Issuu

Published Nationally

$3.00

Midwest Edition

July 25 2020 Vol. XXV • No. 15

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Crews Place Keystone on Iowa-Illinois Bridge Iowa Department of Transportation photo

Industry Lauds Easing Hours of Service Regulations...8

JCB Secures New Military Equipment Fleet Contract...14

The I-74 Mississippi River Bridge project is part of an overall plan to improve the I-74 corridor from Moline, Ill., to Davenport, Iowa.

Jeff Martin Hosts Equipment, Truck Auction in Columbus...70

Table of Contents ............4 Recycling Section ....41-54

By Brenda Ruggiero CEG CORRESPONDENT

Crews are well into construction of the second arch of the I-74 Mississippi River Bridge. Construction of the new bridge began in July

2017. The westbound bridge is anticipated to be completed by the end of 2020 and the eastbound bridge in 2021. The new bridge will be more than twice as wide as the existing bridge, providing four lanes in each direction. The full dollar amount of the overall project

By Cindy Riley

Business Calendar ........67 Auction Section ......69-73 Advertisers Index ..........74

see KEYSTONE page 32

MDOT ‘Paves the Way’ to Improve Trade Corridor

Attachment Section 55-58 Truck & Trailer Section .... ..................................59-65

is estimated at $1.2 billion. The I-74 Mississippi River Bridge project is part of an overall plan to improve the I-74 corridor from Moline, Ill., to Davenport, Iowa. From 2017 to 2021, construction is taking place

CEG CORRESPONDENT

and exit ramps at the I-96, Creyts Road and Waverly Road interchanges. These improvements will provide increased safety and mobility in this area of I-496,

The Michigan Department of Transportation (MDOT) is overseeing a see MDOT page 36 $60 million project that will improve I496 between I-96 and Lansing Road. Work includes reconstructing the freeWork includes reconstructing the freeway way and ramps, preventive mainteand ramps, preventive maintenance on all nance on all bridges in the project area bridges in the project area and making and making operational improvements to the entrance and exit ramps. operational improvements to the entrance

MDOT photo

Page 2 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2009 Cat D6TLGPARO / $155,000

2016 Cat AP1055F / $205,000

2013 Cat 420FHT / $59,000

SN: WCG00536

SN: TJ500330 Hours: 5,043

SN: SKR02413 Hours 2,596

2013 Cat 740B / $325,000

2016 Cat 316FHT / $129,000

2017 Cat 299D2C3H3 / $62,000

SN: T4R01488 Hours: 7,566

SN: YDL00339 Hours: 2,497

SN: FD201721 Hours 1,086

2011 Cat 320DLR / $135,000

2014 Cat 980K / $375,000

2013 Cat D6TLGP / $135,000

SN: SPN00797 Hours: 7,105

SN: W7K01902 Hours: 8,619

SN: KSB01462 Hours: 8,587

636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ July 25, 2020 â€¢ Page 3

2014 JLG 66 60SJ Aerial Lift ........ $59,500 'HXW] 7' / 7LHU +3 GLHVHO Â¶ SODWIRUP KHLJKW :' ZKHHO VWHHU 6N\ SRZHU Â¶ EDVNHW Â¶ MLE [ WLUHV JUDGDELOLW\ OEV KUV 67

2018 JLG 1255 Te elehandler .... $107,500

â€˜17 Freightliner FL1114SD Hooklift . $145,000

:' OEV Â¶ UHDFK IURQW VWDELOL]HUV Â´ [ Â´ carriage, front hydraulic coupler, aux. hydraulics, aulics, multifunction display w/backup cam, road lights,, work lights, EHDFRQ OEV ZDUUDQW\ KUV 67

$OOLVRQ 5'6 DXWR WUDQV WDQGHP D[OH GRXEOH IUUDPH VSULQJ VXVSHQVLRQ FUXLVH FRQWURO EORFN KHDWHU 6ZDSORDGHU 6/ /LIW +RRN FDSDFLW\ W\ GHJUHH GXPS DQJOH Â´ KRRN KHLJKW Â´ KRRN WR UHDU UROOHU 0LOHV 1

2016 JLG 1055 Forklift ........ $102,500

2016 Deere 670G Motor Grader .. $139,500

2012 Cat 420EIT Loader Backhoe. oe. $42,500

2015 Cat 420F2 Loader oader Backhoe .. $72,500

Heat, 130HP T4f, 4WD, 55â€™ reacch, front stabilizers, solid tires, 3 mode steering, au uxiliary hydraulics, road lights, work lights, beacon n, fenders, 33,100 OEV KUV 67 $

Rear Ripper, Lo o Pro Cab, heat and A/C, 235 HP T4i, variable ho orsepower, 4WD, 14â€™ moldboard, powershift, hydraulicc sideshift, push block, air ride seat, 5 WLUHV GLá‚‡ ORFN KUV

+3 :' VKXá‚‰H VKLIW WUDQV H[WHQGD KRH Â¶ Â´ dig depth, 1.31 yrd bucket, front hydr. cou upler, front aux K\GU IURQW HOHFWULF KRRNXS Ã€LS RYHU DXWR XS VWDELOL]HUV Â´ UHDU EXFNHW OEV KUV

A/C, 100HP Tier 4 diesel, 4WD, auto shift trans., extenda-hoe, Â¶ Â´ GLJ GHSWK \G IURQW EXFNHW Ã€LS RYHU VWDELOL]HUV Z guards, auto up stabilizers, s, aux rear hyd., hydraulic thumb, Â´ UHDU EXFNHW FROG ZHDWKHU SNJ KUV

2015 Kobelco SK140SRL LC-3 .... $92,500

â€˜14 Hydrema 9 912ES w/ High Rail Gear. $119,500

2016 Deere 544K Wheel Loader . $129,500

2015 Kobelco SK210LC-9 10LC-9 Excavator . $98,500

A/C, 141HP diese el, High Rail Gear, multi tip rotating box, up to 90 degreess left/right, 10 ton capacity, auto. trans., :' DXWR ERG\ UHWXUQ WR FHQWHU SRVLWLRQ GLá‚‡ ORFN KHDWHG VHDW UHDU YLHZ FDPHUD KUV

A/C, 125HP T4f diesel, JRB q-tach bucket, cket, joystick control, F-R thumb switch, ride control, 20.5R25 WLUHV OLPLWHG VOLS GLá‚‡ UHDU GLá‚‡ ORFN FROG ZHDWKHU package, 29,200 lbs., 338 hrs. .................... ........ #11513

&DE ZLWK $ & +LQR - ( 7, +3 7LHU GLHVHO Â´ SDGV Â¶ Â´ VWLFN Â¶ GLJ GHSWK KDQG FRQWURO 1-2 way auxiliary hydraulics, draulics, pattern control, 48,500 lbs., 3,411 hrss. ........................ #KOB244

$ & +3 7LHU GLHVHO ,1'5 Â´ SDGV Â¶ Â´ VWLFN Â¶ Â´ GLJ GHSWK DGGLWLRQDO FRXQWHUZHLJKW SDWWHUQ control, hand control 1-2 way aux. ux. hydraulics, top ZRUN OLJKWV OEV KUV .2%

â€˜14 Kobelco SK350LC Exc cavator. $147,500

â€˜18 Kobelco SK85CS-3E S Excavator . $64,500

â€˜18 Kobelco SK85CS-3E Excavator or . $67,500

2012 Cat M322D Wheeled eeled Excavator... $154,500

$ & +3 7LHU GLHVHO ,1'5 Â´ UXEEHU SDGV Â¶ Â´ VWLFN Â¶ Â´ GLJ GHSWK DGGLWLRQDO FRXQWHUZHLJKW KDQG FRQWURO ZD\ DX[ K\GUDXOLFV OEV KUV .2%

$ & +3 ,1'5 UXEEHU WUDFNV Â¶ VWLFN Â¶ Â´ GLJ GHSWK 8â€™ pushblade, swin ng boom, 1&2 way hydraulics, mechanical TXLFN FRXSOHU SDWWWWHUQ FRQWURO DGGLWLRQDO FRXQWHUZ ZHLJKW OEV Wa arranty 3,000 hr. or 10/24/20, 2,392 hrs. .......... #KOB344

$ & +3 ,1'5 UXEEHU WUDFNV Â¶ VWLFN Â¶ Â´ GLJ GHSWK 8â€™ pushblade, swing boom, 1 & 2 way aux. hydraulics, raulics, hydraulic quick coupler, pattern control, additional counterweight, rweight, OEV :DUUDQW\ KUV RU KUV .2%

$ & +3 GLHVHO Â¶ Â´ VWLFN Â¶ Â´ GLJ GSWK DX[LOLDU\ hydraulics, 4 outriggers, s, anti drift valves, roading pkg., &DW YDULDEOH SLQ JUDE K\G FRXSOHU Â´ GLWFKLQJ EXFNHW ZLQGRZ JXDUG OEV KUV

sales@iltru uck.com â€¢ renta al@iltruck.com â€¢ 815-941-1900 Illinois Truck & Equipment 320 0 Briscoe Drive, Morris Illinois 6045 50

www.iltruck.com

Page 4 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE 12

INDUSTRY LAUDS EASING HOURS OF SERVICE REGULATIONS

Touting its revised Hours of Service (HOS) regulations as providing drivers more flexibility, the Federal Motor Carrier Safety Administration (FMCSA) released a final rule in May.

RCE EQUIPMENT SOLUTIONS ANNOUNCES NEW RAILAVATOR SERIES

CAT FOUNDATION HELPS FIGHT RACISM, SOCIAL INJUSTICE

RCE Equipment Solutions, a railroad maintenance equipment manufacturer, has a new series of Railavators available: John Deere models 210G, 245G and 250G high-rail excavators.

The Caterpillar Foundation, the philanthropic arm of Caterpillar Inc., announced a commitment to help fight racism and social injustice. The foundation is donating $1 million split between two organizations.

JCB has been awarded a contract to supply the U.S. military with a fleet of specialized high speed excavators over the next eight years in a deal worth up to $269 million.

The Milwaukee Art Museum’s Quadracci Pavilion provided the backdrop for the Milwaukee debut of a brand new Liebherr LTM 1230-5.1 from Dawes Rigging & Crane Rental, a member of the ALL Family of Companies.

JCB SECURES NEW MILITARY EQUIPMENT FLEET CONTRACT

RUNNION EQUIPMENT EXPANDS ITS SALES TEAM WITH JOHN PIELLI

DAWES RIGGING & CRANE RENTAL DEBUTS CRANE AT MILWAUKEE PROJECT

FELLING ACQUIRES 2-CELL GANTRY ROBOT, INCREASING EFFICIENCY

Runnion Equipment Company is growing its sales team with the addition of John Pielli. He will be focusing on the northern Illinois area, making sure that customers have the equipment they need to get the jobs done.

Felling Trailers has always strived to be at the forefront of innovation — from the trailers it manufactures to the equipment its team uses to build them. In 2019, Felling acquired a 2-Cell Gantry Robot with Fanuc R-100iC Robotic Arms.

LBX Company LLC, Lexington, Ky., announced standard full-machine warranty terms of 5 years or 5,000 hours on new Link-Belt X4 excavators purchased after July 1, 2020.

When Dervin Witmer founded Dig-it Excavating, a small, family-owned and operated company based in Cassopolis, Mich., he knew the way he marketed his business would be instrumental in achieving success.

Takeuchi-US has introduced EquipmentShare as a new dealer. Located in Columbia, Mo., it will be selling the full range of Takeuchi track loaders, excavators and wheel loaders.

Intercomp, a manufacturer of portable vehicle weighing and measurement products, has made its IntercompWIM Delta software available to the global industrial scale market.

Association of Equipment Manufacturers (AEM) president Dennis Slater issued the following statement supporting introduction of legislation to strengthen manufacturing by U.S. Senator Gary Peters of Michigan:

As Jeff Martin Auctioneers returns to its popular auction format featuring onsite and online bidding, the company has taken every precaution to ensure that its auctions are both highly successful and safe for those in attendance.

LBX ANNOUNCES NEW WARRANTY FOR ITS LINK-BELT X4 EXCAVATORS

TAKEUCHI ANNOUNCES EQUIPMENTSHARE AS NEWEST DEALER IN COLUMBIA, MO.

AEM APPLAUDS LEGISLATION TO STRENGTHEN MANUFACTURING

Founder, Publisher & CEO Midwest Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Joseph S. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

KENWORTH T880 IS KEY MARKETING TOOL FOR DIG-IT EXCAVATING

RECYCLING SECTION

41 46 49 50 50 52 52

CAT MH3040 MATERIAL HANDLER CUTS FUEL BY UP TO 25 PERCENT SENNEBOGEN HOSTS DEMO DAY AT ITS HQ ERIEZ PULLEYS CAN TRANSFORM BELT CONVEYOR INTO SEPARATOR TEREX WASHING SYSTEMS OFFERS LOCAL, REMOTE TECH SUPPORT

W.S. TYLER EQUIPMENT REBRANDS TO HAVER & BOECKER NIAGARA METSO LAUNCHES NW RAPID RANGE FOR N. AMERICAN MARKETPLACE IROCK CRUSHERS LAUNCHES NEW WEBSITE, REDESIGNS LOGO

DEPARTMENTS

INTERCOMPWIM DELTA SOFTWARE SIMPLIFIES INVENTORY TRACKING

67 69

BUSINESS CALENDAR COMING AUCTIONS

JEFF MARTIN HOSTS EQUIPMENT, TRUCK AUCTION IN COLUMBUS

55 55 56 58

SOOSAN AMERICA SS-2000 DTH Drill GRADALL Fixed Thumb Grapple EAST ATTACHMENTS Buckets, Rakes PALADIN FD60 High-Flow Forestry Disk Mulcher

EQUIPMENT

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

• National Sales Manager

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

MIDWEST EDITION

YouTube

773/769-4090 312/953-0375 jmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2020, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 5

V I S I T

Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers

2017 KOMATSU 845

$339,500

2013 DEERE 703JH

2015 KOMATSU D61PX-24

$169,500

2015 WIRTGEN W220

STK# VT20014, 2,200 HRS, EAU CLAIRE, WI

STK# KM20131, 3,073 HRS, SCHOFIELD, WI

$150,000

STK# HM20017, 3,277 HRS, SPRINGFIELD, IL

2018 KOMATSU PC238USLC-11 $189,500

$CALL

2018 WIRTGEN W120CFI

$CALL

2018 TIMBERPRO TN725D

$399,500

$159,500

2015 KOMATSU D65PX-18

$209,500

STK# JD19018, 12,102 HRS, EAU CLAIRE, WI

STK# WG19010, 3,964 HRS, SPRINGFIELD, IL

2012 HAMM HD+120VO

$39,500

STK# WG20036, 475 HRS, SPRINGFIELD, IL

2017 KOMATSU PC210LC-11 $149,500

2016 KOMATSU D39PX-24

$119,500

2017 KOMATSU WA320-8

2017 KOMATSU D65PX-18

2017 KOMATSU WA380-8

$219,500

2015 KOMATSU PC170LC-11 $119,500

STK# KM19698, 2,751 HRS, SPRINGFIELD, IL

$199,500

STK# KM20132, 3,375 HRS, DEFOREST, WI

STK# KM19557, 943 HRS, PALMYRA, MO

STK# KM19470, 1,219 HRS, BOLINGBROOK, IL

STK# KM19425, 1,039 HRS, CAPE GIRARDEAU, MO

STK# KM20118, 3,185 HRS, PALMYRA, MO

STK# KM20134, 1,464 HRS, DEFOREST, WI

STK# TP20001, 2,235 HRS, SCHOFIELD, WI

STK# KM19234, 3,500 HRS, SPRINGFIELD, IL

2016 KOMATSU PC138USLC-11 $119,500 STK# KM19402, 2,360 HRS, SPRINGFIELD, IL

17 Roland Branch Locations in IL, IN, MI, MO, and WI

Used Sales (217) 789-7711

R O L A N D M A C H I N E R Y . C O M

Page 6 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com

View our complete Used & “Like New” inventory at McCannOnline.com

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110

2019 Case 621G loaders available. Low hours, warranty, financing available. Call today for details

2018 Takeuchi TL10, s/n 410002044, 365 Hours, Cab with Heat and AC, Two Speed, Hyd Coupler, 72" Smooth Bucket ....$55,900

2015 Leeboy 8500C s/n 122257 , 2750 Hours, Paving Width 8'-15', Heated screed, Legend Screed System ....................$59,900

McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana Merrillville 219-576-7800 Mishawaka* 574-406-6800

2017 Takeuchi TL12, s/n 412100463, 1400 Hours, Cab w/AC, Hyd Coupler, Pattern Changer, New Tracks, 84” Tooth Bucket........ ........................................................$52,500

2017 Takeuchi TL12, s/n 412100496, 2200 2019 Case IH 40C, s/n 4FJ000097, 15 Hours, Cab w/AC, Hyd Coupler, Pattern Hours, Cab, 4WD, 540 PTO, 3PT, Front End Changer, New Tracks, 84" Tooth Bucket ........ Loader..............................................$35,000 ........................................................$50,500

2013 Case SR200, s/n NDM467344, 160 Hours, ROPS, Ride Control, Mechanical Controls, No Bucket ........................$25,000

Schereville* 219-865-6545

Michigan Marne* 616-371-7250

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

Gov. Kelly Announces Cost Share Program Recipients Gov. Laura Kelly and Transportation Secretary Julie KDOT is committed to doing all we can to cut through it to “The value of the Cost Share program is not only that the Lorenz announced on July 9 the recipients across the state of provide timely transportation investments,” Lorenz said. state and communities can work together to stretch their dolthe Kansas Department of Transportation’s Cost Share “We can expedite the delivery of projects and still be collab- lars, but also to craft solutions that best serve the communiProgram. These 24 projects total more than $20 million in orative with our local partners.” ty,” Sen. Carolyn McGinn said. transportation investments statewide. Through this program, communities have the opportunity The projects selected are a part of the larger Eisenhower The Cost Share Program provides funding to local entities to revise their applications and funding requests based on Legacy Transportation Program (IKE), a 10-year program for transportation projects that improve safety, support job feedback from KDOT staff in order to strengthen their pro- approved by the 2020 Kansas Legislature and signed off by retention and growth, improve access or mobility, relieve posals. About half of the recipients took advantage of that Kelly, to address infrastructure needs across the state. congestion and help areas across the state improve the trans- opportunity. portation system. Cost Share “From day one of my administration, I committed to Program Recipients rebuilding our infrastructure and putting an end to using critical transportation dollars to cover the state’s unpaid •Nottingham Redevelopment (Eudora) • Garnett Municipal Airport Runway Reconstruction debts,” Kelly said. “Today’s announcement is one of • West. 27th Street Clinton Spillway connection (Garnett) several steps my administration is taking to build a foundation for Kansas to be economically competitive (Lawrence) • Christian Hills Bridge Replacement (Greenwood County) now and into the future. Projects like infrastructure cost • 91st Street Bike and Pedestrian Trail Improvements • Bridge Deck Rehabilitation (Parsons) share are a perfect example of how government can • Maple Street Improvements (Independence) make smart, economic innovations that will make our (Overland Park) • Ottawa Street Reconstruction (De Soto) • Redbud Rail-Trail City Section (Augusta) economy more dynamic and competitive. There were 136 projects totaling $228 million in • North Campus Corridor (Manhattan) • Wheatridge Paving Extension (Newton) requested funds for the spring 2020 round. These num• Randolph Asphalt Overlay (Randolph) • Downtown Kingman Sidewalk Project (Kingman) bers highlight the pent-up demand for transportation • Nighthawk Road Reconstruction (Marion County) • Three Bridge Replacements (Kingman County) projects across the state. • Peabody School Street Improvements (Peabody) • Cleveland Ave Intersection improvements (Sterling) Projects were awarded in every region of the state, with some beginning construction as soon as this fall. • Courtland Overlay Project (Republic County) • K-42 Access at BrightWater Bay (Wichita) There was added emphasis on selecting projects that • Logan County Road Improvements (Logan County) • Clark and Comanche Counties Asphalt Improvement would create a steady influx of construction jobs over • Feedyard Road Improvements (Sheridan County) Project (Clark and Comanche Counties) the next year. • Goodland Street Improvements (Goodland) • Jewell Road Reclamation Project (Ford County)  “Our economic recovery won’t wait on the red tape,

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 7

Grove RT880E – (’14), 80 Ton, 128’ Boom, 56’ Jib, 3,426 hrs, C001236…$469,000

Roadtec RP190E – (’17), 230 HP Rubber Tired Paver, 10’-19’6” Carlson Easy Screed, C002930...$P.O.R.

Liebherr L556 – (’11), 188 HP, 23.5R25EM tires, RC, QC, 4.58 YD bkt, #15360…POR

Manitowoc 10000B-1 – (’13), 75 Ton, 190’ Boom, 60’ Jib, C002371...$749,000

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT ASTEC GT205S, (’17), Triple Deck Crawler Mounted Screen Plant. #C003398............................................$CALL EXTEC S5, (’08), Double Screen Crawler Screening Plant, (2) 8’x5’ double deck vib screens, (2) hyd folding wing conveyors, #C002706 ..............................................................................................................................$95,000 JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000 KPI FT4250CC, (‘11) Track Mounted Impact Crusher, #C003741 ................................................................$CALL SANDVIK CH430, (‘13) Closed Circuit Cone Plant, 6’x20’ TD Screen, #40230 ......................................$493,000 KPI GT36X80, (‘16) Track Mounted Stacker, #C002294 ..............................................................................$CALL

CRANES GROVE RT635, (’98) 35 Ton Capacity, 105’ Boom, 29’ Jib, SN82072 ....................................................$49,000 GROVE RT650E, (’14) 50 Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$369,000 GROVE RT765E-2, (’14), 65 Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ........................................$389,000 GROVE RT880E, (’13), 80 Ton, 128’ Boom, 56’ Jib, Aux Winch, #C000782 ........................................$459,000 GROVE TMS900E, (’05), 90 Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ......................................$279,000 KOBELCO CK1000, (’01), 100 Ton, 190’ Boom, 60’ Jib, Aux Winch, #C003428 ..................................$219,000 LIEBHERR HS855HD, 100 Ton Duty Cycle Crane, 105’ Boom, (2) Hoist with 20,000 SLP ..................$850,000 MANITOWOC 12000, (‘07) De-Rated 100 Ton, 200’ Boom, 60’ Jib, 3rd Drum, #C002372 ..................$279,000

LOADERS AND EXCAVATORS: LIEBHERR A902 SPEEDER, (‘98) 10 x 20 Tires, 4 Outriggers, Aux Hyd, #C001293..................................$CALL LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R954CHD, Super Long Reach Excavator - 42'8" Boom, 32'10" Stick. 70' reach @ Ground Level, #C028565 ....................................................................................................................................................$POR LIEBHERR R946LC, (’14), Long Reach, 60’ Reach at Grade, 2.15 yd bkt. #C000938 ................................$POR

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Park Allison at:

pallison@amstate.com or mobile 1-414-355-1074 or 1-800-236-6900 Visit us at: www.amstate.com

KPI FT4250CC - ‘14, approx 2000 hrs. 3 bar, Roadtec RP190 - ‘13, approx.. 6200 hrs. EZIV 18’ feeder, xtra cross over conv, magnet, Carlson screed, Moba grade & slope controls .. Moblestar ..........................................$557,000 ............................................................$58,900

GRADALL XL4100 IV - ’15 w/4850 hrs, #C001984 ........................................$195,000

PAVERS / ROAD WIDENERS BOMAG CR662RM - ‘15, 373 Hrs, Material Transfer w/Hopper, #C000763 ............$435,950 Midland SPD-8 - ‘19 w/50 Hrs, hyd. Variable strike-off, #C001697 ..........................$179,800 Midland SPR-6 - ‘18 w/360 Hrs, wash down, hyd. Variable strike-off, #C001737 ......$112,450 P.O.R. items may be on rent causing pricing and hours to vary.

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

EXCAVATORS Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ................$P.O.R.

CRUSHING AND SCREENING

ASTEC GT104 - ‘17, 71 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154 ............ ..............................................................$P.O.R. BROOMS ASTEC GT165 - ‘17, 390 Hrs, 5’x16’ Top Deck, 5’x15’ Bottom Deck, 10.5 Cyd Hopper, Roadtec FB100 - ‘16, approx.. 50 Hrs. Front mount, side-shift, A/C ............................$P.O.R. #C001250 ................................................P.O.R.

MILLING MACHINES BOMAG BM600 - ‘16, 182 Hrs, 24” Drum, Load Out Conveyor......................................$184,000 BOMAG BM1200/35 - ‘15, 600 Hrs, 4’ Drum, 3’ Also Available, Front Conveyor, #C000846 ........ ..........................................................$292,852 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900 Roadtec RX-700 - ‘12 w/5000 Hrs., 7’2” drum, grade & slope controls, #C001978 ....$197,200

ROLLERS Sakai GW750-2 - ‘14, 691 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ......*$99,950 Sakai SW770HF - ‘17, w/930 Hrs, #C001144.... ............................................................$84,900 Sakai SW770HF - ‘17, 450 Hrs, 67” high frequency, #C001168............................$96,000 *Comes with any remaining standard and 3 year extended power train warranty.

Contact Chuck or Jason in Illinois

1-800-307-0221

crhodes@finkbiner.com jzeibert@finkbiner.com

www.finkbiner.com

Page 8 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Industry Lauds Easing Hours of Service Regulations Under Less Compliance Stress, Truckers, Businesses Can Keep America Moving By Lucy Perry

mit days/hours of operation to allow compliant passage. This regulation can be cumbersome to completing specialTouting its revised Hours of Service ized moves and lifts,” noted SC&RA. (HOS) regulations as providing drivers The American Trucking Association more flexibility, the Federal Motor applauded President Trump’s attention Carrier Safety Administration to the industry. (FMCSA) released a final rule in May. “Today’s rule is the result of a twoIt’s designed to ease HOS rule compliyear, data-driven process and it will ance and takes effect Sept. 29, 2020. result in needed flexibility for While safety advocates have concerns, America’s professional truck drivers trucking industry groups applaud the while maintaining the safety of our new rules. roads,” said ATA President and CEO The rules will provide America’s Chris Spear. “This regulation, which, truckers “greater flexibility to keep while maintaining the core limitations America moving,” said U.S. on drivers’ work and rest cycles, makes Transportation Secretary Elaine L. smart changes to portions of the rules.” Chao. “The Department of The FMCSA’s new Hours of Service rules, which it said provides truck drivers more flexibilThe Owner-Operator Independent Transportation and the Trump ity as it ensures highway safety, become effective this September. Drivers Association (OOIDA) has lobAdministration listened directly to the bied over the years against the existing “On average, crane operators spend only HOS rules, which it believes are not sensible concerns of truckers seeking rules that are the coalition stated. “The agency had failed safer and have more flexibility — and we to address the significant risk to public safety one to two hours of on-duty time each trip for today’s trucking industry. It said the posed by fatigued drivers of CMVs at a time driving a crane to and from a job site; how- Notice of Proposed Rulemaking “represents have acted.” Based on the thousands of comments the when large truck crashes continue to ever, operators have multiple periods of a welcomed shift toward developing regulaunscheduled breaks when they are basically tions that better reflect the realities of truckdepartment received, the reforms are increase.” The Specialized Carriers & Rigging ‘at rest’ or ‘on break,’” for example, waiting ing and improve safety for all highway designed “to improve safety on America’s roadways and strengthen the nation’s motor Association (SC&RA) renewed a five-year for the scheduled time of the lift. users.” The problem for specialized transport carrier industry,” said FMCSA Acting exemption, through 2023, from compliance OOIDA supports the agency’s approach, with the 30-minutes rest break requirement drivers, cited SC&RA, is that despite effec- which it believes will provide drivers “more Administrator Jim Mullen. The HOS rules, first adopted in 1937, in the rule. It applies to qualifying tive planning, delays occur that can affect the opportunities to rest when they are tired, to specify the permitted operating hours of oversize/overweight (OS/OW) motor carri- job when a driver must take a required 30- stay off the road during adverse driving concommercial drivers. In 2018, FMCSA asked ers and drivers operating mobile cranes with minute rest break. ditions, and to maintain greater control over “This burden may put the motoring public their own schedules.” for public comment on portions of the rules, a rated lifting capacity of greater than 30 at risk by causing oversized loads to be and last August the agency published a tons. And, the Truckload Carriers Association “Both specialized transportation and forced to park on road shoulders and exit applauded the FMCSA for receiving input detailed proposed rule that received almost crane and rigging companies regularly find ramps,” the association maintained. 3,000 public comments. from stakeholders to craft flexible regulathemselves addressing hours-of-service “Drivers are also required by law to park tions while improving safety and for expechallenges that can affect public safety as their oversize/overweight load for hours, and diting the changes. “We especially thank the Mixed Reaction Petitions for Reconsideration of the final well as impact operational efficiency,” main- even days, at state lines/borders while they agency for moving forward with additional wait for the next jurisdiction’s OS/OW per- sleeper berth flexibility. While TCA and our rule had to be submitted to the FMCSA tained SC&RA. Administrator no later than July 1. A coalimembers advocate for full flexibility in the tion of safety advocacy groups, with support sleeper berth for our drivers, FMCSA’s new from the International Brotherhood of regulations demonstrate that we are one step Teamsters, addressed concerns about the closer to achieving that goal.” new rule with the FMCSA. A petition filed by the Advocates for Analyzing Revisions Highway and Auto Safety, Citizens for In an article on HOS, Benjamin Ross, Reliable and Safe Highways, Parents attorney with Atlanta, Ga., law firm Fisher Against Tired Truckers, the Truck Safety Phillips, wrote that the rule is a further Coalition and the Teamsters, requests a stay attempt to aggressively promote efficiency of the Sept. 29 effective date of the final rule while maintaining high safety standards. The until the FMCSA administrator can further revisions make significant changes, and review the petition. Ross explains what they mean for the truckThe final rule doesn’t include a proposed ing industry: provision that would have allowed covered The new HOS rule expands the short-haul commercial motor vehicle operators one rest exception to 150 air-miles and allows a 14break of up to three consecutive hours durhour work shift to take place as part of the ing every 14-hour on-duty period. That conexception. The exceptions to the HOS rules cerns the coalition. are the most scrutinized section of the regu“The final rule is not in the public interest lations, writes Ross, because they allow and does not meet the agency’s statutory Trucking and construction equipment organizations, including the Specialized drivers to avoid creating a Records of Duty mission in carrying out its duties to assign Carriers & Rigging Association, applauded the revised rules, which they believe see RULES page 72 and maintain safety as the highest priority,” will make compliance easier on drivers and carriers. CEG CORRESPONDENT

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 9

USE S D EQUIPMENT .com

TRUSTED MACHINES FROM A TRUSTED DEALER. R

2013 CATERPILLAR 12M2, ID# SUC0406, S/N F9M00359, 7311 HOURS ..........................................$99,900

2005 CATERPILLAR 613C, ID# SUR0005, SN 8LJ02797, 2365 HOURS ..........................................$188,100

2014 CATERPILLAR 336FL, ID# QUC0067, SN RKB00473, 5174 HOURS ........................................$112,900

2017 CATERPILLAR 745C, ID# TUC0023, SN TFK01416, 5360 HOURS ........................................$309,900

2019 CATERPILLAR 303.5E, ID# TUC0035, SN JWY05684, 146 HOURS ..........................................$$48,800

2016 CATERPILLAR TL943D, ID# 6CR5986, S/N MLJ00376, 1506 HOURS ............................................$87,230

2012 CASE SV300, ID# SGU0136, SN NCM445322, 2433 HOURS ................................................................$21,500

2014 CATERPILLAR TL1055C, ID# 3AR7479, S/N KDE00928, 4045 HOURS ..........................................$69,920

2018 CATERPILLAR 938MHL, ID# SUC0427, S/N J3R06160, 2554 HOURS ..........................................$174,600

2016 CATERPILLAR 289D, ID# TUC0047, SN TAW04174, 2722 HOURS..........................................$42,100

2015 CATERPILLAR 623K, ID# TUC0081, S/N WTB00160, 3896 HOURS ......................................$475,000

2016 CATERPILLAR 299D2, ID# 6CR5996, SN FD201319, 3457 HOURS ..........................................$43,500

2014 CATERPILLAR D8T, ID# QUC0061, SN FCT01311, 5461 HOURS ........................................$317,900

2018 CATERPILLAR 236D, ID# 8CR6472, SN BGZ04027, 744 HOURS ............................................$36,400

2015 CATERPILLAR TL1255, ID# 4AR8246, SN DHW01396, 4387 HOURS........................................$73,970

2009 CATERPILLAR 938H, ID# SUC0351, SN MJC00680, 17066 HOURS ........................................$42,800

Page 10 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2015 Bobcat S595 - Call for Details

Bobcat Excavators in Stock, Call for Pricing

Bobcat Toolcats In Stock

Doosan DX140LC Excavator Available for Rent

Largest Selection in the Midwest! ®

Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000

Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500

Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000

2015 Bobcat T770 - Call for Details

Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Authorized Bobcat Dealer

U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 11

NORTH DAKOTA TA Williston 701.577.1249 Bismarck 701.250.4882 Fargo 701.271.2360 TENNESSEE Kno oxville xville 865.525.1845 Chattanooga 423 308 7940 423.308.7940 NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710 SOUTH CAROLINA Piedmont 864.704.1060 Columbia 803.791.0740 Charleston 843.414.1120 GEORGIA Buford 678.318.9500 Savannah 912 964 8079

POWERFUL EXCAVA AVATORS FOR YOUR TOUGGHEST JOBS. JOBS

Macon 478.200.3300

Sttay up and running with high-quality machines m and unrivaled support. Exp perience reliable power, power efficiency and performance from m the industry industry’ss best cabs. cabs Our Volvo excavators are e designed to reduce fuel consumption and maximize uptime to help you lower your operating costs — and d you can work confidently knowing your Ascendum team is always there when you need us. Talk T alk k to t us today and learn how Volvo excavators can deliver more reliability on the job and boost your botttom line. Contact your nearest Ascendum location today.

ascendummachinery.com ascendummachinery.c . om .c

Page 12 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RCE Equipment Solutions AnnouncesNew Railavator Series RCE Equipment Solutions, a railRCE Equipment Solutions, a railroad maintenance equipment manufacturer, has road maintenance equipment manua new series of Railavators available: John Deere models 210G, 245G and 250G facturer, has a new series of high-rail excavators. Railavators available: John Deere models 210G, 245G and 250G highrail excavators. RCE stated that the Railavator — high-rail excavator — is its most popular machine due to its quality and versatility. With its hydraulic powered retractable highrail, customers can take it anywhere they need it on and off track. The new series Railavators boast RCE’s new Ultra Life Axles. These final drives are made of high-strength alloy steel — two times more structural strength than existing cast iron final drives, according to the manufacturer. Many rail maintenance operations require severe duty applications with high-point loading. The Ultra Life Axles have overall increased axle bearing capacity and are rebuildable/repairable. The Ultra Life Axles have a three-year, unlimited hours warranty. The new series of Railavators have many design enhancements, including a new hydraulic system. There are more components in the common manifold, which means less hoses, less separate components and less joints to potentially leak. The F-NR valves are now pilot operated instead of electrical coils, which makes for a more reliable design, according to the company. The RCE team also updated the Railavator structure, including the high-rail linkages and supports, extending support gussets and adding weight to the links and frames. These modifications reduce frame flexing and potential cracking, according to the company.. The main drive frame is aligned in all The new series 210G, 245G and 250G Railavators boast RCE’s new Ultra Life Axles. axis’ for drive components. The drive axle These final drives are made of high-strength alloy steel. mounting has been changed for more strength and durability, as well as the axle mount and front/rear bumpers and tow points. The improved rotary manifold has a higher pressure rating and longer life, according to the company. A push button monitor controls the high-rail and all available attachments from inside the cab. The new series of Railavators are in-stock at the RCE Rockford, Ill., manufacturing facility and available for purchase, lease or rental. Adjustable Lower Track Frames The 50G, 85G and 135G Railavators feature an adjustable lower track frame. When retracted, the machine is under the legal size for transit without a required permit. In work mode, the hydraulically operated frame expands to straddle the track.

The new series of Railavators have many design enhancements, including a new hydraulic system.

All Makes Rail Gear RCE provides all makes high-rail gear for Komatsu, Caterpillar and John Deere 22-ton excavators. The high-rail gear is RCE's hydraulic high-rail system. The 22-ton class Railavator is ideal for rail maintenance applications like rail laying, tie handling, scrap pick-up, ballast and site preparation and under cutting. The rail gear package can be fitted with features and designed to simplify service and minimize downtime and expense. Attachments Railavators are the swiss army knife of MOW equipment and can be equipped with more than 20 attachments. About RCE Equipment Solutions RCE Equipment Solutions is a diversified manufacturer that produces construction equipment for the rail and energy sectors. At RCE, customization is key. RCE employs a full-time, on-site engineering team with more than 20 years of equipment development experience. The team has designed and put into production more than 30 highly-specialized machines for rail maintenance tasks, primarily highrail excavators (Railavators) equipped with custom attachments. The RCE team also has designed specialty products and tools for the energy sector, including unique grapples, booms and large drills. All equipment is emissions compliant and customizable. For more information, visit rcequip.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 13

563-8 872-4 4112 112

Bellevue (Dubuque), Iowa sales@jjjscheckel.com RENT OR

BUY!

2005 CA ATT D10T - $388,000 $3888,000

2006 CA ATT D10T - $358,000 $ ,

RJG S#, 1 Owner since new w,, LLow to midlif dl ffee componen p t RJG S#, 1 Owner since new w,, Low L too midlif dl ffee componen p t hours, SS ripper pp r,, U blade, blade Twin tilt, Well maintained, i i d hours, SS ripper d pp r,, U blade, blade Twin Twin tiltt, Well maintained, i h and reputable machine. Priced to sell. Clean, straight, Clean, straight, i h and reputable macchine. Priced to sell.

2004 CA ATT D10TT - $350,000 $ ,

RJG Series, 23,037 hhours, 4,701 4 idle dl hhours, SSingle shank ripper pp r,, U blade with th twin t Tilt. A/C, Heat. AT dealer d l maintained, Seerviced and rready CAT eady to t go.

2010 CA ATT D9T - $$175,000

Easyy duty ppower plant machine. h 49,000 Total T l hours, 30,206 neutr SU Blade, Rear cwt. 30 206 hours h were w inn neutral. Selling wholesale, no work orders performed formed.

RENT OR

BUY!

2005 CA ATT D8T - $228, $$228,000 , ,000

8,200 Hours, Liffetime etime ser service history, h y, Topc p on GPS dde, EExcellent comes with machine, MS ripper pp r,, SU bl bla blade i as nice as they come. underrccarriage, Originall paint,

1996 CA ATT D8R - $128, $ ,000

2018 CA ATT 390FL - $68 688,000

2017 CA ATT 374FL - $44 448,000

RENT OR

BUY!

(5)2014 CAT 740B’s - $248 2 ,000 EA. 66,500 500 Hours, Original paint, Service hist h ory, Oil samples l , Fullll workk order d r complet l edd. Goodd tiri es, Work ready e . Rent//Lease or Buy.

WE OWN WHA ATT WE W ADVERTISE!

2015 CA ATT 390FL 3 - $448,000 ,

300 Hrs on dealer engine ngine g rebuild b ild, Reputa R tion, 1owner machine, hi 10 10,150 1550 TTotal hours, Super p straigh g t, Clean, original. 9’7”” St Stick, Hyd cntrwgt., 96”” BBucket. k

RENT OR

2013 CA ATT 329EL EL - $139,000 ,

4,700 Hours, New 54”” buck cket k , 10’6”” SStick, i k Fullyy

loaded, Longg and Wide UC, Patt P ern changer g r,, Ex Excellent ll

condition, OOriginal paint. Rent/Lease /L or Buy.

BUY!

2015 CA ATT 980M 9 - $228,000 ,

(4)2013-2016 CAT 740B’s $168,000 000 - $188,000 188,000 EA. 188

2006 CA ATT 825H - $385,000

9,614 Original g Hrs, AAgg ggggrrega ega g te handler h dler pkg, M Matchingg 800 Hrs on CAT AT-ddealer l complet pl e powertrain rebuilddi l 7 YYdd. GGPP buck k RRide ide ccontrol, On boarrdd engine i Excellent E ellen feet. Original Michelin radials, bucket, g , torqque, transmisison. tr g scale. Clean. Good hhistory. Rent/Lease or Buyy.. paint. i Tilt blade bl de, Excellent! Rent/Lease or Buyy..

RENT OR O RENT OR

BUY!

2012 Komats atsu t PC800LC-8 - $388 $388,000

Reputa p tion 1-ow wner machine, Full historyy since new w,, 400 Total 11’100”” Stick. 10,0,400 T hrs, Str S aigh g t, clean, fresh ppaint.11’ S Quick couplerr,, 66 66”” Bucket, B k New trackk groups, 36”” pads pads.

RENT OR

BUY!

7,200 Original g hrs, Reputa p tion machinne, Straigh g t, 4,400 Hrs. 2 Year Year par p ts/labor CAT AT w warrantyy. 26’’ BBoom, 11’110”” SStick i k, 72”” Bucket, l 1 owner conndition, Full F service clean, original gi l. 11’10” B Goodd U/C w/ 14’’ Stick, S Super p clean 32”” tr trackk pads. history andd oilil samples. d Komatsu dealer tested & inspected. l Rent//Lease or Buy.

Pkg. 0 hr Powertrain w/ 3yr/5,000hr OEEM CAATT wrnty. New U/C. Pre-emissions, U-blade, Erops, Diff steerr..

for detailed d photos, p videos id s,, andd d descrip iptions! RENT OR

BUY!

POWERTRAIN PLUS REBUILD

8,500 Hours, 2,700 700 at a idle. CAT AT Acc A ugr g ade ad , AROO, O, GPS readyy. Erops p , A/C, DDiff steerr,, GGoodd undercarriage g. Original, c machine. Rent/Lease or BBuyy.. i l super clean

JJScheckkel.com

RENT OR RENT OR

2007 CA ATT D8T Powertraain Plus Rebuild - $388,000 Landfill Waste Handler

BUY!

2015 CA ATT D6T LGP P,, VP PAT - $$248,000 , 2012 CA ATT D6T XW VP PA AT - $$165,000 , 2012 CA ATT D6T LGP VPAT - $148,000 ,

3,200 Hrs. 2 Year par p ts/labor CAT AT warranty w y. 27’ Boom. 5,520 hours, SUU bl blade d w// tilt il , M Multi l i shhhankk ripper ipp r,, l 1 owner conndition, Full F service 14’’ Stick, S Super p clean di i Erops rops p , A/C, Diff steerr,, HHood sweeps p . Origi iginall condition, history andd oilil samples. l Rentt/Lease or Buyy.. i history since i new. OOriginal paint. Dealer service h

2006 Komatsu PC800LC-8 - $36 $368,000 ,

BUY!

vissit

BUY!

RENT OR

Low hours on powertrain rebuild, SU blade, Drawbarr,, 4,315 Hrs, 1,308 Idle hrs, AROO CAT C Accugr g ade d GPS ready dy,, 6,250 Hrs, 1,472 idle, ARO A CAT Accugr g ade d GPS Ready. OOppen canopy bll d . Straight S ih py,y, Diff D steerr,, Excellen Ex nt undercarriage, Rear ripper pp r,, Er E ops p , A/C, Diff steerr,, VPAT PAATT 6 way w y blade d, Erops, A/C, Diff Steerr,r, VPPAAT 6-wayy blade Reputation me. Rent/Lease or BBuyy.. and clean. Rent/Lease R or Buy. i machine from midweest dirt contractorr.. Machine M hi isi goodd as they com B

RENT OR

2009 CA ATT D6T XW - $148,000 $1448,000 ,

2015 CA ATT D8T - $295,000 ,

6,400 total framee hrs, 1,861 att idle, only l 4,539 actual oper p atingg hrs. SUU Blade, B MS Ripper pp r,, EErops, DDiff iff steerr,, P i Service history since i new. Rent/Buyy.. Ori i l Paint, Original

RENT OR

BUY!

(4)2014-2015 015 Volvo A40G’s $$228,000 , - $248,000 $ , EA.

2014 CAT 627K - $345,000

8,400 Hours, Jusst in from originall owner, Pushh Pull, inall pain i t, 33 33.25+29 25+29 Rubber, Clean l 11,500 Hours, Dealer maintaainedd, Service history, Oil 5,300-7,300 hrs, Originnall paint, EExcellen ll t radial d tires, Erops, A/C, Original scr aper, Full histor o y, ready d to go. Rent/Lease or Buy. samples, Full work order done ne. Good tires, Tailgates. Factory tailgates, 1 owner. Rent/Lease or Buy.

J.J. SCHECKEL REN R TS

1, 3, or 6 Month Contracts ontracts at discounted rates. Rent/Purchase ase Options.

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com @jjscheckel.com scheckel com | follow us for forr daily updates:

Page 14 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JCB Secures New Military Equipment Fleet Contract JCB has been awarded a contract to supply the U.S. military with a fleet of specialized high speed excavators over the next eight years in a deal worth up to $269 million. The deal centers on the supply of High Mobility Engineer Excavators (HMEEs) for the U.S. Army and U.S. Marine Corps. Prototypes of the machine — capable of speeds up to 55 mph (88 kmh) — were first developed in 2002 specifically for the U.S. Army to meet its demand for a high-speed backhoe loader capable of undertaking military engineering tasks. In 2005, JCB won the first multi-year production contract valued at approximately $209 million, with an additional service contract worth approximately $20 million. Subsequent contract extensions and international sales have boosted production to 1,200 machines for the U.S. and allied nations. It was confirmed on July 6 that a new contract has been signed for the supply of up to 400 HMEEs, which will all be manufactured at JCB’s North American headquarters in Savannah, Ga. In addition to the base unarmoured variant, JCB will be providing armoured variants as well as attachments and service support.

JCB North America President and CEO Richard Fox-Marrs (R) and JCB Vice President of Government and Defense Chris Giorgianni (L), along with the JCB Government and Defense team, look on as Viengkeo Johnson, contracts manager of JCB, signs the new contract to produce a fleet of specialized high-speed excavators over the next eight years for the U.S. military in a deal worth up to $269 million.

Chris GiorgianniGraeme Macdonald, JCB CEO said, “When it was developed, the HMEE revolutionized the way military tasks were carried out and we are delighted that the U.S. military has shown great faith in the project by placing this new order.” “To win this eight year contract is fantastic news for JCB’s North America Headquarters, which has been manufacturing HMEEs here for the past 13 years,” said Richard Fox-Marrs, JCB North America

president and CEO “The U.S. military has shown tremendous confidence in this JCB product which speaks volumes for the team behind its design, engineering, manufacturing and after sales support.” The HMEE combines the capabilities of the JCB backhoe loader and the high-speed JCB Fastrac — one of the world’s fastest tractors, which has full suspension and antilock brakes. The objective of the HMEE concept is to

have a machine capable of travelling at military convoy speed without the need for transportation by a truck and low-loader trailer. “The JCB Government and Defense team is proud to continue to support the U.S. military through the extension of the HMEE program, said Chris Giorgianni, vice president of Government and Defense at JCB North America. “The fact that the U.S. military has entrusted JCB to manufacture the HMEE for over a decade is a testament to the work the entire team here has accomplished. We look forward to furthering the HMEE program and working with the U.S. military on future projects.” The 17.5 ton, 6.7 L engine machines are well suited to a range of military and disaster relief missions, including earthmoving, fortification construction and ground clearing. In addition to its top speed of 55 mph, the HMEE is certified for military transport on ships, rail and aircraft, and for airdrop operations. It is available in various configurations including an armoured specification. It is four-wheel drive, four-wheel steer, can lift more than 2 tons and dig to a depth of almost 13 ft. For more information, visit www.jcb.com. 

Runnion Equipment Expands LBX Announces New Warranty Its Sales Team With John Pielli for Its Link-Belt X4 Excavators Runnion Equipment Company is John Pielli growing its sales team with the addition of John Pielli. Pielli has almost 30 years of crane experience both as a mechanic and salesman, working previously for Hiab. He will be focusing on the northern Illinois area, making sure that his customers have the equipment they need to get their jobs done on time and in budget. With Pielli’s extensive industry background and Runnion Equipment Company’s wide variety of telescoping and articulating boom trucks, aerial lifts and truckmounted forklifts, customers will be well served, according to the company. “The company and employees are all welcoming and very helpful,” said Pielli. “I can’t wait to build new rela- “With twenty-one years as a mechanic and more than seven years in sales, John has an tionships and reunite with old ones.” “We are incredibly excited to have John intimate knowledge of lifting equipment, on board and working for Runnion which allows him to provide a unique perEquipment Company,” said Brad Runnion, spective that will help deliver creative solusales manager of Runnion Equipment. tions and real value to our customers.” 

The new X4 standard warranty gives customers peace of mind by helping protect their equipment from unforeseen expenses created by repair costs and/or downtime.

LBX Company LLC, Lexington, Ky., announced standard full-machine warranty terms of 5 years or 5,000 hours on new LinkBelt X4 excavators purchased after July 1, 2020. This warranty package also includes a 5-year/10,000-hour XtraStructure warranty. The new X4 standard warranty gives customers peace of mind by helping protect their equipment from unforeseen expenses created by repair costs and/or downtime. The warranty also is transferrable through the warranty registration process, according to the company.

“The decision to expand our warranty represents a unique opportunity for LBX and our dealers to be the industry leaders, with a powerful warranty package that fully supports our long-term growth strategy,” said Rod Boyer, vice president, customer support. “This is a very strong statement on the inherent quality of our products.” Does not apply to all models or applications. For more information, visit https://en.lbxco.com/warranty/. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 15

JD 410E, 40 Ton, JD 544K, Air, Coupler, Cat D6N, LGP, PAT JD 644K, Cab, Air, QC, JD 750K, LGP, 156” Tailgate, Warranty, Ride, 3FN Aux, #117691 Blade, Ripper Valve, 3 Spool Aux, #108584 .. PAT Blade, 34” Pads, ......................$109,000 #105154 ..........$88,500 #116045..........$224,000 ......................$134,000 #115888..........$114,500

JD 200CLC, 9’ 6” Arm, 32” Pads, #101510........ ........................$72,500

Bomag BW211-40, 84” JD 410K, Cab, Air, 4x4, JD 350DLC, 10’6” Arm, JD 210GLC, 9’7” Arm, Smooth Drum, #106096 Ext Hoe, Ride, #110175 Aux Hyd, #108809 ........ 32” Pads, Hyd Thumb, ........................$69,000 ........................$59,500 ......................$104,000 #112879..........$129,500

JD 772G, Tall Cab, Air, 14’ Blade, #93273 ........ ......................$119,000

NPK Hammers, All Sizes for All Makes. JD 700J, LGP, 30” Pads, JD 744K, Cab, Air, Inspected and Well Coupler, GP Bucket, 132” PAT Blade, Maintained, GH4 – #106080 ..........$89,750 #111720..........$139,500 GH18

JD 672G, Low Cab 14’ Blade, #102755 ............ ......................$134,000

JD 770CH, Low Cab, JD 135D, Hyd Thumb, JD 750J, LGP. 156” Harlo HP6500, Orops, Air, 14’ Blade, Ripper, 9’ 11” Arm, 24” Pads, PAT Blade, 34” Pads, 4x4, 21’ Mast, 6,500lb #117348 ............$89,000 #105867 ..........$74,500 #110776............$77,750 Cap, #107216 ..$39,000

JD 310SK, Cab, Air, 4x4, Ext Hoe, Aux Hyd, #106433 ..........$54,500

Page 16 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113

GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449

www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 17

2018 Case 580SN, 995 HRS, EQ0009659, Garden City, KS ....................................................$82,500

2019 Case TR270, 23.7 HRS, EQ0009453, Kansas City, MO ....................................................$48,900

2014 Case SR210, Mechanical H Pattern, 1,000 HRS, EQ0003198, Garden City, KS ..........$31,850

2014 Case 621F, Zbar, 1995 HRS, EQ0003141, Garden City, KS........................................$125,000

2006 Case 580M II Loader/Extendahoe, EQ0010281 in Garden City, KS. ................$29,500

2012 Case SV250, 2,189 HRS, EQ0008990, Kansas City, MO ........................................$19,500

2015 Case 580SN WT, Pilot Controls, 1180 HRS, EQ0004234, Kansas City, MO ..................$79,000

2014 Case CX300C, 2010 HRS, EQ0003165, Kansas City, MO ..................................................$174,900

Page 18 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 19

#80639 2002 CAT 140H VHP, CAB | A/C | 14’ MOLDBOARD | 5,500 HOURS................$135,000

#92776 2014 TAKEUCHI TL12, CAB | A/C | HEAT | HIGH FLOW UNIT | 2,100 HOURS ........$50,500

#83226 2016 KOMATSU HM300-5, CAB | TAILGATE | 2,100 HOURS..........CALL FOR PRICE

#82962 2014 KOMATSU HM400-3, CAB | TAILGATE | AUTO GREASER | 3,800 HOURS ........ ..................................................CALL FOR PRICE

#92483 2012 KOMATSU PC490 LC-10, CAB | A/C | AUX HYDS | JRB QC | 6,300 HOURS .......... ..............................................................$179,500

Page 20 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wisconsin Budgets Takeuchi Announces EquipmentShare Upwards of $160M in as Its Newest Dealer in Columbia, Mo. Transportation Aid Gov. Tony Evers and Wisconsin Department of Transportation (WisDOT) Secretary-designee Craig Thompson on July 7 announced more than $160 million in transportation aid for local governments as part of the governor’s 2019-21 biennial budget. Local governments will receive quarterly payments totaling $160,249,246 for General Transportation Aids (GTA), Connecting Highway Aids and Expressway Policing Aids from the WisDOT. “As our economy continues to recover from the effects of this pandemic, it is critically important for us to invest in our state’s infrastructure,” Evers said. “After years of neglecting our roads and bridges, The People’s Budget made historic new investments to provide the 21st-century transportation system we need in order to thrive. Funding for local roads is an important part of economic development in our state, whether it’s getting to work or school or transporting goods to market — an investment in infrastructure is an investment in our state’s economy for years to come.” The local assistance increase is part of more than $465 million in new funding for transportation projects included in the governor's 2019-2020 state budget, the largest dedication of new, ongoing revenue to the transportation fund in a generation. The budget included $320 million in new funding for the State Highway Rehabilitation program, $1.9 million more for local roads, and provided $75 million in one-time funding for the Multimodal Local Supplement grant program. “General transportation aids are a significant portion of the money local communities need to maintain their roads,” said Thompson. “Maintaining our local roads is a vital part of WisDOT’s mission.” For calendar year 2020, local governments will receive more than $505 million in general transportation aids financial assistance to support transportation related projects. This is a 10 percent increase over calendar year 2019 allocations. In addition, $2.5 million also was allocated to towns that are limited by the 85 percent of three-year average cost limitations under the general transportation aids program. Payments to Wisconsin’s 1,850 villages, towns, and cities include: • $156,977,397 in General Transportation Aids; • $3,015,875 to municipalities eligible to receive Connecting Highway Aids; and • 255,975 to Milwaukee County for Expressway Policing Aids. General Transportation Aids help cover the costs of constructing, maintaining, and operating roads and streets under local jurisdiction. Connecting Highway Aids reimburse municipalities for maintenance and traffic control of certain state highways within municipalities. Quarterly payments for cities, towns, and villages are sent the first Monday in January, April, July and October. County payments are made in three installments, with 25 percent of the total annual payment on the first Monday in January; 50 percent on the first Monday in July; and 25 percent on the first Monday in October. For more information, visit wisconsindot.gov. 

Takeuchi-US has introduced EquipmentShare as a new dealer. Located in Columbia, Mo., it will be selling the full range of Takeuchi track loaders, excavators and wheel loaders. In addition to stocking parts, this location also will be an authorized Takeuchi equipment repair center to support new and existing customers. Established in 2014, EquipmentShare provides multiple lines of equipment manufacturers for a wide variety of customers, from large commercial construction to local contractors. “We’re very familiar with the EquipmentShare will be selling the full range of Takeuchi track loaders, Takeuchi brand,” said Jabbok excavators and wheel loaders. In addition to stocking parts, this location Schlacks, president at also will be an authorized Takeuchi equipment repair center to support new EquipmentShare. “Takeuchi and existing customers. products continue to gain momentum in the market, and customers industry veterans that have decades of customers in Columbia. We are excited have come to love their products for experience,” said Henry Lawson, to work with EquipmentShare and their durability and operator comfort. director of sales at Takeuchi-US. “We fully believe our products will do well We are excited to feature them at our have the utmost confidence they will in the area.” Columbia location.” do a great job for Takeuchi, not only For more information on Takeuchi, “EquipmentShare was founded by with our products but supporting our visit www.takeuchi-us.com. 

AEM Applauds Introduction of Legislation to Strengthen Manufacturing in America Association of Equipment Manufacturers (AEM) president Dennis Slater issued the following statement supporting introduction of legislation to strengthen manufacturing by U.S. Senator Gary Peters of Michigan: “The Association of Equipment Manufacturers commends the introduction of the National Institute of Manufacturing Act to strengthen the manufacturing sector and ensure the future competitiveness of U.S. manufacturing in the global economy,” said Dennis Slater, president of AEM. “Equipment manufacturers represent 12 percent of the entire U.S. manufacturing sector and supports 2.8 million family-sustaining jobs across the country. We need a comprehensive, coordinated and competent national effort in support of the manufacturing sector and its workforce. “This legislation will reduce redundancies and improve efficiencies

across existing federal manufacturing programs and ensure that the federal government is better positioned to respond to rapid changes in the global manufacturing landscape. “Senator Gary Peters knows firsthand the challenges and opportunities facing equipment manufacturers, and he has been a steadfast advocate for the industry in the United State Senate. We applaud the Senator for his vision and leadership to ensure the federal government is better positioned to support the industry and urge all Democrat and Republican Senators to support this important legislation.” “With a long and rich history of manufacturing hundreds of world class products in Winn, Michigan, we know first-hand the critical role that manufacturing plays as the engine that drives the economy by creating jobs, opportunity, and prosperity for Americans,” said John Foote, senior vice president at Morbark.

“This has been especially true in our rural central Michigan area. We also recognize the need for a more farreaching and strategic approach to ensure that the manufacturing sector and its workforce receives the resources and leadership they need to continue to innovate and manufacture in Michigan and across the United States. “We would like to thank Senator Gary Peters for his steadfast leadership to strengthen the sector and ensure the future competitiveness of U.S. manufacturing in the global economy. Senator Peters has personally met with us in the past, listened to our needs and responded proactively. We hope that his colleagues in the United States Senate will support his legislation and work in a bipartisan and collaborative fashion to make America the best country in the world to manufacture.” For more information, visit www.aem.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 21

Contact Rollie Aspenson (Used Equipment Manager)

at 608-220-1723 rollieaspenson@ brookstractor.com

See our entire inventory at www.brookstractor.com Six Locations in Wisconsin to serve you! Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Plover (Stevens Point) • Mt. Pleasant (Racine) 2015 JOHN DEERE 160G

2013 JOHN DEERE 850K

2015 CATERPILLAR 323F

Stk #C91695, Cab w/ AC, Long Arm, Standard Boom, Long Track, Wide Pads, 28" Pads, Aux Hydraulics, Coupler, Less Bucket, 1601 hrs ..............$139,900

Stk #C94337, Cab w/ A/C, Low Ground Pressure, 36” Pads, 168” Blade, Drawbar, 7,372 Hrs .............. ............................................................$135,000

Stk #C94159, Cab w/AC, Cntrl Pattern Select, Long Arm, Standard Boom, Wide Pads, Aux Hyds, Coupler, Hyd. Thumb, 42" Bucket, 1971 hrs ........$169,000

2017 CASE 650L

2012 CATERPILLAR D6T

2013 JOHN DEERE 450J

Stk #C95310-1, Cab w/ AC, Wide Track, PowerAngle-Tilt, PAT Blade, 289 Hrs ..................$79,500

Stk #C94476, Cab w/ AC, Lever Steer, Low Ground Pressure, 32" Pads, Torque Convtr Trans, 165" Blade, Ripper, 6515 hrs ........................$165,000

Stk #C94120, ROPS, Low Ground Pressure, 24" Pads, Power-Angle-Tilt, 115" Blade, 1540 Hrs .......... ..............................................................$59,500

2015 JOHN DEERE 624K

2016 NEW HOLLAND C238

2017 JOHN DEERE 672GP

Stk #C91780-2, Cab w/ AC, Quick Coupler, Ride Control, Dual Diff Locks, 20.5 Tires, General Purpose Bkt, 1940 hrs ..........................$147,000 WITH WARRANTY

Cab Enclosure, A/C, EH Controls, Air Ride Seat, Aux Hydraulics, Ride Control, 2 Speed, Wide Rubber Tracks, General Purpose Bkt, 78" Bucket, 1140 hrs ................................................$47,000

Stk #C93381-2, Cab w/ AC, Tall Cab, EH Controls, 14' Blade, 17.50 Tires, Radials, AWD, Aux Hyds, Front Scarifier, Ripper, 1489 hrs ............$249,000 WITH WARRANTY

We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.

Page 22 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar 992G Wheel Loader, 1:50 scale - $100

Caterpillar D7E Track-type Tractor w/ Pipe line configuration, 1:50 scale - $115

Caterpillar AP-1050 Asphalt Paver, 1:50 scale - $100

Terex 33-07 Quarry Truck, 1:40 scale - $125

Caterpillar 14M Motor Grader, 1:50 scale - $100

Caterpillar 836G Landfill Compactor, 1:50 scale - $85

Caterpillar 245 Excavator, 1:50 scale - $100

John Deere 850C Dozer, 1:50 scale - $50

Allis Chalmers Forty-Five Grader, 1:50 scale - $75

Caterpillar 777D Off-Highway Mining Truck, 1:50 scale - $85

John Deere 400D Articulated Dump Truck, 1:50 scale - $40

Caterpillar 323F Excavator w/thumb, 1:50 scale - $80

JCB TLT25D Teletruck High Lift, 1:35 scale - $40

Caterpillar D5G XL Track-Type Tractor, 1:50 scale - $70

Volvo L60H Wheel Loader, 1:50 scale - $75

Caterpillar CB-534D XW Vibratory Asphalt Compactor, 1:50 scale - $60

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Email – bmckeon9@gmail.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 23

Sale es • Rentals • Parts • Service • Fiinancing

2016 Komatsu D65PX-18 D KM16294X X

$219,500 5,,800 hrs.

2018 Komatsu WA500-8 A

2015 Wirrtgen WR200XLI

KM18 8423X

W WR15004X

CT14025X

$369,500 0 904 hrs.

$279,5 500 2,300 hrs.

$21 19,750 2,600 hrs.

2006 Koma atsu D41E-6

2014 Kom matsu D39PX-23

2014 Komatsu 2 PC360LC-10

6518X 3,904 hrs.

K KM14199X

$89,5 500 2,700 hrs.

2014 C Caterpillar D6T XW

2015 Komatsu PC138USLC-10

KM14056X

KM15152X

$13 32,500 5,500 hrs.

$109,500 3,610 hrs.

2017 Deere 644k

2013 Caterpillar 320E

2001 Caterrpillar 972G

2015 Kom matsu WA270-7 A

2016 Komatsu K WA470-8 A

CT13008X X $102,750 6,,388 hrs.

CT01023X $64,500 31,588 hrs.

KM15410M K $114,5 500 3,900 hrs.

KM16433X

JD17003X

$15 52,000 7,045 hrs.

$119,500 7,094 hrs.

2014 Kawasaki 80Z 7

2017 Deerre 310LEP

2012 Joh hn Deere 772G

2014 4 LeeBoy 8510C

2015 15 Komatsu HM400-5

KC14029X $59,500 12,046 hrs.

JD17 7010J $69,500 1,400 hrs.

JD12015X J $119,5 500 6,140 hrs.

LB14006X $79,500 2,217 hrs.

$459,500 7,800 hrs.

KM15268M

All sales are subject to availability at time of order, prices do o not include taxes or other applicable e fees. Kirby-Smith Machinery Inc. doesn’ oesn’t engage in exports to embargoed oed countries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Worth o • Kansas City • Lubboc ck • McAlester • Odessa a • Wa aco • Oklahoma City ity • St. Louis • Tulsa u

Contact Terry e y Ly yness s for details s and p pricing. ng. Follow us on

877.54 49.7501

www.kirby-smith.com mith.com

Page 24 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 25

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

Page 26 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 27

Mid Country Machinery

3478 5th Ave. S. • Fort Dodge, IA 50501 (515) 574-2302

4734 Sergeant Rd. • Waterloo, IA 50701 (800) 206-5936 (319) 234-8710 www.midcountrymachinery.com

2019 KOBELCO SK 140SR

2019 JOHN DEERE 317G

2018 HITACHI ZW80

2014 CAT D6N LGP

106 8th St. • Sergeant Bluff, IA 51054 (712) 943-4470 3509 Franklin St SW • Bondurant, IA 50035 (515) 410-9900

2018 CATERPILLAR 966M

2018 DEERE 700K LGP

EXCAVATORS

WHEEL LOADERS

DOZERS

2020 SANY SY500, *NEW* ..........................$CALL 2020 LBX 245X4, *NEW* ............................$CALL 2020 KOB SK350LC-10, *NEW* ....................$CALL 2020 KOB SK300LC, *NEW* ........................$CALL 2019 LBX 490X4, *NEW* ............................$CALL 2019 LBX 350X4, *NEW* ............................$CALL 2019 LBX 300X4, *NEW* ............................$CALL 2019 LBX 210X4, 5 UNITS *NEW* ..................$CALL 2019 LBX 160X4, 322 HRS ..........................$CALL 2019 LBX 145X4, 3 UNITS *NEW* ..................$CALL 2019 LBX 75X3, *NEW* ..............................$CALL 2019 KOB SK350LC-10, *NEW* ....................$CALL 2019 KOB SK270SR, *NEW* ........................$CALL 2019 KOB SK210LC, 4 UNITS *NEW* ..............$CALL 2019 KOB SK170LC-10, *NEW* ....................$CALL 2019 KOB SK85CS3-E, 3 UNIT*NEW* ..............$CALL 2019 SANY SY135, 2 UNITS *NEW* ................$CALL 2019 SANY SY95, 3 UNITS *NEW* ................$CALL 2018 KOB SK350LC-10, 2 UNITS ................$269,000 2018 KOB SK300LC-10, 898 HRS ..............$220,000 2018 KOB SK210LC-10, 2 UNITS ....................$CALL 2018 LBX 145X4DZ, 1203 HRS ......................$CALL 2017 KOB SK300LC-10, 757 HRS................$210,000 2017 SANY SY235CLR, 2457 HRS ..................$CALL 2016 LBX 350X4, 2091 HRS ....................$199,000 2016 LBX 300X4, 3342 HRS ........................$CALL 2016 LBX 210X3, 1141 HRS......................$130,000 2016 KOB SK350LC, 1700 HRS ..................$210,000 2016 KOB SK260LC, 852 HRS....................$180,000 2016 KOB SK85CS-3E, 726 HRS ..................$89,000 2016 SANY SY235CLR, 3133 HRS ..................$CALL 2015 CAT 326FL, 4280 HRS ......................$152,500 2015 KOB SK350LC, 2288 HRS ..................$190,000 2015 KOB SK210LC-9, 1092 HRS................$149,000 2014 DEERE 210GLC, 2806 HRS....................$CALL 2014 DOOSAN DX140LC, 2800 HRS ..............$68,500 2012 CAT 319DL, 3546 HRS ......................$115,000 2011 DEERE 200D, 6229 HRS........................$CALL 2009 KOB SK70SR, 5553 HRS ....................$32,500 2006 CASE CX210, 6155 HRS........................$CALL 2005 VOLVO EC460 ................................$38,500 2005 DEERE 160CLC, 5099 HRS....................$CALL 1996 HITACHI 200LC-2, 3524 HRS ..................$CALL 1996 HYUNDAI 210LC-3 ..............................$CALL

2020 HITACHI ZW80, 5 UNITS ......................$CALL 2019 DEERE 344L, 59 HRS ..........................$CALL 2018 HITACHI ZW180-6, 550 HRS ..............$165,000 2018 HITACHI ZW150-6, 287 HRS ..............$155,000 2018 CAT 966M, 1350 HRS ..........................$CALL 2018 CAT 926M, 2 UNITS ............................$CALL 2018 CAT 906M, 3 UNITS ............................$CALL 2017 CASE 521F, 235 HRS ..........................$CALL 2017 DEERE 624K, 453 HRS ........................$CALL 2015 KAWASAKI 67Z7, 988 HRS ................$120,000 2015 CAT 950M, 1146 HRS ..........................$CALL 2015 CAT 930K, 4547 HRS ..........................$CALL 2015 CAT 938M, 268 HRS ........................$182,500 2015 DEERE 544K, 2892 HRS........................$CALL 2014 CAT 938K ........................................$CALL 2014 DEERE 644K, 4470 HRS........................$CALL 2013 KAWASAKI 60ZV2, 3163 HRS ..............$62,500 2013 DEERE 524K, 5140 HRS........................$CALL 2000 DEERE 544H ....................................$CALL 1994 CAT 950F, 7527 HRS............................$CALL

2019 DEERE 700K, 234 HRS ........................$CALL 2019 DEERE 650K LGP, 243 HRS....................$CALL 2018 DEERE 700K, 641 HRS ........................$CALL 2018 CAT D6K2 LGP, 215 HRS ......................$CALL 2018 KOMATSU D51PX, 532 HRS ..................$CALL 2016 CAT D6K LGP, 5776 HRS ......................$CALL 2016 CAT D4K2 LGP, 2300 HRS ..................$95,000 2015 CAT D6K2, 2818 HRS ..........................$CALL 2014 CAT D6T XL, 2 UNITS ..........................$CALL 2014 CAT D6T LGP, 4 UNITS ........................$CALL 2014 CAT D6N LGP, 3193 HRS ......................$CALL 2013 CAT D6T XW, 3637 HRS........................$CALL 2013 CAT D6T LGP, 5030 HRS ......................$CALL 2013 DEERE 650K XLT, 2 UNITS ..................$59,000 2013 CAT D5K2 LGP, 3619 HRS ....................$CALL 2012 CAT D6T LGP, 6160 HRS ......................$CALL 2012 CAT D6T XW, 4897 HRS ....................$189,500 2012 CAT D6N XL, 3781 HRS ....................$149,000 2010 CAT D6K LGP, 3184 HRS ..................$115,000 2008 CAT D6T XW, 4732 HRS........................$CALL 2006 CAT D6R XL, 7434 HRS ....................$115,000 2001 CAT D6R XL,10544 HRS ....................$115,000

SKID LOADERS 2019 DEERE 333G, 5 UNITS..........................$CALL 2019 DEERE 331G, 150 HRS ........................$CALL 2019 DEERE 325G, 4 UNITS..........................$CALL 2019 DEERE 324G, 10 UNITS ........................$CALL 2019 DEERE 317G, 2 UNITS..........................$CALL 2018 CAT 289DXPS, 331 HRS ....................$75,000 2017 KUBOTA SLV75-2, 484 HRS ................$56,000 2016 CAT 262D, 1236 HRS ........................$39,000 2015 CAT 262D, 513 HRS ..........................$38,500 2014 CAT 287D, 1629 HRS ........................$42,500 2011 TAKEUCHI TL240, 2471 HRS ................$30,000 2011 BOBCAT S185, 3906 HRS ....................$19,000 2005 DEERE 325, 3600 HRS ......................$14,500

BACKHOES 2016 CAT 420F2, 2 UNITS ..........................$82,000 2016 DEERE 310SL, 1200 HRS ....................$93,500 2015 CAT 420F, 1941 HRS..........................$75,000 2014 DEERE 310SK, 2 UNITS ......................$58,500 2012 NH B95C, 1479 HRS ..........................$49,000 2004 DEERE 310SG, 5772 HRS....................$26,000 1980 DEERE 302A, 6781 HRS........................$CALL

MINI EXCAVATORS 2019 KOB SK55SRX-6E, 6 UNITS....................$CALL 2019 KOB SK45SRX-6E, 2 UNITS....................$CALL 2019 SANY SY60, 5 UNITS ..........................$CALL 2019 SANY SY35, 4 UNITS ..........................$CALL 2018 SANY SY50, 311 HRS ........................$47,500 2018 SANY SY35U, 115 HRS ......................$37,000 2018 LBX 75X3, 1113 HRS ........................$85,000 2018 KOB SK75SR-3E, 3 UNITS ..................$99,000 2018 KOB SK55SRX-6E, 294 HRS ................$63,500 2018 KOB SK35SR-6E, 2 UNITS ..................$45,000 2017 KOB SK55SRX ..................................$CALL 2017 KOB SK30SR, 208 HRS ......................$33,000 2017 KOB SK17SR, 408 HRS ......................$26,000 2017 SANY SY35U, 90 HRS ........................$39,000 2016 CASE 55CXB, 882 HRS ........................$CALL 2015 KOB SK35SR, 119 HRS ......................$41,000 2014 KOB SK17SR, 555 HRS ......................$24,000

Page 28 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

KENTUCKY DIAMOND EQUIPMENT

MICHIGAN MILLER-BRADFORD & RISBERG, INC.

www.diamondequipment.com Bowling Green 270-781-1061

www.miller-bradford.com Negaunee 800-562-9770

OHIO CAT

OHIO OHIO CAT

www.OhioCAT.com Richwood 888-446-4658

WILSON EQUIPMENT COMPANY www.wilsonequipment.com Lexington (Corporate Headquarters) 859-254-6443 Corbin 606-528-0700 Prestonsburg 606-874-8036

MO ORE TH HAN |

MINNESOTA ZIEGLER CAT

Cat Foundation Helps CUSTOM MADE Fight Social Injustice PRODUCTS Scrapers, Rollers & Graders

For Sale & Rent SIXTEEN LOCATIONS IN IOWA, NEBRASKA, & WISCONSIN

CALL ANYTIME 24/7

515-332-1875 Visit our website @ www.gncmp.com

The Caterpillar Foundation, the philanthropic arm of Caterpillar Inc., announced a commitment to help fight racism and social injustice. To honor the lives lost and keep with its mission, the Caterpillar Foundation is donating $1 million split between the following two organizations ($500,000 each): • The Equal Justice Initiative is committed to ending mass incarceration and excessive punishment, challenging racial and economic injustice, and protecting fundamental human rights for the most vulnerable in our society. • The NAACP Legal Defense and Educational Fund Inc. seeks structural changes to expand democracy, eliminate disparities and achieve racial justice in a society that fulfills the promise of equity for all Americans. “Caterpillar supports the fight against racism and injustice,” said Chairman and CEO Jim Umpleby. “Caterpillar and the Caterpillar Foundation look forward to working with the Equal Justice Initiative and the NAACP Legal Defense and Educational Fund to help build a better world.” The Foundation will continue investing in community programs that address the destructive effects of racism and the fight for equal justice. Through its existing U.S. Matching Gifts Program, the Caterpillar Foundation also is matching employee and retiree donations to eligible organizations that are most important to them, their families and the communities in which we live and work in the fight against racism and social injustice. For more information, visit www.caterpillar.com. 

www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)

WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 29

ILLINOIS DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon 618-242-2273

INDIANA MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

Page 30 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Dawes Rigging & Crane Rental Debuts Crane at Milwaukee Art Museum Project Dawes was contracted to provide a crane to assist with the delicate work to be performed high in the air. The crane was outfitted with a basket and was responsible for carrying two ironworkers up to the Brise Soleil’s fins.

KOBELCO-USA.COM

Mid Country Machinery

Southeastern Equipment Co., Inc.

3478 5th Ave S Fort Dodge, IA 50501 800-206-5936

Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303

4734 Sergeant Road Waterloo, IA 50701 319-234-8710

1356 3rd Street Brilliant, OH 43913 740-598-3400

106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

1500 Industrial Parkway Brunswick, OH 44212 330-225-6511 6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

provide a crane to assist with the delicate work to be performed high in the air. The crane was outfitted with a basket and was responsible for carrying two ironworkers up to the Brise Soleil’s fins. The ironworkers maintained constant radio contact with the Dawes’ crane operator, coordinating positioning as work progressed. The job also included using the LTM 1230 to replace one of the hydraulic cylinders used to open and close the span. Dawes’ rental specialist Kirk Williams said the project made an excellent maiden voyage for the new LTM 1230, which Dawes took delivery of in March, not only because of its boom length, but also its wind chart. “The museum is located directly on Lake Michigan, where wind is always a factor,” said Williams. “The Liebherr LTM 1230 not only gives us the reach we needed for the job, but it easily maintains stability even in winds 18 to 20 miles per hour.” The crane was configured with 243.2 ft. (74 m) of main boom at a 180-ft. (54.8 m) radius and the man

basket at approximately 100 ft. (30.5 m). Stability was aided by the deployment of full outriggers and 158,700 lbs. (71,985 kg) of counterweight. The crane was on site at the museum until maintenance work was completed, a little more than a week later. When Liebherr unveiled the fiveaxle, 275-ton(249.5 t) capacity LTM 1230-5.1, it touted the machine as extremely versatile, powerful and safe, with a surprising structural steel design. This includes outriggers that are single-stage in the front and double-stage in the rear, unlike any model that has gone before, according to the manufacturer. The single-stage outriggers feature greater rigidity and are lighter, a weight reduction that can be used to extend the boom length. The extended rear supports, together with Liebherr’s VarioBase, deliver particularly high lifting capacities, the manufacturer said. “This is a versatile piece of equipment,” said Williams. “We expect our customers will find a lot of uses for it.” For more information, call 800/2324100 or visit www.allcrane.com. 

26580 St. Rt. 7 Marietta, OH 45750 740-374-7479

DeForest, WI 608-222-9191

8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Eau Claire, WI 715-832-3443

404 Breaden Rd. Monroe, OH 45050 513-539-9214

De Pere, WI 920-338-5800

In 2001, the Milwaukee skyline changed forever with completion of the Milwaukee Art Museum’s Quadracci Pavilion. The 140,000-sq.-ft. expansion was crowned with a unique, motionenabled architectural detail dubbed the Burke Brise Soleil. Meant to evoke a bird’s wings or ship’s sail, the 217-ft. wide structure opens and closes via hydraulic cylinders. Weighing in at 90 tons, it consists of 72 individual steel fins that vary in length from 26 to 105 ft. The structure was the first project on U.S. soil designed by internationally renowned Spanish artist and architect Santiago Calatrava. Fast-forward almost 20 years: the dramatic setting provided the backdrop for the Milwaukee debut of a brand new Liebherr LTM 1230-5.1 from Dawes Rigging & Crane Rental, a member of the ALL Family of Companies. Indeed, the arc of the crane’s boom looks at home in the midst of the museum’s artistic architectural elements. When the Brise Soleil required maintenance, Dawes was contracted to

3875 W Fourth St Mansfield, OH 44903 419-529-4848

Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 31

Blue Ridge Tractor

Illinois Truck & Equipment Co.

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 32 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cranes Assist With Placement of Keystone for I-74 Arch Bridge KEYSTONE from page 1

tions and a Manitowoc 18000 crane with a 300-ft. boom to be used to lift arch floor secbetween Avenue of the Cities in Moline and tions. Middle Road in Bettendorf. “Bolting of the keystone has been comThe project includes the replacement of pleted and the stay cables were relaxed and the I-74 bridges over the Mississippi River then removed,” Ryan said. “The basket-hanas well as interchange ramp reconfigurations dle arch for the westbound bridge is now and local roadway improvements. freestanding. While there is much to be done The prime contractor for the bridge projbefore the first vehicle crosses the new westect is Lunda Construction Company. bound bridge, seeing the arch stand tall Other contractors are Civil Constructors across the Mississippi River for the first time Inc. for the Iowa westbound viaduct, which Iowa Department of Transportation photo was an historic moment for all.” is complete; Kraemer North America for the He noted that the keystone consists of two Illinois viaduct and ramps; Walsh The keystone weighs approximately 215,000 lbs. (112.5 tons) and was lifted into steel arch segments connected by struts. The Construction for the Illinois I-74 mainline place by a Manitowoc 650 crane with a 341-ft. boom. keystone weighs approximately 215,000 lbs. and ramps; McCarthy Improvement for the (112.5 tons) and was lifted into place by a Manitowoc 650 Iowa mainline and ramps; Langman Construction Inc. for crane with a 341-ft. boom. the Iowa local road reconstruction; Valley Construction for “The process for installing the keystone required extenthe Iowa ramp and storm sewer, which is complete; K&W sive preparation to ensure the correct fit,” Ryan said. “A Electric Inc. for roadway lighting; and Minturn Inc. for aeswork platform was installed below the gap in the arch to thetic lighting. facilitate installing a series of struts and jacks between the The Iowa Department of Transportation is the lead agency basket-handle arches. The struts and jacks, along with the of the bridge construction and contracts within Iowa, while cable stays on either side of the arch, allowed the contractor the Illinois Department of Transportation is a partner in the to spread apart the arch to fit the keystone.” bridge project and the lead agency for contracts within He noted that a series of surveys measuring every angle of Illinois. the arch also was conducted to determine how much the arch The I-74 Mississippi River Bridge project is part of an Iowa Department of Transportation photo needed to be adjusted vertically, horizontally and/or rotationoverall plan to improve the I-74 corridor and access across Crews set the keystone into place. ally. After minor adjustments to the arch were made, the keythe river. The project includes the replacement of the I-74 stone was rigged to the crane. bridges over the Mississippi River, expansion of I-74 to three “The crane lifted the keystone into position, while ironthrough lanes in both directions, interchange ramp reconfigworkers standing at the top of the arch — about 236 ft. above urations and local roadway improvements. the river — guided the steel segments between the splice According to George Ryan, I-74 corridor manger, Wood plates,” Ryan said. “Once the keystone was set, ironworkers Environmental and Infrastructure Solutions Inc., several and engineers took measurements and adjusted the position challenges have been encountered in the project. of the keystone to ensure the perfect fit. Working around the “From ice to rising river levels, working in the river clock, the ironworkers then secured the keystone with more requires significant patience and endurance,” he said. “The than 4,000 bolts.” construction of the basket-handle, true arch is one of the He stated that the installation process went smoothly and most complex activities on the project. It requires extraordionce the keystone was set, drivers could be heard honking as nary precision and effort given the geometric details of the they passed by and cheering was heard from those watching basket-handle shape and requires a great deal of coordinaalong the riverbank. tion, including delivering materials to the project site, prepar“While reaching a milestone like this is worthy of a big ing the foundations to receive the steel segments of the arch, Iowa Department of Transportation photo public viewing ceremony, social distancing was still in effect connecting the segments, etc. The last segment — the key- The equipment list includes a Manitowoc 650 crane at the time of the event,” Ryan said. “The project team got stone — for the first arch was installed on May 6, 2020.” with a 340-ft. boom that was used for the arch erection According to Ryan, the equipment list includes a and also will be used to lift arch floor sections and a creative and coordinated with the media and municipalities Manitowoc 650 crane with a 340-ft. boom that was used for Manitowoc 18000 crane with a 300-ft. boom to be used to ensure the public could remain home and view the event see KEYSTONE page 72 the arch erection and also will be used to lift arch floor sec- to lift arch floor sections. Iowa Department of Transportation photo

Iowa Department of Transportation photo

The project includes the replacement of the I-74 bridges over the Mississippi River, expansion of I-74 to three through lanes in both directions, interchange ramp reconfigurations and local roadway improvements.

The Iowa Department of Transportation is the lead agency of the bridge construction and contracts within Iowa, while the Illinois Department of Transportation is a partner in the bridge project and the lead agency for contracts within Illinois.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 33

Howell Tractor www.howelltractor.com 480 Blaine Street • Gary, IN 46406 219/810-6327

Construction Machinery Company Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900

www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 2235 Ragu Drive • Owensboro, 42303 Dealer Im mprintKYAr ea 270/683-2000 • 877/683-2262 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661

Kelbe Brothers Equipment Co., Inc.

Kirby-Smith Machinery, Inc.

www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151

www.kirby-smith.com 8320 Ruby Avenue • Kansas City, KS 66111 913/850-6300

4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 3101 French Rd. • DePere, WI 54115 920/343-6496

Page 34 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

3/2:6 7+$7 3(5)250 352)(66,21$/ 675(1*7+ 352)(66,21$/ 5(68/76

ZZZ VQRZSORZV KLQLNHU FRP

Butler Machinery Wins North Dakota Safety Council Award

STAR EQUIPMENT LT D .

WWW.STAREQUIP.COM

1401 2ND AVENUE DES MOINES, IA 50314 (515) 283-2215 (800) 369-2215

2625 W. AIRLINE HWY. WATERLOO, IA 50703 (319) 236-6830 (800) 791-9249

2950 6TH STREET SW CEDAR RAPIDS, IA 52404 (319) 365-5139 (800) 728-5139

2100 E. LINCOLN WAY AMES, IA 50010 (515) 233-9500 (866) 856-2312

The North Dakota Safety Council’s Safety & Health Awards program is designed to promote incident prevention by honoring companies with outstanding safety programs, employees with superior safety records and North Dakota citizens who have gone above and beyond to improve the safety and health environments in their communities. Recently, Butler Machinery Company, Butler Machinery Company received NDSC’s Workplace with locations throughout Safety Merit Award. North Dakota and South Dakota, received the Workplace Safety Chuck Clairmont, NDSC executive director. This year, the NDSC distributed 46 Merit Award. “As a statewide non-profit, we are dedi- awards to companies and individuals reprecated to preventing injuries and saving lives. senting multiple industries including transEach of these award winners plays a signifi- portation, manufacturing, construction, and cant role in helping to develop a stronger oil and gas. For more information, visit ndsc.org and safety culture in our state. We’re proud to have them as partners on this journey,” said butlermachinery.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 35

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650

1st Choice Equipment LLC www.1stchoiceequipment.com 1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802

Lano Equipment, Inc. www.lanoequip.com Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310 Corcoran, MN 888/479-4342 763/479-8200

ABC Equipment Rental & Sales

Southeastern Equipment Co., Inc.

www.abcequipment.com

www.southeasternequip.com

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868

38525 Chester Rd. Avon, OH 44011 440/934-7368

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

Page 36 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bridges Undergo Rehabilitation Along Busy Michigan I-496 Trade Corridor MDOT from page 1

MDOT photo

which is considered a significant local and national trade corridor. “The most heavily-traveled section of the pavement being reconstructed carries more than 51,000 average daily traffic on a standard business day,” said Jason Early, construction engineer, MDOT Lansing TSC. “The existing interstate pavement is now 50 years old, and has exceeded both its design and service life. The necessary ongoing maintenance The Michigan Department of Transportation (MDOT) is overseeing a $60 activities are cost-prohibitive on million project that will improve I-496 between I-96 and Lansing Road. an ongoing basis.” The “Pave the Way Project”, which combines rebuilding MDOT photo Michigan bond funds with FHWA dollars, will allow for the reconstruction of more than 5 mi. of interstate, along with various safety improvements. Preventative maintenance includes epoxy and polyester overlays; concrete deck and barrier replacements; and beam, substructure and slope paving repairs, structural steel painting and approach work. During the first phase of the project, all of eastbound I-496 traffic is fully detoured. In the second stage, westbound I496 traffic will be detoured to allow for a full closure of this section of roadway. This will result in the safest work zone for the public and construction crews, according to MDOT. The approach also optimizes the contractor’s efficiency to complete the project as soon as possible. Numerous bridges are being rehabilitated, and the Despite the inconvenience, Early said motorists are get- contractor is crushing the removed concrete pavement for use in the open graded drainage course to be ting used to the changes. “The traffic seems to have adjusted well to the detour of placed under the future concrete pavement. eastbound I-496. The public has adapted to the detour route, MDOT photo or found alternate routes, which have allowed the work zone to function well. It must be noted that overall traffic volume has been greatly reduced due to the COVID-19 situation, and the Michigan’s governor’s associated executive orders. These factors have certainly impacted the traffic negotiating the work zone.” Work began in spring 2020, with D.J. McQuestion and Sons Inc. serving as the prime contractor on the project. According to Early, completing the proposed contract work within the seasonal limitations is a significant challenge. “This is due primarily to the scope and scale of the work being performed on I-496. The reconstruction of the free- The “Pave the Way Project,” which combines rebuildway with the highest quality materials also is a challenge that ing Michigan bond funds with FHWA dollars, will allow the contracting team and construction oversight team are for the reconstruction of more than 5 mi. of interstate, fully committed to.” along with various safety improvements. The elements also have been a concern. “Weather was a factor in determining when the design had the open graded drainage course to be placed under the to be completed, and also when the project was let to indus- future concrete pavement. Workers also are assembling the try, such that work could commence at the beginning of portable concrete batch plant that will be used to generate the April when the weather improved. The work must be com- concrete mixture for the proposed pavement and shoulders. pleted by the seasonal suspension deadline in November.” Early noted that the initial phase of construction is proThe eastbound existing concrete pavement is being bro- gressing at a steady rate. ken and removed. There is ongoing grading of the aggregate “The sand subbase and open graded drainage courses are subbase and base material. Installation of the proposed being placed. The concrete pavement has been under way on underdrain is taking place, as well. the eastbound side. Westbound is expected to be completed Numerous bridges are being rehabilitated, and the con- by November. tractor is crushing the removed concrete pavement for use in see MDOT page 73

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

GENERAL EQUIPMENT & SUPPLIES, INC. DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000

www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 37

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 East Moline, IL 309-755-7203 800-633-9114

AUTOM MAT TED TO MAKE THE PRODUCTION N YOU NEED

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

Want to make your next machine acquisition really count? nt? Komatsu’s lineup of aautomated excavators, including thee all-new PC360LCi-11 and PC490LCi-11 490LCi-11 feature a revolutionary, faactory integrated, machine control system. The exclusive intelligent ligent Machine Control tecchnology lets operators focus on moving oving materials efficiently, without worrying about digging tooo deep or damaging the target surface. Contact your Komatsu distributor tributor to learn how you cann hit pay dirt today with Komatsu innovation. novation.

020

Page 38 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Roland Machinery Co.

Central Power Systems & Services

www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474

Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151

Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920

www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Great Bend, KS (816) 781-8070 (620) 792-1361 ALP Air, Light, Power Liberal, KS Liberty, MO (620) 624-7274 (816) 415-6700 Salina, KS Joplin, MO (785) 825-8291 (417) 726-5373 Wichita, KS Maryland Heights, MO (316) 789-7370 (314) 427-4911 Woodward, OK Springfield, MO (580) 256-6014 (417) 865-0505 Yukon, OK (405) 324-2330

MAKE POWER MOVES.

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 39

IN YOU OUR WORLD,

BIG JO OBS NEED BIG MACHINES. E Expect big things from f the John Deere 850L Do ozer. Larger and more powerful than the previous K-Series m model, the 850L gives you 10-ppercent more horsepower andd 23-percent more torque for mass eaarthmoving. And with state-off-the-art controls, the usual D Deere arsenal of production-boosting hydrostatic advantages, a SmartGrade™ fully integratedd grade-control option, p and the choice of a Power-Angle-Tilt g (PA AT) or o Outside Dozer (OSD) blaade, yyou’ll have the precision and performance you need to Run Y Your our World. W Stop by or call us today.

mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677

Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160

Page 40 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pages 41-54

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Cat MH3040 Material Handler Cuts FuelBy Up to 25 Percent Delivering the power and reliability required for the most demanding material handling applications in scrap and millyard operations, the new Cat MH3040 builds on the successful legacy of the M325D L MH model. The boom, sticks and other high-stress areas feature thick, multiplate fabrications, castings and forgings to withstand wear and deliver years of durable operation. Specially designed mountings on the upper frame support the new heavy-duty cab. The material handler’s new 202-hp (151kW) Cat C7.1 engine meets stringent U.S. EPA Tier IV Final emission standards with an aftertreatment system that requires no maintenance or downtime. New Smart Mode operation automatically matches engine and hydraulic power to working conditions to reduce fuel consumption, while Power Mode constantly provides maximum power to optimize productivity. The fuel-efficient engine can run up to B20 biodiesel and offers up to 25 percent lower fuel consumption than the M325D L MH, according to the manufacturer. Offering a 12 percent faster swing speed, the MH3040 reduces cycle times and allows operators to move more material in the same amount of time. The advanced hydraulic system features valve priority to direct pressure and flow to where it’s needed and delivers the optimum balance of power, efficiency and load control. The handler’s new heavy lift mode boosts lifting capacities and improves controllability. Its auto warm-up features reduce the time it takes for hydraulic oil warming in cold temperatures to prolong component life. Comfort and Flexibility The MH3040’s larger premium cab design includes sound suppression to reduce operating noise levels inside the cab. Smaller cab pillars combined with large tempered windows deliver enhanced all-around visibility. Rearview and right-side cameras are standard, keeping operator aware of their surroundings. New joystick machine control removes the center steering wheel column to further improve forward visibility. A tip-up left con-

The MH3040’s larger premium cab design includes sound suppression to reduce operating noise levels inside the cab. Smaller cab pillars combined with large tempered windows deliver enhanced allaround visibility.

sole allows operators to enter and exit the cab much easier. A larger, 10-in. high-resolution touchscreen monitor with jog-dial offers easy navigation of the intuitive operator controls. Joystick controls are ergonomically located within easy reach to reduce operator fatigue,

while joystick settings and preferred power mode are quickly set to a specific user ID via the monitor. The premium air suspension seat with headrest, heater and ventilator is designed to comfortably adjust to operators of all sizes. Offering a maximum 50.8-ft. (15.5-m)

Offering a maximum 50.8-ft. (15.5-m) reach, multiple configurations are available for the flexible MH3040 material handler to meet customer needs. Customers can choose from a range of work tool attachments in different sizes to meet the site’s material handling and production needs.

reach, multiple configurations are available for the flexible MH3040 material handler to meet customer needs. Customers can choose from a range of work tool attachments in different sizes to meet the site’s material handling and production needs. Work in low-light conditions with the standard, 1,800 lumen, LED lights on the boom, stick, and cab. The optional 20 kW generator with wiring to stick nose helps to efficiently power magnet attachments for handling fine ferrous material. Simplified Serviceability MH3040 material handler service design changes reduce maintenance costs by up to 20 percent. All fuel filters feature a synchronized 1,000-operating-hour change interval, and the new air intake filter with precleaner lasts up to 1,000 hours to reduce maintenance requirements. Its new hydraulic oil filter improves filtration and increases change intervals to 3,000 operating hours, a 50 percent longer service life over the M325D L MH. New anti-drain valves keep the hydraulic oil clean during filter replacement to improve system longevity. Filter life and maintenance intervals are quickly tracked through the in-cab high-resolution monitor. Featuring electric drive to operate only when necessary, the high-efficiency cooling fans can be programmed to automatically reverse at set intervals to keep the cores clean without work interruptions. The new right-hand-side service access provides easy access for refueling and engine oil checks. Standard Cat Product Link, new to the MH3040 material handler, captures critical operating data such as location, hours, fuel usage, productivity, idle time, maintenance alerts and fault codes, which can be remotely accessed and tracked to boost fleet management efficiency. New Remote Flash works around the production schedule to conveniently assure the machine is operating with the most current version of on-board software, so it delivers high performance, maximum efficiency and minimum downtime. For more information, visit www.cat.com. 

Page 42 • July 25, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Illinois

Indiana

Kentucky

Minnesota

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen Crushing & Screening

Theco, Inc.

7144 N. Harlem Ave. Chicago, IL 60631 www.midwestcrushandscreen.com

847.271.5027

255 N. Hetzler Court Angola, IN 46703 www.powerscreenindiana.com

260.665.5816 • 800.843.4277

11901 Westport Road Louisville, KY 40245 www.powerscreensales.com

800.227.0534

14833 164th Ave. S.E, Big Lake, MN 55309 www.thecoinc.com

763.263.0505

Michigan & Ohio

Missouri & Kansas

AGGCORP

Powerscreen Central

22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net

9001 Hickman Mills Drive Kansas City, MO 64132 www.powerscreensales.com

614.309.6854

502.326.9300

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 25, 2020 • Page 43

AIS CONSTRUCTION EQUIPM MENT CORP P.. www.aisequip.com m 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502

S Saginaw 46000 AIS Drive Bridgep port, MI 48722 989-777-0090 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

BUTLER MACHINERY CO. CO www.butlermachinery.com y 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. S 46th St. St Grand Forks, ND 58201 701-775-4238

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. N Louise Ave. Ave Sioux Falls, SD 57107 605-336-3010

CENTRAL SERVICE & SUPP PL LY Y, INC. www.centralsands.co om 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8 8600

RB SCOTT COMP PAN ANY IINC. www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792

ROAD BUILDERS MACHIINERY & SUPPL LY YC CO., INC.. www.roadbuildersmachine ery.com y 1001 S. 7th St. 5601 Fleetcher Ave. Kansas City, KS 66105 Linccoln, NE 913-371-3822 402-3 325-0447 4115 S. 90th St. 4949 Ju uergen Rd. Omaha, NE Grand Island, NE 402-331-9200 308-3 384-2620 1303 S. Chestnut St. Norfolk, NE 402-316-4640

™

Page 44 • July 25, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

A WIRTGEN GROUP COMPANY A

THE EVOLUTION OF INNOVA VATION. T THE EVO-LINE FROM KLE EEMANN

EVO IT’S ALL ABOUT EVOLUTION. The demands placed on plant s in the contrac ting sec tor are high: maximum output matched with cos tef fec tive operation – and all for the mos t diverse applications. This is exac tly what dis tinguishes KLEEMANN E VO -Line plant s. Thanks to highly innovative solutions, such as an advanced material flow concept, continuous feed sys tem, out s tanding safet y concept s and many more, KLEEMANN’sE VO -Line mobile jaw crushers, impac t crushers and cone crushers deliver a solid plus in per formance, ef ficienc y and versatilit y. Progress calls for real innovation – the KLEEMANN E VO -Line. w w w.wir tgen- group.com//a america

WIR RT TGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T Telephone: elephone: 615-501-0600

www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

www.rolandmachinery.com

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 25, 2020 • Page 45

Maximize your ROI

573-635-8700 • 888-972-2537 • www.rackersequipment.com

To get your best possible return on investment, highest productivity and longest equipment life, it’s important to use the right carrier with the right tool.

Before you buy or rent, rely on people you can trust.

#141147-"NEW" RDO 5x12 2-deck screener with CAT C-4 water cooled engine. Remote #152028-(NEW) Aggretek 36 X 25 Single control for feeder. Ball deck and grizzly hopper Fine Material Washer. with 15hp electric (no grizzly). 2-30" side discharge conveyors. motor and includes Nihard shoes, adjustable Mounted on tandem axel 5th wheel chassis. legs, catwallks, stairs, guards, and operator platform. In-stock and ready for shipment.

Allied Construction Products, with 78 years of experience, can guide you to the right hydraulic breakers – including our new Excellence and Performance Series models – and the right Ho-Pac® and Skid-Pac® compactor drivers. Because nobody delivers the right power, or the right features, like Allied.

Scott Scholz

Jeff Sharp

#510113 (2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4892 hours) & HD-709 drifter (2203 hours). Set up for T-45 Steel (14′ starter & 12′ changes). Has anti-jam circuit and dust collector. One-owner machine and all service records available. Well maintained & in very good condition.

#410071 Komatsu D65PX-17 dozer with 4380 hours on 205hp engine. Auto transmission, undercarriage approx 80%. Enclosed cab (very clean). 6-way angle blade with angle and tilt. Machine ready for work.

#920000- 2002 Con-E-Co Mobile Central Mix Concrete Plant 300 TPH. Includes: 12yd agg batcher, (3) 60yd agg bins, mixer charging conveyor, 595 BLL split silo, cement/flyash batcher, PJ-500 dust control, (3) 30”x82’ portable conveyors.

#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.

Rich Steinbrenner

#111070 Pioneer 2854 jaw crusher with 50x18’ VGF and electric motor all on a 3-axle chassis. Good condtion.

ALLIEDCP.COM | 800-321-1046

#161003 (New) Willis 36”x75’ Radial Stacker with folding head/tail sections, pintle hitch, 20hp electric motor, #6 gearbox, 3-ply belt, 35 degree idlers, and 5” Cema C idlers.

#510115 Furukawa 1200ED hydraulic rock drill with 12,206 overall hrs & 3154 hours on Cummins 6.7 remanufactured engine. 5776 impact hrs but only 39 hours on drifter reseal. Includes cab with a/c & heat, dust collector and an anti-jam circuit. Good condition.

THERE’s NO SUBSTITUTE FOR EXPERIENCE

HIGHWAY EQUIPMENT COMPANY

www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391

HOWELL TRACTOR AND EQUIPMENT

www.howelltractor.com 480 Blaine St. Gary, IN 46406 219-810-6327 2770 May Rd. Peru, IL 61354 815-224-3003

DRILLS & COMPRESSORS #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510112-(2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4840 hours) & HD709 Drifter (2261 hours). Set up for T-45 steel (14′ starter and 12′ changes). Has anti-jam circuit and dust collector. One owner machine & overall, very good condition #510087-Furukawa 9E hydraulic drill with Isuzu diesel engine. 10764 engine hrs, 4619 impact hrs. Anti-jam circuit, dust collector, uses T-45 steel, 14 ft starter with 12 ft changes. Good condition. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.

EARTHMOVING #810034-Euclid R-35 truck has an engine that is a Detroit diesel V12 with an Allison 6-speed automatic transmission. The tires are 1800x33 all in good condition about 50%. Bed liner looks good as does the remainder of the truck. No leaks. Runs good. #810137 1977 Caterpillar 769B Rigid Frame Haul Truck with Cat D343 engine (10,314 hours). 18.00-33 tires approx 50%. Bed is in good shape. Truck runs and operates good. #410063-CAT D9H w/ EROPS cab w/ A/C, straight blade w/tilt. Single shank, 4-barrel ripper. 24" pads. U/C (overall approx 70%). Rebuilt engine, trans, and finals (HMR 2994) Left Trunnion is available but needs to be installed. Overall good condition. #410070-CAT D6R dozer with 10' straight blade with good cutting edge. Has EROPS cab with air. Glass all good. 22" single grouser pads, overall condition of undercarriage is 60%. Pins have tit on drive side. Has 4600 hrs.

SCREENS #141120-Nordberg 6x20 3-deck incline screen with ball tray on bottom deck. No motor, but was a running take out. Good condition.

SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 bar rotor. No power. Crusher is in good condition. #121053-Cedarapids 5040 Hammermill secondary crusher with 5x16 3-deck screen. Has rotovator, 36" return and 36" front discharge conveyors. All mounted on tandem axle chassis. Plant is all electric except the hammermill is diesel jack shaft driven. No JAWS & IMPACTS power on mill. Power unit and control panel #111063-Terex Pegson 1180PT 32"x44" are available separately for $12,000. Engine FEEDERS self-contained jaw plant w/ operator-conruns, but needs to be rebuilt. 134001-Peerless 12 cubic yard hopper trolled track maneuvering. Large feeder w/ #121052-Svedala B9100 Portable VSI. with step grizzly section, grizzly pass-by chute, & with 42 belt feeder (2015), 5hp electric motor 36”x40 under conveyor, twin 300hp electric discharge conveyor. Plant is currently in use with electric panel in very good to excellent motors, switchgear, and 25hp motor for con& has approx 5082 (04/21/17)hrs. Very good condition. veyor, only 900 hrs and set w/rock shelf, good condition. #132015-Continental Gin 48"x25.5' apron condition. #112007-Kennedy Van Saun 3648 single feeder. Large feed box. Flights are approx #121055-New CEC 102×152 (approx. 42.5” x rotor impact with electric motor & Deister 80+%, good sprocket, & jackshaft drive gears. 61”) secondary impact crusher with 3-bar 50”x18’ VGF on 3-axle chassis. 60hp motor and gear box, but has removable rotor and hydraulic clearing. No motor, no #112044-Nordberg LT-1213 Track Mounted Impact. with 42”x12’ VGF, 36” cross belt mag- mount (for transport). Heavy duty apron feed- stand, but does have crusher shive. Excellent net, and 46” underconveyor, good condition. condition, never used. er. Shipping dims: 8' 7" tall & 30' long.

Jefferson City, MO 65110

Page 46 • July 25, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Sennebogen Hosts Demo Day at Its HQ

n June 18, 2020, Sennebogen held a live demo day of its 718 tree handlers at the company’s Stanley, N.C., headquarters.

Greg Roberts, Sennebogen tree care manager, said that his initial focus will be on building awareness of the Sennebogen brand and familiarity with the 718 and 738 tree handlers within the industry. “I’ll be working to increase the number of demos so more people have a chance to touch and feel and see what these machines can do. The more exposure this machine has, the more successful it will be. These machines certainly have a ‘wow’ factor to them.” The Sennebogen rubber-tired 718 M is a 47,180 lb. (21,400 kg) purpose-built tree care machine equipped with a hydraulic grapple saw attached to its 43 ft. (13 m) telescoping boom. It dismantles trees up to 75 ft. high, and is on rubber tires. Its high-rise and tilting Maxcab operator station elevates the operator for an unobstructed view into the work zone, according to the manufacturer. Its powerful hydraulics provides lifting capacity to grip, load and stack up to 3,700 lb. (1,700 kg), with the precise controls necessary to let operators perform delicate tree surgery. The 718 R-HD E Series also dismantles trees up to 75 ft. high, and is on tracks for added stability. The 718 is practical for municipal projects; roadside maintenance; commercial work; right of way clearing; utility line clearance; storm work; along rivers and streams; slopes and embankment maintenance; and other jobs that require the removal of more than trees. The 738 M, a rubber tired machine, provides similar capabilities on a larger scale: a 95,700 lb. (43,500 kg) machine with 75 ft. (23 m) reach is built to work off-road in heavy land clearing and right-of-way maintenance, easily dismantles trees up to 125 ft high.

Sennebogen 718E Benefits • Safer work environment and reduced liability • 10x the trees cut with one operator • Fuel efficient • Well-lit for night-time operations • Comfort for long hours — no operator fatigue • Durable, reliable and easy to maintain • Reliable service — next day replacement of parts • Industry competitive advantage • Includes a complementary 6-month marketing service with every purchase Sennebogen customers are served by experienced equipment distributors located throughout the United States, Canada and Mexico, with a growing network of service branches in South America. The company’s head office in North Carolina provides in-depth support to all service branches with on-site training, factory training, troubleshooting assistance and personal field support from its technical specialists. Extensive use of off-the-shelf and industry-standard parts allows many customers to complete routine service and preventive maintenance with their own staff. Sennebogen Training Services Integrated into its 100,000 sq. ft. head office facility, the Sennebogen Training Center provides hands-on factory training within driving distance for many of their American dealers and customers. With courses for service technicians, parts supply staff, dealer sales representatives and machine operators, the center is open to the staff of all Sennebogen distributors and customers at no charge. The Training Center is a dedicated facility with fully equipped classrooms and demonstration areas. The main demonstration bay allows hands-on access to full-size machines from three levels, including an elevated gallery. Instructors are all highly qualified specialists in material handling equipment and applications, combining practical field experience with years of instructional expertise and the most current technical information, according to Sennebogen. CEG

On June 18, 2020, Sennebogen held a live demo day of its 718 tree handlers at the company’s Stanley, N.C., headquarters. The Sennebogen rubber-tired 718 M is a 47,180-lb. (21,400 kg) purpose-built tree care machine equipped with a hydraulic tree saw and grapple attached to its 43ft. (13 m) telescoping boom.

Sennebogen works with many different attachment manufacturers on installation procedures to make sure both companies products perform as expected. Wade Myers of Wright Tree Service in Des Moines, Iowa, looks over the FAE UML/HY excavator mulcher. Around the Sennebogen 718 grapple saw attachment (L-R) are Greg Roberts of Sennebogen; Jeremy Lacey and Jason Sykes, both of L&L Tree Service in Jacksonville, N.C.; Terry Jones of Sun Machinery Company in Lexington, S.C.; and Jim Westlake of Sennebogen.

Sam Caldwell (L) of Sun Machinery in Lexington, S.C., and Brian Ligon of Big Dog Tree Service in Augusta, Ga., look over the grapple attachment on the Sennebogen 718E.

The 718 is practical for municipal projects; roadside maintenance; commercial work; right-of-way clearing; utility line clearance; storm work; and streams; slopes and embankment maintenance; and other jobs that require the removal of more than trees.

Construction Equipment Guide â€¢ Recycling Section â€¢ www.constructionequipmentguide.com â€¢ July 25, 2020 â€¢ Page 47

Tough Machine es. Dependable Peop ple. Superior Supporrt. We Keep YYou ou Working. Workking.

VISIT THESE SCREEN MACHINE DEALERS Apollo Equipment www.apolloequip.com Omaha, NE 402-625-7135

Berry Tractor

www.berrytractorr.com .com Garden Cityy,, KS Wichita, KS 620-277-2290 316-943-4246 Topeka, T opeka, KS 785-266-9509

6SULQJÂ¿HOG 02 417-831-2651

Diesel Machinery

www.dieselmachinery.com Aberdeen, SD Sioux Falls, SD 605-725-4364 605-336-0411 Rapid R id City City,, SD 605-348-7438

Ohio CA ATT

www.ohiocat.com Richwood, KY Broadview Hts, OH 859-372-4665 440-526-6200

Â®

AMERICAN-MADE INNOV NNOV VA ATION SINCE 1966

CRUSH EVERY JOBB

â„¢

800-837-3344

740-927-3464

email@screenmachine.com

www.screenmachine.com

Cadiz, OH 740--942-4626 740 942 4626

Perrysburg, OH 419-874-7975

Sharoonville, OH 513--771-0515

Troyy,, OH 937-335-7660

Coluumbus, OH 614--878-2287

Youngstown, OH Youngstown, 330-530-9010

N. Canton, C OH 330--244-2444

Zanesville, OH 740-453-0563

Page 48 â€¢ July 25, 2020 â€¢ www.constructionequipmentguide.com â€¢ Recycling Section â€¢ Construction Equipment Guide

CRUSHING

MA ATERIAL TERIAL HANDLING HANDLING

SCREENING

TRACKS

WASHING W ASHING & CLASSIFYING

6WHSNH &W Traverse, MI 49 685 231- 943 - 3700 )D[

3RQWLDF 7UDLO 1HZ +XGVRQ 0, 48165 248 - 356 - 5200 )D[

2OG 6 *D\ORUG 0, 989 -731- 9988

( 0LOH 5RDG 6WHUOLQJ +HLJKWV 0, 0, 48312 586 - 474 - 5063

The complete sour s ce for equipment in the aggregate, construction ction and recycling indu ustries. Offering industry--leading brands such as the Pioneer Jaw Crusher, Kodia akÂ® Plus Cone Crusher, Supe erStackerÂ® Â® Â® Â® Extendable Stack ker, ProSizer Mobile Screening Plant, Combo Screen, Vari-Vibe a High-Frequency Scr S een, Duo-VibeÂ® High-F Frequency Screen, Series 90 000 equipment, Fast Trrax, Gllobal Trrack and FastPack.

www.kpijci.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 25, 2020 • Page 49

93 8455&'1* 1&3) (1*&7.3, (43 879(8.43 *69.52*38

5 58 8 8 8

3*; 43.( 8*(-3414,=

5IVJSVQERGI .QTVSZIQIRX

'1 1 * *< < : :8 ' * < : 8

8( 1

Eriez Pulleys Can Transform Belt Conveyor Into Separator

JEIYWE GSQ JE

Setting The Standard In Static Screening Since 1998 With the largest selection of adjustable bar grizzlys available anywhere

YOU DON’T HAVE TO COMPROMISE Permanent and electric magnetic pulleys from Eriez automatically separate heavy tramp iron contaminants from conveyor transported materials. Customers can convert their belt conveyor into a powerful self cleaning magnetic separator simply by adding an Eriez magnetic pulley. Eriez magnetic pulleys provide ideal automatic removal of unwanted iron from materials conveyed on belts to prevent machinery damage and product contamination for sand, gravel, limestone, recycling, wood products, food, chemical, mining, rock products, ceramic, paper, plastic and rubber, coal handling and foundry operations, according to the manufacturer. All Eriez permanent magnet axial interpole pulleys are constructed of quality steel center tubes with welded dividers to securely hold magnet stacks. Standard pulley models

Permanent and electric magnetic pulleys from Eriez automatically separate heavy tramp iron contaminants from conveyor transported materials.

Produce Many Products With A Single Grizzly Set the deck bar opening you need and produce the exact material required You don’t have to settle for reducer grates that only allow two sizes, usually too large or too small

• Deck Bar Adjustments In 1” Increments • Safe / Self Cleaning ROCK RELEASE

• New Deck Bar Attachment System • Easy Deck Bar Replacement

Lorem ipsum

use powerful ceramic magnets in an axial interpole circuit. Eriez magnetic pulleys are built to stand up to the harsh demands of severe applications involving extra long conveyors, heavy loads or start–stop operations. Units are finish painted and hub bore holes are coated to prevent rust or pitting. Eriez magnetic pulleys are offered in a wide range of diameters to satisfy customers’ unique needs. Larger sizes can be built to order. Options available in the magnetic pulley line include custom pulley face widths, shafts and lagging. For more information, visit www.eriez.com. 

Lorem ipsum

Rock Grizzlys is all we do, contact us anytime to discuss your rock screening needs.

541-383-3700

rocktough.com SAMS & DUNNS Listed

800-496-3431

Page 50 • July 25, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Terex Washing Systems Offers Local, Remote Tech Support Never before has local support been as important, and Terex Washing Systems and its global dealer network has the ability to continue to provide vital “on the ground local support” during these unprecedented times. As international travel will continue to be disrupted for a considerable period of time, this local assistance, offered in conjunction with Terex’s “Remote Support Technical Team” of experts, means Terex can offer support to any washing operation, ensuring you can continue to operate, maximize your uptime and production, according to the manufacturer. Barry McMenamin, TWS director, said, “Our global dealer network provides enhanced levels of sales, service and support so we can continue to provide ongoing world-class service and support to our customers during these challenging times. The support of our regional partners combined with TWS direct support and experience means we can offer our customers end-to-end solutions, support and service. We’re working with partners who have been in the industry for many years and have extensive experience and expertise in servicing mining and quarrying industries.”

As international travel will continue to be disrupted for a considerable period of time, this local assistance, offered in conjunction with Terex’s “Remote Support Technical Team” of experts, means Terex can offer support to any washing operation.

Talk Directly to In-House Experts With more than 70 dealers globally, Terex has a dealer close to you that can offer support to all wet processing operators, the manufacturer said. For more information, visit www.terex.com/ washing. 

W.S. Tyler Equipment Rebrands to Haver & Boecker Niagara

Haver & Boecker introduced its global mineral processing brand, Haver & Boecker Niagara, to North America. Haver & Boecker Niagara combines the long-term success of the W.S. Tyler brand in North America with Haver & Boecker’s worldwide engineering and application expertise to help customers address their screening challenges more efficiently and more profitably through a complete portfolio of innovative mineral processing technologies. Haver & Boecker launched the new global brand Haver & Boecker Niagara in North America during ConExpo-Con/AGG 2020. “The ultimate goal of Haver & Boecker Niagara is to offer a complete portfolio of innovative mineral processing technologies to better meet the needs of our customers

North American-developed technology — including the F-Class vibrating screen — demonstrates the advanced innovations of Haver & Boecker Niagara engineering. The F-Class helps maximize screening efficiency and also is available as a portable plant to accommodate mobile operations.

throughout the world,” said Karen Thompson, president of Haver & Boecker Niagara’s North America and Australia operations. “As we move forward, North American customers will continue receiving the same

quality they have come to trust from the Tyler brand, but now under the Niagara name.” Streamlining the equipment portfolio will ensure parts commonality, allowing access to virtually the same parts worldwide.

Sharing one common technology portfolio also means one common service approach: increasing service availability and expertise to solve customers’ challenges. In the future, the brand will incorporate the expertise of its three mineral processing locations in Brazil, Canada and Germany. Together, they will collaborate on product design, consider application challenges, and manufacture processing solutions to improve Haver & Boecker Niagara customers’ efficiency and profitability Haver & Boecker Niagara will maintain its existing management, employees and distribution network in North America. The global equipment brand falls under the Machinery Division of Haver & Boecker, headquartered in Oelde, Germany. Beyond the mineral processing equipment offered by Haver & Boecker Niagara, the machinery division specializes in material handling, packing, mixing, filling and palletizing technology for the cement, building materials, food, chemical and mining industries. The company’s Wire Weaving Division produces thousands of various types of wire mesh for screening, filtration, automotive applications and laboratory technology, as well as architecture and design products. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 25, 2020 • Page 51

Lokotrack® ST4.10™ mo obile screen AIS CONSTRUCTION EQUIPM MENT CORP P.. www aisequip com www.aisequip.com m 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502

Saginaw 4600 AIS Drive Bridgeport, MI 48722 989-777-0090 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

High productio on needs heavy-duty screening Lokotrack a ST4.10 5' x 20' mobile scre een is ideal fo or large-scale aggreg gates production. Its triple deck ck screen produces fo our end produccts.

High capacit y screening Large scale 5' x 20' triple deck screen

The adjustable discharge height on 33' side conveyors makes it a powerful f screen in closed circuit crushing ushing processes together with other th Lokotrack units, and the wide ffeed e d hopper is ideal fo or whee h ell loader fe eeding in sand and gravel screening. Contacct your distributor or visit www.metso.com for more.

BUTLER MACHINERY CO. www.butlermachinery.com y 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 Bismarck 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46th St. Grand Forks, ND 58201 701-775-4238

Closed circuitt Ideal for closed circuit processes

Hybrid power Bi Power for elec tric op perations

CENTRAL SERVICE & SUPP PL LY Y, INC. www.centralsands.co om 4219 E. 50th St. • Des Moines, IA A 50317 800-247-2400 • 515-964-8 8600

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792

Track-mounted unit On-site mobilit y and easy to transpor t bet ween sites as a single unit

Page 52 • July 25, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Launches Its NW Rapid Range to Accommodate N. American Marketplace Metso is extending the NW1213 Rapid portable HSI crusher is NW Rapid series of transa wheel-mounted rock crushing plant. portable wheel-mounted crushing plants with a range developed specially to accommodate road transportation in North America. The first models of the range are the NW120 Rapid portable jaw crushing unit and NW1213 Rapid portable impact crushing unit, which have been re-designed to permit their transportation in most states of the North American market. “Traditionally, it has been very com- Rapid impact crusher is being delivmon in North America to put crushers ered to the USA and a set of NW120 on wheels. We developed the North units are being prepared for delivery as America specific models to meet our we speak.” customers’ requirements. Road regulaAbout NW Rapid tions are getting tighter and they are Series — Crush & Go looking for more complete solutions NW Rapid can be moved from one from one supplier,” said Julius Mäkelä, director of portable and modular solu- site to another using standard prime tions at Metso. “We are pleased to tell movers. Besides portability, other our customers that the first NW1213 advantages of the NW Rapid models

ease of navigation and a quick way to view details on any IROCK product to download and share. Visitors can efficiently find information on model specifications, equipment features, on-site equipment photos and 3D renderings, customer story video testimonials and contact information for parts and service. “We are very excited about our new website and are confident that current and new customers will be able to navigate easily to find the perfect mix of solutions and services from IROCK Crushers. Our team is also inspired with the launch of the IROCK rebrand and the new logo

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421

include quick set-up and a best-inclass production capacity of up to 500 metric tons per hour. NW Rapid has been designed so that the units can be set up in about an hour. The solution consists of modules that can be used to create a variety of combinations also in fixed installations as needed. For more information, visit www.metso.com/nwrapid. 

IROCK Crushers Launches New Website, Redesigns Logo, Marks Company’s Growth IROCK Crushers has launched its new website and logo design. Current leadership has recently embarked on rebranding IROCK Crushers. The company is now close to 30 years old and has evolved in its offerings, customers and innovations. In the last five years, the product line has greatly expanded to serve the crushing and screening industry. “The IROCK leadership team is totally committed to telling the IROCK story through the new website and new branding. The industry is undergoing significant change and IROCK is positioned to deliver a new way of doing business. We are committed to our dealers and customers and providing them the most efficient way to access equipment details as well as continuing to meet their needs for service and parts,” said Ken Taylor, president, IROCK Crushers. IROCK’s new website is designed with the customer in mind, featuring user-friendly access on any device,

LARGE EQUIPMENT DEALERS

design. The new design is a symbol of our strength and growth, and the conical piles more accurately represent what IROCK equipment can produce for its customers,” said Chris Larson, general manager, IROCK Crushers. IROCK provides mobile and portable crushing plants, screening plants, conveying equipment, and other related products for the demolition, recycling and aggregate industries. IROCK’s robust equipment will increase production and profits while also reducing downtime and operational expenses, according to the manufacturer. For more information, visit www.irockcrushers.com. 

Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255 www.lec1.com

Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer

6750 Millbrook Rd. • Remus, MI 49340 9340 • 1-800-952-0178 FIND US ONLINE WWW W.BANDITCHIPPERS.COM W.BANDITCHIPPERS.COM

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 25, 2020 • Page 53

Bandit Buuilds More Thaan Machines.... Bandit Industries has bbased its reputation on a simple truth – build them strong and stand tand behind our customers. And that’s what we’ve done eveery stepp of the wayy. Every Banditt® machine uses the highhest quality steel and is constructed cted by specialized teams to stand nd up to the toughest jobs. Thhat’s why more professionals truust a Bandit for their toughest jobs. bs. And every machine is backked by unbeatable factory support and an extensive dealer network. ork. 6750 Millbrook Rd. • Remus, MI 499340 • 1-800-952-0178 FIND US ONLINE WWW W.BANDITCHIPPERS.COM .

When it comes to yourr business, Bandit Industries doeesn’t just build machines. See hoow Bandit can build your bbottom line. Contact your local authorized a Bandit dealer today orr visit www.banditchippers.com to learn more!

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

Bobcat of Indy 1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640

West Chicago, IL 630-293-0606 Yorkville, IL 630-553-0150

Mokena, IL 708-596-8050

Merrillville, IN 219-381-3006

Wauconda, IL 847-526-4255

www.atlasbobcat.com

1200 East Highway 13 Burnsville, MN 55337 952-894-0894

588 Outpost Circle Hudson, WI 54016 715-531-0801

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

www.tristatebobcat.com

Cincinnati, OH 513-874-8945

Reynoldsburg, OH 614-863-1300

Mt. Orab, OH 937-444-3865

Lexington, KY 859-254-3936

Hillard, OH 614-876-1116

www.bobcat-ent.com

2935 Bluff Road Indianapolis, IN 46225 866-442-3052

4489 S Indianapolis, Road Whitestown, IN 317-769-4946

2075 E CR 67 Anderson, IN 765-643-4222

2002 West 3rd Street Bloomington, IN 812-287-8042

www.bobcatofindy.com

Page 54 • July 25, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

mhl 375 F -SERIES

COMPANY WRENCH www.companywrench.com 4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-649-8105

STRONG. RELIABLE. E EFFICIENT.

ERB EQUIPMENT COMPANY www.erbequipment.com 200 Erb Industrial Dr. Fenton, MO 63026 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

Discover Morre Fuchs World- Class Material Handlers

SECTION

Attachment Pages 55-58

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Fixed Thumb Grapple Expands Gradall Versatility in Emergency Applications Soosan America Adds SS-2000 DTH Drill to Rock Commander Line The SS-2000 is the newest DTH drill in the Rock Commander line by Soosan America. The SS-2000 is built with the same proven components that have made Rock Commander drills a market leader, according to the company. The SS-2000 DTH drill rig is one of the most advanced, comfortable, reliable, productive and easily serviceable drill rigs on the market with high penetration rates and low fuel consumption, according to the manufacturer. Powered by the Cummins a X15 Tier IV/ stage 5 diesel engine, the SS-2000 is ready to tackle 4.5-to 8-in. holes. Producing 950 cfm of air at 350 psi, it has the capability to power the DTH hammer and clear holes with ease, according to the company. The operator cabin has an 8-in. touch screen monitor which enables the operator to view and check equipment status and system functions with a touch of the hand. Drilling depth and drilling angle are displayed in real time on the monitor to enable the operator to produce the necessary holes. Many of the systems on the new DTH Rock Commander are customizable to meet the needs of the job. The operator can adjust the pulsing time and on/off function of each filter in the dust collection system to reduce the amount of free dust particles produced during the drilling operation. Fine control of the lubrication oil flow on the new Rock Commander SS-2000 enables the operator to keep the hammer properly lubricated under all conditions. Controls also allow for the increase or decrease of the flow to the cooling pump to control the rpm’s of the fan, giving the SS-2000 the ability to operate even in the harshest environments. For more information, visit junjin.us and rockdrills.net. 

More versatile than a thumb and bucket attachment, Gradall grapple attachments can be used to reach out and remove brush, debris and tree limbs that may block roadways.

Fixed thumb grapple attachments effectively expand the capabilities of Gradall excavators in emergency applications after severe weather, as well as for routine job site cleanup and demolition. The fixed thumb grapple is a primary attachment for Gradall Storm Recovery Series models — wheeled excavators designed to provide emergency response to the aftermath of hurricanes, tornadoes and other natural disasters. More versatile than a thumb and bucket attachment, Gradall grapple attachments can be used to reach out and remove brush, debris and tree limbs that may block roadways. This advantage combines with Gradall excavator mobility — the highway speed model can be driven at

60 mph to address blocked roadways and provide access to other first responders. Grapples also are particularly adept at moving bulky, irregularly shaped objects, municipal waste and building materials during demolition and site cleanup operations. Maintaining a strong, positive grip on loads, grapples can be positioned precisely with the Gradall boom that simultaneously telescopes and rotates 220 degrees without any loss of boom power. Grapples are available for Gradall’s Series V excavators as well as budget-priced Discovery Series models. For more information, call 800/445-4752 or visit www.gradall.com. 

Page 56 • July 25, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

East Attachments Offers Wide Array of Buckets, Rakes East Attachments is a national provider of heavy equipment attachments. The company’s products are manufactured for the construction and mining industries, but also cater to private operators in farming and other private industries. It is a family-owned and operated business that has more than 20 years of experience in the heavy equipment attachments industry. East Attachments prides itself in using

East’s tilting bucket is made from AR400 steel and is made to fit any size machine with a quick coupler or a standard pin on.

modern machines, including computer-generated plasma cutting systems that allows for exact OEM specs for all types of excavators, dozers, backhoes and front-end loaders. This allows East Attachments to manufacture products at precision specs for top level performance for its customers, according to the company. East Attachments also provides all American made attachments, with all products made and manufactured in Winston Salem, N.C. The company’s workforce is comprised of a team of workers including five master welders and certified machine operators. East Attachments also is the main contributor to more than 76 dealerships in the United States, including John Deere, Kubota, Case, New Holland, Caterpillar and Bobcat, among others. East Attachments manufactures specialty attachments such as skeleton buckets, tilting buckets, grapples, thumbs, dozer/loader rakes, log splitters, wood shears and many more. Root Rakes East Attachments specializes in manufacturing root rakes for dozers, front end loaders and excavator/backhoes. The company offers several different sizes to allow customers to select the most beneficial applica-

tion to suit their needs. East Attachments rakes are made from top quality AR400 steel to ensure customers are receiving the very best option in quality of steel. The company ensures that its attachments fit with the manufacture OEM specs by using precision laser cutting machines. Skeleton/Rock Buckets East Attachments offers skeleton/rock buckets, which allows the operator to East Attachments’ products are manufactured for sift/shake through the contents the construction and mining industries but also in the bucket. Customers can cater to private operators in farming and other choose the spacing in the buck- private industries. et due to the nature of the soil in each geographical area of the country. They Tilting Buckets are made from top quality AR400 steel to East Attachments takes pride in being one ensure heavy duty manufacturing, according of the original companies to produce the tiltto the company. ing bucket. Its tilting bucket is made from East Attachments offers four styles to AR400 steel and is made to fit any size choose from, including digging, ditching or machine with a quick coupler or a standard clean out, skeleton rake bucket and commer- pin on. The company’s tilting bucket is made cial net bucket. The skeleton buckets are to tilt at a 45-degree angle in both directions, made to fit any size machine with a quick making it optimal for both ditching and digcoupler or a standard pin on. ging purposes. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • July 25, 2020 • Page 57

BR RING SA AFETY, INNOVA I VATION T & DURABILITY Y TO YOUR O JOB B SITE ESCO loader buckets are precision engineered and d feature the Ultralok® too oth system that provides safer and easier tooth replacement. ment. Combined with premium mium materials and skilled d fabrication, ESCO delivers vers one of the most durable, high-performance gh-performance buckets available.

Ultralok® Tooth o System y

ESCO Manganese Crusher Wear e r Parts

General Equipment & Supplies, Inc.

Howell Tractor and Equipment, LLC

www.genequip.com

www.howelltractor.com

4300 Main Avenue • Fargo, ND 58103 800-437-2924

480 Blaine Street • Gary, IN 46406 800-852-8816 2770 May Road • Peru, IL 61354 815-224-3003

www.esco.weir .

Copyrig ght ©, WEIR and the WEIR Logo are trademarks demarks and/or registered trademarks off We eir Engineering Services Ltd.

Page 58 • July 25, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

Paladin Launches Its New FD60 High-Flow Forestry Disk Mulcher Stanley Infrastructure announced Paladin is offering a new high-flow forestry disk mulcher, the FD60. The skid steer attachment accomplishes felling, mulching and stump-grinding in a quick, one-step process. The FD60 maximizes up-time, minimizes service intervals and withstands aggressive use in various conditions. Its design reduces jamming risk and increases productivity at the job site, Designed to keep teeth sharp over time and with a wide-angle intake and efficient provide maximum tool life, the FD60 comes drive system that rapidly recovers with a reinforced debris shovel that gets speed for maximum uptime, according under trees and logs, keeping edge teeth out to the manufacturer. of the dirt. Equipped with a MulchPower gauge, operators can see when maximum faces, while the balanced 100 percent solid rotational energy is stored in the disk to hit machined QUADCO Disk integrates seamlessly into the hydraulics. trees with full strength capacity. Aggressive and durable hydraulics offer Designed to keep teeth sharp over time and provide maximum tool life, the FD60 premium performance features, including: • protection from unintentional debris comes with a reinforced debris shovel that gets under trees and logs, keeping edge teeth damage • zero-maintenance bearing housing out of the dirt. One hundred percent QUAD• smooth ride” CO teeth offer enhanced cutting performFor more information, visit paladinattachance and simple service, with identical teeth on top, bottom, edge and interior cutting sur- ments.com. 

Trucks & Trailers

SECTION

Pages 59-65

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Felling Acquires 2-Cell Gantry Robot, Increasing Efficiency Felling Trailers has always strived to be at the forefront of innovation — from the trailers it manufactures to the equipment its team uses to build them. In the fall of 2019, Felling acquired a 2Cell Gantry Robot with Fanuc R-100iC Robotic Arms. The Gantry Robot addition helps to reduce lead times by increasing production capabilities and efficiencies, according to the company. “Our [Felling Trailers’] goal with adding the 2-Cell Gantry Robot is to provide a consistently high-quality product while reducing production lead times,” said Paul Radjenovich VP of operations of Felling Trailers. Felling is no stranger to robot weld systems. The Gantry Robot is one of several robots that Felling has put into service throughout the years. In early 2000, Felling Trailers purchased its first robotic welding system, an OTC Robotic Welding Cell. The OTC was utilized to produce a variety of ramps for its 90A production operator staging the fixture for the next gantry robot program run. plus ramp trailer models. Then in 2010, the company purchased its second robot, a Genesis Robotic Welder. The Genesis is utilized in the production of ramps, dump trailer doors, and other trailer components. With the recent addition of the 2-Cell Gantry Robot, the company can weld a trailer to framelevel, hitch to tail including cross members, frame rails, headboard, and tailboard. No matter the level of automation that a robot can provide, there remains the need for an operations team. The Gantry Robot’s operations team consists of the production operator, CWI weld trainer, fixture designer, and a maintenance technician. The weld trainer and fixture designer work together to layout the fixtures needed for trailer builds and the programming. The production operator’s role is to place trailer components into the fixture and verify tolerances Felling Trailers’ 2-Cell Gantry Robot during production run. before the robot starts its work.

The robot’s objective then is to weld the trailer to its “frame-level.” While the robot is welding the frame, the operator monitors the welding process while staging the next fixture to run through the gantry robot program. Overall the framelevel weld production process is completed roughly 30 percent faster than a manual process. With the frame-level weld complete, the trailer moves on to an assigned weld team to add axles, tie-downs and other customer-specific weld-on options. To date, the 2-Cell Gantry Robot has completed 150 units built between two of Felling’s most popular model lines. As more model lines are added, new fixtures will be designed and programming written. “The continuous addition of fixtures will help develop multiple teams to work together and advance their training,” said Chris Berg project manager. Along with adding more model lines to the Gantry Robot’s database, Felling also will be adding trailer components such as beavertails to maximize its productivity based on product demand. “We have seen significant growth over the last several years, and with that comes the need to increase manufacturing capacity to meet market demands for our product,” said Radjenovich. The addition of the 2-Cell Gantry Robot has created a new step in the production cycle of trailers. The increased production capabilities have, in turn, created additional jobs on the front end of the build cycle for engineers, fixture designers, fabricators and material handlers to feed the robot. Then on the backside of the production cycle, once the robot has completed the trailer to frame–level, there is the need for weld teams to complete the weld production cycle, bringing the process full circle. For more information, visit www.felling.com. 

Page 60 • July 25, 2020 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

www.jeffbelzerchevy.com

JARRET PETSCH 952-469-7063 JPETSCH@JEFFBELZER.COM Lakeville, MN 55044

JOHN ZADURSKI 952-469-6818 JZADURSKI@JEFFBELZER.COM Lakeville, MN 55044

OFFERS

Construction Equipment Guide â€˘ Truck & Trailer Section â€˘ www.constructionequipmentguide.com â€˘ July 25, 2020 â€˘ Page 61

Â Â? Â? Â? Â? Â?

Â Â

Â Â Â€

Â€ Â€

Â?

Â‚

Â? Â? Â? Â? Â? Â? Â? Â Â

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800 Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 Marne 1064 Franklin Street Marne, MI 49435 616-371-7250 www.McCannOnline.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 www.diamondequipment.com

Ziegler CAT 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Alta Equipment Company Bryon Center, MI 616-878-7450 New Hudson, MI 248-356-5200 Traverse City, MI 231-714-6210 Detroit, MI 313-394-1811 Flint (Burton), MI 810-744-4840 Gaylord, MI 989-731-9988 Sterling Heights, MI 568-474-5063 Bloomington, IL 309-585-3800 Spring Grove, IL 708-547-7300 Ottawa, IL 815-313-2070 www.altaequipment.com

Â? Â? Â? Â? Â Â?

Page 62 • July 25, 2020 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Kenworth T880 Is Key Marketing Tool for Dig-it Excavating When Dervin Witmer founded Dig-it Excavating, a small, family-owned and operated company based in Cassopolis, Mich., he knew the way he marketed his business would be instrumental in achieving success. With a number of established excavating companies operating in the surrounding areas of Cassopolis, Witmer built up his company using a combination of online marketing tools and Kenworth T880s to promote the business. “I knew we had to do things differently to get our name out there to compete with the competition in the area,” Witmer recalled. “When we started the company 15 years ago, it was all about creating a brand that established professionalism and innovation – and used modern tools to help us achieve that. We developed a well-designed website featuring videos that describe the services we provide and created social media Dervin Witmer of Dig-it Excavating accounts to further market the company and engage with customers. As soon as we were in a position to purchase equipment that we believed would support our marketing goals, we began adding Kenworth T880s.” According to Witmer, Kenworth’s reputation of building quality, high performing vocational trucks, made his decision an easy one when he decided to add Kenworth T880s. “I’ve always been a fan of the Kenworth product,” said Witmer. “I believe Kenworth is the industry leader when it comes to producing vocational trucks. Not only do they build great-looking trucks, but they’re made to last. When I was financially ready to begin buying new trucks, I knew the T880 would support our marketing efforts and provide us the Dig-it Excavating uses Kenworth T880s dump truck to haul aggregate to and from service we needed.” Dig-it Excavating provides septic job sites. tank and excavating services in southwest Michigan. The company’s Kenworth it’s important to keep our customers and T880 equipped with an 18-speed transmis- drivers safe during the process.” For Dig-it Excavating, the company will sion and a 4,700-gal. Curry Supply vacuum tank, has been working non-stop to meet the soon be more prepared to handle the increase in business. The company is in the process of needs of his customers. “Since people are spending more time at putting its newest truck — a Kenworth T880 home, septic tanks are filling up at a faster equipped with a PACCAR MX-13 engine rate than usual. A few months ago, when and a 4,500-gal. Curry Supply vacuum tank there seemed to be a limited supply of toilet — into service. “Before the current market conditions, we paper, we responded to a number of calls due to people flushing products that shouldn’t be were already in need of a second septic truck flushed,” said Witmer, who noted that the to keep up with increasing customer company provides drivers with gloves, demands, so the timing of our newest T880 masks and disinfecting wipes for drivers to coming into service is perfect,” said Witmer. On the excavating side of the business, the use when they go out to meet with cuscompany utilizes a Kenworth T880 with a tomers. “Maintaining our health is key for us to 10-yd. dump body. The company uses its get through this outbreak,” said Witmer. Kenworth dump truck to haul aggregate to “Our drivers engage with customers more and from job sites. Dig-it Excavating began adding frequently when servicing septic tanks, so

Dig-it Excavating’s Kenworth T880 equipped with an 18-speed transmission and a 4,700-gal. Curry Supply vacuum tank.

Dig-it’s excavating side of the business utilizes a Kenworth T880 with a 10-yd. dump body.

Kenworth T880s to its fleet in 2015. Witmer said his drivers have noted the T880’s enhanced visibility and tight turning radius. “Many of our jobsite locations require our drivers to navigate tight roads and back-in frequently. The T880’s maneuverability is top-notch and makes our drivers’ job a little easier when they’re servicing customers in areas that are difficult to get to,” he said. According to Witmer, the company consistently posts pictures of its Kenworth T880s at work on the company’s website and on its social media pages. The company recently participated in the Kenworth Work Truck Month competition in March, which required participants to post pictures of their Kenworth vocational trucks using #KWWorkTruck. Dig-it Excavating won the contest, and received a 1/30 scale model Kenworth T880.

“We follow Kenworth closely on social media so when they announced the competition, we figured we’d participate, especially since we regularly post photos of our trucks,” said Witmer. “We take good care of our trucks and keep them clean. They are our biggest asset when it comes to promoting the business. People in the community have come to know us for the trucks we operate. Our drivers mention how they receive positive comments all the time when they’re out on the road. “We get the best of both worlds with our Kenworth T880s — a marketing tool that assists our efforts to grow the business, backed by the overall performance we expected when we decided to purchase them,” said Witmer. For more information, visit kenworth.com. 

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • July 25, 2020 • Page 63

What can you haul in a side dump trailer? Nearly anything.

Superior Stability

Faster Cycle Times

Easier Unloading

With construction grade tires and an ability to haul dirt, rock, millings, riprap and other materials, our trailers help solve the everyday challenges of the construction industry. When we build trailers, we build solutions. 800-779-8099 • sidedump.com

Page 64 • July 25, 2020 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Globally Available IntercompWIM Delta Software Simplifies Inventory Tracking Intercomp, a manufacturer of portable vehicle weighing and measurement products, has made its IntercompWIM Delta software available to the global industrial scale market. The software is a standalone interface for customers to take advantage of the efficiency and cost-savings of Weigh-In-Motion (WIM) technology while more accurately tracking bulk material inventory, in real time. IntercompWIM Delta automates weight collection to compare and calculate Gross/Net weights for vehicles hauling incoming and outgoing goods. IntercompWIM Delta compares records with matching vehicle IDs to calculate net, tare and gross weights. The system utilizes those values to determine the weight of incoming and outgoing materials. This data is then able to be forwarded to a third-party inventory software for real-time tracking or exported to a spreadsheet. Vehicle usage and overweight alerts IntercompWIM Delta automates weight collection to comalso are saved and can be recalled or exported for pare and calculate Gross/Net weights for vehicles hauling incoming and outgoing goods. later use. IntercompWIM Delta’s ability to control scales monitoring up to two lanes of traffic — for example, a ded- large facilities. The software is available for purchase icated inbound and outbound lane — simplifies how WIM through any scale dealer that sells Intercomp’s line of scale technology is utilized for daily operations of nearly any Weigh-In-Motion (WIM) Strip Sensors, LS-WIM and type of business. When paired with IntercompWIM scales, portable LS630-WIM using a PC. For more information, visit intercompcompany.com.  the software completes a stand-alone system for small or

New Geotab Connected By Mack Offers Integrated, Comprehensive Telematics Mack Trucks announced the availability of Geotab Connected by Mack, a new integrated, expandable open telematics platform for fleet managers and drivers which includes access to fleet management, Electronic Logging Device (ELD) and driver compliance solutions. Geotab Connected by Mack is a cloud-based platform and requires no additional installation or hardware on 2015 and newer Mack truck models. “Mack Trucks is pleased to partner with Geotab to offer a cloud-based integrated platform for fleet management and driver compliance,” said David Pardue, Mack Trucks vice president of connected vehicle and uptime services. “Geotab Connected by Mack enables customers and drivers to generate multiple reports that can help them be more efficient and improve productivity — all through one inte-

grated platform.” Included in Geotab Connected is Geotab Drive, an ELD application launched by Mack in 2019 which leverages cloud computing via Geotab, the global leader in IoT and transportation solutions. The device, factoryinstalled in every Mack vehicle, sends engine and positional data to the cloud, which then generates automatic duty status logs. The driver can access these through the Geotab Drive app on a mobile device, allowing for an easy-touse option to receive a comprehensive and accurate record of duty status.

The cloud enables reports for hours of service, records of duty status and driver vehicle inspection reports. With no pairing process required, the vehicle will continue to record data regardless of the connection status of the mobile unit. Wireless interference will not impact reporting. “Geotab Connected by Mack equips customers with access to the data they need to help increase efficiency, monitor compliance and improve productivity,” said Scott Sutarik, vice president of Commercial Vehicle Solutions at Geotab. “As a company dedicated to optimizing fleet management, it is exciting to work together with Mack to not only increase value for customers through this robust fleet management offering, but also to help simplify the customers experience by offering one integrated, easy-to-use platform.” For more information, visit www.macktrucks.com. 

www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 8300 M-72 East Williamsburg, MI 49690 231-267-5060 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121

www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700 455 West Ave. North West Salem, WI 54669 608-786-2644

Construction Equipment Guide â€¢ Truck & Trailer Section â€¢ www.constructionequipmentguide.com â€¢ July 25, 2020 â€¢ Page 65

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV (09 9(47: $ 56 /,(=@ 30-;05. $ 56 )(*2 051<9@

)7 /3 ZLWK $LU 5DPSV

:JHU 5V^ [V >H[JO =PKLV

)7 7$ $LU 7LOW ZLWK $LU 5DPSV

)7 /3 ZLWK $LU %L )ROG 5DPSV

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182

3021 West 133rd Shakopee, MN 55379 952-445-6310 23580 Highway 55 Loretto, MN 55357 763-479-8200

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551

1400 W. Ogden Ave. Naperville, IL 60563 630-355-7150

www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362

600 Walnut Ct Rockdale, IL 60436 815-730-9011

3021 South 460 East Lafayette, IN 47905 765-477-6933

3110 Prairie Rd. Rockford, IL 61102 815-961-3160

1095 N Curry Pike Bloomington, IN 47404 812-333-9677

25166 State Road 2 South Bend, IN 46619 574-232-1461

3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576

3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160

Page 66 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195

2018 Takeuchi TB216, OROPS canopy, 15 Hp Yanmar diesel, 9’’ wide rubber tracks, 3,900 lbs operating weight, 381 hrs .......................................$24,560 15-16 JM Call Steve 262-373-2151

2018 Hitachi ZW80, Enclosed ROPS, 61 Hp Kubota, 1.2 cy GP Bucket, Ride control, 231 hrs ........$67,500 Call Steve 262-373-2151 15-16 JM

2016 Case TV380, Cab w/ Heat & A/C, Enclosed ROPS, 78’’ Bucket w/ BOE, 90 Hp diesel, Hyd quick attach, Ride control..........................................$39,800 15-16 JM Call Steve 262-373-2151

2014 Link-Belt 210 X3, Cab w/ Heat & A/C, Enclosed ROPS, Hyd coupler, 160 Hp T4i Isuzu diesel, 32’’ wide tracks...................................$100,700 15-16 JM Call Steve 262-373-2151

1999 SmithCo 36 Ft Tub, New Paint, Brakes, Wet Kit Pump, Tank, Hoses, Cab Controls ..............$Call 15-16 AP Call Mike 319-470-8388

2017 Takeuchi TL12, s/n 412100463, 1400 Hours, Cab w/AC , Hyd Coupler, Pattern Changer, New Tracks, 84” Tooth Bucket......................52,500 call STEVE @ 630-878-8765 15 JM

Bobcat E42, includes 12” & 36” buckets. Starts and runs well. ..............................................$40,000 Call Kevin @ 630-510-6050 15 JM

2006 Ditch Witch SK650, 2700 Hours, Good Condition .. ....................................................................Call For Price 15-16 EB Call Tania 614-443-9751 x237

2001 Grove TMS 500E, 40 Ton, 95’ Main Boom, 26’-45’ Jib, 3 Sheave Block, 68,000 Miles, 10,112 Hrs, 1 Owner Machine, Fresh Grove Paint, Cleveland, Ohio .............................................CALL Call Andy Forepaugh 216-316-1511 15-16 EB

2005 Linkbelt HTC 8660, 60 Ton Cat C-11 Engine, 13512 Hours, 110’ Main Boom, 56’ Jib, Aux Hoist , 3 Sheave Block, Ball Current Certification, Original Owner................................................Call for Price Call Andy Forepaugh 216-316-1511 15-16 EB

2015 New Holland W80C, s/n P00483, 864 Hrs, Radio, A/C, Heat, Front & Rear Work Lights, Auto Ride Control, Cold Weather Pkg, Air Seat, Standard Aux. Hyd., Deluxe Cab, Return to Dig and Bucket .................................................$62,000 dwietbrock@ronsonequipment.com 15 JM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 15-16 EB

2018 Case SR270, s/n NHM435461, 1770 Hours, Cab with Heater & Air, Two Speed Mechanical Controls, Hydraulic Coupler,12X16.5 Ties 78" Heavy Duty Dirt Bucket...............................$33,500 15 JM Call Steve @ 630-878-8765

2017 DD120C, w/Intelligent Compaction and Pass Counting, #7540 ...........................................$97,000 15 JM 800-283-1336

2016 Hyundai HX160L, One owner, 10’ 2’’ Long arm, 137 HP Perkins Engine, 3,300 hours...$72,000 15 JM Call George 219-696-8911

1998 Ingersoll Rand DD24 Roller #8308, #8308 ... ......................................................................$6,750 15 JM 800-283-1336

2015 Leeboy 8500C, s/n 122257, 2750 Hrs,

2007 DD138HF Roller, (s/n: 194909) 4300 Hours, Paving Width 8’-15’, Heated Screed, Legend 84” Drum Width, #5671................................$22,500 Screed System ............................................$59,900 15 JM 15 JM 800-283-1336 Call Steve @ 630-878-8765

SEE YOUR BARGAIN AD IN COLOR ONLY $60 EXTRA 2015 LeeBoy 8510C Paver, #8165 ...........$58,750 800-283-1336 15 JM

FOR TWO INSERTIONS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 67

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $130 • Color $190

2017 Komatsu PC240LC-11, 177 HP, 56,360# operating Weight, 19' 2" Boom, 11' 6" Arm, 31.5" Grouser, EROPS, Heat, AC, Rear View Camera, 1 or 2 Way Aux Hyd, Center Roller Guards, Hyd Quick Coupler, Auto Lube System, 28" Toy Bkt w/Teeth, 2 Buckets, Komatsu Care Certified, 12 Month 1,000 Hour Premier Warranty Good Through 12-31-20 .$247,500 Call Dan Rude 605-336-0411 15-16 PK

NATION’S LEADING EXTREME SERVICE SPECIAL APPLICATION BUCKETS Hundreds in Stock - Variety Sizes - Many Models Call Emilee 218-863-6444 Email: ai@attachmentsintl.com 15-16 AP

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

Ritchie Bros.’ Market Trends Provides Truck Tractor Insights Ritchie Bros. is now sharing the insight it has into industry trends via its Market Trends module within its Ritchie Bros. Asset Solutions suite of tools, allowing customers, investors and analysts to better understand the strength of an asset class through indepth analysis of Ritchie Bros. transaction history, including market trends, equipment price performance, asset valuation curves, and mix-adjusted price indexes, according to the company. Each month, Ritchie Bros. publishes a free, downloadable report of pricing trends, broken out by industry. The July report is now available for download. The full Market Trends module is available by paid subscription. “Similar to last month’s report, while prices across the major sectors are lower than a year ago, the rate of decline has continued to moderate through the high-volume June time period,” said Ken Calhoon, vice president, Data Analytics, Ritchie Bros. “Both the U.S. and Canada are showing stability across key equipment categories, and Texas, California and Alberta continue to be the top-three North American markets

in terms of buyer participation.” “Used equipment experts, sellers and buyers look to Ritchie Bros. transaction data as the industry gold standard,” continued Calhoon. “We have the full dataset, the understanding and the ability to derive deep insights. Our team of data analysts and data scientists use machine learning and data visualization to create one of the best used equipment data products on the market.” The Market Trends application is an independent part of the suite of services within Ritchie Bros. Asset Solutions (rbassetsolutions.com), which is a complete end-to-end asset management and disposition system. This cloud-based SaaS solution brings together a suite of tools and services to help customers better manage, analyze and sell their assets. From any internet-enabled device, customers are able to access a complete inventory management system, data analytics and dashboards, branded e-commerce sites and multiple external sales channels. For more information about Market Trends, email dataproducts@ritchiebros.com. 

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. JULY/AUGUST 2020 CRANE SAFETY COURSES NEW LOCATIONS! REGISTER TODAY! July 28 – July 31, 2020 Overhead Crane Train The Trainer, Cincinnati, OH July 28 – July 31, 2020 Overhead Crane Inspector Training, Houston, TX August 3 – August 7, 2020 Overhead Hoist Maintenance Training, Orlando, FL August 4 – August 6, 2020 Forklift Operator Train The Trainer, Houston, TX August 4 – August 7, 2020 Mobile Crane Inspector Training, Cincinnati, OH August 10 – August 14, 2020 Mobile Crane Train The Trainer, Portland, OR August 11 – August 13, 2020 Rigging Inspector Training, Cincinnati, OH August 11 – August 14, 2020 Overhead Crane Inspector Training, Orlando, FL August 20 – August 21, 2020 Qualified Signal Person Training, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com ASSOCIATED GENERAL CONTRACTORS (AGC) AGC’s Three Part Webinar Series: Business Development, Marketing & Proposal Basics for the General Contractor Dates: July 28, 2020 - 2:00pm to 3:00pm Price: Member : $149 Non-Member: $199 Description: The AGC Business Development WebEd Series, brought to the AGC membership by the AGC BD Forum, will be held in May, June and July of this year and will be sure to improve your business by focusing on the basics of Business Development, Marketing and Proposals for the General Contractor. We are confident that by the end of this WebEd Series, you will be more prepared to grow your talent within your company, expand your client map and continuously improve your processes and strategies.. Part One: Basics of Business Development for the Busy General Contractor – May 12, 2020-COMPLETED Part Two: Basics of Marketing for the Busy General Contractor – June 23, 2020-COMPLETED Part Three: Basics of Proposals and Presentations for the Busy General Contractor – July 28, 2020 Most proposals and presentations have 3 things in common; a lot of talk about how great we are; a lot of boiler plate language that says the same thing as our competitors; and Boring, boring, & more boring. All 3 are losing behaviors! In this webinar, we will discuss the following: • Gathering the intel needed to craft a tailored message • Creating a compelling offering around the client’s key issues • Flipping the focus from “Us” to “Them”. • Focusing on the “Benefits” we offer, as opposed to the “Features” • Mastering the use of the Executive Summary • And much more! For more information on the above event, contact AGC of America, 2300 Wilson Blvd. Suite 300, Arlington, VA 22201. Phone: (703) 548-3118. www.agc.org. For computer specifications, please visit https://www.gotomeeting.com/meeting/online-meeting-support or contact webinars@agc.org. MINNESOTA ASPHALT PAVEMENT ASSOCIATION (MAPA) 7th Annual MAPA Golf Outing When: Monday, August 10, 2020 Time: 10:30 am - 7:00 pm Where: Bunker Hills Golf Club 12800 Bunker Prairie Rd NW Coon Rapids, Minnesota 55448 Save the date! We are ready FORE summer and a great golf event! Mark your calendar for August 10 and get your foursome together as you won’t want to miss this year. We’re back at Bunker Hills! This will be a great networking opportunity for all participants. We are hoping for another great turnout and beautiful August weather. Proceeds will go to the MAPA Scholarship Fund and Academic Institution Donation Fund. The ticket cost for this event is $150 (Before June 24) and $190 (June 24 and After). Ticket includes lunch, green fee, ½ cart, beer/soda on the course, dinner and prizes. Limited to the first 144 players. Visit www.asphaltisbest.com/events to register online or download the registration form. If you need to switch out a member of your foursome after registering, please contact MAPA Event Coordinator, Grace Gothers at graceg@ewald.com. For more information on the above event, contact MAPA, 1000 Westgate Drive, Suite 252, St. Paul, MN 55114. Phone: 651/636-4666. Email: info@mnapa.org.

NATIONAL ASSOCIATION OF WOMEN IN CONSTRUCTION (NAWIC) The Dawn of a New Era: NAWIC 65th Annual Conference VIRTUAL EVENT Dates: August 12 – 14, 2020 Now that we have made the transition to virtual for NAWIC’s 65th Annual Conference (and FIRST ever VIRTUAL conference), we are truly in The Dawn of a New Era! NAWIC Annual Conference aims to create a support network for others like themselves. Women in Construction of Fort Worth was so successful that it gained its national charter in 1955 and became the National Association of Women in Construction. Today, NAWIC provides its members with opportunities for professional development, education, networking, leadership training, public service and more. In addition to keynote speakers, countless seminars and panel discussions, our Industry Council Networking this year provides an opportunity for you to meet and interact with fellow NAWIC members and colleagues in the construction industry during lunch breaks and at designated times through each day of the Virtual Conference. You definitely won't want to miss out on these! The registration fee for this conference is $350 for members and $400 for non-members. Your registration fee this year includes: • Free Conference T-shirt and Pin! • Registration packet that includes goodies from sponsors and partners! (To be mailed after conference) • Access to all conference materials and recordings for TWO DAYS after the end of conference – in case you can’t catch everything in “real time”! Register today! For more conference details and to purchase tickets for the NAWIC Virtual Conference, visit https://www.nawic.org/nawic/ Annual_Conference.asp ASSOCIATED BUILDERS AND CONTRACTORS (ABC) ABC Convention 2020 Dates: August 17 – 19, 2020 Place: Music City Center 201 Fifth Avenue South, Nashville, TN 37203 ABC members are building Music City, and its the perfect backdrop for ABC Convention 2020. Nashville, a top convention destination known for its honky-tonks, food and arts scene, is also a great place to get inspired by keynote speakers, network with ABC peers and celebrate the accomplishments of merit shop contractors from across the country. Registration for ABC Convention 2020 is open to ABC members, chapter staff and guests sponsored by a member or chapter. If you are a nonmember interested in attending, please email meetings@abc.org for more information. ABC Convention is a closed event. All attendees must be registered and display an event badge to access to any of the ABC Convention events. Advanced registration will close on Monday, August 10. ABC is offering an attractive registration fee that incentivizes attendees to take part in all elements of the August convention. The fee has been reduced to $475. No a-la-carte registration options are available, with the exception of the Excellence in Construction® Awards gala* and the National Craft Championships day pass. If you plan to attend the August Convention and have not yet reached out to us, please email meetings@abc.org to confirm your registration. For more information and to register for this event, please visit http://abcconvention.abc.org..or contact Associated Builders and Contractors, 440 1st St., N.W., Ste., 200, Washington, D.C. 20001. Phone: 202/595-1505 Email: gotquestions@abc.org. ENGINEERING NEWS-RECORD (ENR) Groundbreaking Women in Construction VIRTUAL Conference Dates: August 24 – 27, 2020 NEW DECADE ... NEW DRIVERS ... NEW DECISIONS ENR’s Groundbreaking Women in Construction (GWIC) conference in San Francisco was a success last year with record breaking attendance and enlightened discussion on critical workforce topics. We welcome you be a part of our first ever virtual conference this August 2020! GWIC is much more than just a conference. It is recognized as one of the industry’s premier leadership and talent management events—a catalyst for change to inspire women at all levels to develop their leadership skills, expand their influence and boost industry growth potential. Our varied programming and virtual event platform will allow you and your peers to share, learn, challenge and inspire each other to contribute to your workplace and employer and realize career success! Register today! For more information on the GWIC Virtual Conference, visit https://www.enr.com/groundbreaking-women-in-construction. HISTORICAL CONSTRUCTION EQUIPMENT ASSOCIATION (HCEA) 35th Annual International Convention and Old Equipment Exposition (POSTPONED UNTIL 2021) Dates: August 27 – 29, 2021 Instead of being held this August, it has been rescheduled for August 2021, at the same location near Concordia, Kansas, with the same outstanding attractions. Thank you for your patience and understanding. Be well, and see you at the 2021 Convention! SHEET METAL & AIR CONDITIONING CONTRACTORS’ NATIONAL ASSOCIATION (SMACNA) The SMACNA Edge Conference: A Virtual Education Forum Dates: October 13 – 15, 2020 With member health and safety top of mind, SMACNA has cancelled the 2020 Annual Convention planned for Colorado and is now offering The SMACNA Edge Conference, A Virtual Education Forum, October 13-15, 2020. This new virtual experience will provide amazing content, expert speakers and valuable information on the most relevant and important topics to members. For any questions regarding Convention cancellation, please contact John Franco at jfranco@smacna.org or Kristin De Guzman at kdeguzman@smacna.org. Keep up to date on this event at www.smacna.org/annualconvention.

Events are subject to change, check websites for updates

Page 68 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (USA): AKERMAN MOTOR GRADERS, ALL MODELS. PLEASE LET US KNOW IF YOU HAVE ANY MACHINE LIKE THIS (WORKING OR NON). EMAIL: HIEEQUIPMENT@GMAIL.COM; PHONE: 775-235-8837 –––––––––––––––––––––––––––––––– WANTED: 3-AXLE, HEAVY DUTY LOW BOY TRAILER FOR HAULING A CAT 963. EMAIL: BENHOOVER@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CT): CASE 1455B CRAWLER LOADER. EMAIL: HENRYINDUSTRIES@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (IL): NEED MANUALS AND PARTS FOR 1970 BARBER-GREENE TF-30 DRAINAGE TRENCHER (TILING MACHINE). EMAIL: JL.FOMAC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): BATTERY BOX FOR A KOMATSU PC170LC-11. EMAIL: MROBERSON@ LYLEMACHINERY.COM PHONE: 601-624-1124 –––––––––––––––––––––––––––––––– WANTED (FL): MORBARK 4600XL GRINDER. EMAIL: RKCLANDDEVELOPMENT@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): TRANSMISSION FOR EARLY '90S VINTAGE P&H CENTURY RT50. EXISTING IS A SHINKO RCM2509B S/N 0005. PARTS OR SUBSTITUTE TRANNY OR ENGINE/TRANS CONSIDERED. EMAIL: MIKE.SMITH@ CERTIFIEDBOOMREPAIR.COM PHONE: 813-247-1963 –––––––––––––––––––––––––––––––– WANTED (CA): BOBCAT T550 COMPACT TRACK LOADER. EMAIL: CINDYLARK4@MSN.COM –––––––––––––––––––––––––––––––– WANTED (PA): REXWORKS INC MAXIGRIND 425 GRINDER. EMAIL: HENRYINDUSTRIES@YAHOO.COM; PHONE: 814-371-8010 –––––––––––––––––––––––––––––––– WANTED (PA): FORD F700 HOOK LIFT TRUCKS - WORM GEAR AND SHAFT ASSEMBLY FOR COMPACT MODEL H-L SIDE-O-MATIC BOOM UNLOADER COMPACT 2 7-63-5C DICO CONTINUOUS SERIES. EMAIL: INFO@LESNEYCONCRETE.COM PHONE: (724) 224-8703 –––––––––––––––––––––––––––––––– WANTED (USA): HYUNDAI ATTACHMENTS - LOOKING FOR A GOOD USED GP BUCKET 4-6 CU.YD. FOR A 1996 HYUNDAI HL770 LOADER. EMAIL: DONNIE@RADIATIONCLEANTECH.COM; PHONE: 601-319-9453 –––––––––––––––––––––––––––––––– WANTED (NY): BANDIT 65 WOOD CHIPPER - USED BRUSH BANDIT 65XP, 75XP, 2002 OR NEWER, 35HP MINIMUM. EMAIL: DSPTECH11@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (USA): HITACHI EX400LC-1 EXCAVATOR EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR 1000LB FRONT COUNTERWEIGHT FOR CASE 455C CRAWLER LOADER. EMAIL: ROGERPF1@FRONTIERNET.NET; PHONE: 570-639-3058 –––––––––––––––––––––––––––––––– WANTED (US): CAT 311, 312, 315, 320, 325, 330, 336 CL,DL,EL EXCAVATORS UNDER 8000 HOURS. EMAIL: REBUILD@TUSCO.NET; PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: AMPHIBIOUS EXCAVATORS, ALL MAKES AND MODELS, NEW OR USED + ALL MAKE AND MODEL BOOMS AND STICKS LONGER THAN NORMAL + ALL MAKE AND MODEL BROKEN BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US); LOOKING FOR PILOT VALVE 9137384 FOR HITACHI 200LC-3 EXCAVATOR. EMAIL: PJUREKX1@GMAIL.COM; PHONE: 585-492-2449 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR OFFHIGHWAY TRUCKS - I NEED #5 CAT 775D &E ROCK BEDS ONLY. ONLY NEED BEDS. EMAIL: WEBBPAGE1@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS WANTED - SCHWING, PUTZMEISTER, ALLIANCE, CIFA, ETC. ALL MODELS, BRANDS, SIZES. OLD OR NEW! BOOM PUMPS,TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD RETIRED, NO LONGER USED & PARTS PUMPS ALSO PURCHASED. EMAIL INFORMATION A.S.A.P. INSTANT PAYMENT GUARANTEED !! FINDERS FEES PAID!!! EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (PA): I’M LOOKING FOR A PUSH THERMOPLASTIC MACHINE. CAN BE ANY BRAND. EMAIL: HELLOELISA@ICLOUD.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 330-336 DL SERIES EXCAVATORS EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (RI): CATERPILLAR 4+ MISCELLANEOUS EQUIPMENT. I AM HELPING A FRIEND TO FIND A PART FOR HIS CAT MODEL 426, SERIAL #7BC02647, PART #9R383. IT WOULD BE REALLY HELPFUL IF THIS PART WAS AVAILABLE IN EASTERN USA, ESPECIALLY IN THE NORTHEASTERN STATES, AND AVAILABILITY, PRICE, AND SHIPPING ARE IMPORTANT IF THE PART IS AVAILABLE ELSEWHERE. THANK YOU FOR YOUR HELP. EMAIL: JOETTAKIRK@AOL.COM ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR D8R CRAWLER DOZER. LOOKING FOR ORIGINAL 2018 D8R CATERPILLAR BULLDOZER. EMAIL: ARABHURUR@GMAIL.COM; PHONE: +251-911513133 –––––––––––––––––––––––––––––––– WANTED (SC): ALL MODELS BRADCO TRENCHING / BORING / CABLE PLOWS; LOOKING FOR 3 PT HITCH 3 OR 4 FOOT TRENCHER 6" WIDE FOR REAR KUBOTA EMAIL: PEPPERJACKPM@YAHOO.COM; PHONE: 803-460-2600 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR EXCAVATORS. LOOKING FOR USED AMPHIBIOUS EXCAVATORS, MARSH BUGGIES AND MARSH MASTERS - ANY BRAND. ALSO LOOKING FOR BROKEN/DAMAGED LR BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): INGERSOLL RAND AIR COMPRESSOR, MODEL 125 CFM. NEED EXHAUST/INTAKE MANIFOLD FOR A CONTINENTAL G193A GAS ENGINE WHICH IS IN THE I/R GYRO FLOW 125 COMPRESSOR. EMAIL: HFINCHTTD@FONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED (VA): FORD 1920 758B BACKHOE ATTACHMENT. EMAIL: CONWELL1208@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): USED HITACHI EXCAVATORS EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92-332-248-9350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): 1-FINAL DRIVE & CONTROL VALVE ASSEMBLY, 2-ENGINE WIRING HARNESSES, HOODS, DISPLAY MODULES & ECU'S SN #FGY0381 FOR SAMSUNG SE240 LC-3 EXCAVATOR. EMAIL: TVHCSHOP@GMAIL.COM; PHONE: 920-735-1221 –––––––––––––––––––––––––––––––– WANTED (KS): CAT 922B INJECTION FUEL LINE. I NEED ALL 4 FOR MY 1960'S DIESEL FRONT-END LOADER. EMAIL: BLACKNIGHT64R@ATT.NET –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADER 950B, 950E, 966E, 966F, 966FII. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS EX200, EX270LC, EX400, EX400LC. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM. –––––––––––––––––––––––––––––––– WANTED: LINCOLN WELDERS, MODELS 250/300/225. I'D LIKE TO BUY USED MACHINES LOW HOURS. EMAIL: JONATHANDAYTON4@GMAIL.COM; PHONE: 806-292-7452 –––––––––––––––––––––––––––––––– WANTED (CA): JOHN DEERE 330 EXCAVATOR. EMAIL: JIMWLAMBERT@HOTMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (NM): BARBER GREENE BG-225B SLAT CONVEYOR, COMPLETE LEFT SIDE. EMAIL: JR_STRIPING@LIVE.COM –––––––––––––––––––––––––––––––– WANTED (US): LOOKING FOR CME 45 WITH DEUTZ DIESEL DECK ENGINE AND AUTOMATIC HAMMER. ANY CONDITION. EMAIL: GEONETICS@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (IL): HAULOTTE AERIAL LIFT, ALL MODELS. LOOKING FOR A TOWABLE BOOM LIFT. EMAIL: SAWMANDAN@SBCGLOBAL.NET PHONE: 630-553-7612 –––––––––––––––––––––––––––––––– WANTED (MI): ALL MODEL KUBOTA WHEEL LOADERS. EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: 616-813-3642 –––––––––––––––––––––––––––––––– WANTED (NV): CATERPILLAR 14G MOTOR GRADER. EMAIL: SALES1@HIEEQUIPMENT.COM PHONE: 7025295171 –––––––––––––––––––––––––––––––– WANTED (USA): LOOKIN FOR A GOOD USED KOMATSU PC 400-5 EXCAVATOR EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 –––––––––––––––––––––––––––––––– WANTED (USA): TAKEUCHI TB0-35 AND 135 WITH CABS. RUNNING OR FOR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR COMPACT TRACK LOADERS, USED CATERPILLAR SKID STEER LOADERS 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XE. EMAIL: LSGLOBAL@NVER.COM –––––––––––––––––––––––––––––––– WANTED (USA): A GOOD USED C-12 CAT ENGINE FOR A SHORT NOSE 2000 PETERBILT 379 ROAD TRACTOR. ENGINE TO HAVE CORRECT ECM AND S# BEGINS WITH 2KS , 380 MIN. HP. CONTACT JIM ARNETT JARNETTJR@ORBITSDO.COM; CELL# 937-603-3965. –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR D11 CRAWLER DOZERS - INTERESTED IN PARTS FOR LARGE DOZERS FOR COAL MINES AND AGGREGATE QUARRIES. EMAIL: BIGIRONLUNS87@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 315,320,325,330,336 DL SERIES EXCAVATORS UNDER 8000 HOURS AND WHOLESALE PRICED MACHINES. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: TAKEUCHI MINI EXCAVATORS TBO-35’S WITH CABS, RUNNING MACHINES AND/OR PARTS. PHONE: 443-392-5789 ––––––––––––––––––––––––––––––––

WANTED (NY): LOOKING FOR USED 5 TON WIRE ROPE HOIST TO RUN ON A PATENT TRACK EMAIL: INFO@ BRIDGEHAMPTONSTEEL.COM PHONE: 631-537-2486 –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR 330C L EXCAVATOR - LOOKING TO BUY CATERPILLAR 330CL & 330DL IN GOOD RUNNING CONDITION. EMAIL: RIZ@MEGAEQUIPMENTS.COM PHONE: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS TRENCOR TRENCHING / BORING / CABLE PLOWS. EMAIL:ADMIN@MITCHELLHOPPER.COM PHONE: 432-888-2593 –––––––––––––––––––––––––––––––– WANTED (FL): BOBCAT MT50 COMPACT TRACK LOADERS EMAIL: EIDNKSLJK@ICLOUD.COM PHONE: 6039 2I28 939 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS CATERPILLAR WHEEL LOADERS. LOOKING TO BUY ANY CAT LOADER AT WHOLESALE PRICE. EMAIL: MARKETING@ GCESEQUIPMENT.COM PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (TX): ALL MODELS CATERPILLAR MOTOR GRADERS. EMAIL: MAGDIELLERMA@GMAIL.COM PHONE: 956-432-7379 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR WHEEL LOADERS. CAT 966H OR K WITH UNDER 10,000 HOURS, BUCKET, COUPLER. SET OF FORKS IS A PLUS. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (WV): ALL MODELS TERRAMITE BACKHOE LOADERS - CHECKING PRICES FOR TERRAMITE T7 FRON RIM FOR SERIAL NUMBER 227X0102. EMAIL: EDWINANDDIANA@FRONTIER.COM –––––––––––––––––––––––––––––––– WANTED (FL): CASE CRAWLER DOZERS, ALL MODELS. EMAIL: JABOWEND@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOBELCO K907D EXCAVATORS - MAIN HYDRAULIC CONTROL VALVE (907D) SERIAL #LN7001 TO YG0501. KOBELCO PART # 2436U1165F2, KAWASAKI TAG # KMX15A/23009 ALSO USED ON YUTANI 1986, MODEL 195. EMAIL: PTSCOTT@HTVA.NET –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU ATTACHMENTS - SKELETON BUCKET FOR KOMATSU 220 EXCAVATOR 54" TO 60". CAN ADAPT FROM OTHER MACHINES AS LONG AS ITS 80 MM PINS. EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 ––––––––––––––––––––––––––––––––

WANTED (USA): HYDRA-MAC 1700 SKID STEER LOADER. EMAIL: MALONEYFARM.1@ WINDSTREAM.NET –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR EXCAVATORS, ALL MODELS. EMAIL: PAUL@HEAVYSURPLUS.COM; PHONE: 214-625-2652 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D5B OR D6C CRAWLER DOZER. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 970F WHEEL LOADER. EMAIL: SALES3@GCESEQUIPMENT.COM; PHONE: 657-347-6605 –––––––––––––––––––––––––––––––– WANTED (GA): KOBELCO EXCAVATORS, ALL MODELS. MINI- OR MIDIEXCAVATOR. USED. UNDER 2000HRS. CA 35 T0 40 HP FULLY FUNCTIONAL. THUMB EMAIL: JKSAPP@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (US): LIMA CRANE – ANY LIMA 2400B MACHINES IN ANY TYPE OF CONDITION. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D8T CRAWLER DOZER. LOOKING FOR MACHINE WITH ISSUES AND/OR HIGHER HOURS, AT A WHOLESALE PRICE. BUYER WANTS MACHINE CHEAPER THAT HE CAN PUT THROUGH HIS SHOP AND REFURBISH AS NEEDED. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (US): YANMAR YFW55R DUMPERS - FINAL DRIVE OR A PARTS MACHINE. EMAIL: ORDERS@LEWEQUIP.COM; PHONE: 724-887-9375 –––––––––––––––––––––––––––––––– WANTED (US): GEHL DL-10H-55 TELEHANDLERS / FORKLIFTS - SN # 10H55JR024028 NEED PART # L71553. EMAIL: JEFF.JAEGER@HOTMAIL.COM; PHONE: 345-925-9709 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT S175 SKID STEER LOADERS; ANY STATE NEAR ARKANSAS WOULD BE HELPFUL. EMAIL: BRIANFITZJURLS@GMAIL.COM; PHONE: 479-847-4202 –––––––––––––––––––––––––––––––– WANTED: LINK-BELT LS-348H CRANE – LOOKING FOR THE BOOM WIRE WRAP FOR A LINK-BELT 348 HYLAB , S/N L9J89965. EMAIL: POWERALEXHEAVY EQUIPMENT@GMAIL.COM PHONE: 386-496-1340 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 69

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS

• Orlando, FL August 27, 2020

www.lyonauction.com 315-633-2944

• Phoenix, AZ August 28, 2020

• Barnesville, OH Fri., July 31, 2020 For: Late Model Construction Equipment & more • Attleboro, MA Sat., August 1, 2020 For: Construction Equipment, Trucks, Support & more • New Castle, PA Fri., August 7, 2020 For: 2 Job Completions. Construction Equipment & more • ONLINE ONLY Fri., August 7, 2020 For: Late Model Construction Equipment (Queretaro, Mexico) • Buffalo, NY Sat., August 8, 2020 For: Construction, Agriculture, Aggregate Equipment & more • Rome, NY Sun., August 9, 2020 For: Estate Auction • Dallas, TX Tues., August 11, 2020 For: Late Model Rental Fleet Construction Equipment & more • Houston, TX Thurs., August 13, 2020 For: Acquisition. Construction & Agricultural Equipment • West Milford, NJ Sat., August 15, 2020 For: Winter Job Completion

• Kiefer, OK September 2, 2020 • Mountain West Regional Event September 8, 2020 • Atlanta, GA September 9, 2020 • Northeast Regional Event September 16 - 17, 2020 • Sacramento, CA September 23, 2020 • Midwest Regional Event September 29 - 30, 2020

ABSOLUTE AUCTION & REALTY, INC.

Coming Auctions

• ONLINE ONLY Tues., August 11, 2020 For: Virtual Live Farm & Construction Equipment

To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• ONLINE ONLY Tues., August 25, 2020 For: Virtual Live Farm & Construction Equipment

• ONLINE ONLY August 5, 2020 • ONLINE ONLY August 12, 2020 • ONLINE ONLY August 19, 2020 • ONLINE ONLY August 26, 2020

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

www.AARauctions.com 800-243-0061

• Marietta, PA Fri., August 14, 2020 For: Trucks, Trailers & Equipment

• Hyde Park, NY Sat., July 25, 2020 For: Surplus Vehicle & Equipment

HUNYADY AUCTION COMPANY

BAR NONE AUCTION

www.hunyady.com 800-233-6898

www.barnoneauction.com 866-372-1700 • Online/Portland, OR Fri., July 31, 2020 For: Monthly Public Auction • Online/Sacramento, CA Sat., August 8, 2020 For: Monthly Public Auction • Online/Portland, OR Fri., August 28, 2020 For: Monthly Public Auction

• Live Virtual Online Thurs., July 30, 2020 For: John Boyd Construction & Equipment Inc. Absolute Auction

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

BIDADOO AUCTIONS

• ONLINE ONLY Wed., July 29, 2020 For: Heavy Equipment, Truck & Trailer Auction

www.bidadoo.com 1-877-BIDADOO

J.J. KANE AUCTIONEERS

• Tampa, FL Wed., August 26, 2020 For: Major Job Completion, Very Late Model Construction Equipment

• ONLINE ONLY July 28, 2020

www.jjkane.com 856-764-7163

• ONLINE ONLY August 4, 2020

RITCHIE BROS. AUCTIONEERS

• ONLINE ONLY August 18, 2020

• TIMED ONLINE ONLY July 29 - 30, 2020 For: Construction, Utility Equipment and more (Concord, NC)

www.rbauction.com 402-421-2631

• ONLINE ONLY August 25, 2020

All our auctions are now online bidding only!

• ONLINE ONLY September 1, 2020

• Fort Worth, TX July 28 - 29, 2020

• ONLINE ONLY September 8, 2020

• Albany, NY Sat., August 22, 2020 For: Complete Liquidation, Retirement Auction

• ONLINE ONLY August 11, 2020

• Denver, CO August 5, 2020

BIG IRON

• Tipton, CA August 12, 2020

www.bigiron.com 800-937-3558

• Houston, TX August 25 - 26, 2020

• ONLINE ONLY July 29, 2020

• TIMED ONLINE ONLY Wed., August 12, 2020 For: Construction, Utility Equipment and more (Shrewsbury, MA)

J.M. WOOD AUCTION COMPANY

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • ONLINE ONLY July 30 – August 6, 2020 For: Kenmore Heavy Equipment, Contractors Equipment & Vehicles

PAUL E. SAPERSTEIN INC. www.pesco.com 800-660-6553 • Braintree, MA Wed., July 29, 2020 For: Sale @ Public Auction Graziano Brothers

• Fort Meyers, FL August 7 - 8, 2020 For: Heavy Equipment, Industrial Machinery, Trucks & Trailers, Commercial Vehicles & more

RTI AUCTIONS www.teitsworth.com 585-243-1563

• ONLINE ONLY August 1 - 4, 2020 For: Empire Farm Days 2020

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

JEFF MARTIN AUCTIONEERS, INC.

PURPLE WAVE AUCTION

www.jeffmartinauctioneers.com 601-450-6200

www.purplewave.com 866-608-9283

• West Fargo, ND Wed., July 29, 2020 For: AgIron West Fargo Event

• ONLINE ONLY Tues., July 28, 2020 For: Vistra/Luminant Online Power Plant Auction

• ONLINE ONLY Tues., July 28, 2020 For: City of Sioux Falls SD Auction

• ONLINE ONLY July 30 – Aug. 6, 2020 For: Construction Consignment Auction

• ONLINE ONLY July 29 - August 4, 2020 For: East Coast Heavy Equipment & Truck Auction

• ONLINE ONLY Wed., July 29, 2020 For: Ag Equipment Auction

• ONLINE ONLY August 7 - 12, 2020 For: Timed Online Upper Midwest Locations

• Brooklyn, MS August 7 - 8, 2020 For: Early Fall Construction & Transportation Public Auction • ONLINE ONLY Tues., August 11, 2020 For: Government Asset Auction • ONLINE ONLY August 12 - 18, 2020 For: Absolute Auction Kaolin Mining Equipment & Related items

• ONLINE ONLY Thurs., July 30, 2020 For: Truck & Trailer Auction • ONLINE ONLY Thurs., July 30, 2020 For: Paragon Contracting LLC Auction • ONLINE ONLY Tues., August 4, 2020 For: Government Auction • ONLINE ONLY Wed., August 5, 2020 For: Vehicles & Equipment Auction

• Pelzer, SC Thurs., September 24, 2020 For: East Coast Construction & Transportation Auction

• ONLINE ONLY Thurs., August 6, 2020 For: Construction Equipment Auction

JOEY MARTIN AUCTIONEERS

• ONLINE ONLY Wed., August 12, 2020 For: Ag Equipment Auction

www.joeymartinauctioneers.com • ONLINE ONLY 864-940-4800 Thurs., August 13, 2020 For: Truck & Trailer Auction • Cope, SC Sat., August 15, 2020 • ONLINE ONLY For: Lowcountry Heavy Tues., August 18, 2020 Equipment Public Auction For: Government Auction

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811

www.jmwood.com 800-447-7085

• ONLINE ONLY Tues., July 28, 2020 For: Virtual Live Farm & Construction Equipment

• Montgomery, AL September 22, 23 & 25, 2020 For: Trucks, Construction, Ag & Forestry Auction

• ONLINE ONLY Tues., August 4, 2020 For: Virtual Live Farm & Construction Equipment

• ONLINE ONLY Wed., August 19, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., August 20, 2020 For: Construction Equipment Auction

ROYAL AUCTION GROUP, INC. www.royalauctiongroup.com 239-936-4121

• ONLINE ONLY August 7 - 17, 2020 For: Kibble Equipment Auction • ONLINE ONLY August 21 - 26, 2020 For: Timed Online Upper Midwest Locations • Campbell, MN Thurs., August 27, 2020 For: Antique Tractor & Classic Car Auction

VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Live Virtual Auction Sat., July 25, 2020 For: July 2020 Auction • Live Virtual Auction Sat., September 26, 2020 For: September 2020 Auction

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Perris, CA Fri., August 7, 2020 For: Public Auction

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., August 8, 2020 For: Live & Online Public Auction

Page 70 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Jeff Martin Hosts Equipment, TruckAuction in Columbus

Jim and Kathy Weber of Ohio Mulch monitored the sale’s progress. Due to equipment updates and business acquisitions, many of the items up for bid were provided from their company’s surplus.

George Tatman (L) and Frank Vlack of Allied Development Group Inc. had their eye on several items, including this Doosan wheel loader.

s Jeff Martin Auctioneers returns to its popular auction format featuring onsite and online bidding, the company has taken every precaution to ensure that its auctions are both highly successful and safe for those in attendance. The company’s recent Central Ohio Heavy Equipment and Truck Auction, held in Columbus, Ohio, on July 9 was no exception. The auction included a wide selection of construction equipment, including excavators, skid steers, screening machines and equipment as well as a variety of trucks. A significant portion of the equipment up for bid at the auction was provided by Ohio Mulch and included surplus inventory resulting from the company’s business acquisitions and equipment upgrades. The auction drew a sizable crowd on onsite equipment buyers while attracting strong online bidding as well. For more information, visit jeffmartinauctioneers.com.  CEG

Jeff Martin of Jeff Martin Auctioneers oversaw the auction activities to ensure that everything ran smoothly.

Adelman’s Truck Parts and Sales’ Jordan Adelman reviewed the lineup of trucks offered for auction.

(L-R): Ed Workman of S&L Core joined Calvin Jewel of Hauling Solutions, Bill Jenkins and John Effah of Direct Trucking and Repair in search of skid steers and trucks at the auction.

Gerald Keeton of Deets Excavating and Concrete thought this service truck would make an excellent addition to the company’s fleet.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 71

Page 72 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

I-74 Bridge Replacement Improves Access Across Mississippi KEYSTONE from page 32

According to Ryan, plans are to Iowa Department of Transportation photo begin erection of the eastbound from nearly every angle via live bridge arch later this year. streaming on social media, local TV “On land, most of westbound I-74 and the project webcams.” roadway is complete in Moline and He reported that the next chalBettendorf,” Ryan said. “This year, lenge will be installing the arch floor the Iowa and Illinois departments of system, which will be done this sumtransportation are reconstructing mer. eastbound I-74 in Moline and “The arch floor, which will be Bettendorf. An eastbound detour supported by hangers, is a complex route was implemented this spring in structure that also will require extensive coordination and precision,” he The full dollar amount of the overall project is estimat- Moline to accommodate construction of the interstate. Work on easted at $1.2 billion. said. bound lanes in Bettendorf is anticiThe size of the floor sections varies but the largest is approximately 102 rier from traffic) connecting to existing paths pated to begin this summer.” He stated that the goal is to complete the by 160 ft. and the heaviest section is about on both sides of the river. The project corridor is about 5 mi., new westbound I-74 bridge by the end of 300 tons, according to Ryan. They are being according to Ryan. Total concrete on all let 2020. Both westbound and eastbound traffic pre-assembled off site. “Two cranes will lift and place the arch contracts is 110,545 cu. yds. Total rebar on will be switched (in stages) to the newly floor sections over the navigation channel — all let contracts is 30,204,641 lbs. and total completed bridge to facilitate completion of the Manitowoc 650 and Manitowoc 18000,” structural steel on all let contracts is eastbound I-74. The project website reports that a large he said. “One hundred and eight hangers will 70,252,318 lbs. Ryan reported that many subcontractors number of mussels inhabit the Mississippi be connected from the arch to the floor sections as each section is installed to support are working on the project, with more than River within the project area. The project 50 from the region. Some of the main sub- team is working closely with the U.S. Fish the arch floor/deck.” The bridge is one of only a few bridges contractors located in the Quad Cities and and Wildlife Service to mitigate impacts on crossing the Mississippi River in the Quad completing various contracts are Hahn these federally protected species. More than 140,000 mussels (29 species) Cities. The new bridge will be multimodal. Ready Mix, River City Cutting and Coring, The new eastbound bridge will include a Terracon Consultants, Valley Construction, were relocated from the shorelines and around the piers of the project prior to the pedestrian/bicycle path (separated by a bar- Toppert Jetting and Tri-City Electric.

start of construction. This was done in September 2016 by the Iowa Department of Transportation and the Illinois Department of Transportation. This relocation effort was reportedly one of the largest in the country. A second phase of mussel relocation will take place in advance of the demolition of the existing I74 bridge. History According to the project website, I-74 Mississippi River Bridge historically has provided an important east-west link in the nation’s transportation network. It crosses the Mississippi River on two separate structures. The westbound bridge — Illinois to Iowa — was completed and opened in 1935. The eastbound bridge — Iowa to Illinois — was completed in 1959 and opened in 1960. In 2016, traffic on the I-74 bridges across the Mississippi River exceeded a 74,000 average daily traffic count. It is estimated that traffic volumes will rise to approximately 99,900 vehicles per day by 2035, according to traffic projections endorsed by the BiState Regional Commission. Growing population and employment during the past several decades have led to increased traffic volume.  CEG

New Hours of Service Rules to Take Effect in Sept. 2020 RULES from page 8

Status (RODS) using an Electronic Logging Device (ELD). “The short-haul exception for property drivers is likely the most used exception to the HOS rule. Allowing Commercial Driver’s License drivers that report daily to the same location to drive a Commercial Motor Vehicle without completing RODS or using ELDs, it affects every industry that uses CDL drivers.” The short-haul exception previously specified that drivers could operate only within a 100 air-mile radius and work 12-hour shifts. With one air mile equaling approximately 1.15 land miles, the benefits of the distance and time extensions in the revised rule is significant, believes Ross. “It will allow businesses to expand operations without creating RODS or rotating drivers to keep them eligible for the exception within a rolling 30-day period. The new rule will be much like the short-haul exception applied to vehicles that do not require a CDL. Addressing a shortage of CDL drivers, this rule may also help businesses outside the trucking industry to pursue additional work because they will need fewer CDL drivers,” he wrote.

The rule expands the driving window during adverse driving conditions by up to an additional two hours. Though it still allows only 12 hours of driving, the rule increases the driving window from 14 to 16 hours for property carriers and 17 hours for passenger carriers under adverse driving conditions. The definition of “adverse conditions” remains the same, noted Ross, but the new rule specifies drivers may determine when such conditions exist. “Finding that expanding the driving window will encourage slower driving and provide drivers more time to both complete their run or reach a safe location, the FMCSA believes that the rule change will make the roads safer,” he wrote. The HOS rule requires a 30-minute break after eight hours of driving time instead of on-duty time, and allows an on-duty/not driving period to qualify as the required break. The current rule reads that drivers are off-duty during their break and must take a break after being on-duty for eight hours, regardless of their time spent driving. A driver not actively driving for at least 30 minutes counts as the required break. “The agency believes that this rule will not decrease the breaks that drivers take, instead supplying flexibility for when they

take a continuous 30-minute break. Now drivers can count paperwork, fueling and loading and unloading as breaks,” noted Ross. The revision modifies the sleeper berth exception to allow a driver to meet the 10hour minimum off-duty requirement by spending at least seven, rather than at least eight hours of that period in the berth. It also specifies a minimum off-duty period of at least two hours spent inside or outside of the berth, provided the two periods total at least 10 hours, and that neither qualifying period counts against the 14-hour driving window. Currently, the sleeper berth rule requires an eight-hour period in the berth and a twohour off-duty period that counts against the driving window. “Considering that most drivers sleep between six and eight hours, the FMCSA reasons that requiring them to spend a full eight hours in the sleeper berth simply limits their ability to take more rest breaks,” wrote Ross. “The new rule requires that drivers are off duty for 10 hours broken into two periods: one of at least seven hours in the sleeper berth, and one of at least two hours off-duty. Together, neither counts against the driving window,” he continued. Like the other changes, this revision to the

sleeper berth rule gives drivers more flexibility, allowing them to take more breaks to nap and rest, noted Ross. “The FMCSA believes that this change will increase efficiency while maintaining safety, because studies show that most drivers sleep between six to eight hours and naps and breaks allow drivers to avoid physiological sleepiness or performance deficits.” Saving Lives, Money FMCSA’s rule “modernizing” hours of service regulations is estimated to provide nearly $274 million in annualized cost savings for the U.S. economy and American consumers, said Chao in announcing the final rules. “The trucking industry is a key component of the national economy, employing more than seven million people and moving 70 percent of the nation’s domestic freight,” she continued. “FMCSA’s final rule is crafted to improve safety on the nation’s roadways. The rule changes do not increase driving time and will continue to prevent commercial motor vehicle operators from driving for more than eight consecutive hours without at least a 30minute break.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 73

AUC UCTIO ON

OPENS: Thursdayy,, July 30

CLOSES: T THURSDAY Y,, AUGUST 6 | 3PM TO INCLUDE: Wheel Loaderrs, Telehandler, Dozers, Excavaators & Attachments, Motor Grrader, Trenching & Boring Equipment, Aerial Lifts, Other Construction Equipment, ment, Semi Tractors, Vac, Jetteer & Water Trucks, Boom & Box Trucks, Service & Other Pickups, Vacuum Traailers, Tanker a Trailers, End & Belly Dump Trailers, Other Traillers, Trailers For Storage Only, Non-Roadable, N Other Equipmentt

SteffesGroup.com S Stef t fff esGr e G oup o p . c om o

Steffes Group, Inc., 2000 Main M Ave East, West Fargo, ND D 58078

701.237.9173 70

800.7 726.8609

TERMS: All items sold as is where is. Payment of cash or o check must be made sale day before removal of items. Sttatements made auction day take precedence over all advertising. sing. $35 documentation fee applies to all titled vehicles. Titles will be mailed. Canadian buyers need a bank letter of credit to facilitate border transfer. Scott Steffes S ND81, MN14-51; Brad Olstad ND319, MN14--70; Max Steffes ND999, MN14-031; Justin Ruth ND2019, D2019, MN14-041; Ashley Huhn ND843, MN47-002; 2; Eric Gabrielson ND890, MN47-006; Randy Kath ND894, ND894 MN47-007; MN47 007; Shelly Weinzetl ND963, ND963 MN86-79; N MN86 79; Scott Gillespie ND1070, ND1070 MN14-3 MN14 330

MDOT’s Improvements Will Improve Safety, Mobility Along Bustling I-496 MDOT from page 36

“The first milestone on the project will be the completion of phase one, with the reconstruction of eastbound having been completed. The second milestone is associated with the completion of phase two, with westbound being reconstructed. The last milestone will be the final completion of all contract work in the summer of 2021.” The project site consisted of 5.55 mi. of heavily-distressed existing concrete pavement. There also were a number of bridges along the I-496 corridor that were in need of rehabilitation. The sand subbase is being regraded to adjust elevation and alignment for safety improvements. The existing concrete pavement is being removed, crushed and placed as an open graded drainage course before the proposed concrete pavement is placed. The median also is being regraded to improve the overall project drainage. As far as reconstructing the freeway and ramps, the Creyts, Waverly and

ramps to and from I-96 will be reconstructed with each bound of I-496, as the bounds are closed. The acceleration lanes will be extended to improve the merge areas and overall safety for the public. The operational improvements also will enhance function. The acceleration ramps will be removed and extended for improved operation and enhanced safety. The northbound ramp to westbound I-496 also will be eliminated to delete a loop ramp with a short entrance ramp that would require extensive bridge work to address otherwise. A signal will be added and the ramp to westbound I496 from northbound and southbound Waverly Road will be combined. “There is a wide variety of heavy machinery, much of it Caterpillar, on site,” said Early. “Crews are using numerous excavators, backhoes and bulldozers — mainly D3s and D6s — earth movers, graders and off-road dump trucks. There also are many gravel trains on site. Additionally, there is specialty equipment, including the

concrete crusher and the portable concrete batch plant.” The most critical materials being incorporated into the project are concrete pavement, open-graded drainage course crushed concrete and sand subbase. The plan quantity for earth excavation is 409,692 cu. yards of granular material. The construction of the proposed concrete pavement will take the most time, as the contract work is completed. The time invested in the construction of the pavement will result in the most durable, highest quality pavement possible, and will maximize the investment in this infrastructure project. Said Early, “The investment being made by MDOT in the infrastructure of this portion of I-496 will provide a great benefit to the public for decades to come. “All of this is extremely rewarding, and will be a tremendous benefit for the motoring public and the project stakeholders.”  CEG

Page 74 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX PARIS CONTRACTING CO INC ....................................................18

KOBELCO CONSTRUCTION MACHINERY ......................................30,31

ALLIED CONSTRUCTION PRODUCTS ..................................................45

KOMATSU AMERICA CORP ..............................................................36,37

AMERICAN STATE EQUIPMENT ..............................................................7

KPI-JCI ......................................................................................................48

AMULET ..............................................................................................56,58

KUBOTA EXCAVATOR..............................................................................35

ASCENDUM MACHINERY INC ................................................................11

MAGELLAN CONSTRUCTION ................................................................25

BANDIT INDUSTRIES INC ..................................................................52,53

MCCANN INDUSTRIES INC ......................................................................6

BANE-WELKER ........................................................................................26

METSO MINERAL CRUSHING ................................................................43

BARGAINS ..........................................................................................66,67

METSO MINERALS SCREENING............................................................51

BROOKS TRACTOR ................................................................................21

MID COUNTRY MACHINERY ..................................................................27

CEG SCALE MODELS ............................................................................22

MUSTANG MFG........................................................................................34

CONSTRUCTION EQUIPMENT GUIDE ..................................24,40,68,71 CSTK JCB ................................................................................................17 CUSTOM MADE PRODUCTS ..................................................................28 DOOSAN PORTABLE POWER ................................................................38 ERB EQUIPMENT COMPANY..................................................................15 ESCO CORP ............................................................................................57 FABICK CAT................................................................................................2 FAE USA INC ............................................................................................49 FARM-RITE EQUIPMENT INC ................................................................10 FELLING TRAILERS............................................................................64,65 FINKBINER EQUIPMENT CO ....................................................................7 FLANGE LOCK ........................................................................................26 FOLEY EQUIPMENT CO............................................................................9 GARY CARLSON EQUIPMENT ..............................................................16 GROVE WORLDWIDE ............................................................................75 HINIKER....................................................................................................34

NORAM ................................................................................................28,29 POWERSCREEN MW DEALER GROUP ................................................42 RACKERS EQUIPMENT CO ....................................................................45 ROAD BUILDERS MACHINERY ..............................................................19 ROCK TOUGH QUALITY SCREENING ..................................................49 ROCKWATER CONSTRUCTION EQUIPMENT ......................................58 ROLAND MACHINERY INC........................................................................5 SANY AMERICA INC ................................................................................28 SCREEN MACHINE INDUSTRIES ..........................................................47 SMITHCO..................................................................................................63 STAR EQUIPMENT LTD ..........................................................................26 STEFFES GROUP INC ............................................................................73 TEREX FUCHS ........................................................................................54 THE VICTOR L PHILLIPS CO ..................................................................17 TOWMASTER INC. ..................................................................................61

HITACHI CONSTRUCTION MACHINERY ..............................................33 HOWELL TRACTOR & EQUIPMENT CO ................................................76

OHIO STATE SUPPLEMENT

ILLINOIS TRUCK & EQUIPMENT ..............................................................3

BOBCAT ENTERPRISES ..........................................................................3

IRAY AUCTIONS INC................................................................................73

COLUMBUS EQUIPMENT CO ..................................................................8

JEFF BELZER ..........................................................................................60

COMPANY WRENCH ................................................................................5

JJ SCHECKEL CORP ..............................................................................13

EQUIPMENT CORP OF AMERICA ............................................................3

JOHN DEERE ..........................................................................................39

GORILLA HAMMERS ................................................................................1

KIRBY-SMITH MACHINERY INC..............................................................23

JCB OF OHIO ............................................................................................6

KLEEMANN ..............................................................................................44

THE MCLEAN CO ......................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 25, 2020 • Page 75

Kirby-Smith Machinery Inc. www.kirby-smith.com 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 4617 Powell Street McAlester, OK 74501 918/310-1550 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300

Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net

Reliability y, value and industry-leading pe erformance are yours with our co omplete por tfo olio of mobile telescopic cranes.

Grove product offerring: All-terrain

50 t (55 USt)

Rough terrain Rough-terrain

25 t (28 USt)

Truck-mounted

50 t (55 USt)

Telescoping crawler

25 t (28 USt)

Industrial

5t (5 USt)

100 t 150 t 180 t 200 t 250 0t 60 t 80 t (65 65 USt) (100 USt) (115 USt) (175 USt) (210 USt) (240 USt) (300 USt)

30 t 35 t 45 t (3 30 USt) (40 USt) (50 USt)

60 t 65 t (65 USt) (70 USt)

90 t (100 USt)

70 t (80 USt)

55 t (60 USt)

30 t (30 USt)

80 t (80 USt)

300 t (350 USt)

45 t (50 USt)

7,7 t 8,1 t (8.5 USt) (9 USt)

50 t (55 USt)

9,5 t (10.5 USt)

400 t (450 USt)

450 t (500 USt)

120 t 135 t (130 USt) (150 USt)

100 t (115 USt)

70 t (80 USt)

13,6 t (15 USt)

120 t (130 USt)

18 t (20 USt)

22 t (25 USt)

460 t (507 USt)

140 t (154 USt)

110 t (121 USt)

125 t (138 USt)

25 t (28 USt)

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757

www.manitowoc.com

Page 76 • July 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WE HAVE HAVE A AN EX EXTENSI TENSIVE VE SELECTION OF WHEEL WHEEL LOADERS LOADERS AND EX EXC XCAVA VATORS TORS FOR SALE FOR E AND RENT

GARY Y,, IN

800.852.8816

PE ERU, IL

81 15.224.3003

www.h w.howell welltractorr..com

24/7 parts and service