Page 1

$3.00

Published Nationally

Midwest Edition

®

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

February 18, 2012 • Vol. IXX • No. 4 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 • www.constructionequipmentguide.com

Inside

Scharber & Sons Hosts Open House...10

Quake Damage...

Indiana Road Repairs Washington Stay on the Fast Track Monument Gets Walsh Construction replaces the bridge at I-74/Crawfordsville Rd.

$7.5M Repairs By Brett Zongker ASSOCIATED PRESS

Street interchange. The project also involves rebuilding four over-passing bridges and constructing six major interchanges — one with 10 ramps. Accelerate 465 is a response to increased traffic demands and safety requirements on this segment of I-465. This $423 million project was needed to expand transportation

WASHINGTON (AP) Despite a billionaire history buff’s pledge of $7.5 million to speed up repairs on the Washington Monument, officials say the complex work could last until August 2013, or two years after the landmark was damaged by an earthquake. Businessman David Rubenstein said he was inspired to help fund the repairs to the 555-ft. (170 m) obelisk when it became clear how severely damaged it was by a 5.8-magnitude earthquake Aug. 23. The National Park Service and nonprofit Trust for the National Mall announced Rubenstein’s gift Jan. 19. It is the largest gift to the nonprofit group that is working to restore the mall. The repair job will be no easy task, though. A design process is under way to determine how to do the work, and federal officials hope to award a contract by August to begin construction. From there it will take about a year, according to the best estimates. The repairs may involve building huge scaffolding around the monument, as was the case during a restoration project from 1999 to 2001. Officials said they do not yet know whether scaffolding will be nec-

see ROADS page 34

see MONUMENT page 20

World Of Concrete 2012 Opens in Las Vegas...16

By Jennifer Rupp CEG CORRESPONDENT Ale x Lyon & Son St arts Fl orida A ucti ons.. .86

Table of Contents ........ 4 Excavators & Attachment Section ..............................35-59 Paving Section .... 69-79

Accelerate 465 is an Indiana Department of Transportation (INDOT) project to reconstruct an 11-mi. (17.7 km) corridor of Interstate 465 on the west side of Indianapolis between State Road 67/Kentucky Avenue to north of the 56th

Crumbling Minn. Capitol Reaches ‘Tipping Point’ By Alexandra Tempus ASSOCIATED PRESS

Auction Section ....86-99 Business Calendar ......97 Advertisers Index ......98

ST. PAUL, Minn. (AP) The foot-tall chunk of marble sitting in a state administrative office once was part of the Minnesota Capitol’s ornamental scrollwork, one small detail on architect Cass Gilbert’s century-old jewel. Now, it’s mainly a reminder of this

aging building’s many deferred needs. Time has eroded the marble’s fine detail to the point that it’s barely visible. It was plucked off the building by hand during a recent inspection of the Capitol exterior, and conservators say it’s just a small example of $241 million in urgently needed restoration work that will only grow more expensive with time. “They’re big projects, they’re scary proj-

ects, they’re inconvenient projects,” said David Hart, a Utah-based consultant to the Minnesota State Capitol Preservation Commission. “But they’re projects that have to happen. It’s time.” The spending would address a lack of fresh air circulation, outdated plumbing and tangled electrical wiring so systematic that only a see CAPITOL page 68


Page 2 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call 877-688-2228 Fax: 630-279-9243 www.pattencat.com Complete inventory available online

MOTORGRADERS

SKID STEERS

Cat 140M, 2008, N5749, EROPS, A/C, Heat, Ripper........$285,000

Cat 226B2, 2009, W2130 NA, EROPS, Hyd QC ................$29,000 Cat 252B2, 2005, UE1485, EROPS, Heat ..........................$26,500

COMPACTION

Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000 Cat CP433E, 2005, UN2062, OROPS ................................$58,000

PATTEN CONSTRUCTION PRODUCTS

Cat 236B, 2007, UE1540, OROPS, Self-Lev, Hyd QC ........$18,500 Cat 236B, 2007, UE1541, Heat, 2 Speed ..........................$19,500

ID# N4761 $49,000

Cat CS54, 2008, N5757, OROPS, Sm Drum ....................$115,000 Cat CS-433E, 2005, UN2129, OROPS................................$48,000

Cat 236B, 2006, UE1542, OROPS, Self-Lev ......................$18,000 Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ............$36,000

TRACK LOADERS

Cat 256C, 2007, W1533, EROPS, Heat, A/C ......................$32,000 Cat 256C, 2007, W1531, EROPS, Heat, Hyd QC, SF Hyd ..$34,000

Cat 953C, 2006, N4908, EROPS, A/C, GP Bkt....................$80,000

Cat 257B, 2005, W0539, Self-Leveling, Man QC ..............$27,000

Cat 953C, 2006, N4827, EROPS, A/C, GP Bkt ..................$80,000

Cat 257B, 2007, W1522, EROPS, Heat ..............................$29,000

ID# UN1922 $122,000

Cat 953C, 2006, N4907, EROPS, 2.25 CYD GP Bkt ..........$85,000

Cat 272C, 2007, W1905 NA, EROPS, Heat, A/C ................$42,000

Cat 963C, 2005, N4354, EROPS, A/C, GP Bkt ................$125,000

Cat 287B, 2007, W1561, Self-Leveling, Man QC ..............$39,000

Cat 963C, 2007, N5363, EROPS, 3 CYD GP Bkt ..............$145,000

Cat 289C, 2009, W2058, EROPS, Heat, A/C ......................$48,000

Cat 963D, 2008, N5718, EROPS, GP Bkt ........................$170,000

Cat 289C, 2009, W2115, EROPS, Heat, Hyd QC ................$57,000

Cat 963D, 2008, N5643, EROPS, Heat ............................$180,000

Cat 297C, 2007, W1548 NA, EROPS, SF Hyd, Hyd QC ......$50,000

TELEHANDLERS

DOZERS

Cat TH360B, 2006, N4761, EROPS, Heat, A/C ..................$49,000

Cat D4G LGP, 2006, N4970, EROPS, A/C ..........................$65,000

WHEEL LOADERS/LOADER BACKHOES

Cat D5G LGP, 2006, N4976, EROPS, Heat ........................$84,000 Cat D5G XL, 2007, N5413, EROPS, Heat, A/C ..................$80,000 Cat D5G XL, 2007, N5469, EROPS, Heat, A/C ..................$75,000

Cat 416E, 2007, N5303, EROPS, Heat, A/C, E-Stick ..........$78,000

ID# N5591 $180,000

Cat 420E IT, 2008, UE1253, EROPS, Heat, A/C, E-Stick ....$70,000

Cat D5G XL, 2007, N5601, EROPS, Heat, A/C ..................$80,000

Cat 430E, 2007, N5471, EROPS, Heat, A/C, Ride Cntrl......$80,000

Cat D6K XL, 2007, N5337, EROPS, 4th Valve..................$135,000

Cat 430E, 2007, N5415, EROPS, Heat, A/C, QC ................$96,000

Cat D6N XL, 2007, N5477, EROPS, Heat, A/C ................$190,000

Cat 430E IT, 2006, N5209, EROPS, A/C, E-Stick................$56,000

Cat D6N XL, 2007, N5335, EROPS, 4th Valve, PAT Blade$165,000

Cat 906H, 2009, UE1497, EROPS, Ride Ctrl, QC ..............$68,000 Cat 924GZ, 2007, N5786, EROPS, Heat, Ride Control ....$100,000

EXCAVATORS Cat 303.5C CR, 2007, W1167, EROPS, A/C ......................$34,000

Cat 924GZ, 2008, N6148, EROPS, Heat, A/C, 2.6 CuYd Bkt ....$94,000

ID# N5749 $285,000

Cat 304CCR, 2006, W0930, OROPS, 2-Way Aux Hyd ......$43,000

Cat 924H, 2007, N5786, EROPS, Heat, A/C, 2.6 CYD Bkt$100,000 Cat 930G, 2006, UN1922, EROPS, Heat, A/C ..................$122,000

Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ..........$36,000

Cat 930G, 2007, N5772, EROPS, 2.9 CYD Bkt, Ride Cntl ..$115,000

Cat 315CL, 2006, N4867, EROPS, Heat, A/C, QC ..............$78,000

Cat 930H, 2008, N5661, EROPS, Ride Cntl ........................$132,000

Cat 315CL, 2007, N5239, EROPS, 10’2” Stick, QC ............$80,000

Cat 938GII, 2006, N5064, EROPS, A/C, Heat, Ride Cntrl $100,000 Cat 938GII, 2006, UE1454, EROPS, Heat, A/C ................$105,000

Chad Benz 630-758-1226 benzc@pattenindustries.com

Cat 950H, 2007, N5284, EROPS, Heat, Ride Cntrl ..........$175,000 Cat 950H, 2007, N5594, EROPS, Heat, Ride Cntrl ..........$190,000

ID# N5413 $80,000

CALL 887-688-2228

Cat 980H, 2008, UE1484, EROPS, Heat, A/C ..................$364,000

INVENTORY CHANGES DAILY


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 3

Lar Largest arrg gest Independent Rental R F Fleet in the Midwest!!

Over 600 units available for rent!! Including: ncludi 100 Hydraulic Hy Excavators 50 Bulldozers 50 Wheel Loaders 30 Articulated Dump p Trucks Trucks r

S Service ervice

Parts Parts

Factory F actorry T Tr Trained rained S Service ervicce Technicians, Complete Rebuild T echnicianss, C omplette R ebuild Services S ervices & Welding Welding

Authorized Authorized Dealer Dealer for LaBounty, LaBountty, Kobelco K Kob obelco and and Kawasaki K Kaw aw wasaki

Illinois T Truck ruck & Equipment 320 Briscoe Drive Morris, Illinois 60450 T Toll oll Free: (800) 941-2133 941 Fax: (815) 941-1486 Email: sales@iltruck.com


Page 4 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION Circulated Throughout

®

IN THIS ISSUE 35

SPECIAL SECTION…

35

EXCAVATORS AND ATTACHMENTS

Be sure to check out this special section! Keep up to date with the latest information on excavators and attachments.

Founder, Publisher & CEO Vice President Emeritus Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

FEATURES…

10

CUSTOMERS, VENDORS MEET AT SCHARBER & SONS OPEN HOUSE As in the past with the company’s open house, Scharber & Sons invited members of the Minnesota State Patrol to make a safety presentation on commercial truck regulations.

16

WORLD OF CONCRETE 2012 SEES INCREASED ATTENDANCE

The well-known industry show launched a wide array of new products, equipment and events; presented more than 100 seminars in the Education and Certification Program; and provided valuable networking opportunities for exhibitors and attendees.

10

28

MURPHY TRACTOR & EQUIPMENT CO. ADDS NEW STORES IN OHIO The recent acquisition, which took effect on Feb. 6, brings the total of Murphy Tractor & Equipment Company, Inc. locations to 28.

30 32

TITAN MACHINERY, G & B CONSTRUCTION TEAM UP TO DO JOB RIGHT

The $125 million maximum security prison project began in January 2011 and is slated for completion in July 2013.

86

ANNUAL FLORIDA AUCTIONS KICK OFF WITH ALEX LYON & SON IN KISSIMMEE

Over the first two days of the auction, thousands of lots of new and like new tools were sold, as well as generators, skid steer attachments, utility tractors and more.

90

For advertising rates Contact

Edwin M. McKeon Sr. Hal Ewing Joseph S. McKeon Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon •Illinois •Wisconsin •Northwest Indiana •Missouri •Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

Contact

Ed Bryden •Central and Eastern Indiana •Michigan •Ohio •Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel •Iowa •Minnesota •Nebraska •North Dakota •South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

WIDE VARIETY OF EQUIPMENT UP FOR SALE AS YODER & FREY HOLDS FLORIDA AUCTIONS

The first day saw motorgraders, asphalt rollers and pavers, concrete equipment, sweepers and vacuum trucks go on the block.

86

83 CLASSIFIEDS 96 COMING AUCTIONS 97 BUSINESS CALENDAR

EQUIPMENT… 90

Web site Editorial e-mail Advertising e-mail

PATTEN CAT APPOINTED NEW MB ATTACHMENTS DEALER

Len Scala, Patten Industries equipment sales operations administrator, first discovered the MB attachments in the summer of 2011, while researching another project.

16

Toll Free Fax

•North & South Dakota •Nebraska •Kansas •Minnesota •Iowa •Missouri •Illinois •Wisconsin •Michigan •Indiana •Ohio •Kentucky

68 BOBCAT E32, E35 Compact Excavators 87 ATLAS COPCO QAS 45 Portable Generator

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 5

We Buy USED Equipment – One Piece or Entire Fleets – Call Jay Germann

Komatsu D65PX-12, ’97, 8,120 hrs ........$54,500

Komatsu D155AX-5, ’03, 6,809 hrs ......$224,500

BACKHOE LOADER

DOZERS

WHEEL LOADERS

Komatsu WB140-2N, ’04, 2,805 hrs ..................$CALL

Case 850K XLT, ’04, 2,646 hrs ........................$47,500 Cat D4C LGP, ’98, 4,617 hrs ............................$24,500 Cat D5C, ’97, 6931 hrs ....................................$26,500 Cat D5K LGP, ’09, 1,622 hrs ..........................$104,500 Komatsu D32P-1, ’98, 5,422 hrs ....................$14,500 Komatsu D37P-5, ’94, UKN hrs ......................$18,500 Komatsu D37P-5, ’98, 2,624 hrs ....................$21,500 Komatsu D39E-1, ’98, 6,585 hrs ....................$29,500 Komatsu D39P-1, ’97, 6,189 hrs ....................$27,500 Komatsu D39EX-21A, ’05, 1,176 hrs ..............$57,500 Komatsu D51PX-22, ’08, 2,436 hrs ..............$129,500 Komatsu D61EX-15, ’05, 4,778 hrs ..............$114,500 Komatsu D65EX-15, ‘05, 5,312 hrs ..............$129,500 Komatsu D65PX-12, ‘96, 4,969 hrs ................$49,500 Komatsu D65PX-12, ’97, 8,120 hrs ................$54,500 Komatsu D85E-12, ’78 ....................................$24,500 Komatsu D155AX-5, ’03, 6,809 hrs ..............$224,500

Case 621, ’89, 5969 hrs ..................................$24,500 Cat 926, ’86, 15,870 hrs ..................................$26,500 Cat 980F, ’92....................................................$83,500 Cat 980G, ’03, 15,594 hrs..............................$124,500 Dresser 540, ’89, 4,082 hrs ............................$24,500 Komatsu WA200-5, ’05, 617 hrs ....................$97,500 Komatsu WA320-6, ’08, 3961 hrs ................$126,500 Komatsu WA380-5, ‘06, 4965 hrs ................$132,500 Komatsu WA400-5L, ’04, 7,169 hrs ................$94,500 Komatsu WA420-1, ’88....................................$39,500 Volvo L220E, ’03, 15,335 hrs ..........................$49,500

COMPACTION, MILLING & PAVING Blaw Knox PF510, ’93, 2,721 hrs ....................$11,500 Cat C563, ’94, 5,794 hrs..................................$31,500 Gehl 1649 Paver, ’01, 433 hrs ........................$24,500 Hamm 3307, ’03, 687 hrs................................$33,500 Hamm HD14VV, ’08, 816 hrs ..........................$32,500 Hamm HD14VT, ’09, 1,083 hrs ........................$32,500 Hypac C747B, ’01, 3,524 hrs ............................$9,500 LeeBoy 1000D, ’03, 1,475 hrs ........................$19,500 LeeBoy 8500LD, ’00, 1,535 hrs ......................$29,500 LeeBoy 8500LD, ‘04, 2,739 hrs ......................$26,500 LeeBoy 8500LD, ’04, 1,823 hrs ......................$24,500 LeeBoy 8510LD, ’06, 306 hrs ..........................$74,500 LeeBoy 8515, ’00, 1,303 hrs ..........................$53,500 Rosco TRUPAC915, ‘05, 481 hrs ....................$32,500 Vogele SUPER 700, ’07, 80 hrs ........................$CALL Wirtgen W1200F, ’05, 3,150 hrs ........................$CALL Wirtgen W2000, ’03, 2,996 hrs..........................$CALL Wirtgen W2000, ’96, 9,346 hrs..........................$CALL Wirtgen WR2000, ’11, 334 hrs ..........................$CALL Wirtgen WR2500S, ’07, 3,100 hrs ....................$CALL

OFF ROAD TRUCKS Komatsu HD785-5, ’01, 22,508 hrs....................$CALL Komatsu HD785-5, ’01, 25,415 hrs....................$CALL

EXCAVATORS Case CX240B, ’07, 4810 hrs..........................$114,500 Komatsu PC138USLC-8, ’09, 2,363 hrs ........$104,500 Komatsu PC138USLC-2EO, ’07, 4377 hrs ......$69,500 Komatsu PC138USLC-8, ’07, 3935 hrs............$77,500 Komatsu PC150LC-6, ‘98, 9246 hrs ................$39,500 Komatsu PC160LC-7, ’06, 2,652 hrs ..............$97,500 Komatsu PC270LC-7, ’04, 4,608 hrs ............$124,500 Komatsu PC300LC-7, ’02, 4,887 hrs ............$134,500 Komatsu PC300LC-7EO, ‘06, 3,004 hrs ........$159,500 Komatsu PC300LC-7EO, ’06, 4,609 hrs ........$144,500 Komatsu PC300LC-7EO, ’07, 1,860 hrs ........$189,500 Komatsu PC300LC-7EO, ‘07, 1,230 hrs ........$189,500 Komatsu PC400LC-8, ’07, 2,811 hrs ............$239,500 Komatsu PC750LC-7, ‘05, 4,517 hrs..................$CALL

FORESTRY Fabtek 346B Forwarder, ’03, 8,978 hrs ........$112,000 Fabtek 344LB Forwarder, ’02, 13,200 hrs ......$42,000 Fecon FTX130-FM, ’06, 875 hrs ......................$86,500 Franklin 132XL Forwarder,..............................$16,000 Franklin 3000/Stroke Head, ’92 ........................$9,800 K-2 Four Wheel Forwarder, ’05, 2,160 hrs ..............$90,000 Log Lift F-135 Log Loader, ’05 ..................................$7,000 Valmet 840.3/8, ’05, 9,800 hrs ....................$165,000 Valmet 840.3/8, ’06, 9,592 hrs ....................$185,000 Valmet 901C/960, ’99, 13,000 hrs ..................$65,000

SHREDDERS, TROMMELS

Cat 980G, ’03, 15,594 hrs......................$124,500

V I S I T

Doppstadt DW3060K, ’09, 328 hrs ....................$CALL Doppstadt DW3060SA, ’09, 410 hrs ..................$CALL Doppstadt SM617, ’09, 290 hrs ........................$CALL Doppstadt SM720, ’09, 235 hrs ........................$CALL Doppstadt SM726, ’09, 257 hrs ........................$CALL

Komatsu PC300LC-7EO, ’07, 1,860 hrs ..$189,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M


Page 6 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Contact us at Used@McCannOnline.com

Serving the Constructor ®

View our complete Used & “Like New” inventory at McCannOnline.com

Q

Clean, reliable equipment2006QCase Competitive rates

Q

Rent by the day, Low week, Hour 2007or month

CX330, s/n N6SAP7025, 5100 Hrs, Cab w/Heat/AC, Boom 21’2”, Arm 13’3”, 31.5” -3-Bar Steel Shoes, Control Selector Valve, Kent Coupler $137,000

CX130 Excavator

Delivered to your2003 jobCase site

Atlas Copco Air Compressors, 6 to Choose from Starting at $7,500

CX160 Excavator

 MCrhEJHEFQUI $410/Day, $1,230/Week, $3,690/Month

Q

 MCrhEJHEFQUI 2002 Case 60XT, $475/Day, $1,425/Week, $4,275/Month s/n JAF0366125, 1950 Hrs, ROPS, Aux Hyds, 12 x 16.5 Foam Filled Tires, New 73” Bucket $15,000

580SM, s/n JJG0376197, 1700 Hrs, Cab w/Heat, 4-in-1 Bkt, 4 Lever, Ride Control, 12”, 24” and 36” Ditch Bkt $42,500

CX210 Excavator

CX225 Excavator

 MCrhEJHEFQUI 2008 Ausa $5,220/Month $580/Day, $1,740/Week, Dumper, 110 Hrs, 1.37 Cu Yrd Dumper, 13 HP Hatz Diesel, 2WD $7,000

 MCrhEJHEFQUI 1992 Case $755/ Day, $2,265/Week, $6,795/Month 1845C, s/n JAF0102708, 4966 Hrs, ROPS, Aux Hyds, 12 x 16.5 Foam Filled tires, 73” Bkt $9,000

Rent Today!

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110 McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana CX240 Excavator

CX330 Excavator

 MCrhEJHEFQUI $700/Day, $2,100/Week, $6,300/Month

 MCrhEJHEFQUI  MCrhEJHEFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Mustang 442 Skid Loader, 40HP, Open Canopy, Single Pin, I/D: 6419222308, 5252 Hrs, $8,995

Mustang MTL16 Track Loader, 67HP, Open Canopy, I/D: 300617, 1825 Hrs, $21,995

Gehl DL6, 6000# Lift, 42’ Boom, Open Canopy, Outriggers, I/D: 320796, 2770 Hrs, $35,950

Allen Engineering MSP415, 35HP, 4’ Rotors, I/D: 008005, 215 Hrs, $12,250

Elliott L40R, Hi-Reach Truck w/45’ Working Height, I/D: EX5186, 40 Hrs, $113,900

Mustang ME7503ZT, 16,000# Excavator, Cab, Heat, I/D: C03291, 1700 Hrs, $57,995

★ CONSTRUCTION

EQUIPMENT & SUPPLIES SINCE 1968

STAR EQUIPMENT LT D .

Call Sales 515-283-2215 • 800-352-5401 1401 2nd Ave • Des Moines, IA 50314 www.starequip.com

Des Moines • Ames • Cedar Rapids • Waterloo

Schererville* 219-865-6545 *Case authorized dealer location

CALL DOUG OR SAM (866) 485-7180 WWW.RBUSED.COM


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 7

1988 Cat 627E ........................................$85,000

1988 Cat 627E ........................................$85,000

Cat 426C ................................................$31,500

1994 CAT D4HXL ..................................$28,500

S/N 6GB00654, 22,350 hours, Erops, push pull, tires 2 good – 2 fair, retarder, p t guard

S/N 6GB00655, 22,447 hours, Erops, push pull, tires good, retarder, p t guard

S/N 6XN03727, 5174 Hrs, EROPS, E-Stick, 4x4, 24” Bkt, Tires Good

S/N 8PJ00616, 9847 hrs, Orops, 90% undercarriage remaining, V PAT BLADE

1995 CAT CB214C ................................$10,500

1979 Cat 631D ......................................$45,100

2003 Cat D8RII ....................................$239,000

1998 CAT D6RLGP ................................$82,000

S/N 9XK00201, 888 hrs, 39" roller, rops, working lights

S/N 24W02603, 9284 hours, orops, tires fair

S/N 6YZ01286, 11576 hrs,Erops, s u blade, new track groups, hydraulic ripper

S/N 8TM00531, 12,890 Hrs, EROPS, A/C, Pins & Bushings Turned at 12,842 Hrs, 6S LGP Blade

2006 Cat D5KLGP................................$115,000

1998 Cat IT28G......................................$47,500

1998 Cat D6RLGP..................................$75,000

2009 Gehl 7810E....................................$24,500

S/N YYY00151, 1504 hrs, Erops, A/C, 26” tracks, blade

S/N 8CR01529, 16,143 Hrs, EROPS, Std Differentials, Tires 50%, Bkt

S/N 9PN00987, 9119 hrs, Orops, Good U/C – turned, S blade, no leaks

S/N 905605, 4038 Hrs, EROPS, Heat, Manual Coupler, 2-Speed, No Bkt, Tires: 2 Good, 2 Fair

2006 Cat 216B ......................................$18,500

2000 CAT D5CXLIII................................$29,500

1977 Cat D6D ........................................$22,800

2008 Cat 272C........................................$33,500

S/N RLL03958, 1050 hrs, Orops, bucket, man quick coupler, heat, 1-speed

S/N 7PS01311, 3315 Hrs, EROPS, Undercarriage Fair

S/N 04X01976, 6041 Hrs, OROPS, S Blade with Hydraulic Tilt, 22” Pads

S/N RED00965, EROPS, A/C, Tires Fair, 1743 hrs, Hyd Quick Coupler

Please Contact Bob Williams or Jeff Speer

800/353-1944

414/461-9100

Outside WI & Upper Michigan

Within WI & Upper Michigan

11200 W Silver Spring Rd. Milwaukee, WI 53225

www.FABCO.com Hundreds of machines. Listings updated daily.


Page 8 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

2010 VOLVO L110F, Cab, A/C, Radio w/CD, Heated Air Susp. Seat, Boom Susp, 3rd Function, Hyd. Att. Bracket, Rev. Cooling Fan, Add’l. Work Lights, Block Heater, Care Track, Scale, 4.4 Cy. H/O STE Bkt, w/BOE, 23.5R25 Tires

WHEEL LOADERS 2004 VOLVO L60E, Cab, A/C, Contronics, Work Lights, Hyd. Attachment Bracket, 2.2 Cu. Yd. Bkt w/BOE, 20.5R25 Tires ....$72,500 2002 VOLVO L70D, Cab, Heater, Contronics, Work Lights, Hyd. Attachment Bracket, Front Differential Lock, 2.5 Cu. Yd. Bkt w/BOE, 20.5-25 Tires ....................................$58,000 2002 VOLVO L70D, Cab, Heater, Contronics, Air Susp. Seat, Work Lights, Boom Susp., Hyd. Attachment Bracket, Limited Slip Rear Differential, 2.5 Cu. Yd. Bkt w/BOE ................ ..........................................................$82,500 2003 VOLVO L70D, Cab, Heater, Contronics, Air Susp. Seat, Work Lights, Boom Susp., Hyd. Attachment Bracket, Limited Slip Differential, 2.5 Cu. Yd. Bkt w/BOE, 20.5-25 .. ..........................................................$87,500 2005 VOLVO L70E, Cab, A/C, Contronics, Work Lights, Hyd. Attachment Bracket, Front Differential Lock, 2.9 Cu. Yd. Bkt. w/BOE, 20.5R25 Tires ..................................$189,000 2006 VOLVO L70E, Cab, A/C, Contronics, Work Lights, Hyd. Attachment Bracket, Front Differential Lock, 2.9 Cu. Yd. Bkt. w/BOE, 20.5R25 Tires ....................................$79,000 2003 VOLVO L90E, Cab, A/C, Contronics, Work Lights, 3rd Function, Hyd. Attachment Bracket, Front Differential Lock, 3.5 Cu. Yd. Bkt w/BOE, 20.5-25 Tires ..................$92,000 2009 VOLVO L90F, Cab, A/C, Radio w/CD, Boom Susp., Caretrack, Hyd. Attachment Bracket, 3.5 Cu. Yd. Bkt, 20.5R25 Tires.......... ........................................................$165,000

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2009 VOLVO L220F, Cab, A/C, Radio w/CD, Boom Susp, CDC, Addit’l. Hyd. Oil Cooler Block Heater, Caretrack, 7.4 cy Bkt, 29.5R25 Tires

2008 VOLVO EC160C LC, A/C, 28” Pads, 9’10” Stick, Q/C Piping, Hammer/ Shear Piping, Pilor Pattern Control Change, Block Heater

(15) 2001-2008 VOLVO A40D/E’S, A/C, Contronice, 29.5R25 Tires

2011 VOLVO L90F, Cab, A/C, Radio w/CD, Rear Camera w/Color LCD Monitor, Heated Seat, Boom, Suspension, 3rd Function, Hyd Attachment Bracket, Work Lights Front & Rear, Reversible Cooling Fan, Engine Block Heater, Rotating Beacon, Care Track, 104” 3.5cy Bkt, w/BOE, 20.5R25 Bridgestone VJT L-3 Tires ..........................................$177,000 2009 VOLVO L120F, Cab, A/C, Radio w/CD, Work Lights, Boom Suspension, Reversible Cooling Fan, Hyd Attachment Bracket, 4.4 CY Bkt, w/BOE, 23.5R25 Tires ..................$CALL 2006 VOLVO L150E, Cab, A/C, radio w/CD, Work Lights, Boom Susp., Return to Dig, 5.25 CY Bkt w/BOE, 26.5R25 Tires ......$CALL 2005 VOLVO L220E, Cab, A/C, Radio, Additional Work Lights, Return to Dig, Boom Susp, 7 Cu Yd. Bkt w/BOE, 29.5R25 Tires ...... ........................................................$135,000 1996 VOLVO L330C, Cab, A/C, Contronics, Boom Susp, 9 Cu. Yd. Spade Nose Bkt w/Teeth, 35/65R33 ............................$57,500 2001 VOLVO L330D, Cab, A/C, Boom Susp., Comfort Drive Cont, 9.6cy Spade Nose Bkt, w/Teeth, 35/65R33 Tires..................$137,000 1998 KOMATSU WB70, Cab, Heater, Front/Rear Work Lights, Hyd QC, Log Bkt w/Teeth, 15/70-18 Bridgestone Tires, C&P .... ..........................................................$23,000

2008 VOLVO EC160CLC, A/C, 28” Pads, 9’10” Stick, Aux. Hyd, Q/C Piping, Rotator Piping, Pilot Pattern Cont. Changer, Block Heater ...... ........................................................$115,000 2003 VOLVO EC210BLC, A/C, Radio, 32” Pads, 9’6” Stick, Hammer/Shear Piping, Geith Pin Grabber, 48” Bkt ..........................$56,500 2005 VOLVO EC210BLC, A/C, Radio, 32” Pads, 9’6” ARM, Hammer/Shear Piping, QC Piping, Heavy CW, Pilot Pattern Cont. Change, Block and Oil Pan Heater, Geith Pin Grabber, 30” Bkt ..............................................$77,500 2010 VOLVO EC210C LC, A/C, Radio w/CD, 32” Pads, 11’6” Stick, Hammer / Shear Piping, QC Piping, Pilor Pattern Cont. Change, Block Heater, Rear camer w/Color LCD Monitor ............................................$154,000 2009 VOLVO ECR235CL, A/C, Radio w/CD, 32” Pads, 9’6” Stick, Hammer / Shear Piping, Q/C Piping, Pilot Pattern Cont. Change, Block Heater ..................................................$CALL 2004 VOLVO EC240B LC, A/C, Radio, 36” Pads, 9’9” Stick, Hammer / Shear Piping, QC Piping, Pilot Pattern Cont. Change, Block Heater, Wain Roy Twist QC, Rockwell Hyd. Thumb, 72” Ditching Bkt, 42” GP Bkt ............ ..........................................................$95,000 2007 VOLVO EC240BLC, A/C, 36” Pads, 9’9” Stick, Aux. Hyd, Q/C Piping, Rotator Piping, Pilor Pattern Cont. Changer, Block Heater ...... ........................................................$119,000 2007 VOLVO EC290BLC, A/C, 36” Pads, 13’1” Stick, Aux. Hyd, Q/C, Piping, Rotator Piping, Pilot Pattern Cont. Changer, Block Heater ...... ........................................................$137,500

2008 VOLVO EC290CLC, A/C, 36” Pads, 12’2” Stick, Aux. Hyd. Q/C Piping, Rotator Piping, Pilot Pattern Cont. Changer, Block Heater ...... ........................................................$157,000 2003 VOLVO EC360BLC, A/C, Radio, 36” Pads, 60% U/C, 12’13” Stick, Pilot Pattern Cont. Change ..................................$112,000 2005 VOLVO EC360BLC, A/C 36” Pads, 12’10” Stik, Hammer/Shear Piping, Q/C Piping, S-3 Coupler, Pilot Pattern Cont. Change, Block & Oil Pan Heater ......$135,000 2006 VOLVO EC360BLC, 36” Pads, 12’10” Stick, Q/C Piping, Hammer/Shear Piping, Pilot Pattern Cont. Change, Walk Way, Block Heater ..............................................$137,500 2009 VOLVO EC360C LC, A/C, Radio w/CD, 36” Pads, 12’10” Stick, Hammer / Shear Piping, Q/C Piping, Slope / Rotator Piping, Pilot Pattern Cont. Change, Block Heater ........ ............................................................$CALL 2003 VOLVO EC460BLC, A/C, Radio, 36” PADS, 15’9” Stick, Hammer/Shear Piping, Pilot Pattern Cont. Change, HYD CWT Removal................................................$CALL 2003 CATERPILLAR 321C LCR, A/C, Work Lights, 32” Pads, 60% U/C, 9’6” Stick, Hyd Q/C, 30” Bkt ......................................$67,500 2005 CATERPILLAR 345BL, A/C, Radio, Work Lights, 36” Pads, Reach Boom, 12’10” Stick, Hyd Pin Grabber, 54” GP Bkt, Municipal Trade ........................................................$119,000 2006 DEERE 35D, OROPS, Work Lights, 12” Rubber Pads, Offset Boom, Hyd. Thumb, Leveling Blade, Q/C, 16”/24”/36” Bkts$25,000

EXCAVATORS 2009 VOLVO ECR145CL, A/C, Radio w/CD, 24” Pads, 8’2” Stick, Hammer / Shear Piping, Q/C Piping, Pilor Pattern Cont. Changer ........ ............................................................$CALL

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42,500 Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . . . . . . . . . . . . . . . . . . . . . . .$59,000 Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . . . . . . . . . . . . . . . . . . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 $79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . .$89,500 COMPACTORS IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . .$4,000 - $6,500

LANDSCAPING Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . .$13,000 Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,500

CRAWLER LOADERS

MOTOR SCRAPERS Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . .CALL Cat 621E, 1989, Scraper, OROPS, 33.25x29, OFF ROAD HAULERS Komatsu CD60R-1 Crawler Dump Truck, very nice . . . . . . . . . . . . . . . . . . . . . . .CALL 1997, 360° rotation . . . . . . . . . . . .$66,000 (2) Cat 637 scrapers, 1975, 91P series, dual Volvo A40, 1998, 40 tons, 10991 hrs, 395 engine, OROPS, good rubber . .$23,500 Ea. hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work HYDRAULIC EXCAVATORS ready . . . . . . . . . . . . . . . . . . . . . . .$127,500 JD 490E, 1994, 9'11" stick, Aux. hydraulics, Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, quick coupler, 6-7000 hrs, Fleet maintained . 29.5R25, working everyday . . . . .$145,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, Hitachi UH181, 1985, Equipped w/hammer . 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 hitch rebuilt . . . . . . . . . . . . . . . . .$115,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on Volvo A40, 1995, 40 tons, 395 hp, 8WD, rubber, operational . . . . . . .$10,500/OFFER 29.5R25, A/C, P/S trans, tailgate, work ready Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, . . . . . . . . . . . . . . . . . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 10 roller U/C . . . . . . . . . . . . . . . . . $31,500 tires, approx 7,000 hrs, good condition . . . .. Kobelco SK200LC Extra Long Reach, 1993, . . . . . . . . . . . . . . . . . . . . . . . . . . .$147,500 32" TBG pads, 42' reach, nice . . . .$68,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, Komatsu PC200 LC-6, 1996, 32" pads, 42" 26.5x25, A/C, P/S trans, working everyday on Bkt, long stick . . . . . . . . . . . . . . . . .$39,500 jobsites . . . . . . . . . . . . . . . . . . . . . .$87,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" Volvo A35, 1995, 35 tons, 326 hp, 6WD, stick, 44" Bkt . . . . . . . . . . . . . . . . . .$43,500 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . .$89,000 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 bkt, 27.6" TBG pads, work ready . .$57,000 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, (5) Komatsu PC128UU, 1996, offset boom, works everyday . . . . . . . . . . . . . . .$122,500 rubber tracks, low hrs . . . . . . . . . . . . .CALL Komatsu PC750 LC-6, 1999, 454 hp, 27” CRAWLER TRACTORS boom, 11’10” stick, 44’ DGB, aux plumbing, Cat D6H, 1987, Semi U blade w/tilt, ROPS, bucket choice, 24k ctwt . . . . . . . .$255,000 fair U/C . . . . . . . . . . . . . . . . . . . . . .$74,000 Komatsu PC400 LC-6LK, 1999, 10’6” stick, (2) Cat D6TXW, 2008, ROPS w/sweeps, aJRB coupler, 31.5” TBG, ctwt removal, choice blade, winches, v. good . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade .. of bkt . . . . . . . . . . . . . . . . . . . . . . .$77,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85,000 Komatsu PC400 LC-6LK, 11’1” stick, 35.5” (2) JD 450G, 1996, wide tracks, ROPS, PAT TBG, ctwt removal, choice of bkts, working blade . . . . . . . . . . . . . . . . . . . .$39,000 Ea. everyday . . . . . . . . . . . . . . . . . . . . .$97,500 Komatsu PC160 LC-7KA, 2004, 24” TBG CRANES pads, JRB coupler, plumbed, 8’6” width, nice, Broderson IC80-1B, 1984, 8.5 ton, Perkins work ready . . . . . . . . . . . . . . . . . . . . . .CALL dsl, OROPS, 20’ boom,, 3500hrs, good . . . .. Volvo EC460B LC, 2003, 4600 hrs, 23’ . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, hammer/shear plumbing very good condition dual fuel, 10.00R15 tires, 3,400 hrs$21,500 Grove RT58C, 1981, down cab, 18 ton r.t., . . . . . . . . . . . . . . . . . . . . . . . . . . .$159,000 70' boom anti-two block, GM dsl, clean . . .. TRUCKS & TRAILERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500 Drott 3330B Carry Deck, 7.5 ton capacity, (2) 48' Box Vans w/Liftgates, Good dsl, 4 section boom 8' jib . . . . . . . .$14,500 Condition . . . . . . . . . . . . . . . . . . . . . . .CALL Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . .$46,000

AIR COMPRESSORS IR 185’s, JD diesels . . . . . . . . . . . . . .CALL SPECIALS Vermeer 5800 Trencher, 1997, 4 cyl dsl eng . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11,900 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . . . . . . . . . . . . . . . . . .From $5,200 IAmerican Augers 16" Boring Machine, 10 HP gas, 35,000# thrust, 30' track . .$7,500 BACKHOES Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . .$24,500 Volvo BL60, 2006, 4x4, EROPS, ext hoe, aux hyd . . . . . . . . . . . . . . . . . . . . . . . . .$32,500 CRUSHING & CONVEYING Read RD90B screening plant, 1994, Lister diesel, dual tires on axle, hyd extensions, good condition, work ready . . . . . .$32,500 Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. side & rear conveyors, T/A carrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Duraquip dust collection . . .$150,000 MISCELLANEOUS (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Ea.

ATTACHMENTS BUCKETS PC1000, 84" Digging Bucket . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . .$4,000 (5) Cat 936/926/950 pallet forks, for a Balderson quick coupler, exc. cond . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$3,500 Ea. Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.


Page 10 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Customers, Vendors Meet at Scharber & Sons Open House

S

charber & Sons held its annual open house Jan. 25. The event was a chance for customers and vendors to meet and talk about the equipment the company has to offer. As in the past with the company’s open house, Scharber & Sons invited members of the Minnesota State Patrol to make a safety presentation on commercial truck regulations.

Scharber & Sons Govt. Sales Manager John Braunshausen stands in front of a John Deere 5083EN that was sold to the city of Mankato.

Scharber & Sons Sales Representative Randy Thorstad takes time out from the busy open house to pose for a photo in front of this Belos Trans Giant with a diamond mower.

Felling Sales Consultant Nathan Uphus (R) is ready to answer any questions Dan Dehmar of Dehmar Landscaping, St. Michael, Minn., might have about the great equipment he’s seen during the open house.

(L-R): Dale Shequen of Ariens Company, Mike Bell of Suburban Lawn Center and Gravely Product Representative Martin Raecker spend some time discussing the Gravely Pro-Stance 48 in. mower system.

Charlie Miller (L) of Truck Utilities, St. Paul, Minn., and Scott Schultz of the city of Maplewood take a good look at the Kage 9 ft. snow system.

(L-R): Anthony Schmaus of Otsego, Minn., Don Schmaus of the city of St. Louis Park and Scharber & Sons’ Parts Specialist Phil Scharber take a look at this John Deere 825i Gator with Quad Track system.

(L-R): Sgt. Joseph Heyman, CVI Officer Roger Istvanovich and 34-year Scharber & Sons customer Dale Strand of Viking Sewer & Drain are all smiles after participating in the safety seminar.

Craig Pomplun of the city of Ham Lake, Minn., stands in front of a John Deere 319D track machine.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 11

View us at: www.amstate.com

PAVERS / ROAD WIDENERS CEDAR RAPIDS CR362L - ‘08 • Electric 8-16’ screed, Top Con Syst V, approx 1563 hrs............................................................................$177,500 CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 940 hrs..........................................................................................$299,500 CEDAR RAPIDS CR662RM - ‘11 • Mat. Transfer Vehicle w/Hopper Insert, 427 Hrs ........................................................................................$435,900 MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 277 Hrs........$95,000 MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 45 Hrs........$105,500 MIDLAND SPD-8 - ‘11 • RH & LH Discharge Widener to 8’, 340 Hrs............ ......................................................................................................$145,000 CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES ROTEC RX400 - ‘11 • 48” Cut, 4 Track, Front Loading, Mill w/470 Hrs ........ ......................................................................................................$349,500 TEREX PR165 - ‘09 • 4 wheel, front loading, w/24” cutter, 511 hrs ............ ......................................................................................................$159,900 WIRTGEN W50 - ‘11 • 20” Cut, 3 Wheel, Rear Discharge Mill w/150 Hrs .... ......................................................................................................$164,700

ROLLERS SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 217 hrs ............$10,800 SAKAI GW750 - ‘11 • Vibratory Pneumatic, 79’ Wide, 320 Hrs ....$112,500 SAKAI R2H-2 - ‘10 • 3 Wheel Static Roller, 83” Wide Coverage, 350PLI, 450 Hrs ..........................................................................................$85,000 SAKAI SW300-1 - ‘09 • 39.2" Dbl Drum vib, “on rent”, 250 hrs......$22,500 SAKAI SW320 - '07 • 47" Dbl Drm Vib w/foldable ROPS, 525 hrs ..$16,950 SAKAI SW800II - '09 • 67" Dbl Drm Vib, 1115 hrs..........................$61,500 SAKAI SW800II - ‘11 • 67” Dbl Drm Vib, w/remaining standard and EPTW, 96 hrs..............................................................................................$95,000 SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and EPTW, 500 hrs ................................................................................$87,500

Contact Marty in Illinois 1-800-307-0221 mahrendt@amstate.com

Photos & Detail Descriptions view: www.finkbinerequipment.com

MANITOWOC 777 CRAWLER CRANE

KOBELCO CK800 CRAWLER CRANE

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT PIONEER CS2148 PORTABLE JAW PLANT, 1997, 21x48 jaw, 50" x 20' vibratory feeder, 48" front discharge conveyor, Cummins diesel, quad axle chassis with hydraulic leveling......................................................................CALL PIONEER 6'X20' 10 DEGREE 3 DECK SCREEN PLANT, 1990, side discharge conveyor, underscreen conveyor, feed conveyor, tandem axle chassis ........................CALL JCI 1400 LS PORTABLE CONE PLANT, 1997, 300 hp electric motor, 48" side discharge conveyor, 42' feed conveyor, motor control panel, tri-axle chassis with hydraulic leveling......................................................................CALL EXCAVATORS DEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8” Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight, 5800 Frame Hours and Recent Engine Rebuild ............................................$125,000 LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel, 33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adn Removable Sideframes, Approx. 190,000 Lb. Working Weight..................................................CALL LIEBHERR R954C HD “LITRONIC” CRAWLER EXCAVATOR, (Several 2006-2007 Models Available) with Various Boom/Stick Combinations and Buckets Available, 326HP Liebherr D936L Six-Cyl. Tier 3 Diesels, Hydraulically Removable Counterweights, 124,000 to 130,000 Lb. Working Weights..........CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

CRANES KOBELCO CK800 80 TON CAPACITY CRAWLER CRANE, 1996, with 140’ Main Boom, 30’ Jib, Two Main Hoist Drums Plus an Auxiliary Third Drum, Hydraulically Extended Undercarriage with 36” Track Pads ..................................................................CALL GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................................................$179,900 GROVE RT875E 75 TON ROUGH TERRAIN CRANE, 2006, 41’ to 128’ boom, 33’ to 56’ bi-fold swingaway, Model 30 main & auxiliary hoists, 29.5 x 25 tires, 3position outriggers ............................................CALL MANITOWOC 777 SII 200 TON CRAWLER CRANE, 2000, Cummins, 220' main boom, 40' fixed jib, third drum, 7200 hours ..............................................CALL MANITOWOC 11000 100 TON CAPACITY CRAWLER CRANE, 2008, (100 Ton capacity @ a 14' radius), with a 332 hp Hino 6 cylinder Tier III diesel, 200' main boom, 60' jib, LMI, 36” crawler shoes, approximate working weight of 218,000 lbs. with 74,970 lb. 5piece counterweight, counterweight and side-frame removal systems. 3020 hours ............................CALL

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113


Page 12 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Difference is in the D-tails.

• EFI Engine with Auto Idle

Engine Power 47.1 kW (63 hp) @ 2,300 rpm

• Sealed and Pressurized Cab

Bucket Breakout Force 2327 kg (5,125 lb.) Tipping Load 1816 kg (4,000 lb.)

• Switchable Joystick Controls • Cushioned Boom Cylinders

SAE Rated Operating Cap. 908 kg (2,000 lb.)

**0.0% Financing for 42 Months. ** Offer ends 03/31/12. Subject to approved credit on John Deere Financial Installment Plan, for commercial use only. Prior purchases are not eligible. Available at participating dealers. Some restrictions apply. See your dealer for complete details and other financing options.

RDO Equipment Co. www.rdoequipment.com Burnsville, MN 952-890-8880 Matt Dull mdull@rdoequipment.com

Mankato 507-387-1836

Rochester 507-282-8888

Marshall 507-532-0994

Sauk Rapids 320-259-6222

Moorhead 701-526-2200


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 13

w w w. m b a m e r i c a . c o m MB America Inc. - 855-MB-CRUSH (622-7874) - info@mbcrusher.com


Page 14 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt 3200 All Terrain Crane 1:50 Scale $195

Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale............$75 Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200 Allis-Chalmers 45 Motor Grader, 1:50 Scale ..............$100 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$70 Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70 Bantam Shovel Mounted on a White Truck, 1:50 Scale$95 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader..............................................................................$45 Bobcat S175 Skid Steer Loader, 1:50 Scale ................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale ................................................................$65 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$50 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$35 Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$90 Case Conrad 580 Super R Backhoe, 1:50 Scale ........$175 Case CX210B Excavator, 1:50 Scale ............................$35 Case 330B Articulated Truck, 1:50 Scale......................$35 Case 621E Wheel Loader, 1:50 Scale............................$35 Case 1850K Dozer, 1:50 Scale ......................................$40 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$65 Caterpillar AP655D Paver, 1:50 Scale ..........................$65 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ..........................................................................................$50 Caterpillar D6T XW Track-Type Tractor ........................$70 Caterpillar D8R Track Type Tractor, 1:50 Scale............$55 Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$85 Caterpillar 247B Multi-Terrain Loader, 1:32 Scale........$35 Caterpillar 416 Backhoe/Loader, 1:50 Scale ................$75

Poclain 350CK Excavator 1:50 Scale, Conrad $165

JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$85

All New in Box

John Deere 200D LC Excavator ....................................$45 John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 624K Military Wheel Loader, 1:50 Scale ..$35 John Deere 772CH Motor Grader, 1:50 Scale ..............$35

CALL Toll Free

John Deere 850J Crawler Dozer, 1:50 Scale ................$40

800-523-2200

Komatsu D51 EX Dozer, 1:50 Scale ..............................$65 Komatsu D51 PX Dozer, 1:50 Scale ..............................$65

Ext. 197

Komatsu D375 Dozer, 1:50 Scale ..................................$90 Komatsu GD655 Motor Grader, 1:50 Scale ..................$85

Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .... ..........................................................................................$70 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $40 Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$75 Caterpillar 785D Mining Truck, 1:50 Scale..................$145 Caterpillar 906H Compact Loader, 1:50 Scale..............$40 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $45 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$65 Caterpillar 963D Track Loader, 1:50 Scale....................$60 Caterpillar 966A Wheel Loader, 1:50 Scale ..................$65 Caterpillar 977 Traxcavator, 1:50 Scale ........................$60 Caterpillar 980G Wheel Loader, 1:50 Scale ..................$50 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$80 Dynapac CC232 Vibratory Compactor, 1:35 Scale ......$55 Gradall XL4300II Excavator, 1:32 Scale ........................$80 Grove GMK 4115L Truck Crane, 1:50 Scale................$250 Hamm 3307 Compact Roller, 1:34 Scale ......................$60 Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$30 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$65 International TD-24 Military Dozer, 1:50 Scale ............$50 International 350 Payhauler, 1:25 Scale......................$285

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$85 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ................................................................................$85 Komatsu PC14R Mini-Excavator, 1:32 Scale ................$50 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$235 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$45 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$45 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$65 Komatsu WA470 Wheel Loader, 1:50 Scale..................$75 LBX 210 X2 Excavator, 1:40 Scale ................................$75 Link-Belt 80100 Rough Terrain Crane, 1:50 Scale ....$175 LeTourneau Super C Scraper w/Cab, 1:50 Scale ........$80 LeTourneau Military Super C Scraper, 1:50 Scale ......$50 Northwest 25-D Backhoe, 1:50 Scale ............................$85 Northwest 25-D Shovel, 1:50 Scale ..............................$70 Terex PPM AC40/2L ATC, 1:50 Scale ..........................$190 Terex RT130 RTC, 1:50 Scale ......................................$160 Vogele Super 700 Small Paver, 1:50 Scale ..................$75 Volvo A25D Articulated Truck, 1:50 Scale ....................$75 Volvo BL71 Backhoe Loader, 1:50 Scale ......................$50 Volvo L90E Wheel Loader, 1:50 Scale ..........................$75 Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ..........$85

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 15

USED EQUIPMENT 1974 CMI SUBURBAN 56-120

2006 CAT 345CL WVG

2008 CAT M322D

2007 CAT 924G

Slipform paver, 12’-24’, CAT 3306 Engine, Float Pan, Hyd. Vibrators, Auto Float.......... ............................................................$34,000

S/N ESD00199, 4010 hours, Reach Boom, 12’10” Stick, Counterweight Removal Device ..........................................$212,000

S/N W2S00283, 1765 hours, A/C, VA Boom, 9’6” Stick, Aux Hyd, 11:00-20 Dual tires ..............................................$197,000

s/n RTA00851, cab, a/c, 2.3yd bucket, Tier ll engine ........................................$115,000

2007 CAT 315CL

2002 CAT 420D IT

2007 CAT 320CL

2004 JOHN DEERE 310SG

S/N CJC05317, 1900 hours, 10’2” stick, coupler, hammer circuit, a/c ......$115,000

S/N BLN04553, 7300 hours, CAB, A/C, E-Stick, AWD, Ride Control ..........$34,750

S/N PAB07035, 2300 Hrs, quick coupler, mechanical thumb, 42” bucket ..$122,500

486 Actual Hours, Open ROPS, 4 Wheel Drive, Standard Stick ....................$53,500

1998 CAT 973

2006 CAT 246B

2008 CAT 908H

1996 GOMACO GT3600

3000 Hrs, Cab w/Heater, Waste Disposal Package, 90% U/C ........................$106,000

S/N PAT03624, 633 hours, OROPS, Hyd Coupler, Aux Hyd, 70% Tires ........$25,000

s/n MXF00268, 626 hours, cab, a/c, 1.4yd gp bucket, forks ............................$83,000

1515 hours, Molds available ........$60,000

1991 CAT 963

1975 JOHN DEERE 570A

2009 Volvo L35B

2010 MORBARK 4600XL

12,500 Hrs, Cab w/Heater, Bushing Wear 50%, Runs and Operates Well ......$39,000

Cab w/Heater, Front Scarifier, Front Tires are New, Rear 75%, Very Clean ....$23,500

4250 hours, A/C, Tires 50%, Good Operating Condition ......................$44,000

400 Hrs, Cat C27 Engine, Auto Reversing Fan, Magnetic End Pully..............$575,000

Rod Byers 636-680-1579 rod.byers@fabickcat.com

1 Fabick Drive, Fenton, MO 63026 www.fabickcat.com “To Ever Serve Our Customers Better”

Bob Miller 636-680-1594 bob.miller@fabickcat.com


Page 16 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

World of Concrete 2012 Sees Increased Attendance

W

orld of Concrete 2012 recently completed another successful show at the Las Vegas Convention Center Jan. 24 to 27. The well-known industry show launched a wide array of new products, equipment and events; presented more than 100 seminars in the Education and Certification Program; and provided valuable networking opportunities for exhibitors and attendees. World of Concrete 2012, the only annual international commercial construction trade show for the concrete and masonry industries, attracted 52,088 total professional registrants and showcased just more than 1,200 indoor/outdoor exhibitors in more than 552,500 net square feet of exhibit space, an increase of 40,000 net square feet over the 2011 show. “There was a very positive and optimistic buzz on the show floor. WOC 2012 has been a huge success, and based on the feedback we have received from both exhibitors and attendees, we have no doubt the economy is recovering and the commercial construction industry is well on its way to a great 2012!” said Show Director Jackie James. Many exhibitors at WOC 2012 reported positive results and a desire to return to the show in 2013. “Our first year at World of Concrete was beyond anything we imagined,” said exhibitor Stuart Johnson, president of Phoenix Curb Machines. “We left the show with sales, distributors, solid leads, multiple media interviews, and valuable connections.” World of Concrete participated in the 2012 International Buyer Program for the 7th consecutive year. World of Concrete Management and the U.S. Commercial Service cooperated in the global promotion of the show to bring international buyers and U.S. exhibitors together to expand business both domestically and overseas. Delegations from all over the globe attended World of Concrete to connect with U.S. exhibitors interested in exporting goods and services in the International Business Center. Concrete professionals had a choice of several events to

(L-R): Peter Causer of Volvo discusses the Volvo BL70B loader/backhoe with Ian Ward and Roy Armstrong of JDM Construction, West Point, Iowa.

John Legler (L) and Paul Zimakas of Astec show that when a concrete plant is way too big to haul, making a detailed model of one is the next best thing.

see CONCRETE page 62

(L-R): Blaine Archibald and Curt Frahm of Genesis discuss the GDR 200 demolition recycler with Pascal Centomo from France.

Jerry Jelen of Paladin was happy to discuss his company’s product line with Jennifer “Marilyn” Lier.

Miriano “Max” Ravazzolo (L), CEO of MB America Inc., pauses for a photo with Herman Ludwig, Ludwig Construction Inc., Keaau, Hawaii, and the BF 90.30 bucket crusher.

(L-R): Matt Eslich and Allyson Kolbl of Eslich Wrecking, Canton, Ohio, have been listening to Dan Hoffman talk about the Allied-Gator Inc. products.

(L-R): Jon Bammann of SANY discusses the S196-9 402 concrete pump truck with John Magee of CPI Construction Equipment LLC in Kansas City, Kan.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 17

LIKE NEW LOADERS AT LESS THAN HALF THE PRICE!!! $78,000 JD 644E tool carrier tractors, Complete factory remanufacture in 2001, Marine Corps contract. Everything was gone through (engines, axles, transmissions, pivots, etc) at that time and the units have very low hours since the remanufacture process. Erb is putting on new paint, new air conditioning units, new 4 yd buckets. Units vary in hours and pricing. Pricing for a unit with less than 2500 hrs, with new paint, air conditioning, hydraulic quick coupler, new bucket and good rubber. $78,000

Fiat 65E, 110HP, Blade Bomag BW205, 84" Pitch, 252 Hrs, #A7104 Drum, #A5331 .............. ........................$110,000 ........................$32,000

JD 310SG, #N4288, Bomag BW180AD, 71" JD 690E, 50’ Long Reach, 32” Pads .......... Cab, Air, Aux Hyd .......... Drum, #A4597 .............. ........................$50,000 ........................$52,000 ........................$38,000

JD 800CLC, 14' 5" Arm, JD 600CLC, 13' 5" Arm, 36" Pads, #N4385 ........ 36" Pads, #U10798 ...... ......................$450,000 ......................$185,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 80C w/ Genesis JD 1050C, Waste GVP7, #N4456 .............. Package, 165" Blade, ......................$100,000 #N4010 ..........$195,000

ERB EQUIPMENT CO., INC. Sales, Rental, Parts & Services Of: John Deere, Bomag, NPK & Trail King

Call Industrial Sales At (636) 349-0200 Toll Free (866) 372-7368 Email: Mattheisel@erbequipment.com

VIEW COMPLETE INVENTORY (OVER 300 UNITS)

8 Locations To Serve You Fenton, MO Wentzville, MO

Mt. Vernon, IL Cape Girardeau, MO

Paducah, KY Cuba, MO

Owensboro, KY Evansville, IN


Page 18 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SLIDE RAIL SYSTEMS By Efficiency Production, Inc.

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

America’s PREMIER Slide Rail System ZZZ(I¿FLHQF\6OLGH5DLOFRP&(*

• No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industy acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

563-872-4112

'8%848( %(//(98(,2:$

:::--6&+(&.(/&20

CUSTOM REBUILD DIVISION TOP QUALITY, non-union, independent EMPLOYEES that care deeply for our customers, working in a TOP QUALITY FACILITY in Iowa, equals TOP QUALITY EFFICIENCY! ‡&203/(7(0$&+,1( Custom Rebuilds, Remans & Repowers ‡,1',9,'8$/&20321(17 Rebuilds & Repairs ‡2(035,9$7(/$%(/ Contract Remanufacturing, Rebuilding & Mechanical Service

Please contact Josh Scheckel for any of your service requirements, call 563-872-4112, or email JOSH@JJSCHECKEL.COM

CAT D10R REMAN

CAT D10R REMAN

(2) CAT D9R REMANS

(48,30(175(17$/$1'6$/(6',9,6,21 1996 CAT D5H LGP Here is a nice one!........... SOLD!! 75$&.7<3(75$&7256 97/2012 CAT D11R Complete Reman.............. CALL!! 2005 DEERE 650J LGP Only 4,900 hrs......... $51,000 97/2012 CAT D10R Complete Reman............ CALL!! &203$&7,21 ',5735(3 97/2012 CAT D9R Complete Reman................ CALL!! (9) 48” & 60” SHEEPSFOOT........... $4,500-$18,500 2002 CAT D11R Coming In! .............................CALL!! (2) 2009 HOLMES ROLLERBLADES.......$19,000 EA 1999 CAT D10R Full Specs, New UC............$468,000 (3) ROME OFFSET DISKS............. $12,500-$19,000 1996 CAT D10R Coming In! .............................CALL!! 27+(5(48,30(17 2006 CAT D9T Full Specs, New UC.............. $445,000 2002 CAT D9R Full Specs, New UC..............$255,000 1981 GROVE RT 740 CRANE ...................... $88,000 2001 CAT D9R Full Specs, New UC..............$235,000 2007 CAT 320DL Low Hours!..................... $139,000 1999 CAT D9R 100% UC, Full Specs............$265,000 2006 CAT TH580B TELEHANDLER..............$56,000 1990 CAT D9N Low hrs on Power Train............ SOLD!! 2006 CAT TH460B TELEHANDLER..............$45,000 2004 CAT D6N XL Just In! ............................ $88,000 1998 JD 7810 MFWD TRACTOR................. $66,000 1998 CAT D6R LGP Full Specs.................... $105,000 (2) 2005 NOBLE 417B SCRAPERS.........$35,000 EA 1997 CAT D6R XW Priced to Sell!.................... SOLD!! (4) 2007 MISKIN DW25’S..................... $75,000 EA CALL!! 1995 CAT D6H XL Just In! ............................ $65,000 ATTACHMENTS, RIPPERS, BLADES...............CALL!! For equipment rental and sales call 563-872-4112, or email SALES@JJSCHECKEL.COM

CAT D11R REMAN Transport and Financing available. Detailed pictures/descriptions at :::--6&+(&.(/&20

1999 CAT D9R, FULL SPECS 100% NEW UC! $265,000


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 19

815-968-0818

CONTACT Evenings: Bill 815-262-9134 or Fred 815-975-1419

CAT 312CL 0.98 YARD HYDRAULIC EXCAVATOR, 90 HP, Cab w/Heat & AC, 9’10” Stick, 36” Bkt w/Teeth, Single Shank Fixed Thumb, Good U/C w/28” Pads ..................................$56,500

CAT 320CL 1.83-YARD HYDRAULIC EXCAVA- CAT 815B 4 WHEEL DRIVE ARTICULATED COMTOR, 128 HP, Cab/Heat & AC, Aux Hyds, 9'6" PACTOR, 170 HP, Cab, Powershift, Leveling Stick, 44" Bkt w/ Teeth, New Rails & Sprockets, Blade w/Tilt, Very Good Feet ..............$65,500 Very Good UC w/ 31.5" Pads ............$115,000

CAT 939 1 ½-YARD CRAWLER LOADER, 90 HP, Canopy, 3F - 3R Powershift, Pedal Steer, GP Bucket w/ Teeth, Very Good Undercarriage w/ 18" Pads ........................................$28,500

CAT 322CL LR HYDRAULIC LONG REACH EXCAVATOR, 168 HP, Cab w/Heat & AC, 60’ Long Reach Boom w/45” Bkt, Very Good U/C w/32” Pads........................................$135,000

CAT D6H SERIES II HYDRAULIC SU DOZER W/TILT, 175 HP, Canopy, Powershift, CAT 613B 11-YARD ELEVATING MOTOR Differential Steer, VG UC w/New S&L Rails, Top SCRAPER, 150 HP, Canopy, Powershift, Good & Bottom Rollers, and Segments, Very Good Chains and Flights, Good Tires, 2 in Stock ...... 24” Pads ............................................$14,500 ....................................................$19,500 Ea.

CAT D8R HYDRAULIC SU DOZER W/TILT, 305 HP, Cab/Heat & AC, Powershift Transmission, Differential Steering, Drawbar, Very Good Undercarriage w/26" Pads ................$132,000

CAT D5G XL HYDRAULIC 6-WAY DOZER, 90 LINDIG LR-100 TOP SOIL SHREDDER, 8’ HP, Canopy, Heater, Hydrostatic Drive, Joystick Hopper, 27.5” Wide Hammer Mill w/Upper Disc Controls, Good U/C w/20” Pads..........$39,500 Rotary Shaft, 24” Feed & Discharge Conveyors, Rotary Trommel Screener Basket........$22,500

CATERPILLAR 953C LGP 2 1/4 YARD CRAWLER LOADER, 121 HP, Cab w/AC, GP Bucket w/Teeth, Pilot Hyds, New UC w/ S&L Rails, Idlers, Rollers, & 20" Pads ..................$53,500

CAT 267B CRAWLER SKID STEER LOADER, 71 HP, Canopy, Hydrostatic Drive, Auxiliary Hydraulics, Manual Disconnect, GP Bucket, New 18” Rubber Tracks ......................$25,500

CAT D6M XL HYDRAULIC 6-WAY DOZER, 140 HP, Canopy, Fingertip Control Powershift and Steering, Good Undercarriage w/ 24" Pads ...... ............................................................$54,500

BOMAG BW135AD TANDEM ARTICULATED VIBRATORY ROLLER, 46.4 HP, Hyd. Drive, 51.2” Drums, 60.8 Gallon Water Capacity, 8130 Maximum Centrifugal Force ................$12,500

2007 DIERZEN DOMINATOR 22’ TANDEM AXLE QUARTER FRAME END DUMP TRAILER, Air Tail Gate, Electric Tarp, Good 11Rx22.5 Tires on Dayton Wheels ......................$24,500

CASE 580 SUPER L 4x4 1-YARD LOADER BACKHOE, 80 HP, Cab/Heat, 4F-4R Shuttle Trans., Extendahoe, Case Control, 18" Bkt w/Teeth, NEW Tires ............................$28,500

For our full inventory, please visit www.adamsequipment.com


Page 20 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Congress Allocates $7.5M for Repairs to Quake-Damaged D.C. Monument MONUMENT from page 1

essary. Bob Vogel, superintendent of the National Mall, said the park service is working to get the monument reopened as quickly as possible. Such an undertaking has never been done before, so the exact time line is uncertain. “This is a complex job,” Vogel said. “This is a one-of-akind structure that poses challenges for repair that other buildings don’t.” Rubenstein, a co-founder of the large private equity firm The Carlyle Group, has quickly become Washington’s foremost philanthropist. He is among the nation’s wealthiest people, joining Bill Gates and Warren Buffett in pledging to give away at least half their wealth to charity. In the past five years, Rubenstein has spent more than $83 million to support the capital city’s cultural scene through cash donations or pledges and purchases of historic documents, including copies of the Magna Carta and Emancipation Proclamation, to be shown in national institutions. Just last month, he gave $4.5 million to save the National Zoo’s giant panda program. The Washington Monument caught his attention as soon as he learned how severely it was damaged. Chunks of stone were shaken loose and fell to the ground, and deep cracks formed at the top. Rubenstein said he wanted to help make certain the monument can be reopened as quickly as possible. “Really, this is something that was built by the American people because of their admiration and love of George Washington,” he said, noting $1 donations were collected to build the structure for a little more than $1 million. With his own many donations in Washington, Rubenstein said, “I kind of want to repay a debt I have to the country.” Park Service Director Jonathan Jarvis said the monument will reopen sooner, thanks to Rubenstein. The Park Service was not given enough money this year to fund the complete restoration on its own, he said. “I would suggest it hadn’t even stopped shaking before David Rubenstein came to me and asked if he could help,” Jarvis said. Congress allocated $7.5 million in December on the condition that private donations match that amount. The combined $15 million in public and private funds is expected to cover the cost of repairing damage directly caused by the quake. Repairing water damage from when rain leaked through will cost more, as would a seismic study or reinforcements to strengthen the structure against future earthquakes. The August quake was centered some 40 mi. (65 km) west of Richmond, Va., and was felt from Canada to Georgia. It damaged the Washington National Cathedral, where pieces of mortar rained down from its vaulted ceiling. At the Washington Monument, panicked visitors fled down flights of stairs, but there were no deaths or serious injuries in the region. Daylight could later be seen through some of the cracks, the largest of which was reported to be at least 4 ft. long and about an inch wide. Last fall, daring engineers rappelled from the top to conduct a visual inspection of the exterior. They documented the

damage but noted the monument is structurally sound. Their report in December recommended extensive repairs and reinforcements to preserve the structure. It said some marble panels were cracked all the way through near the top portion of the monument. Rubenstein’s gift will be delivered to the nonprofit Trust for the National Mall, which aims to raise $350 million privately to restore the grounds and facilities at the heart of the nation’s capital. Many areas have become run down from over-use and inadequate funding for maintenance. Caroline Cunningham, president of the group, said Rubenstein’s gift “demonstrates how much people care about this space.”

GO WITH KOMATSU... AND GET THE ONLY TIER 4 INTERIM EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN. Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:

T

• Lower your cost of ownership M • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

s

MIDWEST KOMATSU DISTRIBUTORS

Berry Tractor & Equipment

“Really, this is something that was built by the American people because of their admiration and love of George Washington. I kind of want to repay a debt I have to the country.” David Rubenstein The Carlyle Group

A design competition is under way to develop ways to improve the mall, including the Washington Monument grounds. Finalists will be chosen in May, and the group will seek funding for each project. Construction on the monument began in 1848, but funds ran out during the Civil War two decades later, leaving just an embarrassing stump for years. It was finally completed in 1884 and was the world’s tallest manmade structure until it was eclipsed by the Eiffel Tower. It remains the tallest structure in Washington. Rubenstein recently toured the monument and saw its damage inside. Plaques from various states and groups line the walls, paying tribute to the nation’s first president. “Because of what he did, we have a terrific republic, and I think Americans and people all over the world want to come here and see this monument,” he said. Rubenstein, a Maryland native and the son of a postal worker, has made major gifts in recent years to the Smithsonian Institution, the National Archives, the Library of Congress and the Kennedy Center, where he serves as chairman. “I come from very modest circumstances, and I’m very fortunate to have achieved wealth beyond what I ever expected,” he said. “I don’t think that I want to be buried with my wealth. ... I’d like to have the pleasure of giving it away to things I think are good while I’m alive.”

www.berrytractor.com KS Garden City 800-475-2290 Kansas City 913-829-4600 Topeka 800-864-4509 Wichita 800-283-4246 MO Springfield 800-864-7995

H

W

8

8

8 I

W

P

Brandeis Machinery & Supply Company www.brandeismachinery.com IN Evansville 812-425-4491 Ft. Wayne 260-489-4551 Indianapolis 317-872-8410 KY Corbin 606-528-3700 Lexington 859-259-3456 Louisville 502-491-4000 Paducah 270-444-8390 Stanville 606-478-9201

M

B 8

O

A 8 F

Columbus Equipment www.columbusequipment.com OH Cadiz 740-942-8871 Canton 330-453-4521 Cincinnati 513-771-3922 Columbus 614-443-6541 Dayton 937-879-3154 Painesville 440-352-0452 Perrysburg 419-872-7101 Piketon 740-289-3757 Richfield 330-659-6681

Continental Equipment Corp. www.aisequip.com MI Grand Rapids 616-538-2400 Lansing 517-321-8000 New Hudson 248-437-8121 Northeast Detroit - Lenox 586-727-7502 Saginaw - Bridgeport 989-777-0090 Traverse City - Williamsburg 231-267-5060

2

8


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 21

Diesel Machinery, Inc. www.dieselmachinery.com SD Aberdeen 605-725-4364 • 888-762-6312 Rapid City 605-348-7438 • 800-658-3047 Sioux Falls 605-336-0411 • 800-456-4005

General Equipment & Supplies www.genequip.com ND Bismark 800-279-4437 Fargo 800-437-2924 Minot 800-825-0479

D65-17 From Komatsu – The Dozer Experts

Road Builders Machinery & Supply Co., Inc. www.roadbuildersmachinery.com KS Kansas City 913-371-3822 NE Grand Island 308-384-2620 Lincoln 402-325-0447 Omaha 402-331-9200

Road Machinery & Supplies Company www.rmsequipment.com IA Cedar Rapids 319-363-9655 • 800-616-6615 Des Moines 218-741-9011 • 800-555-1455 Sioux City 712-252-0538 • 800-633-9104 IL Milan 309-787-1742 • 800-633-9114 MN Duluth 218-727-8671 • 800-888-9535 Savage 952-895-9595 • 800-888-9515 Virginia 218-741-9011 • 800-752-4304

Roland Machinery Co. www.rolandmachinery.com IL Bolingbrook 630-739-7474 Carterville 618-985-3399 Marengo 815-923-4966 Springfield 217-789-7711 IN Portage 219-764-8080 MI Escanaba 906-786-6920 MO Bridgeton 314-291-1330 Cape Girardeau 573-334-5252 Columbia 573-814-0083 Palmyra 573-769-2056 WI DeForest 608-842-4151 DePere 920-532-0165 Eau Claire 715-874-5400 Franksville 262-835-2710 Schofield 715-355-9898

www.komatsuamerica.com/komatsu-care

Komatsu has once again made a great machine even better. The new D65-17 increases productivity and operator comfort while lowering operating costs. All designed to improve your bottom line. t Efficient Komatsu Tier 4 Interim engine and automatic shift transmission with lockup torque converter maximize productivity while saving fuel. t PLUS (long life) undercarriage is standard, further reducing our already low operating costs. t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www.komatsuamerica.com www .komatsuamerica.com


Page 22 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 23

Kings of Hauling. Let’s work. Operators know the reputation of Volvo articulated haulers. Heavy-duty frames and bodies built for long life, whatever the conditions. The F-Series features low emission engines and Automatic Traction Control as standard, reducing fuel consumption, tire wear and operator fatigue. Powerful hydraulics raise loaded bodies, even on steep downhill gradients, while strong brakes always keep things in check. Volvo’s F-Series hauler: power when the going gets tough.

www.nussgrp.com

BURNSVILLE, MN (800) 552-1189

DULUTH, MN (800) 835-6225

MANKATO, MN (800) 862-6225

ROCHESTER, MN (800) 562-1505

ROSEVILLE, MN (800) 704-0935

ST. CLOUD, MN (888) 310-6225

TOOLS THAT MAKE YOUR BUSINESS WORK™

Volvo Construction Equipment


Page 24 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Caterpillar Forms Alliance With Exodus Machines Caterpillar recently executed an alliance agreement with Exodus Machines Incorporated for the design and supply of material handlers to be sold and supported exclusively by Cat dealers. These Exodus machines will be available immediately in North America and will complement Caterpillar’s current line of wheel and track material handlers greater than 27.5 tons (25 t). These products will initially continue to carry the Exodus brand name but will transition to the Cat brand in 2013. The alliance agreement follows Caterpillar’s recent formation of a new strategic business unit, the Caterpillar Industrial & Waste Group, which has global responsibility for serving customers in these markets. The new group is part of the diversified products division, led by Bill Springer, vice president of Caterpillar. “We are pleased to be working with Exodus to meet customers’ material handler needs,” Springer said. “Bringing together Exodus’ intense focus on material handlers and their innovative designs with our unmatched distribution and Caterpillar recently executed an alliance agreement with Exodus Machines Incorporated product support capabilities, the alliance for the design and supply of material handlers to be sold and supported exclusively by Cat creates a force that will serve customers dealers.

well.” Exodus Machines, based in Superior, Wis., was incorporated only three years ago and is now known for its innovative designs. Each of the company’s material handlers features an industry exclusive cab that lowers to the ground for easy ingress and egress and maintenance access. The wheel machines also feature independent planetary wheel drive for true all-wheel-drive. “It’s rewarding for our entire team to have Caterpillar acknowledge the value that the machines we developed bring to customers,” said Bruce Bacon, founder of Exodus and now president of the company. “And it’s exciting that our company will continue growing to serve an industry that we are passionate about.” In support of the alliance agreement, Caterpillar acquired a minority equity interest in a new entity, Exodus Machines LLC, formed by Exodus. In addition, Exodus plans to expand manufacturing in the Superior area and is working to secure working capital and capital funding, developing plant layouts, assessing building sites and estimating needs for new employees.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 25


Page 26 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Custom Made Products Co. Humboldt, IA (800) 760-7871 Call Anytime 70 to 80 Scrapers on Hand at 8 Locations FOR SALE OR FOR RENT Iowa Locations: Humboldt, Huxley, De Soto, Iowa Falls, Union, Manchester, Dunlap Nebraska Location: Tecumseh

www.gncmp.com

We W ill Not Be Undersold!

Free Delivery!

18yd Ashland I-180 TS2s (New & Used) Call

11yd Ashland I-110 XL2s (New & Used) Call

GRADERS

BIG DOG

Art’s-Way Graders, (New & Used) ................................................Call Johnson Graders (New & Used)....................................................Call All sizes available for either Manufacturer

8yd Big Dogs, (New & Used) ........................................................Call

ASHLAND 18yd Ashland I-180 TS2s, (New & Used) ....................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call 15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call 13yd Ashland I-130 TS2s, (New & Used) ....................................Call 13yd Ashland I-130 XL2s, (New & Used) ....................................Call 11yd Ashland I-110 TS2s, (New & Used) ....................................Call 11yd Ashland I-110 XL2s, (New & Used) ....................................Call 9yd Ashland I-900’s & I-950’s, (New & Used)..............................Call Ashland Groundhog GH2500, (New & Used) ................................Call

6 1/2yd Big Dogs, (New & Used) ..................................................Call 5yd Big Dogs, (New & Used) ........................................................Call 12’ Feedlot Box Scrapers..............................................................Call 10’ Feedlot Box Scrapers..............................................................Call 12’ Box Scrapers ..........................................................................Call 10’ Box Scrapers ..........................................................................Call

NEW & USED ROWSE 7yd Rowse Model 7002 & 7004....................................................Call 5yd Rowse Model 7002 & 7004....................................................Call 3yd Rowse Model 3002 ................................................................Call

MISCELLANEOUS

GARFIELD

1 1/2yd & 3yd Durabilts Model DP60 & DP84, (New & Used) ....Call

12yd Garfield Model 1150s, (New & Used)..................................Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

3/4 yd G&A Mini Scraper, (New & Used)......................................Call 8’ Hoelscher PT-8 Lawn Roller, (New) ........................................Call 4’ Dura Grade Model DG4E Electric Lift, (New) ..........................Call


CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 18, 2012 â&#x20AC;˘ Page 27

Â&#x160;Â&#x2022;Â&#x2022;ČąÂ&#x2DC;Â&#x17E;Â? Call DougȹȌ/ČąÂ&#x160;Â&#x;Â&#x17D;ǹȹȹ Sam: (866) 485-7180  

2007 Komatsu D65EX-15; #81435, Cab/AC, Sweeps, Rear & Side Screens, 1700 Hrs............ ............................................................$179,500

Finn T60; #81550, 25hp Kohler Engine, 600 Gallon Tank, 800 Hrs ............................$17,500

2007 Komatsu WA250-5; #81402, Cab/AC, QC/3 Yd Bkt, 3rd Valve, 3100 Hrs ......$109,500

1999 Volvo A40; #91495, 40 Ton Truck, Rebuilt Transmission ........................................$79,500

2000 Cat IT38G; #81555, QC/Bkt/48â&#x20AC;? Forks, 3rd Valve, 10,400 Hrs..................................$59,500

2003 Komatsu D65PX-15; #80775, Cab/AC, 36â&#x20AC;? Shoes, Drawbar, 5400 Hrs............$129,500

2006 Cat 953C LGP; #81423, Cab/AC, GP Bkt w/Teeth, 2100 Hrs ..............................$119,500

1993 Komatsu PC300LC-5; #91561, 33.5â&#x20AC;? Tracks, 13â&#x20AC;&#x2122; Arm, JRB QC ......................$51,000

2005 Komatsu PC228USLC-3; #81385, Cab/AC, Aux Hyd, 2475 Hrs..............................$129,500

2005 Deere 410G; #81583, Cab/AC, Ext-A-Hoe, Aux Hyd, 900 Hrs..................................$67,500

2007 Komatsu D39PX-21; #81560, A/C, 25â&#x20AC;? Shoes, Sweeps/Rear Screen, 3350 Hrs $59,500

2002 Komatsu CD60R-1; #81226, Roadliner Tracks, 2600 Hrs ..................................$79,500


Page 28 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Equipment Guide Special Pricing... Say You Saw it in CEG!

Now Serving You with 13 Locations including Ohio.

www.ruddequipment.com Albert Medcalf Office: (502) 456-4050 • Cell: (502) 592-6510

2010 Hitachi EH750-3, s/n 8R1ABN 00001010, 41 Hrs CALL

Euclid Hitachi R170 Rigid Frame Truck, s/n 75144, Rebuilt

2009 Volvo PF6110, s/n 200831, 1015 Hrs $215,000

2009 Volvo DD112HF, s/n 200987, 221 Hrs, Excellent Condition $145,000

2007 Volvo A25D, s/n 72340, 5324 Hrs $175,000

2006 Volvo L330E, s/n 62291, 17,344 Hrs, equipped with 154” Volvo rock bucket $130,000

2003 Volvo L330E, s/n 62117, 23957 Hrs, and a Bucket $135,000

2000 L220E-LB, s/n 2027, 25,925 Hrs CALL

Murphy Tractor & Equipment Co. Adds New Stores in Ohio Murphy Tractor & Equipment Company, Inc., has added two new stores, located in Chillicothe, Ohio, and Cambridge, Ohio, formerly Leslie Equipment Company. Murphy Tractor & Equipment Company Inc. will now be responsible for the John Deere Construction and Forestry lines, previously represented by Leslie Equipment Company. The addresses and phone numbers of the acquired dealerships will remain the same. The Cambridge branch is located at 60611 Hulse Road, Cambridge, Ohio, 43725, and the telephone number is Murphy Tractor & 740/439-2747. The Chillicothe branch is located Equipment at 5775 US Highway 23, Company Inc. will Chillicothe, OH., 45601, and now be the telephone number is responsible for the 740/663-5300. The recent acquisition, John Deere which took effect on Feb. 6, brings the total of Murphy Construction and Tractor & Equipment Forestry lines. Company, Inc. locations to 28. “We are very excited about the addition of the new stores, as we are committed to being the product and support supplier of first choice in the areas we serve. We continue to grow in the Ohio area due to its match to our Midwestern values and similar markets,” said Tom Udland, president of Murphy Tractor. “All employees at both locations will remain with the company, which we believe will result in a smooth transition”. Murphy Tractor and Equipment Company Inc., one of John Deere’s largest North American construction equipment dealer organizations, is currently headquartered in Wichita, Kan. The organization has 26 locations throughout the mid-western states of Iowa, Kansas, Missouri, Ohio, Pennsylvania and Nebraska. For more information, visit www.murphytractor.com.

Ky. Seeks Contractors to Design, Build Bridge TOPEKA, Kan. (AP) State officials say they will accelerate work on 32 road projects worth nearly $50 million to take advantage of low construction prices. Legislative leaders and Gov. Sam Brownback said Jan. 27 the accelerated projects will create 470 construction jobs and another 900 indirect jobs. Construction is expected to begin this fall. The projects are mostly repair and reconstruction of roads and bridges. Many of the projects had been scheduled for next year and others did not have a start date. The 32 projects are part of a 10-year, $8 billion transportation program passed by last year’s Legislature.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 29

CRUSHING EQUIPMENT, PARTS & SERVICE Terry Hennessey 800-845-9188 terry.hennessey@fabickcat.com

Fenton, Missouri 800-845-9188 www.fabickcat.com

Go to www.fabickcat.com for a complete listing and description of our new and used equipment.

Portable Screen Telsmith offers an array of inclined and horizontal portable screening plants that have been designed to meet the variety of challenges encountered in different applications. Whether you need the ruggedness required when scalping large stone, to the finesse necessary for finish sizing, Telsmith has an efficient portable solution to meet your site needs.

Model TJ3258 - Jaw Crusher Designed around the Telsmith 3258 hydraulic jaw crusher, the TJ3258 is specifically designed to deliver high production while processing hard, abrasive stone. With a large crusher gape and width, the 3258 processes larger feed and has greater crushing capacity than competitive models. The 3258 jaw also incorporates unique hydraulic features proven to reduce maintenance and downtime to an absolute minimum: • Hydraulic Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Chamber Clearing: safely clears the crusher in minutes for increased uptime.

Model TI6060 - Impact Crusher Featuring the heavy duty Telsmith PA6060 Primary Impact Crusher, this plant is engineered for maximum productivity while processing less abrasive quarried stone or concrete recycle. Capable of receiving 40” stone or 58" wide concrete slabs, the PA6060 has proven to be a dependable, low cost producer. Advanced hydraulic features built into the PA6060 reduce maintenance and downtime providing increased production: • Hydraulic Apron Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Tilt Feed Plate: safely clears bridging in minutes for greater uptime.

DID YOU KNOW? For over a hundred years, Telsmith has designed and manufactured in the United States of America.

Crushers should operate for decades. With that standard in mind, Telsmith designs, manufactures and services a range of jaw, cone and impact crushers as well as single-deck to quad-deck screens.


Page 30 • February 18, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

West Side Tractor Sales Co. www.westsidetractorsales.com

888-504-0231

Naperville, IL

Featured Machine 2006 CAT AP-655C $289,900

Stk #: C439, 235 Hrs, Hyd Screed Extens, Paving Width - 8’2” to 14’2”, Topcon Sys

Patten CAT Appointed New MB Attachments Dealer Patten CAT, of Elmhurst, Ill., was appointed as an authorized MB America Dealership. Patten will be a stocking dealer, making MB crushing and screening attachments available at all of its branches. Len Scala, Patten Industries equipment sales operations administrator, first discovered the MB attachments in the summer of 2011, while researching another project. By August, discussions began between Scala, MB America Inc. CEO Max Ravazzolo and MB’s Northeast Regional Sales Manager, Casey Reed. A demolition demonstration was set up for Nov. 30, 2011, at Patten’s headquarters, in Elmhurst. Reed, along with Patten CAT Technician Steve Rajzer, prepared a Caterpillar 336 for the demonstration. Don Styx, Patten’s demo operator, rolled the 336 out to an audience ready for some serious crushing. “A good part of the audience were sewer and water guys,” Scalla recalled. “They had heard about the crusher and wanted to see it working. Seeing that they could just pull up small step no. 34

FETCH THIS PAPER YOURSELF TAKE A SMALL STEP TO GET HEALTHY www.smallstep.gov

“Fetch this Paper” 85 line screen d

curbing and crush it right there was a big selling point. One customer was saying he spends big bucks to haul waste off for crushing and then to haul it back for reuse. After the demonstration, he was ready to buy. He knew the unit would pay for itself quickly.” Within the two hour demonstration, MB’s crusher demolished numerous buckets of cement. Customers who asked how quickly the output size could drop from 5 to 2 in. (12.7 to 5 cm) waited only moments. From attendance, to equipment performance, the event was a success and an alliance was formed between the two companies. MB crushing and screening buckets attach to any excavator of 9 tons (8 t) and up. They are practical for on-site demolition, excavation, roadwork, quarries and more. The equipment is suited for all demolition and earth-moving situations; offers fast project start-ups; defrays recycling and fuel charges (associated with hauling waste to a dump); and is economically friendly, according to the company.

The Road Connection: The Long Drive for Transportation Reform The official Road Connection Truck will be leaving its South Dakota home for nine months to travel the United States to showcase the importance of funding for better roads. The Road Connection truck will crisscross the United States holding events at trade shows, demo days, open houses, road construction sites and equipment dealer locations to educate Americans about the need for positive change in the national transportation system. The kick-off event for The Road Connection took place at the Associated Equipment Distributors (AED) Summit and CONDEX Trade Show at the Gaylord National Resort and Convention Center in Washington, D.C., on Jan. 18, 2012. Curt Peterka, advertising manager of Kolberg Pioneer Inc. (KPI), of Yankton has the unique responsibility of driving the truck and spreading The Road Connection message. On his nationwide tour, Peterka will be supported by Andrew Gillman, a mobile journalist from Performance Marketing in West Des Moines, Iowa, who will provide real-time updates on dealer stops, trade shows and other notable events along the way. KPI-JCI and Astec Mobile Screens are the primary sponsors of this initiative and will take an active role in encouraging support and sponsorship by other companies in the transportation and construction industries. For more information, visit www.theroadconnection.org.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 31

10’ Service Van $32,995

4x2 Service Body $28,995

Aluminum Utility Van $33,995

12’ Cube Van $28,995

Work Van $22,995

4x4 8’ Flatbed $30,995

12’ Flatbed $30,995

11’ Dump $37,995

Diesel Flatbed $38,995

Utility Van $32,995

4x2 Ext Service Body $31,995 Hot Shot Food Delivery $34,995

4x4 Service Body $32,995

12’ Dually Cube $31,995

12475 Plaza Drive, Eden Prairie, MN 55344

www.suburbanchev.com

4x4 Red Service Body $32,995 Ext. Red Service Body $34,995

866-849-6234

*All Sale Prices Include Manufacturer Rebate & Commercial Rebate For Qualified Commercial Customers To Dealer, Not Including Tax Or License.”


Page 32 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Titan Machinery, G & B Construction Team Up to Do Job Right How do you take on one of the top 10 construction projects currently going on in the United States? You make sure you have the right equipment for the job. That’s exactly what G & B Construction Owner John Gayewski of Burlington, Iowa, is doing as he and his company get valuable assistance and guidance from Titan Machinery while being part of the project to build a new maximum-security prison in Fort Madison, Iowa. “We’ve done a lot of big projects over the years but this is by far the biggest,” said Gayewski. The $125 million project began in January 2011 and is slated for completion in July 2013. According to the State Treasurer the project is completely funded through the fees and fines assessed to offenders in Iowa, with no property or income taxes going towards the project. At this point in time, even with the usual delays due to weather, everything is still on schedule to reach that goal and have the 800 bed prison ready for use next summer. “There really haven’t been any serious delays with the project,” said Titan

So far, G & B Construction and Titan Machinery have put a series of Case equipment pieces to work including the 9050B, CX460, CX210, CX160 and CX330 excavators, a 750K crawler dozer, the 440CT and 450 CT skid steers, a 1850K dozer and a CX50 tractor, just to name a few.

Overall, G & B Construction is using 22 pieces of equipment including nine excavators, three dozers, two loader/backhoes, four skid steer, two telehandlers, two haul trucks and numerous attachments all bought or rented from Titan Machinery.

Machinery Davenport Store Manager Jason Wentland. “Overall, it has had a positive economic impact on jobs and consumer spending.” The long-term effects will mirror what is happening while the project is under way. “In addition to providing a state-of-the-art prison for the community, the new facility will create more employment opportunities for local residents,” added Wentland. Wentland has been instrumental in seeing the project get up and going with G & B Construction, specifically helping the company get equipment that will best fit the job

at hand. “I like to buy Case because they make good products that help my business thrive and it supports my local economy because of the Case Plant in Burlington,” said Gayewski. “Titan Machinery has done an excellent job of delivering what I need when I need it. They have a knowledgeable friendly staff, excellent sales and service support, in other words good people. “This relationship is crucial to help me complete these larger jobs in a timely manner as I have never been late on a job deadline.”

So far, G & B Construction and Titan Machinery have put a series of Case equipment pieces to work including the 9050B, CX460, CX210, CX160 and CX330 excavators, a 750K crawler dozer, the 440CT and 450 CT skid steers, a 1850K dozer and a CX50 tractor, just to name a few. “We provide G & B with a ‘resident’ tech to help out with their day to day operations,” said Wentland. “John has been open to providing positive and candid feedback on the level of parts and service support he gets from Titan Machinery.” Overall, Gayewski is using 22 pieces of equipment including nine excavators, three dozers, two loader/backhoes, four skid steer, two telehandlers, two haul trucks and numerous attachments all bought or rented from Titan Machinery. “G & B has been a loyal customer of Case equipment and one of the biggest customers for our Store,” said Steve Howland, field marketer for Titan Machinery — Davenport. “We really enjoy working with their guys. They are professionals and it’s been fun to watch their company grow over the years.” In the early stages of the project, the job mostly involved earthmoving, with some paving and rehabilitation work, as they start-

ed to install the concrete structures for the prison build. G & B Construction, who had 25 workers on site working a shift a day over the summer, was the only Iowa bidder for the job. The company has had to work around some challenges while tackling the job, including the use of crane pads over excavation in buildings to compensate for differential settling. Another challenge was dealing with the soft and over-cultivated soil that made it difficult to reach good compaction levels. Once completed, the project will include 44 acres of buildings configured on 124 square acres of land. Gayewski, who is originally from New York, has been in business in Burlington for 30 years, first starting as a roofer and later moving into demolition. “Starting out in the business hanging shingles in 90-degree plus weather has taught me the value of hard work and staying focused on the job, said Gayewski. “I enjoy the challenge of these larger projects. “In a lot of ways running one of these projects is just like working a roofing job — you’ve got to be on top of your game at all times.” CEG Staff


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 33

800-333-5993 Bill Misgrave Ext. 2210 bmusgrave@altorfer.com Corporate Office Cedar Rapids, IA.

Locations in Iowa, Illinois & Missouri BUY • SELL • CONSIGN • RENT

2006 CAT 953C, S/N BBX02536, 1132 Hrs ..$115,500

2008 CAT D6T LGP, S/N KJL00514, 4031 hrs $210,000

Complete inventory & photos at:

www.altorfer.com 2005 CAT CP-433E, S/N ASN00421, 1288 Hrs $39,000

2006 CAT 613C II, S/N 8LJ02973, 1983 Hrs $126,500

2008 CAT 297C, S/N GCP00574, 2167 Hrs ....$39,600

2000 CAT 966G, S/N 3SW00855, 9689 Hrs $110,000

2005 CAT D5N LGP, S/N AKD01429, 1106 Hrs $103,500

2008 CAT 12M, S/N B9R00104, MS, PB, 695 Hrs $248,000

2001 CAT 430D, S/N BNK01209, 7004 Hrs........$35,750

2007 CP-563E, S/N CNT01572, 1261 hrs ....$116,700

Contact Southeastern Equipment to Check Out the New Models of Case Construction Equipment

New “N” Series Backhoes

New “F” Series Wheel Loaders

New “Alpha” Series Skid Steers

Other Equipment Available Through Southeastern Equipment

Schwarze Street Sweepers

Terex Roadbuilding Pavers

Schwarze Asphalt Patchers

Carlton Wood Chippers

Etnyre Distributors & Chip Spreaders

Vacall Sewer Equipment

New CX55B Compact Excavator

New “C” Series Excavators

Cambridge, OH 740-432-6303

Monroe, OH 513-539-9214

Heath, OH 740-522-3500

Burlington, KY 859-586-6133

North Canton, OH 330-494-3950

Mentor, OH 440-255-6300

Mansfield, OH 419-529-4848

Novi, MI 248-349-9922

Gallipolis, OH 740-446-3910

Perrysburg, OH 419-874-0331

Marietta, OH 740-374-7479

Holt, MI 517-694-0472

Dublin, OH 614-889-1073

Brunswick, OH 330-225-6511

Brilliant, OH 740-598-3400

Bomag Recyclers / Stabilizers

Eagle Crusher Plants

www.southeasternequip.com


Page 34 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Seventh Annual Auction Raises Record-Breaking Revenue The National Steering Committee (NSC) for the Concrete Industry Management (CIM) program — a business intensive program that awards students with a four-year Bachelor of Science degree in Concrete Industry Management — raised more than $617,750 in gross revenue at its seventh annual auction, held in conjunction with the World of Concrete on Jan. 25. “The National Steering Committee of the Concrete Industry Management program is pleased to report that the 2012 World of Concrete Auction surpassed last year’s total proceeds by more than $100,000 and exceeded the previous record by $50,000,” commented Eugene Martineau, executive director of the NSC. “This is yet another example of the high value the concrete industry places on the CIM program. The NSC appreciates the record number of 155 donated items and all the bidders that helped make this year’s auction a huge success.” The signature item this year was a Mack Truck model GU813 equipped with a McNeilus 11-cu.-yd. (8.4 cu m) concrete mixer donated by Mack Trucks Inc. and McNeilus Co., a Division of Oshkosh Truck. The winning bidder of the mixer truck was Danny Rodgers, president of MMC Materials Inc., an operating company of Dunn Investment Company.

“We are thrilled how everyone stepped industry and the graduates. up to donate and bid on the great auction The goal of the program is to produce items and support the CIM program,” broadly educated, articulate graduates continued Martineau. “The money raised grounded in basic construction managewill benefit the National Steering ment, who are knowledgeable of conCommittee and support the current CIM crete technology and techniques and are program as well as help fund future proable to manage people and systems as gram expansion.” well as promote products or services Photo courtesy of Otto Nero related to the concrete industry. It entails “Thanks to the incredible support of the event from the World of Concrete Show The winning bidder of the auction signature a broad range of courses, from English Management, Hanley Wood Publications, item was Danny Rodgers, president of MMC and history to science and mathematics. McNeilus Companies Inc., Mack Trucks Materials, Inc. (L-R) are Eugene Martineau, A series of required business courses Inc., and Ritchie Bros. Auctioneers, the executive director, Concrete Industry such as finance, marketing, management auction was a complete success,” said Management Program National Steering and business law also are taken throughCommittee; Curtis Dorwart, vocational marMartineau. keting manager, Mack Truck Inc.; Rodgers; out the length of the program. In addition to the live auction, a silent and Tom Harris, vice president, McNeilus Co. The concrete-specific courses teach auction also was held. Auction items the fundamentals of concrete, properties included cement, a skid steer, concrete and testing, concrete construction and first of its kind in the United States — a foursaws, drills, mixers, vibrators, scaffolding, year Bachelor of Science degree in Concrete more. All of these courses provide much safety equipment, screeds, fiber transport Industry Management. The need for such a more than what is simply in the text — they systems, dust collectors, NDT equipment, program was recognized in 1994 and was emphasize problem solving, quality assurdecorative concrete tools, water meters, put into action by the concrete industry. The ance and customer satisfaction. They utilize pumps, generators, training sessions, refer- end-result was a partnership between the practical case studies and an internship to ence books, advertisements, laptop comput- concrete industry and Middle Tennessee make sure the student obtains real-world ers, sports memorabilia, sports travel pack- State University (MTSU) to develop the experience essential to starting a successful ages, golf school packages and vacation CIM program, implementing it with its first career. Additional opportunities for growth travel packages. two students in 1996. Available at MTSU, include on-campus socials and other organArizona State University, California State ized events providing industry networking About CIM University, Chico, Texas State University and professional development. Receiving tremendous support from the and the New Jersey Institute of Technology, For more information, visit www.concretconcrete industry, the CIM program was the the program has been successful for both the edegree.com.

Indy Road Repairs on Fast Track With Accelerate 465 ROADS from page 1

capacity, improve motorist safety and interstate access, and upgrade the road design to current standards. In late 2005, Governor Mitch Daniels launched an aggressive 10-year, $10 billion transportation plan, known as “Major Moves,” to significantly improve and expand Indiana’s highway infrastructure. A total of $2.6 billion was committed to Major Moves from the long-term lease of the Indiana Toll Road and the plan called for 104 new roadways by 2015 with 1,600 lane mi. (2,575 km) Under the Major Moves program, 36 percent of Indiana’s state road inventory will undergo pavement replacement or major rehabilitation. Additionally, 1,190 bridges will be refurbished or replaced. Accelerate 465 is one of the projects benefiting from the Major Moves plan. The largest component of the project was the interchange at I-74/Crawfordsville Road. This interchange was redesigned to increase capacity, decrease travel time and address weaving, routing, and stopping sight distance deficiencies. The new interchange separates traffic traveling from interstate to interstate from traffic traveling from inter-

state to the non-freeway, urban arterial (US 136/Crawfordsville Road). To achieve this separation, a service interchange with semidirectional ramps was constructed providing full access between US 136/Crawfordsville Road with both I-74 and I-465. A system interchange provided direction, free flow movement between I-74 and I-465. Adjacent to the I-74 interchange is the US 136 crossing. The alignment of this highway was altered at the intersection of Crawfordsville Road and High School Road to allow US 136 and Crawfordsville Road traffic to travel along the same alignment, thus changing the intersection of US 36, Crawfordsville Road and High School Road from a four-leg intersection to a T-intersection. As a result, operational confusion in this area was eliminated, and the transition from I-74 to Crawfordsville Road was more apparent — creating a safer conversion from freeway to arterial. To decrease travel time, the existing north bound to west bound and south bound to loop ramps were removed and replaced with higher speed directional flyover ramps. This eliminated the hazards associated with the weaving areas of the existing full cloverleaf interchange. The I-74/Crawfordsville

Rd./US 136 portion of the project totaled $65.1 million. The I-70 Interchange was another hot spot in the Accelerate 465 program. I-70 runs along the south side of the Indianapolis International airport and has four lanes of collector distributors running parallel. The redesign of this interchange increased capacity, eliminated a hazardous weave section, and improved travel times by replacing the existing 25 mph east bound to north bound loop ramp with a 40 mph directional flyover ramp. Capacity was further increased by adding a second lane to the eat bound to north bound and north bound to west bound ramps. The south bound to east bound and west bound to south bound loop ramps merge onto a collector-distributor ramp and are separated from mainline traffic by a concrete barrier. The east bound to south bound ramp, added to this collectordistributor system before merging with I-465 traffic as a two-lane ramp entrance, provides driver safety and travel time benefits by reducing weaving conflicts between ramp traffic and freeway traffic. Within the limits of this project, all I-70 pavement and structures were replaced. The design of I-70 provides a sufficiently wide

grass median to allow for the possibility of future lane additions to I-70 and matches what was recently constructed to the west. The redesign of this interchange also addressed existing drainage problems. There are seven contracts assigned to the program. Burns Construction, Weddle Brothers and Milestone Contractors had one each. Walsh Construction, operating out of their Crown Point office, has the other four. All continuing construction from this point forward is under the direction of Walsh. With the project nearly complete, Accelerate 465 has improved pavement conditions, provided safe, more efficient interchange designs, and added additional northbound and southbound travel lanes in designated locations. This project also ensures safe and efficient bicycle/pedestrian facilities to improve the mobility, connectively and sense of community to neighborhoods that adjoin the project corridor. Rated by INDOT as one of its top projects, work on Accelerate 465 started in 2007 and most major construction is now complete. Final construction work will be finished in fall 2012 – nearly two years ahead of the original plans.


Page 36 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

44 see CHART page

CATERPILLAR MODEL 301.6C 301.8C 303.5D CR 307D 308D CR 308D CR SB 314D CR 320D L 320D LRR 329D L 328D LCR 345D L M315D M322D

KOBELCO MODEL 140SR 215SR 235SR SK170LC SK210 Mark 9 SK260 Mark 9 SK295 Mark 9 SK350 Mark 9 SK485 Mark 9 SK850LC Super Acera ED150 ED195

KUBOTA MODEL K008-3 KX41-3V KX91-3S2 KX121-3S 6-in-1 Blade KX057-4 KX080-3 Standard Boom m KX080-3 Super Double Boo U17 U35S2 U45S

ENGINE HP (KW) Mitsubishi L3E 18.1 (13.5) Mitsubishi L3E 18.1 (13.5) Mitsubishi S3Q2-T 30 (22) .5) Mitsubishi 4M40 TL 55.6 (41 .5) (41 6 55. TL 40 4M ishi sub Mit .5) (41 6 55. TL 40 Mitsubishi 4M Cat C4.2 ACERT 90 (67) Cat C6.4 ACERT 148 (110) Cat C6.4 ACERT 148 (110) Cat C7 ACERT 204 (152) Cat C7 ACERT 204 (152) Cat C13 ACERT 380 (283) Cat C4.4 ACERT 135 (101) Cat C6.6 ACERT 165 (123)

ENGINE HP (KW) 94 (70) 153 (114) 153 (114) 121 (90.2) 169 (126) 190 (141) 197 (146) 286 (213) 345 (257) 496 (369.7) 94 (70.1) 121 (90.2)

ENGINE HP (KW) 10.3 (7.68 ) 17.0 (12.67) 29.6 (22.07) 40.5 (30.20) 47.6 (35.49) 70.0 (52.19) 70.0 (52.19) 17.0 (12.67) 29.6 (22.07) 40.5 (30.20)

DIGGING DEPTH FT. (M)

OPERATING WEIGHT LBS. (KG)

7.6 (2.3) 7.6 (2.3) 10.3 (3.1) 13.3 (4.1) 13.4 (4.1) 13.7 (4.2) 19.5 (5.9) 24.8 (7.6) 20.3 (6.2) 25.7 (7.8) 23.9 (7.3) 26.8 (8.2) 19.3 (5.9) 21.3 (6.5)

3,549 (1,610) 3,704 (1,680) 7,800 (3,538) 15,600 (7,076) 17,300 (7,847) 18,500 (8,392) 30,900 (14,016) 47,400 (21,500) 52,200 (23,678) 64,500 (29,257) 76,500 (34,700) 101,870 (46,208) 34,700 (15,740) 45,200 (20,502)

DIGGING DEPTH FT. (M)

OPERATING WEIGHT LBS. (KG)

12.5 (3.8) 12.5 (3.8) 17.5 (5.3) 20.2 (6.2) 20.3 (6.2) 22.6 (6.9) 28.3 (8.6) 34.9 (10.6) 30.2 (9.2) 36.6 (11.2) 35 (10.7) 39.7 (12.1) 30 (9.1) 33.8 (10.3)

DIGGING REACH FT. (M)

19.6 (5.98) 21.6 (6.59) 21.7 (6.65) 21.4 (6.52) 21.3 (6.49) 22.8 (6.94) 23.6 (7.19) 24.8 (7.56) 25.6 (7.81) 31.8 (9.7)

32,040 (14,735) 54,700 (24,800) 56,865 (26,700) 37,800 (17,146) 47,840 (21,700) 59,524 (27,000) 68,343 (31,00) 80,909 (36,700) 111,774 (50,700) 177,330 (80,435) 35,900 (16,300) 44,800 (20,317)

DIGGING DEPTH FT. (M)

OPERATING WEIGHT LBS. (KG)

5.7 (1.73) 7.80 (2.38) 10.4 (3.16) 11.5 (3.50) 12.7 (3.87) 15.0 (4.57) 15.0 (4.57) 7.6 (2.31) 10.3 (3.13) 11.8 (3.60)

2,200 (997.9) 3,693 (1,675.1) 7,110 (3,225.0) 9,790 (4,440.7) 12,150 (5,511.2) 18,254 (8,279.9) 19,379 (8,790.2) 3,814 (,1730) 8,025 (3,640.1) 11,640 (5,279.8)

.COM

ENTGUIDE NSTRUCTIONEQUIPM CO W. WW T SI VI SO AL T LISTINGS. FOR ALL EQUIPMEN tact all the tion Equipment Guide to con Despite efforts by Construc this chart. s, not all of them appear in manufacturers of excavator

DIGGING REACH FT. (M)

DIGGING REACH FT. (M)


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 37

We’ve W ’ve become attached to your machines. Rammer Large Range hydraulic impact hammers

Rammer Mid-Range all-new ew w Model 2155 hydraulic impact hammers

AR Series™ hydraulic impact hammers

Ho-Pac ® vibratory compactor/drivers

Rammer Small Range hydraulic impact hammers

Hy-Ram® hydraulic impact hammers

Where can you go to get high performance boom-mounted attachments?

Allied Construction Products, LLC For over 65 years, we’ve developed many attachments that are legendary in the construction and demolition industries that demand high performance. Names like Ho-Ram, Hy-Ram®, Rammer, Ho-Pac® and Pedestal Breaker System Syste ™ are names that equal: UÊ Simple, proven design (Our attachments have high resale or trade-in value) UÊ U Reliable performance (If you purchased an Allied attachment, you’re probably still using it) CIM ratings, our attachments U Superior productivity (Compare AEM – formerly CIMA– get the job done faster) ©2012 Allied Construction Products, LLC

Contractor’s Mechanical Grapple material and waste handling systems

And, now Allied adds to that great family background with the Rammer, AR Series™ and all-new Hy-Ram® hammers. Allied’s attachments don’t take a back seat to any competitor. In particular, our Rammer product features a long-stroke design, all oil operation and ProControl. roControl. All of our high performance boom-mounted attachments are supported by the most respected parts and service organization in North America. Customer satisfaction is job one at Allied. Great products supported by people who know the industry and its customers. To put a high performance Allied attachment on your machine, call 1-800-321-1046 for the name of the Allied Distributor nearest you. We’ve become attached to your machines.


Page 38 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

CASE AUTHORIZED DEALERS

KENTUCKY

ILLINOIS Birkey’s Construction Equipment

Bale Equipment Solutions

Bloomington Galesburg Mattoon Urbana

Louisville Radcliff

(309) 827-0520 (309) 341-4360 (217) 235-3158 (217) 337-1781

Burris Equipment Ingleside

(502) 589-9901 (270) 352-5970

Diamond Equipment Bowling Green

(270) 781-1061

McKeel Equipment Company (815) 363-4100

Diamond Equipment

Murray Paducah

Mt. Vernon

Southeastern Equipment

(618) 242-2273

Luby Equipment Services

Burlington

Quincy Springfield

(217) 222-5454 (217) 744-2233

State Equipment

(630) 627-0000 (630) 739-7770 (815) 385-0420 (847) 526-9444

Corbin Lexington Prestonsburg

McCann Industries Addison Bolingbrook McHenry Wauconda

(859) 586-6133 (606) 928-5644

Wilson Equipment

Miller-Bradford & Risberg Rockford

Ashland

(270) 753-3062 (270) 444-0110

(815) 397-6200

(606) 528-0700 (859) 254-6443 (606) 874-8037

MICHIGAN Bridgeport Equipment Co. Bridgeport

INDIANA Diamond Equipment Evansville Terre Haute

(812) 425-4428 (812) 299-4747

MacDonald Machinery Co. Fort Wayne Indianapolis Lafayette South Bend

(260) 747-1561 (317) 856-3000 (765) 742-2080 (574) 271-0800 (219) 865-6545

Titan Machinery

KANSAS

* For For commercial commercial use use only. only. CCustomer ustomer pparticipation ar ticipation ssubject ubject ttoo ccredit redit qqualification ualification aand nd aapproval pproval bbyy CCNH N H CCapital apital America A merica LLC. L LC. See See your your Case C ase Dealer D e a ler for for details details and and eligibility eligibilit y rrequirements. e quir eme n t s . D Down own ppayment ayment iiss rrequired. equired. OOffer f fer ggood ood tthrough hr o ugh M March arch 331, 1, 22012 012 aatt participating par ticipating Case C ase dealers dealers in in the the United U ni t e d States. S tates. Not Not all all customers customers or or applicants a p p li c a n t s m may ay qqualify. ualif y. TTaxes, a xes, ffreight, reight, sset-up, et-up, ddelivery, eliver y, aadditional dditional ooptions ptions oorr attachments at tachments not not included included in in suggested sugge s ted retail retail price. price. Offer O f fer subject subject to to cchange hange oorr ccancellation a n c e ll a t i o n w without ithout nnotice. o t i c e. ©2012 CNH C N H America A merica LLC. L LC. All A ll rrights ights rreserved. eser ved. CCase ase iiss a rregistered egistered ttrademark rademark ooff CCNH N H AAmerica merica LLLC. LC. w w w.casece.com ©2012 www.casece.com

(906) 475-4181

Northern Michigan Equipment Traverse City

(231) 943-3700

Southeastern Equipment Holt Novi

(517) 694-0471 (248) 349-9922

Titan Machinery Lincoln North Platte Omaha

IOWA Center Point Clear Lake Davenport Des Moines Sioux City

Negaunee

NEBRASKA

McCann Industries Schererville

(989) 777-1900

Miller-Bradford & Risberg

(319) 849-3889 (641) 357-2511 (563) 386-0400 (515) 974-5100 (712) 239-4941

(402) 464-3711 (308) 532-6571 (402) 733-3700

MINNESOTA Titan Machinery Crookston Hermantown M h ll

(218) 281-4668 (218) 727-3038 ( )


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 39

w www.paladinconstructiongroup.com ww.paladinconstructiongroup.com C Connect onnect W With ith U Uss

WISCONSIN

MISSOURI Crown Power and Equipment

Miller-Bradford & Risberg

Columbia Eldon Jefferson City

Abbotsford De Pere Eau Claire Madison Sussex

(573) 443-4541 (573) 392-0230 (573) 636-5281

Luby Equipment Services Cape Girardeau Fenton

(573) 334-9937 (636) 343-9970

Potter Equipment Company Springfield

(417) 781-8222 (816) 241-9290

NORTH DAKOTA Titan Machinery Bismarck Dickinson Fargo Grand Forks Minot West Fargo Williston

(701) 250-7925 (701) 227-5309 (701) 237-3333 (701) 775-8111 (701) 852-3188 (701) 356-0130 (701) 577-0024

South Dakota Titan Machinery Aberdeen Pierre Rapid City Sioux Falls

(605) 225-0505 (605) 224-9247 (605) 388-0266 (605) 336-3434

OHIO Southeastern Equipment Brilliant Brunswick Cambridge Dublin Gallipolis Heath Mansfield Marietta

Titan Machinery La Crosse

(608) 788-1025

My Paladin attachments leave my business worry free, providing power, reliability and performance I can trust.

(417) 862-9275

Victor L. Phillips Company Joplin Kansas City

(715) 223-2381 (920) 338-5800 (715) 832-3443 (608) 222-9191 (262) 246-5700

(740) 598-3400 (330) 225-6511 (740) 432-6303 (614) 889-1073 (740) 446-3910 (740) 522-3500 (419) 529-4848 (7440) 374 7479

No Worries!


Page 40 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

We Have YOUR Track In Stock! » Call Today! REPLACEMENT UNDERCARRIAGE Bobcat®, Gehl®, Mustang®, Takeuchi®

We Keep Equipment Moving!

800-365-7260

View our website now:

Ashland, VA » Jacksonville, FL » Dallas, TX » Cincinnati, OH » Portland, OR » Sacramento, CA » Danbury, CT

WE ACCEPT

Order online anytime » depparts.com


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 41

WEST SIDE TRACTOR SALES CO. www.westsidetractorsales.com 1400 W. Ogden Ave. Napervile, IL 60563 630-355-7150 Fax: 630-355-7173 310 W. 162nd St. South Holland, IL 60473 708-331-6362 Fax: 708-331-7334 3110 Prairie Rd. Rockford, IL 61102 815-961-3160 Fax: 815-965-1810 1560 N. Old Rand Rd. Wauconda, IL 60084 847-526-7700 Fax: 847-526-3565 600 Walnut Court Rockdale, IL 60436 815-730-9011 Fax: 815-730-9036

AIS CONSTRUCTION EQUIPMENT CORPORATION www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-6275 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 Phone 989-777-0090 Fax: 989-777-1583

Be fuel efficient with clean-burning ning Interim Tier Tier 4-certified engines while maximizing your productivity with smoothrunning, greater--than-ever horsepower, arm force, digging force, and lift capacities.

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

See your Hitachi dealer today about the exciting new crop of Dash-5 excavators.

West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

www w.hitachiconstruction.com .hitac

the COLOR of QUALITY

Wichita, KS 67217 800/262-0139

Springfield, MO 888/306-2656

Vandalia (Dayton), OH 800/233-4228

Dodge City, KS 800/794-0172

Gering, NE 800/205-6784

Great Bend, KS 800/264-4056

North Platte, NE 800/894-7060

Topeka, KS 800/279-6087

Grand Island, NE 800/868-4017

Waterloo, IA 800/772-2019

Sioux City, IA 800/352-4693

Brunswick, OH 800/716-9796

Ulysses, KS 800/472-9238

Lincoln, NE 800/416-5518

Des Moines, IA 800/822-2212

Columbus, OH 800/222-2010

Painesville, OH 866/800-1395

Kansas City, MO 888/306-3434

Omaha, NE 800/416-5095

Fort Dodge, IA 800/362-2487

Cincinnati, OH 800/844-3734

MURPHY TRACTOR & EQUIPMENT CO. www.murphytractor.com

Lima, OH 800/423-7445 Canton, OH 866/235-0438

Poland (Youngstown), OH 724/837-4500 Chillicothe OH 740/663-5300 Cambridge, OH 740/439-2747

RDO EQUIPMENT CO. www.rdoequipment.com 12500 DuPont Ave. S. Burnsville, MN 952-890-8880 1910 LorRay Dr. North Mankato. MN 506-387-1836 1236 60th Ave. N.W. Rochester, MN 507-282-8888 6700 Highway 10 NW Sauk Rapids, MN 320-259-6222


Page 42 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109 10351 W. Laraway Rd. Frankfort, IL 60423 815/464-6650 Fax 815/464-6951

EVERYTHING YOU VALUE

www.kubota.com

HydrauliCircuit Adds Window Guard for Additional Protection, Easy Access HydrauliCircuit Technology’s heavy-duty front window guard package provides an additional layer of protection against flying debris to the front window and operator. Constructed with a tubular frame for added strength, the crimped woven mesh guard can be bolted on newer model machines. The weld-on universal model is available for most other model machines. A 6 in. spacer allows easy access to the windshield and welded tabs add additional strength. For more information call 888/603-0080 or visit www.hctkits.com.


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 43


Page 44 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

52 see CHART page

ge 36 CHART from pa

LBX COMPANY

ENGINE HP (KW)

MODEL 75 Spin Ace (Tier 4A) 135 Spin Ace MSR 210 X2LF 290 X2 250 X3 (Tier 4A) 470 X3

Isuzu AU-4LE2X 54 (40) Isuzu AJ-4JJ1X 95 (71) Isuzu AI-4HK1X 157 (117) 4) Isuzu AI-6HK1XYSS 207 (15 2) (13 177 K1X 4H Isuzu ALIsuzu AH-6UZ1X 362 (269)

HITACHI MODEL

ENGINE HP (KW) Yanmar 4TNV98 Isuzu 4LE2X Isuzu AI-4JJ1X Isuzu 4HK1X Isuzu AI-4HK1XYSA-02 Isuzu 6HK1XYSA-S2 Cummins QSK23 Cummins QSKTA50-C 2xCummins QSK60-C

DIGGING DEPTH FT. (M)

OPERATING WEIGHT LBS. (KG)

13.6 (4.14) 17.9 (5.45) 39.4 (12.01) 23.3 (7.10) 22.7 (6.91) 25.3 (7.71)

17,461 (7,920) 31,526 (14,300) 50,710 (23,000) 65,700 (29,801) 55,336 (25,100) 111,554 (50,600)

OPERATING WEIGHT LBS. (KG)

DIGGING DEPTH FT. (M) 12.3 (3.77) 13.5 (4.11) 21.3 (6.49) 20.7 (6.29) 22 (6.7) 26.8 (8.17) 26.4 (8.05) 27.0 (8.22) 13.4 (4.1)

13,653 (6,193) 17,743 (8,048) 37,908 (17,195) 23,588) 49,207 - 52,003 (22,320 53,936 (24,487) 76,258 (34,590) 246,917 (112,000) 560,000 (254,012) 1,787,900 (811,000)

ZX60USB-3 ZX75US-3 ZX160LC-3 ZX220W-3 ** ZX225USLC-3 ZX350LC-5 EX1200-6 BE backhoe EX2600-6 backhoe EX8000-6 BE backhoe e combinations outrigger and blad * canopy version s ou ri va , om bo k oc ** Wheeled, monobl

DOOSAN MODEL DX60R DX180LC DX225LC SLR DX420LC DX480LC SLR DX700LC DX55W DX300LL

JOHN DEERE MODEL 190D W 200D W 225D LC 470G LC 670G LC 870G LC

ENGINE HP (KW) 51 (38) 124 (92) 157 (117) 297 (221) 333 (248) 469 (349) 55 (41) 205 (152)

ENGINE HP (KW) 159 (119) 159 (119) 159 (119) 367 (270) 463 (345) 532 (397)

DIGGING DEPTH FT. (M)

OPERATING WEIGHT LBS. (KG)

12.3 (3.7) 20 .0 (6.1) 38.3 (11.67) 25.3 (7.73) 49.7 (15.14) 25.3 (7.71) 11.5 (3.5) n/a n/a

13,283 (6,025) 38,934 (17,660) 51,147 (23,200) 92,369 (41,898) 111,995 (50,800) 158,953 (72,100) 12,236 (5,550) 77,382 (35,100)

DIGGING DEPTH FT. (M)

OPERATING WEIGHT LBS. (KG)

19.2 (5.85) 20.7 (6.30) 22.0 (6.71) 27.2 (8.29) 30.0 (9.14) 31.4 (9.57)

969) 43,211 - 44,026 (19,600 - 19, ) 588 23, 9 ,31 (22 003 52, 49,207 4) ,46 (24 53,936 108,952 (49,419) 158,045 (71,688) 193,255 (87,658)

.COM

ENTGUIDE NSTRUCTIONEQUIPM CO W. WW T SI VI SO AL T LISTINGS. FOR ALL EQUIPMEN tact all the tion Equipment Guide to con Despite efforts by Construc this chart. s, not all of them appear in manufacturers of excavator

DIGGING REACH FT. (M) 21.0 (6.40) 26.5 (8.07) 50.8(15.48) 34.4 (10.48) 33.2 (10.11) 39.3 (11.97)

DIGGING REACH FT. (M) 20.4 (6.23) 21.0 (6.43) 30.6 (9.33) 33.3 (10.16) 32.8 (10.01) 38.9 (11.85) 45.0 (13.75) 54.5 (16.61) 60.6 (18.5)

DIGGING REACH FT. (M) 20.0 (6.09) 29.5 (8.98) 50.0 (15.24) 37.0 (11.29) 63.8 (19.44) 41.8 (12.74) 20.0 (6.09)

DIGGING REACH FT. (M) 31.4 (9.57) 33.3 (10.14) 32.8 (9.99) 43.8 (13.35) 43.5 (13.25) 57.6 (17.55)


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 45

POWERFUL SOLUTIONS

Contact act your full service dealer for more information

McCann Industries

Luby Equipment Services

Victor L. Phillips Co.

Star Equipment Ltd.

543 S. Rohlwing Rd Addison, IL 60101 630-627-0000

2300 Cassens Drive Fenton, MO 63026 636-343-9970

4100 Gardner Ave. Kansas City, MO 64120 800-878-9290

250 E. North Frontage Rd. Bolingbrook, IL 60440 630-739-7770

199 Airport Road Cape Girardeau, MO 63702 573-334-9937

5430 S. Highway 43 Joplin, MO 64804 800-878-8223

1401 2nd Avenue Des Moines, IA 50314 515-283-2215 Fax 515-283-0295 800-369-2215

2350 S. Laflin St. Chicago, IL 60608 312-942-9200

8853 Petrov Drive Caseyville, IL 62232 618-397-9971

6330 W. Highway 60 Brookline Station, MO 65619 800-955-2729

4701 West 137th Street Crestwood, IL 60445 708-597-3110

4375 Camp Butler Road Springfield, IL 62707 217-744-2233

1133 Indianapolis Blvd. Schererville, IN 46375 219-865-6545

2625 North 24th St. Quincy, IL 62305 217-222-5454

1360 N. Rand Rd. Wauconda, IL 60084 847-526-9444 4102 W. Crystal Lake Rd. McHenry, IL 60050 815-385-0420 www.McCannOnline.com

12770 W. Silver Spring Dr. Butler, WI 53007 262-373-2151 4621 Dutch Mill Rd. Madison, WI 53716 608-221-8300 www.kelbebros.com

www.lubyequipment.com

3250 North Hydraulic Wichita, KS 67219 800-878-3346 1304 SW 42 St. Topeka, KS 66609 800-878-4345 2203 West Jones Ave. Garden City, KS 67846 800-511-1435

Indy Equipment 6500 Schaff Rd. Independence, OH 44131 216-446-3200 Fax: 216-573-7712

2950 6th Street SW Cedar Rapids, IA 52404 319-365-5139 Fax 319-365-6726 800-728-5139 2100 E. Lincoln Way Ames, IA 50010 Ph: 515-233-9500 Fax: 515-233-9505 866-856-2312

Driven to provide maximum functionality and performance. Try a Takeuchi and feel the power ®

www.vlpco.com

Midwest Underground Supply Trenchers Plus

11159 Royalton Rd. North Royalton, OH 44133 440-237-9040

2309 West Highway 13 Burnsville, MN 55337 952-890-6000

35350 Chester Rd. Avon, OH 44011 440-832-7133

2210 26th St. South Moorhead, MN 56560 218-477-3447

www.indyequipment.com

2625 W. Airline Hwy. Waterloo, IA 50703 319-236-6830 Fax 319-236-6834 800-791-9249

Takeuchi understands the needs of the industry and responds with solutions. Track loaders feature high sprocket double reduction planetary reduction final drives which provide the most efficient use of power for more traction and digging force. Wheel loaders feature pushbutton 100% front and rear axle differential lock which provides immediate traction for superior digging and lifting power. Excavators feature pressure compensating piston pumps which provide smooth multi-function operation with unmatched breakkout force and control.

1106 32nd St. SW Bondurant, IA 50035 877-967-5656 8844 S. 135th St. Omaha, NE 68138 888-407-6500 27285 Ironworks Rd. Harrisburg, SD 57032 605-368-9880

The Power of Product and Support www.takeuchi-us.com


Page 46 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

Komatsu Launches PC390LC-10 Hydraulic Excavator With a flywheel horsepower of 257 hp (192 kW), the Komatsu PC390LC-10 is powered by a Komatsu SAA6D114E-5 engine and is EPA Tier IV Interim and EU Stage 3B emissions certified. Built upon a Tier III engine platform, Komatsu has leveraged its leadership in technology and innovation to design a more environmentally-friendly engine that increases power while decreasing fuel consumption, according to the manufacturer. Every Komatsu Tier IV Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first three years, whichever is first. Komatsu Care also includes two complimentary Komatsu diesel particulate filter (KDPF) exchanges within the first 5 years. The Komatsu CARE program covers all new Komatsu Tier IV Interim equipment, whether rented, leased or purchased. With an operating weight of With a flywheel horsepower of 257 hp (192 kW), the Komatsu PC390LC-10 is powered by a Komatsu SAA6D114E-5 engine and is EPA Tier 89,072 lbs. (40,402 kg), the IV Interim and EU Stage 3B emissions certified. PC390LC-10 features improved hydraulic efficiency, improved Komatsu. This integrated design uses a economy mode, heavy lift mode, breaker operator comfort, simplified maintenance to and provide diagnostic capability. Komatsu also has developed a hydrauli- closed center load sensing hydraulic system mode, and attachment mode. The new monextend component life and a large undercarriage design that increases lift capacity, cally actuated Komatsu variable geometry that has taken hydraulic efficiency to the itor panel also provides operational guidturbocharger (KVGT) and exhaust gas recir- next level using variable speed matching. ance, operational records, fuel consumption according to the manufacturer. The PC390LC-10 is equipped with the culation (EGR) valve, resulting in better pre- Variable speed matching allows the engine history, and utilization information while a latest KOMTRAX technology, which sends cision and air management as well as longer speed to adjust based on the hydraulic pump standard rearview camera allows the operamachine operating information to a secure component life. The Komatsu diesel particu- output for both light and heavy-duty applica- tor to view directly behind the platform. • Convenient Maintenance and Web site utilizing wireless technology. Data late filter (KDPF) has an integrated design tions. • Improved Operator Environment Serviceability such as operating hours, machine location, that will not interfere with daily operation The new cab provides a comfortable and The PC390LC-10 provides easy access to maintenance notifications, out of area notifi- but will keep the operator aware of its status. • Robust Undercarriage Design quiet work environment so operators can service locations in order to reduce costly cations, machine utilization and residual fuel The PC390LC-10 features a large under- maximize their productivity. The ROPS cer- downtime. The new model has extended levels are relayed to the web application for analysis. The KOMTRAX fleet monitoring carriage design that uses components from tified cab is specifically designed for handrails on the upper structure. The radiator system monitors machine availability, the larger size class PC450LC-8 undercar- hydraulic excavators and gains strength and hydraulic oil cooler are mounted side by reduces the risk of machine theft, allows for riage. While this design concept provides from a reinforced pipe-structured frame- side, making it simpler to maintain and servremote diagnosis by the distributor, and pro- high levels of reliability and long component work. The cab is mounted on viscous ice them when required. The machine is equipped with the vides a wealth of other information to drive life, the over side lift capacity also increases damper mounts, which provide low vibraup to 20 percent when compared to the tion levels. The high-back, fully adjustable Komatsu EMMS (equipment management business efficiency. Special features of the new PC390LC-10 PC360LC-10, providing improved lateral seat uses air suspension and is heated for monitoring system) that has diagnostic feastability in applications that require long improved comfort. An auxiliary input has tures that give the operator and technicians include: • EPA Tier 4 Interim and EU Stage 3B arms or heavy lifting at maximum reach. been added to connect an MP3 player or greater monitoring and troubleshooting The robust undercarriage design also fea- other device that uses a standard auxiliary capabilities. EMMS also continuously monEmissions Certified Engine Built upon proven Tier III technology, the tures larger final drives that provide up to 13 plug, along with two 12-volt ports that have itors all critical excavator systems, tracks the preventative maintenance schedule and proSAA6D114E-5 engine has a larger displace- percent more drawbar pull than the also been incorporated into the cab. A new high resolution 7 in. LCD monitor vides troubleshooting assistance to mechanment of 8.9 L and provides increased horse- PC360LC-10, according to the manufacturfeatures enhanced capabilities and displays ics in order to minimize diagnosis and repair power while lowering fuel consumption. er. • Highly Efficient Hydraulic System information in 25 languages for global sup- time. The Komatsu Tier IV Interim engine uses an All major components on the new port. The operator can easily select up to five All comparisons are to the PC350HD-8 advanced electronic control system to manage airflow rate, fuel injection, combustion PC390LC-10 including the engine, working modes of operation to match unless specified otherwise. For more information, visit www.komatparameters, and aftertreatment functions to hydraulic pumps, motors and valves are machine performance to the application. optimize performance, reduce emissions, exclusively designed and manufactured by These working modes include power mode, suamerica.com.


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 47

Buck & Knobby Equipment Co. 6220 Sterns Rd Ottawa Lake, MI 49267 734-856-2811 Titan Machinery Inc. 6304 Hwy. 101 Shakopee, MN 55379 952-445-5400 800-795-9274 Fax: 952-445-0365 14375 James Rd. Rogers, MN 55374 763-428-5009 4311 Haines Rd. Hermantown, MN 55811 218-727-3038 N1626 Wuensch Road La Crosse, WI 54601 608-788-1025 Vermeer Midwest 2801 Beverly Dr. Aurora, IL 60502 630-820-3030 PO Box 224 Eureka, IL 61530 309-467-3716 1801 179th Ave. Moline, IL 61244 309-751-9540 13402 Britton Park Rd. Fishers, IN 46038 317-842-1040 3566 Citadel Circle Newburgh, IN 47630 812-490-4400 3310 West Coliseum Blvd. Fort Wayne, IN 46808 260-484-2494 PO Box 273 17550 Chesterfield Airport Rd. Chesterfield, MO 63006 636-532-2332 1005 Thorez Rd. Jackson, MI 49201 517-750-3783 1196 A Franklin St. Marne, MI 49435 616-677-5900 Vermeer of Iowa PO Box 168-661 Hwy T14 Pella, IA 50219 641-628-2000 Vermeer Siouxland 4858 D Ave. Marcus, IA 51035 712-376-2310 Vermeer of Eastern Iowa 101 Commerce Blvd. Tipton, IA 50219 563-886-2444

Custom Truck & Equipment 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

Paint Valley Equipment 10550 Twp Rd. 262 Millersburg, OH 44654 877-774-0081 330-674-4031

Roeder Implement Inc. 2550 Rockdale Rd. Dubuque, IA 52003 563-557-1184 Fax: 563-583-1821


Page 48 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 49

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!


Page 50 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

maximize efficiency. minimize costs.

Let’s Work. Volvo Construction Equipment offers equipment that’s ideal for quarry work. Our wheel loaders feature our exclusive OptiShift technology for exceptional fuel efficiency, while our articulated haulers are designed for quick transport of aggregates. With the support of over 300 dealer locations across North America, the result is greater productivity for your crew – and a higher earning potential for you. Learn more about OptiShift by contacting a Volvo dealer near you. Visit volvoce.com/na today.

McALLISTER EQUIPMENT CO. 28775 Beck Rd. Wixom, MI 48393 248/449-6700 Muskegon, MI 231/798-8754 Kentwood, MI 616/698-2960

Battle Creek, MI 269/965-1269 Romulus, MI 734/641-8238 Saginaw, MI 989/752-9400

Sterling Hts, MI 586/977-6000 Zeeland, MI 616/748-4108 Lansing, MI 517/272-5033

Wixom, MI (Cons. Division) 248/356-5200 Byron Center, MI 616/878-7450

12500 S. Cicero Ave. Alsip, IL 60803 708/389-7700 Villa Park, IL 630/530-7600

Rockford, IL 815/227-0555 East Peoria, IL 309/694-4455 Springfield, IL 217/789-0351

Evansville, IN 812/867-6661 Fort Wayne, IN 260/482-3681 Indianapolis, IN 317/247-9125

Corbin, KY 606/528-9440 Louisville, KY 502/456-4050

Prestonsburg, KY 606/874-2104 St. Louis, MO 314/487-8925


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 51

WHY WORK YOUR TAIL OFF? John Deere compact excavators work their little tails off — so you don’t have to. Zero- and reduced-tail-swing designs allow them to rotate fully without banging into anything. Independent-swing boom and 360-degree rotation provide the extra maneuverability you need to work more productively within tight lot lines and setbacks. Standard mechanical quick-coupler and auxiliary hydraulics allow you to hook up to rakes, breakers, and augers for maximum versatility. Opt for a bucket with a thumb to handle large materials. Whether you’re digging retaining walls or trenches for drainage or septic systems, a Deere compact excavator will fit right in.

www.holtequipment. net Louisville, KY 40223 502/253-3721 1-800/507-9705 London, KY 606/862-8447 1-877/231-7151 Bowling Green, KY 42101 270/842-3400 1-866/528-9699 Richmond, KY 859/623-2030 1-800/463-8722

3600 North Grand River Ave Lansing, MI 48906 517/321-8000 Fax: 517/321-6275 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121

www.murphytractor.com

www.westsidetractorsales.com Naperville, IL 60563 630/355-7150 Fax: 630/355-7173

Indianapolis, IN 46219 317/544-3411 Fax: 317/544-3420

South Holland, IL 60473 708/331-6362 Fax: 708/331-7334

Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038

Rockdale, IL 60436 815/730-9011 1-800/937-3355 Fax: 815/730-9036 Rockford, IL 60012 815/961-3160 Fax: 815/965-1810 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

Bloomington, IN 47403 812/333-9677 Fax: 812/333-9731 South Bend, IN 46619 574/232-1461 Fax: 574/233-3324 Fort Wayne, IN 46825 260/482-8576 Fax: 260/483-4057

Park City, KS 800/262-0139

Gering, NE 800/205-6784

Sioux City, IA 800/352-4693

Painesville, OH 866/800-1398

Dodge City, KS 800/794-0172

North Platte, NE 800/894-7060

Columbus, OH 800/222-2010

Great Bend, KS 800/264-4056

Grand Island, NE 800/868-4017

Cincinnati, OH 800/844-3734

Poland (Youngstown), OH 866/503-7259

Topeka, KS 800/279-6087

Lincoln, NE 800/416-5518

Vandalia (Dayton), OH 800/233-4228

Omaha, NE 800/416-5095

Lima, OH 800/423-7445

Waterloo, IA 800/772-2019

Canton, OH 866/235-0438

Des Moines, IA 800/822-2212

Brunswick, OH 800/716-9796

Ulysses, KS 800/472-9238 Kansas City, MO 888/306-3434 Springfield, MO 888/306-2656

Fort Dodge, IA 800/362-2487

Chillicothe, OH 740/663-5300 Cambridge, OH 740/439-2747 Cranberry Twp, PA 724/776-3636 Delmont, PA 724/837-4500


Page 52 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

ge 44 CHART from pa

LIEBHERR MODEL A900C Litronic A904C Litronic A914C Litronic A924C Litronic R916 Litronic R924C Compact Swing R926 Litronic R934C Litronic R954C Litronic R974C Litronic

HYUNDAI MODEL 110D-7 140LC-9 145LCR-9 160LC-9 180LC-9 210LC-9 250LC-9 290LC-9 320LC-9 380LC-9 480LC-9 520LC-9 800LC-7A

VOLVO MODEL EC140D ECR145D EC160D EC250D ECR235D ECR305C EC340D EC380D EC480D EC700C EW160D EW180D EW210D

ENGINE HP (KW) 127 (95) 141 (105) 161 (120) 181 (135) 154 (115) 161 (120) 173 (129) 195 (150) 322 (240) 536 (400)

ENGINE HP (KW) Mitsubishi S4K-T 84 (63) (85) Mitsubishi D04FD-TAA 114 ) (85 114 A -TA 4FD D0 ishi sub Mit (90) 121 A -TA 4FD Mitsubishi D0 (90) Mitsubishi D04FD-TAA 121 7) (10 3 143 6.7 B QS ins Cumm 3) Cummins QSB 6.7 245 (18 7) Cummins QSB 6.7 197 (14 6) (19 262 C QS ins Cumm Cummins QSL 270 (202) 5) Cummins QSM11 342 (25 5) (25 342 1 M1 QS Cummins 6) Cummins QSX 15 490 (36

ENGINE HP (KW) D4H 113 (84) D4H 113 (84) D4H 139 (104) D8H 202 (151) D6H 172 (128) D7E EAE3 192 (143) D13H 283 (208) D13H 283 (208) D13H 348 (256) D16E EAE3 424 (316) D6H 154 (115) D6H 173 (129) D6H 173 (129)

OPERATING WEIGHT LBS. (KG) 19,413) 36,800 - 42,800 (16,692 92) 21,0 8 ,68 (18 41,200 - 46,500 906) 44,100 - 50,500 (20,003 - 22,582) 46,100 - 56,400 (20,910 - 22, 249) 27, 49,605 - 60,075 (22,500 - 049) 29, 49 1 , (25 043 64, 445 55, 28,299) 54,675 - 62,390 (24,800 - 98) 1 70,110 - 77,600 (31,801 - 35, 349) 53, 9 ,94 (48 5 ,61 117 5 107,91 - 101,300) 187,395 - 223,330 (85,000

OPERATING WEIGHT LBS. (KG)

54 see CHART page

DIGGING DEPTH FT. (M) 17.7 (5.39) 20 (6.1) 21.2 (6.5) 21.2 (6.5)

DIGGING DEPTH FT. (M)

26,235 (11,900) 30,820 (13,980) 33,951 (15,400) 38,691 (17,550) 41,005 (18,600) 48,281 (21,900) 55,556 (25,200) 64,595 (29,300) 72,752 (33,000) 84,216 (38,200) 105,042 (48,100) 112,435 (51,000) 181,484 (82,320)

OPERATING WEIGHT LBS. (KG)

20 (6.1) 19.7 (6) 21.5 (6.6) 21.5 (6.6) 22 (6.7) 23 (7) 24.6 (7.5) 24.2 (7.4) 24.7 (7.5) 25.6 (7.8) 26.9 (8.2) 23.8 (7.25)

DIGGING DEPTH FT. (M)

28,370 (12,868) 33,400 (15,150) 36,400 (16,510) 54,230 (24,598) 55,900 (25,355) 77,940 (35,352) 77,240 (35,035) 83,776 (38,000) 105,000 (47,627) 154,350(70,000) 37,715 (17,107) 39,900 (18,098) 43,430 (19,700)

UIDE.COM UCTIONEQUIPMENTG TR NS CO W. WW T SI ALSO VI T LISTINGS. FOR ALL EQUIPMEN tact all the tion Equipment Guide to con Despite efforts by Construc chart. this in s, not all of them appear manufacturers of excavator

18.2 (5.54) 17.3 (5.27) 19.8 (6.03) 22.0 (6.70) 22.0 (6.70) 22.8 (6.94) 22.0 (6.70) 22.0 (6.70) 21.6 (6.58) 27.6 (8.41) 18.8 (5.73) 20.0 (6.09) 21.3 (6.49)

DIGGING REACH FT. (M) 28.5 (8.7) 30 (9.1) 33 (10.1) 34.4 (10.5)

DIGGING REACH FT. (M) 28.8 (8.8) 28.8 (8.8) 31 (9.4) 31 (9.4) 32.8 (10) 34 (10.4) 35.5 (10.8) 36.6 (11.2) 36.9 (11.2) 39.7 (12.1) 41.5 (12.6) 40.2 (12.25)

DIGGING REACH FT. (M) 27.3 (8.32) 27.4 (8.35) 29.4 (8.96) 33.8 (10.30) 32.4 (9.87) 36.0 (10.97) 34.3 (10.45) 34.3 (10.45) 35.8 (10.91) 43.3 (13.2) 30.0 (9.14) 31.3 (9.54) 32.6 (9.93)


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 53

www.rdousedequipment.com VISIT www.rdousedequipment.com

2008 CAT D6N XL, STK# X346574, 4646 HRS, TX ..................$168,000

1995 CAT 928F, STK# X286805, 1535 HRS, MN ..................$37,800

2003 CAT 330CL, STK# BB442, 7784 HRS, CA..................$133,500

2008 BOBCAT 435H FAST TR, STK# X328570, 2105 HRS, MN ..$37,200

AERIAL LIFTS

CRAWLER LOADERS

SCRAPERS

1999 GEHL DL1044, STK# X337481, 4581 HRS, ND........................$45,000 TEREX TB42, STK# X319682, 7088 HRS, ND ....................................$6,000 TEREX TB50, STK# X319681, 6365 HRS, ND ....................................$6,000

1998 CAT 953C, STK# X319210, 10350 HRS, ND ............................$30,000 2001 CAT 953C, STK# BB482, 5012 HRS, CA ..................................$45,000 2008 JOHN DEERE 755D, STK# X291087, 4786 HRS, TX ..............$130,000

1997 CAT 613C, STK# BB347, 8239 HRS, CA ..................................$37,500 1999 CAT 613C, STK# BB229, 5552 HRS, AZ ..................................$75,000 1996 CAT 615C, STK# BB471, 2454 HRS, AZ ..................................$51,500 1998 CAT 615C, STK# BB409, 3054 HRS, CA ..................................$53,500 1996 CAT 623F, STK# BB405, 1383 HRS, AZ....................................$79,500 1999 CAT 623F, STK# BB532, 1597 HRS, CA ..................................$82,500 2000 CAT 623F, STK# BB530, 3475 HRS, CA ..................................$95,000 (3) 2003 CAT 623G, 3892-8670 HRS, AZ, CA ................$175,000-$290,000

BACKHOE LOADERS

EXCAVATORS

1996 CASE 590 SUPER L, STK# X343994, 6864 HRS, TX ..............$25,000 JOHN DEERE 310B, STK# X343575, 999999 HRS, TX ....................$10,000 1995 JOHN DEERE 310D, STK# X325507, 5342 HRS, ND ..............$24,000 2001 JOHN DEERE 310SG, STK# X346567, 6000 HRS, TX..............$26,500 (2) 2006 JOHN DEERE 310SG, 1683-4409 HRS, AZ, CA ..$42,000-$45,500 (3) 2007 JOHN DEERE 310SJ, 1494-2878 HRS, MT, TX,CA ..$48,000-$79,026 2008 JOHN DEERE 310SJ, STK# X321551, 3735 HRS, ND..............$70,000 (2) 2008 JOHN DEERE 410J, 3043-3126 HRS, AZ ....................$43,000 Ea. 2009 JOHN DEERE 410J, STK# X180108, 1499 HRS, AZ ..............$101,747 2007 JOHN DEERE 410TJ, STK# X070964, 1131 HRS, AZ ............$102,231 2008 JOHN DEERE 410TJ, STK# X336498, 970 HRS, AZ ................$97,000 1989 JOHN DEERE 510C, STK# X321394, 8783 HRS, ND................$20,000 2006 JOHN DEERE 710G, STK# X026631, 1488 HRS, AZ ..............$107,504 2008 JOHN DEERE 710J, STK# X321698, 3666 HRS, MN ..............$87,806

2008 BOBCAT 435H FAST TR, STK# X328570, 2105 HRS, MN........$37,200 2002 CAT 320CL, STK# BB433, 2957 HRS, CA ..............................$159,500 (2) 2005 CAT 320DL, 4203-4635 HRS, CA ....................$139,500-$140,000 2007 CAT 320DL, STK# X223850, 2065 HRS, CA ..........................$165,000 2008 CAT 320DL, STK# X223852, 1270 HRS, CA ..........................$170,000 2006 CAT 324DL, STK# X133554, 1112 HRS, CA ..........................$143,500 (3) 2002 CAT 325CL, 4314-11,322 HRS, AZ, CA..............$82,000-$125,000 (2) 2004 CAT 325CL, 6336-6933 HRS, AZ, CA ..............$108,500-$154,500 2005 CAT 325CL, STK# BB521, 3910 HRS, AZ ..............................$135,001 (2) 2007 CAT 328D, 3026-3904 HRS, AZ, CA ................$229,750-$240,000 2002 CAT 330CL, STK# BB420, 8456 HRS, CA ..............................$107,000 (4) 2003 CAT 330CL, 7077-8094 HRS, CA ....................$108,500-$164,000 (2) 2006 CAT 330DL, 5218-6028 HRS, CA ....................$184,000-$186,000 2005 CAT 345CL, STK# BB608, 5914 HRS, CA ..............................$203,000 (3) 2006 CAT 345CL, 5335-8001 HRS, CA, TX ..............$185,000-$208,500 2002 CAT 365BL, STK# BB534, 9382 HRS, CA ..............................$200,000 (2) 2009 HITACHI ZX27U, 21-81 HRS, MN, ND ................$39,000-$39,615 2006 HITACHI 200CLC, STK# X285340, 7847 HRS, ND ..................$82,500 2010 HITACHI 240LC-3, STK# X328792, 991 HRS, TX ..................$225,000 2005 JCB 8032, STK# X334493, 728 HRS, CA ................................$18,500 2004 JOHN DEERE 27C, STK# X333832, 2572 HRS, CA ..................$16,000 2007 JOHN DEERE 35D, STK# X319838, 1906 HRS, TX ..................$29,000 2005 JOHN DEERE 50D, STK# X134351, 2302 HRS, AZ ..................$35,000 2006 JOHN DEERE 50D, STK# X317116, 2028 HRS, MT ................$47,835 2005 JOHN DEERE 800C, STK# X316494, 5220 HRS, AZ ..............$265,000 2007 JOHN DEERE 200D, STK# X320790, 5121 HRS, MN ............$124,890 2008 JOHN DEERE 200D LC, STK# X328480, 2647 HRS, ND ........$126,000 2007 JOHN DEERE 225DLC, STK# BB602, 2954 HRS, CA ............$149,001 2004 JOHN DEERE 230CLC, STK# X344083, 5927 HRS, MN ..........$85,000 2007 JOHN DEERE 240D, STK# X330051, 4609 HRS, TX ..............$125,000 2007 JOHN DEERE 240DLC, STK# X346462, 4745 HRS, ND ........$139,500 2009 JOHN DEERE 240DLC, STK# X275665, 2048 HRS, TX..........$189,000 (2) 2007 JOHN DEERE 270D, 2997-3817 HRS, ND ......$189,900-$210,000 (2) 2007 JOHN DEERE 270DLC, 3727-3757 HRS, MT, ND$142,535-$217,790 2008 JOHN DEERE 350D, STK# X341546, 3394 HRS, TX ..............$198,850 2007 JOHN DEERE 350DLC, STK# X225936, 4773 HRS, MN ........$171,250 2010 JOHN DEERE 350DLC, STK# X324760, 1569 HRS, MT ........$264,965 2007 JOHN DEERE 450DLC, STK# X295753, 4583 HRS, MN ........$265,155 (2) 2010 JOHN DEERE 450DLC, 1595-1731 HRS, MT, TX$337,500-$340,000 2007 JOHN DEERE 210CW, STK# X251915, 5167 HRS, CA ..........$139,800 1993 JOHN DEERE 595D, STK# X347096, 13456 HRS, AZ ..............$12,500 2004 KOBELCO SK70SR-1E, STK# X329581, 5155 HRS, MN ..........$37,000 2000 KOMATSU PC220LC-6 EX, STK# X340746, 12223 HRS, MN ..$43,500 2003 VERMEER CX224, STK# X343075, 1683 HRS, ND ..................$17,000

CRAWLER DOZERS 1998 CAT D8R, STK# BB491, 16434 HRS, CA ................................$185,000 1999 CAT D8R, STK# BB487, 4133 HRS, AZ ..................................$180,000 2005 CAT D8T, STK# BB550, 6052 HRS, CA ..................................$367,434 2006 CAT D8T, STK# BB610, 6190 HRS, CA ..................................$375,000 1997 CAT D9R, STK# BB373, 6863 HRS, CA ..................................$210,000 2005 CAT D9T, STK# BB558, 8485 HRS, CA ..................................$475,000 2008 CAT D6N XL, STK# X346574, 4646 HRS, TX ........................$168,000 (2) 2007 CAT D6T, 3249-5289 HRS, CA ..................................$300,000 Ea. 2008 JOHN DEERE 550J, STK# X129141, 1269 HRS, AZ ..............$141,436 1995 JOHN DEERE 650G, STK# X336437, 6303 HRS, MN ..............$32,000 (2) 2007 JOHN DEERE 650J, 2574-3235 HRS, ND, TX......$80,000-$94,000 2002 JOHN DEERE 700H, STK# X345112, 6006 HRS, MN ..............$64,000 (3) 2006 JOHN DEERE 700J, 1-5509 HRS, AZ, ND, TX ..$95,000-$140,000 2008 JOHN DEERE 700J, STK# X302200, 1911 HRS, MN ............$149,000 2007 JOHN DEERE 700J LGP, STK# X315894, 4232 HRS, SD ......$129,000 1988 JOHN DEERE 750B, STK# X241128, 0 HRS, MN ....................$17,000 2005 JOHN DEERE 750J, STK# X319014, 4527 HRS, MN ............$120,000 2006 JOHN DEERE 750J, STK# X258041, 3919 HRS, ND ..............$150,000 2007 JOHN DEERE 750J, STK# X300652, 5721 HRS, MN ............$129,900 2010 JOHN DEERE 764X, STK# X306707, 732 HRS, MN ..............$278,900 1995 JOHN DEERE 850C, STK# X292684, 10313 HRS, MN ............$47,000 2006 JOHN DEERE 850J, STK# X312035, 3742 HRS, ND ..............$225,000 2007 JOHN DEERE 850J, STK# X316024, 3831 HRS, ND ..............$195,000 (2) 2008 JOHN DEERE 850J, 1865-2855 HRS, ND, TX..$240,000-$289,000 2005 JOHN DEERE 850J LGP, STK# X315715, 5026 HRS, MN ......$197,500 2006 JOHN DEERE 850J LT, STK# X324821, 5114 HRS, MT ........$189,000 2008 JOHN DEERE 1050J, STK# X242153, 2623 HRS, ND ............$415,000 2001 KOMATSU D87E-2SL, STK# X337660, 3367 HRS, ND ............$73,000

MOTOR GRADERS 2000 CAT 140H VHP, STK# X345449, 7834 HRS, CA ....................$145,000 1995 CAT 163H, STK# X343832, 9143 HRS, MN............................$100,000 JOHN DEERE 670, STK# X346866, 5195 HRS, AZ............................$26,000 1992 JOHN DEERE 770BH, STK# X339879, 4010 HRS, ND ............$47,500 2000 JOHN DEERE 772CH, STK# X346194, 9000 HRS, ND ............$89,000 2008 JOHN DEERE 772D, STK# X325559, 3988 HRS, CA..............$206,300 2005 JOHN DEERE 872D, STK# X322740, 10234 HRS, SD............$160,000 $300,000 2009 JOHN DEERE 872G, STK# X346561, 3206 HRS, MN ..............$300,00

SKID STEERS 2004 BOBCAT S185, STK# X311675, 3583 HRS, MN ......................$15,300 2002 BOBCAT S250, STK# X310333, 1949 HRS, AZ ........................$20,500 2006 JOHN DEERE 317, STK# X273469, 510 HRS, ND....................$22,405 2007 JOHN DEERE 317, STK# X346521, 1805 HRS, ND..................$20,000 2005 JOHN DEERE 320, STK# X308071, 1599 HRS, CA ..................$20,250 2007 JOHN DEERE 325, STK# X251518, 2989 HRS, MN ................$25,815 2005 JOHN DEERE 332, STK# X247418, 2297 HRS, SD ..................$23,500 1997 JOHN DEERE 8875, STK# X297437, 343 HRS, TX ..................$10,500 2011 JOHN DEERE 320D, STK# X340718, 102 HRS, ND ................$39,200 2010 JOHN DEERE 328D, STK# X347355, 1130 HRS, SD................$39,000 2009 JOHN DEERE CT322, STK# X241421, 1090 HRS, MN ............$28,200 2008 KOMATSU CK35, STK# X317663, 435 HRS, SD ......................$29,000 2010 NEW HOLLAND L190, STK# X339851, 693 HRS, SD ..............$36,000 2009 NEW HOLLAND C185, STK# X320377, 1085 HRS, MN ..........$45,900

WHEEL LOADERS 1995 CAT 928F, STK# X286805, 1535 HRS, MN ..............................$37,800 2001 CAT 928G, STK# X325628, 23523 HRS, MN............................$38,900 2006 CAT 950H, STK# X298776, 3914 HRS, CA ............................$185,000 (2) 2007 CAT 950H, 1400-6403 HRS, CA ......................$195,000-$220,000 2006 CAT 972H, STK# BB564, 5459 HRS, CA ................................$229,500 1975 CMI (TEREX) 7231A, STK# X320222, 1 HRS, MN ..................$11,500 1980 FORD A62, STK# X321606, 6116 HRS, ND ............................$15,000 1990 JOHN DEERE 2004, STK# V9071, 5760 HRS, CA ....................$80,000 2006 JOHN DEERE 444J, STK# X340941, 9333 HRS, SD ................$70,000 2010 JOHN DEERE 444K, STK# X283425, 972 HRS, ND................$127,800 2011 JOHN DEERE 444K, STK# X309863, 557 HRS, TX ................$140,000 2009 JOHN DEERE 524K, STK# X273702, 4219 HRS, ND..............$125,000 2011 JOHN DEERE 524K, STK# X343704, 2320 HRS, MN ............$137,000 1981 JOHN DEERE 544C, STK# X339079, 653 HRS, SD..................$24,000 1989 JOHN DEERE 544E, STK# X345832, 10961 HRS, ND..............$39,000 JOHN DEERE 544E, STK# X345973, 19850 HRS, TX........................$26,000 1994 JOHN DEERE 544G, STK# X345223, 12177 HRS, ND ............$50,000 1998 JOHN DEERE 544H, STK# X346647, 10538 HRS, AZ ..............$42,000 2005 JOHN DEERE 544J, STK# X282505, 5147 HRS, MT..............$106,900 (3) 2006 JOHN DEERE 544J, 4468-19,141 HRS, AZ, ND $44,500-$102,000 1993 JOHN DEERE 624G, STK# X340140, 12716 HRS, MN ............$47,000 (2) 2005 JOHN DEERE 624J, 4658-12,397 HRS, AZ........$63,000-$104,500 (2) 2006 JOHN DEERE 624J, 3061-5163 HRS, AZ, MN ..$95,000-$150,129 (2) 2007 JOHN DEERE 624J, 6001-17,748 HRS, AZ........$69,500-$110,000 1975 JOHN DEERE 644B, STK# X274819, 8104 HRS, MN ..............$13,500 1994 JOHN DEERE 644G, STK# X319537, 18587 HRS, MT ............$40,000 2006 JOHN DEERE 644J, STK# 581754, 1912 HRS, AZ ................$182,960 2008 JOHN DEERE 644J, STK# X295754, 1318 HRS, MT..............$219,000 2003 JOHN DEERE 724J, STK# X312504, 6328 HRS, SD ..............$129,000 2006 JOHN DEERE 744J, STK# X315459, 14752 HRS, TX ............$135,000 2005 JOHN DEERE 824J, STK# X275916, 9204 HRS, ND ..............$144,075 2006 JOHN DEERE 844J, STK# X312895, 8147 HRS, ND ..............$209,000 2007 JOHN DEERE 844J, STK# X087173, 4740 HRS, ND ..............$395,000 2008 JOHN DEERE 844J, STK# X302350, 7856 HRS, MT..............$259,000

Online Auctions at: www.RDOAuctions.com

www.rdousedequipment.com 61 Locations in 9 States - HQ in Fargo, ND

Bob Schmidt • 972-554-2139

Sam Leeper • 619-873-1406

bschmidt@rdoequipment.com (TX)

sleeper@rdoequipment.com (AZ/CA)

Jeff Hawks • 952-882-2712

Paul Sears • 951-778-3704

jhawks@rdoequipment.com (MN/MT/ND/SD)

psears@rdoequipment.com (Int’l)

Follow us on

RDOUsed_Constr


Page 54 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

ge 52 CHART from pa

CASE MODEL CX75 CX130B CX135MSR CX210B CX225MSR CX290B CX250C CX800B

KOMATSU MODEL PC09-1 PC200LC-8 HB215LC-1 (Hybrid) PC360LC-10 PC490LC-10 Var. Gauge PC800LC-8 PC800LC-8 Super Digger PC4000 Front Shovel PC8000 Backhoe

LIUGONG MODEL 904C 906C 908C 915D 925D 936D

JCB MODEL JS 145 JS 190 JS 220XD JS 260 JS 260XD JS 330 JS 330XD JZ 140 JZ 235

ENGINE HP (KW) 54 (40) 95 (71) 95 (71) 157 (117) 153 (114.4) 207 (154) 177 (132.1) 532 (397)

ENGINE HP (KW) 8.7 (6.5) 148 (110) 139 (104) 257 (192) 359 (268) 487 (363) 487 (363) 1,875 (1,400) 4,020 (3,000)

ENGINE HP (KW) 36.3 (27.1) 49 (36.2) 76 (56.6) 110 (82) 190 (142) 280 (209)

ENGINE HP (KW) 94 (700) 166 (123.7) 172 (128.2) 197 (146.8) 197 (146.8) 271 (202) 271 (202) 98 (00) 172 (128.2)

OPERATING WEIGHT LBS. (KG)

DIGGING DEPTH FT. (M) 14.9 (4.54) 19.8 (6.05) 19.4 (5.91) 21.8 (6.64) 22.0 (6.70) 24.9 (7.58) 21.9 (6.68) 35.0 (10.66)

17,468 (7,919) 27,800 (12,610) 29,631 (13,440) 47,400 (21,500) 53,223 (24,141) 65,697 (29,800) 55,400 (25,100) 178,575 (81,000)

OPERATING WEIGHT LBS. (KG)

DIGGING DEPTH FT. (M) 4.9 (1.5) 21.8 (6.63) 21.8 (6.63) 24.3 (7.41) 25.4 (7.74) 28.3 (8.61) 28.3 (8.61) 9.2 (2.80) 27.6 (8.41)

1,985 (900) 51,815 (23,503) 48,175 (21,852) 79,093 (35,876) 108,170 (49,065) 188,670 (85,579) 188,670 (85,579) 850,000 (385,553) 1,565,000 (710,000)

OPERATING WEIGHT LBS. (KG)

DIGGING DEPTH FT. (M) 10.2 (3.1) 19.8 (6.0) 13.7 (4.1) 19.3 (5.9) 23.0 (7) 24.0 (7.34)

8,818 (4,000) 13,228 (6,000) 16,976 (7,700) 33,069 (15,000) 58,400 (26,500) 81,600 (37,000)

DIGGING DEPTH FT. (M)

OPERATING WEIGHT LBS. (KG)

19.8 (6) 19.8 (6.0) 21.7 (6.6) 23.7 (7.2) 23.7 (7.2) 26.9 (8.2) 26.9 (8.2) 19.8 (6) 21.7 (6.6)

33,510 (15,200) 44,099 (20,003) 50,858 (23,069) 58,090 (26,349) 63,383 (28,750) 73,700 (33,430) 72,532 (32,900) 32,290 (14,646) 49,590 (22,494)

OM

UIDE.C UCTIONEQUIPMENTG TR NS CO W. WW T SI ALSO VI T LISTINGS. FOR ALL EQUIPMEN tact all the tion Equipment Guide to con Despite efforts by Construc chart. this in ear s, not all of them app manufacturers of excavator

DIGGING REACH FT. (M) 25.0 (7.62) 29.7 (9.05) 31.3 (9.52) 31.7 (9.65) 35.8 (10.91) 34.0 (10.39) 34.8 (10.62) 46.9 (14.30)

DIGGING REACH FT. (M) 9.9 (2.76) 31.8 (9.7) 31.8 (9.7) 35.8 (10.91) 38.8 (11.82) 44.2 (13.46) 44.2 (13.46) 49.9 (15.21) 65.3 (19.90)

DIGGING REACH FT. (M) 17 (5.2) 19.7 (6.0) 20.4 (6.2) 28.2 (8.6) 34.0 (10.4) 35.8 (10.9)

DIGGING REACH FT. (M) 26.9 (8.2) 29.8 (9.1) 31.8 (9.7) 32.8 (10) 32.8 (10) 35.9 (11) 35.9 (11) 26.9 (8.2) 31.8 (9.7)


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 55

Cash is king – Make more money & spend less with Hyundai 9 Series machines.

VALUE

• More Standard Features • Industry-Best Total Coverage Warranty • Hi-mate Remote Management service – FREE for 3 years • Industry-Leading Fuel Economy

ILLINOIS

Burris Equipment Company Frankfurt • 815-464-6650 Ingleside • 815-363-4100 Waukegan • 847-336-1205 Diamond Equipment 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273 800-388-6396 Fax: 618-242-9161

2000 Harlan Drive Terry Haute, IN 47802 812-299-4747 888-343-4747 Fax: 812-299-3687

NDA

Y

T

A

R R A N

KANSAS

INDIANA Diamond Equipment 1060 Diamond Ave. Evansville, IN 47711 812-425-4428 dmfortune @diamondequipment.com www.diamondequipment.com

W

3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

YU

I

Industry’s Best Total Coverage Warranty:

H

• Industry-Leading Cycle Times

Hardings Heavy Equipment 109 W. Commercial Ave. Lowell, IN 46356 219-696-8911 www.hardingsinc.com info@hardingsinc.com

The Victor L. Phillips Co. 4100 Gardner Ave. Kansas City, MO 64120 816-241-9290 Garden City • 620-275-1996 Topeka • 785-267-4345 Wichita • 316-838-3346

KENTUCKY

Diamond Equipment 1046 Lovers Lane Bowling Green, KY 42103 270-781-1061 800-489-1061 Fax: 270-781-0907

www.hyundaiamericas.com

MICHIGAN

Midland Engine Midland • 989-631-4608

MINNESOTA

Titan Machinery Hermantown • 218-727-3038 Shakopee • 952-445-5400

MISSOURI

The Victor L. Phillips Co. 4100 Gardner Ave. Kansas City, MO 64120 816-241-9290 Brookline Station • 417-887-2729 Joplin • 417-781-8222

WISCONSIN

Titan Machinery La Crosse • 608-788-1025


Page 56 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

CONTINENTAL EQUIPMENT CORP. A division of AIS www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax South Bend, IN 574/233-8770 574/233-8775 Fax

STRIKER HYDRAULIC BREAKERS A PREMIER HYDRAULIC BREAKER MANUFACTURER FOR OVER 33 YEARS

3 Year Warranty - 2 Moving Parts - No Accumulators 100-12,000 Ft/Lb Product Range

Call: 877-954-9923 FOR DETAILS ON FREE DEMO!

The Original MFG TB-Series & VZ-Series Breakers Formerly distributed by Teledyne & BTI

Always ask for Genuine TOKU “OEM” Parts

3900 Ben Hur Avenue, Willoughby, Ohio 44094

www.toku-america.com

www.smallstep.gov

ROAD MACHINERY & SUPPLIES COMPANY www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8671 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 218/741-9011 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114 Fremont, CA 510-659-1903

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Trafficway Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620


Construction Equipment Guide â&#x20AC;¢ Excavators & Attachments Section â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ February 18, 2012 â&#x20AC;¢ Page 57

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0526 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 W Main Ave Fargo ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND 58072 800/825-0479 2300 Vermont Avenue Bismarck ND 58504 800/279-4437

HYBRID EXCAVATOR From Komatsu - The Green Experts

,PNBUTVDPOUJOVFTUPTUSFOHUIFOJUTJOOPWBUJPOMFBEFSTIJQXJUIUIF)#-$          ,PNBUTVIZCSJEFYDBWBUPSTIBWFBDDVNVMBUFENPSFUIBOPOFNJMMJPOPQFSBUJOH          IPVSTJOUIFmFME QSPWJOHUIFJSSFMJBCJMJUZBMPOHXJUIGVFMBOEFNJTTJPOTTBWJOHT             t8JUIFWFSZTXJOH UIF)#-$SFHFOFSBUFTFOFSHZoZJFMEJOHBOBWFSBHFGVFM             TBWJOHTPGXJUIBOFRVJWBMFOUGFXFS$0          FNJTTJPOT t)ZCSJE   QPXFS USBJO DPNQPOFOUT BSF CBDLFE CZ B  ZFBS   IPVS XBSSBOUZ

www.komatsuamerica.com www .komatsuamerica.com


Page 58 • February 18, 2012 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide

*

B & W Equipment Company, Inc. 3520 Meyer Road Fort Wayne, IN 46806 800-242-4819 www.bandwequipment.com

Pat Kelly Equipment Company

5920 N. Lindbergh Blvd Hazelwood, MO 63042 Construction Machinery Company 314-895-9500 2911 S. English Station Rd. Louisville, KY 40299 www.patkelly.com 502-267-4020 www.cmcky.com

2235 Ragu Drive Owensboro, KY 42303 270-683-2000 www.cmcky.com

Steve's Equipment Service, Inc. 1400 Powis Rd.

Newman Equipment, Inc. West Chicago, IL 60185 1315 Terminal Rd Indianapolis, IN 46217 630-231-4840 317-781-8100 www.newmanequip.com

6915 West Chicago Ave. Gary, IN 46406 Pat Kelly Equipment Company 219-949-9595 5920 N. Lindbergh Blvd. www.sesequip.com Hazelwood, MO 63042 314-895-9500 www.patkelly.com

Steve’s Equipment Service, Inc 1400 Powis Road West Chicago, IL 60185 630-231-4840 www.sesequip.com 12770 W. Silver Spring

Kelbe Brothers Equipment Co., Inc.

Dr.

Butler, WIChicago 53007 6915 West Ave Gary, IN 46406 262/373-2151 219-949-9595 Fax: 262/373-2102 www.sesequip.com 4621 Dutch Mill Rd. Madison, WI 53716 Swiderski Equipment, Inc. – Since 1925 Mosinee, WI • 715-693-3015 608/221-8300 Wausau, WI • 715-675-2391 Fax: Thorp,608/221-0610 WI • 715-669-5255 Antigo, WI • 715-623-4668 www.kelbebros.com Waupaca, WI • 715-258-3266 Appleton, WI • 920-757-9363


Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 18, 2012 • Page 59


Page 60 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AGC Survey: Construction Firms Plan to Make Fewer Layoffs in 2012

Authorized Bobcat Dealers

ILLINOIS Bobcat of Springfield Springfield

Significantly fewer construction firms are planning to make layoffs in 2012 than at any point in the past few years according to survey results released Jan. 23 by the Associated General Contractors of America and Computer Guidance Corporation. The survey, conducted as part of the 2012 Construction Industry Hiring and Business Outlook, shows many firms expect key private sector market segments to expand this year even as the overall outlook remains mixed. “While there are some promising signs, especially when it comes to construction employment, the outlook for the industry is mixed,” said Stephen E. Sandherr, the association’s chief executive officer. “More than four years after demand for commercial construction began to plummet, economic conditions remain difficult.” Sandherr noted that far fewer firms are planning on making layoffs this year, only nine percent in 2012 compared with 37 percent last year and 55 percent in 2010. He added that 32 percent of firms report they plan to add new staff in 2012. Even more positive, half of those firms report plans to add six or more new employees during the next 12 months. Among the 29 states with large enough survey sample sizes, 57 percent of firms in Wisconsin plan to hire new staff this year, more than in any other state. Only 16 percent of firms in Virginia plan to add staff this year, the least amount in any state. Meanwhile, 18 percent of firms in Missouri plan layoffs for this year, the highest percentage of any state. No firms working in South Carolina reported plans to make layoffs this year. A majority of firms expect the dollar volume of projects they compete for to either grow or remain stable in every market segment. In particular, roughly three-fourths of contractors expect the power and the hospital and higher education markets to expand or remain stable this year. In contrast, contractors working on a number of market segments typically funded by the public sector are more pessimistic. Fortyfour percent of contractors expect the market for new public buildings to shrink, 41 percent expect the market for K-12 school construction to shrink and 40 percent expect the highway market to contract. In addition, many contractors report they continue to be impacted by tight credit conditions. Nearly half — 49 percent — of responding firms report that tighter lending conditions have forced their customers to delay or cancel construction projects. Perhaps related to the tough credit environment, 60 percent of firms expect demand for green construction projects to either stagnate or decline in 2012. “There are definitely some conflicting trends when it comes to contractors’ expectations for 2012,” said Ken Simonson, the association's chief economist. “The construction industry will improve this year but we are going to have to wait until at least 2013 before contractors experience the kind of recovery this industry needs.” Simonson added that contractors appear cautious with their plans for acquiring new construction equipment. Many more firms report plans to lease, instead of purchase, new equipment. Only 40 percent of firms report they plan to buy new equipment this year, while 66 percent plan to lease. Even as they shift toward more leasing, firms’ appetite for new equipment remains modest, with 57 percent saying they will buy $250,000 or less in equipment and 70 percent say-

ing they will lease $250,000 or less worth of equipment this year. Contractors also report being caught between stagnant bid levels and rising materials prices. Eighty-six percent of firms report they expect their materials prices to increase in 2012, even as 80 percent say they expect bid levels to stagnate or decline this year. Adding to the cost squeeze, 81 percent reported their health care costs went up in 2011 and 82 percent expect their health care costs to increase in 2012. A growing number of firms appear to be focused on increasing efficiency and reducing costs by taking advantage of Building Information Modeling services, also known as BIM, association officials noted. Thirty-one percent of firms report they currently use the technology, up from just eight percent from last year. And 47 percent report they expect the use of BIM to increase in 2012. “As a result of the tight market conditions, firms are try-

217-525-0349 bobcatofspringfield.com

KANSAS White Star Machinery Wichita   s  

Manhattan 785-537-9979

Topeka 785-232-7731

Garden City 620-277-2290 whitestarmachinery.com

MICHIGAN Carleton Equipment Company Livonia

“While there are some promising signs, especially when it comes to construction employment, the outlook for the industry is mixed.”

734-421-9999

Kalamazoo 269-343-2943

Saginaw 989-777-6666

Byron Center 616-877-3388 carletonequipment.com

MINNESOTA Bobcat of Rochester Stewartville

Stephen E. Sandherr AGC

  s   bobcatofrochester.com

Farm Rite Equipment, Inc. Dassel

ing to find the best way to leverage their investments in new information technology,” said Roger Kirk, Computer Guidance’s president and CEO. “Contractors are looking for software and technology that increases the efficiency of existing staff and allows firms to do more with fewer people.” Kirk noted that 55 percent of firms report they plan to invest in their information technology departments in 2012. He added, however, that companies looking to invest in replacing older software are looking at ways to avoid largescale up front investments. For example, while only nine percent of firms reported plans to purchase new software, onethird of firms report they would consider leasing or financing new software. Interest in Cloud-based computing appears to be growing among construction firms, Kirk noted. The outlook, which the association co-sponsored with Computer Guidance, was based on survey results from over 1,300 construction firms from 50 states, the District of Columbia and Puerto Rico. Contractors from every segment of the industry answered over 30 questions about their hiring, equipment purchasing and business plans. Economists and specialists from the association and Computer Guidance analyzed those comments to craft the outlook.

  s   farmriteequip.com

Lano Equipment, Inc. Shakopee   s  

Ramsey   s  

Corcoran   s   lanoequip.com

Norwood Young America 952-467-2181 lanoequipofnorwood.com

OHIO Bobcat of Dayton Dayton   s "/"#!43

Troy   s "/"#!43 bobcatofdayton.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 61

BETTER RIDE. TOUGHER HIDE. You can have comfort without compromising durability. Bobcat® Roller Suspension™ provides a more comfortable ride by suspending the track rollers on tough, steel leaf springs. The system conforms to the terrain and absorbs bumps and vibrations at the ground where they start. Our all-steel construction stands up to extreme heat, harsh cold and contact with coarse materials – maximizing your uptime and reducing costly repairs. Visit your local Bobcat dealer for more information.

“Bobcat” is a registered trademark of Bobcat Company. | 0112392


Page 62 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Optimism, Positivity Highlight World of Concrete 2012 CONCRETE from page 16

Steve Lotz (L) of John Deere explains the John Deere compact track loader with a Worksite Pro CP 18C cold planer to Tom Maeda of Equipmentwatch, San Jose, Calif.

(L-R): Randy Reeves of Xtreme Manufacturing points out the attributes of the XR 3034 lift to Rich Toms and Randy Patterson of Structures Inc., Englewood, Colo.

(L-R): Mark Betz, Ditch Witch, shows Eric Inberg and Cefus Wood of ERI Engineering & Construction, Riverton, Wyo., the XT 855 excavator and tool carrier.

attend. The Concrete Construction Challenge featured entertaining events that combined precision, speed and focus, including Pervious Concrete LIVE! During the Concrete Polishing & Staining Luncheon & Forum, experts in the concrete polishing industry gathered to discuss what contractors need to know to help grow business while emphasizing the importance of concrete polishing specifications. Other events featured were The Concrete Producer’s Challenge, including the popular John Deere Operator’s Challenge and the Western Star Serious Trucks Challenge. The 10th annual SPEC MIX BRICKLAYER 500 National bricklaying championship was held on Jan. 25, at the World of Concrete. The 60-minute bricklaying competition featured the best bricklayers in the world traveling from the United (L-R): Rich Steinbrenner of Allied has been discussing hydraulic hammers with Jay Crawford, Crawford States, Canada, Great Britain and even Australia to test their Construction, Olathe, Kan., and John Czinczoii of Gray levels of skill, speed and stamina. The popular event posiMatter Concrete Design, Fairfax, Calif. tioned 21, two-person teams made up of a mason and mason tender who competed to lay the most brick while meeting strict quality standards. Leif Reints of Reints Masonry Works in Neosho, Mo., won first place after laying 583 bricks in one hour and took home a new Ford F-250 4x4 truck, $5,000 cash and sponsor prizes worth thousands of dollars. SAIA’s Safety Boot Camp contestants performed a visual inspection of various types of scaffolding. These inspections simulated actual jobsite conditions that could be encountered on masonry construction jobsites. MCAA (Masonry Contractors Association of America) held its Annual Convention at WOC. In addition to several educational sessions, MCAA featured two events; the International Masonry Skills Challenge and the Fastest Trowel on the Block Competition. World of Concrete also provided attendees an Education Program sponsored by White Cap Construction Supply with expert-led seminars, packed with leading-edge advice on Business is buzzing at the 2012 World of Concrete! how to reduce costs, improve profits and save time.

Gino DiBenedetto (L) of Case points out the attributes of the Case SR250 skid steer with a six-way blade to Thierry Basque of Basque Construction, New Brunswick, Canada.

(L-R): Zachary and Jeff Falk of Falk Concrete Construction LLC, Richland Center, Wisc., speak with Scott Cooper of Caterpillar about the 304E mini-excavator.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 63

www w.jcbvision.com

SHOW ORDINARY SKID STEERS THE DOOR

BEST IN

BEST IN

BEST IN

BEST IN

BEST IN

SAFETY

VISIBILITY

COMFORT

EFFICIENCY

SERVICEABILITY

Industry’s only side door entry

60% better than competition

33% larger cab

Up to $3,000 in annual fuel savings

24% better SAE s

Nobody rivals our vision JCB has alwayys been a visionary company, from the invention of the backhoe loader, to the only skid steer with a side door. Now, we’ve redesigned our skid steer from the ground up. We’ve given it greater visibility, increased accessibility and made it more comfortable – all without saccrificing safety. Step in our industry ’s only side door and you’ll learn why this is no ordinaryy skid steer. For more information visit www.jcbvision.com

become a fan at www.facebook.com/jcb or visit our blog: www.jcbdirt.com

LO C AT I O N S JCB of Chicago 1603 East Algonquin Rd Arlington Heights, IL 60005 847-437-8686 Fax: 847-437-8738

Diesel Machinery Inc. 4301 N. Cliff Ave. Sioux Falls, SD 57104 605-336-0411 Fax: 605-336-9503

16754 New Ave Lemont, IL 60439 630-257-1261 Fax: 630-257-0614

Rapid City, SD 57702 605-348-7438

1548 Huntwood Dr Cherry Valley, IL 61016 815-332-8222 Fax: 815-332-3056 www.casey-equipment.com

Aberdeen, SD 605-725-4364

JCB of Milwaukee 12011 W. Silver Spring Drive Milwaukee, WI 53225 262-783-7510

Sievers Equipment 406 Old Rt. 66 • Hamel, IL 62046 618-633-2622 8080 State Rt. 16 • Hillsboro, IL 62049 217-532-3222 State Rd. 267 South Greenfield, IL 62044 217-368-2486 14464 Shad Rd. • Carlinville, IL 62626 217-854-3191 1351 West Jackson St. • Auburn, IL 62615 217-438-6111

MH JCB 106 Circle Freeway Drive Cincinnati, OH 45246 (Ph) 513-681-2200 (Fax) 513-681-1235 3306 Gilmore Industrial Blvd. Louisville, KY 502-962-6560 Fax: 502-810-9306 5859 Raymond St. Indianapolis, IN 46241 317-240-6300 www.mhjcb.com


Page 64 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

, e c a p s l l a m S the

Custom Truck & Equipment 7701 Highway 24 Kansas City, MO 64125 800/861-1065 www.cte-equipment.com

Howell Tractor Company Peru, IL 800/342-6072 Gary, IN 800/852-8816

Holt Equipment Louisville, KY 800/507-9705 Bowling Green, KY 270/842-3400 London, KY 877/231-7151 Lexington, KY 800/463-8722

The Gehl 1640E Skid Loader was designed with quality in mind. There are few tasks this loader cannot handle. ‡ Rated capacity of 850 pounds and lift height up to 96 inches

BIG JOB

‡ Super-compact 36-inch width with 5.70 x 12 tire option, or 42-inches with 8.50 x 12 KHDY\GXW\ÀRWDWLRQWLUHRSWLRQ ‡ Power-view® lift arm provides strength, durability and excellent view of the tires and sides of the loader ‡ Universal quick-attach system speeds attachment changes ‡ SAHR (spring-applied, hydraulic-release) brake system responds quickly, holding the loader on any grade

Elder Ag and Turf East Palestine, OH 330/426-2166

Dealer Imprint gehl.com

expert


CONSTRUCTIONEQUIPMENTGUIDE•www.constructionequipmentguide.com• February18,2012•Page65

The Difference is in the D-tails. You asked. We delivered. Our D-Series Skid Steers are loaded with customer-recommended enhancements, like larger operator stations, quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options such as electrohydraulic joysticks, variable boom and bucket speed settings, and more than 100 attachments to let you take on more tasks. Packed full of best-in-class productivity and uptime-enhancing features, the D-Series are destined to become owner and operator favorites. Ask for a demo today.

www.johndeere.com

www.erb equipment.com Fenton, MO 63026 636/349-0200 Cape Girardeau, MO 63703 573/334-0563 Foristell, MO 63348 636/673-2131 Cuba, MO 65453 573/885-0500 Mt. Vernon, IL 62864 618/244-6800 Paducah, KY 270/554-1131 Owensboro, KY 270/684-2339 Evansville, IN 812/473-0484

www.lec1.com 8331 Meade Springer Rd. Ashland, KY 41102 606/928-3477 195 Sykes Blvd. Pikeville, KY 41502 606/432-0321 105 Tennis Center Dr. Marrietta, OH 45750 740/373-5255

www.westside tractorsales.com 1400 W. Ogden Ave Naperville, IL 60563 630/355-7150 Fax: 630/355-7173 South Holland, IL 708/331-6362 Rockdale, IL 815/730-9011 Wauconda, IL 847/526-7700 Rockford, IL 815/961-3160

www.murphytractor.com Sioux City, IA 800/352-4693 Waterloo, IA 800/772-2019 Dodge City, KS 800/794-0172 Great Bend, KS 800/264-4056 Topeka, KS 800/279-6087 Ulysses, KS 800/472-9238 Park CIty, KS 800/262-0139 Kansas City, MO 888/306-3434 Springfield, MO 888/306-2656

Gering, NE 800/205-6784 Grand Island, NE 800/868-4017 Lincoln, NE 800/416-5518 North Platte, NE 800/894-7060 Omaha, NE 800/416-5095 Brunswick, OH 800/716-9796 Canton, OH 866/235-0438 Cincinnati, OH 800/844-3734

Columbus, OH 800/222-2010 Lima, OH 800/423-7445 Poland, OH 866/503-7259 Vandalia, OH 800/233-4228 Cambridge, OH 740/439-2747 Chillicothe, OH 740/663-5300 Cranberry Twp, PA 724/776-3636 Delmont, PA 724/837-4500


Page 66 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 67

HAUG-KUBOTA, LLC. www.haugkubota.com East Highway 12 3585E. Hwy 12 Willmar, MN 56201 320/235-2717 Fax: 320/235-2771

Now available with a pressurized comfort cab. Schedule your Kubota SVL Series demo today.

ARNOLD’S OF KIMBALL www.arnoldsinc.com 701 State Hwy 55 E Kimball, MN 55353 320/398-3800 Fax: 320/398-6900

ARNOLD’S OF MANKATO www.arnoldsinc.com 1715 Howard Drive No. Mankato, MN 56003 507/387-5515 Fax: 507/387-6449

LANO EQUIPMENT INC. www.lanoequip.com 6140 Highway 10 Anoka, MN 55303 888/448-5266

3021 133rd St. SW Shakopee, MN 877/753-6100

23580 Mn-5 Loretto, MN 888/479-4342

NIEBUR TRACTOR & EQUIPMENT, INC. www.nieburtractor.com Hastings, MN 888/839-6860

www.kubota.com

Optional equipment may be shown. ©Kubota Tractor Corporation, 2010

BURRIS EQUIPMENT CO. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax: 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 10351 W. Laraway Rd. Frankfort, IL 60423 815/464-6650


Page 68 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bobcat Offers Extendable Arm Option on E32, E35 Models Bobcat has a new extendable arm option for the M-Series E32 and E35 compact excavators. The extendable arm is a telescoping arm that provides the best of both worlds — power and reach. The new extendable arm option provides an additional 30 in. (76 cm) of reach, beyond the standard arm, for both the E32 and E35 models. The new option also is the first extendable arm for compact excavators that allows the use of the hydraulic clamp and Hydraulic X-Change attachment mounting system.

style thumb switch located on the joystick. This allows for fast and simple movements for extending and retracting the arm. Less Repositioning Required The extendable arm’s benefits are appealing to those in landscaping, utility, municipalities and site preparation because it offers the compactness of a standard arm machine with the ability to extend when needed. Working in tight spaces and on established turf is possible without repositioning the machine. This equals valuable time saved and less re-work required, according to the manufacturer. In the case of digging utility trenches, the extendable arm ensures a long enough reach to move spoil away from the trench and out of the way, as well as reducing the risk of the trench falling back into itself because of the The new extendable arm option provides an additional 30 in. (76 cm) of reach, weight of the nearby spoil.

Ultimate Performance The new Bobcat extendable arm can be hydraulically extended and retracted as the need arises. When retracted, the arm delivers similar arm force (tear-out force) as a standard arm. Should the operator need to reach back into the trench to clean out material, or need to reach farther away from the excava- beyond the standard arm, for both the E32 and E35 models. tion to dump spoil, the arm can be extended an additional 30 in. Another appealing application for the a hydraulic clamp. The clamp capability is a perfect solution extendable arm is truck loading. The extendable arm allows for contractors wanting to pick up and place material such as the operator to reach to the front or to the far side of a truck rocks, landscaping materials and debris in site preparation applications. to safely fill the load. Clamp Capability The new extendable arm option also allows for the use of

Fingertip Operation The extendable arm cylinder is operated through a rocker

Attachment Versatility The extendable arm maintains the versatility of operating attachments. A retention pin holds the arm in the retracted position, allowing use of up to 16 different attachments. Bobcat’s extendable arm also accommodates the optional hydraulic X-Change mounting system, which allows for even faster attachment changes. For more information, visit www.bobcat.com.

With Minn. Budget in Precarious State, Funding Could Be Tough CAPITOL from page 1

major overhaul will do, the commission said. The building’s sprinkler system and emergency stair exits need updating. And the commission wants to improve public access to legislative offices and create more flexible meeting spaces. The money won’t come easily. Gov. Mark Dayton didn’t include any funds in his proposed bonding bill. Minnesota’s budget situation is precarious, and other construction projects with more vocal supporters are vying for attention — like the Minnesota Vikings’ bid for a new stadium. Senate Majority Leader David Senjem, RRochester, said the Capitol’s exterior needs repairing. Some of the other items don’t appear as necessary, he said. “It would be nice to have a larger meeting room, but at what price?” Senjem said. Rep. Dean Urdahl, a Grove City Republican who sits on the commission, is aware of the tough road ahead. He wants to spread the renovation over two or three bonding bills, and is hoping for bipartisan support. “We’re going to put significant money into this project, this year,” Urdahl said. Later, he added: “It’s a question of if we don’t do something, will we ever be able to

catch up?” Many states addressed expensive Capitol restorations during the 1980s and 1990s, according to the National Conference of State Legislatures. Minnesota is one of a handful that has relied on piecemeal fixes. In Colorado, a balcony once open to visitors was closed off to protect them from parts breaking off the Capitol’s cast-iron dome. Oklahoma’s statehouse saw large barricades sealing off the public from cascading chunks of limestone and mortar. Oregon put off changes to make its building less vulnerable to earthquakes, though experts believe a severe one could kill people inside. Much of the exterior of Minnesota’s Capitol is headed in the same crumbling direction of that marble chunk, according to the Minnesota State Capitol Preservation Commission. The structure, which features the second-largest stone dome in the world after St. Peter’s Basilica in the Vatican City, was erected in 1905 at the hand of architect Cass Gilbert. He also designed the United States Supreme Court building. Today, it’s one of only a few state Capitol buildings of its age that’s yet to undergo a large-scale renovation. Some say the need merits the $241 million price tag, even during a lean time. The issue is coming to a head

this year after a decade of planning and a century of small-scale quick fixes. If approved, the project is slated to start this year and could take five years to complete. According to the commission, the building has reached a “tipping point” at which certain upgrades changes must be made in one to two years or the building will be beyond preservation and instead demand constant upkeep or complete replacement. This would mean a loss of cultural and historic value unseen in other states, said Greg Donofrio, an assistant professor of architecture at the University of Minnesota. “The prominence and significance of Cass Gilbert as an architect is really pretty difficult to over-emphasize,” Donofrio said. “We have one of the first major works of a master architect right downtown in St. Paul.” Less comprehensive Capitol overhaul initiatives in the last decade were never fully implemented, and often didn’t reach consensus due to clashes over money and priorities. The necessary electrical, plumbing and mechanical updates reach a combined cost of about $43.1 million, said Wayne Waslaski, a director with the Department of Administration who’s working with the commission. He said they would be cheaper

and last longer when done alongside interior efficiency renovations. The exterior stone restoration would cost $17.6 million. “When you’re making those major system changes, you’re going to impact every room in the building,” Waslaski said. He added that historic lighting and paint work restoration in public spaces is needed, but could be done later. But Senjem said funding the project in a $241 million lump is “inconceivable.” He said Urdahl’s plan of funding over time might work, but that future legislatures can’t be committed to the project. Though the building contains health and safety risks, much of the restoration initiative will rely on public support for what many inside the Capitol refer to as “the people’s house.” Rich Polk of Eagan only came to the building once years ago, but recently returned while on a visit to St. Paul — one of the 120,000 people who annually tour the statehouse. “It’d be a shame if we as a state can’t maintain our Capitol,” Polk said. “They’ll do something. They can’t just knock this down.”


Paving

SECTION Bomag’s BM2000/60-2 Features Deutz Water-Cooled Engine Pages 69-79

Featuring a high horsepower-per-cutting-tooth ratio, the Bomag BM2000/60-2 cold planer milling machine is designed to remove damaged or deteriorated asphalt surfaces from highways, streets and parking lots. Easily transportable and delivering high production, the unit offers cutting widths of either 79 or 86 in. (200 or 218 cm) to remove a half lane of road surface in one pass. The BM2000/60-2 is equipped with 168 milling teeth and is powered by a Deutz water-cooled diesel engine. The milling machine features a 590-hp (440 kW) engine that delivers a horsepowerper-cutting-tooth ratio of 3.5 and efficient maximum working speed of 131.2 ft. (40 m) per minute. The unit is capable The Bomag BM2000/60-2 cold planer milling machine offers cutting widths of either 79 or 86 in. (200 or 218 cm) to remove a half of milling depths between 0 and 12.6 in. lane of road surface in one pass. (0 and 32 cm). The machine comes standard with coordinated, four-track machine functions. This system continuously informs the a large capacity 924-gal. (3,498 L) water tank and 317-gal. steering, providing added maneuverability in commercial operator of the machine’s working condition and can be used (1,200 L) fuel tank to allow longer periods of operation. Due applications and other tight job locations. The BM2000/60- to check the status of schedule maintenance requirements to a front-loading, hydraulically foldable discharge conveywith the press of a button. The machine also features high- or, the planer can easily be transported to and from the job2 has an inside turning radius of 7 ft. (2 m). For optimal consistency while working over changing capacity storage compartments for immediate access to wear site. For more information, call 800/782-6624, or visit grades and slopes, the milling depth can be controlled using parts, tools and personal equipment. Other standard equipment on the BM2000/60-2 includes www.gobomag.com/planers. the INTELPLANER automatic depth control system. INTELPLANER allows the operator to dial in the appropriate grade, and a microprocessor automatically cuts to the desired depth as it moves along the asphalt surface. An ergonomic workstation on the Wacker Neuson’s fourth annual Darin Wiebe, winner of BM2000/60-2 includes a completely Wacker Neuson’s 2012 trowel challenge competition held at vibration-insulated operator’s platform trowel challenge compethe World of Concrete in Las Vegas that eliminates hazardous vibrations tition at the World of was once again a popular destination through both the floor plate and operating Concrete, celebrates his for thousands of attendees at the annuconsole. The cab protects the operator victory on a new cusal concrete construction show. Each from weather elements, as well as from tomized CRT 48-35VX year the Wacker Neuson trowel chaltrees or other obstacles, while offering ride-on trowel powered lenge competition gets more popular. by a special Vanguard spacious comfort to enhance the working This year many past participants and big block V-twin engine. environment. The platform provides two past winners took to the course in Wiebe is owner-finanenhanced job site visibility, while dual hopes of winning the grand prize: a cial manager of grade and slope controls allow simple customized CRT 48-35VX ride-on Extreme Concrete Inc., and safe operation from either side of the trowel powered by a special Vanguard Linden, Alberta, Canada. machine, according to the manufacturer. big block V-twin engine and an allBesides winning the For fast maintenance in the field, the expense paid trip for two to the trowel for his company, BM2000/60-2 features quick-change cutCaribbean. he also received a oneting teeth and holders. Maintenance is week trip to the More than 150 trowel operators took further simplified by an onboard computCaribbean for himself er system, complete with graphic LCD see CHALLENGE page 76 and a guest. readout, that monitors and controls

Ride-On Trowel Challenge Draws Crowds


Page 70 • February 18, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

GOMACO’s Paver-Mounted GSI a Paving Contractor’s Tool GOMACO is experiencing an increased demand for the new paver-mounted GSI (GOMACO Smoothness Indicator) as a tool for paving contractors checking their rideability on-the-go. GOMACO introduced new hardware and software for this paving contractor’s tool at World of Concrete 2012 in Las Vegas. The pavermounted GSI was displayed on a GOMACO GP-2400 two-track slipform paver. The new paver-mounted GSI will feature new durable hardware with a wider, 7 in. (17.8 cm) diagonal touch-screen monitor and a new adjustable mount for achieving the optimum viewing angle. A single CAN-based connection is all that is now needed to the screen, reducing cable runs and connections while adding versatility to the adjustable screen mount. WiFi, Bluetooth and USB connectivity also will be added to the new model to provide wireless printing and wireless downloading and uploading capabilities from a laptop. Behind the scene software enhancements will include easier setup and troubleshooting guides, as well as new userfriendly screens for data visualization. The paver-mounted GSI provides immediate smoothness readings, right out of the paver, and displays these readings on

the touch-screen monitor so they can be viewed instantly. The GSI traces the slab and takes smoothness readings simultaneously from three different sensors on each trace. The GSI can trace up to eight wheel tracks, for a total of four lanes in a single pass. The GSI trace over the new slab will provide smoothness readings in multiple indexes, including the GSI number, IRI, PI (profile index based on the California profilograph), or it can be exported as an .erd file to create several other indexes. The indexes are derived from the true profile of the surface, determined by the data collected. These indexes are viewed and monitored on the GSI’s touch-screen monitor. The on-the-go surface smoothness information includes station and footage documentation for later reference of bump and smoothness locations. The GSI’s bump alarm can be set with project parameters. If a bump occurs during paving that is out of parameter, a bump warning is displayed and the bump’s station location is marked on the graph for exact reference. The GSI’s feedback allows on-the-go adjustments to fine-tune the paving operation. Contractors instantly know how changes to a number of different paving

variables directly affect the quality of the ride. Instant results eliminates having to wait until the cured concrete has been profilographed to see how the variables affected ride. The GSI also is available as a mobile unit, providing the same smoothness monitoring and quality assurance as a pavermounted GSI. It also can be outfitted with GSITools, GOMACO’s software application that performs post processing of exported GSI trace data. With GSITools, the GSI can be used in a variety of applications, including the Grade Analysis Tool, which can build a profile of the grade and estimate the concrete yield of the project. The GSI Survey Tool is a new application. A GSI trace over an existing roadway can provide data for a 3D model in an overlay application. The GSI will collect the data with multiple traces (up to eight) in a single pass. This single pass with the GSI on the project totally eliminates the tedious handwork of two survey engineers and provides an accurate visualization of an existing roadway for a 3D model to be used for stringless paving of an overlay project. For more information, visit www.gomaco.com.

Two paver-mounted GSI units monitor the smoothness of the new concrete slab. The information is instantly displayed and reviewed on a single touch-screen monitor mounted on the side of this GOMACO GHP2800 paver.

Terex Streamlines Its Roadbuilding Organization Terex has streamlined its North American Roadbuilding manufacturing facilities, enabling it to work more closely as a unit and offer improved equipment sales and service to its customers. Leading this effort, Don Anderson, general manager of Terex Roadbuilding, now has managerial responsibilities for all three North American road building equipment facilities located in Canton, S.D., Fort Wayne, Ind., and Oklahoma City, Okla. “Terex continues to be the only manufacturer to offer contractors a full array of both asphalt and concrete Terex has streamlined its North American Roadbuilding manufacturing facilities, equipment solutions,” said closely as a unit and offer improved equipment sales and service to its customers. Anderson. “We are focusing on our core road and bridge building businesses and right-sizing those businesses to meet Roadbuilding district managers in North America will have sales responsibilities for the entire road building equipment demand, so we can better serve our customers.” Continuing its commitment of servicing and supporting offering, which includes more than 75 products from the customers and dealers, Terex Roadbuilding North America three North American manufacturing facilities. Leading this team is David Rinas, who now serves as has realigned its field sales force to mirror the centralized focus at the factories. Beginning in 2012, all Terex director of sales and marketing of Terex Roadbuilding North

America. Rinas joined Terex in 2009 as sales director of Terex front- and rear-discharge mixer trucks in Fort Wayne and now also serves as interim site director of the Fort Wayne facility. He now has sales and support management responsibilities throughout the United States and Canada for the entire Terex Roadbuilding asphalt and concrete equipment lines. “We maintain a diverse and experienced field sales force, with some of our district managers tallying more than 30 years of experience in providing equipment soluenabling it to work more tions to dealers and contractors,” said Rinas. “By allowing them to sell the entire product offering — no matter if it’s an automatic roller paver from our new manufacturing facility in Canton, an asphalt paver or reclaimer/stabilizer built in Oklahoma City or a mixer truck from Fort Wayne — this enables our district managers to develop a deeper relationship with our dealers and customers.” For more information, visit www.terex.com.


Construction Equipment Guide â&#x20AC;˘ Paving Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 18, 2012 â&#x20AC;˘ Page 71

Double Drum High-Frequency Vibratory Asphalt Roller Dynapacâ&#x20AC;&#x2122;s CC624HF double-drum high-frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features: Â&#x2021; 30,000-pound operating weight Â&#x2021; 84-inch wide, 60-inch diameter drum Â&#x2021; Compaction vibratory force of 23,850 to 37,350 lbs Â&#x2021; Static linear load of 158 lbs/in Â&#x2021; Vibration frequency from 3,060 to 4,020 vpr Â&#x2021; Powered by a 152 hp Cummins QSB 4.5 T3 engine Â&#x2021; Rear engine position and large, easy-to-open engine hood makes maintenance a snap Â&#x2021; â&#x20AC;&#x153;Softâ&#x20AC;? start and stop prevents asphalt unevenness or cracking Â&#x2021; Optional Dynapac Compaction Analyzer for Asphalt provides critical information for quality paving '\QDSDF&&+)ÂŤXOWLPDWHLQYLVLELOLW\IXHOHIÂżFLHQF\DQG SHUIRUPDQFHHIÂżFLHQWO\FRPSDFWLQJDQ\W\SHRIDVSKDOWPL[

Authorized Dynapac Dealers Brooks Tractor www.brookstractor.com

Construction Machinery Company

Hayden - Murphy Equip. Co.

www.cmcky.com

www.hayden-murphy.com

608.837.5141

Columbus Equipment Company www.columbusequipment. com

Owensboro, KY

Milwaukee, WI

Columbus, OH

877.683.2262

Minneapolis, MN 952.884.2301

614.443.6541

Louisville, KY

Toledo, OH

866.901.2262

Sun Prairie, WI

414.462.9790

West Salem, WI 608.786.2644

419.872.7101

De Pere, WI

Cincinnati, OH

920.336.5711

Diamond Equipment

Logan Contractors Supply www.logancontractors.com

513.771.3922

www.diamondequipment.com

Omaha, NE

5LFKÂżHOG2+

Bowling Green, KY

402.339.3900

Casey Equipment www.casey-equipment.com

330.659.6681

270.781.1061

Des Moines, IA

Cadiz, OH

Evansville, IN

515.253.9048

Arlington Heights, IL

740.942.8871

812.425.4428

Bettendorf, IA

847.437.8686

Dayton, OH

Mt. Vernon, IL

563.441.2949

Lemont, IL

937.879.3154

618.242.2273

630.257.1261

Canton, OH

Terre Haute, IN

Luby Equipment www.lubyequipment.com

Rockford, IL

330.453.4521

812.299.4747

815.332.8222

Painesville, OH

636.343.9970

440.352.0452

DMI Diesel Machinery, Inc.

Piketon, OH

www.dieselmachinery.com

217.222.5454

Sioux Falls, SD

Oâ&#x20AC;&#x2122;Fallon, MO

605.336.0411

636.332.9970

Aberdeen, SD

Cape Girardeau, MO

605.725.4364

573.334.9937

740.289.3757

Rapid City, SD 605.348.7438

Dynapac USA

3700 East 68th Avenue Commerce City, CO 80022

Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us

Fenton, MO Quincy, IL

MacDonald Machinery

Titan Machinery

www.macdonaldmachinery.com

www.titanmachinery.com

Lafayette, IN

Bismarck,ND

765.742.2080

701.250.7925

Fort Wayne, IN

Minot, ND

260.747.1561

701.852.3188

South Bend, IN

Fargo, ND

574.271.0800

701.237.3333

Indianapolis, IN 317.856.3000

The Victor L. Phillips Co. www.vlpco.com

NCS Equipment

Topeka, KS

www.ncsequipment.info

785.267.4345

Hastings, NE

Wichita, KS

402.462.2252

316.838.3346

Kearney, NE

Garden City, KS

308.237.0777

620.275.1996

Grand Island, NE

Kansas City, MO

308.398.0640

816.241.9290

Lincoln, NE

Joplin, MO

402.466.1550

417.781.8222

Bertrand, NE

6SULQJÂżHOG02

308.472.5077

417.887.2729

Columbus, NE 402.562.1550


Page 72 • February 18, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

3517 Wayne White Rd., Climax, NC 27233

866-430-7539

jfwequip@aol.com www.jfwequipment.com

1997 Etnyre K Chip Spreader, Cummins diesel engine, 13’ 6” spread hopper, hydrostatic drive, computer

2009 Marathon KERA145HD Rubberized Melting Kettle for Crack Sealing and Waterproofing, 145 gallon, 26hp 3 cylinder Kohler dsl eng, single continuous ignition dsl burner, auto. temp. control, hyd. agitation, 18’ oil heated hose sys, heated applicator wand with swivel sealing shoe, overnight heating, 80cfm air compressor

1999 Rosco Maximizer II Distributor, 1750 gallons, EZ-1S computer w/1 ft cut-offs, diesel heat, 14 ft spray bar, front mount pump, IH 4700 w/DT466E diesel engine, 6+ trans (7 spd- 6 plus low gear), air brakes, a/c, 33,000 GVW

2003 Ingersoll Rand PT125R Roller, pneumatic 9 wheel, Cummins B3.3L, water system, co-co mats

2011 Powermoon 2000W Balloon Light, lights 20,000 sq. ft, no glare, No harsh shadows, wide light distribution, High portability – Small storage Solid and robust, safety and work efficiency at night increase enormously!

2011 Marathon TPS 250T Tack Distributor, trailer mounted, Honda 5.5hp gas engine, 10GPM pumping system, 250 gallon capacity, 5 ft spray wand w/40 ft hose, 10" filler lid, hose reel, electric brakes

2005 Etnyre 6750 Gallon Distributor Tanker, s/n T-5102, 6750 Gallon Capacity, Pump Off Front or Rear, NO Heat

2007 Broce CR350 broom, OROPS canopy, water tank, hydrostatic drive, CAT diesel engine

2005 Blaw Knox PF 3200 paver, Omni IIIA screed 10-18ft, power crown & slope, smoke eater, Cummins diesel engine

Serving Serving the the Asphalt Asphalt Industry Industry for for 25 25 Years Years Roland Machinery Company DePere, WI 920/532-0165 Deforest, WI 608/842-4151 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Eau Clair, WI 715/874-5400 Escanaba, MI 906/786-6920 Springfield, IL 217/789-7711 Carterville, IL 618/985-3399 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Portage, IN 219/764-8080

Share Curiosity. Read Together. w w w. r e a d . g o v VT LeeBoy, Inc. • 500 Lincoln County Parkway Ext. • Lincolnton, N.C. 28092 • 704.966.3300 • www.leeboy.com


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 18, 2012 • Page 73

Mauldin’s 1750-C Super Paver is ready for fast and hard action. Unmatched performance and durability set this heavyweight apart from all others.

M413XT

Check the details at www.4aMauldin.com. MG622

Precision Spray

Discover More Ways Mauldin Can Help You Become a Master

of the Mat.

Calder Brothers Corporation 250 E. Warehouse Ct. | Taylors, SC 29687

phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com Finkbiner Equipment Co. 15 W 400 No. Frontage Rd. Burr Ridge, IL 60527 (630) 654-3700 Fax: (630) 654-3792 www.finkbinerequipment.com

Whayne Supply Co. 1400 Cecil Ave. • Louisville, KY 40211 (502) 774-4441• Fax: (502) 778-3543 www.whayne.com Ashland, KY (606) 928-3444 Bowling Green, KY (270) 843-3275 Corbin, KY (606) 528-3140 Evansville, IN (812) 425-4651 Hazard, KY (606) 439-4040

Hopkinsville, KY (800) 494-2963 Lexington, KY (859) 254-2756 Paducah, KY (270) 443-3631 Pikeville, KY (606) 437-6265

Miller-Bradford & Risberg, Inc. W250 N6851 Highway 164 Sussex, WI 53089 (262) 246-5700 Fax: 262-246-5719 Madison, WI (608) 222-9191 Eau Claire, WI (715) 832-3443 DePere, WI (920) 338-5800 Abbotsford, WI (715) 223-2381 Negaunee, MI (908) 475-4181 www.miller-bradford.com


Page 74 • February 18, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Chicago Pneumatic New Roadtec Cutter Delivers Offers Equipment Line Enhanced, Safe Micro-Milling Results A full line of small-size soil and asphalt light compaction equipment is available from Chicago Pneumatic. Included in the category is a range of forward soil and asphalt plates, high-speed asphalt plates, forward and reversible plates, a walk-behind double drum roller, tampers and a vibratory trench compactor. The products are designed to meet the variety of needs that contractors and rental companies face. Forward Soil and Asphalt Plates There are six models of Chicago Pneumatic forward soil and asphalt plates available. They range from operating weights of 113- to 275-lbs. (51 to 125 kg) and plate widths of 13- to 20-in. (33 to 51 cm). Centrifugal force ranges from 1,888 - to 4,800-lbs. All are powered by Honda engines. High-Speed Asphalt Plates The MV90 and MV100 are equipped with a large water tank and a stainless-steel sprinkler system designed for compacting asphalt quickly and without interruption. The machines are designed to be easy to turn and maneuver. Classified as light machines the MV90 weighs 189 lbs. (85.7 kg), while the MV100 weighs 205 lbs. (93 kg). Forward and Reversible Plates Intended for more demanding jobs, the range of seven models of Chicago Pneumatic forward and reversible plates offer operating weights ranging from 344- to 1,111-lbs. (156 to 504 kg) and centrifugal force of 7,875- to 13,488-lbs. The heaviest model, the MV480, features an electric start. All Chicago Pneumatic forward and reversible plate machines are available in a choice of gas-powered Honda engines or Hatz diesel engines, which are housed within a heavy-duty frame. The bottom plates are constructed from Hardox 400 steel with a hardness of 400 HBW. Walk Behind Double Drum Roller The MR7000 is a fully hydraulic, compact, walk-behind roller with stepless forward/backward control and ergonomic handles that fold-up for storage and transporting. Equipped with a Hatz engine with a power reserve feature and a 19-gal. (72 L) water tank that’s positioned to protect the hydraulic components, the MR7000 is intended for compacting thin layers on granular soils and asphalt. The machine features an oil-cooling system designed to reduce unplanned stops and increase the working life. Tampers Chicago Pneumatic’s four models of tampers are designed to be wellbalanced for ease of use. Operating weights range from 137- to 185-lbs. (62 to 84 kg) and provide centrifugal force from 2,985 to 4,800-lbs. The interchangeable bottom plates are 9-in. (23 cm) wide on the smallest unit and 11-in. (28 cm) on the other three models. The 4-stroke engine has an efficient carburator and a high capacity air filter — which means lower fuel consumption and lower exhaust emissions, according to the manufacturer. Vibratory Trench Compactor The Bluetooth radio-controlled LP8500 trench compactor is designed for cohesive soil, both in confined areas (such as trenches, construction back-fills) and on roads. Fully hydraulic, the LP8500 is powered by a 17 hp at 2,400 rpm Hatz diesel engine. The machine is equipped with an emergency manually controlled system which includes an emergency push-stop bar and a safety push-stop button. The operating weight is 3,683 lbs. (1,670 kg) and centrifugal force of 16,500 lbs. The Chicago Pneumatic vibratory trench compactor features 24- or 33in. (61 or 84 cm) high profile drums as standard. For more information, visit www.cp.com.

With new DOT specs for thinner friction courses, proper surface preparation is more important than ever. Delaminating of thin courses is likely when surfaces are prepared with conventional milling. What’s more, water can get trapped in the valleys of a conventionally milled surface, leading to premature pavement failure. In thin overlay applications micro-milling is required for good results. Roadtec now offers a cutter that produces a fine, straight-line pattern, which neither deviates with changes in travel speed nor machine stops for truck changes. DOT tests of the surface have been passed consistently with this cutter. Moreover, the milled surface’s texture is extremely safe for cars and motorcycles alike when opened to traffic before paving begins, according to the manufacturer. Tooth consumption is extremely low with this product. On a recent job consisting of 5 mi. (8 km) of roadway (10 lanes mi. [16 km]), 1 in. (2.5 cm) removal with a micro finish, and an average travel speed of 48.5 fpm (14.7 mpm) and as high as 70 fpm (21.3 mpm), zero teeth were changed during the 5-day project.

Consistent straight-line micro-milled pattern produced by Roadtec’s new cutter drum.

Marion Roofing Company Recycles Shingles Into Asphalt in Iowa County CEDAR RAPIDS, Iowa (AP) A Marion roofing company is joining forces with the Cedar Rapids/Linn County Solid Waste Agency to turn old shingles into asphalt for road projects. The roof-to-roads recycling project has been under way elsewhere in the country and has emerged in recent years in Iowa, the Gazette reported. Joe Horaney, spokesman of the solid waste agency, said it hopes to divert 6,000 tons of shingles from the solid waste expected to be buried at the landfill over the next year. Jeremy Bleeker, owner of Eastern Iowa Construction in Marion, has been one of the state’s pioneers in the effort and is joining forces with the solid waste agency to move the effort forward faster in Iowa. He said data shows the agency will be able to turn 10,000 tons of recycled shingles a year into asphalt. Horaney said the landfill diverted 500 tons of shingles in the first 10 days of November alone. He said the idea is to extend the life of the landfill and turn a waste product into something useful. Eastern Iowa Construction’s spinoff, RAS Suppliers LLC, is among a handful of entities approved by the Iowa Department of Transportation to recycle shingles for asphalt paving, and RAS has been working on the effort for a couple of years. The recycled shingles most likely will end up at LL Pelling LLC, an asphalt firm with plants in Cedar

Rapids, Marion and Iowa City. Chuck Finnegan, president of LL Pelling in North Liberty, said it has been incorporating recycled asphalt shingles into its road asphalt mix in the past year or so as part of a DOT trial. Finnegan said new asphalt on Highway 13 between Highway 30 and Mount Vernon Road and on state projects in Anamosa and Oxford Junction have recycled asphalt shingles incorporated into the mix. Increasing costs of petroleum, an ingredient in asphalt, has companies like Pelling lining up for recycled asphalt shingles, Finnegan said. “The end result is what matters,” he said. “You’re shooting for a perfect cake. You know what you want your carrot cake to look like and taste like, and it doesn’t matter what you add as long as you come out with the end result.” Roger Boulet, a materials engineer with the Iowa DOT’s Cedar Rapids office, said other states have allowed the use of recycled asphalt shingles in pavement for a while. Bleeker’s Eastern Iowa Construction, the Metro Waste Authority in Des Moines and the Waste Commission of Scott County were approved by the DOT last year to provide recycled shingles as part of a trial. Boulet said the DOT is looking at ending the trial and allowing recycled shingles as an option in some state projects.


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 18, 2012 • Page 75

Our rollers are pretty basic. Basically perfect. BOMAG improves on perfection with the BW120AD-4 roller. Want a roller that will finish the job better, faster and more efficiently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG. To do the best job, you need the best equipment. To learn more visit www.bomag-americas.com, or call 1-800-78-BOMAG today.

THE COMPACTION EXPERTS

1400 W. Ogden Ave. Naperville, IL 60563 630/355-7150 Rockford, IL 815/961-3160

South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Rockdale, IL 815/730-9011

200 Erb Industrial Dr. Fenton, MO, 63026 636/349-0200

Cuba, MO 573/885-0500

Evansville, IN 812/473-0484

Foristell, MO 636/463-2500

Owensboro, KY 270/684-2339

Mount Vernon, IL 618/244-6800

Cape Girardeau, MO 573/334-0563

Paducah, KY 270/554-1131


Page 76 • February 18, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Wacker Neuson Awards New CRT 48-35VX as Grand Prize CHALLENGE from page 69

Road Machinery & Supplies

McAllister Equipment Co.

Savage, MN 952/895-9595 800/888-9515

Des Moines, IA 218/741-9011 800/555-1445

12500 S. Cicero Ave. Alsip, IL 60803 708/389-7700

Duluth, MN 218/727-8671 800/888-9535

Sioux City, IA 712/252-0538 800/633-9104

Villa Park, IL 630/530-7600

Grand Rapids, MN 218/328-5916 800/459-5916

Cedar Rapids, IA 319/363-9655 800/616-6615

Rockford, IL 815/227-0555

East Peoria, IL 309/694-4455 Springfield, IL 217/789-0351

this year’s challenge held in Wacker Neuson’s outdoor exhibit at World of Concrete. The challenge tested the participants’ entire range of skills as they maneuvered around an obstacle course on the 2,400 sq. ft. slab. Preliminary competitions were held Tuesday through Thursday during the show. The contestants with the top 10 fastest times from the preliminaries advanced to the finals on Jan. 26. The top 10 finalists each had one run through the course and that time was added to the preliminary time. And the Winner Is... Darin Wiebe, Extreme Concrete Inc., Linden, Alberta Canada, took first place. His combined winning time was 67.428 seconds. Wiebe came into the finals in second place with a qualifying time of 34.312. His final run time was 33.116 seconds. It was a friendly competition between Wiebe and his partner at Extreme Concrete, Jon Baerg. Baerg came into the finals in first place with

a qualifying time of 34.084 and with his final run time of 33.553 he was just a mere .209 seconds behind Wiebe with a finishing time 67.637 seconds. For his efforts Baerg went home with a Wacker Neuson CT 36, 36-in. walk behind trowel. The third place finisher was Bruce Gesick, from Slater and Son Concrete, Chico, Calif. Gesick finished with a combined time of 70.220 and went home with a BTS 635s portable cut-off saw. Extreme Concrete Inc. will benefit from the CRT 48-35VX and Wiebe and his wife Melanie will enjoy a one week vacation in the Caribbean. This year’s course was run on Wacker Neuson’s World of Concrete 30 by 80 ft. slab that measured at a floor flatness of FF-152. Thousands of World of Concrete spectators watched the challenge throughout the three days and toured Wacker Neuson’s exhibit that showcased a complete line of concrete and construction products. For more information, visit www.trowelchallenge.com.


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 18, 2012 • Page 77

ROAD MACHINERY & SUPPLIES COMPANY

CASEY EQUIPMENT COMPANY

5633 W Hwy 13 Savage, MN 55378 952/895-9595 • 800/888-9515 Duluth, MN 218/727-8671 • 800/888-9535 Grand Rapids, MN 218/328-5916 • 800/459-5916 Virginia, MN 218/741-9011 • 800/752-4304

1603 East Algonquin Rd. Arlington Heights, IL 60005 847/437-8686 • Fax: 847/437-8738 16754 New Ave. Lemont, IL 60439 630/257-1261 • Fax: 630/257-0614 1548 Huntwood Drive Cherry Valley, IL 61016 815/332-8222 • Fax: 815/332-3056

www.casey-equipment.com

ROLAND MACHINERY Springfield, IL 217/789-7711 Carterville, IL 618/985-3399 Portage, IN 219/764-8080 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252

Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Eau Claire, WI 715/874-5400 DePere, WI 920/532-0165 Deforest, WI 608/842-4151

Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 2600 S. Lincoln Rd. Escanaba, MI 906/786-6920 Fax: 906/786-5813


Page 78 • February 18, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

The Worldwide Leader in Concrete Paving Technology

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY ❘ 800-831-2320

ROAD MACHINERY & SUPPLIES Des Moines, IA 218/741-9011 • 800/555-1445 Sioux City, IA 712/252-0538 • 800/633-9104 Cedar Rapids, IA 319/363-9655 • 800/616-6615 Milan, IL 309/787-1742 • 800/633-9114

BRANDEIS MACHINERY & SUPPLY COMPANY 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 • Fax: 502/499-3195 www.brandeismachinery.com Corbin, KY 606/528-3700 • Fax: 606/528-9014

Lexington, KY 859/259-3456 • Fax: 859/254-0783 Stanville, KY 606/478-9201 • Fax: 606/478-9208 Paducah, KY 270/444-8390 • Fax: 270/575-4907

SWANSTON EQUIPMENT COMPANY 3450 West Main Fargo, ND 58103 800/369-0371 2219 Elk Drive Minot, ND 58107 800/210-8766


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 18, 2012 • Page 79

BRANDEIS MACHINERY & SUPPLY COMPANY

ROLAND MACHINERY DePere WI 920/532-0165 • 920/532-0526 Deforest WI 608/842-4151 Franksville WI 262/835-2710 Schofield WI 715/355-9898 Eau Claire, WI 715/874-5400

Escanaba MI 906/786-6920 Springfield, IL 217/789-7711 Marengo, IL 815/923-4966 Bolingbrook IL 630/739-7474 Carterville, IL 618/985-3399

Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Portage, IN 219/764-8080

1801 Watterson Tr. Louisville, KY 40299 502/491-4000 • Fax: 502/499-3195 www.brandeismachinery.com Evansville, IN 812/425-4491 • Fax 812/425-1171 Corbin, KY 606/528-3700 • Fax 606/528-9014 Lexington, KY 859/259-3456 • Fax 859/254-0783

Stanville, KY 606/478-9201 • Fax 606/478-9208 Paducah, KY 270/444-8390 • Fax 270/575-4907 Indianapolis, IN 317/872-8410 • Fax 317/872-8417 Ft.Wayne, IN 260/489-4551 • Fax 260/489-1620 South Bend, IN 574/233-8770 • Fax 574/233-8775


Page 80 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • February 18, 2012 • Page 81

YOUR DIRECT LINK

to the Largest Manufacturers of High Quality

UNDERCARRIAGE!

AUTHORIZED OEM DEALER Hitachi Excavators Hitachi Trucks Kawasaki Gehl Euclid Talbert Protec Waldon Perkins Hensley

Bucyrus Blades Cummins Baldwin Filters Expander Systems Allied/Rammer Esco Isuzu Hino Sennebogen Moxy

YOUR PARTS SOURCE Dresser (new & non-OEM) Galion (new & non-OEM) Wabco Michigan Samsung IH Cat (non-OEM) Remanufactured Components ...plus many others

Visit our website: www.howelltractor.com 2770 May Road Peru, Ill 61354 800-342-6072 Fax: 815-224-2538

480 Blain Street Gary, IN 46406 800-852-8816 Fax: 219-977-4220

All Makes & Models Heavy Equipment Complete Undercarriage Systems Track Chains and Groups, Sprockets, Segments,Track Shoes, Idlers, Rollers. Full Warranty. Nationwide direct same-day shipping or installation at our facility.

We will not be Undersold by Anyone on Any Product of Comparable Quality! Call Today for a Quote!

563.872.4112

PH:: 563.872.4112 | F FAX: AX:: 563.872.5058 58 | PARTS@JJSCHECKEL.COM P PAR AR RTS@JJSCHECKEL.COM

21582 HWY 62,, BELLEVUE,, IOWA IOWA | WWW.JJSCHECKEL.COM WWW W.JJSCHECKEL.COM


Page 82 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95 More Bargains on pg 84 INTRODUCING: EXTREME SERVICE LONG THUMBS Super Special 50% OFF Surplus from Government order WAS $7,900 NOW $4,500 Free Pick-Up or Delivery Pahrump, NV 24 Hr. Shipping

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

2002 Bombardier SW48, 100HP Diesel, 473 Hrs, 2955 Miles, Cab & Heat, Tracks are in Great Shape ...........................................$17,500 4-5 PK 763/428-4107

2002 John Deere 250 Open Station, 1810 Hrs, weight kit, KV0250A351153 ...........$12,500 4-5 PK 763/444-8873

3-4 EB

NEW 2008 TEREX 4792, 23 1/2 ton boom truck, 92’ main boom, 26’-44’ jib, front outrigger, block, ball, LMI, 21’ steel bed, mounted on a NEW 2008 Sterling 300 HP Cummins, Cleveland, Ohio........... ........................................................................CALL Call Andy at 216-316-1511 3-4 EB

2002 Kobelco ED 190 Blade Runner, s/n YL02U0117, 6720 Hrs, VERY GOOD CONDITION, 10’2” Arm w/48” Bkt ....................................$65,000 3-4 JM Call David 219-696-5680

2005 Case CX240LC, s/n 241488, 6003 Hrs........... ....................................................................$69,000 3-4 JM Call David 219-696-5680

1991 John Deere 300D, S/N 775834, Open ROPS..........................................................$19,000 Call 502/456-4050 Ask for Melissa or Albert 3-4 EB

2009 Kawasaki 90ZV Loader, w/550 Hrs on Cummins QSM11 Engine, 75%+Rubber, Like New Call 888-9-RACKERS 3-4 JM Ask for Gary or Matt

1994 Dresser 510C, 80 HP, 1.75 yd Bucket, cab, new tires...............................................POR Diesel Machinery 1-800/456-4005 Ask for Don or Herb 4-5 PK

2007 Cat 305CR, 2265 Hrs, s/n HWJ01500, EROPS, Heat, A/C, Hyd. Thumb, Blade ....$41,500 Courts Machinery • 507/678-2752 3-4 PK

Low Hour 2007 Atlas Copco Air Compressors, 6 to Choose From......................Starting at $7,500 3-4 JM Call Brian @ 630-739-7770

2006 Case CX330, s/n N6SAP7025, 5100 Hrs, Cab w/Heat / AC, Boom 21’2”, Arm 13’3”, 31.5” -3Bar Steel Shoes, Control Selector Valve, Kent Coupler .....................................................$137,000 3-4 JM Call Mark @ 630-739-7770

Atlas Copco ROC F9 Hyd Drill, 5046 Hrs on Cat C9 Engine and 2600 Impact Hrs Call 888-9-RACKERS 3-4 JM Ask for Gary or Matt

2005 Cat 305CR, 3042 Hrs, Mitsubishi Diesel Recently Rebuilt, 42 HP, 11,000 Lbs, FOB Salina, Ks................................................$39,500

2006 JCB 3CX Side Shift.....................$54,500

1998 Bandit 12” Capacity Disc Chipper, Model 250XP, 235 Hrs, Perkins Diesel, Exc. Condition $25,900 1-800-950-3321 Wichita, KS E/N 1050707

Call Kirk Nelson at 785-823-6378 www.sellersequipment.com

Call Kirk Nelson at 785-823-6378 www.sellersequipment.com

775-751-3849 800-705-6605 attintl@loretel.net www.attachmentsintl.com 4-5 AP

1991 GROVE RT700B, 40 ton rough terrain crane, 110’ main boom, 32’56’ jib, two winches, block, ball, Deutz diesel engine, very good condition, Cleveland, Ohio........ ........................CALL Call Andy at 216-316-1511

2004 Takeuchi TL140, s/n 21402072, 2999 Hrs, Cab w/Heat & A/C, Faster Hyd Couplers, 76” Tooth Bkt, Tak Controls, Rubber Tracks...............$24,000 3-4 JM Call Steve @ 630-878-8765

3-4 JM

3-4 JM

4-5 JM

2008 Bobcat T320, 1498 Hrs, A91, SJC, RSC  K-CTL .........................................................$42,000 1-800-950-3321 Tulsa, OK E/N 1019183 4-5 JM


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 83

CLASSIFIEDS AERIAL LIFTS Manlifts All Makes & Models Rental, Parts, Service, Training Modern Equipment Sales & Rental 800/445-4381

Scissor Lifts 2008 Skyjack SJ6826RT, 4WD, Kubota dual fuel (gas/propane), like new, 132 hours...........................$24,300. McAllister Equipment Jim Tracey 708/297-3541

ASPHALT EQUIPMENT Asphalt Cutters ASPHALT CUTTERS EXTREME SERVICE Large Overseas Order 10 Extra Units. Retails: $3,100 Blowout Special: $2,000 24 Hr. Shipping Ph: 218-8636445 Email: attintl@loretel.net www.attachmentsintl.com

BORING EQUIPMENT Boring 2008 Yanmar CBL 40C, includes PTO, 3 pt. hitch, backhoe, loader bucket attached w/skid plate, great condition, 216 hours....................$32,500. Vermeer Iowa 641-628-2000

CRAWLER TRACTORS Crawler Tractor 2007 John Deere 650J LGP, A/C, cab, 30'' pads, LGP track, 2114 hours.................$89,500. Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com

2003 John Deere 650H LGP, sweeps, very good, 2531 hours...........................$58,500. 2005 John Deere 550J, LGP, OROPS, very good, 1154 hours...........................$68,500.

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 Modern Equipment Sales & Rental 800/445-4381

Skid Steer Loaders

EXCAVATORS

2005 John Deere 300D, cab, A/C, AWD, 4334 hours ..................................$165,750. 2007 John Deere 332, aux. hyds, cab, foot/hand controls, 4673 hours..................$26,285.

1999 John Deere 450LC, long stick, cwt removal device, 48'' bucket, very good, 9643 hours...........................$89,500. 616-538-2400 NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Mini Excavators

Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com

Wheel Loaders NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

NH Construction Equipment New & Used Parts & Service

2004 John Deere 644J, cab, GP bucket, ride control, 8125 hours.........................$129,500.

Modern Equipment Sales & Rental 800-445-4381

Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com

Wheeled Excavators 2010 Volvo EW180C, 8'6'' arm, A/C, hammer shear piping, very good, 675 hours ..................................$196,000. McAllister Equipment Jim Tracey 708/297-3541

FORESTRY EQUIPMENT Logging Equipment 1996 Caterpillar 320L stroke delimber, 31" pads, Balderson attachment, good condition, 7157 hours ...............$92,000 Five Star Equipment Inc. 607/775-2006

MODERN GROUP Norris Sales Company

- Front-end Loaders &

ROAD MAINTENANCE

Norris Sales Company 610/279-5777 www.norrissales.com Daily - Weekly - Monthly Competitive Rates Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders!

offers training for:

610/279-5777

Backhoes - Aerial work platforms (AWP)

Sweepers 2006 Broce RJ350, cab, A/C,

(Boom & Scissor Lifts)

150 gallon water tank, 8' broom,

- Rough Terrain Forklifts

very good condition, 765 hours ....................................$26,500.

(Gradall, Lull, JCB) - Skid Steer Loaders

McAllister Equipment Jim Tracey

Now in PA & NJ

For information, pricing or

708/297-3541

Norris Sales Company 800/547-RENT (7368) 610/279-5777 Construction & Industrial Equipment Rentals Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping

reservations:

TRAINING

Call 1-800-223-3827

Operator Training

www.moderngroup.com

Are your operators compliant

All prices include Trainer, travel

with Federal Standards,

and material

OSHA, ANSI, ISO?

NO HIDDEN COSTS

Classified...2 Insertions...95¢ Per Word Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

One Word HEADING (Category to place listing):

In

Each

Block

2007 John Deere 544J, Highlift, new tires, excellent, 4451 hours...........................$96,500. 616-538-2400

MISCELLANEOUS Service We Service What We Sell! Warranty, Maintenance and More!

Classified Rates: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction equipment Guide.

Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors

CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________

Norris Sales Company 610/279-5777

STREET______________________________________________________________________PHONE NO. _________________________________________________ CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________ Check Enclosed

VISA

MASTERCARD

AMERICAN EXPRESS

CARD NUMBER

EXP. DATE

RENTALS SIGNATURE OF AUTHORIZED CARDHOLDER

FORKLIFTS

Rental

Industrial Forklifts

Construction & Equpment & Supplies for the "Professionals"

Gradall/Lull Sales, Service, Training

Stone, Wacker, Honda, Gehl, JLG to name a few .....

Track Loaders

616-538-2400

Hydraulic Excavators

Daily - Weekly - Monthly & Long Term Rentals Available

TOLL FREE 1-800/523-2200 FAX 215/885-2910 470 Maryland Drive • Fort Washington, PA 19034 Email: sales@cegltd.com


Page 84 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

2006 Takeuchi TB135, 1975 Hrs, Cab w/Heat, Hydraulic Thumb, Coupler, Bucket, Rubber Tracks, 7635 Lbs.....................................................$28,800 Call Steve Samosky 262-373-2151 4-5 JM

2005 IR SD-450D, 54” Smooth Drum, 350 Hrs, OROPS, Drum Drive ..................................$28,750 Call Steve Samosky 262-373-2151 4-5 JM

2000 New Holland LS180, 2925 Hrs, Cab & Heat, New Tires, 72” Bkt, 2 Speed ......................$14,300 Call Steve Samosky 262-373-2151 4-5 JM

1986 Cat D5H, OROPS, 6-Way Blade, 75% U/C, 20” Tracks, 119HP......................................$28,750 Call Steve Samosky 262-373-2151 4-5 JM

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region.

1983 Pettibone Cary-Lift Model 204, 8000 Hrs, Electric Rotating Pole Baler, 15’ Working Height, 12,000 Lb. Rated Lift Capacity, Wt. 46,000 Lbs, Detroit Diesel ..............................................$85,000 4-5 JM Call Dan 314-393-7249

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

Company Wrench Awarded CP100 Magnet Combo Patent Company Wrench and owner Brad Hutchinson received a patent for the CP100 magnet combo heavy equipment attachment he invented that significantly decreases the danger of demolition projects and makes the jobs more efficient. This product can both pulverize concrete and collect the metal within using just one attachment. “We finally have a product where one operator can sit safely in the seat of the machine,” Hutchinson said. “They can pulverize the concrete and mag the rebar. They don’t need to leave the safety of the excavator cab and stay out of harm’s way.” Processing crushed concrete at demolition or recycling sites to extract rebar can be dangerous and time consuming, according to Hutchinson. The CP100 mag combo consists of a 65,000-lb. (29,483 kg) excavator with an attachment to pulverize concrete at the end of a long arm. The bucket also contains a magnet, which the operator runs over a pile of crushed concrete to pull out the metal rebar within. The inspiration for the CP100 mag combo originated after visiting job sites and listening to existing customers on their safety and labor cost issues. “We had multiple customers who suggest-

ed if you could find a way to do both with one machine, it would be a great advancement,” Hutchinson said. “So we got to work on it right away.” Hutchinson and the Company Wrench engineering department spent about 18 months devising and refining the CP100 and received the patent from the United States Patent and Trademark Office on Dec. 27 of last year. The patent is valid for 20 years and prevents anyone else from marketing or building the same type of equipment. “Concrete pulverizers and magnets are existing technology,” Hutchinson said. “But the redesign of the two together is what got us the patent — processing the concrete and recovering the rebar with one single machine. It’s an application patent where you’re taking existing technologies and making a new process out of it by joining them together.” The Komatsu PC270 excavator with the patented combo unit is available for sale or rent from Company Wrench. The pulverizer/magnet unit is available on its own but an excavator must be modified if not bought as a package. For more information, call 866/262-4181 The CP100 magnet combo can both pulverize concrete and collect the metal within or visit www.companywrench.com. using just one attachment.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 85

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. CATERPILLAR IT28G TOOL CARRIER | LOW HOUR IT28G WITH CAB/AC, GP BUCKET AND FORKS CONTACT: FRANK HORAN TRICO EQUIPMENT PHONE: 1-800-654-USED (8733) EXT. 1230 FAX: 856-697-4842 EMAIL: FHORAN@TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– ARTICULATED DUMP TRUCKS VOLVO A35D(S) | WANTED: TWO (2) VOLVO A35DS. AROUND 2000 HRS +-, TAILGATES, LINERS, PREFERABLY WEST COAST. WWW.SOMOTRACTOR.COM WWW.IEDAGROUP.COM WWW.FACEBOOK.COM/SOMOTRACTOR WWW.FACEBOOK.COM/EQUIPMENTPOST WWW.YOUTUBE.COM/SOMOTRACTOR WWW.TWITTER.COM/SOMOTRACTOR.COM CONTACT: CHRIS LOHMAN PHONE: (602) 363-2396 FAX: (480) 307-3711 EMAIL: SOMOTRACTOR@COX.NET –––––––––––––––––––––––––––––––– EXCAVATORS AND CAT LOADER | DEAR SIR, WE ARE LOCAL GOLD MINERS HERE IN MALI SUB-REGION OF WEST AFRICA. WE ARE LOOKING FOR COMPANY THAT WILL SUPPLY US WITH THE MENTIONED MACHINES ON JOINT VENTURE PARTINERSHIP TO INCREASE OUR PRODUCTION CAPACITY. CONTACT: MR.YUSSF GARUBA PHONE: +22370233959 FAX: +22365499083 EMAIL: AFRICA.INVESTMENT@YAHOO.COM –––––––––––––––––––––––––––––––– CATERPILLAR, HITACHI, DYNAPAC , KOMATSU | REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT 920.930.950B, E & 966D, E CAT 140G S/N:10,000 UP. DYNAPAC CA251D, CA262D, CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999-2005 HITACHI EXCAVATOR EX200-1, EX100WD-1, EX60WD-1, UH077, UH083 KOMATSU EXCAVATOR PC 200-6,-7. CONTACT: MR KHAN PHONE: +92-300-283-1078 EMAIL: IUKANDCO@YAHOO.COM –––––––––––––––––––––––––––––––– ANYONE LOOKING FOR A 1971 LIMA 450TC CRANE IN WORKING CONDITION ON A JOB SITE AND JUST RECEIVED YEARLY INSPECTION! HAS 170FT MAIN BOOM AND A 40FT JIB PHONE: 304 210-8404 EMAIL: CSMITH@SMITHBROSERECTION.COM –––––––––––––––––––––––––––––––– CATERPILLAR WHEEL LOADERS 950,950B,950E,966D,966E,966F,966FII | OFFER US AT GOOD PRICE & KINDLY E-MAIL ME DETAILS, PICTURES. CONTACT: IRFAN KHAN EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM ––––––––––––––––––––––––––––––––

HITACHI EXCAVATORS EX200, EX300, EX400 | PLEASE OFFER US GOOD PRICE & SEND US DETAILS, PICTURES. CONTACT: HIDAYAT KHAN PHONE: +92-345-8818803 EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– HITACHI,CATERPILLAR,DYNAPAC,JCB, KOMATSU | CATERPILLAR, HITACHI, DYNAPAC , KOMATSU | REGULAR REQUIREMENT OF MENTIONED MACHINES | MARKET MEET MACHINERY: CAT 920.930.950B, E & 966D,E CAT 140G S/N:10,000 UP. DYNAPAC CA251D, CA262D,CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999-2005 HITACHI EXCAVATOR EX200-1,EX100WD-1,EX60WD-1,UH077,UH083 KOMATSU EXCAVATOR PC 200-6,-7. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– SERVICE TRUCK WITH BOOM, WELDER, AIR COMPRESSOR, 2 TON TRUCK, AND 6 OR 8 THOUSAND POUND BOOM. CONTACT: BRYAN SWAN PHONE: 816-261-5467 EMAIL: BIGCHEVY78@YAHOO.COM –––––––––––––––––––––––––––––––– NEEDED ALL THE TIME FROM USA BULLDOZER D7 D8 D9 D10 WITH RIPPER OR WINCH USER CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– KOMATSU HM4001 | FOR RESALE OR PARTS CONTACT: PATRICK KELLY PHONE: 716-891-4311 EMAIL: PURCHASING@HRPARTS.COM –––––––––––––––––––––––––––––––– LOOKING TO TRADE CASE 24" BACKHOE BUCKET FOR 36" BACKHOE BUCKET CONTACT: KEVIN SANSALONE PHONE: 856-297-4758 EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– NEED BULLDOZER D10T 2009 AND UP RIPPER UNDER 9000 HOURS FROM USER ONLY CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– LOOKING TO PURCHASE SEVERAL UNITS OF THE FOLLOWING CATERPILLAR & KOMATSU MOTOR GRADERS: CAT 12G (1978 - 1995) CAT 140G (1988 1995) CAT 14G (1978 - 1995) CAT 14H (1995 - 2000) KOMATSU GD661-4 (1998 UP) KOMATSU GD705-4 (1998 UP) ALL EQUIPMENT MUST BE IN GOOD WORKING CONDITION. IF YOU HAVE ANY, PLEASE OFFER IT TO ME WITH COMPLETE SET OF PICTURES, PRICE, SERIAL NUMBER AND CONDITION. CONTACT: AIMN BLBOL PHONE: +971504814823 EMAIL: SALE@ALWAFAEQUIPMENT.COM ––––––––––––––––––––––––––––––––

CATERPILLAR PERFORMANCE HANDBOOKS | HANDBOOKS NO. 1,2,3,6,8 CONTACT: TOM HAUENSTEIN PHONE: 805 735 3649 FAX: 805 735 8785 EMAIL: COASTALEARTHMOVERS@ VERIZON.NET –––––––––––––––––––––––––––––––– PILE DRIVING | NEED USED 416 J&M OR ICE VIBRATORY HAMMER ASAP. THE OLDER THE BETTER CONTACT: ROBERT EMAIL: PILEMANMD@HOTMAIL.COM –––––––––––––––––––––––––––––––– MANITOU BUCKET WANTED***** | WANTED TO BUY 2 OR 3 YARD BUCKET FOR MANITOU TELEHANDLER OR OTHER ATTACHMENT FOR MANITOU CONTACT: TURBO MENZEL PHONE: (262) 613-2527 EMAIL: MENZELENGINEERING@GMAIL.COM –––––––––––––––––––––––––––––––– CAT 980 F, CAT 966 C ORIGINAL PAINTS CONTACT: HISHAM OSMAN PHONE: 7034156660 EMAIL: HISHAMOSMAN4U@HOTMAIL.COM –––––––––––––––––––––––––––––––– CATERPILLAR, HITACHI, DYNAPAC , KOMATSU | REGULAR REQUIREMENT OF MENTIONED MACHINES | (WE BUY FOR OUR STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT 920, 930, 950B, E & 966D, E CAT 140G S/N:10,000 UP. DYNAPAC CA251D,CA262D,CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1, EX100WD-1, EX60WD-1, UH07-7, UH083 KOMATSU EXCAVATOR PC 200-6,-7. IF AVAILABLE ANY TIME CONTACT ME CONTACT: IKRAM KHAN PHONE: +92-333-55-55-360 EMAIL: INFO@IUKCO.COM ––––––––––––––––––––––––––––––––

SEALCOAT/ASPHALT/PAVING | LOOKING TO BUY ALL TYPES OF ASPHALT RELATED EQUIPMENT ROLLERS PAVERS, SEALCOAT , STRIPERS, ASPHALT PLANERS. NO DEALERS PLEASE CONTACT: JAMES MANN PHONE: 1-404-273-9424 FAX: 1-770-306-2962 EMAIL: JAMES2525@MSN.COM –––––––––––––––––––––––––––––––– BOBCAT BRAND EQUIPMENT ***WANTED*** | BUYING BOBCAT BRAND SKID STEER LOADERS AND EXCAVATORS LOCATED IN THE SOUTH EASTERN UNITED STATES. ESPECIALLY LOOKING FOR LARGE FRAME MACHINES, S250, S300, A300, T250, T300, T320. PREFER GOLD PACKAGE MACHINES, BUT WILL CONSIDER ANYTHING BOBCAT. PLEASE EMAIL WHAT YOU WANT TO SELL, A FEW PHOTOS AND YOUR ASKING PRICE. THANKS IN ADVANCE. CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– 1984 CASE 680H | BACKHOE DIPPER STICK,W/WO EXTENDAHOE CONTACT: RAY HALGAS PHONE: 518-848-9023 FAX: 518-843-3614 EMAIL: RAYHALGAS@YAHOO.COM –––––––––––––––––––––––––––––––– CAT DOZERS | WE ARE LOOKING TO PURCHASE CATERPILLAR D9N & D9R DOZERS WITH RIPPERS IN GOOD CONDITION AND WITH POWERSHIFT TRANSMISSION ONLY. PLEASE OFFER ME WHAT YOU HAVE WITH COMPLETE SET OF PICTURES, CONDITION, SERIAL NUMBER, LOCATION, AND FINAL PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL: USA@ALWAFAEQUIPMENT.COM ––––––––––––––––––––––––––––––––

Call Stu Harris For Alex Lyon’s Atlantic City Auction on March 29, 30, 31 856/429-9149

856/429-9149

Fax# 856/429-4267 •  Cell# 609/457-2104

www.ecommercics.com/stuharris/

KOHLER 14HP MAGNUM ENGINE FOR A 1 TON BEUTHLING ROLLER CONTACT: RAY PHONE: 973 865 5342 FAX: 973 227 0763 EMAIL: CHIEFANDSON@VERIZON.NET –––––––––––––––––––––––––––––––– PILE HAMMERS | SEEKING ICE, MKT OR APE VIBRATORY PILE HAMMERS AND CAISSON BEAMS. WE ARRANGE FOR PICK-UP AND PAYMENT QUICKLY. YOUR BEST OPTION FOR SELLING YOUR PILE HAMMERS CONTACT: JEFF LAWSON PHONE: 864-542-4369 EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– VOLVO L90F PARTS | I WANT THE PRICE LIST FOR THESE PARTS. 1.20798675. 2.20973777. 3.21060258. CONTACT: AARON BAFFOE PHONE: 233244857601 EMAIL: AAROBAFF@YAHOO.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 | LATE MODEL LOW HOUR CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– DAEWOO 420 LCV | GOOD CONDITION AND LOW HOURS CONTACT: ABDELGAWAD ALI PHONE: +201009797657 FAX: +20226636455 EMAIL:ABDELGAWADALI@GMAIL.COM –––––––––––––––––––––––––––––––– PILE HAMMERS | LOOKING FOR ALL MAKES AND MODELS DIESEL HAMMERS AND VIBRATORY PILE DRIVERS. ATTACHMENTS ALSO WANTED. TOP DOLLAR PAID CONTACT: LISA S. PHONE: 201-444-6311 EMAIL: LISAS@ BTCTRANSPORTSYSTEMS.COM –––––––––––––––––––––––––––––––– NEEDED BULLDOZER KOMATSU 65PX15 2007 AND MORE UNDER 1500 HOURS ENC CAB USER CHEAP PRICE CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN @BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CATERPILLAR, HITACHI, DYNAPAC , KOMATSU | REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT 920.930.950B, E & 966D,E CAT 140G S/N:10,000 UP. DYNAPAC CA251D, CA262D, CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1,EX100WD-1,EX60WD-1,UH077,UH083 KOMATSU EXCAVATOR PC 200-6,-7. CONTACT: MR MAHSOOD PHONE: +92-333-55-55-360 EMAIL: IUK.IUKCO@GMAIL.COM ––––––––––––––––––––––––––––––––

BUYER NEEDED | HITACHI EXACAVTORS EX200 | WE REQUIRE HITACHI EXCAVATORS EX200-1 CATERPILLAR WHEEL LOADER 950 UH083 KOMATSU EXCAVATOR PC 200-6,-7 | AVAILABLE FOR SALE CONTACT: SOLOMON PEDRO PHONE: +447024053755 FAX: +447024053755 EMAIL: ATOPMACHINERYUK@GMAIL.COM –––––––––––––––––––––––––––––––– WHEEL LOADER | KOMATSU WA 320-5L OR WA 250-5L, TO 2000 HR, WITH Q.C., BUCKET, & FORKS, TKS, D. HUGHES CONTACT: DON HUGHES PHONE: +64274430633 FAX: +6435465640 EMAIL: DON@MATCO.CO.NZ –––––––––––––––––––––––––––––––– CAT IT28G | LOOKING FOR A GOOD USED IT28G WITH BUCKET AND FORKS AND MUST HAVE AN ENCLOSED ROPS CAB WITH A/C CONTACT: DAVID MULLINS PHONE: 276 328-0077 FAX: 606 644-0477 EMAIL: DMULLINS@VERIZON.NET –––––––––––––––––––––––––––––––– W20B CASE | UPPER DOOR LEFT HAND SIDE FROM SITTING INSIDE WITH GLASS OR NOT CONTACT: RANDY PHONE: 814 887 2717 FAX: 8148872214 EMAIL: RANDY@MCDOWELLLUMBER.COM –––––––––––––––––––––––––––––––– LULL 844C FROM CONTRACTOR WHOLESALE PRICE CONTACT: KEVIN SANSALONE PHONE: 856-297-4758 FAX: 856-362-5602 EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– HITACHI EXCAVATORS EX200 | WE REQUIRED HITACHI EXCAVATORS EX200-1 OR MARK I PLEASE LET US KNOW & SEND US DETAILS WITH GOOD PRICE. CONTACT: HIDAYAT MASOOD PHONE: +92-345-8818803 EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– DYNAPAC ROLLERS CA251D,CA262PD | WE NEED USED DYNAPAC ROLLERS CA251D,CA262D & PD ALSO WORK,PLEASE OFFER US & SEND US DETAILS, PICTURES & YOUR BEST PRICE. CONTACT: NAQIBKHAN INTERNATIONAL & COMPANY EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM ––––––––––––––––––––––––––––––––


Page 86 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Annual Florida Auctions Kick Off With Alex Lyon & Son in Kissimmee

T

he annual Florida Auctions kicked off Jan. 28 with Alex Lyon & Son holding a nine-day sale in Kissimmee, Fla. A wide range of equipment and tools went on the block. Over the first two days of the auction, thousands of lots of new and like new tools were sold, as well as generators, skid steer attachments, utility tractors and more. Mini-excavators, scissor lifts, trench boxes, landscape equipment and more highlighted day three. Day four featured scrapers, stump grinders, pumps, forklifts and concrete equipment, to name just a few. And days five through eight highlighted an extensive selection of rubber-tired loaders, excavators, pipelayers, backhoes, sweepers, motorgraders, dump trucks, hydraulic hammers, milling machines, rollers and much more. Even a few boats, motorcycles and automobiles found new Dick Tabb, president of Tabb Equipment Sales LLC, looks owners in the final day of the auction. over some of the wheel loaders at the annual Kissimmee see AUCTIONS page 88

This Caterpillar 988H wheel loader caught the attention of Hank Spies (L), remarketing manager, and Mike Sherman, corporate used equipment manager, both of Milton CAT.

sale.

This 1965 Huey helicopter used by the United States Marine Corps during the Vietnam War went up for auction at the annual sale. Construction Equipment Guide thanks all veterans and active duty military personnel.

Ron Corbut (L) of Hudco Manufacturing, Willoughby, Ohio, and Bobby T. Tedesco, president of Gorilla Hammers, said they are in a great spot with lots of traffic. Here, they are displaying one of their hammers — the 6HB135 Gorilla Hammer.

Mike Powers (R), auctioneer, calls for more bids on the trucks while Alex Lyon & Son President Jack Lyon gets another bid. Bill Rollinger Jr. of M. Adams Equipment, Rockford, Ill., tours the auction site via the M. Adams Equipment Co. golf cart.

Jerry (L) and Travis Wisel of Wisel Excavating, Fort Wayne, Ind., take a look at this Case 721D wheel loader.

Henry Nechville, owner of Nechville Excavating, Roberts, Wis., came to see if he could take this Case 921E wheel loader back home.

Jeff McKay came all the way from Davenport, Iowa, to look over the equipment, including this Bobcat T250.


CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 18, 2012 â&#x20AC;˘ Page 87

QAS 45 Portable Generator Offers 35 kW of Prime Power, Kubota Engine The Atlas Copco QAS 45 portable generator features a Kubota Tier IV Interim diesel engine and a Leroy Somer, LSA model, series alternator, enabling it to deliver 35 kW of prime power. The QAS 45 generator includes a standard multivoltage selector switch and QC1002 digital control system. The instrument panel enables all key operating functions to be managed without opening the canopy. A 70-gal. (265 L) fuel tank is expected to allow a 24-hour run time. Designed for extreme Designed for extreme weather conditions, the QAS 45 portable generator features a weather conditions, the QAS Zincor steel enclosure and its frame is designed to be spillage-free to protect the 45 portable generator fea- environment. tures a Zincor steel enclosure and its frame is designed to be spillage-free to protect the coolant heater and a wireless remote start. Extended warranties also are available. environment. For more information, call 800/732-6762 or visit Options available on the Atlas Copco QAS 45 portable generator include a battery charger and battery switch, a www.atlascopco.us.



  Accepting Excavators, Dozers, Loaders, Semis, Trucks, Trailers and Related Equipment! Komatsu PC400 Kom SA6D 125 E2 Engine, 306 HP, Wt: 95,146 lbs, 4 Yd Sand Bucket, Just off Job

 6 +*   

 Jct MN Hwy 95 & 25 Foley, MN

Accepting Consignments Until Noon on Saturday, March 3rd, 2012 For a complete list of our upcoming auctions visit www.iraymn.com           

3H*))IH%$,I+(*E)$%,     or Email iray@iraymn.com

Col. Raymond S. Henry - WI Lic. # 2490-52; MN Lic. # 05-11-002 Real Estate Auctioneer & GPPA Certified Equipment Appraiser


Page 88 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Alex Lyon & Son Get Annual Florida Auctions Started AUCTIONS from page 86

Used Equipment Manager Mark Johnson of General Equipment, Fargo, N.D., checks out the equipment on hand, like this Komatsu WB140. “We definitely need equipment in North Dakota,” said Johnson, referring to the oil demand being extremely high.

Tony Montano of A Montano Co. of New York thinks this JCB Vibromax VM132 might be a good buy. Roger Beck of Beck Equipment, Preble, N.Y., gives the Caterpillar 966s a good looking over.

(L-R): Arriving at the Alex Lyon & Son auction is Dick Courts (L) of Courts Machinery, Windom, Minn., and Kenny Bell of Clark Auctions, Clark, S.D. They’re enjoying the great weather and looking forward to checking out all the equipment.

A Caterpillar 980H wheel loader awaits a new owner.

Eilat Lev, president of International Tractor Co. Inc., Ardsley, N.Y., hopes to take home this Caterpillar 140H.

Atop a huge Caterpillar 992D wheel loader is Ed (L) and Joe Lewandowski of LCI, Waterford N.J. Ed said their company mainly does site and heavy highway work and were looking to pick up a grader and an excavator. They’ve also been reading CEG and attending Alex Lyon & Son auctions for years.

Of All City Recycling from Brooklyn, N.Y., Richard Bryson (L) and Chris Todino are looking at a loader, like this Caterpillar 980H and a sweeper, too, if they can. They are expanding their company and opening a new facility, so they’ll need to add equipment, said Todino.

The temperature is a little better in Florida this time of year, so Andy VanDrunen of Hollandia Environmental, Ontario, Canada, thought this would be a good place to look for equipment. Here, looks at a JCB 508 extended boom forklift.

David Jones of Swantrax Earthmoving Equipment & Spare Parts might just have traveled the greatest distance to attend the annual sale. He is from Hazelmere, Perth, Western Australia.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 89

27,8 LOTS 108 AUCTIONS 9U UNRESERVED NRESERVED PUBLIC PUBLIC YOU A AUCTIONS UCTIONS NEAR NEAR YOU Kansas Kansas C City, ity, M MO O FFort ort W Worth, orth, TX TX Chicago, Chicago, IILL Springfield, Springfield, IL IL Minneapolis, Minneapolis, MN MN Columbus, Columbus, O OH H S St. t. LLouis, ouis, M MO O Dickinson, Dickinson, ND ND El El Paso, Paso, TTX X

TThur, hur, Mar Mar 1 Thur Thur & Fri, Fri, Mar Mar 8 & 9 TThur, hur, Mar Mar 15 15 FFri, ri, Mar Mar 16 16 Wed, Wed, Mar Mar 21 21 TThur, hur, M March arch 2 22 2 FFriday, riday, Mar Mar 30 30 Wed, Wed, A Apr pr 4 Wed, W ed, A Apr pr 118 8

BUYING B UYING MADE MADE EASY EASY •S See ee iitem tem d details etails & p photos hotos o online nline •M More ore iitems tems a added dded d daily! aily! • TTest est & iinspect nspect iitems tems o on-site n-site •B Bid id iin np person erson o orr o online nline

S SELL ELL Y YOUR OUR E EQUIPMENT QUIPMENT & T TRUCKS RUCKS • Full-service Full-service cconvenience onvenience •A Any ny n number umber o off iitems tems •N No op pressure ressure ssales ales

V VISIT ISIT O OUR UR WEBSITE WEBSITE TO TO LEARN LEARN MORE MORE

rrbauction.com bauction.com | 8 800.211.3983 00.211.3983


Page 90 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wide Variety of Equipment Up for Sale as Yoder & Frey

Y

oder & Frey held its annual Florida auctions Feb. 6 to Feb. 13. The seven-day sale featured a wide array of equipment. The first day saw motorgraders, asphalt rollers and pavers, concrete equipment, sweepers and vacuum trucks go on the block. Days two through four featured rubbertired loaders, skid steers and attachments, generators, hydraulic excavators, off-highway water trucks, crawler loaders and more. Day five featured rough-terrain cranes, truck cranes, crawler cranes, pile driving equipment, bucket trucks and more. And days six and seven featured farm and forestry equipment and dump trucks and trailers. There was elbow-room only on day three when the dozer auctioning got under way.

Landon (L) and Walt Boring of Boring Equipment were in town watching over some equipment they had in the sale. Walt was happy with the results so far, claiming he was getting more from the equipment than he was asking for in his yard.

Gary Dwerlkotte (L) and Vince Mundy of Landoll Trailers provided details on their new 855C-53 trailer.

A last minute undercarriage inspection is performed as this Caterpillar dozer is run through the Yoder & Frey auction.

Peter Clark, president of Yoder & Frey, tracks the bids on day three.

This bidder takes advantage of any extra elevation he can get to track the bidding during the crawler tractor portion of the Yoder & Frey sale.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 91

Holds Successful Seven-Day Sale Florida Auction

Finding a quiet place between a couple of Caterpillar 325DL excavators, (L-R, clockwise) are Jim Oxford, Oxford Crane; Henry Dixon and Jerry Barrass, Jerry White Construction; and Shorty Travelstead, Marion Excavating, all from Marion, Ill.

These folks from the Snow Belt were happy to be in sunny Florida. (L-R): Don Keller, Keller Paving & Landscaping, Minot, N.D.; Don Schwalbach, Elderon Truck & Equipment/Truck World, Wittenberg, Wis.; and Kim and Dean Keller, also of Keller Paving & Landscaping.

Taking a break from the bidding action are James Manning (L) and Jeff Carroll of Northline Sand & Gravel, Taylor, Mich. Don and Georgia Rettman of Don Rettman Construction, Litchfield, Minn., are considering adding this Komatsu PC220LC excavator with a hydraulic hammer to their bid list.

This Liebherr 754 late model crawler generated a lot of bidding interest.

Randy Carter of Ohio Valley Reload in Kentucky gives a hug to Tina Flowers of Eager Beaver Trailers while his friend Donald House of Asphalt Services waits in the cart. Carter was interested in the new Eager Beaver 50GSL-PT.

Hanging out in their four-wheelers, waiting for the machines they’re interested in to go on the auction block (L-R) are Jesus Ramirez, Gibbs & Sons Machinery, Gadsden, Ala.; Bill Ingram, semi-retired, Marietta, Ga.; and Troy Griffin, Flint Equipment Company, Albany, Ga.

Traveling all the way from Mount Pleasant, Iowa, Karl Messer and his wife, Patti, were monitoring the prices on dozers.


Page 92 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AED Foundation Auction Benefit Raises More Than $40K

B

idding was fast and furious at the AED Foundation’s 2012 live auction benefit co-sponsored by Ritchie Bros. Auctioneers. The fifth annual live auction, which was held at the Summit in National Harbor, Md., successfully raised more than $40,000 for The AED Foundation Workforce Development Initiatives. Journalist and Fox News political commentator Tucker Carlson was the featured keynote speaker. He delivered an election analysis, mixing humorous anecdotes with firsthand insight into the issues and personalities on the national stage.

(L-R): On behalf of the association’s board of directors, Walter Berry, The Berry Companies, inducted Larry Glynn as AED’s 2012 chairman. Glynn, standing with wife Debbie, is president of CMW Equipment, a road building equipment dealership based in St. Louis, Mo.

Going, Going, Gone!! Bidding was fast and furious at The AED Foundation’s 2012 live auction benefit co-sponsored by Ritchie Bros. Auctioneers.

AED awarded Bill Sitter (C), retired owner of Jordan-Sitter & Associates, with the Distinguished Service Award during the Summit’s general session. He joined AED in 1972 and has attended approximately 35 AED annual conventions, and has contributed articles to CED magazine for some 15 years. Sitter is pictured with AED President and CEO Toby Mack (L) and outgoing AED Chairman Dennis Kruepke, who is president and CEO of McCann Industries, the Chicagoland Case dealer. U.S. Chamber of Commerce President and CEO Tom Donohue addressed attendees of the Summit’s chairman’s inaugural breakfast. AED then presented Donohue with its 2012 Democracy Award. This was the first time AED has given this prestigious award to someone outside of the equipment distribution industry. The award was given to Donohue in recognition of his tireless dedication and long support of American business.

AED kicked up the fun factor at Summit with three nights of live music from Chicago-based band Frank & Dave. Dancing, singing and tambourine playing broke out in the audience at the TGIF Party following the auction.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 93

Case’s New 650L Crawler Dozer Features 4.5 L Family IV Engine

RA

Ritchason Auctioneers, inc. “Turning Machinery Into Money Since 1989” Auctions

EST. 1989

Appraisals

Dewain Ritchason

President

23rd Annual Spring Auction

Saturday, March 17th, 2012 Lebanon, TN @ 9:00am (CT) Selling Heavy Equipment, Trucks, Trailers and Commercial Vehicles to Qualified Buyers Around the

Now Accepting Consignments Must Be Onsite by March 9th Online Bidding Provided by:

Practical for residential job sites and confined commercial work areas, the Case Construction Equipment 650L crawler dozer delivers 74 net hp (55 kW) through a four-cylinder, 4.5 L Case Family IV engine. Operating weights range from 16,250 to 17,550 lb. (7,371 to 7,960 kg). Low operating height allows the 650L to work around low overhangs, while its lighter weight is ideal for work in soft soil conditions. The short track means easier turning and maneuverability on the job site. The compact size also makes the crawler dozer easy to transport from job to job. For more information, visit www.casece.com.

Follow us on www.twitter.com/ritchason

Sales Consultant: Daniel Pruitt

(800) 806-3395 TN FIRM # 2048

TOLL FREE

(615) 444-5464

www.ritchason.com

LOCAL


Page 94 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case Crowns Triple Threat Rodeo Champion in Las Vegas Case Construction Equipment crowned the champion of its Triple Threat Rodeo series, following a day-long competition among 59 of the United States and Canada’s most talented equipment operators at the 2012 World of Concrete show in Las Vegas. Case awarded prizes with a total value of approximately $140,000 at the competition’s conclusion. Octavio Miranda, of Ancaster, Ontario, was named the Case Triple Threat Rodeo North American Champion and won a 2012 Ram 2500 truck for himself and a new Case TR270 compact track loader and a Towmaster trailer for his sponsoring company, L.M. Enterprises. Owner/operator Allan Long, of Summerhill, Pa., finished second to win a $5,000 CNH Capital rewards card. Lloyd Lesher of Casper, Wyo., finished in third place, winning $1,250 in cash for himself and a $2,500 CNH Capital Card for his sponsoring company, Andreehunt Construction. The CNH Capital Cards are redeemable for products and services at any North American Case Construction Equipment dealer. First-, second- and thirdplace finishers also received custom belt buckles recognizing their performance. Case Program Supports Habitat for Humanity Also benefitting from the Triple Threat

Owner/operator Allan Long (R), of Summerhill, Pa., receives congratulations from Jim Hasler, vice president of CNH Construction, for his second place finish in the Case Triple Threat Rodeo North American championship event. Long won a $5,000 CNH Capital rewards card, redeemable for products and services at any North American Case Construction Equipment dealer.

Rodeo program were Habitat for events each qualified to comHumanity affiliates across North pete at the championship event. America. Case presented a corpoThe local winners also received rate contribution of $5,000 to $500 in cash and Case gear. Habitat for Humanity Las Vegas at Attracting more than 10,000 the championship event, one year visitors, the local rodeo events after kicking off the Triple Threat proved successful in terms of Rodeo program with an identical competitors, overall attendance $5,000 donation. In addition, each and fundraising efforts in supparticipating Case dealership made port of Habitat for Humanity a donation to its local Habitat affiliaffiliates. ate, bringing the total raised during Combined with funds raised the program for Habitat affiliates to through earlier equipment $51,726. rodeos and other company and Miranda, Long and Lesher dealer events, Case and its dealproved their skills during the Triple ers have contributed an aggreHasler (L), vice president of CNH Construction, presThreat Rodeo Championship oper- Jim ents a corporate contribution of $5,000 to Meg Delor, exec- gate total of more than ating a Case F Series wheel loader, utive director of Habitat for Humanity Las Vegas, at the $250,000 to local Habitat for N Series loader/backhoe and Alpha Case Triple Threat Rodeo chanpoinship event, one year Humanity affiliates. Series skid steer through a demand- after kicking off the program with an identical $5,000 dona“Case and our dealers share ing course of challenges that simu- tion. In addition, each participating Case dealtership made a commitment to support the lated some of the most difficult a donation to its local Habitat affiliate, bringing the total communities in which we do applications facing equipment oper- raised during the program for Habitat affiliates to $51,726. business,” Marringa said. “We ators in their day-to-day jobs. They are proud of the many ways in earned their place among the five finalists outdoor exhibit adjacent to the Las Vegas which our company, employees and dealers who competed in an extreme test of skills to Convention Center. have responded to community needs over “The Case Triple Threat Rodeo gave the the years.” win their ranks as champion, second- and best equipment operators in North America a third-place finishers. A global, nonprofit housing organization, “We congratulate Octavio Miranda for his chance to show off the skills they use every Habitat for Humanity has served more than victory in the Case Triple Threat Rodeo day on the job,” Marringa said. “Each rodeo 500,000 families by welcoming people to Championship,” said Rob Marringa, Case event required the competitors to demon- construct, rehabilitate or preserve homes. brand marketing manager. “And we applaud strate their mastery of a variety of equipment For more information, to donate or to volunall of our competitors in demonstrating their operations, in terms of both speed and accu- teer, visit www.habitat.org. professionalism and skill as worthy repre- racy.” sentatives of their trade.” Competitors Earned Their Way World of Concrete — the largest internaFrom Field of 1,500 Operators tional tradeshow dedicated to the commerFrom a field of more than 1,500 particicial concrete and masonry construction industries — served as the backdrop for the pants who competed in Case Triple Threat Case North American Triple Threat Rodeo Rodeo events across the United States and Championship. Case hosted the event at its Canada this year, the winners of local rodeo

Octavio Miranda, of Ancaster, Ontario, was named the Case Triple Threat Rodeo North American Champion, following a day-long competition Jan. 24 among 59 of the United States and Canada’s most talented equipment operators at the 2012 World of Concrete show in Las Vegas. Miranda won a 2012 Ram 2500 truck for himself and a new Case TR270 compact track loader and a Towmaster trailer for his sponsoring company, L.M. Enterprises.

Jim Hasler (L), vice president of CNH Construction, congratulates Lloyd Lesher of Casper, Wyo., for finishing third in the Case Triple Threat Rodeo North American championship event. Lesher won $1,250 in cash for himself and a $2,500 CNH Capital rewards card for his sponsoring company, Andreehunt Construction.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 95

Get in on the action March 21, 9 a.m. Bidding opens March 16.

BUY ONLINE WITH CONFIDENCE. The most trusted name in heavy equipment brings you an online auction experience unlike any other: ƒ

TA-1 inspections

ƒ

Financing and insurance options

ƒ

Equipment Protection Plans available on qualified equipment

ƒ

Genuine Cat parts and service support

Visit www.catauctions.com for more information, and be at your desk March 21 to get in on the action.

®

Follow the new leader. www.catauctions.com

CAT AUCTION SERVICES 860 Blue Gentian Road, Suite 100 Eagan, MN 55121 855.228.2286 info@catauctions.com

CENTRAL


Page 96 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Tuscaloosa, AL Sat.,March3,2012 For:Construction,Logging, TruckTractors,Support • Dallas, TX Wed.,March7,2012 For:ConstructionEquipment, Trucks,Trailers,Attachments, Support • Boston, MA Fri.,March9,2012 For:ConstructionEquipment, Trucks,&Pickups • Manchester, NH Sat.,March10,2012 For:TelescopicForklifts, Boom/ScissorLifts,Air Compressors,SkidSteers • Racine, WI Sat.,March24,2012 For:ConstructionEquipment, Trucks,DumpTrailers • Atlantic City, NJ Thurs.,March29–Sun.,April 1,2012 For:Annual4DayConstruction, Support,Attachment,Truck& TrailerAuction • Manassas, VA Fri.,April13,2012 For:ConstructionEquipment, Attachments,Support,Trucks andTrailer • Bogota, Columbia Sat./Sun.,April21-22,2012 For:LateModelConstruction& SupportEquipment • Syracuse, NY Sun.,April29,2012 For:Construction,Lawnand GardenEquipment,Supportand Accessories • Buffalo, NY Sat.,May5,2012 For:ConstructionEquipment, Support,Tools,Trucksand Trailers • Middletown, NY Sat.,May12,2012 For:Construction,Support, TrucksandTrailers • Houston, TX DATETBA For:ConstructionEquipment, Support,TrucksandTrailers • Atlanta, GA DATETBA For:ConstructionEquipment, Attachments,Support,Trucks andTrailers RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Orlando, FL February13-18,2012 • Tipton, CA February17,2012 • Williamsport, PA February21,2012

• Phoenix, AZ February24,2012 • Kansas City, MO March1,2012 • Los Angeles, CA March2,2012 • Fort Worth, TX March8-9,2012 • Springfield, IL March13,2012 • Albuquerque, NM March21,2012 • Denver, CO March14,2012 • Chicago, IL March15,2012 • Springfield, IL March16,2012 • Minneapolis, MN March21,2012 • Salt Lake City, IT March22,2012 • Columbus, OH March22,2012 • Sacramento, CA March27,2012 • Chehalis, WA March29,2012 • St. Louis, MO March30,2012 • Dickinson, ND April4,2012 • Grants Pass, OR April13,2012 • El Paso, TX April18,2012 • Grand Junction, CO April19,2012 C ANAD A

Coming Auctions • San Bernardino, CA March24,2012 For:ConstructionEquipment

• ONLINE ONLY March21,2012 For:ConstructionEquipment

• Sacramento, CA April14,2012 For:ConstructionEquipment

• Houston, TX March29,2012 For:ConstructionEquipment

• San Bernardino, CA April28,2012 For:ConstructionEquipment

• Baltimore, MD April3,2012 For:ConstructionEquipment

• Sacramento, CA May12,2012 For:ConstructionEquipment

• Denver, CO April19,2012 For:ConstructionEquipment

• San Bernardino, CA May26,2012 For:ConstructionEquipment • Sacramento, CA June9,2012 For:ConstructionEquipment • San Bernardino, CA June23,2012 For:ConstructionEquipment • Sacramento, CA July14,2012 For:ConstructionEquipment • San Bernardino, CA July28,2012 For:ConstructionEquipment • Sacramento, CA August11,2012 For:ConstructionEquipment • San Bernardino, CA August25,2012 For:ConstructionEquipment • Sacramento, CA September8,2012 For:ConstructionEquipment

• Saskatoon, SK April18,2012

• San Bernardino, CA September22,2012 For:ConstructionEquipment

I NTE RNAT IONAL

• Sacramento, CA October13,2012 For:ConstructionEquipment

• St. Aubin Sur Gaillon, France March6,2012 • Caorso, Italy March8,2012 • Panama City, Panama March9,2012 • Ocana, Spain March15-16,2012 • Brisbane, Australia March20,2012 • Geelong, Australia March22,2012 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • San Bernardino, CA February25,2012 For:ConstructionEquipment • Sacramento, CA March10,2012 For:ConstructionEquipment

• San Bernardino, CA October27,2012 For:ConstructionEquipment

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT March10,2012 For:ConstructionEquipment • Prospect, CT April28,2012 For:ConstructionEquipment • Prospect, CT June23,2012 For:ConstructionEquipment • Prospect, CT August18,2012 For:ConstructionEquipment • Prospect, CT October13,2012 For:ConstructionEquipment • Prospect, CT December8,2012 For:ConstructionEquipment DEANCO AUCTIONS www.deancoauction.com 601-656-9768 • Philadelphia, MS Wed.-Fri.,March28-30,2012 For:Huge3-DayContractor’s Auction

G.W. McGREW AUCTION COMPANY www.mcgrewequipment.com 717-428-0922 • Online Only Fri.,February24,2012 For:ConstructionEquipment

IRAY AUCTIONS www.iraymn.com 320-968-7230 • Foley, MN Fri.,March9,2012 • Foley, MN Fri.,June8,2012 • ONLINE ONLY Fri.,July27,2012 • Foley, MN Fri.,September14,2012 • Foley, MN Fri.,November30,2012 IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINEAUCTIONS Gotowww.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • Polk City, FL February21-24,2012 For:ConstructionEquipment • ONLINE ONLY Tues.,February22,2012 For:ConstructionEquipment

• Kissimmee, FL Mon.,February20,2012 For:VirtualAuctionof ConstructionEquipmentwith DigitalPicturesandVideoina CleanIndoorFacility.Radisson ResortOrlando-Celebration.

• ONLINE ONLY Tues.,March8,2012 For:ConstructionEquipment

• Albuquerque, NM February28,2012 For:ConstructionEquipment

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

• ONLINE ONLY Thurs.,February23,2012 For:ConstructionEquipment

• Pelzer, SC Wed.-Thurs.,March28-29, 2012 For:EarlySpring

• San Bernardino, CA November16,2012 For:ConstructionEquipment

CAT AUCTION SERVICES www.catauctions.com 866-750-9432

• ONLINE ONLY Tues.,March20,2012 For:ConstructionEquipment

• Matawan, NJ Wed.,March28,2012 For:CompleteLiquidationAce Manzo,Inc.

• ONLINE ONLY Tues.,March1,2012 For:ConstructionEquipment

GLOBAL FORCE AUCTION GROUP www.gforceauction.com 877-631-0650

• Montgomery, AL Tues.-Wed.,March14-16,2012 For:ConstructionEquipment

• Brooklyn, MS Fri.-Sat.,February24-25,2012 For:EarlySpring2-DayPublic Auction

EQUIPMENT FACTS www.equipmentfacts.com 908-788-2025

• San Bernardino, CA December15,2012 For:ConstructionEquipment

• ONLINE ONLY Thurs.,March15,2012 For:ConstructionEquipment

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Sacramento, CA November10,2012 For:ConstructionEquipment

• Sacramento, CA December8,2012 For:ConstructionEquipment

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085

• ONLINE ONLY Mon.,March14,2012 For:ConstructionEquipment • ONLINE ONLY Tues.,March15,2012 For:ConstructionEquipment

MEEKINS AUCTION COMPANY www.meekinsauction.com 800-499-6560 • Greenville, NC Thur.,February23,2012 For:ConstructionEquipment andTrucks • Pembroke, NC Sat.,March3,2012 For:Ag,Landscaping Equipment,Attachments& Vehicles • Lumberton, NC Thur.,April26,2012 For:Construction,Pavingand CompactionEquipment,Trucks andTrailers NITKE AUCTIONS www.nitkeauctions.com 715-362-6162 • Wausau, WI Thurs.-Fri,April27-28,2012 For:AnnualSpringContractor’s Auction PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • Florham Park, NY Fri.,March9,2012 For:MajorPublicEquipment Auction • North Franklin, CT Thur.-Sat.,March22-24,2012 For:3DaySpringAuctionwith 1000’soflots!

• ONLINE ONLY Tues.,March22,2012 For:ConstructionEquipment

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Kissimmee, FL Mon.,February20,2012 For:ConstructionEquipment

• ONLINE ONLY Mon.,March28,2012 For:ConstructionEquipment

• ONLINE ONLY Fri.,February24,2012 For:ConstructionEquipment

• West Friendship, MD Sat.,March3,2012 For:ConstructionEquipment

• ONLINE ONLY Tues.,March29,2012 For:ConstructionEquipment

• ONLINE ONLY Tues.,February28,2012 For:ConstructionEquipment

Coming Auction page Sponsored by Reckart Logistics

• Lebanon, TN Sat.,March17,2012 For:ConstructionEquipment

STEFFES AUCTIONEERS INC. www.steffesauctioneers.com 701-237-9173 • West Fargo, ND Wed.,March4,2012 For:ConstructionEquipment • Online Only Thurs.-Thurs,March1-8,2012 For:IQBIDConsignmentEvent –AdvertiseNowtoSellYour ExcessEquipment • West Fargo, ND Wed.,March14,2012 For:Agiron60Consignment Event

UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri.,February24,2012 For:ConstructionandUtility Equipment

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat.,March17,2012 For:HeavyConstruction Equipment

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 760-731-7760 • Perris, CA Thurs.,April12,2012 For:ConstructionEquipment

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Trenton, MI Thurs.,March22,2012 For:CompleteLiquidation– ConstructionEquipment


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 97

BusinessCalendar

TUESDAY, FEBRUARY 21, 2012 – KIRBY-SMITH MACHINERY, INC. PAVING SEMINAR. KIRBY-SMITH MACHINERY, INC. 2012 Annual Paving Seminar 8:00 AM to 3:30 PM (Lunch Provided). (Please note: 7:30 AM Registration.) Seminar will include topics on Milling, Compaction 101, Paving 101, Stabilizers, Advanced Compaction and Advanced Paving. LOCATION is at the Arlington Convention Center, 1200 Ballpark Way, Arlington, TX 76011. Cost is FREE!!! Reservations Required by February 10th. Call Danelle Cochran at 214-371-7777 or 800-753-1247. GUCA Safety and Education Class Schedule – For more information on the Georgia Utility Contractors Association, Inc., 2012 1st Quarter Safety Training Schedule , you may visit their web site at www.guca.com or call the association at 404-362-9995; toll free 877-SAF-GUCA; Fax: 404-362-9211. For the 1st Quarter session, classes start February 28, 2012 and end March 30, 2012. Due to certification requirements, registration and payment must be received in advance for class participation.

AGC of America Annual Convention Registration is now open for the AGC of America Annual Convention, being held in Honolulu March 13 – 17. AGC of AMERICA is pleased to offer a wide variety of meetings, events and seminars for construction professionals that can help you improve every aspect of your business.

EVENTS LISTING: AGC St. Louis Construction Leadership Council 2012 Mardi Gras Float – “Three Little Pigs” Enjoy the excitement of the Soulard Mardi Gras Parade as you ride on the Construction Leadership Council float on Saturday, February 18th. Cost: $80 per float rider. Price includes beer, beads and a great ride on the CLC float in the famous Soulard Mardi Gras Parade!!! Limited availability on the float. First come, first served. Come out and join us for a great time!!! AGC St. Louis 43rd Annual rdConstruction Safety Awards Banquet - Thursday, February 23 More than 600 construction craftspersons, foremen, superintendents, and representatives from unions and government agencies will come together for the area’s largest construction safety event at the Orlando Gardens Banquet Center at Highway 55 and Union Road, St. Louis. PRIZES will be given away and SAFETY AWARDS will be presented to companies for having accident-free construction projects. This year also includes several PRESENTATIONS of the ZRASA – Zero Recordable Accidents Safety Award to AGC member companies that have had NO RECORDABLE ACCIDENTS for all of 2011! Please contact agccom@agcstl.org for more information. AGC St. Louis WIC (Women in Construction) Week Networking Happy Hour & Ice Cream Social On March 8th, come meet our future women in construction and provide them with information to start their careers. The Construction Careers Center’s Future Women in Construction Networking Happy Hour/Ice Cream Social will be held on Thursday, March 8th from 4:00 to 6:00 PM. This event, sponsored by the National Association of Women in Construction, Missouri Women in Trades and the Construction Career Center’s Future Women in Construction Student Committee, gives the girls at CCC the opportunity to learn about the various careers in construction from real women working in the industry. Please contact agccom@agcstl.org for more information. SAVE THE DATE! The AGC of St. Louis ANNUAL RECEPTION is Thursday, April 12th, 2012 at the St. Louis Union Station Marriott. Details will be available soon! AGC of St. Louis 2011 Chairman of the Year Congratulations to Chris Walker of Guaranatee Electrical Company on being named the 2011 Chairman of the Year! Chris served as the 2011 Construction Leadership Council Chairman. The AGC of St. Louis would like to thank Chris for his hard work and dedication this past year!

***Are you looking for a special way to say “Thank You” to your staff for a job well done this year, or to a client who has remainded loyal to your services? GiftBridge Cards provide a true means to express your appreciation. More than a “cash” card that the recipient can use for gas or groceries, GiftBridge cards offer you the chance to give a gift that will be remembered by the recipient; an experience, from taking a loved one out to dinner and a movie, to taking a much needed vacation, to pampering themselves at a Spa or on the golf course. They are easily purchased thru AGC of St. Louis’ web portal, http://agcstl.giftbridge.com. You can purchase as many cards with a range of denominations and experience types, then have them delivered to your office. Show thanks to staff or clients and your support of AGC of St. Louis by purchasing these unique experience cards from GiftBridge and give someone something they will remember you by, this holiday season. Illinois Association of Aggregate Producers 1115 S. 2nd Street, Springfield, Illinois 62704 Phone: 217-241-1639 Fax: 217-241-1641 www.iaap-aggregates.org 2012 – IAAP Grassroots Meetings Please consider attending one or more grassroots meetings in 2012 hosted by the IAAP Legislative Committee. You will also have the opportunity to meet State Senators and Representatives in attendance, as well as local county engineers, and hear about their concerns. Don’t miss these important opportunities! All meetings begin at 4 PM and end at 6 PM. All meetings begin at 4 PM and end at 6 PM on the date and location indicated below:

Wednesday, February 22 10:30 am – 2 pm - Illinois Chamber Infrastructure Council meeting with Congressmen Hultgren and Lipinksi. K & L Gates lawfirm, 70 W. Madison, Conference Center 2nd Floor, Chicago. RSVP to Gideon at: gblustein@ilchamber.org Thursday, March 1 10:00 am – TFIC Federal Affairs Committee meeting. By conference call: 877-402-9753, 6359508.

Monday, March 5 3:30 pm – TFIC State House Affairs Committee meeting. Filson/Gordon Associates in Springfield and by conference all: 877-402-9753, 6359508. 4:00 pm to 6:00 pm – IAAP Grassroots Gathering. Chapin’s Restaurant, 701 N. Liberty Street, Morris, IL. RSVP to Shawn at: shawn@hansoninfosys.com. Monday, March 12 4:00 pm – 6:00 pm – IAAP Grassroots Gathering. Candlelight Restaurant, 2200 1st Avenue, Rock Falls, IL. RSVP to Shawn at: shawn@hansoninfosys.com. Wednesday, March 14 11:30 am – 1:30 pm – TFIC State House Committee’s 3P Luncheon. Mayer Brown, 33rd Floor Town Hall Meeting Room, 71 S. Wacker Drive, Chicago. RSVP to Ryan at: ryan@tficillinois.org. $50 registration fee. Sponsorships available. Monday, March 19 4:00 pm to 6:00 pm – IAAP Grassroots Gathering. Westwood Tavern and Tap, 1385 N. Meacham Road, Schaumburg, IL. RSVP to Shawn at: shawn@hansoninfosys.com. Wednesday, March 21 2:00 pm – TFIC Steering Committee Meeting. Offices of the Illinois Chamber of Commerce, Springfield and by conference call. 877-4029753, 6359508. You may contact Jennifer Morrison for more information on the above upcoming events. Cell: 217-414-5595; Phone: 217-572-1271 and email: jennifer@filson-gordon.com. IAAP – Industrial Hygiene Sampling for Dust and Noise Class Register now for the Industrial Hygiene Sampling for Dust and Noise Class organized by the IAAP along with Tri-Con Materials, Inc. This class will take place March 20-22, 2012 at the company’s sand & gravel pit in Hennepin, Illinois. If you have any questions, you may contact Shawn McKinney, Outreach Manager, Illinois Association of Aggregate Producers, Springfield, IL at: office: 217-241-1639; cell: 217-899-5125; email: shawn@hansoninfosys.com. During each meeting the Illinois Department of Transportation’s regional engineer or senior staff member will provide unique insight regarding local road and bridge building projects as well as challenges facing illinois’ road program. You will also have the opportunity to meet State Senators and Representatives as well as county engineers and others working in the transportation construction industry and learn more about their concerns. For more information, please contact Shawn McKinney, Outreach Manager, Illinois Association of Aggregate Producers, 1115 S. 2nd Street, Springfield, IL. Telephone: 217-241-1639; Fax: 217-2411641; Email: shawn@hansoninfosys.com. 2012 – IAAP Convention – SAVE THE DATE! The IAAP’s 44th Annual Convention is scheduled for Tuesday, May 15, 2012, at the Crowne Plaza Hotel in Springfield, Illinois. IAAP Member Spring Thaw Safety Conference, March 6-7, 2012 Upcoming Spring Thaw/State Grants Safety Conference: March 6-7, 2012 at The Chateau Hotel in Bloomington, Illinois Presented by the Mine Safety and Health Administration (MSHA) and Illinois Department of Natural Resources-Office of Mines and Minerals (IDNR-OMM) at a new location in Bloomington, this annual conference promises to be very informative with topics of critical interest to aggregate miners, supervisors and safety professionals in Illinois and surrounding states. For more information, please contact Shawn McKinney, Outreach Manager, Illinois Association of Aggregate Producers, 1115 S. 2nd Street, Springfield, IL. Telephone: 217-2411639; Fax: 217-241-1641; Email: shawn@hansoninfosys.com. AGGI 2012 Aggregate Forum & Expo AGGI 2012 Aggregate Forum & Expo will be held in Charlotte, NC, March 12 – 15, at the Charlotte Convention Center in conjunction with the NSSGA Annual Convention. AGGI will co-locate again with World of Asphalt for the third year. The synergy produced by these two events has been immense, with all who participated in prior events in total agreement about the benefits enjoyed from a natural industry fit between the two shows. Be sure to inform your co-workers in the

aggregates, paving or concrete industries. Attendee registration is open for http://www.nssga.org/choice/

AGGI

2012

at

Upcoming MSHA Contests MSHA’s North Central District will be staging a mine rescue contest for underground metal and nonmetal mines, and a separate first aid contest for surface and open pit mines, quarries, plants and mills. The mine rescue contest will be held on April 3-5, 2012 at the International Union of Operating Engineers Local 150 Apprenticeship and Skills Improvement Training Facility near Wilmington, IL. This is an indoor, climate controlled facility, and it is one of the finest venues in the country for a regional mine rescue contest. The first aid contest for surface operations will be held in Duluth, MN on May 17, 2012 at a venue to be determined. Our 2011 contest drew nine 2-person teams from six mining operations. We hope to grow the contest in 2012 to include more teams from more mines throughout the Midwest region.

2012 FLORIDA Contractor Associations Meetings Postings: 2012 FTBA Construction Conference to be held March 20 and 21, 2012 - Double Tree Hotel in Orlando, FL. Location: Doubletree by Hilton at the Entrance to Universal Orlando 5780 Major Boulevard, Orlando, FL 32819. For more information please call 407-351-1000. 2012 Annual Asphalt Contractors Association of Florida Convention, June 21 to 23, 2012 at Orlando World Center Marriott, Orlando, FL. 2012 Annual Asphalt Contractors Association of Florida Convention, July 19 to 21, 2012 at UUCF Convention, The Ritz-Carlton Orlando, Grande Lakes, Orlando, FL.

COMPLETE LIQUIDATION & JOB COMPLETION AUCTION SATURDAY, MARCH 24 @ 9:30 AM RACINE (STURTEVANT), WISCONSIN NOTE: Selling from a retiring Ford/New Holland dealer: late and great construction equipment along with trucks and trailers from a top Chicago contractor. HILITES: 2 HYDRAULIC EXCAVATORS: 2006 Kobelco SK210LC, Komatsu PC100-6, 2 MOTOR GRADERS: 2008 NH G200B, 2005 NH RG200, 4 RUBBER TIRED LOADERS: 2005 Komatsu WA400-5L, 2008 JCB 416 (4x4), 2004 Volvo L70E, 2004 NH W130, 4 CRAWLER TRACTORS: 2005 Cat D5GLGP, 2003 Cat D5NXL, 2003 Komatsu D31PX-21, 2005 JD 550JLT, 3 TRACTOR LOADER BACKHOES: 2009-2008 NH B95B (4x4), 2007 NH B95 (4x4), 3 VIBRATORY ROLLERS: Cat CS563, IR SD110D, Stone PDB-54, TRENCH ROLLERS: Demo Stone TR-34, 4 RUBBER TRACKED SKID STEERS: 2006 NH LS190, 2006 NH C185, 2008 NH C175, 2006 Bobcat T250, 8 SKID STEERS: 2009 - 2008-2007 NH L185, 2007 NH L180, NH LX565, NH L555, JD 8875, Cat 246, 3 TELESCOPIC FORKLIFTS: 2007 NH M428 (cab) , 2004 Gehl DL6L-42, 2 AIR COMPRESSORS: (2) New/Unused Chicago Pneumatic CPS-185DD, GENERATORS: New Generac 17,500watt, CONCRETE EQUIPMENT: Demo MBW Blitzscreed 16273 Truss Screed, Demo Stone SB1600 Concrete Buggy, SPREADER TRUCKS: 1995 Mack CH613 (s/a), 2 VAN TRUCKS: 1999 Ford F550 (s/a), 1989 Ford L8000 (s/a), WATER TRUCKS: 1984 Peterbilt 349 (t/a), DISTRIBUTOR TRUCKS: 1996 Ford F Series (s/a), 2 FLATBED TRUCKS: 1994 Ford L8000 (s/a), Chevy (s/a), 2 DUMP TRUCKS: 1994 Peterbilt (tri.), 1990 Ford F800 (s/a), 3 SERVICE TRUCKS: 2004 Ford F650 (s/a), 2004-2002 Ford F550 (s/a), 2 TRUCK TRACTORS: 1994-1992 Peterbilt 379 (tri.), 10 DUMP TRAILERS: 1999 Hilbilt 24ft. (t/a), (7) 1998- (2) 1997 TiBrook 24ft. (t/a), TRUCK PARTS/ ACCESSORIES: (2) Power Model 325 Service Truck/ Pickup Accessory w/ 20hp Kohler gas engine- welder – generator – air compressor, SUPPORT EQUIPMENT: Demo Plate Compactors, Demo Power Trowels, Demo Edco Vacuums, Demo Edco Walk Behind Saws, Demo Edco Scarifier, Demo Edco Masonry Saw. SITE PHONE: 262-886-2778, SITE FAX: 262-886-2369 REGISTERED WI AUCTION FIRM: #223-053 Alex Lyon & Son, Sales Managers & Auctioneers, Inc. REGISTERED WISCONSIN AUCTIONEER: #1878-052 Jack Lyon online bidding available: www.lyonauction.com

DIRECTIONS: From General Mitchell Int’l Airport in Milwaukee: (approx. 20 min.), take I-94S to Exit 333, Hwy 20. Proceed to East Frontage Rd., go South to auction site on left. From Chicago O’Hare Field: (approx. 45 min.), take I-294 N to I-94 N. Proceed to Exit 333, Hwy 20E, continue to East Frontage Road. Address: 1755 S. E. Frontage Road, Sturtevant, WI 53177.

ALEX LYON & SON Sales Managers & Auctioneers, Inc. Bridgeport, NY Phone: 315/633-2944 Fax: 315/633-8010 www.lyonauction.com


Page 98 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX AIM ATTACHMENTS ...............................................................................42 ALEX LYON & SON INC RACINE WI .......................................................................................97 ALEX PARIS CONTRACTING CO INC .....................................................9 ALLIED CONSTRUCTION PRODUCTS .................................................37 ALTORFER CAT ......................................................................................33 AMERICAN STATE EQUIPMENT............................................................11 ARING EQUIPMENT CO INC....................................................................8 BARGAINS..........................................................................................82,84 BOBCAT CO .......................................................................................60,60 BODINE MFG ..........................................................................................30 BOMAG AMERICA'S INC ........................................................................75 CASE CONSTRUCTION ....................................................................38,38 CAT AUCTION SERVICES ......................................................................95 CEG SCALE MODELS ............................................................................14 CLASSIFIEDS..........................................................................................83 COMPANY WRENCH ..............................................................................56 CONSTRUCTION EQUIPMENT GUIDE CEG WANTED..................................................................................85 TARGETED EMAIL ...........................................................................66 IN PRINT OR WEB ...........................................................................80 SKID STEER LOADERS & ATTACHMENTS....................................22 CUSTOM MADE PRODUCTS .................................................................26 DOMINION EQUIPMENT PARTS............................................................40 DYNAPAC ................................................................................................71 EFFICIENCY PRODUCTIONS INC .........................................................18 ERB EQUIPMENT ...................................................................................17 FABCO EQUIPMENT INC .........................................................................7 FABICK CAT .......................................................................................15,29 FINKBINER EQUIPMENT CO .................................................................11 FLANGE LOCK ........................................................................................18 GEHL .......................................................................................................64 GENSCO EQUIPMENT CO LTD .............................................................40 GOMACO CORP .....................................................................................78 HITACHI MFG ..........................................................................................41 HOWELL TRACTOR & EQUIPMENT CO ........................................81,100 HYDRAULICIRCUIT TECHNOLOGY ......................................................49 HYUNDAI CONSTRUCTION EQUIPMENT ............................................55 ILLINOIS TRUCK & EQUIPMENT .............................................................3 INDEXATOR........................................................................................24,59 IRAY AUCTION ONLINE AUCTION............................................................................87 IRON PLANET POLK CITY FL ..................................................................................99 JCB INC ...................................................................................................63 JFW EQUIPMENT INC ............................................................................72

JJ SCHECKEL CORP.........................................................................18,81 JOHN DEERE ..........................................................................................51 JOHN DEERE SKID STEER ...................................................................65 KASI INFRARED CORP ..........................................................................76 KOBELCO...........................................................................................48,48 KOMATSU AMERICA CORP ..............................................................20,56 KPI-JCI.....................................................................................................26 KUBOTA...................................................................................................42 KUBOTA SVL ...........................................................................................67 LANDOLL CORP .....................................................................................25 LBX ..........................................................................................................58 LEEBOY...................................................................................................77 LIQUID ASSET PARTNERS LLC.............................................................93 M ADAMS EQUIPMENT CO....................................................................19 MAULDIN PAVING PRODUCTS..............................................................73 MB AMERICA INC ...................................................................................13 MCCANN INDUSTRIES INC .....................................................................6 NATIONAL TRACTOR PARTS ................................................................81 NPK CONSTRUCTION EQUIPMENT INC ..............................................43 NUSS GROUP .........................................................................................23 OKADA AMERICA....................................................................................49 PALADIN HEAVY CONSTRUCTION .......................................................39 PATTEN TRACTOR & EQUIPMENT CO...................................................2 PRO-TEC EQUIPMENT...........................................................................26 PURPLE WAVE INC ................................................................................87 RDO EQUIPMENT CO ............................................................................53 RDO EQUIPMENT/SCHARBER EQUIPMENT .......................................12 RECKART LOGISTICS INC.....................................................................96 RITCHASON AUCTIONEERS LEBANON TN ...................................................................................93 RITCHIE BROS AUCTIONEERS.............................................................89 ROAD BUILDERS MACHINERY ..........................................................6,27 ROLAND MACHINERY INC ......................................................................5 ROSCO MFG CO ....................................................................................72 RUDD EQUIPMENT CO ..........................................................................28 SOUTHEASTERN EQUIPMENT CO.......................................................33 STAR EQUIPMENT LTD............................................................................6 SUBURBAN CHEVROLET ......................................................................31 TAKEUCHI ...............................................................................................45 TOKU AMERICA ......................................................................................56 VERMEER SALES & SERVICE ..............................................................30 VOLVO COMPACTION ............................................................................76 VOLVO CONSTRUCTION EQUIPMENT.................................................50 WEST SIDE TRACTOR SALES ..............................................................30 WIRTGEN AMERICA ...............................................................................79 YANMAR AMERICA.................................................................................47

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 18, 2012 • Page 99

Register to bid today at IronPlanet is a registered service mark of IronPlanet, Inc. in the United States and other countries. All other trademarks are the property of their respective owners. Auction Business License #AB3127. Go to www.ironplanet.com for details on buyer transaction fees.


Page 100 • February 18 , 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


Midwest #4, 2012  

Midwest #4, 2012

Read more
Read more
Similar to
Popular now
Just for you