Component Manufacturing Advertiser by Component Manufacturing Advertiser

120

PUBLISHED WEEKLY November 11th 2011

COMPONENT MANUFACTURING dverti$er

#04120

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Inside: 84 Lumber Pays $726K as Part of California Labor Settlement... page 3 Weyerhaeuser Returns to its Roots for Wood Products Business Name... page 8 National Softwood Lumber Board Members Appointed – Check-off Program... page 11

Also In This Issue... Madison’s Canadian Lumber Reporter: Page 12 Keymark Blog: Truss Repair and Replacement Page 21 Hiring Zone: Job Openings & Seekers Page 24 Safety First Topics in English/Spanish: Page 29

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

Page #2

 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

(Usually Available by Fridays)

Thomas McAnally

Advertising Thomas McAnally Position Available Distributed FREE via e-mail subscription

84 Lumber Pays $726K as Part of California Labor Settlement Company was one of five fined for underpaying employees and labor violations Source: PROSALES Information Service Publication date: November 3, 2011

Download FREE and subscribe by e-mail at www.componentadvertiser.com

Send an e-mail with subscription request to Info@componentadvertiser.com

News of interest can be submitted to: info@componentadvertiser.com We offer one point for many sources Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk Copyright 2008-2009-2010 -2011 Component Manufacturing Advertiser PO Box 16685 Fernandina Beach, FL. 32035 NO REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION FROM THE COMPONENT MANUFACTURING ADVERTISER

By Brendan Rimetz 84 Lumber agreed to pay over $725,000 as part of a settlement with the California Department of Industrial Relations' (DIR) Division of Labor Standards stemming from a 2009 investigation of labor practices at a state university construction site. The total payment covers $726,063.24, of which $564,938.24 is for outstanding wages and $161,125 is for related penalties. The investigation involved the Tercero Housing Project at the University of California, Davis. 84 Lumber was originally hired by the project's general contractor, Brown Construction, to perform framing work on the building. 84 Lumber, in turn, subcontracted the work out to Russell/ Thompson Inc., a Redding, Calif.-based company.

e ic on Pr cti du Re

2002 Alpine AutoMill RS Component Saw Model 344, five-blade saw with (1) 20” blade, (3) 18” blades and (1) 32” blade. Cuts lumber lengths from 13” 90/90 to 20 feet and sizes 2x3 to 2x12” depths. Touch screen controls, digital displays, powered angulation and length. Includes scrap conveyor and incline. 480 volt, 3 phase, 53 Amps. $32,900 NOW $26,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Continued on page 6

Advertiser “Stuff” Thomas McAnally - Publisher

Free Equipment Wanted Ads? As the industry starts to pick up, some of you will look for a bargain, some need to replace worn out equipment, and hopefully many will need to expand operations. There is no better way than to tell the industry by placing your ad in the Advertiser. Before we jump in and start a new section, develop display and print ad pricing, let’s see if you have any use for an “Equipment Wanted” section. Wasserman and Associates, and Wood Truss Systems both have Equipment Wanted ads, but what about our manufacturers? Let’s test this out for a few weeks and see if anyone bites. We are offering a free Text Only Equipment Wanted ad, one column wide by 3” tall, or so. You should be able to describe what you are looking for, where you are, and what condition or price range you are willing to consider. Need parts? That is free too for now. Email your Equipment Wanted ad to me and I will insert it for one month free! Give us your feedback at: info@componentadvertiser.com

PHONE: 800-289-5627

Page #3

SAWS

Published Mondays Editor/Publisher

November 11th, 2011 #04120

2002 Koskovich Auto Omni Component Saw Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900. Wood Truss Systems 888.288.9874

1999 MiTek Cyber Saw Frame #094, Fully automated five-blade component saw. 2-16" X 6HP, 2-20" X 6HP, 1-32" X 12.5HP. w/Dell PC upgrade, touch screen controls, fully automated or manual input, cuts 2x4 thru 2x12 and 4x2. Lengths 11 inches to 20 feet. Includes scrap conveyor (no incline) 220V/60Hz/3ph. $29,987 FOB NY. Wood Truss Systems 888.288.9874

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

1986 Timber Mill Saw 1986 Timber Mill Saw / 5 Bladed / MH 5A-20 / SN 00274 / Set extra blades / 480 Volts 3ph. Total footprint dimensions 12’ wide’ x 42’ long x 8’ tall. Good mechanical condition / Purchased Used / Plant Closed 2009 / Last Operated 07/2011



November 11th, 2011 #04120 Page #4

SAWS

FOB Atlanta $3,500

.(A Step-up Transformer is Available to convert your

230/240 Volts source to 440/480 Volts Output)

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

2003 Alpine ALS Linear Saw 275c Was $39,900 NOW $34,900 FOB TX

 PHONE: 800-289-5627

Linear fed saw Model #275C, cuts all truss parts from any lumber width, cuts bevels from 90 to 25 degrees, 60"+ scarf cuts, optimizes material, production rates +2000 pcs. / 8 hr. shift. Includes 20 ft OEM infeed conveyor and 15 ft OEM outfeed conveyor, Ink jet printer, and belt scrap conveyor. All servo controlled functions, 7.5 hp motor with (1) 20" carbide tipped blade. 240v 3ph

2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw

2002 Hain Quick Rafter Cutter

Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 - FOB IL) Wasserman & Associates 800-382-0329

Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 888.288.9874

2005 Koskovich Auto Omni Component Saw

2002 Alpine AutoMill RS 5 Blade Automated Component Saw including Live Deck

Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical. Wood Truss Systems 888.288.9874

Automated via Download or SemiAutomated via Touch Screen Input 19 Axes of Automation. Cut 2x3 thru 2x12 from 13” to 20’. Label Printer. 5 Chain Live Deck. Extra Set of Blades. Waste & Incline Conveyor. Self Dumping Hopper. $40,000 FOB WA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

ASI WA 500 Floor Web Saw Idaco Componamatic 4 Blade Component Saw -Reconditioned in 2003 -Cuts 2x4 thru 2x12 from 12" to 24' -Powered Angulation & Carriage - B e l t Wa s t e & I n c l i n e C o n v e y o r -230 Volt / 3 Phase . $5,900 FOB ID. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Four blade saw that includes shaker pan and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut is 9 inches and the shortest angle cut is 15 inches. The saw cuts 2x4 lumber up to 10 feet in length. Angles are set using digital readouts. Both the length and angle adjustments are power driven. $10,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #5

SAWS

2005 MiTek Cyber A/T

R P ed r u ice ct io n

Fully automated five-blade component saw with Dell pc upgrade. Cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor w/remote PC [PC driven] in enclosure for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode) Belt scrap conveyor included with long incline (approx. 12') 230v, 3ph power required, spare set of blades included. $74,500 NOW $69,000 FOB OH. Wood Truss Systems 888.288.9874

2006 Spida Automated Truss Saw

 SAWS

SAWS

2005 Virtek LaserMC Wall Panel Cutting & Marking System

2000 Alpine Speed Cut Mobile Little Framer

2000 Alpine Metra-Cut Centerline Saw with 2006 Speed Cut Express Automation System

-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output. Vista Angle Boss Cut-Off Saw. 20’ Capacity. Environmental Computer Enclosure with Computer/ Monitor. $39,000 NOW $32,500 FOB IL. Wasserman & Associates 800-382-0329

PHONE: 800-289-5627

(Trailer Mounted Radial Arm Saw) 16” Blade, 24” Cross Cut x 6” Depth, 10 Degree to 170 Degree Angular Capacity, -5 HP / 220 Volt / 1 Phase. $4,500 FOB WA Wasserman & Associates 800-382-0329

Touch Screen PC & Cabinet, 2 Axis of Servo Controlled Automation, Label Printer, 3 Extra Blades, 480 Volt/3 Phase. $16,900 NOW $13,900 FOB MN. Wasserman & Associates 800-382-0329

R P ed r u ice ct io n

SAWS

R P ed r u ice ct io n

Automated Stop & Automated Saw Rotation as directed by Truss Design Software. Generation 3 Software. NOW $16,500 FOB LA. Wasserman & Associates 800-382-0329

2004 Mitek Cyber A/T 5 Blade Automated Component Saw Wa s t e & I n c l i n e C o n v e y o r. NOW $55,000 Includes $5,000 Parts Allowance. FOB AZ. Wasserman & Associates 800-382-0329

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

 NEW! 1999 Alpine AutoMill Component Saw

Koskovich

Model 343-G, five-blade saw with (1) 20” blade, (3) 18” blades and Auto Omni (1) 32” blade. Cuts lumber lengths $19,900 FOBSaw TX from 13” 90/90 to 20 feet and sizes Component 2x3 to 2x12” depths. Touch screen Wood Truss controls, digital display, powered ood inc. Systemsruss angulation and length. Includes ystems scrap conveyor and incline. 480 volt, Toll Free: MANUFACTURERS’ REPRESENTATIVES Combining the qualities and expertise3you should expect from an industry supplier phase, 56 Amps

Toll Free: 888.288.9874

inc.

MANUFACTURERS’ REPRESENTATIVES

888.288.9874

NEW 1999, five-blade Auto-Omni never unpacked from OEM shipment. This outstanding new computerized saw is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. Includes optional Matthews Ink-Jet Printer, spare set of blades, shaker-pan waste conveyor with OEM shaker side pans, includes fully complete spare parts kits, OEM system PC with enclosure. This new saw is available for inspection, and is ready for many years of good service. Expert installation and support available from MiTek and other independent reps. 90 amp 208/230/460v, 3 phase, and 90 amp 120vac electrical service re-

1996 Alpine Autoweb Sawquired. $97,500 SC BankFOB Sale WA Price 00 NOW $7,500 $69,900

480V - Includes Zebra 105S Label Maker Cost $130,0000 New

SAWS

November 11th, 2011 #04120

Don’t Forget! You Saw it in the

SAWS

Page #6

84 Lumber Settlement Continued from page 3

"This settlement will make available wages that should have been rightfully paid to workers," said Julie Su, labor commissioner. "It also sends a strong message that on public works projects, prime contractors will be held responsible when their subcontractors fail to follow labor laws." The investigation found that the subcontractor failed to pay overtime and misclassified workers by identifying them as lower skilled workers rather than as the higher skilled positions they actually worked. A June 2010 decision by the labor commissioner ordered Russell/Thompson to pay $1.3 million in back wages and $200,000 in fines. After the decision a civil wage and penalty assessment was served against 84 Lumber and Brown Construction. The Eighty Four, Pa.-based dealer was one of four contractors fined to wage violations at the Tercero Housing Project at the University of California, Davis. Two other subcontractors from the project, Kings Drywall and JL Home Development, were also ordered to pay more than $1.3 million in back wages as a result of the investigation. "This public works project represents a considerable investment of public funds, and contractors on these projects must be held accountable," said DIR acting director Christine Baker. 84 Lumber is ranked No. 5 on the ProSales 100 with 2010 sales of $1.4 billion. It operates roughly GET RESULTS ! 250 stores throughout the country. WITH THE The company did not comment for ADVERTISER the story.

TRUSS EQUIPMENT

2006 Virtek Laser MC Automated plate cutting/laser burning layout system is complete with Virtek Laser MC Class IV laser w/computer workstation, Vista Angle Boss undertable cut-off saw and infeed table with lumber advance pusher bar cuts material from 2"-10" thick up to 16' in length. System precision cuts and laser marks wall panel parts with extreme accuracy, infeed speed of 30" per sec., optimizes lumber usage, minimizes scrap, improves quality and reduces labor, 20" blade, power in-feed deck, 480V, 3ph power. Safety guard, pusher system and motor included. MS Windows 95 operating system provides easy user interface, reduces operator error and speeds production. Requires 480V, 3ph power for saw, two 110 volt, single phase circuits required for the PC and the laser. 80 PSI air. $49,000 FOB OH Wood Truss Systems 888.288.9874

PHONE: 800-289-5627

2006 TCT EZ Trimmer

Clary Kick Leg Floor Machine

cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 888.288.9874

Floor truss press includes gantry head with 20 inch diameter roll, steel table, kick legs, air-cylinder clamping, operator platform and end stops. Builds from 12" to 24" deep trusses, up to 40 foot long. Gantry has toggle forward / reverse & stop controls. Includes partial, overhead plate rack. 230 volt, 3 phase electrical. $11,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

November 11th, 2011 #04120

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

News Release

Page #7

TRUSS EQUIPMENT

Weyerhaeuser Returns to its Roots for Wood Products Business Name FEDERAL WAY, Wash., August 31, 2011 —

Weyerhaeuser Company – a leading manufacturer and distributor of building products, software and services – is transitioning the name of its wood products business to the Weyerhaeuser brand. The "iLevel by Weyerhaeuser" business will simply be known as "Weyerhaeuser." Under the Weyerhaeuser banner, the company also will enhance promotion of its Trus Joist® brand of engineered lumber products – one of the most trusted brands in the building industry. Weyerhaeuser is making the name change to simplify customer contacts and leverage the widespread recognition of the Weyerhaeuser identity. The name transition is designed to be seamless for customers. They will still have access to their same sales representatives, along with Weyerhaeuser’s full range of quality building materials, including Trus Joist® TJI® joists, TimberStrand® LSL, Parallam® PSL, and Microllam® LVL; Weyerhaeuser lumber, plywood, and oriented strand board (OSB); tools such as Javelin® design software, Stellar® fabrication software, and Forte® single-member sizing software; and third-party manufactured products including siding and trim, insulation and housewrap, steel concrete reinforcing materials, and other product lines.

04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform. 24 roll -10HP motor w/electric softstart. Item F1026 Truss Machinery Connections 800-580-6430

"Our customers and vendors know us best as ‘Weyerhaeuser,’ so we are returning to what is most familiar to them," said Larry Burrows, Weyerhaeuser Senior Vice President of Wood Products. "The Weyerhaeuser brand represents more Clary 6 Ft. Finish Press than 100 years of strength, stability, and top-quality products and services. As we’ve done for decades, we’ll continue to innovate and provide builders and Six foot throat finish roller with 20" rolls. dealers with cost effective solutions for the residential, multi-family and light Presses 1 1/2" thickness. Push button controls. Includes (2) 2 foot wide roller commercial construction markets." About Weyerhaeuser Wood Products The Weyerhaeuser Wood Products business provides the building industry’s most comprehensive and innovative collection of structural framing products, support and software for residential, multi-family and light construction. As an industry leader, Weyerhaeuser develops solutions to help builders and dealers improve quality and reduce costs. Continuing a legacy based on more than 110 years in business, and 50 plus years of expertise from Trus Joist®, Weyerhaeuser manufactures trusted engineered wood products, oriented strand board (OSB), plywood and lumber. All of the products the company produces are SFI® certified. Weyerhaeuser is also one of the nation’s leading building products distributors, offering a range of construction and finishing materials from other recognized manufacturers.

PHONE: 800-289-5627

Alpine Speed Roll, floor truss press includes gantry head with 20 inch diameter roll, steel table, kick legs, air-cylinder clamping, operator platform and end stops. Builds from 12" to 24" deep trusses, up to 40 foot long. Gantry has toggle forward / reverse & stop controls. Includes partial, overhead plate rack, (4) 78" wide idler conveyors & (4) 38" wide idler conveyors. 230 volt, 3 phase electrical. $9,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Your Ad Could Be HERE

conveyors, 10 feet long each. 240 volt, 3 phase. $3,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

MiTek 4-Head Flat

About Weyerhaeuser Weyerhaeuser Company, one of the world’s largest forest products companies, began operations in 1900. We grow and harvest trees, build homes and make a range of forest products essential to everyday lives. We manage our timberland on a sustainable basis in compliance with internationally recognized forestry standards. At the end of 2010, we employed approximately 14,000 employees in 10 countries. We have customers worldwide and generated $6.6 billion in sales in 2010. Our stock trades on the New York Stock exchange under the symbol WY. Additional information about us is available at http://www.weyerhaeuser.com.

Alpine Speed Roll Kick Leg Floor Machine

Stacker Automatic, four pedestal flat stacker with controls. Stacks all truss configurations both left and right to 150'. Compatible with existing conveyor systems. Includes 150' of power/idler conveyors. 460 volt, 3 phase. $29,000 FOB OH

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

WWPA Newsroom

TRUSS EQUIPMENT

Page #8

TRUSS EQUIPMENT

11-3-2011

National Softwood Lumber Board Members Appointed – Check-off Program WASHINGTON, Nov. 1, 2011 – U.S. Department of Agriculture Secretary Tom Vilsack today appointed 19 representatives to serve on the first national Softwood Lumber Board. Members will serve two, three or four-year terms of office. Members appointed to represent U.S. manufacturers are: Alden J. Robbins for the Northeast and Lake states region; Jack Jordan, Henry C. Scott, Michael Case, Robert Taylor, Fritz Mason and Aubra Anthony, Jr. for the South region; and Steven J. Zika, Marc A. Brinkmeyer, George R. Emmerson, Andrew W. Miller and Rick Re for the West region. Members appointed to represent Canadian importers are: James Lopez and Charles Tardif for the East region; and Duncan Davies, Al Thorlakson, Hank Ketcham and H. David Gray for the West region. Francisco Figueroa will represent all other importing countries.

Design your own custom roof truss gantry! Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 888.288.9874

“These appointees represent a cross-section of the industry, and bring a wealth of diverse perspectives and backgrounds to the board,” said Vilsack. “I am confident that manufacturers, importers and others in the softwood lumber supply chain will be well served by them.”

2007 Klaisler Floor-Truss AgriStack AGS

The first Softwood Lumber Board meeting is scheduled for Nov. 29 and Nov. 30, 2011, at the Hilton Chicago O’Hare Airport in Illinois. Contact Maureen Pello at (503) 632-8848 begin_of_the_skype_highlighting (503) 632-8848 end_of_the_skype_highlighting or via e-mail at 1997 Pacific Automation Auto-8 (40’) Truss Press Maureen.Pello@ams.usda.gov for additional meeting information. USDA’s Agricultural Marketing Service (AMS) will provide oversight of the Softwood Lumber Board in accordance with the Commodity Promotion, Research and Information Act of 1996 and the Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order. Under the order, domestic manufacturers and Continued on page 11

2006 MiTek Infeed Deck 2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity. Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 888.288.9874

-8' x 40' Drilled & Tapped Steel Table -50 Ton Hydraulic Press -24" x 96" Platen -Floor Truss Jig -Press 2x4 and 4x2 with no adjustment. $29,500 FOB ID. NOW $18,900 Wasserman & Associates 800-382-0329

Klaisler Agri-Stack AGS-02-0107, Heavyduty, 2 Pedestal stacker system consisting of two 2"x3" steel lift-arms, 2 stationary pedestals spaced 15' apart (15' total area), 2 aluminum upright arms, Sumitomo braking gear motors, two 6'x20' powered, 6 roller sections with 2.25 H,P, Sumitomo shaftmount gear-motors, stacks up to 40' floor trusses with a 30-40 second cycle time. Stacking operations controlled by reversing starter panel with independent motor overload protection control panel (push button controls included). Multi voltage 208/230/460v, 3ph. $12,500 FOB SC. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com



PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #9

TRUSS EQUIPMENT

2 0 0 3 R o b b i n s " S u p e r To r q u e " 14' x 24" Diameter Finish Roller

TRUSS EQUIPMENT

2001 Mitek Interior Exit System

14’ X 20’’ Clary with Dual Drive

TRUSS EQUIPMENT

-230 Volt / 3 Phase -$9,900 FOB SK Wasserman & Associates 800-382-0329 www.wasserman-associates.com

•a- (14) Exit Idle Rollers / 4.5” x 14’ long •b- (12) Exit Powered Rollers / 4.5 x 14’ long •c- (28) Receiver Arms SALTER & ASSOCIATES 770.434.1006 www.salter.com

1999 Alpine Mighty Mite Truss Assembly System

Reconditioned / F.O.B Windsor / Detroit. FOB Windsor/Detroit MI. SALTER & ASSOCIATES 770.434.1006 www.salter.com

-5’ x 20’ Table (needs new wood top) -(2) 4” Diameter Hydraulic Cylinders at 31,000 Lbs Each -240 Volt / 3 Phase / 5 HP Motor. $7,900 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Mitek Lumber Splicer HP Hydraulic System. 3" x 12" Maximum Plate Size (2x4 Material). Magnetic Platens for Plate Placement. Pneumatic Lumber Clamps. Foot Pedal Control for Clamping, Dual Push Button Control for Pressing. $4,750 FOB WY Wasserman & Associates 800-382-0329

2001 Mitek (1) 120’ Roof Glider 2005 MiTek RailRider End Eject Floor Machine

2001 Tee-Lok TeeFloor Roller Press Side-eject, trackless operation, with slotted top, builds floor trusses to 26” width (depth) up to 40’ in length (System 6’W x 48’L). Gantry features a 24 inch diameter roll, 7.5 HP motor, end-stops, and “fire hose” style pneumatic clamping for smooth movement. 230/460V, 3 phase electrical service. $19,500 FOB NC. Wood Truss Systems 888.288.9874

End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks. Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 888.288.9874

(Plastic Top) / (2) Gantry Heads / Model # a- 82700-501 Gantry Head #1 b- 82700-501 Gantry Head #2 / SN # a-0109102450-03 Gantry Head #1 b-01091012450-04 Gantry Head / (15) Tables w/ Plastic Top / 22 Bridge Plates / seller shall supply new joystick control. $49,500 OBO, FOB FL SALTER & ASSOCIATES 770.434.1006 www.salter.com

2005 Virtek Laser MC Reduced to 39,000 /FOB FL Cut and mark wall plates using the Automated Virtek Laser MC. System features a Class IV laser for marking and a M-20 Autoset-V Vista Angle Boss saw (20" Blade) for cutting. #WP1006 Truss Machinery Connections 800-580-6430

2001 Mitek (1) 120’ Roof Glider (Plastic Top) / (2) Gantry Heads / Model # a- 82700-501 Gantry Head #1 b- 82700-501 Gantry Head #2 / SN # a- 01091012709-02 Gantry Head #1 b-01091012709-03 Gantry Head #2 / (2) Gantry Heads / (15) Tables w/ Plastic Top / 12 Bridge Plates. $49,500 OBO, FOB FL. SALTER & ASSOCIATES 770.434.1006 www.salter.com

PHONE: 800-289-5627

2005 Koskovich Jet-Set 23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 888.288.9874

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

November 11th, 2011 #04120

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #10

Join the Southern Pine Partnership!

TRUSS EQUIPMENT

Since 1915

 2007 RAND / AIR SET / FLOOR TRUSS GANTRY 40' Roll Driven Floor Truss Machine / Builds 10" min to 30" max Deep Floor Trusses. MD-10-30-14

$39,500 FOB AR

As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org



Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier



800-382-0329 2005 Robbins "No Rail" Roller Gantry System

Side eject, trackless system 14 feet x 90 feet working length, with (12) 6’-4” x 14 foot, slotted 3/4" steel-top with ejectors. System includes (1) Roof Tracker gantry head, with a 24 inch diameter roll and pendant control. Features full-length powered transfer

e ic ion $72,000 r NOW $69,000 P ct u FOB TX d Re

- 14’ x 130’ System with 2 Roller Gantries -2005 Robbins "Super Torque" 14' x 24" Diameter Roller Gantry (Trackless) -Slotted Top Tables with Pop-up Skatewheel Ejectors -Roof Truss Jig Hardware -Roller Gantry Park Sections -Powered Transfer Roller -Excludes Powered Exiting Conveyor & Finish Roller (available at additional expense) Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

PHONE: 800-289-5627

2006 MiTek RoofTracker Gantry System

roll, (20) pwr conv. and (20) idle conv. air-manifold, bridge-plates and electrical supply cable with gantry mast are included. Used 209 hours. 230 volt, 3 phase. Also includes (1) 2004 Pacific Automated Auto Roll 14 finish roller press with infeed idler conveyors, 24” diameter rolls, panic bars and button controls. 208/230volt, 3phase.

$74,900 FOB UT

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

November 11th, 2011 #04120

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #11

WWPA NEWS from page 8

importers who ship 15 million board feet or more annually will pay an assessment rate of 35 cents per thousand board feet beginning Jan. 1, 2012.

Wood Truss Systems

inc.

Research and promotion programs are industry driven programs funded through member assessments and administered by board members selected by the Secretary of Agriculture. They allow commodity groups to conduct promotion, market and production research and new product development for the benefit of their industries. AMS monitors board operations. Visit www.ams.usda.gov/FVPromotion for more information about research and promotion programs.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

2004 MiTek RoofGlider Gantry 94 foot working length, MiTek side-eject system featuring 14 feet working height, tracked system with (12) 6’4” x 14 foot, slotted 3/4” steel-top tables with ejectors

Time to Hire? Give us a call...

and (6) slots per table. Includes (1) 14’x24” dia. gantry head with operator platform, (10) stand-alone receivers, (20) powered conveyors, (15) idler conveyors, powered transfer roll, air-manifold, gantry head electrical chord system, bridgeplates and Tekset jigging hardware. 208v, 3phase electrical.

All Searches are

STRICTLY CONFIDENTIAL! The

JobLine.com,

inc.

800-289-JOBS www.thejobline.com

$59,000 FOB UT

Toll Free: 800-382-0329

2007 IBS Interior/Exterior Wall Panel Line 

PHONE: 800-289-5627

-La -Lauderdale Hamilton Super Chop Saw with 16’ Tiger Stop -IBS Sub-Component Nailer with Infeed & Outfeed Conveyor -IBS Sub-Component Table with Pop-Up Skatewheel Conveyor & Auto Stops -IBS 12’ x 16’ Framing Table with Tool Dollies, Light Bar & Auto Stops -IBS Easy Router -IBS 12’ x 16’ Sheathing/Squaring Table with Multi-Tool Panel Bridge -Top & Bottom Plate Stitchers, Auto Return & Bridge Tilt on Panel Bridge -IBS Plant Net System - 6 Terminals with Stands -Fiber Optic Cable with 16 Port Fiber Optic Switch -Accumulation Skatewheel & Roller Conveyor -Safety Speed Cut Vertical Panel Saw -Jib Crane with Electric Hoist & Wall Panel Lift -DeWalt Chop Saw & Grizzly Dust Collector -4 Each - Tree Carts -2 Each - Material Carts -4 Each - Full Unit Bunk Carts -Excludes Nail & Staple Guns (but can be purchased from tool supplier) uderdale Hamilton Super Chop Saw with 16' Tiger Stop

-IBS Sub-Component Nailer with Infeed & Outfeed Conveyor -IBS Sub-Component Table with Pop-Up Skatewheel Conveyor & Auto Stops -IBS 12' x 16' Framing Table with Tool Dollies, Light Bar & Auto Stops -IBS Easy Router -IBS 12' x 16' Sheathing/Squaring Table with Multi-Tool Panel Bridge -Top & Bottom Plate Stitchers, Auto Return & Bridge Tilt on Panel Bridge -IBS Plant Net System - 6 Terminals with Stands -Fiber Optic Cable with 16 Port Fiber Optic Switch -Accumulation Skatewheel & Roller Conveyor -Safety Speed Cut Vertical Panel Saw -Jib Crane with Electric Hoist & Wall Panel Lift -DeWalt Chop Saw & Grizzly Dust Collector -4 Each - Tree Carts -2 Each - Material Carts -4 Each - Full Unit Bunk Carts -Excludes Nail & Staple Guns (but can be purchased from tool supplier)

$99,500 FOB MO Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

WALL PANEL EQUIPMENT

November 11th, 2011 #04120 Page #12

WALL PANEL EQUIPMENT

Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

Reconditioned Panels Plus 10’ x 20’ Framing Table -Stud Locators & Pop-up Skatewheel Conveyor on Framing Table -Motorized Telescoping Arms (for wall height adjustments) -No Rail or Track on Floor Increases Operator Safety and Simplifies Clean-up -Excludes Tool Dollies on Framing Table. $9,900 FOB NE. Wasserman & Associates 800-382-0329

Doldrums have set in for the North American lumber industry as this year winds down. Players have examined their bottom lines for the second half of 2011 and don’t like what they see. The much-needed boost of demand from China in November, as it had been for the past two years, has not materialized. There are orders of lumber going to China regularly, yes, but at the same volumes as seen monthly since July. Even the British Columbia government trade mission to China, which started Friday, is admitting greater difficulty in signing order agreements this year compared to the past two years. Unless something drastic changes over the next few days of that trade mission, 2010 will prove to have been the most successful year by far of the past three. Serious transportation issues continue to plague North American lumber producers and shippers, and it appears that things will get worse before they get better. Much worse. The supply chain is not ready for the small ramp up of solid wood demand that is coming early next year, and -- at current small shipment volumes -- is already showing strain.

2005 Triad



The rails are being no more cooperative, in Canada and in the US. Canadian lumber producers in remote northern areas have been complaining about the shoddy service provided by the CN Rail monopoly for most of this year. In the US it is Burlington Northern that abruptly decided to take a large number of newly-released, long-idled rail cars out of service for much needed maintenance.

Wall Panel Line

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

System includes a 16' long Diamond Quad framing table that builds wall heights from 6'-9" to 12'-3" with quick release feature for VTP, powered pop-ups, (26) Duofast guns, Triad Generation II squaring/ sheathing bridge with laser indicator and side shift, router bridge, (4) 36" wide x 15' long transition conveyors, (1) 1-ton panel hoist, (2) plate carts and (6) standard Triad carts. 120 volt, single phase electrical.

$34,600 FOB CO PHONE: 800-289-5627

Truckers servicing the west coast have all but abandoned lumber producers, after four solid years of uncertainty and a total lack of customer loyalty. Where sawmills used to dictate to truckers schedules and routes, truckers are now outright refusing to deliver from remote areas covering large distances with dead-head returns. In the east truckers are still agreeing to work for the lumber industry, but annual Christmas retail deliveries always usurp regular lumber shipments at this time of year. On the west coast the added demand of efficient delivery of Christmas trees takes a significant portion of truckers off lumber routes.

Shippers grumble: why can’t the railways determine bad order cars before sending them to mills for loading? A valid inquiry.

Dimension Lumber Key Prices For this week’s prices subscribe to Madison’s at www.madisonsreport.com

Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16

Last Week $222 $250 $258 $250 $220 $218 $290 $305 $195

Read/Subscribe online at www.componentadvertiser.com

Change -4 -2 -2 -5 0 -2 0 -5 0 FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #13

Toll Free: 800-382-0329

Buy/Sell Used Equipment & Manufacturers’ Representative

ALL REASONABLE OFFERS CONSIDERED!

2004 Panels Plus 10' x 16' Interior/Exterior Wall Panel Line

Hydro-Air Beaver B-80 Floor Truss Machine $4,900 FOB IA

$25,000 FOB NE

2000 Genie Model S-40 Manlift -40' Reach -500 LB Capacity -Dual Fuel Engine -4x4 - 3,203 Hours

NEW Apollo Saw with NEW Mango Truss Automation

PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker

$22,500 FOB NE

$17,900 FOB LA

(End of Year Special)

Price: $29,999.00 Excludes: Freight & Taxes

2003 Klaisler 14' x 78' Side Eject Roller Gantry System Klaisler 14' x 24" Diameter Roller Gantry (Recessed Track). (10) 14' x 76" Steel Slotted Top Tables (WEG-IT) with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers -Excludes Finish Roller.

29,500 FOB IL

2007 Lauderdale Hamiltion Up-Cut Saw with Mango Plate Marker R P ed r u ice ct io n

Apollo Saw, 5 HP, 18" Blade, Laser Blade Guide, Automated 20' Length Stop & Saw Angulation as directed by Design Software Output, 15" Touch Screen Computer, MangoTech Truss Cutting Software, 30' of Roller Conveyor with Stands, Add $2,500 for 2 Day Installation & Training, Add $650 for 12 Month MangoTech Parts Warranty, Add $180 for Spare Blade, Add $1,500 for Wall Panel Cutting Software & Hardware

Lauderdale Hamilton 24” Super Chop Up-Cut Saw. Mango Plate Marker with Touch Screen Computer. 10’ Infeed & 20’ Outfeed Roller Conveyor with Stands. Dust Collection System.

$14,900 FOB LA

2004 TCT EZ Trimmer 2006 Mitek RailRider 42' Floor Truss Machine 24” Diameter Gantry Roller with Ride Platform. Floor Truss Depths from 10” to 24”. Clamping Air Cylinders under Table. Pop-up Ejectors. 2 Gantry Park Sections.

NEW Panels Plus 12' x 16' Combination Framing/ Sheathing Table

$80,600

-2x3, 2x4 & 2x6 Capacity -Double Bevels on Pitches from 0/12 thru 12/12 -230 Volt / 3 Phase

$6,250 NOW $5,750 FOB LA

Used Norfield Magnum Door Machine & Used Norfield 250M Strike Jamb Router

FOB MN $38,900 $12,000 FOB OH FOB UT Why Buy From Wasserman & Associates? We offer One Stop Shopping and Competitive Pricing on Complete Systems!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #14

WALL PANEL EQUIPMENT

804-744-7253 www.kb-bp.com



Introducing... The New Industry Standard

Panels Plus Manual Framer

Home Owner Trusted, Builder Approved. You demand value, you want a housewrap that can stand up to tough jobsite conditions and deliver performance and dependability! You demand a product that will do the job at a competitive cost, while providing a quality product. With its tough woven construction, Breathe EZ is sufficiently strong enough to resist punctures and tearing, even under the worst weather conditions. Breathe EZ is also one of the most effective ways of reducing home energy costs. Breathe EZ maintains R-Values and reduces condensation problems on exterior walls by keeping the unwanted water out, yet allowing moisture to escape. With over 40 years of combined experience the manufacturers and developers of Breathe EZ housewrap put years of field experience, testing, and of course the demands of its customers into the all new Breathe EZ housewrap product. So rest assure that your demands can now be met, with the home owner trusted, builder approved Breathe EZ housewrap product. The New Industry Standard!

•Helps reduce air leaks •Micro-Perforated, allows water vapor to escape •Unrolls and cuts easily •Translucent, to see the subsurface for proper positioning and fastening •Lightweight and easy to handle for fast, efficient installation •Flexible, bends around corners and uneven surfaces •Tear Resistant, stays in place •UV Resistant

- “We’ve tried most all the woven house wraps, but what my customers want most, is a competitively priced product that meets our demands. That’s why we use Breathe EZ !”

UP TO 6 COLOR CUSTOM LOGO AVAILABLE

16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 888.288.9874

Wall Panel Equipment Accessories $850 - 2006 Panels Plus Handle Bar Router $850 - Used Panels Plus 15' Skatewheel Conveyor with Stands (per Pair - 2 Pairs Available) $1,500 - 2005 Panels Plus Sub-Component Layup Tables $500 - Used Yale 1/2 Ton Electric Hoist SOLD with Trolley $500 - Used Triad Wall Panel Lift SOLD $1,500 - 2007 Safety Speed Cut H4 Vertical Panel Saw $2,900 - Used Triad CN-4 Sub-Component Nailer $4,900 - 2004 Viking Fastrac 10' Portable Sheathing Bridge $145 Each - 2006 Associated Machinery 36" x 60" Material Carts - 7 Available $950 - NEW Wind Brace Saw for Wall Panel Metal Brace Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Acceptance Criteria - AC 38 - Passed & Approved

Need a Finish Roller? Robbins

Mitek Jager

Truswal Pacific Automation s We have a wide selection of popular brands! PHONE: 800-289-5627

2007 Panels Plus Sub-Component Nailer

Alpine CMF

-Maximum Opening: 17" x 17 1/2" -On/Off Switches for Each Nail Gun -Button to Activate Squaring Stop -Foot Pedal to Activate Clamping -Excludes Nail Guns $7,950 FOB OH Wasserman & Associates 800-382-0329

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

Page #15

MiTek PCS Component Express Conveyor MiTek / PCS Component Express conveyor, transfers wall subcomponents & parts between nailing stations and a framing station. Toggle controls, (2) 18” wide conveyors, 5 feet long each, included. 1 HP motor. 480 volt, 3 phase.

$3,200.00 FOB TX

Toll Free: 888.288.9874



www.woodtrusssystems.com

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

R P ed r u ice ct io n

2006 Panels Plus Wall Panel Line

Panels Plus wall assembly line including 12'x16' framing table with tool dollies and six (6) Hitachi guns, 12'x16' squaring table, sub-component layup table, wall panel lift, one (1) pair of 14' long skate wheel conveyors with stands and two (2) pair of 10' long skate wheel conveyors with stands. 120 volt electrical..

$29,500 NOW $14,900 FOB TN PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

November 11th, 2011 #04120

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Wood Truss Systems

Page #16

Toll Free: 888.288.9874

inc.

MANUFACTURERS’ REPRESENTATIVES

R P ed r u ice ct io n

Combining the qualities and expertise you should expect from an industry supplier

2008 IBS Yard Barn Wall Panel Line

$24,900 FOB MI

Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI

2005 Robbins No-Rail Gantry 14'x180' trackless gantry with aisles. Includes (2) gantry heads, (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive. System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 440v, 3phase. Seller is willing to sub-divide this system. $79,000 NOW $69,000 FOB TX

2004 Ruvo 925 Door Machine Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA

R P ed r u ice ct io n

2005 (8) Projector SL Laser System Eight-projector system with two computers, model SL 4002-05 GBPU, Pro director 4. Includes cables and consoles. 20' projection area per head, green lasers. Software license required.

Klaisler Finish Roller Press

$62,600 :: FOB AZ Condition: Good

Unit refurbished in 2002 and a new, OEM roll by Klaisler, added in 2003. Features two 5 HP motors with a frequency drive, two 18 inch diameter rolls, 14 foot wide throat, push button controls, emergency stop, safety bars and limit switches. 440 volt, 3 phase electrical. $8,700 NOW 5,900 FOB MN.

Fax: 765-288-9991 PHONE: 800-289-5627

www.woodtrusssystems.com

Phone: 765.751.9990

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

November 11th, 2011 #04120

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Page #17

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier R P ed r u ice ct io n

$9,900 FOB CA

2004 Hain 60 Ft xMeasuring System 1990 Tee-Lok Finish Roller Press Tee-Lok finish press with 24” diameter rolls, (2) 5 HP motors, panic bars, push button controls and infeed idler rollers. 230/460 volt, 3 phase.

2005 Koskovich Auto Omni $52,900 FOB UT

NOW $49,900

$4,900 FOB MN

Hain Company measuring device model MEA, 1/4 HP electrical linear actuator unit with steel stops and pusher, 60 foot long, measures lengths in feet, inches and fractions of an inch. Includes conveyor with legs and 2" x 4" x 1/4" aluminum extrusion. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. 110 volt electrical.

2005 MiTek Roof Tracker System 14' x 84' trackless side-eject gantry. Includes (11) 6'-4" x 14' slotted, 3/4" steel-top tables with ejectors. Includes one (1) model 63750-501 RoofTracker gantry head with a 24" dia. X 14' roll w/joy-stick control. System includes all airmanifold, overhead tracked electrical system, limited jigging hardware, bridge-plates, two (2) parking sections. 460V, 3 ph power.

$79,900 FOB OH

1999 Sterling Tractor



Klaisler End-Eject Gantry System Klaisler end-eject gantry, professionally refurbished in 2002, 61’ working length, light duty since the refurbishing. Includes (10) 56” wide tables with end-eject, pop-up ejector rollers and 30” steel bottom chord, drilled and tapped, with plastic above. Includes (1) 18” diameter gantry head with (2) 5 HP motors and (1) Klaisler finish press, 18” diameter rolls, 230/460 volt, 3 phase electrical.

$19,900 FOB MN

Fax: 765-288-9991 PHONE: 800-289-5627

1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5" tires, 180,000 miles, 8LL transmission and passed DOT inspection

www.woodtrusssystems.com

$11,900 :: FOB CO

Phone: 765.751.9990

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

TRAILERS

TRUCKS

TRAILERS

800-382-0329 1997 Ford Truck with 2002 PM Knuckle Boom Crane

1997 Ford LTL A9000 Truck -Engine: Series 60 Detroit 430 HP -12,000 LB Steer Axle -40,000 LB Rockwell Differentials 3:58 Gears -Transmission: 10 Speed RTLO 15610B -New Paint

$49,900 FOB ND

2007 Komatsu FG45T-8 Forklift 8,870 Lb Capacity, Dual Fuel, 1199 Hours Optional Fork Extensions are Available. $27,800 FOB LA Wasserman & Associates 800-382-0329

PM Crane Model 14024 -Dual Side Controls -40'-8" Reach -400 Degree Rack & Pinion Rotation -Check Valves on All Cylinders -Overload Relief Valves -Hydraulic Load Limit Device -Dual Outriggers w/19'-8" Span -New Paint



1999 Volvo Truck with National 500D Crane



270 Cummins Engine with 111,000 Miles 2,939 Hours on National Crane, New Paint on National Crane & Truck Frame. Tires are 90% . $65,000 NOW $45,000 FOB ND Wasserman & Associates 800-382-0329

JobLine.com, inc.

TRAILERS

The

800-289-JOBS

R P ed r u ice ct io n

Page #18

R P ed r u ice ct io n

TRUCKS

November 11th, 2011 #04120

01 Haulin (Stretch 48 -70 )

2004 Pratt 48' Roll-Off Trailer

1990 Wabash 48’-72’ Stretch Roll-Off Trailer Slanted Profile $6,500 NOW $4,000 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Time To Hire? We’re here when you need help!

www.thejobline.com

We go to any lengths to expand your opportunity. PHONE: 800-289-5627

-Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com

$8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust. Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430

You find the opportunity -- we’ll build you the products to meet it. Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #19

TRUCKS & TRAILERS

MAKE AN OFFER!

800-382-0329 WASSERMAN TRAILER VALUES WILL GET YOU ROLLING NOW!

R P ed r u ice ct io n

(manufactured 12/19/05) MD 06 Ultralight Weight / Vin 1P9GR36226F554005 / 20k Axle / 25,900k GVWR. Electric / brakes 90% / Tires 90%. FOB LA Salter & Associates 770.434.1006

2000 Raglan Trailer 48’ 48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 888.288.9874

2006 Iron Steer 30' Gooseneck Roll-Off Trailer -12,000 LB Dexter Tandem Axles (8 Wheels) -Electric over Hydraulic Bed Tilt -Electric Brakes

-Split Rollers with Roller Locks -Manual Roller Brakes on 5 Rollers -DOT is Current

$13,900 FOB IN

2008 Precision 42-60' Stretch Roll-Off Trailer (4001c) Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

2005 Pratt 48'-70' Stretch Roll-Off Trailer R P ed r u ice ct io n

2005 36’ gooseneck tilt trailer Includes in-bed hitch

$19,900 FOB AZ

1994 Wabash T-30 Trailer 2005 Pratt 36'-50' Stretch Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck

-Sliding Tandems -Hydraulic Neck Location: AZ Price: $17,900.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 888.288.9874

2004 Moffett M5500 Piggyback Lift with 2002 Great Dane 42' Flatbed Trailer

Reconditioned JDH Trussmaster 48'-70' Stretch Roll-Off Trailer -Sliding Tandems

-Hydraulic Neck -Repaired & Repainted in September 2011 -Very Good Condition (FOB ND) $19,000 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

GET RESULTS ! WITH THE

ADVERTISER PHONE: 800-289-5627

Kubota Diesel, 5500 Lb Capacity, 10' Mast, 1000 Hours, Pallet Forks, Side Shift, Tilt, Serviced w/50% Tires. 2002 Great Dane 42' Flatbed, 42' x 96", Headboard, Toolbox, Winches and Straps, Aluminum Wheels, DOT Inspected, Moffett Mount Kit. $22,500 FOB OH.

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

November 11th, 2011 #04120

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

MISC.

Page #20

MISC.

Wood Truss Systems

Toll Free: 888.288.9874

inc.

R P ed r u ice ct io n

MANUFACTURERS’ REPRESENTATIVES

800-382-0329

Combining the qualities and expertise you should expect from an industry supplier



2006 Omni Miser Automated Material Picking System $89,000 FOB SD

-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000! Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner! Click for WoodRunner Details: http://apexmw.com/

Wood Truss Systems inc.

2005 Williams Pulverizer Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.

$8,000 FOB TN

Toll Free: 888.288.9874

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

Ingersoll-Rand Rotary Screw Compressor with Dryer Condition: Good Ingersoll-Rand rotary screw air compressor, model UP6-15c-125 with a Domnick Hunter DRD100 dryer. Compressor features a 15 HP motor with a maximum pressure of 125 PSI and 3 ph power. Dryer features a 3/4 HP motor, 115v, and single phase power.

1987 Jager TTS Auto Lumber Stacker $14,900 FOB NB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Price: $4,495 :: FOB SC

MiTek Peak-up Stackers (Qty. 3) HD Drive System, Auto Indexing, spring assisted receiver arms, holds up to 30 trusses from 16’ to 60’ in length with 40 sec. average cycle time. Quantity of 3, price is per unit.

$15,900 ea | FOB MI PHONE: 800-289-5627

2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2003 Virtek LPS-6R Laser System (2) System #2: Virtek truss projection system, quantity of nine (9) model LPS-6R redlaser heads, with 16' coverage each (144' @ 16'+ projector height), system PC. Heads are currently under power and have been under OEM maintenance agreement since new, Windows 2000 PRO O/S, Virtek TrussLine version 4.4/1.118. Virtek license agreement required, Virtek maintenance agreement suggested (call for additional cost estimates). $61,195 FOB OH Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

TELL THEM YOU SAW IT IN THE

ADVERTISER

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Truss Repair and Replacement Christina Huerta - Friday, November 04, 2011 Recently, I heard a story about a homeowner needing to repair a truss on an older home. For anyone that is not familiar with what a truss is – A truss is a major part of the framework of a house. Trusses are constructed from wood or metal, such as steel. The trusses are designed and engineered to withstand the weight of the roof along with other forces such as wind. After hearing the homeowner’s story, I decided to Google “truss repair and replace.” The search results were scarce but honestly, I was pleased to find that there are only professional contractor results on the subject. In an age where you can virtually learn to repair anything online from dishwashers to cars, there are still some things that should be left to the more-experienced. For several reasons, there is a major safety precaution that comes with this particular home repair – Retrofitting trusses is the most dangerous aspect of home construction. In addition, to complete this task, you need to have an engineer seal any truss repair or replacement and a truss contractor would need to properly replace or repair a truss. If you have an older home and your home builder or contractor is no longer in existence, you can look at the actual truss to find the truss plant’s name and/or logo marking to determine if they are still in business, and you can begin the repair or replacement process by contacting the truss plant. Repairing or replacing trusses in a home ranks high as a task that should be left to a professional contractor. To locate a local truss contractor in your area, I would suggest conducting an organic search on Google and/or reviewing websites such as www.contractortalk.com. Christina Huerta

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

Page #21

bargain basement

Priced to move - offers welcome Three (yes 3) Idaco Componamatic Saws plus One (1) Speed Cut Parts Saw Location: IL Price: $5,250.00 For All 3 Componamatics -2 Working Saws, One Parts Saw -2 Scrap Conveyors

12 7 Manual Component Saws - $7,500 & Under $6,900 - FOB NE - 1989 TimberMill 6-20 Component Saw $7,500 - FOB NE - 1995 Clary Master 5 Blade Component Saw $7,250 - FOB AB - 1990 TimberMill 6-20 Component Saw $7,000 - FOB AZ - Mid-90’s Mitek Easy Set 1000 Five Blade Component Saw $5,500 - FOB MI - 1992 Mitek Easy Set 2000 Five Blade Component Saw $5,000 - FOB VA - Clary 4 Blade Component Saw $4,900 - FOB MT - Idaco Componamatic 4 Blade Component Saw

3 Used Lumber Splicers - $2,000 & Under (OH, IL & IA) Used Tee-Lok 14’ x 78’ End Eject Roller Gantry System Location: MI Price: $19,900.00 NOW $16,900 Tee-Lok 14’ Roller Gantry (Track Mounted) (10) 6’ x 14’ Tables with Pop-up Roller Conveyor (For End Eject) Roof Truss Jig Hardware Tee-Lok 14’ Finish Roller Add $4,000 $3,500 for 2nd Tee-Lok 14’ Roller Gantry Add $5,000 $4,250 for 2nd PE & E 14’ Finish Roller Used Stair Clamp - FOB NE - $1,500 -Hydraulic Clamping - 240 Volt / 3/4 HP / 4 Amp Motor -(8) 9” High Side Clamps - 148” Frame Length - 34” to 50” Clamp Width NEW Wind Brace Saw for Wall Panel Metal Brace - FOB NE - $950 Used Idaco Webmatic 4 Blade Web Saw FOB: MN - $9,900.00 NOW $7,500 -Manual Angulation -16’ Capacity Waste Conveyor & Short Incline Conveyor to Adjacent Saw - 480 Volt/3 Phase Add $4,000 for 22’ Live Deck with 7’ Skatewheel Conveyor Extension Used Full House Assembler FOB: OK - $1,900.00 Assemble Interior & Exterior Doors & Jambs Height: Up to 8’-0” - Width: 1’-0” to 8’-0” -Excludes Staple Guns

TELL THEM YOU SAW IT IN THE

ADVERTISER PHONE: 800-289-5627

Toll Free: 800-382-0329

www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Wood Truss Systems

Toll Free: 888.288.9874

inc.

MANUFACTURERS’ REPRESENTATIVES

November 11th, 2011 #04120

Combining the qualities and expertise you should expect from an industry supplier

Page #22

MISC.



NEW SnoVantage Skidsteer Snow Plow

WoodRunner by Apex Machine Works $114,900 FOB MN

Wing Span Open: 20', Closed: 9 1/2' . Center Section: 7 1/2'. Wings: 6' . Front Skin: 10 Gauge. Rear Structure: 1/4" & 5/16". Aeroquip Hydraulics. $8,500 Retail, Now $6,000 FOB ND. NOW $5,000 Wasserman & Associates 800-382-0329

McGlaghlan EX-50 Lumber Carousel

The WoodRunner is a revolutionary step forward in automated lumber retrieval systems. As a totally automated system, the WoodRunner eliminates the costs and limitations associated with manulally fed saws. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Mizer, Alpine's ALS and other linear saws. Click on the photo for additional images, a brief VIDEO, or to download a Brochure and a footprint layout for Wood Runner Miser Specs or Wood Runner Alpine ALS Specs.

MISC.

Model EX-50 Expediter, lumber carousel, seven (7) station, nominal 50 foot diameter, material handling system with track. Maximum bunk length 20'. Includes toggle controls and 5 HP, hydraulic drive motor. 240 volt, 3 phase electrical. $8,900 FOB TX. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

MISC.

2003 Virtek LPS-6R Laser System (1)

2005 Kaeser ASD-25 Compressor, Dryer & Tank 1999 Holz-Her Accura "S" 14' Beam Saw Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329

PHONE: 800-289-5627

Kaeser screw type compressor model ASD 25, serial #100618-10001 with a 25 HP motor, belt drive and digital controls, along with a Kaeser dryer model KAD-115. Includes one large storage tank. $6,500 FOB TN. Wood Truss Systems 888.288.9874

McGlaghlan EX-30 Lumber Carousel Model EX-30 Expediter, lumber carousel, seven (7) station, nominal 30 foot diameter, material handling system with track. Maximum bunk length 16'. Includes toggle controls and 5 HP, hydraulic drive motor. 240 volt, 3 phase electrical. $7,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

System #1: Virtek truss projection system, quantity Ten (10) model LPS-6R red-laser heads, with 16' coverage each (160' @ 16'+ projector height), with system PC. Heads are currently under power and have been under OEM maintenance agreement since new (one head non-operational), Windows 2000 PRO O/S, Virtek TrussLine version 4.4/1.118. Virtek license agreement required, Virtek maintenance agreement agreement suggested (call for additional cost estimates). $67,988 FOB OH. Wood Truss Systems 888.288.9874

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the Adverti$er

Toll Free: 888.288.9874

inc.

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

Refurbished 2005 Hain 20Ft. Measuring System

$5,900 FOB CA 2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical.

MISC.

Page #23

MISC. Hain Powered Measuring Systems -20' Hain Measuring System with Conveyor & Stands (No Infeed Conveyor) -15' Hain Measuring System with Infeed & Outfeed Conveyor & Stands $2,900 EA FOB NE Wasserman & Associates 800-382-0329

Like New Altman Model 122 Dustless Sheetrock Saw Call for Price. FOB NE. Wasserman & Associates 800-382-0329

Virtek Laser Projection Heads

2000 Virtek Truss Laser Projection System 8Fixed Red Laser heads Model LPS-2DI Computer (No Enclosure) 14’ x 112’ Projection Area. $45,000 FOB MN. $39,900 NOW $36,000 Wasserman & Associates 800-382-0329

GET RESULTS ! WITH THE

ADVERTISER PHONE: 800-289-5627

NEW Monet DeSauw Wood Finger Jointing Line

Norfield 1020 Double-End Trim Saw Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 888.288.9874

Door & Stair Equipment

2001 Norfield Signature Series Magnum Door Machine QUANTITY ten (10) red-laser heads (only) for up to 140 ft. projection @ 16' ceiling ht. Heads are model LPS-2D that were under OEM maintenance agreement since installation. Virtek license agreement required, OEM inspection required to obtain continuing maintenance agreement and installation. Contact us for serial number history per OEM records. $39,900 FOB IN. Wood Truss Systems 888.288.9874

Door & Stair Equipment

R P ed r u ice ct io n

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Wood Truss Systems

November 11th, 2011 #04120

Includes Nasco Model WP-539 Auto Feed Screwdriver & 2 Routers. $19,900 FOB AZ NOW $16,900 Wasserman & Associates 800-382-0329

Reconditioned 1999 Norfield 3800 LRO Door Lite Machine Window Lite Cutting, Cylinder Lock Boring, Latch Drilling, Faceplate Routing, Overhead Template. $12,500 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Cut-Off/Shaper Unit. 5 HP Saw to CutOff Angles. 25 HP Cutter Head to Shape/ Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp.

800-382-0329

Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada. Advantages: -Reduce Waste -Positive Ecological Impact -Produce Straight Material $79,900 FOB MO Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1985 Norfield Magnum II Door Machine $9,900 NOW $8,500 FOB AZ

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

hiring Zone - Help Wanted

Hiring is easier in the Advertiser’s Hiring Zone Yes, I am a recruiter but there is a place and time for recruiting and also a place for companies to advertise openings directly to candidates with N O R ECRUITING FEES!

November 11th, 2011 #04120 Page #24

hiring Zone - seeking employment

Post Your Seeking Employment Ad in the Advertiser’s Hiring Zone

NEW SERVICE Available NOW!

As a weekly publication, the Advertiser is your best and most economical option for hiring when confidentiality is not an issue.

Yes, I am a recruiter but there is a place and time for recruiting and also a place for candidates seeking employment to openly advertise their availability.

We have hundreds of potential candidates who are Advertiser Subscribers. By placing your ad in the Recruiter Free Zone, you can DIY, avoiding recruiting fees.

As a weekly publication, the Advertiser is your best and most economical option for your job search when confidentiality is not an issue.

Standard Help Wanted ads that are about the size of this notice will cost you $99.95 a month.

We have hundreds of potential employers who are Advertiser Subscribers. By placing your ad in the Recruiter Free Zone, you can be hired without recruiting fees.

For additional information contact.

Thomas McAnally - Publisher 800-289-5627 tmcanally@componentadvertiser.com

Your Employment Ad Could SHOULD be Here

Standard Seeking Employment ads that are about the size of this notice will cost you $49.95 a month. For additional information contact.

Thomas McAnally - Publisher 800-289-5627 tmcanally@componentadvertiser.com

Avoid Recruiting Fees Advertise Direct PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #25

Available candidates

JobLine.com, inc.

The

800-289-JOBS

Time To Hire? Weâ&#x20AC;&#x2122;re here when you need help!

www.thejobline.com These and additional candidates are available through theJobLine. com, Inc. All inquiries are strictly confidential. Fees are contingency based and only due if you hire or engage a candidate we present. Low cost, flat rate fees quoted upon request. Contact Thomas McAnally thom@thejobline.com www.thejobline.com 800-289-5627 x 1

Multifamily Designer/Design or Plant Manager - Truss/Panel Supervise wood truss design/ pricing department for single, multifamily, and commercial construction for a $28 million plant. Perform recruiting, training and management of design staff. Complete design and engineering of complex truss systems. Develop design department procedures, training program, and methods to measure productivity for all of the Eastern Division plants. Assisted with training new Managers in company procedures. Prior experience as Plant Manager & Production Manager of truss & panel plants, 25+ production workers. MiTek, eFrame, PanelBuilder advanced user, CAD, Excel, too. Compensation: $55k+ Relocation: USA - ALL States ID: C11051

PHONE: 800-289-5627

Senior Designer - Truss/Panel/ Wood or Steel

Designer/Design Manager Truss/Panel/EWP/I-Joist

As a production designer I produce between $200,000 - $300,000 per month in cold form steel roof truss designs, mostly commercial projects. As a designer the majority of my projects are being built in the pacific northwest and military projects in California, shipped from our facility in Colorado. Contact the customer: Many of my projects are "design/build", extensive contact with Architects and Engineers is required to problem solve engineered truss to bearing connections, progressive collapse systems, seismic/ lateral loading, misc material (ridge angle, eave angle etc) Design: Ensure that my designs are accurate, efficient, cost effective. Utilizing CAD, ensure that all truss to truss, truss to bearing, misc materials, truss placement, cross sections, any special connection details are accurate and clearly drawn to scale for approval/ field use. Ensure all details are clearly marked on the shop drawings as my production packs are presented to the shop for fabrication. Documentation: Build a library of reference material, blanket seals, truss to truss connections etc. Log any and all RFI's required for any project I'm working on. If this is the job you need done, Candidate is asking upper $40's to $50's

Design Manager: Supervised 6 designer. Utilized MiTek Sapphire, 20/20, MBA, EFrame and OptiFrame as well as GP I-Joist programs. Design commercial, tract and custom projects for quotation and sales. Produced shop drawings for production. Utilized MiTek Sapphire Structure, MiTek 20/20, MiTek MBA and joist/beam calc programs. Worked closely with sales force and customers to produce best design possible. Compensation: $50's

Relocation: CO, USA - Western ID: C11592

Senior Designer/ Design Manager/Estimator/Inside & Outside Sales - Truss JobLine Certified Senior Designer. Candidate has 17 years industry experience and 17 years experience in this position. Products include floor trusses, roof trusses, and I-Joists. Markets include tract, single family, custom, high end, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, scheduling, repairs, customer service, inside sales, field measurements, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes Alpine, MiTek, and AutoCAD. Education: High School Graduate and Bachelors degree in Math (Strong Trig/ Math skills) Compensation desired: Salary $40k+ Relocation: FL, GA, KY, USA - South, TN, NC, SC, WV ID: C10145

Relocation: USA - ALL States ID: C11005

JL Senior Designer(5) Design Manager Truss/Single & Multi Family 17 years design experience. 14 in Multi Family. Estimate, design, and engineer roof and floor truss systems for Multifamily, Commercial and Agricultural truss systems. Prepare shop drawings for production. Provide customer support, troubleshooting, and design solutions. Current software experience: MiTek, TJ Beam, Simpson, Word, Excel.WTCA certified. Compensation: 50k Thom's Notes: Candidate scored in our Senior Designer range! Top 5% nationwide. Perfect skills curve. No deficiencies. Relocation: KS, TX, OK, CO, USA - Southwest, IA, LA, MO, NE, NM, ND, SD, AZ, USA - South, UT, USA Western, WY ID: C11016

Senior Designer/Outside Sales,Estimator - Truss/I-Joist/ EWP 20+ years experience as a Designer/Senior Designer. Primary duties: design, layout, optimization, and takeoff. Secondary duties: customer service and field measurements. Software used: MiTek, OptiFrame, Alpine, AutoCAD, Soft Plan, Robbins. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware. Market experience includes single family custom, multi-family, and light commercial. My volume was varied depending on projects. Also involved in Outside Sales. Compensation: $48k+ JobLine Notes: JobLine Certified Senior Designer - Advanced Level Relocation: IL, IN, OK, TN, TX ID: C10536

Senior Designer/Design Manager/Outside Sales - I-Joist/ EWP/Glue Lam/Open Web 10 years EWP experience. Over saw all of the designs of EWP sold in the Dallas/ Fort Worth, Houston, San Antonio, Austin and South Texas region. Oversaw a team of 5 designers. Trade show experiences, Supported outside sales to close the deals. Software: AutoCAD, BC Framer, TJ Beam, TrusPlus, Excel, I-Joist software. In addition to "10 years experience w i t h Tr u s J o i s t s , B o i s e , L o u i s i a n a Pacific,Roseburg, TrusWal, GatorJoist and SpaceJoist, I have extensive knowledge of glulams. I have also trained others and checked other designer's work as a Design Manager roles." I also have outside sale experience, along with product knowledge to Builders and Code officials. Compensation: $45-50k Relocation: KS, OK, TX ID: C11594

Designer/Design Manager Truss (wood & steel) 10 years experience. Assist design manager in everyday accountability for architectural and truss design department for a home builder / truss company. Train and assist beginning and junior designers with questions and design issues. Responsible for producing accurate construction and truss design drawings. Design and estimate wood roof and floor truss systems for multi-family, commercial, residential, and custom homes. Work closely with architectural firms, engineering firms and general contractors to resolve issues and concerns of client or company. Job site inspection for code compliance. Service customer accounts on a daily basis. Products: Roof & floor trusses, wood & LGS, lumber and hardware. Software: MiTek, Alpine, AutoCAD, Excel, Word Compensation: $50k+Relocation: TX, AR, FL, NC, OK, TN ID: C10723

Senior Designer/Design Manager - Truss/Panel/I-Joist/ EWP 20 years experience designing roof & floor trusses, wall panels, I-Joists, and EWP. Supervised 5 designers, customer service, optimizing, and quotes. MiTek, OptiFrame, Robbins, TJ Beam, Truswal and Microsoft Office. Compensation: $60k+- opportunity JobLine certified Senior Designer, 5/5 overall ranking. Relocation: USA - ALL States, AB, Canada - Western/Central, Canada Eastern ID: C11256

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #26

Available candidates Design/Sales/Management - Truss/Panel/I-Joist/EWP/ Installed Sales

Senior Estimator/Estimating Manager - Truss/Whole House/ Framing Package

General Manager - Truss/Panel/ Lumber/ Doors/Windows/ Cabinets/ EWP/I-Joists

Senior Designer/Technical Outside Sales - Truss/Panel/ EWP/Installed Services

Single/Multi-Family Engineered Component Sales. Responsible for a sales region which covers the Southeastern areas of North Carolina and the Myrtle Beach area of South Carolina. I service singlefamily, multi-family, and commercial contractors. I also work with local building supply companies in order to provide them a link to component sales. I am responsible for making contact and then building and maintaining relationships with these contractors and building supply companies. I am responsible for the estimating and preliminary design of all projects I come in contact with, utilizing the design software. While developing relationships with the surrounding building supply companies and G.C.'s, I am able to provide engineered components, Wall panels and I-Joists/LVL's; all of which I have at least 10 years of design experience. With experience in almost all aspects of the Engineered Component industry, I've found that I truly excel within the Sales and/or Sales Management areas.

6 years estimating experience. 4 with MiTek 20/20 and 2 with eFrame. Markets include Single Family Custom, Tract, Light Commercial and Multi Family. Products include component framing packages and total project estimating. Prepares hard construction estimates by means of manual and computerized takeoff methods. Extensive MiTek/Excel experience. Supervises monthly inventory audits for all truss department materials. Maintains records for all received and processed quotes. Pre-engineers all plans for difficulty and profitability. Participates in cost studies to enure a correct labor and pricing strategy. Compensation $50k+ Relocation: AL, FL, GA, MS, TN ID: C10580 General/Location/Regional Manager - Truss/Panel/EWP Currently has P&L responsibility for floor and roof truss plant mostly building tract and single family custom. Also distributes EWP. All departments report to the candidate with oversight by a corporate sales manager for the sales staff only. Has managed two shifts with 100 +/- employees at the $13,000,000 to $16,000,000 level. Prior industry experience includes EWP Division Manager, Technical Sales Representative, and EWP Designer. Is also an experienced framer/framing foreman. Education: Associates degree. Has a working knowledge of, but is not currently proficient in AutoCAD, TJ Epert, MiTek 20/20 and eFrame. Compensation: Negotiable. Relocation: AL, CT, DE, GA, IN, KY, LA, ME, MD, MA, MI, MN, NH, NJ, NY, NC, OH, RI, SC, VT, WV, PA, TX, WI, USA - ALL States, AZ, CO, FL, IL, MT, NE, NV, VA, WA, DC ID: C10241

Oversee all aspects of the manufacturing plant (made trusses, floor trusses and wall panels). HR— Shipping — Sales— Budget control — safety —- design — ordering. Did 2 start ups for this company and travel to many of their component plants to help get cost and budget under control. Also work with redesigning the flow of some of these plants. My last year traveled to a lot of the plants to set up new policy for them. Areas of experience: Inventory control, ordering of raw goods, hiring and firing. Working with Sales, Engineering, and Converting, Shipping and Receiving along with working closely with the owners. Running the plant --- the only thing I really don't get to involved with is sales --- the CEO handles the sales team. Compensation: $80's Relocation: AL, AZ, CO, FL, GA, HI, IN, KY, MS, NM, NC, OH, SC, TN, TX, VA, WV ID: C11686

20 years Technical Sales & Design experience, 2 as Design Manager. Roof truss, floor truss, wall panels, EWP, component framing package, I-Joist and installed services experience. Current with MiTek 20/20, eFrame, TJ Expert, AutoCAD software. Single/multi family, light commercial, tract markets. Sold $5mm in truss and panels, provided estimates, designed plans, scheduling and customer service. Compensation: Low $60's+

Relocation: AL, FL, GA, LA, SC, TN ID: C11728

Senior Designer/Design Manager - Truss/Panel JobLine Certified Senior Designer (Top 2%). Candidate has 12 years industry experience and 12 years experience in this position. Products include floor trusses, roof trusses, wall panels, and hardware. Markets include tract, single family, custom, high end, and light commercial. Primary duties include design, layout, optimization, and cutting/production documents. Secondary duties include checking others work, customer service, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, OptiFrame, GenericCAD, and TJ Expert. Training received includes WTCA Level 1, 2, 3, MiTek 20/20 & Engineering Principles.. Compensation desired: $70 to $75 Relocation: WI, IL, MN ID: C10019

Design Manager/Sr. Designer/ PE - Truss/Panel/EWP 30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open?? Thom's Notes: PE with Mid Atlantic seals Relocation: USA - South ID: C10897

PHONE: 800-289-5627

Senior (ACE) Designer/ Estimating/Outside Sales Truss/EWP 6 years experience: facilitated the truss sale, design, & delivery for lumber salesmen lacking truss experience. Developed own customer base by selling trusses. Design layouts of floor and roof truss systems for multifamily/commercial projects. Proficient use of MiTek Engineering, eFrame, AutoCAD, TJBeam, and Excel programs. Compensation: $60's One of our top 1% ACE's Relocation: TX ID: C11427

Designer - Truss 30+ years truss design. Stable, MiTek, Roof & Floor Trusses. Compensation: $45k+ Relocation: NC ID: C11692

Senior Designer - Truss/Panel/ EWP/I-Joist/Framing Package Candidate has 15 years industry experience, 4-5 years experience in this position, and 10 years in subordinate positions leading to this position. Products include floor trusses, roof trusses, wall panels, I-Joists, EWP, hardware, and complete framing packages. Markets include tract, single family, single family custom, multi-family, and light commercial. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, customer service, inside sales, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, TJ Expert, AutoCAD, and I am willing to learn new software. Compensation desired: $45k+. Motivating factors: advancement, compensation, benefits, job security. Relocation: CA, CO, TN, WA ID: C10199

Designer/Design Manager Truss/I-Joist/EWP/Packages 35 years experience. Supervision of staff designers, training and coaching design team, checking work for accuracy, estimating and quote preparation, promoting sales with technical assistance, using Mitek software for advanced truss designing and Mitek MBA for creating and enhancing useful reports, using MS Word, MS Excell, MS Outlook, problem solving and field trouble shooting, communicating repair details.Compensation: $65k+ package Relocation: FL, GA ID: C11671

Relocation: TN ID: C10710

Senior Designer(JL) Truss/Multifamily 10+ years industry experience as senior truss designer. Software: 10 years Mitek, 1 year Truswal, MS Office, TJI Beam, Autocad Lt, Simpson, & USP. Primary duties: estimating, layout, engineering, & job costing of roof, floor, & ewp components. Secondary duties: checking others work, field visits, field measures, customer meetings, repairs, & customer service on a daily basis with contractors, engineers, architects, & builders to resolve design issues from project conception to completion. Go to guy for complex commercial & residential applications. Associates Structural Engineering. WTCA Level III. Thom's Notes: JobLine Tested at Senior Designer Level 94% only used Jobber calculator. Relocation: WI ID: C11282

Production Mgr/Supervisor Floor Truss/Wall Panel Set up of work to production employees, batch, distribute, manage jobs to be cut and built for on time delivery.Perform weekly payroll, hire of new employees. set up and purchase lumber and other necessary stock for production. oversee maintenance of all equipment including the repair. Compensation: $50's Relocation: IL, IN, IA, WI ID: C10942

New Candidates and more on www.thejobline.com W E A L S O H AV E WORK FROM HOME CONTRACT DESIGNERS available NOW!

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #27

Job Opportunities

JobLine.com, inc.

The

800-289-JOBS

Time To Hire? We’re here when you need help!

www.thejobline.com Designer - Truss/Panel ID: J10455 Priority: Immediate Search Location: Southern Ontario Canada We are looking for Designers with a great attitude to join our growing team. We offer a terrific opportunity and the flexibility to achieve your personal and career goals with a competitive remuneration and benefits package The successful candidate will possess: - Strong knowledge of and hands on experience using MITEK E-Frame design software. Experience with MITEK version 7.25 would be an asset. - A minimum of 3 years of work related experience in either truss, wall or floor design. Experience in all areas of truss, wall or floor design would be an asset. - Strong attention to detail and the ability to work in a fast paced environment - Excellent professional work ethics - Strong communication and organizational skills - Verifiable professional references Canadian Citizens with the required experience are urged to apply. US Candidates will need to have a 2 year degree in an architectural, design, or engineering field and a minimum of 3 years experience as a Truss or Panel Designer to be eligible. The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Catch us on

thejobline.com PHONE: 800-289-5627

Design Manager Truss/EWP/MiTek

Designer/Senior Designer Truss/Panel/I-Joist

Sales/Plant/Design/Estimating Manager

New opening for a seasoned Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities.. The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family. Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region. Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here. Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program.

Opportunity for a high energy designer who is willing to learn and apply all aspects of truss, panel, I-Joist, and EWP design. Experience required: 5+ years in component design plus JobLine skills evaluation above average. Primary duties include design, layout, optimization, and cutting/ production documents. Secondary duties include customer service. Skills required include MiTek software, AutoCAD, will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, framing components, I-joists, EWP, hardware. Compensation: Salary from $45-75 CN depending upon experience and performance. Relocation is open to negotiation. Other considerations include local lifestyle - metropolitan, expected commute time to be 15 min, outdoor activities - sports, hunting/fishing, crime - low, cost of living - medium, housing affordable, schools - above average, college/ university nearby, a Non-Smoking facility, and EOE (Equal Opportunity Employer). Thom's Notes: Employer has an LMO in hand so no NAFTA requirements apply. US Citizens are urged to apply. J10459

Are you a multi-tasker with the ability to grow sales, lead design, and manage operations for a plant that has potential to produce $20M? The job requires someone who has experience with total takeoff, design/layout/engineering using MiTek software, manufacturing operations, and managing multiple department while focusing on growing sales. The ideal candidate will have either been a GM or past owner, who came up through the business in manufacturing, design or sales. If this is a possible match for what you are looking for, let's talk! The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Thom's Notes: US Candidates must have a minimum of a two year degree in a drafting/ design or cad related field and 3 years experience in the job to be considered. J10452

IMMEDIATE! 2-3 Truss Designers Needed in TEXAS

NOW!

Call for Details STRICTLY CONFIDENTIAL! ID: J10466

Senior Designer - Truss Location: Alberta Canada Opening is for a floor and roof truss & I-Joist designer who has experience with MiTek and Keymark software. Experienced with everything from single family tract to high end cut up customs, light commercial and multi family projects is preferred. Senior designer rating by JobLine is preferred. Minimum of 3 years experience is required as is a 2 year degree in a design or engineering related program if you are a US citizen looking to work in Canada under the NAFTA program. Compensation: $55-65k+- based on fit. Relocation assistance is negotiable. Thom's View: If you are looking for a peaceful and value driven community to raise your kids, with very low crime, this is a perfect location. Neighbors know each other, parents know the teachers and who their kids associate with, and the overall social value is high. Churches are welcome, charities are active, and outdoor activities are abundant, year round.

ID: J10468

Senior Designer Truss/Multifamily Location: Southeast Senior Designer. Experience required: 4+ years industry experience. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, customer service, and field measurements. Skills required include MiTek, Intelligent Building Systems, software, AutoCAD. Components include: floor and roof trusses, and wall panels. Markets: Multifamily and light commercial. Compensation Salary, base pay from $50's to $60k+- depending upon experience. Company size is location size is $10 to $15 million. Relocation is acceptable with reasonable expenses paid and open to negotiation. Thom's Notes: This is one of few openings, so screening will be very tight for the right person. Relocation is a possibility, but not if costs are too high or logistics too complicated. The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

@JobLine

TOP PICK! Senior Designer - Truss This opportunity is for a specific type of Truss Designer. If you have scored in the Senior Designer or upper levels on the JobLine Design Skills Evaluation using ONLY a calculator, in what we consider a very fast completion time, your skills are perfect for this position. If you are knowledgeable in designing high end, complex projects that are detailed and require exceptional ability, and thrive on challenges and are willing to learn new approaches, this may be what you have been looking for. The company will invest in your training, both initially and ongoing to keep your skills at peak performance. Because of that, no job hoppers will be considered. We have specific instructions on what type of candidate they will accept, and we will be closely screening candidates for this opportunity. This is the perfect chance for someone who is topped out at their current employer to move up in responsibility and compensation. Priority is for currently employed superstars, but if you were laid off and have been a top performing Senior Designer in the past 1-2 years, don't pass this one up. Compensation: Starting salary is open, but expect to show your abilities before you get top compensation. Designers at the level we need for this position can make in the $70's and more, based on performance. That is 2011 numbers, not back in the good olé days. Benefits include: Medical, Dental, Vision, 401K and/or other retirement programs. Relocation is acceptable and expenses are open to negotiation for the right candidate. The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

November 11th, 2011 #04120

Don’t Forget! You Saw it in the Adverti$er

Page #28

Used Equipment Wanted!

888.288.9874

Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329

Take Back Your Business Become More Competitive with:

x x x

Powerful Software High Quality Connector Plates Independent Established Supplier

All at a Great Price

For a software demonstration call 1-800-652-6050 www.keymark.com

www.wasserman-associates.com

Job Opportunities

Outside Sales - Multi Family

Outside Sales - Truss\Panel\EWP Location: Greenville, SC

ID: J10267 Location: Northeast Employer is seeking a high performance Multi Family Sales Professional to join their team. Great company! If you currently have $5-10mm in business, or have $3-5 and want to grow your client base, look closer at this opportunity. No relocation. Must be currently in the Northeast/Mid Atlantic market with a book of clients. Compensation: $70's to 200k+ potential, plus expenses for the right candidate. The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Products include walls, EWP, and trusses for Single family custom, multi family and light commercial. Experience with this broader range of products is not a pre-requisite, but it is preferred. Compensation: Salary and commission package for past salesman in the six figures range but not guaranteed... Base plus commission. Benefits include Health Insurance and 401k programs. Thom's Notes: Local candidates are required with experience in the Columbia South Carolina and surrounding markets. No relocation. ID: J10469 The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Unmatched Quality • Engineered Design • Structurally Superior

Call 573.437.4848 for your FREE SAMPLE, or visit www.trimfitllc.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Safety First!

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

Page #29

La seguridad en las escaleras

La seguridad en las escaleras de mano comienza con la selección de la escalera adecuada para el trabajo a realizar e incluye revisarla, Safety Meeting Topics instalarla, saber cómo subirse y pararse, usarla correctamente, cuidarla From State Fund CA. y guardarla. Esta combinación del uso de equipo seguro y su utilización sin riesgos puede eliminar la mayoría de los accidentes que ocurren con Ladder safety begins with selecting the right ladder for the job and las escaleras. includes inspection, setup, proper climbing or standing, proper use, care, Revise siempre la escalera antes de usarla. Cheque que las escaleras and storage. This combination of safe equipment and its safe use can de madera no tengan rajaduras ni grietas, y que las escaleras de metal eliminate most ladder accidents. y de fibra de vidrio no tengan curvaturas ni roturas. Nunca use una

Keep Up With Ladder Safety

Always check a ladder before using it. Inspect wood ladders for escalera de mano que esté dañada. Póngale una etiqueta de "Defective" cracks or splits. Inspect metal and fiberglass ladders for bends and ("Defectuosa") y repórtela a su supervisor. breaks. Never use a damaged ladder. Tag it "Defective" and report it to Cuando coloque la escalera, asegúrese de que está derecha y fija your supervisor. firmemente en el suelo o el piso. Si una de las patas está más baja, When setting up a ladder, make sure its straight and sitting firmly súbala utilizando un objeto estable, no la ponga sobre cajas, ladrillos ni on the ground or floor. If one foot sits lower, build up the surface with ninguna otra base poco estable. Recargue la escalera en algo firme, no la ponga sobre una superficie de cristal. firm material, dont set it on boxes, Asegúrese de mantener un ángulo estable bricks or other unstable bases. de 1:4. Es decir que por una distancia Lean the ladder against something de un pie horizontalmente entre la base solid, but not against a glass de la escalera y la pared, haya cuatro surface. Make sure the ladder is pies de distancia vertical entre el suelo placed at a safe angle, with the y el extremo superior de la escalera. base away from the wall or edge of Mantenga las escaleras lejos de las the upper level about one foot for entradas y los pasillos, excepto si hay every four feet of vertical height. barreras para protegerlas. Keep ladders away from doorways or walkways, unless barriers can Asegúrese de que los escalones y protect them. travesaños de las escaleras no tengan Keep the steps and rungs of the ladder free of grease, paint, mud or other slippery material. And remember to clean debris off your shoes before climbing. Always face the ladder when climbing up or down, using both hands to keep a good grip on the rails or rungs. Never carry heavy or bulky loads up a ladder. Climb up yourself first, and then pull up the material with a rope or bucket. Many ladder accidents occur because of slipping or skidding. You can prevent these accidents by equipping the ladder with nonslip safety feet, blocking its base or tying it to a sound, permanent structure.

grasas, pintura, lodo o cualquier otro material resbaladizo. Y no olvide quitarse la basura de los zapatos antes de subirse. Siempre suba o baje con la cara hacia la escalera y use ambas manos para agarrarse bien de los pasamanos o de los travesaños. Nunca suba la escalera cargando objetos pesados o voluminosos. Suba usted primero y luego eleve el material con una cuerda o una cubeta. Muchos accidentes ocurren porque las escaleras se derrapan o patinan. Usted puede prevenir esos accidentes si pone a la escalera patas de seguridad antiderrapantes, le bloquea la base o la amarra a una estructura estable y permanente.

Tratar de alcanzar demasiado probablemente es la principal causa de las caídas de las escaleras. Una Overreaching is probably the most common cause of falls from buena regla a seguir es mantener siempre la hebilla de su cinturón dentro ladders. A good rule is to always keep your belt buckle inside the rails of de los pasamanos de la escalera. No trate de mover la escalera cuando a ladder. Dont try to move a ladder while youre on it by rocking, jogging usted la esté usando meciéndose, dando tumbos o empujándose para separarse de la pared de apoyo. or pushing it away from the supporting wall. Cuando termine su trabajo, guarde la escalera en el lugar apropiado When youve finished the job, properly store the ladder so it wont be exposed to excessive heat or dampness and will be in good condition para que no quede expuesta a la humedad o al calor excesivo, y para que esté en buenas condiciones cuando se use de nuevo. for the next time. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

COMPONENT MANUFACTURING dverti$er

Don’t Forget! You Saw it in the

November 11th, 2011 #04120

Adverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Page #30

Business Listings

JobLine.com, inc.

The

800-289-JOBS Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com

Finley, Colmer and Company

J. Chip Dean PRESIDENT

FINANCIAL ADVISORY SERVICES TO MID-MARKET COMPANIES Working Capitalization | Alternative Lending Sources | Cash Flow Management

We’re here when you need help!

Peter W. Colmer Ph. 770-668-0637 Fax 770-730-9149 pwc@finleycolmer.com

PRESIDENT

770-668-0637

Time To Hire? www.thejobline.com

3091 Governers Lake Dr. Suite 450 Norcross, GA. 30071

Bruce Mann

Wood Roof & Floor Trusses Wall Panels Engineered Components Gould Design, Inc. Christopher A. Gould - President

440 Spring Street, Marshfield, MA. 02050 phone: (314) 374-7400 email: CDean@ComponentRunner.com www.ComponentRunner.com

Manager

13540 East Boundary Road Building I, Suite 102 Midlothian, VA 23112-3943 brucemann.kbbp@gmail.com

CAD Design

Ofﬁce: 804-744-7253 Fax: 804-744-7420 Cell: 804-304-7253 www.kb-bp.com

DESIGNING TO YOUR NEEDS... ONE PROJECT AT A TIME

Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards

Is your Safety Program Working?

Industry Leading Professionals at your fingertips Overall design department cost reduced, saving you $$$ Experienced with multiple industry design software suites Up to date with US & Canadian Building Codes

(772) 475-3583 - Call Today cgould@goulddesigninc.com | www.goulddesigninc.com

40+ consultations have demonstrated that companies can improve their bottom line through lean and TOC principles. Time standards (R.E., S.U. Man-Minutes) for truss labor estimation are provided. See what past clients are saying on web site. Payback less than 3 months.

The easiest and most inexpensive truss labor tracking program available! No Pre-Scheduling of orders or employees Any order or shop employee can be logged into any workstation at any given time for maximum flexibility! ½ the normal pricing of plate providers’ truss labor tracking software cost. No Setup & Installation Fees. Use Existing Shop Computers. Free, No Obligation 3-Month Trial Period

www.todd-drummond.com Phone: 603-763-8857

PHONE: 800-289-5627

Leverage Our Extensive Experience to Gain:

Continual reduction in incident frequency & severity Sustained productivity, quality and customer relations Avoidance of regulatory costs, liability and risk Increased employee retention Strengthened business reputation

BIG PICTURE SAFETY, L.L.C. EXPERIENCE ~ RESULTS ~ SAVINGS

888.519.4130 CALL NOW! info@bigpicturesafety.com www.bigpicturesafety.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982