September 2017 Advertiser

A #

218

The

September 2017 #10218

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

BETTER SYSTEMS.

BETTER RESULTS. MATCHPOINT ™ DIRECTDRIVE SYSTEM

INCREASE OUTPUT WITHOUT INCREASING Y O U R F O O T P R I N T. COPYRIGHT ©2017 MITEK INDUSTRIES, INC. ALL RIGHTS RESERVED

MiTek ’s new MatchPoint™ DirectDr ive System is a fully integr ated s of t w ar e an d m ater ial han dl in g s y s tem that b o os t s r o of tr us s c u t tin g an d a s s emb ly for gr e ater p l ant p r o duc ti v i t y. >

O f fer s s or tin g , optimizin g an d p r intin g c ap abil i tie s

>

C omp lem ent s MatchPoint™ BL A DE w o o d p r o ce s sin g s y s tem an d W iz ar d P D S ® A u to Jig gin g s y s tem

>

Re duce s l ab or

Complete or configure your DirectDrive System.

Learn more at MiTek-US.com/DirectDrive

A

The

Component Manufacturing dverti$er

Sections Articles

Inside

New & Used Equipment Saws .....................................................................................................................................................5

Truss Equipment ................................................................................................................................27

Panel Equipment ................................................................................................................................42

Trucks & Trailers ................................................................................................................................51

Misc. Equipment ................................................................................................................................53

Door, Stair, Beam Equipment .............................................................................................................62 Lumber & EWP Market ...............................................................................................................................63 The JobLine Hiring Zone .............................................................................................................................74

Available Jobs .....................................................................................................................................75

Available Candidates ..........................................................................................................................76

Design Team Suite ..............................................................................................................................72 Calendar of Events ......................................................................................................................................82 News & Announcements ..............................................................................................................................89 Design of the Day ...........................................................................................................................................94

Advertiser Forum: Old (or Young) Dogs and New Tricks ................................................................................4 Joe Kannapell – Wall Panel Designer Primer ...................................................................................................6 Sean Hubbard – Square 1 Design & Manufacture: BCMC Factory Tour ......................................................12 Todd Drummond Consulting, LLC: Pride Can Blind Us All from Seeing and Learning Things For .............24 Better Bottom Line Results Glenn Traylor: Can Technology Alone Cure Quality Issues? .........................................................................30 Ben Hershey – 4Ward Consulting: Improve Your Production Processes and Say “NO” to Waste .................38 Robert Glowinski – AWC: Ozone NAAQS Already Sufficiently Protective of Public Health .......................65 Matt Layman – LLG: September Surge at Historically High Prices ...............................................................67 AWC: Fire Testing Completed on Full Scale Mass Timber Building .............................................................68 Safety First Topics in English/Spanish ...........................................................................................................71 Thomas McAnally – The JobLine: Compensation Calculators .....................................................................81 Kelly Sias, PE – Simpson Strong-Tie: The Never-Ending Search for Truss Repair Information ..................84 Joe Kannapell – MiTek: The Last Word .........................................................................................................95

Advertisers

Serving the Structural Building Components Industry

4Ward Consulting .....................................................................................................................................38,52 Acceptance Leasing & Financing ............................................................................................................45,57 Acer, Inc .................................................................................................................................................8,60,90 Apex Machine Sales ...................................................................................................................................56,64 Clark Industries, Inc. ..................................................................................................................................22,40 Eagle Metal Products .................................................................................................................................15,36 Eide ................................................................................................................................................33,37,61 Fitzgerald Group ............................................................................................................................................31 MiTek | USP ......................................................................................................................................2,6,95,96 Panels Plus .................................................................................................................................................42,44 Simpson Strong-Tie ....................................................................................................................14,28,84,92,93 Square 1 .....................................................................................................................................12,13,32,43,54 The Hain Company ..........................................................................................................................10,45,55,94 Todd Drummond Consulting, LLC .....................................................................................................24,25,26 Triad | Merrick Machine ............................................................................................................................48,58 Trussmatic .................................................................................................................................................10,31 Vaagen Brothers Lumber ........................................................................................................................63,66 Wasserman & Associates ................................................................................5,17,19,29,34,41,46,47,49,51,62 Wood Truss Systems .........................................................8,9,20,21,23,27,29,35,41,49,50,51,53,55,62,83

A

Th e

Component Manufacturing dverti$er

Adverti$er

September 2017 #10218 Page #4

Don’t Forget!

You Saw it in the

Advertiser

Forum

A

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Published Monthly Publisher

Anna L. Stamm Director of Communications and Marketing Component Manufacturing Advertiser.

Old (or Young) Dogs and New Tricks

Thomas McAnally twm@componentadvertiser.org

Editor Anna L. Stamm 800-289-5627 x 3 anna@componentadvertiser.org

Distributed FREE

T

hey always say, “you can’t teach an old dog new tricks.” Okay, but do they really look at it from the dog’s point of view? Think about it. Hopefully, the dog is in a nice, comfortable routine. Then, here comes a person wanting him to do something new, which takes a lot of effort.

What is the reward? It’s probably some little treat. You can’t tell the dog some long explanation of the benefits of changing his routine. He won’t understand logical rationalizations. He can see the treat, but that alone might not be enough of an incentive.

Incentives, Logic, and Change Fortunately, people are smarter than dogs. We can perform complicated reasoning before making decisions. We can consider new ideas, new products, new methods, and new routines.

It’s not our age that keeps us from making changes at work or at home—it’s the way we calculate the costs and benefits.

Big Ideas and Big Rewards Like it or not, we live in a world that is changing constantly. A good example of something new that has “taken off” in the past few years is cross-laminated timber (CLT). An article on the recent fire testing is included in this issue, and I expect to see more CLT news in the future.

An excellent counterpoint to the CLT example, however, is The Last Word on Southern Pine.

Having been an essential building material for many years, this resource is very far from being new, but new developments in how it may be processed could reap great rewards.

New (or Old) Tricks

Via e-mail subscription Download PDF or Read on line at www.componentadvertiser.com News of Interest and Advertising inquiries can be submitted to: anna@componentadvertiser.org An Open Forum for many sources.

Deadline 20th of each month.

Articles, Trade Names, and Logos are the property of their respective owner or creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional.

Believe it at your own risk!

Copyright 2008-2009-2010 -20112012-2013-2014-2015-2016-2017

Component Manufacturing Advertiser The

Sometimes it’s new approaches or products that appear on the stage, other times it’s old ideas that have found new advocates and new uses. Just as age is not what holds us back, novelty is not necessarily what propels us forward.

So whether or not we decide to make a change, or learn a new trick, it’s important that we continue to honestly calculate the costs and benefits of both action and inaction.

Advertiser a division of

JobLine, Inc.

the

411 Walnut Street #12250 Green Cove Springs, FL. 32043

no reproduction in whole or in part without permission from the component manufacturing advertiser Archive Copies Available On Line www.componentadvertiser.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #5

Adverti$er

Don’t Forget!

You Saw it in the

NEW SAWS NEW!

NEW!

NEW!

Monet DeSauw FWA 500 Floor Web Cutter • • • • • • • • • • • • • •

Monet DeSauw DeRobo Linear Saw •

Push Button Powered Blade Angulations Single Push Button Setting for 2 Blades per Side Electronic Digital Readouts Backup Mechanical Indicators Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber 12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) 60 Pieces per Minute (4) Internal 16” Blades & (1) External 16” Cut-Off Blade Pneumatic Blade Brake on External Blade Dust Hoods Vibrating Waste Conveyor (under saw) Add $3,600 for 12’ Incline Waste Conveyor (adjacent to saw) Add $1,700 for Extra Set of Blades Add $6,500 for Single Sided Setup 480 Volt / 3 Phase FOB MO

• • • • • • • • • • • • • •

$50,000

Automated (Truss Design Software Download) or Semi-Automated (Touch Screen Entry) Operation All Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data 22” x 40 Tooth Blade on PAE Cut 1 or 2 Boards up to 20’ (2 Second Plunge Cut) Cut Chords, Webs, Rafters, Wedges & Stair Stringers Cut Long Scarfs by Multi-Plunging Servo Positioning on Infeed, Angle & Outfeed Pusher Over Travel Protection Ink Jet Printer Lumber Optimization Program Belt Waste Conveyor 480 Volt / 3 Phase / 60 Amp Includes 5 Day Onsite Installation & Training Optional Monet DeSauw Live Deck, Bunk Feeder & Incline Belt Waste Conveyor

FOB MO $170,000

Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST!

• • • • • • • • • • • • • • • • •

We’ll even help sell your used equipment too!

Automated Apollo Saw FOB New Zealand

NEW!

•

New Improved Design!

•

Solid 48” x 72” Frame and Arm Construction

• •

Monet DeSauw DeSawyer 2000 Automated Saw Touch Screen User Interface with Backup Mechanical Controls 3 Operating Modes: Auto, Semi-Auto & Manual All 20 Axes of Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data Anti-Collision & Optimizing Programming Auto Calibration Productivity & Time Tracking Maintenance Diagnostics Variable Speed Conveyor (0-50 Flights per Minute)with Powered Hold Downs (1) 30” x 80 Tooth Blade (27 3/4” Scarf on PAE) (4) 16” x 40 Tooth Blades (13 1/2” Scarf on Centerline) Pneumatic Blade Brakes on all 5 Blades 16 1/2” to 20’ Length Capacity (11” Minimum on Square End Blocks) Vibrating Waste Conveyor Under Saw 480 Volt / 3 Phase Includes 4 Day Onsite Installation & Training Add $2,100 for Extra Set of Blades Optional Live Deck, Label Printer, Ink Jet Printer, Catcher Display & Incline Belt Waste Conveyor. $252,000 FOB MO

•

20’ of MDF Bench Top with Automated 20’ Length Stop & 10’ Gravity Conveyor Workstation, Control Cabinet Enclosure & 17” Touch Screen Integration

Minimizes Flex on the Saw Frame

•

Serial Control System

Direct Drive 7.5 HP Motor with 18” Blade (230/460 Volt)

•

Includes all Plug & Play Wiring

•

Minimum Angle of 10 Degrees with 36” Stroke for Long Scarf Cuts

•

MangoTech/Spida Truss Cutting Software

•

Add $3,680 Two Day Onsite Installation & Training

•

Automated 160 Degree Angular Movement

•

•

Variable Stroke Limiter & Plexiglass Shield for Operator Safety

Add $750 for 12 Month Phone & Virtual Tech Support

•

Add $275 for Spare Blade

•

MDF Profiled Saw Bench Top Provides a Safe Working Platform

•

Add $558 for Saw Laser Guide

•

Add $890 for Dust Collector

Dust Extraction Outlet

•

Excludes Freight & Customs Charges

•

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

$48,753 FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #6

Wall Panel Designer Primer Joe Kannapell - Senior VP MiTek Industries, Inc. www.mii.com

I

n the 1960s, Ed Ryan set basic standards for panelizing walls, and for decades his homebuilding company (now NVR Inc.) followed his lead. His standards also made it easy for us to provide his wall panel equipment. The name we gave it, “Panel-Rite,” would have pleased Ed, since he believed that framing exclusively 8 foot tall walls with 16” on center studs was the right way to panelize. Taller walls, special blocking, and non-standard junctions needed to be added in the field. Jim Ryan even further “skinnyed down” his brother’s panels in his Ryland Homes product, removing every extra stud he encountered. As long as Ed and Jim kept their framing crews busy, all was well – even though these crews needed skilled carpenters to finish the framing. That was then . . .

Now, 50 years later, framers effectively have shifted much of their field work into the panel shop, compelling suppliers like NVR, Toll, and BFS to build balloon and rake panels, include tub and cabinet blocking, and any assembly that will endear them to the framers. Panel shops have little automation with which to address the complexity (see “Panelization Automation” in July 2017’s Component Advertiser). As Gus Pearson at BFS says, “We’re building the entire house in our plant.” Today’s panel designers face a task arguably more complex than truss designers (see displayed panel elevations), as they must consider: 1. Architectural Details • Not just bearing wall locations, but all interior dimensions • Code required clearances in bathrooms, halls, stairs, landings, etc.

• Opening sizes depend on door and window supplier, often an afterthought, requiring repairs o If rough opening too small, header will often need to be replaced o If rough opening too large, entire opening must be furred out o Egress windows require lower sills and minimum opening sizes • Code required wall bracing which may require portal frames and prefab shear panels • Elevations in conflict with floor plans o First and second floor windows not in exact vertical alignment o Windows not centered or symmetrically spaced o Options drawn exclusively in plan view, without accompanying elevations PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #7

2. Structural Requirements • Transferring girder and header loads to foundation – LVL vs. stacked stud capacities • “Simplified” APA wall bracing which may require portal frames and pre-fab shear panels • Stud size and spacing for tall walls and multi-story applications • Backing for wall connections to foundations and studding for steel rods (Zone 4 tie-downs)

3. Framer/Builder Preferences • Sheathing/energy code compliance • Junction types and sheet rock backing • Terminology Since wall panel designs are prescriptive (derived from the building code), the builder and his EOR/building designer should provide guidance on many of the above details. Written verification of exact opening sizes should be provided by the builder. Extensive checklists encompassing the above items should be reviewed with the buyer and entered into software defaults for repetitive jobs.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #8

Wood Truss Systems

manufacturers’

representatives

New Monet DeSawyer 2000 Component Saw !

W NE $242,000 Base Condition: New Location: MO

New, Monet DeSawyer 2000, computerized, five-bladed component saw, sets up in 15 to 17 seconds, can run in manual mode, downloads projects from a network or manually using display screen controls.

Features all powered movements, cuts from 15" 90/90 cuts to 20 foot length, 2 x 3" to 2 x 12" lumber depths and internal brakes are standard. Options include enhanced servo controls featuring autocalibration, catcher's display and either shaker or belt scrap conveyor and incline. 440 volt, 3 phase electrical. www.woodtrusssystems.com

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #9

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

SAWS

manufacturers’

Representatives

NEW! 1998 Northtech Under-Table Saw 1998 Northtech model CFS-18L undertable saw. Features 18” blade driven by 10 h.p motor, foot pedal controls, and shock absorber. 2” x 12”, 3” x 11”, 4” x 10” cutting capacity. System includes SECO single bag dust collection system, and roller conveyor. Air and 3 phase electrical required. $3,490 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Whirlwind Model 1000LH Whirlwind up-cut saw features 18” blade, driven by 5 HP motor to 3 drive belts, mag starter and heavy steel housing. Adjustable cycle time up to 60 cycles per minute cushioned by HD shock absorber. System Includes Delta dust collection system and measuring stops. Air and 3 phase electrical required. $3,490 NOW 1,490 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1998 MiTek Cyber Saw Outfeed Conveyor MiTek powered outfeed conveyor designed for the Cyber saw, model 82274, motorized feed drives board away from saw conveyor.

This conveyor was designed to position the board for accurate ink-jet marking after cutting, then move board to the outfeed end stops. Includes mounting arm and control box for ink-jet marking system attachment, but no ink jet printing equipment. 208230 / 460 volt, 3 phase electrical. $5,990 NOW $1,990 FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

TimberMill 6-20 Component Saw •Serial Number R0334 (1987) •Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12” up to 20’-0” •Powered Angulation & Carriage •Chain Drag Waste & Incline Conveyor •Extra Blades •Recently Checked & Repaired $14,900 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Monet FWA 500 Floor Web Saw

New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches to four foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade. Option for longer carriage length, single sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor. 440 volt, 3 phase. $ASK for PRICE, FOB MO.

765-751-9990

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

$34,990 FOB OH

2015 TCT XL Linear Saw

2006 TCT 1150 Linear Saw 2006 TCT Series 1150 linear saw features 5 HP, 3 phase saw motor with 24" carbide tip blade, 3-axis motion control system utilizing magnet servo motors. Cuts webs from 2x4 or 2x6 material from 3" to 20 feet in length. Saw includes a PC with touch screen, Matthews inkjet printer (needs repair) designed to print on one, 1 1/2" edge of board, with infeed, outfeed and long incline conveyors. 240V, 3 phase electrical service. 65 PSI air required.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

TCT 2015 XL linear saw features 5 HP, 3 phase saw motor with 16" blade, 3-axis motion control system utilizing magnet servo motors. Saw has infeed on the right with outfeed to the left. Cuts from 2x4 to 2x12 inch material from 3" to 20 feet in length from stock lumber from 8 foot to 20 foot long. Saw includes a PC with touch screen, REA model MA-0002 printer (prints on one, 3 1/2" face of board), with (3) infeed arms 12 foot long x 7 foot on center, 11 foot long x 16" wide belt outfeed, OEM supplied 10 foot long scrap conveyor and short incline. Includes some spare parts and manual. 240V, 3 phase electrical service. 65 PSI air required.

Price: $115,990 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #10

Refurbished Systems Available! w/new 10’ rails & stops $3,790!

Call Leonard for current specials!

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com

First Fully Automatic Production Line for the Wooden Roof Truss Industry

WWW.TRUSSMATIC.COM PHONE: 800-289-5627 2017-04-24_lehtimainos_final.indd 1

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 24.4.2017 18.51

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #11

SAWS

2004 Alpine Speed Cut Express Automated Radial Arm Saw Alpine Metra-Cut Saw (5 HP-3 Phase) with 16’ Blade. Speed Cut Express Automation with Touch Screen. Computer Automated Stop and Automated Saw Angulation as directed by Truss Design Software. Infeed/ Outfeed Roller Conveyor with Stands. Saw Barrier Guard. 2 Available at $15,000 Each FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 TimberMill 4-16 Web Saw (4) 16” Blades cut 2x4 and 2x6 Roof Truss Webs up to 16’ in length. Cut 4x2 Floor Truss Webs down to 11” in length. Single Side Digital Readouts. Powered Carriage, Angulation & Pivot Axis Elevation. Powered Upper & Lower Material Conveyor. Chain Drag Waste & Incline Conveyor. 480 Volt / 3 Phase. Add $2,000 for 208 Volt to 480 Volt Electrical Transformer. $19,900 NOW $18,900 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1997 Mitek EasySet 1000 Component Saw • Five Blade Component Saw cuts up to 20' • (2) 16", (2) 20" and (1) 30" Blade • All Powered Movements • Digital Readouts • Powered Hold Downs • Belt Waste Conveyor (under saw) • Incline Waste Conveyor (adjacent to saw) $17,500 NOW $14,500 FOB MD Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 TCT Model 1100 Linear Saw Cut 2x4 and 2x6 Lumber from 3” to 20’.

Tops, Bottoms, Webs, Sliders, Wedges and Scissor Bottoms. 230 Volt / 3 Phase 5 HP Motor with 24” Blade. Ink Jet Printer.

Scrap Conveyor. $36,900 NOW $28,000 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

is a Proud Sponsor of the 2017

The Annual BCMC 5K Run/Walk benefits BCMC Build, which partners with Operation Finally Home to provide mortgage-free homes to veterans and their families.

Join the participants in Downtown Omaha!

MiTek Combi Set Web Saw Four Blades Cut Lengths from 2' to 16'. Waste & Incline Conveyor. Extra Set of Blades. 220/440 Volt - 3 Phase. $13,000 FOB MO. Wasserman & Associates 800-382-0329

Speed Cut Metra-Cut Birdsmouth Saw The center point is adjustable up to 6” into the material for cutting of notches (birdsmouth or seat cuts). Needs new scale pointer. Excludes Saw Blade and Infeed/ Outfeed Roller Conveyor. $2,500 FOB WI Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #12

WWW.SQUARE1DESIGN.COM SQUARE 1 DESIGN & MANUFACTURE INC.

BCMC FACTORY TOUR T

his year’s BCMC is going to be unparalleled to any other trade show for Square 1 Design & Manufacture Inc. With over 5,000 square feet of floor space, we have decided to bring the manufacturing to you. LIVE WALL PANEL MANUFACTURING ON THE SHOW FLOOR! The Spida Wall Panel Extruder will make you question every piece of equipment you use for wall panel construction. It is faster, safer, and more advanced than any conventional system. Minimize Sean Hubbard errors with Spida automation. Minimize staff with Spida automation. Minimize movements with Spida automation. Maximize your production with Spida automation. Finally, maximize your profits with Spida automation. Additionally, Triad will be sheathing those same walls with the Triad Generation 3 Squaring/Sheathing Table.

Held hourly, we will be manufacturing components at an unprecedented speed!

Witness the newest ways to stack roof and floor trusses with the most advanced stacking functionality ever utilized in the building components industry. Live and functioning at the BCMC Show in Omaha!

We have designed each exhibit with you in mind. Unparalleled accesses to each piece of equipment, walk around access, crawl under access or even interact with each piece of equipment. Three interactive touch screen displays, detailing some of the most advanced options available in the building components industry will be available for interaction.

Let us take you on a factory tour in Omaha. Come join us in October as we Raise The Stakes.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

SOLUTIONS FOR TRUSS & WALL

CUTTING, JIGGING, PRESSING, NAILING & STACKING

866-647-7771

Truss software that’s scalable, customizable and seamlessly integrated with your business.

( Is that possible? )

Visit us at BCMC for a demo and see for yourself.

Not coming to BCMC? Just call (800) 999-5099 to schedule a demo with your Simpson Strong-Tie representative. Š 2017

Simpson Strong-Tie Company Inc. BCMC17

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #15

SAWS

Visit Our Advertisers’ Booths at BCMC Two MiTek Easy Set 1000 Component Saws Two MiTek Easy Set 1000, 5-blade component saws, model 7027000/1000, each with swing-arm central control system, digital/analog display, power hold-down, power length carriage, waste conveyor, incline, extra set of blades, cuts 2x4 to 2x10 lumber depths from 10 inches long @ 90/90, 4-angle floor webs from 17 inches, up to 14 feet in length. One is operational with a date of manufacture of December, 1998 and the other is being sold for parts. 220v, 3ph power. $9,990 NOW $4,999 FOR BOTH! Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1995 MiTek Easy Set 1000 Component Saw 1995 MiTek Easy Set 1000, 5-blade component saw, model 7027000/1000 with swing-arm central control system, digital/ analog display, power hold-down, power length carriage, waste conveyor, incline, extra set of blades, cuts 2x4 to 2x10 lumber depths from 10 inches long @ 90/90, 4-angle floor webs from 17 inches, up to 14 feet in length. 220v, 3ph power. $8,890 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

4Ward Consulting Group

1312

Apex Machine Sales

1010

Clark Industries, Inc.

633

Eagle Metal Products

511

Eide Integrated Systems

818, 819, 919

MiTek | USP

1998 Mitek Cyber Saw Fully Automated 5 Blade Component Saw 1-32”, 2-20” and 2-16” Blades cut 4x2 and 2x4 through 2x12 up to 20’ in length Touch Screen Computer Waste Conveyor (under saw) Excludes Incline Waste Conveyor (adjacent to saw) $28,000 FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Razer v4 Linear Saw Six-Axis CNC Linear saw – Currently in operation and consistently upgraded this saw features a 6000 RPM hydraulic saw motor, full axis of motion to complete straight, single/compound bevel and rip cuts with a 13 3/4” blade. Handles material up to 20’ long, 14” wide and 4” depth. OEM supplied in-feed deck and outfeed conveyor with kick-off table are included. Right to Left hand feed configuration. Includes spare blade, encoder, (2) encoder wheels, sensor cables, and all available spare parts.

Includes Windows XP Service Pack two software and transformer for 230 or 600v to system specific 415v, 3Ph, Minimum 100 psi air required. (Ink jet printer shown in pictures is not included.) $39,490 FOB MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1313, 1333, 1408

Panels Plus

1332

Simpson Strong-Tie

703

Square 1 Design & Manufacture

125

Todd Drummond Consulting

621

Triad | Merrick Machine

319

Trussmatic

1028

vaagen Brothers Lumber

1015

Wasserman & Associates

611

Wood Truss Systems

432

Pacific Trail Package Saw www.carolinamachinerysales.com (704)288-1904

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

FLEXIBLE EFFICIENT ACCURATE Truebuild® Layout is an entirely new truss design platform by Eagle Metal, developed in the powerful & proven parametric modeling environment. Design modifications are automatically populated throughout the model for precision accuracy.

To maximize designer efficiency, multiple input methods can be used, including conventional UDLR, Reference Dimensions and tracing via DXF, DWG or PDF files.

SOFTWARE SUITE

Learn more at eaglemetal.com or give us a call at 800.521.3245

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #17

Adverti$er

Don’t Forget!

You Saw it in the SAWS

NEW! 2005 Hundegger SC-1 Linear Saw plus 2nd Parts Saw Servo Driven Single Blade Linear Saw. Automated Cutting with Software Design Download to Operator Console. 24’ Loading Conveyor System. Automated Clamping & Positioning System. Angle & Bevel Drive for Roof Truss, Floor Truss & Wall Panel Cutting. Outfeed Table with Ink Jet Printer. Waste Conveyors (Small & Large Piece). New Computers in 2016 (Windows 7 Professional). Removed From Service in March 2017. Includes 2nd Hundegger Parts Saw (many parts have transferred to working saw). New Spare Parts Inventory $79,000 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 Alpine Model 276 Linear Saw Cuts all standard truss parts Cuts bevels: any plumb angle, bevels from 90 to 25 degrees Long scarf cuts (60") 6 Axes of automation powered by servo motors 7.5 HP motor with 20" blade (1 extra blade) 230 Volt / 3 Phase Touch screen computer Ink jet printer (needs rebuilt) Infeed & outfeed conveyor Waste conveyor (under outfeed conveyor) Extra parts: 2 drive infeed belts, 1 encoder, 2 proxy sensors, 2 hold down cylinders, 1 infeed hold down cylinder FOB AZ $69,900 EQUIPMENT FINANCING available from SLS Financial Services Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2013 Mango Plate Marker with DeWalt Saw MangoTech Automated 20’ Length Stop/ Plate Positioner as directed by Wall Panel Software Touch Screen Computer with Cabinet Enclosure MangoTech Plate Cutting & Marking Software 20’ Outfeed & 10’ Infeed Roller Conveyor with Stands DeWalt Miter Saw Add $4,750 for 2 Day Onsite Training/Installation and 12 Month Tech Support. $16,500 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

TimberMill 6-20 Component Saw (SD) •Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12” up to 20’-0” •Powered Angulation & Carriage •Chain Drag Waste & Incline Conveyor •Extra Set of Blades •Many New Parts in the Last 2 Years •Removed from Service in July 2017 $15,500 FOB SD Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

2003 Alpine ALS 276 Linear Saw Alpine ALS linear-feed saw, model 276.

Includes 24 foot OEM infeed conveyor and 20 foot OEM outfeed conveyor, Inkjet printer (single 1 ½” face), and undersaw scrap conveyor. All servo controlled functions, 7.5 hp motor with 20” carbide tipped blade, OEM roller belt infeed upgrade and software upgrade to 2012 standard. 208 volt, 3 phase electrical.

NOW $96,880, FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Spida Vector Saw with Mango Plate Marker (FOB IN) $44,975 800-382-0329 | www.wasserman-associates.com SAWS

2004 Hundegger SC-1 Linear Saw 2004 Hundegger model SC-1 linear saw, in operation, includes 90 degree vertical stroke action, stacks boards to four-high, horizontal positioning, 24-foot infeed and out-feed with second clamping and positioning system, electronic controls and operator console with two (2) computers, hydraulic unit, automated clamping system, ink on two faces, vertical mill head router option, a/c option for cabinet cooling and upgraded safety light barrier.

Upgraded to Windows 7. No angled conveyor included. Available in December of 2016. Limited warranty available with OEM installation supervision (at additional charge). $119,990, FOB NV. NOW $89,990 Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

TimberMill 4-14 Web Saw (AZ) •(4) 16” Blades cut 2x4 and 2x6 Roof Truss Webs up to 14’ in length •Cut 4x2 Floor Truss Webs down to 11” in length •Powered Carriage, Angulation & Pivot Axis Elevation •Powered Set-Up Using Scales & Dials (digital readouts are not operational) •Powered Upper & Lower Material Conveyor •Chain Drag Waste & Incline Conveyor •480 Volt / 3 Phase •Checked, Repaired and Calibrated in July 2017 $16,500 FOB AZ PDF: TimberMill 4-14 literature.pdf Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry FAX: 800-524-4982

THE REAL DEAL

Don t be fooled by copycats. There is only one lumber retrieval system on the market with a well-known record of reliability—and it s always been built be Acer.

Ask around—the Ranger Retrieval System has no equal.  

  

Rigid overhead truss forms a strong backbone for long-term reliability.

We designed and built our own vacuum pick-up system specifically for handling lumber.

Self-cleaning function activates after every cycle, preventing dust problems common to other vacuum lumber pickup systems.

Reduce labor costs and eliminate picking errors by feeding your linear saw automatically.

ACER invented and holds the patents on this style of lumber retrieval system.

www.acerinc.com RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244 and other patents pending.

A

Th e

Component Manufacturing dverti$er

You Saw it in the

September 2017 #10218 Page #19

SAWS

1995 Auto-Omni 5 Blade Automated Component Saw Automated Setup as directed by Truss Design Software Output. Computer, Enclosure & Stand. 5 Blades cut 2x3 through 2x12 and 4x2 from 11” to 20’. Ink Jet Printer.

Shaker Pan Waste Conveyor (under saw).

Excludes Incline Waste Conveyor (adjacent to saw). Extra Set of Blades. Installation Available (quote upon request). $18,500 NOW $14,500 FOB WI. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Speed Cut Saw with Hain Measuring System Speed Cut Metra-Cut Saw (5 HP / 3 Phase).

20’ Hain Powered Measuring System.

Cutting Depth of 6” with 16” Blade.

Angular Capacity of 164 Degrees. Saw Barrier Guard. Turntable Air Brake $8,300 NOW $7,000 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 Koskovich Omni Miser linear saw Roof truss AND wall frame square and angle cuts with print system B (both faces), Servo controlled angulation axis of movement, extended incline deck,(1) bulk feeder for up to 16 foot long lumber, (9) magazines for up to 16 foot long lumber: (1- 2x3, 52x4, 2- 2x6, 1- 2x8). Includes automated lumber advance (LASM), crooked lumber sensor (CLS), auto exit roller, vibrating trash pan, 5 HP, 3450 RPM arbor motor, computer monitor, console, spare blade and all available spare parts. 230 volt, 3 phase saw electrical. 110 volt, 1 phase computer electrical. $85,900 FOB KS Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

Adverti$er

Don’t Forget!

Saw Trax Panel Saw Saw Trax brand panel saw, with Bostitch model 1678 worm-drive circular saw, 15 Amps, 7 1/4" diameter blade, 5 foot x 9 foot frame limits. 120 volt, 1 phase electrical. $1,390 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 Timbermill 620 Pro Component Saw 1 9 9 4 Ti m b e r m i l l 6 2 0 P r o , m o d e l MH6Pro-20, six blades cuts lumber from 2x4 through 2x12, 4x2 lengths from 12” to 20’ including four angle floor truss webs from 18", all powered movements and analog readouts. "Pro" model features faster angulation movements and faster carriage speeds with soft-start technology.

Includes chain-drag scrap conveyor with incline, extra set of blades. 480 volt, 3 phase electrical. $22,900 NOW $18,990 FOB ID Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW! New Square 1 Rolsplicer New Square 1 Rolsplicer, splices 2"x3", 2"x4" and 2"x6" lumber with a 3 to 4 second cycle time. Presses the lumber together prior to imbedding plates. Embeds plate lengths up to 19 inches. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 480 volt, 3 phase electrical. Other voltages available. $17,409 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 Omni Miser Saw Automated Wood Processing System. Model RT (Roof Truss Components). Cuts 2x3, 2x4, 2x6, 2x8, 2x10 & 2x12 up to 16’ in length. HP Motor with 16” Blade. Incline Live Deck. 7 Magazine Feeders (3-2x4, 2-2x6, 2-2x8).

Bulk Feeder. Ink Jet Printer (One Face). Grizzly 2 Bag Dust Collector.

$89,000 NOW 69,500 FOB NE

800-382-0329 | www.wasserman-associates.com

2006 Weinmann WBZ-100 Automated Linear Saw

•Cut & Mark Truss and Wall Panel Parts •Upgraded in 2010 to include Routing (similar to the WBZ-120 model) •Servo Driven for Precise Cutting •22” Blade with 7 7/8” x 16 1/2” x 19’-8” Capacity •Infeed and Outfeed Roller Tables •Ink Jet Printer for Part Identification •Marking Pen for Wall Panel Layout •460 Volt / 3 Phase

$89,000 FOB Oregon

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

MORE THAN JUST A PRETTY FACE.

THE HUNDEGGER TURBO DRIVE SAW IS A FAST, ACCURATE AND VERSATILE, FULLY AUTOMATED LINEAR SAW SPECIFICALLY DESIGNED TO CUT STRUCTURAL COMPONENT PARTS.

Hundegger continues to stretch the cutting capabilities of our industry by providing a single saw with options that can perform basic drilling, milling and printing operations in addition to 4 -axis cutting.

Hardly another “pretty face”, the TURBO Drive is a solid evolution of the popular SC Series saws. This workhorse, like all of Hundegger’s production saws, benefits from their experience learned from a wide variety of wood cutting and milling applications from over 4,700 saws to date. Specific to our wood component industry, the TURBO Drive has been thoroughly developed for world-wide customers prior to its introduction to the US. Regardless of your cutting application, be it I-Joist, dimensional 2x lumber, or any variety of EWP, we have the experience and equipment to efficiently bring your job to market.

ÜÜÜ°7 `/ÀÕÃÃ-ÞÃÌi ðV ÊUÊÇÈx Çx£ ä

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #21

Wood Truss Systems

SAWS

manufacturers’

Representatives

NEW! Timbermill MH6C-20 6 Blade Component Saw Timbermill Model MH6C-20 component saw. Six blades including (1) 30” blade, (3) 22” blades, and (2) 18” blades cut lumber from 2x4 through 2x12, 4x2 lengths from 12” to 20’ including four angle floor truss webs from 18” with all powered movements.

Includes scrap conveyor with incline, operating manual, and spare set of blades.

460v, 3 Phase power. $16,990 FOB TN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Idaco International IV Web & Component Saw Four Blades (2-16”, 1-20” & 1-28”) with 5 HP Motors. Powered Angulation & Carriage. Maximum Length at 90/90: 20’0”. Minimum Length at 90/90: 1’-1”. Waste & Incline Conveyor. Many Extra Blades.

480 Volt / 3 Phase. $5,500 FOB IA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Used Hain Quick Rafter Cutter Board Sizes: 2x4 and 2x6. Motors: Two 2 HP / 220 Volt or 440 Volt / 3 Phase.

Saw Blades: 7 1/4” Carbide Tipped (set at 45 degrees). Angle Adjustment: Manual Rotation with Air Brake. Air Supply: 90 PSI. Carriage: Steel Rails with Steel Dual V Rollers. Pedestal: 3/16” Formed Steel with Powder Coat Finish. Saw Housing: 1/2” Billet Aluminum. Covers: 10 Gauge (1/8” thick) Steel with Powder Coat Finish. Fully Enclosed for Safety. $5,000 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

1994 MiTek Combi-Cut 4-Blade Saw 1994 MiTek Combi-Cut component saw, model 2000 Combi Cut, serial # CO15, four-head saw with powered angulation, Cuts from 1 foot at 90/90 to 20 foot lengths, angles from 10 to 105 degrees, digital angle readouts, power angulation, power length.

Cuts 4x2, four-angle floor webs from 19".

Includes under-saw waste conveyor (no incline), two extra 16" blades, manual and all available parts. Saw in use until end of January, 2016. 480 volt, 3 phase. $15,990 NOW $13,890 NOW $8,990 FOB MI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Square 1 - 40’ Trackless Floor Truss Gantry New, table guided (NO rail) floor truss machine by Square 1 Design & Manufacture.

This well designed machine builds floor trusses up to a standard 26 inch depth (32 inch optional). Working length of 40 feet. Other features include side eject, flip jig for build side, pop-ups for back plate side. Clamping by under-table cylinders controlling above-table steel fence. Floor truss gantry features twin 7.5 HP gearmotors for a total of 15 HP, 24 inch diameter roll, safety bars, 3 7/16” diameter, full-roll-length shaft with baffles. 440 volt, 3 phase. Price includes installation supervision from the manufacturer.

Also take advantage of the Square 1 factory promotion offering a $5,000 savings on a Rolsplicer or Floor Truss Finish Roller (FTFR) with the purchase of a new SQ-Series floor system through April 15th, 2016. $99,412, FOB IN

765-751-9990

2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $49,900 FOB AB NOW $39,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1999 Holtec Transcut II Bunk Saw Holtec Transcut II bunk cutter station features 20' fixed frame assembly, 3/8" Stellite armored guide bar, 3/8" chain saw chain, automatic chain tensioner, rack & pinion movement, and automatic shutoff.

460V, 3 phase power. $19,900 NOW $9,790 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

New Spida Automated Apollo Saw The Spida Apollo saw with Automation is a computerized, pull-arm type saw used for cutting either wood truss components or wall panel cutting and represents the lowestcost way to add an automated single-blade saw to your operation. Features include angle cutting from 10 to 170 degrees, 36 inch scarf cuts, patented variable stroke limiter for safety, solid frame and arm design, 17 inch industrial touch screen with enclosure, 7.5 HP motor, plug and play wiring making installations easier and includes cowls for adding a dust extraction system.

$48,680 - FOB NZE/IN

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

Considering Equipment? Consider Clark.

For over 40 years, Clark Industries, Inc. has been supplying the building components industry with manufacturing equipment, parts, and exemplary customer service.

Roof Truss Gantry Systems Multi-Head Truss Presses Jack Table Presses Floor Truss Machines Wall Panel Subcomponent Presses Column Laminators Post Nailing Machines Truss Handling, Conveying and Stacking Systems Custom Equipment

With a complete full-time machining, stamping, welding, and fabrication facility, our equipment is built in-house, proudly in the USA. We take great pride in our work, so contact us at 800/743-9727 or general@clark-ind.com today for OEM equipment and service!

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

SAWS

manufacturers’

1998 Auto Omni 5 Blade Component Saw 5-blade automated component saw includes [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade. Fully automated setup with full power length and all axis angulation, single sided setup from operator console cuts 2x3 through 2x12 and 4x2, 20’ to 9” @ 90°/90°.The saw has been very well maintained, and consistently upgraded since new including latest software version 7.2.2 running on MS Windows 7. Saw has received ​OEM upgraded lumber in-feed including 2x3 indexing, and upgraded guarding. Features belt waste conveyor with side pans complete and set of available spare cards, sensors, etc. 220v/440v 3ph, 110/220v single phase, 90 psi air required. $34,880 FOB MN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 Koskovich Auto Omni 5 Blade Component Saw 5-blade automated component saw includes shaker waste conveyor, [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade.

Fully automated setup with full power length and all axis angulation, single sided setup from operator console cuts 2x3 through 2x12 and 4x2, 20’ to 9” @ 90°/90°. Includes ink-jet marking system, remote monitor, and any available spares and manuals.

208/240/480 volt, 3 phase, and 110//220v single phase electrical required. $26,990 NOW $19,490 FOB OH. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Safety Speed Cut Model 7000 Panel Saw Safety Speed Cut model 7000, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 inch maximum thickness, accuracy within 1/64th of an inch, 10 foot welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include lower frame extensions, digital readouts, laser guide, stop bar, vacuum and midway fence.

208/230/460 volt, 3 phase electrical. $8,149 Base, FOB MN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

1998 SpeedCut Centerline Saw with Speed Measure Centerline radial arm saw includes centerpoint cutting, turntable cutting system, 20 ft. speed measure system with 20 ft. infeed conveyor, 10ft. outfeed conveyor. 230 volt, 2 phase electrical. $8,990 FOB OH. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1990 Speed Cut Saw with Speed Measure Device Speed Cut Metra-Cut Centerline Saw. Speed Measure Device. Infeed/Outfeed Roller Conveyor. Cutting Depth of 6” with 16” Blade. Angular Capacity of 164 Degrees. 5 HP / 240 Volt / 3 Phase Motor.

Saw Barrier Guard. Turntable Air Brake. $6,000 NOW $5,400 FOB IN. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Representatives

Wood Runner FastFrame Wall Panel Marking Saw The Wood Runner® FastFrame™ wall panel marking saw is the fastest, easiest way to cut and mark wall panel components. Feeds lumber up to 100" per second with a retraction rate up to 200" per second. Users report a 50% reduction in production time when compared with previous automated cutting and marking saws. Processing material from 2x4 through 2x15 is achieved with an aggressive 80 tooth,12" blade. The FastFrame cuts with a chop saw function for 2x4 material, then with guided "plunge" expansion for cutting material from 6", up to 15" in width. FastFrame marks boards with the next generation Matthews I-Mark V84i, DOD 8000+ MAXI inkjet for edge printing plate layout pattern (face printing available as an option). Base saw cuts 90º, the FastFrame also completes angled 45º cuts and compound cutting each optional. The FastFrame is as safe as it is fast with guard panels on the back of the saw, and a fully enclosed saw chamber. A true world class, state-of-the-art solution for wall panel component processing at an affordable price. Starting at $89,900 FOB MN.

765-751-9990

NEW!

September 2017 #10218 Page #23

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

NEW! New Monet DeRobo Linear Saw New, DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and open-stair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, left-to-right feed direction standard, lumber push and pull grippers for more accuracy, ink marking on the 1 1/2" face of the incoming boards and small piece capture and delivery to the front of the saw for easy access. Infeed deck and bunk feed are shown as options only. Works with the optional WoodRunner TM lumber retrieval system. 440 volt, 3phase. $169,000 Base Price, FOB MO.

765-751-9990 Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #24

Pride Can Blind Us All from Seeing and Learning Things For Better Bottom Line Results I

t has taken our industry quite a few years, but once again it is common for wood component companies for a 15%+ EBITDA in normal markets, in which the sales exceed a two-week lead time. Many are exceeding 20% EBITDA. Do you know how well your company did in comparison to the average? Perhaps you are not privy to such information, but maybe you know that things need further improvement. If improvement is a real goal instead of just talking about it, maybe you should consider doing something different instead of repeating the same processes and expecting different results. Everyone should ask, “What are some of the things that prevent serious improvement from happening within my group?”

Time and money are excuses many offer as the main reasons for not trying something different. Others say, “I need to find the right individual(s) to move us in the right direction.” If you feel these are your main obstacles, your company is more than likely going to continue repeating the same patterns and garner the same results it has always achieved. So what is preventing any company, department, or individual from making real, positive changes to garner better results? There are two main obstacles that must be overcome: pride and not admitting that you don’t have all the answers.

According to psychology studies, “Modern cognitive theory states that people tend to perceive reality in light of pre-existing expectations and will ignore large amounts of contrary data before finally changing their minds.” In other words, we perceive the world the way we want regardless of the evidence showing it differently. Why is this so often the case? The answer is simple but hard to overcome. In one word it is pride. We cannot see that change is needed, or if we do indeed recognize the changes needed, our pride blinds us and prevents us from admitting it. We allow our pride to perceive everything as being right or wrong, as if by admitting that change is wanted or needed, we are saying, “We were wrong, and they were right.” What worked in the past was a good thing, but evolving to meet the challenges of today does, in fact, require us to make changes and see things from a new perspective. To embrace better ideas, one needs to set aside pride and listen to others with a different perspective and experience. I can tell you from experience that I have seen the results, time after time, and that making positive changes garners significant net-profit gains that many are simply blind to what is so plain to see by others.

What are some good resources to start educating yourself with new ideas? Reading or listening to audio books is always a good starting point. Examples: The Goal by Goldratt covers the theory of constraints, any of the Dale Carnegie publications cover better management practices, and any books covering lean manufacturing will assist process improvement. Also, seminars at your local colleges and online training for the same type of information as described for book reading can help. In other words, start by looking outside our industry for better practices!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #25

An all too common, repeated mistake everyone seems to make is to only listen to the equipment and plate vendors.

Yes, many of you feel that you have developed a close and trusting relationship with them and they have witnessed many different operations. But the vendor’s goal is to make a sale, just as you do with your customers. The last thing they want to do is possibly threaten a future sale by directly challenging your practices and possibly upsetting you. They also tend to go with the latest popular practice that many consider industry leaders are embracing without truly understanding the pros and cons.

A great idea that may seem odd, but what about learning from someone who makes a living by giving advice and challenging your current practices: someone who’s actual, full-time occupation is to constantly read, review, and test the best practices within our industry and can teach your people better methods? A person, who, when offering advice, must back up the advice with proven methods that follow all the lean-manufacturing and time-study practices. Of course, I am speaking of myself. I am a lean-manufacturing consultant who has spent many weeks in each client’s operations, sometimes months, for over 100+ different companies. Just imagine the knowledge anyone could garner if they spent that kind of time in 100+ different companies, challenging their practices and offering solutions. One tends to learn from each consult and take that new information to the next. The most common statement I have heard from clients is, “You sure are not the typical B.S. consultant we have tried before. It is obvious to everyone you are a truss guy and know what you are talking about.”

Long story short, pride can blind us all from seeing and learning things for better bottom line results. Do not expect different results from doing the same thing, which is foolish. The truly smart thing to do is be smart enough to know that we do not know everything and that we should look to others to find that missing knowledge

Todd Drummond Consulting, LLC. Website: www.todd-drummond.com – Phone (USA): 603-763-8857 E-mail: todd@todd-drummond.com Copyrights © September 2017

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

www.todd-drummond.com

todd@todd-drummond.com

(603) 748-1051

 Total Recommendations  Actual Consultations (100+ Different Companies)  Testimonials of Past Clients with about 1/3rd that Provide a Written Public Recommendation (See testimonial web page)  Comprehensive and Refined Consulting Services with Proven Results

TDC has proven time and again that we are the go-to experts at reducing cost and improving productivity in all departments of wood truss and wall panel manufacturing. √ Consulting Services Tailored per Client Needs

Short and Long Term Full-Service Assistance*  Existing Operations All Department and Areas  Proven and Practical Methods for Better Productivity  Lean Manufacturing Principles Simplified and Tailored for Your Company  P/L Improvement and Turnaround*  New Startup Assistance and Prospectus Services* *TDC is Currently Seeking Long Term Commitment Client Companies *Limited Availability for 2018 Build Season √ Labor Time Standards for Accurate Truss Labor Estimations  120+ Different time elements to input into any truss program such as the MiTek MBA™, MiTek MVP™, Alpine™ or other programs. √ Multi-Page Review with Performance Spreadsheet for Linear Saws √ AppWright Software - Referral Agent for a Fantastic Web-Based Workflow, Scheduling, and Communication Software Widely Used by Wood Component Manufacturers, Lumberyards and Home Builders. √ Financial Service Referral Agent to an Expert Merger and Acquisition Financial Firm with Plenty of Experience that is Specialized for this Industry.

Go beyond the typical truss plate and equipment vendor recommendations for your operations and do what so many others have dared to do. TDC does not receive any equipment or plate vendor royalties. If your company is planning on any equipment investment, let TDC recommend your company the best and unbiased solution.

“Todd, You have a high opinion of the value of your services, and you are not bashful about charging. We have been building trusses since 1962. We believe our people are better than average; our equipment is as good as the best, our yard layout is adequate for our business and over all we questioned whether or not, considering what you charge, it would be worth it.

Not wanting to be too myopic we decided to spend some money and listen to you. I will make this note short. It was the best investment I ever made for our truss shop. I no longer think you are

expensive. You covered so much that we will be forever appreciative.”

Harold LaValley - Founder and Owner. - Newport, NH Corporate Office

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #27

Wood Truss Systems

TRUSS EQUIPMENT

manufacturers’

Representatives

NEW! Eagle TP600 C Clamps (Qty.: 4) Roof truss assembly equipment includes four (4) Eagle TP600 C-Clamp presses for 2x4 and 2x6 lumber. System includes trolleys, four (4) counter-balanced booms, four (4) pumps, 5.25" x 6.25" magnetized platens, pistol grip handle, boom-mounted pump with oil reservoir. Also comes with assorted spare parts. 220 volt, 1 phase electrical. $12,900 FOB MN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2014 Clark HVS-14 Stacking System Four unit horizontal stacking system consisting of four lifting units (2 master, 2 slave) with integral electronics. Features adjustable, truss-sensing lasers on slide rails for easy adjustment to stack any truss configuration. OEM control panel with PLC and manual controls, separate remote enclosure(s), and RFC hand-held remote control unit. Stacks 1 5/8" thick trusse to 14' tall, and up to 90' long in stacks of up to 30 trusses. Can stack four separate trusses of up to 56' each. Includes 122' OEM integrated out-feed conveyor consisting of 26 walk-through pedestals, [14] idle / [12] powered 1/3 HP gear-motor with individual starters and overloads (no pulleys, belts, etc.). Also includes all available spare parts.

480V, 3 Ph. power, Support and installation available from OEM. $124,990 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry

PHONE: 800-289-5627

12' Finish Roller Press Press was purchased used in 2006, painted and wired for service but never utilized.

An excellent press for smaller wood components including jacks and valley sets. 120V, 1 phase power. $6,490 FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Vertical Truss Stacker by Square 1 Manufacturing

CMF 12' Roof Truss Gantry System 75​'x 12' side-eject system (90' OAL with dual park area) f​ eaturing: 11 soft-top wood/ plastic, 12'x72" tables with Uni-Strut puckrails, (11) skate-wheel ejectors to powered transfer roller. Includes two (2) CMF 12' x 24" dia. gantries, one 1988 and one 2005, both with top-side riding platforms, two button motion control,​ for continuous top use (no aisles). includes crane rail with base-plate and all available jigging hardware, ​208v, 3ph power , electrical supply rail, and air-manifold included.​ $40,900 NOW $34,900 FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New, vertical stacker by Square 1 Design & Manufacture, up to six pedestals to handle up to 100 foot long spans. Features I-beam construction, holds from 10 to 25 trusses based on truss size, shape and weight, integrated drive tube for simultaneous stacking action and support during rotation, dual high-torque braking gear motors, adjustable tension clutch, heavy-gauge aluminum uprights with rubber bumper stops and automatic controls. The controls allow jogging the stacker both in forward and reverse directions and can be set up for multiple stacks of trusses. 440 volt, 3 phase electrical. Other voltages available. $31,067 BASE, FOB IN.

765-751-9990

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

NEW! Table Guided Gantry System by Square 1 Manufacturing

Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 NOW $19,900. FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

New, table-guided (NO rail) gantry system by Square 1 Design & Manufacture, sideeject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase electrical. Other voltages available. FOB IN.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

Service, availability and trust.

Now in a fire wall hanger.

Introducing the Simpson Strong-TieÂŽ DG fire wall hanger that installs before the drywall.

Designed for floor trusses, I-joists and 2x sawn lumber, DG fire wall hangers are tested and approved for two-hour fire-rated wall assemblies and feature a recognized fire test listing in Intertek’s product directory. This new fire wall hanger meets code and is backed by our engineering, testing, and prompt delivery.

To learn more, visit go.strongtie.com/firewallsolutions or call us at (800) 999-5099.

Š 2017 Simpson

Strong-Tie Company Inc. DGFIREWALL17

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #29

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

NEW! Gang Nail Modular Swing Press Gang Nail model 59200, 4’ x 15’, modular 50-ton swing press truss assembly system.

Presses dimensional lumber in 2" x 4" or 4" x 2" orientation. Includes 36" wide, stationary platen with hydraulic drive and joy-stick control. Opposite sides of table slide under press platen to set plates in lumber. 208V, 3 phase power. $27,990, FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Klaisler Receivers (14) Quantity of fourteen (14), air-actuated Klaisler receivers, 14 foot long, skate wheel conveyors with stands. Feature slotted side columns and air cylinders to move receiver arm. 30 1/4" from bottom of base plate to top of skate wheels. 100 PSI air required. $15,400. FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Mitek 14' x 85' Roller Gantry System with Planx Automated Jigging Mitek 14’ x 36” Gantry Roller with Floor Mounted Rail. (7) Mitek Slotted Top Tables with Automated Jigging & Skatewheel Ejectors. (20) 2009 Mitek Automated Truss Jigging Planx (51’-6” Build Length). (2) Planx Do Not Work. Planx Computer with Enclosure. (4) Walk-Thru Drilled & Tapped Tables with Unistrut Jig Slots & Skatewheel Ejectors. (9) Skatewheel Receivers with Stands. Excludes Exiting Conveyor & Finish Roller. 208 Volt / 3 Phase. $105,000 NOW $88,900 FOB IA Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

1993 Alpine Speed-Roll 47TW Floor Truss Machine •Steel Table with Kickleg Supports •Single Jig with Air Cylinder Clamping •Gantry Roller with Safety Bars & Ride Platform •Overhead Plate Rack •208 Volt / 3 Phase NOW $6,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Square 1 Vertical Truss Stacker

Virtek Model LPS-2DI Laser Projection System (IA) Twenty Four (24) Model LPS-2DI Red Laser Heads Computer with Environmental Enclosure Excludes: Virtek Software License & Service Agreement $36,000 for Complete System or $1,750 per Laser Head Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Engineered to operate through all seasons. Sumitomo High Torque Break Motor (no air or hydraulic unit to maintain). 35 Second Cycle Time. Each pedestal will hold from 10 to 25 trusses depending on truss size & weight. Floor Truss Stacker (stack 14’ to 50’ trusses). Roof Truss Stackers (stack 14’ to 50’ or 20’ to 70’ trusses). Agricultural & Large Residential Roof Truss Stacker (stack trusses up to 120’). Powered Outside Conveyor. Control Panel

800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

manufacturers’

Representatives

NEW!

Reconditioned Panel Clip TK-7 Press Reconditioned 10 Ton C-Clamp Press (Roof & Floor). New Pump, Relief Valve & Hydraulic Hose Beam Trolley. Excludes Overhead Beam & Jig Table FOB MO $4,500 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

New Square 1 Short Roof Truss Finish Press New, Square 1 “short” finish roller press (FRP), Four-foot wide (other widths available) x 1 1/2” tall throat. The unique “uni-body” construction creates a ridged machine that houses 12” diameter rolls, 7 1/2 HP motor with integrated brake, emergency photoelectric shut-off and 80# chain drive. This FRP features 114 FPM speed, emergency shut-off bars, and full chain and sprocket guards. Available options include: other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls. 480 volt, 3 phase electrical.

Other voltages available. $15,750, FOB IN

765-751-9990 Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #30

Can Technology Alone Cure Quality Issues?

T

here are many methods that are employed to help insure proper plate placement.

Perhaps no technology has had a greater impact than ink jetting truss components with plate size and location.

Ink jetting plate data can help you reduce necessary plate sizes resulting in plate cost reductions. With this being said, ink jetting plate data doesn’t get the job done if the truss builders do not understand and follow the prompts from the info. In the following situations, two issues are illustrated.

In photo 1, plate angulation - location was ignored. Post analysis required this plate removed (along with the stack of matching trusses) and re-plating.

Photo #1

In photo 2, the improper plate size was used. This is unfortunate, because post analysis indicated insufficient tooth count. These trusses also required rework.

Technologies will not eliminate errors. Rather, it is important to keep in mind that training and inspection are the best approach to quality trusses.

Photo #2 Glenn Traylor Structural Building Components Industry Consultant http://www.linkedin.com/in/glenntraylor PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #31

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

To uncover what’s possible, abandon what’s comfortable!

1997 Mitek Mark V Truss Press with 14' x 46' Table Mitek Mark V Gantry Press (Track Mounted) with 14’ x 3’ Platen 15 HP / 50 Ton Hydraulic Press 4 Wheel Drive 14’ x 46’ Drilled & Tapped Steel Table Unistrut Jigging at 24” Centers The truss ejectors have been removed The buyer is responsible for equipment dismantle The seller will provide forklift and forklift driver $37,500 NOW $31,500 FOB MD. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Fitzzgerald Group, LLC 2014 CMF Peak-Up Roof Truss Stacker 2014 CMF peak-up, vertical, roof truss stacking system with 3 HP drive system with new motor and gear reducer, autoindexing, receiver arms, holds up to (30) trusses from 16 foot to 50 foot in length, up to 14 foot height, with 22 second average cycle time. Adjustable bridge/arm starts cycling process, bundle indexes back 1 1/2" as each truss is stacked. Four lifting arms work in unison. Includes (80) foot of conveyor, consisting of (10) powered conveyors and (8) idler conveyors. Push button pendant controls. 480 volt, 3 phase electrical. Available to ship in May of 2017. $18,990, FOB MI. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

“A blending of excellent services and products, with answers that work”©

WoodRunner Conveyors Inc. Viking Walls MaxCustomCutter Wizzard PDS Drop-In Channels Gorbel Crane Technology Just a few or our profit enhancing parts that can make you whole!

630 Southpointe Court - #200 Colorado Springs, CO. 80906

719-528-5445 RFitzgerald@FitzGroup.com www.FitzGroup.com

First Fully Automatic Production Line for the Wooden Roof Truss Industry

WWW.TRUSSMATIC.COM PHONE: 800-289-5627

2017-04-24_lehtimainos_final.indd 1

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 24.4.2017 18.51

ONLINE EQUIPMENT PRICING

ONLINE ORDERING

AVAILABLE 24 HOURS

www.Square1Design.com Click on “Parts Store”

Booth

#B8C 19 MC 2017

Every Any truss sets up faster with WizardPDS® Automation.

WizardPDS® Retrofit in Pacific Tables.

cts!

New Produ 19

Booth #9

v

Eliminate setup time and ALL manual jigging. (2) Automated pins per channel. Easy to use software compatible with all leading truss design software and projection/laser systems.

Every truss you build sets up faster with WizardPDS®.

With over 300 systems sold, see for yourself what sets WizardPDS® Automation apart.

Wizard Ready AUTOPRESS 10RT Specialty Table ‒ Big table performance in a smaller footprint.

Wizard Ready UNIVERSAL Table ‒ Expands any existing table system, even discontinued models.

WizardPDS.® Your table, automated.

See WizardPDS® in Action!

We bring the best together!

Toll free 800-344-3433 Ph. 612-521-9193 Fax 612-521-9307 www.eideintegratedsystems.com Eide Integrated Systems, LLC PO Box 11397 / 3219 North Second Street Minneapolis, MN 55411-0397

All WizardPDS® Systems feature the patented Open-Channel design.

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #34

Adverti$er

Don’t Forget!

You Saw it in the

NEW TRUSS EQUIPMENT

NEW!

NEW!

Square 1 Trackless Roller Gantry System Trackless Roller Gantry System 24” Diameter x 3/4” Wall x 14’ Long Gantry Roller

•

4” Diameter Stub Shafts Supported by 4 Baffles

•

Dual 7.5 HP Sumitomo Gear Motors

•

(4) Drive Wheels Run on Top of Table with (8) 3” Osborn Cam Followers Under Table”

•

Soft Start” Inverter with Square 1 Easy ID Software

•

Flashing Motion Indicator Beacon Light

•

Greaseless, Maintenance Free Shaft Bearings

•

Front & Rear Emergency Shut Off Bar

•

•

Integral Mechanical Fail Safe Brake

Compact Design (59” Long x 42” Wide x 44” High)

•

Elevated Operator Platform

•

Positive Press Tight Abutment

•

230 or 460 Volt / 3 Phase

•

Hand Wheel Lumber Adjustment

•

Continuous Table (Steel, Plastic or Combination Top)

•

3 HP Sumitomo Gear Motor

•

Add $1,425 for 20’ Infeed & 10’ Outfeed Roller Conveyor with Stands

•

Liftouts for Side or End Eject

•

Table Mounted Electrical Track

Proven WizardPDS® Reliabilty, Durability and Design. Automated roof truss jig system that reduces set-up time by 99% . Requires NO additional jig hardware or images (laser projection) to accomplish a complete truss setup in 30 seconds or less! Retrofitting to your existing truss assembly table lowers your initial investment, immediately increases your margin and gives you a tremendous edge over your competition. Top and bottom chord stops spaced approximately 24” O.C. No jamming or debris build up with the exclusive and patented open channel design. Multiple set-ups per table Easy to use and compatible with all major design software.

Powered by WizardPDS® Gold Software with Optional Laser Integration. FOB SD.

Equipment Details: • Splices 2x3, 2x4 & 2x6 Lumber

•

Air Piping Manifold

•

Weg-It Jigging Hardware for Steel Top Table

•

Optional Wizard Ready Tables, Transfer Rollers, Exiting Conveyor, Finish Roller & Outside Conveyor. FOB IN | Inquire for Prices

Square 1 SQ-Series Floor Truss Machine (Table Guided)

NEW!

WizardPDS® Automated Perimeter Definition System

Square 1 RolSpicer Chord Splicing System Call for Pricing FOB IN

• •

•

3 to 4 Second Cycle Time

•

2 Recessed Simultaneous Activation Buttons

•

Guarded Motor & Sprockets

Buy Factory Direct From Wasserman & Associates for the same price as the Manufacturer PLUS get the added support and care you need to be up and running FAST! We’ll even help sell your used equipment too!

•

24” Diameter x 3/4” Wall x 6’-6” Long Gantry Roller •

6’-6” Wide x 40’ Long Steel Table (2-20’ Sections)

•

CNC Plasma Cut 3/4” Steel Table Top

•

3 7/16” Diameter Continuous Shaft Supported by 3 • Baffles • 1” Laser Cut End Plates with Internal Structural Tube • Frame • Spherical Roller Bearings

•

Twin 7.5 HP Sumitomo Gear Motors

•

•

• (4) Drive Wheels Run on Top of Table with (8) 3” • Osborn Cam Followers Under Table

•

120’ per Minute Adjustable Working Speed

•

”Soft Start” Inverter with Square 1 Easy ID Software

•

Flashing Motion Indicator Beacon Light

•

Front & Rear Emergency Shut Off Bar

•

Chain & Sprocket Guards

•

Integral Mechanical Fail Safe Brake

•

230/460 - 3 Phase

Supported by 6” x 4” Steel Tube Frame Clamping Rails & End Stops Built-In 1/2” True Arc Camber to Both Clamping & Side Rails Electrical Track & Air Cylinders are Under the Table Build up to 40’ Floor Trusses with Option for Additional Length

•

Floor Truss Depths from 9” to 26” with Option for Additional Depth

•

Optional Pop-ups, Flip Jig (shown in photos) & End Eject (shown in photos)

•

Add $3,680 for Installation Supervision

FOB IN | Call for Pricing

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

More than history, the TURBO Drive is German engineered to allow for maximum performance in a given application. With this base, precision performance is improved with software optimization rather than hardware changes.

This is apparent when the TURBO Drive was optimized for USA component cutting, the same world model saw runs significantly faster, simply by optimizing movements and stroke.

For a demonstration of how software upgrades accomplish this, see the “before & after” video at: https://youtu.be/3V5gmXbjQPU. It illustrates that software can increase throughput rather than redesigning elements of the equipment, your TURBO Drive does not become yesterday’s news because of a model number change.

FOR A DEMONSTRATION OF HOW SOFTWARE UPGRADES ACCOMPLISH THIS, SEE THE “BEFORE & AFTER” VIDEO AT: https://youtu.be/3V5gmXbjQPU

So how much would you pay for software that increases your cutting productivity and keeps your saw current with the latest technology?

How about zero? With the Hundegger TURBO Drive, free software updates for life are included with the saw. As software is optimized and performance is enhanced, you’ll never have to worry about what model you bought. For more information, visit http://www.woodtrusssystems.com/ manufacturers/general/hundegger-usa/

ÜÜÜ°7 `/ÀÕÃÃ-ÞÃÌi ðV ÊUÊÇÈx Çx£ ä

FLEXIBLE EFFICIENT ACCURATE Truebuild® Layout is an entirely new truss design platform by Eagle Metal, developed in the powerful & proven parametric modeling environment. Design modifications are automatically populated throughout the model for precision accuracy.

To maximize designer efficiency, multiple input methods can be used, including conventional UDLR, Reference Dimensions and tracing via DXF, DWG or PDF files.

SOFTWARE SUITE

Learn more at eaglemetal.com or give us a call at 800.521.3245

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #37

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Two C-Clamp Presses with Unistrut Jig Table •2006 Mitek TK8 Klincher C-Clamp Press •Used Panel Clip Klincher C-Clamp Press •10 Ton C-Clamp with Trolley •Press Roof (2x4) or Floor (4x2) Trusses •115/230 Volt - 1 Phase - 2 HP Motor •Unistrut Jigging and Stands (build two 40’ trusses at the same time) •Add Third Panel Clip Klincher C-Clamp Press for $5,000 $19,500 FOB SD Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1997 Pacific Automation 14' x 62' Roller Gantry System Pacific Automation AutoRoll 14 TR Roller Gantry (track mounted). 8 Each - Pacific Automation Walk-Thru Tables (drilled & tapped top) with Skatewheel Ejectors.

Add $10,000 for Mitek Powered Exiting Conveyor with Skatewheel Receivers (9 powered rollers, 10 idle rollers, 8 receivers).

Excludes Finish Roller & Outside Conveyor. $37,500 FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

EMSI Complete Mechanical Repair IDACO WEBMATIC

Keep what’s working for you,

Working for you.

Klaisler 14' x 80' Side Eject Roller Gantry System • •Klaisler 14’ x 24” Diameter Gantry Roller (Track Mounted) • •12 Each 6’ x 14’ Steel Framed Plastic Top Tables with Ejectors • •460 Volt / 3 Phase $49,500 NOW $44,500 FOB MD. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Our Service Department offers COMPLETE service, repair, rebuilding & retrofit services; in-house or on-site.

1992 Clark Industries 14' Tri-Axis Press with Kick-Leg Table Model 4000 Gantry Press (14’) with Joystick Control, Ride Platform & Floor Track. 20 HP Hydraulic Pump Motor. 16” x 19” Pressing Platen. Kicklegs & End Stands for 12’ x 50’ Table. Combination Steel/Wood & Plastic Top with Jig Bars $28,000 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Eide Machinery Sales’ Complete Mechanical Repair, with or without cosmetic repair, includes: ▶ Replacement of ALL drive train components ▶ Motor Brakes ▶ Bearings ▶ Chains ▶ Sprockets ▶ Shims ▶ Wear Strips ▶ Push-button Controls ▶ Electrical Harness ▶ Scales ▶ Gauges ▶ Calibration and Testing ▶ Warranty

−2

0 17

.

IN

27

AT

We know machinery.

E

INC

EIDE

INERY SAL

S,

M

90 H AC

R

PHONE: 800-289-5627

Alpine Mighty Mite Press 6’ x 29’ Table. Hydraulic Press with Ride Platform. 480 Volt / 3 Phase. The motor and several of the hydraulic components have been replaced in the last couple of years.

Video available upon request. $6,900 NOW $4,950 FOB MI. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

EB

$22,500 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Serving the Wood Product and Fabrication Industries ~ Since 1927

CEL

Jager 1235 Travelmatic Press & Tables • Jager Hydraulic Press with Ride Platform (Track Mounted) • 11 Each - 12’ Tables with Unistrut Jigging • Tables can be lifted & relocated with the press • Pop-Up Rollers (end eject) • Outside Conveyor with Peak-Up Stacker

G 9 0 Y E A R S!

19

Machinery ~ Supplies ~Since 1927~

Toll free 800-344-EIDE | www.eidemachinery.com 3219 North Second Street Minneapolis, MN 55411-0397

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #38

Improve Your Production Processes and Say “NO” to Waste Part 7 in our TIMWOODS series Ben Hershey, President, Coach, & Mentor 4Ward Consulting Group, LLC

Reducing Over-Processing is a critical part of creating an efficient lean production/distribution company. As our friend Tim

Woods has been guiding us through our lumber yards, manufacturing operations, and offices, we’ve seen a lot of wastes. Now it’s time to address the second Big O – a very big source of waste which can be a significant drain on our businesses.

Over-Processing Overproduction is making products in too great a quantity or before actually needed, leading to excessive inventory (WIP/Work In Process). Likewise, over-processing is doing too much and taking too many steps. Although they are separate ideas, both can be thought of as two halves of the problem of “too much.” They are contrary to basic principles in Lean manufacturing which require that you make what the customer wants when they want it, pulling only what is ordered through your work flow. In addition, these wastes can obscure other problems within your processes.

Costs of the Waste of Over-Processing What are some of the costs? If you avoid addressing over-processing, it can: • Cause you to tie up your capital in stock, raw materials, WIP, and finished goods.

• Require additional space on the production floor or in the lumber yard.

• Necessitate people and equipment to move it around as well as containers for storage.

Causes of the Waste of Over-Processing When you walk in the yard or plant, why do you see so much overprocessing? Many times what I hear is, “this is how we have always done it!” Over the years, I have been to numerous companies that run huge batches of material, creating enormous amounts of WIP when they instead should reduce the batches, improve their flow, reduce lead time, and improve customer service.

In general, over-processing is caused by: • Large batch sizes • Unstable schedules • Unreliable work processes • Unbalanced or mis-scheduled cells or departments • Working to a forecast/inaccurate information that is not actual demand.

Like overproduction, there are logistical and psychological causes. Often we produce large batches because of long setups on some of our machines, so we try to maximize our throughput of these machines and use “economical batch quantities” to dictate how much material is processed rather than what the customer wants. Other times we do not have reliable suppliers and so we “stock-up” on the supply we need. And finally, we have unreliable processes and schedules which cause us to plan for delays, plan for disruptions, etc.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #39

How to Eliminate or Reduce Over-Processing For starters, literally go see for yourself what you can uncover. Walk the yard and plant, see where your team is building in this over-processing (and overproduction), and begin to eliminate it. A few ideas to help you start reducing these wastes in your operation are: • Realize you are doing it! We all need to understand that we often plan our own delays and large batches just because we always have done so.

• Tackle set-up times on equipment to enable the production of smaller batches.

• Implement the principles of lean manufacturing and identify the value stream using tools such value stream mapping, process mapping, spaghetti diagrams, and other analytical tools which we can help you with.

The TIMWOODS Journey Identifying waste and eliminating it from our operations is a critical part of every Lean journey. We have enjoyed working through the various wastes that occur in lumber yards, millwork plants, and our component yards, and we have now addressed 7 of the 8: T-Transportation, I-Inventory, M-Motion, W-Waiting, O-Over-Production, O-OverProcessing, and D-Defects. Next up, we will tackle S-Skills. In the meantime, I invite you to go back and reread the series, and if you need additional help, it would be our pleasure to assist you.

Best Practice Tip – Attend the Show This year’s BCMC Show is just around the corner, and if you have not signed up, it’s not too late. This year is going to be one of the biggest and best shows we have had to date. With more exhibitors and awesome educational sessions, you are certain to see a positive return on your investment. This year, we have 10 different educational sessions which cover many aspects of your operation.

In addition, there is a pre-show seminar on risk management, a plant tour, golf outing, 5K, bike ride, and much more. Register today and join me and so many more who find this the most valuable show you will attend. You can find 4Ward Consulting Group in booth #1312 along with many other great exhibitors.

Please stop by to say Hello as you walk the floor. See you there!

Ben Hershey is CEO of 4Ward Consulting Group, LLC, the leading provider of Management and Manufacturing Consulting to the Structural Component and Lumber Industry. A Past President of SBCA, he has owned and managed several manufacturing and distribution companies and is Six Sigma Black Belt Certified. Ben has provided consulting to hundreds of Component Manufacturers, Lumber Dealers, and Millwork Operations in the past seven years. He is highly recommended by customers and leaders throughout the industry. You can reach Ben at ben@4WardConsult.com or 623-512-6770.

© 2017 4Ward Consulting Group, LLC

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

NEED EQUIPMENT? Tri-Axis Truss Press Continuous Style Table System •

100% Nail Plate Embedment on the Assembly Table

•

Single or Dual Hydraulic Pressing Cylinder Capability

•

Up to 60 Ton Pressing Capability

•

Presses 2x or 4x Without Any Adjustments

•

Standard Gantry Throat Widths from 8 to 16 Feet

•

Patented Joystick Controls

•

Ease of Maintenance

Tri-Axis Truss Press Walk-Thru Style Table System • • • • • • •

Aisles Ease Access to Trusses 100% Nail Plate Embedment on the Assembly Tables and on the Aisle Bridges (20" Aisles) Single or Dual Hydraulic Pressing Cylinder Capability Up to 60 Ton Pressing Capability Presses 2x or 4x Without Any Adjustments Standard Gantry Throat Widths from 8 to 16 Feet Ease of Maintenance

Heavy Duty Jack Table Press • •

• • • •

www.clark-ind.com

100% Nail Plate Embedment on the Assembly Table Dual Pressure System 30 Ton on Low 60 Ton on High (ex. Cap. 10" x 12" Nail Plate) Press 1x, 2x, 3x and 4x Dimensional Trusses 4, 5, 6, or 7 Feet Wide Options 20, 24, or 30 Feet Long Options Joystick Control Left/Right Operation

816 Callan Street, Monett, MO 65708 Phone: 417-235-7182 Fax: 417-235-8262 Email: general@clark-ind.com

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Wood Truss Systems

manufacturers’

Two 2005 CMF 14’ x 65’ Truss Lines with Center Conveyor & Finish Roller 2 Each - CMF Stealth 14' Roller Gantries (Track Mounted). 16 Each - Steel Slotted Top Walk-Thru Tables with Skatewheel Ejectors. Powered Exiting Conveyor with Skatewheel Receivers. CMF Stealth 14' x 24" Diameter Finish Roller. Excludes Outside Conveyor. Add $12,500 for 2007 Laharco Sense-A-Plate Plate Detector. $110,000 FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Representatives

1994 Klaisler 14’ x 110’ Side Eject Roller Gantry System (2) Klaisler 14' x 24" Diameter Gantry Rollers with Floor Mounted Rail. (14) Plastic Top Tables with Unistrut Jigging & Skatewheel Ejectors. Drilled & Tapped at Bottom Chord. Powered Exiting Conveyor.

Tee-Lok 14' x 24" Diameter Finish Roller.

Idle Outside Conveyor. Custom Built PeakUp Truss Stacker. $112,500 NOW $ 99,900 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1995 Klaisler Side Eject Gantry System

M ACdverti$er

Th e

September 2017 #10218 Page #41

omponent

anufacturing

Serving the Structural Building Components Industry

160’ x 14’ side-eject system with Koskovich Jet-Set auto jigging tables. Features (11) plastic top Jet-Set combo tables with skate wheel ejectors and (7) plastic top 56" Klaisler tables with skate wheel ejectors with 15" aisles and 4' OC Jet-Set pucks. Includes (2) Klaisler GR14-24 24" recessed rail gantry with riding platform and soft start, Klaisler 24" final roller, (16) powered conveyor rollers and (16) idler rollers. includes all available jigging hardware and bridge plates. The Jet-Set needs to be calibrated and one of the gantry heads needs new electrical i​nvertor. 230v, 3 phase electrical power.

NOW $39,490 FOB OH 765-751-9990

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

NEW!

NEW! New Component Table with Skatewheel Conveyors • Lift & Extend Skatewheel Conveyors • 10’ x 10’ Work Area with Squaring Lip • Gun Holster & Nail Tray

$8,250 FOB NE 800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

New Square 1 Short Roof Truss Finish Press Four-foot* wide x 3 1/2” tall throat. The unique “uni-body” construction creates a ridged machine that houses 12” diameter rolls, 7 1/2 HP motor with integrated brake, and 80# chain drive. This FRP features 114 FPM speed, emergency shut-off bars, and full chain and sprocket guards. Available options include: Other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls available at an additional charge. 208, 240, 480 volt electrical. $15,750 FOB IN

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

You Saw it in the

Adverti$er

WALL PANEL EQUIPMENT

1999 Triad Custom 2-Station Wall Panel Equipment Special built, 1999 Triad combo framing table with Gen II sheathing table, 20tool nailing bridge, router bridge and all available floor grating. Builds walls from 4'-0" to 14'-2". Includes pop-up conveyors, 16" & 24" stud locators. Sheathing bridge includes side-shift feature, push-button controls, manual bridge travel. Router bridge includes router. No tool dollies, fastener tools or tool mounts included. OEM parts are available at additional cost. 120 volt, 1 phase electrical. 100 PSI air required.

Price: NOW $13,990 Location: IL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

DeWalt Panel Saw Vertical panel saw, 10 foot long, utilizes 13 amp 120v industrial saw motor, DeWalt circular saw with 8" blade, crosscuts material up to 64" wide and 1 1/2” thick.

Included PDF service manual. $2,100 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Triad "Diamond Quad" Wall Panel Line (Enlarge Picture for Details) Triad “Diamond Quad” Framing Table with Tool Dollies. 20’ Roller Conveyor with Stands. Triad “Diamond Quad” Squaring Table with Multi-Tool Bridge.

Excludes Nail/Staple Guns. The equipment is currently stored in a trailer. The trailer can be purchased for an additional $2,000. $17,500 FOB WI. pdf link for photos Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

September 2017 #10218 Page #42

Don’t Forget!

Read/Subscribe online at www.componentadvertiser.com

2010 Gorbel Crane System Gorbel freestanding crane system, 2,000 lb weight limit, 14 foot x 28 foot working footprint, 16'-3" hoist hook height, festoon electrical supply cord. 480 volt, 3 phase electrical. $12,490 FOB TX. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2010 Gorbel Freestanding Crane System Price: $12,490 Condition: Good Location: CA Gorbel crane system includes 480V, 3Ph, RM Chain Hoist and Panels Plus panel lift.

Crane system and hoist rated for 2000 lb lift capacity. S/N: 301288.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders.

Stainless Steel Push-In Air Line Fittings.

Water Separator & Regulator with Gauge. $16,500 FOB MO. Wasserman & Associates 800-382-0329

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry

FAX: 800-524-4982

VERTICAL ROOF TRUSS STACKERS

HORIZONTAL ROOF TRUSS STACKERS

HORIZONTAL WALL PANEL STACKERS

866-647-7771

Sales@Square1Design.com

www.Square1Design.com

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #45

WALL PANEL EQUIPMENT

2010 Panels Plus 16’ x 12’ Sheathing/ Squaring Table with Single Beam Multi-Tool Bridge with Plate Stitchers Model 40003 sheathing/squaring table features foot pedal power control at squaring end of table. Squares wall from 7’ to 12’ heights and up to 16’ in length. 12” wide roller conveyor on both sides, with squaring stops. Bridge is a 2010 Panels Plus SingleBeam Bridge W/Plate Stitchers featuring a single pendant control of the bridge with power drive with auto return. Single beam, multi-tool bridge features 24 primary tools with spacing on 6” centers. Tools have a variable shift of 3” to 6”, and 2” to 4” to accommodate offset nailing at sheathing seams. Bridge function also includes four manually adjusted stitcher tools. Two standard top and bottom plate stitchers, and two adjustable tools for common top and bottom side of openings (such as windows) Standard 3 position tilt for seam nailing, hand-crank on tool bridge for precise stapling/nailing, laser sight line. Requires minimum 60 CFM at 120 psi, 120v single phase electrical service. $39,490 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

“Serving the Component Industry Since 1996” 2009 Panels Plus Sub-Component Nailer Panels Plus sub-component nailing station, model CN 100, touch screen operation with "quick motion" setups, two-tool indexing tool carriages, foot pedal tool firing control.

Maximum nail height of 12 inches x 27" width. Designed to provide clearance for larger, coil-fed tools. Includes (2) 12 footlong x 27 inch wide idler roller conveyor sections without legs. Sold for over $28,000 new. 120 volt, 1 phase electrical. 90 PSI minimum air requirement. $14,990.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Now offering short term Working Capital Loans

Start smarter...

Grow faster...

Achieve more...

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108 Phone: 412-262-3225 Fax: 412-262-1154

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M m ACdverti$er

Th e

omponent

anufacturing anufaCturing

Adverti$er

Don’t Forget!

You Saw it in the

November September 1st, 2015 2017 #10218 #08196 Page #46 #24

New Productivit Wall Panel Manufac PHONE: 800-289-5627 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 FAX: 800-524-4982

M m ACdverti$er

Th e

omponent

anufacturing anufaCturing

You Saw it in the

• • • • • • • • • • •

PHONE: 800-289-5627 PHONE: 800-289-5627

Adverti$er

Don’t Forget!

•

ty in cturing

November September 1st, 2015 2017 #10218 #08196 Page #47 #25

FEATURES One Tool System (Change from Staples to Nails in Minutes) Programmable Fastener Patterns wit PLC Touch Pad Entry Accommodates 2”x4” and 2”x6” Walls Straight Line Stitching Away and Towards You Bridge Tilt at Sheathing Seams to Eliminate “Shiners” Adjustable Bridge Speed for Accurate Alignment Auto Return to Park Section on Tool Bridge Laser Pointer for Identifying Fastener Placement Powered Height Adjustment (8’ to 12’ Wall Height) Pop-up Skate Conveyor Cantilever Table Which Allows Floor to be Free of Obstacles Optional Stud Locators

$72,500 $67,500

Installation Support Available in the US & Canada

See More On-Line at

www.wasserman-associates.com Ph: 800-382-0329

Fax: 402-761-2422

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

WALL PANEL EQUIPMENT

September 2017 #10218 Page #49

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

manufacturers’

Representatives

NEW! Triad AutoCol Sub-Component Nailing Station Triad model "AutoCol" sub-component nailing station with infeed and outfeed conveyors. Builds stud-block-stud, L's, T's, headers and trimmers/jacks. Touch screen controls, laser pointer, runs in manual or batch mode. Conveyor infeed and outfeed tables are each 6' wide x 10' long x 34" height (adjustable height) with 15" long roller conveyors. Twelve (12) tool stations, six per side. Internal transformer for PC included. Tools and mounts not included.

100 PSI air and 208 volt, 3 phase electrical. $15,990, FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

CLICK HERE for more information New Panels Plus Wall Panel Framing Equipment

Consider Panels Plus wall panel assembly equipment for manufacturers of wood or steel wall panels, floor-panels, and related framing components. Panels Plus is an employee owned, ISO certified, manufacturing company that builds state-of-the-art equipment featuring durable construction, with fit and finish second to none in the structural building component industry. The referenced base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches.

This framer design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality.

Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages.

Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge.

Squaring stations, sub-component tables, conveyors and panel lifts are also available to complete the configuration of the wall panel assembly line. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical.

765-751-9990

www.woodtrusssystems.com

SQUARING TABLE WITH MULTITOOL PANEL BRIDGE

Triad Exterior Wall Panel Line Triad GEN II Framing Table (No Tool Dollies or Nail Guns) Stud Locators and Pop-Up Skatewheel Conveyor on Framing Table Triad GEN II Squaring Table Triad GEN II Sheathing Table with MultiTool Panel Bridge Tool Mounts at 6” Centers with 3” Shift on Panel Bridge (Excludes Nail/Staple Guns) Wall Panel Lengths to 16’ Powered Height Adjustment (6’-9” to 12’-2” wall heights) Electric Hoist with Wall Panel Lift 3 Sets of Roller Conveyor with Stands Excludes Red Component Table and Floor Mounted Roller Conveyor (FOB KS) $38,900 Wasserman & Associates 800-382-0329 www.wassermanassociates.com

M ACdverti$er

The

omponent

anufacturing

Serving the Structural Building Components Industry PHONE: 800-289-5627

Wall Panel Lengths up to 16’ Powered Height Adjustment (3’-11” to 12’-3” wall heights) Manual Squaring Stops Single Beam Panel Bridge (excludes nail or staple guns) Top & Bottom Plate Stitchers (excludes nail or staple guns) Used Roller Conveyor with Stands are available at additional cost EQUIPMENT FINANCING available from SLS Financial Services Print Details

Used IBS Interior/Exterior Wall Panel Line FRAMING TABLE Wall Panel Lengths up to 20’ Powered Height Adjustment (3’-11” to 12’-3” wall heights) Pop-up Skatewheel Conveyor Stud Locators at 16” & 24” O.C. Excludes Tool Dollies & Light Bar

SQUARING TABLE WITH ROUTER BRIDGE Wall Panel Lengths up to 16’ Powered Height Adjustment (3’-11” to 12’3” wall heights) Manual Squaring Stops Router Bridge (excludes router motor)

Uploaded PDF: IBS Squaring Table with Multi-Tool Bridge Literature.pdf

$39,500 NOW $36,500

FOB KS

800-382-0329 | www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

LASER ACCURACY. INCREDIBLE VALUE. NO SERVICE AGREEMENTS.

SL Laser never makes customers sign a costly service agreement. All service and installation is taken care of from SL’s North American headquarters in Charlotte, NC. No-excuse customer service from SL earns praise from their customers without signing an annual agreement. Isn’t that the way it should be?

GREEN LASERS ARE SIGNIFICANTLY EASIER TO SEE THAN RED LASERS. SL LASER’S ADVANCED COOLING OF THE DIODE INCREASES THE LIFESPAN OF THE HEADS.

Today’s laser technology saves time and improves quality in producing roof truss, wall panel, and floor panel elements. SL Laser combines technical ingenuity and years of wood component industry experience to deliver a package that provides easily measurable savings. Setup times are dramatically reduced, production processes are simplified and quality improved. Easy to control and virtually maintenance-free devices ensure the safe flow of your production and have a fast return on investment. SL Lasers work seamlessly with any structural component design software.

SL LASER HEADS ARE SIMPLE TO MOUNT AND CAN WORK WITH NEARLY ANY CEILING HEIGHT OR CONFIGURATION.

For over 15 years Wood Truss Systems has been a driving force in implementing laser projection in component plants throughout North America and beyond. Let us develop a custom configuration and complete price quote for your facility, and see how worldclass laser technology can work for you to increase margin and quality while reducing set-up times on your most complicated components by as much as 70%.

LASERS IMPROVE ACCURACY AND PRODUCTIVITY OF ANY WORK FORCE. IT IS THE EASIEST AND MOST COST EFFECTIVE WAY TO GET GREAT RESULTS, REGARDLESS OF EXPERIENCE OR LANGUAGE.

www.WoodTrussSystems.com • 765-751-9990

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

TRUCKS & TRAILERS

September 2017 #10218 Page #51

Wood Truss Systems

manufacturers’

Representatives

NEW! 1990 Ford F800 Truck with 1982 Barns Truss Trailer

2001 Sterling L9500 with Rand Rolloff Bed 2001 Sterling model L9500 straight body truck with Rand 26 foot long, 96 inch wide roller bed, 310 HP Cummings engine, Eaton Fuller 10-speed transmission, 33,000 GVWR, single rear axle, 200,000 miles.

Roller bed tilts with controls (gravity offload) located in truck cab and includes pop-up rollers, headache rack and ships up to 36' long trusses. Two front tires are new.

Half tread on the balance of tires. Half tread on brakes. DOT expired in March of 2015. $38,990 FOB CT. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

•Low Mileage Unit in Good Condition FANTASTIC DEAL! $9,900 FOB CA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Precision Stretch Roll-Off Trailers

Precision ​Equipment ​Manufacturing​has evolved with the wood component industry over the past 15 years and is emerging as the premier trailer and​roll-off trailer suppliers in the industry. From vastly improved manufacturing standards including establishing in-house finishing (sandblasting and paint) to investing in facilities capable of producing world-class delivery systems Precision is living up to their name. Their ​truss delivery​ designs are based on y​ ears of experience i​n delivering component packages for area manufacturers. Best practices are coming together to deliver a first-rate equipment and even better customer service​to insure your deliveries are made reliably and safely throughout the life of your Precision trailer.

Price based on configuration, FOB ND.

765-751-9990

1996 ASI 48'-70' Stretch Roll-Off Trailer •Sliding Tandems •Hydraulic Neck •Tires are good •DOT is current $22,000 NOW $17,500 FOB IA. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1994 Dorsey 48’ Flatbed Trailer •48’ Long x 102” Wide •Tandem Axle •Steel Wheels •Headache Rack •Winches & Straps •2 Trailers Available $7,500 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com Misc.

www.woodtrusssystems.com

• • • • • •

NEW! 2017 Precision Equipment Roll-Off Trailers

2000 Haulin' T-30 Rolloff Trailer Condition: As-Is, Where-Is 2000 Haulin' rolloff truss trailer, 48 foot long, sliding tandem axles, fifth wheel tractor connection, hydraulic lift, locking rollers, lights in working order, 70% tire tread and 60% brakes. $11,990 FOB MN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

Used Hain Vent Block Drill •5 HP / 230 Volt / 3 Phase Motor •Accommodates 2x4 thru 2x12 Block Sizes •Drill 1, 2, 3 or 4 Holes •Short Incline Waste Conveyor •Video available upon request $6,950 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System. Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting. Mesh Between All Rollers. Patented Load Lifts. LED Lighting System. Extend-a-Rail. 4" x 35' Load Straps. Patented Strap Locks. Strap Winches. Dove Tail on Rear of Trailer. Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers. Sliding Winch System.

Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

4Ward Consulting Group

With more than 25 years of experience, we know how to empower performance in businesses through...

Business Development

Lean/5S Processes

Coach/Mentoring Best Practices

Business Analysis & Benchmarking

Helping Organizations Excel

Turn to the company who is recommended by the top executives and professionals throughout the LBM, Component and Wood industry.

4Ward Consulting Group, LLC

Phone: 623.512.6770 E-mail: ben@4wardconsult.com LinkedIn: www.LinkedIn.com/In/BenHershey Facebook: https://www.facebook.com/4wardconsulting Blog: www.4WardConsult.info

Boots on the Ground Consulting—Focused on Your Business Success

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #53

Adverti$er

Don’t Forget!

You Saw it in the

TRUCKS & TRAILERS

Wood Truss Systems

manufacturers’

2006 Stoll 28' Gooseneck Roll-Off Trailer •Two 12,000 LB Axles (GVWR 13,900 Lbs) •Hydraulic Pump & Hoist •Electric over Hydraulic Brakes •Brakes & Tires have 70% remaining •Locking Rollers •2 Rollers on Gooseneck •Winches & Straps $16,900 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Representatives

NEW! 1990 Wabash 47-70 Foot Stretch Roll Off Trailer 1990 Wabash model SE, 47 to 70 foot stretch roll-off trailer, fixed tandem axles, fifth-wheel tractor connection, sloping bed/ gravity offload, locking rollers with brake control, ABS brakes, current Indiana DOT inspection (March 2016), 1/2" to 3/4" deep tire tread. $18,990, FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Precision Gooseneck Trailer Precision 36 foot gooseneck trailer​s​are designed to ​deliver ​smaller truss loads or​ trusses into l​ ocations that are not typically accessible with longer truss trailers. Standard features include​: Hydraulic roller load control, electric over hydraulic disk brakes, self-contained power unit, 5" rollers with 2 foot on-center-spacing, sealed ball bearings on rollers, roller on top of gooseneck, 12" x 19" w-beam frame and gooseneck, mesh between rollers, rear dovetail, 4" winches, 2 spring loading landing legs, patented strap locks, 10,000# also axles, and dual wheels.

Options include 5th wheel coupler, 4" x 35' load straps, air ride suspension, and electric over hydraulic drum or disk brakes.

1997 JDH Trussmaster 36’-50’ Mini-Stretch Roll-Off Trailer Hydraulic Front End. Fixed Tandems (trailer has gradual slope). GVWR: 26,000. Electric Brakes. Expanded Metal Flooring Between Rollers. Winches & Straps. $12,000 NOW $10,900 FOB GA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Modular Home Transport Trailers THREE (3) 1990 SPECIAL CONSTRUCTION MODULAR TRAILERS - $9,000 EACH 44’-7” to 57’-7” Expandable Trailer (5’ Rear Extension, 8’ Front Extension) Top is 7’8” 5 Sets of Pullout (Adjustable to 14’ Wide) 40,000 Lb GVWR (12,150 Lb Trailer Weight) FIVE (5) 1977 THRU 1979 MINUTE MAN MODULAR TRAILERS - $7,500 EACH 44’-7” to 57’-7” Expandable Trailer (5’ Rear Extension, 8’ Front Extension) Top is 7’8” 5 Sets of Pullout (Adjustable to 14’ Wide) 4 Each - 36,000 Lb GVWR (12,150 Lb Trailer Weight) 1 Each - 50,000 Lb GVWR Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Precision gooseneck trailers also come in 32' length and 101" width.

$29,500 Nicely Equipped, FOB ND 765-751-9990

www.woodtrusssystems.com MISC.

2005 Freightliner Columbia Truck (TX) •Diesel Engine •Single Axle •Cruise Control •Air Conditioner •274,000 Miles $23,000 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Cresswood Horizontal Grinder www.carolinamachinerysales.com (704)288-1904

2004 Kenworth T800 Day Cab Tractor • 190,696 Miles Precision 48” Chip Pack • 370 HP Engine www.carolinamachinerysales.com • 10 Speed Transmission (704)288-1904 • Aluminum Wheels with Good Rubber $35,000 FOB MD Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

Cresswood Horizontal Grinder www.carolinamachinerysales.com (704)288-1904

Weima 25 HP Grinder www.carolinamachinerysales.com (704)288-1904 FAX: 800-524-4982

120 Volt AC

Rapid Stop Ink Jet Marker $43,222.00 Marks, Cuts & Labels Wall Panel Plates Includes: Automation, In-feed & Out-feed 600 DPI RESOLUTION

Tables, Chop Saw Freight, Customs & Installation

Call Now For Pre-Order Discounts +1-800-382-0329

+1-765-751-9990

Sales@Wasserman-Associates.com

Info@WoodTrussSystems.com

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #55

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

manufacturers’

Representatives

Wood Runner AirPick

A

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

The next generation Wood Runner® AirPick™ is a giant step forward in automated lumber retrieval systems and is up to 30% faster than the old screw-driven system.

The old style lumber retrieval system used screws to pick up lumber, but the AirPick has found a new faster, better way with suction. As a totally automated system, the AirPick eliminates the costs and limitations associated with manually fed saws. The AirPick is incredibly safe, with active monitoring of the work area, the gantry can slow or completely stop itself to avoid people wandering into the work area. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Miser, Alpine's ALS, Hundegger TURBO, Monet DeRobo, and other linear saws. Feel free to watch our videos and click on any photo to see additional shots in our gallery. For more information regarding this new innovative machine, get back to us by phone or e-mail! From $124,900 FOB MN.

765-751-9990

www.woodtrusssystems.com

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

FOR REAL INNOVATION, NO ONE BRINGS MORE TO THE TABLE THAN US.

WOOD RUNNER® BRAND MACHINERY NOW INCLUDES: The improved AirPickTM Lumber Retrieval System and new for 2017: FastFrame™ Wall Panel Marking Saw

On your production table and throughout your plant, Wood Runner® wood manufacturing equipment combines unmatched technology and innovation to deliver greater productivity where you need it most. From our AirPick™ lumber retrieval system to our FastFrameTM wall panel marking saw, and in other advanced new products we’re developing, you’ll find a passion for doing things better with performance enhancements to match. Contact us and let’s see what we can bring to the table for you.

Visit www.woodrunner.com or call 507-322-3700 to learn more today. ®

A

Th e

Component Manufacturing dverti$er

You Saw it in the

Adverti$er

MISC.

Alpine Lumber Carousel Alpine model 407A, lumber carousel features (7) lumber bays each with 14 ft. max lumber lumber length (without overhanging the bay). Hydraulic drive with reservoir, 40' working diameter. 480v, 3 phase, 30A electrical. See video link and PDF shown with this listing. $9,690 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 Challenger Wood Grinder Model CH200-3037-S. Vibrating Infeed Conveyor. Oufeed Material Blower. Motor: 27 KW Brook Hansen (480 Volt / 3 Phase).

Cutters: Small FIXCUT @ 58. Screen: 1/2” @ 2 Sections. NOW $13,900 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Alpine Lumber Carousel - NC HD carousel feed system with 7 stations, handles material to 16’. Includes toggle controls and 10 HP motor to power systems hydraulic power unit. $9,680 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Four Arm Infeed Deck Price: $7,890 NOW $3,990 :: FOB PA 10' long x 10' wide 4-arm infeed deck, powered by a 1 HP motor, prism chain feed and deflector pans. 230/460 volt, 3 phase.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

September 2017 #10218 Page #57

Don’t Forget!

UsiFab Chord Splicer UsiFab chord splicer splices 2"x3" through 2"x6" lumber. Presses the lumber together prior to imbedding plates. Imbeds plate lengths up to 13 inches. Features heavy-duty tubular frame, dual-recessed, simultaneousactivation buttons, guarded motor, sprockets and a 3 HP motor. 600 volt, 3 phase electrical. Price: $8,990, Condition: Good, Location: QC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt).

•Pressure Pump & Vessel. •Lightly Used.

•Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 Alpine PF90 AutoMark System • Wall Panel Plate Cutting & Marking Saw • Automated Length Stop & Ink Jet Printer as directed by Design Software Output • Cuts & Marks Both Top & Bottom Plates Simultaneously up to 20’ in Length • 10 HP Motor with 20” Blade • 240 Volt / 3 Phase / 30 Amps $39,900 FOB BC Wasserman & Associates 800-382-0329 www.wassermanassociates.com

“Serving the Component Industry Since 1996”

Now offering short term Working Capital Loans

Start smarter...

Grow faster...

Achieve more...

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108 Phone: 412-262-3225 Fax: 412-262-1154 MISC.

Alup 80 HP Compressor 80 HP Alup (​ A ​ llegro​series)​, model SCD80, rotary screw compressor with 11,418 hours.

From the manufacturer's website, "Produces a minimum of 60.4 CFM, up to 303 CFM, at 75-190 PSI. Features a high efficiency drive motor with loss-free, direct drive transmission for optimal efficiency". 460 volt, 3 phase electrical. $22,990 NOW $19,900 FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

36" x 72" Wood Framed Material Carts Swivel Casters. 8” Diameter Phenolic Wheels. Over 60 Carts Available at $100 NOW $60 Each. FOB NE. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Miscellaneous Used IBS Equipment •IBS Multi-Tool Panel Bridge (excludes Squaring Table) •2 Sets of IBS Light Bars •IBS Auto Stops FOB OR Wasserman & Associates 800-382-0329 www.wassermanassociates.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #59

MISC.

NEW!

New Sub-Component Nailer •

Assembles Trimmers, Jacks, L’s, Channels & Headers • 2x4 and 2x6 Capacity • Remote Fire & 3-Way Clamping • Staggered Nail Pattern • Squaring Stop • Foot Pedal Control Reserve Air Tank • 5’ Infeed & Outfeed Roller • Conveyor $17,250 FOB NE Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Cullen Model A40-2 Generator Set Detroit 12V-92 Engine.Capacity: 400 KW Capacity.Output: 120/208 Volt - 1388 Amps - 3 Phase..Control Panel..Skid Mounted..1,200 Hours. 30,000 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge.

Wired for 230 volt, 3 phase and 30 amp electrical service. $22,677, FOB FL | AS NEW. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Tee-Lok Lumber Stacker $6,500 FOB MB Canada.

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 Weima - Lenze Wood Processing System Weima model WL4S shredder, 30 HP drive with gearbox and limit switch, 10" diameter single-shaft with 1/2" grid screen, 23" x 41" hopper opening, PLC controls and 0.74 cubic yard hopper volume. A two-step wood processing process. Wood waste goes from the incline into the Weima grinder, to the short auger piece, then the 20' long auger at an incline, leading to the Lenze grinder.

Includes $1,000 worth of replacement knives and other available spare parts.

25,000 operating hours logged. Picture of output shown with listing. 230 volt, 3 phase, 100 Amp electrical. $37,990 FOB WI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Invicta DGI-40 16" Single Surface Planer (Used) •15 3/4” x 8 1/2” Capacity •25 & 46 FPM Feed Speeds •5,000 RPM Cutterhead Speed •7 1/2 HP Motor •230 Volt / 3 Phase •Powered Raise & Lower of Table $4,000 FOB WA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 NOW $49,500 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2010 USIFAB Roof Truss Vertical/Flat Stacker 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power. $63,980 FOB BC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW! Spida Simple Stop •20’ Length Stop with MDF Bench Top •Available in Lengths up to 60’ •7” Color Touch Screen Entry of Cut Lengths •110 Volt / 1 Phase •Excludes Saw, Outfeed Conveyor, Freight & Customs Charges •10’ Spida Simple Stop - $8,920 •20’ Spida Simple Stop - $11,340 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

New SL Laser Projection System New, laser projection system from SL Laser.

Projects roof truss, floor truss and wall panel design images accurately onto building Hain 20' Powered Measuring System surface, for faster setup and fabrication Adapts to Any Saw. Left or Right Hand times. Each laser head provides 21' Operation. Feet & Inches System (Stops projection length (@15 foot ceiling heights). at 12” Centers) or Inches System (Stops at Includes system computer, cables, mounting 10” Centers). Motor: 1/4 HP Linear Actuator hardware for attachment to customer's (110 Volt). Stop Rail: 2 x 4 x 1/4” Aluminum structure, factory installation, training and Extrusion. Stops: Jig Bored Steel. Stop choice of green or red laser. Works with Blocks: Machine Billet Aluminum. Optional each connector plate manufacturer's design Lengths from 5’ to 60’. Optional Gang Stop. software. Modular nature of the laser heads Add $770.00 per 10’ Section of Heavy Duty allows for easy, future expansion of system Roller Conveyor with Stands length. 120 volt, 1 phase. FOB NC Wasserman & Associates Wood Truss Systems 800-382-0329 765-751-9990 www.wasserman-associates.com www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

2004 Cresswood Grinder System Cresswood model HF3630AST hopperfed grinder with 3/8" screen, features a Cresswood Destroyer cutter head. Available spare 5/8" screen, shear bars and bolts included. Features 36" diameter infeed, floor sifting action, 30HP motor, heavyduty steel frame, and fluid clutch. Includes Northern model 22 blower unit with 15 HP motor and Hytrol belt incline, 18" wide with sides x 24 feet long. 230/460 volt, 3 phase electrical. $21,990, FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

Acer is proud to announce added features and all-new software for the Ranger RS!

In the past 6 years, we have built dozens of reliable and productive lumber retrieval systems. With millions of boards delivered to saws around the world, we have used that experience to develop these new features:      

Crown detection on the fly—each board is scanned and flipped if necessary for consistent crowning.

Queuing of up to 12--2x4s on the deck to keep the saw working while restocking the lumber carts.

Automatic laser scanning determines and displays actual board quantity in each station —sawyer can see available inventory at a glance.

Board-width verification measures each board and ensures proper width to reduce errors.

All-new software package with enhanced diagnostics and operator display to improve productivity.

The advanced Ranger RS will set the pace of production in your plant.

RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244 and other patents pending.

A

Th e

Component Manufacturing dverti$er

September 2017 #10218 Page #61

Adverti$er

Don’t Forget!

You Saw it in the MISC.

NEW!

Weima Horizontal Grinder www.carolinamachinerysales.com (704)288-1904 Vecoplan RG32/30 Grinder www.carolinamachinerysales.com (704)288-1904

M ACdverti$er

Th e

omponent

anufacturing

EMSI Factory Floor Trucks

Eide Machinery Factory Floor Trucks feature solid hardwood construction for years of service and fitted with phenolic roller bearing wheels and ball bearing swivel castors for a smooth ride. Several sizes available to fit your factory, including standard 36˝ and 48˝ models.

EMSI Teeter Carts

Unit Lumber Handling Equipment Eide Machinery Teeter Carts are designed to carry one full unit of lumber. Features: tire/castor combination allowing more control, an ability to maneuver in rough conditions indoors and outdoors, and a shortened pivot-radius for tighter areas. Utilize Teeter Carts as an alternative to multiple forklifts or to eliminate forklifts from indoor work areas completely. Models up to 6000 lbs. load capacity.

Look to Eide Machinery for: ▶ Factory Floor Trucks ▶ Teeter Carts ▶ Incline Conveyors ▶ Powered and Idle Walk-thru Truss Conveyors ▶ Lumber Infeed Decks ▶ And more.

90 INERY SAL

R

IN

27

EB

PHONE: 800-289-5627

Like Money in the Bank.

Service you can count on!

We know machinery.

.

CEL

AT

Newman KM16 Trim Saw www.carolinamachinerysales.com (704)288-1904

E

INC

EIDE

H AC

S,

M

Serving the Structural Building Components Industry

Material Handling & Conveyors

017

New Spida 20' Plate Marker 20’ of Steel Framed Table with Roller Conveyor or MDF Bench Top. Spida Automated 20’ Length Stop/Plate Positioner & 10’ Infeed Roller Conveyor. Workstation, Control Cabinet Enclosure & 17” Touch Screen Integration. Spida or MangoTech Plate Cutting & Marking Software. Cuts to 20’, Marks to 18’. Cut & Mark 3,000 LF of Plates per 8 Hour Shift. Length of Delay to Mark Board: 1/2 Second (can be adjusted).

Compatible File Formats: .trs, .mdf, .mwf, .xml, .hay/hfs, .gwf & .tx. Includes 2 Day Onsite Training & Installation. Add $750 Annually for 12 Month Phone & Virtual Tech Support. Add $700 for DeWalt Model DWS780 12” Double Bevel Sliding Compound Miter Saw. Add $8,920 for Spida 20” Up-Cut SnipSaw. Add $8,050 for Lauderdale Hamilton 24” Super Chop Saw. Deduct $3,930 for Aluminum Framed Table with MDF Bench Top. Excludes: Dust Collector, Saw Stand, Freight & Customs Charges. $$29,529 FOB NZ Wasserman & Associates 800-382-0329 www.wassermanassociates.com

−2

Alup 80 HP Compressor Price: $22,990 NOW $14,990 Condition: Good Location: PA 80 HP Alup (Allegro series), model SCD80, rotary screw compressor with 11,418 hours.

From the manufacturer's website, "Produces a minimum of 60.4 CFM, up to 303 CFM, at 75-190 PSI. Features a high efficiency drive motor with loss-free, direct drive transmission for optimal efficiency". 460 volt, 3 phase electrical.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

G 9 0 Y E A R S!

19

Machinery ~ Supplies ~Since 1927~

Toll free 800-344-EIDE | www.eidemachinery.com 3219 North Second Street Minneapolis, MN 55411-0397

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #62

Misc.

Doors - Stairs - Beams

Detects missing or misaligned plates. 16' Throat. 110 Volt / 1 Phase. Excludes CMF Finish Roller. Reference literature for additional details. $12,500 FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Builders Automation Template Stair Router Model RUWO 2000 MFSR. Cut Box and Open Stringers. Manual Setup with Auto Feed and Cut. One or Two Stringers per Cycle. 10’ Infeed and 10’ Outfeed Roller.

Conveyor with Stands. 240 Volt / 3 Phase. $15,000 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEW!

Doors - Stairs - Beams

Builders Automation Stair Stringer Router Watch video here: http://goo.gl/gSRwjd More information here: http://goo.gl/mSsxyY 800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

manufacturers’

Representatives

remanufactured!

B.A.M. CNC Stair Stringer Router Remanufactured, Builders Automation Machinery [BAM] model CNC/MFSR stair router. Does contemporary, box and open stairs, and is the only machine available that also cuts the top and bottom landings. Programmable with a large library stored in the machine for almost all box and open stringers. Remanufactured to include new wiring, rebuilt spindle motors, new drives and is equipped with two variable frequency drive, 5 horsepower, 3 phase motors. Comes with a six-month warranty. A portable 4-bag, 3 phase vacuum which is switched on at the machine controls is available for an additional $1,568. Installation by the OEM is available at an additional charge. 230 volt, 3 phase, 60 amp electrical requirements. 120 p.s.i. at 35 CFM air requirements. $52,000

765-751-9990 PHONE: 800-289-5627

www.woodtrusssystems.com

Full House & RUVO Door Machinery •Full House Diamond 3001 Door Machine ($7,250) •Full House Strike Jamb Router ($1,250) •RUVO 1300 Double End Door Trim Saw ($2,950) •RUVO 808 SPLA Casing Miter and Kerf Duplex Saw ($2,100) •Package price for all 4 machines ($11,900) FOB NY Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Norfield Magnum Door & Jamb Machine Door Sizing/Beveling. Lock & Latch Drilling. Hinge Butt Routing in the Door & Jamb. Faceplate Routing up to 1 1/8” x 2 3/4”. Air Predrill & Air Screwdriver. Width: Doors to 4-0, Jambs to 10 1/2”. Height: Doors to 8-0, Jambs to 8-0. Thickness: Doors to 1 3/4”, Jambs to 1 1/8”. Butt Sizes to 5” x 5”. Butt Spacing: Infinitely Variable.

Lock Backsets from 2 3/8” to 5”. 230 Volt / 3 Phase $8,000 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Dotul Door Stop Stitcher Click Here for details $4,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

RUVO Model 925 Door Machining Center Interior & Exterior Door Machine will automatically: bore for the main lock hole. bore for the latch hole. rout for the rectangular latch plate. bore for the strike hole. rout for the rectangular strike plate. mortise for two or three hinges in both door & hinge jamb. Specifications: Door Height: 6’-6” to 8’-0”. Door Width: 1’-4” to 4’-0”.

Door Thickness: 1 3/8” or 1 3/4”. Butt Sizes: 3 1/2”, 4” or 4 1/2”. Jamb Width: 2 1/2” or 10 1/2”.

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

Forward Thinking.

Respecting the Past.

Ask most people about the lumber industry and you’ll get a fairly predictable list of descriptions. What you’re not likely to hear are terms like: ● technologically advanced, ● sustainable logging, ● small log harvesting, ● green lumber products, ● commitment to healthy communities, and ● ecologically-minded forest management When people talk about Vaagen Brothers, that’s exactly what you’ll hear.

Working in the forests of Washington for more than 50 years, we’ve learned to take the best of traditional logging and lumber milling practices and combine them with advanced production technologies and forward-thinking sustainable forest management practices to create a company that’s as vibrant and growing as the healthy forests and ecosystems necessary to its success.

Contact us: (509) 684-5071 or info@vaagenbros.com

www.vaagenbros.com

Logs to Lumber Vi

MANUFACTURING WITH WOOD ISN’T ROCKET SCIENCE. Okay, maybe it is.

WOOD RUNNER® BRAND MACHINERY NOW INCLUDES: The improved AirPickTM Lumber Retrieval System and new for 2017: FastFrame™ Wall Panel Marking Saw Visit www.woodrunner.com or call 507-322-3700 to learn more today.

®

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

Ozone NAAQS Already Sufficiently Protective of Public Health

September 2017 #10218 Page #65

Robert Glowinski is the President & CEO of the American Wood Council (AWC).

T

he House of Representatives has passed the Ozone Standards Implementation Act of 2017 (HR 806), which balances air quality with sound regulatory processes. The legislation would prevent a rushed implementation of the 2015 ozone Nation Ambient Air Quality Standards (NAAQS). AWC urges the Senate to move quickly to pass a common-sense approach that will also support global competitiveness for the wood products industry.

Currently under the Clean Air Act, at least every five years the U.S. Environmental Protection Agency (EPA) must update its assessment of the latest science and consider whether any changes are needed to NAAQS for criteria pollutants. EPA missed its review deadline of the 2008 rule for ozone in 2013, highlighting that this timeframe is insufficient. The bill’s proposed switch to a 10-year NAAQS review cycle is an important improvement adding certainty.

EPA had announced a one-year delay in implementing the ozone NAAQS earlier this year, as it considered whether states needed more time to make non-attainment designations. Last month, EPA reversed position on the delay and is now letting the 2015 NAAQS rule move forward before the 2008 rule has been fully implemented. According to EPA’s own analysis, the cost impact of a new rule will be more than $15 billion annually, making it one of the most expensive air rules ever. Although under current law EPA cannot consider cost when setting NAAQS (only during implementation), health effect evidence has not changed significantly since 2008 to justify the tighter requirements.

Air quality has gotten significantly better over the last several years and will continue to improve due to other EPA rules even if the ozone NAAQS is not changed. Deferring compliance with the 2015 ozone NAAQS until 2025, as the legislation proposes, allows accounting for these air quality gains and avoids unnecessary controls in or near areas that will meet the standard anyway, but not quickly enough.

Constantly changing air quality requirements creates a repeating need for capital investment to meet changing requirements, as well as significant uncertainty for new mill investments that are critical to global competitiveness. As ozone limits are driven toward what is essentially equivalent to background levels in some parts of the country, especially considering the significant role of international sources of emissions, it will also be driving companies to cancel job-creating projects. And with other NAAQS reviews pending, such as for fine particulate matter, the situation only gets worse.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A family owned business you can trust

www.vaagenbros.com www.vaagenbros.com

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #67

Lumber Briefs

LAYMAN'S LUMBER MARKET BRIEF Matt Layman, Publisher

By Matt Layman September 2017 Publisher, Layman’s Lumber Guide

September Surge September Surge at Historically High Prices at September Surge...Normal

Historically High Prices To put things into perspective. Over the past

To put things into perspective. Over the past 15 To put things into perspective. Over the past 15 years, SYP 15years, years,SYP SYP2x4#2 2x4#2has hasexceeded exceededthis thisweek's week'sprice just 2x4#2 has exceeded this week’s price just four times. The highest price just four times.

The highest was $442 in 2004 What exactly is the September Surge? It is an four times. The highest was $442 in 2004 ($42 was $442 in 2004 ($42 higher.) Canadian SPF only once, also ($42 higher.)

Canadian SPF only once, also 2004 increase in lumber buying, reversing from summer higher.) Canadian SPF only once, also 2004 @ $470 2004 @ $470 ($85 higher). Dry Hem Fir, ditto...once, $465 ($35 @($85 $470higher.) ($85 higher.)

DryFir, Hem Fir, ditto...once, Septemberliquidation Surge...Normal inventory to inventory accumulation to Dry Hem ditto...once, $465 ($35 higher). Green Doug Fir...Zero...2004 was $20 lower at $460. $465 ($35 Green higher).

Green Doug Fir...Zero...2004 prepare for autumn. Weather begins to improve higher).

Doug Fir...Zero...2004 was $20 lower What exactly is the September Surge?

It is an increase in 7/16 OSB (I have more data) over the past 25 years has was $20 lower at $460. after August's sweltering heat and humidityat $460. lumber buying, reversing from summer inventory liquidation exceeded this week’s price of $335 only twice: 2003 @ $380 7/16 2525 restricting jobsite productivity. Builders begin their 7/16OSB OSB(I(Ihave havemore moredata) data)over overthe thepast past to inventory accumulation to prepare for autumn.

Weather and 2004 @exceeded $400. this years, has scramble to dry in as much framing as possible in years, hasexceeded thisweek's week'sprice priceofof$335 $335only only begins to improve after August’s sweltering heat and humiditytwice; 2003 @ $380 and 2004 @ $400. preparation for winter. twice; 2003 @ $380high and 2004the@lumber $400.market has a history From historically prices, restricting jobsite productivity.

Builders their scramble From historically prices, the lumber market The shift in buying strategies andbegin the increase in From historically highhigh prices atmark, this week, of declining.

At that high 2004 water over the the next eleven to dry in as much framing as possible Surge, in preparation for winter. has a history of declining.

At that 2004 high water demand creates the September historically lumber market has a history of declining.

At that weeks SYP fell $45; SPF dropped $155; Dry Hem Fir collapsed the next weeks SYP eleven fell $45; SPF lifting prices higher through October.

2004 high water mark, over the next weeks The shift in buyingSeptember strategies and the increase in demand mark, $175;over Green Doug Fireleven eroded $185. $155; SPF Dry Hem Fir collapsed $175; Green SYP fell $155; Dry Hemafter Fir creates the September Surge, historically lifting prices higher dropped OSB$45; continueddropped to rally three more weeks the lumber Fir eroded $185.

September Surge From Historically High Prices Doug collapsed $175; Green Doug Fir eroded $185.

September through October. peak, up to $435, then fell $200 in seven weeks. Think on that OSB continued totorally more continued rallythree three moreweeks weeksafter after the asOSB you prepare for the September Surge.

September Surge From Historically High Prices the lumber peak, up to $435, then fell $200 lumber peak, up to $435, then fell $200 in in seven There is a distinct difference between how our My play would be cover SYPprepare through midthe October. seven weeks.

Think on to that asprepare you for weeks.

Think on that as you for the lumber market handles the September Surge There is a distinct difference between how ourwhen lumber September EverythingSurge. else, justMy fill play in thewould gaps and it someSYP room. begive to cover September Surge. prices are at historical highs. Perceptively high prices market handles the September Surge when prices are at through mid October. Everything else, just fill in My play would ...ml be to cover SYP through mid can add to the rally, however real, quantifiable high Looking Forward historical highs. Perceptively high prices can add to the rally, the gaps and give it some price relationships have caused significant downside October.

Everything else,room. just fill in the gaps and give however real, quantifiable high price relationships have caused A veteran lumberman, Matt Layman publishes Layman’s Lumber Guide, the itweekly someforecasts room.and buying advisories that help component manufacturers movement after themovement September significant downside afterSurge. the September Surge.

Looking ...ml Forward ...ml saveLooking money onForward lumber purchases every day. You can reach Matt at 336-5166684 or matt@laymansguide.org.

Composite (2x4's #2 SYP-E, SPF-W, Dry Hem Fir, Green Doug Fir.) Past 6 months-Current vs. (FTP) Forecasted Time & Price Vertical arrows project time-major turning weeks. Black squares forecast price direction.

Green Zone=Increasing Demand #02-30

Red Zone = Decreasing Demand Weeks #31-01

Yellow Zone=Daylight Savings Weeks #11 Through Week #44.

440 420 400 380 360 340

46 47 48 49 50 51 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Layman's Lumber Guide...Matt Layman, Publisher PO Box 905, Belmont, NC 28012 Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org Reprint or distribution is unlawful without permission. www.laymansguide.org TWITTER.com/Laymansguide Join Matt layman on LinkedIn

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #68

Fire Testing Completed on Full-Scale Mass Timber Building

Five full-scale mass timber fire tests in a multi-story apartment building have been completed with promising results.

The International Code Council Ad-hoc Committee on Tall Wood Buildings provided the five fire scenarios that were tested in each of the two onebedroom apartments constructed using mass timber.

The test scenarios included various arrangements of exposed and unexposed cross-laminated timber (CLT) with open doors between living and sleeping areas.

Additionally, automatic sprinkler systems effectiveness was evaluated.

Test 1: A mass timber structure fully protected with gypsum wall board was subjected to a large furnishings and contents fire. The test was terminated after 3 hours without significant charring on the protected wood surfaces of the structure.

Test 2: Approximately 30% of the CLT ceiling area in the living room and bedroom were left exposed. The test was terminated after 4 hours, providing additional time to determine if there would be any significant fire contribution from the exposed CLT. Notably, once the furnishings and contents had been consumed by the fire, the exposed CLT essentially self-extinguished due to the formation of char that protected the underlying wood.

Test 3: Parallel CLT walls were left exposed, one in the living room and one in the bedroom. Similar to Test 2, once the apartment furnishings and contents had been consumed by the fire, during which a protective surface of char formed on the CLT, the mass timber surfaces essentially self-extinguished.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #69

Tests 4 and 5: To examine the effects of sprinkler protection, for both tests all mass timber surfaces in the living room and bedroom were left exposed. Test 4 demonstrated that, under normal operating conditions, a single sprinkler easily contained the fire. For Test 5, the fire was allowed to grow in the compartment for 23 minutes before water was supplied to the sprinklers which quickly controlled the fire.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #70

“The results of these fire tests will continue to be studied and will help inform code change recommendations from the Ad-hoc Committee later this year,” said Stephen J. DiGiovanni, P.E., Ad-hoc Committee Chair and Fire Protection Engineer for the Clark County (NV) Department of Building and Fire Protection. “These tests are an important part of the extensive research data the Committee has reviewed to validate the performance of tall wood buildings.”

The tests were funded in partnership with the U.S. Forest Service’s State and Private Forestry Wood Innovations division and Forest Products Laboratory and the American Wood Council, and were conducted at the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives Fire Research Laboratory. A General Technical Report FPL-GTR-247 on the fire tests will be available from the Forest Products Laboratory in the near future.

The American Wood Council (AWC) is the voice of North American wood products manufacturing, representing over 75 percent of an industry that provides approximately 400,000 men and women in the United States with family-wage jobs. AWC members make products that are essential to everyday life from a renewable resource that absorbs and sequesters carbon. Staff experts develop stateof-the-art engineering data, technology, and standards for wood products to assure their safe and efficient design, as well as provide information on wood design, green building, and environmental regulations. AWC also advocates for balanced government policies that affect wood products. www.awc.org | @woodcouncil The mission of the U.S. Forest Service, an agency of the U.S. Department of Agriculture, is to sustain the health, diversity and productivity of the nation’s forests and grasslands to meet the needs of present and future generations. The agency manages 193 million acres of public land, provides assistance to state and private landowners and maintains the largest forestry research organization in the world. Public lands the Forest Service manages contribute more than $13 billion to the economy each year through visitor spending alone. Those same lands provide 30 percent of the nation’s surface drinking water to cities and rural communities and approximately 66 million Americans rely on drinking water that originated from the National Forest System. The agency also has either a direct or indirect role in stewardship of about 900 million forested acres within the U.S., of which over 130 million acres are urban forests where most Americans live. https://www.fs.fed.us The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) Fire Research Laboratory (FRL) opened in 2003. FRL engineers utilize its unique capabilities and sophisticated instrumentation to assist ATF Special Agent Certified Fire Investigators (SA/CFI) with fire investigations. In addition, FRL engineers work closely with other federal agencies to provide testing services to assist with their research programs or investigations. This one-of-a-kind facility includes state-of-the-art scientific instruments that allow researchers to measure data significant to fire behavior, including heat release rate, burning rate, and smoke production. The facility offers a range of capabilities, from bench-scale fire measurement instruments to a 16,900-square-foot burn room that can accommodate a three-story structure. The Data Acquisition System (DAQ) is capable of collecting over 2,300 channels of data every second. A 16-channel video collection system allows for video to be captured in both Standard Definition (SD) and High Definition (HD). Additional video capabilities include high speed and FLIR thermal imaging cameras. The facility also features an on-site air and water pollution treatment facilities. https://www.atf.gov/arson/atf-fire-research-laboratory PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

T Th He E

omponent MANUFACTURING anufacturing COMPONENT dverti$er

Adverti$er

Don’t Forget!

You S�� Saw it ��� �� in �� the ���

Safety First!

Meeting Topics From State Fund, CA.

September January 2017 #10218 #10210 Page ��� #71 ����

Herramientas Eléctricas Hay que Tener Cuidado

Cada año trabajadores sufren choques eléctricos al manejar herramientas y equipos eléctricos. Para proteger a los trabajadores contra los peligros de la electricidad, es necesario enseñarles los conocimientos básicos sobre las causas de los choques eléctricos y la posibilidad de muerte. Uno de los grandes problemas al comprender los peligros de los choques eléctricos es la creencia errónea de que sólo los altos voltajes pueden producir la muerte. Lo que mata no es el voltaje sino la cantidad de corriente que pasa a través del cuerpo. Las condiciones y la posición del cuerpo tienen mucho que ver con la probabilidad Each year workers suffer shock when handling electrical tools and de recibir una descarga eléctrica. equipment. To protect workers against the hazards of electricity, teach them El agua y la electricidad pueden ser una combinación fatal. Las áreas the basic facts about the causes of shock and death. One of the big problems in understanding the dangers of electrical shock is the mistaken belief that only húmedas y los objetos metálicos le ofrecen un paso fácil a la electricidad para high voltages kill. It’s not the voltage that kills, but the amount of current that llegar hasta la tierra. Si un trabajador tiene las manos sudadas, si los calcetines passes through the body. The condition and placement of the body has a lot to o los zapatos están húmedos o mojados, si el piso está mojado, o si el trabajador está parado en un charco de agua, la humedad permitirá que pase más corriente a do with the chance of getting a shock. través del cuerpo. Si el trabajo se hace con objetos metálicos o en áreas húmedas, Water and electricity can be a fatal combination. Damp areas and metal el trabajador debe reconocer los peligros presentes y tomar las precauciones objects can offer good shortcuts for electricity to reach the ground. If a worker’s necesarias. Estas precauciones incluyen guantes y botas de hule, alfombrillas hands are sweaty, if socks and shoes are moist or damp, if the floor is wet, or if de hule, herramientas aisladas y láminas de hule que pueden usarse para cubrir the worker is standing in a puddle of water, the moisture will allow more current el metal expuesto. to pass through the body. If work is to be done with metal objects or in damp Recordar algunas recomendaciones puede ayudar a evitar accidentes eléctricos: areas, workers should recognize the hazards and take necessary precautions.

These precautions include rubber gloves and boots, rubber mats, insulated tools, • Trate todos los cables eléctricos como si tuvieran corriente. and rubber sheets which can be used to cover exposed metal.

Remembering a few tips can help avoid electrical accidents: • Inspeccione los equipos y cordones de extensión antes de cada uso.

Electric Tools - Grounds for Concern

•

Treat every electric wire as if it were a live one.

•

Inspect equipment and extension cords before each use.

•

Take faulty equipment or plugs with bent or missing prongs out of service for repair.

•

Only qualified electricians should repair electrical equipment or work on energized lines.

•

If a plug doesn’t have three prongs or if the receptacle doesn’t have three openings, make sure the tool is grounded in some other way before use.

•

Never try to bypass an electrical system by cutting off the third prong of a plug.

•

Turn off the power and report the smell of hot or burning plastic, smoke, sparks or flickering lights.

•

Stop using a tool or appliance if a slight shock or tingling is felt.

•

Never disconnect an electrical plug by pulling on the cord.

•

Whenever working on an electric circuit, the circuit should be turned off and locked out at the circuit breaker or fuse box to ensure that the circuit cannot be accidentally turned on.

•

Those who regularly work on or around energized electrical equipment should be trained in emergency response and CPR.

•

Saque de servicio para su reparación a todos los equipos defectuosos o que tengan clavijas de enchufe dobladas o faltantes.

•

Sólo los electricistas calificados deben reparar los equipos eléctricos o trabajar en líneas eléctricas activas.

•

Si el enchufe no tiene tres clavijas, o si el tomacorriente no tiene tres agujeros, asegúrese de que la herramienta esté conectada a tierra de alguna otra manera antes de usarla.

•

Nunca trate de enchufar un equipo eléctrico cortándole la tercera clavija al enchufe.

•

Corte toda la alimentación eléctrica y reporte cualquier olor de plástico caliente o quemado, humo, chispas o luces parpadeantes.

•

Deje de usar la herramienta o equipo electrodoméstico si se siente un choque ligero o cosquilleo eléctrico.

•

Nunca desconecte un enchufe tirando del cable eléctrico.

•

Siempre que trabaje con un circuito eléctrico, éste deberá tener su alimentación desconectada y bloqueada en el cortacircuitos o caja de fusibles correspondiente para asegurar que alguien no pueda conectar accidentalmente la alimentación a dicho circuito.

•

Las personas que normalmente trabajan en equipos eléctricos con corriente o en sus alrededores, deben estar entrenados para dar auxilio ante emergencias y en reanimación cardiopulmonar (RCP).

Durante los meses lluviosos de invierno, se debe tener aún más cuidado al trabajar con equipos eléctricos o cuando se trabaja cerca de objetos In wet, winter months, extra caution should be observed when working with conectados a tierra. electrical equipment or when working near grounded objects.

The above above evaluations evaluations and/or and/or recommendations recommendations are are for for general general guidance guidance only only and and should should not not be be relied relied upon upon for for legal legal compliance compliance purposes. purposes. They They are are based based solely solely on on the the The information provided provided to to us us and and relate relate only only to to those those conditions conditions specifi specifically discussed. We We do do not not make make any any warranty, warranty, expressed expressed or or implied, implied, that that your your workplace workplace is is safe safe or or information cally discussed. healthful or or that that itit complies complies with with all all laws, laws, regulations regulations or or standards. standards. healthful PHONE: 800-289-5627 800-289-5627 PHONE:

Read/Subscribe ������ online �� at www.componentadvertiser.com �������������� ���������������������������

FAX: 800-524-4982 800-524-4982 FAX:

DON’T LOSE PRODUCT FOR DESIGNERS DUE OFFICE CONDITIONS O

The

Herman Miller, Inc. 3D View

8-18-16 ACTON MOBILE 47H.ztx - Office Printed August 18, 2016 Drawing may not be shared without express authorization from author

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Design Manager Optional Divider

Cubicle with L shaped desk Overhead cabinet

Media Roo Plans Storage or added

AS LOW AS $425.00 per MONTH!

RENT A MOBILE D TEAM SUITE TO Affordable | Available Nationwide |

AV AIL 48 A HO BLE UR I N S!

TION TIME TO POOR OR LACK OF SPACE.

e

JobLine.com Approved

Design Team Suite

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Design Manager

Cubicle with L shaped desk Overhead cabinet

Media Room Plans Storage

Z-Axis® Software under license from Herman M

om

d

Designer Approved:

DESIGN ODAY! Fast Delivery

REQUEST A QUOTE Thomas McAnally 800-289-5627x1 twm@thejobline.com

The

JobLine

.com

Careers in the Truss, Wall Panel

and Engineereed Wood Components Industry

JobLine Hiring Zone Job Opportunities Available Candidates Services & Products

JobLine.com, inc.

800-289-JOBS

The

September 2017 #10218 Page #75

www.thejobline.com

job opportunities available

Technical Outside Sales Technical Outside Sales Roof & Floor Truss, I-Joists J12904 Truss J12892 Desmoins IA and surrounding Midwest market Truss Designer J12889 Senior Truss Designer Midwest Truss/Panel/EWP J12902 Canada Remote Wall Panel Designer J12893 Remote Light Gauge Steel Remote Truss Designer - J12865 Remote - Central Time Zone Truss Designer J12879 GA Truss Designer/Estimator (Panel Too) J12784 Truss Designer J12871 PA Central Florida Multifamily Truss Designer Outside Sales J12847 Roof & Floor Truss, I-Joists J12903 Northern Florida Desmoins IA and surrounding market Estimator- Truss/Panel J12870 Upper Midwest Senior Truss Designer Truss/Panel/EWP J12901 Production Manager Canada Truss/Panel J12868 Upper Midwest Senior Truss Designer Truss/Panel/EWP J12900 Truss Designer J12867 Canada South Senior Truss Designer Truss/Panel/EWP J12896 Canada

Light Gauge Steel Truss Designer - J10476 South

Truss Sales & Design J12898 West

Designer - Truss/Panel J12861 KY

Senior Truss Designer J12807 West Truss Designer J12882 Tennessee Outside Sales Techincal | Truss/Lumber J12881 Tennessee

More jobs at www.thejobline.com

Outside Sales Truss/Full Building Materials J12827 DFW Texas area Truss Designer Single Family Tract J12849 AZ Truss Designer J12846 Beautiful Charleston SC

Technical Outside Sales Truss J12891 Columbus/Dayton Ohio area

Outside Sales Truss (w/wo Design) J12830 Southwest

800-289-JOBS

Truss Designer J11700 Northeast

Truss Designer J12841 NC

Technical Outside Sales Truss J12890 Midwest

PHONE: 800-289-5627

JobLine.com, inc.

Truss Plant/Operations Manager The J12829 Iowa

Read/Subscribe online at www.componentadvertiser.com

Job Hunting?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Candidates seeking jobs: theJobLine.com, Inc. The JobLine specializes in recruiting and placing professionals in the LBM, Engineered Wood Products, Truss, Wall Panel, and Modular industries.

A s t h e C a n d i d a t e ’s intermediary, our process is unique, doesn’t require a resume, and only presents a you to an employer if you approve. All you need to do is create a JobLine Candidate Profile. It’s easy and on line. Just click on the New Candidate tab at the top of the page. Take your time and be thorough. It’s a tool for your future! You can create, save, and update at any time.

You can also specify your job, location, and compensation goals.

Our Recruiters are personally committed to helping you find opportunities that fit your goals.

To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab.

FAX: 800-524-4982

JobLine.com, inc.

The

JobLine.com, inc.

800-289-JOBS www.thejobline.com

The

800-289-JOBS

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! Available Candidates ID: C10897 Design Manager/Senior Designer/PE/ Optimizer - Truss/Panel/EWP Relocation: USA - South 30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open??

Thom's Notes: PE with Mid Atlantic seals ID: C16183 Truss Designer | Remote Truss Designer Relocation: Utah Truss Designer - Multi-family. Primary duties: design, layout, optimization, cutting/production documents, and takeoff. Secondary duties: scheduling, repairs, customer service, inside sales, and field measurements. Software used: MiTek. Component experience includes floor trusses, roof trusses, IJoists, EWP, hardware, and lumber. Market experience includes tract, single family, single family custom, multi-family, light commercial, and agriculture. My volume was typically 200,000 a month.

ID: C16169 Remote Truss Designer | Remote Wall Panel Designer Relocation: Florida My objective to find a company that I can use my skills to work as a remote designer.

I have a successful design business now but would like to be part of a growing company with benefits. Has MiTek and ITW software experience. Excellent test scores.

PHONE: 800-289-5627

ID: C12001 Production/Plant/General Manager - Truss/ Panel/LGS/Wood Relocation: Alabama, Mississippi, Tennessee, USA - South, Kentucky My objective is to gain a position as a production/plant manager with a professional, winning organization where I can utilize my years of experience to assist in the continued success and growth of the company. I have a strong desire to be a part a great team that has a clear vision and mission for their stockholders, customers, employees, and for the future. I welcome the opportunity for advancement and promotion, and am always ready to accept new responsibilities. I have been involved in the rapid growth of a small truss plant, a new LGS truss and panel production facility, and timber truss production, with responsibility for hiring/training/ managing employees at every stage. In addition to production management, I also have extensive experience in purchasing, inventory control, quality control and delivery. I am "long-term" oriented, having been with my current employer 18 years.

I am looking for the chance to grow and advance within the same company, depending on my performance and abilities.

As Plant Manager: Oversee all areas in wood truss, LGS truss, LGS wall panel, Timber truss production and delivery.

Production management, Facilities Management, Maintenance Management, Master Production Scheduling, Quality Control, Safety, Hiring/Firing, Discipline, Human Resources, Purchasing (lumber, plates, hardware, LGS and accessories, EWP, etc.), delivery, and others as needed.

ID: C11827 Remote Estimator - Truss/EWP/Lumber/ Construction Relocation: Alabama, Florida, Georgia Read and interpret blueprints and drawings, generate quantity take-offs on building materials, design I-joist floor systems, design 2x floor systems, design stick built roof/ceiling joist systems, create layouts for the above roof/floor systems, as a Remote Estimator. Bachelor's Degree in Building Construction. Tested 73 on the JLTDSE. ID: C11736 Design/Sales - Truss/I-Joist/Millwork/LBM Relocation: Virginia, Pennsylvania Accurately estimate commercial and residential projects by designing and engineering the engineered wood products and loose material required for the jobs.

Make pricing decisions to assist in selling jobs. Created, developed, and implemented a new engineered wood products catalog for customers, based on current market numbers. Design roof and floor truss systems in Mitek (Sapphire). Performed Inside Sales duties as well as my Estimating

Hiring Zone - Available Candidates duties and was the interim Inside Sales representative for the better part of a year until another candidate was found.

ID: C13445 Truss Designer | Wall Panel Designer | Truss Cutting Technician Relocation: Texas, Arizona 2 years' experience. Perfect entry level candidate. Design light gauge steel walls and trusses for residential homes and small commercial buildings. AutoCAD certificate with Architectural focus. From the candidate: I have a strong architectural background and come from a construction family. I've seen or worked in most facets of the construction field. From masonry work to framing to roofing since I was a teenager.

I'm very passionate about what I do , self motivated and always strive to be the best.

Very picky with my work and I don't like to do anything wrong and failure is not an option for me. I always try to do whatever is needed to achieve company goals.

ID: C16034 Truss Designer, Truss Designer - Multifamily, Wall Panel Designer, Wall Panel Designer - Remote, Senior Wall Panel Designer, Wall Panel Design Manager Relocation: Massachusetts As Senior Architectural Panel Designer Coordinating architectural and structural plans to develop manufactured walls sections for install in field such tasks as: • Coordinating between Architect, Structural Engineer and General contractor to find conflicts to prevent the delay in schedule during the construction phase.

• Full Design of wall panels and the layout of the panels and bundles to speed the framing of floors and trusses.

ID: C11747 Remote Truss Designer | Design Manager Alpine preferred Relocation: Florida, USA - South As senior truss designer, I was hired to do only the largest & most complex single family homes & large commercial buildings... Until the building industry fell apart in "The Great Recession". All others on the design staff were laid off as the owners fought to stay in business, so with some help from the production manager and the owner's son with the most basic jobs, I handled virtually all pricing, layouts, final truss design, printing & prep for production.

With most of our local customers virtually gone, our only path to survival was holding on to the high margin, custom builders that still relied on my design work. Alpine software. 20+ years experience.

Read/Subscribe online at www.componentadvertiser.com

September 2017 #10218 Page #76 ID: C11781 Truss Design Manager Relocation: North Carolina Worked on the most complicated custom projects, commercial buildings, and apartment complexes. Quickly became a team leader and was considered company wide as an expert in truss framing and computer applications. Provided training for a group of 30 experienced component designers in topics including load tracking, truss and layout optimization, and hardware specification. Optimization training helped to reduced material costs by 5%. Developed departmental procedures to increase consistency and accuracy of all designs and estimates. Reduced errors on repetitive projects by 25% by creating the master project file database, which organized and provided fast and easy access to project information. Streamlined estimating process for commercial construction projects.

Analyzed the final cost of completed projects and applied results to new estimates.

Reduced estimating time by 75% Managed up to 10 designers/sales reps. Software: MiTek, AutoCAD. ID: C15999 Outside Sales - Truss | Wall Panel | EWP | Installed Sales Relocation: Alabama, Georgia, Kentucky, North Carolina, South Carolina, Tennessee, Virginia 16 years' experience in outside sales of trusses, wall panels, engineered wood components, stairs and other building materials. Projects range from tract to high volume multifamily apartments. Has developed new territory, improved sales in lagging markets, and met or exceeded sales goals in most years. Has turn key installed sales experience, and has limited design skills from the past. Please inquire for additional information. Easy relocate.

ID: C15995 Truss Designer - MiTek Relocation: Florida Truss Designer. Primary duties: design, layout, optimization, and cutting/production documents. Secondary duties: checking others work. Software used: MiTek and AutoCAD. Component experience includes floor trusses and roof trusses. Market experience includes single family, multifamily, light commercial, and agriculture.

My volume was varied depending on projects. 2 years experience, MiTek software.

ID: C15958 Operations/Plant Manager - Millwork | Doors | Ply | Flooring Relocation: Colorado, Illinois, Indiana, Iowa, Kansas, Kentucky, Minnesota, Missouri, Montana, Nebraska, Nevada, North Carolina, South Dakota, Tennessee, Virginia, Wyoming 30 years' experience starting in production FAX: 800-524-4982

JobLine.com, inc.

The

800-289-JOBS www.thejobline.com

September 2017 #10218 Page #77

JobLine

The Hiring Zone - Available Candidates .com, inc. and advancing to multi-plant operations systems, skills, and earn more about the truss Proficient use of MiTek Engineering, manager. Door experience includes building industry. I enjoy working with my eFrame, AutoCAD, TJBeam, and Excel managing three Production Managers and hands, building things, and having a sense of programs. five Production Supervisors, consisting of pride in the high quality of the end product.

300 hourly employees producing 11,000 6+ years' experience as Plant Manager doors and 10,000 face frames per day. ID: C10500 including staff development, workforce Responsible for the manufacturing functions Plant/Location/General Manager - Truss management and training, meeting of all mill operations, five frame component Relocation: California, Colorado, Florida, production goals, asset management, machining cells, three frame assembly Hawaii, New Mexico, Texas, USA - ALL maintenance and capital improvements, operations, four door component machining States, Kentucky, Tennessee, Oregon, budget development and reporting, cells, three door assembly clamps, three door Washington, Arizona, Ohio, Georgia and assuring company policies were profiling lines, two wide belt sanding lines implemented across all departments. and specialty machining and assembly cells. Truss and Components Plant Manager with over 15 years of experience in the truss Compensation: $90's + bonus Flooring experience: Responsible for industry who is looking to apply knowledge all plant functions including budgeting gained while continuing to develop and Thom's Notes: One of our top 1% ACE's, and P&L. Managed six Department grow within the management sector. young, ready to grow with your company.

Managers: two Production Departments, We’re here when you need help!

Quality Assurance, Materials, Human As Plant Manager: Create programs to ID: C11750 visit: www.thejobline.com Resources including SHE, and Plant motivate employees to achieve peak Design/Customer Service/Trainer - LGS email: mail@thejobline.com Engineer/Maintenance Manager including productivity. Hire, train, discipline and Truss the CI program. Their staffs consist of eleven terminate employees. Order lumber and all Relocation: Texas, Hawaii, New York, USA or call Thomas McAnally Supervisors and 330 hourly employees. production materiel. Coordinate weekly - South, USA - Western for Personalized Service The door plant operation dries lumber, production, sales and safety meetings. H i g h l y s k i l l e d c u s t o m e r s e r v i c e STRICTLY CONFIDENTIAL! cuts dimension stock, assembles and sands Research cost on purchasing new equipment. Representative for LGS software and the doors. The panel plant produces the Attended monthly city council meetings to design support. Past senior LGS and red veneered flat and raised center panels, ensure codes were followed. Oversee iron designer, and full plans drafting.

Attention Candidates! by cutting engineered wood and veneer development of truss fabrication facility. Experience includes plot to preliminary, Is your JobLine Candidate Profile from flitch and pressing the veneer to the Ensure compliance with Cal OSHA and red lines, submittal, construction packages, Presentation Ready? Request a Go to substrate. Both plants are equipped with Dot. Oversee shipping and optimize freight change orders, and as builds. Prior LGS Meeting on-line conference to review your costs. Responsible for training leads and software trainer. finishing lines. current JobLine Candidate Profile. We can supervisors on company policy’s. Program show you areas to improve, what’s hurting and operate computerized equipment.

ID: C11596 ID: C15857 your chances, and how to improve your Design Manager/Senior Designer - Truss/ISenior Truss Designer | Remote Truss message. The content is still all about you, Proficient with Microsoft Programs, Excel, Designer | Design Manager Joist/EWP but with this new tool, we can show you how Word, Outlook, ERP software Relocation: Quebec, Ontario, Alberta Relocation: California to make it tell your story better. See why Team growth and development through we say “It’s like having a first interview”.

Schedule design work (Roof and Floor) to effective feedback and ongoing mentorship Truss Designer. Primary duties: design, my design team, re-check all design prior to Excellent communication skills layout, optimization, cutting/production production, and training of my team. I also Experience working with: Metal, Polymer documents, and takeoff. Secondary duties: design roof and floor system for the custom Blends, Components, Finished Product checking others work, scheduling, repairs, home we get. I also get involve in sales as a Assembly, Clean Room, etc. customer service, inside sales, and field TheJobLine searches year around for technical representative. Software: MiTek, Tenacious, Professional, Detail-Oriented, measurements. Software used: MiTek and candidates that meet our employer ’s AutoCAD, Keymark, Alpine.

Strong Sense of Urgency AutoCAD. Component experience includes requirements. With our state of the art Lean Manufacturing Certified, Kaizen floor trusses, roof trusses, I-Joists, EWP, and website, multiple job board subscriptions, Distribue le travaille (Ferme de toit & Trained, Fork lift Certified hardware. Market experience includes tract, truss designer testing, and the JobLine Poutrelle de plancher) pour mon equipe, single family, single family custom, multi- candidate profile, we have the tools to do Agis comme personne ressource,fais la ID: C10789 family, and light commercial. My volume the job right, Guaranteed! verification final avant la production et Production Manager/Supervisor - Truss/ was varied depending on projects. Has used dessine les plans de montage du toit et du Panel MiTek, Alpine, AutoCAD, and Microsoft I have been doing this for over 23 years. plancher pour les maisons plus complex Relocation: Minnesota Office programs.

Because of my reputation for Strict assignee a mon equipe. J'ai aussi un role de 20 years experience. Responsible for all Confidentiality, I am the go-to Recruiter representant technique. Programme: Mitek, aspects of truss and panel production, The candidate has been out of the industry, for our industry.

AutoCAD, Keymark, Alpine inventory, performance reviews. 65 working in parallel jobs, and wants to return workers, $9M year. WTCA quality control to a design position. Scored Senior Designer Put me on your team and I will show you using an HP calculator, 8 years after his how having theJobLine as your “Recruiter certified.

ID: C15891 Compensation: $60's+ last truss design job. Speed was faster than Down the Hall” can solve your hiring needs.

Truss Production Manager | Supeprvisor average too. It may take a little time for Relocation: Colorado ID: C11427 him to get up to speed on the latest software.

Oversaw day-to-day operations of plant, Plant Manager | Senior (ACE) Truss Ranked 5 out of 5 in our system. trained new employees on all plant Designer/Estimating/Outside Sales | Design machinery, ensured plant met production Manager deadlines, shipping and receiving of Relocation: Texas

800-289-JOBS

Time To Hire?

Attention Employers

Don’t miss the perfect employee!

materials, loading of finished product onto trucks for delivery, documentation of managerial related records, forklift certified.

7 years' experience, began as a sawyer.

My objective is to utilize my experience in production work and building trusses, and working with a strong team in an established company. Continue to learn new procedures, PHONE: 800-289-5627

6 years experience as Plant Manager with another 6 years in Design (one of our very few ACE designers): Facilitated the truss sale, design, & delivery for lumber salesmen lacking truss experience. Developed own customer base by selling trusses. Design layouts of floor and roof truss systems for multifamily/commercial projects.

Read/Subscribe online at www.componentadvertiser.com

Talk to me today!

800-289-5627 x1 twm@thejobline.com

See What I can do for You!

FAX: 800-524-4982

JobLine.com, inc.

The

JobLine.com, inc.

800-289-JOBS www.thejobline.com

The

800-289-JOBS

ID: C12414 Truss Designer | Wall Panel Designer | All Hats Relocation: Arizona Engineered panel and truss design, developed material take off for turnkey build up, worked in coordination with multiple plants and design teams, worked closely with material suppliers on take offs and estimating.

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! Available Candidates ID: C11251 Management - Truss/Panel/EWP Relocation: USA - ALL States Oversaw all areas of operations and production as well as managers of those areas, a total of 35 employees. Led company from operating in red to the black in first year. Responsible for P & L. Brought labor percentage from 26% to 14-15%.

Increased gross margin by 10%. Led process of branching into new areas of structural building components in a strategic alliance with Keymark Enterprise.

Compensation: $60k+ ID: C15796 Production Manager - Truss Relocation: North Carolina, Florida 20 years experience. Oversaw all the Truss production and also the warehouse. In the Truss department, I made sure the line had what materials they needed to build, usually for the next days orders. I tried to keep them at least one day ahead, unless there were special orders. I made sure production quotas were meet. I helped to set budgets for the Truss and warehouse, then maintained that budget. In the warehouse, I made sure workers were pulling the orders correctly then also loading them correctly on the truck. I instilled a clean work area ethic in my employees. I hired, fired and trained all the truss department and warehouse employees. When needed I would get on the production line to help out, give breaks or to just have a little fun at doing my old job. Between the two departments I was responsible for approximately 40 people.

Built roof and floor trusses, loose lumber packages.

PHONE: 800-289-5627

I've worked for decades in the construction industry. Not only in new construction, but additions and remodels as well using innovative designs for added value and to drive down cost. In addition to experience with MiTek, Wallbuilder and other design software packages, I have extensive manual trig/math skills. I use these to back check questionable loads as well to design from scratch in the field when needed. I have also written tutorials for the training of others and checked other designer's work as a Design Manager at a Panel Plant. All things being equal, I love working in components whether designing, cutting, building or setting components at the site.

ID: C15763 Remote Truss Designer - MiTek, Multifamily Relocation: Kentucky Truss Designer with 3 years experience, Sapphire, AutoCAD, MBA, and some ITW software experience. "Looking to work for a well established truss company as a remote designer in both wall panels and truss design. I want to continue to grow my design skills so that I can be the best designer than I can be. I enjoy the design aspect of the job and look forward to working through projects one day at a time." Experience with residential, commercial, and multifamily design, with emphasis on multifamily.

ID: C10580 Sales/Senior Estimator/Estimating Manager - Truss/Whole House/Framing Package Relocation: Alabama, Florida, Georgia, Mississippi, Tennessee 6 years estimating experience. 4 with MiTek 20/20 and 2 with eFrame. Markets include Single Family Custom, Tract, Light Commercial and Multi Family.

Products include component framing packages and total project estimating.

Prepares hard construction estimates by means of manual and computerized takeoff methods. Extensive MiTek/Excel experience. Supervises monthly inventory audits for all truss department materials.

Maintains records for all received and processed quotes. Pre-engineers all plans for difficulty and profitability. Participates in cost studies to ensure a correct labor and pricing strategy.

From the Candidate: I am an overly critical estimator and my primary role is to make the company I work for money. I have quoted

Hiring Zone - Available Candidates from cocktail napkins, off cardboard, and the occasional professional engineers plan. I like the challenge of problem solving and finding effective building ideas and practices.

ID: C10810 Designer/Inside Sales - Truss Relocation: Virginia 6 years design experience, 1 inside sales.

Primary duties: design, layout, optimization, cutting/production documents, and takeoff.

Secondary duties: scheduling, repairs, customer service, inside sales, and field measurements. Software used: MiTek, AutoCAD, and CAD - Other. Component experience includes floor trusses and roof trusses. Market experience includes tract, single family, single family custom, multifamily, light commercial, and agriculture.

My volume was varied depending on projects. Past carpenter and framer. Has an engineering related associates degree/ drafting Compensation: $45k+ ID: C14506 EWP Designer | Estimator | Inside Sales Relocation: Virginia Experienced with AutoCAD, iLevel, TJ Beam, and TJ xPert software to produce framing layouts for TrusJoist engineered wood products. Responsible for working with builders and retailers to create the most cost effective solution for their project.

Creating quotes from layouts. Calculate gravity loads and sizing wood products to support the load. Understanding the IRC building code for wood-framed structures.

Explaining structural framing details to builders and salespeople. Training other designers in load development and design software.

ID: C12325 Truss Production Manager, Truss Plant Manager Relocation: Texas, Colorado, USA - Eastern, USA - South Daily responsibilities include staffing, organizing and distributing work onto plant floor based on reaching productivity goals, daily scheduling of in and outbound freight, coordinating deliveries with customers, quality and process audits, and daily safety audits.

Program lead for the execution of a second manufacturing facility development plan; completed on time and on budget.

Established initiatives that increased sales from $50k a month to $500k a month.

Responsible for logistical duties such as planning shipment, coordinating delivery with couriers, and keeping the customer informed of product arrival times of 10 to 25 truckloads weekly. Managed the inventory of items so as to stay within

Read/Subscribe online at www.componentadvertiser.com

September 2017 #10218 Page #78 the $500k lumber, $50k plates, and $35k non-manufactured budget requirements.

Developed and utilized Excel SS with past lumber market trends and current market reports to make bulk purchases, decreasing effects of lumber pricing spikes and maximizing profitability. Led QA teams and customers through the resolution of design and production errors, back charge resolution, and sales negotiations. Increased overall productivity by 40% through lean processes and best practice analysis.

Facilitated Root Cause Safety Investigations in regards to safety and equipment failures.

Increased plant output capacity from $250k a month to $1mil a month in primary facility.

Managed the sourcing and procurement of $1-3mil in raw materials, supplies, and equipment for the entire facility. Scheduled all in and outbound freight of approximately 25-50 truckloads weekly.

ID: C11239 VP Operations/Multi Plant - Truss/Panel/ EWP/Lumber Relocation: Texas Multi-plant operations manager with extensive P&L, executive, and operations experience. Responsible for 10+ locations, single family, multifamily, commercial.

More information available in resume and profile.

Compensation: TBD Thom's Notes: I have recruited for this candidate when he was VP of Operations over multiple plants. He rates 5/5 on our scale.

ID: C11348 Sales/Management - Truss/Panel/EWP/ Software Relocation: USA - Eastern, Florida, USA - South I have worked in the wood component business since 1980. Over the years I have worked for plate & Software Vendors, Truss Manufacturers, started my own truss business and have run other peoples businesses. I have pretty much done every job you can find in a truss plant at least to fill in when needed. My objective is to find a company where I can use my experience to help promote a profitable and safe work environment.

ID: C10199 Senior Designer - Truss/Panel/EWP/I-Joist/ Framing Package Relocation: California, Tennessee, Washington Candidate has 15 years industry experience, 4-5 years experience in this position, and 10 years in subordinate positions leading to this position. Products include floor trusses, roof trusses, wall panels, I-Joists, EWP, FAX: 800-524-4982

JobLine.com, inc.

The

800-289-JOBS www.thejobline.com

September 2017 #10218 Page #79

JobLine.com, inc.

The Hiring Zone - Available Candidates hardware, and complete framing packages. E n g i n e e r, S y s t e m s D e v e l o p e r a n d until markets started to slow down in the Markets include tract, single family, single Implementer of residential construction recession. family custom, multi-family, and light component processes ranging from cost commercial. Primary duties include design, controls, engineering design, manufacturing Thom's Notes: Is experienced with remote layout, optimization, cutting/production equipment, procedures, quality assurance design and is set up, ready to go. Needs to documents, and takeoff. Secondary duties and complete installation of the building work full time but may consider as a 1099 or include checking others work, customer components. regular employee. Scored equal to 13 years service, inside sales, software maintenance, of experience as a truss designer. network administration, training, and Plant Manager for a manufacturer of filling in for the Design Manager as engineered cold roll form steel structural ID: C15679 needed. Software experience includes components for the residential and light LGS Truss & Panel PE MiTek, Truswal, Comsoft/IBS, TJ Expert, commercial building industry. 2 foreman and Relocation: USA - Eastern, USA - South AutoCAD, and I am willing to learn new 15 personnel, managed sub-contractors for software. field erection and resolved field engineering As Engineering Manager I was responsible problems. for oversight of all technical and engineering

ID: C12220 Design/Design Manager - Truss/EWP/ Remote or at Plant Relocation: Pennsylvania Remote / Satellite Truss Designer Roof / Floor truss design utilizing Mitek Sapphire design software. Project estimating, including roof system, floor system, and wall panels. Responsible for 100% of quoting and preparations for production for our #2 and #4 clients. Maintained a database for a major tract builder, producing 5-8 house a week.

Truss & Engineered Wood Products Design Manager / Sales. Oversaw all aspects of Truss & Engineered Wood Products operations and sales. Maintained personal sales accounts, as well as developed new clients. Customer service from the quote stage to production, including verifying sight conditions and field measuring.

Produced production drawings and reviewed / corrected design staff, MiTek / Truss Joist software. Responsible for maintaining lumber / plate inventory.

ID: C12315 COO/CFO/GM/SM - Truss/Panel/EWP/ LBM Relocation: Illinois, Indiana, Kentucky, Michigan, Ohio Drove growth in Sales that necessitated recruitment of mid-level managers (Sales & Production) to help grow the Company.

Grew commercial and multi-family sales with over 100% growth in total revenue. Developed and implemented improved plant management and safety systems. Manage all operations including production management and scheduling, fleet procurement and management, all HR functions and all accounting/banking functions.

ID: C11264 Senior Management: Building Components/ Systems Relocation: USA - ALL States, Alabama, Arkansas, Colorado, Florida, Georgia, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Arizona Director of Field Operations/Field Engineering Mgr./Senior Manufacturing PHONE: 800-289-5627

Divisional President/Director of Operations for a$200M commercial building contractor.

Within two years managed start up of a separate self-sufficient profitable $5M manufacturing and erection subsidiary of engineered class-A steel and cold roll form steel structural components for the commercial and multi-family building industry. Directed 4 managers in all business operations and 60 personnel nation wide.

Member of a multi company design build teams to provide more economical construction projects.

ID: C10234 Outside Truss Sales/Technical | Estimator Relocation: Colorado, Wyoming 35 years construction experience, 25 in truss sales. Sells Trusses wholesale. Sells Trusses to Builders and Owner Builders and service the account through Design, Pricing, Production, Delivery, Installation, and problem solving. Also service National accounts which involves solving all the in-field problems. Dealing directly with the project Supervisor on missing trusses, damaged, missing plates, trusses don't plane, don't work, design errors, bad deliveries, dealing also with the building inspectors, and project engineers.

Will also consider a remote estimator position.

Compensation: Mid $30's base plus commission.

ID: C15690 EWP Designer - Remote Relocation: Minnesota EWP Estimator/Designer: Provide beam, header, column, tall wall drawings to sales,building officials, structural engineers, builder, and architects. Assisted sales team with value engineering, winning more jobs and increasing margin. Skilled at sizing LSL, LVL, PSL, I-joist, even dimensional lumber floor layouts.

engagements. Design of light gauge metal trusses, wall panels, shear walls, for hotels, retirement homes and other commercial and residential structures. Making jobs viable by replacing red-iron with light gauge metal was key to solidifying more projects. I was actively engaged in computer software development of truss design and coordinating overseas programming efforts into truss layout.

As Senior Technical Services Engineer, I held the nation-wide responsibility for all light gauge cold-formed steel truss engineering including field applied repair design. I provided technical advice and counsel to our staff and functioned as a subject matter expert (SME) for all three product divisions. As a result, I augmented my professional registrations to include 38 States, 1 District, and 1 Canadian Province.

ID: C15673 Outside Sales - Truss/EWP/I-Joist Relocation: North Carolina I was responsible for calling on builders and retail lumberyards selling floor and roof trusses, LVL, EWP and hardware. I would talk to the builder or lumberyard salesperson to see what there exact needs were and would then do a hand takeoff to generate pricing. I was also available do make job site visits if there were any situations that needed resolved. I went to my new employer as an Account Manager we used Mitek along with management software. I was able to take 95% of my existing customers that knew how good a job I always did for them.

I was able to grow the market from $0.00 to $2,500,000. I worked with track builders, custom home builders and light commercial.

With my education and passion for the building industry it was easy for me to do my job. I enjoy dealing with people, reading blue prints and being able to provide my customers with valued engineering, a quality product and outstanding customer service.

Prior experience as a Truss Designer: Used MiTek software to generate a layout and engineered truss drawings. I started in the shop, moved to layout and was cross trained to design. I provided truss sales support Read/Subscribe online at www.componentadvertiser.com

800-289-JOBS

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! Available Candidates ID: C15658 Senior Truss Designer Relocation: Saskatchewan As Design Manager: Primary duties: in house design staff supervision with a remote team (of designers) based in India, shop quality control, monitoring of work flow from sales to production and designer's training. Secondary duties: design, layout, optimization, and cutting/production documents checking others work, customer service, field measurements. Software used: MiTek and AutoCAD. Component experience includes floor trusses, roof trusses, I Joists, EWP, hardware, and lumber.

Market experience includes single family, single family custom, multi-family, light commercial, and agriculture. My volume was varied depending on projects.

As Senior Truss Designer: Primary duties: design, layout, optimization, and cutting/ production documents. Secondary duties: checking others work, scheduling, field measurements, and training. Software used: MiTek. Component experience includes roof trusses, hardware, and lumber.

Market experience includes single family, single family custom, multi-family, light commercial, and agriculture. My volume was varied depending on projects.

Canadian citizen, eligible for NAFTA visa.

BSCE

FAX: 800-524-4982

JobLine.com, inc.

The

JobLine.com, inc.

800-289-JOBS www.thejobline.com

The

800-289-JOBS

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! Available Candidates ID: C10042 Designer/Estimator/Inside Sales - Truss Relocation: Utah I have 8 years industry experience and 7.5 years experience in this position. Markets include tract, single family, custom, high end, multi-family, light commercial, and agriculture. Products include floor trusses, roof trusses, I-Joists, lumber, and complete framing packages. My primary duties include design, layout, optimization, cutting/ production documents, and takeoff. I was also responsible for checking others work, repairs, customer service, inside sales, field measurements, training, and filling in for the Design Manager as needed. Software experience includes MiTek, TJ Expert.

Compensation:$50k+ ID: C14608 Truss Designer Relocation: Florida My objective is to be a part of a Design Team where I can contribute to the success of the company. I like challenging projects, and consider it my job to complete my assigned work on time, not just punch a time clock and leave problems at the door. With that being said if needed I will put in extra hours to complete the task at hand. I got laid off as a truss designer back in 2007 and have done many things to keep food on the table. I have two years of Alpine experience as a designer and 4 years as a Truss Engineer II, plus 20 years of AutoCAD experience. Prior to that I was a layout designer for commercial floor plans and equipment. Please consider giving me a chance. I will work hard and get back up to speed fast. I have a certificate in Architectural Technology, plus training from Alpine, AutoCAD and Microstation.

September 2017 #10218 Page #80

Hiring Zone - Available Candidates ID: C10410 Outside Sales/Sales Manager/Product Manager - Modular/Building Components.

Relocation: Illinois, Wisconsin, California, Colorado, USA - Southwest, USA - ALL States, British Columbia, Florida, Idaho, Kansas, Kentucky, Quebec, South Carolina, Alberta, Canada - Western/Central Specializing in Sales Management, and Builder/Developer sales of Modular Homes and Engineered Building Components.

Market penetration, product management and project management specialist with over 15 years of experience. Works with Architects, Engineers, Building Inspectors, Manufacturers, and end users to develop, sell and produce projects including Tract Homes, Modular Homes (Single and Multi Story), and Component Packages. This is not a blue sky guy. He has hands on experience in Lumber Sales, Modular Home Sales, Builder/Developer Sales, and managing new products from concept, design, engineering, approvals, manufacturing, marketing, to successful sales programs. MBA: Marketing & Finance.

Compensation: Open based on job and location.

ID: C14490 General Manager | Operations Manager | Turn Around Relocation: Colorado, Delaware, Illinois, Indiana, Iowa, Kentucky, Maryland, Michigan, New Jersey, New York, North Carolina, Ohio, Pennsylvania, Tennessee, Virginia, Washington DC, West Virginia, Arkansas, Massachusetts, Minnesota, Missouri, Montana, North Dakota, Rhode Island, South Carolina, South Dakota, Texas, Wisconsin, Florida, Georgia, Idaho, Kansas Full P&L turnaround of a family owned light gage steel panel manufacturing company.

Turned it form a mom and pop, into a large, functioning manufacturing company that had systems, KPI programs, personnel development, and a growing customer base. Ready to help take your company to the next level.

ID: C12391 Senior Truss Designer, I-Joist Designer, EWP Designer, Remote Truss Designer Relocation: Georgia, North Carolina, Tennessee, Virginia, USA - ALL States Senior Designer with Sapphire and Alpine experience. 9 years in Roof Truss, Floor Truss, EWP, I-Joists, and has worked in a Sales/Design only location. Understands how to communicate remotely with the plant, sales, and customers. 1 year recent experience using MiTek Sapphire, 7 yrs experience with Alpine software. Is currently the go to person in the company for EWP, hardware(Simpson or USP), and technical truss design issues.

ID: C11856 Designer/Design Manager - Truss/Panel/IJoist/Stairs/EWP Relocation: Ohio 18 years Design experience with 3 as a Senior Designer. Primary duties: design, layout, and optimization. Secondary duties: checking others work and repairs.

Software used: MiTek Sapphire, Robbins, Keymark, and AutoCAD. Component experience includes floor trusses, roof trusses, wall panels, I-Joists, and hardware.

Market experience includes tract, single family, single family custom, multi-family, and agriculture. My volume was varied depending on projects.

ID: C11658 Designer/Design Manager - Truss Relocation: USA - South 10+ years experience. Worked on a teams of up to 10 truss designers. Worked daily with the truss design manager to schedule and manage work loads. Produced truss engineering, layouts for production based and custom builders. Also designed jobs for bidding purposes. Maintained several customer accounts. Worked on streamlining design processes by value engineering and varying layout designs to maximize efficiency for plant production. Ability to read and interpret blueprints. Strong spatial visualization. Strong mathematical and analytical problem solving skills. WTCA Level III. Used MiTek Engineering.

ID: C11976 Design/Estimating/Sales - Truss/LGS Relocation: New York Experienced wood & cold formed steel truss designer with 12 years experience using MiTek Industries and Aegis Metal Framing products and software. Seasoned sales professional with 8 years experience selling; wood roof & floor trusses and accessories, metal roof trusses and accessories, and the sale of component design and engineering services. A highly motivated designer and sales person with a proven track record for achieving excellence, building long term business relationships, and providing impeccable service to contractors, engineers, architects, and developers throughout New York and New England. Specialize in design build and defense contracting from early pre-bid/qualification stages through installation.

ID: C11501 Production/Plant/Location Manager - Truss/ Panel/I-Joist/Framing Package Relocation: North Carolina 20 years experience. Managed 6 different locations over 12 years. Started 2 panel plant from scratch.Increased production at all plants I managed. Was promoted to Manufacturing Manager in 2009 over multiple plants. Worked closely with the designers, became proficient with the MBA and MVP programs. Trained 3 different people to become plant managers.

Can operate all saws, computer systems, forklifts, trucks. Started up a Panel Plant in 2004. Plant Manager of the year two out of the three years the program was in place.

Only Manager to go two years in a row, at different locations with no accidents.

Compensation: $50-70k+ incentive with future opportunity for more.

ID: C11370 Production/Plant Manager - Truss/Panel/ Framing Package Relocation: Texas 19 years experience. Started in production, advanced to Saw Supervisor, Production Manager then Plant Manager. As Plant Manager (4 years), manage all the operation of the manufacturing plant, such as Productivity, logistics, efficiencies, costs.

As Production Manager (12 years), manage all the areas of the manufacturing across the plant. Safety, quality control, efficiencies, HR, etc... Software: MiTek, Word, Excel, OptiFrame. Products: R & F Truss, Panel, Framing package. Markets: Single Family, Multifamily, Custom Homes. Bilingual English/Spanish spoken and written. Degree in Industrial Engineering.

Compensation: $60's-70's+ ID: C10324 Plant Manager/Designer/Design Manager/??

- Truss/Panel/Installed Relocation: Georgia As Location Manager, managed one estimator, four designers, a secretary/ data entry person, and a shop of 40 truss production employees. As Senior Designer, primary duties: design, layout, optimization, and takeoff. Secondary duties: checking others work, scheduling, repairs, customer service, and training. Software used: Alpine and AutoCAD. Component experience includes floor trusses, roof trusses, wall panels, framed openings, I-Joists, EWP, hardware, lumber, and complete framing package. Market experience includes tract, single family, single family custom, multifamily, and light commercial.

Thom's Notes: Very experienced, willing to wear many hats.

Compensation: Very Reasonable PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #81

JobLine Compensation Calculators

Thomas McAnally The

JobLine

Back in 2006, we created a compensation calculator using data gained since we started recruiting back in 1992.

Multiple factors go into determining total compensation and we have calculators for Truss Designers, Sales Reps, and General Managers in the Truss Manufacturing Industry. Every year, we update current numbers and factors based on the previous year and current job opportunities. A recent calculation produced the results shown in the image on the right. The total was $74,658 based on an average 45 hour week.

The number is based on national data and does not take into consideration regional cost of living or tax structure. Because most of the jobs we have are Eastern and Central US, it is more accurate in Texas, Virginia, or Florida, than in California. Also since 2006, we’ve been asking each user how accurate the calculator is.

The column on the left represents the responses since inception. On the right, a shorter period is examined. What it tells us is that the results are very close given the High and Low responses are fairly even.

2006-2017

2014-2017

56% OK

56% OK

11% High

20% High

33% Low

24% Low

The percent of users who felt the rate was OK remaining at 56% is not bad, but there is always room for improvement!

Compensation calculators can be found on our website in the Tool Box

www.thejobline.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

Calendar of Events

September 2017 #10218 Page #82

When? | What? | Where?

SEPTEMBER 2017

September 10 – 12 September 13 – 15 September 19 – 22 September 21

ICC Annual Conference with Building Safety & Design Expo Construction Suppliers Assoc. (CSA) Annual Conference & Expo MiTek Builder Technology Summit Truss Manufacturers Assoc. of Texas (TMAT) Chapter Meeting and Golf Tournament

Columbus, OH Savannah, GA Naples, FL Spring Branch, TX

OCTOBER 2017 October 2 – 4 October 4 October 4 – 6 October 4 – 6 October 8 – 10 October 11 – 14 October 17 – 19 October 18 – 20 October 20 – 21 October 25 – 27 October 28 – 30 Oct 30 – Nov 1

2017 ProSales Connections Southern California Wood Solutions Fair Florida Building Materials Assoc. (FBMA) Convention and Trade Show Mid-America Lumbermens Assoc. (MLA) and Mountain States Lumber & Building Material Dealers (MSLBMDA) Fall Conference National Assoc. of Home Builders (NAHB) Building Systems Housing Summit National Council of Structural Engineers Assoc. (NCSEA) Structural Engineering Summit ProDealer Industry Summit METALCON Northeast Retail Lumber Assoc. (NRLA) Annual Meeting Building Component Manufacturers Conference (BCMC) APA – The Engineered Wood Assoc. Annual Meeting University of Texas Building Professional Institute (BPI) – 5th Central Texas

Dallas, TX Pasadena, CA Orlando, FL Kansas City, MO Hershey, PA Washington, D.C. Phoenix, AZ Las Vegas, NV West Harrison, NY Omaha, NE Huntington Beach, CA Austin, TX

NOVEMBER 2017 November 2 November 2 – 3 November 7 – 9 November 8 – 9 November 8 – 9 November 8 – 10 November 9 November 12 – 14 November 14 – 16 November 14 – 16 Nov 29 – Dec 1

Southeast Wood Solutions Fair American Institute of Building Designers (AIBD) Fall Conference Western Building Material Assoc. (WBMA) 115th Annual Convention University of Texas Building Professional Institute (BPI) – 5th Brownsville West Coast Lumber & Building Material Assoc. (WCLBMA) Annual Convention and 100th Anniversary Celebration Greenbuild International Conference and Expo Wisconsin Truss Manufacturers Association (WTMA) Chapter Meeting Specialty Tools & Fasteners Distributors Assoc. (STAFDA) Annual Convention & Tradeshow AHF Live: The Affordable Housing Developers’ Summit NAFCD + NBMDA Annual Convention JLC Live Northwest

Charlotte, NC Austin, TX Marysville, WA Brownsville, TX Rancho Mirage, CA Boston, MA TBA Austin, TX Chicago, IL Colorado Springs, CO Portland, OR

DECEMBER 2017 December 6 – 7

HIVE (Housing Innovation, Vision & Economics)

January 3 – 18 January 8 – 11 January 9 – 11 January 22 – 23

University of Minnesota 62nd Annual Institute for Building Officials Natl. Institute of Building Sciences (NIBS) Building Innovation Conference & Expo NAHB International Builders Show (IBS) Northwestern Lumber Assoc. (NLA) Building Products Expo

February 7 – 8 February 8 – 9 February 14 – 16

Building Material Suppliers Assoc. (BMSA) Annual Building Products Show American Institute of Building Designers (AIBD) Winter Conference National Frame Building Assoc. (NFBA) Frame Building Expo

Los Angeles, CA

JANUARY 2018 St. Paul, MN Washington, D.C. Orlando, FL St. Cloud, MN

FEBRUARY 2018

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

TBA Tampa, FL Columbus, OH FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

February 14 – 16 February 20 February 28

Adverti$er

Don’t Forget!

You Saw it in the

Northeast Retail Lumber Assoc. (NRLA) Lumber & Building Material (LBM) Expo Northwestern Lumber Assoc. (NLA) Iowa Lumber Convention Northwestern Lumber Assoc. (NLA) Nebraska Lumber Dealers Convention

September 2017 #10218 Page #83 Providence, RI Altoona, IA La Vista, NE

MARCH 2018 March 14 – 16 March 19 – 23

International Wood Products Assoc. (IWPA) World of Wood Convention ICC Educode

New Orleans, LA TBA

March 20 – 22

Mass Timber Conference

Portland, OR

March 22 – 24 March 27 – 28

JLC Live New England INTEX Expo

Providence, RI Orlando, FL

APRIL 2018 April 3 – 6 April 11 – 12 April 11 – 13 April 19 – 21 April 19 – 22

Lumbermen’s Assoc. of Texas & Louisiana (LAT) Annual Convention Atlantic Builders Convention (ABC) NASCC: The Steel Conference Structural Engineering Institute (SEI) Structures Congress 2018 Associated Building Material Distributors of America (ABMDA) Annual Convention

San Antonio, TX Altantic City, NJ Baltimore, MD Fort Worth, TX Orlando, FL

MAY 2018 May 8 – 10 May 8 – 10

National Hardware Show Industry Week Manufacturing & Technology (M&T) Conference & Expo

Las Vegas, NV Raleigh, NC

JUNE 2018 June 11 – 14 June 12 – 15 June 21 – 23

National Fire Protection Assoc. (NFPA) Conference & Expo Forest Products Society (FPS) International Convention American Institute of Architects (AIA) Conference on Architecture

Las Vegas, NV Madison, WI New York, NY

June 27 – 28

Pacific Coast Builders Conference (PCBC)

San Francisco, CA

AUGUST 2018 August 7 – 10 August 20 – 23

Building Officials Assoc. of Texas (BOAT) Annual Conference World Conference on Timber Engineering (WCTE)

October 7 – 10

Building Component Manufacturers Conference (BCMC)

Amarillo, TX Seoul, South Korea

OCTOBER 2018 Milwaukee, WI

Don’t see your event? Increase attendance and participation by listing your industry focused events here!

E-mail details and event web-link to Anna@componentadvertiser.org. We can’t guarantee space for all events, but all industry related events will be added on a space available and interest to our reader priority.

SHIRTSLEEVES DON’T JUST ROLL UP ON THEIR OWN.

To enhance productivity and profitability for our customers, we work closely with them to understand their needs, then dig deep to find the right solutions for greater success. Visit our website or call today. And give us the chance to get rolling for you.

www.WoodTrussSystems.com 765-751-9990

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #84

The Never-Ending Search for Truss Repair Information

By Kelly Sias, PE

Truss repair is one of the most frequently asked about truss topics. Not surprisingly, when we asked for suggested truss topics in a truss blog, truss repair made the list. Because the summer months bring about a peak in new construction – and plenty of truss repairs to go along with it – the beginning of June [was] the perfect time to visit this topic.

From trusses that get dropped or cut/drilled/notched at the jobsite, to homeowners who want to modify their existing trusses to add a skylight or create attic space to fire-damaged trusses, a multitude of scenarios fall under the broad topic of truss repair. This article focuses on various references and resources that can provide some assistance.

But first it helps to break down the broad “truss repair” topic into more manageable-sized categories.

New Construction vs. Recent Construction vs. Old Construction By far, the easiest type of truss repair is new construction, when the trusses either haven’t been installed yet or are still in the process of being installed. Whether the repair is relatively simple (e.g. a broken web) or a little more complicated (e.g. the trusses need to be stubbed), the beauty of new truss construction is that the truss manufacturer – and truss Designer – can be contacted and help with the repair. The truss Designer can easily open up the truss designs in the truss design software, quickly evaluate the trusses for the appropriate field conditions and issue a repair.

A good reference related to truss repairs for new truss construction is the Building Component Safety Information (BCSI) booklet jointly produced by SBCA and TPI. Section B5 of the BCSI booklet, which is also available as a stand-alone summary sheet, covers Truss Damage, Jobsite Modifications & Installation Errors. This field-guide document describes the steps to take when a truss at the jobsite is damaged, altered or improperly installed, common repair techniques, and the information to provide to the truss manufacturer when a truss is damaged, which will assist in the repair process.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #85

The next easiest truss type to repair is recent construction, where the trusses were constructed recently enough that: a) the truss plates are easy to identify, and b) the truss design drawings may even still be available. In these cases, design professionals other than the original truss Designer may be contacted to repair the trusses. For some types of repairs, the design professional can work off the truss design drawing to design the repair. Other times it might be necessary to model and analyze the truss using structural design software; alternatively, a truss manufacturer can be contacted to model the truss in their truss design software for a fee.

Often, the design professional wants to know the design values for the truss plates that were used to construct the truss. If there are truss design drawings available, they will indicate which truss plates were used in the design, and then the truss plate manufacturer can be contacted for more information. It is also easy to search for the truss plate code reports online (for instance, check icc-es.org). If no truss design drawing is available, there is still a way to identify the truss plates. Currently, there are only five major truss plate manufacturers in the United States, and they are listed on the Truss Plate Institute website. That makes identification of the truss plates used in recently constructed trusses easier because all of the current manufacturers’ plates will have markings that are described in their code reports. (Note that there are also a couple of truss manufacturers in the U.S. that manufacture their own truss plates.)

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #86

Finally, the most challenging type of trusses for truss repairs are those found in older buildings. Design professionals involved in these types of repair often aren’t sure where to start. Truss design drawings are often not available, and the act of trying to identify the truss plate manufacturer is challenging at best, unsuccessful at worst.

As a point of reference, there were 14 truss plate manufacturers that were TPI members in 1987 (see image), and only one of those companies is still in the current list of five companies. Therefore, the truss plates found in a truss built around 1987 will be difficult to identify. One option is to contact TPI and see if they can point you in the right direction.

TPI member listing from a 1987 publication

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #87

Simple vs. Complex Repairs Another way to break down truss repairs is to divide them into easy and challenging repairs. People often ask for “standard” truss repair details. Unfortunately, standard details only address the simplest types of repair; and those usually aren’t the types of repair that are asked about. Details simply cannot cover the wide range of truss configurations and every type of repair situation.

Sample repair detail for a simple repair

With the exception of simple repairs, most truss repairs rely heavily on the judgment and experience of the design professional doing the repair. And because there are not entire textbooks devoted to truss repair (that I am aware of, anyway), Designers must pull from a variety of resources, both to learn more about truss repair and to design the repair. For repairs using plywood or OSB gussets, the APA Panel Design Specification is a must-have reference.

Some people prefer to use dimension lumber scabs for their repairs, whenever possible, simply because they are more familiar with dimension lumber (and the NDS) than they are with Plywood/OSB or the APA Panel Design Specification.

Next, the fasteners for the repair must be selected and the allowable loads determined. For nail design values, I am a big fan of the American Wood Council’s Connection Calculator, which provides allowable nail shear values for just about any combination of main and side members that you can think of, including OSB and plywood side members – particularly handy for truss repairs. For more complex repairs, and especially repairs involving higher forces, an excellent fastener choice is a structural wood screw such as our Strong-Drive® SDS or SDW screws.

When I worked in the R&D department at Simpson Strong-Tie, a frequently asked question was whether we had double-shear values for our SDS screws. The questions always seemed to come from Designers who wanted them for truss repairs. Fortunately, we do have double-shear values for our SDS screws. You can find them in our Fastening catalog.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #88

Fire-Damaged Trusses and Truss Collapses These situations are in a category by themselves because they go beyond even the most complex repairs involving a major modification to the truss. The biggest difference is that the latter case involves mostly known facts and perhaps some conservative assumptions, whereas damage due to fire or collapse includes many unknowns. Most of the truss Designers I have spoken to about truss damage due to fire or truss collapse often recommend replacement of the trusses rather than repair because it is usually too difficult to quantify the damage to the lumber and/or joints.

In fires, there can be “hidden” damage due to the sustained high temperatures, while the truss appears to have no visible damage. Likewise, in a truss collapse, not only may there be too many breaks in the trusses involved in the collapse, but there may also be trusses that suffered severe stresses during the collapse and have damage that is not visible. To attempt a repair in either of these cases often requires an inspection at the jobsite, and the result may still end up being replacement of some or all of the trusses. Therefore, the cost of a full-blown inspection should be weighed against the cost of replacing the trusses.

The Structural Building Components Association website has a page with information pertaining to fire issues. It includes a couple of documents related to fire damage that are worth checking out.

Beyond the Blog: Where to Get More Truss Repair Information The best bet for getting practical design information related to truss repairs is to keep an eye out for short courses, workshops or seminars. ASCE has hosted a Truss Repair Seminar (Evaluating Damage and Repairing Metal Plate Connected Wood Trusses) in the past and may very well offer something like it again. Virginia Tech hosted a short course on Advanced Design Topics in Wood Construction Engineering, which included a section on Wood Truss Repair Design Techniques.

This article, “The Never-Ending Search for Truss Repair Information,” appeared first on Simpson Strong-Tie Structural Engineering Blog. To sign-up to receive the Engineering Blog in your inbox, go to seblog.strongtie.com/subscribe.

Copyright © 2017 Simpson Strong-Tie Company Inc. All Rights Reserved

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #89

News & Announcements

Builders FirstSource announces Floyd Sherman to step down as CEO at end of year DALLAS, Aug. 09, 2017 (GLOBE NEWSWIRE) – Builders FirstSource, Inc. (NasdaqGS:BLDR) today announced that CEO Floyd Sherman, age 78, has advised the Company’s Board of Directors that he intends to step down as CEO effective January 1, 2018.

In accordance with the Company’s succession plan, Paul S. Levy, Chairman of the Board, confirmed that the Board intends to appoint Chad Crow, currently President and COO of the Company, as President and CEO effective January 1, 2018.

Mr. Levy commented, “Today we are formally announcing the transition of Builders FirstSource leadership. Floyd’s stewardship of Builders FirstSource began in 2001, only a few short years after the Company was founded, when Builders FirstSource was at a critical point in its development. Floyd’s vision, leadership and execution were instrumental in creating the business we have today. Through his 16 years of leadership, Floyd has effectively guided Builders FirstSource through industry downturns, numerous business changes and the successful acquisition and integration of ProBuild, and, today, we announce this transition at a time when the Company is producing record results. We owe a great debt to Floyd for his brilliant leadership and his unwavering determination to make our Company the success it is today. We are very pleased that he will remain on the Board of Directors through May 2018, and serve as an employee advisor to the Company through March 2019.

Commenting on the transition, Mr. Sherman remarked, “I could not be more proud of what we have built at Builders FirstSource. I am confident in Chad Crow’s leadership, and know I am leaving the Company in very capable hands. Over Chad’s 18 year tenure, he has been involved in all aspects of our operations, including serving as CFO for seven years and COO the past three years. He was instrumental in taking the Company public, guiding us through the worst housing downturn in history, and setting Builders FirstSource on a positive growth trajectory. His extensive industry experience, knowledge of our operations, and respect for our people, will be invaluable assets as the Company implements its growth strategy in the coming years.”

About Builders FirstSource 2016 Sales: $6.4 Billion

|

Associates: 14 Thousand

|

Operations in 40 states

Headquartered in Dallas, Texas, Builders FirstSource is the largest U.S. supplier of building products, prefabricated components, and valueadded services to the professional market segment for new residential construction and repair and remodeling. We provide customers an integrated homebuilding solution, offering manufacturing, supply, delivery and installation of a full range of structural and related building products. We operate in 40 states with 400 locations and have a market presence in 75 of the top 100 Metropolitan Statistical Areas, providing geographic diversity and balanced end market exposure. We service customers from strategically located distribution facilities and manufacturing facilities (certain of which are co-located) that produce value-added products such as roof and floor trusses, wall panels, stairs, vinyl windows, custom millwork and pre-hung doors. Builders FirstSource also distributes dimensional lumber and lumber sheet goods, millwork, windows, interior and exterior doors, and other building products. For more information about Builders FirstSource, visit the Company’s website at www.bldr.com.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #90

News & Announcements

For Immediate Release August 2017

Rochester, MN—Acer Inc. is pleased to announce the latest improvements to its lumber retrieval systems. Known for building lumber handling equipment for wood truss and wall panel manufacturers, Acer Inc. is committed to providing its customers with reliable products designed for efficiency and productivity.

Our machinery feeds lumber to automated saws, speeding production and reducing labor costs. Our flagship product is the Ranger RS, a fully automatic Laser Guided Lumber Retrieval System designed to complement a linear-feed saw. The advanced design and quality construction of the Ranger RS make it the leader in automated lumber feed systems. Our engineering staff can optimize the machine for your plant with different loading configurations and storage capacities. The autonomous operation saves on labor costs, because the saw operator can oversee the Ranger RS. Always looking for innovative improvements to our system, we are proud to present the latest new features to our Ranger RS lumber retrieval system: • Crown detection on the fly—each board is scanned and flipped if necessary for consistent crowning.

• Queue up to 12 2x4s on the deck to keep the saw working while lumber carts are restocked.

• See available inventory at a glance—automatic laser scanning determines and displays actual board quantity in each station.

• Board-width verification measures each board and ensures proper width to reduce errors.

• Enhanced diagnostics and operator display in the all-new software package.

The advanced Ranger RS will set the pace of production in your plant. Contact us at (507) 288-9506 or sales@ acerinc.com to learn more about how Acer Inc. can help improve the speed and accuracy in your plant and add to your bottom line.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #91

News & Announcements 5 Ways to Celebrate Professional Women in Building Week

Posted August 28, 2017 on NAHB Now | The News Blog of the National Association of Home Builders.

Reprinted with permission.

NAHB’s Professional Women in Building Week, Sept. 18-22, is an opportunity for members across the Federation to bring awareness to the vital contributions of talented women in the residential construction industry.

Make plans now to celebrate this week in your community. Here are a few simple ways that members and HBAs can honor these trailblazers in our industry:  Highlight the important and growing role of women within the industry at a membership meeting or community event.

Share their contributions in a newsletter or website.  Plan a local event that honors women whose achievements benefit the home building industry and their community.  Change your profile picture on Facebook, Twitter or other social media platforms for the week. Download the PWB Week graphic at nahb.org/pwbweek and use it to spread the word.  Write an article for your local paper or a blog post for your website that shares resources to encourage women to pursue careers in engineering, skilled trades and other professions that support the home building industry.  Make a contribution to the NAHB PWB Building Hope Scholarship Fund or the National Housing Endowment/NAHB PWB Strategies for Success Scholarship program, which support young women and students pursuing industry-related education.

Get more ideas and resources for celebrating at nahb.org/pwbweek.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #92

News & Announcements New Hanger for Two-Hour Fire-Rated Walls Easily Installs Before Drywall

Pleasanton, Calif. – The new DG fire wall hanger series from Simpson Strong-Tie, an industry leader in engineered structural connectors and fasteners, is ideal for Type III multi-family, multi-level building construction and easily installs on a twohour wood stud fire wall during framing – before the drywall is in place.

The new series includes three models of top-flange hangers that connect floor joists to the wood wall and feature enough space for two layers of 5/8” drywall to be installed later. The completed fire wall assembly remains continuous from floor to floor. All three fire wall hangers have been tested according to ASTM E814 standards to verify that the hangers do not reduce the two-hour assembly rating, and therefore each of the DG hangers received F (flame) and T (temperature) ratings for use on either or both sides of a wall.

“With the increasing popularity of Type III multi-story wood construction, it’s more important than ever to ensure that these large, multi-family buildings are constructed with the safest, strongest, most rigorously tested products,” said Sam Hensen, vice president and general manager of Connectors at Simpson Strong-Tie. “Specifying and installing this product will help our customers streamline their workflows on the construction site while adhering to the strict code requirements for load and fire safety.”

Key features of the DG fire wall hangers include: • A gap wide enough to install two layers of 5/8” drywall • The ability to frame the entire structure before starting drywall installation o Published listing by Intertek for the DG series in a 2-hour wood fire wall • Including F (flame) and T (temperature) ratings per ASTM E814 testing • No need for additional restraint against rotation of the wall top plates • Can be used on 2x4 and 2x6 walls • May be used on both sides of a 2x6 wall

To learn more about DG fire wall hangers, including installation information, load ratings and model sizes, visit strongtie.com/ firewallsolutions.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #93

News & Announcements

Simpson Strong-Tie Donates to Clemson University Institute to Support Wood Products Building Industry Advancement Pleasanton, Calif. – Simpson Strong-Tie, the industry leader in engineered structural connectors and building solutions, announces its support of Clemson University’s Wood Utilization + Design Institute with a $50,000 donation.

The Institute brings together foresters, architects, engineers and other building industry professionals to design advances in woodbased products through education and training, product research and development, and development of technical and design solutions.

“Simpson Strong-Tie has been a strong supporter of Clemson University’s work in wood construction for many years, with sponsored research, product donations and other projects,” said CEO Karen Colonias. “We are pleased to continue our support by funding the Wood Utilization and Design Institute.”

A representative from Simpson Strong-Tie will also serve on the institute’s advisory board and work with other board members to shape the direction of the institute.

“Clemson’s WU+D Institute is delighted to have the support of Simpson Strong-Tie. Innovation in wood products is intimately linked to innovation in fasteners and connections. The support financially and intellectually of Simpson Strong-Tie allows us to be on the cutting edge of the next generation of wood building products and systems,” said Patricia A. Layton, director Wood Utilization + Design Institute.

The Wood Utilization and Design Institute is a multidisciplinary entity established in 2013 to educate, conduct research and provide continuing education of stakeholders across the wood industry. Researchers with the institute currently are testing cross laminated timber to determine burn rates, wind resistance and structural load.

Simpson Strong-Tie joins an impressive cohort of founding partners for the institute, including Huber Engineered Wood Products; Collum’s Lumber Products LLC; SmartLam; Mac Rhodes, a South Carolina timberland owner; and Weyerhaeuser Co. The forest industry has a $21 billion impact on the South Carolina economy. More than two thirds of land in South Carolina — 12.9 million acres — is forested. The Clemson University Wood Utilization + Design Institute is strategically positioned to drive the development, demand and utilization of wood products, as well as address industry’s needs for the next generation of talent.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #94

Solea Cedar Park

by Stream Realty, Cedar Park, TX Trusses Designed and Manufactured by Panel Truss

Design of the Day

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

September 2017 #10218 Page #95

The Last Word...

Straightening Crooked Southern Pine

Joe Kannapell - Senior VP MiTek Industries, Inc. www.mii.com

F

inally we are learning what the Canadians figured out: how to maximize the use of Southern Pine (SP) lumber. We are advancing truss equipment while they are transforming sawmills to enhance the quality of this once too-crooked product.

The Canadians are replaying the strategy that enabled them to begin capturing a lion’s share of the truss chord market in the 1970s. Back then, they used machines to select a competitive product, 1650f MSR SPF, from the mixed bag of weak and strong Canadian timber species. Today, they are using ultra sound and vision technology to produce a consistent MSR product from the SP mills they’ve acquired. And just in time to replace the higher grade lodgepole pine product that was depleted by the pine beetle.

We are developing truss machinery to improve truss quality on several fronts. For the first time, at BCMC, we will demonstrate automated lumber crowning prior to cutting, minimizing truss-to-truss variability. And when lumber reaches the saw, our Blade linear saw further improves the accuracy of cuts three ways:  Grabbing boards tightly and holding them directly adjacent to the saw blade, instead of 8 to 10 inches away, as is the case with pinch roller feed systems. This further reduces bowing of boards between infeed roller and the saw blade.  Using a sonar-operated Crooked Lumber Sensor to insure centerline cuts even with warped members.  Cutting boards edgewise, in the same orientation as they are installed in roof trusses, not flatwise.

Additional quality improvements are realized with automated jigging, laser imaging, and trackless gantry roller systems.

For long spans, widely spaced agricultural applications, and attic spaces, Southern Pine will continue to be the prevalent structural solution. With modern grading and fabrication machinery and good in-plant quality control, this strong domestic resource will well serve the component industry.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982