Southeast 22, November 1, 2023

Published Nationally

Southeast Edition

® November 1 2023 Vol. XXXV • No. 22

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

$3.00

Inside

North Carolina DOT photos

Carolina Cat Hosts Next Generation Demo Days in Midland, N.C. ...20

SISO Air Holds Demo Event at Thompson Tractor in Ala. ...32

By Chuck MacDonald CEG CORRESPONDENT

Spence Field Hosts 45th Annual Sunbelt Ag Expo in Moultrie, Ga. ...68

Relocating utilities began in 2020 with project planners needing also to relocate some 40 businesses and 17 homes.

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Paving Section . . . . . . . . . . . . . . . . . . . . . . . . . .35-53 Crawler Loaders/Dozers Section . . . . . . . . . . . .55-61 Auction Section . . . . . . . . . . . . . . . . . . . . . . . . .81-85 Business Calendar . . . . . . . . . . . . . . . . . . . . . . . . . .83 Advertisers Index . . . . . . . . . . . . . . . . . . . . . . . . . . .86

U.S. 70 in North Carolina is growing up; it is destined to become Interstate 42 in the next few years. Becoming a grown-up means added responsibility. This is true for roads

just as it is for individuals.

U.S. 70 is already interstate caliber from Dover to New Bern. North Carolina Department of Transportation (NCDOT) has plans for U.S. 70 to become an interstate, carrying traffic to beach areas, military installations and Morehead City. see NCDOT page 38

Lighting It Up On Job Sites Using Illuminating Strategies for Improved Jobsite Safety

By Lucy Perry CEG CORRESPONDENT

Optimal lighting is crucial to a hazard-free and efficient construction site. The right lighting not only keeps workers safe, but it can streamline workflow, which saves on construction cost and time. In planning for the proper lighting of a job site, the best place to start is an assessment of your working conditions to set a baseline. From there you can build a lighting usage and maintenance plan.

You also should consider adding floodlights or task lighting to improve visibility in specific zones, said surveillance system provider Mobile Video see LIGHT page 40

A lighting placement strategy involves time and planning in order to achieve optimal conditions for safety and efficiency.

Page 2 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 3

Exxperience the Prro og grre ess.

BRANCHES MEMPHIS, TN 3930 E. Raines Rd Memphis, TN 38118 800-432-8902 | 901-260-2310

MURFREESBORO, TN 2115 N. Thompson Ln Murfreesboro, TN 37129 877-200-5654 | 629-335-3077

GRAY AY Y, TN 364 Bob Jobe Rd Gray, TN 37615 855-201-7453 | 423-282-5462

COVINGTON, GA 10110 Roberts Way Covington, GA A 30014 844-532-1110 | 770-788-0888

BIRMINGHAM, AL 825 31 31stt St Streett N N. Birmingham, AL 35203 844-344-8658 | 205-323-6108

THEODORE, AL 7651 Theodore Dawes Rd Theodore, AL 36582 844-891-6480 | 251-653-5955

SHREVEPORT T,, LA 5200 Hollywood Ave Shreveport, LA A 71109 800-548-3458 | 318-621-0854

ebherr Wheel Loa aders Lie ® 550 XPo ow wer - L 586 5 XPo ow wer® L5 ower® is the new generation of o Liebherr’s large wheel loaders. Liebherr XPower® is XPo ntegrated, innovative machine e concept that sets new stan ndards in terms of an in abilityy, ability, y performance, performance rro obust de esign and comfort. comfort The XPow wer® powerrr-split split driveline relia com mbines hydrro ostatic with mechanical drive and ensures maxximum efficiencyy,, whatever the application. The Liebherrr--Powerr--Efficiency (LPE) System of o the XPower® wheel load ders adjusts the power to the job for fuel savings of up to 30 3 perrc cent - so you hand dle more, fasterr.

w .heavymachinesinc.com www .

Page 4 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SOUTHEAST EDITION

IN THIS ISSUE

®

Circulated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands

To read these stories and many more, visit www.constructionequipmentguide.com

8

35

34

FEATURES

82

GEORGETOWN COUNTY INTRODUCES APPRENTICESHIP FOR OPERATORS

The department currently has 27 HEO positions. Of those, five are vacant and five are filled by individuals who are beyond retirement age — some in their 70s — and continue to work because they enjoy it.

12

FLORIDA’S NEW EOC WILL BE ABLE TO WITHSTAND CAT 5 HURRICANE

Florida’s Department of Management Services (DMS) broke ground Sept. 20 on a new State Emergency Operations Center (SEOC) in Tallahassee. The $180 million complex will be built on 40 acres of land across from the current facility.

12

EVERGLADES NATIONAL PARK AWARDS CONTRACT TO REBUILD CENTER

South Florida’s Everglades National Park will be getting both a modern replacement and a new name for its visitor center on the state’s Gulf Coast, according to the National Park Service (NPS).

20

CAROLINA CAT HOSTS MORE THAN 500 PROFESSIONALS AT NEXT

Carolina Cat held a Next Generation Demo Days event Oct. 11-13, at a 20-acre quarry in Midland, N.C. The event drew more than 500 customers, including industry professionals, equipment manufacturers and potential buyers.

22

LINDER INDUSTRIAL MACHINERY TO BUY CUMBERLAND TRACTOR

Linder Industrial Machinery expanded its equipment dealership network by purchasing Cumberland Tractor in Fayetteville, N.C. Linder will continue offering Kubota construction and agricultural machines at the Middle River Loop location.

30

TRNSACT SURPASSES $1B IN APPLICATION TRANSACTION REQUESTS

Trnsact Inc. announced it has processed more than $1 billion transaction requests on its Software-as-a-Service platform.The platform enables thousands of equipment dealers to digitize sales, finance and insurance processes.

32

SISO AIR HOLDS DEMO EVENT AT THOMPSON TRACTOR IN ALA.

At 10 locations across three states over a limited timeframe, SISO Air representatives have been holding their “SISO Air Tour-Fall 2023.” The tour recently made a stop Oct. 18, at Thompson Tractor’s facility in Opelika, Ala. Founder Emeritus (1930-2021) Edwin M. McKeon Sr. Southeast Publisher Richard C. McKeon Executive Publisher Teddy McKeon Editor In Chief Craig Mongeau Senior Editor Robby Chakler Editorial Assistant Katherine Petrik Contributing Editor Eric Olson Production Mgr. John Pinkerton Controller Judith Nixon Circulation Mgr. Cathy Printz

Facebook

Twitter

EURO AUCTIONS ACQUIRES MICHENER ALLEN AUCTIONEERING IN CANADA

Liebherr USA Earthmoving and Material Handling Technology held a sales and training seminar for both internal and external distribution network participants to receive extensive product knowledge and hands-on machine time.

Euro Auctions, with onsite and online bidding, under the brands Euro Auctions and Yoder & Frey, announced the acquisition of Michener Allen Auctioneering Limited, a Canadian industrial equipment and automotive auction company.

35

84

FALL WEATHER GREETS GOLFERS FOR GOMACO INVITATIONAL #41

Approximately 320 guests from the United States and Canada were welcomed into the city of Ida Grove for the GOMACO Invitational #41 to enjoy the best of Iowa’s fall weather for two days of golf and camaraderie.

62

66

VOLVO CONSTRUCTION REPORTS STABLE EARNINGS IN Q3 OF 2023

Growth in North America and stable sales in Europe have ensured steady earnings for Volvo CE in Q3, 2023, with signs of a softening towards the end of the quarter.

68

CRAWLER LOADERS, DOZERS SECTION 56

CEG’S 2023 CRAWLER LOADER, DOZERS COMPARISON CHARTS

58

DD130 DOZER PROVIDES VISIBILITY IN FINE-GRADING APPLICATIONS

DEPARTMENTS

SPENCE FIELD HOSTS 45TH ANNUAL SUNBELT AG EXPO IN MOULTRIE, GA.

With more than 1,000 exhibitors and 100,000 visitors, the 45th annual Sunbelt Ag Expo held from Oct. 17-19 at Spence Field in Moultrie, Ga., was a big success.

82

Purple Wave, a leader in the online equipment auction industry, announced a strategic investment and partnership with Copart Inc., a global leader in online auto auctions.

DEALERS GATHER AT IEDA’S MID-YEAR EVENT IN COLORADO

IEDA held its annual mid-year event at the Omni Interlocken Hotel in Broomfield, Colo., on Sept. 5-7. Member dealers were engaged by presentations from leading industry professionals.

PURPLE WAVE PARTNERS WITH ONLINE AUCTION FIRM COPART

LLOYD MEEKINS & SONS CONDUCTS AUCTION FOR DTI

Lloyd Meekins & Sons held a successful one-owner auction for DTI on Oct. 10, 2023, in Apex, N.C. All machines were well maintained and brought higher prices as a result. Bidders attended from 41 U.S. states and six countries.

81 83

COMING AUCTIONS BUSINESS CALENDAR

EQUIPMENT 44 46 52

POWER PAVERS SF-3404 Slipform Paver FAE RPL/EX Road Planer for Excavators BOMAG 100 AD e-5 Electric Tandem Roller

Richard C. McKeon

Kent Hogeboom

Rich Olivier

Patrick Kiel

• North & South Carolina • Tennessee • Virginia

National Sales Manager

• Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida

Key Accounts Manager

Cell e-mail

Web site www.constructionequipmentguide.com Advertising e-mail production@cegltd.com

LinkedIn

84

LIEBHERR HOLDS EARTHMOVING, MATERIAL HANDLING SEMINAR

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910

Mobile

34

YouTube

704/553-8888 704/726-1452 rmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published biweekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2023, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole

Cell e-mail

770/443-3174 404/831-9526 rolivier@cegltd.com

or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

952/353-1770 Cell 612/481-8557 e-mail pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 5

Page 6 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 7

Dobbs is on the job with you. We are you ur source for John n Deere construction eq quipment, parts, and d service Whether you are just service. just begin nning or finishing, we haave the best solution ns for your w needs every steep of the way. Now with approximately 30 3 locations throughout South Carolina, Florida, Georgia, and Alab bama, Dobbs Equipment offers industry leading support and solutions across all customer segm ments.

AL | FL F | GA | SC

(84 4) 4 MYY DOBB S | DOBB SEQUIP MENT. C OM

Page 8 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Georgetown County Introduces Apprenticeship for Operators Shatara Duncan isn’t your typical Georgetown County heavy equipment operator. It’s not just that she’s female. Or that she’s young and petite, looking downright tiny next to the giant yellow off-road articulated dump truck she drives around.

Duncan is unique because she’s the first to enroll in a new county initiative aimed at recruiting and training heavy equipment operators, better known as HEOs. It’s an essential job within the county’s organizational structure, but one that has become increasingly difficult to fill as demand for this skillset grows nationwide.

“These days we are really struggling to find qualified people,” said Ray Funnye, director of Georgetown County Public Services.

The department currently has 27 HEO positions. Of those, five are vacant and five

“We’re looking for people who are good employees,” he said. “If they have that — if they’re reliable, they show up to work and they work hard — we can take care of the rest. We’ll train them and get them on the path to a good career.”

He handpicked Duncan as his first apprentice for those reasons. A Sampit resident, she was working in the scale house and Recycling Convenience Center at the landfill, and Funnye saw potential in her for more. Duncan expressed an interest in learning, and the idea for the apprenticeship program was born. They started the paperwork immediately and she began her training about two months ago.

So far, she’s loving it. She’s learning fast and at just 30

highest paygrade an HEO can achieve is the position of HEO 3, which requires eight years of experience, plus a Class A Commercial Driver’s License (CDL) among other things. Going forward, there will be five levels of HEO after Apprentice. Starting salary for an apprentice is $30,464 with no training or higher education. Applicants for the program must be at least 18 years old.

After one year as an apprentice, employees can qualify to move up to Level 1 HEO and the next

“We’re looking for people who are good employees. If they have that — if they’re reliable, they show up to work and they work hard — we can take care of the rest. We’ll train them and get them on the path to a good career.”

Ray Funnye Georgetown County Public Services

are filled by individuals who are beyond retirement age — some in their 70s — and continue to work because they enjoy it. Two more will reach retirement age within the next 18 months.

“We could be down to 50 percent staffing like that,” Funnye said with a snap of his fingers. “They could decide to walk out any day.”

That’s what led him, with assistance from Human Resources Director Walt Ackerman and the full support of County Council, to create an HEO Apprentice program. It’s similar to a recruit program the county’s Emergency Services Division created last year for firefighters. It trains individuals inhouse and has been successful, having helped the department tremendously in remedying long-term staffing shortages at Georgetown County Fire-EMS and Midway Fire-Rescue.

Funnye hopes for similar results in his department.

years old, could easily advance up the ranks and have a decades-long career, earning a good salary with Georgetown County as a top-tier HEO. “I’m really like a tom boy, so for me this is fun. I like to learn new things and especially the heavy equipment,” Duncan said. Being small of stature, she said she also likes riding high in the trucks. “It’s just fun to me — carrying the dirt, dumping the plastic, being in the compactor, pushing the trash. Being on the hill [at the top of the landfill], you see a lot of birds. You see a lot of things up there.”

She said the variety of tasks makes every day interesting.

As part of the program, the county also will make changes to how HEOs are classified and advance up the ranks. Currently, the

paygrade. They can continue to advance a level each year, as long as they can prove they have mastered the tasks required for that level. For example, for Level 1 an apprentice would have to demonstrate proficiency with at least three pieces of heavy equipment, such as a running loader, excavator, backhoe, motor grader, dump truck, etc. At Level 2, additional pieces of equipment would have to be mastered, and at Level 3, a Class A CDL also would be required. Each level also would bring additional compensation.

“It should simplify the process a lot from what we have and allow people to advance more quickly, as long as the employee can demonstrate they have the mastery to move up,” Ackerman said. “It’s based on time put in and skills. Under our current system, we have people now who have the skills, but can’t move up because our time requirement is so extensive.”

Funnye said he plans to continue recruiting from within when he sees an employee with the work ethic and disposition to make them a good candidate. But individuals, including new high school graduates, are also welcome to apply directly to the program. There are currently five open spots, with more to be added.

If the program is as successful as the Firefighter Recruit School, plans are to expand it into other areas of Public Services, such as construction. The county’s Facilities S e r v i c e s Division, which handles everything from building repairs and some new construction to electrical work and HVAC maintenance and repair, is experiencing similar issues with staffing.

“Seventy percent of people in trade fields — carpenters, bricklayers, electricians — are over 55 years old,” Ackerman said. “That’s nationwide. In 10 years, 70 percent of people in those fields are going to retire and there’s nobody to replace them. We have to start doing something.”

Funnye said he is excited and optimistic about the possibilities apprenticeship programs create for Georgetown County.

“We’re ready to start training the next generation and growing a new crop of trained and skilled professionals,” he said.

“As leaders, we have to work smarter and plan for the worst. That’s what we’re doing here. We’re planning and preparing for the future of Georgetown County.”

For more information about the HEO Apprenticeship Program, send an email to humanresources@gtcounty.org or call 843/545-3074. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 9

Hitachi Excavators E Whether you’re handlin ng a small scale utility project orr moving large volumes of dirt in n a mining operation operation, we have an Hitachi excavator that’s right for the job. Cut maintenance costs with du urable undercarriages and forged d steel parts, move with precisio on because of ments are needed to expedite th he process. efficient hydraulic systtems, and add whatever attachm

cations for Mini to Mining g Excavators Range in Specific Net Power

Operating We Weight

Max Dig D Reach

Max Dig Depth

14.5 – 1,000 HP

3,790 – 429,901 lb

12' 6"" – 50' 4"

7' 2" – 31' 4"

W When you need us, wherre you need us

Call Today to Sche edule a Demo!

Tampa a 813-247-5168

Orlando 407-859-9160

Tallah a hassee 850-574-0892

Fort Myers s 239-334-60663

Equipment • Parts Equipmen Par ts • Service Service

www.gssequipment.net

Ocala 813-247-5168

Jacksonville 904-268-4400

Pompano Beach 9 954-327-8808

Page 10 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 11

Cary, NC: 201 Towerview Court, Cary, NC 27513 Phone: (919) 467-7782 Greensboro, NC: 8642 West Market Street, #122, Greensboro, NC 27409 Phone: (336) 763-2542 Charlotte, NC: 6006 Old Pineville Road, D, Charlotte, NC 28217 Phone: (704) 527-3162 Asheville, NC: 3018 US Hwy 70, Black Mountain, NC 28711 Phone: (828) 686-4433 Virginia, NC: OFFICE COMING SOON! Phone: (757) 840-5368

Email: sales@transitandlevel.com

Web: transitandlevel.com

Page 12 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Florida’s New EOC Will Be Able to Withstand Cat 5 Hurricane Florida’s Department of Management Services (DMS) broke ground Sept. 20 on a new State Emergency Operations Center (SEOC) in Tallahassee. The $180 million complex will be built on 40 acres of scrub land across from the current facility and serve as the designated coordination center for the Governor and all state agencies when responding to a disaster.

The new SEOC will accommodate the state’s Division of Emergency Management staff and partners in a twostory building and include upgraded technology that streamlines processes and allows Division employees to continue day-to-day operations while also actively responding to a disaster, according to a press release from FloridaDisaster.org, the Division’s online site.

“Thanks to the continued support of Gov. Ron DeSantis and the Florida Legislature, I am confident in our ability to build a new, state of the art SEOC that will further the [our] disaster response and recovery capabilities,” said Kevin Guthrie, executive director of the state’s Division of Emergency Management. “The new SEOC will not only accommodate the growing needs of the Division, but also support our pursuit to remain a national leader in the field of emergency management and foster a more prepared and resilient Florida.”

Guthrie added that the construction project will ultimately provide responders with much needed additional space, better technology for a quicker response, and a more secure facility — one built to withstand wind from a Category 5 hurricane.

“We just saw Hurricane Idalia narrowly miss a direct hit on Tallahassee,” he told the Tallahassee Democrat. “We need an SEOC that can withstand winds up to 200 miles per hour, well over a Category 5 wind speed.”

Florida activates its SEOC for natural events like flooding and hurricanes, along with human ones like political conventions and Super Bowls. From the agency’s Tallahassee command center, officials also coordinate law enforcement, transportation and social service responses to fit each event.

With More Storms to Watch, SEOC Needs More Room According to Guthrie, the state has simply outgrown the current operations center. Often there are more than 400 people crammed into space that was designed for 200 when the facility was first built after Hurricane Andrew’s rampage through the state in 1992.

Mark Glass is the director of the Florida Department of Law Enforcement and as a member of the State Emergency Response Team coordinates public safety activities during a declared emergency. He explained to the Democrat that his team put in 24-hour shifts leading up to, during, and after hurricanes Ian last year and Idalia in late August.

“It was often standing room only in there, it can get very loud, and we’re trying to deconflict with everything that’s going around public safety,” he noted. “There weren’t enough outlets for phones, laptops and printers, as well as not enough space at the conference tables when we’re trying to have discussions and talks.”

To alleviate those problems, the new SEOC will include designated spaces for all 20 of the state’s emergency support functions, plus working space for media, future emergency management training and law enforcement, according to FloridaDisaster.org.

Additionally, Florida’s mitigation, preparedness, response and recovery bureaus also will be able to operate

from the new building, which will allow the Division and other support agencies to accommodate enough staff members to respond to a disaster more quickly and effectively.

Florida Legislators Understand SEOC’s Importance Florida Department of Agriculture and Consumer Services Commissioner Wilton Simpson, a former president of the State Legislature, said in a news release that he was happy to see construction get under way on the SEOC after working to get the project funded.

“As Senate President, I was proud to provide $180 million in funding for the new [SEOC], and I am pleased to see the groundbreaking take place so that Florida can continue to lead the nation in emergency management,” he noted.

“The SEOC and those who staff it are critical to Florida’s response to disasters. When activated, the SEOC showcases the very best of Florida and how the hardworking men and women in each emergency support function work together to ensure our state quickly responds and recovers from emergencies.”

State Rep. Jason Shoaf, R-7th District, added, “Having witnessed the EOC’s impressive operation during and after Hurricane Idalia brought devastation to my district, I know how meaningful the new building — and the teams within it — will be to all Floridians facing disasters in the future.”

In speaking with the Tallahassee Democrat, Guthrie said he expects the new facility to be up and running by the end of 2025.

According to a DMS spokesperson, the existing operations center will be reused as additional office space once the new building is completed and staffed. 

Everglades National Park Awards Contract to Rebuild Center South Florida’s Everglades National Park will be getting both a modern replacement and a new name for its visitor center on the state’s Gulf Coast, according to the National Park Service (NPS).

The agency announced Sept. 13 that it had awarded a construction contract for the Marjory Stoneman Douglas Visitor Center project, one of four such facilities that guide visitors into the sprawling 1.5-million-acre wetlands park.

Business Wire reported that Perini Management Services Inc. in Framingham, Mass., a subsidiary of Tutor Perini Corp., a leading civil, building and specialty contractor, had won the bid for the fixed-price project valued at approximately $47 million.

The work will include constructing a new two-story building and making major site improvements at the former Gulf Coast Visitor Center in Everglades City. The location also is where Everglades National Park was dedicated on Dec. 6, 1947.

The new project comes six years after the original visitor center and its surrounding infrastructure were destroyed by Hurricane Irma in September 2017. Since that time, a

temporary contact station has been in place to provide orientation for park visitors. The replacement effort will build resiliency, enhance the visitor experience and improve the park’s ability to maintain the facilities, NPS explained in a news release.

“We are so pleased to announce the award of this contract and get this project moving,” said Pedro Ramos, superintendent of Everglades and Dry Tortugas national parks.

“These improvements will provide a premiere place to showcase the Gulf Coast of Everglades National Park and will ultimately contribute to supporting the local economy of Everglades City.”

New Facility Design to Stand Up to Fierce Storms The NPS noted that the two-story visitor center will be built for resiliency to withstand hurricane-force winds and storm surges. In addition, it will include visitor orientation, retail space, staff offices and an elevated deck with views of nearby Chokoloskee Bay. The elevated building is designed to meet LEED (Leadership in Energy & Environmental Design) Silver

requirements and Florida building codes for coastal high-hazard zones.

This design-bid-build contract also includes a one-story remote concessions and storage building near an improved canoe/kayak launch ramp and the installation of underground utilities, according to Business Wire. Additionally, Perini will demolish portions of the existing bulkhead and provide a new one at the marina and along the waterfront, dredge Chokoloskee Bay and replace existing floating docks with a new floating dock system that will have accessible ramps.

The substantial sitework associated with the new Everglades visitor center will ensure that the roads and parking areas are elevated to reduce flooding from storms and king tides. Enhanced pedestrian walkways, outdoor seating, native landscaping and shoreline stabilization also are part of the plan.

Business Wire noted that Perini recently began preconstruction activities and plans site mobilization in early October.

Substantial completion of the welcome center is anticipated in August 2025, the company said.

The NPS said that while closures at the Gulf Coast location are planned during construction, the park will work to maintain some visitor access when it is safe to do so.

The canoe/kayak launch is expected to remain open continuously until April 1, 2024, when it will close to allow for the building crews to work at the site.

Onsite concession services, including boat tours and rentals, will cease Sept. 30 before resuming in the fall of 2024. Due to the complexity of the project, the NPS noted that all construction and closure dates may vary due to unforeseen circumstances.

The Everglades City visitor center will be named for Marjory Stoneman Douglas, an author and environmental advocate for the establishment of Everglades National Park.

Construction of the new facility was initially authorized by Congress in 1989 as part of the Everglades National Park Protection and Expansion Act. Besides the Gulf Coast facility, the other Everglades visitor centers are Shark Valley in Miami, Royal Palm in Homestead, and the Flamingo facility, located 38 mi. south of the Homestead entrance. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 13

HELLO, O TAL L AHA SSEE! S Let’s get to work.

Ready d to add dd reliable li ble, efficient ffi i t Volv l o machines to your line eup? Now you can at our newest Alta Equipment location serving the greater Tallahassee area.

Get more done at a lo ower cost and build your business the right way.

Learn more about us: 32166 Blue Star Highway | altg.com | 844.462.2594

p meMatters #UpTim

Page 14 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

563-8 872-4 41112 Bellevue (Dubuque), Iowa sales@jjjscheckel.com

, , 85,000 AT D11T - $1,48 2015 CA

$ , AT D10T - $688,000 2007 CA

, AT D10TT - $688,000 2006 CA

2005 CA AT D9T - $488,000 ,

2018 CA CAT D8T - $538,000

2021 CA AT 60015B - $1,550,000 ,

2019 CA AT 390FL - $838,000 ,

Total frame hourrs, 4,242 Idle dl hhours. 2,438 Hours 5,225 Total frrame hours, h 1,556 Neutral N l hours, h ts, 12,040 To p M h ipppper, Machine hine jjust offff jjobb, SU Good used machine just Mid h componen l d , MS ripp jobb, Mid-hour j offff jo g hhours, U BBlade 12,638 Hours, Goodd usedd machi 12,100 Original on documented CAT dealer engine rebuild. Excellent 3,669 Actual woorkingg hours. SU blade w/tilt, Single h k d carriage, a d warranty Blade, Multi-shankk ripper Veryy ggooodd UUnder S blade, Multi shank p , SU i p , Ve d l maintenance and AT dealer CAT Like new trackk ggroups Lik has been on CAT U/C, SU blade, MS ripper ri r.. Documented D history. shank rippperr,, Original O i i l paint, Super clean! i new.

D l servicee history since new.

D l service hhistory since Dealer ripper. Dealer program since new. 652 Hours on remann transmission.

,000 AT D8T - $428,0 2012 CA

2021 CA ATT D6 LGP VP PA AT - $438,000 ,

2019 CA AT D6N LGP - $248,000 ,

ly 2,827 dl , Only g frame hours, 1,843 at idle, 4,670 Original i h i g hours. New SU blade, Paaccar winch, p ating actual oper i Reputation machine. i i l paint, OOriginal

A03322. Next Gen. 2,852 Hours, 3D 3 GGrade d with i h assist, i GPS reeadyy. Machine is as good g d as theyy come.

Straight, clean i i l Dealer D l r ownedd since l & original. i new.

4,120 Total hours, 6 Way W y bl b d , Acc blade A ugr g ade d GPS readyy,, Machine is good g , cle lean and original igi paint.

S d d heavy Standard dut d ty under d carriage. h i

2016 CA AT 390FL ME - $5588,000

, 2017 Komatsu PC800LC-8-$668,000

2018 CA AT 336FL MH - $588,000 ,

A03197. 7,920 Total T l hhours, Hi High gh reputa ep tion machine, 23.7’ Boom, 11.2’Stick, S i k 90 90”” BBucket, Excellent condition from very goood home.

(4)2019 CA ATT 745’s - $$388,,000 Ea. 7 300 hhour range 7,300 g , 3,000 hours h att idle, dl Transmission upda pd te with warranty,y, FFull history available, il bl Clean Cl trucks with origina i al paint.

2009 CA ATT RM500 - $3448,000 ,

3,610 Hours, Reputa p tion i machine hi , UUniv iversall RRotor for bbothh asphalt ph l reclama l tion ti or soilil mixing ii , Water emulsion l i system, Fullll servici e hist hi ory.

visit

i ppkkg, 5,310 Hours, 15’1””Stick, Quick couupler p r,, Aux hydraulics y New J.J. Scheckel Material Handler H Conv C ersion g System, Straigh Si plumbed, 74””6 Yd Yd bucket, To Topcon GPS G Sy g t 2,200 Hours, 54’Total reach, New 30’ Boom, 24’ 24’Stick, andd clean, l Original paint, KKomatsu dealer l inspected. d Hydraulic lifftt cab, Cwt, Bucket or grapple available.

1,970 Total hours, 5 Ye Year ar,, 10,000 y warranty A03178. 3,70000 Frame F h hours, 1,016 0 6 IIdle 0 000 hour h factory f dl hhours, until 2026. Mass Excavvator Arrangemen g t, 11’2” 2,684 Actual w 1’2””Stick, workingg hours. 14’4”” Stick, Quick 24’9””Boom, 11.5 Ya Yard 95””bucket, ” b k 1 Ownerr.. couplerr,, As cleann as they h come from excellent home.

2021 CA AT 980M 9 - $358,000 ,

2020 CA CAT 745 - $548,000

h on CAT 12,042 Total hours, 5,,396 at idle. idl Zero Z hours AT dealer transmission rebuild b & bucket linkages g . Payyload monitorr,, 7.5 yd Bucket, High reputation machine. i

2,921 Total hours, 898 at idle, Tailga il te, Excellent E Bridgestone rubberr,, Full history available, Nice clean truck.

2019 CA AT 730 - $3 $388,000 ,

(5)2020 ) Volvo A45G G’s - $$398,000 , ea. ((2)2015 Volvo A40G’s A - $$298,000 , ea.

2012 CA AT 16M VHP - $488,000 $ ,

2020 CA ATT RM400 - $518,000 ,

(7)CA ) ATT 631G’s - $2888,000-$488,000 , , ((2)2018 ) Volvo A45G & K-TTe Tec 1233 l.

Packkage g of 7 Scrapers p available ail bl ffor fo ren e t or sale S p Pack Scraper kages g - $6488,000 , Ea.

2017 Johnn Deere 9520RX & Deere 2412DE Scraper S p Pkgg $$448,000 ,

A03271. 3,708 hours, 1,268 at Idle, dl 2,440 AActual hours. Good tires, Tailga g te, Origginal g pain p t, Clean machine w/ detailed lifetime if i histoory andd oil samples.

3 Actual 240 Total frame hours h , 106 06 IIdl dle hhours, 134

workking i g hours h sinc i e new. Univ U iversall Rot R or for Asphalt h l RReclama i Soilil Miixing i or Miining i . 415 HP. l tion,

JJScheckel.com

p , 44,000-5,000 000 5 00 Hours, Tailgaates, Fullll suspension, Yearr,, 33,000 Original ppaint, Dealer testeed. 3 Ye 000 hhour extended d d warranty avaiilable. Package price.

These h are ggoodd, clean, p tion i machines hi l , hig hhigh reputa tha h t ha h ve been b well ell main i d. i tained

Avg. 7 500 To Total hours.. Pair of well maintainedd trucks k 16,920 Total hrrs, 6,235 at Idle, Idl 10,685 Work W kingg hrs h .

A g 7,500 from a high g reputa p tionn compan p y. Volvo dealer tested 16’ Moldboard, Ripper pp r,, GPS gr g ade control ready dy. andd inspected, i d Except E tionally ll clean l and ready to go. From high reputaation customer jjust off 14-monthh job. j

55,848 848 Hours on the tr P ly clean l andd well. t uckk, 2 YYeear Volv l o Powertrain i 4,588 Hrs, 24 Ya Yard rd scraper p r,, EExtremely Warranty till 2025. New w tires. Matching pair available. maintained. Dealer testedd & inspectedd w// ffullll hi history.

for detailed photos, videeos, and descriptions!

The fastest grow wing choice for

Large Equipm ment Rental Delivered Nationwide. We are easy to work with & will not be beaat on price and terms!

Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, Scrapers, and much more.

63 872 4112 | email: sales@ @jjscheckel @jjscheckel.com com | www. jjsscheckel.com scheckel com | follow us ffoorr daily updates: WE OWN WHA ATT WE W ADVERTISE! call: 5663-872-4112

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 15

THE SOU S THEAST’S ONE-STOP P SOURCE FOR JOBSITE UTILIT Y EQUIPMENTT,, VOCA AT TIONAL TRUCKS & CR ANES

Ring Power Utility Utility, Tru uck & Crane specializes in everrything from bucket trucks and digger derricks to our vocational line of equipmeent, including grapple loaders, hydroexcavattion trucks and contractor trucks.

We can handle all your lifting and rigging needs withh lattice boom, crawler, truck mounted, rough terrain and industrial cranes.

wer.com | RingPowerC 844.766.REN NT | Utility.RingPow

Page 16 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2019 CATERPILLAR D4K2XL

2019 Caterpillar 950M

2010 Caterpillar 246C HF

2021 Caterpillar 920

$124,000

$224,540

$58,800

HRS $165,000 1,751 ID# UT20582

3,677 HRS ID# UP20364

6,873 HRS ID# UP20659

1,325 HRS ID# UP19198

2015 Caterpillar 336FL

2015 Caterpillar 966M XE

2017 Caterpillar 259D

2010 Caterpillar 246C

$180,250

$257,500

$67,725

HRS $40,170 1,303 ID# UP19198

5,502 HRS ID# UP20465

9,155 HRS ID# UP20623

1,036 HRS ID# UP19959

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 17

CLEVELAND BROTHER RS

USED PAR A TS T

A U d Inspected, Used I d Reco R onditioned, di i d Rebuilt R b il andd N New Parts P Available il bl

,iLÕ ÌÊÈ <ÊEÊÓ7-ÊÌÀÕV Êi } iÃ

Rebuilt 777D Cylinder

iÜÊ >ÌÊÎ{xÎÓäxÊ/ Ê Ê x{»Ê ÕV iÌ

PA A

» »

®

cs

1-877-544-3155 www.ClevelandBrothers.ccom *Only rebuilt parts are dyno-tested and come with a 6-month warranty. Some exclusioons may apply.

» »

Page 18 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

800-899-3580 sales@berlon.com 331 Riverview Drive • Hustisford, WI 53034 18903 High Point Rd • Viola, WI 54664

LOWE® Trenchers

FUEL EFFICIENT PUMPS FOR SALE & RENT

WEE HAVE PUMPS IN STOCKK!

Skid Steer Grapples Berlon’s Skeleton Rock Grapple has dual independent claws for complete clamping down on awkward loads. This bucket is ideal for rock picking, clearing fence lines, construction, scrap metal and other clean-up applications.

Skid Steer Buckets The LOWE® trenching attachments have proven to be one of the most useful tools in the attachment market. Primarily used on skid steer loaders, trenching attachments also excel on compact track loaders and a wide range of mini-loaders.

With a large selection of boom lengths and digging chains available, the LOWE® trenching attachment can make your machinery investment more useful.

LOWE® Augers The BP-Series planetary reduction auger drives bring elements of performance and dependability to the attachment marketplace.

-Features include: increased gear strength, stronger shaft support and through hardened alloy drive shaft.

www.berlon.com

Berlon’s Heavy Duty Extended Lip bucket provides greater cutting edge visibility while standard heavy duty package makes it ideal for machines 75HP and greater.

Features include: ¼” body, Reinforcement tube across back of bucket for added strength, Bucket bottom includes a heavy-duty dimple plate *A Berlon Exclusive*, 3/4”x6” weld-on cutting edge w/holes.

Berlon’s Compact Articulating Loader bucket is ideal for loading feed mixers and other heavy duty material handling equipment.

Features include: ¼” body, Reinforcement tube across back of bucket for added strength, Bucket bottom includes 5 wear bars for durability, 3/4”x6” weld-on cutting edge with holes.

www.loweman.com

Self-Priming Tr Trash Pump

aflo™ Submersible Hydraulic Tr Trash Pump

Rotoflo R Rot oflo™ Wellpoint Dewatering

Rotary Wellpoint, Wellpoint Se Self lff--Prriming Dewatering & Hydraulically-Driven B Bypass Trash Pumps

f a FREE Project Call for ew: 772-770-0004 Revie

Big Pumps with Flows fro om 5-1M GPM

Paull@mwipumps.com

Turn-key & Cost-Effective e Solutions

pumps.com mwip

Fast Response, Expert Se ervice & Repair The Power to Move ve W Wa ater® Since 1926 | mwipumps.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 19

Page 20 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Carolina Cat Hosts More Than 500 Professionals at Next

C Uwharrie Environmental in Mount Gilled, N.C.; and Mitch Christenbury, Mike Kunz and Brian Hoffman, all of Carolina Cat.

(L-R): Jeff Raper and Daniel Church, both of Bottom Land Site Solutions in Statesville, N.C., are learning about the Cat 308 excavator from Natasha Demaio of Carolina Cat.

The Cat 740 ejector and 740 GC trucks feature the latest worksite technology, including stability assist and traction control. (L-R) are Scott Thomas, Caterpillar; and Josh Surrett, Mark Ross and Austin Capps, all of Tennoca Construction in Asheville, N.C.

(L-R): Nathan Skipper of Carolina Cat goes over the advanced Cat 340 excavator with Colby and Drew Turner, both of Turner Site Services in Charlotte, N.C.

arolina Cat held a Next Generation Demo Days event Oct. 11-13, at an expansive 20-acre quarry in Midland, N.C. The event drew more than 500 customers, including a diverse group of industry professionals, equipment manufacturers and potential buyers. Attendees were provided with a unique opportunity to experience the latest cutting-edge construction, power, paving and technology equipment up close and personal.

The event showcased an extensive collection of more than 50 pieces of equipment, including dozers, excavators, articulated trucks, compact track loaders and more. In addition to equipment demonstrations, the event hosted an array of partners and vendors booths, providing an in-depth opportunity to explore Carolina Cat’s product offerings and services. Vendors included Atlas Copco, Multiquip Inc., B2W Software Inc., Wanco Inc., Allmand, Genie, Hydrema and Tenna.

Carolina Cat also provided attendees with an opportunity to learn more about SITECH Horizon, Power Products and Solutions, Prime Source and Hydraulics Express.

“Carolina Cat would like to extend its heartfelt gratitude to all the attendees, sponsors and employees who made Carolina Cat Demo Days a resounding success,” the company said. “The event truly reflected Carolina Cat’s unwavering dedication to providing exceptional equipment solutions and fostering the growth and prosperity of the construction and heavy equipment industries.”

On the final day of the event, Carolina Cat closed its doors to the public and hosted an exclusive, employeeonly continuation of the Demo Days event, organized by the company’s Women LEAD Employee Resource Group. With more than 100 attendees, the Women LEAD event extended the Demo Days theme to employees, offering women a unique opportunity to network, explore mentorship avenues and receive hands-on tutorials on various Cat products. The event also featured two accomplished women leaders from the construction industry, who shared their experiences and offered mentorship advice to women working in the field.

“The event was a huge success,” said Christy Smith, marketing manager of Carolina Cat and member of Women LEAD. “We received a ton of positive feedback and notable achievements throughout. We are so proud to have organized such an inspiring and educational event and we look forward to hosting similar events in the future.”

The event allowed attendees to engage with the latest technologies and innovations in the industry while learning from experienced professionals. This Women LEAD event marks a significant milestone in the company’s commitment to promoting diversity and equality in the workplace, creating a welcoming and inclusive environment for all employees, the company said.

Overall, the event served as an informative platform for women to learn from industry experts, network with peers and gain insights into the latest trends and developments in the construction industry.  CEG (All photographs in this article are Copyright 2023 Construction Equipment Guide. All Rights Reserved.)

(L-R) are Shawn Elliott of Caterpillar; and Chad Wesson, Jaida Wesson Mangum, and Zach, Nate and Seth Wesson, all of Two Brothers Utility in Shelby, N.C.

Rita Chess of Broad River Landmarks in Mooresboro, N.C., operates the small, but mighty Cat 300.9 mini-excavator.

(L-R) are Joseph Wainwright, John Meade, Wayne Thompson, Lauren Belt, Eric Becker and Mitch Christenbury, all of Carolina Cat; and Joshua Buchman, Malcolm Klepp, Lance Hanna and Nelson Cook, all of Blythe Construction, a division of Vinci USA in Charlotte, N.C.

Cat tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks and other obstacles, as well as to more easily reach along ditch edges.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 21

Generation Demo Days at 20-Acre Quarry in Midland, N.C.

Attendees had an opportunity to test out a variety of the latest Cat excavators.

(L-R) are Jason Mauney, Avery Hill and John Mullis, all of Wayne Brothers Inc. in Davidson, N.C.

The Cat 740 ejector can unload material while moving or stationary.

The Women LEAD event extended the Demo Days theme to employees, offering women a unique opportunity to network, explore mentorship avenues and receive hands-on tutorials on various Cat products.

Carolina Cat also had several paving products on hand for its customers to look over.

A Cat 938 wheel loader gets put through its paces.

An attendee tests out a Cat D1 dozer.

Real world operating conditions were set up for the attendees.

Food trucks offered a variety of favorites that everyone enjoyed.

Many machines were on hand for the attendees to test out.

Caterpillar D1, D4 and D6 dozers were all available for attendees to operate.

The Cat 950 wheel loader picks up another full load with ease.

Attendees of Carolina Cat Demo Days could operate several models of Cat excavators.

Carolina Cat also had an operator simulator on hand. Here, an attendee learns how to operate a Cat D6.

Page 22 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GOOD BUYS ON

NEW & USED IRON

Linder Industrial Machinery to Buy Cumberland Tractor

SOLD

2006 CAT 140H VHP 9400 HRS, RIPPER, PUSH BLOCK, TOP-CON GPS STAYS ON GRADER 75% PLUS RUBBER, EXCELLENT CONDITION

$115,000

2018 TERRAMAC RT14R

2022 KOMATSU D51PX-24

1900 HRS, NEW U/C, ALL SERIES II UPDATES, EXCELLENT CONDITION

$187,500

1230 HOURS, LIKE NEW

$157,500

Guy Roof 2036 Bishop Rd. Greensboro, NC 27406

2014 KOMATSU PC490LC-10

2022 CAT 313

8,900 HRS CWT REMOVAL, HYD COUPLER, 66" BKT 50 TO 60% UC OVERALL EXCELLENT COND

560 HRS PROGRESSIVE LINK CAT HYD. THUMB, 2D GRADE CONTROL, 90% U/C 5YR 3,000 HR. PREMIER WARRANTY

$105,000

336-382-9715 cecarolinasinc@aol.com

$179,000

Free Delivery within 200 Miles!

Satisfaction Guaranteed!

SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs.

SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries.

Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Linder Industrial Machinery expanded its equipment dealership network by purchasing Cumberland Tractor in Fayetteville, N.C.

Linder Industrial Machinery expanded its equipment dealership network by purchasing Cumberland Tractor in Fayetteville, N.C. “We look forward to growing the great reputation and contributions that Cumberland Tractor has made to this community over the past 65 years,” says John Coughlin, president and CEO of Linder.

Linder will continue offering Kubota construction and agricultural machines at the 1530 Middle River Loop location, along with the full line of Komatsu and BOMAG heavy equipment and many complimentary products and attachments. Cumberland Tractor owners Jack and Charles Horne were very excited about Linder’s products combined with the Kubota line-up.

“I have had a long relationship with Linder and even a longer one with Komatsu. The combination of all this topquality equipment under one roof has been my dream for many years,” Jack Horne said.

Linder now has 20 locations in the Carolinas and Florida.

Four of these branches now represent Kubota equipment under the name “Linder Turf & Tractor.” Fayetteville joins Greenville, North Carolina, a new location in Greensboro, N.C., and a branch in Bradenton, Fla., all flying the Kubota flag.

“Our customers have always benefited from our dealer network,” said Coughlin. “We are the number one Komatsu dealership in the United States and now have four Kubota stores; this gives us advantages over smaller dealers. We can offer the people of Fayetteville a greater variety of equipment and get machines faster than others.”

Linder employs more than 600 people in three states; 2023 marks its 70th year in operation; the company has been in the Carolinas since purchasing Mitchell Distributing Company in 2003.

For more information, visit www.linder.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 23

Page 24 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CAT 12H MOTORGRADER ..........$89,000 2023 CAT 320 EXCAVATOR, 390 HOURS 2007 INTERNATIONAL BUCKET TRUCK, ..................................................$235,000 55FT ............................................$43,000

Unicontrol, the Scandinavian company transforming the 3D machine control landscape, proudly announces its strategic partnership with North Carolina-based Benchmark Tool & Supply Inc.

2007 KW T800 CAT C13..............$42,000

2018 MASSEY FERGUSON 4607M BROOM TRACTOR ......................$14,900

Southern Quality Truck & Equipment Inc. Colin Thain Cell: (803) 513-2252 433 Burton Rd. • Lexington, SC 29072

www.sqtrucks.com

North Carolina, South Carolina, Virginia, West Virginia

Powerscreen Mid-Atlantic, Inc. PO Box 2505 • Kernersville, NC 27285 Tel: 800-797-7276 Web: www.powerscreenmidatl.com

Benchmark Partners With Unicontrol for 3D Machine Control Unicontrol, the Scandinavian company transforming the 3D machine control landscape, announced its strategic partnership with North Carolina-based Benchmark Tool & Supply Inc. This collaboration is a significant move to provide groundbreaking, user-friendly solutions for earthmoving machines across the U.S. East Coast.

Eric Teague, CEO at Benchmark Tool & Supply, said, "Unicontrol is precisely what the underserved segment of our industry has been looking for — a cost-effective, userfriendly system with built-in flexibility that adapts to the local needs of the construction industry and complements our existing portfolio of end-to-end solutions.

"Furthermore, the integrated diagnostics tool taps into our proactive approach to customer service, monitoring and support.”

With nearly two decades of experience in construction technology, Benchmark Tool & Supply is primed to be a driving force behind Unicontrol’s North American expansion. Based in Raleigh, N.C., with local offices on the East Coast and a growing eCommerce platform, Benchmark Tool & Supply is invested in the ongoing support of its customers, making a virtue of becoming their trusted advisor.

The Unicontrol software platform’s core strength lies in its ability to mass customize. This allows for perfect adaptation to local circumstances and optimal utilization across machine types and sizes, combined with an unparalleled 3D machine control solution for the compact machine segment, the company said.

Together with Benchmark Tool & Supply’s focus on customer service and training, it enables an improved operator experience and an enhanced return on investment through streamlined efficiency.

Unicontrol’s 3D machine control systems are setting a new industry standard with an approach toward simplicity, swift integration, and cost-effective pricing. Across the U.S. construction industry, delays, cost overruns, and a severe shortage of skilled labor pose a significant challenge to construction projects. Benchmark and Unicontrol’s commitment to elevating user experience has propelled their highly reliable 3D machine control systems to the forefront, the company said. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 25

Page 26 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 27

Page 28 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The 2024 HCEA Calendar Is A Av vailable!

John Deere 210G, New engine installed by John John Deere 444K, Quick disconnect w/ bucket Deere with only 100 hrs, A/C, FM/AM ....$110,000 and forks, A/C, 5,200 hrs ..........................$75,000

Featuring 12 beautiffu ully restored 8” x 10” black-and- white photographs of construction and mining machiner y from the early and mid 20th Centur y.

It’s the only calendar of this ty yp pe offer e ed!

Order yours today! arge postage.

STILL Only $10 Each, but we have to cha See table at right.

John Deere 544K, JRB quick disconnect w/ buck- John Deere 85G, A/C, New motor, starter & injecet & forks, New fuel pump & injectors, A/C, tors, 3,900 hrs ..........................................$75,000 AM/FM radio..............................................$75,000

All otth herrss, please call or email infffo o@hcea.net ffo or quote.

O rder online at ht t p:/ // /s / s tore.hc ea s tore.c om/c alendar s .ht ml , by mail wi t h p ay m e n t m a d e t o t h e H C E A a t 1 6 6 2 3 L i b e r t y H i Ro a d , B o w l i n g G r e e n , O h i o 4 3 4 0 2 , o r w i t h yo u r c r e d i t c a r d b y p h o n e a t 4 1 9 - 3 5 2 - 5 6 1 6 .

Dealers! Contractors! Producers!

Quality Used DEERE Machines

Custom mized our for yo ness busin

MACE EQUIPMENT COMPANY 41 Tresca Rd. • Jacksonville, FL Call for more info: 904-723-5959 Or e-mail: justine.maceequipmentco@gmail.com

US SA A Customers, please add postage & handling Qty P&H 1 $3.00 2 $3.75 3 $4.50 4 to 7 $12.00 8 to 14 $18.75 15 or more $22.45

Makes a great holiday gift!

Promote your business year-round with your o ow wn customized HCEA Calendars! Custom imprin nts av a vailable in quan nttities of 25 at diiscounted price. d

Call us at 419-352-5616 for details.

THANK YOU FOR YOUR SUPPORT!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 29

PLEASE CONTACT YOUR LOCAL DEALER: VIRGINIA

allroadsequipment.com

! "

! " ! " # "

Bealeton: 540-439-0668 • Chesapeake: 540-485-2100 Chester: 804-748-6411 • Fishersville: 540-887-8291 Salem: 540-380-2090

beardequipment.com

jamesriverequipment.com

ALABAMA

NORTH CAROLINA

Mobile: 800-848-8563

Ahoskie: 252-332-5550 • Asheville: 828-667-0176 Charlotte: 704-597-0211 • Elizabeth City: 252-679-7590 Fayetteville: 910-424-1200 • Greensboro: 336-668-2762 Greenville: 252-758-4403 • Monroe: 704-220-2575 Mt. Gilead: 910-439-5653 • New Bern: 252-638-5838 Raleigh: 919-772-2121 • Statesville: 704-872-6411 Wilkesboro: 336-973-8201 • Wilmington: 910-675-9211

FLORIDA Freeport: 850-835-3337 Jacksonville: 904-296-5000 Lake City: 386-752-9544 Ocala: 352-732-4646 Palatka: 386-325-6268 Panama City: 850-769-4844 Pensacola: 850-476-0277 Perry: 850-584-9200 Tallahassee: 850-575-5600

SOUTH CAROLINA Rock Hill: 803-325-1555

www.mccoycf.com dobbsequipment.com

ALABAMA Dothan: 334-794-8691 Troy: 334-566-4181

TENNESSEE Chattanooga: 423-855-0633 • Kingsport: 423-349-5001 Knoxville: 865-546-3207 • Nashville: 615-501-8600

FLORIDA Fort Myers: 239-334-3627 Lutz (New Tampa): 813-995-0841 Miami: 305-592-5740 Orlando: 407-299-1212 West Palm Beach: 561-848-6618 PARTS ONLY: Pompano Beach: 954-977-9541 Riverview: 813-621-4902 Sarasota: 941-960-2004

GEORGIA

$ % % * - , , . /

$ % & ' (

* $ %

) $ %

& + , (

& (

Adairsville: 770-773-9857 Albany: 229-888-1212 Atlanta: 404-691-9445 Braselton: 770-965-1889 Brunswick: 912-264-6161 Columbus: 706-687-3344 Grovetown: 706-855-5440 Macon: 478-788-1586 Savannah: 912-964-7370 Valdosta: 229-474-6680

SOUTH CAROLINA Andrews: 843-221-4940 Aynor: 843-358-5688 Ladson: 843-572-0400 Simpsonville: 864-963-5835 Walterboro: 843-539-1420 West Columbia: 803-794-9340

striblingequipment.com

ARKANSAS Arkadelphia: 870-246-8678 • Camden: 870-574-0290 Fort Smith: 479-646-8381 • Jonesboro: 870-268-9900 Little Rock: 501-455-2540 • Monticello: 870-367-3496 Springdale: 479-756-9779 • Texarkana: 870-772-9321

MISSISSIPPI Biloxi: 228-396-2300 • Brookhaven: 601-835-4400 Columbus: 662-328-0820 • Hattiesburg: 601-544-3000 Jackson: 601-939-1000 • Meridian: 601-482-5575 Natchez: 601-442-3613 • Philadelphia: 601-656-1997 Tupelo: 662-844-3212 • Winona: 662-453-7556

TENNESSEE Jackson: 731-422-2542 • Memphis: 901-345-5294

Tractor and Equipment

warriortractor.com

ALABAMA Graysville: 205-675-9045 • Madison: 256-233-1914 Monroeville: 251-575-7111 • Montgomery: 334-277-7260 Northport: 205-339-0300 • Oxford: 256-831-0921 Pelham: 205-988-4474

NPK MANUFACTURES AND MARKETS THE GREATEST SELECTION OF: 0 0 1 1 2 1

1 2 1 2 1 3 ? ) @ ! A 4556 7 8 99:9; 559: 7 996 <=< 4>66

' A

Page 30 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JACKSONVILLE LOCATION

POLK CITY LOCATION

103 BRYAN STREET JACKSONVILLE, FL 32202 PH 904-354-5746 FAX: 904-355-1891

600 N. COMMONWEALTH AVE. POLK CITY, FL 33868 PH 863-984-6262 FAX: 863-984-6363

Remanufactured Doosan Portable Air Compressors HP750WCU-T3 & HP915WCU-T3 Models Available NO DEF FLUID NEEDED Full Factory Warranty Financing Available

EMPLOYMENT OPPORTUNITIES

Traveling Road Warrior's Sales Job Long distance traveling sales position available calling on established building material dealers, hardware stores, pipe distributors, and contractors while also searching for the new accounts always emerging in America's construction industry.

A Road Warrior's job requiring three and four nights out weekly to cover SC, GA, and Alabama.

Salary, commission, health benefits, and 40,000 miles per year or more car expense mileage paid.

WE SELL AND RENT EVERYTHING NEEDED FOR ANY ABRASIVE BLASTING JOB RENTALS, SALES, SERVICE, PARTS, COMPRESSORS, GENERATORS, LIGHT TOWERS, ABRASIVE BLASTING EQUIPMENT, DUST COLLECTORS, AIR DRYERS, DEHUMIDIFIERS, MANLIFTS

Call 800-334-5071 or 910-525-4046 for scheduling an interview and resume mailing details.

Trnsact Surpasses $1B in Application Transaction Requests

Get the best for less.

U55-5

47.6 Gr G oss HP

Call Eric for Service & Brian for Parts.

Now’s the time to save on the e world’s #1 selling line of compactt excavators for 20 years.* Stop p by your local dealer today.

FOR UP TO 36 MO A ONTHS $0 DOWN 0% APR SA AV VE UP TO $2,7 700** OR

VISIT US TODA AY Y FOR THIS LIMITED-T TIME OFFER

KubotaUSA.com *According to 2022 daata from Off-Highway Research incluuding all Kubota Group brand sales. © Kubota Tractor Corporaation, 2023. **$0 Down, 0% A..PP..R. financing for up to 36 months or a customer instant rebaate of o $2,700 on U55-5 U55 5 equipment from participating dealers’ in in-stock stock invventor ventory. Promotional rate available to qualified purchasers through KKubota Credit Corporaation, U.S.A.; subject to credit approval. Examplee: 36 monthly payments of $27.78 per $1,000 financed. Rebaates not available with 0% A.PP..R. or other promotional financing. Offers exppire 12/31/23. Terms subject to change. This material is for descripttive purposes only. Kubota disclaims all representations and warrantiess, express or implied, or any liability from the use of this maaterial. FFor complete warranty, disclaimerr, safety, incentive offer and product information, consult your Dealer or KubotaUSA.com.

704-233-4242 800-443-7569 Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm

3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com

Trnsact Inc. announced that the company has processed more than $1 billion transaction requests on its Software-asa-Service platform.

The Trnsact platform enables thousands of on-road and off-road equipment dealers to digitize their sales, finance and insurance processes. The platform provides a variety of solutions including online credit applications, automated payment offers, instant lender decisioning, lending-as-a-service and automated workflows. It connects dealers with their preferred lenders via secure and digital workflows.

“We have transformed the way financing is done for customers, dealers, lenders and the entire ecosystem. The continued exponential growth in our business is a testimony of the value we are adding for our customers,” said Trnsact CEO and co-founder Beckham Thomas.

“We are committed to delivering better solutions and innovative products for industry stakeholders to not just manage credit applications, but also grow their market share with happier vendor partners.”

With the rapid expansion of its customer base and the adoption of its platform by a broad spectrum of vendors nationwide, Trnsact expects to reach the next billion-dollar mark in less than half the time by Q2 2024.

For more information, visit www.trnsact.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 31

MADE FOR R

AMERICA A SERVICE THAT’S T

LOCAL SCHEDULE E A DEMO

TODAY

WITH A LOCAL DEALER R

sanyamerica.com m

Award Winning

SW405K

Page 32 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SISO Air Holds Demo Event at Thompson Tractor in Ala.

A

t 10 locations across three states over a limited timeframe, SISO Air representatives have been holding their “SISO Air Tour-Fall 2023.”

The company holds these events to provide current and prospective customers an opportunity to see firsthand what’s available in the latest in drone technology.

The tour recently made a stop Oct. 18, 2023, at Thompson Tractor’s facility in Opelika, Ala. The tours combine the expertise of SISO Air, Sitech South and the local Caterpillar dealers. SISO Air is the drone division of Sitech South and works with customers across the country who have a need for drone technology, including engineering, construction and military use with the goal of complete sales, support and training, regardless of what the application may be.

SISO Air representatives said that some of the technology it presents may seem complex and maybe a “a bit of a mountain to overcome,” but, it added, the company has a support team that can educate and explain-and-train from the ground up. According to the company, whether a contractor is just getting started or is a seasoned expert, it has resources and tools to provide the educational level requested or required — from novice to expert.

SISO Air works with approximately a dozen manufacturers for its hardware/software/accessories offerings. If taking on a new line, SISO Air requires the drone or software manufacturer to come in and train their staff on all aspects of the product and support from top-to-bottom.

“We don’t want our customers to have to rely on someone else’s 800 number for support,” said SISO Air’s Layne Meylain. “We are the first and often the final line of support for the products we sell. We know every product we sell intimately. With each drone manufacturer we represent, we get an inside look and education of the inner workings of the products and then we present that information to our end user customers. SISO Air serves as an extension of the manufacturer. That’s what sets us apart.

“Our staffing is from an engineering, surveying and technology background,” he added. “Not only can we teach this technology, but because of our collective backgrounds, we can also show our customers how to integrate drone technology into their work. We understand what the construction companies are doing and what they’re hoping to get out of their drone. We can show how to maximize the benefit of drone technology and how to achieve the desired deliverables. All our staffers are Part 107 pilots and are certified and licensed by the FAA to fly drones. We provide a complete hands-on training where there is absolutely no guesswork with what we do.”

“Quantifying the exact savings by using drones on job sites varies from site to site,” added SISO Air’s Joseph Johnson. “But in the long run, universally, there is a savings for every site, especially where machine control technology is being used.”

The demonstrations highlighted the aspects of drones removing human error in site prep work, while at the same time, inserting more safety precautions.

“SISO Air is simply de-mystifying the process of drone work which makes this literally obtainable for everyone,” Meylain said. “We don’t send out drones and a video. A new customer can expect an in-person demonstration and live support going forward.”  CEG (All photographs in this article are Copyright 2023 Construction Equipment Guide. All Rights Reserved.)

In its ongoing series of demonstrations, SISO Air recently stopped at Thompson Tractor in Opelika, Ala., to host another successful demo event.

The DJI M350 RTK drone with Phoenix LiDAR Systems RECON-XT launches and provides great images for the attendees to view.

Dialing in the Trimble Siteworks Positioning Systems for demonstrating machine guidance on a Cat 308cr mini-excavator are Adam Jones (L) and Stephen Miraglia of Sitech South.

SISO Air’s Joseph Johnson provides an in-depth presentation of a variety of the most popular drones that his company sells and supports.

See here is the flight of the WingtraOne GENII for photogrammetry, used for surveying on construction sites.

Discussing the drone flights and technology demos (LR) are Curt Cope, Alexander Contracting Co., Fortson, Ga.; Robert Angel, Sitech South; and John Colson, also of Alexander Contracting Co.

Meeting up at the demo (L-R) are Mike Henderson, Sitech South; Benjamin Phillips, Evergreen Siteworks, Opelika, Ala.; Derick Freeman, Thompson Tractor; and Gordon Chism and Charles Carl of Bailey-Harris Construction Co., Auburn, Ala.

SISO Air’s Joseph Johnson (L) and Layne Meylain (R) talk with one of their regular customers, J.D. D’Arville of ALDOT Maintenance Operations about the state of Alabama’s overall successes and cost-savings utilizing SISO Air drones.

Mark Giddy (L) of Sitech South talks with power industry specialist Glynn Wright of ProgUSA, based in Longwood, Fla., about his company’s latest diagnostic techniques using drones supplied by SISO Air.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 33

Page 34 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Liebherr Holds Earthmoving, Material Handling Seminar Liebherr USA Co. Earthmoving and Material Handling Technology held an onsite sales and training seminar for both internal and external distribution network participants to receive extensive product knowledge and hands-on machine time featuring the bulk of the product segment’s offerings.

The event consisted of five classroom sessions for participants to learn extensive product information from Liebherr experts, followed by tours of the Liebherr USA Co. headquarters and the neighboring Liebherr Mining Equipment facility.

The Liebherr team and all participants were then transported to a local Liebherr quarry to allow for seat time on a wide range of Liebherr’s earthmoving and material handling technology products.

“In a more and more digitalized world, inperson trainings continuously serve as the dynamic heartbeat of distribution networks, forging of connections, and conveying essential information about Liebherr earthmoving and material handling equipment,” said Kai Friedrich, divisional director of earthmoving and material handling technology. see LIEBHERR page 84

More than 70 participants joined Liebherr USA Co. Earthmoving and Material Handling team at a local quarry to receive hands-on training.

Participants received theoretical knowledge in the classroom for each machine presented.

Material handler training

Each participant completed a full walk around, participated in hands-on training, and received individual seat time in the Liebherr TA 230 articulated trucks.

Wheel loader training

Crawler excavator training

Dozer training

Paving

SECTION

Pages 35-53

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Fall Weather Greets Golfers for GOMACO Invitational #41

The Ida Grove tournament champion team members included (L-R) Dennis Kloke of Croell Inc.; Marc Grote of IFP Motion Solutions; David Barthel of Faris Machinery; and Josh Held of Fabick CAT.

The GOMACO Invitational “Grand” Champion team was from the Mapleton golf course and included (L-R) Mike Mandozzi of Construction Equipment Magazine; Mark Brenner of GOMACO; Charlie Knudsen of Concrete Technologies Inc.; and Blake Driskell of Gerdan Slipforming.

Approximately 320 guests from the United States and Canada were welcomed into the city of Ida Grove for the GOMACO Invitational #41 to enjoy the best of Iowa’s fall weather for two days of golf and camaraderie. There were 256 participants in the two-person Putting Tournament and 320 in the four-person Scramble Tournament held Sept. 19 to 20, 2023. The GOMACO Invitational is the company’s annual golf event and was held at the Ida Grove Golf and Country Club and three surrounding courses, including Holstein, Mapleton and Schleswig.

The GOMACO Invitational began at the Ida Grove Country Club, with the Putting Tournament. Teams of two putters were computer generated to participate on four different greens on the course, with the top team from each green advancing to the Putting Championship. This year’s championship team was Torey Koch of Bierschbach Equipment & Supply Co. in Sioux Falls, S.D., and Tom Farr of GOMACO. The Contractors’ Shoot-Out followed the Putting Tournament. The Shoot-Out featured six teams of GOMACO contractors competing in a

five-hole competition, with the highest scoring team eliminated on each hole. This year’s Contractors’ Shoot-Out Champions were Neil McFadden of Smith Paving & Excavating Inc., in Norwalk, Ohio; Derek Dilger of Smith Paving & Excavating Inc., in Norwalk, Ohio; and Neil Galloway of Island Slipforming, in Victoria, B.C., Canada.

The Invitational Scramble best-ball tournament was held on four area golf courses. Teams of four golfers played 18 holes with each course crowning a champion. The champion teams then played a three-hole scramble tournament at the Ida Grove golf course to earn the title of GOMACO Invitational #41 Grand Champion. The highest-scoring team was eliminated on each hole until only one remained. The Grand Champion team was from the Mapleton golf course and included Mike Mandozzi of Construction Equipment Magazine, Arlington Heights, Ill.; Mark Brenner of GOMACO, Charlie Knudsen of Concrete Technologies Inc., Grimes, Iowa; and Blake Driskell of Gerdan Slipforming, Cape see GOMACO page 50

The champion team from Schleswig included (L-R) Al Meyerdirk of SunSource; Tom Farr of GOMACO; Brandon Bates of Millstone Weber LLC; and Randy Cleland of Minnich Manufacturing.

The Holstein champion team included (L-R) Clint Golay of Berry Tractor and Equipment Co.; Bob Newman of Road Machinery & Supplies Co.; Mike Milenkovich of Kiewit Corporation; and Zach Corrigan of GOMACO.

Page 36 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Richmond Machinery

866-685-4998

The Paving Equipment Professionals www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 35 Years

2015 Rosco Trupac 915 roller, 9 wheels, Kubota diesel engine, water system - $37,000

New Marathon TPS250PT tack distributor, gas engine, 10GPM pump, 250 gal, spray wand w/50 ft hose, hose reel, propane burners, flushing system, electric brakes - $17,500

New Marathon TPS500PT tack distributor, gas engine, 18GPM pump, 500 gal, spray wand w/50 ft hose, hose reel, 6 ft spray bar, operator’s platform, propane burners, flushing system, electric brakes - $30,200

2018 Bomag BW135AD-5 double drum 51.18” vibratory roller, Kubota dsl eng, water system, 4 ½ ton roller - $35,000

2015 Hamm HD12VV double drum 47” vibratory roller, water system, Kubota diesel engine, 3 ton roller - $31,000

2015 Freighlinter Etnyre Centennial II distributor, 2000 gallons, BT-1 computer controls, 12 ft spray bar, diesel burners, Cummins ISL dsl eng, auto trans, 2 spd axle - $125,000

2002 Etnyre Centennial II distributor, 2000 gallons, computerized, propane burners, 14 ft spray bar, Sterling w/Cummins 5.9L diesel engine, Eaton manual 5 spd trans, 2 spd axle - $64,000

2008 Bomag BW9AS double drum static roller, Cummins 3.3L diesel engine, 50” drums, water system - $11,800

2014 Superior DT80-J broom, John Deere 4045T turbo diesel engine, 8 ft broom, heat & a/c, water system, New tires - $35,000

3517 Wayne White Rd., Climax, NC 27233

1701 Roseneath Road • Richmond, VA 23230 (804) 359-4048 • www.richmondmachinery.com

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 37

Hills Machinery www.hillsmachinery.com NORTH CAROLINA SOUTH CAROLINA 2901 Manufacturers Rd. Greensboro, NC 27406 (336) 308-3045 (888) 436-5088 415 Belvoir Hwy. Greenville, NC 27834 (252) 752-7145 1501 Hedingham Blvd.

Raleigh, NC 27604 (919) 746-7938

11717 Reames Road Charlotte, NC 28269 (704) 208-5564

1014 Atlas Way Columbia, SC 29209 (803) 658-0200

5481 Old Haywood Rd. Mills River, NC 28759 (828) 820-5265

Richmond Machinery & Equipment Company www.richmondmachinery.com

Linder Industrial Machinery www.linder.com 110 Halsema Road South Jacksonville, FL 32220 (904) 786-6710

1601 South Frontage Road Plant City, FL 33563-2014 (813) 754-2727

7168B Cross County Road North Charleston, SC 29418 (843) 225-9377

2441 SW 57 th Avenue Ocala, FL 34474 (352) 629-7585

16878 Domestic Avenue Ft. Myers, FL 33912 (239) 337-1313

11 Dixie Circle Greenville, SC 29605 (864) 546-5208

23 Taft Vineland Road Orlando, FL 32824 (407) 849-6560

4801 Dyer Blvd Riviera Beach, FL 33407 (561) 863-0570

1701 Roseneath Road Richmond, VA 23230 (804) 359-4048

20900 Taft Street Pembroke Pines, FL 33029 (954) 433-2800

RJV Equipment www.rjvequipment.com 140 Charter Place LaVergne, TN 37086 615-793-7576 3356 Rudy Street Knoxville, TN 37921 865-970-2840

Page 38 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

NCDOT Prepares U.S. 70 for Future as Interstate 42 NCDOT from page 1

Morehead City is one of two ports in North Carolina, receiving massive cargo ships traveling through the Panama Canal. In addition to ferrying goods from the port to various regions of the state, the upgraded highway will help service a Marine Corps Air Station and Coastal Carolina Regional Airport. Military bases in Goldsboro and Havelock also will be affected by the new interstate quality roads. In addition, semi-rural areas of the eastern part of the state will have greater access for travel and economic activity.

In decades past, a new interstate would plow through new territory, while this upgrade will snake through business and residential areas in James City just outside New Bern.

The James City section of the upgraded freeway is a 5-mi. piece of U.S. 70 that carries several challenges. The road is bordered on the north by the Neuse River and to the south by

a busy railroad which precluded interruption for highway construction.

Threading an upgraded road through a nest of businesses and residences has fallen to resident engineer Wendi Johnson and contractor Balfour Beatty. The contractor also will be responsible for building another section of the upgraded U.S. 70 (future I-42), the Havelock Bypass. The James City section of U.S. 70 is a design-build project planned for completion in late 2025. Construction will cost $234 million, with the final price tag at $322 million.

Relocating utilities began in 2020 with project planners needing also to relocate some 40 businesses and 17 homes.

“We have to build this project from the outside in,” said Johnson, project engineer of the job. “Rather than working on the heart of the project first, upgrading 70 to interstate standards, we have had to rebuild and relocate service roads

North Carolina DOT photo

Workers are doing divergent channel construction for installation of a new box culvert.

first so we would have places to reroute traffic for construction.

Of course, workers needed to relocate numerous utilities, which has been time consuming. Utilities have included water, sewer, power and fiber optics from multiple communities. The construction team has installed waterlines in 12in. diameter pipes and other utilities in 8-in. diameter pipes.

Construction workers are digging the trenches for these pipes on both sides of the new road.

Safety will be an important consideration for the upgraded highway.

“The Craven County Sheriff’s office has told us that his staff have had to respond to more accidents in this corridor than anywhere else in Craven County,” said Johnson. “The new road will be a combination of median with barrier and a grass median and guardrails. The elimination of four signalized intersections — five at grade intersections — replacing them with off ramps and on ramps.”

Motorists traveling U.S. 70 toward the coast travel some 40 mi. at interstate speeds. They are then confronted with these four signalized intersections, which slow down traffic and can result in accidents. When construction is complete, drivers will pass over these intersections and proceed toward their destinations.

The finished road will be asphalt with a portion of the old road remaining as part of the four-lane design.

Unique Challenges, Unique Solutions One unique challenge is that the ground where the new lanes will go is exceptionally soft. A traditional approach is to lay the rock subgrade where the new lanes are designed, allow the ground to settle for a period of months, then continue the build. NCDOT and the contractor decided on a different approach, one that would bring the project to the finish line months earlier.

“The contractor decided to use 250,000 cubic yards of light-weight cellular concrete,” said Johnson. “This substance uses cement and combines it with water, fly ash and a foaming agent to make a product almost like light weight cement blocks. It has the same strength as fill dirt but is much lighter. The cellular concrete approach should greatly reduce the waiting time for the next step of construction.” see NCDOT page 70

North Carolina DOT photo

North Carolina DOT photo

Before beginning major work on U.S. 70, work crews first had to build, upgrade and sometimes relocate service roads. These roads have provided better mobility and access along the corridor.

In decades past, a new interstate would plow through new territory, while this upgrade will snake through business and residential areas in James City just outside New Bern.

North Carolina DOT photo

The finished road will be asphalt with a portion of the old road remaining as part of the four-lane design.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 39

BUILT TO CONNECT

Efficiency and Productivity Designed with safety and operator comfort in mind, the Shuttle Buggy® material transfer vehicle features adaptive cruise control, bright LED lighting, four-wheel steering for easy transport and ground-level maintenance access for added convenience. Operators can rely on clear sightlines and the ground operator is safely protected inside the structure of the machine. The Roadtec SB-3000 is the perfect blend of traditional craftsmanship and modern technology.

astecindustries.com

www.altaequipment.com

www.hillsmachinery.com

www.Cowin.com

539 SW Arrowhead Terrace Lake City, FL 32024 (386) 401-5007

5151 Dr. Martin Luther King, Jr. Blvd.

Fort Myers, FL 33905 (239) 204-2719

1014 Atlas Way Columbia, SC 29209 (888) 830-5939

11717 Reames Road Charlotte, NC 28269 (886) 840-0440

415 Belvoir Highway Greenville, NC 27834 (877) 549-3232

2238 Pinson Valley Parkway Birmingham, AL 35217 (205) 841-6666

15101 AL-20, Madison, AL 35756 (256) 536-9390

1800 Culver Road Tuscaloosa, AL 35401 (205) 848-4147

8750 Philips Highway Jacksonville, FL 32256 (904) 574-4026

5210 Reese Road Davie, FL 33314 (954) 320-6741

7168B Cross County Road North Charleston, SC 29418 (866) 830-7577

5481 Old Haywood Road Mills River, NC 28759 (828) 820-5265

80 Gregory Road Leland (Wilmington), NC 28451 (910) 800-2070

35 Schillinger Road, North Mobile, AL 36608 (251) 633-4020

1501 Highway 78 East Oxford, AL 36203 (256) 832-5053

5710 Riverview Rd SE Atlanta, GA 30126 (404) 696-7210

8418 Palm River Road Tampa, FL 33619 (813) 638-0783

6144 NW 74th Avenue Miami, FL 33166 (305) 702-0974

11 Dixie Circle Greenville, SC 29605 (864) 546-5208

2901 Manufacturers Road Greensboro, NC 27406 (888) 436-5088

11129 Air Park Road Ashland, VA 23005 (804) 964-1900

4325 Northern Blvd.

Montgomery, AL 36110 (334) 262-6642

7950 Pittman Avenue Pensacola, FL 32534 (850) 479-3004

1501 Hedingham Blvd.

Raleigh, NC 27604 (888) 986-8680

6250 Hurricane Rd NE Wise, VA 24293 (276) 268-4601

9601 Boggy Creek Road Orlando, FL 32824 (407) 743-6671

Page 40 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Lighting Placement Must Be Precisely Choreographed for Optimal Results

Columbia, SC 803-791-7100 Florence, SC 843.678.8520

LIGHT from page 1

Guard. And you should think about access to natural lighting wherever possible, said the Bowie, Md., company, as it can help cut electricity usage and costs.

“Overall, being proactive and regularly assessing the lighting situation on your construction site can ensure optimal conditions,” the company added.

Shedding Light On Safety Better lighting improves safety conditions on the job site by reducing the possibility of slips, trips and falls, for starters.

Optimal visibility through proper lighting keeps employees productive and safe in performing their duties.

According to Mobile Video Guard, the right light technology also can promote on-time and in-budget project completion.

All this “while still ensuring that construction sites meet safety requirements and operate at maximum efficiency,” said the company.

And having lighting that is properly designed, installed, operated and maintained helps workers to make the right decisions more quickly with reduced risks.

“Improved lighting also increases worker morale by making the workplace environment more pleasant and comfortable,” said Mobile Video Guard.

OSHA requires that all employees who work during nighttime shifts have adequate lighting for the job they are performing. In fact, OSHA standard 29 CFR contains the minimum requirements on lighting, according to video security system provider Stealth Monitoring.

Stealth writes that OSHA also considers standards and recommendations from other agencies such as American National Standards Institute (ANSI). The original practice for industrial lighting from ANSI standard A11.1-1965, R1970 contains recommended values of illumination.

OSHA recommends that employers use this standard to determine sufficient lighting required to provide for the safety and health of employees in workplaces.

“OSHA standard 1926.56(a) only provides minimum illumination requirements for a construction site,” according to Stealth. “Your construction site might also have more stringent occupational safety requirements for exterior lighting.”

The security system company urges contractors to also know the regulations for their particular state as well as those of the state they’re working in.

BLANCHARD MACHINERY www.blanchardmachinery.com/paving

Rock Hill, SC 803.324.9600 Simpsonville, SC 864.963.3645 Myrtle Beach, SC 843-399-2074 Summerville, SC 843.871.2001 Hilton Head, SC 843-784-6766

OSHA recommends that contractors learn the rules in not only the agency’s standards but those written by ANSI and the NFPA.

In addition to ANSI, the National Fire Protection Agency (NFPA) has established lighting standards that apply to construction. NFPA standards address issues from potential sources of hazardous materials to environmental regulations, noted Mobile Video Guard.

“These include addressing the need for the proper placement and installation of lighting equipment.”

The NFPA also helps ensure the best possible design and use of lighting products to reduce risk of injury resulting from darkness or shadows.

Brighter Lighting Strategies Traditional incandescent bulbs are still common on job sites because of their affordability and easy installation.

“The warm glow of an incandescent bulb can be attractive, but they don’t always provide the best light for construction,” according to Mobile Video Guard.

They must be used in conjunction with other lighting sources to achieve a higher light output and optimal lighting conditions.

“LED lighting has become a must-have for construction sites, providing a range of benefits that are almost too good to pass up,” said the company. “With LED lights, you can see LIGHT page 42

Better lighting improves safety on the job when the possibility of employee slips, trips and falls is reduced.

CAROLINA CAT www.carolinacat.com Charlotte, NC 704-596-6700 Asheville, NC 828-251-2500 Greensboro, NC 336-294-5240 Hickory, NC 828-464-7045 Monroe, NC 704-292-1555 Boone, NC 828-268-9992

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 41

The Worldwide Leader in Concrete Paving Technology

www.gomaco.com ❘ info@gomaco.com GOMACO offers the full range of concrete slipform pavers, curb and gutter machines, trimmers, placer/spreaders, texture/cure machines and bridge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+® control system, created in-house by our software engineers from the wants and needs of contractors paving in the field. At the heart of GOMACO equipment is our passion for concrete and our commitment to our customers. We look forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs. Our worldwide distributor network and our corporate team always stand ready to serve and assist you.

STOWERS MACHINERY CORPORATION www.stowerscat.com/gomaco

YANCEY BROS. CO. www.yanceybros.com

RING POWER www.ringpower.com

Chattanooga, TN 423-698-6943

Knoxville, TN (West) 865-218-8800

Austell, GA 800-282-1562

Calhoun, GA 800-752-9804

Macon, GA 800-633-5180

Valdosta, GA 800-755-6841

St. Augustine, FL 904-737-7730

Jacksonville, FL 904-714-2600

Orlando, FL 407-855-6195

Tallahassee, FL 850-562-2121

Crossville, TN 931-484-4040

Sevierville, TN 865-595-3750

Albany, GA 800-768-2892

Columbus, GA 800-633-5240

McDonough, GA 855-901-0100

Washington, GA 888-678-3211

Brooksville, FL 352-796-4978

Lake City, FL 386-755-3997

Palm Bay, FL 321-952-3001

Tampa, FL 813-671-3700

Knoxville, TN (East) 865-546-1414

Tri-Cities, TN 423-323-0400

Augusta, GA 800-446-5131

Dacula, GA 800-545-2945

Savannah, GA 800-755-8382

Waycross, GA 888-948-2443

Daytona Beach, FL 386-947-3363

Lakeland, FL 863-606-0512

Sarasota, FL 941-359-6000

Brunswick, GA 800-299-5010

Kennesaw, GA 487-788-1773

Statesboro, GA 888-764-6506

Gainesville, FL 352-371-9983

Ocala, FL 352-732-2800

Page 42 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Expert Asserts Field Testing Crucial to Ensure Proper Lighting Placement LIGHT from page 40

reduce energy costs and gain excellent levels of illumination.”

They are more resistant to vibration and breakage because they are built around solid-state technology.

“That makes LED lighting ideal for construction sites, where harsh conditions can test the limits of traditional lighting fixtures.”

And with their long lifespan, maintenance staff won’t be replacing them often, so all the areas of the construction site can be properly lit for longer periods.

“LEDs also provide bright white light directly to the work area, which significantly enhances visibility,” said the company.

Lighting placement on construction sites must be carefully planned to achieve optimal conditions for working safely and effectively. Lighting should cover all areas, said the security consultant, including all spots where workers will be present and where materials and equipment are stored.

“It’s also important to ensure that there are no shadows where workers may be directly exposed, as this can be a safety hazard.”

And lighting should be placed optimally to minimize glare in order to reduce any discomfort for workers.

“Poorly placed lighting can result in a lower level of productivity due to decreased visibility and strain on the eyes.”

Plus placement must be properly and precisely choreographed to meet all safety and productivity requirements.

Natural sunlight can be a cost-effective way maximize lighting while minimizing energy costs, noted Mobile Video Guard.

Many contractors find the cost of installing and running electrical lighting is a significant chunk of the operating budget.

“On suitably sunny days, natural light can help to reduce glare and create the optimal lighting environment for construction workers,” said the security consultant.

To maximize natural light’s benefits, install large sections of glazing and use white reflective surfaces to encourage light reflection, they suggested.

“It is also important to pay attention to the sun’s path and the effects of shading.” Lighting placement should be adjusted throughout the workday.

Mobile Video Guard believes that one often underestimated tool in achieving optimal lighting conditions is the use of reflectors.

“By strategically placing reflectors around the worksite, the amount of available light can be vastly increased,” said the company.

The increased light will cast away unwanted shadows at certain areas while providing lighting to a previously invisible space in others.

“Reflectors can be especially beneficial when working on a tight budget or with limited sources of power,” said the company. “Furthermore, reflectors are easy to set up and cost-effective, making them a great option for any construction site.”

To achieve optimal lighting, the type of lights needed should be determined based on the requirements for different tasks and materials being used.

The lights should be strategically placed to maximize light coverage and to reduce shadows and dark areas, according to

Mobile Video Guard.

Lights also should be adjustable in both intensity and height, depending on the changes in the work site. They should be long-lasting, resistant to shock and weather conditions and require minimal maintenance.

Traffic Safety Warehouse says a construction zone lighting plan starts with the understanding that its development is a process that will take some time.

“There are a lot of environmental factors for you to consider,” said the online safety store.

• Draw Out the Project Area Carefully assess and draw out the designated work zone, creating a detailed, scaled image of the entire site to note where you’ll need to place certain things.

“Make sure that you’re marking the locations of all workers, machinery, and even your traffic control equipment,” said the company.

Get as clear of a picture as possible so to most effectively arrange lights. Section off zones by station and shade out places with possible obstructions.

“This blueprint will provide you with an idea of what areas might need a bit more light than others.”

• Determine Required Level of Light According to Traffic Safety, there are three main levels of lighting to consider, depending on your circumstances. Level I is the type of illumination necessary for all general working tasks — setup, takedown and moving between locations.

Level II is a bit brighter, effective in areas near large, moving construction equipment. Level III is the highest illumination for those in road construction, essential in regions undergoing intricate repairs and utilizing very powerful equipment.

“These areas must have an average light radius of 20 footcandles, while Level II and I zones must register at only 10 or 5 foot-candles,” said Traffic Safety.

Once you have light levels planned for your job site you can move on to choosing the lighting technology you’ll use.

Some lighting devices may make a better fit than others depending on the task, so be aware of all options to make the most informed decision.

Traffic safety lists four main kinds of lighting setups — portable light plant towers, balloon lighting, roadway luminaries and equipment lights. Because towers and illuminates allow you to mount additional lighting to them, they’re great for creating a wide radius of illumination. They’re also ideal for providing more directed light downward when necessary.

Balloon lighting also generates a larger area of evenly distributed light but works best when mounted to slow-moving equipment, perfect for Level II regions.

“On the other hand, equipment lights are smaller in size and fastened to signs and barricades,” said Traffic Safety Warehouse. “They’re better for providing focused light along a smaller area and directing traffic safely through the construction zone.”

Field testing is crucial to ensure lighting equipment provides the right amount of coverage for your needs.

“In fact, failing to perform this initial trial can even leave your team without light in one of the most critical zones,” said the company.  CEG

(844) 4 MY DOBBS www.dobbsequipment.com 2730 Falkenburg Road HQ Riverview, FL 33578 (813) 620-1000 4343 Northwest 77th Ave Miami, FL 33166 (305) 592-5740 3933 Martin Luther King, Jr. Blvd West Palm Beach, FL 33404 (561) 848-6618 4333 North John Young Pkwy Orlando, FL 32804 (407) 299-1212 3005 Hanson Street Fort Myers, FL 33916 (239) 334-3627 4618 Scarborough Drive Lutz, FL 33559 (813) 995-0841 1730 N. Nova Road Holly Hill, FL 32117 (407) 299-1212 1705 Columbia Lane Melbourne, FL 32904 (321) 234-3344 2710 Falkenburg Road Riverview, FL 33578 (813) 621-4902 - Parts 1751 Copans Road, Unit 8 Pompano Beach, FL 33064 (954) 977-9541 - Parts 6265 E Sawgrass Road Sarasota, FL 34240 (941) 960-2004 - Parts

www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 (404) 361-1593 180 Thunderbird Drive Richmond Hill, GA 31324 (912) 445-2880

www.richmondmachinery.com 1701 Roseneath Rd. Richmond, VA 23230 (804) 359-4048

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 43

Come See Us At Booth #401

www.powerequipco.com

www.tec1943.com 150 Piper Lane Alabaster, AL 35007 (205) 621-2489

243 South Jackson St. Grove Hill, AL 36451 (251) 275-4158

309 Hamric Drive West Oxford, AL 36203 (256) 831-2440

5336 Messer-Airport Hwy Birmingham, AL 35212 (205) 591-2131

108 Skylab Drive NW Huntsville, AL 35806 (256) 851-2222

3820 Greensboro Ave. Tuscaloosa, AL 35405 (205) 752-0621

800 Church St. N.E. Decatur, AL 35601 (256) 355-0305

2100 East I-65 Service Rd. North Mobile, AL 36617 (251) 457-8991

3305 Highway 77 Panama City, FL 32405 (850) 763-4654

4307 Reeves Street Highway 431 North Dothan, AL 36303 (334) 678-1832

3285 Selma Highway Montgomery, AL 36108 (334) 288-6580

9036 Pine Forest Rd. Pensacola, FL 32534 (850) 505-0550

3300 Dozer Lane Knoxville, TN 37920 (HQ) (865) 577-5563 4295 Bonny Oaks Drive Chattanooga, TN 37406 (423) 894-1870 1487 Rock Springs Road Kingsport, TN 37664 (423) 349-6111 320 Waldron Rd. LaVergne, TN 37086 (615) 213-0900 3050 Ferrell Park Cove Memphis, TN 38116-3502 (901) 346-9800 1545 Highway 45 Saltillo, MS 38866 (662) 869-0283

beardequipment.com 6870 Philips Highway Jacksonville, FL 32216 (904) 296-5000 2578 SE Baya Drive Lake City, FL 32025 (386) 752-9544 4539 NW 44th Avenue Ocala, FL 34482 (352) 732-4646 356 N. Hwy 17 Palatka, FL 32177 (386) 326-6268 3033 US Hwy 27 E. Perry, FL 32348 (850) 584-9200 7566 W. Tennessee St. Tallahassee, FL 32304 (850) 575-5600

Page 44 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Power Pavers Introduces New SF-3404 Slipform Paver Power Pavers announced the launch of the industry’s newest full-width, fourtrack concrete slipform paver: the Power Paver SF-3404.

The SF-3404 is built with decades of knowledge and technological advancements, delivering contractors the smoothest ride possible, saving valuable time and providing complete visibility around the machine, the manufacturer said.

It paves a maximum of 40 ft. and features telescoping endpans for 2 ft. of width flexibility on each end. In addition, a heavy-duty plow, rigid paving pans and durable slew drives make the SF-3404 highly reliable and efficient.

Also new with the SF-3404 is an optional compact, fully-controlled dowel bar insertion (DBI) system. It is equipped with a hydraulic floating floor to maintain the integrity of the initial slab and improve reconsolidation around dowel bars after the insertion process. Each time the DBI runs, the carriage recalibrates with electronic sensors to ensure the floor is exactly where it should be. In addition, the DBI is split to allow for accurate crowning and bar placement. Each bar is held and guided into the concrete to prevent skewing,

The SF-3404 paves a maximum of 40 ft. and features telescoping endpans for 2 ft. of width flexibility on each end.

even while crowning.

When running DBI, the machine utilizes a collision avoidance system to prevent center tie bars and DBI from inserting at the same location.

To create the smoothest ride possible,

the SF-3404 is equipped with the industry’s longest oscillating correctional beam (OCB) for smoothing the slab’s surface after dowel bar insertion. Power Pavers engineered a unique, heavy-duty OCB that is 30 in. tall with a 24 in. finishing length

for full coverage over the dowel insertion void. The OCB corrects any surface imperfections with ease. For transportation, the DBI, OCB, OCB wiper and final finisher are contained in a single assembly.

A vibrator cruise control automatically adjusts the machine’s vibrators to maintain consistent speed despite fluctuations in oil viscosity or changes in concrete slump.

For super-elevations and intersections, an exclusive crown-distance compensation feature provides automated crown transitions between the mold, DBI and OCB, according to the manufacturer.

As with other Power Pavers, the SF3404 is designed with simplicity in mind.

The machine features numerous other thoughtful details to simplify operators, finishers and mechanics’ jobs. It is equipped with Power Pavers’ signature SlipSmart control system for simple, highly configurable machine controls.

All machine diagnostics are onboard, with no laptop required. The new system provides fault codes for everything on the machine, including the DBI. Common bolt sizes and color-coded wiring throughout the machine keep maintenance simple.

For more information, call 704/6365871 or visit www.powercurbers.com. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 45

CT3000 TTaamping Roller

A true e high-sp peed tamping n roller % % %% %

)('(&%$#"%$!%$ % "" )( " '%&&$ $

% REYNOLDS-W REYNOLDS WARREN EQUIPMENT CO., INC. www.reynoldswarren.com Alta Equipment Company www.construction.altg.com Miami, FL (305) 477-2442

Orlando, FL (407) 850-9614

Davie, FL (954) 581-4744

Lake City, FL (386) 758-7444

Fort Myers, FL (239) 481-8554

Jacksonville, FL (904) 737-6000

H AVY HEA VY MACHINES INC www.HeavyMachinesInc.com w

1945 Forest Parkway Morrow, GA (404) 361-1593

B Birmingham, AL (2205) 323-6108

Memphis, TN (901) 260-2310

G Gray, TN 282 5462 (4423) 282-5462

Murfreesboro, TN (629) 335-3077 335 3077

180 Thunderbird Road Richmond Hill, GA (912) 445-2880

Taampa, FL T (813) 630-0077

dynapac.u us | 800-651-0033 Follow Dynapaac North America

% %

%

% % %

Page 46 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

American Concrete Pavement Association...

ACPA Holds Three-Day National Event: ‘Best Practices in Airfield Paving Workshop’ The American Concrete Pavement Association (ACPA) presented a three-day national event, Best Practices in Airfield Paving Workshop, Oct. 24 to 26 that included guidance for the design, construction and rehabilitation of concrete pavements used for airport applications.

Held in Denver, the three-day workshop program featured technical presentations by subject matter experts with practical experience in the topic areas.

Leading the discussions were experts from the U.S. Army Corps of Engineers’ Transportation System Center, the Federal Aviation Administration (FAA) Headquarters Office of Airport Safety and Standards, Air Force Civil Engineering Center, ACPA, and companies with direct involvement in the design and construction of FAA and Tri-Services projects.

Event Focuses Day one of the event focused on pavement design guidance and preconstruction activities; day two focused on construction techniques, quality control and specifications; and day three focused on construction planning and sustainability.

A popular element of ACPA’s airport pavement training program was open discussions about interpreting and apply-

ing airport concrete pavement specifications used by the FAA P–501 and Unified Facilities Guide Specification (UFGS) 32 13 14.13.

This group discussion serves as a guide for interpreting, gaining a better understanding and learning practical insights about the specifications.

Workshop Intentions The workshop was intended for owners’ representatives, design engineers, contractor personnel and others with an interest in concrete pavement design, construction and rehabilitation for airport applications.

Participants may earn up to 20 professional development hours for this training and technology transfer event. ACPA offers professional development hours with the assumption of their use in self-reporting states and provinces.

Reporting is done on an honor basis, and participants are responsible for maintaining their own records and for determining the applicability and acceptance with their respective licensing/certification organization.

Check with your licenses agency to confirm acceptance of this workshop for meeting PDH requirements. 

beardequipment.com 6870 Philips Highway Jacksonville, FL 32216 (904) 296-5000 2578 SE Baya Drive Lake City, FL 32025 (386) 752-9544 4539 NW 44th Avenue Ocala, FL 34482 (352) 732-4646 356 N. Hwy 17 Palatka, FL 32177 (386) 326-6268 3033 US Hwy 27 E. Perry, FL 32348 (850) 584-9200 7566 W. Tennessee St. Tallahassee, FL 32304 (850) 575-5600

www.reynoldswarren.com

FAE Expands Construction Line With RPL/EX Road Planer for Excavators On Sept. 28, FAE expanded its construction line with the RPL/EX road planer for excavators.

FAE’s new road planer for excavators is based on “cold planer” technology. With cold planer technology, the road’s surface is scraped and cut by the impact of special teeth attached to the rotor. The RPL/EX has a specially designed layout to increase performance and reduce vibration. With these features, the RPL/EX is the perfect tool to prepare roads for resurfacing or to simplify excavation operations.

The RPL/EX is compatible with excavators from 8 to 14 tons, can mill up to 5.3 in. deep, and has a working width of 18 in. The head comes standard with modern technological and structural features. These include an adjustable hydraulic base that allows you to manage the machine’s working depth with precision, a wide-stroke self-leveling system that allows you to keep the head properly aligned while in operation, and an adjustable right

skid that allows the operator to keep the head aligned in overlaps. It also has specially designed teeth specifically for use on asphalt and concrete road surfaces.

With this new range, FAE further

1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 (404) 361-1593 180 Thunderbird Drive Richmond Hill, GA 31324 (912) 445-2880

enhances its construction line, providing an alternative to professional customers looking for the technology and strength of an FAE product.

For more information, visit www.fae-group.com.  www.richmondmachinery.com 1701 Roseneath Rd. Richmond, VA 23230 (804) 359-4048

The RPL/EX, compatible with excavators from 8 to 14 tons, is able to mill up to 5.3 in. deep with a working width of 18 in.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 47

Come See Us At Booth #401

(844) 4 MY DOBBS www.dobbsequipment.com

www.tec1943.com 150 Piper Lane Alabaster, AL 35007 (205) 621-2489

243 South Jackson St. Grove Hill, AL 36451 (251) 275-4158

309 Hamric Drive West Oxford, AL 36203 (256) 831-2440

5336 Messer-Airport Hwy Birmingham, AL 35212 (205) 591-2131

108 Skylab Drive NW Huntsville, AL 35806 (256) 851-2222

3820 Greensboro Ave. Tuscaloosa, AL 35405 (205) 752-0621

800 Church St. N.E. Decatur, AL 35601 (256) 355-0305

2100 East I-65 Service Rd. North Mobile, AL 36617 (251) 457-8991

3305 Highway 77 Panama City, FL 32405 (850) 763-4654

4307 Reeves Street Highway 431 North Dothan, AL 36303 (334) 678-1832

3285 Selma Highway Montgomery, AL 36108 (334) 288-6580

9036 Pine Forest Rd. Pensacola, FL 32534 (850) 505-0550

2730 Falkenburg Road HQ Riverview, FL 33578 (813) 620-1000 4343 Northwest 77th Ave Miami, FL 33166 (305) 592-5740 3933 Martin Luther King, Jr. Blvd West Palm Beach, FL 33404 (561) 848-6618 4333 North John Young Pkwy Orlando, FL 32804 (407) 299-1212 3005 Hanson Street Fort Myers, FL 33916 (239) 334-3627 4618 Scarborough Drive Lutz, FL 33559 (813) 995-0841

1730 N. Nova Road Holly Hill, FL 32117 (407) 299-1212 1705 Columbia Lane Melbourne, FL 32904 (321) 234-3344 2710 Falkenburg Road Riverview, FL 33578 (813) 621-4902 - Parts 1751 Copans Road, Unit 8 Pompano Beach, FL 33064 (954) 977-9541 - Parts 6265 E Sawgrass Road Sarasota, FL 34240 (941) 960-2004 - Parts

Page 48 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

RICHMOND MACHINERY & EQUIPMENT www.richmondmachinery.com Richmond, VA 804-359-4048 800-662-6485

800-239-2694 | COWIN.COM

STONE EQUIPMENT CO., INC. www.stoneequipmentco.com 7950 Pittman Avenue 4325 Northern Blvd.

15101 AL-20 5710 Riverview Road SE Pensacola, FL 32534 Montgomery, AL 36110 Madison, AL 35756 Atlanta, GA 30126 Boulevard 1797-A Fulton Springs (850)Rd 479-3004 (334) 262-6642 (256) 536-9390 (404) 696-7210 210 West Montgomery, AL 36108 35 Schillinger Road 2238 Pinson Valley Parkway North Mobile, AL 36608 Birmingham, AL 35217 844-786-6373 (251) 633-4020 (205) 841-6666 334-625-6585

Alabaster, 1800 Culver Road 1501 Highway 78 East AL 35007 Tuscaloosa, AL 35401 Oxford, AL844-786-6373 36203 (205) 848-4147 (256) 832-5053

A Workhorse To Depend On The Carlson CP100 II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100hp engine, an array of configurations and the class-leading EZCSS single slide screed, it’s time to see why the CP100 II has fast become the contractor’s choice for heavy-duty commercial paver platforms.

astecindustries.com

BUILT TO CONNECT

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 49

A WIRTGEN GROUP COMPANY

The right paver for every application

WORLD TESTED. CONTRACTOR APPROVED: As the global leader in paving technology, we‘ve seen just about everything there is to see. In every climate, every condition, every twist, turn and terrain. And we put that world of experience in your hands, so you can experience exceptional performance and results at every phase of the paving process.

www.wirtgen.com

WIRTGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · Telephone: (615) 501-0600

www.PowerEquipCo.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283

www.tec1943.com Birmingham, AL • 205/591-2131 Pensacola, FL • 850/505-0550 Alabaster, AL • 205/621-2489 Atlanta, GA • 404/366-0693 Anniston, AL • 256/831-2440 Albany, GA • 229/435-0982 Decatur, AL • 256/355-0305 Augusta, GA • 706/798-7777 Dothan, AL • 334/678-1832 Calhoun, GA • 706/879-6200 Huntsville, AL • 256/851-2222 Columbus, GA • 706/562-1801 Mobile, AL • 251/457-8991 Hoschton, GA • 706/654-9850 Montgomery, AL • 334/288-6580 Kennesaw, GA • 678/354-5533 Tuscaloosa, AL • 205/752-0621 Macon, GA • 478/745-6891 Panama City, FL • 850/763-4654 Savannah, GA • 912/330-7500

www.dobbsequipment.com Riverview, FL (HQ) • 813/620-1000 Melbourne, FL • 321/234-3344 Miami, FL • 305/592-5740 Andrews, SC • 843/221-4940 West Palm Beach, FL • 561/848-6618 Aynor, SC • 843/358-5688 Orlando, FL • 407/299-1212 Ladson, SC • 843/572-0400 Fort Myers, FL • 239/334-3627 Simpsonville, SC • 843/963-5835 Lutz, FL • 813/995-0841 Walterboro, SC • 843/539-1420 Daytona, FL • 407/299-1212 West Columbia, SC • 803/794-9340 Riverview, FL • 813/621-4902 Pompano Beach, FL • 954/977-9541 Sarasota, FL • 941/960-2004

beardequipment.com Jacksonville, FL • 904/296-5000 Lake City, FL • 386/752-9544 Ocala, FL • 352/732-4646 Palatka, FL • 386/325-6268 Perry, FL • 850/584-9200 Tallahassee, FL • 850/575-5600

Page 50 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

GOMACO Names Champions for All Courses of Its Golf Invitational #41 GOMACO from page 35

Girardeau, Mo. They won the Mapleton tournament with a score of 63, which was seven under par.

The Ida Grove tournament champion team members included Dennis Kloke of Croell Inc. of Waukon, Iowa; Marc Grote of IFP Motion Solutions, Cedar Rapids, Iowa; David Barthel of Faris Machinery, Commerce City, Colo.; and Josh Held of Fabick CAT, Fenton, Mo. They finished the Ida Grove tournament with a score of 57, which was 13 under par.

Winning the Holstein tournament were Clint Golay of Berry Tractor and Equipment Co., Topeka, Kan., Bob Newman of Road Machinery & Supplies Co., Bondurant, Iowa; Mike Milenkovich of Kiewit Corporation, Omaha, Neb.; and Zach Corrigan of GOMACO. They finished the Holstein tournament with a score of 62, which was eight under par.

The champion team from Schleswig included Al Meyerdirk of SunSource, Spirit Lake, Iowa; Tom Farr of GOMACO; Brandon Bates of Millstone Weber LLC, Centennial, Mo.; and Randy Cleland of Minnich Manufacturing, Mansfield, Ohio. They finished the Schleswig tournament with a score of 61, which was nine under par.

GOMACO Corporation (www.gomaco.com) is a world leader in concrete construction equipment with headquarters in Ida Grove, Iowa. GOMACO equipment will slipform concrete streets and highways, airport runways, curb and gutter, sidewalks and recreational trails, safety barrier, bridge parapet and irrigation canals. Support equipment includes

Blanchard Machinery blanchardMachinery.com/paving Columbia,SC 803-791-7100 Florence,SC 843-678-8520 Rock Hill,SC 803-324-9600 Simpsonville,SC 864-963-3645 Myrtle Beach,SC 843-399-2074 Summerville,SC 843-871-2000 Hilton Head,SC 843-784-6766

Kelly Tractor kellytractor.com

Putting champions from the 2023 GOMACO Invitational are Torey Koch (L) of Bierschbach Equipment & Supply Co. and Tom Farr of GOMACO.

grade trimmers, concrete placers, concrete placer/spreaders and texturing and curing machines. The company also offers equipment to finish flat slabs, bridges and slopes. GOMACO will consult on unique concrete paving applications and equipment needs. Products are offered through a worldwide distributor network for local sales, parts and service expertise.

For more information, visit gomaco.com.  (All photographs in this article are courtesy of GOMACO.)

The 2023 Contractors’ Shoot-Out champions (L-R) are Neil McFadden of Smith Paving & Excavating Inc.; Derek Dilger of Smith Paving & Excavating Inc.; and Neil Galloway of Island Slipforming.

Miami, FL 305-592-5360 Davie, FL 954-581-8181 West Palm Beach, FL 561-683-1231 Clewiston, FL 863-983-8177 Ft. Myers, FL 239-693-9233

Carolina Cat carolinacat.com Charlotte, NC 704-596-6700 Asheville, NC 828-251-2500 Greensboro, NC 336-294-5240 Hickory, NC 828-464-7045 Monroe, NC 704-292-1555 Boone, NC 828-268-9992

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 51

The work may be under your feet, but you’re looking ahead - to the next challenge and the next deadline. Your local Cat Dealer

Built to Exceed the Demands of the Commercial Paving Contractor

WE’RE RIGHT THERE WITH YOU Ring Power

Yancey Bros. Co.

ringpower.com St. Augustine, FL 904-737-7730 Brooksville, FL 352-796-4978 Daytona Beach, FL 386-947-3363 Gainesville, FL 352-371-9983 Jacksonville, FL 904-714-2600 Lake City, FL 386-755-3997 Lakeland, FL 863-606-0512

Ocala, FL 352-732-2800 Orlando, FL 407-855-6195 Palm Bay, FL 321-952-3001 Sarasota, FL 941-359-6000 Tallahassee, FL 850-562-2121 Tampa, FL 813-671-3700

Thompson Tractor Company

yanceybros.com

Austell, GA 800-282-1562 Albany, GA 800-768-2892 Augusta, GA 800-446-5131 Bloomingdale, GA 800-482-1144 Brunswick, GA 800-299-5010 Calhoun, GA 800-752-9804

Columbus, GA 800-633-5240 Dacula, GA 800-545-2945 Macon, GA 800-633-5180 McDonough, GA 888-926-2392 Savannah, GA 800-755-8382 Statesboro, GA 888-764-6506

thompsontractor.com

Valdosta, GA 800-755-6841 Washington, GA 888-678-3211 Waycross, GA 888-948-2443

Alabaster, AL 205-664-4833 Attalla, AL 256-570-1100 Tarrant, AL 205-841-8601 Crestview, FL 850-682-6510 Tanner, AL 256-353-7721 Dothan, AL 334-671-1040

Hanceville, AL 205-283-0128 Huntsville, AL 256-532-1776 Spanish Fort, AL 251-626-5100 Montgomery, AL 334-215-5000 Opelika, AL 334-749-3359 Oxford, AL 256-831-4104

Panama City, FL 850-785-4007 Pensacola, FL 850-471-6700 Thomasville, AL 334-636-0420 Tuscaloosa, AL 205-247-2800 Tuscumbia, AL 256-381-2771

Page 52 • November 1, 2023 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

BOMAG’s New Tandem Roller Brings Emissions-Free Compaction to Market

CAROLINAS Charlotte, NC 704-228-0455 Clayton-Raleigh, NC 886-629-3784 Grimesland, NC 252-752-1500 Lexington, NC 866-629-3784 Columbia, SC 888-865-1002 Conway-Myrtle Beach, SC 800-968-0754 Piedmont-Greenville, SC 864-434-1154 Summerville-Charleston, SC 843-501-0566

GEORGIA Richmond Hill-Savannah, GA 912-756-7854 Dallas-Atlanta, GA 770-445-9019 Douglas, GA 912-922-3232 Macon, GA 478-257-8300 www.nedealers.com

The new BW 100 AD e-5 features a low-voltage, 48V system with long-lasting 25 kWh Li-Ion batteries. The system requires no special safety precautions for maintenance, and the batteries offer plenty of capacity for a typical day’s work before recharging.

The new, compact BOMAG BW 100 AD e-5 electric tandem roller introduces sustainable, low-noise and zero-emissions operation to the 2.5-ton class commercial roller market.

With its 39.4-in. rolling width, this powerful all-arounder makes short work of parking lot, driveway, asphalt repair and soil compaction work. Impressively quiet, the new BOMAG roller is perfect for compacting in noise-sensitive areas such as nighttime jobs, inner city work and compacting around hospitals, the manufacturer said.

The new BW 100 AD e-5 features a low-voltage, 48V system with long-lasting 25 kWh Li-Ion batteries. The system requires no special safety precautions for maintenance, and the batteries offer plenty of capacity for a typical day’s work before recharging.

With its recuperative system, valuable energy is recovered during braking, converting mechanical energy back into electrical. The roller offers flexible plug and charging options to meet the customer’s needs.

The new tandem roller’s efficient e-PERFORMANCE system is equipped with two electric motors — one dedicated to travel and the other for steering and vibration. A 26.8hp (19,7 kW) electric motor propels the front and rear driven drums at working speeds of 0-3.1 mph and travel speeds reaching 6.2 mph.

When traveling, the roller only uses one motor to conserve energy consumption. The roller’s unique ECO function helps to further save battery power.

Affording enhanced visibility to the drum and drum edge,

the roller’s isolated platform reduces vibration feedback to the operator to improve comfort throughout the shift. With no warm-up necessary, the roller is quickly ready for work at the push of the ignition button, and its uncomplicated design allows operators of all experience levels to quickly pick up roller control, according to the manufacturer.

A digital 5-in. color display gives operators a quick glance of critical operating parameters, including speed, energy output, asphalt temperature, compaction progress, operating hours, battery charging capacity, duration and power. Available BOMAG TELEMATIC allows fleet managers to monitor roller location plus operating data from anywhere, at any time.

Similar to the diesel-powered BW 100 AD-5, the electric BW 100 AD e-5 flexibly allows for individual vibration control to both drums, and vibration actuation is conveniently controlled through the soft-response travel lever.

Tailoring compaction output to the job, the roller offers two vibration frequencies of 3,900 and 3,360 vpm (64 and 54 Hz) with a single amplitude of 0.20 in (0,50 mm), generating 7,194 and 5,395 lb. (32 and 24 kN) centrifugal force. Its intelligent vibration control (IVC) helps operators to know when compaction has been optimized to save on passes.

Featuring a pressurized water spray system with 54.2-gal. tank, the scraper bars are wind-protected to ensure uniform drum coverage in adverse weather conditions. Two scraper bars on each drum help to prevent material pick-up in both travel directions.

For more information, visit www.bomag.com/. 

www.stoneequipmentco.com Montgomery, AL 844/786-6373

taylorconstructionequipment.com Philadelphia, MS 601-650-9600 Richland, MS 601-922-4444

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 1, 2023 • Page 53

Reynolds-Warren Equipment Company

GSE - Great Southern Equipment Company

RJV Equipment

Hills Machinery

www.gsequipment.net

www.rjvequipment.com

www.hillsmachinery.com

www.reynoldswarren.com

1945 Forest Parkway Lake City, GA 30260 800/875-5659 404/361-1593 180 Thunderbird Drive Richmond Hill, GA 31324 800-875-5659 912-445-2880

Tampa, FL 866/586-8956

Tallahassee, FL 850/574-0892

Pompano Beach, FL 954/327-8808 Ft. Myers, FL 239/334-6063

Knoxville, TN 865/970-2840

Richmond, VA 804/964-1900

Raleigh NC 919/746-7938

North Charleston SC 843/225-9377

Orlando, FL 407/859-9160

Charlotte NC 704/208-5564

Greenville NC 252/752-7145

Greenville SC 864/546-5208

Jacksonville, FL 904/268-4400

Mills River (Asheville) NC 828/820-5265

Leland (Wilmington) NC 910/800-2070

Savannah, GA 866/830-7577

Greensboro NC 336/308-3045

Columbia SC 803/ 658-0200

Page 54 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 56 • November 1, 2023 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

see CHART page 60

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

68 (50) 68 (50) 68 (50) 92 (69) 92 (69) 92 (69) 112 (84) 112 (84) 112 (84) 127.4 (95) 127.4 (95) 127.4 (95) 150 (112) 150 (112) 150 (112) 214 (160) 214 (160) 214 (160) 214 (160)

16,839 (7,638) 15,803 (7,168) 16,405 (7,441) 20,666 (9,374) 20,679 (9,380) 20,040 (9,090) 23,250 (10,547) 22,750 (10,320) 21,980 (9,970) 32,637 (14,804) 32,174 (14,594) 31,134 (14,122) 39,557 (17,940) 38,657 (17,531) 37,756 (17,123) 48,773 (22,123) 46,891 (21,269) 45,414 (20,599) 44,563 (20,213)

FPT F5C F5HFL463D*G003 FPT F5C F5HFL463D*G003 FPT F5C F5HFL463D*G003 FPT F5HFL413J*A002 FPT F5HFL413J*A002 FPT F5HFL413J*A002 FPT F4HFE413P*A008 FPT F4HFE413P*A008 FPT F4HFE413P*A008 FPT F4HFE613F*A002 FPT F4HFE613F*A002 FPT F4HFE613F*A002 FPT F4HFE6132 FPT F4HFE6132 FPT F4HFE6132 FPT F4HFE613J FPT F4HFE613J FPT F4HFE613J FPT F4HFE613J

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

CASE

CATERPILLAR D1 D2 D3 D4 D5 D6 D6 XE D7 D8 D9 D10 D11 / D11 CD

MODEL

80 (59.7) 92 (68.6) 104 (77.6) 130 (96.9) 170 (126.8) 215 (160.3) 215 (160.3) 265 (197.6) 354 (264) 452 (337.1) 620 (462) 850 (634)

ENGINE POWER HP (KW)

17,855 (8,098.9) 18,382 (8,337.9) 20,640 (9,362.1) 29,259 (13,271.7) 42,263 (19,170.2) 50,733 (23,012.1) 51,333 (23,284.3) 65,644 (29,775.6) 87,600 (39,734.7) 110,225 (49,988) 154,888 (70,256) 229,800 (104,236)

Cat C3.6 Cat C3.6 Cat C3.6 Cat C4.4 Cat C7.1 Cat C9.3B Cat C9.3B Cat C9.3B Cat C15 Cat C18 Cat C27 Cat C32

WEIGHT LBS. (KG)

ENGINE TYPE

94 (70) 113 (84) 209 (156) 213 (159)

22,707 (10,300) 24,912 (11,300) 46,451 (21,070) 47,780 (21,670)

Cummins QSF 3.8 Cummins QSF 3.8 Cummins QSB 6.7 Cummins B6.7

213 (159)

47,480 (21,555)

Cummins B6.7

161 (120)

44,555 (20,210)

Cummins B6.7

94 (70) 113 (84) 206 (154) 206 (154) 206 (154) 206 (154) 206 (154) 206 (154) 213 (159) 213 (159) 213 (159) 213 (159) 213 (159) 161 (120)

22,046 (10,000) 24,251 (11,000) 45,767 (20,760) 45,857 (20,800) 46,098 (20,910) 46,188 (20,950) 47,211 (21,415) 46,611 (21,142) 45,660 (20,710) 45,705 (20,750) 45,990 (20,860) 46,035 (20,900) 47,530 (21,560) 43,030 (19,518)

Cummins QSF 3.8 Cummins QSB 3.3 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7

DRESSTA

650M LGP 650M LT 650M WT 750M LGP 750M WT 750M LT 850M LGP 850M WT 850M LT 1150M LGP 1150M WT 1150M LT 1650M LGP 1650M WT 1650M XLT 2050M LGP 2050M WT 2050M XLT 2050M LT

Crawler Dozers LGP TD-8S LGP TD-9S LGP TD-15R/Ex LGP New TD-15M Series-2 LGP (Straight) New TD-15M Series-2 LGP (6-way) TD-16N

Crawler Dozers Non LGP TD-8S LT TD-9S LT TD-15R/Ex (Semi-U) TD-15R/Ex (Angle) TD-15R/Ex LT (Semi-U) TD-15R/Ex LT (Angle) TD-15R/Ex WT (Semi-U) TD-15R/Ex WT (6-way PAT) TD-15 Series-2 (Semi-U) TD-15 Series-2 (Angle) TD-15 Series-2 LT (Semi-U) TD-15 Series-2 LT (Angle) TD-15 Series-2 WT (Semi-U) TD-16N

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

LIEBHERR Loaders LR 626 LR 636

150 (110) 184 (135)

36,288 - 42,681 ( 16,460 - 19,360) 47,818 - 50,809 (21,690 - 23,047)

D 924 A7 D 934 EVO

130 (97) 168 (125) 214 (160) 254 (190) 349 (260) 416 (310) 757 (565)

29,321 - 34,833 (13,300 - 15,800) 38,581 - 45,856 (17,500 - 20,800) 46,738 - 56,218 (21,200 - 25,500) 57,100 - 69,446 ( 25,900 - 31,500) 78,044 - 94,799 ( 35,400 - 43,000) 101,909 - 119,462 (46,225 - 54,187) 142,743 - 161,354 (71,800 - 73,189)

D924 A7 D 934 A7 D 934 EVO D 936 A7 D 946 A7 D 9508 A7 D 9512 A7

Dozers PR 716 PR 726 PR 736 PR 746 PR 756 PR 766 PR 776

MODEL

KOMATSU D37EX-24 D37PX-24 D39EX-24 D39EXi-24 D39PX-24 D39PXi-24 D51PX-24 D51EX-24 D51EXi-24 D51PXi-24 D61EX-24 D61EXi-24 D61PX-24 D61PXi-24 D65EX-18 D65WX-18 D65PX-18 D65EXi-18 D65PXi-18 D65EX-18 WH D65PX-18 WH D71EX-24 D71EXi-24 D71PX-24 D71PXi-24 D71PX-24 Wide D71PXi-24 Wide D85EX-18 D85PX-18 D85EXi-18 D85PXi-18 D85EX-18 WH D85PX-18 WH D155AX-8 D155PX-8 D155AXi-8 D155AX-8 WH D375A-8 D475A-8

WH: Waste Handler 89 (66) 89 (66) 105 (78) 105 (78) 105 (78) 105 (78) 131 (98) 131 (98) 131 (98) 131 (98) 168 (125) 168 (125) 168 (125) 168 (125) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 264 (197) 264 (197) 264 (197) 264 (197) 264 (197) 264 (197) 354 (264) 354 (264) 354 (264) 354 (264) 609 (455) 890 (664 )

19,842 (9,000) 20,503 (9,300) 21,891 (9,930) 22,068 (10,010) 22,817 (10,350) 22,950 (10,410) 31,438 (14,260) 30,821 (13,980) 30,380 (13,780) 31,438 (14,260) 40,830 (18,520) 41,094 (18,640) 42,902 (19,460) 43,167 (19,580) 46,892 (21,270) 50,618 (22,960) 50,331 (22,830) 46,892 (21,270) 50,331 (22,830) 50,259 (23,165) 53,136 (24,102) 49,824 (22,600) 50,045 (22,700) 50,927 (23,100) 51,147 (23,200) 52,690 (23,900) 52,911 (24,000) 67,615 (30,670) 64,600 (29,300) 68,350 (31,000) 65,460 (29,700) 70,718 (32,077) 69,860 (31,688) 89,300 (40,500) 92,820 (42,102) 90,610 (41,100) 94,421 (42,828) 163,340 (74,090) 254,200 (115,300)

Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D170E-7 Komatsu SAA12V140E-7

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • November 1, 2023 • Page 57

Harness the power of data to opptimize your joob site LINDER INDUSTRIAL MACHINERY www.linder.com Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570

North Carolina Asheville • 828/681-5172 Charlotte • 980/777-8345 Fayetteville • 910/483-3892 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031

South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 Myrtle Beach • 843/486-8090 North Charleston • 843/486-8080

"! ! ! ! ! ! ! ! ! ! !

Disccover more

POWER EQUIPMENT www.powerequipco.com Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283 Little Rock, AR • 501/823-4400 Springdale, AR • 479/927-1672

komatsu.com/smart-construction

TRACTOR & EQUIPMENT COMPANY www.tec1943.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Huntsville • 256/851-2222 Mobile • 251/457-8991 Montgomery • 334/288-6580 Tuscaloosa • 205/752-0621

Florida Panama City • 850/763-4654 Pensacola • 850/505-0550

Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500

Page 58 • November 1, 2023 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

DD130 Dozer Provides Productivity in Fine-Grading Applications The DD130 dozer is a new addition to the current DEVELON dozer lineup. The DD130 dozer will offer a productive fine-grading solution for residential and light commercial construction.

DEVELON, formerly Doosan construction equipment, entered the North American dozer market in 2022 with a smaller dozer size, the DD100, competing in the 140-hp and under category in 2022. After much anticipation from dealers and customers, the first DD100 dozers made their way to dealerships and eventually customer jobsites in Q3 2022.

“The new DD130 dozer will build on the success of the DD100 with many of the same popular features,” said Moo Young Park, engineering manager at DEVELON. “The feedback from our dealers and customers after the launch of the DD100 was very positive, and we hope to continue the momentum with the larger DD130 dozer for the North American construction industry.”

Productivity The DD130 dozer delivers more horsepower, better tractive effort and superior pushing power to help operators move more material and get more in the done pile.

Productivity is driven by the dozer’s 6-way variable angle pitch blade. Customers can choose from two blade options: a standard 4.6 cu. yd. blade or an optional 5.5 cu. yd. capacity blade. The blade moves freely to lift, tilt and angle, and 2way mechanical adjustments can change the blade pitch to control how steeply the blade will dig into the ground.

Operators can adjust the blade pitch from 52 to 58 degrees.

Also available is a blade shake button for operators to quickly remove materials stuck to the blade.

Doosan dozers come standard with piping for an optional ripper attachment. The ripper attachment features parallel linkage that helps maintain a constant angle to the ground regardless of the height. The attachment can quickly break up hard, rugged materials prior to grading, and it can be used to install erosion control. Also available as an attachment is a towing draw bar, allowing operators to use the dozer to tow other equipment on a jobsite.

At ConExpo 2023, the new DD130 dozer will be displayed with optional forestry guarding. The option includes a front sweep and roof guard designed for forestry and logging applications. This is a preview of the accessory, which will eventually be available for the DD100 and DD130 dozers in North America.

The DD130 dozer

Visibility One of the biggest differences between the DD130 dozer and other brands is the visibility to the machine’s blade. The front engine compartment offers a narrower design to make it easier for operators to see their work.

The precleaner is tucked away in the engine compartment to maximize front visibility.

The electronic cooling system was moved to the back of the dozer to further improve front visibility.

The cab’s low-profile front pillars provide maximum glass area.

All-glass doors provide a full view of the working environment.

For further visibility and safety, a standard rearview camera provides operators with an additional view of the dozer’s surroundings. The full-color, 8-inch Smart Touch display shows the rearview camera view. Also standard are high-illumination LED lights and four premium wiper blades.

Technology Advanced technologies in the DD130 dozer deliver more precision to help operators meet exacting specifications. A 2D grading system option is available to make precision grading easier, even for novice operators.

Serviceability The DD130 comes standard with an electronically operated tilting cab that provides access to internal components.

Even with the cab tilted, the dozer can be started while the machine is being diagnosed or repaired.

An in-line precleaner, which comes standard, helps improve filter life and is integrated with the air cleaner. It’s also more compact to fit in the smaller engine compartment.

Self-cleaning and maintenance-free, the intake system can expel a variety of debris, including mud, snow, leaves, sawdust and chaff.

The dozer undercarriage is designed for convenience and cost-effective maintenance. Areas of the undercarriage that naturally experience greater wear and tear are easy to access.

For example, a removable side panel provides access to an area to add grease to the undercarriage’s tension system.

Customers can order replacement parts through their local dealer.

A telematics system is a standard feature on the DD130 dozer, making it easy for customers to remotely monitor and maintain their machine. They can monitor the health, location and productivity of the dozer from a user-friendly mobile app and website. The customer’s dealer can also see the equipment status and notify them when it’s time for service to minimize machine downtime.

DD130 Dozer Specs* • Horsepower (gross): 156.9 hp (117 kW) • Operating weight: 33,730 lb.

(15,300 kg) • Blade height: 43.9 in. (1,115 mm) • Blade width: 143.9 in. (3,655 mm) • Blade angle: 25 degrees • Drawbar pull: 48,500 lb. (21,999 kg) • Tumbler distance**: 8 ft. 11 in. (2,720 mm) • Travel speed, max: 5.6 mph (9 km/h) • Dozer cabin is ROPS/FOPS certified *Specifications represent the DD130 with LGP track. **Tumbler distance is from idler center to motor center. 

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • November 1, 2023 • Page 59

Page 60 • November 1, 2023 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

All Makes Undercarriage Parts Also Carry Bucket Teeth and Cutting Edges Call For a

Caterpillar® John Deere® Komatsu® Case® Hitachi® Liebherr® Volvo® Kobelco® Kubota® Bobcat® Takeuchi®

FREE ESTIMATE!

Tractor Tracs Inc. Undercarriage Specialists 5505 Caterpillar Drive, Apex, NC 27539

919-387-1050 • 888-526-9740 • www.tractortracs.com

CHART from page 56

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

115 (86) 145.8 (108.7)

24,692 (11,200) 31,747 (14,446)

DEVELON G2 DM03 Perkins 1204J

155 (116) 155 (116) 194 (145) 194 (145)

40,614 (18,422) 42,120 (19,104) 45,178 (20,492) 50,675 (22,985)

John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068

71 (53) 92 (69) 104 (78) 104 (78) 135 (101) 135 (101) 175 (131) 175 (131) 225 (168) 225 (168) 225 (168) 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 265 (198) 350 (261) 350 (261)

17,816–19,035 (8,081–8,634) 18,853–20,115 (8,552–9,124) 21,165–22,484 (9,600–10,198) 21,320–22,343 (9,691–10,156) 30,900–32,088 (14,016–14,555) 30,900–32,088 (14,016–14,555) 37,569–40,040 (17,041–18,162) 37,569–40,040 (17,041–18,162) 47,578–51,356 (21,581–23,295) 47,578–51,356 (21,581–23,295) 54,086–54,353 (24,533–24,654) 65,300–73,700 (29,606–33,431) 65,300–73,700 (29,606–33,431) 71,250–75,150 (32,325–34,100) 95,400–96,100 (43,270–43,590) 102,700–103,300 (46,600–46,850)

John Deere PowerTech EWX 4045 John Deere PowerTech PWS 4045 John Deere PowerTech PWS 4045 John Deere PowerTech PWS 4045 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6135 John Deere PowerTech PSS 6135

DEVELON DD100 DD130

JOHN DEERE Loaders 655K 655K Waste Handler 755K 755K Waste Handler

Dozers 450 P-Tier 550 P-Tier 650 P-Tier 650K SmartGrade 700L 700L SmartGrade 750L 750L SmartGrade 850L 850L SmartGrade 850L Waste Handler 950K 950K SmartGrade 950K Waste Handler 1050K 1050K Waste Handler

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • November 1, 2023 • Page 61

JohnDeere.com/Dozers

SMOOTH THINGS OUT. Your work involves more than moving material. You need to stay on top of jobsite productivity.

Our new 450 P-Tier, 550 P-Tier, and 650 P-Tier Dozers can put you in charge of the challenges.

Precise hydraulics, nimble machine stability, a comfortable cab with advanced displays and expansive jobsite visibility, simplified service, and flexible grade-control solutions including fully integrated SmartGrade™ help you keep things running smoothly and on schedule.

Beard Equipment Company

Dobbs Equipment

www.beardequipment.com

www.dobbsequipment.com

Mobile, AL 251/456-1993 Freeport, FL 850/835-3337 Jacksonville, FL 904/296-5000 Lake City, FL 386/752-9544 Ocala, FL 352/732-4646

Palatka, FL 386/325-6268 Panama City, FL 850/769-4844 Pensacola, FL 850/476-0277 Perry, FL 850/584-9200 Tallahassee, FL 850/575-5600

Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Riverview, FL (HQ) 813/620-1000 Miami, FL 305/592-5740 West Palm Beach, FL 561/848-6618 Orlando, FL 407/299-1212 Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841

Daytona, FL 407/299-1212 Riverview, FL 813/621-4902 Pompano Beach, FL 954/977-9541 Sarasota, FL 941/960-2004 Melbourne, FL 321-234-3344 Adairsville, GA 770/773-9857 Albany, GA 229/888-1212 Atlanta, GA 404/691-9445

Braselton, GA 770/965-1889 Brunswick, GA 912/264-6161 Columbus, GA 706/687-3344 Grovetown, GA 706/855-5440 Macon, GA 478/788-1586 Savannah, GA 912/964-7370 Valdosta, GA 229/474-6680 Andrews, SC 843/221-4940

Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Simpsonville, SC 864/963-5835 Walterboro, SC 843/539-1420 West Columbia, SC 803/794-9340

Page 62 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Dealers Gather at IEDA’s Mid-Year Event in Colorado The Independent Equipment “If the dealer doesn’t offer what given a total of seven $5,000 scholDealers Association (IEDA) cares you believe to be a reasonable cure arships to future mechanics,” he passionately for the used equipor if you feel the machine was went on. “And that’s not the end of ment industry. intentionally misrepresented, you it. We stay in touch with them and The national association strinhave the option to file a formal if they need tools when they start gently vets its members, offers complaint to the IEDA board,” he their new position, we will try to guidance for best business pracadded. “The board will review the help them with that.” tices, provides scholarships to complaint and, after discussions When James Rinehart of aspiring diesel technicians, espouswith both parties, will recommend Performance Equipment served as es ethical business practices and what they feel is a reasonable cure. president of IEDA, Gordon much more as it works to promote In the event the dealer member remembers, “he had a vision to the business of buying, renting and does not comply with the board give back. He would take equipselling heavy equipment. recommendation, then that dealer ment to Haiti, Honduras as well as All of this was on display as the Al Niece (R), president of Niece Equipment and current IEDA is removed from membership.”

Uganda to help build roads while organization held its annual mid- board member, and Niece Sales Manager Richard Antoine before on vacation. He remains a very year event at the Omni Interlocken the second night’s event.

Giving Back active and generous member of the Hotel in Broomfield, Colo., on When the idea of a group.

Sept. 5-7. membership funded schol“Also, Al Niece has con“accumulate cash and use Member dealers were engaged debt sparingly” as a hedge arship program was float- tributed strongly to our foundaby presentations on sales, legal against the ebbs and flows ed, the group responded tion, both financially and with his issues and asset protection strate- to which the industry is generously, according to time,” he added. “He’s the first gies from leading industry profes- often subject.

Gordon. one at a board meeting, just like sionals. Each presentation was “Rick Newman [presi- he’s the first one up in the morndesigned to strengthen the dealer dent of Newman Tractor] ing. He has amazing energy and High Standards while protecting the buyer, accordwas a major force,” uses it to the benefit of the organThe presenters’ focus on ing to Dave Gordon, IEDA execu- taking care of the customer Gordon said. “The first ization. tive director. year [2021] we were going Gordon said membership of the were echoed by IEDA Sales Trainer Elliot Vigil shared Board Member Jeff Miller, Education is at the center of most IEDA to give two $5,000 scholar- organization stands at 220 memMembers heard presentations on legal ships to young people bers — 21 of which are new in his insights on setting goals and president of Trophy Tractor events. and insurance issues facing the industry, increasing sales that were devel- in Fort Worth. along with information on effective sales wanting to pursue diesel 2023. oped over a 20-year career at mechanics as a trade. We “These are great human beings “Each and every mem- techniques.

Ahern Rentals, where he averaged ber of the IEDA is vetted selected the two recipients, (salt of the earth type of people) more than $1 million in monthly by the board,” he said. and then Rick felt so that have worked hard for everyrental revenue and 120 units sold “Many companies apply, strongly about a third per- thing they have,” he said. “They yearly over a five-year period. but are refused for any son that he gave the full love the equipment industry, helpVigil encouraged members to number of reasons. When $5,000 for a third scholar- ing each other, and helping their focus on what was right for their dealing with an IEDA ship. At the time we were customers.” customer who “were often making member, you are assured not even a 501C3, so there one of the most significant invest- that you are dealing with a was no tax benefit. Rick About IEDA ments of his life.” told us if we wanted to The Independent Equipment reputable company and Jayme Bates of the J.T. Bates your money will not disapbecome a 501C3, he’d Dealers Association is a non-profit Insurance Group spoke at length pear. You are assured that fund that as well. In total, trade association promoting particabout protecting the dealer’s the machine was described he gave more than $30,000 ipation, professionalism and assets, both in the yard and on the accurately and in the event that year alone. advancement in the independent job site. Bates said proper coverage there is a problem that the After a full day of meetings, members gath“It would not have hap- distribution of heavy equipment. benefited the renter as much as the dealer doesn’t simply walk ered for dinner in Boulder. (L-R): Jared Koch, pened without Rick The IEDA focuses its efforts on dealer, relaying a story about a away.”

Currency; Guy Roof, Con-Equip LLC; Rodney Newman,” Gordon con- providing discounts, marketing, small startup company needing to advertising, education and netMiller said the group Johnson, RJB Hydraulic Hammers; and Russ cluded. pay for more than $50,000 in dam- self-regulates its members. Dolezal, FR8STAR. “At this point, we have working opportunities to members ages to a machine because that will result in increased they did not understand the sales for member compacoverage the dealer mainnies. Members of the IEDA tained. Bates explained that are committed to displaying while it may have been devleadership in the industry by asting to the customer, it was making ethical decisions and not good for the renting dealsound judgement, by maker, either. ing accurate claims to cusJames Waite, a well tomers and by utilizing the known corporate and transproducts and services actional attorney with more offered to them by Associate than 25 years of experience (L-R): IEDA members Ryan Cunningham, Laurel Members.  in the construction industry, Machinery LLC; Mike Rooney, Performance Equipment Networking is a big part of IEDA’s annual events. As (All photographs in this Griff Bell, GTM Sales Inc.; Chris Lohman, South one member put it, “If I don’t have a piece of equipoffered guidance on rental Rental;, article are Copyright 2023 Mountain Tractor; and Daniel Brannon, Warren Cat, ment, someone else in this room does.” The opening and lease contracts while enjoy the opening night reception at the organization’s night dinner provided an opportunity for members to Construction Equipment encouraging dealers to mid-year event in Colorado.

Guide. All Rights Reserved.) share ideas and “talk shop.”

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 63

Authorized Bobcat Dealers

FLORIDA

BO B CAT.C O M

Bobcat of Palm Beach West Palm Beach 561-689-9880 www.sbequipment.com Bobcat of Broward Pompano Beach 954-763-9880 www.sbequipment.com Bobcat of Treasure Coast Fort Pierce 772-460-9998 www.sbequipment.com

GEORGIA

Bobcat of Savannah Bloomingdale 912-236-5588 www.gatewaydealer.com

NORTH CAROLINA Bobcat of Asheville Arden 828-684-4403 www.gatewaydealer.com R.S. Braswell Company Kannapolis 704-933-2269 www.rsbraswell.com Bobcat of Charlotte Charlotte 704-343-9000 www.bobcatofcharlotte.com Bobcat of Monroe Monroe 704-289-2200 www.bobcatofmonroe.com Triangle Equipment Co., Inc. Morrisville 919-781-7910 www.triangleequipmentgroup.com

WHEN THE TOUGH GET GOING,

YOU LEAD THE WAY WAY.

Bobcat of Johnston County Garner 919-661-1833 www.triangleequipmentgroup.com Bobcat of Wilmington Wilmington 910-395-2050 www.triangleequipmentgroup.com Bobcat of Wilson Wilson 252-206-0733 www.whitesequipmentco.com Bobcat of New Bern New Bern 252-636-1837 www.whitesequipmentco.com

Bobcat Company is a member of the Doosan Group. Doosan is a global leader in construction, grounds maintenance and material handling equipment, power and water solutions, and engineering that has proudly ser ved customers and communities for more than a centur y.

Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat C ompany in the United S tates and various other countries. ©2023 Bobcat C ompany. A ll rights reser ved. | 1517

TENNESSEE

SOUTH CAROLINA

Bobcat of Winterville Winterville 252-756-4055 www.whitesequipmentco.com

Bobcat of Clarksville Clarksville 931-436-9555 www.gatewaydealer.com

Bobcat of McMinnville McMinnville 931-488-4767 www.gatewaydealer.com

Bobcat of Charleston North Charleston 843-725-6330 www.gatewaydealer.com

Bobcat of Greenville Piedmont 864-269-3600 www.gatewaydealer.com

Bobcat of Myrtle Beach Myrtle Beach 843-236-4499 www.triangleequipmentgroup.com

Bobcat of Jacksonville Jacksonville 910-347-1646 www.whitesequipmentco.com

Bobcat of Nashville La Vergne 615-941-4000 www.gatewaydealer.com

Bobcat of Maury County Columbia 931-981-9909 www.gatewaydealer.com

Bobcat of Columbia Columbia 803-933-9996 www.gatewaydealer.com

Bobcat of Spartanburg Spartanburg 864-342-9003 www.gatewaydealer.com

Bobcat of Rock Hill Rock Hill 803-670-2003 www.BobcatofRockHill.com

Page 64 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Scale Models for Sale Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar V-50D Lift Truck, 1:25 scale - $25

Caterpillar 12G Motor Grader, 1:50 scale - $75

Caterpillar 416 Silver Backhoe/Loader, 1:50 scale - $75

JCB 520 Telescopic Handler, 1:35 scale - $80

Caterpillar 224 Wheel Type Excavator, 1:50 scale - $95

Caterpillar 966F Wheel Loader, 1:50 scale - $100

Caterpillar M318 Wheel-Type Excavator, 1:50 scale - $115

Caterpillar 936 Wheel Loader, 1:50 scale - $75

Caterpillar IT28 Tool Carrier w/Attachments, 1:50 scale - $100

Caterpillar D10 Track-TypeTractor, 1:50 scale - $135

Case 580SR Backhoe/Loader, 1:50 scale - $165

Allis Chalmers Forty Five Grader, 1:50 scale - $110

Allis Chalmers TS-300 Cable Operated Scraper, 1:50 scale - $110

1918 Holt Manufacturing Delivery Truck (Later Caterpillar), $25

Link Belt 490X4 Excavator, 1:50 scale - $225

Link Belt D300 Articulated Dump Truck, 1:50 scale - $65

Shipping and Handling Included

Bmckeon Collectibles 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 65

RELIABLE AND READY TO WORK

RT-65 COMPACT TRACK LOADER Built with next-generation MAX-Series features and patented Posi-Track® technology, the RT-65 is a premium mid-size loader that features maximum power, comfort and serviceability—which leads to more productivity. Its turbocharged 67-horsepower Deutz TCD 2.2 T4-liter diesel engine produces 184.4 foot-pounds of torque that the drive motors transfer to ASV’s patented internal-drive sprockets. With ASV’s patented Posi-Track® undercarriage, this machine is built for digging and ground engagement work in construction, excavation, landscaping and snow-clearing applications. And with next-generation MAX-Series features, the RT-65 offers plenty of creature comforts that let operators work more comfortably for longer periods of time: more all-around space, improved ergonomics, an upgraded HVAC system for better circulation and defrosting, and an optional all-weather pressurized cab for a cleaner operator environment.

DISCOVER THE ASV LINE-UP OF TRACK LOADERS AND SKID STEERS AT

Heavy Machines Inc. www.heavymachinesinc.com

www.loadersource.com

Loader Source

CLM Equipment Co. Inc. www.clmequipment.com

www.briggsjcb.com

Murfreesboro, TN 629-335-3077

6953 Covington Hwy Lithonia, GA 30058 770-808-5500

3135 US Hwy 90 East Broussard, LA 70518 337-837-6693

8215 Palm River Road Tampa, FL 33619 813-605-7800

4851 E Napoleon Road Sulphur, LA 70663 337-625-5942

7551 Presidents Drive, Suite 104 Orlando, FL 32809 407-841-4202

2815 N Sam Houston Pkwy E Houston, TX 77032 281-598-2500

2525 Philips Highway Jacksonville, FL 32207 904-260-6105

Memphis, TN 901-260-2310 Birmingham, AL 205-323-6108 Mobile, AL 251-653-5955 Shreveport, LA 318-621-0854

Briggs JCB

2755 Marshall Drive Tifton, GA 31793 299-388-8120 © 2023 Yanmar Compact Equipment North America

Page 66 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE FOR YOUR MONEY

Volvo Construction Reports Stable Earnings in Q3 of 2023

Limited time offer

$1,299*

MECALAC AX1000-CEG-08/23 - Photo credits: Semaphore - Münchow Industriefotos No binding document

MONTHLY PAYMENT

Financing available with:

A PROGRAM BY DLL

*60 months Fair Market Value lease; 60 months factory warranty.

Subject to credit review and approval, and other terms and conditions.

All financing is in De Lage Landen Financial Services, Inc.’s sole discretion. Taxes, freight, setup and delivery charges could increase monthly payment.

MAKE YOUR MOVE TO MECALAC

WWW.MECALAC.COM

Greater Chattanooga, Tennessee 423-541-5900 www.kubotaofchattanooga.com

Florida 813-341-4646 www.cpequipment.com

The mobile Power Unit supports charging in remote locations of larger machines like the EC230 Electric excavator.

Growth in North America and stable sales in Europe have ensured steady earnings for Volvo CE in Q3, 2023, with signs of a softening towards the end of the quarter.

Service solutions are growing in profitability, with a rise in sales compared to the same period last year — demonstrating their increased significance and Volvo CE’s continued focus on digitalization.

In Q3, overall net sales amounted to SEK 24,296 M, a modest increase from SEK 24,238 M in the same quarter last year.

When adjusted for currency movements net sales decreased slightly by 4 percent, of which net sales of machines decreased by 5 percent, while service sales increased by 4 percent. Adjusted operating income amounted to SEK 3,733 M (SEK 3,773 M in 2022) corresponding to an adjusted operating margin of 15.4 percent.

Perform, Transform This third quarter saw the unveiling of the company’s first electric power unit for larger electric machines like the EC230 Electric excavator. Allowing for high power charging of electric machines in remote locations, where access to a stable grid connection is limited, the Power Unit is now working with a customer in Sweden. Volvo CE also expanded the availability of the EC230 Electric excavator to customers in additional key markets in Europe.

Meanwhile in North America, the company inaugurated a new innovation center to provide training for technicians in diesel and electric heavy equipment, machine control technology, connectivity and productivity services.

Melker Jernberg, head of Volvo CE, said, “We have performed well this quarter during a challenging economic environment

while continuing to drive the long term transformation towards more efficient and sustainable construction solutions.

Maintaining this solid performance is essential to help us also lead the way with our industry’s transformation.”

Market Development Ensuring stable earnings this quarter, the North American market grew by 10 percent in the year to date, supported by continued large infrastructure projects and strong commercial construction that offsets a weaker residential sector. While in Europe, the market slowed slightly, due to a weakening macroeconomic outlook and increasing interest rates, but still maintained a modest 4 percent growth.

The market in South America declined by 25 percent on the back of low investment levels in Brazil and low business confidence among customers. Meanwhile the Chinese market demand weakened substantially compared to last year with a drop of 40 percent, caused largely by a decrease in real estate investments. In other Asian markets, there has been an increase in demand in India, Japan and the Middle East, offset by a lower market in South Korea and Indonesia, resulting in a steady development rate of 3 percent.

During the quarter, global deliveries decreased by 21 percent due to a slowdown in Brazil and China as well as supply challenges in Europe, while net order intake also declined by 27 percent. This was largely driven by lower demand in China and cautiousness in Europe. North America, however, is providing some strength with a 33 percent increase in deliveries and a 196 percent increase in orders.

For more information, visit www.volvoce.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 67

ALL STAR EQUIPMENT RENTALS & SALES, INC. Serving Southwest Florida 11680 Metro Parkway Fort Myers, FL 33966 888-459-7147 www.allstareq.com

CCS Equipment Sales, LLC Raleigh, Durham, Chapel Hill 5428 Highway 96 Youngsville, NC 27596 919-556-9110 Fuquay-Holly SpringsSanford-Fayetteville 836 North Broad Street Angier, NC 27501 919-935-0505 5886 Ernest Taylor Road Ayden, NC 28513 252-712-1033 www.ccsequipment.com

All it takes for the challenges you face.

From the original compaction brand comes a full line of construction equipment designed to help you get the job done with efficiency, quality and comfort. Whether your challenge is to load, move or place material, compact soil and asphalt, or to provide light, heat, power or pumping on your job site, Wacker Neuson has the machines to get it done right. This includes zero-emission, battery-powered solutions to meet the demands of the construction environment today, as well as tomorrow.

Contact your local Wacker Neuson dealer today.

www.wackerneuson.com

Page 68 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Spence Field Hosts 45th Annual Sunbelt Ag Expo in Moultrie, Ga.

W

ith more than 1,000 exhibitors and 100,000 visitors, the 45th annual Sunbelt Ag Expo held from Oct. 17-19 at Spence Field in Moultrie, Ga., was a big success.

Picture-perfect weather for all three days made for an ideal environment for construction and ag equipment dealers, (L-R): Zander McKenzie, Ryan McKenzie and Bobby Crisp of Quality Equipment and Parts, Lake City, Fla., manufacturers and service providers from all over the and John DalBianco of Prinoth had the all-new Prinoth Southeast to showcase their products and services.  CEG T-Rex 300mt at the center of their display.

(All photographs in this article are Copyright 2023 Construction Equipment Guide. All Rights Reserved.)

(L-R): Jimmy Staton, Steven Mathis and Steve Ryals of Jeff Martin Auctioneers were busy promoting their farm and construction equipment auctioning services.

(L-R): FAE rolled in with a bunch of new product offerings and lots of representatives of FAE USA based in north Georgia, including John Winger, Giorgio Carera, Chad Florian, Randy Shavor, Corey Buckner, Tim Cicora and Benjamin Saenz.

The new Fat Truck 2.8P, a completely amphibious pickup truck, was showcased at the Supertrak display.

Dave Evans (L) of Supertrak, Punta Gorda, Fla., a Southeast dealer, and Amine Khimjee, vice president of sales and marketing of Fat Truck, Cowansville, Quebec, Canada, had lots of interested attendees ask about this vehicle.

Thunder Creek had a nice array of fuel and service trucks at the show and factory representatives, including Grady Carson (L) and Wes Watkins, were on hand to provide extensive demonstrations.

Kubota, a show Gold Sponsor and manufacturer of agricultural, construction and turf management machines and attachments, had virtually everything it sells on display at Sunbelt Ag.

Packing a tremendous array of SANY products into their exhibit (L-R) are John Aspinwall, Gwen Eckersen, Karen Harrod and Branden Smith of Perry Brothers Equipment Company, based in Americus, Ga.

(L-R): Regular annual exhibitors at the show, Blake Eavenson and Amelia Reynolds of Fecon, and the manufacturer’s local dealer representative, Jon Donnelly, Tractor & Equipment Co., Albany, Ga., had a unique mix of vegetation management mulchers and trimmers to show the attendees.

Combining the JCB ag and construction machines with a mobile lounge and many drawings and giveaways, the Briggs JCB booth was non-stop activity for threedays with lots of representatives turning out, including (L-R) Haley Throne of JCB and Alyssa Montero, Darius Prentice, John Hilberling, Chris Pendleton and Cory Lord of Briggs JCB.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 69

LINDER TURF & TRACTOR

RJV KUBOTA

BROOKS SALES, INC.

TYLER EQUIPMENT CO., INC.

CREEL TRACTOR CO.

MASON TRACTOR CO.

www.lindertt.com

www.rjvequipment.com

www.brookssales.com

www.tylerequipmentcompany.com

www.creeltractor.com

www.masontractorco.com

250 North Church Street Burlington, NC 27217 336-792-3412

Nashville 140 Charter Place LaVergne, TN 37086 615-793-7576

3144 Hwy 74 East Monroe, NC 28112 704-233-4242

2613 Main St. Conway, SC 29516 843-248-5294

3771 Palm Beach Blvd.

Fort Myers, FL 33916 239-694-2185

1050 Appalachian Hwy Blue Ridge, GA 30513 706-632-3777

1530 Middle River Loop Fayetteville, NC 28312 910-483-3692 1501 N. Memorial Drive Greenville, NC 27834 252-695-6200 5504 15th Street E Bradenton, FL 34203 941-755-5722 1689 Dividend Loop, Ste #1 Myrtle Beach, SC 29577 843-486-8090

Knoxville 3356 Rudy Street Knoxville, TN 37921 865-970-2840

McDonough, GA 30253 770-957-3370 Cumming, GA 30040 770-887-6119 Perry, GA 31069 478-987-1173 Norcross, GA 30071 770-582-0377 Villa Rica, GA 30180 678-952-2037

Page 70 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NCDOT’s U.S. 70 Project Is Largest Cellular Concrete Project On East Coast

ALABAMA

Stone Equipment Co., Inc. 1797-A Fulton Spring Rd. Alabaster, AL 35007 844-786-6373 210 West Blvd.

Montgomery, AL 36108 844-786-6373 www.stoneequipmentco.com

MISSISSIPPI

Taylor Construction Equipment 3637 N. Church Avenue Louisville, MS 39339 833-773-3421 103 Industrial Park Road Philadelphia, MS 39350 833-773-3421 www.taylorconstructionequipment.com

North Carolina DOT photo

Construction will cost $234 million, with the final price tag at $322 million.

TENNESSE

NCDOT from page 38

Less weight and less time means nearly 75 percent fewer truck trips carrying road building materials. A concrete batch plant on site also adds to convenience and eliminates more truck traffic, lessening the project’s carbon footprint even further.

“This will be the largest cellular concrete project on the East Coast,” said Johnson. “Its use is an innovative way to work with the highly compressible soils in this area. The cellular concrete will be produced onsite and deposited with hoses.”

While most road construction projects are done during the summer, the U.S. 70 work needed to be done carefully, considering the heavy beach traffic in the summer.

“This road is the only path to some of the beaches,” said Johnson. “We were required to maintain two lanes in each direction and were limited to what we could do during the weekends.

Contractors were limited to night work during that time.”

The next section, approximately 5 mi., also will be design build.

“Working with our team on U.S. 70 has been enjoyable,” said Johnson. “It is a memorable project that will make a difference in a lot of people’s lives.”  CEG

North Carolina DOT photo

One unique challenge is that the ground where the new lanes will go is exceptionally soft.

Taylor Construction Equipment 104 Brickmill Commercial Dr. Maryville, TN 37801 865-444-0883 132 Industrial Dr. White House, TN 37188 615-392-4803 www.taylorconstructionequipment.com

CAROLINAS

Charlotte, NC 704-228-0455 Clayton-Raleigh, NC 886-629-3784 Grimesland, NC 252-752-1500 Lexington, NC 866-629-3784 Columbia, SC 888-865-1002 Conway-Myrtle Beach, SC 800-968-0754 Piedmont-Greenville, SC 864-434-1154 Summerville-Charleston, SC 843-501-0566 www.nedealers.com

FLORIDA

Apopka-Orlando, FL 407-401-8956 Ft. Pierce, FL 772-212-4043 Tampa, FL 813-940-4405 www.nedealers.com

GEORGIA

Richmond Hill-Savannah, GA 912-756-7854 Dallas-Atlanta, GA 770-445-9019 Douglas, GA 912-922-3232 Macon, GA 478-257-8300 www.nedealers.com

North Carolina DOT photo

Contractors had to relocate stormwater and utilities from multiple communities. The construction team will be using these pipes for stormwater.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 71

THE DOER’S DREAM Loved for the features.

Trusted for the performance.

Hyundai wheel loaders have the power and performance — not to mention top-notch interiors, accurate onboard weighing system, unique bucket design for better load retention, clear sight lines, and handy tech — that make life on the jobsite easier. So you can do more without feeling like

See the Hyundai difference yourself at your local dealer or hceamericas.com.

Page 72 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tough to beat for performance, safety, comfort and of use. ea

Better? It’s something we all strive for. But to be better you must be efficient. Be productive. Be versatile. Be dependable. And you need equipment that supports you every step of the way, no matter how big or small the task. Because good enough is never good enough.

Check out our full line of JCB products at your local dealer or visit JCB.com today.

Company Wrench JCB

Low Country JCB

Deep South JCB

Briggs JCB

TriStar JCB

125 Wilsons Mills Rd. Extension Smithfield, NC 27577 855-562-3526

1008 E Hwy 80 Pooler, GA 31322 888-431-0130

6851 Greenwood Road Shreveport, LA 71119 318-621-9000

8215 Palm River Road Tampa, FL 33619 813-605-7800

1241 Salem Park Court Murfreesboro, TN 37129 615-809-3377

141 Brickyard Rd Lexington, SC 29072 866-262-4181 803-520-0032

www.lowcountryjcb.com

7551 Presidents Drive, Suite 104 Orlando, FL 32809 407-841-4202

www.tristarjcb.com

JCB of Chattanooga

340 Airport Road Jackson, MS 39208 601-939-9655

11301 Reames Rd. Charlotte, NC 28269 980-859-4680

1609 Church Rd Chattanooga, TN 37421 423-899-1219

1150 LeBlanc Road Port Allen, LA 70767 225-383-6117

www.companywrench.com

www.jcbofchattanooga.com

2525 Phillips Highway Jacksonville, FL 32207 904-260-6105 2755 Marshall Dr Tifton, GA 31793 229-388-8120 1www.briggsjcb.com

8489 West Oaklawn Road Biloxi, MS 39532 888-838-5485 www.deepsouthjcb.com

JCBNA

@JCBNA

JCBNORTHAMERICA

JCBNA

WesPro JCB 1501 Atlanta Industrial Drive Atlanta, GA 30331 678-402-6867 www.wesprojcb.com

www.jcb.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 73

CLM EQUIPMENT CO., INC. www.clmequipment.com Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Houston, TX • 281-598-2500

GSE GREAT SOUTHERN EQUIPMENT COMPANY www.gsequipment.com Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892 Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400

HEAVY MACHINES INC.

LINK-BELT MID ATLANTIC

HILLS MACHINERY

www.heavymachinesinc.com

www.link-beltmidatlantic.com

Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453 825 31st Street North Birmingham, AL 205-323-6108 • 844-344-8658

Ashland, VA • 866-955-6071 Chesapeake, VA • 800-342-3248

www.hillsmachinery.com Charlotte, NC • 704-208-5564 Mills River, NC • 828-820-5265 Greensboro, NC • 336-308-3045 Raleigh, NC • 919-746-7938 Greenville, NC • 252-752-7145 Leland, NC • 910-800-2070 Columbia, SC • 803-658-0200 North Charleston, SC • 843-225-9377 Greenville, SC • 864-546-5208 Savannah, GA • 866-830-7577 Ashland, VA • 804-964-1900 Wise, VA • 276-268-4601

Page 74 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Beard Equipment Company

Dobbs Equipment

beardequipment.com

www.dobbsequipment.com

Mobile, AL 36617 251/456-1993 Freeport, FL 32439 850/835-3337 Jacksonville, FL 32216 904/296-5000 Lake City, FL 32025 386/752-9544 Ocala, FL 34482 352/732-4646

Palatka, FL 32177 386/325-6268 Panama City, FL 32404 850/769-4844 Pensacola, FL 32534 850/476-0277 Perry, FL 32348 850/584-9200 Tallahassee, FL 32304 850/575-5600

Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Riverview, FL (HQ) 813/620-1000 Miami, FL 305/592-5740 West Palm Beach, FL 561/848-6618 Orlando, FL 407/299-1212 Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841

Daytona, FL 407/299-1212 Riverview, FL 813/621-4902 Pompano Beach, FL 954/977-9541 Sarasota, FL 941/960-2004 Melbourne, FL 321/234-3344 Adairsville, GA 770/773-9857 Albany, GA 229/888-1212 Atlanta, GA 404/691-9445

Braselton, GA 770/965-1889 Brunswick, GA 912/264-6161 Columbus, GA 706/687-3344 Grovetown, GA 706/855-5440 Macon, GA 478/788-1586 Savannah, GA 912/964-7370 Valdosta, GA 229/474-6680 Andrews, SC 843/221-4940

Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Simpsonville, SC 864/963-5835 Walterboro, SC 843/539-1420 West Columbia, SC 803/794-9340

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 75

Central Atlanta Tractor Sales, Inc.

Highway Equipment Company

4240 Martin Luther King Jr Drive SW Atlanta, GA 30336 770-819-6600

Roanoke Location 8071 Lee Highway Troutville, VA 24175 540-992-4150 www.highway-equipment.com

www.centralatlantatractor.com

Stone Equipment Co., Inc. 210 West Boulevard Montgomery, AL 36108 844-786-6373 334-625-6585

1797-A Fulton Springs Rd Alabaster, AL 35007 844-786-6373

www.stoneequipmentco.com

Taylor Construction Equipment 3690 N Church Avenue Louisville, MS 39339 662-773-3421 www.taylorbigred.com

Page 76 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 77

Alta Equipment Company

Power Equipment

www.altaequipment.com

www.powerequipco.com

CCS Equipment Sales, LLC

www.parmantractor.com 3570 Dickerson Pike • Nashville, TN 37207 615.685.7800

539 SW Arrowhead Terrace • Lake City, FL 32024 386.758.7444

3300 Dozer Lane • Knoxville, TN 37920 865.577.5563

Raleigh, Durham, Chapel Hill

8750 Philips Hwy • Jacksonville, FL 32256 904.737.6000

4295 Bonny Oaks Dr. • Chattanooga, TN 37406 423.894.1870

5428 Highway 96 • Youngsville, NC 27596 919.556.9110

8418 Palm River Road • Tampa, FL 33619 813.630.0077

1487 Rock Springs Rd. • Kingsport, TN 37664 423.349.6111

Fuquay-Holly Springs-Sanford-Fayetteville

9601 Boggy Creek Road • Orlando, FL 32824 407.850.9614

3050 Ferrell Park Cove • Memphis, TN 38116-3502 901.346.9800

5151 Martin Luther King Blvd. • Fort Myers, FL 33905 239.481.8554

1545 Highway 45 • Saltillo, MS 38866 662.869.0283

5210 Reese Road • Davie, FL 33314 954.581.4744

2801 W 65th Street • Little Rock, AR 72209 501-823-4400 781 E Randall Wobbe Lane • Springdale, AR 72764 479-927-1672

Parman Tractor & Equipment

www.ccsequipment.com

836 North Broad St. • Angier, NC 27501 919.935.0505 5886 Ernest Taylor Rd. • Ayden, NC 28513 252.712.1033

Atlantic Coastal Equipment Sales & Rentals www.acesalesandrentals.com

922 Longwood Drive • Richmond Hill, GA 31324 912.459.1155

Page 78 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Alta Equipment Company www.altaequipment.com Lake City, FL 386-758-7444 Jacksonville, FL 904-737-6000 Tampa, FL 813-630-0077 Orlando, FL 407-850-9614

WANT AN EASY WAY TO TACKLE MORE JOBS WITH ONE MACHINE?

Fort Myers, FL 239-481-8554 Davie, FL 954-581-4744

PROBLEM

Miami, FL 305-477-2442

SOLVED

CCS Equipment Sales, LLC www.ccsequipment.com Raleigh - Durham 5428 Highway 96 Youngsville, NC 27596 919-375-7129 877-469-3471

TORO® DINGO®

TX 1000 The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

SPECIAL APPLICATION BUCKETS FOR ALL EXTREME APPLICATIONS Hundreds in Stock - For all excavator models. attintl@loretel.net or call us & 218-863-6444 www.attachmentsintl.com 22 PK

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices!

Call Company Wrench for Sizes & Pricing 21-22 NS Call 866-294-6103

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $135 per ad, $60 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 20,033 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

TORO.COM ©2023 The Toro Company. All Rights Reserved.

Fuquay - Varina Angier, NC 919-935-0505 Greenville, NC Ayden, NC 28513 252-712-1033

Kobelco’s Ballweg Retiring After More Than 35 Years Kobelco Construction Machinery USA, a global crawler excavator and crawler crane manufacturer, announced the retirement of Greg Ballweg.

“It is with a mixture of sadness and admiration that we announce the retirement of a true Kobelco legend, Greg Ballweg,” the company said.

“For 35-plus years, Greg dedicated an unwavering passion and expertise to our Kobelco family. Greg was one of the cornerstones on which the Kobelco brand was built and he will be truly missed. We wish him nothing but the best on this next chapter in life, and he will always be considered part of Kobelco.”

For more information visit www.KOBELCO-USA.com. 

Greg Ballweg

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 79

Compact Equipment Built For More.

Our reputation was forged in the dirt. Tackling tough jobs in some of the most difficult locations is where Yanmar compact equipment excels. For more than 50 years our compact equipment has been helping hardworking men and women get more done with machines that are powerful, intelligent, easy to operate, and incredibly efficient.

DISCOVER YANMAR COMPACT EQUIPMENT AT YOUR LOCAL DEALER:

Heavymachinesllc.com

2231 Flint Dr. Ft. Myers, FL 33916 239-337-5900

428 Ocoee Apopka Road Ocoee, FL 34761 407-295-2020

825 31st Street North Birmingham, AL 35203 205-323-6108

1060 West Industrial Ave. Boynton Beach, FL 33426 561-742-7400

11550 Philips Hwy. Jacksonville, FL 32256 904-262-4400

6691 Mobile Highway Pensacola, FL 32526 850-944-8110

Now Open 314 Beltline Road NW Decatur, AL 35061 256-898-0550

2965 McEver Road Buford, GA 30518 470-238-5900

1320 Gresham Rd. Marietta, GA 30062 770-973-8811

65 Chandler Street Richmond Hill, GA 31324 912-238-1300

12785 44th St. North Clearwater, FL 33762 727-299-9207

7970 NW 64th St Miami, FL 33166 786-410-9680

7651 Theodore Dawes Road Theodore, AL 36582 251-653-5955

2115 N Thompson Lane Murfreesboro, TN 37129 629-335-3077 364 Bob Jobe Road Gray, TN 37615 423-282-5462

10110 Roberts Way Covington, GA 30014 770-788-0888

210 West Boulevard Montgomery, AL 36108 334-625-6585

2950 Pinson Valley Pkwy.

Birmingham, AL 35217 205-841-9895

3926 East Raines Road Memphis, TN 38118 901-260-2200

5200 Hollywood Avenue Shreveport, LA 71109 318-621-0854

VermeerSoutheast.com

www.stoneequipmentco.com

Coming Soon Knoxville, TN 37914 888-366-9028

VIEW OUR FULL LINE OF EXCAVATORS, TRACK LOADERS, WHEEL LOADERS AND TRACKED CARRIERS AT YANMARCE.COM © 2023 Yanmar Compact Equipment North America. YANMAR has a corporate policy of continuous product improvement and development; therefore data, specifications, and warranty are subject to change without any advance notice. There may be differences between the specifications and illustrations contained in this publication and the actual equipment. Equipment components produced by other manufacturers may be shown in photographs in this publication for the purpose of illustration only and is not intended as an endorsement of that particular equipment or its suitability. Inspect equipment before using it and be sure it is operating properly. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manual. Before operating a machine, read, understand, and follow all instructions of the manual and on the machine. YANMAR disclaims all representations, express or implied, or any liability from the use of this publication.

Page 80 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors!

Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): MANUFACTURER: JCB 540-170 TELEHANDLER, 2016 OR NEWER. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): MISCELLANEOUS CATERPILLAR ATTACHMENTS. LOOKING FOR RELIABLE IT COUPLER ATTACHMENTS AND JOHN DEERE 644K FORKS (JRB COUPLER) TO ENHANCE OUR CONSTRUCTION OPERATIONS. WE REQUIRE ITEMS TO BE IN GOOD, WELL-MAINTAINED CONDITION. THE MOST DESIRED ATTACHMENTS ARE SIDE DUMP BUCKETS (LEFT AND RIGHT), BROOM ATTACHMENT, EXTENDABLE BOOM ATTACHMENT FORKS. PHONE: 484-781-2958 OR EMAIL US AT JWALSH@ JAMESTOHARAINC.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS - NEED TO BUY CAT MOTOR GRADER 140G/H, 14G,14M. ALSO LOOKING FOR A KOMATSU WHEEL LOADER WA-600 AND WA-900.

EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 336 EXCAVATOR - MUST HAVE A HYDRAULIC QUICK COUPLER, AUXILIARY HYDRAULICS AND GPS EQUIPPED. UNIT SHOULD HAVE BETWEEN 4-6000 HOURS. EMAIL: AARONA@BLACKSTARACA.COM PHONE: 737-587-1936 –––––––––––––––––––––––––––––––– WANTED (NC); CLARK ECX 25 FORKLIFT. EMAIL: JBSSERVICES37@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D10N CRAWLER DOZER. PLS PRICE FOB OR CIF ALEXANDRIA PORT EGYPT. EMAIL: ELEKTESADCO@YAHOO.COM; PHONE: 00201005311220 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR OFFHIGHWAY TRUCKS - CAT MODLES 777C, 777D, 777F, 777G. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING FOR 980K-M / 924 K-M / 416 420 430 CD-E-F / 953 963 C-D-K / 580 590 MN EMAIL: FEEDBACK@GCESEQUIPMENT.COM PHONE: 657-456-2544 –––––––––––––––––––––––––––––––– WANTED (IL): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING FOR CAT - CASE 980K-M /924 K-M /416 420 430 C-D-E-F /953 963 C-D-K / 580 590 M-N. EMAIL: JANDWINS@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (TX): NEED CAT 988 USED WHEEL LOADER. IF AVAILABLE PLEASE CONTACT ASAP. EMAIL: NORTHHEAVYEQUIPMENTS@ GMAIL.COM; PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU WA-600, WA-500 AND WA-900 WHEEL LOADERS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): ALL MODELS EAGLE CRUSHERS / PULVERIZERS / SHEARS. ISO PORTABLE, PREFERABLY CLOSED CIRCUIT, IMPACT CRUSHERS. ALSO INTERESTED IN PORTABLE SCREENS EMAIL: GIVEBUYSELLTRADE@GMAIL.COM; PHONE: 512-822-8818 –––––––––––––––––––––––––––––––– WANTED (IL): A CUMMINS 5.9 TURBO CHARGED ENGINE FOR A CASE 1155E LOADER. EMAIL: KUBERSKIEXC@CHARTER.NET –––––––––––––––––––––––––––––––– WANTED: KOMATSU WA600-6 WHEEL LOADER & CAT 988. IF AVAILABLE, PLEASE LET ME KNOW. THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OK): CATERPILLAR D5N CRAWLER DOZER. EMAIL: JUNK4@ACEINVESTMENTS.COM; PHONE: 405-627-6246 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR MODEL 815 SOIL COMPACTOR. EMAIL: ANDREWL@BLACKSTARACA.COM; PHONE: 312-898-5355 –––––––––––––––––––––––––––––––– WANTED (MA): CATERPILLAR 308E2CR QC EXCAVATOR. EMAIL: KKNOPE@DEFELICECORP.COM –––––––––––––––––––––––––––––––– WANTED (IN): HYSTER H80FT FORKS EMAIL: YADAV.JYOTI178@GMAIL.COM PHONE: 09500208661 –––––––––––––––––––––––––––––––– WANTED (WA): BOMAG BW 172 PADFOOT COMPACTORS | LOOKING FOR PARTS, SPECIFICALLY DRIVE TRAIN, OR WHOLE MACHINE TO USE FOR PARTS. EMAIL: DYLAN@COLF.COM PHONE: 360-798-5847 –––––––––––––––––––––––––––––––– WANTED (MD): CATERPILLAR 140H MOTOR GRADER. NEED TO BUY CAT USED MOTOR GRADER: CAT 140G, CAT 140H, CAT 14H, AND CAT 14G. IF AVAILABLE PLEASE LET US KNOW. EMAIL: AHMED@IUKANDCO.COM. –––––––––––––––––––––––––––––––– WANTED (WI): JOHN DEERE 200C EXCAVATOR - WANT TO BUY 5000065000 POUND EXCAVATOR WITH HYDRAULIC THUMB UNDER 6000 HOURS, UNDER $90K, ANY MAKE. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 0092-333-123-4598 ––––––––––––––––––––––––––––––––

WANTED (US): ANY MANUFACTURER, ALL MODELS CRAWLER DOZERS LOOKING TO BUY JOHN DEERE 650KLGP WITH WINCH OR 550KLGP WITH WINCH, ENCL. CAB, UNDER 3500 HOURS, UNDERCARRIAGE NEAR NEW. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 450-346-8975 –––––––––––––––––––––––––––––––– WANTED (TX): ALL MODELS, CATERPILLAR BACKHOE LOADERS. WE ARE LOOKING FOR BACKHOES CASE 580 N/M/SM/SN AND CAT 416-420 F/E/D/C, WITH ANY HOURS & ANY CONDITION. EMAIL: JANDWINS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR MODEL 14H MOTOR GRADER. EMAIL: NORTHHEAVYEQUIPMENTS@ GMAIL.COM; PHONE: 2816945478 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU PC3000 EXCAVATOR – LOOKING FOR A KOMATSU PC3000 ENGINE. EMAIL: EQUIPMENTDESTINY@GMAIL.COM; PHONE: 832-244-1897 –––––––––––––––––––––––––––––––– WANTED (US): CLARK M371 SKID STEER LOADER EMAIL:ANDYGRANGER30@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): WANTED FOR A JCB RUBBER TIRE BACKHOE LOADER 214 – A QUICK DISCONNECT DETACHABLE ADAPTOR FOR A SET OF FORKS. CAN NEED REPAIR. EMAIL DEANDRS@VERIZON.NET OR CALL 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS ALLMAND BACKHOE LOADERS. EMAIL: SCRIBEDM@ZOOMINTERNET.NET –––––––––––––––––––––––––––––––– WANTED (US): VOLVO EC480DL EXCAVATOR EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (OK): INTERNATIONAL H100C WHEEL LOADER - I HAVE A 1978 GREEN ARMY HUFF MODEL#H100C WHEEL LOADER VIN#IH2073. LOOKING FOR A COMPLETE 6 CYLINDER TURBO DIESEL INTERNATIONAL ENGINE DT466.

EMAIL: CELMORE@RONSPBS.COM PHONE: 918-385-1623 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 340 EXCAVATORS - NEED TO LOCATE CAT EXCAVATORS 320, 330, 345, 365, 385, AND 390. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D BACKHOE LOADERS – WE ARE LOOKING TO BUY FOR THE FOLLOWING BACKHOES: CASE (580K, L, M, SK, SL) CAT (416, 420 C/D/E/F), DEERE (310E, G, SE) AND JCB (214 SERIES 3).

EMAIL: EQUIPMENTDESTINY@GMAIL.COM; PHONE: +1 832-244-1897 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR 12G WANTED (US): LOOKING FOR EITHER MOTOR GRADERS – N NEED TO BUY A A USED, OR NEW GRAPPLE BUCKET, USED CAT MOTOR GRADER 140G, 14G, DEMOLITION BUCKET, FORKS WITH GRAPPLE, OR A STANDARD GP BUCK12G, AND 14H. THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM ET TO FIT A NEW 2022 CAT 980-14A (OLD MODEL = 980-M) RUBBER TIRED –––––––––––––––––––––––––––––––– WHEEL LOADER. IT CAN EITHER BE WANTED (WORLDWIDE): VOLVO "DIRECT PIN" OR TO FIT A FUSION EXCAVATORS - LOOKING TO BUY COUPLER. OUR NEED IS IMMEDIATE. USED VOLVO 480DL EXCAVATORS. EMAIL:BSCHAAB@AMERICANDND.COM EMAIL: USEDEQUIPMENT PHONE: 716-984-7566 STRADINGLLC@GMAIL.COM; –––––––––––––––––––––––––––––––– PHONE: +1-281-694-5478 WANTED: CATERPILLAR M320 EXCA–––––––––––––––––––––––––––––––– VATOR. LOOKING FOR A MOBILE WANTED (US): HITACHI EXCAVATORS, EXCAVATOR CATERPILLAR M320D MODELS EX 400 AND EX 450.

SINGLE BOOM, IN WORKING CONDIEMAIL: AHMED@IUKANDCO.COM TION, FOR IMMEDIATE PURCHASE. –––––––––––––––––––––––––––––––– EMAIL: RENATO.NASCIMENTO@ WANTED (MI): WACKER NEUSON WL30 ELEBBRE.COM; WHEEL LOADERS - LOOKING FOR ANY PHONE: +5511994602266 WHEEL LOADERS IN MICHIGAN UNDER –––––––––––––––––––––––––––––––– 10,000 POUNDS & LESS THAN $15,000 WANTED (WORLDWIDE): CATERPILLAR EMAIL: CRAIGBERENS944@GMAIL.COM CAT D10N / D10R CRAWLER DOZER. PHONE: 616-813-3642 EMAIL: –––––––––––––––––––––––––––––––– USEDEQUIPMENTSOURCING@GMAIL.COM WANTED (US): LOOKING FOR MULITI- PHONE: 281-694-5478 PLE UNITS OF CATERPILLAR D7G –––––––––––––––––––––––––––––––– CRAWLER DOZERS IN GOOD WORKING WANTED (US): HITACHI EX400 EXCAVATOR – LOOKING FOR A USED CONDITION. HITACHI EXCAVATOR EX-400 & EX 450 EMAIL: ILYAS.MTCPK@GMAIL.COM; TO PURCHASE ASAP. (RUNNING OR PHONE: +923322489350 NON-RUNNING MACHINES).

–––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS EMAIL: IKCEQUIPMENTS@GMAIL.COM – NEED TO PURCHASE HITACHI EXCA- –––––––––––––––––––––––––––––––– VATOR EX-400, EX-450, AND EX 270. IF WANTED (TX): JOHN DEERE WHEEL ANY OF THEM AVAILABLE DO LET ME LOADERS – LOOKING FOR A JOHN DEERE 544K & 644K TO PURCHASE KNOW. THANKS IN ADVANCE. ASAP WITH HOURS 5000 OR LESS. EMAIL: EMAIL: NORTHHEAVYEQUIPMENTS NORTHHEAVYEQUIPMENTS@GMAIL.COM @GMAIL.COM; PHONE: 281-694-5478 PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200-E WANTED (US): HYUNDAI HL757-9A EXCAVATOR. WHEEL LOADER – LOOKING TO BUY EMAIL: IUKANDCO@GMAIL.COM; 2012-2013 WHEEL LOADER OF PHONE: +923331234598 APPROX. 200 HP (EX:HL757-9A)WITH –––––––––––––––––––––––––––––––– HOURS LESS THAN 6000.

WANTED (US): CATERPILLAR 926E EMAIL: BERTRANDLAZURE WHEEL LOADERS; LOOKING TO BUY @CHARETTETRANSPORT.COM; CAT 936, 926 & 916. IF ANY OF THEM PHONE: 1-450-691-5151 AVAILABLE, PLEASE LET ME KNOW. –––––––––––––––––––––––––––––––– THANKS. WANTED (NY): CASE 721F WHEEL EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM LOADER – LOOKING TO BUY 2012-2013 –––––––––––––––––––––––––––––––– WHEEL LOADER OF APPROX. 200 HP WANTED: INTERNATIONAL HAR(EX:CASE 721F)WITH HOURS LESS VESTER T4 CRAWLER TRACK CHAINS. THAN 6000.

NEED A GOOD SET OF TRACK CHAINS EMAIL: BERT@MEXUSCAN.COM; TO COMPLETE A 1960 IH T4 RESTORA- PHONE: 1-514-233-5151 –––––––––––––––––––––––––––––––– TION. THE SAME STYLE OF CHAINS WEAS USED ON IH T4, T5, TD5, T340 & WANTED (US): CATERPILLAR EXCAVATORS, ALL MODELS. LOOKING TO TD340 CRAWLERS. THEY HAVE A 6.00 PITCH. I CAN SUPPLY ORIGINAL PART PURCHASE ANY HEAVY EQUIPMENT LOGGING AGGREGATE TRUCKS IN NUMBERS. THANKS FOR ANY ASSISTHE USA TANCE. EMAIL:EQUIPMENTPRO22@GMAIL.COM EMAIL: FARMBOYKJ@HOTMAIL.COM PHONE: 570-423-7631 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED (AL): LOOKING TO PUR\WANTED (WORLDWIDE): DOOSAN CHASE CAT WHEEL LOADER 936, 950B, DX480 EXCAVATORS - WANTED TO 966F AND 980F FOR OUR INVENTORY. BUY USED DOOSAN EXCAVATORS IF YOU HAVE ANY OF THEM ARE DX480 - DX520 4000-5000HRS. AVAILABLE, PLEASE LET ME KNOW. EMAIL: AMERICAUSEDEQUIPMENT@ EMAIL: AHMED@IUKANDCO.COM; GMAIL.COM; PHONE: +923003695360 PHONE: +1-657-236-7399 –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED (US): HITACHI EX220 EXCAVATORS – WANT TO BUY USED HITACHI EXCAVATORS EX-220, EX-270, EX-400, AND EX450, ANY CONDITION. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI, JOHN DEERE, KOMATSU 300, 400, AND 450 SIZES EXCAVATORS. RUNNING OR NON-RUNNING EXC. EMAIL: USEDEQUIPMENTSOURCING@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX450 EXCAVATORS - LOOKING TO BUY OLD USED HITACHI EX 450 EXCAVATORS. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): LOOKING TO BUY HITACHI EXCAVATORS EX330LC-5, EX450LC-5, EX400LC AND JOHN DEERE 495D, 595D. EMAIL: INFO@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): KUBOTA B7300HSD TRACTOR W/ 60 INCH MOWER DECK. EMAIL: PRONCALLO@AOL.COM; PHONE: 845-225-7504 –––––––––––––––––––––––––––––––– WANTED (US): ACS INDUSTRIES – BUCKETS, ALL MODELS EMAIL: BEBOMOR2003@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU WA30-2 WHEEL LOADER - LOOKING TO BUY A REAR AXLE FOR A KOMATSU WA30-2. IF YOU HAVE A REAR AXLE PLEASE CONTACT ME @ 6I6/8I3/3642.

ALSO INTERESTED IN BUYING COMPLETE RUNNING KOMATSU LOADERS WA40 OR SMALLER. EMAIL:CRAIGBERENS944@GMAIL.COM PHONE: 6I6-813-3642 –––––––––––––––––––––––––––––––– MANUFACTURER: MEC 3391RT AERIAL LIFT - CONTROL BOX FOR A MEC 3391RT YEAR 2000 PART NO. 20783.

DOUBLE FUEL GAS/PROPANE. NO OUTRIGGER. EMAIL: TAVAKE08@ICLOUD.COM; PHONE: 415-748-8079 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS - NEED CATERPILLAR WHEEL LOADERS 950B, 950E, 966F, 966FII, 980F AND CATERPILAR MOTOR GRADERS 140G. EMAIL: NAQIB_KHAN73@YAHOO.COM; PHONE: +923333298751 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS - LOOKING TO BUY HITACHI EXCAVATORS EX270LC, EX330LC-5, EX450LC-5, EX400LC AND JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM; PHONE: +923332316587 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 81

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Online Oct. 24 – Nov. 3, 2023 For: Late Model Aggregate, Construction & Recycling Equipment • Ashtabula, OH Thurs., November 2, 2023 For: Late Model Aggregate, Construction & Recycling Equipment • Online November 3 - 14, 2023 For: Quarry, Aggregate, Construction Equipment & more • Hauppauge, NY Sat., November 4, 2023 For: Major Snow Removal Contractor Retirement • Lockport, NY Sat., November 11, 2023 For: Annual Niagara Frontier Sales Auction • Danvers, MA Sat., November 18, 2023 For: Contractor Retirement Auction

Coming Auctions

RTI AUCTIONS www.teitsworth.com 585-243-1563

• Online November 1 - 8, 2023 HESS AUCTIONEERS BIDADOO AUCTIONS MIDEAST EQUIPMENT AUCTIONS For: Fall Municipal Auction www.bidadoo.com www.hessauctioneers.net www.mideastequip.com 1-877-BIDADOO 866-511-2493 860-370-9993 STEFFES GROUP INC. • Online • Marietta, PA • Skippack, PA November 7, 2023 Fri., December 8, 2023 www.steffesgroup.com Sat., November 11, 2023 For: Truck, Trailer & Equipment • Online For: H&K End of Year Surplus, 701-237-9173 Auction November 14, 2023 Truck & Equipment Auction • Online December 6 - 13, 2023 HUNYADY AUCTION COMPANY BIG IRON AUCTIONS For: Colorado Consignment MIEDEMA ASSET www.hunyady.com www.bigiron.com Auction 800-233-6898 800-937-3558 MANAGEMENT GROUP www.1800lastbid.com • Virtual Live • Online • Online 616-538-0367 November 1, 2023 Wed., November 1, 2023 December 13 - 20, 2023 For: Complete Liquidation • Online • Online at Repocast.com For: Steffes Construction Estate November 8, 2023 Ends November 7, 2023 Auction For: Construction/Heavy Equipment & Snow Removal I.R.A.Y. AUCTION BRIGHT STAR AUCTIONS www.iraymn.com Auction www.brightstarauctions.com TAYLOR AUCTION 320-968-7230 574-825-0704 & REALTY, INC. • Online • Online www.taylorauction.com PURPLE WAVE AUCTION Wed., November 1, 2023 Wed., November 15, 2023 662-226-2080 www.purplewave.com For: Heavy Equipment, Semi, For: IronRing 866-608-9283 Truck, Trailer Consignment • Online • Middlefield, OH Auction Fri., November 24, 2023 • Online Wed., November 1, 2023 RITCHIE BROS. AUCTIONEERS For: Lake Erie Equipment Wed., November 1, 2023 For: Online Only Machinery www.rbauction.com Auction For: Ag Equipment Auction JEFF MARTIN Auction 402-421-3631 • Elkin, NC AUCTIONEERS, INC. • Online • Orlando, FL Mon., November 30, 2023 www.jeffmartinauctioneers.com Thurs., November 2, 2023 November 2 - 3, 2023 For: Appalachian Equipment 601-450-6200 VANTAGE AUCTIONS For: Truck & Trailer Auction Auction • Houston, TX • Kissimmee, FL www.vantageauctions.com November 7 - 9, 2023 • Online Wed., November 1, 2023 951-228-9040 Wed., November 8, 2023 • Tipton, CA For: Truck & Transportation DEANCO AUCTIONS November 9, 2023 Auction For: Vehicles & Equipment www.deancoauction.com • Lake Elsinore, CA MS: 601-656-9768 Auction • Los Angeles, CA • Loudon, NH Sat., November 11, 2023 November 16 - 17, 2023 AL: 334-693-2540 Sat., November 4, 2023 • Online For: Heavy Construction For: Northeast US Live & • Phoenix, AZ • Philadelphia, MS Thurs., November 9, 2023 Equipment & more Online Public Auction November 21, 2023 November 15 - 16, 2023 For: Construction Equipment For: Huge 2-Day Public • Odessa, TX Auction Auction Sat., November 4, 2023 AUCTIONS INTERNATIONAL WAUSAU ACTIONEERS For: West Texas Classic Car www.auctionsinternational.com www.wausauauctioneers.com Auction REBEL AUCTION CO., INC. 800-536-1401 DON SMOCK 800-432-1922 www.rebelauction.net • Glencoe, MN AUCTION CO., INC. • Online Tues., November 7, 2023 800-533-0673 www.dsa-auctions.com Oct. 25 – November 9, 2023 • Online For: Twin Express Truck & 765-778-9277 For: Online Auctions Closing Ends November 6, 2023 • Hazlehurst, GA Trailer Liquidation Auction Daily!

• Flemingsburg, KY Thurs., November 9, 2023 For: Slivicke & Sons Cement Thurs., November 9, 2023 • Edmond, OK For: Monthly Construction & Contractors Inc. For: Absolute Retirement Wed., November 8, 2023 BAR NONE AUCTION Farm Equipment Auction Auction – ASL Excavating, Inc. For: OK Construction & www.barnoneauction.com Transportation Auction 866-372-1700 YODER & FREY • Brooklyn, MS RES AUCTION SERVICES FREY & SONS, INC. • Online HEAVY EQUIPMENT AUCTIONS Sat., November 11, 2023 www.freyandsons.com Sat., November 11, 2023 www.RES.bid For: Fall Construction & www.yoderandfrey.com 419-455-3739 For: Sacramento Equipment 833-SOLD-RES Transportation Auction Auction 419-865-3990 • Archbold, OH • Wooster, OH • Online Fri., November 3, 2023 • Online • Kissimmee, FL Mon., November 13, 2023 Tues., November 14, 2023 For: Excess Equipment from Fri., November 17, 2023 Wed., November 1, 2023 For: Commercial Truck & Miller Bros. Fleet & other com- For: National Construction & For: Woodburn Equipment Trailer Consignment Auction panies Auction For: Heavy Equipment Auction Transportation Auction To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

Page 82 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Don Blanton watches the machine perform while his son, Josh, operates the Cat D5C LGP dozer. Both were pleased with the inspection and planned to bid on it.

(L-R) are David Lee of James River Equipment in Raleigh, N.C.; and Wendy and Jordan Tingen of DTI.

John Dunlap (L) of Dunlap Construction & Utility in Stanley, N.C., and David Ferrell of Omer Ferrell & Son in Cary, N.C., were hoping to pick up a good deal on the compaction machines.

Lloyd Meekins & Sons Conducts Auction for DTI

L

loyd Meekins & Sons held a successful one-owner auction for DTI on Oct. 10, 2023, in Apex, N.C.

All machines were well maintained and brought higher prices as a result. Bidders attended from 41 U.S. states and six countries.  CEG Komatsus and the other excavators were in job-ready (All photographs in this article are Copyright 2023 condition.

Construction Equipment Guide. All Rights Reserved.)

Keith Davenport (L) of Davenport Inc. in Plymouth, N.C., and Josh Payne of Payne Grading in Elgin, N.C., were interested in the excavators, especially this Komatsu.

The excavators were sold above the estimate.

Interested in the smaller excavators (L-R) are Daniel Dupon, Antonio Castro and Louise Dupon.

These well-maintained Komatsu excavators were sold to a contractor in Knoxville, Tenn.

Pamela and Colossi Byrd of Byrd’s Garage & Wrecker Service in Roanoke Rapids, N.C., attended the one-owner auction to buy this John Deere excavator.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 83

Business Calendar

Join AED and Get Involved!

With our growing network of companies and organizations working together to advance the success of the Equipment Distribution Industry.

For more information, contact AED at 650 E. Algonquin Road, Ste. 305, Schaumburg, IL 60173.

Phone: 630/574-0650 Email: help@aednet.org

ASSOCIATED GENERAL CONTRACTORS OF MINNESOTA (AGC OF MN) 20-Year CHASE Recognition Event To view our Business Calendar online, Date: November 8, 2023 go to www.constructionequipmentguide.com.

Place: Ames Center 12600 Nicollet Avenue ASSOCIATED GENERAL CONTRACTORS (AGC) Burnsville, Minnesota 55337 AGC Events Calendar: Join us to recognize the hard work that CHASE Contractors do to make All AGC Web-Eds are scheduled in Eastern Standard Time (EST). their jobsites the safest in Minnesota! The Construction Health and Conferences are scheduled using the local time zone where the Safety Excellence (CHASE) Program is celebrating its 20th year with a event takes place.

Advanced Management Program special event to honor the participant contractors whose stellar safety (Https://amp.agc.org/) records continue to lead the Minnesota construction industry!

Dates: Wednesday, November 1, 2023 (2:00 PM) – Friday, The CHASE Program began in 2003 as a partnership between December 1, 2023 (5:00 PM) Minnesota OSHA and AGC of Minnesota. Twenty years later, it is still Online, Virtual the longest-running partnership with MNOSHA. The program is Training/Professional Development designed to recognize AGC member contractors for their safety proASSOCIATED GENERAL CONTRACTORS OF AMERICA, INC. (AGC) grams and performance, while providing incentives for partnership.

Join us at Ames Center on November 8th to celebrate the achieveConstruction HR & Workforce Conference ments of these contractors in the past year.

Dates: November 6 – 8, 2023 Place: Hyatt Regency Atlanta For more information, contact AGC of MN: Phone: 651/632-8929 265 Peachtree Street, NE • Atlanta, GA 30303 Email: info@agcmn.org Phone: 404/577-1234 Description: Learn, Share & Solve your greatest HR & Workforce Associated General Contractors of America (AGC) Challenges! Connect with Construction HR and Workforce The Associated General Contractors of America (AGC) is the leading Development Leaders and take-home practical solutions to solve your industry’s greatest challenges. Join us for this year’s Construction HR association for the construction industry. AGC represents more than & Workforce Conference. This new education experience will feature 27,000 firms, including over 6,500 of America’s leading general keynote speakers focusing on the intersection of HR and Workforce contractors, and over 9,000 specialty-contracting firms. More than Development in the construction industry. The event will also feature 10,500 service providers and suppliers are also associated with networking opportunities, as well as optional Workforce Excursions AGC, all through a nationwide network of chapters. and HR Workshops. What You’ll Learn: AGC’s Construction HR & 2023 Highway, Transportation & Utility Infrastructure Construction Workforce Conference is the premier education and networking des- Conference tination for HR, Training, and Workforce Development professionals in Dates: November 8 – 9, 2023 the Construction Industry. For Workforce Professionals: Explore the Place: The Wigwam Resort latest Workforce Development efforts underway across the country 300 East Wigwam Boulevard and share your own success stories. For Training Professionals: Stay Litchfield Park, AZ 85340 up to date with the cutting-edge techniques being used in the world (844/239-1641) of training and development. For HR Professionals: Find out whether you are maintaining compliance with current employment laws and Description: AGC’s Highway, Transportation & Utility Infrastructure Construction best practices.

Register NOW for the 2023 Construction HR & Workforce Conference! Conference is the industry’s premier annual conference that focuses For more information on this Conference, contact the Associated on the most critical issues and topics facing the industry today and General Contractors of America, Inc. (AGC). in the future. Whether your goal is to know more about industry Phone: 703/548-3118 Fax: 703/842-8817 Email: info@agc.org trends, learn best practices, or prepare for upcoming technological advances that will transform the way you work – this is a conference ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) tailored for you.

Branch/Store Management Unparalleled Education & Networking Opportunities: Branch/Store Management Seminar From superintendents to executives, this year’s agenda provides our Dates: November 7 – 8, 2023 diverse attendees with a wealth of in-depth knowledge for you to Place: Hyatt Centric Buckhead Atlanta apply to your organization along plentiful opportunities to connect Atlanta, GA As the leader for your branch location, you are responsible for people, with other industry leaders. assets, business relationships and profitability. This seminar is For more information on this Conference and to learn more about designed to address all the skill sets, processes, techniques, and the AGC: time management skills needed to become a top performing branch Phone: 703/548-3118 Fax: 703/842-8817 Email: manager. info@agc.org This program will reset your perspective and provide you with ideas, suggestions, and tools to become an effective leader of people who TCI EXPO 2023 drive the mission of creating and keeping more customers while makTREE CARE INDUSTRY EXPO ing money doing it.

Attendees will also learn how to use new critical thinking techniques, Website: https://expo.tcia.org/ Dates: November 16 – 18, 2023 emotional intelligence and neuromarketing to drive performance.

Learn how to set better goals across departments, manage challeng- Place: America’s Center Convention Complex ing situations with team members and customers and assess the 701 Convention Plaza operational efficiency of your branch.

St. Louis, MO 63101 Content includes: (314/342-5020) Financial Responsibilities: Description: . Delivering an expected rate of return to the business owner TCI EXPO is not only the largest trade show and conference in the . Managing the assets of the organization . Protecting the organization’s data, including customer lists, cus- industry, but also the only show that gives you access to ALL the tomer purchase history and any data with financial value, especially vendors and the BEST education while SUPPORTING our industry! By purchasing a registration to TCI EXPO, you are supporting training, to a potential competitor . Establishing departmental goals and budgets professionalism, and safety. Our goal is to increase safety, and by . Choosing key performance indicators (KPIs) attending TCI EXPO you are directly contributing to bettering the Market Responsibilities industry. Get ready for a trade show experience like no other! This . Understanding all market opportunities is your chance to immerse yourself in maximum excitement, maxi. Establishing & growing all market positions mum knowledge, and the maximum thrill of the tree care industry. . Growing customer satisfaction and your customer base Don’t miss out on this exhilarating event that will leave you inspired, . Determining revenue potential motivated, and hungry for more! . Whole goods potential Welcome Reception – Gather with your closest tree-care friends! . Parts and service labor revenue potential (sponsored by Vermeer) . Determining market participation and closing success Happy Hour Networking – On the Trade Show Floor . Establishing market share goals People Responsibilities: Demo Dome – Larger-than-life Equipment Demos . Providing a clean, safe, productive, and fun work environment Main Stage Sessions – With exciting keynote speakers and live . Using emotional intelligence to become the boss that people want Podcast Event to work for We can’t wait to see you in St. Louis, the nation’s gateway to . Properly staffing your dealership Westward exploration, home of Blues music and a unique mix of . Attracting top talent Midwest and Southern culture. . Understanding generational differences For more information on this EXPO, contact: Tree Care Industry . Providing a path for growth Association, Inc. AED Cancellation Policy: Refunds are not permitted within 14 business days of the event unless Address: 670 N. Commercial Street, Suite #201, Manchester, NH a note is received detailing a medical emergency or other similar 03101 event.

Phone: 603/314-5380 Toll-Free: 800/733-2622

Events are subject to change, check websites for updates

HUGE 2-DA AY Y PU UBLIC AUC CTION HUGE 2-day Contractors Equipment, Farm Equipm ment & T Trruck Auction

Wednesday, y, Nov ov v.. 15th & Thurs., Nov ov v.. 16th 9:00am 1042 Holland A Avve (Hwy 19 S) • Philadelphia, Mississippi 39350

Phone: 601-656-9768

Fax: 601 1-656-0192

2020 Cat 320GC (2260 hrs)

(2) 2019-18 Kubota SVL95-2S

LIVE ONSITE O AND ON NLINE

www.deanc coauction.com 768 Fax: 601-656-0192 Phone: 601-656-97 1042 Holland Ave ((Hwyy 19 S)) • PO Box B 1248 • Philadelphia, p , Mississippi pp 39350 sold@deancoauction.com Auctioneers: Donnie W. Dean, MS Lic 733 & Wes Dean, MS Lic. 1322; MS Gallery Lic. 835F

Page 84 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 70 Participate In Liebherr’s Sales, Training Seminar LIEBHERR from page 34

“The value lies not only in the dissemination of knowledge, but also in the intangible magic of human interaction, sparking innovation and simply having a good time together.”

Classroom The first half of this event provided all participants with five in-depth classroom sessions held by the Liebherr product management team based in the USA and Europe.

Each session focused on a different earthmoving and material handling machine including crawler excavators, wheel loaders, dozers, material handlers and the TA 230 articulated dump truck. Each session was run by two product managers who specialized in the featured machine providing indepth knowledge to equip the distribution network participants with essential information about the equipment, thus enhancing their own sales forces.

Hands On At the quarry, the whole product range was featured during the hands-on sessions including crawler excavators, wheel loaders, dozers, material handlers and the TA 230 articulated dump truck. These hands-on ses-

sions allowed participants to utilize what they learned in the classroom and put their new field knowledge into practice with Liebherr certified product managers on-site to support. This training also serves as a great opportunity for Liebherr’s distribution network to get seat time in a wide variety of Liebherr machines.

This was the first in-depth training on the TA-230 where participants were able to get under the hood and behind the wheel with product experts on-site to explain the latest

Liebherr technology. The Liebherr Earthmoving and Material Handling Technology team look forward to expanding this product line within the next decade, the company said.

Network. Operate. Execute “This sales and product seminar plays a vital role in empowering our dealer sales force with the essential tools and knowledge required for successfully selling Liebherr equipment. The event serves as a catalyst for

Each station was equipped with multiple Liebherr machines, a digital display set up and tents for onlookers. Liebherr product managers as well as support staff manned each product station, served as operators and assisted participants as they took turns in the operator’s cab.

the product management team to consistently furnish informative resources, comprehensive support, and continuous training to the dealer sales channels,” said Nick Rogers, general manager, product management and sales support.

“We firmly believe that by developing a deeper comprehension of our product lines and their distinctive features, sales representatives will be better positioned to engage customers with confidence, presenting solutions that ensure optimal results.”

Throughout the event, each attendee was able to participate in industry networking opportunities with Liebherr staff as well as the rest of the distribution network. The team also held an on-site barbeque at the quarry with games and entertainment for participants to enjoy.

“Beyond the scope of training, the sales seminar fosters connections among dealerships nationwide, affording representatives the opportunity to network, exchange ideas and share effective solutions that have been employed to overcome challenges encountered in their daily operations,” noted Rogers.

For more information, visit www.liebherr.com. 

Euro Auctions Acquires Michener Purple Wave Partners With Allen Auctioneering in Canada Online Auction Firm Copart Euro Auctions, Europe’s leading unreserved heavy equipment auctioneer, with onsite and online bidding, under the brands Euro Auctions and Yoder & Frey, announced the acquisition of Michener Allen Auctioneering Limited, a leading Canadian industrial equipment and automotive auction company.

Michener Allen Auctioneering Limited was founded in 1971 and has more than 50 employees operating from three permanent auction sites in Edmonton and Calgary in Alberta and Winnipeg, Manitoba. Michener Allen has affiliates across Canada giving them the ability to cater to its national contracts and provides offsite one owner auction services for customers.

The company runs approximately 50 auctions a year, which includes seven major three-day showpiece auctions that are conducted on an unreserved basis.

The acquisition will significantly strengthen the existing North American operations that Euro Auctions has in the USA under the Yoder & Frey brand and

will enable Euro Auctions to gain a foothold in the Canadian Market with the successful and established Michener Allen auction house.

The leaders of Michener Allen, Ian and Wade Michener, will remain in the business and will continue to oversee operations and say “The Euro Auctions Group will further strengthen our focus on industrial and agricultural equipment markets in Canada and we look forward to benefitting from the truly global customer base of the Euro Auctions Group. This is just the start of the next chapter of the 52-year history of our company, and we look forward to working with the Euro Auctions team.”

Given the deep customer relationships and significant brand value associated with Michener Allen, Euro Auctions will retain the Michener Allen brand. Euro Auctions will use its global experience to further enhance the exceptional quality of auction service Michener Allen provides and the brands global exposure.

For more information, visit euroauctions.com and maauctions.com. 

Purple Wave announced a strategic investment and partnership with Copart Inc., a global leader in online auto auctions.

Founded in 2000, Purple Wave has been a trailblazer in the online equipment auction industry, specializing in the direct sale of construction, agriculture and fleet equipment through its no-reserve auction platform on purplewave.com.

Jeff Liaw, co-CEO of Copart, expressed his admiration for Purple Wave, recognizing its digital-first approach and robust community of sellers and buyers as differentiators in the industry.

“This collaboration allows us to leverage our collective expertise for the betterment of our respective marketplaces. Most importantly, it reflects our shared commitment to creating long-term value through excellence and innovation.”

Aaron McKee, CEO of Purple Wave, sees this partnership as a pivotal moment for the

“This collaboration allows us to leverage our collective expertise for the betterment of our respective marketplaces.”

Jeff Liaw Copart Inc.

company, as it strengthens both organizations.

“Copart’s involvement will support Purple Wave’s mission as they continue to be the easiest, most straightforward way to buy and sell equipment.”

For questions regarding the partnership, direct questions to Purple Wave’s Strategic Relations Manager, Emily Zutterman, emily.zutterman@purplewave.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 85

Page 86 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALTA EQUIPMENT COMPANY (TAMPA) ......................................13 ASCENDUM MACHINERY INC ........................................................2 ASTEC CARLSON PAVING PRODUCTS ......................................48 ASTEC ROADTEC ..........................................................................39 ASV ................................................................................................65 BARGAINS ......................................................................................78 BELL TRUCKS AMERICA INC ......................................................75 BERLON INDUSTRIES ..................................................................18 BOBCAT COMPANY ......................................................................63 BROOKS SALES INC ....................................................................30 CASE POWER & EQUIPMENT FLORIDA......................................23 CEG SCALE MODELS....................................................................64 CLEVELAND BROTHERS EQUIPMENT CO ............................16,17 COMPANY WRENCH ....................................................................26 CON-EQUIP LLC ............................................................................22 CONDUIT SEARCH GROUP ..........................................................76 CONSTRUCTION EQUIPMENT GUIDE ..............................54,80,85 CRUMPLER PLASTIC PIPE ..........................................................30 DEANCO AUCTION CO..................................................................83 DEVELON........................................................................................59 DOBBS EQUIPMENT........................................................................7 DYNAPAC ......................................................................................45 FAE USA INC ..................................................................................44 FLUID CONTROL SERVICES ........................................................22 GEHL ..............................................................................................18 GOMACO CORP ........................................................................40,41 GSE GREAT SOUTH EQUIPMENT COMPANY ..............................9 HEAVY MACHINES LLC ..................................................................3 HILLS MACHINERY COMPANY LLC ............................................88 HISTORICAL CONSTRUCTION EQUIPMENT ..............................28 HITACHI CONSTRUCTION MACHINERY ....................................73 HYUNDAI CONSTRUCTION EQUIPMENT ..............................70,71 JCB INC ..........................................................................................72 JFW EQUIPMENT INC....................................................................36 JJ SCHECKEL CORP ....................................................................14 JOHN DEERE..................................................................................61 JOHN DEERE SKID STEER ..........................................................74 KOMATSU AMERICA CORP ..........................................................57 KUBOTA SVL ..................................................................................69 LEEBOY ....................................................................................42,43 LINDER INDUSTRIAL MACHINERY CO ..........................................5 MACE EQUIPMENT COMPANY ....................................................28

MAULDIN PAVING PRODUCTS ....................................................37 MECALAC NORTH AMERICA LLC ................................................66 MOBRO MARINE INC ....................................................................27 MOROOKA USA..............................................................................15 MWI PUMPS....................................................................................18 NATIONAL ATTACHMENTS ..........................................................28 NATIONAL EQUIPMENT DEALERS (NED) ..................................28 NPK CONSTRUCTION EQUIPMENT INC......................................29 PINNACLE CENTRAL CO ..............................................................30 POWER EQUIPMENT CO ................................................................6 POWERSCREEN ............................................................................24 RICHMOND MACHINERY & EQUIPMENT ....................................36 RING POWER CRANE ..................................................................15 ROSCO MANUFACTURING ......................................................46,47 SAKAI AMERICA INC ................................................................52,53 SANY AMERICA INC ......................................................................31 SITECH SOUTH ..............................................................................19 SOUND HEAVY MACHINERY ..................................................10,23 SOUTHERN QUALITY TRUCK & EQUIPMENT ............................24 SUMMIT SUPPLY GROUP ............................................................33 TAKEUCHI ......................................................................................77 TEREX USA LLC ............................................................................25 THE IRONPEDDLERS ....................................................................87 TORO ..............................................................................................78 TRACTOR TRACS INC ..................................................................60 TRANSIT AND LEVEL CLINIC INC ................................................11 VOLVO COMPACTION ..................................................................48 WACKER NEUSON AMERICA CORPORATION ..........................67 WAINROY........................................................................................33 WEILER PRODUCTS ................................................................50,51 WIRTGEN AMERICA ......................................................................49 YANMAR AMERICA CORP ............................................................79 GEORGIA SUPPLEMENT

CENTRAL ATLANTA TRACTOR ......................................................7 COWIN EQUIPMENT CO INC ........................................................11 GORILLA HAMMERS........................................................................1 REYNOLDS-WARREN EQUIPMENT CO INC..................................3 TRACTOR & EQUIPMENT CO INC................................................12 WESPRO JCB ..................................................................................9 YANCEY BROTHERS CO ................................................................5

The Advertisers Index is printed as a free editorial service to our advertisers and readership.

Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 1, 2023 • Page 87

Sales • Service • Parts • Rentals 3504 N. Rocky River Rd. Monroe, NC 800-438-1933 704-289-8591

2820 Superior Drive Wake Forest (Raleigh), NC 984-235-7665

209 E Victor Hill Road Duncan (Greenville), SC 864-409-1143

www.ironpeddlers.com

3911 Wesley Street Myrtle Beach, SC 843-236-2226

Page 88 • November 1, 2023 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

A BEAST FOR ALL AP A PLICATIONS Get class-leading power and per formance with a 2050M dozer from CASE Construction Equipment. Featuring more than 81,000 pounds of drawbar pull and 214 horsepower, these s machines can easily push through all your jobs — from ma m ss ear thmoving to fine finishing. The highly versatile 2050M also is compatible with a wide variety of attach c ments, DIA kits, and specialty grading solutions n to match your specific tasks.

Tackle Ever y Type of Work with a CAS A E Dozer from Hills Machiner y

QUALITY USE ED EQUIPMENT T FROM HILLS MA M CHINERY

O P F

O P F

2012 Case SV212 84” smooth dr drum m roller roller, EROPS, 2373 hours. RO7248 ..............$64,000 2020 TEREX TA300, AT3691, HOURS 4294 ...... ............................................$CALL FOR PRICE

2015 Case CX2110C 2 way a aauxiliary iliar hhydraulics, dra lics hydraulic thumb. Fresh service, including new pins and bushinggs. EX2865.................$105,000 2020 CASE CX210D, EX5449, HYDRAULIC THUMB, HOURS 2168 ........$CALL FOR PRICE

O P F

O P F

2016 Terex Finla Finlay 883 883+ 99.16 16 CY hhopper, hopper 48” conveyor, 32” middle grade conveyor, 32” fines conveyor. CS6573................$217,700 2022 CASE CX250D LR, EX358A, HOURS 965.. ............................................$CALL FOR PRICE

2016 Edge TRM622 TRM6622 Trommel 48” feeder belt, belt 60” collection bellt, 42” oversize belt, 42” radial fines belt, 7/8 funnction radio remote control.

2022 CASE 650M LGP, DO591E, CAB, HOURS CS0276 ...............................................$202,880 962 ....................................$CALL FOR PRICE

North Carolina Asheville 828-820-5265

Charlotte 704-208-5564

S South Carolina Greensboro 336-308-3045

Greenville 2 252-752-7145

Raleigh 919-746-79 938

Wilmington 910-800-2070

©2023 Hills Machinery Co. All rights reserved. CASE is a trademark registered in the United States annd many other countries, owned by or licensed to CNH Industrial N.VV.., its subsidiaries or affiliates.

Columbia C 8 803-658-0200

Charleston 843-225-93 377

Greenville 864-546-5208

www.h hillsmachinery.com