Attachment Section

from Southeast 13, June 30, 2021

Pages 29-35SECTIONAttachments & Parts

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Kubota Introduces Attachments for Stand-On Track Loader

The compact mount is performance-matched for the BR360 and BR460 breakers for optimum efficiency.

Kubota Tractor Corporation announced a new line of attachments now available for its SCL1000 stand-on track loader, which hit the market itself just this year.

The SCL1000 became available earlier this year and comes equipped with wide tracks, narrow body and a rated operating capacity (ROC) of 1,000 lbs. to meet the demands of landscape contractors and rental yards alike. And now, with the new attachment package, contractors will be able to add compact buckets, trenchers, pallet forks, a compact mount for breakers and even a skid auger or power rake to the SCL1000, increasing functionally on a job site.

“The SCL1000 was introduced into the marketplace earlier this year with overwhelming excitement and market demand,” said Tim Boulds, Kubota construction equipment product operations manager. “We are thrilled to enter the stand-on loader segment with the SCL1000, and these attachments will further its capabilities to meet a multitude of contractor demands and applications.”

Kubota is announcing five new attachments for the SCL1000, including: • Compact Buckets — There are six compact buckets available for the new SCL1000, including both standard and high capacity options. Standard capacity buckets include the CL136L, CL142L, CL236L and the CL242L, which are either standard 36- or 42-in. bucket options and available with bare edge, bolt-on edge or bolt-on teeth. High capacity buckets include the CL148H and CL248H, both of which offer 48-in. bucket options with bare edge, bolt-on edge or bolt-on teeth.

• Compact Pallet Forks — The CPF12 pallet fork comes in 36and 42-in. fork length options and helps contractors and material handlers in a variety of industries efficiently move loads from trailers, flatbeds or racking systems. The pallet fork boasts a 1,200-lb. capacity, Category II hitch and spill guard. The CPF12 has an adjustable fork width with springloaded toggle to lock in place. • Compact Power Rake — A new compact power rake, the CSR10, also is available for the SCL1000 with a 48-in. working width and heavy-duty Category II hitch for both landscape and construction applications. With its center pivot, it allows narrow width access. Side plates can be added to angle the CSR10, making seedbed prep a breeze. And, the power rake features tubeless tires with sealant and easy, adjustable hydraulic angling. • Compact Trencher — The CTR compact trencher is available in three sizes with 30-, 36- and 48in. trenching depths, and ranges in chain widths from 4 to 10 in. Chain styles are designed for efficient digging of trenches and ideal for irrigation and utility contractors, making it a popular rental tool. • Compact Skid Auger — The CSA10 compact skid auger has a pendulum mount and features a reversible gearbox with a 2-in. hex output shaft to attach to a variety of augers. Landscapers and contractors will find the CSA10 is a durable tool for digging holes for footings, fences, signs or trees. • Compact Mount for Breakers — The compact mount is performance-matched for the BR360 and BR460 breakers for optimum efficiency. This unit is ideal for demolition of concrete and rock, and as a rental tool where optimum power is required.

The SCL1000, and attachments, are available at Kubota authorized dealers now.

For more information, visit KubotaUSA.com. 

The CPF12 pallet fork comes in 36- and 42-in. fork length options and helps contractors and material handlers in a variety of industries efficiently move loads from trailers, flatbeds or racking systems. The CTR compact trencher is available in three sizes with 30-, 36- and 48-in. trenching depths, and ranges in chain widths from 4 to 10 in.

Mobro Marine Sells CRANE PARTS

2082500022 - Two turntable bearings for a Komatsu PC400-3. Avon# 2055B3................................................................................$7,175 Each 2072500022 - Two turntable bearings for a Komatsu PC300-3. Avon# 1555B3................................................................................$4,475 Each 2052500021 - Two turntable bearings for a Komatsu PC200-3. Avon# 1148B4................................................................................$3,450 Each 24100N418F1 - One turntable bearing for a Kobelco 909. Avon# 1551B9 ................................................................................................$2,075 21400N3354F2P1 - One turntable bearing for a Kobelco 907C or K907C. Avon# 1447B2 ......................................................................$4,850 KBB0282 / D28001 - One Link-Belt turntable bearing for a LS3400C. Avon# 1249B5 ..............................................................................$3,950 TH103075 - One John Deere turntable bearing for model 792. Avon# 1556B8 ........................................................................................$3,500 TH108810 or AT190766 - One John Deere turntable bearing model 490D and 495D. Avon# 1143B9 ....................................................$1,100

You will find the parts you need at MOBRO Marine, Inc. We purchase in bulk directly from the manufacturers to maintain our large inventory. We also have a large inventory of long-lead time parts for cranes that can’t be found anywhere else. Not only does this mean we have the part you need in stock, it also saves you money. Because we buy in volume, we can buy for less and pass the savings on to you.

Our large inventory keeps construction equipment performing at optimum levels. We offer same-day shipping on most parts - you’ll experience minimal downtime. We are a full-service company. We not only supply parts, but we also service and repair construction equipment and cranes of any type. We sell high quality genuine OEM parts from the following manufacturers:

• Terex • American • Bucyrus-Erie • P&H • Kobelco • Koehring • Lorain • Northwest Crane

MOBRO MARINE, INC.

Breakers are a flexible and crucial attachment used for a wide variety of jobs, including tunneling, trenching, foundation removal, dredging, bridge demolition, quarry excavation, mining and more. To meet growing demand in North America, Komatsu is expanding its product line of hydraulic breakers.

Designed and tested for compatibility with Komatsu excavators from the PC78 up to the PC490, the high-percussion efficiency and unique variable energy technology of these breakers are built to provide high production in multiple applications, according to the manufacturer.

To protect the breaker, carrier and operator, Komatsu built in several features and benefits. The breakers have an accumulator that eliminates hydraulic pump cavitation to prevent flow surges back to the carrier hydraulic tank. By recycling high-pressure oil internally, this allows more energy with a lower flow, to reduce hydraulic pressure spikes and protect the carrier’s hydraulic system.

JTHB-G Line of Breakers

Easy to maintain with only two moving parts, the JTHB-G line utilizes a hybrid design of hydraulic flow and pressure along with a nitrogen-filled chamber that provides striking energy. The tie-rod design is engineered for durability in tough rock and concrete applications.

Adding to longevity and durability, blank firing protection is standard and includes a hydraulic cushion at the base of the cylinder, to reduce metal-to-metal contact. Larger models feature special key slot dampers that help reduce vibration to the excavator, adding to operator comfort.

The simple design of the JTHB-G hydraulic breakers translates to reduced maintenance and fewer parts to buy, to help lower equipment-running costs. A one-year warranty comes with all G-series breakers and also applies to breakers used for mining and quarry applications.

The breakers have an accumulator that eliminates hydraulic pump cavitation to prevent flow surges back to the carrier hydraulic tank. By recycling high-pressure oil internally, this allows more energy with a lower flow, to reduce hydraulic pressure spikes and protect the carrier's hydraulic system. JMHB-H Line of Breakers

Compact yet powerful, the JMHB-H attachments are accumulator-type hydraulic breakers for a variety of rock and concrete demolition applications. Unlike gas-fired breakers, the JMHB-H series does not require a nitrogen recharge. It is equipped with blank firing protection to help prevent piston movement via a hydraulic brake.

For consistent impact power in a variety of environments, sound dampening housings help assure compliance with noise ordinances, even in urban applications.The breaker protects itself with a pressure regulator valve to prevent overflow, and its dampening system helps prevent damage to excavator booms and housing cracks.

To enable the use of more powerful breakers on smaller excavators, a single powercell eliminates heavy tie rods to provide a better weight-to-power ratio on compact models, while the mounted automatic lubrication feature helps protect against dust and debris. Similar to the G-series, all H-series breakers come with a one-year warranty.

For more information, visit komatsuamerica.com. 

Prinoth Announces Updates to M450s Mulching Head

Prinoth is well-known for its crawler carriers but also manufactures a wide range of mulching equipment. Through its vegetation management division, Prinoth continuously invests in developing new products, including the latest updates of the M450s mulching head.

Various Working Widths for All Skid Steers

After the successful introduction of the 74.8-in.-wide M450s-1900 in the North American market, the head is now available in a smaller working width of 63 in. (M450s1600) and a larger one with 86 in. (M450s2200), to ensure every customer’s needs are met.

Developed for a range of carrier vehicles from 70 to 180 hp and a hydraulic oil flow between 22.5 to 66 gpm, the M450s is a compact and powerful head for a variety of mulching applications.

With the feature “Plug & Mulch”, the M450s is ready for simple set up on any skid steer loader, make and model. Hydraulic hoses with standard fittings are included in the package as delivered from the factory.

The M450s gets its power from a 115cc Rexroth hydraulic motor with high-pressure variable displacement. For the 74.8-in.-head a 170cc motor also is available, ideal for a volume flow range from 41.8 to 54.9 gpm. A new cogged belt drive transfers the power to the rotor.

Bite Control System

The rotor combines the BCS (bite control system) with two types of cutting tools. Whether steel knives or carbide teeth, the BCS-Rotor is perfectly balanced for less wear on bearings and high speed, meaning high productivity and a perfect finish, according to the manufacturer.

In order to maintain the machine efficiently, an extensive spare parts network is available to customers in the USA. Furthermore, the operator can train their skills with online tutorials.

Visibility is enhanced from the operators’ seat with a good line of sight to the work area, offering safe and productive mulching. The center of gravity is close to the carrier; therefore, it is easier to handle and provides less tipping or risk of roll over. For maximum safety, the M450s is equipped with anti-slip surfaces on the top of the housing and with two steps for a safe access to the carrier.

For more information, visit www.prinoth.com. 

Mini-Excavator... Mini-Excavator...

XBoom Coupler® SystemXBoom Coupler® System

Do This? Do This?

It Can Now!It Can Now!

Quick Change Quick Change from Excavator... from Excavator... To Rigid Boom, To Rigid Boom, Universal Skid-Steer Universal Skid-Steer Tool Carrier!Tool Carrier!

(800) 526-8538 (800) 526-8538

Amulet.comAmulet.com Available for most late-model brands up to 13K-Lbs

QuickChange can now be provided on tiltrotator models R3 to R8, as well as on QuickChange machine couplers in the 6.6 to 35.2 ton (6 to 32-t) range.

Fully Automatic… Rototilt Broadens QuickChange Coupler Program to Include Growing Compact Machine Sector

Development continues for Rototilt’s fully automatic quick coupler system QuickChange. Rototilt is expanding its line of next-generation quick coupler systems with three additional new sizes: QC45-4, QC45-5 and QC60-4, with delivery beginning May 2021.

QuickChange can now be provided on tiltrotator models R3 to R8, as well as on QuickChange machine couplers in the 6.6 to 35.2 ton (6 to 32-t) range. And with the award-winning SecureLock safety solution as standard, the risk of accidents associated with improperly coupled quick couplers is reduced due to continuous monitoring of the quick coupler locking function in the machine coupler and tiltrotator.

“We’re seeing a clear increase in interest among users of compact machines in using fully automatic quick coupler systems. We can now offer the latest technology for these machines too, with the launch of QC45-4 and QC45-5,” said Sven-Roger Ekström, product manager.

With Rototilt QuickChange for machine couplers, tiltrotators and tools, hydraulic and electronic tools can be changed without even leaving the cab. QuickChange is based on the S standard, which is compact and very robust. QuickChange is part of the common Open-S standard, which ensures compatibility between different manufacturers for the hydraulic interface between machine couplers, tiltrotators and tools.

With Rototilt QuickChange, users can quickly disconnect the tiltrotator when the job doesn’t require tiltrotator functionality. The excavator becomes a full-fledged tool carrier that lets users work faster, smarter and with more precision, according to the manufacturer.

For more information, visit rototilt.com. 