Midwest 22, October 26, 2024

Published Nationally

$3.00

®

Midwest Edition

October 26 2024 Vol. XXX • No. 22

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Manufacturing Express Stops at Wacker Neuson Facility in Wisconsin...16

Fabick Cat Welcomes 175 Guests to Customer Open House...18

Evan Isom, Treasure Advertising photo

Price Brothers Management Companydeveloped AdventHealth Sports Park at Bluhawk in Overland Park, Kan., will open Oct. 26. The multipurpose sports complex will anchor a larger retail, living, dining and

By Ruksana Hussain CEG CORRESPONDENT

Louisville, Ky., Welcomes Landscaping Industry for 2024 Equip Expo...24

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Crawler Loaders, Dozers, Undercarriages & Parts Section . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-45 Paving Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-71 Snow & Ice Section . . . . . . . . . . . . . . . . . . . . . . . . .83-87 Business Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 Auction Section . . . . . . . . . . . . . . . . . . . . . . . . . . . .91-97 Advertisers Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

entertainment venue. The sports park is envisioned as Kansas City’s premier indoor multisport complex and regional sports hub with modern amenities.

Funding for the billion-dollar project is through both private sources and Kansas STAR

bonds state incentive program, which are Kansas sales tax revenue channeled toward projects anticipating major visitor traffic. While the total property area covers 277 acres, the sports complex accounts for 420,000 sq. ft. see BLUHAWK page 82

Everything Old Is New Again Modern V2X Tech Offers Info Truckers Still Like in Vintage CB Radios

Adobe Stock photo

The vehicle-to-everything (V2X) concept, on the DOT’s CEG CORRESPONDENT drawing board for approximately 30 years, is being touted as a cutting-edge mechanism for U.S. highway safety and efficiency.

By Lucy Perry

The technology enables vehicles to communicate with each other as well as pedestrians, cyclists and roadside infrastructure. It’s being compared with vintage technology still appreciated by truckers around the world. see COMMUNICATION page 92

Page 2 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2019 CAT D6N XL | $242,500

2016 CAT 950M | $135,900

2014 CAT D8T | $385,000

2016 CAT 12M3 | $129,000

2018 CAT 336F | $165,000

2015 CAT 313FL GC | $109,000

2019 JOHN DEERE 944K | $CALL

2021 CAT 982M | $449,000

2011 KOMATSU WA600 | $125,000

SN: NJN00384 | Hours: 2,954

SN: N9F00545 | Hours: 6,820

SN: 1DW944KSTJF691406 | Hours: 22,087

SN: FTR00934 | Hours: 6,362

SN: SSN20042 | Hours: 5,286

SN: XDL00733 | Hours: 5,146

636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI

SN: FCT01217 | Hours: 6,877

SN: HDK00162 | Hours: 2,191

SN: 60803 | Hours: 21,420

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 3

563-8 872-4 41112

Bellevue (Dubuque), Iowa sales@jjjscheckel.com

AT D11T - Call foor Price 2018 CA

for $ C AT D11T - CALL 2012 CA

p ocess now, Zero hour Powertrain PPlus Rebuild, In pr i h 4 yearr,, 6,000 hour warranty.y 1000% New UC, with l d SS Ripper. Full details on ouur website.

U BBlade,

8,781 Hours on Cat dealer documeented total rebuild. p y. UC like new, mpan Light use tractor from power com dd price. for addt’l Rear cwt, Rippers in stockk fo

ATT D9T’s - $688,000 EA. CA ) ((2)2014

2018 CA AT D8T - $485,000

5,225 Total frame hours, h 1,5566 Neutral N l hours, h 3 600 AAcctuall workkiingg idl 3,600 1,200 at idle, h T l hours, 700 Total 44,700 b w/tilt, Single g shankk 3,669 Actual workingg hours. SU blade p , SU blade, Single g oups hours. 100% New track gr i i l paint,, Super clean! shank ripperr,, OOriginal history. mentedd hi ripperr,, Matching pairr,, 1 Ownerr,, Full docum

2019 CA AT 390FL - $7888,000 ,

$ AT 374FL - $588,000 2020 CA

, , AT D10TT - $1,488,000 2011 CA

AT D110T2 - CALL for $ 2016 CA

, AT D8TT - $388,000 2012 CA

2022 CA AT D6 LLGP VP PA AT - $$438,000 ,

2018 CA AT 336FL MH - $528,000 ,

((2)2023 ) CA ATT 980’ 9 s - $548,000 Ea.

Rb Pl Rebuild, i Plus h Powertrain Z hour AAvvailable now, Zero Only 4,905 original hours. Low time, light use tractor ik new, Hyydraulic with 4 yearr,, 6,000 hour waarranty.y 100% New UC, from po p wer company.y UUC measures like dd price. for addt’l on our website. ladder, d l d SS Ripper. Full details U BBlade, dd U blade, Rear cwtt, Rippers in stock fo

, CAT D10T - $688,000 2007 CA

j , j offff job hi just 12,638 Hours, Goodd usedd machine Veryy ggoodd ipp , Ve M l i h k ripper SU Blade, Multi-shank i new. history since D l service hi Undercarriagee, Dealer

2020 CA AT D6 XE LGP - $298,000 ,

G d withh assist, A03323. VPPAAT. Ne Next Gen, G Pow P ershif h fftt w// Electric El drive, d ly 2,827 A03321. Next Gen. 3,3310 Hours, 3DD Grade idl Only 1,843 at idle, h g frame hours, 4,670 Original GPS readyy. Machinne is as good g as theyy come.

6,324 hours, GPS Readyy,y, Aux hydraulics, y Heavy duty i h w SU blade, Paccar winch, i g hours. New p ating actual oper l & origi i new. U/C, Straight Mac hi with i lots of idle time recorded.

Straight, clean i iinal.l Dealer D l ownedd since M chine dd i Repuutation machine.

Original O i i l paint,

2018 CAT 966M - $210,000

A03178. 3,7000 Frame F h hours, 1,016 0 6 Idle dl hours, h 2,684 Actual workingg hours. 14’4”” Stick, Quick couplerr,, As clean as they h come from exccellent home.

Yearr,, 2,000 hour warrantyy on 6,575 Total hours. 2 Ye ik 13’6””Stick, 2 powertrain + hyydraulics until 2026. k Documenteed service history.

Yard 76”” bucket.

6.5 Ya

500 To Totall hhours, 2,0000 at idle. idl Factory F y warrantyy till il New J.J. Scheckel Material Handler H Conv C ersion i pk pkg, 3,500 ggregate Handler H r,, Payyyloadd M Monitorr,, NNew i k Dec. 2024, Agg 2,200 Hours, 54’Total reach, New 30’’ Boom, 24’’ SStick, k 85% wt, Buccket or grapple available.

8 yard buckets, % Michelins, OOriginal i i l paint.

Hydraulic lifftt cab, CCw

W 4,628 Working h Idl hours, 7,194 Frame hours, 2,566 Idle Yard GP bucket, p , 5.5 Ya q coupler hours. Hyydrauliic quick condition.

O i Original OOriginaall paint,

2020 CA AT 745 - $488,,,000

(4)2019 CA ATT 745’s - $$280,000 , Ea.

(6)2021 ) Volvo A45G G’s-$398,000 $ Ea.

(2)2019 ) Volvo A25G’s - $288,000 , Ea.

A03221. 2,921 Total hours, 898 at idl dlle, Tailga lg te, Excellent Bridgestone rubberr,, Full histoory available, il N clean truck.

Nice

((2)2018 ) Volvo A45G & K-TTe Tec 1233 Scraper p Packages g - $648 $ 8,000 , Ea. S

77,300 300 hour h range g , 3,000 hours at idle, dl Transmission upda pd te with warrrantyy, Full history available, il bl Clean Cl trucks with original o i paint.

66,000 000 HHours, 3 Ye Year reemainingg fac f toryy warrantyy till 2027, 1 Ownerr,, 1 fleet fl t trucks. k Rent or Rent// Purchase option entire pkgg, $16,500/month ea.

2017 John Deere 95200RX & Deere 2014 Case IH S Steig e gger ge 580 Quadtrac Quad ac 2412DE Scraper p Pkg g- $388,000 g $ , andd 2014 K-T K Te Tec 12233 Pkg Pkg $$448,000 $448,000

2014 Volvo A40G - $$298,000 ,

7,740 Total hours, 3,,673 Idle hours, 4,067 Actual A workingg hours. 875 Radials, Volvo dealer tested i andd inspected d, Exceptionally clean.

2012 CA ATT 8225H - For ren nt onlyy.

5,480 , original g hours, Multi-monthh ren entall available il b ll t ffeeet, Original igi l ppain i t, h e in i the h countrryyy,, EExcellen 55,848 848 Hours on the h truckk, 2 YYeear Volv l o Powertrain i 4,588 588 Hrs H , 24 YYaard scraper p r,, Ex E trem mely ly clean l andd well 2,950 Hours, 488 Hours on new n tracks k . K-TTeec 33 yard anywher Pre-emissions i i , Tililt bl bladde, EExcellen ll t 1 owner w machine hi Warranty till 2025. New tires. Matching pair available. maintained. Dealer testedd & inspeectedd w// ffullll hi history. scraper. Extremely clean & well maintainedd units i .

visit

JJScheckel.com

for detailed photos, videeos, and descriptions!

4 400 Hours, 4,400 H 2 Ye Year Volvo Powertrain i Warranty W y Remaining till 2025. Matchingg Radials, As clean as they h come. Volvo V l Dealer D inspected and tested. i

2009 CA AT RM500 - $348,000 ,

3,610 Hours, Reeputa p tion i machine, hi Universal U i l Rotor R foor both b h asppphalt h l reclama l tion i or soilil mixing ii , i system, Full Water emulslsion F ll service i history. hi

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide. We are easy to work with & will not be beaat on price and terms!

Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G/A45G Compaction, Wheel Loaderss, Scrapers, and much more.

63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com @jjscheckel.com scheckel com | follow us ffoorr daily updates: WE OWN WHA ATT WE W ADVERTISE! call: 5663

Page 4 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION

IN THIS ISSUE

®

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

8

FEATURES 8

14

32

WOOD DUCK ANSWERS CALL TO LANDSCAPE WITH DEVELON

Jack Eike grew up idolizing his grandfather and the landscaping industry. His grandfather operated a tree farm in central Iowa, and it’s where Eike’s interest in outdoor design took root.

14

OHIO FORESTRY ASSOC. HOLDS 66TH ANNUAL PAUL BUNYAN SHOW

64

CIM SEEKS DONATIONS FOR 2025 AUCTION AT WORLD OF CONCRETE

The Paul Bunyan Show is one of the oldest and largest forest industry trade shows in the country, promoting Ohio’s forest products industry. The 66th annual show was held Oct. 4, 5 and 6 in Cambridge, Ohio.

The CIM program — a business-intensive program that awards students with a four-year Bachelor of Science degree in Concrete Industry Management — is seeking donations for its 2025 CIM Auction to be held at World of Concrete.

16

74

MANUFACTURING EXPRESS STOPS AT WACKER NEUSON FACILITY

FABICK CAT TECH ADVANCES TO REGIONALS IN CAT CHALLENGE

The Association of Equipment Manufacturers’ (AEM) Manufacturing Express paid a visit to Wacker Neuson America Corporation in Menomonee Falls, Wis., on Oct. 15.

Fabick Cat announced that Jack, lead service technician of the company’s Madison, Wis., location, is heading to Cat’s Global Dealer Technician Challenge in Tucson, Ariz., this December.

18

78

FABICK CAT HOSTS FALL CUSTOMER APPRECIATION, DEMO DAY

PALFINGER STRENGTHENS PARTNERSHIP AT INAUGURAL NA DEALER CONFERENCE

Fabick Cat welcomed 175 guests to its Fall Customer Appreciation and Demo Day at its Springfield, Mo., branch, located at 2222 E Kearney St., on Oct. 4, 2024.

Palfinger, a producer of innovative lifting solutions, recently celebrated its North American success at the company’s inaugural dealer conference. The event brought together dealers from across Canada, Mexico and the United States.

20

78

WST’S RYAN STUMPH WINS JOHN DEERE TECHNICIAN AWARD

BRANDT LAUNCHES ITS HIGH-OUTPUT HYDROVAC IN U.S. MARKETS

West Side Tractor Sales announced that Ryan Stumph has been awarded Territory Champion of the John Deere Technicians of the Year Award. He is one of 59 John Deere technicians being recognized in the United States.

In response to the increasing need for hydrovacs that combine full-sized capacity with maneuverability and precision, Brandt Industries has released its hydrovacs to contractors across the United States.

24

86

LOUISVILLE WELCOMES LANDSCAPING INDUSTRY TO 2024 EQUIP EXPO

GUIDELINES PREVENT DAMAGE DURING SNOW, ICE REMOVAL

The 2024 Equip Expo was held at the Kentucky Exposition Center in Louisville, Ky., Oct. 15 to 18. Equip Expo is one of the largest events for professionals in the landscaping, hardscaping and outdoor power equipment industries.

Western Specialty Contractors, experts in parking garage restoration and maintenance, offer several tips to minimize unnecessary damage to parking structures during the winter months, and keep drivers safe.

32

94

MINN. FALL MAINTENANCE EXPO FEATURES EQUIPMENT DEMOS

The Minnesota Fall Maintenance Expo was held Oct. 2 to 3 at the St. Cloud Public Works Facility in St. Cloud, Minn. Attendees were eligible to receive .5 credits/day towards the Roads Scholar Program Maintenance Certificate.

Founder Emeritus (1930-2021) Edwin M. McKeon Sr. Midwest Publisher Joseph S. McKeon Executive Publisher Teddy McKeon Editor In Chief Craig Mongeau Senior Editor Andy Gotlieb Editorial Assistant Katherine Petrik Production Mgr. John Pinkerton Controller Judith Nixon Circulation Mgr. Cathy Printz

Facebook

Twitter

JOHN DEERE PREMIERES ITS NEXT PHASE OF P-TIER DOZERS

42

CEG’S CRAWLER LOADER, DOZERS COMPARISON CHARTS

43

CAT MEDIUM DOZERS RECEIVE TECHNOLOGY PACKAGE UPGRADES

44

HYUNDAI ADDS PRODUCT CATEGORY; INTRODUCES HD100 TRACKED DOZER

R

DEPARTMENTS

89 91

BUSINESS CALENDAR COMING AUCTIONS

EQUIPMENT 36 53 56 60 62 83 83 86

HUSQVARNA Large Floor Grinders FAE RPL/SSL-45 Asphalt Shredder VOLVO SD125 Soil Compactor DYNAPAC Tandem Asphalt Rollers VÖGELE SUPER 2100-5i Paver BOSS Genesis Liquid Deicing Series BLUE DIAMOND Heavy-Duty Snow Blower BUYERS PRODUCTS Straight Blade Plow

Joseph S. McKeon

Kent Hogeboom

Natalie Spain

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

• National Sales Manager

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

Key Accounts Manager • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Cell e-mail

Web site www.constructionequipmentguide.com Advertising e-mail production@cegltd.com

LinkedIn

High school students from across Chicagoland took steps toward careers in the equipment industry by learning essential diesel engine repair skills, trying their hand at operating equipment and polishing their interview techniques.

40

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910

Mobile

STUDENTS ATTEND SKILLSUSA ILLINOIS APPRENTICESHIP EVENT

CRAWLER LOADERS, DOZERS SECTION

YouTube

773/769-4090 312/953-0375 jmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

260/760-0521 nspain@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034.

Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 5

Reliable Equipment, Responsive Service.

Used Sales:

217-789-7711 rolandmachinery.com

We are hiring!

2018 PC88MR-10 $74,500 2017 KOMATSU HAMM HD+110IVT $103,000 STK# KM2023642 3600 HRS, Springfield, HM17056, 703 HRS, Cape Girardeau,IL MO

2019 $385,000 2019 WIRTGEN WIRTGENW120CFI W120CFI $435,000 STK# HRS, Springfield, IL 3210/WG2021088, -,- , (/1148 * /%$3(/3#"! (/

2020 KOMATSU $175,000 KOMATSUWA270-8 WA270-8 $175,000 STK# KM2022362, 649 HRS, DeForest, 3210/1.-,--&+-(/+* /%$3(/ " (/WI

2016 $259,000 2019 KOMATSU KOMATSU931.2 PC170LC-11 $155,000 STK# VT2022024, 9946 ,/%$3(/ !

HRS, Escanaba, MI 3210/1.-,--&'*(/-& " (/

2022 KOMATSU $195,000 KOMATSUWA320-8 WA320-8 $205,000 STK# KM2022647, 533 HRS, Springfield, IL 3210/1.-,--+*)(/'&&/%$3(/3#"! (/

2020 PC210LC-11 $149,500 2013 KOMATSU HAMM HD12VV $19,500 STK# KM2023069, Springfield, IL 3210/%.-,-&, /&-& /%$3(/ " (/

2014 KOMATSU $99,500 KOMATSUD37PX-23 D37PX-23 $99,500 STK# KM2023250, 2204 HRS, Palmyra, MO 3210/1.-,-&-',/--,*/%$3(/ " (/.

2017 $249,000 2017 KOMATSU KOMATSU931.2 931.2 $305,000 STK#VT2023001, 10,292 HRS, Escanaba, MI 3210 2-,-&,, (/ ,(- -/%$3(/ (/.

2008 GRADALL XL4100 II $58,000 2020 KOMATSU PC170LC-11 $149,500 3210/ -,--' /)( *'/%$3(/ ! " (/ IL STK# KM2024104 1380 hours, Bolingbrook,

2016 KOMATSU KOMATSUPC210LC-10 931.2 $315,000 2014 $154,500 3210/ 2-,--,-*(/ *+/%$3(/ (/.

STK# KM2023319, 3628 HRS, Eau Claire, WI

KOMATSUPC210LC-11 PC210LC-11 $239,500 2020 KOMATSU $205,000 3210/1.-,--,*,(/+ -/%$3(/ ! " (/ STK# KM2022040, 682 HRS, Bolingbrook, IL

2018 WIRTGEN HAMM HD+110IVO $104,560 2011 W120F $149,500 3210/%. ,++/))&/%$3(/ STK# WG2024000, 6214 HRS," " ! (/ Columbia, MO

VALMET840.3 840.3 $95,000 2008 VALMET $95,000 3210/ 2-,--,+&(/-'(*++/%$3(/ (/.

STK# VT2022063, 25,466 HRS, Escanaba, MI

2017 CAT KOMATSU PC88MR-10 $135,000 $55,000 2020 D3 3210/1.-,--+ " (/ STK# CT2024012,-(/' 1170 +/%$3(/ ! hours, DePere, WI

KOMATSUPC228USLC-10 PC228USLC-10 $149,500 2015 KOMATSU $135,000 3210/1.-,' +(/*,+ STK# KM2021516, 4061 /%$3(/ HRS, DePere, WI(/.

2020 VOLVO KOMATSU PC240LC-11 $220,000 2021 EC750EL $359,500 3210/1.-,--, (/ STK# VO2024002,)(/-&-&/%$3(/3#"!

6329 hours, Escanaba, MI

17 Branch Locations in IL, IN, MI, MO, WI

Page 6 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mike Garrard • (630) 492-9115 Bolingbrook, IL Contact us at Used@McCannOnline.com

View our complete Used & “Like New” inventory at McCannOnline.com

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Channahon 815-467-4480 2021 Case TV450B, S/N JAFTV450KLM487291, 541 Hrs, CAB/AIR/HEAT, 2 SPEED, HYDRAULIC COU- 2017 Case 621G, S/N NGF240021, 13131 Hours, Cab/Air, Ride Control, ACS Coupler, PLER, 84" GP BUCKET, HIGH FLOW PERFROMACE PACKAGE, SERVICED AND READY 2.5 Yard GP Bucket, Forks, Z Bar, Heavy TO GO, UNIT WILL HAVE A NEW DOOR ...... Counterweight, Limited Slip Diffs, Cold ........................................................$69,900 Weather Package ..........................$109,900

2023 Case 521G, S/N NNF254914, 73 Hrs, 2022 Case SR270B, JAFSR270HNM410725, Cab/Air/Heat, Ride Control, Deluxe Cab, JRB Coupler, 2.5 Yard GP Bkt, Third Valve, Limited 222 Hours, Cab/Air, 2 Speed, High Flow, Slip Differential, Pro Care Full Machine Hyd. Coupler, 78" GP Bucket Radio, E-H Controls ..........................................$69,900 Warranty until 10-31-25 or 3000 hrs $179,900

Chicago 312-942-9200 Crestwood 708-597-3110 Wauconda* 847-526-9444

Indiana Merrillville 219-576-7800

2022 Case SV280B, 171 Hours, S/N JAFSV280HMM403668, CAB/AIR/HEAT, HYDRAULIC COUPLER, 72" GP BUCKET, 2 SPEED, RADIO, EXCELLENT CONDITION FULL MACHINE WARRANTY UNTIL 11-2224 ....................................................$51,900

2023 Case TR270B, S/N JAFTR270LNM421971, 281 Hours, CAB/AIR/HEAT, E-H CONTROLS, HYDRAULIC COUPLER, 78" GP BUCKET, RIDE CONTROL, SELF LEVEL, HIGH FLOW HYDRAULICS, REARVIEW CAMERA, PRE2022 Case TR340B, JAFTR340AMM403705, MIUM DISPLAY MODULE, FULL MACHINE 148 Hours, Cab/Air, 2 Speed, Hyd Coupler, WARRANTY UNTIL 1-30-25, JUST SERV84” GP Bucket, Radio, E-H Controls $77,900 ICED READY TO GO ........................$59,000

Mishawaka* 574-406-6800 2018 Case CX245DSR, S/N NJS7K1152, 1306 Hours, Cab/Air, Kent Coupler, Aux Hydraulics, No Bucket, Bucket available at additional charge, Rental Fleet Roll Out .......... ......................................................$193,500

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

Schereville* 219-865-6545

Michigan Marne* 616-371-7250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 7

Sakai R2H-4 - ’19, approx. 900 hrs.

Carlson CP130 - ’19, approx. 1350 hrs.

83” triple drum static ..........................$93,800 22,500lb, 8-15’ paving width..............$138,400

LIEBHERR L586X - ’18, approx. 3100 hrs.

8.5cyd, Wide tires, Loadrite scale ....$297,400

ROLLERS

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

EXCAVATORS

Sakai R2H-4 static roller - ’19, approx. 900 hrs., #C003039 ....................................$93,800 Sakai SW850ND - ’18, approx. 2300 hrs.

Double drum Oscillatory, tier 3 ..........$102,800 Sakai SW300 - approx. 450 hrs, 39” drum, #C000211 ............................................$26,850.

Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ..................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ..............$P.O.R.

BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Out Conveyor ............................$174,000 Roadtec RX-300 - ’18, approx. 600 hrs.

4’ drum ..............................................$325,000 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900

LIEBHERR A924 LITRONIC – (‘22), 24 hrs, C005139...$CALL

LIEBHERR L550 XPOWER – (‘23), 10 hrs, #C005780…$CALL

LIEBHERR R914 COMPACT LITRONIC – (‘24), 9 Hrs, #C005794..$CALL

Large Selection of New & Used Equipment in Stock.

AGGREGATE EQUIPMENT

LOADERS AND EXCAVATORS:

JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ................$295,000

LIEBHERR L550 XPOWER, (’17), an innovative machine concept which combines performance, fuel efficiency, robustness and comfort. With their power split driveline, XPower wheel loaders work with the greatest level of efficiency in all applications, #C003118 ....................................................$159,000 LIEBHERR R920 COMPACT LITRONIC, (‘18), 253 Hrs, w/Werk-brau pin grabber coupler, medium & high pressure aux. hydraulic circuits, pattern changer, #C003330 ........................................................$CALL LIEBHERR R934 LITRONIC, (‘23), 300 Hrs, The new R934 weighs approx. 35 tons, completely updated design is characteristic of the new range of "generation 8" machines, #C005399 ............................$CALL LIEBHERR R936 COMPACT LITRONIC, (‘18), 450 Hrs, Convenient and service-friendly, the R 936 Compact makes for safe working. With its tight slewing radius, this machine is especially well suited to urban applications, #C003377 ..........................$CALL LIEBHERR R956 LITRONIC, (‘22), 1,532 Hrs, 35' boom and 21' stick, #C004867 ........................$CALL SAKAI SW354, (’18), #C003395....................$31,900

BROOMS SUPERIOR BROOM DT74J, (‘18), 1,017 Hrs, noise level in cab, rear leaf spring susp., #C003649 ........$39,000

CRUSHING AND SCREENING

ASTEC GT104 - ‘17, 325 Hrs, 5.25cyd Hopper, BROOMS 4’x9’ Top & Bottom Screens, #C001154............ ..........................................................$161,700 Superior DT74J - ’19, approx. 1300 hrs. AC, KPI FT2650 – ’19, approx. 1800 hrs.

Side shift, gutter brush, #C001774 ......$39,600 Tracked jaw crusher ..........................$645,000

MILLING MACHINES

ASTEC ROADTEC SB3000 – (‘23), #C005525, 31 Hrs..$CALL

PAVERS / ROAD WIDENERS Mauldin 1560 paver – ’22, approx. 600hrs.

8-14’, electric screed heat ..................$119,800 Midland SPR-6 widener – ’23, approx. 300 hrs.

6’ RH only, legal haul..........................$155,400 P.O.R. items may be on rent causing pricing and hours to vary.

Contact Chuck or Ross in Illinois

1-800-307-0221

crhodes@finkbiner.com rnoles@finkbiner.com

www.finkbiner.com

CRANES GROVE GHC85, (’23), 164 Hrs, #C005208 ......$CALL GROVE GHC130, (’19), 932 Hrs, 130-ton lift capacity, #C004141 ................................................$1,099,000 GROVE GRT880, (’22), 807 Hrs, 80-ton lift capacity, #C005002 ....................................................$885,850 GROVE GRT880, (’18), 2,476 Hrs, 80-ton lift capacity, #C004982 ....................................................$628,750

HAUL TRUCKS LIEBHERR TA230 LITRONIC, (‘23), 361 Hrs, #C005550 ........................................................$CALL LIEBHERR TA230 LITRONIC, (‘23), 367 Hrs, #C005511 ............................................................................$CALL Milwaukee, WI 1-800-236-6900

Wausau, WI 1-800-242-7113

Forest Lake, MN 218-393-0979 Product Support: 218-730-3700

Duluth, MN 218-260-0581 Product Support: 218-730-3700

Crushing & Screening Div. Little Chute, WI 1-800-236-8318

For information on our in-stock equipment, contact Matthew Pehler at:

mpehler@amstate.com or mobile 1-414-719-8700 or 1-800-236-6900 Visit us at: www.amstate.com

Page 8 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wood Duck Answers Call to Landscape With DEVELON Jack Eike grew up idolizing his grandfather and the landscaping industry. His grandfather operated a tree farm in central Iowa, and it’s where Eike’s interest in outdoor design took root.

“I grew up helping my grandfather during the summers, and any school breaks that I had, I’d always come to Iowa and help gramps on the farm,” Eike said. “As I got older, this naturally evolved into a career path. I began to think, ‘What am I really good at, and what do I want to do fulltime?’ Landscaping was a natural extension of the nursery I started with.”

Splitting time between family in Texas and Iowa, Eike enjoyed being outdoors and helping grow plants at the tree nursery. Soon he felt a call to pursue a career in landscaping. After he graduated from high school in 2019, he and his father started Wood Duck Landscapes. He was encouraged to attend college, so he enrolled at Iowa State University in Ames, Iowa, where he majored in entrepreneurship.

While at Iowa State, he continued working and soon realized that college wasn’t for him. The COVID-19 pandemic in 2020 contributed to his decision to leave college and pursue his dream of working full-time in the landscaping industry.

DEVELON photo

Jack Eike, president of BluGrade Earthworks, also works with Wood Duck Landscapes – the family business.

Entrepreneurial Spirit Wood Duck Landscapes is a full-service outdoor landscaping company. The firm’s specialties are grading, seeding, irrigation, patio installation, landscape lighting, hardscaping and more, primarily for homeowners.

Most of the company’s landscaping and hardscaping work

is at Lake Panorama near Panora, Iowa. The lake community has approximately 1,500 homes, and Wood Duck Landscapes has completed 200 projects in the area since 2019.

Based on the early success of Wood Duck Landscapes, Eike added a second company in 2021 called BluGrade Earthworks. The sister company focuses on site work, including excavating, grading and trucking — a natural complement to his landscaping business.

“Our goal is to create a one-stop shop for homeowners, where our clients are dealing with one salesman or one project manager,” Eike said. “They can get any kind of patio, retaining wall or lawn feature that they’re after. And if they’re looking to build a new home, we can help them from start to finish on the exterior of the property — from clearing and flattening the land to digging a foundation for a new home. After that, we come back in and finish the property or the lawn with Wood Duck Landscapes.”

Eike’s decision to pursue a career in landscaping in place of a college degree is an example of something becoming more common in the Gen Z age group (typically defined as those born between the late 1990s and the early 2010s). According to a story that appeared in the Wall Street Journal, more young people in their late teens and 20s are choosing careers in skilled trades due to the rising pay and increased use of technology. Some individuals in this generation don’t want to be saddled with college debt for years after completing their degrees.

A significant factor in Eike’s decision to pursue landscaping as a career was his love of the outdoors and the satisfaction of seeing projects completed. see DEVELON page 72

DEVELON photo

DEVELON photo

DEVELON photo

Jack Eike purchased a rotating grapple attachment and a quick coupler, and he paired them with a DEVELON DX62R-7 mini-excavator from RTL Equipment.

Wood Duck Landscapes uses a mini-excavator and compact track loader for many of its projects due to confined job sites and the many times operators are moving materials in tight spaces.

As the excavator removes the material, the compact track loader loads it in the bucket and transports it out of the area.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 9

2022 CATERPILLAR D9-07A, ID# WUC0205, SN JC200244, 1275 HOURS ....................$1,282,500

2022 CATERPILLAR 980-14, ID# XUC0047, SN MK700258, 2415 HOURS ......................$520,100

2021 CATERPILLAR 735-04, ID# UGN0245, SN 3T500302, 1420 HOURS........................$420,700

2019 CATERPILLAR 963K, ID# UUR0081, LBL00916, 2675 HOURS ............................$248,400

2017 CATERPILLAR 1602M3AWI, ID# TUC0205, SN N9T00249, 6140 HOURS ......................$221,600

2022 CATERPILLAR 308-07CRSB, ID# 2CR8345, SN GG806594, 1205 HOURS ......................$114,236

2023 CATERPILLAR CB7-02, ID# XUC0080, SN M5R00310, 225 HOURS ........................$113,000

2018 CATERPILLAR TL1255D, ID# 8CR6523, SN ML701115, 3680 HOURS ............................$109,360

2020 CATERPILLAR 420-07, ID# 2CR8431, SN H8T00521, 1860 HOURS ........................$85,120

2021 CATERPILLAR 289D3, ID# 2CR8281, SN JX910757, 765 HOURS............................$68,100

2023 CATERPILLAR 239D3, ID# 3CR8874, SN RWK00856, 305 HOURS ..............................$48,500

2016 GENIE GTH5519, ID# 1AR6730, SN GTH5516M-5096, 1005 HOURS ..............$44,400

2022 CATERPILLAR 301.7-05, ID# 2CR8205, SN JH706929, 426 HOURS ..........................$32,100

2020 CATERPILLAR CB1.7-03, ID# 0CR7222, SN 064300245, 1383 HOURS........................$21,800

2018 CATERPILLAR 300.9D, ID# 9CR6795, SN LJ201187, 822 HOURS ............................$17,900

2017 TORO COMPANY TX427, ID# 7AR9127, SN 316000272, 895 HOURS ................................$11,000

Page 10 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 11

JD 130G, Cab, A/C, Hydraulic JD 135G, A/C, 9’11” Arm, 24” JD 210G, A/C, Hyd Thumb, JD 245G, A/C, Aux Hydraulics, JD 26G, ROPS, 3’10” Arm, Coupler, 9’7” Arm, Rev Fan, 9’7” Arm, 32” Shoes, Air Seat, Aux Hydraulics, Blade, #262039.. Thumb, Aux Hyd, 9’11” Stick, 24” Shoes, Reduced Tail Swing, ......................................$34,000 Shoes, #261469 ..........$109,000 #249203 ........................$85,000 #261276 ......................$127,500 #262242......................$204,000

JD 290G, Cab, A/C, Coupler, 10’2” Arm, 32” Shoes, New JD 350G, A/C, 72’ Long Reach, JD 672G, Cab, A/C, 14’ Blade, JD 770G, Cab, A/C, 14’ Blade, JD 350G, A/C, Aux Hyd, Reman Engine, #250559.............. Coupler, 13’1” Arm, 32” Shoes, Rev Fan, 32” Pads, 60” Bkt, 14.00 Tires, Push Block, Auto 14.00 Tires, Scarifier, Aux Hyd, ....................................$120,000 #261396 ......................$109,000 #261824 ......................$245,000 Shift, #250229 ............$140,000 #247935 ....................$115,000

JD 650K, New Engine, A/C, JD 550K, A/C, XLT 18” Pads, JD 331G, A/C, Hi Flow Aux, JD 700K, A/C, Smartgrade, LGP JD 750K, Cab, A/C, 34” Pads, LGP 28” Shoes, 6 Way 128” Smartgrade, LGP, 6 Way 156” 2 Speed, Ride Control, #262952.. 6 Way 105” Blade, 4th Function 30” Shoes, 6 Way 144” Blade, ......................................$69,000 Aux, #262480 ................$109,000 Blade, #261468 ..........$139,000 #261368......................$169,000 Blade, #251152 ..........$179,000

JD 844K-III, A/C, Scale, Joystick Steer, 8 YD GP Bucket, Warranty, #261515 ....$238,000

JD 950K, Cab, A/C, Winch, LGP, 30” Shoes, 6 Way 184” Blade, Warranty, #251233 .......... ....................................$295,000

JD 544K-II, A/C, Rev Fan, 20.5 JD 644K, A/C, Coupler, 3rd JD 444K, A/C, JRB Coupler, Spool Aux, Tier III Engine, Ride Control, #262773..$79,000 Tires, Air Seat, GP Bucket, #262551......................$139,500 #291319 ......................$165,000

Page 12 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees OFF ROAD HAULERS

COMPACTORS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR . .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000 work ready . . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever & P/S trans, tailgate, work ready . . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a towremote . . . . . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx type, (4) MH lights, excellent . . . . . . . . . .From $5,200 (8) Sheepsfoot, 48" and 60", double drum & single 7,000 hrs, good condition . . . . . . . . . . . . . . .$147,500 drum, tow type . . . . . . . . . . . . . . . . . . .$4,000 - $6,500 BACKHOES Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, HYDRAULIC EXCAVATORS

Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700

P/S trans, working everyday on jobsites . . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, std stick, 24" bkt . . . . . . . . . . . . . . . . . . . . . . .$24,500

HMR, work ready . . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . .

Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 HMR, work ready . . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, Komatsu PC220LC-8 Longreach,

2011,

Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . .

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . . . . . . . . . . . . . .$4,000 Ea.

NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Dozer Boom/Stick 60’ reach, 3,500 HMR . . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,500 MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads,

Grapple Buckets in Stock

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500 Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

-Call For Your Needs FORKS

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . . .$229,500 Prices Are Negotiable - At Your Inspection TRUCKS & TRAILERS

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . . . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 13

#93259 | 2012 KOMATSU D51PXI-24, 915 RADIO | 1684 HOURS ............$184,500

#93349 | 2006 DEERE 270D, 12,270 HOURS | AUX HYD | QC ......$35,500

#93324 | 2014 KOMATSU PC360LC-10, #93284 | 2020 KOMATSU PC45MR-5, QC | AUX HYD | 9,015 HOURS ........$94,500 1055 HOURS | THUMB | QC ............$57,500

#93926 | 2002 KOMATSU PC228USLC-3, 12,486 HOURS ................................$39,500

#93287 | 2017 PC88MR-10, 2985 HOURS | THUMB | COUPLERS ......................$59,500

#93328 | 2019 KOMATSU PC210LC-11, #93361 | 2008 DEERE 544K, QC | BUCKET | 350 HOURS | HYD | QC | HYD THUMB.......... FORKS..............................................$67,500 ......................................................$209,500

#83456 | 2019 KOMATSU PC240LC-11, #52386 | 2019 KOMATSU PC170LC-11, 1600 HOURS..................................$169,500 1250 HOURS..................................$129,500

#52080 | 2016 KOMATSU D155AXI-8, #93309 | 2020 TAKEUCHI TB260, 4981 HOURS..................................$299,500 HYD THUMB | QC | 893 HOURS ......$69,500

#93189 | 2017 KOMATSU PC490LC-11, 7,393 HOURS ................................$169,500

#3690 | 2018 BOMAG BW191ADO-5, #93312 | 1982 CAT 950B, 163 HOURS......................................$79,500 6,328 HOURS ..................................$37,500

#93314 | 2013 VOLVO EC340, 7678 HOURS | AUX | QC..................$54,500

Page 14 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ohio Forestry Assoc. Holds 66th Annual Paul Bunyan Show

T

he Paul Bunyan Show is one of the oldest and largest forest industry trade shows in the country, promoting Ohio’s forest products industry. The 66th annual show was held Oct. 4, 5 and 6 at the Guernsey County Fairgrounds in Cambridge, Ohio.

Organized by the Ohio Forestry Association, the Paul Bunyan event showcases the latest products and technologies, along with the most current information regarding research and services geared toward the forestry industry in Ohio. Activities at the event included educational seminars, as well as equipment demonstrations and competitions. A portable sawmill competition and chipper and grinder demonstrations were conducted throughout the course of the event.

More than 170 exhibitors were on hand with displays of the latest equipment, products and services geared towards the forest industry. The event drew thousands of attendees from Ohio and surrounding states.

The Ohio Forestry Association is an inde-

pendent, not-for-profit trade organization serving the management of Ohio’s forest resources, as well as forest related industries and enterprises within the state.

This year’s sponsors included Bad Dog Tools, Bandit Industries, Bryan Equipment Sales, Buckeye Power Sales, Columbus Equipment Company, Doll Lumber Company, Farm Credit Mid-America, Husqvarna, ICR, Koppers, LaRoche Tree Service, Maverick Environmental Equipment, Murphy Tractor Equipment Co., Ohio Forestry Association, Pixelle Specialty Solutions, Precision Husky Corporation, Rudd, Scioto Land Company, Speyside Bourbon Stave Mill and Superior Hardwoods of Ohio.

Next year’s show is scheduled for Oct. 3 to 8.

For more information, visit thepaulbunyanshow.com.  CEG (All photographs in this article are Copyright 2024 Construction Equipment Guide. All Rights Reserved.) see OFA page 52

Exact Crane showed its newly added product line, Jekko cranes, at the Paul Bunyan Show. (L-R) are Nick Lee of Exact Crane; John Queseda of Jekko Crane; Becca Kroslak of Exact Crane; Zach Walker of Exact Crane; Colt Vacek of Jekko Crane; and Jeff Swan of Exact Crane.

(L-R): Olivia Thomas, Tristan Kinnison and Ian Forte of the American Forest Foundation talk to Paul Bunyan attendees about the Family Forest Carbon Program.

The Great Oaks Milford Ohio Vocational School of Heavy Equipment checks out this Cat 320 excavator. (L-R) are Hunter Thompson, Jake Noah, Ashton Grundy, Tyler Pugh, Leland Grundy and instructor Kyle Kenny.

(L-R): Bright Star Auctions’ Janice Miller, Daniel Stolzfus and Mike Tuscano spoke with attendees about their forestry auctions and services.

(L-R): Sean Woods, Nathan Monroe, Chrystal Clemons, Nicole Rinderle and Rodney Stephens, all of Newman Tractor; Jordan McClain of Mongo Attachments; and Jacob Holtzclaw of Newman Tractor are pictured with this SANY SY50U compact excavator with Mongo attachments.

Ditch Witch Mid States promotes its new Hyundai line, including this Hyundai HX 35 compact hydraulic excavator. (L-R) are Mike McDaniel, Tom Barnett, Matt Di Iorio, Brian Hodges, Tania Di Iorio, Chase Walter and Sam Swartz.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 15

Contact Rollie Aspenson at 608-220-1723 rollieaspenson@ brookstractor.com

See our entire used inventory at www.brookstractor.com Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Sparta • Plover (Stevens Point) • Mt. Pleasant (Racine) 2020 JOHN DEERE 350G LC

2023 WACKER NEUSON G25

2022 MERLO ROTO 50.35

2024 ATLAS COPCO XAS400-200

Warranty Included

Warranty Included

Stk #U814341, Cab/AC, 13'1" Arm, Aux. Hyds., Wide Pad, Coupler, 48" Bucket, 3626 Hrs ........................................$189,000

Stk #WN30419A, 2 Hrs, 25 HP Kohler Diesel, Single Axle, Ball Hitch ......$27,000

Stk #X220425F, 11,000# Capacity, 111' Lift Height, Forks, CS750 Wood Cracker Head WARRANTY, 31 Hrs ................$489,000

Stk #XAS400AB, 2 Hrs, Deere Diesel, 410 CFM, Trailer Mounted, Pintle Hitch ............ ..................................................$72,000

2011 JOHN DEERE 310SJ

2018 BOBCAT S595

2014 JOHN DEERE 410K

2013 CASE SR250

Stk #U195974, ROPS, 4x4, Pilots, Extendahoe, Aux. Hyds, 18" Bucket, 5354 Hrs ................................................$33,000

Stk #C00177, Cab/AC, EH Controls, 2 Speed, Power QT, Bucket, 1469 Hrs ........$38,500

Stk #C98966, 6104 Hrs, Cab/AC, 2WD, Extendahoe, RC, Aux. Hyd. Bucket, Breaker, Compactor ................................$35,000

Stk #C00132, Cab/AC, EH Controls, Ride Control, Power QT, 2 Speed, Bucket................ ................................................$27,000

2021 JOHN DEERE 331G

2019 JOHN DEERE 310SL HL

2015 JOHN DEERE 160G LC

2016 JOHN DEERE 300GLC

Stk #C99535, 2542 Hrs, Cab/AC, Ride Control, Power QT, Wide Track, Bucket WARRANTY ..............................$49,000

2013 HITACHI ZX470

Stk #C00224, Cab/AC, Long Arm, Wide Pads, Stk #C98881-1, 4233 Hrs, Cab/AC, Long Stk #U353120, Cab/AC, 4x4, Extendahoe, Pilots, Au. Hydraulics, 18" Bucket .................. Coupler, 36" Bucket, 7381 Hrs....$59,000 Arm, 32" Pads, Aux. Hyd., Coupler, Bucket...... ..............................................$139,000 ................................................$57,000

2023 ETNYRE MRG40TD3

2020 JOHN DEERE 650K

2022 JOHN DEERE 325G Warranty Included

Stk #C99433, Cab/AC, Wide Pads, 12'10" Arm, Bucket, 8222 Hrs ..............$87,000

Stk #Q33375, NEW 9' Width, 31' Platform Length, Full Width Mech. Folding Gooseneck, 40 Ton in any 16'........................$89,000

Stk #C00226-1, 3489 Hrs, Cab/AC, LGP, 24" Pads, 124" PAT Blade ..........$97,000

Stk # C99691, Cab/AC, 2 Speed, Wide Tracks, Power QT, Bucket WARRANTY, 294 Hrs ..........................................$65,000

We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.

Page 16 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Manufacturing Express Stops at Wacker Neuson Facility

T

Megan Tanel, president of Association of Equipment Manufacturers, addresses the employees of Wacker Neuson America.

he Association of Equipment Manufacturers’ (AEM) Manufacturing Express paid a visit to Wacker Neuson America Corporation in Menomonee Falls, Wis., on Oct. 15. AEM has been touring the country since July 1 to “tell the story of the U.S. equipment manufacturing industry and celebrate the 2.3 million men and women who help build, power and feed the world,” according to an AEM press release.

“We appreciate AEM for organizing the ‘Made in America’ tour because it’s important for us to showcase what we do here for the industry,” said Gert Reichetseder, president and CEO of Wacker Neuson America Corporation. “We’re very proud to be here in Wisconsin. We have been in the U.S. for Wisconsin’s Lt. Gov. Sara Rodriguez almost 70 years, and our company globally spoke during AEM’s stop at Wacker Neuson America’s manufacturing facili- celebrated 175 years last year. We are proud to design and build products here for the U.S. ty in Menomonee Falls, Wis.

market and that’s why we’re happy to host this event here today.”

Those helping celebrate included Reichetseder; Wisconsin’s Lt. Gov. Sara Rodriguez; Megan Tanel, president of Association of Equipment Manufacturers; Joe Miller, vice president of sales and marketing of Wacker Neuson; and Jim Elliott, CFO of Wacker Neuson.

“It’s a good thing to showcase the men and women who are building America, and as the slogan says, we are proud to celebrate ‘I Make America,’” said Reichetseder.

Each stop featured AEM’s interactive Manufacturing Challenge, designed to test players’ knowledge of the latest technology, innovation, processes and more related to American manufacturing. Also, giveaways, food and entertainment were provided. see WACKER page 80

AEM photo

Wacker Neuson displayed some of its product line, including this ET 42 mini-excavator.

The Wacker Neuson EZ36 mini-excavator was on display during the AEM Manufacturing Express stop at Wacker Neuson.

AEM photo

The Wacker Neuson logo is placed on the AEM bus.

(L-R) are Gert Reichetseder, president and CEO of Wacker Neuson America; Wisconsin Lt. Gov. Sara Rodriguez; Joe Miller, vice president of sales and marketing, Wacker Neuson; Jim Elliott, CFO Wacker Neuson; and Megan Tanel, president of the Association of Equipment Manufacturers, with the Wacker Neuson logo on the AEM bus.

Gert Reichetseder, president and CEO of Wacker Neuson America Corporation, welcomes everyone to the Wacker Neuson America headquarters in Menomonee Falls, Wis.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 17

Purpose Built www.liebherr.com

Material handling machines

Liebherr USA Co. • Construction Equipment Division • 4800 Chestnut Avenue • Newport News, VA 23607 • Phone +1 757 240 4250 Construction.USA@liebherr.com • www.facebook.com/LiebherrConstruction • www.liebherr.us/dealers-emt • www.liebherr.com

Page 18 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Fabick Cat Welcomes 175 Guests to Its Fall Customer

F

abick Cat welcomed 175 guests to its Fall Customer Appreciation and Demo Day at its Springfield, Mo., branch, located at 2222 E Kearney St., on Oct. 4, 2024.

With the newest equipment from Caterpillar on display, customers were given the opportunity to test drive the new 265 and 255 compact track loaders, excavators, wheel loaders as well as a variety of other Cat machines. Lunch also was provided, courtesy of the Fabick Cat team.

For more information, visit fabickcat.com.  CEG (All photographs in this article are Copyright 2024 Construction Equipment Guide, except where noted. All Rights Reserved.)

A Fabick Cat service truck hoisted the American flag at the company’s demo day in Springfield, Mo.

Rusty Kessinger (L) and Rob Muilenberg, both of Rob Muilenberg Excavating, took a photo with the new Cat 255 compact track loader.

This Cat 315 mini-excavator sat ready to show its capabilities in the demonstration area.

Fabick Cat photo

Kyle Law (C) of Fabick Cat shows the new Cat 255 compact track loader with a BA118C broom attachment to Brad Glessner (L) and Cory Stafford, both of Emery Sapp & Sons.

(L-R) are Mark Hanson, senior vice president of product support of Fabick Cat; James Williams, owner of Williams Construction Co., Springfield, Mo.; and Todd Stanley, chief operating officer of Fabick Cat.

Fabick Cat welcomed 175 guests to its Fall Customer Appreciation and Demo Day at its Springfield, Mo., branch.

(L-R): Amiel White of Fabick Teledyne Construction gives a demonstration of this Cat 255 tracked skid steer with Trimble Earthworks software and a GP124 grader blade attachment to Mike Childress and Gary Hammock, both of the city of St. Robert.

(L-R): Kelli Fabick, general manager, Fabick Rents; Jenny Black, office manager of western region; and Jill Burgard, vice president of marketing, welcome guests to the demo day in Springfield, Mo.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 19

Appreciation, Demo Day at Facility in Springfield, Mo.

Don Sartor of Rich Kramer Construction was at the Fabick Cat demo day in Springfield, Mo., looking at this Cat 302.7 compact excavator.

Visitors to Fabick Cat’s Springfield, Mo., demo day had a chance to see a demonstration of this Cat D3 dozer.

Will Brooks (L) of Brooks Gas, heard the specs on this Cat 279D3 tracked skid steer from Ryan Tate, territory manager of Fabick Cat.

Micah Liming of Liming Excavation, Springfield, Mo., was looking over this Cat 953 crawler dozer while visiting the Fabick Cat demo day.

(L-R): Damon Buehler, Jason Jackson and Michael Singer, all of Kenny Singer Construction, learn about these Cat excavators from Mike Cantrell, territory manager of Fabick Cat.

(L-R): Dave Burns of Fabick Cat showed these Cat D1 dozers to Stacy and Louis Yoakum of Yoakum & Sons Excavating and Dump Services.

(L-R) are Tray McDowell, Levi Dishman, Avery Thornton, Zach McCann and Mike Swims, all of Gillespie Excavating, with a Cat 255 compact track loader.

A display of Cat CTLs showed the various attachments available that make these machines so versatile.

(L-R) are Deborah Rainey, Dean Rainey and John Rainey of Dean’s Excavating LLC with a Cat 305 mini-excavator.

Page 20 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Find a dealer near you at MorookaAmericas.com

WST’s Ryan Stumph Wins John Deere Technician Award West Side Tractor photo

West Side Tractor Sales announced that Ryan Stumph has been awarded the Territory Champion of the John Deere Technicians of the Year Award.

He is one of 59 John Deere technicians being recognized across all John Deere construction and Ag/turf dealerships in the United States.

Since joining West Side Tractor in 2017, Stumph has consistently demonstrated exceptional technical expertise, dedication to customer service and a passion for his work in the field, setting a high standard in the industry.

Stumph holds certifications in more than 20 John Deere products and serves as a key field technician, providing vital support to customers across the region. He participates in ongoing product training – even taking the lead on creating the curriculum and delivering a 1-day training session to his peers – and is always willing to learn something new. His commitment to ensuring equipment uptime and rapid problem resolution has earned him a stellar reputation among customers.

“We couldn’t be more thrilled for

Ryan to receive this recognition,” said Steve Deller, vice president of product support of West Side Tractor.

“His technical expertise, combined with his dedication to building lasting relationships with customers, is truly outstanding. Ryan embodies the work ethic and values we strive for at West Side Tractor, and this award is a testament to his hard work.”

Stumph’s approach to customer service goes beyond just fixing problems. His dedication to preventing equipment downtime and providing thorough inspections has earned him the trust of his customers.

“I do whatever I can to ensure the customer is taken care of and production is not lost. I often work late or on weekends to keep our customers’ operations running smoothly,” said Stumph.

His meticulous attention to detail and problem-solving abilities have been key to his success, according to the company.

John Deere customers frequently commend Stumph for his exceptional service, noting his reliability, work ethic and communication.

“Ryan is always a joy to be around and goes above and beyond with any task. He is meticulous and ensures we understand every step of the process, minimizing our downtime,” said one long-term customer.

Another customer said, “Ryan always makes sure we understand what he's doing to solve our issues as well as making sure our ‘down time’ is low because we know we’re being taken care of with good workmanship and honesty. He is loyal to West Side Tractor as well as the customers.

Ryan gets a 5-star rating from us.”

Beyond his technical achievements, Stumph also is an active member of his community, volunteering with Tree Lafayette to plant and maintain trees within the city. His contributions reflect the same dedication and care he brings to his work.

“I enjoy the problem-solving aspect of being a technician,” Stumph said. “It’s rewarding to figure out the root cause of an issue and get our customers back up and running. It’s also great to see how much they appreciate the effort, even when the job starts on a tough note.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 21

THE BEST B P PA PARTS AR A RTS TS ALL IN N ONE PLACE PLA CE E

THE ALL-NEW & INTUITIVVE

CASE B SERIES

The all-new CASE B Series skid steers and compact track t loaders feature an all-new 8-inch LCD operator screen with ba ackup camera; completely updated and simplified operator controls; even greater cab comfort;; and while the machine looks the same on the e outside, we’ve o what you and re-engineered its critical inner workings to stand up to your jobsites face every day.

Stop by VLP or visit CaseCE.com/BSERIES S for a closer look.

MISSOURI KANSAS CITY 4100 Gardner Avenue Kansas City, City MO 64120 Phone: 816-241-9290

JOPLIN 5430 S. Highway 43 Joplin Joplin, MO 64804 Phone: 417-781-8222

KANSAS WICHITA 3250 N. Hydraulic Street Wichita, KS 67219 Phone: 316-838-3346

TOPEKA 1305 SW 42nd Street Topeka, KS 66609 To Phone: 785-267-4345

GARDEN CITY 2203 W. Jones Avenue Garden City, KS 67846 Phone: 620-275-1996 vlpco.com

©2023 VLP Company. All rights reserved. CASE is a trademark registered in the United Staates and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.

Page 22 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kirby-Smith Machinery has one of the largest and most diverse rental fleets in the region.

• Large Fleet of current model equipment • Rentals available by the week, month or longer • Low weekly and monthly rates • Specialized Equipment & Support – Paving, Material Handling, Demolition and more!

www.kirby-smith.com Kansas City 913.850.6300

St. Louis 314.729.0125

Follow us on

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 23

MID COUNTRY MACHINERY 1-800-206-5936 BONDURANT 515-410-9900

FORT DODGE 515-574-2302

SIOUX CITY 712-943-4470

WATERLOO 319-234-8710

AUTHORIZED DEALERS

BACKHOES 2005 CAT 430D LOADER BACKHOE, 6165 Hrs ..............................$37,000 2000 JOHN DEERE 310SE BACKHOE, 1263 Hrs ............................$42,500 2019 CATERPILLAR 440 TRACTOR LOADER BACKHOE, 920 Hrs .......... ..........................................................................................................$115,000 2021 CATERPILLAR 420 BACKHOE, 674 Hrs ..............................$125,000

DOZERS 2017 CAT 963K TRACK LOADER, 4873 Hrs ..........................................Call 2007 JOHN DEERE 655C DOZER, 7160 Hrs....................................$45,000 2022 KOMATSU D39PX-24 DOZER, 1100 Hrs................................$139,000 2022 KOMATSU D39PX-24 DOZER, 431 Hrs ................................$159,000 2022 KOMATSU D39PX-24 DOZER, 420 Hrs ................................$159,000 2023 KOMATSU D39PX-24 DOZER, 539 Hrs ................................$159,000 2019 CAT D5K2LGP DOZER, 1241 Hrs ..........................................$197,000 2021 CAT D6 LGP DOZER, 3829 Hrs..............................................$325,000 2017 KOMATSU D37-24PX, EROPS, 2463 Hrs ................................$69,000 2023 KOMATSU D39PX-24 DOZER, 395 Hrs ................................$159,000 2020 JOHN DEERE 650K LGP DOZER, 1299 Hrs ........................$132,000 2020 JOHN DEERE 650K LGP DOZER, 1759 Hrs ........................$132,000 2021 JOHN DEERE 700L LGP DOZER, 864 Hrs............................$203,000 2022 CAT D3 LGP DOZER, 2258 Hrs..............................................$137,500 2019 JOHN DEERE 450K DOZER, 848 Hrs ....................................$112,000 2019 JOHN DEERE 550K DOZER, 1739 Hrs..................................$129,000

EXCAVATORS 2019 LINKBELT 145X4 EXCAVATOR, 3756 Hrs ..............................$89,000 2023 SANY SY215C EXCAVATOR, 1 Hrs ......................................$160,000 2021 SANY SY265C LONG REACH EXCAVATOR, 956 Hrs ..........$165,000 2021 SANY SY265C LONG REACH EXCAVATOR, 1328 Hrs ........$155,000 2022 SANY SY265C LONG REACH EXCAVATOR, 777 Hrs ..........$185,000 2019 KOBELCO SK140SRLC-5 EXCAVATOR, 1741 Hrs ................$89,000 2022 LINKBELT 145X4DZ EXCAVATOR WITH BLADE, 881 Hrs ..$145,000 2023 LINKBELT 145X4DZ EXCAVATOR, 100 Hrs ..................................Call 2019 LINKBELT 145X4DZ EXCAVATOR WITH BLADE, 3139 Hrs ..$92,000 2023 LINKBELT 145X4 LC EXCAVATOR, 201 Hrs ................................Call 2021 LINKBELT 145X4DZ, 1810 Hrs ......................................................Call 2021 SANY SY135C EXCAVATOR, 446 Hrs............................................Call 2021 KOBELCO SK140SRLC-7 EXCAVATOR, 2032 Hrs ..............$115,000 2023 LINKBELT 145X4 EXCAVATOR WITH BLADE, 666 Hrs ..............Call 2021 SANY SY155U EXCAVATOR, 913 Hrs ..................................$125,000 2022 SANY SY155U EXCAVATOR, 1183 Hrs..................................$120,000 2021 SANY SY135C THUMB EXCAVATOR, 617 Hrs......................$110,000 2019 KOBELCO SK140SRLC-5 EXCAVATOR, 1752 Hrs ................$92,000 2023 LINKBELT 2023 160X4EXCAVATOR, 179 Hrs ......................$153,500 2023 LINKBELT 160X4EXCAVATOR, 300 Hrs ................................$160,000 2019 LINKBELT 160X4EX EXCAVATOR, 1719 Hrs ........................$115,000 2023 KOBELCO SK170LC-11 EXCAVATOR, 598 Hrs ....................$138,500 2023 KOBELCO SK170LC-11 EXCAVATOR, 224 Hrs ....................$155,000 2023 KOBELCO SK 210LC-11 EXCAVATOR, 141 Hrs ..........................Call 2022 SANY SY225C EXCAVATOR, 1604 Hrs..........................................Call 2023 SANY SY225C EXCAVATOR, 628 Hrs............................................Call 2023 SANY SY225C EXCAVATOR, 447 Hrs............................................Call 2022 SANY SY215C THUMB EXCAVATOR, 550 Hrs ....................$135,000 2023 HITACHI ZX210LC-6 EXCAVATOR, 110 Hrs ..................................Call 2023 HITACHI ZX210LC-6 HP EXCAVATOR, 675 Hrs ............................Call

2021 HITACHI ZX210LC-6N EXCAVATOR 3D TOPCON, 1198 Hrs$169,000 2021 HITACHI ZX210LC-6N EXCAVATOR, 3746 Hrs ....................$119,000 2023 LINK-BELT 210X4 HD EXCAVATOR, 329 Hrs................................Call 2021 SANY SY215C EXCAVATOR, 792 Hrs....................................$119,000 2022 SANY SY215C EXCAVATOR, 380 Hrs....................................$119,000 2022 SANY SY215C EXCAVATOR, 515 Hrs ..................................$127,000 2023 SANY SY225C EXCAVATOR, 350 Hrs............................................Call 2023 SANY SY215C THUMB EXCAVATOR, 309 Hrs..............................Call 2019 LINKBELT 210X4 EXCAVATOR, 1644 Hrs ............................$129,000 2020 HITACHI ZX225USLC-6 EXCAVATOR, 1363 Hrs ..................$142,000 2022 SANY SY225C EXCAVATOR THUMB, 616 Hrs ....................$139,000 2022 SANY SY225C EXCAVATOR, 568 Hrs ..................................$132,000 2023 SANY SY225C EXCAVATOR, 122 Hrs............................................Call 2023 SANY SY225C THUMB EXCAVATOR, 259 Hrs..............................Call 2023 SANY SY225C EXCAVATOR, 24 Hrs..............................................Call 2023 LINKBELT 245X4DZ EXCAVATOR, 559 Hrs ..................................Call 2023 KOBELCO SK270SRLC-7 EXCAVATOR, 111 Hrs..........................Call 2019 KOBELCO SK260LC-10 EXCAVATOR, 2725 Hrs ..................$119,000 2023 KOBELCO SK350LC-11 EXCAVATOR, 729 Hrs ....................$229,000 2019 JOHN DEERE 350GF EXCAVATOR, 2810 Hrs ......................$159,000 2023 LINK-BELT 80X3 EXCAVATOR, 88 Hrs ..........................................Call 2022 LINK-BELT 2022 80X3 EXCAVATOR, 822 Hrs ........................$99,000 2022 LINK-BELT 75X3 EXCAVATOR, 553 Hrs ........................................Call 2022 SANY SY80U EXCAVATOR, 405 Hrs ......................................$97,000 2020 LINKBELT 80X3 EXCAVATOR, 2044 Hrs ................................$74,500 2023 YANMAR VIO80-1A, 244 Hrs ....................................................$99,000 2023 KOBELCO SK35SR-7 MINI EXCAVATOR, 156 Hrs ......................,Call 2022 SANY SY80U EXCAVATOR, 288 Hrs ......................................$89,000 2023 YANMAR VIO35-6A MINI EXCAVATOR, 0 Hrs ........................$63,500 2023 YANMAR VIO35-6A MINI EXCAVATOR, 3 Hrs ........................$63,500 2022 SANY SY26U MINI EXCAVATOR, 182 Hrs ..............................$32,000 2023 YANMAR SV40 MINI EXCAVATOR, 33 Hrs ..............................$69,000 2023 YANMAR SV40 MINI EXCAVATOR, 10 Hrs ..............................$65,000 2023 KOBELCO SK35SR-6E MINI EXCAVATOR, 258 Hrs ..............$45,000 2022 SANY SY26U EXCAVATOR, 100 Hrs ......................................$29,000 2023 YANMAR VIO35-6A MINI EXCAVATOR, 0 Hrs ........................$63,500 2023 YANMAR VIO35-6A MINI EXCAVATOR, 34 Hrs ......................$63,500 2022 SANY SY26U EXCAVATOR, 100 Hrs ......................................$29,000 2022 SANY SY26U EXCAVATOR, 98 Hrs ........................................$29,000 2023 YANMAR SV40 MINI EXCAVATOR, 313 Hrs ..................................Call 2024 HITACHI ZX50U-5N MINI EXCAVATOR, 40 Hrs ............................Call 2024 HITACHI ZX60USB-5N MINI EXCAVATOR, 3 Hrs ..........................Call 2024 HITACHI ZX60USB-5N MINI EXCAVATOR, 5 Hrs ..........................Call 2024 HITACHI ZX60USB-5N MINI EXCAVATOR, 194 Hrs ......................Call 2024 HITACHI ZX35U-5N MINI EXCAVATOR, 7 Hrs ..............................Call 2024 HITACHI ZX50U-5N MINI EXCAVATOR, 1 Hrs ..............................Call 2022 SANY SY50U EXCAVATOR, 121 Hrs ......................................$54,000 2023 SANY SY60C EXCAVATOR, 5 Hrs..................................................Call 2023 2023 SANY SY60C EXCAVATOR, 323 Hrs ....................................Call 2023 SANY SY50U EXCAVATOR, 33 Hrs................................................Call

2020 TORO DINGO TX1000 MINI TRACK LOADER, 0 Hrs ............$29,500 2022 TORO DINGO TX1300, 57 Hrs ........................................................Call 2023 MANITOU 1650 TRACKED SKID LOADER, 220 Hrs ..............$64,500 2023 GEHL RT215 TRACK LOADER, 107 Hrs ................................$77,500 2024 MANITOU 2150 RT TRACK SKID LOADER, 75 Hrs ..............$73,500 2021 MANITOU 2550RT TRACKED SKID STEER, 850 Hrs ............$45,000 2022 TAKEUCHI TL12V2 CRHR TRACK SKID LOADER, 618 Hrs $79,000 2024 TAKEUCHI TL6R SKID LOADER, 27 Hrs ................................$51,000 2020 CATERPILLAR 289D3 SKID LOADER, 798 Hrs ......................$89,000 2023 CASE SV280B SKID LOADER, 454 Hrs ..................................$49,000 2023 JOHN DEERE 333G COMPACT TRACK LOADER, 506 Hrs ..$86,500 2020 GEHL V270 SKID LOADER 74" BUCKET BOCE, 274 Hrs ....$59,000 2024 TAKEUCHI TL6R SKID LOADER, 9 Hrs ..................................$51,000 2023 JOHN DEERE 325G SKID LOADER, 714 Hrs ........................$66,500 2023 JOHN DEERE 325G SKID LOADER, 599 Hrs ........................$66,500 2023 JOHN DEERE 325G SKID LOADER, 393 Hrs ........................$66,500 2023 JOHN DEERE 325G COMPACT TRACK LOADER, 442 Hrs ..$66,500 2019 KUBOTA SVL75-2 SKID LOADER, 1920 Hrs ..........................$39,000 2020 KUBOTA SVL75-2 SKID LOADER, 200 Hrs ............................$47,000 2019 CASE TV370 SKID LOADER, 2225 Hrs ..................................$44,000 2023 JOHN DEERE 333G SKID LOADER, 628 Hrs ........................$79,000 2023 JOHN DEERE 333G COMPACT TRACK LOADER, 379 Hrs ..$89,000 2023 JOHN DEERE 333G COMPACT TRACK LOADER, 518 Hrs ..$87,500 2020 JOHN DEERE 333G COMPACT TRACK LOADER, 1195 Hrs $59,500 2020 KUBOTA SVL95-2SHFC COMPACT SKID LOADER, 569 Hrs$65,000 2022 TAKEUCHI TL12R2 CR TRACK SKID LOADER, 1030 Hrs ....$67,000 2022 TAKEUCHI TL12R2 CR TRACK SKID LOADER, 978 Hrs ......$65,000 2022 TAKEUCHI TL12V2 CRHR TRACK SKID LOADER, 611 Hrs..$70,000 2022 TAKEUCHI TL12R2 CR TRACK SKID LOADER, 879 Hrs ......$69,000 2022 TAKEUCHI TL12V2-CRHR TRACK SKID LOADER, 421 Hrs $85,000

WHEEL LOADERS

2019 JOHN DEERE 544L WHEEL LOADER, 2260 Hrs..................$149,000 2015 VOLVO L90H WHEEL LOADER, 16914 Hrs ..................................Call 2022 HITACHI ZW100-6 WHEEL LOADER, 464 Hrs ......................$109,000 2022 HITACHI ZW80-5B WHEEL LOADER, 197 Hrs........................$79,000 2022 HITACHI ZW80-5B WHEEL LOADER, 109 Hrs........................$79,000 2023 HITACHI ZW80-5B WHEEL LOADER, 208 Hrs........................$83,000 2023 HITACHI ZW80-5B WHEEL LOADER, 189 Hrs........................$83,000 2023 HITACHI ZW80-5B WHEEL LOADER, 16 Hrs..........................$83,000 2023 HITACHI ZW80-5B WHEEL LOADER, 39 Hrs..........................$83,000 2023 HITACHI ZW100-6 WHEEL LOADER, 261 Hrs ..............................Call 2022 HITACHI ZW80-5B WHEEL LOADER, 205 Hrs ..............................Call 2022 HITACHI ZW80-5B WHEEL LOADER, 167 Hrs........................$79,000 2022 HITACHI ZW100-6 WHEEL LOADER, 627 Hrs ........................$99,000 2023 HITACHI ZW120-6 WHEEL LOADER, 37 Hrs ................................Call 2019 CATERPILLAR 926M WHEEL LOADER, 4579 Hrs ..............$135,000 2019 JOHN DEERE 544L WHEEL LOADER, 2344 Hrs..................$149,000 2023 SANY SW305K WHEEL LOADER, 136 Hrs ..................................Call 2014 HITACHI ZW220-5 WHEEL LOADER, 7744 Hrs ......................$79,000 2022 HITACHI ZW180-6 WHEEL LOADER, 2014 Hrs ....................$135,000 2022 HITACHI ZW180-6 HIGH LIFT WHEEL LOADER, 2178 Hrs $155,000 2018 TAKEUCHI TS80V-2 SKID LOADER, 0 Hrs....................................Call 2022 HITACHI ZW180-6 WHEEL LOADER, 4043 Hrs ....................$125,000 2022 TORO DINGO TX1000 WIDE TRACK 42" SMOOTH BUCKET, 163 Hrs 2023 KOMATSU WA270-8 WHEEL LOADER, 1423 Hrs ................$172,000 ............................................................................................................$45,000 2023 KOMATSU WA270-8 WHEEL LOADER, 679 Hrs ..................$172,000 2022 TORO DINGO TX1000 WIDE TRACK 42" SMOOTH BUCKET, 92 Hrs 2023 KOMATSU WA270-8 WHEEL LOADER, 133 Hrs ..................$183,000 ............................................................................................................$45,000 2023 HITACHI ZW220-6 WHEEL LOADER, 454 Hrs ..............................Call 2023 TORO TX1000 DINGO WIDE TRACK, 47 Hrs..........................$46,000 2021 HITACHI ZW220-6 WHEEL LOADER, 546 Hrs ......................$190,000

LOADERS

Page 24 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Louisville Welcomes Landscaping Industry to 2024 Equip Expo

T

he 2024 Equip Expo was held at the Kentucky Exposition Center in Louisville, Ky., Oct. 15 to 18. Equip Expo is one of the largest events for professionals in the landscaping, hardscaping and outdoor power equipment industries.

The annual trade show attracts tens of thousands of attendees, including landscape contractors, dealers and construction professionals. It showcases outdoor power equipment, landscaping tools, demonstrations, networking opportunities and educational sessions. With a massive exhibit area and outdoor demo area, vendors can showcase new equipment and products.

The Equip Expo also offers a series of workshops and seminars to help attendees improve their business. The welcome receptions and cocktail mixers offer a variety of networking opportunities. The Equip Exposition is held annually in Louisville, Ky., and is dedicated to growing and connecting landscapers, hardscapers, manufacturers and dealers.

Next year’s show will be held Oct. 21 to 24.

For more information, visit equipexposition.com.  CEG (All photographs in this article are Copyright 2024 Construction Equipment Guide. All Rights Reserved.)

Kubota’s Jimmy Jones (L) and TJ Meals were there to demonstrate the company’s SVL75-3 compact track loader.

(L-R): Michael Oliver, John Dotto and Jeff Jilling, all of Wacker Neuson, were ready to show attendees the ST50 compact track loader.

see EQUIP page 88

Arielle Windom, PR specialist, Flint Group, Fargo, N.D., with Dave Gordon, executive director of IEDA Group, Chicago Ill., met up at Equip Expo.

Stephan Odum (L), national marketing manager of Takeuchi, Pendergrass, Ga., with Brandon Johnson, brand ambassador.

Johnson spoke with attendees about his experiences with the Takeuchi product line.

The Ditch Witch Mid-States team of Tania Di Iorio, Matt Di Iorio, Sam Swartz and Elliott Carter were at Equip Expo to show what the SK1750 skid steer with TriTrax could do.

Representing Hiniker of Mankato, Minn., are Mike Zimprich (L), parts, service and warranty manager, and Naomi Bird, marketing manager, with the company’s popular Torsion Trip 8.5-ft. V Plow 9500 series.

John Deere’s Doug Laufenberg, manager of sales and marketing, compact construction equipment, brought the 330 P skid steer to show attendees of Equip Expo 2024 in Louisville, Ky.

Caterpillar’s Trevor Chase (L), senior product specialist, and Morgan Timiney, product specialist, brought the new Cat 285 XE CTL.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 25

2021 BERGMANN C815S $165,000

2022 BERGMANN C815S $165,000

2019 BELL B20E

$165,000

2020 BELL B20E

$175,000

2016 BELL B25E

$125,000

2019 BELL B25E

$150,000

2019 BELL B25E

$125,000

2017 BELL B30E

$149,000

2016 BELL B40D

$135,000

2017 BELL B40E

$149,000

2018 BELL B40E

$135,000

2018 BELL B40E

$139,000

2016 CAT D3K2LGP

$79,000

2019 JOHN DEERE 650K XLT ID# EQ11566 $75,000

ID# EQ11686

ID# EQ11689

ID# EQ12086

2013 MOROOKA MST 1500VD ID# EQ1245 $85,000

ID# EQ9865

ID# EQ1111

ID# EQ5849

2014 MOROOKA MST 3000VD ID# EQ11693 $49,000

ID# EQ6162

ID# EQ1057

ID# EQ5884

ID# EQ10270

ID# EQ2103

ID# EQ1354

ID# EQ12085

Page 26 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Zach Pritchett Matt Blosser

John Toste

Bobby Saint

zachpritchett@ macallister.com

johntoste@ macallister.com

bobbysaint@ macallister.com

mattblosser@ macallister.com

www.macallistermachineryused.com Indianapolis, IN (317) 860-3311

We specialize in Cat Used Parts and Attachments Huge attachment inventory. Over 300 attachments in stock. We Buy, Sell, and Trade.

Inventory changes daily, please call to discuss your needs and how we can help.

308E CR: Dismantling now- 1,000 hour machine, HYD thumb, mechanical quick coupler.

Also have HYD couplers available

CB534D xw: Dismantling now- All parts available

345C: Dismantling 2- Most parts available

Cat IT coupler buckets: New surplus in many different sizes

DOZER BLADES IN STOCK D10R/T, D9R/T, D8R/T, D7R, D7R LGP, D7E, D6R LGP, D6K, D5G, D5C.

QUICK COUPLER FORKS IN STOCK 420 D/E/F, 950-972 Fusion, 953, 972 HPL, Cat Telehandler

DOZER RIPPERS IN STOCK D10R/T SS ripper, D11R/T SS ripper, D7R MS ripper, D6N MS ripper, D5K MS ripper, D5C/D4C/D3C ripper.

WHEEL LOADER BUCKETS FROM 914-992 Many sizes and styles available.

Pin-on and Quick Coupler.

EXCAVATOR ATTACHMENTS IN STOCK Quick Couplers for Most Models from Mini - 374D/E 336 Excavator - 30”, 36”, 42”, 54”, 60” all in stock.

315 Excavator - Most Sizes from 24” - 60” ditch cleaner 312/314 Excavator - 24”, 30”, 36”, 60” ditch cleaner 320/321/312 Excavator - 24”, 30”, 42”, 54”, 80” ditch cleaner 345/349 Excavator - 36”, 48”, 54”, 60”, 72”

M/H SERIES GRADER RIPPERS IN STOCK Also front pushblock counterweights.

RECENTLY PARTED MACHINES INCLUDE D4c, TH83, 988F, 769C, TH460B, TH360B, 242B, 320C, 345C, 420E IT, 836G, 345CMH, M325DMH, D6T

980 GP Bucket: Cat 980 loader buckets available, many GP buckets on hand. Sizes form 7-10 yards.

988k Rock Spade: 988k Rock Spade, also new surplus 988g/h GP bucket, 988F rock spade, Low Hour 990 rock spade.

972 GP Bucket: 972 GP bucket, Several available, new and used, also fit 966 loaders.

Excavator Sticks and Booms: Excavator stick, booms, and cylinders in stock.

Light Material Buckets: Light material buckets, Pin-on and Quick coupler available.

Wheel Loader Couplers: Wheel and track loader couplers available, fusion and HPL style.

Truck Beds and Tailgates: Tailgates for all articulated Dumps available. Multiple 725 beds on hand.

Backhoe and Small Loader Buckets: Quick coupler and pin on buckets for 420 backhoe, 914 and 918 Loader buckets.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 27

MADE FOR R

AMERICA A SERVICE THAT’S T

LOCAL SCHEDULE E A DEMO

TODAY

WITH A LOCAL DEALER R

sanyamerica.com m

Award Winning

SW405K

Page 28 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

S A L E S • S E R V I C E • R E N TA L S • PA RT S

VISIT ONE OF OUR FOUR TRI-STATE BOBCAT SHOWROOMS! Phone: (952) 894-0894 1200 Highway 13 East Burnsville, MN 55337

Phone: (651) 407-3727 Phone: (715) 531-0801 71 Minnesota Avenue 588 Outpost Circle Little Canada, MN 55117 Hudson, WI 54016

Phone: (715) 557-6010 2018 US Highway 8 St. Croix, WI 54024

WWW.TRISTATEBOBCAT.COM

S EEK ING N EW DE ALER S TO STR E NGTH E N OU R M I DWEST PR ES E NCE Looking for a sound business opportu unity to enhance you ur offering? Consider ourr durable crawler carrierss, backed by our commitment m to quality.

More informa ma atio on at a : sales.na@pr p inoth.co om

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 29

UNITS START AT $3950 drockgrizzly.com • (715) 889-1175

RIPPER, 4”deck bars/RIPPER HD-5” deck bars, Our largest model designed for rip rap, shot rock, And large material. Bar spaces available 2”-30”

TR6 model, Our smallest model-designed for sub Compact tractors and other light duty Equipment.

2” minus fixed bar

MR10 Model, 1-2 yd loaders. Adjustable bar and Cleaner option available. Removable cleaner for more sorting options

HD Model, up to 5 yd loader. Heavy Duty grizzly bars standard. Cleaner option available, Removable cleaner for more sorting options

LR8 model, skid steers-mini excavators, Adjustable bar and cleaner option available, AB set up at 2”-adjustable in 1” increments

Business News...

Komatsu Plans to Acquire Mining Software Developer To expand its artificial intelligence (AI) capabilities and help customers optimize their mining operations, Komatsu announced its intent to acquire Octodots Analytics, a Chile-based digital solutions provider.

The announcement comes as the company debuts its new Modular ecosystem, a bold vision for the future of mine site optimization and data sharing, at MINExpo 2024 in Las Vegas.

Building upon Komatsu’s DISPATCH fleet management system, the Modular ecosystem is a set of interconnected platforms and products designed to simplify existing workflows.

“Our ecosystem is designed to empower customers to optimize decision making at the machine, mine site and enterprise levels,” said Jason Fletcher, SVP Mining Technology Solutions, Komatsu.

“Octodots’ expertise and solutions map perfectly to what we’ve created and we are excited about the opportunities to incorporate their products and capabilities into our offering.”

Since 2017, Octodots Analytics has been developing and commercializing advanced digital solutions for industries including mining, construction, forestry, transportation and more. The company’s multidisciplinary team has particular expertise in three key areas: mining engineering, transportation and data science.

The Modular ecosystem will provide mining companies the ability to connect data used across their operations, including data from Komatsu products as well as third-party technologies and equipment from other manufacturers.

For more information, visit www.komatsu.com and octodots.ai/en/. 

Page 30 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Scale Models for Sale Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Vogele Super 1900-5i Tracked Paver, 1:50 scale $175

Case 580SR Backhoe/Loader, 1:50 scale $160

Bucyrus Erie 22B Cable Shovel, 1:50 scale ..............................................$225 Bucyrus Erie 22B Cable Backhoe, 1:50 scale ............................................$225 Bucyrus Erie 22B Dragline, 1:50 scale ......................................................$275 Allis Chalmers HD-3 Dozer, w/Backhoe, 1:16 scale ................................$200 Caterpillar D6H Track-Type Tractor, 1:50 ..................................................$90 Bantam Lattice Crane on White WC22 Carrier ........................................$160 Hamm 7i Pad Foot Compactor, 1:50 scale ................................................$125 Caterpillar 941 Traxcavator, 1:24 scale ....................................................$125 Case 1488 Excavator, 1:50 scale ..............................................................$115 Caterpillar 325L Excavator, 1:50 scale......................................................$110 Caterpillar 325B L Excavator, 1:50 scale ..................................................$110 Hamm HC-119 Soil Compactor, 1:50 scale ..............................................$115 Caterpillar 988F Wheel Loader, 1:50 scale ..............................................$110 Caterpillar D9N Track-Type Tractor w/black tracks, 1:50 scale................$110 Caterpillar D9N Track-Type Tractor w/yellow tracks, 1:50 scale..............$110 Caterpillar D7C Track-Type Tractor, 1:50 scale ........................................$110 Roadtec RP190 Paver, 1:50 scale..............................................................$110 Case 850B Angle/Tilt Dozer, 1:35 scale ....................................................$100 Case 580F Backhoe/Loader, 1:35 scale ....................................................$100 Doosan DL420A Wheel Loader, 1:40 scale ..............................................$100 Hitachi EX200 Excavator, 1:40 scale ........................................................$100 Case DH4B Trencher, 1:35 scale ................................................................$90 Caterpillar D11R Track-Type Tractor, 1:50 scale ........................................$90 John Deere 470G LC Excavator, 1:50 scale ................................................$90 Caterpillar AP-1000 Asphalt Paver, 1:50 scale ........................................$110 Caterpillar M318 Wheel Excavator, 1:50 scale ........................................$100 Allis Chalmers Forty-Five Motor Grader, 1:50 scale ................................$100 Caterpillar 416 Backhoe/Loader, 1:50 scale ..............................................$75 Caterpillar 936 Wheel Loader, 1:50 scale ..................................................$75 Shipping and Handling Included

Bmckeon Collectibles 470 Maryland Drive Fort Washington, PA 19034

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 scale $85

Allis Chalmers TS300 CableOperated Scraper, 1:50 scale $100

Kawasaki Wheel Loader, 1:48 scale............................................................$80 Cedarapids 451 Grayhound Track/wheel Paver, 1:50 scale........................$80 Caterpillar 428 Silver Backhoe/Loader, 1:50 scale ....................................$75 Caterpillar 225 Crane w/clamshell Bucket, 1:50 scale ..............................$75 Caterpillar 12G Motor Grader, 1:50 scale ..................................................$75 Case 1102 Single Drum Roller, 1:35 scale ................................................$65 Gehl 4610 Skid Steer Loader, 1:50 scale ....................................................$75 Caterpillar CB534 Double Drum Roller, 1:50 scale ..................................$60 Caterpillar D4E Track-Type Tractor, new color, 1:50 scale ........................$75 Caterpillar D4E Track-Type Tractor, old color, 1:50 scale..........................$75 Caterpillar 225 Excavator, 1:70 scale..........................................................$50 Caterpillar 773-B Off-Highway Truck, 1:70 scale ........................................$45 Isuzu V275 Dump Truck, 1:55 scale ............................................................$40 JCB 801 Mini-Excavator, 1:35 scale ............................................................$40 John Deere 772BH Motor Grader, 1:64 scale..............................................$35 Caterpillar 226 Skid Steer Loader w/Grapple attachment, 1:32 scale ......$35 Caterpillar 631D Tilt Trailer Dump, 1:70 scale ..........................................$35 Case 9030B Excavator, 1:50 scale ..............................................................$65 Case 1845B Skid Steer Loader, 1:35 scale ................................................$65 Bobcat S185 Skid Steer Loader, 1:25 scale ................................................$60 Bobcat 610 Skid Steer Loader, 1:25 scale ..................................................$60 Bobcat 743 Skid Steer Loader, 1:25 scale ..................................................$60 Original Melroe Bobcat M-200 Skid Steer Loader, 1:25 scale ..................$60 Caterpillar 438C Backhoe/Loader, 1:50 scale ............................................$65 Massey Ferguson 516 Skid Steer Loader, 1:32 scale ................................$60 Gehl 5635 Skid Steer Loader,1:25 scale ....................................................$45 New Holland L-555 Skid Steer Loader,1:25 scale ......................................$45 Mustang 940 Skid Steer Loader,1:25 scale ................................................$45 WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 31

3 3 2

A

PLEASE CONTACT YOUR LOCAL DEALER:

MICHIGAN Grand Rapids: 616-538-2400 Lansing: 517-321-8000 New Hudson: 248-437-8121 Richmond: 586-727-7502 Saginaw: 989-777-0090 Traverse City: 231-267-5060

WISCONSIN Butler (Milwaukee): 262-781-3770 DeForest (Madison): 608-846-9600 DePere (Green Bay): 920-336-3601 Eau Claire: 715-835-6133

ILLINOIS Goodfield: 309-965-2502 Peru: 815-224-4711 Rock Island: 309-787-6108 Springfield: 217-528-4347 Tolono: 217-485-6755 IOWA Cedar Rapids: 319-365-0515 Dubuque: 563-588-1950 MISSOURI Columbia: 573-657-2154 Palmyra: 573-769-2274

6778 99:9;<779: 998 =>=<6?88

@

ILLINOIS Mitchell: 618-931-1034, Mt. Vernon: 618-244-6800 INDIANA Evansville: 812-473-0484 KENTUCKY Bowling Green: 270-842-3400, Lexington: 859-788-3950 London: 606-862-8447, Louisville: 502-253-3721 Owensboro: 270-684-2339, Paducah: 270-554-1131 MISSOURI Cape Girardeau: 573-334-0563, Cuba: 573-885-0500 Fenton: 636-349-0200, Foristell: 636-463-2500

OHIO Brunswick: 330-220-4999, Cambridge: 740-439-2747 Canton: 330-477-9304, Cincinnati: 513-772-3232 Columbus: 614-876-1141, Jackson: 740-688-4100 Lima: 419-221-3666, Painesville: 440-639-0700 Poland (Youngstown): 330-629-6299 Rossford: 567-352-7001 Vandalia (Dayton): 937-898-4198

KANSAS Kansas City: 913-371-3822 NEBRASKA Grand Island: 308-384-2620 Lincoln: 402-325-0447 Norfolk: 402-316-4640 Omaha: 402-331-9200 MISSOURI ! " # $ !""%&' %%( )* + , - .

Springfield: 417-732-5505

ILLINOIS Lisle: 630-355-7150 Rockdale: 815-730-9011 Rockford: 815-961-3160 South Holland: 708-331-6362 Wauconda: 847-526-7700 INDIANA Bloomington: 812-333-9677 Fort Wayne: 260-482-8576 Indianapolis: 317-544-3411 Lafayette: 765-447-6933 South Bend: 574-232-1461 Terre Haute: 812-645-7160

IOWA Des Moines: 515-282-0404, Sioux City: 712-252-0538 MICHIGAN Negaunee: 906-475-6488 MINNESOTA Duluth: 218-727-8611, Rochester: 507-701-0199 Savage: 952-895-9595, Virginia: 218-741-9011

/ 0 / 1 2 3 04 1 1 5 5 5 5 5 ! 5 "

Page 32 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Minn. Fall Maintenance Expo Features Equipment Demos

T

Nuss Truck & Equipment had the crew from Burnsville, Minn., showing off the new electric Volvo DD25 roller. It is a zero-exhaust emission solution for small scale compaction projects including street repairs and patching, parking lots, driveways and municipalities. (L-R) are Adam Edwards, regional sales manager; Andy Heinecke, equipment sales; and Jim Freitag, regional sales manager.

Diamond Mowers was represented by (L-R) Dacotah Buum, sales operations lead; Paul Schreurs, regional sales manager; Spencer Wrightsman, sales operations specialist; and Tessa Miller, director of marketing. They brought the Diamond Drum Mulcher DC Pro, for loaders up to 75 hp. This mulcher is ideal for heavy-duty mulching and brush clearing applications.

Rick Klehr, city of Savage, Minn., maintenance supervisor, tests out a Cat 938 loader from Ziegler Cat of Bloomington, Minn.

Dave Forsmark, international sales manager of Douglas Dynamics in Shakopee, Minn., at the Aspen Equipment of Bloomington, Minn., booth and its popular Western Plow line.

he Minnesota Fall Maintenance Expo was held Oct. 2 to 3 at the St. Cloud Public Works Facility in St. Cloud, Minn. This year 2,321 were in attendance and were eligible to receive .5 credits/day towards the Roads Scholar Program Maintenance Certificate.

The two-day event is sponsored by the Minnesota Department of Transportation (MnDOT), Minnesota Local Technical Assistance Program (LTAP), Minnesota Street Superintendents Association and American Public Works Association/Minnesota Chapter. It is open to all city, county and state maintenance employees and supervisors, plus transportation and research implementation personnel.

While addressing fall and winter transportation maintenance issues, vendors were on hand to show the latest equipment and technologies at the indoor and outdoor display areas. Speakers also present the latest industry information.

The annual “Snowplow Roadeo” is always popular, allowing competitors to compete on a closed course. The top two drivers in this years’ Snowplow Roadeo are Chad Dunkley of Mille Lacs County, Minn., and Kevin Davis of Sherburne County, Minn. The top two excavator operators are Chad Dunkley of Mille Lacs County, Minn., and Jesse Backstrom of Cook County Highway. Dunkley and Davis will be invited to compete in the Western Snow and Ice Show in Loveland, Colo. next September.

For more information, visit mnfallexpo.com.  CEG (All photographs in this article are Copyright 2024 Construction Equipment Guide. All Rights Reserved.) see MINNESOTA page 97

Nathan Uphus, sales manager of Felling Trailers Inc. in Sauk Centre, Minn., with Felling’s massive XF-110 3 HDG. The X-Force HDG is one of the industry’s most user-friendly hydraulic detachable gooseneck trailers on the market.

Chad Weins, owner of Crysteel Truck Equipment of Lake Crystal, Minn., is celebrating 50 years in business.

Farm-Rite Equipment of St. Cloud, Minn., had its extensive product lines on hand for attendees to review.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 33

BURRIS EQUIPMENT www.burrisequipment.com 2216 N. Greenbay Rd. Waukegan, IL 60087 847-336-1205 Ingleside, IL 815-363-4100 Joliet, IL 815-464-6650

CENTRAL POWER SYSTEMS & SERVICES www.cpower.com 9200 Liberty Drive Liberty, MO 64068 816-781-8070 Wichita, KS 316-943-1231 Woodward, OK 580-256-6014 Salina, KS 785-825-8291 Colby, KS 785-462-8211 Springfield, MO 417-865-0505 Joplin, MO 417-726-5373 Riverside, MO 816-415-6787 Wichita, KS 316-789-7370 Yukon, OK 405-324-2330 St. Peters, MO 314-427-4911 Liberty, MO 816-415-6700 Tulsa, OK 918-984-6565

Decades in the Dirt For 40 years, Wacker Neuson has engineered, designed and built excavators around the needs of our customers. And because every construction site is different, we offer variety and versatility for the job at hand. From rugged and reliable tracked conventional tail machines to minimal tail swing, wheeled, and zero emission models, you’ll find the right configuration, lifting capacity and breakout force to handle the toughest challenges. What’s more, Wacker Neuson excavators are durable, powerful and easy to operate.

See how Wacker Neuson builds solutions for you.

Contact your local dealer today!

www.wackerneuson.com

Page 34 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

0FOR 36 MO.

GEHL WORKS FOR YOU

%

$2500 TO CASHBACK

OR UP

ON ALL NEW SKID STEERS & CTLS*

WORKS LIKE YOU

Scan to Learn More!

8840 Byron Commerce SW Byron Center, MI 49315 616-878-7450

56195 Pontiac Trail New Hudson, MI 48165 248-356-5200

G 3283 S Dort Hwy. Burton, MI 48529 810-744-4840

613 E Stevenson Road Ottawa, IL 61350 815-313-2070

1061 Stepke Court Traverse City, MI 49685 231-943-3700

Detroit, MI 48208 313-394-1811

Bloomington, IL 61407 309-585-3800

Gary, IN 46406 219-238-6875

5831 State Avenue Kansas City, KS 66102 913-222-5092

DEALER & INFO GOES5000HERE 5105 NAME Loraine Street 1035 Wylie Drive Industrial Hwy

www.altaequipment.com

*Offer subject to change. Available on select GEHL skid/track loader models. See dealer for details.

toughseats.com

(855) 579-0538 TOUGH MEETS QUALITY

Direct Bolt In Seats

• Mounting adapters included with seat • Seats ship within one business day • Ship Nationwide

Backhoe Seats • Dozer Seats • Excavator Seats • Off-Highway Truck Seats Skidsteer Seats • Scraper Seats • Wheel Loader Seats • Tractor Seats sales@toughseats.com •

28501 Wilmot Rd • Bldg 1 Unit 10 • Trevor, WI 53179

www.ste-equipment.com

6330 W 60 Highway Brookline, MO 65619 417-222-7269

™

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 35

Hayden Machinery, Inc. 4358 West Livery Lane Springfield, MO 65802 West Plains, MO Villa Ridge, MO 417-831-0000 MyHayden.com

Taylor Construction Equipment 312 Peterson Drive Elizabethtown, KY 42701 270-257-4220 920 Wing Avenue, Ste B Owensboro, KY 42303 812-250-5001 taylorconstructionequipment.com

Oak Hill Equipment, LLC 20245 Ewing Road Ewing, IL 62836 618-944-4490 oakhillequipmentllc.com

Page 36 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Husqvarna Optimizes Its Range of Large Floor Grinders for Performance

All of the best features from the company's most popular machines are now under one optimized platform for superior grinding performance.

From top to bottom, Husqvarna’s range of robust and powerful large floor grinders are packed with features from the consolidation of three product lines, designed for maximum comfort, efficiency and reduced maintenance costs.

Fort Dodge, IA 515-576-3184

Great Bend, KS 620-792-2748

Sioux City, IA 712-252-2753

Humboldt, KS 620-473-7020

Waterloo, IA 319-235-7085

Olathe, KS 913-298-7373

Brunswick, OH 330-220-4999

Topeka, KS 785-233-0556

Cambridge, OH 740-439-2747

Ulysses, KS 620-356-1071

Canton, OH 330-477-9304

Dodge City, KS 620-227-3139

Cincinnati, OH 513-772-3232

Gering, NE 308-436-2177

Columbus, OH 614-876-1141

Omaha, NE 402-894-1899

Jackson, OH 740-688-4100

Lincoln, NE 402-467-1300

Lima, OH 419-221-3666

Grand Island, NE 308-381-0741

Painesville, OH 440-639-0700

North Platte, NE 308-534-7020

Poland (Youngstown), OH 330-629-6299

Kansas City, MO 816-483-5000

Rossford, OH 567-352-7001

Springfield, MO 417-863-1000

Vandalia (Dayton), OH 937-898-4198

www.westsidetractorsales.com 3300 Ogden Ave Lisle, IL 60532 630-355-7150 South Holland, IL 708-331-6362

EZChange

Rockdale, IL 815-730-9011 Wauconda, IL 847-526-7700

Most Efficient Models PG 8 DR | PG 8 XR | PG 8 D | PG 5 The most efficient planetary floor grinders are designed for all types of flooring applications such as texturing, preparing, grinding and polishing. These models achieve consistent scratch patterns and smooth, even surfaces with minimum effort.

The main features include: • New remote control (PG 8 DR & PG 8 XR) • Dual Drive Technology (*Not available on PG 5 model) • EZChange Airflow • Integrated weights with three preset positions * All-Around Models PG 8 S | PG 6 S The all around models are versatile, three-disc planetary floor grinders suitable for most applications — from coating removal to grinding and polishing on concrete and natural stone.

Park City, KS 316-942-1457

Des Moines, IA 515-263-0055

Sealed to Last Each model has a hermetically sealed grinding head and electrical cabinet design, preventing dust or water from intruding and damaging components. This feature provides enhanced reliability and low maintenance.

Time Saving Tool Change Every model features EZChange — a hassle-free system for changing diamond tooling. In addition, some models feature EZChange Airflow.

The EZChange tool holder with Airflow technology creates an increased and controlled airflow around the tools.

This cools the tools and directs dust towards the extractor.

murphytractor.com

Rockford, IL 815-961-3160

EZChange Airflow

For more information, www.husqvarnaconstruction.com.  (All photos courtesy of Husqvarna.)

visit

Bloomington, IN 812-333-9677 Indianapolis, IN 317-544-3411 South Bend, IN 574-232-1461 Lafayette, IN 765-447-6933 Fort Waye, IN 260-482-8576 Terre Haute, IN 812-645-7160

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 37

SIZABLE TASKS SEEM SMALL FROM HERE. The 316GR and 318G Skid Steers and 317G Compact Track Loader are impressively tough because real-world customers like you helped design them. With your input, we pushed the limits of durability, engine power, and fuel capacity in some pretty big ways. And with fewer grease zerks and extended oil-change intervals compared to earlier models, servicing is even simpler. Including the radial-lift 316GR, these G-Series small frames can take down the biggest jobs — and your operating costs — all at the same time. To learn more, call or visit us today.

www.brookstractor.com Madison (Sun Prairie), WI 608-837-5141 Milwaukee, WI 414-462-9790 Green Bay (De Pere), WI 920-336-5711 La Crosse (West Salem), WI 608-786-2644 Stevens Point (Plover), WI 715-254-2777 Racine (Mt. Pleasant), WI 262-898-6700 Sparta, WI 608-351-2101

www.lec1.com

www.martinequipment.com

mccoycf.com

Ashland, KY 606-327-1709

Goodfield, IL 309-965-2502

Tolono, IL 217-485-6755

Bemidji, MN 218-759-1996

Escanaba, MI 906-789-9054

Cape Girardeau, MO 573-334-0563

Knoxville, TN 865-546-3207

Pikeville, KY 606-432-0321

Peru, IL 815-224-4711

Cedar Rapids, IA 319-365-0515

Duluth, MN 218-722-7456

Marquette, MI 906-789-7689

Paducah, KY 270-554-1131

Chattanooga, TN 423-855-0633

Marietta, OH 740-373-5255

Rock Island, IL 309-787-6108

Dubuque, IA 563-588-1950

Grand Rapids, MN 218-326-9427

Fenton, MO 636-349-0200

Cuba, MO 573-885-0500

Nashville, TN 615-501-8600

Cowen, WV 304-226-3299

Springfield, IL 217-528-4347

Columbia, MO 573-657-2154

Ashland, WI 715-682-5522

Foristell, MO 636-463-2500

Owensboro, KY 270-684-2339

Bowling Green, KY 270-842-3400

Palmyra, MO 573-769-2274

Chippewa Falls, WI 715-834-2924

Mt. Vernon, IL 618-244-6800

Evansville, IN 812-473-0484

Louisville, KY 502-253-3721

Merrill, WI 715-536-0633

Mitchell, IL 618-931-1034

Kingsport, TN 423-349-5001

Lexington, KY 859-788-3950

Beaver, WV 304-255-1525 Elkins, WV 304-636-6421 Cross Lane, WV 304-204-1818

London, KY 606-862-8447

Page 38 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

COUNT ON TORO GENUINE PARTS

DO ITT ALLANDDTHEN SOME.

DEPENDABLE. VERSAT V ATILE. POWERFU UL. The Dingo® TX 1000 0 TURBO has upgraded d torque for improved productivity and more than 35 attachments to conquer any task.

www.altaequipment.com 844-GO2-ALTA 18405 115th Avenue Orland Park, IL 60467 420 Nolen Drive South Elgin, IL 60177 26354 N US Hwy 12 Wauconda, IL 60084 480 Blaine St. Gary, IN 46406 613 E Stevenson Road Ottawa, IL 61350 1035 Wylie Drive Bloomington, IL 61705

www.lubyequipment.com 2300 Cassens Drive Fenton, MO 63026 636-343-9970 199 Airport Road Cape Girardeau, MO 63702 573-334-9937 2999 Mexico Road O’Fallon, MO 63366 636-332-9970 2625 North 24th Street Quincy, IL 62305 217-222-5454

TORO.COM O /DEALER

TORO® DINGO® | TX 1000 TURBO

©2024 The Toro Company. All Rights Reserved.

4375 Camp Butler Road Springfield, IL 62707 217-744-2233 921 1st Street Fairmont City, IL 62201 618-397-9971

www.tristatebobcat.com

www.lanoequip.com

1200 Highway 13 East Burnsville, MN 55337 952-894-0894

6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266

588 Outpost Circle Hudson, WI 54016 715-531-0801 71 Minnesota Avenue Little Canada, MN 55117 651-407-3727 2018 US Hwy 8 St. Croix, WI 54016 715-557-6010

23580 Highway 55 Loretto, MN 55357 763-479-8200 888-479-4342 3021 West 133rd Street Shakopee, MN 55379 952-445-6310 877-753-6100

www.bobcat-ent.com 9605 Princeton Glendale Road Hamilton, OH 45011 513-874-8945

13117 Middletown Industrial Blvd.

Louisville, KY 40223 502-245-1911

225 Hughes Blvd Mount Orab, OH 45154 937-444-3865

1309 Cahill Drive Lexington, KY 40504 859-254-3936

3666 Lacon Road Hilliard, OH 43026 614-876-1116

51 Harvest Drive Elizabethtown, KY 42701 270-506-4530

182 Humphries Drive Reynoldsburg, OH 43068 614-863-1300

13350 Service Rd. Walton, KY 41094 859-449-7272

3000 Dillon School Drive Zanesville, OH 43701 740-313-0087

Page 40 • October 26, 2024 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

John Deere Premieres New Portfolio Featuring Next Phase P-Tier Dozers Improving its product portfolio of large dozer offerings, John Deere introduces the 950 P-Tier and 1050 P-Tier dozers as part of its performance tiering strategy.

Previously in market as the 950K and 1050K, these robust machines are the next generation of models to join the increasing lineup of John Deere P-Tier dozers.

The new 1050 P-Tier dozer boasts an increase in engine power and a redesigned hood and front-end design. In addition, both the 950 P-Tier and 1050 P-Tier offer enhanced visibility and improved safety features, positioning them as an ideal solution for operators aiming to boost productivity and protection on the job site, according to the manufacturer.

“John Deere is dedicated to providing its customers

Taking safety to the next level, the Operator Presence System ensures that an operator is present in the seat of the cab, with the seat belt fastened, before the park break can be released. This ensures a critical layer of safety, preventing accidental movement or operation before the operator is buckled in. The P-Tier system also integrates the park brake switch into the system status monitor, eliminating the need for traditional park lock levers. This integration not only streamlines the operation process but also enhances the overall safety mechanism of the machine.

Enhancing operator comfort and functionality, both models now feature a premium heated and ventilated seat option, which is air-suspended with adjustment controls for optimal ergonomics. The seat design remains at a 15degree angle to provide optimal comfort when operating the rear ripper. The updated cab features new ergonomic controls, neutral counter rotate, and an integrated forward neutral reverse switch. This ergonomic focus ensures operators can work for extended periods with reduced physical strain, helping to enhance productivity on the job site.

Remaining the largest PowerAngle-Tilt (PAT) dozer in the market, the 950 P-Tier dozer features SmartGrade, John Deere factory integrated mastless 3D grade control. This machine has the power for heavy cuts and the finesse to finish grade.

Receiving a significant increase in operational advantages upon its entry to the P-Tier portfolio, the newly upgraded 1050 P-Tier dozer boasts a range of features and John Deere photo enhancements that boost overall The 950 P-Tier and 1050 P-Tier models boast advanced visibility and safety functionality and efficiency. One features as part of the transition to P-tier. notable upgrade is the tag link and blade design that brings the blade 10 with large dozer options that fit the needs of every job site, in. closer to the frame. and the new P-Tier machines offer the durability and reliAlong with the tag link, inverted tilt and pitch cylinders ability our customers demand from machines of this size were added. The inverted tilt and pitch cylinders, lowered class”, said Matt Costello, product marketing manager, hood and larger front window help improve operator visiJohn Deere Construction & Forestry. bility to the blade. The repositioning of the 168-in. blade, “The 950 P-Tier and 1050 P-Tier dozer models were due to the updated tag link design, paired with doubleupdated with the customer in mind, helping them increase bogie undercarriage provides operators with a more balefficiency, visibility and gradeability in even the most anced machine and a clearer view of the blade corners, demanding conditions.” which is a critical factor for precision work.

The strategic design enhancements of the new P-Tier In terms of power, the 1050 P-Tier dozer features a dozer models aim to improve operator safety, visibility on revamped JD14 (13.6 L) engine which replaces the 13.5 L the job and uptime. Now equipped with standard LEDs, engine in the 1050K. The JD14 enhances durability, operator efficiency has been significantly improved during reduces fuel consumption and uses a single canister in the night-time or low-light operations. Also helping to aftertreatment system to meet emission regulations withimprove uptime, the cold weather hydraulic lines are spe- out the need for a diesel particulate filter. cially tailored for cold climate operations. These hoses, Lastly, on the 1050 P-Tier, the new cooling system has which replace the standard option, are rated for lower tem- been redesigned with a single plane layout, positioning peratures, ensuring smooth hydraulic function in harsh coolers side-by-side instead of stacked. This new design winter and weather conditions. not only improves cooling efficiency but also simplifies The cab of the 950 P-Tier and 1050 P-Tier can be tilted access for cleaning. for easy serviceability access under the cab.

For more information, visit www.deere.com. 

martinequipment.com Goodfield, IL 309-965-2502 Peru, IL 815-224-4711 Rock Island, IL 309-787-6108 Springfield, IL 217-528-4347 Tolono, IL 217-485-6755

Cedar Rapids, IA 319-365-0515 Dubuque, IA 563-588-1950 Columbia, MO 573-657-2154 Palmyra, MO 573-769-2274

murphytractor.com Park City, KS 316-942-1457 Great Bend, KS 620-792-2748 Humboldt, KS 620-473-7020 Olathe, KS 913-298-7373 Topeka, KS 785-233-0556 Ulysses, KS 620-356-1071 Dodge City, KS 620-227-3139 Gering, NE 308-436-2177 Omaha, NE 402-894-1899 Lincoln, NE 402-467-1300 Grand Island, NE 308-381-0741 North Platte, NE 308-534-7020 Kansas City, MO 816-483-5000 Springfield, MO 417-863-1000 Des Moines, IA 515-263-0055

Fort Dodge, IA 515-576-3184 Sioux City, IA 712-252-2753 Waterloo, IA 319-235-7085 Brunswick, OH 330-220-4999 Cambridge, OH 740-439-2747 Canton, OH 330-477-9304 Cincinnati, OH 513-772-3232 Columbus, OH 614-876-1141 Jackson, OH 740-688-4100 Lima, OH 419-221-3666 Painesville, OH 440-639-0700 Poland (Youngstown), OH 330-629-6299 Rossford, OH 567-352-7001 Vandalia (Dayton), OH 937-898-4198

www.aisequip.com Bridgeport, MI 989-777-0090 Grand Rapids, MI 616-538-2400 Lenox, MI 586-727-7502

New Hudson, MI 248-437-8121 Williamsburg, MI 231-267-5060

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 26, 2024 • Page 41

THE POWER OF CHOICE

JUST GOT BIGGER. Expect big things from the John Deere 850L Dozer. Larger and more powerful than the previous K-Series model, the 850L gives you 10% more horsepower and 23% more torque for mass earthmoving. And with state-of-the-art controls, the usual Deere arsenal of productionboosting hydrostatic advantages, Slope Control and fully integrated SmartGrade™ grade-control options, and the choice of a Power-Angle-Tilt (PAT) or Outside Dozer (OSD) blade, you can pick the level of precision and performance you need to step it up. Stop by or call us today.

www.lec1.com

Beaver, WV 304-255-1525 Cowen, WV 304-226-3299 Cross Lanes, WV 304-204-1818 Pleasant Valley, WV 304-534-5454 Norton, WV 304-636-6421 Marietta, OH 740-373-5255 Ashland, KY 606-327-1709 Pikeville, KY 606-432-0321

mccoycf.com Cuba, MO Marquette, MI Bemidji, MN 573-885-0500 906-789-7689 218-759-1996 Owensboro, KY Fenton, MO Duluth, MN 270-684-2339 636-349-0200 218-722-7456 Evansville, IN Foristell, MO Grand Rapids, MN 812-473-0484 636-463-2500 218-326-9427 Kingsport, TN Mitchell, IL Ashland, WI 423-349-5001 618-931-1034 715-682-5522 Knoxville, TN Mt. Vernon, IL Chippewa Falls, WI 865-546-3207 618-244-6800 715-834-2924 Cape Girardeau, MO Chattanooga, TN Merrill, WI 423-855-0633 573-334-0563 715-536-0633 Nashville, TN Paducah, KY Escanaba, MI 615-501-8600 270-554-1131 906-789-9054

Bowling Green, KY 270-842-3400 Louisville, KY 502-253-3721 Lexington, KY 859-788-3950 London, KY 606-862-8447

JohnDeere.com/Dozers

www.brookstractor.com Madison (Sun Prairie), WI 608-837-5141 Milwaukee, WI 414-462-9790 Green Bay (De Pere), WI 920-336-5711 La Crosse (West Salem), WI 608-786-2644 Stevens Point (Plover), WI 715-254-2777 Racine (Mt. Pleasant), WI 262-898-6700 Sparta,WI 608-351-2101

www.westsidetractorsales.com Lisle, IL 630-355-7150 Rockdale, IL 815-730-9011 Rockford, IL 815-961-3160 South Holland, IL 708-331-6362 Wauconda, IL 847-526-7700 Bloomington, IN 812-333-9677

Fort Wayne, IN 260-482-8576 Indianapolis, IN 317-544-3411 Lafayette, IN 765-447-6933 South Bend, IN 574-232-1461 Terre Haute, IN 812-645-7160

Page 42 • October 26, 2024 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

KOMATSU

CASE 650M LGP 650M LT 650M WT 750M LGP 750M WT 750M LT 850M LGP 850M WT 850M LT 1150M LGP 1150M WT 1150M LT 1650M LGP 1650M WT 1650M XLT 2050M LGP 2050M WT 2050M XLT

68 (50.6) 68 (50.6) 68 (50.6) 92 (69) 92 (69) 92 (69) 112 (84) 112 (84) 112 (84) 127.4 (95) 127.4 (95) 127.4 (95) 150 (112) 150 (112) 150 (112) 214 (160) 214 (160) 214 (160)

MODEL

ENGINE POWER HP (KW)

16,936 (7,682) 15,931 (7,226) 16,457 (7,464) 21,005 (9,527) 20,756 (9,414) 20,168 (9,148) 23,430 (10,627) 22,855 (10,366) 22,319 (10,124) 33,346 (15,125) 32,883 (14,915) 31,843 (14,443) 39,557 (17,940) 38,657 (17,531) 37,756 (17,123) 49,221 (22,326) 47,332 (21,469) 45,880 (20,810)

FPT F5C F5HFL463D*G003 FPT F5C F5HFL463D*G003 FPT F5C F5HFL463D*G003 FPT F5HFL413J*A002 FPT F5HFL413J*A002 FPT F5HFL413J*A002 FPT F4HFE413P*A008 FPT F4HFE413P*A008 FPT F4HFE413P*A008 FPT F4HFE613F*A002 FPT F4HFE613F*A002 FPT F4HFE613F*A002 FPT F4HFE6132 FPT F4HFE6132 FPT F4HFE6132 FPT F4HFE613J FPT F4HFE613J FPT F4HFE613J

WEIGHT LBS. (KG)

ENGINE TYPE

17,855 (8,098.9) 18,382 (8,337.9) 20,640 (9,362.1) 29,259 (13,271.7) 42,263 (19,170.2) 50,733 (23,012.1) 51,333 (23,284.3) 65,644 (29,775.6) 87,600 (39,734.7) 110,225 (49,988) 154,888 (70,256) 229,800 (104,236)

Cat C3.6 Cat C3.6 Cat C3.6 Cat C4.4 Cat C7.1 Cat C9.3B Cat C9.3B Cat C9.3B Cat C15 Cat C18 Cat C27 Cat C32

CATERPILLAR D1 D2 D3 D4 D5 D6 D6 XE D7 D8 D9 D10 D11 / D11 CD

MODEL

80 (59.7) 92 (68.6) 104 (77.6) 130 (96.9) 170 (126.8) 215 (160.3) 215 (160.3) 265 (197.6) 354 (264) 452 (337.1) 620 (462) 850 (634)

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

LIEBHERR 150 (110) 184 (135)

36,288 - 42,681 ( 16,460 - 19,360) 47,818 - 50,809 (21,690 - 23,047)

D 924 A7 D 934 EVO

130 (97) 168 (125) 214 (160) 254 (190) 349 (260) 416 (310) 757 (565)

29,321 - 34,833 (13,300 - 15,800) 38,581 - 45,856 (17,500 - 20,800) 46,738 - 56,218 (21,200 - 25,500) 57,100 - 69,446 ( 25,900 - 31,500) 78,044 - 94,799 ( 35,400 - 43,000) 101,909 - 119,462 (46,225 - 54,187) 142,743 - 161,354 (71,800 - 73,189)

D924 A7 D 934 A7 D 934 EVO D 936 A7 D 946 A7 D 9508 A7 D 9512 A7

Dozers PR 716 PR 726 PR 736 PR 746 PR 756 PR 766 PR 776

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

WH: Waste Handler

D37EX-24 D37PX-24 D39EX-24 D39EXi-24 D39PX-24 D39PXi-24 D51PX-24 D51EX-24 D51EXi-24 D51PXi-24 D61EX-24 D61EXi-24 D61PX-24 D61PXi-24 D65EX-18 D65WX-18 D65PX-18 D65EXi-18 D65PXi-18 D65EX-18 WH D65PX-18 WH D71EX-24 D71EXi-24 D71PX-24 D71PXi-24 D71PX-24 Wide D71PXi-24 Wide D85EX-18 D85PX-18 D85EXi-18 D85PXi-18 D85EX-18 WH D85PX-18 WH D155AX-8 D155PX-8 D155AXi-8 D155AX-8 WH D375A-8 D475A-8

89 (66) 89 (66) 105 (78) 105 (78) 105 (78) 105 (78) 131 (98) 131 (98) 131 (98) 131 (98) 168 (125) 168 (125) 168 (125) 168 (125) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 237 (177 ) 264 (197) 264 (197) 264 (197) 264 (197) 264 (197) 264 (197) 354 (264) 354 (264) 354 (264) 354 (264) 609 (455) 890 (664 )

19,842 (9,000) 20,503 (9,300) 21,891 (9,930) 22,068 (10,010) 22,817 (10,350) 22,950 (10,410) 31,438 (14,260) 30,821 (13,980) 30,380 (13,780) 31,438 (14,260) 40,830 (18,520) 41,094 (18,640) 42,902 (19,460) 43,167 (19,580) 46,892 (21,270) 50,618 (22,960) 50,331 (22,830) 46,892 (21,270) 50,331 (22,830) 50,259 (23,165) 53,136 (24,102) 49,824 (22,600) 50,045 (22,700) 50,927 (23,100) 51,147 (23,200) 52,690 (23,900) 52,911 (24,000) 67,615 (30,670) 64,600 (29,300) 68,350 (31,000) 65,460 (29,700) 70,718 (32,077) 69,860 (31,688) 89,300 (40,500) 92,820 (42,102) 90,610 (41,100) 94,421 (42,828) 163,340 (74,090) 254,200 (115,300)

Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA4D107E-7 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D170E-7 Komatsu SAA12V140E-7

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

230 (172) 230 (172) 230 (172) 230 (172) 230 (172) 173 (129)

45,660 (20,710) 45,705 (20,750) 45,990 (20,860) 46,035 (20,900) 47,530 (21,560) 43,030 (19,518)

Cummins B6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7 Cummins B6.7

DRESSTA

Loaders LR 626 LR 636

MODEL

TD-15M (Semi-U) TD-15M (Angle) TD-15M-LT (Semi-U) TD-15M-LT (Angle) TD-15M-WT (Semi-U) TD-16N

VISIT WWW.CONSTRUCTIONEQUIPMENTGUIDE.COM FOR COMPLETE CRAWLER DOZER AND LOADER LISTINGS.

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 26, 2024 • Page 43

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

115.3 (86) 146.1 (108.9)

24,286 (11,016) 32,037 (14,532)

DEVELON G2 DM03-LED00 Perkins 1204J

155 (116) 155 (116) 194 (145) 194 (145)

40,614 (18,422) 42,120 (19,104) 45,178 (20,492) 50,675 (22,985)

John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068

71 (53) 92 (69) 104 (78) 135 (101) 135 (101) 175 (131) 175 (131) 225 (168) 225 (168) 225 (168) 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 354 (264) 354 (264)

17,816–19,035 (8,081–8,634) 18,853–20,115 (8,552–9,124) 21,165–22,484 (9,600–10,198) 30,900–32,088 (14,016–14,555) 30,900–32,088 (14,016–14,555) 37,569–40,040 (17,041–18,162) 37,569–40,040 (17,041–18,162) 47,578–51,356 (21,581–23,295) 47,578–51,356 (21,581–23,295) 54,086–54,353 (24,533–24,654) 65,300–73,700 (29 606–33 431) 65,300–73,700 (29 606–33 431) 71,250–75,150 (32 325–34 100) 94,000–94,580 (42 640–42 900) 102,350–102,850 (46 430–46 650)

John Deere PowerTech EWX 4045 John Deere PowerTech PWS 4045 John Deere PowerTech PWS 4045 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PVS 6068 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere PowerTech PSS 6090 John Deere JD14 John Deere JD14

DEVELON DD100 DD130

JOHN DEERE

Loaders

655K 655K Waste Handler 755K 755K Waste Handler

Dozers 450 P-Tier 550 P-Tier 650 P-Tier 700L 700L SmartGrade 750L 750L SmartGrade 850L 850L SmartGrade 850L Waste Handler 950 P-Tier 950 P-Tier SmartGrade 950 P-Tier Waste Handler 1050 P-Tier 1050 P-Tier Waste Handler

Cat Medium Dozers Receive Technology Package Upgrades

Caterpillar photo

Now standard, Cat Assist with ARO ensures that every new Cat D4 to D7 dozer comes equipped with the suite of Assist features that can be easily upgraded to Cat Grade 3D.

Caterpillar announced two technology package upgrades for its medium dozer line.

Formerly ARO with Assist, Cat Assist with ARO (attachment ready option) suite of features will be included as a standard feature on Cat D4, D5, D6, D6 XE and D7 models, starting in early 2024. Additionally, a new Cat Grade with 3D Ready option provides more flexibility for customers upgrading to Cat Grade with 3D on D4, D5 and D6 dozer models.

Now standard, Cat Assist with ARO ensures that every new Cat D4 to D7 dozer comes equipped with the suite of Assist features that can be easily upgraded to Cat Grade 3D. These features include: • Stable Blade — Make finish dozing easier • Traction Control — Reduce track slip to minimize wear • Auto Carry — Maximizes blade loads • Blade Load Monitor — Operator coaching for productivity • Slope Assist — Holds blade angles with no GPS • Steer Assist — Automatically keeps dozing straight • ARO — Sensors (IMUs) on machine for GPS capability Cat Grade with 3D uses a GPS signal to automatically adjust blade lift and tilt movements, so operators can get to design faster, save time and reduce the cost of rework, labor and materials.

The new Cat Grade with 3D Ready option consists of all the hardware required for the 3D system and comes installed and tested from the factory. The option includes onboard sensors, GNSS antennas and receivers, and a 10-in. touchscreen display. This allows the 3D Ready hardware to be quickly updated to a complete Grade with 3D system with the purchase of necessary licenses through the Cat dealer.

For more information, visit www.cat.com. 

Page 44 • October 26, 2024 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Hyundai Adds Another Product Category With Introduction of HD100 Tracked Dozer HD Hyundai photo

Midland Engine www.midlandengine.com 622 Jefferson Ave. Midland, MI 48640 989-631-4608

The Hyundai HD100 dozer is a 10-ton-class machine with a standard blade capacity of 2.9-cu. yd. and a digging depth of 1 ft. 6 in.

Buck & Knobby Equipment Co. www.buckandknobby.com 6220 Sterns Rd. Ottawa Lake, MI 49267 MI 734-856-2811 OH 419-476-5293

CSTK

www.cstk.com 401 Shawnee Avenue Kansas City, KS 66105 913-371-0868

Diamond Equipment

www.diamondequipment.com 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273 800-388-6396

HD Hyundai Construction Equipment North America announced the expansion of its product line into crawler dozers with the availability of its first new dozer model, the 115 net hp (86 kW) Hyundai HD100.

The addition of dozers to the Hyundai product line broadens its line of earthmoving equipment, which already includes wheel loaders, hydraulic excavators, articulated dump trucks, skid steers and compact track loaders, as well as equipment designed for material handling in specialized applications.

“The new HD100 dozer will be a great addition to the equipment fleets of earthmoving contractors, forestry, waste handlers and other customers who already enjoy the benefits of using Hyundai wheel loaders and excavators,” said Mike Ross, senior VP, HD Hyundai Construction Equipment North America. “It’s further evidence of the Hyundai commitment to providing the right solution for a wide range of earthmoving and material-handling applications.”

David Spooner, product manager, HD Hyundai Construction Equipment North America, said, “This new Hyundai dozer delivers best-in-class power-to-weight ratio and the best visibility to the dozer blade. Our dealers and customers, especially in landscaping and forestry, have already expressed a lot of interest in this machine.

“Customers know that, when they buy a machine with the Hyundai name, they will get a full-featured machine with more standard features, as well as Hyundai’s industry-leading warranty and support from Hyundai’s expanding network of dealers.”

He said the Hyundai HD100 dozer is designed to be heavier and deliver more power and tractive ability than other dozers in its size class. The machine’s undercarriage system includes dual-flange rollers outside the chain of the track and single-flange rollers inside the chain of the track to help ensure the track stays on the undercarriage to reduce wear and provide greater operator comfort.

The Hyundai HD100 dozer is a 10-ton-class machine with a standard blade capacity of 2.9-cu. yd. and a digging depth of 1 ft. 6 in. The fuel-efficient 4-cylinder Hyundai G2 DM03 engine meets Tier IV Final emissions standards. Standard operating weight is 23,589 lb., and track length on the ground is 108 in. A hydrostatic transmission provides

smooth control of speed and torque while enhancing ease of operation.

Superior Visibility, Grading Precision Increase Productivity, Efficiency The Hyundai HD100 dozer offers superior visibility to the standard 6-way angle blade. Positioning the electronic cooling system at the back of the machine results in an unobstructed view of the blade.

Further adding to the excellent visibility to the working end of the dozer are the narrow front hood, placement of the inline pre-cleaner under the hood, minimized cab pillars and maximized glass areas including all-glass doors. A rearview camera, high-illumination LED lights and four premium wiper blades are all standard.

The standard 6-way variable-angle-pitch dozer blade — with a maximum angle of 25 degrees — delivers more precision when grading or moving dirt, clay and other materials.

The standard blade float function is ideal for fine finishing or smooth back grading.

The machine is compatible with grading technologies that help even novice operators work faster and more precisely, save time and fuel and maximize productivity, according to the manufacturer.

The 2D Smart Blade assist function, which comes standard, makes precision grading easier. The HD100 also can be ordered Trimble-ready from the factory. This optional 3D machine guidance and 3D machine control system activates automatic blade movements based on GPS coordinates.

Options Add Versatility An LGP (low ground pressure) option is available when ordering the dozer with a wider 10 ft. 7 in. blade vs. the standard 8 ft. 11 in. blade, along with track shoes that are 4 in. wider than the standard shoes. Other available options include a parallel ripper or towing draw bar.

Other key specifications include maximum travel speed of 5.6 mph, seven track rollers, shoe width of 1 ft. 8 in., ground contact pressure of 5.6 psi (38.6 kPa) with a standard blade.

Ground pressure is 4.2 psi (29.0 kPa) with the optional LGP package.

For more information, visit na.hd-hyundaice.com. 

Hardings Heavy Equipment

1501 Lynch Road Evansville, IN 47711 812-425-4428 800-258-4428

109 W. Commercial Ave. Lowell, IN 46356 219-696-8911

2000 Harlan Drive Terre Haute, IN 47802 812-299-4747 888-343-4747

www.hardingsinc.com

120 Flex Park Drive Bowling Green, KY 42101 270-781-1061 800-489-1061

Yes Equipment & Services www.yesequipment.com

11715 W. Silver Spring Rd. Milwaukee, WI 53225 414-263-9001 7001 Manufacturers Drive Madison, WI 53704 608-243-9253

Universal Truck Sales

universaltruckservice.com 2845 Long Lake Road Roseville, MN 55113 651-639-0017

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 26, 2024 • Page 45

Hyundai Heavy & Medium Construction Equipment #032119-HCE

THE DOER’S DREAM MAKE YOUR MOVE Push ... more material with the new Hyundai HD100 crawler dozer's best-inclass power-to-weight ratio.

See ...more than ever with the unobstructed view to the blade.

Engage ...more accurately and more productively with standard 2D or optional 3D machine guidance.

Doze ...with confidence, knowing your new 115 hp Hyundai crawler dozer delivers the quality and value you expect from Hyundai, with the peace of mind that comes with our industry-leading warranty.

No wonder so many first-time Hyundai users become longtime fans.

See the Hyundai difference yourself at your local dealer, or na.hd-hyundaice.com.

Page 46 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 47

TT

1st CHOICE EQUIPMENT LLC www.1stchoiceequipment.com 1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802

ABC EQUIPMENT RENTAL & SALES www.abcequipment.com 29 Pearl Rd. Brunswick, OH 44212 888/572-3888 38525 Chester Rd. Avon, OH 44011 440/934-7368

CENTRAL POWER SYSTEMS & SERVICES kubotacentral.com 1285 Acraway Street Garden City, KS 67846 620/765-3118

COLUMBUS EQUIPMENT COMPANY

www.columbusequipment.com 2329 Performance Way Columbus, OH 43207 614/443-6541 12500 Williams Road Perrysburg, OH 43551 419/872-7101

7570 New Carlisle Pike Dayton, OH 45424 937/879-3154

LANO EQUIPMENT www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763/323-1720 23580 Highway 55 Loretto, MN 55357 763/479-8200 3021 West 133rd Street Shakopee, MN 55379 952/445-6310

YES EQUIPMENT & SERVICES www.yesequipment.com 7001 Manufactures Drive Madison, WI 53704 888/310-3901

A@?>=<;:9?887796:;7?5;74;79:3;21?0/0.-?,/?+;*21?/)?(-''--&-?%292632$?#;7?=4?:;?."?!;2: ?;2?4=76 9 ?;#?2 *?>=<;:9? 0? =34! 2:?;7?6= :;! 7?32 :92: 7 <9: ?;#?,.///?97 ?9 93 9< ?;2?4=76 9 ?;#?2 *?>=<;:9? 0? =34! 2:?#7;!?497:36349:32$? 9 7 ?32 :;6 ?32 2:;7 -?'7;!;:3;29 ?79: ?9 93 9< ?:;? =9 3% 4=76 9 7 ?: 7;=$ ?>=<;:9?57 3:?5;74;79:3;21? - -(- ? =<< 6:?:;?67 3:?9447; 9 -? 9!4 ?."?!;2: ?49 ! 2: ?;#?,0/-" ?4 7?, 1///?%2926 -?& <9: ?2;: 9 93 9< ?*3: ?/)?(-''--&-?;7?;: 7?47;!;:3;29 ?%292632$-? ;! ? 6 4:3;2 ?944 -? ## 7 ? 437 ? 0 0.-?88 7! ? =< 6:?:;?6 92$ -? ;;=7?>=<;:9? 3!3: ?*97792:: ?$3 ;=? 4 63%6? $9 ?73$ : -? ;;=?!99 ? 9 ?;: 7?73$ : ?* 36 ? 97 ?#7;!? :9: ?:;? :9: -?>=<;:9?887796:;7?5;74;79:3;2? ; ?2;:?9=: ;73 ?92 ?4 7 ;2?:;?67 9: ?#;7?>85?92 ;< 3$9:3;2?;7? 39<3 3:: ?;: 7?: 92?: 9:? :9: ?32?: ? 3!3: ?*97792: -?8 3 ?!9: 739 ?3 ?#;7? 6734:3 ?4=74; ?;2 -?>=<;:9? 3 6 93! ?9 ?7 47 2:9:3;2 ?92 ?*97792:3 1 47 ?;7?3!4 3 1?;7?92 ? 39<3 3: ?#7;!?: ?= ?;#?: 3 ?!9: 739 -? ;7?6;!4 : ?*97792: 1? 3 6 93! 7711? 9# : ?92 ?47; =6:?92 ?326 2:3 ?;## 7?32#;7!9:3;21?6;2 = :? ;=7 ;69 ?>=<;:9? 9 7?92 ?: ? *2 7 ? 97792: ? 2#;7!9:3;2? =3 ?#;7?: ?>=<;:9? 3!3: ?*97792:: ?;2?9 ?47; =6: -? 3 3:?>=<;:9 (-6;! 3 6 93! 7 ?#;7?!;7 32#;7!9:3;2-

Page 48 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

altaequipment.com Byron Center, MI 616.878.7450 New Hudson, MI 248.356.5200 Traverse City, MI 231.943.3700 Detroit, MI 313.394.1811 Flint (Burton), MI 810.744.4840

Gaylord, MI 989.731.9988 Sterling Heights, MI 586.474.5063 Bloomington, IL 309.585.3800 Orland Park, IL 708.349.8430 Ottawa, IL 815.313.2070

www.nussgrp.com South Elgin, IL 630.883.3320 Gary, IN 219.977.4210

Burnsville, MN 800.552.1189 Duluth, MN 800.835.MACK Eau Claire, WI 800.494.MACK Mankato, MN 800.862.MACK

Monticello, MN 763.265-2500 Rochester, MN 800.562.1505 Roseville, MN 800.704.0935 St. Cloud, MN 888.310.MACK

www.ruddequipment.com Evansville, IN 812.867.6661 Fort Wayne, IN 260.482.3681 Indianapolis, IN 317.247.9125 Corbin, KY 606.528.9440 Louisville, KY 502.456.4050

Prestonsburg, KY 606.874.2104 St. Louis, MO 314.487.8925 Cincinnati, OH 513.321.7833 Columbus, OH 614.636.4050 Cleveland, OH 216.393.7833

See our com mplette e lineup:

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 49

VT--75 Compact Trrack Loader

Better Machines M Power Better B Work ok

From small landscaping projeects and residential constructioon jobs to acres of excavation, ASV’s all-terrain machines m enable you to work in more places and in more conditions so you cann get more done every day.

DISCOVER R THE ASV LIN NE-UP OF TRA ACK LOADERS S AND SKID ST TEERS AT

Alex Power Equipment www.alexpowerequipment.com 116 50th Avenue West Alexandria, MN 56308 320-763-4994

Quality Equipment

Quality Forklift

www.qualityequipmentmn.com

www.qualityforklift.com

3800 Park Ave NW Faribault, MN 55021 507-338-7080

587 Citation Drive Shakopee, MN 55379 952-895-9918

Roeder Implement www.roederimplement.com 2550 Rockdale Road Dubuque, IA 52003 563-557-1184

CSTK www.cstk.com 401 Shawnee Avenue Kansas City, KS 66105 913-371-0868 St. Louis, MO 314-771-6666 Park City (Wichita), KS 316-744-2061 Oklahoma City, OK 405-577-2222

Ronson Equipment Co. www.ronsonequipment.com 18030 Wicker Avenue Lowell, IN 46356 219-696-5680 10761 West Coulter Road Westville, IN 46391 219-785-2909

© 2024 ASV Holdings, Inc. For more information, visit ASVI.COM.

Page 50 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Authorized Bobcat Dealers

ILLINOIS

INDIANA

MINNESOTA

MINNESOTA

Atlas Bobcat

Atlas Bobcat

Bobcat of Bemidji

Swanston Equipment

Elk Grove Village 847-678-3633 88-438-8014

Merrillville 219-381-3006 www.atlasbobcat.com

Bemidji 218-751-4660 www.goironhide.com

Mokena 708-596-8050 888-438-8014

Bobcat of Evansville

Bobcat of Alexandria 320-460-8773 Bobcat of Fergus Falls 218-739-4505 www.swanston.com

Wauconda 847-526-4255 888-438-8014 West Chicago 630-293-0606 888-438-8014 Yorkville 630-553-0150 888-438-8014 www.atlasbobcat.com

Bobcat of Champaign Champaign 217-607-1454 www.gatewaydealer.com

Bobcat of Marion Carterville 618-985-8920 www.gatewaydealer.com

Bobcat of Springfield Springfield 217-525-0349 www.gatewaydealer.com

Bobcat of St. Louis Fairview Heights 618-397-1847 www.gatewaydealer.com

Evansville 812-422-8200 www.gatewaydealer.com

Bobcat of Michiana Elkhart 574-584-7550 www.bobcatofmichiana.com

IOWA

Sanco Equipment Mason City 641-450-7126 www.sancoequipment.com

KENTUCKY

Bobcat of Bowling Green Bowling Green 270-842-4253 www.gatewaydealer.com

RTL Equipment Big Lake 763-263-0505 www.rtlequipment.com

Farm-Rite Equipment, Inc. Dassel 320-275-2737 888-679-4857 Long Prairie 866-514-0982 320-732-3715 St. Cloud 844-262-2281 Willmar 877-484-3211 www.farmriteequip.com

Lano Equipment, Inc.

Tri-State Bobcat Burnsville 952-894-0894 Little Canada 651-407-3727 www.tristatebobcat.com

NORTH DAKOTA Bobcat of Devils Lake Devils Lake 701-662-5331 www.goironhide.com

Swanston Equipment Bobcat of Fargo 701-293-7325 Bobcat of Minot 701-837-9901 www.swanston.com

Bobcat of Grand Forks Grand Forks 701-772-5006 www.goironhide.com

MICHIGAN

Anoka 763-323-1720 888-448-5266

Niles 269-210-2299 www.bobcatofmichiana.com

Loretto 763-479-8200 888-479-4342

Williston 701-572-5050 www.goironhide.com

MISSOURI

Shakopee 952-445-6310 877-753-6100 www.lanoequip.com

WISCONSIN

Lano Equipment of Norwood, Inc.

Hudson 715-531-0801

Bobcat of Michiana

Bobcat of Effingham Teutopolis 217-717-4550 www.gatewaydealer.com

Bobcat of Brainerd

A Division of RTL Equipment Brainerd 218-829-2800 www.rtlequipment.com

Bobcat of Columbia Columbia 573-886-9435 www.gatewaydealer.com

Bobcat of St. Louis O’Fallon 636-240-9020 Valley Park 636-225-2900 www.gatewaydealer.com

Norwood Young America 952-467-2181 www.lanoequipofnorwood.com

Sanco Equipment Albert Lea 507-373-4490 Stewartville 507-285-0753 Mankato 507-625-4511 www.sancoequipment.com

Bobcat of Williston

Tri-State Bobcat

New Location!

2018 US Hwy 8 St. Croix Falls, WI 715-557-6010 www.tristatebobcat.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 51

IT’S YOUR DRIVE TO DIG IN AND

DETERMINA ATION TO DIG OUT.

PUSHING. DIGGING. DRILLING. THRILLING. Bobcat means trail-blazing, day-saving power and adaptabilit y for any challenge.

Bobcat Company is a member of the Doosan Group. Doosan is a global leader in construction, grounds maintenance and material haandling equipment, power and water solutions, and eng n ineering that has proudly ser ved customer s and communities for more than a centur y.

B obcat ®, the B obcat logo and the color s of the B obcat machine are registered trademarks of B obcat C ompany in the United S t ates and various other countries. © 2 0 24 B obcat C ompany. A ll right s reser ved. | 16 3 0

Page 52 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OFA Promotes Forestry Industry, Showcases Equipment

Bandit Industries and dealer KTS Equipment team up at the Paul Bunyan Show. (L-R) are Jim McLaughlin of KTS Equipment; Brenda Lint of Bandit Industries; Dawn Cook of Bandit Industries; Tyler McLaughlin of KTS Equipment; and Vince Pusateri of Townsend Arborcare with a Bandit 18XP hand-fed drum-style chipper.

Murphy Tractor representatives were on hand to discuss John Deere equipment at the Paul Bunyan Show. (L-R) are Steve Pirnat, Jack Price, Drew Mayfield, Justin Flowers, Brian Mayfield and Todd Merry.

OFA from page 14

Rudd Equipment representatives (L-R) Taylor Dunifon, Michael Metzgar and Mike Bravchock were ready to talk about the dealership’s lineup of Volvo equipment.

The Maverick Environmental team was at the show with some of its product lines. (L-R front row) are Bob Stewart, Zach Stuckey, Kyle Brown and Bryce Blair. (L-R back row) are Charlie Van Dusartz, Lisa Malone, Damon Daughtery and Tony Kotowski.

AGG Corp. participated in demonstrations with the Astec 5710 E horizontal grinder. (L-R) are Andrew Smith, Sean Mcivor, Sue Vitaz, Roberto Armbruster and Tommy McLain, all of AGG Corp.; Derek Izworski and Jared Miller, both of Astec Industries; and Brian Waid of AGG Corp.

Sam Dunning of Bear Hollow Wood Carvers demonstrates chainsaw carving of a bulldog at the Bad Boy Mowers booth.

Columbus Equipment Company showcase its newly added Avant Line at the Paul Bunyan Show. (L-R) are Cindy Ellis, Eric Lewis, Cory Van Houten, Todd Hornak and Mike Haney.

SECTION

Paving Pages 53-71

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

FAE RCU75 Expands Range With RPL/SSL-45 Asphalt Shredder Installation Kit FAE expands its range for the construction sector with a new combination of asphalt shredder and RCU tracked carrier.

Now, with a special installation kit, the RCU75 can be equipped with an RPL/SSL45 asphalt shredder. The addition of this attachment allows FAE to offer customers a wider range of solutions, capable of addressing specific needs across industries.

The RPL/SSL-45 is compatible with the RCU75, can mill up to 7 in. deep and has a working width of 17 in. The head comes standard with modern technological fea-

tures. The combination of self-leveling skids and tilt ensures optimal results even on uneven surfaces. Operational precision is ensured by the hydraulic drive system — which makes it possible to work right up against a wall on the right or left side — as well as practical depth and cutting indicators.

The water system with integrated tank allows for the elimination of dust from machining operations and contributes to cooling the teeth. It also has special teeth, designed specifically for

The RPL/SSL-45 is compatible with the RCU75, can mill up to 7 in. deep and has a working width of 17 in.

Operational precision is ensured by the hydraulic drive system — which makes it possible to work right up against a wall on the right or left side — as well as practical depth and cutting indicators.

use on asphalt and concrete road surfaces.

FAE’s road planers are based on “cold planer” technology. With cold planer technology, the road’s surface is scraped and cut by the impact of special teeth attached to the rotor. The RPL/SSL-45 has a specially designed tooth layout to increase performance and reduce vibration, making it the perfect tool to prepare roads for resurfacing, or to simplify excavation operations.

With these new products, FAE has enhanced its catalog for the construction world, an increasingly important sector in which FAE technology and quality continue to drive innovation.

For more information, visit www.faegroup.com.  (Photos courtesy of FAE.)

Page 54 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

www.rolandmachinery.com

www.rmsequipment.com

DePere, WI 920/532-0165

Eau Clair, WI 715/874-5400

Bridgeton, MO 314/291-1330

Deforest, WI 608/842-4151

Escanaba, MI 906/786-6920

Cape Girardeau, MO 573/334-5252

Franksville, WI 262/835-2710

Springfield, IL 217/789-7711

Columbia, MO 573/814-0083

Schofield, WI 715/355-9898

Carterville, IL 618/985-3399

Palmyra, MO 573/769-2056

Slinger, WI 262/644-7500

East Peoria, IL 309/694-3764

3001 Oxbow Court SW Bondurant, IA 50035 515/282-0404 800/555-1445

1400 North Hwy 75 Sioux City, IA 51105 712/252-0538 800/633-9104

10740 High Life Court SW Cedar Rapids, IA 52404 319/363-9655 800/616-6615

3150 5th Ave. East Moline, IL 61244 309/755-7203 800/633-9114

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 55

BUILT TO CONNECT

Efficiency and Productivity ® ®3000 Designed and operator operator comfort comfortininmind, mind,the theShuttle ShuttleBuggy Buggy material transfer vehicle Designed with with safety and material transfer features adaptive cruise control, bright LED lighting, four-wheel steeringsteering for easy and vehicle features adaptive cruise control, bright LED lighting, four-wheel fortransport easy transport ground-level maintenance access for added convenience.

Operators can rely on clear sightlines and ground-level maintenance access for added convenience. Operators can rely on clear and the ground is safely protected inside theinside structure of the machine.

The Roadtec sightlines and theoperator ground operator is safely protected the structure of the machine.

The SB-3000 is the perfect blend of traditional craftsmanship and modern Roadtec SB-3000 is the perfect blend of traditional craftsmanship andtechnology. modern technology.

astecindustries.com

www.rmsequipment.com

www.finkbinerequipment.com

3001 Oxbow Court SW Bondurant, UA 50035 (515) 282-0404

1400 North Highway 75 Sioux City, IA 51105 (712) 252-0538

5633 W Highway 13 Savage, MN 55378 (952) 895-9595

10740 High Life Court SW Cedar Rapids, IA 52404 (319) 363-9655

3150 5th Avenue East Moline, IL 61244 (309) 755-7203

315 Hoover Road Virginia, MN 55792 (218) 741-9011

314 Garfield Avenue Duluth, MN 55802 (218) 727-8611

3501 N Main Street East Peoria, IL 61611 (309) 863-4831

15W400 N Frontage Road Burr Ridge, IL 60527 (630) 654-3700

Page 56 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Volvo Expands Soil Compactor Lineup With 12-Ton Model, Largest in Portfolio Volvo photo

The 12-ton machine becomes the largest model in the Volvo soil compaction portfolio with an 84-inch smooth-drum and operating weight of 26,565 lbs.

AIS CONSTRUCTION EQUIPMENT www.aisequip.com Grand Rapids, MI 616-538-2400 Lenox, MI 586-727-7502 Williamsburg, MI 231-267-5060 Lansing, MI 517-321-8000 Bridgeport, MI 989-777-0090 New Hudson, MI 248-437-8121

Volvo Construction Equipment is broadening its compaction range in North America with a new model targeting medium- to heavy-duty compaction jobs.

The new SD125 soil compactor is designed to provide exceptional results with low operating and ownership costs, making it a fit for both rental houses and highway contractors, according to the manufacturer.

The 12-ton machine becomes the largest model in the Volvo soil compaction portfolio with an 84-in. smooth-drum and operating weight of 26,565 lbs. (12,050 kg). Its specs are similar to the existing SD115 but with a 0.2 in. (5 mm) thicker drum shell and a heavier outer eccentric weight. This results in an additional 935 lbs. (424 kg) of mass on the drum, increasing the static load and eccentric force for a different amplitude profile.

“The SD125 is a direct response to dealers and customers who have asked for a machine that combines the quality and performance of the SD115 with the heavier weight of a 12ton machine,” said Justin Zupanc, compaction product manager. “We take feedback seriously, and I think this model shows that.”

Superior Performance As terrain and material depths change, the ability to adjust dynamic drum forces is as simple as the flip of a switch on the new SD125. Another switch adjusts the two drum frequencies to compensate for changing conditions, and a fivefrequency feature is available as an option to further boost versatility and performance.

The center joint provides +/-35 degrees of articulation and +/-12 degrees of drum oscillation for stable yet flexible performance and greater operator comfort over rough terrain.

Because the drum is in constant contact with the ground, compaction is smooth and uniform.

The additional static weight on the drum frame enhances stability and performance with the ability to negotiate 35 percent slopes for better gradeability. The angled frame allows higher clearance in the approach to steep slopes and while loading, eliminating the possibility of damaging the surface or the machine. The frame and articulation joint are covered

by the Volvo Lifetime Frame and Structure Warranty.

A heavy-duty axle is integrated into the drivetrain for an efficient rear wheel drive system. The No-Spin differential increases traction, eliminates tire slippage and improves gradeability, performance and productivity. A high-traction variant is available for demanding applications where additional torque is needed to tackle extreme slopes or thick lifts of loose material.

All three levels of Compact Assist software are available on the in-cab tablet (the Volvo Co-Pilot) allowing users to determine the visibility, mapping and reporting features that are most important to them.

More Sustainable Design The SD125 features a powerful Tier IV F four-cylinder Volvo engine with 147.5 hp (110 kW). Active DPF regeneration eliminates material build-up, further reducing emissions. The engine is backed by Volvo dealer service and parts support and a 1,000-hour warranty.

Additional features include: • A hydraulically operated engine cooling fan that runs only when needed, reducing fuel consumption.

• Lower noise levels for operator comfort.

• Optional fan reverse for cleaning out the coolers.

• Volvo long-life coolant to protect the machine for up to 6,000 hours.

• Remote hydraulic test ports that can be configured to enable quick and easy hydraulic checkpoints without having to open the system.

In line with the Volvo commitment to safety, the emergency stop system shuts down the engine, applies the brakes and stops the machine’s movement if the operator rises from the seat for more than five seconds during operation.

The SD125 is designed and built at the Volvo CE North American headquarters in Shippensburg, Pa., along with all Volvo asphalt and soil compactors. This year marks 50 years of compaction engineering and manufacturing at the site.

The SD125 will be available for order in North America during the first half of 2025.

For more information, visit www.volvoce.com. 

MURPHY TRACTOR & EQUIPMENT CO., INC. www.murphytractor.com Park City, KS 316-942-1457 Great Bend, KS 620-792-2748 Topeka, KS 785-233-0556 Ulysses, KS 620-356-1071 Dodge City, KS 620-227-3139 Gering, NE 308-436-2177 Omaha, NE 402-894-1899 Lincoln, NE 402-467-1300 Grand Island, NE 308-381-0741 North Platte, NE 308-534-7020 Kansas City, MO 816-483-5000 Springfield, MO 417-863-1000 Des Moines, IA 515-263-0055 Fort Dodge, IA 515-576-3184 Sioux City, IA 712-252-2753 Waterloo, IA 319-235-7085

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 57

A WIRTGEN GROUP COMPANY

We’re passionate about your success COST-EFFICIENT AND COMPACT PROFESSIONAL MACHINE | W 200 F(i)

> The innovative MILL ASSIST machine control system guarantees low operating costs.

> Achieve new standards of quality with the new LEVEL PRO ACTIVE leveling system.

> MCS BASIC enables milling drums to be changed quickly, thus ensuring high flexibility and machine utilization. www.wirtgen.com/milling

WIRTGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T: (615) 501-0600

ROLAND MACHINERY

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502-491-4000 Evansville, IN 812-425-4491

Corbin, KY 606-528-3700 Lexington, KY 859-259-3456 Stanville, KY 606-478-9201

Paducah, KY 270-444-8390 Indianapolis, IN 317-872-8410 Ft.Wayne, IN 260-489-4551

www.rolandmachinery.com DePere WI 920-532-0165 Deforest WI 608-842-4151 Franksville WI 262-835-2710 Schofield WI 715-355-9898

Slinger, WI 262-644-7500 Eau Claire, WI 715-874-5400 Escanaba MI 906-786-6920 Springfield, IL 217-789-7711

Marengo, IL 815-923-4966 Bolingbrook IL 630-739-7474 Carterville, IL 618-985-3399 East Peoria, IL 309-694-3764

Bridgeton, MO 314-291-1330 Cape Girardeau, MO 573-334-5252 Columbia, MO 573-814-0083 Palmyra, MO 573-769-2056

Portage, IN 219-764-8080

Page 58 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

MAULDIN Paving Products... MASTERS OF O THE MA AT! Designed d, Manufactured and Perfected in South Carolina

Southeastern Equipment Co., Inc.

American State Equipment

Finkbiner Equipment

J&K Equipment

Berry Tractor

www.Amstate.com

www.finkbinerequipment.com

www.jandkequipmentinc.com

www.berrytractor.com

Cambridge, OH 740-432-6303

www.southeasternequip.com Novi, MI 248-349-9922

Mansfield, OH 419-529-4848

Wausau, WI 800-242-7113

Burr Ridge, IL 630-654-3700

Menahga, MN 218-366-1475

Wichita, KS 316-943-4246

Evansville, IN 812-476-7321

Brilliant, OH 740-598-3400

Marietta, OH 740-374-7479

Little Chute, WI 800-236-8318

East Peoria, IL 309-863-4831

Fort Wayne, IN 260-483-8868

Brunswick, OH 330-225-6511

Mentor, OH 440-255-6300

Milwaukee, WI 414-541-8700

Indianapolis, IN 317-872-4877

Dublin, OH 614-889-1073

Monroe, OH 513-539-9214

www.cmw-equip.com

Burlington, KY 859-586-6133

Gallipolis, OH 740-446-3910

North Canton, OH 330-494-3950

Bridgeton, MO 314-993-1336

Holt, MI 517-694-0471

Heath, OH 740-522-3500

Perrysburg, OH 419-874-0331

Topeka, KS 785-266-9509

CMW Equipment

Garden City, KS 620-227-2290 Springfield, MO 417-831-2651

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 59

% % %% %

Compaction and paving solutions

)('(&%$#"%$!%$ % "" )( " '%&&$ $

%

www.altaequipment.com

www.cpower.com

181 Oak Leaf Oval Oakwood Village, OH 44146 440-439-4000

3725 Old 27 S. Gaylord, MI 49735 888-928-4485

2500 Westward Drive Spring Grove, IL 60081 815-581-9819

4501 West Irving Wichita, KS 67209 316-943-1231

5105 Loraine Street Detroit, MI 48208 313-710-6908

1061 Stepke Court Traverse City, MI 49685 231-642-9637

613 E Stevenson Road Ottawa, IL 61350 815-587-7399

1285 Acraway Garden City, KS 67846 620-765-3118

56195 Pontiac Trail New Hudson, MI 48165 248-665-8488

2917 Ashmun Street Sault Sainte Marie, MI 49783 888-348-1953

1035 Wylie Drive Bloomington, IL 61705 309-808-6602

1944-B North 9th Street Salina, KS 67401 785-825-8291

G 3283 S Dort Hwy Burton, MI 48529 810-484-0669

18405 115th Avenue Orland Park, IL 60467 888-508-3903

1920 Thielen Avenue Colby, KS 67701 785-462-8286

8840 Byron Commerce Dr SW Byron Center, MI 49315 616-345-5499

420 Nolen Drive South Elgin, IL 60177 888-658-4890

3305 S West Street Wichita, KS 67217 316-789-7370 1900 Plumbers Way Liberty, MO 64068 806-415-6700

www.cmcky.com

www.brookstractor.com Madison (Sun Prairie) 1900 W. Main St. Sun Prairie, WI 53590 608-837-5141

Stevens Point (Plover) 5429 Prairie Dr. Plover, WI 54467 715-254-2777

Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414-462-9790

Racine (Mount Pleasant) 1609 SE Frontage Rd. Mt. Pleasant, WI 53177 262-898-6700

Green Bay (De Pere) 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711

2900 Bicycle Street Sparta, WI 54656 608-351-2101

2911 S English Station Rd Louisville, KY 40299 502-267-4020 2235 Ragu Drive Owensboro, KY 42303 270-683-2000 4923 Rockwell Road Winchester, KY 40391 859-759-4404 6104 Sable Mill Court Jeffersonville, IN 47130 812-850-6160

La Crosse (West Salem) 451 W. Avenue N. West Salem, WI 54669 608-786-2644

dynapac.u us | 800-651-0033 Follow Dynapaac North America

% %

%

% % %

Page 60 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-685-4998

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 35 Years 2005 Etnyre Centennial distributor, 2000 gallon, computerized w/1 ft cut-offs, 12 ft spray bar, propane heat, spray wand & hose, front mount pump, GMC C7500 w/Cat C7 dsl eng, manual 7 spd trans, a/c, 154,181 miles - $64,000

2021 Weiler P385B track paver, 8-16 ft electric heated 2023 Bomag BW120AD-5 double drum 47” vibratory vibratory screed, Cat dsl eng, 9 ton hopper, dual opera- roller, Deutz dsl eng, water system, 61 hrs, 3 tons $39,500 tor controls - $108,000

2019 Volvo DD30B double drum 49” vibratory roller, Kubota diesel eng, double drum drive, water system, 3 tons - $26,000

New Marathon TPS500PT tack distributor, gas eng, 18GPM pump, 500 gal, spray wand w/50 ft hose, hose reel, 6 ft spray bar, operator’s platform, propane burners, flushing system - $31,850

2021 Rosco Trupac 915 pneumatic roller, 9 wheel rubber tire, Cummins diesel engine, joystick control, water system - $17,500

2014 Superior DT80-J broom, JD 4045T dsl eng,8 ft broom, heat & a/c, water system, New tires, broom core 75%-80% - $35,000

2008 Bomag BW9AS double drum static roller, Cummins 3.3L diesel engine, 50” drums, water system - $10,000

New Marathon TPS250PT tack distributor, gas eng, 18GPM pump, 250 gal, spray wand w/50 ft hose on reel, 6 ft spray bar, propane burners, flushing system $21,200 (also avail without spray bar)

3517 Wayne White Rd., Climax, NC 27233

Dynapac’s New VI Generation Uses Large Model Technology Dynapac has introduced the new 8-ton tandem asphalt roller CC2200 VI. The CC2200 VI belongs to a series of new rollers from 8 to 10 ton with drum width 59 to 66 in. It comes with numerous new features that ensure optimal paving results, operational efficiency and operator comfort, the manufacturer said.

New Range of Rollers The new range includes three articulated models (CC2200VI, CC3200VI, CO2200VI) and an additional two fixed frame pivot steer split drum models (CX8 and CX9) from 59 to 66 in. drum widths.

Combination versions also will be available in select models of this range.

The New VI Generation midrange roller uses sevDynapac photo eral technologies from its larger counterpart CC4200VI-6200VI, like 180-degree seat rotation, an efficient eccentric system combined with active ECO mode to reduce fuel consumption and carbon footprint, and full backup water sprinkler systems. A newly upgraded simplified operator control panel for this series with a full-color seven-inch touchscreen display provides more machine controls for the operator.

More Comfort, Control The Dynapac CC2200 VI has been designed for maximum operator comfort and safety. Its ergonomically designed interior comes with a new operator interface, including a full-color seven-inch touch display and easy access to all controls. The optional 360-degree pedestrian detection camera provides operators with a continuous “bird’s eye” view while working, offering more comfort and safety on the job site.

The corrosion-free water tank is mounted low in the front frame, which contributes to the 1x1 m view and full visibility of the drum surface and drum spray nozzles. The seat and steering module welcome drivers with 180-degree rotation and full sliding function.

The CC2200 VI also can be equipped with various extra features designed to best fit local conditions including an operator’s platform with CAB, Automatic Climate Control, Full 255-degree seat rotation and more.

SEISMIC Sensation The Dynapac CC2200 VI comes with SEISMIC asphalt technology that offers benefits for both optimal compaction and operator comfort. SEISMIC asphalt automatically determines the optimal frequency for any compacted material, constantly monitoring the variations of the asphalt layer, and automatically adjusts to temperature conditions. The SEISMIC asphalt system is active on both drums to help reduce the required vibration power and energy consumption during compaction. The resulting lower noise levels and vibrations within the cabin provides the operator with greater comfort while delivering optimal compaction on the job site, according to the manufacturer.

Smart Communication, Compaction, Documentation The Dynapac CC2200 VI can be equipped with the optional unique Dyn@Lyzer system. As a state-of-the-art compaction control and documentation system, Dyn@Lyzer records and maps the stiffness and compaction progress of the compacted asphalt layer in real-time, as well as measures the asphalt temperature and number of completed passes. It additionally functions as a quality control and assurance device, as well as a productivity tool to optimize the compaction effort.

Seamless communication is key during any compaction job, which is why operators can also look forward to an open interface for 3rd party compaction control systems.

Savings, Sustainability As with all Dynapac products, the CC2200 VI meets the strictest environmental regulations including automatic idling to reduce fuel consumption and lower noise emissions. Additionally, the unique active ECO mode can save up to 20 percent more fuel and comes standard for the Tier IV final and Stage V engines. Biodegradable hydraulic fluid is an optional alternative. The SEISMIC asphalt system will improve upon these to further increase fuel savings even more.

For more information, visit dynapac.com. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 61

BUILT TO CONNECT

High Performance, Quality A Workhorse To Depend On Results The CP100II sets theIIstandard for versatility, component lifecycle Carlson CP100 sets the standard for versatility, component and mat quality.

With a powerful 100 horsepower engine, lifecycle and mat quality. With a powerful 100hp engine, an an array array of configurations and the class-leading Carlson EZCSS of configurations and the class-leading EZCSS single slide screed, single slide screed, it’s easy to see why the CP100II is the ideal it’s timefor to see why the commercial CP100 II haspaving. fast become the contractor’s choice heavy-duty

choice for heavy-duty commercial paver platforms.

astecindustries.com

www.ruddequipment.com 4344 Poplar Level Road Louisville, KY 40213 (502) 456-4050

2655 Kentucky Avenue Indianapolis, IN 46221 (317) 247-9125

728 W Cumberland Gap Pkwy Corbin, KY 40701 (606) 528-9440

11807 Enterprise Drive Cincinnati, OH 45241 (513) 321-7833

2114 Highway 1428 E Prestonsburg, KY 41653 (606) 874-2104

2451 E Enterprise Pkwy Cleveland, OH 44087 (216) 393-7833

6901 Highway 41 N Evansville, IN 47725 (812) 867-6661

2512 Jackson Pike Columbus, OH 43223 (614) 636-4050

5820 Industrial Road Fort Wayne, IN 46825 (260) 482-3681

www.swanston.com 3450 W Main Avenue Fargo, ND 58103 (701) 293-7325 3915 E Burdick Expy Minot, ND 58703 (701) 837-9901

Page 62 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Contractor Employs Cold Recycling Train With Vögele SUPER 2100-5i Paver Wirtgen photo

www.brandeismachinery.com 17000 Highway 41 N Evansville, IN 47725 812/425-4491

1389 Cahill Drive Lexington, KY 40504 859/259-3456

7310 Venture Lane Ft. Wayne, IN 46818 260/489-4551

160 County Park Road Paducah, KY 42001 270/444-8390

8410 Zionsville Road Indianapolis, IN 46268 317/872-8410

130 Mare Creek road Stanville, KY 41659 606/478-9201

1801 Watterson Trail Louisville, KY 40299 502/491-4000 1484 American Greeting Card Road Corbin, KY 40701 606/528-3700

535 Modern Way Bowling Green, KY 42101 270/780-3004

www.rolandmachinery.com

The Wirtgen W 240 CRi cold recycler transfers the prepared material by conveyor to the Vögele SUPER 2100-5i paver, which paves it immediately.

The project was to renew the agricultural road near the Dutch village of Ferwert quickly and economically using low-emission machinery.

The contractors decided to use the in-place cold recycling method, preparing the reclaimed material on site immediately and then reuses it for the paving process. They used a tried and tested combination of Wirtgen Group machines: the W 240 CRi cold recycler from Wirtgen and the new SUPER 2100-5i Highway Class paver from Vögele.

The environmental performance of road construction projects is becoming more and more of a focus. In-place cold recycling has become established as a resource-saving technique which also delivers economic benefits as a result of the time and expense saved.

The Dutch companies KWS and Freesmij opted for this rehabilitation method on the 0.8 mi. long and 10.2 ft. wide asphalt road near the village of Ferwert. The paving crew used the Wirtgen Group cold recycling train to mill off the existing asphalt layer and also to prepare the material on site (also called “in situ” or “in-place”) and make a new base course of bitumenstabilized material (BSM) by mixing in binders and other aggregates.

“In-place cold recycling is the response to the ecological and economic demands of modern road construction,” said Raymond van de Stadt, managing director asphalt at primary contractor KWS. “In just two days, we renewed the entire stretch of road using 100 percent recycled material, thereby significantly reducing CO₂ emissions and, of course, saving time and costs compared to conventional methods.”

Another benefit of cold recycling was key in this application on a narrow agricultural road: the entire recycling train takes up the width of just one lane. To rehabilitate the 10.2 ft. wide road in one pass, the team first used a W 100 Fi compact milling machine from Wirtgen to pre-mill at a width of 3 ft. and a depth of 5.9 in.

This was followed by the cold recycling train, consisting of water and bitumen tank wagons, the Wirtgen W 240 CRi cold recycler and the new SUPER 2100-5i large paver from Vögele. As this process prepares the reclaimed material in situ and uses it for the paving process immediately, both the recycler and the paver had to achieve a high output.

The W 240 CRi can produce up to 882 tons of material an hour at a max-

imum pave width of 7.7 ft., while the SUPER 2100-5i can take up to 22 tons of material with an extra material hopper and pave up to 1,213 tons per hour.

On the job site in Ferwert, the cold recycler milled out the old road material to a depth of 5.9 in. in one pass, and in the mixing chamber prepared the material to form homogeneous BSM by adding foamed bitumen using an integrated Vario spray bar.

The W 240 CRi then transferred the material to the following Vögele paver, which paved the 5.9 in. high base course at a speed of around 13.1 ft. per minute. After completion of the recycling work, the SUPER 2100-5i sealed the base course with a 1.6 in. thick asphalt surface course.

The contractors relied on environmentally-friendly technologies, both for the machines used and for the rehabilitation process itself. The Vögele large paver of the new “Dash 5” generation features a particularly sustainable drive concept, for example: with a 6cylinder John Deere engine, the SUPER 2100-5i meets European exhaust emissions standard stage 5 and still achieves 178 kW at 1,700 rpm, even in ECO mode. see FERWERT page 68

Springfield, IL 217/789-7711

Eau Claire, WI 715/874-5400

Carterville, IL 618/985-3399

DePere, WI 920/532-0165

East Peoria, IL 309/694-3764

Deforest, WI 608/842-4151

Portage, IN 219/764-8080

Franksville, WI 262/835-2710

Bridgeton, MO 314/291-1330

Schofield, WI 715/355-9898

Cape Girardeau, MO 573/334-5252

Slinger, WI 262/644-7500

Columbia, MO 573/814-0083

2600 S. Lincoln Rd. Escanaba, MI 906/786-6920

Palmyra, MO 573/769-2056

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 63

www.casey-equipment.com www.rmsequipment.com 5633 W Hwy 13 Savage, MN 55378 952/895-9595 800/888-9515 Rochester, MN 507/701-0199 Duluth, MN 218/727-8611 800/888-9535 Virginia, MN 218/741-9011 800/752-4304

Sioux City, IA 217/252-0538 800/633-9104 Des Moines, IA 515/282-0404 800/555-1445 Cedar Rapids, IA 319/363-9655 800/616-6615 East Moline, IL 309/755-7203 800/633-9114

www.kirby-smith.com 8320 Ruby Avenue Kansas City, KS 66111 913/850-6300

1603 East Algonquin Rd. Arlington Heights, IL 60005 847/437-8686 16754 New Ave. Lemont, IL 60439 630/257-1261 1548 Huntwood Drive Cherry Valley, IL 61016 815/332-8222

www.rmsrentals.com 12520 Quentin Ave S. Suite 100 Savage, MN 55378 952/895-9595 800/888-9515

Page 64 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Concrete Industry Management...

CIM Seeks Donations for 2025 Auction at World of Concrete CIM photo

ZieglerCAT.com Bemidji, MN 218-751-1033 Brainerd, MN 218-829-9800 Buhl, MN 218-258-3232 Columbus, MN 651-982-5600 Crookston, MN 218-281-4245 Duluth, MN 218-722-6628

Wichita, KS 316-943-4211 Chanute, KS 620-431-3600 Colby, KS 785-462-3913 Concordia, KS 785-243-1960 Dodge City, KS 620-225-4121

“The proceeds from the 2025 CIM Auction will benefit the CIM National Steering Committee [NSC] and support the current CIM programs…”

Ben Robuck Concrete Industry Management

The Concrete Industry Management (CIM) program — a business-intensive program that awards students with a four-year Bachelor of Science degree in Concrete Industry Management — is seeking donations for its 2025 CIM Auction to be held at World of Concrete. The auction is scheduled for Wednesday, Jan. 22, 2025, at the Las Vegas Convention Center. The silent auction will be held from 11 a.m. to 1 p.m. and the live auction begins at 1 p.m.

“The proceeds from the 2025 CIM Auction will benefit the CIM National Steering Committee [NSC] and support the current CIM programs at Middle Tennessee State University, New Jersey Institute of Technology, Texas State University, California State University – Chico, South Dakota State University, and the Executive MBA program, as well as help fund scholarships,” said Ben Robuck, chairman of the CIM Auction committee.

Once again, the CIM Auction organizers are hoping for a record event in 2025.

According to CIM Marketing Committee Chairman Brian Gallagher, the 2024 auction

was a tremendous success, raising more than $1.80 million in gross revenue.

“The annual CIM Auction is a critical funding mechanism for the CIM NSC,” said Gallagher. “We’ve been blessed with tremendous support from the concrete industry and the World of Concrete Show Management has been an amazing partner.”

World of Concrete exhibits are open from Jan. 21 to 23 and seminars run Jan. 20 to 23.

Last year’s auction items included two concrete mixer trucks, a concrete pump, a laser screed and much more. Other donated items included cement, fly ash, aggregate, concrete saws, drills, safety equipment, training sessions, reference books and software subscriptions, sports travel packages, golf and vacation travel packages and much more.

Those interested in donating to the auction should contact CIM Auction Committee Chairman Ben Robuck at 404/456-6867 or ben.robuck@cemex.com.

For more information, visit www.concretedegree.com. 

Fergus Falls, MN 218-736-2680 Jackson, MN 507-847-7600 Madison, MN 320-598-3150 Mankato, MN 507-388-1444 Marshall, MN 507-532-4403 Minneapolis, MN 952-888-4121

Rochester, MN 507-285-1775 Shakopee, MN 952-887-4570 St. Cloud, MN 320-253-2234 Wilmar, MN 320-235-8123 Altoona, IA 515-957-3828 Atlantic, IA 712-243-1039

foleyeq.com =Great Bend, KS 620-792-5246 Kansas City, MO 816-753-5300 Liberal, KS 620-626-6555 Manhattan, KS 785-537-2101 Olathe, KS 913-393-0303

Evansville, IN 812-425-4651 Jeffersonville, IN 812-284-1217 Ashland, KY 606-928-3444 Bowling Green, KY 270-843-3275 Brandenburg, KY 502-775-2660 Corbin, KY 606-528-3140

www.boydcat.com Dry Ridge, KY 859-823-1500 Elizabethtown, KY 270-769-1300 Hopkinsville, KY 270-885-1700 Lexington, KY 859-254-2756 Jeffersontown, KY 502-244-5700 Louisville, KY 502-774-4441 Paducah, KY 270-443-3631

Fenton, MO 636-343-5900 Cape Girardeau, MO 573-332-1122 Columbia, MO 573-442-6880 Foristell, MO 636-673-2530 Joplin, MO 417-624-3010 Springfield, MO 417-866-6651

Willow Springs, MO 636-680-1359 Salem, IL 618-548-1400 Mt. Carmel, IL 636-680-1514 Troy, IL 636-660-0029 Milwaukee, WI 414-461-9100 Eau Claire, WI 715-874-5100

Fort Dodge, IA 515-576-3161 Mason City, IA 641-423-7240 New Hampton, IA 641-394-4226 Postville, IA 563-864-7461 Sheldon, IA 712-324-5604 Sioux City, IA 712-252-4401

Park City, KS 316-943-4211 Salina, KS 785-825-4661 Sedalia, MO 660-829-7400 St. Joseph, MO 816-233-2516 Topkea, Ks 785-266-5770

Pikeville, KY 606-437-6265 Jackson, OH 740-286-7566 Belle, WV 304-949-6400 Crab Orchard, WV 304-253-2706 Nitro, WV 304-759-6400 Parkersburg, WV 304-424-0200

fabickcat.com Green Bay, WI 920-498-8000 La Crosse, WI 608-783-4891 Madison, WI 608-271-6200 Superior, WI 715-398-9696 Wausau, WI 715-359-6220 Marquette, MI 906-475-4191

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 65

The work may be under your feet, but you’re looking ahead - to the next challenge and the next deadline. Your local Cat Dealer

Built to Exceed the Demands of the Commercial Paving Contractor

WE’RE RIGHT THERE WITH YOU Bismarck, ND 701-223-0890 Devils Lake, ND 701-665-3800 Dickinson, ND 701-456-1400 Fargo, ND 701-280-3100 Grand Forks, ND 701-775-4238

butlermachinery.com Jamestown, ND 701-251-1400 Minot, ND 701-852-3508 Aberdeen, SD 605-225-6240 Rapid City, SD 605-342-4850 Pierre, SD 605-224-5400

Sioux Falls, SD 605-336-3010 Watertown, SD 605-954-7100 Huron, SD 605-353-1200

michigancat.com Grand Rapids, MI Kalamazoo, MI 616-827-8000 269-383-7880 Kalkaska, MI Lansing, MI 231-258-8265 517-699-4800 Macomb, MI Metro South, MI 586-997-5300 734-479-5800 Novi, MI Saginaw, MI 248-349-4800 989-752-7300

Page 66 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

NEW IN STOCK

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 67

Page 68 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

You’ve earned the bonus round Make the move to intelligent asphalt paving Topcon asphalt paving solutions deliver smooth results on highways, parking lots, and runways around the world. Take advantage of road planning and design software, as well as machine control systems for your paving, milling, and compaction projects. You will set the curve for your IRI scores to operate in the black while earning your team extra green.

Winning the bonus round has never been easier.

Scan the QR code to get in touch. We’ll take care of the rest.

Learn more at topconpositioning.com/us/en/campaigns/the-bonus-round

Updated Material Handling Control System Proves Key FERWERT from page 62

The intelligent engine management system and Vögele EcoPlus optimized lowemissions package also reduce fuel consumption and CO₂ emissions by up to 25 percent. The splitter gearbox, the controlled hydraulic oil temperature circuit, the energyoptimized tamper stroke and the speed-controlled fan all contribute to the reduction.

Another new feature of the “Dash 5” pavers — the updated material handling control system — also was beneficial in terms of the environmental performance and quality of the construction project. The auger and conveyors now communicate with one other, ensuring that material feed is even more consistent and precisely coordinated. This avoids load peaks, saves fuel, enables an optimum head of mix, and so uninterrupted paving.

The new hydraulically extendable limiting plate for the auger tunnel, called the Power Tunnel, additionally ensured an optimum material height in front of the AB 500 TV extending screed used on the job site.

Equipped with tamper bar and vibrator compacting systems, the screed also achieves

a high degree of pre-compaction. With the hydraulic tamper stroke adjustment, the paving team was able to adjust the tamper stroke at the touch of a button from 0.16 in. to 0.32 in., optimally setting it within seconds for paving the base course and then the surface course. This significantly shortens setup times compared to mechanical adjustment. The adjustment method also ensured optimum pre-compaction, good screed floating behavior, and consequently an ideal paving result.

After only two days, the entire 0.8 mi. stretch of road was completely rehabilitated.

This successful test run convinced the contractors of the economic and environmental benefits of the method. The resource-saving use of material, the high quality of the prepared material, the reduced transportation required and the drop in CO₂ emissions — as well as rehabilitation in one pass — make a significant contribution to greater climate protection and efficiency in road construction.

For more information, visit wirtgengroup.com. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 69

Swanston Equipment www.swanston.com 3450 W Main Ave. Fargo, ND 58103 800-369-0371 3915 Burdick Expressway E. Minot, ND 58703 800-210-8766 712 Frontier Dr. Fergus Falls, MN 56537 218-739-4505

Taylor Construction Equipment www.taylorconstructionequipment.com 312 Peterson Drive Elizabethtown, KY 42701 270-257-4220 920 Wing Avenue, Ste B Owensboro, KY 42303 812-250-5001

FAE A ROAD PL AN A ERS: TH E SU U PE R IOR SOL LUTION YOU ’ V E B EEN WA ITI N G FOR .

To learn more scan here.

(770) 407 2014 - info@faeusa.com

fae - group .com

Page 70 • October 26, 2024 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

The Worldwide Leader in Concrete Paving Technology

www.gomaco.com ❘ info@gomaco.com GOMACO offers the full range of concrete slipform pavers, curb and gutter machines, trimmers, placer/spreaders, texture/cure machines and bridge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+® control system, created in-house by our software engineers from the wants and needs of contractors paving in the field. At the heart of GOMACO equipment is our passion for concrete and our commitment to our customers. We look forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs. Our worldwide distributor network and our corporate team always stand ready to serve and assist you.

HAYDEN-MURPHY EQUIPMENT CO.

ROAD MACHINERY & SUPPLIES CO.

SWANSTON EQUIPMENT

www.hayden-murphy.com

www.rmsequipment.com

9301 E. Bloomington Frwy Minneapolis, MN 55420 329 2nd Street Industrial Building 145 Proctor, MN 55810 800-352-2757 • Fax: 952-884-2293

Des Moines, IA 515-282-0404 • 800-555-1445 Sioux City, IA 712/252-0538 • 800/633-9104 Cedar Rapids, IA 319-363-9655 • 800-616-6615 East Moline, IL 309-755-7203 • 800-633-9114

www.swanston.com 3450 West Main Fargo, ND 58103 800-369-0371 3915 Burdick Expressway E. Minot, ND 58703 800-210-8766

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 26, 2024 • Page 71

Alta Equipment Company altaequipment.com

Nuss Truck & Equipment www.nussgrp.com

Bryon Center, MI 616.878.7450

Flint (Burton), MI 810.744.4840

Orland Park, IL 708.349.8430

New Hudson, MI 248.356.5200

Gaylord, MI 989.731.9988

Ottawa, IL 815.313.2070

Traverse City, MI 231.943.3700

Sterling Heights, MI 586.474.5063

South Elgin, IL 630.883.3320

Detroit, MI 313.394.1811

Bloomington, IL 309.585.3800

Gary I N 219.977.4210

2195 W est County Road C 2 Roseville, MN 55113 651.633.4810

12540 Dupont Avenue South Burnsville, MN 55337 952.894.9595

2625 Quail Road St. Cloud, M N 56379 320.253.6941

53976 208 Lane Mankato, MN 56002 507.345.6225

9403 Westgate Blvd.

Duluth, MN 55810 218.628.0333

Monticello, MN 763.265.2500

Swanston Equipment www.swanston.com 3450 W Main Ave. Fargo, N D 58103 800.369.0371 3915 Burdick Expressway E. Minot, ND 58703 800.210.8766 712 Frontier Dr. Fergus Falls, MN 56537 218.739.4505

Page 72 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contractor Opts for DEVELON to Ease Work in Tight Spaces DEVELON from page 8

“I think the biggest motivator for me doing outdoor work is the overall satisfaction I get from transforming a customer’s property from something that could be messy or dirty into something that looks clean, looks nice, and is really what they are after,” he said. “Fulfilling their dreams.”

Overcoming Challenges Like many landscaping companies, Wood Duck Landscapes faces the challenge of finding not only enough skilled labor but also employees who are motivated and dedicated to their work.

“It’s not necessarily about getting people; it’s about finding the right people that have a good attitude,” Eike said.

“That’s been our biggest challenge.”

One of the ways Wood Duck Landscapes has recruited and retained employees is with its equipment. The company invests in compact machines, like mini excavators and compact track loaders, that are comfortable for the operators who spend countless hours in them.

“To have great air conditioning, a comfortable seat and plenty of legroom really makes those longer days of operating that much more comfortable and more feasible for employees,” he said.

Embracing Technology Social media is Eike’s go-to source for finding the latest landscaping trends. That’s where he came across a contractor named Matt Quinnell of Advanced Wall Structures in Minnesota and picked up some tips about attachments for compact equipment.

“They do a lot of boulder wall retaining work,” Eike said.

“And we were faced with the same situation. We had a crew working with heavy granite boulders, so I was looking at what he was doing. The best solution for us was to find a really strong rotating grapple that is reliable and dependable.”

Eike purchased a rotating grapple attachment and a quick coupler, and he paired them with a DEVELON DX62R-7 mini-excavator from RTL Equipment.

“Previously, we used a bucket and thumb, like most other contractors do,” Eike said. “The biggest challenge for us in doing that is that we don’t have a lot of space to work or to

move the machine to get just the right angle we need. Having the rotating function allows us to stay stationery and grab boulders in place, eliminating the time wasted moving the machine to set each boulder.”

Wood Duck Landscapes has paired another DEVELON mini-excavator with a tiltrotator accessory, inspired by Advanced Wall Structures and the work the company does building retaining walls with boulders.

Productive Pair It’s not uncommon in the landscaping industry for contractors to use both a mini-excavator and a compact track loader. Wood Duck Landscapes does the same for many of its projects due to confined job sites and the many times operators are moving materials in tight spaces.

Eike and his operators use mini-excavators and compact

Winter Work Jack Eike and his Wood Duck Landscapes employees will continue working in winter as long as the ground doesn’t freeze. In recent years, that’s often not until January.

Once cold weather halts the company’s landscaping work, Eike and his employees switch to snow removal. The company owns a DEVELON wheel loader and rents additional wheel loaders from the local dealer. They use their compact track loaders in tandem with the wheel loaders for commercial snow removal. The machines are paired with snow pushers or buckets to efficiently clear snow from parking lots.

Visibility can be difficult when clearing snow. Between blowing snow and frequent night work, it’s often hard for wheel loader operators to see clearly. Last winter, Eike rented a DEVELON wheel loader with the transparent bucket feature, which he said made a significant difference.

“I used the transparent bucket feature in snow removal, mainly to see when my front tires were coming up to either an obstacle, a curb or something that I couldn’t either hit or travel over,” Eike said. “It was definitely useful in those scenarios.” 

DEVELON photo

The compact track loader helps carry boulders to the area where the mini-excavator is positioned to lift, rotate and place the boulders on projects like shoreline repairs.

track loaders in tandem to bring materials from their staging lot or roadside to the work area. Once at the area, the miniexcavators remove old landscaping products or excavate to install the new materials. As the excavator removes the material, the compact track loader loads it in the bucket and transports it out of the area. The compact track loader helps carry boulders to the area where the mini-excavator is positioned to lift, rotate and place the boulders on projects like shoreline repairs.

The tracked undercarriage of his compact track loaders is essential to the success of Wood Duck Landscapes.

“Having a tracked undercarriage for a compact loader is a night and day difference for our operation,” he said. “Living in Iowa, it rains a lot, and we have very soft and slick soils, and using wheeled machines [skid-steer loaders] cuts our ability to work by a significant amount versus having track machines. It allows us to get back to work sooner than a wheeled machine does.”

It’s probably no surprise that Eike has found other ways to generate other income. His latest endeavor is a company called Deluxe Docks and Lifts, offering high-quality docks and lifts, as well as a barge for installation and removal services.

“Deluxe Docks and Lifts furthers our vision of being one source for a total outdoor contractor,” Eike said.

Eike’s entrepreneurial spirit will likely lead to new endeavors along the way. Until then, work is already secured for months in advance as homeowners eagerly await new hardscape and landscape features.

About DEVELON North America DEVELON North America is headquartered in Suwanee, Ga., and markets the DEVELON (de•VEL•on) brand of products. These products include crawler, wheel and miniexcavators; material handlers; log loaders; dozers; wheel loaders; articulated dump trucks; compact track loaders and attachments.

With more than 200 dealer locations in North America, DEVELON is known for its unmatched dedication to service and customer uptime, and durable, reliable products.

DEVELON is fast becoming a global force in construction equipment.

For more information, visit na.develon-ce.com/en.  (This article was provided by DEVELON North America.)

DEVELON photo

Once at the area, the mini-excavators remove old landscaping products or excavate to install the new materials.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 73

WILSON EQUIPMENT COMPANY www.wilsonequipment.com 2180 Old Frankfort Pike, P.O. Box 11520 Lexington, KY 40510 800-432-0913

828 W. Cumberland Gap Pkwy. • Corbin, KY 40701 800-274-9457 2124 Watergap Road • Prestonsburg, KY 41653 800-955-9457

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502-267-4020 • 866-901-2262 2235 Ragu Drive • Owensboro, KY 42303 270-683-2000 • 877-683-2262 6104 Sable Mill Court • Jeffersonville, IN 47130 812-850-6160

HAYDEN-MURPHY EQUIPMENT COMPANY

www.hayden-murphy.com 9301 E. Bloomington Freeway • Minneapolis, MN 55420-3410 952-884-2301 • 800-352-2757 329 2nd Street, Industrial Building 145 • Proctor, MN 55810 952-884-2301 • 800-352-2757

KELBE BROTHERS EQUIPMENT CO.

www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262-781-4970 4621 Dutch Mill Rd. • Madison, WI 53716 608-221-8300 3101 French Rd. • De Pere, WI 54115 920-343-6496

KIRBY-SMITH

www.kirby-smith.com 8320 Ruby Avenue • Kansas City, KS 66111 913-850-6300 12920 Gravois Road • St. Louis, MO 63127 314-729-0125

Equipmentshare

www.equipmentshare.com 8376 I-70 Dr SE • Columbia, MO 65201 573-273-4525

CHRISTOFANO EQUIPMENT CO., INC.

christofano.com 9643 South Harlem Avenue • Chicago Ridge, IL 60415 708-425-6466

Page 74 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MOR RE FOR R YOU O R MON NEY r

Fabick Cat Tech Advances to Regionals in Cat Challenge “Jack has not only demonstrated exceptional skill and expertise over the years with Fabick Cat, but he consistently exemplifies unwavering dedication and integrity.”

*

Mark Hanson Fabick Cat

T

Learn more

Financing available with:

A PROGRAM BY DLL

Iowa - South Dakota - Nebraska 515-967-5656 midwestundergroundsupply.com

Southern Indiana - Kentucky 859-254-6443 wilsonequipment.com

*Terms e on TA A3SH Site Dumper:: 60 months or 4,000 hours Fair Market Value Value lease; 60 months or 4 4,000 000 hours factory warranty. Subject to credit revie ew and approval, and other terms and conditions. All financing is in De Lage Landen Financial Services, Inc.’s sole disscretion. Ta Taxes, freight, setup and delivery charges could incre ease monthly payment.

Wisconsin 800-242-9559 lfgeorge.com

Ohio 614-443-6541 columbusequipment.com

Minnesota 952-890-6000 trenchersplus.com

Kansas – Northwest Missouri K 866-928-4055 vlpco.com

Fabick Cat announced that Jack, lead service technician of the company’s Madison, Wis., location, is heading to Cat’s Global Dealer Technician Challenge in Tucson, Ariz., this December. Jack is one of only 10 technician finalists from the entire western United States and Canada region heading to the next round of competition. He earned his spot at the regionals based on his advanced technical knowledge tested through a written assessment as well as a supplied video submission.

What Is CatÊs Global Dealer Technician Challenge?

Developed by Cat, this challenge was created to celebrate the essential role dealer technicians play in providing an excellent customer service experience. Designed to showcase how skilled technicians are part of a high-tech, high-impact, high-demand career, the competition also aims to raise awareness of the rising demand for technicians in the industry.

“This hands-on, skills-based competition will test the technicians’ agility, resilience and versatility,” said Henry Venneman, Caterpillar global service vice president.

“These trained experts are on the front line of support, working to keep machines and engines up and running to help ensure our customers’ critical projects are completed.”

The Global Dealer Technician Challenge will take place over a series of regional and semifinal competitions around the world.

The Top 10 finalists will have the opportunity to compete in the finals in March 2026 at ConExpo-Con/AGG in Las Vegas.

How Did Fabick CatÊs Technician Get Chance to Compete?

Cat dealers from around the world were given the chance to nominate one technician.

Jack was selected by Fabick Cat based on his recent achievement, earning the title of Fabick Cat’s Top Tech through an internal

Fabick Cat photo

dealership-led Tech Challenge completed in 2023.

“Jack has not only demonstrated exceptional skill and expertise over the years with Fabick Cat, but he consistently exemplifies unwavering dedication and integrity. I can confidently speak for the entire Fabick Cat team when I say that we are all incredibly proud to have Jack representing our organization. He embodies the values we hold dear teamwork, commitment, passion and a relentless pursuit of excellence,” said Mark Hanson, senior vice president of product support of Fabick Cat. “And in this next phase of Cat’s global competition, Jack’s professionalism, impeccable skill and true leadership will shine.”

The Fabick Cat team celebrated Jack’s recent achievement as the dealership’s Top Tech winner. And now he has given his more than 1,300 peers the opportunity to celebrate Fabick Cat and show their support as Jack travels to Tucson later this year. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 75

Most TR T U S TE E D in the world w doesn’tt happen byy accident.

Not only is JCB the t world’s biggest backhoe manufacturer, but we alsso sell as many backhoes around the globe as all other manufacturers combined. It’s not n that big makes us better. Rather R , we’re big because w we’re better. Buy better att JCB.com.

Company Wrench

CSTK JCB

Sievers JCB

www.buckandknobbyjcb.com

www.companywrench.com

www.cstkjcb.com

www.sieversjcb.com

9127 Airport Highway Holland, OH 43528 855-218-2825

4805 Scooby Lane Carroll, OH 43112 740-654-5304

401 Shawnee Avenue Kansas City, KS 66105 913-371-0868 Option 2

406 Old Rt 66 Hamel, IL 62046 618-633-2622

Burns JCB

920 Deneen Avenue Monroe, OH 45050 513-649-8105

JCB of St. Louis

8080 State Rt 16 Hillsboro, IL 62049 217-532-3222

Buck and Knobby JCB

www.burnsjcb.com Covering Northeast Ohio 8155 Roll & Hold Pkwy.

Macedonia, OH 44056 866-459-6713

1330 KY - 151 Frankfort, KY 40601 502-699-2681 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

www.jcbofstl.com 7978 Veterans Pkwy.

St. Peters, MO 63376 636-281-4450

State Route 267 South Greenfield, IL 62044 217-368-2486 14464 Shad Rd Carlinville, IL 62626 217-854-3191 1351 W Jackson St Auburn, IL 62615 217-438-6111

YES Equipment & Services, Inc. www.buyjcb.com 11715 W Silver Spring Road Milwaukee, WI 53225 888-276-4365 7001 Manufacturers Drive Madison, WI 53704 888-276-4365

Page 76 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sales • Service • Parts • Rentals Contact your local authorized Takeuchi dealer:

Diamond Equipment Inc. 1501 Lynch Road • Evansville, IN 47711 800-258-4428 • 812-425-4428 120 Flex Park Drive • Bowling Green, KY 42103 800-489-1061 • 270-781-1061 17035 North IL Hwy 37 • Mt. Vernon, IL 62864 800-388-6396 • 618-242-2273 2000 Harlan Drive • Terre Haute, IN 47802 888-343-4747 • 812-299-4747 www.diamondequipment.com

McCann Industries 543 S. Rohlwing Rd • Addison, IL 60101 630-627-0000 250 E. North Frontage Rd. • Bolingbrook, IL 60440 630-739-7770 23921 S. Northern Illinois Dr. • Channahon, IL 60410 815-467-4480 2350 S. Laflin St. • Chicago, IL 60608 312-942-9200 4701 West 137th Street • Crestwood, IL 60445 708-597-3110 900 Louisiana Street • Merrillville, IN 46410 219-576-7800 1133 Indianapolis Blvd. • Schererville, IN 46375 219-865-6545 1360 N. Rand Rd. • Wauconda, IL 60084 847-526-9444 www.McCannOnline.com

Columbus Equipment Company 2329 Performance Way • Columbus, OH 43207 614-443-6541 12500 Williams Rd. • Perrysburg, OH 43551 419-872-7101 712 Shepherd Ave. • Cincinnati, OH 45215 513-771-3922 3942 Brecksville Rd. • Richfield, OH 44286 330-659-6681 290 Old Steubenville Pike • Cadiz, OH 43907 740-942-8871 7570 New Carlisle Pike • Dayton, OH 45424 937-879-3154 2200 Venture Circle SE • Massillon, OH 44646 330-833-2420 818 Lee St. • Zanesville, OH 43701 740-455-4036 3668 US Route 23 South • Piketon, OH 45661 740-289-3757 www.columbusequipment.com

Kelbe Brothers Equipment Co. 12770 W. Silver Spring Drive • Butler, WI 53007 262-781-4970 4621 Dutch Mill Rd. • Madison, WI 53716 608-221-8300 3101 French Rd. • De Pere, WI 54115 920-343-6496 www.kelbebros.com

Star Equipment Ltd. 1401 2nd Avenue • Des Moines, IA 50314 515-283-2215 • 800-369-2215 2625 W. Airline Hwy. • Waterloo, IA 50703 319-236-6830 • 800-791-9249 2950 6th Street SW • Cedar Rapids, IA 52404 319-365-5139 • 800-728-5139 2100 E. Lincoln Way • Ames, IA 50010 515-233-9500 • 866-856-2312 www.starequip.com

Alta Equipment Company 5105 Loraine Street • Detroit, MI 48208 313-394-1811 56195 Pontiac Trail • New Hudson, MI 48165 248-356-5200 8840 Byron Commerce SW • Byron Center, MI 49315 616-878-7450 3283 S Dort Hwy. • Flint (Burton), MI 48529 810-744-4840 3725 Old 27 S • Gaylord, MI 49735 989-731-9988 7500 E 15 Mile Road • Sterling Heights, MI 48312 586-474-5063 1061 Stepke Court • Traverse City, MI 49685 231-714-6210 613 E Stevenson Road • Ottawa, IL 61350 815-313-2070 www.altaequipment.com

Equipmentshare 8376 I-70 Dr SE • Columbia, MO 65201 573-273-4525 www.equipmentshare.com

Wilson Equipment Company 2180 Old Frankfort Pike • Lexington, KY 40510 859-254-6443 • 800-432-0913 828 W. Cumberland Gap Pkwy • Corbin, KY 40701 606-528-0700 • 800-274-9457 2124 Watergap Road • Prestonsburg, KY 41653 606-874-8036 • 800-955-9457 www.wilsonequipment.com

Brandeis Machinery & Supply Company 17000 Highway 41 N • Evansville, IN 47725 812-425-4491 7310 Venture Lane • Fort Wayne, IN 46818 260-489-4551 8410 Zionsville Road • Indianapolis, IN 46268-1524 317-872-8410 1801 Watterson Trail • Louisville, KY 40299 502-491-4000 160 County Park Road • Paducah, KY 42001 270-444-8390 www.brandeismachinery.com

Luby Equipment Services 2300 Cassens Drive • Fenton, MO 63026 636-343-9970 199 Airport Road • Cape Girardeau, MO 63702 573-334-9937 2999 Mexico Road • O’Fallon, MO 63366 636-332-9970 921 1st Street • Fairmont City, IL 62201 618-397-9971 4375 Camp Butler Road • Springfield, IL 62707 217-744-2233 2625 North 24th St. • Quincy, IL 62305 217-222-5454 www.lubyequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 77

TB350R

WHEN OTHERS BREAK DOWN,

’ IT S STILL

BREAKIN I G IN. If you want w a machine that takes a beating, stands the test of time and gets the job done right, the TB350R excavator’s performance speaks for itself. No mattter the challenge or conditio ons, it simply won’t stop unlesss you haul it way. And probablyy not then, either.

THE MARK OF TOUGHNESS

Kirby-Smith Machinery, Inc. Midwest Equipment and Supply, LLC 1480 S State Hwy T. • Springfield, MO 65802 417-732-5505

ROBUST DE EALER NET WORK

8320 Ruby Avenue • Kansas City, KS 66111 913-850-6300 • 877-851-5729 www.kirby-smith.com

TAKEUCHI FLEET MANAGEMENT

GENUINE PARTS

Road Builders Machinery and Supply Co., Inc. 4115 S. 90th St. • Omaha, NE 68127 402-331-9200 5601 Fletcher Ave. • Lincoln, NE 68507 402-325-0447 4949 Juergen Rd. • Grand Island, NE 68801 308-384-2620 1303 S Chectnut. • Norfolk, NE 68701 402-316-2606 www.roadbuildersmachinery.com

» DIG IN AT TAKE UCHI-US.COM

Page 78 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Due to Demand, Brandt Launches Its High-Output Hydrovac in U.S. Markets In response to the increasing need for hydrovacs that combine full-sized capacity with maneuverability and precision, Brandt Industries has released its hydrovacs to contractors across the United States.

“Operators have expressed their thoughts on the ideal hydrovac — one that will meet their unique needs — and we’ve listened,” said Chris Semple, president, manufactured products at Brandt. “Through our collaborative product design process, Brandt has consulted extensively with contractors and operators to create a machine that sets the standard for the industry.”

Brandt hydrovacs help contractors work more efficiently with maximized legal load weights, quicker debris loading and unloading time, and the capacity to take on larger jobs without load weight concerns, according to the manufacturer. The real-time measurement of water and overall truck weight enables operators to make quick,

Brandt photo

Brandt hydrovacs help contractors work more efficiently with maximized legal load weights, quicker debris loading and unloading time, and the capacity to take on larger jobs without load weight concerns, according to the manufacturer.

informed decisions, which reduces the risk of damage or overweight penalties.

The unit delivers 1,150 gal. of water tank capacity and 11.6 cu. yds. of debris tank capacity, as well as a 28-ft. boom reach with 340-degree rotation.

It also is the quietest hydrovac in its class, according to the manufacturer, a major benefit in urban settings.

For more information, call 866/4BRANDT (866/427-2638) or visit brandt.ca. 

Palfinger Strengthens Partnership at Its Inaugural NA Dealer Conference Palfinger, a leading producer of innovative lifting solutions, recently celebrated its North American success at the company’s inaugural dealer conference.

The event brought together dealers from across Canada, Mexico and the United States to recognize their ongoing partnership and contributions and set a common path for the coming years in the region.

“Our dealers have been the backbone of our North American success. Their deep understanding of local markets and ability to meet specific regional needs make them essential partners in delivering solutions tailored to our cus-

Palfinger photo

Palfinger invited its dealers to its North American headquarters for its inaugural conference, which aimed to foster collaboration, strengthen the network and relationships, and set a common path to success.

tomers’ needs,” said Ismael Daneluz, Palfinger vice president of sales & service for North and Latin America.

“As we work toward our goal of becoming the leader in the North American lifting industry, it is important to take the time to recognize and celebrate their commitment and dedication to the Palfinger brand.”

Palfinger honored its dealers who have demonstrated over 15 years of dedication and exceptional service during a special recognition ceremony.

Looking Ahead At the North American Dealer Conference, Andreas Klauser, CEO of Palfinger AG, reaffirmed the company’s commitment to its dealer network and the North American market.

“Palfinger remains a reliable partner, and we see significant growth potential in this region. Our success is directly tied to the strength of the partnerships we’ve built with our outstanding dealers.”

The North American region contributed 27 percent of Palfinger’s total revenue in the first half of 2024. Over the past two years, the company has launched over 20 new products and models tailored to meet the needs of customers in North America. The dealer conference provided opportunities for collaborative discussions and hands-on product demonstrations.

For more information, visit www.palfinger.com. 

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Bowling Green, KY 270/780-3004 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Evansville, IN 812/425-4491 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 • 800/888-9515 Rochester, MN 507/701-0199 Duluth, MN 218/727-8611 • 800/888-9535 Virginia MN 218/741-9011 • 800/752-4304 Des Moines IA 515/282-0404 • 800/555-1445 Sioux City IA 712/252-0538 • 800/633-9104 Cedar Rapids IA 319/363-9655 • 800/616-6615 East Moline, IL 309-755-7203 • 800-633-9114

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 79

Chooose everythhing

Choose reduced fuel consum mption, high performanc ce and a warra anty you can count on with the HB365LC-3 hybrrid excavator from Komatsu.

•

Up p to 20% reduced fuel consumption*

•

Up to 15% improvement in productivity*

•

New 7-year/15,000-hr transferrable warranty on hybrid components

Disscover more komatsu.com/HB365LC * When compared to conventional PC360LC-11.

ROLAND MACHINERY CO.

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000

www.rolandmachinery.com

816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474

Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966

Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330

Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056

DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400

Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

Page 80 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Now it’s easier than ever to get into a new Manitou Skid Steer Loader or CTL - in stock at a Manitou dealer near you. Low TCO and low financing - plus Manitou exclusives such as the IdealAccess™ fold-up door and the IdealTrax™ automatic track tensioning system. Learn more at Manitou.com

Find out how to save today Star Equipment, Ltd.

starequip.com

1401 2nd Avenue Des Moines, IA 50314 515-283-2215 2950 6th Street SW Cedar Rapids, IA 52404 319-365-5139

Top Notch Equipment

2625 W Airline Hwy. Waterloo, IA 50703 319-236-6830 2100 E Lincoln Way Ames, IA 50010 515-233-9500

Hayden Murphy

14490 Northdale Blvd.

Rogers, MN 55374 763-398-0079

19301 East Bloomington Freeway Minneapolis, MN 55420 800-352-2757

DEALER NAME & INFO GOES HERE topnotchequipmnt.com hayden-murphy.com

17369 USX-10 West Elk River, MN 55330 329 2nd Street, Building 145 Proctor, MN 55810

*Offer subject to change. Available on select Manitou skid/track loader models. See dealer for details.

Wacker Neuson Expanding Wisconsin Facility, U.S. Production AEM photo

AEM’s Manufacturing Express stopped at the Wacker Neuson facility in Menomonee Falls, Wis., to celebrate American-made products.

Wacker Neuson showed off this “Made in America” ST31 tracked skid steer.

WACKER from page 16

Reichetseder also shared that Wacker Neuson is expanding its footprint in Wisconsin. He said the company plans to bring more manufacturing to the United States, including the production of 3- and 4-ton excavators. The company hopes to begin production at the end of next year.

“We’re very proud to expand our manufacturing footprint in the U.S.,” he

said. “One of the major reasons why we are expanding is our growth in product areas, the majority of which are built in the U.S. We’re not only selling what we build, but what we import from our sister companies in Europe. So, ‘Made in America’ is expanding, which is a good thing.”  CEG (All photographs in this article are Copyright 2024 Construction Equipment Guide, except where noted.

All Rights Reserved.)

Wacker Neuson America Corporation’s Gert Reichetseder (L), president and CEO, and Joe Miller, vice president of sales and marketing, welcomed AEM’s Manufacturing Express to its Menomonee Falls, Wis., production facility.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 81

SV40 Mini Excav vator

Compac ct Equipment Built For More

For more than 50 years Yanm a mar compact equipment has beeen helping hardworking people get moree done with machines that are powerful, intelligent, easy to operate, and incredibly efficient.

DISCOVER YANMAR CO OMP PACT EQU UIPMENT AT Y YOUR LOCAL D DEALER: BUCK & KNOBBY EQUIPMENT CO. www.buckandknobby.com 6220 West Sterns Road Building #2 Ottawa Lake, MI 49267 855-213-2825

CONSTRUCTION MACHINERY COMPANY www.cmcky.com

DITCH WITCH OF MINNESOTA & IOWA ditchwitchmnia.com

2911 S English Station Rd Louisville, KY 40299 502-267-4020

12826 Emery Way Shakopee, MN 55379 800-252-5811

6104 Sable Mill Court Jeffersonville, IN 47130 812-850-6160

1320 Frontier Drive Fergus Falls, MN 56537 800-492-4801

2235 Ragu Drive Owensboro, KY 42303 270-683-2000

1520 Blue Sky Blvd.

Huxley, IA 50124 515-685-3521

VERMEER MIDWEST vermeermidwest.com

2801 Beverly Drive Aurora, IL 60502 630-820-3030

621 Spirit Valley E. Drive Chesterfield, MO 63005 636-532-2332

940 Garden Lane Fowlerville, MI 48836 800-336-3889

1801 179th Street N. East Moline, IL 61244 309-751-9540

13402 Britton Park Rd. Fishers, IN 46038 317-842-1040

1098 Franklin Street Marne, MI 49435 616-677-5900

120 East Martin Drive Goodfield, IL 61742 309-965-3300

3310 W. Coliseum Blvd.

Fort Wayne, IN 46808 260-484-2494

2319 Plum Valley Rd. NE Mancelona, MI 49659 231-258-1290

929 McDonough Lake Road Collinsville, IL 62234 618-407-3860

3566 Citadel Circle Newburgh, IN 47630 812-490-4400

VIEW OUR FULL LINE OF EXCA AVATORS, TRACK LOADERS, WHEEL LOADERS AND TRAC CKED CARRIERS AT YA YANMARCE.COM © 2024 Ya Yanmar Compact Equipment North America. YA YANMAR has a corporate policcy of continuous product improvement and development; therefore data, specifications, and warranty are subject to change without any advance notice. There may be differences between the specifications and illustrations contained in this publication and the actual equipment. Equipment components produced by other manufacturers may be shown in photograpphs in this publication for the purpose of illustration only and is not intended as an endorsement of that particular equipment or its suitability. Inspect equipment before using it and be sure it is operating properly. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manual. Before operating a machine, read, understand, and follow all instructions of the manual and on the machine. YA YANMAR disclaims all representations, expresss or implied, or any liability from the use of this publication.

Page 82 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Superior Bowen Handles Site Work for BluHawk Complex Evan Isom, Treasure Advertising photo

Funding for the $1 billion project is through both private sources and Kansas STAR bonds state incentive program, which are Kansas sales tax revenue channeled toward projects anticipating major visitor traffic.

BLUHAWK from page 1

The sports park’s groundbreaking took place in 2022, and construction was completed in two phases. The first phase of the sports complex will include volleyball and pickleball courts, and an indoor turf field for a few different sports such as baseball, football and lacrosse, among others, with a 4,000-seat multipurpose arena.

The venue also boasts one of the area’s only NHL/NCAA regulation-size ice sheets and a 1,500-seat ice rink. The project is made possible through a public-private partnership with the city of Overland Park, state of Kansas and Price Brothers. Florida-based sports facility company SF Network has been hired to manage the facility.

VCC is the general contracting and construction management firm. DSP Builders is the design-build lead and Castillo Architects is the Architect of Record. Superior Bowen handled sitework, with 200,000 sq. ft. of building pad;

more than 80,000 yds. of mass grading; and 39,000 sq. yds. of asphalt paving.

Ironhide Construction, a premier pre-engineered metal building contractor in the Midwest, was awarded to supply and erect BluHawk Sports Complex. Landscape architecture, planning and urban design firm Confluence is in-charge of site development and master planning for the mixed-use development.

AdventHealth Sports Park at Bluhawk has Evan Isom, Treasure Advertising photo been announced as the new home of soccer VCC is the general contracting and construction management firm. DSP club Kansas City Surf; League One Volleyball Builders is the design-build lead and Castillo Architects is the Architect of member KC Power Volleyball; and Silver Record.

Blades Figure Skating Club of Kansas City. No timeline has Evan Isom, Treasure Advertising photo been specified for the second phase of construction for the sports complex or estimated completion of the entire development.  CEG Evan Isom, Treasure Advertising photo

While the total property area covers 277 acres, the sports complex accounts for 420,000 sq. ft.

Ironhide Construction, a premier pre-engineered metal building contractor in the Midwest, was awarded to supply and erect BluHawk Sports Complex.

Pages 83-87

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Winter Warrior: Boss Touts Genesis Liquid Deicing Series When winter strikes, keeping roads, sidewalks and entryways safe becomes a top priority for businesses and municipalities alike.

Snow and ice removal businesses are crucial in maintaining safety during these challenging times. If you’re considering expanding your services or starting a new venture in this industry, look no further than Boss’ Genesis Liquid Deicing Series.

The Genesis Series offers affordability without compromising on quality and efficiency, according to the manufacturer.

Whether you’re a seasoned professional or just starting out, there’s a Genesis model perfectly suited to your needs.

Genesis Brine Buddy: Your Compact Brine Making Solution The Genesis Series Brine Buddy is an ideal starting point for those venturing into liquid deicing for the first time. This compact unit boasts a 900 to 1,000-gallon-perhour capacity, making it perfect for smallscale brine production.

Smart-connected technology lets you conveniently monitor brine salinity from your

sidewalk deicing to the next level. This compact walk-behind spray unit allows for quick-change camlock caps and pre-treatment/post-treatment applications. Its innovative design facilitates the use of 5-gal. cube containers, enabling seamless swapping during operation, reducing downtime and maximizing efficiency.

Boss photo

The Genesis Series offers affordability without compromising on quality and efficiency, according to the manufacturer.

smartphone or tablet. Its stainless steel and poly construction ensure durability, while the air purge system keeps hoses dry after filling trucks, minimizing downtime.

Sidewalk Solutions: Genesis 110E, Sidewalk Slayer, Push Pal The Genesis Series offers specialized solutions for targeted applications, such as sidewalks and entryways. The Genesis 110E features a 110-gal. low-profile tank and a 12V electric pump, making it perfect

for use in UTVs or Toro Workman vehicles.

With its 4 ft. receiver-mount boom, it efficiently covers sidewalks with ease. The Genesis Series Sidewalk Slayer also features dual electric 12V pumps and a 200gal. capacity, making it the ultimate electric sidewalk and Snowrator support unit.

Equipped with a 1 in. fill line and a 50 ft. spring rewind hose reel, it ensures quick and efficient deicing of sidewalks and entryways.

Meanwhile, the Genesis Push Pal takes

Truck-Mounted Sprayers: Genesis 305E, 500E, Power Bundle For larger-scale operations, the Genesis Series offers truck-mounted sprayers in various capacities. The Genesis 305E, with its 305-gal. capacity, serves as an entry-level pickup truck sprayer, providing efficient pretreatment or post-treatment options.

Meanwhile, the Genesis 500E offers a higher capacity of 500 gal., catering to more extensive coverage needs.

The Genesis Power Bundle E allows for customization, connecting to your own tank or tote while offering the same reliability and performance as other models in the series.

For more information, visit info.bossplow.com/elevateyourliquidiq/. 

Blue Diamond Announces New Heavy-Duty Snow Blower Blue Diamond Attachments announced Blue Diamond Attachment photo The Blue Diamond heavy duty snow blower attachment is the launch of an addition to its full line of built to evacuate high volumes of snow quickly and comes in snow removal attachments. Available for skid cutting widths from 62 to 96-in. steer loaders, the Blue Diamond heavy duty snow blower provides excellent performance under both wet and dry snow conditions, fan not only moves high volumes of according to the manufacturer. snow quickly, but also features With an 11-in. chute diameter, the tighter tolerance to the housing new snow blower attachment is built to increasing velocity of the snow evacuate high volumes of snow quickly exiting the chute. and comes in cutting widths from 62 to • A manual pin-style deflector.

96-in.

Blue Diamond snow blowers come Key features of the new Blue Diamond with a manual pin style deflector allowing a heavy-duty snow blower include: true set it and forget approach to blowing snow.

• High tensile steel ribbon flighting.

• Adjustable skid shoes. The heavy-duty snow blowers To deliver even the heaviest wet snow to the awaiting fan, come equipped with adjustable skid shoes extending the life the Blue Diamond snow blower uses machine formed hand of the cutting edge and helping to protect surfaces from damwelded 19-in. augers made with high tensile steel ribbon age commonly associated with snow removal. flighting to provide strength and durability.

• A hydraulic rotator. The hydraulic rotator on the chute • A five-blade fan. A standard 26-in. diameter five blade is ideal for skid steer loaders with cabs or for

contractors/property managers needing to make frequent adjustments.

• Hydraulic line check valves. The valves prevent reverse rotation and allow the motor to overrun after the valve is shut off.

• Various plug features. This feature allows for virtually any skid steer to be used with the heavy-duty snow blower.

“The addition of this heavy-duty snow blower to our line of snow removal attachments could not come at a better time for contractors and municipalities who are looking to update or upgrade their existing fleet,” said Drew Truan, chief operating officer at Blue Diamond Attachments. “Our new snow blower is compatible with most OEMs, it’s built to withstand the harshest of winters, and it is supported by Blue Diamond and our extensive dealer network.”

The new heavy-duty snow blower attachment comes with the Blue Diamond Satisfaction Guarantee and are backed by a 1-year warranty.

For more information, visit www.bluediamondattachments.com. 

Page 84 • October 26, 2024 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

UNMAATCHED PLOWING VERSSAT ATILITY Get a cleaner scrape with the PILE DRIVER XL pusher plow with TRACE™ edge technology.

placement along their 180° arc of travel.

•

Blade Width: 8', 10', 12', 14' & 16'; Expandable to: 14', 16', 18', 20' & 22'

•

Fits: Skid-Steers, Tractors, Wheel Loaders

9552-888-2525

STOCKING DEALERS | THE MIDWEST'S LARGEST NETWORK FOR WESTERN PLOWS & SPREADERRS Aspen Equipment Bloomington, MN 877-888-9215 Aspen Equipment Davenport, IA 563-949-4045 ABC Rentals St Paul, MN 651-451-2264 Country Side Services Ramsey y,, MN 763-441-4943

Dakota Auto Repair & Transmission Apple Valley y,, MN 952-432-2811

North Central Bus & Equipment St Cloud, MN 402-333-0655

L-Z Truck Equipment St Paul, MN 651-488-2571

Northland Farm Systems Owatonna, MN 507-451-3131

Minneapolis Motor Sports Minneapolis, MN 763-634-0244

PODs Tire White Bear Lake, MN 651-426-4640 PPMI Rochesterr,, MN 507-252-8097

Perry's Truck Repair Long Lake, e MN 952-473-4 4898

Rule Tiire LLC Willma arr,, MN 320-23 35-1146

Precision Landscaping & Constructtion Hastings,, MN 651-437-2 2305

Russell's Automotive North Branch, B MN 651-67 74-4000

RecTech Outdoor O Solutions Plato, MN N 952-686-8 8711

Snow Plows P Plus Inc Waverlly y,, MN 763-68 82-5536 St Boni Motor Sports St Bon nifacius, MN 952-44 46-1554

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 26, 2024 • Page 85

Sanco Equipment sancoequipment.com 2317 Consul St. Albert Lea, MN 56007 507-373-4490 12251 B 265th St. Mason City, IA 50401 641-450-7126 630 Schumann Dr. NW Stewartville, MN 55976 507-285-0753 2333 7th Ave. Mankato, MN 56001 507-625-4511

Manke’s Outdoor Equipment mankeoutdoor.com 225 West Rose Street Owatonna, MN 55060 507-451-2327

Tri-State Bobcat tristatebobcat.com 1200 Highway 13 East Burnsville, MN 55337 952-894-0894 71 Minnesota Avenue Little Canada, MN 55117 651-407-3727 588 Outpost Circle Hudson, WI 54016 715-531-0801 2018 US Highway 8 St. Croix Falls, WI 54024 715-557-6010

Bobcat of Brookings bobcatofbrookings.com 803 Main Ave South Brookings, SD 57006 877-338-5544

Page 86 • October 26, 2024 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Available for 2024/2025 Season...

Buyers Offers Straight Blade Plow for Half-Ton Pickup Trucks Buyers Products released a straight blade plow specifically designed for use with most ½-ton and smaller pickup trucks.

Much like the 2022 SnowDogg VMXII, the MXII snow plow has been structurally optimized to weigh less than 450 lbs., which allows the plow to be mounted on lighter trucks like the Ford F-150s, Chevrolet Silverado 1500s and RAM 1500s, as well as many SUVs and smaller trucks.

The SnowDogg MXII is an extension of SnowDogg’s rapidly growing straight blade plow line, which also includes the EXII for one-ton-plus pickup trucks and CMII for Class 4-6 trucks. Designed to move heavy, wet snow in a compact design, the plow features a genuine, 304 stainless-steel blade and a frame built to absorb heavy impacts. The MXII also incorporates popular SnowDogg features like an upgraded RapidLink Attachment System and Floating A-frame and will be available with the new SnowDogg Illuminator LP Low Profile LED Plow Lights.

“Customers loved the improved VMXII mounting system, so we wanted to incorporate that into a straight blade offering for 2024,” said Scott Moorman, director of snow and ice equipment at Buyers Products. “As these vehicles continue to get lighter in the front end, we will continue to look for ways to optimize weight while keeping the strength that the application demands.”

The SnowDogg MXII is in production at Buyers’ facility in northeast Ohio. It is available for the 2024/2025 winter season.

The SnowDogg MXII is available for the 2024/2025 winter season.

For more information, visit www.buyersproducts.com. 

Buyers Products photo

Guidelines Prevent Damage During Snow, Ice Removal Chemical deicers and snowplows are commonly used in winter to eliminate hazardous ice and snow from parking decks and structures.

While deicers are doing their job melting away snow and ice, some may actually be corroding the parking structure’s concrete and reinforcing steel, and some snow removal techniques may actually be doing more damage than good.

Western Specialty Contractors, experts in parking garage restoration and maintenance, offer several tips to minimize unnecessary damage to parking structures during the winter months, and keep drivers safe.

Snow Removal Tips • Clearly mark expansion joints in a way that will be visible to the equipment operator when the deck is covered with snow.

• Establish a snow removal pattern so that the plow blade approaches expansion joints, control joints and tee to tee joints at an angle no greater than 75 degrees.

• Equip snowplow blades and bucket loaders with shoes or rubber guards that prevent direct contact with the deck surface.

• Do not pile snow on the deck surface. Piles of snow can exceed the rated load capacity and cause cracking in the concrete deck surface.

Deicing/Salting Tips Using chemical deicers to control ice and snow buildup is common. However, these chemicals can have a negative effect on concrete and reinforcing steel and should be used sparingly. There are several different types of deicers on the market that can be used, however, only those approved by the American Concrete Institute are recommended.

• Sodium Chloride — (road salt, table salt) This is the most common used salt deicer. It has little effect on concrete, but promotes corrosion in reinforcing steel and other metals. Use of this type of deicer is NOT recommended.

Western Specialty Contractors photo

Western Specialty Contractors, experts in parking garage restoration and maintenance, offer several tips to minimize unnecessary damage to parking structures during the winter months, and keep drivers safe.

• Calcium Chloride — This is a major ingredient in most commercial deicers. It has little effect on concrete, but promotes corrosion in reinforcing steel and other metals. Use of this type of deicer is NOT recommended.

• Ammonium Nitrate or

Ammonium Sulfate — Use of this deicer will lead to serious concrete deterioration due to its direct chemical attack on reinforcing steel. Use of this type of deicer is NOT recommended.

• Calcium Magnesium Acetate (CMA)— The effects of this deicer

are similar to salt, but it requires more time to melt ice. It has no adverse effects on concrete or steel reinforcement. If a deicer is required, a CMA is recommended.

It is important to minimize the amount of deicing chemical applied during the first two years of the concrete being installed.

During this time, the concrete has an increased permeability which can allow the deicing chemicals to migrate into the concrete more rapidly. As concrete ages and cures, it will become less permeable and chemicals will not penetrate as easily.

It is important to remember that the use of deicing chemicals in general are not recommended. The safest way to remove ice and snow is to use a plow. Sand also can be used to increase tire traction on the deck, but be sure to protect the drainage system when washing down the deck after its use.

For more information about parking garage restoration and maintenance, visit www.westernspecialtycontractors.com. 

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 26, 2024 • Page 87

northcentralinc.com 4821 Mustang Circle 25112 22nd Avenue Mounds View, MN 55112 Saint Cloud, MN 56301 877-485-9595 320-251-7252

Page 88 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Equip Expo Features Large Indoor, Outdoor Exhibit Areas EQUIP from page 24

see EQUIP page 96

Allen Engineering, celebrating its 60th anniversary this year, was at Equip Expo. (L-R) are Casey Vaughan, business development manager; Johnna Rogers, marketing manager; and Daniel Allen, sales manager.

Bobcat’s all-electric T7X made its demo debut at the Equip Expo. Test driver Brandon Doyle (L) of CLC Inc. Forest, Va., loved the machine. Logan Worm, design engineer of Bobcat, West Fargo, N.D., said the all-electric track machine was a big hit at the show.

Jordan Hagena (L), product specialist, and Don Garber, national sales manager, both of Diamond Mowers, Sioux Falls, S.D., brought the new mini-skid steer brush cutter that can handle up to 5-in. diameter.

The KAGE Innovation, Osceola, Wis., crew of (L-R) Mike Stephan, owner; Kaydence Favre, marketing coordinator; Kyle Melin, sales; and Joseph Boles, sales, are at Equip Expo with the KAGE Snow Dozer.

Andrew Mailiss (L) of Brown Equipment Company informs attendee Ashray Hanasoge of Ashray Property Services about the Mulch Mule capabilities.

Joe Nolan, Scag Power Equipment, Mayville, Wis., on the new Scag AWL.

Steelwrist representatives at Equip Expo included (L-R) Arturo Santiago, territory manager, southwest; Peter Gaj, vice president of sales; Sanna Larsson, sales logistics manager; Ian Augur, sales associate; Dale Eriksen, SQ manager, demolition; Andrew Perkins, territory manager, Northeast; Donna LaFata, president; Tim Brechlin, parts and service; Axl Pildner, lead operator; Jason Wright, territory manager, Midwest; Joe Galbo, support services; Sam Reedy, territory manager, Northeast; and Anthony LaFata, vice president.

(L-R) are Tyler McLaughlin of KTS Equipment; Bethany Lenahan of Bandit Industries; and Jim McLaughlin of KTS Equipment with the Bandit SG-75 stump grinder.

Mike Smith (L) and Jim Hunt of Premier Attachments debut the mini-skid mount attachment.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 89

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com.

ASSOCIATED GENERAL CONTRACTORS (AGC) AGC Events Calendar: All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place.

• AGC EDGE Lean Construction Education Program, 2nd Edition (https://training.agc.org/course/vlea 241101/) Dates: Tuesday, Nov. 5, 2024 (10:00 AM) – Wednesday, Nov. 13, 2024 (7:00 PM) Online, Virtual Training/Professional Development • Webinar: Construction Change Order Fundamentals (https://www.agc.org/learn/education-training/events/webinarconstruction-change-order-fundamentals) Date: Tuesday, November 5, 2024 (2:00 PM to 3:00 PM) Training/Professional Development • AGC EDGE Safety Management Training Program (https://edge.agc.org/course/vsaf241101/) Dates: Friday, November 8, 2024 (9:00 AM) Friday, November 22, 2024 (5:00 PM) Online, Virtual Training/Professional Development • AGC EDGE Blueprint Reading (https://edge.agc.org/course/blueprint-reading/) Dates: Monday, December 2, 2024 (2:00 PM) Tuesday, December 10, 2024 (5:00 PM) Online, Virtual Training/Professional Development AMERICAN CONCRETE CONVENTION (ACI) ACI Concrete Convention 2024 Dates: November 3 – 6, 2024 Place: Philadelphia Marriott Downtown 1201 Market Street, Philadelphia, PA 19107 Phone: (215) 625-2900 The American Concrete Institute (ACI, formerly National Association of Cement Users or NACU) is a non-profit technical society and standards developing organization. ACI was founded in January 1905 during a convention in Indianapolis. The Institute’s headquarters are currently in Farmington Hills, Michigan, USA. ACI’s mission is “ACI develops and disseminates consensus-based knowledge on concrete and its uses.”

Website: www.concrete.org Current Convention – Fall 2024 ACI is pleased to be hosting its ACI Concrete Convention in-person, in Philadelphia, PA USA, on November 3 – 6, 2024. The convention will have a robust schedule that includes traditional in-person activities. Select programming will also be available on-demand to attendees who choose to participate remotely.

All committee meetings and all social events will be limited to in-person attendees. In-person convention registration includes access to all committee meetings, sessions (live and on-demand), special events, and the exhibit hall.

For more information, contact ACI World Headquarters: 38800 Country Club Drive, Farmington Hills, MI 48331-3439 Phone: (248) 848-3800 DIRT WORLD SUMMIT 2024 Dates: November 4 – 6, 2024 Place: Grand Hyatt 600 East Market Street, San Antonio, TX 78205 Learn, grow and connect with 1,000+other top-notch leaders from around the industry. You will head home with fresh ideas and proven strategies to attract, hire, train and retain great people. Together, we will overcome workforce challenges.

Why Attend this Year’s Summit? Justify Your Trip Network: Build relationships with 1,000+, have impactful decisions, and learn how to overcome your workforce challenges alongside other great civil and infrastructure construction leaders.

Get Inspired: This event has been carefully crafted to not only inspire you to overcome your workforce challenges but equip you with strategies and tactics you can apply.

Enjoy! Each Dirt World Summit sponsor shares a mission and purpose: To help contractors build a better Dirt World. Said, another way, you’ll be in good company.

Learn: The 2024 Event has a diverse lineup of excellent speakers from both inside and outside the industry to share their perspectives, success stories, and tested strategies they’ve used to lead, attract, train and retain top talent.

Agenda Highlights: Off-Site Experiences – Free Pre-Event Breakouts – Morning PT – Dinner and Entertainment – 12+

General Sessions – Three (3) Agenda Tracks – Morning Fellowship Coffee – Exhibit Hall For more information on the Dirt World Summit 2024: Website: https://dirtworld.com/summittalks CONSTRUCTION ASSOCIATION OF MICHIGAN (CAM) One Industry – One Resource – One CAM Meet the Expert: Build Your Business Unlock Success: “Speed Dating” for Business Owners Date: Wednesday, November 6, 2024 Where: Schoolcraft College VISTATECH Center 18600 Haggerty Road, Livonia, MI Wednesday, November 6, 2024 3:00 PM – Networking 4:00 PM – Sessions with Experts 6:00 PM – Dinner Are you a business owner eager to elevate your enterprise to new heights?

Join us for Meet the Expert, a dynamic and innovative event designed to connect you with industry experts and empower you with essential business knowledge. It’s a mini-business conference tailored to provide you with actionable strategies to thrive in today’s competitive market. Engage with a curated lineup of industry experts who will each offer a 15-minute power-packed presentation. Each session is crafted to deliver valuable advice and practical solutions in key areas like cybersecurity, human resources, insurance, tax planning and more.

This is a FREE event for CAM MEMBERS! Not a member? Register for just $30.

For more information, contact: Construction Association of Michigan (CAM) 43636 Woodward Avenue, Bloomfield Hills, MI 48302 Phone: 248/972-1000 ASSOCIATED GENERAL CONTRACTORS OF AMERICA (AGC) Construction Financial Management Conference AGC/CFMA Construction Financial Management Conference Date: November 6 – 8, 2024 Place: Park MGM 3770 Las Vegas Boulevard S. Las Vegas, NV 89109 What is the Construction Financial Management Conference?

The Construction Financial Management Conference is jointly sponsored by the Associated General Contractors of America (AGC) and the Construction Financial Management Association (CFMA). This Conference is specifically for financial professionals in the Construction Industry to dialogue and address situations unique to the industry.

Topics Covered: This Conference is filled with the latest industry topics, including: Construction Market Trends - Contract Compliance Construction Taxes - Accounting and Auditing - Cyber Risk Financial Fraud - ESG – Environmental, Social, Governance – Financial Markets and Political Update – Mental Health – Diversity & Inclusion Who Attends?

At this Conference, you will see a variety of decision-makers from the construction industry: Construction Business Owners – CFOs – Controllers – Treasurers – CPAs – Auditors – Consultants – Bankers For more information, contact: The Associated General Contractors of America (AGC) 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201 Phone: (703) 548-3118 Fax: (703) 842-8817 Email: info@agc.org WOMEN OF ASPHALT Women of Asphalt Executive Seminar Sponsored by ASTEC Date: November 7 – 8, 2024 Place: ASTEC Headquarters 1725 Shepherd Rd, Chattanooga, TN 37421 Women of Asphalt Lead & Inspire Join us for the Women of Asphalt Executive Seminar, sponsored by ASTEC on November 7 – 8, 2024, at the ASTEC Headquarters in Chattanooga, TN. This exclusive event will feature keynote presentations from industry leaders, technical discussions, a tour of the ASTEC ROADTEC FACILITY and opportunities to network with fellow professionals.

This exclusive event features: . Keynote presentations from industry leaders . Technical Discussions on the latest innovations . Tour of the ASTEC ROADTEC Facility . Networking with top professionals in the industry Registration is FREE and available to the first 50 women (limit 3 attendees per company).

Attendees are responsible for their travel expenses.

Don’t miss this opportunity to learn, connect and grow.

Contact Information: Women of Asphalt, 2233 Park Avenue, Suite 200U, Orange Park, FL 32073 Phone: 407/653-6777 Email: info@womenofasphalt.org

Events are subject to change, check websites for updates

The Easy Way To Advertise Your Equipment

Run In Two Consecutive Issues – Black & White $140 • Color $205

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices!

Call Company Wrench for Sizes & Pricing 21-22 NS Call 866-294-6103

2017 & 2018 Volvo 78” Volvo DD120C 8-amplitude rollers.. ...........................................................................$38-$42,000 22 JM 800-283-1336

1996 Manitowoc 888, SN: 8881038, 230 ton crawler crane, Series 2 Counterweights, LSI/LMI system w wireless load links, Self-Erect option, Luffing jib & Aux drum Prepped, AC & Heated Cab, Request Boom & Jib Combo, Cleveland, Ohio..............................CALL Contact Sales Dept 440-439-4749 sales@craneandshovel.net 22-23 NS

2017 GRT 880, SN:235924, 4,855 HRS, Cummins Tier 4 Final, 134.7’ 4 section FPB, 33-56’ Bi-fold swingaway jib, CCS operating system, Full Outrigger monitoring system, Cleveland, Ohio ..............................................................CALL Contact Sales Dept 440-439-4749 22-23 NS sales@craneandshovel.net

(2) 2020 Superior Brooms DT74J, low hours .$57,000/each 2017 Hamm HD-14 Roller, 1200 hours ...................$33,400 800-283-1336 800-283-1336 22 JM 22 JM

2016 CAT D6K2-LGP, S/N: 2110, New Undercarriage at 2,225 hrs, 4690 Hours, 6-Way Blade...................................$125,000 Contact Skip Henson 219-696-5680 • shenson@ronsonequipment.com 22 JM

2018 HYUNDAI HX160L, Stock# 836, 2295 Hrs, Quick Coupler, 48” Bucket.....................................................$91,000 22 JM Call George 219-696-8911

2022 Case SR160, S/N JAFSR160VMM403649, 65 Hours, Cab/Air/Heat, Manual Coupler, 60" GP Bucket...........$38,900 Call Mike 630-492-9115 22 JM

2020 Kubota RTV X1140, S/N 34063, 1015 Hours, Cab Unit with soft doors ..........................................................$10,900 Call Mike 630-492-9115 22 JM

Page 90 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors!

Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (WORLDWIDE): HITACHI WANTED: CATERPILLAR D11 / D11T ZW180-6 WHEEL LOADERS. CD CRAWLER DOZER; GOOD WORKEMAIL: SALMAN.MAYI@GMAIL.COM ING CONDITION. –––––––––––––––––––––––––––––––– EMAIL: HYESUNG_KIM@NAVER.COM; WANTED (US): CATERPILLAR 140G PHONE: 822 425 6601 MOTOR GRADER - 8000 OR UP SERIAL –––––––––––––––––––––––––––––––– MODEL. WANTED (TX): CATERPILLAR 950B WHEEL LOADER; LOOKING FOR A CAT EMAIL: ROYALMACHINERYTRADERS@GMAIL.COM 950B OR E, OR ANY MECHANICAL PHONE: 0-33-6059-8261 WHEEL LOADERS FOR SALE –––––––––––––––––––––––––––––––– EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM; WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. PHONE: 281-694-5478 EMAIL: KARLOSZAC15@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (US): TAKEUCHI SKID STEER PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– LOADERS, ALL MODELS. TL150, WANTED (OR): KOMATSU 3.0 YARD MUSTANG MTL 25TH, GEHL CTL80 BUCKETS - NEED A 2015 KOMATSU TURBO 2 OR CYCLONE AIR FILTER WA270 LOADER BUCKET. QUICK ASSEMBLY AND ACCESSORIES, RELEASE STYLE. PLUMBING FROM FILTER AND EMAIL: EXTERNAL SPINNER. EMAIL: BRANDONDANLEY86@GMAIL.COM; AMATZEN@BROOKFIELDR3.ORG; PHONE: 1-541-213-4973 PHONE: 660-734-0452 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 550K LGP WANTED (NC): JCB 214E BACKHOE CRAWLER DOZER - WANT TO BUY LOADER - HEAVY ROOT RAKE TO BULLDOZER 550KLGP OT 650KLGP REPLACE FRONT BUCKET ON 214E 2021 AND UP. LOW HOURS (UNDER BACKHOE LOADER 600), ENC CAB, WINCH. UNDER $100,000 EMAIL: NORWOOD1310@GMAIL.COM; EMAIL: PHONE: 910-289-1310 JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– PHONE: 450-346-8975 WANTED (NC): JCB 214E BACKHOE –––––––––––––––––––––––––––––––– LOADER – NEED HEAVY ROOT RAKE WANTED (US): STERLING DUMP TO REPLACE FRONT BUCKET ON 214E TRUCKS, ALL MODELS; LOOKING FOR BACKHOE LOADER. A ROTARY HI RAIL DUMP TRUCK, PRE EMAIL: NORWOOD1310@GMAIL.COM; EMISSIONS, ANY MAKE/MODEL. PHONE: 910-289-1310 EMAIL: –––––––––––––––––––––––––––––––– MURPHYCONTRACTORS@YAHOO.COM ; PHONE: 860-324-9693 WANTED (NC): JOHN DEERE 12 INCH –––––––––––––––––––––––––––––––– BUCKETS – LOOKING FOR A 12” WANTED (OH): FREIGHTLINER DUMP BUCKET FOR A JOHN DEERE 310 G TRUCKS, ALL MODELS. LOOKING FOR BACKHOE. A ROTARY HI-RAIL DUMP TRUCK, PRE EMAIL: EMMISSIONS, ANY MAKE/MODEL. DANDHWORRELL@CHARTER.NET EMAIL: –––––––––––––––––––––––––––––––– MURPHYCONTRACTORS@YAHOO.COM WANTED (TX): CATERPILLAR PHONE: 860-324-9693 EXCAVATORS, ALL MODELS. EMAIL: MMERRILL@WHEELERCAT.COM –––––––––––––––––––––––––––––––– WANTED (US): CUMMINS GENERATORS, PHONE: 801-201-8655 ALL MODELS. LARGE PORTABLE OR –––––––––––––––––––––––––––––––– STATIONARY GENERATORS IN ANY WANTED (US): CASE 650L LGP CONDITION — CAT, CUMMINS, CRAWLER DOZER – LOOKING FOR DETROIT, MTU, PERKINS, VOLVO CASE 650LLGP BULLDOZER WITH OR (DIESEL OR NATURAL GAS) CAN WITHOUT ENC. CAB, MODEL YEAR REMOVE IF NEEDED. 2010 – 2017, LESS THAN 900 HOURS EMAIL: MICHSURPLUS@GMAIL.COM; TRUE HOURS METER AND FRAME, PHONE: 201-679-6437 UNDER $35000 US. –––––––––––––––––––––––––––––––– EMAIL: WANTED (WORLDWIDE): KOMATSU JEANMAURICEBOUTIN@VIDEOTRON.CA WHEEL LOADERS, MODELS WA 600-3 PHONE: 450-346-8975.

AND WA 600-6 2014 OR UP MODELS. –––––––––––––––––––––––––––––––– EMAIL: IUKANDCO@YAHOO.COM; WANTED (US): CASE WHEEL LOADPHONE: +923331234598 ERS, ALL MODELS - 521D 521E 521F –––––––––––––––––––––––––––––––– 621D 621E 621F 721D 721E 721F. WANTED (WORLDWIDE): CATERPILLAR EMAIL: MOTOR GRADERS, MODEL FRANKHORAN@GTMIDATLANTIC.COM; 12G,14G,14OG,14OH ETC. RUNNING OR PHONE: 800-654-USED NON RUNNING UNITS. –––––––––––––––––––––––––––––––– EMAIL: IUKANDCO@GMAIL.COM; WANTED (US): JOHN DEERE 495D PHONE: +92-333-1234598 EXCAVATORS; WANT TO BUY JOHN –––––––––––––––––––––––––––––––– DEERE WHEELED EXCAVATOR 495D & WANTED (PA): CAT OR CASE 595D. BACKHOE LOADERS, ANY CONDITION. EMAIL: ILYAS.MTCPK@GMAIL.COM; EMAIL: DEALER.SALES11@GMAIL.COM; PHONE: 346-484-0369 PHONE: 717-621-3470 –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILWANTED (IL): CATERPILLAR MODEL LAR WHEEL LOADERS, ALL MODELS 416D BACKHOE LOADERS. LOOKING FOR ANY BACKHOES, CAT, CASE, JD – NEED TO PURCHASE FOR OWN STOCK CATERPILLAR WHEEL LOADERS (916, IN WORKING CONDITION OR WITH ISSUES. IF YOU HAVE SOMETHING YOU 926, 936E, 950B, 950E, 950H, 966E, 966F, 966H, 970F & 980F. WANT TO GET RID OF IT, SEND ME. EMAIL: ROYALMACHINERYTRADERS@ EMAIL: JANDWINS@GMAIL.COM; GMAIL.COM; PHONE: 657-549-3619 PHONE: +923360598261 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED (TX): INGERSOLL RAND WANTED (US): KAWASAKI WHEEL 185CWJD AIR COMPRESSOR, NEW. LOADERS 85ZV , 90ZV , 90ZIV , 95ZV. EMAIL: DAVID@FELDERWW.COM; ALSO SEARCHING FOR KOMATSU PHONE: 713-542-0458 WA470-3 , WA600-3 , WA600-6. RUN–––––––––––––––––––––––––––––––– NING OR NON-RUNNING CONDITION. EMAIL: ALADNANENT@GMAIL.COM; WANTED (US): HATZ ENGINE - E71 PHONE: +923445757577 HATZ DIESEL ENGINE, RUNNING OR –––––––––––––––––––––––––––––––– PARTS EMAIL: AILEENLOZZI@ME.COM; WANTED (NC); CLARK ECX 25 PHONE: 717-806-8969 FORKLIFT. –––––––––––––––––––––––––––––––– EMAIL: JBSSERVICES37@GMAIL.COM WANTED (US): KAWASAKI WHEEL –––––––––––––––––––––––––––––––– LOADERS 80Z, 85Z, 90Z WANTED (IL): CASE 580M III BACKHOE EMAIL: LOADERS; LOOKING FOR CAT, CASE EQUIPMENTDESTINY@GMAIL.COM; AND JOHN DEERE BACKHOE PHONE: +1 346 484 0369 PARTS/SALVAGE MACHINES. –––––––––––––––––––––––––––––––– RUNNERS AND NON RUNNERS, WANTED (WORLDWIDE): VOLVO ANY CONDITION. WHEEL LOADERS - LOOKING TO BUY EMAIL: JANDWINS@GMAIL.COM; VOLVO L320 , L330 OR L350F, YEAR PHONE: 618-838-0841 ABOVE 2013. MUST BE RUNNER/NON–––––––––––––––––––––––––––––––– RUNNER. WANTED (AL): KOMATSU 12 INCH EMAIL: ALADNANENT@GMAIL.COM; BUCKET, PC35 PHONE: +923445757577 EMAIL: JSGODSEY78@GMAIL.COM; –––––––––––––––––––––––––––––––– PHONE: 205-485-4605 WANTED (WORLDWIDE): ENGINE FOR –––––––––––––––––––––––––––––––– A TRACK-TYPE TRACTOR - CAT D6R WANTED (US): ALL MODELS DITCH XL SERIES II - ENGINE C9 - SERIAL #: WITCH VACUUM/EXCAVATION 4ZF10784 EQUIPMENT EMAIL: MILANZOLL@INCOMERH.COM EMAIL: –––––––––––––––––––––––––––––––– BILL@DITCHWITCHNEWMEXICO.COM WANTED (US): CAT 983-B; KOEHRING –––––––––––––––––––––––––––––––– 1066, RUNNING OR NOT; GRADALL ON WANTED (US): MANUFACTURER: TRACKS, RUNNING OR NOT; DRESSER JCB 540-170 TELEHANDLER, 2016 OR 250-E CRAWLER LOADER. NEWER. CALL 267-738-5984 EMAIL: –––––––––––––––––––––––––––––––– NORTHHEAVYEQUIPMENTS@GMAIL.COM WANTED (WORLDWIDE): DRESSER PHONE: 281-694-5478 125E CRAWLER DOZERS - LOOKING –––––––––––––––––––––––––––––––– FOR A COMPLETE BOSCH VA PUMP WANTED (US): CATERPILLAR 140G OR HEAD AND ROTOR. MOTOR GRADERS - NEED TO BUY CAT EMAIL: MOTOR GRADER 140G/H, 14G,14M. CRAIGBERENS944@GMAIL.COM ALSO LOOKING FOR A KOMATSU –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE BROOMS WHEEL LOADER WA-600 AND WA-900.

EMAIL: IKCEQUIPMENTS@GMAIL.COM / SWEEPERS, ALL MODELS. –––––––––––––––––––––––––––––––– MID-SIZED JOHN DEERE OR HYUNDAI WANTED (US): MISCELLANEOUS EXCAVATOR PLUMBED AND WITH CATERPILLAR ATTACHMENTS. CONCRETE PULVERIZER. EMAIL: NEWYORKCWS@YAHOO.COM; LOOKING FOR RELIABLE IT COUPLER ATTACHMENTS AND JOHN DEERE PHONE: 973-956-8854 644K FORKS (JRB COUPLER) TO –––––––––––––––––––––––––––––––– ENHANCE OUR CONSTRUCTION OPERWANTED (PA): NEW HOLLAND ATIONS. ITEMS REQUIRED TO BE IN ATTACHMENTS - 7614 LOADER GOOD, WELL-MAINTAINED CONDITION. ATTACHMENT FOR NEW HOLLAND THE MOST DESIRED ATTACHMENTS TRACTOR. ARE SIDE DUMP BUCKETS (LEFT AND EMAIL: KEVCOOKENTERPRISES@GMAIL.COM; RIGHT), BROOM ATTACHMENT, EXTENDABLE BOOM ATTACHMENT PHONE: 814-386-5541 FORKS. –––––––––––––––––––––––––––––––– PHONE: 484-781-2958 WANTED (FL): COTTRELL TRAILERS, EMAIL: ALL MODELS. EMAIL: WILFREORLANDO@GMAIL.COM JWALSH@JAMESTOHARAINC.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED (MA): CATERPILLAR 308E2CR WANTED (US): CLARK M371 SKID STEER LOADER QC EXCAVATOR. EMAIL: KKNOPE@DEFELICECORP.COM EMAIL:ANDYGRANGER30@GMAIL.COM –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR D10N CRAWLER DOZER. PLS PRICE FOB OR CIF ALEXANDRIA PORT EGYPT. EMAIL: ELEKTESADCO@YAHOO.COM; PHONE: 00201005311220 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 336 EXCAVATOR - MUST HAVE A HYDRAULIC QUICK COUPLER, AUXILIARY HYDRAULICS AND GPS EQUIPPED. UNIT SHOULD HAVE BETWEEN 4-6000 HOURS. EMAIL: AARONA@BLACKSTARACA.COM PHONE: 737-587-1936 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR OFFHIGHWAY TRUCKS - CAT MODELS 777C, 777D, 777F, 777G. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING FOR 980K-M / 924 K-M / 416 420 430 C-D-E-F / 953 963 C-D-K / 580 590 MN EMAIL: FEEDBACK@GCESEQUIPMENT.COM PHONE: 657-456-2544 –––––––––––––––––––––––––––––––– WANTED (IL): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING FOR CAT - CASE 980K-M /924 K-M /416 420 430 C-D-E-F /953 963 C-D-K / 580 590 M-N. EMAIL: JANDWINS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU WA-600, WA-500 AND WA-900 WHEEL LOADERS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (IL): A CUMMINS 5.9 TURBO CHARGED ENGINE FOR A CASE 1155E LOADER. EMAIL: KUBERSKIEXC@CHARTER.NET –––––––––––––––––––––––––––––––– WANTED (TX): NEED CAT 988 USED WHEEL LOADER. IF AVAILABLE PLEASE CONTACT ASAP. EMAIL: NORTHHEAVYEQUIPMENTS@ GMAIL.COM; PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (TX): ALL MODELS EAGLE CRUSHERS / PULVERIZERS / SHEARS. ISO PORTABLE, PREFERABLY CLOSED CIRCUIT, IMPACT CRUSHERS. ALSO INTERESTED IN PORTABLE SCREENS EMAIL: GIVEBUYSELLTRADE@GMAIL.COM; PHONE: 512-822-8818 –––––––––––––––––––––––––––––––– WANTED: KOMATSU WA600-6 WHEEL LOADER & CAT 988. IF AVAILABLE, PLEASE LET ME KNOW. THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OK): CATERPILLAR D5N CRAWLER DOZER. EMAIL: JUNK4@ACEINVESTMENTS.COM; PHONE: 405-627-6246 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR MODEL 815 SOIL COMPACTOR. EMAIL: ANDREWL@BLACKSTARACA.COM; PHONE: 312-898-5355 –––––––––––––––––––––––––––––––– WANTED (IN): HYSTER H80FT FORKS EMAIL: YADAV.JYOTI178@GMAIL.COM PHONE: 09500208661 –––––––––––––––––––––––––––––––– WANTED (WA): BOMAG BW 172 PADFOOT COMPACTORS | LOOKING FOR PARTS, SPECIFICALLY DRIVE TRAIN, OR WHOLE MACHINE TO USE FOR PARTS. EMAIL: DYLAN@COLF.COM PHONE: 360-798-5847 –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR MODEL 14H MOTOR GRADER. EMAIL: NORTHHEAVYEQUIPMENTS@ GMAIL.COM; PHONE: 2816945478 –––––––––––––––––––––––––––––––– WANTED (WI): JOHN DEERE 200C EXCAVATOR - WANT TO BUY 5000065000 POUND EXCAVATOR WITH HYDRAULIC THUMB UNDER 6000 HOURS, UNDER $90K, ANY MAKE. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 0092-333-123-4598 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU PC3000 EXCAVATOR – LOOKING FOR A KOMATSU PC3000 ENGINE. EMAIL: EQUIPMENTDESTINY@GMAIL.COM; PHONE: 832-244-1897 –––––––––––––––––––––––––––––––– WANTED (US): WANTED FOR A JCB RUBBER TIRE BACKHOE LOADER 214 – A QUICK DISCONNECT DETACHABLE ADAPTOR FOR A SET OF FORKS. CAN NEED REPAIR. EMAIL DEANDRS@VERIZON.NET OR CALL 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS ALLMAND BACKHOE LOADERS. EMAIL: SCRIBEDM@ZOOMINTERNET.NET –––––––––––––––––––––––––––––––– WANTED (US): VOLVO EC480DL EXCAVATOR EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (OK): INTERNATIONAL H100C WHEEL LOADER - I HAVE A 1978 GREEN ARMY HUFF MODEL#H100C WHEEL LOADER VIN#IH2073. LOOKING FOR A COMPLETE 6 CYLINDER TURBO DIESEL INTERNATIONAL ENGINE DT-466.

EMAIL: CELMORE@RONSPBS.COM PHONE: 918-385-1623 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D BACKHOE LOADERS – WE ARE LOOKING TO BUY FOR THE FOLLOWING BACKHOES: CASE (580K, L, M, SK, SL) CAT (416, 420 C/D/E/F), DEERE (310E, G, SE) AND JCB (214 SERIES 3).

EMAIL: EQUIPMENTDESTINY@GMAIL.COM; PHONE: +1 832-244-1897 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 91

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Online Oct. 24 – Nov. 7, 2024 For: Owner Retirement: Fabrication Shop & Construction Equipment • Online Oct. 25 – Nov. 8, 2024 For: Dumps trucks, Sweepers, Fuel Tanks & more • Cairo, NY Sat., October 26, 2024 For: Large Job Completion, Concrete Contractor • Manchester, NH Sat., November 2, 2024 For: Late Model Construction Equipment & more • Houston, TX Wed., November 6, 2024 For: Late Model Construction Rental Returns • Niagara Falls, NY Sat., November 9, 2024 For: Large Rental Returns Construction & Agricultural

Coming Auctions To view our complete list of upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • Online Ends October 30, 2024 For: Clinton County Transit Surplus Auction AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401 • Online Oct. 17 - Nov.1, 2024 For: Online Auctions Closing Daily!

BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Online Sat., November 9, 2024 For: Sacramento, CA Monthly Public Auction

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

• Abilene, TX October 29, 2024

• Online October 29, 2024

• Houston, TX November 5 - 7, 2024

• Online November 5, 2024

• Orlando, FL November 7 - 8, 2024 • Tipton, CA November 14, 2024 ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061

BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • Online October 30, 2024 • Online November 6, 2024

• Online May 1 – December 31, 2024 For: Vehicles, Equipment & Government Auctions

BRIGHT STAR AUCTIONS www.brightstarauctions.com 574-825-0704

• Online Ends October 28, 2024 For: Elizaville, NY Vehicle & Equipment Auction

• Mio, MI Fri., November 8, 2024 For: GYM’s Sawmill Liquidation Auction

• Online Ends October 30, 2024 For: Beacon CSD Surplus Vehicle Auction

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• Online Ends October 30, 2024 For: Beacon CSD Surplus Vehicle Auction

• Washington, IN Tues., October 29, 2024 For: Fall INDOT Surplus Auction

• Online Ends October 30, 2024 For: Clinton County Sheriff Dept.

Surplus Auction

• Union Grove, WI Thurs., November 7, 2024 For: Fall Stateline Equipment Auction

FREIJE & FREIJE AUCTIONEERS www.freijeauctioneers.com 317-539-2895 • Indianapolis, IN Sat., October 26, 2024 For: Hanna’s Wrecker & Recycling Fleet Realignment Auction • Decatur, IL Sat., November 9, 2024 For: Lugari Truck & Auto Repair Retirement Auction

• Online Wed., November 13, 2024 For: Live Streaming Auction J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL Thurs., October 24, 2024 For: Alabama D.O.T. Auction

HAMILTON-MARING AUCTION GROUP www.hmauction.com 507-584-0133

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

• Online October 19 - 29, 2024 For: Complete Dispersal H&M Plumbing & Heating Auction

• Online Day 1 Oct. 30 – Nov. 6, 2024 For: Pyramid Mountain Lumber Public Auction

HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012 • Online October 28 - 29, 2024 For: Fall Nitke Contractor Auction • Online Mon., November 4, 2024 For: Logging, Trucking & Heavy Equipment Auction HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Virtual Live Broadcast Wed., October 30, 2024 For: Mueller’s Scrap & Metal Division, Inc Equipment Auction • Virtual Live Broadcast November 6 - 13, 2024 For: East Coast Hoist, Inc. Complete Liquidation Auction I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Online Wed., December 4, 2024 For: Heavy Equipment, Truck & Trailer Auction J. STOUT AUCTIONS www.jstoutauction.com 888-230-8840

• Online Day 2 Oct. 31 – Nov. 7, 2024 For: Pyramid Mountain Lumber Public Auction • Online Day 3 November 1 - 8, 2024 For: Pyramid Mountain Lumber Public Auction JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Online Tues., October 29, 2024 For: Virtual Powerline & Utility Auction • Fergus Falls, MN Sat., November 2, 2024 For: 2nd Annual Northern MN Construction & Ag Consignment Auction • Kissimmee, FL Wed., November 6, 2024 For: Fall Florida Construction Auction • Loudon, NH Sat., November 9, 2024 For: Heavy Construction Equipment, Trucks, Trailers & more • Pelzer, SC Sat., November 9, 2024 For: Southeast Automobile Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Online Tues., October 29, 2024 For: Kansas Department of Transportation Auction • Online Wed., October 30, 2024 For: Vehicles & Equipment Auction • Online Thurs., October 31, 2024 For: Construction Equipment Auction • Online Tues., November 5, 2024 For: Government Auction • Online Wed., November 6, 2024 For: Ag Equipment Auction • Online Thurs., November 7, 2024 For: Truck & Trailer Auction RES AUCTION SERVICES www.RES.bid 833-SOLD-RES • Wooster, OH Sat., October 26, 2024 For: Super Saturday Auction RTi AUCTIONS www.rtiauctions.com 585-243-1563 • Online October 25 - 30, 2024 For: CNY Farm Supply Fall Inventory Reduction NetAuction SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., October 26, 2024 For: 15th Annual Fall Sale SHETRON AUCTION & EQUIPMENT LLC www.shetronequipment.com 717-532-8828 • Shippensburg, PA Wed., October 30, 2024 For: Construction & Farm Equipment Auction SOLD AUCTION COMPANY www.soldauctionco.com 404-725-2267 • Commerce, GA Sat., November 16, 2024 For: Construction & Farm Equipment Auction SULLIVAN AUCTIONEERS a BigIron Company www.sullivanauctioneers.com 844-847-2161 • Online Tues., October 29, 2024 For: Michael Lombard Auction

Page 92 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

USDOT Unveils National V2X Deployment Strategy COMMUNICATION from page 1

In August, the DOT unveiled its National V2X Deployment Plan, which the agency said sets the launch vision, goals and milestones for the next 12 years.

“Excitement is building around V2X,” said Egan Smith, managing director of the Intelligent Transportation Systems (ITS) joint program office.

“As deployments become more widespread, we are going to see the safety benefits multiply,” he told DOT’s Public Highways magazine.

With the launch, DOT is calling on public agencies and private-sector stakeholders to take action on 12 specific interoperable deployments, all by 2036.

“Interoperability is the key,” Govind Vadakpat, the ITS JPO program manager of smart infrastructure told Public Highways.

“Vehicles, devices and infrastructure all must … communicate … seamlessly across jurisdictional boundaries for V2X to reach its full potential.”

The FHWA has stepped up to advance interoperability. The agency is providing technical assistance and resources to V2X deployers, for one thing. It’s also working to resolve regulatory uncertainty, establishing a V2X peer group and identifying proven V2X applications.

Finally, FHWA is investing in research, development and deployment of V2X technology, according to the article.

More than 800 comments prove stakeholders support the draft deployment plan, many enthusiastic about its key features.

Citizens Band radio technology, first popular in the 1950s, continues to be a vital communication tool in the trucking and heavy transport sector.

It is an early example of “a ubiquitous communication system that was, and is, used both by citizens at home and … in any type of vehicle or boat,” said hackaday.com. “For truckers in particular it provides a means to obtain constant updates on road conditions [and for] truck-to-truck communications should the need arise.”

Car drivers, who connect and inform via smartphone technology, still want access to a communication network for crucial information, said hackaday. Cruise control and collision avoidance systems (CAS) monitor activity around the vehicle as well as potential traffic rule violations.

“The number and types of CAS and other forms of advanced driver-assistance systems [ADAS] in modern cars keep increasing,” said the publication.

Everything “from LIDAR and cameras to radar systems” prevent collisions, keep the car in the current lane and detect braking cars ahead. These systems also integrate data obtained via a data link on upcoming traffic

lights and other notable features long before they become visible.

“It raises the question of whether … V2X … would do more than standardize and expand upon much of the technology that is already out and about on the roads today,” said hackaday.com.

Titled Saving Lives with Connectivity, the deployment plan will guide DOT’s V2X implantation and the agency’s goal of zero highway fatalities. The plan was released in draft form about a year ago, detailing the technology that would enable vehicles and wireless devices to communicate.

“These technologies can enable a more safe, secure and efficient transportation system while maintaining privacy and consumer protection,” said DOT. The agency also said that the technologies will contribute to the Safe System Approach adopted by the USDOT’s National Roadway Safety Strategy. The Safe System Approach is a comprehensive plan launched in January 2022 to address the crisis of roadway deaths.

The national plan “has the power to save lives and transform the way we travel,” said Pete Buttigieg, secretary of transportation.

“The department recognizes the potential safety benefits of V2X, and this plan will move us closer to nationwide adoption of this technology.”

Robert C. Hampshire, principal deputy assistant for research, said the plan was drafted in collaboration with pubic and private partnerships.

“The plan will accelerate investment, research and deployment in V2X ‘market certainty,’” he said.

And, Shailen Bhatt, FHWA administrator, said the plan provides a framework for the acceleration of V2X deployment. Along with the deployment, FHWA announced nearly $60 million in grants to three entities to promote deployment.

The goal is to advance V2X communication, ensuring connected technologies communicate securely without interference across a variety of devices and platforms.

The launch represents a “significant milestone,” said Laura Chace, Intelligent Transportation Society of America (ITS) president and CEO. “USDOT’s enthusiastic support for V2X adoption provides clear guidance to stakeholders for continued V2X development, investment and deployment.”

In June, DOT awarded $60 million in grants in Arizona, Texas and Utah to advance connected and interoperable vehicle technologies. The awards are intended to serve as national models to accelerate and spur new deployments of V2X technologies.

Connected vehicle technology like V2X “has potential to make roads safer and save lives,” said U.S. Secretary of Transportation

Pete Buttigieg in announcing the awards.

“The grants we’re announcing today are helping accelerate the development and adoption of potentially life-saving V2X technology nationwide.”

“The funding … will help accelerate the technology so that we can deploy it on a national scale,” said Bhatt.

That in turn means the agency can “provide new tools to reduce deaths on our nation’s roads and highways,” he added.

In Arizona, the Maricopa County DOT will receive $19.6 million for largescale deployment of V2X technologies.

Arizona’s plan is to connect 750 physical and virtual roadside units to an estimated 400 vehicle onboard units targeting transit, emergency and freight fleets via emergency vehicle preemption, vulnerable road user (VRU) detection, transit signal priority and freight signal priority applications.

Those applications will be in Phoenix, Tolleson, Avondale and unincorporated Maricopa County, as well as along ADOT’s U.S. 60.

Texas A&M Transportation Institute will receive $19.2 million to deploy in Houston, College Station and corridors connecting the two cities.

The project serves to enhance safety, efficiency and overall mobility for VRU at signalized intersections and traffic-navigating emergency responders It also serves transit operators seeking efficient routes, workers operating within construction zones and everyday motorists.

The Utah DOT will receive $20 million toward deployment sites in Utah, Colorado and Wyoming. Each state represents a broad variety of population densities, demographics, jurisdictions, topography and transportation facilities.

All of Utah, I-80 through Wyoming, and major portions of Colorado including Denver, I-70 to the Utah border, and I-25 through Colorado are included.

The applications focus on safety, mobility and environment and support the ability to demonstrate measurable impact. They address critical needs including connected intersection, weather impact, curve speed warning, traveler information, VRU and other safety technologies.

Wireless communication would transmit road and traffic conditions more directly and independent from signs near or on the road, reported hackaday.com.

The publication likened the technology to airplane transponders, saying it would give vehicles “awareness of where other traffic is hanging out.”

The V2X technology also would include communication regarding infrastructure (V2I), pedestrians (V2P) and vehicle-to-network (V2N).

“Is this the future of road traffic?” asked the article. “The DOT seems to think that its deployment will be a good thing” — except for tricky regulations.

“V2X has been stuck in regulatory hurdles,” noted the publication. “This may now change, with the DOT releasing a roadmap for its deployment.”

As ITS explains, V2X-enabled cars also would be able to communicate with V2Xenabled bicyclists and pedestrians with V2Xenabled devices on themselves or a bike.

“This would then communicate with the vehicle’s ADAS, ideally preventing collisions between the vehicle and these much squishier traffic participants,” said hackaday.

“These personal V2X devices could be integrated into smartphones at some point, for example.”

ITS’ deployment plan envisions V2Xenabled cars with 5.9 GHz-enabled radios communicating with roadside units (RSU).

An exchange of relevant information would build upon the knowledge gained so far from cellular-V2X (C-V2X) trials, according to hackaday.

“The RSU would be placed at intersections, where it could eliminate many crashes.”

This while also providing the driver with information on when a traffic light will turn green and prevent the running of red lights.

While it sounds wonderful on paper, said hackaday, there’s the chance that spoofed V2X messages will affect traffic or cause casualties it seeks to avoid.

The ITS cybersecurity research program wants trusted communications between vehicles, infrastructure and other parties in a V2X-enabled system.

“This would seem to involve some secure way to signing messages while guaranteeing some level of anonymity,” noted hackaday.

To avoid collision, “you only need to know where the vehicle, bike or pedestrian in question is roughly located before any onboard sensors can detect it.”

“If V2X wants to succeed, it should be implemented and handled in a way that works with … biases, rather than against them,” said the article. “If lives are saved due to V2X-enabled cars …then those are convincing arguments.”

The publication maintains that implementing V2X might be easier than self-driving cars. That’s because it doesn’t change or replace anything more than do ADAS features in today’s cars.

“It might even be quite realistic to retrofit V2X into existing vehicles, significantly promoting kinetic hesitancy in close traffic situations,” said hackaday.com But the publication takes a cautious approach to the concept of V2X standardization: “We will have to wait and see what happens.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 93

CO N S T RUC T IO N

E Q UIP M E N T

AUCTIION

T HUR H SDAAYY, OC O T 31

575+ ITEMS SELL NO N RESERVE!

2 S E L L IN G DN3551 ‘23 Ditch Witch JT24 directional boring unit

DH1379 ‘07 CAT D6T XW W dozer

DD3277 ‘13 CAT D6T D XL dozer

DV5255 ‘19 Mack M Granite dump truck

DU3035 ‘15 Komatsu PC360LC-10 excavator

EK0008 ‘11 CAT 336E L excavator

DQ6181 ‘11 Komatsu WA470-6 wheel loader

DO2550 ‘98 Nordberg Lokotrack 100 jaw crush her

RR YYININCL CLCULDUD i: ec e nrs bohre in negl ulnoiatsd,er hrasu, lhtaruucl ktsru , ecxkc,arvoactokrs s,aw m mo baxcckahvat oaetso,rr,wdhuee em elplotarduecrkss , min mi niidexsctaeveartso,rste , rleeaha m IIN NVVEENNTTOORY OR O N UEDSE: dSir dcotzioenal do rsal, w eha amot wot , boar cgkrad hdoeerss,, e voe s, sk sk el hdan ayndl nmi dlex r, trrucks, skid steer e s, telehandler ers, tractors, digg derrick trucks, sem i ttrrucks, sewer er tr er vice trucks, wireline tr nd more. A nd scraper per, mini min nii e ex xcava ato tor, sc cr re ee enin niin ng p pllantsge , er crran cr rade ne truc u k , sing sin ngele lemd dr rum vib ibr a ateor orr yjerttoll oler o ler etrru, dckri,lllslin g rig ig t r u uc ck , buc bucket tr ttrruuc ucckkss, ,aa an nd mo morre eAl . l items are sold “AS IS.” 10% bu yers premium applies . 866.608.9283

Iowa Commission OKs RISE Projects The Iowa Transportation Commission approved the following items during its meeting Oct. 8 in Decorah, Iowa.

The RISE program was established to promote economic development in Iowa through construction or improvement of roads and streets. Iowa cities and counties are eligible for funding in the form of a grant, loan or combination thereof.

Projects must involve construction or improvement of a public roadway. There are two RISE project types: immediate opportunity and local development.

Rock Valley: Up to $1,482,758 from the city share of the RISE fund was approved for a business relocation and job retention local development grant to assist in construction of approximately 2,570 ft. of Summit Drive and 541 ft. of Tower Road located on the east side of town.

This project is necessary to provide improved access to 14 lots totaling approximately 25 acres. This project is anticipated to be completed by July 2025.

Sioux Center: Up to $942,294 from the city share of the RISE fund was approved for a local development grant to assist in construction of approximately 1,650 ft. of Frontage Road NW located on the northwest side of town.

This project is necessary to provide improved access to more than 12 acres for industrial purposes. This project is anticipated to be completed by July 2026.

City of Boone: Up to $5,775,530 from the city share of the RISE fund was approved to assist in the construction of approximately 1,700 ft. of Hancock Drive including turn lanes and a traffic signal at the intersection of Corporal Roger Snedden Drive and Hancock Drive, as well as a multi-lane roundabout at the intersection of U.S. 30 and

DO7513 3 ‘10 CAT 730 haul tru uck

ppurple p wave.com UNRESERVED D | ONLINE

PRO LINE LA AWN CARE

AUCT TION TUESDA AY Y,, OCTOBER Y 29, 2024 O

RIVERSIDE E, IOWA

Iowa DOT photo

Corporal Roger Snedden Drive all located on the southeast side of town.

These improvements are necessary to provide access to the proposed site of Daisy Brands, a manufacturer of soft dairy products. The project will support the commitment of the creation of 217 new full-time jobs out of 255 RISE eligible created jobs and almost $730 million in associated capital investment. This roadway also will provide improved access to additional economic development in the area. The Hancock Drive project is anticipated to be completed by November 2026 and the schedule of the U.S. 30 roundabout project is under development.

For more information, visit iowadot.gov/systems_planning/Grant-Programs/Revitalize-Iowas-Sound-EconomyRISE-Program. 

HIGHLIGHTS: ‘21 JCB 407 T4 Wheel Loadder, showing 599 hrs.; ‘21 JCB 407 T4 Wheel Loader, showing 416 hrs.; ‘21 JCB 4 407 T4 Wheel Loaderr,, showing 689 hrs.; ‘21 JCB 407 T4 Wheel Loader, showing 6 679 hrs.; ‘19 Cat 926M Wheel Loaderr,, showing 796 hrs.; ‘15 Catepillar 926M Wheel W Loaderr,, showing 1,042 hrs.; ‘15 Catepillar 926M Wheel Loader, showing 882 hrs.; ‘15 Catepillar 926M Wheel Loader, showing 977 hrs.; ‘07 Titan LG938 Wheel Loader, showing 1,393 hrs.; ‘17 Cat 259D Skid Loader, 589.0 hrs.; ‘16 Cateepillar 236D3 Skid Loader, showing 265 hrs.; CA ATT 236D Skid Loader, showing 896 hrs.; ‘23 EG380 stand on loaderr,, showing 12.3 hrs.; ‘11 Chevrolet Silverado 3500 Dump truck, showing 9,952 mi.; ‘01 Sterling dump truck, showing 451,857 mi.;; ‘99 International 4900 Straight truck; ‘95 Peterbilt 357 dump truck, showing 867 7,055 mi.; ‘93 Ford LLTT8000 Dump Truck, showing 651,179 mi.; ‘93 93 Kenworth W90 00 Dump truck, showing 688,218 mi.; ‘11 Chevrolet Silverado 2500 HD pickup, showing s 128,057 mi.; ‘09 GMC Kodiak Flatbed truck, showing 47,436 mi.; ‘08 GM MC Kodiak C4500, 25,411 mi.; ‘06 GMC Kodiak C5500, showing 26,417 mi.; ‘05 GM MC Kodiak C4500, showing 138,733 mi.; ‘99 Dodge Ram 1500 Sport pickup, showing 152,849 mi.; Plus trailers, mowers, snow pushers, snow plows, and other Misc. Equipment!

SCAN QR CODE TO VIEW FULL LISTING!

EQUIPMENT QUESTIONS: MICHAEL LOMBARD (319) 631-3 3006 SALES REP: CRAIG HOYER (319) 931-7016

www.bigiron.com

www.sullivanauctioneers.com

Page 94 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Students Attend Apprenticeship Event NAWIC, Dept. of Labor, On Oct. 8, high school students from across Chicagoland took significant steps toward careers in the equipment industry by learning essential diesel engine repair skills, trying their hand at operating equipment, polishing their interview techniques, and connecting with industry leaders.

Hosted by AEDF in collaboration with SkillsUSA Illinois and its Youth Workforce Development Foundation

AED Photo

Hosted by AEDF in collaboration with SkillsUSA Illinois and its Youth Workforce Development Foundation (YWDF), the Industry Pathways: Career Experience brought more than 500 students from 20 regional schools and career centers together with employers and unions.

(YWDF), the Industry Pathways: Career Experience brought more than 500 students from 20 regional schools and career centers together with employers and unions. These young participants received firsthand insights into careers as diesel technicians and equipment operators, helping address the equipment industry’s critical workforce needs.

This event, held at Johnsburg High School, was made possible by $8 million in federal funding that the YWDF and AEDF secured as part of the Apprenticeships Build America program earlier this summer. These funds support workforce development initiatives that engage youth across the country, demonstrating AEDF’s ongoing commitment to developing a skilled workforce that meets national demand. Throughout the day, students engaged in hands-on experiences, operating machinery, participating in mock job interviews, and building connections with potential employers actively seeking new talent.

“The AED Foundation is committed to equipping the next generation with skills and opportunities,” said Sean Fitzgerrel, vice president, AEDF. “We thank the Youth Workforce Development Foundation, the federal government and our industry partners for supporting our vision to bring real career opportunities to students across the nation.

Together, we are raising awareness and building the essential connections that will strengthen and secure the future of a skilled workforce in our industry.”

For more information, visit www.aedfoundation.org. 

Caterpillar, Trimble Extend Joint Venture Caterpillar Inc. and Trimble Caterpillar photo gy has created an ecosystem that announced the extension of their empowers customers across both long-standing joint venture. The the physical and digital worlds. agreement includes expanded disThe next phase of our joint venture tribution of grade control solutions will drive innovation in grade conin the construction sector to acceltrol technology to expand the erate innovation and customer industry opportunity with localized adoption. and differentiated solutions while Since 2002, the Caterpillar improving technology interoperTrimble Control Technologies ability,” said Rob Painter, president (CTCT) joint venture has led the and CEO of Trimble. “This partindustry in grade control solutions, nership underscores a joint comdelivering products that contribute Since 2002, the Caterpillar Trimble Control mitment to connect the office and Technologies (CTCT) joint venture has led the field throughout the designto jobsite safety and productivity. industry in grade control solutions, build-operate lifecycle of construcThe renewed agreement will the delivering products that contribute to jobincrease industry reach and pro- site safety and productivity. tion projects.” vide customers broader availability “Caterpillar and Trimble have a of interoperable grade control solulong history of innovating togeththe machine lifecycle tions via a flexible platform for use by • Expanded aftermarket and digital er,” said Tony Fassino, Caterpillar Caterpillar, Trimble and other technol- offerings directly through Cat dealers Construction Industries group presiogy providers and equipment manuTrimble customers also benefit dent. “We are proud of what we’ve developed to help customers optimize facturers. With a strengthened partner- from broader availability: ship, this agreement enables both • Continued mixed-fleet support their operations, including grade control. Today’s announcement is a conTrimble and Caterpillar to increase from trusted SITECH dealers innovation and differentiation, devel• Expanded distribution network to tinuation of this collaboration. With a op new offerings and pursue new reach and meet the needs of mixed focus on accelerating this leadingedge technology, we are committed to industry and geographic opportunities. fleet customers For Caterpillar customers, there are • Streamlined access to grade con- making it easier for customers to more ways to access the technology: trol through Trimble Construction One acquire and adopt our solutions across • Factory-fit grade options through suite of digital solutions further Cat and mixed fleets alike.”

For more information, visit Caterpillar extends Trimble’s construction techwww.caterpillar.com and www.trim• Cat Grade 3D Ready options nology ecosystem allow upgrading at any point within “Trimble’s Connect & Scale strate- ble.com. 

Community Leaders Join for Roundtable

NAWIC photo

The collaborative roundtable and signing event fosters workplace stability, inclusion and support for Lansing, Mich., workforce and the nation.

The National Association of Women in Constructions (NAWIC) President-elect Rita Brown joined leading innovators in Michigan’s workforce on Sept. 5 at the U.S. Department of Labor’s Lansing, Mich.-area Good Jobs Principles Roundtable, and signed a national initiative designed to support the creation of quality jobs that enhance stability, promote inclusivity and empower workers across the construction sector and beyond.

This initiative is led by U.S. Department of Labor Acting Secretary of Labor Julie A. Su and locally by Andy Schor, mayor of Lansing.

The Good Jobs principles were created to enhance communities and business competitiveness on a global scale with a framework of principles for workers, businesses, labor unions and governments to create a shared vision of job quality. Cities across the country are adopting these principles.

Brown’s insight on the construction industry as CEO of Brown Construction Collective Plus (BCC+), brings a nationwide perspective, based on her significant volunteer and corporate work in advocating and advancing women and underrepresented populations.

“The Good Jobs Initiative is important and tangible for our members [NAWIC’s] and for the growth and stability of the construction industry. The reinforcing principles of the Initiative speak directly to our NAWIC mission and vision.

Connecting resources between employers, employees, unions, government and industry is intentional and resourceful. There isn’t a downside,” said Brown.

NAWIC was invited to participate in this significant initiative, marking a historic moment for this nationwide organization. Being part of this event spotlights NAWIC’s presence nationally and demonstrates the organization’s commitment to advocating for job quality, advancement, inclusivity; benefiting the industry and NAWIC members. NAWIC currently has 120 state-based chapters in eight regions, representing women working in all aspects of the construction industry.

The National Association of Women in Construction is dedicated to advocating for recognition of the value and impact women bring to these industry jobs and amplifying their relevance in all aspects of the construction industry.

For more information, visit nawic.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 95

Page 96 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Vendors Show Latest Equipment, Technologies at Equip Expo EQUIP from page 88

Paul Latam of Reist Industries demos the R18HD dominator stump grinder.

Sean Cullen (L) and Isaac Roth of Ventrac were at Equip Expo with the Ventrac 4520N compact tractor.

Dave Toresci (L) and Eric Elek of Buyers Products showcase the VGX 85 II snowplow.

(L-R): Randy Harris (L), Altoz district sales manager, shows Mark Schuster of Schuster Landscaping the new Altoz Switch compact tool carrier featuring a 48-in. power angle broom attachment, while Rod Larson, Altoz parts and accessories manager, looks on.

(L-R) are Bren McMillen, senior sales specialist; Travis Templeton, sales; and Jared Medhus, business development manager, all of Ignite Attachments, Moorehead, Minn.

Frank Maenpaa (L) and Craig Sandmann gave details about the Hilltip Icestriker salt spreader.

Dan Kakareka, product specialist of New Holland Construction, shows off the E90D excavator which digs up to 14 ft. and has an operating weight of 20,305 lbs. The 73hp excavator also is available with a long arm for a dig depth of 15 ft.

(L-R): Quincy McKinney of Williams Lawn Care, Clarksville, Tenn., checks out the engine compartment of this DEVELON DX 62 R excavator, with DEVELON’s Tim Gerbus, equipment specialist, and Billy Williams, owner of Williams Lawn Care.

Nathaniel Zumhagen checks out the new Case TV370B compact track loader wrap by Dirty Graphics.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 97

Minnesota’s Fall Maintenance Expo Addresses Fall, Winter Equipment Issues MINNESOTA from page 32

Tom Major (L), territory manager of Road Machinery & Supplies in Savage, Minn., and Norm Michels, streets, parks and fleet superintendent of the city of Big Lake, Minn., looking at plows, loaders and equipment needed for the big upcoming winter, including this Komatsu WA320 loader with a 12-ft. Craig plow system.

Steve Johansen (L), Douglas County Public Works superintendent, talks with Tim Erickson of Towmaster Trailers and Truck Equipment, Litchfield, Minn.

(L-R) are Brett Hart, KAGE Innovation marketing manager; Kaydence Favre, KAGE Innovation marketing assistant; Beau Montgomery, SANCO Equipment business development manager; Joe Graham, SANCO Equipment sales and rental manager; and John Bostwick, XCMG regional sales manager.

Lano Equipment of Anoka, Minn., had its extensive product lines available at the show.

Titan Machinery of Fargo, N.D., had a full booth with attendees checking out the latest equipment from Case.

Page 98 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

®

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AIM ATTACHMENTS ............................................................34 ALEX LYON & SON INC HOUSTON TX 11/6 SAUGET IL 11/12 ........................95 ALEX PARIS CONTRACTING CO INC ................................12 ALTA EQUIPMENT COMPANY..........................................100 AMERICAN STATE EQUIPMENT ..........................................7 ASPEN EQUIPMENT ............................................................84 ASTEC CARLSON PAVING PRODUCTS INC ....................61 ASTEC ROADTEC ................................................................55 ASV ......................................................................................49 BARGAINS ............................................................................89 BASIC EQUIPMENT ............................................................67 BELL TRUCKS AMERICA INC ............................................35 BIG IRON AUCTIONS ..........................................................93 BOBCAT COMPANY ......................................................50,51 BROOKS TRACTOR ............................................................15 CEG SCALE MODELS..........................................................30 CEG WANTED ......................................................................90 CMW EQUIPMENT ..............................................................66 CONDUIT SEARCH GROUP................................................46 D ROCK GRIZZLY ................................................................29 DON SMOCK AUCTION CO ................................................97 DYNAPAC ............................................................................59 FABICK CAT ..........................................................................2 FAE USA INC........................................................................69 FINKBINER EQUIPMENT CO ................................................7 FLANGE LOCK ....................................................................10 FOLEY EQUIPMENT ..............................................................9 GEHL ....................................................................................34 GOMACO CORP ..................................................................70 HINIKER ................................................................................87 HITACHI CONSTRUCTION MACHINERY ..........................99 HYUNDAI CONSTRUCTION EQUIPMENT ....................44,45 IMPACT ROLLER TECHNOLOGY INC. ..............................68 IRAY AUCTIONS INC IRAY AUCTION 12/4 ....................................................97 JCB INC ................................................................................75 JFW EQUIPMENT INC ........................................................60 JJ SCHECKEL CORP ............................................................3 JOHN DEERE ..................................................................40,41 JOHN DEERE SKID STEER............................................36,37

KAGE INNOVATION ............................................................85 KIRBY-SMITH MACHINERY INC ........................................22 KOMATSU AMERICA CORP ..........................................78,79 KUBOTA SVL ........................................................................47 LEEBOY ..........................................................................62,63 LIEBHERR UNITED STATES CO. ......................................17 LINK-BELT EXCAVATORS ..................................................73 MACALLISTER MACHINERY CO INC ................................26 MANITOU GROUP................................................................80 MAULDIN PAVING PRODUCTS ..........................................58 MCCANN INDUSTRIES INC ..................................................6 MCCOY CONSTRUCTION & FORESTRY ......................11,29 MECALAC NORTH AMERICA LLC ......................................74 MID COUNTRY MACHINERY ..............................................23 MOROOKA USA ..................................................................20 NEWMAN TRACTOR............................................................25 NPK CONSTRUCTION EQUIPMENT INC ..........................31 PARTS ASAP ........................................................................21 PRINOTH ..............................................................................28 PURPLE WAVE INC CONSTRUCTION EQ AUCTION 10/31 ........................93 ROAD BUILDERS MACHINERY & SUPPLY........................13 ROLAND MACHINERY CO. ..................................................5 ROSCO MANUFACTURING ................................................54 SAKAI AMERICA INC ..........................................................69 SANY AMERICA INC ............................................................27 STAR EQUIPMENT LTD ........................................................6 TAKEUCHI ......................................................................76,77 TOPCON POSITIONING SYSTEMS ....................................68 TORO ....................................................................................38 TOUGH SEATS ....................................................................34 TRI-STATE BOBCAT ............................................................28 VLP AN EQUIPMENTSHARE COMPANY ..........................21 VOLVO COMPACTION ........................................................71 VOLVO CONSTRUCTION EQUIPMENT..............................48 WACKER NEUSON AMERICA CORPORATION ................33 WEILER PRODUCTS ......................................................64,65 WEST SIDE TRACTOR SALES ............................................6 WIRTGEN AMERICA ......................................................56,57 YANMAR AMERICA CORP ..................................................81

The Advertisers Index is printed as a free editorial service to our advertisers and readership.

Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 26, 2024 • Page 99

www.hitachicm.us s

BUUILT TO WORRK, BUUILT TO LASTT Engineered for relentless power, unwave ering reliability and effortless control Hitachi Consstruction Machinery 7-Series s Wheel Loaders

A legacy of o strength, e a future of progr o ess © 2024 Hitachi Construction C Machinery Americas Inc.

Construction Machinery Company

Kelbe Brothers Equipment Co., Inc.

Kirby-Smith Machinery, Inc.

www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502/267-4020 • 866/901-2262

www.kelbebros.com 12770 W. Silver Spring Drive Butler, WI 53007 262/373-2151

www.kirby-smith.com 8320 Ruby Avenue Kansas City, KS 66111 913/850-6300

2235 Ragu Drive Owensboro, KY 42303 270/683-2000 • 877/683-2262

4621 Dutch Mill Rd. Madison, WI 53716 608/221-8300

4923 Rockwell Road Winchester, KY 40391 859/759-4404

3101 French Rd. DePere, WI 54115 920/343-6496

6104 Sable Mill Court Jeffersonville, IN 47130 812/850-6160

General Equipment & Supplies

Mid Country Machinery

www.genequip.com 4786 Rice Lake Duluth, MN 55803 218/297-1105

www.midcountrymachinery.com 3478 5th Ave. S. Fort Dodge, IA 50501 800/206-5936

4600 Valley Industrial Blvd. S. Shakopee, MN 55379 952/224-1500

4718 Sergeant Road Waterloo, IA 50701 319/234-8710

3901 N. Jessica Ave. Sioux Falls, SD 57104 605/336-9000

106 8th Street Sergeant Bluff, IA 51504 866/539-8106

2135 Dakota Craft Drive Rapid City, SD 57701 605/401-4184

3509 Franklin St SW Bondurant, IA 50035 515/410-9900

Page 100 • October 26, 2024 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.construction.altg.com

Byron Center, MI 616.878.7450

Detroit, MI 313.394.1811

Jackson, MI 517.663.8000

Ottawa, IL 815.313.2070

New Hudson, MI 248.356.5200

Flint (Burton), MI 810.744.4840

Bloomington, IL 309.585.3800

South Elgin, IL 630.883.3320

Traverse City, MI 231.943.3700

Gaylord, MI 989.731.9988

Orland Park, IL 708.349.8430

Gary, IN 219.977.4210