Northeast 13, June 24, 2020

Published Nationally Northeast Edition

® June 24 2020 Vol. LVII • No. 13

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

NYC Restarts Non-Essential Construction

Crews Address Aging Infrastructure in Pa. …8

SEI, LeeBoy to Unveil ‘Stars & Stripes’ Paver…18

During the first 30 days after construction activity resumed on June 8, the department will focus on educating and helping the industry learn how to implement new procedures.

Panther Vehicle Excels Way, Way Down Under…38

Table of Contents ................4

The New York City Department of Buildings released new COVID-19 safety guidelines for property owners and contractors as 33,556 nonessential construction sites get back to work as part of New York City’s entrance into Phase One of New York State’s reopening plan, which started June 8, 2020.

These new required safety measures for construction sites were developed in partnership with the New York City Department of Health and Mental Hygiene (DOHMH) and are being implemented to prevent the spread of the novel coronavirus to workers and the public during the ongoing COVID-19 pandemic. Read the guide-

lines. “The pandemic is slowly receding because New Yorkers did what we do best — we came together and made the necessary sacrifices to protect our families and neighbors,” said Department of Buildings Commissioner see NYC page 30

Recycling Section ........55-77

Smart Move: Embracing New Tech for an Edge

Attachment & Parts Section ......................................79-86

Technology Gives Contractors Better Results in the Field

Truck & Trailer Section ........ ......................................87-93

By Lucy Perry

Auction Section..........96-104

Implementing new technology into construction is a smart decision, but it’s a process. see TECHNOLOGY page 34 The technology must present tangible value from Day Dozer blade and bucket are controlled with automation, 1, and it has to make sense aligning material movement to design decisions with for the job site. It must work Komatsu’s intelligent Machine Control technology.

Business Calendar ..........100 Advertisers Index ............102

CEG CORRESPONDENT

as well in the field as it did at the tradeshow. Smart contractors choose products or platforms with the worker in mind. Peter Maglathlin, CFO of Trade Hounds,

Page 2 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

QUALITY USED EQUIPMENT VALUE V ALUE & PERFORMANCE ASSURED

2015 CATERPILLAR AP1055F, 2427 HRS, S/N: TJ500194 ........$295,000

2012 CATERPILLAR 420F IT, 7593 HRS, S/N: JWJ00357 ........$51,000

2016 CATERPILLAR 279D, 662 HRS, S/N: GTL03558 ................$49,000

2018 JOHN DEERE 323E, 367 HRS, S/N: 325488....................$42,500

2016 CATERPILLAR CS54B, 535 HRS, S/N: CS500297........$111,000

2016 CATERPILLAR D4K2 LGP, 776 HRS, S/N: KR202287 ......$109,000

2014 CATERPILLAR D6T LGP, 3341 HRS, S/N: ZJB01084 ........$245,000

2012 CATERPILLAR D6T LGP, 9452 HRS, S/N: ZJB01167 ........$95,000

2016 CATERPILLAR 304E2, 2312 HRS, S/N: ME400655 ........$42,500

2016 CATERPILLAR 313F L, 1047 HRS, S/N: HDK00270 ......$110,000

Used Parts • Quality Parts • Attachments Are you looking for a reliable source for quality used components and parts? Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem. Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line. 2016 CATERPILLAR 314E, 2648 HRS, S/N: ZJT01621 ........$135,500

2016 CATERPILLAR 335F CRT, 4852 HRS, S/N: KNE00557 ......$267,000

2016 HITACHI ZX85 USB-5N, 2754 HRS, S/N: 00018300 ........$50,500

Call: 732/885-3005 Fax: 908/995-7522 jmeyer@foleyinc.com

www.outbackparts.com

ASK ABOUT OUR FLEET RESTRUCTURING OPTIONS. WE CAN HELP WITH ONE MACHINE OR THE ENTIRE FLEETT..

732-417-7109 Piscataway, NJ; Hammonton, NJ; Bensalem, PA; Whitehall, PA; Bearr,, DE WWW.FOLEYINC.COM/USED

JOE VILLA International & Domestic Used Equipment Sales & Purchasing

JVILLA@FOLEYINC.COM 267-990-8161

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 3

IT’S THE DOWN-T W O-EARTH APPRO A ACH. Yo ou’ll find everything you n need at JESCO - the equipment, the parts, the service and the people who can answer yourr questions and make things work.

Integrity. Commitment. Honnesty. Expertise. JESCO strives to bee everything you’re looking for in a company. Yo ou can depend on us. Whether yoour job is to construct, d demolish, li h pave or grade, d JEESCO delivers d li wha h t you need. d

www.jesco.us

800-241-7070

Page 4 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

®

8

CREWS ADDRESS INFRASTRUCTURE IN NORTHUMBERLAND, PA.

It’s a familiar story across the country as aging infrastructure deteriorates under increasing traffic. In Northumberland, Pa., the underlying structure of PA 147 and U.S. 11 is brick or cement concrete installed during the 1920s and 1940s.

12

VOLVO PARTNERS WITH LOCAL COMMUNITY FOR COVID SUPPORT

24

WAGMAN HEAVY CIVIL TO BUILD RAPPAHANNOCK RIVER CROSSING

A new partnership with Volvo Construction Equipment and the Shippensburg Community Resource Coalition (SCRC)was formed to help neighbors during the COVID-19 pandemic.

Wagman Heavy Civil Inc. announced in late May that it had been awarded a $107 million contract to design and build the Interstate 95 Northbound Rappahannock River Crossing project in Stafford County, Virginia.

The construction industry added 464,000 net new jobs in May, according to an Associated Builders and Contractors analysis of data released by the U.S. Bureau of Labor Statistics.

The chief executive officer of the Associated General Contractors of America, Stephen E. Sandherr, issued a statement in reaction to the passage of the Paycheck Protection Program Flexibility Act of 2020.

On June 15, the city of Hoboken, N.J., restarted installation of the first phase of its water main replacement project, which will replace a total of 15 blocks, or 7,035 linear ft. of Hoboken’s oldest water mains.

Requiring the federal government to impose a single, emergency standard for coping with COVID-19 is misguided because workers are better protected from the virus by construction industry best practices.

Together Stephenson Equipment and LeeBoy are putting together the first ever “Stars & Stripes” version of LeeBoy’s 8520B asphalt paver in support of The Gary Sinise Foundation.

Mr. Kinsley began his career in the construction industry directly after his high school graduation in 1958, working for C. Joseph Deller of Dallastown, Pa. By the early 1960s, he had established his own lawn grading business.

A new study released June 2 finds that composite retirement plans would have fared better during the coronavirus pandemic and related market declines than traditional defined-benefit multi-employer plans.

Eric Steben traveled to the end of the earth — the southern end — to see how a one-of-a-kind tracked vehicle behaved under harsh conditions. The Antarctica laboratory proved the value of the specialized machine.

12

CONSTRUCTION EMPLOYMENT SEES RECORD REBOUND IN MAY

16

INSTALLATION RESUMES ON $33M WATER MAIN REPLACEMENT IN HOBOKEN

18

SEI, LEEBOY SUPPORT THE GARY SINISE FOUNDATION

18

ANALYSIS FINDS COMPOSITE PLANS WOULD HAVE FARED BETTER

22

MINIMIZING RISK: MANUFACTURERS SHARE BEST PRACTICES

Over the past several weeks, AEM has developed a list of best practices based on what many of our member companies are doing to keep operations open while minimizing the risks associated with the COVID-19 pandemic. Founder, Publisher & CEO Northeast Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

LinkedIn

Facebook

38

Twitter

26

26

36

38

87

RECYCLING SECTION

55

PAYCHECK PROTECTION PROGRAM IMPROVEMENTS WILL SAVE JOBS

56

REJECT EFFORT TO FORCE UNIVERSAL COVID SAFETY STANDARD ON OSHA

66

KINSLEY CONSTRUCTION FOUNDER ROBERT ALLEN KINSLEY PASSES AWAY

62

70 76

U.S. MARINE VETS FIND NEW PATH WITH CORPS MATERIALS

ASV, LOFTNESS OPTIMIZE BATTLE AX MULCHING HEAD FOR ASV MACHINES

CAT MH3040 MATERIAL HANDLER CUTS FUEL BY UP TO 25 PERCENT ALUMINUM PRODUCER RELIES ON ‘COMPUTER FREE’ SENNEBOGEN 825M TEREX WASHING SYSTEMS OFFERS LOCAL, REMOTE TECH SUPPORT

MB CRUSHER HELPS CROATIAN TOWN LAY NEW WATER PIPES

DEPARTMENTS

PRINOTH PANTHER PROVES ITS METTLE WAY, WAY DOWN UNDER

96 COMING AUCTIONS 100 BUSINESS CALENDAR

STELLAR INDUSTRIES CELEBRATES 30 YEARS OF INNOVATION

79 84 86

Stellar Industries Inc. celebrated its 30th anniversary on May 9. While the world continues to change daily, the Iowa-based manufacturer took a moment to recognize three decades of work truck innovation.

EQUIPMENT

KINSHOFER C40HPX Clamshell Bucket EPIROC HATCON Remote Monitoring Device CALDWELL Mill-Duty Coil Grab

Edwin M. McKeon Jr.

Kent Hogeboom

Ed Bryden

Joshua Phillips

• New Jersey • Eastern Pennsylvania • Northern Maryland • Delaware

• New York • New England • Northern Pennsylvania

• West Virginia • Western Pennsylvania

• National • Central Pennsylvania

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

18

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Circulated Throughout • New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

8

IN THIS ISSUE

NORTHEAST EDITION

YouTube

215/885-2900 215/760-6641 tmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2020, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from

Cell e-mail

315/725-5726 jphillips@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 5

SMALL MACHINEE. BIG ATTITUDE. The all-new G-Seeries Skid Steers and Compact Track Loader are majorrly tough customers, because tough cu ustomers like you helped deesign them. Yo Your input led to t increased durability, greater engine po ower,r, and a improved fuel cappacity. And with fewer grease zerks and extended RLO FKDQJH LQWHUYDOV VHUYLFLQJ LV HYHQ VLPSOHHU WKDQ EHIRUH $YDLODEOH LQ Æ&#x;YH Æ&#x; PRGHOV LQFOXGLQJ two radial-lift opt ptions, the G-Series can takee down the biggest gg jobs j — and yyour operating p g costs — all at the same time. To To learn l more, see your dealer or visit our website.

3/$67(5(5 (48,30(17 &2 ,1&

www.plasterer.com

Page 6 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RENTALS - SALES - SERVICE - PARTS - TRAINING Seasonal Savings on Honda Generators and Water Pumps! EU2200i Companion Honda Generator, Inverter

Honda Heavy-Duty 2” Construction Trash Pump WT20X

• 1800 watts, 120V • Power for your furnace, fridge, microwave, most 13,500 BTU RV AC units, and more • Super quiet • Convenient electric start • Fuel efficient - up to 7.5 hrs. on .95 gals of gas • Inverter - stable power for computers and more

• Heavy-duty 2" construction trash pump • Easy starting Honda OHV commercial engine • 185 gal./min capacity • Solid handling capability up to 13/16" • Cast iron volute and impeller • Quick clean out port

Please read the owner’s manual before operating your Honda Power Equipment and never use in a closed or partly enclosed area where you could be exposed to odorless, poisonous carbon monoxide. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2015 American Honda Motor Co., Inc.

NEW PRODUCT

e-Dingo™ 500 Wheeled

Link-Belt 145 X 4 Spin Ace

• Introducing the world’s first electric Dingo® • Operating Capacity: 515 lbs • Transport Speed: 2.75 mph • Ground Clearance: 5.8”

Gehl V270 Skid Steer • Operating capacity: 2,700 lbs. • Lift Height: 130.3" • Near vertical lift height

• Operating weight: 33,600 lbs. • Max dig depth: 19' 9" ft/in • SAE Net Horsepower: 102 HP

Takeuchi Excavators

Takeuchi Track Loaders 2 yr. / 2,000 hr. warranty standard First in industry with Takeuchi Fleet Management

0% Financing for 60 Months! The full line of Takeuchi Excavators is available for sale with operating weight ranging from 2,370 lbs. to 34,700 lbs. Takeuchi TB235 Excavator

The full line of Takeuchi Track Loaders is available for sale with lifting capacities ranging from 1,841 lbs. to 4,107 lbs. Takeuchi TL 12V2 Track Loader

We are a Full-Service Certified Dealer Great deals on used equipment for sale! Go to norrissales.com/used-equipment

NEW JERSEY LOCATION 856-740-1400

Frank Kimberling Ext. 2005

668 Berlin Cross Keys Rd., Sicklerville, NJ

Items Available for Sale or Rent!

PENNSYLVANIA LOCATION 0% 610-279-5777 Financing*

Available!

NorrisSales.com

Rich Hess Ext. 3055

1010 Conshohocken Rd., Conshohocken, PA

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 7

3 Year W Best in the Baursranty iness! With 4 ye ars FREE GPS

Dealer Im mprint Area

631/643-2605 www.allislandequipment.com follow us on Instagram

Serving Nassau, Suffolk and the Five Boroughs

STILL FAMILY OWNED & OPERATED SINCE 1970

Page 8 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Address Aging Infrastructure in Northumberland

The Northumberland Project, a road reconstruction job, was launched in June 2016 to address several issues, including lengthening the turning lanes to increase storage capacity and reduce congestion and pollution in the borough.

By Lori Lovely

come, according to Baker. The reconstruction encompasses Duke Street (PA 147) from 8th Street to Water Street (U.S. 11); Water Street (U.S. 11) from the Norfolk Southern Railroad bridge to King Street; King Street (both PA 147 and U.S. 11 SB) from the North Branch Susquehanna River bridge to Front Street; and Front Street (U.S. 11 SB) from King Street to the merger point of U.S. 11 northbound and southbound lanes near the Borough limits. Additional highlights of the complete curb-to-curb reconstruction of Duke Street, Water Street, King Street and Front Street include new signal equipment at the intersections of Duke Street and Water Street and King Street and Water Street. Work on U.S. 11 (Water Street) from the Norfolk Southern Railroad bridge to the West Branch Susquehanna River bridge was performed under a separate contract in 2019 in coordination with this project.

CEG CORRESPONDENT

It’s a familiar story across the country as our aging infrastructure deteriorates under increasing traffic loads. In the Borough of Northumberland, the underlying structure of PA 147 and U.S.11 consisted of brick or cement concrete installed during the 1920s and 1940s, according to Maggie Baker, PennDOT spokesperson. “The brick and concrete pavements under the asphalt pavement were in poor condition, having long exceeded their service life,” she said. The pavements had required frequent lane closures for maintenance for quite some time, resulting in long lines of traffic during peak hours at the Duke Street-Water Street and the King Street-Water Street intersections. There were additional issues, such as flooding, sidewalk intersections that weren’t handicap accessible and the difficulty large vehicles had in making turns because of the tight turning radii. Crews perform utility work on Front St. “Large vehicles would often traverse over the curb onto the sidewalk when lengthening the turning lanes to increase storage capacity and reduce congestion and making those turns,” Baker added. This posed several concerns with safety pollution in the borough; expanding the turning radii at the signalized intersections to among them. permit vehicles to stay in their lanes, reducing conflict with through lanes as well as The Fix Is in The Northumberland Project, a road reducing the likelihood of vehicles climbing reconstruction job, was launched in June over curbs and jeopardizing pedestrian safe2016 to address several issues, including ty; adding ADA ramps to make sidewalks

handicap accessible; and upgrading existing pipes, inlets and curbs to improve drainage and reduce flooding. “The project addresses queuing by extending a left turn lane at the intersection of Duke and Water Street,” Baker said. The complete reconstruction of PA 147 and U.S. 11 within the borough will provide high-quality, durable pavements for years to

Staffing, Equipment The $13.7 million project — paid for with both state and federal funding — is approximately 85 percent complete, with crews belonging to 22 different subcontractors on site at various times. “The work schedule [has] varied, depending on the phase,” Baker said. see NORTHUMBERLAND page 46

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 9

Authorized Sales, Parts, Service & Rentals

EQUIPMENT RENTALS

Jason Nadasky: 845-744-2006

TELEHANDLERS

EXCAVATORS

DOZERS

WHEEL LOADERS

OFF-ROAD TRUCKS

SOIL COMPACTORS

MILLING MACHINES

VIBRATORY PLATES

ASPHALT COMPACTORS

MOBILE JAW & CONE CRUSHERS

ATTACHMENTS

SKID STEERS

Contact one of our branches today! New York

New Jersey

Connecticut

Pennsylvania

Holbrook 914-403-5434 Yonkers 914-336-6642 Holmes 845-283-2577 Pine Bush 845-417-4422

South Plainfield 908-377-6538 Winslow 856-912-1604

Newington 860-883-3146

Hatfield 267-328-0669 Harrisburg 717-654-0137 Wilkes-Barre 570-237-2054 State College 814-933-6369

USED EQUIPMENT FOR SALE

Delaware/ Maryland Baltimore 443-618-0122

Jim Casendino: 908-561-9000

2016 KOMATSU D39PX-24, Stk. #C031898 $86,000

2017 KOMATSU D51PXi-24, Stk. #C033485 $183,000

2017 KOMATSU PC290LC-10, Stk. #C033263 $145,000

2014 VOLVO EC480DL, Stk. #C040878 $98,000

2016 KOMATSU D65EX-18, Stk. #C026333 $174,000

2012 KOMATSU HB215LC-1, Stk. #C029435 $62,000

Page 10 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

1998 Case 621B, stk # EQ0043215, Cab w/ Heat & AC, ACS QC, 4-IN-1 MP Bkt., 20.5Rx25 Tires, Municipal Owned, 14,456 Hrs ................................................$24,950

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 2016 Case CX470C, stk # EQ0022209, Cab hours ....................................................... $121,053

w/Heat & AC, Std. Boom. 11'1" Arm, 36" TBG Shoes, Aux. Hydr., 54" Bucket, Hydr. CWT Removal, FOPS Top Guard, Cat Walks, Rear & Side View Camera, 2828 Hrs $CALL

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

Espa b la a H Se

Se H

ño l

2014 CAT 336EL, STK#19E048 EXCAVATORS 19E048 - 2014 CAT 336EL, EROPS W/AC, REARVIEW CAMERA, 12'.10" STICK, 33'.5" PADS, HYD Q/C, 65" BUCKET ........ ................................................................................$144,000 19E007 - 2010 CAT 336DL, EROPS W/AC, 10’.6” STICK, 33’.5” PADS, AUX HYD, BKT ....................................$98,000 19E012 - 2010 CAT 321DLCR, EROPS W/AC, 9’.6” STICK, 31’.5” PADS, AUX HYD, Q/C, 36” BUCKET................$98,000 20E012 - 2009 CAT 308DCR, EROPS W/AC, 7'.2" STICK, SWING BOOM, AUX HYD, RUBBER TRACKS, THUMB, 7'7" PUSH BLADE, 30" BUCKET........................................$39,500 20E001 - 2014 CAT 305.5ECR, EROPS W/AC, 6' STICK, SWING BOOM, RUBBER TRACKS, HYD THUMB, 6'.6" PUSH BLADE, 18" BUCKET ..................................................$43,500

abl a

Espa

ñol

2017 CAT D6K-II LGP, STK#19E058 RUBBER TIRE LOADERS/ WHEEL LOADERS

LOADER BACKHOES 20E018 - 2001 CAT 420D, EROPS, 4X4, GP BKT, EXT-HOE,

19E076 - 2006 CAT 950H, EROPS W/AC, HYD Q/C, SIDE

PATTERN CHANGER, 24” BKT ..................................$28,000

DUMP BUCKET, AUX HYDS, RIDE CONTROL, 23.5R25 TIRES.

19E038 - 2007 CAT 430E-IT, EROPS W/AC, 4X4, FRONT AUX

..................................................................................$71,000

HYD, Q/C, GP BUCKET, EXT-HOE, PATTERN CHANGER, 24”

19E037 - 2009 CAT 938H, EROPS W/AC, HYD Q/C, SIDE

BUCKET ....................................................................$43,000

DUMP BUCKET, AUX HYDS, RIDE CONTROL, 20.5R25 TIRES.

19JV002 - 1999 CAT 446B, EROPS, 4X4 POWERSHIFT

..................................................................................$69,000 19E061 - 2008 VOLVO L180F, EROPS W/AC, GP BUCKET, 26.5X25 TIRES ..........................................................$58,000 19E068 - 2013 CAT 924K, EROPS W/AC, HYD. FUSION QC,

TRANS, FRONT AUX HYD, 4-IN-1 BUCKET, STD-HOE, 24" BUCKET ....................................................................$27,000 19JV003 - 2002 CAT 446B, EROPS, 4X4 POWERSHIFT

DOZERS

GP BUCKET, RIDE CONTROL, TRACTION CONTROL, POWER

TRANS, FRONT AUX HYD, 4-IN-1 BUCKET, STD-HOE, AUX

20E014 - 2012 CAT D6T XL, EROPS W/AC, CAT REBUILT TRANS, 10'.8" SEMI-U-BLADE W/TILT, RIPPER CONTROLS, ACCUGRADE PREWIRE, 24" SHOES, DRAW BAR ................................................................................$125,000 20E015 - 2012 CAT D6T XW VP, EROPS W/AC, 13'.7" 6-WAY BLADE, RIPPER CONTROLS, ACCUGRADE PREWIRE, REVERSE CAMERA, 28" SHOES, PACCAR PA56 WINCH.......... ................................................................................$169,000 19E058 - 2017 CAT D6K-II LGP, EROPS W/AC, STRAIGHT 6WAY BLADE, RIPPER CONTROLS, GRADE CONTROL, NEW UC, 30" SHOES ........................................................$135,000 20E004 - 2015 CAT D5K-II LGP, EROPS W/AC, 10'.4" STRAIGHT 6-WAY BLADE, RIPPER CONTROLS, GRADE CONTROL, 26" SHOES......................................................$82,500

AND HEATED MIRRORS, 20.5 X 25 TIRES ..............$89,000

HYD, 30" BUCKET......................................................$28,000

19JV717 - 2002 KOMATSU WA320-3MC, EROPS, HYD. QC,

20E011 - 2002 JOHN DEERE 310SG, EROPS W/AC, 4X4,

(2) GP BUCKETS, FORK ATTACHMENT, 20.5 X 25 TIRES ........

POWER SHIFT TRANS, RIDE CONTROL, FRONT AUX HYD,

..................................................................................$38,000 19E071 - 2015 DOOSAN DL250-5, EROPS W/AC, HYD QC, GP BUCKET, RIDE CONTROL, HEATED MIRRORS, 20.5R 25 TIRES ........................................................................$89,000 19E078 - 2012 CAT 930K, EROPS W/AC, HYD FUSION Q/C, AUX HYD, GP BUCKET, RIDE CONTROL, TRACTION CONTROL, POWER AND HEATED MIRRORS, REARVIEW CAMERA, 20.5X25 TIRES ................................................$92,000

HYD Q/C, 4-IN-1 BUCKET, EXT-HOE, PATTERN CHANGER, REAR Q/C, 24" BUCKET ............................................$25,000 20E017 - 1995 JOHN DEERE 310D, EROPS, 4X4, GP BUCKET, EXT-HOE, 24” BUCKET ........................................$18,000 20E019 - 2001 JOHN DEERE 410G, EROPS, 4X4, POWER SHIFT TRANS, FRONT AUX HYD, HYD Q/C, GP BUCKET, EXTHOE, 24” BKT ............................................................$20,000

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

Used E ipment Equ

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

2015 Case 580N, stk # EQ0036043, Cab w/ Heat & AC, 4WD, Extendahoe, Pilot Controls, 82" GP Bkt, 24" HD Bkt., Flip-Over Pads, 1,491 Hrs ............................$54,500

2015 Case CX80C, stk # EQ0022211, Cab w/ Heat & AC, 2-Speed, Dozer, Swing Boom, 7'2" Arm, 24" HD Bucket, 18" Rubber Tracks, MF Aux. Hyd., Hyd. QC & Hyd. Thumb, 1,609 Hrs..................$77,500

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

2015 Case CX300C, stk # EQ0034588 w/ Cab Heat621F & AC, Aux. 2012w/ CASE , STK10'8" # 652,Arm, cab w/ heatHydr., & air, 32" TBG valve, Pads,cwt, 48"ride Bkt,control, 3616radial hrs..$125,000 3rd spool tires, 307

2015 Case 1150M Wide Track, stk # EQ0022163, Cab w/ #Heat 2012 CASE 621F , STK 652, & cabAC, w/ 11' heat 6-Way & air, 3rd spool cwt, rideLife control, tires, Draw 307 Blade, 30"valve, Extended U/C,radial Screen, hours1903 ....................................................... $121,053 Bar, Hrs..................................$95,500

hours ....................................................... $121,053

Call today! (800) 737-0049

M E M B E R

See Our Website for a Complete Listing of Used Equipment for Sale

www.gtmidatlantic.com ©2019 GT Mid Atlantic. All rights reserved. CASE is a trademark registered in the United States HUK THU` V[OLY JV\U[YPLZ V^ULK I` VY SPJLUZLK [V *5/ 0UK\Z[YPHS 5 = = P[Z Z\IZPKPHYPLZ VY HɉSPH[LZ

Call For Price 35 West Route 70 Marlton, NJ 08053

856-983-0111 www.cherryvalleytractor.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 11

ROGERS 60 TON 4-AXLE DROPSIDE

IN STOCK! 8’6” X 27’ DECK Air Lift 3rd & 4th Axles Rogers 40 Ton, NoFoot. 24' deck, 20" height adjusts to 18". Adjustable width Bi-Fold Ramps. Reinforced side rails, Reinforced wheelcovers, bucket cut-out, Air ride, Height control. 275's on Aluminum outers. Night lights, Strobes. Black and Red ....................IN STOCK!

Rogers 35 ton, Gentle Riser, 24' deck, 275's Aluminum, Night Lights & Strobes. Rogers Red and Black Paint ................ ................IN STOCK!

Rogers Custom 60 Ton Gentle Riser, 26’ Clear Deck, Paver Front Ramps, Bucket Cut Out, 275’s on Aluminum, Air Lift 3rd & 4th Axles, Night Lights, Strobes ..............IN STOCK!

Rogers Custom 55 ton Gentle Riser, No-Foot Neck, Paver Front, 25' Deck, Full Floor 20" height adjusts to 18" Adjustable Width BiFold Ramps, Reinforced Side Rails. Air Ride Height Control. 275's on Aluminum outers Night Lights, Strobes .... ..............IN STOCK!

Rogers TAG25XXL, 25 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint, 22' and 24' deck, 8’ Air Ramps.. ................IN STOCK!

Felling 25 Ton, Air Tilt, Air Ramps, 24’ Deck + 6’ Tail .............. ................IN STOCK!

ASK ME ABOUT AIR RAMPS!

Rogers CY50GR, 50 Ton Gentle Riser, Paver Ramps, 275’s, Aluminum Wheels, Air Lift 3rd, Night Lights, Strobes, Black and Red Paint.. ................IN STOCK!

2015 Rogers 55 Ton, No-Foot Neck, 8'-6" x 25' deck, 18"/ 20" ride height, 275's, Aluminum.................. ..............IN STOCK!

Page 12 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Employment Sees Record Rebound in May The construction industry added 464,000 net new jobs in May, according to an Associated Builders and Contractors analysis of data released by the U.S. Bureau of Labor Statistics. May represented the largest monthly increase in construction jobs since the government began tracking employment in 1939, a drastic improvement from April, which recorded the industry’s largest month-over-month job loss. While nonresidential construction employment lost more than 570,000 jobs on net in April, a total of 237,000 net new jobs were added in May with job gains in all three nonresidential subsegments. May 2020 nonresidential employment was 286,000 jobs lower compared to May 2019. The construction unemployment rate fell to 12.7 percent in May, up 9.5 percentage points from the same time last year, but down 3.9 percentage points from April 2020. Unemployment across all industries fell to 13.3 percent in May, down from 14.7 percent in April. “One way to look at this stunning jobs report is to suggest that economists missed the mark by approximately 10.5 million jobs,” said ABC Chief Economist Anirban

Basu. “Economists polled by Dow Jones had forecasted a decline exceeding 8 million jobs. Instead, the economy added a bit more than 2.5 million jobs. It’s also possible that economists missed the mark by two to four weeks, as the economy opened up faster than most economists expected and consumers

have been far more willing to engage the economy than many thought possible given the ongoing personal and public health risks presented by COVID-19. “For contractors, this is purely good news,” said Basu. “With the economy beginning its recovery sooner and more dramati-

cally than anticipated, fewer projects are likely to be postponed or canceled. Combined with rising contractor confidence, as indicated by ABC’s Construction Confidence Index, this will also help accelerate the recovery of state and local government finances as tax collections surge, ultimately resulting in more monies available to finance infrastructure. That said, state and local government finances remain in tough shape, with many local government workers losing jobs in May. “Make no mistake — these remain treacherous times,” said Basu. “Though economic recovery may have begun, there is still the possibility of a resurgence in infections as stores, restaurants and other businesses reopen. Moreover, while unemployment dipped to 13.3 percent in May, it remains elevated. Labor force participation has been rocked in recent months, and it may be the case that many dislocated workers, including construction workers, will remain out of the labor force for an indefinite period. There is also a presidential election later this year, which will create further uncertainty for economic decision makers, including among those who purchase construction services.” 

Volvo Partners With Local Community for COVID Support By Volvo Construction Equipment At Volvo Construction Equipment, we believe each of us has a role in building the world we want to live in. The COVID-19 pandemic brought this purpose very close to home and led to a new partnership with the Shippensburg Community Resource Coalition (SCRC) to help our neighbors. The SCRC acts as a connector, assessing social service needs throughout the community and working with over a dozen local organizations to fill in gaps around food insecurity, affordable housing, youth development, mental health issues and substance abuse. During the COVID-19 crisis, the Coalition has held weekly conference calls with its stakeholders to keep a pulse on the community and quickly mobilize assistance. Social distancing restrictions and health safety concerns, as well as job losses and income disruptions are exacting a toll on the emotional and economic wellbeing of our community in ways never seen before. With Shippensburg straddling both Cumberland and Franklin counties, there is the added confusion about where and how to find assistance. Realizing this local impact, Volvo CE

stepped forward to work with the help us help those most in need.” SCRC to fund a new COVID-19 To multiply the giving, an online social worker position. Janelle social fundraising site has been set Carbaugh has been hired to provide up for Volvo CE employees as well social services support to any memas individuals and businesses in our ber of the Shippensburg community community at large, to donate: affected by the pandemic. www.givecampus.com/yekj6g. “This contribution will help us Donations can be made securely on harness the power of Shippensburg's the site, knowing 100 percent of network of social services, educadonations are staying local. tional institutions and business partThese efforts show what a sucners to meet the needs of community cessful collaboration between the members who have been affected by non-profit and private sectors can the global pandemic,” said Liz achieve to make our world a better Fisher, SCRC chair. Archive photo from 2019 place and bring help to those in “The SCRC has been working on SCRC members assemble Hound Packs, which are need. issues such as housing, health, and weekend meals for youth in the Shippensburg Area youth development since before the School District. About the SCRC pandemic. But the pandemic put a The Shippensburg Community spotlight on the need to address them quick- Learning Program. Resource Coalition (SCRC) is a local non“These are challenging times, and Volvo profit whose mission is to provide quality ly. Like Volvo, we are committed to promoting a healthy Shippensburg now and in the recognizes that many in our community are social services and youth programs that are future. We are excited that this new partner- impacted,” said Andy Williford, vice presi- accessible and safe and that recognize the ship allows us to expand our capacity to help dent, human resources, Volvo CE North dignity and worth of each person. They are a America. community members.” community partner who provides resources “Our employees are eager to engage in and helps individuals get connected with The partnership also is aiding SCRC’s food security programs that provide meals supporting SCRC and its mission to meet other non-profits. For more information, for youth in the Shippensburg Area School social needs created by COVID-19. We contact sp-scrc@shipresources.org. A curDistrict when school is not in session, believe building the world we want to live in rent list of COVID-19 community resources including Hound Packs and the Summer starts first among our neighbors. SCRC will also can be found on their website. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 13

(800) 872-2390 CONTACT JESSE WELLER USED@TRACEYROAD.COM SALE PRICE: $19,975

SALE PRICE: $49,990

SALE PRICE: $299,000

SALE PRICE: $52,900

ALBANY BINGHAMTON LOCATION: WATERTOWN, NY 2012 BOMAG BW120AD-4 • INV#130702CEG • 899 HOURS • 47” DOUBLE DRUM • 5,732LBS OPERATING WEIGHT • 34HP KUBTA SALE PRICE: $56,900

LOCATION: SYRACUSE, NY

LOCATION: SYRACUSE, NY

2011 VOLVO PF6110 ASPHALT PAVER • INV#129996CEG • 4,859 HOURS • 10FT TRACK • 47,614LBS OPERATING WEIGHT • 205HP, CUMMINS TIER 3

2016 RUBBLE MASTER RM90GO! • INV#83211CEG • 1,256 HOURS • PORTABLE CRUSHER, 200 TON P/H • REMOTE CONTROL • REFEEDING BELT

SALE PRICE: $164,900

SALE PRICE: $182,500

LOCATION: KIRKWOOD, NY 2006 SAKAI SV505D • INV#131242CEG • 2,713 HOURS • 84” SMOOTH DRUM • 23,525LBS OPERATING WEIGHT • 130HP, CUMMINS SALE PRICE: $84,900

QUEENSBURY ROCHESTER SYRACUSE UTICA WATERTOWN TRACEYROAD.COM

LOCATION: SYRACUSE, NY 2011 VOLVO SD70D • INV#131269CEG • 1,536 HOURS • 66” SMOOTH DRUM • 15,750LBS OPERATING WEIGHT • 99HP, CUMMINS SALE PRICE: $54,320

LOCATION: WATERTOWN, NY 2017 KOBELCO SK230SRLC-5 • INV#130600CEG • 1,019 HOURS • 56,400LBS OPERATING WEIGHT • AUX HYDRAULICS • SHORT RADIUS SALE PRICE: $102,910

LOCATION: SYRACUSE, NY 2017 KOBELCO SK270SRLC-5 • INV#130710CEG • 1,300 HOURS • 60,000LBS OPERATING WEIGHT • AUX HYDRAULICS • 48” DIGGING BUCKET SALE PRICE: $59,320

LOCATION: MARCY, NY 2013 HITACHI ZX135US-3 • INV#128228CEG • 3,489 HOURS • 31,147 OPERATING WEIGHT • HYD COUPLER/AUX HYD • RUBBER PADS SALE PRICE: $104,320

TRACEY FREIGHTLINER OF ALBANY IS A FEDERAL CERTIFIED

LOCATION: QUEENSBURY, NY 2011 KOBELCO SK140SR • INV#128996CEG • 4,705 HOURS • 93HP, TIER 3 • AUX HYDRAULICS • 36” BUCKET

LOCATION: MARCY, NY 2013 KOBELO SK170LC-9 • INV#130704CEG • 31,403 HOURS • 115HP, TIER 4I • 37,800LBS OPERATING WEIGHT • HYD THUMB/BKT

LOCATION: MARCY, NY

LOCATION: SYRACUSE, NY

2017 NEW HOLLAND W80C-HS • INV#138089CEG • 1,450 HOURS • HI-FLOW HYD • HIGH SPEED • 1,7YD BUCKET

2014 LIEBHERR L528 • INV#80442CEG • 1,034 HOURS • 3,14YD BUCKET/COUPLER • 24,030LBS OPERATING WEIGHT

WOMEN’S BUSINESS ENTERPRISE!

Page 14 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Now Is The BES ST Time To Buy A Doosan Crawle w r Excavator... ®

0

%A APR PR F FINAN INANCING NCING FOR F OR U UP PT TO O4 48 8M MOS OS *

OR O RO OP PT TIIO ON NA AL

NO P PAY PA AY A YMEN ENT 9 90 0 DA DAY D AY A YS FOR

FOR W WEL WELLELL-Q QUALIFIE AL LIFIE IFIED B BUYER UYERS F FO OR UP TO 3 34 4M MONTHS ONTHS*

ALLENTOWN 1315 Hausman Rd. HARRISBURG 6700 Allentown Blvd. SHIPPENSBURG 8001 Possum Hollow Rd. TOWANDA 183 Tomahawk Rd.

UNIONT N OWN 2266 University Dr.

WEST CHESTER 515 South Bolmar St.

STA ATE COLLEGE 140 Hawbaker Industrial Dr.

ION! KEYPORT, TIO ATI T NJ 275 Clark St. CAT OCA E LLO NEW

1-800-679-BEST • BestLineDoosan.com • Find Us On : * *Offers ends 06 /30 /2020. Available at participating and eligible dealers only. Offers may vary by product type, series, model and select units in dealer inventory. Offers available on new equipment in US and Canada only. Some restrictions apply. Length of contract may vary. Prior purchases not eligible unless notated in program information. See dealer for details. Financing provided on approval of credit by authorized Doosan Infracore North America, LLC finance providers to well-qualified buyers. Administrative fees may apply. Offer not available to government accounts, national accounts and municipal /utility bid customers. Doosan Infracore North America, LLC reserves the right to extend or discontinue any of these programs at any time without prior notice. Doosan® and the Doosan logo are trademarks of Doosan Corp. See participating dealers for details. Dealer not responsible for typographical errors. Photos for illustration purposes only and may not represent actual units. 2020 Impact Advertising • 20BLDO-NHC-CEG062420

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509

845/278-7766 Fax: 845/278-4431 E-mail: dan@wtractor.com

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT EXCAVATORS:

CHIPPERS:

2015 DOOSAN DX350LC-5, FULL CAB, QUICK COUPLER, 738 HOURS, 2 WAY PIPING ....................$225,000 2004 KOBELCO SK210LC, DYNAMIC ACERA, FULL CAB, THUMB, PLUMBED ................................................ ........................................................................................................................PRICE REDUCED $50,000 $55,000 2016 KUBOTA KX040, OPEN ROPS, RUBBER TRACKS, 2179 HOURS, HYD THUMB ..........................$34,995 2017 NEW HOLLAND E30B, CAB W/HEAT/AC, 36 HOURS, MANUAL COUPLER, 4 WAY BLADE, 24” BKT .... ....................................................................................................................................................................$46,995

2004 BANDIT 200XP, WINCH, 115 HP DEERE ENGINE, 4874 HOURS........PRICE REDUCED $17,500 $19,995 1998 DEERE 644E, 4YD, NO HIGH GEAR, 18,673 HOURS......................................................................$22,995 2015 DOOSAN DL250-5, 3.5 YD, JRB COUPLER, 650 HOURS..............................................................$135,000 2018 DOOSAN DL250-5, 3.5 YD, JRB COUPLER, 182 HOURS..............................................................$149,500 2018 NEW HOLLAND W50TC, 1 YD, HYD COUPLER, FULL CAB, 262 HOURS......................................$54,995

TRACTORS:

SCREENER:

WHEEL LOADER:

1994 FORD 5640 SLE TRACTOR, ALAMO BOOM & FLAIL HEAD, AB WITH AC/HEAT, 2WD, 2371 HOURS .. 2018 VIBROSCREEN SCM27 BOX SCREENER, 135 HOURS ..................................................................$29,995 ....................................................................................................................................................................$29,995 NEW VIBROSCREEN SCM40 BOX SCREENER, NO DPF, NO DEF ..........................................................$59,995 TLB’S: 2018 VIBROSCREEN SCM40 BOX SCREENER, 219 HOURS ..................................................................$51,995 2005 KUBOTA B26, ROPS, HYDRAULIC THUMB, 3325 HOURS ............................................................$21,995 2018 VIBROSCREEN SCM40C BOX SCREENER W/CONVEYOR, 123 HOURS ....................................$129,000 TRACTOR LOADER: NEW VIBROSCREEN SCM75C BOX SCREEN W/CONVEYOR, TIER 3 ENGINE ....................................$175,000 2016 NEW HOLLAND WORKMASTER 50, 4WD, 450 HOURS, 72” LOADER BKT..................................$27,500 NEW VIBROSCREEN SCM115T TROMMEL, NO DPF, NO DEF................................................................$150,000 SSL’S: 2018 VIBROSCREEN SCM115T TROMMEL, 257 HOURS, NO DPF, NO DEF..........................................$123,500 2016 KUBOTA SSV65, CAB HEAT & AC, PILOT CONTROLS, 378 HOURS ............................................$29,995 MISCELLANEOUS: 2017 KUBOTA SSV75, CAB HEAT & AC, PILOT CONTROLS, 172 HOURS ............................................$38,995 2017 BOMAG BW213D-4, CAB W/HEAT/AC, VIBRATORY ROLLER, 84” DRUM ROLLER, 64 HOURS $106,800 2018 NEW HOLLAND L220, CAB HEAT & AC, PILOT CONTROLS, 90 HOURS ......................................$40,995 2001 DEERE GT235 GARDEN TRACTOR, 48” DECK, SNOW PLOW, GAS ENG..........................................$500 2017 NEW HOLLAND L218, FULL CAB HEAT & AC, PILOT CONTROLS, 81 HOURS ............................$39,500 2014 DOOSAN DXB260 BREAKER, 8500 LBS, FOR DX350, HAMMER TOP FOR PIN GRABBER ......$35,000 2007 NEW HOLLAND L180, CAB W/HEAT, PILOT CONTROLS, HYD COUPLER, 2950 HOURS SOLD $19,995 ERSKINE 680X SWEEPER SKID MOUNT, HYD ANGLE, 68” WIDE ..........................................................$1,200 1997 NEW HOLLAND LX665, CAB W/HEAT, SOLID TIRES, 5911 HOURS................................................$7,995 1990 KUBOTA F2000 FRONT MOWER, 4WD DIESEL, 2770 HOURS........................................................$1,995 See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE

AT WWW.WTRACTOR.COM

1998 DEERE 644E WHEEL LOADER

2018 VIBROSCREEN SCM40

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 15

H.O. PENN IS THE T LOCAL SOUR RCE FOR ALL OF YOUR MILLING G NEEDS. VARIETY OF MILLIN MILLING NG EQUIPMENT WITH PM825 AN ND PM318 A AV VAILABLE FOR R DELIVERY TODA AY Y UNMA ATCHED AV AVAILABILITY AILABILITY WITHIN 24 HOU URS ON 99% OF PARTS PARTS HIGH QUALITY SER RVICE AT YOUR LOCALL BRANCH OR ON SITE

WWW.HOPENN.COM

8 844-CAT AT T-1923 -1923

Page 16 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

208 Holland Road Brimfield, MA 01010

Sales Contact: R.J. Poirier rjpoirier@rjpoirier.com 413-245-3882

Installation Resumes on $33M Water Main Replacement Project in Hoboken

Fax: 413-245-3522

www.rjpoirier.com

(2) 2015 CAT 988K, 9 Yd, High Lift, 50% Tires ..........CALL (2) 2016 CAT 980M, Agg Handler, GP, Low Hrs ..........CALL 2015 CAT 966M, GP Bucket, Low Hrs ........................CALL 2013 CAT 836H, CAT U-Blade......................................CALL (2) 2010 CAT 773F, Good Tires, Dual Slope ..............SOLD 2011 CAT D8T, 8U w/Twin Tilt, S/S Ripper ..................CALL 2012 CAT D9T, 9U w/Twin Tilt, S/S Ripper ..................CALL 2014 CAT D10T2, 10U w/Twin Tilt, S/S Ripper ..........SOLD

On June 15, the city of Hoboken, N.J., restarted installation of the first phase of its water main replacement project, which will replace a total of 15 blocks, or 7,035 linear ft. of Hoboken’s oldest water mains. Other upgrades include service lines to the curb box, curb to curb resurfacing, green/grey infrastructure, and complete street design. Construction on the eight segments of the project began in September 2019 but was paused from March through May due to the COVID-19 pandemic. Four segments of the water main rehab were finished by that time. Now, with work again under way, the city anticipates the remaining four water main segments will be completed in September. The $33 million project is funded through low interest loans from the New Jersey Infrastructure Bank (I-Bank) and does not use monies from the 2020 Hoboken municipal budget. There are more than 41 mi. of water mains in Hoboken. The age ranges of most of the pipes are from over 100

years ago until this year’s work stoppage. As a result of the aging pipes, Hoboken has long suffered from water main breaks and flooding. Pressure fluctuations, vibrations and seasonal changes in temperature, which often cause the cast-iron pipes to become brittle, can cause breaks. Just this past winter, city residents and businesses suffered several damaging water main breaks. When the installation work was halted in March, more than 4,500 linear ft. of new 8-in. ductile iron water main had been installed and 150 service lines replaced as part of Phase I of the project, the city said. Last July, the city entered into a new contract with the city’s water management provider, SUEZ North America, that aimed to facilitate upgrades. Under this 15-year contract, the city receives the $33 million in revenue to make system-wide infrastructure rehab through 2034, with an average of $2.2 million in water investments per year.

The Hoboken construction activities this summer include the following: • Bloomfield Street between Second and Fourth Street the week of June 15 for installation of approximately 1,000 linear ft. of new water main, followed by pressure testing and sampling of the new segment. • Garden Street between 12th and 14th Street for the placement of 810 linear ft. of new water main. • Monroe Street between 3rd Street and 4th Street — approximately 950 linear ft. • Monroe Street between 8th Street and 11th Street — approximately 1,400 linear ft. Milling and paving will commence immediately following the completion of installation of the newest water mains, services, and hydrants. In total, the paving duration for the first four segments was two to three weeks, according to the city of Hoboken. It is anticipated that one city block per day can be milled and paved this summer, with traffic striping to immediately follow. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 17

Tier 4 Final RTC-8050 Series II RTC-8065 Series II

75 RT

RTC-8090 Series II

100 RT

120 RT RTC-80130 Series II

RTC-80160 Seriess II

YOUR O #1 SOURCE FOR ROU UGH TERRAIN RENTALS A Ver e mont 802-658-1700 Masssachusetts 508-499-1950 Pennnsylvania 717-795-0700 N Yoork 315-676-2008 New

w .woodscrw.com www

BUY

•

LEASE

Lexington, Kentucky | www.linkbelt.com .

•

RENT

Page 18 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SEI, LeeBoy Support the Gary Sinise Foundation Together Stephenson Equipment and LeeBoy are putting together the first ever “Stars & Stripes” version of LeeBoy’s 8520B asphalt paver in support of The Gary Sinise Foundation. Over the past few months, Stephenson and LeeBoy have been compiling a significant donation in support of the Gary Sinise Foundation and its Emergency COVID-19 Combat Service Campaign. “We thought we can always do a little more” said Charlie Walsh, Stephenson’s EVP of sales and marketing, “so we worked with our asphalt equipment partners at LeeBoy on the stars & stripes themed paver as we approach Independence Day, the 4th of July. “LeeBoy was glad to join with us in the donation effort as well as many employees of both SEI and LeeBoy.” With the continued spread of the coronavirus (COVID-19) across the nation, the Gary Sinise Foundation has been providing grants to first responders in need of personal protective equipment when answering COVID-19 service calls. The foundation also is providing finanStephenson Equipment and LeeBoy cial assistance to healthcare profesare teaming up to make a “Stars & sionals, service members, veterans, Stripes” themed LeeBoy 8520B paver and make a significant donation to first responders and their families who The Gary Sinise Foundation and its have been impacted by the novel coroefforts to support the nation’s navirus. healthcare professionals, service For more information, or to donate, members, veterans, first responders visit https://donate.garysinisefoundaand their families who have been tion.org/StephensonandLeeBoy.  impacted by the novel coronavirus.

Analysis Finds Composite Plans Would Have Fared Better A new study released June 2 finds that composite retirement plans would have fared better during the coronavirus pandemic and related market declines than traditional defined-benefit multi-employer plans, allowing participants to receive higher benefits and attracting more employer participants. The study makes it clear that employees and employers stand to benefit once Congress authorizes the use of composite plans. “Composite plans are a voluntary approach with built-in guardrails to keep plans on track that would give plan sponsors a much-needed option as they look for ways to provide sustainable lifetime income to participants,” said the study’s author, Josh Shapiro of the Groom Law Group. “Our case study illustrates how the key composite plan features can provide greater long-term benefit security than current pension plans.” Composite plans are a retirement reform designed to provide benefit security through conservative funding principles and early corrective action. Unlike 401(k) plans that typically pay lump sums, composite plans pay all benefits as lifetime annuities, so participants do not need to worry about outliving their accounts and being left without a source of income. While these plans suc-

cessfully benefit millions of middle-class retirees across the developed world, they have not yet been authorized for use in the United States. “Composite plans are not a government mandate, but a voluntary option for trustees to consider as a tool to protect and promote the health of pension funds,” said Matt Aquiline, CEO of the International Council of Employers of Bricklayers and Allied Craftworkers (ICE). “And composite plans are a dependable and preferable option to evaluate when considering a plan conversion to a defined contribution plan.” “The composite plan model is a much more flexible, self-adjusting plan as compared with the traditional defined benefit plan model,” Timothy J. Brink, CEO, Mechanical Contractors Association of America, explained. “The composite plan calls for contributing employer investment of a 20 percent overfunding cushion, in exchange for greater flexibility in annual 15year funding projections. The composite plan model also calls for immediate remedies of small manageable problems before they devolve into the types of deep underfunding challenges traditional plans are experiencing now.” Brink added, “it’s much better for both

contributing employers and plan participants to be safe early rather than very sorry much later.” The new study, which was commissioned by a range of employer groups, was designed to evaluate how a composite plan would have performed during two recent economic crises, the downturn of 2008 and the more immediate coronavirus pandemic. The study found that while a multiemployer retirement plan that was certified in “critical and declining” status suffered significant financial setbacks that are likely to result in the insolvency of the plan despite the recent implementation of a 15 percent benefit cut, a comparable composite plan would have performed more successfully. The participants in a similarly situated composite plan would have experienced a 5 percent reduction in benefits applied immediately after the 2008 crisis, which, in conjunction with the higher funding target, returned that plan to solvency. “This new report makes it clear that composite plans offer workers the kind of security and stability that too many traditional multi-employer retirement plans promise but are unable to deliver,” said Stephen E. Sandherr, CEO of the Associated General Contractors of America. “Hard-working

construction professionals deserve a stable and secure retirement, and composite plans offer a superior path to providing that security.” “The current structure of defined benefit plans provided reliable income for many years, but that reliability is in grave danger for many plans,” said Anthony Darkangelo, CEO of FCA International. “Revitalizing the multi-employer pension system by creating a new type of retirement plan, such as composite plans, will provide adequate and reliable income in retirement to our members’ plan participants, along with ensuring contractors are not exposed to financial risks that jeopardize their businesses’ viability.” The study also found that composite plans will achieve greater long-term employer participation than traditional pension plans. That is because the composite plans provide employers with the cost predictability they need to be successful in their businesses. This greater participation, the study’s author concludes, will further enhance benefit security for retirees by allowing the plans to stay more financially stable. The attractiveness of composite plans is one reason that some of the largest construction unions support them. see COMPOSITE page 98

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 19

QUALITY USED EQUIPMENT 2014 DOOSAN DL250-3, STK# SR3046, 1650 HOURS, INCLUDES BUCKET AND HYD COUPLER

$96,950

2014 DOOSAN DL350-3, STK# SR2994, 3950 HOURS, INCLUDES BUCKET, AND COUPLER

$122,500

2014 DOOSAN DL250TC-3,

2014 DOOSAN DL250-3,

STK# SR3223, HOURS 1595, DOOSAN DL106 ENGINE, 6 CYLINDERS

STK# SR3468, 3200 HOURS, PRICED WITH BUCKET & HYDRAULIC COUPLER

$123,500

$89,995

2014 BOBCAT S650, STK# SR3062, 2610 HOURS, CLEAN MACHINE, 2 SPEED, HIGH FLOW, SJC INCLUDES BUCKET

2014 BOBCAT S570, STK# RU5274, 1120 HOURS, SEL JOYSTICK CONT,A31 PKG,HI FLOW HYD,ATTACHMENT CONTROL INCLUDES BUCKET

$24,500 $24,500

1569 US Route 9W •  Selkirk, NY 12158 (518) 767-9331

www.finkeequipment.com

Page 20 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.GroffTractor.com

Used Equipment

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... $121,053

2013 CASE EQ18595, NDM466798, 2 Speed E-Hcabcontrols, 2012 CASE 621F,SV185, STK # 652, cab w heat & airSN: w/ , 2012 CASE 621F , STK # 652, w/ heat & air, 3rd spool valve, cwt, ride control, ra dial tires, 307 3rd spool valve, cw wt, ride control, tires, 307 Canopy, Open cab interior (vinyl seat), Hyd coupler, Block heater,radial Performance hours ....................................................... ......... $121,053 hours ....................................................... $121,053 package, 605 hours............................................................................ $21,500

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053

• We can provide you with the world’s largest or smallest trench box or sh shoring horing system. system • Get high produ uction numbers while keeping yyour workers safe. • We will show you y how with our on-site supervission. • Contact us for the t world’s very besst shoring • We will deliver on time,

E

R

E

We’ll e bring it with our fleet of truckswhere you want it, when you want it. • We are told by our customers that “No one beats our service”... So don’t take our word for it, it just ask the peo ople who use our pro oduct.

RENT RENTA TALS T AL A LS S SAL ES SALES SER V IC E SERVICE REP PAIRS P AIRS A IRS S • See our Entire Linee • Call for Catalogs Including: ding: Rock Boxes • Road Plaates • MightyLite® • • Hydraulic Shoring •

Fa Factory & Corporate Office: 20 07 LAKE STREET (Route 32) 2) NEWBURGH, NY, 12550

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... $121,053

1 1.845.562.4477 7

Calll us for local Metropolitan New Yor ork, New ew Jersey and Connecticut Inquiries. s.

Factory Direct Stores: Fo New England: Maine, Vermont, For e New ew Hampshire p and Weestern NY State te Slide System with Portable Safety Rail Installed

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 2016 CASE SR240, EQ34487, hours .............................................. ......... $121,053 $121 SN: 053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 NGM419887, 1,586 hours...... $23,500 hours .................... ................................... $121 053 $121,053

For Parts Parts & & Service 800-33-GROFF(47 (47633) For Service Call CCall800-33-GROFF 7633)

Foor the Mid- Atlantic Region: Eastern Pa, So. Jersey Jersey,, Delaware, Maryland and Virginia i nia

506 Pulaski Highway Joppa, MD 21085

1.443.313.3461 O Phone on o ne us Or Toll T oll Free oll FFr Fre reee from ffr fro ro om anywhere: aanyywh wh h heere re: e:

See Our Website for a Comple ete Listing of Used Equipment for Sale S

w www.grof ftractorr.com .com www.GroffTractor.com

1.508.842.2822 Calll our Baltimore area location: on:

Call today! 800 0-33-GROFF(476 633)

M E M B E R

Call our Boston area location: n: 283 E Cherry Street Sh e sb , MA 01545 Shrewsbury

www.casece.com

©2015 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States HUK THU` V[OLY JV\U[YPLZ V^UL LK I` VY SPJLUZLK [V *5/ 0UK\Z[YPHS 5 = = P[Z Z\IZPKPHYPLZ VY HɉSPH[LZ

1-8 800 80 00 0-4 -4 407 07 7-4 -4 4674 4674 www w.americanshoring.ccom E-Ma Mail i us at: il t: ssales@americ les@americ s@americanshorring.ccom o

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 21

CALL US TODAY

I « n á‫ «ٳ‬Á0 IXz z!XzJ z USED EQUIPMENT CONTACT JIM TIRONE, USED EQUIPMENT MANAGER

‫׎ו׏חٳחחגٳ׎וד‬ h Á X « z 0 ‫ ۾‬I X à 0 ³ Á « 0 ª È X ¨ x 0 z Áِ ! x

I X à 0 ³ Á « 0 ª È X ¨ x 0 z Áِ! x DUNMORE, PA

KIRKWOOD, NY

WATERFORD, PA

ORCHARD PARK, NY

WILLIAMSPORT, PA

ROCHESTER, NY

2014 JOHN DEERE 850K

2016 BOMAG BW120SL5

‫ ו׏׎א‬x J á ‫ דٳ(וו׏‬

$

$

$

Stk# 15188, 3211 Hrs, PAT 159” Blade, Winch

Stk# 40817, 91 Hrs, 47” Dbl Drum, Kubota Water Cooler Diesel Engine

Stk# 41203, 163 Hrs, Single Drum, Smooth Drum

2018 JOHN DEERE 470G LC

2012 JOHN DEERE 135G

2016 HITACHI ZX300

$

$

$

Stk# 16309, 1640 Hrs, Triple Bar Grousers, 12’10” Arm, Aux Hyd, Cplr

Stk# 23626, 2289 Hrs, Mechanical Thumb, Long Arm, 28” Wide Pads

Stk# 31430, 3587 Hrs, Single Bar Grsrs, 12’4” Arm, HKX Aux Line Kit

2016 BOMAG BMP8500

‫ ו׏׎א‬x J á ‫ ד(ٳדג׏‬

‫ ה׏׎א‬RXÁ !RX ñæ‫׎׎ב‬n!‫ הٳ‬

$

$

$

Stk# 40964, 67 Hrs, Sheeps Foot Drum, Vibratory, Self-Propelled

Stk# 41200, 51 Hrs, 56” Single Smooth Drum Roller w/ROPS

Stk# 31276, 4950 Hrs, Aux Hyd, Cplr, Cntrl Pattern Select, Long Arm

2012 JOHN DEERE 410K

2014 JOHN DEERE 544K

2014 JOHN DEERE 624K

$

$

$

Stk# 23849, 4095 Hrs, 4x4, RC, Pilots, MP Bucket, Tilt Coupler

Stk# 23842, 7145 Hrs, Cab w/AC, Quick Coupler, Ride Control

Stk# 23877, 1797 Hrs, Cab w/AC, Ride Control, Front Diff Lock

145,000

34,000

80,000

SYRACUSE, NY

á 0 ¨ « È ( n ç « 0 ¨ « 0 ³ 0 z Á THESE BRANDS AND MORE!

271,000

90,000

165,000

®

25,000

75,000

100,000

«0zÁ XJ X« zِ ÁR0 XJJ0« ÁR0 X« zً ÁR0 x «0 ç È ³ à0

WE ’ R E YO U R R E N TA L HEADQUARTERS 58,000

72,500

105,000

Page 22 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Minimizing Risk: Manufacturers Share Best Practices Over the past several weeks, AEM has developed a list of best practices based on what many of our member companies are doing to keep operations open while minimizing the risks associated with the COVID-19 pandemic. For those looking to either reopen or scale back their operations in the coming months, here are some of the actions and initiatives that can be implemented and shared with suppliers and partners, so as to help ensure a successful transition. “We know our members are taking proactive measures to minimize the risks associated with COVID-19 and doing what they can to keep their employees and their families safe and healthy,” said AEM President Dennis Slater. “Many of our member companies are up and running and taking precautions, and many more will be back in operations soon. We encourage our members to reach out to each other to ask questions and share ideas as work resumes and the pandemic evolves.”

doorknobs, clipboard, pens, keyboard, monitors, etc. It is important to have clear signage reminding staff to wash hands, wipe down areas and to use hand sanitizer. Discontinue use of drinking fountains and/or provide no-touch water bottle filling stations and close off common areas that are not to be used during this time. • Show videos of proper hygiene and area cleaning techniques to reinforce expected procedures. Station monitors showing videos in areas to inform employees of expectation and cleaning techniques in break or cafeteria areas. • Ban community and shared food to promote a healthy working environment and guard against the virus spreading.

Communications • Provide ongoing and frequent communications with all staff, even globally, so leadership can communicate directly with employees, address rumors and share facts. This improves engagement and productivity among For those looking to either reopen or scale back their operations in the coming months, here are some employees, including those curManaging Risks • Understand your shift popula- of the actions and initiatives that can be implemented and shared with suppliers and partners, so as rently working onsite, those worktion to determine how many to help ensure a successful transition. ing remotely and/or those furemployees can work in a designatloughed. ed area while staying 6 feet apart. How This can include adding walk-through tem- areas to keep employees on track for social • Eliminate all non-essential meetings and many of your employees can safely practice perature scans for manufacturing and office distancing. Providing physical cues to show conduct essential meetings and trainings social distancing throughout the workday? employees. Individuals identified as having traffic patterns on stairs and allowing only online via electronic media options such as This includes looking at all facilities and a positive temperature should be sent to a one person per elevator are helpful. Some WebEx, GoToMeeting, Google Hangouts, thinking through areas, such as entrances medical area either onsite or at an offsite stairways can be designated for only up traf- etc. Make sure your IT team provides guidfic and others for only down traffic. Adding ance to employees on the best tools for your and exits, elevators, stairways, meeting location for further testing. • Set up teams and hold daily leadership floor markings to indicate where individuals organization and how to use those tools rooms, lunch rooms and break areas, locker meetings to share information and make can stand during production meetings, clear- effectively. rooms, etc. • Plan for appropriate personal protective needed decisions from the top. Set up appro- ly showing walking areas on the shop floor • Promote wellness via texts and social equipment (PPE) and the amount needed of priate teams to focus on key business areas and using signage in different languages for media to encourage employees to change each for your manufacturing facilities and and have these teams connect daily. Teams your employee base all can be helpful. their personal behaviors that make them • Implement distance checks and adjust more susceptible to contracting COVID-19. office environment. This inventory includes can focus on areas such as COVID-19 premasks and may also include proper gowns paredness, business continuity, operations, office areas to keep office employees sitting Frequent communication using social media internal communications, community rela- at a safe distance from their neighbors in and texting alerting systems can provide and face shields. cubes and in desks. Make sure chairs are sta- needed hygiene reminders and company • Make sure all employees working onsite tions/public relations, etc. tioned 6 feet apart in conference rooms and announcements and new procedure implehave travel permits/letters from the company so they can travel to work per the essential Onsite Facility, Office Procedures capacity numbers are prominently dis- mentation. and Space Planning played. Dividers or walls should be installed business rulings. It is important to be aware The current COVID-19 pandemic is hav• Set up procedures for entrances and exits for open concept areas and adjustments may ing a tremendous impact on the equipment of regulations and rulings of each state to help employees manage opening doors be needed to use new spaces for desks. Map manufacturing industry, its suppliers and where there are operations. • Provide guidance on employee and pub- and passing others in hallways and on stair- traffic patterns in the office areas using tape customers, as well as the agriculture, conlic transportation to keep employees safe and cases. This includes adjusting to allow only or floor markings to divide hallways and struction and utility sectors. protect them from bringing the virus to work one person to enter/exit at a time, creating indicate walking direction as needed. AEM’s top priority the health and safety and home. This requires reminders of social visual signs for social distancing and providof our member companies, their employees Hygiene and Disinfection distancing and disinfecting their seating area ing nearby hand sanitizers. Adding foot pulls and our partners. We hope that these best • Train staff on proper hygiene procedures practices for how to mange the COVID-19 on buses and trains, tips for disinfecting cars and forearm pulls to allow for easy, handand motorcycles, as well as avoiding car- free door openings will help to avoid touch- and expectation to minimize infections. pandemic will help our member companies ing door surfaces. Clean down and wipe all surface areas dur- protect the health of their employees, mainpooling and sharing rides. • Map out traffic patterns such as stair- ing a change in shift or workforce. This tain their productivity and get back to full • Implement thermal screening at entrances to minimize spreading the virus. ways, hallways and shop floor common includes anything touched, such as handles, operations in the coming months. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

Page 24 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Foundation Equipment

Sales

Rentals

Parts & Service

More than machines.

SOLUTIONS. 1 800 PILE USA / ecanet.com

Pittsburgh 412 264 4480

Jacksonville 904 284 1779

Toronto 800 760 0925

Philadelphia 610 626 2200

Boston 508 821 4450

Greensboro 336 854 1220

Washington, D.C. 301 599 1300

NY/NJ 732 528 5477

Milwaukee 262 345 5715

Authorized Dealer:

Wagman Heavy Civil to Build Rappahannock RiverCrossing

3:55 PM

Dinwiddie County-based road construction company Wagman Heavy Civil Inc. announced in late May that it had been awarded a $107 million contract to design and build the Interstate 95 Northbound Rappahannock River Crossing project in Stafford County, Virginia, just northeast of Fredericksburg. “We are excited to begin our work that will provide critical mobility and safety improvements on I-95, including the interchange at VA Route 17,” Greg Andricos, Wagman’s president and COO said in a statement. “Wagman looks forward to safely and expeditiously delivering this project through partnership with VDOT, City of Fredericksburg, Stafford County and all other stakeholders.” The project was awarded by the Commonwealth Transportation Board, which regulates and funds transportation projects in Virginia. The contract includes the design and construction of three general purpose lanes for I-95 North and a bridge across the Rappahannock

The contract includes the design and construction of three general purpose lanes for I-95 North and a bridge across the Rappahannock River. Wagman also is working on the $101.6 million I-95 southbound Rappahannock River Crossing project, just alongside the current northbound crossing.

River. Three existing lanes also will be converted into collectordistributor lanes (lower capacity lanes), with the goal to reduce con-

gestion. Wagman also is working on the $101.6 million I-95 southbound Rappahannock River Crossing project, just alongside the

current northbound crossing. That work includes the design and construction of three generalpurpose lanes for I-95 southbound,

converting three lanes to collectordistributor lanes, and a bridge to be built over Route 17. The new contract also includes three bid options: an extension of the auxiliary lane along the I-95 northbound general-purpose lanes, the reconstruction and widening of I-95's northbound collector-distributor lanes, and installing a sidewalk along the north side of northbound Route 17. Wagman anticipates that construction at the key crossing will begin this fall. Founded in 1902 and based in Pennsylvania, Wagman is both a heavy civil contractor and a fourthgeneration, family-owned company. Wagman specializes in designbuild, infrastructure, marine construction, modified concrete, grooving and grinding, and geotechnical construction services. In 2019, Wagman completed its $22 million project to replace a pair of bridges on I-95 over the Meherrin River in the southeastern Virginia town of Emporia. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 25

REDUCED PRICES!

SAVE TIME SAVE MONEY SAVE LABOR SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

(6) 2002 IR 185 CFM Compressors

(3) 1998 IR 525CFM Compressor

Mounted on IH 4700 Trucks ................Call for Prices

Mounted on 1998 Ford Truck ..............Call for Prices

2015 Caterpillar 314ELCR

2008 Caterpillar 320DL Hydraulic Excavator

Auxiliary Hydraulics, Coupler & Blade, 2100 Hrs ........ ....................................................................$112,500

Auxiliary Hydraulics, Coupler, Digging Bucket, Work Ready ............................................................$59,500

2013 Caterpillar 316EL

2007 Manitex 124 SX 30 Ton Boom Truck

INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

Aux. Hyd., Hydraulic Thumb, 3100 Hrs..........$97,500

124” Boom, 31’ Jib, 5100 Hrs, Mtd. on Sterling Truck, 22,000 Miles, Located CT..................$119,000

For more information contact Mike Pearl at 914.980.8890 or email mike@flangelock.com

Call or E-mail Mike Pearl

www.flangelock.com

914-980-8890 • equipmart@aol.com

EQUIPMENT WANTED

Page 26 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Reject Effort to Force Universal COVID Safety Standard on OSHA

Four locations serve Maryland, Delaware, Washington, D.C. and parts of Virginia, New Jersey, and Pennsylvania Elliott & Frantz can show you the latest Gradall models, including Series IV excavators with highway speed travel capability. Featuring AutoDrive™, these models integrate a 6-speed automatic transmission and a new transfer case for efficient, simplified travel as well as convenient jobsite repositioning from the upper cab. Gradall excavators also feature the job-proven telescoping, tilting boom that enables you to do more different jobs with just one machine – even under bridges and trees.

WWW.ELLIOTTFRANTZ.COM

Delmar, DE 302-846-3033 Jessup, MD 410-792-9134 King of Prussia, PA 610-279-5200 Manassas, VA 703-257-2381

Requiring the federal government to impose a single, emergency standard for coping with COVID-19 is misguided because workers are better protected from the virus by construction industry best practices rather than a rigid “one-size-fits-all” regulation. That is the central message the American Road & Transportation Builders Association (ARTBA) and industry allies delivered as part of a May 29 amicus brief filed in federal court. ARTBA and the other groups are asking the U.S. District Court of Appeals in Washington, D.C., to stop the request by the American Federation of Labor and Congress of Industrial Organizations (AFL-CIO), which is suing the Occupational Safety and Health Administration (OSHA) to force implementation of a universal safety standard. Specifically, these organizations want OSHA to implement within 30 days a universal “emergency temporary standard” for infectious diseases which would cover all employees and all industries in response to the current COVID-19 pandemic.

In their brief, ARTBA and other industry groups detail why a uniform standard is misguided, explaining that “guidance on how to maintain the spread of COVID-19 in the aviation industry would naturally be quite different from guidance directed at the banking industry, or the construction industry.” “Given the vast range of industries operating in the United States, the best approach for OSHA to effectively provide logical and valuable guidance would be to issue specific guidance tailored to each industry or, at the very least, each natural grouping of industries,” the brief states. ARTBA and industry allies note that at the very outset of the pandemic, the construction industry on its own adopted a plan that provides guidance and outreach to large and small contractors to address and minimize exposure to the virus. “This plan has been widely implemented throughout the industry and adopted by large and small contractors,” the brief states. For more information, visit www.artba.org. 

Paycheck Protection Program Improvements Will Save Jobs The chief executive officer of the Associated General Contractors of America, Stephen E. Sandherr, issued the following statement in reaction to the passage of the Paycheck Protection Program Flexibility Act of 2020: “This new law improves upon the original Paycheck Protection Program by extending the coverage period to 24 weeks, revising the ratio of percentage of expenses allowed to be forgiven up to 60 percent payroll costs and 40 percent nonpayroll, extending the maturity period for the loans from two years to five, and allowing loan recipients to defer payroll taxes through the end of 2020. Its enact-

ment will save many construction jobs and allow thousands of construction firms to remain in business. “Having fixed several problems with a measure designed to helped firms survive, it is time for Congress and the President to put in place measures to rebuild our economy. These measures include providing liability protection for contractors and other businesses that are taking steps to protect workers from the coronavirus, new infrastructure funding and measures to stimulate broader, private-sector demand for construction and development.” For more information, visit www.agc.org. 

Would you like your company featured in Construction Equipment Guide? If so, please contact us at:

editorial@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 27

F I N A N C I N G AVA I L A B L E 286 Central Ave., South Kearny, New Jersey 07032

800-255-5512 Phone 973-589-4100 • Fax 973-589-4811

E-mail: info@tes-inc.net • Website: www.tes-inc.net

2007 Kalmar DCE 140-6, 31,000 Lbs. @ 24” LC, Enclosed Cab w/Heater, CAT Diesel C6.6, Dana TE1300 Trans, 167” Triple Mast, SS/FP, 96” Forks .. ..........................................P.O.R.

2000 Manitowoc 2250, 300ton, Series III ctwt option, 260' boom, Cummins diesel, S/N: 2251051 ....................P.O.R.

2007 Manitou MT1745, 10,000 lb. capacity, 54’ max lift, repaint, enclosed cab ...... ..........................................P.O.R.

2001 Link-Belt RTC 8040 SII, 40-ton, S/N: F7J1-5291, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator.... ..........................................P.O.R.

1980 Manitowoc 4100W SII, 230-ton, S/N: 41649, 150' boom ................................P.O.R.

1999 Link-Belt LS248 HII, 200-ton, "C" ctwts, Ctwt removal system, 3rd drum, 200' main boom, 2 winch, S/N: H3I9-2238 ................P.O.R.

2007 Manitou M50-4, 10,000 lb. capacity, 4WD, 163” max lift w/ SS, enclosed cab, 48” forks..................................P.O.R.

2005 Manitex 1770C, 17- Ton, S/N 119511, 18,042 miles, Ford F750 210 HP CAT diesel, 23’ jib, 20’ wood deck ....P.O.R.

2008 Link-Belt RTC 8090, 90ton, 140’ main boom, 35’ – 58’ jib, 2 winches ..................P.O.R.

2009 Shuttlelift 3340B, S/N: 321134, 10.5-ton, Diesel engine, Independent outriggers, 13’-32’ boom w/12’-28’ jib, Block & ball, New York City swing lock ..............P.O.R.

2007 Demag AC200-1, S/N: 33167, 240-ton, Drive axle: 10x8x8, ZF automatic transmission, 6 cylinder diesel engine, 223’ main, 108’ jib ...... ..........................................P.O.R.

2007 Link-Belt 218 HSL, 110ton, 150’ main boom, “ABC” Ctwts, Block/Ball, diesel engine ..............................P.O.R.

Authorized Dealer

Page 28 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Ideal Choice For The Urban Jungle

1361 Conshohocken Rd., Plymouth Meeting, PA 19462

(610) 277-0100 USED TRUCK & EQUIPMENT SALES

KX040-4

KUBOTA COMPACT EXCAVATOR

Superior 4-ton muscle and clean engine performance make the KX040-4 the ideal choice for the urban jungle. The KX040-4 has the power and versatility to take on almost any task even in the toughest conditions. Combined with improved digging and lifting power, and smoother travel performance, it can get the job done right!

2011 Case 580N, 4x4, Ext, 2014 Freightliner Fassi Boom, 3 Available ..................Call for Prices 50,800 Miles ............................$89,500 ED!

C EDU

R

TEST DRIVE YOUR NEW KUBOTA AT MESSICKS!

717-896-7002

WWW.MESSICKS.COM

ABBOTTSTOWN

BENDERSVILLE

CARLISLE

ELIZABETHTOWN

HALIFAX

2013 Peterbilt 18-Ton Altec Crane, 2017 Cat 336F, w/Thumb, 385 Hrs .... 31,660 Miles ............................$99,500 ........................................Call for Price

Deacon Equipment Co. CALL: 888-233-2266 Located In: Bloomsburg, PA

New Morbark 3400XT Wood Hog CAT 800HP engine. Call for Price and More Details! Exclusive Morbark and Rayco Dealer

Visit: www.deaconequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 29

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

Page 30 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

City Requires Contractors to Develop Site-Specific Plans NYC from page 1

Melanie E. La Rocca. “As we restart the economic engine that is our construction industry, there is no excuse to abandon the social distancing and health measures that we know save lives. Our health and safety guidelines are crystal clear, and we will be out in force, sweeping every work site in the city, to ensure compliance.” “As we emerge from the COVID19 pandemic and rebuild as a city, we need all New Yorkers to continue taking public health measures to protect each other’s health,” said Health Commissioner Dr. Oxiris Barbot. “The precautions are in place to keep workers safe, and the health of our city depends on them being followed.” The newly released guidelines will apply to all construction activity in New York City during the ongoing COVID-19 public health emergency, until the state rescinds or amends its Executive Order and related guidance. Stop Work Orders previously issued by the department for noncompliance with the state’s non- “Construction is part of the foundation of New York City and will be critical to our economic recovery,” said Carlo A. Scissura, essential construction ban has been Esq. president & CEO of New York Building Congress. lifted. This does not apply to any sites that illegally continued work safety plan. even after they were issued a Stop Work • Safety plan(s) are conspicuously posted Order for violating the ban, and have outon site and include a copy of the submitted standing civil penalties. state affirmation. In addition to following the guidelines, • Properly completed and updated cleanemployers are also required to develop a ing and disinfection logs. site-specific health plan that is prominently • A communication plan for employees, visible on work sites. They will also be visitors and clients is on site. required to submit and display an affirma• Correctly completed and updated logs of tion to the state that they have read and every person who may have had close conunderstood the additional reopening requiretact with others on site to ensure effective ments as required in the NYS Interim contact tracing. Guidelines. During the first 30 days after construction To ensure compliance with these new activity resumed on June 8, the department health requirements, DOB inspectors will be will focus on educating and helping the conducting a safety inspection sweep of industry learn how to implement these new every permitted construction site in New procedures, while providing onsite guidance York City, and following up with additional on best practices to contractors and site safeperiodic checks of active work sites. The ty professionals. Initial DOB violations for public can also call 311 to report sites not noncompliance with these regulations, following COVID-19 safety measures for inspection. During these sweeps, our inspec- In addition to following the guidelines, employers are also required to develop issued during these first 30 days, carry no a site-specific health plan that is prominently visible on work sites. financial penalty. Following this 30-day tors will be looking for the following: period, subsequent violations will result in • Compliance with social distancing prohoists) occupied by only one individual at a financial penalties, and continued noncomtocols. Six ft. of distance should be observed washing stations. • COVID-19 safety measures signage vis- time, unless all occupants are wearing a face pliance may result in Stop Worker Orders between all personnel, unless safety or work ible to workers, reminding everyone to covering and the space is kept under 50 per- and additional summonses with accompanyfunctions require shorter distance. ing civil penalties of up to $5,000 for each adhere to all safety protocols while on site, cent maximum capacity. • Anyone on site, including workers, other • Fifty percent capacity signage must be offense. construction professionals and approved vis- including proper hand hygiene, physical disDespite the threat of such penalties, state itors, who are less than six ft. apart must tancing rules, appropriate use of personal posted within the cab and at each landing. and city authorities “have been good to work protective equipment, and cleaning and dis• A site safety monitor must be designated. wear face coverings. Maintaining this pracinfecting protocols. The role’s responsibilities include continutice at all times is highly encouraged. see NYC page 46 • Tightly confined spaces (e.g., elevators, ous compliance with all aspects of the site • Readily available hygiene and hand

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 31

Page 32 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

First-of-its-Kind Dashboard Tool Highlights Investment

States leveraged $31 billion in federal funds to advance $66.5 billion in highway improvements during fiscal year (FY) 2018, according to an interactive tool that for the first time provides the American public and elected officials a clear look at how and where each state invests its transportation tax dollars. Obtained through a Freedom of Information Act (FOIA) request, the American Road & Transportation Builders Association’s (ARTBA) analysis of Federal Highway Administration (FHWA) data displays information on more than 24,000 projects that moved forward in FY 2018. “This dashboard helps shift the conversation about federal highway investments from apportionment tables and obligation charts to specific outcomes and benefits,” ARTBA President Dave Bauer said. “Such transparency and accountability will help the American people better understand the value they are getting from infrastructure investments.” Nationally, nearly half of the projects — 45 percent — were for repair or reconstruction work on existing highways in FY 2018, according to “ARTBA’s Highway Dashboard: A 50-State Guide to the Benefits of Federal Investment.” Adding capacity (22 percent of funds),

planning, design and construction engineering (14 percent), new construction (4 percent), planning, environmental, research and administration (2 percent), bike and pedestrian facilities (2 percent), debt service (2 percent) and utilities (1 percent), are among the other featured categories. The dashboard allows users to visualize how each state deployed federal funds in a given year and features the top projects dating back to 1950. The ARTBA Highway Dashboard was compiled by the association’s chief economist, Alison Premo Black. The data is submitted by states as part of FHWA’s Fiscal Management Information System (FMIS). For more information, visit artbahighwaydashboard.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 33

REPO OSITION YOURSELF FOR THE FUTURE.

The Trimble® Siteworks Positioning System positions you fo or the future of construction. Spot issues and solve problems before they slow you down. Run full office softwarre pack ka ages, including Business Center - HCE and Micrro osoft Office, and work easily with data and 3D models in the field without carrying a laptop. Contact you o r SITECH dealer ffor or more inffor ormatio on and a demo. SIT S IIT TE T EC E C CH H Nor Nort No orttth he eas e ea astt as

YOUR CON NSTRUCTION TECHNO OLOGY YP PROVIDER SITECH NORTH S HEAST M ME, NH, VT MA, T,, RI, Upstate NY 8 855-748-3244 · www.sitechnortheast.com www

SIT S T CH TEC Alle A egh hen hen ny y

SITEC CH Metro oNorthe east

SITECH METRO S O NORTHEAST T,, LLC CT,, Lower NY CT Y, N NJ, Northern DE, Eastern PA PA 8 855-748-3241 · www.sitech-metronortheast.com www m SITECH ALLEGHENY S GHENY NE, Central and N d Western Western P PA, A, Northern WV 8 855-417-0290 · www.sitechallegheny.com www

Page 34 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cloud-Based Wearables Enhance Safety Management document road conditions and structural locations to meet the an app and social network that requirements of local governconnects U.S. construction workmental entities. After equipment ers, said “a product or platform is staged, project progress is that is geared toward the worker, monitored on a daily basis with not management, will be most the device. widely adopted and engaged “What drone technology is with, and therefore have the most getting better at is we can get impact.” where we want to go for shots of Three types of smart data colhigh-traffic areas,” Wolfe said. lection technology trending in the “We can also tell the drone to go construction sector right now — from corner to corner of the site drones, wearables and machine and capture 15, 16 photos from automation — are moving the the exact same location for conindustry forward in a big way. sistency every time the pilot flies. Contractors who have put these So, when the project manager is tools into the hands of their looking at the reports, he’s used employees are seeing success in to seeing the same angles and the field through increased safety, pictures all the time.” efficient operations and higher He said a drone pilot can instruct the drone to go to a cerproductivity. tain location and take photos of Providence, R.I.-based conall angles from the same spot. struction company Gilbane The result is a panoramic view of Building Company has successfully integrated wearables tech- Drone technology has gone beyond aerial photography, and is now being used to map construction sites the site captured from moments in time. Drones also can fly the nology with Triax Technologies’ to determine if structures on the site line up, site and shoot 15 or 20 minutes of Spot-r wearable device. Lori where materials are being stacked, where raw video footage. Back at the Peters, vice president of market- machinery is being staged. office, the best 90 seconds of ing for Triax, Norwalk, Conn., footage can be captured to highsaid Gilbane adopted Spot-r as a way to sup- and digital contact tracing, said light what’s going on at the site. Peters. The company’s Proximity port their safety culture. “Videos can then be personal“They are providing their workforce with Trace tags can be mounted on a hard ized with the client’s logo, a date a tool that enables them to take ownership of hat or worn on the body to alert workstamp of when it was taken, and site safety and contribute to the site safety ers with a visual and audible alarm the name of project for their when they are in close contact with culture.” clients,” he said. “It can then be another worker. used as a marketing tool.” “This is very effective in remindSafety on Your Sleeve Drone Brothers client, Kansas Wearables fall into three categories. ing workers to adjust their current dis- With wearables, such as Triax Tech’s Spot-r device, worn Mo.-based Ryan Visual wearables use optical aids in or on tance to a proper social distance of six as a clip, contractors get real-time data on job site City, Companies, likes to see a daily feet or greater,” Peters said. glasses, visors and hard hats to produce access, worker and equipment location, manpower, safebirds-eye view of the project site images. Tactile wearables increase the user’s “Additionally, each of these close ty incidents, and evacuation and muster procedures. under construction. Another strength and durability via an exoskeleton. contact interactions are passively colDrone Brothers client in Iowa Sensing wearables detect conditions, ana- lected and transferred to our cloudHigher Visibility uses the drone’s mapping feature to overlay based dashboard to facilitate contact trace lyze data and warn the employee of hazA clear picture of job sites, equipment and reporting should a worker become sympto- crew is what many contractors boil the use- a site plan to see if structures on the site are ardous situations Triax Tech’s Spot-r device provides con- matic or test positive for COVID-19.” fulness of drone technology down to. But lining up properly. “They want to know if a certain tree is still Wearables are one avenue by which smart aerial photography just touches the surface tractors with real-time data on jobsite access, standing or has been removed, or if power technology has become more visible on job worker and equipment location, manpower, of how the remote devices can be used. facilities are linking up,” said Wolfe. safety incidents and evacuation and muster sites. The technology is improving the “Most general contractors know they “From a reference point, they can deteramount of automated, real-time information have to be using drones on job sites,” said procedures. “Every worker is regularly trained to uti- contractors have access to, enabling them to Andrew Wolfe, pilot-in-command of Drone mine what is planned versus actual activity,” lize the Spot-r push button to report injuries, respond and react to the data to drive safer, Brothers, an aerial photography service he added. “They can take our map and overlay it on their site plan. This client has an 80incidents and hazards,” said Peters. more productive job sites, according to based in Troy, Mich. “They’ve been able to improve their injury Peters. Contractors gain actionable insights “If you asked them, 99 out of 100 general inch computer monitor in a trailer. The site is to streamline processes, and improve safety contractors and project managers would say over 150 acres, and they bring our map up response time by 91 percent. and productivity, she said. “They are also utilizing our points of ‘Yes, they’re great for taking pretty pictures on the monitor. They can walk up to the Another aspect of productivity, she added, of a job site.’ But I see their jaws drop when map, point out where materials need to be interest solution to identify if workers are accessing hazardous or restricted areas and is to see where the equipment that contrac- I talk with them and they realize, ‘I didn’t stacked, why structures are still standing. Spot-r EvacTags to enhance their evacuation tors need to be productive is located. know drones could do that. XYZ project They can communicate what’s going on at the site with the entire construction team.” “A lot of times we hear, ‘I needed a scafprotocols and monitor evacuation procewould have been a perfect site for that.’” Another client in Albuquerque, N.M., fold’ or ‘I needed some kind of a scissor lift dures in real time,” she added. In early construction phases, drones not used a drone map to track prefabricated One of the newest trends in wearable and there weren't enough on site,’ when in only aid in site selection, but also can chart curbs which were missing from a job site. technology, specifically in response to fact, a jobsite supervisor can see where that site conditions before construction equipsee TECHNOLOGY page 48 equipment is located because we can tag it.” COVID-19, centers around proximity alerts ment is brought in. Wolfe said clients will TECHNOLOGY from page 1

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 35

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Vogele Super 1900-3 Tracked Paver, Caterpillar D7E Track-type Tractor w/ 1:50 scale - $125 Pipe line configuration, 1:50 scale - $115

Caterpillar AP-1050 Asphalt Paver, 1:50 scale - $100

Terex 33-07 Quarry Truck, 1:40 scale - $125

Caterpillar 14M Motor Grader, 1:50 scale - $100

Case 850 Dozer, 1:35 scale - $50

Caterpillar 245 Excavator, 1:50 scale - $100

Bucyrus Erie 22B Dragline, 1:50 scale - $285

Allis Chalmers Forty-Five Grader, 1:50 scale - $75

Caterpillar 963K Track Loader w/Ripper, 1:50 scale - $85

John Deere 400D Articulated Dump Truck, 1:50 scale - $40

Caterpillar 323F Excavator w/thumb, 1:50 scale - $80

JCB TLT25D Teletruck High Lift, 1:35 scale - $40

JCB 467 WLS Articulated Wheel Loader, 1:50 scale - $75

Volvo L60H Wheel Loader, 1:50 scale - $75

Liebherr L522 Wheel Loader, 1:50 scale - $45

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 36 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kinsley Construction Founder Robert Allen Kinsley Passes Away at Age 79 Robert Allen Kinsley, of York Township, Pa., passed away peacefully at home on June 10, 2020, at 11:19 am. He was surrounded by his wife and family. He was the husband of Anne (Whalen) Kinsley. Born on Oct. 17, 1940, in Philadelphia, the son of the late Robert Wright Kinsley and the late Molly (Savin) Kinsley, he was a graduate of William Penn High School, and attended classes at York Junior College, Penn State York and the University of Baltimore. He received an honorary degree from York College of Pennsylvania. Mr. Kinsley began his career in the construction industry directly after his high school graduation in 1958, working for C. Joseph Deller of Dallastown, Pa. By the early 1960s, he had established his own lawn grading business. By 1967, Kinsley Construction was incorporated and shortly after entered the general construction field. He and his wife, Anne, grew and shepherded their business and their Robert Allen family together. He was especially Kinsley proud of their partnership growing the businesses with their five sons. He was known for his business mind, his quick wit and his unlimited energy. Under his leadership, the Kinsley family of companies grew to include construction management, general construction, specialty construction trades, real-estate development, property management, manufacturing and professional services. “We have lost an amazing leader,” said Robert A. Kinsley II, CEO of Kinsley Enterprises in a statement to company employees. “Bob was our founder, a visionary leader and man with unfailing energy. He cannot be replaced. There are no words big enough to describe the impact he had on so many of us. All of us will remember just trying to keep up with him when he walked across a job site.” Mr. Kinsley strongly believed he owed his success to his employees and his community. While day-to-day operations of the company were managed by Mr. Kinsley’s sons who “grew up” in the business, Mr. Kinsley was actively involved in business operations daily. Relationships were paramount to him, and he made it a priority to visit project sites as much as possible, according to a post on the company’s Facebook page. Mr. Kinsley served on numerous corporate boards including York Bank and Trust, Mercantile Safe Deposit and Trust Co., D&E Communications Company and Ruscilli Construction Company. Mr. Kinsley was known equally for his business skills and as a champion for civic and community involvement. He was a founding member of the Agricultural and Industrial Museum of York County. He also was a board member of Better York, the York County Community Foundation, the York-Adam Area Boy Scout Council, Junior Achievement

and the Chesapeake Bay Foundation. He served as the chairman of the board of trustees of the York College of Pennsylvania, the chairman of the South George Street Partnership and chairman of the York County Industrial Development Authority. Throughout his life, he was passionate about history and preservation. One of his proudest accomplishments was his founding and chairmanship of the Gettysburg Foundation and their work and partnership with the National Park Service to design and build a new museum and visitor center for the Gettysburg National Military Park. His leadership in Gettysburg has revolutionized the visitor experience and created a legacy to not only preserve the historic landscape but also to provide fitting education about the causes and consequences of the American Civil War for future generations of Americans. Even though Mr. Kinsley spent his career building and developing, he felt a strong responsibility to land preservation. He was a founding member of the Farm and Natural Lands Trust of York County and felt proud to have preserved thousands of acres of land in southern Pennsylvania and northern Maryland. In his personal life, Mr. Kinsley loved time in the fields and on the wooded trails of his farms; horseback riding, fish-

ANDERSON EQUIPMENT CO. 1000 Washington Pike, Bridgeville, PA 15017 412-343-2300 Pleasant Valley, WV 304-366-3075 South Charleston, WV 304-756-2800 www.andersonequip.com

TRACEY ROAD EQUIPMENT East Syracuse, NY 315-437-1471 Kirkwood, NY 607-775-5010 Henrietta, NY 585-334-5120 Adams Center, NY 315-788-0200 www.traceyroad.com

HIGHWAY EQUIPMENT COMPANY

“All of us will remember just trying to keep up with him when he walked across a job site.”

Zelienople, PA 724-452-7800 Dubois, PA 814-371-3600 McKean, PA 814-476-7755 Millstone Township, NJ 732-446-7600 www.highway-equipment.com

Robert A. Kinsley II Kinsley Enterprises

ing and hunting. He will be remembered for his unfailing love for animals. He was honored to serve for many years as a Joint Master of the Elkridge Harford Hunt Club. In addition to his wife, Mr. Kinsley is survived by sons, Patrick and his wife Carla; Jonathan and his wife Pamela; Christopher and his wife Jeri-Ann; Timothy and his wife Anne; and Robert and his wife Rebecca; 11 grandchildren; and six great grandchildren. He also is survived by his sisters, Anne Wagner, Debra Cooper and Elizabeth Ricklefs. He was preceded in death by his sister Marina Adams and his daughter-in law Tina (Hess) Kinsley. Donations in lieu of flowers may be sent to the Gettysburg Foundation, 1195 Baltimore Pike, Gettysburg PA 17325; or York College of Pennsylvania, 441 Country Club Road, York, PA 17403. 

ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon, NY 11704 631-643-2605 www.allislandequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 37

WESTCHESTER TRACTOR

BASCHMANN SERVICES, INC.

COMPANY WRENCH, LTD.

ROBERT H. FINKE AND SONS, INC.

Brewster, NY 845-278-7766 www.wtractor.com

Elma, NY 888-655-1101 www.baschmann.com

Williamstown, NJ 856-404-9618 www.companywrench.com

Selkirk, NY 518-767-9331 www.finkeequipment.com

Page 38 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Prinoth Panther Proves Its Mettle Way, Way Down Under By Giles Lambertson CEG CORRESPONDENT

Eric Steben traveled to the end of the earth — the southern end — to see how a one-ofa-kind tracked vehicle behaved under harsh conditions. The Antarctica laboratory proved the value of the specialized machine and the engineering expertise of Steben and colleagues. Some of the solutions derived from the experience still are being applied. Steben is director of engineering at the North American office of Prinoth, which is headquartered in Sterzing (Vipiteno), Italy. Over the past 60 years, the manufacturing company has ridden tracks to commercial success in the snow-grooming industry and in more recent decades has become a major player in the tracked utility vehicle market. It was the latter expertise that in 2018 attracted an order for the custom machine from officials of the Norwegian Antarctica station. Like all teams of scientists operating on the bitter cold continent, Norway’s Antarctic crew is supplied by ship via a temporary ice shelf port on the coast of Prinoth’s Director of Engineering at the North American office Eric Steben stands Antarctica, with shipped materials then in front of Panther vehicle in Antarctica. transported inland to its station. Prinoth was tasked with developing a vehicle that could of them is the way the undercarriage, the uneven terrain. And because the engine sits high on the frame, some Panther models can more efficiently and safely make that long- suspension system, is designed.” Instead of relying on small bogies to carry ford watery areas more than four feet deep. distance trek in wintry conditions marked by The smallest vehicle in Prinoth’s lineup of periodic 200-mph winds and months of tracks, the Panthers feature large wheels, either uninterrupted sunshine or total dark- compressible suspension components and tracked utility machinery is the Panther T6. high-torque sprockets that easily overcome That model is just 8 ft. wide and nearly twice ness. “For sure, this machine application is extreme,” Steben said from his office in Granby, Quebec, Canada. “Our experience in Eric Steben and the station staff Antarctica is telling us a lot.” in Antarctica. ******************* The learning experience actually began in Granby, where Prinoth engineers pieced together a new machine using tried-and-true components from existing Prinoth crawler carriers. As the process got under way, it soon became evident that existing platforms needed to be reimagined for this vehicle and a novel powertrain created. The Prinoth engineers had a stable of proven machinery from which to pull components and inspiration. The company’s Panther Series of tracked vehicles have identifying markers that attest to their being a family of machines. All are powered by Caterpillar diesel engines. All have truck-type chassis. All ride on an undercarriage of unusual design. “Our machines have several advantages,” Steben said, “and one

“Even when it is pretty cold there, with all the tinted glass of the cabin, it can be pretty warm inside. You almost need air conditioning.” Eric Steben Prinoth

that long. It can haul six tons, travel almost 10 mph and climb 60-degree grades. It is powered by a 143-hp. Caterpillar diesel engine, rides on rubber tracks and can be configured with either a one- or two-seat cabin. At the top end, Prinoth offers the T22, which has a payload of 23 tons. It’s 11 ft. wide and almost 30 ft. long, has a 400-hp. Cat engine and rides on hardened-steel tracks, the only Panther to do so. Weight is one reason for that, according to Steben. see ANTARCTICA page 50

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 39

GOT A LOT ON YOUR PLATE? DIG IN. Loaded with our rugged EPA Final Tier 4 (FTT4)/EU Stage IV PowerTech™ diesel engines, the 250G LC and 300 0G LC Excavators will fast-trrack your bottom line. Meetting stringent standards, THESE MACHINES DELIVER D THE BEST COMBINATION OF PERFORMANCE EF΂CIENCCY AND RELIABILITY WITHOUT SACRI΂CING POWERR OR TORQUE 0PTIMIZED HYDRAULICS YIELD MORE MUSCLE SO O YOU CAN GET IN GET DONE and get g on to thee next jjob. And if you’re y hunngry g y for even more product p tivity, y add anyy of the manyy available options and pile even more on your plate. CONNECTICUT

MAINE

NEW JERSEY

NEW YORK

NEW YORK

The W.I. Clark Company

Nortrax

JESCO, Inc.

Five Star Equipment, Inc.

Nortrax

Hermon, ME 207-947-6786

118 St. Nicholas Ave. South Plainfield, NJ 908/753-8080 800/241-7070

60 Paul Rd. Rochester, NY 585/235-3011

Clifton Park, NY 518-371-5111

Wallingford, CT 203/265-6781 Danbury, CT 203/775-1203 Plainfield, CT 860/546-4808 www.wiclark.com

DELAWARE JESCO, Inc. Middletown, DE 302/376-0784

MARYLAND JESCO, Inc.

Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 District Heights, MD 301/909-7799 Waldorf, MD 301/861-2323

Houlton, ME 207-532-6517 New Canada, ME 207-834-6701 Westbrook, ME 207-773-3777

MASSACHUSETTS Schmidt Equipment, Inc. North Oxford, MA 508/987-8786 North Billerica, MA 978/667-4345 Plymouth, MA 508/830-9997 No. Swansea, MA 508/379-9810 Springfield, MA 413/543-5595 www.schmidtequipment.com

1275 Bloomfield Ave. Fairfield, NJ 973/227-2221 800/321-8080 1790 Route 38 Lumberton, NJ 609/267-2020 888/217-0600 www.jesco.us

1653 NY Route 11 Kirkwood, NY 607/775-2006 284 Ellicott Rd. Orchard Park, NY 716/662-2191 6500 E Taft Road Syracuse, NY 315/452-4560

Gouverneur, NY 315-287-0703

NEW HAMPSHIRE Nortrax Pembroke, NH 603-225-2769

VERMONT Nortrax

JESCO, Inc. 497 Fishkill Avenue Beacon, NY 845/831-1800 800/724-0725 110 East Jefryn Blvd. Deer Park, NY 844-482-0910

Springfield, VT 802-885-6840 Williston, VT 802-658-2121 www.nortrax.com

PENNSYLVANIA Five Star Equipment, Inc. 1300 East Dunham Dr. Dunmore, PA 570/346-1701 46 Route 97 Waterford, PA 814/796-2663 2585 Lycoming Creek Rd. Williamsport, PA 570/494-4030 www.fivestarequipment.com

Plasterer Equipment Co., Inc. 2550 E. Cumberland St. Lebanon, PA 717/273-2616 800/225-4001 3215 State Rd. Sellersville, PA 215/258-5700 800/523-2209 400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790 640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001 www.plasterer.com

Page 40 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ABLE Equipment Rental of NY Opens New Location in West Chester, Pa. ABLE Equipment Rental Inc. of NY (ABLE) a supplier of construction equipment rentals, sales, service and parts, has announced the opening of its newest location in West Chester, Pa. Expanding its presence in the Philadelphia market, ABLE is combining its Norristown and Honey Brook, Pa., facilities into this new 40,000+ sq. ft. location. Located on 3 acres at 800 East Virginia Ave. in West Chester, Pa., the building (formerly leased to Schramm Inc.) is strategically positioned to service both existing and new customers throughout the greater Delaware Valley region. Operating as ABLE’s newest full line branch, the facility is just 35 miles outside of Philadelphia and is accessible to several major roads and highways including Route 202 and Route 3. The new location is ideal to service the Southeast Pennsylvania area and is well situated to deliver equipment throughout the region, according to the

Located on three acres at 800 East Virginia Ave. in West Chester, Pa., the building is strategically positioned to service both existing and new customers throughout the greater Delaware Valley region.

ATS Equipment, Inc. 33 Locust Street Boston, MA 02125 617-825-3600 487 Washington Street, Route 20 Auburn, MA 01501 508-832-8500 51 Fall River Avenue Rehoboth, MA 02769 508-379-6200 ww.atsequipment.com

company. “We researched and toured several properties in the area before committing to the facility,” said Chris Pera, ABLE’s chief operating officer. “From a business point of view, it makes perfect sense for ABLE to operate out of West Chester, Pa., because of its strategic location to the Philadelphia and Wilmington, Delaware, markets. The physical building itself is an ideal fit

for the type of business we’re in.” ABLE purchases its equipment from the industry’s leading manufacturers and continues to add to its fleet. Equipment is available for daily, weekly, monthly and long-term rentals. There also are equipment financing plans available for new and used equipment. For more information, visit ableequipment.com. 

Jumpstarting the COVID-19 Recovery: Manufacturers, Investment Play Key Roles By Kate Fox Wood AEM SENIOR DIRECTOR, GOVERNMENT RELATIONS

Equipment manufacturers, now more than ever, are doubling down on efforts to communicate to lawmakers about the important role federal infrastructure investment should play as part of our national economic recovery from the coronavirus pandemic. At the outset of the coronavirus pandemic in the United States, AEM sent a letter to President Trump and Congressional leadership urging them to include infrastructure investment in a government relief package. AEM supported an effort to provide additional emergency funds for state departments of transportation facing severe revenue shortfalls. AEM Chair Jeffrey Reed and CE Sector Board Chairman Rod Schrader wrote directly to U.S. Transportation Secretary Elaine Chao about the importance of her leadership in ensuring Congress follows through with infrastructure investment this year.

All Island Equipment 39 Jersey St. West Babylon, NY 11704 631-643-2605 www.allislandequipment.com

AEM played a key role in the release of a national rural roads report issued by TRIP that has been shared widely with policymakers. During dozens of calls with lawmakers in the U.S. Senate and U.S. House of Representatives, equipment manufacturers have reiterated their commitment to keep facilities open while keeping their employees safe, and acknowledged the important role they play in supporting the nation’s critical essential infrastructure workforce like construction, utilities and agriculture. Equipment manufacturers also continue to make a strong case for why infrastructure investment should be a key part of any COVID-19 economic recovery plan. There is a proven track record for predictable, long-term infrastructure investment in providing jobs and boosting economic activity. Infrastructure investment ensures critical supply chain needs can continue to be met now and in future. We cannot assume that supply chain dis-

ruptions will not develop further down the recovery timeline. Our country must be ready to weather unforeseen headwinds. U.S. roads, highways, bridges, ports, waterways, utility systems and broadband networks must be primed and ready to adapt. We need infrastructure legislation that is bipartisan. We need infrastructure legislation that includes a plan to train a workforce that maintains and operates these important networks. We need infrastructure legislation that embraces the use of smart technology. And we need infrastructure legislation that is fully funded and long-term. As policymakers chart a path forward during these uncertain times in our nation’s history, one thing is clear: meaningful investment in infrastructure is as important as ever. Equipment manufacturers look forward to advancing this goal, and continuing to support industries that build, feed and fuel the world. For more information, visit www.aem.org. 

Baschmann Services Inc. 1101 Maple Road Elma, NY 14509 888-655-1101 www.baschmann.com

Chappell Tractor 454 Route 13 South Milford, NH 03055 800-698-2640 251 Route 125 Brentwood, NH 03833 800-616-5666 391 Loudon Rd. Concord, NH 03301 800-358-6007 www.chappelltractor.com

Highway Equipment Company 615 State Route 33 Millstone Township, NJ 08535 732-446-7600 www.highway-equipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 41

Contractors Sales Co. Inc. 121 Karner Road Albany, NY 12212-2010 888-468-5479 1283 Dolsontown Road Middletown, NY 10940 845-956-0222 www.contractorssales.com

Elliott & Frantz, Inc. 450 E. Church Rd. King of Prussia, PA 19406 610-279-5200 Jessup, MD 410-792-9134 Hagerstown, MD 301-733-8100 Harrisburg, PA 717-652-5430 Delmar, DE 302-846-3033 www.elliottfrantz.com

Medico Industries 1500 Highway 315 Wilkes-Barre, PA 18702 570-825-7711 www.medicoind.com

Dealer Im mprint Area

Tracey Road Equipment, Inc. Syracuse 6803 Manlius Center Road East Syracuse, NY 13057 800-872-2390 Binghamton 1523 Route 11 North Kirkwood, NY 13795 800-370-9488 Watertown 19598 Cady Road (Exit 44-Watertown Center off I-81) Adams Center, NY 13606 888-335-0200 www.traceyroad.com

Westchester Tractor 60 International Blvd. Brewster, NY 10509 845-278-7766 www.wtractor.com

Page 42 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Positive, Objective Approach to COVID Va.’s CTB Awards Pays Dividends for Elliott Equipment Co. $18.2M Contract to A little bit of positivity can go a long way during the most trying of times. The way Jim Glazer sees it, the COVID-19 pandemic has presented a seemingly never-ending set of challenges and opportunities over the course of the last few months. However, in taking an objective approach to COVID-19, planning appropriately and — most importantly — viewing ever-changing circumstances through a positive lens, Glazer and his employees at AEM member company Elliott Equipment Company (Elliott) have been ready for whatever has come their way. “Our approach to COVID-19 has brought our team closer together, and we’ve been willing and able to work closely with one another and make adjustments along the way,” said Glazer, the president and CEO of the Omaha, Neb.-based manufacturer of telescopic truck mounted aerial work platforms, cranes and digger derricks. “The way we see it, there are challenges and opportunities, not problems. And looking at [the pandemic] that approach has served us well.” Dealing With Disruption While Glazer readily admits Jim Glazer COVID-19’s impact on his company has been “disruptive to say the least,” Elliott’s leaders have remained steadfastly focused on ensuring the safety of its employees and customers. Whether it has been complying with Centers for Disease Control (CDC) guidelines, embracing social distancing, facilitating the ability for certain employees to work remotely, using masks on the shop floor, or establishing new cleaning and sanitizing practices, Glazer and his colleagues are doing whatever they can to help slow the spread of COVID19, all while continuing to be as productive as possible. “We’ve been working throughout the pandemic as an essential business, and Nebraska has been more open that most states,” said Glazer. “Like a lot of other AEM members it’s made planning different for us because there’s such a wide range of potential scenarios for us to account for.” A willingness to work together in an effort to overcome challenges, along with remaining steadfastly focused on supporting employees and customers, has allowed Glazer and his fellow leaders at Elliott to find some silver linings amidst the uncertainty brought on by the COVID-19 pandemic. “We’ve really tried to embrace and use new technology with our teams, like videoconferencing, and we’ve also used some of our time to conduct some extra training with our employees,” he said. “It’s also allowed us some time to refine some things related to how we go to market and who we go to market with. We’ve been able to do a lot of things in a very condensed time because of the minimal amount of

distractions.” Staying ‘On the Same Page’ It’s no secret effective communication has been a critically valuable tool for organizations of all types and sizes during the ongoing pandemic. According to Glazer, all-company meetings have helped Elliott’s leaders stay on the same page with employees, while newsletters and other written communications have allowed the organization to share important information with customers and distributors alike. Remaining in touch with its workforce also has allowed company officials to gain feedback from employees about how they’re navigating the pandemic. “It’s been both good and bad,” said Glazer. “On the good side, people have really enjoyed having some more free time and being able to share it with family. When there is such a significant shift in in your life, there are really things that come about that you may have taken for granted in the past. I think that’s what happened here. But overall, I think people are quite anxious to return things to normal.”

Widen Fairfax Pike

Virginia’s Commonwealth Transportation Board (CTB) has awarded an $18.2 million contract to General Excavation Inc. of Warrenton, Va., for the widening of Fairfax Pike (Route 277) in Frederick County, located in the state’s northwest region. The CTB regulates and funds transportation in the Old Dominion State and oversees the Virginia Department of Transportation (VDOT). Construction activities will extend just east of the Interstate 81 northbound ramps at exit 307 to Double Church Road (VA Rt 641). Fairfax Pike will be widened to four lanes with a median from where the road transitions to two lanes at the project. Portions of the Fairfax Pike median will be raised, and other parts of the median will be striped to provide turn lanes. The construction zone is in Stephens City. The total estimated cost of the Fairfax Pike project, including preliminary engineering, right of way, and construction, is $42 million. The three-quarters of a mile-long stretch of road work has a fixed completion date of June 1, 2023. SMART SCALE funding of $30,723,571 was allocated by the CTB in 2016 to this project. Besides the road widening, the project also will include various other intersection improvements: • On the west side of the project congestion, traffic flow will be improved on Fairfax Pike at the I-81 northbound on and off ramp intersection. • To the north of Fairfax Pike, Route 647 (Aylor Road) will Getting Back to Work be relocated to the east to align with Route 1085 (Stickley And what is “normal” at this Drive). This moves Aylor Road away from the I-81 northpoint? It’s really anybody’s guess, bound off ramp intersection with Fairfax Pike. but Glazer said it involves being • On the south side of Fairfax Pike next to the I-81 northable to make sure people can be as effective as possible while bound off ramp, the traffic signal at Route 1012 (Town Run on the job. “I think people appreciate going to work,” he continued. Lane) and Fairfax Pike will be removed. This helps free traf“It really does give people a sense of normalcy, and they are fic flow at the I-81 northbound off ramp intersection with able to see and socialize with the people they work with. All Fairfax Pike. • The new Stickley Drive intersection with Aylor Road the technology and videoconferencing is great, but there’s will have right and left turn lanes on to Fairfax Pike. Access really no substitute to being face to face.” While it’s difficult for anyone to truly know what the controls will be provided on both Stickley Drive and Aylor future holds as it relates to navigating the ongoing COVID- Road. 19 pandemic, Glazer said he and his colleagues at Elliott are • A five-foot-wide pedestrian sidewalk will be constructed staying true to their values of safety, customer satisfaction, on the north side of Fairfax Pike between the Interstate 81 culture and sustainability. northbound entrance ramp and Double Church Road. “The biggest challenge has been the degree of uncertainty • A 10-ft.-wide shared use path will be constructed on the in the environment,” said Glazer. “Things are changing way south side of Fairfax Pike between Stickley Drive and faster and more broadly than normal. Trying to piece all of Double Church Road. the moving parts together and understand what’s going on — Additional project work includes construction of a storm without ever really stopping — has been the most challeng- water management basin and some utility relocation. ing thing for us.” The completed project on Fairfax Pike will increase traffic That said, the Elliott President and CEO remains opti- capacity, enhance operational safety and improve the conmistic about the future of both his company and the equip- nectivity of the regional roadway system.  ment manufacturing industry overall. “As the situation evolves, everyone is learning and adapting as we continue to go down the road,” said Glazer. “And, Visit CEG’s Web Site at I think as things really start to open up, people will just get more and more confident about heading out and getting www.ConstructionEquipmentGuide.com everything going again.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 43

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Absolute Equipment

www.absoluteequip.com PENNSYLVANIA Pittsburgh (412) 931-6655 (866) 931-6655

Hoffman Equipment www.hoffmanequip.com NEW JERSEY Piscataway (732) 752-3600 Middlesex (732) 377-4130

Deptford (856) 227-6400 NEW YORK Bronx (718) 822-1180

Marlboro (854) 236-3000

Highway Equipment & Supply Co. www.hwyequip.com PENNSYLVANIA Drums (570) 788-1127 Harrisburg (717) 564-3031 Ephrata (717) 859-3132 Lock Haven (570) 769-1070

Tyler Equipment Corporation

www.tylerequipment.com

Walter S. Pratt & Son

CONNECTICUT Berlin (800) 352-4473 Parts: (860) 356-0848 Fax: (860) 828-6727 MASSACHUSETTS East Longmeadow (800) 292-6351 Parts: (877) 255-6351 Fax: (413) 525-6840

Medford (631) 207-2900

PENNSYLVANIA (610) 363-9200

©2019 Doosan Portable Power. All rights reserved.

MAKE POWER MOVES.

www.prattandsons.com NEW YORK Rensselaer (Albany) (518) 465-1549

Washington Air Compressor Rental Co. www.washair.net MARYLAND Frederick (301) 662-7711

Hyattsville (301) 277-1300

DISTRICT OF COLUMBIA Washington (202) 635-1500 VIRGINIA Chantilly (703) 742-6200

Page 44 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HE-equipment.com

877-HE-CRANE Baltimore, MD 410-477-6500

Roanoke, VA 540-362-3600

Ashland, VA 804-798-9740

Warrenton, VA 540-349-2878

Norfolk, VA 757-295-4944

www.hoffmanequip.com

22 Peconic Ave. Medford, NY 11763 631-207-2900 1144 Zerega Ave Bronx, NY 10462 718-822-1180 1330 Hurffville Rd. Deptford, NJ 08096 856-227-6400 1440 Route 9W Marlboro, NY 12542 845-236-3000

Manitowoc crawler c cranes are built to o deliver unsurpassed productivity and a value on the most ch hallenging jobsites. Manitowoc delivers: Cranes ranging fro om 73 t (80 USt) to 2300 t (2535 USt) Capacity-enhancin ng VPC-MAX® technology and ® MAX-ER attachm ments

He H eigh ht ab bov ve g groun o nd m

300 South Randolphville Rd. at Route 287 Piscataway, NJ 08854 800-446-3362

60,0

60 56

54,0

52 48,0

48 44

42,0

40 36,0

36 32

30,0 0

28 24 20

Optional long-reac ch booms, fixed jibs, luffing jibs and extended upper bo oom points

16 12

8,24 m TAILSWING TA

New 3.5 m wide bo oom inserts for MLC300 and MLC650

333 Cedar Avenue Middlesex, NJ 08846 732-377-4130

1,,52m 2,67 m

12

20

28

36

44

52

60

Access current Manitowoc crawler crane load charts at www.cranelibrary.com

120 Gordon Drive Lionville, PA 19341 610-363-9200

www.shawmutequipment.com

20 Tolland Turnpike Manchester, CT 06042 800-829-4161 136 Eastman St. South Easton, MA 02375 877-526-9213 Shawmut Equipment of Canada, Inc. 318 Park Road Elmsdale, NS B2S 0G2 902-883-7450

www.stephensonequipment.com

Philadelphia, PA 800-220-4033

Pittsburgh, PA 800-692-7600

Harrisburg, PA 800-325-6455

Syracuse, NY 800-368-6455

Wilkes-Barre, PA 866-667-6756

Albany, NY 518-357-2200

68

Manitowoc MLC650 — features the ne w 3.5 m w id e b o o m s y s t e m t o r e a c h h ig h e r a n d increase capacit y.

w www .manitowoc.com

7

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 45

Danbury, CT 203/743-0088 Newington, CT 860/665-7470 Laurel, DE 302/715-5382 Baltimore, MD 410/247-2100 South Plainfield, NJ 908/561-9000 Winslow Township, NJ 856/767-5900 Holbrook, NY 631/563-7600 Holmes, NY 845/878-4004 New York City, NY 718/626-3331 Pine Bush, NY 845/744-2006 Yonkers, NY 914/738-5100 Frackville, PA 570/874-6140 Harrisburg, PA 717/652-3190 Hatfield, PA 215/822-0145 State College, PA 814/308-5660 Wilkes-Barre, PA 570/824-9891

www.cn-wood.com Avon, MA 508/584-8484 Woburn, MA 781/935-1919 Whately, MA 413/665-7009 Johnston, RI 401/942-9191

www.andersonequip.com PENNSYLVANIA Pittsburgh, PA 412/343-2300 Clarion, PA 814/226-4100 Clearfield, PA 814/765-5311 Somerset, PA 814/443-2867 NEW YORK Buffalo, NY 716/877-1992 Henrietta, NY 585/334-6770 Syracuse, NY 315/463-8673 Albany, NY 518/785-4500 Watertown, NY 315/788-5512 Endicott, NY 607/748-3400 Olean, NY 716/372-8822 NEW HAMPSHIRE Lancaster, NH 603/788-6595 Manchester, NH 603/627-7696 MAINE Bangor, ME 207/942-0177 Gorham, ME 207/591-5482 VERMONT East Montpelier, VT 802/223-9689

“THEY JUS ST WORK BETTER! W A TRUSTEED NAME. “At Selge Constrruction, we’re a family business. s. We’ve a wide range of projects, built on a foundation of integrity knowledge and qquality workmanship. Selge hass gained respect throughout the Midwest for the highest quality work built in the safest way possiible. Komatsu builds a quality product that performs as prom mised and helps us get the job done. That’ Th why Komatsu works orks for me!”

Marv Selge ge / Selge Construction, Inc. / Niles, MI

That’s t s why hy I am K Koma matsu ts komatsuamerica.com

035 © 2019 Komatsu America Corp. All Rights Reserved

Page 46 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Empire State ABC: Industry Has Always Put Safety First NYC from page 30

with,” according to Brian Sampson, president of the Empire State chapter of Associated Builders and Contractors. “They understand the economic impact of construction in their jurisdictions. In New York City, annual construction volume is about $45 billion. When you see one construction worker, there are four or five behind supporting them. Officials really don’t want to put a clamp on all that economic activity.” For instance, he said, the social distancing guidelines recognize “there are certain tasks in the industry — pouring concrete, wiring a box in a closet and so on — where workers must work close together. So, authorities are working with the industry, acknowledging there are work situations where workers must be closer than six feet apart.” All in all, disruptions from the guidelines are fairly minimal, according to Sampson, because many of the rules from the DOB “were already in place. New York City construction is very different from in other parts of the world. It is a very vertical market here. When the virus first started to settle into the city, many contractors started to social distance and wear masks and take temperatures of workers They already had this in place before the Department of Buildings issued

its guidelines. They just gave it a thumbs up and said, ‘Fine. We’ll just keep doing what we were doing.’” There is, of course, a financial impact on contractors who must post signage and space workers and procure masks. “There obviously are added expenses,” Sampson said, “but project owner companies largely have been flexible about the added costs. This industry always has put safety on a high level.” As for the construction workers, he said “the biggest issue they are grappling with is the mayor’s requirement to have a cloth covering the face at all times. Getting people to comply with that and keep their masks on is difficult sometimes. But the crew members understood when they returned to work that there were different protocols in place. They are doing what they need to do and are becoming comfortable being back on the job.” The issued COVID-19 guidelines are the minimum requirements for sites to operate safely. The DOB said owners are welcome to implement enhanced safety measures as they see fit to protect their workers. To protect its teams out in the field, all DOB personnel will continue to wear gloves and masks while in public and

its offices will be reconfigured to promote social distancing. “As we pursue reopening, we must remain conscious of the steps we need to take to keep ourselves, our families and our communities safe,” said Council Member Robert E. Cornegy, Jr., chair of the committee on housing and buildings. “I welcome the Department of Buildings COVID-19 safety guidelines and the plan for inspections to ensure worksites reopen safely. Innovating, adapting, and making timely adjustments have all been important features of DOB’s response to the this crisis. As we reopen, DOB must continue to take that same thoughtful policymaking and on-theground follow up forward.” “The health and safety of all construction workers is our number-one priority, and as such, the building trades, union contractors, and the real estate community are working hand-in-hand with the department of buildings to ensure that workers can return to construction sites in a safe and healthy manner,” said Gary LaBarbera, president of the Building and Construction Trades Council of Greater New York; Louis J. Coletti, president and CEO of the Building Trades Employers’ Association; and James Whelan, president of the Real Estate Board of New

York. “Construction has jump-started New York’s economy in the past, and we’re confident that this time around will be no different.” “Construction is part of the foundation of New York City and will be critical to our economic recovery,” said Carlo A. Scissura, Esq. president & CEO of New York Building Congress. “The health of our workforce is paramount, and as all sites reopen across the five boroughs, it is essential that they operate in a safe manner. We look forward to continuing to work with Commissioner La Rocca and her team. Once again, the building industry will lead the way in helping our city progress.” “The COVID-19 pandemic has emphasized the critical need for leadership commitment to construction worker safety and health by every contractor in New York City,” said Sampson. “Our members have been well ahead of the curve by evaluating and mitigating the risks associated with COVID-19 on job sites every day. We look forward to working with the department of buildings to move toward a permanent paradigm shift that raises the bar on safety and human health and hygiene protocols on construction job sites in the months and years to come.”  CEG Staff

New Enterprise Stone & Lime Leads Reconstruction Work NORTHUMBERLAND from page 8

Some work is being performed in the evening. Some phases have work 24 hours per day. Some work is performed on weekends. Various utilities have had crews working throughout the project. “The schedule was developed to minimize impacts to residents, businesses and the traveling public,” she added. “The prime contractor [has] also had various crews working at different locations throughout the project.” Prime contractor New Enterprise Stone & Lime Inc., based in New Enterprise, Pa., brought in pavers, rollers, a variety of excavators, loaders, skid steers, dump trucks, Gradalls, backhoes, trucks, survey equipment, graders, light plants and other equipment. The most unusual piece of equipment, Baker said, is the three-wheel roller that was used as the break-down roller for paving, due to a “no vibration” clause in the contract. Materials used on the reconstruction project include: • 20,000 tons of subbase • 1.4 mi. of various sizes and types of pipes • 3.5 mi. of concrete curb • 10,000 sq. yds. of geocell

• 5,000 tons of SMA (Stone Matrix Asphalt) • 10,000 tons of WMA Binder, 19 mm • 21,000 tons of WMA Base Course, 25 mm • 4,000 sq. yds. of concrete pavement “The subgrade was very unstable under the existing roadway,” Baker said. However, she added, an underground utility was located close to the bottom of the pavement package. Geocell filled with aggregate was used to strengthen the subgrade prior to paving in many locations throughout the project where typical undercuts with geotextile and rock backfill were not feasible due to the depth between the top of the utilities and the bottom of the pavement. “Underground utilities were often in conflict with the proposed roadway drainage.” Challenges Coordinating work schedules between the contractor, so many subs and the utilities was challenging while working in “short work areas,” Baker said. “Communication was key to the success of the project.” Project updates were communicated via: • Weekly press releases • Project website

• Live radio talk show interviews • Regular attendance at borough council meetings, local chamber of commerce meetings, • Customer concerns through an 800 hotline and email • Community roundtable meetings • Annual project start-up meetings with the community Meetings between PennDOT, the contractor, subcontractors, utility companies and the designers were held weekly during construction season and bi-weekly on the off-season to ensure schedules were met and issues were resolved promptly. The Community Meetings also were held with local businesses and the community at large. “This project included a significant amount of community involvement, particularly with respect to how traffic would be maintained during construction,” Baker said. “Many of the phased detours sent traffic from two different traffic routes onto local streets.” One lane of traffic in one direction has been maintained during work on Water Street, Front Street, and King Street from the Packers Island Bridge to Priestley

Avenue. Trucks longer than 36 ft., excluding local deliveries, are being detoured around and outside of Northumberland Borough, while cars during Duke Street construction are being detoured to roads within the borough. One of the biggest challenges includes maintaining access to businesses during construction. Temporary signs were installed to direct patrons to local businesses. “The community was concerned with traffic detoured onto local streets,” Baker said. “Businesses did not want traffic detoured away from their business.” Through numerous meetings with local officials and community advisory participants during the design phase, a 15-phase plan with additional sub-phases was agreed upon to minimize the impacts to the community and businesses. The department even committed to a week-long shut-down of construction activities during an annual community event. “Although not all members of the community were pleased with the project initially,” Baker said, she believes that “they will appreciate the final results.” They don’t have much longer to wait to see those results, as the project is on schedule for a June 2020 completion.  CEG

0 48 % FOR

SK KIDS &

M MONTHS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 47

KS

Finance offer expires 06.30.20 0.20

PLLUS! AN INC CLUDED

CONTTACT ACT Y YOUR OUR LOCAL AL GEHL DEALER TO GET ET STTAR ARTED TODA AY! Y!

Laurel, DE 302/715-5382

Frackville, PA 17931 570/874-6140

Baltimore, MD 410/247-2100

Harrisburg, PA 717/652-3190

South Plainfield, NJ 908/561-9000

Hatfield, PA 215/822-0145

Winslow Township, NJ 856/767-5900

Wilkes Barre, PA 570/824-9891

www.NorrisSales.com 1010 Conshohocken Rd. Conshohocken, PA 19428 610/279-5777 1-800/457-RENT (7368) 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856/740-1400 866/80-TOOLS (86657)

sales@admarsupply.com www.admarsupply.com

www.allislandequipment.com 39 Jersey Street West Babylon, NY 11704 631/643-2605

878 Old Albany Shaker 2390 Rochester Road Road Canandaigua, NY 14424 Latham, NY 12110 585/396-0031 518/690-0750 3001 West 17th Street 449 Commerce Road Erie, PA 16505 Vestal, NY 13850 814/833-7761 607/798-0333 1950 Brighton Henrietta 1394 Military Road Town Line Road Tonawanda, NY 14217 Rochester, NY 14623 716/873-8000 585/272-9390

SOLID D DESIGN www.gehl.com

7800 Brewerton Road Cicero, NY 13039 315/433-5000 121 Armstrong Road Pittston, PA 18640 570/299-5505

Page 48 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Above. Ahead. Always.

Visit demagmobilecranes.com to find your local distributor. 7021 Performance Drive N. Syracuse, NY 13212 800-342-7575

12 Mear Road Holbrook, MA 02343 508-868-7734

9 Finderne Avenue, Ste 7 Bridgewater, NJ 08807 908-203-0400

www.empirecrane.com

Authorized Cranes Distributor © Tadano Demag GmbH 2019. Demag is a trademark of Demag IP Holdings GmbH.

1

0

12:49

Expert: Adopt New Tech to Drive Construction Forward TECHNOLOGY from page 34

“They were supposedly delivered on a certain date, but the client never got them,” said Wolfe. “The day after, we’d flown the site. They used our map to share with the people who were supposed to deliver that the curbs were not there. They were able to document that with drones.” Tracking materials is another big benefit of drone technology, he said. The devices can be used to measure stockpiles. “Drones can do what it takes a surveyor days spent measuring crushed rock, for example. We can do the same with a drone with plus or minus 5 percent accuracy in hours rather than days.” Drones can also be used in site inspections. The technology is getting so sophisticated the user can build a 3D model of the project site. The drone can go around a building, take thousands of pictures, and stitch them together, zooming everything into one picture. “We’re virtually taking the com-

A

puter and moving it where you want in a building, clicking on a window ledge and the software zooms in further to see if there are cracks or breaks on the molding,” said Wolfe. “We’re building 3D models of the building in order to zoom in and inspect. The software allows the user to drop in comments or ideas to share with team.” Machines With Smarts Automated machine control is smart technology that helps prevent problems on the off-highway construction site. One example is Komatsu’s intelligent Machine Control (iMC) version 2.0, introduced at ConExpo in March. “No longer does an operator need to look to a grade checker/laborer or ground stakes for guidance on where to move the earth,” Komatsu’s website explains. “Now, 3D design data is fully integrated into the machine and the operator is guided to work at high efficiency.” These machines control the blade and bucket with sophisticat-

ed automation, aligning material movement to design decisions. The iMC 2.0 suite is designed to increase dozer productivity. Features include proactive dozing control that automatically cuts and strips from existing terrain like an experienced operator. It automatically spreads fill from existing terrain; tilts the blade to maintain straight travel during rough dozing; and creates a temporary design surface with one press of the button. The technology, said Chris Potter, technology solutions expert of Komatsu dealer Road Machinery and Supplies, Savage, Minn., is helping contractors get to grade faster with less-experienced operators. Road Machinery & Supplies Co. offers customers Komatsu iMC equipment with integrated GPS technology, propeller drone and software mapping services, GPS training, and iMC demo events. “Help is one of the biggest challenges contractors face currently,”

said Potter, referring to labor shortages in the construction industry. “The technology is helping contractors eliminate guys on the ground, and since the machines are more productive it can [eliminate the need for] extra equipment on site.” An operator can excavate a footing without a second person on the ground. The contractor can eliminate a dozer out of a sub cut because the excavator is getting that cut on grade. “Traditionally, this would be an excavator and dozer project, but now the dozer can focus on other parts of the job or not be there at all,” he noted. “Proactive dozing control is increasing the productivity of seasoned operators” who now can use the automatics from rough cut to finish grade, he explained, adding that the technology has been used on just about every task in the field. “Street reconstruction, new developments, underground utilities, parking lots, building footings, athletic fields, farm drainage proj-

ects — the list goes on and on. We have sold machines to customers that have two employees.” Potter believes the technology is essential for off-highway contractors. Upgrading the Job Site “You are really behind your competition if you are not utilizing the technology,” said Potter. “Having been with a contractor for 11 years and having field experience I cannot think of a task where it could not be utilized.” In fact, many people would say the same of smart technology in general on construction sites. As San Francisco, Calif.-based field data platform developer Rhumbix points out in a blog post, technology in construction is revolutionizing almost every aspect of the business. “If you haven’t yet, it’s time to adopt some of the new technologies driving construction forward. They’ll help you keep pace as your company benefits from industry growth.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 49

Abele Tractor & Equipment Co., Inc. www.abeletractor.com Albany, NY 12205 518/438-4444 Cherry Valley Tractor www.cherryvalleytractor.com Marlton, NJ 08053 856/983-0111 Erb & Henry Equip., Inc. www.erbhenry.com New Berlinville, PA 19545 610/367-2169

ADMAR Construction Equipment & Supplies www.admarsupply.com Vestal, NY 13850 607/798-0333 Tonawanda, NY 14217 716/873-8000 Canandaigua, NY 14424 585/396-0031 Rochester, NY 14623 585/272-9390 Cicero, NY 13039 315/433-5000

Eagle Power & Equipment Company www.eaglepowerandequipment.com West Chester, PA 19380 610/458-7054 Doylestown, PA 18901 215/348-9041 Farm-Rite Inc. www.farm-rite.com Shiloh, NJ 08353 800/752-6373 • 856/451-1368 Calverton, NY 11933 631/284-3127 F&W Equipment www.fwequip.com Orange, CT 06477 203/795-0591 Reading Tractor and Equipment www.readingtractor.com 5538 Pottsville Pike Leesport, PA 19533 610/926-2441

Marshall Machinery, Inc. www.marshall-machinery.com Honesdale, PA 18431 570/729-7117 Swiftwater, PA 18370 570/895-4884 Middletown, NY 10940 845/343-6683 Westchester Tractor Inc. www.wtractor.com Brewster, NY 10509 845/278-7766

Chappell Tractor www.chappelltractor.com 454 Route 13 South Milford, NH 03055 603/673-2640 ABLE Equipment Rental www.ableequipment.com Deer Park, NY 11729 866/468-2666 631/841-3333 Highway Equipment Company www.highway-equipment.com Millstone Township, NJ 08535 732/446-7600

Page 50 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Panther Tracked Vehicles Excel in Extreme Conditions ANTARCTICA from page 38

A Panther vehicle sits in the vast fields of Antarctica.

“Most of our fleet is on rubber, with the T16 available with rubber or steel,” he said. Current technology doesn’t lend itself to producing rubber tracks for the heaviest units. Because a truck chassis is common to each model, Steben noted that the machines are as versatile as trucks in their configuration — as firefighting equipment, as service trucks for offroad machinery, as pipelaying auxiliary equipment and so on. “Every application you can do on a truck, you can do the same on our machine. We can easily adapt to about any application.” A major difference, of course, is that Panther tracked vehicles can work where trucks cannot. ******************* So, this heritage of off-road proficiency was drawn upon to fashion a machine for Antarctica. The vehicle would be asked to safely and efficiently traverse unbroken expanses of ice and snow with optimal fuel consumption, at low-cost-perton haulage, and with minimal manning of equipment, all the while hooked to a tracked trailer with an onboard crane. Steben said the first engineering impulse was to add a trailer to the Panther T12, but that idea soon faded. Unlike previous custom machinery developed by the company, this novel project took the engineers further afield. “It was almost starting from zero,” he said. The Panther T16 became the starting point. It can carry almost 17 tons and is popularly configured with a dump box or flatbed and often is outfitted with digger derricks and cranes. The T16’s strong chassis was coopted for the Antarctic machine. Because an engine larger than the T16’s 300-hp. unit was needed, Cat came up with a 580-hp. diesel. The operator cabin on a Prinoth Bison snow grooming machine was adapted to the vehicle. However, the drivetrain is where the engineering team really earned its chops. The project specs called for a tracked vehicle and trailer functioning as a single unit, with a removable unloading crane affixed to the trailer. Rather than have the lead vehicle simply drag the trailer — a starkly inefficient arrangement — full tractive power was desired for each of the joined units. Consequently, power needed to be transmitted somehow from the Cat engine to axles on both the lead vehicle and the trailing one. The solution was to engineer a hydrostatic

transmission for each unit and electronically yoke them to function as one. Among other things, this required synchronizing the speed and torque of each transmission during turns, when relative turn speeds get complicated. “You can imagine some of the challenges we faced,” Steben said. The challenges were met and the unique machine was tested extensively on the proving grounds at Granby, one of several test areas the company utilizes worldwide to prove and improve its machinery. Finally, after two years of development, the new machine was shipped south to rumble around that far end of the earth. Steben traveled there from Canada last November to observe the vehicle in operation. His purpose was to optimize the vehicle’s performance under stark conditions not fully replicable on the proving grounds. “I was surprised by so many things down there,” he said. “Everything is so windy and dry. The wind is terrible — sometimes reaching 200 mph — so you can imagine how paint is affected, for example. It’s constantly being blasted by sand or ice. But there is no humidity, so there is no rust.” Prinoth is well-versed on how to maintain machines in snow and cold, but the extreme environment of Antarctica raises to another level the need for machine reliability. Being stranded by mechanical failure somewhere on the continent can be a death sentence. “Ease of repairing and making everything accessible always is important,” he said. “In Antarctica, this very basic stuff is extra important. Your life can depend on the small things. In those conditions, it’s not just hav-

ing a piece of equipment to do a job. It’s that while you’re doing the job, you need to survive also.” The borrowed components of Prinoth vehicles performed well, as expected. Steben pointed out that the Panther T16 “had been tested many, many hours and many winters in the field. We knew that wouldn’t be a big issue. The subzero temperatures of Antarctica were not new for the equipment, but the winds were.” The experience way down south gave Prinoth engineers some new things to think about, such as the effect on the cab environment of glaring snow and 24-hour sunlight. “Even when it is pretty cold there, with all the tinted glass of the cabin, it can be pretty warm inside. You almost need air conditioning.” They also witnessed the literal impact of traveling across pure ice — “a very, very hard” surface. How the suspension system absorbed this punishment, or didn’t, was carefully noted. So, increasing cabin comfort and improving suspension systems were some of the lessons the engineers took away from Antarctica and hope to incorporate in other Prinoth vehicles moving forward. ******************* While the vehicle as configured has not yet attracted orders from other customers, some interest has been shown by officials at other Antarctic stations. But the project itself has spawned confidence inside Prinoth — which is part of HTI Group — that it can successfully develop out-of-the-ordinary

equipment. “It once again shows we can do very special vehicles,” Steben said. “We can do oneof-a-kind, fully custom special solutions. More people outside the company now realize our capacity and ability to do stuff that nobody has done before. That is going to help us.” The company’s utility vehicle division continues to experience growth. Big rental houses have Prinoth machinery on their lots. Heavy equipment dealers are carrying the Panther line as an extension of their product offerings. Dealerships are cropping up around the world. Prinoth has engineering staff and manufacturing facilities in both Granby and Italy. Granby specializes in the crawler carriers and Bison snow groomers. Currently, the Panther T14R is the machine most in demand. The mid-size (15ton) crawler features a rotating chassis fitted with a dump bed and is deemed to be the fastest (8 mph) tracked vehicle in its class with the biggest payload. “It is very quick-maneuvering, and is very popular for disaster-recovery work or when working close to a seashore or riverbed,” Steben said. As for the future, there may or may not be more Prinoth end-of-the-world machines, but autonomous snow groomer concept vehicles are well along in their development. The overall concept includes such goodies as 3D drone scanning, obstacle recognition and failure prediction technologies. The knowledge gleaned from this development eventually will applied to the company’s other tracked vehicles.  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 51

MILTON CAT www.miltoncat.com Milford, MA 508-634-3400 Wareham, MA 508-291-1200 Cranston, RI 401-946-6350 Richmond, VT 802-434-4228 Scarborough, ME 207-883-9586 Brewer, ME 207-989-1890 Londonderry, NH 603-665-4500 Clifton Park, NY 518-877-8000 Syracuse, NY 315-476-9981 Batavia, NY 585-815-6200 Binghamton, NY 607-772-6500 North Reading, MA 978-276-2400

CLEVELAND BROTHERS www.clevelandbrothers.com Murrysvile, PA 888-232-2016 Harrisburg, PA 717-564-2121 Clearfield, PA 814-765-1611 Ephrata/Lancaster, PA 717-859-4905 Erie, PA 814-898-3388 Frackville, PA 570-874-3560 Indiana, PA 724-463-8743 Kane, PA 814-778-5250 Mansfield, PA 570-662-7171 Mount Pleasant, PA 724-696-4080 Pittston, PA 570-883-1044 Somerset, PA 814-445-7915 State College, PA 814-237-8338 Turbotville, PA 570-538-2551 Wilkes-Barre, PA 570-822-8141

Now Available with Tier 4 Final

Page 52 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 53

Contact your local dealer:

Highway Equipment & Supply Co. www.hwyequip.com Harrisburg, PA 717.564.3031 Drums, PA 570.788.1127 Ephrata, PA 717.859.3132 Lock Haven, PA 570.769.1070

Hoffman Equipment www.hoffmanequip.com Corporate Headquarters Piscataway, NJ 732.752.3600 Middlesex, NJ 732.377.4130 Deptford, NJ 856.227.6400 Lionville, PA 610.363.9200 Bronx, NY 718.822.1180 Medford, NY 631.207.2900

Perfect harmony between operator and excavator

Rudd www.ruddequipment.com Pittsburgh, PA 412.741.1731 Clearfield, PA 814.765.8500 Louisville, KY 502.456.4050 Charleston, WV 304.755.7788

Tyler Equipment www.tylerequipment.com East Longmeadow, MA 413.525.6351 Berlin, CT 860.356.0840

Vantage Equipment www.vantageeq.com Latham, NY 518.220.9500 Batavia, NY 585.344.1931 Syracuse, NY 315.437.2611

Woodco Machinery www.woodcomachinery.com Headquarters Woburn, MA 781.935.1919 Avon, MA 508.584.8484 Johnston, RI 401.942.9191

Dig more, make more when you have a Volvo excavator. These machines balance power and performance with fuel efficiency and comfort, making work more cost effective and saving time and money. See how a Volvo excavator can deliver more reliability – on the job and to your bottom line.

Page 54 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pages 55-77

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

U.S. Marine Vets Find New Path With Corps Materials Hartford, Conn.’s, Mike Randazzo and Louis Sanzaro both grew up in the construction industry: Randazzo in the new home construction and excavating sector and Sanzaro in landscaping. Following stints in the U.S. Marine Corp — Randazzo served from 2010 to 2014 with a deployment to Afghanistan while Sanzaro served from 1999 to 2003 during the invasion on Iraq — the two decided to start a business. Corps Materials, which was founded in March 2016, started the way many companies do … with an old excavator. A wheel loader soon was added, and the friends got busy doing local site work and some material handling. Then came a truck, and their list of services grew again, as did a reputation for hard work and honesty. As the volume of materials that they handled grew, their need developed for a yard where they could stockpile both virgin and demolition materials, such as torn up asphalt and concrete that had to be pulled away from jobs as they went along. In 2018, the pair landed some larger projects such as the construction of the Beam Brook Animal Hospital in Weathersfield, Conn., and some high-end residential see CORPS page 74

Mike Randazzo and Louis Sanzaro with their Volvo excavator, one of the centerpieces of their equipment fleet. Corps Materials’ Rockster R900 is turning garbage into profits.

Page 56 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

ASV Partners With Loftness to Optimize Battle Ax Mulching Head for ASV Machines

LARGE EQUIPMENT DEALER (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Stephenson Equipment, Inc. ASV Holdings Inc., a manufacturer of all-purpose and all-season compact track loaders and skid steers, partnered with Loftness Specialized Equipment to design a specialized Loftness S-Series Battle Ax mulching head for optimized performance with ASV machines. The skid steer and compact track loader attachment available through ASV’s dealer network is designed to produce a finer mulch with fewer passes, according to the skid steer and compact track loader attachment available through ASV’s manufacturer. It pairs with ASV’s The dealer network is designed to produce a finer mulch with fewer passes. RT-75 Heavy-Duty and RT-120 Forestry Posi-Track loaders, each optimized for high performance in forestry and other demanding applications. The attachment is ideal for improving productivity in forestry mulching, land clearing, trail development and rightof-way work. “It is important to us that our partners’ values align with ours, and we really see that in Loftness,” said Buck Storlie, ASV Holdings Inc. product line manager. “It’s why we worked so closely with them to make this specialized mulching head. The Battle Ax provides ASV customers the level of performance they need to get the most out of their machines.” The two companies worked together to match the attachment with ASV machines. ASV and Loftness extensively tested The Battle Ax with the RT-75 HD and RT-120F to optimize specifications and features including hydraulic set- ASV Holdings Inc. partnered with Loftness Specialized Equipment to design a specialized Loftness S-Series tings, gearing, back pressure and more. The Battle Ax gives contractors the ability to fell large Battle Ax mulching head for optimized performance standing trees, shave off large material, and complete for- with ASV machines. ward and reverse mulching. The attachment applies everything Loftness learned with the company’s flagship Carbide hydraulic system capacities and cooling systems. These sysCutter G4 and takes it a step further. The signature shear bars tems allow for operation even in high ambient temperatures and two-stage cutting chamber produce a finer mulch with with less risk of bogging down or overheating, according to the manufacturer. fewer passes. In addition, ASV Posi-Track loaders’ advanced suspenThe Battle Ax also includes the new Battle Ax rotor with built-in depth gauges. The depth gauges are carefully engi- sion and flexible tracks provide more operator comfort and neered to be less limiting than similar designs, improving maintain a better control of cutting height and speed as a productivity while optimizing the material feed rate to pre- result of the tracks flexing over obstacles instead of rocking over them. The undercarriage design also virtually guaranvent the attachment from engaging too much material. Like ASV machines, the Battle Ax is built with reliability tees the tracks will stay on, even in demanding brush clearing in mind. The attachment includes premium strength steel applications. ASV backs that up with a no-derailment guarhousing for enhanced durability and a number of features antee. The RT-75 HD and RT-120F include enhanced operator that minimize moving parts and simplify maintenance. An adjustable push bar and skid shoes give operators maximum protection, including a heavy-duty polycarbonate door, cross bracing and reinforced windows on a falling object proteccontrol. “We’ve worked with ASV for a number of years and tive structure (FOPS) and rollover protection (ROPS) cab. we’re excited that their customers have direct access to our The models also include metal guarding against brush and Battle Ax,” said Bill Schafer, Loftness product manager. debris around key areas, such as lights, the AC condenser “Extensive testing resulted in a unique attachment that pairs and rear screen. The machines blow debris from mulching perfectly with ASV equipment’s unmatched hydraulic applications out of the engine compartment screens with a hydraulically driven, auto-reversing cooling fan. A full rear power, reliability and performance.” When combined with ASV’s RT-75 HD or RT-120F, the brush guard is also available as a factory-installed option. For more information, visit www.asvi.com and S-Series Battle Ax performs at maximum capacity due to the perfect pairing between the attachment and the loaders’ www.loftness.com. 

www.stephensonequipment.com Butler, PA 724-865-9221 Ebensburg, PA 814-886-5191 Harrisburg, PA (HQ) 800-325-6455 Philadelphia, PA 800-220-4033 Wilkes-Barre, PA 866-667-6756

HAND-FED EQUIPMENT/ SKID STEER ATTACHMENT DEALERS (Brush Chippers, Stump Grinders)

Stephenson Equipment, Inc. www.stephensonequipment.com Butler, PA 724-865-9221 Ebensburg, PA 814-886-5191 Harrisburg, PA (HQ) 800-325-6455 Wilkes-Barre, PA 866-667-6756

Robert H. Finke & Sons, Inc. www.finkeequipment.com 1569 US Route 9W Selkirk, NY 12158 518-767-9331

of Saratoga

Bobcat of Saratoga www.bobcatofsaratoga.com 1279 Route 9 Gansevoort, NY 12831 518-798-9283

Westchester Tractor, Inc. Westchester Tractor, Inc. www.wtractor.com

60 International Blvd Brewster, NY 10509 845-278-7766

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 57

6750 Millbrook Rd. • Remus, MI 49340 • 1-800-952-0178 FIND US ONLINE WWW.BANDITCHIPPERS.COM .

Bandit Buuilds More Thaan Machines. Machines .. Bandit Industries has based b its reputaation on a simplee truth – build them strong and stand behind our customers. And thaat’s what we’ve done ever very stepp of the wayy. Every Bandit ndit® machine uses the highhest quality steel and is construucted by specialized teams to sttand up to the toughest jobs. Tha T at’s why more professionals trust a Bandit for their toughest jobs. And every machine is backked by unbeatable factory suppport and an extensive dealer network. twork. When it comes to yourr business, Bandit Industries dooesn’t just build machines. See how Bandit can build your bottom line. Contact your local authorized Bandit dealer today or visit www.banditchippers.ccom to learn more!

LARGE EQUIPMENT DEALER (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Leslie Equipment Company www.lec1.com 6248 Webster Rd. Cowen, WV 26206 304-226-3299 Fax: 304-226-3067 Beaver, WV 304-255-1525

Cross Lanes, WV 304-204-1818

Ashland, KY 606-327-1709

Fairmont, WV 304-534-5454

Pikeville, KY 606-432-0321

Norton, WV 304-636-6421

Marietta, OH 740-373-5255

Page 58 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

MILTON CAT www.miltoncat.com

THE GEAR G TO CLEAR

Contractor and recycling customers in ME, RI, VT, NH, MA, and state of NY, excluding New York City and surrounding counties.

100 Quarry Drive Milford, MA 01757 508-634-3400

16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586

14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200

79 Robertson Blvd. Brewer, ME 04412 207-989-1890

84 Concord Street North Reading, MA 01864 978-276-2400

500 Commerce Drive Clifton Park, NY 12065 518-877-8000

2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350

294 Ainsley Drive Syracuse, NY 13210 315-476-9981

Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 30 Industrial Drive Londonderry, NH 03053 603-665-4500

55 Industrial Park Drive Binghamton, NY 13904 607-772-6500 4610 E. Saile Drive Batavia, NY 14020 585-815-6200

WHITNEY & SON, INC. www.whitneyandson.com Aggregates and quarry customers in CT, MA, ME, NH, RI, and VT.

MANY MODE ELS, ENDLESS APPLICATIONS ATIONS High volume land cle earing operations know that when it co omes to creating the highest volume products p at th lowest the l t costt per tto on, P Peterson t horizontal grinders and chippers off ffer er bett better fracturing g, more accurate product sizing, and more m throughput than any machine on n the market.

95 Kelley Ave. Fitchburg, MA 01420 800-245-5472 978-343-6353 info@whitneyandson.com

Since 1981, Peterson’s P attention to detail and drive to build the highest quality, y, highest highe est vvolume producing machines hi maake k a Peterson P t a sure investment. Want to t see what w a Peterson can do?

Give us a call at 800.269.6520 8 or visit us at ww ww.petersoncorp.com

New England New England Pennsylvania Pennsylvania Groff Tractor GT Mid AtlanticMaryland, Delaware, & New York & West Virginia & West Virginia New Jersey & New York New JerseyNE Virginia, West Virginia www.barryequipmen nt.com www.clevelandbrothers.co om www.gr tractor.com www.albancat.com www.barryequipmen nt.com www.clevelandbrothers.co om offfftr www.gtmidatlantic.com

Blower Trucks

•

Chippers

•

G Grinders

•

Screens Screens

•

Stacking tacking tack ki Conveyors C

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 59

CB

Con-Agg

CB CON-AGG

Lokotr o ack® ST4.10™ mobile screen

A Division of Cleveland Brothers

www.cbconagg.com 2009 State Rd. Camp Hill, PA PA 17011

888-725-4903 717-561-3339

Hig gh production needs heaavy-duty screening

Aggregatess,, quarrryy, contractorr,, and reccyycling customers in the state of PA. PA. Locations: 5300 Paxton Street Harrisburg, PA

4565 William Penn Hwy. Murrysville, P PA A

Old To Town Rd & Rte. 879 Clearfield, PA PA

168 Industrial Park Road Somerset, PA

11 Progress Drive Cranberry Twp., PA

2955 Stewart Drive State College, P PA A

3950 Depot p Road Erie, PA

Rt. 54 & I 180 ((Exit 5)) Turboville, P PA A

1500 S. Altamont Blvd. Frackville, PA PA

Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA

145 Rose St. Indiana, PA

4326 Oregon Pike Lancaster, PA

3105 Route 219 Lantz Corners, PA

309 Foothills Lane Mount Pleasant, PA PA

US Rt. 6 East Mansfield, PA

441 Route 315 Hwy. Pittston, PA

Lokotrack a ST4.10 5' x 20' mobile screen is ideal fo or large-scale aggreg gates production. Its triple deck screen produces fo our end produccts.

High capacit y screening Large-scale 5' x 20' triple deck screen

The adjjustable discharge height on 33' side conveyors makes it a powerful f screen in closed circuit crushing processes together with th other th Lokotr k t ackk units it , and d th the wide id ffeed e d hopper is ideal fo or whee h ell loader fe eeding in sand and gravel screening. Contacct your distributor or visit www.metso.com for more.

Closed circuit Ideal for closed circuit processes

FOLEY, INC. www.foleyinc.com y Contrrac actor and reccyycling customers cust in NJ, eastern PA, PA, and northern DEE.. 855 Centennial Ave. Piscataway, NJ 08854 732-885-5555

2975 Galloway Rd. Bensalem, PA 19020 215-639-4300

650 S. Egg Harbor Rd. Hammonton, NJ 08037 609-561-0308

5102 Beekmantown Rd. Whitehall, PA PA 18052 610-261-4887

720 Pulaski Hwy. Bear, DE 19701 302-328-4131

Hybrid power Bi Power for elec tric op perations

H.O. PENN MACHINERY CO., INC. www.hopenn.com p Contractor and reccyycling customers in lower thirteen counties of NY Y,, and in the state of CTT. 122 Noxon Rd. Poughkeepsie, NY 12603 845 452 1200 845-452-1200

783 Bloomingburg Rd. Bloomingburg, NY 12721 845 733 6400 845-733-6400

699 Brush Ave. Bronx, NY 10465 718-863-3800

660 Union Ave. Holtsville, NY 11742 631-758-7500

225 Richard St. Newington, CT 06111 860-666-8401 Contact our Aggregate Specialists: In CT call Scott Gilligan 860-461-6534 In NY call Kevin Kretschmer 646-315-2284

Track-mounted unit On-site mobilit y and easy to transpor t bet ween sites as a single unit

Page 60 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Authorized Dealer

2016 Tesab 1012TS Impact Crusher, Stk# CE261C, 4,486 Hrs, Heavy duty crusher with extra crushing and shaping path; CAT C13 Engine, 3 to choose from; new and used

2017 McCloskey I54 V3 Impact Crusher, Stk# MCC245C, 1,222 Hrs, Volvo Engine; 8' double deck re-screen, 48"x53" four bar impactor rotor, wider main and side conveyors, ideal for some of the toughest applications 4 to choose from; new and used

5064 FE ATURES )HDWXUHV DQ HQFORVHG HQJLQH FRPSDU WPHQW /DUJH IHHG RSHQLQJ DQG LQFK KDPPHUPLOO ZLWK D VHOI FOHDQLQJ DLU LQWDNH V\VWHP 2VFLOODWLQJ VWDFNLQJ FRQYH\RU $YDLODEOH RQ &$7 7UDFN 6\VWHP RU DV D $OVR PDQXIDFWXUHV D ZLGH YDULHW \ RI TXDOLW \ ¿I WK ZKHHO WUDLOHU W X E J U L Q G H U V 7KUHH GLI IHUHQW OHYHO RSWLRQV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS N Z WR KS N Z

action

cts in View produ Tech D e on th ura l! channe

2004 Powerscreen / Pegson 1180 Premiertrak (1100x800; 16x5) Jaw Crusher, Stk# CE295C, 7,659 Hrs, High-performance jaw crusher. Ready to work!

2012 Terex Finlay 1175 Jaw Crusher, Stk# CE349C, 3,762 Hrs, Ideal for quarrying, mining, demo and recycling applications

2012 Sandvik QJ341 Jaw Crusher, Stk# CE370C, 5,005 Hrs, Ideal for many applications; equipped with a C12 jaw crusher and powerful CAT C9.3 Engine

2014 Sandvik QA340 Doublescreen / Live Head, Stk# CE352C, 4,175 Hrs, Facilitates greater accuracy and productivity for a more efficient screening system

TC-12 FE ATURES 7KLV SRZHU IXO FKLSSHU FDQ JULQG ORJV XS WR LQFKHV LQ GLDPHWHU DQG LV FRPSDFW VR LW FDQ EH HDVLO\ WRZHG WR D MRE VLWH KS N Z &$7 & GLHVHO HQJLQH 37 7HFK FOXWFK )HDWXUHV D VSULQJ ORDGHG IHHG ZKHHO ZLWK DGMXVWDEOH GRZQ SUHVVXUH

2SWLRQDO KHLJKW VHQVRU WKDW DXWRPDWLFDOO\ DGMXVWV WKH IHHG UROOHU WR PDWHULDO VL]H 2SWLRQDO K\GUDXOLF JDWKHULQJ ZLQFK ,QQRYDWLYH KRSSHU VDIHW \ OLJKW EDUV ZLWK HDV\ DQG LQVWDQW VKXW GRZQ $YDLODEOH ZLWK SLQWOH RU EDOO KLWFK

Wm. Biers, Inc. 1998 McCloskey 621RE Trommel Screen, Stk# MCC126C, 4,330 Hrs, CAT Engine; proven reliability in a variety of applications, including recycling, 6 sizes to choose from; new and used

100 Port St. • Port of Albany, NY 12202 518-434-2747 • Fax: 518-434-2754 www.wmbiers.com 2015 KPI-JCI 30x50 Radial Stacker, Stk# CE342C, Hydraulic, w/belt scale

All Equipment Subject to Availability

(877) 217-4474 See our full line of new and used equipment at

www.commonwealthequipment.com

w w w.duratechindustries.net

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 61

Page 62 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Cat MH3040 Material Handler Cuts Fuel by Up to 25 Percent Delivering the power and reliability required for the most demanding material handling applications in scrap and millyard operations, the new Cat MH3040 builds on the successful legacy of the M325D L MH model. The boom, sticks and other high-stress areas feature thick, multiplate fabrications, castings and forgings to withstand wear and deliver years of durable operation. Specially designed mountings on the upper frame support the new heavy-duty cab. The material handler’s new 202-hp (151kW) Cat C7.1 engine meets stringent U.S. EPA Tier IV Final emission standards with an aftertreatment system that requires no maintenance or downtime. New Smart Mode operation automatically matches engine and hydraulic power to working conditions to reduce fuel consumption, while Power Mode constantly provides maximum power to optimize productivity. The fuel-efficient engine can run up to B20 biodiesel and offers up to 25 percent lower fuel consumption than the M325D L MH, according to the manufacturer. Offering a 12 percent faster swing speed, the MH3040 reduces cycle times and allows operators to move more material in the same amount of time. The advanced hydraulic system features valve priority to direct pressure and flow to where it’s needed and delivers the optimum balance of power, efficiency and load control. The handler’s new heavy lift mode boosts lifting capacities and improves controllability. Its auto warm-up features reduce the time it takes for hydraulic oil warming in cold temperatures to prolong component life.

The MH3040’s larger premium cab design includes sound suppression to reduce operating noise levels inside the cab. Smaller cab pillars combined with large tempered windows deliver enhanced allaround visibility.

fatigue, while joystick settings and preferred power mode are quickly set to a specific user ID via the monitor. The premium air suspension seat with headrest, heater and ventilator is designed to comfortably adjust to operators of all sizes. Offering a maximum 50.8-ft. (15.5-m) reach, multiple configurations are available for the flexible MH3040 material handler to meet customer needs. Customers can choose from a range of work tool attachments in different sizes to meet the site’s material han-

dling and production needs. Work in low-light conditions with the standard, 1,800 lumen, LED lights on the boom, stick, and cab. The optional 20 kW generator with wiring to stick nose helps to efficiently power magnet attachments for handling fine ferrous material. Simplified Serviceability MH3040 material handler service design changes reduce maintenance costs by up to 20 percent. All fuel filters feature a synchro-

nized 1,000-operating-hour change interval, and the new air intake filter with precleaner lasts up to 1,000 hours to reduce maintenance requirements. Its new hydraulic oil filter improves filtration and increases change intervals to 3,000 operating hours, a 50 percent longer service life over the M325D L MH. New anti-drain valves keep the hydraulic oil clean during filter replacement to improve system longevity. Filter life and maintenance intervals are quickly tracked through the in-cab high-resolution monitor. Featuring electric drive to operate only when necessary, the high-efficiency cooling fans can be programmed to automatically reverse at set intervals to keep the cores clean without work interruptions. The new right-hand-side service access provides easy access for refueling and engine oil checks. Standard Cat Product Link, new to the MH3040 material handler, captures critical operating data such as location, hours, fuel usage, productivity, idle time, maintenance alerts and fault codes, which can be remotely accessed and tracked to boost fleet management efficiency. New Remote Flash works around the production schedule to conveniently assure the machine is operating with the most current version of on-board software, so it delivers high performance, maximum efficiency and minimum downtime. For more information, visit www.cat.com. 

Comfort and Flexibility The MH3040’s larger premium cab design includes sound suppression to reduce operating noise levels inside the cab. Smaller cab pillars combined with large tempered windows deliver enhanced allaround visibility. Rearview and right-side cameras are standard, keeping operator aware of their surroundings. New joystick machine control removes the center steering wheel column to further improve forward visibility. A tip-up left console allows operators to enter and exit the cab much easier. A larger, 10-in. high-resolution touchscreen monitor with jog-dial offers easy navigation of the intuitive operator controls. Joystick Offering a maximum 50.8-ft. (15.5-m) reach, multiple configurations are available for the flexible MH3040 material handler to meet controls are ergonomically located customer needs. Customers can choose from a range of work tool attachments in different sizes to meet the site’s material handling within easy reach to reduce operator and production needs.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 63

R O C K S O L I D S E RV I C E · W E C R U S H Y O U R R O C K S 140 Nutmeg Road South South Windsor, CT 06074 51 Veterans Drive Loudon, NH 03307

LARGEST DEALER IN NEW ENGLAND Selling the most advanced Portable Crushing & Screening Plants All of our plants are designed for high productivity and easy movability Save labor, power, maintenance, plant relocation costs, time Gain productivity and profitability Ideal for applications involving hard, abrasive materials Call today for more information

1-800-53-CRUSH Over 100 Machines in Stock

W W W. P O W E R S C R E E N - N E . C O M Family Owned and Operated for over 20 years

Call for Parts Today

R O C K S O L I D S E RV I C E · W E C R U S H Y O U R R O C K S

Page 64 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING

MA ATERIAL TERIAL HANDLING HAN NDLING

SCREENING

TRACKS

www.baschma ann.com

www.thompsonrolec.com p

WASHING W ASHING & CLASSIFYING CL LASSIFYING

ZZZ KRႇPDQHTXLS FRP

www.murrysvillemachinery y y.com m

The complete source for equipment in th he aggregate, construction and recycling industries. tries. Offering industry-leading brands such as the Piioneer Jaw Crusher, Kodiak® Plus Cone Crusher, SuperS Stacker® ® ® ® Extendable Stacker, ProSizer Mobile Screening g Plant, Combo Screen, Vari-Vibe a High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 0 equipment, Fast Trrax, Global Track and FastPack.

www.kpijci.com pijci com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 65

GET A HAN NDLE ON OPERAT ATING G COSTS Penn Jersey Machinery

Terex® Fuchs Material Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® ere Fuchs material handlers help you get a handle on your business with: An average 11% reduced fuel consumption versus com mpetitive material handlers

Deptford, NJ Hoffman Equipment 856-227-6400 www.hoffmanequip.com

W.I. Clark Company www.wiclark.com 17 Eagle Road Danbury, CT 06810 203-775-1203 866-675-2120

300 South Randolphville Rd. Piscataway, NJ 08854 732-752-3600 Frenchtown,

NJ 908-824-4200 333 Cedar Ave.

Middlesex, NJ 08846 732-377-4160

Lionville, P PA A 1330 Hurffville Rd. 610-363-9200 Deptford, NJ 08096

80 Pratt Road Plainfield, CT 06374 860-546-4808

The Tere e x Fuchs Tel e ematics System for real time fleet and equipment metrics to manage it all Plus you can always relly on your local Terex Fuchs h distributor to keep your material handlers operating at peak efficiency, with Tere e x certified parts and trained service technicians.

Staten Island, 114 Zerega Ave. Bronx, NY448 10462 71 718 8-4 4 8-24 2444 44 718-822-1180 1440 Route 9W Marlboro, NY 12542 854-236-3000 22 Peconic Ave. Medford, NY 11763 631-207-2900

Chelmsford, MA C.N. Wood Co., Inc. 800-804-0775 www.cn-wood.com 200 Merrimac Street Woburn, MA 01801 Bangor, ME 781-935-1919 800-698-4838 140 Wales Ave. Avon, MA 02322

508-584-8484 Caribou, ME 102 State Road 800-270-2547 30 Barnes Industrial Park Road

856-227-6400

An average 45% lower cost of ownership at 1000 hrs versus v compettiti itive material handl dlers

Chadwick-Baross

NY

Wallingford, CT 06492 203-265-6781

Whately, MA 01093 413-665-7009

Westbrook, Westbrook, M ME 60 Shun Pike 800-262-5 800 262-5714 714 RI 02919 Johnston, 401-942-9191

25a Road Concord, NBernhard H New Haven, CT 06513 Highway Equipment Company 203-848-6735 603-224-40 63 www.highway-equipment.com 4690 Route 219 84B Warren Ave DuBois, PA 15801 Westbrook, ME 04092 814-371-3600 207-854-0615 877-888-4326

120 Gordon Dr. Lionville, PA 19341 610-363-9200

For more information on Terex Fuchs h material handlers, contact your local Terex Fuchs distributor or visit us at terex.com/con nstruction

Edward Ehrbar Inc..

5846 West Road McKean, PA 16426 814-476-7755 866-476-7755

Yonk o ers, NY 914-738-5100

Holbrook, NY All 6 Island 631-563-7 00 Equipment

www.allislandequipment.com 39 Jersey Street West City Babylon, NY 11704 Yo ork , NY 631-643-2605

New 718-626-3331

Danbury, CT 203-743-00 43 0088

© 2014 Te erex Construction. Terex, the Terex e Crown design, Te erex Fuchs and Wo orks For Yo ou are trademarks of Te erex Corporation or its subsidiaries.

Page 66 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Aluminum Producer Relies on ‘Computer Free’ Sennebogen 825M for Max Uptime On-site logistics for JSC Aluminium Alloys.

GROFF TRACTOR & EQUIPMENT, LLC 6779 Carlisle Pike • Mechanicsburg, PA 17050 800-33-GROFF • (717) 766-7671 Ephrata, PA (717) 738-0220 State College, PA (814) 353-8400 Cranberry Twp., PA (724) 898-1535 New Stanton, PA (724) 755-0124 Ebensburg, PA (814) 472-7300 www.grofftractor.com

JESCO Inc. New Jersey & New York 118 St. Nicholas Ave. • South Plainfield, NJ 08070 (908) 753-8080 1790 Route 38 • Lumberton, NJ 08048 (609) 267-2020

The 825 D-Series loads an outbound truck using an orange peel grapple.

There’s no time for downtime at JSC Aluminium Alloys, one of the largest aluminum alloy producers in Russia. Operating conditions at the mill are challenging and the three material handlers that take on most of the site’s loading and logistics tasks are on the run around the clock. That’s why Andrey Tsidenov, the general director of the plant, chose Sennebogen 825 M machines for the job. Tsidenov said his mill is no place for equipment that relies on sensitive electronics to keep producing efficiently. Sennebogen’s full line of material handlers is purpose-built for just such working environments. In these machines, smart hydraulics take the place of computers and black boxes to lift and carry loads smoothly, quickly and cost-effectively.

Keeping Equipment Up-to-Date Located in Podolsk, near Moscow, JSC Aluminium Alloys employs 320 people and produces approximately 49,600 tons per year of finished aluminum products. Up to a half of the company's production is exported to Asian countries and North America. The raw material is used in profiles for aluminum frameworks, special tools and even engines. Tsidenov attaches great importance to the continual updating of production technologies and equipment. In 2010, the company acquired a rotary kiln system, which opened opportunity and a new revenue stream including slag processing. Following this addition, the company began upgrading its material handling fleet with its three Sennebogen 825 M material handlers. The third of these went into operation in Spring of last year. Versatile, Powerful The 825 M is a rubber-tired 57,600 lb. (26,127 kg), 197 HP (145 kW) machine. Equipped with a Sennebogen K12 boom, it has a reach of almost 40 ft. (12 m) and the machines

1275 Bloomfield Ave. • Fairfield, NJ 07004 (973) 227-2221 • (800) 321-8080 497 Fishkill Ave. • Beacon, NY 12508 (845) 831-1800 • (800) 724-0725 110 East Jefryn Blvd. • Deer Park, NY 11729 (844) 482-0910 www.jesco.us

MONROE TRACTOR New York 1001 Lehigh Station Road • Henrietta, NY 14467 (585) 334-3867 • (866) 683-5338

are able to move between workstations on the 9-acre mill site at speeds up to 12.5 mph (20 kph). Tsidenov’s Sennebogen fleet supports all transport and logistics processes at the mill. The machines work three shifts every day unloading the raw materials and distributing them to sorting plants, loading scrap for remelt and loading finished products for shipment. Compact Maneuverability The mill’s head of transport, Andrei Frolushkin, agrees that Sennebogen’s “computer free” engineering is essential for the working conditions in the factory. The design of the site, originally built in the 1950s, also attracted the management to the compact size of the 825s. Road height is low and limited by masts and pipes. The 825s’ low travel height and maneuverability allow it to travel through the difficult paths with the boom and stick fully extended in transport position. After seven years of experience with Sennebogen, Frolushkin is sure that Sennebogen technology is the best choice for JSC Aluminium Alloys. “Their reliable maintenance, robust construction and simplicity definitely convinced us," he said. For more information, visit www.sennebogen-na.com. 

5035 Genesee Street • Buffalo, NY 14225 (716) 681-7100 • (800) 834-9606 7300 Eastman Road • N. Syracuse, NY 13212 (315) 452-0000 • (800) 287-5286 8194 State Route 415 • Campbell, NY 14821 (607) 739-8741 • (800) 866-8912 6 Equipment Drive • Bingamton, NY 13904 (607) 754-6570 • (866) 321-4277 www.monroetractor.com

NORTRAX 98 Sheep Davis Road • Pembroke, NH 03275 (603) 225-2769 300 Clinton Street • Springfield, VT 05156 (802) 885-6840 www.nortrax.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 67

A WIRTGEN GROUP COMPANY A

THE EVOLUTION OF INNOVA VATION. T THE EVO-LINE FROM KLE EEMANN

EVO IT’S ALL ABOUT EVOLUTION. The demands placed on plant s in the contrac ting sec tor are high: maximum output matched with cos tef fec tive operation – and all for the mos t diverse applications. This is exac tly what dis tinguishes KLEEMANN E VO -Line plant s. Thanks to highly innovative solutions, such as an advanced material flow concept, continuous feed sys tem, out s tanding safet y concept s and many more, KLEEMANN’sE VO -Line mobile jaw crushers, impac t crushers and cone crushers deliver a solid plus in per formance, ef ficienc y and versatilit y. Progress calls for real innovation – the KLEEMANN E VO -Line. w w w.wir tgen- group.com//a america

WIR RT TGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T Telephone: elephone: 615-501-0600

ROBERT H. FINKE AND SONS Western VT & Upstate NY 1569 US Route 9W Selkirk, NY 12158 (518) 767-9331 www.finkeequipment.com

CENTRAL EQUIPMENT COMPANY Maine 45 Dempsey Graves Stillwater, ME 04489 (888) 927-8762 (207) 827-6193 www.centralequipmentco.com

ELLIOTT & FRANTZ, INC.

W. I. CLARK COMPANY

SCHMIDT EQUIPMENT INC.

DE, MD, VA & Southeast PA 450 East Church Road King of Prussia, PA 19406 (800) 220-3025 (610) 279-5200 www.elliottfrantz.com

Connecticut 30 Barnes Industrial Park Road S. Wallingford, CT 06492 (866) 675-2120 (203) 265-6781 www.wiclark.com

New England 80 Southbridge Road Rt. 20 North Oxford, MA 01537 (508) 987-8786 www.schmidtequipment.com

Page 68 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

UPCOMING SPECIAL SECTIONS ISSUE

14

Wheel Loaders, Tools Carriers Ad Closing Date Publishing Date

ISSUE

16

Backhoes Ad Closing Date Publishing Date

ISSUE

18 20 22

August 24, 2020 September 2, 2020

Off-Road Trucks Ad Closing Date Publishing Date

ISSUE

July 27, 2020 August 5, 2020

Utility Equipment, Trenchers Ad Closing Date Publishing Date

ISSUE

June 29, 2020 July 8, 2020

September 21, 2020 September 30, 2020

Crawler Loaders, Dozers Ad Closing Date Publishing Date

October 19, 2020 October 28, 2020

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 69

Dediccated team. Ded dicated d equipm ment. With the enntire Wirtgen G W Grooup and expert support, you won’t need anothher dealer.

We understand yourr business and sensse of urgency. Contaact us today! TTom om Rizzoo, Wirtgen Product Sales Specialist, S West 585-303-2179 trizzo@monroetractor.com

TTom om Kiselica, Wirtgen Product Sales Specialist, East 315-420-5856 tkiselica@monroetractor.com

Equipment, rental, parts and nd serpment, vice i aavvailable il blee parts att 6 locations landtiser onssvice Ylocations ork k State St t throughout –hroughout monroetr tNew actor toor Equipment, rental, availableNew at 6York YYork State – moonroetractorr.com .com Equip v throughout ocations h oughout Yorork o.com

Now Your Kleemann Dealer for Eastern New York State!

1569 US Route 9W •  Selkirk, NY 12158 (518) 767-9331

www.finkeequipment.com

EVOLUTION OF INNOVATION Innovative details, safety of the operator, simple handling - with optimal performance values at the same time. This is what KLEEMANN crushing and screening plants represent. The technical know-how and detailed knowledge of the technology is transferred directly to production when working together as a team.

Page 70 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

ǡ Ƭ ǤǤǤ

Terex Washing Systems Offers Local, Remote Tech Support

ϴϬϬͲϱϮϵͲϮϱϭϱ ƵƚŚŽƌŝnjĞĚ ŝƐƚƌŝďƵƚŽƌƐ &Žƌ

Z KůƐŽŶ DĨŐ͕ ͞ Ƶŝůƚ ŝŶ ƚŚĞ h^ ͕͟ ďĞůŝĞǀĞƐ ŝŶ ďƵŝůĚŝŶŐ ƚŚĞ ƐƚƌŽŶŐĞƐƚ͕ ŽǀĞƌ ĞŶŐŝŶĞĞƌĞĚ͕ ďĞƐƚ ƌŽĐŬ ĐƌƵƐŚŝŶŐ͕ ƐĐƌĞĞŶŝŶŐ͕ ƌĞĐLJĐůŝŶŐ͕ ĐŽŶǀĞLJŝŶŐ ƉŝĞĐĞ ŽĨ ĞƋƵŝƉŵĞŶƚ ŵŽŶĞLJ ĐĂŶ ďƵLJ͘

ZŽĐŬƐƚĞƌ EŽƌƚŚ ŵĞƌŝĐĂ͛Ɛ ƉƌŽĚƵĐƚ ůŝŶĞ ŝŶĐůƵĚĞƐ ƚƌĂĐŬ ŵŽƵŶƚĞĚ ŝŵƉĂĐƚ ĂŶĚ ũĂǁ ĐƌƵƐŚĞƌƐ ĂƐ ǁĞůů ĂƐ ƚƌĂĐŬĞĚ ƐƚĂĐŬĞƌƐ ĂŶĚ ƐĐƌĞĞŶŝŶŐ ĞƋƵŝƉŵĞŶƚ

As international travel will continue to be disrupted for a considerable period of time, this local assistance, offered in conjunction with Terex’s “Remote Support Technical Team” of experts, means Terex can offer support to any washing operation, ensuring you can continue to operate, maximize your uptime and production, according to the manufacturer.

Never before has local support been as important, and Terex Washing Systems and its global dealer network has the ability to continue to provide vital “on the ground local support” during these unprecedented times. As international travel will continue to be disrupted for a considerable period of time, this local assistance, offered in conjunction with Terex’s “Remote Support Technical Team” of experts, means Terex can offer support to any washing operation, ensuring you can continue to operate, maximize your uptime and production, according to the manufacturer. Barry McMenamin, TWS director, said, “Our global dealer network provides enhanced levels of sales, service and support so we can continue to provide ongoing

world-class service and support to our customers during these challenging times. The support of our regional partners combined with TWS direct support and experience means we can offer our customers end-toend solutions, support and service. We’re working with partners who have been in the industry for many years and have extensive experience and expertise in servicing mining and quarrying industries.” Talk Directly To Our In-House Experts With more than 70 dealers globally, Terex has a dealer close to you that can offer support to all wet processing operators, the manufacturer said. For more information, visit www.terex.com/washing. 

^ > ^ d D ƐŬ ĂďŽƵƚ ŽƵƌ ŽŵƉĞƟƟǀĞ ZĞŶƚĂů ZĂƚĞƐ ĂŶ dƌŽŝĂŶŽ Ͳ ϮϬϯͲϱϬϲͲϯϴϲϬ ; d͕ D ͕ Z/Ϳ :ŽĞ ŽůůĂnjŽ Ͳ ϮϬϯͲϴϴϲͲϱϱϱϴ ;Ez͕ E,͕ D ͕ sdͿ

^ĞĞ ŽƵƌ ĐŽŵƉůĞƚĞ ŝŶǀĞŶƚŽƌLJ Ăƚ

ǁǁǁ͘ Yh/WͲ^ > ^͘ĐŽŵ

6$9( $ /,)( '21·7 '5,9( +20( %8==(' %8==(' '5,9,1* ,6 '581. '5,9,1*

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 71

෈FLDO GHDOHU IRU &%, 7 7H HUH[ (FRWHF North Carolina a • South Carolina Virginia • West Virginia

1-800-79 97-7276 • www.powerscreenmidatl.ccom • 80 Gregor y Rd NE, Leland, NC C 28451

CBI 6800CT 68 800CT CT

H HORIZONTAL GRINDER

• Produces more than 2 200 tons an hour ‡ &$ $7 7 & KS RU RSWLRQDO &$ $7 7 & KS HQJLQHV ‡ +RJ ER[ UDLVHV IRU IDVW DQG HDV\ VFUHHQ DQG WLS FKDQJHV ‡ µ GLDPHWHU E\ µ ZLGH IRUJHG KLJK VWUHQJWK URWRU FRUH ‡ /DUJH FDSDFLW\ IHHG KRSSHU HDVLO\ KDQGOHV IXOO OHQJWK WUHHV ‡ 0HWDO 'HWHFWLRQ 6\VWHP SURWHFWV PDFKLQH IURP WUDPS PHWDO

ECOTEEC PHOENIX 21000 TROMMEL SCREEN

• Unrivaled high volum me compost production • Mulch l h color l ing i packa kage across applications li i o • 180 UDGLDO ÀQHV FRQYH\RU FRQWUROOHG E\ UHPRWH

Page 72 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING EQUIPMENT, PARTS & SERVICE

2017 Irock RDS-15 Closed Circuit Impactor - NEW RDS-15 horizontal impact crushing plant. As the name suggests, the RDS — rapid deployment system provides exceptional portability and rapid setup time. Ideal for processing smaller materials such as reclaimed asphalt pavement (RAP) or Concrete demo. Powered by a Caterpillar 350hp engine, 5x14 double deck screen can process up to 350 tons per hour. The entire plant is self-contained, with on-board power supplying full plant operation. Please call if interested

30x60 Electric Stacking Conveyor - NEW Electric Radial Stacking Truss Conveyor. Super strong and over built. Their conveyors are made right here in Ct. by Ace/Milroy Company Using all quality components. Come check them out!

2001 JOHN DEERE 400C ARTICULATED DUMP TRUCK - Fully rebuilt 410hp Mercedes Benz Engine, Fresh paint and great rubber. Has Allison HD4560 Transmission, 6x6 Machine weighs 62722lbs Empty. This machine is ready to work. $78,000 2016 TEREX M390 - The Terex M 390 Wash plant is a high capacity mobile washing unit that has been engineered for quick installation and ease of relocation making it ideal for applications including sand, gravel, coal and crushed stone.

Telsmith T300 Cone Crusher - Used low hr Telsmith T300 Cone Crusher. This cone has been designed for maximum uptime and productivity while delivering 300HP performance and a crushing capacity output range from 125 to 400 Mt/hr in tough or abrasive mining applications. Comes with full Trac 10 automation. Call for more info today!

2017 JP550 Grizzly Scalping Stand - Keep the BIG nuggets from tearing your screener apart with our JP550 Scalping Stand. Custom built for your application. Back your machine in and start bailing material without worries. Call today for more information.

2015 Irock TC-20 Tracked Impactor - Used TC-20 track impact crusher combines a large feeder, high-performance four-bar impactor and heavy-duty components for exceptional efficiency, reliability and precision. The TC-20 produces a uniform, cubical product, and hydraulically adjustable aprons provide better control over sizing. The unit has the versatility to process soft to medium rock, recycled concrete and recycled asphalt. The rotor measures 40 inches by 56 inches and can process a variety of materials up to 24 inches in diameter. A 440-horsepower Caterpillar® C-13 ACERT Tier 3 engine powers the impact crusher, which can process up to 500 TPH. 800 hrs on machine, come watch it run today!

2014 Irock TS-512 Tracked Screener - Used less than 1200hrs Heavy-duty design. The unit features high portability, three hydraulic folding side conveyors allow easy transport and quick set-up. 100horsepower CAT® C4.4 to sort up to three different product sizes at rates up to 400 TPH. Three hydraulic, folding side conveyors allow easy transport and set-up times of 10 minutes or less. 14foot hydraulic tipping grid enables simplified discarding of larger material.The heavy-duty, high-energy, two-bearing, 12-foot by 5-foot screen box offers 112 square feet of screening area.

Ace Equipment Sales, Inc. and Milroy and Company LLC 171 Tolland Turnpike (Route 74) • PO Box 535 • Willington, CT 06279

Call CJ (413) 896-0793 • (860) 429-2793 Go to www.acecrushers.com for a complete listing and description of our new and used equipment.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 73

Get the Big Picture Whether you are looking ffor or portable track-mou unted jaws or trackmounted cones or track-mounted screeners, Whitney & Son in partnership t hi with ith Metso t has h the th produc d ts t and d exxperience i you are looking for. Since 1964, we have been working har h d for the right to call ourselves experts in the field.

Serving all of New England Committed to Customer Support Since 1964! 95 Kelle ey Avenue Fitchburg, MA 04120

Aggregate producers call Whitney & Son ffo or products like the LLTT106 and LLT200 T200 crusher. The only track-mounted crusher on the market that is road legal.

800-24 45-5472

Metso New England distributtor or for aggrreg egate and quarry ry customers o

info@whitne eyandson.com

Page 74 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

EVO O 10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361

38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

12051 Tac Court Manassas, VA 20109 703/257-2381 Fax: 703/257-2383

450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

ELLIOTT & FRANTZ, INC. WWW.ELLIOTTFRANTZ.COM

Rockster, Equip Sales Help Biz Turn Junk, Debris Into Cash CORPS from page 55

projects started to put their newly formed company on the map. Along with that, the stockpile of construction demolition debris in their yard continued to grow. The two started to periodically rent a Rockster R900 portable tracked impact crusher from Equip Sales and Leasing in North Haven, Conn. “The great part about renting this impact crusher from Equip Sales and Leasing was that it came with an experienced operator,” Randazzo said. “The Rockster R900 was initially an expensive, intimidating machine, and being able to rent it with an operator and have it brought into our yard to turn our stockpiles of construction demolition into usable aggregate was very appealing. “Even with the cost of the rental and the operator, we started to turn a pile of discarded junk in our yard into cash. The machine was making a couple of different products for projects that we were working

on, including a very nice 4purchasing, their operator inch minus product and a 1became our trainer. inch minus product. “Since we made the pur“I was impressed to find chase, Equip Sales and out that if need be, the Leasing has always been machine could make up to there for us, whether it’s parts three different products in a or needing a service technisingle pass. It was very cian, they have never let us mobile and very fuel effidown.” cient, which made it costAnd according to effective. Right away, we Randazzo, the crusher has knew that we needed to own run failure free, with the one." exception of situations creatThe two started a search ed by human error. process, investigating the “Right out of the gate, the many different portable Rockster has been a center of tracked crushers that are profit for us. The Cat power available in today’s marketplant has operated trouble place, and in the end, they free 50 hours a week since ended up making the pur- In addition to excavating and custom crushing, Corps Materials is avail- the day we purchased it.” chase of the Rockster R900 able for equipment hauling. For more information on impact crusher. Corps Materials, call “There are just features with the hard rock like granite or trap rock, process. 860/296-0225. “Right from the start, they were Rockster that we could not find we prefer to use a jaw approach to For more information on anywhere else,” Randazzo said, break the stone, and the Rockster willing to do things that no one else Equip Sales and Leasing, call was willing to do, such as renting 800/529-2515 citing the ability of the impact gives us that flexibility.” or visit Corps Materials’ history and us a machine with an operator. www.equip-sales.com. crusher to be adapted to become a jaw crusher when the conditions relationship with the people at That took so much pressure off us, For more information Equip Sales and Leasing also particularly during our first attempt on Rockster, visit www.rockstercall for a jaw. “When we get into extremely helped in the decision-making at crushing. As we moved closer to northamerica.com.  CEG

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 75

PRO OVEN UPTIME WITH UPTIME K KITS SENNEBOGEN, in keeping with their philosophy to maaximize uptime, uptime has created UPTIME Kits. W Whether you are a service technician in-house or on the road, these kits have everything you y need for every service, maintenance and PM task in one place. They were created to save you time and money. Managing hundreeds of related service parts, from belts and nuts to O-Rings and special tools becomes eassy with a single part number to order and stockk.

PURP POSE-BUIILT

FROM THE T GROUND D UP

They are: • Easy to order an nd easy to stock Ţ 1BDLFE XJUI KPC C TQFDJŻD components an nd tools • Ideal for stockin ng service shops and trucks Choose from the following f kits: • Central lubricattion system kits • Preventive main ntenance service kits • O-Ring kits • Electrical servicce kits • Hydraulic servicce kits And the best thing is that these kits, in stock and ready to go, are custom-built to match your machine mo odel and series. Count on 4&//&#0(&/ UP NFFU ZPVS OFFET JO UIF ŻFME or in-house. For m more information on UPTIME Kits scan the QR code. Kits, code

TYLER EQUIPMENT CORP. East Longmeadow, MA 413-525-6351 Berlin, CT 860-356-0840

www.tylerequipment.com

See how SENNEBOGEN ENNEBOGEN can purpose-build the right maachine for you

www.seennebogen-na.com | +1-704--347-4910

KOMATSU AMERICA CORP.

ANDERSON EQUIPMENT CO.

Danbury, CT 203-743-0088

Holbrook, NY 631-563-7600

Hatfield, PA 215-822-0145

Pleasant Valley, WV 304-366-3075

East Montpelier, VT 802-223-9689

Latham, NY 518-785-4500

Gorham, ME 207-591-5482

Laurel, DE 302-715-5382

Yonkers, NY 914-738-5100

Wilkes-Barre, PA 570-824-9891

South Charleston, WV 304-756-2800

Tonawanda, NY 717-877-1992

Watertown, NY 315-788-5512

Bangor, ME 207-942-0177

South Plainfield, NJ 908-561-9000

Frackville, PA 570/874-6140

Lancaster, NH 603-788-5591

Henrietta, NY 585-334-6770

Endicott, NY 607-748-3400

Winslow Township, NJ 856-767-5900

Harrisburg, PA 717-652-3190

Manchester, NH 603-627-7696

Syracuse, NY 315-463-8673

Allegany, NY 716-372-8822

www.andersonequip.com

Page 76 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

MB Crusher Helps Cozy, But Cramped Croatian Town Lay New Water Pipes Brodarica in Croatia is a small and peaceful holiday village by the sea. Its catchword is relax. This small cozy area offers amenities where tourists and local families can have a pleasant time. All easily achieved, until recently, when the water mains change became imperative. The quiet in this coastal village could be jeopardized by the major work that needed to be done in the city roads as the road surface needed to be removed in depth to lay the new water pipes. To complicate the matter in this area, the villas and the private houses are separated by paths 6.5 ft. wide; there is barely room to move. So the machines to use needed to be compact and precise. A daunting task for the contractor, they needed to identify the way to go along the roads, dig 7.2 ft. deep and lay the new water pipes without inconveniencing the residents. To do a major work in a residential area is a complex operation. Worsened, in this case, by the lack of space. Not to mention the need to operate in respect of the residents’ security. Tapping the road surface with a hammer proved to be unfeasible because of the vibrations that it caused due to the presence of other pipes and the excessive time frame. To save the day and overcome this challenge an MB Crusher drum cutter MB-R500 attachment was called in. Control, low vibration and compact size are just a few of the advantages this unit has, according to the manufacturer. Mounted on a Takeuchi TB-290-2, the drum cutter managed with ease to grind through the hard limestone typical of the Dalmatian region. How They Did It A compact excavator that can move through the small pathways between houses and private gardens, the MB Crusher drum cutter MB-R500 can grind the limestone with precision and speed, despite the presence of existing pipes. The preparation phase for replacing the underground water mains in this town is undergoing, residents continue to live in the building during the pipeline renovation and the job is keeping the time scheduled. It is always matter of choosing the right equipment for the job, to get the job done right. The MB Crusher cutterhead MB-R500 is the smallest of the line, it weighs only 661 lbs. and its powerful grinder has a diameter of 19.6 in., plus it has several accessories that can be chosen based on the task ahead. If working in enclosed spaces, or on busy roads this rotary

Mounted on a Takeuchi TB-290-2, the drum cutter managed with ease to grind through the hard limestone typical of the Dalmatian region.

MILTON CAT www.miltoncat.com Contractor and recycling customers in ME, RI, VT, NH, MA, and state of NY, excluding New York City and surrounding counties.

100 Quarry Drive Milford, MA 01757 508-634-3400

16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586

14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200

79 Robertson Blvd. Brewer, ME 04412 207-989-1890

84 Concord Street North Reading, MA 01864 978-276-2400

500 Commerce Drive Clifton Park, NY 12065 518-877-8000

2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350

294 Ainsley Drive Syracuse, NY 13210 315-476-9981

Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 30 Industrial Drive Londonderry, NH 03053 603-665-4500

55 Industrial Park Drive Binghamton, NY 13904 607-772-6500 4610 E. Saile Drive Batavia, NY 14020 585-815-6200

WHITNEY & SON, INC. www.whitneyandson.com Aggregates and quarry customers in CT, MA, ME, NH, RI, and VT.

95 Kelley Ave. Fitchburg, MA 01420 800-245-5472 978-343-6353 info@whitneyandson.com

The villas and the private houses are separated by paths 6.5 ft. wide; there is barely room to move. So the machines to use needed to be compact and precise.

cutter can be equipped with a drum cover kit to reduce dust emission and stones jolting away. When milling is required to a specific depth, the cutting depth adjustment kit is the right accessory to use. For more information, visit www.mbcrusher.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 24, 2020 • Page 77

CB

Con-Agg

CB CON-AGG

Metso Nordtrack™

A Division of Cleveland Brothers

www.cbconagg.com 2009 State Rd. Camp Hill, PA 17011

888-725-4903 717-561-3339 Aggregates, quarry, contractor, and recycling customers in the state of PA. Locations: 5300 Paxton Street Harrisburg, PA

4565 William Penn Hwy. Murrysville, PA

Old Town Rd & Rte. 879 Clearfield, PA

168 Industrial Park Road Somerset, PA

11 Progress Drive Cranberry Twp., PA

2955 Stewart Drive State College, PA

3950 Depot Road Erie, PA

Rt. 54 & I 180 (Exit 5) Turboville, PA

1500 S. Altamont Blvd. Frackville, PA

Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA

145 Rose St. Indiana, PA

4326 Oregon Pike Lancaster, PA

3105 Route 219 Lantz Corners, PA

309 Foothills Lane Mount Pleasant, PA

US Rt. 6 East Mansfield, PA

441 Route 315 Hwy. Pittston, PA

FOLEY, INC. www.foleyinc.com Contractor and recycling customers in NJ, eastern PA, and northern DE. 855 Centennial Ave. Piscataway, NJ 08854 732-885-5555

2975 Galloway Rd. Bensalem, PA 19020 215-639-4300

650 S. Egg Harbor Rd. Hammonton, NJ 08037 609-561-0308

5102 Beekmantown Rd. Whitehall, PA 18052 610-261-4887

720 Pulaski Hwy. Bear, DE 19701 302-328-4131

H.O. PENN MACHINERY CO., INC. www.hopenn.com Contractor and recycling customers in lower thirteen counties of NY, and in the state of CT. 122 Noxon Rd. Poughkeepsie, NY 12603 845-452-1200

783 Bloomingburg Rd. Bloomingburg, NY 12721 845-733-6400

699 Brush Ave. Bronx, NY 10465 718-863-3800

660 Union Ave. Holtsville, NY 11742 631-758-7500

225 Richard St. Newington, CT 06111 860-666-8401 Contact our Aggregate Specialists: In CT call Scott Gilligan 860-461-6534 In NY call Kevin Kretschmer 646-315-2284

Made to make contracting more productive Nordtrack mobile crushers, screens, and conveyors make it easy to get your operations up and running—on time and within budget. With plug-and-play options backed by a global support network, Nordtrack is the dependable choice for contractors to meet production schedules and requirements. Contact your distributor or visit metso.com/nordtrack for more.

Page 78 • June 24, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

SECTION

Attachments Pages 79-86

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Kinshofer’s C40HPX: Low Maintenance, Better Productivity Kinshofer, a global manufacturer of excavator and loader crane attachments, offers a line of cylinderless re-handling clamshell buckets for loading bulk materials. The CSeries clamshell buckets allow for maximum efficiency and productivity while limiting downtime, according to the manufacturer. The flagship attachment of the C-Series, the C40HPX, is ideal for handling cereals, coal and other fine-grained loads. It is designed for use with 18- to 25-ton excavators for loading bulk materials and 20- to 40ton re-handling excavators. “As re-handlers look to process everincreasing bulk volumes, so much depends on choosing the right attachment for the job,” said Francois Martin, Kinshofer North America general manager. “Clamshell buckets remain a first choice for industrial or harbor sites, and the C40HPX includes features that bring maximum productivity and low cost of ownership to those applications.” The C40HPX uses a newly developed drive unit, based on Kinshofer’s HPXdrive, to open and close the two shells simultaneously. Hydraulically driven pistons, running opposed with four helix threads, generate rotation of the grab to deliver full and constant closing force throughout the entire gripping process. This ensures optimal strength and penetration through tough soils and while handling heavy materials. An integrated non-return valve guarantees secure retention of loads, and swivel and bevel are sealed for integrated rotation. The HPXdrive also decreases the C40HPX’s maintenance requirements. The drive’s interior components continually operate in a self-contained oil-bath, eliminating greasing points and increasing service life with very little wear and tear. This results in a 50 percent longer life cycle compared to conventional hydraulic attachments. The compact, cylinderless design also contains fewer protruding parts that risk being damaged during use and makes the HPXdrive resistant to dirt and blows. Additionally, direct access to the rotary feedthrough and motor maximizes maintenance efficiency. As a result, the HPXdrive technology improves service life and ROI while offering higher efficiency, according

to the manufacturer. Kinshofer manufactures the C40HPX clamshell bucket’s cutting edges with HB 500 steel, extending the attachment’s life cycle. This also improves the ability of the shell’s back walls to resist highly abrasive materials. These walls are .31 in. (8 mm) thick. In addition, the C40HPX features hardened shafts and high-strength bronze bearings that improve durability. High-volume, torsion-resistant shells, available in a variety of sizes, ensure optimal loading in every situation. The C40HPX uses Kinshofer’s integrated shell exchange system for fast and easy shell replacement, ensuring operators have the best tool for the job at hand without the need for time- and

Kinshofer offers a line of cylinderless re-handling clamshell buckets for loading bulk materials. The C-Series clamshell buckets, including the C40HPX, allow for maximum efficiency and productivity while limiting downtime.

The C40HPX from Kinshofer is ideal for handling cereals, coal and other fine-grained loads. It is designed for use with 18- to 25-ton excavators for loading bulk materials and 20- to 40-ton re-handling excavators.

cost-intensive carrier machine changes. This allows for maximum flexibility and minimal downtime. The C40HPX also is available with closed shells for handling cereals, coal or other materials that give off a fine dust or open shells for larger aggregate materials. “Our newest clamshell bucket offers operators maximum efficiency with minimal maintenance costs,” Martin said. “Our customers need to handle ever-increasing bulk volumes of diverse materials, especially on industrial and harbor sites where the materials are constantly changing. The C40HPX gives them the

flexibility to easily handle materials with different specific gravities.” The wear-resistant, closed shell design also makes the C40HPX and all re-handlers in the C-Series line ideal for handling cereals and other fine-grained loads. The constant closing force and sleek design gives the C40HPX excellent digging characteristics and makes it ideal for general construction, civil engineering and landscaping, as well as heavy-duty material handling tasks. The attachment also is suited for environmentally sensitive operations. The HPXdrive’s internal oil feed-through and lack of greasing points or external hoses ensures no loss of oil during operation, making the unit ideal for underwater and other applications where contaminate-free operation is required. For more information, visit www.kinshofer.com. 

Page 80 • June 24, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

The XBoom Coupler® is an Exclusive, Patented product. XBoom Coupler® is a Registered Trade Mark and all product name(s), logo(s) and content is Copyright Protected © 2018.

$ISTRACTIONSÀ#AUSEÀ$ESTRUCTION $ISTRACTION GOV

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 24, 2020 • Page 81

Danbury, CT 203/743-0088

Laurel, DE 302/715-5382 Baltimore, MD 410/247-2100 Holbrook, NY 631/563-7600 Yonkers, NY 914/738-5100 Frackville, PA 570/874-6140 Harrisburg, PA 717/652-3190 Hatfield, PA 215/822-0145 Wilkes-Barre, PA 570/824-9891

BIRTH OF A LEGEND CONTACT YOUR LOCAL AREA SALES REPRESENTATIVE TO FIND OUT WHY THE LABOUNTY MSD LEGEND SHEARS ARE THE MOST PRODUCTIVE SHEARS LABOUNTY HAS EVER MADE

TRACEY ROAD EQUIPMENT www.traceyroad.com 6803 Manlius Center Road East Syracuse, NY 13057 315-437-1471 800-872-2390 Albany, NY 518-438-1100 866-740-8853 Kirkwood, NY 607-775-5010 800-370-9488 Queensbury, NY 518-793-9688 833-817-2917 Henrietta, NY 585-334-5120 866-950-6210 Marcy, NY 315-765-8746 800-872-2390 Adams Center, NY 315-788-0200 888-335-0200

COMPANY WRENCH TM

DUAL MAX INDEXABLE PROTECTION

10% MORE FORCE

INSITE EQUIPED

The industry’s only full-protection, indexable, piercing tip

The new MSD 2500 Legend has enhanced jaw geometry resulting in 10% more cutting force at the apex compared to prior model.

InSiteTM pulls information from LaBounty shears to provide performance metrics that help increase productivity and reduce downtime.

TM

/D%RXQW\Ě?|Ě? +Z\ Ě?|Ě?7ZR +DUERUV 01 Ě?|Ě? |Ě?ZZZ VWDQOH\LQIUDVWUXFWXUH FRP EUDQGV ODERXQW\

www.companywrench.com 2636 S Black Horse Pike Williamstown, NJ 08094 856-404-9618 855-562-3526

Page 82 • June 24, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

www.eaglepowerandequipment.com 953 Bethlehem Pike Montgomeryville, PA 18936 215/699-5871 2211 N. Dupont Highway New Castle, DE 19720 302/652-3028 1416 Phoenixville Pike Suite 200 West Chester, PA 19380 610/458-7054

www.contractorssales.com 121 Karner Road Albany, NY 12212-2010 518/456-1445 1283 Dolsontown Road Middletown, NY 10940 845/956-0222

www.highway-equipment.com 22035 Perry Highway Zelienople, PA 16063 724/452-7800 5846 West Road McKean, PA 16426 814/476-7755 4690 Route 219 Dubois, PA 15801 814/371-3600

www.tylerequipment.com 251 Shaker Rd. East Longmeadow, MA 01028 800/292-6351 1980 Berlin Turnpike Berlin, CT 06037 800/352-4473

www.traceyroad.com 6803 Manlius Center Road East Syracuse, NY 13057 800/872-2390 1523 Route 11 North Kirkwood, NY 13795 800/370-9488 19598 Cady Road Exit 44-Watertown Center off Adams Center, NY 13606 888/335-0200

PER ERFORMA O ANC OR CE UND DER R PRE ESS SSURE E Since 1942, Allied® hydr d aulic attachments ha ave consistently stepped up to meet c challenges fro om contractor t s and municipalities who need eed to rent stro onger equipmen uipment with more e reliabili e ty and operating efficiency. Ourr Rammer® and Allied hydr d aulic hammer mers, as we ell as our Ho-P Pac® and Skid-Pa ac® compactors s, are designed to actua ally verify e and improve your carrier rrier ROI decisions decisions. Proving v again and again that nobody dy kno knows how to o delive er h hydr d aulic produc o tivity under prressure e like Allied. Fo or de etails, visit an Allied distribu utor or call 800-321-104 46.

TH HERE’’S S NO SUBS STITUTE FOR EXP E PERIENCE ER RIENCE

ALLIEDCP.com c | 800.321.1046

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 24, 2020 • Page 83

Visit our website for more attachments!

We have an Extensive Used Inventory!

www.nationalattachments.com

USED D PAR A TS T FROM THOMPSON OMPSON MACHINERY HINERY Used Caterpillar® parts from Thompson offer a greatt value for replacing or repairing industrial heavy machinery. And because the part is made by Caterpillarr,, you’ll know w you’re getting a reliable product that won won’t let you doown when you need it most.

• Used Parts and Attachments Cat cabs, OROPS, buckets,s, more • Used, Rebuilt, and Exchange Components Final drive paarts, pumps, differentials, more If we don’t have your part in stock, we can locate it w with our nationwide Parts Locator • Network. We also buy used and salvage equipment.

Call us at 615.259.5820

Check out our inventory online at www.TMCat.com/up

THOMPSON MACHINERY Y

E-mail us at usedparts@TMCat.com

Page 84 • June 24, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Epiroc Introduces HATCON Remote Monitoring Device Epiroc has introduced HATCON, a remote monitoring device for breakers and drum cutters that keeps track of location and operating hours to improve efficiency and safety. The cloud-based platform My Epiroc gives customers notifications about service, creates task lists and provides an overview of the entire fleet. All the data is presented in a straightforward way to simplify both everyday duties and long-term decisions, according to the company. HATCON is available factory mounted or as a retrofit kit for Epiroc premium range breakers and drum cutters. Once connected, the system monitors every individual tool and keeps customers updated via My Epiroc. Notifications about service and wear part alerts are just a few of the features that will help increase efficiency. “HATCON provides a new level of control. You’ll always know where your tools are, what they do, when they need service or if any tool is running more than the other — it basically keeps you ahead. And with My Epiroc, everything from scheduling services to identifying faults and finding new solutions will be much faster and easier. This information will not only help create a

HATCON is available factory mounted or as a retrofit kit for Epiroc premium range breakers and drum cutters.

smoother workflow with less downtime, it can also be vital in reaching overall business goals,” said Torsten Ahr, vice president marketing hydraulic attachment tools, Epiroc. With data available regardless of device, at any moment and even offline, everyone from operators to fleet managers will have a more comprehensive view and be able to take smarter decisions. And since the data also is shared with Epiroc, the company can provide better service, for instance shipping wear parts just in time for a scheduled maintenance stop. For larger fleets with complex logistics the GPS function is a major asset. Knowing the location of every tool also is a great support to customers’ anti-theft system, the company said. “We’ve been longing to provide this service and I’m confident it will be very valuable for our customers — and for us. By adding HATCON to our offer we want to strengthen your business and help you protect your investment,” said Ahr. For more information, visit www.epiroc.com.  The cloud-based platform My Epiroc gives customers notifications about service, creates task lists and provides an overview of the entire fleet.

Once connected, the system monitors every individual tool and keeps customers updated via My Epiroc.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 24, 2020 • Page 85

BR RING SA AFETY, IINNOVA VATION T & DURABILITY Y TO YOUR O JOB B SITE ESCO loader buckets are precision engineered and d feature the Ultralok® too oth system that provides safer and easier tooth replacem ment. Combined with premium mium materials and skilled d fabrication, ESCO delivers vers one of the most durable, high-performance gh-performance buckets available.

Ultralok® Tooth o System y

ESCO Mang ganese Crusher Wear e r Parts

ANDERSON EQUIPMENT COMPANY 1000 Washington Pike Bridgeville, PA 15017

115 Middle Road Henrietta, NY 14467

4176 Route 417 Allegany, NY 14706

412/343-2300

585/334-6770

716/372-8822

C.N. WOOD CO., INC.

7550 Clearfield Curwensville Hwy Clearfield, PA 16830

6317 Thompson Road Syracuse, NY 13206

18 Gorham Industrial Pkwy Gorham, ME 04038

200 Merrimac Street Woburn, MA 01801

JORDAN EQUIPMENT CO.

KOMATSU Danbury, CT

203/743-0888

814/765-5311

315/463-8673

207/591-5482

781/935-1919

18 Blackstrap Road Falmouth, ME 04105

20561 Paint Blvd. Shippenville, PA 16254

912 Albany Shaker Road Latham, NY 12210

Whately, MA

207/797-2240

413/665-7009

814/226-4100

142 Target Industrial Circle Bangor, ME 04401

518/785-4500

207/942-0177

Johnston, RI

35 Daves Way Hermon, ME 04401

436 Riggs Road Somerset, PA 15501

22607 Murrock Circle Watertown, NY 13601

1645 Candia Road Manchester, NH 03109

401/942-9191

207/848-9036

631/563-7600

Avon, MA

744 Clough Mill Road Pembroke, NH 03275

Yonkers, NY

814/443-2867

315/788-5512

2007 Ruskin Drive Pleasant Valley, WV 26554

720 E Franklin Street Endicott, NY 13760

302/366-3075

607/748-3400

2140 Military Road Tonawanda, NY 14150

717/877-1992 www.esco.weir .

603/627-7696 151 Packard Road East Montpelier, VT 05651

802/223-9689

508/584-8484

603/228-3377

www.cn-wood.com

www.jordanequipment.com

South Plainfield, NJ

908/561-9000 Winslow Township, NJ

856/767-5900 Holbrook, NY

914/738-5100

NORTRAX New Canada, ME 04743

Clifton Park, NY

207/834-6701

518/371-5111

Hermon, ME

Gouverneur, NY

207/947-6786

315/287-0703

Houlton, ME

Springfield, VT

207/532-6517

802/885-6840

Westbrook, ME

Williston, VT

207/773-3777

802/658-2121

Pembroke, NH

603/225-2769

www.nortrax.com

www.andersonequip.com Copyright ght ©, WEIR and the WEIR Logo are trademarks demarks and/or registered trademarks off We eir Engineering Services Ltd.

Page 86 • June 24, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Firm Installs Mill-Duty Coil Grab Under Overhead Crane A 37.5-ton capacity mill-duty coil grab has been installed beneath the hook of a 40-ton capacity overhead crane at a Monarch Steel Company Inc. facility in Decatur, Ala. The coil grab was manufactured by The Caldwell Group, a Rockford, Illinois-based company that specializes in both standard and custom lifting equipment. Mazzella Alabama Sling Center, a Caldwell Group distributor, provided the coil grab to the Monarch steel service center, located in Decatur in northern Alabama. The grab replaced a previous coil grab that had become damaged over time; the facility opened in 2004. It is rigged below a 92-ft. span top-running double-girder crane, with a single hoist, manufactured by Zenar. The grab carries coils from the processing machine to a floor storage area, over a distance between 100 and 200 ft. Josh Berryman, lifting specialist at Mazzella Alabama Sling, said, “The crane has a standard hook block, but there is a scale system between the block and hook. The hook-scale assembly is used to monitor the weight of the coils being lifted. The crane and grab are operated by a single operator in a standing position, using radio remote control.” He explained that the coils are typically the same size but do vary in dimensions and weigh up to a maximum of 75,000 lb. (37.5 ton). The

“Mill-duty”, as displayed on the coil grab, refers to the high level of work cycles that the equipment is designed for, explained Josh Berryman, lifting specialist at Mazzella Alabama Sling.

maximum outer diameter is 80 in., while the largest inner diameter is 20 in. Coil widths range from 25.5 to 76 in. The crane is Service Class 3 and Crane Manufacturers Association of America (CMAA) Class D, meaning it is rated for heavy service application. The grab is ASME BTH-1 Design Category B, designated when the conditions of the lift are not always defined or predictable, or when load conditions could be severe. Monarch’s customer base includes appliance manufacturers and the auto industry. The tier 1 and tier 2 suppliers to the auto assembly plants rely on these steel service centers, which act as a bridge between metal producers and end consumers. Monarch is headquartered in Cleveland and is one of the country’s largest providers of hot rolled, cold rolled and galvanized steel product. In addition to the site in Decatur, a third service center is located in Cadiz, Ky. For more information, visit www.caldwellinc.com. 

Trucks & Trailers

SECTION

Pages 87-93

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Stellar Industries Celebrates 30 Years of Innovation

Stellar Industries Inc. celebrated its 30th anniversary on May 9.

Stellar Industries Inc. celebrated its 30th anniversary on May 9. While the world continues to change daily, the Iowa-based manufacturer took a moment to recognize three decades of work truck innovation designed to power customer productivity. Stellar was founded in 1990 in Garner, Iowa, by three ambitious entrepreneurs: Francis Zrostlik, Jim Vlaanderen and Gary Bomstad. Stellar began as the first United States corporation to design and manufacture a domestic hydraulic hooklift hoist. Since its inception, Stellar has added the design and manufacture of numerous products for construction, waste, mining and many more work truck industries. Other products include mechanics trucks, service cranes, mobile drawer systems, commercial tire service trucks, lube systems and fuel trailers. Through the participation in association-sponsored events;

hosting equipment training classes; product design; and valuing customer partnership, Stellar has become a well-known name within the industries it serves. From a small-town company with big dreams to a bigtime manufacturer with grass-roots values, Stellar is proud to be a leader in innovation and industry standards after 30 years. Although they may not have been able to gather in celebration this year, Stellar Industries employees spent the week celebrating with their team and community through videos, photos and trivia on their social media channels. “Stellar Industries is proud to have been founded as an entrepreneurial start-up using the knowhow of dedicated north Iowans to build the strong company that exists today,” said Dave Zrostlik, president of Stellar Industries. “Our transition to a majority ESOP company over these 30

Stellar began as the first United States corporation to design and manufacture a domestic hydraulic hooklift hoist.

years is further proof of the commitment we have to remain an independent company that quickly responds to the needs of our customers, our employees and our communities. “I have great confidence and pride in the team members that have grown with us to create the

successful company that Stellar Industries has become. Thanks go out to all those past and present Stellar employees and the communities that have supported us over the past 30 years. I am looking forward to successful growth and prosperity for the employee-owners of Stellar Industries for the next

30 years.” About Stellar Industries Stellar Industries Inc. was founded in 1990 in Garner, Iowa. It is an employee owned and operated manufacturer of hydraulic truck mounted equipsee STELLAR page 88

Page 88 • June 24, 2020 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Stellar Gives Thanks for 30 Successful Years in Business Products of Stellar Industries include mechanics trucks, service cranes, mobile drawer systems, commercial tire service trucks, lube systems and fuel trailers.

Cleveland Brothers 4565 William Penn Highway Murrysville, PA 15668 866-551-4602

Milton CAT 100 Quarry Dr Milford, MA 01757 508-634-3400

Erie 3950 Depot Road Erie, PA 16510 814-898-3388

84 Concord St North Reading, MA 01864 978-276-2400 978-276-2410 Parts

Somerset 168 Industrial Park Road Somerset, PA 15501 814-445-7915

14 Kendrick Rd Wareham, MA 02571 508-291-1200

Clearfield 1307 S Second Street Clearfield, PA 16830 814-765-1611 Mansfield 18512 Route 6 Mansfield, PA 16933 570-662-7171

STELLAR from page 87

ment. Products include hooklift hoists, cable hoists, container carriers, telescopic cranes, articulating cranes, and work truck accessories. Stellar also offers complete mechanic

service truck and tire service truck packages. Stellar is a progressive company that focuses on its people, as they are the key to making the products and the company successful. For more information, visit stellarindustries.com. 

Fleet Advantage Announces New Sale-Leaseback Program Fleet Advantage announced a new Sale-Leaseback program designed to infuse cash and flexibility into transportation fleets. Fleet Advantage developed this program to help fleet organizations substitute for lost revenues during the current COVID-19 pandemic. In Fleet Advantage’s Sale-Leaseback program, a company can select the assets from their fleet that are older models, which are inefficient and more unreliable, and Fleet Advantage will purchase those assets and lease them back to the fleet for an interim period until they can then transition to new equipment when ready. This enables organizations to generate cash in the near term, which is especially critical today given the COVID-19 pandemic and strain it has placed on companies and the economy. The cash gained can then be used for immediate internal needs or to simply provide extra working capital.

Combating Economic Fallout Without Compromising Future Growth The transportation fleet industry has continued to look for ways to absorb the sharp economic decline as a result of the pandemic. The SaleLeaseback program allows for the downsizing of fleets if an organization has a surplus of trucks, and it will have a positive effect on the bottom line P&L since the ensuing lease payment will be lower than the current depreciation charge. “We’re launching this program to help our clients with transportation fleets realize an immediate infusion of cash and flexibility into their organizations,” said John Flynn, CEO of Fleet Advantage. “Having additional cash on hand is critical for today, but the flexibility to upgrade to newer truck technology with advanced safety features tomorrow will help fleets come out of the pandemic with a significant competitive edge through financial and operational efficiencies gained.” For more information, visit www.fleetadvantage.com. 

Lantz Corners 3105 Route 219 Kane, PA 16735 814-778-5250 Mount Pleasant 309 Foothills Lane Mt. Pleasant, PA 15666 724-696-4080 Turbotville 190 Cleveland Brothers Road Watsontown, PA 17777 570-538-2551 Lancaster 4326 Oregon Pike Ephrata, PA 17522 717-859-4905 State College 2955 Stewart Dr. State College, PA 16801 814-237-8338 Harrisburg 5210 Paxton Street Harrisburg, PA 17111 717-564-0598 Wilkes-Barre 970 Wilkes Barre Twp. Rd. Wilkes-Barre, PA 18702 570-822-8141 Clarksburg 6286 West Veterans Memorial Highway Bridgeport, WV 26330 304-842-2222 Shinnston 5541 Benedum Drive Shinnston, WV 26431 304-592-5855 www.clevelandbrothers.com

4610 E Saile Dr Batavia, NY 14020 585-815-6200 585-815-6250 Parts 500 Commerce Dr Clifton Park, NY 12065 518-877-8000 518-877-6860 Parts 55 Industrial Park Dr Binghamton, NY 13904 607-772-6500 607-251-6550 Parts 294 Ainsley Dr Syracuse, NY 13210 315-476-9981 315-703-7042 Parts 79 Robertson Blvd Brewer, ME 04412 207-989-1890 207-991-3130 Parts 16 Pleasant Hill Rd Scarborough, ME 04074 207-883-9586 207-885-8045 Parts 30 Industrial Dr Londonderry, NH 03053 603-665-4500 603-665-4510 Parts 150 Cat Lane Richmond, VT 05477 802-434-4228 802-434-7810 Parts 2158 Plainfield Pike Cranston, RI 02920 401-946-6350 www.miltoncat.com

Bobcat of North Jersey 201 Maltese Dr. Totowa, NJ 07512 973-774-9500 www.njbobcat.com

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • June 24, 2020 • Page 89

 � � � � �

 Â

­  €

€ €

Â?

‚

Â? Â? Â? Â? Â? Â? Â? Â Â

Asphalt Care Equipment Inc. 2765 Galloway Rd. Bensalem, PA 19020 215-639-9800 www.asphaltcare.com

Douglas Equipment & Supply Co. 7100 Kreidler Rd. York, PA 17403 717-428-1517 www.douglasequip.com

Metro Bobcat, Inc. 8250 Beechcraft Ave. Gaithersburg, MD 20879 301-840-9300 33 West Old Liberty Rd. Eldersburg, MD 21784 410-795-1500

FOLEY Inc. 855 Centennial Avenue Piscataway, NJ 08854 732-885-5555

Bobcat of Connecticut, Inc. 54 Alna Lane E. Hartford, CT 06108 860-282-2648

650 S. Egg Harbor Road Hammonton, NJ 08037 609-561-0308

Bobcat of Stratford 821 Woodend Road Stratford, CT 06615 203-380-2300

2975 Galloway Road Bensalem, PA 19020 215-639-4300 5102 Beckmantown Road Whitehall, PA 18052 610-261-4887 720 Pulaski Highway Bear, DE 19701 302-328-4131 www.foleyinc.com

Bobcat of Greater Springfield 181 Wayside Ave. West Springfield, MA 01089 413-746-4647 www.bobcatct.com

11000 Pulaski Hwy White Marsh, MD 21162 410-483-0600 7002 Marlboro Pike, Forestville, MD 20747 301-568-1104 www.metrobobcat.com

Monroe Tractor & Implement 1001 Lehigh Station Rd Henrietta, NY 14467 585-334-3867 6 Equipment Dr Binghamton, NY 13904 607-754-6570 5035 Genesee St Buffalo, NY 14225 716-681-7100

9052 Marshall Road Cranberry Township, PA 16066 724-742-2844 888-DITCHWITCH www.ditchwitchmidstates.com

8194 State Route 415 Campbell, NY 14821 607-739-8741 423 Old Loudon Rd Latham, NY 12110 518-785-8013

Robert H. Finke & Son, Inc. 1569 Route 9W Selkirk, NY 12158 518-767-9331 www.finkeequipment.com

Ditch Witch Mid-States 3660 Interchange Road Columbus, OH 43204 614-443-9751 888-DITCHWITCH

7300 Eastman Rd N Syracuse, NY 13212 315-452-0000 www.monroetractor.com

H.A. DeHart & Son 311 Crown Point Rd. Thorofare, NJ 08086 856-845-2800 www.hadehart.com

Â? Â? Â? Â? Â Â?

Page 90 • June 24, 2020 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

What can you haul in a side dump trailer? Nearly anything.

Superior Stability

Faster Cycle Times

Easier Unloading

With construction grade tires and an ability to haul dirt, rock, millings, riprap and other materials, our trailers help solve the everyday challenges of the construction industry. When we build trailers, we build solutions. 800-779-8099 • sidedump.com

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • June 24, 2020 • Page 91

Lowboys That Load Front & Rear... The Ultimate In Versatility!

%H SUHSDUHG IRU DQ\ ORDGLQJ VLWXDWLRQ ZLWK RXU GSL/BR VHULHV RI ORZER\V

35 GSL/BR

Â&#x2021; &$3$&,7< OEV

35 Ton Detachable Gooseneck Wetline, Dual Axle Single Point Suspension, W/Beavertail and Ramp (Optional Air Ride)

50 GSL/BR

Â&#x2021; &$3$&,7< OEV

50 Ton Detachable Gooseneck, Three Axle Air Ride, W/Beavertail and Ramp

Lowest Loading Angle Available!

35 GSL/PT Â&#x2021; &$3$&,7< OEV

35 Ton Detachable Gooseneck Wetline, Dual Axle Air Ride Suspension, with 4' Rear Riser, Wheel Covers,Taper Beam Design

50 GSL/PT Lowest Loading Angle Available

Â&#x2021; &$3$&,7< OEV

50 Ton Detachable Gooseneck Wetline, Tri Axle Air Ride Suspension, with 4' Rear Riser, Wheel Covers, Taper Beam Design

70

th

ANNIVERSARY Visit our web site at EagerBeaverTrailers.com and you're a "click" away from getting all the information you need from our nearest dealer, or call 1-800-257-8163

1946-2016 >> EagerBeaverTrailers.com

Page 92 • June 24, 2020 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Mack, ATA Team Up With American Logistics to Deliver Vital Aid, Goods To assist those impacted by the coronavirus pandemic, Mack Trucks and the American Trucking Associations (ATA) are partnering with the American Logistics Aid Network (ALAN) to deliver vital supplies, such as food and personal-care items, to nonprofit organizations who distribute these goods locally. “In good times and bad, the trucking industry moves nearly three-quarters of our nation’s freight, helping To assist those impacted by the coronavirus pandemic, Mack Trucks and the ensure crucial supplies are American Trucking Associations (ATA) are partnering with the American Logistics delivered where they are Aid Network (ALAN) to deliver vital supplies, such as food and personal-care items, to nonprofit organizations who needed,” said Martin distribute these goods locally Weissburg, president, Mack using the ATA Share the Road Trucks. “Working in partner(pictured) and Workforce ship with ATA and ALAN Heroes Mack Anthem models. enables us to more effectively marshal resources and deliver supplies to organizaThe Mack Anthem Workforce tions addressing the needs of Heroes model is helping deliver vital supplies. local communities across the country.” Two model year 2019 Pinnacle axle back model made its Mack Anthem models, maiden voyage to New Orleans which Mack provided to the ATA as part of its sponsorship of the Share the Road and with a truckload of water.” ALAN was contacted in April by Feed the Children, a Workforce Heroes programs, are now delivering shipments of supplies between nonprofit organizations, including Feed leading hunger relief organization fighting to end childhood the Children and Joshua’s Heart Foundation, among others. hunger by distributing food and other essentials for daily livProfessional truck drivers from ATA member companies ing through its network of community partners across the country. As the response to the coronavirus pandemic began have volunteered their time to make the deliveries. Since the ATA’s Share the Road and Workforce Heroes impacting traditional distribution efforts, Feed the Children live safety and career education efforts have been postponed began looking for solutions to ensure its tens of thousands of or cancelled due to shelter-in-place requirements and other pounds of food and beverages, personal care items and launsafety precautions, Mack and ATA released both Anthem dry detergent located in its LaVergne, Tenn., warehouse made its way swiftly to non-profit partners around the counmodels to make deliveries coordinated through ALAN. “Given all of the supply chain chaos surrounding COVID- try. It was critical to them to make sure the ever-growing 19, it would have been easy for these organizations to press needs of those affected by the pandemic could be met. One of those community partners is the Miami, Fla.-based the pause button on their charitable program until the crisis was past,” said Kathy Fulton, ALAN’s executive director. Joshua’s Heart Foundation. Founded in 2005 by a then 4“But we’re so thankful they didn’t, because trucking is year-old Joshua Williams, the organization is dedicated to always one of our non-profit partners’ biggest needs. And the fight against global hunger and poverty. “Our mission is to empower needy people to improve these vehicles are allowing us to support many relief efforts their quality of life by providing them necessities like groin a really big way.” The partnership between the ATA and ALAN traces back ceries and personal items,” said Williams, Joshua’s Heart several years and through several natural disasters. ALAN, Foundation founder and chief changemaker. “Like all organwhich was founded in 2005, provides supply-chain assis- izations, the pandemic has affected our ability to receive and tance to disaster relief organizations and other non-profits by distribute goods, making the shipments from Feed the connecting them with transportation resources during a cri- Children through ALAN critical to our efforts.” Mack and ATA will continue to coordinate transport solusis. In addition to connecting non-profits in need with transportation solutions, ALAN helps humanitarian organizations tions with ALAN until demand subsides. For more information about ALAN, visit make every logistics dollar count. “ATA’s relationship with ALAN dates to their creation, https://www.alanaid.org/. To learn more about Feed the following the devastation wrought by Hurricane Katrina in Children and the Joshua’s Heart Foundation, visit 2005,” said Elisabeth Barna, executive vice president, indus- https://feedthechildren.org and https://joshuasheart.org. To try affairs, ATA. “At that time, our Share the Road Mack learn more about ATA, visit www.trucking.org. 

Tracey Road Equipment www.traceyroad.com 6803 Manlius Center Road East Syracuse, NY 13057 315-437-1471 800-872-2390 1523 Route 11 North Kirkwood, NY 13795 607-775-5010 800-370-9488 300 Middle Road. Henrietta, NY 14467 585-334-5120 866-950-6210 19598 Cady Road (Exit 44 - Watertown Center - off I-81) Adams Center, NY 13606 315-788-0200 888-335-0200 115 Railroad Ave. Ext. Albany, NY 12205-0306 518-438-1100 866-740-8853

Chappell Tractor www.chappelltractor.com 454 Route 13 South Milford, NH 03055 800-698-2640 251 Route 125 Brentwood, NH 03833 800-616-5666 391 Loudon Rd. Concord, NH 03301 800-358-6007

Construction Equipment Guide â&#x20AC;¢ Truck & Trailer Section â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ June 24, 2020 â&#x20AC;¢ Page 93

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV

?- /+. ? -69*, )\PS[ [V ZWLJ ^P[O ^VVK PUSHPK ¢ HWW_ [Y\UUPVU HWWYVHJO ^P[O IVS[ VU ^OLLS JV]LYZ JLU[LY [Y\UUPVU HUK THPU KLJR JLU[LY ^VVK PUSHPK » ^VVK PUSHPK ILH]LY[HPS HUK YHTWZ )VSK @LSSV^ WHPU[ ZWHYL ^OLLS [PYL TV\U[LK [V NVVZLULJR

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

Stephenson Equipment, Inc.

Vermeer All Roads

www.stephensonequipment.com Trailer Sales Contact John Connor 302-521-2601 135 Lincoln Avenue Prospect Park, PA 800-220-4033 610-534-0700

Harrisburg, PA Pittsburgh, PA Butler, PA Ebensburg, PA Wilkes-Barre, PA Albany, NY

Danbury, CT 203-743-0088 South Plainfield, NJ 908-561-9000 Winslow Township, NJ 856-767-5900

Holbrook, NY 631-563-7600 New York City, NY 718-626-3331 Yonkers, NY 914-738-5100

www.vermeerallroads.com 8830 Corridor Rd. Manassas, VA Annapolis Junction, MD 877-661-6566 20701 Ashland, VA 301-498-5200 800-552-2074 800-492-1274

Page 94 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195

Excavator, Backhoe & Loader Buckets, New & used, over 500 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

13-14 AP

BUCKETSBOX: GRAVEL, BEDDING BOXES DUMP HOPPERS SKID STEER ATTACHMENTS

NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE Joseph Fazzio Inc.com • 856-881-3185 N.J.

13-14 TM

EXCAVATOR, MINI EXCAVATOR & BACKHOE BUCKETS ALL FULLY DRESSED W/ PINS & SIDE CUTTERS

Joseph Fazzio Inc.com • 856-881-3185

13-14 TM

PLATE

96” X 240” & LARGER ALL THICKNESSES - PREMIUM GRADE A570-50 ALSO - LARGE STEEL ANGLES

JFISTEEL.COM • 856-881-3185

13-14 TM

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. Additional $25 to place online • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 866-294-6103 13-14 EB

Lowboy Trailer Pin On Flip Axles, In Stock, 275/Tires, Aluminum Wheels 610/534-0700 John at Stephenson Equipment 13-14 TM

2006 Ditch Witch SK650, 2700 Hours, Good Condition .. ....................................................................Call For Price 13-14 EB Call Tania 614-443-9751 x237

KLEMM Launches KR 704-3G Drilling Rig KLEMM Bohrtechnik has just started the market launch of the newly developed drilling rig KR 7043G — the next generation within the widely used KR 704 series. Designed for challenging drilling operations in urban environments and also within existing buildings, the new model

scores with high performance, compact dimensions and low weight. It is powered by a 55 kW diesel engine that meets the latest EU and U.S. standards. The option to use telescopic drill masts and the low base carrier width of 37 in. (95 cm) makes the KR 704-3G practical for drilling operations in difficult surroundings with narrow doorways and low ceiling heights. The kinematics of the drill mast allow a lateral pivoting of the drilling axis (+/- 45°), which improves maneuverability and allows drilling points in building corners to be reached. Special civil engineering tasks, in particular micropiles for foundations and the underpinning of existing foundations with high-pressure injection columns, can thus be carried out under difficult conditions, according to the manufacturer. The hydraulic system of the rig is equipped with a load-sensing pump

Designed for challenging drilling operations in urban environments and also within existing buildings, the KR 704-3G scores with high performance, compact dimensions and low weight.

and a load-independent volume flow control. The system pressure for the drilling functions was increased to 350 bar. This concept also permits the operation of a hydraulic drifter. All functions are radio remote controlled as standard, which offers numerous advantages for operating personnel when working in confined spaces. The system complies with EN 16228, whereby “Special Protective Mode” (SPM) is available for work without a separating protective device under special conditions and “Restricted Operation Mode” (ROM) is available for drill rod changes. Like almost all KLEMM drilling rigs the KR 704-3G features the Energy-EfficiencyPackage (EEP). Fuel consumption and noise emissions are considerably reduced. The functional safety of the machine controls complies with Performance Level C (ISO 13849), making it extremely resistant to faults and failures, according to the manufacturer. Depending on the customer requirements and the drilling task, the rig can optimally be equipped with different drill masts and a wide range of accessories. In June, the first KR 704-3G was handed over to long-standing KLEMM customer GbE Grundbau Essen. Shortly thereafter it will be used for drilling and grouting operations on its first job site in Germany. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 95

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): BATTERY BOX FOR A KOMATSU PC170LC-11. EMAIL: MROBERSON@ LYLEMACHINERY.COM PHONE: 601-624-1124 –––––––––––––––––––––––––––––––– WANTED (FL): MORBARK 4600XL GRINDER. EMAIL: RKCLANDDEVELOPMENT@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): TRANSMISSION FOR EARLY '90S VINTAGE P&H CENTURY RT50. EXISTING IS A SHINKO RCM2509B S/N 0005. PARTS OR SUBSTITUTE TRANNY OR ENGINE/TRANS CONSIDERED. EMAIL: MIKE.SMITH@ CERTIFIEDBOOMREPAIR.COM PHONE: 813-247-1963 –––––––––––––––––––––––––––––––– WANTED (CA): BOBCAT T550 COMPACT TRACK LOADER. EMAIL: CINDYLARK4@MSN.COM –––––––––––––––––––––––––––––––– WANTED (PA): REXWORKS INC MAXIGRIND 425 GRINDER. EMAIL: HENRYINDUSTRIES@YAHOO.COM; PHONE: 814-371-8010 –––––––––––––––––––––––––––––––– WANTED (PA): FORD F700 HOOK LIFT TRUCKS - WORM GEAR AND SHAFT ASSEMBLY FOR COMPACT MODEL H-L SIDE-O-MATIC BOOM UNLOADER COMPACT 2 7-63-5C DICO CONTINUOUS SERIES. EMAIL: INFO@LESNEYCONCRETE.COM PHONE: (724) 224-8703 –––––––––––––––––––––––––––––––– WANTED (USA): HYUNDAI ATTACHMENTS - LOOKING FOR A GOOD USED GP BUCKET 4-6 CU.YD. FOR A 1996 HYUNDAI HL770 LOADER. EMAIL: DONNIE@RADIATIONCLEANTECH.COM; PHONE: 601-319-9453 –––––––––––––––––––––––––––––––– WANTED (NY): BANDIT 65 WOOD CHIPPER - USED BRUSH BANDIT 65XP, 75XP, 2002 OR NEWER, 35HP MINIMUM. EMAIL: DSPTECH11@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX400LC-1 EXCAVATOR EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR 1000LB FRONT COUNTERWEIGHT FOR CASE 455C CRAWLER LOADER. EMAIL: ROGERPF1@FRONTIERNET.NET; PHONE: 570-639-3058 –––––––––––––––––––––––––––––––– WANTED (US): CAT 311, 312, 315, 320, 325, 330, 336 CL,DL,EL EXCAVATORS UNDER 8000 HOURS. EMAIL: REBUILD@TUSCO.NET; PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: AMPHIBIOUS EXCAVATORS, ALL MAKES AND MODELS, NEW OR USED + ALL MAKE AND MODEL BOOMS AND STICKS LONGER THAN NORMAL + ALL MAKE AND MODEL BROKEN BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 ––––––––––––––––––––––––––––––––

WANTED (US); LOOKING FOR PILOT VALVE 9137384 FOR HITACHI 200LC-3 EXCAVATOR. EMAIL: PJUREKX1@GMAIL.COM; PHONE: 585-492-2449 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR OFFHIGHWAY TRUCKS - I NEED #5 CAT 775D &E ROCK BEDS ONLY. ONLY NEED BEDS. EMAIL: WEBBPAGE1@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS WANTED - SCHWING, PUTZMEISTER, ALLIANCE, CIFA, ETC. ALL MODELS, BRANDS, SIZES. OLD OR NEW! BOOM PUMPS,TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD RETIRED, NO LONGER USED & PARTS PUMPS ALSO PURCHASED. EMAIL INFORMATION A.S.A.P. INSTANT PAYMENT GUARANTEED !! FINDERS FEES PAID!!! EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (PA): I’M LOOKING FOR A PUSH THERMOPLASTIC MACHINE. CAN BE ANY BRAND. EMAIL: HELLOELISA@ICLOUD.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 330-336 DL SERIES EXCAVATORS EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (RI): CATERPILLAR 4+ MISCELLANEOUS EQUIPMENT. I AM HELPING A FRIEND TO FIND A PART FOR HIS CAT MODEL 426, SERIAL #7BC02647, PART #9R383. IT WOULD BE REALLY HELPFUL IF THIS PART WAS AVAILABLE IN EASTERN USA, ESPECIALLY IN THE NORTHEASTERN STATES, AND AVAILABILITY, PRICE, AND SHIPPING ARE IMPORTANT IF THE PART IS AVAILABLE ELSEWHERE. THANK YOU FOR YOUR HELP. EMAIL: JOETTAKIRK@AOL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR D8R CRAWLER DOZER. LOOKING FOR ORIGINAL 2018 D8R CATERPILLAR BULLDOZER. EMAIL: ARABHURUR@GMAIL.COM; PHONE: +251-911513133 –––––––––––––––––––––––––––––––– WANTED (SC): ALL MODELS BRADCO TRENCHING / BORING / CABLE PLOWS; LOOKING FOR 3 PT HITCH 3 OR 4 FOOT TRENCHER 6" WIDE FOR REAR KUBOTA EMAIL: PEPPERJACKPM@YAHOO.COM; PHONE: 803-460-2600 –––––––––––––––––––––––––––––––– WANTED (US): INGERSOLL RAND AIR COMPRESSOR, MODEL 125 CFM. NEED EXHAUST/INTAKE MANIFOLD FOR A CONTINENTAL G193A GAS ENGINE WHICH IS IN THE I/R GYRO FLOW 125 COMPRESSOR. EMAIL: HFINCHTTD@FONTIERNET.NET ––––––––––––––––––––––––––––––––

WANTED (VA): FORD 1920 758B BACKHOE ATTACHMENT. EMAIL: CONWELL1208@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): USED HITACHI EXCAVATORS EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92-332-248-9350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): 1-FINAL DRIVE & CONTROL VALVE ASSEMBLY, 2-ENGINE WIRING HARNESSES, HOODS, DISPLAY MODULES & ECU'S SN #FGY0381 FOR SAMSUNG SE240 LC-3 EXCAVATOR. EMAIL: TVHCSHOP@GMAIL.COM; PHONE: 920-735-1221 –––––––––––––––––––––––––––––––– WANTED (KS): CAT 922B INJECTION FUEL LINE. I NEED ALL 4 FOR MY 1960'S DIESEL FRONT-END LOADER. EMAIL: BLACKNIGHT64R@ATT.NET –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADER 950B, 950E, 966E, 966F, 966FII. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS EX200, EX270LC, EX400, EX400LC. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM. –––––––––––––––––––––––––––––––– WANTED: LINCOLN WELDERS, MODELS 250/300/225. I'D LIKE TO BUY USED MACHINES LOW HOURS. EMAIL: JONATHANDAYTON4@GMAIL.COM; PHONE: 806-292-7452 –––––––––––––––––––––––––––––––– WANTED (CA): JOHN DEERE 330 EXCAVATOR. EMAIL: JIMWLAMBERT@HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (NM): BARBER GREENE BG-225B SLAT CONVEYOR, COMPLETE LEFT SIDE. EMAIL: JR_STRIPING@LIVE.COM –––––––––––––––––––––––––––––––– WANTED (US): LOOKING FOR CME 45 WITH DEUTZ DIESEL DECK ENGINE AND AUTOMATIC HAMMER. ANY CONDITION. EMAIL: GEONETICS@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (IL): HAULOTTE AERIAL LIFT, ALL MODELS. LOOKING FOR A TOWABLE BOOM LIFT. EMAIL: SAWMANDAN@SBCGLOBAL.NET PHONE: 630-553-7612 –––––––––––––––––––––––––––––––– WANTED (MI): ALL MODEL KUBOTA WHEEL LOADERS. EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: 616-813-3642 –––––––––––––––––––––––––––––––– WANTED (NV): CATERPILLAR 14G MOTOR GRADER. EMAIL: SALES1@HIEEQUIPMENT.COM PHONE: 7025295171 –––––––––––––––––––––––––––––––– WANTED (USA): LOOKIN FOR A GOOD USED KOMATSU PC 400-5 EXCAVATOR EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 ––––––––––––––––––––––––––––––––

WANTED (USA): TAKEUCHI TB0-35 AND 135 WITH CABS. RUNNING OR FOR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR COMPACT TRACK LOADERS, USED CATERPILLAR SKID STEER LOADERS 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XE. EMAIL: LSGLOBAL@NVER.COM –––––––––––––––––––––––––––––––– WANTED (USA): A GOOD USED C-12 CAT ENGINE FOR A SHORT NOSE 2000 PETERBILT 379 ROAD TRACTOR. ENGINE TO HAVE CORRECT ECM AND S# BEGINS WITH 2KS , 380 MIN. HP. CONTACT JIM ARNETT JARNETTJR@ORBITSDO.COM; CELL# 937-603-3965. –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR D11 CRAWLER DOZERS - INTERESTED IN PARTS FOR LARGE DOZERS FOR COAL MINES AND AGGREGATE QUARRIES. EMAIL: BIGIRONLUNS87@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 315,320,325,330,336 DL SERIES EXCAVATORS UNDER 8000 HOURS AND WHOLESALE PRICED MACHINES. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: TAKEUCHI MINI EXCAVATORS TBO-35’S WITH CABS, RUNNING MACHINES AND/OR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (NY): LOOKING FOR USED 5 TON WIRE ROPE HOIST TO RUN ON A PATENT TRACK EMAIL: INFO@ BRIDGEHAMPTONSTEEL.COM PHONE: 631-537-2486 –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR 330C L EXCAVATOR - LOOKING TO BUY CATERPILLAR 330CL & 330DL IN GOOD RUNNING CONDITION. EMAIL: RIZ@MEGAEQUIPMENTS.COM PHONE: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS TRENCOR TRENCHING / BORING / CABLE PLOWS. EMAIL:ADMIN@MITCHELLHOPPER.COM PHONE: 432-888-2593 –––––––––––––––––––––––––––––––– WANTED (FL): BOBCAT MT50 COMPACT TRACK LOADERS EMAIL: EIDNKSLJK@ICLOUD.COM PHONE: 6039 2I28 939 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS CATERPILLAR WHEEL LOADERS. LOOKING TO BUY ANY CAT LOADER AT WHOLESALE PRICE. EMAIL: MARKETING@ GCESEQUIPMENT.COM PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (TX): ALL MODELS CATERPILLAR MOTOR GRADERS. EMAIL: MAGDIELLERMA@GMAIL.COM PHONE: 956-432-7379 ––––––––––––––––––––––––––––––––

WANTED (USA): ALL MODELS CATERPILLAR WHEEL LOADERS. CAT 966H OR K WITH UNDER 10,000 HOURS, BUCKET, COUPLER. SET OF FORKS IS A PLUS. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (WV): ALL MODELS TERRAMITE BACKHOE LOADERS - CHECKING PRICES FOR TERRAMITE T7 FRON RIM FOR SERIAL NUMBER 227X0102. EMAIL: EDWINANDDIANA@FRONTIER.COM –––––––––––––––––––––––––––––––– WANTED (FL): CASE CRAWLER DOZERS, ALL MODELS. EMAIL: JABOWEND@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOBELCO K907D EXCAVATORS - MAIN HYDRAULIC CONTROL VALVE (907D) SERIAL #LN7001 TO YG0501. KOBELCO PART # 2436U1165F2, KAWASAKI TAG # KMX15A/23009 ALSO USED ON YUTANI 1986, MODEL 195. EMAIL: PTSCOTT@HTVA.NET –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU ATTACHMENTS - SKELETON BUCKET FOR KOMATSU 220 EXCAVATOR 54" TO 60". CAN ADAPT FROM OTHER MACHINES AS LONG AS ITS 80 MM PINS. EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 –––––––––––––––––––––––––––––––– WANTED (USA): HYDRA-MAC 1700 SKID STEER LOADER. EMAIL: MALONEYFARM.1@ WINDSTREAM.NET –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR EXCAVATORS, ALL MODELS. EMAIL: PAUL@HEAVYSURPLUS.COM; PHONE: 214-625-2652 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D5B OR D6C CRAWLER DOZER. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 970F WHEEL LOADER. EMAIL: SALES3@GCESEQUIPMENT.COM; PHONE: 657-347-6605 –––––––––––––––––––––––––––––––– WANTED (GA): KOBELCO EXCAVATORS, ALL MODELS. MINI- OR MIDIEXCAVATOR. USED. UNDER 2000HRS. CA 35 T0 40 HP FULLY FUNCTIONAL. THUMB EMAIL: JKSAPP@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (US): LIMA CRANE – ANY LIMA 2400B MACHINES IN ANY TYPE OF CONDITION. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D8T CRAWLER DOZER. LOOKING FOR MACHINE WITH ISSUES AND/OR HIGHER HOURS, AT A WHOLESALE PRICE. BUYER WANTS MACHINE CHEAP THAT HE CAN REFURBISH AS NEEDED. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 ––––––––––––––––––––––––––––––––

WANTED (US): YANMAR YFW55R DUMPERS - FINAL DRIVE OR A PARTS MACHINE. EMAIL: ORDERS@LEWEQUIP.COM; PHONE: 724-887-9375 –––––––––––––––––––––––––––––––– WANTED (US): GEHL DL-10H-55 TELEHANDLERS / FORKLIFTS - SN # 10H55JR024028 NEED PART # L71553. EMAIL: JEFF.JAEGER@HOTMAIL.COM; PHONE: 345-925-9709 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT S175 SKID STEER LOADERS; ANY STATE NEAR ARKANSAS WOULD BE HELPFUL. EMAIL: BRIANFITZJURLS@GMAIL.COM; PHONE: 479-847-4202 –––––––––––––––––––––––––––––––– WANTED: LINK-BELT LS-348H CRANE – LOOKING FOR THE BOOM WIRE WRAP FOR A LINK-BELT 348 HYLAB , S/N L9J89965. EMAIL: POWERALEXHEAVY EQUIPMENT@GMAIL.COM PHONE: 386-496-1340 –––––––––––––––––––––––––––––––– WANTED (NH): DYNAHOE 160 BACKHOE LOADERS - I'M LOOKING TO FIND ANY AND ALL INFORMATION ABOUT THIS MACHINE, FORUMS, TROUBLESHOOTING ETC. I HAVE ONE THAT RUNS BUT CAN'T GET IT TO MOVE... HELP PLEASE!! EMAIL: RUSSELLMORRIS66@AOL.COM –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS KOLBERG ASPHALT / CONCRETE / PAVING LOCATED IN TAMPA, FL. LOOKING FOR PARTS FOR A VIBRATING SCREEN. KOLBERG SCREEN. SR # VS514DD1113-91. EMAIL: TODD.BUSH@ PREFERREDMATERIALS.COM PHONE: 407-948-6796 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS UPRIGHT WHEEL LOADERS - LOOKING FOR MANUALS AND SPARE PARTS FOR FURUKAWA WHEEL LOADERS, ANY ASSISTANCE APPRECIATED. EMAIL: DOUG.KLITSCHER@LIVE.COM.AU; PHONE: +61401627855 –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU PC400LC-7L EXCAVATOR - HYD. QUICK COUPLER FOR A 05 PC 400 L7 HD. 100MM PINS. EMAIL: DGMEINER62@GMAIL.COM; PHONE: 315 767-4111 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS JOHN DEERE BACKHOE LOADERS T09310G056237 JOHN DEERE 555G TRACK LOADER WITH BACKHOE, NEED SWING FRAME OR WILL BUY THE WHOLE DETACHABLE BACKHOE IN GOOD CONDITION. EMAIL: JRBUSTA@HOTMAIL.COM; PHONE: 417-668-5978 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR D9L CRAWLER DOZER - CAT D9-L ENGINE COMPLETE IN GOOD RUNNING CONDITION. WEST COAST AREA. BEST DEAL CONTACT DAN. EMAIL: DANCRANE1122@YAHOO.COM; PHONE: 707-433-1122 ––––––––––––––––––––––––––––––––

Page 96 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • San Angelo, TX Wed., June 24, 2020 For: Very Late Model Rental Fleet Auction • Toronto, Canada Thurs., June 25, 2020 For: Unbelievable John Deere Equipment, Mostly in LikeNew Condition • Roaring Springs, PA Fri., June 26, 2020 For: Day 1 of 2. Major Job Completion • ONLINE ONLY Fri., June 26, 2020 For: Late Model Construction Equipment & more (Queretaro, Mexico) • Leesport, PA Sat., June 27, 2020 For: Day 2 of 2. Major Job Completion • Regina, Canada Wed., July 8, 2020 For: Very Large Job Completion

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • Columbus, OH June 25, 2020 • Los Angeles, CA June 26, 2020 • Gonzales, LA June 26, 2020 • Atlanta, GA June 30, 2020 • Salt Lake City, UT June 30, 2020 • Chehalis, WA June 30, 2020 • Fort Worth, TX July 28 - 29, 2020 • Denver, CO August 5, 2020 • Tipton, CA August 12, 2020 • Phoenix, AZ August 28, 2020

• San Diego, CA Thurs., July 9, 2020 For: Largest & Greatest Rental Fleet Equipment Auction

BAR NONE AUCTION www.barnoneauction.com 866-372-1700

• New Waterford, OH Wed., July 15, 2020 For: Part 1 of 2-Day Auction

• Online/Portland, OR Fri., June 26, 2020 For: Monthly Public Auction

• Cleveland/Akron, OH Fri., July 17, 2020 For: Part 2 of 2-Day Auction in two locations

• Online/Sacramento, CA Sat., July 11, 2020 For: Monthly Public Auction

• Cleveland, OH Sat., July 18, 2020 For: Completed Trucking Job • Canastota (Syracuse), NY Fri., July 24, 2020 For: Major Job Completion, Late Model Construction Equipment • Canastota (Syracuse), NY Sat., July 25, 2020 For: Fanciest Late Model Construction Equipment in conjunction with Haycamp & Barbecue!

• Online/Portland, OR Fri., July 31, 2020 For: Monthly Public Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY June 30, 2020 • ONLINE ONLY July 7, 2020 • ONLINE ONLY July 14, 2020 • ONLINE ONLY July 21, 2020

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 All our auctions are now online bidding only! • NE Regional Event June 23 - 24, 2020 • North Franklin, CT June 23 - 24, 2020 • Houston, TX June 23 - 24, 2020

• ONLINE ONLY July 28, 2020 • ONLINE ONLY August 4, 2020 BIG IRON www.bigiron.com 800-937-3558

July 1, 2020 • ONLINE ONLY July 8, 2020 • ONLINE ONLY July 15, 2020 • ONLINE ONLY July 22, 2020

Wed., July 15, 2020 For: Construction, Utility Equipment and more • TIMED ONLINE ONLY Wed., July 22, 2020 For: Construction, Utility Equipment and more

• ONLINE ONLY July 29, 2020

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 DON SMOCK AUCTION CO., INC. • Kissimmee, FL www.dsa-auctions.com Sat., June 27, 2020 765-778-9277 For: Central Florida Public Auction • Fort Wayne, IN Tues., June 30, 2020 • Columbus, OH For: Summer INDOT Absolute Thurs., July 9, 2020 Auction 4 For: Northeast Heavy Equipment & Truck Auction • Winamac, IN Tues., July 7, 2020 • Stanton, TX For: Summer INDOT Absolute Wed., July 15, 2020 Auction 5 For: Permian Basin Unreserved Public Auction • Natchez, MS HENDERSON AUCTIONS Fri., July 17, 2020 www.hendersonauctions.com For: Absolute Retirement 225-686-2252 Auction • Livingston, LA June 25 - 27, 2020 For: 3-Day Independence JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com Auction 864-940-4800 • ONLINE ONLY HESS AUCTIONEERS Thurs., June 25, 2020 www.hessauctioneers.net For: North Texas Fleet 866-511-2493 Reduction Auction • Marietta, PA Fri., August 14, 2020 McGREW EQUIPMENT For: Trucks, Trailers & COMPANY Equipment www.mcgrewequipment.com 888-311-2811 I.R.A.Y. AUCTION • ONLINE ONLY www.iraymn.com Tues., June 30, 2020 320-968-7230 For: Farm & Construction • ONLINE ONLY Equipment Auction Wed., July 29, 2020 • ONLINE ONLY For: Heavy Equipment, Truck Tues., July 7, 2020 & Trailer Auction For: Farm & Construction Equipment Auction J.J. KANE AUCTIONEERS • ONLINE ONLY www.jjkane.com Tues., July 14, 2020 856-764-7163 For: Farm & Construction Equipment Auction • TIMED ONLINE ONLY Wed., June 24, 2020 For: Construction, Utility MEEKINS AUCTION COMPANY Equipment and more www.meekinsauction.com

• ONLINE ONLY June 24, 2020

• TIMED ONLINE ONLY Tues., June 30, 2020 For: Construction, Utility Equipment and more

• ONLINE ONLY

• TIMED ONLINE ONLY

910-739-0547 • Lumberton, NC Tues., June 30, 2020 For: Construction & Truck Auction

MIDEAST EQUIPMENT SUPPLY www.mideastequip.com 860-370-9993 • VIRTUAL ONLINE Tues., June 30, 2020 For: Major Construction Equipment Auction

• Fort Meyers, FL August 7 - 8, 2020 For: Heavy Equipment, Industrial Machinery, Trucks & Trailers, Commercial Vehicles & more SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Glastonbury, CT Fri., June 26, 2020 For: One Owner Retirement Sale – Complete Dispersal

MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

• ONLINE ONLY June 23 - 25, 2020 For: Tri Point LLC Oil & Gas Process Equipment Auction

• ONLINE ONLY June 19 - 24, 2020 For: Timed Online Upper Midwest Locations

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Wed., June 24, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., June 25, 2020 For: Construction Equipment Auction • ONLINE ONLY Wed., July 1, 2020 For: Ag Equipment Auction • ONLINE ONLY Thurs., July 2, 2020 For: Truck & Trailer Auction • ONLINE ONLY Tues., July 7, 2020 For: Government Auction • ONLINE ONLY Wed., July 8, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., July 9, 2020 For: Construction Equipment Auction ROSEN & COMPANY, INC. www.bidrosen.com 216-990-1831 • Cleveland, OH Fri., July 17, 2020 For: Summer Quarterly Heavy Equipment & More ROYAL AUCTION GROUP, INC. www.royalauctiongroup.com 239-936-4121

• ONLINE ONLY July 3 - 8, 2020 For: Timed Online Upper Midwest Locations • ONLINE ONLY July 17 - 22, 2020 For: Timed Online Upper Midwest Locations • West Fargo, ND Wed., July 29, 2020 For: AgIron West Fargo Event • ONLINE ONLY July 30 – Aug. 6, 2020 For: Construction Consignment Auction • ONLINE ONLY August 7 - 17, 2020 For: Kibble Equipment Auction VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Live Virtual Auction Sat., July 25, 2020 For: July 2020 Auction WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Perris, CA Fri., August 7, 2020 For: Public Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Only Fri, July 11, 2020 For: Public Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 97

30

P

T

Important Auctions

315.633.2944 • www.lyonauction.com • www.lyonauctionlive.com

AUCTION CALENDAR

follow

us on

@Lyo nAuc tion!

Go to WWW.LYONAUCTION.COM for START-STOP times on TIMED / VIRTUAL AUCTIONS 1.

ccc{ O]PG <G ;G >{ <RO www.AuctionsInternational.com

1.800.536.1401 YOUR ONLINE LIQUIDATION MARKETPLACE

Heavy Equipment Trucks Road Maintenance Utility Equipment Trailers Much More...

BIG or SMALL we sell it ALL! Virtual equipment showroom. Hassle free process. Accredited auctioneers. Hundreds of assets. Check us out today!

@auctionsinternationalinc

www.AuctionsInternational.com

LIVE: Wednesday, June 24: SAN ANGELO, TEXAS: Very Late Model 13. LIVE: Friday, July 31: BARNESVILLE, OHIO: Complete Liquidation. 1 Owner. Late Model Construction Equipment, Aerial Lifts, Dump Trucks, Truck Rental Fleet Construction Equipment. Hydraulic Excavators, Tractor Loader Tractors, Dump Trailers, Walking Floor Trailers, Attachments, Support. Backhoes, Skid Steers, Aerial Lifts, Forklifts, 20+ Telescopics Primarily Cat, Komatsu & John Deere, Utility Equipment, Trucks & Trailers. 14. LIVE: Saturday, August 1: ATTLEBORO, MASSACHUSETTS: Over 100 Bucket, Service, Pickup and Van Trucks, Heavy & Light Construction 2. LIVE: Thursday, June 25: TORONTO, CANADA: Unbelievable John Equipment, Attachments, Support and more. Deere Compact Tractors, Agricultural Tractors & Implements, John Deere Snow & Construction Equipment, Quantity Snow Attachments, Quantity Support Mostly in 15. LIVE: Friday, August 7: NEW CASTLE, PENNSYLVANIA: 2 Job Like-New Condition. Completions. Primarily Larger Construction Equipment, Attachments, Later Model Truck Tractors, Mack Dump Trucks, Trailers. 3. LIVE: DAY 1 OF 2-DAY AUCTION: Friday, June 26: ROARING SPRING, PA: Major Job Completion. One of the Finest Aggregate, Paving & 16. LIVE: Saturday, August 8: BUFFALO, NEW YORK: Cat, Komatsu Construction Companies in the Northeast. Selling Will Be Primarily Construction, Construction Equipment, Aggregate, Trucks, Trailers, Support Equipment. Asphalt and Paving Equipment That Has Been Maintained The Very Best. HIGH- 17. LIVE: Sunday, August 9: ROME, NEW YORK: Estate Auction. LIGHTS: (2)Straight Frame Haul Trucks: (2)Euclid, 3 Hydraulic Excavators: Complete Liquidation. Over 1,000 Lots of Primarily Cast Iron Toys, Signs, Show (2)Komatsu, MDI Yutani, (6)Rubber Tired Loaders: (4)Cat 988B, Kawasaki, Cases and Much More. Crawler Tractor: Cat D8L, 2 Motor Graders: (2)Puckett Bros. 510D, 6 Tractor 18. LIVE: Saturday, August 15: WEST MILFORD (NEWARK), NEW Loader Backhoes, Asphalt Rollers, 4 Asphalt Pavers: (2)2014 Volvo P7170. JERSEY: Winter Job Completion. Large Snow Equipment Auction. Very Late 4. ONLINE AUCTION: Friday, June 26: QUERETARO, MEXICO: Late Model Low-Houred Rubber Tired Loaders, Skid Steers, Utility Tractors, Model Cat, Case, John Deere, Volvo Construction Equipment, Aerial Lifts, Forklifts, Trucks, All types of Snow Plows, Snow Blades, Snow Accessories, Forklifts, Trucks and Trailers, Large Quantity Attachments & Support Equipment. Shop Equipment. 5. LIVE: DAY 2 OF 2-DAY AUCTION:: Saturday, June 27: LEESPORT, 19. LIVE: Saturday, August 29: MANCHESTER, NEW HAMPSHIRE: PA: Major Job Completion. One of the Finest Aggregate, Paving & Construction One-of-A-Kind 50-Year Old Collection of Some of the Finest Mack Collectibles Companies in the Northeast. Selling Will Be Primarily Construction, Asphalt and on Planet Earth Along with Hundreds of Original Signs and Toys that Cannot be Paving Equipment That Has Been Maintained The Very Best. HIGHLIGHTS: Found or Topped for Quality. (11)Straight Frame Haul Trucks: (2)Cat 777C, Cat 769B, (7)Euclid, Terex 3307, NEW DATES TO BE ANNOUNCED (4)Rubber Tired Loaders: Cat 992D, (3)Cat 988B, (2)Motor Graders: Gehl TORRINGTON (HARTFORD), CONNECTICUT: Major Job MG747B, Champion C50A, Backhoe: Case 580 Super-L(4x4), (2)Milling 20. Completion Aggregate & Construction Equipment, Truck Tractors, Dump Machines, Asphalt Paver, Material Transfer Vehicle (2)Skid Steers, (5)Asphalt Trucks, Service & Utility Trucks, Pickups, Various Trailers, Attachments, Support Rollers. & More. 6. LIVE: Wednesday, July 8: REGINA, SASKATCHEWAN, CANADA: AUBURN, NEW YORK: Complete Liquidation of Primarily Cat, John Very Large Job Completion Auction Featuring Late Model Cat, John Deere, 21. Deere, New Holland Construction Equipment-(3)Cat 621, (2)Cat D8H. Komatsu, Volvo, Earthmoving Equipment, Asphalt & Paving Equipment, Aerial Lifts, Forklifts, Attachments, Large Quantity of Late Model Various Types of 22. ERIE, PENNSYLVANIA: Acquisition Auction. Late Model Cat, Trucks & Trailers, 85 Late Model Pickup & Service Trucks. Komatsu, John Deere, Construction & Utility Equipment, Dump Trucks, Truck Tractors, Trailers, Attachments & Support. 7. LIVE: Thursday, July 9: SAN DIEGO, CALIFORNIA: The Latest & Greatest Rental Fleet Equipment Found Anywhere. Primarily Cat, Komatsu, 23. MONTREAL, CANADA: Late Model Rental Returns, Utility Equipment, Hitachi, Kubota, Dynapac and Bomag Equipment and Quantity of Late Model Aerials, Trucks, Trailers, Support Equipment. Booms & Scissors. 24. LINCOLN, MAINE: Two Major Job Completions. 1 Very Large Forestry Featuring All Types of Logging Equipment and Trucks, and 1 Large Construction 8. LIVE: Tuesday, July 15: NEW WATERFORD, OHIO: Part 1: 2-Day Equipment Spread of Later Model Cat, Komatsu, John Deere, New Holland Truck Tractor, Van & Dump Trailer & Rolloff Container Bankruptcy Auction, Earthmoving Equipment, Forklifts, Aerials, Generators, Air Compressors and Approx. (60±)Peterbilt & Kenworth Truck Tractors Between the Two Sales. more. Approx. (100±) Rolloff Boxes, Approx.(300±)Stoughton, Wabash, Great Dane, Trailmobile Trailers. 25. PORTLAND (Auburn), MAINE: Retirement Auction. Late Model Cat, Komatsu, Case, Volvo Construction Equipment, Plus Telehandlers, Generators, 9. LIVE: Thursday, July 17: CLEVELAND, OHIO & AKRON OHIO: Boom & Scissor Lifts, Trucks, Trailers and Support. Part 2: 2-Locations. Cleveland & Akron, OH. Bankruptcy Auction. Truck Tractor, Van & Dump Trailer & Rolloff Auction. 26. ATHENS (Knoxville), TENNESSEE: Four Prime Commercial Properties and Construction Equipment. 10. LIVE: Saturday, July 18: CLEVELAND, OHIO: Completed Trucking TRUXTON, NEW YORK: Estate Auction. Complete Liquidation. LowJob. Truck Tractors, Rolloff & Dump Trucks, All Types of Trailers: Dump, 27. houred Construction Equipment, Late Model Vehicles, Collectibles and Antiques, Equipment, Service, Pickup & Van Trucks. Large Acreage of Real Estate. 11. LIVE: Friday, July 24: CANASTOTA (Syracuse), NEW YORK: Major DTBA: MANCHESTER, NEW HAMPSHIRE: Rental Acquisition Job Completion. 1 Owner of Very Late Model Construction Equipment, Dump 28. Auction of Late Model Rental Fleet Utility Equipment, Support, Attachments. Trucks, Truck Tractors, Pickup and Service Trucks, All Types of Trailers, Accessories and Shop Equipment. 29. DTBA: RACINE, WISCONSIN: Late Model Construction Equipment, Aerial Lifts, Forklifts, Trucks, Trailers, Support & Attachments. 12. LIVE: Saturday, July 25: CANASTOTA (Syracuse), NEW YORK: In Conjunction with The Famous Alex Lyon & Son Haycamp & Barbecue. The 30. DTBA: FAYETTEVILLE, ARKANSAS: Late Model Construction, Fanciest Late Model Cat, Komatsu Construction Equipment, Aerial Lifts, Utility, Compact Equipment, Agricultural Tractors & Farm Implements, Large Telescopics, Attachments, Support, Truck Tractors, Dump Trucks, All Types of Quantity Landscape Equipment 0° Radius Movement, Utility Vehicles, 4Trailers. The Fanciest & Best Equipment Ever Assembled for Public Auction. Wheelers and more.

www.lyonauction.com

Page 98 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SC&RA Names Koberg to Safety Study: Employers, Employees Education & Training Committee Would Benefit From GROW Act Kris Koberg, CEO of DICA, was recently named to serve a three-year term on the Specialized Carriers & Rigging Association’s (SC&RA) Crane & Rigging Group Safety Education & Training Committee. Koberg’s nomination was approved on April 30 during the association’s webbased committee meeting. The mission of this committee is to monitor events and recommend actions on safety related issues, including safety programming, legislative, regulatory and standard settings; and, active liaison with the Ironworkers Labor/Management Safety Advisory Committee. Koberg joined his family’s business in 2011. Respected as Kris Koberg an industry thought-leader, Koberg brings nine years of industry experi- and family. I’m looking forward to serving on the committee and working to fulfill the ence to the committee. “It’s an honor to serve the crane and rig- mission of improving the safety in our indusging industry and represent our company try,” said Koberg. 

COMPOSITE from page 18

“SMACNA contractors’ commitment to a secure retirement for its workforce extends to every generation of workers — not just those already in the industry, but also to new entrants who will sustain and grow this industry in the years to come,” said Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA) CEO, Vince Sandusky. “Without abandoning the retirement promises already made to participants, composite plan design would put an energizing new retirement option on the table for the future, one that doesn’t need taxpayer bailouts.” “The men and women who build and maintain our nation’s vital industrial infrastructure deserve our thanks, and more importantly, they deserve a strong and stable retirement and pension system,” said Stephen Lindauer, the CEO of The Association of Union Constructors. “Composite plans will provide plan trustees with a sustainable option to consider as they work to ensure that retirees are protected not just now, but for decades to come. That’s why TAUC, along with many of our build-

ing trades union partners, supports the Congressional authorization of composite plans.” “Composite plans will eliminate the greatest obstacle to our industry’s growth, the disproportionate burden of withdrawal liability,” said David Long, CEO National Electrical Contractors Association. “We can remove this obligation while strengthening the long-term security of the benefits our retirees and electricians earn.” “The GROW Act and its composite plan design offer critical, strong protections that ensure pension promises made are kept while establishing a path forward for employers and plan participants alike,” said Scott Casabona, President, Signatory Wall and Ceiling Contractors Alliance, referring to a legislative proposal that would authorize the new composite plans. “Among these protections are safeguards that preclude employers from abandoning legacy plans, prioritize legacy plan funding over composite plan contributions, and ensure that trustees of the plan — labor and management alike — continue to fulfill their fiduciary obligations to legacy plan participants.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 99

Page 100 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Genie: Protocols for Cleaning, Disinfecting Aerial Equipment Based on guidelines from the Centers for Disease Control and Prevention (CDC), Genie offers new procedures and protocols for cleaning and disinfecting aerial equipment on job sites to help prevent the spread of COVID-19 while working at height. This information provides jobsite superintendents and fleet managers with specific precautions to take in order to keep workers and job sites safe and productive. “The ongoing COVID-19 global pandemic has caused significant disruptions in the aerial access industry,” said Scott Owyen, Genie director of training, Terex AWP. “For many weeks, aerial job sites shut down to mitigate the risk of people contracting the virus, as well as to slow the spread from those who already had it. Now, as job sites are beginning to reopen worldwide, jobsite superintendents and fleet managers need to think about how to best protect workers and prevent the spread of the virus. "Following the CDC’s guidance, we can offer recommendations to our customers on the most effective way for aerial equipment operators to clean and disinfect machines before, during and after each use.” According to Owyen, the first, and number one, goal of all aerial job sites should be to provide a safe and productive work environment for workers and equipment. To do this, Owyen said that aerial equipment operators need to take the following actions when cleaning and disinfecting machines: Cleaning Machines 1) Wear reusable or disposable gloves for routine cleaning and disinfection. 2) Clean surfaces using soap and water, then use disinfectant. 3) Cleaning with soap and water reduces number of germs, dirt and impurities on the surface. Disinfecting kills germs on surfaces. 4) Practice routine cleaning of frequently touched surfaces. Disinfecting Machines Genie recommends the use of EPA-registered household disinfectants. Some common EPA-registered disinfectants include: • Fantastik All-Purpose Cleaner • Scrubbing Bubbles Disinfectant Restroom Cleaner II • Lysol Bathroom Cleaner • Lysol Brand Bleach Mold and Mildew

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com.

Remover Follow the instructions on the label to ensure safe and effective use of the product. Read the EPA’s infographic on how to use these disinfectant products safely and effectively. Many products recommend: • Keeping surface wet for a period of time (see product label) • Precautions such as wearing gloves and making sure you have good ventilation during use of the product Diluted household bleach solutions may also be used if appropriate for the surface. • Check the label to see if your bleach is intended for disinfection, and ensure the product is not past its expiration date. • Unexpired household bleach will be effective against coronaviruses when properly diluted. • Follow manufacturer’s instructions for application and proper ventilation. Never mix household bleach with ammonia or any other cleanser. • Leave solution on the surface for at least 1 minute. • To make a bleach solution, mix: 5 tablespoons (1/3rd cup) bleach per gallon of water OR 4 teaspoons bleach per quart of water Bleach solutions will be effective for disinfection up to 24 hours. Please keep in mind that bleach may negatively affect warning labels and other safety markings. Alcohol solutions with at least 70 percent alcohol may also be used. “The best way to prevent the spread of COVID-19 is to avoid being exposed to it,” said Owyen. “These recommendations will help protect our equipment operators from contact with the virus while working at height, as well as assisting our customers, jobsite superintendents and fleet managers in their efforts to promote safety in the aerial access industry.” For more information, visit www.genielift.com. 

JUNE/JULY 2020 CRANE SAFETY COURSES NEW LOCATIONS! REGISTER TODAY! June 23 – June 26, 2020 Overhead Crane Train The Trainer, Orlando, FL June 23 – June 26, 2020 Overhead Crane Train The Trainer, Cincinnati, OH June 30 – July 1, 2020 Forklift Operator & Inspector Training, Orlando, FL June 30 – July 2, 2020 Aerial Work Platform Train The Trainer, Houston, TX July 7 – July 10, 2020 Mobile Crane Inspector Training, Orlando, FL July 8 – July 10, 2020 Tower Crane Operator & Inspector Training, Houston, TX July 13 – July 14, 2020 Overhead Crane Operator Training, Cincinnati, OH July 13 – July 17, 2020 Mobile Crane Operator Training, Orlando, FL July 14 – July 16, 2020 Rigging Inspector Training, Houston, TX July 20 – July 24, 2020 Overhead Hoist Maintenance Training, Houston, TX July 20 – July 24, 2020 Mobile Crane Train The Trainer, Los Angeles, CA July 21 – July 22, 2020 Qualified Signal Person Training, Orlando, FL July 23 – July 24, 2020 Critical Lift Planning & Lift Director Training, Orlando, FL July 27 – July 31, 2020 INSPECTOR CERTIFICATION COMBOS, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com ASSOCIATED GENERAL CONTRACTORS (AGC) AGC’s Three Part Webinar Series: Business Development, Marketing & Proposal Basics for the General Contractor Dates: July 28, 2020 - 2:00pm to 3:00pm Price: Member : $149 Non-Member: $199 Description: The AGC Business Development WebEd Series, brought to the AGC membership by the AGC BD Forum, will be held in May, June and July of this year and will be sure to improve your business by focusing on the basics of Business Development, Marketing and Proposals for the General Contractor. We are confident that by the end of this WebEd Series, you will be more prepared to grow your talent within your company, expand your client map and continuously improve your processes and strategies.. Part One: Basics of Business Development for the Busy General Contractor – May 12, 2020-COMPLETED Part Two: Basics of Marketing for the Busy General Contractor – June 23, 2020-COMPLETED Part Three: Basics of Proposals and Presentations for the Busy General Contractor – July 28, 2020 Most proposals and presentations have 3 things in common; a lot of talk about how great we are; a lot of boiler plate language that says the same thing as our competitors; and Boring, boring, & more boring. All 3 are losing behaviors! In this webinar, we will discuss the following: • Gathering the intel needed to craft a tailored message • Creating a compelling offering around the client’s key issues • Flipping the focus from “Us” to “Them”. • Focusing on the “Benefits” we offer, as opposed to the “Features” • Mastering the use of the Executive Summary • And much more! For more information on the above event, contact AGC of America, 2300 Wilson Blvd. Suite 300, Arlington, VA 22201. Phone: (703) 548-3118. www.agc.org. For computer specifications, please visit https://www.gotomeeting.com/meeting/online-meeting-support or contact webinars@agc.org. NATIONAL ASPHALT PAVEMENT ASSOCIATION (NAPA) NAPA Midyear Virtual Meeting Managing Disruption: The COVID-19 Era...and Beyond Dates: July 13 – July 15, 2020 In order to protect the health and safety of our members while continuing to provide valuable education and engagement opportunities, NAPA leadership decided to bring the in-person Midyear Meeting to a virtual platform. The theme of NAPA’s Midyear Virtual Meeting is managing disruption in the COVID-19 era and beyond. Attendees will walk away with a better understanding of how to position themselves to navigate the changing economic, legislative, and workforce landscapes. Attendees will learn from experts on the latest trends and best practices as it relates to the pandemic and how our industry may change as a result. For more information on the Midyear Virtual Meeting or to register, visit napamidyear2020.elevate.commpartners.com.

AGC’s Construction Safety, Health & Environmental Conference is the industry’s foremost annual conference to hone in on the most critical safety, health and environmental compliance and risk issues impacting the business of construction. We have also greatly reduced the registration fees for this conference to reflect the virtual delivery format. The cost of registration for this event is: Member Price: $350 • Non-Member Price: $450 Over the course of three days, we will bring you informative presentations, panel discussions and interactive breakouts from remote locations via our virtual conference stage. Attendees can also participate in Q&A with speakers and learn about the exhibitors. And, if you are unable to join us for a specific online session, your registration gives you access to recordings of the education sessions and the opportunity to earn continuing education credits. To register or for more information on the above event, contact AGC of America, 2300 Wilson Blvd. Suite 300, Arlington, VA 22201. Phone: (703) 548-3118. www.agc.org.\ MINNESOTA ASPHALT PAVEMENT ASSOCIATION (MAPA) 7th Annual MAPA Golf Outing When: Monday, August 10, 2020 Time: 10:30 am - 7:00 pm Where: Bunker Hills Golf Club 12800 Bunker Prairie Rd NW Coon Rapids, Minnesota 55448 Save the date! We are ready FORE summer and a great golf event! Mark your calendar for August 10 and get your foursome together as you won’t want to miss this year. We’re back at Bunker Hills! This will be a great networking opportunity for all participants. We are hoping for another great turnout and beautiful August weather. Proceeds will go to the MAPA Scholarship Fund and Academic Institution Donation Fund. The ticket cost for this event is $150 (Before June 24) and $190 (June 24 and After). Ticket includes lunch, green fee, ½ cart, beer/soda on the course, dinner and prizes. Limited to the first 144 players. Visit www.asphaltisbest.com/events to register online or download the registration form. If you need to switch out a member of your foursome after registering, please contact MAPA Event Coordinator, Grace Gothers at graceg@ewald.com. For more information on the above event, contact MAPA, 1000 Westgate Drive, Suite 252, St. Paul, MN 55114. Phone: 651/636-4666. Email: info@mnapa.org. ASSOCIATED BUILDERS AND CONTRACTORS (ABC) ABC Convention 2020 Dates: August 17 – 19, 2020 Place: Music City Center 201 Fifth Avenue South, Nashville, TN 37203 ABC members are building Music City, and its the perfect backdrop for ABC Convention 2020. Nashville, a top convention destination known for its honky-tonks, food and arts scene, is also a great place to get inspired by keynote speakers, network with ABC peers and celebrate the accomplishments of merit shop contractors from across the country. Registration for ABC Convention 2020 is open to ABC members, chapter staff and guests sponsored by a member or chapter. If you are a nonmember interested in attending, please email meetings@abc.org for more information. ABC Convention is a closed event. All attendees must be registered and display an event badge to access to any of the ABC Convention events. Advanced registration will close on Monday, August 10. ABC is offering an attractive registration fee that incentivizes attendees to take part in all elements of the August convention. The fee has been reduced to $475. No a-la-carte registration options are available, with the exception of the Excellence in Construction® Awards gala* and the National Craft Championships day pass. If you plan to attend the August Convention and have not yet reached out to us, please email meetings@abc.org to confirm your registration. For more information and to register for this event, please visit http://abcconvention.abc.org..or contact Associated Builders and Contractors, 440 1st St., N.W., Ste., 200, Washington, D.C. 20001. Phone: 202/595-1505 Email: gotquestions@abc.org. NATIONAL ASSOCIATION OF WOMEN IN CONSTRUCTION Groundbreaking Women in Construction Conference Dates: August 24 – 25, 2020 Place: Hilton San Francisco Union Square San Francisco, California Groundbreaking Women in Construction Conference is much more than just a conference. It is a catalyst for change to inspire women at all levels to develop their leadership skills, expand their influence and boost industry growth potential. GWIC enables attendees to share, learn, challenge and inspire each other to contribute to their workplace and employer and realize career success. GWIC is for women and men in all construction sectors – architecture, engineering, consulting, contracting, supplier-vendors and related businesses, and in all career fields and levels, to expand their understanding of workplace interactions, key industry issues, and better talent management. For more information on GWIC Conference, contact the National Association of Women in Construction, 327 S. Adams Street, Fort Worth, TX 76104. Phone: 817/877-5551

HISTORICAL CONSTRUCTION EQUIPMENT ASSOCIATION (HCEA) 35th Annual International Convention and Old Equipment Exposition (POSTPONED UNTIL 2021) Dates: August 27 – 29, 2021 Instead of being held this August, it has been rescheduled for August ASSOCIATED GENERAL CONTRACTORS (AGC) 2021, at the same location near Concordia, Kansas, with the same AGC Construction Safety, Health & Environmental VIRTUAL outstanding attractions. Thank you for your patience and understanding. Be well, and see Conference you at the 2021 Convention! Dates: July 14 – July 16, 2020

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 101

Page 102 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ACE EQUIPMENT SALES INC ........................................................................72 ALEX LYON & SON INC PLAN AHEAD CALENDAR ......................................................................97 SYRACUSE NY 7/24 ................................................................................99 ALEX PARIS CONTRACTING CO INC ............................................................23 ALL ISLAND EQUIPMENT CORP ......................................................................7 ALLIED CONSTRUCTION PRODUCTS ..........................................................82 AMERICAN SHORING ......................................................................................20 AMULET........................................................................................................80,86 ASLAN GPS ......................................................................................................28 AUCTIONS INTERNATIONAL INC ..................................................................97 BANDIT INDUSTRIES INC ..........................................................................56,57 BARGAINS ........................................................................................................94 BEST LINE EQUIPMENT ..................................................................................14 CEG SCALE MODELS ......................................................................................35 CEG WANTED ..................................................................................................95 CHERRY VALLEY TRACTOR SALES ..............................................................10 CHESAPEAKE SPECIALTY EQUIPMENT ......................................................16 COMMONWEALTH EQUIPMENT ....................................................................60 CONSTRUCTION EQUIPMENT GUIDE ..............................................54,78,101 DANELLA USED TRUCKS & EQUIPMENT......................................................28 DEACON EQUIPMENT CO INC ......................................................................28 DEMAG CRANES..............................................................................................48 DOOSAN PORTABLE POWER ........................................................................43 DURATECH ......................................................................................................60 EAGER BEAVER TRAILERS ............................................................................91 EAGLE POWER & EQUIPMENT CORP ........................................................103 EESSCO ............................................................................................................61 ELLIOTT & FRANTZ INC ..................................................................................26 ELLIOTT & FRANTZ INC ..................................................................................74 EQUIP-SALE AND LEASING CORP ................................................................70 EQUIPMENT CORP OF AMERICA ..................................................................24 EQUIPMENT MART OF NEW YORK ..............................................................25 ESCO CORP ....................................................................................................85 ESSCO TRUCK & EQUIPMENT ......................................................................31 FELLING TRAILERS ....................................................................................92,93 FIVE STAR EQUIPMENT INC ..........................................................................21 FOLEY INC ..........................................................................................................2 G T MID ATLANTIC LLC....................................................................................10 GEHL ................................................................................................................47 GROFF TRACTOR & EQUIPMENT INC ..........................................................20 H O PENN MACHINERY CO INC ....................................................................15 HITACHI CONSTRUCTION MACHINERY ..................................................40,41 JESCO ................................................................................................................3 JOHN DEERE....................................................................................................39

KLEEMANN ..................................................................................................66,67 KOBELCO CONSTRUCTION MACHINERY ..............................................36,37 KOMATSU AMERICA CORP ............................................................................45 KOMATSU NORTHEAST ....................................................................................9 KPI-JCI ..............................................................................................................64 KUBOTA EXCAVATOR ......................................................................................49 LABOUNTY MANUFACTURING INC................................................................81 MAGELLAN CONSTRUCTION ........................................................................29 MANITOWOC CRANE GROUP ........................................................................44 MESSICK’S........................................................................................................28 METSO MINERAL CRUSHING....................................................................76,77 METSO MINERALS SCREENING ..............................................................58,59 MIDEAST EQUIPMENT SUPPLY LLC ONLINE AUCTION 06/30 ..........................................................................98 MONROE TRACTOR & IMPLEMENT CO INC ................................................69 MUNICIBID.COM ..............................................................................................97 NATIONAL ATTACHMENTS ..............................................................................83 NEW MILLENNIUM RENTALS..........................................................................32 NEWARK EQUIPMENT SALES CORP ............................................................10 NORAM..............................................................................................................51 NORRIS SALES CO INC ....................................................................................6 PETERSON PACIFIC CORP ............................................................................58 PLASTERER EQUIPMENT CO INC ..................................................................5 POWERSCREEN MID-ATLANTIC ....................................................................71 POWERSCREEN NEW ENGLAND ..................................................................63 R J POIRIER HEAVY EQUIPMENT REP ........................................................16 RANSOME ATTACHMENTS ............................................................................80 RITCHIE BROS. AUCTIONEERS UNRESERVED PUBLIC AUCTIONS ......................................................104 ROBERT H FINKE & SONS INC ................................................................19,69 SCHAEFER ENTERPRISES ............................................................................80 SENNEBOGEN..................................................................................................75 SMITHCO ..........................................................................................................90 STEPHENSON EQUIPMENT INC ....................................................................11 TEREX FUCHS..................................................................................................65 THOMPSON MACHINERY USED PARTS ......................................................83 TOWMASTER INC. ......................................................................................88,89 TRACEY ROAD EQUIPMENT INC ..................................................................13 TRANSPORT EQUIPMENT SALES..................................................................27 VOLVO CONSTRUCTION EQUIPMENT-NA ..............................................52,53 WESTCHESTER TRACTOR INC......................................................................14 WHITNEY & SON INC ......................................................................................73 WOODS CRW CORP........................................................................................17 YOUR NORTHEAST SITECH DEALERS ........................................................33

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 24, 2020 • Page 103

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Introducing the New Case CX D Series Excavator

RECENT TRADES

2013 Case TV380 Compact Track Loader, Stk# 34712, 1335 Hrs...........................................................................................$32,800

2003 Case 580SM Loader Backhoe, Stk# 41928, 8144 Hrs ...... ................................................................................................$24,000

2014 Takeuchi TW80C Compact Wheel Loader, Stk# 35783, 970 Hrs....................................................................................$64,900

2014 Kubota SVL90-2 Compact Track Loader, Stk# 40806, 3525 Hrs..................................................................................$37,800

2006 John Deere 1050C Crawler, Stk# 07982, 6462 Hours ....... ................................................................................................$70,000

2001 Case 85XT Skid Steer, Stk# 40010, 3410 Hrs .....$18,000

Authorized Dealer for These Quality Lines: Toro Dingos, Trenchers, Horizontal Directional Drills • Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Ring-O-Matic Vacuum Excavation • Airman Portable Air Compressors • Paladin Attachments Planers, Brooms, Buckets • Trailking Trailers

Frank Beck

Pat DiCicco

Dean J. Leonetti

Jim Lutz

Tom Scott

Rich Verna

Dean R. Leonetti

Brandon Jewell

Key Account Manager Montgomery County, PA

Key Account Manager, Philadelphia County, PA & Eastern Bucks County, PA

Philadelphia County, PA and Eastern Bucks County, PA

Montgomery County, PA and Western Bucks County, PA

New Castle County, DE, Cecil County, MD and Southern Chester County, PA

Chester County, PA and Delaware County, PA

Sales Manager

Toro Dingo Specialist

215/699-5871

610/312-3995

215/870-4546

215/680-9203

215/783-1847

215/870-8567

302/530-9134

610/420-4770

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 NEW HOURS Mon.-Fri. 7AM-5:30PM

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 NEW HOURS Mon.-Fri. 7AM-5PM

1416 Phoenixville Pike, Suite 200 West Chester, PA 19380 610/458-7054 Fax 610/458-7094 NEW HOURS Mon.-Fri. 7:30AM-4PM

Page 104 • June 24, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unrre eserrvved public equipment auctions

CR AN ES

33 0+

Equipmeent financing by equipment eexxperts.

2012 Ter Terex R RT6 T670-1 70 TTon on 4x4x4 | Atl Atlanta

2014 Morbark 23NCL | Atlanta

2019 Caterpillar 330 LC | Los Ang gele eles

Caterpillar 140H | Los Angeles

Caterpillar D6R LGP Series II | Salt Lake City

2014 Komatsu PC360LC-10 | Chehalis

2015 Komatsu D61P PXI-23 | Chehalis

Grove RT130 130 Ton Ton 4x4x4 4 | Salt Lake City

3

3 – 2012 Caterpillar 735B 6x6 | Atlanta

68,435+ items in 100+ auctionss including Los Angeles, CA Gonzales, LA Saltt Lak Lake City, UT Atlanta, GA Chehalis, WA WA

Jun 26 Jun 26 Jun 30 Jun 30 Jun 30

For ort Worrth, th, TX Denver, CO Tipton, CA Phoenix, AZ

Jul 28–29 Aug 5 Aug 12 Aug 28

IMPORTTA ANT MESSA AGE GE: Due to COVID-19, all off ourr auctions are now online bidding only. Forr the most up-to-date infform ormation visit rbauction.com/covid-19

Online bidding infform ormation

Financing & leassing available

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in anyy off ou our auctions, create your accountt no now!

Up to 100% financcing, with no money dow wn.

More items adde ed daily Call about selling: 1.800.211.3983

See fu full auction & equipment listing gss at rbauction.com

Auction Company Bond #0470724, Auctioneer Trevor J. Moravec Bond # 0466225, Used Motor Vehicle Dealer License #2647, Auction Company License # 1981, Motor Vehic Vehicle Dealer License #1539, Auction Company License # 001348, Auctioneer Frederick R. Vilsmeier V # AUNR003087, Auction Company Bond #0470724, Auctioneer Patrick J. Hicks B Bond # 0470727