 650K SG 700L 700L SG 750L 750L SG 850L 850L SG 850L WH 950K

155 (116) 155 (116) 194 (145) 194 (145)

80 (60) 92 (69) 104 (78) 104 (78) 135 (101) 135 (101) 175 (131) 175 (131) 225 (168) 225 (168) 225 (168) 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 950K SG 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 950K WH 265 (198) 1050K 350 (261) 1050K WH 350 (261)

WEIGHT LBS. (KG) SG: SmartGrade

ENGINE TYPE WH: Waste Handler

40,614 (18,422) 42,120 (19 104) 45,178 (20,492) 50,675 (22 985)

JD PowerTech PVS 6068 JD PowerTech PVS 6068 JD PowerTech PVS 6068 JD PowerTech PVS 6068

17,510-18,752 (7,959-8,522) 19,758-21,000 (8,981-9,544) 21,320-22,343 (9,691-10,156) 21,320–22,343 (9691–10 156) 30,900–32,088 (14 016–14 555) 30,900–32,088 (14 016–14 555) 37,569–40,040 (17 041–18 162) 37,569–40,040 (17 041–18 162) 47,578–51,365 (21 581–23 299) 47,578–51,365 (21 581–23 299) 54,086–54,353 (24 533–24 654)

JD PowerTech PWS 4045 JD PowerTech PWS 4045 JD PowerTech PWS 4045 JD PowerTech PWS 4045 JD PowerTech PVS 6068 JD PowerTech PVS 6068 JD PowerTech PVS 6068 JD PowerTech PVS 6068 JD PowerTech PSS 6090 JD PowerTech PSS 6090 JD PowerTech PSS 6090

65,300–73,700 (29,606–33,431) 71,250–75,150 (32 325–34 100) 95,400–96,100 (43 270–43 590) 102,700–103,300 (46 600–46 850)

JD PowerTech PSS 6090 JD PowerTech PSS 6090 JD PowerTech PSS 6135 JD PowerTech PSS 6135

65,300–73,700 (29,606–33,431)

JD PowerTech PSS 6090

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 61

Contact your local dealer: ARNOLD MACHINERY CO. www.arnoldmachinery.com

Salt Lake City, UT

Sparks, NV

801-972-4000

775-356-1511

Idaho Falls, ID

Las Vegas, NV

208-523-0822

702-642-9000

Meridian, ID

Phoenix, AZ

208-887-6000

602-414-1900

Twin Falls, ID

Tucson, AZ

208-733-1715

520-294-7677

SIERRA MACHINERY, INC. www.sierraelpaso.com

El Paso, TX

Artesia, NM

915-772-0613

575-746-6592

ROMCO EQUIPMENT CO. www.romco.com

Austin

Ft. Worth

Round Rock, TX 512-388-2529 877-851-1026

Ft. Worth, TX 817-626-2288 866-966-4602

Buffalo

Houston

Buffalo, TX 903-322-5602

Houston, TX 713-937-3005 800-865-6998

Carmine Carmine, TX 979-278-3570

Corpus Christi

Longview Longview, TX 903-758-5576

Corpus Christi, TX 361-881-4891

Rio Grande Valley

Dallas

Mercedes, TX 956-565-0100

Carrollton, TX 214-819-4100 800-227-6626

San Antonio San Antonio, TX 210-648-4600 800-966-4601

ASCO EQUIPMENT www.ascoeq.com

Abilene, TX

Perryton, TX

325-698-2726

806-435-7773

Amarillo, TX

Clovis, NM

806-372-8386

575-742-2726

Lubbock, TX

With a wheel loade loader er this good, d,

806-745-2000

PACWEST MACHINERY www.PacWestMachinery.com

Spokane Valley, WA 509-534-5933

Portland, OR

Eugene, OR 541-302-3762

Kent, WA 206-762-5933

503-252-5933

VOLVO CONSTRUCTION EQUIPMENT & SERVICES www.vcesvolvo.com

Bakersfield, CA 661-387-6090

Corona, CA 951-277-7620

Fresno, CA 559-834-4420

Lakeside, CA 619-441-3690

GO AHEADD AND BRAG A LIITTLE.

San Leandro, CA 510-357-9131

Turlock, CA 209-410-6710

Sacramento, CA 916-504-2300

Volv olvo wheel loaders offer more — more power, more fuel efficiencyy,, more uptime and more profit. Spend less and earn more with a versatile, durable and capable Volvo machine on the job. Learn more at your nearest dealer location.

Page 62 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ensuring Quality, Speedy Projects With Instant Moisture Measurement

By Del Williams SPECIAL TO CEG

Reduced strength also can become an issue with hot, dry weather, which can shorten the hydration portion of the curing process (when water is absorbed and crystals form in the concrete). Then the concrete mixture has less time to hydrate these forming crystals and create strong compressive strength. So, concrete curing in hot weather can suffer from limited strength and durability.

On the other hand, in wetter seasons, excess moisture can do a great deal of damage to concrete and its protective coatings, as well as affect concrete-water ratios. Because concrete is porous, issues arise when water is trapped within the concrete.

When it comes to structural concrete, including foundational slabs, construction contractors do not want to “guestimate” moisture levels, which can potentially jeopardize the whole project.

In the construction industry, the quality of cast-in-place concrete foundations, superstructure, slabs, stairs and architectural features, along with the speed of project completion, can largely depend on getting moisture measurement right — and the same is true with the masonry mortar used to build brick, block or stone walls.

Water is an essential element of both concrete (i.e. water, aggregate, cement) and mortar (i.e. water, aggregate, binding material). However, at the job site, everything from seasonal temperature, rain, humidity and groundwater to circulating air can affect the moisture content in concrete and mortar greatly. This can impact setting and drying time — and incorporating the wrong moisture levels in concrete and mortar can be disastrous to quality, finish, The Benefits of Simplified longevity and even safety.

Moisture Measurement Although the construction Although traditional laboratory industry has access to moisture and online based moisture measmeters, to some extent, these tools urement techniques are useful in typically require calibration, samthe right settings, they have lacked pling and time. In addition, they the simplicity and flexibility are not always portable or durable required for frequent spot checks enough to be used on job sites. on construction sites. Because Fortunately, hand-held, durable, Hand-held, durable, instant moisture meas- such moisture tests are too slow, devices are now available that laborious, and alter or destroy the instant moisture measurement urement allow anyone without special training to devices are now available that spot check concrete and mortar at the job sample, they are not practical for allow anyone without special train- site to assure that it is properly mixed, set the job site, where concrete or ing to spot check concrete and mor- and dry. mortar must stay in place. Instead, tar at the job site to assure that it is what is needed is a fast, easy properly mixed, set and dry. In many cases, such pre-cali- method to determine moisture content. brated systems allow non-destructive, non-invasive testing So, industry innovators have developed a simplified approach on digital displays with no pin holes or discoloration. This with testing equipment that allows anyone in the field to get labapproach facilitates construction work as soon as feasible, oratory-quality measurements in any environment. speeds project completion and improves quality.

As an example, using a hand-held device such as the HI520-2 concrete and mortar moisture meter by Kett, the How Seasonal Heat, worker would select the calibration (i.e. concrete or mortar), Moisture Can Affect Concrete press it against the sample, and moisture is immediately disConcrete-water ratios can make a big difference in the per- played with accuracy of +/-0.5 percent (0-12 percent for conmeability of concrete, but air humidity and summer heat also crete/0-15 percent for mortar). Automatic temperature comcan affect the rate at which moisture migrates through drying pensation enhances measurement accuracy, and two “raw” concrete. modes allow the user to calibrate for deep or shallow sam“High humidity can increase the risk of fractures and other ples. Up to 1,000 measurements can be stored in memory structural issues. Concrete can also gradually change from and downloaded to a PC for analysis. ductile to brittle when humidity decreases, which naturally The device utilizes high-frequency capacitance, comparoccurs when summer heat affects concrete’s evaporation ing the di-electric constant of the solid with water. A direct time,” said John Bogart, managing director of Kett US, a relationship exists between this and moisture content. manufacturer of a full range of moisture and organic compoAccording to Bogart, one construction contractor used the sition analyzers. moisture meter to confirm that the concrete flooring on a 20He noted that concrete cures best between 70-80 F, so if story building was ready for custom surface treatment. In temperatures rise above that and climb toward 90 F, concrete fact, the contractor was able to test the entire project in one can be affected and cause surface problems as well as morning. reduced strength.

“With an instant moisture meter, flooring installers can Hot weather, wind and dry conditions can increase a con- test concrete humidity as water passes through the concrete’s crete slab’s rate of evaporation, which can threaten the surface even after it hardens.or degradation of its strength integrity of the top layer of concrete. Water quickly evapo- and integrity,” said Bogart. rates from the surface layer, which can cause the mix to be For more information, call 800/438-5388, email supdrier and susceptible to surface cracking and shrinkage. port@kett.com or visit www.kett.com. 

Kirby-Smith Machinery www.kirby-smith.com 6715 W. Reno Ave Oklahoma City, OK 73127 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 800-375-3733

Amarillo, TX 800-283-1247 Lubbock, TX 866-289-6087 Odessa, TX 877-794-1800

Abilene, TX 877-577-5729

Tri-West Tractor, Inc. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200

Ditch Witch of East Texas www.witchequipment.net 7717 Highway 69 Tyler, TX 75706 903-592-6226

Ditch Witch of Arizona www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351 Tucson, AZ 520-579-0261

Equipment Share www.equipmentshare.com 295 S Redwood Rd North Salt Lake, UT 84054 385-229-2560 • 385-377-3074

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 63

Waukesha-Pearce Industries, Inc.

Garton Tractor Inc.

Power MotiveCorporation

www.wpi.com

www.gartontractor.com

www.powermotivecorp.com

12320 South Main St. Houston, TX 77035 713-551-0506 Tomball, TX 281-351-9016 Corpus Christi, TX 361-884-8275 San Antonio, TX 210-648-4444

Beaumont, TX 409-721-5305 Edinburg, TX 956-386-0107 Austin, TX 512-251-0013 Buffalo, TX 903-322-7150

4088 Russell Road Fairfield, CA 94534 707-425-9545 Santa Rosa, CA 707-586-1790 Ukiah, CA 95482 707-468-5880

DENVER HEADQUARTERS 5000 Vasquez Blvd.

Denver, CO 80216 303-355-5900

Milliken 970-587-1188

Colorado Springs 719-576-5541

Cheyenne 307-634-5149

Grand Junction 970-241-1550

Durango 970-259-0455

Nueces Power Equipment www.nuecespower.com 4697 FM 1516 N Converse, TX 78109 210-310-0066 7667 N Sam Houston Pkwy Humble, TX 77396 713-247-0066

Page 64 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PERFORMANCE WHERE IT COU C NTS TS

www.andersonmachinerytexas.com

FINANCING

A LOW AS AS

0%

Austin, TX

Odessa, TX

(512) 272-8133

(432) 561-8933

Corpus Christi, TX

San Antonio, TX

(361) 289-6043

(210) 661-2366

Pharr, TX

Victoria, TX

(956) 781-5995

(361) 575-8111

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 65

457 | WHEEL LOADER

www.ProConJCB.com 461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON 5050 East 58 Avenue Commerce City, CO 80022 1-844-JCB-IRON 2240 W. Buckeye Road Phoenix, AZ 85009 1-844-JCB-IRON

www.swjcb.com 2935 Lincoln Road Las Vegas, NV 89115 702-432-2200

Cisco Equipment www.cisco-equipment.com 620 N. Bell Street San Angelo, TX 76903 800-496-0271 2707 Slaton Hwy Lubbock, TX 79404 806-745-9595 1706 S 1st Street Artesia, NM 88210 575-748-1314

JCB wheel w loaders are fully loaded with innovate vate features.

520 SE Loop 338 Odessa, TX 79762 432-367-9181

JCB wheel el loaders deliver the power power, r,, to torque, orque, and payload capacity youu need for real-world d applications. With an engine that requires no DPF F,, and easy service accessibility with a sing gle piece hood, the JCB wheell loader range saves you time and nd money, moneyy,, making it single a must must-have have ave on any job-site. job site.

Learn mo ore about JCB wheel loaders at www.jcb.com www.jcb.com or contact yourr local dealer today. todayy.. more

YOUR FAMILY OF LOCAL L JCB DEALERS

/JCBNA

@JCBNA

JCBN JCBNA 4740

Page 66 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Estimate Timing to Order Materials OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT

www.oklahomaterritoryequipment.com Oklahoma City, OK 405-917-9191 Tulsa, OK 918-835-7200

www.gartontractor.com

Garton Tractor Inc.

2400 N Golden State Blvd. • Turlock, CA 95382 209-632-3931 Fairfield, CA • 707-425-9545 Merced, CA • 209-726-4600 Modesto, CA 95356 • 209-538-0911 Newman, CA • 209-862-3760 Santa Rosa, CA • 707-586-1790 Stockton, CA 95206 • 209-948-5401 Tulare, CA 93274 • 559-686-0054 Ukiah, CA 95482 • 707-468-5880

Some in the construction sector say the biggest culprits in industry volatility are coronavirus lockdowns and restrictions, business closures, higher-than-expected demand and a reduction of workforce in the industries that produce and distribute needed materials.

CHALLENGES from page 52

it may be as simple as the parties recognizing potential volatility and negotiate a mutually acceptable price escalation clause.”

This approach, they said, should include identifying specific materials or material categories that may be at risk for significant volatility. “If possible, identifying suppliers for these ‘atrisk’ materials that will provide fixed pricing for a fixed period of time.”

Define volatile pricing, suggested Pebworth and Stack in an article for JD Supra, and pre-order materials when it’s feasible. Account for storage costs, or course. Anticipate the potential impact for future projects under current conditions.

Their other suggestions: Discuss use of a contingency line item for raw materials and consider bailateral flexibility. “If the owner shares the risk of price increases, then the owner should also share the benefit if prices come down unexpectedly,” they said.

“Unanticipated material delivery delays and product shortages will require similar flexibility. A shortage of material transportation resources may be a long-lasting outcome in the postpandemic construction economy.”

At negotiation time, owners, contractors, subcontractors and suppliers need to consider all these issues in the wake of COVID-19 and other unanticipated events that have occurred over the past year, said the attorneys. Price volatility and related delivery delays of construction materials will likely

remain for the foreseeable future.

“As with many issues, open and honest communication during contract negotiations surrounding issues that may arise on a project not only fosters a good working relationship, it can also avoid unnecessary costs, delays and disputes on the back end of a project,” they added.

Reframing Outcome AGC reported that another round of price increases and supply-chain disruptions have resulted in further hardships on contractors. They’re not only driving up construction costs, but slowing down progress on projects.

Additionally, more than threefourths of construction firms have indicated projects are being postponed or canceled because of unavailable materials or cost overruns, while only one out of five firms reported winning new work in the previous two months.

Circumstances like these are catalysts for unfavorable outcomes in the construction industry, said Collin of Firmo Construction. As a result, many local general contractors are proposing project bids with higher estimates. The general conclusion is that contractors are trying to balance out losses due to the pandemic, leading to a hike in cost.

“In actuality, however, it’s quite the opposite,” he said. “Contractors are trying to balance the surge in need for construction services while accounting for the matter of not only rising material costs and material delays, but also

labor shortages in the industry.”

Reimagining supply chains could be a way to build resilience and head off disruptions, said Collin. He laid out solutions contractors can implement to diminish the negative effects of the industry’s perfect storm.

“Some ways contractors can address these obstacles include introducing innovative methodologies and expanding their thinking beyond the construction site,” he said.

One technique he favors is prefabrication. The strategy utilizes components made off site and assembles them together on site. It can be applied to full structures as in modular construction, or to materials such as cross-laminated timber.

Collin pointed out that at a time when cost is critical, reimagining supply chains is another viable solution.

“One way is to prepare for disruptions.

Now is the perfect time for companies to build resilience into their operations to be better prepared for any type of future disruption,” he said.

“There’s an ideal opportunity to build that resilience on multiple fronts if industry leaders are restructuring their value chain from end to end,” he added.

These opportunities range from reevaluating business models and building efficient industrial supply chains, to building manufacturing and distribution facilities to help alleviate vulnerabilities the pandemic brought to light in the just-in-time supply chain, he said.  CEG

www.clmequipment.com

CLM EQUIPMENT CO. INC. Lafayette, LA 337-837-6693 Lake Charles, LA 337-625-5942 Houston, TX 281-598-2500

www.banemachinery.com Dallas, TX 800-594-2263 Ft. Worth, TX 800-601-2263 Tyler, TX 800-594-2200

BANE MACHINERY INC.

Columbiawesternmachinery.com 11125 SW Tonquin Road Sherwood, OR 97140 503-454-0902

COLUMBIA WESTERN MACHINERY

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 67

Cooper Equipment Co. www.cooperequip.com 201 Commerce Blvd.

Georgetown, TX 78626 512-930-5151

TRI-WEST TRACTOR, INC. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200

Westrax Machinery www.westraxmachinery.net

Dealer Im mprint Area19618 S. Susana Rd. Rancho Dominguez, CA 90221 800-411-4717

Shafer Equipment Company, Inc. www.shaferequipmentco.com 955 Greg Street • Sparks, NV 89431 775-235-4069

19885 Temescal Canyon Rd Corona, CA 92881 800-411-4717

APCO EQUIPMENT www.apcoequipment.com 3432 N 5th Street North Las Vegas, NV 89032 800-574-4089

BEARD EQUIPMENT CO. www.beardequipco.com 4509 I-20 • Midland, TX 79706 432-694-4530

611 N. Golden Key St. Gilbert, AZ 85233 602-397-8173

Rasmussen Equipment Co. www.raseq.com 3333 West 2100 South West Valley City, UT 84119 801-972-5588

Page 68 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors!

Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): ALL MODELS KOMATSU WHEEL LOADERS - WE NEED TO BUY KOMATSU WHEEL LOADER WA-600-3, WA-600-6, WA-30, WA-40, WA 50. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: PONTO2002EG@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE INTERESTED IN BUYING JOHN DEERE EXCAVATORS 790, 495 & 595 AND HITACHI EXCAVATORS EX 270-1, EX 270-5, EX 300-1, EX 400-1 AND EX 450-5.

EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE INTERESTED TO BUY CAT USED WHEEL LOADER 916, 926, 936, 950B/E, 966E/D/F, 970F, 980C, 980F. IF AVAILABLE PLEASE EMAIL US: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE LOOKING TO BUY A COUPLE OF UNITS OF HITACHI EXCAVATORS EX 330-5 & EX 450-5. IF YOU HAVE ANY OF THEM AVAILABLE PLEASE LET ME KNOW THROUGH EMAIL EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR MOTOR GRADERS - WE ARE INTERESTED TO BUY CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 ––––––––––––––––––––––––––––––––

WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,3005 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CATERPILLAR WHEEL LOADERS. WE ARE LOOKING TO BUY CAT 966F, CAT 966FII, CAT 980C, AND CAT 980F. EMAIL: AHMED@IUKANDCO.COM: PHONE: 300-369-5360 –––––––––––––––––––––––––––––––– WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 1993-1995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE..

MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410. EMAIL: DEANDRS@VWERIZON.NETR; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5.

EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 –––––––––––––––––––––––––––––––– WANTED (WV): NELSON 6000 WELDERS - LOOKING FOR NELSON DUAL GUN SYSTEM WITH GEN SET AND TRAILER, AND/OR PRO-WELD DUAL GUN ARC 3000 MACHINE. EMAIL: WEH@TRIANGLEINCORPORATED.COM; PHONE: 304-562-6282 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CHALLENGER 85C TRACTORS - I AM IN NEED OF A USED SET OF TRACKS FOR ANY OF THE CAT CHALLENGER 65, 75 OR 85C. EMAIL: PI2279@YAHOO.COM; PHONE: 319-470-8388 –––––––––––––––––––––––––––––––– WANTED (MA): ALL MODELS CATERPILLAR EXCAVATORS - LOWER SUPPORT RAIL GOES FRONT TO BACK RIGHT SIDE AND TOOL BOX RH SIDE LOWER RAIL THAT GOES FRONT TO BACK SUPPORTING TOOL BOX. EMAIL: BILLD@TDICENZO.COM; PHONE: 207-214-9610 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS - LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX270,EX300,EX330,EX400,EX450.

EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE LOOKING FOR CAT 966F, CAT 980C, CAT 980F AND CAT 966E/D. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CRAWLER DOZERS - LOOKING FOR D5B, D6C OR D6D. WILLING TO DO SOME WORK ON THEM IF NEEDED, EVEN PARTS MACHINE. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET PHONE: 317-439-7306 –––––––––––––––––––––––––––––––– WANTED (CT): ALL MODELS DYNAPAC LAND ROLLERS - WANTED GALLION STATIC PAVING ROLLERS EMAIL: JPICT@AOL.COM ––––––––––––––––––––––––––––––––

WANTED (NJ): CASE BACKHOE LOADERS, MODEL 580SK, 580L, 580LII, 580SL, 580SLII, 580M, 580MII, 580MIII 580SMII, 580SMIII, 580SMIII EMAIL: FRANKHORAN@GROFFTRACTOR.COM; PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY USED HITACHI EXCAVATORS EX200LC, EX270, EX300, EX330, EX400, EX450.

EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODELS. I NEED TO BUY CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES).

EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 ––––––––––––––––––––––––––––––––

WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP ..

ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!!

EMAIL: BBENEDETTO @ COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450.

EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 ––––––––––––––––––––––––––––––––

WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S-3 OFF-HIGHWAY TRUCKS LOOKING FOR REAR END DIFFERENTIAL FOR 30 TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100.

EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 69

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Online Thurs., October 28, 2021 For: Late Model Construction Equipment & more (Mexico) • Newport, VT Fri., October 29, 2021 For: 1-Owner Very Good Construction Equipment • Edison, NJ Sat., October 30, 2021 For: Paving, Construction & Utility Equipment & more • Syracuse, NY Fri., November 5, 2021 For: Construction & Utility Equipment & more • Syracuse, NY Sat., November 6, 2021 For: Large Rental Return Construction Equipment & more • Palermo, NY Sun., November 7, 2021 For: Construction & Utility Equipment & more • Victoria, TX Tues., November 9, 2021 For: Late Model Construction Equipment & more • Houston, TX Wed., November 10, 2021 For: Partial Liquidation of General Contractor & Rental Fleet • Barnesville, OH Wed., November 17, 2021 For: Major Job Completion E.T.I. RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only!

• Edmonton, AB October 26-28, 2021 • Decatur, AL November 3, 2021 • Orlando, FL November 4, 2021 • Houston, TX November 9-11, 2021 • Orlando, FL November 17-18, 2021 • Tipton, CA November 19, 2021 • Las Vegas, NV November 23, 2021 • Truro, NS December 2, 2021 • Southeast Regional Event December 3, 2021 • Fort Worth, TX December 7-8, 2021 • Phoenix, AZ December 8, 2021 • Sacramento, CA December 8, 2021 • Great Plains Regional Event December 9, 2021 • Las Angeles, CA December 10, 2021

• Northeast Regional Event December 14-15, 2021 • Montreal, QC December 14-15, 2021 • Chehalis, WA December 15, 2021 AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401 • ONLINE October 18 - 24, 2021 • ONLINE October 25 - 31, 2021 • ONLINE November 1 - 7, 2021 • ONLINE November 8 - 14, 2021 • ONLINE November 15 - 21, 2021

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864

• Philadelphia, MS November 17 - 18, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction

• Live Virtual Online November 18, 2021 For: Heavy Equipment

• Lumberton, NC Tues., December 28, 2021 For: 27th Annual Construction, Truck, Farm Auction

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

MIDEAST EQUIPMENT AUCTIONS www.mideastequip.com 860-370-9993

• Online Only December 2 - 9, 2021 For: Kenmore Heavy Equipment, Contractors Equipment, Trucks & Vehicles

• Bridgeport, CT Tues., November 16, 2021 For: End of the Year Contractors’ Auction

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• ONLINE November 22 - 28, 2021 BAR NONE AUCTION www.barnoneauction.com 866-372-1700

• Pendleton, IN Fri., December 10, 2021 For: 29th Annual Snowball Auction

• ONLINE Fri., November 19, 2021 For: Woodburn, OR Equipment Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE October 26, 2021 • ONLINE November 2, 2021

• ONLINE November 23, 2021 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE October 27, 2021 • ONLINE November 3, 2021 • ONLINE November 10, 2021 • ONLINE November 17, 2021 • ONLINE November 24, 2021 BLACK STAR ACA www.blackstaraca.com 800-610-2192 • Live Virtual October 27, 2021 • Live Virtual November 17, 2021

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311 • Ashland, KY November 18 - 19, 2021 For: Webcast: Surplus CW Electric Inc.

HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012

• Online October 25, 2021 For: Estate Hobby Farm & Collectibles

• Timed Online Ends October 26, 2021 For: Jones Construction Equipment, Pine City, MN

• Gillsville, GA October 26, 2021 For: Contractor Inventory Reduction Auction

NITKE AUCTIONS www.nitkeauctions.com 715-539-6295

• Online Oct. 27 – Nov. 2, 2021 For: Absolute Retirement. Light Construction, Tools & more

• Mosinee, WI October 28 - 29, 2021 For: 56th Annual Wisconsin Contractors Fall Auction

• Shakopee, MN October 28, 2021 For: Material Handling Equipment Warehouse Liquidation

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., December 10, 2021 For: Truck, Trailer & Equipment Auction

• ONLINE November 9, 2021 • ONLINE November 16, 2021

LlOYD MEEKINS & SONS AUCTION CO. www.meekinsauction.com 910-739-0547

DEANCO AUCTIONEERS www.deancoauction.com 601-656-9768

• Muncie, IN Tues., November 9, 2021 For: United Construction Services, Inc.

• ONLINE Sat., November 13, 2021 For: Sacramento, CA Equipment Auction

• Douglasville, GA Wed., November 10, 2021 For: Atlantis Commercial Group Inc Fleet Realignment Auction

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Online Only Wed., October 27, 2021 For: Heavy Equipment, Truck, Trailer Auction • Online Only Wed., December 1, 2021 For: Heavy Equipment, Truck, Trailer Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Online Only – Timed Tues., October 26, 2021 For: Public Equipment Auction • Online Only – Timed Thurs., October 28, 2021 For: First Capital • Online Only – Timed Tues., November 2, 2021 For: Public Equipment Auction • Online Only – Timed Tues., November 9, 2021 For: Public Equipment Auction

• Newton, NH Sat., November 6, 2021 For: Northeast US Live & Online Public Auction • Roachdale, IN Sat., November 6, 2021 For: Estate of Kenneth Gross • Online November 3 - 9, 2021 For: Glade & Grove Supply Inventory Reduction • Online November 3 -10, 2021 For: Tool & Business Liquidation • Online November 5 - 15, 2021 For: Early Winter Commercial Turf & Golf Online Auction • Brooklyn, MS November 12 - 13, 2021 For: Two Day Construction & Transportation Live & Online JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Carrollton, GA Sat., November 6, 2021 For: William Garrett Retirement Auction

• ONLINE Tues., October 26, 2021 For: Government Auction • ONLINE Wed., October 27, 2021 For: Ag Equipment Auction • ONLINE Thurs., October 28, 2021 For: Truck & Trailer Auction • ONLINE Thurs., October 28, 2021 For: Nygaard Industrial Retirement Auction • ONLINE Wed., November 3, 2021 For: Vehicle & Equipment Auction • ONLINE Thurs., November 4, 2021 For: Construction Equipment Auction SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Bloomfield, CT Thurs., November 4, 2021 For: King Construction Inc. Complete Dispersal Retirement Auction

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online October 19 - 26, 2021 For: Jerome Trucking Equipment Reduction Auction • Timed Online October 21 - 28, 2021 For: Dirt Dynamics Inventory Update Auction • Timed Online October 21 - 28, 2021 For: Loren Jepson Construction Equipment Auction • Timed Online November 5 - 10, 2021 For: Online Steffes Auction Upper Midwest Locations • Timed Online November 19 - 24, 2021 For: Online Steffes Auction Upper Midwest Locations • Timed Online Nov. 29 – Dec. 8, 2021 For: Brian Paumen Estate Auction • Timed Online December 8 – 15, 2021 For: Steffes Construction Consignment Auction • Mt. Pleasant, IA December 16, 2021 For: AgIron Mt. Pleasant Event VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Lake Elsinore, CA Sat., November 13, 2021 For: Heavy Construction Equipment and more WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Online Fri., December 3, 2021 For: Online & Absentee Bidding Only WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Sat., November 13, 2021 For: Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Kissimmee, FL Thurs., November 3, 2021 For: Unreserved Public Auction • Mt. Sterling, KY Thurs., November 11, 2021 For: Fall Kentucky Auction

Page 70 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Buying or Selling?

Call any of these professional auction companies

Why Use Iron Bound?

That’s easy...

It’s SIMPLE and EFFECTIVE! We’ll market and sell your equipment, get top dollar for you and we’ll take the hassle out of the process.

A Strategic As sset Managemen nt Full Service e Auction House

THE T TIME IS NOW W

Conveniently located for sellers in the Permian Basin, West Texas, the Panhandle & New Mexico.

Address: Iron Bound Solutions LLC 750 US HWY 180 Seminole, TX 79360

vantageauctions.c com

Phone: 432-209-5112

951.228.90040

Ritchie to Buy SmartEquip The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

SEE YOUR BARGAIN AD IN COLOR.

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices!

Call Company Wrench for Sizes & Pricing Call 866-294-6103 21-22 EB

ONLY $60 EXTRA FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $135 per ad, $60 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

Ritchie Bros. Auctioneers and SmartEquip announced that they have entered into a definitive agreement under which Ritchie Bros. will acquire SmartEquip for approximately $175 million.

Completion of the acquisition is subject to customary closing conditions, including, among other conditions, the expiration or termination of the applicable waiting period under the Hart-Scott-Rodino Antitrust Improvements Act of 1976, as amended.

“This acquisition furthers our goal of providing the best experience for our customers as we continue our transition from a traditional auctioneer to a marketplace for insights, services, and transaction solutions for commercial assets,” said Ann Fandozzi, chief executive officer, Ritchie Bros.

SmartEquip is a multi-manufacturer platform that provides customers with real-time service and diagnostic support, dynamically customized, via serial number, to each asset in their fleet, as well as enabling the electronic procurement of parts from OEMs and their dealers.

“Ritchie Bros. is a perfect partner for us, with over 60 years of experience and a global footprint,” said Bryan Rich, SmartEquip’s executive chairman. “Through their global customer base, this merger will accelerate

SmartEquip’s ability to support its rapidly growing footprint across our joint global marketplaces and engaged customer base.”

Under the terms of the transaction, Ritchie Bros. will acquire 100 percent of the equity of SmartEquip for approximately $175 million subject to adjustment.

Strategic Rationale for Acquisition • Enables Better Customer and Partner Experience — the combination of SmartEquip and Ritchie Bros. will enable and accelerate adoption of parts and service sales on behalf of our dealer and OEM partners by providing a seamless experience for end users • Accelerates the Execution of our Strategy — This highly complementary acquisition builds on Ritchie Bros.’ vision of becoming a trusted global marketplace for insights, services and transaction solutions for commercial assets • Deepens IMS Connectivity — SmartEquip will deepen IMS (inventory management system) connectivity and will further enable digital solutions at scale around inspections and ancillary services, while enabling better optimization of search and advertising revenue streams For more information, visit RitchieBros.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 71

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com.

OCTOBER/NOVEMBER 2021 CRANE SAFETY COURSES October 25 – October 29, 2021 Mobile Crane Train The Trainer, Orlando, FL October 26 – October 28, 2021 Rigging Inspector Training, Cincinnati, OH October 26 – October 29, 2021 Mobile Crane Inspector Training, Houston, TX November 1 – November 5, 2021 Overhead Hoist Maintenance Training, Orlando, FL November 1 – November 5, 2021 Mobile Crane Operator Training, Houston, TX November 2 – November 5, 2021 Overhead Crane Inspector Training, Cincinnati, OH November 8 – November 12, 2021 Mobile Crane Train The Trainer, Houston, TX November 9 – November 12, 2021 Mobile Crane Inspector Training, Orlando, FL November 10 – November 12, 2021 Qualified Rigger Level 2 Training, Cincinnati, OH November 16 – November 18, 2021 Rigging Inspector Training, Houston, TXL November 16 – November 19, 2021 Overhead Crane Train The Trainer, Orlando, FL November 17 – November 18, 2021 Overhead Crane Operator Training, Cincinnati, OH November 22, 2021 Qualified Rigger Level 1 Training, Houston, TX To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238.

Direct: 321/710-4641. Email: talston@cranesafe.com SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION (SMACNA) 2021 SMACNA Annual Conference Dates: Octoberr 24 – 27, 2021 Location: Marriott World Center, Maui, Hawaii The 2021 SMACNA Annual Convention is being held in person October 24-27, 2021 in Maui, Hawaii. This year will be different in many respects, yet we will find comfort in the high-quality networking and educational experience members have come to expect. Almost all differences experienced this year will be a result of a higher focus on safety in accordance with hotel, local and state mandated policies.

Registration is now open!

SMACNA exists to address issues common to member firms that impact the industry nationally and internationally. The association serves members' needs to improve their business environment through industry education, labor relations, standards, industry representation and business studies.

For more information and to register, visit http://www.smacna.org/.

ASSOCIATON GENERAL CONTRACTORS OF AMERICA (AGC) Federal Contractors Conference: Part 2 (In-Person) Date: November 8-9, 2021 Location: Ritz-Carlton Hotel Washington, DC Description: AGC is excited to announce that we will be hosting the 2021 Federal Contractors Conference November 8 - 9, 2021 in Washington, D.C. at The Ritz-Carlton. Our primary focus is the health and safety of our conference participants.

We greatly appreciate your support of this conference.

The latest project forecasts, expert insight on upcoming regulatory hurdles, and ample networking opportunities with agency decision makers are critical to being competitive in the federal construction market.

Unlike other events, the AGC Federal Contractors Conference brings federal agencies directly to the table alongside attendees to generate more candid dialogue and fewer generic presentations. In addition to agency budget and policy overviews, the conference focuses on addressing specific issues facing the construction industry and particular agencies from public-private partnerships to source selection; multiple award contracts to small business; and design-build to bonding.

The conference is not a “one and done” event. It serves as part of an ongoing dialogue that AGC members and federal agency personnel continue throughout the year. Attendees are encouraged to take part in that dialogue with AGC.

Registration is now open.

Price (Members): $525 // Price (Non-Members): $685 (Students – Please contact meetings@agc.org to take advantage of the student discount and register for $100) For more information and to register, visit https://fedcon.agc.org/ ASSOCIATION OF EQUIPMENT MANUFACTURERS (AEM) 2021 AEM Annual Conference Dates: November 10-12, 2021 Location: JW Marriott Phoenix Desert Ridge Resort & Spa 5350 E Marriott Dr, Phoenix, AZ 85054 The Association of Equipment Manufacturers (AEM) 2021 Annual Conference delivers a single place for you to gather with your peers to examine what this transformational decade will mean for your organization and the equipment manufacturing industry.

Top reasons to attend: Networking and direct conversations • As always, there will be opportunities for crucial networking, but also discussions with suppliers, peers and subject matter experts that help us prepare for the new landscape our industry faces.

• Feedback from your customers This year, we are offering roundtable discussions with OEMs and end-users. In these roundtables, we will address the most important and relevant data on the future of the industry in a space where customers can provide honest input and exchange ideas for improvement and action.

• Industry perspectives on today and tomorrow A full schedule of insightful sessions, small-group roundtables, and candid conversations with CEOs who are shaping the equipment manufacturing industry right now and in the future.

Topics will include culture, sustainability, corporate responsibility, leadership and the post-covid workforce, just to name a few.

Registration is now open!

Please contact Carla Mann at cmann@aem.org or (414) 2984162 if you have any questions..

For additional information and to register, visit https://www.aem.org/events/conferences-and-webinars/annual-conference.

MINNESOTA ASPHALT PAVEMENT ASSOCIATION (MAPA) 2021 Minnesota Asphalt Conference Date: December 2, 2021 Location: Minneapolis Marriott Northwest (formerly Northland) 7025 Northland Dr. North, Minneapolis, MN 55428 Description: MAPA members are committed to the state and its overall quality of life. The industry is comprised of companies ranging from small driveway – paving operations to diverse larger construction companies that produce and/or place asphalt pavement on roads, airports, parking lots, recreational facilities, etc.

It is MAPA's mission to serve our members by advancing the technology of asphalt pavement to their customers. We strive to accomplish this mission with our staff of Professional Engineers by providing technical assistance, training, and consultation.

Join us at the Minneapolis Marriott Northwest to hear from our expert speakers on topics you don't want to miss!

Registration is now open.

Online registration is open through December 2.

For more information, please visit https://asphaltisbest.com/.

Contact MAPA Staff at info@mnapa.org.

WORLD OF ASPHALT (WOA) 2022 World of Asphalt Show & Conference Dates: March 29-31, 2022 Location: Nashville Music City Center 201 Fifth Avenue South Nashville, Tennessee 37203 Description: World of Asphalt is the leading asphalt trade show and conference. Industry manufacturers and service providers in the aggregate, asphalt, pavement maintenance, and traffic safety industry sectors come together to showcase their latest products and technologies.

500 Exhibitors 120 Education Sessions Co-Located with AGG1 Registration is COMING SOON!.

Tickets for World of Asphalt 2022 will be available in the fall of 2021.The standard price to attend World of Asphalt is $80.

We offer discounted rates leading up to the show. Education and bundling packages are also available.

Visit https://www.worldofasphalt.com for more information.

Events are subject to change, check websites for updates

Page 72 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Industry Professionals Gather at Latest Utility Expo When Matt Druckenmiller of Multi Machine Inc. (a company that rents tracked crawler carriers across the United States) had a customer who wanted to put a concrete mixer on a tracked vehicle, he was determined to find a way to get it done. He worked with McNeilus Truck & Mfg. Inc. (a concrete mixer company) and Prinoth, a leader in the manufacturing of tracked carriers, to produce the solution, which is now a standard offering from Prinoth. (L-R): Clint Glunz and Kevin Dunn, both of McNeilus Truck & Mfg. Inc.; Matt Druckenmiller of Multi Machine; and Eric Steben of Prinoth.

(L-R): John Millsaps, Barry Ferrell, Kris Binder, Jeff Platzke and Allen Patterson of Hydrema US kept quite busy showcasing their latest products.

U A Link-Belt 145 excavator equipped with an Engcon tiltrotator demonstrated with a host of attachments is quickly changing the way contractors have traditionally viewed attachments and coupling systems.

Vermeer Corporation’s Peyton Boyle (R) draws a crowd as he goes over features of some of the many Vermeer products in his company’s exhibit area.

Kevin Thieneman (L), chairman of LiuGong North America, and Chris Saucedo, LiuGong’s vice president and general manager, were out at the Utility Expo promoting their products and meeting with press representatives to introduce a host of new offerings from LiuGong.

The largest, most powerful, compact tracked loader on the market today — the new Case TV 620B with a huge 1 ¼ -yd. bucket — was a real show stopper.

Hyundai’s Ted Steinkamp (L) and the oneand-only social media influencer Mr. Dirt Perfect (Mike Simon) address the crowd during a fun-filled final day of the show.

Allu, long known for its excavator screening bucket, held live demonstrations of the new excavator crushing bucket that was originally introduced at ConExpo.

tility professionals were in the operator’s seat Sept. 26 to Sept. 28, 2021 in Louisville, Ky., as the Utility Expo brought the industry back together.

Organizations from across the country, including Duke Energy, CenterPoint Energy, Michels, Intren and Henkels & McCoy Inc., sent representatives ranging from CFO, COO, executive vice president, fleet and asset and equipment purchasing, to view specialized exhibits and product unveilings, participate in hands-on test drives and demonstrations, learn about the latest innovations in the industry and make purchasing decisions.

The 2021 installment of the Utility Expo was the largest in the show’s history, with more than 950 companies spread across more than 1.4 million net sq. ft. (32-plus acres) of the Kentucky Exhibition Center.

“Given the extraordinary circumstances around in-person events, we were excited to be able to produce the Utility Expo and bring a diverse lineup of thousands of products to over 16,500 attendees,” said John Rozum, show director of the Utility Expo.

Dave Hughes, vice president of global sales of McElroy Manufacturing Inc. and 2021 show chair, echoed Rozum’s comments.

“It was significant to be able to safely and successfully operate the Utility Expo this year,” said Hughes. “The new and expanded show layout, fabulous weather, innovative products and technologies and engaged crowds all contributed to a very successful event.

“The networking opportunities at the Utility Expo are invaluable for attendees and fellow exhibitors,” Hughes added. “As an organization, we can provide customized solutions for our customers’ challenges. But if those customers need something we cannot provide, we can refer them to an organization who can help them, and those connections can only come at events like the Utility Expo.”

Jamie Gardner, brand manager of trade shows and events of Milwaukee Tool, said they weren’t sure what to expect, but the show did not disappoint.

“We are thrilled with the number of decision makers who are at the show and the engaging conversations we were able to have,” said Gardner. “The number of leads we were able to acquire exceeded our expectations and we are looking forward to 2023.”

The Utility Expo will return to Louisville and the Kentucky Exposition Center Sept. 26 to 28, 2023.  CEG (All photographs in this article are Copyright 2021 Construction Equipment Guide. All Rights Reserved.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 73

Page 74 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT....................................................................2 ACTIVE HEAVY DUTY COOLING....................................................6 AFE .................................................................................................25 ALEX LYON & SON INC .................................................................71 ASTEC/CARLSON PAVING PRODUCTS ......................................37 ASTEC/ROADTEC ..........................................................................29 ASV ...........................................................................................48,49 AUCTION BLOCK ...........................................................................70 BARGAINS ......................................................................................70 BELL TRUCKS AMERICA INC .......................................................51 BOMAG AMERICAS INC ................................................................36 CALVIN GROUP INC ......................................................................18 CEG SCALE MODELS....................................................................42 CONDUIT SEARCH GROUP..........................................................22 CONSTRUCTION EQUIPMENT GUIDE...............14,24,46,59,68,73 DIAMOND A EQUIPMENT..............................................................23 DOMINION EQUIPMENT PARTS..............................................13,60 DYNAPAC...................................................................................38,39 ECCO EQUIPMENT........................................................................21 FLANGE LOCK................................................................................10 HENDRIX MACHINERY LLC............................................................3 HITACHI CONSTRUCTION MACHINERY ...............................66,67 HYUNDAI CONSTRUCTION EQUIPMENT ..............................44,45 IEDA.................................................................................................17 IRON BOUND AUCTIONS..............................................................70 JCB INC ...........................................................................................65 JFW EQUIPMENT INC ...................................................................30 JJ SCHECKEL CORP .......................................................................5 JOHN DEERE..................................................................................55 JOHN DEERE SKID STEER ..........................................................47 KIRBY-SMITH MACHINERY INC....................................................76 KOMATSU AMERICA CORP ..........................................................57 LEEBOY...........................................................................................31 LIUGONG CONSTRUCTION MACHINERY .................................64 MAULDIN PAVING PRODUCTS.....................................................28 NATIONAL ATTACHMENTS ...........................................................14 NIECE EQUIPMENT .......................................................................19 NPK CONSTRUCTION EQUIPMENT INC.....................................15 RITCHIE BROS. AUCTIONEERS...................................................75

ROAD BUILDERS MACHINERY ......................................................7 SAKAI AMERICA INC......................................................................41 SANY AMERICA INC.......................................................................11 TAKEUCHI ..................................................................................62,63 THUNDER CREEK............................................................................6 TORO...............................................................................................50 TROPHY TRACTOR .......................................................................20 VANTAGE AUCTIONS ....................................................................70 VOLVO COMPACTION ...................................................................40 VOLVO CONSTRUCTION EQUIPMENT-NA .................................61 WACKER NEUSON ........................................................................43 WAINROY........................................................................................25 WEILER PRODUCTS .....................................................................35 WIRTGEN AMERICA ......................................................................33 YANMAR AMERICA CORP...............................................................9 CALIFORNIA SUPPLEMENT BAR NONE AUCTION.......................................................................1 CALIFORNIA CAT GROUP...............................................................3 CONSTRUCTION EQUIPMENT GUIDE ........................................13 GARTON TRACTOR INC................................................................11 JCB CALIFORNIA ...........................................................................16 MEGA MACHINERY CO .................................................................15 PIRTEK CALIFORNIA .......................................................................7 SCOTT EQUIPMENT - FONTANA ...................................................2 SMITHCO ..........................................................................................5 SOUTHERN CALIFORNIA CONTRACTORS.................................11 VOLVO CONST EQUIP & SVCS...................................................8,9 WESTERN RENTALS .....................................................................15 PACIFIC NORTHWEST SUPPLEMENT CONSTRUCTION EQUIPMENT GUIDE ..........................................9 FEENAUGHTY ..................................................................................7 JET CITY EQUIPMENT.....................................................................5 MODERN MACHINERY....................................................................2 ORION EQUIPMENT ......................................................................12 PACWEST MACHINERY ..................................................................3 PAPE MACHINERY .........................................................................11 TRIAD MACHINERY .......................................................................10

The Advertisers Index is printed as a free editorial service to our advertisers and readership.

Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2021 • Page 75

Unreserved public equipment auctions

Flexible financing approvals

2014 Volvo A25G | Houston

Caterpillar D6N | Houston

2020 Peterbilt 567 | Houston

2015 John Deere 772G AWD | Houston

2012 Volvo L70G | Tipton

1 of 2 – 2019 Grove GMK5150L 175 Ton | Decatur

2021 Grove GRT8100 | Decatur

2015 Caterpillar 326FL | Orlando

2018 Powerscreen Trakpactor 260S | Orlando

38,850+ items in +85 auctions including Edmonton, AB Decatur, AL Houston, TX Orlando, FL Tipton, CA Las Vegas, NV Southeast Regional Event

Oct 26–28 Nov 3 Nov 9–11 Nov 17–18 Nov 19 Nov 23 Dec 3

Fort Worth, TX Phoenix, AZ Sacramento, CA Great Plains Regional Event Los Angeles, CA Northeast Regional Event Chehalis, WA

IMPORTANT MESSAGE: Due to COVID-19, all of our auctions are now online bidding only.

For the most up-to-date information visit rbauction.com/covid-19

Dec 7–8 Dec 8 Dec 8 Dec 9 Dec 10 Dec 14–15 Dec 15

Financing & leasing available

Online bidding information

Up to 100% financing, with no money down.

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

More items added daily Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com

Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728, Auctioneer Chad M. Johnson # 17668, Auctioneer Kevin L Perry # 1763, Auctioneer James L Valentine # 1764, Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701, Auction Company Bond #0470724, Auctioneer Patrick J. Hicks Bond # 0470727, Auctioneer Chad M. Johnson # 17668, Auction Business License #AB303, Auctioneer Trevor J. Moravec # AU3889, Auction Company License # 001348, Auctioneer Frederick R. Vilsmeier # AUNR003087, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Used Motor Vehicle Dealer License #2647, , Auction Company License #AY00208L, Motor Vehicle Dealer License #DLR25867, Auctioneer Chad M. Johnson # 17668, Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728,

Page 76 • October 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2017 Komatsu PC490LC-11 2015 Wirtgen WR200 XLI

2014 Caterpillar D6T XW CT14025X 2,540 hrs.

KM17155M $269,500 3,189 hrs.

WR15021 $357,500 1,800 hrs.

2006 Komatsu WA200-5L

2017 Komatsu D85EX-18

2014 Komatsu D39PX-23

2012 Komatsu PC360LC10

KM06305U $61,500 8,343 hrs.

KM16523M $399,500 2,059 hrs.

KM14199X

$117,500 2,972 hrs.

KM12252D $118,500 6,700 hrs.

2015 Caterpillar D9T

$219,750

2015 Komatsu PC138USLC-10 KM15152X 4,200 hrs.

$109,500

2006 Komatsu WA200-5L

2016 Komatsu WA470-8

2016 Komatsu PC240LC-11

2017 Deere 644K

CT15767X $569,500 8,364 hrs.

KM06305U $61,500 8,343 hrs.

KM16433X $143,500 7,504 hrs.

KM16519X $157,500 3,383hrs.

$109,250 7,109 hrs.

2008 Caterpillar 963D

2018 Komatsu D65EX-18

2017 John Deere 310LEP

2014 LeeBoy 8510C

CT08803X $139,500 7,139 hrs.

KM18352X $209,500 3,500 hrs.

JD17004J $79,500 1,550 hrs.

LB14006X $79,500 2,219 hrs.

JD17003X

2015 Komatsu HM400-5 KM15268M 10,500 hrs.

$459,500

All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • McAlester • Odessa • Waco • Oklahoma City • St. Louis • Tulsa

Contact Terry Lyness for details and pricing.

877.549.7501

www.kirby-smith.com