Issuu

$3.00

Published Nationally ®

Western Edition

August 2 2020 Vol. IX • No. 16

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Webber Puts Its Signature on Irving Bridge Webber Construction photo

Webber Construction currently is working to deliver the Signature Bridge Project, a 500-ft. long north-south structure that spans State Highway 114 in the city of Irving, and is a nearly $40 million job.

Largest Project in Boulder Can Go On After Ruling...8

Ransome Shark Splitter Saves Hawaii Bridge...16

By Irwin Rapoport CEG CORRESPONDENT

Pavers Beat Extremes To Get Job Done...23

Table of Contents ............4

Webber LLC will deliver the Texas Department of Transportation’s (TxDOT) $39.5 million Signature Bridge project, a 500-ft. long north-south structure that spans

State Highway 114 in the city of Irving that will connect the old Texas Stadium, the former home of the Dallas Cowboys (south side) with a large development area – 78 acres – on the north side. Crews began their work on March 2, 2018, and are expected to

finish the job by the end of 2020. The cable-stayed bridge project is funded by federal (20 percent) and state (80 percent) funds, with Irving contributing $10 million for the aesthetics. It will have two through lanes and a left turn lane on each side, along with bicycle

lanes and pedestrian walkways on both sides. The contract also includes frontage road improvements. Substantial completion was achieved over the last few months. The bridge — designed by Bridgefarmer & Associates Inc. — see BRIDGE page 40

Industry Lauds Easing Hours of Service Regs

Paving Section ..........23-34 By Lucy Perry

Backhoes & Attachments Section ......................45-56 Auction Section ........58-61 Business Calendar ........61 Advertisers Index ..........62

CEG CORRESPONDENT

Touting its revised Hours of Service (HOS) regulations as providing drivers more flexibility, the Federal Motor Carrier Safety Administration (FMCSA) released a final rule in May. It’s designed to ease HOS rule compliance and takes effect Sept. 29, 2020. While safety advocates have concerns, trucking industry groups applaud the new rules. The rules will provide America’s truckers “greater flexibility to keep America moving,”

said U.S. Transportation Secretary Elaine L. Chao. “The Department of Transportation and the Trump Administration listened directly to the concerns of truckers seeking rules that are safer and have more flexibility — and we have acted.” Based on the thousands of comments the department received, the reforms are designed “to improve safety on America’s roadways and strengthen the nation’s motor carrier industry,” said FMCSA Acting Administrator Jim Mullen. The HOS rules, first adopted in 1937, specify the permitted operating hours of commercial drivers. In 2018, FMCSA asked for public com-

ment on portions of the rules, and last August the agency published a detailed proposed rule that received almost 3,000 public comments. Mixed Reaction Petitions for Reconsideration of the final rule had to be submitted to the FMCSA Administrator no later than July 1. A coalition of safety advocacy groups, with support from the International Brotherhood of Teamsters, addressed concerns about the new rule with the FMCSA. see RULES page 22

Page 2 â€˘ August 2, 2020 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

SERIOUS POWER â€” IN A â€”

SMALLER PACKAGE Par ts are only a click away. Order par ts is simple!

Keep track of your account status!

INTRODUCING THE RT-50:

SI YH[LK VWLYH[PUN JHWHJP[` ŕ Ž [V^HISL ^P[O Ăą [VU WPJR \W JSHZZ SLHKPUN NYV\UK WYLZZ\YL ŕ Ž WH[LU[LK 7VZP ;YHJRÂŽ undercarriage

Request service, manage nage rentals,and quickly look up equipment inffo for par ts searches. lloo

ASV TRACK LOADERS AND SKID STEERS. Industry-leading products that change the way work gets done.

Any One - Tiime P Parts Purchase up to $1,000 o on the 4Rivers Customer Por o ta t l with Code o â€˜Por o ttal10â€™ in â€˜Orrder Notesâ€™.

Unlock your phone,, and hover over thiss code with your cam mera to get started!

Bee Equipment Sales Ltd.

FMI Equipment

www.beeequipmentsales.com

www.fmiequipment.com

2506 Slaton Highway Lubbock, TX 79404 806-745-1511

11111 E Trent Avenue Spokane, WA 99206 509-927-4071

2QH FRXSRQ SHU FXVWRPHU RÎ? YDOLG RQ 5LYHUV &XVWRPHU 3RUWDO 3DUWV RUGHUV XS WR IRU PD[LPXP GLVFRXQW RI RÎ? RUGHU 2Î? 2 HU 9DOLG 0D\ WKURXJK 'HFHPEHU 6RPH UHVWULFWLRQV DSSO\ 6HH GHDOHU IRU GHWDLOV

ÂŠ 2020 ASV Holdings, Inc. For more information, visit ASVI.COM.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 3

"In Business for over 33 Years" 2014 Dynapac CA2500D, Stk#: 12242, EROPS, A/C & Heat, 84" Smooth Drum, 1,403 hrs., Front & Rear Clear Out Bar, 23.1x26RS Tires @ 80%, Cumming Eng. ......................................$59,500

www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

2018 Terex TLB840R, Stk#: 11556, OROPS,

Se Habla 4WD, New, 606 hrs., 24" Bucket, Ext-Hoe, Pilot Español Controls, 12x16.5 Front Tires, 500x70x24 Rear

Tires, 4 Cyl. Deutz Eng...........................$42,500

2013 Cat D6T LGP, Stk#: 12081, EROPS, A/C & Heat, Sweeps, Rear Screen, Available with St/Tilt Blade or Hyd. Angle Blade, 5,641 hrs., 36" Pads, with Allied Winch or Ripper ................$119,500

2016 Volvo SD115, Stk#: 12095, 84" Smooth Drum, 771 hrs., 23.1x26R3 Tires, 4 Cyl. Volvo Eng ........................................................$59,500

1990 Grove RT745, Stk#: 12055, 45 Ton, 4WD, 2012 JCB VM75D, Stk#: 12285, OROPS, 54" Main Boom of 104' for a maximum tip height of 2012 SullAir 375H, Stk#: 12334, 3,716 hrs., 165' (50.3) 12 hrs., 26.5x25 Tires, 8 Cyl. Eng....... 375CFM, 325/75Rx15 Tires, 2" Ball Hitch, 4 Cyl. Smooth Drum w/Pad Shell Kit, 1,788 hrs., ................................................................$49,500 JD Eng ..................................................$10,500 14.9x24 Tires ........................................$34,500

2012 SullAir 185CFM, Stk#: 12339, 2,772 hrs., 185CFM, 175/80Rx13 Tires, 2" Ball Hitch, 4 Cyl. JD Eng ....................................................$9,500

2015 Cat D6T LGP, Stk#: 12024, EROPS, A/C & Heat, Available with St/Tilt Blade or Hyd. Angle Blade, 5,525 hrs., 36" Pads, with Paccar Winch or Ripper ....................................................$129,500

2016 SunWard SWE210F, Stk#: 12277, EROPS, 2011 Airman PDS185S, Stk#: 12360, 6,769 A/C & Heat, FM Stereo, 20 hrs., 48" Bucket, Aux. hrs., 185CFM, 125 PSI, 49 hp., ST205/75Rx15 Hyd., 24" Pads, Izuzu Eng., 9' 2" Wide ..$89,500 Tires, 2" Hitch, 4Cyl. Yanmar Eng ............$7,500

2010 Daewoo G25E-3, Stk#: 12047, 6,000 lbs., 15 ft., 4,388 hrs., 40" Forks, 48" Frame, 3 Stage Mast, 7.00x15 Front Tires, 6.50x10 Rear Tires, Propane, wt 9,568 lbs. ............................$9,500

2018 John Deere 450K LGP, Stk#: 12290, EROPS, A/C & Heat, Sweeps, Rear Screen, AM/FM Radio, 6 Way Blade, 569 hrs., 9' 6" Wide ..............................................................$86,500

2019 Cat D5K2 XL, Stk#: 12297, EROPS, A/C & Heat AM/FM Radio, 6 Way Blade, 448 hrs., 24" Pads, System One U/C, Grade Control, Long Track Frame, Cat. Eng., 8 ft. Wide ........126,500

2011 Cat TL12-55, Stk#: 11996, EROPS, A/C & Heat, 12,000 lbs., 55 ft., 6,747 hrs., 60" Forks, 74" Frame, Aux. Hyd., 400x75x28 Tires, 4 Cyl. Cat Eng. ................................................$52,500

2013 JLG /Skytrak 10054, Stk#: 11916, 10,000 2018 Volvo EC250E LR, Stk#: 12298, EROPS, lbs., 54 ft., 7,247 hrs., 60" Forks, 74" Frame, A/C & Heat, AM/FM Radio, 1,851 hrs., 95% 2007 JLG 600A, Stk#: 12144, OROPS, 2,346 hrs., 400x75x28 Foam Filled Tires, 4 Cyl. Cummins Eng 355x55Dx625 Foam Filled Tires, 4 Cyl. Deutz Eng.. U/C, 60" Bucket, 25 1/2 Stick, Back-Up & Side Camera ................................................$139,500 ................................................................$46,500 ................................................................$22,500

2013 JLG G12-55A, Stk#: 11883, EROPS, 12,000 lbs., 55 ft., 6,362 hrs., 48" Forks, 52" Frame, 4WD, 400/75- 28 Tires, 4 Cyl. Cummins Eng.........................................................$56,500

2012 Skytrak 10054, Stk#: 11990, 10,000 lbs., 54 ft., 7,019 hrs., 60" Forks, 74" Frame, Aux. Hyd., 400x75x28 Foam Filled Tires, Hyd. Self Leveling System, 4 Cyl. Cummins Eng. $46,500

2015 Toyota 8FGU25, Stk#: 12282, 15 ft., 1,993 Hrs., 40" Forks, 3 Stage Mast, Side Shift, 7.00x 12 Front Tires, 6.00x9 Rear Solid Tires, Duel Fuel Propane/Gas ..........................$19,500

2017 Cat 299D2, Stk#: 12331, OROPS, 1,521 hrs., Aux., Hyd., 18" Rubber Tracks, Manual Quick Connect, 48" Carriage, 48" Forks, Standard Flo Only ..................................$39,500

2018 Cat 323FL, Stk#: 12314, EROPS, A/C & Heat, AM/FM Radio, 1,730 hrs., 42" Bucket, 36" Pads, Aux. Hyd ......................................$146,500

2013 Atlas Copco QAS90, Stk#: 12088, 6,135 hrs., ST205x75Rx15 Tires, JD Eng. ........$19,500

2016 Volvo EC220EL, Stk#: 12320, EROPS, A/C & Heat, AM/FM Radio, 3,629 hrs., 100% U/C, Quick Coupler, 42" Bucket, 35" Pads, Aux. Hyd., Rear Camera ............................................$79,500

2014 Hyundai 160D-7E, Stk#: 12174, EROPS, A/C & Heat, 35,274 lbs. Lift, 13 ft., 7,384 hrs., Rear Camera, Side Shift Carriage, 12.00x20 NHS 2012 Genie S40, Stk#: 12108, 500 lbs., 40 ft., 2,759 hrs., 12x15.5 Foam Filled Tires, 3 Cyl. Tires @ 80%, Cummins QSB 6.7 Eng., wt. 43,265 lbs..............................................$79,500 Deutz Eng...............................................$22,500

2012 Cat 320DL, Stk#: 12358, EROPS, A/C & Heat, AM/FM Radio, old meter 4,030 hrs., New Meter .08 hrs., 42" Bucket, 31" Pads ....$76,500

2016 Haulotte HT132RTJ Pro, Stk#: 11372, 500 lbs., 132 ft., 81 hrs., 4WD, 8ft. Man Basket, JIB, 2010 JLG 600AJ, Stk#: 12136, 500 lbs., 60 ft., Straight Boom, 445x65Dx22.5 Foam Filled Tires, 2006 Case 325, Stk#: 12007, EROPS, A/C & Heat, 2,912 hrs., 355x55Dx625 Tires, 4 Cyl. Deutz 4 Cyl. Perkins Diesel Eng ........................$59,500 5,489 hrs., 650x65Rx25 Tires..................$66,500 Eng.........................................................$29,500

2010 John Deere 6330, Stk#: 11394, OROPS, Sweeps, Front & Side Screens, 6,440 hrs., 4WD, 793x535x511 Front Tires, 345 LS-2 Rear Tires, 4 Cyl. JD Eng. ..........................................$29,500

2012 Cat D6T LGP, Stk#: 12083, EROPS, A/C & Heat, Rear Screen, Available with 13 ft. New St/Tilt 2016 John Deere 700K XLT, Stk#: 12354, Blade or Hyd. Angle Blade, 6,190 hrs., Allied EROPS, A/C & Heat, AM/FM Radio, 6 Way Blade. Winch or Ripper, 36" Pads ....................$109,500 2,879 hrs., 22" Pads, 80% U/C, 9'5" Wide$98,500

2012 JLG 400S, Stk#: 12161, 500 lbs., 40 ft., 3,296 hrs., Foam Filled Tires @ 75% ......$26,500

2015 Doosan G25E5, Stk#: 12280, 15ft., 1,559 Hrs., 40" Forks, 3 Stage Mast, 7.00x15x5.50 Front Tires, 6.50x10 Rear Tires, Duel Fuel Propane/Gas ..........................................$19,500

2012 Laymor SM300, Stk#: 12093, 813 hrs., 8 ft. Broom, 3 Wheel, ST205x75Rx14 Tires, 4 Cyl. Kubota Eng...............................................$14,500

Page 4 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LARGEST CONSTRUCTION PROJECT IN BOULDER CAN PROCEED

A water utility company in Colorado can proceed with its planned reservoir expansion and the largest construction project in Boulder County after it received final federal approval.

Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

IN THIS ISSUE

WESTERN EDITION

KIRBY-SMITH MACHINERY APPOINTS INTERNATIONAL SALES REPRESENTATIVE

ISUZU OPENS WYO. DEALERSHIP, NOW OPERATES IN ALL 50 STATES

RITCHIE BROS.’ MARKET TRENDS PROVIDES TRUCK TRACTOR INSIGHTS

Kirby-Smith Machinery Inc. (KSM) has hired Rick Derr as international sales representative and equipment appraiser. Derr joins KSM’s used equipment department and will focus on increasing sales of used equipment internationally.

Isuzu Commercial Truck of America, Inc. welcomed its newest dealership, located in Casper, Wyo. As a result of the addition of Isuzu Truck of Wyoming, the company now has dealerships in all 50 states.

Ritchie Bros. shares insight into industry trends via its Market Trends module within its Ritchie Bros. Asset Solutions suite of tools, allowing customers, investors and analysts to better understand the strength of an asset class.

JCB has been awarded a contract to supply the U.S. military with a fleet of specialized high speed excavators over the next eight years in a deal worth up to $269 million.

Nothing good can come of a severe thunderstorm unless you happen to be on the receiving end of an emergency contract to clean up the aftermath. Cushnie Construction Company Inc. encountered this situation on March 16, 2020.

As the industry works to come back from the effect of the pandemic and related shutdowns, CIS looked at the numbers of private and public projects out to bid across its coverage areas to gauge the impact.

The TA15 autonomous electric hauler from Volvo Autonomous Solutions has wowed a panel of design experts in Essen, Germany, to win a Red Dot Product Design Award 2020.

Easton Sales and Rentals, an earth-moving and heavy equipment rental firm in Albuquerque, N.M., recently was appointed as the LiuGong and Dressta equipment dealer for its market area.

Often construction teams face the end of the paving season knowing that challenging weather lies ahead. This scenario was especially true for projects in two contrasting environments, the “North Pole” and the California desert.

58 61

COMING AUCTIONS BUSINESS CALENDAR

bidadoo had a record second quarter in sales, volume and online traﬃc highlighted by a website traffic surge of 155 percent and a new visitor web traﬃc spike of 188 percent.

Deere & Company (DE) announced a new vision and operating model in order to accelerate its success in the integration of smart technology innovation with Deere’s legacy of manufacturing excellence.

ALLEN HDX600 Hydra-Drive Riding Trowel

JCB SECURES NEW MILITARY EQUIPMENT FLEET CONTRACT

CIS BREAKS DOWN PANDEMIC IMPACT: A LOOK AT THE NUMBERS

LIUGONG NORTH AMERICA ADDS EASTON AS DEALER IN N.M.

BIDADOO POSTS RECORD NUMBERS IN SALES, VOLUME, ONLINE

Founder, Publisher & CEO Western Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Dennis Hogeboom Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com Advertising e-mail production@cegltd.com

Mobile

Facebook

Twitter

RANSOME SHARK TOOTH SPLITTER SAVES HAWAII BRIDGE

VOLVO’S TA15 AUTONOMOUS HAULER WINS RED DOT AWARD

PAVING IN THE EXTREMES: BEATING WEATHER TO GET PROJECTS DONE

JOHN DEERE ANNOUNCES NEW VISION, OPERATING MODEL

BACKHOE SECTION

CONSTRUCTION EQUIPMENT GUIDE’S BACKHOE CHARTS

CAT 440, 450 BACKHOE LOADERS DELIVER PERFORMANCE, COMFORT

CONSTRUCTION EQUIPMENT GUIDE LOOKS BACK: 1950S-ERA BACKHOES

DEPARTMENTS EQUIPMENT

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

YouTube

Dennis Hogeboom

Kent Hogeboom

Patrick Kiel

Debbie Hansen

• Colorado• Louisiana • Oklahoma • Texas • New Mexico

National Sales Manager

• Idaho • Montana • Oregon • Washington • Wyoming

• Arizona • California • Nevada • Utah

Cell e-mail

952/353-1770 612/481-8557 Cell e-mail pkiel@cegltd.com

Cell e-mail

602/679-8759 dennishogeboom@cegltd.com

315/866-1423 518/221-5159 khogeboom@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2020, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

702/239-0348 dhansen@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 5

SALES

RENTALS

AND

We Sell and Rent Opportunity

Sunward Excavators available for rent or sale

Sunward Skid Steer Loaders available for rent or sale

RENTAL RATES $300 a Day $1,200 a Week $3,250 a Month

RENTAL RATES $250 a Day $800 a Week $2,250 a Month

In response to these challenging times

we will be offering 15% off all rentals rates through the end of the year.

Help Wanted (Lake Elsinore, CA): Fully Trained Diesel Mechanic, 10 years experience

hablamos español • Call Mike (909) 821-5448

Laser Screed and Curb Machine Rentals Help Wanted (Las Vegas, NV): Laser Screed Operator w/5 yrs experience, prior 3D experience required

Madrid Laser Screed

Gomaco GT-3600

Madrid Laser Screed Inc. Servicing California and Nevada Madrid Laser Screed

800-793-5603 • 202 W. Minthorn St. • Lake Elsinore, CA 702-778-5667 • 3439 Shamrock Avenue • Las Vegas, NV

Curb Machine trimming the grade before concrete is poured producing a much better product

Page 6 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SOLD NEAR Y YOU OU.

You o r local Doo D san® dealer is you ur source ffor or sales, par a ts and service.

Learn more at doosanequipment.c . om

Doosan® and the Doosan a logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2020 Doosan Infracorre North America, LLC. All rights reserved.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 7

Authorized Doosan Dealers

ALASKA

CALIFORNIA

TEXAS

CRAIG TAYLOR EQUIPMENT

BERCHTOLD EQUIPMENT COMPANY

H & V EQUIPMENT SERVICES

907-276-5050 doosandealers.com/Anchorage

661-323-7817 doosandealers.com/Bakersfield

361-241-1000 doosandealers.com/Corpus-Christi

907-452-1192 doosandealers.com/Fairbanks

805-922-7905 doosandealers.com/Santa-Maria

956-565-3788 doosandealers.com/Progreso

907-262-5977 doosandealers.com/Soldotna

MEGA MACHINERY CO.

210-648-5885 doosandealers.com/San-Antonio

907-376-3838 doosandealers.com/Wasilla

619-561-7832 doosandealers.com/Lakeside

R.B. EVERETT & CO. RGW EQUIPMENT

IDAHO BARRY RENTAL

925-606-2450 doosandealers.com/Anderson-CA

208-734-4147 doosandealers.com/Twin-Falls

925-606-2451 doosandealers.com/Lathrop

CASCADE TRADER

925-606-2450 doosandealers.com/Livermore

208-762-5575 doosandealers.com/Hayden

HIGH DESERT BOBCAT & DOOSAN 208-643-4147 doosandealers.com/Nampa

SCOTT EQUIPMENT 909-822-2200 doosandealers.com/Fontana 562-777-0775 doosandealers.com/Santa-Fe-Springs

MONTANA BOBCAT OF BIG SKY 406-252-0822 doosandealers.com/Billings

NORTHWEST PARTS AND RIGGING CO.

COLORADO EQUIPMENTSHARE 303-728-4450 doosandealers.com/Denver

OREGON

406-892-1778 doosandealers.com/Columbia-Falls

FEENAUGHTY MACHINERY COMPANY

OKLAHOMA

541-636-3660 doosandealers.com/Eugene

CENTRAL POWER SYSTEMS & SERVICES 580-256-6014 doosandealers.com/Woodward 405-324-2330 doosandealers.com/Yukon

503-282-2566 doosandealers.com/Portland

817-299-0010 doosandealers.com/Haltom-City 281-991-8161 doosandealers.com/Pasadena

TEXAS TIMBERJACK 936-634-3365 doosandealers.com/Lufkin

VENTURE DRILLING SUPPLY 512-869-2974 doosandealers.com/Pflugerville

UTAH EQUIPMENTSHARE 385-308-5516 doosandealers.com/Salt-Lake-City

WASHINGTON CASCADE TRADER 360-748-1182 doosandealers.com/Chehalis

WYOMING BOBCAT OF CASPER 307-235-6685 doosandealers.com/Casper

WILSON EQUIPMENT

BOBCAT OF GILLETTE

541-830-3966 doosandealers.com/Central-Point

307-686-4890 doosandealers.com/Gillette

CONTACT YOUR LOCAL DOOSAN ® DEALER TODAY.

Page 8 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Largest Construction Project in Boulder Can Proceed BOULDER, Colo. (AP) A water utility company in Colorado can proceed with its planned reservoir expansion and the largest construction project in Boulder County after it received final federal approval, company officials said. Denver Water CEO Jim Lochhead announced that the Federal Energy Regulatory Commission approved the Gross Reservoir expansion project on July 17, the Daily Camera reported. “Expanding Gross Reservoir is a critical project to ensure a secure water supply for nearly a quarter of the state's population. The project provides the system balance, additional storage and resiliency needed for our existing customers as well as a growing population,” Lochhead said. “We are seeing extreme climate variability and that means we need more options to safeguard a reliable water supply for 1.5 million people in Denver Water's service area.” Even with federal approval, Boulder County still wants to conduct its own review under local government 1041 power, that could result in the project's ultimate offi-

Denver Water CEO Jim Lochhead announced that the Federal Energy Regulatory Commission approved the Gross Reservoir expansion project on July 17.

cial disapproval by local leaders. “We think that it was a well-reasoned decision from the district court and we have strong argu-

ments in defense of the appeal,” County Deputy Attorney David Hughes said. “It's not uncommon for local governments to use 1041

powers in review of major projects by other governments.” Denver Water is expecting to appeal the county's decision and

provide an opening brief in August. Environmental Group President Beverly Kurtz has argued that there are severe deficiencies in the license approval and said the coalition of environmentalists will fight against the approval. “Our coalition intends to fight this project to the end. We continue to engage in legal challenges at the County and Federal level, and we rely on the Boulder County Commissioners to continue to enforce the requirement for compliance with Colorado Statute 1041,” she said. The design phase for the expansion is expected to finish by the middle of next year, followed by four years of construction, if approved, officials said. Construction is expected to include raising the existing Gross Dam by about 130 ft. (40 m) and increasing the reservoir capacity and storage. “We are committed to working closely with the Boulder County community to ensure safety, be considerate neighbors and retain open, two-way communication channels during this construction project,” Project Program Manager Jeff Martin said. 

Kirby-Smith Machinery Appoints International Sales Representative

Rick Derr

Kirby-Smith Machinery Inc. (KSM) has hired Rick Derr as international sales representative and equipment appraiser. Derr joins Kirby-Smith Machinery’s used equipment department and will focus on increasing the sale of used equipment internationally. In addition to sales, he also will be responsible for evaluation and appraisal of trade-ins. Derr, who will work out of the company’s new Lubbock, Texas, facility, will provide a more direct presence for the used equipment department’s responsibilities in west Texas. He brings more than 20 years of equipment sales experience to his new role, including seven years as a used equipment manager operating in Texas and Oklahoma. David Mehrtens, director of remarketing and used equipment of KSM, believes Derr is an excellent find. “With the growth of our west Texas operations, there was a need to have someone local as a resource for our sales team,” Mehrtens said. “Opportunities to bring someone on board with the combination of Rick’s hands-on experience in both selling and valuing trades, knowledge of the used equipment industry, and familiarity with the markets we serve are rare. Rick is going to be a great addition not only to our department, but to the entire Kirby-Smith family.” Derr is equally excited to be a part of Kirby-

Smith Machinery, acknowledging the heavy equipment distributor’s culture was a big factor in his decision. “The environment just always seemed different at KirbySmith, and my experience since joining has proved that out,” said Derr. “In an industry that is all about relationships, they take great care in how they treat both customers and each other. It means a lot to me as a salesman, having that level of support as an expectation. I’m excited to be a part of what we are building.” About Kirby-Smith Machinery Inc. Kirby-Smith Machinery Inc. was established in 1983 and is a new and used heavy construction equipment and crane dealer. Kirby-Smith Machinery and its hundreds of dedicated professional employees are committed to providing reliable new and used equipment for sale and equipment rentals, as well as responsive service and equipment parts for multiple makes and models. Kirby-Smith Machinery has 12 branch locations in Oklahoma, north Texas, west Texas, Kansas and Missouri and a dedicated pipeline services division. For more information, call 888/861-0219 or visit kirbysmith.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 9

Check the ads s for quality on the following page ed equipment from trust dealers.

WHO IS THE IEDA? The Independent Equipment Dealers Association (IEDA) is a self-regulating body of independent dealers who pride themselves on being reputable, highly qualified professionals in the used equipment market worldwide. Standard Members buy and sell equipment on a wholesale and retail level via the IEDA.

Page 10 â€¢ August 2, 2020 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

7TFI <NIJSJWX

2FYJWNFQ 9WFSXKJW ;JMNHQJX

10â€™ Commercial Pavers Ñ£ (TRRJWNHFQ 5F[JWX

<NYM T[JW ^JFWX TK J]UJWNJSHJ \J XUJHNFQN_J NS GZ^NSL FSI XJQQNSL ZXJI FXUMFQY UF[NSL JVZNURJSY

8â€™ Commercial Pavers Ñ£ (TRRJWNHFQ 5F[JWX

9FSIJR ;NGWFYTW^ 7TQQJWX

WEPIW$GEPZMRKVSYTMRG GSQ \\\ HFQ[NSLWTZUNSH HTR

&XUMFQY )NXYWNGZYTWX

(MNU 8UWJFIJWX

2NQQNSL 2FHMNSJX

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 11

RENTALS

HEAVY EQUIPMENT Serving the Construction & Mining Industries Since 1962

JCB North America President and CEO Richard Fox-Marrs (R) and JCB Vice President of Government and Defense Chris Giorgianni (L), along with the JCB Government and Defense team, look on as Viengkeo Johnson, contracts manager of JCB, signs the new contract to produce a fleet of specialized high-speed excavators over the next eight years for the U.S. military in a deal worth up to $269 million.

JCB Secures New Military Equipment Fleet Contract JCB has been awarded a contract to supply the U.S. military with a fleet of specialized high speed excavators over the next eight years in a deal worth up to $269 million. The deal centers on the supply of High Mobility Engineer Excavators (HMEEs) for the U.S. Army and U.S. Marine Corps. Prototypes of the machine — capable of speeds up to 55 mph (88 kmh) — were first developed in 2002 specifically for the U.S. Army to meet its demand for a high-speed backhoe loader capable of undertaking military engineering tasks. In 2005, JCB won the first multi-year production contract valued at approximately $209 million, with an additional service contract worth approximately $20 million. Subsequent contract extensions and international sales have boosted production to 1,200 machines for the U.S. and allied nations. It was confirmed on July 6 that a new contract has been signed for the supply of up to 400 HMEEs, which will all be manufactured at JCB’s North American headquarters in Savannah, Ga. In addition to the base unarmoured variant, JCB will be providing armoured variants as well as attachments and service support. Chris GiorgianniGraeme Macdonald, JCB CEO said, “When it was developed, the HMEE revolutionized the way military tasks were carried out and we are delighted that the U.S. military has shown great faith in the project by placing this new order.” “To win this eight year contract is fantastic news for JCB’s North America Headquarters, which has been manufacturing HMEEs here for the past 13 years,” said Richard Fox-Marrs, JCB North America

president and CEO “The U.S. military has shown tremendous confidence in this JCB product which speaks volumes for the team behind its design, engineering, manufacturing and after sales support.” The HMEE combines the capabilities of the JCB backhoe loader and the high-speed JCB Fastrac — one of the world’s fastest tractors, which has full suspension and antilock brakes. The objective of the HMEE concept is to have a machine capable of travelling at military convoy speed without the need for transportation by a truck and low-loader trailer. “The JCB Government and Defense team is proud to continue to support the U.S. military through the extension of the HMEE program, said Chris Giorgianni, vice president of Government and Defense at JCB North America. “The fact that the U.S. military has entrusted JCB to manufacture the HMEE for over a decade is a testament to the work the entire team here has accomplished. We look forward to furthering the HMEE program and working with the U.S. military on future projects.” The 17.5 ton, 6.7 L engine machines are well suited to a range of military and disaster relief missions, including earthmoving, fortification construction and ground clearing. In addition to its top speed of 55 mph, the HMEE is certified for military transport on ships, rail and aircraft, and for airdrop operations. It is available in various configurations including an armoured specification. It is four-wheel drive, four-wheel steer, can lift more than 2 tons and dig to a depth of almost 13 ft. For more information, visit www.jcb.com. 

Former Rental Units for Sale:

2001 CAT 320CL, Ready to work, 24T HEX 1996 CAT 815F, Excellent, work ready 22 ton with reach boom, med stick, cab, AC, aux soil compactor with OROPS, S-Dozer w/ tilt, hyd. QC, 1000 hrs on new tracks ......$55,000 5200 hrs on rebuilt engine, 0hrs on newly rebuilt trans and 1200hrs on feet ....$149,000

2003 CAT D6R DS LGP, Excellent, series 2, LGP w/ cab, AC, 6S Dozer w/ tilt, drawbar, Almost new tracks w/ 50% 36" flat pads. Fully serviced and work ready ....................$79,000

1997 CAT D6R LGP, CAB, AC, 6S Dozer, 2003 CAT 330C, Work ready 40T HEX with DRAWBAR, 1200 hr on new UC w/ 36" FLAT reach boom, med stick, QC, GP Bucket, fully PADS, 2700 hr on engine rebuild. Runs great, serviced, Tier 2 engine ......................$69,000 former rental unit ..............................$65,000

2003 CAT 14H, Work ready, larger blade, fully equipped with cab, AC, pushblock, ripper, engine doors, 20.5-25 tires in good condition. 1 of 2 available ................................$149,000

1980 CAT 631D, 2000 hrs on CAT dealer re2012 TEREX TA300, Excellent, low hours, power 3408TA, T-2 engine, cab, AC, retarder, 30T 6x6 Artic with retarder, tailgate, backup 37.25x35 tires at 90%F, good rears. Excellent camera, supplemental steering, good tires. Work ready. One of two available ....$139,500 ..........................................................$99,000

2011 DEERE 544K, LOW Hours, cab, AC, QC with GP Bucket and Forks, in excellent condition, work ready ................................$82,500

(714) 340-1025 • Mike Kustura: sales@EccoEquipment.com

www.eccoheavyequipment.com

Santa Ana, CA – HQ (714) 554-4851

Visalia, CA (559) 651-0116

San Diego, CA (619) 205-2026

Coachella, CA (760) 578-1043

Sacramento, CA (916) 997-7492

Bullhead City, AZ (928) 715-0672

Riverside, CA (951) 276-9025

Stockton, CA (510) 516-5567

Phoenix, AZ (602) 276-2040

Las Vegas, NV (702) 877-4302

Salt Lake City, UT (801) 796-7368

Boise, ID (208) 459-3800

Williston, ND (701) 572-8126

Page 12 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.trophytractor.com Dozers - Crawler

2017 CATERPILLAR D10T2, 3456 Hrs ................................$1,075,000 2011 CATERPILLAR D10T, 11,778 Hrs ....................................$595,000 1998 CATERPILLAR D10R ......................................................$125,000 (2) 1987/89 CATERPILLAR D10N ........................................$87,500 Ea. 2018 CATERPILLAR D9T ........................................................$845,000 1983 CATERPILLAR D9L................................................................$Call (2) 2012/18 CATERPILLAR D8T ....................................From $229,500 2004 CATERPILLAR D8R II ......................................................$125,000 (7) 2014-2019 CATERPILLAR D6T XW..........................From $164,500 (3) 2011/18 CATERPILLAR D6T XL ..............................From $109,500 2015 CATERPILLAR D6N XL, 3235 Hrs ..................................$164,500 2016 CATERPILLAR D6N LGP ................................................$139,500 (2) 2014 CATERPILLAR D6K2 LGP ..............................................$Call 2018 CATERPILLAR D6K2 XL ................................................$174,500 (2) 2019/20 CATERPILLAR D6 LGP ..............................................$Call

Attachments

CATERPILLAR 740 BED ..............................................................$5,000

Asphalt / Pavers / Concrete Equipment

2014 CATERPILLAR RM-300 ..................................................$169,500

Excavators - Crawlers

(3) 2017/18 CATERPILLAR 349FL ................................From $299,500 (2) 2013/14 CATERPILLAR 349EL ................................From $175,000 2017 CATERPILLAR 336FL, 2941 Hrs ....................................$215,000 2014 CATERPILLAR 329EL, 4134 Hrs ....................................$159,500 (2) 2015/17 CATERPILLAR 323FL ................................From $132,500 (3) 2018/19 CATERPILLAR 320......................................From $179,500 (4) 2018 SANY SY215C ..................................................................$Call

Dozers - Wheel

2015 CATERPILLAR 834K........................................................$285,000 2001 CATERPILLAR 854G ......................................................$209,500

Compactors - Padfoot / Smooth Drum

1996 CATERPILLAR 815F ..........................................................$95,000 (6) 2013/14/15/18 CATERPILLAR CP56B ........................From $79,500 2011 CATERPILLAR CS56 ........................................................$49,500 (6) 2012/14/17/18 CATERPILLAR CS56B ........................From $64,500 (6) 2013/15/17 CATERPILLAR CS66B ............................From $89,500

Motor Graders

2016 CATERPILLAR 140M3 ....................................................$199,500 2014 CATERPILLAR 140M2 VHP ..................................................$Call 2012 CATERPILLAR 16M VHP ................................................$299,500 2018 CATERPILLAR 18M3 ......................................................$769,500 2012 CATERPILLAR 24M ........................................................$309,500 (2) 2013/2015 DEERE 872GP ........................................From $129,500

Ripper

CATERPILLAR D8SS ..................................................................$24,500

Agricultural Tractors

2015 JOHN DEERE 6215R ......................................................$109,500 (3) 2018/19 JOHN DEERE 6120M ....................................From $77,500

Authorized dealer for

Winch

PACCAR PA110VS245 ..................................................................$9,500

Off-Highway Trucks

(3) 2009 CATERPILLAR 785D ........................................................$Call 2010 CATERPILLAR 777F ........................................................$259,500 (4) 1994/95 CATERPILLAR 777C ....................................From $69,500 2017 CATERPILLAR 773G ................................................................$539,500 (2) 1991 CATERPILLAR 773B ..........................................From $59,500 (2) 2014/15 CATERPILLAR 725C ..................................From $229,500

Misclleneous Equipment

2019 ROME TRCW16..................................................................$56,500 (2) 2016/18 ROME TRCW12 ............................................From $35,000 2019 ROME TACW16 ..................................................................$36,000 2018 ROME TCW28 ....................................................................$19,750 2018 ROME TCW32 ....................................................................$23,000

Scrapers - Pull

2012 CATERPILLAR 627H........................................................$459,500

Skid Steers - Track

(2) 2020 CATERPILLAR 299D3 XPS ..............................................$Call (2) 2016/18 CATERPILLAR 299D2 XPS ..........................From $59,500 2016 CATERPILLAR 299D2........................................................$65,000 (4) 2014/15/17 CATERPILLAR 299D XPS........................From $59,500 2016 CATERPILLAR 259D..........................................................$42,500 2016 CATERPILLAR 242D..........................................................$39,500 2016 CATERPILLAR 236D..........................................................$35,500

Wheel Loaders

1991 CATERPILLAR 992C ..............................................................$Call 2015 CATERPILLAR 950M, 1222 Hrs ......................................$192,500 2016 CATERPILLAR 938M ......................................................$149,500

Crawler Loaders

2018 963K..................................................................................$269,500

Crawler Carriers

(5) 2019 MOROOKA MST1500VD ..................................From $159,500 2019 MOROOKA MST1500VDR ..............................................$239,500 (4) 2018/19 MOROOKA MST2200VD ............................From $179,500 (2) 2018 MOROOKA MST3000VD ..................................From $229,500 2019 MOROOKA MST4000VD..................................................$319,500

Artic Truck

(2) 2015/16 CATERPILLAR 725C ..................................From $219,500 2017 CATERPILLAR 725C2......................................................$242,500

Water Equipment - Tower/Tanks

(2) 2018/19/20 KLEIN KPT-120 ........................................From $52,500

Water Equipment - Trucks

(5) 2014/15 CATERPILLAR 725C ..................................From $279,500 2019 FORD F750 ..................................................................................$95,000 (2) 2007/15 FREIGHTLINER M2 ..............................................From $49,500 (18) 2017/18/19 KENWORTH T370 ..................................From $89,500 (10) 2012/18/19 PETERBILT 348 ......................................From $89,500 VOLVO A25D ............................................................................$139,500

CIS Breaks Down Pandemic Impact: a Look at the Numbers The total year-overyear change in number of new public projects for January through June is 31.4 percent.

By Construction Information Systems SPECIAL TO CEG

and 2020 to gauge the impact. Interestingly, both public and private project numbers were down in January and February before governors of many Northeast states put stay-at-home orders in place and paused non-essential construction. Private projects were down nearly 25 percent in January and 14 percent in February.

The total change in number of new private projects for January through June is 34.1 percent.

There were fewer public projects as well, down 12.7 percent and 7.8 percent, respectively, in the first two months of the year. April took the biggest hit by comparison with both private and public projects out to bid down more than 56 percent. In May and June, the numbers are creeping slowly back up but still fall far short of 2019 totals. In

June, private projects were down about 30 percent and public projects were down 20. The total year-over-year change in number of new public projects for January through June is 31.4 percent. The total change in number of new private projects for January through June is 34.1 percent. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 13

Glenn B. Dorning, Inc. Parts, Sales, Service and Rentals www.gbdorning.com 1744 E. Holt Blvd. Ontario, CA 91761 909-983-2089

SALES • SERVICE • PARTS • RENTALS

Kaweah Equipment Co. www.kaweahequipment.com 10725 W. Goshen Ave. Visalia, CA 93291 559-733-2982

www.cpower.com 9200 Liberty Drive Liberty, MO 64068 816-781-8070 Wichita, KS 316-943-1231 Great Bend, KS 620-792-1364 Liberal, KS 620-624-7274 Woodward, OK 580-256-6014 Salina, KS 785-825-8291 Colby, KS 785-462-8286

Springfield, MO 417-865-0505 Joplin, MO 417-726-5373 Riverside, MO 816-415-6787 Wichita, KS 316-789-7370 Yukon, OK 405-324-2330 Maryland Heights, MO 314-427-4911 Liberty, MO 806-415-6700

Page 14 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LiuGong North America Adds Easton as Dealer in N.M.

Easton Sales and Rental, Albuquerque, N.M. branch, was appointed as the LiuGong and Dressta equipment dealer for its market area.

Easton Sales and Rentals, an earth-moving and heavy equipment rental firm in Albuquerque, N.M., recently was appointed as the LiuGong and Dressta equipment dealer for its market area.

Easton Sales and Rental is a third-generation equipment dealer, with experience buying and selling all over the world. Steve and Jeff Udelson, as partners in Easton, had been searching for a complete line

of heavy equipment that they could represent with confidence, and they feel like LiuGong Dressta machines are the answer. They are representing the entire line — from wheel loaders and excavators of all sizes and

compact equipment to Dressta dozers. “For years, we’ve been keeping a close eye on many different brands manufactured overseas,” said Steve Udelson. “The one that really impressed us over time was

LiuGong, with their many product improvements, as well as strong and steady business growth. Their commitment as a company and the commitment of their team to this market is unmatched.” 

bidadoo Posts Record Numbers in Sales, Volume, Online bidadoo had a record second quarter in sales, volume and online traffic as buyers and sellers further leverage the benefits of bidadoo’s 100 percent online model. This was highlighted by a website traffic surge of 155 percent and a new visitor web traffic spike of 188 percent (year-over-year). Sellers took advantage of the increased traffic which contributed to 35 percent sales growth during the quarter, over last year. bidadoo’s Record-Breaking Second Quarter (Q2): • Sales growth more than 35 percent • New user web traffic up 188 percent • Overall web traffic up 155 percent

• • • •

Participation from 151 countries Mobile participation over 65 percent of transactions (phone and tablet) Video demonstrations on every machine Over 124,000,000 item impressions

Below are some recent sales results by bidadoo: • 2017 Volvo A40G articulated dump truck - Sold: $240,100 • 2019 Kenworth T880 Tri/A day cab truck tractor - Sold: $125,000 • 2012 JLG G12-55A 55’ telescopic ReachForklift - Sold: $55,100

•

2014 Komatsu PC360LC-10 hydraulic excavator - Sold: $68,100 • 2017 JLG Skytrak 8042 telescopic reach forklift - Sold: $60,100 • 2017 John Deere 250G LC hydraulic excavator - Sold: $87,000 • 2011 Kleemann K017 Mobirex impact crusher - Sold: $250,000 • 2017 Genie S-85 85’ 4WD telescopic boom lift - Sold: $65,100 • 2015 John Deere 310SL 4x4 Backhoe - Sold: $67,000 For more information, please visit http://www.bidadoo.com/auctions. 

Isuzu Opens Wyo. Dealership, Now Operates in All 50 States Isuzu Commercial Truck of America, Inc. welcomed its newest dealership, located in Casper, Wyo. As a result of the addition of Isuzu Truck of Wyoming, the company now has dealerships in all 50 states. The dealership, located at 4113 W. Yellowstone Highway in Casper, is owned and operated by William F. and R. Fred DeVore. “We are thrilled to welcome the DeVore brothers and

Isuzu Truck of Wyoming to the Isuzu family,” said Shaun C. Skinner, president of Isuzu Commercial Truck of America. “The DeVores already have a strong truck presence throughout the state and are actively involved in the communities they serve. They will represent Isuzu well in the Equality State. “We are even more pleased that we can now offer parts, service, and sales to our customers in every state in the

union,” Skinner added. “Our nationwide presence gives us an advantage over some of our competitors, and it means that the performance, economy, quality, and durability of Isuzu trucks are more accessible than ever.” Additionally, Isuzu Commercial Truck of America now has 297 full-line dealerships and 13 service-only facilities across the US. Find out more, visit www.isuzucv.com. 

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ August 2, 2020 â€˘ Page 15

SMALL L MACHINE. BIG AT TITU UDE. The G-Series Skid Steers S and Compact Track Loader are majorly tough customers, because tough cusstomers like you helped designn them. Your Your input led to t increeased durability, greater engine e power, and improved fuel f capacity. And with fewer grease zerks and extendedd oil-change intervals, servicing is even simpler than beforee. $YDLODEOH LQ Í?YH PR RGHOV LQFOXGLQJ WZR UDGLDO OLIW RSWLRQV R WKH * 6HULHV FDQ WDNH GRZQ the biggest jobs â€” and your operating costs â€” all a at the same time. To learn le more, m call or visit us today.

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.honnen.com

www.doggett.com

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001 Victoria, TX 361-570-6666

Alexandria, LA 318-442-0455

Lufkin, TX 936-634-8801

Baton Rouge, LA 225-291-3750

Monroe, LA 318-343-8787

Broussard, LA 337-837-9481

Shreveport, LA 318-631-3090

Covington, LA 985-893-3005

St. Rose, LA 504-466-5577

Lake Charles, LA 337-430-3045

Tyler, TX 903-592-8900

Longview, TX 903-758-3326

Page 16 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ransome Shark Tooth Splitter Saves Hawaii Bridge Nothing good can come of a severe thunderstorm unless you happen to be on the receiving end of an emergency contract to clean up the aftermath. Cushnie Construction Company Inc. encountered this situation on the island of Kauai in Hawaii starting on March 16, 2020. “We had a hell of a flood on the island with 20 inches of rain,” said the company’s Vice President, Ralph Cushnie, noting that he believes this storm was a record breaker. “A bunch of debris came down the river and we basically had a log jam of debris at the Wailua Bridge.” Cushnie, founded 12 years ago, is a family-owned Women’s Business Enterprise run by Ralph’s wife Laura. The sitework contractor works strictly on the island of Kauai, serving private and public sector clients including local, state and federal government. Clearing the Log Jam at a Compromised Bridge The main problem was heavy erosion damage to the concrete reinforced wall near the north abutment of the bridge, and scourCushnie used two excavators and a fleet of trucks to remove tons of debris that had ing that was causing instability washed down the river and compromised the integrity of Kauai’s Wailua Bridge. around several piers, according to Hawaii Department of its primary purpose — splitting, removing it’s got that straight edge so the Crambo can Transportation (HDOT). Cushnie and loading stumps. Cushnie’s operation bite into it and start shredding.” was already clearing nearby floodcalled for more teeth because the crew The majority of the wood came from damaged areas and owns a unique The Ransome Shark Tooth stump splitter/harwould have to quarter wood on flat surfaces albizia, a tree that has been deemed an invaclamshell attachment so HDOT vester was mounted on a mid-size excavator to where the timber is not anchored. sive species in Hawaii. The wood was a bit decided to award the contractor the size down logs and stumps for processing by “We had nothing to anchor to,” he said, softer and stringier, but splitting it was still emergency contract. noting that they were cutting on pavement at challenging because the trees were still green the Crambo 6000 dual-shaft shredder. The first challenge was a 120-ft. the stadium and dirt in the other locations. since they had just been uprooted. uprooted tree that was swept downstream “We were going to put the tooth in and then The Shark Tooth delivered adequate Searching for the Right and came to rest against the side of the work it back and forth.” power, despite being mounted on a mid-size Attachment bridge. Cushnie’s crews worked around the The clock was ticking. Ransome quickly Komatsu excavator. “We had started grinding the logs and they agreed to modify the attachment by adding a clock for a week to get it removed. “It was all green so it took some effort,” More debris soon followed, but fortunate- were too big for our shredder to deal with,” second serrated edge, creating an attachment Cushnie said. “Once it dries out, you just tap ly the raging river never rose high enough for Cushnie recalled. “We were just looking on that looked like a spade with jagged edges. it and it splits.” the internet for something and we came the debris to breach or pass over the bridge. “The reason we wanted the front edge serMuch of the smaller debris was loaded “Another big rain like this could have across Ransome Attachments and the Black rated is because we were basically just pin- into the Crambo with a standard bucket. The knocked that whole bridge over,” Cushnie Splitter cone splitter,” he said. ning the wood to the ground and then wedg- Shark Tooth was required for splitting The problem was that he didn’t want to ing the point into it,” Cushnie explained. stumps and logs over six feet. Chainsaws said. Clearing debris from the bridge was job lose time on the extra processes associated “When you uncurl the arm of the excavator, were used to get the largest pieces down to one. Overhead wires prevented the use of a with hydraulic attachments, including you’re getting that cutting action on the front that size. long-reach excavator so Cushnie set up two switching hoses and unpinning buckets. edge, while going back and forth and wedgMost attachments that Cushnie looked at The alternative was to mount a hammer ing and splitting at the same time.” excavators on the one-lane bridge deck. The required thumbs to be unpinned, which machine with the clamshell scooped out the on the excavator to split the wood, but damwould have reduced productivity. The Shark debris and piled it on the deck where a five- aging the pavement in the stadium would Feeding the Crambo Shredder Tooth’s can attach to a quick coupler and man crew downsized it to manageable sec- have been unacceptable. The role of the Ransome Shark Tooth works in conjunction with an existing Cushnie learned of the Ransome Shark stump splitter/harvester was to size down thumb. This allowed Cushnie to split and tions with power tools. Another nearby excavator with a grapple loaded the material into Tooth RST 150 stump splitter/harvester. It material for feeding into the Crambo 6000 load the Crambo in one continuous process. had the functionality, but its single serrated dual-shaft shredder. The shape of the logs waiting trucks. The debris was ultimately processed into The next step was to get the debris to the edge is designed for sawing and digging out was a factor as well. mulch and given to a local coffee farm and processing sites. Desirable laydown areas rooted stumps. Dropping a log without a flat edge into the landscaper. No one can accurately predict were at a premium because of the flood so Crambo shredder would be like running on a whether Kauai will see a storm of this magCushnie dumped half in a stadium parking Adding Teeth to the Shark Tooth log in the water, according to Cushnie.” If nitude again but one thing is sure: Cushnie The Shark Tooth has a serrated edge on you put one of those six-foot logs in the hop- will be prepared with the right equipment. lot and the remainder at two other locations. The problem that remained was how to the outside blade with a flat edge and thumb per it would roll around for an hour in your For more information, visit ransomeaton the opposite side, which works well for shredder,” he said. “If you halve or quarter it, tach.com.  process the material efficiently.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 17

/ 8 -0 0,0, /& &8 -0 4 ".& .& ( 3& "& 5 25 6" -* 5: 4 " ( 3 " 2 6 "-* 5:

Ditch Witch of Oklahoma/Tulsa

Vermeer Texas-Louisiana

Meridian Utility Equipment Sales

www.ditchwitchok.com

www.vermeertexas.com

www.meridianutilityequipmentsales.com

Oklahoma City, OK 73034 405-348-4633

Baton Rouge, LA 225-665-7900

Houston (Cypress), TX 281-671-6000

Tulsa, OK 74116 918-438-1560

Irving, TX 972-255-3500

Kilgore, TX 903-988-9868

1315 Vinci Avenue Sacramento, CA 95838 916-880-5776

Page 18 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

A Higher Level of Protection

DON’T WISH YOU HAD IT, KNOW YOU HAVE IT!

Step-up the safety on your skid steer with a UL752 Level 1 ballistic door better known as the Defender Ballistic Door. Whether you are operating a hammer, auger, mower, mulcher, or a log processor you can feel secure in knowing there is a 3/4” bullet resistant door in place, to help protect your BIGGEST ASSET – YOU!

Made by contractors, for contractors

208-304-0002 Visit us @ Hearmor.com

heavy equipment

Armor PROTECTION YOU CAN COUNT ON!

Volvo’s TA15 Autonomous Hauler Wins Red Dot Award The TA15 autonomous electric hauler from Volvo Autonomous Solutions has wowed a panel of design experts in Essen, Germany, to win a Red Dot Product Design Award 2020 – a seal of high design quality from the world’s largest and most distinguished design competition. Commenting on the award, Nils Jæger, president at Volvo Autonomous Solutions, said: “We are thrilled to have won such a prestigious award as the Red Dot. It shows that we are delivering world class designs at the cutting edge of autonomous vehicle technology. We are proud to continue the Volvo Group tradition of being innovative leaders in the commercial vehicle and machine design arenas.” Autonomous Electric Ecosystem The battery-electric load carrier is a new machine concept, compared to traditional off road hauling, and forms one element of Volvo Autonomous Solutions’ TARA transport solution. It is designed to disrupt today’s off-road hauling. The hauler runs on a battery-electric drivetrain based on shared technology from the Volvo Group. The automation system uses GPS, Lidar, radar and multiple sensors. Being autonomous, the TA15 has no need for a cabin — making for a dramatically new machine profile. With a 16.5 ton (15 t) hauling capacity, TA15 forms part of the wider TARA autonomous transport

solution concept, so that a series of them can be connected together to form a "train" of machines, for maximum loading and hauling efficiency. The TA15 will be a critical element of the TARA electric and autonomous transport solution. The autonomous electric hauler was, and will continue to be, developed by Volvo Construction Equipment (Volvo CE) based on the former HX02 concept and has now been handed over for commercialization to Volvo Autonomous Solutions, a new business area of the Volvo Group. Operational since Jan. 1, 2020, Volvo Autonomous

Solutions’ objective is to "accelerate the development, commercialization and sales of autonomous transport solutions, as a complement to the Volvo Group’s current products and services." Volvo CE also won a Red Dot award itself this year, for a machine that, due to the Coronavirus outbreak, will be introduced to the market later this year. “It is exciting that two Volvo products have been awarded this internationally recognized mark of design excellence,” said Melker Jernberg, president of Volvo CE. “On top of that, it is great that this is the result of a great internal collaboration with Volvo Autonomous Solutions. Partnership is the new leadership.” 

With a 16.5 ton (15 t) hauling capacity, TA15 forms part of the wider TARA autonomous transport solution concept, so that a series of them can be connected together to form a “train” of machines, for maximum loading and hauling efficiency.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 19

HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave., Commerce City, CO (303) 287-7506 • (800) 646-6636 Durango, CO • (970) 247-4460 Grand Junction, CO • (970) 243-7090 Ogden, UT • (801) 627-0049 Salt Lake City, UT • (801) 262-7441 St. George, UT • (435) 652-8003 Casper, WY • (307) 266-4474 Gillette, WY • (307) 685-4288

MORE EEFFICIENT. MORE POWERFUL.

Rock Springs, WY • (307) 382-5284 Idaho Falls, ID • (208) 523-9915

Exclusive, three-pump hydraulic c technology for incredibly fast cycle times. Reduced tail swing with a full-sized cab. Ye eah. That’s the ZX345.

TTHIS IRRON W WILL WORK O SMARRTER.

HitachiCon nstruction.com

FMI Equipment www.fmiequipment.com 11111 E Trent Avenue Spokane, WA 99206 509-927-4071

Page 20 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORRE Conntra ctors c s RELYY ON US We e’re pro oud that D Rubber Tracks are

#1 Seellin rubbber tr brand in America.

800-36 65-7260

CALL US TODA O Y TO GET THE E BEST PRICE ON RUBBER TRA RACKS, YANMAR A PARTS A & U UNDERC AR RRIAGE PART A S

depparts.c ts com ts.c

Ashland, VA VA » Jacksonville, FL » Dallas, TX T » Cincinnati, OH » Portland,OR » Sacrament ento, CA » Schenectady,, NY » Leduc, AB

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 21

www.mustangcat.com Lufkin 936-632-6775 Bryan 979-775-7368 Nederland 409-722-7368 Channelview 281-452-7368 Houston, Bingle 713-838-7368 Houston, SW 713-838-7368 Freeport 979-233-7368 Conroe 936-788-7368

Page 22 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Expanding Driving Window May Encourage Safer Driving RULES from page 1

A petition filed by the Advocates for Highway and Auto Safety, Citizens for Reliable and Safe Highways, Parents Against Tired Truckers, the Truck Safety Coalition and the Teamsters, requests a stay of the Sept. 29 effective date of the final rule until the FMCSA administrator can further review the petition. The final rule doesn’t include a proposed provision that would have allowed covered commercial motor vehicle operators one rest break of up to three consecutive hours during every 14-hour on-duty period. That concerns the coalition. “The final rule is not in the public interest and does not meet the agency’s statutory mission in carrying out its duties to assign and maintain safety as the highest priority,” the coalition stated. “The agency had failed to address the significant risk to public safety posed by fatigued drivers of CMVs at a time when large truck crashes continue to increase.” The Specialized Carriers & Rigging Association (SC&RA) renewed a five-year exemption, through 2023, from compliance with the 30-minutes rest break requirement in the rule. It applies to qualifying oversize/overweight (OS/OW) motor carriers and drivers operating mobile cranes with a rated lifting capacity of greater than 30 tons. “Both specialized transportation and crane and rigging companies regularly find themselves addressing hours-of-service challenges that can affect public safety as well as impact operational efficiency,” maintained SC&RA. “On average, crane operators spend only one to two hours of on-duty time each trip

Trucking and construction equipment organizations, including the Specialized Carriers & Rigging Association, applauded the revised rules, which they believe will make compliance easier on drivers and carriers.

driving a crane to and from a job site; however, operators have multiple periods of unscheduled breaks when they are basically ‘at rest’ or ‘on break,’” for example, waiting for the scheduled time of the lift. The problem for specialized transport drivers, cited SC&RA, is that despite effective planning, delays occur that can affect the job when a driver must take a required 30minute rest break. “This burden may put the motoring public at risk by causing oversized loads to be forced to park on road shoulders and exit ramps,” the association maintained. “Drivers are also required by law to park

their oversize/overweight load for hours, and even days, at state lines/borders while they wait for the next jurisdiction’s OS/OW permit days/hours of operation to allow compliant passage. This regulation can be cumbersome to completing specialized moves and lifts,” noted SC&RA. The American Trucking Association applauded President Trump’s attention to the industry. “Today’s rule is the result of a two-year, data-driven process and it will result in needed flexibility for America’s professional truck drivers while maintaining the safety of our roads,” said ATA President and CEO

The FMCSA’s new Hours of Service rules, which it said provides truck drivers more flexibility as it ensures highway safety, become effective this September.

Chris Spear. “This regulation, which, while maintaining the core limitations on drivers’ work and rest cycles, makes smart changes to portions of the rules.” The Owner-Operator Independent Drivers Association (OOIDA) has lobbied over the years against the existing HOS rules, which it believes are not sensible for today’s trucking industry. It said the Notice of Proposed Rulemaking “represents a welcomed shift toward developing regulations that better reflect the realities of trucking and improve safety for all highway users.” OOIDA supports the agency’s approach, which it believes will provide drivers “more opportunities to rest when they are tired, to stay off the road during adverse driving conditions, and to maintain greater control over their own schedules.” And, the Truckload Carriers Association applauded the FMCSA for receiving input from stakeholders to craft flexible regulations while improving safety and for expediting the changes. “We especially thank the agency for moving forward with additional sleeper berth flexibility. While TCA and our members advocate for full flexibility in the sleeper berth for our drivers, FMCSA’s new regulations demonstrate that we are one step closer to achieving that goal.” Analyzing Revisions In an article on HOS, Benjamin Ross, attorney with Atlanta, Ga., law firm Fisher Phillips, wrote that the rule is a further attempt to aggressively promote efficiency while maintaining high safety standards. The revisions make significant changes, and Ross explains what they mean for the trucking industry: The new HOS rule expands the short-haul exception to 150 air-miles and allows a 14hour work shift to take place as part of the exception. The exceptions to the HOS rules are the most scrutinized section of the regulations, writes Ross, because they allow drivers to avoid creating a Records of Duty Status (RODS) using an Electronic Logging Device (ELD). “The short-haul exception for property drivers is likely the most used exception to the HOS rule. Allowing Commercial Driver’s License drivers that report daily to the same location to drive a Commercial Motor Vehicle without completing RODS or using ELDs, it affects every industry that uses CDL drivers.” The short-haul exception previously specified that drivers could operate only within a 100 air-mile radius and work 12-hour shifts. With one air mile equaling approximately 1.15 land miles, the benefits of the distance and time extensions in the revised rule is significant, believes Ross. see RULES page 42

Paving

SECTION

Paving in the Extremes Pages 23-34

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Colaska completed the roundabout project in Fairbanks ahead of winter. The project required 5,700 tons of asphalt and provided better drainage, safer access and improved durability for traffic flow that includes heavy trucks.

By Chuck MacDonald CEG CORRESPONDENT

Roadway paving occurred at night during the Alaska project. The only paving during the day was the bike lanes.

Across the country, road builders confront tight deadlines for completing their projects. Often construction teams face the end of the paving season knowing that challenging weather lies ahead. This scenario was especially true for projects in two contrasting environments, one completed at the â€œNorth Poleâ€? and the second in the California desert. Both called for precision planning and execution to complete roads that would keep the driving public safe in harsh climates. The two projects were both completed in 2019 and earned Quality in Construction awards from the National Asphalt Pavement Association. Paving contractors in Fairbanks, Alaska (just a 10-minute drive from North Pole, Alaska) encounter conditions faced nowhere else in the lower 48. The temperature contrast comes as no surprise. Local residents experience some summer days that can reach 90 F. and winters with minus 50 F.

The roads will be icy in the winter and the prospect of a bigrig driver applying the brakes and sliding through an intersection is frightening to consider. Engineers at the Alaska DOT and the construction teams also face the problems of managing the permafrost that reaches 100 ft. deep in some areas. The ground keeps the permafrost insulated during the summer months. When the natural layer is replaced with a black surface that absorbs the heat, the permafrost will melt below it. This creates large dips in the roadway. Repairing road damage caused by permafrost is an annual process. Colaska, the firm that built the Danby-Wemebly roundabout in the Fairbanks area, has used a number of strategies in the past to keep the permafrost hard underneath the road and provide a solid foundation. On one project, Colaska ran thermosyphons underground with refrigerant to keep the underlying permafrost frozen. As part of a highway safety improvement program, engineers at the Alaska Department of Transportation decided to see CHALLENGES page 26

Page 24 • August 2, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511 866/796-3211

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com Oklahoma City, OK 800/375-3339 McAlester, OK 918/310-1550 Tulsa, OK 800/375-3733 Kansas City, KS 877/851-5729

ROMCO EQUIPMENT CO. www.romco.com Austin, TX 512/388-2529 877/851-1026 Buffalo, TX 903/322-5602 Dallas (Carrollton), TX 214/819-4100 800/227-6626 Ft. Worth, TX 817/626-2288 866/966-4602 Longview, TX 903/758-5576 Midland, TX 432/234-9409 San Antonio, TX 210/648-4600 800/966-4601

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 2, 2020 • Page 25

CALIFORNIA Herrmann Equipment N CA (916) 783-9333 S CA (909) 877-5597 MONTANA/S. IDAHO/NEW MEXICO Roadtec (423) 265-0600

NEVADA/UTAH/ARIZONA Goodfellow (702) 293-7504

TEXAS Closner Equipment (210) 732-2131

OKLAHOMA Van Keppel (844) 499-6363

WASHINGTON/OREGON/N. IDAHO PacWest Machinery (800) 935-5933

WYOMING/COLORADO Power Motive (303) 355-5900

Page 26 • August 2, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Paving Contractors Beat Weather to Get Projects Done

Granite Construction took precautions for paving workers in the desert climate. CHALLENGES from page 23

change the Danby-Wemebly intersection into a roundabout. “The area had at least four trucking firms, three auto dealerships, two schools, a gas station and other businesses,” said Charlie Bohart, project engineer of Alaska DOT. “Regularly, a truck pulling two trailers would fill up with the gas and have to cross traffic to get to the proper lane. This was dangerous with the heavy traffic flow.” Local citizens were opposed when the changes were announced. But opposition quieted after the construction was completed. “The new design allows a big rig and school bus to be side by side without being hazardous,” said Bohart. “The traffic flows smoother. And there’s less buildup of ice in the winter, which can happen when vehicles are stopped at traffic lights.” Because of fluctuation in temperature and a high volume of heavy trucks, the state DOT specified a modified asphalt for the project. Modifiers in the asphalt mix cause the road to better shrink and expand with the extreme temperature gradients. Martin Gray was the project engineer for Colaska on the job. “The highly modified asphalt meant the mix was stickier than our average mix for the workers, making it hard to keep it from sticking to the shovels, rakes and rollers,” he said. “However, the additional flexibility in the pavement helps to prevent thermal cracking in the new road, which is often a problem in this area.” The Colaska team began the project in

May 2019, finishing up in September before winter. Gray noted one of the many challenges of the job — “As the temperature started dropping, we put the rollers on the fresh pavement quickly right after the paver. This enabled our workers to reach our required compaction before the asphalt cools too much and begins to harden.” This is a common problem with Alaska’s short paving season. The work team used coarse aggregate in the asphalt mix to build a road that would stand up to the heavy trucks used in the area. The road was constructed using a type 2, class A mix design that is more commonly used on airport runways throughout the state. “We widened the intersection’s footprint and placed a harder asphalt that will hold up to the heavy truck traffic,” said Gray. “We used roughly 15 percent recycled asphalt for the project.” Safety was an important concern from the beginning to the end of the project. “We had to move quickly on the job. Alaskans have a ‘get it done’ attitude because they know that winter is coming,” said Gray. “Still we strictly followed safety guidelines.” The project earned Colaska bonuses for smoothness and joint density. Desert Paving Workers on road projects in the Coachella Valley in Indio, Calif., dealt with the opposite weather extreme from Fairbanks. Emir Kocaballi, project manager of

Workers on road projects in the Coachella Valley in Indio, Calif., dealt with extreme weather.

Granite Construction’s Desert Cities Region, recalled seeing temperatures as high as 125 F. “We often see heat of more than 115 degrees.” Although Granite workers are used to hot weather, the contractor took special precautions to protect its people during the Madison Street project. • Safety meetings were held each day, • Water and electrolyte-infused drinks were provided for the crew, • Cooling neck gaiters were used to keep body temperatures down, and • Cooling tents and trailers were available for breaks. The original Madison Street was one lane in each direction with a “suicide lane” in the middle. The new road had three lanes in each direction with a turn lane in the middle. The new avenue was 1 mi. long and 75 ft. wide. The reconstruction required 16,221 tons of asphalt. The cost for the project was $8.5 million. Surprisingly in this hot, desert climate, box culverts were needed because flash flooding is not unusual. “Our workers crowned the road so water could run off in both directions,” Kocaballi said. “Our team inserted perforated pipes underground to collect water, then allow it to seep slowly through the stone bed under the road and percolate toward the water table.” The reconstruction of Madison Street in Indio was important because the area is swarmed each year by thousands of people attending the Coachella Valley Music and Arts Festival held at Empire Polo Club in Indio. The event has been held for the past

20 years. Approximately 100,000 fans crowd the desert venue each day for the sixday annual event over two weekends in April. Road designers believe the new construction will ease traffic congestion for the music fest. Because of the storm of concertgoers, Granite faced a challenging schedule. “We had to finish the road by the end of March with no excuses,” said Kocaballi. “We were able to produce the asphalt mix at our Indio plant with a 30-minute trip from plant to the job site. That kept our work flowing smoothly.” Despite the extreme heat in the desert climate, a standard Caltrans asphalt mix was all that was required. The paving team delivered a 5-in. base course of asphalt with a 1.5inch surface course. The HMA oil used was performance grade (PG) 70-10 and the mix included 15 percent reclaimed asphalt pavements (RAP). Granite often uses RAP, which allows for the team to conserve raw materials and energy. This practice also cuts emissions from operations, which is part of Granite’s sustainability mission. The road construction project required coordination with the city of Indio, the owner of the festival (Golden Voice), as well as utilities and event coordinators. Additional project partners included Albert A. Webb Associates, construction management. “I felt honored that our team was given this project,” said Kocaballi.” We take a lot of pride in our work and believe that what we did had made traveling to this large event much easier and a lot safer.”  CEG

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 2, 2020 • Page 27

Products shown with optional equipment.

MAULDIN Paving g Products... MASTERS S OF THE MA AT! T! Contact your MAULDIN N dealership today to see the newly redesigned M415XT! For more information visit us at www.4aMauldin.com.

Golden Equipment Company www.goldenequipment.com 721 Candelaria Rd NE Albuquerque, NM 87107 (505) 345-7811

1150 Madison Lane Farmington, NM 87401 (505) 326-1413

29268 Hwy 160 Durango, CO 81303 (970) 247-8830

Page 28 • August 2, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

www.modernmachinery.com Kent, WA (800) 669-2425

Pocatello, ID (800) 829-4450

Missoula, MT (800) 332-1617

Rochester, WA (800) 304-4421

Billings, MT (800) 735-2589

Eugene, OR (800) 826-9811

Spokane, WA (800) 541-0754

Kalispell, MT (800) 434-4190

Portland, OR (800) 950-7779

Boise, ID (800) 221-5211

Contact your local dealer:

Arnold Machinery Company www.arnoldmachinery.com

2975 West 2100 South Salt Lake City, UT 801-972-4000 Idaho Falls, ID 208-523-0822 Meridian, ID 208-887-6000 Twin Falls, ID 208-733-1715

Elko, NV 801-972-4000 Sparks, NV 775-356-1511 Las Vegas, NV 702-642-9000 Phoenix, AZ 602-414-1900 Tucson, AZ 520-294-7677

Pacwest Machinery www.pacwestmachinery.com

8207 South 216th Street Kent, WA 98032 800-935-5933

19255 NE Sandy Blvd Portland, OR 97230 800-929-5933

3515 N Sullivan Road Spokane Valley, WA 99216 800-938-5933

1550 Irving Road Eugene, OR 97402 866-920-5933

www.cooperequip.com 5210 N Loop 1604 E San Antonio, TX 78247 (210) 657-5151 201 Commerce City Blvd. Georgetown, TX 78626 (512) 930-5151

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 2, 2020 • Page 29

ASPHALT MANAGER

TANGO

ECONOMIZER

BOMAG OSCILLATION

VARIOCONTROL

www.komatsueq.com 1486 South Distribution Drive 4715 W. Winnemucca Blvd. Winnemucca, NV 89445 Salt Lake City, UT 84104 775-753-7557 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557

1409 E. 3850 S. St. George, UT 84790 435-986-1000

3825 Losee Road North Las Vegas, NV 89030 702-399-1004

10350 S Sandwash Rd. Myton, UT 84052 435-216-7777

900 Marietta Way Sparks, NV 89431 775-356-1334

3460 Salt Creek Rd. Casper, WY 82602 307-223-4660

www.komatsusw.com 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

6101 Pan American W Freeway NE Albuquerque, NM 505-345-8383

4520 National Park Hwy Carlsbad, NM 88220 575-628-8301

10790 S. Highway 59 Gillette, WY 82718 307-682-1445

901 Troy King Road Farmington, NM 87401 505-324-8601

1181 Burgundy Drive El Paso, TX 79907 915-872-1001

Page 30 • August 2, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years 2003 Etnyre Quad chip spreader, computerized, 10-20 extendable hopper, Cummins diesel engine, folding fear hopper, hydrostatic drive, 4WD

2001 Blaw Knox PF 5510 paver, Omni IIIA screed 1018 ½ ft w/diesel heat, power crown & slope, Cummins diesel engine, truck hitch

2013 Etnyre Centennial II distributor, 2000 gallons, BT1 computer controls, propane burners, 14 ft spray bar, Ford F750XL, Cummins ISB diesel engine, auto trans

Allen Introduces Its HDX600 Hydra-Drive Riding Trowel 2015 Volvo PT125R pneumatic roller, 9 wheels, Kubota diesel engine, hydrostatic drive, water system

2005 Etnyre Centennial II distributor, 2000 gallons, computerized w/1 ft cut-offs, diesel heat, 14 ft spray bar, Ford F750 Super Duty, Cat C7 diesel eng, 6 spd trans, 2 spd axle

New Marathon KERA10 walk behind crack sealer, 10 gallon, manual full sweep agitation, single 80,000 BTU propane burner, heated 1” discharge valve

2007 Omni 1000 screed, electric heated screed, paving width 10-19.5 ft, power crown, slope & height, vibratory screed, should fit any 6000 or 7000 series paver

2011 Laymor 8HC broom, 3 wheel broom, tow hitch, Kubota diesel engine, 8ft broom

2008 Cat AP1000D paver, AS2303 screed 10-18ft w/electric heat, power crown, slope & height, Cat C7 diesel engine

3517 Wayne White Rd., Climax, NC 27233

Allen’s HDX600 riding trowel is a hydraulically-controlled, 8 ft. (2.4 m) class ride-on power trowel that is powered by a powerful 50 hp Hatz liquid-cooled diesel engine. The HDX600 was designed with the high volume flatwork concrete contractor in mind. This riding trowel comes with dedicated panning/finishing modes, digital readouts for accurate fuel levels and diagnostics, and a large 13 gal. fuel tank for longer run times. It also is equipped with powerful pumps that help maintain excellent torque even at high rotor speeds. This makes the machine excellent for panning or finishing operations, according to the manufacturer. HDX600 standard features include: • Turbo charged 50 hp Hatz 3H50TIC liquid-cooled, Tier IV final diesel engine provides excellent power • Premium Bosch-Rexroth Hydraulic system ensures quality hydraulic response • Intelli-drive system allows the engine and the hydraulics to communicate in order to ensure peak performance, component safety and extended life • Bi-lingual digital display conveniently

The HDX600 comes with dedicated panning/finishing modes, digital readouts for accurate fuel levels and diagnostics, and a large 13 gal. fuel tank for longer run times.

shows engine diagnostics (temp, rpm, oil pressure, warnings, etc.) • Electric (Joystick mounted) single or dual blade pitch controls • Rotor Speeds up to 165 rpm • Two point, top-mount lifting system • Four point tie downs • Twin, 46 in. (116.8 cm) rotors with five bladed spiders For more information, visit www.alleneng.com. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 2, 2020 • Page 31

POWER MOTIVE CORP. www.powermotivecorp.com

5000 Vasquez Blvd. Denver, CO 80216 303/355-5900

Grand Junction, CO 970/241-1550

Colorado Springs, CO 719-576-5541

Milliken, CO 970/587-1188

Durango, CO 970/259-0455

Cheyenne, WY 307/634-5149

FOUR SEASONS EQUIPMENT www.fourseasons-equip.com

8111 Mills Road Houston, TX 77064 800-234-5007 281-807-9777

5524 West Ledbetter Drive Dallas, TX 75236 866-270-1700 214-388-1700

Roads must be built. Worlds must be connected.

What began over a century ago... Evolved into a combination of experience and innovation.

CISCO EQUIPMENT www.cisco-equipment.com

1706 S. 1st Street Artesia, NM 88210 800-748-1846

2707 Slaton Hwy Lubbock, TX 79404 877-745-9595

520 SE Loop 338 Odessa, TX 800-657-3673

620 N. Bell St. San Angelo, TX 76903 800-496-0271

WESTRAX MACHINERY www.westraxmachinery.net

19618 S. Susana Road Rancho Dominguez, CA 90221 800-411-4717

611 N. Golden Key Street Gilbert, AZ 85233 602-397-8173

19885 Temescal Canyon Road Corona, CA 92881 800-411-4717

www.sakaiamerica.com (800) 323-0535

Page 32 â€˘ August 2, 2020 â€˘ www.constructionequipmentguide.com â€˘ Paving Section â€˘ Construction Equipment Guide

Construction Equipment Guide â€˘ Paving Section â€˘ www.constructionequipmentguide.com â€˘ August 2, 2020 â€˘ Page 33

sÂŽÂŽ Ă?ÂŽĂŁ ĂŠ Ă„Â› ĂŠÂĽ ĂŠ Ă§Ă™ Â—Â›Â›Âƒ s ÂƒÂ˝Â› Ă™Ă? ĂŁĂŁĂŠ ĂŠÂ— Â—Âƒ ÂƒĂšÍŠ

APCO EQUIPMENT MENT APCO EQUIPMENT MENT

www.apcoequipment.com ent.com www.apcoequipment.com ent.com 3432 N 5th Street reet 3432 N 5th Street reet N. Las Vegas, Vegas, NV V 89032 N. Las Vegas, Vegas, NV V 89032 (800) 574-4089 89 (800) 574-4089 89

DYNAPAC SE S ISM I IC TECHNOLOGY â€“ SH AKI NG U P CO MP ACTION

Â„

Â„ Â„ Â„

www.banemachinery ery.com

2449 Manana ery.com Rd. www.banemachinery Dallas, TX 75220 220 2449 Manana Rd. (214) 352-2468 68 Dallas, TX 75220 220 T Tyler yler, TX (214) 352-2468 68 (903) 597-6641 41 Tyler, TX Tyler Ft. Worth, TX X (903) 597-6641 41 (817) 847-5894 94 Ft. Worth, TX X (817) 847-5894 94

BANE MACHINER R RY Y, INC. INC BANE MACHINER R RY Y, INC.

www.cooperequip.com perequip.com www.cooperequip.com perequip.com

ROAD MACHINER RY Y ROAD MACHINER RY Y www.roadm machineryy.com .com www.roadm machineryy.com .com

www.clboyd.com com

COOPER EQUIPMENT QUIPMENT CO. COOPER EQUIPMENT QUIPMENT CO.

C L. C. L BOYD CO.,., INC. INC C. L. BOYD CO.,., INC.

4220 West Reno o Ave. www.clboyd.com com Oklahoma City, OK K 73107 4220 West Renoo Ave. (800) OKC-BOYD â€˘ (405) 5) 942-8000 Oklahoma City, OK K 73107 Ardmore, OK K (800) OKC-BOYD â€˘ (405) 5) 942-8000 (866) 720-2693 â€˘ (580)) 224-2693 Ardmore, OK K Lawton, OK K) 224-2693 (866) 720-2693 â€˘ (580) (800) 633-2693 â€˘ (580)) /355-6667 Lawton, OK K -2693 â€˘ (580)) /355-6667

902 S.. 7th Street 902 S.. 7th Street Phoenix, x, AZ 85034 Phoenix, x, AZ 85034 (480) 545-2400 (480) 545-2400 Tuscon, con, AZ Tuscon, con, AZ (520) 623-8681 (520) 623-8681 Prescott, scott, AZ Prescott, scott, AZ (928) 778-5621 (928) 778-5621 %DNHUUVĂ€HOG &$ %DNHUUVĂ€HOG &$ (661) 695-4830 (661) 695-4830 Perris, rris, CA Perris, rris, CA (909) 355-3600 (909) 355-3600 Pico Riviera, CA Pico Riviera, CA (562) 699-6767 (562) 699-6767

DOGGETT OGGETT HEA AVY VY MACHINER RY Y SERVICES DOGGETT OGGETT HEA AVY VY MACHINER RY Y SERVICES www.doggett.com www.doggett.com

9111 North Freeway Texas Houston, ton, TX 77037 (713) B3) 493-7396 Beaumont Beaumont, aumont, TX (409) 9) 842-1754 (409) 9)Bryan 600-9290 B9) 823-1905 Bryan, TX (979) (979) 9) 213-5985 Cor rpus Christi Corpus us289-0727 Christi, TX (361) 1) (361) H1) 371-8166 Houston Longview ngview, TX (713) 3) 679-6700 (903) L3) 470-7195 Longview L3)ufkin, TX (903) 758-3326 (936) 6)Lufkin 465-9743 San n Juan, TX (936) 6) 634-8801 (956) S6) 329-6024 San Juan Tyler, Tyler TX (956) 6) 787-0001 (903) 3)Tyler T707-8085 yler Vi3)ctoria, TX (903) 592-8900 (361) 1) V 433-5017 Victoria (361) 1) 570-6666

Alexandria, ria, LA Louisiana ana (318) 319-0394 9-0394 Baton Rouge, uge, Alexandria dria LA (225) 442-0455 330-8266 0-8266 (318) 2-0455 Broussard, rd, LA Baton Rouge (337) 291-3750 443-2517 3-2517 (225) -3750 Covington, on, LA Broussard sard (985) 837-9481 807-1393 7-1393 (337) 7-9481 Lake Charles, rles, LA Covington gton (337) 893-3005 405-7535 (985) 35-7535 3-3005 3005 Monroe, e,arles LA Lake Charles (318) 460-7480 0-7480 (337) 430-3045 0-3045 Shreveport, ort, LA Monroe oe (318) 532-6234 2-6234 (318) 343-8787 3-8787 St. Rose, e, LA Shreveport port (504) 507/1923 7/1923 (318) 631-3090 -3090 St. Rose ose (504) 466-5577 6-5577

dĹšÄž ĆŒĹ˝Ä‚Äš ĆŒ ĆšĹ˝ Ć?ĆľÄ?Ä?ÄžĆ?Ć? Ć?ĆšÄ‚ĆŒĆšĆ? Ç Ĺ?ĆšĹš ĆšĹšÄž ĆŒĹ?Ĺ?ĹšĆš Ć‰Ä‚ĆŒĆŒĆšĹśÄžĆŒĆ?ÍŠ The rroad to success starts with the right parrtners! Ĺ˝ĹśÍ›ĆšĆš ĹŻÄžĆš ÄšĹ˝Ç ĹśĆ&#x;ĹľÄž ĹŹÄžÄžĆ‰ Ç‡Ĺ˝Ćľ Ä¨ĆŒĹ˝Ĺľ Ĺ?ÄžĆšĆšĹ?ĹśĹ? ĆšĹšÄž Ćš ĹŠĹ˝Ä? Ĺ˝ĹśÍ›ĆšĆš ĹŻÄžĆš ÄšĹ˝Ç ĹśĆ&#x;ĹľÄž ĹŹÄžÄžĆ‰ Ç‡Ĺ˝Ćľ Ä¨ĆŒĹ˝Ĺľ Ĺ?ÄžĆšĆšĹ?ĹśĹ? ĆšĹšÄž Ćš ĹŠĹ˝Ä? ÄšĹ˝ĹśÄžÄžÍ˜ WÄ‚ĆŒĆšĹśÄžĆŒ Ç Ĺ?ĆšĹš Ä‚ Ä?Ĺ˝ĹľĆ‰Ä‚ĹśÇ‡ Ç ĹšĹ˝ Ç Ĺ?ĹŻĹŻ Ç Ĺ˝ ĆŒĹŹ Ä‚Ć? ÄšĹ˝ĹśÄžÄžÍ˜ WÄ‚ĆŒĆšĹśÄžĆŒ Ç Ĺ?ĆšĹš Ä‚ Ä?Ĺ˝ĹľĆ‰Ä‚ĹśÇ‡ Ç ĹšĹ˝ Ç Ĺ?ĹŻĹŻ Ç Ĺ˝ ĆŒĹŹ Ä‚Ć? ĹšÄ‚ĆŒÄš Ä‚Ć? Ç‡Ĺ˝Ćľ ÄšĹ˝Í• Ĺ?ÄžĆŤĹśĹ? Ç‡Ĺ˝Ćľ ĆšĹšÄž Ć‰Ä‚ĆŒĆšĆ? Ç‡Ĺ˝Ćľ ĹśÄžÄžÄš Ç Ĺ?ĆšĹšĹ?Ĺś ĹšÄ‚ĆŒÄš Ä‚Ć? Ç‡Ĺ˝Ćľ ÄšĹ˝Í• Ĺ?ÄžĆŤĹśĹ? Ç‡Ĺ˝Ćľ ĆšĹšÄž Ć‰Ä‚ĆŒĆšĆ? Ç‡Ĺ˝Ćľ ĹśÄžÄžÄš Ç Ĺ?ĆšĹšĹ?Ĺś ĎŽĎ°Í˛ĹšĹ˝ Ĺ˝ĆľĆŒĆ?ÎŽÍ˜ Guaranteed. d. ĎŽĎ°Í˛ĹšĹ˝ Ĺ˝ĆľĆŒĆ?ÎŽÍ˜ Guaranteed. d. ÎŽ'ĆľÄ‚ĆŒĆŒÄ‚ĹśĆšÄžÄž Ä‚Ć‰Ć‰ĹŻĹ?ÄžĆ? ĆšĹ˝ Ä?ĆŒÄžÄ‚ĹŹÄšĹ˝Ç Ĺś Ĺ˝ĆŒÄšÄžĆŒĆ? Ć‰ĹŻÄ‚Ä?ÄžÄš Ä‚Ä?Ä?Ĺ˝ Ĺ˝ĆŒÄšĹ?ĹśĹ? ÎŽ'ĆľÄ‚ĆŒ Ä‚Ć‰Ć‰ĹŻĹ?ÄžĆ? ĆšĹ˝ 'ĆľÄ‚ĆŒÄ‚ĹśĆšÄžÄž Ä?ĆŒÄžÄ‚ĹŹÄšĹ˝Ç Ĺś ĆšÄžĆŒĹľĆ? Ĺ˝ĆŒÄšÄžĆŒĆ? Ć‰ĹŻÄ‚Ä?ÄžÄš Ä‚Ä?Ä?Ĺ˝ Ĺ˝ĆŒÄšĹ?ĹśĹ? ĆšĹ˝ ĆšĹšĆŒÄ‚ĹśĆšÄžÄž Äž ĎŽĎ° ,Ĺ˝ĆľĆŒ WÄ‚ĆŒĆšĆ? Ä‚ĹśÄš Ä?Ĺ˝ĹśÄšĹ?Ć&#x;Ĺ˝Ĺś ĹśĆ?Í˜ ĆšĹ˝ ĆšĹšÄž ĎŽĎ° ,Ĺ˝ĆľĆŒ WÄ‚ĆŒĆšĆ? 'ĆľÄ‚ĆŒÄ‚ĹśĆšÄžÄž ĆšÄžĆŒĹľĆ? Ä‚ĹśÄš Ä?Ĺ˝ĹśÄšĹ?Ć&#x;Ĺ˝Ĺś ĹśĆ?Í˜

Visit dynapac.us/partsguarantee for detaails. Visit dynapac.us/partsguarantee for detaails.

Your Pa Partner on thee Road R Ahea ad

Follow Dyynapac North America

dynapaac.us | 800 -651- 00 033

Ćľ ĹšĹśĹ˝ĹŻĹ˝ ĆŒ Äž Äž ĹśĆš Ć? Ĺ? Ä‚ĹľÄ‚Ĺ?Äž Ä?ĹšĹ?ĹśÄžÍ˜

7651 Ronson onson Road 7651 Ronson onson Road San Diego, go, CA 92111 San Diego, go, CA 92111 (858) 278-8351 (858) 278-8351 1330 W Mission Road 1330 W Mission Road Escondido, do, CA A 92029 Escondido, do, CA A 92029 (760) 739-9100 (760) 739-9100 440 West st Aten Road 440 West st Aten Road Imperial, al, CA 92251 Imperial, al, CA 92251 (760) 355-7700 (760) 355-7700 4726 Convoy onvoy Street 4726 Convoy onvoy Street San Diego, go, CA 92111 San Diego, go, CA 92111 (858) 278-8338 (858) 278-8338

2506 Slaton Highway hway www.beeequipmentsales.com tsales.com Lubbock, TX 79404 9404 2506 Slaton Highway hway (806) 745-15111 Lubbock, TX 79404 9404 (806) 745-15111

www.clairemontequipment.com ontequipment.com www.clairemontequipment.com ontequipment.com

17474 Judson udson Road 5210 Loop 1604 17474NJudson RoadE San Antonio, TX 78247 San Antonio, TX 78247 (210) 657-5151 (210) 657-5151 201 Commerce mmerce Blvd. 201 Commerce mmerce Blvd. Georgetown, own, TX 78626 Georgetown, own, TX 78626 (512) 930-5151 (512) 930-5151

BEE EQUIPMENT SALES ALES LTD. L www.beeequipmentsales.com tsales.com BEE EQUIPMENT SALES ALES LTD. L

CLAIREMONT NT EQUIPMENT CLAIREMONT NT EQUIPMENT

Page 34 • August 2, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

KIRBY-SMITH MACHINERY INC.

NUECES POWER EQUIPMENT

MODERN MACHINERY

4RIVERS EQUIPMENT

www.kirby-smith.com

www.nuecespower.com

www.modernmachinery.com

www.4riversequipment.com

6715 W. Reno Oklahoma City, OK 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 918-438-1700 Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600

Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000 Waco, TX 254-261-1370

Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton, TX 915-541-0066 Houston, TX 713-247-0066 San Antonio, TX 210-310-0066

Spokane, WA 800-541-0754 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Portland, OR 800-950-7779 Eugene, OR 800-826-9811

Boise, ID 800-221-5211 Pocatello, ID 800-829-4450 Missoula, MT 800-332-1617 Kalispell, MT 800-434-4190 Billings, MT 800-735-2589

Fort Collins, CO 970-482-7154 Frederick, CO 800-490-6162 Colorado Springs, CO 800-364-3029 Pueblo West, CO 719-547-3505 Albuquerque, NM 505-884-2900 Farmington, NM 505-326-1101

HONNEN EQUIPMENT CO. www.honnen.com Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441

Ogden, UT 801-627-0049 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 35

From 78 to 536 Horsepower, you’ll find the most superior performing line of T4F dozers to meet the needs of the most demanding jobsite. You’ll find lower initial acquisition costs, and a lower overall total cost of ownership. You’ll find the industry’s best total coverage warranty. And you’ll also find a rapidly growing US Dealer network – with complete parts and service support. Go ahead and search for a better value in the market. You won’t find one. Period.

Our Dozers are Engineered for your Business: + High Productivity + High Drawbar Pull + Stability + Precise Control + Excellent Visibility & Maximum Operator Comfort + Move More Material in Less Time + Optimum Owning & Operating Costs + Versatility Across A Wide Range of Applications + Durability You Can Depend On

Contact a Sales Rep about Competitive Financing Available! Mega Machinery Co. 12215 Highway 67 • Lakeside, CA 92040 (888) 883-7618

www.megamachineryco.com

ENGINEERED FOR YOUR BUSINESS.

Page 36 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

John Deere Announces New Vision, Operating Model to Integrate Technology Deere & Company (DE) announced a new vision and operating model in order to accelerate its success in the integration of smart technology innovation with Deere’s legacy of manufacturing excellence. The Deere Smart Industrial strategy is designed to unlock new value for customers and to help them become more profitable and sustainable, while simultaneously revolutionizing the agriculture and construction industries through the rapid introduction of new technologies. To ensure success, actions will be concentrated on the following three focus areas: Production Systems: A strategic alignment of products and solutions around Production Systems roadmaps — which capitalizes on Deere’s knowledge of its customers and how they work. The new production systems structure enables the company to drive an integrated product roadmap and related investments that span all aspects of a customer’s jobs and to more fully meet customer needs. Technology Stack: Investments in technology as well as research and development that deliver intelligent solutions to Deere customers through an intuitive technology stack made up of hardware, embedded software, connectivity, data platforms, and applications. The Deere family of “smart” machines, systems and solutions unlocks customer economic value through enhanced precision, automation, speed and efficiency not possible previously. Lifecycle Solutions: The enterprise integration of Deere’s aftermarket and support capabilities to more effectively manage customer equipment, service and technology needs across the full lifetime of a John Deere product and with a specific lifecycle solution focus on the ownership experience. “As Deere businesses and those of its customers become more competitive and dynamic, Deere’s track record of technological innovation puts it in a position to anticipate, respond and outpace those dynamics by offering cutting-edge solutions to enhance customers’ productivity, profitability and sustainability,” said John May, chairman and chief executive officer. “The new operating model represents a leap forward in performance for

the company from an already strong starting point.” Organization, Personnel Assignments Effective June 16, 2020, the following individuals will lead redesigned or newly created business units under the Smart Industrial Operating Model: Cory J. Reed has been appointed to the new role of president, Worldwide Agriculture & Turf Division for Production & Precision Agriculture Equipment and for the Sales & Marketing Regions of the Americas and Australia.

John H. Stone

In this new role, Reed will be responsible for leading a team to define, develop and deliver equipment solutions to unlock customer value for production-scale growers in large grains, small grains and cotton/sugar. Markwart von Pentz has been appointed to the new role of president, Worldwide Agriculture & Turf Division for Small Ag & Turf and for the Sales & Marketing Regions of Europe, CIS, Asia and Africa. Von Pentz and his team will be responsible for defining, developing and delivering fit-for-purpose products and solutions to support mid-size and small growers globally, as well as for turf customers. The unit is principally organized around production systems for dairy and livestock as well as highvalue crops. Recently appointed as senior vice president, Intelligent Solutions Group, Jahmy J. Hindman has been named to a new position as the chief technology officer, reporting to the CEO. Hindman will oversee the Intelligent Solutions

Group, responsible for Deere’s end-toend technology stack, shared enterprise engineering, and John Deere Electronic Solutions product delivery. Marc A. Howze, currently serving as chief administrative officer, will continue in that role while also assuming enhanced responsibilities in a new role as group president, Lifecycle Solutions — responsible for leading a team focused on the enterprise-level integration of aftermarket and support capabilities, and a focus on the full ownership experience over the lifetime of Deere’s products. Meanwhile, the following members of the leadership team will continue in their current roles and will continue reporting to the CEO: • Rajesh Kalathur, president, John Deere Financial and chief information officer • Ryan D. Campbell, senior vice president and chief financial officer • Mary K.W. Jones, senior vice president, General Counsel & Worldwide Public Affairs As previously announced, John H. Stone will assume his new role as president, Worldwide Construction & Forestry and Power Systems on July 1. Deere’s Construction and Forestry division, which was recently organized along production systems for earthmoving, roadbuilding and forestry, will now more fully leverage the technology stack and lifecycle solutions in the future. “After 183 years of innovation, Deere continues to transform how it operates to build a more customer-driven and streamlined, nimble organization for the future,” said May. “I couldn’t ask for a more talented, dedicated and focused team to lead us there.” In order to realize the Smart Industrial vision, Deere will adopt a more disciplined approach to capital allocation by devoting research and investment dollars to the most promising and profitable opportunities. Deere plans to dramatically accelerate the speed with which the company brings priority technology to market to drive value creation and capture it more quickly. “The new operating model will help us respond to changing market conditions with greater speed and efficiency,” May said. For more information, visit www.JohnDeere.com. 

CISCO EQUIPMENT www.cisco-equipment.com 1706 South 1st Street, Artesia, NM 88210 575-748-1314 Odessa, TX • 432-550-9181 Lubbock, TX • 806-745-9595 San Angelo, TX • 325-653-2121

FOUR SEASONS EQUIPMENT, INC. www.fourseasons-equip.com 8111 Mills Rd., Houston, TX 77064 • 800-234-5007 Dallas TX • 866-270-1700

NUECES POWER EQUIPMENT www.nuecespower.com 7510 IH-37 Access Rd., Corpus Christi, TX 78409 361-289-0066 Laredo, TX • 956-725-0066 San Antonio, TX • 210-310-0066 San Benito, TX • 956-361-0066 Victoria, TX • 361-576-0066 El Paso, TX • 915-541-0066

PORTER GROUP USA www.portergroupusa.com 13013 Temescal Canyon Rd, Corona, CA 92883 951-674-9999 Pacoima, CA • 818-834-0102 Newark, CA • 510-713-7368

MECOM EQUIPMENT www.mecomequipment.com 4546 N Wilson Way, Stockton, CA 95205 209-466-5135

JET CITY EQUIPMENT www.jetcityequipment.com 33345 SR 20, Oak Harbor, WA • 360-675-4441 Marysville, WA • 360-651-9079 Wenatchee, WA • 509-888-8181

R & S INDUSTRIES, INC. www.rsindinc.com 951 CR G, Clovis, NM 88101 575-769-8659

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 37

Step Inside Your Comfort Zone Because operator convenience is a priority for Hyundai, every Hyundai HX series excavator gives the operator a level of comfort typically reserved for luxury automobiles.

All-day comfort starts with the fully adjustable, heated air-suspension seat and full-surround climate control system. You also get Bluetooth MP3 radio and handsfree calling, as well as cup holders and a lunchbox storage area.

More standard features. More value.

Page 38 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar 992G Wheel Loader, 1:50 scale - $100

Caterpillar D7E Track-type Tractor w/ Pipe line configuration, 1:50 scale - $115

Caterpillar AP-1050 Asphalt Paver, 1:50 scale - $100

Terex 33-07 Quarry Truck, 1:40 scale - $125

Caterpillar 14M Motor Grader, 1:50 scale - $100

Caterpillar 836G Landfill Compactor, 1:50 scale - $85

Caterpillar 245 Excavator, 1:50 scale - $100

John Deere 850C Dozer, 1:50 scale - $50

Allis Chalmers Forty-Five Grader, 1:50 scale - $75

Caterpillar 777D Off-Highway Mining Truck, 1:50 scale - $85

John Deere 400D Articulated Dump Truck, 1:50 scale - $40

Caterpillar 323F Excavator w/thumb, 1:50 scale - $80

JCB TLT25D Teletruck High Lift, 1:35 scale - $40

Caterpillar D5G XL Track-Type Tractor, 1:50 scale - $70

Volvo L60H Wheel Loader, 1:50 scale - $75

Caterpillar CB-534D XW Vibratory Asphalt Compactor, 1:50 scale - $60

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Email – bmckeon9@gmail.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 39

Four Seasons Equipment

Porter Group USA

Orion Equipment

8111 Mills Rd. Houston, TX 77064 800-234-5007 Dallas, TX 866-270-1700 www.fourseasons-equip.com

13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.portergroupusa.com

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Page 40 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Conrete, Steel Pylons Unique to Job Webber Construction photo

Kirby-Smith Machinery www.kirby-smith.com 6715 W. Reno Ave Oklahoma City, OK 73127 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 800-375-3733

Amarillo, TX 800-283-1247 Lubbock, TX 866-289-6087 Odessa, TX 877-794-1800

Abilene, TX 877-577-5729

Unique to this bridge is the concrete and steel pylon and truss. The four pylons will consist of 325.6 cu. yds. of concrete and the steel truss with cable system will weigh 357,962 lbs. The pylons will reach 112 ft. into the air and the steel truss will span over the bridge a total of 504 ft. BRIDGE from page 1

Tri-West Tractor, Inc.

will serve as a connector for commuters and a grand entrance into the city for the tens of thousands of drivers who pass through this section of SH 114 daily. Two pedestrian bridges, now demolished, provided access to Texas Stadium from the parking lot. Construction Details The project comprises five individual bridges, including ramps, being built to the main truss bridge. Bridges 1A (for vehicle), 1B and 1C (235 ft.-long, for pedestrians) span SH 114, with bridge 2 (156 ft.-long) spanning over the eastbound frontage road and bridge 3 (180 ft. long) spanning over the westbound frontage road and DART orange line. “Unique to this bridge is the concrete and steel pylon and truss,” said TxDOT. “The four pylons will consist of 325.6 cubic yards of concrete and the steel truss with cable system will weigh 357,962 pounds. The pylons will reach 112 feet into the air and the steel truss will span over the bridge a total of 504 feet.” The materials required for the 500 ft. long deck (62,838 sq. ft.) are considerable – 5,143 cu. yds. of concrete and 1.4 million lbs. of rebar. “Bridge 1A consists of U-beams,” said Shahriar Azad, BridgeFarmer’s project manager of the Signature Bridge Project. “The outside pedestrian bridges, 1B and 1C with oval and parabolic shapes, are specially designed concrete structures with post-tensioning cables. Separating the bridges helped in designing and constructing the main bridge. Other unique features include the tall pylons with a truss and cable system that were designed to minimally interact with the main vehicular bridge. The pylons are located within the MSE select fill embankment in between the main bridge [1A, 1B, and 1C] and bridges over the frontage roads [2 and 3] in the approaching ramp-cross street intersection areas. This simplifies the design and construction.” The bridge is being constructed via a design-bid-build method. David Springob, the city of Irving’s engineering manager of the Department of Capital Improvement Programs, stressed the importance of the aesthetics, which include lighting elements for the truss and canopies over the pedestrian walkways. “It’s not a true suspension bridge, but it has aesthetics of one,” he said. “The walkways have a fence with decorative mustangs on the face and canopies on the roof that allow for

www.tri-westtractor.com

Webber Construction photo

6281 Southfront Road Livermore, CA 94551 925-455-8200

The bridge — designed by Bridgefarmer & Associates Inc. — will serve as a connector for commuters and a grand entrance into the city for the tens of thousands of drivers who pass through this section of SH 114 daily.

the sun to come through, but also provide shade as you walk across the bridge. We put irrigation on top of the bridge for vegetation. This is an iconic bridge for the city and it makes Irving look like a destination.” “The city wants their citizens to be proud of this bridge and it envisioned one with unique aesthetic features where citizens can gather from the nearby planned residential/commercial facilities and meet before or after riding the DART trains on the sidewalks of the bridge,” said Azad. “TxDOT and Bridgefarmer engineers worked collaboratively with the city to develop the unique design. Bridge 3 was designed with the options to add escalator and/or an elevator from the bridge sidewalk to the DART station platform under the bridge.” With the future DART station and bus transfer facility, the bridge will be part of an intermodal facility. “The sidewalks on the both sides are very wide with a maximum width of 32 feet,” said Azad. “The sidewalk geometry is unique; with an appearance of oval shape from the top and half parabolic shape from the side of the bridge. Both the sidewalks are covered with canopies consisting of Kalwal insulated translucent fiberglass sandwich panel system for protection against Texas summer heat.” Aesthetic Design The sidewalks are designed with colored textured concrete, along with planter boxes and an irrigation system. “The perimeter wall of the planter boxes are designed to be wide so they can be used as benches if someone wants to rest on the bridge,” said Azad. “The bridge also was designed with unique LED illumination fixtures that can be programmed to change colors. It will appear as one wide bridge to the travelling motorists and pedestrians, but the see BRIDGE page 42

Ditch Witch of East Texas www.witchequipment.net 7717 Highway 69 Tyler, TX 75706 903-592-6226

Ditch Witch of Arizona www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351 Tucson, AZ 520-579-0261

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 41

Waukesha-Pearce Industries, Inc.

Garton Tractor Inc.

Power MotiveCorporation

www.wpi.com

www.gartontractor.com

www.powermotivecorp.com

12320 South Main St. Houston, TX 77035 713-551-0506 Tomball, TX 281-351-9016 Corpus Christi, TX 361-884-8275 San Antonio, TX 210-648-4444

Beaumont, TX 409-721-5305 Edinburg, TX 956-386-0107 Austin, TX 512-251-0013 Buffalo, TX 903-322-7150

4088 Russell Road Fairfield, CA 94534 707-425-9545 Santa Rosa, CA 707-586-1790 Ukiah, CA 95482 707-468-5880

DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

Milliken 970-587-1188

Colorado Springs 719-576-5541

Cheyenne 307-634-5149

Grand Junction 970-241-1550

Durango 970-259-0455

Nueces Power Equipment www.nuecespower.com 4697 FM 1516 N Converse, TX 78109 210-310-0066 7667 N Sam Houston Pkwy Humble, TX 77396 713-247-0066

Page 42 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Service Rules to Take Effect Sept. 2020 RULES from page 22

“It will allow businesses to expand operations without creating RODS or rotating drivers to keep them eligible for the exception within a rolling 30day period. The new rule will be much like the short-haul exception applied to vehicles that do not require a CDL. Addressing a shortage of CDL drivers, this rule may also help businesses outside the trucking industry to pursue additional work because they will need fewer CDL drivers,” he wrote. The rule expands the driving window during adverse driving conditions by up to an additional two hours. Though it still allows only 12 hours of driving, the rule increases the driving window from 14 to 16 hours for property carriers and 17 hours for passenger carriers under adverse driving conditions. The definition of “adverse conditions” remains the same, noted Ross, but the new rule specifies drivers may determine when such conditions exist. “Finding that expanding the driving window will encourage slower driving and provide drivers more time to both complete their run or reach a safe location, the FMCSA believes that the rule change will make the roads safer,” he wrote. The HOS rule requires a 30-minute break after eight hours of driving time instead of on-duty time, and allows an on-duty/not driving period to qualify as the required break. The current rule

reads that drivers are off-duty during their break and must take a break after being on-duty for eight hours, regardless of their time spent driving. A driver not actively driving for at least 30 minutes counts as the required break. “The agency believes that this rule will not decrease the breaks that drivers take, instead supplying flexibility for when they take a continuous 30-minute break. Now drivers can count paperwork, fueling and loading and unloading as breaks,” noted Ross. The revision modifies the sleeper berth exception to allow a driver to meet the 10-hour minimum off-duty requirement by spending at least seven, rather than at least eight hours of that period in the berth. It also specifies a minimum off-duty period of at least two hours spent inside or outside of the berth, provided the two periods total at least 10 hours, and that neither qualifying period counts against the 14-hour driving window. Currently, the sleeper berth rule requires an eight-hour period in the berth and a two-hour off-duty period that counts against the driving window. “Considering that most drivers sleep between six and eight hours, the FMCSA reasons that requiring them to spend a full eight hours in the sleeper berth simply limits their ability to take more rest breaks,” wrote Ross. “The new rule requires that drivers are off duty for 10 hours broken into

two periods: one of at least seven hours in the sleeper berth, and one of at least two hours off-duty. Together, neither counts against the driving window,” he continued. Like the other changes, this revision to the sleeper berth rule gives drivers more flexibility, allowing them to take more breaks to nap and rest, noted Ross. “The FMCSA believes that this change will increase efficiency while maintaining safety, because studies show that most drivers sleep between six to eight hours and naps and breaks allow drivers to avoid physiological sleepiness or performance deficits.” Saving Lives, Money FMCSA’s rule “modernizing” hours of service regulations is estimated to provide nearly $274 million in annualized cost savings for the U.S. economy and American consumers, said Chao in announcing the final rules. “The trucking industry is a key component of the national economy, employing more than seven million people and moving 70 percent of the nation’s domestic freight,” she continued. “FMCSA’s final rule is crafted to improve safety on the nation’s roadways. The rule changes do not increase driving time and will continue to prevent commercial motor vehicle operators from driving for more than eight consecutive hours without at least a 30minute break.”  CEG

‘Gateway to Irving’ Nears Completion BRIDGE from page 40

main bridge crossing was designed as three separate bridges 1A, 1B, and 1 C with one-inch open joint in between them due to complexity associated with the function and constructability of the structure. He added that BridgeFarmer also designed the water and sewer lines for the city, which are adjacent to the bridge and will be connected to the DART station (on the northwest side of the bridge). Traffic was impacted with night and weekend lane closures as the work progressed. Crews currently are installing the canopies over the walkways on each side of the bridge. The fence on the bridge has been installed and the ornamental Irving Mustangs have been fabricated, which will be installed on fences. The truss currently is setting on the bridge deck, and sometime this summer it will be hoisted by a crane and set on top of the lower pylons already set. The upper steel pylons, which are being fabricated, will be set on top of the lower pylons. Bridge cables will connect the upper pylons to the truss and canopies – this will be done after all the components all in place. “A major part of the construction took place over the existing SH 114 TEXpress managed lanes,” said TxDOT.

“Those express lanes, which feature tolls to help manage congestion in the lanes, provide a reliable alternative to traveling to and from downtown Dallas and DFW Airport. Construction of the bridge caps over the TEXpress lanes was redesigned to allow the TEXpress lanes to remain open underneath. That led to some schedule impacts. The project is now expected to be complete in October.” TxDOT added that it has had a longstanding relationship with the city. “We have been working together for years to bring improvements to the area. Development, connectivity and accessibility sum up the goals of this project. In partnering with the city, we are constructing a bridge will serve as a catalyst for the development of the area. It will be accessible to motorists, pedestrians and public transit. “The bridge will bring economic growth and development to the area by attracting developers,” added TxDOT. “Serving as a gateway to Irving, it will allow for easy access across the freeway. This project is unique because the city will have bragging rights with its very own signature bridge. The aesthetic features, funded by the city, will incorporate elements to resemble the old Texas Stadium. TxDOT is pleased to work with the city of Irving to complete this highly anticipated project.”  CEG

www.roadmachinery.com Phoenix, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 520-623-8681 Bakersfield, CA 661-695-4830 Hayward, CA 510-659-1903 Fresno, CA 559-834-3149 Mojave, CA 661-824-2319 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540 Santa Rosa, CA 707-544-4147

ROAD MACHINERY LLC

www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Durango, CO 970-259-0455 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188

POWER MOTIVE CORPORATION

Cheyenne, WY 307-634-5149

www.komatsueq.com 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557

1409 East 3850 South St. George, UT 84790 435-986-1000

3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334

10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 43

WAUKESHA-PEARCE INDUSTRIES, INC.

www.wpi.com 12320 S. Main Street • Houston, TX 77035 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016

3D AUTOMAT TION INCREASES ASES YOUR PRODUCTION N • Dig to grade accurately urately without slowing down wn • No worry grading because ecause there is no over diggingg • The machine ine you have been waiting for: r: Big, Fast, Accurate te

www.kirby-smith.com 6715 W Reno Avenue • Oklahoma City, OK 73137 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370

KIRBY-SMITH MACHINERY INC.

www.komatsusw.com 6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383

4520 National Park Hwy • Carlsbad, NM 88220 575-628-8301 901 Troy King Road • Farmington, NM 87401 505-324-8601 1181 Burgundy Drive • El Paso, TX 79907 915-872-1001

www.clairemontequipment.com 7651 Ronson Road • San Diego, CA 92111 858-278-8351

CLAIREMONT EQUIPMENT 1330 W Mission Road • Escondido, CA 92029 760-739-9100 8520 Cherry Avenue • Fontana, CA 92335 909-429-9100 440 West Aten Road • Imperial, CA 92251 760-355-7700 81-501 Industrial Place • Indio, CA 92201 760-863-5558

4726 Convoy Street • San Diego, CA 92111 858-278-8338

SUPP PORTED WITH PRIDE

Page 44 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

Page 46 • August 2, 2020 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

see CHART page 56

Model

CASE

580N 580 Super N 580 Super N WT 590 Super N 580N EP

JCB

1CXT 3CX Compact 3CX 3CX-14 3CX-14 Super 3CX-15 Super 4CX-14 Super 4CX-15 Super

Loader SAE HP (kw)

Loader Lift Capacity lbs. (kg)

Loader Breakout Force lbs. (kg)

83 (62) 95 (71) 95 (71) 108 (81) 68 (51)

6,803 (3,086) 7,044 (3,195) 8,425 (3,821) 8,202 (3,720) 6,503 (2,950)

10,622 (4,818) 10,947 (4,965) 10,873 (4,932) 12,776 (5,795) 9,607 (4,358)

11.9 (3.6) 12.1 (3.7) 12.0 (3.7) 13.1 (4) 11.7 (3.6)

49 (36.3) 74 (55) 74 (55) 74 (55) 109 (81) 109 (81) 109 (81) 109 (81)

1,466 (665) 3,364 (1,526) 7,705 (3,495) 7,670 (3,479) 9,233 (4,188) 10,225 (4,638) 10,225 (4,638) 10,225 (4,638)

5,180 (2,350) 8,285 (3,758) 13,603 (6,170) 13,603 (6,170) 13,603 (6,170) 13,603 (6,170) 13,728 (6,227) 13,728 (6,227)

8-9 (2.67) 12-3 (3.72) 15-6 (4.72) 14-0 (4.27) 14-0 (4.27) 15-3 (4.65) 14-0 (4.27) 15-3 (4.65)

69 (52) 100 (75) 103 (77) 113 (84) 103 (77) 116 (87) 148 (110)

6,610 (2998) 6,602 (2995) 7,390 (3352) 7,244 (3286) 7,225 (3277) 6,967 (3160) 9,866 (4475)

9,564 (4334) 9,512 (4313) 10,541 (4782) 10,598 (4803) 10,608 (4813) 10,361 (4701) 16,539 (7505)

11.4 (3.48) 11.1 (3.38) 11.3 (3.42) 11.9 (3.63) 12.0 (3.65) 13.0 (3.97) 14.6 (4.45)

13.7 (4.16) 14.1 (4.30) 14.3 (4.35) 15.1 (4.59) 13.4 (4.08) 15.9 (4.85) 17.3 (5.26)

23.6 (38.0) 22.8 (36.7) 23.1 (37.1) 23.9 (38.4) 24.7 (39.7) 23.9 (38.4) 22.9 (36.9)

13,822 (6270) 14,669 (6654) 15,872 (7199) 16,571 (7516) 17,554 (7962) 17,786 (8068) 25,588 (11,607)

24.3 (18.1) 47.1 (35.1) 63 (47)

1,301 (590) 2,848 (1292) 3,960 (1796)

2,343 (1,062) 4531 (2,055) 5,992 (2,717)

6.4 (1.9) 7.7 (2.4) 10.9 (3.3)

8.3 (2.5) 10 (3) 14.2 (4.3)

11.1 (17.8) 14 (22.5) 15.5 (24.9)

4,001 (1,815) 7,205 (3,268) 8,925 (4,048)

8,287 (3,759)

10,341 (4,691)

13.8 (4.2)

17.10 (5.4)

24 (38)

16,138 (7,320)

7,996 (3,627) 7,606 (3,450) 7,996 (3,627) 7,833 (3,553)

12,004 (5,444) 14,711 (6,672) 12,004 (5,444)) 14,253 (6,465)

12.5 (3.81) 12.5 (3.81) 12.4 (3.77) 12.8 (3.90)

18.41 (5.61) 18.41 (5.61) 18.91 (5.76) 18.91 (5.76)

22.5 (36.2) 22.5 (36.2) 22.5 (36.2) 22.5 (36.2)

17,560 (7,965) 17,730 (8,042) 18,525 (8,403) 18,525 (8,403)

JOHN DEERE 310L EP 310L 310SL 310SL HL 315SL 410L 710L

KUBOTA B26TLB L47TLB M62TLB

MECALAC CE UK LTD TLB840R

74 (55)

NEW HOLLAND B95C B95C TC B95C LR B110C

97 (72) 97 (72) 97 (72) 110 (82)

Backhoe Loading Height ft. (m)

Max Digging Depth ft. (m)

14.9 (4.5) 14.6 (4.4) 14.6 (4.4) 15.6 (4.8) 15 (4.6) 10-1 (3.08) 14-2 (4.33) 18-6 (5.63) 18-6 (5.63) 18-6 (5.63) 20-1 (6.12) 18-6 (5.63) 20-1 (6.12)

Travel Speed 4th Gear Fwd MPH (kmh)

24.6 (40) 24 (38.8) 24.1 (38.8) 25.2 (40.6) 21.3 (34) 4.6 (7.5) 24.9 (40.1) 22.8 (36.7) 22.8 (36.7) 26 (41.8) 26 (41.8) 26 (41.8) 26 (41.8)

Operating Weight lbs. (kg)

16,589 (7,525) 17,269 (7,833) 20,077 (9,107) 20,532 (9,313) 15,810 (7,171) 9,572 (4,342) 13,514 (6,130) 17,196 (7,800) 17,704 (8,030) 18,614 (8,443) 19,090 (8,659) 19,172 (8,696) 19,648 (8,912)

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 2, 2020 • Page 47

GET MORE DONE WITH ONE. Why run two machines when one will do? Whether W you’re loading truccks, busting up blacktop, placing pipe, diggging trenches, or moving maaterials, an L-Series Backhoee is more than up to the taskk. By listening and responding to our customerss, these versatile machines ffeature improved hydraulic systems for additional lift capability and supeerb multifunction performan nce. And rugged EPA Final Tier 4/EU Stage IV V diesel engines* meet rigidd emission regulations, enabbling work in nonattainment areas. The result: our most versatile backhoes ever. TTak ake advantage g of un nrivaled capability. p y *Interim Tier 4/Stage IIIB on the 310L EP.

PAPÉ MACHINERY

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.papemachinery.com

www.honnen.com

www.doggett.com

Newark 510-790-3600

Rohnert Park 707-584-9161

Sacramento 916-922-7181

Gilroy 408-848-4150

French Camp 209-983-8122

Redding 530-241-4555

Fowler 559-834-4774

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441

St. George, UT 435-652-8003 Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001

Victoria, TX 361-570-6666

Longview, TX 903-758-3326

Alexandria, LA 318-442-0455

Lufkin, TX 936-634-8801

Baton Rouge, LA 225-291-3750

Monroe, LA 318-343-8787

Broussard, LA 337-837-9481

Shreveport, LA 318-631-3090

Covington, LA 985-893-3005

St. Rose, LA 504-466-5577

Lake Charles, LA 337-430-3045

Tyler, TX 903-592-8900

Page 48 â€¢ August 2, 2020 â€¢ www.constructionequipmentguide.com â€¢ Backhoes & Attachments Section â€¢ Construction Equipment Guide

If you h hav ve one off tth these ('HHUH &DVH -& -&%Â«

Your Tooth Chang ge-ou o ts Just Became EASI E E ER! Uses your u existing s sid pin pi s an sh a ks! ks!

Fielld proven for over three ree years! 233SP P Sharp Penetration P

233ST9 Star Tig ger

233TT7 Twin Tiger

23 33TF Fa ang Style

233F Flared Style S

233TR R3 Triiple Tiger

Converts your side d pin shank ks to an easy, s top locking n system! Patented 233 Series Direct Repla R cement f or o Flexpi l nÂ® Style Teet e h

Trip ple Tig ger

Selff--Sharpe ening Design! Reversible! Fits All 230 0 Shanks!

Hens e le ey style 156 and n 290 Series s also available

Ba ackhoe Owner/O Operato or

Â®

TOO OTH COMP PANY

Dealer Inquiries Welcom D me For o a parti t cipating dealer near yo ou, call 80 8 HL TOOTH ( 80 8 45 6 6684) or visit us a ww w w. w hlt h tooth h.co c m 143.2013 43.2013 013

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 2, 2020 • Page 49

Page 50 • August 2, 2020 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

Cat 440, 450 Backhoe Loaders Deliver Performance, Comfort The Cat 440 and 450 center pivot models provide increased lifting performance, high breakout forces and improved operating comfort and ergonomics. The addition to the Cat backhoe loader model line-up, the 440 boasts a 25 percent backhoe lifting improvement over the 430F2 and redesigned single tilt loader arms providing parallel lift and versatility in a multitude of applications. The 450 offers 15 percent higher backhoe lifting capacity than the 450F and introduces an all new cab for increased operator comfort. Lift and tilt breakout forces also have significantly increased on both the 440 and 450 to improve machine productivity. A more balanced weight design and longer backhoe stabilizer legs improve operating stability. The stabilizer systems can be equipped with available guards to prevent damage to the cylinder rod, and optional leg plate guards prevent material build-up on the underside of the stabilizer leg. The powertrains for both models are anchored by the Cat C4.4 ACERT engine that meets stringent Tier IV Final emissions standards using a service-free SCR solution for improved operating efficiency. The 440 and 450 optimizes engine speed and pump displacement for performance. The standard Autoshift transmission features a sixth gear for improved roading performance, and optional Lock Up Torque converter for improved torque and efficiency on grades. Spring-applied hydraulically released (SAHR) brakes provide simplified operation of the parking brake. Improved Operating Efficiency A completely reengineered hydraulic infrastructure for the operator station features seat-mounted controls to deliver a

user codes can be stored in the models for operating security and quick pattern changes.

The powertrains for both models are anchored by the Cat C4.4 ACERT engine that meets stringent Tier IV Final emissions standards using a service-free SCR solution for improved operating efficiency.

more comfortable operating position, reducing operator fatigue over extended shifts. Electronic sensors imbedded in the design automatically detect the seat position. The controls stay with the operator regardless of forward or reverse operation and eliminate the pilot control pods for backhoe operation, significantly increasing legroom at the rear of the cab. Control design allows the operator to sit at 45-degrees to the rear of the cab for increased operating comfort when truck loading and ditch clearing. The backhoe loaders’ redesigned digital display center with soft keys affords fast and efficient setting of critical machine functions plus offers clearer visibility of the fuel and water temperature gauges and tachometer. Full text diagnostic descriptions and instruction pop-ups aid in efficient machine operation and trouble-shooting. Up to 25 different

Improved Load Control Both the 440 and 450 backhoe loaders are built with common single-tilt loader arms. Electrical sensors positioned at the tilt and lift arm enable parallel arm movement for increased material retention when lifting the loader bucket and safe handling of palletized loads. In-cab easy-to-set programmable kickout allows the operator to quickly establish upper and lower arm positioning for repetitive work like loading trucks. Additionally, return-to-dig limits can be set for efficient loader material excavation. The 440 and 450 models can be ordered from the factory or easily field-retrofitted with the optional loader quick coupler that delivers quick work tool changes and increased machine versatility using the Cat Integrated Tool Carrier (IT) system. Twist-to-connect quick disconnects for both the loader and backhoe arm attachments deliver fast connectivity under pressure. These backhoe loaders feature adjustable auxiliary hydraulic flow to the work tool to efficiently operate powered attachments. The 440 and 450 backhoe loaders come standard with Product Link systems that transmit critical machine operating data via VisionLink back to the office. Key company personnel can be notified of machine fault codes, service reminders, fuel levels, and machine utilization, hours and location to improve fleet management. For more information on Cat backhoe loaders, visit cat.com. 

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 2, 2020 • Page 51

WORLD’S SMALLEST BACKHOE NOW WITH TRACKS – JCB-1CXT

Max Dig Depth: 10 ft 1 in / Gross Engine Power 49 HP / Loader Bucket Breakout: 1,466 lb JCB 1 CXT, a TRACKED BACKHOE is a versatile machine, offering skid-steer and mini excavator performance in one package. The 1CXT provides superior maneuverability, an optional handheld tool auxiliary, as well as a universal quick hitch that is compatible with most of your skid steer attachments. Standard full cab with integrated heating & air-conditioning. Due to its compact size and under 10,000 lbs weight, the 1 CXT is easy to tow in a trailer without a CDL (where local regulations allow). NO DPF / DEF AFTERTREATMENT. Operators environment friendly with easy to use controls and all daily checks and greasing can be carried out at ground level on a JCB backhoe. To learn more about JCB 1CXT, visit www.jcb.com/en-us/products/backhoe-loaders/1cxt

935 E South Loop Stephenville, TX 76401 254-965-6783 877-207-8782 1841 N US Hwy 286 Decatur, TX 76234 940-965-6783 www.hendershotjcb.com

461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON 1585 E. 69th Avenue Denver, CO 80229 1-844-JCB-IRON www.ProConJCB.com

2935 Lincoln Road Las Vegas, NV 89115 702-432-2200 www.swjcb.com

/ /JCBNA

2240 W. Buckeye Road Phoenix, AZ 85009 602-761-2525 www.flaskajcb.com

@JCBNA

w w.jcb.com .jcb.com JCBNA www

1315 Vinci Avenue Sacramento, CA 95838 916-880-5776 www.meridianutility equipmentsales.com/jcb

Cisco Equipment 620 N. Bell Street San Angelo, TX 76903 800-496-0271 www.cisco-equipment.com

Terms & Conditions: Pictures shown with optional accessories. For towing policy please consult with your local state transportation office. Offers may change without notice and may not be combined. Additional terms and conditions may apply, please contact your local JCB dealer for details. JCB dealer reserves the right to withdraw, alter or decline any product from sale or any offer without prior notice. Price, if shown, does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected.

Page 52 • August 2, 2020 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

Looking Back

Backhoes

Badger Machine Bulletin 200 DTM-055 Rev — HCEA photo

The Badger 200-DTM was an early example of a truck-mounted hydraulic backhoe — 1956.

Bay City Bulletin 30-I — HCEA photo

Bay City 30 ½-yd. backhoe — 1955

Lima Bulletin No. 82-J 19570601 — HCEA photo

B-E Bulletin No. 10-B-9 12TQ4MQ9-DJ — HCEA photo

Bucyrus-Erie’s smallest cable backhoe was the 3/8-yd. 10-B — 1949.

Schield Bantam Form C-100 — HCEA photo

The Schield Bantam C-350 was descended from a cable excavator built for mounting on World War II surplus trucks and halftracks — 1954.

Lima Type 802 Pull-shovel — 1956

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 2, 2020 • Page 53

NPK Welcomes

NEW DEALER Oregon & Washington: Triad Machinery

Page 54 • August 2, 2020 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

Case Unveils ‘Project Zeus’ 580 EV Fully Electric Backhoe Case Construction Equipment’s “Project Zeus” — the 580 reducing noise in public workspaces and finding new ways hallmark features that contractors expect from Case backhoe EV (Electric Vehicle) — is a fully electric backhoe loader. to work within budgets. loaders. It retains the precision and efficiency of diesel-powThe power and performance of the 580 EV is equivalent Contractors who bid work in states where even greater ered Case backhoes with features such as ProControl, which to other diesel-powered backhoes in the Case product line regulations are in place — such as New York, California and allows for extremely precise boom movement and placement, and provides considerably lower daily operating costs while Florida — also may benefit from deploying electric back- as well as Comfort Steer, which improves steering while also producing zero emissions, according to the manufactur- hoes in their fleet. working in tight quarters or in truck loading operations. er. Many contractors in these sectors either road or trailer The machine’s cab is spacious with large windows that proCity governments and municipalities will benefit from the these machines back to a central shop or yard at the end of vide excellent sightlines to all sides of the machine. It also feaelimination of emissions for working in urban environments the day, making it easy to plug into existing electrical infra- tures the new and enhanced joystick controls found in the and close to other buildings/people, as well as the reduced structure, or to develop charging stations in a controlled yard. most recent generation of Case N Series backhoes, as well as noise generated by the equipment. Utilities who operate their own backhoe fleets can power in-cab amenities such as premium seat options and Bluetooth Two units have already been sold to utilities in the United each machine off of the electricity they generate, essentially radio. States — NYSEG and RG&E, AVANGRID companies and operating the machine at cost. All of this is achieved with a machine that significantly National Grid. improves the working environment for the operator and Case has the capability to produce additional units laborers alike, as it runs with zero emissions, and signifthroughout 2020 before ramping up production to meet icantly lowers sound levels on the job site for improved greater demand in following years. communication between the operator and staff on the “Case built the very first factory-integrated backhoe ground. loader in 1957 and has been at the forefront of backhoe “The 580 EV performs like a Case backhoe — innovation,” said Leandro Lecheta, head of construcmatching the power and performance expected from tion equipment — North America, CNH Industrial. Case with the advantages of an electrified machine,” “The 580 EV is a significant step forward in our said Zieser. commitment to sustainability, the evolution of earth“Operators will experience the same digging, lifting moving equipment and truly practical innovation that and craning performance achieved in a diesel-powered drives real savings and competitive advantages for machine in a quieter, emissions-free work area. That’s backhoe owners.” the ultimate goal of our sustainability efforts — improve “The backhoe loader is perfectly suited for electrifithe world around us, make equipment more sustainable, cation as the varied use cycles, from heavy to light and to do so while finding new ways to improve producwork, provide an excellent opportunity to convert wast- The 580 EV is powered by a 480-volt, 90-kilowatt-hour lithium-ion tivity and the experience of the people who use the ed diesel engine hours into zero consumption battery battery pack that can be charged by any 220-volt/three-phase equipment.” time — yet provide the operator with instantaneous connection. While applications will vary, each charge will suptorque response when needed,” said Eric Zieser, direc- port most common eight-hour workdays. Adding Power, Ease to Ride tor — global compact equipment product line, Case. Case has partnered with Michelin on tires for two of its “At low idle a diesel engine has reduced torque and Sustainable for Budgets, Environment alternative-powered equipment solutions — the methanerequires time for the engine to ramp up to meet the load The 580 EV operates with zero emissions — lowering the powered ProjectTETRA wheel loader, and now the 580 EV demands. Electric motors, on the other hand, have instanta- total carbon footprint for its owners. These are important backhoe loader. neous torque and peak torque available at every operating environmental considerations, but the new backhoe also “The MICHELIN CrossGrip tires are great for general use speed.” helps improve fiscal sustainability. with construction equipment, and offer great handling and The 580 EV is the second major alternative-powered • While every application will be different based on its reduced rolling resistance,” said Zieser. “Whether under full machine introduced by Case — the manufacturer rolled out workload, it is estimated that the 580 EV could save fleets as load or roading to a job site, these tires will provide the optithe FPT Industrial methane-powered concept wheel loader much as 90 percent in annual vehicle service and mainte- mal match of power and efficiency for an electric vehicle.” ProjectTETRA at bauma 2019. Electrification was per- nance costs when taking into account the reduction/eliminaThe new MICHELIN CrossGrip is a multi-purpose radial formed in conjunction with Green Machine Equipment Inc. tion of diesel, engine oil, diesel exhaust fluid, regular preven- tire designed for use on the road, grass and snow. Using a speand Moog Inc., and with direct input from utilities and other tive maintenance and long-term engine upkeep/maintenance cial rubber compound, this four-season tire is designed for businesses focused on converting significant portions of (and the associated labor rates and time savings). high-load-capacity use on loaders, backhoes, telehandlers and their fleets to fully electric backhoes. • Some utilities and contractors are incentivized to deploy tractors. The tire has a non-directional tread for handling in Case also partnered with Michelin to outfit the first-of-its- electric equipment and vehicles in their fleets, providing both forward and reverse gears. kind machine with specialized MICHELIN CrossGrip tires even greater financial benefit and further lowering the total With 196 tread blocks per wheel rotation, the tire achieves for even greater efficiency and handling. cost of ownership. driver comfort by reducing vibration. Asymmetrical lateral • Operating electric construction equipment may make blocks help to provide traction in winter conditions when Electrification Ideal for Utilities, Urban contractors eligible for work they may have otherwise been short starting and stopping distances are imperative for safety. Environments unable to bid on, expanding their business opportunities and Reinforced for excellent puncture resistance, CrossGrip is The 580 EV is powered by a 480-volt, 90-kilowatt-hour allowing them to win more work each year. designed to offer increased productivity and can be studded lithium-ion battery pack that can be charged by any 220• While the 580 EV will be sold at a higher initial price for ice usage. volt/three-phase connection. While applications will vary, than diesel-powered backhoe loaders, it is estimated that The Future of Electric each charge will support most common eight-hour work- average fleets will see a payback on that premium in roughly The 580 EV is the first formal entry into the electric equipdays. five years. All savings achieved after that will go to improve ment market for Case. The manufacturer, in partnership with The battery separately powers the drivetrain and hydraulic the bottom line and continue to lower the operation’s carbon FPT Industrial, continues to explore additional solutions in motors, resulting in hydraulic breakout forces equal to footprint. electrification, alternative fuels and alternative propulsion sysdiesel-powered machines and improved performance during Each 580 EV comes standard with Case SiteWatch telem- tems for equipment across all product lines and industries that simultaneous loader and drivetrain operation, according to atics for additional monitoring and management of machine help achieve sustainability for all in the construction industry the manufacturer. performance and utilization. without sacrificing power and performance. These solutions Utilities, utility contractors, as well as government and will be introduced and brought to market as industry demand public works operations, are well suited for the 580 EV as Improved Operating Environment requires. they generally have initiatives aimed at lowering emissions, While the new 580 EV is electrified, it retains many of the For more information, visit CaseCE.com/580EV 

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 2, 2020 • Page 55

Page 56 • August 2, 2020 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

CHART from page 46

Model

Loader SAE HP (kw)

CATERPILLAR

Loader Life Capacity lbs. (kg)

415

70 (52)

6,730 (3,053)

416

86 (64)

6,730 (3,053)

420

92 (68)

7,230 (3,280)

415F2

68 (51)

416F2

420F2

420F2 IT 430

12 (3.7) - 13.9 (4.2)

14.2 (4.3)

12,281 (5,571)

11.9 (3.6) - 13.6 (4.1)

6,751 (3062)

12,281 (5,571)

11.9 (3.6) - 13.6 (4.1)

92 (68)

7,230 (3,280)

12,643 (5734)

12 (3.7) - 13.9 (4.2)

14.2 (4.3)

93 (69)

7,601 (3,448)

11,575 (5,250)

11.9 (3.6) - 13.7 (4.2)

14.3 (4.4)

8,193 (3,716)

11,318 (5,133)

93 (69)

7,601 (3,448)

107 (80)

7,230 (3,280)

104 (76)

8,782 (3,983)

430F2

108 (81)

450

131 (98)

440

12207 (5,537)

Backhoe Max Loading Height Digging Depth ft. (m) ft. (m)

6,751 (3062)

87 (65)

420 XE

Loader Breakout Force lbs. (kg)

8,886 (4,031)

12207 (5,537)

12,643 (5734)

12 (3.7) - 13.9 (4.2)

11,283 (5,118)

11.9 (3.6) - 13.7 (4.2)

12,643 (5734)

13 (3.9) - 15.1 (4.6)

13,560 (6,151)

13.0 (4) - 14.8 (4.5)

13.5 (4.1) - 15.4 (4.7) 14.9 (4.5) - 17.3 (5.3)

14.3 (4.4)

14.2 (4.3)

Travel Speed 4th Gear Fwd MPH (kmh) 23 (37)

Operating Weight lbs. (kg)

15,426 (6,997) - 24,251 (11,000)

23 (37)

15,207 (6,898) - 24,251 (11,000)

23 (36)

15,207 (6,898) - 24,251 (11,000)

25 (40)

16,279 (7384) - 24,251 (11,000)

25 (40)

15,591 (7072) - 24,251 (11,000)

14.2 (4.3)

25 (40)

14.3 (4.4)

25 (40)

17,033 (7,726) - 24,251 (11,000)

15.5 (4.7)

26 (41)

16,590 (7625) - 24,251 (11,000)

25 (40)

15.7 (4.8)

25 (40)

17.0 (5.2)

25 (40)

15.5 (4.7)

24 (39)

16,279 (7384) - 24,251 (11,000)

17,732 (8,043) - 24,251 (11,000) 18,364 (8,330) - 24,251 (11,000)

21,544 (9,772) - 29,321 (13,300)

24,039 (10,904) - 29,321 (13,300)

VISIT WWW.CONSTRUCTIONEQUIPMENTGUIDE.COM FOR COMPLETE BACKHOE LOADER LISTINGS.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 57

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): CATERPILLAR 988A WHEEL LOADER. I SEEK TO PURCHASE A CAT 988A THAT IS IN WORKING ORDER, WITH GOOD TIRES AND A BUCKET WITH TEETH. EMAIL JIMTHORNTON@STNY.RR.COM OR CALL 607-483-2383. –––––––––––––––––––––––––––––––– WANTED (PA): FORD F250 SUPER DUTY PICKUP TRUCK, WITH 6.4 DIESEL, ANY CONDITION. EMAIL HARLOWCONTRACTING@YAHOO.COM OR CALL 267-738-5984. –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS OF CATERPILLAR CRAWLER LOADERS OR ANY USED CONSTRUCTION EQUIPMENT WITH WHOLE SALE PRICE. EMAIL AMERICAUSEDEQUIPMENT@ GMAIL.COM OR CALL 657-236-7504. –––––––––––––––––––––––––––––––– WANTED (PA); GARWOOD 75B CRANE, ANY CONDITION OR ANY ATTACHMENTS. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): KOEHRING 1066 EXCAVATOR, ANY CONDITION. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE 860 SCRAPER TRANSMISSION, ANY CONDITION. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): AKERMAN MOTOR GRADERS, ALL MODELS. PLEASE LET US KNOW IF YOU HAVE ANY MACHINE LIKE THIS (WORKING OR NON). EMAIL: HIEEQUIPMENT@GMAIL.COM; PHONE: 775-235-8837 –––––––––––––––––––––––––––––––– WANTED: 3-AXLE, HEAVY DUTY LOW BOY TRAILER FOR HAULING A CAT 963. EMAIL: BENHOOVER@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CT): CASE 1455B CRAWLER LOADER. EMAIL: HENRYINDUSTRIES@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (IL): NEED MANUALS AND PARTS FOR 1970 BARBER-GREENE TF-30 DRAINAGE TRENCHER (TILING MACHINE). EMAIL: JL.FOMAC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): BATTERY BOX FOR A KOMATSU PC170LC-11. EMAIL: MROBERSON@ LYLEMACHINERY.COM PHONE: 601-624-1124 –––––––––––––––––––––––––––––––– WANTED (FL): MORBARK 4600XL GRINDER. EMAIL: RKCLANDDEVELOPMENT@ATT.NET ––––––––––––––––––––––––––––––––

WANTED (FL): TRANSMISSION FOR EARLY '90S VINTAGE P&H CENTURY RT50. EXISTING IS A SHINKO RCM2509B S/N 0005. PARTS OR SUBSTITUTE TRANNY OR ENGINE/TRANS CONSIDERED. EMAIL: MIKE.SMITH@ CERTIFIEDBOOMREPAIR.COM PHONE: 813-247-1963 –––––––––––––––––––––––––––––––– WANTED (CA): BOBCAT T550 COMPACT TRACK LOADER. EMAIL: CINDYLARK4@MSN.COM –––––––––––––––––––––––––––––––– WANTED (PA): REXWORKS INC MAXIGRIND 425 GRINDER. EMAIL: HENRYINDUSTRIES@YAHOO.COM; PHONE: 814-371-8010 –––––––––––––––––––––––––––––––– WANTED (PA): FORD F700 HOOK LIFT TRUCKS - WORM GEAR AND SHAFT ASSEMBLY FOR COMPACT MODEL H-L SIDE-O-MATIC BOOM UNLOADER COMPACT 2 7-63-5C DICO CONTINUOUS SERIES. EMAIL: INFO@LESNEYCONCRETE.COM PHONE: (724) 224-8703 –––––––––––––––––––––––––––––––– WANTED (USA): HYUNDAI ATTACHMENTS - LOOKING FOR A GOOD USED GP BUCKET 4-6 CU.YD. FOR A 1996 HYUNDAI HL770 LOADER. EMAIL: DONNIE@RADIATIONCLEANTECH.COM; PHONE: 601-319-9453 –––––––––––––––––––––––––––––––– WANTED (NY): BANDIT 65 WOOD CHIPPER - USED BRUSH BANDIT 65XP, 75XP, 2002 OR NEWER, 35HP MINIMUM. EMAIL: DSPTECH11@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX400LC-1 EXCAVATOR EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR 1000LB FRONT COUNTERWEIGHT FOR CASE 455C CRAWLER LOADER. EMAIL: ROGERPF1@FRONTIERNET.NET; PHONE: 570-639-3058 –––––––––––––––––––––––––––––––– WANTED (US): CAT 311, 312, 315, 320, 325, 330, 336 CL,DL,EL EXCAVATORS UNDER 8000 HOURS. EMAIL: REBUILD@TUSCO.NET; PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: AMPHIBIOUS EXCAVATORS, ALL MAKES AND MODELS, NEW OR USED + ALL MAKE AND MODEL BOOMS AND STICKS LONGER THAN NORMAL + ALL MAKE AND MODEL BROKEN BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US); LOOKING FOR PILOT VALVE 9137384 FOR HITACHI 200LC-3 EXCAVATOR. EMAIL: PJUREKX1@GMAIL.COM; PHONE: 585-492-2449 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR OFFHIGHWAY TRUCKS - I NEED #5 CAT 775D &E ROCK BEDS ONLY. ONLY NEED BEDS. EMAIL: WEBBPAGE1@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS WANTED - SCHWING, PUTZMEISTER, ALLIANCE, CIFA, ETC. ALL MODELS, BRANDS, SIZES. OLD OR NEW! BOOM PUMPS,TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD RETIRED, NO LONGER USED & PARTS PUMPS ALSO PURCHASED. EMAIL INFORMATION A.S.A.P. INSTANT PAYMENT GUARANTEED !! FINDERS FEES PAID!!! EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (PA): I’M LOOKING FOR A PUSH THERMOPLASTIC MACHINE. CAN BE ANY BRAND. EMAIL: HELLOELISA@ICLOUD.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 330-336 DL SERIES EXCAVATORS EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (RI): CATERPILLAR 4+ MISCELLANEOUS EQUIPMENT. I AM HELPING A FRIEND TO FIND A PART FOR HIS CAT MODEL 426, SERIAL #7BC02647, PART #9R383. IT WOULD BE REALLY HELPFUL IF THIS PART WAS AVAILABLE IN EASTERN USA, ESPECIALLY IN THE NORTHEASTERN STATES, AND AVAILABILITY, PRICE, AND SHIPPING ARE IMPORTANT IF THE PART IS AVAILABLE ELSEWHERE. THANK YOU FOR YOUR HELP. EMAIL: JOETTAKIRK@AOL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR D8R CRAWLER DOZER. LOOKING FOR ORIGINAL 2018 D8R CATERPILLAR BULLDOZER. EMAIL: ARABHURUR@GMAIL.COM; PHONE: +251-911513133 –––––––––––––––––––––––––––––––– WANTED (SC): ALL MODELS BRADCO TRENCHING / BORING / CABLE PLOWS; LOOKING FOR 3 PT HITCH 3 OR 4 FOOT TRENCHER 6" WIDE FOR REAR KUBOTA EMAIL: PEPPERJACKPM@YAHOO.COM; PHONE: 803-460-2600 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR EXCAVATORS. LOOKING FOR USED AMPHIBIOUS EXCAVATORS, MARSH BUGGIES AND MARSH MASTERS - ANY BRAND. ALSO LOOKING FOR BROKEN/DAMAGED LR BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): INGERSOLL RAND AIR COMPRESSOR, MODEL 125 CFM. NEED EXHAUST/INTAKE MANIFOLD FOR A CONTINENTAL G193A GAS ENGINE WHICH IS IN THE I/R GYRO FLOW 125 COMPRESSOR. EMAIL: HFINCHTTD@FONTIERNET.NET ––––––––––––––––––––––––––––––––

WANTED (VA): FORD 1920 758B BACKHOE ATTACHMENT. EMAIL: CONWELL1208@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): USED HITACHI EXCAVATORS EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92-332-248-9350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): 1-FINAL DRIVE & CONTROL VALVE ASSEMBLY, 2-ENGINE WIRING HARNESSES, HOODS, DISPLAY MODULES & ECU'S SN #FGY0381 FOR SAMSUNG SE240 LC-3 EXCAVATOR. EMAIL: TVHCSHOP@GMAIL.COM; PHONE: 920-735-1221 –––––––––––––––––––––––––––––––– WANTED (KS): CAT 922B INJECTION FUEL LINE. I NEED ALL 4 FOR MY 1960'S DIESEL FRONT-END LOADER. EMAIL: BLACKNIGHT64R@ATT.NET –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADER 950B, 950E, 966E, 966F, 966FII. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS EX200, EX270LC, EX400, EX400LC. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM. –––––––––––––––––––––––––––––––– WANTED: LINCOLN WELDERS, MODELS 250/300/225. I'D LIKE TO BUY USED MACHINES LOW HOURS. EMAIL: JONATHANDAYTON4@GMAIL.COM; PHONE: 806-292-7452 –––––––––––––––––––––––––––––––– WANTED (CA): JOHN DEERE 330 EXCAVATOR. EMAIL: JIMWLAMBERT@HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (NM): BARBER GREENE BG-225B SLAT CONVEYOR, COMPLETE LEFT SIDE. EMAIL: JR_STRIPING@LIVE.COM –––––––––––––––––––––––––––––––– WANTED (US): LOOKING FOR CME 45 WITH DEUTZ DIESEL DECK ENGINE AND AUTOMATIC HAMMER. ANY CONDITION. EMAIL: GEONETICS@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (IL): HAULOTTE AERIAL LIFT, ALL MODELS. LOOKING FOR A TOWABLE BOOM LIFT. EMAIL: SAWMANDAN@SBCGLOBAL.NET PHONE: 630-553-7612 –––––––––––––––––––––––––––––––– WANTED (MI): ALL MODEL KUBOTA WHEEL LOADERS. EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: 616-813-3642 –––––––––––––––––––––––––––––––– WANTED (NV): CATERPILLAR 14G MOTOR GRADER. EMAIL: SALES1@HIEEQUIPMENT.COM PHONE: 7025295171 –––––––––––––––––––––––––––––––– WANTED (USA): LOOKIN FOR A GOOD USED KOMATSU PC 400-5 EXCAVATOR EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 ––––––––––––––––––––––––––––––––

WANTED (USA): TAKEUCHI TB0-35 AND 135 WITH CABS. RUNNING OR FOR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR COMPACT TRACK LOADERS, USED CATERPILLAR SKID STEER LOADERS 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XE. EMAIL: LSGLOBAL@NVER.COM –––––––––––––––––––––––––––––––– WANTED (USA): A GOOD USED C-12 CAT ENGINE FOR A SHORT NOSE 2000 PETERBILT 379 ROAD TRACTOR. ENGINE TO HAVE CORRECT ECM AND S# BEGINS WITH 2KS , 380 MIN. HP. CONTACT JIM ARNETT JARNETTJR@ORBITSDO.COM; CELL# 937-603-3965. –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR D11 CRAWLER DOZERS - INTERESTED IN PARTS FOR LARGE DOZERS FOR COAL MINES AND AGGREGATE QUARRIES. EMAIL: BIGIRONLUNS87@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 315,320,325,330,336 DL SERIES EXCAVATORS UNDER 8000 HOURS AND WHOLESALE PRICED MACHINES. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: TAKEUCHI MINI EXCAVATORS TBO-35’S WITH CABS, RUNNING MACHINES AND/OR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (NY): LOOKING FOR USED 5 TON WIRE ROPE HOIST TO RUN ON A PATENT TRACK EMAIL: INFO@ BRIDGEHAMPTONSTEEL.COM PHONE: 631-537-2486 –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR 330C L EXCAVATOR - LOOKING TO BUY CATERPILLAR 330CL & 330DL IN GOOD RUNNING CONDITION. EMAIL: RIZ@MEGAEQUIPMENTS.COM PHONE: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS TRENCOR TRENCHING / BORING / CABLE PLOWS. EMAIL:ADMIN@MITCHELLHOPPER.COM PHONE: 432-888-2593 –––––––––––––––––––––––––––––––– WANTED (FL): BOBCAT MT50 COMPACT TRACK LOADERS EMAIL: EIDNKSLJK@ICLOUD.COM PHONE: 6039 2I28 939 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS CATERPILLAR WHEEL LOADERS. LOOKING TO BUY ANY CAT LOADER AT WHOLESALE PRICE. EMAIL: MARKETING@ GCESEQUIPMENT.COM PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (TX): ALL MODELS CATERPILLAR MOTOR GRADERS. EMAIL: MAGDIELLERMA@GMAIL.COM PHONE: 956-432-7379 ––––––––––––––––––––––––––––––––

WANTED (USA): ALL MODELS CATERPILLAR WHEEL LOADERS. CAT 966H OR K WITH UNDER 10,000 HOURS, BUCKET, COUPLER. SET OF FORKS IS A PLUS. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (WV): ALL MODELS TERRAMITE BACKHOE LOADERS - CHECKING PRICES FOR TERRAMITE T7 FRON RIM FOR SERIAL NUMBER 227X0102. EMAIL: EDWINANDDIANA@FRONTIER.COM –––––––––––––––––––––––––––––––– WANTED (FL): CASE CRAWLER DOZERS, ALL MODELS. EMAIL: JABOWEND@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOBELCO K907D EXCAVATORS - MAIN HYDRAULIC CONTROL VALVE (907D) SERIAL #LN7001 TO YG0501. KOBELCO PART # 2436U1165F2, KAWASAKI TAG # KMX15A/23009 ALSO USED ON YUTANI 1986, MODEL 195. EMAIL: PTSCOTT@HTVA.NET –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU ATTACHMENTS - SKELETON BUCKET FOR KOMATSU 220 EXCAVATOR 54" TO 60". CAN ADAPT FROM OTHER MACHINES AS LONG AS ITS 80 MM PINS. EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 –––––––––––––––––––––––––––––––– WANTED (USA): HYDRA-MAC 1700 SKID STEER LOADER. EMAIL: MALONEYFARM.1@ WINDSTREAM.NET –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR EXCAVATORS, ALL MODELS. EMAIL: PAUL@HEAVYSURPLUS.COM; PHONE: 214-625-2652 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D5B OR D6C CRAWLER DOZER. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 970F WHEEL LOADER. EMAIL: SALES3@GCESEQUIPMENT.COM; PHONE: 657-347-6605 –––––––––––––––––––––––––––––––– WANTED (GA): KOBELCO EXCAVATORS, ALL MODELS. MINI- OR MIDIEXCAVATOR. USED. UNDER 2000HRS. CA 35 T0 40 HP FULLY FUNCTIONAL. THUMB EMAIL: JKSAPP@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (US): LIMA CRANE – ANY LIMA 2400B MACHINES IN ANY TYPE OF CONDITION. EMAIL: REBUILD@TUSCO.NET ––––––––––––––––––––––––––––––––

Page 58 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

• Atlanta, GA September 9, 2020

• New Castle, PA Fri., August 7, 2020 For: 2 Job Completions. Construction Equipment & more

• Northeast Regional Event September 16 - 17, 2020

• ONLINE ONLY Fri., August 7, 2020 For: Late Model Construction Equipment (Queretaro, Mexico) • Buffalo, NY Sat., August 8, 2020 For: Construction, Agriculture, Aggregate Equipment & more

• Chehalis, WA September 11, 2020

BIG IRON www.bigiron.com 800-937-3558

• Midwest Regional Event September 22-23, 2020

• ONLINE ONLY August 5, 2020

A. CURTIS ANDREW AUCTION, INC. www.acurtisandrewauction.co m 410-754-8826 • Chestertown, MD Sat., August 15, 2020 For: Unruh Excavating, Inc. Public Auction

• Dallas, TX Tues., August 11, 2020 For: Late Model Rental Fleet Construction Equipment & more

ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061

• West Milford, NJ Sat., August 15, 2020 For: Winter Job Completion • Albany, NY Sat., August 22, 2020 For: Complete Liquidation, Retirement Auction • Tampa, FL Wed., August 26, 2020 For: Major Job Completion, Very Late Model Construction Equipment RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 All our auctions are now online bidding only! • Denver, CO August 5, 2020 • Tipton, CA August 12, 2020 • Houston, TX August 25 - 26, 2020 • Orlando, FL August 27, 2020 • Phoenix, AZ August 28, 2020 • Kiefer, OK September 2, 2020 • Mountain West Regional Event September 8, 2020

To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• Sacramento, CA September 23, 2020

• Rome, NY Sun., August 9, 2020 For: Estate Auction

• Houston, TX Thurs., August 13, 2020 For: Acquisition. Construction & Agricultural Equipment

Coming Auctions

• ONLINE ONLY Closes August 4, 2020 For: Vehicles & Equipment BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Online/Sacramento, CA Sat., August 8, 2020 For: Monthly Public Auction • Online/Portland, OR Fri., August 28, 2020 For: Monthly Public Auction • Online/Sacramento, CA Sat., September 12, 2020 For: Monthly Public Auction • Online/Woodburn, OR Fri., September 25, 2020 For: Monthly Public Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY August 4, 2020 • ONLINE ONLY August 11, 2020 • ONLINE ONLY August 18, 2020 • ONLINE ONLY August 25, 2020 • ONLINE ONLY September 1, 2020 • ONLINE ONLY September 8, 2020 • ONLINE ONLY September 15, 2020 • ONLINE ONLY September 22, 2020

• ONLINE ONLY August 12, 2020 • ONLINE ONLY August 19, 2020 • ONLINE ONLY August 26, 2020 • ONLINE ONLY September 2, 2020 HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., August 14, 2020 For: Trucks, Trailers & Equipment IRON HORSE AUCTION www.ironhorseauction.com 910-997-2248 • ONLINE ONLY August 20 - 27, 2020 For: Bankruptcy Auction of National Quarry Services, Inc. J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163 • TIMED ONLINE ONLY Wed., August 12, 2020 For: Construction, Utility Equipment and more (Shrewsbury, MA) J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL September 22, 23 & 25, 2020 For: Trucks, Construction, Ag & Forestry Auction JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • ONLINE ONLY July 30 – August 6, 2020 For: Kenmore Heavy Equipment, Contractors Equipment & Vehicles

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE ONLY July 29 - August 4, 2020 For: East Coast Heavy Equipment & Truck Auction • Brooklyn, MS August 7 - 8, 2020 For: Early Fall Construction & Transportation Public Auction • ONLINE ONLY Tues., August 11, 2020 For: Government Asset Auction • ONLINE ONLY August 12 - 18, 2020 For: Absolute Auction Kaolin Mining Equipment & Related items • Pelzer, SC Thurs., September 24, 2020 For: East Coast Construction & Transportation Auction JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Cope, SC Sat., August 15, 2020 For: Lowcountry Heavy Equipment Public Auction McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • ONLINE ONLY Tues., August 4, 2020 For: Virtual Live Farm & Construction Equipment • ONLINE ONLY Tues., August 11, 2020 For: Virtual Live Farm & Construction Equipment • ONLINE ONLY Tues., August 25, 2020 For: Virtual Live Farm & Construction Equipment MOTLEYS INDUSTRIAL www.motleys.com 1-877-MOTLEYS • ONLINE ONLY August 14 - 18, 2020 For: Construction Equipment & Trucks – North Carolina • ONLINE ONLY August 21 - 25, 2020 For: Construction Equipment & Trucks

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Tues., August 4, 2020 For: Government Auction • ONLINE ONLY Wed., August 5, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., August 6, 2020 For: Construction Equipment Auction • ONLINE ONLY Wed., August 12, 2020 For: Ag Equipment Auction • ONLINE ONLY Thurs., August 13, 2020 For: Truck & Trailer Auction • ONLINE ONLY Tues., August 18, 2020 For: Government Auction • ONLINE ONLY Wed., August 19, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., August 20, 2020 For: Construction Equipment Auction • ONLINE ONLY Tues., August 25, 2020 For: Bennett Construction & Benco Machinery Equipment Auction • ONLINE ONLY Wed., August 26, 2020 For: Ag Equipment Auction • ONLINE ONLY Thurs., August 27, 2020 For: Truck & Trailer Auction ROYAL AUCTION GROUP, INC. www.royalauctiongroup.com 239-936-4121 • Fort Meyers, FL August 7 - 8, 2020 For: Heavy Equipment, Industrial Machinery, Trucks & Trailers, Commercial Vehicles & more RTI AUCTIONS www.teitsworth.com 585-243-1563 • ONLINE ONLY August 1 - 4, 2020 For: Empire Farm Days 2020

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • ONLINE ONLY July 30 – Aug. 6, 2020 For: Construction Consignment Auction • ONLINE ONLY August 7 - 12, 2020 For: Timed Online Upper Midwest Locations • ONLINE ONLY August 7 - 17 2020 For: Kibble Equipment Auction • ONLINE ONLY August 12 - 19, 2020 For: Kirchner Wheel Inventory Reduction Auction • ONLINE ONLY August 21 - 26, 2020 For: Timed Online Upper Midwest Locations • Campbell, MN Thurs., August 27, 2020 For: Antique Tractor & Classic Car Auction • Litchfield, MN Thurs., September 3, 2020 For: AgIron Litchfield Event VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Live Virtual Auction Sat., September 26, 2020 For: September 2020 Auction WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Perris, CA Fri., August 7, 2020 For: Public Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., August 8, 2020 For: Live & Online Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Zanesville, OH Thurs., August 20, 2020 For: CCU Coal & Construction LLC • Kissimmee, FL Thurs., September 3, 2020 For: Florida Auction • North Baltimore, OH Thurs., September 24, 2020 For: Ohio Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 59

Buying or Selling? Call any of these professional auction companies

Why Use Iron Bound? That’s easy... It’s SIMPLE and EFFECTIVE! We’ll market and sell your equipment, get top dollar for you and we’ll take the hassle out of the process. A Strategic As sset Managemen nt Full Service e Auction House

THE T TIME IS NOW W

Address: Iron Bound Solutions LLC 750 US HWY 180 Seminole, TX 79360

vantageauctions.c com

Phone: 432-209-5112

951.228.90040

Ritchie Bros.’ Market Trends Provides Truck Tractor Insights Ritchie Bros. is now sharing the insight it has into industry trends via its Market Trends module within its Ritchie Bros. Asset Solutions suite of tools, allowing customers, investors and analysts to better understand the strength of an asset class through indepth analysis of Ritchie Bros. transaction history, including market trends, equipment price performance, asset valuation curves, and mix-adjusted price indexes, according to the company. Each month, Ritchie Bros. publishes a free, downloadable report of pricing trends, broken out by industry. The July report is now available for download. The full Market Trends module is available by paid subscription. “Similar to last month’s report, while prices across the major sectors are lower than a year ago, the rate of decline has continued to moderate through the high-volume June time period,” said Ken Calhoon, vice president, Data Analytics, Ritchie Bros. “Both the U.S. and Canada are showing stability across key equipment categories, and Texas, California and Alberta continue to be the top-three North American markets

Conveniently located for sellers in the Permian Basin, West Texas, the Panhandle & New Mexico.

in terms of buyer participation.” “Used equipment experts, sellers and buyers look to Ritchie Bros. transaction data as the industry gold standard,” continued Calhoon. “We have the full dataset, the understanding and the ability to derive deep insights. Our team of data analysts and data scientists use machine learning and data visualization to create one of the best used equipment data products on the market.” The Market Trends application is an independent part of the suite of services within Ritchie Bros. Asset Solutions (rbassetsolutions.com), which is a complete end-to-end asset management and disposition system. This cloud-based SaaS solution brings together a suite of tools and services to help customers better manage, analyze and sell their assets. From any internet-enabled device, customers are able to access a complete inventory management system, data analytics and dashboards, branded e-commerce sites and multiple external sales channels. For more information about Market Trends, email dataproducts@ritchiebros.com. 

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 15-16 EB Call 866-294-6103

1999 SmithCo 36 Ft Tub, New Paint, Brakes, Wet Kit Pump, Tank, Hoses, Cab Controls ..............$Call 15-16 AP Call Mike 319-470-8388

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

NATION’S LEADING EXTREME SERVICE SPECIAL APPLICATION BUCKETS Hundreds in Stock - Variety Sizes - Many Models Call Emilee 218-863-6444 Email: ai@attachmentsintl.com 15-16 AP

For more information, call Construction Equipment Guide today at

800/523-2200

Page 60 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 61

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. AUGUST 2020 CRANE SAFETY COURSES NEW LOCATIONS! REGISTER TODAY! August 4 – August 7, 2020 Mobile Crane Inspector Training, Cincinnati, OH August 10 – August 14, 2020 Mobile Crane Train The Trainer, Portland, OR August 11 – August 13, 2020 Rigging Inspector Training, Cincinnati, OH August 11 – August 14, 2020 Overhead Crane Inspector Training, Orlando, FL August 17 – August 19, 2020 Qualified Rigger Level 2 Training, Orlando, FL August 17 – August 21, 2020 Mobile Crane Operator Training, Houston, TX August 20 – August 21, 2020 Qualified Signal Person Training, Orlando, FL August 25 – August 26, 2020 Crane Assembly & Disassembly Director Training, Orlando, FL August 25 – August 28, 2020 Overhead Crane Inspector Training, Cincinnati, OH August 25 – August 28, 2020 Overhead Crane Train The Trainer, Houston, TX To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com MINNESOTA ASPHALT PAVEMENT ASSOCIATION (MAPA) 7th Annual MAPA Golf Outing When: Monday, August 10, 2020 Time: 10:30 am - 7:00 pm Where: Bunker Hills Golf Club 12800 Bunker Prairie Rd NW Coon Rapids, Minnesota 55448 Save the date! We are ready FORE summer and a great golf event! Mark your calendar for August 10 and get your foursome together as you won’t want to miss this year. We’re back at Bunker Hills! This will be a great networking opportunity for all participants. We are hoping for another great turnout and beautiful August weather. Proceeds will go to the MAPA Scholarship Fund and Academic Institution Donation Fund. The ticket cost for this event is $150 (Before June 24) and $190 (June 24 and After). Ticket includes lunch, green fee, ½ cart, beer/soda on the course, dinner and prizes. Limited to the first 144 players. Visit www.asphaltisbest.com/events to register online or download the registration form. If you need to switch out a member of your foursome after registering, please contact MAPA Event Coordinator, Grace Gothers at graceg@ewald.com. For more information on the above event, contact MAPA, 1000 Westgate Drive, Suite 252, St. Paul, MN 55114. Phone: 651/636-4666. Email: info@mnapa.org. NATIONAL ASSOCIATION OF WOMEN IN CONSTRUCTION (NAWIC) The Dawn of a New Era: NAWIC 65th Annual Conference VIRTUAL EVENT Dates: August 12 – 14, 2020 Now that we have made the transition to virtual for NAWIC’s 65th Annual Conference (and FIRST ever VIRTUAL conference), we are truly in The Dawn of a New Era! NAWIC Annual Conference aims to create a support network for others like themselves. Women in Construction of Fort Worth was so successful that it gained its national charter in 1955 and became the National Association of Women in Construction. Today, NAWIC provides its members with opportunities for professional development, education, networking, leadership training, public service and more. In addition to keynote speakers, countless seminars and panel discussions, our Industry Council Networking this year provides an opportunity for you to meet and interact with fellow NAWIC members and colleagues in the construction industry during lunch breaks and at designated times through each day of the Virtual Conference. You definitely won't want to miss out on these! The registration fee for this conference is $350 for members and $400 for non-members. Your registration fee this year includes:

• Free Conference T-shirt and Pin! • Registration packet that includes goodies from sponsors and partners! (To be mailed after conference) • Access to all conference materials and recordings for TWO DAYS after the end of conference – in case you can’t catch everything in “real time”! Register today! For more conference details and to purchase tickets for the NAWIC Virtual Conference, visit https://www.nawic.org/nawic/ Annual_Conference.asp ASSOCIATED BUILDERS AND CONTRACTORS (ABC) ABC Convention 2020 Dates: August 17 – 19, 2020 Place: Music City Center 201 Fifth Avenue South, Nashville, TN 37203 ABC members are building Music City, and its the perfect backdrop for ABC Convention 2020. Nashville, a top convention destination known for its honky-tonks, food and arts scene, is also a great place to get inspired by keynote speakers, network with ABC peers and celebrate the accomplishments of merit shop contractors from across the country. Registration for ABC Convention 2020 is open to ABC members, chapter staff and guests sponsored by a member or chapter. If you are a nonmember interested in attending, please email meetings@abc.org for more information. ABC Convention is a closed event. All attendees must be registered and display an event badge to access to any of the ABC Convention events. Advanced registration will close on Monday, August 10. ABC is offering an attractive registration fee that incentivizes attendees to take part in all elements of the August convention. The fee has been reduced to $475. No a-la-carte registration options are available, with the exception of the Excellence in Construction® Awards gala* and the National Craft Championships day pass. If you plan to attend the August Convention and have not yet reached out to us, please email meetings@abc.org to confirm your registration. For more information and to register for this event, please visit http://abcconvention.abc.org..or contact Associated Builders and Contractors, 440 1st St., N.W., Ste., 200, Washington, D.C. 20001. Phone: 202/595-1505 Email: gotquestions@abc.org. ENGINEERING NEWS-RECORD (ENR) Groundbreaking Women in Construction VIRTUAL Conference Dates: August 24 – 27, 2020 NEW DECADE ... NEW DRIVERS ... NEW DECISIONS ENR’s Groundbreaking Women in Construction (GWIC) conference in San Francisco was a success last year with record breaking attendance and enlightened discussion on critical workforce topics. We welcome you be a part of our first ever virtual conference this August 2020! GWIC is much more than just a conference. It is recognized as one of the industry’s premier leadership and talent management events—a catalyst for change to inspire women at all levels to develop their leadership skills, expand their influence and boost industry growth potential. Our varied programming and virtual event platform will allow you and your peers to share, learn, challenge and inspire each other to contribute to your workplace and employer and realize career success! Register today! For more information on the GWIC Virtual Conference, visit https://www.enr.com/groundbreaking-women-in-construction. HISTORICAL CONSTRUCTION EQUIPMENT ASSOCIATION (HCEA) 35th Annual International Convention and Old Equipment Exposition (POSTPONED UNTIL 2021) Dates: August 27 – 29, 2021 Instead of being held this August, it has been rescheduled for August 2021, at the same location near Concordia, Kansas, with the same outstanding attractions. Thank you for your patience and understanding. Be well, and see you at the 2021 Convention! SHEET METAL & AIR CONDITIONING CONTRACTORS’ NATIONAL ASSOCIATION (SMACNA) The SMACNA Edge Conference: A Virtual Education Forum Dates: October 13 – 15, 2020 With member health and safety top of mind, SMACNA has cancelled the 2020 Annual Convention planned for Colorado and is now offering The SMACNA Edge Conference, A Virtual Education Forum, October 13-15, 2020. This new virtual experience will provide amazing content, expert speakers and valuable information on the most relevant and important topics to members. For any questions regarding Convention cancellation, please contact John Franco at jfranco@smacna.org or Kristin De Guzman at kdeguzman@smacna.org. Keep up to date on this event at www.smacna.org/annualconvention.

Events are subject to change, check websites for updates

Page 62 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT....................................................................2 AFE .................................................................................................18 ALEX LYON & SON INC LAS VEGAS NV 9/12/2020 ....................................................61 ASV ...................................................................................................2 AUCTION BLOCK ...........................................................................59 BARGAINS ......................................................................................59 BELL TRUCKS AMERICA INC .......................................................39 BOMAG AMERICAS INC ................................................................29 CALVIN GROUP INC ......................................................................10 CARLSON PAVING PRODUCTS INC............................................28 CATERPILLAR INC. (CATBC) ........................................................49 CEG SCALE MODELS....................................................................38 CONSTRUCTION EQUIPMENT GUIDE..............................55,57,60 DOMINION EQUIPMENT PARTS...................................................20 DOOSAN .......................................................................................6,7 DRESSTA NORTH AMERICA.........................................................35 DYNAPAC...................................................................................32,33 ECCO EQUIPMENT ........................................................................11 FLANGE LOCK................................................................................21 H & L TOOTH CO............................................................................48 HENDRIX MACHINERY LLC ............................................................3 HITACHI EXCAVATOR ....................................................................19 HYDREMA US INC..........................................................................21 HYUNDAI CONSTRUCTION EQUIPMENT ..............................36,37 IEDA...................................................................................................9 IMPACT ROLLER TECHNOLOGY INC..........................................30 IRON BOUND AUCTIONS..............................................................59 JCB INC ...........................................................................................51 JFW EQUIPMENT INC ...................................................................30 JOHN DEERE..................................................................................47 JOHN DEERE SKID STEER...........................................................15 KIRBY-SMITH MACHINERY INC....................................................64 KOMATSU AMERICA CORP .....................................................42,43 LARMEE EQUIPMENT & SUPPLY ................................................18 LEEBOY...........................................................................................24 MAGELLAN CONSTRUCTION.......................................................44 MAULDIN PAVING PRODUCTS.....................................................27 MB AMERICA INC ...........................................................................50

NPK CONSTRUCTION EQUIPMENT INC.....................................53 OKADA AMERICA INC....................................................................56 ROADTEC INC ................................................................................25 SAKAI AMERICA INC......................................................................31 SO CAL SALES AND RENTALS.......................................................5 TAKEUCHI ..................................................................................40,41 TORO...............................................................................................19 TROPHY TRACTOR .......................................................................12 VANTAGE AUCTIONS ....................................................................59 VOLVO COMPACTION ...................................................................28 VOLVO CONSTRUCTION EQUIPMENT-NA .................................63 WACKER NEUSON ........................................................................13 WIRTGEN AMERICA ......................................................................34 YANMAR AMERICA CORP.............................................................17 CALIFORNIA SUPPLEMENT BAR NONE AUCTION.......................................................................1 CALIFORNIA CAT GROUP...............................................................3 D & R WHOLESALE EQUIPMENT SALES......................................7 GARTON TRACTOR INC..................................................................7 JCB CALIFORNIA............................................................................11 MERIDIAN UTILITY EQUIPMENT SALE .........................................5 PIRTEK CALIFORNIA .....................................................................12 SCOTT EQUIPMENT - FONTANA ...................................................2 SO CAL SALES AND RENTALS.......................................................5 TOWMASTER INC. ...........................................................................5 WESTERN RENTALS .......................................................................8 PACIFIC NORTHWEST SUPPLEMENT CASCADE TRADER .........................................................................3 CONSTRUCTION EQUIPMENT GUIDE ..........................................9 LANDMARK EQUIPMENT ................................................................6 MODERN MACHINERY ..................................................................11 OREGON TRACTOR ........................................................................5 ORION EQUIPMENT ......................................................................12 PAPE MACHINERY...........................................................................7 TOWMASTER INC. ...........................................................................6 TRIAD MACHINERY .........................................................................6

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 2, 2020 • Page 63

Contact your local dealer: ARNOLD MACHINERY CO. www.arnoldmachinery.com

Salt Lake City, UT

Sparks, NV

801-972-4000

775-356-1511

Idaho Falls, ID

Las Vegas, NV

208-523-0822

702-642-9000

Meridian, ID

Phoenix, AZ

208-887-6000

602-414-1900

Twin Falls, ID

Tucson, AZ

208-733-1715

520-294-7677

SIERRA MACHINERY, INC. www.sierraelpaso.com

El Paso, TX

Artesia, NM

915-772-0613

575-746-6592

ROMCO EQUIPMENT CO. www.romco.com

Austin

Ft. Worth

Round Rock, TX 512-388-2529 877-851-1026

Ft. Worth, TX 817-626-2288 866-966-4602

Buffalo

Houston

Buffalo, TX 903-322-5602

Houston, TX 713-937-3005 800-865-6998

Carmine Carmine, TX 979-278-3570

Corpus Christi

Longview Longview, TX 903-758-5576

Corpus Christi, TX 361-881-4891

Rio Grande Valley

Dallas

Mercedes, TX 956-565-0100

Carrollton, TX 214-819-4100 800-227-6626

San Antonio San Antonio, TX 210-648-4600 800-966-4601

PACWEST MACHINERY www.PacWestMachinery.com

Spokane Valley, WA 509-534-5933

Portland, OR

Eugene, OR 541-302-3762

Kent, WA 206-762-5933

503-252-5933

VOLVO CONSTRUCTION EQUIPMENT & SERVICES www.vcesvolvo.com

Bakersfield, CA 661-387-6090

Corona, CA 951-277-7620

Fresno, CA 559-834-4420

Sacramento, CA 916-504-2300

Lakeside, CA 619-441-3690

San Leandro, CA 510-357-9131

Turlock, CA 209-410-6710

Page 64 • August 2, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE