CAT MH3026 OFFERS HIGHER PERFORMANCE, LOWER COSTS

New front linkage offerings provide up to 42 ft. 8 in. reach allowing operators to move more material without repositioning the machine. The MH3026 also offers up to 20 percent greater swing torque to move more material faster. Large tempered glass windows with small pillars on the reengineered cab design enhance all-around visibility and operating safety. Standard right-side and rearview cameras, upgradable to 360-degree vision, display video feed on the large in-cab touchscreen monitor to further enhance work area visibility.

Purpose built for reliable and efficient operation in waste and scrap metal applications, the new Cat MH3026 material handler design provides enhanced performance, low operating costs and improved operator efficiency.

The advanced electrohydraulic system optimizes the balance of power and efficiency, improving cycle times to handle more material in the same amount of time, improving profit potential, according to the manufacturer.

These Next Generation material handlers are powered by the Cat C7.1 engine, capable of operating on up to B20 biodiesel. Meeting U.S. EPA Tier IV Final emission standards, the engine’s maintenance-free aftertreatment system lowers operating costs and maximizes machine uptime.

The choice between power and economy modes fine-tunes power requirements to the task at hand, offering up to 10 percent lower fuel usage than previous models without sacrificing machine performance.

New front linkage offerings provide up to 42 ft. 8 in. reach allowing operators to move more material without repositioning the machine. The MH3026 also offers up to 20 percent greater swing torque to move more material faster.

Heavy lift mode boosts lifting capacities to more efficiently handle heavy loads. Allowing the boom to freely travel up and down without using pump flow, the standard SmartBoom allows the operator to focus on grapple control and have a smoother, more fuel efficient, cycle.

A range of attachments and new reach options are available for varied applications to increase operating flexibility. Technology

Now standard technologies on the Cat MH3026 material handler elevate operating protection. E-fence prevents the machine from moving outside operator defined parameters while Cab Avoidance helps the operator by preventing contact between the attachment and cab. By requiring a PIN code to start the engine, the new Operator ID inhibits the machine from unauthorized operation.

Designed for Safe Operation

Large tempered glass windows with small pillars on the reengineered cab design enhance all-around visibility and operating safety. Standard right-side and rearview cameras, upgradable to 360-degree vision, display video feed on the large in-cab touchscreen monitor to further enhance work area visibility. Thicker, high-impact and impactresistant windshields and roof windows meet EN356, P8B and P5A standards.

A ground-level shutoff switch stops all fuel to the engine and shuts down the machine. Preventing reverse oil flow in the event of an unexpected loss of hydraulic pressure, standard boom and stick lowering check valves keep the front linkage securely in place.

All daily maintenance points are quickly accessed from ground level, while a new service platform with steps provides easy, safe and quick access to the upper service area.

Reimagined Comfort

Offering a choice between deluxe and premium designs, the new Next Generation cab features a joystick steering option, eliminating the steering column to improve forward visibility, legroom and ease of cab entry. Further facilitating cab entry and exit, the left-hand console tilts up. All controls are conveniently positioned in front of and within easy reach of the operator to avoid unnecessary movements.

A larger, 10-in. high-resolution touchscreen monitor with jog-dial offers easy navigation of the intuitive operator controls. Different machine operators can store their specific joystick and preferred power mode settings, and the machine automatically recalls the settings based on the Operator ID.

The MH3026 offers a maximum cab height of 18 ft. 10-in. to improve loading and material handling visibility.

Superior Serviceability

Standard Product Link captures critical operating data such as location, hours, fuel usage, productivity, idle time, maintenance alerts and fault codes, which can be remotely accessed and tracked to boost fleet management efficiency.

Lasting 50 percent longer than previous designs, the new hydraulic oil filter improves filtration and increases change intervals to 3,000 operating hours. New antidrain valves keep the hydraulic oil clean during filter replacement. All engine filters feature a coordinated 1,000-operating-hour change interval, and the new air intake filter with precleaner lasts up to 1,000 hours to reduce maintenance requirements.

Operators conveniently track filter life and maintenance intervals on the in-cab high-resolution monitor. Eliminating the need for operator interaction, the high-efficiency cooling fan features a standard automatic reverse function to keep the cores clean, maximizing machine uptime. An optional vibrating cooling screen activates during reverse fan operation to further improve dust and debris removal.

For more information, visit www.cat.com.

m www.aisequip.com

3 A3600 N Grand River Av ve L i MI Lansing, MI 90684 175 7-321-8000

Grand Rapids 600 44th Street SW 9MI 4Grand Rapids, 4995548 5616-53 -2 2400

Leno 507-2776-

Northeast Detroit t A65809 Gratio Av venue oxx, MI 48050 58 -7727--77502 2 0046

Sa Bridgepo 989 Di AIS 777

aginaw

Drive 7ort, MI 487222 7 0090 56

989-

T Tr rav 8300 Williamsb 1-23 -2 2

W We es 565 5555 P New Hud 248-437 800 57-4

6 16

-7 7--0090 verse City 7-M-7722 East 964burg, MI 496990 7 677-5060 t Detroit ontiac Trail dson, MI 48 65 5 - 7-8121 457--8121

ywww.butlermachiner .com

WtSthS3402 36th St S Fargo, ND 58014 1-70 -2280-3100 7476-00-78 -772 2 -7744775 5

Miriam A3630 Av ve Bismarck, ND 58501 7 70 01-223-0890

2803 I-94 Business Loop E Dickinson, ND 58601 17 70 0 -4 4556-1400

1201 S 46th St G d F k ND 58201 Grand Forks, ND 58201 17 70 0 577-775-4 42 238 H1505 w Minot 701-8 94 499550 E Aberde 060553601 Dea Rapid C 60520571 Tru Pierre 5-0605-2 2 3201 N Sioux Fa B E

34

op A , SD 57 A

City 0

y 2, ypass E , ND 58701 58522-3508 yHighway 12 en, SD 5774 401 5-6-222 62 240 Adwood Av ve N y, , SD 57702 2 42 2-4850 uck St Av ve e 75501 24-5400 Louise Av ve 0alls SD 57107 7Sioux Faalls, SD 571 605-336-3010

www.centralsands.co om

4219 E 50th St • Des Moines, IAA 50317 -700- 48 -2 2477--2 2400 • 515-964-8 8600

www.rbscott.com

1011 Short St • Eau Claire, W 715-832-9792 I 54W 47 701

www.roadbuildersmachine yr .com

94

1001 S 7th St Kansas City, KS -37913 71 1-3822 0 4115 S 90th St

Omaha, NE 402-331-9 92 200 5601 Fle Linc 4022-3 44994499 Ju Grand 308-3 1303 S Chestnut St Norfolk, NE 402-316-4640 her Aetc Av ve coln, NE 5-0442 25 47 7 uergen Rd Island, NE 6384--2 262 20