Issuu

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Midwest Edition

www.constructionequipmentguide.com

December 3, 2016 • Vol. XX • No. 25 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

KDOT Celebrates Opening Highway

Sterett Navigates Challenging Lift… 10

Construct a Perfect Holiday…14

The $92 million widening and rehabilitation project of 15 mi. (24 km) of Interstate 69, part of the Indiana Department of Transportation (INDOT) Major Moves 2020 program, will be completed in November 2017.

Milestone Contractors Widen I-69 Northeast of Indianapolis By Irwin Rapoport CEG CORRESPONDENT Largest Solar Facility in Midwest to Come Online…18

Table of Contents ................4 Attachment & Parts Section ......................................43-47

The $92 million widening and rehabilitation project of 15 mi. (24 km) of Interstate 69, part of the Indiana Department of

Transportation (INDOT) Major Moves 2020 program, will be completed in November 2017. Crews from Milestone Contractors L.P. are making steady progress on the highway northeast of Indianapolis in see INDOT page 42

LAWRENCE, Kan. (AP) Kansas transportation officials will host two public events to celebrate the completion of a long-waited highway project nearly three years after the start of construction. The Kansas Department of Transportation is scheduled to host a ribbon cutting and public walkbike event Nov. 11 for the opening of the east leg of the Kansas 10 South Lawrence Trafficway, according to the Kansas City Star. The walk-bike event will go through a half-mile section of scenic wetlands, which are adjacent to the highway. The 6-mi. (9.6 km) stretch of four-lane highway will complete a loop around the city of Lawrence and links Kansas 10 on the east side of Lawrence to a part of the highway that opened on the west side in 1998. KDOT officials said the road will open before Thanksgiving to the public. The project, which was nearly 20 years in the making, is expected to give drivers a shortcut from southern parts of the area to Interstate 70. The bypass will help ease congestion on Lawrence’s clogged streets as well. In case of inclement weather, the ribbon-cutting event will move to the KDOT Lawrence Sub-area Office. Officials said in the same circumstance, the walk-bike event would be canceled. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CEG Launches New Online Used Equipment Service

Truck & Trailer Section ........ In a world fueled by smart phones, tablets, “Make Offer” options currently are available for “Buy Now” and “Make Offer” technologies. ......................................49-57 laptops and desktop computers, it’s never been a select, but rapidly growing, number of equip- With “Buy Now” the seller sets a specific price easier to buy virtually anything online … all by

Snow & Ice Section ......73-79 just the simple click of a button.

Now, due to a new online purchasing plat-

Recycling Section ......87-102 form offered by Construction Equipment Guide (CEG), you can buy and sell used construction

Business Calendar ..........105 equipment the same way — safely and conveniently — from equipment dealers you already

ment dealers on ConstructionEquipmentGuide.com. CEG has partnered with Proxibid, the world’s most trusted online Marketplace, to power all transactions, enabling anyone anywhere in the world with an internet connection to purchase equipment at ConstructionEquipmentGuide.com.

Auction Section ......107-115 know and trust. CEG now offers sellers the ability to turn

Advertisers Index ............114 advertisements into interactive listings with transactional capabilities. “Buy Now” and

Buy Now … or Make Offer Equipment dealers participating in this new program can list equipment for sale leveraging

for an item, which is sold immediately. “Make Offer” allows a buyer and seller to negotiate the price of an item. All items available for sale include detailed images and complete descriptions including serial numbers. Sellers provide as much detail about their items for sale as possible, even inspection reports and vehicle history when available, to ensure buyers have as much information as possible to make an educated buying see MARKETPLACE page 110

Page 2 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2011 CAT 120M $158,000 S/N B9W00202 - 5356 hrs

2008 CAT 140M $145,000 S/N B9M00590 - 7189 hrs

2010 CAT 140M $165,000 S/N B9D02206 - 4730 hrs

2010 CAT 140M $165,000 S/N B9D02691 - 3813 hrs

2006 CAT 980H $200,000 S/N JMS01306 - 10,459 hrs

2015 CAT 972M $225,000 S/N A8P00532 - 6459 hrs

2008 CAT 980H $160,000 S/N JMS03236 - 13,343 hrs

2012 CAT 980K $320,000 S/N W7K00999 - 6,137 hrs

2011 CAT 305D $37,500 S/N XER00451 - 1556 hrs

2013 CAT 304 $27,000 S/N NAD00851 - 3202 hrs

2015 CAT 302.7D $50,000 S/N LJ700388 - 278 hrs

2004 CAT 318C $49,000 S/N MDY00328 - 9659 hrs

2015 CAT 289D $68,000 S/N TAW02550 - 406 hrs

2012 CAT 259B3 $41,000 S/N YYZ04184 - 1229 hrs

2013 CAT 279C $42,000 S/N KWB01275 - 1784 hrs

2014 CAT 289D $58,500 S/N TAW02067 - 786 hrs

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 3

2016 Laymor Sweepmaster .... $23,500

2012 Deere 850K XL LT T w/Winch.. $179,500

2006 Cat D6RIII LGP P w/Winch .... $118,500

‘15 Screen Machine ne 107T Scalperr..$128,500 ..$128,500

Canopy, Kubota D1105 Tier 4F 24.8HP, Tier 4 diesel, 8’ broom, 70 gallon sprinkler system, 205/75R14 tires, towable, 3,100 lbs., 6 hrs. .................................... .................... #LA AY001 Y001

AC, 205HP Tier 4 diesel, 12’ 3” 6 way blade, hydrostatic trans., 23 1/2” pads, Allied H6H 60,000 lb. winch, rear screen, 49,000 lbs., 1,221 hrs. ....................... #11043

A/C, Cat C9 200HP P diesel, 36” pads, diffff st steer teer, System 1 undercarraige, 3rd valve, Paccar PA56 rear winch, sweeps, rear screens, 41,000 lbs., 5,384 hrs. .... #10224

5” tapered grizzly spacing, 2-5’x7’ screens, adjustable screen angling, 10’,10” load height,, remote, 3-5 yard loader capacity, 45,000 lbs, 318 hrs. ........... #SM007

sales@iltruck.com • rental@iltruck.com • 815-941-1900 Illinois T Truck ruck & Equipment 320 Briscoe Drive, Morris Illinois 60450

www.iltruck.com www .iltruck.com

Page 4 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION

IN THIS ISSUE

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

10 14

FEATURES

10 STERETT NAVIGATES CHALLENGING WASTEWATER PLANT LIFTS Periodically, crane service companies run into one of those lift projects where everything is seemingly stacked against them.

14 CONSTRUCT A PERFECT HOLIDAY WITH

41 PIRTEK HONORS MANAGEMENT

RECYCLING SECTION

EXCELLENCE AT EVENT

CEG’S GIFT GUIDE It’s gift-giving time again, and CEG has compiled a list of ideas for every construction lover on your list, from the littlest tikes to those who have been around the site a few times. There are even a few selections for four-legged

87 TEREX-FINLAY LAUNCHES NEW MODELS AT CUSTOMER OPEN DAY

family members.

60 KENWORTH T680 DELIVERS 52ND U.S. 18 LARGEST SINGLE SOLAR FACILITY IN

96 MOBILE-FRIENDLY WEBSITE SITE OFFERS

CAPITOL CHRISTMAS TREE IN DECEMBER

MIDWEST TO COME ONLINE The largest single solar facility in the Midwest is gearing up to deliver clean energy to customers.

This fall, a specially-decaled Kenworth T680 transported the 52nd U.S. Capitol Christmas Tree on a special cross-country tour to the U.S. Capitol. The tour visited 26 community celebrations during the 2,800-mi. journey.

ALL NEW CONTENT

100 RTEX BREAKERS BOAST LESS AIR, FUEL CONSUMPTION

68 MANITOU AMERICAS WELCOMES THE LILLY 22 NEW WAY REFUSE TRUCKS AVAILABLE IN OHIO, INDIANA Southeastern Equipment Co. Inc. announced that New Way refuse trucks and attachments are now available at its environmental division locations in Ohio and Indiana.

COMPANY TO ITS DEALERSHIP NETWORK The Lilly Company has 12 locations: Memphis, Kingsport, Knoxville and Jackson, Tenn.; Richland and Belden, Miss.; and Mobile, Dothan, Montgomery, Irondale, Madison and Birmingham, Ala.

110 YANMAR ACQUIRES LAND FOR TRAINING, CUSTOMER EXPERIENCE

28 NORTRAX NAMES KLUG AS TERRITORY SALES MANAGER He will be responsible for heavy equipment and forestry new and used machine sales as well as providing customers with their product support needs.

112 JOHN CARRINGTON JOINS TEREX MPS

33 JCB EXPANDS NORTH AMERICAN DEALER NETWORK AgPro Equipment Services Inc., headquartered in Hettinger, N.D., joins JCB’s North American dealer network as AgPro JCB. Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Mobile

Facebook

Twitter

Terex MPS, one of the world leaders of material processing technology for modular, portable and static crushing and screening equipment, announced the appointment of John Carrington as aftermarket business development manager for North America

105 BUSINESS CALENDAR 105 CLASSIFIEDS 107 COMING AUCTIONS

EQUIPMENT 43 JOHN DEERE Grading-Heel Buckets 49 MACK GuardDog Connect 54 ELLIOTT EQUIPMENT COMPANY 36142 Boom Truck

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Yanmar America, a global manufacturer of advanced performance industrial and marine diesel engines and generators; compact construction, agricultural and utility task vehicle equipment and gas engine based energy systems, has invested $20 million and acquired 50-plus acres of land in Acworth, Ga., to build a new training and customer experience facility.

DEPARTMENTS

YouTube

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

National Sales Manager 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Toll Free Fax e-mail

773/769-4090 800/632-0233 773/769-4280 jmckeon@cegltd.com

Toll Free Fax e-mail

440/243-9690 800/810-7640 440/243-9691 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Toll Free Fax e-mail

952/353-1770 866/413-4265 952/353-2750 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 5

Quality Used Equipment...with support to back it up

Komatsu HD605-7EO, ’08, 20,247 hrs....$130,000

Hamm HD12VV, ’12, 4,531 hrs ................$15,000

DOZERS

EXCAVATORS

SKID STEERS

Komatsu D61PX-15EO, ‘08, 4,180 hrs ..............................$105,000 Komatsu D61PX-23, ‘13, 4,090 hrs ..................................$146,000 Komatsu D61PX-23, ’14, 1,838 hrs ..................................$179,000 Komatsu D61PX-23, ’14, 2,367 hrs ..................................$179,000 Komatsu D65EX-15, ’06, 2,301 hrs....................................$144,500 Komatsu D65EX-16, ’11, 2,234 hrs....................................$165,000 Komatsu D65PX-15EO, ’06, 11,070 hrs ..............................$59,000 Komatsu D65EX-15EO, ’07, 3,934 hrs ..............................$149,500 Komatsu D65WX-15EO, ’07, 3,959 hrs ..............................$157,000 Komatsu D275AX-5, ’03, 23,015 hrs ..................................$99,500

Atlas Copco MB1200 Hydraulic Hammer, ’05, Rebuilt & Painted ...... ..............................................................................................$21,799 Case CX135SR, ‘11, 2,350 hrs ............................................$88,000 Cat 330CL, ’02, 12,032 hrs ..................................................$59,500 Cat M318, ‘96, 6,440 hrs ....................................................$39,500 Cat 325CL, ’02, 6,761 hrs ....................................................$50,000 Deere 85G, ’15, 553 hrs ......................................................$99,000 Deere 160C LC, ’06, 7,173 hrs ............................................$55,000 Deere 200C LC, ’04, 8,988 hrs ............................................$60,000 Deere 240D LC, ‘10, 6,338 hrs ............................................$80,000 Deere 350DLC, ’07, 5,837 hrs ..........................................$109,500 Deere 350DLC, ’07, 6,832 hrs ..........................................$109,500 Kobelco SK485-9, ‘12, 3844 hrs ........................................$180,000 Komatsu PC138USLC-8, ’13, 2,432 hrs ............................$115,000 Komatsu PC138USLC-10, ’14, 2,794 hrs ..........................$115,000 Komatsu PC160LC-7, ’07, 4,483 hrs....................................$79,000 Komatsu PC160LC-7, ‘04, 8,215 hrs....................................$49,000 Komatsu PC200LC-8, ‘12, 4,414 hrs..................................$110,000 Komatsu PC210LC-10, ’13, 1,862 hrs................................$145,000 Komatsu PC210LC-10, ’14, 1,307 hrs................................$178,000 Komatsu PC220LC-6, ‘98, 19,095 hrs..................................$37,100 Komatsu PC220LC-7, ‘04, 12,969 hrs..................................$48,000 Komatsu PC220LC-7, ‘02, 9,906 hrs....................................$80,000 Komatsu PC220LC-8, ’06, 9,204 hrs....................................$83,000 Komatsu PC228USLC-8, ’12, 3,449 hrs ............................$155,000 Komatsu PC228USLC-10, ’14, 923 hrs ..............................$186,599 Komatsu PC300LC-7, ’02, 6,764 hrs....................................$90,000 Komatsu PC300LC-7, ’05, 9,765 hrs....................................$91,000 Komatsu PC300LC-7 w/Shear, ‘06, 7,463 hrs ..................$265,000 Komatsu PC300LC-7EO, ’06, 6,449 hrs ..............................$85,000 Komatsu PC300LC-7EO, ’06, 7,736 hrs ............................$110,000 Komatsu PC300LC-8, ‘09, 9,584 hrs..................................$119,000 Komatsu PC360LC-10, ’15, 838 hrs ..................................$250,000 Komatsu PC360LC-10, ’15, 1,018 hrs................................$250,000 Komatsu PC360LC-10, ’13, 2,510 hrs................................$179,000 Komatsu PC360LC-10, ’12, 1,148 hrs................................$264,500 Komatsu PC390LC-10, ‘15, 1,545 hrs................................$275,000 Komatsu PC400LC-7, ’06, 10,544 hrs..................................$70,000 Komatsu PC400LC-7EO, ’07, 10,949 hrs ............................$84,000 Komatsu PC400LC-8, ‘08, 7,118 hrs..................................$127,000 Komatsu PC400LC-8, ‘09, 6,677 hrs..................................$140,000 Komatsu PC490LC-10, ‘13, 2,977 hrs................................$268,999 Komatsu PC490LC-10, ‘12, 3,273 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 4,306 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 5,371 hrs................................$239,000 Komatsu PC600LC-7, ’05, 10,328 hrs................................$199,500 Komatsu PC600LC-7, ’06, 11,372 hrs................................$139,000 Komatsu PC600LC-8, ’06, 10,478 hrs................................$199,500 Link Belt 250 X3 LF, ‘12, 3,437 hrs....................................$120,000 Volvo EC220DL, ’13, 2,151 hrs ..........................................$134,500 Volvo EC380DL, ‘11, 4,017 hrs ..........................................$150,000

Case TV380, ‘11, 1,945 hrs..................................................$45,000 New Holland L230, ’14, 295 hrs ..........................................$49,399

FORESTRY

Hydro-Ax 411 EX, ’98, 7,547 hrs..........................................$35,000 Komatsu 911.4, ‘09, 7,544 hrs....................................................Call Komatsu 911.4, ’11, 6,132 hrs....................................................Call Komatsu 911.4, ’10, 5,225 hrs....................................................Call Komatsu 911.5, ‘13, 6,160 hrs....................................................Call Komatsu 931.1, ‘14, 4,000 hrs ..........................................$425,000 Ponsse Ergo Harvester, ‘05, 13,239 hrs ....................................Call Ponsse HS10 Cobra, ’99, 20,995 hrs ..................................$64,900 Ponsse Buffalo, ’02, 22,200 hrs ........................................$119,000 Ponsse Ergo HS16, ’99, 17,676 hrs ....................................$79,900 Valmet 911.1, ‘02, 22,196 hrs ....................................................Call

MATERIAL HANDLERS Cat 365CL-MH, ‘08, 10,428 hrs ........................................$137,500 Komatsu P400LC-8MH, ’08, 6,095 hrs ..............................$219,500 Sennebogen 825M D, ’13, 17 hrs ..............................................Call

OFF HIGHWAY TRUCKS Komatsu HD465-7, ’06, 18,843..........................................$219,500 Komatsu HD605-7EO, ’08, 20,247 hrs ..............................$130,000

WATER TRUCKS Komatsu HM300-2 6,500 Gal, ’12, 7,764 hrs....................$255,000

MILLING Wirtgen W60, ’08, 628 hrs ................................................$144,900 Wirtgen W2000, ‘08, 7,798 hrs..........................................$199,999 Wirtgen W2100, ’04, 8,538 hrs..........................................$209,500

Komatsu PC300LC-7EO, ’06, 6,449 hrs ..$85,000

V I S I T

COMPACTION Bomag BC61RB, ’00, 15,862 hrs ........................................$49,900 Bomag BC1172RB, ’05, 15,531 hrs ....................................$89,900 Hamm HD12VV, ’12, 4,531 hrs ............................................$15,000 Hamm HD120HV, ‘03, 2,690 hrs ..........................................$32,999 Hamm HD120HV, ‘04, 3,211 hrs ..........................................$30,000 Stone WP4100 Double Drum, ‘09, 1,018 hrs ......................$14,599 Volvo DD15, ‘14, 631 hrs ....................................................$23,000

PAVING IR 550P, ‘91, 2,010 hrs ..........................................................$9,000 Leeboy 8000D, ‘03, 2,390 hrs..............................................$33,000 Leeboy 8500, ‘03, 3,521 hrs ................................................$25,000 Leeboy 8500T, ’06, 5,859 hrs ..............................................$25,000 Vogele 5203-2, ’08, 4,307 hrs ............................................$99,000 Vogele 880WB, ’05, 5,862 hrs ............................................$26,699

WHEEL LOADERS Deere 544K, ’13, 1,023 hrs ..................................................$P.O.R. Deere 624K, ’13, 948 hrs ......................................................$P.O.R. Deere 624K, ’13, 905 hrs ......................................................$P.O.R. Komatsu WA200PZ-6, ‘14, 957 hrs....................................$115,000 Komatsu WA270-7, ’15, 916 hrs........................................$120,000 Komatsu WA320-7, ‘16, 116 hrs........................................$159,800 Komatsu WA320-7, ’14, 1,171 hrs ....................................$136,000 Komatsu WA380, ‘95, 7,833 hrs ..........................................$35,000 Komatsu WA380-6, ’11, 2,888 hrs ....................................$150,000 Komatsu WA380-6, ’12, 2,571 hrs ....................................$165,000 Komatsu WA380-7, ‘12, 3,025 hrs ....................................$147,500 Komatsu WA400-5L, ’05, 10,968 hrs ..................................$72,999 Komatsu WA430-6, ‘11, 4,377 hrs ....................................$167,500 Komatsu WA500-6, ‘09, 9,628 hrs ....................................$207,299 Komatsu WA500-6, ’09, 19,098 hrs ..................................$125,000 Komatsu WA500-6, ’09, 8,621 hrs ....................................$211,399 Terex TL300-2, ’08, 2,441 hrs..............................................$69,500

TRAILERS Felling FT-50-3, ‘05 ............................................................$19,000

Komatsu PC600LC-7, ’06, 11,372 hrs ..$139,000

Financing Available for Qualified Buyers

16 Roland Branch Locations in IL, IN, MI, MO, and WI

Call AJ Perisho (217) 789-7711 • Email: aperisho@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 7

PAVERS / ROAD WIDENERS BOMAG CR362L - ‘14, 780 Hrs, Track Paver, Stretch 16 Electric Screed, Topcon V System and More, #C000555, OBO ....................................................................................................$259,950 BOMAG CR452L - ‘15, 296 Hrs, Rubber Tired Paver, w/Stretch 20E, Top Con Controls, OBO, #C000764 ............................................................................................................................P.O.R. BOMAG CR662RM - ‘15, 230 Hrs, Material Transfer w/Hopper, #C000763 ....................$435,950 LEEBOY 8500 HD - ‘00, 2915 Hrs, Hatz 3 Cylinder, Diesel Engine w/8-15’ Legend Propane Screed Electronic Grade Controls, Ready to Work, #C000969..........................................$31,000 MIDLAND SPD6 - ‘15, 452 Hrs, Right and Left Discharge 1-6 ft, Hyd Strike Off, Hyd Pushrollers, Washdown System, #C000820 ........................................................................................$99,950 MIDLAND SPR6 - ‘15, 200 Hrs, Right Hand Discharge, 1-6ft, # C000914 ......................$101,950 MIDLAND SPD8 - ‘16, 92 Hrs, Dual Discharge to 8 ft, #C001018 ..................................$165,950 MIDLAND SP10 - ‘03, 3682 Hrs, Dual Discharge, Deere Powered, ***3-1ft Ext, 4-2ft Ext, 2-3-4ft Hyd Ext, #C000926 ..............................................................................................$69,950 P.O.R. items may be on rent causing pricing and hours to vary.

MILLING MACHINES BOMAG BM600 - ‘16, 83 Hrs, 24” Drum, Load Out Conveyor ......................................$216,950 BOMAG BM1200/35 - ’15, 450 Hrs w/Tracks, 3ft and 4ft Drum, Front Conveyor, #C000846 ........ ........................................................................................................................................$369,950 BOMAG BM1300/30 - ‘16, 308 Hrs, 51”, 4 Track Milling Machine, #C000993 ..............$324,950 CATERPILLAR 950G - ‘03, Transfer Station Machines, Solid Tires ........3 From $31,950-$39,950

CRUSHING AND SCREENING KAFKA TRI PACK CONVEYOR - ‘14, 36” x 70’ ................................................................$115,950 NEW SANDVIK CJ412 PORTABLE JAW PLANT - ‘14, 47” x 33” + Much More ......................P.O.R.

ROLLERS SAKAI R2H2 - ‘16, 84”, 3 Wheel Static ................................................................CALL FOR PRICE SAKAI SW652 - ‘15, 386 Hrs, 58” Double Drum, Vibratory Rollers, #C000744................$70,468 SAKAI SW990 - ‘14, 1200 Hrs, 84” Double Drum Vibratory Roller, #RR10133 ................$93,950 SAKAI SW502 - ‘13, 964 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212 ..........................................................................................................................................$27,950 SAKAI SW300 - ‘13, 149 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ............ ..........................................................................................................................................$29,950 SAKAI GW750-2 - ‘14, 445 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ................ $112,200 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS

Manitowoc 12000 (‘07) 100 Ton Crawler Crane, 200’ Boom, 60’ Jib, 3rd Drum

Manitowoc 222 (‘02) 100 Ton Crawler Crane, 200’ Boom, 140’ Luffing Jib, 60’ Jib, 3rd Drum

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for:

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT JCI K-400 PORTABLE CONE CRUSHER, 400 HP Electric Feed Conveyor, Side Discharge Conveyor, Hyd. Leveling Jacks, Tri-Axle Running Gear, 2006 ................................................................................$345,000 JCI 6X20TD PORTABLE SCREEN PLANT, Underscreen Discharge Conveyor, Two (2) Cross Conveyors, Electric Control Panel, 2012 ..........................................................................................................$162,000 CEDARAPIDS 4136 PORTABLE TWIN ROLL PLANT, Allis 5’x16’ SD Screen, Cummins V-12 Power, Tandem Axle Chassis, Hydraulic Leveling ......................................................................................$61,000 METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen. 2003 Model Year......................................................................................................$360,000

CRANES MANITOWOC 14000, 2007, 220 Ton Crawler Crane, 292’ Boom, 70’ Jib, 48” Shoes, Self-Erecting System, Series 2 CWT ............................................................................................................P.O.R. GROVE TMS900E, 2005, 90 Ton Hyd Truck Crane, 142’ Boom, 56’ Jib, Aux Hoist, Boom Dolly ...... ..........................................................................................................................................$389,000 GROVE GMK5225, 2013, 225 Ton Hyd AT Crane, 210’ Boom, 112’ Jib, Aux Hoist, Boom Dolly ...... ................................................................................................................................................P.O.R.

SCRAP HANDLING EQUIPMENT

GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000 GRADALL XL4100 II - ‘05, 16664 Hrs, Workable, #C1052 ................................................$35,950

Contact Tim or Marty in Illinois

1-800-307-0221

treuss@finkbinerequipment.com mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

LIEBHERR R954BHD WITH A LABOUNTY MSD4500R SHEAR, Carrier and shear have been refurbished........................................................................................................................................CALL Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113 Visit us at: www.amstate.com

Page 8 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 OFF ROAD HAULERS

Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 very good condition . . . . . . . . . . . . . . . . . . .$159,000 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" TRUCKS & TRAILERS hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd (2) 48' Box Vans w/Liftgates, Good Condition . .CALL angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 AIR COMPRESSORS LANDSCAPING

CRAWLER TRACTORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, SPECIALS winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . type, (4) MH lights, excellent . . . . . . . . .From $5,200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. BACKHOES CRANES Case 580L Rubber Tire Loader Backhoe, 1997, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Ford 455C Loader Backhoe, 1990, 36” Rear Bucket, Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom 8532 HMR, Overall in Decent Condition . . . . .$10,500 anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 DRILLS MOTOR SCRAPERS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Cat 613C Water Wagon, 1994, 5000 gal drop tank, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good MISCELLANEOUS condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL (2) Balderson Broom Attachment for Cat IT Machines, Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Rivinius R600B, 1995, 10’ Wide, Mount on Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 HYDRAULIC EXCAVATORS JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL

ATTACHMENTS

BUCKETS PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sterett Navigates Challenging Wastewater Plant Lifts Periodically, crane service companies run into one of those lift projects where everything is seemingly stacked against them. Tight spaces filled with obstacles leave little room for crane assembly, let alone leaving little room to maneuver the load. Objects buried underground can limit the weight bearing load during the lift. And the weight, size and shape of the object to be lifted makes it necessary to expertly select the right crane — compact enough to work in the congested site yet still provide capacity— to pull off the challenging pick. Crane service and rental company, Sterett Crane & Rigging of Owensboro, Ky., recently completed work on one such impossible project for the city of Evansville, Ind. Working with Bowen Engineering, a heavy civil construction company based out of Indianapolis, Sterett’s expertise was required to complete lid removal and replacement of the eight anaerobic digester tanks, critical to the water treatment program at the East and West Evansville Wastewater Treatment Plants (WWTP). “Having sufficient space alone to bring in and assemble the crane was challenging enough,” said Matt Crisp, crawler crane fleet manager of Sterett, about the congested project site at the 34-yearold facilities. “In order to remove the massive tank lids that weighed in excess of 250,000 pounds each, we needed to mobilize a crane that was small enough to fit into and maneuver in the tight area, while at the same time offer the capacity to lift the heavy lids.” Sterett used Terex CC 2400-1 lattice boom crawler crane for the WWTP project. With its 440-ton (400-t) capacity, the Terex crane offered power to lift the heavy loads, and its Vario-Superlift structure feature proved to be the factor Sterett needed to successfully maneuver about the site at full load, according to the crane’s rated capacities. Variable Radius — the Clincher The digester tank lids were being removed and relocated for sandblasting and refurbishment. Each tank lid weighed between

Working with Bowen Engineering, a heavy civil construction company based out of Indianapolis, Sterett’s expertise was required to complete lid removal and replacement of the eight anaerobic digester tanks, critical to the water treatment program at the East and West Evansville Wastewater Treatment Plants (WWTP).

258,000 to 274,000 lb. (117 to 124.3 t). The weight of the load required the CC 2400-1 crane to be equipped in its Superlift configuration, but as the crane’s body swung the lids into position to lower them onto the concrete cribbing, the Superlift tray had to maneuver past site barriers. “The lids alone were 75 feet in diameter, and we had to rig to them at 16 points,” said Crisp. “The plan was to pick the lid at a 91 foot radius, boom up, move the crane a short distance and then swing the ring into position for lowering it onto the cribbing. However, often a tank obstructed the path of the tray as we swung the load, and, at times, we had to be cognizant of the crane’s ground contact pressure.” Normally, assist equipment would be called in to unstack and restack tray counterweight as it maneuvers around the obstruction, but the CC 2400-1 crawler crane features variable tray positioning for the Superlift structure that increases the crane’s flexibility for use in congested areas. “The Vario-Superlift configuration on the CC 2400-1 crane offers

“In order to remove the massive tank lids that weighed in excess of 250,000 pounds each, we needed to mobilize a crane that was small enough to fit into and maneuver in the tight area, while at the same time offer the capacity to lift the heavy lids.” Matt Crisp

Sterett Crane & Rigging

a variable radius from 36 to 49.2 feet during operation,” said Daiane Laidler, regional business manager of Terex Cranes. “The Superlift can be configured with up to a 98.4 foot mast and counterweight tray with a maximum weight of 529,200 pounds.” The ability to vary Superlift tray radius not only improved lift efficiency for Sterett, it also resulted in savings. “We saved money on matting, since we varied tray radius during the lift and were not required to stack and unstack the

counterweight,” said Crisp. “The (Vario) tray helped us to save time and money on the assist equipment as well.” Precision and Planning Sterett mobilized its Terex CC 2400-1 crawler crane a short distance from Elberfeld, Ind., to Evansville. Within two days, the 25 truckloads of crane, boom, counterweight and supporting equipment arrived at the Evansville WWTP. “There was only one way in and out of the

plant site, and we had to maneuver around many underground lines and tunnels,” said Crisp. Sterett’s five-man crew, along with an operator from Bowen running the setup assist crane, quickly assembled the 440-ton (400-t) crane complete with Superlift attachment, and it was ready for operation within three days of arriving on site. “It was a very tight and congested assembly area,” he said. For lifting the massive lids, the CC 2400-1 was configured with 137 ft. (42 m) of main boom. Crew members added 264,500 lb (120 t) of counterweight to the superstructure and additional 44,000 lb (20 t) of central ballast. The crane was equipped with the full 98.4 ft. (30 m) of Superlift mast, and the tray was loaded with 352,700 lb. (160 tonnes) of counterweight. Rigged and ready for the lifts, the CC 2400-1 operated atop timber planks to help spread the ground contact pressure of the crane load. The initial pick of the 10-ft. (3 m) tall by 75-ft. (22.9 m) diameter lids was made at the 91ft. (27.7 m) main boom radius, and see STERETT page 36

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309

GEORGIA Buford 678.318.9500 Savannah 912.964.8079

SOUTH CAROLINA North Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

incredible fuel efficiency outstanding power & productivity Volvo is with you. Optimum power, versatility and fuel efficiency comes with the name you’ve trusted for over 80 years. With unwavering reliability and dependability, Volvo ensures you get the job done day after day.

ascvolvo.com

Smart Works.

Page 12 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2015 Bobcat S595 - Call for Details

Bobcat Excavators in Stock, Call for Pricing

Bobcat Toolcats In Stock

Doosan DX140LC Excavator Available for Rent

Largest Selection in the Midwest! ®

Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000

Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500

Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000

2015 Bobcat T770 - Call for Details

Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Authorized Bobcat Dealer

U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 13

> ÊÕÃÊÌ `>ÞtÊ ÀÞ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ

ww ww.RBused.com

Celeb bratiing g our 30th Year!

2011 KOMATSU D37EX-22, #82569, OROPS, NEW PAINT, COMPLETE NEW U/C, SERVICED, NEW CUTTING EDGES, 1,800 HRS..........$73,450

2001 KOMATSU D41P-6, #92307, OROPS, 27.5" SHOES, SWEEPS, 4,900 HRS..................$37,500

2009 KOMATSU D51PX-22, #81998, CAB/AC, PAT BLADE, REAR SCREEN, KOMTRAX, 4,500 HRS........................................................$124,500

2005 KOMATSU D61PX-15, #91005, CAB/AC, 6-WAY BLADE, 34" TRACKS, 5,700 HRS .............. ..............................................................$119,500

2012 KOMATSU D65EX-17, #92180, CAB/AC, 24" SHOES, SIGMA BLADE, RIPPER, KOMTRAX, 2,500 HRS ............................................$199,500

2011 KOMATSU D65WX-16, #81664, CAB/AC, 30" SHOES, RIPPER, SIGMA BLADE, KOMTRAX, 3,400 HRS ............................................$199,500

2007 KOMATSU D85EX-15E0, #92105, CAB/AC, 24" TRACKS, REAR HYD, COUNTERWEIGHTS, 8,200 HRS ............................................$179,500

2007 CAT D6T XL, #81914, CAB/AC, 24" SHOES, 5,900 HRS ............................................$219,500

2014 KOMATSU PC88MR-10, #92381, CAB/AC, 2012 KOMATSU PC138US LC-8, #82648, CAB, 2007 KOMATSU PC200 LC-8, #82381, CAB/AC, 2005 KOMATSU PC160 LC-7, #82702, CAB/AC, 11'2" BOOM, 7' ARM, 18" SHOES, AUX HYDS, QC, 23.5" SHOES, STEEL TRACKS, BLADE, AUX 16' BOOM, 8'6" ARM, 23.5" SHOES, 6,500 HRS .... QC, AUX HYD, STRICKLAND THUMB, KOMTRAX, 1,800 HRS ..............................................$89,500 HYDS, STRICKLAND HYD THUMB, 2,000 HRS .... ................................................................$79,500 4,700 HRS ............................................$119,500 ..............................................................$119,500

2013 KOMATSU PC240 LC-10, #82717, CAB/AC, 19' BOOM, 15' ARM, 31.5" SHOES, AUX HYD, QC, 1,500 HRS ......................................$199,500

2006 KOMATSU PC300 LC-7E0, #91808, CAB/AC, 33.5" TRACKS, 13' ARM, AUX HYD, JRB QC, KOMTRAX, 5,600 HRS....................$169,500

2012 KOMATSU PC360 LC-10, #81990, CAB/AC, 33.5" SHOES, 10'6" ARM, KOMTRAX, REAR CAMERA, 3,100 HRS ............................$199,500

2005 KOMATSU PC400 LC-7, #91940, CAB/AC, 36" SHOES, 15'9" ARM, JRB QC, 7,800 HRS .......... ..............................................................$149,500

Page 14 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construct a Perfect Holiday With CEG’s Gift Guide By Brenda Ruggiero CEG CORRESPONDENT

It’s gift-giving time again, and CEG has compiled a list of ideas for every construction lover on your list, from the littlest tikes to those who have been around the site a few times. There are even a few selections for four-legged family members. Carter’s Pajamas This toddler boy’s pajama set from Carters comes in a fun construction print. The 4-piece cotton set includes a short-sleeved shirt, a long-sleeved shirt, and two pairs of pants and comes in a variety of sizes. The list price is $34 at Kohls. http://www.kohls.com/product/prd-2596420/toddlerboy-carters-4-pc-print-pajama-set.jsp?ci_mcc =ci&utm_campaign=INF%20TOD%20SLEEPWEAR&utm_medium=CSE&utm_source=google &utm_ product=18045902&CID=shopping15& gclid=COLc7vCKktACFdJZhgodZ_8Ahg&gclsrc =aw.ds&dclid=CMPNgvKKktACFVEENwods7UL8Q Construction Rubber Ducks These assorted vinyl rubber ducky construction workers are ready to get to work with their hard hats and tools. They measure 2 in. (5 cm), and can be bought separately for $.99 each or by the dozen for $6.49, making them a great choice for stocking stuffers or party favors. http://www.partypalooza.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code= ConstructionRubberDucky&gclid=CJiag_ uKktACFdJZhgodZ_ Pallet of Concrete Chocolate is always a good choice, and when it is part of a novelty gift, it’s even better. This gift includes 14 oz. (397 g) of milk chocolate concrete bags on a real miniwooden pallet. Price: $24.99 http://www.applecookies.com/builder-contractorconstruction/pallet-of-concrete/

Cast Iron Tool Bottle Openers These whimsical, yet functional, cast iron bottle openers are designed to mimic the look and feel of classic tools. They come in a choice of a wrench or a hammer, for $19 each. http://www.uncommongoods.com/product/castiron-tool-bottle-openers

Crawler Crane Glass Ornament Construction equipment enthusiasts will appreciate this glass and resin ornament. It features a yellow construction crane with a gold glitter wire jib. It measures 5.75 in. (14.6 cm) tall, and is ready to hang with a gold cord. The list price is $11.99. https://www.bronners.com/product/crawler-craneglass-ornament.do?sortby=ourPicks&refType=&from =fn&ecList= 7&ecCategory=100477

Guidecraft Construction Truck Sort-and-Match Learning Toy Set Shape-matching, sorting and pattern-recognition are even more fun to learn with construction vehicle shapes. The set includes six double-sided pattern cards and plastic pieces, a game board with stand, and a storage box. For children 3 and up, this set sells for $39.99. http://www.jcpenney.com/guidecraft-construction-truck-sort-and-match-learning-toyset/prod.jump?ppId=pp5006290290 &catId=SearchResults&searchTerm=construction

King Force Crane RC Construction Vehicle A crane, a transmitter, and a little imagination will turn a backyard into a construction site. This plastic toy is 31 in. (79 cm) high and runs on six AA batteries. It retails for $25.99. https://www.overstock.com/Sports-Toys/KingForce-Crane-RC-Construction-Vehicle/8548516/ product.html?refccid=CAK6N5PF5DCLLWSCOSA3BPL Z5A&searchidx=0

Red Balloon Construction Site Time Teacher Kids Stainless Steel Watch Kids will love learning to tell time with this Time Teacher quartz watch. Construction equipment and road signs on both the dial and the colorful fabric strap, and labeled hour and minute hands make it easy to tell time. It comes in a stainless steel case and features 3ATM water resistance. It retails for $31.99. http://www.jcpenney.com/red-balloon-construction-site-time-teacher-kids-stainless-steelwatch/prod.jump?ppId=pp5003060822 &catId=SearchResults&searchTerm=construction

see GIFTS page 38

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 15

Lull 944E-42, 9000lb, JD 700K, LGP, 30” 42’, 4x4, #98046............ Pads, 132” PAT Blade, 722 hours, #99982 ........ ........................$61,000 ......................$163,000

JD 160DLC, 10’2” Arm, JD 180GLC, 10’ 6” Arm, JD 350GLC, 10’ 6” Arm, 28” Pads, Aux Hyd, 32” Pads, #98673.......... 28” Pads, Hyd Thumb, 2020 Hrs, #94937.......... #97839 ..........$129,000 ......................$169,000 ........................$117,500

CEC Screen, 6 x 16 JD 9630, Scraper Tractor, #98203.............. Wheeled Screen, ........................$129,000 #91758 ..........$259,000

Bomag BW213PDH-3, JD 350GLC Material JD 670G, Low Cab, Air, 84” Padfoot, #92390...... Handler, 1111 Hrs, 12’ Blade, #75388 ........ ........................$85,000 #52129 ..........$398,000 ......................$109,000

JD 410J, Cab, Air, 4x4, JD 624K, Cab, Air, Hi Lift, GP Bucket, #95215 Ext Hoe, Aux Hyd, 854 ......................$149,000 Hrs, #100766....$83,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 135G, 9’ 11” Arm, 28” JD 755D, 22” Pads, GP Pads, Mech Thumb, Bucket, 2532 hours, #95722 ............$134,000 #98185 ..........$149,500

JD 850K, LGP, 36” JD 710K, Cab, Air, 4x4, JD 650J, LGP, 24” Pads, 152” Semi U Ext Hoe, Aux Hyd, 638 Pads, 124” PAT Blade, Blade, #75189 $179,000 hours, #99440 $125,000 #99973 ............$62,500

JD 544J, Powerlell, QC, JD 550K, LGP, 24” GP Bucket, #93862 ...... Pads, 124” Blade, #96606............$119,000 ........................$84,000

Page 16 â€˘ December 3, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke â€˘ (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ÂŽ

View our complete Used & â€œLike Newâ€? inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2007 Case SV208, s/n DDD002010, 1600 Hours, ROPS, 66â€? Wide Smooth Drum Roller .. ............................................................$47,700

2012 Case CX160C, s/n DAC160K6NCSAF1112, 2500 Hours, Cab w/AC, 9â€™11â€? Arm, 24â€? Shoes, Single Acting Hyds, Coupler, Warranty Through 03/17 ......$113,850

2012 Case CX350C, s/n DAC350K6NCSAP1212, 2150 Hours, Cab w/AC, 10â€™8â€? Arm, 32â€? Shoes, Single Acting Hyds, Coupler, Warranty through 07/17 ..................................................$189,750

2012 Case CX210C, s/n DAC210K6NCSAH1134, 1820 Hours, Cab w/AC, 9â€™8â€? Arm, 32â€? Shoes, Double Acting Hyds, Coupler, Warranty through 03/17 ......$126,900

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

McHenry* 815-385-0420

Rent Today!

Wauconda 847-526-9444 2012 Case DV202, s/n DDDDV202NCTF2016, 1175 Hrs, ROPS, Right Side Drive Lever, 47â€? Drum ....................................................$24,800

Case SV208PD, s/n DDD002057, 1000 Hours, Rops, 66 inch Pad foot Roller, Blade....$47,700

Case 410, s/n N8M494216,1455 Hours, Rops, Manual Coupler, New engine @ 1415 Hours, 10 x16.5 Tires, 66â€? Bucket ........................$14,000

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2006 Case 580SM, s/n N6C412119, 4600 Hours, Cab w/ Heat and AC, 4 WD, Ext-hoe, Ride Control, Two Lever,82â€? Bucket, 12â€? and 24â€? Bkt..................................................$39,550

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Indiana Schererville* 219-865-6545 *Case authorized dealer location

Custom Made Products Co. Humboldt, IA Lease To Own

(800) 760-7871 Call Anytime

www.gncmp.com 100+ Scrapers on Hand at 16 Locations FOR SALE OR FOR RENT

Locations: Humboldt, Bayard, De Soto, Iowa Falls, Liscomb, Manchester, Britt, Osceola, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton, IA, Wayne, NE & La Plata, MO

2013 Takeuchi TB016 3,524# Excavator with O-ROPS, Adj. Rubber Tracks, Travel Alarm, Quick Coupler, Aux

2011 Takeuchi TB235 7,950# Excavator w/ Cab, Heat, A A/C, /C, $QJOH %ODGH 4XLFN &RXSOHU $X[ +\G 7KXPE Â´ %XFNHW

2012 Takeuchi TB180FR 18,300## Zero Tail Swing Excavator w/ Cab, Heat, A A/C, /C, /C Qu Q ick Coupler, Aux Hyd, Travel Alarm, &

+\G Â´ %XFNHW KUV ,' ÂŤ

KUV ,' ÂŤ

Â´ %XFNHW KUV ,' $ ÂŤ

We Will Not Be Undersold!

elivery! Free Dst areas *to mo

18 yd Ashland I-180 TS2s (Used) Call

2013 Mustang 2076 skid with 2,200## Cap, O-ROPS, H/F Ctrls, 2Speed, Aux Hyd, & Block Heater. KUV ,' $ÂŤ

2013 Mustang 2076 skid with w 2,500# Cap, Cab, Heat, Joystick Ctrls, 2Speed, & PowerTach.

2013 Mustang 2076 skid with 2,500## Cap, Cab, Heat, A/C, Joystick Ctrls, 2Speed, & PowerTach.

KUV ,' ÂŤ

KUV ,' $ÂŤ

GRADERS

HOLCOMB

Artâ€™s-Way Graders, (New & Used) ................................................Call Johnson Graders (New & Used)....................................................Call 8â€™-16â€™ With & Without Rear Steer

8 yd to 18 yd, (Dolly Wheel or Direct Mount - New & Used) ........Call

ASHLAND 18yd Ashland I-180 TS2s, (Used) ................................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call 15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call 13yd Ashland I-130 TS2s, (Used) ................................................Call Ashland I-130 XL2, (Used)............................................................Call Ashland I-140 TS2, (New) ............................................................Call 14yd Ashland I-140 XL2s, (New & Used) ....................................Call 11yd Ashland I-110 TS2s, (Used) ................................................Call 11yd Ashland I-110 XL2s, (Used) ................................................Call 9 1/2yd Ashland I-950s, (New & Used) ........................................Call Ashland Groundhog GH2500, (New & Used) ................................Call

GARFIELD

2009 Gehl CTL55 track loader with 1,246# Cap, 51hp, O-5236 -R\VWLFN &WUOV VSG $X[ +\G Â´ %XFNHW

2011 Takeuchi TL250 track loader with 2,624# Cap, Cab, Heat, Aux Hyd, Hyd QuickTach.

2014 Takeuchi TL12 track loader with 2,800# Cap, Cab, Heat, A A//C, Aux Hyd, Pattern Select, Ride Control,

KUV ,' ÂŤ

KUV ,' $ÂŤ

KUV ,' ÂŤ

- - _ 'HV 0RLQHV Ä &HGDU 5DSLGV Ä :DWHUORR Ä $PHV _ ZZZ Z VWDUHTXLS FRP

14 yd Ashland I-140 XL2s (New & Used) Call

12yd Garfield Model 1150s, (Used)..............................................Call 13yd Garfield 1350s, (New & Used) ............................................Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

BIG DOG 8 yd Big Dogs, (New & Used) ......................................................Call 6 1/2 yd Big Dogs, (New & Used) ................................................Call 5 yd Big Dogs, (New & Used) ......................................................Call 12â€™ Feedlot Box Scrapers..............................................................Call 10â€™ Feedlot Box Scrapers..............................................................Call 12â€™ Box Scrapers ..........................................................................Call 10â€™ Box Scrapers ..........................................................................Call 8â€™ Box Scrapers ............................................................................Call

IRONWOLF 8-14 yd ..........................................................................................Call

LEON 10-13 1/2 yd ..................................................................................Call

ROWSE 7 yd Rowse Model 7002 & 7004 ..................................................Call 5 yd Rowse Model 7002 & 7004 ..................................................Call 3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS 1 1/2 yd, 3 yd & 4yd Durabilts, (New & Used) ............................Call 3/4 yd G&A Mini Scraper, (New & Used)......................................Call

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 17

USED EQUIPMENT .com

TRUSTED MACHINES FROM A TRUSTED DEALER.

2013 CATERPILLAR 730, ID# PBU0068, S/N B1M04303, 3940 HOURS........................................$266,000

2014 CATERPILLAR 12M2, ID# PUC0165, S/N R9S00333, 502 HOURS ..........................................$236,600

2007 CATERPILLAR 140HNA, ID# PUC0207, S/N APM03729, 6640 HOURS ......................................$127,600

2011 CATERPILLAR 140M2, ID# PUC0065, S/N M9D00242, 5899 HOURS ......................................$150,700

2012 CATERPILLAR 312EL, ID# 2CR5158, S/N MJD00292, 4457 HOURS ..........................................$86,240

2011 CATERPILLAR 420E, ID# PUC0161, S/N DJL01485, 3397 HOURS............................................$53,900

2006 CATERPILLAR 953C, ID# PBU0074, S/N BBX02737, 3161 HOURS........................................$105,000

2015 CATERPILLAR 272D, ID# PUC062, S/N B5W00981, 3692 HOURS ........................................$30,400

2014 CATERPILLAR 966K, ID# HUC0299, S/N TFS01231, 5357 HOURS ........................................$239,400

2015 CATERPILLAR 262D, ID# PUC0140, S/N DTB03436, 39 HOURS ..............................................$45,500

2009 CATERPILLAR 289C, ID# PUC0201, S/N JMP00749, 2307 HOURS............................................$39,900

2014 CATERPILLAR 262D, ID# HUC0361, SN# DTB01351, 1760 HOURS ..........................................$33,700

2013 CATERPILLAR 246D, ID# PUC0078, SN# BYF00250, 327 HOURS....................................$34,700

2012 CATERPILLAR 272D, ID# PUC0209, S/N GSL00398, 811 HOURS ............................................$38,200

2012 CATERPILLAR 257B3, ID# PUC0148, S/N B7H01086, 591 HOURS ............................................$38,500

2007 CATERPILAR 277C, ID# PUC0133, SN# JWF00243, 4533 HOURS ................................$24,500

Page 18 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Largest Single Solar Facility in Midwest to Come Online By Cindy Riley CEG CORRESPONDENT

The largest single solar facility in the Midwest is gearing up to deliver clean energy to customers. A ribbon cutting ceremony was recently held in Minnesota to mark the end of construction on the North Star Solar project, which is expected to produce enough energy to power more than 20,000 homes. Swinerton Renewable Energy built the new facility — one of the biggest in the nation — and employed more than 300 people during the height of construction. “Physical construction of the site was the most critical aspect of the build, since the site needed to be completed and tested prior to winter weather affecting irradiance levels,” said Brian Hoopes, Swinerton project manager. “With testing still ongoing, we are working to complete all testing prior to the onset of snowfall. “Coordination with the utility was critical, as they had to construct a new bay in their substation to accept electricity generated by the solar project. They were very on top of their work, though, and had it completed and ready for the site a couple months before it was crucial.” Expected to come online in December 2016, North Star Solar will generate 100 megawatts of electricity, and is a $180 million investment in Minnesota and Chisago County. The project broke ground in April. The site is still being commissioned and tested to confirm it has been built to the owner’s expectations. “The cold weather climate for the project was a challenge in a couple ways,” said Hoopes. “Due to potential frost heave if an ice lens layer develops, the steel pile foundations for the racking needed to be driven to a minimum of 14.4 foot embedment, which is about twice as deep as a standard foundation embedment. This additional depth provides for more protection against frost heave that can affect the racking alignment. “The cold weather could also affect the battery storage for the racking motors. If temperatures drop below a certain threshold, the batteries can discharge to keep

Swinerton Renewable Energy photo

The largest single solar facility in the Midwest is gearing up to deliver clean energy to customers.

Swinerton Renewable Energy photo

A ribbon-cutting ceremony recently was held in Minnesota to mark the end of construction on the North Star Solar project, which is expected to produce enough energy to power more than 20,000 homes.

themselves warm and permanently reduce their capacity and lifespan. To address this, a permanent 24vDC electrical supply was brought in from the skids to each battery to power a resistor that provided the necessary heat to the insulated battery, keeping it above critical temperatures.” There are a total of 441,612 modules on the site. A consistent

7,000 to 8,000 modules were installed per day by crews on site, composed of mostly local workers. The panels, roughly 6 by 3 ft. (1.8 by .9 m) and weighing approximately 50 lbs. (22.6 kg) each, arrived in enclosed trucks, palletized and wrapped for protection. They were transported from ports on the east and west coasts. “This was a three-person activi-

ty, with two people lifting up the module on either side and placing it on the clamps that attach it to the racking, with the third person coming behind them to tighten the clamps and confirm proper torque was achieved,” said Hoopes. “The racking installation typically takes the most time, with many individual pieces to install. Each component needs to be riveted or bolted to the correct spec and in correct alignment to confirm that the racking will track on its axis properly and not bind up or damage itself.” Hoopes said the soil was very sandy, and was not historically conducive to high-yield agricultural growth, which drove some of the landowner decision making in long-term leases or selling of their properties to provide the needed acreage for constructing the project. “There was some localized tree removal needed to create the footprint of the solar site, but not a significant amount given the overall amount of land needed for the project. Perimeter trees and existing wind-breaks were kept intact as much as possible for the native and existing vegetation to remain in place. There was a significant amount of seeding that occurred

after ground disturbance was completed which involved hundreds of acres of native prairie grasses and pollinator mixes to promote animal, insect and bee populations.” Hoopes said the impact of the project is far reaching. “The site employed hundreds of Minnesotans and paid millions of dollars in wages, in addition to millions of dollars paid to local vendors and subcontractors. It’s always a great experience to work with talented, local individuals and bring some economic benefit to an area.” Main equipment used on the job included scrapers and dozers for minor earthwork and the construction of site access roads within the solar arrays. A large trencher was used for digging the trenches where the direct-bury electrical conductors were placed. Roughly 10 pile drivers were on site installing piles for the foundations. Heavy machinery such as JLGs and other forklifts were used for the receiving, staging and installation of the physical components of the site. Main materials used during construction included steel piles for foundations, single-axis tracker components, PV modules, AC and DC electrical conductors, transformers and inverters for converting DC to AC power from the modules and steeping it up to grid voltage for the off-taker/utility. NEXTracker supplied singleaxis trackers, a combined hardware and software solution for all size solar power plants in front of and behind the meter. Described as the backbone and brains of the solar power plant, the trackers work in concert with the panels to collect energy and inverters taking this energy from DC to AC power that can be fed into a commercial electrical grid or used by a local, off-grid electrical network. “Solar trackers allow for the power plant to gain an additional 20-25 percent more energy, due to structure’s capability to rotate and face the solar panel towards the sun from sunrise to sunset, versus fixed tilt racking and mounting solutions that are much more limited in energy production,” said Ryan Booth, NEXTracker vice president of sales. see SOLAR page 32

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 19

Volvo Used Equipment Contact your local dealer:

2012 Volvo EC480DL CALL

2014 Volvo L90G $157,900

2012 Volvo EC340DL $170,000

John Doe 123.456.7890 john.doe@dealer.com

2000 Volvo L30 CALL 2012 Volvo A40F, 2999 Hrs............$500,000

Jane Doe 123.456.7890 jane.doe@dealer.com

Dealer Name City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 Contact your local dealer: City, ST

Aring Equipment 123.456.7890 Company, Inc. 13001 City, STW. Silver Spring Drive Butler, WI 53007 123.456.7890 City,King ST Jim 123.456.7890 262.781.3770 Mobile: 414.530.0592 City, 262.781.5053 ST Fax: 123.456.7890 Email: jking@aring.com www.aringequipment.com

2011 Volvo DD138HF 2012 Cat D6T XLVP $75,000 $219,500 2012 Volvo A40F, 2999 Hrs............$500,000

2012 Volvo A40F $405,000

A40 Finance leasing available for 24 months with payments as low as $7,800 per month. Call Doug Wilson for details.

Asphalt/Pavers/Concrete Equipment

Excavators – Wheeled

Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2012 A25F 2011 Volvo L220G Model,Volvo Hours ............................................................................... $XXX,XXX $189,500 $247,500 Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

Excavators – Crawler Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2013 Volvo EC300DLR 2015 Volvo L70H Model, Hours ............................................................................... $XXX,XXX $220,000 $167,500

Motor Graders Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

2014 Volvo L110H CALL

DO NOT RUN COPY BELOW THIS RULE

DEALER LOGO

2012 Volvo A25F 2012 Volvo$189,500 A40F, 2999 Hrs............$500,000

2012 Volvo L70F CALL

Page 20 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

A SHINING EXAMPLE OF CUSTOMER INPUT. Our new 324E Skid Steer packs customer-inspired features and performance into an agile, XOWUD HI ƟFLHQW FRPSDFW GHVLJQ It features exceptional reach at truck beds, connect-underpressure auxiliar y couplers, and your choice of controls including our exclusive switchable electrohydraulic (EH) option that lets you select among dif ferent control patterns, at any time, at the push of a button. TTo o learn more, see your dealer or visit our website.

Burnsville, MN 952-890-8880

Sauk Rapids, MN 320-259-6222

Grand Forks, ND 701-772-4842

Aberdeen, SD 605-225-6772

Rochester, MN 507-282-8888

Moorhead, MN 701-526-2200

Minot, ND 701-852-3962

Sioux Falls, SD 605-336-2730

North Mankato, MN 507-387-1836

Bismarck, ND 701-223-5798

Williston, ND 701-577-0736

Rapid City, SD 605-348-1566

Marshall, MN 507-532-0994

Dickinson, ND 701-483-0115 www.rdoequipment.com

constRuction eQuiPment guide • www.constructionequipmentguide.com • december 3, 2016 • Page 21

coRPoRate HQ

elmHuRst

Joliet

oglesby

RockfoRd

Hammond

635 W. Lake Street eLMhurSt, iL 60126

16822 W. LaraWay rd. JoLiet, iL 60433

590 Mayer St. ogLeSby, iL 61348

5055 South Main St. rockford, iL 61102

6400 indianapoLiS bLvd haMMond, in 46320

call bobby falcone 630-516-4456 www.pattencat.com

USED EQUIPMENT SPECIALS

2013 CAT 349E VG TRACK EXCAVATOR SER#: KCN00292 $240,000

2014 CAT 324EL HMR TRACK EXCAVATOR SER#: PNW01572 $219,000

2008 CAT 226B2 CAB SKIDSTEER LOADER SER# MJH12997 $21,000

2005 CAT 287B MULTI TERRAIN LOADER SER#: ZSA02044 $24,000

AC/HEAT, STRAIGHT TRAVEL, 36” TRACK, REAR CAMERA, HD PKG

AC/HEAT, AUX HYD, Q-COUPLER, REAR CAMERA, STRAIGHT TRAVEL PEDAL, GUARDING

EROPS, HEAT, AUX HYDRAULICS, STD FLOW, 60” GP BUCKET

EROPS, AC/HEAT, HYD COUPLER, AUX HYD, HIGH-FLOW

2006 CAT 430E IT BACKHOE LOADER SER# DDT00277 $32,500

2013 CAT 416F BACKHOE LOADER SER#: KSF00629 $65,000

2014 CAT 950K WHEEL LOADER SER#: R4A02045 $220,000

AC/HEAT, EROPS, RIDE CONTROL, 4WD, EXT STICK

AC/HEAT, EROPS, EXT STICK, 4WD, GP BUCKET 1.25CYD

AC/HEAT, RIDE CONTROL, Q-COUPLER, GP-BUCKET; 4.24 CYD, RADIO

2009 CAT CS56 SMOOTH DRUM ROLLER SER#: C5S00825 $92,500

1991 CAT 140G MOTOR GRADER SN# 72V14554 $73,000

2009 CAT 299C MULTI TERRAIN LOADER SER# JSP00363 $49,999

2006 CAT 277B MULTI TERRAIN LOADER SER#: MDH03980 $16,900

AC/HEAT, PRODUCT LINK, EROPS

EROPS, ALL WHEEL DRIVE, 12’ BLADE, LIGHTS

AC/HEAT, HYD Q-COUPLER, AUX HYD, STD FLOW, RADIO

OROPS, STANDARD FLOW, QUICK COUPLER, BUCKET

2012 CAT 730 ARTICULATED TRUCK SER#: B1M03871 $249,000 AC/HEAT, CD/RADIO, PRODUCT LINK, CERT EMISSIONS

2007 CAT D6RIIILGP SER# WRG00784 $75,000

1997 CAT D6R TRACK TYPR TRACTOR SER#: 9PN00643 $52,500

EROPS, AC/HEAT, S BLADE, LIGHTS, ACUGRADE READY

17854 HOURS, EROPS, BLADE; S, SINGLE ANGLE TILT, TOPCON CONTROLS

VISIT

WWW.PATTENCAT.COM

FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 22 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Southeastern Equipment…

Massive Amusement Complex…

Legoland Represents First Brick in New Way Refuse Dubai’s Southern Desert Expansion Trucks Available By Jon Gambrell ASSOCIATED PRESS

DUBAI, United Arab Emirates (AP) A massive amusement complex in Dubai’s southern desert opened its first park on Oct. 31 — a Legoland with interlocking plastic blocks that both model the sheikhdom’s architectural wonders and represent the first bricks laid in developing the expanse. Much of the planned Dubai Parks & Resorts project worth over $3 billion remains under construction along the dusty highway connecting Dubai to the United Arab Emirates capital of Abu Dhabi. In four years, however, Dubai’s rulers envision 25 million people coming to the area as part of the 2020 World Expo, or world’s fair. Dubai already has plans to one day handle more than 200 million passengers a year at the nearby Al Maktoum International Airport at Dubai World Central, as well as extend its driverless metro into these dunes far past its current terminus near the massive Jebel Ali Port. “A lot of things are happening already; we are not on our own,’’ Legoland Dubai general manager Siegfried Boerst told The Associated Press. “It’s not that we’re in the desert anymore.’’ Previously, the limits of touristfriendly Dubai ended when the tall towers of the Dubai Marina gave way to the industrial expanse of power plants and aluminum smelters in the city-state’s south. Now, both private and statebacked developers are rushing into the area ahead of the World Expo. One of the biggest bettors on the area is Dubai Parks & Resorts, which plans a series of attractions over 9.5 sq. mi. (25 square km). Beyond Legoland, the complex plans a movie-themed Motiongate park, a Bollywood park, a hotel and shopping district and even a Six Flags by late 2019. The company, trading under the name DXB Entertainments, lists its biggest shareholder with a 52-percent stake as Meraas, a firm backed by Dubai ruler Sheikh Mohammed bin Rashid Al Maktoum. Qatar Holding LLC, a subsidiary of Qatar’s sovereign wealth fund, holds 11 percent of the company, according to data from the Dubai

Financial Market stock exchange. The firm’s stock closed down 6 percent Monday to 43 cents a share. Dubai, already home to the long-haul airline Emirates, luxury malls and the world’s tallest building in the Burj Khalifa, already is a tourist draw. Authorities hope to have 20 million tourists visit a year by 2020, up from 14.2 million overnight visitors last year. Part of that involves broadening out Dubai’s tourist charm from just hard-partying adults. Legoland fits into that, as does the recently opened IMG Worlds of Adventure indoor amusement park. “There is so much more for the kids,’’ said Andrew Whitt of St. John’s in Newfoundland, Canada, who took his family to Legoland on Monday. “It’s nice to have more of this environment rather than just sit on a beach.’’ But his family’s quick duck inside an air-conditioned portion of the park showed the challenge facing the amusement complex. While Dubai is cooling down for the winter, its scorching summertime temperatures easily reach above 104 F with high humidity. Parts of Legoland offered covered walkways, but others involve walking in direct sunlight. “We designed Legoland specifically with the climate of the Middle East in mind,’’ Boerst said. “There’s shade all over the place, so people don’t need to be outside in the heat for a long time.’’ And inside the air-conditioned cool of the park’s Miniland, the park’s more than 60 million Lego bricks can be seen in models of Dubai International Airport, Abu Dhabi’s Sheikh Zayed Grand Mosque, the Dubai Creek and even a version of India’s Taj Mahal. One can even Siegfried Boerst walk down a Lego-version of Legoland Dubai high-rises towering over the dozen-lane Sheikh Zayed Road in Dubai, complete with a running metro line. At the center is a 58 ft.-tall replica of the Burj Khalifa, made of 439,000 Legos that took more than 5,000 hours to construct — complete with a skydiving Lego mini-figure. “It’s amazing. I’m an adult but I feel like a kid right now,’’ said Rajashree Vichare of Mumbai, India. “I want to play with every Lego toy right now.’’

“We designed Legoland specifically with the climate of the Middle East in mind. There’s shade all over the place, so people don’t need to be outside in the heat for a long time.’’

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

in Ohio, Indiana

Southeastern Equipment Co. Inc. announced that New Way refuse trucks and attachments are now available at its environmental division locations in Ohio and Indiana.

Southeastern Equipment Co. Inc. announced that New Way refuse trucks and attachments are now available at its environmental division locations in Ohio and Indiana. Quick delivery can be provided for the complete line, which includes front loaders, rear loaders, automated side loaders and satellite side loaders. “The line of New Way refuse equipment leads the industry in durability and reliability,” said Charlie Patterson, president of Southeastern Equipment. “These trucks have been engineered for easy maintenance and to reduce collection times. We are excited to offer options for both private companies and public agencies to streamline their operations.” New Way rear loading refuse trucks are available in five models. All come standard with rear-vision camera and a two-year cylinder warranty. Engineered to reduce wear on critical parts and components, the trucks also allow easy access to major service points to minimize downtime for routine maintenance and maximize productivity. The front loaders boast increased productivity with the ability to handle 10,000 lbs. (4,535 kg) of waste in two minutes or less with a 40 cu. yd. (30.6 cu m) hopper and singlepiece arm construction to empty a bin in two minutes or less. Side loaders can be operated by a single driver and are available in two styles. A line of satellite side loaders provides compact alternatives to service areas that can’t accommodate full-size trucks. New Way refuse trucks are available for immediate delivery, and are ideal for waste management companies or municipalities. For more information about Southeastern Equipment’s Environmental Division, call 740/255-5643. For more information about Southeastern Equipment Co. Inc., visit www.southeasternequip.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 23

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

JD 579

CAT 1029

DOZERS

EXCAVATORS

SKID LOADERS

2016 LBX 350X4, 3 hrs ......................................$CALL 2016 LBX 235X3LC, 6 hrs ....................................$CALL 2016 LBX 210X3EX, 2 units..................................$CALL 2016 LBX 145X3DZ, 2 units..................................$CALL 2016 LBX 145X3LC, 25 hrs ..................................$CALL 2016 KOB SK350LC, 2 units ................................ $CALL 2016 KOB SK260LC, 3 units ................................$CALL 2016 KOB ED160, 2 hrs ......................................$CALL 2016 KOB SK140SR, 2 units ................................$CALL 2016 KOB SK85CS-3E, 3 units ..........................$109,000 2016 SANY SY235CLR, 2 units ..........................$153,000 2015 LBX 160X3, 139 hrs ....................................$CALL 2015 LBX 145X3DZ, 188 hrs ................................$CALL 2015 KOB SK140SR, 2 units ............................$132,000 2015 KOB SK210LC-9, 11 units..........................$169,000 2014 SANY SY235C, 714 hrs ............................$135,000 2014 SANY SY215C, 504 hrs ............................$119,000 2013 KOB SK295LR, 1183 hrs ..........................$205,000 2013 KOB SK260LR, 1094 hrs ...........................$195,000 2013 SANY SY215C, 1470hr ..............................$96,500 2013 SANY SY135C, 660 hrs ..............................$82,000 2012 KOB SK210, 1511 hrs ..............................$117,500 2012 CAT 336EL, 4431 hrs ..............................$159,500 2012 KOB SK140SR, 960 hrs ............................$115,000 2012 KOMATSU PC138, 1778 hrs ........................$99,500 2012 SANY SY135C, 735 hrs ..............................$82,000 2006 KOB SK235SR, 4856 hrs ............................$75,000 2005 CAT 321C LCR, 5750 hrs ............................$59,000 2002 DEERE 270C, 9307 hrs ..............................$49,000 2001 HYUNDAI 180LC3, 4383 hrs ..........................$CALL 1988 DEERE 490D, 5121 hrs ..............................$34,500 1979 CAT 245, 2622 hrs....................................$25,000

2016 KUBOTA SLV90-2, 2 units ..........................$62,500 2015 CAT 289DXPS, 3 units ..............................$79,500 2014 DEERE 319E, 690 hrs .................................$CALL 2014 CAT 252B3, 350 hrs ..................................$32,500 2012 CAT 287C, 1194 hrs ................................ $47,500 2012 CAT 252B3, 6 units ..................................$32,500 2012 CAT 226B3, 975 hrs ..................................$24,000 2011 BOBCAT S185, 3760 hrs ..............................$CALL 2011 CAT 226B3, 530 hrs ..................................$28,000 1996 BOBCAT 751, 2026 hrs ..............................$15,500

2016 DEERE 700K LGP, 4 units..............................$CALL 2013 CAT D6K2 LGP, 2068 hrs ..........................$136,500 2013 DEERE 650K XLT, 2113 hrs..........................$89,000 2013 DEERE 550K XLT, 1561 hrs..........................$99,500 2013 CAT D6N LGP, 1300 hrs ................................$CALL 2012 CAT D6K LGP, 4482 hrs ..............................$99,500 2012 DEERE 850KWT, 1643 hrs ........................$210,000 2012 CASE 1650L WT, 2305 hrs ..........................$89,000 2011 CAT D7E, 1352 hrs ..................................$319,000 2011 CAT D6T XL, 2896 hrs ..............................$176,000 2011 CAT D6T LGP, 3120 hrs ............................$189,000 2011 CAT D3K XL, 667 hrs ................................$85,000 2011 CAT D3K LGP, 1000 hrs ..............................$66,500 2008 CAT D6T XW, 8081 hrs ............................$135,000 2007 CAT D8T, 5011 hrs ..................................$249,500 2007 CAT D6T XL, 3248 hrs ..............................$157,500 2006 CAT D6N XL, 7311 hrs ..............................$75,000 2006 CAT D6R XL, 7226 hrs..............................$129,500 2006 CAT D6R XWIII, 7200 hrs..............................$CALL 2006 CAT D6N LGP, 5338 hrs ................................$CALL 2004 CAT D6R XWII, 12995 hrs ..........................$85,000 2004 CAT D6N LGP, 10306 hrs ............................$79,500 2003 CAT D6R XL II, 9574 hrs ............................$87,000 2003 CAT D6R XW II, 11874 hrs ..........................$99,000 1997 CAT D5M, 4600 hrs ..................................$42,500 1973 CAT D6C, 3353 hrs ....................................$CALL

MINI EXCAVATORS 2016 LBX 80X3, 2 units ......................................$CALL 2016 KOB SK55SRX, 3 units ................................$CALL 2016 KOB SK35SR, 5 units ................................$50,000 2015 CAT 308ECR, 59 hrs..................................$99,000 2015 KOB SK55SRX, 280 hrs..............................$57,500 2015 KOB SK35SR, 5 units ................................$41,000 2014 CAT 308ECR, 1426 hrs ..............................$79,500 2014 KOB SK17SR, 2 units ................................$24,000 2014 SANY SY75C, 465 hrs................................$63,000 2013 KOB SK35SR, 494 hrs ..............................$38,000 2013 KOB SK27SR, 311 hrs ..............................$28,500 2013 CAT 308E CR, 93 hrs ................................$75,000 2012 SANY SY75, 2267 hrs ..................................$CALL 2012 KOB SK35SR, 124 hrs ..............................$37,500 2012 BOBCAT E50, 1033 hrs ..............................$49,500 2012 CAT 305ECR, 1306 hrs ..............................$51,000 2006 TEREX HR18, 3121 hrs ................................$CALL

KUBOTA 25

LOADERS 2016 CAT 926M, 3 units ......................................$CALL 2015 KAW 80Z7, 65 hrs ..................................$220,000 2015 KAW 70Z7, 13991 hrs ..............................$179,000 2015 KAW 67Z7, 263 hrs ................................$168,000 2015 CAT 926M, 165 hrs ................................$147,500 2014 CAT 924K, 263 hrs......................................$CALL 2014 KAW 80Z7, 525 hrs ................................$197,000 2014 KAW 80Z7, 1020 hrs................................$165,000 2014 DEERE 844K II, 1345 hrs ..............................$CALL 2014 CAT 908H2 ................................................CALL 2013 KAW 60ZV2, 2516 hrs................................$79,500 2013 CAT 930K, 1382 hrs ................................$115,000 2012 CAT 950K, 2 units ..................................$175,000 2012 CAT 950K, 8463 hrs......................................CALL 2012 DEERE 624K, 995 hrs ..............................$129,000 2012 DEERE 624K, 2 units ..............................$105,000 2012 VOLVO L50G, 3 units ................................$83,000 2011 CAT 908H, 2334 hrs .................................$49,000 2008 KAW 80ZV-2, 6953 hrs ................................$CALL 2008 DEERE 644J ..........................................$42,500 2007 KOMATSU WA250, 6285 hrs ........................$76,500 2006 KOMATSU WA250, 5522 hrs ........................$82,000 1999 CAT 980G, 28709 hrs ................................$69,000

COMPACTORS BACKHOES 2016 DEERE 410L, 36 hrs ....................................$CALL 2016 DEERE 310SL, 3 units..................................$CALL 2015 CAT 420F2, 2 units ..................................$99,000 2014 DEERE 310SK, 3 units ..............................$89,000 2012 NH B95C, 1093 hrs ..................................$56,500 2011 CASE 580 Super N, 1871 hrs ........................$CALL 2011 DEERE 310SJ, 2774 hrs ............................$64,500 2004 DEERE 310SG, 5377 hrs ............................$34,500

2016 BOMAG BW177D-5, 2 hrs ..........................$77,500 2015 DYNA CA2500PD, 0 hrs..............................$93,000 2015 DYNA CA2500D, 43 hrs..............................$89,000 2015 DYNA CA2500D, 170 hrs ............................$79,000 2015 BOMAG BW177D-5, 228 hrs ........................$69,500 2014 DYNA CA2500D, 283 hrs ............................$89,000 2010 BOM BW177PDH, 1618 hrs ........................$41,000 2007 IR SD116F, 1203 hrs ................................$78,000 2005 CAT CP433E, 3 units ................................$46,500 1998 HYPAC C850B, 205 hrs ..............................$19,500

Page 24 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NO HAZMAT. No Problem. MULTI-TANK TRAILER / The first fuel trailer exempt from the HAZMAT Materials endorsement. In some cases, a CDL is not required either.

/ Transport bulk capacities of diesel without a HAZMAT / Protect Tier 4 machinery with ISO Compliant DEF System / Add service options - such as light towers, workbenches or 3-in-1 welder/generator/air compressors - at any time.

ThunderCreek.com/noHAZMAT

Per the code of US Federal Regulations, Title 49 (CFR49). Local regulations may apply.

All-In-One Jobsite Service Solutions

800.744.0453 | ThunderCreek.com |

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 25

CONTACT 800-572-3267 www.adamsequipment.com Your Used Equipment Specialists Since 1957

#10124 CAT D7H HYDRAULIC SU DOZER W/TILT, 215HP, Diesel, Canopy, Powershift Transmission, Differential Steer, Very Good Undercarriage w/26" Pads............................................................$62,000

#9735 CAT D6R XL HYDRAULIC SU DOZER W/TILT, 175HP Diesel, Heat/AC, PS Transmission, Differential Steering, Fingertip Autoshift, Drawbar, Good Undercarriage w/30" Pads ................$78,500

#9789 CAT D6M XL HYDRAULIC 6-WAY DOZER, #10145 CAT D5G XL 6-WAY DOZER, 90HP, 140HP, Diesel, Canopy, PS Trans, FTC Steering, DB, Canopy, Hydrostatic Drive, Good Undercarriage w/ Excellent UC w/NEW Sealed & Lubricated Rail 20" Pads......................................................$38,500 Groups and 24" Pads..................................$52,500

#9862 CAT 12G TANDEM DRIVE ARTICULATED MOTOR GRADER, 135HP Diesel, Heat, Direct Drive PS, 12' MB w/ 2' Extension, Side Shift w/ Tip, Scarifier, Accumulators, Good Tires ..........$49,000

#10109 CAT 320DL 1.3 YD HYD EXCAVATOR, 148HP, Diesel, Cab w/Heat & AC, 9' 6" Stick, 24" Bucket w/Teeth, Very Good Undercarriage w/31" Pads..........................................................$104,500

#10171 CASE SV300 SKID LOADER, 84HP, 4 Cyl Dsl, Encl. Cab w/ Heat & AC, Aux Hyd, Hi Flow, Ride Ctl, Radio w/Aux for Phone, Hyd Disconnect, 2 Speed, Joystick Controls w/Pattern Changer, Block Heater, 84" GP Bkt, 12 x 16.5 Foam Filled Tires ......$31,500

#10122 CAT 279C MULTI-TERRAIN TRACK LOADER, 82HP, Dsl, Cab w/Heat & AC, 80" General Purpose Bkt w/Bolt on Edge, Auxiliary Hydraulics, Very Good Rubber Tracks ..........................$47,500

#10133 CAT D6M XL HYDRAULIC 6-WAY DOZER, #10150 CAT 953C 2.25 YARD CRAWLER LOADER, 140HP, Dsl, Heat/AC, Eng Encl, PS FTC Steering, 121HP, Diesel, GP Bucket with Teeth, Good DB, V. G. UC w/24" Pads, NEW Sprockets, S & L Undercarriage w/20" Pads ..........................$38,000 Rails, Rollers & Segments ........................$52,500

#10152 CAT 950G II 4.5 YD ARTICULATED 4WD WHEEL LOADER, 183HP, Dsl, Heat/AC, 4F-4R Powershift w/Variable Speed Control, GP Bucket w/Bolt on Edge ..........................................$57,500

#10132 CASE 95-XT SKID STEER LOADER, 74HP, Diesel, Canopy, Auxiliary, Hydraulics, 82" Hydraulic Coupler, Bucket w/Bolt on Edge, Good 33 x 15.5 x 16.5 Tires....................................................$16,500

#10165 LE ROI 185 PORTABLE AIR COMPRESSOR, #10173 I. R. PROPAC SD70F 66" VIBRATORY Deere 4 Cylinder Diesel ................................$5,250 ARTICULATING PADFOOT COMPACTOR, 95HP, Dsl, Hydrostatic Drive, Good Tires, 30,450 lbs., Centrifugal Force ....................................$25,500

#10160 INGERSOLL RAND SD100D 84" SINGLE SMOOTH DRUM ARTICULATED VIBRATORY COMPACTOR, Diesel, Hydrostatic Drive, Canopy, 58000 Centrifugal Force, Good 23.1 x 6 Diamond Thread Tire..............................................................$44,000

#9937 CAT 416C 1-YD 4X4 LOADER BACKHOE, 75HP, Dsl, Cab w/Heat, Powershuttle Trans, 2 Lever Controls, GP Loader Bucket, 24" Hoe Bucket w/Teeth, NEW Tires ....................................$31,000

For our full inventory, please visit www.adamsequipment.com

Page 26 â€˘ December 3, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

2017 summit & condex January 10-13, 2017 | Chicago, IL | Hyatt Regency Chicago

Focus on Your Dealership and Maximize your Business Opportunities

Summit Keynote Presentations

New 2017 Summit, AED is AED featuring professional dealer education on Newtotoourour 2017 Summit, is featuring professional dealer Tuesday, January 10th.on Tuesday, January 10 - Thursday, January 12! education sessions AED wants to provide a convenient program for attendees to grow AED wants to skills provide a convenient program for attendees to grow and and develop unique to the construction equipment industry. develop skills unique to the construction equipment industry. With each With each session, there are tremendous opportunities to expand session, there are tremendous opportunities to expand on existing on existing knowledge while learning new, valuable information to knowledge while learning new, valuable information to take back to take back to your dealership. your dealership.

Visit www.aedsummit.com to view all of the on-site educational options available and to register for the 2017 Summit.

Dick Cheney

Former U.S. Vice President & Secretary of Defense

Daymond John Founder & CEO of FUBU and Investor on ABCâ€™s Shark Tank

Richard Picciotto FDNY Chief & Highest 5DQNLQJ )LUHÍ¤JKWHU WR Survive the World Trade Center Collapse

60TH ANNIVERSARY SPECIAL! $71,500 THROUGH THE END OF THE YEAR

Signature Series 503-554 SS SF *HYDRAULIC DETACHABLE GOOSENECK

6KRZQ ZLWK RSWLRQDO 13 HP Honda Motor

Standard Features: 12â€™-9â€? Gooseneck with 86â€? & 110â€? Swing Clearance Angled front sill on gooseneck Full width frame jack Âľ +HDY\ 'XW\ )URQW Ă LS UDPSV Âľ +HDY\ 'XW\ )URQW Ă LS UDPSV ))XOO\ ER[HG EHDPV DW IURQW DSSURDFK XOO\ ER[HG EHDPV DW IURQW DSSURDFK 5 DWFKHW GHVLJQ IRU PXOWLSOH ULGH KHLJKW DGMXVWPHQW 5DWFKHW GHVLJQ IRU PXOWLSOH ULGH KHLJKW DGMXVWPHQW Âľ 3LHUFHG VWHHO SODWH LQ IURQW GHFN IRU FKDLQ ELQGHU VWRUDJH Âľ 3LHUFHG VWHHO SODWH LQ IURQW GHFN IRU FKDLQ ELQGHU VWRUDJH Stub In cross members in outer bay Âľ $SLWRQJ GHFNLQJ Âľ $SLWRQJ GHFNLQJ 3DLU FKDLQ VORWV LQ RXWHU Ă DQJHV 3DLU FKDLQ VORWV LQ RXWHU Ă DQJHV ))XOO GHSWK RXW ULJJHUV XOO GHSWK RXW ULJJHUV

%HQW ' 5LQJV SHU VLGH %HQW ' 5LQJV SHU VLGH : LGH /RDG 3DFNDJH WR VXSSRUW 2 6 ZHEV :LGH /RDG 3DFNDJH WR VXSSRUW 2 6 ZHEV Lowered cross members in last 8â€™ Manual +3/-3 Valve 27,500 lb. Axles Firestone 255/70R22.5 16 Ply 3rd Axle Lift 3rd Tail Light Pkg. w/Rear Strobes 3 Position Manual Raise & Lower Valve Air & Electric for 4th Axle WK $[OH &DSDEOH DV $[OH RU WK $[OH &DSDEOH DV $[OH RU

Load King is celebrating this milestone by offering industryZ ZLGH VSHFLDOV RQ LWV PRVW SRSXODU PRGHOV LQFOXGLQJ WKH LGH VSHFLDOV RQ LWV PRVW SRSXODU PRGHOV LQFOXGLQJ WKH newly redesigned Detachable Gooseneck 503/554 SS SF model, which Load King will offer with standard attachments for $71,500 until the end of the year. For P PRUH LQIRUPDWLRQ RQ WKH DQQLYHUVDU\ VSHFLDO DQG IXOO RUH LQIRUPDWLRQ RQ WKH DQQLYHUVDU\ VSHFLDO DQG IXOO VVSHFLĂ€FDWLRQV RQ WKH QHZ WUDLOHU GHVLJQV YLVLW /RDG .LQJ SHFLĂ€FDWLRQV RQ WKH QHZ WUDLOHU GHVLJQV YLVLW /RDG .LQJ Trailerâ€™s website or contact your local Load King dealer. (888) 264-5522 www.loadkingtrailers.com 701 East Rose Street Elk Point, South Dakota, 57025

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 27

MAXIMIZE MA XIMIZE

YOUR YOUR PRODUCTIVITY

info@dressta.com www.dressta.com www .dressta.com ENGINEERED FOR Mining | Road & Highway | Construction | F Forestry orestry | Landfill

TD TD-8 -8

TD-9 TD-9

TD-10 TD-10

TD -14 TD-14

TD-15 TD-15

TD-20 TD-20

TD TD-25 -25

TD-40 TD-40

Page 28 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

STACKING UP.

048 months %

APR for

rebates up to $5,300 USD* on select Bobcat® skid-steer loaders

PLUS, $2,600 USD*

Randy Klug

Nortrax Names Klug as Territory Sales Manager

Minnesota M innesotta Bobcat of Bemidji Bemidji Tri-State Bobcat Burnsville Farm-Rite Equipment, Inc. Dassel

Little Canada

St. Cloud N North ortth D Dakota akota

Bobcat of Williston Williston

Swanston Equipment Co. Minot

Willmar Bobcat of Devils Lake Devils Lake Wisconsin W isconssin Lano Equipment, Inc. Corcoran

Bobcat of Fargo Fargo

Tri-State Bobcat Hudson

Ramsey

Shakopee

Bobcat of Grand Forks Grand Forks

Visit Bobcat.com/Offers or stop by today for details. *Limited time offer. Available at participating and eligible dealers only. Offer may vary by product type, series, model and select units in dealer inventory. Offer available on new equipment in US and Canada only. Some restrictions apply. Length of contract may vary. Prior purchases not eligible. See dealer for details. Financing provided on approval of credit by authorized Bobcat finance providers to well-qualified buyers. Administrative fees may apply. Offer not available to government accounts, national accounts and municipal/utility bid customers. Non-commercial customers may not be eligible for low rate financing. Bobcat Company reserves the right to extend or discontinue any of these programs at any time without prior notice. he B Bobcat obcat llogo ogo aand nd tthe he colors colors ooff tthe he B Bobcat obcat machine machine aare re rregistered egistered ttrademarks rademarks ooff B Bobcat obcat C Company ompany iin n tthe he U United nited S States tates aand nd vvarious arious oother ther ccountries. ountries. 116-B358 6 -B 3 5 8 B obcat ®, tthe Bobcat

Nortrax announced the addition of Randy Klug to its sales team in the Merrill, Wis., area. He will be responsible for heavy equipment and forestry new and used machine sales as well as providing customers with their product support needs. Klug has years of sales and management experience and recently worked as a territory manager of Sunbelt Rentals. He also served as a sales manager for Londerville Steel in Wausau, Wis., and has experience as a certified welder and fabricator. Klug said it is an exciting time to be at Nortrax for a number of reasons. “There are tremendous opportunities within the company, including the new Nortrax Merrill facility opening in spring of 2017, and the overall strength of the John Deere brand with many new machines and technologies,” said Klug. “In an effort to better serve our customers’ equipment needs in the Merrill area, we are pleased to welcome Randy as another member of our sales team. He brings enthusiasm, as well as sales and technical skills. We expect him to have an excellent impact here on our customer base around the new Merrill store,” said Matt Hanson, Nortrax general manager. Nortrax Inc., a John Deere company, operates John Deere construction and forestry dealerships throughout the United States and Canada. Based in Tampa, Fla., the company supports the construction, forestry, commercial worksite and mining markets in eastern Canada, as well as the Midwest, Northeast and Southeast regions of the United States. Nortrax specializes in the sales, service and support of John Deere construction and forestry machines through the new, used and rental channels. For more information, visit www.nortrax.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 29

IF IT’S NEW, IT’S HERE.

THE TECH EXPERIENCE New at CONEXPO-CON/AGG 2017 Be among the first to visit the new exhibit that lets you experience tomorrow’s construction world: 75,000-square-foot immersive experience Emerging technologies like wearables and new material The future of your job, worksite and industry

March 7-11, 2017 | Las Vegas Convention Center | Las Vegas, USA

Co-located with

Page 30 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

563-872-4112

(DUBUQUE) BELLEVUE, ELLEVUE, IOWA

WWW.JJSCHECKEL.COM

CLEAN, WORK-READY EQUIPMENT IN IOWA - WE OWN WHAT WE ADVERTISE! RENTOR

BUY!

RENTOR

BUY!

2011 KPI FT4250CC - $325,000 ‘07 SMI 4043T CRUSHER - $215,000 2007 SMI 516T SPYDER 2009 CAT D10T - $245,000 2007 CAT AT D10T - $295,000 YDER - $150,000 RJG bl d w/ ttwin RJG SSeries, eries, EErops, rops p , U blade win tilt, tiltl , Single Single gl shank l like like RJG Hrs, Mobile b l track, trackk, 600 TPH, 3 way way screen. screen. Belts Belts Mobile TTrack rack Moun Mounted ted Impac Impact p t CCrusher, rusherr, 4,730 Hrs Hrs,, RJG series, series, Low Low hour ccomponent omponen p t history, history, Erops, Erops p, Mobile Track Track Mounted Mounted Impac Impact p t CCrusher, rusherr, 4,900 Hrs Hrs,, 2,800 Hrs, ripper, track ripper pp r,, NNew ew tr ackk gr ggroups. oups p . Service Service records records available d available. il bl . paint. new w, Original Original g pain p t. Easy Easy life life as topsoil topsoil p il screen. screen. Remote Remote Single Radio d remote ripper, d w// twin Very good, 500 TPH, Closed Closed circuit, circuit, Radio remote control. control. Single g shank ripper pp r,, U Blade Blade twin tilt, tilt, Very good, f b h . Remot Remotee CControl. 300 TPH, CCompletely ompletely rrefurbished. efurbished ontrol. new, spentt in 20122 ffor 84k spen or ccomplete omplete rebuild rebuild by by CAT CAT dealer. dealerr.. Buy. control, HHyd yd ffoldable oldable ld cconveyers. onveyers. RRent/Lease ent/L /Lease or Buy y.. clean Side Side stacker stacker & magnet options. options. Rent/Lease Rent/Lease or Buy. Buy. Side l condition. condition. d FFrom rom reputable reputable original owner. owner. $584k stacker options.. RRent/Lease Buy.. control, Side stack er & magnet options ent/Lease or Buy

RENTOORR

BUY!

RENTOORR

BUY!

1996 CAT D9R - $225,000 2009 CAT D8T - $235,000 2014 CAT D6T XW VPAT - $285,000 2006 CAT D10T - $245 $245,000 5,000 2008 CAT D9T - $265,000 LLow ow hhour ccomponents, omponen p ts, EErops, rops p , U bl d w/ ttwin win tilt, tilt, 15,000 FFrame blade ull Scraper Scraper p Tractor, Tractorr, 7TL 7T series, series, 0 hour engine. engine g . 8,300 Hrs Hrs,, 2,800 at at idle idle.. EErops, rops, A/C, SU BBlade, lade, Multi- Only Onlyy 906 original g hours hours,, 302 aatt idle idle.. EErops, rops p , A/C, HHeat, eat, hours,, ZZero engine drives. rame hours ero hour en ngine g & final driv es. D9R PPull Single Single g shank ripper ripper, ipp r,, VVery ery good g d undercarriage. undercarrriage g . 1 Owner, Ownerr, Under igged gg ttoo newly ly cconverted/rebuilt onverted/rebuilt 631 ppullll scraper, scraper p r,, shank ripper, ripper pp r,, Excellent Excellent UC. Service Service history history since since new. new. GPS rready, eady dyy,, DDiff iffff st steer, eer err, 6-way 6-way PA PPAT AT blade, blade, As As close to to new Undercarriage likee new new,, Rebuilt carriage g lik R b l bblade, llade d , RRippers ippers pp aavail. vail. RRigged FFull ullll ser service vici e hi history. history. $354k 54k spen spentt iin rrebuilds ebu builds ild last l 3 yrs. yrs. priced edd separ separately. ately l . Excellent Ex E cellent UC. C. Ex Extra tra clean. l Ready R d to to go. go. CCleanest l leanest D8T D8 on the market. m et. Rent/Lease mark Rent/Lease or Buy. Buy. as you you will find! SSuper uper clean. Rent/Lease Rent/Lease or Buy. Buy. straight machine.. RRent/Lease Buy. CClean lean & str aigh i ht machine ent/Lease or Buy B . pric

RENTOORR RENTOR

RENTOR

BUY!

2012 CAT D6T XW - $265,000 2011 CAT D6T LGP - $110,000 OOnly nlyy 943 original g hours hours,, 139 aatt idle idle.. EErops, rops op , A/C, HHeat, eat, OOnly nlyy 4,080 hours hours,, 700 idle idle.. EErops, rops p , A/C, HHeat, eat, DDiff iff st steer, eerr, tilt, Excellent Excellent UC, DDiff iffff st steer, eerr, SU blade, blade bl d , SSweeps, weeps p , Rear scr screen, een,, Rear R dr drawbar. awbar. GPS rready. eady dy. SStraight traigh g t blade w// titilt, drawbar. AAss close ttoo new as you you willll find! RRent/Lease ent/Lease or Buy Buy.. ounterweight drawbar. SStraight traighht machine machine.. Rear R ccounterweight OR OR

RENT

BUY!

2003 CAT D6R LGP - $65,000 LLocal ocal tr ade in, DDiff iff steer, steerr, A/C, Good Good UC, Erops. Erops p. trade 11,300 HHours, ours, 3,300 aatt idle. idle. Original Original g condition, condition, original pain l d w// tilt. tilt. paint.t. SStraight traight blade

BUY!

2012 CAT 740B - $215 $215,000 5,000 7,700 ffrframe ame hhours; 1,650 aatt idle. idle dl . FFully ullllyy lloaded loaded, d , A/C, TTailgate, ailga g te, 4 NNew ew RRadial adial tir tires. es. W Well ellll main maintained i tained i truck, tr uckk, ready ready to to go go.. RRent/Lease ent/Lease or Buy Buy..

2012 CAT 336EL - $185,000 2012 CAT D6N LGP - $160,000 $160,000 3,800 Hours, Hours, GPS Accugrade Accugr grade ready. readyy. Erops, Erops p , Sweeps, Sweeps, A/C, 2,900 Hrs, Hrs, Fully Fullyy loaded loaded, aded, 13’ stick stick,, AAuxilliary uxilliary Hy Hydraulics ydraulics steer, DDiff iff st eerr, AAux ux hydraulics, hydraulic at SSystem yystem 1 w/ w lics, Rear drawbar, ddrawbar b r, CCat work ork ttool ooll control controll program, pprogr g am, Pattern Pattern changer. changer g . NNew ew UC, 1 OOwner, wnerr, Excellent Excellent condition. condition. Rent/Lease Rent/Lease or Buy. Buyy.. 48”” buck bucket. et. Deluxe Deluxe cab. cabb. RRent/Lease ent/LLease or Buy Buy..

RENT

BUY!

2013 CAT 329EL - $168 $168,000 8,000 , 2012 CAT 320EL - $ $142,000 1994 CAT 992D D - $470,000 , 3,800 Hrs Hrs,, FFully ully lly loaded lloaded, d d, 10’6”” stick stick, k, HHydraulic yddraulic l qquick 2,200 Hours, Hours, 46”” buck bbucket, ket, 9’6”” stick stick, sti ckk, A/C, rrear ear view Fullyy refurbished, Fully refurbished f b h d, $$352,0000 w work orkk order ordder just j spent. spen p t. ccoupler, oupler p r,, Auxiliary Auxiliar Longg and annd wide camera, AAux ux hhydraulics ydraulics available, Very nic hour main ccomponents. ompp omponen ts. New tiri es!! ili y hydraulics, hyddraulics, Long id UC. UC camera, available, Very nicee machine, machine, 2,000 2 New tires! 42”” bbuck bucket. ket. 1 Owner, Ownerr, very very clean. Rent/Lease Rent/L /LLease or BBuy Buy.. Fully Fully serviced, serviced, Ex Excellent cellent condition. condition. Rent/Lease Rent/L /Lease or Buy. Buy. Call Call for for ddoc documents. uments.

RENTOR

BUY!

RENTOR

BUY!

RENTOR

BUY!

(2)2012 ) CAT 740B’s - $ $188,000 EA. (2)2006 CAT 740’ss - $128,000 EA. B1P B P Series. Series. All All 3 bought bough gghht new together. together g h . 9-10,000 ffrframe ame hhours; 3,000 aatt id d . OOriginal dle dl riginal g l pain idle. paint,t, FFull ull ser service vice hist history, ory,y, GGood oodd rrubber. ubber.. FFully ully lly loaded loaded.. FFully ullyy loaded adial tir es. SSuper uper p loaded,, A/C, 90% RRadial tires. SSolid olid machines, machines, ready ready d to to go. go. Rent/Lease Rent/LLease or Buy. Buy B . clean tr ucks k rready eady ttoo go ent/Lease or Buy B . trucks go.. RRent/Lease Buy.

J.J. SCHECKEL RENTS 1/3/6 Mo Co Contracts. ontracts. Re Rent/Purchase nt/Purrchase Options.

2012 CAT 980K - $210,000 2012 CAT 980K - $155,000 8,219 hours, hours, 2,364 Idle. Idle. Matching Matchingg Goodyear Goodyyear rubber. rubber.. 13,500 frframe ame hours hours,, 4,200 w were ere IIdle. dle. Ma Matching tchingg TTitan itan 7 Yard Yard straight straight g t edge g bucket b et w// teeth. buck teeth. h TA2 TA2 A Tested. Tested. LD250 tires. tires. 7 Yard Yard GP str straight aigh g t edge buck bucket. et. TTA2 AA2 ttested. ested. Original Originall paint. paint. Priced Priced wholesale! OOriginal riginal pain paint,t, originall oowner. wner. Clean Clean l and str straight. aight.

(2)2008 ) CAT 627G 27G - $255,000 Ea. Push/Pull, Push/P h ullll, 100% NNew ew w Rubber Rubber, bb r,, 9-11,000 hhrs withh lots of idle time recorded, recorded, original paint, paint, super clean units,, $255,000 each. units ch. h Rent/Lease Rent/Lease or Buy

RENTOR

BUY!

2013 CAT AT CP56B - $89,000 84”” VVibratory ibr b atory ppa pad add ffoot. oot. 2,460 hours hours,, FFront ront bl blade option, OOriginal riginal g l paint. ppain i t. Very Very well well main maintained. tained. Fully Fully ser serviced vici edd andd rready e d ttoo go eady go.. RRent/Lease ent/Lease or Buy. Buy.

VISIT OUR WEBSITE FOR DETAILED PHOTOS DESCRIPTIONS! AND DESCRIPTIO ONS! WWW.JJSCHECKEL.COM WWW.JJSCHE ECKEL.COM

Ph: 563-872-4112 | Fax: 563-872-5058 | sales@jjscheckel.com sales@jjscheck s el.com | 21582 Hwy 62,, Bellevue, Bellevue, Iowa Iowa 52031 | www.jjscheckel.com www w w.jjscheck .jjscheckel.com

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ December 3, 2016 â€¢ Page 31

I NAVAILABLE STOCK! NOW Visit our web site at EagerBeaverTrailers.com

and you're a "click" away from getting all the information you need from our nearest dealer.

PAYMENTS AVAILABLE AS LOW AS:

20 XPT

s #!0!#)49 LBS

$ * * per month (60 months)

20 XPT / Hydraulic Ramps $ s #!0!#)49 LBS

* per month (60 months)

25 XPL / Lift Front Axle $ s #!0!#)49 LBS

* per month (60 months)

* 0AYMENT DOES NOT INCLUDE &REIGHT AND 4AXES

SAVE TAX $$$

ANNIVERSARY

Part 1. "Section 179 Expensing" Write Off 100% of Trailer/Equipment Expense up to $500,000 *Please consult your tax adviser

For a quote on any model, please call 800-257-8163

1946-2016 >> EagerBeaverTrailers.com

Page 32 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

North Star Solar to Contribute $350K Annually in Taxes SOLAR from page 18

Due to Minnesota’s chilly climate, the company crafted a specific solution to work for the site and region. “Solar is viable in colder, snowy climates, and we have the technology in both software and hardware to overcome some of the challenges that colder weather climates and regions face, said Booth. “With the rise of more Midwest and Northeast solar projects coming online and favorable renewable energy policies in particular Midwest states, we have long had a cold weather solution on our product roadmap. “As the Midwest continues to expand its solar footprint, the North Star solar power facility serves as a model for the region in both record-breaking size, and its unique wired control system design. This cold weather tracking solution has been replicated on other solar projects in New York, Vermont, Minnesota and in multiple community solar projects in Wisconsin.” To make the project a reality, Swinerton Renewable Energy teamed with various partners, including Community Energy Solar. Chase Whitney, Community Energy spokesman said, “Community Energy proposed the North Star Solar Project to Northern States Power/Xcel in response to their solar energy request for proposals in June 2014. After the project was selected from more than 100 solar project proposals, Community Energy led development and permitting of the project until construction began in April 2016. “The challenges of project development are generally pretty consistent. Land acquisition, interconnection and permitting are usually the biggest hurdles. North Star benefited from a receptive community, helpful landowners, a strong point of interconnection and a site that was largely free of environmental constraints.” Whitney said it’s been gratifying to be a part of the effort. According to Bruce Messelt, administrator of Chisago County, renewable energy, and solar power in particular, is now an affordable nationally-available technology.

“At 100Mgw, North Star Solar represents a major step forward in expanding and diversifying our energy resources and production in the Midwest. This type of development now means that solar power has transitioned from a novel, boutique technology to one that is providing baseline electricity production for thousands of homes and businesses. “The project is also significant because of the complexity of assembling some 1,000 acres for development, spanning scores of landowners, three local units of government and a state-led regulatory process, as well as intersected by several major roadways and utility corridors. From developer to regulator to contractor to owner/operator to host community, this project demonstrated that amazing synergy of common purpose and vision, leading to an astounding six- month timeline from permitting to completion and commissioning.” Upon completion, North Star Solar will be contributing some $350,000 annually in production and property taxes to local schools, cities and county. Additionally, officials anticipate a small number of high-paying, full-time jobs associated with operating and maintaining the facility. “For many, the size of this project is only understood from an aerial photograph. North Star Solar utilizes unique landscaping, ecological-friendly fencing and retained wetlands and homesteads to fully blend in to the larger rural Minnesota environs,” said Messelt. “What you cannot see are key project elements, such as large woven-wire agricultural fencing to allow small animals uninterrupted habitat, and hundreds of acres of restored native vegetation and pollinator-friendly plantings. In many ways, the North Star Project represents an improvement in land stewardship, from intensive farming of marginal soils to an ecofriendly use of native land for an industrial purpose.” Messelt said that the Chisago County community has been largely supportive of the project. He also said that Chisago County has been a regional leader in seeking to be 100 percent renewable energy efficient by 2025.

“Unlike past community conflicts over large industrial developments, a proactive approach to communicating this project’s vision and a transparent review and permitting process did much to address, up front, the most legitimate questions and concerns.” “Chisago County has been fortunate to place itself in a position to benefit from federal and state incentives to promote solar energy production. Our natural assets of affordable and accessible land, proximity to the electrical transmission/distribution grid, and a welcoming green-friendly community were well-matched with proactive partners. Our state and county leaders had the foresight to put in place a balanced regulatory environment which promotes solar energy development while protecting Minnesota’s natural beauty and resources.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Swinerton Renewable Energy photo

“Physical construction of the site was the most critical aspect of the build, since the site needed to be completed and tested prior to winter weather affecting irradiance levels,” said Brian Hoopes, Swinerton project manager.

Swinerton Renewable Energy photo

North Star Solar will generate 100 megawatts of electricity and is a $180 million investment in Minnesota and Chisago County.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 33

JCB Expands North American Dealer Network AgPro Equipment Services Inc., headquartered in Hettinger, N.D., joins JCB’s North American dealer network as AgPro JCB. The dealership now offers JCB’s agricultural equipment, including high-speed Fastracs, telehandlers and skid steers and compact track loaders with side-entry doors and a single-arm PowerBoom. Founded in 2007, AgPro Equipment is an independently owned and operated business offering a wide range of agricultural services to individual farmers, ranchers and equipment dealers. In addition to a full line of diverse agricultural equipment, AgPro Equipment features a full service department for equipment maintenance and repair as well as competitive financing and leasing opportunities. The dealership also offers agricultural, industrial, heavy-duty truck and automobile parts through many suppliers and distributors and has a fully authorized NAPA auto, truck and ag parts store. “We started AgPro Equipment in 2007 with just $3,000 on a credit card and no revenue,” said Jeff Hallen, president and owner of AgPro JCB. “With the recent opening of a second dealership location in Washburn, North Dakota, and now the addition of JCB’s excellent line of agricultural equipment, we are excited to continue to expand and look forward to seeing what the future will bring for our company.”

ALL M AK E S.

“We started AgPro Equipment in 2007 with just $3,000 on a credit card and no revenue.” Jeff Hallen AgPro JCB

In addition to offering JCB equipment, AgPro JCB has adopted JCB’s overall look and brand at its Hettinger location. The dealership will be utilizing advertising and marketing materials to further communicate the availability of JCB equipment within central and southwestern North Dakota. “In less than a decade, the company has managed to create an outstanding business and a network of customers who know they can rely on AgPro Equipment’s products and services to meet their agricultural needs,” said Richard FoxMarrs, JCB North America’s president of agriculture. “We’re excited to be a part of the company’s growth and look forward to working together for a successful future.” For more information about AgPro Equipment, visit www.agproequip.com. For more information about JCB, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

ILLUMINATE

CALCUL ATE

INSUL ATTE

E AR THFORCE M AGNE TIC LIGHT

E AR THFORCE WEIGHLOG 100

E AR THFORCE FILTER HE ATER

E AR THFORCE® REPL ACEMENT PAR T S bring r eliable per formance and superior value — no mat ter what make of compac t equipment you choose. PL US — tire s, tracks, bris tle s, alternator s, s tar ter s, turbos and bucket teeth for all make s and models. C h e c k o u t t h e f ull lin e up o f p r o du c t s f o r y o ur machine at E A R TH- FORCE .C OM/P OW E RF UL E ARTHFORCE is a trademark of Clark Equipment Company.

| P154AR

Page 34 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

To See More Machines, Please visit us online at www.bobcat-ent.com Call Brad Kent at 513-266-7761 or on our USED EQUIPMENT HOTLINE: 888.BOBCATS

2014 S650 Bobcat Loader, 1675 Hrs, Cab Heat & Air, Power 2014 S750 Bobcat Loader, Only 200 Hrs, Open ROPS, New 2009 5600 Bobcat Toolcat, 1325 Hrs, Cab, Heat & Air, CN 99863..........................................................................$29,500 Quick Tatch, CN 91813 ..................................................$37,500 Tires, CN 99481 ..............................................................$44,000

2007 T180 Bobcat Track Loader, 3000 Hrs, Cab Heat & Air, Wide Track, CN 100631 ..................................................$24,500

2014 Bobcat T750 Track Loader, 2115 Hrs, Cab Heat & Air, 2012 DL220 Doosan Wheel Loader, 600 Hrs, CN 84785 .......... 2014 DA30 Doosan Articulated Truck, 500 Hrs, CN 90330...... High Flow, 2 Spd, Joysticks, CN 100642......................$49,500 ........................................................................................$123,500 ........................................................................................$328,800

2014 DX420LC-3 Doosan Excavator, 850 Hrs, CN 90363 ........ ........................................................................................$258,880

PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE! Parts • Sales • Service • Rental • Training Cincinnati • Mt. Orab • Hilliard • Reynoldsburg • Lexington • Louisville

2006 Case 550HLT 3A Dozer, 3113 Hrs, Stk# P10549 $45,000

Case 580L, 7372 Hrs, OROPS, 4 Stick Controls, stk# P09579 $19,700

2012 Case 580SNWT4A, 1471 Hrs, Cab Heat/Air, Wide Track 4WD Extendahoe, Stk# P05286 $88,500

2012 Case SR175, 1335 Hrs, OROPS, H Pattern Controls, Stk# P07497 $28,700

Case 70XT SSL, 2700 Hrs, OROPS, H Pattern Pilot Controls, Stk# P09546 $22,700

2007 Case Construction 580SM III, 3944 Hrs, Stk# P06371 $47,700

Case TR270 CTL, 478 Hrs, Tier 4 Final, 72” Bkt, Cab w/Heat & A/C, Stk# P09381 $44,700

2012 Case TR320HF CTL, 950 Hrs, High Flow Plus Auxiliary Hydraulics, Stk#P04571 $54,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 35

Genuine quality, no compromise Tried, tested and proven protection for your engine You want to give your engine the best possible protection. 6US` 7LYRPUZ ÄS[LYZ HYL KLZPNULK HUK KL]LSVWLK [V TLL[ 7LYRPUZ L_HJ[ LUNPUL ZWLJPÄJH[PVUZ [OLU YPNVYV\ZS` [LZ[LK PU YLHS SPML JVUKP[PVUZ [V LUZ\YL SVUN SHZ[PUN WLYMVYTHUJL :V ^O` JVTWYVTPZL& *OVVZL 7LYRPUZ ÄS[LYZ L]LY` [PTL

www.perkins.com

Page 36 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

STOPS FUEL GELLING NEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wraps around the filter housing and reduces or eliminates the possibility of cold weather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternating current or a convertible model combining dc and ac. A standard 12V or 24V Universal Fuel Filter Preheater is priced at $138. The ‘peel & stick’ Universal Preheater attaches to the bottom or the side of the oil pan and converts the housing into a heat transfer element. It warms the oil without burning it making cold starts easy. It can be used on gearboxes, transmissions, transfer cases, water tanks and even bulk oil tanks. The Preheater plugs into any 120 or 240 volt outlet and consists of a thin silicone fiberglass pad containing a metal grid. To install it, you clean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone to seal the edges of the pad and place a flexible ceramic insulation pad over it. It is available in several models depending on the lube capacity. A 50 watt unit sells for $44 and a 350 watt unit sells for $133. BULK FUEL STORAGE FILTER HEATER The newest Diesel Fuel Filter Preheater fits 3.5" to 4" diameter by 7" to 10" tall filters. Stops diesel gelling in the filter so that fueling equipment can proceed even in the coldest temperatures. 120v with thermostat. $225.

PO Box 83, North Aurora, IL 60542-0083

800-530-5064 Local: 630-966-8992 Fax: 630-801-9569 sales@etipinc.com • www.etipinc.com universalpreheater.etipinc.com (Veteran Owned Small Business)

Vario-Superlift Helps Sterett With Wastewater Plant Lifts STERETT from page 10

the lid was lifted to a height of approximately 20 ft. (6.1 m). “At the beginning of the lift, the CC2400-1 crane’s Superlift tray was positioned at its maximum 49.2-foot radius,” said Laidler. Initially, the load was picked over the toes of the crawlers, and it was walked forward approximately 15 ft (4.6 m). The crane then rotated the lid to position it over concrete blocks that served as the platform for refurbishment. “As we swung the crane, we transitioned the Superlift tray’s radius from 49.2 to 36 feet to pass by the tank at the rear of the crane,” said Crisp. “After passing the obstruction, we extended the counterweight tray back to a 49.2-foot radius to set the lid on the blocks. All this was done while under load without removing any counterweight.” Crisp also recalls one particularly challenging lid lift, where the tank was nearby an underground tunnel, making the area sensitive to ground pressures. “The crane was positioned about 20 ft. from the tunnel, but the tray was sitting next to the tunnel once we swung the load to its final resting place,”

he said. Extra bracing was added to the tunnel to keep the ground contact pressure within the permissible limits. Fortunately, the Terex CC 2400-1 crawler crane comes standard with the IC-1 control system that can calculate the distribution of the ground pressure along both track carriers and gives an estimation of the acting ground pressure. “It was definitely a learning experience with how much weight was gained or lost by shifting the weight in and out at radius,” said Crisp. With an experienced crew of five Sterett members and five laborers from Bowen, the Evansville WWTP digester tank refurbishment project went off as planned, on schedule and within budget, despite the many challenges along the way. “Using the VarioSuperlift tray was the only way to do the first half of the job,” said Crisp. “The CC 2400-1 crane gave us the competitive edge we needed to get the job and the flexibility to complete the job as planned.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ December 3, 2016 â€¢ Page 37

BACKHOE LOADERS Deere 310SE, 1998, 9043 hrs, 3ZU VKLIW WUDQV [ w ENW H[W KRH WLUHV ...... $21,900 Deere 310SJ, 2008, 2927 hrs, &DE Z R DLU [ SZU VKLIW WUDQV H[W GLSSHU w EN .... $44,500 Deere 410E, 1998, 6895 hrs, Cab w/o air, 4.4 pwr shift trans, ext dipper, frnt cplr ..... $27,500 Deere 410E, 2000, 10050 hrs, [ ULGH FQWUO DX[ K\GU w ENW H[W KRH ............... $22,900 Deere 410G, 2001, 3758 hrs, Turbo, 4x4 pwr shift trans, aux hyd, ext. hoe, bkt ....... $34,900 Deere 410G, 2002, 5285 hrs, 7XUER [ SZU VKLIW WUDQV TFN FSOU w ENWV ............ $36,900 Deere 410G, 2005, 4622 hrs, AC, pilot cntrls, ext hoe, 4x4 pwr shift trans, qwk cplr ... $37,500 Deere 410G, 2006, 4878 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext dipper .......... $37,500 Deere 410K, 2014, 396 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext dipper............. $92,900 Deere 410K, 2015, 494 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext. dipper ..........$105,000

CRAWLER DOZERS Cat D6M XL, 2000, 7001 hrs 5236 H[WUD ORQJ WUDFN w SDGV ........................ $47,000 Cat D7H, 1990, 30593 hrs /YU 6WHHU /QJ 7UFN &RYWU 7UDQV w SDGV 6HPL-U Bld ..... $42,500

SAVE TIME â€¢ SAVE MONEY SAVE LABOR â€¢ SAVE OIL â€¢ No tools required â€¢ No expensive hardware needed â€¢ No more rags stuffed into hoses â€¢ No more messy plastic caps â€¢ The ultimate contamination control tool â€¢ One hand installation â€¢ Eliminate hydraulic oil spills & clean up â€¢ Quick installation & ease of usage â€¢ Safe for personnel & environment â€¢ Industry acclaimed â€¢ 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

EXCAVATORS Deere 200C LC, 2005, 10170 hrs AC, lng arm; std boom; lng trck, aux hyd, cplr ... $57,500 Deere 290G LC, 2011, 2432 hrs $& FSOU DX[ K\U w ENWV ................. $172,900 Deere 350D, 2008, 8117 hrs AC, med lng arm, std boom, wide pads, bkts ............ $84,000 Deere 450DLC, 2006, 8530 hrs, AC, med-lng arm, wide pds, cntr wgt rmvl w/bkt .. $72,900 Hitachi ZX85USB-3, 2011, 2207 hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w ENW . $77,500 .......... $104,000 Deere 350D, 2009, 6705 hrs ..... $94,000 Cat 324D, 2006, Hitachi ZX370, 2005, 12346 hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w w ENWV . $62,900 ..... $149,000 Deere 350D, 2008, 6545 hrs, Komatsu PC200LC, 2007 , ...... $54,900 Komatsu PC400, 1990, , .. $22,500 .... $154,000 Volvo ECR145, 2014, 1296 hrs,

SKID STEERS Deere 326E, 2014, 108 hrs, AC, EH cntrls, joystick, 2 sp, self-leveling aux hyd ....... $34,900 Deere 328D, 2012, 631 hrs, AC, EH cntrls, air ride seat, 2 sp, self-leveling, ........... $34,500 Deere 323D, 2011, 1024 hrs, &DE Z $& IRRW FQWUOV VSG UXEEHU WUDFNV w ENW .... $29,500 Deere 328D, 2010, 858 hrs, Cab w/AC, foot controls, 2 spd, gen purpose bkt ........ $32,500 Deere 318D, 2012, 239 hrs, A/C,EH cntrls, BBT,gen purp bkt ......................... $27,900

WHEEL LOADERS 2014 JD 544Ks - 2 in stock, 985-1655 hours, starting @ $139,000 2015 JD 544Ks - 6 in stock, 300-500 hours, starting @ $145,000 (AC, Coupler, 3 yd bkts, some avail. w/3rd valve & Hi Lifts, municipal owned) Deere 544E, 1990, 9811 hrs, Cab w/o AC, 17.5 tires, gen purp bkt ................... $25,000 Deere 524K, 2013, 1593 hrs, AC, 3 spool; qk cplr, ride cntrl, high lift ............... $125,000 Deere 544J, 2005, 5040 hrs, ride cntrl, dual diff locks, 20.5 tires gen purp bkt ....... $75,900 Deere 644H, 1999, 16425 hrs, Cab w/o AC, frnt diff lock, 23.5 tires, gen purp bkt ... $59,900 Deere 744H, 1999, 4073 hrs, AC, ride cntrl, frnt diff lock, 26.5 tires, gen purp bkt .. $112,000 Deere 624H, 2002, 10989 hrs, Cab w/o AC, ride cntrl, dual diff locks, gen purp bkt .. $45,900 Deere 644C, 1984, 0 hrs, Cab w/o AC, 20.5 tires; gen. purpose bucket ................. $15,500 Deere 644G, 1995, 18541 hrs, AC, ride cntrl, frnt diff lock, 26.5 tires, gen purp bkt .. $29,500

Contact John Reinen (used equipment manager) at 608-220-1723 or Lewis at 608-837-5141 ext.1019

For Photos & Detail Descriptions visit: www.brookstractor.com Six Locations in Wisconsin to serve you - Sun Prairie z Milwaukee De Pere z West Salem z Plover z Mt. Pleasant (OPENING SOON)

Page 38 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Find Holiday Gifts for All on Your List With CEG’s Gift Guide GIFTS from page 14

Construction Vehicles Wooden Magnets This 20-piece set of wooden magnets in construction vehicle shapes will be a big hit for quiet play or decoration. They sell for $15. http://www.jcpenney.com/ construction-vehicles-woodenmagnets/prod.jump?ppId=ppr 5007118979&catId=Search Results&searchTerm=construction

Melissa & Doug Stacking Construction Toy Trucks These fun stacking construction trucks are made to build, take apart and rebuild again and again. The chunky designs feature a bulldozer, dump truck and cement mixer on a freewheeling base. For ages 3 and up, the set retails for $20. http://www.jcpenney.com/ melissa-doug-stacking-construction-toy-trucks/prod.jump?ppId=1973194&catId= SearchResults&searchTerm=construction

Hard Hats #1 What could be better than a comic book featuring a super hero construction team? This first edition of Hard Hats sells for $5.99. https://squareup.com/store/tangocomics/

Stormy Construction Equipment Dog Bed Furry friends deserve a fun bed, too. Designed with removable, washable covers, this bed comes in two different sizes for various breeds. The large size sells for $79.99. http://www.zazzle.com/stormy_construction_equipment_dog_bed-256132556691753017

Earth Mover Dog T-shirt This fun T-shirt will surely be a hit with friends of the furry variety. They are machine washable and sell for $19.99. http://www.cafepress.com/+ earth_mover_dog_tshirt, 782499720

Sterling Silver Bulldozer Pendant Necklace A combination of jewelry and construction equipment will be a welcome gift, and this sterling silver necklace fits the bill. Made in the USA, its high polished, diamond cut finish makes it sparkle. The necklace sells for $19.98. http://www.bonanza. com/listings/-925Sterling-Silver-BulldozerConstruction-PendantNecklace/362631533? goog_pla=1&variation_id=129 313978&gpid=18283950120&keyword=&goog_pla=1&pos=1o5&ad_type=pla&gclid=CJiav 8bClNACFQYHhgodNfwIew

Construction Vehicles on Blue Socks Everyone needs a pair of socks decorated with construction vehicles. http://www.wheelhousedesigns. com/products/construction-vehicles-on-blue

Goodnight, Goodnight, Construction Site book “As the sun sets behind the big construction site, all the hardworking trucks get ready to say goodnight. One by one, Crane Truck, Cement Mixer, Dump Truck, Bulldozer and Excavator finish their work and lie down to rest — so they'll be ready for another day of rough and tough construction play.” This hardcover book features artwork by Tom Lichtenheld and a rhyming text by Sherri Duskey Rinker. It sells for about $10.99. http://www.target.com/p/goodnight-construction-sitehardcover-by-sherri-duskey-rinker/-/A-13297134?lnk= rec|pdpipadh1|related_prods_vv|pdpipadh1|13297134|0 Young Frank, Architect Book By Frank Viva This whimsical children’s book follows Young Frank, an aspiring architect, who lives in New York City with his grandfather, Old Frank, also an architect. Young Frank likes to use anything he finds — macaroni, pillows, toilet paper, shoes — to make buildings that twist, chairs with zigzag legs, and even entire cities. But Old Frank disapproves, saying architects only create buildings. One day they visit The Museum of Modern Art, where they see work by architects Frank Gehry, Frank Lloyd Wright, and many others. Old Frank learns that architects can do more than he thought. The Franks go home and create structures of every shape and size, using whatever they can get their hands on, even cookies. At the end of the day, Young Frank feels a little older, and Old Frank feels a little younger — and a little wiser. Retails for $16.95. https://store.moma.org/museum/moma/ProductDisplay_ Young%20Frank%20Architect_10451_10001_162154_1_26683_11486_162167 see GIFTS page 48

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 39

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

1.866.643.1010 ClearSpan.com/ADCEGMW

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

WE MANUFACTURE t WE INSTALL WE SAVE YOU MONEY BUILDINGS OF 1,000 USES

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

Fabric Structures

for more information or contact us at 1-800-683-5189

Hybrid Buildings

Foundation Solutions

ZERO PERCENT FINANCINGG AAVAILABLE AVVAILABLE

RESTRICTIONS R ESTTR ICT I ONS MAY MAY APPLY A PPLY

WHY BUY REBUILT, WHEN YOU CAN BUY REMANUFACTURED TO ORIGINAL DEUTZ FACTORY STANDARDS. Q

We are so confident about the quality of DEUTZ Xchange engines that we offer a national three-year limited, fully transferrable warranty.

DEUTZ Xchange engines are assembled with 100% genuine DEUTZ replacement parts and undergo a 300-point reconditioning process, which includes all the latest engineering advancements.

DEUTZ Xchange provides a no-hassle core return policy, and speedy delivery.

DEUTZ Xchange engines are available for the following:

914 Series

1011/2011 Series

1015/2015 Series

912/913/914 Series

413/511/513 Series

1012/1013 Series

2.9/3.6 short & long blocks

2012/2013 Series

Your source for DEUTZ Xchange engines across the Midwest.

DEUTZ Power Center

Page 40 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GREAT HOLIDAY GIFTS! Caterpillar 963D Track Loader, 1:50 Scale - $75

Bucyrus Erie 22-B Dragline, 1:50 Scale - $275

Bantam C-35 Dragline, 1:25 Scale - $290

Caterpillar D4 Tractor with 4S Bulldozer, 1:16 Scale - $200

Liebherr HS855 HD Dragline, 1:50 Scale $325 Bucyrus Erie 22-B Cable Shovel, 1:50 Scale - $210

Bantam Truck Crane, 1:50 Scale - $150

Caterpillar 340D L Excavator, 1:50 Scale - $115

Grove GMK3055 Tri-Axle Mobile Crane, 1:50 Scale - $225

John Deere 470G LC Excavator, 1:50 Scale - $85

Caterpillar D9T Track-Type Tractor, 1:50 Scale - $125

Komatsu 275AX-5 Sigma Dozer, 1:50 Scale - $110

Case 580 Super N Backhoe/Loader, 1:50 Scale - $90

Volvo EC460 CL Excavator, 1:50 Scale - $190

Allis-Chalmers TS-300 Motor Scraper, 1:50 Scale - $110

Caterpillar D6R Track-Type Tractor, 1:50 Scale - $85

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPmENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 41

PIRTEK Honors Management Excellence at Event

UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULE We know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on most excavators can deliver the extra force you need to break through – but only in short bursts. We knew there had to be a better way, so we took our jobsite experience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO

PIRTEK operations managers honored during the recent conference in Cocoa Beach, FL, include (L-R) Michael Dello Russo, Craig Jones, Jesus Garcia and Bert Banaszak.

PIRTEK USA has honored Bert Banaszak of PIRTEK O’Hare in Chicago as its National Operations Manager of the Year. Banaszak and several other managers received awards during PIRTEK’s 2016 Operations Managers Conference on Nov. 5 in Cocoa Beach, Fla. The 15th annual meeting gave operations managers from around the country an opportunity to network and learn best practices from one another. “It was great being named ops manager of the year,” Banaszak said. “I’ve been with the company a long time, starting out as a technician, and I’ve served in a number of different roles. A conglomeration of all those things has helped me understand what it takes to get the job done.” The only franchise of its kind in the United States, PIRTEK provides hydraulic and industrial hose replacement sales and services. There are 58 PIRTEK service and supply centers and a fleet of mobile service vehicles throughout the United States. Globally, PIRTEK has more than 400 locations and 2,000 mobile service vehicles in 23 countries around the world. PIRTEK’s National Operations Manager of the Year is based on counter sales and other criteria, including core product sales, teamwork, image and best practices. Banaszak’s approach to operations management is to make coaching one of the most pervasive features of his work. “I’m a true believer in managing 25 percent of the time and coaching 75 percent,” he said. Banaszak also credited his shop manager, Rick Fender, whom he says has been a major help in the location’s success. Regional Operations Manager of the Year honors went to Juan Beltran, PIRTEK Norcross (Southeast region); Michael Dello Russo, PIRTEK Avon (Northeast); Banaszak (Midwest); Craig Jones, PIRTEK North Valley (Southwest); and Jesus Garcia, PIRTEK Commerce South (West). PIRTEK also presented a pair of service awards to Chris Cortes, PIRTEK Madison Heights, for 15 years of service, and another to Mike Byers of PIRTEK Westland for 10 years. For more information about PIRTEK USA, visit www.pirtekusa.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

conventional excavators from the SK210LC to the SK500LC. It provides all the extra muscle you need continuously so you can power through the toughest jobs without interruption.

MINI

SHORT RADIUS

CONVENTIONAL

KOBELCO-USA.COM

We have PARTS for your IH, Dresser, Dressta Machines with OVERNIGHT DELIVERY!

Dressta TD15M Extra: New 6-Way Blade, Long Track, Trimble GPS Equipped, Brush Sweeps, 3 Year 4000 Hour Warranty, 26" Track Shoes .. ..........................................................$295,000

2013 Kobelco SK80CS: Great condition with only 1024 hours complete with hydraulic coupler and Geith bucket. U/C is 80% with 24" shoes. Enclosed cab with heat and a/c ............ ............................................................$78,000

2015 Kobelco SK210-9: Very clean, very nice. Hand control auxiliary hydraulics, hand control pattern changer, pneumatic seat. Comes with Strickland 42" bucket with Esco teeth and weld on Strickland hydraulic thumb. 451 hrs, still under warranty! ................................$146,500

SERVICE

UNDERCARRIAGE

Shop and field services! We specialize in rebuilding components such as engines, transmissions, and final drives. We are proud of our ability to accommodate your needs with any make and model!

Aftermarket undercarriage components for any make and model!

618-435-2330 Benton, Illinois www.BRTRACTOR.COm OEM & Aftermarket Undercarriage Components for your IH or Dresser, as well as Aftermarket Undercarriage for any Make & Model!

Page 42 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Milestone’s Plant Supplies Asphalt for Road Work on Site INDOT from page 1

Hamilton and Madison counties. The design-build project, which broke ground last April, is being financed by INDOT and the Indiana Finance Authority. The work is adding a third travel lane in each direction (north and south) to the median between state Road 37 (Exit 205) and state Road 38 (Exit 219) and is adding a southbound lane along the shoulder between the 116th Street entrance ramp and the future 106th Street exit ramp. Other elements include rehabilitating existing bridges such as Brooks School Road and Madison County Road 650W bridges and widening of the Campus Parkway bridge, the reconfiguration of the Campus Parkway interchange (Exit 210) into a double crossover diamond design to improve traffic flow, the rebuilding and lowering of the state Road 13 (Exit 214) pavement under I-69, and upgrading of various pavements and drainage structures. Noise barriers also are being placed along I-69 near exits 210 and 214 to mitigate the impacts on adjacent properties due to the additional travel lane. The decision to install noise barriers was made following a study of the existing and anticipated noise levels that was then subjected to “reasonable and feasible” analysis, according to the project website. The walls are being placed at Cumberland Crossing/Cumberland Woods (east of Cumberland Road), Brooks Chase (east of Brooks School Road), Roselake (east of state Road 13) and Whispering Woods (north of 126th Street). This section of road was completed in 1971, with most of the bridges built between 1962 to 1966. It currently handles an average of 65,000 vehicles daily, and when the work is done, will be able to increase traffic capacity by 50 percent with the third lane. “Northeast of Indianapolis is a rapidly developing area of Indiana that has seen tremendous growth,” said Nathan Riggs, information director, INDOT East Central District. “Likewise, I-69 traffic volumes have increased as this is a primary route for daily commuters — in addition to interstate passen-

Crews from Milestone Contractors L.P. are making steady progress on the highway northeast of Indianapolis in Hamilton and Madison counties.

ger vehicles and freight traffic sharing the route. Adding a third lane will increase safety by increasing the capacity of the highway. An additional lane also allows greater potential to maintain traffic flow in the event of a traffic incident. Currently, when a crash occurs with only two lanes, it can quickly create significant backups, which increases the probability of a secondary crash.” The road system is being designed by United Consulting as part of Milestone’s Design Build Team. “One of the benefits of the pavement design is that it puts the new pavement and the existing pavement on the same maintenance schedule,” said Riggs, “which is better for the taxpayer and more convenient for the many motorists who use this route.” The work will impact traffic, but efforts to minimize it are being made via night work to speed up the construction. Two lanes will remain open during peak daytime travel times on I-69. “The speed limit on I-69 through the work zone has been reduced to 60 miles-per-hour and is further reduced to 50 mph when workers are present,” said Riggs. “Construction at the Campus

Parkway interchange began on July 5. The first phase of construction prepared the public for shifting traffic into a double-crossover diamond configuration, which will improve traffic flow during widening of the bridge and construction of the permanent improvements. We’re using message signs and social media to communicate delays and alternate routes to motorists as the construction proceeds and various land closures are implimented.” INDOT conducted several wellattended public meetings in the last two years to explain the project. Ron Nagle, Milestone’s project manager, has worked on several multi-mile projects that had crews working year-round. “We did the asphalt overlay of the existing southbound lanes and started widening the third lane in the median on the south end working north,” he said. “We’ve paved three miles and have another five miles to do, as well as five miles of barrier wall. We can’t pave in the winter, but we’ll be doing some pipe work and bridge work and installing two of the sound walls.” Thirteen bridges — short spans — are either being widened, overlayed or re-decked, including four sets of twin bridges that cross

creeks. The other five cross roads. “The widening is taking place in the middle,” said Nagle, “which gives us enough room to shift traffic so that we can maintain two lanes on each side and do the bridge overlays.” While most of the construction challenges were anticipated, the rain that hit the work site last August and September were not expected. “The rain hurt all the road construction business in Central Indiana,” said Nagle. “It really slowed us down, but we extended our hours from 10 to 12, working all the daylight hours and on Saturdays. We’re catching up and we’re enjoying better weather in October and November than we expected. Everything is balancing out. “All the paving/overlay work was done at night and we set up our barrier wall at night,” he said. “For anything that we have to restrict the interstate down to one lane, we have between 9 p.m. and 6 a.m. to do it. This includes the installation of bridge beams and paving that we’ll be doing next year. Up until mid-October we had a night shift crew every night.” Three fields at three of the interchanges along the worksite are

being used to store equipment, materials, as well as medians at various sites. Milestone’s field office is located half-a-mile from the project in a rented building, which also houses INDOT. Milestone’s asphalt plant, which is supplying the 400,000 tons (362,873 t) of asphalt for the road work, is close to the site and Irving Materials Inc. (IMI), the concrete supplier, has several plants in the surrounding area. On a peak day there are close to 75 Milestone workers and subcontractors, who are spread over 10 mi. at multiple sites. “We’ve got a couple of bridge, dirt and road crews going,” said Nagle. “I go out every day, as much as I can, to talk with the guys and see what’s going on and find out what we need to anticipate. We have a superintendent with each of the crews. Chad Scott, our construction superintendent, manages and schedules the majority of the work on site and he visits the crews daily.” Milestone expects to move 350,000 cu. yds. (27,594 cu m) of earth, concrete, and asphalt. In addition to the asphalt that is being brought in, there also will be 13,000 cu. yds. (9,939 cu m) of concrete, 1,000 tons (907 t) of steel, 70,000 tons (63,502 t) of sand and aggregate and 170,000 sq. ft. (15,793 sq m) of sound barrier. The subcontractors are: ABC Cutting Contractors Inc. for concrete and asphalt sawcutting; Bunn Enterprises Inc. for underdrain; CTech Corporation for guardrail, cable barrier and steel bridge rails; Earth Images Inc. for erosion control, seeding and sodding; Gridlock Traffic Systems for construction signs, pavement markings and traffic control items; Harmon Steel Inc. for the installation of reinforcing steel and steel bridge beams; Hoosier Company Inc. for sheet signs, lighting and traffic signals; Hydro-Technologies USA LLC for bridge and hydro demolition; Insituform Technologies USA LLC for cured-in-place pipe liner; K & S Markers Inc. for removal and installation of snowplowable raised pavement markers; Mt. Carmel Stabalization Group Inc. for subgrade treatment; N.I. Spanos Painting for surface seal, paint steel bridge beams and paint see INDOT page 108

SECTION

Attachments Pages 43-47

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Geith Tilt Bucket Provides Coverage on Uneven Terrain

Specially designed for the new small-frame G-Series skid steers (312GR, 314G, 316GR, 318G) and compact track loader (CTL) (317G), the grading-heel bucket attachments are ideal for customers performing final grading applications.

John Deere Expands Its Lineup With New Grading-Heel Buckets John Deere is expanding its lineup of easy-to-use Worksite Pro attachments with the new grading-heel buckets. Specially designed for the new small-frame G-Series skid steers (312GR, 314G, 316GR, 318G) and compact track loader (CTL) (317G), the grading-heel bucket attachments are ideal for customers performing final grading applications. The grading-heel buckets are similar in style and dimensions as standard dirt buckets, but feature a squared-off heel for back-dragging applications. The bottoms of the buckets are smooth, with no lifts or edges, which allow the bucket to create a flat surface with ease. These features make the grading-heel bucket an ideal option for a variety of jobs, including land

shaping, dirt leveling and installation of new landscape for sodding, irrigation and drainage. The grading-heel buckets are available in two sizes — 60- and 66-in. (152 and 167 cm) — for use with most compact models in the G-Series lineup. “We’re seeing construction spaces getting tighter, especially in the residential building industry, and customers are seeing the value of operating smaller machines in these areas,” said Gregg Zupancic, product marketing manager, John Deere Construction & Forestry. “Add an attachment like the new grading-heel bucket, and contractors can work comfortably and efficiently in tight quarters without sacrificing productivity.” Worksite Pro buckets, like the grad-

ing-heel options, are ideal ways to take advantage of skid steers’ and CTLs’ steep dump angle and high bucket rollback, according to the manufacturer. With the universal, self-cleaning Quik-Tatch easy attachment system found on all John Deere skid steers, CTLs and compact excavators, the machine can easily add and remove the grading-heel bucket in no time. The new attachment series also is backed by John Deere parts, service and warranty coverage. For more information, visit www.johndeere.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Geith tilt buckets angle up to 45 degrees in either direction, enabling operators to complete slope finishing, land clearing and grading with greater ease. Available in a wide variety of sizes, Geith tilt buckets weigh between 388 and 2,039 lbs. (176 and 924.8 kg), with the largest model boasting a heaped capacity of 1-3/4 cu. yds. (1.3 cu m). Designed for use with excavators ranging in size from 3 to 30 tons (2.7 to 27.2 t), standard design features include a reversible bolt-on cutting edge, heavy-duty side cutters and wear pads. Corrosion-resistant high tensile pivot pins help safeguard tilt buckets against harmful wear patterns. For more information, visit www.geith.com.

Page 44 • December 3, 2016 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Owner Hits the Road to Demo Splitter Eric Ransome, owner of Atlantic Excavator Attachments, has taken to the road to demonstrate how his Black Splitter log splitter attachments can optimize firewood processing, wood chipping and mulch processing operations. He has been traversing the MidAtlantic region conducting free onsite demonstrations to accomplish the mission. Ransome embarked on this campaign after recognizing that previous onsite demonstrations successfully conveyed the transformative power of this log splitter attachment. His goal is to showcase the Black Splitter’s ability to handle and split large timber with a single operator while reducing the manpower and costs associated with traditional operations. While most of Atlantic’s customers mount the cone splitter on various sized excavators, Ransome acquired the Vermeer S725TX mini-skid steer for its cost-efficiency, transportability, and diverse functionality. He purchased the compact workhorse in August 2016 from Lumberton, N.J.based Vermeer North Atlantic. “The combination of the Vermeer

John Deere…

Hydraulic Coupler Makes Switching Buckets Easier The hydraulic coupler is designed for 35G, 50G and 60G excavators and is compatible with the ever-expanding lineup of John Deere Worksite Pro attachments.

Eric Ransome demonstrates the Black Splitter mounted on a Vermeer S725TX mini-skid steer at a recent onsite demonstration.

S725TX and the Black Splitter has the ability to revolutionize firewood processing, wood chipping, and mulching operations by effortlessly handling and breaking down back-breaking big rounds,” Ransome said. “This impressive team will even split logs that can-

not be processed by expensive firewood processors.” For more information, visit blacksplitternj.com/videos/. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Caterpillar Offers Flat-Floor Buckets Caterpillar Attachments now offers a performance series flat-floor bucket designed specifically for Cat M and K Series small wheel loaders. The new flat-floor buckets are general purpose buckets that incorporate a specially designed long floor and a rear cutting edge to provide optimum results and productivity when performing light grading or back-dragging — while retaining all the premium loading-characteristic of the performance series. Performance series buckets feature curved side bars to promote an aggressive cut, as well as better rollover, and also incorporate a wide-throat design for easier loading and increased fill factors. Compared with flat-floor buckets of the same rated capacity, the Cat performance series models have higher fill factors, averaging 110 percent, resulting in greater productivity and lower costs per yard, according to the manufacturer. The reinforced side edges, corner and side-edge protec-

The new performance series flat-floor buckets are available in rated capacities from 3.0 to 3.8 cu. yds. (2.3 to 2.9 cu m) and with a choice of interfaces — pinon, Fusion coupler or ISO.

tors, plus the bolt-on cutting edge or weld-on teeth extend the life of the bucket’s base surfaces, and an integrated spill guard and material-deflector plates protect the bucket linkage from spill-over. The long-floor models also work well with laser control during forward grading, and the rear cutting edge is designed to leave a quality finish when backdragging. The new performance series flat-floor buckets are available in rated capacities from 3.0 to 3.8 cu. yds. (2.3 to 2.9 cu m) and with a choice of interfaces — pin-on, Fusion coupler or ISO. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Switching buckets has never been easier with the new John Deere hydraulic coupler (16GE23) for compact excavators. Operators are no longer required to exit the cab to switch buckets, so site clearing can continue with high productivity and minimal interruptions. The hydraulic coupler is designed for 35G, 50G and 60G excavators, and is compatible with the ever-expanding lineup of John Deere Worksite Pro attachments. The hydraulic coupler offers many key features that help drive additional productivity from an excavator. Most notable is the wedge bar locking system that compensates for wear and keeps the coupler joint tight. The wedge-style bucket pickup enables compact excavators to maintain breakout forces by keeping weight down, and operators can easily switch to other attachments, such as hydraulic hammers, with an adaptive bracket. The coupler is activated using a rocker switch. Once activated, curling the bucket unlocks the coupler. “The hydraulic coupler optimizes job site performance and productivity by simplifying the bucket-switching process, so projects are no longer interrupted by a complicated, manual attachment-changing procedure,” said Mark Wall, excavator product marketing manager, John Deere Construction & Forestry. “This coupler was designed with smart features to quickly change attachments and keep operations up and running without enduring a long-drawn-out process.” The hydraulic coupler works with a variety of Worksite Pro buckets and attachments, and is compatible with most competitive models. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • December 3, 2016 • Page 45

www.zieglercat.com 5426 Hwy 71 North Bemidji, MN 56601 218-751-1033 • 866-634-9983 3311 Liberty Lane Brainerd, MN 56401 218-829-9800 • 877-829-9850 Fax : 218-833-8530 10081 East Hwy 169 Buhl, MN 55713 218-258-3232 • 800-446-9795 Fax : 218-258-3224 13822 West Freeway Drive Columbus, MN 55038-9705 651-982-5600 • 866-982-5656 Fax : 651-982-5650 720 3rd Ave SW Crookston, MN 56716-0538 218-281-4245 • 800-422-5782 Fax : 218-281-3852 210 Garfield Ave Duluth, MN 55802-2696 218-722-6628 • 800-421-3831 Fax : 218-722-0307 3502 State Hwy 210 West Fergus Falls, MN 56537-4003 218-736-2680 • 800-346-7649 Fax : 218-736-2625 191 Industrial Parkway Jackson, MN 56143 507-847-7600 • 866-847-6401 Fax : 507-847-7610 2145 Howard Drive West Mankato, MN 56003 507-388-1444 • 877-845-3938 Fax : 507-388-5909 1200 North Hwy 59 Marshall, MN 56258-2761 507-532-4403 • 800-325-4929 Fax : 507-537-1519 901 West 94th Street Minneapolis, MN 55420-4236 952-888-4121 • 800-352-2812 6340 Hwy 63 South Rochester, MN 55904-8414 507-285-1775 • 800-247-1068 Fax : 507-536-5001 8000 County Road 101 East Shakopee, MN 55379-9734 952-887-4570 • 800-352-2812 2225 255th Street St. Cloud, MN 56301-8742 320-253-2234 • 800-522-9469 Fax : 320-253-2187 2987 Hwy 12 West Willmar, MN 56201-9743 320-235-0614 • 844-276-6736 Fax : 320-235-0955 1500 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3800 • 800-342-7002 951 Park Drive Atlantic, IA 50022 712-243-1039 • 877-547-3819 Fax : 712-243-1099 3366 5th Ave South Fort Dodge, IA 50501-6428 515-576-3161 • 800-342-1848 Fax : 515-576-7564 11490 265th Street Mason City, IA 50401-9656 641-423-7240 • 800-342-1849 Fax : 641-423-8106 308 North Lawler Postville, IA 52162-7802 563-864-7461 • 800-526-0889 Fax : 563-864-7463 102 Crossroads Drive Sheldon, IA 51201 712-324-5604 • 855-344-5604 5300 Harbor Drive Sioux City, IA 51111-1114 712-252-4401 • 800-342-1847 Fax: 712-252-4830

www.crawfordsequip.com

www.lanoequip.com

4898 Highway 95 NW Cambridge, MN 55008 763-689-1794 • 866-649-6853 Fax: 763-689-3028

6140 Highway 10 NW Anoka, MN 55303 763-323-1720 • 888-448-5266 Fax: 763-422-3949

12500 DuPont Avenue South Burnsville, MN 55337 952-890-8880 800-950-3298

6700 Highway 10 Northwest Sauk Rapids, MN 56379 320-259-6222 800-950-4803

6565 Gateway Drive Grand Forks, ND 58201 701-772-4842 800-726-5383

2801 North Louise Sioux Falls, SD 57107 605-336-2730 800-388-2730

3021 West 133rd Street Shakopee, MN 55379 952-445-6310 • 877-753-6100 Fax: 952-496-0263

1236 60th Avenue NW Rochester, MN 55901 507-282-8888 800-950-4795

2900 Main Avenue SE Moorhead, MN 56560 701-526-2200 800-726-5386

6320 Highway 2 East Minot, ND 58701 701-852-3962 800-726-3186

1540 Deadwood Avenue Rapid City, SD 57702 605-348-1566 800-658-4590

23580 Highway 55 Loretto, MN 55357 763-479-8200 • 888-479-4342 Fax: 763-479-8201

1910 LorRay Drive North Mankato. MN 56003 507-387-1836 800-950-7055

2000 Industrial Drive Bismarck, ND 58502 701-223-5798 800-726-5391

14057 49th St. NW Williston, ND 58801 701-577-0736 877-631-7874

1710 East College Drive Marshall, MN 56258 507-532-0994 800-934-3923

11105 33rd Street SW Dickinson, ND 58601 701-483-0115 855-740-9652

4935 6th Avenue SE Aberdeen, SD 57401 605-225-6772 800-843-1865

www.rdoequipment.com

Page 46 • December 3, 2016 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • December 3, 2016 • Page 47

Visit us at ConExpo in Booth G3748 (gold lot)

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

Page 48 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CEG Makes Gifting Easy for the Construction Enthusiast GIFTS from page 38

Construction Destruction Computer Game by Valuesoft This game challenges players to “take on projects, completing them on time and within budget to become a construction tycoon. But keep your machines in control and your temper in check or you’ll pay the price for a botched job. Bid on jobs pushing your rigs to the limit to complete projects on time and on budget. Show ‘em you got what it takes to make it big. Maneuver the wrecking ball to demolish a building or use the hook to transport heavy objects. Minimum Requirements: Windows 98/ME/XP or Vista Pentium III 500 MHz 300 MB hard drive space 128 MB RAM 16 MB 3D accelerated video card with DirectX 8.1 compliant video drivers DirectX compatible sound card DirectX 8.1 (included on CD) CD-ROM. Sells for $8.98. https://www.amazon.com/Construction-Destruction/dp/B0002CU1P0/ref =sr_1_12?ie=UTF8&qid=1478449445&sr=8-12&keywords=construction+video+games

John Deere Little Boys Tee and Backpack Set This set includes a long-sleeved T-shirt and a 16 in. (40.6 cm) backpack, and sells for $32.99. https://www.amazon.com/Deere-LittleSleeve-Backpack-Construction/dp/ B01KKC97JM/ref=sr_1_24?ie=UTF8 &qid=1478449757&sr=8-24&keywords =construction+clothing

Pinbo Newborn Boys Construction Set This baby photography photo prop set is 100 percent handmade and comes in one size suitable for 0 to 6 months. https://www.amazon.com/Pinbo-NewbornConstruction-Pants-Photography/dp/B010K4550U/ ref=sr_1_74?ie=UTF8&qid=1478450167&sr=8-74 &keywords=construction+clothing

Silver Metal Backhoe Clock This clever desk clock is a metal replica of a backhoe, and is available with imprinting options. http://thegiftplanner.espwebsite.com/ ProductDetails/?productId=4805719

Tape Measure Suspenders These suspenders with a tape measure design make a great gift for those who “measure up” to the job. The suspenders are made of 2-in. wide elastic with a leather back patch, and come in several lengths. They sell for $14.95. http://www.suspenderstore.com/btapemeasureb.html

EdgeWorks Pen Screwdriver Tool This clever multitool includes a tablet stylus for tablet or phone, a pen, screwdrivers, a bubble level, and a ruler, all in a lightweight durable bright yellow aluminum housing. It sells for $10.99. https://www.amazon.com/EdgeWorks-Screwdriver-Multitool-ScrewdriversLightweight/dp/B01DU1L66C/ref=sr_1_4?s=hi&ie=UTF8&qid=1478451913&sr=14&keywords=construction+gifts

Tape Measure Gift Set This set includes an M1 tape measure in a gift box. It sells for $29.95.

https://www.amazon.com/ M1-Tape-Measure-Gift-Set/dp/ B00A7ZHOE8

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

SECTION

Trucks & Trailers Pages 49-57

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Mack GuardDog Connect Now Standard in Mack LR Models Mack GuardDog Connect, Mack’s integrated telematics solution, is now available and standard in all Mack-powered vehicles, including the Mack LR, Mack’s newest refuse model. Mack made the announcement today at the Canadian Waste and Recycling Expo in Toronto. Mack expanded the offering of GuardDog Connect to Mack LR low-entry cabover refuse models equipped with an MP engine after receiving ongoing positive feedback from customers. “Uptime support is as important for our refuse customers as our highway customers,” said Curtis Dorwart, Mack refuse product marketing manager. “GuardDog Connect simplifies the diagnostic and service process and combines purposeful telematics technology with Mack experts who can help keep the customer on the job.” GuardDog Connect is Mack’s proactive diagnostic and repair planning system. It monitors fault codes that could potentially shut down a truck or lead to an unplanned visit to the dealer and is an integral part of Mack’s ongoing commitment to Uptime. GuardDog Connect, through Mack OneCall agents, Mack’s 24/7 service support team, enables the quick diagnosis of issues, proactive repair scheduling and parts confirmation, all while the truck remains on the job. Mack OneCall agents are able to manage all of this through Mack ASIST, a cloud-based service relationship management tool that keeps fleet customers, dealers and service providers and Mack field staff connected during service and repair events. “Uptime is a must-have for all of our customers, and refuse customers are no exception,” Dorwart said. “Offering GuardDog Connect in the Mack LR enables us to pro-

Mack GuardDog Connect, Mack’s integrated telematics solution, is now available and standard in all Mack-powered vehicles, including the Mack LR, Mack’s newest refuse model.

vide the same high level of service and support to all Mack-powered vehicles in our lineup, addressing the needs of all customers, in all applications.” Through GuardDog Connect, LR customers also will have the same access to Mack’s suite of fleet management services as other customers, including Telogis and Omnitracs. Telogis is a leading provider of cloud-based intelligence software, and Omnitracs uses GuardDog Connect telemat-

ics hardware to capture and relay information such as relative road speed and idling duration and cost. Mack first introduced its LR model at WasteExpo 2015. Built specifically to meet the challenges of refuse customers who require enhanced maneuverability, increased driver comfort and improved visibility, the Mack LR model is available in three-axle 6x4 configurations and can be powered by diesel or natural gas. The 11-L Mack MP 7 diesel

engine is standard in the LR model, delivering 325 to 355 hp and 1,200 to 1,280 lb.-ft. of torque. The Cummins Westport ISL G natural gas engine is optional. The LR model is equipped with an Allison RDS five-speed or six-speed automatic transmission. Mack announced earlier this year that GuardDog Connect was standard on all TerraPro cabover models, which can be configured for many applications including refuse, concrete pump, dump or

mixer. Mack had previously made GuardDog Connect standard on TerraPro concrete pump chassis in 2015 and was the first OEM in the industry to offer proactive support service for pump applications. GuardDog Connect has been standard on the Mack Pinnacle, Mack Granite and Titan by Mack models since 2013. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 50 • December 3, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Wilfried Achenbach…

Daimler Trucks Tech Expert to Present Green Truck Summit Keynote Address Wilfried Achenbach, senior vice president of engineering trification that closely parallels this year’s Green Truck and technology of Daimler Trucks North America, will serve Summit theme of creating an impactful and efficient path to as keynote speaker at the 2017 Green Truck Summit on zero-emission commercial vehicles.” March 14. His address will offer insights into the technoloPrior to joining Daimler Trucks North America, gy, energy and environmental issues that will shape the Achenbach was responsible for mechatronics systems for future of the work truck industry, based on his experience in Daimler AG in Stuttgart, Germany, focusing on electrical truck mechatronics, a multidisciplinary field of engineering and electronics development for the next generation of that combines systems, mechanical, electrical, telecommuni- European trucks. Concurrently, he led the mechatronics cations, control and computer engineering. group within the global Daimler Trucks development organThe Green Truck Summit is a premier alternative fuels ization. and advanced technology conference held annually in conBefore moving to Daimler Trucks, Achenbach held varijunction with The Work Truck Show. Produced by NTEA — ous positions within the passenger car division, focused on The Association for the Work Truck Industry, the 2017 driving dynamics and driver assistance, also spending severSummit takes place March 14 to 16 at the Indiana al years in a senior executive position at Chrysler. He earned Convention Center in a diploma in physics and a Indianapolis, Ind. Work Ph.D. in nuclear physics at Truck Show educational sesJohannes Gutenberg sions begin March 14, and University in Mainz, the exhibit hall is open March Germany. 15 to 17. Following Achenbach’s The summit kicks off address, Green Truck Summit March 14 at 8:30 a.m. with attendees will participate in a opening remarks followed by variety of general sessions Achenbach’s keynote address offering balanced perspectives at 8:45 a.m. General sessions from vocational truck and then run from 9:30 a.m. to 5 energy industry experts. For a p.m. Lunch is included, and a schedule of sessions, visit reception tops off the event worktruckshow.com/greenfrom 5:15 to 6:15 p.m. trucksummit. Attendees also can choose The Green Truck Summit is from Green Truck Summit a forum to highlight deployand Work Truck Show conable and emerging zero-emiscurrent sessions March 15 to sion and near zero-emission Wilfried Achenbach, senior vice president of engi16. neering and technology of Daimler Trucks North technologies and fuels for Achenbach is responsible America, will serve as keynote speaker at the 2017 multi-stage commercial vehifor all product engineering Green Truck Summit on March 14. cles. It offers resources and and planning functions, insights to fleet managers, including design, testing, styling, analysis and compliance. truck manufacturers, dealers, distributors and service He is a member of Daimler Trucks North America’s operat- providers. In addition to participating in the educational coning committee, the thought leadership team that guides the ference, attendees can get technical and regulatory questions company’s decisions regarding technological evolutions and addressed by NTEA staff and get an up-close look at the developments to meet the future needs of customers and the newest clean-energy products in the Productivity and Fuels environment. Fleet managers, truck dealers, equipment dis- Pavilion on the exhibit floor. tributors, manufacturers and upfitters will benefit from his The Work Truck Show features the latest vocational global perspective on how work trucks will evolve — in trucks, vans, vehicle components and equipment on a trade terms of technology, fuel and functionality — over the next show floor covering more than 500,000 sq. ft. The event 20 to 30 years, and how concepts evolve into actions to pro- includes a robust educational conference with sessions on duce a reliable, production-ready vehicle. emerging national and global trends affecting the commer“Being one of the handful of people in the world who sit cial truck industry, as well as strategies and technologies in a position to influence the advancement of work truck being developed in response. technologies for the next several decades makes Dr. Register for the Green Truck Summit and The Work Truck Achenbach a really interesting choice for keynote speaker Show 2017 at worktruckshow.com or call 800/441-6832. (This story also can be found on Construction Equipment this year,” said Doyle Sumrall, NTEA managing director. “Among other things, he has a solid vision of vehicle elec- Guide’s website at www.uykl.com.)

The FTR is slated to go into production at a new facility in Charlotte, Mich., in mid-2017.

Isuzu Announces Details of All-New F-Series Truck Isuzu Commercial Truck of America Inc. announced key specifications of its all-new entry in the Class 6 medium-duty truck segment, the 2018 Isuzu FTR. Among the highlights: • 25,950 lbs. (11,770 kg) GVWR • The FTR will be available in eight wheelbase lengths ranging from 152 to 248 in. (386 to 630 cm), accommodating bodies from 14 to 30 ft. (4.2 to 9 m) long • The FTR is a dock height class 6 truck • The turbocharged Isuzu 5.2-L 4HK1-TC engine propelling the FTR will generate 215 hp and 520 lbs.-ft. of torque • The engine will be mated to an Allison six-speed automatic transmission with power take-off (PTO) capability • Dana axles will have capacities of 12,000 lbs. (5,443 kg) up front and 19,000 lbs. (8,618 kg) rear suspension • Bridgestone or Continental 11R22.5 tires will be fitted to 22.5 by 8.25 in. (57 by 21 cm) steel wheels The FTR is slated to go into production at a new facility in Charlotte, Mich. in mid-2017. When Isuzu announced the truck at NTEA’s 2016 Work Truck Show in March, Shaun Skinner, president of Isuzu Commercial Truck of America, said, “This truck represents our vision of the future of the medium-duty truck industry. The overall concept of the FTR is to bring to our customers the next generation medium-duty low-cab-forward truck, one that features a clean, durable, highly-efficient four-cylinder engine and is the best Class 6 choice for urban pickup and delivery. The letters ‘FTR’ don’t stand for ‘future,’ however this truck represents the future, and it will be here — soon. For more information, call 866/441-9638 or visit www.isuzucv.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 3, 2016 • Page 51

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857

K.C. Bobcat

McCann

2209 SW US Hwy. 40 Blue Springs, MO 64015 800-697-4228 Fax: 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001 www.kcbobcat.com

Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Willmar 1515 West litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

Transwest Truck Trailer RV 17327 S Outer Road Belton, MO 64012 816-454-7340 Fax: 816-454-7837 www.transwest.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 • Fax: 812-421-1036 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 • Fax: 812-299-3687 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 • Fax: 618- 242-9161 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 • Fax: 270-781-0907 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 • Fax: 615-641-1108 www.diamondequipment.com

Ziegler CAT

RDO Equipment Co.

8000 County Road 101 East Shakopee, MN 55379 800-352-2812

Burnsville, MN 952-890-8880 Rochester, MN 507-282-8888 North Mankato. MN 506-387-1836 Marshall, MN 507-532-0994 Sauk Rapids, MN 320-259-6222 Moorhead, MN 701-526-2200 Bismarck, ND 701-223-5798 Dickinson, ND 701-483-0115 Grand Forks, ND 701-772-4842 Minot, ND 701-852-3962 Williston, ND 701-577-0736 Aberdeen, SD 605-225-6772 Sioux Falls, SD 605-336-2730 Rapid City, SD 605-348-1566 www.rdoequipment.com

13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Page 52 • December 3, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

4 DIESEL OIL CHANGES

$385.

FEDERAL DOT VEHICLE INSPECTION

$98.

FOR SYSTEMS 7 QT OR LESS. INCLUDES OIL, FILTER, DISPOSAL, AND MULTIPOINT INSPECTION.

IN THE BUSINESS OF DOING BUSINESS? NOW NEWLY AVAILABLE HERE AT FURY DODGE RAM OF LAKE ELMO FOR YOUR COMPLIANCE NEEDS FOR MINNESOTA AND WISCONSIN.

RESTRICTIONS MAY APPLY, CONTACT YOUR SERVICE ADVISOR FOR MORE INFORMATION.

5550 SERIES TRUCKS AND SMALLER. NOT AVAILABLE FOR AIR BRAKE APPLICATIONS. OTHER RESTRICTIONS MAY APPLY, CONTACT YOUR SERVICE ADVISOR FOR MORE DETAILS.

Dodge Ram Tough Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

Gas-2500, Ready for Plow

Jeff Leonard or Dale Coggin Service Department

Fury Dodge Ram of Lake Elmo, Minnesota 651-256-8125 • Visit us at furymotors.com

2 Ram 5500 4x4 108 c/a. please call for spec

2016 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group

NEW PROMASTERS HERE & IN TRANSIT

COMMERCIAL HEADQUARTERS Jeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change George Miller 952-469-6820 gmiller@jeffbelzer.com

John Zadurski 952-469-6817 jzadurski@jeffbelzer.com

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 3, 2016 • Page 53

23 New 2016 and 2017 Ford F450 Pickups and F550 Chassis Cabs

2016 FORD F550 XL, 4x4, Super Cab, 6.7 Power Stroke, Knapheide Body, Stellar Crane, Hyd. Air Compressor, Stock# G8820S Sale Price $105,200 Ford Retail Cash –$2,500 Ford Credit Finance Cash –$750 Ford Black Friday Cash –$1,000 Ford Commercial Upfit Cash–$1,000

2016 FORD F550 XL, 4x4, Reg. Cab, 6.7 Power Stroke, 19,500 GVW, 165” WB, Stock# G8830S

2016 FORD F550 XL, 4x4, Super Cab, 6.7 Power Stroke, 19,500 GVW, 186” WB, Stock# G8840S

2016 FORD F550 XL, 4x4, Crew Cab, 6.7 Power Stroke, 19,500 GVW, 200” WB, Stock# G8828S

2017 FORD F450 XLT, Dually Pickup Crew Cab, 6.7 Power Stroke, Stock# H8870S

2017 FORD F550 4X4 XL, Reg. Cab 6.8 V-10 Gas, 6 Spd Auto, Stock# H8856S

2017 FORD F550 XL, 4x4, Reg. Cab, 6.7 Power Stroke, 19,500 GVW, 169” WB, Stock# H8853S

2017 FORD F550 4X4 XL, Super Cab, 6.7 Power Stroke, Stock #H88675

2017 FORD F550 XLT, Super Cab, 6.7 Power Stroke, Stock# H8874S

2017 FORD F550 XL, 4x4, Crew Cab, V10 Gas, 19,500 GVW, 203” WB, Stock# H8857S

2017 FORD F550 4X4 XL, Dually Pickup Crew Cab, 6.7 Power Stroke, Stock# H8869S

2017 FORD F550 XLT, 4x4, Crew Cab, 6.7 Power Stroke, 19,500 GVW, 203” WB, Stock# H8854S

SALE PRICE $99,950

Please contact your Ford Wallwork sales representative for pricing/incentives/availability

FARGO, ND • 800-937-3003 wallworktrucks.com

Page 54 • December 3, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Elliott’s 36142 Boom Truck to Serve Range of Customers Elliott Equipment Company released the 36 ton (32.6 t) 36142 boomtruck telescopic truck-mounted crane model featuring the longest boom available in its class. With a 5-section 142 ft. (43 m) main boom and optional 32 to 49 ft. (9.7 to 15 m) two-section jib, the 36142 offers a maximum tip height of 201 ft. (61 m). The new model is designed to serve a range of customers, including those in the utility/transmission construction industry who have ongoing needs for long-reach telescopic cranes on road legal chassis that can be used for both material handling and working at height using a detachable work platform. Key Features include: • 34 ft. 9 in. to 142 ft. (10.6 to 43 m) extended 5-section telescopic main boom • 36-ton lifting rating at a 5 ft. (1.5 m) load radius • Standup ride-around lower control console • Optional open seated controls or enclosed crane cab with heater and optional A/C • 9,060 lb. (4,109 kg) single line pull winch with 12,800 lb. (5,806 kg) bare drum pull. Uses 9/16 in. (1.4 cm) rotation resistant steel rope • Internally wired anti-two-block cable • 21 ft. 2 in. (6.4 m) span out-down outriggers with full and mid-span positions/charts. • 600 lb. (272 kg) capacity yoke-style pin-on work platform with hydraulic leveling system (boom or jib use) • USA federal bridge legal final weight on a tridem-axle chassis for convenient rental and transport between job sites. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

With a 5-section 142 ft. (43 m) main boom and optional 32 to 49 ft. (9.7 to 15 m) two-section jib, the 36142 offers a maximum tip height of 201 ft. (61 m).

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 3, 2016 • Page 55

2016 Ram 1500 Bay Bridge Cube

2017 1500 Laramie

Fall Special $41,513*

Fall Special $33,988*

Fall Special $44,162*

2016 Pro Master Ram 1500

2016 Ram 3500

2016 2500

w/Upfit Kits Included Valued at $4,760

with Flatbed

6.7L Diesel

Fall Special $30,417*

Fall Special $32,583*

Fall Special $54,398*

Crew Cab 4x4,

Must Finance Thru Chrysler Financing

2016 3500 w/Snow Removal Package Including 9’ Rugby and Hiniker Poly Scoop Plow Upfit Package Included Valued at $6750

2016 Tradesman 3500

2015 Ram 5500 Plow Ready

White Dually

w/11 1/2’ Stainless Steel Dump Body

Fall Special $59,148*

Fall Special $46,698*

Fall Special

#1 Chrysler Corp. Commercial Dealer in Minnesota

RAM H.D. HEADQUARTERS

The fast lane for small business.

If we don’t have it, we’ll build it for you!

Fury Ram Truck Center, Lake Elmo, Minnesota 651-777-1316 • Visit us at furymotors.com

18 Cabs and Chassis in Stock More Coming!

We Deliver! 32 Promasters Ready to Go!

* Pricing represents all Denver business center rebates deducted!

Page 56 • December 3, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Felling’s ‘Trailer for a Cause’ Raises $2,250 for Brain Tumor Association

AIS Construction Equipment Corporation www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Fax: 248-437-9750

Ditch Witch of North Dakota

Brenda Jennissen (L), Felling Trailers’ president/CEO, and Patrick Stepan of Sauk Center, Minn.

Felling Trailers concluded its 4th Annual Trailer for a Cause auction on Nov. 11th, by auctioning off one of its most popular trailers, the FT-3 drop deck utility trailer. The trailer has been painted “Brain Tumor gray” — Felling’s way to pay tribute to individuals affected by brain tumors. Tredit Tire generously donated the wheels and PPG Commercial Coatings donated the custom metallic grey paint for this trailer and cause. Anyone who has taken part in an online auction, knows that a lot can happen in the last few days, hours, minutes and even seconds. As the seven- day online auction of the Felling FT-3 utility trailer came to an end, this too was the case. With more than a dozen participating bidders watching the clock count down, Patrick Stepan placed the final bid. Stepan, a Sauk Centre native, won the auction with a bid of $2,250. Felling will donate100 percent of that winning bid to the American Brain Tumor Association (ABTA), which has a mission of understanding the treatment of brain tumors and improving and extending the lives of people impacted by a brain tumor diagnosis. The goal of Trailer for a Cause is to

help various non-profits through financial support and awareness. Making a Difference – One Trailer at a Time Felling Trailers is proud to have helped some of its favorite health-related non-profits through the annual charity trailer auction. To date, Felling Trailers has raised more than $9,000 through Trailer for a Cause. Here are some of the previous non-profits that Trailer for a Cause has supported: • Alzheimers — Act on Alzheimiers (2015) • Pancreatic Cancer —Pancreatic Cancer Action Network (2014) • Breast Cancer — Bright Pink Breast Cancer Awareness (2013) Learn more about the American Brain Tumor Association and its work at abta.org. For more information, visit felling.com/. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

Mankato, MN • 800-321-PLUS

www.toppersplus.com 1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 3, 2016 • Page 57

www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.westsidetractorsales.com 1400 W. Ogden Ave. Naperville, IL 630-355-7150

600 Walnut Ct Rockdale, IL 815-730-9011

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 708-331-6362

2170 South Yost Ave. Bloomington, IN 47403 812-333-9677 Fax: 812-333-9731

3021 South 460 East Lafayette, IN 47905 765-477-6933 Fax: 765-448-9038

3120 Congressional Parkway Fort Wayne, IN 46825 260-482-8576 Fax: 260-483-4057

25166 State Road 2 South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

3110 Prairie Rd. Rockford, IL 815-961-3160 1560 North Old Rand Rd. Wauconda, IL 847-526-7700

Page 58 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 59

A Authorized uthorized D Doosan oosan D Dealers ealers

INDIANA INDIANA

MICHIGAN MICHIGAN

NEBRASKA NEBR ASK A

S SOUTH OUTH DAKOTA DAKOTA

B&WE Equipment quipment

Carleton Ca arleton E Equipment quipment Co., Co., IInc. nc.

Bobcat Bobcat o off Om Omaha aha

D Diesel iesel M Machinery, achinery, IInc. nc.

FFort ort W Wayne ayne

C Chesterfield hesterfield

Omaha Omaha

Aberdeen Aberdeen

2 260-422-0945 60-422-0945 8 800-242-4819 00-242-4819

586-463-3333 586-463-3333

4 402-895-6660 02-895-6660 8 888-732-3198 88-732-3198

605-725-4364 605-725-4364 888-762-6312 888-762-6312

w www.bandwequipment.com w w.bandwequipment.com

R Ronson onson Equipment Equipment Co., Co., LL LLC C Lowell Lowell 2 219-696-5680 19-696-5680 d doosan.ronsonequipment.com oosan.ronsonequipment.com

G Grand rand R Rapids apids 6 616-877-3388 16-877-3388

Kalamazoo Kalamazoo 269-343-2943 269-343-2943 888 888-380-6420 -380-6420

w www.bobcatofomaha.com w w.bobcatofomaha.com

N NORTH OR T H D DAKOTA AKOTA Bobcat Bobcat o off Devils Devils LLake ake

Saginaw Saginaw

D Devils evils La Lake ke

989-777-6666 9 89-777-6666

701-662-5331 70 1-662-5331

Rapid Rapid City City 605-348-7438 605-348-7438 8 800-658-3047 00-658-3047

S Sioux ioux FFalls alls 605-336-0411 605-336-0411 800-456-4005 800-456-4005

w www.carletonequipment.com w w.carletonequipment.com

w www.goironhide.com w w.goironhide.com

w www.dieselmachinery.com w w.dieselmachiner y.com

M MINNESOTA INNESOTA

Bobcat Bobcat of of Grand Grand Forks Forks

WISCONSIN WISCONSIN

LLano ano EEquipment, quipment, IInc. nc.

G Grand rand FForks orks 701-772-5006 701-772-5006

S Swiderski widerski Equipment, Equipment, Inc. Inc.

IIOWA OWA B Brown’s rown’s Heavy Heavy E Equipment, quipment, IInc. nc. Am Ames es 515-232-8456 515-232-8456 800-723-5460 800-723-5460 w www.brownsheavyequipment.com w w.brownsheav yequipment.com

S Shakopee hakopee 9 952-445-6310 52-445-6310 8 877-753-6100 77-753-6100 w www.lanoequip.com w w.lanoequip.com

RTL RTL E Equipment, quipment, IInc. nc. G Grimes rimes 5 515-986-0262 15-986-0262 8 800-373-3916 00-373-3916

Swisher Swisher

Columbia Columbia 5 573-886-9435 73-886-9435

K KANSAS ANSAS C CSTK, STK, IInc. nc. K Kansas ansas City City

V Valley alley P Park ark 6 636-225-2900 36-225-2900 8 800-782-0854 00-782-0854 w www.bobcatofstl.com w w.bobcatofstl.com

7 715-675-2391 15-675-2391

701-572-5050 7 01-572-5050 w www.goironhide.com w w.goironhide.com

LLuby uby E Equipment quipment C Cape ape G Girardeau irardeau

KENTUCKY KENTUCK Y

6 636-343-9970 36-343-9970

OHIO OHIO Bo Bobcat bcat Enterprises, Enterprises, IInc. nc. H Hamilton amilton 513-874-8945 513-874-8945 8 800-4BOBCAT 00-4BOBC AT 614-876-1116 6 14-876-1116 8 800-4BOBCAT 00-4BOBC AT w www.bobcat-ent.com w w.bobcat-ent.com

5 573-334-9937 73-334-9937

FFenton enton w www.lubyequipment.com w w.lubyequipment.com

B Bowling owling gG Green reen 2 270-842-4253 70-842-4253 w www.bgbobcat.com w w.bgbobcat.com

Doosan ® and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2016 Doosan Construction Equipment. All rights reserved. | 49040-4

Mosinee Mosinee Thorp Thorp 7 715-669-5255 15-669-5255

Waupaca W aupaca

Reynoldsburg Reynoldsburg

9 913-371-0868 13-371-0868

Bobcat Bobcat o off Bo Bowling wling Green Green

Bobcat Bobcat o off Williston Willisto on

Bobcat Bo bcat of of St. St. Louis Louis

3 319-857-4045 19-857-4045 8 800-373-3916 00-373-3916 w www.rtlequipment.com w w.r tlequipment.com

7 715-623-4668 15-623-4668

Williston Williston

M MISSOURI ISSOURI

A Antigo ntigo

w www.goironhide.com w w.goironhide.com

G Gibson ibson M Machinery, a LLC C Cleveland lev 440-439-4000 440-4 8 800-843-1205 00-8 w www.gibsonmachinery.com w w.gibson

7 715-258-3266 15-258-3266

Wausau Wausau 7 715-623-4668 15-623-4668 www.swiderskiequipment.com w w w.swiderskiequipment.com

Page 60 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kenworth T680 Delivers 52nd U.S. Capitol Christmas Tree in December

This fall, a specially-decaled Kenworth T680 will transport the 52nd U.S. Capitol Christmas Tree on a special cross-country tour to the U.S. Capitol.

This fall, a specially-decaled Kenworth T680 transported the 52nd U.S. Capitol Christmas Tree on a special crosscountry tour to the U.S. Capitol. The tour visited 26 community celebrations during the 2,800-mi. journey. Upon its arrival and set-up on the West Lawn of the U.S. Capitol, the tree will be illuminated during a special ceremony in early December that will be presided over by U.S. Speaker of the House Paul Ryan. The 80-ft. Englemann Spruce was cut on Nov. 2 near McCall, Idaho, and placed on a trailer designed for the tree. Following the tree-cutting and send-off at the Payette National Forest Headquarters in McCall, the Kenworth T680 equipped with a 76-in. sleeper, PACCAR MX-13 engine, Eaton Fuller Advantage 10-speed automated transmission and Kenworth TruckTech+ hauled the tree to a community event in downtown McCall. The T680’s distinctive decal design features the tree and the U.S. Capitol beneath the words “From Tree to Shining Tree.” Gary Amoth, owner of Gary Amoth Trucking, will be the primary driver of the special T680. Gary Amoth Trucking and its new Kenworth T680 was chosen as the hauler for this year’s tree at the recommendation of local Kenworth dealer Kenworth Sales Co. and based on Amoth’s reputation in the trucking industry in Idaho, according to Bruce Ward, president of Choose Outdoors. Amoth, who started his trucking company hauling agricultural commodities with one truck in 1983, expanded the business into a Twin Falls, Idaho-based fullservice carrier with a fleet of more than 100 trucks hauling overseas containers for the drayage market, as well as flatbed and container freight. Choose Outdoors is a nonprofit organization that assists the U.S. Forest Service with

coordinating the annual tour. The T680 tour truck will be accompanied by the Great Big Idaho Potato Truck, a Kenworth T680 hauling a 6-ton, 28-ft. long replica of an Idaho russet potato. The Great Big Potato Truck was created in 2012 by the Idaho Potato Commission (bigidahopotato.com/the-truck). The hollow potato will carry some of the 8,000 ornaments Idaho school children and other residents crafted to adorn the tree and 70 other Christmas trees from the Payette National Forest. “It is an honor for Kenworth to participate in this event delivering the ‘The People’s Tree’ for the third year in a row,” said Kurt Swihart, Kenworth marketing director. “We’re especially proud that two Kenworth T680s will play key roles in completing this important tour, which offers Americans the opportunity to see this national symbol of celebration. Both trucks provide tour drivers comfortable work environments and their colorful and attractive graphics offer visitors at each stop a strong visual reminder of the origin of this year’s U.S. Capitol Christmas Tree.” The Capitol Christmas Tree Tour will make several stops in Idaho before continuing on through Utah, Colorado, Missouri, Kentucky, Tennessee, and Virginia. It arrives Nov. 27 at Joint Base Andrews in Maryland, where it will be uncrated and prepared for its final trip into Washington, D.C., the next day. For more information, including a complete tour schedule, visit the 2016 U.S. Capitol Christmas Tree website (www.capitolchristmastree.com), which is administrated and updated by Choose Outdoors. The public can track the truck’s progress at Trackthetree.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677 Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461

www.brookstractor.com Sun Prairie, WI 608/837-5141 Milwaukee, WI 414/462-9790 De Pere, WI 920/336-5711 West Salem, WI 608/786-2644 Plover, WI 715-254-2777 Coming 2016 Mt. Pleasant, WI

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 61

KEEP MATERIALS MOVING AND PROFITS FLOWING. Steep slopes, deep ruts, and slipper y muck are no match for the 370E, 410E, and 460E ADTs. With impressive power and torque for exceptional power-to-weight ratios and fast cycles, these trucks haul more for less cost per ton. The all-new Deere-designed cab is sealed and pressurized to keep out dust and noise, and the fully adjustable air-ride seat makes smooth sailing of any terrain. Remote park-brake release, rollover protection, and auto horn alerts ensure compliance on the strictest of jobsites. And an optional onboard-weighing system is calibrated to two-percent accuracy. Haul more for less — call us today.

www.nortrax.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Monico, WI 715/487-5583 Mosinee, WI 715/693-3820 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

Page 62 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 63

www.westsidetractorsales.com 7355 East 30th St. Indianapolis, IN 46219 317-544-3411 Fax: 317-544-3420

www.dieselmachinery.com

www.vlpco.com

4301 North Cliff Ave. Sioux Falls, SD 57104 888-753-8907

4100 Gardner Ave. Kansas City, MO 64120 800-878-9290 816-241-9290

39288 133rd St. Aberdeen, SD 57401 888-484-6312

Fort Wayne, IN 260-482-8576 Fax: 260-483-4057

3801 North Deadwood Ave. Rapid City, SD 57702 800-658-3047

Bloomington, IN 812-333-9677 Fax: 812-333-9731

Joplin 800-878-8223 417-781-8222 Springfield 800-955-2729 417-887-2729

LaFayette, IN 765-447-6933 Fax: 765-448-9038

Wichita 800-878-3346 316-838-3346

South Bend, IN 574-232-1461 Fax: 574-233-3324

Topeka 800-878-4345 785-267-4345 Garden City 800-511-1435 620-275-1996

www.brookstractor.com Sun Prairie 1900 W. Main St. P. O. Box 9 Sun Prairie, WI 53590 608- 837-5141 Fax: 608-837-4012 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414- 462-9790 Fax: 414-462-7242 De Pere 1031 Lawrence Dr. De Pere, WI 54115 920- 336-5711 Fax: 920-336-6405

West Salem 451 W. Avenue N. West Salem, WI 54669 608- 786-2644 Fax: 608-786-2206 Plover 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 Fax: 715-254-2799 Coming 2016 Mount Pleasant 1609 SE Frontage Rd. Mt. Pleasant, WI 53177

Bobcat of St. Louis 401 West Outer Road Valley Park, MO 63088 636-225-2900 1885 West Terra Lane O’Fallon, MO 63366 636-240-9020 9801 West State Route 161 Fairview Heights, IL 62208 618-397-1847 www.bobcatofstl.com Bobcat of Columbia 1101 N Lenway Drive Columbia, MO 65202 573-866-9436 www.columbiabobcat.com Bobcat of Marion 1417 Donna Drive Carterville, IL 62918 618-985-8920 www.bobcatofmarion.com Bobcat of Evansville 2934 Lynch Road Evansville, IN 47711 812-422-8200 www.bobcatofevansville.com

Page 64 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARTBA Launches New SCTPP Program • Astec Industries Executive Vice President and COO Rick Dorris; • HNTB Holdings Ltd. President Paul Yarossi; • ARTBA President and CEO Pete Ruane; and • ARTBA Executive Vice President and COO Bill Toohey. The ARTBA Transportation Development Foundation (ARTBA-TDF) engaged Professional Testing Inc., an internationally-recognized consulting firm specializing in helping industries and government agencies develop and manage effective, fair, valid, reliable and legally defensible assessment and evaluation services to work with industry safety leaders in developing the SCTPP program. It has been designed to meet the rigorous protocols required for accreditation by the American National Standards Institute (ANSI) and the International Organization for Standardization ISO/IEC 17024. Identification of the target audience, core competencies to be tested, and development of the exam questions themselves has involved key safety personnel from: Zachry Construction, Lane Construction, Granite Construction, the Kiewit Infrastructure Group, Oldcastle Materials, The Vecellio Group, Barriere Construction, Superior Construction, Liberty Mutual Insurance, the Arch Insurance Group, the Laborers’ Health & Safety Fund of North America, the Texas Department of Transportation, the National Institute for Occupational Safety & Health, Virginia Tech, The Center for Construction Research & Training, Plastic Safety Systems, InVia Pavement Technologies, and Mobile Barriers. The two-and-a-half hour SCTPP exam has up to 120 multiple-choice questions. They probe knowledge in assessing project risks, creating project safety plans, implementing and conducting on-going evaluation of a site-specific operational safety plan and conducting incident investigations. The ARTBA-TDF is now accepting applications for the exam, which will be administered nationwide at Pearson VUE testing centers, via the SCTPP website, www.puttingsafetyfirst.org. The test will be offered during three windows in 2017: (Jan. 16-Feb. 17, March 13-April 14 and Oct. 16.-Nov. 17). The application and exam fee is $500. To be eligible to sit for the exam, candidates must meet one of the following eligibility requirements: Option 1 1. Three years’ full-time or equivalent experience* in the transportation construction industry. 2. Completion of an OSHA 30 or 510 course. Option 2 1. Bachelor’s degree in engineering or construction management with two years’ experience* in the transportation construction industry. 2. Completion of an OSHA 30 or 510 course. Option 3 1. Associate or technical degree in safety with two years’ experience* in the transportation construction industry. *Experience is defined as a job classification including, but not limited to, laborer, operator, foreperson, superintendent, project manager, construction manager, engineer, safety professional, risk manager, inspector, surveyor, or estimator. Internships qualify as experience. Experience must be within five years of applying for certification. Upon passing the exam, the professional certification will be valid for three years. Recertification will require documented, continuing learning on the topic and retesting. To learn more about the SCTPP program and to access “FAQs” on it, visit www.puttingsafetyfirst.org, or contact ARTBA Senior Vice President of Safety & Education Brad Sant (bsant@artba.org) at 202/289-4434. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. GO WITH KOMAT With Komatsu CARE you can:

>>>>>

The American Road & Transportation Builders Association (ARTBA) has launched a groundbreaking professional certification program developed by safety leaders from some of the nation’s top transportation infrastructure firms, the insurance industry, organized labor and government. The “Safety Certification for Transportation Project Professionals” (SCTPP) program is aimed at the thousands of transportation project supervisors, foremen, inspectors, project planners and designers who could make a huge, industry-wide safety impact by learning core competencies necessary to identify and mitigate potentially life-threatening onsite risks. The SCTPP program also is intended to create a “safety benchmark” for all future civil engineering and construction management program graduates who are interested in employment with industry-leading firms. “Ensuring that our project sites are the safest possible environments for all who work in and travel through them can’t just be the safety director’s job,” said ARTBA Chairman David Zachry, president and CEO of the Zachry Corporation in San Antonio, Texas. “There are no safety ‘accidents.’ There are safety incidents. And we need to do our best to prevent them. It is our moral obligation and it is good business practice.” Zachry, who has been a driving force behind development of the SCTPP program, added: “Our goal, collectively working through ARTBA and its foundation, is to cause a demonstrable reduction in the number of deaths and injuries that occur on and around transportation project sites each year. We believe we can do that if all of the key decision makers, from project inception through completion, have safety top of mind. This program will identify and reward those who have demonstrated competency in this critical management area.” ARTBA recruited a high-level, independent certification commission to establish operational policies to guide the SCTPP program and provide leadership, governance and ongoing oversight. The nine-member commission is co-chaired by Ross Myers, CEO and chairman of Allan Myers Inc., the largest civil construction and materials supply firm in the MidAtlantic region, based in Pennsylvania, and David Walls, president and CEO of Austin Industries in Dallas, Texas, one of the nation’s largest diversified construction firms with an annual volume of $2 billion and over 7,000 employee-owners. Joining Walls and Myers as SCTPP commissioners are top leaders from the transportation project planning, design and materials sectors, government, organized labor, and the trucking and insurance industries. They are: • Deputy Secretary of the U.S. Department of Transportation Victor Mendez; • WSP│Parsons Brinckerhoff President and CEO of the U.S. Central & South America Greg Kelly; • Ash Grove President and COO Randy Vance; • Recently retired Texas Department of Transportation Occupational Safety & Health Director Jerral Wyer; • Laborers’ International Union of North America Training & Education Fund National Apprentice Director James Urtz; • Cargo Transporters Inc. Director of Safety Jerry Waddell; and • Liberty Mutual Insurance Group Technical Director of Risk Control Services Don Tolbert. Ex-officio, non-voting members of the commission include: • Zachry Corporation President and CEO David Zachry, who also is the 2016 ARTBA chairman;

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

TIER 4 INTERIM E

• Lower your cost of ownership MAINTENANCE B • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment

y Komatsu T CARE complim

To learn more e about

It’s just part of our Program Komatsu designed to deliver complete CARE contact your 3 years, plus 2 c service and support solutions to Komatsu customers. Komatsu distributor or scan

thisCARE QR code Komatsu

To learn more about with your contact your Komatsu distributor or scan smart phone. this QR code with your smart phone.

Lower your c

Increase equ

Protect the va

It’s just part of ou solutions to Kom

MIDWEST KOMATSU DISTRIBUTORS

W E S T K O M AT S U D I S T R I B U T

Berry Tractor & Equipment Bacon-Universal Company, Inc Company, Inc.. www.berrytractor.com KS Garden City 620-277-2290 • 877-469-1763 Topeka 785-266-9509 • 877-469-1763 Wichita 316-943-4246 • 877-469-1763 MO Springfield 417-831-2651 • 877-469-1763

Hilo 808-935-8595 800-352-3508 Honolulu 808-839-7202 800-352-3508 Kailua-Kona 808-326-1212 800-352-3508 Kauai (Lihue) 808-245-8472 800-352-3508

Soldotna 907-262-5977 800-254-5977 Wasilla 907-376-3838 800-973-2607

www.brandeismachinery.com IN Evansville 812-425-4491 Ft. Wayne 260-489-4551 Indianapolis 317-872-8410 KY Corbin 606-528-3700 Lexington 859-259-3456 Louisville 502-491-4000 Paducah 270-444-8390 Stanville 606-478-9201

Claremont Clar emont Equipment Co Co.. .clairemontequipment.com CA

Escondido 760-739-9100 Imperial 760-355-7700 San Diego 858-278-8351

Craig Taylor Equipment Cr Company ylorequipment.com

Oklahoma City 405-495-7820 800-375-3339 Tulsa 918-438-1700 800-375-3733 TX

Abilene 325-692-6334 877-577-5729 Amarillo 806-373-2826 800-283-1247 Dallas 214-371-7777 800-753-1247 Ft Worth 817-378-0600 877-851-9977 Lubbock 806-745-2112 866-289-6087

Komatsu Equipment Co. Co. tsueq.com

Anchorage 907-276-5050 800-279-5051 Fairbanks 907-452-1192 800-452-1192

Columbus Equipment Company www.columbusequipment.com OH Cadiz 740-942-8871 Cincinnati 513-771-3922 Columbus 614-443-6541 Dayton 937-879-3154 Massillon 330-833-2420 Painesville 440-352-0452 Perrysburg 419-872-7101 Piketon 740-289-3757 Richfield 330-659-6681 Zanesville 740-455-4036

Continental Equipment Corp. www.ceceq.com MI Lansing 517-321-8000 MI - Continental Equipment Corp. Service Branches Bridgeport 989-777-0090 • 989-777-1583 Lenox 586-727-7502 • 586-727-7311 New Hudson 248-437-8121 • 248-437-9750 Williamsburg 231-267-5060 • 231-267-5257

Hurric 435-9 Salt L 801-9 South 801-9

Kirb Kirby-Smith y-Smith Mac Machinery hinery Inc Inc.. WY

Brandeis Machinery & Supply Company Wailuku Maui 808-244-9158 800-352-3508

Elko 775-753-7561 North Las Vegas 702-399-1004 Reno 775-356-1334

Gillett 307-6 Rock S 307-6

Mode ID

Boise 208-3 800-2 Pocate 208-2 800-8 MT

Billing 406-2 800-7 Kalisp 406-7 800-4 Misso 406-5 800-3 OR

Eugen 541-6 800-8 Portla 971-2 800-9

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 65

Diesel Machinery, Inc. www.dieselmachinery.com SD Aberdeen 605-725-4364 • 888-762-6312 Rapid City 605-348-7438 • 800-658-3047 Sioux Falls 605-336-0411 • 800-456-4005

General Equipment & Supplies www.genequip.com ND Bismarck 701-223-9700 • 800-279-4437 Fargo 701-282-2662 • 800-437-2924 Minot 701-852-0479 • 800-852-0479 Williston 701-572-0570

Road Builders Machinery & Supply Co., Inc. www.roadbuildersmachinery.com KS Kansas City 913-371-3822 NE Grand Island 308-384-2620 Lincoln 402-325-0447 Omaha 402-331-9200

Road Machinery & Supplies Co. www.rmsequipment.com IA Cedar Rapids 319-363-9655 • 800-616-6615 Des Moines 515-282-0404 • 800-555-1445 Sioux City 712-252-0538 • 800-633-9104 IL Milan 309-787-1742 • 800-633-9114 MN Duluth 218-727-8611 Savage 952-895-9595 • 800-888-9515 Virginia 218-741-9011 • 800-752-4304

Roland Machinery Co. www.rolandmachinery.com IL Bolingbrook 630-739-7474 Carterville 618-985-3399 Marengo 815-923-4966 Springfield 217-789-7711 IN Portage 219-764-8080 MI Escanaba 906-786-6920 MO Bridgeton 314-291-1330 Cape Girardeau 573-334-5252 Columbia 573-814-0083 Palmyra 573-769-2056 WI DeForest 608-842-4151 DePere 920-532-0165 Eau Claire 715-874-5400 Franksville 262-835-2710 Schofield 715-355-9898

www.komatsuamerica.com/komatsu-care

Page 66 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CASH IN THE SAVINGS! R E B AT E S

BUCKET INCLUDED IN LEASING PRICES!

270 0V N XT2

LEASE AS LOW AS

$500/

$468/

MO.

LEASE AS LOW AS

$566/

MO.

$567/

MO.

CALL YOUR LOCAL OCAL DEALER FOR MORE DE DETAILS! TAILS! - OFFER ENDS DECEMBER 31, 2016 -

STAR EQUIPMENT LT D .

STAR EQUIPMENT LTD. 1401 2nd AvEnUE dES moInES, IA 50314 (515) 283-2215 FAx: (515) 283-0295 (800) 369-2215

2950 6TH STREET Sw cEdAR RAPIdS, IA 52404 (319) 365-5139 FAx: (319) 365-6726 (800) 728-5139

2625 w. AIRLInE Hwy. wATERLoo, IA 50703 (319) 236-6830 FAx: (319) 236-6834 (800) 791-9249

2100 E. LIncoLn wAy AmES, IA 50010 (515) 233-9500 FAx: (515) 233-9505 (866) 856-2312

www.STAREQUIP.com

REED COMPANY, LLC

TOP NOTCH EQUIPMENT, INC.

2738 FAUnA RoAd LEbo, KS 66856 (620) 256-6609 FAx: (620) 256-0288 www.REEdSALES.com JUncTIon US 24 & 99 Hwy wAmEgo, KS 66547 (785) 456-7333 FAx: (785) 456-6714

5505 HIgHwAy 169 n. PLymoUTH, mn 55442 (888) 824-6559 (763) 398-0079 FAx: (763) 551-7916 www.ToPnoTcHEQUIPmEnT.com

mustangmfg.com

*The rebate values displayed for the 2600R and 2700V NXT2 include a trade rebate of a competitive skid loader model. Rebates without trade are available for the 2600R and 2700V NXT2 skid loaders, at a reduced value. Offers expire 12/31/2016. Leasing offers are based on; 500 hr. usage /36mo., base unit, open ROPS, and Dual Hand controls for each model. Separately the 1900R includes; 10x16.5 8-Ply/Titan HD and 66”, 15.1 cu.ft. dirt construction bucket. The 2200R includes; 12x16.5 10-Ply/Titan HD and 70”,16.1 cu.ft. dirt/construction bucket. The 2600R includes; 12x16.5 10-Ply/Titan HD, 70” 16.1 cu.ft. dirt/construction bucket. The 2700V NXT2 includes; 12x16.5 10-Ply/Titan HD and 70”, 16.1 cu.ft. dirt/construction bucket. Available at eligible and participating authorized Mustang fer not available to government accounts, national accounts, and municipal/utility bid customers. Some restrictions apply. See dealer for more details. dealers in the United States and Canada. ada. Offfer acc Manitou Americas, Inc. reserves the right to extend or discontinue any of these programs at any time without notice.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 67

WE DO MORE THAN DESIGN EQUIPMENT.

WE POWER YOUR SUCCESS.

Whether you are looking for products with the llatest atest ttechnology echnolog y or you want to have your old machine rremanufactured, emanuffactured, Doosan Por table Power can help you achieve success. Focused on ccustomer ustomer ssatisfaction atisffaction and product solutions, our de dealer aler netw network ork is the largest nationwide network in the ind industr y.

CONTTACT YOUR LOCALL DEALER DEAL TODAY. Aspen Equipment Co.

McAllister Equipment Co.

www.aspenequipment.com 9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525 Omaha, NE (402) 894-9300

www.mcallisterequipment.com 150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 Alsip/Chicago, IL (708) 389-7700 E. Peoria, IL (309) 694-4455 Rockford, IL (815) 227-0555 Springfield, IL (217) 789-0351

DoosanPortablePower.com | 800.633.5206

Sa Sales. les. P Parts. arts. Service. Service.

Roland Machinery Co. www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764

DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151 Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Escanaba, MI (906) 786-6920

Central Power Systems & Services www.cpower.com 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231 Great Bend, KS (620) 792-1361 Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

Page 68 • December 3, 2016 • www.constructionequipmentguide.com • cOnstructIOn eQuIPMent guIDe

Manitou Americas Welcomes The Lilly Company to Its Dealership Network Manitou, manufacturer of all-terrain material handling equipment, welcomed The Lilly Company to the Manitou dealer network. The Lilly Company has 12 locations: Memphis, Kingsport, Knoxville and Jackson, Tenn.; Richland and Belden, Miss.; and Mobile, Dothan, Montgomery, Irondale, Madison and Birmingham, Ala. The Lilly Company will represent Manitou rough terrain vertical masted forklifts, semi-industrial vertical masted forklifts, truck mounted forklifts, multi-purpose telescopic handlers and construction telescopic handlers. “We look forward to building and growing this new partnership with The Lilly Company,” said Eric Burkhammer, Manitou Americas vice president of sales and marketing. “Given The Lilly Company’s large presence in the Southeast, we are confident that they will provide the excellent sales, service, and parts support that the Manitou brand is known for.”

IOWA ZIegler cAt Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

KentucKy Diamond equipment

Manitou, manufacturer of all-terrain material handling equipment, welcomed The Lilly Company to the Manitou dealer network.

For more information about The Lilly Company, visit www.lillyforklifts.com. For more information about Manitou, visit www.manitou.com or contact Manitou Americas at 262-334-

9461. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Firms Add 11,000 Jobs Construction employers added 11,000 jobs in October as employment in the sector is at the highest level since December 2008 despite declines in public sector investments in construction projects, according to an analysis by the Associated General Contractors of America. Association officials noted that average hourly earnings for construction workers increased by 3.2 percent compared to 12 months ago as firms continue to expand amid shortages of available qualified workers. “There is a two-part story in construction right now as private-sector demand continues to boost employment while declining public-sector demand is contributing to year-overyear declines in heavy and civil engineering construction,” said Ken Simonson, the association’s chief economist. “Overall construction employment would certainly be higher if local, state and federal officials were investing more to build new and repair aging infrastructure.” Construction employment totaled 6,679,000 in October, an increase of 11,000 from September and 195,000 or 3.0 percent from a year ago. The annual rate of increase in construction employment was nearly twice as fast as the 1.7 percent increase for total nonfarm payroll employment. There were 512,000 unemployed jobseekers in October who last worked in the construction industry, the lowest total for October in 10 years, Simonson added. Residential construction — comprising residential building and specialty trade contractors — added 4,500 jobs in October and 139,700, or 5.6 percent, compared to a year ago. Nonresidential construction — building, specialty trades, and heavy and civil engineering construction firms — added 6,700 jobs for the month and gained 55,000

employees compared to October 2015, a 1.4 percent rise. Construction employment is up year-over-year for all segments except heavy and civil engineering construction, which lost 1,200 jobs since October 2015 amid declining public-sector investments in construction. As the available supply of workers continues to shrink, average hourly earnings, a measure of wages and salaries for all workers, increased 3.2 percent in construction over the past year to $28.39 in October, nearly 10 percent more than for all nonfarm jobs, the economist noted. For the private nonfarm sector, earnings rose 2.8 percent over the past 12 months to $25.92. Association officials noted that private-sector demand for construction is more than offsetting declines in public-sector investments in infrastructure and other public works projects. They added however, that heavy and civil engineering firms likely have the capacity to meet any growth in publicsector demand. They urged Congress to pass a new water resources bill to finance upgrades to waterways and find permanent funding solutions for highway, transit and clean water improvements. “Even as many firms benefit from strong private-sector construction demand, firms that perform public-sector work continue to struggle with low demand,” said Stephen E. Sandherr, the association’s chief executive officer. “The one silver lining in this is that these firms have the capacity to meet any future growth in public-sector infrastructure investments.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.diamondequipment.com Bowling Green 270-781-1061

OhIO cAt www.OhioCAT.com Richwood 888-446-4658

MInnesOtA ZIegler cAt www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

MIchIgAn MIller-brADfOrD & rIsberg, Inc. www.miller-bradford.com Negaunee 800-562-9770

OhIO OhIO cAt www.OhioCAT.com Broadview Heights 800-837-6200 Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental) Oakwood Village 800-633-1020

WIscOnsIn MIller-brADfOrD & rIsberg, Inc www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

constructIon EquIpmEnt GuIdE • www.constructionequipmentguide.com • december 3, 2016 • page 69

IllInoIs dIamond EquIpmEnt www.diamondequipment.com Mt. Vernon 618-242-2273

WEst sIdE tractor salEs www.westsidetractorsales.com Naperville 630-355-7150 Rockdale 815-730-9011 Rockford 815-961-3160 South Holland 708-331-6362 Wauconda 847-526-7700

IndIana dIamond EquIpmEnt www.diamondequipment.com Evansville 812-425-4428

macallIstEr machInEry salEs/rEntals www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

HISTORY LESSON: Which compact grader has a 65+ year USA Heritage?

Page 70 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Manitou Americas Inc. Receives ‘Pillar of the Industry Award’ Honor CONTINENTAL EQUIPMENT CORP.

ROAD MACHINERY & SUPPLIES CO.

www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 517/321-4191 Fax

www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

BRANDEIS MACHINERY & SUPPLY COMPANY

(L-R) are Dennis Slater, president and secretary of AEM; Dan Miller, president and CEO, Manitou Americas Inc.; and Kip Eideberg, vice president public affairs of AEM.

The Association of Equipment Manufacturers (AEM) important to our customers and our employees that we stay honored Manitou Americas Inc. with its “Pillar of the informed on the agriculture and construction industry poliIndustry” award, reflecting Manitou Americas work to cies, to support issues for continual growth in our industry improve the business environment for the equipment manu- for the future.” facturing industry during this election year. The “I Make America” tour this year focused on educatManitou Americas Inc. has been recognized at AEM’s ing the men and women of the equipment manufacturing annual conference, held Nov. 16 to 18 industry about the issues that matter in California, for its efforts this year for manufacturers this election seato advocate for pro-manufacturing son. The campaign visited 35 AEM solutions to elected leaders and voters members throughout the year, many and for its participation in AEM’s “I times including a custom-painted Make America” grassroots program. truck equipped with a custom“AEM is proud to recognize designed interactive game to educate Manitou Americas for its efforts this players about election issues. year to champion equipment manuManitou Americas hosted the “I facturing issues during a contentious Make America” tour at its equipment election season,” said AEM President manufacturing facility in Madison, Dennis Slater. “The Pillar of the S.D., this year on Sept. 1. U.S. Sen. Industry Award is a fitting way to John Thune was in attendance and honor Manitou Americas for serving later spoke to the crowd as well as as a foundation of our industry.” Manitou Americas employees about To be eligible for AEM’s Pillar of the importance of policies that prothe Industry award, a member commote U.S. equipment manufacturing pany must meet a series of qualificaafter taking a tour of the Manitou tions that capture the many ways in Americas manufacturing facility. which manufacturers can advocate U.S. Sen. John Thune spoke to the crowd AEM formally honored the winwell as Manitou Americas employees ners of the “Pillar of the Industry” for industry issues. Pillar award win- as about the importance of policies that ners, for instance, may have hosted an promote U.S. equipment manufacturing awards at its annual conference in elected official at their facility, written after taking a tour of the Manitou Santa Barbara, Calif. The awards an op-ed on manufacturing issues for Americas manufacturing facility. coincide with the fifth anniversary their local newspaper, or host an “I for AEM’s successful “I Make Make America” event at their facility (among other criteria). America” campaign, AEM’s principal grassroots advocacy “We are very proud to receive the AEM Pillar Award for program which engages AEM member companies and their 2016 and to be a part of the advocacy to support and improve employees to become champions for the industry on manuAmerican manufacturing policies, in an effort to create and facturing issues. keep more jobs in the United States,” said Dan Miller, CEO (This story also can be found on Construction Equipment Manitou Americas and President, CEP Division. “It is Guide’s website at www.constructionequipmentguide.com.)

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

BERRY TRACTOR AND EQUIPMENT CO. www.berrytractor.com 930 S West St. Wichita, KS 67213 316/943-4246 1750 SW 41st St. Topkea, KS 66609 785/266-9509 3830 W Jones Ave Garden City, KS 67846 620/277-2290 2060 N West Bypass Springfield, MO 65803 417/831-2651

DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 71

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898

GENERAL EQUIPMENT & SUPPLIES, INC. www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

Page 72 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LiuGong-Dressta’s Menough Discusses Recent Merger By Giles Lambertson CEG CORRESPONDENT

Mergers are not unusual in the global construction equipment industry, and LiuGong-Dressta is a prime example of the blending process. As director of the merged company’s sales and marketing, Marcus Menough has the job of bringing together in the North American market the disparate parts of LiuGong and Dressta and growing the company’s market share. Menough knows a thing or two about moving heavy equipment. In a 17-year-career, he has sold Kobelco, Ingersoll Rand and Volvo construction products. In 2012, he jumped to LiuGong. “When I was with Volvo,” he said, “I ture. By 1995, the became familiar with Dresser nameplate Chinese wheel loadon the company’s ers and Chinese engiconstruction equipneering. I came to see ment had been what I believed were dropped in favor of many opportunities “Dressta.” Finally, for Chinese products in 2005, Komatsu in this market. The pulled out and company seemed Marcus Menough, direc- HSW assumed full really on track to tor of sales and market- responsibility for make an impact here ing, LiuGong-Dressta. the product line. in North America. This in turn set LiuGong is a large global brand the stage for the takeover of HSW and I took the opportunity to be a four years ago by Guangxi part of it.” LiuGong Machinery, which is LiuGong entered the North where we are today. Given this American market in 2008, estab- long and mixed pedigree of lishing its headquarters on the edge machinery, Menough was asked if of Houston in Katy, Texas. It current owners of the various genarrived just in time to watch equip- erations of IH, Dresser and Dressta ment markets collapse here and equipment should be concerned abroad. The company might have about parts and customer support. hunkered down to wait for an eco“Absolutely not. Many Dresser nomic recovery that, eight years machines are still running around later, still is problematic. Instead it in the market from decades ago looked to Poland in 2012 and and our goal is to support the full acquired the Dressta line of equip- manufacturing base and its local ment. That acquisition was a cul- parts suppliers,” he said. mination of 40 years of evolution To that end, he is working to for the Polish manufacturer. expand the dealer network in the HSW is Dressta’s foundation market — currently 13 dealers repcompany. Its roots in Stalowa resenting 70 locations. These Wola, Poland, go back to 1938. In include exclusively LiuGong deal1972, the manufacturer began ers as well as LiuGong-Dressta building crawler dozers and load- outlets. ers and pipelaying machinery for Menough was interviewed by International Harvester. Ten years Construction Equipment Guide later, Dresser — another U.S. firm while waiting in an airport. The — entered an agreement with sales director was traveling HSW. Six years after that, between San Diego, where Komatsu America joined the ven- LiuGong unveiled new Tier IV

Among the first products tested at LiuGong’s core research center in Liuzhou, China, were the Hseries wheel loaders. Auxiliary R&D units are located in Poland, India, Great Britain and the United States.

Final wheel loaders and excavators, and China, where a vertical-lift wheel loader was launched at a global dealer conference. The symbolism was unmistakable: This is a company on the move. Some of its progress is powered by a state-of-the-art R&D campus erected last year in Liuzhou, China. The complex encompasses 1 million sq. ft. (92,903 sq m) of research and testing centers with enough working space for 1,200 engineers. The facility is LiuGong’s core research center with auxiliary R&D units located in Poland, India, Great Britain and the United States. One of the first products tested at the center was the H-series wheel loaders. Other new models entering the market include SSeries hydrostatic dozers powered by Tier IV Final Cummins diesel engines. H-Series loaders and ESeries excavators introduced in October in San Diego have Cummins and Perkins Tier IV Final engines under their hoods. Tier III-equipped machines will continue to be sold into 2017, when engines with the latest emissions equipment will take over. CEG: LiuGong is introducing 20 new machinery models this year. Is that a typical year’s introduction or a noteworthy surge? Menough: It’s definitely a

LiuGong entered the North American market in 2008, establishing its headquarters on the edge of Houston in Katy, Texas.

surge. A lot of it is driven in this market by the Tier IV Final emissions requirements. All of the machines we are introducing here, 11 or 12 of them, are Tier IV Final. However, the new engineering facility in China is part of it, too. The center has been a catalyst for product introductions. CEG: From a customer’s point of view, what recommends the LiuGong-Dressta lineup of machinery? Menough: I think the biggest piece of it for a customer is on the Dressta side. Obviously, the heritage of Dressta goes back to International Harvester a hundred years ago. It has a long history of quality production of heavy equipment and solid partnerships with

dealers. On the LiuGong side is the manufacturing prowess of the Chinese. So customers get the best of both worlds: strong engineering in a full line of equipment and proven manufacturing power. One of the larger adjustments for LiuGong in all of this is being able to offer dozers. The big boys in the industry have a lineup that includes dozers. With Dressta, LiuGong has a full range of dozers from a 100-hp rental tractor to full-blown 500+-hp machines, including mining units. CEG: Has the merger gone well for the companies and their customers? Menough: The global transition has been good. Here in North America, the transition has been very good. We have consolidated several warehouses into one. Parts and service centers have been consolidated. CEG: Do most of the products in the North American market trace their lineage to Dressta or to LiuGong? Menough: Across the full range of machinery, it is mostly Dressta. Going back to International Harvester, the company has been in this market for more than a hundred years. Dressta is bigger and broader in terms of market offerings. But you also need to remember that LiuGong has 50 years of history, much of it in China. CEG: How about globally — what is the premier machine for the company in worldwide sales? Menough: Wheel loaders. The LiuGong line of wheel loaders is one of the largest in the world. It is always first or second in global sales. CEG: The LiuGong product lineup seems a little thin on skid steers. One 7,800-pound, 70horsepower model, the 385B, is offered. What are the company’s plans there? Menough: Actually there are multiple LiuGong skid steer models available, but they aren’t offered in North America yet. They will be coming here in 2017. They are being tested in the global marketplace and will have a full launch next year. see MENOUGH page 84

Pages 73-79

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Tips to Prep Your Wheel Loader for Winter Workloads Mike Stark, Doosan wheel loader product specialist, provides five tips to help you get the most out of your wheel loader this winter.

By Allison McNeal SPECIAL TO CEG

With winter quickly approaching, it is important to think about preparing your wheel loader for winter operation, specifically snow removal. Before the first snow arrives, it is important to ensure your wheel loader is properly maintained and prepared to push, lift and dump snow. Mike Stark, Doosan wheel loader product specialist, provides five tips to help you get the most out of your wheel loader this winter. 1. Review the manufacturer’s operation and maintenance manual. It may seem like common sense, but it can’t be overstated. Review your machine’s operation and maintenance manual for recommended intervals and a checklist of seasonal maintenance items, as well as oil and fluid

recommendations. Ideally, you and your wheel loader operators should request maintenance training and assistance from your local equipment dealer on proper techniques, and familiarize yourself with decals and key maintenance points on the machine. Your wheel loader operation and maintenance manual should instruct you on what machine components should be inspected regularly. They include the following: • Fluids and filters • Battery • Tire pressure • Heating and defrosting systems 2. Check fluids and filters. Colder temperatures can affect a wheel loader’s ability to run efficiently, especially if it does not have the proper engine oil. That is why it is important to match wheel loader fluids to the proper ambient temperatures. Most

wheel loader manufacturers recommend CJ4 engine oils to protect the machine’s vital engine components. “If you use incorrect diesel engine oil, it can cause costly damage to the machine’s internal components,” Stark said. “These components can become plugged, corroded and ultimately, not work efficiently. Make sure to refer to your owner’s manual for instructions on filling your machine at the recommended intervals with the appropriate fluid in the correct increments.” Also, verify the quality of fuel you are using from your provider, checking to make sure water and other contaminants are not present in your fuel. “Switching to a special winter-blend fuel — typically No. 1 and No. 2 diesel — can help you prepare for cold temperatures,” Stark see WINTERIZING page 74

Cool Down After Working Going through a cool down procedure after a shift is a good practice to follow, said Mike Stark, Doosan wheel loader product specialist. “If you’re working hard, even in very cold weather, everything heats up. If you let it cool down, it benefits the engine life. A lot of people immediately stop the machine when they are done working. Wait a few minutes before you shut off your engine.”

Page 74 • December 3, 2016 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Winterizing Wheel Loaders Optimizes Performance WINTERIZING from page 73

said. “Investing in quality fuel that is blended appropriately for the climate and season may give you better peace of mind, lower your consumption, provide fewer filter changes and deliver long component life. “It’s a good idea to top off the diesel tank at the end of the day or shift,” he said. “Overall, it’s a good practice to follow yearround. It reduces the air in the tank. The wheel loader heats up during the day. When the operator turns it off, it cools down, and no matter what, you start getting condensation in the tank.” Another item to consider is the type of aftertreatment system, especially those machines equipped with selective catalytic reduction (SCR) meet Tier IV emission standards. SCR components require diesel exhaust fluid (DEF). This aqueous solution is susceptible to variations in hot and cold temperatures. “In very cold temperatures, DEF can freeze so wheel loader owners should make sure they keep DEF in storage during the winter months,” Stark said. “Purity and concentration are critical with DEF, so make sure to work with a local dealer to better understand how to store and handle DEF.” Stark also recommends to inspect the air

filtration system and to always use the correct replacement filter to reduce the risk of premature engine failure. 3. Inspect tires, batteries and components. Winter maintenance also means checking the tires, batteries and other wheel loader components before using or storing the machine. Undetected leaks or improper inflation can lead to premature wear and potentially tire failure over time. “Low tire pressure can decrease push capabilities, which is not ideal for snow removal applications,” Stark said. “Using L3 radial tires may be best during winter because they provide good traction in snowy conditions. Inflating tires with Nitrogen gas is a good alternative to assist in maintaining proper tire pressure.” He recommends all contractors and their operators become familiar with the manufacturer’s operation and maintenance manual for proper psi and inflate the tires accordingly. Before cold weather hits, it also is important to inspect the wheel loader’s battery and charge it if needed. “There is always a draw on the battery, so unless the battery has been maintained or disconnected while stored, it will slowly run

down and will need to be charged before use,” Stark said. For batteries that need to be charged, a trickle charger can be connected to help build the voltage at a slower rate, improving the battery life. Battery connections should also be inspected and cleaned at this time. Corroded terminals can cause hard starting and charging issues. Additionally, check the cab door and window seals to ensure there are no leaks or cracks, and install a new windshield wiper blade and add low-temperature washer fluid. Be sure to replace any burnt-out bulbs to ensure your operators have the appropriate lighting when working in low light or at night. 4. Store the wheel loader inside. Cold weather requires batteries to generate nearly twice as many cranking amps in order to turn over. If possible, in extreme cold, when the temperature falls below zero degrees Fahrenheit, keep your wheel loader in a heated facility; it’s easier on the machine. “If owners are not able to keep wheel loaders inside, it is important to park the machine out of the wind,” Stark said. “It is also advantageous to keep the equipment out of direct sunlight, if possible.”

If you are unable to keep your wheel loader inside a building, at least plug in the block heater; available as an option. A block heater will help keep the machine’s engine warm, making it easier to start while reducing wear on engine components. If you do not have a block heater, consider purchasing and installing one in fall. 5. Prepare attachments. Wheel loaders are valuable fleet assets during winter for a number of reasons, but one of the most prominent is their ability to be fitted with application-specific attachments which can be made easier with the use of optional quick couplers. Attachments such as quick couplers, buckets, pallet forks and snow pushers deserve the same attention as the machine to which it is connected. Perform visual checks of attachment components such as hoses, cylinders, guards, and cutting edges for damage. Make sure snow pusher attachments interfacing with a bucket are properly secured with chains. By following these five tips, you can be better prepared to tackle snow piles and help keep your machine running strong all winter. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Boss Expands Fleet With Heavy Duty Plow, VBX 6500 Spreader

Designed for medium-duty trucks, the new Boss Snowplow 9 ft. (2.7 m) heavyduty straight-blade plow features a reinforced moldboard and enhanced blade curl to power through deep, wet snow during the toughest of winter storms. The municipal-grade heavy-duty plow allows the user to punch through hard-packed banks with power and performance, according to the

manufacturer. “Increasing blade rigidity is the backbone to the creation of the Boss heavy-duty plow,” said Mark Klossner, marketing vice president of Boss Snowplow. “This new plow is designed for municipalities and comes with six trip springs and two shock absorbers, making it completely durable, long-lasting and strong to take Mother Nature’s toughest hits.” The 9 ft. heavy-duty straight-blade comes standard with the Boss SmartLight 3 LED with ice shield technology built for the snowplow professional, and also is equipped with the Boss heavy duty undercarriage and SmartHitch 2 attachment system for quick and easy attachment. VBX 6500 Spreader Boss Snowplow also is expanding its VBX spreader product line this year with the addition

With a 1.5-cu.-yd. (1.1 cu m) capacity, the Boss VBX 6500 is built with a stainless steel drive train and weatherproof components for reduced maintenance and longer life.

of the VBX 6500. The VBX 6500 features models with both auger and pintle feeds, powerful electric motors, standard worklights, easyto-use controls and the flexibility to spread a variety of deicing materials. “The VBX 6500 is a natural extension of our spreader product line,” said Klossner. “Ice control is key for professionals, and we’re continuing to develop spreaders and products that deliver advanced features and functionalities.” With a 1.5-cu.-yd. (1.1 cu m) capacity, the Boss VBX 6500 is built with a stainless steel drive train and weatherproof components for reduced maintenance and longer life. The LCD display controller is backlit and features dual motor control for quick adjustments on the fly. A rear-mounted dump switch allows operators to quickly dispose of the remaining materials at the end of the day. For more information, call 800/286-4155 or visit www.bossplow.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 3, 2016 • Page 75

PROFITABILITY

n e v i r D

TRUCK UTILITIES 2370 English St., St. Paul, MN 55109 651-484-3305 800-869-1075 2770 5th Ave S., Fargo, ND 58103 701-241-9411 800-972-9250 www.truckutilities.com

TRIP-EDGE

C-PLOWS

Torsion-Trip V-Plow TRIP-EDGE

No matter what the conditions, Hiniker professional grade snowplows are ready to help you reach new levels of productivity and performance!

SCOOP PLOWS

V-PLOWS: Trip-edge designs give smooth operation and effective protection. Double acting cylinders provide positive moldboard position control.

FULL-TRIP

CONVENTIONAL PLOWS

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks.

NORTH CENTRAL TRUCK & EQUIPMENT 2629 Clearwater Road St. Cloud, MN 56301 732 30th Avenue SE Minneapolis, MN 55414 877-485-9595 www.northcentralinc.com

SCOOP PLOWS: High capacity concave shape captures snow to efficiently clear large lots and parking areas. Angles left or right for conventional plowing. CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

TRIP-EDGE

CONVENTIONAL PLOWS

SPREADERS: Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Long-lasting stainless steel construction. Choose between OHV gas engine or dual-motor electric hopper spreaders, or new stainless steel tailgate spreader models! TAILGATE SPREADERS

HINIKER COMPANY 1-800-433-5620 s www.hiniker.com

S.E. Minnesota’s Automotive Aftermarket Experts

TRUCKIN’ AMERICA 4720 Hwy. 52 N. Rochester, MN 55901 800-556-4720 507-285-9855 www.truckinamerica.com

Page 76 • December 3, 2016 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Crysteel Truck Equipment 52248 Ember Rd. Lake Crystal, MN 56055 507-726-6041 800-722-0588 Fax: 507-726-2984 1130 73rd Ave. N.E. Fridley, MN 55432 763-571-1902 800-795-1280 www.crysteeltruck.com

Cannon Truck Equipment 51761 Danview Technology Court Shelby Twp., MI 48315 586-991-0054 Fax: 586-991-0074 www.cannonequip.com

Plow Truck Sale

1999 Freightliner FL80, Unit# 122464, Engine Caterpillar 3126B 275, Transmission MD3066P..................$42,000

2001 Sterling L7500, Unit# 498084, Engine Caterpillar 3126B 275, Transmission MD3560P........................................$41,900

2000 Sterling L8511, Unit# 497812, Engine Caterpillar 3126 250, Transmission MD3560P........................................$46,900

2000 GMC C8500, Unit# 500466, Engine Caterpillar 3126B 210, Transmission MD3060P........................................$17,500

2002 Sterling L8511, Unit# 517728, Engine Cummins 8.3L 285, Transmission MD3060P........................................$44,900

2003 Sterling LT9500, Unit# 500145, Engine Caterpillar C12 380, Transmission AutoShift ........................................$39,900

2000 Sterling L8511, Unit# 273187, Engine Caterpillar 3126 250, Transmission MD3560P........................................$46,900

2000 Sterling LT9511, Unit# 499459, Engine Cummins ISM 280, Transmission RTO14908LL ..................................$45,900

2000 Sterling L7500, Unit# 521942, Engine Caterpillar 3126B 300, Transmission MD3560P........................................$41,900

2002 International 2574, Unit# 526695, Cummins ISM 280 Engine, Transmission RTO14908LL ..................................$28,000

11152 Courthouse Blvd Inver Grove Heights, MN 55077 651-455-9775 www.istatetruck.com

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 3, 2016 • Page 77

Page 78 • December 3, 2016 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 3, 2016 • Page 79

IT’S A BLACK AND WHITE DECISION.

www.hlasnow.com

1.866.567.4162

Page 80 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

KOBELCO-USA.COM

Grand Equipment Co. 3310 Hudson Trails Dr. Hudsonville, MI 49426 616-896-7700 Fax: 616-896-6700 www.grandequipment.com

Southeastern Equipment Co., Inc. Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303 1356 3rd Street Brilliant, OH 43913 740-598-3400 1500 Industrial Parkway Brunswick, OH 44212 330-225-6511

Mid Country Machinery 3478 5th Ave S Fort Dodge, IA 50501 800-206-5936 4734 Sergeant Road Waterloo, IA 50701 319-234-8710 106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

2841 Verona Rd. • Verona, KY 41092 (859) 485-8500 • Fax: (859) 485-8573 www.newmantractor.com

EMPLOYMENT OPPORTUNITY

6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910 3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479 8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

404 Breaden Rd. Monroe, OH 45050 513-539-9214 6415 Promler Ave. N. Canton, OH 44720 330-494-3950

POWER YOUR FUTURE WITH DEUTZ

DeForest, WI 608-222-9191

27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331

DEUTZ Power Center Midwest is expanding its reach!

Eau Claire, WI 715-832-3443

7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321

Immediate Full Time Opportunities:

De Pere, WI 920-338-5800

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Marathon, WI 715-443-6000

4951 West 96th St. Indianapolis, IN 46268 317-872-4877

Chicago, IL: District Sales Manager North Kansas City, MO: Production Supervisor Warranty Administrator St. Louis, MO: District Sales Manager Parts Logistics Specialist Shop Service Technician

Generous Benefits 401k Match Competitive Pay Apply Immediately:

deutzamericas.com/ employment

Negaunee, MI 906-475-4181 www.miller-bradford.com

1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 81

Blue Ridge Tractor

Illinois Truck & Equipment Co.

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 82 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.

DELIVERING SUCCESS TOGETHER

RTL Equipment Inc. (RT-T-HC/CC-AT) www.rtlequipment.com 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267

Contact our distributors and find out how we can help improve your bottom line.

Custom Truck & Equipment (RT-T-HC/CC-AT-BT) 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

For Your Local Terex Dealer, Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

1321 Highway 965 Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

Authorized Terex Cranes Distributors © Terex Cranes 2016 · Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 83

Howell Tractor www.howelltractor.com 480 Blaine Street • Gary, IN 46406 800/852-8816 Fax: 219/977-4220

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Custom Truck & Equipment www.cte-equipment.com 7701 E. 24 Highway • Kansas City, MO 64125 800/861-1065 • 816/241-4888 Fax: 816/241-8826

General Equipment & Supplies, Inc. www.genequip.com 4600 Valley Industry Blvd. S. • Shakopee, MN 55379 800/966-1455 Fax: 952/224-1570 3901 N. Lewis Ave. • Sioux Falls, SD 57104 605/336-9000 Fax: 605/336-0073

Grand Equipment Company www.grandequipment.com 3310 Hudson Trail Dr. • Hudsonville, MI 49426 616/896-7700 Fax: 616/896-6700

Construction Machinery Company www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 Fax: 502/261-9251 2235 Ragu Drive • Owensboro, KY 42303 270/683-2000 • 877/683-2262 Fax: 270/683-3727 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661 Fax: 502/732-8355

Kelbe Brothers Equipment Co., Inc. www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 Fax: 608/221-0610 3101 French Rd. • DePere, WI 54115 920/343-6496 Fax: 920/343-6449

Reed Company, LLC www.reedsales.com 2738 Fauna Road • Lebo, KS 66856 620/256-6609 Fax: 620/256-0288 Junction US 24 & 99 Hwy • Wamego, KS 66547 785/456-7333 Fax: 785/456-6714

Page 84 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Menough Discusses Merger, New Equipment, Modifications, Market MENOUGH from page 72

CEG: Is LiuGong keying off one competitor or another in its North America marketing? Menough: No, we’re not keying off competitors. With the incorporation of the Dressta dozers, we have separated ourselves from competitors that don’t offer dozers. We are relatively new in the North American market and are working to expand our position here, but our real emphasis is on being a global player. In Asia, we have a much larger presence and want to establish that here. CEG: Is this a good time to be in an expansion mode? Is the market about to take off or is it still in a holding pattern? Menough: Well, that’s a great question. LiuGong has been in this market since 2008. Our plan has been to get established while things are a little slow and get ready to grow when things start moving faster. The markets have rebounded from 2008, of course, though they are not quite back to the pre-recession level. We have been looking for a one or two percent annual increase, year to year, over the next five years. By 2020, the market should be back and we should be in a much better position. CEG: Have your projections of growth changed any following the election of Donald Trump, whose administration is apt to depart more from the policies of the current administration than might have a Clinton administration? Menough: Yes, they’ve changed. I don’t have any numbers to share, but the positive outlook from the market as well as statements about new investment in infrastructure are encouraging. CEG: Is growth expected to come first in one or another part of North America?

American State Equipment Co. Inc.

Aspen Equipment Company

www.amstate.com 2055 South 108th Street Milwaukee, WI 53227 414/541-8700 2400 North 14th Avenue Wausau, WI 54401 800/242-7113 13915 Lake Drive Columbus, MN 55025 651/464-0996 2385 Becks Road Duluth, MN 55810 218/260-0581

www.aspenequipment.com 1525 S.E. Cortina Dr. Ankeny, IA 50021 515/965-1000 Fax: 515-965-1790 11475 S. 153rd St. Omaha, NE 68138 402/894-9300 Fax: 402-894-9302

Cleveland Crane & Shovel Sales, Inc. Kirby Smith Machinery Inc. Dressta ‘S Series’ dozers are equipped with Rexroth dual path hydrostatic drive systems that transmit full power to both tracks in all conditions to ensure smooth speed changes, pivot turns and counter rotation.

Dressta compact crawler dozers feature a 6-way C-Frame, with an undercarriage that is available in two options: the standard LT (Long Track) version for better stability during forward driving and leveling, and the LGP (Low Ground Pressure) version for use in swampy and muddy terrain.

Menough: We are experiencing real growth along the Eastern corridor and in the Southeast. The Southeast was one of the first areas to go into the recession and last to come out, but it is going strong right now. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

According to the company, Dressta’s TD-8S and TD-9S have been designed to ensure the operator retains maximum productivity. For optimal visibility, enlarged side door windows and a sloped engine hood allows for a better view of the blade front and corners.

12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300 • 877/851-5729

Walter Payton Power Equipment LLC www.wppecrane.com 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260 2832 Fitzgerald Rd. Louisville, KY 40216 877/847-3434 920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 3400 Claremont Avenue Evansville, IN 47712 812/422-6912 Fax: 812/422-6982

www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 800/352-2757 Fax: 952/884-2293

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 85

LIFT CAPACITY APACIT Y ADVANTAGE AN NTAGE

U UP PT TO O

UP TO

23%*

47% 47 %* MORE MORE

Compared to GMK5150L L competition

Co Compared m p ar e d to to GMK5150 GMK5150 competition competition

*Preliminary load charts, on radius adius with maximum counterweight counterweight

ANY LIFT. ANYWHERE. The strength and mobility to handle more jobs. The new GMK5150 and GMK5150L deliver great ROI due to outstanding lifting capacities and greater jobsite accessibility.

NEW GMK5150 and GMK5150L Class-leading lifting capacities in ounterweight full and taxi counterw counterweight configurations High-performing boom GMK5150L High-performing 11,6 t with 60 m capable of lifting 11,6 or tower tower crane boom — ideal ffor rigging GMK5150 with 51 m boom

•150 t maximum capacity •Narrow 2,75 m width on 445/95R25 tires •Fuel-efficient single-engine design

Compact dimensions with rreduced educed ov erall length and width overall

Impressive lifting, jobsite maneuverability and fuel efficiency help you achieve greater profits.

Control System Crane Control System (CCS) (CCS) with Boom Configurator enhances control and efficiency operator control

Contact your local Grove dealer, or go to www.manitowoccranes.com to learn more.

Easy operator access on the crane for secure, secure, fast rigging; especially for when working at heights

Page 86 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MACHINES THAT MAKE DEADLINES WEAK IN THE KNEES.

UP TO $500,000 BACK ON TAXES. RELIABILITY JUST TOOK ON A WHOLE NEW MEANING.

Martin Implement Sales, Inc. www.martinimplement.com 18405 115th Avenue Orland Park, IL 60467 708/349-8430 Fax 708/349-4230

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650 Fax 815/464-6951

Section 179 of the tax code allows businesses to deduct the full purchase price (up to $500,000) from their gross income if they buy Kubota equipment and place it in service by the end of the year. This is a great incentive to get your hands on great engineering.

1st Choice Equipment LLC www.1stchoiceequipment.com 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Lano Equipment, Inc.

ABC Equipment

www.lanoequip.com

www.abcequipment.com

Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

Corcoran, MN 888/479-4342 763/479-8200

* See Section 179 of the IRS tax code for details. Applies to qualifying equipment purchased and put into service in 2016. Information shown should not be construed as tax advice or a promise of potential savings. See your tax advisor for more information regarding your specifi c situation. Optional equipment may be shown. © Kubota Tractor Corporation, 2016.

Kubota.com/Construction

29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 38525 Chester Rd. Avon, OH 44011 440/934-7368

Southeastern Equipment Co., Inc. www.southeasternequip.com 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868 4951 West 96th Street Indianapolis, IN 46268 317/872-4877

Pages 87-102

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Terex|Finlay Launches New Models at Customer Open Day Terex|Finlay, recently hosted an Americas customer open day in San Antonio, Texas. In addition to U.S., South American and Canadian-based visitors, there also was an international flavor with customers and dealers in attendance from Ireland and Russia. The event and product demonstration were hosted by Martin Marietta at Rio Medina Quarry, just outside San Antonio. Terex|Finlay unveiled three new machines at the event. These were the first production models to reach American shores. • I-140 impact crusher • C-1540 cone crusher • 674 inclined screener The onsite demonstrations featured eight Terex|Finlay machines in three working demonstration zones and one machine on static display. The full machine line and demonstrations were structured as follows: • Demonstration 1 featured the new I-140 impact crusher feeding into the mammoth 893 heavy-duty forward-facing screen. Crowds gather for the demonstration • Demonstration 2 — the new I-140 impact crusher. headline act — incorporated the J-1170 jaw crusher, new C- day out and judging by the feed1540 cone crusher and new 674 back that we have received on the inclined screen. new product launches we are defi• Demonstration 3 featured the nitely on the right track with our mid-sized 873 heavy duty forward new product development initiafacing screen. tives. To our hosts, Martin “It was a huge pleasure to wel- Marietta, Medina, thank you so come so many customers to yet much. Working with you was a another successful Terex|Finlay pleasure from start to finish, and Americas open day,” said Keith we feel so honored to have had McCann, Americas sales director. access to such a great site. Thank “Our new product developments you for making our open day, the this [calendar] year have been success of the event was in large unprecedented. We place a lot of part due to you guys and your emphasis on listening to what our committed colleagues.” customers tell us they want and Additional details on the need from their equipment day in machines on display:

Martin Marietta hosted demonstrations at Rio Medina Quarry, San Antonio, Texas, featuring eight Terex|Finlay machines in three working demonstration zones.

Terex|Finlay I-140 Impact Crusher The Terex|Finlay I-140 shapes the future through innovation. According to the company, this new generation impact crusher gives improved material flow and production capabilities in quarrying, of the mining, demolition and recycling applications.

Incorporating the Terex CR032 impact chamber with direct drive and advanced electronic control system the machine provides operators with high material reduction ratios and produces a consistent product shape. The high productivity, ease of maintenance and operation makes the machine an ideal solution for large-scale producers and contact crushing operators. Key features:

The Terex|Finlay C-1540 cone crusher features the Terex 1000 cone crusher that is choke fed with integrated level sensor, automatic tramp relief and hydraulic closed side setting (CSS) adjustment.

• The ease of material flow through the machine has greatly improved, according to the company. • Each component increases in width as the material moves through the machine. • Fully hydraulic assisted apron setting features makes adjustment of the aprons convenient and efficient. • Heavy-duty vibrating feeder (VGF) with integral pre-screen removes dirt fines and sizes bypass material for reprocessing. • Optional under crusher vibratory plate feeder with wear resistant liners aids material discharge flow. Terex|Finlay C-1540 Cone Crusher The fuel efficient direct drive Terex|Finlay C-1540 cone crusher is the optimum machine for medium sized producers and contract crushing operators, according to the company. This efficient and productive machine features the Terex 1000 cone crusher that is choke fed with integrated level sensor, automatic tramp relief and hydraulic closed side setting (CSS) adjustment. The large hopper/feeder has an automated metal detection and a purge system to protect the cone and reduce downtime by removing metal contaminants via the purge chute. According to the company, additional benefits include, rapid set up time, ease of maintenance, high reduction ratio, high output capacity and advanced electronic control system. Key features: • Fuel efficient direct drive transmission via a clutch. • Hydraulic Tramp Relief System with automatic reset protects the chamber and minimizes downtime. see CRUSHER page 88

Page 88 • December 3, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Customers Have First Look at New Terex|Finlay Equipment CRUSHER from page 87

• Metal detection system on feed belt with “auto-stop” protects the cone from tramp metal and the purge system removes contaminants from the machine. • Advanced load sensing auxiliary hydraulics maximizes plant efficiency Terex|Finlay 674 Inclined Screen The Terex|Finlay 674 is a compact, easily transportable machine that offers operators rapid set up and tear down times, according to the company. The screenbox features three decks, giving a large screening area to provide efficient screening even at small fractions and high capacity. The screenbox features quick wedge tensioning, access holes and bottom deck hydraulic tensioning system to reduce time required for mesh changes. All four discharge conveyors are adjustable and hydraulically fold for transport. The fourth product “oversize plus” conveyor has variable tilt and side slew to discharge material for recirculation and stockpiling. Key features: • Triple deck screen with galvanized all round fixed catwalk access for ease of operation and maintenance. • The fourth (oversize plus) conveyor provides variable tilt and slew capability to discharge materials for recirculation to crushers or for stockpiling. • Maximum utilization of the three decks provides screening capabilities even at small aggregate sizes. • Updated hopper and belt feeder gives improved material flow onto main conveyor. Terex|Finlay 893 Heavy Duty Screen According to the company, the Terex|Finlay 893 is a highly-versatile and aggressive machine engineered and built for working in large-scale quarrying, mining, construction and demolition debris, topsoil, recycling, sand, gravel, coal, ore and aggregate applications. The plant has the capacity to process at a rate of up to 882 tons (800 t) per hour and can be fed

either by a tracked mobile crusher, shovel or an excavator. Depending on the application the working angle of the screenbox can be hydraulically adjusted to between 14 and 18 degrees. A key feature of the machine is the capability to change the working angle of the hopper/feeder. The working position can be lowered so that it can work with a mobile crusher. The hopper/feeder working

Customers and dealers from the United States, South America, Canada, Ireland and Russia visited San Antonio, Texas, for the Terex|Finlay event.

the feed material. The fines material can be discharged from the machine using the optional on-board by-pass conveyor or reintroduced onto the main product conveyor. According to the company, both methods improve the overall plant capacity, product flexibility and liner wear reduction. In applications where pre-screening of the feed material is not required the module can be hydraulically repositioned beneath the hopper/feeder. This provides a more compact working envelope as the feeder/hopper can be hydraulically adjusted to feed directly into the cone chamber. Key features: • Terex TC1150 cone crusher provides high reduction and productivity ratios and gives excellent

Guests had a close up view of how the machines work together to crush, screen and recycle materials.

position can be raised to provide a reduced feeder angle when operated in direct mode from an excavator or shovel. The screenbox top deck can be fitted with a variety of screening media including mesh, punch plate, bofar bars and tines. The bottom deck can be fitted with mesh, punch plate and cascade fingers. This fully self-contained plant can be hydraulically folded and ready for transport in less than 30 minutes, according to the company, making it the ideal machine for large-scale contract screening projects where a highly productive and dependable screen is paramount. Key features: • Versatile screen box can be adapted to suit many applications. • Modular configuration screen box with 20 ft. (6.1 m) by 6 ft. (1.83 m) top deck and 18 ft. (5.5 m) by 6 ft. bottom deck screen. • Screen box angle can be hydraulically adjusted to an angle between 14 and 18 degrees. • Screen box discharge end can be hydraulically raised 24 in. (61 cm) to facilitate media access and changing. • All stockpiling conveyors are hydraulic angle adjustable with hydraulic extending head sections for maximum discharge and stock-

pile height. • Apron feeder angle adjustable, lower position to accommodate crusher feed, high position provides reduced feeder incline angle when operated in direct feed mode from excavator/loader Terex|Finlay 873 Heavy Duty Screen The Terex|Finlay 873 is suited to working in aggregates, sand and gravel, top soil, construction demolition and recycling applications. This machine can be fed either by a tracked mobile crusher, shovel or an excavator and has the capacity to process at a rate of up to 496 tons (450 t) per hour. This machine is now available with dual power technology option. On-board electrical motors allow flexibility to run from an outside power supply or standard onboard engine. Key features: • Screen box angle can be hydraulically adjusted to an angle between 13 and 19 degrees. • Screen box discharge end raises hydraulically 20 in. (50 cm) to facilitate mesh changing. • Screen box can accept punch plate, cascade fingers, bofar bars and speedharps. • Galvanized access catwalk on both side of screen.

The demonstration at Rio Medina Quarry allowed guests to view the latest new machines offered by Terex|Finlay.

• Oversize conveyor angle can be adjusted from 18 to 24 degrees. • 4 ft. (1.2 m) wide belt feeder complete with 9 cu. yd. (7 cu m) manual folding hopper. Terex|Finlay C-1545P Cone Crusher The Terex|Finlay C-1545P incorporates the Terex 1150 cone crusher driven through by direct clutch drive with variable speed, automatic tramp relief and hydraulic closed side setting (CSS) adjustment. The machine features an onboard forward facing prescreen module with a 7 ft. (2.1 m) by 5 ft. (1.52 m) single deck screen for removal or bypass of fines from

product cubicity, according to the company. • The forward facing pre-screen module maximizes production and reduces wear on the chamber by removing fine materials before it enters the cone. • The large hopper/feeder on the plant has an automated metal detection system to protect the cone and reduce downtime. • The pre-screen module can be used to produce a road-base product from the on-board side conveyor. For more information, visit www.terexfinlay.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 3, 2016 • Page 89

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

Metso’s Lokotrack® LT106™ jaw crusher: Meeting your demands for high capacity with maximum efficiency That’s how we make the big difference, the Metso Way. Improve the efficiency and profitability of your crushing operation with the redesigned Lokotrack® LT106™ jaw plant. New features, including a radial side conveyor, high inertia flywheels, and an IC700™ process control system, ensure high productivity, user-friendly operation, and good mobility in tough crushing applications. The LT106 is also available with Metso’s Fleet Management technology, providing remote monitoring of functions, parameters, and location for more efficient operation.

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. • Eau Claire, WI 54701 715-832-9792 • Fax: 715-832-7767

Find out more about profitable crushing at metso.com/showroom/aggregates #TheMetsoWay

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8600 Fax: 515-309-0667

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870 4115 S. 90th St. Omaha, NE 402-331-9200

5601 Fletcher Ave. Lincoln, NE 402-325-0447 4949 Juergen Rd. Grand Island, NE 308-384-2620

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Page 90 • December 3, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

You Des Deser serve the Best. Beest From our most compact stump grinders and hand-fed chippers through our largest whole tree chippers and The Beast® recyclers, Bandit® equipment is built to make you money. We reduce your costs by maximizing fuel efficiency and reducing downtime. And we increase your income by producing the highest quality end product for your market. Bandit builds the best hand-fed chippers, stump grinders, whole tree chippers, The Beast recyclers, track carriers and skid steer attachments in the industry. And equally as important... Bandit Builds Your Bottom Line.

www.banditchippers.com | 1.800.952.0178 | Remus, MI - USA VISIT YOUR NEAREST AUTHORIZED DEALER ER LOCA ATION TION LARGE EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3633 Fax: 847-678-7570

West Chicago, IL 630-293-0606

Mokena, IL 708-596-8050

Yorkville, IL 630-553-0150

Wauconda, IL 847-526-4255

www.atlasbobcat.com

1200 East Highway 13 Burnsville, MN 55337 952-894-0894 877-262-2284

588 Outpost Circle Hudson, WI 54016 715-531-0801 866-268-2418

3101 Spruce St. Little Canada, MN 55117 651-407-3727 877-331-0295

www.tristatebobcat.com

7800 Broadview Rd. Parma, OH 44134 440-340-3001

535 N. Hwy Drive Fenton, MO 60326 636-349-1141

www.kandksupply.com 3218 Marshall Dr. Amelia, OH 45102 513-685-0808 www.buckeyeequipmentsales.com

Ashland, KY 606-928-3477

Cross Lanes, WV 304-204-1818

Norton, WV 304-636-6421

Cowen, WV 304-226-3299

Pleasant Valley (Fairmont), WV 304-534-5454

Pikeville, KY 606-432-0321

Beaver, WV 304-255-1525

www.lec1.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 3, 2016 • Page 91

CRUSHING

MATERIAL MA ATERIAL HANDLING HAN

SCREENING

TRACKS

ZZZ PFDOOLVWHUHTXLSPHQW FRP T S

ZZZ DPVWDWH FRP

ZZZ UPVHTXLSPHQW FRP T S

WASHING W ASHING & CLASSIFYING CL

ZZZ JHQHTXLS FRP Z ZZ JHQHTX T LS FRP

The complete source for equipment in the aggregate, construction and recycling industries. Offering industry-leading brands such as the Pioneer Jaw Crusher, Kodiak® Plus Cone Crusher, SuperStacker® Extendable Stacker, ProSizer® Mobile Screening Plant, Combo® Screen, Vari-Vibe® High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, Global Track and FastPack.

www.kpijci.com

Page 92 • December 3, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

ALTA EQUIPMENT COMPANY

BRANDEIS MACHINERY & SUPPLY COMPANY

www.altaconstruction equipment.com

www.brandeismachinery.com

Detroit, MI 313-394-1811 Grand Rapids, MI 616-878-7450 Flint, MI 810-744-4840 New Hudson, MI 248-356-5200 Traverse, MI 231-943-3700

Louisville, KY 502-491-4000

Stanville, KY 606-478-9201

Evansville, IN 812-425-4491

Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

HOWELL TRACTOR & EQUIPMENT LLC www.howelltractor.com

GIBSON MACHINERY LLC www.gibson machinery.com

Gary,IN 800-852-8816

Cleveland, OH 440-439-4000

Peru, IL 800-342-6072

Pittsburgh, PA 724-695-5000

ROLAND MACHINERY CO. www.rolandmachinery.com

Carterville, IL 618-985-3399

Franksville, WI 262-835-2710

East Peoria, IL 309-694-3764

DePere, WI 920-532-0165

Bridgeton, MO 314-291-1330

DeForest, WI 608-842-4151

Columbia, MO 573-814-0083

Eau Claire, WI 715-874-5400

Cape Girardeau, MO 573-334-5252

Schofield, WI 715-355-9898

Palmyra, MO 573-769-2056

Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO.

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com

www.vlpco.com

Kansas City, MO 800-878-9290 Joplin, MO 800-878-8223 Brookline Station, MO 800-955-2729 Wichita, KS 800-878-3346 Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

Savage, MN 800-888-9515

Milan, IL 800-633-9114

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Sioux City, IA 800-633-9104

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 3, 2016 • Page 93

Attachments can n make your machine moree valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology.Full product line. Competitive price and performance. Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251

2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661 Fax: 502/732-8355

ILLINOIS TRUCK & EQUIPMENT www.iltruck.com 320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486

HOWELL TRACTOR AND EQUIPMENT

HIGHWAY EQUIPMENT COMPANY

www.howelltractor.com 480 Blaine St. Gary, IN 46406 800-852-8816 Fax: 219-977-6395 2770 May Rd. Peru, IL 61354 815-224-3003 Fax: 815-224-2538

www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391 Fax: 330-915-8411

Page 94 • December 3, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Announcing a Tough New Combination in Iowa, Illinois & Nebraska with

Sales, Service, Parts & Rental Provided By

For Tough Crushing & Screening Solutions

Call 319-857-4045 www.rtlequipment.com

CRUSHING PLANTS

We Call It EXPERTISE. You Call It PEACE OF MIND.

SCREENING Plants

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers. For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w. i r o c k c r u s h e r s . c o m

Closed-circuit PLANTS

Crush. Classify. Profit.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 3, 2016 • Page 95

LET’S BE CLEAR SCREEN MACHINE PRODUCTS ARE BETTER ... BY DESIGN!

TRAMP IRON RELIEF SYSTEM

Even the most powerful jaw crusher can be stopped by a blockage of material at the base of the jaws. That means downtime, and that means lost productivity.

Issue: Non-crushable item gets lodged at the nip angle of the jaw crusher.

Screen Machine’s JXT Jaw 0% Financing Crusher features our exclusive 48 8 Months Blockage Clearance and Tramp for 4 Iron Relief System. It lets the available! now availab le! on all new factory orders closed side setting expand to clear blockages and maintain production.

Solution: The Tramp Iron Relief System automatically widens the closed side setting, letting the item through.

Visit our web site for full details on how it works, and how it helps you work better ... www.screenmachine.com/jxt-jaw-crusher.php

American-Made Innovation Since 1966 800-83 800-837-3344 7-3344 344

7740-927-3464 40-927-3464

email@screenmachine.com

See how it works at www.screenmachine.com

Page 96 • December 3, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Mobile-Friendly Website Offers All New Content

Alta Equipment Company www.altaequipment.com

8840 Byron Commerce SW Byron Center, MI 49315 (616) 878-7450 Fax: (616) 878-7650

1061 Stepke Ct. Traverse, MI 49685 (231) 943-3700 Fax: (231) 943-8110

G3283 S. Dort Hwy. Burton, MI 48529 (810) 744-4840 Fax: (810) 744-1523

56195 Pontiac Trail New Hudson, MI 48165 (248) 356-5200 Fax: (248) 356-2029

5105 Loraine St. Detroit, MI 48208 (313) 394-1811 Fax: (313) 394-1812

Brandeis Machinery & Supply Co. www.brandeismachinery.com

Evansville, IN • (812) 425-4491 Ft. Wayne, IN • (260) 489- 4551 Indianapolis, IN • (317) 872-8410 Corbin, KY • (606) 528-3700 Lexington, KY • (859) 259-3456 Louisville, KY • (502) 491-4000 Paducah, KY • (270) 444-8390 Stanville, KY • (606) 478-9201

Bandit Industries has a new home on the Internet. The website address is still the same — www.banditchippers.com — but the site features all-new content with easy-to-navigate menus. The new banditchippers.com also is optimized for mobile devices, so it can be easily viewed and navigated through smart phones and tablets. “Our previous website did a good job of showcasing Bandit equipment and current news, but it wasn’t designed for use with mobile devices and that’s something we very much wanted to address,” said Bandit Industries Marketing Manager Aaron Sorrels. “When we dove into this update, it was clear from the beginning that the best way forward was to start from scratch, so that’s exactly what we did.” The new banditchippers.com also emphasizes a stronger visual experience for visitors. Aside from photos throughout the site, each machine features a scrolling photo gallery, some of which include short embedded videos. All Bandit worldwide dealer locations can be easily located by either searching specific model lines or locations, or by browsing an interactive map. Throughout the website, visitors have the ability to easily contact Bandit. “One of our main objectives was to make it as easy as possible for visitors to connect with dealers and with Bandit directly,” said Sorrels. “There are numerous opportunities for visitors to send messages directly to Bandit, including a highlighted Contact Us button that is always available at the top of the page. Dealer contact information is also included in each dealer profile.” The new website also features numerous sections designed to help educate visitors on a variety of Bandit-related subjects, some of which include: • The Bandit Backbone product support team, which provides free tech support for equipment during normal business hours. • In The Field, which showcases Bandit equipment and customers working in real-world situations. • News And Events, which highlights current Bandit news and the company’s trade show schedule. • The Bandit Story, which shares the founding and growth of Bandit, as well as the company’s mission statement and core values. “Obviously it’s important for us to showcase our equipment, but Bandit is also very much about people and the pride they have for the equipment.” said Sorrels. “Showcasing and sharing that pride is something we very much wanted to capture with this new website, and when you see the intro video playing on the home page or read some of the customer case studies, I think the pride comes through loud and clear.” For more information, visit http://www.banditchippers.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 7910 Highway 2W Devils Lake, ND 58301 701-665-3800 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 3402 36th St. SW Fargo, ND 58104 701-280-3100 800-726-7475

1201 S. 46th St. Grand Forks, ND 58201 701-775-4238 17040 Hwy 11 Hankinson, ND 58041 701-242-7474 7695 Highway 18 S. Hoople, ND 58243 701-894-6363 1910 27th Ave SE Jamestown, ND 58401 701-251-1400 1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

4950 E. Highway 12 Aberdeen, SD 57401 605-225-6240 1715 US Hwy 14 W. Huron, SD 57350 605-353-1200 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

www.fabickcat.com

Cape Girardeau, MO 800-845-9175 Marion, IL 800-845-9179 Metropolis, IL 866-299-6044 Salem, IL 800-845-9176 Troy, IL 866-345-5681 Mt. Carmel, IL 888-769-7247 Milwaukee, WI 414-461-9100

Madison, WI 608-271-6200 LaCrosse, WI 608-783-4891 Eau Claire, WI 715-874-5100 Wausau, WI 715-359-6220 Green Bay, WI 920-498-8000 Superior, WI 715-398-9696 Marquette, MI 906-475-4191

One Fabick Drive Fenton, MO 64026 800-845-9188 Foristell, MO 800-539-9217 Columbia, MO 800-791-5401 Jefferson City, MO 800-845-9177 Springfield, MO 888-959-2100 Joplin, MO 866-313-1748 Willow Springs, MO 866-628-1717

www.zieglercat.com MINNESOTA BEMIDJI* 5426 Hwy 71 North Bemidji, MN 56601 877-829-9850 BRAINERD 3311 Liberty Lane Brainerd, MN 56401 218-829-9800 BUHL 10081 East Hwy 169 Buhl, MN 55713 218-258-3232 COLUMBUS 13822 West Freeway Drive Columbus, MN 55038-9705 651-982-5600 CROOKSTON 720 3rd Ave SW Crookston, MN 56716-0538 218-281-4245 DULUTH 210 Garfield Ave. Duluth, MN 55802-2696 218-722-6628 FERGUS FALLS 3502 State Hwy 210 West Fergus Falls, MN 56537-4003 218-736-2680 JACKSON 191 Industrial Parkway Jackson, MN 56143 866-847-6401 MANKATO 2145 Howard Drive West Mankato, MN 56003 507-388-1444 MARSHALL 1200 North Hwy 59 Marshall, MN 56258-2761 507-532-4403 MINNEAPOLIS 901 West 94th Street Minneapolis, MN 55420-4236 952-888-4121 ROCHESTER 6340 Hwy 63 South Rochester, MN 55904-8414 507-285-1775

SHAKOPEE 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 ST. CLOUD 2225 255TH Street St. Cloud, MN 56301-8742 320-253-2234 IOWA ALTOONA 1500 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3800 PARTS EXPRESS 515-957-3843 800-752-0856 ZIEGLER RENTAL 1600 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3828 888-270-6258 Fax: 515-957-3881 ATLANTIC 951 Park Drive Atlantic, IA 50022 712-243-1039 877-547-3819 FORT DODGE 3366 5TH Ave. South Fort Dodge, IA 50501-6428 515-576-3161 800-342-1848 MASON CITY 11490 265TH Street Mason City, IA 50401-9656 641-423-7240 800-342-1849 POSTVILLE 308 North Lawler Street Postville, IA 52162-7802 563-864-7461 800-526-0889 SHELDON 102 Crossroads Drive Sheldon, IA 51201 712-324-5604 855-344-5604 SIOUX CITY 5300 Harbor Drive Sioux City, IA 51111-1114 712-252-4401 800-342-1847

*Parts and rental only

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 3, 2016 • Page 97

www.whayne.com 1400 Cecil Ave Louisville, KY 502-774-4441 Ashland, KY 606-928-3444 Bowling Green, KY 270-843-3275 Corbin, KY 606-528-3140 Dry Ridge, KY 859-823-1500

www.altorfer.com 2600 6th Street S.W. Cedar Rapids, IA 52404 319-365-0551 Fax: 319-365-5639 4712 Buckeye St. Davenport, IA 52802 563-324-1935 Fax: 563-324-2409 #1 Capitol Dr. East Peoria, IL 61611 304-694-1234 Fax: 309-694-4148

Evansville, IN 812-425-4651 Hazard, KY 606-439-4040 Lexington, KY 859-254-2756 Paducah, KY 270-443-3631 Pikeville, KY 606-437-6265

4200 Rodger Street Springfield, IL 62705 217-529-5541 Fax: 217-529-0020 1519 W. Kenyon Rd. Urbana, IL 61801 217-539-1671 Fax: 217-359-6310 3520 Moberly Ave. Hannibal, MO 63401 573-221-8600 Fax: 573-221-7187 701 Highway 24W Moberly, MO 65270 660-263-8200 Fax: 660-263-8203

www.macallister.com 7515 East 30th St. Indianapolis, IN 46219 800-382-1896 Fort Wayne, IN 800-944-0847 South Bend 800-685-9849 Lafayette, IN 800-283-4231 Washington, IN 800-932-5120 Terre Haute, IN 800-273-5650

www.ohiocat.com Cleveland, OH 440-526-6200 800-837-6200 Fax: 440-526-9513 Cadiz, OH 740-942-4626 800-837-6204 Fax: 740-942-4029 Canton, OH 330-244-2444 800-837-6207 Fax: 330-244-9130 Cincinnati, OH 513-771-0515 888-332-4658 Fax: 513-672-7658 Columbus, OH 614-878-2287 888-441-4658 Fax: 614-851-5015

Toledo, (Perrysburg) OH 419-874-7975 888-339-4658 Fax: 419-873-8255 Troy, OH 937-335-7660 888-330-4658 Fax: 937-335-6447 Youngstown, OH 330-530-9010 800-837-6203 Fax: 330-530-9102 Zanesville, OH 740-453-0563 800-837-6205 Fax: 740-452-3605 Richwood, KY 859-372-4665 888-446-4658 Fax: 859-372-4659

INVESTED IN THE SUCCESS OF YOUR BUSINESS. For more information visit Cat.com © 2016 Caterpillar • All Rights Reserved • Printed in USA CA AT, CATERPILLAR, BUILLTT FOR IT, their respective logos, s, “Caterpillar YYellow ellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 98 • December 3, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

GET A HANDLE ON OPERATING COSTS TTerex erex® Fuc Fuchs hs Ma Material terial Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® Fuchs material handlers help you get a handle on your business with: An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus titi t i l h dl

Penn Jersey Mac hinery Deptford, NJ 856-227-6400

Frenchtown, NJ 908-824-4200 POWERSCREEN INDIANA, Lionville, P PA A INC. www.powerscreenindiana.com 610-363-9200 255 N. Hetzler Court, Suite C Angola, IN 46703 260-665-5816 • Fax: 260-665-3241

Staten Island, NY 718 448 2444

Chadwick-Baross Chelmsford, MA 800-804-0775 Bangor, M E 800-698-4838 COMPANY WRENCH

Caribou, M E 4805 Scooby Lane NW 00-2 70-25 47 8

www.companywrench.com Carroll, OH 43112 866-262-4181 • Fax: 740-687-9130

WCleveland Westbrook, e estbrook, ME Branch 8525 0 Golden 00 262-5 714 Oak Pkwy

Oakwood Village, OH 44146 440-439-4567 • Fax: 440-439-1789 Piketon Branch 3668 US Route 23 South Piketown, OH 740-289-3294 Cincinnati Branch 3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 • Fax: 513-649-8107 7019 Brookville Rd. Indianapolis, IN 46239 317-375-7790 Fax: 317-375-7792

terex.com/construction

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 3, 2016 • Page 99

A WIRTGEN GROUP COMPANY

POWERFUL PERFORMANCE. JUST TAKE YOUR PICK. MOBICAT MC 110 EVO

MC 110 R EVO I MC 110 Z EVO

EFFICIENT HIGH ACHIEVERS IN TWO VERSIONS. Whether you opt for the MC 110 EVO Z with its independent double-deck prescreen, or the R-version with its vibrating feeders and integrated slotted grate – the crushing unit with its elevated crushing jaw ensures optimal material feed and an impressively high crushing capacity of up to 330 t/h for both systems. Combined with their innovative and cost-effective diesel-directdrive concept and exceptional transportability, powerful performance is guaranteed. The MOBICAT MC 110 EVO.

www.kleemann.info

Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330 Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Page 100 • December 3, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

RTEX Breakers Boast Less Air, Fuel Consumption

)HDWXUHV DQ HQFORVHG HQJLQH FRPSDUWPHQW /DUJH IHHG RSHQLQJ DQG LQFK KDPPHUPLOO ZLWK D VHOI FOHDQLQJ DLU LQWDNH V\VWHP 2VFLOODWLQJ VWDFNLQJ FRQYH\RU $YDLODEOH RQ &$7 7UDFN 6\VWHP RU DV D $OVR PDQXIDFWXUHV D ZLGH YDULHW\ RI TXDOLW\ ¿IWK ZKHHO WUDLOHU WXE JULQGHUV 7KUHH GLIIHUHQW OHYHO RSWLRQV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS NZ WR KS NZ

action

cts in View produ Tech D e on th ura l! channe

7KLV SRZHUIXO FKLSSHU FDQ JULQG ORJV XS WR LQFKHV LQ GLDPHWHU DQG LV FRPSDFW VR LW FDQ EH HDVLO\ WRZHG WR D MRE VLWH KS NZ &$7 & GLHVHO HQJLQH 37 7HFK FOXWFK )HDWXUHV D VSULQJ ORDGHG IHHG ZKHHO ZLWK DGMXVWDEOH GRZQ SUHVVXUH

2SWLRQDO KHLJKW VHQVRU WKDW DXWRPDWLFDOO\ DGMXVWV WKH IHHG UROOHU WR PDWHULDO VL]H 2SWLRQDO K\GUDXOLF JDWKHULQJ ZLQFK ,QQRYDWLYH KRSSHU VDIHW\ OLJKW EDUV ZLWK HDV\ DQG LQVWDQW VKXW GRZQ $YDLODEOH ZLWK SLQWOH RU EDOO KLWFK

Swanston Equipment Co. 3450 West Main Ave. Fargo, ND 58103 888-792-3192

www.duratechindustries.net

Atlas Copco’s RTEX pneumatic breaker offers rental centers and contractors a cost effective and powerful solution for a variety of demolition projects. The RTEX requires just 37 cfm to operate, about 50 percent less air energy than conventional breakers in the same weight class. This gives contractors the option to run multiple breakers off a compact air compressor, resulting in greater efficiency and a high return on investment, according to the manufacturer. “Contractors will notice the RTEX difference after one use. Since the RTEX air consumption is essentially cut in half, contractors are able to run two 60-pound RTEX breakers off a 90-cfm compressor,” said Gus Armbruster, Atlas Copco handheld construction tools product manager. “This not only saves on rental or ownership costs on a small compressor, but also on fuel consumption without sacrificing breaking power.” The RTEX has the breaking capacity of a 66-lb. (30 kg) breaker or greater, but weighs only 55 lbs. (25 kg). Its Sofstart two-step trigger lets the operator start the breaker slowly for full control over the chisel’s starting position and placement. The RTEX operates with a constant pressure control that features improved energy transfer from the breaker to the new RHEX power chisel. The RHEX chisel generates a powerful breaking force and features a concave tip profile to significantly reduce jamming and promote operator productivity. The constant pressure chamber sits at the top of the breaker and serves as an advanced pneumatic suspension, which minimizes vibrations. Since the constant pressure chamber sits at the top of the breaker there is no need for ergonomic handles — vibration values are compara-

Atlas Copco’s RTEX pneumatic breaker offers rental centers and contractors a cost effective and powerful solution for demolition, maintenance and renovation projects.

ble to a conventional breaker with flexible and vibrationreducing handles. This enhances operator comfort and allows the operator to work as much as eight times longer than with conventional breakers, according to the manufacturer. The breaker’s minimal vibrations also minimize stress on its internal components, which means fewer spare parts replacements and less maintenance. The RTEX features a long piston design that delivers double the interaction time — 100 milliseconds — of the tool with the surface than conventional pistons. This results in higher impact energy per blow and faster results than what can be achieved with conventional breakers in the 60-lb. weight class. In a conventional breaker, air discharges each time the acting piston moves up or down. In the RTEX breaker, the air discharges only once — on the piston’s return stroke, in which the constant pressure from the chamber pushes the piston down. Minimum valuable air is consumed, contributing to the high efficiency of the stroke mechanism. For more information, call 800/7326762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 3, 2016 • Page 101

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36 St. SW Fargo, ND 58014 701-280-3100 800-726-7475 th

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 7910 Highway 2 W Devils Lake, ND 58301 701-665-3800 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.

A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source. The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8600 Fax: 515-309-0667

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-6275

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. • Eau Claire, WI 54701 715-832-9792 • Fax: 715-832-7767

#TheMetsoWay

Page 102 • December 3, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Illinois

Indiana

Michigan

Minnesota

Ohio

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen of Michigan, LLC

Theco, Inc.

AGGCORP

7144 N. Harlem Ave.

255 N. Hetzler Court

36639 Groesbeck Hwy.

5470 Quam Ave. NE

22800 Lakeland Blvd.

Chicago, IL 60631

Angola, IN 46703

Clinton Township, MI 48035

St. Michael, MN 55376

Cleveland, OH 44132

midwestcrushandscreen@gmail.com

sales@powerscreenindiana.com

powerscreenofmichigan.com

www.thecoinc.com

www.aggcorp.net

847.271.5027

313.841.8370

586.229.2882

800.776.0335

614.309.6854

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 103

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 25-26 EB 614-395-4064

2010 332D John Deere 89 HP, 202 Hrs, 2 Speed A/C Joystick Controls .................................$44,900 Call MN Equipment 763-428-4107 24-25 PK

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 24-25 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 24-25 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 24-25 DH

1995 Fiatallis FR130.2, Cab w/Heat, 139 HP Turbo Diesel ...............................................$24,250 25 JM Call Steve 262-373-2151

2010 Link-Belt 350 X2, Cab w\AC, 10’8” stick with 36’8” reach and 24’1” dig depth ...............$104,600 Call Steve 262-373-2151 25 JM

2014 Takeuchi TL10, 92 hp T4i Kubota Diesel, 2 speed travel, aux hydraulics.......................$41,010 Call Steve 262-373-2151 25 JM

2015 Kawasaki 70Z7, 168 hp Cummins, JRB coupler, cab w/AC ..........................................$149,000 Call Steve 262-373-2151 25 JM

2005 Sterling LT9500, Mercedes engine, 329K, 410HP, Automatic, 18' Barrel Bed, Stock #15205... ....................................................................$75,500 Call Dave at REED Company 25-26 JM 620-340-7953

2002 Sterling LT9500, 218K, C12, 410 HP, 16' Elliptical bed, Stock #15152 ......................$62,500 Call Dave at REED Company 25-26 JM 620-340-7953

2004 Kenworth T300, 195K, C7, 250HP, with an 11' Dump Bed .............................................$39,750 Call Dave at REED Company 25-26 JM 620-340-7953

2002 International 2674, 244K, DT530, 330HP, 8spd, with 16' Barrel Bed ..........................$54,500 Call Dave at REED Company 25-26 JM 620-340-7953

2004 Cat 330CL Excavator, 9132 Hrs, 247 HP C-9 Diesel, 12’9” Stick, 60” Bkt, Extra CounterWeight for Heavy Lifting, Cab w/Heat & AC, AM/FM, and Fresh Epoxy Paint. This is an aboveaverage leak free machine. A must see .....$55,000 Call Mike Pieper 319-470-8388 24-25 PK

2006 Cat XQ-80 Generator, 8146 Hrs ...........$19,000 Albert Medcalf or Marcela Newman 24-25 EB 502-456-4050

2010 Bobcat E80, 3565 Hrs, 57 HP, 2-Speed Drive, 18” Digging Bucket, 24” Digging Bucket .........$49,500 Call George 219-696-8911 25-26 JM

2014 Terex TSV70 Skid Steer Loader, Vertical Path, 74hp, 2-Speed, Hyd-Quick-Tach 129” Hinge ........$36,600 25-26 EB Call Tania 614-443-9751 x237

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 25-26 TM

2004 Takeuchi TL140, 2546 Hrs, Cab & Heat ............ ..........................................................................$26,166 Top Notch Equipment, Inc. 888-824-6559 25-26 PK

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

Page 104 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165

2006-2010 Ingersoll Rand DD-118HF & DD-138HF 1999 Dynapac SP-CC-102 Dual Drum Vibratory 2012 Volvo MT2000 Milling Machine, Cummins Roller, #7137 ...............................................$6,500 610HP Tier 3 Dsl, 86” Keystone Cutter ....$275,000 Compactors, Various Units to Choose From! 25-26 JM 25-26 JM 800-283-1336 25-26 JM 800-283-1336 800-283-1336

2009 Volvo MW500 Milling Machine, 20” Wide Cutter, Deutz Diesel Eng, Rear Conveyor.$115,000 25-26 JM 800-283-1336

2013 Doosan DX235LCR, s/n 005454, 2098 Hrs, One-Way/Two-Way Aux. Hydraulics, Quick Latch.... ..................................................................$115,000 Call David 219-696-5680 24-25 JM

2006 Case 580SM, s/n N6C412119, 4600 Hrs, Cab w/Heat & AC, 4WD, Ext-Hoe, Ride Control, Two Lever, 82” Bkt, 12” and 24” Bkt...........$40,500 24-25 JM Call Dennis 630-774-8830

Case 410, s/n N8M494216, 1455 Hrs, ROPS, Manual Coupler, New Engine @ 1415 Hrs, 10x16.5 Tires, 66” Bkt .................................$14,000 24-25 JM Call Steve @ 630-878-8765

Case 580L, s/n JJG0247133, Cab w/Heat, Two Lever, Ext-Hoe, 4WD, 18” Backhoe Bkt, 82” Front Bkt ..............................................................$23,500 24-25 JM Call Steve @ 630-878-8765

2001 Grove TMS 500E, 40 Ton, 95’ Main Boom, 26’-45’ Jib, 3 Sheave Block, 68,000 Miles, 10,112 Hrs, 1 Owner Machine, Fresh Grove Paint, Cleveland, Ohio .............................................CALL Call Andy Forepaugh 216-316-1511 24-25 EB

2012 Pete Equipped w/Rear Mount National 9125 WA-WL, 26 Ton, 125’ Main Boom, 500 HP Cummins, 10 Speed Eaton Transmission, 18’ Bed, Steerable Lift Axle, 39,000 Miles, 5150 Hrs, Cleveland, Ohio .............................................CALL Call Andy Forepaugh 216-316-1511 24-25 EB

Ford 455 Diesel Tractor Front Loader, Rear Dragbox, Removal Teeth, Roof Cover, 1200 Hrs, Used by Owner, Very Good Condition 24-25 AP Call Bob 734-972-9658

2009 Cat 420E, County Machine, Cab, A/C, 4-in-1 Loader ........................................................$55,000 Call Mark 785-823-6378 25-26 JM

2005 FECON FTX90L with Rear Winch, 1450 Hrs ....................................................................$35,000 25-26 JM Call Mark 785-823-6378

Doosan DL 220, 380 Hrs, 3 Yd Ride Control, Quick Coupler ..........................................................$135,000 Caleb Hinkkanen 800-456-4005 Ext. 143 25-26 PK

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 25-26 JM

SEE YOUR BARGAIN AD IN

COLOR

ONLY $50 EXTRA FOR TWO INSERTIONS

Here's how the BARGAIN ADS Work: • • • •

Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. Cost is $115 per ad, $50 additional for color. Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 105

CLASSIFIEDS eQUIPMent DeCALs

rePLACeMent DeCAL sets for Construction, Forestry, and Industrial equipment. safety Decals. Prompt, Knowledgeable Service. Great Prices. We are the Heavy equipment Decal experts. Call 215-536-5339 Email: info@CustomServices Company.com www.QuipCal.com

eXCAVAtors Hydraulic excavators

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

gibson Machinery 440-439-4000

ForestrY eQUIPMent Chippers 1995 Vermeer 935BC, Wood Chipper 9'' Disc, Used$13,995. 1990 Vermeer 1250, 12'' Disc, Street Load Perkins Diesel, Used ..........................$10,995. Buckeye equipment sales 440-340-3000

LoADers skid steer Loaders

Wheel Loaders 1990 Michigan L190, Cab w/ Heat, 5.8 yd bucket, 29.5R25 tires, 9,199 hrs ..........$19,500. Illinois truck & equipment 815-941-1900

track Loaders takeuchi tL140 Track Loader, S/N 21403980, New trade, Cab w/ Heat & AC, Tooth bucket, Good condition, 3,008 hours $28,000. Bobcat of st. Louis 314-402-4491

roAD MAIntenAnCe sweepers

2013 CAt 272D, A/C, 98 HP Tier 4 diesel, pilot controls, manual coupler, aux. hydraulics, 74'' bucket, 583 hours ..........................$35,000.

'16 Laymor sweepmaster, Canopy, Tier 4 diesel, 8' boom, 70 gallon sprinkler system, towable, 6 hours..............$23,500.

Illinois truck & equipment 815-941-1900

BusinessCalendar

To view our Business Calendar online, go to www.constructionequipmentguide.com.

Nebraska Land Improvement Contractors Association 58th ANNUAL NLICA CONVENTION DATES: JANUARY 17 – 19, 2017, 6:00 PM PLACE: Holiday Inn Convention Center, Kearney, NE For additional information visit www.NELICA.org ASSOCIATED GENERAL CONTRACTORS WebEd: Cybersecurity Webinar Series DATES: THURSDAY, NOV. 10, 2016 to FRIDAY, DEC. 9, 2016 TECHNOLOGY https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS Contractor Executive Exchange Changing the Way Contractors Source New Solutions and Build Relationships with Vendors DATES: SUNDAY, DEC. 4, 2016 to TUESDAY, DEC. 6, 2016 CHARLESTON, SOUTH CAROLINA Other https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS Construction Project Manager Course DATES: SUNDAY, DEC. 4, 2016 to FRIDAY, DEC. 9, 2016 DALLAS, TEXAS https://www.agc.org/connect/events-calendar Missouri Land Improvement Contractors Damage Prevention and Excavation Safety Summit DATES: WEDNESDAY, DEC. 7, 2016 to THURSDAY, DEC. 8, 2016 LOCATION: OZARK EMPIRE FAIRGROUNDS SPRINGFIELD, MO For more information, contact Deb Dickens, Executive Director. Phone: 573/634-3001 • Email: MLICA@aol.com Missouri Land Improvement Contractors Missouri LICA Winter Convention Dates: January 26 - 28, 2017 Place: Hilton Garden Inn, Columbia, MO For more information, contact: Missouri LICA State Office Deb Dickens, Executive Director 1101 West High Street, Jefferson City, MO 65109 Phone: 573/634-3001 • Email: MLIA@aol.com

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

2012 Kobelco sK140, Hyd. Quick Coupler, Good condition, 3,000 hours................$70,000.

engInes equipment Decals

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

AGC (Associated General Contractors) of Minnesota STP CLASSES Supervisory Training Program (STP) classes for November – December will start the week of November 7. For additional information, contact Renee Horsman at rhorsman@agcmn.org

trUCKs Articulating trucks 2013 Doosan DA30, Articulate Dump Truck, Good condition, 2,647 hrs..................$240,000.

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL?

gibson Machinery 440-439-4000

Construction Equipment Guide is THE Place to List It!

Would you like

YOUR COMPANY featured in Construction Equipment Guide? If so, please contact us:

470 Maryland Drive, Fort Washington, PA 19034

ONLY

$40

2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

You must have a classified print ad to do so.

Call 800-523-2200

or go online to place your ad www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

IOWA LAND IMPROVEMENT CONTRACTORS ASSOCIATION AGC’s 98th ANNUAL CONVENTION Dedicated to Professional Conservation of Soil and Water EVENT: IOWA LICA STATE CONVENTION DATES: JANUARY 8, 2017 to JANUARY 10, 2017 (all-day) For more information on the Convention, contact Iowa Chapter of Land Improvement Contractors Association, 17751 Big Spring Road, St. Olaf, Iowa 52072 AGC (Associated General Contractors) of Minnesota Once again, we will be collecting for Toys for Tots at the holiday PHONE: 563/202-0682 reception. New toys, games, and books, as well as cash and checks, will be greatly appreciated. Checks should be payable AGC’s 2017 Conference to “Toys for Tots.” There will also be cash jars available at the Surety Bonding and Construction Risk Management reception. Checks can also be mailed in advance of the recep- TYPE: CONFERENCE/EXPO tion to Denise Woods at the AGC office. Denise Woods, AGC of DATES: JAN. 30, 2017 (12:00 AM CT) to FEB. 1, 2017 (12:00 AM CT) Minnesota, 525 Park Street, #110, St. Paul, MN 55102. LOCATION: NAPLES, FLORIDA WEB SITE: http://meetings.agc.org/risk/ ASSOCIATED GENERAL CONTRACTORS This conference serves and supports everyone playing a senior CONTRACTOR EXECUTIVE EXCHANGE role in construction risk management. That includes all senior DATES: Sunday, Dec. 4, 2016 to Wednesday, Dec. 7, 2016 executives of the construction companies in the AGC family, and LOCATION: Belmond Charleston Place, Charleston, SC We are very excited to invite you to attend the inaugural particularly the in-house lawyers and risk managers for these Contractor Executive Exchange sponsored by AGC of America, companies. December 4 to December 7, 2016 at the Belmond Charleston Place in beautiful Charleston, SC. Over the course of 2.5 days, Concrete Sawing & Drilling Association (CSDA) to Meet in suppliers will take part in pre-scheduled one-on-one meetings Puerto Rico for the First Time CSDA is heading to beautiful Puerto Rico for the association’s with the industry’s top general contractors. 45th Annual Convention & Tech Fair. For more information, please contact: Drew DeSarle; Dates: March 14-18, 2017 ddesarle@exchangeevents.com; Phone: 440/465-9618; Puerto Rico is an ideal location for industry professionals to www.exchangeevents.net/GeneralContractorsExchange-2016/ meet, network and relax – a tropical island paradise that remains part of the U.S. and is easily accessible for American AGC (Associated General Contractors) of Minnesota and international travelers. DATE: TUESDAY, DECEMBER 6, 2016 CSDA has chosen the luxurious Gran Melia Resort as the conEVENT: AGC – MnDOT vention venue – a highly sophisticated architectural gem nestled Grading Forum on Puerto Rico’s northeastern coast in Coco Beach, Rio Grande. Earle Brown Heritage Center, Brooklyn Center The CSDA Annual Convention is attended by owners, managers TIME: 8:30 AM to 4:30 PM and operators from concrete cutting, polishing and imaging AGC Contact: Denise Woods at AGC of Minnesota, 525 Park Street, companies as well as representatives from manufacturers and #110, St. Paul, Minnesota 55102. Telephone: 651/632-8929 distributors who support the industry with products and servicFax: 651/632-8928 Email: info@agcmn.org es. Anyone who falls into these categories should join CSDA for this important networking event. Registration opens September. AGC (Associated General Contractors) of Minnesota For more information, visit www.csda.org/convention, call AGC – MnDOT Grading Forum 727/577-5004 or email info@csda.org. On December 6, 2016, AGC and MnDOT will host the annual allday Transportation Construction and Grading Innovations NATIONAL PAVEMENT EXPO 2017 – REGISTER TODAY! Technology Forum. This forum offers contractors and MnDOT rep- DATES: FEBRUARY 1 thru FEBRUARY 4, 2017 resentatives from around the state an opportunity to hear from PLACE: MUSIC CITY CENTER, NASHVILLE, TN industry experts and discuss common current issues. ALL-NEW LEADERSHIP BOOT CAMP – JANUARY 31 AGC CONTACT: Denise Woods of AGC of Minnesota, 525 Park Four reasons to attend National Pavement Expo: Street, #110, St. Paul, Minnesota 55102. Packed Exhibit Hall Telephone: 651/632-8929 • Fax: 651/632-8928 50+ Conference Sessions lead by construction industry experts covering team development, employment issues, finance, sellEmail: info@agcmn.org.

ing, safety, management and training All-New Leadership Boot Camp for owners and employee leaders, presented on Tuesday, January 31. Nashville from the sights to the sounds, Music City is packed with things to do! Register now and plan your trip to get the best deals on conference sessions, hotels and airfare. For more information, call 920/542-1131 or toll-free at 800/538-5544. National Pavement Expo, AC Business Media, 201 N. Main Street, Fort Atkinson, WI 53538. 2017 Specialized Transportation Symposium Scheduled for February 14 – 17 in Orlando, Florida The Specialized Carriers & Rigging Association (SC&RA) will host the Specialized Transportation Symposium, February 1417, 2017 at the Hilton Orlando Lake Buena Vista in Orlando, Florida. Attendance at this annual event increases every year, and the 2017 Symposium is expected to attract 500 specialized carriers, state and federal government officials, researchers, manufacturers and suppliers to the industry. The Specialized Carriers & Rigging Association (SC&RA) is an international trade association of more than 1,300 members from 46 nations. Members are involved in specialized transportation, machinery moving and erecting, industrial maintenance, millwrighting and crane and rigging operations, manufacturing and rental. For more information, contact the Specialized Carriers & Rigging Association at 5870 Trinity Parkway, Suite 200, Centreville, VA 20120. Phone: 703/6980291. Fax: 703/698-0297. Email: info@scranet.org. ASSOCIATED GENERAL CONTRACTORS AGC’s 98th ANNUAL CONVENTION DATES: Tues., MARCH 7, 2017 to Thurs., MARCH 9, 2017 LOCATION: Las Vegas, Nevada Cultivate, Innovate, Accelerate – Register Now & Save, Early Registration Deadline: November 30, 2016. Make your plans to attend the 98th Annual AGC Convention and seize your opportunity to cultivate new ideas and partners, see and hear about the latest in construction innovation, and leave with the tools to accelerate your business to the next level. The 2017 Convention features a packed program focused on sharing solutions from experienced contractors and industry experts on key construction issues, networking events structured so you can make valuable new connections, and opportunities to shape the future of the construction industry and the association. The AGC Annual Convention is your best opportunity to enhance your business and advance your career. For more information, contact AGC of America at 703/548-3118; communications@agc.org; www.AGC.org.

Page 106 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: WE BUY EQUIPMENT MANUALS. WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS (NOT INCLUDED TRUCKS AND VEHICLES) . WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: KOEHRING 505 BACKHOE LOOKING FOR KOEHRING 505 BACKHOE FOR PARTS, RUNNING OR NOT, ALSO INTERESTED IN OLD PARTS INVENTORY FOR 505. CONTACT: ALBERT HARLOW (PH: 267-738-5984) EMAIL: HARLOWCONTRACTING@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: GRAPPLE VOLVO 360 EXCAVATOR GRAPPLE FOR VOLVO 360 THAT HOOKS TO VOLVO S2 QUICK COUPLER CONTACT: KEVIN SANSALONE (PH: 856 692-0027) EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– WANTED: NEEDED TRUCK 830 E KOMATSU 2011 AND UP 5 TRUCK 793D CORE 40000 HOURS AND UP BUDGET 215000.00US NOT MORE AFTER NEEDED TRUCK KOMATSU I NEED 10 TRUCK 830E 2011 AND UP UNDER 12000 HOURS BUDGET 615000.00US EACH FROM USA ONLY NOT ADVERTISED ONLY DIRECTLY NO SALEMAN NO INTERNET OR PAST MINING ONLY CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WANTED:DEERE ENGINE CORES NEED DEERE 6414 AND 6068 ENGINE CORES AND PARTS ENGINES WITH VEE BELT DRIVE CONTACT: SANDY LAKE DIESEL (PH: 724 253 3450) EMAIL: SANDYLAKEDIESEL@GMAIL.COM FAX: 724 253 4394 –––––––––––––––––––––––––––––––– WANTED: KOMATSU HD605-7 WANT TO BUY 5 KOMATSU HD605-7 2008 AND UP MODEL WITH LOW HOURS IF YOU HAVE ANY PLEASE EMAIL ME PICTURES AND DETAILS. WHOLESALE PRICE ONLY!!! CONTACT: ABDAL HAJI SALEEM (PH: 415-687-0337) EMAIL: HAJICONSTRUCTEST@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED: WANT TO BUY CONSTRUCTION MACHINE OUR COMPANY WANT TO BUY CONSTRUCTION MACHINES, IF YOU HAVE ANY KIND OF MACHINE PLEASE OFFER ME. DOOSAN DX14W - VOLVO 135W, 145W HITACHI EX100WD- DAEWOO SOLAR S130W, S140W, SAMSUNG MX135 DYNAPAC, 251D,252D, 301D, 302D CONTACT: EJAZ AHMAD (PH: 3008859412) EMAIL: GEOIMPEX.EJAZ@GMAIL.COM FAX: 3008859412 –––––––––––––––––––––––––––––––– WANTED: CAT MOTOR GRADER 140G I AM LOOKING TO BUY CAT MOTOR GRADERS 140G.IF YOU HAVE FOR SALE. PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: NAQIB KHAN (PH: 03458818803) EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D10T BULLDOZER D10T ENC CAB WITH RIPPER UNDER 3000 HOURS USA ONLY AFTER I HAVE BULLDOZER D11T 2010 WITH UNDER 3000 HOURS I NEED 620,000.00NEG CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: MEDIUM DUTY TRUCK FREIGHTLINER M2 26K GROSS VEHICLE WEIGHT AUTOMATIC TRANSMISSION AIR BRAKES CONTACT: KEVIN MANGANARO (PH: 302 225 7276) EMAIL: KMANGANARO@BAYSHORETRUCKS.COM FAX: 302 652 5358 –––––––––––––––––––––––––––––––– WANTED: KOMATSU WA320-5 CLEAN WORK READY MACHINE WITH 5000 OR LESS HOURS DASH 5 ONLY MACHINE CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: SMALLER ENCLOSED TRAILER NEED A SMALLER ENCLOSED UTILITY/SPORT TRAILER 1000- 1500 LB. CAPACITY TOTAL CONTACT: DIANE LAMBRO (PH: 973-875-7181) EMAIL: DIANE@STANDARDELEVATORCORP.COM FAX: 973-340-8458 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 330BL CAT EXCAVATOR 330BL IF YOU HAVE ANY PLEASE SEND ME PICTURES AND DETAILS. CONTACT: ABDAL HAJI SALEEM (PH: 415-687-0337) EMAIL: HAJICONSTRUCTEST@GMAIL.COM FAX: 96663312326 ––––––––––––––––––––––––––––––––

WANTED: CELLULOSE FIBER MANUFACTURER BLOWER COOL MACHINE AND BAGGER AND PLANT CONTACT: GARRY EMAIL: GARRY@ECOFIBRA.NET –––––––––––––––––––––––––––––––– WANTED: DOOR FOR 161 KUBOTA MINI EXCAVATOR NEED COMPLETE DOOR FOR 2008 161 KUBOTA MINI EXCAVATOR. CONTACT: ROBERT (PH: 828-837-8986) EMAIL: TFREALTY@DNET.NET –––––––––––––––––––––––––––––––– WANTED: SNOW WING FOR JOHN DEERE 772G OR 872G MOTORGRADER WE ARE LOOKING FOR A SNOW WING FOR A JOHN DEERE 772G OR 872G MOTORGRADER. PLEASE FORWARD DETAILS, PHOTOS AND ASKING PRICE. CONTACT: MARK OR JOHN (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– \WANTED: BOMAG BW24R PARTS PLEASE CONTACT ME BY MY EMAIL. WE HAVE A BOMAG BW24R PARTS NEED TO PURCHASE. PLEASE CONTACT ME AS SOON AS POSSIBLE. THANKS. CONTACT: HONGYA (PH: 15901559975) EMAIL: JLW0001@126.COM FAX: 010-69297410 –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 I AM LOOKING TO BUY HITACHI EX400 AND EX200 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 595D I AM LOOKING TO BUY JOHN DEERE 595D EXCAVATOR IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– CRANE PARTS FOR ALL TYPES OF CRAWLER CRANES, AMERICAN, TEREX, MANITOWOC, LINK BELT, BUCYRUS ERIE, CONTACT: DAVE ANTONELLI PH: 216-531-8000 EMAIL: ACREQUIPMENT@CS.COM FAX: 216-531-8852 –––––––––––––––––––––––––––––––– WANTED: AIR ASSIST STEERING LOOKING FOR AIR ASSIST STEERING FOR B MODEL MACK OR ANY OTHER TRUCK CONTACT: ROBERT CARTER PH: 610-377-0372 EMAIL: CARTER5586@YAHOO.COM ––––––––––––––––––––––––––––––––

WANTED: NEEDED BULLDOZER D11T CD «2« BULLDOZER D11T CD «OR CARRIAGE DOZER ONLY« WITH RIPPER UNDER 8000 HOURS FOR BIG JOB NOT ADVERTISED PLEASE ONLY CARRIAGE DOZER 2013AND UP CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CASE 450 CRAWLER COMPLETE STONE GUARDS LOOKING FOR USED SET OF BOTTOM ROCK GUARDS FOR 450 CASE CRAWLER LOADER SER.NO. 3062213 CONTACT: ROGER (PH: 5706393058) EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED: VSI CRUSHER PORTABLE OR STATIONARY BARMAC WANTED: NEEDED TRUCK 793D CORE OR REMCO VSI FAST. NEEDED TRUCK 793D I NEED 10 CONTACT: JOE (PH: 724-944-5569) AT 12 BUT MUST BE NOT ADVERTISED EMAIL: FJS-1@ATT.NET I NEED TRUCK 793D CORE ONLY –––––––––––––––––––––––––––––––– CONTACT: JEAN MAURICE BOUTIN WANTED: JENBACHER GAS PH: 1-450-346-8975 OR 1-514-386-8975 GENERATOR EMAIL: JEANMAURICEBOUTIN@ JENBACHER GAS GENERATOR 1400 VIDEOTRON.CA KW 50 HZ. IF YOU HAVE ANY, PLEASE –––––––––––––––––––––––––––––––– SEND FULL DETAILS, PICTURES AND WANTED: LOG SKIDDER PRICE. JOHN DEERE SKIDDER 340,440,540 CONTACT: VICTOR LEBRON MUST BE IN GOOD SHAPE (PH: 864-574-0404) CONTACT: JOHN EMAIL: APESALES@AMERICANPLANEMAIL: BLOSSBURGGRANDPA@ TANDEQUIPMENT.COM GMAIL.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: PARTS WANTED: CAT MOTOR GRADER 140G ORIGINAL PAINT, NO CRACKS OR FLOOR PANELS FOR CAT 922B 94A WELDS, MUST HAVE RIPPER CONTACT CHRIS 201 370 5170 CONTACT: WASIM KHAN CONTACT: CHRIS COLABELLA (PH: 832-533-1929) (PH: 201 370 5170) EMAIL: MWASIEM@YAHOO.COM EMAIL: CCOLABELLA@VERIZON.NET –––––––––––––––––––––––––––––––– FAX: 201 939 9059 WANTED: USED GENERATORS –––––––––––––––––––––––––––––––– USED DIESEL GENERATORS RÉNTAL WANTED: WANT TRACTOR FARM TRAILER AND STANDBY INTERNATIONAL 1468 LOW HOURS CONTACT: FELUX WANT TO BUY TRACTOR FARM INTER(PH: 786 603 3060) NATIONAL 1468 ONLY UNDER 4000 EMAIL: EQUIPSALES2016@GMAIL.COM HOURS ORIGINAL I PAY UNDER 4000US –––––––––––––––––––––––––––––––– CONTACT: JEAN MAURICE BOUTIN WANTED: DYNAPAC ROLLER CA 251D, (PH: 1 450 346 8975 OR 1 514 386 8975) 301D, CA262D, AND CA362D EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA CONTACT: RIZ SUNESARA –––––––––––––––––––––––––––––––– (PH: 8325280786) WANTED: CAT 953D OR 963D WASTE EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 8325280786 HANDLER CRAWLER TRACTOR –––––––––––––––––––––––––––––––– WE ARE LOOKING FOR CAT 953D OR WANTED: CAT HYDRAULIC PULL TYPE 963D WASTE HANDLER CRAWLER SCRAPER TRACTORS. PLEASE FORWARD DETAILS, PHOTOS AND ASKING PRICE. WANTED CAT 463 SCRAPER CONVERTED TO HYDRAULIC CONTACT: MARK OR JOHN CONTACT: GEHRING GROUP INC (PH: 1-519-686-1123) (PH: 513-582-3874) EMAIL: SALES@MARCELEQUIPMENT.COM EMAIL: GEHRINGGROUP@GMAIL.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: 24.00-29 TIRES WANTED: 953C OR SAME SIZE LOOKING FOR 2 24.00-29 TIRES FOR NEEDED LOADER 953C OR 953D OR CAT 80 SCRAPER JOHN DEERE 2010AND UP LOW HOURS CONTACT: DEAN JOHNSON USER USER USA (PH: 612-759-9491) CONTACT: JEAN MAURICE BOUTIN EMAIL: (PH: 1 450 346 8975 OR 1 514 386 8975) DEANAJOHNSONINC@GMAIL.COM EMAIL: FAX: 218-945-6511 JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: RUNNING OR NON RUNNING MACHINES!!!! 1) CAT WHEEL LOADERS: 920, 930,936 E/F, 950 B/E/F, 966 C/D/E/F/G/H 970F, 972G, 980G. 2) CAT MOTOR GRADER: 140G, 14G, 140H AND 14H. 3) CAT DOZER: D9R, D9N, D10N AND D10R. WITH RIPPER 4) CAT EXCAVATOR: 225D, 235 C/D AND 330BL. 5) HITACHI EXCAVATOR: EX200, EX200-1, EX400 AND EX400-1 6) JOHN DEERE EXCAVATOR: 595D 7) DYNAPAC ROLLER: CA251D, CA301D, CA262D AND CA362D IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 8325280786 –––––––––––––––––––––––––––––––– WANTED: WANTED TO BUY CATERPILLAR 140G , 140H RUNNING OR NON RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: BELLY DUMPS I'M LOOKING FOR ALL MAKES AND SIZES OF BELLY DUMPS ASAP! WE WILL PAY CASH ON THE SPOT CONTACT: ROBERT BAKER (PH: 480-744-4008) EMAIL: RBAKER.WESTCOAST@OUTLOOK.COM FAX: 480-744-4008 –––––––––––––––––––––––––––––––– WANTED: WANTED HEAVY EQUIPMENT FORKLIFTS BOBCATS SKIP LOADERS WHEEL LOADERS BOX TRUCKS CONSTRUCTION EQUIPMENT LANDSCAPING EQUIPMENT CHIPPERS ALL TYPES OF HEAVY EQUIPMENT LOCATED IN CALIFORNIA OR SURROUNDING AREAS. PACIFIC EQUIPMENT CO. OR GO TO PACIFICEQUIPMENT.ORG CONTACT: WALTER (PH: 714-818-4136) EMAIL: PACIFIC-EQUIPMENT@HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D8T UNDER 3500 HOURS NEED BULLDOZER D8T ENC CAB WITH UNDER 3500 HOURS 2012 AND UP WITH U BLADES OR SEMI U WITH RIPPER WITH EPA NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: 4 N 1 LOADER BUCKET LOOKING FOR A 4 N 1 LOADER BUCKET TO FIT ON A 2007 CASE 570 MXT CONTACT: RON WILLINGHAM (PH: 5806499524) EMAIL: WILLINGHAM@SWBELL.NET ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 107

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Youngstown, OH Sat., December 3, 2016 For: Complete Liquidation Construction Equipment, Trucks, Trailers and more

• Los Angeles, CA Fri., December 9, 2016 • Chicago, IL Fri., December 9, 2016 • Sun Valley, CA Sat., December 10, 2016 • Salt Lake City, UT Mon., December 12, 2016

• Buffalo, NY Thurs., December 8, 2016 For: Major Job Completion Auction

• Albuquerque, NM Tues., December 13, 2016

• Queretaro, Mexico Thurs., December 8, 2016 For: Late Model Construction Equipment & more

• Denver, CO Wed., December 14, 2016

• Marietta, OH Fri., December 9, 2016 For: Late Model Construction Equipment and more • Las Vegas, NV Sat., December 10, 2016 For: Large Job Completion & Rental Returns • Manassas, VA Fri., December 16, 2016 For: Late Model Construction Equipment & more • Atlantic City, NJ Sat., December 17, 2016 For: Rental Equipment • Nashville, TN Mon., December 19, 2016 For: Estate Auction – Late Model Construction, Ag, Trucks & more • Albany (Greenwich), NY Fri., December 30, 2016 For: Final Auction of Year – Late Model Construction Equipment • Long Island, NY Sat., January 7, 2017 For: Late Model Construction Equipment & more • Syracuse, NY Sun., January 8, 2017 For: Light Construction Equipment & more • Dallas, TX Tues., January 10, 2017 For: Retirement Auction – Crane Support Equipment • Houston, TX Thurs., January 12, 2017 For: Rental Fleet & Earthmoving Conclusion Auction • Columbus (Delaware), OH Sat., January 14, 2017 For: Very Late Model Rental Fleet Construction Equipment • Winter Garden, FL January 28 – February 5, 2017 For: 24th Annual 9-Day Florida Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Lincoln, NE Mon., December 5, 2016 • Atlanta, GA Tues., December 6, 2016 • Sacramento, CA Tues., December 6, 2016 • Columbus, OH Wed., December 7, 2016 • Raleigh-Durham, NC Thurs., November 8, 2016

• Manchester, NH Tues., December 13, 2016

• Minneapolis, MN Wed., December 14, 2016 • Kansas City, MO Thurs., December 15, 2016 • North East, MD Thurs., December 15, 2016 • Chehalis, WA Fri., December 16, 2016 • Minneapolis, MN Tues., December 20, 2016 • Nashville, TN Tues., December 20, 2016 • St. Louis, MO Wed., December 21, 2016 • Orlando, FL February 20 – 24, 2017 BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227 • Dallas, TX Fri., December 16, 2016 For: Construction Equipment BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY December 7, 2016 • ONLINE ONLY December 14, 2016 • ONLINE ONLY December 21, 2016 • ONLINE ONLY December 28, 2016 BUNCH BROTHERS AUCTIONEERS www.bunchbrothers.com 270-376-2992 • Louisville, KY Tues., December 6, 2016 For: The Fall Louisville Auction DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com GOODRICH AUCTION SERVICE, INC. www.goodrichauctionservice.com 607-642-3293 • Newark Valley, NY Tues., December 6, 2016 For: Large Farm & Construction Equipment Auction HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Livingston, LA January 26 - 28, 2017 For: 3 Day Winter Construction, Trucking & Farming Equipment Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., December 9, 2016 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY December 14, 2016 • ONLINE ONLY December 28, 2016 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Williamsport, PA Thurs., December 15, 2016 For: Complete Liquidation Susquehanna Supply Co., Inc. I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., March 3, 2017 For: Heavy Equipment INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225

• Prospect, CT Sat., December 3, 2016 For: Construction Equipment

• Sebring, FL Sat., January 14, 2017 For: Construction & Agricultural Equipment

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• Sebring, FL Sat., March 11, 2017 For: Construction & Agricultural Equipment

• LaFountaine, IN Fri., December 16, 2016 For: Absolute Auction – C.A.T. Excavating & Construction, Inc.

• Sebring, FL Sat., May 13, 2017 For: Construction & Agricultural Equipment

IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426 • Kissimmee, FL February 13 – 17, 2017 For: Unreserved Public Auction – Leading Equipment Brands JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles • Kapolei, HI Wed., December 14, 2016 For: Delta Construction Corporation Public Auction JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE ONLY Nov. 22 – December 13, 2016 For: Mining Operation Inventory Liquidation Online Public Auction • ONLINE ONLY December 1 - 14, 2016 For: Absolute Van Trailer Inventory Reduction Auction • Perry, GA Thurs., December 15, 2016 For: Absolute Middle Georgia Contractor Liquidation Public Auction

For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., February 14, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., March 14, 2017 For: Tractor, Farm & Construction Equipment • Great Mills, MD March 24 - 25, 2017 For: Tractor, Farm & Construction Equipment MOTLEYS ASSET DISPOSITION GROUP www.motleys.com 1-877-MOTLEYS • Richmond, VA Tues., December 6, 2016 For: Construction Equipment & Trucks NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322 • Wrentham, MA Sat., December 10, 2016 For: Inventory Reduction Forestry Equipment • Essex, MA Sat., December 17, 2016 For: Retirement Liquidation PETROWSKY AUCTIONEERS A Ritchie Bros. Company www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT TBD - January 2017 For: 2 Day Heavy Equipment & Truck Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Lebanon, TN Sat., March 11, 2017 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • ONLINE ONLY December 6 - 13, 2016 For: December NetAuction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • ONLINE ONLY December 7 - 14, 2016 For: December Online Auction – Upper Midwest Locations • Larchwood, IA Tues., December 20, 2016 For: Aglron Sioux Falls Event • Litchfield, MN Thurs., December 22, 2016 For: Aglron Litchfield Event THOMAS HIRCHAK COMPANY www.THCAuction.com 800-634-7653 • Waitsfield, VT Tues., December 13, 2016 For: Construction Equip., Trucks, Trailers & Tools UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., December 16, 2016 For: Construction, Utility & Forestry Equipment WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction

JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800

• ONLINE ONLY Wed., December 7, 2016 For: BTP Plant Liquidation

• Carrollton, GA Wed., December 7, 2016 For: End of Year Rental Return Auction

• ONLINE ONLY Thurs., December 8, 2016 For: Construction Equipment

WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com 800-443-9580

• ONLINE ONLY Tues., December 13, 2016 For: K&M Rental Retirement Auction

• Frederick, MD Fri., December 9, 2016 For: Mid Atlantic Contractors Auction

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Panama City, FL Wed., December 7, 2016 For: Absolute Auction – Triangle Asphalt, Inc. • Princeton, WV Thurs., December 15, 2016 For: Absolute Auction – Trucks, Trailer, Construction Equipment McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., December 13, 2016 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., January 10, 2017

• ONLINE ONLY Tues., December 13, 2016 For: Morris Companies Reduction Auction • ONLINE ONLY Thurs., December 15, 2016 For: Construction Equipment • ONLINE ONLY Thurs., December 15, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., December 29, 2016 For: Construction Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., December 3, 2016 For: Construction Equipment

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., December 10, 2016 For: Live Public Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Burlington, NC Fri., December 16, 2016 For: Secured Party One Owner Absolute Auction • Kissimmee, FL February 6 – 11, 2017 For: 43rd Annual Consignment Auction

Page 108 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

United Consulting Designs Road System for Milestone

The design-build project, which broke ground last April, is being financed by INDOT and the Indiana Finance Authority. INDOT from page 42

sound barrier posts; Rivertown Construction LLC for concrete bridge rails, Specialties Company LLC for asphalt milling and scarification; and Turn-Key Tunneling Inc. for trenchless pipe installation, and slip line pipe. Milestone submitted its bid for the contract in September 2015 and received the contract in January, giving Nagle and his staff three months to prepare the initial plan of attack. Fortunately there are no major utility issues to deal with and the contractor is responsible for any utility work that will occur. “All the underground utilities are deep and the overhead lines are all out of the way,” said Nagle. “We have to put in some new service points for some lighting — that’s the extent of our utility work. This is really helping us meet our schedule.” The majority of Milestone’s equipment is Cat. This includes Cat 325CL, 330CL, 336EL, 328DCR and 349F excavators and Komatsu PC308 and PC138 excavators; a Cat 140H grader; a Cat 938M IT loader; Cat CB 54XW, CB24, CS433C and CP56 padfoot rollers; Cat D6NXL and D6N dozers; a Cat 420E IT backhoe; Cat AP655F and Cat 1000D asphalt pavers; a Roadtec SB-2500 shuttle buggy; a Link-Belt 218HSL crane; and a Broce broom. Milestone purchases its Cat equipment from MacAllister Equipment, and for this project, has rented two Cat CP54B padfoot smart rollers and a JLG 66-ft. manlift from MacAllister. The general contractor’s main shop/yard

is on the other side of Indianapolis and during the day mechanics are sent as needed, but at night, a mechanic is on site to deal with any issues that might arise as the shop is closed. “We haven’t had a lot of issues with equipment,” said Nagle. “We’ve been pretty lucky in that department. Most of the repairs can be done in an hour or two.” Nagle, who has been with Milestone for 10 years, said that the major lessons being taken to heart are how to manage a project over a large area. “We’ve put a lot of people on the job,” he said. “Access is always an issue and you’re always learning different ways to get in and out. We’re working in the middle of the interstate, and with traffic on both sides of us, just getting equipment, trucks, and people in safely is a constant challenge. We have state police presence and they’re pulling drivers over all the time for speeding.” Nagle is impressed with the original road work. “The original concrete pavement is still holding up when we get down to it,” he said. “It’s in good shape as you can expect for it being over 40 years old and it has been overlayed with asphalt several times and patched. We’ve had a couple of potholes here and there that we had to fix, but that’s it.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 109

Page 110 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Yanmar Acquires Land for Training, Customer Experience Yanmar America, a global manufacturer of advanced performance industrial and marine diesel engines and generators; compact construction, agricultural and utility task vehicle equipment and gas engine based energy systems, has invested $20 million and acquired 50-plus acres of land in Acworth, Ga., to build a new training and customer experience facility. The new facility is slated to open in August 2017 with an official groundbreaking ceremony at the site on Nov. 16, 2016. “Yanmar is proud to continue our investment in the North American market. We believe this new property will help us support our growing dealer network and end user customers, while also broadening our company’s initiatives related to our mission of creating a more sustainable future,” said Takehito Yamaoka, president of Yanmar Co., Ltd. Located within the 75 Corridor at the corner of Highway 92 and Old Alabama Road in Cherokee County, the almost 50,000 sq. ft.

Located within the 75 Corridor at the corner of Highway 92 and Old Alabama Road in Cherokee County, the almost 50,000 sq. ft. facility will feature classrooms with dedicated space for each of the business’ product lines: industrial diesel engines and generators, commercial marine diesel engines, agriculture equipment, construction equipment, utility task vehicles and energy systems; an auditorium; museum; gift shop; cantina; office space and meeting space. Outdoor amenities will include a customer experience area for product demonstrations.

facility will feature classrooms with dedicated space for each of the business’ product lines: industrial diesel engines and generators, commercial marine diesel engines, agriculture equipment, construction equipment, utility task vehicles and energy systems; an auditorium; museum; gift shop; cantina; office space and meeting space. Outdoor amenities will include a customer experience area for prod-

uct demonstrations. “We are delighted to have Yanmar’s state-of-the-art training facility in Cherokee. They are among several new and expanding international corporations choosing Cherokee because of our superb location and access to talent. We look forward to Yanmar’s success as they help to build our sustainable vision for Cherokee,” said Buzz Ahrens, Cherokee

County commission chairman. “Cherokee County was a desirable location for our new facility for many reasons. The area itself offers natural beauty, and the Cherokee County officials were very welcoming and share our vision for promoting sustainability and agriculture. The site’s proximity to our current headquarters in Adairsville and the Atlanta airport is also ideal for bringing in our cus-

tomers from all over the globe,” said Yanmar America president Tim Fernandez on selecting a location. “We want to better equip our customers to make them successful in their businesses and with the Yanmar product,” continued Fernandez. “This new facility will allow us to offer proper training for all aspects of our business, while also providing premium experiences through partnerships with the local communities and industry partners such as farmer’s markets, civic group meetings and consumer educational opportunities.” Croft Architects Engineers based in Kennesaw, Ga., will design and engineer the facility. In addition, Carroll Daniel Construction from Gainesville, Ga., has been selected as the general contractor. For more information, visit yanmar.com/us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Purchase, Sell Equipment at New CEG Marketplace MARKETPLACE from page 1

decision. Purchasing equipment on ConstructionEquipmentGuide.com is easy. Simply select “Find Used Equipment” in the dropdown menu on the right-hand side of the homepage and select a participating dealer. View the equipment for sale and click the buttons to “Buy Now” or “Make Offer.” Also, click on the “Proxibid” tab at the top of our homepage to learn more about buting and selling in this new marketplace. “Proxibid is committed to providing industry-leading ecommerce solutions for the heavy construction equipment category,” said Ryan Downs, president and CEO of Proxibid. “We are excited partner with Construction Equipment Guide, a leading resource for the equipment industry, making it safe for buyers and sellers of equipment to connect and transact online.” More Views, More Sales Since launching this new ecommerce platform, equipment dealers currently participating in the CEG Marketplace have seen a dramatic increase in the number of visits to their equipment listings — some by as much as 99 percent! Check out just a few equipment dealers already taking advantage of this new feature: • E.W. Sleeper, based in Concord, N.H. • Monroe Tractor of Henrietta, N.Y. • George & Swede of Pavillion, N.Y. • Westchester Tractor of Brewster, N.Y. • Vantage Equipment of Syracuse, N.Y.

• Leavitt Machinery of Seattle, Wash. • Yancey Bros. of Atlanta, Ga. In just a short time all seven of these dealers have experienced a meteoric rise in visibility with potential buyers, rising from hundreds of page views to tens of thousands of page views in just the span of one month. Purchase and Sell Equipment With Peace of Mind The same technology that powers Proxibid’s billion-dollar platform has been extended to Construction Equipment Guide. All sales are monitored by Proxibid’s proprietary buyer vetting tool to ensure only qualified buyers can purchase equipment from CEG. Proixbid offers a fully integrated wire payment service, which protects both buyers and sellers throughout the transaction process. This service is customizable to facilitate inspection hours. Only Proxibid offers dispute resolution services. In situations when buyers and sellers come to an impasse, Proxibid mitigates the dispute acting as an impartial third party. This is a unique service not

offered elsewhere. If you are a used equipment dealer and would like to join our growing list of participating dealers, contact your CEG sales representative to get started. About Proxibid Proxibid provides auction companies and asset owners with access to the most trusted way to buy and sell highly valued items online. More than $4 billion in inventory passes through Proxibid’s Marketplace annually via live and timed auctions, and Buy Now and Make Offer capabilities, across 15 categories that include heavy equipment, industrial machinery, real estate and more. Founded in 2001, Proxibid is headquartered in Omaha, Neb., with offices in South Sioux City, Neb., and London. For more information about Proxibid, visit www.proxibid.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 111

Page 112 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

John Carrington Joins Terex MPS Terex MPS, one of the world leaders of material processing technology for modular, portable and static crushing and screening equipment, announced the appointment of John Carrington as aftermarket business development manager for North America. Carrington will have responsibility for both the parts and service organizations in North America and has had progressive career roles in both global field service and aftermarket parts. David Quail, MPS regional director Americas said: “Terex MPS is delighted to welcome John on to our aftermarket business team. He has a wealth of industry experience and technical knowledge. I am confident that John’s arrival will further strengthen the aftermarket team for Terex MPS in North America to ensure we continue with our commitment of providing world class customer solutions and aftercare.” For more information, visit www.terexmps.com.

ABSOLUTE AUCTION C.A.T. EXCAVATING & CONSTRUCTION, INC. FRIDAY, DECEMBER 16, 2016 • 9:30 A.M. 5424 E 1050 S • LaFountaine, IN 46940 Can’t Make it to the Auction? BID LIVE ONLINE! Register for this auction on proxibid.com

CRAWLER TRACTORS: ’12 Cat D6T LGP, ’97 Cat D6M LGP, ’10 Cat D5K XL, 325 Hours, EXCAVATORS: ’05 Komatsu PC400LC-7, ’07 Komatsu PC200LC-8, 2,900 hours, ’11 Komatsu PC138USLC-8, 1,984 hours, ’11 Cat 305.5D CR Mini, Several Extra Buckets, Hyd. Hammer, RUBBER TIRED LOADERS: ’05 Cat 924G w/Coupler, 2800 hours, ’99 Case 821B, ROLLER: ’05 Bomag BW211D3 Smooth Drum, LOADER BACKHOES: (2) Cat 420E IT w/1000 hours, Several Buckets, SKID LOADERS: (2) Case SV300, ’06 Case 450, Several Attachments, SCRAPER: Deere 862B, 4500 hours, TRACTOR: ’04 Deere 4610 w/loader, 800 hours, Several Attachments, BORING EQUIPMENT: ’06 Ditch Witch FX60 Vacuum Excavator, ’06 Ditch Witch JT2020 Mach 1 Horizontal Directional Drill, 2200 hours, Vermeer ST300 Mud System, Ditch Witch 752 Tracker Pipe Locator, ’12 Power Screen 1700A Track Screening Plant w/Vibrating Grizzly, 1100 hours, DUMP TRUCKS: ’13 Cat ct660S Quad Axle, 14,790 Miles, (2) ’07 Kenworth T800 Tri Axle, 98K & 215K Miles, (2) ’97 Ford L9000 Tri Axle, ’04 GMC C8500 Single Axle, 200K Miles, TRUCK TRACTOR: ’99 Kenworth T800, Tandem Axle, TRUCKS: ’12 Ford F550 Flatbed, 10K Miles, ’12 Dodge 5500 Utility, 50K Miles, ’07 GMC 5500 14’ Utility, 120K Miles, ’12 Chevrolet 3500 Utility, 50K miles, TRAILERS: ’71 Rogers 50 Ton Lowboy, ’95 Trailstar 24’ Dump, ’04 Eager Beaver 25PT Tri Axle Tag, ’93 Interstate 40DLA Tag, (3) ’96, ’01, ’05 Interstate 20DT Tags, ’07 Cargo Express 28’ Enclosed, ’12 24’ Box Trailer, (11) TRENCH BOXES: Ranging from 4x20 to 8x20, SUPPORT EQUIPMENT: ’13 Sullair 185 Compressor, Lasers, Levels, Transits, Mueller Tap Machine, Pipe Snappers, Pipe Wrenches & Benders, Declorinator, (2) Ductile Iron Chain Saws, Electric & Gas Air Compressors, Air Tools, Nailers, Staplers, Grinders, Sanders, Impacts, 1” to 3” Water Pumps, Plate Compactors, Jumping Jacks, (13) Partner Cut off Saws, Target 24” & (2) 18” Floor Saws, along w/ Concrete Hand Tools, Hilti Hammer Drills, 4” Core Drill, Chain Saws, Welders, Torches, Welding Tables, Plasma Cutter, Wire Welder, Sewer Machine, Aluminum Break, 2-way Radios, Scaffolding, Generators, Sewer Testing Equipment, Hand Tools and more

dsaauctions.com

Sale Site Phone: 888-841-7386

24 Locations…

TransAxle LLC Becomes OMSI Distributor, Service Center TransAxle has been selected by OMSI Transmissions Inc. as its Northeast region authorized distributor, service center and warranty center. The authorized region consists of all states between Maine and Georgia along the eastern seaboard and Ohio to Tennessee in the Midwest. The product grouping consists of all of OMSI’s axles, gearboxes, hydro-mechanical drives, power take-offs, transfer cases and railway units. To be recognized as an OMSI authorized distributor and service center, Transaxle’s staff was required to take OMSI technical and sales training, meet certain OMSI re-use and rebuild criteria, and must use 100 percent genuine OMSI content for the authorized units.

“We believe the combination of OMSI’s product grouping and our geographical footprint and excellent reputation in terms of taking care of the customer will now provide all of our OMSI customers with an even higher level of service,” said David Olsen, chief executive officer of TransAxle. “With our 24 locations that span from Maine to Atlanta and as far west as Tennessee and Ohio, we will now be able to offer high quality factory authorized service to customers as far west as Illinois with this new program” For more information, call 800/257-0444 or visit TransAxle.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Please visit our website for more information www.dsaauctions.com

Visit CEG’s Web Site at

Auctioneer: Nic Smock - Lic. #AU10500037

www.ConstructionEquipmentGuide.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 113

SAVE THE DATE FOR OUR BIGGEST AUCTION OF THE YEAR!

FLORIDA 2017 FEBRUAR FEBRUARY Y 13-17

Please contact your local representatives: Sales Director - Florida Region Tom Ferguson 954-224-4999 tferguson@IronPlanet.com

Sales Director - Great Lakes/Mid Atlantic Region Steve Gorman 810-241-5339 sgorman@IronPlanet.com

Sales Director - Midwest Region David Kedney 312-636-4234 dkedney@IronPlanet.com

Sales Director - Coastal Region Randy Wynn 704-914-7563 rwynn@IronPlanet.com

Sales Director - Northeast Region Dave Kreis 315-350-4702 dkreis@IronPlanet.com

Sales Director - Gulf Region Chris Deason 318-519-5511 cdeason@IronPlanet.com

Sales Director - Southeast Region George Massey 615-554-4338 gmassey@IronPlanet.com

www.IronPlanet.com/Florida

Managing Sales Director - Canada Sue McGregor 780-238-1560 smcgregor@IronPlanet.com

Cat Auction Services an IronPlanet marketplace

Page 114 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AED SUMMIT/CONDEX ........................................................................................26 ALEX LYON & SON INC MARIETTA OH ..........................................................................................108 ALEX PARIS CONTRACTING CO INC....................................................................9 ALLIED CONSTRUCTION PRODUCTS ................................................................93 ALLU GROUP ........................................................................................................47 AMERICAN STATE EQUIPMENT ............................................................................7 ARING EQUIPMENT CO INC ................................................................................19 ARTIC SNOW & ICE CONTROL ..........................................................................79 ASC CONSTRUCTION EQUIP USA......................................................................11 ASPEN EQUIPMENT ............................................................................................77 ATI CORPORATION/LEVEL BEST ........................................................................47 BANDIT INDUSTRIES INC ....................................................................................90 BARGAINS ....................................................................................................103,104 BLUE RIDGE TRACTOR ......................................................................................41 BOBCAT ENTERPRISES ......................................................................................34 BOBCAT MIDWEST DEALERS ............................................................................28 BOBCAT PARTS OPERATION ..............................................................................33 BOSS PRODUCTS ................................................................................................76 BROOKS TRACTOR ..............................................................................................37 CATERPILLAR ..................................................................................................96,97 CEG SCALE MODELS ..........................................................................................40 CLASSIFIEDS ......................................................................................................105 CLEARSPAN FABRIC STRUCTURES ..................................................................39 CONEXPO..............................................................................................................29 CONSTRUCTION EQUIPMENT GUIDE MINI COMPACT ..........................................................................................46 CONEX/CONAGG PAPER ..........................................................................62 WANTED....................................................................................................106 CONEX/CONAGG MAGAZINE....................................................................78 FLORIDA AUCTION PROMO ....................................................................109 CUSTOM MADE PRODUCTS ..............................................................................16 DEUTZ CORPORATION ..................................................................................39,80 DON SMOCK AUCTION CO LAFOUNTAINE IN ......................................................................................112 DOOSAN INFRACORE AMERICA CORP ............................................................58 DOOSAN PORTABLE POWER ............................................................................67 DOPPSTADT ..........................................................................................................96 DURATECH ..........................................................................................................100 DYNAPAC ..............................................................................................................63 E TIP INC ..............................................................................................................36 EAGER BEAVER TRAILERS ................................................................................31 ERB EQUIPMENT..................................................................................................15 FABICK CAT ............................................................................................................2 FARM-RITE EQUIPMENT INC ..............................................................................12 FELLING TRAILERS ..............................................................................................56 FINKBINER EQUIPMENT CO..................................................................................7 FLANGE LOCK ......................................................................................................37 FLUID CONTROL SERVICES ..............................................................................39 FOLEY EQUIPMENT CO ......................................................................................17 FURY MOTORS ....................................................................................................55 FURY PARTS & SERVICE ....................................................................................52 GARY CARLSON EQUIPMENT ..............................................................................8 GROVE WORLDWIDE ..........................................................................................84 HINIKER NORTHEAST..........................................................................................75 HORST WELDING/HLA ATTACHMENTS ..............................................................79 HOWELL TRACTOR & EQUIPMENT CO ............................................................116

ILLINOIS TRUCK & EQUIPMENT ..........................................................................3 IRAY AUCTION ....................................................................................................112 IROCK CRUSHERS ..............................................................................................94 IRONPLANET KISSIMMEE FL ..........................................................................................113 ISTATE TRUCK CENTER ......................................................................................76 JEFF BELZER ........................................................................................................52 JJ SCHECKEL CORP ............................................................................................30 JOHN DEERE ........................................................................................................60 KAWASAKI - KCM..................................................................................................83 KLEEMAN ..............................................................................................................99 KOBELCO ..............................................................................................................80 KOMATSU AMERICA CORP ............................................................................64,70 KPI-JCI ..................................................................................................................91 KUBOTA ................................................................................................................86 LIUGONG DRESSTA MACHINERY SP Z. ............................................................27 M ADAMS EQUIPMENT CO ..................................................................................25 MCCANN INDUSTRIES INC ..............................................................................6,16 METSO MINERAL CRUSHING..............................................................................89 METSO MINERAL SCREENING ........................................................................101 MID COUNTRY MACHINERY................................................................................23 MINNICH MFG ......................................................................................................36 MUSTANG MFG ....................................................................................................66 NORAM ..................................................................................................................68 PATTEN TRACTOR & EQUIPMENT CO ..............................................................21 PERKINS ENGINES COMPANY LTD ....................................................................35 POWERSCREEN MW DEALER ..........................................................................102 PURPLE WAVE INC ............................................................................................111 RANSOME EQUIPMENT SALES LLC/LRH ........................................................106 RDO EQUIPMENT/MINNESOTA EQUIPMENT ....................................................20 RITCHIE BROS. AUCTIONEERS ........................................................................115 ROAD BUILDERS MACHINERY ......................................................................13,47 ROGERS BROTHERS CORP ..............................................................................52 ROLAND MACHINERY INC ....................................................................................5 RTL EQUIPMENT INC ..........................................................................................94 SANY AMERICA INC..............................................................................................80 SCHAEFER ENTERPRISES..................................................................................44 SCREEN MACHINE INDUSTRIES ........................................................................95 SENNEBOGEN ......................................................................................................92 SMITHCO ..............................................................................................................54 STAR EQUIPMENT LTD ........................................................................................16 TEREX CRANES....................................................................................................82 TEREX FUCHS ......................................................................................................98 THE VICTOR L PHILLIPS CO ..............................................................................34 THUNDERCREEK..................................................................................................24 TOWMASTER INC ................................................................................................51 UTILITY 1 SOURCE ..............................................................................................26 VIRNIG ATTACHMENTS ........................................................................................45 WALLWORK TRUCK CENTER..............................................................................53

OHIO STATE SUPPLEMENT COLUMBUS EQUIPMENT CO ................................................................................8 COMPANY WRENCH ..............................................................................................3 EQUIPMENT CORP OF AMERICA ........................................................................7 JCB OF OHIO ..........................................................................................................7 THE MCLEAN CO ....................................................................................................5

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 3, 2016 • Page 115

Unreserved Unr reserrved p public ublic equipment auctions Spec Special ial limit limited-time ed-time fin financing ancing off offer! ffer! ff er! No p payments ayments ffor or 120 d days* ays*

2015 Caterpillar D6T LGP VP | St. Louis

5 – 2015 Caterpillar 745C 6x6 | Kansas City

1 of 2 – 2010 John Deere 544K | Chicago o

2008 Caterpillar 330DL | Chicago o

2016 Freightliner 122SD | Minneapolis

2015 Caterpillar 972M | Kansas City

Unused – 2016 Case CX55B | Columbus

Caterpillar CP563E | St. Louis

2013 Link-Belt RTC8030 Series II 30 Ton 4x4x4 | Kansas City

49,295+ 49,295+ items items in 80+ auctions inc including luding Columbus, OH Raleigh-Durham, NC Los Angeles, CA Chicago, IL Sun Valley, CA Saltt Lake City, UT

Dec 7 Dec 8 Dec 9 Dec 9 Dec 10 Dec 12

Albuquerque, NM Manchester, NH Denver, CO Norrth East, MD Kansas City, MO Chehalis, WA

Dec 13 Dec 13 Dec 14 Dec 15 Dec 15 Dec 16

Minneapolis, MN Nashville, TN St. Louis, MO

Dec 20 Dec 20 Dec 21

Financing & leasing available Up to 100% financing, with no moneyy down.

Auctioneer Au ctioneer CChad had M. Johnson # 17668, Ritchie Ritchie Bros. Bros. Au Auctioneers ctioneers (Americ (America) a) Inc. Inc. Au Auction ction CClerk lerk License #225, Au Auctioneer ctioneer Gr Gregory egory M. Highsmit Highsmithh # 701, Au Auction ction CCompany ompany License # 001348, Au Auctioneer ctioneer Gr Gregory egory SS.. FFuqua uqua #AU002665, #AU002665, Auction Auction Company Company Bond #0470724, Au Auctioneer ctioneer PPatrick atrick J. Hicks Hicks Bond # 0470727, Au Auction ction Firm # 2008000166, Au Auctioneer ctioneer Ed Eddie die R. Gr Graham aham # 62198943559, Au Auction ction Firm License #6980, M Motor otor Vehicle Veehicle De Dealer aler License #0061711, Au Auction ction CCompany ompany Bond #0470724, Au Auctioneer ctioneer John Korrey Korrey Bond # 0470729, Au Auction ction Firm License # 444.000193, Au Auctioneer ctioneer Gr Greg eg M. Highsmit Highsmithh # 441.000865, Au Auction ction CCompany ompany Bond #0470724, Au Auctioneer ctioneer Gr Greg eg Highsmith Highsmith Bond # 0470728, Used Used Motor Motor Vehicle Veehicle Dealer Dealer License #2647, Au Auctioneer ctioneer Fr Frederick ederick R. VVilsmeier ilsmeier Lic # 6065, Au Auctioneer ctioneer Gr Gregory egory SS.. FFuqua uqua Lic # 3078, M Motor otor VVehicle ehicle De Dealer aler License #DLR25867, #DLR25867, Au Auctioneer ctioneer John L. Korrey Korrey # 7016005, Au Auction ction CCompany ompany License # 1981, Motor Motor VVehicle ehicle Dealer Dealer License #1539, Au Auction ction Firm #2389, Au Auctioneer ctioneer Ed Eddie die R. Gr Graham aham #2237, Au Auction ction Firm License # 444.000193, Au Auctioneer ctioneer Gr Greg eg M. Highsmith Highsmith # 441.000865, *OAC. *OAC. TTerms erms & conditions conditions apply. applyy. Se Seee rbauction.com/financing. rbauction.com/financing.

Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

More items added daily Call about selling: 1.800.211.3983

rbauction.com See full auction & equipment listing gs at rbauction.com

Page 116 • December 3, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE