Midwest 5, March 6, 2021 by Construction Equipment Guide

Published Nationally

$3.00

Midwest Edition

March 6 2021 Vol. XXVII • No. 5

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

West Side Tractor Announces First Certified Rebuild Facility...12

Waukesha Water Utility

Volvo, Werk-Brau Help ‘Break Thru’ Tricky Demolition...29

Heavy machinery on site includes a Komatsu excavator PC 650 LC 8; a Komatsu WA 470; Cat excavator 325 zero turn; American Auger 48/54-900 Quick/Split; Cat D5K LGP; and a Cat 950M loader for pipe installation.

By Cindy Riley SmithCo Conquers New Markets With Customized Solutions...69

Table of Contents.............4

CEG CORRESPONDENT

Construction crews in Wisconsin are working on a $286 million project that’s designed to provide safe, sustainable and reli-

able water for years to come. The city of Waukesha is under a court order to be in full compliance with federal drinking water standards for radium by September 2023. “Waukesha’s current primary water source is a confined deep

aquifer,” said Waukesha Water Utility General Manager Daniel Duchniak. “The aquifer is severely drawn down, due to years of use in southeastern Wisconsin. Recharge of the aquifer is limited by the shale confining layer, making long-term

Aggregate and Recycling Section......................29-45

Has OSHA Gone Overboard?

Attachment Section ...................................55-59

Generic COVID Workplace Guidance Considered Redundant, Impractical for Industry

Trucks & Trailer Section ...................................69-78 Business Calendar..........80 Auction Section ........82-91 Advertisers Index ..........90

By Lucy Perry

Both ARTBA and the AGC have concerns about the late-January executive order President Joe Biden signed regarding safe workplaces during the COVID-19 pandemic. The guidance CEG CORRESPONDENT

follows Biden’s request that OSHA decide by March 15, 2021, whether an emergency temporary standard (ETS) is needed. The OSHA guidance details measures for limiting the coronavirus’ spread in any workplace. see OSHA page 60

reliance unsustainable. Also, as aquifer levels have declined, the levels of natural contaminants such as radium have increased. “Waukesha is outside of the Great Lakes basin, but is in a counsee PIPELINE page 68

Page 2 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2016 Wirtgen W210i / $445,000

2017 Cat M320F / $279,500

2014 Cat D8T / $355,000

SN: 15201144 Hours: 1,792

SN: FB200394 Hours: 88

SN: FCT01370 Hours: 5,623

2012 Cat D6NLGPARO / $189,500

2008 Cat D6TLGP / $99,000

2019 Cat D5K2XL / $132,500

SN: GHS01149 Hours: 3,795

SN: KJL00660 Hours: 9,650

SN: KW207480 Hours: 577

2017 Cat D3K2XLARO / $93,000

2017 Cat 299D2XHP / $60,000

2016 Cat 299D2 / $60,000

SN: KF202267 Hours: 160

SN: DX201664 Hours: 1,955

SN: FD200933 Hours: 1,413

636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 3

81 15-94 41-19 900 2017 JLG 660SJC Aerial Lift .... $82,500

2014 JLG 45 50AJ Aerial Lift .... $44,500

2016 JLG 800S Aerial Lift .......... $82,500

2016 Bell B40D Articulated A .... $159,500

Deutz TD2.9L Final Tier 4 diesel,, 67HP diesel, 66’ platform height, Sky Power, 8’ ba asket, 6’ jib, 20” wide tracks, 6.5 PSI, 55% grad-ability ability, 27,800 lbs., 1,463 hrs. ....................................................... ................... #ST228

Articulated Boom m Lift, Deutz D2.9L4 Tier 4 49HP diesel, 45’ platform heig ght, 4WD, 2 wheel steer, Sky Power, 6’ basket, 6’ jib, 33/1550x16.5 tires, 45% gradability, 14,200 lbs., 830 0 hrs. .................................... #ST127

Deutz TD2.9L 65HP Tier 4F diesel, 80’ platform m height, 4WD, ZKHHO VWHHU 6N\SRZHU ¶ EDVNHW [ IRDP ¿OOHG WLUHV cold weather start, inward self-closing gate, 45% 5% gradability, ...... #ST210 33,450 lbs., 1,128 hrs. ...................................

449HP Tier 4 diesel, 40.5 5 ton capacity (30 yds.), Allison 4600PR transmission, 6WD, 29.5R 25, on board weighing, hand safety rails, keyless start, tailgate included, 65,800 lbs. Emissions missions warranty 3,000 hrs. or 3/30/21., 4,603 hrs. ....................................... .................................. #BEL004

2018 Kobelco SK85CS-3E ......... $64,500

2012 Cat M3 322D Wheeled ....... $139,500

2012 Cat M322D Wheeled ........ .. $125,000

2009 Ta adano GR300XL-1 300XL-1 Crane . $145,000

17.5 rubber tracks, 7’ stick, 8’ push hblade, aux hydraulics mechanical quick coupler, ad lics, dditional counterweight, 18,700 lbs., 2,612 hrs., 0.99% for 60 Months. ..................................................................... ................. #KOB344

A/C, wheeled, Cat 6.6 173HP diesel, standard boom, 9’ 6” stick,, 20’ 7”” dig g depth, p , 11.00-20EM tires,, auxiliaryy hydraulics, 4 outriggers, triggers, anti drift valves, adjust. hydraulic sensitivityy, roading pkg., Cat variable pin grab hyd. coupler 78”” ditching bucket, pattern changer, window guard, 47,4 400 lbs.., 3,921 mi. ................. #11241

A/C, Cat 6.6 173HP diesel, VA A boom, 9’6” stick, 21’ 7” dig depth, 11.00 7 1 00-20EM 20EM tires, auxiliaryy hydraulics, multi-function hydraulics, 4 outriggers, anti drift valves, adjust hydraulic sensitivity, roading ding pkg., pattern changer, 47,400 lbs. , 5,125 hrs. ......... ........ #11363

30 ton capacity, cab with A/C, Cummins QSB6.7 215HP diesel, 101’ 4 section ection boom, 42’ jib jib, stabilizers, 20.5-25 tires, Ta adano electric load moment indicator system (AML-L), 4 WD/steer D/steer, dual winch, 2,216 hrs. ..................................................................... ................................... #10123

2015 Kenworth T880 Tri Axlee Semi . $105,000

2015 Cat CT T660 Ta andem Semi .. $69,500

525HP T4 diesel, Eaton Fuller 18 speed, s air lift intermediate tires, Kenworth air glide suspe ension, dual lockers, double frame, sliding 5th wheel platte, A/C, power windows, locks & mirrors, cruise contro ol, heated mirrors, air 628 mi. ....... #11346 ride seat & cab, block heater, 257,6

475HP, Eaton Fuller 13 Speed Man trans., 205” WB, 13,200 lb. front, 4 40,000 lb. rears, 53,200 GVWR, 3:90 ratio, air ride cab/susp., /susp., dual exhaust, sliding 5th wheel, A/C, cruise, power er wndws/locks, heated mirrors, dual high 95 mi. ............................................ #11369 back seats, 49,49

2018 Kenworth T880 Tandem Sem mi Unused FET PAID $109,500 450HP T4f diesel, Eaton Fuller 10 speed, double frame, Hendrickson air ride de suspension, GLႇ ORFN VOLGLQJ WK ZKHHO SODWH $ & FUXLVH FRQWURO KHDWHG mirrors, power mirrors, air ride cab, power windows, block heater, Namco split shaft pto. 140” Back off Cab to Center of First Axle, 168” Back of Cab to the Center er of Both Axles, 221” Back of Cab to the End of Frame., 0 mi. ...... #N6650

2018 Peterbilt 348 8 Wa ater Truck .. $104,500 300HP, Allison automatic atic transmission, 54,600 lb. GVWR, 14,600 lb. frnt, 40,000 lb. rear, 6.17 rear, 202” WB, Hendrickson Haulmax max suspension, air/exhaust EUDNHV LQWHUORFNLQJ GLႇ GRXEOH IUDPH &XUU\ JDO tank, 4”x3” pump, frnt, side/rear discharge, top/bottom ¿OO DLU YDOYH FQWUOV PL

sales@iltruck co sales@iltruck.co om • rental@iltruck k com • 320 Briscoe Drive, k.com Drive Morris Illino ois 60450

www.iltruck.com .iltruck com

Page 4 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

CONSTRUCTION JOBS ACCELERATE WITH AUTONOMOUS ROBOT USE

Mortenson and Black & Veatch are among the first partners to adopt Built Robotics’ autonomous guidance systems for construction projects. These systems upgrade common construction machinery to autonomous robots.

WEST SIDE TRACTOR ANNOUNCES FIRST CERTIFIED REBUILD FACILITY

CASE LAUNCHES NEW EQUIPMENT FINANCE WEBCAST

West Side Tractor Sales, the John Deere construction and forestry equipment dealership of northern Illinois and Indiana, announced that the Lisle, Ill., headquarters is now a John Deere Certified Rebuild Center.

Case Construction Equipment is launching CASE LIVE — a new broadcast and engagement platform with live events and educational sessions delivering topics that include equipment fleet management, acquisition strategies and more.

Global compact equipment leader Doosan Bobcat North America was awarded LEED Gold certification for the remodel and expansion of its corporate headquarters building located at 250 East Beaton Drive in West Fargo, N.D.

As a provider of infrastructure-related safety equipment and solutions, Arcosa Shoring Products strives to create long term value for its customers and stakeholders by promoting a culture that values ESG responsibility.

At a recent Make-A-Wish Day celebration held at the Vermeer Wisconsin facility in Madison, Wis., Edgar Contreras was presented with tools to turn his dream of owning and operating his own landscaping company into reality.

Effective Feb. 22, 2021, Clayton Whitesides will manage territory, which includes Missouri, Kansas, Oklahoma, Iowa, Nebraska, South Dakota, North Dakota, Montana and west Texas.

The $2.1 billion RPM Phase One project is the first part of CTA’s plan to rebuild the Red and Purple lines between Linden and Belmont. The Red Line is CTA’s busiest line, carrying nearly 70 million riders in 2019.

For more than 25 years SmithCo has been designing and manufacturing equipment for the construction, agriculture, waste and demolition and other sectors, providing custom solutions to clients.

LeeBoy engineers have added a few bells and whistles to the standard 8520B heavy-commercial asphalt paver that pay homage to the Raised on Blacktop crowd.

Yoder & Frey held its 47th annual Florida Auctions Feb. 10 through Feb. 13 in Kissimmee, Fla. The four-day auction featured a wide array of heavy equipment available to bidders.

Mecalac, a global designer, manufacturer and distributor of compact construction equipment for urban environments, welcomed five North American dealers to its network in 2020.

Ritchie Bros.’ conducted a hybrid-style event in Orlando, Fla. — equipment stored onsite with 100 percent online bidding to ensure safety, while adding new services and data tools to drive buyer demand.

DOOSAN BOBCAT HQ RECEIVES LEED GOLD CERTIFICATION

INDUSTRY PARTNERSHIP FULFILLS WISCONSIN MAN’S WISH

CTA’S $2.1B RPM IMPROVEMENT PROJECT BEGINS THIS SPRING

LEEBOY HAILS ‘RAISED ON BLACKTOP’ WITH SPECIAL PAVER

MECALAC ADDS FIVE DEALERS IN 2020, EXPANDS NA NETWORK

Founder, Publisher & CEO Midwest Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Joseph S. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

ARCOSA VIDEO: COMMITMENT TO ENVIRONMENTAL SOCIAL GOVERNANCE

TAKEUCHI HIRES WHITESIDES AS CENTRAL MIDWEST REGIONAL MGR.

SMITHCO CONQUERS NEW MARKETS WITH CUSTOMIZED SOLUTIONS YODER & FREY HOLDS ITS 47TH ANNUAL FLORIDA AUCTIONS

RITCHIE HOSTS ‘HYBRID-STYLE’ SIX-DAY ORLANDO, FLA., AUCTION

AGGREGATE PRODUCTION & RECYCLING SECTION

VOLVO, WERK-BRAU HELP ‘BREAK THRU’ TRICKY DEMOLITION

TEREX ADDS HYDROSCRUB 200 TO GREENLINE RANGE

30 32 36 40

SCREEN MACHINE OFFERS NIMBLE SOLUTION TO CUSTOMER’S REQUEST METSO EXPANDS RANGE OF MOBILE, STATIONARY CRUSHING SYSTEMS

TEARING DOWN TO REBUILD: OMAHA CO. TACKLES DEMO IN ITS HOME CITY SOOSAN AMERICA TAKES DIFFERENT ROCK DRILLING APPROACH

DEPARTMENTS

80 82

BUSINESS CALENDAR COMING AUCTIONS

55 55 66 70 78

PRINOTH M450e-1090 Mulcher Attachment LABOUNTY MSD Legend Series Shears KOMATSU D71-24 Dozer ISUZU 2022 F-Series FTR, FVR Trucks FELLING XF-110-3 HDG-L Trailer

EQUIPMENT

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

• National Sales Manager

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

MIDWEST EDITION

YouTube

773/769-4090 312/953-0375 jmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 5

V I S I T

Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers

2015 KOMATSU D155AX-8

$299,500

2018 KOMATSU WA320-8

2016 KOMATSU D61PX-24

$189,500

2015 WIRTGEN W220

2011 WIRTGEN W220

$249,500

2016 KOMATSU D51PXI-22

STK# KM19657, 3,884 HOURS, DEPERE, WI

$179,500

2018 KONECRANES SMC16-1200C $160,000

2017 KOMATSU PC390LC-11

$274,500

2018 KOMATSU PC210LC-11 $179,500

2017 KOMATSU WA380-8

$219,500

2016 KOMATSU WA500-7

2019 KOMATSU WA480-8

$350,000

STK# KM15298, 4324 HOURS, FRANKSVILLE, WI

STK# KM19412, 3,103 HOURS, CAPE GIRARDEAU, MO

STK# WG19030, 5,532 HOURS, SPRINGFIELD, IL

STK# KM20049, 692 HOURS, ESCANABA, MI

$159,500

STK# KM19637, 1278 HOURS, DEPERE, WI

$CALL

STK# WG19010, 3,964 HRS, SPRINGFIELD, IL

STK# KM19470, 1,219 HRS, BOLINGBROOK, IL

2015 KOMATSU 931.1

$275,000

2017 KOMATSU 845

2015 CAT 501HD

$210,000

2014 KOMATSU PC360LC-10 $199,500

STK# VT19025, 7,957 HOURS, ESCANABA, MI

STK# CT20002, 5,743 HRS, DEPERE, WI

STK# ZZ17298, 5 HOURS, PORTAGE, IN

$229,500

STK# KM19654, 8,317 HOURS, DEFOREST, WI

STK# KM19566, 2,744 HOURS, SPRINGFIELD, IL

STK# KM19044, 2,251 HOURS, SPRINGFIELD, IL

STK# ZECONS, 178 HOURS, SPRINGFIELD, IL

17 Roland Branch Locations in IL, IN, MI, MO, and WI

Used Sales (217) 789-7711

$339,500

STK# VT20014, 2,222 HOURS, EAU CLAIRE, WI

R O L A N D M A C H I N E R Y . C O M

Page 6 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com

View our complete Used & “Like New” inventory at McCannOnline.com

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110 2019 Case 621G loaders available Low hours, warranty, financing available Call today for details

Case SSL's snow returns available Call today for details

2015 Leeboy 8510C s/n 122257, 2750 2018 Carlson CP130, s/n 109DB8P, 520 Hours, Paving Width 8'-15', Heated screed, Hours, Contractor deluxe package $179,900 Legend Screed System ....................$54,900

McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana Merrillville 219-576-7800 Mishawaka* 574-406-6800 Schereville* 219-865-6545 2018 Takeuchi TB216, s/n 216101568, 450 Hours, ROPS, Tag Coupler, Blade, Aux Hyds, Rubber Tracks ..................................$24,000

2016 Takeuchi TB230, s/n 130001742, 325 Hours, ROPS, Tag Coupler, Blade, Aux Hyds, Rubber Tracks ..................................$29,900

2018 Takeuchi TB216, s/n 216101271, 300 Hours, rops, tag coupler, blade, aux hyds, rubber tracks ..........................$23,990

2018 Takeuchi TB235, s/n 123600647, 556 hours, Cab w/Ac, tag coupler, blade, aux hyds, rubber tracks ..........................$39,900

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

Michigan Marne* 616-371-7250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 7

GROVE RT855B – (’97), 55 Ton, 37' - 115' main boom and 35' - 60' of offsettable jib, 250 HP, C002337 ...$87,500

ROADTEC RX900 - ‘18, approx. 1050 hours, ROADTEC RP190 - ‘13, approx.. 6200 hrs. 12’6” drum, 24V night light package, ACE EZIV Carlson screed, Moba grade & slope conG&S, ext warranty ..............................$710,500 trols ......................................................$58,900

GROVE RT860B – (’99), 60 Ton, 9,120 hrs, C004493…$79,200

LIEBHERR R956 LITRONIC – (’19), AC/Heat, 2,095 hrs, C003914…$439,000 SAKAI R2H-2 - ’10 w/approx. 3850 hrs. antifreeze filled drums, #C002063............$39,850

PAVERS / ROAD WIDENERS BOMAG CR662RM - ‘15, 590 Hrs, Material Transfer w/Hopper, #C000763 ............$414,000 Midland SPD-8 - ‘19 w/250 Hrs, hyd. Variable strike-off, #C001697 ..........................$165,900 Midland SPR-6 - ‘18 w/700 Hrs, wash down, hyd. Variable strike-off, #C001737 ......$115,750 P.O.R. items may be on rent causing pricing and hours to vary.

BROOMS Roadtec FB100 - ‘16, approx.. 50 Hrs. Front mount, side-shift, A/C ............................$P.O.R.

MILLING MACHINES BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Out Conveyor......................................$174,000 BOMAG BM1200/35 - ‘15, 1150 Hrs, 4’ Drum, 3’ Also Available, Front Conveyor, #C000846 .... ..........................................................$298,000 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900 Roadtec RX-700 - ‘12 w/5000 Hrs., 7’2” drum, grade & slope controls, #C001978 ....$197,200

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

Large Selection of New & Used Equipment in Stock.

EXCAVATORS Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ................$P.O.R.

CRUSHING AND SCREENING ASTEC GT104 - ‘17, 71 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154 ............ ..............................................................$P.O.R. ASTEC GT165 - ‘17, 390 Hrs, 5’x16’ Top Deck, 5’x15’ Bottom Deck, 10.5 Cyd Hopper, #C001250 ................................................P.O.R.

ROLLERS Sakai GW750-2 - ‘14, 691 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ......*$99,950 Sakai R2H-2 - ‘09 w/approx. 2750 hrs. #C002062 ............................................$36,950 Sakai SW770HF - ‘17, w/930 Hrs, #C001144.... ............................................................$84,900 Sakai SW770HF - ‘17, 450 Hrs, 67” high frequency, #C001168............................$96,000 *Comes with any remaining standard and 3 year extended power train warranty.

Contact Chuck or Jason in Illinois

1-800-307-0221

crhodes@finkbiner.com jzeibert@finkbiner.com

www.finkbiner.com

MANITOWOC 10000A-1 – (’13), 100 Ton, 3,890 hrs, C000660...$619,000

AGGREGATE EQUIPMENT ASTEC GT205S, (’17), Triple Deck Crawler Mounted Screen Plant. #C003398............................................$CALL JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000 KPI FT4250CC, (‘11) Track Mounted Impact Crusher, #C003741 ................................................................$CALL KPI GT36X80, (‘16) Track Mounted Stacker, #C002294 ..............................................................................$CALL

CRANES GROVE RT650E, (’14) 50-Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$319,000 GROVE RT765E-2, (’14), 65-Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ........................................$339,000 GROVE TMS900E, (’05), 90-Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ..........................................$CALL

LOADERS AND EXCAVATORS: LIEBHERR L586, (‘18) Air conditioning, Joystick steering/standard steering wheel, amber beacon, emergency steering pump, #C003370......................................................................................................................$408,322 LIEBHERR LH60M, (‘19) Cab elevator, Overload warning system, Generator 25kw, Control device for magnet kit, wheeled and joystick steering, Industrial straight mono boom 31'2", Industrial Stick, stick end sharply angled, 28'10", #C004008 ......................................................................................................................$795,000 LIEBHERR LR636, (‘18) 3.25cyd bucket w/teeth & segments. Front and rear aux. hydraulics for 4 in 1 bucket, winch or ripper. 3 year/6000 hour full machine warranty, #C001745 ....................................................$249,700 LIEBHERR A902 SPEEDER, (‘98) 10 x 20 Tires, 4 Outriggers, Aux Hyd, #C001293..................................$CALL LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R920 COMPACT LITRONIC, (‘18), w/Werk-brau pin grabber coupler, medium & high pressure aux. hydraullic circuits, pattern changer, #C003330 ............................................................................................$POR LIEBHERR R946LC, (’14), Long Reach, 60’ Reach at Grade, 2.15 yd bkt. #C000938 ................................$POR

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Matthew Pehler at:

mpehler@amstate.com or mobile 1-414-719-8700 or 1-800-236-6900 Visit us at: www.amstate.com

Page 8 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Jobs Accelerate With Autonomous Robot Use By Ken Liebeskind

The Built Robotics ATL-74R autonomous compact track loader.

CEG CORRESPONDENT

Mortenson and Black & Veatch are among the first two partners to adopt Built Robotics’ autonomous guidance systems for construction projects. Mortenson began its partnership with Built Robotics in 2019 and Black & Veatch incorporated Built Robotics in its Ignite Cleantech Accelerator program, which highlighted companies that are advancing clean tech technologies. Built Robotics is a San Francisco firm that introduced artificial intelligence guidance systems that upgrade common construction machinery, including dozers, excavators and skid steers into fully autonomous robots that are transforming the way traditional construction projects are executed. Mortenson used these robots on five projects in four states, from a solar project in California to wind farms in Colorado, Kansas and Missouri. Black & Veatch used robots on a solar energy project in Florida. Explaining one of the jobs, Derek Smith, Mortenson’s lean innovation manager for civil work, said, “We dug a number of wind turbine foundations robotically for a client in eastern Colorado. Digging big holes is a repetitive task and it was a great opportunity to incorporate robotics into it. We can attach Built’s hardware run-

ning their software on our excavators, then plug in the foundation specs to dig specific holes. The excavators will then autonomously The Built Robotics AX-162 autonomous excavator.

A Built Robotics engineer works on a hardware kit.

dig each foundation to the exact dimensions.” Built Robotics employees came to the job site to oversee the opera-

tion. “They monitored the equipment to make sure it was running safely and smoothly,” Smith said. Tyler Parker, Black & Veatch’s business optimization manager for global renewable energy, said the company utilized Built Robotics hardware and software applications to transform its excavators into robots that dug trenches at a solar energy site in Florida. “The goal of the project was to dig 1,000 linear feet of trenches and we accomplished that with autonomous technology,” he said. Parker said the use of robots accelerates the operation.

“If I have 50 operators, they can operate 50 pieces of equipment. With an auto fleet, I can have them operate more than one piece of equipment at a time, which means more projects, which is good.” Built Robotics uses proprietary software with multiple layers of safety systems to operate within a predetermined geofence using augmented GPS, video and other sensors to safely operate equipment that performs earthmoving work. “We provide software and simple hardware that gets upgraded and applied to construction equipsee ROBOTICS page 88

Built Robotics uses proprietary software (interface seen here) with multiple layers of safety systems to operate within a predetermined geofence using augmented GPS, video and other sensors to safely operate equipment that performs earthmoving work.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 9

NPK Hammers, All Sizes JD 644K, JRB Coupler, for All Makes. Inspected Embedded Scale, #108463 and Well Maintained, GH4 ............................$136,000 –GH18

JD 410E, 40 Tone, Bed Liner, Warranty til 11/2021, #112389..............$239,000

JD 750K, LGP, 34” Pads, JD 650K, LGP, 124” PAT Blade, Warranty til 12/2022, 156” Blade, Ripper, #118075 ..............$119,000 #119716..............$139,000

JD 470GLC, 12’ 10” Arm, JD 245GLC, 9’ 7” Arm, JD 135G, 9’ 11” Arm, Hyd Hyd Coupler, #115624 ...... Thumb, #118868 ................ 36” Pads, Warranty, ............................$121,000 #118074..............$279,000 ............................$159,500

JD 310SJ, Cab, Air, 4x4, JD 210GLC, Hyd Thumb, Ext Hoe, #113401.............. Warranty til 10/2021, ..............................$49,500 #121033..............$155,000

JD 210GLC, 9’7” Arm, Aux JD 644K, Cab, Air, QC, Bomag BW177D-4, 66” JD 250GLC, 11’ 10” Arm, Harlo HP 6500, 4x4, Hyd, #114487 ....$129,000 3rd Spool Aux, #108584 .... Hyd Coupler, Hyd Thumb, 6,500lb, #120388 .............. Smooth Drum, #111402 .... ............................$139,000 #120428..............$122,000 ..............................$59,500 ..............................$59,000

JD 624K, Ride, Front Diff Lock, #119216 ......$89,500

JD 770G, 14’ Blade, Aux Hyd, #117795 ....$159,000

JD 672G, Low Cab, Air, JD 544K, Cab, Air, Coupler, JD 844K, Cab, Air, 14’ Blade, #102755............ #117132..............$126,000 Joystick, #113618 .............. ............................$129,000 ............................$159,500

Page 10 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 11

NORTH DAKOTA TA Williston 701.577.1249 Fargo 701.271.2360 TENNESSEE Kno oxville xville 865.525.1845 Chattanooga 423 308 7940 423.308.7940 NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710 SOUTH CAROLINA Piedmont 864.704.1060 Columbia 803.791.0740 Charleston 843.414.1120 GEORGIA Buford 678.318.9500 Savannah 912.964.8079

POWERFUL EXCAVA AVATORS FOR YOUR TOUGGHEST JOBS. JOBS

Macon 478.200.3300

Sttay up and running with high-quality machines m and unrivaled support. Exp perience reliable power, power efficiency and performance from m the industry industry’ss best cabs. cabs Our Volvo excavators are e designed to reduce fuel consumption and maximize uptime to help you lower your operating costs — and d you can work confidently knowing your Ascendum team is always there when you need us. Ta alk k to us today and learn how Volvo excavators can deliver more reliability on the job and boost your botttom line. Contact your nearest Ascendum location today.

ascendummachinery.com ascendummachinery.c . om .c

Page 12 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

West Side Tractor Announces First Certified Rebuild Facility West Side Tractor Sales, the John Deere construction and forestry equipment dealership of northern Illinois and Indiana, announced that the Lisle, Ill., headquarters is now a John Deere Certified Rebuild Center. Opened in September 2020, the Lisle service and repair facility was designed with this new certification in mind. West Side is one of a select group of John Deere dealers with a Certified Rebuild Center-designated location within the organization. “Our customers demand topnotch support from start to finish. We use a customized approach utilizing our team, programs and tooling to make sure we’re hitting that mark for their unique operations and expectations,” said Steve Deller, corporate product support manager of West Side. “Machine rebuild is another way that we can provide a tailored solution that may be the right fit option for their business. Certification in this area is rigorous and requires a commitment of time and resources from a dealership. Our customers can trust that the West Side team is In addition to the 16-bay shop, there is a clean room with craning capaprepared to provide them bilities specifically for rebuilds. communicated to the customer, a equipment rebuilds already, this is with a high-quality experience.” For businesses with a produc- customized rebuild plan is devel- the first facility that has designated tion class machine nearing end-of- oped based on the customer’s tooling and spaces for that purpose. life status, they would consider needs for that piece of equipment. In addition to the 16-bay shop, rebuild as a solution to extend the The rebuild is then conducted by there is a clean room with craning machine life at a fraction of the certified technicians. The result is a capabilities specifically for cost of buying new. John Deere machine that meets the customer’s rebuilds. The John Deere certified Certified Rebuild Centers use con- expectations for performance, technicians at Lisle also have comsistent processes to inspect the con- durability and cost, according to pleted dedicated machine-specific training before they are selected to dition of a machine and assess its the company. While the West Side team has be a part of the ReLife team. performance. Once that machine’s West Side has specialized prospecific needs are understood and completed several production class

West Side is one of a select group of John Deere dealers with a Certified Rebuild Center-designated location within the organization.

West Side Tractor Sales, the John Deere construction and forestry equipment dealership for northern Illinois and Indiana, announced that the Lisle, Ill., headquarters is now a John Deere Certified Rebuild Center.

grams and resources tailored to heavy equipment working in high production settings, including PM Plus — West Side’s preventative maintenance plan — as well as a robust fleet monitoring service. JDLink data is monitored through the dealership’s triage portal and analyzed by West Side “watchdogs” and machine performance reporting is provided. The dealership also invests in local parts inventory designed to support the high uptime that customers expect. In the event a machine down situation occurs, West Side is prepared with loaner machines to keep their operation up and running. “Managing a fleet of production

class equipment in some of the most demanding applications out there has a whole list of challenges for our customers and requires an elevated level of expertise and support from a heavy equipment partner,” said Brian Benck, vice president of sales and third-generation ownership. “We have teams of professionals with the knowledge and experience that support these types of operations every day throughout our territory. As John Deere continues to innovate with new technologies and products, we look forward to growing this area of our business in the years ahead.” For more information, visit westsidetractorsales.com. 

The John Deere certified technicians at Lisle also have completed dedicated machine-specific training before they are selected to be a part of the ReLife team.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 13

#73969, 2014 TAKEUCHI TS70R | CAB/AC | 550 HOURS ....................................................$31,500

#92964, 2017 TAKEUCHI TL8 | CAB/AC | 800 HOURS ....................................................$38,500

#93013, 2013 TAKEUCHI TL12 | CAB/AC | 2805 HOURS ..................................................$36,500

#92975, 2017 TAKEUCHI TL12R2 | CAB/AC | 1525 HOURS ..........................................$53,500

#92987, 2018 BOBCAT T595 | CAB/AC | HIGH FLOW | 1,475 HOURS ............................$42,500

#92946, 2006 DEERE 644J | CAB/AC | GP BUCKET| 21,150 HOURS ................................$44,500

#92989, 2016 CASE TV380 | CAB/AC | MULTIPURPOSE BUCKET | 500 HOURS ..........$49,500

#93010, 2002 CAT 963C | CAB/AC |GP BUCKET | 13,340 ....................................................$49,500

#92913, 2005 INGERSOLL-RAND SD77DX , 66 INCH SMOOT DRUM WITH SHELL KIT| 2,450 HOURS ....................................................$36,500

#83096, 2008 KOMATSU PC138US-8 | 4400 HOURS | BLADE ....................................$69,500

#92926, 2013 KOMATSU PC490LC-10 | 8750 HOURS | AUX HYD | QC ......................$109,000

#92802, 2008 KOMATSU PC138USLC-8 | 6,300 HOURS | RUBBER PADS | QC ................$55,500

#93006, 2008 CAT D6K LGP | CAB/AC, 6 WAY BLADE| 4900 HOURS ............................$74,500

#92983, 2013 KOMATSU D65WX-16 | CAB/AC | RIPPER | SIGMA | 6700 HOURS ............$99,500

#92767, 2013 KOMATSU D65EX-17 | SWEEPS, SIGMA BLADE , 4950 HOURS ..............$125,000

#93026, 2016 CAT D5K2 XL | PAT BLADE | RIPPER | 3,600 HOURS ........................$109,500

Page 14 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OPEN HOUSES Willmar, MN April 2 Long Prairie, MN April 9 St. Cloud, MN April 16 Dassel, MN April 24

The Bobcat® L23 small articulated loader is small enough to fit in small lots, backyards and other tight jobsites.

New Bobcat T76 Track Machine with Diamond 60” Tree Cutting Head

New 15-ton E145, Bobcat’s Largest Excavator in Stock with full line of all Bobcat Excavators on site and ready to rent or own.

New Bobcat Commercial & Residential Mowers in Stock!

Largest Selection in the Midwest!

Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000

Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500

Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000

New In Stock Bobcat MT100’s

Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Farm-Rite Dassel Farm-Rite Willmar Farm-Rite St. Cloud Farm-Rite Long Prairie

Authorized Bobcat Dealer U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281 19612 US-71 • Long Prairie, MN 56347 866/514-0982

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 15

USE S D EQUIPMENT .com

TRUSTED MACHINES FROM A TRUSTED DEALER. R

2014 CATERPILLAR TL1255C, ID# TUC0294, SN DHW00823, 3662 HOURS........................................$75,400

2014 CATERPILLAR CS64B, ID# RUC0170, SN C6400126, 2859 HOURS ..........................................$86,900

2013 CATERPILLAR 299D, ID# TUC0293, SN GTC00370, 3855 HOURS..........................................$40,500

2017 CATERPILLAR 259D, ID# TUC0275, SN FTL12116, 2278 HOURS ............................................$39,900

2015 CATERPILLAR 120M2AWD, ID# TUC0097, SN R9W00176, 4081 HOURS................................$138,600

2016 CATERPILLAR 349FL, ID# PGN0402, SN BZ200836, 5279 HOURS ........................................$186,250

2016 CATERPILLAR 299D2, ID# TUC0182, SN DX200632, 2616 HOURS ..........................................$48,400

2013 CATERPILLAR 140M2AWD, ID# PUC0258, SN R9G00273, 6610 HOURS ................................$137,290

2017 CATERPILLAR 242D, ID# TUC0290, SN DZT03351, 2546 HOURS ..........................................$26,900

2017 CATERPILLAR 330FL, ID# RUC0161, SN MBX00564, 3573 HOURS ......................................$145,500

2012 CATERPILLAR 242B3, ID# TUC0291, SRS01918, 2876 HOURS ............................................$19,300

2016 CATERPILLAR TL642D, ID# 7CR6220, SN ML800406, 1051 HOURS ..........................................$66,220

2015 CATERPILLAR 416F2, ID# 5CR5802, SN HWB00300, 3082 H0URS ..........................................$57,480

2014 CATERPILLAR D6TLGP, ID# SUR0021, SN KSB01629, 5875 HOURS ........................................$180,800

2015 CATERPILLAR D6NLGP, ID# HGN0619, SN PBA02615, 4503 HOURS ........................................$144,900

2017 CATERPILLAR 735C, ID# PGN0653, SN TFJ00247, 3788 HOURS ..........................................$299,400

Page 16 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 17

Page 18 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Doosan Bobcat HQ Receives LEED Gold Certification

Achieving the gold certification, the second highest rating available, makes the Doosan Bobcat facility one of 12 structures in the state of North Dakota to achieve LEED Gold and the second Doosan Bobcat building in the state to earn LEED recognition.

Global compact equipment tems for indoor environmental quality. leader Doosan Bobcat North • Decreased energy consumption America was awarded LEED Gold by 35 percent through high performcertification for the remodel and ance building systems, operating expansion of its corporate headquarmethods and light automation. ters building located at 250 East • Use of green power renewable Beaton Drive in West Fargo, N.D. energy to offset 53 percent of the Leadership in Energy and building’s energy costs. Environmental Design (LEED) cer• Implemented a new irrigation tification is the most widely used system for all landscaped areas and green building rating system in the low-volume interior fixtures, resultworld and an international symbol ing in a 41 percent reduction in of excellence. water use. “As a leader in the industry with • Incorporated a walking path and high standards for quality and innoopen green space with native prairie vation, we are extremely proud to grasses and trees to encourage pubreceive LEED Gold certification lic use and pedestrian activity and have our headquarters reflect • Utilized recycling practices to those values,” said Mike divert 77 percent of onsite generated Ballweber, president of Doosan construction waste from the landfill Bobcat North America. “Our goal and utilized recycled materials for is to provide a space that operates 12 percent of building materials. sustainably and supports our In 2017, Doosan Bobcat completed the $9.5 million expansion and remodeling of its North America Ballweber added, “We continue headquarters, which was originally built in 2000. employees with a healthy and to make investments in our people inspiring workplace.” and facilities. This award represents Achieving the gold certification, the sec- $9.5 million expansion and remodeling of tion and operations practices that improve our commitment to serve as a community ond highest rating available, makes the its North America headquarters, which was environmental and human health. Fargo- partner and manage our environmental footDoosan Bobcat facility one of 12 structures originally built in 2000. The most recent based Shultz + Associates Architects served print where our employees, dealers and cusin the state of North Dakota to achieve project doubled the square footage of the as the architect for the remodeling and tomers live and work.” LEED Gold and the second Doosan Bobcat office building to 110,000 sq. ft., providing expansion of the headquarters building and Nationwide, Doosan Bobcat continues to building in the state to earn LEED recogni- an open, modern office environment to delivery of LEED features that earned the demonstrate its commitment to its facilities, tion. The Doosan Bobcat Acceleration house employees working in administra- project LEED Gold certification. employees and the communities in which it Specific sustainability highlights of operates. In 2019, the company invested $26 Center in Bismarck, N.D. — a key engineer- tive, finance, IT, engineering, product manDoosan Bobcat’s LEED Gold certification million into expanding its production facility ing research and development facility for agement, sales and marketing functions. Developed by the U.S. Green Building include: Bobcat equipment — received LEED certiin Litchfield, Minn., $11 million in • Upgrades to geothermal HVAC and Statesville, N.C., and more than $17 million Council (USGBC), LEED certification fication in 2018. In 2017, Doosan Bobcat completed the ensures buildings employ design, construc- installation of ventilation monitoring sys- at Gwinner, N.D. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 19

Contact Rollie Aspenson (Used Equipment Manager)

at 608-220-1723 rollieaspenson@ brookstractor.com

See our entire used inventory at www.brookstractor.com Six Locations in Wisconsin to serve you! Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Plover (Stevens Point) • Mt. Pleasant (Racine) 2016 JOHN DEERE 850K

2017 JOHN DEERE 670G LC

2019 JOHN DEERE 470G LC

2018 JOHN DEERE 844K

Stk #C95223, Cab w/ AC, 36" Pads, 13'9" Stk #U288642, Cab w/ AC, Medium-Long Stk #U689760, 2643 Hrs, Cab w/ AC, Joy Stk #U288642, Cab w/ AC, Low Ground Stick Steer, Ride Control, Front Diff Lock, 29.5 Pressure, 36" Pads, Hydrostatic Trans, Power- Arm, CWRD, Quick Coupler, 80" Bucket, 3543 Arm, Standard Boom, Wide Pads, 34" Pads, Angle-Tilt, 168" Blade, Drawbar, 4406 Hrs...... Hrs ............$399,000 WITH WARRANTY Coupler, 54" Bucket, 2206 Hrs ...................... Tires, General Purpose Bkt............................ ................$349,000 WITH WARRANTY ................$299,000 WITH WARRANTY ................$179,000 WITH WARRANTY

2018 JOHN DEERE 325G

Stk #C96096, Cab Enclosure, A/C, EH Controls, Air Ride Seat, Aux Hydraulics, Ride Control, 2 Speed, Self-Leveling, Rubber Tracks, 78" Bucket, 1111 Hrs $42,500 WITH WARRANTY

2018 JOHN DEERE 160G LC

2018 JOHN DEERE 672GP

2015 JOHN DEERE 333E

Stk #C94573, Cab w/ AC, Cntrl Pattern Select, Stk #C94503-2, Cab w/ AC, 14' Blade, 17.50 Stk #C94439, Cab Enclosure, A/C, EH Controls, Medium-Long Arm, Sd Boom, Long Track, 28" Tires, All Wheel Drive, Push Block .................. Air Ride Seat, Aux Hyds, Ride Control, 2 Spd, Pads, Aux Hyds, Coupler w/ Bkt, 48" Bucket, ................$259,000 WITH WARRANTY 84" Bkt, Reversing Fan, 1471 Hrs ..$43,500 967 Hrs ....$169,000 WITH WARRANTY

2016 CASE 621F XR

2005 CATERPILLAR 930G

Stk #C95533, 2430 Hrs, Cab w/ AC, Ride Control, 20.5 Tires, High Lift Boom, New Radials, General Purpose Bkt ......$109,000

Stk #C94675, 6321 Hrs, Cab w/ AC, 3 Spool, Aux Hydraulics, Quick Coupler, General Purpose Bkt, Forks, Used, On Lot....$62,500

2012 JOHN DEERE 724K

2013 JOHN DEERE 700K

2017 JOHN DEERE 245G LC

1988 CATERPILLAR 140G

Stk #C95730, 3739 Hrs, Cab/AC, Long Arm, Stk #C94625, Cab w/o AC, Tall Cab, 13' Wide Pad, Coupler, Hyd. Thumb, Bucket .......... Blade, 14.00 Tires, Aux Hydraulics, Snow ................................................$145,000 Wing, 3932 Hrs ..........................$59,500

2008 ETNYRE RF50TD3

Stk #C95089, Mechanical Folding Gooseneck, Stk #C95678-2, 8445 Hrs, Cab/AC, Dual Diff Stk #C94949, Cab w/ AC, Low Ground Lock, Ride Control, Quick Coupler, GP Bucket .. Pressure, 30" Pads, Hydrostatic Trans, Power- 10' Wide, 22' Bed, Air Brakes ......$25,000 ................................................$105,000 Angle-Tilt, 132'' Blade, 3370 Hrs .................. ................................................$119,500

2019 JOHN DEERE 35G

Stk #C96009, Cab w/ AC, Long Arm, 12" Rubber Tracks, 24" Bucket, Aux Hydraulics, Blade, Hydraulic Thumb, 338 Hrs .................. ..................$43,500 WITH WARRANTY

We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.

Page 20 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SOLD NEAR N YOU.

Your Y our local D Doosan® dealer is you ur source ffor or sales, par a ts and service.

Learn more at doosanequipment.c . om

Doosan® and the Doosan a logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2021 Doosan Infracore North America, LLC. All rights reserved.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 21

Authorized Doosan Dealers

IOWA BROWN’S HEAVY EQUIPMENT 515-232-8456 doosandealers.com/Ames

INDIANA

KANSAS

BOBCAT OF ANDERSON

CENTRAL POWER SYSTEMS & SERVICES

765-643-4222 doosandealers.com/Anderson-IN

785-462-8211 doosandealers.com/Colby

B & W EQUIPMENT RTL EQUIPMENT 515-986-0262 doosandealers.com/Grimes 319-857-4045 doosandealers.com/Swisher

KENTUCKY BOBCAT OF BOWLING GREEN 270-842-4253 doosandealers.com/Bowling-Green

620-792-1361 doosandealers.com/Great-Bend

BOBCAT OF BLOOMINGTON

785-825-8291 doosandealers.com/Salina

812-775-1470 doosandealers.com/Columbus

MICHIGAN

847-844-4131 doosandealers.com/Gilberts

BOBCAT OF EVANSVILLE

CARLETON EQUIPMENT COMPANY

BOBCAT OF COLUMBUS

812-422-8200 doosandealers.com/Evansville

616-877-3388 doosandealers.com/Byron-Center 586-463-3333 doosandealers.com/Chesterfield

BOBCAT ENTERPRISES

BOBCAT OF KOKOMO 765-628-2800 doosandealers.com/Greentown

614-863-1300 doosandealers.com/Reynoldsburg

BOBCAT OF INDY 317-787-2201 doosandealers.com/Indianapolis

GIBSON MACHINERY

269-343-2943 doosandealers.com/Kalamazoo

402-895-6660 doosandealers.com/Omaha

CENTRAL NEBRASKA BOBCAT

ELLENS EQUIPMENT 989-436-8181 doosandealers.com/Ithaca

MISSOURI

RONSON EQUIPMENT CO.

BOBCAT OF COLUMBIA

219-696-5680 doosandealers.com/Lowell

231-825-2416 doosandealers.com/McBain

WISCONSIN

BOBCAT OF ST. LOUIS

MINNESOTA

SWIDERSKI EQUIPMENT

636-240-9020 doosandealers.com/O’Fallon

LANO EQUIPMENT

715-623-4668 doosandealers.com/Antigo

THECO

NEBRASKA BOBCAT OF OMAHA

308-384-9222 doosandealers.com/Grand-Island

BOBCAT OF INDY NORTH

952-445-6310 doosandealers.com/Shakopee

BOBCAT OF ST. LOUIS 618-397-1847 doosandealers.com/Fairview-Heights

989-777-6666 doosandealers.com/Saginaw

317-769-4946 doosandealers.com/Whitestown

636-225-2900 doosandealers.com/Valley-Park

SARGENT’S EQUIP & REPAIR SERVICES 708-758-2062 doosandealers.com/Chicago-Heights

513-874-8945 doosandealers.com/Hamilton

573-886-9435 doosandealers.com/Columbia-MO

217-525-0349 doosandealers.com/Springfield-IL

316-789-7370 doosandealers.com/Wichita

OHIO

440-439-4000 doosandealers.com/Oakwood-Village

BOBCAT OF MARION 618-985-8920 doosandealers.com/Carterville

BOBCAT OF SPRINGFIELD

800-242-4819 doosandealers.com/Fort-Wayne

812-287-8042 doosandealers.com/Bloomington

ILLINOIS

715-693-3015 doosandealers.com/Mosinee

CENTRAL POWER SYSTEMS & SERVICES

763-428-2260 doosandealers.com/Big-Lake

715-669-5255 doosandealers.com/Thorp

816-415-6700 doosandealers.com/Liberty

218-829-2800 doosandealers.com/Brainerd

715-258-3266 doosandealers.com/Waupaca

417-865-0505 doosandealers.com/Springfield-MO

763-428-2260 doosandealers.com/St.-Michael

715-675-2391 doosandealers.com/Wausau

CONTACT YOUR LOCAL DOOSAN ® DEALER TODAY.

925-606-2451 doosandealers.com/Hastings 925-606-2451 doosandealers.com/Kearney

NORTH DAKOTA BOBCAT OF MANDAN 701-663-0903 doosandealers.com/Mandan

IRONHIDE EQUIPMENT 701-662-5331 doosandealers.com/Devils-Lake 701-772-5006 doosandealers.com/Grand-Forks 701-572-5050 doosandealers.com/Williston

Page 22 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Industry Partnership Fulfills Wisconsin Man’s Wish At a recent Make-A-Wish Day celebration held at the Vermeer Wisconsin facility in Madison, Wis., Edgar Contreras was presented with the tools of the trade he needs to turn his dream of owning and operating his own landscaping company into a reality. Contreras is a 19-year-old from Milwaukee who is battling thyroid cancer. Orchestrated by Make-A-Wish Wisconsin, Contreras received a new Vermeer RTX250 pedestrian trencher, as well as a trailer to haul it with; an extended service package; an update to his truck’s towing package; a generator; personal protective equipment (PPE); and a variety of hand tools. Donations were made by Vermeer Wisconsin, Vermeer Corporation and KS Energy Services Inc. While presenting Contreras with his new tools of the trade, Chris Brouwers of KS Energy and Bear Reynolds of Vermeer Wisconsin expressed their commitment to helping Contreras on this career path by offering operator training, business development consulting

and help navigating the many challenges of starting a company. “Everyone at KS Energy and the Klumb family supports Make-AWish Wisconsin and the organization’s efforts to fulfill dreams of children and their families,” said Brouwers. “This unique wish is near and dear to our hearts. Edgar is a wonderful person who has risen to the challenges life has put in his way, and we’re confident he will be successful in the landscaping industry.” According to Forrest Doolen, director of marketing and communications of Make-A-Wish Wisconsin, the dream of starting a business is one Contreras shared with their team during his cancer treatment, but given the nature of his request, it took some time to grant. “When Edgar said he wanted a trencher, we reached out to KS Energy, who in turn looped in the team at Vermeer Wisconsin and Vermeer Corporation,” he explained. “The three organizations worked together to make sure

Orchestrated by Make-A-Wish Wisconsin, Edgar Contreras received a new Vermeer RTX250 pedestrian trencher, as well as a trailer to haul it with; an extended service package; an update to his truck’s towing package; a generator; personal protective equipment (PPE); and a variety of hand tools. Donations were made by Vermeer Wisconsin, Vermeer Corporation and KS Energy Services Inc.

they were providing more than just a piece of equipment — but also giving him the tools he needs to establish a business and support

along the way.” Growing up helping his father install irrigation systems is what spurred Contreras’ dream of own-

ing his own landscaping business. After much discussion with his family, he determined that owning a trencher would be the best way to get started. After turning over the keys of the Vermeer trencher to Contreras, Reynolds assured him that the team at Vermeer Wisconsin and Contreras’ business would have a relationship for many years to come. He went on to tell Contreras that everyone at the dealership will be there to help him along the way. “Everything from helping with the normal business things like service, parts and training support, to being a sounding board for business-related decisions, or just mentorship along the way, we’ll be here,” he said. Make-A-Wish Wisconsin is currently working to make sure more than 450 children receive their wishes through donors’ generosity. For more information, visit vermeer.com, vermeerwisconsin.com, ksenergy.us and wisconsin.wish.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 23

563-8 872-44112 112

Bellevue (Dubuque), ubuque), Iowa sales@jjscheckel.com jscheckel.com RENT OR

BUY!

2002 CA ATT D11R - $1855,000

2009 CA ATT D10T - $$458,000 ,

7PZ High g Horse series, Runs R andd oper p ates a to spec p , RJG S#, 1 Owner since new w,, 8,300 hours on $683,000 bl d w// twin tilt, SSS ripper ipp r.. A/C ld use Documented CAT Dealer Complet U-blade A/C, HHeaat. Could p e Rebuild, SS ripper pp r,, paint, otherwise very straight om good home home. U blade, Twin Twin tilt tilt, Well maintain U/C. i h tractor frrom i i ed, Like-new U/C

RENT OR

BUY!

RENT OR

2004 CA ATT D10TT - $$350,000 ,

RJG Series, 23,037 hours, h 4,701 idle dl hours hours, h Single S shank ripper pp r,, U blade with th ttwin Tilt. A/C, Heat. CAT AATT dealer main Seerviced and ready to go. d l maintained,

RENT OR

2015 CA ATT D8T - $$274,000 ,

RENT OR

BUY!

2013 CA ATT D9T - $618,000

hrs, 1,861 at idle dl , only l 4,539 actual 5,250 Hours, 517 hrs att idle. dl U Blade, l d MS Ripper pp r,, GPS 6,400 total framee hrs iff steerr,, p atingg hrs. SU Blade, MS Ripper pp r,, EErops, DDiff Grade control readyy. Original pain p t, straigh ght & clean. oper O i i l Paint, P i Service history since i new. Rent/Buy. Documented maintenance andd oil sample history. Original l hist

BUY!

2014 CA ATT D6T LGP VP PA AT - $188,000 2012 CA ATT D6T LGP VP PA AT - $139,000 2018 CA ATT 390FL,, A02851 A - $68 $688,000 2018 CA ATT 390FL 390FL, L,, A02819 - $628,000 ,

2017 CA CAT 374FL - $48 $488,000

5,873 Hours, 1,293 at idle. CAT AT Acc A ugr g ade, AROO,, GPS 8,500 Hours, 2,700 at idle. CAT AT Ac Accugr g ade d , AROO,, GPS 3,100 Hrs, 2 Year Year pparts/labor /l r Cat warrantyy. 27’ Boom, 5,780 Totall hrs, h 1,5500 aat idle. dle 2 Year Year par p ts/labor /l b CCat 4,445 Hrs. 2 Year Yearr parts/labor CAT warrantyy. 26’ Boom, ready. Erops p , A/C, Diff steerr,, VPPAAT 6-wayy blade, MS ripper pp r.. readyy. Erops p , A/C, Diff steerr,, GGooodd undercarriage g. 11’2”” Stick S , 96” Yardd buckett. 1 Ownerr.. Ex Excellent U/C. Warrantyy remains. 1 Ow wnerr.. Super p straigh 13’7”” Stick, S k Super up clean 1 owner condition, 6”” 8 Yar ight. 27’ Boom, i Full /Lease or BBuyy.. Original, i l super clean machine. Reent/Lease or BBuyy.. d li EExcellent U/C. service history and S h & clean, with history. Rent/Le Straight Full documented history,y, as nice nic as they come. 14’ Stickk, 77”” BBucket, Aux hydraulics, ndd oilil samples samples. Rent/Lease or Buyy..

RENT OR

BUY!

RENT OR

BUY!

2012 Komatsuu PC80 PC800LC-8 - $358 $358,000 2006 Komatsu PC800LC C-8 - $33 $338,000 ,

Reputa p tion 1-owner machine, Full histooryy since new, 7,200 Original g hrs, Reputa p tion machine, m Straigh g t, 10,0,400 T hrs, Straigh g t, clean, fresh pai p int.11’ S clean, original gi l. 11’1 11’10” 400 Total 11’10” 0” Stick. 10”” SStick i k, 72”” Bucket, Goodd U/C w/ d Komatsu dealer teested & inspected. Quick coupler p r,, 66”” Bucket, B k New trackk grooups, 36”” pads. pads 32”” tr trackk pads.

RENT OR

BUY!

(2)2014 ) CA ATT 740B’s 740B’ - $238 $2388,,000 EA. 66,500 500 Hours, H Original g ppaint, Servicee hhistory,y, Oil samples, FFullll workk order compppleted. Goodd tirires es, Work W ready. Rent/Leasee or Buy.

B POWERTRAIN PLUS REBUILDS

RENT

RENT OR

BUY!

2013 CA ATT 329EL 329EEL - $114,000 $ ,

4,700 Hours, New 54”” bu bbuck cket k , 10’6” ’ ” Stick, S k Fullyy

loaded, Longg and Wide UC, PPattern changerr,, Excellent Ex ll

condition, o O Original paint. Rent/Lease or Buy.

BUY!

((2)2015 ) CA ATT 982M’ 9882M’s - $$258,000 , EA.

RENT OR

BUY!

2015 CA ATT 980M - $258,000

77,800 800 Hours, H Agg Aggrega g te t handler dler additions additions. 1 Ownerr,, Aggr ggrega g te handdler pack p kage g , 6,200 Hours, H 1 Ownerr,, Good radial rubber Good bbber bbb r,, OOn board scales, Ride control. o d radial d l rubb b r,, 7.5 yardd GP bucket. Ride control. h come. Rent/Lease or Buy. Full documented history,y, as nice nic as they come. Full history,y, as niccee as they

(4)2014-2015 ) Volvvo A40G’s $228 $228,000 ,000 - $24 $248,,000 EA.

(4)2013-2016 ) CA ATT 740B’ 740B’s $168 EA. 168,,00000 - $188,000 188,000 ,

V RSIONS HIGH REACH CONVE

RUM ROLLERBLADES HOLMES SMOOTH DR

2015 CA ATT 836K 8 - $448,000 ,

10,900 Total frame hou h urs, 5,978 att idle dl , only ly 4,922 of i actual “in-oper p ation”” hours. Very goodd feet. SService 5,600-7,600 600 hrs, h Original igi l pain i t, Ex Excellent ll radial di tires, 11,500 Hours, Dealer D mainta i ained, i d Service S hi history,y, Oil O history since new. All systems testedd to t OEM spec. Factory tailgates, 1 ownerr.. RRennt/Lease or Buy. samples, Full work orrder der done donne. Good tires, Tailgates.

2006 CA ATT 825H - $338,000

800 Hrs on CAT AT-dealer l complet pl e powertrain rebuildi Excellent E ell feet. Original engine g , torqque, tr transmisison. g Buy. paint. de, Excellent! Rent/Lease or Buy i Tilt blad blade

RENT OR

BUY!

NEW! Ready to ship!

2006 CA ATT D10T Rebuild In n Process - $785,000. Zero hour Powertrain Plus, OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

2017 CA ATT 349FL UHD D - $458,000 ,

Zero hours on custom Ul Ultraa-High High H gh RReachh Demolition l Conversion. 96’6” Total reach, ui k attach boom & h Quick lines, Hydraulic tilt cab, Highest quality pkg.

visit

Holmes 11F - $23,00 $23,0 ,000 / 16F - $29,000

2015 CA ATT 627K - $$288 2888,000

9,100 hours, Just inn from original g ownerr,, PPush 2 Models, 11’’ or 16’’ cutting width. Made in Iowa. Pullll, Original igi l pain int, 33.25+29 33 25 29 Ru R bber bb r,, Full F ll Construction ggrade d , extremee dduty. Foor hhaull roadd & site d doc umen t ed hist hi or y , under d d dealer l care a since new. d h lleveling l , compacting & sealing ling dir ddi t prior to rain event.

JJSccheckel.com

and w watch our new company video! deo!

2018 CA AT RM500B - $580 $580,000

978 Hours. Remaining mainingg 2 year y parts/service par factoryy Cat Warrantyy. 1 Owner Ow machine, hine Universal rotor for both Asphhalt Reclamation or Soil Mixing.

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FL, L, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel.com | www. jjsscheckel.com scheckel com | follow us ffor orr daily updates:

Page 24 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CTA’s $2.1B RPM Improvement Project Begins This Spring Mayor Lori Lightfoot and the Chicago Transit Authority (CTA) unveiled the designs for four Red Line stations that will be fully reconstructed as part of the Red and Purple Modernization (RPM) Phase One project, the largest transit investment in CTA history and the latest among several Red Line improvement projects over the last decade. CTA will rebuild the Lawrence, Argyle, Berwyn and Bryn Mawr rail stations, transforming each into new, modern, larger and fully accessible stations to customers with disabilities. The new stations will include elevators and escalators, wider platforms and vastly improved amenities, better serving the more than four million customers who enter the stations each year. The $2.1 billion RPM Phase One project is the first part of CTA’s plan to rebuild the Red and Purple lines between Linden and Belmont. Phase One work will benefit the entire Red Line by addressing chronic overcrowding and delays while modernizing infrastructure that is more than a century old. The Red Line is CTA’s busiest line, carrying nearly 70 million riders in 2019. “Today’s station design unveilings mark a historic day for Chicago transit as we continue to rebuild and revamp CTA’s busiest line, the Red Line,” said Lightfoot. “Public transit is the great connector of our city and with this monumental project, we are building on our obligation to ensure Chicago’s transportation network is accessible, reliable and affordable so our residents remain connected to jobs, education and opportunity.” “CTA’s Red Line forms the backbone of our city and is a critical transportation link for Chicagoans, including essential workers, who need efficient, reliable and modern service each and every day,” said Dorval Carter, CTA president. “The RPM project’s benefits extend beyond the project area by improving transit operations and by providing opportunities across the city through training, jobs and contract opportunities that will be a model for future CTA projects like the Red Line Extension.”

Most of the new track structure in the Lawrence to Bryn Mawr project area will be built with pre-cast concrete segments that are created off-site, trucked in and installed with a gantry system.

RPM Phase One RPM Phase One Project includes three major components: • Reconstruction of the Lawrence, Argyle, Berwyn and Bryn Mawr Red Line stations into larger, 100 percent accessible stations and replacement of track structure totaling 6 track-mi. that is a century old. Reconstruction work will begin in spring 2021. The new stations are expected to open by the end of 2024. • New Red-Purple Bypass construction (expected completion by the end of 2021), followed by the reconstruction of Red and Purple Line track structure between Belmont and Newport/Cornelia (expected completion by the end of 2024). • Installation of a new signal system on 23 track mi. between Howard and Belmont that, similar to roadway traffic signals, will improve train flow and service reliability. CTA will fully reconstruct the Lawrence, Argyle, Berwyn and

Bryn Mawr stations as well as rebuild and repair adjacent track structures. CTA stations are important cornerstones of the communities they serve, which informed the design of the stations. In developing the designs, CTA with construction contractor Walsh Fluor Design-Build Team and architectural firm EXP worked closely with people who live and work in the neighborhoods around the stations to develop designs to create an identity for each station, with each responding to the context and the culture of the local neighborhoods. Lawrence, Berwyn Stations CTA anticipates the start of reconstruction work to begin in spring 2021 starting with demolition of existing structures. At that time, the Lawrence and Berwyn stations will close. CTA will open temporary rail stations at Argyle and Bryn Mawr to provide customers with access to Red Line

service so that the original stationhouses can be reconstructed. CTA will rebuild the tracks and stations between Lawrence and Bryn Mawr in two stages: • Northbound Red and Purple Line tracks to be rebuilt in Stage A (2021-2022) • Southbound tracks to be reconstructed in Stage B (2022-2024) The track structure between Lawrence and Bryn Mawr, including viaducts and embankment structures, will be rebuilt and/or modernized as part of RPM. The first step of construction will include demolition of stations and track structures starting in spring 2021. Most of the new track structure in the Lawrence to Bryn Mawr project area will be built with precast concrete segments that are created off-site, trucked in and installed with a gantry system. The RPM Program, which will be done in multiple phases, will rebuild the 9.6-mi. stretch of Red and Purple Line track structure and

stations on the north side that are a century old. RPM will replace aging infrastructure; increase CTA’s capacity to increase train service as needed; and improve our service for customers with more reliable, comfortable service. Future phases of RPM have not yet been announced and are currently unfunded. Red Line Investment RPM is just the latest in a number of Red Line projects announced and/or completed in the last decade, including: • Red Line South Reconstruction • Red North Station Interim Improvements • 95th/Dan Ryan Station and Terminal Improvements • Wilson Station Reconstruction • Clark/Division Station Renovation • Loyola Station Renovation • Red Line Extension For more information, visit transitchicago.com/RPM. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 25

GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113

GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449

www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426

Page 26 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Case 980B Excavator, 1:35 scale - $150

Caterpillar 226B2 Skid Steer Loader w/work tools, 1:32 scale - $50

Caterpillar 836G Landfill Compactor, 1:50 scale - $70

Caterpillar D7E Track-Type Tractor, 1:50 scale - $115

Michigan 320L Wheel Loader, 1:50 scale - $35

JCB 525-58 Loadall, 1:35 scale - $35

Komatsu WB140 Backhoe/Loader w/ Attachments, 1:50 scale - $85

Caterpillar 245 Excavator, 1:50 scale - $60

Volvo L35G Wheel Loader, 1:50 scale - $75

Allis Chalmers TS300 Cable Operated Motor Scraper, 1:50 scale - $110

Caterpillar D4,2T Crawler w/Letourneau Blade and Hyster Winch, 1:16 scale - $235

Bobcat 7753 Skid Steer Loader, 1:25 scale - $50

International TD-24 w/ Cable Blade, 1:25 scale - $140

Conexpo 2008 Silver Edition AEM Wheel Loader - $75

Shipping and Handling Included

Bucyrus Erie 22-B Cable Backhoe, 1:50 scale - $225

Bucyrus Erie 22-B Cable Shovel, 1:50 scale - $225

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 27

KANSAS CITY • JOPLIN • WICHITA TOPEKA • GARDEN CITY

816-241-9290 www.VLPCO.com

SALES • PARTS • SERVICE

2016 Case SR270 Wheeled Skid Steer, EQ0005709 ............................................$42,900

2015 Case 580SN WT, Pilot Controls, 1180 HRS, EQ0004234, Kansas City, MO ......$79,000

2014 Case SR210, Mechanical H Pattern, 1,000 HRS, EQ0003198, Garden City, KS ........$31,850

2014 Case CX300C, 2010 HRS, EQ0003165, Kansas City, MO ..................................$174,900

2019 Case CX130D, 304.7 HRS, EQ0010984 ...... ............................................................$149,900

2015 Case 580SN Backhoe, 979.50 HRS, EQ0004326 ............................................$84,900

2015 Case 821F, 2,434 HRS, EQ0004257, Kansas City, MO ..................................$198,500

2019 Case TR270, 23.7 HRS, EQ0009453, Kansas City, MO ....................................$48,900

Raised on Blacktop...

LeeBoy Gives Nod to Show For those born, or pulled, into the busi- seats embroidered with the Raised on ness, the fast-paced life of paving often Blacktop logo “feels like you’re going into battle.” Now, • Stylized Raised on Blacktop decal these road warriors have their own rallying • Carbon-fiber embellished wing decal cry. • A larger American flag decal Matt Stanley created Raised on Blacktop • A weather-proof ticket/phone box as a way to tap into the pride and passion of • Various shovel/rake carrier options others like him. As with any true movement, • Engraved serialized badge Raised on Blacktop has no shortage of mer• An optional custom lighting package chandise to help promote its cause. The For more information, visit online store features shirts, hats, decals, kids LeeBoy.com/RaisedOnBlacktop8520.  clothing and more. And now it will be adding the biggest (and most expensive) promotional item to date — a special edition Raised on Blacktop paver from LeeBoy. LeeBoy engineers have added a few bells and whistles to the standard 8520B heavy-commercial asphalt paver that pay homage to the Raised on Blacktop crowd LeeBoy including: engineers have • An exclusive gray added a few bells and whispaint scheme tles to the standard 8520B heavy-commercial asphalt paver • Red operators’ that pay homage to the Raised on Blacktop crowd.

Page 28 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ROCK K CO COMMAN NDER Mo odel JD1400E-II

´7KH 6PDUWHVW 7KLQJ RQ 2XU 'ULLOO LV WKH 2SHUDWRUµ

Soosan America LLC 732 N. N English Station Rd. Louisville, KY40223

5920 North Lindbergh Blvd. Hazelwood, MO 63042 314-895-9500 www.patkelly.com

Phone: 502-244-0004

www.soos soosanamerica.ccom

Mecalac Adds Five Dealers in 2020, Expands NA Network Mecalac, a global designer, manufacturer and distributor of compact construction equipment for urban environments, welcomed five North American dealers to its network in 2020. The new dealers significantly expand Mecalac’s coverage across the eastern United States, as well as provide a toehold for the company on the West Coast and in several key Canadian markets. These partnerships increase access and customer support for existing Mecalac customers, and help bring the company’s innovative lineup to new regions across the United States, Canada and Latin America. “Mecalac is always looking for innovative ways to address industry challenges and improve our customers’ productivity,” said Peter Bigwood, general manager of Mecalac North America. “We aren’t happy with the status quo, and believe our dealers shouldn’t be either. We’re building relationships with dealers who believe in our approach, share our values and aren’t afraid of new

solutions. We’re excited about our growing North American network and look forward to increasing access to Mecalac products and services across the continent.” Helping connect Mecalac with contractors in central Pennsylvania is Wood’s CRW Corporation. With nearly 60 years of industry experience, this relationship-driven heavy equipment distributor services the northeastern United States through locations in Vermont, Massachusetts, New York and in Carlisle, Pa. Illinois-based Hall Equipment will help with sales and service for contractors in the greater St. Louis region. Hall specializes in excavation equipment and has more than 20 years of experience in the construction, aggregate and mining industries. Trekker Group will expand Mecalac’s coverage throughout Florida. The group originated in Puerto Rico more than 66 years ago and reached mainland United States in 2010. Trekker Tractor, the equipment sales rental and service

Mecalac welcomed five North American dealers to its network in 2020, expanding coverage across the United States, Canada and Latin America.

division, will offer Mecalac products at six locations throughout Florida. The company provides equipment, tools and accessories, supplies and materials for a variety of industries. On the West Coast, Fontana, Calif.-based Scott Equipment is a full-service dealership featuring new and used equipment sales, fully equipped shop/field service department capabilities, an experi-

enced parts department and a wide range of equipment rental machines. The family-owned dealership has been serving the Southern California heavy construction market for nearly 50 years with two locations. Gear Equipment is dedicated to bringing new technology to Canadian contractors, making it an ideal partner for Mecalac. Through

locations in Ontario and soon in British Columbia, Gear Equipment will offer Mecalac’s complete range of compact and powerful excavators, both tracked and wheeled, as well as loaders and site dumpers. “As a relatively new player in the North American market, we’re working hard to make a lasting first impression,” Bigwood said. “We believe in the game-changing productivity of our machines. Our dealers do, too. Together, we’ll help every contractor in North America recognize the extraordinary versatility Mecalac machines provide.” Each of these new dealers will work with Mecalac to provide customers the most efficient and ideal machine for the job at hand. Their offerings include Mecalac’s line of crawler skid-excavators — the MCR Series — as well as the company’s MWR Series of wheeled excavators and AS Series swing loaders. For more information, visit www.mecalac.com. 

Pages 29-45

Aggregate Production and Recycling Section Volvo, Werk-Brau Help ‘Break Thru’ Tricky Demolition

For more information on crushing, screening and recycling equipment, visit CEG’s Web site at www.constructionequipmentguide.com.

(L-R): Juan Delgadillo, operator; Roger Lisy, president of Break Thru Enterprises; and TJ Lisy, project manager/safety director of Break Thru Enterprises show off the new Volvo excavator purchased from Alta Equipment Company.

By Katherine Devlin

Volvo EC480EL Excavator Specs • Gross power: 373 hp • At engine speed: 1,800 rpm • Bucket capacity: 2.03 to 4.32 cu. yds. • Lifting capacity, along undercarriage: 38,040 lbs. • At reach/height: 20/5 ft. • Max. digging reach: 39 ft. 10 in. • Max. digging depth: 25 ft. 8 in. • Breakout force, SAE J1179 (normal): 51,616 lbf • Breakout force, SAE J1179 (boost): 56,472 lbf • Tear out force, SAE J1179 (normal): 44,085 lbf • Tear out force, SAE J1179 (boost): 48,311 lbf • Overall width: 11 ft. 11 in. • Tail swing radius: 12ft. 6 in.

CEG EDITORIAL ASSISTANT

Break Thru Enterprises Inc. of Lombard, Ill., was presented with an opportunity to work on a rather challenging project. The job, located in Bannockburn, Ill., required a mix of demolition practices — office gut, selective structural removal and total building removal. The project involved three buildings: the 17,000-sq.-ft. center structure (original building); the 12,000-sq.ft. east addition; and the 5,000-sq.-ft. west addition. “The original center building needed to be removed down to the slab, but the steel columns needed to remain for reuse to build a second story,” said Bill

O’Neill, project manager of Break Thru Enterprises. “The challenge of this portion of the project was the building had a basement with a cast-in-place slab.” Team Effort Roger Lisy, president of Break Thru, knew what size and class of excavator was needed for the job and contacted a dealer he was familiar with for advice. The team at Alta Equipment in Orland Park, Ill., was able to help. Mark Cristino and Jeff Ader, prime sales account managers, and Ron Anderson, demonstration operator, made sure the options and how the unit would be equipped met Break Thru’s needs in the demolition market. It was decided the Volvo EC480EL excavator

with an operating weight of 100,310 to 117,510 lbs. was the machine that fit. Along with the excavator, the proper attachments were necessary. The Alta team recommended a Werk-Brau 54-in. severe duty bucket with teeth and the Werk-Brau 3/2 stiff arm grapple with 120-in. jaw opening, 48-in. wide. High Production, Fuel Efficiency Volvo designed this machine to reduce fuel consumption and increase productivity, with ECO mode and a new hydraulic control system that uses intelligent technology. Its work mode system now includes G4 mode, which optimizes performance. Operators can see DEMOLITION page 38

Page 30 • March 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Screen Machine Offers Nimble Solution to Customer’s Request JKN Concrete Crushing in Kearney, Neb., needed a solution. As a recycler of road material, it was in pursuit of the cleanest material possible. JKN wanted to purchase a Screen Machine Spyder 514TS screening plant to pair with its Screen Machine 4043T impact crusher, but asked if a magnet could be placed on the 514TS. Permanent magnets have been a fixture on mobile crushing plants for decades, to remove rebar, tramp iron and other metal items from freshly crushed materials. But they have rarely been an option with mobile screening plants, according to Screen Machine. “There are very few mobile screening plants on the market that have a permanently affixed magnet,” said John Lamprinakos, president The magnet attachment was fabricated by Screen and CEO of Screen Machine production and affixed to the Spyder Machine. “But when JKN 514TS, tested and then shipped to Nebraska — Concrete Crushing posed all within a few weeks. the question, our team mobilized to meet the request. The sales team Screen Machine Industries LLC, an American manufacturer of crushing and screening machines for 55 years, now offers a permanent magnet as an option on its gathered all the details and Spyder 516T, Spyder 514TS and Spyder 514TS3 screening plants. then met with our engineering and production responsive to our customers.” ing. teams to ensure we could “This was a win-win situation, for JKN do it and do it in a timely Customer Support Concrete Crushing and for Screen manner. JKN Concrete As the Spyder 514TS made its way to Machine,” said Lamprinakos. “JKN got the Crushing has a lot of prodKearney, Scott Wagner, Screen Machine set-up they wanted and needed, and they are uct to process and wanted product support specialist, boarded a plane very pleased with the productivity they are to move fast.” to head there as well. He helped the JKN experiencing. Screen Machine was able to The Screen Machine engineering team was able to create exactly he said. “It would have been easy to put off Concrete Crushing crew fine-tune the showcase how we can pivot to accommowhat JKN Concrete Crushing needed. The the request until after New Year’s Day, or to 4043T-514TS pairing, and the duo went for- date our customers’ needs and further divermagnet attachment was fabricated by Screen simply turn it down entirely. But that is not ward with full-scale production. The result sify our product line.” For more information, visit screenmaMachine production and affixed to the how we operate. Our strength is our willing- was virtually metal-free product in a variety Spyder 514TS, tested and then shipped to ness to take on new challenges and be of sizes that JKN provides for road resurfac- chine.com.  Nebraska — all within a few weeks. Screen Machine now offers a permanent magnet as an option on its Spyder 516T, Spyder 514TS and Spyder 514TS3 screening plants. Team Work “At JKN Concrete Crushing, we utilize American-made products whenever we can. Screen Machine allowed us to maintain our commitment to the ‘Made in USA’ philosophy,” said James Nickman, CEO of JKN Concrete Crushing. “We were able to meet and convey our ideas for the magnet we wanted based on our past designs, and they quickly implemented production. Within a few weeks we had the 514TS up and running. Screen Machine’s accessibility, collaboration and interaction are huge factors of why we chose Screen Machine.” Lamprinakos praised the efforts of team Screen Machine in putting the needs of the customer first and delivering a quality product that met their needs. “All of this took place over the holidays,”

The result of the magnet was virtually metal-free product in a variety of sizes that JKN provides for road resurfacing.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2021 • Page 31

www.aisequip.com m

IN N V ITATION 03.17.2 . 021

33600 N Grand River Av Ave L i Lansing, MI 48906 48906 5177--321-8000

Sa aginaw 4600 46 00 AIS Drive Di Bridgepo ort, MI 48722 722 989-777 9897777-0090 0090 Grand Rapids Travverse City 600 44th Street SW 8300 M-7 -72 East G Grand Rapids, MI 49 49548 Williamsb burg, MI 4969 49690 231--2267 267-5060 616-538538--2400 West s Detroit Northeast Detroit 56 6555 Pontiac P Trail 65809 Gratiot Av Avenue New Hud dson, MI 4816 655 Leno ox x, MI 48050 248--4377--8121 586--7727 27--750 5022 800-4 457 57--8121

www.butlermachinery.c y com 3402 02 36th St SW Fargo, ND 58014 701--2280-3100 800--7726--77475 3630 Miriam Av Ave Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-4 45656-1400 1201 S 46th St Grand G d Forks, F k ND 58201 701--77 7775-4 4238

1505 Hwyy 2, Bypass E Minot, ND 58701 701-8 852-3508 4950 E High Highway 12 Aberdee en, SD 5774 401 60505--22 225-6 62240 3601 Deadwood Av Ave N Rapid City C , SD 57770 02 60505-34 42-4850 2-4 2057 0571 Tru uck Stop A Avve Pierre e, SD 57750 501 60505--22 2244-5400 3201 N Louise Av Ave Sioux Fa alls SD 5771107 alls, 605--336-3010

www.centralsands.co om 4219 E 50th St • Des Moines, IA A 50317 50 800--2247 47-2400 • 515-964-8 8600

www.rbscott.com 1011 Short St • Eau Claire, WI 54 47701 715-832-9792

www.roadbuildersmachine ery.com y 1001 S 7th St Kansas City, KS 913-371-3822 4115 S 90th St Omaha, NE 4022-331-9 92200

5601 Fle etcher Av Ave Linccoln, NE 40202-3325-044 477 4949 49 Ju Juer uergen Rd Grand Island, NE 308-3384--2620

Nordtrack™ N ™ Virtual Launch a Liiveroo and om Laun nch event | Virtual demo os | Expert presentatio ons See the t extended range LIVE: live.mogroup.com

1303 S Chestnut St Norfolk, NE 40202-316-4640

mogroup o .com

Page 32 • March 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Outotec Expands Range of Mobile, Stationary Crushing Systems Lineup Metso Outotec is complementing its line of mobile and modular stationary crushing solutions with a sizer option specially designed for soft ore and aggregate applications. The new additions to Metso Outotec’s mobile Lokotrack product line are equipped with Komatsu’s sizer technology, and are available in five models ranging from 500 to 4,500 tons per hour. Metso Outotec’s recently launched modular FITTM crushing stations also are available with sizer configurations. Both the mobile and modular solutions were engineered in collaboration with Komatsu. The first Lokotrack sizer plant is already in operation in South-East Asia. “New concentration technologies and strict environmental norms make it economically viable to process such deposits and stocks that were not possible to handle profitably earlier. However, the characteristics of soft

The new additions to Metso Outotec’s mobile Lokotrack product line are equipped with Komatsu’s sizer technology, and are available in five models ranging from 500 to 4,500 tons per hour.

ores like low abrasiveness and high moisture content require a different equipment configuration than when crushing hard ore. To provide leading solutions for our customers processing soft ore, we’re now combining our expertise in mobile and semi-mobile crushing with Komatsu’s sizing knowhow,” said Julius Mäkelä, vice president, mid-size and mobile crushers at Metso Outotec. “Komatsu is excited about the opportunity to partner with Metso Outotec to provide soft ore crushing solutions. Komatsu’s Joy sizers are

well known in the industry and they’ve proven their efficiency and reliability in various applications. The combination of Metso Outotec’s Lokotrack and FITTM Station with our sizers provide a unique and superior solution for soft ore and rock crushing,” said John McCarthy, sizer product manager at Komatsu. Metso Outotec’s Lokotrack mobile sizers are designed for safe operation and easy application. When combined with the Lokolink and Conveying Systems, Metso Outotec can provide a truckless solution right from the quarry to the concentrating or cement plant. For more information, visit mogroup.com. 

Terex Adds HydroScrub 200 to Range

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640

West Chicago, IL 630-293-0606

Mokena, IL 708-596-8050

Merrillville, IN 219-381-3006

Wauconda, IL 847-526-4255

www.atlasbobcat.com

Yorkville, IL 630-553-0150

1200 East Highway 13 Burnsville, MN 55337 952-894-0894

588 Outpost Circle Hudson, WI 54016 715-531-0801

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

www.tristatebobcat.com

Cincinnati, OH 513-874-8945

Reynoldsburg, OH 614-863-1300

Mt. Orab, OH 937-444-3865

Zanesville, OH 740-313-0087

Hillard, OH 614-876-1116

Lexington, KY 859-254-3936 www.bobcat-ent.com

Terex Washing Systems has added the HydroScrub 200 to Barry McMenamin, business line director — Terex its Greenline range of products that has been specifically tai- Washing Systems said, “We recognize that not only is there lored to work in wash recycling applications. a huge growth in the wash recycling sector, but there is ever The HydroScrub 200 uses the core principals of a high- increasing diversity in the range of materials end users need performance log-washer with new features that offer dynam- to wash. ic adjustment and control, with flexibility that enables the “The HydroScrub 200 offers the convenience of having customer to adjust parameters to optimize performance and one machine that can be easily adjusted to process different suit various types of feed material. feed materials and provides opportunities for expansion — Comprising of hydro floatation water injection, integrated expansion in the range of cuspre and post screens, a high-volume trash removal screen tomers you can provide a service and single-pass processing for various feed for, and expansion in terms of materials, the HydroScrub 200 has proven the volume of material they can performance in wash recycling process. It is the epitome of applications ranging from C&D what we strive to offer through Muck away applications — our Greenline range of products where the challenge is liberating — balanced, end-to-end prothe valuable aggregates and light cessing systems that enables our organics from difficult to break down customers to wash wisely.” fines and insoluble clay — to For more information, visit “High Volume Lights” https://www.terex.com/washapplications, where ing/en/.  the level of attrition required to clean aggregates is less, Consisting of hydro floatation water injection, integrated pre and but high volumes post screens, a high-volume trash demand more water to removal screen and single-pass processing for create the hydro separavarious feed materials, the HydroScrub 200 has tion required to float these performance in wash recycling applications ranging from off effectively, according to C&D Muck away applications to “High Volume Lights” applications. the manufacturer.

Bobcat of Indy 2935 Bluff Road Indianapolis, IN 46225 866-442-3052

4489 S Indianapolis, Road Whitestown, IN 317-769-4946

2075 E CR 67 Anderson, IN 765-643-4222

2002 West 3rd Street Bloomington, IN 812-287-8042

www.bobcatofindy.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2021 • Page 33

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration.

INTIMIDAT ATO OR 15XP 115” Capacity p ity tyy Hand-Feed Chiipper pp

LARGE EQUIPMENT DEALERS THE BEAST 2460XP Trrack Horizontal Grinder

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255

M MODEL BT BTC-300 B Trrack Carri rie ier

M MODEL 3590XL Whole Trree Chipper W pp

IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p

CHIP GRIN ND SHREED ED

BBAND ANDDIIT

675 667 750 Millbrook Rd. Rd • Remus, Remus MI 49340 • 1-800-952-0178 FIND US ONLINE WWW.BANDITCHIPPERS.COM

MODEL SG-75 Trrackk Stump S p Grinder Gi d

www.lec1.com

Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer

Page 34 • March 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Yo our Source S f Sandvik for S d ik C Crushing and Sc Screening Equipment E

We ser serve all a of Wisconsin, Northern Illino ois, and Michiga an’s Upper Penin nsula We offer the full line of Sandvik jaw crushers, impactors, con ne crushers, screens, a and scalpers for qua arrying and rock e exca xcava ation projects. With sm mall footprints and trackked undercarriages, Sandvik machines lett you process aggregatte right on the jobsite, saving yyou the cost of ttransporting p g material to o a fixed site. Our dedicated crushing and screen ning sales and support rep is Marty Waldorf Waldo orf, and he is ready to help you find the bes st machine for your job.

Contact Marty Today! Today! Caall 608-419-0072 or Email mwaldorf@miller-bradford.com Wisconsin Sussex 800-242-3115

DeForest 800-585-7219

Eau Claire 800-585-7232

De Pere 800-638-7448

Marathon 888-886-4410

Michigan

Illinois

Negaunee 800-562-9770

Rockford 800-585-7231

www.millerr-bradfor -bradford.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2021 • Page 35

573-635-8700 • 888-972-2537 • www.rackersequipment.com

#141147-"NEW" RDO 5x12 2-deck screener with CAT C-4 water cooled engine. Remote control for feeder. Ball deck and grizzly hopper (no grizzly). 2-30" side discharge conveyors. #920000- 2002 Con-E-Co Mobile Central Mix Mounted on tandem axel 5th wheel chassis. Concrete Plant 300 TPH. Includes: 12yd agg batcher, (3) 60yd agg bins, mixer charging conveyor, 595 BLL split silo, cement/flyash batcher, PJ-500 dust control, (3) 30”x82’ portable conveyors.

#510113 (2007) Furukawa 900-ES Self-Contained Hydraulic Rock Drill with Cat 3126 engine (4892 hours) & HD-709 drifter (2203 hours). Set up for T-45 Steel (14′ starter & 12′ changes). Has anti-jam circuit and dust collector. One-owner machine and all service records available. Well maintained and in very good condition.

#154006 "New" Aggretek portable wash plant w/ 6x20 3-deck screen and twin 36"x25' sandscrews complete with electric motors, electric box and starters, wire cloth, and NiHard shoes, all on a 3-axle chassis.

#152028-(NEW) Aggretek 36 X 25 Single Fine Material Washer. with 15hp electric motor and includes Nihard shoes, adjustable legs, catwallks, stairs, guards, and operator platform. In-stock and ready for shipment.

Maximize your ROI

To get your best possible return on investment, highest productivity and longest equipment life, it’s important to use the right carrier with the right tool.

Before you buy or rent, rely on people you can trust. Allied Construction Products, with 78 years of experience, can guide you to the right hydraulic breakers – including our new Excellence and Performance Series models – and the right Ho-Pac® and Skid-Pac® compactor drivers. Because nobody delivers the right power, or the right features, like Allied.

#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.

Scott Scholz

Jeff Sharp

Rich Steinbrenner

#111070 Pioneer 2854 jaw crusher with 50x18’ VGF and electric motor all on a 3-axle chassis. Good condtion.

DRILLS & COMPRESSORS #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510116-Furukawa 15ED Hydraulic Rock Drill. Has twin Isuzu engines. 5667 hours on hydraulics, 4413 hours on compressor, and 5992 impact hours. Very good undercarriage. Enclosed cab w/ AC and heat. Dust collector, auto rod changer. Set up for T51 rod. Overall good condition. #510087-Furukawa 9E hydraulic drill with Isuzu diesel engine. 10764 engine hrs, 4619 impact hrs. Anti-jam circuit, dust collector, uses T-45 steel, 14 ft starter with 12 ft changes. Good condition. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.

#161007 New Willis 30"x60' radial stacker on 24" deep truss frame with 15HP electric motor and NBS #4 gearbox with backstop, Superior lagged head and wing-tip tail pulleys with Dodge bearings. 3-ply belt (US made rubber). Superior 4" CEMA C idlers, manual raise/lower and travel with pintle hitch and pivoted mounting plate.

JAWS & IMPACTS #111063-Terex Pegson 1180PT 32"x44" selfcontained jaw plant w/ operator-controlled track maneuvering. Large feeder w/ step grizzly section, grizzly pass-by chute, & discharge conveyor. Plant is currently in use & has approx 5082 (04/21/17)hrs. Very good condition. #111072-Pioneer 3042 jaw on shop built 2 axle chassis with Cedarapids 42"x16' grizzly feeder, 41/2' grizzly bars, jaw dies 95% good, 42" underconveyor, WEG motor, 16' hopper, 3/4" thick hopper sides and ends. Good condition. #112007-Kennedy Van Saun 3648 single rotor impact with electric motor & Deister 50”x18’ VGF on 3-axle chassis. #112046-Metso Nordberg LT1213S Loko Track mobile crushing & screening plant x47". 12 cubic yard hopper w/ vibrating grizzly feeder. Screening module is 2005. Conveyor width 47" & feed width 43".

#510115 Furukawa 1200ED hydraulic rock drill with 12,206 overall hrs & 3154 hours on Cummins 6.7 remanufactured engine. 5776 impact hrs but only 39 hours on drifter reseal. Includes cab with a/c & heat, dust collector and an anti-jam circuit. Good condition.

ALLIEDCP.COM | 800-321-1046

THERE’s NO SUBSTITUTE FOR EXPERIENCE #410070-CAT D6R dozer with 10' straight blade with good cutting edge. Has EROPS cab with air. Glass all good. 22" single grouser pads, overall condition of undercarriage is 60%. Pins have tit on drive side. Has 4600 hrs. SCREENS #141120-Nordberg 6x20 3-deck incline screen with ball tray on bottom deck. No motor, but was a running take out. Good condition.

SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 bar rotor. No power. Crusher is in good condition. EARTHMOVING #121053-Cedarapids 5040 Hammermill sec#810134-Euclid R-35 truck has an engine ondary crusher with 5x16 3-deck screen. that is a Detroit diesel V12 with an Allison Has rotovator, 36" return and 36" front dis6-speed automatic transmission. The tires are 1800x33 all in good condition about 50%. charge conveyors. All mounted on tandem Bed liner looks good as does the remainder of axle chassis. Plant is all electric except the FEEDERS hammermill is diesel jack shaft driven. No the truck. No leaks. Runs good. 134001-Peerless 12 cubic yard hopper with 42 belt feeder (2015), 5hp electric motor #810137 1977 Caterpillar 769B Rigid Frame power on mill. Power unit and control panel are available separately for $12,000. Engine Haul Truck with Cat D343 engine (10,314 with electric panel in very good to excellent hours). 18.00-33 tires approx 50%. Bed is in runs, but needs to be rebuilt. condition. #123025-Portable Telsmith 48" STD cone w/ good shape. Truck runs and operates good. #132015-Continental Gin 48"x25.5' apron 30" feed conveyor w/ 20 HP motor, Dodge #410063-CAT D9H w/ EROPS cab w/ A/C, feeder. Large feed box. Flights are approx TDT5 reducer, 36" undercrusher conveyor w/ straight blade w/tilt. Single shank, 4-barrel 80+%, good sprocket, & jackshaft drive gears. ripper. 24" pads. U/C (overall approx 70%). WEG 20HP electric motor. Cone has 125HP 60hp motor and gear box, but has removable Rebuilt engine, trans, and finals (HMR 2994) 1150RPM motor, mounted on factory tandem mount (for transport). Heavy duty apron feed- Left Trunnion is available but needs to be axle chassis. Good brakes, very good rubber. Good running cone. installed. Overall good condition. er. Shipping dims: 8' 7" tall & 30' long.

Jefferson City, MO 65110

ALTA EQUIPMENT COMPANY www.altaequipment.com

HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391

844-GO2-ALTA 18405 115th Avenue Orland Park, IL 60467 1035 Wylie Drive Bloomington, IL 61705 420 Nolen Drive South Elgin, IL 60177 2500 Westward Drive Spring Grove, IL 60081 613 E Stevenson Road Ottawa, IL 61350 26354 N US Hwy 12 Wauconda, IL 60084 480 Blaine Street Gary, IN 46406

Page 36 • March 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Tearing Down to Rebuild Omaha-Based Company Tackles Demolition Project in Its Home City Out with the old, in with the new. That is what demolition is all about. Last fall, Ronco Construction got to work removing the old in its hometown of Omaha, Neb. A construction project in the “Gateway to the West” required demolishing existing buildings to make way for a residential project that was bringing new housing options to the neighborhood. Ronco Construction was the perfect fit for the job.

Despite the obstacles, the demolition was successful and the next stage of building can begin. But the team has a little more time to work with now. The new residential job is slated to be finished in October 2021. “It’s a pretty new construction site,” Tomcak said. “At this point, we haven’t even started the actual building itself. We’re just doing prep and the dirt work; no walls at this point.”

Tools for Teardown Strong Foundation Being general contractors, comThis job is one that is close to panies like Tomcak’s often don’t home for Ronco Construction — have the luxury of selecting their literally. Founded in 1976, this genequipment for the job. They rely on eral contractor has been a fixture in their partners, such as subcontractor the Omaha community for decades. Doll Construction, to supThe firm works throughout the ply the machines. This job Midwest, which isn’t surprising was no exception. given its vast expertise. It has a ver- For this Omaha demolition project, Tomcak’s “We use mostly rental satile construction portfolio: com- team was equipped with a fleet of equipment equipment,” Tomcak said. mercial buildings, multi-family that included a Doosan DX235LCR-5 crawler “You get what they bring buildings, tenant improvements excavator paired with a bucket and thumb. you. You don’t have much and new construction. choice in the matter; you “We set a pretty kind of just work with high bar. We like to be what you’re given.” the standard,” said This means Tomcak has Mitch Tomcak, superlearned to be well-versed intendent of Ronco in all types of machines Construction. and how to make the most Tomcak has been out of the tools he has to with the company work with. since 2017 and helps For this Omaha demolicomplete jobs in the The Doosan DX235LCR-5 was a good fit for the job tion project, Tomcak’s Omaha area, which team was equipped with a requirements and the job site. continues to give fleet of equipment that Ronco contracted included a Doosan haul out.” work to keep it busy. This part of the process was quick for a DX235LCR-5 crawler excavator paired Ronco Construction reason. Not only is it quicker to tear some- with a bucket and thumb. The reduced-tailhas more than 80 thing down than to build up, but it also swing Doosan excavator was key in removemployees, including makes things safer if you get it down quickly ing the dirt and debris. The machine was a office and field staff The reduced-tail-swing Doosan excavator was key in remov- and correctly. good fit for the job requirements and the job that help to operate all ing the dirt and debris. “When you get a permit for this type of site. sizes of projects. “You don’t want something that’s going to demolition, you have 24 hours from when “We’ve got people that will just do the this undertaking. Tomcak worked with the it’s issued to topple the buildings, which is be smaller and take too long, but you don’t remodels or smaller buildings,” Tomcak jobsite foreman and the team to prepare the why we had to do it in two phases,” Tomcak need something that’s going to be overkill said. “And then there are people who do the site for rebuilding and constructed the new said. “They don’t want you to just take one just to have a giant piece on the site,” he said. larger projects. And we have employees that townhomes as well. Just because Tomcak doesn’t get to pick wall out and have half a freestanding build“Two of the lots were older houses, prob- ing there for somebody to get hurt. You gotta his equipment for a job doesn’t mean he and just do the in-between jobs. I’ve done everything from an eight-story building to a five- ably from around the ’40s or ’50s,” Tomcak bring the whole thing down within a certain his team don’t appreciate a good machine. story hotel. I’m doing a smaller, 10-plex said. “The other two lots were places from amount of time.” With the DX235LCR-5 excavator on this the ’60s or ’70s that this owner purchased. townhome at the moment.” Another factor of the teardown was the job, they found “it made it more of a comWe came in and demoed these houses to jobsite environment. The demolition project fortable operation.” make room for a 10-plex townhome.” Demolition in Action As they go forward with the site preparatook place within the city, at 46th and Saddle The demolition was a quick process, done Creek Road, making space a limiting factor. tion and build, the machines may change but For Ronco Construction, this Omaha demolition work was exactly what it was in two days. “It definitely limited who we could have Tomcak and his team are ready. Demolition “We did it in two phases,” Tomcak said. doing the job,” Tomcak said. “Since there’s is all about change, and demolition is what made for. The job called for the demolishing of the existing buildings on four lots to make “Two houses, then the two duplexes. Both only so much room and then it’s on a pretty they do best. houses in each phase were toppled in a day. big hill. So, as we came down, we had to do way for some new residences. For more information, visit The demolition was only the first part of Then, it was about two days to clean up and dirt removal at the same time.” na.DoosanEquipment.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2021 • Page 37

2020 Komptech Crambo 6000, Low Speed Shredder SR#469139, NEW CALL FOR PRICE

2020 Lippmann LTS-100 Tracked Radial Stacker, SR#90187, 755 Hrs $104,900

2020 BOSSTEK DUST BOSS DB-60 FUSION 60 METER DUST SUPRESSION, SR#2686, 8 Hrs $109,000

2011 MORBARK 3800XL WHEELED HORIZONTAL GRINDER, SR#191-1011, 2331 Hrs $359,000

2016 MORBARK 3800XL TRACKED HORIZONTAL GRINDER, SR#191-1057, 1857 Hrs $465,000

2018 MCCLOSKEY ST80 WHEELED 36”X80’ STACKING CONVEYOR, SR#89571, 95 Hrs $76,500

2019 MCCLOSKEY 516RE WHEELED 5X16 TROMMEL SCREEN, SR#89946, 764 Hrs $179,000

2021 McCloskey ST80T 36"x80' Tracked Stacking Conveyor, SR#91699, NEW CALL FOR PRICE

2021 McCloskey R155 Tracked 5x16 Heavy Duty Scalper Screener, SR#91582, NEW CALL FOR PRICE

2021 McCloskey 621RE Wheeled 6x21 Rotary Trommel Screen, SR#91625, NEW CALL FOR PRICE

2017 MCCLOSKEY I44V2 TRACKED 42”X43” IMPACT CRUSHER, SR#86917, 1526 Hrs $349,000

2020 MCCLOSKEY C2 TRACKED CONE CRUSHER, SR#90600, 657 Hrs CALL FOR PRICE

2021 Eagle Crusher 6x20 Horizontal Triple Deck Screen, SR#31817, NEW CALL FOR PRICE

2021 MCCLOSKEY S190-3DT RINSER, 5X20 – TRACKED 3 DECK RINSER TBD, SR#91616, NEW CALL

2021 MCCLOSKEY S190-2DT 5X20 - TRACKED 2 DECK SCREEN, SR#91333, NEW CALL FOR PRICE

2021 MDS M518R Tracked Recycling Trommel, 5m x 1.8m Drum, SR#TBD CALL FOR PRICE

Page 38 • March 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Alta Equipment Offers Break Thru Demolition Solution Werk-Brau Severe-Duty Bucket Werk-Brau's severe duty buckets are specifically designed for applications such as demolition work, shot rock, high abrasive applications, moderate prying and more. T-1 steel is utilized in all critical or high-wear components, according to the manufacturer. This bucket features tapered side plates, horizontal wear straps and an extra thick cutting edge is backed by a wear plate that covers the entire bucket bottom. Side wear plates protect the bucket sides in the high wear areas and extend the buckets operation life. Each bucket is engineered with tapered side plates to reduce wear on the bucket sides and to allow for easier dumping. The cutter bit is made from heavy-duty cast material. Break Thru Enterprises turned to Alta Equipment Company to help find the right machine for a challenging demolition job. DEMOLITION from page 29

choose which work mode — idle, fine, general, heavy and power max — is best for the current tasks at hand. The Volvo EC480EL’s D13 Tier IV Final engine, automatic idling system and auto engine shut down (after a pre-set amount of time) are just some of the features that enhance fuel efficiency. Volvo’s ECO mode optimizes the hydraulic system by reducing flow and pressure loss, improving efficiency. This option is automatic, but can be switched off when necessary. Durability in Tough Conditions Demolition requires a machine that can withstand harsh conditions. The Volvo EC480EL has a three-piece undercarriage with a high-strength tensile steel X-shaped frame. The undercarriage components are reinforced to help prevent dam-

Werk-Brau Stiff-Arm Grapple Werk-Brau’s grapples are designed to handle brush, rocks and demolition debris, according to the manufacturer. The company uses T-1 steel in all critical, high-wear components and uses highstrength steel throughout. Pivot points are made from hardened, greaseable bushings and can be easily accessed for regular maintenance.

age from rocks and debris. The track links and bottom rollers are also built to withstand tough job sites, including quarries, demolition sites and mass excavation sites. Volvo’s EC480EL Put to Work Break Thru took delivery of its new Volvo excavator with Werk-Brau attachments and put them to work. The west addition was wrecked as operator Juan Delgadillo was careful not to damage the adjacent steel structure. A portion of the slab and foundation also was removed. Delgadillo used the Volvo EC480EL to strip the exterior perimeter walls and the outer bays of the roof that could be reached outside the footprint of the building. This had to be done carefully to not damage the steel columns. Another challenge was a one-stop freight elevator that needed to be removed. Once again, the Volvo excavator was put to work to hoist the car out of the shaft. In the final building, the roof and slab needed to remain. For this portion of the project, the Volvo EC480EL was used to carefully remove the exterior walls. “The Volvo cab is comfortable,” said Juan Delgadillo, operator. “All the controls and accessory features are easy to use and access. The machine itself performs well.” “Buying new equipment is always exciting,” said Lisy. “The Alta team took the time to understand the application we were going use the equipment for. They presented the appropriate equipment/attachments options and explained the necessary maintenance. They made it an easy decision to purchase the Volvo 480.”  CEG

A Volvo EC480EL excavator outfitted with a Werk-Brau stiff-arm grapple helped Break Thru Enterprises meet the challenges of a demolition project.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2021 • Page 39

PRO OVEN UPTIME WITH UPTIME KIT KITS SENNEBOGEN, in keeping with their philosophy to maaximize uptime, uptime has created UPTIME Kits. W Whether you are a service technician in-house or on the road, these kits have everything you y need for every service, maintenance and PM task in one place. They were created to save you time and money. Managing hundreeds of related service parts, from belts and nuts to O-Rings and special tools becomes eassy with a single part number to order and stockk.

PURP POSE-BUIILT

FROM THE T GROUND D UP

They are: • Easy to order an nd easy to stock Ţ 1BDLFE XJUI KPC C TQFDJŻD components an nd tools • Ideal for stockin ng service shops and trucks Choose from the following f kits: • Central lubricattion system kits • Preventive main ntenance service kits • O-Ring kits • Electrical servicce kits • Hydraulic servicce kits And the best thing is that these kits, in stock and ready to go, are custom-built to match your machine mo odel and series. Count on 4&//&#0(&/ UP NFFU ZPVS OFFET JO UIF ŻFME or in-house. For m more information on UPTIME Kits scan the QR code. Kits, code

See how SE ENNEBOGEN can purpose-build the right maachine for you

www.seennebogen-na.com | +1-704--347-4910

BRANDEIS MACHINERY & SUPPLY COMPANY

ALTA EQUIPMENT COMPANY

GIBSON MACHINERY LLC

www.brandeismachinery.com

www.altaequipment.com

www.gibson machinery.com

Louisville, KY 502-491-4000

Stanville, KY 606-478-9201

Evansville, IN 812-425-4491

Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

Gary, IN Orland Park, IL South Elgin, IL Ottawa, IL Spring Grove, IL Wauconda, IL Bloomington, IL 844-GO2-ALTA

Cleveland, OH 440-439-4000

ROLAND MACHINERY CO. www.rolandmachinery.com Carterville, IL 618-985-3399 East Peoria, IL 309-694-3764 Bridgeton, MO 314-291-1330 Columbia, MO 573-814-0083 Cape Girardeau, MO 573-334-5252 Palmyra, MO 573-769-2056

Franksville, WI 262-835-2710 DePere, WI 920-532-0165 DeForest, WI 608-842-4151 Eau Claire, WI 715-874-5400 Schofield, WI 715-355-9898 Slinger, WI 262-644-7500 Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO.

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com

www.vlpco.com Kansas City, MO 800-878-9290

Savage, MN 800-888-9515

East Moline, IL 800-633-9114

Joplin, MO 800-878-8223

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Brookline Station, MO 800-955-2729

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Wichita, KS 800-878-3346

Sioux City, IA 800-633-9104

Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

Page 40 • March 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

FAE PT LINE: GET USED TO BEST IN CLASS

(770) 407-2014 - info@faeusa.com

fae-group.com

Soosan America Takes Different Rock Drilling Approach Just because technology makes it possible to automate a system, doesn’t mean that the system will function better automated. The current trend in the drilling industry is to mimic the automotive makers in attempting to automate every function in a rock drill. While automation will suit a few applications, the majority of rock drilling projects require operators and blasters with experience and skill to complete the tasks at hand. Electronics offer users digital displays and measurements that are helpful to the operator, but not always necessary. These electronic components are especially susceptible to the oils, grease and extreme vibration associated with the drilling process, yet many drill manufactures continue to add more and more of the fragile systems to their equipment. Failure of these digital systems can lead to extended down time and lost production for systems that are many times not even required for the drill to function effectively. Soosan America of Louisville, Ky., takes a different approach to drilling. All functions are kept as simple as possible. The simplified systems in the Rock Commander drills are more reliable and easier to maintain with the bare minimum of electronics, according to the company. These simple systems reduce down time and increase the profit margin at the end of the day. Most problems can be addressed over the phone with input from the operator and troubleshooting experts in Louisville, Ky. Parts can be sent out the same day with next day delivery almost anywhere in the United States. “The moto at Soosan America is ‘Keep It Simple’. We believe when it comes to drilling rock ‘the smartest thing in the drill should be the operator,’” the company said. For more information, call 502/244-0004 or visit soosanamerica.com and rockdrills.net. 

Soosan America believes in keeping all functions as simple as possible.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2021 • Page 41

mhl 375 F -SERIES

COMPANY WRENCH www.companywrench.com 4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-649-8105 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850 1330 KY-151 Frankfort, KY 40601 502-699-2681

ERB EQUIPMENT COMPANY

STRONG. RELIABLE. E EFFICIENT. Discover Morre Fuchs World- Class Material Handlers

www.erbequipment.com 200 Erb Industrial Dr. Fenton, MO 63026 636-349-0200 Foristell, MO 636-463-2500 Cape Girardeau, MO 573-334-0563 Cuba, MO 573-885-0500 Owensboro, KY 270-684-2339 Paducah, KY 270-554-1131 Mount Vernon, IL 618-244-6800 Evansville, IN 812-473-0484

Page 42 • March 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Illinois

Indiana

Kentucky

Minnesota

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen Crushing & Screening

Theco, Inc.

7144 N. Harlem Ave. Chicago, IL 60631 www.midwestcrushandscreen.com

847.271.5027

255 N. Hetzler Court Angola, IN 46703 www.powerscreenindiana.com

260.665.5816 • 800.843.4277

11901 Westport Road Louisville, KY 40245 www.powerscreensales.com

800.227.0534

14833 164th Ave. S.E, Big Lake, MN 55309 www.thecoinc.com

763.263.0505

Michigan & Ohio

Missouri & Kansas

AGGCORP

Powerscreen Central

22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net

9001 Hickman Mills Drive Kansas City, MO 64132 www.powerscreensales.com

614.309.6854

502.326.9300

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2021 • Page 43

A WIRTGEN GROUP COMPANY A

THE EVOLUTION OF INNOVA VATION. T THE EVO-LINE FROM KLE EEMANN

EVO IT’S ALL ABOUT EVOLUTION. The demands placed on plant s in the contrac ting sec tor are high: maximum output matched with cos tef fec tive operation – and all for the mos t diverse applications. This is exac tly what dis tinguishes KLEEMANN E VO -Line plant s. Thanks to highly innovative solutions, such as an advanced material flow concept, continuous feed sys tem, out s tanding safet y concept s and many more, KLEEMANN’sE VO -Line mobile jaw crushers, impac t crushers and cone crushers deliver a solid plus in per formance, ef ficienc y and versatilit y. Progress calls for real innovation – the KLEEMANN E VO -Line. w w w.wir tgen- group.com//a america

WIR RT TGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T Telephone: elephone: 615-501-0600

www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

www.rolandmachinery.com

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Page 44 • March 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2021 • Page 45

THE RIGHT MOBILE EQUIPMENT FOR YOUR OPERATION.

Designed with Maintenance in Mind Your ability to efficiently process materials on site depends on reliable equipment. KPI-JCI and Astec Mobile Screens design and manufacture a wide selection of mobile crushers, screens and conveyors designed with simplicity for easy operation and maintenance to keep you up and running. For unmatched customer support, our dedicated experts and distribution network will help you find a solution that fits your needs. Learn more at kpijci.com/track-mount

Road Machinery & Supplies Co. www.rmsequipment.com 5633 West Highway 13 Savage, MN 55378 800-888-9515 Fax: 952-895-9564

314 Garfield Avenue Duluth, MN 55802 800-888-9535 Fax: 218-727-3340

1400 North Highway 75 Sioux City, IA 51105 800-633-9104 Fax: 712-252-5064

315 North Hoover Road Virginia, MN 55792 800-752-4304 Fax: 218-741-9465

2525 16th Avenue SW Cedar Rapids, IA 52404 800-616-6615 Fax: 319-363-2075

100 Sheridan Avenue Des Moines, IA 50313 800-555-1445 Fax: 515-282-4876

General Equipment & Supplies, Inc. www.genequip.com 3901 N. Lewis Avenue Sioux Falls, SD 57104 605-336-9000 Fax: 605-336-0073

Alta Equipment Company www.altaequipment.com 8840 Byron Commerce SW Byron Center, MI 49315 616-878-7450 Fax: 616-878-7650

5105 Loraine St. Detroit, MI 48208 313-394-1811 Fax: 313-394-1812

56195 Pontiac Trail New Hudson, MI 48165 248-356-5200 Fax: 248-356-2029

3283 S. Dort Hwy. Flint (Burton), MI 48529 810-744-4840 Fax: 810-744-1523

1061 Stepke Ct. Traverse, MI 49685 231-943-3700 Fax: 231-943-8110

3725 Old 27 S. Gaylord, MI 49735 989-731-9988

7500 E 15 Mile Road Sterling Heights, MI 48312 586-474-5063

Page 46 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

Midwest Alta Equipment altaequipment.com Orland Park, IL 708-349-8430 South Elgin, IL 630-883-3320 Wauconda, IL 847-469-0120 Buck & Knobby Equip Co. buckandknobby.com Ottawa Lake, MI 734-856-2811 CSTK cstkequipment.com Kansas City, KS 888-566-5743 Dakota Prairie Mandan, ND 701-805-8000 Diamond Equip diamondequipment.com Mt. Vernon, IL 618-242-2273 Evansville, IN 812-425-4428 Terre Haute, IN 812-299-4747 Bowling Green, KY 270-781-1061 Farm Depot farmdepot.biz Caro, MI 989-673-6172 Ionia, MI 616-522-5501 Schoolcraft, MI 269-679-3939 G W Van Keppel vankeppel.com St. Louis, MO 314-872-8440 Hardings Heavy Equip hardingsinc.com Lowell, IN 219.696.8911 Hayden Machinery LLC haydenmachineryllc.com Springfield, MO 417-855-7057

hceamericas.com

Highway Equip Co. highway-equipment.com Canton, OH 330-915-8391 J Gross Equip Inc. jgeinc.com Aberdeen, SD 605-229-4037 Klochko Equip Rental Co., Inc. klochko.com Fair Haven, MI 586-725-4860 Melvindale, MI 313-386-7220 Midland Engine midlandengine.com Midland, MI 989-631-4608 Reco Equip, Inc. recoequip.com Columbus, OH 614-276-0001 Monroe (Dayton Area), OH 513-539-5255 Perrysburg (Toledo Area), OH 419-874-6001 Richfield, OH 330-659-0800 Florence, KY 859-727-7970 Indianapolis, IN 317-781-8100

Rueter’s rueterco.com Council Bluffs, IA 712-366-5221 Grand Junction, IA 515-738-2571 Carroll, IA 712-792-9294 Elkhart, IA 515-367-3054 Osceola, IA 641-223-8171 Sioux City, IA 712-266-3832 Neligh, NE 402-917-5604 Team Boone teamboone.net Bardstown, KY 502-369-2475 Titan Machinery lacrosse.titanmachinery.com La Crosse, WI 608-788-1025 United Truck Sales utsmi.com Clinton Township, MI 586-630-0355 Yes Equip & Services yesequipment.com Milwaukee, WI 414-263-9001 Madison, WI 608-243-9253

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 47

READY TO OUT-WEIGH THE COMPETITION

Hyundai wheel loaders come standard with an auto-weighing system that weighs accurately to within plus or minus 1%. With better payload management, you can operate more efficiently and maximize profitability.

TOMORROWSEDGETODAY.COM

Page 48 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Arcosa Video Highlights Commitment to Environmental Social Governance As a provider of infrastructurerelated safety equipment and solutions, Arcosa Shoring Products strives to create long term value for its customers and stakeholders by promoting a culture that values Environmental, Social, and Governance (ESG) responsibility. To that end, Arcosa recently produced a video highlighting the company’s ESG commitment. “Clearly the trench shoring industry’s number one priority is safety,” said Joe Zylman, president of Arcosa Shoring Products and NAXSA board member. “However, underground construction personnel are not the only Arcosa recently produced a video highlighting the company's Environmental, beneficiaries of all that we do col- Social and Governance (ESG) commitment. lectively. “The environment benefits every Governance by Arcosa Shoring and dealer network under the GME, Pro-Tec Equipment and Efficiency time a contractor digs a trench to install Products, is located on YouTube. Arcosa Shoring Products is one of Production brands. shoring rather than sloping. Arcosa Shoring Products is part of “Yes, trench shoring saves lives, but the largest trench protection equipment manufacturers in the country. The Arcosa Incorporated’s Construction it also does so much more.” The video, Environmental Social company operates its sales, marketing Products Division. 

Case Launches Equipment Finance Webcast The first official event as CASE LIVE was a new webcast on Feb. 24 held with CNH Industrial Capital titled “Finance Solutions to Help Grow Your Business” — focusing on ways for equipment buyers to wisely invest in equipment and solutions for long-term growth. Topics covered included advice on loan versus lease; the benefits of bundling additional warranty coverage; how to set up a payment schedule that mirrors business needs; and tips on how to quote more effectively based on expenses. The next scheduled webcast — Fluids & Filters to Optimize Machine Performance — will be held March 24 at 9 a.m. EDT. “Communication with contractors and owner/operators — and the availability of platforms that encourage discussion on best practices — is more important than ever,” said Athena Campos, head of market development, Case. “Our CASE LIVE platform will evolve to co-exist with in-person events in the future so that we can extend our ability to share ideas and information.” Visit CaseCE.com/LIVE for a schedule of upcoming webcasts and events, and to register for the upcoming webcast on finance solutions for equipment buyers. The webcast will include an initial discussion The first official event as CASE LIVE will be a new webcast of acquisition and financing strategies, followed by a held with CNH Industrial Capital titled “Finance Solutions to live Q&A with the audience and presenters. Help Grow Your Business” — focusing on ways for equipFor more information on Case, and the entire lineup ment buyers to wisely invest in equipment and solutions for of Case equipment, visit CaseCE.com.  long-term growth. Case Construction Equipment is launching CASE LIVE — a new broadcast and engagement platform with live events and educational sessions delivering topics that include equipment fleet management, acquisition strategies, new technologies, operational tips and new product launches. A list of planned events, and an archive of events and broadcasts held to date, can be found at CaseCE.com/LIVE.

ILLINOIS KENTUCKY DIAMOND EQUIPMENT DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon 618-242-2273

INDIANA MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428

www.diamondequipment.com Bowling Green 270-781-1061

OHIO CAT www.OhioCAT.com Richwood 888-446-4658

WILSON EQUIPMENT COMPANY www.wilsonequipment.com Lexington (Corporate Headquarters) 859-254-6443 Corbin 606-528-0700 Prestonsburg 606-874-8036

MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 49

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

OHIO OHIO CAT www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)

WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

Page 50 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650

1st Choice Equipment LLC

ABC Equipment Rental & Sales

Southeastern Equipment Co., Inc.

www.1stchoiceequipment.com

www.abcequipment.com

www.southeasternequip.com

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868

38525 Chester Rd. Avon, OH 44011 440/934-7368

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802

Alta Equipment Co. www.altaequipment.com 18405 115th Avenue Orland Park, IL 60467 844/GO2-ALTA

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 51

WORK SMART FROM THE GROUND UP

Looking to maximize your day-to-day operations? New pressure-compensated loadsensing (PCLS) hydraulics on the new John Deere 310SL Backhoe Loader smoothly increase your cycle times with 16% greater rear backhoe trenching productivity* and 10% more craning capacity.** Along with John Deere Connected Support™, you can elevate your underground operation above expectations and Run Your World. JohnDeere.com/backhoes

*Based on rear backhoe trenching productivity study, compared to previous model. / **With Lift Mode enabled, compared to previous model.

mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700

www.westsidetractorsales.com Lisle, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677

Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160

Page 52 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CUSTOM MADE PRODUCTS Scrapers, Rollers & Graders

For Sale & Rent SIXTEEN LOCATIONS IN IOWA, NEBRASKA, & WISCONSIN

CALL ANYTIME 24/7 2006 Kobelco SK250LC 9350 hrs, New undercarriage, New 48" bucket & bucket pins/bushings $56,000

515-332-1875 Visit our website @ www.gncmp.com

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

Benton, Illinois WWW.BRTRACTOR.COM

Clayton Whitesides has joined Takeuchi-US as its central Midwest regional manager. Effective Feb. 22, 2021, Whitesides will manage all sales development and activity within that territory, which includes Missouri, Kansas, Oklahoma, Iowa, Nebraska, South Dakota, North Dakota, Montana and west Texas. “Clayton’s previous industry experience managing a multi-state dealer network has prepared him well for his new role with Takeuchi,” said Henry Lawson, director of sales of TakeuchiUS. “He’s worked with dealers in all aspects of their businesses, performed competitive analyses and established sales goals. We welcome Clayton to the Takeuchi family, and we look forward to his contributions in the central Midwest region.” As a regional manager of Takeuchi, Whitesides’ primary focus will be achieving market share objectives in the region through numerous dealer activities, such as development, recruit-

ing, goal setting, sales planning and performance evaluations. He also will be responsible for inventory control, program promotion and communication, forecasting and national and direct rental account support. Whitesides comes to Takeuchi from Doosan Infracore North America of Suwanee, Ga., where he began his equipment industry career as an inside sales coordinator. From there, he became a district sales manager responsible for a six-state dealer network comprised of eight independent dealerships with 14 locations. “Over the past six years, I’ve trained and supervised staff while planning and implementing sales strategies,” said Whitesides. “I’m excited to put my proven track record to work for Takeuchi and collaborate with dealers in my territory to effectively promote, sell and service Takeuchi’s top-quality equipment.” For more information, visit Clayton Whitesides takeuchi-us.com. 

www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

GENERAL EQUIPMENT & SUPPLIES, INC.

618-435-2330

Takeuchi Hires Clayton Whitesides as Central Midwest Regional Manager

ROAD BUILDERS MACHINERY & SUPPLY CO., INC.

DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000

www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 53

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 East Moline, IL 309-755-7203 800-633-9114

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

OUR CUSTO OMER DEMANDS S BETTER QU UALITY AND PERFFORMANCE. The WA A600-8 is a top op performer in quarries acrosss North America. The powerful Komatsu engine, enhancedd torque converter and Smart Loader Logic allow the WA6000-8 to achieve low fuel consumption and high travel speeds. eds. A newly designed easy fill 9.2 cubic yard bucket retains material aterial better and provides better visibility, which contributes to significant improvements in machine efficiency and productivity vity.

• Integrated load ad meter and auto dig function • Increased tip loads for greater stability • Up to 13% better tter fuel consumption • New easy fill bucket design

Page 54 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.arnoldsinc.com Arnold’s of Kimball 701 State Hwy 55 E • Kimball, MN 55353 320/398-3800 Arnold’s of Glencoe 655 Lindbergh Trail • Glencoe, MN 55336 320/864-5531 Arnold’s of St. Martin 374 Industrial Drive • St. Martin, MN 56376 320/548-3285 Arnold’s of Mankato 1715 Howard Drive • Mankato, MN 56003 507/387-5515 Arnold’s of St. Cloud 2995 Quail Rd. NE • St. Cloud, MN 56379 320/251-2585

BURRIS EQUIPMENT CO. www.burrisequipment.com 2216 N. Green Bay Rd. • Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. • Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. • Joliet, IL 60433 815/464-6650

SOUTHEASTERN EQUIPMENT CO., INC. www.southeasternequip.com ABC EQUIPMENT RENTAL & SALES www.abcequipment.com

3333 W Coliseum Blvd. • Fort Wayne, IN 46808 260/483-8868

29 Pearl Rd. • Brunswick, OH 44212 888/572-3888

4951 West 96th Street • Indianapolis, IN 46268 317/872-4877

38525 Chester Rd. • Avon, OH 44011 440/934-7368

1st CHOICE EQUIPMENT LLC www.1stchoiceequipment.com 1555 Atlantic Drive • West Chicago, IL 60185 630/510-6050 1305 Sentry Drive • Waukesha, WI 53186 262/521-5802

COLUMBUS EQUIPMENT COMPANY www.columbusequipment.com 2329 Performance Way • Columbus, OH 43207 614/443-6541 12500 Williams Road • Perrysburg, OH 43551 419/872-7101 7570 New Carlisle Pike • Dayton, OH 45424 937/879-3154

SECTION

Attachment & Parts Pages 55-59

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Known for Crawler Carriers, Prinoth Also Makes Attachments Prinoth is well-known for its crawler carriers but also manufactures a wide range of mulching equipment and carriers. As a cutting-edge company where the latest developments and innovations in agriculture and forest management are, Prinoth continuously invests in developing high quality products including the latest excavator attachment, the M450e-1090. High Stability, Durability at Low Weight The M450e-1090 suits a wide range of excavators from 8.8 to 16.5 tons, as well as carrier vehicles with booms up to maximum 90 hp and thus expands the capacity of the M450e-900 mulcher. The power requirement is reduced by two-stage counter cutting at the material inlet, which prevents the rotor from being blocked by large pieces of wood drawn in. Due to the gear motors used in this model, no leakage oil line is required, so the machine can be attached to any excavator boom without additional conversion measures: “Plug & Mulch”. Mulching Heads for All Standard Excavator Models Prinoth offers the complete range between 6 to 30 tons. Its M450e-900 for 6 to 12 tons, the M450e-1100 for 12 to 18 tons and the M550e-1300 for 18 to 30 tons excavators. For universal use with carrier vehicles from 12 to 18 tons, the M450e-1100 offers a hydraulic variable displacement motor and the one-sided rotor drive characterizes a nearly maintenance-free power belt drive. The robust design of the machine and the innovative concept of counter-blades reduce power requirement and guarantee the best performance, according to the manufacturer. With a special customized mounting bracket, it is instantly ready for simple implementation on a Sennebogen 718e, for example. The M550-1300 is the biggest mulching head in this range and covers excavators from 18 to 30 tons. They all stand for top shredding quality, maximum safety and simple handling. With the flexibility of choosing different rotor types and tools, operators can achieve a perfect cutting performance and reduce the power demand at the same time.

Common excavator brands for the M550e-1300 for example are Doosan and Komatsu. Prinoth Vegetation Management Prinoth Vegetation Management is in Herdwangen, Germany, and constitutes the third and latest addition of Prinoth, which also manufactures snow groomers and tracked vehicles. With its robust tracked carrier vehicles ranging from 275 to 640 hp and its high-performance mulching solutions, Prinoth Vegetation Management provides sustainable solutions for clearing and re-cultivating forest areas, clearing streets for power lines, and transforming unused scrubland into areas that can be used for agriculture or forest management. Machinery and mulchers are developed and produced at The M450e-1090 suits a wide range of excavators the Herdwangen site, which employs approximately 130 from 8.8 to 16.5 tons, as well as carrier vehicles with staff. Prinoth is part of the HTI Group (High Technology booms up to maximum 90 hp and thus expands the Industries) with more than 3,800 employees across the globe. capacity of the M450e-900 mulcher. For more information, visit Prinoth.com/en/. 

LaBounty Launches Full Line of MSD Legend Series Shears Stanley Infrastructure announced that LaBounty’s full lineup of MSD Legend Series Shears is now available. These additions round out LaBounty’s mobile scrap shear portfolio and can be equipped with InSite, which provides real-time data to optimize shear performance and productivity. Maximizing productivity and uptime, the MSD Legend Series shears are equipped with full-protection, indexable piercing tip, Dual Max Indexable Protection, defending the shear from wear and preventing maintenance and downtime. Enhanced jaw geometry offers up to 10 percent more cutting force than LaBounty’s previous shear offering, according to the manufacturer. InSite is an advanced telematics platform that provides actionable information about the shears’ condition and activity, such as job tracking, jobsite mapping and remote diagnos-

tics. With the InSite app, available for iOS and Android, users have access to valuable information that helps customers optimize shear performance. Additional product details include: • Full 360-degree rotation with improved balance, which reduces attachment drift and increases operation stability • An enhanced and more durable lower jaw • Long-lasting index blades with intuitive patterns for 4-way indexable cutting • Wear bar protectors for maintaining heavy wear surfaces LaBounty also is now offering high-nickel replacement blades containing 4 percent nickel content for maximum blade edge life. Highnickel blade kits are available for most models of MSD Legend and Saber Series Shears. For more information, visit https://www.stanleyinfrastructure.com/products/msd-mobile-shears. 

The MSD Legend Series shears are equipped with full-protection, indexable piercing tip, Dual Max Indexable Protection, defending the shear from wear and preventing maintenance and downtime.

Page 56 • March 6, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

American Augers, Trencor Products Now Sold Through Ditch Witch Division Customers of Ditch Witch and Subsite Electronics products have been receiving service and support from their local Ditch Witch dealership for decades, and now with the addition of two new product lines, underground construction professionals around the globe can reap the same benefits. The Ditch Witch division will offer the full product lines, parts and service for both the American Augers and Trencor brands. Dealership and factory personnel have been working together to prepare for distribution of these two strong brands through the worldwide Ditch Witch dealer channel. The manufacturing of Ditch Witch products will remain in Perry, Okla., and American Augers and Trencor products will continue to be built in West Salem, Ohio. “This is a great opportunity for our Trencor and American Augers’ customers to receive all the benefits our Ditch Witch customers have been accustomed to for more than 60 years,” said Kevin Smith, general manager of the Ditch Witch Division. “We are excited about the integration of these two brands into our organization. Our dealerships, along with the current product support expertise provided by the factory, are fully prepared to extend their outstanding services to even more customers all over the world.” American Augers began in 1970 and has been leader in large-diameter underground construction since the beginning. With horizontal direction drills ranging from 110,000 to 1.1 million lbs. of thrust and pullback; auger boring

machines, including a 600,000-lb. electric unit; mud pumps and cleaning systems; and, now the Ditch Witch Division, the brand is well-positioned to continue its success far into the future, according to the company. Trencor manufactures mechanically driven trenchers and rugged surface miners with upwards of 950 hp. Trencor has a long history of success in the industry as the brand got its start in 1945. “These brands have excellent reputations in our industry and our dealers are committed to providing quality sales, services, parts and support to all current and new customers,” said Smith. For more information, visit www.ditchwitch.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • March 6, 2021 • Page 57

Page 58 • March 6, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Improving Customer Experience...

PUT MORE ON THE GROUND WITH

Winter Equipment Launches New, More Functional Website

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

Company Wrench www.companywrench.com

Headquarters: 4805 Scooby Lane NW Carroll, OH 43112 740-654-5304 866-262-4181

4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-402-7297

1330 KY-151 Frankfort, KY 40601 502-699-2681 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

Winter Equipment, an established name in the DOT, municipal and contractor snow and ice management industry, recently launched a new website to improve its customers’ experience and provide better functionality. Winter Equipment’s new mobile-friendly website’s navigation has been improved to provide multiple options for users to gain more information on the products they are looking for. Users are able to request a quote or schedule a virtual or live demo via Zoom or FaceTime quickly and easily, prompting a customer representative to connect. Whether users are long-time customers that know exactly what cutting edge system they are interested in or users that are new to the industry, the site’s redesign addresses all levels of expertise. It provides a comprehensive source of information on snowplow cutting edges, from applications (DOT, highway, rural road, parking lots) to materials (carbide and rubber) and blade types.

The website’s product category pages encourage users to quickly compare products to see which blade is best suited for their application. Fitment charts have been added for popular commercial contractor products, such as the Vulcan v-plow system, Pegasus expandable plow system, Xtendor guards and the MoDUS pusher box cutting edges. “We wanted our website to better align with our customers’ needs and provide the industry’s most complete snowplow cutting edge information in one place,” said Kent Winter, founder and CEO of Winter Equipment. “Increasing the overall user experience was the number one priority.” Winter Equipment developed its new website after studying user metrics and obtaining feedback from customers. The site will be monitored for user interaction to make continual improvements, as necessary. For more information, visit www.winterequipment.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • March 6, 2021 • Page 59

BRIN NG SAFETY A , INN NOVA VAT TION & DUR D ABILITY TO T YOUR O JOB SITE S ESCO O loader buckets are prec cision engineered and feature ature the Ultralok® tooth system s that provides safer and easier tooth replacement. Combined with premium materials and skilled fabrication, rication, ESCO delivers one of the most durable,, high-performance performance buckets availlable. ®

Ultralok lok® Tooth o System Syste y

General Equipment & Supplies, Inc. www.genequip.com 4300 Main Avenue Fargo, ND 58103 800-437-2924

www.esco.weir .

816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399

East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080

ESCO® Mang ganese Crusher Wea e r Parts

Roland Machinery Co. www.rolandmachinery.com Escanaba, MI Columbia, MO 906/786-6920 573/814-0083 Bridgeton, MO Palmyra, MO 314/291-1330 573/769-2056 Cape Girardeau, MO DePere, WI 573/334-5252 920/532-0165

DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710

Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

Copyrig ght ©, WEIR and the WEIR Logo are trademarks demarks and/or registered trademarks off We eir Engineering Services Ltd.

Page 60 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Associations Object to One-Size-Fits-All COVID Protocols OSHA from page 1

Those measures include ensuring infected or potentially infected people are not in the workplace, are following physical distancing protocols and are using masks. They also provide guidance on use of personal protective equipment (PPE), improving ventilation, good hygiene and routine cleaning. “Employers and workers can help our nation fight and overcome this deadly pandemic by committing themselves to making their workplaces as safe as possible,” said M. Patricia Smith, senior counselor to the secretary of labor. “The recommendations in OSHA’s updated guidance will help us defeat the virus, strengthen our economy and bring an end to the staggering human and economic toll that the coronavirus has taken on our nation.” ARTBA and AGC object to generic COVID-19 workplace protocols that don’t make sense for the construction industry. The AGC analyzed the guidance for members and noted that it’s not a standard or regulation and creates no legal obligations. Industry Weighs In “The recommendations are advisory in nature, informational in content and are intended to assist employers in recognizing and abating hazards in the workplace,” stressed the AGC analysis. The association also noted that the guidance follows established protocols in place since the pandemic began. AGC is highly concerned about the number of citations OSHA has issued since the start of the coronavirus pandemic. Representatives of the organization plan to seek clarification from OSHA on a number of points in the guidance, including information on citations issued to date. In February, ARTBA warned that a broad, indiscriminate ETS could unintentionally harm workers. Measures that consider each industry and their respective efforts at COVID prevention provide better protection for workers, maintains the association. Bradley Sant, ARTBA senior vice president of safety and education, addressed concerns during a Feb. 12, 2021, OSHA listening ses-

Construction associations support construction firms’ freedom to choose the best approach for their individual businesses and workforces.

Generic COVID-19 workplace guidance doesn’t make sense for the construction industry, and in some instances is redundant, construction associations maintain.

“Since the start of the coronavirus pandemic through Dec. 31, 2020, OSHA issued citations arising from 300 inspections for COVID-19-related violations.” Associated General Contractors of America

sion. Certain universal requirements could actually threaten the health of transportation construction workers, noted Sant. He referred to mask mandates affecting those who labor in hot outdoor environments and are already socially distanced from one another. Sant also reminded OSHA that the transportation construction sector is already committed to best practices for COVID prevention. Those practices include working outdoors, keeping at least six feet apart and remaining alone in closed equipment cabs. The AGC released resources available to its members regarding vaccine policies, including opposing government vaccine mandates. The association instead supports “construction firms’ freedom to choose the best approach for their individual businesses and workforces.” Dave Bauer, ARTBA president, wrote to James Frederick, principal

deputy assistant secretary of labor for occupational safety and health, in early February. ARTBA also is opposed to a one-size-fits-all approach. The association is monitoring OSHA’s actions on COVID policy on behalf of its membership. Guidance’s Focus In analyzing the guidance, AGC referred to the Occupational Safety and Health (OSH) Act’s general duty clause. In the absence of a COVID-19 standard, OSHA has utilized the clause to enforce workplace hazards associated with COVID. “Since the start of the coronavirus pandemic through Dec. 31, 2020, OSHA issued citations arising from 300 inspections for COVID-19-related violations,” noted AGC in its analysis. These violations resulted in proposed penalties totaling $3,930,381, some of which were issued under the general duty clause.

“AGC is seeking further information on COVID-19-related citations issued to date,” the association notified members. Protocols in place since the beginning of the pandemic include not permitting any ill individuals on the job site; wearing face masks/coverings; practicing social distancing; and routine cleaning and disinfecting. The AGC noted that the guidance includes several new recommendations: • Involving employees and their union or other representatives in the development of a COVID19 safety plan. The AGC wants clarification on the involvement of such representatives and their role with regard to existing COVID-19 safety plans. • Providing information and training on the benefits and safety of vaccinations. The association noted that the U.S. Center for Disease Control and Prevention (CDC) has provided a document that may satisfy this recommendation. AGC is working on a toolbox

talk format version of that CDC document to make available for its members. • Making COVID-19 vaccine or vaccination series available at no cost to all eligible employees. The AGC stressed that “making available the vaccine does not constitute a mandate for employers to require that employees be vaccinated.” The association believes employers should offer the vaccine to an employee, whether or not the employee agrees to take it. “Employers simply have to offer the opportunity for vaccination. AGC is seeking clarification on what exactly employers should provide when it comes to the opportunity for vaccination.” That includes reasonable compensation time to get their vaccination. • Minimizing the negative impact of quarantine and isolation on workers. “When possible, allow workers to telework, or work in an area isolated from others,” stressed the AGC. “If those are not possible, allow workers to use paid sick see OSHA page 80

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 61

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

Page 62 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2841 Verona Rd • Verona, KY 41092 859-485-8500 • Fax: 859-485-8573 www.newmantractor.com

11745-R Lackland Road • St. Louis, MO 63146 314-427-4911 www.cpower.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 63

DELIVERIING PERF ORM MANCE AND VERSSATILITY T Reliability, value and indusstry-leading performance are yo ours with our comple ete portfolio of mobile m telescopiic cranes. Grove products are available in n:

> All-terrain m models with capacitie es from 50 t (55 USt) to t 450 t (550 USt) > Rough-terraain models with capacities from 30 t (30 USt) to 150 t (165 USt) > Truck-moun nted models with capacities from 36.3 t (4 40 USt) to 100 t (115 USt) > Telescoping crawler cra models with capacities from 30 t (30 USt) to 127 t (140 USt) > Industrial models m with capacities from 8.1 t (9 USt) to o 22 t (25 USt)

www.m manitowoc.com

Kirby-Smith Machinery Inc. www.kirby-smith.com 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 4617 Powell Street McAlester, OK 74501 918/310-1550

6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300

Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757

Page 64 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Roland Machinery Co.

Central Power Systems & Services

www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474

Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151

Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920

www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Great Bend, KS (816) 781-8070 (620) 792-1361 ALP Air, Light, Power Liberal, KS Liberty, MO (620) 624-7274 (816) 415-6700 Salina, KS Joplin, MO (785) 825-8291 (417) 726-5373 Wichita, KS Maryland Heights, MO (316) 789-7370 (314) 427-4911 Woodward, OK Springfield, MO (580) 256-6014 (417) 865-0505 Yukon, OK (405) 324-2330

MAKE POWER MOVES.

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 65

Construction Machinery Company Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900

www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 2235 Ragu Drive • Owensboro, KY 42303 Dealer 270/683-2000 • 877/683-2262 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661

Kelbe Brothers Equipment Co., Inc.

Kirby-Smith Machinery, Inc.

www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151

www.kirby-smith.com 8320 Ruby Avenue • Kansas City, KS 66111 913/850-6300

Im mprint Area

4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 3101 French Rd. • DePere, WI 54115 920/343-6496

Page 66 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu’s Newest D71-24 HST Dozer Features Slant Nose Design, iMC 2.0 KOBELCO-USA.COM

Mid Country Machinery

Southeastern Equipment Co., Inc.

3478 5th Ave S Fort Dodge, IA 50501 800-206-5936

Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303

4734 Sergeant Road Waterloo, IA 50701 319-234-8710

1356 3rd Street Brilliant, OH 43913 740-598-3400

106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

1500 Industrial Parkway Brunswick, OH 44212 330-225-6511 6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

Komatsu’s D71EX/PX-24 with a powerful hydrostatic transmission (HST) is effective at grading, pushing, side-cutting and work on soft ground, giving users the flexibility to move from production to finishing with a single machine. Pushing with 237 hp, Komatsu’s largest HST dozer — 49,824 to 50,927 lbs. (22,600 to 23,100 kg) — helps operators maintain ground speed while operating under heavy loads in H mode. Its distinctive slant nose design offers enhanced visibility to the cutting edges and excellent balance and maneuverability, according to the manufacturer. Offering precision on the job site, from golf course construction to highway projects, the D71-24 is an all-around crawler dozer. It is equally adept at precise, high-speed grading and rough dozing, and is designed to provide outstanding wearability and functionality with its high-capacity, wearresistant dozer blade. The dozer’s Parallel Link Undercarriage System (PLUS) features rotating bushings to help minimize maintenance downtime and cost of ownership. D71-24, Intelligent Machine Control, iMC 2.0 The industry’s newest slant-nosed HST dozer also is available with Komatsu’s latest intelligent Machine Control (iMC) 2.0 capabilities: • Lift layer control optimizes earthwork productivity with the press of a button. It maintains compaction quality by automatically controlling lifts to the desired height. Excess fill is eliminated as automatic blade control follows the finish

26580 St. Rt. 7 Marietta, OH 45750 740-374-7479

DeForest, WI 608-222-9191

8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Eau Claire, WI 715-832-3443

404 Breaden Rd. Monroe, OH 45050 513-539-9214

De Pere, WI 920-338-5800

The industry’s newest slant-nosed HST dozer also is available with Komatsu’s latest intelligent Machine Control (iMC) 2.0 capabilities.

3875 W Fourth St Mansfield, OH 44903 419-529-4848

Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Pushing with 237 hp, Komatsu’s largest HST dozer — 49,824 to 50,927 lbs. (22,600 to 23,100 kg) — helps operators maintain ground speed while operating under heavy loads in H mode.

surface once lifts have reached finished grade. • Tilt steering control automatically tilts the blade to maintain straight travel during rough dozing. Reduces operator steering input by up to 80 percent. • Operators can create a temporary design surface with the press of a button with quick surface creation. Combined with other iMC 2.0 functions, crews can begin stripping or spreading using automated input while waiting for the finish grade model. • With proactive dozing control, even less experienced operators can automatically cut/strip from existing terrain. The dozer measures the terrain it tracks over and uses that data to plan the next pass, improving productivity by up to 60 percent versus previous generation machines. For more information, visit https://www.komatsuamerica.com/smart-construction/intelligent-machine-control . 

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 67

Company Wrench

Blue Ridge Tractor

Illinois Truck & Equipment Co.

Carroll, OH 704-654-5304

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

1330 KY-151 Frankfort, KY 40601 502-699-2681 www.companywrench.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 68 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Waukesha Water’s $286M Pipeline Includes Pumping Stations PIPELINE from page 1

ty that straddles the basin divide, meaning the city was eligible to apply to use Great Lakes water if it met a number of strict conditions, including demonstrating that it has no reasonable water supply alternative. The ten Great Lakes states and provinces, after extensive review, unanimously concluded in 2016 that ‘none of the evaluated alternatives were found to be reliable sources for a long-term, dependable and sustainable public water supply and, therefore, the applicant is without a reasonable water supply alternative’ to Lake Michigan water.” Waukesha also is required to return the water, after use and treatment, to the Great Lakes basin. In addition to the city of Waukesha, pipeline construction will occur in the Milwaukee, New Berlin, Muskego, Franklin, West Allis, Greenfield and the Village of Waukesha. According to Duchniak, water will be sold to Waukesha by the Milwaukee Water Works. A 13-mi. 30-in. water supply pipeline will be constructed from a pumping station in Milwaukee to Waukesha. A 23-mi. 30-in. return flow pipeline will be constructed from the Clean Water Plant in Waukesha to an outfall point in Franklin that empties into the Root River, which is tributary to Lake Michigan. The project also calls for a booster pumping station in Milwaukee. It includes a booster pumping station, two 8.6-milliongal. ground storage reservoirs and a 1-million-gal. elevated storage tank in Waukesha, and a return flow pumping station along with enhanced phosphorus treatment at the clean water plant. The work has been split into a total of six different contract packages of varying values that will be bid out through early 2021. The first project to break ground was the phosphorous enhancements at the clean water plant. Work on the return flow pipeline began in November 2020, and work on the water supply pipeline started in December 2020. Waukesha hired an extensive team of engineers and consultants, headed by Greeley and Hansen, to engineer and design the water supply and return flow infrastructure,

as well as to work with federal, state and local officials on required permits. “City residents have understood that a safe and reliable water supply is critical to the community’s future and have been strongly supportive of the project,” said Duchniak. “The business community, including the Waukesha County Business Alliance, also has been a key ally over the years. The Waukesha Common Council unanimously approved the project, and lawmakers at the federal and state levels have been strongly supportive. Waukesha Mayor Shawn Reilly and Milwaukee Mayor Tom Barrett also negotiated an agreement for Waukesha to purchase water from the Milwaukee water

Waukesha Water Utility

Construction crews in Wisconsin are working on a $286 million project that’s designed to provide safe, sustainable and reliable water for years to come.

Waukesha Water Utility

A 13-mi. 30-in. water supply pipeline will be constructed from a pumping station in Milwaukee to Waukesha.

works, setting a historic precedent for regional cooperation.” The three contractors on the project are S.J. Louis Construction Inc.; Super Excavators; and C.D. Smith Construction Inc. Duchniak described the construction teams as a good fit for the undertaking. “All these firms have the experience and personnel necessary to perform the work. Without their knowledge and skills, this project would not be possible.” Waukesha Water Utility Technical Services Manager Chris Walter said working through the multiple municipalities’ requirements has proven to be the biggest challenge on the project.

“Each municipality has specific requirements for the backfill and restoration of work in their jurisdiction. This requires a lot of coordination with multiple offices of each area. “The work has begun at the clean water plant in Waukesha. This work includes a new pumping station for the return flow. Additionally, the pipeline work has begun at the same location. This work is expected to progress south on Sentry Drive toward Sunset Drive. Soil erosion protection measures are being installed and potholing of existing utilities has begun. Additional pumping stations, water storage tanks and pipeline work, along with trench-

less activities, have yet to begin, along with roadway restoration.” Heavy machinery on site includes a Komatsu excavator PC 650 LC 8; a Komatsu WA 470; Cat excavator 325 zero turn; American Auger 48/54-900 Quick/Split; Cat D5K LGP; and a Cat 950M loader for pipe installation. Main materials include 30/36-in. ductile iron and HDPE. As for the condition of the site, some areas are open fields and others are roadways in various conditions. “Since this project is being completed in two different counties, seven different municipalities and also, in part, in state right of ways, there are a lot of varying conditions over the course of the 23 miles for the return flow pipeline and 13 miles for the water supply pipeline,” said Walter. Prep work for construction crews includes clearing and grubbing some areas; roadway removals; potholing existing utilities; installing soil erosion protective measures; and dewatering activities. Building the return flow pipeline from the Waukesha wastewater treatment plan to the Root

River calls for 23 mi. of pipeline installed via open cut and trenchless technologies; reaeration structure; and a concrete outfall on the bank of the Root River in Franklin. Waukesha Water Utility Operations Technical Services Manager Kelly Zylstra added, “There is a new pumping station being built at the end of the treatment train at the existing clean water plant site. The pumping station will allow flow to be directed to the existing outfall and the new return flow pipeline. The phosphorus upgrades include tank and chemical feed modifications.” Said Duchniak, “This is a project that will provide a safe, reliable water supply for the city of Waukesha residents and businesses for many generations. It’s the project of a lifetime, and to be entrusted by the leaders of the city to be part of the team that guided them through this process is an honor. We worked with eight neighboring communities to finalize the design and partnered with state and federal entities to fund the project. Having the distinction of being a part of it is very humbling.”  CEG

Trucks & Trailers

SECTION

Pages 69-78

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

SmithCo Conquers New Markets With Customized Solutions

SmithCo’s SX3 three-axle side dump is a popular choice for construction jobs, while longer trailers work well for line-haul operations.

By Ruksana Hussain CEG CORRESPONDENT

SmithCo’s Construction Pup CP30 is designed for off-road construction and agriculture.

SmithCo’s SX5 five-axle side dump features enable owners to haul nearly as much payload as a lead trailer with a short pup, but with a shorter footprint.

For more than 25 years, side dump trailer specialist SmithCo has been designing and manufacturing industry-leading equipment for the construction, agriculture, waste and demolition and other sectors, providing custom solutions to clients no matter the project requirements or geographical location. Just the way founder Greg Smith first built a side dump trailer in 1994 in his Le Mars, Iowa, farm shop — creating a solution where he saw a need. Addressing the inefficiencies of the end dump trailers he was working with, Smith improvised upon the side dump trailers he purchased from a company in Oregon. And so was born SmithCo, producing three trailers in the first year of operation with only three employees at the original factory located just south of Le Mars. In 1998, construction began to build the current 70,000-sq.ft. facility, which now employs more than 100 staff. Today, the company can produce more than 700 trailers annually, with the capacity to build more than 1,200 if required. All facets of production are undertaken at its manufacturing facility, which also houses a parts department, for components from other vendors and proprietary parts, as well as a repair shop to work on all types of trailers. Same day shipment of in-stock components is offered, though fabricated custom parts can take a U.S. Rep. Randy Feenstra (L) tours SmithCo with President and CEO week or two. Plans are in the works for expansion Scott Lovell on Jan. 29, 2021, in Le Mars, Iowa.

to the west of the facility to accommodate a new paint booth and blast booth in response to the company’s consistent growth. Smith retired in March 2019, with ownership moving to Minn.based Christensen Farms, one of the largest, family-owned pork producers in the United States. Scott Lovell, who has worked at SmithCo in various capacities during a 20-year period, took over as president and CEO. “What separates SmithCo from the competition is we don’t just build trailers, we build solutions,” said Lovell. “We have taken a completely different approach where we will design different tub and frame styles to achieve what the customer is trying to accomplish. We pride ourselves on the fact that we are very customer centered, and that has driven us to where we are today and viewed as the industry leader.” Custom solutions require a custom research and development process behind the scenes. At SmithCo, that entails a discussion with its design engineer of 22 years, Jim Verros, whose sole focus is customer-driven concepts. “Our sales engineer is extremely well-versed in the details surrounding all the different state DOT laws, so we know what the customer can achieve, and we will design the concept to achieve maximum payloads for that state,” said Lovell. The very first products designed that became see SMITHCO page 76

Page 70 • March 6, 2021 • www.constructionequipmentguide.com • Trucks & Tractors Section • Construction Equipment Guide

Isuzu Announces New 2022 F-Series Will Feature Classes 6, 7 Diesel Engine Isuzu Commercial Truck of America Inc. announced that the Cummins B6.7 diesel engine will now be featured in the new 2022 Isuzu F-Series trucks for the U.S. and Canadian markets. This is the first product to come to market globally from the Isuzu Cummins Powertrain Partnership (ICPP) between Isuzu Motors Limited and Cummins Inc. that was formed in 2019. The Isuzu FTR and FVR “The addition of the Cummins B6.7 diesel engine is one of many exciting developments for the Isuzu F-Series truck. Moving forward we believe the Cummins B6.7 will create broader appeal and will open up new sales opportunities for our dealer network,” said Shaun Skinner, president of Isuzu Commercial Truck of America and Isuzu Commercial Truck of Canada. The 2022 F-Series will now be available in two models — the Class 6 FTR (25,950 – GVWR) and the Class 7 FVR (33,000 – GVWR). Additionally, the line-up will include a de-rated Class 6 FVR. A total of eight wheelbases will be available for the FTR and FVR models. The low cab forward’s larger cab-to-axle (CA) space provides the Isuzu FSeries more cargo capacity versus conventional cab competitors with a comparable wheelbase. This gives customers more versatility with their body application choices to accommodate heavier or more spacious cargo loads, according to the manufacturer. As with all Isuzu low cab forward trucks, the FTR and FVR will have enhanced maneuverability, visibility and comfort. Drivers will appreciate the 50-degree inner wheel cut that gives the Isuzu F-Series class-leading turning diameters between 43.7-ft. (152 in. WB) and 65-ft. (248 in. WB). Increased visibility is made possible by Isuzu’s low cab forward-designed cab and new LED headlamps. The new interior design has dual-tone trim and seating that enhances its visual appeal while adding to passenger comfort. Cummins B6.7 Powertrain “The advanced, more powerful Cummins B6.7 powertrain will create new opportunities for our U.S. and Canadian dealers at a very opportune time. With our recent addition of Class 5 gas-powered N-Series models and now the Cummins-powered Isuzu F-Series, our product lineup has never been as broad for the growing medium-duty market,” Skinner said. The Cummins B6.7 is mated to an automatic six-speed Allison RDS transmission (2500 Series). This robust powertrain is built to provide the power that drivers demand while delivering the fuel efficiency and reliability that owners enjoy. With 260-hp and 660-lb.-ft of torque, this is the highest horsepower and torque available from the Cummins B6.7. This power increase in the Isuzu F-Series will easily

A total of eight wheelbases will be available for the FTR and FVR models.

www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090

The 2022 F-Series will now be available in two models — the Class 6 FTR (25,950 – GVWR) and the Class 7 FVR (33,000 – GVWR). Additionally, the line-up will include a de-rated Class 6 FVR.

8300 M-72 East Williamsburg, MI 49690 231-267-5060 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121

www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790

move heavier payloads through today’s urban environments and over the road between distribution centers, according to the manufacturer. “The Cummins B6.7 has a legacy that goes back almost 40 years, so we’re excited to see it in the Isuzu F-Series,” said Rob Neitzke, executive director of Cummins OnHighway OEM Business. “It gives Class 6 and 7 truck buyers in the U.S. and Canadian markets new ways to experience the B6.7, with configurations that don’t exist today.” Isuzu Cummins Powertrain Partnership (ICPP) The combination of Isuzu’s medium-duty truck reputation and Cummins diesel engine expertise in the United States and Canada creates a competitive product, according to the manufacturer. The F-Series trucks will meet customer demand for urban-friendly low cab forward trucks while giving Isuzu dealers and Cummins the opportunity to expand their customer bases. “Collaborations like the ICPP provide ways to make more efficient use of physical resources to better serve our customers’ needs. It prepares us for future challenges and the Cummins engine with our chassis gives the companies a unique product,” said Skinner “As forecasts for the mediumduty market reflect growth as we look to the future — the benefits from the ICPP come at a very opportune time.” Builtmore in Charlotte, Mich., will start production later this year. For more information, call 866/441-9638 or visit www.isuzucv.com. 

1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700 455 West Ave. North West Salem, WI 54669 608-786-2644

Construction Equipment Guide • Trucks & Tractors Section • www.constructionequipmentguide.com • March 6, 2021 • Page 71

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV

(09 )0 -63+ 9(47: $ 56 :*9(705. $ 56 4(9905. :JHU 5V^ [V >H[JO =PKLV

-; 37 ^P[O (PY )P -VSK 9HTWZ

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551

3300 Ogden Ave. Lisle, IL 60532 630-355-7150

www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362

600 Walnut Ct Rockdale, IL 60436 815-730-9011

3021 South 460 East Lafayette, IN 47905 765-477-6933

3110 Prairie Rd. Rockford, IL 61102 815-961-3160

1095 N Curry Pike Bloomington, IN 47404 812-333-9677

25166 State Road 2 South Bend, IN 46619 574-232-1461

3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576

3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160

Page 72 • March 6, 2021 • www.constructionequipmentguide.com • Trucks & Tractors Section • Construction Equipment Guide

XL Specialized Trailers Introduces Its New Capital Financing Program Kenworth’s T270 and T370 conventionals and K270 and K370 cabovers propelled Kenworth to its medium duty market share record.

XL Specialized Capital is available for all new 2020 model year or newer XL trailers sold in the United States.

XL Specialized Trailers is offering new financing for its trailer buyers with the XL Specialized Capital program. This program provides customers with a turnkey solution to get them hauling an XL trailer quickly and affordably, according to the company. A simple finance option, XL Specialized Capital is available for all new 2020 model year or newer XL trailers sold in the United States. The

introductory rate is 3.99 percent for 24 to 60 months with flexible payment terms. XL Specialized Trailers sells through a complete distribution network. Trailer buyers can complete their XL Specialized Capital credit application with the help of their local participating dealership, effective immediately, or get pre-approved online. The XL Specialized Capital program provides credit approval within

hours and helpful customer service. Additionally, a new 5-3-1 warranty policy was recently introduced by XL Specialized Trailers. This policy features full five-year structural coverage; full three-year paint coverage; and full one-year coverage on parts and components. For more information, visit, www.xlspecializedtrailer.com/finance. 

XL Announces New Warranty Policy XL Specialized Trailers has introduced a new warranty policy: the 5-3-1 policy features full five-year structural coverage, full three-year paint coverage and full one-year coverage on parts and components. Full 5 Year Structural Coverage The new warranty policy is an enhancement to the previous policy. XL Specialized Trailers are built with 100k flanges and 80k webs. The five-year structural warranty covers the trailer’s The 5-3-1 policy features full five-year structural coverage, full threestructural beams as well as the pin con- year paint coverage and full one-year coverage on parts and componections between those beams and the nents. warranty policy. It is a testament to the positive changes we crossmembers and outer rails of the load-bearing deck. have made at our company. Over the last two years, XL’s empowered workforce has improved product quality and Full 3 Year Paint Coverage XL Specialized Trailers’ new paint warranty guarantees reduced warranty expense to the point we are extremely conno peeling or delamination and cracking or checking of the fident in offering this higher level of service and support paint for three years. XL’s trailers are painted with a corro- through our warranty program,” said Stuart Sleper, president sion-resistant epoxy primer and urethane topcoat. The paint and CEO of XL Specialized Trailers. “We are aiming to provide customers greater peace of process is rigorously tested to meet strict adhesion and cormind by backing our trailers with the best warranty in the rosion-resistant ASTM standards. industry. We are there for our customers through the entire order process including after the sale.” Full 1 Year Parts & Components Coverage XL’s new policy is effective on all units invoiced Jan. 1, Trailer components are critical to a good user-experience. The full parts and component warranty covers axles, suspen- 2021, and after and starts at the time of retail sale or six sion, landing gear and all manufactured components as well months after the trailer is completed. For more information, visit as air, electrical and hydraulic components for one year. “Our team is excited to introduce a new and improved www.xlspecializedtrailer.com. 

Kenworth Achieves 2020 Medium Duty Retail Sales Record “We are always striving to enhance our trucks and maximize customer uptime.” Laura Bloch Kenworth

Kenworth achieved retail sales market share records for the United States and Canada of 15.8 percent in Class 8 trucks and 11.7 percent in medium duty vehicles in 2020. “Our industry-leading, premium quality Kenworth T680 on-highway flagship, T880 vocational leader and iconic long-hood W990 models drove sales and record Class 8 market share in 2020. Kenworth had excellent performance in both the on-highway and vocational segments,” said Laura Bloch, Kenworth assistant general manager of sales and marketing. Kenworth’s T270 and T370 conventionals and K270 and K370 cabovers propelled Kenworth to its medium duty market share record. “These versatile and reliable models serve a wide range of applications, and our customers count on them to provide high productivity and reliability over years of service,” Bloch said. “Our Class 8 and medium duty market share records were driven by the outstanding customer support provided by the Kenworth dealer network, the best in the industry. Kenworth dealers operate 431 dealerships in the U.S. and Canada, and 138 of our locations have met our stringent and demanding standards required to achieve the prestigious Kenworth PremierCare Gold Certified status,” Bloch said. Bloch noted that Kenworth continues to invest in its Class 8 and medium duty products. “We are always striving to enhance our trucks and maximize customer uptime. Kenworth also is pushing forward in advanced technologies as we pursue the development of exceptional and productive electric, hydrogen fuel cell electric and hybrid vehicles, and driver assistance systems and connected truck services,” Bloch said. For more information, visit www.kenworth.com. 

Construction Equipment Guide • Trucks & Tractors Section • www.constructionequipmentguide.com • March 6, 2021 • Page 73

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

New Heavy Duty Side Dump Trailer by Bauer Built Mfg. Now Exclusivley Available at Mid Country Machinery

BAUER SIDE DUMP FEATURES: • Hitch-style option: either AG (shown) or Gooseneck • 360-degree rollover hitch • Two trunnion pivot cylinders • Option to dump left or right side • Equal-displacement hydraulic suspension • All six hydraulic drum brakes

• Self-steer rear axle • Triple-axle design • Hydraulic jack • 40 ton/36 cubic yard capacity • 50k lb. rated hub and spindle (x6) • 750/45R26.5 floater tires

Page 74 • March 6, 2021 • www.constructionequipmentguide.com • Trucks & Tractors Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Tractors Section • www.constructionequipmentguide.com • March 6, 2021 • Page 75

Pittsburgh, PA Lancaster, PA Hubbard, OH Cincinnati, OH

(412) 747-7777 (717) 569-4531 (330) 534-0082 (513) 874-4880

Daily RENTALS & Long-Term LEASING! (412) 747-7777

New & Used Trailer Sales • Rental / Leasing • Financing • Service • Parts

2021 60-TON XL Specialized, 26’ Deck Length, 18” Deck Height, 60-Ton in 10’, 36” Flip Neck, Hydraulic Nitro Spreader, Intermediate Flip Axle, Standard Flip Axle. Trailer can be run as 3, 4, or 5 axles together, RU FRQ¿ JXUDWLRQV

2011 Aspen Folding Neck 70-Ton.

HYDRAULIC TAILS 2013 Trail-Eze, 40-Ton, 46’x102”. $36,900

Unit # 3521

EXTENDABLES

Unit # 4355

• 150 — 2015 Reitnouer 48'x102" Maxmiser $24,950 Flatbeds (Coming Soon) • 40 — 2014 Reitnouer 48'x102" Maxmiser $21,500 Flatbeds (In Stock)

Qty 5 - NEW Eager Beaver Pavers, 35 GSL-PT Hydraulic Detachable Lowboys, 35-Ton, 24’ Deck, Air Ride. Qty 1 - 35 GSL-BR, 35-Ton, 24’ Deck, Beaver Tail.

2013 Sunbelt Pole Trailer, 48’/65’x102”, S/R. Unit# 4031

2015 Fontaine Magnitude 55HDSR, 26’ in Well. Unit# 4442 Qty 2 – New Fontaine LXT-40, 53’-74’x102”, 34’ Well - Closed, 60’ Well - Open, 40-Ton, Mechanical Detach. (Pictured)

ALL Tri-State Locations

Qty 1 – New Fontaine LXTN-40, 50’-71’x102”, 29’ Well - Closed, 50’ Well - Open, 40-Ton, Hydraulic Detach.

Spec’s/ Features:

Qty 1 – New Fontaine 55MXT, 55’-76’x102”, 29’ Well – Closed, 50’ Well - Open, 55-Ton, Hydraulic Detach.

• Front Axle Lift

• 48’x102”

ONLY

9,300lb +/-

• Aluminum Wheels • LP22.5 Tires

55-Ton 15” Deck Height

• Winch Track on Both Sides of the Trailer

Qty 8 – NEW XL Specialized 55-Ton Hydraulic Detachable Lowboys, 15” Deck Height, 26’ Deck, Rear Lift Axle Available w/Both Standard and Hydraulic Flip Axles. Red, Black and Galvanized in Stock.

• +HQGULFNVRQ 7LUH ,QÀ DWLRQ 6\VWHP

*BEAVER TAIL DROPS*

EAGER BEAVER TAGS Qty 12 – 20XPT, 20-Ton, 21’ Flat Deck, Air Brakes with Spring Ramps (Qty 2 – with Hydraulic Ramps). Qty 4 – 25XPL, 25-Ton with Spring Ramps (Qty 2 – with Hydraulic Ramps).

NEW MANAC S-T-R-E-T-C-H FLATBEDS

*XL SPECIALIZED MINI-DECKS* 4W\ – 53’x102” 40-Ton Minideck, Hydraulic Classic Neck, 33’7” Clear Deck, 12” Loaded Deck Height, Accepts Both Flip Box and Flip Axle, Both Narrow Neck (Pictured) and Full Width Necks Available. 2019 Manac Extendable 48’-80’x102”. Unit # 4411

4W\ – 53’x102” 25-Ton LOW CAMBER Minidecks, Hydraulic Classic Neck with Full Width Top Deck, 33’7” Clear Deck, 12” Loaded Deck Height, Pony Motor, Accepts Flip Axle.

ip s Fl oxe e v B Ha Flip e W s& le Ax

Qty 11 - 53’x102” Dorsey Steel Drops with 53” Beaver Tail, Spring Assist Ramps, Winch Track, Both 22.5 and 17.5.

Qty 7 - 48’-80’x102”, Air Slider & Spring Slider. Qty 1 - 53’-90’x102”, Tri-Axle Air. All with Winch Track and Galvanized Winches.

Qty 6 – Fontaine Workhorse 55LCC, 18” Deck Height, 26’ Well, o/s Alum Wheels, Rear Lift Axle, Some w/ Wheel Covers. Qty 2 – Fontaine Magnitude 55-Ton Drop Side Rail, Rear Lift Axle, o/s Alum Wheels. Qty 1 – Fontaine Magnitude 60LCC, 18” Deck Height, 26’ Well, o/s Alum Wheels, Front Ramps, Rear Lift Axle.

Qty 1 – Fontaine EQI Hydraulic Spreader. Qty 1 – Fontaine Magnitude 60-Ton Beam Trailer, 28’ Beam, Modular Connection at Rear.

2018 Fontaine Magnitude 55L Plus, 26’ in the Well. Unit # 4234 2016 Fontaine Renegade LX40, 29’ in the Well. (Not Pictured) Unit # 4103

*D O R S E Y S T E E L F L AT S S* * Qty 20 - 48’x102” Spring Sliders, Winch Track w/12 Winches, Apitong Floor, Painted Black. $24,975 Incl. FET.

We Rent & Lease all types of Hydraulic Detachable’s, Drop-decks, Flatbeds, Sliding Axles, Extendable (flatbeds & double drops) Dry Freight Vans and more!

Page 76 • March 6, 2021 • www.constructionequipmentguide.com • Trucks & Tractors Section • Construction Equipment Guide

SmithCo Reports Receiving Record Levels of Orders

SmithCo offers a large series of A- and B-Trains with six- to 15-axle combinations. SMITHCO from page 69

The company employs a marketing approach focusing on Webthe core of SmithCo’s business are based content for those looking for aggregate trailers. Over the years and information about side dumps while across the different series and model targeting specific areas within the names, that basic design has continental United States where side changed as the company innovates. dumps are a viable option. Efforts Today, it is called the SX Series, include print and digital advertising encompassing many axle configuraand hosting demo days with dealers tions, lengths, materials and other on job sites. SmithCo also provides customizable factors. The original training to customers on site or intent for the side dump trailers was through its dealer network. the construction market, but agriculWhile the company was having a tural, waste, demolition and mining record production year when the have followed. coronavirus pandemic hit, the team The Feedlot Series, developed for feedlot operators to haul manure, has SmithCo President and CEO Scott Lovell sees more and proactively went into crisis managegarnered high demand in agriculture more first-time side dump owners, who appreciate the ment mode to ensure the supply chain remained intact. and mining. The Construction Pup trailer’s versatility. “We reduced inventory to generseries for site work also has gained ate cash because cash is key in those market share, presenting an economical global sales, but Central and South alternative to scrapers and haul trucks, from America’s mining sector have proved to be situations,” said Lovell. “Our goal was to an acquisitional and operational standpoint. viable options for SmithCo to compete with retain all of our employees and not lay anyone off. We achieved that goal. But after SmithCo has a huge presence in the west- local manufacturers. A market analysis the company did a few Thanksgiving, the faucet opened up and we ern United States and has sold trailers in years ago revealed side dumps only hold a got slammed with orders.” every state, including Hawaii and Alaska. The pandemic, however, isn’t the first Internationally, SmithCo’s product lines 15 percent share of the dump market. That’s time Lovell has witnessed SmithCo’s trials. a whole 85 percent that hasn’t experienced are in Canada, South America and the “With growth comes growing pains and Middle East. Shipping costs put a damper on SmithCo’s custom solutions, yet.

Each SmithCo trailer undergoes a rigorous manufacturing process. Here, grinding is performed to prep the steel for welding.

we are not immune to anything that any other company that grew fast has gone through,” he said. Making sure the infrastructure of the company keeps up with how fast the company grows is always a problem. “The introduction of an ERP system in 2015 integrating all processes has been a huge benefit to our efficiencies,” he said. An ongoing concern for every manufacturer is dealing with labor needs, and not just hiring, but also retaining the right talent. Another is staying on top of technology and automation so skilled labor and minds can be rechanneled where needed. But 2021 brings forth much optimism and SmithCo has been receiving orders at record levels. Anticipating challenges as the country reopens for business at the start of this year, Lovell said, “Not letting anything fall through the cracks is going to be vital as we go forward, to make sure we don’t run out of components due to supply or delivery issues. It’s our goal to maintain our position in the marketplace. We know where we stand and how we are viewed and we take that very seriously and every day strive to maintain it and improve upon what we do.”  CEG

SmithCo trailers feature high-quality welds to ensure the trailers are extremely durable.

Construction Equipment Guide • Trucks & Tractors Section • www.constructionequipmentguide.com • March 6, 2021 • Page 77

NO OT ALL T TRAILERS S ARE BU UILT THE E SAME SOM ME ARE STRO ONGER THAN N OTHERS

Our ttrrailers start out tough gh and stay tough so th heyy can safelyy haul yyour equipment q p day after t day, yearr after year. Learn more: towmaster ster.com/more .

Hyd Dump D Drop-De eck

Tilt-Deck

AMER RICA A’S ’S BEST B BUIL LT T TRAILE TRAILERS ERS FOR R PROFESSIONAL HAULER RS

Hyd draulic Tail a

Lowboy

M MORE MODELS • MORE OPTIONS PTIONS • MORE CHOICES

Call 800-462 2-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800 Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 Marne 1064 Franklin Street Marne, MI 49435 616-371-7250 www.McCannOnline.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 www.diamondequipment.com

Ziegler CAT 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Alta Equipment Company Bryon Center, MI 616-878-7450 New Hudson, MI 248-356-5200 Traverse City, MI 231-714-6210 Detroit, MI 313-394-1811 Flint (Burton), MI 810-744-4840 Gaylord, MI 989-731-9988 Sterling Heights, MI 568-474-5063 Bloomington, IL 309-585-3800 Spring Grove, IL 708-547-7300 Ottawa, IL 815-313-2070 www.altaequipment.com

Page 78 • March 6, 2021 • www.constructionequipmentguide.com • Trucks & Tractors Section • Construction Equipment Guide

'(6,*1(' 72 0$.( <285 -2% ($6,(5

Dodge Ram Tough Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

Gas-2500, Ready for Plow

2 Ram 5500 4x4 108 c/a. please call for spec

2020 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group

NEW PROMASTERS HERE & IN TRANSIT

COMMERCIAL HEADQUARTERS Jeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change Jarret Petsch 952-469-7063 jpetsch@jeffbelzer.com

7 5 $ , / ( 5 6

John Zadurski 952-469-6817 jzadurski@jeffbelzer.com

Minnkota Turns to Felling for Transportation Solution Minnkota Power Cooperative is an electric generation and transmission company headquartered in Grand Forks, N.D. It was formed in 1940 and now covers 34,500 sq. mil providing wholesale electric energy to 11 member-owned distribution cooperatives located in eastern North Dakota and northwestern Minnesota. The co-op needed to replace an antiquated mechanical detachable gooseneck semitrailer for its fleet, and Fleet Supervisor Keith Millette looked to Felling Trailers to fill this need. The detachable gooseneck would be primarily utilized for hauling transformers weighing 85 to 100k, but also would be a multipurpose unit, transporting payloaders and forklifts as needed. Millette worked with Felling Trailers’ sale representative Laurie Engle to configure the trailer build. The result was an XF-110-3 HDG-L (low) 55-ton hydraulic detach built to their spec, equipped with booster/stinger to compensate for the needed load transfer when hauling transformers. “The features most important to us were the hydraulic detachable gooseneck [vs. the mechanical], the low deck design [19.5 in. loaded, 6 in. ground clearance], and the ability to build the trailer to our specifications,”

Minnkota Power Cooperative’s XF-110-3 HDG on its first trip down the road carrying a Pennsylvania Transformer weighing 93,000 lbs.

said Millette. A hydraulic gooseneck is safer to use as the neck can be raised to allow the truck fifth wheel to attach without having to pick up the main deck in the process as you would with a mechanical gooseneck, according to the manufacturer. Other advantages of the hydraulic vs. mechanical gooseneck include a quicker detach/attach of the gooseneck in rough, uneven or wet terrain, and the hydraulic gooseneck can be raised or lowered to change the front deck height for ground clearance or overhead obstructions. The XF-110-3 HDG-L has a full-load

capacity in 12 ft. with a 13 ft. hydraulic detachable gooseneck, 108 in. swing clearance with a two-position kingpin at 96 in. and 108 in. Main deck length of 18 ft. (full 2 in. white oak on outer bays and center of the deck) with a 45-degree approx. full height trunnion approach with ¼ in. tread plate cover over the center of the trunnion and approach paired with a one-piece full-length wheel covers, and 20K load bearing. Additional features were incorporated for operator safety and ease of use, such as strobe light/flasher kit safety lighting and a self-contained 11-13 hp hydraulic system

with an electric start. Minnkota Power Cooperative’s fleet consists of 106 trailers, with approximately 60 of them Felling Trailers and 160 units. “We have been a Felling customer for 20 years. We choose Felling Trailers because they are well built and hold up to the rugged use needed for our company’s line of work. When we do our annual trailer inspections year after year, Felling requires the least amount of repairs compared to other trailer manufacturers we use,” said Millette. For more information, visit www.felling.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 79

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195

2015 DEERE 250G LC, 32" wide tracks, DA Aux. hydraulics, JRB coupler, 188 hp JD diesel, 11' 10" stick with 35' 10" reach and 24' 5" dig depth, camera, 56,100 lbs...........................................$127,000 5 JM Call Steve 262-373-2151

2018 TAKEUCHI TB216, OROPS canopy, main pin hydraulic thumb, digging bucket, rubber tracks, manual coupler, 7' 10" dig depth, 3' 3" min. machine width, Expandable track width from 38.6" to 51.2", 15 hp Yanmar diesel .....................$26,440 5 JM Call Steve 262-373-2151

2019 HITACHI ZW120-6, 2.0 cy Performance GP bucket, 101 hp Deutz, JRB 416 coupler, 17.5-2512PR L2 tires, ride control, limited slip differentials, Global e-Service telematics system, 18,590 lbs operating weight ..........................................$91,300 5 JM Call Steve 262-373-2151

2017 Komatsu PC240LC-11, 177 HP, 56,360# operating Weight, 19' 2" Boom, 11' 6" Arm, 31.5" Grouser, EROPS, Heat, AC, Rear View Camera, 1 or 2 Way Aux Hyd, Center Roller Guards, Hyd Quick Coupler, Auto Lube System, 28" Toy Bkt w/Teeth, 2 Buckets, Komatsu Care Certified, 12 Month 1,000 Hour Premier Warranty Good Through 12-31-20 ....................................$247,500 Call Dan Rude 605-336-0411 5-6 PK

2015 Leeboy 8500C, s/n 122257, 2750 Hrs, Paving Width 8’-15’, Heated Screed, Legend Screed System ............................................$54,900 5 JM Call Steve @ 630-878-8765

2018 Carlson CP130, s/n 109DB8P, 520 Hrs, Contractor deluxe package.......................$179,900 call STEVE @ 630-878-8765 5 JM

2014 Ditch Witch SK755, 1400 Hrs, wide tracks, 32.5 hp turbo engine, pressure relief hyd. couplers, 44” dirt bucket..............................................$22,400 Call Jeff @ 630-665-5600 4-5 JM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 5-6 EB

2015 Grove GHC 55 Tele Crawler, 55 Ton, 100’ Main Boom + jib Aux Hoist, Certified 2500 Hrs, original owner, Cleveland, Ohio.....................CALL Call Andy Forepaugh 216-316-1511 5-6 EB

2014 Manitowoc 8000 80 Ton Crawler, Request Boom Jib Combination Certified, Cleveland, Ohio ... .......................................................................CALL Call Andy Forepaugh 216-316-1511 5-6 EB

2017 New Holland C232, 2 Speed, Open ROPS, EH Controls, Block Heater, Turn Signals, 78” Low Profile Bucket with Bolt on Edge dwietbrock@ronsonequipment.com 5 JM

2007 Hyundai R320LC-7A, 0% for 36 Mos Available, Heat, AC, 13’3” Arm, 36” Grouser Pads, Pattern Changer, Add’l Cntrwht, Cummins QSC Dsl Eng, 54” Digging Bkt, 39’2” Digging Reach, 3185 Hrs ....$95,000 5 JM Call George 219-696-8911

1994 Blaw Knox PF150 8’ Paver with Deutz Diesel Engine, 8’ screed with hydraulic strike offs, 2004 Ingersoll Rand DD16, 3400 hours, 35” double drum roller ................................................$6,000 approximately 2,900 hrs use...............$15,00 as is 5 JM 800-283-1336 5 JM 800-283-1336

2010 Ingersoll Rand DD24, 2400 hours, 47” dou- 2017 DD120C, w/Intelligent Compaction and Pass ble drum roller ................................................$9,50 Counting, #7540 ...........................................$97,000 5 JM 5 JM 800-283-1336 800-283-1336

Here's how the BARGAIN ADS Work: • • • •

Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. Either email your copy & photo to: production@cegltd.com, or mail to:Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. Cost is $135 per ad, $60 additional for color. Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

Page 80 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OSHA Set to Decide New COVID Guidance in Mid-March OSHA from page 60

leave, if available, or consider implementing paid leave policies to reduce risk for everyone at the workplace.” The association noted that the Families First Coronavirus Response Act provides 100-percent reimbursement through tax credits to provide paid sick leave or expanded family and medical leave for reasons related to COVID-19. • Implementing protections from retaliation and setting up an anonymous process for workers to voice concerns about COVID-19-related hazards. Again, AGC noted that the OSHA Act prohibits discharging or discriminating against an employee for engaging in occupational safety and health activities. “Employers may not discriminate against employees for raising reasonable concerns about infection control to the employer, the employer’s agent, other employees, a government agency or to the public.” That includes communicating concerns through print, online, social or any other media. The employer may not take action against an employee for voluntarily providing and wearing their own personal protective equipment, either. • Not distinguishing between workers who are vaccinated and those who are not. Workers who are vaccinated must continue to follow protective measures, such as wearing a face covering and remaining physically distant, noted AGC. “Currently, there is no evidence that COVID-19 vaccines prevent transmission of the virus from person-to-person.” The CDC explained that experts need to understand more about the protection that COVID-19 vaccines provide before deciding to change recommendations, maintained AGC. • Providing guidance on screening and testing. The assoMARCH 2021 CRANE SAFETY COURSES March 8 – March 9, 2021 Qualified Signal Person Training, Cincinnati, OH March 10 – March 12, 2021 Qualified Rigger Level 2 Training, Cincinnati, OH March 10 – March 12, 2021 Aerial Work Platform Train The Trainer, Houston, TX March 15 – March 16, 2021 Critical Lift Planning & Lift Director Training, Cincinnati, OH March 15 – March 17, 2021 Rigging Inspector Training, Houston, TX March 15 – March 18, 2021 Overhead Hoist Maintenance Training, Orlando, FL March 17, 2021 Qualified Rigger Level 1 Training, Cincinnati, OH March 22 – March 26, 2021 Mobile Crane Train The Trainer, Orlando, FL March 24 – March 26, 2021 Forklift Operator Train The Trainer, Cincinnati, OH March 29 – March 31, 2021 Boom Truck Operator Train The Trainer, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com ASSOCIATION FOR THE WORK TRUCK INDUSTRY (NTEA) Work Truck Week 2021 (WTW21) Dates: March 8–12, 2021 Description: For more than 20 years, commercial truck manufacturers, distributors, upfitters and fleet managers have come together at The Work Truck Show® to see what’s new, hear what’s coming, and learn from each other the latest trends and ways to improve their operations and increase efficiency. Work Truck Week 2021 (WTW21) is a reimagined way to connect the commercial vehicle community and provide the product news, market trends and operational insights you’ve come to expect from North America’s largest work truck event. WTW21 will offer the industry access to: • Latest information on work trucks, equipment and other new products • Exclusive updates from leading chassis manufacturers • Analysis of relevant economic and market trends • New sustainable vehicles and technology • Opportunities to connect with industry-leading manufacturers and suppliers • Dedicated updates from chassis manufacturers producing battery electric work trucks

ciation urges members to follow state or local guidance and priorities for screening and viral testing in workplaces. “Testing in the workplace may be arranged through a company’s occupational health provider or in consultation with the local or state health department.” Employers should inform workers of employer testing requirements, if any, and availability of testing options. “The CDC has published strategies for consideration of incorporating viral testing for SARS-CoV-2, the virus that causes COVID-19, into workplace preparedness, response and control plans.” The new guidance also links to industry-specific recommendations, including construction, noted AGC. “Currently, the information remains unchanged and maintains that construction workers’ risk exposure to be generally in the low to medium range.” The current guidance states that in limited circumstances, including situations involving close contact with someone with suspected or confirmed COVID-19, respiratory protection may be needed. AGC wants clarification on this point. Lastly, the association stressed that the current information is subject to change. Protecting Employees The EO directs OSHA to consider whether any ETS on COVID-19 is necessary and if so to issue any by March 15, 2021. “ARTBA urges the agency to fashion any potential standard collaboratively to achieve the best safety result possible for workers and avoid potential consequences,” wrote CEO

Bauer. “A new ETS should consider the specific attributes and existing safety protocols of particular industries, with the objective of not undermining those protections to the detriment of their workers.” He pointed out that the typical work conditions in transportation construction already utilize several best practices for COVID prevention. ARTBA members work primarily outdoors, in contrast to many other industries and construction sectors, he noted. “Furthermore, transportation construction personnel are often isolated, operating equipment or performing tasks that facilitate social distancing.” Plus, job sites have incorporated many OSHA-recommended safe practices, wrote Bauer. “We are concerned that a sweeping COVID-related ETS will not fully reflect the uniqueness of transportation construction work and the resulting COVID safeguards which are already part of our work practices.” Transportation construction’s outdoor setting also makes it subject to varying weather conditions. “An indiscriminate ETS, directed primarily at indoor industries, could require personnel to wear PPE when working outdoors and socially distanced. “In hotter weather or climates, such a directive could lead to heat stress and other hot-weather hazards when such PPE is not needed.” Like the AGC, ARTBA believes a tailored ETS could protects workers from both COVID and the safety challenges they confront each day, wrote Bauer.  CEG

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Registration is OPEN! WORLD OF ASPHALT (WOA) & NATIONAL APHALT PAVEMENT Visit https://www.worktruckshow.com/2021 and sign up to ASSOCIATION (NAPA) People, Plants, and Paving Digital Conference receive WTW21 details as they become available. Dates: March 9-11, 2021 Email info@ntea.com for additional information. Description: The People, Plants, and Paving Digital Conference features a variety of educational sessions and a live questionASSOCIATED BUILDERS AND CONTRACTORS (ABC) and-answer portion with the instructors. Many sessions qualify 2021 ABC Convention for Professional Development Hours. Dates: March 9–11, 2021 * People Location: Gaylord Texan Resort & Convention Center Focuses on the important skills necessary to manage and 1501 Gaylord Trail coach personnel to their maximum performance. Grapevine, TX 76051 * Plants Description: ABC Convention 2021 is tailored to you, the ABC Experts will discuss how to evaluate and improve plant permember. This is your opportunity to gain valuable industry formance and to keep the plant operating at peak levels. insights, network and celebrate with fellow ABC members— * Paving Learn important techniques to construct safe and smooth merit shop contractors from across the country—and leave feelquality pavements at optimum efficiency and enhanced profing energized and empowered for the year ahead. We’re opening ABC Convention 2021 with a powerful message itability. from inspirational speaker Jon Dorenbos. Jon’s story of turning * Pavement Preservation Learn techniques used to extend the life of pavements such tragedy into triumph and overcoming life-or-death challenges as seal coats, in-place recycling, and crack sealing. with grace, persistence and a childlike sense of wonder is the * Environment, Health, Safety & Sustainability (EHS&S) perfect message for these challenging times. Join us in heading Obtain the tools, best practices, and innovations to build a into 2021 with optimism and enthusiasm. world-class EHS&S culture. These sessions are tailored to the ABC Convention 2021 has prepared a thoughtful program com- EHS&S professionals at asphalt plants and sites. plete with engaging and insightful events that we’ve curated to Registration is now open. Cost is $299. adapt to and anticipate the changing times. From four engaging Stay updated on the latest conference information, visit keynote speakers to top industry insights, the Excellence in https://www.worldofasphalt.com/visit/education/people-plantsConstruction® Awards Gala, and a golf tournament to benefit and-paving-digital-conference to learn more and register. the Trimmer Construction Education Fund at Cowboys Golf Club, we are planning an event that will inspire and energize the merit NORTH AMERICAN SOCIETY FOR TRENCHLESS TECHNOLOGY (NASTT) shop for the year ahead. No-Dig Show 2021 Registration for attendees who wish to attend ABC Convention Dates: March 28–31, 2021 2021 in person is CLOSED. Only VIRTUAL registration will be Location: Orange County Convention Center available until Monday, Mar. 1. 9800 International Dr. NOTE: There will be no on-site registration available. Orlando, FL 32819 Visit abcconvention.abc.org for regisration and for more infor- Description: NASTT’s No-Dig Show is the largest trenchless techmation about this event. nology conference in North America, where professionals attend

to learn new techniques that will save money and improve infrastructure. This show offers six tracks and 160 peer-reviewed, non-commercial presentations, including case studies detailing environmentally friendly trenchless solutions and cost-saving opportunities for municipalities and utilities. With over 190 exhibiting companies and multiple networking events, spend quality time with current colleagues/customers and grow your connections. Whether you’re a newcomer or a show veteran, NASTT’s No-Dig Show is the must-attend conference for underground infrastructure professionals. Registration is now open. **New this year! If you aren’t able to join us in-person we are offering two months of access to educational sessions in an ondemand format from April 1, 2021 through May 31, 2021. The link to access the on-demand sessions will be emailed on March 31, 2021. The on-demand option is for those NOT attending the 2021 No-Dig Show in person in Orlando. If you are planning to attend and would like to add on the on-demand option to your registration, you must register for a Full Conference Pass. Visit www.nodigshow.com for more information or to register for this event. For attendee or registration questions, email Vicki Losh at vlosh@benjaminmedia.com. AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC) NASCC: The VIRTUAL Steel Conference Dates: April 12–16, 2021 Description: The North American Steel Construction Conference(NASCC) is the premier educational and networking event for the structural steel industry, bringing together structural engineers, structural steel fabricators, erectors, detailers, and architects. Due to COVID-19, AISC has made the decision to make this an online event for the second year in a row. Whether online or in person, NASCC is your opportunity to learn from leading experts about the latest design concepts, construction techniques, and cutting-edge research in the steel community while earning PDHs. Included in this event are several other conferences such as the World Bridge Symposium, QualityCon, Architecture in Steel, SSRC Annual Stability Conference and NISD Conference on Steel Detailing. One low registration fee gains you access to all of the technical sessions, the keynote addresses, the T.R. Higgins Lecture, and the virtual exhibition hall. Registration is now open. $200 for Members / $400 for Non-members. Discounts are available. For information and to register, please visit aisc.org/nascc.

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 81

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. KINDLY SEND US YOUR OFFERS IF ANY AVAILABLE. THANKS. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. IF YOU HAVE ANY UNITS AVAILABLE PLEASE LET ME KNOW. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): CAT 966F & CAT 966F II. IF ANY ONE HAS ONE AVAILABLE PLEASE LET ME KNOW. THANK YOU. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03350237541 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE BULLDOZER 700JXLTT OR 700JLGP UNDER 900 HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA; PHONE: 1-450-346-8975 ––––––––––––––––––––––––––––––––

WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS; I AM LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODLES BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S3 OFF-HIGHWAY TRUCKS - LOOKING FOR REAR END DIFFERENTIAL FOR 30TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (US): NEED CAT 966F WHEEL LOADER ANY CONDITION IS PREFERABLE. OFFER US ANY CONDITION YOU HAVE AVAILABLE. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) –––––––––––––––––––––––––––––––– WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 ––––––––––––––––––––––––––––––––

WANTED (NORTHEAST): DROP DECK FLATBED TRAILER O/A LENGTH 30-36 FEET EMAIL: RIMROCK.TRUCKING@YAHOO.COM; PHONE: 917-478-3250 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPION SERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR 966F II WHEEL LOADER; LOOKING TO BUY CAT 966F 2 ANY CONDITION. EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR EXCAVATORS – WHEEL LOADERS, GRADERS, ALL MODELS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR EXCAVATORS, ALL MODELS. LOOKING TO BUY USED CONTRACTION WITH WHOLESALE. EMAIL: HUJIJIENTERPRISES@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (USA): KOMATSU EXCAVATORS, ALL MODELS. LOOKING TO PURCHASE ANY HEAVY EQUIPMENT OR TRUCKS! EMAIL: JDLANDWORXEQ@GMAIL.COM; PHONE: 910-585-1608 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAS AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS. ALSO WE BUY OLD CAT MACHINES. EMAIL: USA@GCESEQUIPMENT.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 988A WHEEL LOADER. I SEEK TO PURCHASE A CAT 988A THAT IS IN WORKING ORDER, WITH GOOD TIRES AND A BUCKET WITH TEETH. EMAIL JIMTHORNTON@STNY.RR.COM OR CALL 607-483-2383. –––––––––––––––––––––––––––––––– WANTED (PA): FORD F250 SUPER DUTY PICKUP TRUCK, WITH 6.4 DIESEL, ANY CONDITION. EMAIL: HARLOWCONTRACTING@YAHOO.COM OR CALL 267-738-5984. –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS OF CATERPILLAR CRAWLER LOADERS OR ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE. EMAIL AMERICAUSEDEQUIPMENT@ GMAIL.COM OR CALL 657-236-7504. –––––––––––––––––––––––––––––––– WANTED (PA); GARWOOD 75B CRANE, ANY CONDITION OR ANY ATTACHMENTS. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): KOEHRING 1066 EXCAVATOR, ANY CONDITION. CALL 267-738-5984 EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE 860 SCRAPER TRANSMISSION, ANY CONDITION. CALL 267-738-5984 EMAIL HARLOWCONTRACTING@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): AKERMAN MOTOR GRADERS, ALL MODELS. (WORKING OR NON). EMAIL: HIEEQUIPMENT@GMAIL.COM; PHONE: 775-235-8837 ––––––––––––––––––––––––––––––––

Page 82 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Ft. Worth, TX Thurs., March 11, 2021 For: Late Model Construction Equipment & more • Dallas, TX Fri., March 12, 2021 For: Late Model Construction Equipment & more • Las Vegas, Nevada Sat., March 13, 2021 For: Late Model Construction Equipment & more • Englewood, NJ Wed., March 17, 2021 For: Late Model Construction Equipment & more • Fulton, NY Thurs., March 18, 2021 For: Late Model Construction Equipment & more • Parkersburg, WV Fri., March 19, 2021 For: Late Model Construction Equipment & more • Houston, TX Wed., March 24, 2021 For: Late Model Construction Equipment & more • Bridgeport, NY March 24-27, 2021 For: Late Model Rental Returns, Construction Equipment & more • San Angelo, TX Thurs., March 25, 2021 For: Late Model Construction Equipment & more • Central Connecticut Sat., March 27, 2021 For: Construction Equipment Retirement Auction

• Chicago, IL March 30-31, 2021 • Sacramento, CA March 31, 2021 • Houston, TX April 13-14, 2021 • Tipton, CA May 19, 2021 • Williston, ND June 2, 2021 ABSOLUTE AUCTION & REALTY INC. www.AARauctions.com 800-243-0061 • ONLINE ONLY Ends March 2, 2021 For: North East, NY Fire District Surplus Auction • ONLINE ONLY Ends March 8, 2021 For: Stormville, NY Vehicle Auction

• Ft. Worth, TX March 9-10, 2021 • Los Angeles, CA March 19, 2021 • North East, MD March 23-24, 2021 • Chehalis, WA March 25, 2021 • North Franklin, CT March 25, 2021

• ONLINE ONLY Thurs., March 25, 2021 For: Construction Equipment Auction

HENDERSON AUCTIONS www.hendersonauctions.com 800-850-2252

• ONLINE ONLY Bidding Ends March 23, 2021 For: Timed Online Auction

• Livingston, LA March 25-27, 2021 For: 3-Day Spring Public Contractor’s Auction

• Riviera Beach, FL Bidding Ends March 31, 2021 For: Premier Timed Auction

• New Iberia, LA Thurs., April 1, 2021 For: Construction/Marine Liquidation Live Auction w/ Online Bidding

JM WOOD AUCTION CO. www.jmwood.com 800-447-7085

• Canton, MS Thurs., April 22, 2021 For: Public Contractor’s Auction

BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • ONLINE ONLY March 13, 2021 • ONLINE ONLY March 26, 2021

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

• ONLINE ONLY Wed., April 14, 2021 For: Heavy Equipment, Truck & Trailer Auction

• ONLINE ONLY March 9, 2021

• ONLINE ONLY March 30, 2021

All our auctions are now online bidding only!

JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800

• Marietta, PA Friday, April 16, 2021 For: Truck, Trailer & Equipment, Online Auction

• Knoxville, TN Wed., March 31, 2021 For: Major Job Completion Auction of Earthmoving Equipment & more

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631

To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

HESS AUCTIONEERS LLC www.hessauctioneers.com 866-511-2493

• ONLINE ONLY March 16, 2021

• Atlantic City, NJ Thurs.-Sat., April 8-10, 2021 For: Annual 3-Day Construction Equipment Auction

• ONLINE ONLY Wed., March 24, 2021 For: Vehicles & Equipment Auction

• ONLINE ONLY Ends March 8, 2021 For: Village of Mount Kisco, NY Surplus Auction

• Hauppauge, NY Tues., March 30, 2021 For: Very Large Late Model Snow & Construction Equipment

• Watertown, NY Thurs., April 1, 2021 For: Premier Farm & Construction Equipment & Truck Auction

Coming Auctions

For: Ohio Construction & Transportation Equipment Public Auction

• ONLINE ONLY March 23, 2021

DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540

• Philadelphia, MS March 24-25, 2021 For: 20th Annual Springtime Contractors Equipment & Truck Auction

IRON AUCTION GROUP www.ironauctiongroup.com 864-546-1216 • Concord, NC Thurs., March 11, 2021 For: Unreserved Retirement Auction – Concord Builders JJ KANEAUCTIONEERES www.jjkane.com 856-764-7163

• ONLINE ONLY Bidding Ends March 2, 2021 For: Timed Online Auction • ONLINE ONLY Bidding Ends March 2, 2021 For: Online Surplus and Forfeiture Auction

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• Plymouth Meeting, PA Bidding Ends March 3, 2021 For: Premier Timed Auction

• Pendleton, IN Fri., March 26, 2021 For: 29th Annual Spring Auction

• ONLINE ONLY Bidding Ends March 9, 2021 For: Timed Online Auction

• Munci, IN Thurs., April 1, 2021 For: Excess Equipment Auction

• Concord, NC Bidding Ends March 10, 2021 For: Premier Timed Auction

• Crown Point, IN Thurs., April 8, 2021 For: Absolute Equipment Auction

• Atlanta, GA March 26, 2021

EURO AUCTIONS USA www.euroauctions.com 770-683-3883

• Birmingham, MO March 26, 2021

• Leeds, UK March 10-13, 2021

• Las Vegas, NV March 26, 2021

• Dubai, UAE March 22, 2021

• Nashville, TN March 30, 2021

• Zaragoza, Spain March 24, 2021

• Concord, NC Bidding Ends March 11, 2021 For: Premier Timed Auction • Riverside, CA Bidding Ends March 11, 2021 For: Ken Porter Premier Auction • ONLINE ONLY Bidding Ends March 16, 2021 For: Timed Online Auction • ONLINE ONLY Bidding Ends March 17, 2021 For: Online Surplus and Forfeiture Auction

• Montgomery, AL March 16-20, 2021 For: Trucks, Construction, Ag & Forestry J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864 • Online Thurs., April 22, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More • Online Thurs., May 27, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More • Online Thurs., June 24, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • ONLINE ONLY April 1 – April 8, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE ONLY June 3 – June 10, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE ONLY August 5 – August 12, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE ONLY September 30 – October 7, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE ONLY December 2 – December 9, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Pelzer, SC March 25, 2021 For: East Coast Spring Construction & Transportation Public Auction • Greenwood, NE April 10, 2021 For: Heavy Construction Equip, Agricultural Machinery, Truck & Trailer Public Auction • Stanton, TX April 14, 2021 For: Permian Basin Unreserved Public Auction • Liberty, OH April 22, 2021

• Cope, SC Sat., March 13, 2021 For: LowCountry Heavy Equipment Public Auction • Barnwell, SC Wed., April 14, 2021 For: One-Owner Liquidation Public Auction for SRA Track LLC • Blairsville, GA Sat., April 24, 2021 For: North Georgia Springtime Public Auction LLOYD MEEKINS & SONS AUCTION CO. www.meekinsauction.com 800-499-6560 • Lumberton, NC Tues., April 6, 2021 For: Heavy Equipment Public Auction

• ONLINE ONLY Tues., March 30, 2021 For: Government Auction • ONLINE ONLY Wed., March 31, 2021 For: Ag Equipment Auction • ONLINE ONLY Thurs., April 1, 2021 For: Truck & Trailer Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN March 13, 2021 For: Heavy Machinery Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811

• ONLINE ONLY March 1 - 11, 2021 For: Farm Equipment Auction

• ONLINE ONLY Tues., March 16, 2021 For: Live Virtual Farm & Construction Equipment Auction

• ONLINE ONLY March 9-18, 2021 For: Farm Equipment Auction

• ONLINE ONLY Tues., March 23, 2021 For: Live Virtual Farm & Construction Equipment Auction • ONLINE ONLY Tues., March 30, 2021 For: Live Virtual Farm & Construction Equipment Auction MOTLEYS INDUSTRIAL www.motleys.com 1-877-MOTLEYS • ONLINE ONLY Tues., March 16, 2021 For: Construction Equipment & Trucks, Trailers, Dozers, Tractors, Crawlers, & More! PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Tues., March 9, 2021 For: Government Auction • ONLINE ONLY Wed., March 10, 2021 For: Vehicles and Equipment Auction • ONLINE ONLY Thurs., March 9, 2021 For: Construction Equipment Auction • ONLINE ONLY Tues., March 16, 2021 For: Lawson Steel Erection Company Retirement Auction • ONLINE ONLY Wed., March 17, 2021 For: Ag Equipment Auction • ONLINE ONLY Thurs., March 18, 2021 For: Truck & Trailer Auction • ONLINE ONLY Tues., March 23, 2021 For: Kansas Department of Transportation Auction

• ONLINE ONLY March 18, 2021 For: AgIron Litchfield Event • ONLINE ONLY March 19 - 29, 2021 For: Kibble Equipment Auction • ONLINE ONLY March 23 - 30, 2021 For: Farm Retirement Auction • ONLINE ONLY March 24-30, 2021 For: Farm Retirement Auction • ONLINE ONLY March 24 - 31, 2021 For: Steffes Construction Consignment Auction • ONLINE ONLY April 1-9, 2021 For: Farm Retirement Auction • ONLINE ONLY April 14-21, 2021 For: Farm Retirement Auction • Sidney, MT April 21, 2021 For: Rental Services Retirement Auction WILSON AUCTION & REALTY CO., LTD. www.wilsonauctionltd.com 419-636-5500 • Harrington, DE Sat, March 20, 2021 For: Mid-Atlantic Spring Equipment Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Findlay, OH March 11, 2021 For: Heavy Equipment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 83

Page 84 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Yoder & Frey Conducts Its 47th Annual Florida Auctions

oder & Frey held its 47th annual Florida Auctions Feb. 10 through Feb. 13 in Kissimmee, Fla.

Calvin Group President Mark Pentz stopped in at the Yoder & Frey auction from Colorado.

The four-day auction featured a wide array of heavy equipment: • Day one offered ATVs/brooms/sweepers, rollers, skid steer loaders, backhoe loaders, wheeled loaders, telehandlers, loader attachments, garage/forestry equipment. • Day two offered site dumpers/tracked dumpers, articulated dumpers, motor graders, generators, dozers, cranes, manlifts, crushers/screeners/conveyors, pavers/milling machines/asphalt distributors, trenchers, engines. • Day three offered mini-excavators, 6-ton excavators, 10-ton excavators, 20-ton excavators, wheeled excavators, engines/new/second buckets, hammer/excavators attachments/misc.; and • Day four offered tractors, forklifts, cars, pickups, dump trucks, tractor units, water wagons/water trucks and trailers. Yoder & Frey ensured a safe bidding environment over the course of the four-day sale.  CEG see Y&F page 86

Reading up on their machines of choice to bid on are Bob Rowean (L), RP Rowean Excavating, Norfolk, Mass., and Tom Haluch, Haluch Contracting, also in Norfolk.

Holland Equipment Service’s Tyler Miller (L) and brother-inlaw, Andrew Geurink, consider a bid in this John Deere 544J wheel loader.

(L-R): Yoder & Frey’s Chris Deason answers questions from customers Kenny Upchurch and Kenneth Kelly of Bradley Built Inc., Angier, N.C.

Brian Hall (L) and Bryce Davis (R) of LeeBoy speak with CEG’s Kent Hogeboom at the Yoder & Frey sale.

Husband and wife team Rachel and Jacob Hyatt of JDH Trucking & Excavating, based in Asheville, N.C., inspect this Komatsu D61 PX dozer at the auction.

Dan McHugh of Brookside Equipment in Massachusetts looks to replenish his inventory of quality low-hour machines for sale.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 85

With Extensive Four-Day, Mid-February Sale in Kissimmee

Getting a bit of air under this Kobelco excavator during his inspection is a buyer from Chin’s Construction, Kingston, Jamaica. Joyce and Chris Badenhop were looking for equipment to use at their ranch in Hernando, Fla.

Ronnie Newnan of Winter Park, Fla., hopes to bring home this John Deere 244J compact loader.

The construction market in Florida is red hot and good clean machines are in short supply. Checking out this John Deere 317 skid steer are Ronnie Watkins (L), Ocala, Fla,. and Nevin Mathews, The Villages, Fla. (L-R): U.S. Equipment Global’s Lawrence Gill talks equipment with Jason and Rick Svonavec of Heritage Coal & Natural Resources, based in Pittsburgh, Pa.

A good lineup of Volvo asphalt rollers get ready to take the ramp.

Rick Hohenbrink of Hohenbrink Excavating came in from Ohio to take in the auction activities.

KGM Contractors’ Gary Abramson (L) and Travis Hjelle from Angora, Minn., take the measurements of this Caterpillar 330F excavator.

Page 86 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Yoder & Frey Auctions Off Wide Array of Iron to Eager Buyers Y&F from page 85

A large selection of compact excavators went up for bid.

Jaime Arango of EV Equipment puts a Caterpillar 259D skid steer through its paces. This Cat 745C was only one part of a great lineup of articulated trucks at this year‘s Yoder & Frey auction.

(L-R): Yoder & Frey’s Josh Schott, Trent Shaftner and Chris Deason worked to keep the auction running smoothly.

Matt Hottstetter keeps the auction action humming along during the Yoder & Frey sale. Ed Lewandowski (in cab) of Waterford Materials, Waterford, Pa., is joined by brother Joe Lewandowski, NCP Equipment, Wyalusing, Pa.; Rusty Garrison, Waterford Materials; and Joe’s son, Joey L., to review the excavators. Acres of engines await new owners.

As day one begins, a Towmaster sweeper goes over the ramp.

This Caterpillar D8T is one of many dozers to go on the auction block.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 87

Page 88 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Hosts ‘Hybrid-Style’ Six-Day Orlando, Fla., Auction Ritchie Bros.’ February Florida auction is a destination event for equipment buyers and sellers, attracting thousands of people from around the world to the Sunshine State. This year, with COVID-safety its focus and a wealth of technology in its toolkit, Ritchie Bros.’ conducted a hybrid-style event in Orlando, Fla. — equipment stored onsite with 100 percent online bidding to ensure safety, while adding new services and data tools to drive buyer demand. The result was a spectacular success, as the company sold more than 12,000 items in six days for more than $191 million, making it the largest-ever 100 percent online equipment auction. “Ritchie Bros. continues to innovate and drive unprecedented demand, resulting in strong pricing across every asset category last week in Orlando,” said Ann Fandozzi, chief executive officer, Ritchie Bros. “This continues the positive pricing trend we saw at the end of 2020 and earlier in February in Houston, Texas. For the Orlando sale, we saw particularly strong price performance for truck tractors, skid steers and loader backhoes, followed closely by wheel load-

ers, aerial equipment and dozers. “Despite the uncertainty in the world, Ritchie Bros. continues to deliver outstanding results thanks to our dedication to customer success, investment in technology, world-class customer services and a deeply-ingrained innovative spirit.” The Feb. 15 to 20, 2021, auction attracted more than 22,700 online bidders from more than 80 countries, setting a new record for the Orlando site. The company also set new records for online page views (more than 2.9 million and up 18 percent YOY), watchlist adds (more than 177,000 and up 54 percent YOY), and PriorityBids (more than 53,700 and up 316 percent YOY). “Orlando is more than an auction — it’s an event our customers rely on for the success of their businesses and we take this responsibility seriously,” added Fandozzi. “We introduced new services this year to help customers unable to travel safely to inspect equipment in-person, including thousands of inventory videos, new data tools to help customers better understand market pricing, and scheduled pickups and inspection times. The more informed our

customers are, the more confident they will be when bidding.” While the auction was conducted 100 percent online, Ritchie Bros.’ Orlando site was still packed with the best selection of equipment anywhere. Two hundred acres and more than 12,000 items, including 540 excavators, 330 compactors, 280 skid steer loaders, 230 wheel loaders, 180 dozers, 740 aerial work platforms and 430 truck tractors. Specific sales highlights included a 2017 Peterson 5710D crawler horizontal grinder that sold for $630,000 to an online buyer from Georgia; a 2016 Caterpillar 374FL hydraulic excavator that sold for $460,000 to an online buyer from Michigan; and a 2012 Kobelco CK1600G 160-ton selferecting crawler crane that sold for $435,000 to an online buyer from Florida. Approximately 82 percent of the equipment in the Orlando auction was purchased by U.S. buyers, including 18 percent purchased by Floridians. The remaining 18 percent of the equipment was sold to international buyers from as far away as Australia, Germany, Egypt and Korea. International sales highlights included a

Grove GMK6250L 250-ton all-terrain crane that sold for $400,000 to a buyer from Trinidad and Tobago and a 2018 Caterpillar D8T dozer that sold for $260,000 to a buyer from Australia. Ritchie Bros. delivered strong results for more than 1,000 consignors who sold in the Orlando auction, including B&G Equipment and Supply from Alabama and Rock Transport from Indiana. “We traditionally do well in Orlando and this year didn’t disappoint as we exceeded our expectations by 15 percent,” said Dave Sides, Fleet Coordinator of B&G Equipment Supply. “Ritchie Bros. is a leader in the industry. They attract the largest audience. So, I’m not surprised they continue to deliver great results.” “We’ve done some smaller auctions with Ritchie Bros. in the past and had success, so we tried a larger package with Orlando this year and achieved substantially more than we expected,” said Bill Meador, president of Rock Transport. “Ritchie Bros. works hard and is extremely transparent — no games, no gimmicks, just results.” For more information, visit www.RitchieBros.com. 

Robots Allow Operators to Run Multiple Pieces of Equipment Simultaneously ROBOTICS from page 8

ment,” said Gaurav Kikani, Built Robotics’ vice president. “Our technology is compatible across all kinds of construction equipment manufacturers, including Caterpillar and Deere.” The company creates an AI Guidance System, a set of hardware and software components that it installs on almost any piece of heavy equipment for complete autonomous control, while preserving manual operation. When asked how humans interact with the Built Robotics system, Kikani said, “Human operators traditionally run the equipment using their eyes and ears. Similarly, the robot uses sensors to understand the environment and relate it to the instructions it has been given. You can tell it to dig a trench from Point A to Point B with prescribed parameters. The robotic equipment operator presses ‘Go’ and the robot delivers the work over the course of the day, so the humans can work on other

jobs on the site.” Built Robotics doesn’t sell construction equipment, but automates conventional equipment with its software. “We install our hardware and provide software so that you don’t need anyone running the robot. You set it up and press ‘Go’ and the excavators will do the work,” Kikani said. The software works on modern equipment that has hardware kits with electronic controls, although Kikani said, “We can upgrade older equipment so that it can do the work as well.” Parker noted that Built Robotics oversees the way his employees operate the robot-enhanced equipment. “Built Robotics partners with us to train employees to interact with the equipment. They are experts in designing the user interface and ensuring operators know how and when to use the technology.” The use of robotic equipment on the job also improves safety. Having fewer employees near the trench that the

autonomous excavator is digging reduces risk. While Built Robotics’ technology has been used for earthmoving work, thus far it is likely to be used for other construction applications soon. “Excavators are the core of our fleet and our technology today, but there’s more we can do,” Kikani said. “The potential is there.” In the meantime, Mortenson will utilize Built Robotics enhanced equipment for earthmoving in new areas. “We will be using robotics on a solar project digging trenches for cabling in Texas,” Smith said. When asked how the use of robots impacts human participation in construction jobs, Parker said, “It’s more of a supplement to the staff. For the staffing on remote sites, we can have operators run multiple pieces of equipment.” He also said the company may seek to hire a new kind of worker, a robotic equipment operator.  CEG

29TH ANNUAL SPRING AUCTION

EXCESS EQUIPMENT AUCTION

DSA Auction Complex 6531 S. St. Sd. 13 • Pentleton, IN

3D COMPANY 7230 North State Road 3 • Muncie, IN 47303

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 89

APRIL 1ST 2021 • 10AM

FRIDAY, MARCH 26TH • 9:00 A.M.

**Note: Running Three (3) Rings

ABSOLUTE EQUIPMENT AUCTION APRIL 8TH 2021 • 10AM CST

DBS CONSTRUCTION 952 Crown Court • Crown Point, IN 46307

BID LIVE ONLINE! Can’t Make it to the Auction?

Sale Site Phone: 888-841-7386 Live or Online at proxibid.com/dsa Visit our website for terms and conditions Auctioneer: Nic Smock– Lic. #AU10500037

dsaauctions.com

Page 90 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SON INC ......................................................................83,87 ALEX PARIS CONTRACTING CO INC ....................................................10 ALLIED CONSTRUCTION PRODUCTS ..................................................35 ALTA EQUIPMENT COMPANY ................................................................92 AMERICAN STATE EQUIPMENT ..............................................................7 AMULET ..............................................................................................56,58 ASCENDUM MACHINERY INC ................................................................11 BANDIT INDUSTRIES INC ..................................................................32,33 BANE-WELKER ........................................................................................27 BARGAINS................................................................................................79 BLUE RIDGE TRACTOR ..........................................................................52 BOMAG AMERICAS INC ..........................................................................16 BROOKS TRACTOR ................................................................................19 CEG SCALE MODELS ............................................................................26 COMPANY WRENCH ..............................................................................16 CONSTRUCTION EQUIPMENT GUIDE ........................................44,74,81 CSTK JCB ................................................................................................22 CUSTOM MADE PRODUCTS ..................................................................52 DON SMOCK AUCTION CO ....................................................................89 DOOSAN..............................................................................................20,21 DOOSAN PORTABLE POWER ................................................................64 ERB EQUIPMENT COMPANY....................................................................9 ESCO CORP ............................................................................................59 FABICK CAT................................................................................................2 FAE USA INC ............................................................................................40 FARM-RITE EQUIPMENT INC ................................................................14 FELLING TRAILERS............................................................................70,71 FINKBINER EQUIPMENT CO ....................................................................7 FLANGE LOCK ........................................................................................62 FOLEY EQUIPMENT CO..........................................................................15 GARY CARLSON EQUIPMENT ..............................................................25 GROVE WORLDWIDE..............................................................................63 HITACHI CONSTRUCTION MACHINERY ..............................................65 HYUNDAI CONSTRUCTION EQUIPMENT ........................................46,47 ILLINOIS TRUCK & EQUIPMENT ..............................................................3 IRAY AUCTIONS INC................................................................................88 JEFF BELZER ..........................................................................................78 JET TRAILERS ........................................................................................78 JJ SCHECKEL CORP ..............................................................................23 JOHN DEERE ..........................................................................................51 KIRBY-SMITH MACHINERY INC..............................................................17 KLEEMANN ..............................................................................................43

KOBELCO CONSTRUCTION MACHINERY ......................................66,67 KOMATSU AMERICA CORP ..............................................................52,53 KPI-JCI ......................................................................................................45 KUBOTA EXCAVATOR..............................................................................50 KUBOTA SVL ............................................................................................54 LABOUNTY MANUFACTURING INC ......................................................58 LARMEE EQUIPMENT & SUPPLY ..........................................................28 MAGELLAN CONSTRUCTION ................................................................61 MAVERICK ENVIRONMENTAL ................................................................37 MCCANN INDUSTRIES INC ......................................................................6 METSO OUTOTEC ..................................................................................31 MID COUNTRY MACHINERY ..................................................................73 MILLER BRADFORD & RISBERG ..........................................................34 NATIONAL ATTACHMENTS ....................................................................56 NORAM ................................................................................................48,49 PAT KELLY EQUIPMENT CO INC............................................................28 POWERSCREEN MW DEALER GROUP ................................................42 RACKERS EQUIPMENT CO ....................................................................35 RITCHIE BROS. AUCTIONEERS ............................................................91 ROAD BUILDERS MACHINERY ..............................................................13 ROLAND MACHINERY INC........................................................................5 SANY AMERICA INC ................................................................................62 SCHAEFER ENTERPRISES ....................................................................56 SENNEBOGEN ........................................................................................39 STAR EQUIPMENT LTD ............................................................................6 SUMMIT SUPPLY LLC................................................................................6 TERAN INDUSTRIES INC ........................................................................57 TEREX FUCHS ........................................................................................41 TOWMASTER INC. ..................................................................................77 TRI-STATE TRAILER SALES ..................................................................75 VICTOR PHILLIPS AN EQUIPMENTSHARE CO ....................................27

OHIO STATE SUPPLEMENT BOBCAT ENTERPRISES ........................................................................................5 COLUMBUS EQUIPMENT CO ................................................................................8 EQUIPMENT CORP OF AMERICA ........................................................................5 GORILLA HAMMERS ..............................................................................................1 JCB OF OHIO ..........................................................................................................2 SOUTHEASTERN EQUIPMENT CO ......................................................................3 THE MCLEAN CO....................................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2021 • Page 91

Unreserved public equipment auctions

Equipment financing by equipment experts.

2015 KPI/JCI FT4250 Closed Circuit | North Franklin

Ingersoll-Rand DD12 | North Franklin

2017 Case 580N Series 2 | North Franklin

Grove RT760E2 | Northeast Regional Event

1 of 2 – John Deere 410K Northeast Regional Event

2014 Caterpillar 963D Northeast Regional Event

2017 Volvo L60H | Midwest Regional Event

2016 Hoist P360 36000 Lb Midwest Regional Event

1 of 2 – Mack RD688S Midwest Regional Event

2016 Caterpillar TL1055D 10000 Lb 4x4x4 Midwest Regional Event

2015 Caterpillar 982M Midwest Regional Event

71,640+ items in 140+ auctions including Los Angeles, CA Northeast Regional Event Chehalis, WA North Franklin, CT Atlanta, GA

Mar 19 Mar 23–24 Mar 25 Mar 25 Mar 26

Birmingham, MO Las Vegas, NV Nashville, TN Midwest Regional Event Sacramento, CA

IMPORTANT MESSAGE: Due to COVID-19, all of our auctions are now online bidding only. For the most up-to-date information visit rbauction.com/covid-19

Mar 26 Mar 26 Mar 30 Mar 30–31 Mar 31

Online bidding information

Financing & leasing available

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com

Auction Company Bond #0470724, Auctioneer Trevor J. Moravec Bond # 0466225, Motor Vehicle Dealer License #DLR25867, Auctioneer Steve A Seykora # 74-19-006, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auction Company License # 001348, Auctioneer Frederick R. Vilsmeier # AUNR003087, Auctioneer James L. Valentine #5623, Auctioneer Kevin L. Perry # 2763

Page 92 • March 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Looking to try before you buy? Right now, we’re offering 20% OFF* for all first-time Alta Equipment rental customers at any of our Illinois & Indiana locations. If it’s your first time to rent with us, mention this ad to get your toughest jobs done, save on your rental, and work confidently knowing your trusted Alta Equipment experts will get you exactly what you need to get the job done right. There’s never been a better time to rent reliable machines from Alta Equipment. Valid for all first-time Alta Equipment Illinois & Indiana rental customers only. Subject to credit approval. Must have a valid certificate of insurance naming Alta as additional insured/loss payee. Limit one rental per customer. Offer expires 3/31/2021.

RENT.ALTAEQUIPMENT.COM Ottawa, IL 815.313.2070

Bloomington, IL 309.585.3800

Orland Park, IL 708.349.8430

Spring Grove, IL 815.581.0071

South Elgin, IL 630.883.3320

Wauconda, IL 847.469.0120

Gary, IN 219.977.4210