Issuu

Published Nationally

$3.00

Midwest Edition

May 30 2020 Vol. XXV • No. 11

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Midwest’s ‘500-Year-Flood’ Causes Damage By Lori Tobias CEG CORRESPONDENT

Dakota AG’s ‘Power of Foam’ Cleans, Degreases, Disinfects...10

SHIELDS Customization Leads to Expansion...14

Michigan Department of Transportation photo

The floods damaged dozens of bridges, caused the failure of two privately owned dams and closed roads, as well as impacted infrastructure throughout Midland County. Revolver Solves Blaine, Minn., Street Sweeping Dilemma...23

Only hours after parts of Michigan experienced what is described as a 500-year flood, Michigan Department of Transportation (MDOT) engineers were preparing emergency inspection and repair contracts. The floods damaged dozens of bridges, caused the failure of two privately owned dams and closed roads, as well as impacting infrastructure throughout Midland County. “This is unlike anything we’ve seen in Midland County,” said Gov. Gretchen Whitmer, declaring a state of emergency. More than a quarter of the county’s population, approximately 11,000 people, were evacuated as worried officials waited and watched the failing dams. Midland City Manager Brad Kaye also issued a declaration of emergency. The Tittabawassee River crested at 35.05 ft. on May 20, about 5 ft. higher than the flood waters in the 1986 flood, which was classified as a 100-year flood and had been the highest on record. see FLOOD page 52

Table of Contents ..............4

N. D. Spends $1B on Mouse River Project

Recycling Section .......23-36

By Brenda Ruggiero

Attachments Section ............ .................................... 47-51 Truck & Trailer Section ........ ....................................58-63 Auction Section ..........66-75 Business Calendar ............70 Advertisers Index ............74

CEG CORRESPONDENT

The Mouse River Enhanced Flood Protection Project (MREFPP) is a continuing project in North Dakota that is designed to reduce the risk of future flooding throughout the entire Mouse River Basin. The Mouse River, or the Souris River in Canada, originates in southeast Saskatchewan and travels 357 mi. through North Dakota. It enters the state near Sherwood, flows through Minot, to Velva and then

travels north into Manitoba. The Mouse River basin drains nearly 23,600 sq. mi. and has a long history of flooding. Some of the largest floods on record occurred in 1969, 1976 and 2011, the biggest flood event in recorded history. The project began in 2011. It was originally initiated by the North Dakota State Water Commission (NDSWC) in response to a request for assistance from the Souris River Joint Board (SRJB) following the Mouse River flood of June 2011. see RIVER page 46

Phase BU-1A of North Dakota’s Mouse River Project includes the replacement bridges to increase conveyance through the area.

Page 2 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2004 Cat D10R / $475,000

2014 Cat 12M2 AWD / $135,000

2017 Cat M320F / $289,500

SN: AKT00618 Hours: 10,643

SN: R9P00171 Hours: 8,463

SN: FB200394 Hours: 72

2012 Cat D8T / $399,000

2014 Cat 980K / $220,000

2016 McCloskey I44R / $445,000

SN: MLN00696 Hours: 4,469

SN: W7K02169 Hours: 8,617

SN: MC85735 Hours: 1,163

2015 Cat 420F2/ $75,000

2017 Cat 299D2 / $69,500

2015 Cat 259D / $44,000

SN: HWC00600 Hours: 998

SN: FD201818 Hours: 1,666

SN: FTL03233 Hours: 1,090

636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 3

2018 Broce RCT350 Sweeper ... $32,500 $ & KHDW +3 VSHHG K\GURVWDWLF ¶ EUXVK JDOORQ ZDWHU VSUD\ V\VWHP +\GUDXOLFV EUDFNHWV I R U V F U D S H U E O D G H U R D G O L J K W V E H D F R Q P L U U R U V VFUDSHU EODGH DW DGGLWLRQDO FRVW KUV 1

2016 Deere 544K Wheel Loader .. $129,500

2016 New Holland C238 Skid Steer .. $40,000

$ & +3 7 I GLHVHO -5% T WDFK EXFNHW MR\VWLFN FRQWURO ) 5 WKXPE VZLWFK ULGH FRQWURO 5 W L U H V O L P L W H G V O L S G L ႇ U H D U G L ႇ O R F N F R O G Z H D W K H U SDFNDJH OEV KUV

$ & UDGLR +3 KDQG FRQWUROV ,62 SDWWHUQ FKDQJHU VSHHG OE RSHUDWLQJ FDS K\GU PRXQW SODWH ULGH FRQWURO VHOI OHYHO WXUQ VLJQDOV PXOWL IXQFWLRQ HOHFWULFDO OEV (PLVVLRQV :DUUDQW\ KUV 1

2016 JLG 1055 Forklift ........ $104,500

2016 Deere 670G Motor Grader .. $139,500

2012 Cat 420EIT Loader Backhoe. oe. $42,500

2015 Cat 420F2 Loader oader Backhoe .. $72,500

+HDW +3 7 I :' ¶ UHDFK IURQW VWDELOL]HUV VROLG WLUHV PRGH VWHHULQJ DX[LOLDU\ K\GUDXOLFV URDG OLJKWV ZRUN OLJKWV EHDFRQ IHQGHUV OEV KUV 67 $

Rear Ripper /R 3UR &DE KHDW DQG $ & +3 7 L YDULDEOH KRUVHSRZHU :' ¶ PROGERDUG SRZHUVKLIW K\GUDXOLF VLGHVKLIW SXVK EORFN DLU ULGH VHDW 5 WLUHV GLႇ ORFN KUV

+3 :' VKXႉH VKLIW WUDQV H[WHQGD KRH ¶ ´ GLJ GHSWK \UG EXFNHW IURQW K\GU FRXSOHU IURQW DX[ K\GU IURQW HOHFWULF KRRNXS ÀLS RYHU DXWR XS VWDELOL]HUV ´ UHDU EXFNHW OEV KUV

$ & +3 7LHU GLHVHO :' DXWR VKLIW WUDQV H[WHQGD KRH ¶ ´ GLJ GHSWK \G IURQW EXFNHW ÀLS RYHU VWDELOL]HUV Z JXDUGV DXWR XS VWDELOL]HUV DX[ UHDU K\G K\GUDXOLF WKXPE ´ UHDU EXFNHW FROG ZHDWKHU SNJ KUV

2015 Kobelco SK140SRL LC-3 .... $92,500

‘14 Hydrema 9 912ES w/ High Rail Gear. $119,500

2007 Cat D8T w/Winch Dozer . $185,000

‘16 Atlas XAS 185 KD7 Compressor . $12,500

$ & +3 GLHVHO +LJK 5DLO *HDU PXOWL WLS URWDWLQJ ER[ XS WR GHJUHHV OHIW ULJKW WRQ FDSDFLW\ DXWR WUDQV :' DXWR ERG\ UHWXUQ WR FHQWHU SRVLWLRQ GLႇ ORFN KHDWHG VHDW UHDU YLHZ FDPHUD KUV

A/C, 347HP diesel, 28” pads, SU blade e or 16’ angle EODGH GLႇ VWHHU $52 UHDG\ ULSSHU YDOYH UHDU ULSSHU RU ZLQFK DYDLODEOH DW DGGLWLRQDO FRVW OEV KUV

.XERWD 9 &5 () +3 7LHU ) GLHVHO & ) 0 S V L ' W L U H V S L Q W O H K R R N O E V V D QG EO DVW SRW DW DGGL W LRQDO F RV W KUV 1

$ & +3 7LHU GLHVHO ,1'5 ´ SDGV ¶ ´ VWLFN ¶ ´ GLJ GHSWK DGGLWLRQDO FRXQWHUZHLJKW SDWWHUQ FRQWURO KDQG FRQWURO ZD\ DX[ K\GUDXOLFV WRS ZRUN OLJKWV OEV KUV .2%

‘14 Kobelco SK350LC Exc cavator. $147,500

‘18 Kobelco SK85CS-3E S Excavator . $64,500

‘18 Kobelco SK85CS-3E Excavator or . $67,500

2012 Cat M322D Wheeled eeled Excavator... $154,500

$ & +3 7LHU GLHVHO ,1'5 ´ UXEEHU SDGV ¶ ´ VWLFN ¶ ´ GLJ GHSWK DGGLWLRQDO FRXQWHUZHLJKW KDQG FRQWURO ZD\ DX[ K\GUDXOLFV OEV KUV .2%

$ & +3 ,1'5 UXEEHU WUDFNV ¶ VWLFN ¶ ´ GLJ GHSWK ¶ SXVKEODGH VZLQJ ERRP ZD\ K\GUDXOLFV PHFKDQLFDO TXLFN FRXSOHU SDWWWWHUQ FRQWURO DGGLWLRQDO FRXQWHUZ ZHLJKW OEV :DUUDQW\ KU RU KUV .2%

$ & +3 ,1'5 UXEEHU WUDFNV ¶ VWLFN ¶ ´ GLJ GHSWK ¶ SXVKEODGH VZLQJ ERRP ZD\ DX[ K\GUDXOLFV K\GUDXOLF TXLFN FRXSOHU SDWWHUQ FRQWURO DGGLWLRQDO FRXQWHUZHLJKW OEV :DUUDQW\ KUV RU KUV .2%

$ & +3 GLHVHO ¶ ´ VWLFN ¶ ´ GLJ GSWK DX[LOLDU\ K\GUDXOLFV RXWULJJHUV DQWL GULIW YDOYHV URDGLQJ SNJ &DW YDULDEOH SLQ JUDE K\G FRXSOHU ´ GLWFKLQJ EXFNHW ZLQGRZ JXDUG OEV KUV

sales@iltru uck.com • renta al@iltruck.com • 815-941-1900 Illinois Truck & Equipment 320 0 Briscoe Drive, Morris Illinois 6045 50

www.iltruck.com

Page 4 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

MIDWEST EDITION

DAKOTA AG’S ‘POWER OF FOAM’ CLEANS, DEGREASES, DISINFECTS

The Power of Foam is a complete foam cleaning system compatible with EPA-approved disinfectants to combat the transmission of COVID-19. The Power of Foam is a product of Dakota AG Innovations available through JLG.

SHIELDS CUSTOMIZATION CAPABILITIES LEAD TO EXPANSION

Form/Tec Plastics, mother company of SHIELDS Windshields, manufacturer of SHIELDS polycarbonate heavy equipment replacement windshields, announces the expansion of its line of excavator replacement windows and doors.

KOMATSU BECOMES FEEDING AMERICA NATIONAL PARTNER

Komatsu’s North American business units are partnering with Feeding America, the nation’s largest domestic hunger-relief organization, to donate up to $250,000 to support the organization’s work.

ROCK MACHINERY OPENS NEW, LARGER FACILITY IN ALLENTON, WIS.

Located at 7675 Pamperin Way, the 15,000 sq. ft. building sits on 10 acres. with a new office, service bay, 8,000 sq. ft. warehouse and a new repair facility featuring a 50,000-lb. capacity crane to better serve its customers.

EATON RESA GAINS AED FOUNDATION HIGH SCHOOL RECOGNITION

The AED Foundation (AEDF) announced the recognition of the Heavy Equipment Technology Program at Eaton Regional Education Service Agency (RESA) located in Charlotte, Mich.

75TH ANNUAL GREAT LAKES LOGGING, EQUIPMENT EXPO SET FOR SEPT.

The 75th Annual Great Lakes Logging and Heavy Equipment Expo is set for Sept. 10 to 12, 2020. The event is co-sponsored by the Great Lakes Timber Professionals Association (GLTPA) and Fabick CAT.

CRANES PICK, HOLD ON CONVEYOR BRIDGE DEMOLITION IN CHICAGO

To upgrade the processing line at a Chicago-area metals-handling plant, a truss bridge supporting a conveyor needed to be removed. The conveyor feeds a kiln where material is heated to remove impurities. Founder, Publisher & CEO Midwest Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Joseph S. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

In Litchfield, Minn., a hospital was facing a shortage of supplies due to the influx of COVID-19 patients. Towmaster heard their call and without hesitation agreed to pivot some of its operations to manufacture IV stands.

MACK TRUCKS PARTS AVAILABILITY REMAINS STRONG

As the trucking industry rises to meet the critical needs of society during the unprecedented COVID-19 situation, Mack Trucks continues to support its customers and dealers with strong parts availability.

ILLINOIS TO ‘FAST TRACK’ $25M IN INFRASTRUCTURE GRANTS

Illinois launched the $25 million Fast-Track Public Infrastructure Grants initiative on May 12 to accelerate work on planned public infrastructure projects around the state this summer.

STEVENSON CRANE SERVICE EARNS INTERNATIONAL AWARDS

Illinois-based Stevenson Crane Service Inc. recently earned two international awards for crane and rigging safety based on performance numbers that greatly exceeded industry standards.

RECYCLING SECTION

23 24

30 34

METSO IMPROVES PERFORMANCE WITH NORDBERG HP900 CONE CRUSHER

RUBBLE MASTER CELEBRATES 20 YEARS OF MOBILE CRUSHING IN U.S. ALLU TRANSFORMS CONSTRUCTION WASTE INTO VALUABLE MATERIALS

DEPARTMENTS

66 70

COMING AUCTIONS

GRADALL XL 5330 V TrackStar Railway Maintenance Machine

BOBCAT Small Artic Loader Bucket

BUSINESS CALENDAR

EQUIPMENT

47 48

REVOLVER SOLVES BLAINE, MINN., STREET SWEEPING DILEMMA

DOOSAN MATERIAL HANDLER PREPS FOR NORTH AMERICAN LAUNCH

51 60 62

FECON Blackhawk Mulcher

BLADECORE NiCore Premium Shear Blade Series CATERPILLAR Pin Grabber Coupler

KENWORTH T880S Fixed Grille Option

FELLING IT-I Tilt Removable Attachment Rack.

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

• National Sales Manager

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

TOWMASTER PIVOTS TO CREATE EQUIPMENT FOR LOCAL HOSPITAL

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

YouTube

773/769-4090 312/953-0375 jmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2020, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 5

V I S I T

Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers

$84,500

2014 WIRTGEN W150I

$249,500

2015 KOMATSU PC490LC-11 $279,500

2015 WIRTGEN W220

$CALL

2007 WIRTGEN WR2400

$239,500

2016 KOMATSU D39PX-24

2016 KOMATSU D155AX-8

$379,500

2017 KOMATSU WA270-8

2013 KOMATSU D51PX-22

STK# KM18411, 6,528 HRS, DEPERE, WI

STK# KM17372, 3,796 HRS, BOLINGBROOK, IL

STK# WG19036, 3,076 HRS, SPRINGFIELD, IL

STK# KM16370, 2,860 HRS, FRANKSVILLE, WI

2014 KOMATSU PC390LC-10 $189,500

2016 KOMATSU D65PXI-18

2017 KOMATSU WA380-8

$219,500

2018 KOMATSU PC210LC-11 $179,500

$119,500

2018 KOMATSU D65PXI-18

$329,500

2014 KOMATSU 931.1

$349,000

$144,500

2016 KOMATSU PC228USLC-10 $144,500

2017 KOMATSU WA320-8

$159,500

STK# WG20004, 3,274 HRS, SPRIINGFIELD, IL

STK# WG19010, 3,964 HRS, SPRINGFIELD, IL

STK# KM19557, 943 HRS, PALMYRA, MO

STK# KM18364, 828 HOURS, PORTAGE, IN

STK# KM19270, 4,994 HRS, EAST PEORIA, IL

STK# KM19470, 957 HRS, BRIDGETON, MO

STK# KM19206, 1,292 HRS, COLUMBIA, MO

STK# KM19406, 2,252 HRS, BOLINGBROOK, IL

SKT# KM20049, 692 HRS, DEFOREST, WI

STK# VT18004, 5,756 HRS, ESCANABA, MI

STK# KM19425, 786 HRS, CAPE GIRARDEAU, MO

17 Roland Branch Locations in IL, IN, MI, MO, and WI

Used Sales (217) 789-7711

$199,500

STK# KM19702, 4,096 HRS, PALMYRA, MO

R O L A N D M A C H I N E R Y . C O M

Page 6 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com

View our complete Used & “Like New” inventory at McCannOnline.com

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110

2019 Case 621G loaders available. Low hours, warranty, Financing, available. Call today for detail

Case 2019's 100-225 hours Your choice $36,490

McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana Merrillville 219-576-7800 Mishawaka* 574-406-6800

2017 Takeuchi TL12, s/n 412100463, 1400 Hours, Cab w/AC , Hyd Coupler, Pattern Changer, New Tracks, 84” Tooth Bucket........ ........................................................$52,500

2018 Takeuchi TL10, s/n 410002044, 365 2017 Takeuchi TL12, s/n 412100496,2200 Hours, Cab with Heat and Ac, Two Speed Hours, Cab w/AC, Hyd Coupler, Pattern ,Hyd Coupler ,72" Smooth Bucket....$55,900 Changer, New Tracks, 84" Tooth Bucket ........ ........................................................$50,500

2012 Takeuchi TL250, s/n 225001751, 3190 Hours, Cab with Heat and AC, Case Controls, Hyd Coupler, New Tracks, 80" Tooth Bucket ....................................$34,000

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

Schereville* 219-865-6545

Michigan Marne* 616-371-7250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 7

KPI FT4250CC - ‘14, approx 2000 hrs. 3 bar, Roadtec RP190 - ‘13, approx.. 6200 hrs. EZIV 18’ feeder, xtra cross over conv, magnet, Carlson screed, Moba grade & slope controls .. Moblestar ..........................................$557,000 ............................................................$58,900

GRADALL XL4100 IV - ’15 w/4850 hrs, #C001984 ........................................$195,000

PAVERS / ROAD WIDENERS BOMAG CR662RM - ‘15, 373 Hrs, Material Transfer w/Hopper, #C000763 ............$435,950 Midland SPD-6 - ‘18, 300 Hrs, wash down, hyd variable strike off, #C001485..............$109,900 Midland SPD-8 - ‘19 w/50 Hrs, hyd. Variable strike-off, #C001697 ..........................$179,800 Midland SPR-6 - ‘18 w/360 Hrs, wash down, hyd. Variable strike-off, #C001737 ......$112,450 P.O.R. items may be on rent causing pricing and hours to vary.

EXCAVATORS

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

Grove RT880E – (’14), 80 Ton, 128’ Boom, 56’ Jib, 3,426 hrs, C001236…$469,000

Roadtec RP190E – (’17), 230 HP Rubber Tired Paver, 10’-19’6” Carlson Easy Screed, C002930...$P.O.R.

Liebherr L556 – (’11), 188 HP, 23.5R25EM tires, RC, QC, 4.58 YD bkt, #15360…POR

Manitowoc 10000B-1 – (’13), 75 Ton, 190’ Boom, 60’ Jib, C002371...$749,000

Large Selection of New & Used Equipment in Stock.

MILLING MACHINES BOMAG BM600 - ‘16, 182 Hrs, 24” Drum, Load Out Conveyor......................................$184,000 BOMAG BM1200/35 - ‘15, 600 Hrs, 4’ Drum, 3’ Also Available, Front Conveyor, #C000846 ........ ..........................................................$292,852 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900

AGGREGATE EQUIPMENT ASTEC GT205S, (’17), Triple Deck Crawler Mounted Screen Plant. #C003398............................................$CALL EXTEC S5, (’08), Double Screen Crawler Screening Plant, (2) 8’x5’ double deck vib screens, (2) hyd folding wing conveyors, #C002706 ..............................................................................................................................$95,000 JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000 KPI FT4250CC, (‘11) Track Mounted Impact Crusher, #C003741 ................................................................$CALL SANDVIK CH430, (‘13) Closed Circuit Cone Plant, 6’x20’ TD Screen, #40230 ......................................$493,000 KPI GT36X80, (‘16) Track Mounted Stacker, #C002294 ..............................................................................$CALL

CRUSHING AND SCREENING ASTEC GT104 - ‘17, 71 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154 ............ ..............................................................$P.O.R. ASTEC GT165 - ‘17, 390 Hrs, 5’x16’ Top Deck, 5’x15’ Bottom Deck, 10.5 Cyd Hopper, #C001250 ................................................P.O.R.

Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. ROLLERS Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ................$P.O.R. Sakai GW750-2 - ‘14, 691 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ......*$99,950 Gradall XL4100 III - ‘08, approx. 9000 Hrs, New clutch, runs well ..........................$56,900 Sakai SW770HF - ‘17, w/930 Hrs, #C001144.... ............................................................$84,900 BROOMS Sakai SW770HF - ‘17, 450 Hrs, 67” high frequency, #C001168............................$96,000 Roadtec FB100 - ‘16, approx.. 50 hrs. Front mount, side-shift, A/C ............................$P.O.R. *Comes with any remaining standard and Superior DT80K - ‘18, approx.. 400 hrs. Midmount, tier III Kubota ..........................$39,900 3 year extended power train warranty.

Contact Chuck or Jason in Illinois

1-800-307-0221

crhodes@finkbiner.com jzeibert@finkbiner.com

www.finkbiner.com

CRANES GROVE RT635, (’98) 35 Ton Capacity, 105’ Boom, 29’ Jib, SN82072 ....................................................$49,000 GROVE RT650E, (’14) 50 Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$369,000 GROVE RT765E-2, (’14), 65 Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ........................................$389,000 GROVE RT880E, (’13), 80 Ton, 128’ Boom, 56’ Jib, Aux Winch, #C000782 ........................................$459,000 GROVE TMS900E, (’05), 90 Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ......................................$279,000 KOBELCO CK1000, (’01), 100 Ton, 190’ Boom, 60’ Jib, Aux Winch, #C003428 ..................................$219,000 LIEBHERR HS855HD, 100 Ton Duty Cycle Crane, 105’ Boom, (2) Hoist with 20,000 SLP ..................$850,000 MANITOWOC 12000, (‘07) De-Rated 100 Ton, 200’ Boom, 60’ Jib, 3rd Drum, #C002372 ..................$279,000

LOADERS AND EXCAVATORS: LIEBHERR A902 SPEEDER, (‘98) 10 x 20 Tires, 4 Outriggers, Aux Hyd, #C001293..................................$CALL LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R954CHD, Super Long Reach Excavator - 42'8" Boom, 32'10" Stick. 70' reach @ Ground Level, #C028565 ....................................................................................................................................................$POR LIEBHERR R946LC, (’14), Long Reach, 60’ Reach at Grade, 2.15 yd bkt. #C000938 ................................$POR

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Park Allison at:

pallison@amstate.com or mobile 1-414-355-1074 or 1-800-236-6900 Visit us at: www.amstate.com

Page 8 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2015 Bobcat S595 - Call for Details

Bobcat Excavators in Stock, Call for Pricing

Bobcat Toolcats In Stock

Doosan DX140LC Excavator Available for Rent

Largest Selection in the Midwest! ®

Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000

Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500

Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000

2015 Bobcat T770 - Call for Details

Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Authorized Bobcat Dealer

U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

Page 10 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

This Bobcat is ready for cleaning.

The Power of Foam cleaning system is used to degrease and sanitize.

The result is a clean machine, ready to go to work on its next project.

Dakota AG’s ‘Power of Foam’ Cleans, Degreases, Disinfects The Power of Foam is a complete foam washing time. Dakota Wash HD is “safe to cleaning system compatible with EPA- use on most surfaces, including engine and approved disinfectants to combat the trans- battery compartments and its electronic mission of COVID-19. The Power of Foam components, yet powerful and effective is a product of Dakota AG Innovations avail- enough to neutralize harsh and toxic chemiable through JLG and proven by United cals.” It is user-friendly and compatible with Rentals. According to the company, “keep- EPA-approved disinfectants and sanitizers, ing a fleet clean, degreased and sanitary is more important than ever and the Power of Foam simplifies that process, just foam it on and rinse it off.” “This is the best way we found to help protect our rental customers and staff from COVID19,” said Chris Risnes, service manager of United Rentals, as he explained how the company is doing its part to slow the transmission of COVID-19. His location is one that is supplementing EPA-approved Shockwave disinfectant with the Power of Foam cleaning system on its rental fleet. One gallon of Shockwave concentrate combined with five gallons of Dakota Wash HD concentrate is blended with water inside the included mixing drum. This solution creates an all-in-one cleaner, degreaser and disinfectant. Dakota Wash HD, part of the Power of Foam product line, is a heavy-duty cleaner and degreaser that uses foam to clean, break down and encapsulate stubborn grease buildup while neutralizing the effects of chemicals and road The Power of Foam cleaning system is safe for salt. It will cut down on power including engines.

according to the company. The Dakota Wash HD is applied using the Power of Foam wall-mounted foaming unit and can be installed in the wash bay. There are no electrical components and the wallmounted unit is air-operated, feeds from a 55-gal. mixing drum positioned below the

most surfaces,

unit and includes a 70-ft. hose and foam applicator wand. The Power of Foam cleaning system is available through JLG (JLG part number 70011987). For more information, visit dakotaaginnovations.com/ur.  CEG

The Power of Foam is a product of Dakota AG Innovations available through JLG and proven by United Rentals.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 11

NORTH DAKOTA TA Williston 701.577.1249 Bismarck 701.250.4882 Fargo 701.271.2360 TENNESSEE Kno oxville xville 865.525.1845 Chattanooga 423 308 7940 423.308.7940 NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710 SOUTH CAROLINA Piedmont 864.704.1060 Columbia 803.791.0740 Charleston 843.414.1120 GEORGIA Buford 678.318.9500 Savannah 912.964.8079

R ady to Work. Re ork

Macon 478.200.3300

Work comfortab c bly day in and day out. Volvo V l h haulers l are engineere i ed d for f continuous ti production d ti to t reduce downtime and boosst your bottom line. No matter the terrrain, hauling is made more efficient with incredible fuel e efficiency, comfortable cabs and a long service life. Choose Volvo and lower your cost per ton. Lea arn more about what powerful, fuel efficient Volvo haulerss can c do for your operation. Contact your nearest Ascendum location today.

ascendummachinery.com ascendummachinery.c . om .c

Page 12 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sales • Rentals • Parts • Service • Financing ncing

2016 Komatsu D65PX-18 KM16294X $219,500 3,509 hrs.

2018 Komatsu K WA500-8 A500 8 A

2015 Wirtgen i n WR200XLI

KM18423X $369,500 9004 hrs.

WR150 004X $299,500 2,300 hrs.

2006 Komatsu D41E-6 D

2014 Komatsu u D39PX-23

3,90 04 hrs.

KM14199X $89,500 2,300 hrs.

2014 Caterpillar C erpillar illar D6T XW CT T14025X 2,600 hrs.

$219,750 50

2014 Komatsu PC36 60LC-10 KM M14056X 5,500 hrs.

$132,50 00

2013 Caterpillar 32 20E

2014 Deere 250G 2

2015 Komatsu su WA270-7 A

2016 Kom matsu WA470-8 A

CT13008X $102,750 6,288 hrs.

JD14001X $127,500 2,9900 hrs.

KM15410M $114,500 3,900 hrs.

KM M16433X $152,00 00 7,045 hrs.

2014 Kawasaki 80Z 7

2017 Deere 31 10LEP

2015 Caterpillar llar 120M2

2014 LeeBoy 8510C

KC14029X $59,500 12,046 hrs.

JD17010J $69,500 855 hrs.

CT1501 13X $169,500 576 hrs.

LB B14006X $79,500 00 2,217 hrs.

20 015 Komatsu PC C138USLC-10 KM15152X 3,610 hrs.

$109 9,500

2017 Deere 644k JD17003X 7,094 hrs.

$119 9,500

2015 K Komatsu HM400-5 KM15268M 6,500 hrs.

$459 9,500

All sales are subject to availability at time of order, prices do not in nclude taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. untries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Wo orth • Ka ansas City • Lubbock • McAlester • Odessa • Wa aco • Oklahoma City • St. Louis • Tulsa

Contact Terr e ry y Ly yness fo or details and a pricing. g. Follow us on

877 549 877.549 9 7501 9.750

www.kirby .kirby-smith.com smith.com th.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 13

JD 300D, 30 Ton, Bed Heater, Tailgate, #104338 ........$198,000

JD 544K, Coupler, Ride, JD 8335R, Cab, Air, JD 644K, Cab, Air, QC, JD 250GLC, 9’9” Arm, GP Bucket, #111470 .... Duals, #75708 .............. 3 Spool Aux, #108584 .. 28” Pads, #114044 ........ ........................$99,000 ......................$179,500 ......................$134,000 ......................$169,000

Cat 953C, Cab, Air, Gp Bucket, #116053 .......... ........................$49,000

Bomag BW211D-40, JD 850K, LGP, 30” Pads, JD 770G, Low Cab, 14’ JD 160GLC, 10’2 Arm, Cab, Heat, 84” Smooth 28” Pads, #108006........ 152” Semi U Blade, Blade, #102876 ............ ......................$109,500 Drum, #106096 $69,000 #115878..........$129,000 ........................$99,500

JD 350GLC, 13’1” Arm, 32” Pads, Aux Hyd, #107333 ........$159,000

NPK Hammers, All Sizes for All Makes. JD 550K, LGP, 24” Pads, JD 744K, Cab, Air, Inspected and Well Coupler, GP Bucket, 124” Blade, Warranty, Maintained, GH4 – #96606 ............$89,500 #111720..........$139,500 GH18

JD 672G, Low Cab 14’ Blade, #102755 ............ ......................$134,000

JD 624K, Cab, Air, 7yd JD 344K, Cab, Air, JD 750J, LGP. 156” JD 310SK, Cab, Air, Ext GP Bucket, #113151 ...... Ride, Hi Vis Coupler, PAT Blade, 34” Pads, Hoe, Aux Hyd, #106433 ........................$129,500 #103183 ..........$86,000 #110776............$77,750 ..........................$54,500

JD 844K, Cab, Air, Joystick, Ride, #110851 ......................$188,000

Page 14 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SHIELDS Customization Capabilities Lead to Expansion

Bill and Jacki Shields built on the overwhelming popularity and success of its motorcycle fairings to begin producing formed acrylic parts for a wide range of industries.

The SHIELDS team is ready to produce your customized replacement windshields and doors.

Form/Tec Plastics, mother company of transmittance while decreasing heat gain in SHIELDS Windshields, manufacturer of the summer and cab heat loss in the winter. SHIELDS polycarbonate heavy equipment • For the construction industry, downtime replacement windshields, recently is a major concern. The impact resistance of announced the expansion of its line of excaSHIELDS products means significantly less vator replacement windows and doors. maintenance intervals for replacing cracked According to company president Brad or broken windshields. Shields, the product expansion represents a • For the farmer who often runs equip300-percent increase in its excavator categoment on public roadways from one field to ry offerings. the next, SHIELDS replacement windExcavator replacement shields are now shields offer protection from roadside debris available for the current generation excavacaused by passing vehicles. tors as well as excavators produced in the Within the company’s construction equippast 10 to 12 years and includes replacements ment categories, SHIELDS offers ½-in. for all major manufacturers. Shields replacement windshields for harsh environexplained that a major impetus for the ment applications such as demolition and expanded line came about from conversarecycling/scrap yards, as well as 3/8-in. and tions the company had with attendees who ¼-in. thick replacement windshields for genvisited the SHIELDS Windshield’s exhibit at eral construction operations. ConExpo. Located south of Indianapolis in According to Shields, the company recentMartinsville, Ind., the company was founded ly moved to a more retail-oriented sales SHIELDS customization capabilities have always been at the forefront of being able in 1975 by William and Jacki Shields when focus. they introduced an acrylic Silhouette Fairing to meet its customers’ needs. SHIELDS customization capabilities have system for motorcycles. always been at the forefront of being able to meet its cusBased on the overwhelming popularity and success of its tomers’ needs. As Shields explained, when a specific windmotorcycle fairings, the company began producing formed shield was requested that wasn’t in the company’s product acrylic parts for a wide range of industries and eventually line, they’d create the tooling to produce it. Once the set up expanded to include vacuum forming of optically correct was in place, the product was then added to its list of offerpolycarbonate products. As the company’s expertise and ings. capabilities in forming polycarbonate grew, so too did its Recognizing the industry’s requirement for readily-availproduct line, including some very unique applications. able products, as well as steadily increasing demand, With products ranging from face shields to windshields SHIELDS has vastly ramped up its operations to produce a for recreational and construction vehicles, SHIELDS prodwide range of stocked replacement windshields. The ucts have been embraced by the professional race car circuit expanded line adds to the company’s extensive list of prodand its shields are used in marine and military applications ucts, which includes polycarbonate replacement windshields and even on monorails in Disney’s theme parks. for backhoes, dozers, skid steers, wheel loaders and farm The son of William and Jacki Shields, and current compaequipment. ny president and owner, Brad Shields, grew up in the busiAs Shields explains it, replacing glass windshields with ness, attending promotional events with his parents as a polycarbonate windshields provides several benefits for child. He has led the company through several major expanequipment owners: Excavator replacement shields are now available for sions and product introductions. • the company’s polycarbonate windshields are half the the current generation excavators as well as excavaThe family tradition has continued at Form/Tec weight, yet 250 times stronger than glass; SHIELDS with Brad’s wife, Karen Shields, joining the comtors produced in the past 10 to 12 years and includes • they reduce noise within the cab and offer greater light replacements for all major manufacturers. see SHIELDS page 68

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 15

#80639 2002 CAT 140H VHP, CAB | A/C | 14’ MOLDBOARD | 5,500 HOURS................$135,000

#92776 2014 TAKEUCHI TL12, CAB | A/C | HEAT | HIGH FLOW UNIT | 2,100 HOURS ........$50,500

#51021 2008 KOMATSU HM350-2, 26.5 R25 XADN MICHELIN TIRES | BODY HEAT | 8,300 HOURS ......................................CALL FOR PRICE

#82962 2014 KOMATSU HM400-3, CAB | TAILGATE | AUTO GREASER | 3,800 HOURS ........ ..................................................CALL FOR PRICE

#92483 2012 KOMATSU PC490 LC-10, CAB | A/C | AUX HYDS | JRB QC | 6,300 HOURS .......... ..............................................................$179,500

Page 16 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • • • • •

No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes

Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas:

Project Managers and Superintendents Project Sales Engineer Controls and Project Engineering Estimating Service and Project Sales Construction Manager

4 Tool Boxes Available

All Include Slugs and O'Rings.

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 Wayne, PA 19087

Call Today: 610-941-0100 Email: info@magellangroup.com

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

www.magellangroup.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 17

USE S D EQUIPMENT .com

TRUSTED MACHINES FROM A TRUSTED DEALER. R

2016 CATERPILLAR 262D, ID# SUC0237, SN DTB04430, 999 HOURS ............................................$29,900

2017 CATERPILLAR 305.5E, ID# 7CR6400, SN CR503934, 1022 HOURS..............................................47,910

2012 CATERPILLAR CS54B, ID# TUC0055, SN L4H00114, 4300 HOURS ..........................................$59,700

2015 CATERPILLAR 289D, ID# SUC0355, SN TAW02289, 2219 HOURS..........................................$35,800

2015 CATERPILLAR 950M, ID# RUC0220, SN EMB00683, 4842 HOURS ........................................$137,600

2011 CATERPILLAR 1402AWD, ID# TUC0027, SN M9J00444, 8330 HOURS ............................................$99,900

2014 CATERPILLAR D8T, ID# QUC0061, SN FCT01311, 5438 HOURS ........................................$366,200

2005 CATERPILLAR 613C, ID# SUR0005, SN 8LJ02797, 2365 HOURS ..........................................$188,100

2015 CATERPILLAR TL1255, ID# 4AR8246, SN DHW01396, 4332 HOURS........................................$72,700

2012 CASE SV300, ID# SGU0136, SN NCM445322, 2433 HOURS ................................................................$21,500

2015 CATERPILLAR 336FL, ID# SBU0134, SN RKB01189, 8009 HOURS ..........................................$79,900

2016 CATERPILLAR 299D2, ID# 6CR5996, SN FD201319, 3240 HOURS ..........................................$39,700

2013 CATERPILLAR D5K2, ID# SUC0367, SN KYY00676, 3450 HOURS ..........................................$78,200

2012 CATERPILLAR 12M2, ID# SUC0208, SN F9M00145, 5825 HOURS ..........................................$93,700

2008 CATERPILLAR 246D, ID# SUC0420, SN JAY01206, 1863 HOURS ............................................$16,900

2015 CATERPILLAR TL1055C, ID# 5AR8432, SN KDE01592, 4450 HOURS ..........................................$69,750

Page 18 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113

GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449

www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 19

2018 Case 580SN, 995 HRS, EQ0009659, Garden City, KS ....................................................$82,500

2019 Case TR270, 23.7 HRS, EQ0009453, Kansas City, MO ....................................................$48,900

2014 Case SR210, Mechanical H Pattern, 1,000 HRS, EQ0003198, Garden City, KS ..........$31,850

2014 Case 621F, Zbar, 1995 HRS, EQ0003141, Garden City, KS........................................$125,000

2006 Case 580M II Loader/Extendahoe, EQ0010281 in Garden City, KS. ................$29,500

2012 Case SV250, 2,189 HRS, EQ0008990, Kansas City, MO ........................................$19,500

2015 Case 580SN WT, Pilot Controls, 1180 HRS, EQ0004234, Kansas City, MO ..................$79,000

2014 Case CX300C, 2010 HRS, EQ0003165, Kansas City, MO ..................................................$174,900

Page 20 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

COVID-19 Response Effort...

Komatsu Becomes Feeding America National Partner More than 37 million Americans face hunger each year and as the COVID-19 pandemic pushes an additional 17 million Americans into food insecurity, Komatsu’s North American business units are partnering with Feeding America, the nation’s largest domestic hunger-relief organization, to donate up to $250,000 to support the organization’s work. “The hunger crisis is growing quickly in the face of COVID-19,” said Rod Schrader, chairman and CEO of Komatsu’s North American operations. “We are honored to partner with Feeding America to support their work to rapidly scale to meet the rising needs of our communities.” The situation is changing rapidly, but Feeding America predicts its network of local food banks will need an additional $1.4 billion over the next six months to provide food assistance to people facing hunger — a 30 percent incremental

Komatsu’s North American business units are partnering with Feeding America, the nation’s largest domestic hunger-relief organization.

increase to the nonprofit organization’s operating costs. The network of 200 food banks partner with more than 60,000 soup kitchens,

food pantries, churches and other community organizations to deliver food, even in the midst of a global pandemic.

“Feeding America is grateful to Komatsu and its employees for their generous support of our neighbors who face hunger during

these uncertain times,” said Lauren Biedron, vice president of corporate partnerships at Feeding America. “Their donation will help food banks serve communities hit the hardest by the COVID-19 pandemic.” Komatsu America Corp., Komatsu Mining Corp., Modular Mining and Hensley Industries — all North American subsidiaries of Tokyo-based Komatsu Ltd. — are joining together in the effort to support Feeding America’s COVID19 Response Fund. The business units are donating $150,000 and will provide a 2-for-1 match of employee donations up to $50,000. The companies are dedicating an additional $100,000 to local organizations in the communities in which they operate throughout North America, to support specific charitable efforts and needs in the areas of medical supplies and support, food insecurity and community funds. 

Gradall Introduces XL 5330 V TrackStar for Rail Work Gradall Industries Inc. has introduced the XL 5330 V model to its TrackStar collection of versatile railway maintenance machines, meeting the need for greater boom reach and lift capabilities. Designed for railroads, municipal railways, city transit systems and others involved in rail construction, repair and right-of-way work, the XL 5330 V is the largest model in the Gradall TrackStar collection. “The new XL 5330 V can reach out 25 feet to either side of the track center line, creating a 50-foot swath,” said Mike Popovich, Gradall vice president of excavator products. “That extra reach makes it ideal for mowing, trimming vegetation, cleaning up landslides, spreading ballast or gathering logs and debris with a grapple. “In addition, the XL 5330 V has an extra 1,000 pounds of lift capability, when compared with existing TrackStar models,” added Popovich. “We added this lift capability for rail contractors who want to use heavy attachments like an undercutter, or to handle big tie bundles or install heavy components such as pre-made switches.” Gradall Boom Advantages TrackStar models are distinguished by their low-profile telescoping, tilting Gradall boom design. With a 220-degree full boom tilt capability, without any loss of boom-end power, Gradall TrackStar machines can efficiently position attachments to productively build and repair rail crossings, grade and excavate slopes and ditches and cut back overhanging trees, according to the manufacturer. For even more attachment positioning versatility, Gradall

offers an optional hydraulic coupler on TrackStar models with 360-degree continuous attachment rotation and an extra 110 degrees of tilt motion. The coupler also accommodates a wide range of attachments designed for railway maintenance efficiency, which can be changed hydraulically from the operator cab. Among the available TrackStar attachments are excavating, ditching, dredging and pavement removal buckets as well as a tree limb shear, single-tooth ripper, fixed thumb grapple, sleeper changer, sleeper layer, flail mower, a Kinshofer NOX rotator and a ballast tamper, bucket, broom and blade. Exceptional Mobility, Gradall Tradition The Gradall rough terrain wheeled undercarriage can efficiently travel over pavement and rails at speeds up to 20 mph, enabling them to get on and off track faster and move quickly over rails to work sides. XL 5330 V models have the extra security of automatic digging brakes as well as excellent stability to work at both sides of the track without the need for outriggers. Gradall also offers TrackStar models with automatic transmissions and highway speed travel capability. Operators can drive these models at speeds up to 60 Designed for railroads, municipal railways, city transit systems and others involved in rail construction, repair and right-of-way work, the XL 5330 V is the largest model in the Gradall TrackStar collection.

mph, quickly accessing crossings and returning to the safety of the equipment yard without the need for a lowboy trailer. A host of standard operator cab features include air conditioning, removable front window, an adjustable seating module with built-in joystick controls and a switch to select Gradall, SAE or Deere joystick patterns. TrackStar machines use a single Volvo Penta Tier 4f engine with easy-to-access routine service locations. A network of authorized regional distributors supports all Gradall excavators, supplying service advice and authorized Gradall parts. For more information, call 800/445-4752 or visit gradall.com/railroad. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 21

Contact Rollie Aspenson (Used Equipment Manager)

at 608-220-1723 or Lewis at 608-837-5141 ext. 1019

We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.

Six Locations in Wisconsin to serve you! Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Plover (Stevens Point) • Mt. Pleasant (Racine) 2012 CATERPILLAR D6T

2013 JOHN DEERE 450J

2018 JOHN DEERE 850K WT

Stk #C94476, Cab w/ AC, Lever Steer, Low Ground Pressure, 32" Pads, Torque Convtr Trans, 165" Blade, Ripper, 6515 hrs ........................$165,000

Stk #C94120, ROPS, Low Ground Pressure, 24" Pads, Power-Angle-Tilt, 115" Blade, 1540 Hrs .......... ..............................................................$59,500

Stk #932924, Well Maintained Rental Fleet Unit, Semi U Blade, 349 Hours ......................$243,000 WITH WARRANTY

2015 JOHN DEERE 160G

2015 CATERPILLAR 323F

2014 CASE CX160

Stk #C91695, Cab w/ AC, Long Arm, Standard Boom, Long Track, Wide Pads, 28" Pads, Aux Hydraulics, Coupler, Less Bucket, 1601 hrs ..............$139,900

Stk #C94159, Cab w/AC, Cntrl Pattern Select, Long Arm, Standard Boom, Wide Pads, Aux Hyds, Coupler, Hyd. Thumb, 42" Bucket, 1971 hrs ........$169,000

Stk #C94521, Cab w/ AC, Medium-Long Arm, Std Boom, 24" Pads, Aux Hyds, Coupler, Hydraulic Thumb w/ 48” Bucket, 5840 Hrs..........................$78,500

2017 JOHN DEERE 672GP

2015 JOHN DEERE 624K

2010 JOHN DEERE 710J

Stk #C93381-2, Cab w/ AC, Tall Cab, EH Controls, 14' Blade, 17.50 Tires, Radials, AWD, Aux Hyds, Front Scarifier, Ripper, 1489 hrs ............$249,000 WITH WARRANTY

Stk #C91780-2, Cab w/ AC, Quick Coupler, Ride Control, Dual Diff Locks, 20.5 Tires, General Purpose Bkt, 1940 hrs ..........................$147,000 WITH WARRANTY

Stk #C94615, Cab w/ AC, Pilot Controls, 2WD Power Shift Tran, Ride Control, Less Bucket, 21L Tires, 2754 hrs ......................................$38,000

www.brookstractor.com

Page 22 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rock Machinery Opens New, Larger Facility in Allenton, Wis.

A new office, service bay and 8,000 sq. ft. warehouse are some of the amenities of Rock Machinery’s new facility.

Rock Machinery offers replacement components and full-service repair on all makes and models used in the aggregate industry, including cone crushers, jaw crushers, screens, conveyers and more.

“We strive to offer excellent service, competitive pricing and quick turnaround times to suit customer requests,” said Bryant Fazer, president and sales manager of Rock Machinery.

Rock Machinery Co., a field distributor offering equipment, parts, service and rentals, has opened a new facility in Allenton, Wis. Located at 7675 Pamperin Way, the 15,000 sq. ft. building sits on 10 acres. A new office, service bay and 8,000 sq. ft. warehouse are some of the amenities. Perhaps the most prominent feature is a new repair facility with a 50,000-lb. capacity crane to better serve its customers. “We have been renting space the last couple winters to complete repairs and it made good sense to invest in our own facility to continue to best service our customers,” said Bryant Fazer, president and sales manager of Rock Machinery. “We appreciate the strong support from our customer base for repairs already cycling through

the shop. We strive to offer excellent service, competitive pricing and quick turnaround times to suit customer requests.” Rock Machinery offers replacement components and full-service repair on all makes and models used in the aggregate industry, including cone crushers, jaw crushers, screens, conveyers and more. The company also stocks and services many popular brands, including Telsmith, Kafka Conveyors, Rubble Master, CEMCO, Durex, Excel, EIW, Continental, PPI, Rim-Tec Castings, Spokane Industries, Eagle Foundry, Trio, Weir Minerals and more. For more information, visit rockmachinery.com. 

Rock Machinery stocks and services many popular brands.

Located at 7675 Pamperin Way, the brand new 15,000 sq. ft. building is located on 10 acres.

Eaton RESA Gains AED Foundation H.S. Recognition The AED Foundation (AEDF) announced the recognition of the Heavy Equipment Technology Program at Eaton Regional Education Service Agency (RESA) located in Charlotte, Mich. “We are pleased that Eaton RESA has chosen to demonstrate its commitment to academic excellence and continuous improvement through the process of recognition,” said Jason Blake, AED Foundation executive vice president and COO. “I would like to thank longstanding AED member AIS Construction Equipment Corporation, which houses the program and is instrumental in its success. AEDF high

school recognition signifies to equipment industry stakeholders that your school has achieved a level of excellence. This is based on meeting secondary school technical standards developed with your AED Foundation accredited sponsor and the diesel technology department at Lansing Community College. These standards align with The AED Foundation’s national post-secondary construction equipment technology standards.” For a high school to achieve recognition, the school must partner and work with an AED Foundation accredited college program as well as the local equipment industry to develop curriculum and needed resources.

This also involves an articulation agreement whereby high school students can receive college credit. The program is a “community-based, school-to-work” plan, where local dealers, colleges, high schools and industry stakeholders work together as a task force to meet mutual needs. The AED Foundation began recognizing high school diesel-equipment technology programs with its AED Foundation High School Program Recognition initiative in 2017. “We are excited the Eaton RESA program is now AEDF recognized through our sponsoring AEDF accredited school, Lansing Community College,” said Anthony Wieber,

lead instructor of the Heavy Equipment Repair Technician Program at Lansing Community College and instructor at the Eaton RESA Heavy Equipment Technology Program. “This opportunity affords our students exponential career opportunities in the construction industry.” The AED Foundation is committed to developing and improving equipment distribution industry partnerships that meet the mutual needs of local dealers, manufacturers and technical colleges. The AED Foundation is proud to be affiliated with Eaton RESA and dedicated to supporting the Heavy Equipment Technology Program’s ongoing success. 

Pages 23-36

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Revolver Solves Blaine, Minn., Street Sweeping Dilemma According to the state of Minnesota Pollution Control Agency “street sweepings are materials such as sand, salt, leaves and debris removed from city streets, parking lots and sidewalks to prevent these materials from being washed into storm sewers and surface waters, and is done to improve the appearance of public roadways.” Regarding reusing street sweepings, the same report states that “test results have shown street sweepings from normal sweeping operations are safe and acceptable for reuse in many areas.” The state mandated that unless street sweepings had the organics and trash removed from the aggregates, the street sweepings could not be reused and had to be disposed of in an approved landfill. The City of Blaine Presented with the increased cost of disposing this material every year from city streets, a large suburban area like the city of Blaine, which has approximately 260 miles of streets that need to be kept clean and produces a lot of unusable refuse and materials, the search was on for a more affordable process. “The city of Blaine is required by the Minnesota Pollution Control Agency [MPCA] to manage street sweepings to prevent sand, salt, leaves and debris from entering into storm sewers and surface waters and to help roadways look cleaner. The city has had a process in place for quite some time but it hasn’t been as efficient at separating out the various sources making it more difficult to find outlets for the materials,” said Rebecca Haug, Water Resources manager of the city of Blaine. According to Haug, a solution was found last year after being invited to equipment dealer Ruffridge Johnson’s Centerville, Minn., headquarters. Ruffridge Johnson Shows Solution In the spring of 2019, Dave Hosch, president of Ruffridge Johnson, and his team showed city representatives the perfect solution. “We took on Revolver at the beginning of 2019 and it has turned out to be a great addi-

The Revolver’s applications include topsoil, loam, black dirt, compost, mulch, sand and gravel, construction and demolition debris and recycling.

(L-R): Brad LeTourneau of the city of Blaine, and Chad Becker and Travis Lenz, both city of Blaine equipment operators, are ready to see what the Revolver RT508 can do.

tion for us. Besides being an easyto-use, well-built machine, it can be hauled with a 1-ton truck. This makes it a great unit for municipalities and small contractors,” said Hosch. After seeing what the Revolver RT508 could do — its ease of use and how efficiently it processed materials — the city realized it had found the answer and purchased the machine. It was immediately put to work for spring cleanup and was in continuous use through last year’s fall leaf season. “Working with the men and women at Ruffridge Johnson was a great experience. They invited us to their facility to meet with the manufacturer and ask questions. The service department came out to our site and within 20 minutes we were up and running. Just a great company to work with,” said Brad see REVOLVER page 26

Page 24 • May 30, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Improves Performance With Its Latest Nordberg HP900 Cone Crusher Metso is introducing the new Nordberg HP900 Series cone crusher for the aggregate and mining markets. The HP900 is an upgrade to the HP800 cone crusher that has more than 175 installations. Approximately 80 percent of the parts are compatible between the two technologies, according to the manufacturer. The HP900 comes with improved kinematics, raised pivot point and power increase which leads to a 15 percent capacity increase. A new lubrication system is included to help support the new performance level. “Often copied but never matched, HP cone crushers have satisfied many aggregates and mining customers around the world. With the HP900 we go straight to the point, with increased performance and reduced CAPEX”, said Jim Bathie, vice President, mining crushers at Metso. CAPEX, OPEX Efficient Performance The HP900 is delivered pre-assembled, pre-wired and factory tested. The equipment is packaged with a rubber-pad mounted subframe and guards allowing quick and safe setup with a compact foot-

print. These factors result in reducing installation time by 50 percent, according to the manufacturer. Due to the tramp-release system, the new crusher allows passage of tramp iron, minimizing production stoppages and protecting internal components. Top service access to the head, shaft, eccentric and other major components make disassembly safe and easy. Additionally, Metso wear parts can be replaced up to four times faster than similar cone crushers, according to the manufacturer. The crusher is equipped with Metso’s IC70C automation system to ensure optimum operating parameters enabling the full potential. The IC70C is designed to be easy and simple to use. All information can be tracked using a single screen and features help and trouble-shooting options. For more information, visit metso.com. 

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255 www.lec1.com

The HP900 is an upgrade to the HP800 cone crusher that has more than 175 installations. Approximately 80 percent of the parts are compatible between the two technologies, according to the manufacturer.

Doosan Preps for N. American Launch The Doosan DX250WMH-5 wheel material handler was shown for the first time in North America during ConExpo-Con/AGG 2020. Paired with a multi-grapple at ConExpo, the 27.5 ton (25 t) material handler provides increased lifting performance. The DX250WMH-5 replaces the previous Doosan DX210WMH-5 and is scheduled to be available in North America in mid-2020. New to the DX250WMH-5 material handler are two arm cylinders straddling the machine’s boom and arm. This update improves the machine’s performance and control of the material during the lift and placement cycle. A droop-nose arm continues to be standard, but Doosan is now offering an optional straight arm, which is akin to the company’s excavator lineup. A straight arm, with its included bucket cylinder, provides enhanced control of attachments, such as a multigrapple, and placement of material. Traditional excavator attachments can be mounted to the material handler’s excavator arm for further machine versatility. The DX250WMH-5 material han-

LARGE EQUIPMENT DEALERS

Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer

The DX250WMH-5 material handler complements two crawler Doosan models — the DX225MH-5 and DX300MH-5 — to provide customers in scrap, solid waste and recycling applications with three choices to best match their lifting and sorting needs.

dler complements two crawler Doosan models — the DX225MH-5 and DX300MH-5 — to provide customers in scrap, solid waste and recycling applications with three choices to best match their lifting and sorting needs. The wheel model comes standard with

a hydraulic cab riser for enhanced visibility when loading and unloading material. Four outriggers, also standard, provide added stability when the material handler is in use. For more information, visit DoosanEquipment.com. 

6750 Millbrook Rd. • Remus, MI 49340 9340 • 1-800-952-0178 FIND US ONLINE WWW W.BANDITCHIPPERS.COM W.BANDITCHIPPERS.COM

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 30, 2020 • Page 25

Bandit Buuilds More Thaan Machines.... Bandit Industries has bbased its reputation on a simple truth – build them strong and stand tand behind our customers. And that’s what we’ve done eveery stepp of the wayy. Every Banditt® machine uses the highhest quality steel and is constructed cted by specialized teams to stand nd up to the toughest jobs. Thhat’s why more professionals truust a Bandit for their toughest jobs. bs. And every machine is backked by unbeatable factory support and an extensive dealer network. ork. 6750 Millbrook Rd. • Remus, MI 499340 • 1-800-952-0178 FIND US ONLINE WWW W.BANDITCHIPPERS.COM .

When it comes to yourr business, Bandit Industries doeesn’t just build machines. See hoow Bandit can build your bbottom line. Contact your local authorized a Bandit dealer today orr visit www.banditchippers.com to learn more!

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

Bobcat of Indy 1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640

West Chicago, IL 630-293-0606 Yorkville, IL 630-553-0150

Mokena, IL 708-596-8050

Merrillville, IN 219-381-3006

Wauconda, IL 847-526-4255

www.atlasbobcat.com

1200 East Highway 13 Burnsville, MN 55337 952-894-0894

588 Outpost Circle Hudson, WI 54016 715-531-0801

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

www.tristatebobcat.com

Cincinnati, OH 513-874-8945

Reynoldsburg, OH 614-863-1300

Mt. Orab, OH 937-444-3865

Lexington, KY 859-254-3936

Hillard, OH 614-876-1116

www.bobcat-ent.com

2935 Bluff Road Indianapolis, IN 46225 866-442-3052

4489 S Indianapolis, Road Whitestown, IN 317-769-4946

2075 E CR 67 Anderson, IN 765-643-4222

2002 West 3rd Street Bloomington, IN 812-287-8042

www.bobcatofindy.com

Page 26 • May 30, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Revolver RT508 Features Reversible Drum, Extension REVOLVER from page 23

LeTourneau, Stormwater Utility foreman of Blaine. Revolver RT508 Provides Clean Sweep According to the manufacturer, the Revolver RT508 is an easy-to-use, easy-totransport portable trommel screening plant. Its applications include topsoil, loam, black dirt, compost, mulch, sand and gravel, construction and demolition debris and recycling. The drum of the RT508 offers standard features that include: • A 5-ft. diameter by 8-ft. long with choice of screen size • Variable speed rotation for optimum screening action and product control • Reversible drum to prevent plugging • Heavy-duty brush screen cleaning system with ground level adjustment • 24-in. drum-mounted rubber boot extension • Optional drum design to accommodate a range of materials Presented with the increased cost of disposing this material every year from city streets, especially for a large suburban area like the city of Blaine, which has 35 sq. mi. of roads that need to be kept clean and produced a lot of unusable refuse and materials, the search was on for a more affordable process.

After seeing what the Revolver RT508 could do, its ease of use and how efficiently it processed materials, the city of Blaine purchased the machine.

"This unit has been great to work with, easy to use, takes five minutes to change out the screens for different aggregate sizes,” said Travis Lenz, city of Blaine storm water utility staff member and equipment operator. “We remove large items like logs and asphalt chunks before we load it and then as it is processing, the organics and trash come out the front, clean screened aggregates come out the back.

Revolver offers a choice of Caterpillar or Kubota diesel engines, which are supported by nation-wide service and support by Caterpillar and Kubota dealers across the country. The enclosed engine compartment offers easy access for service and glow plugs with adjustable settings. The feed hopper of the RT508 features a low dump height; a capacity of 4.5 cu. yds., foldable hopper wing flares and a 36-in. wide variable speed belt feeder. Skid steers, tractor backhoes, hydraulic excavators and wheel loaders with up to a 9-ft. wide bucket all work well with the RT508. According to Haug, “The benefits are the cost savings in being able to separate out the aggregate from the compost from the waste and properly dispose of each source. The aggregate is able to be mixed with rubble and reclaimed into new mixes. The compost is brought to a composting facility to become dirt again and the waste is properly disposed of at a landfill rather than in our natural water systems. Without this screener, all of the material would have to be landfilled.”

Operator Test CEG stopped by to see the machine in action and met with Blaine storm water utility staff members and equipment operators Travis Lenz and Chad Becker. "This unit has been great to work with and easy to use. It takes five minutes to change out the screens for different aggregate sizes,” said Lenz. “We remove large items like logs and asphalt chunks before we load it and then, as it is processing, the organics and trash come out the front. Clean, screened aggregates come out the back. We remove the trash and the organics go to our compost sites for use and the aggregates get mixed into paving and fill projects. “This is a great product and does exactly what we were looking to do. It can be towed with a 1-ton truck so it is light and portable and can be set up to use in minutes. It is a low-maintenance machine. I can’t say enough about how happy we are with this unit.” Haug said the city is in the process of having a fabric-covered building built to house the screener and the sweepings. This will allow for greater efficiency. For more information, visit revolvertrommels.com or rjequip.com.  CEG

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 30, 2020 • Page 27

AIS CONSTRUCTION EQUIPM MENT CORP P.. www.aisequip.com m 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502

S Saginaw 46000 AIS Drive Bridgep port, MI 48722 989-777-0090 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

BUTLER MACHINERY CO. CO www.butlermachinery.com y 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. S 46th St. St Grand Forks, ND 58201 701-775-4238

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. N Louise Ave. Ave Sioux Falls, SD 57107 605-336-3010

CENTRAL SERVICE & SUPP PL LY Y, INC. www.centralsands.co om 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8 8600

RB SCOTT COMP PAN ANY IINC. www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792

ROAD BUILDERS MACHIINERY & SUPPL LY YC CO., INC.. www.roadbuildersmachine ery.com y 1001 S. 7th St. 5601 Fleetcher Ave. Kansas City, KS 66105 Linccoln, NE 913-371-3822 402-3 325-0447 4115 S. 90th St. 4949 Ju uergen Rd. Omaha, NE Grand Island, NE 402-331-9200 308-3 384-2620 1303 S. Chestnut St. Norfolk, NE 402-316-4640

™

Page 28 • May 30, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

A WIRTGEN GROUP COMPANY A

THE EVOLUTION OF INNOVA VATION. T THE EVO-LINE FROM KLE EEMANN

EVO IT’S ALL ABOUT EVOLUTION. The demands placed on plant s in the contrac ting sec tor are high: maximum output matched with cos tef fec tive operation – and all for the mos t diverse applications. This is exac tly what dis tinguishes KLEEMANN E VO -Line plant s. Thanks to highly innovative solutions, such as an advanced material flow concept, continuous feed sys tem, out s tanding safet y concept s and many more, KLEEMANN’sE VO -Line mobile jaw crushers, impac t crushers and cone crushers deliver a solid plus in per formance, ef ficienc y and versatilit y. Progress calls for real innovation – the KLEEMANN E VO -Line. w w w.wir tgen- group.com//a america

WIR RT TGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T Telephone: elephone: 615-501-0600

www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

www.rolandmachinery.com

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Construction Equipment Guide â€˘ Recycling Section â€˘ www.constructionequipmentguide.com â€˘ May 30, 2020 â€˘ Page 29

Continuing Education is FREE!! Adjoining the 100,000 sq. ft. US headquarters just outside Charlotte, North Carolina, is the home of the SENNEBOGEN Training Center.

PURP POSE-BUIILT

FROM THE T GROUND D UP

Here, service tech hnicians, parts personnel and machine operatorss receive expert hands-on and classroom training absolutely free.

The two service level courses are designed to build on each other. Ou ur trainers p provide instruction on proper mainten nance procedures and system troubleshooting. The operator familiarization course was created d to help operators maximize the machineâ€™s cap pabilities using best practices GPS FĆŒDJFODZ BOE E TBGFUZ 5IF QBSUT USBJOJOH course teaches parts counter teams how to better understand d the parts manuals for their SENNEBOGEN matterial handlers. According to SEN NNEBOGEN, there is no fee for course atten ndance or course material GPS 4&//&#0(&/ / EFBMFST TUBĆ‹ BOE UIFJS customers. â€œOur objective is to create North Americaâ€™s best-trrained service network and provide our custom mers with increased machine availabilityâ€?, said Constantino C Lannes, President of SENNEBOGEN LLLC.

Available T Training ng C Courses â€˘ Serrvic vice Level 1 â€˘ Serrvic vice Level 2

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com Louisville, KY 502-491-4000 Evansville, IN 812-425-4491

See how SENNEBOGEN can purpose-build the right machine m for you

â€˘ Parts Training â€˘ Operator Familiarization

Stanville, KY 606-478-9201 Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

HOWELL TRACTOR & EQUIPMENT LLC www.howell tractor.com Gary, IN 219-810-6327 Peru, IL 800-342-6072

www.ssennebogen s -na com | +1-7044-347-4910 -na.c

GIBSON MACHINERY LLC www.gibson machinery.com Cleveland, OH 440-439-4000

ROLAND MACHINERY CO. www.rolandmachinery.com Carterville, IL 618-985-3399 East Peoria, IL 309-694-3764 Bridgeton, MO 314-291-1330 Columbia, MO 573-814-0083 Cape Girardeau, MO 573-334-5252 Palmyra, MO 573-769-2056

Franksville, WI 262-835-2710 DePere, WI 920-532-0165 DeForest, WI 608-842-4151 Eau Claire, WI 715-874-5400 Schofield, WI 715-355-9898 Slinger, WI 262-644-7500 Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO.

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com

www.vlpco.com Kansas City, MO 800-878-9290

Savage, MN 800-888-9515

East Moline, IL 800-633-9114

Joplin, MO 800-878-8223

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Brookline Station, MO 800-955-2729

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Wichita, KS 800-878-3346

Sioux City, IA 800-633-9104

Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

ASCENDUM MACHINERY www.Ascendum Machinery.com Bismarck, ND 701-250-4882 Fargo, ND 701-271-2369 Williston, ND 701-577-1249

Page 30 • May 30, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Rubble Master Celebrates 20 Years of Mobile Crushing in U.S.

The RM 120GO! mobile impact crusher in combination with the RM MSC8500M incline screen.

Rubble Master, a market leader in compact crushing, focuses on the best weight to throughput ratio with maximum efficiency, best service and digital support. At ConExpo Rubble Master exhibited the RM 70GO! 2.0 crusher in combination with its RM HS3500M screen, the RM 120GO! with the RM MSC8500M-2D as well as the RM MTS2010S. RM 70GO! 2.0 — Defined Final Aggregate in Single Pass With Mesh Screen Starting this year, a combination that has been available for the larger compact systems for a while is now offered with the RM 70GO! 2.0. The proven integrated mesh screen with refeeding belt is now available with the most compact crusher in the RM GO! series to enable crushing and screening in a single pass. The additional equipment is transported together with the crusher unit. Compact dimensions during operation as well as during transport - combined with high throughput - are the main requirements for the RM 70GO! 2.0. These are fulfilled with a transport width of 7.1 ft. Even with the mesh screen and refeeding belt installed, there are no changes to the transport width. This means that no accompanying vehicles or additional special permits are needed. “Full integration into the system’s control system also provides a high level of safety for the operator, which has the highest prior-

ity for us in all our innovations,” explained Gerald Hanisch, Rubble Master founder and CEO. The mesh screen makes the mobile crusher even more efficient. The final aggregate is screened to the required final aggregate size in a single pass. Precise sorting accuracy and a throughput capacity of up to 132 tph is included. The RM MS 70GO! screen is installed directly on the RM 70GO! 2.0 crusher and no auxiliary equipment such as cranes or diggers are needed for assembly. A closed loop is set up using the refeeding belt to produce a finished high quality final aggregate in a single processing step. Depending on the application, the screen decks can simply be swapped or combined.

RM 120GO! — Quality Right Down to Smallest Detail The flagship RM 120GO! crusher has a throughput capacity of up to 385 tph and meets the highest specifications in terms of performance, ease of maintenance, efficiency and design. Weighing just 38 tons, the RM 120GO! is the most compact crusher in its class. The diesel-electric drive concept allows location-independent, environmentally friendly, low-noise and low-emission operation. “Everything is so much easier and readily available on this machine. There is no safety that you are risking. RM has designed everything to be as user-friendly as it can be all the way down to changing blow bars. My guys have thanked me time and time again for this

RM 70GO! 2.0 now with mesh deck screen.

machine vs. the one we had before just because it is so much easier on them,” said Bryce Swain, BTS Equipment, San Diego, Calif. RM GO! SMART — New Dimension in Service RM GO! SMART represents a new era in human-machine interaction. The infrastructure RM developed for this system not only promotes intelligent operation of the machine, but also enables remote processing and display of real-time trends and historical machine data. A GSM/UMTS connection is not essential because the data can be saved temporarily on the device. You can use any cellular device like a smartphone or tablet to visualize and process the information. RM GO! SMART is an ideal add-on to the proven RM GO! principle, which is appreciated by customers all over the world for its simplicity and intuitiveness. RM Screen Line — Everything From Single Source As a full solution provider, RM offers a product range that includes screens and conveyor belts. The most compact scalper — the RM HS3500M — is the perfect complement to RM crushers, according to the manufacturer. As stand-alone products, this screen and the RM MSC8500-2D post screen ensures a high throughput capacity even in confined spaces. For more information, visit www.rubblemaster.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 30, 2020 • Page 31

573-635-8700 • 888-972-2537 • www.rackersequipment.com

#141147-"NEW" RDO 5x12 2-deck screener with CAT C-4 water cooled engine. Remote control for feeder. Ball deck and grizzly hopper (no grizzly). 2-30" side discharge conveyors. Mounted on tandem axel 5th wheel chassis.

#510113 (2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4892 hours) & HD-709 drifter (2203 hours). Set up for T-45 Steel (14′ starter & 12′ changes). Has anti-jam circuit and dust collector. One-owner machine and all service records available. Well maintained and in very good condition.

#111070 Pioneer 2854 jaw crusher with 50x18’ VGF and electric motor all on a 3-axle chassis. Good condtion.

DRILLS & COMPRESSORS #530022 Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510112 (2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4840 hours) & HD709 Drifter (2261 hours). Set up for T-45 steel (14′ starter and 12′ changes). Has anti-jam circuit and dust collector. One owner machine & overall, very good condition #510087-Furukawa 9E hydraulic drill with Isuzu diesel engine. 10764 engine hrs, 4619 impact hrs. Anti-jam circuit, dust collector, uses T-45 steel, 14 ft starter with 12 ft changes. Good condition. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.

#141149-Track-Mounted CEC 5×12 2-deck Screen-It. water cooled John Deere 99hp engine (384 hours). Has grizzly hopper, ball tray, heavy duty variable speed drive, and remote control. Very Good condtiion.

#121056-Hazemag APS1622KH secondary impactor with (2) 400hp Toshiba electric motors, 48″x30′ underconveyor with impact idlers (5″ cans), and stand. 4-bar rotor (1600×2250), 14″ max feed size, and up to 650 TPH capacity. Overall, very good condition.

#161003 (New) Willis 36”x75’ Radial Stacker with folding head/tail sections, pintle hitch, 20hp electric motor, #6 gearbox, 3-ply belt, 35 degree idlers, and 5” Cema C idlers.

#112007-Kennedy Van Saun 3648 single rotor impact with electric motor & Deister 50”x18’ VGF on 3-axle chassis. #112044-Nordberg LT-1213 Track Mounted Impact. with 42”x12’ VGF, 36” cross belt magnet, and 46” underconveyor, good condition. SCREENS #141120 Nordberg 6x20 3-deck incline screen with ball tray on bottom deck. No motor, but was a running take out. Good condition.

EARTHMOVING #810034-Euclid R-35 truck has an engine that is a Detroit diesel V12 with an Allison 6-speed automatic transmission. The tires are 1800x33 all in good condition about 50%. Bed liner looks good as does the remainder of the truck. No leaks. Runs good. #810035-Euclid R-35 Haul Truck with Cummins KT1150 engine, Allison auto-transmission (weak reverse), and Phillipe Hagenbush tailgate. 1800:33.5 tires approx. 40-80% and good bed. #410063-CAT D9H w/ EROPS cab w/ A/C, JAWS & IMPACTS straight blade w/tilt. Single shank, 4-barrel rip#111060-Gruendler 24x42 jaw crusher. Jaw per. 24" pads. U/C (overall approx 70%). Rebuilt engine, trans, and finals (HMR 2994) dies 80%. Good condition. #111063-Terex Pegson 1180PT 32"x44" self- Left Trunnion is available but needs to be installed. Overall good condition. contained jaw plant w/ operator-controlled #410070-CAT D6R dozer with 10' straight track maneuvering. Large feeder w/ step griz- blade with good cutting edge. Has EROPS cab zly section, grizzly pass-by chute, & discharge with air. Glass all good. 22" single grouser conveyor. Plant is currently in use & has pads, overall condition of undercarriage is approx 5082 (04/21/17)hrs. Very good condi- 60%. Pins have tit on drive side. Has 4600 tion. hrs.

#152026 Eagle 44x32 Twin Sandscrew with 90% Shoes, Single drive gear box and grease bearing, overall good condition.

#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.

#510115 Furukawa 1200ED hydraulic rock drill with 12,206 overall hrs & 3154 hours on Cummins 6.7 remanufactured engine. 5776 impact hrs but only 39 hours on drifter reseal. Includes cab with a/c & heat, dust collector and an anti-jam circuit. Good condition.

PER ERFORMA O ANC OR CE UND DER R PRE ESS SSURE E Since 1942, Allied® hydraulic attachments ha ave consistently stepped up to meet challenges from contractor t s and municipalities who need eed to rent stro onger equipmen uipment with more e reliabili e ty and operating efficiency. Our Rammer® and Allied hydraulic hammer mers, as we ell as our Ho-P Pac® and Skid-Pac® compactors s, are designed to actua ally verify e and improve your carrier rrier ROI decisions decisions. Proving v again and again that nobody dy kno knows how to o deliver e hydr d aulic produc o tivity under prressure like Allied. Fo or de etails, visit an Allied distribut utor or call 800-321-1046 46.

TH HERE’’S S NO SUBS STITUTE FOR E EXP PERIENCE ER RIENCE

ALLIEDCP.com c | 800.3211.1046

FEEDERS #132015-Continental Gin 48"x25.5' apron feeder. Large feed box. Flights are approx 80+%, good sprocket, & jackshaft drive gears. 60hp motor and gear box, but has removable mount (for transport). Heavy duty apron feeder. Shipping dims: 8' 7" tall & 30' long. SECONDARY CRUSHERS #121033 Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 bar rotor. No power. Crusher is in good condition. #121053-Cedarapids 5040 Hammermill secondary crusher with 5x16 3-deck screen. Has rotovator, 36" return and 36" front discharge conveyors. All mounted on tandem axle chassis. Plant is all electric except the hammermill is diesel jack shaft driven. No power on mill. Power unit and control panel are available separately for $12,000. Engine runs, but needs to be rebuilt. #121052-Svedala B9100 Portable VSI. with 36”x40 under conveyor, twin 300hp electric motors, switchgear, and 25hp motor for conveyor, only 900 hrs and set w/rock shelf, good condition. #121055 New CEC 102×152 (approx. 42.5” x 61”) secondary impact crusher with 3-bar rotor and hydraulic clearing. No motor, no stand, but does have crusher shive. Excellent condition, never used.

Jefferson City, MO 65110

HIGHWAY EQUIPMENT COMPANY

HOWELL TRACTOR AND EQUIPMENT www.howelltractor.com

www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391

480 Blaine St. Gary, IN 46406 219-810-6327 2770 May Rd. Peru, IL 61354 815-224-3003

Page 32 • May 30, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Innovation In Portable Trommel Screening Equipment. The Revolver RT508 is a state of the art trommel screening system, engineered and manufactured in North America to exceed the rugged, heavy duty standards North American contractors demand. Portability, high production, efficiency, user friendly, all are key benefits with this very affordable plant designed to provide a low processing cost per yard in a wide variety of materials.

The RT508 boasts specifications that meet or exceed those of much bigger plants. The 5 diameter drum is the biggest in its class in the industry. The 36 variable speed belt feeder is the widest in its class in the industry. Add the driving power of either the Caterpillar or Kubota diesel engines and the RT508 becomes a very attractive plant suitably productive, no matter what the conditions.

Applications: Topsoil, Loam, Black dirt, Compost, Mulch, Sand and gravel, Construction and demolition debris, Recycling

Ruffridge-Johnson Equipment 2065 Commerce Drive • Centerville, MN 55038 • 612-378-9558 www.rjequip.com

Construction Equipment Guide â€¢ Recycling Section â€¢ www.constructionequipmentguide.com â€¢ May 30, 2020 â€¢ Page 33

CRUSHING

MA ATERIAL TERIAL HANDLING HANDLING

SCREENING

TRACKS

WASHING W ASHING & CLASSIFYING

6WHSNH &W Traverse, MI 49 685 231- 943 - 3700 )D[

3RQWLDF 7UDLO 1HZ +XGVRQ 0, 48165 248 - 356 - 5200 )D[

2OG 6 *D\ORUG 0, 989 -731- 9988

( 0LOH 5RDG 6WHUOLQJ +HLJKWV 0, 0, 48312 586 - 474 - 5063

The complete sour s ce for equipment in the aggregate, construction ction and recycling indu ustries. Offering industry--leading brands such as the Pioneer Jaw Crusher, Kodia akÂ® Plus Cone Crusher, Supe erStackerÂ® Â® Â® Â® Extendable Stack ker, ProSizer Mobile Screening Plant, Combo Screen, Vari-Vibe a High-Frequency Scr S een, Duo-VibeÂ® High-F Frequency Screen, Series 90 000 equipment, Fast Trrax, Gllobal Trrack and FastPack.

www.kpijci.com

Page 34 • May 30, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

93 8455&'1* 1&3) (1*&7.3, (43 879(8.43 *69.52*38

5 58 8 8 8

3*; 43.( 8*(-3414,=

5IVJSVQERGI .QTVSZIQIRX

'1 1 * *< < : :8 ' * < : 8

8( 1

JEIYWE GSQ JE

Transforming Demolition Waste...

ALLU Transforms Construction Waste Into Valuable Materials The ALLU series of attachments are being used to literally transform construction waste from demolition projects into valuable materials, according to the manufacturer. The unique attributes of the ALLU Transformers, along with the recently launched ALLU Crusher, have enabled asphalt, concrete, soil, bricks and other materials, to be turned into products for reuse. ALLU Transformer screener crushers offer solution for separating, sorting, screening and loading for several different types of demolition materials. The base Transformer comprises of an excavator/ loader/tractor mounted processing bucket which screens, pulverizes, blends, mixes, separates, even crushes, feeds and loads materials. The result is that the material is effectively transformed into highly valuable products, making any business involved in demolition and so forth more efficient, and more profitable. What makes the Transformers an ideal solution for processing demolition materials is that as they are fitted to compact and versatile loaders, meaning that they are able to access even the most hard to get to sites. This enables on site processing, with the materi-

als, such as concrete and bricks, often being reused directly where they are most needed. This results in cost savings when there is less material for the landfill as well as more material for reuse. In addition to cost savings, the environmental benefits are impressive, as the weight of the end product is reduced by upwards of 50 percent, meaning that transport is reduced, and with it any harmful emissions, according to the manufacturer. Latest Development Ideal for Recycling One of the latest developments, which has proven to be ideal for dealing with and recycling demolition materials, is the ALLU TS blade structure. This has been developed to improve productivity with at its core being the configuration of the screening blades that spin between the screening combs. The TS drums are available with two different blade types: standard blades for screening applications and axe blades when a crushing or shredding effect is required. Blade sizes available include 16-32 mm, 2550 mm and 35 mm, with the assembly enabling three different fragment sizes from

the same unit. Fragment size estimation is based on screening comb distance, with it being quick and easy to change from one screening job to another, providing more versatile processing. Due to the TS’s self-cleaning design high capacity operation is ensured, even when the material is wet or contaminated, due to the system’s non-clogging structure, according to the manufacturer. New ALLU Crusher The very latest development from ALLU aimed at the demolition and recycling market is its new crusher series of — initially — three crusher models for excavators in the 10 to 33 ton range. All have purpose developed features that ease their use and optimize performance, whilst providing easy maintenance in the field. Amongst the many customer focused features included on the new ALLU crushers are: • Reversible crushing: This reduces the potential for jamming, blockages, or obstruction with rebar are avoided, while delivering greater levels of production and reducing the need for any manual involve-

ment in the crushing process. • Feed plate design built into the jaw: Ensures that the feeding function in a fully loaded chamber delivers high rates of production with minimal risk of bridging. • Simple mechanical pin adjustment for output size regulation: Makes the entire crushing process easy and safe with quick adjustment for various output specifications. • The crusher ‘opens like a clam’: Through this design easy and quick replacement of wear parts is ensured through ease of access, saving time spent on maintenance, thereby minimizing risk to operators and maximizing productive crushing. Jeroen Hinnen, vice president of sales of ALLU Group said, “By bringing this new product line to market we will be able to provide customers with what they have been looking for. The ALLU Transformer range offers unique productivity and efficiency benefits on a great deal of demolition materials and recycling applications, while the ALLU Crusher range enables hard rock, and heavy duty — such as reinforced concrete — demolition materials, to be effectively reduced.” For more information, visit allu.net. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 30, 2020 • Page 35

Illinois

Indiana

Kentucky

Minnesota

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen Crushing & Screening

Theco, Inc.

7144 N. Harlem Ave. Chicago, IL 60631 www.midwestcrushandscreen.com

847.271.5027

255 N. Hetzler Court Angola, IN 46703 www.powerscreenindiana.com

260.665.5816 • 800.843.4277

11901 Westport Road Louisville, KY 40245 www.powerscreensales.com

800.227.0534

14833 164th Ave. S.E, Big Lake, MN 55309 www.thecoinc.com

763.263.0505

Michigan & Ohio

Missouri & Kansas

AGGCORP

Powerscreen Central

22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net

9001 Hickman Mills Drive Kansas City, MO 64132 www.powerscreensales.com

614.309.6854

502.326.9300

Page 36 • May 30, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Lokotrack® ST4.10™ mo obile screen AIS CONSTRUCTION EQUIPM MENT CORP P.. www aisequip com www.aisequip.com m 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502

Saginaw 4600 AIS Drive Bridgeport, MI 48722 989-777-0090 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

High productio on needs heavy-duty screening Lokotrack a ST4.10 5' x 20' mobile scre een is ideal fo or large-scale aggreg gates production. Its triple deck ck screen produces fo our end produccts.

High capacit y screening Large scale 5' x 20' triple deck screen

The adjustable discharge height on 33' side conveyors makes it a powerful f screen in closed circuit crushing ushing processes together with other th Lokotrack units, and the wide ffeed e d hopper is ideal fo or whee h ell loader fe eeding in sand and gravel screening. Contacct your distributor or visit www.metso.com for more.

BUTLER MACHINERY CO. www.butlermachinery.com y 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 Bismarck 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46th St. Grand Forks, ND 58201 701-775-4238

Closed circuitt Ideal for closed circuit processes

Hybrid power Bi Power for elec tric op perations

CENTRAL SERVICE & SUPP PL LY Y, INC. www.centralsands.co om 4219 E. 50th St. • Des Moines, IA A 50317 800-247-2400 • 515-964-8 8600

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792

Track-mounted unit On-site mobilit y and easy to transpor t bet ween sites as a single unit

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 37

GET A HAND DLE ON OPERAT ATING COSTS Penn Jersey Machinery

Terex® Fuchs Material Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® ere Fuchs material handlers help you get a handle on your business with: An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus s compettiti itive material handl dlers The Tere e x Fuchs Tel e ematics System for real time fleet and equipment metrics to manage it all Plus you can always rely on your local Terex Fuchs distributor to keep your material handlers operating at peak efficiency, with Tere e x certified parts and trained service technicians.

Deptford, NJ 856-227-6400 ERB EQUIPMENT COMPANY www.erbequipment.com 200 Erb Industrial Dr. Frenchtown, NJ Fenton, MO 63026 908-824-4200 636/349-0200 Foristell, MO 636/463-2500 Lionville, P PA A Cape Girardeau, MO 610-363-9200 573/334-0563 Cuba, MO Staten573/885-0500 Island, NY Owensboro, 718-4 718 448 4 8-24 2444 44 KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

Chadwick-Baross Chelmsford, MA 800-804-0775

COMPANY WRENCH www.companywrench.com Bangor, ME 4805 Scooby Lane NW 800-698-4838 Carroll, OH 43112 866-262-4181 4510 East 71st Caribou, MEStreet Cleveland, OH 44105 800-270-2547 440-439-4567 920 Deneen Avenue Westbrook, W estbrook, M ME Monroe, OH 45050 513-649-8105 800-262-5 800 262-5714 714

Concord, N H 603-224-4063

Edward Ehrbar Inc. Yonk o ers, NY 914-738-5100

Holbrook, NY 631-563-7600

For more information on Terex Fuchs material handlers, contact your local Terex Fuchs distributor or visit us at terex.com/construc ction

New Yo ork City, NY 718-626-3331 Danbury, CT 203-743-0088

Page 38 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mid Country Machinery

3478 5th Ave. S. • Fort Dodge, IA 50501 (515) 574-2302

4734 Sergeant Rd. • Waterloo, IA 50701 (800) 206-5936 (319) 234-8710 www.midcountrymachinery.com

2019 KOBELCO SK 140SR

2019 JOHN DEERE 317G

2018 HITACHI ZW80

2014 CAT D6N LGP

106 8th St. • Sergeant Bluff, IA 51054 (712) 943-4470 3509 Franklin St SW • Bondurant, IA 50035 (515) 410-9900

2018 CATERPILLAR 966M

2018 DEERE 700K LGP

EXCAVATORS

WHEEL LOADERS

DOZERS

2020 SANY SY500, *NEW* ..........................$CALL 2020 LBX 245X4, *NEW* ............................$CALL 2020 KOB SK350LC-10, *NEW* ....................$CALL 2020 KOB SK300LC, *NEW* ........................$CALL 2019 LBX 490X4, *NEW* ............................$CALL 2019 LBX 350X4, *NEW* ............................$CALL 2019 LBX 300X4, *NEW* ............................$CALL 2019 LBX 210X4, 5 UNITS *NEW* ..................$CALL 2019 LBX 160X4, 322 HRS ..........................$CALL 2019 LBX 145X4, 3 UNITS *NEW* ..................$CALL 2019 LBX 75X3, *NEW* ..............................$CALL 2019 KOB SK350LC-10, *NEW* ....................$CALL 2019 KOB SK270SR, *NEW* ........................$CALL 2019 KOB SK210LC, 4 UNITS *NEW* ..............$CALL 2019 KOB SK170LC-10, *NEW* ....................$CALL 2019 KOB SK85CS3-E, 3 UNIT*NEW* ..............$CALL 2019 SANY SY135, 2 UNITS *NEW* ................$CALL 2019 SANY SY95, 3 UNITS *NEW* ................$CALL 2018 KOB SK350LC-10, 2 UNITS ................$269,000 2018 KOB SK300LC-10, 898 HRS ..............$220,000 2018 KOB SK210LC-10, 2 UNITS ....................$CALL 2018 LBX 145X4DZ, 1203 HRS ......................$CALL 2017 KOB SK300LC-10, 757 HRS................$210,000 2017 SANY SY235CLR, 2457 HRS ..................$CALL 2016 LBX 350X4, 2091 HRS ....................$199,000 2016 LBX 300X4, 3342 HRS ........................$CALL 2016 LBX 210X3, 1141 HRS......................$130,000 2016 KOB SK350LC, 1700 HRS ..................$210,000 2016 KOB SK260LC, 852 HRS....................$180,000 2016 KOB SK85CS-3E, 726 HRS ..................$89,000 2016 SANY SY235CLR, 3133 HRS ..................$CALL 2015 CAT 326FL, 4280 HRS ......................$152,500 2015 KOB SK350LC, 2288 HRS ..................$190,000 2015 KOB SK210LC-9, 1092 HRS................$149,000 2014 DEERE 210GLC, 2806 HRS....................$CALL 2014 DOOSAN DX140LC, 2800 HRS ..............$68,500 2012 CAT 319DL, 3546 HRS ......................$115,000 2011 DEERE 200D, 6229 HRS........................$CALL 2009 KOB SK70SR, 5553 HRS ....................$32,500 2006 CASE CX210, 6155 HRS........................$CALL 2005 VOLVO EC460 ................................$38,500 2005 DEERE 160CLC, 5099 HRS....................$CALL 1996 HITACHI 200LC-2, 3524 HRS ..................$CALL 1996 HYUNDAI 210LC-3 ..............................$CALL

2020 HITACHI ZW80, 5 UNITS ......................$CALL 2019 DEERE 344L, 59 HRS ..........................$CALL 2018 HITACHI ZW180-6, 550 HRS ..............$165,000 2018 HITACHI ZW150-6, 287 HRS ..............$155,000 2018 CAT 966M, 1350 HRS ..........................$CALL 2018 CAT 926M, 2 UNITS ............................$CALL 2018 CAT 906M, 3 UNITS ............................$CALL 2017 CASE 521F, 235 HRS ..........................$CALL 2017 DEERE 624K, 453 HRS ........................$CALL 2015 KAWASAKI 67Z7, 988 HRS ................$120,000 2015 CAT 950M, 1146 HRS ..........................$CALL 2015 CAT 930K, 4547 HRS ..........................$CALL 2015 CAT 938M, 268 HRS ........................$182,500 2015 DEERE 544K, 2892 HRS........................$CALL 2014 CAT 938K ........................................$CALL 2014 DEERE 644K, 4470 HRS........................$CALL 2013 KAWASAKI 60ZV2, 3163 HRS ..............$62,500 2013 DEERE 524K, 5140 HRS........................$CALL 2000 DEERE 544H ....................................$CALL 1994 CAT 950F, 7527 HRS............................$CALL

2019 DEERE 700K, 234 HRS ........................$CALL 2019 DEERE 650K LGP, 243 HRS....................$CALL 2018 DEERE 700K, 641 HRS ........................$CALL 2018 CAT D6K2 LGP, 215 HRS ......................$CALL 2018 KOMATSU D51PX, 532 HRS ..................$CALL 2016 CAT D6K LGP, 5776 HRS ......................$CALL 2016 CAT D4K2 LGP, 2300 HRS ..................$95,000 2015 CAT D6K2, 2818 HRS ..........................$CALL 2014 CAT D6T XL, 2 UNITS ..........................$CALL 2014 CAT D6T LGP, 4 UNITS ........................$CALL 2014 CAT D6N LGP, 3193 HRS ......................$CALL 2013 CAT D6T XW, 3637 HRS........................$CALL 2013 CAT D6T LGP, 5030 HRS ......................$CALL 2013 DEERE 650K XLT, 2 UNITS ..................$59,000 2013 CAT D5K2 LGP, 3619 HRS ....................$CALL 2012 CAT D6T LGP, 6160 HRS ......................$CALL 2012 CAT D6T XW, 4897 HRS ....................$189,500 2012 CAT D6N XL, 3781 HRS ....................$149,000 2010 CAT D6K LGP, 3184 HRS ..................$115,000 2008 CAT D6T XW, 4732 HRS........................$CALL 2006 CAT D6R XL, 7434 HRS ....................$115,000 2001 CAT D6R XL,10544 HRS ....................$115,000

SKID LOADERS 2019 DEERE 333G, 5 UNITS..........................$CALL 2019 DEERE 331G, 150 HRS ........................$CALL 2019 DEERE 325G, 4 UNITS..........................$CALL 2019 DEERE 324G, 10 UNITS ........................$CALL 2019 DEERE 317G, 2 UNITS..........................$CALL 2018 CAT 289DXPS, 331 HRS ....................$75,000 2017 KUBOTA SLV75-2, 484 HRS ................$56,000 2016 CAT 262D, 1236 HRS ........................$39,000 2015 CAT 262D, 513 HRS ..........................$38,500 2014 CAT 287D, 1629 HRS ........................$42,500 2011 TAKEUCHI TL240, 2471 HRS ................$30,000 2011 BOBCAT S185, 3906 HRS ....................$19,000 2005 DEERE 325, 3600 HRS ......................$14,500

BACKHOES 2016 CAT 420F2, 2 UNITS ..........................$82,000 2016 DEERE 310SL, 1200 HRS ....................$93,500 2015 CAT 420F, 1941 HRS..........................$75,000 2014 DEERE 310SK, 2 UNITS ......................$58,500 2012 NH B95C, 1479 HRS ..........................$49,000 2004 DEERE 310SG, 5772 HRS....................$26,000 1980 DEERE 302A, 6781 HRS........................$CALL

MINI EXCAVATORS 2019 KOB SK55SRX-6E, 6 UNITS....................$CALL 2019 KOB SK45SRX-6E, 2 UNITS....................$CALL 2019 SANY SY60, 5 UNITS ..........................$CALL 2019 SANY SY35, 4 UNITS ..........................$CALL 2018 SANY SY50, 311 HRS ........................$47,500 2018 SANY SY35U, 115 HRS ......................$37,000 2018 LBX 75X3, 1113 HRS ........................$85,000 2018 KOB SK75SR-3E, 3 UNITS ..................$99,000 2018 KOB SK55SRX-6E, 294 HRS ................$63,500 2018 KOB SK35SR-6E, 2 UNITS ..................$45,000 2017 KOB SK55SRX ..................................$CALL 2017 KOB SK30SR, 208 HRS ......................$33,000 2017 KOB SK17SR, 408 HRS ......................$26,000 2017 SANY SY35U, 90 HRS ........................$39,000 2016 CASE 55CXB, 882 HRS ........................$CALL 2015 KOB SK35SR, 119 HRS ......................$41,000 2014 KOB SK17SR, 555 HRS ......................$24,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 39

Just Launched: Our New Partner Program with special Retail, Rental & Leasing offers! Visit LiuGongNA.coom/partnerprogram

WE’RE WE’ RE DIGG GING DEEEP TO FIIND THE BEST DE EALERS S IN THE U.S. For over 60 yeaars, LiuGong has manufactureed extreme-duty construction equipment and offers a full line of Tier 4 Final machines, ranging from excavators, wheeel loaders and dozers to skidd steers and compact tr track loaders. aders. Our Forklift division offers fers a complete lineup of material terial handling equipment, withh a long list of options that are ar raising expectations. LiuGoong CE machines are made from the best componentry componentr inn the world— w ® ® ® ® Cummins , ZF and a Kawasaki — and are prooven in terrain around the world to be rugged and reliable.. Our Dressta dozers are 1 off only 5 dozer b d sold brands ld in i the th U.S., U S giving i i you an advant d tage with ith fleet fl t customers. t S take So t k action ti now to t join j i a dea d alership l hi program that th t makes k our machines hi easy to stock, easy to sell and simple to serrvice. We require a low initial investment, and our machinees come fully configured and value-priced. Learn about our all-new Partner Program, witth special Retail, Rental and Leasing offers to support our dealer ealer partners in today’s challenging c times.

LiuGong is one of the fastest grrowing owing equipment companies nies in the world. Our dealer network k is rapidly expanding in U.S. markets, and a we arre e inviting a select gr group ou up p of dealers to come g grrow ow with us in these th hese arreas: eas: EL PASO, PASO TX • FRESNO, FRESNO CA • NEW ORLEANS, ORLEANS LA • AT LANTA, LANTA GA • MIAMI, FL • JACKSONVILLE, JACKSONVILLE FL TAMPA, FL • TAL LAHASSEE, FL • OKLAHOMA CITY, OK • NASHVILLE, TN • AND MORE!

Visit LiuGongNA.com/ Dealer

Page 40 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CUSTOM MADE PRODUCTS Scrapers, Rollers & Graders

For Sale & Rent SIXTEEN LOCATIONS IN IOWA, NEBRASKA, & WISCONSIN

CALL ANYTIME 24/7

515-332-1875 Visit our website @ www.gncmp.com

MO ORE TH HAN |

0% 48 FOR

SKID DS & TRRACKS Offer expires 06.30.20

MONTHS

CONTTACT ACT YOUR LOCAL M MUSTTAN ANG BY MANITOU DEALEER TODA AY! Y!

STAR EQUIPMENT LT D .

www.STAREQUIP.com 2950 6TH STREET Sw 1401 2nd AvEnUE dES moInES, IA 50314 cEdAR RAPIdS, IA 52404 (515) 283-2215 (319) 365-5139 (800) 369-2215 (800) 728-5139 2625 w. AIRlInE Hwy. wATERloo, IA 50703 (319) 236-6830 (800) 791-9249

2100 E. lIncoln wAy AmES, IA 50010 (515) 233-9500 (866) 856-2312

YOUR Y OUR S ST TABLE ABLE

WORKHORSE

75th Great Lakes Logging, Equipment Expo Set for Sept. The 75th Annual Great Lakes Logging and Heavy Equipment Expo is set for Sept. 10 to 12, 2020, at the Upper Peninsula State Fairgrounds in Escanabe, Mich. The event is co-sponsored by the Great Lakes Timber Professionals Association (GLTPA) and Fabick CAT. The Great Lakes Logging and Heavy Equipment Expo is a three-day expo that takes place throughout the Lake States region of the United States. More than 200 indoor and outdoor exhibitors attend each year to showcase the best of the best when it comes to log splitters, portable sawmills, compact tractors and logging equipment, chainsaw carving, wood/pellet stove dealers and more. This year’s event kicks off with a live band and fireworks display. Other sponsors include: • Roland Machinery / Komatsu Forest • Ponsse • Forest / Loggers / Mauck • Scandinavian Forestry Equipment • McCoy Construction & Forestry • Crosstrac • Mid-States Equipment • Menominee Industrial Supply • Woodland Equipment • Compeer Financial / GreenStone / AgDirect • Laona Machine Supply • Farm Bureau • Wallingfords For more information, email Jennie at jbaker@gltpa.org, call 715/282-7979 or visit gltpa.org.  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 41

IN YOU OUR WORLD,

IT PAYS YS TO GO THE EX XTRA MILE. Combining seriouss productivity with a redesignned cab and controls, John Deeere 744L, 824L, and 84 44L Loaders give you the muscle you need to work comfortably all day long. The L--Series boasts increased horseepower, ergonomic programm mable controls, and reimaagined electrical and hydraulicc routing. Plus, they’re built ro ock solid with rugged gg D Deere diesels and high-capaci g p ity, y heavy-duty y y axles, so yyou have h the performance, reliability, and comfort to Run Y Your ouur World. W Stop by or call us today.

mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677

Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160

Page 42 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650

1st Choice Equipment LLC www.1stchoiceequipment.com 1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802

Lano Equipment, Inc. www.lanoequip.com Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310 Corcoran, MN 888/479-4342 763/479-8200

ABC Equipment Rental & Sales

Southeastern Equipment Co., Inc.

www.abcequipment.com

www.southeasternequip.com

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868

38525 Chester Rd. Avon, OH 44011 440/934-7368

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 43

Kirby-Smith Machinery Inc. www.kirby-smith.com 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 4617 Powell Street McAlester, OK 74501 918/310-1550 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300

Relia ability, value and industry-leading performance are yours with h our complete portfolio of mobile telescopic crane es. Grov ve products are available in: Alll-terrain models with capacities from 50 t (55 USt) to 450 t (550 USt) Ro ough-terrain models with capacities from 30 t (30 USt) to 150 50 t (165 USt) Tru uck-mounted models with capacities from 36.3 t (40 USt) to o 100 t (115 USt) Telescoping crawler models with capacities from 30 t (30 USt) t) to 127 t (140 USt) Ind dustrial models with capacities from 8.1 t (9 USt) to 22 t (25 USt)

Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757

www.manitowoc.com m

Page 44 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cranes Pick, Hold on Site of Conveyor Bridge Demolition in Chicago Area KENTUCKY DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green 270-781-1061

OHIO CAT www.OhioCAT.com Richwood 888-446-4658

WILSON EQUIPMENT COMPANY

The higher-capacity LTM 1450 was responsible for lifting the end of the bridge that would eventually be cut into a single 129-ft. section, the longer of the two pieces. The LTM 1200 would handle the second section, to be 65 ft. long after cutting.

To upgrade the processing line at a Chicago-area metalshandling plant, a truss bridge supporting a conveyor needed to be removed to make way for its eventual replacement. The conveyor feeds a kiln where material is heated to remove impurities. Brandenburg Industrial Services was in charge of demolition, contracting with Dearborn Engineers & Constructors to perform site analysis and Central Contractors Service, a member of the ALL Family of Companies, to provide cranes for the bridge removal. Central specified two cranes for the work, a 550-ton Liebherr LTM 1450-8.1 and a 220-ton Liebherr LTM 12005.1. Dearborn identified placement for the cranes, with the LTM-1450 positioned at the north end of the bridge to be removed and the LTM 1200 placed at the south end. Because of the bridge’s location and anchoring, project leaders determined that the cranes would need to support the full weight of the bridge first, hold it as it was cut free from its anchor points, and then suspend it in air as it was cut into two pieces before finally being set on the ground. “The bridge was supported at three points,” said Mike Walsh, president of Dearborn Engineers & Constructors. “So without this approach, no matter where we cut it first, something was going to float.” The higher-capacity LTM 1450 was responsible for lifting the end of the bridge that would eventually be cut into a single 129-ft. section, the longer of the two pieces. The LTM 1200 would handle the second section, to be 65 ft. long after cutting. “To prevent shock load, both cranes were preloaded prior to the bridge being cut free from its anchor points,” said Walsh. “Central’s operators carefully cranked the drums and ran enough wire to increase tension to the rigging so it was equivalent to the pounds that would soon be loaded.” After the bridge was cut free from its supports, both cranes held the piece in place as ironworkers went to work cutting the span into two sections. In all, they held it aloft for two hours. After bisecting for the shorter 65-ft. section on the south end, the LTM 1200 drifted, turned the nose to the west, and set the piece on the ground. The longer 129-ft. northern section was slightly more complicated. The LTM 1450 had to

www.wilsonequipment.com Lexington (Corporate Headquarters) 859-254-6443 Corbin 606-528-0700 Prestonsburg 606-874-8036

MINNESOTA ZIEGLER CAT

Because of the bridge’s location and anchoring, project leaders determined that the cranes would need to support the full weight of the bridge first, hold it as it was cut free from its anchor points, and then suspend it in air as it was cut into two pieces before finally being set on the ground.

drive northeast, rotate the section, drift it, and set it on the ground east of the crane. “As is common on the grounds of working industrial plants, crane operators have to be aware of the elevations of surrounding structures and silos,” said Walsh. “It requires a steady hand at the helm. All the operators from Central are as steady as neurosurgeons.” Walsh also noted that operators performed the work while the plant’s second line remained in full operation. Why was the bridge cut into unequal sections? It had to do with the location of a bridge bend. It was the natural point at which to cut the bridge into sections, and it was located 65 ft. from the southern end and 129 ft. from the northern end. After Central’s cranes set the sections on the ground, teams of ironworkers further dismantled them into smaller pieces that would be trucked away from the site. For more information, call 800/232-4100 or visit www.allcrane.com. 

www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

OHIO OHIO CAT www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)

WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 45

ILLINOIS DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon 618-242-2273

DIAMOND EQUIPMENT

INDIANA MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store)

Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store)

South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700

Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

www.diamondequipment.com Evansville 812-425-4428

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819

Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

Page 46 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mouse River Project to Alleviate Future Flooding Issues RIVER from page 1

According to Dusty Zimmerman, who serves as the public information coordinator of the Souris River Joint Board, which sponsors the project, it is currently valued at $1 billion. “Project planning began in 2011 and we anticipated the project would take 20-25 years to complete,” he said. “To date, there has been no federal funding for the project, only state and local funding. This project also includes elements to address flooding issues in rural areas.” Zimmerman explained that the project is broken into a number of phases. Several have not been designed further than the Preliminary Engineering Report (PER). The first three phases are currently under construction, and he noted that each has unique characteristics. The first phase of the MREFPP included the development of a plan to reduce flood risk in the river valley from Burlington to Velva and Mouse River Park, presented in the PER. This report describes in detail proposed improvements along the Mouse River to reduce flood risk in areas that are primarily developed or urban in nature. Once the PER was mostly developed, the focus was on the rural areas of the Mouse River valley. This included basin-wide evaluations of erosion, sedimentation, hydraulics and hydrology to enable the assessment of the basin-wide implication of improvements proposed in the valley. An evaluation also was made of 12 different alternatives for reducing flood risk for the rural reaches of the basin. Next, the focus of the MREFPP shifted toward implementation. Phase BU-1A was substantially complete in November 2019 under prime contractor Swingen Construction. This phase, as well as several others, includes the replacement of a bridge to increase conveyance through the area. The Colton Avenue Bridge Replacement began in May of 2019. “On phase BU-1A, a minimum of two cranes, pile driving equipment, numerous excavators and loaders, and concrete pump trucks were working alongside each other in a confined space,” Zimmerman

The Mouse River Enhanced Flood Protection Project is a continuing project in North Dakota that is designed to reduce the risk of future flooding throughout the entire Mouse River Basin.

said. “A major subcontractor was Bluestone and they completed the earthwork and rip rap.” This phase included an observation trench and levee work. The second phase, BU-1, includes an earthen levee system around the city of Burlington.

The Phase MI-1 contractor is Park Construction, with Brandon Larson serving as project manager. Zimmerman noted that this phase is primarily made up of floodwalls and a significantly sized pump station. Construction began in 2018. “With light snow this past win-

ter, contractors were able to access the work areas easily and continued pushing toward completing the nearly 2,000 linear feet of floodwalls just north of the Mouse River,” the most recent winter update stated. “Crews poured floodwall footings and vertical

Phases MI-2 and MI-3 are being completed by Wagner Construction, with Matt Guerton as the project manager. These two phases are primarily earthen levees. Construction began in 2018.

portions of the walls, as temperatures allowed.” Crews also focused on building the above grade portion of one of the largest pump stations in the state. The projected finish date for the overall project remains the spring of 2021. Phases MI-2 and MI-3 are being completed by Wagner Construction, with Matt Guerton as the project manager. According to Zimmerman, these two phases are primarily earthen levees. Construction began in 2018. Zimmerman reported that on phases MI-2 and MI-3, the levee fill is 500,000 cu. yds. and there were 75,000 tons of aggregate and rip rap used. These phases utilized boring equipment to channel under the river. “The Phases MI-2 and MI-3 major subcontractor was Rice Lake Construction Group and they completed the pump station and gatewells,” Zimmerman said. “Wagner Construction has begun to excavate for the slope stabilization on the south side of the Mouse River, immediately west of the city of Minot’s Water Treatment Plant [WTP],” the report stated. “The existing slope see RIVER page 56

SECTION

Attachment & Parts Pages 47-51

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Blackhawk Mulcher Head Knifes Through Vegetation

Designed specifically as a knife tool mulcher, every aspect of the Blackhawk, including rotor diameter and size, ratio of knives to rotor, cutting chamber, even the hydraulic lines, contribute to maximize its production capacity.

This optimized rotor can aggressively shred standing vegetation as well as process materials already on the ground.

Feconâ€™s Blackhawk knife-tool mulching head quickly and efficiently shreds standing vegetation and processes material on the ground. Designed specifically as a knife tool mulcher, every aspect of the Blackhawk, including rotor diameter and size, ratio of knives to rotor, cutting chamber, even the hydraulic lines, contribute to maximize its production capacity. Ideal for skid steer and compact tracked loaders with hydraulic flows of 27 to 45gpm, this new mulcher features 30 knife tools and has a 76 in. cutting width. It is an excellent tool for clearing brush and vegetation, shredding material in woodland urban interface zones, clearing rights-of-way, lot clearing and clean-up, site preparation, and more, according to the manufacturer. This optimized rotor can aggressively shred standing vegetation as well as process materials already on the ground. The ability to process already felled materials creates a more aesthetically appealing end-product and eliminates partially processed material being left behind. Because the Blackhawk efficiently channels material through its cutting cycle, there is minimal draw on the engine, resulting in significantly improved fuel efficiency. Should a rotor stall occur, the unit will immediately recover when extricated from

mulcher. Elimination of 90-degree bends reduces heat buildup in the hydraulic fluid, which allows longer run times and longer service of hydraulic components. Each Blackhawk mulcher can be fine-tuned to the specific hydraulic output of its carrier. Adjusting hydraulic displacement of the motor to match hydraulic flow supplied

the stall-causing material and be ready to reengage. Most of the finely chipped material is broadcast forward of the rotor to minimize the re-processing of already shredded material, further enhancing its efficiency and effectiveness, according to the manufacturer. Hydraulic lines have been completely redesigned for better flow through the

boosts the rotor performance and efficiency. Bolt-in wear parts enhance the economy of the Blackhawk. Rugged construction includes 5/16 in. thick HS steel cutting chamber with AR steel replaceable wear parts. For more information, call 513/696-4430 or visit www.Fecon.com. ď‚§

Hydraulic lines have been completely redesigned for better flow through the mulcher. Elimination of 90-degree bends reduces heat buildup in the hydraulic fluid, which allows longer run times and longer service of hydraulic components.

Page 48 • May 30, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

BladeCore Announces NiCore Bobcat’s Small Artic Loader Premium Shear Blade Series Bucket Offers Durable Design BladeCore, a supplier of mobile shear and stationary shear blades, introduced its new NiCore premium blade series. Made from high-alloy material with a 4 percent nickel content, these blades are

more than 90 percent concluded that they preferred blades comprised of this material because of the additional output of processed scrap. “We used to go through two or more blade kits a year and we’re down to one now, which is huge. The additional savings from less down time is also great for us,” a Pennsylvania customer said. NiCore blades currently are available through BladeCore for Fortress, Genesis and LaBounty shears as well as many other types of stationary shears. Jay McDevitt, BladeCore division manager, said, “We’ve never seen blade life like this on NiCore blades currently are available through a blade before. These NiCore BladeCore for Fortress, Genesis and LaBounty shears as well as many other types of stationary blades will redefine life expectations in the scrap metal and shears. demo industries.” yielding an average of 60 to 80 percent BladeCore, a division of Exodus longer per edge than a standard blade, Machines, offers replacement blades for according to the manufacturer. mobile and stationary shears as well as direct During a trial with almost 75 customers, sales and service support. 

Bobcat Company is widening its attachment offerings with the introduction of the new small articulated loader utility bucket. The Bobcat small articulated loader utility bucket is ideal for standard duty grading and leveling. Also, its material handling helps minimize workload and complete projects quickly and efficiently, according to the manufacturer. The new small articulated loader utility bucket has pre-drilled holes to accommodate ease of installation for many of Bobcat’s bucket accessories and enhanced visibility to the cutting edge through the see-through back design. Compatible with the Bob-Tach interface, the utility bucket also features an upper flat surface edge, which functions as a level indicator to show when the bucket is level during operation. In addition, the new utility bucket has a skid bar design that provides additional

strength and wear protection to the bottom of the bucket. The small articulated loader utility bucket also has no interior bucket brace. This allows for easier debris clean out. For more information, visit Bobcat.com. 

The new small articulated loader utility bucket has pre-drilled holes to accommodate ease of installation for many of Bobcat’s bucket accessories and enhanced visibility to the cutting edge through the see-through back design.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 30, 2020 • Page 49

BR RING SA AFETY, INNOVA I VATION T & DURABILITY Y TO YOUR O JOB B SITE ESCO loader buckets are precision engineered and d feature the Ultralok® too oth system that provides safer and easier tooth replacement. ment. Combined with premium mium materials and skilled d fabrication, ESCO delivers vers one of the most durable, high-performance gh-performance buckets available.

Ultralok® Tooth o System y

ESCO Manganese Crusher Wear e r Parts

General Equipment & Supplies, Inc.

Howell Tractor and Equipment, LLC

www.genequip.com

www.howelltractor.com

4300 Main Avenue • Fargo, ND 58103 800-437-2924

480 Blaine Street • Gary, IN 46406 800-852-8816 2770 May Road • Peru, IL 61354 815-224-3003

www.esco.weir .

Copyrig ght ©, WEIR and the WEIR Logo are trademarks demarks and/or registered trademarks off We eir Engineering Services Ltd.

Page 50 • May 30, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 30, 2020 • Page 51

Cat Pin Grabber Couplers Boost Productivity, Safety

Excavators of similar sizes can share attachments and with the addition of the VB and HB sizes of pin grabber couplers, there is now a coupler for every size of excavator from the 311 – 390.

Cat pin grabber couplers bring a new level of bucket’s teeth compact, to maximize the productivity allowing the operator to change amount of digging power you have with the tools in a matter of seconds rather than minutes. addition of the coupler. The coupler frame’s Excavators of similar sizes can share attach- cast pieces are made from abrasion-resistant ments and with the steel to maintain the addition of the VB and coupler’s durability HB sizes of pin grabber over time. couplers, there is now a The coupler has coupler for every size of visual and audible cues excavator from the 311 for the operator to indi– 390. cate it is secure to the VB and HB refer to attachment. The prilinkage sizes. mary greasing block is Caterpillar classifies the central greasing excavator fronts accordpoint for the whole ing to the “linkage famcoupler and is easily ily,” which is the size at accessible at ground the end of the stick. Pin Pin grabber couplers feature a redun- level. Operating procegrabber couplers are dant locking system, ensuring attach- dures for the pin grabweighted to handle big ments are secure to the coupler. bers are intuitive and payloads when added to simple to learn for a machine and bucket combination, without operators of all experience levels. having to compromise on the bucket size. Adding the versatility of a pin grabber couPin grabber couplers feature a redundant pler allows the operator to switch from digging, locking system, ensuring attachments are grading, material handling, compacting soil, secure to the coupler. The spring-loaded arms breaking rocks, and more with ease. Using the keep the latch closed, even in the event of a pin grabber coupler also gives operators the hydraulic pressure loss. The shorter profile of ability to pick a bucket up in reverse position to the coupler helps keep the distance from the clean out square corners. end of the machine’s stick to the tip of the For more information, visit www.cat.com. 

Page 52 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

States Access Widespread Damage in Midwest Following Record Rainfall BRANDEIS MACHINERY & SUPPLY COMPANY

FLOOD from page 1

“We have in our region a minimum of 23 bridges impacted,” said Jocelyn Hall, spokeswoman of MDOT. “The biggest issue is making sure we can reopen some of those bridges. Some are a complete loss. All of the pavement was washed away or the entire bridge collapsed. Those were not large bridges. One was a causeway that leads to a marina and it has pretty significant damage to the infrastructure.” Other bridges appear to be undamaged, but inspectors will look beneath the water to check for scour — erosion that occurs at the footings and can cause destabilization. The approach to one bridge — newly reconstructed only a year ago at a cost of $23 million — was under water, but crews were able to get it opened in near record time. “That’s a huge success,” Hall said. “We had so many bridges closed there really wasn’t a way to detour people around. We’re talking probably 50 to 60 miles. That’s not a detour.” A section of U.S. 10 saw “huge chunks of roadway washed away,” necessitating the closure of about one mile. MDOT issued an emergency inspection contract to Great Lakes Engineers and was planning to meet to discuss emergency repair contracts. “Obviously, our own crews have been out assessing damage,” Hall said. “There are a number of different means we’ll use. Some will be with our own forces, some we will contract out for inspection. We do have some pretty cool pieces of equipment. We call them Emily Boats. These are little motorized boats that have sonar devices that help to take video recordings beneath the surface of the water. They are ideal when you have flooding situations. We can’t use them in place of underwater inspection, but if you have a flooding event and want to be sure the bridge isn’t going to wash away, it’s an option we can use.” As catastrophic as the damage is, Hall said the state is thankful there were no fatalities. “That’s pretty phenomenal,” she said. “You have a dam fail and you don’t have a lot of time to warn people. First responders were really efficient at getting the word out.” The failed dams, Sanford and

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

Matthew Bruning/Ohio Department of Transportation photo

In Ohio, the worst damage occurred on eastbound U.S. 30 in the city of Sandusky when flood waters washed out a culvert, forcing the closure of the road.

Edenville, are owned by Boyce Hydro Power. Amidst reports that the dams had exceeded their life expectancy, Whitmer announced her intentions to further investigate the failures. In a statement issued to the press, Boyce said the management and employees are “deeply distressed” by the dam failures. “In anticipation of what was predicted to be a major storm system, Boyce Hydro’s operators began lowering the water levels in the impoundments behind the Secord, Smallwood, Edenville and Sanford dams on May 15,” the statement said. “Despite their round-the-clock efforts, the massive volume of rainfall in the drainage basins of the Tobacco and Tittabawassee rivers, over an extended period of time, resulted in increasing water levels in the Wixom reservoir, to two feet below the dam crest. This, combined with wave action due to high winds, eventually caused the water to penetrate the earthen dike at the east end, saturating it. This resulted in a washout of approximately 900 feet of the dam on the evening of May 19, sending large volumes of water downstream toward the Sanford dam. This volume was more than Sanford dam was capable of handling, and it was ultimately overtopped, again sending large volumes of water downstream.” The statement also indicated that Boyce has spent hundreds of thousands of dollars on engineering solutions and construction plans conforming to FERC requirements for passing 100 percent of the Probable Maximum

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

GENERAL EQUIPMENT & SUPPLIES, INC. Matthew Bruning/Ohio Department of Transportation photo

In Chicago, emergency repairs were necessary on Chicago Street between Patterson Road and Doris Avenue in Joliet.

Flood (PMF), calculated to occur once in every 1,000,000 years. Other Midwest states also saw flood damage. In Ohio, the worst damage occurred on eastbound U.S. 30 in the city of Sandusky when flood waters washed out a culvert, forcing the closure of the road. “Everything underneath the pavement is gone,” said Matt Bruning, spokesman of the Ohio Department of Transportation. “We’re having to cut that section out and redo it.” The emergency contract for the repair went to Kokosing Construction Company. I-71 also was closed for several hours due to flood waters and debris. In Chicago, emergency repairs were necessary on Chicago Street (U.S. 52/Illinois 53) between Patterson Road and Doris Avenue in Joliet. The work included patching, milling, resurfacing and pavement striping. Chicago Avenue was closed as a result of heavy rains and flooding damage. The eastbound I-80 exit ramp to southbound Chicago Street was also closed.  CEG

DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000

www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 53

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 East Moline, IL 309-755-7203 800-633-9114

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

“WE’RE NOT A BIG COM MPANY A , BUT KOM MATTSU TREA ATTS US L LIKE WE AREE.” BETTER SUPPORT UPPORT. “My cousin Thomas and I started our construction company on a wing and a prayerr. We couldn’t have done one it without the financing, training, ning, tech assistance and support ort we received from Komatsu and our ur distributor. The products are top quality. They make us efficient ent at our job, and feel connected—like e they want to be our partner in this. That’s why Komatsu workss for us!”

Brian (left) and Thomas homas Cronin / Prosperity Construction onstruction / Jackson, MS

That t’s s why y I am Komatsu t u komaatsuamerica.com

Page 54 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Roland Machinery Co.

Central Power Systems & Services

www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474

Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151

Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920

www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Great Bend, KS (816) 781-8070 (620) 792-1361 ALP Air, Light, Power Liberal, KS Liberty, MO (620) 624-7274 (816) 415-6700 Salina, KS Joplin, MO (785) 825-8291 (417) 726-5373 Wichita, KS Maryland Heights, MO (316) 789-7370 (314) 427-4911 Woodward, OK Springfield, MO (580) 256-6014 (417) 865-0505 Yukon, OK (405) 324-2330

MAKE POWER MOVES.

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 55

Howell Tractor www.howelltractor.com 480 Blaine Street • Gary, IN 46406 219/810-6327

Construction Machinery Company Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900

www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 2235 Ragu Drive • Owensboro, 42303 Dealer Im mprintKYAr ea 270/683-2000 • 877/683-2262 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661

Kelbe Brothers Equipment Co., Inc.

Kirby-Smith Machinery, Inc.

www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151

www.kirby-smith.com 8320 Ruby Avenue • Kansas City, KS 66111 913/850-6300

4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 3101 French Rd. • DePere, WI 54115 920/343-6496

Page 56 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rip Rap Replacement, New Water Main Part of Mouse River Basin Project KOBELCO-USA.COM

RIVER from page 46

will be excavated from near vertical to a 2:1 and will include rip rap and turf reinforced mat [TRM] to protect the riverbank and adjacent properties from future erosion.” Installation of a 30-in. raw water main also continues. This delivers raw water to the WTP from the Minot Aquifer through groundwater wells located throughout the valley. It was reported that Wagner has installed a majority of the main line pipe with pressure testing and connections to the existing watermain remaining. “This work was scheduled for the winter months during which water demand is decreased in order to diminish effects on water supply as well as allow more time to make the final connections,” the report stated. On the schedule for this spring are installation of the remaining portion of the NAWS 36-in. watermain; removal of existing utilities beneath the proposed levee footprint immediately west of 16th Street; and the completion of the remaining 300 ft. of levee. Rip rap placement near and beneath the 16th Street bridge will be completed as river conditions and weather allow. A new parking lot will be completed, as well as restoration and various finishes, including seeding, landscaping, tree planting, concrete and asphalt paths, park benches and site lighting. This project is scheduled to be finished by summer’s end. Phase MI-4 is currently in the design phase and MI-5 is currently being redesigned. Construction is expected soon on both of these phases. The Burlington project has been broken into two phases. Phase WC-1 Tierrecita Vallejo has been designed and is awaiting final arrangements, permitting and bidding. Construction is expected to start this year. The Sawyer, Velva and Mouse River Park bridge replacement projects are currently being designed. The STARR Program for rural property owners was implemented in 2016 and has been substantially completed. This was reportedly developed by the Souris River Joint Board as a potential solution to address continuous flooding challenges for private landowners throughout the rural areas of the Mouse

Mid Country Machinery

Southeastern Equipment Co., Inc.

3478 5th Ave S Fort Dodge, IA 50501 800-206-5936

Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303

4734 Sergeant Road Waterloo, IA 50701 319-234-8710

1356 3rd Street Brilliant, OH 43913 740-598-3400

106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

1500 Industrial Parkway Brunswick, OH 44212 330-225-6511 6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910

Miller-Bradford & Risberg, Inc. “On phase BU-1A, a minimum of two cranes, pile driving equipment, numerous excavators and loaders, and concrete pump trucks were working alongside each other in a confined space,” said Dusty Zimmerman, public information coordinator of the Souris River Joint Board.

River Basin. There were options for landowners to receive assistance through funding from the North Dakota State Water Commission, city of Minot sales tax collections directed at flood protection, and a local share of 5 percent, for the purpose of structure acquisition and demolition, structure relocation, or the ring diking of property. The North Dakota State Water Commission and U.S. Army Corps of Engineers Silver Jackets Programs also were named as project partners. It was reported that the program has assisted 35 property owners within Renville, Ward and McHenry counties. One ring dike is currently in design and expected to be constructed this year. Three participants were involved in structure relocations, including one home. A total of 166 structures were acquired with 135 of those demolished and 17 resold. The program is currently not available due to a lack of additional funding. The Flood According to the project website, on June 25, 2011, the Mouse River flowed under Minot’s Broadway Bridge at a record rate of 27,400 cu. ft. per second — more than five times the rate that existing channels and levees had been designed for.

For weeks, water levels were too high for passenger and emergency vehicles to safely cross numerous area bridges. After flood waters receded, many bridges remained out of service for months while damages were assessed and repaired. The website states that the recordbreaking flow overwhelmed most flood fighting efforts along the entire reach of the Mouse River, causing extensive damages to homes, businesses, public facilities, infrastructure, farms and ranches. According to the U.S. Army Corps of Engineers (USACE), 4,700 residential, commercial and public structures in Renville, Ward and McHenry counties sustained building and content damages totaling more than $690 million. If emergency flood fighting measures had not been implemented, structure damages would have totaled roughly $900 million. Infrastructure damages totaled hundreds of millions of dollars in the city of Minot alone. The rural reaches of the Mouse River Valley in North Dakota have reportedly endured frequent flood damages over the past two decades. Impacts from flooding in the rural areas include crop and hay losses, damage to structures, impacts to livestock and loss of commerce due to inundated roads and bridges.  CEG

W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479

DeForest, WI 608-222-9191

8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Eau Claire, WI 715-832-3443

404 Breaden Rd. Monroe, OH 45050 513-539-9214

De Pere, WI 920-338-5800 Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 57

Blue Ridge Tractor

Illinois Truck & Equipment Co.

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Trucks & Trailers

SECTION

Pages 58-63

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Each IV stand was carefully handcrafted, taking into consideration how these stands are used in the emergency room.

Towmaster Pivots to Create Equipment for Local Hospital The rise of the COVID-19 pandemic has left hospitals around the country in dire need of lifesaving supplies. In Litchfield, Minn., the Meeker Memorial Hospital was facing a serious shortage of emergency supplies, including IV stands, due to the projected influx of COVID-19 patients. The hospital requested assistance from the community and local businesses to help address supply shortages. Towmaster heard their call and without hesitation agreed to pivot some of its operations to manufacture IV stands.

The Towmaster team was able to apply its knowledge of steel fabrication and engineering expertise to quickly design and manufacture 50 metal IV stands and deliver them to the hospital within a matter of days. Each IV stand was carefully handcrafted, taking into consideration how these stands are used in the emergency room. In accordance with the mission of Monroe Truck Equipment and Towmaster, the team stepped up and filled a desperate need. Monroe Towmaster is dedicated to Moving

In Litchfield, Minn., the Meeker Memorial Hospital was facing a serious shortage of emergency supplies, including IV stands, due to the projected influx of COVID-19 patients.

Communities Forward. In normal circumstances this mission applies to the safe and reliable municipal truck equipment and trailers that Towmaster designs, manufactures, installs, and distributes. In this instance, the Towmaster team was able to quite literally keep the community safe by applying their expertise where it was needed most. This act is an extension of the companyâ€™s core values, and a way to give back to the incredibly hardworking medical professionals and protect the wellbeing of its community members. ď‚§

Towmaster pivoted some of its operations to manufacture IV stands.

Construction Equipment Guide â€˘ Trucks & Trailers Section â€˘ www.constructionequipmentguide.com â€˘ May 30, 2020 â€˘ Page 59

Â Â? Â? Â? Â? Â?

Â Â

Â Â Â€

Â€ Â€

Â?

Â‚

Â? Â? Â? Â? Â? Â? Â? Â Â

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800 Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 Marne 1064 Franklin Street Marne, MI 49435 616-371-7250 www.McCannOnline.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 www.diamondequipment.com

Ziegler CAT 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Alta Equipment Company Bryon Center, MI 616-878-7450 New Hudson, MI 248-356-5200 Traverse City, MI 231-714-6210 Detroit, MI 313-394-1811 Flint (Burton), MI 810-744-4840 Gaylord, MI 989-731-9988 Sterling Heights, MI 568-474-5063 Bloomington, IL 309-585-3800 Spring Grove, IL 708-547-7300 Ottawa, IL 815-313-2070 www.altaequipment.com

Â? Â? Â? Â? Â Â?

Page 60 • May 30, 2020 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Wallwork Truck Center has 26 New & Arriving 2019 & 2020 Ford F450 & F550 Trucks

2020 Ford F450 XLT

Dually Pickup 6.7 Powerstroke Diesel, 450 HP, 10 Spd Auto Trans., Rapid Red, Stk# L8228S

2-2020 Ford F550 Super Cab XLT’s

6.7 Powerstroke Diesel, 10 Spd Auto Trans, Mechanics Body, 1 IMT Dominator 7,500# Crane, 1 Knapheide KMT 11-1 7,500# Crane, White

2020 Ford F550 4x4 XL

4x4 Crew Cabs, 203” WB, 6.7 Powerstroke Diesel, 6 Spd Auto. White. Stk# K8171S, K8146C, K8135C, K8155C, K8185S

4x4 Crew Cab, 6.7 Powerstroke Diesel, 6 Spd Auto Trans., 11’6” Knapheide PGNB Flatbeds, Stk# K8209S, K8210S

2020 Ford F550 XL 4x4

5-2019 Ford F550 XL

2-2019 Ford F550 XLT

FARGO, ND • 701-476-7495

Reg Cab, 7.3 V-8 Gas, 350 HP, 10 Spd Auto Trans, 11’ Rugby Contractor Body & Elec Hoist, White, Stk# L8207S

7.3 V-8 Gas, 350 HP, 10 Spd Auto Trans., 84” C to A, White, Stk# L8205S

WWW.WALLWORKTRUCKS.COM

Kenworth T880S Adds Set-Forward Fixed Grille Option The Kenworth T880S with set-forward front axle has added a new fixed grille option. A radiator-mounted grille is now available for the T880S equipped with the 114-in. BBC short hood. The new option allows the hood to be opened in applications where equipment is mounted to the front of the T880S. “The fixed grille is an excellent option for truck operators who use the Kenworth T880S as snowplows, cranes, vacuum trucks or other applications that require equipment mounted in front of the hood,” said Laura Bloch, Kenworth assistant general manager of sales and marketing. The T880S is offered with a set-forward front axle ranging from 14,600 to 22,800 lbs. and is standard with the PACCAR MX-13 engine with up to 510 hp and 1,850 lb-ft of torque. For weight-sensitive applications, the 10.8-L PACCAR MX-11 engine is 400 lbs. lighter than larger displacement engines and provides up to 430 hp and 1,650 lb-ft of torque. The Kenworth T880S offers low operating cost, excellent performance and productivity, and outstanding driver comfort. For more information, visit www.kenworth.com. 

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 30, 2020 • Page 61

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

www.jeffbelzerchevy.com

JARRET PETSCH 952-469-7063 JPETSCH@JEFFBELZER.COM Lakeville, MN 55044

JOHN ZADURSKI 952-469-6818 JZADURSKI@JEFFBELZER.COM Lakeville, MN 55044

OFFERS

Page 62 • May 30, 2020 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Mack Trucks Parts Availability Remains Strong During COVID-19 Situation As the trucking industry rises to meet the critical needs of society during the unprecedented COVID-19 situation, Mack Trucks continues to support its customers and dealers with strong parts availability. “Mack customers and dealers can rest assured that we continue to have the critical parts available that keep trucks on the road rolling,” said Jonathan Randall, Mack Trucks senior vice president of North American sales and marketing. “Mack distribution centers are running at full speed as normal, and we plan to keep our parts well-stocked for our customers.” Customers and dealers should order parts as they normally would and in a normal quantity, and Mack Parts Distribution Centers will continue to fulfill orders on a typical schedule. Customers also can utilize Mack SELECT Part Store, Mack’s 24/7 online program that enables access to dealer inventory, offers pricing information and allows for online orders. All information is secure, and visitors are given a unique ID and password. Mack SELECT provides a complete order history, access to a VIN-specific catalog of parts and a variety of supplier catalogs and web links. Contact your Mack dealer to sign up for Mack SELECT. Engineered to meet stringent specifications and quality requirements, Mack parts available for order include HVAC, accessories, batteries, cabs, powertrain, electric, engine, filters and fluids.

As part of its commitment to outstanding service and support, Mack dealers also are offering digital training for technicians to teach valuable skills during this time of social distancing. Some training is done through webinars, while other training is recorded so technicians can view the subject on a time that best suits their needs. “During an uncertain time, one thing you can be certain about is Mack and its dealers are here to support you,” Randall said. “We are dedicated to continuing to offer support for our dealers and customers at the same exceptional level they’ve come to expect from Mack Trucks.” As part of its efforts to help trucking companies and dealers navigate through the COVID-19 situation, Mack Trucks recently launched https://info.macktrucks.com/thankyou, an online resource offering useful information from government agencies and other key sources, as well as Mack-specific updates regarding ongoing 24/7 customer support from Mack OneCall agents, parts availability, production and a link to dealer locations. The dedicated webpage also features a video expressing Mack’s gratitude for the tireless efforts of truck customers, professional drivers, service technicians and dealers during these difficult times, as well as links to the #thankatrucker conversation on social media. For more information, visit www.macktrucks.com. 

Felling Redesigns IT-I Tilt Feature Felling Trailers Inc. introduced its newly designed removable attachment rack for its IT-I (industrial tilt) model line. The removable attachment rack is a bolt on feature, mounted on the IT-I’s 5 ft. (1.5 m) stationary platform and sits inside the stake pockets on the exterior of the trailer then bolted in place. The rack is an ideal pairing with the IT-I tilt trailer, providing ample room to transport a skid steer on the 18 ft. (5.5 m) tilt deck, along with multiple attachments and various job site tools like shovels and brooms on the rack. The ability to transport all of these job site tools in one trip, safely, and efficiently saves the operator and their crew time and miles. Functionality and flexibility, the attachment rack has a 54 in. (137 cm) deck height allowing ample room to transport larger attachments such as grapple forks, trenchers, stump grinders, etc. on the stationary deck below the rack. The top rack provides a generous amount of space, 5 ft. by 81 in. (205.7 cm), to transport dirt/snow buckets, tillers or rollers. Keeping the load secure, the attachment rack has an angle lip on the front, and each side with rub rail and stake pockets, provid-

www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 8300 M-72 East Williamsburg, MI 49690 231-267-5060 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121

www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700

Functionality and flexibility, the attachment rack has a 54-in. (137 cm) deck height allowing ample room to transport larger attachments such as grapple forks, trenchers, stump grinders, etc. on the stationary deck below the rack.

ing the operator several points of securement. Additional storage for shovels/brooms is located on the roadside of the attachment rack with three bolt-on tubes. Built strong enough to carry the load, the removable attachment rack offers a capacity of 2,500 lbs. (1,134 kg). Felling Model FT-16 IT-I With Attachment Rack • 5 ft. stationary platform + 18 ft. tilt deck • Auto tilt deck latch mechanism

• 2 to 8,000 lb. axles with torsion suspension • 215/75R17.5 tires on plate wheels • Blackwood rubber infused decking • Pallet fork holder • Toolbox with lockable cover in hitch • Dual cushion cylinder tilt with lock valve • Twin 12k drop leg jacks • Removable attachment rack on stationary platform • Sublime green paint For more information, call 800/2452809 or visit www.felling.com. 

455 West Ave. North West Salem, WI 54669 608-786-2644

Construction Equipment Guide â€¢ Trucks & Trailers Section â€¢ www.constructionequipmentguide.com â€¢ May 30, 2020 â€¢ Page 63

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV (Z :LLU ([ *65,?76 -LSSPUNÂ»Z 5,> ([[HJOTLU[ 9HJR

([[HJOTLU[ 9HJR $ -\UJ[PVUHSP[` $ -SL_PIPSP[` :JHU 5V^ [V >H[JO =PKLV

-; 0; 0 0UK\Z[YPHS ;PS[ :OV^U ^P[O VW[PVUHS YLTV]HISL H[[HJOTLU[ YHJR [VVSIV_ K\HS QHJRZ ZWHYL ^OLLS [PYL TV\U[LK ZOV]LS [\ILZ WHSSL[ MVYR OVSKLY :\ISPTL .YLLU WHPU[ HUK TVYL

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP ([[HJOTLU[Z WYV]PKLK I` 7904, ([[HJOTLU[

www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182

3021 West 133rd Shakopee, MN 55379 952-445-6310 23580 Highway 55 Loretto, MN 55357 763-479-8200

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551

1400 W. Ogden Ave. Naperville, IL 60563 630-355-7150

www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362

600 Walnut Ct Rockdale, IL 60436 815-730-9011

3021 South 460 East Lafayette, IN 47905 765-477-6933

3110 Prairie Rd. Rockford, IL 61102 815-961-3160

1095 N Curry Pike Bloomington, IN 47404 812-333-9677

25166 State Road 2 South Bend, IN 46619 574-232-1461

3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576

3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160

Page 64 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195

2018 Takeuchi TB216, OROPS canopy, 15 hp Yanmar diesel, 9” wide tracks, Aux hyd., 232 hours .... ..........................................................................$27,910 11-12 JM Call Steve 262-373-2151

2018 HITACHI ZW80, Enclosed ROPS, 1.2 cy GP Bucket, 61 hp Kubita, ride control, 231 hours .............. ..........................................................................$67,500 11-12 JM Call Steve 262-373-2151

2017 Takeuchi TL12R2, enclosed ROPS, Cab w/heat & A/C, 111 hp Kubota T4 diesel, 80” bucket w/BOE, 583 hours ...........................................$62,490 11-12 JM Call Steve 262-373-2151

2014 Link-Belt 210 X3, enclosed ROPS, Cab w/heat & A/C, Hyd coupler, 160 hp T4i Isuzu diesel, 32” wide tracks..............................................................$100,700 11-12 JM Call Steve 262-373-2151

2007 Komatsu WA200-5, 127 HP, 23,400 # Operating Weight, EROPS, HEAT, AC, Bias Tires, Mono-Lever Hyd, Quick Cplr, New Paint, Price Includes 2.5 CU YD Bucket..........................$65,000 10-11 PK Call Dan Rude 605-336-0411

2005 Case 445, s/n N5M401377, 2950 Hours, ROPS with side windows( no front door ),two speed, ride control manual front coupler,76" TAK bucket w/HD tooth bar, 12 X 16.5 tires and spare ... .....................................................................$18,500 11 JM call STEVE @ 630-878-8765

Bobcat E42, includes 12” & 36” buckets. Starts and runs well. ..............................................$40,000 Call Kevin @ 630-510-6050 11 JM

2006 Ditch Witch SK650, 2700 Hours, Good Condition .. ....................................................................Call For Price 11-12 EB Call Tania 614-443-9751 x237

2001 Grove TMS 500E, 40 Ton, 95’ Main Boom, 26’-45’ Jib, 3 Sheave Block, 68,000 Miles, 10,112 Hrs, 1 Owner Machine, Fresh Grove Paint, Cleveland, Ohio .............................................CALL Call Andy Forepaugh 216-316-1511 11-12 EB

2005 Linkbelt HTC 8660, 60 Ton Cat C-11 Engine, 13512 Hours, 110’ Main Boom, 56’ Jib, Aux Hoist , 3 Sheave Block, Ball Current Certification, Original Owner................................................Call for Price Call Andy Forepaugh 216-316-1511 11-12 EB

2015 New Holland W80C, s/n P00483, 864 Hrs, Radio, A/C, Heat, Front & Rear Work Lights, Auto Ride Control, Cold Weather Pkg, Air Seat, Standard Aux. Hyd., Deluxe Cab, Return to Dig and Bucket .................................................$62,000 dwietbrock@ronsonequipment.com 10-11 JM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 11-12 EB

2007 DD138HF Roller, (s/n: 194909) 4300 Hours, Paving Width 8’-15’, Heated Screed, Legend 84” Drum Width, #5671................................$22,500 Screed System ............................................$59,900 11 JM 800-283-1336 Call Steve @ 630-878-8765 11 JM

2018 Case SR270, s/n NHM435461, 1770 Hours, Cab with Heater & Air, Two Speed Mechanical Controls, Hydraulic Coupler,12X16.5 Ties 78" Heavy Duty Dirt Bucket...............................$33,500 11 JM Call Steve @ 630-878-8765

2017 DD120C, w/Intelligent Compaction and Pass Counting, #7540 ...........................................$97,000 11 JM 800-283-1336

SPECIAL APPLICATION BUCKETS, Hundreds in Stock - Variety Sizes - For many models Call Emilee 218-863-6444 11-12 AP ai@attachmentsintl.com

2016 Hyundai HX160L, One owner, 10’ 2’’ Long arm, 137 HP Perkins Engine, 3,300 hours...$85,000 11 JM Call George 219-696-8911

2014 Carlson CP100 Paver, #6831, 1800 Hrs........ ..................................................................$126,750 800-283-1336 11 JM

2015 Leeboy 8500C, s/n 122257, 2750 Hrs,

2015 LeeBoy 8510C Paver, #8165 ...........$58,750 800-283-1336 11 JM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 65

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted

WANTED (USA): HYUNDAI ATTACHMENTS - LOOKING FOR A GOOD USED GP BUCKET 4-6 CU.YD. FOR A 1996 HYUNDAI HL770 LOADER. EMAIL: DONNIE@RADIATIONCLEANTECH.COM; PHONE: 601-319-9453 –––––––––––––––––––––––––––––––– WANTED (NY): BANDIT 65 WOOD CHIPPER - USED BRUSH BANDIT 65XP, 75XP, 2002 OR NEWER, 35HP MINIMUM. EMAIL: DSPTECH11@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX400LC-1 EXCAVATOR EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR 1000LB FRONT COUNTERWEIGHT FOR CASE 455C CRAWLER LOADER. EMAIL: ROGERPF1@FRONTIERNET.NET; PHONE: 570-639-3058 –––––––––––––––––––––––––––––––– WANTED (US): CAT 311, 312, 315, 320, 325, 330, 336 CL,DL,EL EXCAVATORS UNDER 8000 HOURS. EMAIL: REBUILD@TUSCO.NET; PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: AMPHIBIOUS EXCAVATORS, ALL MAKES AND MODELS, NEW OR USED + ALL MAKE AND MODEL BOOMS AND STICKS LONGER THAN NORMAL + ALL MAKE AND MODEL BROKEN BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US); LOOKING FOR PILOT VALVE 9137384 FOR HITACHI 200LC-3 EXCAVATOR. EMAIL: PJUREKX1@GMAIL.COM; PHONE: 585-492-2449 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR OFFHIGHWAY TRUCKS - I NEED #5 CAT 775D &E ROCK BEDS ONLY. ONLY NEED BEDS. EMAIL: WEBBPAGE1@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS WANTED - SCHWING, PUTZMEISTER, ALLIANCE, CIFA, ETC. ALL MODELS, BRANDS, SIZES. OLD OR NEW! BOOM PUMPS,TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD RETIRED, NO LONGER USED & PARTS PUMPS ALSO PURCHASED. EMAIL INFORMATION A.S.A.P. INSTANT PAYMENT GUARANTEED !! FINDERS FEES PAID!!! EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (PA): I’M LOOKING FOR A PUSH THERMOPLASTIC MACHINE. CAN BE ANY BRAND. EMAIL: HELLOELISA@ICLOUD.COM ––––––––––––––––––––––––––––––––

WANTED (USA): CAT 330-336 DL SERIES EXCAVATORS EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (RI): CATERPILLAR 4+ MISCELLANEOUS EQUIPMENT. I AM HELPING A FRIEND TO FIND A PART FOR HIS CAT MODEL 426, SERIAL #7BC02647, PART #9R383. IT WOULD BE REALLY HELPFUL IF THIS PART WAS AVAILABLE IN EASTERN USA, ESPECIALLY IN THE NORTHEASTERN STATES, AND AVAILABILITY, PRICE, AND SHIPPING ARE IMPORTANT IF THE PART IS AVAILABLE ELSEWHERE. THANK YOU FOR YOUR HELP. EMAIL: JOETTAKIRK@AOL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR D8R CRAWLER DOZER. LOOKING FOR ORIGINAL 2018 D8R CATERPILLAR BULLDOZER. EMAIL: ARABHURUR@GMAIL.COM; PHONE: +251-911513133 –––––––––––––––––––––––––––––––– WANTED (SC): ALL MODELS BRADCO TRENCHING / BORING / CABLE PLOWS; LOOKING FOR 3 PT HITCH 3 OR 4 FOOT TRENCHER 6" WIDE FOR REAR KUBOTA EMAIL: PEPPERJACKPM@YAHOO.COM; PHONE: 803-460-2600 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR EXCAVATORS. LOOKING FOR USED AMPHIBIOUS EXCAVATORS, MARSH BUGGIES AND MARSH MASTERS - ANY BRAND. ALSO LOOKING FOR BROKEN/DAMAGED LR BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): INGERSOLL RAND AIR COMPRESSOR, MODEL 125 CFM. NEED EXHAUST/INTAKE MANIFOLD FOR A CONTINENTAL G193A GAS ENGINE WHICH IS IN THE I/R GYRO FLOW 125 COMPRESSOR. EMAIL: HFINCHTTD@FONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED (VA): FORD 1920 758B BACKHOE ATTACHMENT. EMAIL: CONWELL1208@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): USED HITACHI EXCAVATORS EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92-332-248-9350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): 1-FINAL DRIVE & CONTROL VALVE ASSEMBLY, 2-ENGINE WIRING HARNESSES, HOODS, DISPLAY MODULES & ECU'S SN #FGY0381 FOR SAMSUNG SE240 LC-3 EXCAVATOR. EMAIL: TVHCSHOP@GMAIL.COM; PHONE: 920-735-1221 –––––––––––––––––––––––––––––––– WANTED (KS): CAT 922B INJECTION FUEL LINE. I NEED ALL 4 FOR MY 1960'S DIESEL FRONT-END LOADER. EMAIL: BLACKNIGHT64R@ATT.NET ––––––––––––––––––––––––––––––––

WANTED: CAT WHEEL LOADER 950B, 950E, 966E, 966F, 966FII. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS EX200, EX270LC, EX400, EX400LC. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM. –––––––––––––––––––––––––––––––– WANTED: LINCOLN WELDERS, MODELS 250/300/225. I'D LIKE TO BUY USED MACHINES LOW HOURS. EMAIL: JONATHANDAYTON4@GMAIL.COM; PHONE: 806-292-7452 –––––––––––––––––––––––––––––––– WANTED (CA): JOHN DEERE 330 EXCAVATOR. EMAIL: JIMWLAMBERT@HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (NM): BARBER GREENE BG-225B SLAT CONVEYOR, COMPLETE LEFT SIDE. EMAIL: JR_STRIPING@LIVE.COM –––––––––––––––––––––––––––––––– WANTED (US): LOOKING FOR CME 45 WITH DEUTZ DIESEL DECK ENGINE AND AUTOMATIC HAMMER. ANY CONDITION. EMAIL: GEONETICS@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (IL): HAULOTTE AERIAL LIFT, ALL MODELS. LOOKING FOR A TOWABLE BOOM LIFT. EMAIL: SAWMANDAN@SBCGLOBAL.NET PHONE: 630-553-7612 –––––––––––––––––––––––––––––––– WANTED (MI): ALL MODEL KUBOTA WHEEL LOADERS. EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: 616-813-3642 –––––––––––––––––––––––––––––––– WANTED (NV): CATERPILLAR 14G MOTOR GRADER. EMAIL: SALES1@HIEEQUIPMENT.COM PHONE: 7025295171 –––––––––––––––––––––––––––––––– WANTED (USA): LOOKIN FOR A GOOD USED KOMATSU PC 400-5 EXCAVATOR EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 –––––––––––––––––––––––––––––––– WANTED (USA): TAKEUCHI TB0-35 AND 135 WITH CABS. RUNNING OR FOR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR COMPACT TRACK LOADERS, USED CATERPILLAR SKID STEER LOADERS 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XE. EMAIL: LSGLOBAL@NVER.COM –––––––––––––––––––––––––––––––– WANTED (USA): A GOOD USED C-12 CAT ENGINE FOR A SHORT NOSE 2000 PETERBILT 379 ROAD TRACTOR. ENGINE TO HAVE CORRECT ECM AND S# BEGINS WITH 2KS , 380 MIN. HP. CONTACT JIM ARNETT JARNETTJR@ORBITSDO.COM; CELL# 937-603-3965. ––––––––––––––––––––––––––––––––

WANTED (USA): CATERPILLAR D11 CRAWLER DOZERS - INTERESTED IN PARTS FOR LARGE DOZERS FOR COAL MINES AND AGGREGATE QUARRIES. EMAIL: BIGIRONLUNS87@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 315,320,325,330,336 DL SERIES EXCAVATORS UNDER 8000 HOURS AND WHOLESALE PRICED MACHINES. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: TAKEUCHI MINI EXCAVATORS TBO-35’S WITH CABS, RUNNING MACHINES AND/OR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (NY): LOOKING FOR USED 5 TON WIRE ROPE HOIST TO RUN ON A PATENT TRACK EMAIL: INFO@ BRIDGEHAMPTONSTEEL.COM PHONE: 631-537-2486 –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR 330C L EXCAVATOR - LOOKING TO BUY CATERPILLAR 330CL & 330DL IN GOOD RUNNING CONDITION. EMAIL: RIZ@MEGAEQUIPMENTS.COM PHONE: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS TRENCOR TRENCHING / BORING / CABLE PLOWS. EMAIL:ADMIN@MITCHELLHOPPER.COM PHONE: 432-888-2593 –––––––––––––––––––––––––––––––– WANTED (FL): BOBCAT MT50 COMPACT TRACK LOADERS EMAIL: EIDNKSLJK@ICLOUD.COM PHONE: 6039 2I28 939 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS CATERPILLAR WHEEL LOADERS. LOOKING TO BUY ANY CAT LOADER AT WHOLESALE PRICE. EMAIL: MARKETING@ GCESEQUIPMENT.COM PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (TX): ALL MODELS CATERPILLAR MOTOR GRADERS. EMAIL: MAGDIELLERMA@GMAIL.COM PHONE: 956-432-7379 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR WHEEL LOADERS. CAT 966H OR K WITH UNDER 10,000 HOURS, BUCKET, COUPLER. SET OF FORKS IS A PLUS. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (WV): ALL MODELS TERRAMITE BACKHOE LOADERS - CHECKING PRICES FOR TERRAMITE T7 FRON RIM FOR SERIAL NUMBER 227X0102. EMAIL: EDWINANDDIANA@FRONTIER.COM –––––––––––––––––––––––––––––––– WANTED (FL): CASE CRAWLER DOZERS, ALL MODELS. EMAIL: JABOWEND@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (USA): KOBELCO K907D EXCAVATORS - MAIN HYDRAULIC CONTROL VALVE (907D) SERIAL #LN7001 TO YG0501. KOBELCO PART # 2436U1165F2, KAWASAKI TAG # KMX15A/23009 ALSO USED ON YUTANI 1986, MODEL 195. EMAIL: PTSCOTT@HTVA.NET –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU ATTACHMENTS - SKELETON BUCKET FOR KOMATSU 220 EXCAVATOR 54" TO 60". CAN ADAPT FROM OTHER MACHINES AS LONG AS ITS 80 MM PINS. EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 –––––––––––––––––––––––––––––––– WANTED (USA): HYDRA-MAC 1700 SKID STEER LOADER. EMAIL: MALONEYFARM.1@ WINDSTREAM.NET –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR EXCAVATORS, ALL MODELS. EMAIL: PAUL@HEAVYSURPLUS.COM; PHONE: 214-625-2652 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D5B OR D6C CRAWLER DOZER. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 970F WHEEL LOADER. EMAIL: SALES3@GCESEQUIPMENT.COM; PHONE: 657-347-6605 –––––––––––––––––––––––––––––––– WANTED (GA): KOBELCO EXCAVATORS, ALL MODELS. MINI- OR MIDIEXCAVATOR. USED. UNDER 2000HRS. CA 35 T0 40 HP FULLY FUNCTIONAL. THUMB EMAIL: JKSAPP@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (US): LIMA CRANE – ANY LIMA 2400B MACHINES IN ANY TYPE OF CONDITION. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D8T CRAWLER DOZER. LOOKING FOR MACHINE WITH ISSUES AND/OR HIGHER HOURS, AT A WHOLESALE PRICE. BUYER WANTS MACHINE CHEAPER THAT HE CAN PUT THROUGH HIS SHOP AND REFURBISH AS NEEDED. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (US): YANMAR YFW55R DUMPERS - FINAL DRIVE OR A PARTS MACHINE. EMAIL: ORDERS@LEWEQUIP.COM; PHONE: 724-887-9375 –––––––––––––––––––––––––––––––– WANTED (US): GEHL DL-10H-55 TELEHANDLERS / FORKLIFTS - SN # 10H55JR024028 NEED PART # L71553. EMAIL: JEFF.JAEGER@HOTMAIL.COM; PHONE: 345-925-9709 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT S175 SKID STEER LOADERS; ANY STATE NEAR ARKANSAS WOULD BE HELPFUL. EMAIL: BRIANFITZJURLS@GMAIL.COM; PHONE: 479-847-4202 ––––––––––––––––––––––––––––––––

WANTED: LINK-BELT LS-348H CRANE – LOOKING FOR THE BOOM WIRE WRAP FOR A LINK-BELT 348 HYLAB , S/N L9J89965. EMAIL: POWERALEXHEAVY EQUIPMENT@GMAIL.COM PHONE: 386-496-1340 –––––––––––––––––––––––––––––––– WANTED (NH): DYNAHOE 160 BACKHOE LOADERS - I'M LOOKING TO FIND ANY AND ALL INFORMATION ABOUT THIS MACHINE, FORUMS, TROUBLESHOOTING ETC. I HAVE ONE THAT RUNS BUT CAN'T GET IT TO MOVE... HELP PLEASE!! EMAIL: RUSSELLMORRIS66@AOL.COM –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS KOLBERG ASPHALT / CONCRETE / PAVING LOCATED IN TAMPA, FL. LOOKING FOR PARTS FOR A VIBRATING SCREEN. KOLBERG SCREEN. SR # VS514DD1113-91. EMAIL: TODD.BUSH@ PREFERREDMATERIALS.COM PHONE: 407-948-6796 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS UPRIGHT WHEEL LOADERS - LOOKING FOR MANUALS AND SPARE PARTS FOR FURUKAWA WHEEL LOADERS, ANY ASSISTANCE WOULD BE GREATLY APPRECIATED. EMAIL: DOUG.KLITSCHER@LIVE.COM.AU; PHONE: +61401627855 –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU PC400LC-7L EXCAVATOR - HYDRAULIC QUICK COUPLER FOR A 05 PC 400 L7 HD. 100MM PINS. EMAIL: DGMEINER62@GMAIL.COM; PHONE: 315 767-4111 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS JOHN DEERE BACKHOE LOADERS T09310G056237 JOHN DEERE 555G TRACK LOADER WITH BACKHOE, NEED SWING FRAME OR WILL BUY THE WHOLE DETACHABLE BACKHOE IN GOOD CONDITION. EMAIL: JRBUSTA@HOTMAIL.COM; PHONE: 417-668-5978 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR D9L CRAWLER DOZER - CAT D9-L ENGINE COMPLETE IN GOOD RUNNING CONDITION. WEST COAST AREA. BEST DEAL CONTACT DAN. EMAIL: DANCRANE1122@YAHOO.COM; PHONE: 707-433-1122 –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR 970F AND 972H WHEEL LOADERS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587. –––––––––––––––––––––––––––––––– WANTED (AR): CHEVROLET UTILITY VEHICLES, ALL MODELS. LOOKING FOR TRUCKS, HEAVY EQUIPMENT, SUVS, ETC., NOT TOO MANY MILES. EMAIL: MLBAUTOSALES247@GMAIL.COM; PHONE: 501-533-5912. ––––––––––––––––––––––––––––––––

Page 66 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Timed Auction May 23 - 30, 2020 For: Annual Construction & Rental Return Auction (Atlantic City, NJ) • Virtual Live Auction Sat., June 6, 2020 For: Light Construction & Utility Equipment (Syracuse, NY) • Virtual Live Auction June 12 - 13, 2020 For: 2 Day Construction Equipment Auction (Atlantic City, NJ) • Virtual Live & Timed Auction Wed., June 17, 2020 For: Very Large Late Model Cat Equipment Auction (Boston, MA) • Virtual Live Auction June 18 - 19, 2020 For: Late Model Construction Equipment Auction (Syracuse, NY) • Virtual Live Auction Sat., June 20, 2020 For: Very Late Model Construction Equipment (Las Vegas, NV) • Virtual Live Auction Mon., June 22, 2020 For: Construction Rental Fleet Auction (Houston, TX) • San Angelo, TX Wed., June 24, 2020 For: Very Late Model Rental Fleet Auction • Toronto, Canada Thurs., June 25, 2020 For: Unbelievable John Deere Equipment, Mostly in Like-New Condition

• NE Regional Event June 23 - 24, 2020 • North Franklin, CT June 23 - 24, 2020 • Houston, TX June 23 - 24, 2020 • Columbus, OH June 25, 2020 • Los Angeles, CA June 26, 2020 • Atlanta, GA June 30, 2020 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Online/Sacramento, CA Sat., June 13, 2020 For: Monthly Public Auction • Online/Woodburn, OR Fri., June 26, 2020 For: Monthly Public Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY June 2, 2020 • ONLINE ONLY June 9, 2020 • ONLINE ONLY June 16, 2020 • ONLINE ONLY June 23, 2020 • ONLINE ONLY June 30, 2020 • ONLINE ONLY July 7, 2020

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

BIG IRON www.bigiron.com 800-937-3558

All our auctions are now online bidding only!

• ONLINE ONLY June 3, 2020

• Fort Worth, TX June 2 - 3, 2020

• ONLINE ONLY June 10, 2020

• Orlando, FL June 4, 2020

• ONLINE ONLY June 17, 2020

• Williston, ND June 5, 2020

• ONLINE ONLY June 24, 2020

• Los Angeles, CA June 5, 2020

• ONLINE ONLY July 1, 2020

• Wasilla, AK June 6, 2020 • Kansas City, MO June 9, 2020 • Saskatoon, SK June 10, 2020 • Sacramento, CA June 10, 2020 • Grande Prairie, AB June 11 - 12, 2020 • Las Vegas, NV June 12, 2020 • Minneapolis, MN June 16, 2020 • Chicago, IL June 18, 2020 • Nashville, TN June 19, 2020 • Kenmare, ND June 20, 2020

DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • VIRTUAL/ONLINE Sat., June 20, 2020 For: Utility and Construction Equipment & related items DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Madison, IN Tues., June 9, 2020 For: Summer INDOT Absolute Auction 1 • Greenfield, IN Tues., June 16, 2020 For: Summer INDOT Absolute Auction 2

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853

Tues., June 2, 2020 For: Construction, Utility Equipment and more

• Stoutsville, OH Sat., June 6, 2020 For: Spring Columbus Heavy Equipment, Truck & Trailer Auction

• ONLINE/Plymouth Meeting, PA Wed., June 10, 2020 For: 32nd Annual Auction for Danella Companies Inc.

FREY & SONS, INC. www.freyandsons.com 419-455-3739

• TIMED ONLINE ONLY Tues., June 16, 2020 For: Construction, Utility Equipment and more

• ONLINE ONLY June 10 – 18, 2020 For: Partee Construction Retirement Auction HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012 • ONLINE ONLY Sat., June 13, 2020 For: Pike Auction HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Livingston, LA June 25 - 27, 2020 For: 3-Day Independence Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 19, 2020 For: Trucks, Trailers & Equipment • Marietta, PA Fri., August 14, 2020 For: Trucks, Trailers & Equipment HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • LIVE/VIRTUAL Thurs., June 18, 2020 For: RL Brooks Trucking, LLC Absolute Auction INTEGRITY SALES & AUCTION www.integritysales.com 715-443-5000 • Merrill, WI May 29 - 30, 2020 For: Construction Equipment, Forestry, Farm and more. (Day 2 Timed Online Only) I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • ONLINE ONLY Fri., June 5, 2020 For: Heavy Equipment, Trucks, Trailers & more J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163 • TIMED ONLINE ONLY

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL June 16 - 18, 2020 For: Truck, Construction, Ag & Forestry Auction

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • ONLINE ONLY Tues., June 2, 2020 For: Farm & Construction Equipment Auction • ONLINE ONLY Tues., June 16, 2020 For: Farm & Construction Equipment Auction • ONLINE ONLY Tues., June 30, 2020 For: Farm & Construction Equipment Auction MEEKINS AUCTION COMPANY www.meekinsauction.com 910-739-0547 • Lumberton, NC Tues., June 30, 2020 For: Construction & Truck Auction MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

• ONLINE ONLY Thurs., June 11, 2020 For: Midas Utilities Auction

• Kenmore, WA Sat., June 6, 2020 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Brooklyn, MS May 29 - 30, 2020 For: Late Spring Construction Auction • Barnesville, OH Tues., June 2, 2020 For: Absolute Inventory Reduction Auction • ONLINE ONLY June 3 - 9, 2020 For: Absolute Governmental Asset Online Auction • Pelzer, SC Thurs., June 11, 2020 For: East Coast Construction & Transportation Public Auction • Kissimmee, FL Sat., June 27, 2020 For: Central Florida Public Auction • Columbus, OH Thurs., July 9, 2020 For: Northeast Heavy Equipment & Truck Auction • Stanton, TX Wed., July 15, 2020 For: Permian Basin Unreserved Public Auction JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • ONLINE ONLY Thurs., June 25, 2020 For: North Texas Fleet Reduction Auction

• ONLINE ONLY Tues., June 2, 2020 For: Government Auction • ONLINE ONLY Wed., June 3, 2020 For: Ag Equipment Auction • ONLINE ONLY Thurs., June 4, 2020 For: Truck & Trailer Auction • ONLINE ONLY Wed., June 10, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., June 11, 2020 For: Construction Equipment Auction

• Fort Meyers, FL August 7 - 8, 2020 For: Heavy Equipment, Industrial Machinery, Trucks & Trailers, Commercial Vehicles & more

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • ONLINE ONLY June 3 - 4, 2020 For: 11th Annual Springtime Auction

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • ONLINE ONLY June 5 - 10, 2020 For: Timed Online Upper Midwest Locations • ONLINE ONLY June 19 - 24, 2020 For: Timed Online Upper Midwest Locations • West Fargo, ND Wed., July 29, 2020 For: AgIron West Fargo Event • ONLINE ONLY July 30 – Aug. 6, 2020 For: Timed Online Upper Midwest Locations

THE AUCTION COMPANY www.theauctioncompany.net 951-657-5300 • Colton, CA June 13 - 15, 2020 For: Heavy Equipment, Trucks, Trailers & more

VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Lake Elsinore, CA Sat., July 25, 2020 For: July 2020 Auction

• ONLINE ONLY Tues., June 16, 2020 For: Government Auction

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760

• ONLINE ONLY Wed., June 17, 2020 For: Ag Equipment Auction

• Perris, CA Sat., June 13, 2020 For: Public Auction

• ONLINE ONLY Thurs., June 18, 2020 For: Truck & Trailer Auction

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300

ROSEN & COMPANY, INC. www.bidrosen.com 216-990-1831

• Phoenix, AZ Fri, June 5, 2020 For: Public Auction

• Cleveland, OH Fri., June 20, 2020 For: Heavy Equipment Auction

• Phoenix, AZ Fri, July 11, 2020 For: Public Auction

ROYAL AUCTION GROUP, INC. www.royalauctiongroup.com 239-936-4121 • Fort Meyers, FL June 5 – 6, 2020 For: Heavy Equipment, Industrial Machinery, Trucks & Trailers, Commercial Vehicles & more

YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • North Baltimore, OH Thurs., June 4, 2020 For: Ohio Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 67

Unreserved public equipment auctions

Equipment financing by equipment experts.

Caterpillar 561M

2012 Link-Belt 218 HSL 110 Ton

2 – 2014 Kenworth T800 w/Ramvac HX12

2019 Kenworth T800 Hot Oil – Low mileage

1 of 2 – 2014 & 1 of 3 – 2013 Kenworth W900 Winch

2012 Case 621F

2014 Kenworth C550

2015 Kenworth T800 w/Manitex 40124S 40 Ton

4 of 12 – 2013 Kenworth T800

4 of 8 – 2015 Western Star 4700SF 4200 Gallon

1 of 2 – 2012 Kenworth C550

2012 & 2011 Western Star 4900SF w/National 800D 23 Ton

Williston, ND

June 5 (Fri) 8 am

Equipment includes:

Online bidding information

Truck tractors, vacuum trucks, bed trucks, boom trucks, wheel loaders, pipelayers, cranes & much more.

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

IMPORTANT MESSAGE: Due to COVID-19, all of our auctions are now online bidding only. For the most up-to-date information visit rbauction.com/covid-19 Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701

More items added daily Call about selling: 1.800.211.3983 Financing & leasing available

Location 5589 141st Ave NW, Williston, ND, 58801

Up to 100% financing, with no money down.

See complete listings at rbauction.com

Page 68 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SHIELDS Provides Polycarbonate Windshields for Heavy Equipment

SHIELDS maintains extremely stringent design and production standards. In addition, the company has developed a proprietary SUPERCOAT protective coating process. SHIELDS from page 14

pany and currently serving as vice president of finance; daughter, AlyxaKay McKee, as director of communications; and son-in-law, Robert McKee, engineering department manager. As Brad stated, if you are familyowned and operated, everyone works trade shows and when needed, like his son, Beau Shields who works every show he can. The company has been producing impact resistant polycarbonate replacement shields for all major brands of skid steers for both

The company’s polycarbonate windshields are half the weight, yet 250 times stronger than glass.

OEM and aftermarket for nearly 20 years. SHIELDS has invested substantially in the equipment and facilities needed to earn its position as a leader in the field. The company’s 45,000 sq.-ft. facility houses all of its operations, from sales and accounting to its engineering, thermoforming, post coating and precision trimming. In discussing the manufacturing process for his company’s replacement windshields, Shields stated that a major challenge to forming polycarbonate is in maintaining cor-

Karen and Brad Shields

rect optical values. He explained that polycarbonate replacement windshields of lesser quality can actually create fatigue and dizziness as a consequence of the operator’s vision being impaired by a distorted view. To overcome this, Shields maintains extremely stringent design and production standards. In addition, the company has developed a proprietary SUPERCOAT protective coating process, applied post forming to enhance clarity and ensure maximum scratch resistance. Conducted in a Class

10,000 clean room, the post coating process avoids having the coating shear from the polycarbonate as often occurs with forming products after the coating is applied. Shields sees great potential for future growth of the company and looks to expand both its dealer network and retail operations. He stated that, once an equipment owner tries its products, they’re quick to recognize the outstanding benefits offered by SHIELDS polycarbonate replacement windshields.  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 69

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Vogele Super 1900-3 Tracked Paver, Caterpillar D7E Track-type Tractor w/ 1:50 scale - $125 Pipe line configuration, 1:50 scale - $115

Caterpillar AP-1050 Asphalt Paver, 1:50 scale - $100

Terex 33-07 Quarry Truck, 1:40 scale - $125

Caterpillar 14M Motor Grader, 1:50 scale - $100

Case 850 Dozer, 1:35 scale - $50

Caterpillar 245 Excavator, 1:50 scale - $100

Caterpillar D4 Tractor w/Letourneau Dozer & Hyster winch, 1:16 scale - $175

Allis Chalmers Forty-Five Grader, 1:50 scale - $75

Caterpillar 963K Track Loader w/Ripper, 1:50 scale - $85

Caterpillar 623G Elevating Scraper, 1:50 scale - $50

Caterpillar 323F Excavator w/thumb, 1:50 scale - $80

JCB 712 Compact Articulated Truck, 1:35 scale - $35

JCB 467 WLS Articulated Wheel Loader, 1:50 scale - $75

Volvo L60H Wheel Loader, 1:50 scale - $75

Liebherr L522 Wheel Loader, 1:50 scale - $45

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 70 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Live Onsite Bidding & Online Bidding Available

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com.

Heavy Equipment, Yellow Iron & More June 12th Heavy Equipment Auction LIVE & ONLINE 1170 Ivanhoe Rd, Cleveland, OH 44110

Commercial/Contractor Trucks & Trailers, Dozers, Excavators, Skid Steers, Wheel Loaders Recycling, Industrial, Ancillary Machinery, Fuel Tanks, Vintage, Collectibles and much more!!

Preview Date: Thursday, June 11, 2020 Preview Time: 10:00 AM Rosen & Company Inc. / Buddy Barton Auctioneer Auctioneers, Industrial Appraisers & Real Estate https://www.rosenandcompany.com

ASSOCIATED GENERAL CONTRACTORS (AGC) AGC’s Three Part Webinar Series: Business Development, Marketing & Proposal Basics for the General Contractor Dates: May 12, 2020 - 2:00pm to 3:00pm June 23, 2020 - 2:00pm to 3:00pm July 28, 2020 - 2:00pm to 3:00pm Price: Member : $149 Non-Member: $199 Description: The AGC Business Development WebEd Series, brought to the AGC membership by the AGC BD Forum, will be held in May, June and July of this year and will be sure to improve your business by focusing on the basics of Business Development, Marketing and Proposals for the General Contractor. We are confident that by the end of this WebEd Series, you will be more prepared to grow your talent within your company, expand your client map and continuously improve your processes and strategies.. Part One: Basics of Business Development for the Busy General Contractor – COMPLETED Part Two: Basics of Marketing for the Busy General Contractor – June 23, 2020 The Marketing segment of AGC’s Business Development WebEd Series will cover the various areas of marketing essential to success in a competitive marketplace. The discussion will begin with the strategy and planning of the marketing activities that are imperative to build awareness of your firm and drive value to your existing clients. Once the strategy is developed, the activities you choose should encompass both digital and traditional marketing activities to maximize your brand message and exposure. We will discuss tips and tricks to make the best decisions for your firm, prioritize the best marketing actions to execute and discuss measuring the success of your efforts. Part Three: Basics of Proposals and Presentations for the Busy General Contractor – July 28, 2020 Most proposals and presentations have 3 things in common; a lot of talk about how great we are; a lot of boiler plate language that says the same thing as our competitors; and Boring, boring, & more boring. All 3 are losing behaviors! In this webinar, we will discuss the following: • Gathering the intel needed to craft a tailored message • Creating a compelling offering around the client’s key issues • Flipping the focus from “Us” to “Them”. • Focusing on the “Benefits” we offer, as opposed to the “Features” • Mastering the use of the Executive Summary • And much more!

For more information on the above event, contact AGC of America, 2300 Wilson Blvd. Suite 300, Arlington, VA 22201. Phone: (703) 548-3118. www.agc.org. For computer specifications, please visit https://www.gotomeeting.com/meeting/ online-meetingsupport or contact webinars@agc.org. MINNESOTA ASPHALT PAVEMENT ASSOCIATION Flagger Training Seminar When: Tuesday, June 2, 2020 Time: 8:00 AM to 12:00 PM Where: MnDOT Arden Hills Training & Conference Center 1900 County Road I West Shoreview, MN 55126 MnDOT & MAPA will be offering a Flagger Train the Trainer 4 hour Course. The cost is $85. Online Registration Deadline is May 26, 2020. This course is used to qualify contractor’s personnel to train employees to act as flaggers on MnDOT construction projects. Attendees will meet requirement of the MnDOT flagger training language contained in the traffic control special provision of selected jobs. Their names will be placed in the MnDOT Qualified Flagger Trainer database for five years and will meet requirements for future projects. The course includes review of Field Manual flagger requirements and related layout, discussion of safe practices, flagger attire, and flagger responsibilities. For more information on the above event, contact MAPA, 1000 Westgate Drive, Suite 252, St. Paul, MN 55114. Phone: 651/636-4666. Email: info@mnapa.org. U.S. DEPARTMENT OF ENERGY BETTER BUILDINGS 2020 BETTER BUILDINGS, BETTER PLANTS SUMMIT Dates: June 8 – 10, 2020 Place: Hyatt Regency Crystal City, Arlington, Va. The Better Buildings Summit is a national meeting for Better Buildings, Better Plants Partners, and other key stakeholders. The summit provides the opportunity for professionals to explore emerging technologies and share innovative strategies in energy and water efficiency. Attendees can expect three days of interactive sessions with industry experts and market leaders, as well as many opportunities to network with peers. Building tours will also be available. Registration is Open! For more information or to register for this event, visit betterbuildingssolutioncenter.energy.gov/summit. ASSOCIATED GENERAL CONTRACTORS (AGC) 2020 Federal Contractors Conference Dates: June 8 – 10, 2020 Place: Ritz-Carlton Hotel, Washington, DC The latest project forecasts, expert insight on upcoming regulatory hurdles, and ample networking opportunities with agency decision makers are critical to being competitive in the federal construction market. Join construction industry leaders and their federal agency counterparts at the AGC Federal Contractors Conference to take advantage of such essential information and the many networking opportunities. Registration is Open! For more information on the above event, contact AGC of America, 2300 Wilson Blvd. Suite 300, Arlington, VA

22201. Phone: (703) 548-3118. www.agc.org. For information about registration, contact Ms. Rockkie Dunton at AGC of America, rockkie.dunton@agc.org. DEMING LOGGING SHOW 2020 DATES: JUNE 13 – 14, 2020 PLACE: DEMING LOGGING SHOW GROUNDS BELLINGHAM, WA, USA Deming Log Show is a nonprofit organization benefiting busted up loggers and their families. Home to the Annual Deming Logging Show, and other events. Originally established in 1963, our show was inspired by the need to financially assist loggers who were injured in the woods. Our grounds come alive the second full weekend in June each year for our annual Deming Logging Show with events and exhibitions to display the skills, tools, and technology used in the logging industry. A nonprofit organization, the Deming Logging Show relies on the support of local people, businesses and volunteers to support families of loggers who have been injured or killed on the job. Deming Logging Show is going to be a two-day event that forays into categories like Business Services. The Forestry Industry fosters hazards for the workers. A worker needs to have the best of skills to survive in such an industry. Deming Logging Show is that event which inculcates these skills in these workers. This Expo features exhibitors exhibiting the products and gear which is used by the loggers and the ones who work in the nearby forests. Along with this, the event also financially assists the loggers and workers who were injured on their jobs, or worse, killed. Deming Logging Show is run by a nonprofit organization. The registration fee which the attendees pay is minimal and every year, this event manages to attract the attention of about 5,000 visitors. For more information on the Deming Loggins Show 2020, contact Deming Logging Show Grounds, 3295 Cedarville Road, Bellingham, WA 98226. Phone: 360/592-2423. NATIONAL ASSOCIATION OF WOMEN IN CONSTRUCTION Groundbreaking Women in Construction Conference Dates: August 24 – 25, 2020 Place: Hilton San Francisco Union Square San Francisco, California Groundbreaking Women in Construction Conference is much more than just a conference. It is a catalyst for change to inspire women at all levels to develop their leadership skills, expand their influence and boost industry growth potential. GWIC enables attendees to share, learn, challenge and inspire each other to contribute to their workplace and employer and realize career success. GWIC is for women and men in all construction sectors – architecture, engineering, consulting, contracting, supplier-vendors and related businesses, and in all career fields and levels, to expand their understanding of workplace interactions, key industry issues, and better talent management. For more information on GWIC Conference, contact the National Association of Women in Construction, 327 S. Adams Street, Fort Worth, TX 76104. Phone: 817/877-5551

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 71

CON S T RUC T ION E QUIP ME N T

250+ ITEM E S SELL

AUCT CTIION

NO RESERVE! Straight. Simple. Sold.®

THURS U SDAY, S , JUNE 11 Bidding star ts to close at 10 a.m

DE2444 ‘11 CAT AT 308 excavator

GW9861 ‘10 Case 1650L crawler dozer

DF4010 ’09 Komatsu D51EX-22 D Series 22 dozer

DE2443 ‘14 CAT 236D skid steer loader

DH5343 ‘16 Kubota K SVL90-2 tracked skid steer loader

EF9623 3 ‘12 New Holland L230 skid steer loader

DH0896 ’13 Sany SY215C excavator

DH0906 ’12 CAT TL943 telehandler

EK9227 ’99 JLG 6000S boom lift

DG5677 ‘77 Case C 1450 crawler loader

GW9783 ‘08 Ford F750 Super Duty bucket truck

LIN

GU9972 ‘18 CAT 315F L excavator

INVENTORY INCLUDES: dozers, d excavators, telehandle ers, skid steers, backhoes, boo om lifts, vibratory drum rollers, bucket trucks, cable plows, trenchers, rock saws, equipment trailers, semi trucks, dump trucks, flatbed trailers, t tracked loaders, whee el loaders, cranes, forklifts, caargo trailers, cable splicing tru uck and more. All items are sold ““A AS IS.” 10% buyers premium m applies. Aaron McKee TX T X Li Licensse #16401.

purppleewavee.com ccom BID NOW! N ! pu

Page 72 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Illinois to ‘Fast Track’ $25M in Infrastructure Grants Gov. J.B. Pritzker and the Illinois between $500,000 and $5 million. Funding Department of Commerce and Economic will be awarded on a rolling basis, with projOpportunity (DCEO) launched the $25 mil- ects submitted in under-served areas to be lion Fast-Track Public Infrastructure Grants given priority, the agency said. initiative on May 12 to accelerate work on “We recognize the unique challenge and planned public infrastructure projects around burdens that COVID-19 is placing on us all, the state this summer, as many local govern- and we are taking steps to provide relief to ments face lost revbusinesses and comenues, impacting their munities,” added Erin ability to finance these Guthrie, DCEO direcprojects. tor. “Through the Fast While COVID-19 Track Public places a unique ecoInfrastructure Grants nomic burden on Program, the admincommunities across istration will provide the state, this shift in a much-needed boost grant funding will for workers across the help accelerate constate as well as the struction on planned critical infrastructure Illinois DOT photo projects our state infrastructure projects, while helping The $25 million Fast-Track Public depends on.” return skilled labor to Infrastructure Grants initiative will Eligible grantees work, the governor accelerate work on planned public are local governments infrastructure projects around and other public entisaid in a statement. “This will keep key Illinois this summer. ties with significant public infrastructure projects in the pipeline, public infrastructure projects that could comand support the return of skilled labor to job mence work within 90 days of receiving sites for the busy summer season,” he said. award notice. The Fast-Track program leverages fundProjects eligible for grant funding must be ing from Rebuild Illinois, the state’s multi- public assets, must be permanent in nature year capital plan, for allocation to shovel- and must not have recurring project expensready projects just in time for the summer es, the governor’s office noted, while also construction season, DCEO noted. meeting “shovel-ready” criteria and minority Fast-Track also "front loads" a portion of an existing notice of funding, to expedite business participation requirements of funds available for grants ranging in size Illinois’ Business Enterprise Program. 

SCS Earns Safety Awards Illinois-based Stevenson Crane Service Inc. (SCS) recently earned two international awards for crane and rigging safety based on performance numbers that greatly exceeded industry standards. The Specialized Carriers & Rigging Association (SC&RA), an international trade association with more than 1,400 members from 46 nations, recognized SCS with the 2020 Crane & Rigging Group Safety Award and the Zero Accidents Award. Together, the two awards signify worldclass performance in crane and rigging safety. Firms across the United States and around the world submit dozens of entries to the SC&RA Awards competition. “Safety is our main focus every single day. Lives and livelihoods depend on it completely — it’s that simple. Earning these two awards is huge for our teams. It’s an affirma-

tion that what we’re doing exceeds global standards, and it reaffirms our commitment to keep doing even better,” said Ted Larkin, safety director of SCS. The Crane & Rigging Group Safety Award is given to companies with a Workers’ Compensation Modification Rate of 1.0 or less; Property Damage Frequency Rate of 1.0 or less; and an incident rate of 1.7 or less, which is less than the industry average of 3.4, as reported by the U.S. Bureau of Labor Statistics. The Crane & Rigging Group Zero Accidents Award is given to companies having zero recordable accidents or incidents during the previous year and a property damage frequency rate of 1.0 or less. For more information about the Specialized Carriers & Rigging Association, visit scranet.org. 

Construction Equipment Online Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 73

Youngblut Contracting, Inc.

7139 La Porte Road, Washburn, Iowa Bids will close on June 18 starting at 9:00 am Inspection: June 15-17 or by calling 319-296-1411 Over 700 lots to be sold only online.

Auctioneer’s note: After over 70 years in the construction business, Youngblut Contracting, Inc. will be closing its doors all remaining equipment and assets will be sold at auction. The machinery and equipment has had regular maintenance and most items were purchased new. This is an exceptional offering of very clean and well-maintained construction equipment, trucks, concrete forms and general support. Buyer’s Premium of 13% applies to all purchases. Bidding facilitated by www.bidspotter.com

Air compressor: Sullair 185DPQ-JD

High-pressure power washer: Hotsy 980SS Welder: Miller Bobcat 250

Trailers: 2016 Lamar utility trailer / 2008 Load Trail utility trailer / Behnke utility trailer Skid loader attachments: Skid loader grouser tracks / Kent KF4SS impact breaker / Lowe hydraulic auger

Skid loaders: 2013 John Deere 320D / 2012 John Deere 318D / 2006 John Deere 317 Symons concrete forms: Approx. 4898 sq. ft. of Symons wall form panels: 2x3, 2x4, 2x5, 2x6, 2x8. One of the cleanest sets of Forklifts: Gehl Dynalift DL-8H / Gehl 553 / Daewoo GA 25E / Symons forms you will find in the marketplace. Large quantity of Clark C25L filler panels and assorted hardware. Backhoe: John Deere 310D

Over 600 lots of general support merchandise: compaction, rebar cutters, core drills, generators, impact hammers, lasers Saws: Husqvarna FS 6600 / Stihl / Partner / Soff-Cut 310 with and survey instruments, hydraulic press, power trowels, case / Target Pac 4 / Soff-Cut G2000 welders, jacks, scaffolding, miscellaneous shop equipment, Scissor lifts: 2015 Skyjack SJIII-3219 / 2011 Skyjack SJIII-4632 power hand tools, manual tools, lifting and rigging supplies, safety harnesses, concrete hand tools, hydraulic floor jacks, toolboxes, grinders, hardware inventory, fasteners, office chairs, Straight trucks: 1999 Chevrolet C6500 / 1987 Ford L8000 filing cabinets Pickups: 2013 Chevrolet Silverado 2500 HD / 2008 Chevrolet Terms and conditions: All bidders must register online. Silverado 2500 HD / 2007 Chevrolet C 2500 / 2006 Chevrolet Silverado 2500 / 2000 Chevrolet Silverado 2500 with Western Registration is completed using bidspotter.com. A credit card snow plow is required for registration verification. Payment is in the form of cash, wire transfer, ACH payment or approved check. Credit Concrete screed: Allen Razorback cards are not acceptable for payment.

Arranged and conducted by:

Phone 319-266-3578 Cell 319-415-9850 www.equipmentmarketers.com

Page 74 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYONS & SON AUCTION

KOMATSU AMERICA CORP ..............................................................52,53

HOUSTON TX ................................................................................72

KPI-JCI ......................................................................................................33

ALEX PARIS CONTRACTING CO INC ......................................................9

KUBOTA EXCAVATOR..............................................................................42

ALLIED CONSTRUCTION PRODUCTS ..................................................31

LIUGONG CONSTRUCTION MACHINERY ............................................39

AMERICAN STATE EQUIPMENT ..............................................................7

MAGELLAN CONSTRUCTION ................................................................16

AMULET ..............................................................................................48,51

MCCANN INDUSTRIES INC ......................................................................6

ASCENDUM MACHINERY INC ................................................................11

METSO MINERAL CRUSHING ................................................................27

BANDIT INDUSTRIES INC ..................................................................24,25

METSO MINERALS SCREENING............................................................36

BANE-WELKER ..........................................................................................6

MID COUNTRY MACHINERY ..................................................................38

BARGAINS................................................................................................64

MUSTANG MFG........................................................................................40

BROOKS TRACTOR ................................................................................21

NORAM ................................................................................................44,45

CEG SCALE MODELS ............................................................................69

POWERSCREEN MW DEALER GROUP ................................................35

CONSTRUCTION EQUIPMENT GUIDE ............................................50,65

PURPLE WAVE AUCTION........................................................................71

CSTK JCB ................................................................................................19 CUSTOM MADE PRODUCTS ..................................................................40 DON SMOCK AUCTIONEERS ................................................................68 DOOSAN PORTABLE POWER ................................................................54 DUNN DEAL AUCTIONS ..........................................................................70 EQUIPMENT MARKETERS & APPRAISER ............................................73 ERB EQUIPMENT COMPANY..................................................................13 ESCO CORP ............................................................................................49 FABICK CAT................................................................................................2 FAE USA INC ............................................................................................34 FARM-RITE EQUIPMENT INC ..................................................................8 FELLING TRAILERS............................................................................62,63 FINKBINER EQUIPMENT CO ....................................................................7 FLANGE LOCK ........................................................................................16 FOLEY EQUIPMENT CO..........................................................................17

RACKERS EQUIPMENT CO ....................................................................31 RITCHIE BROS. AUCTIONEERS WILLISTON ND ..............................................................................67 UNRESERVED PUBLIC AUCTION ................................................75 ROAD BUILDERS MACHINERY ..............................................................15 ROLAND MACHINERY INC........................................................................5 ROSEN & COMPANY, INC. CLEVELAND OH ............................................................................70 RUFFRIDGE JOHNSON ..........................................................................32 SANY AMERICA INC ................................................................................40 SENNEBOGEN ........................................................................................29 SMITHCO..................................................................................................60 STAR EQUIPMENT LTD ............................................................................6 TEREX FUCHS ........................................................................................37

GARY CARLSON EQUIPMENT ..............................................................18

THE VICTOR L PHILLIPS CO ..................................................................19

GROVE WORLDWIDE ............................................................................43

TOWMASTER INC. ..................................................................................59

HITACHI CONSTRUCTION MACHINERY ..............................................55

WALLWORK TRUCK CENTER ................................................................60

HOWELL TRACTOR & EQUIPMENT CO ................................................76 ILLINOIS TRUCK & EQUIPMENT ..............................................................3

OHIO STATE SUPPLEMENT

IRAY AUCTIONS INC................................................................................70

BOBCAT ENTERPRISES ..........................................................................3

JEFF BELZER ..........................................................................................61

COLUMBUS EQUIPMENT CO ..................................................................8

JOHN DEERE ..........................................................................................41

EQUIPMENT CORP OF AMERICA ............................................................3

KIRBY SMITH ..........................................................................................12

GORILLA HAMMERS ................................................................................1

KLEEMANN ..............................................................................................28

JCB OF OHIO ............................................................................................5

KOBELCO CONSTRUCTION MACHINERY ......................................56,57

THE MCLEAN CO ......................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 30, 2020 • Page 75

Unrre eserrvved public equipment auctions

Equipmeent financing by equipment eexxperts.

Caterpillar 977H | Kansas, MO

Komatsu u WA250 WA250 3P 3PT | Kansas, MO

2015 Vermeer Vermeer D36x50II Na Navig gat ator Minneapolis, MN

2011 V Vermeer ermeer D100x120 Series II Chiicag go o, IL

Manitowoc M80W 88 Ton Ton | C Chicag go o, IL

2013 John D Deere 350G LC w/Movax Sonic SideG Grip SP-100 | Chicago, IL

Caterpillar TH255 4x4x4 5500 00 Lb Kansas, MO

Sterling LC & C Cottrel rell C-11-CS 52 Ft Chiicag go o, IL

2012 Vo Volvo A40F 6x6 | Chicag go o, IL

Grove R RT7 T745 45 Ton Ton 4x4 | Minneapolis, Minne MN

Caterpillar PM201 | Minneapo olis, MN

2019 Ashland 220TS4 | Minneapolis, MN

60,595+ items in 100+ auctions including Forrtt Worth, TX Orlando, FL Williston, ND Los Angeles, CA Kansas City, MO Sacrament ramento, CA

Jun 2 - 3 Jun 4 Jun 5 Jun 5 Jun 9 Jun 10

Las Vegas, NV Jun 12 Minneapolis, MN Jun 16 Chicago, IL Jun 18 Nashville, TN Jun 19 Norrth East E tR Regional Event vent Jun 23-24 North Fran ranklin, CT Jun 23-24

IMPOR RTTTA ANT MESSAGE: Due to COVID-19, all off ourr auctions are now online bidding only. Forr the most up-too-date infform ormation visit rbauction.com/covid-19

Online bidding infform ormation

Financing & leasing available

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in anyy off ou our auctions, create your accountt no now!

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See fu full auction & equipment listing gss at rbauction.com

Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701, Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728, Motor Vehicle Dealer License #DLR25867, Auctioneer Steve A Seykora # 74-19-006, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Auctioneer James L. Valentine #5623, Auctioneer Kevin L. Perry # 2763, Auction Company Bond #0470724, Auctioneer Trevor J. Moravec Bond # 0466225, Auctioneer Chad M. Johnson # 17668

Page 76 • May 30, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

THE FUTURE F TURE OF TRE EE CARE CARE Custom-engineerred tree care handler

GARY Y,, IN

800.852.8816

PE ERU, IL

81 15.224.3003

www.h w.howell welltractorr..com

24/7 parts and service