January 2024 Component Manufacturing Advertiser Magazine

A #

294

The

January 2024 #16294

Component Manufacturing dverti$ dverti $ er

Serving the Structural Building Components Industry

Inspiration to Feed The Beast! in 2024 Cover story by LimTek Solutions

New ways to equip you for success.

© 2024 Simpson Strong-Tie Company Inc. M-T-BCMC23

The business of construction has never been more challenging. That’s why Simpson Strong-Tie keeps working to develop new solutions. Focused on customers, we’re constantly exploring innovative ways to support component manufacturers. Our truss connectors have become the industry standard. Our design and management software streamlines operations. And now, with advanced, automated cutting equipment, we’re bringing even more powerful tools to sharpen your edge. From ultra-precise component machines by Hundegger to brilliantly simple cutting and marking technology with EasyFrame, we’re fully equipped to keep you moving ahead.

Build your business with all the right components. To learn more, visit go.strongtie.com/componentsolutions or call (800) 999-5099.

Integrated Component Solutions | Products, Software and Service for Smarter Building

A

The

Component Manufacturing dverti$ dverti $ er

Serving the Structural Building Components Industry

Inside

Articles 6 Anna Stamm – Advertiser Forum: Leaping Into the New Year

10 Joe Kannapell: Floor Truss Technology, Part VIII: Inside Floor Truss Details

17 Wendy Boyd – Spida Machinery:

Welcoming a New Year of Partnerships with Spida

24 Todd Drummond Consulting, LLC: Mistake-Proof Your Process with Must-Have Communication Features

33 Glenn Traylor:

How Should We Select a 3rd Party Quality Assurance Program?

64 Valerie Hansen – BuyMetrics:

Creating Your Own Commodity Market Performance Measures

72 Thomas McAnally – The JobLine:

Navigating Productivity Improvement Programs: The Vital Role of a Change Agent

80 Geordie Secord – Design Connections: Where Does the Responsibility Lie?

88 Craig Webb – Webb Analytics:

The Year in People: 4 of LBM’s Top Placement Firms Assess a Tight Market

94 MiTek Staff:

Floor Truss Splicing

42 Edmond Lim, P.Eng. –

100 Paul McEntee – Simpson Strong-Tie:

51 Tim Grahn – Panels Plus:

132 Joe Kannapell – The Last Word

LimTek Solutions: Inspiration to Feed The Beast! in 2024 Implementing Continuous Improvements at Panels Plus

59 Carl Villella – Acceptance Leasing: What You Can Expect in 2024

Developing High-Capacity Tension Straps for Mass Timber Engineering Serving the Most Deserving

EVERY CUT COUNT MAXIMUS ® High-Volume Precision Crosscutting with Integrated Package Aligner and Loop Bander

AUTOCUT ®

High-Volume Automated Crosscutting with programmable PLC Controls

SELECUT ®

High-Volume PET and Market Premium Length Crosscutting with Integrated Power Package Squeeze

TRANSCUT ® II SERIES

Portable Saws priced from $8,990*

Stationary Systems priced from $31,999*

holtecusa.com

Designed to cut whole bunks of lumber to length in less than 60 seconds with an accuracy of +/-1mm (.040”) and leave a planer finish. * It's that simple. *Specifications and prices are subject to changes without notice and results are based on HOLTEC installed V-Series systems using Scratcher® chain technology.

Proper maintenance is essential for accuracy and longevity of cutting components and your results may vary. Photographs may show systems with optional accessories. All trademarks are the property of their respective owners. ©2023 HOLTEC USA Corporation. All rights reserved.

A

The

Component Manufacturing dverti$ dverti $ er

Advertisers

Sections

Serving the Structural Building Components Industry

Inside

New & Used Equipment Saws ................................................................................................ 7 Truss Equipment ............................................................................62 Panel Equipment ............................................................................73 Trucks & Trailers ...........................................................................97 Misc. Equipment ...........................................................................99 Modular Manufacturing .............................................................105 Door | Stair | Window Equipment ................................................107 Safety First ............................................................................................111 Calendar of Events ...............................................................................112 Industry News .........................................................................................118 Directory .................................................................................................128 Hiring Zone ............................................................................................130

4Ward Solutions Group ...................................................................... 15,113 Acceptance Leasing & Financing ................................................... 13,57,59 Acer, Inc .............................................................................................. 52,96 All Points Technical ............................................................................. 37,93 Alpine ................................................................................................... 20,84 BuyMetrics ..................................................................................... 41,64,65 Clark Industries, Inc. .............................................................................. 8,68 Eagle Metal Products ............................................................................ 14,48 Eide Integrated Systems, LLC | ProCut, LLC ..................................... 28,70 Element Equipment .............................................................................. 36,49 EstiFrame Technologies ...................................................................... 40,114 Fitzgerald Group ........................................................................................ 77 HOLTEC USA ....................................................................................... 4,69 Hundegger USA ........................................................................ 9,45,77,106 LimTek Solutions ......................................................................... 1,22,42,56 MiTek ............................................................................................ 12,94,131 Panels Plus ................................................................................ 50,51,87,92 ROGworx Automation ......................................................................... 54,55 Simpson Strong-Tie .................................................................. 2,60,100,118 Spida USA ..................................................................... 16,17,38,62,66,82 The Hain Company .................................................................... 9,67,79,106 The JobLine ............................................................... 65,72,79,80,93,105,115 Timber Products Inspection .............................................................. 32,110 Todd Drummond Consulting, LLC ...................................................... 23,24 Triad | RUVO | Merrick Machine ......................................... 76,83,108,134 Vekta Automation ................................................................................. 30,46 Wasserman & Associates .................................. 7,21,53,57,63,71,74,75,78, 87,90,93,98,104,105,107,109 Wolf X Machina ..................................................................................... 65 Wood Tech Systems ......................................... 13,19,21,27,29,37,39,45,47, 58,61,67,73,77,79,85,91,93,103,107,109

Published Monthly Publisher Thomas McAnally twm@componentadvertiser.org

Editor Anna L. Stamm 800-289-5627 x 3 anna@componentadvertiser.org

Distributed FREE Via e-mail subscription Download PDF or Read on line at www.componentadvertiser.com News of Interest and Advertising inquiries can be submitted to: anna@componentadvertiser.org An Open Forum for many sources.

Deadline 20th of each month.

Articles, Trade Names, and Logos are the property of their respective owner or creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. Permission to use content is the responsibility of the contributor including permissions to use any likeness of persons.

The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional.

Believe it at your own risk!

Copyright 2008-2024

Component Manufacturing Advertiser The

Advertiser

7586 Becks Grove Road Freetown, Indiana 47235

no reproduction in whole or in part without permission from the component manufacturing advertiser Archive Copies Availabl On Line www.componentadvertiser.com

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

Advertiser Forum

January 2024 #16294 Page #6

Leaping Into the New Year Anna L. Stamm Director of Communications and Marketing Component Manufacturing Advertiser.

A

re you ready for the Leap Year? That’s right, 2024 will bring us one extra day! Instead of 24/7/365, it will be 24/7/366. Have you considered what you will do with your extra day?

Imagining a Free Day Granted, our ordinary lives will not be suspended so that we can claim February 29 as a completely unencumbered 24-hour span. But, imagine if it were. Imagine if you didn’t have work and other commitments that day. Imagine that it wasn’t simply going to be another Thursday in February. Now, what would you do with that free day?

Planning for Your Free Day Even though we can’t claim February 29 as our free day, we can still use it to consider our options. With February 29 as our motivation, we can ask ourselves what we would really like to do if we had the ability to claim a day for ourselves without any outside obligations.

If you had an entirely free day, what would you do with it? Would you want to travel somewhere?

If so, would it be someplace you’ve never been or someplace you’ve always loved? Would you want to spend your day alone in the quiet or surrounded by as many friends as you could muster?

Would you use it for a favorite sport/hobby/activity or would you try something you have never done before?

More Than Wishful Thinking Whether or not we can do anything we want on one particular day, we should still allow ourselves the time to think about our options. Call it hope or aspiration or simply wishful thinking—what matters is that we keep dreaming about what we might like to do. Imagining something is the first step toward making it happen.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #7

Adverti$$er

NEW SAWS! NEW!

NEW!

NEW! Monet DeSauw DeRobo Linear Saw

Monet DeSauw FWA 500 Floor Web Cutter • • • • • •

• • • • • • • •

Push Button Powered Blade Angulations Single Push Button Setting for 2 Blades per Side Electronic Digital Readouts Backup Mechanical Indicators Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber 12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) 60 Pieces per Minute (4) Internal 16” Blades & (1) External 16” Cut-Off Blade Pneumatic Blade Brake on External Blade Dust Hoods Belt Waste Conveyor (under saw) Add $4,200 for 12’ Incline Waste Conveyor (adjacent to saw) Add $1,900 for Extra Set of Blades 480 Volt / 3 Phase FOBMO Call For Pricing

•

• • • • • • • • • • • • •

Automated (Truss Design Software Download) or SemiAutomated (Touch Screen Entry) Operation All Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data 22” x 40 Tooth Blade on PAE Cut 1 or 2 Boards up to 20’ (2 Second Plunge Cut) Cut Chords, Webs, Rafters, Wedges & Stair Stringers Cut Long Scarfs by MultiPlunging Servo Positioning on Infeed, Angle & Outfeed Pusher Over Travel Protection Ink Jet Printer Lumber Optimization Program Belt Waste Conveyor 480 Volt / 3 Phase / 60 Amp Includes 5 Day Onsite Installation & Training Optional Monet DeSauw Live Deck, Bunk Feeder & Incline Belt Waste Conveyor FOB MO

Call For Pricing

Monet DeSauw DeSawyer 2000 Automated Saw • • • • • • • • • • • • • • • • •

Touch Screen User Interface with Backup Mechanical Controls 3 Operating Modes: Auto, SemiAuto & Manual All 20 Axes of Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data Anti-Collision & Optimizing Programming Auto Calibration Productivity & Time Tracking Maintenance Diagnostics Variable Speed Conveyor (0-50 Flights per Minute)with Powered Hold Downs (1) 30” x 80 Tooth Blade (27 3/4” Scarf on PAE) (4) 16” x 40 Tooth Blades (13 1/2” Scarf on Centerline) Pneumatic Blade Brakes on all 5 Blades 16 1/2” to 20’ Length Capacity (11” Minimum on Square End Blocks) Vibrating Waste Conveyor Under Saw 480 Volt / 3 Phase Includes 4 Day Onsite Installation & Training Add $2,900 for Extra Set of Blades Optional Live Deck, Label Printer, Ink Jet Printer, Catcher Display & Incline Belt Waste Conveyor.

Call For Pricing FOB MO

Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

CONSIDERING EQUIPMENT? CONSIDER CLARK. EZ-SET AUTO JIGGING EXCLUSIVE & PATENTED DESIGN Automatic Truss Jigging System to drastically reduce setup times.

Allows for 100% embedment on the table, with top & bottom chord pucks in the same slot. TopSider or standard configurations available for conventional kick-leg, walk-thru, or our new trackless 8' and 10' continuous table systems. Systems for other roller & hydraulic gantries are coming soon. Available in new machine installations or for retro-fitting your existing table. The TopSider is exclusively applicable for “kick or flip leg” style truss presses such as the Tri-Axis & Lumbermater® Lumbermater® is a registered trademark of Illinois Tool Works, Inc., or ITW.

FEATURES / APPLICATIONS • Capable of 100% On-Table Nail Plate Embedment • Two Pucks Per Slot • 24", 26", and/or 30" Spacing • Compatible with all current major design software • Multiple Simultaneous Layouts LOCAL 417-235-7182 • US TOLL FREE 800-743-9737 WWW.CLARK-IND.COM / GENERAL@CLARK-IND.COM

EQUIPMENT FOR TRUSS & COMPONENT MANUFACTURERS

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #9

Work Smarter

2 Seconds That's all the time it takes

to drill studs for running Romex or other electrical wire in the wall panels

Motor: Heavy Duty 5 HP - 3 phase - 220v or 440 v (Please specify when ordering) Motor carriage bearing and spindle assembly mounted on Blanchard ground steel plate Lineal motion is hardened and ground V bearings and rails Block Sizes: 2 x 4 through 2 x 12 infinite height setting to center Air Supply: 100 psi 10 CFM Drills: 2 wing 3/4'” Carbide Tipped can accommodate smaller or larger Spindles: Alloy Steel polished and ground precision shafting Frame: 2" Steel With Powder Coat Finish Covers: 10 Gauge (1/8" Thick) Aluminum removable Dimensions: Height - 60 inches, Width - 33 inches, Depth - 33 inches Shipping weight: 750 lbs. - (Including crate) MADE IN AMERICA BY AMERICANS

See the Stud Driller in action!

Go to https://youtu.be/AnODX5vPesE for a demonstration

916-508-3558 • www.thehaincompany.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #10

Floor Truss Technology, Part VIII: Inside Floor Truss Details

By Joe Kannapell

B

uilders have been testing the viability of floor trusses, and they are now considering the results. Many of them switched from I-joists only because they were forced to do so. Either they couldn’t get them, or they didn’t want to pay double the price. Yet today, as they are seeing the increased availability and softer pricing of I-joists, will they stay with trusses? Did they experience enough advantages? Now is the time to solicit feedback from the field and to highlight the gains realized.

While the open web advantage of trusses has been partially offset by the holes being drilled into I-joists, trusses are easier to connect, they make better use of material, and they are amazingly adaptable to jobsite conditions.

Ease of Connectivity: A regional builder switched a townhouse job from I-joists in June 2023, built several buildings with trusses in the summer and fall, and was framing the 20th unit on a 22° winter morning. Each unit contained two levels of floor trusses framing into an LVL stair beam, which was, in turn, carried by a girder truss. The plies of the girder were easily tied together with FTC clips. However, after installation, their connection didn’t look much different than the doubled I-joists in earlier units. However, not visible in those units was a 2-1/8” wide filler member almost twenty feet long that was supposed to be nestled between the doubled I-joists and attached from both sides with an onerous number of nails. In addition, the framer benefitted, especially in the cold weather, from the simpler LVL to girder connections and the hanger-less top chord bearing details elsewhere on the job.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #11

Material Optimization: Rarely emphasized is the advantage derived from trusses being custom-designed to optimize the use of materials. In general, truss lumber grades and cross sections can vary considerably along their span, to best resist design stresses. In this example, expensive DSS-grade material is only used in part of the bottom chord while less expensive #1 and #2 grades are used on the remainder of the chords. If an I-joist were substituted, the entire length of both the top and bottom flanges would need to have expensive material (usually LVL). In addition, the use of a partial double chord greatly strengthens this single-ply girder, while I-joists in this situation would have to be doubled, adding more cost and handling labor to the job.

Another considerable advantage of special truss design details is the use of short blocks derived from culls and off-fall. In the above truss, for example, twelve short blocks are utilized, and they were essentially “free.” I recently visited a large truss plant in Texas that installed a floor truss machine simply for the purpose of consuming the scrap generated from their two roof lines. In another large roof truss and wall panel plant in Maryland, so much scrap is generated in the roof truss shop that they can send pallets of short blocks to jobsites that might be better used in a floor truss operation.

Another example illustrates the advantage of customized truss design, in this case to provide for a drop in the floor deck, for either an entry into a handicapped shower or for a flush fireplace hearth. To frame this condition with I-joists (or solid wood joists) would require special designs and an extensive amount of hand-framing.

Adaptability: One final example recaps how the shape of trusses can be adapted to minimize additional jobsite framing. As shown, accommodation for two different bearing elevations can be built into the truss, while also providing a raised and narrowed cantilever soffit detail. No other product or system can come close to this adaptability.

As inventor Jack Schmitt observed in 1970 about floor truss construction, “Suitable lumber for this purpose is relatively inexpensive and difficult to obtain.” And today we might add, “and can be easily connected, optimally incorporated, and ideally shaped for the job at hand.” While builders may be attracted by reductions in I-joist pricing, they continue to seek alternatives to minimize the risk of being held hostage again by a handful of EWP producers.

Next Month: Floor Finale

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Helping Builders Save Time + Reduce Costs Increase the value of the advanced component package you provide to builder customers with open web floor trusses.

Builders who partner with their component manufacturer to design their builds using floor trusses can gain efficiencies in shorter cycle times and reduced waste compared to I-Joists.

Are you ready to help builders design for floor trusses from the start?

Talk to a MiTek Representative to get started.

MII.COM/ FLOOR-TRUS S

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #13

SAWS

NEW!

2004 Omni Miser Saw • Model RTWF (Automated Rood Truss & Wall Panel Cutting Saw) • 5 HP Motor with 16" Blade (cuts 2x3 through 2x12 up to 16' in length) • Ink Jet Printer (Two Faces) • Incline Live Deck • 6 Magazine Feeders - (3) 2x4 and (3) 2x6 • Bunk(Bulk) Feeder • Computer with Enclosure & Stand • Incline Waste Conveyor • Spare Parts • Grizzly Dust Collector • 480 Volt / 3 Phase • Magazine Feeder #1 does not work • Currently has length/angle accuracy issues on about 10% of the cuts • Video available upon request $15,000 NOW $11,500 FOB WI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

MANUFACTURERS’

Safety Speed Manufacturing Model 7400 XL Panel Saw Safety Speed Manufacturing, model 7400 XL*, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 1/8" maximum thickness, accuracy within 0.005 inches, 13 foot long welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include digital readouts for vertical cuts, automated length measuring, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00). $14,499 Base, FOB MN. Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Start smarter...

Grow faster...

Achieve more...

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108

Phone: 412-262-3225 Fax: 412-262-1154

NEW!

New Monet FWA-500 AC Automated Floor Web Saw Price Based on Configuration FOB MO Additional Information Here PHONE: 800-289-5627

Now offering short term Working Capital Loans

REPRESENTATIVES

NEW!

765-751-9990

“Serving the Component Industry Since 1996”

www.woodtechsystems.com

Safety Speed Manufacturing Model 6400 Panel Saw Safety Speed Manufacturing model 6400 vertical panel saw, 3 HP worm drive motor, 64 inch crosscut, 1 3/4" inch maximum thickness, accuracy within 1/64th of an inch, 10 foot welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include lower frame extensions, digital readouts, laser guide, stop bar, vacuum and midway fence. 120 volt. Starting at $5,799 FOB MN.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

THE NEWEST PANEL DESIGN PLATFORM AVAILABLE

TRUEBUILD ® LAYOUT WITH PANEL DESIGN FUNCTIONALITY WAS WRITTEN FROM THE GROUND UP TO DELIVER COMPLETE MODEL CONTROL TO PANEL DESIGNERS. Learn More About Our Wall Panel Functionality at EagleMetal.com

#TIMETOBUILD

EMPOWERING GREAT COMPONENT MANUFACTURERS

4W

THE

-AUTOMATIONRACE IS ON. ARE YOU READY?

EMBRACE THE FUTURE OF MANUFACTURING WITH SWIFT AND EFFICIENT ADOPTION OF THE NEWEST TECHNOLOGY, LED BY THE INDUSTRY EXPERTS!

BOOK YOUR 4WARD AUTOMATION ASSESSMENT TODAY. CONNECT WITH OUR EXPERTS 4WARDSOLUTIONSGROUP.COM

Mike Ruede Jr.

Automation & Robotics Specialist mike@4wardconsult.com 951.297.0085

Tomasz Cwik

Automation & Robotics Specialist tomasz@4wardconsult.com 313.513.1630

Choose the Tornado M500 for efficiency This Linear Saw automatically feeds, cuts, prints and ejects wall frame components - handling 20ft lengths, stacked 3 high.

+

SPEED

ACCURACY

EASE OF OPERATION

INCREASED PRODUCTIVITY

Boost your output with the Tornado M500, the most cost-effective addition to your plant.

E sales@spida.com

T +1 866 647 7771

spida.com

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #17

Welcoming a New Year of Partnerships with Spida

By Wendy Boyd Chief Customer Officer Machinery Group Spida Machinery

A

s I sit here thinking about what the New Year will bring for Spida Machinery, I send our warmest gratitude to those customers who became our machinery partners in 2023. I can now bid farewell the challenges of the past 12 months and welcome the promise of a fresh start and new opportunities in 2024.

In the true spirit of reflection, I’d like to express how much we appreciate the trust and partnership we’ve embarked on together throughout the last 12 months.

Loyalty and support have been the cornerstone of our success, and we are truly thankful for the privilege to supply machinery into so many factories this past year.

As we embark on this new year together, with renewed hope for the building industry, we are excited to share our ongoing commitment to enhancing your experience with Spida. Our team is dedicated to innovation, quality, and exceeding your expectations. In the coming months, you can look forward to the “Grand Opening” of our new factory in Jacksonville, Florida. We also have several new staff to introduce to you, as well as some existing staff from Australia and New Zealand making the USA home from 2024. Such exciting times for us all here at Spida.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #18

Peter Whiteley, our new Service Manager here in the USA, comes to us with over 30 years of experience in Australia – he is spearheading our Service Team to give you the personalized service and unwavering reliability that can only be achieved by a dedicated machinery company. Machinery maintenance, supply, and installation is part of Peter’s DNA and his experience speaks volumes to the success of this part of the Spida business. He is motivated by his belief that your success is our top priority, so please don’t hesitate to call Peter for your servicing and support requirements.

Here at Spida, we understand that our success is intricately linked with yours. Our New Years resolution is simple: Continue to support our customers’ goals and aspirations and contribute to the growth of their businesses by supplying the most robust and innovative machinery possible. Whether it’s cutting-edge solutions, personalized service, or unwavering reliability, we are here to ensure your success remains our top priority.

May the coming year present you with countless opportunities for growth and greater market share. May the building industry be buoyant and strong and give us all the opportunities for success.

Thank you for choosing Spida as your machinery partner over the years, and for those who haven’t talked to us about your machinery requirements, please be in contact so we can be your partner on this exciting adventure.

Wendy

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

4,001,398 That’s the total trigger count from all six nail guns combined on an installed Terminailer.® For a machine that was a little over two years old, that is a big number; a real tribute to the durability of the machine’s components and engineering.

Yes, that number represents a pretty darn impressive mechanical milestone to be sure, but what is really impressive is that human hands were saved from millions of repetitive motions and potentially costly nailing accidents.

With just a sole operator, Terminailer drives a whole lot of improvement in efficiency and output. This amazing sub-component assembler quickly and precisely drives 30% to 70% of the framing nails in any wall panel job—be it batch, or just–in–time production.

All with no complicated training, software or set-up time required when switching configurations. Add increased safety and easy maintenance with off-the-shelf parts, and you can see why Terminailer should be driving greater productivity in your plant.

Terminailer® and Terminailer XP Put things together like never before.

w w w. T E R M I N A I L E R . c o m 7 6 5 - 7 5 1 - 9 9 9 0 Terminailer ® is a registered trademark of Construction Industry Innovations, LLC Copyright 2023 All Rights Reserved

IntelliVIEW Suite Manage. Design. Build.

The industry’s most powerful integrated component design, engineering, and management software for steel and wood-framed structures. iCommand Manage projects, customers, materials, pricing & inventory

iModel Design truss layout & profiles

iDesign Optimize material usage & engineer trusses

iPanel Design wall layouts, panelize, bundle, break & stack

eShop Maximize crew productivity & improve manufacturing efficiency

The IntelliVIEW Suite is a fully integrated software solution for the layout and design of a building’s rough framing elements—including roof and floor trusses, wall panels, solid sawn, EWP, sheathing and various ancillaries.

The IntelliVIEW Suite provides the industry’s most complete analysis of the design, cost information and bill of materials—promoting increased profits by reducing plate and lumber use.

Ask those who know. They’ll tell you about the people at Alpine who make a difference.

BUILD MORE. alpineITW.com | 800.521.9790

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

Equipment Wanted!

Saws

Trucks & Trailers

•

• •

Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters

Truss Equipment • • • • • • •

Roller Gantry & Hydraulic Press Systems Finish Rollers Truss Stackers Floor Truss Machines Lumber Splicers Jack Tables C-Clamp Presses

January 2024 #16294 Page #21

NEW!

Stretch Roll-Off Trailers Gooseneck Roll-Off Trailers

Modular Equipment •

Pacific Automation or MiTek Mobile Home Press

Contact Wasserman & Associates for a Fair Market Value Assessment of your Used Equipment Operational, Needs Work, and Parts Only equipment will be considered!

800-382-0329 | www.wasserman-associates.com SAWS

Terminailer XP Price: $224,000 FOB: MN

Don’t just do it, nail it. It’s a brand new day in wall-panel production, with a whole new way of doing things better.

Terminailer®, a revolutionary, event-driven, nailing machine that completely defies any preconceived notions about sub-component assembly.

Terminailer all but shatters the stereotypical myth that subcomponent equipment is essentially peripheral – unimportant. And it does so by quickly and accurately driving far more framing nails in your wall panel jobs than ever before. Whether in your shop or in the field, one operator sets the pace for production and quality. And that reduces labor costs and other aspects of overhead.

2006 Alpine Speed Rafter Cutter Simplified compound cutting for hip, valley and jack rafters (double & single compound cuts) • Two Worm-Drive Circular Saws (110 Volt / 30 Amps) • Saw Turntable (for angle cutting) • Saw Carriage (for up to 45 degree bevel cutting) • Infeed & Outfeed Roller Conveyor with Stands $4,900 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com •

A

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Whirlwind Model 1000 Cut-Off Saw • 5 HP Motor with 14" Blade • 2 3/16" x 8 1/4" Capacity • Pneumatic Blade Guard/Lumber Clamp • Foot Pedal Control • Dust Collection Outlet • 460 Volt / 3 Phase • 1 Left Hand & 1 Right Hand Model Available $3,500 NOW $2,800 Each FOB NC Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Terminailer is an event-driven, sub-component assembler that will quickly and accurately drive 30% to 70% of the framing nails in any wall panel job. In your shop or in the field, one operator sets the pace for production and quality. The Terminailer functions independent of design software, requires zero set-up time when switching between any configuration, and requires no special operator training.

The Terminailer is easy to move around the shop so it’s location can evolve as your shop evolves. With all of the nailing occurring in the closed main chamber, nail injuries and nail location miss-fires are eliminated, making your plant that much safer.

With nearly ten years of development from people that know machinery it is assembled to exacting standards, well supported, and it is easily maintained with shelf-item parts. Terminailer: vetted, tested, and ready to drive maximum productivity for you. Be sure to check out our videos below for a quick review of this revolutionary machine!

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

One month after installing a Double Lumber PickLine to feed two TCT Linear Saws: "We are getting 3,000 to 5,000 bdft more each saw, than we were getting before the install.

We have shut down one Cybersaw and one TCT chord saw.

This equals about 3 less people 10 hours, and 2 less forklifts 10 hours.

Overall, it is a major improvement to our operation. We hope to have the chance to run it two shifts to further accelerate the payback.”

Tom Hollinshed, Owner

LimTek Solu�ons Inc.

6021 Yonge St., Unit 1019 Toronto, ON M2M 3W2 Tel: (416) 888-4457

Edmond.Lim@LimTekSolutions.com Edmond.Lim@LimTekSolu�ons.com

LimTekSolu�ons.com

Confront 2024 Challenges with a Modest Investment in Process Improvement for Enhanced Performance, Ensuring ROI Retention and Improvement The Most Advanced and UpͲtoͲDate Lean Process and Industrial Engineering Methods to Significantly Improve: ✓ Productivity ✓ Quality ✓ Employee Issues ✓ Net Profits All Areas Ͳ Manufacturing, Sales, Design, and Admin.

All Things Being Equal, a Gain of Three Net Profit Points is a Low Bar for TDC. A Gain of Only One Point Would Easily be 10x the TDC Investment for Most Companies All Departments Ͳ Sales, Design, Manufacturing, and Admin ✓ Proven and Practical Process Improvement with Lean Manufacturing based on Refined Industrial Engineering.

✓ Proven Best Practices Based 100’s of Client Practices. ✓ Increase Overall Productivity in all Departments. Not Just the Manufacturing Area. ✓ Achieve Real Labor Reduction Costs Per Sales Dollar. ✓ Proper Productivity Incentive Programs for All Departments. ✓ Reduce Mistakes and Improve Quality.

Equipment and Building Design Recommendations ✓ Material Flow, Equipment, and Building Design. ✓ Unbiased with Absolutely No Referral Fees. ✓ Too Many Vendors have Suggested Costly Facilities and

Equipment Choices with Significant Constraints that Could have been Avoided with TDC.

Time Standards Development ✓ Productivity Scheduling, Efficiencies Measurement,

Productivity Incentive Programs, and Labor Cost Estimations.

✓ Units based on Work Minutes, R.E., or S.U.

Keith Myers—Truss and Panel GM, Lakewood, NJ “….Your time standards are perfect. They are far more accurate than BF. We are much more comfortable with the MM for estimation of labor for both the pricing and shop scheduling. BF is just too unreliable for our needs.”

20+ Years of Fulltime Consulting Services 35+ Year Truss & Wall Panel Component Industry Veteran with 100's Clients

www.toddͲdrummond.com

todd@toddͲdrummond.com

Brad Emmert—President Brazil, IN “…. Todd’s services included plant efficiency, design efficiency, better organization, man minutes per truss type, and more. …. Just implementing a few of Todd’s suggestions will more than pay for his services in a short amount of time. ….”

Shane Soule—President Bremen, IN “….It was an investment well spent because I not only learned a completely different way to view labor metrics, but I came out of it with a completely different mindset on pricing, scheduling, and staffing. ….”

Read Dozens of Client Testimonials (Link)

(603) 748Ͳ1051

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #24

Mistake-Proof Your Process with Must-Have Communication Features Todd Drummond

L

a s t m o n t h ’s a r t i c l e , C o n t i n u o u s Improvement (Kaizen) for Enhancing Performance to Ensure ROI Retention, is a natural lead-in to Poka-Yoke. In lean terminology, roughly translated from Japanese, Poka-Yoke means to mistake-proof the process. A more accurate translation could be “inadvertent error prevention.” In a nutshell, one tries to make any process bulletproof so that inadvertent errors are not created because the system process is simplified and does not allow for mistakes (or is “idiot-proof”).

One can understand that much of the manufacturing process becomes a higher degree of mistake-proofing through automation, but what about the rest of the project processing?

What about from the time the customer initiates the communication until invoicing? Most of the time spent processing any project languishes in the communication process.

Slides 43-44 are from TDC’s PowerPoint Training

The best way I can explain this essential lean manufacturing tool is to give four examples of what your company should prioritize for implementation. Start 2024 with an enhancement to your company’s project communications, no matter which division or department, with these four must-have features to reduce errors and simplify the time for task completion. By implementing these four suggestions, your company will have: 9 Far Less Labor 9 Far Less Errors Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #25

Example #1 — Link all emails directly to each project from every department!

Create an automated searchable electronic threaded trail for every project’s relevant email, regardless of project status or department in the company—no more lost emails on a salesperson’s cellphone. Along with the emails, link everything, such as notes, documents, and schedules, connected to each project.

Example #2 — Create an online project management program that works on cellphones and desktops and is not unique to any particular division, such as only the wood truss division!

Think about your current practices for any order or quote in your company.

Does your company only process one type of product, such as wood trusses, or does it offer many different products and services to any customer? The more departments and personnel that are involved, the more likely it is that an error will occur. Often, the only response is that “more training” is often needed to prevent reoccurring errors. If an error occurs, one should always review the process first, not the people. Are people following a well-defined process, and are the tools they use for this process errorproof? If not, why not?

Example #3 — Auto-link information in the company accounting system, such as Epicor BizTrak, to the project management application.

Inputting the same data into multiple programs is a complete waste of time and is prone to errors.

Your programs should sync automatically without a user inputting the same data again, which is time-consuming and error-prone.

On another side note, TDC has found the standard practice of so many companies not knowing their actual profits every week is genuinely astounding. There is no excuse for companies not to know their true COGS daily without using estimated cost numbers so they have up-to-date knowledge of their true EBITA. TDC cannot emphasize enough the need to use actual costs and not estimated numbers.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #26

Adverti$$er

Example #4 — Automate alerts and notifications of pending and past due deadlines.

Schedules and other time-sensitive tasks should automatically notify relevant personnel of delayed or past-due assigned tasks. All projects require appropriately estimated work hours to complete them on time. Why not have an application reminding and alerting everyone of the tasks needed for completion?

Conclusion and Solution — These four examples of Poka-Yoke mistake-proofing would save your company from costly mistakes and needless labor. Your company can try to reinvent a reliable and capable web browser system in-house. However, this is a time-consuming, mistakeprone (bug-filled) process. You can also try the not-user-friendly ERP finance modules add-on system, which is always in perpetual need of training the user more for it to work appropriately.

There is a ready, completely customizable solution that is used by businesses from very small operations to one of the largest LBM companies in North America. It is very easy to use and has a standard cost of less than half that of in-house development or expensive ERP systems. Let AppWright build your automated cloud-based web browser project communication system today.

AppWright Brochure

Embrace the Drummond continuous improvement methods, and your company can realize cost savings and net profit gains that typically take months or years to accomplish, all within weeks or months, resulting in an average of less than a three-month payback for the consultation costs. All areas are addressed, not just the manufacturing.

If you and your team aspire to achieve more in less time, consider TDC’s proven results in process improvement of employee practices, pricing, truss labor estimation, and other best-in-class practices. Tailored solutions are designed to meet your needs beyond typical software and equipment vendor recommendations. TDC provides proven and reliable time standards (R.E., S.U., Work Minutes, Man-Minutes) for wood truss manufacturing that are used for the soon-to-be-known as Houlihan the Drummond Method.

Developed over twenty years, it incorporates differences in material and equipment types.

😉

You can download a free, no obligation, TDC BCMC 2023 20-page educational presentation containing easily comprehensible information: “Component Manufacturing Should Not Be Operated as an LBM Supplier by TDC.” And, don’t just take my word for it—read testimonials from satisfied clients with decades of expertise and experience: TDC Testimonials.

Website: www.todd-drummond.com Phone (USA): 603-748-1051 E-mail: todd@todd-drummond.com Copyrights © 2024

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #27

SAWS

2006 Alpine AutoMill SC Automated Component Saw • Model 348B • Automated Setup via Download or Semi-Automated Setup via Touch Screen Input • 23 Axes of Automation • Sets up in 2 to 15 Seconds • Five Blades cut 2x3 thru 2x12 up to 20' • Waste Conveyor (under saw) • Excludes Incline Waste Conveyor (adjacent to saw) and Live Deck (in fronnt of saw) • 480 Volt / 3 Phase • Video available upon request $38,900 NOW $10,000 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

A

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

NEW! 2001 Alpine AutoMill RS Component Saw 2001 Alpine AutoMill RS component saw, model 343H. Computer controlled saw sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Windows 98 operating system. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touchscreen input. It has [23] axes of automated movement, enhanced diagnostics, auto management reporting. Cuts from 13″ to 20′ long material in size range from 2×3″ through 2×12″. Includes [3] 18″, [1] 22″ and [1] 32″ blades with air brakes and belt under-saw scrap conveyor. 480v/60Hz/3Ph power. $28,997 FOB FL Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Safety Speed Cut Model 7000 Panel Saw

Safety Speed Manufacturing model 7000, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 inch maximum thickness, accuracy within 1/64th of an inch, 10 foot welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready.

Options available include lower frame extensions, digital readouts, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00). $10,199 Base, FOB MN.

765-751-9990

www.woodtechsystems.com

NEW! New L-M Equipment Verticut 2000 PET / Bunk Saw Station

The L-M Verticut 2000 is a true Precision End Trim (PET) saw that is capable of holding a 1/16th accuracy all day long. Made in the USA, the V2k comes equipped with a 15 HP 460/230 volt High-E three phase TEFC motor driving a Double ended Premium “Stellite” inlaid saw bar with a spring loaded chain tensioner and an automatic oiler to lubricate the .404 pitch custom profile semi chisel saw chain.

Rather than a single pivot-point, the saw assembly is mounted on a mandrel box that is guided by cam followers on a steel frame that is raised and lowered by a hydraulic cylinder. A console with the saw controls moves with the saw assembly along a track positioned using a manual “V” wheel geared drive or optional Hydraulic drive The V2k is unlike other imported systems that are basically a Portable Yard Saw on a cutting rack with a best cutting accuracy of +/- 1/8″ (meaning up to ¼” accuracy variance between units of lumber). The V2k from L-M provides +/- 40 thousands, assuring consistent PET precision from unit to unit.

Another advantage L-M has over the competition is their commitment to personal service with unlimited phone assistance and technical help.

Their team has traveled the country working on crosscut saws for many years and they know their equipment inside and out. L-M is a familyowned business that prides themselves in doing the job right and building long term relationship that is vital to their business: “Built to last as long as our customers since 1946”.

765-751-9990 PHONE: 800-289-5627

Price based on configuration FOB OR

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

MiTek Track On Floor

Upgrade What’s Working For You Exchange Your Old Truss Equipment for Newly Rebuilt Machinery!

Klaisler Recessed Track

Robbins No Rail

Eide offers complete upgrade & reconditioning services for your existing truss manufacturing equipment. Add new life to older or discontinued lines with our Machinery Exchange. Warranty on exchanged equipment meets or exceeds the original OEM warranty. Everything mechanical is new, including the controls, electrical & drive systems.

Keep your old machine working until your new machine arrives. Installation & Operator Training available for any equipment exchange.

Robbins Track On Floor

Alpine Easy Rider

Since 1927, we’ve been building & strengthening relationships with our customers through proper placement of the right equipment, parts, services, and support. Contact Eide today & reinvest in what’s been working for you.

Machinery ~ Supplies Since 1927

Eide Machinery Sales, Inc (612) 521-9193 www.eidemachinery.com Alpine RAM Track On Floor

2024 WORKSHOP Register Now & SAVE! APRIL 17-19

CHARLOTTE, North Carolina Fairfield Inn & Suites Charlotte Uptown 201 S. McDowell Street Charlotte, NC 28204

Hotel Deadline: April 3

Wednesday, 4/17

Golf Outing Social Hour Independent Dinner Thursday, 4/18

Educational Sessions Tour Hosted Dinner Friday, 4/19

Educational Sessions

The Workshop is unique from other “ events because it’s specific to MSR. Having all of the content focused on a product that I know I’m using and I need to learn more about makes it a really valuable use of my time.

Plus, I knew that everyone I talked to would be someone I could potentially do business with in the future.”

—Doug Ready, Wick Buildings, Mazomanie, WI

I would encourage other “ component manufacturers to attend the workshop because it is an opportunity to gain a better understanding of MSR and how it can be used. That makes you a more responsible customer because you know how to maximize its use in the design of your product.”

—Porter Clark, Hiwassee Builders Supply Inc., Athens, TN

Learn more at msrlumber.org/workshop

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #32

The truss industry relies on 3rd party quality assurance services to provide random visits to review the plants Quality Assurance program along with their operations. If your plant needs to comply with the IRC, IBC and to those who depend on solid, experienced QA expertise, we ask you to consider selecting Timber Products Inspection, Inc. (TP) as your choice for 3rd party inspections.

Proudly serving the forest products industry for over 50 years, TP brings the expertise you need to ensure your business is successful. As a responsible partner, TP delivers to clients, employees, and the industries we serve the confidence to drive value through the effective use of our diverse professional team.

TP would like to welcome the following authorized agents to our inspection team, each of whom have many years of experience in the truss industry!

•

Al Coffman

•

Jean Hart

•

Curt Holler

•

Chuck Ray

•

Glenn Traylor

•

Elliot Wilson

If you have questions about how you can make this selection, please contact your authorized agent above or Glenn Traylor at 919-280-5905 or trusguy@gmail.com.

https://www.tpinspection.com/ https://www.tpinspection.com/auditing-services/truss

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #33

How Should We Select a 3rd Party Quality Assurance Program?

A

s a new year begins, now is the time to ask: do I need a 3rd party

By Glenn Traylor auditor? If you don’t have one, then you need to take a hard look at your business. As companies in other industries have learned too, using a third party to conduct all audits throughout an organization (or supplementing a third party for some of the audits) brings a fresh set of eyes and a different approach to the research, review, and analysis of shop results, which can lead to reduced loss and overall earnings improvement. And while you may think that it’s a decision that can be made “later,” the future is hard to predict and your in-house program needs to be effective now.

The key to having a successful business is managing your risk. Once you’ve recognized your need for a 3rd party auditor, then the next step is choosing a company that will meet all of your needs. Selecting the wrong organization can be a disastrous error that could impact your defense in a litigation. Although I wrote about this topic several years ago (Quality Assurance, Safety, and the Benefits of a Non-Biased Audit), it’s worth repeating myself a bit to review the key items to consider in selecting the right auditor.

Key Principles Selecting a 3rd party Quality Assurance program might seem like an easy decision once you determine you need one, but there are 9 principles that need to be addressed.

1. Validation: Your auditor will verify compliance with ANSI/TPI 1 and OSHA regulations and guidelines.

2. Perspective: Your auditor will act as another set of eyes on your operation from a person with a broad perspective. Moreover, they have the advantage of bringing even more experience to the table because they are conducting compliance audits in multiple environments and styles.

3. Risk Control: Your auditor can help identify potential issues or problems that could escalate and lead to losses for your business.

4. Objectivity: An auditor’s basis is a standard of quality. It is a series of best practices that are shared among the auditor’s group of clientele. This sharing strengthens each individual’s quality program.

5. Knowledge Base: An auditor’s knowledge of the codes and requirements are to a level of detail that is not reasonably obtainable for a component manufacturing manager.

6. Uniqueness: Audits are inherently unique to each plant and personnel. They are specific to the plant’s safety and quality program.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #34

7. Accuracy: Due to its objective position, the results of a 3rd party audit often provide a more accurate view of what is occurring within a plant environment.

8. Graded Results: While initial results often show lower audit scores, many fabricators realize that the results and evaluation can uncover long-standing issues of non-compliance and opportunities for loss that can be immediately fixed, thereby leading to a positive ROI for the audit program.

9. Targeted: Audits conducted by 3rd parties should not be taxing on time and labor resources.

However, unlike an in-house quality review, a 3rd party auditor enters a location for the sole purpose of conducting the audit. They are not interrupted by the need to complete a job, conduct an employment interview, or deal with a customer situation.

The Value of a 3rd Party Auditor Just going through the motions of doing an in-house inspection is of very little value. Worse than that, it creates a false sense of security. Clicking through a check list without actually doing an inspection is foolish. If you select the right choice of an auditor, this situation can be exposed.

As noted in the NSCA article, “Pencil Whipping Erodes Profits,” it’s important to take ownership of the situation.

Selecting the right auditor helps your customers and the building inspector know what to expect.

The auditor’s stamp represents you and your promise to your customer. This auditor should enable your brand to create clarity in the marketplace and focus on your quality. The right 3rd party auditor will help your brand connect with the municipality governing construction.

A good auditor should be a product/service that has the experience to analyze unique situations.

It should immediately be a recognizable entity that distinguishes itself. This should be familiar and have an established reputation. In the past, component manufacturers have been shocked to find out that their program was not recognized and their 3rd party (nationally prevailing) provider is not approved. The consumer, code official, and end user will associate the product name, label, and packaging with particular attributes such as value, quality, or suitability. Informed code officials recognize the importance of site-conducted audits. A good auditor should help you reshape how you, your employees, your customers, and your investors think about your company. A strong 3rd party can also improve your company’s overall value.

Considering Timber Products Inspection for Your 3rd Party Auditor So, when you’re looking for a 3rd party auditor, you should consider these benefits of working with Timber Products Inspection (TP).

1. TP is one of the most recognizable 3rd party agencies in the world.

2. TP serves 20 different wood products.

3. TP is the leading provider of ANSI/TPI 1 3rd party services in the US. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #35

4. TP has more than 3200 active clients.

5. TP is recognized in every US municipality as a qualified authority and provider of ANSI/TPI 1 3rd party services, including Dade County, Houston, and Los Angeles.

6. TP has accredited analytical and physical labs.

7. TP provides engineering services.

8. TP operates in 16 countries.

9. TP monitors over 15 billion board/linear feet and square feet of wood products annually.

10. TP serves on 24 rules-writing, regulatory, and industry/product organizations.

11. TP has 18 product accreditations with 10 accreditation organizations.

12. TP has been a respected agency inspecting for over 50 years.

13. TP is the largest accredited ALSC agency for lumber, treating, and WPM auditing programs.

14. TP is a dedicated staff of 120 professionals with over 1300 years of experience in providing on-site reviews and inspections.

15. Each TP client is treated uniquely and fairly following the industry requirements.

16. TP is guided by a 22-member Board of Advisors composed of industry-leading executives from 5 different wood product sectors.

The Bottom Line Selecting the right auditor, such as Timber Products Inspection, will help the branding of your company and will carry your business to that next level. It impacts so much more than just sales.

It will reshape how you, your employees, your customers, and your investors think about your company, not to mention the confidence it provides to the code officials that approve your product.

An ANSI/TPI 1 3rd Party Quality Assurance Authorized Agent covering the Southeastern United States, Glenn Traylor is an independent consultant with almost four decades of experience in the structural building components industry. Glenn serves as a trainer-evaluator-auditor covering sales, design, PM, QA, customer service, and production elements of the truss industry. He also provides project management specifically pertaining to structural building components, including on-site inspections and ANSI/TPI 1 compliance assessments. Glenn provides new plant and retrofit designs, equipment evaluations, ROI, capacity analysis, and CPM analysis.

Glenn Traylor Structural Building Components Industry Consultant http://www.linkedin.com/in/glenntraylor PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

INNOVATION IN ACTION O Y L L A E V R A H STACKE E W GANTRY

!

S D E U R N E OLLER FINISH R

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #37

SAWS

2021 Powermatic Model 511 Panel Saw 2021 Powermatic model 511 panel saw.

Vertical panel saw features a powerful 3HP worm-drive motor which rotates in the carriage, adding the versatility to perform rip cuts. The solid aluminum rollers assure smooth feeding of stock and perfect 90° cuts every time. This saw will handle panels up to 5-ft tall in unlimited length. Includes horizontal and vertical scales and casters for mobility, the counterweight system keeps the saw carriage in the desired position when loading or unloading panels. Features dual 4″ dust collection ports with nylon brush surrounding the blade for superior dust collection from the front and the rear side of the panel. 115v, 1-phase electrical required. $6,799 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com

!

W E N 2023 Northfield Model 410 Upcut Saw NEW 2023 Northfield model 410 upcut saw available for immediate shipment.

90/90 degree cuts to 4″ x 10″ capacity (fence forward position) to 2″ x 14″ (fence rearward position). Saw is configured for material from left to right, with 3″ x 6″ air operated cylinder, filter, regulator, lubricator, 10 HP motor, enclosed steel base with cast iron table, magnetic starter and adjustable operating speed from 20 to 60 CPM. Includes optional two-palm controls, additional 4″ dust outlet, NEMA 12 electrics with fused disconnect and two 18″ diameter 60 tooth blades with 1″ diameter bore. 460 volt, 3 phase electrical required. $18,630 FOB MN Wood Tech Systems 765-751-9990 www.woodtechsystems.com PHONE: 800-289-5627

Your Solution for Lack of Technical Staff

● PlanSwift Lumber and Building Material Takeoffs ● Truss and Wall Panel Design Experienced Staff ● EWP Layouts and much more!

Eliminate your lack of technical resources to grow sales and increase the clock speed of your company 2005 Alpine SpeedCut Express Pull-Arm Saw 2005 Alpine SpeedCut Express pull arm saw, model 650H. From OEM literature: “Saw uses information created with truss design software, featuring automatic set up for both length and angle for every piece.

On-screen graphics show the orientation of the lumber while the saw sets up for the next cut. Machine movement occurs after the blade is returned to a safe position behind the fence. Minimum angle is 5 degrees and the maximum angle is 135 degrees. Maximum scarf cut is 22 inches.

Setup is digital. Angulation and length measure are powered.” Includes 5 HP motor, 16″ diameter blade, 12″ wide x 20 foot long infeed and 12′ x 10 foot long outfeed conveyors and a manual. Computer operating system is Windows 2000. 480 volt, 3 phase, 15 Amp electrical required.

The computer requires 120 volt, single phase electrical service. 80 PSI at 7 CFM air required. $19,497 FOB WA Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Dave.AllPoints@gmail.com • www.AllPoints.Tech The Gold Standard in Technical Support Teams

MANUFACTURERS’

REPRESENTATIVES

NEW! New Monet DeRobo Linear Saw 1995 Clary Model 324 4-Blade 90/90 Component Saw Reconditioned 1995 Clary model 324 4-blade component saw configured to cut 90/90 studs or floor chords. $9,490 FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.com

New, DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and open-stair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, left-to-right feed direction standard, lumber push and pull grippers for more accuracy, ink marking on the 1 1/2" face of the incoming boards and small piece capture and delivery to the front of the saw for easy access. Infeed deck and bunk feed are shown as options only. 480 volt, 3phase. Call for pricing, FOB MO.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

The PieceMaker Fast, accurate cutting for your manufacturing center.

THE AUTOMATED LINEAR SAW EVERY TRUSS PLANT NEEDS US fabricators agree they are loving the PieceMaker in their production facility. Full optimization with the ability to look ahead panel by panel or job by job. Cuts standard and custom miters, birdsmouths, raking plates and studs, low angles, long cuts, large lumber sections and all your normal standard cutting.

With a short lead time to have installed in your factory, enquire about the PieceMaker today!

E sales@spida.com

T +1 866 647 7771

spida.com

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #39

New Monet DeSawyer 2000 Component Saw !

W NE Call for Pricing Condition: New Location: MO

New, Monet DeSawyer 2000, computerized, five-bladed component saw, sets up in 15 to 17 seconds, can run in manual mode, downloads projects from a network or manually using display screen controls.

Features all powered movements, cuts from 15" 90/90 cuts to 20 foot length, 2 x 3" to 2 x 12" lumber depths and internal brakes are standard. Options include enhanced servo controls featuring autocalibration, catcher's display and either shaker or belt scrap conveyor and incline. 440 volt, 3 phase electrical. www.woodtechsystems.com

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #41

SAWS

2021 Oliver Upcut Saw with 16' TigerStop • Oliver Model 5025.002 Upcut Saw • 7.5 HP / 230 Volt - 3 Phase • 18" Blade (4" x 9", 2" x 12" Capacity) • Foot Pedal Control • Open Interface to TigerStop (SET) • 16' TigerStop (TS16) with 18' Roller Table (TABR16) • Saw Attachment Plate (SAP) $19,900 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

MORE INFORMATION HERE 2008 Alpine PF90 Wall Panel Saw 2008 Alpine PF 90 wall panel cutting and marking system. 3.5″ x 12″ maximum cutting profile, Inkjet option, cuts to 16 ft long. From the OEM’s literature, “Effortlessly handles two of the most critical and difficult processes in any wall panel operation – plate cutting and panel layout.

At the rate of 1,000 linear feet per hour or more, uses data from the design software and accurately marks stud, cripple and jack locations, job and panel number, subcomponent and window/door locations, and even sheathing locations on both top and bottom plates simultaneously with ink-jet printing. $8,499 FOB NY Wood Tech Systems 765-751-9990 www.woodtechsystems.com

1998 MiTek Cyber Saw 1998 MiTek Cyber Saw, fully automated five-blade component saw, cutting performed by (2) 16″, (2) 20″ blade x 6 HP and (1) 32″ blade x 12.5 HP. has PC with Windows 10 operating system, monitor, automated or manual part input, all powered movements, cuts 2×4 thru 2″x12″, plus 4×2 four-angle floor web lengths from 22”.

Lengths cut from 2 feet to 20 feet. Includes spare set of blades, dust hoods and undersaw scrap belt conveyor. Angulation circuit needs repair. 240v, 3ph power required. $23,997 FOB KS Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2000 Alpine AutoMill RS Automated Component Saw • Automated Setup via Truss Design Software Download • 19 Axes of Automation • Sets up in 2 to 19 Seconds • Five Blades cut 2x3 thru 2x12 up to 20' • Waste Conveyor (under saw) • Many Spare Parts (in photos) • Excludes Saw Blades & Incline Waste Conveyor (adjacent to saw) • 480 Volt / 3 Phase $26,500 FOB IA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

A

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #42

Inspiration to Feed The Beast! in 2024 s we all plan for a productive and profitable 2024, I would like to celebrate three 2023 Feed The Beast success stories: a multi-million-dollar plant expansion, a complete saw shop makeover, and a plant renovation.

All three of these projects implemented some or all of Enventek’s “out-of-thebox” Process Organization Technology to produce more trusses with a significant Edmond Lim, P.Eng. reduction in operating costs. Processes were simplified and standardized as part LimTek Solutions Inc. of the in-line or just-in-time workflow implemented. Just-in-time workflow is a gutsy move, and yes it requires total trust and confidence from the top down, but more importantly the systems and machinery must be proven and robust enough to be quickly brought back online if and when there is a glitch.

A

A Multi-Million-Dollar Plant Expansion Success breeds success, and the best way to get over the fear factor of just-in-time production is to tour and talk to truss plants that are using Enventek’s Process Organization Technology. Travis White, VP of Truss Operations for Tindell’s Lumber Co., did just that and extensively researched the best ROI for their multi-million-dollar expansion. Their major expansion included re-tooling with a fully loaded Enventek RetroC auto-feeding component saw paired with the Enventek Lumber Pickline.

White and Team Tindell elected to go with the Enventek RetroC, over larger name brands, as it is uniquely the only auto-feeding component saw and cuts collated parts that automatically fill paired SpeedCatch carts without the need of a catcher on the back of the saw. The carts are then delivered to one of the ten roof building stations that incorporate the new MiTek Wizard automated tables for increased efficiency. Each table workstation has dual 75” TVs that display the Enventek PlantOne color-coded truss setup and build information, eliminating paperwork and improving efficiency.

With the completion of this renovation, forklifts are no longer required to deliver parts and pieces to the build stations, saving valuable time and money. Now the forklift is only needed to load the PickLine with full bundles of lumber and then after, the trusses are fully assembled and ready to be loaded onto a truck.

For more on this story, see my July article, “Anticipation and Optimization.”

Tindell’s after photo showing the 200 ft T-Shed covering a Double Lumber PickLine with 50’ SmartConveyors feeding a fully loaded RetroC with SpeedCatch auto-fill carts in the new 85’ x 145’ saw shop addition PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Continued next page

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #43

A Complete Saw Shop Makeover As originally reported in May 2023, “Incremental CapEx and Accelerated ROI”, linear saws and material in-feed was moved from the building interior to the exterior wall in this case. The resulting interior plant space was reclaimed with the implementation of a new floor truss line. The second PickLine was completed by August 2023 and the two linear saws are essentially The new Double Lumber PickLine at Lampasas Building Components being fed by one (1) picker and a less-than-part-time forklift just to replenish bunks of lumber on the PickLine, resulting in significant operating cost savings.

The sawing output of each linear saw has increased 30% as a result. Mission accomplished!

Renovate with a Fully Loaded RetroC The beauty of an exterior Lumber PickLine is that it can be implemented without the need of a building addition, resulting in increased sawing output with significant operating cost savings and better collated lumber at the truss tables to boot!

It’s a win-win-win. Did you know that a fully loaded RetroC with SpeedCatch has a 50% smaller footprint than manual lumber catching/stacking behind a saw? That means The new Lumber PickLine at Structural Wood Corporation Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #44

that a RetroC with SpeedCatch can be literally shoe-horned in to make the best use of plant space, once again eliminating the need for a plant expansion by reclaiming existing space.

It’s not just another hole in the wall with a SmartConveyor and a Lumber PickLine. This RetroC renovation required a custom wall cutout with the RetroC snug against existing columns to “make the RetroC fit” to reclaim previously unused factory space.

The SpeedCatch cart path only takes up 5 ft behind the RetroC. Carts are virtual conveyors on steroids, further enhanced with large quantities of cut pieces. Carts enable flexible batch flow without the floor space restrictions of fixed conveyors. With carts, the floor space ebbs and flows from full to empty. For more on this story, see also my October article, “Pick, Cut, Build— Talking Shop at BCMC 2023.”

When you’re ready to Feed Your Beast and see these efficient and effective systems for yourself, let us know!

Inside and out, LimTek Process Organization Technology will help you squeeze out more truss production and deliver quality trusses with shorter lead times to better service your customers by organizing your truss fabrication processes to maximize your investment in automation. https://limteksolutions.com/#solutions PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #45

SAWS

MANUFACTURERS’

REPRESENTATIVES

NEW!

Used Hain Quick Rafter Cutter • Reconditioned in December 2020 • Board Sizes: 2x4 and 2x6 • Motors: Two 1 HP / 220 Volt or 440 Volt / 3 Phase • Saw Blades: 7 1/4" Carbide Tipped (set at 45 degrees) • Angle Adjustment: Manual Rotation with Air Brake • Air Supply: 90 PSI • Carriage: Steel Rails with Steel Dual V Rollers • Pedestal: 3/16" Formed Steel • Saw Housing: 1/2" Billet Aluminum • Covers: 10 Gauge (1/8" thick) Steel • Fully Enclosed for Safety $12,500 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

2000 Automill 5-Blade Component Saw 2000 Timbermill model 343H, five (5) blade component saw cuts lumber from 2″ x 3″ through 2″ x 12″, lengths from 18 inches to 20 feet, including 4″ x 2″ four-angle floor webs from 18 inches. All powered movements, includes computer controls, (1) 30″, (1) 20″ and (3) 14″ blades, analog scales, shaker scrap conveyor, scrap incline and extra set of blades. 480 volt, 3 phase electrical required. 90 PSI air required. $24,997 FOB ON Wood Tech Systems 765-751-9990 www.woodtechsystems.com

M ACdverti$er

The

omponent

anufacturing

Serving the Structural Building Components Industry

Monet FWA 500 CA Automated Floor Web Saw In answer to the demands of high-volume customers comes the Monet DeSauw FWA 500 CA (Automated Controls) floor web saw. The 500 CA is perfect for component manufacturers who routinely run floor trusses in high volumes with variable web geometry. Another primary feature is enhanced safety through automation which eliminates the need to open the saw motor cabinets other than for periodic service. The 500 CA includes automation for all blades, including the fixed cut-off blade for minimal waste. Lumber infeed speed is variable up to sixty (60) boards per minute, while the powered carriage utilizes rack and pinion drive with airlock for set accuracy throughout the production run. Your operator will easily download batches to the 500 CA saw from your design software via an ethernet connection to a MS Windows 10 industrial PC with a 17″ monitor housed in a stand-alone console. If you frequently batch floor web cutting, and if enhanced safety with increased productivity are a concern, then an automated Monet FWA 500 CA may be the right selection for you. Mofe information Here

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com

FAX: 800-524-4982

Continued next page

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #47

Adverti$$er

NEW!

New Monet DeSawyer ESC (Servo Controlled) Component Saw Monet DeSauw model Desawyer ESC enhanced servo-controlled ( ESC) component saw with touch screen user interface with backup mechanical controls. Includes three operating modes: Auto (download setups from LAN or USB), Semi-auto (touch screen setup entry), and Manual (backup push-button switches for powering all movements). Includes over-travel protection, comprehensive setup screens, auto sequencing, auto-calibration and pneumatic brakes on all five () blades. One (1) 30” blade and four (4) 16” blades. Manual cut limits are 18” min., 11” min. square edge blocks, 20’ max cut. Belt under-saw waste conveyor. Voltage: 480 volt/3 phase/60 Amp. Air: 50 PSI at 5 CFM. One-year warranty included.

Can be paired with a model PD-6 lumber feed system at an additional cost. Heavy duty 80 RIV chain feed system. 16’ wide x 20’ long x 36” deck height. Transfers 3’ to 20’ lumber. Includes auto-feed control, foot pedal override, forward & reverse, variable speed control with HD double-bearing construction.

Other additional-cost options include, inkjet marking, label printing, backside screen display, spare blades and incline scrap conveyor.

$349,900 FOB MO

765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Design and build faster than ever.

From plans, to walls, to panels, and everything Learn more at EagleMetal.com

above. Introducing a new level of design tools, built from the ground up.

Continued next page

IMPROVE CONSISTENCY INCREASE EFFICIENCY

The Industry-Leading Manufacturer of Panelized Wall Panel & Floor Cassette Equipment.

PLATINUM SERIES

AUTOMATED SHEATHING STATION The Platinum Series Automated Sheathing Station is the most automated sheathing station that Panels Plus offers and reduces the amount of time an operator needs to be hands-on during the sheathing process. This sheathing station is driven using MiTek Software and completely fastens sheathing to studs, blocking, headers, and sill plates to ensure quality panels every time. This model can be a stand-alone unit, or integrated into a larger system. Various sizes and configurations are available.

Financing Options Now Available!

• Fast credit decisions & broad terms • 3 months deferred payment • Nothing down

CONTACT US

TODAY!

WWW.PANPLUS.COM

1-866-726-7587

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #51

Implementing Continuous Improvements at Panels Plus

I

t’s hard to believe that it is already the New Year, but we had another successful year at Panels Plus in 2023. Despite some ups and downs in the housing market and all the buzz around high interest rates, we had our busiest year on record. The incredible value that our wall panel and floor cassette equipment offers is being recognized by more builders every year. This equipment allows companies to increase their production while improving quality and safety along with a speedy ROI. Panels Plus is making continuous improvements to our equipment to make it even better. In the past three years, we have developed specialized equipment for portable buildings, upgraded the bridge drive system, and upgraded some of the sensors and improved our software based on ideas that were developed during the design of the Platinum Series Automated Sheathing Station.

By Tim Grahn General Manager

Continuous Equipment Improvements While we are on the topic, we have installed several Platinum Series Automated Sheathing Stations in the field and continue to work to improve our software to cover a variety of industry needs. Each company operates differently and there have been several requests for program modifications to fit the Platinum Sheather to our customer’s application. In most cases, we have been able to quickly add the new feature to the standard Platinum Sheather program. Our goal is for each unit to have the same control program, but to be able to be set up through the operator interface to work for different assembly methods. Another project that is in development is to be able to read nail requirement output from a variety of design software. We are planning to work on this in 2024. If you are considering wall panel equipment and you want to see it in action, we can arrange a visit to our location in Minnesota.

There are several new products in the works with our R&D team. If you are currently using some equipment (any manufacturer) that doesn’t quite meet your needs, please contact us directly or a distributor in your area to see if Panels Plus could design a similar machine that does meet your needs. We will always consider adding new products to our line.

BCMC 2023 The BCMC show was great last year and our team made a lot of connections. If you stopped by the booth and requested more information, you should have heard from Tim or Jeff within the first week or two following the show. Please reach out to us if you have not received a response as I assure you that we have made several attempts. We may have the wrong number or e-mail address, but we always want to make sure that your requests are heard.

And, Panels Plus is growing! We are actively looking to hire two additional Regional Sales Managers, so if you know of any industry professionals that might want to represent our innovative product lines, please contact me. As always, I encourage you to visit the Panels Plus website for all the latest news and literature.

Panels Plus is also on LinkedIn and YouTube. Please visit us at www.panplus.com or write to us at sales@ panplus.com.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

There’s nothing else like it..

The Ranger Retrieval System is built to order in lengths from 30-130 ft (9-40m), and can feed 1 or 2 linear saws.

Every plant layout is unique. That’s why every Ranger Retrieval System is built to order, sized for your operation, and matched to your choice of linear saw.

Acer Inc. 301 Industrial Drive Rushford, MN 55971 USA 507-864-2220 www.acerinc.com RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244 and other patents.

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #53

800-382-0329 www.wasserman-associates.com

2013 Monet DeSauw Finger Jointing Line

• Monet DeSauw Cut-Off/Shaper Unit • Rook Metering Equipment Glue Machine ($22,900 New in 2021) • Monet DeSauw Finger Joint Press • Excludes Dust Collection System

$52,900 NOW $42,500 FOB MO PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

· Simplified Re-Design · Robust low maintenance · No upper hold downs · Electronic braking · Auto feeding lumber · Holds calibration · Out cuts any linear saw · Cut-by-Truss or Batch cut

6021 Yonge St., Unit 1019 Toronto, ON M2M 3W2 Tel: (416) 888-4457

Edmond.Lim@LimTekSolu�ons.com

LimTekSolu�ons.com

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #57

SAWS

Pricteion! c Redu DANCO GANG-RIP SAW • 3 3/8" Maximum Thickness • 13 1/2" Maximum Distance from Rip Fence to Outer Saw • 100 HP Arbor Motor • 2 HP Feed Motor • 7 1/2 HP Dust Collector • 480 Volt / 3 Phase • Waste Conveyor with Short Incline $35,000 NOW $21,900 FOB MN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

EKSTROM-CARLSON MODEL E STRAIGHT LINE RIP SAW • 10 HP Arbor Motor • 3 HP Variable Speed Feed • 4" Maximum Thickness (when using 18" Blade) • 48" Throat • Adjustable Rip Fence • Overhead Holddown • Automatic Chain Oiler • Dust Outlets $10,500 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

“Serving the Component Industry Since 1996”

Now offering short term Working Capital Loans

Start smarter...

Grow faster...

Achieve more...

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108

Phone: 412-262-3225 Fax: 412-262-1154

2005 PCS / MiTek Twin Axis Sheathing Saw 2005 PCS/MiTek Twin Axis sheathing saw: Cuts X and Y axis simultaneously in one pass through the saw. Cuts up to 1″ thick, wood sheathing material, minimum width 3″. Fully enclosed to reduce noise, dust, and improve operator safety; automated via downloaded sheathing cutting files from wall design software. Includes 8 foot long idler infeed conveyor and outfeed conveyor with pop-up skate wheels, (1) spare blade and all available spare parts.

220v/440v, 3phase electrical saw, 120v, 1 phase electrical PC. 100 PSI at 14 CFM air required. $17,991 NOW $11,950 FOB VA Wood Tech Systems 765-751-9990 www.woodtechsystems.com

A

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

1995 Speed Cut Metra Cut Model SSA-17 1995 SpeedCut Metra-Cut model SSA-17 centerline radial arm includes center-point cutting, turntable cutting system, 20ft. infeed, 10ft. out-feed conveyor. $5,990 FOB OH 765-751-9990 www.woodtechsystems.com

1993 Mitek Easy Set 4 Blade Component Saw 1993 MiTek Easy Set 4-blade component saw, with swing-arm central control system, digital/analog display, power length carriage, waste conveyor. Cuts 2″ x 4″ to 2″ x 12″ lumber depths. Cuts to 12″ 4 angle floor webs. 220v, 3ph power. $8,990 FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2005 Alpine AutoMill SC Component Saw • Model 348B • Automated Setup via Download or Semi-Automated Setup via Touch Screen Input • 23 Axes of Automation Sets up in 2 to 15 Seconds • Five Blades cut 2x3 thru 2x12 up to 20' • Waste Conveyor (under saw)

• Incline Waste Conveyor (adjacent to saw) • Excludes: Live Deck (in front of saw) • 480 Volt / 3 Phase • Available March 2024

$40,000 FOB CO

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

IF ONLY YOU COULD NAIL EVERYTHING IN LIFE THIS EASILY. With a Terminailer XP, it takes only one person to drive between 30% and 70% of the framing nails in any given job. And all this nailing is done within a secure enclosure, so your people are protected from costly nailing injuries while eliminating literally millions of repetitive motions (4,001,398 repetitive motions to be exact, judging from the total nail count tallied recently on a two year-old Terminailer XP).

That’s a lot of nails successfully installed to be sure, and a lot of debilitating repetition your workers’ hands are spared, without any complicated training, software or lengthy setup time required.

Developed by people who know wall panel production, Terminailer XP boasts multiple repeat buyers, 20-plus machines performing exceptionally in the field and tens of millions of nails installed.

Thoroughly field-proven, Terminailer is ready to drive greater productivity for you.

Contact us today for more information.

765-751-9990 www.woodtechsystems.com

Wood Tech Systems is a registered trade name of Wood Truss Systems, Inc.

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #59

What You Can Expect in 2024 Carl Villella, CLFP President, Acceptance Leasing & Financing Service

A

ccording to the research team at Goldman Sachs, we can expect healthy growth in 2024, with the economy growing by 2.1%.

Most of the problems that would lead to higher inflation, such as an overheated labor market, are gone. And as a result, the probability of a recession in 2024 is much lower than what was predicted months ago. There actually was a “soft” economic landing!

While business investment is expected to slow, and financing conditions are expected to be more difficult, mostly for real estate, overall business investment is expected to grow 1.75%.

Another bit of positive economic news: Consumer spending is expected to be strong, with real disposable income expected to grow by 3% in 2024.

All this good economic news emphasizes the point that now is a good time to consider what equipment you’ll need to make 2024 a banner year for YOU. With rate increases mostly behind us, now is a good time to access your bucket list, and talk to us about the financing options available to you. We finance both used and new equipment, and under certain circumstances we can finance equipment that you recently acquired with cash, to improve your cash flow situation.

There are a number of financing programs available. We’d be happy to discuss them with you.

Call us at 412 262-3225.

We are Acceptance Leasing and Financing Service, Inc. We will be in our 32nd year of business in 2024. Established in 1992, we pride ourselves on our Certified Leasing and Financing Professional designation. We are a member of SBCA and a frequent attendee of the BCMC tradeshow. We can provide financing for any new and, regardless of age, used equipment.

We look forward to working with you.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #60

Adverti$$er

Imagine using software that works the way you do.

© 2024 Simpson Strong-Tie Company Inc. M-T-TRUSS23-SOFT

Bring everything into view with Simpson Strong-Tie Component Solutions software. Driven by customer input, it’s designed to support the way you actually work. CS Director™ streamlines project management and collaboration from quote to invoice. CS Truss Studio™ is an intuitive truss layout solution that designs components and specifies connectors and fasteners.

CS EWP Studio™ combines 3D layout, member design and material reporting for engineered wood products. Backed by our expert service and support, these open-platform tools integrate with popular industry systems and extensions, so you can move ahead with greater ease, control and efficiency. ®

®

Design, specify and manage with one software suite. To learn more, visit go.strongtie.com/componentsolutions or call (800) 999-5099.

Solutions |online Products, Software and Service for Smarter Building PHONE: Integrated 800-289-5627 ComponentRead/Subscribe at www.componentadvertiser.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #61

SAWS

Custom 3-Arm Infeed Decks Two custom-built powered infeed decks, 3-arms each, 12′ x 12′ footprint each, touchpad controls and chain conveyors.

One deck has a 5 HP drive and the other has a 10 HP drive. 480 volt, 3-phase electrical required.

10 HP price is $7,993 & the 5 HP price is $6,993.

Wood Tech Systems 765-751-9990 www.woodtechsystems.com

NEW! $14,499 Base FOB MN

1995 MiTek Easy Set 4-Blade Component Saw 1995 MiTek Easy Set 4-blade component saw, with swing-arm central control system, digital/analog display, power length carriage, waste conveyor. Cuts 2″ x 4″ to 2″ x 12″ lumber depths. 220v, 3ph power. $11,990 FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Safety Speed Manufacturing Model 7400 XL Panel Saw

A

The 2019 Mitek Auto Deck (for Mitek Blade Saw) Five Chain Auto Deck (for Mitek Blade Saw) $18,900 NOW $13,900 FOB WI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Safety Speed Manufacturing, model 7400 XL*, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 1/8" maximum thickness, accuracy within 0.005 inches, 13 foot long welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include digital readouts for vertical cuts, automated length measuring, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00).

765-751-9990

www.woodtechsystems.com

NEW!

2006 MiTek Cyber A/T Component Saw 2006 MiTek Cyber A/T Component Saw. Frame #521, Fully automated five-blade component saw, cutting performed by 2-16″ x 7 HP, 2-20″ x 7 HP, 1-32″ x 13 HP. Windows 7 PC in enclosure for fully automated or manual part input, all powered movements, cuts 2×3 thru 2×12 plus 4×2 lumber. Lengths cut from 14″ to 20 feet. Minimum 4-angle cut 22″ (17″ in manual mode) Belt scrap conveyor included with short incline (approx 4′). Includes skate wheel outfield conveyor and optional “Catcher Display”. Includes all available spare blades, spare parts, and manual with schematics. 2480v, 3ph power required.

$89,990 FOB VA 765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

New Monet DeWall Saw Monet DeWall 90/90 wall panel marking saw is a computer numeric controlled wall panel saw with touch screen user interface. Cuts and marks up to 2 boards at a time using 2x4 through 2x8 or cuts and marks one board at a time. Call for pricing, FOB MO 765-751-9990 www.woodtechsystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Our Table Presses offer supreme versatility & functionality The Mini 8 and Mini 10 are ideal for the frame & truss industry. With a 40t pressing head, the ability to press any truss, hip, jack or other pressing requirement is an absolute breeze!

Key features available include:

TABLE TOP OPTIONS: A plastic slotted table top with weg-it jigging or a steel top with 5.9” centered holes that accommodate bolt on truss jigging. Mini 8 ride on at ground level, 8ft wide / Mini 10 at table level, 10ft wide – Both can have Floor Truss Jigging as an optional extra.

Get in touch today, and learn how you can be more productive with the Mini 8 or Mini 10.

E sales@spida.com

T +1 866 647 7771

spida.com

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

$34,900 FOB MN Wescana Vertical Truss Stacker 4 Lifting Arms Stack Trusses from 20' to 60' Spans (2 HP / 3 Phase) Stacking Capacity of 30 Trusses with Indexing for Each Truss Stacked 28 Second Cycle Time Automatic Truss Sensors to Activate Lifting Arms PLC Controlled 7" Touch Screen User Interface Dual, Manual & Automated Electric Controls 70' Powered Outside Conveyor (1 HP / 3 Phase) Call for Price - FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com

• • • • • • • •

Adverti$$er

January 2024 #16294 Page #63

Hydro-Air Mark-8 & Mark-10 Presses with Magnetic Pedestals Mark 8 / Mark 10 System (1) Mark 8 mono-press with boom and hydraulic pump (last used 7/19/2023) (1) Mark 10 mono-press with boom and hydraulic pump (last used 7/19/2023) (1) Lot of power chords (42) fully operational Mark 8 / Mark 10 tables (1) 100' of electrical feed rail Mark 8 Pedestals *All Mark 8 tables are modified to work with the Mark 10 C-clamp press (2) oversized Mark 8 splice tables (1) Mark 8 peak table (2) Mark 8 splice tables, convertible to web tables (8) Mark 8 web tables (4) double wide Mark 8 web tables Mark 10 Pedestals (2) large Mark 10 heel tables (4) Mark 10 heel tables, convertible to web tables (2) Mark 10 peak tables (17) Mark 10 splice / web tables

Truss Rollers with Stands 7 Each at $500 Each - 13' Roller with Stands - 34 1/4" Fixed Height • 1 Each at $250 - 13' Roller (No Stand) • 3 Each at $400 Each - 10' Roller with Stands - Adjustable Height • 11 Each at $400 Each - 8' Roller with Stands - 34 1/4" Fixed Height • Purchase all for $8,415 Wasserman & Associates 800-382-0329 www.wasserman-associates.com •

CMF Peak-Up Truss Stacker • (2) CMF 4 Pedestal Peak-Up Stackers (Inline) • Stack (2) trusses up to 40' in length or (1) truss up to 90' in length • (2) Motors (240 Volt / 3 Phase) • Control Panel • Excludes: Truss Conveyor & Crash Bar/Target $10,000 FOB MD Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

NEW! WESCANA TRACKLESS ROLLER GANTRY SYSTEM • Trackless Roller Gantry • Ride-On Platform at Table System Height • 24" Diameter x 1" Wall x 14' • 2' per Second Travel Speed Long Gantry Roller • Continuous 3/4" Steel • 7.5 HP / 3 Phase Gear Motor Slotted Top Table with Safety Brake • Manual Roof Jig Hardware • Controlled Motor Drive • Ejectors for Side or End System for Start & Stop Eject • Safety Barrier & Electric Eyes • 2 Park Sections • Front & Rear Emergency Shut • Optional Wizard Ready Off Bar Tables, Transfer Rollers, • Joystick Operation Control Exiting Conveyor, Finish Roller & Outside Conveyor

800-382-0329 | www.wasserman-associates.com

(18) Non-operational tables (magnets may still work) (1) Mark 10 peak table (1) Mark 8 peak table (6) double wide Mark 8 web tables (10) Mark 8 web tables Extra presses (1) Mark 10 C-clamp, repacked, no platen (1) Mark 10 boom with motor, no pump, no C-clamp press (2) Mark 10 C-clamp press heads, used, no rams, no platens Misc parts (1) Mark 10 pump, used but good (1) Mark 8 pump, used but good (1) Mark 8 ram, used, pitted (2) Mark 8 platens - used (3) drive sprockets (1) trolley wheel (3) splice table assembly brackets for Mark 8 or Mark 10 (3) heel table bottom limit bars (3) heel table top clamps, 1 needs repair (28) chord stops (21) web stops (76) steel bars for holding plate boxes on the side of tables (1) lot of feed rail parts (1) lot of C-Clamp packing parts (1) lot of misc parts More Information HERE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEW! • (2) 24" Diameter x 14' Long Rollers • 3 1/2" Diameter Shafts with Baffles • Dual 5 HP / 3 Phase Gear Motors • Front & Rear Emergency Shut Off Bar • Safety Barriers & Electric Eyes

• Controlled Motor Drive System for Start & Stop • Running Amber Beacon • Reversing Red Beacon & Buzzer • Emergency Stop Control Module • Taper-Lock Sprockets • Sealed Flanged Roller Bearings • Revesing Magnetic Starter • 2' per Second Travel Speed

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #64

Creating Your Own Commodity Market Performance Measures

By Valerie Hansen Founder and Chairman, BuyMetrics Inc.

I

f you haven’t considered BuyMetrics yet, I have one more reason for you to check it out in 2024 – our new Commodity Analysis and Visualization Module. This new module will give BuyMetrics’ clients the power to control their own market analysis and measure their own performance. This means hands-on tools to engage deeply with their commodity shop/purchase data, as well as visualization tools for insight and the means to capture incremental profit.

If you’re hesitant to delve into new software, I can assure you that BuyMetrics makes it easy for non-technical users to dig deeply into their commodity data. Our interactive tools enable lumber and panels buyers to construct their own performance measures and track the results against internal and/or externally generated market measures. The software does the heavy lifting, cleaning and transforming raw data, presenting complex datasets in engaging visuals, empowering users to dynamically interact with the information, and automating the production of your most important measures.

Explore with confidence. BuyMetrics’ advanced analytics make it easy to discover and quantify relationships within the data, to observe market dynamics, spot trend shifts, identify outliers, and plug profit leak. You can compare your purchases to your vendors’ volume-weighted average price, the next-best quoted price, a pre-negotiated formula price, or a price reported by one or more price reporting services – and keep score. In fact, you can even figure out which vendors save you the most money, and under what conditions.

In our digitalized world, it’s important to remember that your shopping data embodies leadingedge market information. Commodity markets are notoriously volatile, but BuyMetrics’ new module and APIs make it easy to share your analysis/insight with authorized decision-makers across the company. For example, to improve lumber margin (realize enhanced ROI), you can share your carefully gleaned market data – timely and exclusive price information, market coverage, trends – with colleagues responsible for setting the company’s bid/sell prices.

At BuyMetrics, we understand every business has its own competitive environment, its own products/production mix, its own cost-of-goods. Since 2000, our proprietary Commodity Procurement Platform has automated and informed the purchase of lumber and other constructionrelated commodities for large and small manufacturers/re-manufacturers, distributors, and verticallyintegrated big builders. So, when you’re looking for improved market visibility and greater control over your commodity procurement process, visit our website www.buymetrics.com, or reach out to us directly by phone 888-485-8623 or email info@buymetrics.com.

Valerie Hansen is the Founder and Chairman of BuyMetrics Inc. She is a 45-year industry veteran and the former owner/CEO of Custom Components Company, Racine, WI (sold 2008). From 2000–2019, she earned 21 U.S. patents for inventions in the technical areas of finance and data management. Privately serving industry-leading CMs since 2000, the BuyMetrics® commodity procurement platform automates and informs the purchase of lumber and other volatile commodities.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #65

TRUSS EQUIPMENT

JobLine.com, inc.

The

800-289-JOBS

Diamond/MiTek 40′ Floor Truss Gantry with 18″ Roller 40′ floor truss gantry with no flip or eject.

Includes rail with base plates and V-track.

Includes 18″ roller gantry. $24,900 FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Time To Hire?

We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com STRICTLY CONFIDENTIAL!

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry

Like Money in the Bank.

Service you can count on!

We create transformative website and app experiences Since 2006, we've been helping businesses of all kinds build their online presence. We make websites and software for the construction industry to empower companies to reach a wider customer base and engage their audiences. Companies all around the world work with us to make websites and apps that people actually want to use. Reach out to Wolf X Machina if you're a business and you want a website that actually drives results.

WOLF X MACHINA www.wolfxmachina.com info@wolfxmachina.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Choose the Tornado M500 for efficiency This Linear Saw automatically feeds, cuts, prints and ejects wall frame components - handling 20ft lengths, stacked 3 high.

+

SPEED

ACCURACY

EASE OF OPERATION

INCREASED PRODUCTIVITY

Boost your output with the Tornado M500, the most cost-effective addition to your plant.

E sales@spida.com

T +1 866 647 7771

spida.com

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #67

Adverti$$er

TruStance Portable Field Repair Press This is the first, self-contained, truly portable FRP unit used to press metal truss plates into dimensional lumber at virtually any location.

Wood component (roof and floor truss) manufacturers, as well as builders, frequently require a tool to repair metal plate connected, wood truss components. The complete unit is mounted to a wagon built from square tubular steel. Extremely compact at only 28” wide and about 32” long the wagon features four wheels on soft-rubber solid tires, and a steering axle on the front with a handle that makes the unit easily maneuverable. The wagon contains the hydraulic power unit and an area for a portable gas generator. A rack in the back securely stores the C clamp, a standard 25′ hydraulic hose, and an electric power-supply cable.

The clamp is manufactured from T1 steel, cut into a C-shape with a steel tube welded to the front that securely holds the hydraulic cylinder. Pressing is easily performed with a 4×4 magnetized steel platen that holds and presses the truss connecter plates. The C-clamp that weighs less than 30 pounds, features a throat that opens to 4-1/2” inches to accept either 4 x 2 or 2 x 4 lumber. It has a push on and release off switch to cycle the unit. A 10,000-psi electric-over-hydraulic power unit pumps hydraulic fluid through a 10,000-psi hose to activate a 10-ton hydraulic cylinder with a 3.9 inch stroke. The unit can be powered by 120v electric power or an optional 120v, 2200-amp, gasoline powered generator, which can also act as a portable power supply out in the field for other single-phase equipment.

NEW!

• Pressing Capability: 4.5” throat opening presses 2×4 through 4×2, includes a standard 25-foot, HD 10,000 PSI hose, with a 10 TON, 4”x4” magnetized pressing plates • Electric/Hydraulic: SPX Hydraulic Technologies – Rockford, IL USA 10,000 PSI / 700 BAR. 10 ton pressing capability • Power Source: 110V Dual Power via outlet plug in and/or optional gas-powered inverter generator at an additional price. Optional generator is a Honda EB 2200i Industrial, inverter motor, manual start, GFCI Protected,120 VAC at an additional cost of $1,450.00.

• Warranty: One year from date of purchase on manufactured unit, OEM warranties on hydraulic and gas motor.

$9,779 FOB MT 765-751-9990

www.woodtechsystems.com

HSF

Hain Systems Framer

T

he Hain Systems Framer (HSF) will help you build square and accurate wall panels for residential or commercial construction applications. It will help you cut building costs by saving time and improving your quality. It’s a reliable, efficient and proven Electrical Supply: 110 VACsimple design. The HSF is based on a proven design with over 20 years of actual production system that features a ruggedly 1/4 HP, 110ItVAC, Linearfully Actuator useMotor: and maintenance experience. comes assembled and is designed for portable job site framing or in-plant permanent Highly Accurate: +/- .010 Inches installation.

The table has many optional attachments and will support Mylar Tape wall layout or any other type of layout. The Stop Rail: 2 x 4 x 1/4 Aluminum Extrusion optional gun rails can also be retro-fit to any table.

Stops: Jig Bored Steel Stop Blocks:

Internal Components: Details: Dimensions: Table Construction:

Air Supply:

Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5Structural feet (60”) to 60 feet (720”) Thick-wall Steel Tubing, Jig Welded for Accuracy Height: 12 inches 90Depth: psi (10 12 CFM Air Flow Recommended) inches

If you are looking for the fastest, mostVAC consistent way to measure and cut your product, 120 Electrical Supply:

then the Hain Measuring System (MEA) is your answer. The MEA changes from one length

Graythe operator’s position on the line. It Powder t any lengthCoat: instantly, up to 60’,Industrial without changing is also highly accurate (+/- .010) and quickly moves from one length to the next in Dimensions: Height: 43”

seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first

time user will be productive withLength: little or no16’ training required. It can adapt to any saw and

or 20’ can be mounted to any surface so that you can integrate the MEA with your existing

Width: Adjustable to 10’ or 8’ operation to 12’ and setup.

The MEA is versatile allowing “left” or 8’ “right” handed

measurement in “feet and inches” or “inches” depending on your preference. The MEA is 3000 lbs Shipping Weight: also available in a “Skid Mounted” version.

theHAINCOMPANY 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Electrical Supply: Motor: Highly Accurate: Stop Rail: Stops: Stop Blocks: Internal Components: Dimensions:

110 VAC 1/4 HP, 110 VAC, Linear Actuator +/- .010 Inches 2 x 4 x 1/4 Aluminum Extrusion Jig Bored Steel Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5 feet (60”) to 60 feet (720”) Height: 12 inches Depth: 12 inches

If you are looking for the fastest, most consistent way to measure and cut your product, then the Hain Measuring System (MEA) is your answer. The MEA changes from one length t any length instantly, up to 60’, without changing the operator’s position on the line. It is also highly accurate (+/- .010) and quickly moves from one length to the next in Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982 seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first time user will be productive with little or no training required. It can adapt to any saw and can be mounted to any surface so that you can integrate the MEA with your existing

EVERY CUT COUNT MAXIMUS ® High-Volume Precision Crosscutting with Integrated Package Aligner and Loop Bander

AUTOCUT ®

High-Volume Automated Crosscutting with programmable PLC Controls

SELECUT ®

High-Volume PET and Market Premium Length Crosscutting with Integrated Power Package Squeeze

TRANSCUT ® II SERIES

Portable Saws priced from $8,990*

Stationary Systems priced from $31,999*

holtecusa.com

Designed to cut whole bunks of lumber to length in less than 60 seconds with an accuracy of +/-1mm (.040”) and leave a planer finish. * It's that simple. *Specifications and prices are subject to changes without notice and results are based on HOLTEC installed V-Series systems using Scratcher® chain technology.

Proper maintenance is essential for accuracy and longevity of cutting components and your results may vary. Photographs may show systems with optional accessories. All trademarks are the property of their respective owners. ©2023 HOLTEC USA Corporation. All rights reserved.

Can you set up and build

these seven trusses

in twenty-three minutes?

We Can. The WizardPDS® - Perimeter Definition System is an automated jig system that reduces set up time by 99%. The WizardPDS® requires NO additional jig hardware or images to accomplish a complete truss set up in 20 seconds or less. The WizardPDS® converts set up time to build time.

Your table, automated.

See how it’s done here!

We bring the best together!

Eide Integrated Systems, LLC

612-521-9193

www.eideintegratedsystems.com

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #71

TRUSS EQUIPMENT

2018 Clark Mini Barn Press 2018 Clark Mini Barn Press, builds rigid frames for sheds from 8 foot to 14 foot spans, to 3′-6″ height. Builds mansard and rafter shapes. Includes (5) track mounted heads with 8″ x 10″ platens, material clamps, 10 HP hydraulic power unit with manifold for air and fluid, ball valve controls, mounting track and all available jigging. 460 volt, 3 phase electrical required. $19,997 FOB TX Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Pacific Peak Up Stacker Used-as-is Pacific Automation 60’ peak up stacker / (4) lift arms with indexing heads / Adjustable pop-up platform / Target for triggering stacking cycle / Powered truss conveyor as shown / Center rolls can be moved to unload from top chord side / Control panel with auto and manual stacking mode. $13,950 Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

1993 Mitek Easy Set 4 Blade Component Saw 1993 MiTek Easy Set 4-blade component saw, with swing-arm central control system, digital/analog display, power length carriage, waste conveyor. Cuts 2″ x 4″ to 2″ x 12″ lumber depths. Cuts to 12″ 4 angle floor webs. 220v, 3ph power. $8,990 FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.com

PHONE: 800-289-5627

2007 Clark Industries Horizontal Truss Stacker Model HVS, Two Unit, 2-Zone, 14’ Horzontal Stacking System. Two lifting units (one master and one slave) with integral electrics. A truss sensing system consisting of adjustable laser sensors mounted on slide rails. One indoor electric control enclosure & panel w/PLC and manual controls. A stacker-conveyor interface package comprised of (1) mounted 3-push button enclosure and (1) remotely mounted 2-push button enclosure (pause/ emergncy stop). Hand-held Wampfler Remote Control System. 8 stacking rails and 4 stripping posts. Stack 1 5/8” thick x 14’ tall trusses up to 30 high. Stack a truss in approximately 40 seconds (cycle time).

Stack up to 55’ or longer trusses on each side of the conveyor with minor assistance for truss sag, shorter lengths can be stacked unassisted. Excludes 77’ Walk Through Conveyor System. Two systems available at $25,000 NOW $19,900 Each. FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEW! WESCANA FLOOR TRUSS MACHINE • 7' x 40' Table with 3/4" Steel Table Top • Two 5' Park Sections • Truss Depths from 12" to 26" • Truss Flip-Over Arms • Side or End Ejectors • Built-In Camber for Clamping on Both Sides • Air Cylinders Under Table • 2 C o n t ro l Va l v e s f o r Clamping

• 1 Control Valve for FlipOver Arms • 1 Control Vlave for Ejectors • 24" Diameter x 1" Wall Thickness Roller • 10 HP / 3 Phase Gear Motor • Front & Rear Emergency Shut-Off Bars • Joystick Control • 2' per Second Travel Speed

800-382-0329 | www.wasserman-associates.com

M ACdverti$er

The

omponent

anufacturing

Serving the Structural Building Components Industry

EMSI Field Repair Press EMSI 10 Ton Field Repair Truss Press System. Complete with: 1/2 HP, 115 Volt, 50/60 Cycle Universal Motor – Operates at voltage as low as 60 volts. 10,000 PSI Portable Power Pack with Two Speed Operation – 200 cu in/min @ 0–200 psi, 20 cu in/min @ 200–10,000 psi and Externally Adjustable Relief Valve (unit weight 55 lbs.). C-Clamp Assembly with 8" Maximum Reach, 4" x 5" Pressing Platen (optional platen available for 4” x 2”). Independent 10 Ton Hydraulic Cylinder. 10’ Hydraulic Hose Assembly with Quick Disconnect Coupling. Handle with 24 Volt Remote Electrical Pendant.

Call for Price Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

NEW! NEW IDLE & POWERED 14' TRUSS CONVEYOR (AZ) • 14' Long x 4" or 5" (Inside Diameter) Schedule 40 Pipe • Tube Steel Stands (7" Height Adjustment - Height to be Specified) • 4 Bolt Flange Bearings • Idle and Motorized Rollers • 1/4 HP Motors (240/480 Volt-3 Phase) with Controls • 1" and 1 1/4" Cold Rolled 24" Shafts Baffled • 6 to 8 Week Delivery

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #72

Navigating Productivity Improvement Programs: The Vital Role of a Change Agent

I

n manufacturing, continuous process improvement is critical to maintaining profits and quality. Transforming and enhancing operations, however, demands more than good intentions; it requires a dedicated change agent focused on ensuring the program is implemented and ingrained into ongoing plant operations. While it may be tempting to assign change management responsibilities to an existing employee part-time, this approach is risky, especially when business volume peaks in the busy season.

By Thomas McAnally TheJobLine.com

In the seasonal ebb and flow of manufacturing, the off-season often seems opportune for designating a part-time change agent and implementing new programs or processes. They appear to have the time to manage the process. However, the challenge arises when the busy season hits, and the rest of the team is running full tilt to meet production demands. At this crucial juncture, the part-time change agent is confronted with a daunting decision: which job to prioritize – their regular duties or their part-time change initiatives.

This dual role burdens the individual and exposes the entire team to potential pitfalls. When business picks up, everyone operates at full speed, trying to implement changes and improvements while maintaining increased output. The absence of a dedicated change agent means there’s no one to keep the team on track. Each team member, absorbed in their specific tasks, risks veering off course and inadvertently falling back into old familiar ways.

The part-time change agent, torn between their regular responsibilities and the transformative agenda, may find it challenging to rally the troops during these high-pressure periods. Without a dedicated leader, the team’s collective focus falters, and the carefully planned changes lose momentum. Like a ship navigating rough seas without a captain, the factory faces the danger of drifting off course and reverting to old habits.

In this dynamic landscape, it becomes evident that a full-time change agent is not just a luxury but a necessity. Their exclusive focus ensures that the factory’s compass remains true, even when the storm of increased business volume hits. They serve as the guiding force, steering the team through the challenges of transformation and preventing lost momentum and potentially having to abandon the program for another time, further wasting investments in time and expense.

You may have the perfect person to dedicate to the change agent role, or you may need to hire one. If you are a sizeable multi-plant company, this agent can serve multiple locations, spreading the cost out over several process improvements. Importantly, once you take the first step in changing for the better, be sure to stay on the path and keep focused to reap the rewards.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #73

Adverti$$er

PANEL EQUIPMENT

2007 VIKING 16' X 12' SQUARING TABLE WITH SHEATHING BRIDGE • 16' x 12' Squaring Table with Powered Width Adjustment & Powered Chain Conveyor • Wall Panel Lengths up to 16', Wall Panel Heights from 4'-0" to 12'-2" • Swing Gates at Both Ends of Squaring Table • Automated Field & Edge Nailing Driving by Panel Pro Event Software & Your Programmed Nailing Patterns • Simple Touchscreen Controls • 2 Tool Carriages for Sheathing Nailing with Tilt Function for Seams • 2 Paslode Nail Guns with High Load Coil Tray • Auto Sheathing Bridge Return • Includes 4 Pallets of Magnum Coil Nails (2 3/8 x .113) • 480 Volt / 3 Phase $29,900 FOB KS. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2021 Triad Router Bridge & Portion of V-Track 2 0 2 1 Tr i a d R o u t i n g B r i d g e w i t h approximately (20) feet of v-track. Fits over tables that build up to 12′ nominal height wall panels. Includes powered automatic bridge return, powered vertical router movement, manual fine adjustment wheel, manual vertical router travel with chain drive and (1) Milwaukee router, catalog #5625-20 120 volt, 1 phase, 15 Amp electrical required. No table included. $28,970 NOW $5,000 FOB BC Wood Tech Systems 765-751-9990 www.woodtechsystems.com

NEW! New Panels Plus Floor Cassette Framing Station Price: $Call for pricing FOB: MN

Generation 3, Used 2018 Triad Framing Table The Generation 3 Framing Table has adjustable 20’ long walls. With just a push of a button, the width adjustment clamp is activated to clamp and square all components. The Generation 3 Framer features a wider table top, designed with the framer in mind. Our new Anti-Slip Surface allows the operator to work on a comfortable and safe surface.

Call for Price Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

A

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

IBS Tool Bridge & Router Bridge IBS multi-tool bridge with (24) tool stations.

Bridge features auto-return, button controls and laser guide mount. Fits up to 12′ nominal rail centers. IBS router bridge features (1) router, laser guide mount and lever-switch button controls. Fits up to 12′ nominal rail centers. Sold as a pair.

Includes all available floor mounted, v-rail.

Both bridges missing laser sub-assembly.

120vac, 120psi air. $15,975 NOW $5,995 FOB UT Wood Tech Systems 765-751-9990 www.woodtechsystems.com

• • • •

New Wall Panel Lift 8' to 12' Wall Heights 1,000 Lb Capacity Weight: 120 Lbs Excludes: Electric Hoist & Freestanding Bridge Crane $1,950 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

New Panels Plus floor framing machine, supports the structural members creating floor sections from 2" x 6" LVL through 2" x 10" to 2" x 12" dimensional lumber, 20" deep wood floor trusses or engineered wood / I-joists. Standard footprint of floor panels (cassettes) up to 12' wide x 45' long. Table consists of a fixed section and a track-guided, moveable section controlled by either a foot switch or push-buttons.

Includes a series of color-coded locator pins at 16", 19.2 and 24" on-center spacing and clamping with squaring feature including foot pedal control.

The locators individually flip down if a joist comes out on top of them. After the floor is complete and unclamped, the floor section can be raised up on skate-wheel conveyors and rolled out or lifted off the table using an overhead crane. Table height is 24.5", OAL 45.5 ft, OAW 14.5 ft. 120 volt, 1 phase, 15 Amp electrical required. 90 to 120 PSIG at 15 CFM air required.

765-751-9990

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #74

2022 Vekta Stakpro Horizontal Truss Stacker $875,000 FOB WI

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #75

Equipment Details • 14 Each - StakPro Truss Booms • 4 Each - Stacking Zones, Master Control Panels, Automation Kits and Remote Controls • Outfeed Truss Rollers with Control Panel (12 Powered & 11 Non-Powered Rollers) • 2 Each - Truss Stack Rollers with Contol Panel (8 Four Roller Sections on Each Side of the Outfeed Rollers) • 8 Each - Pop-Up Stripping Posts Layout PDF • 2 Each - Outside Stack Rollers (4 Four Roller Sections) Click Here • 480 Volt / 3 Phase

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Put our 40+ years of experience building Tilt Tables & Flip Tables to work for you!

Only Triad provides an entire RANGE of Tilt Tables, Flip Tables, and Transfer Tables - tailored to fit your particular needs.

p r o ven p o w er hyd r auli c s (n o t ai r )

All Triad Machines offer: S ee M ORE : you t u be.com /@Tr iadM achines/sear ch?qu er y=t ilt

• Proven designs • Experienced engineering department • Built to YOUR specific requirements • Fastest Lead Times in the Industry • Expert Installation

W' Aoor Builder System

Experience you can trust. www.TriadMachines.com

I P.O. Box 130 Alda, NE 68810

800-568-7423 Ext. 133

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #77

Fitzgerald Group, LLC a blending of excellent services and products, with answers that work...!© Not producing the results you need or want – getting conflicting info about what to do and the equipment and the systems you may need?

Before you Buy - Ask yourself – do I need a salesman or a guide?

If you want an Independent Guide that has your bottom-line results as the #1 priority, Call Me. If the salesman will do - we'll talk later...

2019 Triad Steel Interior Framing Line Wall framing line with model DQSF Diamond Quad framing station, RO-CAT tables and conveyors, designed to frame steel stud wall panels from 6′-9″ to 10′-3″ in height, to 16-ft long. Framing station includes two (2) twin-tool dollies with optional outlets and monitors, stud locators at 16″ and 24″ o/c spacing, and four (4) Senco SG2510 tools. Station clamps and includes pop-up skatewheel conveyors. Pair of RO-CAT tables include squaring lip, tool rest and pop-up skatewheel conveyors. Line includes two (2) 10-ft long stand-alone skatewheel conveyors and two (2) 15-ft long x 36″ wide, stand-alone idler roller conveyors. 100 PSI air required. 120 volt, 1 phase electrical required.

765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

Also, don't let Financing Deals influence your best solution. FitzGroup can arrange – Zero down & No payments for 90 Days!

Please be assured that your investment with any of our selected partners will not cost one penny more with the Fitzgerald Group as your purchasing contact. In addition, you will receive the full advantage of our Partner Relationships and Services NOT offered elsewhere.

RFitzgerald@FitzGroup.com 719.528.5445

Read/Subscribe online at www.componentadvertiser.com

www.FitzGroup.com FAX: 800-524-4982

Wasserman & Associates Wall Panel Line Accessories

t w en Ne ipm u Eq

nt ew me N ip u Eq

Wall Panel Lift * 8’- 12’ Wall Height * 1,000 LB Capacity * Easy Adjustment * Hoist and Crane Sold Separate

$1,950.00

Handle Bar Router * 8’ - 12’ Wall Height * 2 Person Operation * 3 ¼ hp Production Router * 120 Volt /1 Phase/15 Amp

$3,000.00

Lay-Up Tables * 10’ x 10’ Working Area * Lift & Extend Rollers * Squaring Lip * Gun Holster And Nail Tray $13,000.00

Skate Rollers * 15’ Standard Length * Adjustable Height * Sturdy Stands * Custom Lengths Available

$3,250.00

EST. 1991

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #79

Adverti$$er

PANEL EQUIPMENT

NEW! New Component Table with Skatewheel Conveyors Lift & Extend Skatewheel Conveyors. 10' x 10' Work Area with Squaring Lip. Gun Holster & Nail Tray. $13,000 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

JobLine.com, inc.

CLICK HERE for more information

The

800-289-JOBS

Time To Hire?

We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com

New Panels Plus Wall Panel Framing Equipment

Consider Panels Plus wall panel assembly equipment for manufacturers of wood or steel wall panels, floor-panels, and related framing components. Panels Plus is an employee owned, ISO certified, manufacturing company that builds state-of-the-art equipment featuring durable construction, with fit and finish second to none in the structural building component industry. The referenced base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches.

This framer design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality.

Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages.

Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge.

Squaring stations, sub-component tables, conveyors and panel lifts are also available to complete the configuration of the wall panel assembly line. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical.

765-751-9990

STRICTLY CONFIDENTIAL!

www.woodtechsystems.com

HSF

Hain Systems Framer

T

he Hain Systems Framer (HSF) will help you build square and accurate wall panels for residential or commercial construction applications. It will help you cut building costs by saving time and improving your quality. It’s a reliable, efficient and proven Electrical Supply: 110 VACsimple design. The HSF is based on a proven design with over 20 years of actual production system that features a ruggedly 1/4 HP, 110ItVAC, Linearfully Actuator useMotor: and maintenance experience. comes assembled and is designed for portable job site framing or in-plant permanent Highly Accurate: +/- .010 Inches installation.

The table has many optional attachments and will support Mylar Tape wall layout or any other type of layout. The Stop Rail: 2 x 4 x 1/4 Aluminum Extrusion optional beBored retro-fit Stops: gun rails can also Jig Steel to any table.

Stop Blocks:

Internal Components: Details: Dimensions: Table Construction:

Air Supply:

Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5Structural feet (60”) to 60 feet (720”) Thick-wall Steel Tubing, Jig Welded for Accuracy Height: 12 inches 90Depth: psi (10 12 CFM Air Flow Recommended) inches

If you are looking for the fastest, mostVAC consistent way to measure and cut your product, Electrical Supply: 120

then the Hain Measuring System (MEA) is your answer. The MEA changes from one length

Powder Graythe operator’s position on the line. It t any lengthCoat: instantly, up to 60’,Industrial without changing

is also highly accurate (+/- .010) and quickly moves from one length to the next in Dimensions: Height: 43”

seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first

time user will be productive withLength: little or no16’ training required. It can adapt to any saw and

or 20’ can be mounted to any surface so that you can integrate the MEA with your existing

Width: Adjustable to 10’ or 8’ operation to 12’ and setup.

The MEA is versatile allowing “left” or 8’ “right” handed

measurement in “feet and inches” or “inches” depending on your preference. The MEA is Shipping Weight: 3000 lbs also available in a “Skid Mounted” version.

theHAINCOMPANY 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Electrical Supply: Motor: Highly Accurate: Stop Rail: Stops: Stop Blocks: Internal Components: Dimensions:

110 VAC 1/4 HP, 110 VAC, Linear Actuator +/- .010 Inches 2 x 4 x 1/4 Aluminum Extrusion Jig Bored Steel Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5 feet (60”) to 60 feet (720”) Height: 12 inches Depth: 12 inches

If you are looking for the fastest, most consistent way to measure and cut your product, then the Hain Measuring System (MEA) is your answer. The MEA changes from one length t any length instantly, up to 60’, without changing the operator’s position on the line. It is also highly accurate (+/- .010) and quickly moves from one length to the next in Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982 seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first time user will be productive with little or no training required. It can adapt to any saw and can be mounted to any surface so that you can integrate the MEA with your existing

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #80

Design Connections

Geordie Secord, Senior Recruiter TheJobLine.com – Canada

Where Does the Responsibility Lie?

I

n “Cost-Saving Measures and Memorable Debacles,” I discussed the problems encountered on a site where the owner was acting as general contractor for his new house build and problems that ensued when an inexperienced framer was tasked with installing a complex truss roof. In that article, I wondered if a qualified general contractor could have ensured that the project stayed on track better. The key word here is “qualified,” and by that I mean someone that is actively involved in all aspects of the project to ensure that a quality, well-constructed building is the result.

I have recently been involved in a small commercial project. It’s only a slight variation on countless projects that I have been involved with in the past – simple mono pitch trusses on one end of the building, and a flat EWP roof on the other end across a gas station, convenience store, and coffee shop. Architecturally, it was quite simple, and at the time we quoted the project we asked for two simple truss dimensions (heel height and finished overhang) to be confirmed during shop drawing review. Structurally, there were questions in the EWP area regarding connections to steel framing. Both questions were important, but not complicated by any means.

At the time the contract was signed, we mentioned the confirmations needed once again and were assured that they would be addressed in shop drawing review. We issued our shop drawings – with the confirmations needed highlighted – approximately 3 months in advance of the expected delivery date, although slow site progress meant that delivery was later pushed out an additional 2 months.

A month and a half or so went by before reviewed shop drawings came back, with neither of our questions answered. The GC was reminded that we couldn’t finalize drawings for production or order custom hardware without this information. Another round of shop drawings, and another month or more, and still no answers. At this point, the GC began to be concerned about having a roof to install on the building and eventually asked us to coordinate discussions with the architect, engineer, and the framer that had been brought in late in the discussions. We reminded them that, while we were happy to be involved in the discussions, it was up to the GC to deliver the building so the GC should be leading all discussions between the various parties.

Only when the framer, faced with the prospect that his crew would have nothing to do on site, became intimately and loudly involved with the process did things start to move. The project engineer Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #81

signed off on connections to the steel, and the architect signed off on dimensions. Days before we were set to go to production, and less than two weeks before delivery, the framer visited the site to survey the steel frame that had recently been installed. It quickly became apparent to him that the truss heel of 15” that we had confirmed was not close to matching the heel of approximately 22” needed to match the adjacent steel framing. A minor change on our end, a midnight review by the GC and engineer, and we were good to go once again.

But there was no happy ending to be had yet. Although the architectural drawings clearly showed a 2/12 (9.5 degree) roof slope, the steel was somehow produced to something like 1.9/12 (9 degree) – despite a clear notation on the steel shop drawings showing 2/12. The structural steel supplier claims that 9 degrees is shown somewhere on the structural drawings although I can’t find it, but time will tell who is eventually held responsible. After much discussion about various methods that could be used to mask the inconsistency, it was finally decided that new trusses would need to be built – a cost of approximately $18,000. Of course, the site is at a stand still while we rush trusses through the shop before Christmas.

I am sure there will be no end of finger pointing as responsibility for this is discussed in the coming weeks. So, who is responsible here?

•

Should we, the truss suppliers and “last ones in,” have reviewed not just the notes on the steel drawings but also the dimensions and math, and found that the pitch was wrong? I strongly believe that since we followed the drawings there should be no blame directed at us.

•

Should the architect have checked steel elevations against our drawings and noted that there was a discrepancy? In today’s CAD world, it would have been a simple matter to overlay the steel and truss drawings to see a pending problem.

•

Does the engineer bear any responsibility here? I would say no, because this is an aesthetic and not structural issue, but there will be questions asked, especially if there is a 9-degree slope indicated somewhere.

•

And what about the GC? As coordinator of the project, where does their responsibility lie? I often see the GC as being something of a coach to all the various sub-trades that are needed to work to deliver the project. They need to be sure that everyone is working as a team.

Clearly that wasn’t the case here.

What are your thoughts? Have you had projects go off the rails because of poor project management? Where do you draw the line for where your responsibility ends, and how do you protect yourself by ensuring that line is clearly drawn?

If you want help finding that next perfect component designer or design job in Canada, please contact me. If your work is in the mass timber world anywhere in North America, I’d love to talk to you about connecting you to that next great job or candidate. You can reach me at secord@thejobline.com, or 800-289-5627 ext. 2. I’m also happy to engage at: LinkedIn.com/in/geordiesecord. www.thejobline.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Welcome to the Rolsplicer Generation II Designed to efficiently splice two pieces of lumber together, handling 2x4 or 2x6.

It uses nail plates to create cords for floor trusses, or where required longer top and/ or bottom plates for walls.

The Rolsplicer has been updated and is now stacked with more benefits: ENHANCED SAFETY FEATURES

GREATER ALIGNMENT

EASE OF USE

Visit our website to learn more and to see the capabilities of the Rolsplicer in action.

E sales@spida.com

T +1 866 647 7771

Continued next page

spida.com

See it for yourself:

Scan the QR code to see the machine in action: BIG game-changer You’ve GOT to see THIS. Now THIS is impressive! over

133

“Over the years, Alpine has proved to be a strong business partner by providing us a tailored plant management solution and focusing on unique advancements in engineering software to improve the efficiencies of both production and design.”

— Aaron Nichols, ABC Truss

Alpine has it all — the right equipment, user-friendly software and dependable hardware to improve your teams efficiency. Alpine delivers the complete package for success — including comprehensive support and service that sets us apart within our industry.

Ask those who know. They’ll tell you about the people at Alpine who make a difference.

BUILD MORE. alpineitw.com | 800.521.9790

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #85

NEW!

New Panels Plus Combination Table

Price: $Call for pricing FOB: MN 765-751-9990

www.woodtechsystems.com

Triad 12 ft Gen II Sheathing Bridge & Track

2007 Panels Plus Steel Wall Panel Sheathing Station $74,970 NOW $68,997 FOB MN 765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

Triad Generation II nail tool bridge with 60 ft of v-track, refurbished by Triad in 2021. Maximum panel height clearance 12′-3″. Includes locations for (3) tool mounts along the middle beam, top & bottom plate tool mounts, tilt-tool option, joy-stick controls, power bridge return, e-stop button, all available Paslode tool mounts, manual and all available spare parts. 120 volt, 1 phase electrical required. 100 PSI air required.

$75,971 NOW $25,000 FOB CO 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

Valuable

WEBSITE Resources Visit msrlumber.org to find: • Sources for MSR Lumber

Filter by species, grade and dimension to locate products from MSRLPC members.

• Educational Resources

Find helpful information for current and potential MSR lumber users.

• NEW! Design Values Comparison Tool

Compare MSR lumber reference design values with visually graded dimensional lumber by species.



The MSRLPC website is a one-stop shop for lumber buyers looking to make informed purchasing decisions as well as those exploring design optimization with MSR Lumber. Check it out!

LEARN MORE AT:

msrlumber.org

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #87

Adverti$$er

SINGLE BEAM

SHEATHING STATION The Single Beam Sheathing Station offers flexibility in fastener spacing both in the field, on seams, and while stitching the top and bottom plates. This Sheathing Station fastens sheathing to wood wall panels to ensure quality panels every time.

BENEFITS • Ergonomic working height • Flexibility with fastener spacing • Fastens consistently and accurately • Reduces the risk of “shiners”

WWW.PANPLUS.COM

1-866-726-7587

PANEL EQUIPMENT

A

Th e

Carlson Mobile Framing Table • Wall Lengths to 16' • Manual Height Adjustment (7'-0" to 9'-3" wall heights) • Tool Dollies with Senco Nail Guns • Stud Locators • Pop-Up Skatewheel Conveyor • 1" Stroke Air Clamps • Tool Box $14,900 FOB VA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Like Money in the Bank.

Service you can count on!

M ACdverti$er

The

omponent

anufacturing

Serving the Structural Building Components Industry

NEW!

NEW 12' X 16' FRAMING TABLE

• Pop-up Skatewheel Conveyor • Powered Height Adjustment (6'-11" to 12'-5" wall heights) • Fixed Squaring Stops • Excludes Tool Dollies • 110 Volt / 20 Amps • Add $6,000 for Stud Locators at 16" & 24" O.C. • Add $2,750 for 1 Pair of 15' Skatewheel Conveyor with Stands

• Add $11,900 for Sub-Component L a y u p Ta b l e s w i t h P o p - u p Skatewheel Conveyors • EQUIPMENT FINANCING available from SLS Financial Services

$38,000 FOB NE

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #88

The Year in People: 4 of LBM’s Top Placement Firms Assess a Tight Market

W

ebb Analytics’ monthly people roundups have tracked changes involving 1,241 folks at hundreds of LBM operations this year.

Thousands more jobs that we didn’t spot likely have changed hands, in part through help provided by construction supply’s leading recruitment and job-placement firms.

Recently, Webb Analytics asked leaders from The Misura Group, SnapDragon Associates, Building Gurus, and LBM Executive Recruiting for their views of what happened in 2023 and what you can expect in 2024. Here’s a summary.

Craig Webb President, Webb Analytics

Huge Salaries Sky-high lumber prices in 2021 and 2022 generated high profits and, in turn, “compensation increases at a rate I have never witnessed in 25 years,” The Misura Group’s Tony Misura said.

“General Managers who once received $40,000 bonuses earned $100,000 to $200,000 bonuses.

The number of OSRs making over $1 million in commission has gone from a news story to commonplace.”

Most In-Demand Jobs For The Misura Group, it was General Managers for Truss and Wall Panel plants. For Rikka Brandon of Building Gurus, it’s yard workers. “It’s a challenging job, requiring physical strength, working out in the elements, and it often doesn’t pay competitively,” she said. “This leads to a lot of applicants, a lot of no-shows for interviews, and a lot of short-term employees. It’s time-consuming, expensive, and exhausting to have a critical part of your business feel like it’s got a revolving door.

If you consider [the Society for Human Resources Management’s] belief that turnover costs 30% of the individual’s annual salary. This is a huge ‘invisible’ cost to most companies.”

Holistic Leaders and Integrators At SnapDragon, the most challenging role to fill was well-rounded senior leaders “who possess a comprehensive understanding across a more significant portion of business, including sales, IT, operations, and finance,” Mark Barnard said. “These senior leaders are expected to navigate complex challenges, drive growth, and make strategic decisions that impact the entire organization.”

Jim Enter, who works with Bill Tucker on LBM Executive Recruiter projects, said he regards as refreshing clients who now are willing “to look at candidates for senior level positions that may bring fresh perspectives from other industries. As one client told me, ‘We function like everyone else in the industry, I am looking for fresh approaches to how we manage our business.’”

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #89

Tony Misura said one big theme in 2023 was the demand for people who can integrate businesses.

“In 2021–2022, we saw a raft of acquisitions and consolidations; they kept operating as status quo, often held together with duct tape and baling wire,” he said. “It takes an exceptional leader to blend cultures and create an alignment of goals and a shared risk environment. One client had nine different ERPs to integrate.”

Expect integrators to be the most in-demand job in 2024, he said. That’s a change from 2023, when Directors of Purchasing were most in demand.

Staff Development Barnard and Brandon both said they’ve noticed more emphasis on companies developing their own staffs as part of increased succession planning. “Many leaders seem to be aware that this is a significant challenge and it’s unlikely to get better in the next 5–10 years,” Brandon said. “So, they’re being proactive and looking at ways to become an employer of choice, train/grow their own, and retain their current employees.”

Added Barnard: “Building Products clients are prioritizing the development of their overall bench strength. This means building a strong pool of qualified candidates who can fill various roles within the organization. It involves talent acquisition strategies continuously identifying, attracting, and nurturing potential employees to ensure a robust talent pipeline.”

Heavy Demand for Recruiters We saw an increase in the number of companies reaching out to us to help with critical and urgent positions,” Brandon said. “This isn’t surprising due to the lower volume of experienced talent in our industry. I noticed that there seemed to be less ‘sticker shock’ this year for leaders and companies that haven’t worked with a professional recruiter in the past.”

SnapDragon experienced the most significant growth in its 20-year history, shattering its records for successful hires and for billing.

It’s a Seller’s Market, So Expect to Pay Up Combine market competition, skills shortages, cost of living issues (especially if moving is involved), and greater transparency on salaries and benefits, and it’s prospects that have an advantage in negotiations these days, the recruiters said. That has made recruiters’ job tougher; despite doubling its resources for data and recruting, it still took The Misura Group 50% longer on average to fill a job. “Comments like, ‘My boss is an ass, the company culture is toxic, but I am making more money than I ever have in my life’ has been a typical response from talent,” Tony Misura said.

Webb Analytics is a data and research consultancy that helps executives in construction supply spot the trends, threats, and opportunities that matter most. It’s led by Craig Webb, one of the nation’s best-known industry figures and the former editor-in-chief of ProSales, the construction supply industries most honored publication. Aside from the Construction Supply 150, Webb Analytics also produces an annual deals report, consults with dealers, publishes research reports, and speaks at industry events.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Wasserman & Associates Framing Table With Panel Bridge

One Ta ble Sys

tem $9 4,

-Laser Pointer -Bridge Auto Return -Bridge Tilt at Sheathing Seams -Programmable Fastener Patterns -Pop-Up Skatewheel Conveyors -6’-11” to 12’-5” Wall Heights -Fixed Squaring Stops -No Floor Rails

900

*Inclu des Ins t h e United tallation Sup Wasserman & Associates p States & Can ort in 2341 Shepard Rd ada Milford NE 68405 Phone: 800-382-0329 Web: www.wasserman-associates.com

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

New ProStack

2007 Panels Plus Combo Table with Multi-tool Bridge

Wall Panel Stacker

Developed for commercial wall panel production facilities this is the remarkable ProStack, fully automated wall panel stacker. The ProStack relieves your build team from creating a stack of wall panels and keeps them building walls instead. Stacks 2×4 through 2×8 walls up to 20′ in length and up to 12 feet in height. The ProStack automatically centers each layer including multiple wall segments on the same layer, and the ability to “create” fork lift pockets for ease of loading in your yard or on the build site. It can stack left, right or center-justified. Designed without any overhead frame or apparatus, so no crane inspections are required. The ProStack is “event driven”, so there is no need to read a file. See the video link. 208 volt, 3 phase, 43 Amp base model electrical required. No air required. Footprint is 26′-5″L x 19′-3″W.

2007 Panels Plus Combination Table, allows you to frame, square and sheath wood wall panels on one,16 foot long table $49,991 NOW 39,991 x 12 foot framer for wall heights from 6′-9” to 12’FOB TN 4”. Builds both 2×4 and 2×6 walls. Clamps wall prior to nailing. Table includes push button controls, color-coded stud locators at 16 inches & 24 inches o.c. spacing, squaring stops, motorized telescoping arms, skatewheel ejectors and powered tool bridge. Sheathing nailing bridge includes powered travel, joy-stick & key pad controls, air manifold, manual fine tuning, tilt and seam nailing. No tools or mounts included. 30 CFM at 120 psi air required, and 120 volt, 1-phase electrical required.

765-751-9990

765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

www.woodtechsystems.com

2021 Panels Plus Panel Tilt Table.

ProStack II can operate with your existing powered conveyors or select optional matching conveyors.

ProStack Wall Panel Tilt Infeed Conveyor: System can tilt wall panels (12’W x 16’L) to approx. 75º for working access to install blocking, windows, or inspection/repair of “shiners” on sheathed wall segments. System utilizes hydraulic power from an existing ProStack wall panel auto-stack system. 208 volt, 3 phase, 52 Amp Powered Infeed Conveyor section, Chain drive under top and bottom plate for access to inspect sheathing fasteners – 12’W x 16’L, adjustable working height from 28” to 34”. 208 volt, 3 phase, 52 Amp Powered Out-Feed Conveyor section, full-width, HD roll-top for easy access to banding operation. 12’W x 16’L, adjustable working height from 28” to 34”.

208 volt, 3 phase, 52 Amp For additional features of the ProStack Wall Panel Stacker, click here.

January 2024 #16294 Page #91

$53,995 FOB AZ 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

2021 Panels Plus Panel Tilt Table. Receives and tilts wall heights from 6′-8″ to 12′-4″, lengths to 16 foot, angles to 75 degrees from horizontal, locking design to allow work on both sides of panel, pneumatic operation, pedestal control with push buttons and rolling in/out panel transfer.

90-120 PSI at 15 CFM air required. 120 volt, 1 phase electrical required.

www.woodtechsystems.com FAX: 800-524-4982

IMPROVE CONSISTENCY INCREASE EFFICIENCY The Industry-Leading Manufacturer of Panelized Wall Panel & Floor Cassette Equipment.

FLOOR CASSETTE STATION The Panels Plus Floor Cassette Framing Station is designed to hold joists in a square position for fastening decking. This model can be stand-alone or integrated into a full production line. Dimensional lumber, I-joists, and open web floor truss configurations are all compatible with this floor cassette table.

The Panels Plus floor cassette system is developed at a lower working height, so fall protection is not required when fastening decking. The floor cassettes also pop up upon completion and can be rolled out or picked up with a crane for easier product transfer.

OUR POPULAR PANELIZING PRODUCTS

WOOD WALL FRAMING STATIONS

WOOD WALL SQUARING STATIONS

WOOD WALL SHEATHING STATIONS

LIGHT GAUGE STEEL FRAMING & SHEATHING

WWW.PANPLUS.COM

1-866-726-7587

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Your Solution for Lack of Technical Staff

● PlanSwift Lumber and Building Material Takeoffs ● Truss and Wall Panel Design Experienced Staff ● EWP Layouts and much more!

Eliminate your lack of technical resources to grow sales and increase the clock speed of your company Dave.AllPoints@gmail.com • www.AllPoints.Tech The Gold Standard in Technical Support Teams

Adverti$$er

January 2024 #16294 Page #93

$37,900 NOW $29,900 FOB Ontario 2014 TRIAD RAKE WALL TABLE • Wall Lengths to 12' • Wall Heights to 40' • Powered Height Adjustment • Manually Adjustable Rake Side (0 to 12/12 pitch) • Adjustable Squaring Stop

• Pop-Up Skatewheel Conveyors • Stud Locators at 16" and 24" Centers • Center Support Bar with Stud Locators • Excludes Tool Doilies • Price is in US Dollars

800-382-0329 | www.wasserman-associates.com

JobLine.com, inc.

The

$40,997 FOB CA

800-289-JOBS

Used Triad G2 Wall Assembly Equipment

Time To Hire?

We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com STRICTLY CONFIDENTIAL! PHONE: 800-289-5627

Used Triad wall assembly equipment includes 16 ft x 12′-3″ max height framing station, model G2, with (2) two-tool dollies, squaring/ sheathing combo table, model G2 SH-SQ, with multi-tool mount nailing bridge and separate manual-drive router bridge, quantity of (6) 10 ft long x 2 ft wide idler roller conveyors with (4) legs, and Triad model FTCN component nailing station with four Hitachi NR83A nail tools.

Framer includes 16″ and 24″ color-coded stud locators, pop-up skate wheel conveyors, tool dollies have two tool mounts each (no tools) and powered height adjustment. Sheathing bridge includes joy-stick controls, tool offset, tool tilt, laser guide, power return and mounts for up to (23) Hitachi nail tools. Router and all available spare parts included. 120 volt, 1 phase, 30 Amp electrical required. 100 PSI air required.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #94

Adverti$$er

Floor Truss Splicing

By MiTek Staff

A

splice is the point where two chord members are joined together by a metal connector plate to form a single member. It can occur at a panel point or between panel points depending on the specific design of the truss and the preferences of the truss manufacturer.

While the program checks all the connections properly, it must always be remembered that MiTek Engineering software is just that, a tool. Designs should always be reviewed before putting into production, some designs may not be structurally viable and should be avoided or reviewed by an engineer. The following is a list of some of the most common problems of floor truss splicing MiTek engineers see when reviewing customer truss submittals.

Floor trusses that are designed with stacked chord members must be given special attention to the location of splice plating. When you have stacked chords, you will want to stagger the splices at least a foot apart. This will insure there is ample room for all connector plates and they are not stacked on top of one another. The main advantage to having splice plates staggered at least a foot apart is due to the fact if they are placed in the same location you will end up with a small gap where the plates are touching which is not ideal for the overall truss performance.

Correct Incorrect

Splicing in the chase is only allowed if there are stacked chord members in the chase area and only one spliced joint is permissible. Floor trusses designed with single top and bottom chords shall not have spliced joints in the chase area.

Correct

Incorrect PHONE: 800-289-5627

Incorrect

Read/Subscribe online at www.componentadvertiser.com

Continued next page

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #95

Adverti$$er

Do not splice in end panel of top chord when truss is top chord bearing.

Correct

Incorrect

It is also recommended to keep from having multiple splices in the same truss panel and to avoid placing splices above each other in top and bottom chords.

Not recommended

Not recommended

For additional information, or if you have questions, please contact the MiTek Engineering department.

MSR WORKSHOP APRIL 17-19 2024 Register by 3/15 & SAVE! Early Bird Pricing: $675 Member • $750 Non-Member

Wednesday, 4/17

Thursday, 4/18

Friday, 4/19

Golf Outing Social Hour Independent Dinner

Educational Sessions Tour Hosted Dinner

Educational Sessions Roundtable

FIND MORE DETAILS & REGISTER AT:

msrlumber.org/workshop

PHONE: 800-289-5627

Fairfield Inn & Suites Charlotte Uptown Charlotte, North Carolina Hotel Deadline: April 3

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Think big…

Think Ranger RS.

Every Ranger Retrieval System is built to order--up to 130'/ 40m long. Fill the carts and feed the saw for an entire shift.

The Ranger never misses a beat.

Acer Inc. 301 Industrial Drive Rushford, MN 55971 507-864-2220 www.acerinc.com

RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244 and other patents.

A

Th e

Component Manufacturing dverti$ dverti $ er

2003 JDH TRUSSMASTER SIDEOFFLOADING TRUSS TRAILER 10,000 Lb Tandem Axles (Dual Wheels).

26,000 GVWR. Deliver Trusses Vertically.

Stretch from 18' to 38'. Raise Loads Hydraulically. Air Brakes. $6,900 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2001 Moffett M5500 Forklift 2001 Moffett M5500 forklift features 48″ forks with side shift, 12′ maximum lift height, 5,500 lb lift capacity and has 2,440 hours on it. Kubota 4 cylinder Diesel engine and Hydrostatic transmission. $24,990 NOW $19,890 FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Reconditioned Lakeside 36'-51' Stretch Roll-Off Trailer • Self-Contained Hydraulic Front End • Sliding Tandems • Roller Locks • Headache Rack • New Axles (Undercarriage) • New Wheels, Tires & Brakes • New Hydraulic System • New Wiring & Light Sockets • Sandblasted & Epoxy Painted • DOT is Current $40,000 FOB ME Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #97

Adverti$$er

TRUCKS & TRAILERS

• • • • •

1995 Pines 45' Chip Trailer Modified by LMI TENN 8" Floor Cross Members Reinforced Roof 22.5 Tubeless Tires Sliding Tandem Axle (for weight distribution) (FOB PA) $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Imperial 53-ft Roll-off Trailer 2005 Imperial roll-off trailer, 53-ft long, ABS, locking rollers, sloped load, (8) winch tie-downs with straps. Brakes 70%, tires 95%. Current DOT inspection through September ’23. Infeed deck in photos not included. $15,591 FOB FL Wood Tech Systems 765-751-9990 www.woodtechsystems.com

1999 JDH Trussmaster 48' Roll-Off Trailer • Hydraulic Front End • Sliding Tandems • Roller Locks Roller Brakes (not working) • • Winches & Straps • Headache Rack Tires & Brakes are Good • • DOT is Current $19,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1997 Lakeside JDH Trussmaster 36-51 ft Stretch Trailer (OR-1) 1997 Lakeside JDH Trussmaster 36′51′ – Lakeside trailer features 5th-wheel connection, sliding tandem axle, locking rollers and hydraulic lift neck. Current DOT inspection September 2023. 50% brakes and 50% tire tread remains. 26,000 GVWR $28,997 FOB MO Wood Tech Systems 765-751-9990 www.woodtechsystems.com

1993 JDH Trussmaster 48'-70' Stretch Roll-Off Trailer • Fixed Tandem • Spring Suspension Roller Locks • • Winches & Straps • Headache Rack Tires are Good (less than 5,000 • miles on tires) • DOT is Current • Video available upon request $19,900 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2023 Stoll 40' Truss Tran Gooseneck Roll-Off Trailer • (2) 12,000 Lb Axles • Hydraulic Disk Brakes • 4" Pipe Rollers • Hydraulic Roller Locks & Brakes • Support Rollers Over The Gooseneck • Diamond Metal Plate Between Rollers • (8) Winches & Straps • Single Cylinder Scissor Hoist • Self Contained 12 Volt Hydraulic Pump • Remote Control • Lightly Used • Ready for immediate delivery $49,900 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

A

Th e 1997 Lakeside JDH Trussmaster 42-60 ft Stretch Trailer (BL-2) 1997 Lakeside JDH Trussmaster 42′60′ – Lakeside trailer features 5th-wheel connection, sliding tandem axle, locking rollers and hydraulic lift neck. Current DOT inspection September 2023. 50% brakes and 50% tire tread remains. 26,000 GVWR. $33,495 FOB MO Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2000 Haulin 48'-70' Stretch Roll-Off Trailer • Hydraulic Lift Neck • Sliding Tandems • Roller Locks • Load Control • Headache Rack • Spring Suspension • Tires & Brakes are Fair • DOT in August 2022 $32,900 FOB WI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Like Money in the Bank.

Service you can count on!

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #98

800-382-0329 2015 JLG G10-55A Telehandler Lift

• • • • •

10,000 LB Capacity 55' Lift Height 4 Wheel Drive 3 Way Steer 72" Fork Carriage

• • • •

60" Pallet Forks Foam Filled Tires Cummins QSB 4.5 Turbo Diesel 4,350 Hours

NOW $59,900 FOB CA

Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!

www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

TRUCKS & TRAILERS

1993 Wabash 48-ft Roll-off Trailer 1993 Wabash model T-30 roll-off trailer, 48-ft long, 60% tire tread remains, 60% brakes remaining. Includes locking rollers, hydraulic lift, sliding axle, headache rack and ABS brakes. GVWR 68,000 lbs. $14,997 FOB QC Wood Tech Systems 765-751-9990 www.woodtechsystems.com

1995 JDH Trussmaster 42'-60' Stretch Roll-Off Trailer • Hydraulic Front End • Sliding Tandems • Spring Suspension • Roller Locks • Headache Rack • DOT is Current $22,900 FOB MN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

MISC

Adverti$$er

January 2024 #16294 Page #99

MISC.

New Hain Company Micro Mini Measuring System Video Here $3,499 FOB CA Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2005 Koorsen Connector Detector (For Repair or Parts) 6 detection zones to locate missing plates.

Horn & zone lights indicate missing plates.

12" to 60" adjustable height from floor. 110 Volt / 1 Phase. New control panel switches & lights in 2014. Needs circuit board repair or replacement and new tower light.

Includes 4 extra detection zone boxes. $2,500 NOW $1,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEW GALVANIZED STEEL STRAPPING 1 1/4" wide x .035 thick. $159 per coil. $2,950 per skid (21 coils). FOB PA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

AMI Industrial Floor Carts AMI's industrial floor trucks (material carts) are designed of hardwood construction, fitted with space-age phenolic, roller-bearing wheels, and ball bearing swivel casters for strength and durability. AMI's phenolic wheels resist shock without chipping. They are non-sparking, non-marking, and can be operated continuously between -50℉ and 260℉. They are unaffected by grease, oil or debris on your shop floor.

Hain 20' Powered Measuring System Adapts to Any Saw. Left or Right Hand Operation. Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers). Motor: 1/4 HP Linear Actuator (110 Volt). Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion. Stops: Jig Bored Steel. Stop Blocks: Machine Billet Aluminum. Optional Lengths from 5’ to 60’. Optional Gang Stop.

Add $890 per 10’ Section of Heavy Duty Roller Conveyor with Stands $8,990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Sweed Scrap (Band) Chopper with Stand 1/2 HP Motor (115/208-230 Volt) $1,900 NOW $1,750 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Series "B" AMI Industrial Floor Truck

EMSI Teeter Cart Width – 46” / Length – 73” / Load Capacity – 2850 pounds / Pneumatic tires – 14.5 inch / Maximum utility in truss plants, panel plants, and lumber yards / Quick Assembly by bolting parts together / All hardware is supplied / Upright 2 x 4’s not supplied / Medium duty tires rated at 1500 lbs each are included.

Call for Price Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

PHONE: 800-289-5627

Our swivel casters are precision built with perfectly aligned raceways. All cold-form parts are made to exacting tolerances from heavy-gauge steel, and are hardened for severe service and long wear. Series B-4 carts include four casters, one at each corner, to prevent "tri-cycling" of long lumber loads.

S t a n d a r d M o d e l s Av a i l a b l e Max Load Weight (lbs.)

2748 27" x 48" Series "B" & "C" 2500 3248 32" x 48" Series "B" & "C" 2500 3260 32" x 60" Series "B" & "C" 2800 3660 36" x 60" Series "B" & "C" 2800 3672 36" x 72" Series "B" 4000 4072 40" x 72" Series "B" 4000 3696 36" x 96" Series "B" 4000 4896 48" x 96" Series "B" 4000 *Other models and sizes are available on request. FOB NC. Wood Tech Systems 765-751-9990 www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com

2022 Powermatic Dual-Bag Dust Collector 2022 Powermatic Dual Bag Dust Collector.

Industrial dust collector, dual-bag, 1800 CFM with 6″ port. Includes supply of 6″ flex hose. System has 10 Cu. Ft. capacity. 3HP, 3Ph, 5 amp, 460/V with onboard starter. $5,497 FOB VA Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Used Teeter Carts Steel teeter carts, quantity of (16), for moving bulk material for production staging, can be used to deliver full units to sawyer or long cut material to an assembly area at a convenient working height. Size 72″ long x 46″ wide x 32″ high, 2,500 lb. load capacity. Feature (2) pneumatic tires/ steel wheel, and (2) swivel casters.

Units shown without large tires: quantity of (3) at $500 each.

Wood Tech Systems 765-751-9990 www.woodtechsystems.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

By Paul McEntee

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #100

Adverti$$er

Developing High-Capacity Tension Straps for Mass Timber Engineering

ass timber buildings use cross-laminated timber (CLT) or mass plywood panels to create horizontal diaphragms to transfer wind and seismic forces into the vertical elements of the lateral-force-resisting system. Spline connections resist shear forces at the panel joints, which I discussed in Mass Timber Diaphragm Options with Four Different Connection Types — How Our LDSS48 Light Diaphragm. I wanted to discuss several options for tension straps used for chord splices and collector forces. This article will not discuss methods for calculating design forces. Instead, I am going to focus on several strap products and how we developed their allowable loads.

M

Straight straps are one of the few connector products where allowable loads are based on calculations, not testing. For joist hangers, hurricane ties, or holdowns, there are all sorts of eccentricity that create shear, prying, and withdrawal forces on the fasteners and difficult-to-predict load distribution in the connector. Straight straps don’t have any of that, so we can calculate the steel tension capacity and the fastener capacity per code. However, Simpson Strong-Tie has tested many of our straps because we really love testing. We also receive questions sometimes about deflection or whether or not you can install a given strap over plywood (you can, as long as you use nails 2½” or longer).

The need for larger force capacity became apparent as Simpson Strong-Tie began entering the structural steel market. We had stretched the limits of the existing equipment when we had to figure out how to use two of the 55 kip (55,000 lb) actuators together to push and pull on a Yield-Link® Moment Frame with a 36”-deep beam. To go even bigger for subsequent test programs with larger capacities, we needed to contract with university labs. Now, with the added capabilities of our Million Pound Rig, we’ll be able to support our growing market areas in structural steel, mass timber, and concrete strengthening.

CS14 Test Setup Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #101

Adverti$$er

Nailed tension straps have allowable loads ranging from 605 pounds (HRS6) to 9,215 pounds (CMST12). In mass timber diaphragms, forces often exceed these capacities. We have seen engineers specify multiple straps or custom steel plates to achieve higher loads at splice locations. To help reduce cost and speed up installation, Simpson Strong-Tie developed the MDCST – Medium Duty Diaphragm Chord Strap Tie. The MDCST is a 14-gauge strap that uses Strong-Drive® SDS Heavy-Duty Connector screws.

MDCST48 Strap

The MDCST48 has an allowable load of 11,905 pounds and can be overlapped to achieve double the load where space is limited. North American CLT manufacturers do not glue the edges of the CLT plies together. To evaluate whether these unglued edges would affect the capacity of the SDS screws, we tested the MDCST48 on CLT. Calculations predicted the strap tensile capacity would govern the allowable load and our assembly tests validated the calculation model.

MDCST Test Setup

After releasing the MDCST, we wanted to develop a highcapacity tension strap using fewer fasteners. We combined two products to do this. The Strong-Drive SDCF Timber-CF Screw is a fully threaded screw designed for mass timber. The threads on the SDCF maximize withdrawal resistance for their original intended uses as beam reinforcement, bearing reinforcement, and splitting reinforcement. The MTW45-8 Mass Timber Angled Washer allows SDCF installation through a steel side plate at a 45-degree angle.

Traditional fasteners transfer shear load through shank bearing on the wood. Installing the fastener at an angle allows us to transfer shear loads through the fastener in tension. The high-withdrawal capacity of the SDCF creates a strong, stiff connection allowing high loads with fewer fasteners.

MDCST Test Failure Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #102

The reference allowable shear loads for the MTW45-8 installation with SDCF Timber-CF screws are based on our testing of individual or small groups of fasteners. I discussed fastener testing in So, What’s Behind a Screw’s Allowable Load? We also performed larger group testing to determine appropriate group action reduction factors. We’ve summarized the allowable loads, stiffness behavior, and design procedure in an engineering letter, L-MTW45SDCF. Engineers can use the procedure to design custom connections for plate thickness between ⅛” and ½”.

Group Action Tet Setup

While you could design a strap, picking one out of a load table is easier. The MTWS Mass Timber Washer Strap is a high-capacity strap designed for use with inclined SDCF Timber-CF screws in MTW45-8 washers. It comes in two widths and has allowable loads for three-ply and five-ply (or thicker) mass timber panels.

The article, Developing High-Capacity Tension Straps for Mass Timber Engineering, appeared first on Simpson Strong-Tie Structural Engineering Blog. To sign-up to receive the Engineering Blog in your inbox, go to seblog.strongtie.com/subscribe.

Copyright © 2023 Simpson Strong-Tie Company Inc. All Rights Reserved

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #103

Adverti$$er

MISC.

• • • •

Alpine Lumber Carousel 7 Bunk Capacity (up to 12' Lumber) Pushbutton Control Station 10 HP / 3 Phase Motor In working condition when removed in August 2023 $11,900 FOB Manitoba Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Atlas Copco Rotary Screw Air Compressor • Model GX11FF • 15 HP Rotary Screw Air Compressor (230/460 Volt - 3 Phase) • 13,443 Hours • 51.7 CFM at 128 PSI • 80 Gallon Tank • Built-in Air Dryer does not work • Includes separate 2012 Pneumatech AD-50 Air Dryer (1 Phase) $4,250 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Material Carts 36" x 62" Steel Framed Material Carts with 2 Vertical Metal Posts 6" Wheels (2 Fixed & 2 Swivel) 22 Available at $325 Each $6,500 for all Wasserman & Associates 800-382-0329 www.wasserman-associates.com

SL-Laser Model ProDirector 7 Projection System Improved model ProDirector 7, green-color laser projection system from SL-Laser.

Projects roof truss, floor truss and wall panel design images accurately onto building surface for faster setup and fabrication times. New employees are productive more quickly, with less training required. Each laser head provides 21′ projection length (at 15-foot ceiling heights). New model PD7 projector heads are smaller in size than previous models, have diodes that are easier than ever to swap out and maintain, and project an even clearer line onto the building surface.

System includes projector heads, cables, mounting hardware for attachment to customer’s structure, factory installation, training, and options for computer controls. Works with each connector plate manufacturer’s design software. Modular nature of the laser heads allows for easy future expansion of system length. 120 volt, 1 phase.

FOB NC Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Used Steel Material Carts Total quantity of (54) steel material carts feature C-channel construction, with 4 caster wheels each: 2-fixed, 2-swivel allowing for maneuvering. Quantity of each size: (21) 3’x5′, (10) 3’x5′ heavier duty, (10) 3’x6′, (8) 3’x7′, (4) 4’x4′, & (1) 4’x7′, Configuration of frame and wheel size may vary. $300 ea. FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2017 L-M Double End-Bump Rollcase Station 2017 L-M Double End-Bump Rollcase.

This unit serves an integral part of precision package cutting. The heavy duty steel fabricated main frame of the Rollcase is assembled with 10 bed rolls, machined from 5″ steel pipe. All ten (10) rolls are driven together with RC80 roller chain. Back up rolls are also mounted on the main frame to align the package squarely to the bumping surfaces. A hydraulic 40 gallon power unit delivering 20 GPM is used to power bed rollers that are driven to pound the package of lumber against a reinforced steel face, to flush up one end which either eliminates or reduces end trims. A variable speed drive allows for precision control during the bumping process. Includes 15 HP electric motor, motor starter, strainer, relief valve, return filter and all available accessories at the hydraulic unit. 230/460 volt, 3 phase electric power required. $34,997 FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.co

2021 All Lift Stand-Alone Jib Crane 2021 All Lift 3-Ton floor mounted jib crane with 18-ft span, 16-ft reach and 10′-6″ working height, with a 360° rotating boom, this heavy-duty jib crane can provide service to large areas. All Lift jib cranes feature a heavy wall structural steel pipe mast with a 78″ diameter reinforced base plate, allowing for continuous alignment and minimal deflection. The rolled steel I-beam features a tapered flange for smooth trolley travel, and safety end stops at both ends of the boom. (must be mounted on a 4′ deep cement foundation with rebar).

System includes an electric 3-Ton capacity hoist with a trolley connecting to a Panels Plus panel lift with 12′ wall height capacity.

New, this complete system costs approx. $25,000 (with “soft costs” that included freight and install, approx. $30k total). 230 volt electrical required. $19,997 FOB az Wood Tech Systems 765-751-9990 www.woodtechsystems.co

2016 5-Bay Ranger LRS, with (4) Magazines

2016 Ranger LRS designed to fit the MiTek Blade linear saw, includes (5) lumber carts,

(4) lumber magazines, overall beam length of 50-ft with end column supports, footprint of 50′ x 52′. Pick head is screw-type. Includes light-curtain perimeter beam, operator’s console, perimeter safety fencing and rails for carts.

$81,995 FOB FL

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #104

800-382-0329 2021 Triad Floor Cassette System $339,000 NOW $289,000 FOB CO

TRIAD GENERATION 3 FRAMING TABLE Lengths to 76' Powered Width Adjustment (6'-9" to 18'-3") Joist Locators at 16", 24" and 19.2" Centers Accommodates 2x8 through 2x12 Lumber, LVL, I-Joists & Open Web Floor Trusses

TRIAD TRIDENT NAIL BRIDEG WITH ROUTER Programmable Touch Screen 3 Tool Mounts with Tilt Capacity (Excludes Nail Guns) Router Mount (Excludes Router Motor) Auto Sizing Plate Fire Bridge Auto Return Accommodates Horizontal & Vertical Decking Needs replacement sensors

TRIAD STUD STITCHER WITH MATERIAL BRIDGE Programmable Touch Screen 208 Volt / 3 Phase 3 Tool Mounts on Each Side (Excludes Nail Guns) New price was $481,488 Bridge Auto Return Installation is available at additional expense 4,000 Lb Capacity Material Bridge (joists, studs or drywall) Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!

www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #105

Adverti$$er

MISC.

JobLine.com, inc.

The

Scrap Incline 20′ belt scrap conveyor with 8′ incline, 2′ wide. 240v, 30 amp power. $22,490 - FOB CA Wood Tech Systems 765-751-9990 www.woodtechsystems.com

New Handle Bar Router Porter Cable Model 7519 Production Router Motor with Soft Start. Steel Handle Bar Frame with Makita Switches. 120 Volt / 1 Phase / 15 Amp / 21,000 RPM. Includes 2 Router Bits. $3,000 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

800-289-JOBS

Generation 3, Used 2018 Triad Framing Table The Generation 3 Framing Table has adjustable 20’ long walls, with wall heights from 6’9” to 14’3”. Studs are placed between color-coded stud locators. With just a push of a button, the width adjustment clamp is activated to clamp and square all components. The Generation 3 Framer features a wider table top, designed with the framer in mind. Our new Anti-Slip Surface that allows the operator to work on a comfortable and safe surface.

Call for Price Eide Integrated Systems, LLC 612-521-9193 www.eidemachinery.com

2010 SL-Laser PD-4 Laser System 2010 SL-Laser model ProDirector-4, 4-head system includes four (4) projectors with universal mounts, two (2) PC terminals with stands and all available cables. Green laser projection. In working order when decommissioned. Replacement cards no longer available. Projectors can be used to prolong the life of an existing PD-6 projector. 120 v, 1 phase electrical required. $26,875 FOB QC Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Time To Hire?

We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com STRICTLY CONFIDENTIAL!

A

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

MODULAR EQUIPMENT

NEW! Hilman Model BSP-6P Rollers • • • •

6 Ton Capacity.

Polyurethane Wheels.

Swivel Padded Top. 54 48 Available

New Sub-Component Nailer

$290 NOW $200 each FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

• • • • • • • •

Assembles Trimmers, Jacks, L’s, Channels & Headers 2x4 and 2x6 Capacity Remote Fire & 3-Way Clamping Staggered or Straight Line Nail Pattern Squaring Stop Foot Pedal Control Reserve Air Tank 5’ Infeed & Outfeed Roller Conveyor

$25,000 FOB NE 800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #106

Adverti$$er

HSF

Hain Systems Framer

T

he Hain Systems Framer (HSF) will help you build square and accurate wall panels for residential or commercial construction applications. It will help you cut building costs by saving time and improving your quality. It’s a reliable, efficient and proven Electrical Supply: 110 VACsimple design. The HSF is based on a proven design with over 20 years of actual production system that features a ruggedly 1/4 HP, 110ItVAC, Linearfully Actuator useMotor: and maintenance experience. comes assembled and is designed for portable job site framing or in-plant permanent Highly Accurate: +/- .010 Inches installation.

The table has many optional attachments and will support Mylar Tape wall layout or any other type of layout. The Stop Rail: 2 x 4 x 1/4 Aluminum Extrusion optional gun rails can also be retro-fit to any table.

Stops: Jig Bored Steel Stop Blocks:

Internal Components: Details: Dimensions: Table Construction:

Air Supply:

Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5Structural feet (60”) to 60 feet (720”) Thick-wall Steel Tubing, Jig Welded for Accuracy Height: 12 inches 90Depth: psi (10 12 CFM Air Flow Recommended) inches

If you are looking for the fastest, mostVAC consistent way to measure and cut your product, Electrical Supply: 120

then the Hain Measuring System (MEA) is your answer. The MEA changes from one length

Powder Graythe operator’s position on the line. It t any lengthCoat: instantly, up to 60’,Industrial without changing

is also highly accurate (+/- .010) and quickly moves from one length to the next in Dimensions: Height: 43”

seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first

time user will be productive withLength: little or no16’ training required. It can adapt to any saw and

or 20’ can be mounted to any surface so that you can integrate the MEA with your existing

Width: Adjustable to 10’ or 8’ operation to 12’ and setup.

The MEA is versatile allowing “left” or 8’ “right” handed

measurement in “feet and inches” or “inches” depending on your preference. The MEA is Shipping Weight: 3000 lbs also available in a “Skid Mounted” version.

theHAINCOMPANY 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Electrical Supply: Motor: Highly Accurate: Stop Rail: Stops: Stop Blocks: Internal Components: Dimensions:

110 VAC 1/4 HP, 110 VAC, Linear Actuator +/- .010 Inches 2 x 4 x 1/4 Aluminum Extrusion Jig Bored Steel Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5 feet (60”) to 60 feet (720”) Height: 12 inches Depth: 12 inches

If you are looking for the fastest, most consistent way to measure and cut your product, then the Hain Measuring System (MEA) is your answer. The MEA changes from one length t any length instantly, up to 60’, without changing the operator’s position on the line. It is also highly accurate (+/- .010) and quickly moves from one length to the next in Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982 seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first time user will be productive with little or no training required. It can adapt to any saw and can be mounted to any surface so that you can integrate the MEA with your existing

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

January 2024 #16294 Page #107

Adverti$$er

Door } Stair } Window Machines

Equipment Wanted!

BAM “Ovation” Door Machining Center (DMC) New Builders Automation Machinery “Ovation” series, door machining center (DMC). Fully programmable, two-stage door machine featuring (27) axes of operation. Can be specified with either two or four front machining heads. Machine is side-eject, direct-drive with helical gear racks and gear protection from dust. The door loader is driven by an absolute encoder; no stepping motors, belts or exposed ball screws are used.

More information Click Here Price based on configuration Wood Tech Systems 765-751-9990 www.woodtechsystems.com

RUVO MODEL 1300 DOUBLE END DOOR TRIM SAW $4,250 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Saws

Trucks & Trailers

•

• •

• • • •

Automated Component & Linear Saws (2010 & Newer) Monet DeSauw or TimberMill Manual Component Saws Floor Web Saws Spida (Apollo) Saws with Truss Automation Bunk Cutters

Truss Equipment •

Dotul Door Stop Stitcher Click Here for details $4,900 NOW $3,600 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

• • • • • •

Roller Gantry & Hydraulic Press Systems Finish Rollers Truss Stackers Floor Truss Machines Lumber Splicers Jack Tables C-Clamp Presses

Wescana Jack Press & Table

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Modular Equipment •

Pacific Automation or MiTek Mobile Home Press

Contact Wasserman & Associates for a Fair Market Value Assessment of your Used Equipment Operational, Needs Work, and Parts Only equipment will be considered!

800-382-0329 | www.wasserman-associates.com

NEW!

35 Ton Hydraulic Press with 14" Wide Platen Press Roof or Floor Truss (4" Maximum Opening) Steel Frame Table with 1/4" Steel & 1" Plastic Top Slotted Jigging at 12" Centers | Joystick Control 7.5 HP / 3 Phase (208/230/460/575 Volt) 6' x 25' Table & 8' x 25' Table Available

Stretch Roll-Off Trailers Gooseneck Roll-Off Trailers

NEW!

BAM Door Loader, Model 2001

Builders Automation Machinery (BAM) door loader, model 2001. Allows you to stack door slabs horizontally and feeds them into a horizontal door machine like the BAM model 996E-TS. Mechanically adjusts door stack height vertically as slabs are fed into machine.

Clamp automatically adjusts to type and size of door slab: steel, solid-core or hollowcore, from 6-ft to 8-ft heights. Electronic, programmed controller manages the loading process. Loader positions the door stacks adjacent to the door machine infeed to save effort of the operator. Pneumatic motor and heavy-duty drive train provide dependable continuous use. Cycle time approximately (30) seconds per loaded door slab.

Footprint approx. 10′ x 10′ x 11′. Weight 2,000 lbs. 120 volt, 1 phase, 15 Amp electrical required. 120 PSI at 20 CFM (1/2″ ID line min.) air required.

Price Based on Configuration

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #109

NEW!

NEW!

BAM Stair Wedge Saw

Builders Automation Machinery (BAM) model 2220, stair wedge saw station automatically produces wood wedges used to lock stair treads and risers into slots cut into the stair stringers…

Price based on configuration FOB FL

765-751-9990

www.woodtechsystems.com

BAM Pre-Hung Door Machine Titan Series Builders Automation Machinery (BAM) Titan series pre-hung door machine. Designed to produce between 150 and 250 doors per day. Multi-function door machine capable of doors 1′-6″ to 4′-0″ in width, and both 6′-8″ or 8′-0″ door heights. Processes both 1 3/8″ and 1 3/4″ thick door slabs. Machines the door, hinge jamb and strike jamb all at the same time. Capable hinge sizes include 3 1/2″ x 3 1/2″, 4″ x 4″, 4 1/2″ x 4 1/2″ with 5/8″ radius. Cycle time with flush hinge routing is 45 seconds. 10′ long x 7′-6″ wide footprint. Shipping weight 4,000 lbs.

More information Click Here Price based on configuration

NEW!

765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

Builders Automation Stair Stringer Router More information here: http://goo.gl/mSsxyY 800-382-0329 | www.wasserman-associates.com

NEW! BAM Staircase Assembly Clamp Builders Automation Machinery (BAM) staircase assembly clamp, model 2210, accommodates up to 20 foot long stringers with a maximum width of 54″…

Price based on configuration FOB FL 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

The truss industry relies on 3rd party quality assurance services to provide random visits to review the plants Quality Assurance program along with their operations. If your plant needs to comply with the IRC, IBC and to those who depend on solid, experienced QA expertise, we ask you to consider selecting Timber Products Inspection, Inc. (TP) as your choice for 3rd party inspections.

Proudly serving the forest products industry for over 50 years, TP brings the expertise you need to ensure your business is successful. As a responsible partner, TP delivers to clients, employees, and the industries we serve the confidence to drive value through the effective use of our diverse professional team.

TP would like to welcome the following authorized agents to our inspection team, each of whom have many years of experience in the truss industry!

•

Al Coffman

•

Jean Hart

•

Curt Holler

•

Chuck Ray

•

Glenn Traylor

•

Elliot Wilson

If you have questions about how you can make this selection, please contact your authorized agent above or Glenn Traylor at 919-280-5905 or trusguy@gmail.com.

https://www.tpinspection.com/ https://www.tpinspection.com/auditing-services/truss

A

Th e

Component OMPONENT Manufacturing ANUFACTURING dverti$ dverti $ er dverti$er

Don’t Don’t Forget!

Forget!

You it IN inTHE the YOU Saw SAW IT

Safety First!

Safety Meeting Topics From State Fund CA.

Workplace Fires

January July 6th,2024 2012 #16294 #05149 Page PAGE#111 #27

Adverti$er dverti$ $er A Incendios en el sitio de trabajo

El peligro de un incendio está presente en cualquier sitio de trabajo.

Pero si usted está consciente de las posibles causas y condiciones y está preparado, y si piensa antes de actuar, se pueden minimizar los riesgos de incendios en su sitio de trabajo, así como sus efectos dañinos a usted, a sus compañeros de trabajo y a su empresa.

Cumplir con las prácticas de buen orden y aseo es crucial para The potential for fire is present in any workplace. But, if you’re prevenir incendios. Eso significa mantener los equipos eléctricos y aware of the causes and conditions, if you’re prepared, and if you think de calefacción limpios, en buen estado de funcionamiento y libres before you act, the risk of a workplace fire and its damaging effects – on de obstrucciones; limpiar los ductos y los filtros de las campanas de you, your co-workers or your company – can be minimized. extracción de gases; mantener las estufas y los hornos limpios y libres Following good housekeeping practices is crucial to fire prevention. de derrames de grasa, azúcar, salsas, etc.; mantener los papeles, aerosoles That means keep heating and electrical equipment clean, clear, and in y otros materiales inflamables alejados de los elementos de calefacción; good repair; regularly clean ducts and fume hood filters; keep ovens y almacenar los líquidos inflamables alejados de fuentes de calor, y de and ranges clean and free of spilled fats, sugar, sauces, etc.; keep paper las vías de salida y rutas de escape. products, aerosols, and other flammable materials away from heating Para evitar los incendios causados por elements; and store flammable liquids away la electricidad, revise, reemplace o haga que from heat sources, exits or escape routes. To un profesional repare cualquier aparato con avoid electrically-caused fires, check, replace cordones o cables deshilachados o sueltos, así or have professionally fixed any appliance como cualquier cordón o cable que se caliente with frayed or loose cords and wires or cords estando en uso.

Evite colocar los cordones that get hot during use. Avoid running cords o cables debajo de las alfombras o cerca de or wires under rugs and carpets or near a heat fuentes de calor; y manténgalos alejados de las source; and keep them out of doorways where puertas donde pueden estar sujetos a desgaste. they can become worn.

Asegúrese de que los equipos de protección Ensure that fire protection equipment (i.e., contra incendios (por ejemplo, rociadores, sprinklers, smoke/heat detectors, alarms, fire detectores de humo o calor, alarmas, mangueras hoses, fire extinguishers, and fire blankets) are para incendios, extintores de incendio y mantas maintained, available for use, and not impaired para incendio) reciban buen mantenimiento y or concealed. Make sure fire extinguishers estén disponibles para su uso, y no dañados correspond to the potential risk. Know where o inaccesibles. Asegúrese de que los tipos de they’re located and how to use them. extintores para incendio correspondan a los Besides training in fire prevention riesgos potenciales. Sepa dónde están ubicados and protection, make sure you understand company emergency y cómo usarlos. communication and evacuation procedures. Know the location of fire Además de la capacitación en la prevención y protección contra alarms and the telephone numbers for emergency response personnel. incendios, asegúrese de entender los procedimientos de evacuación y Report a fire, even if it seems minor. Fire fighters would rather arrive and de comunicaciones de emergencia de su empresa. Conozca la ubicación find nothing to do than be called after it’s too late to save individuals or de las alarmas contra incendio y los números de teléfono del personal property. Keep in mind that all workers are responsible for preventing de respuesta a emergencias.

Reporte los incendios, aunque parezcan ser fires, but not everyone is expected to fight major fires. Fire fighting is menores.

Los bomberos prefi eren acudir y encontrar que no tienen nada best handled by trained professionals. que hacer y no ser llamados después que es demasiado tarde para salvar a alguna persona o propiedad. Tenga presente que todos los trabajadores son responsables de prevenir los incendios, pero no todos tienen la Mylon Stark responsabilidad de combatir los incendios mayores. Es mejor dejar el combate contra los incendios a los profesionales capacitados para hacerlo.

605.838.4240 fax 888.519.4130 toll-free 605.220.2342 mobile info@bigpicturesafety.com http://www.bigpicturesafety.com The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627 PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

Calendar of Events

January 2024 #16294 Page #112

JANUARY 2024 January 17 – February 1

University of Minnesota Annual Institute for Building Officials

Brooklyn Center, MN

January 18

Truss Manufacturers Assoc. of Texas (TMAT) Training Session for TxDOT

Austin, TX

January 19

Colorado Truss Manufacturers Assoc. (CTMA) Chapter Meeting and Topgolf

Centennial, CO

January 25

SBCA of the Capital Area Chapter Business Meeting

Herndon, VA

FEBRUARY 2024 February 2 – 4

True Value Spring Reunion 2024

New Orleans, LA

February 6 – 7

BLD Connection – BizCon North 2024

Bloomington, MN

February 7 – 8

Building Material Suppliers Assoc. (BMSA) Annual Learning Exchange & LBM Expo

Hickory, NC

February 14 – 16

United Hardware 2024 Spring Buying Market

St. Cloud, MN

February 20 – 22

LBM Advantage 2024 Annual Buying Show

Orlando, FL

February 21 – 22

BLD Connection – BizCon South 2024

Altoona, IA

February 22 – 24

Orgill 2024 Spring Dealer Market

Orlando, FL

February 26 – March 1

EduCode 2024 Conference & Exhibition

Las Vegas, NV

February 26 – 28

University of Texas Building Professional Institute (BPI) of Texas—Houston

Houston, TX

February 27 – 29

National Association of Home Builders (NAHB) International Builders Show (IBS) 2024

Las Vegas, NV

MARCH 2024 March 1 – 2

International Housing Assoc. (IHA) Annual Meeting

Las Vegas, NV

March 5 – 7

Lumbermens Merchandising Corp (LMC) Annual

Houston, TX

March 6 – 8

National Frame Building Assoc. (NFBA) 56th Annual Frame Building Expo

Des Moines, IA

March 10 – 12

North American Wholesale Lumber Assoc. (NAWLA) Leadership Summit

Tucson, AZ

March 12 – 14

Ace Hardware Spring Convention

Dallas, TX

March 13

IDEAS Lumber and Building Material Trade Show

King of Prussia, PA

March 18 – 20

Modular Building Institute (MBI) 2024 World of Modular

Orlando, FL

March 18 – 20

National Institute of Building Sciences (NIST) Building Enclosure Science and Technology Conference (BEST6)

Austin, TX

March 19 – 21

Atlantic Builders Convention (ABC) Conference & Expo

Atlantic City, NJ

March 19 – 21

Lean Summit 2024

Carlsbad, CA

March 19 – 22

AGC—The Construction Association Annual Convention

San Diego, CA

March 20 – 22

AGC—The Construction Association Contractors Solutions Expo

San Diego, CA

March 20 – 22

Southeastern Lumber Manufacturers Assoc. (SLMA) and Southern Forest Products Assoc. SFPA) Spring Meeting & Expo

New Orleans, LA

March 21

BLD Connection – 2024 Wisconsin Connection Conference

Baraboo, WI

March 21 – 23

JLC LIVE New England Residential Construction Show

Providence, RI

March 23 – 25

Do it Best Spring Market 2024

Houston, TX

March 24 – 27

Build24: AWCI’s Convention + Expo

Lake Buena Vista, FL

March 26 – 28

International Mass Timber Conference

Portland, OR

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

Calendar of Events

January 2024 #16294 Page #113

March 26 – 28

National Hardware Show

Las Vegas, NV

March 26 – 28

Structural Building Components Assoc. (SBCA) and National Framers Council (NFC) Open Quarterly Meetings

Fort Worth, TX

APRIL 2024 April 17 – 19

MSR Lumber Producers Council (MSRLPC) Annual Workshop

Charlotte, NC

April 23 – 25

American Building Materials Alliance (ABMA) 2nd Annual Advocacy Day

Washington, D.C.

April 28 – May 1

LBM Advantage 2024 NextGen Leadership Conference

Denver, CO

MAY 2024 May 6 – 9

University of Texas Building Professional Institute (BPI) of Texas—North Texas

Irving, TX

May 14 – 16

Structural Building Components Assoc. (SBCA) and National Framers Council (NFC) Open Quarterly Meetings

Ashville, NC

May 14 – 16

Virginia Tech Short Course: Structural Design Topics in Wood Construction

Blacksburg, VA

JULY 2024 Structural Building Components Assoc. (SBCA) and National Framers Council (NFC) Open Quarterly Meetings

July 9 – 11

Bellevue, WA

OCTOBER 2024 October 7 – 11

Building Component Manufacturers Conference and Framer Summit (BCMC | FS) Milwaukee, WI

Don’t see your event? Increase attendance and participation by listing your industry focused events here!

E-mail details and event web-link to Anna@componentadvertiser.org. We can’t guarantee space for all events, but all industry related events will be added on a space available and interest to our reader priority.

FROM PAPER TO PRODUCTIVITY, WE MAKE GETTING STARTED SIMPLE

FACTORY-IN-A-BOX The 4Ward Factory-In-A-Box solution takes your idea from paper, to production. Our solution is flexible & customizable to correspond with your business plan, the end result is structured & repeatable.

GET YOUR BUSINESS MOVING FORWARD. BOOK YOUR CONSULT TODAY. INFO@4WARDSOLUTIONSGROUP.COM BUSINESS PLANNING • FUND RAISING LAND ACQUISITION • FACILITY LAYOUT AND DESIGN FACILITY CONSTRUCTION • FACILITY SETUP TEMPORARY STAFFING RECRUITMENT & TRAINING

PRODUCTION STARTUP • BEST PRACTICES AND SOP ESTABLISHMENT & TRAINING • MATERIAL SOURCING PRODUCT TO MARKET • AND MORE

4WARDSOLUTIONSGROUP.COM PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

MAKE WALL PANELS EASY

The easiest way to speed up wall panel production, on-site or off-site.

With the cleanest, clearest layout markings in the Industry, and proprietary software keeping track of your projects, make wall panels easy with EasyFrame.

FIND OUT MORE AT EASYFRAMESAW.COM

The

JobLine

.com

Since 1992

Careers in the Truss, Wall Panel

and Engineered Wood Components Industry

Job Opportunities Available Candidates Services & Products

800-289-5627 www.thejobline.com

JobLine.com, inc.

800-289-JOBS

The

www.thejobline.com

January 2024 #16294 Page #116

job opportunities available

The

JobLine.com Full Time 32hrs 4x10 or Flexible

With Full Benefits!

Are you a skilled Truss Designer or Wall Panel designer seeking a better work-life balance? Look no further! Our client is offering a unique opportunity for talented designers like you to thrive in an environment that respects your personal and professional needs.

In this position, you'll have the flexibility to choose from various working arrangements to accommodate your lifestyle. Some of our employers offer a 32-hour workweek with full benefits, allowing you to strike a perfect balance between your career and personal life. You can work in the office, remotely, or in a hybrid setup, depending on your location and skill level.

Remote Truss Designer J14203 Indiana

CFS Truss Designer J15269 Remote or in the Midwest

Truss Designer J14136 South

Remote Wall Panel Designer - J15304 Remote - Eastern US

Truss Designer J11629 MO

Remote Truss Designer - MiTek J15303 Florida or remote

Truss Designer - 32 hour week* J15310 Remote

Remote Truss Designer - MegaMultifamily J15302 Central time zone

LGS/CFS Estimator J14141 TN CFS Truss Designer | Wall Panel Designer J15323 Midwest

Hybrid Remote Truss Designer - Single Family J14212 Remote or in office (IN)

Outside Sales - Wall Panels, EWP & Trusses Eastern Ontario

Senior Mega-Multifamily Designer J15301 Northern California

EWP Designer-J15283 Eastern Ontario

Remote Truss Designer - MiTek J15228 Florida

More Details Here

Senior Truss & EWP Designer - J15320 AB, BC, ON

Residential Order Tech J15232 South

See what we can do for YOU!

Remote Senior Truss Designer - Truss J15266 South

Truss Designer J15250 South

Truss Plant Operations Manager J15318 Florida

Truss Designer J15251 South

Assistant Truss Plant Manager J15311 Central Florida

Truss Designer J15286 Indiana

JobLine.com

Production Manager/Inside Sales J15316 Southern Ontario

Truss Designer J15290 Ohio or Hybrid Remote

Senior Truss Designer - J15315 Southern Ontario

Remote Wall Panel Designer - Production Builder Market J14107 Remote Indiana

ATTENTION!

EWP Designer - J15314 BC

visit: www.thejobline.com email: mail@thejobline.com

STRICTLY CONFIDENTIAL! The

We are in the process of rebuilding all of our job orders to better fit our new website. For an Up-ToDate list of available jobs, please visit our website

www.thejobline.com See what we can do for YOU! visit: www.thejobline.com email: mail@thejobline.com

STRICTLY CONFIDENTIAL! PHONE: 800-289-5627

Truss Designer J14165 Carolinas

Remote Truss Designer J15313 New England Truss Designer J15285 New England Truss Designer J14164 Florida Truss Designer - MiTek - Remote or OS J15312 Florida or Remote (Central or Eastern Time Zone Candidates) Remote MultiFamily Truss Designer Wall Panel Designer J5309 Central Timezone

Get Current Job Opportunities Here

Outside Sales - Multifamily Turn Key Framing J15308 Houston Remote Truss Designer J15307 Full Time Remote Implementation and Support Specialist J15306 100% Remote - Northeast

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

JobLine.com, inc.

The

ID: C11370 General | Plant Manager/Operations Truss/Panel/Framing Package Relocation: Texas, Arizona 20 years' experience.

Started in production, advanced to Saw Supervisor, Production Manager, Plant Manager, now General Manager. As General Manager operated a $125M truss plant. Tripled output and reduced errors and labor cost.

Developed and implemented standards and procedures to manage quality and costs.

As Plant Manager (4 years), manage all the operation of the manufacturing plant, such as Productivity, logistics, efficiencies, costs. As Production Manager (12 years), manage all the areas of the manufacturing across the plant. Safety, quality control, efficiencies, HR, etc... Software: MiTek, Word, Excel, OptiFrame. Products: R & F Truss, Panel, Framing package.

Markets: Single Family, Multifamily, Custom Homes. Bilingual English/Spanish spoken and written. Degree in Industrial Engineering.

Compensation: $90's+ bonus ($100k min) ID: C13437 Remote Truss Designer | In Office Truss Designer | Design Manager Relocation: Ohio If it is big, bad, ugly, or worse, I can handle it. I've done layout and profile work in autocad w/ some home brewed scripting, and ArchiCAD. Custom residential, a few track builders that had 3 base models and many options to track, some multi-family, and large commercial projects. Software: MiTek, AutoCAD, ArchiCAD, Truswal, Simpson, Eagle and others. Quick to pick up new software.

ID: C10853 Remote Design Manager | Remote Offshore Design Project Manager Relocation: Texas, Georgia, USA - South Top level Engineering/Design Management candidate, 14+- years experience Truss, 4+- Panel experience. Has experience building and integrating offshore design resources with internal design departments and training design managers to better utilize offshore capabilities. Large volume manufacturer experience. MiTek Sapphire design/layout proficient. Too confidential to go into more detail.

Compensation: $120k+ ID: C18565 Designer: Truss/Panel, Wood/Steel, BIM Relocation: North Carolina Material take-offs, proposals, job-site meetings, Submittal Tracking, Excellent Problem-solving Skills, Material Ordering, Field Measuring, 3-D Modeling Program (3-D and 4-D BIM in-house), Generated PHONE: 800-289-5627

800-289-JOBS

January 2024 #16294 Page #117

www.thejobline.com

Available Candidates material take-offs from the BIM model, Coordinated RFI's thru the BIM model, Clash detection between wood trusses, structural steel and LVL's. 3-D Scan's of job-sites. Scheduled / Distributed work to 6 designers Cross-trained all designers in roof floor and wall panels for whole-house design.

ID: C18370 Plant | Location | General Manager - Truss/ Panel Relocation: California, Nevada Highly experienced (20+ years) roof and floor truss, and wall panel manufacturing manager. Started in the plant as builder, then sawyer, supervisor, truck driver, maintenance manager, designer, outside sales, plant manager, operations manager, and general manager. OSHA trained, developed and implemented safety programs.

Successful turn around experience, hands on ability to work with departments to combine individual strengths into one team effort, lower costs, and meet quality and volume expectations.

Past experience negotiating better vendor programs to lower costs and improve inventory turns.

ID: C10507 Senior Management - Truss/Panel/Lumber/ Installed Services Relocation: USA - Western I am a Diverse driven individual seeking a position in the fast paced construction component industry where my professionalism in sales, business and leadership skills along with a strong proven background in, General Management, Operations, Sales Management, strategic alliances, business development, team building, P&L experience and Customer Satisfaction will play an integral part in growing new business, nurturing existing business or developing company operations to meet the highest level of efficiencies, standards and safety while having fun doing it!

ID: C11929 Location/General Manager - Truss/I-Joist/ Beams/EWP Relocation: USA - ALL States Schedule all production. Schedule all deliveries. Purchasing. Set company pricing. Invoicing. Receiving. Developed a system for outside sales staff to turn in truss orders. Designer. Primary duties: design, layout, and cutting/production documents.

Secondary duties: checking others work, scheduling, customer service, inside sales, and training. Software used: Non-MiTek, AutoCAD, and CAD - Other. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware.

Market experience includes tract, single family, single family custom, multi-family, light commercial, and agriculture. My

JobLine.com, inc.

The volume is $150k+- a month. Designed 1.25 million in 2012 for production. This total doesn't include quotes and is considerably less than my capability considering all other job duties.

800-289-JOBS

ID: C18454 Remote Designer | Mega-Multifamily | Single Family Custom Relocation: Minnesota 12 Years' experience. Create Estimating models for bids. Study blueprints for inconsistencies, collaborate with Design Manager and Sales to determine if more information is needed, design and engineer trusses, create a detailed truss layout to set trusses in the field, and provide support until project is successfully completed.

Mega-Multifamily, Multifamily, Single Family Custom. MiTek Sapphire and CAD. Tested low end of Senior Designer range.

ID: C11834 General/Regional Manager - Truss/Panel Relocation: Maine, Massachusetts, New Hampshire, Ontario, Vermont As District Manager: Responsible for the financial performance of three wood truss and wall panel plants, two Millwork and door assembly facilities and one installed labor location in multiple states. Group revenues increased from $50 million/year in to $70 million per year. Devised a “buy versus make” purchasing protocol in to ensure that internal truss and Millwork plants were operating at capacity before using outside vendors that supplied similar products. Spearheaded a “hub and spoke” organizational structure for three truss plants. This plan optimized scarce design talent, reduced clerical expenses, and synchronized output at each plant.

Restructured the installed labor division to include material estimators, lumber salespeople and cost accounting methods in 2005. The changes resulted in a 400k gain in profits. Drafted corporate training material for fall protection and new hire safety orientation.

As General Manager: Won “Gold Store” award for exceeding company goals in profits, sales growth, and ROA. Served on a corporate manufacturing audit and operating performance team that made recommendations to under performing truss plants. Two of the facilities audited became “Gold Stores” the following year.

When the sales of three district stores were allocated to the truss plant, the lost business ($1.5 million/year) was made up and organic sales grew by over 10%. Sales volume grew from $11 million per year to over $15 million per year.

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! Available Candidates Relocation: Alberta, British Columbia, Ontario 8 Years' experience as a wall panel designer. Uses HSB CAD, AutoCAD, Autodesk Revit. Everything from Single family custom to multifamily and modular.

ID: C18468 Truss Designer | Wall Panel Designer Relocation: Arizona, California, Nevada, Utah Designer, truss and wall panel, MiTek, AutoCAD, iLevel, almost considered a senior designer. In addition to design, was responsible for training new designers.

Also has iLevel, Open Joist 2000 experience. Wall panel design experience is in AutoCAD and later in Sapphire.

Started in the industry in sales, then wall panel design, added truss, and I-Joist. 7 years' experience in truss design, 3 in wall panel, 10 in I-Joist design. Will consider relocation to indicated areas only. Will consider remote. $26-28 hr.

Current Candidates www.thejobline.com

ID: C18459 Remote Wall Panel Designer | Wall Panel Designer

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #118

Simpson Strong-Tie Adds Steel Concealed Beam Hanger for Mass Timber Applications in Seismic Regions December 18, 2023, Pleasanton, Calif. — Simpson Strong-Tie, the leader in engineered structural connectors and building solutions, continues to grow its lineup of mass timber hardware with the addition of the SCBH™ steel concealed beam hanger suitable for high-drift, high-capacity seismic applications. The new beam hanger provides a concealed connection to preserve a wood-only look while offering an allowable design load of approximately 20 kips (equivalent to 20,000 pounds of force) and a one- or two-hour fire resistance rating per ASTM E119 for a wood-to-wood connection.

The new steel beam hanger matches the beam-to-column load of the company’s ACBH™ aluminum concealed beam hanger, while increasing the ability to deform when subjected to joint rotation due to seismic forces and inter-story drift. This combination makes the SCBH ideal for use at glulam beam-tocolumn connections in high-seismic regions.

“As mass timber construction continues to gain traction around the US and Canada, architects and engineers need more connection solutions that meet the unique requirements of earthquake-prone areas,” said Michael Weinert, senior product manager for Mass Timber and Offsite Construction at Simpson Strong-Tie. “The new SCBH steel concealed beam hanger offers immense versatility for these applications by satisfying the combined needs of aesthetics, strength and fire-rated performance alongside compatibility with seismic deformation.”

The SCBH installs easily in the factory using Simpson Strong-Tie’s fully threaded Strong-Drive® SDCF TimberCF structural screws. A generous onsite fit-up tolerance provides for smooth and easy beam installation.

Double connectors can be used on a single beam end for increased connection capacity, and a weldable SCBH-W backplate option is available for glulam-beam-to-steel support connections.

About Simpson Strong-Tie Company Inc. Simpson Strong-Tie is the world leader in structural solutions — products and technology that help people design and build safer, stronger homes, buildings, and communities. As a pioneer in the building industry, we have an unmatched passion for problem solving through skillful engineering and thoughtful innovation. Our structural systems research and rigorous testing enable us to design code-listed, value-engineered solutions for a multitude of applications in wood, steel, and concrete structures. Our dedication to pursuing ever-better construction products and technology and to surrounding our customers with exceptional service and support has been core to our mission since 1956.

For more information, visit www.strongtie.com and follow us on Facebook, Twitter, YouTube and LinkedIn.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #119

A-1 Global Holdings Announces the Appointment of Cindy Aptheker to Director of Human Resources December 14, 2023—FORT PIERCE, Fla., A-1 Global Holdings, Inc., a leading manufacturer of preengineered building components, is excited to announce the appointment of Cindy Aptheker, Esq., SHRM-CP, as the Director of Human Resources. Cindy brings over 17 years of extensive experience in human resources within the construction industry and a strong background in risk management, safety, and legal aspects.

In her new role, Cindy will report to the Vice President of Human Resources and oversee the operations of the Human Resources Department, focusing on strategic HR planning, employee relations, and organizational development to support A-1’s growing workforce. Her appointment is vital to A-1’s commitment to fostering a positive and dynamic workplace culture.

“Cindy’s impressive background in HR and her legal expertise make her an invaluable asset to our leadership team, especially during a time of significant growth and development at A-1,” said Jan Beck, A-1’s President. “We are confident that her innovative approach to human resources will greatly benefit our employees and help propel A-1 towards achieving our strategic goals.”

Cindy holds a law degree and is a certified professional in human resources. Her career includes a significant tenure at The Donaldson Organization, where she served as Executive Counsel/Human Resources. Her expertise in legal compliance, employee engagement, and strategic HR initiatives has been recognized in the industry.

A-1 Global Holdings Announces the Appointment of Nicolas Lopez as Procurement Manager December 21, 2023—FORT PIERCE, Fla., A-1 Global Holdings, Inc., a leading manufacturer of pre-engineered building components, is pleased to announce the appointment of Nicolas Lopez as the new Procurement Manager. Nicolas brings over 12 years of extensive experience in procurement and supply chain management within the Construction industry and High-Speed Railway manufacturing/ Maintenance, along with a strong background in Contract Management, Project Management, Business Process Development, and Continuous improvement.

In his role, Nicolas will report directly to Robert Jardim, Vice-President of Finance, overseeing the Procurement Department’s operations. His focus will be on strategic procurement planning, supplier relationship management, and cost-effective sourcing to support A-1’s operational efficiency. His appointment is key to A-1’s commitment to enhancing supply chain processes and overall business performance.

“Nicolas’s comprehensive experience in procurement, strategic thinking, and leadership skills make him an exceptional addition to our team,” said Robert Jardim, Vice-President of Finance at A-1. “His expertise will be pivotal in advancing our procurement strategies, particularly during this significant growth and development period at A-1.”

Nicolas previously held the position of Director of Procurement & Supply Chain at Talgo. His expertise in supply chain strategies, global sourcing, and contract negotiation has been widely recognized in the industry.

About A-1 Global Holdings Founded in 1977, A-1 has over 440 employees and is a leading manufacturer of pre-engineered wood trusses and EZWALL® Innovative Framing SolutionTM. The Company reorganized last December as A-1 Global Holdings, Inc., the new parent company for A-1 Industries of Florida, Inc., and A-1 Industries of Georgia, LLC. A-1 currently has manufacturing facilities in Fort Pierce, Fla., and Bainbridge, Ga., and multiple employment opportunities in both locations for candidates who share the Company’s Core Values – Own it, Passionate, Honesty, and Respect. A-1’s employees are eligible to participate in the Company’s Employee Stock Ownership Plan.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #120

Single-Family Starts Surge on Falling Interest Rates Posted December 19, 2023 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission.

Single-family construction surged in November as lower mortgage rates helped to assuage affordability concerns and unleash pent-up demand for housing.

Overall housing starts increased 14.8% in November to a seasonally adjusted annual rate of 1.56 million units, according to a report from the U.S. Department of Housing and Urban Development and the U.S. Census Bureau.

The November reading of 1.56 million starts is the number of housing units builders would begin if development kept this pace for the next 12 months. Within this overall number, single-family starts increased 18% to a 1.14 million seasonally adjusted annual rate. However, single-family starts are down 7.2% year-to-date. The multifamily sector, which includes apartment buildings and condos, increased 6.9% to an annualized 417,000 pace.

“Lower interest rates and a lack of resale inventory helped to provide a strong boost for new home construction in November,” said Alicia Huey, chairman of the National Association of Home Builders (NAHB) and a custom home builder and developer from Birmingham, Ala. “And while these higher starts numbers are consistent with our latest builder survey, which shows a rise in builder sentiment and future sales expectations, home builders continue to contend with elevated construction and regulatory costs.”

“The single-family starts figure is remarkably strong, and we would not be surprised to see this figure revised lower or fall back slightly in the next month, given the nearly 20% rise in November,” said NAHB Chief Economist Robert Dietz. “NAHB is forecasting an approximate 4% gain for single-family starts in 2024, as mortgage rates settle lower, economic growth slows and inflation moves lower.”

On a regional and year-to-date basis, combined single-family and multifamily starts are 16.7% lower in the Northeast, 12.3% lower in the Midwest, 6.2% lower in the South and 14.3% lower in the West.

Overall permits decreased 2.5% to a 1.46 million unit annualized rate in November. Single-family permits increased 0.7% to a 976,000 unit rate. However, single-family permits are down 8.4% year-to-date. Multifamily permits decreased 8.5% to an annualized 484,000 pace.

Looking at regional permit data on a year-to-date basis, permits are 19.9% lower in the Northeast, 15.3% lower in the Midwest, 10.3% lower in the South and 12.8% lower in the West.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #121

Slower Growth Ahead as Impact of Higher Interest Rates Lingers in 2024 Posted December 20, 2023 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission.

The recent strong economic growth rate of 4.9% in the third quarter, driven largely by consumer spending, is not sustainable, according to NAHB Chief Economist Robert Dietz. It will be difficult for consumers to maintain the same level of spending with credit card rates at around 25%. For that and other reasons, Dietz sees the U.S. economy slowing down to a growth rate of roughly 1% over the next two years.

Dietz spoke Dec. 12 during a webinar on the macro outlook for 2024. He was joined

by Pro Builder Editorial Director Rich Binsacca for a status check on key macro issues affecting the economy and the housing industry. A replay of the 70-minute webinar is available on Pro Builder’s website. Also available is a PDF summary of takeaways from the webinar.

“Call it a ‘soft landing,’ call it a ‘rolling recession.’ We just had a period where the third quarter overperformed and now the lingering effects of higher interest rates are going to slow the economy moving forward,” Dietz said.

A potential headwind against future growth is government spending. “Right now we’re spending 2.5% of total GDP on interest rates on the federal debt and that number is going to rise to 5% in the coming years. Moving from 2.5% to 5% is the equivalent of adding the entire defense budget just to pay interest on the debt,” Dietz said.

“That is a huge problem,” he added. “But in the short term, this economy is proving more robust than I think many of us expected a year ago.”

Dietz noted that one of the first signs that inflation was about to rear its head occurred in 2021, when productivity and workers’ wages began to diverge. Earnings started outpacing productivity, while the goods and services produced in the U.S. economy were not increasing. That divergence was the biggest clue two years ago that the U.S. was moving into an inflationary environment.

Looking at the remodeling sector, Dietz noted that it is flat right now, but he anticipates growth going forward. The optimism rests in the anticipated growth for aging-in-place remodeling, the fact that people are moving less frequently and working from home more, and the need for investment in the nation’s aging housing stock.

Moreover, the remodeling market is growing in terms of overall market share, Dietz said. The sector’s share of total residential construction has grown from a third in 2007 to almost 40% today.

The webinar covered a wide range of economic issues, including inflation and interest rate expectations, building materials prices, workforce concerns, demographics and the cost of regulation. Dietz concluded with a look at the medium-term outlook for residential construction and a rough glance at 2030 and beyond.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #122

New Home Sales Down in November but Should Improve Moving Forward Posted December 22, 2023 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission.

Elevated mortgage rates acted as a drag on new home sales in November, but with the peak rate cycle apparently in the rear-view mirror, sales are expected to rise as we move into the new year.

Sales of newly built, single-family homes in November fell 12.2% to a 590,000 seasonally adjusted annual rate, according to newly released data by the U.S. Department of Housing and Urban Development and the U.S. Census Bureau. The pace of new home sales in November was the lowest annual rate since November 2022 but sales are up 3.9% on a year-to-date basis due to a lack of resale inventory.

“New home sales activity should improve in the months ahead as mortgage interest rates settle in below a 7% rate,” said Alicia Huey, chairman of the National Association of Home Builders (NAHB) and a custom home builder from Birmingham, Ala. “Our latest builder survey turned positive in December, with builders indicating they expect a rise in future sales.”

“New home sales were weaker in November as mortgage interest rates likely reached a cycle peak at a 7.79% per Freddie Mac at the end of October,” said NAHB Chief Economist Robert Dietz. “Mortgage rates have since moved lower, with Freddie Mac reporting a 30-year fixed-rate of 6.67% this past week.”

A new home sale occurs when a sales contract is signed or a deposit is accepted. The home can be in any stage of construction: not yet started, under construction or completed. In addition to adjusting for seasonal effects, the November reading of 590,000 units is the number of homes that would sell if this pace continued for the next 12 months.

New single-family home inventory in November jumped to the highest level since November 2022, rising 16.5% from the previous month to 451,000. This represents a 9.2 months’ supply at the current building pace. A measure near a 6 months’ supply is considered balanced. However, the market currently requires a higher level of new construction inventory due to a persistent lack of resale inventory. Newly built homes available for sale accounted for 31% of total homes available for sale in November, compared to an approximate 12% historical average.

The median new home sale price in November was $434,700, up 4.8% from October, and down 5.9% compared to a year ago.

Regionally, on a year-to-date basis, new home sales are up in all four regions: up 4.9% in the Northeast, 3.6% in the Midwest and 4.4% in the South and 2.6% in the West.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #123

Fed Pivots and Housing Starts Surge

Posted December 22, 2023 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission.

NAHB Chief Economist Robert Dietz recently provided the following economic overview in his bi-weekly newsletter Eye on the Economy.

Interest rates have pulled back in recent weeks, as markets correctly anticipated a dovish Federal Reserve announcement in December. In fact, the Fed surprised by not only remaining on pause with respect to the federal funds rate (which was last increased in July), but also by revealing an estimated three rate cuts for 2024. NAHB is currently forecasting just two rate cuts in 2024: one 25 basis-point cut in the third quarter and one more in the fourth quarter.

Long-term interest rates responded positively to these developments. The 10-year Treasury bond has approached a 3.9% rate, down just about 100 basis points from October high levels. And mortgage rates have retreated below 7% for the first time since the middle of August. Inflation appears to be moving in the right direction as well, with the CPI growing at a 3.1% rate in November. However, policy makers should take note: Shelter cost growth accounted for 70% of the headline gain in November. Only additional construction of attainable, affordable housing will ultimately tame shelter inflation.

With the growing wave of good macro news, builder sentiment has turned the corner. While still gloomier than actual market conditions, the NAHB/Wells Fargo Housing Market Index increased three points in December to a level of 37.

We expect continued improvement ahead. However, the index’s partial and, we believe, temporary disconnect from starts/permit activity is indicating that supply-side constraints continue to frustrate the market, and that larger builders are gaining market share over more capital-constrained private builders.

In contrast, single-family starts surged in November as rates moved lower. Single-family starts increased 18% to a 1.14 million seasonally adjusted annual rate. However, single-family starts are down 7.2% year to date. The multifamily sector, which includes apartment buildings and condos, increased 6.9% to an annualized 417,000 pace.

Lower interest rates and a lack of resale inventory helped to provide a strong boost for new home construction in November.

However, it would not be surprising to see these construction data retreat in December because of last month’s accelerated pace and ongoing supply-side concerns (or the November data to be revised lower).

Nonetheless, the macro and housing data suggest next year will see gains for single-family construction, while a rise in the level of new multifamily rental completions will continue to hold back multifamily construction activity.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #124

84 Lumber Opens Newest Component Plant Outside of Atlanta

EIGHTY FOUR, Pa. (Dec. 4, 2023) – 84 Lumber, the nation’s largest privately held supplier of building materials, is pleased to announce the opening of its latest facility in Cartersville, Georgia as part of the company’s ongoing expansion plans.

The new truss plant, scheduled to open by late December, is located on an 18-acre plot at 91 Riverside Drive, Cartersville, Georgia. It will service and support the busy, dynamic Atlanta market. This truss plant will also work in tandem with the existing plant in Oxford, Georgia, bringing component manufacturing capabilities to more customers.

“With thousands in annual housing starts in the past decade alone, Atlanta is one of the fastest-growing markets, which is why we decided to expand our footprint here,” said 84 Lumber Vice President of Installed Sales and Manufacturing Ken Kucera. “84 Lumber has made it a priority to invest time and resources in this growing market.”

Cartersville, Georgia truss plant

The company has been servicing the Atlanta market since the early 1970s and greatly expanded its footprint during the 2000s housing boom. 84 Lumber later opened an additional lumberyard, as well as a dedicated window shop to keep up with market demand.

In addition to this new truss plant, 84 Lumber recently opened a new door shop in Denver, Colorado, and expanding in the state of California. 84 Lumber is also opening component plants in Winter Haven, Florida; Columbia, South Carolina; and Boise, Idaho.

About 84 Lumber Founded in 1956 and headquartered in Eighty Four, Pennsylvania, 84 Lumber Co. is the nation’s largest privately held supplier of building materials, manufactured components and industry-leading services for single and multifamily residences and commercial buildings. The company operates 310 facilities which include stores, component manufacturing plants, custom door shops and engineered wood product centers in 33 states. 84 Lumber also offers turnkey installation services for a variety of products, including framing, insulation, siding, windows, roofing, decking and drywall. A certified national women’s business enterprise owned by Maggie Hardy, 84 Lumber was named one of America’s Largest Private Companies by Forbes and also made the Inc. 5000 list of America’s Fastest-Growing Companies in 2023. For more information, visit 84lumber.com or join us at Facebook, Instagram or LinkedIn.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #125

84 Lumber Opening First Truss Plant in the State of South Carolina Building materials supplier continues expansion in Columbia as they close out 2023

EIGHTY FOUR, Pa. (Dec.12, 2023) – 84 Lumber, the nation’s largest privately held building materials supplier, is proud to announce the opening of its first truss plant in the state of South Carolina, just outside of Columbia. The plant is tentatively set to open in January 2024.

The new truss plant, located at 185 West Jones Lane, Lugoff, South Carolina, will provide trusses and wall panels, ultimately allowing more materials and services for customers. The facility will also be equipped with brandnew, state-of-the-art equipment for operation. Once open and operating, the 78,624-square-foot facility will employ roughly 90 associates when fully staffed.

Lugoff, South Carolina truss plant “We are very excited to open our first truss plant in the state of South Carolina,” said Ken Kucera, vice president of installed sales and manufacturing at 84 Lumber. “This is a prime location for us, being in the center of the state, as it enables us to supply to multiple locations in the Carolinas and parts of Georgia. We are confident we will see great success upon the opening of this plant.”

The company has been supplying local builders and contractors in the area with building materials since 1991. In 2007, the yard was relocated to the current Lexington location on East Main Street. In 2022, the store’s door production team was relocated to a standalone facility in Columbia, allowing the team to exclusively focus on door sales and production. In the decades since the original opening, the market and store have grown to become one of the most promising opportunities for 84 Lumber and its customers.

To learn more, visit www.84Lumber.com or follow 84 Lumber on Facebook, Instagram or LinkedIn. About 84 Lumber Founded in 1956 and headquartered in Eighty Four, Pennsylvania, 84 Lumber Co. is the nation’s largest privately held supplier of building materials, manufactured components and industry-leading services for single and multifamily residences and commercial buildings. The company operates 310 facilities which include stores, component manufacturing plants, custom door shops and engineered wood product centers in 33 states. 84 Lumber also offers turnkey installation services for a variety of products, including framing, insulation, siding, windows, roofing, decking and drywall. A certified national women’s business enterprise owned by Maggie Hardy, 84 Lumber was named one of America’s Largest Private Companies by Forbes and also made the Inc. 5000 list of America’s Fastest-Growing Companies in 2023. For more information, visit 84lumber.com or join us at Facebook, Instagram or LinkedIn.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2024 #16294 Page #126

The SLB Generated 498 MM BF of Incremental Demand in Q3 2023 December 27, 2023—The SLB recently published its Q3 2023 Report, highlighting how the SLB and its funded programs continued to advance the industry’s goal of stimulating demand and expanding softwood lumber markets. Last quarter, SLB-funded programs and initiatives helped achieve significant gains in the market and maximize the impact of the SLB’s investments.

Key highlights include: •

498 MM BF of incremental demand generated, which has a carbon benefit of 1.2 MM metric tons of CO2 stored and avoided.

•

Five winners of this year’s Mass Timber Competition were announced in October, with $2.2M awarded.

The initiative, funded jointly by the SLB and USDA Forest Service, showcases larger-scale uses of mass timber and a commitment to prioritizing domestically sourced wood from sustainably managed forests.

•

The SLB Education initiative continues to scale up its AEC faculty training program to get more AEC students learning about wood design and construction. A total of 52 faculty from 42 architecture and engineering programs across the United States participated in the SLB-funded workshops in 2023, during which instructors learned how to better integrate education about wood systems into their own academic programs.

•

The American Wood Council is better positioning the industry for a defense of wood in wildland-urban interface zones as fire performance and building codes emerge as priority issues.

•

Think Wood is the top online resource for mass timber, reaching the number one spot for Google search results for “Mass Timber” in the United States as of the end of Q3. Enhancing Think Wood’s search performance is an important and efficient way to support specification of wood in the design community.

•

WoodWorks directly influenced 122 projects and indirectly influenced 442 projects in Q3. Combined, the projects represent 20.9 MM SF of impacted wood construction, 190 MM BF of incremental lumber, 41 MM BF of incremental engineered wood products, and 142 MM SF of incremental wood structural panels. WoodWorks support of these professionals can lay the groundwork for long-term industry growth when economic conditions improve.

•

The USDA announced the appointment of four members to serve on the Softwood Lumber Board: Keith O’Rear from Weyerhaeuser, Fritz R. Mason from Georgia Pacific, Ashlee Cribb from PotlatchDeltic, and Craig Johnston from Forest City Trading Group.

For more detail, comprehensive program updates, and additional SLB news, view the Q3 2023 Report. We always welcome industry feedback, which can be sent to info@softwoodlumberboard.org. We wish you a happy new year and look forward to continuing to build on our success and momentum in 2024.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Industry News

Component Manufacturing dverti$ dverti $ er

January 2024 #16294 Page #127

The International Code Council Releases 2024 International Codes® 2024 International Codes are now available for order and preorder on the International Code Council website Washington, D.C. – The International Code Council’s 2024 International Codes® (I-Codes) are now available for order in print and digital formats. As part of the Code Council’s digital transformation strategy to enhance the user experience, the updated I-Codes® have undergone substantial design and formatting changes, resulting in a revolutionary design that improves both readability and sustainability.

The recently released I-Codes include the 2024 editions of the: •

International Building Code®

•

International Existing Building Code®

•

International Fuel Gas Code®

•

International Mechanical Code®

•

International Plumbing Code®

•

International Private Sewage Disposal Code®

•

International Property Maintenance Code®

•

International Swimming Pool and Spa Code®

•

International Wildland-Urban Interface Code®

• •

International Zoning Code® ICC Performance Code for Buildings and Facilities®

The remaining 2024 International Codes will be released in early 2024.

“We are continuously looking for ways to improve the user experience,” said Code Council Chief Executive Officer Dominic Sims, CBO. “The 2024 I-Codes enhance safety, increase affordability and incorporate the latest advancements in building science, and we are looking forward to users engaging with the new format.”

Other notable changes to the 2024 I-Codes include QR codes replacing marginal markings and a new NFC tag pilot program. More information on all of the style changes made to the I-Codes can be found online.

Go online to preorder or purchase the 2024 I-codes.

About the International Code Council The International Code Council is the leading global source of model codes and standards and building safety solutions. Code Council codes, standards and solutions are used to ensure safe, affordable and sustainable communities and buildings worldwide.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

● ● ●

Component Manufacturing dverti$ dverti $ er

Advertiser Directory A Don’t Forget!

You Saw it in the

dverti$ $er

January 2024 #16294 Page #128

4Ward Solutions Group www.4wardconsult.com 623-512-6770 ben@4wardconsult.com

Eide Integrated Systems eideintegratedsystems.com 612-521-9193 ext 204 tom@eidemachinery.com

Acceptance Leasing & Financing Service, Inc. www.acceptlease.com 412-262-3225 cvillella@acceptlease.com

Element Equipment

by GOW Group Inc. www.element-equipment.ca 800-799-4711 info@element-equipment.ca

Acer Inc. www.acerinc.com 507-864-2220 sales@acerinc.com

EstiFrame Technologies, Inc. www.estiframe.com 209-576-5000 cgifford@estiframe.com

All Points Technical www.AllPoints.Tech 941-713-4395 Dave.AllPoints@gmail.com

Fitzgerald Group, LLC www.fitzgroup.com 719-528-5445 rfitzgerald@fitzgroup.com

Alpine 800-521-9790 mschwitter@alpineitw.com

HOLTEC USA Corporation www.holtecusa.com 813-754-1665 info@holtecusa.com

BuyMetrics® www.buymetrics.com 888-485-8623 info@buymetrics.com

Hundegger USA www.hundeggerusa.com 435-654-3028 steve@hundeggerusa.com

Clark Industries, Inc. www.clark-ind.com 800-743-9727 general@clark-ind.com

LimTek Solutions limteksolutions.com 416-888-4457 edmond.lim@limteksolutions.com

PlanSwift Lumber and Building Material Takeoffs Truss and Wall Panel Design Experienced Staff EWP Layouts and much more!

All Points was launched by Industry Veteran Dave Walstad with over 20 years of Offshore Experience to create the Gold Standard in Technical Support Teams.

Dave.AllPoints@gmail.com 1-941-713-4395

www.AllPoints.Tech AN ITW COMPANY

Your Solution for Lack ofwww.alpineitw.com Technical Staff

Offices in: Panama City Beach, FL USA HCMC (Saigon), Vietnam Bengaluru, India

Eliminate your lack of technical resources to grow sales and increase the clock speed of your company. We have the network and experience you can count on. Deploy Technical Teams from All Points!

Eagle Metal www.eaglemetal.com 800-521-3245 connect@eaglemetal.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

MiTek USA www.mitek-us.com 800-325-8075 customerservice@mii.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

he Hain Company

You Saw it in the

Hain Engineering Services Company Overview Products Companies We Represent Hain Racing Products

Triad | Merrick Machine www.triadmachines.com 800-568-7423 ext 133 mmcsales@merrickmachine.com

ROGworx Automation www.ROGworx.com 707-333-4507 sales@ROGworx.com

Vekta USA www.vektausa.com 907-230-8276 info@vektausa.com

Simpson Strong-Tie www.strongtie.com 800-999-5099 web@strongtie.com

Wasserman & Associates www.wasserman-associates.com 800-382-0329 sales@wasserman-associates.com

Spida Machinery USA www.spida.com 866-647-7771 sales@spida.com

Wolf X Machina www.wolfxmachina.com info@wolfxmachina.com

The Hain Company www.thehaincompany.com 530-295-8068 sales@thehaincompany.com

Wood Tech Systems, Inc. www.woodtechsystems.com 765-751-9990 info@woodtechsystems.com

TheJobLine.com www.thejobline.com 800-289-5627 mail@thejobline.com

Welcome to The Hain Company's website! Here you will find information about the Hain Company and its line of innovative products that can help streamline your company.

Our products are diversely used throughout the manufacturing industry to speed production and reduce labor costs.

Timber Products Inspection www.tpinspection.com 770-922-8000

News

Request Form Contact Us Mailing List Used Products Leasing & Financing Services About Hain Racing

PHONE: 800-289-5627

dverti$ $er

Panels Plus www.panplus.com 866-726-7587 tkaasa@panplus.com

Welcome

Home

January 2024 #16294 Page #129

Advertiser Directory A Don’t Forget!

Todd Drummond Consulting, LLC. www.todd-drummond.com 603-748-1051 todd@todd-drummond.com

Products All Measuring Systems Your Company can be Listed in Hain Systems Framer TheSub Component Nailer

Adverti$er

Quick Rafter Cutter

Contact Anna Stamm Vent Block Drills Anna@componentadvertiser.org 800-289-5627 x3 Hain Racing

Offset Drive Aluminum Valve Contact ourCover Advertisers

Used Products for manufacturing and handling Refurbished QRC equipment, saws, plates and Refurbished VBD Refurbished MEA connectors, software, business Refurbished SCN management, financing, third-party Refurbished MMEA inspections, employment services, Monet Desauw transportation equipment, Component Saws

and much more!

Floor Web Saw

Material Handling Used Equipment

Companies We Read/Subscribe online at www.componentadvertiser.com Represent

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

the

Hiring Zone

job opportunities available

For Information on Any of these Job Opportunities Visit: The Hiring Zone CFS Wall Panel Estimator 230920 Employer: Client Confidential

Hybrid Remote Truss Designer - Single Family J14212 Employer: Client Confidential

We are a fast growing Midwest company that is looking for someone with at least 5-10 years experience doing costs estimates, takeoffs, and bids for commercial cold-formed steel load-bearing wall panel projects. Our niche is in the hospitality and assisted living/ retirement industries and we are in our 3rd year of consecutive record sales and profits.

If you are a mid to senior level Truss designer, able to design for mostly single family custom and production builder type projects, able to design in savings and create packages that work in the plant and on site, this is a job you should consider. The company uses MiTek but will consider other truss design software experience.

This job requires someone who is used to working with repetitive tasks, but also finding savings and minimizing errors.

Remote Truss Designer J15228 Employer: Client Confidential Details: Our client in the Southeast is looking for Remote Truss Designer. Work remote, or in an office location. They need senior level Remote Truss Designers and Intermediate level may be considered. Fantastic benefits, compensation is very competitive, and they use MiTek software. Remote is an option if you have a home office and remote experience, or you can work in one of their offices. They may consider someone without remote experience, just depends on the skill level. Must be in the Southeast

January 2024 #16294 Page #130

Truss Designer J15286 Employer: Client Confidential Products include floor and roof trusses, I-Joists, wall panels, MiTek. Panel experience is a plus! JobLine Senior Designer rating is preferred.

This is an In-Office position only.

No remote, but part time remote may be available, depending upon skills and experience.

Thom's Notes: One of my "A" list employers, great benefits, competitive compensation plus very competitive bonus program.

When I place someone there, they stick! Very tight specifications Remote Truss & Panel Designer for this employer. Relocation J15290 assistance is available.

Employer: Client Confidential Regional Mega-Multifamily Truss Designer for Single Family Truss Designer Custom and Production Builder Mega-Multifamily Estimator/ projects. Products include floor and Designer needed to support roof trusses, I-Joists, wall panels, multiple plants. Duties include MiTek. Panel experience is a plus! modeling for estimating and full JobLine Senior Designer rating is designs of multifamily projects. preferred. Remote or hybrid remote Intermediate or advanced skill level may be available, depending upon will be considered using JobLine's skills and experience.

Truss Design Skills Evaluation.

This job is local, remote (Eastern Time Zone), or hybrid. Relocation assistance is negotiable if you plan to work in the office. Please inquire

A

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

for additional details and to be considered for this position.

Hiring Zone

Compensation: $33-43hr based on skills and ability. average 45 hours a week. Can interview onsite or remotely.

Building Component Industry

Remote Mega-Multifamily Estimator J15227 Employer: Client Confidential Remote Mega-Multifamily Truss Estimator opportunity. Qualified candidates will already know the general duties and skills needed for this position and additional details can be obtained prior to approving presentation. Employer will consider 3+ years single family design experience. Training and position is remote. Expert level Remote MMF Estimators are afforded top consideration but the employer is very willing to train experienced single family designers wishing to become MMF Designers. This position is a stepping stone to a MMF Design job if you are interested.

Job Board Employer to Candidate Direct Hiring No Recruiting Fees!

Post your Opportunity...

Candidates respond directly to you!

For Additional Information Contact: twm@componentadvertiser.org or Call 800-289-5627 x1

For Rates and Posting, visit our website: www.componentadvertiser. com/Hiring-Zone

Truss Designer - MiTek/ Multifamily J14173 Employer: Client Confidential

Lead Designer 22-0811-2 Employer: ProTec Panel & Truss

JobLine Senior Designer ranking and MiTek software experience (Sapphire preferred) is highly desirable for this position. Prefer someone with commercial and multifamily experience but strong Single Family Custom will be considered. Bring your friends!

In-office position. Remote is not an option.

ProTec Panel & Truss is looking to add a Lead Designer to our team.

The designer will be responsible for the production of detailed shop drawings for component manufacturing using Mitek Software. They will contribute to the Design Team's success by working with team members to check accuracy and assist entry level designers.

The Hiring Zone is operated by The Component Manufacturing Advertiser Magazine. All applications will be sent exclusively to the advertising company.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Maximize production with integrated off-site technologies Increase the productivity of your component manufacturing operation with the latest off-site solutions and prefabrication technology. From software that manages many aspects of your business to machinery that maximizes your output, MiTek is committed to the growth of your business and the industry.

Together, we’re unlocking the power of off-site construction.

Together, we are innovating to meet the needs of an evolving market.

Are you ready to maximize productivity of your operation?

Talk to a MiTek Representative to get started.

MII.COM/CM

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #132

The Last Word Serving the Most Deserving

A

special opportunity to help special people exists near most truss plants, as was discovered independently by both Richard Pedde and me. This Joe Kannapell, P.E. “find” has turned out to be such a blessing to Richard that he constantly chides himself for passing by this resource twice a day for seven years without stopping. But fortunately, his staffing struggles got him through the front door of the Cleveland (County) Vocational Industries, and there he found a group of dedicated, but disadvantaged, workers engaged in multiple meaningful tasks. After a brief tour and discussions with the facility manager, he began to formulate a plan to employ these workers for his truss plant, Rafters and Walls LLC, just outside the Charlotte, North Carolina Metro area.

Richard had long been bothered by the many hours his truss builders would have to spend taking plates from boxes and stacking them on truss tables ahead of assembly. This task was especially time consuming when they had to dig through tumble-packed boxes. He thought initially that the Cleveland facility’s workers could come to his plant to perform this work. However, he quickly realized that these folks are best served by working in a controlled environment in what is known as a sheltered workshop, in a facility set up to best harness their capabilities.

Richard then procured multiple color-coded and properly sized bins for Cleveland’s workers so that they could create manageable units of plates for his truss builders. And this repackaging work was right in line with other repetitive tasks then being carried out at the shelter.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget!

You Saw it in the

Adverti$$er

January 2024 #16294 Page #133

I coincidentally found another such workshop, Canterbury Industries in south St. Louis, and was amazed to discover how easy it was to initiate a similar project there. The executive director, Charlie Fischer, was so happy to receive this kind of work for his special crew there. After a couple of weeks experimenting with different approaches, Charlie developed an efficient method for them to repackage truss plates in bundles of twenty using heavy-duty rubber bands, and he also was able to provide a reasonable “piece rate” for the work. Charlie explained to me that by tailoring this kind of work to the capabilities of his variously talented individuals, they can obtain significant productivity. Most importantly, he stated, they derive a much-deserved sense of accomplishment, which is clearly visible in their demeanor.

Why not off-load a task that truss assemblers disdain and provide meaningful work for those that can best appreciate it? As Richard Pedde observes, the cost of providing this service to his community is miniscule in the scheme of things. Sorting plates, he says, “utilizes the highest form of IT and robotics available… it’s just in the form of people who also happen to be different from you and me.”

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

See it for yourself:

Scan the QR code to see the machine in action: BIG game-changer You’ve GOT to see THIS. Now THIS is impressive! over

133