December 2015 Advertiser

A #

197

December 1st 2015 #08197

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Merry Christmas From The Advertiser & Our Contributors!

Page 2

www.mitek-us.com/planxreview

Component Manufacturing Advertiser

December 1st, 2015

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Inside

Published Monthly Editor/Publisher

New & Used Equipment

Saws .....................................................4

Truss Equipment ...................................................13

Panel Equipment ...................................................24

Trucks & Trailers ...................................................31

Misc. Equipment ...................................................31

Door and Stair Equipment .................................................35

Parts House .................................................. 36 Products

Plate Exchange ...................................................36 Fasteners ...................................................37 The JobLine Hiring Zone

Available Jobs ...................................................44

Available Candidates ...................................................46 Business Directory ...................................................48

Thomas McAnally twm@componentadvertiser.org

Marketing/Advertising

Anna L. Stamm 800-289-5627 x 3 anna@componentadvertiser.org

Distributed FREE

Via e-mail subscription Download PDF or Read on line at www.componentadvertiser.com News of interest can be submitted to: twm@componentadvertiser.org An Open Forum for many sources.

Deadline is the 25th of each month.

Industry Articles, Trade Names, and Logos are the property of their respective owner or creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional.

Believe it at your own risk Copyright 2008-2009-2010 -2011-20122013-2014-2015

Component Manufacturing Advertiser 1723 Colonial Drive Green Cove Springs, FL. 32043

no reproduction in whole or in part without permission from the component advertiser eMagazine Reading options You have two options with the Advertiser, 1 or 2 page display. For smaller screens, tablets and phones, we offer a 1 page link in the weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon. Don’t forget the PDF download option on our website.

Archive Copies Available On Line www.componentadvertiser.com PHONE: 800-289-5627

Contributors

Question of the Day .....................................................4 Advertiser Forum ...................................................10 Todd Drummond Consulting, LLC .................................................11 Alpine / ITW ...................................................14 SQ-1 Maintenance Technicians ...................................................21 Rod Wasserman ...................................................32 Layman’s Lumber Guide ...................................................38 News & Press Releases .........................................36,41,42 Safety First Topics in English/Spanish ........................................43

Directory

a division of

JobLine, Inc.

the

Adverti$er

December 1st, 2015 #08197 Page #3

Alpine/ITW ....................................14,15,33,39 Apex Machine Works .................................................. 13 Autozen Automation .................................................. 18 Component Runner .................................................. 48 Fitzgerald Group .................................................. 20 Layman’s Lumber Guide ........................................ 40,41,42 MiTek ................................ 2,20,31,32,49 Panels Plus ............................................. 25,27 Salter Associates ............................................. 11,48 Simpson Strong-Tie .................................... 4,8,9,37,38 Square 1 ................................... 12,16,17,21 The JobLine ......................... 11,36,44,45,46,47 Todd Drummond Consulting, LLC ......................................... 22, 23 Wasserman & Associates 5,6,7,13,24,28,29,30,32,34,35,36,48 Wood Truss Systems .....5,6,7, 10, 18,19,20,24,26,34,48

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

Question of the Day

Exempt Structures, can I really do anything I (or the customer) wants when no one is looking over my proverbial shoulder?

Stan Sias - National Manager

This question would be funny, if it were not so sad. Exactly what are exempt structures exempt from? Many jurisdictions make accessory buildings (storage sheds, agricultural building and the like) exempt from the permitting process and therefore exempt from the normal on-site inspections. But does that mean that anything goes? No! Many of the same jurisdictions that exempt these structures from the permit /inspection process also specifically state that the construction must meet the codes and standards in place in the said municipality (see example language below from Boulder, CO).

Plated Truss Industry at Simpson Strong-Tie

Let’s make one thing perfectly clear; Mother Nature has no idea whether your structure is exempt! Gravity, wind, snow and seismic events happen, and when they do nothing is exempt! Not only are these structures not exempt, but they are liability suits waiting to happen when the inevitable ‘gravity storm’ occurs. I call it a gravity storm because it is often during one of the aforementioned naturally occurring events that the structure all-of-a-sudden has an uncontrolled desire to get close to the ground. Yes, you heard it here first; gravity happens! Structures that have not been designed or constructed to meet the assumed demand loads for the jurisdiction in which they were constructed are always the first to go.

In some instances, folks knowing that they are not subject to inspection will choose to save time and/ or money and try to outsmart Mother Nature. Rarely does this work in the long run and quite frequently the results are seen even before the project is finished, as we see in the two scenarios below.

Walls stayed Up....

but the un-braced trusses came down

Trusses stayed upright...

but the un-braced sidewalls came down.

In other instances we see joist, columns and or headers/beams incorrectly sized and becoming unsightly before failing completely. Sometimes it is a collapse in the middle of the winter because adequate snow loading wasn’t taken into account. The scenarios are endless; the results are the same.

It is one thing for a homeowner to cut corners on something they are constructing for themselves. It is quite another thing to become part and party to this activity if you are supplying or constructing the project for someone else. You can bet that when the gravity storm strikes the owner and their insurance company will be going after anyone and everyone even remotely attached to the construction. There will be no memory about conversations involving cutting cost or as cheap as possible, and if that structure is not up to code, you could become liable. Stick to your guns and stick to the code, exempt or not! Thanks for reading, SS PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

December 1st, 2015 #08197 Page #4 SAWS

2004 TCT Model 1100 Linear Saw Cut 2x4 and 2x6 Lumber from 3” to 20’.

Tops, Bottoms, Webs, Sliders, Wedges and Scissor Bottoms. 230 Volt / 3 Phase 5 HP Motor with 24” Blade. Ink Jet Printer. Scrap Conveyor. $36,900 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2003 Alpine AutoMill SC Saw (ONT) Alpine model 348A, five-blade, servocontrolled computerized saw, sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touchscreen input. It has 23 axes of automated movement, enhanced diagnostics and auto management reporting. The SC cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [3] 18", [1] 20" and [1] 32" blades with air brakes, over $15,000 in spare parts, pc and enclosure.

Installed and operational. Floor mounted conveyor and incline shown in pictures are not included. 480v/60Hz/3Ph power.

Price: $65,000, Location: ONT. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1998 Koskovich Auto Omni Component Saw This saw h​ as been well maintained, and consistently upgraded throughout its service history, includes belt-style waste conveyor with side pans, digital inclinometers, spare set of blades, spare transport side motor, 1 KB card for out feed rollers, several spare circuit boards, and all other available spare parts. PC runs Windows 7 OS, current Omni Software from OEM. 220v, 3 phase e​ lectrical. $17,990, FOB MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #5

Don’t Forget!

You Saw it in the

Adverti$er

SAWS

NEW! 2004 Koskovich Omni Miser RT ​ inear saw with roof truss cutting software, L servo controlled angulation axis of movement, includes crooked lumber sensor, print system A (one face), rebuilt Auto Deck in 2010 to accommodate up to 20’ stock, 2x3 through 2x12 material), automated lumber advance (LASM), auto exit roller, belt-style waste conveyor, 5 HP 3450 RPM arbor motor, computer monitor (Windows XP Service Pack Three) with OEM console.

Includes (7) spare blades, miscellaneous spare boards, cables, air cylinder, belts, and all available system spares. 120/240v Single Ph. And 208/480v, 3 Phase power, 90 PSI air required. Well maintained throughout its service life, currently in daily operation.

Price: $69,990. Location: MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 Alpine AutoMill SC Automated Component Saw Automated (via design software output) or Semi-Automated (via touch screen) Set-Ups. Servo controlled for fast set-ups (2 to 15 seconds), accuracy and system dianostics. 23 Axes of Automation. 1-20” Blade, 3-18” Blades and 1-32” Blade cut 2x3 thru 2x12 Lumber. Excludes Incline Waste Conveyor. Includes $15,000 in Used Parts. $65,000 FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Razer v4 Linear Saw Six-Axis CNC Linear saw – Currently in operation and consistently upgraded this saw features a 6000 RPM hydraulic saw motor, full axis of motion to complete straight, single/compound bevel and rip cuts with a 13 3/4” blade. Handles material up to 20’ long, 14” wide and 4” depth. OEM supplied in-feed deck and outfeed conveyor with kick-off table are included. Right to Left hand feed configuration. Includes spare blade, encoder, (2) encoder wheels, sensor cables, and all available spare parts.

Includes Windows XP Service Pack two software and transformer for 230 or 600v to system specific 415v, 3Ph, Minimum 100 psi air required. (Ink jet printer shown in pictures is not included.) $79,990 FOB MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

(FOB IN) $44,975 800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

MANUFACTURERS’

2000 Alpine AutoMill RS Component Saw Alpine AutoMill RS model 344, five-blade, computerized component saw. From the OEM literature: sets up in 2 to 19 seconds, using a touch screen for ease of operation.

Five-head automated component saw works in semi-automated control via touchscreen input. It has 19 axes of automated movement, diagnostics, auto management reporting. The RS cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [3] 18", [1] 20" and [1] 32" blades with air brakes, pc with swingarm cabinet and scrap conveyor under saw.

480v/60Hz/3Ph power. $31,249, FOB: QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 Omni Miser Saw Automated Wood Processing System.

Lengths to 16’. Ink Jet Print System A (One Face). Incline Live Deck. Bunk Feeder. (5) 2x4 Magazines. Installation & Training omponent anufacturing is available at additional cost. $67,500 NOW $49,500 FOB MN Serving the Structural Building Components Industry Wasserman & Associates 800-382-0329 www.wasserman-associates.com

A

C M dverti$er

PHONE: 800-289-5627

New Spida Vector Saw with Mango Plate Marker

REPRESENTATIVES

NEW!

Monet FWA 500 Floor Web Saw

New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches to four foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade. Option for longer carriage length, single sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor. 440 volt, 3 phase. $49,000 Base, FOB MO.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Wood Truss Systems

MANUFACTURERS’

December 1st, 2015 #08197 Page #6

Adverti$er SAWS

REPRESENTATIVES

NEW!

New Hundegger SC-3 Linear Saw Hundegger Speed-Cut SC-3 linear truss saw, complete roof truss, I-joist, EWP, stair stringer and wall panel parts cutting functions including angle and bevel drive unit with auto-loading conveyor system, auto-discharge and Ink-Jet marking. Multiple boards or I-joists can be stacked up to 4 high and accurately processed. Can process any length of material with finished parts up to 26' in length. The SC-3 processes lumber from ½"x 1 ½" to 8" x 17 ¾". The 26" carbide-tipped saw blade can rotate 360 degrees and bevel to 0 degrees horizontally. Includes 3D BIM software. The optional 4-axis rotating mill can hold up to three different milling tools. Vertical end mill, double-bevel mill, vertical drill, horizontal slot cutter and double mill options are available. According to Hundegger USA: "The Hundegger Whole House Saw TM is a computer numeric controlled (CNC) saw capable of cutting a wide range of roof, floor and wall framing components, including wood I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam". Maintenance program, tech support and installation are available from Hundegger USA. 480 volt , 3 phase electrical. SPECIAL PRICE INCLUDES: Shipping anywhere in the lower 48 states, installation, training, duty. $209,000 Base Price

765-751-9990

NEW!

www.woodtrusssystems.com

Reconditioned 1995 Auto Omni Component Saw Price: $86,900 :: FOB OH Condition: Good+ 1995 Koskovich Auto Omni saw. 5-blade automated saw fully frame-off reconditioned to nearly new standard with upgrades in 2015. Includes shaker waste conveyor with factory side pans, [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20’ to 9” @ 90°/90°, spare blades, remote monitor, full set of electronic spares and manual. New computer with updated software, flat screen monitor, entire saw is newly painted. Also included: Full 3-month parts warrantee if installation is performed by independent tech. Geoff Monger.

208/240/480 volt,3 phase, 100 Amp and 120 vac, 90 Amp electrical required. Photos show saw during restoration.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

A

Component Manufacturing dverti$er

$48,600 FOB IN

Serving the Structural Building Components Industry

2005 Apollo Saw with Mango Plate Marker 5.5 HP Motor with 18” Blade. Minimum Angle of 10 Degrees with 36” Stroke.

Manual Saw Angulation with Air Brake on Automated Apollo Saw with Truss Software Turntable. Laser Pointer, Variable Stroke Solid 48” x 72” Frame and Arm Construction Minimizes Flex on the Saw Frame. Direct Limiter & Plexiglass Shield for Operator Drive 7.5 HP Motor with 18” Blade (230/460 Volt). Minimum Angle of 10 Degrees Safety. Automated 20’ Length Stop & with 36” Stroke for Long Scarf Cuts. Automated 160 Degree Angular Movement.

Plate Positioner as directed By Design Variable Stroke Limiter & Plexiglass Shield for Operator Safety. MDF Profiled Saw Software. Computer, Monitor & Cabinet Bench Top Provides a Safe Working Platform. Dust Extraction Outlet. 20’ of MDF Enclosure. MangoTech Plate Cutting & Bench Top with Automated 20’ Length Stop & 10’ Gravity Conveyor. Workstation, Marking Software. 30’ of Roller Conveyor Control Cabinet Enclosure & 17” Touch Screen Integration. Serial Control System. with Stands. Add $11,285 for Touch Screen Includes all Plug & Play Wiring. MangoTech/Spida Truss Cutting Software. Add Computer Upgrade. Add $3,680 for 2 Day $3,680 Two Day Onsite Installation & Training. Add $750 for 12 Month Phone & Onsite Installation & Training. Excludes Virtual Tech Support. Add $275 for Spare Blade. Add $558 for Saw Laser Guide. Add Dust Collection System. $15,000 FOB PA $890 for Dust Collector Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627 Read/Subscribe online at www.componentadvertiser.com

800-382-0329 | www.wasserman-associates.com

2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $49,900 FOB AB NOW $39,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 TCT EZ Trimmer Model CT041-2000. New Variable Speed Drive & Push Cylinder with Linear Slide.

2x3, 2x4 & 2x6 Capacity, Double Bevels on Pitches from 0/12 thru 12/12. Cycle Time: 15 Pieces / Minute. Air: 9 CFM at 80 PSI. Electrical: 230 Volt / 3 Phase / 20 Amp / 5 HP Motor. $8,900 NOW $7,900 FOB FL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1999 TimberMill 6-20 Pro Component Saw Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12” up to 20’-0”. Base Plane Referencing and Pivot Axis Elevation for Faster Setup and Greater Accuracy.

Powered Angulation & Carriage. Single Sided Digital. Waste & Incline Conveyor.

480 Volt / 3 Phase. Excludes Live Deck. $25,000 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

2000 Monet DeSauw B500 XE Component Saw 2000 Monet Desauw B500 XE component saw features semi-automatic user interface with backup mechanical indicators. This saw comes complete with a 12' x 16' 4-arm CMF live in-feed deck. The B500 XE features grouped functions such as automatic blade alignment for chords or webs and automatic centerline adjustment of nominal board size. Other saw features include over travel protection, pneumatic blade brakes on all 5 blades, safety fencing, shaker pan scrap system, scrap incline, manual skate-wheel infeed stands, and spare set of blades. 18" minimum cut, 20' max.

480 volt, 3 phase.

Price: $38,990 NOW $28,990 :: FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

PHONE: 800-289-5627

Adverti$er

SAWS

2005 Alpine AutoMill SC Saw Five-blade, servo-controlled computerized saw, sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. It has 23 axes of automated movement, enhanced diagnostics, auto management reporting.

The SC cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [4] 18" and [1] 32" blades with air brakes, yellow outfeed skatewheel conveyors and pc, carriage and cabinet compressed air connections (for cooling & dust buildup prevention). Installed and operational. 480v/60Hz/3Ph power.

Price: $89,990 :: FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

A

December 1st, 2015 #08197 Page #7

MiTek Combi Set Web Saw Four Blades Cut Lengths from 2' to 16'. Waste & Incline Conveyor. Extra Set of Blades. 220/440 Volt - 3 Phase. $13,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Alpine AutoMill SC Saw Five-blade, servo-controlled computerized saw, sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. It has 23 axes of automated movement, enhanced diagnostics, auto management reporting.

The SC cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [4] 18" and [1] 32" blades with air brakes, yellow outfeed skatewheel conveyors and pc, carriage and cabinet compressed air connections (for cooling & dust buildup prevention). Installed and operational. 480v/60Hz/3Ph power. Price: $89,990 :: FOB TX. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2004 Spida CXM Pull Arm Saw CXM4S60SS. Right-to-left lumber feed. "5.5 h.p. motor, 17.75" blade, cuts 180 deg quadrant, 8 deg to 171 deg, max thickness 6" max crosscut at 90 deg. 27.5", 45 deg max bevel cut", 20' infeed / 10' outfeed conveyors, spare blade. 240 volt, 3 phase electrical. $21,990, FOB: NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Alpine AutoMill SC Automated Component Saw (FOB AB) $99,000)

Inc $13,000 in Spare Parts Direct Link: http://goo.gl/xaXNAw

800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

MANUFACTURERS’

REPRESENTATIVES

NEW! New Monet DeRobo Linear Saw New, DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and open-stair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, left-to-right feed direction standard, lumber push and pull grippers for more accuracy, ink marking on the 1 1/2" face of the incoming boards and small piece capture and delivery to the front of the saw for easy access. Infeed deck and bunk feed are shown as options only. Works with the optional WoodRunner TM lumber retrieval system. 440 volt, 3phase. $165,000 Base Price, FOB MO.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

CUSTOM SOLUTIONS Â WITHIN REACH

Simpson Strong-Tie is on the job where you are with structural connectors and fasteners, truss plates and component design software. We’re providing you with innovative products and customizable tools to make it easier for you to design components and build structures while managing your business.

SSTM-ICS15_16x9_3-4.indd All Pages

Let us show you our new solutions designed around you, including our Component Solutions™ Director and Truss Studio software. Connect with us: (800) 999-5099 and strongtie.com/ics. www.strongtie.com/ics.

Š 2015 Simpson Strong-Tie Company Inc. ICS15-C

10/14/15 7:49 AM

Through thick or thin.

765-751-9990 A dverti$er

www.WoodTrussSystems.com Component Manufacturing

December 1st, 2015 #08197 Page #10

Don’t Forget!

You Saw it in the

Adverti$er

advertiser

Forum

It’s Good to be Back With Friends

_WTS_WOOD _TRUSS_AD_2.25X4.75_v2.indd

1 12/15/14

When I left Wisconsin for Oklahoma, I was looking forward to new surroundings.

Anna L. Stamm (If you can overlook the tornado risk, the Director of Communications weather is fantastic.) The hard part though and Marketing, was leaving an industry I’d called home for Component Manufacturing Advertiser. thirteen years. I missed going to work and 7:42 AM doing my best to provide as much service and support to my friends as you could accomplish in a day. So as I’ve adjusted to my new location, I’ve often wondered if there was a way I could continue to maintain those relationships . . . and now I have that opportunity.

I’ve joined The Advertiser because I’ve missed all of you! I’ve missed hearing from everyone. I’ve missed helping everyone. So now I’m working for you again, and we’re going to make sure The Advertiser keeps working for you, too.

What else would you like to see in The Advertiser?

Let me know! Give me a call (800-289-5627 x3) or send me an email (anna@componentadvertiser.org) with your feedback and requests. Our plans include:

2005 Alpine AutoMill SC Saw Five-blade, servo-controlled computerized saw, sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. It has 23 axes of automated movement, enhanced diagnostics, auto management reporting. The SC cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [4] 18" and [1] 32" blades with air brakes, yellow outfeed skatewheel conveyors and pc, carriage and cabinet compressed air connections (for cooling & dust buildup prevention).

Installed and operational. 480v/60Hz/3Ph power. Price: $89,990 Condition: Good Location: TX

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

•

Providing Articles – written by folks in the industry who are able to offer insight, expertise, and guidance;

•

Publicizing Announcements – including press releases, new product news, product updates, and other pertinent information from our contributors; and

•

Connecting Suppliers and Manufacturers – with advertisements on products, services, materials, sales, and anything else that should be included.

In the coming months, we’ll also start growing additional features, including industry news and an industry calendar.

An Open Forum for News & Updates So we can’t promise that you’ll agree with everything you read here.

We can’t promise that everyone will read everything that’s printed. But we can promise that we will do our best to provide an open forum for all of the news, updates, and advertisements that folks would like to share.

Welcome, Anna!

I would like to take this opportunity to personally welcome Anna Stamm back to the industry and congratulate her on the position at the Component Manufacturing Advertiser. I had the opportunity to work with Anna many years ago when I was a component manufacturer and Chapter President up in New England and again much more closely when I too worked for Qualtim and WTCA/SBCA. Anna, it is great to have you back and onboard with Thom and the CMA,and like many others, I look forward to working with you again.

Stan Sias Simpson Strong-Tie

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

SAWS

Don’t Forget!

You Saw it in the

Adverti$er

December 1st, 2015 #08197 Page #11

Todd Drummond Consulting LLC.

Increasing Net Profit While Sacrificing Labor Efficiencies?

www.todd-drummond.com Phone: 603-763-8857 todd@todd-drummond.com December, 2015 Copyright © 2015 Sometimes we lose focus of the main goal of creating more net profit for the company by focusing too much on one aspect of our business. Too often individuals focus too much on perceived labor efficiencies while limiting their overall capacities. Does reducing labor cost always produce more net profit?

Here are two prime examples where this may be something you should reconsider.

Todd Drummond Todd Drummond Consulting www.todd-drummond.com

How often do you hear or talk about labor to board footage or labor to piece count? Might it be that one can lose focus by giving all one’s attention to labor costs and forgetting about the big picture of actual margin dollars per given time period? When the schedule exceeds 4 or more weeks, during the peak periods of the build season, is it more important to achieve additional sales and increase the total margin dollars per day or is it more important to use the least amount of labor per unit?

Which of the cases below would benefit a company more when sales orders are not meeting the demands of all the potential customers?

Case 1.

Always focusing on cost per unit to maximize efficiencies? Example: A steady lower overall production rate limiting the labor cost per unit and therefore the total capacity.

Case 2.

Sacrificing labor cost per unit to gain additional gross margin dollars? (more sales). Example: Allowing labor costs per day to increase by adding additional personnel to increase capacity and yet the additional labor costs are always less than the gross margin dollars gained.

JobLine.com, inc.

The

800-289-JOBS

Time To Hire?

We’re here when you need help!

Truss Designers Tested & Guaranteed we have Wall Panel Designers too visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

In this example, there is a direct correlation between the loss labor efficiencies (35% GM @ 11% Labor Vs 33% GM @ 13% Labor) and the increased overall sales gains. Yet, it also translates to additional gross margin dollars. Now, I’m not necessarily advocating reducing your efficiencies for greater sales, but it is worth considering when you are losing sales and, therefore, losing gross margin dollars per time period. Sometimes there are net profits to be gained from sacrificing perceived labor efficiencies when you are gaining greater sales dollars (margin dollars) per time period.

There is currently a trend to apply the just-in-time lean principle of cutting using only linear saws to meet the demands of the build table(s), but many are doing this by sacrificing the maximum capacity of the build tables. The simple explanation for this type of production system is to sacrifice one station processing limit (cutting) while matching another (assembly) in order to maximize labor savings overall. However, in order to do this, you may have to limit the number of personnel per build table because the supporting stations, such as cutting, cannot ramp up capacity due to built in limitations. (In industrial engineering terms: theory of constraints and line-balancing practices).

An example of this folly would be trying to cut large quantities of common trusses such as AG trusses or even a large commercial project with large runs using only a linear saw. A five-blade component saw would easily outpace a linear saw for single-board-per-stock-piece runs of seven or more and would then be able to provide enough cut material for the larger build teams assembling the large run orders. These types of large runs, depending on their spans, normally allow for a greater number of personnel on each of the build tables in order to produce more trusses per shift. So why not design you production system for the best of both worlds? Why limit the capacity of cutting using only linear saws for all types of order processing? One should be able to maximize efficiencies and also ramp up capacity by adding personnel when sales call for it. One should always design the production systems with flexibility in mind.

One final point I wish to state is that, many times, adding additional personnel may actually drive down the labor-cost-to-sales-dollars ratio and also increase labor efficiencies per unit. It just depends on the conditions and needs of the tasks to be performed. One should always keep the end goal of increasing total gross margin in mind before rushing to conclusions about perceived labor efficiencies. It is not always as simple as reducing labor cost and, therefore, it will increase net profits.

STRICTLY CONFIDENTIAL! PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Infeed, dropsaw table, dropsaw not included

Top view 2.1ft

Simple Stop

3.9ft

2.8ft

Front view

Variable

Specifications Motor Stop system Travel Touch Screen Power Requirements

440w Brushless Motor 10, 16, 20ft 7 inch Color 110v 10Amp

Features

Options

Ideal for companies looking to automate the measuring of lengths Stop is accurate to within +/- 0.5mm ( 0.02 inch) Unit can display mm, Inches, Foot-Inches-Sixteenths, InchesSixteenths, Foot-Inches-thirtyseconds, or Inches-thirtyseconds Easy operation of stop with touch screen Simply enter the length required, the stop moves automatically to the correct length Easily fitted to any SPIDA saw to automate the measuring function Can be used for timber / aluminium / steel / fibreglass etc. (with appropriated saw) Cutting / drilling / punching / trenching measurement automation Save time and money. The SPIDA simple stop dramatically reduces the time spent measuring lengths and eliminates the waste associated with incorrect measuring

The Simple Stop can be built to a custom length to fit your plant requirements Can be fitted to most saws

For all Sales, Service and Inquires

Square 1 Design & Manufacture Inc. 400 N Forsythe Street, Franklin, IN 46131 T: 866-647-7771 Sales@SQ-1Design.com www.SQ-1Design.com

Page 12

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #13

Don’t Forget!

You Saw it in the

Adverti$er

TRUSS EQUIPMENT

Square 1

SQ-Series Floor Truss Machine (Table Guided) MiTek/Tee-Lok Gantry System MiTek/Tee-Lok 102’ working length, side-eject, gantry system includes (1) 2006 MiTek 24” diameter gantry head, (1) 1996 Tee-Lok 20” diameter gantry head, (1) TeeLok 20” diameter finish roller press, (13) wood-top Tee-Lok tables with skate-wheel ejectors, (11) idle rollers, (10) stand-alone receivers and rail. Includes all available hardware. 220 volt, 3 phase electrical. $48,990 FOB FL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW!

$86,162 FOB IN

800-382-0329 | www.wasserman-associates.com

n

e ic io r t P uc ed R

54' CMF Gantry Roller with Tables CMF gantry system consisting of (1) 24” CMF tracked gantry, (9) 5' 11" wood tables with plastic tops and ejectors, (1) 5' 11" wood tables with plastic tops and no ejectors, (23) 14' conveyor rollers, (3) 12' conveyor rollers, approx. 80 feet of rail and (15) truss receivers. Includes any available system jigging hardware, and all available spare parts if any.

Price: $38,990 :: FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1986 Mid-Atlantic (Tee-Lok) Tracked Gantry Mid-Atlantic 75 foot working length roof gantry featuring one (1) 18” diameter roller gantry (needs new pendant controls), twelve (12) 4’-8” x 13’-6” tables configured for soft top (plastic) with imbedded uni-strut jig rails. (plastic and underlayment removed).

Eight table ejectors need repairs. Includes rail, power masts, all available aisle plates and jigging. 480 volt, 3 phase electrical. $17,990 :: FOB NY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

• 24” Diameter x 3/4” Wall x 6’-6” Long Gantry Roller • 3 7/16” Diameter Continuous Shaft Supported by 3 Baffles • Dual 7.5 HP Sumitomo Cyclo 6000 Gear Motor • (4) Drive Wheels Run on Top of Table with (8) 3” Osborn Cam Followers Under Table • ”Soft Start” Inverter with Square 1 Easy ID Software • Flashing Motion Indicator Beacon Light • Front & Rear Emergency Shut Off Bar • Integral Mechanical Fail Safe Brake • 230/415/460/575 Volt - 3 Phase • 6’-6” Wide x 40’ Long Steel Table • 3/4” Steel Table Top • Clamping Rails & End Stops • Built-In 1/2” True Arc Camber to Both Clamping & Side Rails • Electrical Track & Air Cylinders are Under the Table • Build up to 40’ Floor Trusses with Option for Additional Length • Floor Truss Depths from 9” to 26” with Option for Additional Depth • Optional Pop-ups, Flip Jig (shown in photos) & End Eject (shown in photos)

Alpine RAM Easy Rider Tables 10 Each - Steel Tables with Slotted Tops & Liftouts. $3,000 per Table or $27,500 for all 10 Tables. FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

A

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Helps cut lumber even faster tHan it Helps cut costs.

Compatible with any linear-feed saw, the WoodRunner™ automated lumber retrieval system increases production by 30%, while reducing labor by half. WoodRunner sets the pace of the operator, and ensures accurate lumber selection every time. Visit www.apexmw.com or call 507-322-3700 to learn more today.

PHONE: 800-289-5627

006_WTS_wood_runner ad_7.123x3_v3.indd 1

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 12/15/14 5:38 PM

PLANT PRODUCTIVITY

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #14

Don’t Forget!

You Saw it in the

Adverti$er

Comprehensive Plant Audits Boost Production Efficiency

By Jack Van Cleave, Senior Manufacturing Consultant, Alpine

A

lpine recommends that truss manufacturers conduct regular, comprehensive plant efficiency reviews to improve productivity.

The goal of these audits is to increase board feet production rates and evaluate production effectiveness. Audits also help prioritize equipment replacement schedules to optimize investments. These audits can be performed by equipment suppliers or independent contractors.

There are many areas that can be examined in a manufacturing review, starting from when the order is received until the finished goods are shipped. What happens when your salesman receives the order? This is the point where the manufacturing process actually begins – not when the plant starts building the product. How do you schedule the ship date? Do you know how many orders can be completed in a day? What is the best way to cut, stack and stage an order? Do you track production so you know how much each jig can produce and can schedule it without overtime hours that reduce profits?

The days of building stock trusses for inventory are long gone. In most plants, the average run or setup is now 2.1 trusses. Years ago, we typically built 22 commons and two gables. While every plant is different, each is also alike in what it actually does. We are essentially in the material handling business, and the plant that touches a piece the least in the shortest amount of time is often the most productive one.

Comprehensive plant audits help customers maximize their productivity. Customers who have held reviews, followed the advice and implemented new procedures have shown remarkable efficiency improvements.

Customer Examples One customer was operating at 43 board feet per man-hour prior to performing a plant evaluation. After completing the evaluation and making changes in equipment and manufacturing processes, production increased to 63 board feet per man-hour after six months and 73 board feet per man-hour after 12 months. Enhanced productivity and efficiencies save money and go straight to your bottom line.

Another customer reported: As noted in the report, we do not track production by board feet. We track by sticks (a stick is any piece of lumber or steel, regardless of size). Following is a snapshot of the past 12 months – the first six are pre-audit, the second six are post-audit: 6-Month Period August 2012 through January 2013 February 2013 through July 2013 Beginning vs. Current Production January 2013 (month prior to audit): July 2013 (post-audit):

Average Sticks Per Man-Hour Wood: 14.83 Steel: 8.65 Wood: 19.15 Steel: 11.41 (+29 percent) (+31 percent) Average Sticks Per Man-Hour Wood: 13.77 Wood: 23.46 (+70 percent)

Making the Change Customers often know what they should do to enhance plant efficiencies, but need a reminder and assistance to get them started. Change is difficult, but now is the time to look at bad production habits that may have developed when business was slow and you were just trying to survive.

Review how you are doing things and where you can implement changes to increase your productivity. Start with small wins and your employees will buy into the process.

Then it becomes much easier to make additional changes. Good luck and continue to strive for improvement. Be sure to ask us how we can assist you. n Jack Van Cleave joined Alpine in 1992 and has extensive experience with component manufacturing equipment and plant layout. He is based in the Grand Prairie, Texas, office.

SAFETY TIP Never wear loose clothing, dangling jewelry or items with hanging strings, ties or belts around automated equipment.

Any of these items can get caught in rotating assemblies such as blades, belts or gears and throw you off balance before you can react. You may be pulled into the machine, leading to severe injury. For additional safety, stand comfortably with your feet far enough apart for good balance, and wear footwear with non-slip soles.

Source: Woodcraft Supply LLC (www.woodcraft.com)

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

INCREASE PRODUCTIVITY— UPDATE YOUR ALS 276.

Why Upgrade?

• Increase saw speed • Reduce truss costs • Cut truss by truss • Avoid downtime • Extend service life

The Alpine ALS 276 linear saw has been a longtime industry leader when it comes to productive cutting. Alpine offers a new upgrade kit that increases the saw speed, optimizes material use and works with Windows® 7.

Upgrade Now!

(800) 521-9790 | alpineitw.com alpineitw.com

Alpine part number 37124 The motion control upgrade package is available now and takes only one day to install when using a qualified electrician.

Contact your local Alpine representative or Carlos Lozano at (800) 786-5006, ext. 4263 or clozano@alpineitw.com to order the upgrade kit.

Page 15

Profile

Specifications

Features

Can Fit any Table Height Table Height Can Fit any Table Length Table Length 1.6in Puck Diameter 1 Pucks Per Rail No minimum or maximum rail spacing.

This is determined at time of order Setups no longer than 20 seconds. Most less than 10 seconds The system can support up to 120 rails controlled from the one workstation.

25amp, 110v, 1 phase for each 15 axis Power Requirements

Suits roller or platen stye presse Trusses can be rotated or flipped requirements.

Production reporting Software measurement tools to

14.7ft

Top view

2.6ft

Front view

24.0ft

Options

es ed to suit particular jigging

Auto Control of Truss Ejectors Steel Pucks Custom Heel and Apex Tooling

assist with quality control.

Sales | Service | Inquiries... sales@SQ-1Design.com www.SQ-1Design.com

866-647-7771

400 N. Forsythe Street Franklin, IN. 46131

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #18

Don’t Forget!

You Saw it in the

Wood Truss Systems

MANUFACTURERS’

Adverti$er

TRUSS EQUIPMENT

REPRESENTATIVES

NEW! Design your own custom roof truss gantry!

Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution.

Wood Truss Systems 765-751-9990

Alpine Speed Roll Model 47 Kick-Leg Floor Machine 1994 Alpine Speed Roll, Model 47, kick-leg floor machine. Serial number 14-12277-A. 40 feet overall length, 36 foot maximum length truss, builds floor-trusses from 10” inch to 24” inch truss depths. Includes one head with 18" diameter roll, two parking rail areas, and table with air cylinderclamp system. 480v, 3 phase power. (Plate rack shown is not available, vertical rack support stands are included). $8,400 :: FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Square 1 Short Roof Truss Finish Press Four-foot* wide x 3 1/2” tall throat. The unique “uni-body” construction creates a ridged machine that houses 12” diameter rolls, 7 1/2 HP motor with integrated brake, and 80# chain drive. This FRP features 114 FPM speed, emergency shut-off bars, and full chain and sprocket guards. Available options include: Other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls available at an additional charge. 208, 240, 480 volt electrical. $15,750 FOB IN

www.woodtrusssystems.com

765-751-9990

Autozen Automation

Truss Equipment

Alpine 34’ Floor Truss “Speed Roll” Gantry System Alpine 34’ Floor Truss “Speed Roll” Gantry System / 38’ Overhead Plate Rack / Air Clamping / Operated Indoors / Ready for Immediate Shipment. $15,500 FOB NH. Salter Associates 770-434-1006 www.salter.com

Service and Parts On Site Service and Repair

817-666-0880

• • • • •

Automills ALS 275, 276 and 286 SpeedCut Saws Manual Saws Automated/Manual Tables • Coast to Coast

• • • • • •

Maintenance Contracts Remote PC Support PC Repair Installations De-installations Servo Motor/Amplifier Rebuilding

www.AutozenAutomation.com PHONE: 800-289-5627

New Square 1 Floor Truss Finish Press New 2014 Square 1 floor truss finish roller press, four-foot* wide x 3 1/2” tall throat.

Use of this process speeds assembly and transports finish truss away from the production area, adds quality and peace of mind for your finished floor trusses. The unique “uni-body” construction creates a ridged machine that does a final press of the connector plates for complete embedment into lumber, saving wear on your floor assembly machine. 14” diameter rolls, 7 1/2 HP motor, 80# chain, 114 FPM speed, emergency shut-off bars, chain and sprocket guards, integrated brake. Available options include: *other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls at an additional charge. 208, 240, 480 volt electrical. $15,750 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

2007 MiTek Flat Stacker Model 70300-501 Automatic, two pedestal flat stacker with remote control. Stacks truss configurations up to 50’ on either side and is compatible with most existing conveyor systems. OEM system electrical panel controls included, steel frame truss stops, alignment stop posts, and hydraulic tank heater. OEM rated 35 second cycle time. (roller conveyors in photos are not included). 230/460v–3ph electrical.

Currently wired for 460 volt. $49,990, FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 NOW $19,900. FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

Wood Truss Systems

TRUSS EQUIPMENT

MANUFACTURERS’

1996 Alpine 14' x 100' Side Eject Roller Gantry System Alpine 14’ x 24” Diameter Roller Gantry (Track Mounted). 100’ of Walk-Thru Tables with Pop-up Skatewheel Conveyor. Drilled & Tapped Steel Top at Bottom Chord, Balance is LVL. AutoSet (air wrench) Jigging. Powered Exiting Conveyor with Receivers. Alpine 14’ x 24” Diameter Finish Roller. 10 Each - Outside Non-Powered Truss Rollers. Buyer to dismantle & load equipment. Seller to provide forklift. $40,000 FOB TN. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1986 Mid-Atlantic (Tee-Lok) Tracked Gantry Mid-Atlantic 75 foot working length roof gantry featuring one (1) 18” diameter roller gantry head with pendant controls, twelve (12) 4’-8” x 13’-6” tables configured for soft top (plastic) with imbedded uni-strut jig rails. (plastic and underlayment removed).

Eight table ejectors need repairs. Includes rail, power masts, all available aisle plates and jigging. 480 volt, 3 phase electrical.

Price: $17,990 :: FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Klaisler Receiver Arms (27) Klaisler Receiver Arms Date of Manufacture: 2005 & 2006 Excellent Condition Reduced - $550 @ any quantity FOB GA Salter Associates 770-434-1006 www.salter.com PHONE: 800-289-5627

December 1st, 2015 #08197 Page #19

1992 Clark Industries 14' Tri-Axis Press with Kick-Leg Table Model 4000 Gantry Press (14’) with Joystick Control, Ride Platform & Floor Track. 20 HP Hydraulic Pump Motor. 16” x 19” Pressing Platen. Kicklegs & End Stands for 12’ x 50’ Table. Combination Steel/Wood & Plastic Top with Jig Bars $28,000 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Mitek 14' x 100' Side Eject Roller Gantry System Mitek 14’ x 24” Diameter Roller Gantry (Track Mounted). 100’ of Walk-Thru Steel Top Tables with Pop-up Skatewheel Conveyor. Unistrut Jigging & Jig Hardware.

Powered Exiting Conveyor with Receivers.

Mitek 14’ x 24” Diameter Finish Roller.

Outside Conveyor with Peak-Up Truss Stacker. $69,000 NOW $65,500 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

REPRESENTATIVES

CMF Stealth End-Eject Tracked Gantry System End-eject CMF Stealth tracked gantry system with 14’ by 56 foot working length. System features (8) eight slotted steel top tables with ejectors, (1) one 24” Stealth diameter gantry head, (1) one Stealth 24" finish roller press with 14 foot throat and (13) idler rollers. Includes all available electrical and jigging hardware. 440 volt, 3 phase electrical.

Price: $79,900, NOW $76,890 Condition: Good, Location: QC.

Alpine RAM Tracked Gantry Equipment Alpine RAM gantry, 140’ working length consisting of (22) softtop (3/4” T&G plastic) tables. Includes (1) 1999 24” diameter Alpine gantry roller and (1) 1985 18" diameter Alpine gantry roller. Complete with rail/base-plate, end stops and any available jigging hardware.

This equipment can be split into lesser quantities, two missing liftouts, currently operational. 220 volt, 3 phase electrical. Price: $39,990, Condition: Good, Location: PA.

CMF Stealth End-Eject Trackless Floor Truss Gantry

1983 Jager Travelmatic Mini III Hydraulic Bridge Press Designed for smaller trusses the system is capable of handling 2”x4” and 4”x2” trusses with no adjustment, ideal for hips, jacks, and valley-sets. No finish press required, system consists of a 6’ x 40’ drilled & tapped steel table, table guided press head (trackless), with a 6’x12” press platten, riding operator platform and all available jig hardware. 575 volt, 3 phase electrical. Price: $13,890 :: FOB ON. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

CMF Stealth floor truss gantry, end-eject floor machine features a 24 inch diameter roll gantry head, table-top air cylinder actuated clamping, skate wheel table-top conveyors and ejectors. Builds trusses from 11" to 25" inch deep truss, up to 40 feet long.

Included a 16 feet long, custom-made, wall panel framing station with stud locators and roller conveyor ejection system. 440 volt, 3 phase electrical.

Price: $53,900, Condition: Good, Location: QC.

765-751-9990

www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

December 1 , 2015 WE DI DN’T #08197 Don’t Forget!

You Saw it in the Adverti$er Page J UST WEATH E R #20 TH E STOR M. st

anufacturing

W e helped

PART TH E CLOU DS. Matching you with the right wood component equipment. New or used.

Through thick or thin. www.WoodTrussSystems.com www.mitek-usa.com

765-751-9990

A

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

To uncover what’s possible,

n

abandon what’s comfortable!

005_WTS_WOOD _TRUSS_AD_2.25X4.75_v2.indd

ew

1 12/15/14

Fitzzgerald Group, LLC

7:42

“A blending of excellent services and products, with answers that work”©

WoodRunner Conveyors Inc. Viking Walls MaxCustomCutter Wizzard PDS Drop-In Channels Gorbel Crane Technology Just a few or our profit enhancing parts that can make you whole!

630 Southpointe Court - #200 Colorado Springs, CO. 80906 PHONE: 800-289-5627

719-528-5445 RFitzgerald@FitzGroup.com www.FitzGroup.com

Table Guided Gantry System

by Square 1 Manufacturing

New, table-guided (NO rail) gantry system by Square 1 Manufacturing, side-eject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. New 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 Manufacturing can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase.

Price: $(Based on required configuration) :: FOB IN.

Call for pricing (Based on configuration) 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #21

Don’t Forget!

You Saw it in the

Adverti$er

TRUSS EQUIPMENT

Maintenance Technicians Refurbished 1997 CMF Tracked Gantry System 1997 side eject CMF tracked gantry system with 14’ by 93 ft. working length. Tables and finish roller press were refurbished in 2007. System features (13) plastic topped tables with slotted-steel bottom chords, (1) 24” CMF diameter gantry head, (1) CMF 24" finish roller press, (4) idler rollers, and all available receivers. 440 volt, 3 phase electrical. $43,890 :: FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Pacific Automation Floor Gantry with Finish Roller & Stacker 2005 Pacific Automation 24” Diameter Floor Gantry (7 1/2 HP). Flat Park Section & Incline Ramp Park Section (for end eject).

40’ Table with Air Cylinder Clamping.

Maximum Truss Length: 36’. Floor Truss Depth: 11 1/2” to 26”. Side Electors in Jig #1, End Eject Rollers in Jig #2. 2005 Pacific Automation Floor Truss Finish Roller. 2007 Pacific Automation Floor Truss Stacker.

Stored outside under lumber tarps since 2011. $67,500 $62,500 FOB AB. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Clary Kick-Leg Floor Machine Clary "Roll-A-Span" kick-leg floor machine, recently reconditioned by seller.

50 feet overall length, 6 foot wide steel table with on-table air cylinder clamping.

This machine builds up to 33 foot length floor trusses from 11 7/8 inch to 25 inch truss depths. Features a roller gantry head with riding platform, two parking areas, mast with electrical cord system, and all available jigging hardware. 7.5 HP motor. 240v, 3 phase power. $11,890 NOW $9,990 FOB KY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

Technology has changed the aspect of truss and wall panel production over the last decade. The continued advancements in technology have also changed the dynamics required to support that equipment. Staffing requirements and staffing abilities vary by Component Manufacturer. In smaller companies, management often takes on the task of maintenance, while larger companies seek qualified technicians to support the array of equipment. We have seen a growing trend in organizations seeking to outsource the service of specialized equipment to qualified companies. Maintenance is no longer limited to mechanical & electrical repairs. Highly skilled maintenance crews must be fluent in mechanical and electrical services as well as electronics, software and information technology.

Let us consider each component of maintenance separately. First, the mechanical aspect: or how something works. The maintenance crew must have knowledge in the design, and mechanical operation of the machine, often including fluid power such as pneumatics and hydraulics. Second, the electrical & electronic characteristics of each machine vary greatly. The staff must be able to read electrical schematics, troubleshoot Alternating Current (AC) & Direct Current (DC) motors and components, Variable Frequency Drives and PLCs. Each component may contain custom programming, settings and firmware. Software is often overlooked as a responsibility of the maintenance crew. When a machine fails to operate mechanically as designed, it becomes the responsibility of the maintenance staff to quickly remedy the situation. The staff must be able to competently operate the software, for each machine, and understand the diagnostics center within each individual software package. Leading to Information Technology (IT) as the final aspect to the maintenance crew’s requirements. While companies may have IT staff or an individual that supports that roll; the maintenance crew will be a supportive player in this field. Software updates from Microsoft, virus protection, organizational software and equipment manufacturers will conflict from time to time. The first call traditionally goes to maintenance.

Square 1 Design & Manufacture Inc. employs engineers, electricians, mechanics, and IT technicians.

Continuous training for our staff for mechanical and electrical requirements is essential for the lines of equipment we support. Our staff continues extensive training in a variety of software packages including Spida Machinery Software as well as Mangotech Software. Not only are our specialists trained on equipment

by Square 1 Design, Klaisler, Spida Machinery and Mangotech, but inventory an array parts for each brand of equipment.

Our staff supports customers across North America on a weekly basis by providing scheduled preventative maintenance service calls on their time frame. Those customers are realizing greater up time with scheduled machinery downtime versus unscheduled downtime. We can typically service machinery in a single shift and remain on site the following day to provide additional training and production tips that have saved hours of production in a single week. Production staff often “work around” maintenance issue causing lower production rates that are never reported to management. We address those issues during our service calls.

Conversely, unscheduled downtime may force a machine to out of production for days or weeks, depending on the severity of the situation.

It’s management’s responsibility to efficiently staff the organization and remain profitable. Consider lowering labor costs and increasing productivity by outsourcing annual or biannual technical preventative maintenance contracts to qualified suppliers. Equipment manufacturers have peak and non peak seasons, travel all corners of North America, and look to fill unscheduled hours while their staff are in geographical areas.

Sean Hubbard Square 1 Design & Manufacture Inc. 400 N. Forsythe St Franklin, IN 46131 317-440-2804 866-647-7771 Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

www.todd-drummond.com

todd@todd-drummond.com

(603) 763-8857

TDC is Lean Six Sigma Certified √

Testimonials of Consultation Services at http://todd-drummond.com/todds-profile/

To: Whom it May Concern From: Dan West Re: Todd Drummond Consulting I have been intimately involved in every facet of the truss business. This gives me a unique ability to understand how different areas of the business should intertwine to get things done. I have been involved in creating and running top performing businesses for decades.

My aphorism: No matter how good you are, there is someone else doing it better! You need to constantly be on the lookout for the better option and adapt to make it your own. One of my goals has been to learn more about “lean manufacturing” and how I could adapt it to my operation. Of course, like all business owners, I have never had the time to do this. Enter Todd Drummond, I have known Todd for years and have watched as he slowly grew his consulting business into a major player in our industry. Todd has a luxury that very few people have. He has not only been in dozens of truss plants, he has had the opportunity to watch, listen and learn in every one of them. This is invaluable in itself and something a business owner would never have the time to do. The other side of the coin is, Todd has extensively studied Lean Manufacturing and been very progressive about understanding how best to implement lean principles in a component operation.

I hired Todd’s services in 2013. His process was all encompassing and included almost every aspect of the business. He did a great job covering every aspect of the process, while using lean principles as the foundation. I was pleased with everything. Todd went over best practices and lean principles related to our location. He gave us some great advice and input. One of the most powerful things was the power point presentation Todd left with us.

This is invaluable when trying to work with and train your people. When we are ready to upgrade a part of our business, we refer to the TDC presentation to help keep us on track and make sure we are always thinking lean!

Todd has watched and done time studies on almost every piece of equipment in our industry. To have that as a resource is worth the price of admission, in and of itself. When it comes to investing in new equipment, Todd’s suggestions have been very astute. His recommendations and suggestions have definitely made a positive impact on our company and our bottom line.

Whether you’re a successful business looking for more, a struggling business that needs some guidance, or a business somewhere in between, I highly recommend Todd Drummond Consulting LLC to help you along the way.

Sincerely,

Dan West - Owner & Managing Member - Snake River Truss & Components LLC

85+ Companies Completed 25+ Years in the Truss Industry 10+ Years in the Consultation Business Normal gains for most clients are 3 to 6 points in net profit!  Lean Principles Explained and Demonstrated  Tailored for the Component Industry and for Each Company  Proven and Practical Best Methods for Reducing Cost and Improving Net Profits  Includes Theory of Constraints, Opportunity Cost, and Better Pricing Methods  Approx. 18 Hours of Training Spread Over 4 days  All Departments Addressed - Manufacturing, Design, Sales, & Administration

(50% manufacturing - 50% is all other departments)

 Truss Manufacturing Time Standards

(R.E., S.U. & Man-Minutes)

 ~95 Different Time Elements to Choose for Differing Conditions for Both Roof and Floor Manufacturing  Proper Costing & Pricing. Scheduling, Production Efficiencies

 Effective Incentive Programs  Equipment  Before You Buy, Get Unbiased Advice - I do not receive any commission or get any type of referral fee from any of the

equipment or plate vendors. Warning: Equipment and plate salespeople are spreading discouraging remarks about my services. They are all worried about losing a potential sale, which has happened on more than one occasion. The best advocates are my previous consultations. See the many testimonials of my services on my profile page.  Linear Saw Time Study Spreadsheet – Eleven different types of linear saws and one generic automated component saw

for expected productivity

 Design Department  Management and Employee Issues All have given positive testimonials and recommendation of services…

Testimonials of Consultation Services at http://todd-drummond.com/todds-profile/

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #24

Don’t Forget!

You Saw it in the

Adverti$er

WALL PANEL EQUIPMENT

NEW! New Component Table with Skatewheel Conveyors

IBS 12' x 16' Squaring Table Only • Wall Panel Lengths up to 16’ • Powered Height Adjustment (3’-11” to 2’-3” wall heights) • Manual Squaring Stops • 110 Volt / 1 Phase • Excludes: Panel/Router Bridges, Plant Net Computer & Enclosure $9,400 FOB MO Wasserman & Associates 800-382-0329 www.wasserman-associates.com

• Lift & Extend Skatewheel Conveyors • 10’ x 10’ Work Area with Squaring Lip • Gun Holster & Nail Tray

$7,900 FOB NE 800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

MANUFACTURERS’

REPRESENTATIVES

2008 Hain 12' x 16' Framing Table • Wall Lengths up to 16’ • Powered Height Adjustment (8’ to 12’ wall heights) • Single Gun Tool Dollies (excludes nail guns) • Pop-up Skatewheel Conveyor • Ball Screw Telescoping System (Repeatable to .015”) • Retractable Plate Clamps • 110 Volt / 1 Phase • Includes 20’ of Roller/Skatewheel Conveyor $15,500 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2007 Panels Plus Combo Table 2007 Panels Plus 12’w X 16’ L, Combo Table builds interior and exterior walls in a compact area. System includes P+ sub-component lay-up table, P+ Router (frame), a Coffing 1/2 ton electric hoist, P+ panel lift, steel-frame lift station. The Combo table features a 24 tool (mounts), single-beam, multi tool bridge, with side-shift, tilt function, and auto-return.

Framer function supported by dual tooldollies with 3 tool mounts each, and stud locators @ 18" & 24" o.c. spacing (excludes fastener tools). The Combo Table is expandable by moving sheathing operations to another P+ OEM table. $79,800 FOB: AB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW!

DeWalt Panel Saw Vertical panel saw, 10 foot long, utilizes 13 amp 120v industrial saw motor, DeWalt circular saw with 8" blade, crosscuts material up to 64" wide and 1 1/2” thick.

Included PDF service manual. $2,100 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

New Panels Plus Wall Panel Framing Equipment

765-751-9990

Price: $41,450 Base Location: MN

PHONE: 800-289-5627

32' Framing Table Manually Adjusts to 8’, 9’ and 10’ Wall Heights. Air Storage and Couplers in Table Frame. 2 Tables Available (1 at $4,900 or Both for $9,300). $4,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

December 1st, 2015 #08197 Page #25

WALL PANEL EQUIPMENT

2005 Viking ADT Wall Panel Framer Price: $30,890 :: FOB MI Condition: Good Category: Wall Panel Description: Viking framing station with PreStage table.

Framing station model PS-1000, includes stud locators (16" & 24" centers), skate wheel ejectors, walk-through aisles, 1/2 HP motor and two powered tool carriages. From the OEM's literature: "Discharge speed of 12" per second. Once staged the framing sequence is event driven: tools fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity.

Builds walls from 4'-2" to 12'-0" high, in lengths up to 20' long." Sold new for $132,000. System support and installation available from the OEM. 480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Tools not included.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2015 Precision Equipment Roll-Off Trailers 40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System.

Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting.

Mesh Between All Rollers. Patented Load Lifts. LED Lighting System. Extenda-Rail. 4" x 35' Load Straps. Patented Strap Locks. Strap Winches. Dove Tail on Rear of Trailer. Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers.

Sliding Winch System. Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Panels Plus Wall Panel Framer Wall panel assembly equipment for wood or steel wall panels, floor-panels, and related framing components. The base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches. Design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality.

Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame.

Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages.

Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge.

Squaring stations, sub-component tables, conveyors and panel lifts are also available.

Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical.

From $40,200 base price FOB MN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 PortaFramer Mobile Framing Table •Wall Heights from 7’-9” to 10’-6” •Stud Locators at 16” Centers •12” White Spoke Wheels $7,650 FOB MO Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Wood Truss Systems

MANUFACTURERS’

Adverti$er

WALL PANEL EQUIPMENT

REPRESENTATIVES

2004 IBS Wall Panel System Intelligent Building Systems (IBS) Complete interior/exterior wall panel line with 6’-4” through 12’-3” wall height capacity. Wall assembly begins with (1) 10' x 10' sub-component lay-out table with skate-wheel lift-outs to Dual Skate-Wheel accumulation conveyor (20').

One (1) 16' long framing table with two-tool tool dollies and dual light bars, Dual accumulation roller conveyor (30') feeds to one (1) 16' long sheathing table with multi-tool/single beam nail bridge with stitchers and laser (no-tilt), Dual out-feed roller conveyor (20') ) Support Equipment includes IBS Handle-Bar style router frame, (1) 24" diameter up-cut saw with 16 ft. Tiger-Stop saw and dust collector, (4) IBS Plant Net terminal enclosures with stands and optical switch, (1) panel lift, and (1) Saw Trax panel saw. Also included (1) Dayton 1/2 ton swing-arm base with 500 lbs. electric hoist and IBS panel lift. 120v & 480 volt, 3 phase electrical, 120 PSI air required. (Photos from previous installation). Price: $69,900, Condition: Good, Location: AB.

2006 IBS Wall Panel System Intelligent Building Systems (IBS) interior or exterior wall panel production tables 6’-4” through 12’-3” wall height capacity. Includes (1) IBS sub-component nailing station, (1) sub-component lay-out table with skate-wheel lift-outs to (1) 16' long framing table with two-tool tool dollies and dual light bars, (1) 16' long squaring / sheathing table, (1) 16' long sheathing table with single-tool/single beam nail bridge with stitchers, (1) IBS hand-held router frame with Porter Cable router, (1) 24" diameter up-cut saw with 16’ Tiger-Stop and roller conveyor, a second 12' Tiger-Stop, (4) IBS Plant Net terminal enclosures with stands and optical switch, panel lift and all available roller and skate-wheel conveyors with stands and panel lift. 480 volt, 3 phase electrical. 120 PSI air. Price: $89,900, Condition: Good, Location: AB

765-751-9990

www.woodtrusssystems.com PHONE: 800-289-5627

December 1st, 2015 #08197 Page #26

Viking Framing Station Viking 38’ framing station with walk through design includes H.D. stud locators (16” & 24” centers), skate wheel ejectors, Powered tool carriages with three (3) tools per side, Auto-Plate Stops, and dual operator controls. Once staged the framing sequence is event driven, including 2x4 or 2x6 material size System allows assemblers to work from both the top and bottom chord for increased productivity. Builds walls from 4' to 12’-0” high. System support, and installation available from the OEM. 480 volt, 20 Amp, 3 phase electrical. 15 CFM air at 100 PSI. Price: $43,990 :: FOB OH Wood Truss Systems 765-751-9990

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders.

Stainless Steel Push-In Air Line Fittings.

Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

Carlson 9' x 16' Wall Panel Line •Framing Table with Stud Locators, Skatewheel Conveyor & Pneumatic Plate Clamping •Squaring Table with Router Bridge •Sheathing Table with 16 Tool Panel Bridge •Excludes Bostitch Nail Guns on Panel Bridge •Triad CN-4 Sub-Component Nailer $14,900 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

IBS 16’ Tilt Table •Adjustable Heights & Clamping to 12' •Skatewheel Conveyor •Hydraulic Pump & Cylinders •Remote Control Panel •Excludes Wall Panel Lift & Plant Net Computer with Enclosure in Photos $25,000 FOB Alberta Wasserman & Associates 800-382-0329 www.wassermanassociates.com

IBS 12’ x 16’ Exterior Wall Panel Line (Line #2) FRAMING TABLE Wall Panel Lengths up to 16' Powered Height Adjustment (3'-11" to 12'3" wall heights) Light Bar Auto Stops Tool Dollies (Excludes Nail Guns) Stud Locators at 16" & 24" O.C. Pop-up Skatewheel Conveyor SQUARING TABLE WITH MULTITOOL PANEL BRIDGE Wall Panel Lengths to 16' Powered Height Adjustment (3'-11" to 12'3" wall heights) Manual Squaring Stops Single Beam Panel Bridge (Excludes Nail or Staple Guns) Top & Bottom Plate Stitchers (Excludes Nail or Staple Guns) No Bridge Tilt or Auto Return ACCESSORY EQUIPMENT Four (4) IBS Plant Net Computers with Enclosures (No Stands) IBS Component Table with Auto Stops 60' Conveyor with Stands IBS Handle Bar Router (No Router Motor) Wall Panel Lift. $69,900 FOB AB Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M m ACdverti$er omponent

anufacturing anufaCturing

Don’t Forget!

You Saw it in the

Adverti$er

November December 1st, 2015 #08197 #08196 Page #28 #24

New Productivit Wall Panel Manufac PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M m ACdverti$er omponent

anufacturing anufaCturing

Don’t Forget!

You Saw it in the

• • • • • • • • • • • •

ty in cturing PHONE: 800-289-5627

November December 1st, 2015 #08197 #08196 Page #29 #25

Adverti$er

FEATURES One Tool System (Change from Staples to Nails in Minutes) Programmable Fastener Patterns wit PLC Touch Pad Entry Accommodates 2”x4” and 2”x6” Walls Straight Line Stitching Away and Towards You Bridge Tilt at Sheathing Seams to Eliminate “Shiners” Adjustable Bridge Speed for Accurate Alignment Auto Return to Park Section on Tool Bridge Laser Pointer for Identifying Fastener Placement Powered Height Adjustment (8’ to 12’ Wall Height) Pop-up Skate Conveyor Cantilever Table Which Allows Floor to be Free of Obstacles Optional Stud Locators

$67,500

Installation Support Available in the US & Canada

See More On-Line at

www.wasserman-associates.com Ph: 800-382-0329

Fax: 402-761-2422

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Toll Free 800-382-0329

www.wasserman-associates.com

WizardPDS®

drop-in Channels™ Old technology turned state-of-the-art with WizardPDS® drop-in Channels™ Your table + our technology = Zero Set up time and NO manual jigging.

Retro fit now - own it in 6 months!

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

TRUCKS & TRAILERS

Load Lifter T-40 Yard Carrier The T-40 Modular Yard Carrier can easily move a modular building off your production line to your staging area in minutes. 50,000 Lb Capacity. 70' Main Rail Length (78'-6" Overall Length). 20" Vertical Lift. 18 HP Gas Engine Power Unit for All Hydraulics.

Rear Lift: Six 5 x 20 Cylinders. Pintle Hitch Coupler. Running Gear: Six 20,000 Lb Heavy Duty Agricultural Spindles & Hubs FOB NE:: $19,500. NOW $18,900 Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1990 Ford F800 Truck with 1982 Barns Truss Trailer

•Low Mileage Unit in Good Condition FANTASTIC DEAL! $9,900 FOB CA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

December 1st, 2015 #08197 Page #31

2004 Hot Shot 43' Roll-Off Trailer Hydraulic Raised Roller Bed. GVWR: 24,000 Lbs. Tandem Axle. Tires: 23516. Electric Brakes. Headache Rack.

Manufactured by R & R Truck & Trailer (7-26-04). $9,500 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1999 Haulin 48' Roll-Off Trailer Leaf Suspension with Tandem Sliding Axle. Hydraulic Lift Neck. Air Pin Locks.

DOT is Current (March 2015). Air Brakes with ABS. Brakes are 50%. Tire Size: 25570R22.5. Tires are 6/32” to 14/32”. Hub Meter. Some of the cross members have rust holes. $13,900 FOB MN. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2000 Prentice Telestik-33 Material Handler 32’-10” Boom. 4,000 Lb Payload. Excludes Truck. $10,000 FOB GA. NOW $8,000 Wasserman & Associates 800-382-0329

MISC.

2010 USIFAB Roof Truss Vertical/Flat Stacker Price: $63,980 :: FOB QC Condition: Good Category: Material Handling Description: 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Cullen Model A40-2 Generator Set Detroit 12V-92 Engine.Capacity: 400 KW Capacity.Output: 120/208 Volt - 1388 Amps - 3 Phase..Control Panel..Skid Mounted..1,200 Hours. 30,000 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2009 EnDiSys / Graco Foam Insulation System EnDiSys Model 3004240B. Skid Mounted Graco Reactor H-25 Hydraulic, Heated, Plural Component Proportioner. Maximum Flow Rate: 22 Lb/Min. Maximum Fluid Working Pressure: 2,000 PSI. Reactor Portable Dispense System (Manual Contol).

230 Volt / 3 Phase. Two 100 Gallon Heated Tanks. Drum Agitators (Both Sides). Feed Pumps. Recirculation System for Hose and Reactor. 150’ Heated Hose with 10’ Whip.

Out of Service (Stored Inside). $19,500 Now $17,000 FOB NE Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt).

•Pressure Pump & Vessel. •Lightly Used.

•Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

www.mitek-usa.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Hurry and Wait!

December 1st, 2015 #08197 Page #32

Don’t Forget!

You Saw it in the

Adverti$er MISC.

By Rod Wasserman - Wasserman & Associates December, 2015

Thank you to all who viewed our Framing Table with Single Tool Programmable Panel Bridge at the BCMC Show in Milwaukee! Many have asked why should I consider a Single Table Wall Assembly System with Single Tool Panel Bridge?

Over 40 years ago Triad introduced the Exterior Wall Panel Line consisting of Framing, Router and Sheathing Stations with Accumulation Conveyors before and after each station. In the decades following, the competition has copied the Traid example of the long wall panel production line.

Wall panel production is not like the Ford or GM Assembly Line with a set time allotment to each task. Wall panels are custom assemblies with a wide variance in assembly times. The wall panel machinery manufacturers acknowledge this by designing accumulation or extensive material handling into the production line (to reduce hurry and wait!) resulting in large facilities for wall panel production.

The advantage of the Single Table Wall Assembly System is three fold. Since all of the work is completed at a single location, no accumulation conveyor is required resulting in a much smaller footprint required for wall panel production. Also, without the accumulation conveyor, the time lost for material handling (releasing, transporting and resetting the wall panel) is recaptured. And finally, because all the work is completed by one 2 person crew in a single location, you have zero lost time by elimination of unbalanced cycle times over multiple locations (no hurry and wait!). The end result is a higher LF/Man/Hour output requiring less production space.

The "old school" Multi-Tool Panel Bridge allows one gun selection mounted at 6" centers (optional 3" centers with bridge shift). If your project requires a different fastener, you need to "change out" 24 guns (hurry and wait!). Also, if a gun or guns run out of fasteners or malfunction, your crew will hopefully locate the missing fasteners before shipping the completed panel (more hurry and wait!). If the project requires fastener spacing other the 3" or 6" centers, the panel will require manual nailing or stapling with inconsistent results.

The Single Tool Panel Bridge has programmable fastener spacing.

The single gun can be replaced in under one minute and the magazine fastener load can be easily managed. The Panel Bridge also has a gun tilt function to eliminate "shiners" at sheathing seams.

Don't wait, please contact us today for additional information or to schedule a plant tour and we will hurry to process your order so that your can benefit from the productive advantages of a Single Table Wall Assembly System with Single Tool Panel Bridge.

Rand Chord Splicer

Rand Roll-Splicer, splices 2"x3", 2"x4", and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Imbeds plate lengths up to 19 inches. Features heavyduty tubular frame, dual-recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points and a 3 HP motor. Footprint of 59" long x 42" wide. Includes 10' infeed and 20' outfeed conveyor, 440 volt, 3 phase electrical. Price: $10,490, Condition: Good, Location: QC

UsiFab Chord Splicer

UsiFab chord splicer splices 2"x3" through 2"x6" lumber.

Presses the lumber together prior to imbedding plates. Imbeds plate lengths up to 13 inches. Features heavy-duty tubular frame, dualrecessed, simultaneous-activation buttons, guarded motor, sprockets and a 3 HP motor. 600 volt, 3 phase electrical. Price: $8,990, Condition: Good, Location: QC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Tell Them You Saw it in the M ACdverti$er omponent

anufacturing

Serving the Structural Building Components Industry

Cullen Model A40-2 Generator Set Detroit 12V-92 Engine.Capacity: 400 KW Capacity.Output: 120/208 Volt - 1388 Amps - 3 Phase..Control Panel..Skid Mounted..1,200 Hours. 30,000 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

www.mitek-usa.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

2008 OMGA Finger Jointing Line Price: $29,900 NOW $24,900:: FOB CO Model FJL100M, refurbished by Monet in 2010. This complete system includes OMGA JL 100M finger joint cutting head, shaper unit, OMGA PR 100/3.2 hydraulic press, OMGA INK F-100 glue station, and TITEN finish planer of unknown age, used for producing finger joint stud material from cut off scrap material. 480v, 3Ph power.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2010 USIFAB Roof Truss Vertical/Flat Stacker Price: $63,980 :: FOB QC Condition: Good Category: Material Handling Description: 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt).

•Pressure Pump & Vessel. •Lightly Used.

•Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Don’t Forget!

You Saw it in the

Adverti$er

December 1st, 2015 #08197 Page #33

MISC.

2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 NOW $52,500 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Hain 20' Powered Measuring System •Adapts to Any Saw •Left or Right Hand Operation •Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers) •Motor: 1/4 HP Linear Actuator (110 Volt) •Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion •Stops: Jig Bored Steel •Stop Blocks: Machine Billet Aluminum •Optional Lengths from 5’ to 60’ •Optional Gang Stop •Add $770.00 per 10’ Section of Heavt Duty Roller Conveyor with Stands Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Model TS12 TigerStop Software Version 4.20. Automatic positioning of stop via simple and intuitive controls. (10) Pre-Programmed “Go Sets” or enter individual sizes. Programmable Controller can store up to 99 programs.

Programmable Increment Function.

Excludes Saw & Roller Conveyor. $3,500 FOB AB. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Invicta DGI-40 16" Single Surface Planer (Used) •15 3/4” x 8 1/2” Capacity •25 & 46 FPM Feed Speeds •5,000 RPM Cutterhead Speed •7 1/2 HP Motor •230 Volt / 3 Phase •Powered Raise & Lower of Table $4,000 FOB WA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

New Square 1 Rolsplicer New 2014 Square 1 Rolsplicer splices 2"x3", 2"x4" and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 240 or 480 volt electrical. $15,500. FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Panels Plus Sub-Component Nailer Remote Clamping & Nailing (Foot Pedal Control). Maximum Clamp Opening: 17” x 17 1/2”. On/Off Switches and Tac Valves (detects lumber for safety) for each nail gun. Pop-up Squaring Stop. Four Duo-Fast Nail Guns. 5’ Infeed & 5’ Outfeed Roller Conveyor. Electrical: 120 Volt / 1 Phase.

Air: 20 CFM at 90 PSI. Low Hours. $9,000 FOB PA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

New SL Laser Projection System New, laser projection system from SL Laser.

Projects roof truss, floor truss and wall panel design images accurately onto building surface, for faster setup and fabrication times. Each laser head provides 21' projection length (@15 foot ceiling heights).

Includes system computer, cables, mounting hardware for attachment to customer's structure, factory installation, training and choice of green or red laser. Works with each connector plate manufacturer's design software. Modular nature of the laser heads allows for easy, future expansion of system length. 120 volt, 1 phase. FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Four Arm Infeed Deck Price: $7,890 :: FOB PA Condition: Fair+ Description: Sullair ES-8 10' long x 10' wide 4-arm infeed deck, Screw Air Compressor/Tank/Dryer powered by a 1 HP motor, prism chain feed and deflector pans. 230/460 volt, 3 phase. Sullair 20 HP model ES-8 screw type air compressor with Large 200 PSI tank and Wood Truss Systems Sullair SR-175 air dryer. $8,890 FOB OH. 765-751-9990 Wood Truss Systems www.woodtrusssystems.com 765-751-9990 www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #34

Don’t Forget!

You Saw it in the

Adverti$er MISC.

NEW!

2011 Todd Saw Notch & Drill System

$75,500 FOB CO. 800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

MANUFACTURERS’

Spanco Freestanding Bridge Crane Equipment Details •Capacity: 4,000 Lbs •Runway Length: 33’ •Bridge Length: 20’ •Trolley Clevis Height: 12’ •Overall Height: 15’-6” •Add $2,500 for Harrington NER 1/2 Ton Hoist & IBS Wall Panel Lift •Add $25,000 for IBS Tilt Table $10,000 FOB AB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge.

Wired for 230 volt, 3 phase and 30 amp electrical service. $22,677, FOB FL | AS NEW. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

A

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

REPRESENTATIVES Door & Stair

2007 Univeyor Automated Linear Conveyor System $88,990 NOW $79,990:: FOB BC More information: http://goo.gl/7ZB2LE 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

B.A.M. CNC Stair Router System Builders Automation Machinery model CNC/MFSR, 4-axis SERVO stair router.

Norfield Magnum Produces contemporary, box and open Door & Jamb Machine stairs. The only machine available that also •Door Sizing/Beveling cuts the top and bottom landings. Fully •Lock & Latch Drilling programmable via system touchscreen •Hinge Butt Routing in the Door & Jamb w/large library already stored in the machine •Faceplate Routing up to 1 1/8” x 2 3/4” for almost all box and open stringers. This •Air Predrill & Air Screwdriver is a complete system with stair-clamp, Weg •Width: Doors to 4-0, Jambs to 10 1/2” Saw and optional Vacuum dust collector.

•Height: Doors to 8-0, Jambs to 8-0 Two high-frequency, 5 H.P., 24,000 RPM •Thickness: Doors to 1 3/4”, Jambs to 1 1/8” fan-cooled spindles horsepower, Installation •Butt Sizes to 5” x 5” and support OEM available at an additional •Butt Spacing: Infinitely Variable charge. 230v, 70 amp, 3 ph., electrical •Lock Backsets from 2 3/8” to 5” requirements and 110 p.s.i. @ 15 CFM air •230 Volt / 3 Phase requirements. One owner, purchased new $8,000 FOB WA and installed by OEM. $40,890 :: FOB OH Wasserman & Associates Wood Truss Systems 800-382-0329 765-751-9990 www.wasserman-associates.com www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

December 1st, 2015 #08197 Page #35

Door & Stair

NEW! 2003 Triad Smart Stair Router System CNC (computer numeric controls), menudriven machine cuts 2x10 & 2x12 standard stair profiles w/touch screen controls. Two HD routers cut top or bottom stringer only, or both stringers simultaneously. Smart Stair Router accommodates standard stair profiles, no riser profiles, split stringers & open stringers with hardwood or softwood settings; cuts top or bottom stringers or both simultaneously. Features (2) HD 2 HP belt driven routers w/1/2" capacity collets, (2) stepper linear actuators for cutting profiles, (1) servo/stepper drive wheel for indexing, 628 lb. vertical clamp, 352 lb. horizontal clamp, industrial computer, and 4-axis motion controller.

System includes 2260 Wedge & Glue Block Cutter to mix stacks of 1x and 2x materials in the same hopper.

Cuts (2) wedges out of 1x material and (1) wedge out of 2x material w/walkaway hands-free operation. Capable of cutting glue blocks; bag-style dust-vacuum system included. Includes Triad stair assembly clamp for easy jigging of staircase assemblies. Accomodates up to 16 risers with a maximum width of 50".

Price: $52,750 $47,750 NOW $32,750 FOB PA Wood Truss Systems 765-751-9990

BAM CNC Stair Router Saw Reman 03/08. Builders Automation Machinery [BAM] model CNC/MFSR stair router. Contemporary, box & open stairs, the only machine available that also cuts the top and bottom landings. Programmable with a large library already in the machine for most all box and open stringers. Remanufactured includes new wiring, rebuilt spindle motors, new drives & is equipped with two variable frequency drive, 5 horsepower, 3 phase motors. One year warranty. Setup is free of labor charges we do charge airfare and per diem for setup and training. Portable 4 bag, 3 phase vacuum switched on at the machine controls is available for $1,568. Installation by the OEM available at an additional charge. 230 volt, 3 phase, 60 amp electrical requirements and 120 p.s.i. and 35 CFM air requirements. Price: $56,667 :: FOB FL Wood Truss Systems 765-751-9990 PHONE: 800-289-5627

2002 Builders Automation Template Stair Router Model RUWO 2000 MFSR. Cut Box and Open Stringers. Manual Setup with Auto Feed and Cut. One or Two Stringers per Cycle. 10’ Infeed and 10’ Outfeed Roller.

Conveyor with Stands. 2 Bag Dust Collector.

(2) Lift Tables for Staircase Assembly. 240 Volt / 3 Phase. $25,600 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Builders Automation Stair Stringer Router

Watch video here: http://goo.gl/gSRwjd More information here: http://goo.gl/mSsxyY 800-382-0329 | www.wasserman-associates.com

JobLine.com, inc.

The

800-289-JOBS

RUVO Model 925 Door Machining Center Interior & Exterior Door Machine will automatically: bore for the main lock hole. bore for the latch hole. rout for the rectangular latch plate. bore for the strike hole. rout for the rectangular strike plate. mortise for two or three hinges in both door & hinge jamb. Specifications: Door Height: 6’-6” to 8’-0”. Door Width: 1’-4” to 4’-0”.

Door Thickness: 1 3/8” or 1 3/4”. Butt Sizes: 3 1/2”, 4” or 4 1/2”. Jamb Width: 2 1/2” or 10 1/2”.

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Tell Them You Saw it in the

A

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com

STRICTLY CONFIDENTIAL!

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er Parts house

Sell your Stuff

Including truss industry equipment parts and machinery that is “For Parts Only” Submit your ads with one photo, not to exceed 750k to: twm@componentadvertiser.org or Call: 800-289-5627 x 1 Standard Classified Rates Apply

December 1st, 2015 #08197 Page #36 Plate Exchange

Sell your Excess Plate Inventory and Hardware Including truss plates, wall panel plates, hangers, and hardware Submit your ads with one photo, not to exceed 750k to: twm@componentadvertiser.org or Call: 800-289-5627 x 1 Standard Classified Rates Apply

NEWS RELEASE For additional information, contact: John Mandel (224) 358-9449 jmandel@alpineitw.com

ALPINE INTRODUCES NEW STRUCTURAL CONNECTORS CATALOG VERNON HILLS, Ill., October 30, 2015 – Alpine, a leading provider of building component software, metal connector products and equipment for component manufacturers, has introduced its new 2015/2016 Structural Connectors catalog covering the company’s comprehensive construction hardware product line.

The 130-page catalog lists more than 2,000 different construction hardware products with clearly detailed information, specifications, diagrams and installation instructions. It includes the complete line of Alpine truss hardware, joist hangers, straps, braces and other products covering a wide range of structural applications. Products are organized both alphabetically and by category so users can quickly and easily reference them while planning wood construction projects. The catalog also includes references to all applicable code listings and evaluation reports, nail specifications, and other useful notes and charts that installers and designers will find beneficial.

“We completely redesigned the catalog for maximum ease of use based on input and feedback from customers,” said William Henderson, Alpine product specialist – Construction Hardware. “It should be an invaluable resource in specifying and ordering our construction hardware products.”

To download the new Structural Connectors catalog, visit the Construction Hardware page of the Alpine website at www.alpineitw. com. Copies of the catalog are available from Alpine Customer Service by calling (800) 521-9790.

Recognized for its engineering excellence, productivity-enhancing software and equipment solutions, and the industry’s best service, Alpine is a leading provider of building component software, metal connector products and equipment to component manufacturers. Since 1966, the company has partnered closely with customers to enhance their business and productivity. Alpine is also a leader in delivering software solutions that increase homebuilder productivity and profitability. The company is a division of Illinois Tool Works Inc., a Fortune 200 global diversified manufacturer with $14.5 billion in revenue in 2014. For additional information, visit www.alpineitw.com.

PHONE: 800-289-5627

Used Bimba 314-DXP Air Cylinder (9 Available) $20 Each (Nebraska) Wasserman & Associates 800-382-0329 www.wasserman-associates.com Alpine AutoMill RS Component Saw Parts (5) Encoder Drive Belts (2) Encoder Drive Gears (1) Drive Circuit (3) Hold Down Drive Rod Couplers (4) 3/4" Encoder Couplers (5) Carriage Track Scrubbers (1) Encoder Data Cable (1) P.C. Data Cable (3) 1 1/2" Plastic Slider Bushings (1) 1 1/4" Gear Encoder Coupler (5) Encoders (2) Motor Brake Caliper & Disk Sets Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 Auto-Omni 5 Blade Automated Component Saw (For Parts or Repair) $12,900 (Alabama) Wasserman & Associates 800-382-0329 www.wasserman-associates.com

(2) Used Triad Stud Locators mounted to (1) Bracket (30 Available) $45 Each (Nebraska) Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

Does Your Truss Plant Have Thousands of Dollars in Off-Line Obsolete and Unused Equipment and Parts?

Do you have excess Plate Inventory?

Sell It! in the Advertiser Call 800-289-5627

FAX: 800-524-4982

FASTENERS SIMPLIFY WIND-UPLIFT RESTRAINT Door & Stair

Building homes and structures with a continuous load path in regions of the country susceptible to high winds can now be accomplished from inside the structure with easy-to-install fasteners.

Strong-Drive® SDWC Screws Truss/Rafter-toPlate Connection and Stud-to-Plate Connection

Tried-and-true metal connectors, fasteners and anchors are traditionally used as a system to connect the roof, floors and foundation together. But now there’s another choice. Simpson Strong-Tie offers two structural fasteners designed for wind-uplift restraint: the Strong-Drive® SDWF Floor-to-Floor screw and the Strong-Drive® SDWC Truss screw.

There are several key benefits to using structural fasteners for continuous load path connections, including: • • • • •

Fast installations (significantly fastener than traditional methods) No predrilling No interference with finish materials Floor-to-floor framing alignment is not critical Ease of installation: The SDWC and SDWF install from inside the structure, eliminating exterior work on upper stories

Wind-Uplift Restraint

For illustrative purposes only.

See installation specifications.

The Strong-Drive SDWC Truss screw provides a stud-to-bottom-plate or stud-to-top-plate connection and can be used to fasten trusses and rafters to top plates. It is designed to simplify continuous load path connections at the roof and foundation. The SDWC is available in a kit that includes 500 screws, two driver bits and two metal installation guides. The SDWC screw is code compliant (IAPMO-UES ER-262) and is for interior use only.

The Strong Drive SDWF Floor-to-Floor screw attaches upper and lower walls together from the top, spanning the floor system to create a strong connection between floors. When used with the TUW take-up washer, the SDWF screw simplifies the floor-to-floor winduplift restraint connection.

The patented TUW take-up washer plays a key role in the long-term performance of the SDWF Floor-to-Floor screw when installed between the screw and the sole plate of the upper floor. As the structure settles because of shrinkage and construction loading, the threaded portion under the head of the screw ratchets up through the tabs of the TUW. The interlock between the tabs of the take-up washer and the threads under the head of the SDWF screw prevents the screw from sliding back under load. This provides a simple yet reliable means of shrinkage compensation for up to 3 ⁄4" per story. The SDWF screw is code compliant (ICC-ES ESR-3046), as is the TUW take-up washer (ICC-ES ESR-2320) – both are for interior use only.

When used together as a system with anchor bolts at the foundation, the SDWC and SDWF screws are a reliable, safe and economical solution for creating a continuous load path and resisting wind uplift.

To learn more, call (800) 999-5099 and visit strongtie.com/sdwc.

Strong-Drive® SDWF Screw with TUW Take-Up Washer Sill Anchor and Bearing Plate Strong-Drive® SDWC Screws Stud-to-Plate Connection

“When used with the TUW take-up washer, the SDWF screw simplifies the floor-to-floor wind-uplift restraint connection.”

© 2015 Simpson Strong-Tie Company Inc. SDWCSDWF15

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

December 1st, 2015 #08197 Page #38

WHAT IS "LUMBER MARKET BLUEPRINT"?

30-60-90 Day Softwood Framing Lumber Forecast With Buying & Bidding Strategies

Evaluation; Forecast; Strategy

Mastering the lumber market requires "a 3-­‐part plan"...

•evaluate the current conditions •anticipate price movements with a forecast •participate with the appropriate buying and bidding strategies.

Lumber Market BLUEPRINT is the monthly publication of Layman's Lumber Guide Forecasting Suite that provides a 30-­‐60-­‐& 90 day forecast with buying and bidding strategies to...

... best Manage Inventory Turns...having more or less lumber at the appropriate time. ...correctly Bid Future Jobs...protecting proRits in rising lumber markets and securing jobs in falling markets.

LUMBER MARKET BLUEPRINT combines statistical analyses and fundamental inRluences including...

•weather, •seasonal housing demand, •lumber dealer inventory accumulation and liquidation cycles, •lumber mill production interruptions and accelerations, •historical price relationships, •jobsite productivity, •lumber buyer intentions, •and the ever-­‐changing inventory shifts between lumber producers and lumber buyers.

All these components work together to create the unique Forecasted Decision Points, the same analytics used by Layman's Lumber Guide, LUMBER MARKET INTELLIGENCE for over 30 years. FDP's project "WHEN" lumber and OSB prices will most likely rise and fall...with 86% accuracy.

LUMBER MARKET BLUEPRINT illustrates this graphic forecast, along with speciRic 30-­‐60-­‐90 day buying and bidding strategies, that reduce and eliminate costly buying and bidding mistakes, create more proRitable inventory turns to beneRit from lumber price volatility when planning for the future.

LUMBER MARKET BLUEPRINT identiRies what strategies are best executed...and when. !

Looking Forward,!

Matt Layman!

Publisher Lumber Market Blueprint...Matt Layman, Publisher 145 N. Main St., Cramerton, NC 28032 Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org Reprint or distribution is unlawful without permission. www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #39

Don’t Forget!

You Saw it in the

Adverti$er

Published by Layman's Lumber Guide Forecasting Suite

DECEMBER 2015 LUMBER MARKET BLUEPRINT 30-60-90 Day Softwood Framing Lumber Forecast With Buying & Bidding Strategies

December 01, 2015

Evaluation

30-Day Strategy-December

60-Day Strategy-January

90-Day Strategy-February

November was a funky weather month. The east =ielded above average rainfall, the western mountains got some snow, even though most temperatures were above average over the entire nation. There are pockets of pent up demand, like northern TX and Oklahoma, although on the whole, dealers and distributors are beginning December with less inventory than a month ago.

The pipeline is lean and production for this month will be about 25% off the annual monthly pace.

December historically transitions from the bull market correction into a resumption and acceleration of the bull market. We expect lumber and OSB to become less available as year end approaches and prices to =irm.

30-­‐Day Buys: Shift to early week purchasing the second week of the month and maintain that strategy into the =irst week of January.

30-­‐Day Bids: Quote 30-­‐ day jobs with a 5% adder expecting a $20 cost increase by month-­‐end.

Early January should continue higher with just-­‐ in-­‐time and just-­‐past-­‐time buyers fueling the =ire.

The latter half of the month should weaken while buyers digest purchases and manage winter weather.

60-­‐Day Buys: January needs would best be covered now, as cash and space permits.

60-­‐Day Bids: January job quotes should carry an additional 5% price increase over today's prices as inventory costs will be higher.

After a January month-­‐ end correction, February should =ind a strong spring preparation rally. Dealers and distributors will make preemptive inventory accumulations weeks before production is fully regained.

•90-­‐Day Buys: February needs would also be best covered in early December if possible. Otherwise, buy early in the week to minimize price increases.

•90-­‐Day Bids: Beware of extending winter bids at current prices. Add 10-­‐15% for February job deliveries.

Lumber Market Forecasted Decision Points - FDP's - (Red) [Time, Not Price] Reversal Weeks Are 86% Accurate +/- 1 week.

2x4 #2 Lumber Composite Price: SYP-E, SPF-W, Dry Hem Fir, Green Doug Fir. SPOT PRiCE (Blue).

450 425 400 375 350 325 300 275

Lbr Composite 2013-­‐current Dec

Jan

12

16

20

24

28

32

36

40

44

48

Lumber

8

Blueprint Expectations

Feb

52

4

8

7/16 Oriented Strand Board (OSB) SPOT PRICE. (Blue).

350 330 310 290 270 250 230 210 190 170 150

7/16 OSB SE 2013-­‐current Dec

8

12

16

20

24

28

32

36

40

44

48

52

Jan

Feb

4

8

Dec Jan Feb 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% -­‐ 0 -­‐ -­‐10% -­‐20% -­‐30% -­‐40% -­‐50% -­‐60% -­‐70% -­‐80% -­‐90% -­‐100%

OSB Market Forecasted Decision Points - FDP's - (Red) [Time, Not Price] Reversal Weeks Are 86% Accurate +/- 1 week.

7/16 OSB FDP 2013-­‐'16 Forecast

OSB

Dec Jan Feb

2

Lbr Composite FDP 2013-­‐'16 Forecast

Bullish Sentiment of Direction; For Each Month; Not Price.

LUMBER MARKET BLUEPRINT...Matt Layman, Publisher Phone or Text: 336-516-6684 Email: matt@laymansguide.org Reprint or distribution is unlawful without permission. www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

December 1st, 2015 #08197 Page #40

Published by Layman's Lumber Guide Forecasting Suite

LUMBER MARKET BLUEPRINT

30-60-90 Day Softwood Framing Lumber Forecast With Buying & Bidding Strategies

New Subscribers Wishing To Con3nue Receiving LUMBER MARKET BLUEPRINT (Including Wednesday's Lumber Market HOTWASH)

Complete & Return This SUBSCRIPTION REQUEST

MATT@LAYMANSGUIDE.ORG

_____ $27 MONTH TO MONTH, CANCEL ANY TIME [CHARGE OR DEBIT CARD ONLY; VISA, MC, AMEX]

_____ $247 ANNUAL PAID IN FULL-­‐ AUTO RENEWAL-­‐ [CHARGE OR DEBIT CARD ONLY]

_____ $297 ANNUAL PAID IN FULL-­‐ NOT AUTO RENEWAL [CHECK OR CARD]

COMPANY NAME:__

CONTACT NAME:__

PHONE:__

BILLING ADDRESS:___

CITY:__ ST.__ ZIP__

CHARGE CARD #__

EXPIRATION DATE __

AUTHORIZED SIGNATURE __

EMAIL ADDRESS __

Remit to Layman's Lumber Guide PO Box 905 Belmont2, NC 28012

LUMBER MARKET BLUEPRINT...Matt Layman, Publisher Phone or Text: 336-516-6684 Email: matt@laymansguide.org Reprint or distribution is unlawful without permission. www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

FOR IMMEDIATE RELEASE November 5, 2015

Adverti$er

December 1st, 2015 #08197 Page #41

For More Information and Photography: Shelby Lentz slentz@strongtie.com 925-560-9068

Simpson Strong-Tie and Calculated Structured Designs Form Strategic Alliance Pleasanton, Calif. – Simpson Strong-Tie and Calculated Structured Designs (CSD) have agreed on a strategic alliance to provide customers with a Simpson Strong-Tie branded version of the iStruct™ EWP software.

“Our current EWP software customers will have the option to migrate to this new platform that will provide enhanced 3D modeling, precision loading and flexible output,” said Mike Bugbee, SVP and General Manager of Integrated Components Systems for Simpson Strong-Tie. Plans are underway to incorporate elements of the current Simpson Strong-Tie EWP software into the new iStruct™ program and to leverage CSD’s software to enhance other Simpson Strong-Tie programs, including Component Solutions™ Director and Truss Studio.

Simpson Strong-Tie will continue to support customers using its legacy EWP software until they can transition to the new iStruct™ platform. Current CSD clients and users will not be impacted by the new software, and CSD will continue to offer their complete line of EWP software.

“We are excited to collaborate with CSD to jointly develop new software solutions for light-frame building while continuing to provide customers with our engineering knowledge and trusted level of service. CSD and Simpson Strong-Tie share the same focus on delivering efficient, flexible and easy to use software designed around what customers tell us they need,” added Bugbee.

“The entire CSD family and I are very excited to be teaming up with Simpson Strong-Tie. We’re confident that our joint efforts will deliver some of the best solutions available in the industry; today and into the future,” said Sean Nason, President & CEO of CSD. About Simpson Strong-Tie Company Inc. For nearly 60 years, Simpson Strong-Tie has focused on creating structural products that help people build safer and stronger homes and buildings. Considered a leader in structural systems research, testing and innovation, Simpson Strong-Tie works closely with industry professionals to provide code-listed, field-tested products and value-engineered solutions. Its structural products are recognized for helping structures resist high winds, hurricanes and seismic forces. The company’s extensive product offering includes engineered structural connectors, fasteners, fastening systems, lateral-force resisting systems, anchors and products that repair, protect and strengthen concrete. From product development and testing to training and engineering and field support, Simpson Strong-Tie is committed to helping customers succeed. For more information, visit strongtie.com and follow us on facebook.com/strongtie, twitter. com/strongtie, YouTube and LinkedIn. About Calculated Structured Designs Inc. Calculated Structured Designs Inc. (CSD™) is a Canadian-based software development company providing solutions for the engineered wood, architect, design, and building industries. Building with the most recent cutting edge development tools, CSD™ offers solutions for our industry leading designers, drafters, engineers, and builders.

CSD™ prides itself on creating advanced, accurate and compelling software tools that are designed for the experienced and beginners alike. On top of our commitment to building state of the art solutions, CSD™ holds customer support and services at the highest level. Ensuring all users have immediate access to live support and automated tools that will assist them in all aspects of our solutions including development and software interaction. For more information, visit csdsoftware.com.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

December 1st, 2015 #08197 Page #42

BOOTH # C8502: Come visit with us at NAHB’s 2016 International Builders Show (IBS) – January 19-21, 2016 Las Vegas, Nevada www.buildersshow.com Recognized for its engineering excellence, productivity-enhancing software and equipment solutions, and the industry’s best service, Alpine is a leading provider of building component software, metal connector products and equipment to component manufacturers. Since 1966, the company has partnered closely with customers to enhance their business and productivity. Alpine is also a leader in delivering software solutions that increase homebuilder productivity and profitability. The company is a division of Illinois Tool Works Inc., a Fortune 200 global diversified manufacturer with $14.5 billion in revenue in 2014. Visit alpineitw.com to learn more.

The award-winning Instinct Residential Design System from Alpine, an ITW company, streamlines the building process and facilitates collaboration. Instinct is a BIM-driven process that utilizes VisionREZ design software to facilitate collaboration among residential construction professionals by linking the residential CAD design work of builders, architects and engineers directly to component and framing professionals onscreen rather than onsite. Visit itwinstinct.com to learn more.

Paslode® is recognized for providing superior solutions for building professionals. Today, Paslode continues to be at the forefront of innovation by routinely introducing new patented technology to improve how new homes are built. From the revolutionary tetraGRIP™ Fastening System, which earned the first "No Nail Squeak" certification from the NAHB Research Center, to cordless finish and framing nailers that drive power results with portable freedom, Paslode systems increase jobsite productivity and decrease costly call-backs – adding to the builder's bottom line. The company is a division of Illinois Tool Works Inc., a Fortune 200 global diversified manufacturer. Visit www.paslode.com to learn more.

The Paslode tetraGRIP™ Subfloor Fastening System is a technological breakthrough in subfloor fastening for the residential builder. By using the tetraGRIP Sub-floor Fastening System, tetraGRIP offers the best of both worlds: the holding power of a 2” floor screw combined with the installation speed of a nail. Builders reduce the steps it takes to secure the sub-floor and dramatically reduce the potential for squeaks. tetraGRIP has been installed in over 40,000 homes with no subfloor nail squeak callbacks. Get the product that will differentiate you from your competition. Learn more at www.paslodetegragrip.com.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent OMPONENT

anufacturing ANUFACTURING

Safety First!

Don’t Forget!

You Saw it IN in THE the YOU S AW IT

Safety Meeting Topics From State Fund CA.

Roofing (Heat) Hazards

st December 1nd , 2012 2015 March 2 #08197 #05133 Page P AGE #43 #35

Adverti$er Peligros de los trabajos en techos (Calor)

El trabajo en techos usando asfalto, quemadores o soldadoras expone al trabajador a calor, quemaduras y esfuerzos excesivos que pueden resultar en lesiones graves o agotamiento por calor.

Durante su trabajo, use ropa de color claro y resistente a las llamas, con

Roofing work using tar, torches, or welding exposes workers to heat, mangas largas y pantalones largos sin vueltas para protegerse contra el calor y burns, and overexertion that can lead to serious injuries and heat illness. las quemaduras. Los cuellos y las capuchas le protegen la cara, el cuello y las During work, wear light-colored, flame-resistant clothing with long sleeves and cuffless long pants to protect you from heat and burns.

Collars and cowls protect your face, neck and ears. Wear a hard hat, safety boots with a non-slip sole and heel, and leather or heat-resistant gloves. Don’t tuck your pants into your boots. Face shields, side-shielded safety glasses, or goggles protect your eyes. A respirator protects your lungs from fume exposures.

Check the weather before you work. Work in high temperatures and humidity can lead to heat illness. At the job site, try to work in a cooling breeze and keep fumes away from workers. Do the heaviest work in shaded areas and the coolest part of the day. Stay hydrated by drinking frequent, small amounts of water. Remove your protective equipment when you take breaks.

orejas. Use un casco, botas de seguridad con suelas y tacones antideslizantes y guantes de cuero o resistentes al calor. No se meta los pantalones en las botas. Las caretas, lentes de seguridad con resguardos laterales o gafas (goggles) le protegen los ojos. Un equipo de respiración le protege los pulmones contra los gases.

Infórmese sobre el pronóstico del tiempo antes de trabajar. Trabajar en temperatura y humedad altas puede causar agotamiento por calor. En el sitio de trabajo, trate de trabajar donde haya brisa y trate de mantener los vapores alejados de los trabajadores. Haga los trabajos más pesados en áreas de sombra y en la parte más fresca del día. Manténgase hidratado bebiendo agua con frecuencia y en cantidades pequeñas. Quítese los equipos de protección durante sus períodos de descanso.

Para prevenir incendios, elimine del techo los materiales, gases y/o líquidos inflamables. Marque y proteja los artefactos permanentes del edificio, las tuberías de gas y electricidad. Selle todas las tomas de aire y aberturas en el techo para evitar que los vapores y las llamas entren To prevent fires, clear flammable material, al edificio. Tenga extinguidores de incendio disponibles. gases and/or liquids off the roof. Mark and protect Prepare un plan para emergencias. Conozca las rutas para permanent building fixtures, gas, and electrical lines. Seal off air intakes escapar del techo. Prepare comunicaciones entre las cuadrillas de trabajo del and roof openings to keep fumes and flame out of the building. Have techo, en el edificio y en el suelo. Conozca los números de teléfono de emergencia fire extinguishers available. Make an emergency plan. Know the roof en caso de incendio o emergencia médica. Conozca los primeros auxilios para escape routes. Set up communication between the roof crew, building, agotamiento por calor y quemaduras graves.

Para trabajar con asfalto caliente en techos, use una careta cuando alimente and ground workers. Know the local emergency numbers for fire and el asfalto a la olla o al camión tanque. Lo más seguro es bombear el asfalto medical services. Know first aid for heat illness and severe burns. caliente a un tanque de transporte en el techo y después a un carrito para For hot tar roofing, wear a face shield when you add tar chunks or aplicar con trapeador. Llevar asfalto caliente a mano en botes puede resultar en kegs to the tanker truck or kettle. Pumping the hot tar to a hot lugger tank salpicaduras y quemaduras. No suba botes de asfalto caliente por escaleras de on the roof and then to a mop cart is safest. Hot tar from hand-carried mano, use un elevador o cabrestante. Cuando lleve asfalto caliente en un bote, buckets can splash and burn you. Don’t carry hot tar buckets up a ladder; camine con cuidado para evitar resbalones y caídas. Mantenga los botes y los use a hoist line. When you carry a hot tar bucket, walk cautiously to carritos cubiertos hasta que use o deseche los materiales.

avoid slips and falls. Keep buckets and carts covered until you use or Los quemadores para techos de mano o sobre ruedas pueden exceder los dump the materials.

2000 °F. Nunca se debe aplicar el quemador directamente a los materiales del Hand-held or walk-behind roof torches can exceed 2000°F. Dont torch directly onto building materials, flashing, or voids in the roof. Be careful on heavy slopes; walk-behinds can roll away or tip over. Don’t pull a walk-behind backward on roofs that exceed a 4:12 slope. When you set the torch down, always turn it off and set it upright on its legs. Don’t hang a torch over the roof edge. To turn the torch off, turn off the propane fuel tank first, then allow the gas in the line to burn off. Stop work 2-3 hours before you leave the job to prevent hot spots or smoldering fires.

edificio, tapajuntas o espacios vacíos en el techo. Tenga cuidado en pendientes pronunciadas; los quemadores sobre ruedas pueden escapársele o volcarse. No tire de los quemadores sobre ruedas hacia atrás en techos que excedan una pendiente de 4:12. Cuando deposite el quemador, siempre debe apagarlo y colocarlo vertical sobre sus ruedas. No se debe colgar el quemador sobre el borde del techo. Para apagar el quemador, primero cierre la válvula del tanque de propano, y después deje que se consuma todo el gas que permanece en la manguera. Pare de trabajar unas 2 a 3 horas antes de irse del sitio para evitar puntos calientes o incendios que ardan lentamente.

Welding machines to apply plastic roof membranes reach 1100°F and use up to 220 volts of electricity. To prevent electric shock, use ground fault circuit interrupters (GFCI) and avoid rain or wet areas.

Dont touch grounded objects such as pipes or scaffolding while operating the equipment. Dont overheat plastic membranes, they can emit toxic compounds.

Las máquinas de soldar para aplicar las membranas plásticas en techos pueden alcanzar hasta 1100 °F y usar electricidad de 220 voltios. Para evitar choques eléctricos, use disyuntores de falla a tierra (GFCI, por sus siglas en inglés), y evite la lluvia y las áreas húmedas. No toque objetos conectados a tierra, tales como tuberías o andamios, mientras opera estos equipos. No caliente demasiado las membranas plásticas porque pueden emitir compuestos tóxicos.

The evaluations and/or and/or recommendations recommendations are are for for general general guidance guidance only only and and should should not not be be relied relied upon upon for for legal legal compliance compliance purposes. purposes. They The above above evaluations They are are based on the the information information provided discussed. We We do do not not make make any any warranty, warranty, expressed expressed or or based solely solely on provided to to us us and and relate relate only only to to those those conditions conditions specifically specifically discussed. implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627 online at FAX: 800-524-4982 PHONE: 800-289-5627 RRead/Subscribe EAD/SUBSCRIBE ONLINE AT www.componentadvertiser.com WWW.COMPONENTADVERTISER.COM FAX: 800-524-4982

The

JobLine

.com

Careers in the Truss, Wall Panel

and Engineereed Wood Components Industry

JobLine Hiring Zone Job Opportunities Available Candidates

JobLine.com, inc.

800-289-JOBS

The

JobLine.com, inc.

The

800-289-JOBS

www.thejobline.com

job opportunities available Truss Designer with Panel and EWP/I-Joist experience needed Now! Northeast ID: J12724 https://goo.gl/ib1p8z

Truss Designer - MiTek/Multifamily Texas ID: J12721 https://goo.gl/iAOQZV

Truss Designer & Panel Designer Midwest ID: J12704 https://goo.gl/syTje3

Truss Design Manager - Multifamily Texas ID: J12720 https://goo.gl/Zkwtu0

Truss Designer - Single Family Florida ID: J10658 https://goo.gl/Xe303x

Estimator - Multifamily Florida: ID: J12745 https://goo.gl/0B68Qd

Multifamily Truss Designer ***Promotion Opportunity*** South ID: J12718 https://goo.gl/vmmeBe

General Manager - Multifamily Truss Southwest ID: J10413 https://goo.gl/HhxWmL

Truss Designer GA ID: J12717 https://goo.gl/MQZWR0

Remote Truss Designer - Truss/I-Joist/EWP MD ID: J10683 https://goo.gl/rTVg8Z Truss Designer Northeast ID: J11700 https://goo.gl/0Dpe5r

Senior Multifamily Truss Designer Colorado ID: J12753 https://goo.gl/OVHbQY

Truss Designer Northeast ID: J11700 https://goo.gl/aQE3HP

Light Gauge Steel Truss Designer Light Gauge Steel Wall Panel Designer Colorado & Texas Job ID: J12732 https://goo.gl/F74UQa

Senior Multifamily Truss Designer Southeast ID: J12714 https://goo.gl/wCA4uh

Outside Sales - Truss Southeast ID: J12746 https://goo.gl/QqUtp4

Job Hunting?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL!

Candidates seeking jobs: theJobLine.com, Inc.

The JobLine specializes in recruiting and placing professionals in the LBM, Engineered Wood Products, Truss, Wall Panel, and Modular industries.

A s t h e C a n d i d a t e ’s intermediary, our process is unique, doesn’t require a resume, and only presents a you to an employer if you approve. All you need to do is create a JobLine Candidate Profile. It’s easy and on line. Just click on the New Candidate tab at the top of the page. Take your time and be thorough. It’s a tool for your future! You can create, save, and update at any time.

You can also specify your job, location, and compensation goals.

Our Recruiters are personally committed to helping you find opportunities that fit your goals.

To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab.

Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com PHONE: 800-289-5627

December 1st, 2015 #08197 Page #45

Production Manager - Truss South/Southwest ID: J12752 https://goo.gl/2ZZjIl Senior Truss Designer - Multifamily Texas ID: J10648 https://goo.gl/jtv2kT Production Manager - Truss Southeast ID: J10492 https://goo.gl/005OGx Truss Designer Central Texas. ID: J12723 https://goo.gl/Bm3Ox3 Truss Designer Texas ID: J12726 https://goo.gl/TlFaMJ Outside Sales MD/Northern VA ID: J12725 https://goo.gl/c8h8KW Location Manager in Training - Truss GA ID: J12716 https://goo.gl/KJlphu Truss Designer with Panel and EWP/I-Joist experience Northeast ID: J12724 https://goo.gl/ylHNE2

Light Gauge Steel Wall Panel Designer Colorado ID: J10666 https://goo.gl/ChhC6B Truss Designer Mid-Atlantic ID: J10655 https://goo.gl/1onRrz Multifamily Truss Designer East ID: J10662 https://goo.gl/CSH668 Inside Sales / Truss Designer Midwest ID: J10500 https://goo.gl/KcYQ0c Truss Designer / Senior Truss Designer Southwest ID: J11689 https://goo.gl/QiEv10 Senior Designer - Truss North Carolina ID: J10651 https://goo.gl/uXQf3f Regional VP - Truss Division Western US ID: J12709 https://goo.gl/eGsE0q Truss Designer - Single Family Tract AZ ID: J12702 https://goo.gl/PXH85a

Truss Designer with Panel and EWP/I-Joist experience Northeast ID: J12712 https://goo.gl/2SA7oc

General Manager - Truss Midwest ID: J12707 https://goo.gl/HtdofH Senior Truss Designer / Design Manager Midwest ID: J10649 https://goo.gl/jLygFB

Outside Sales - Truss Atlanta J12722 https://goo.gl/VDRUR5

Truss Designer - Multifamily/Single family Colorado ID: J11694 https://goo.gl/sLEhDe

Production Manager - Truss/Panel Upper Midwest ID: J12719 https://goo.gl/gMPCaY

Truss Designer & Panel Designer - Remote Remote ID: J12705 https://goo.gl/8dFouq

Read/Subscribe online at www.componentadvertiser.com

Designer - Wall Panel Iowa ID: J10591 https://goo.gl/8U9kSE Designer - Wall Panel Nebraska ID: J10592 https://goo.gl/lBCYwF Remote Designer - Wall Panel Work from Home Office ID: J10594 https://goo.gl/HKC81c Truss Designer - MiTek Midwest ID: J12701 https://goo.gl/LnogdT Multifamily Wall Panel Designer Arizona ID: J10616 https://goo.gl/x9OD7l Finishing/Shipping Supervisor - Beams Midwest ID: J11698 https://goo.gl/AurM7U Truss & Wall Panel Outside Sales I-35 corridor, OK and KS. ID: J11692 https://goo.gl/xU7QVU

.

Single and Multifamily Truss Designer Minnesota ID: J11697 https://goo.gl/GmVttJ Wall Panel Designer Northeast ID: J11696 https://goo.gl/M6xmdP Production Manager - Truss Midwest ID: J11695 https://goo.gl/SSWLXt

Attention Candidates!

Is your JobLine Candidate Profile Presentation Ready? Request a Go to Meeting on-line conference to review your current JobLine Candidate Profile. We can show you areas to improve, what’s hurting your chances, and how to improve your message. The content is still all about you, but with this new tool, we can show you how to make it tell your story better. See why we say “It’s like having a first interview”.

FAX: 800-524-4982

JobLine.com, inc.

800-289-JOBS

The

EWP Designer | Estimator | Inside Sales Experienced with AutoCAD, iLevel, TJ Beam, and TJ xPert software to produce framing layouts for TrusJoist engineered wood products. Responsible for working with builders and retailers to create the most cost effective solution for their project.

Creating quotes from layouts. Calculate gravity loads and sizing wood products to support the load. Understanding the IRC building code for wood-framed structures.

Explaining structural framing details to builders and salespeople. Training other designers in load development and design software.

Relocation: VA ID: C14506

www.thejobline.com

Available Candidates Truss Designer | Wall Panel Designer Wall Panel Designer | Remote Wall North Carolina Panel Designer 5 years truss design experience - focused Experienced candidate in the design and on floor and roof trusses and connectors. production of a variety of commercial wall I designed trusses and engineered wood panel jobs; small single and multi-unit retail beams for many residential, commercial, structures, medical care facilities, assisted multifamily, hotels, and developments. Once living structures and multi-unit multi-level the design was completed I would provide a apartment and hotel buildings. Coordinate detailed estimate/quote to the customer, and panel designs with truss and EWP designers assist in the final price negotiations. Once as well as loose material estimators for accepted a detailed cutting and stacking list supplying complete framing packages. was provided for the builders in the shop.

Prior whole house design using AutoCAD. I provided technical support as needed to Current in MiTek's Sapphire. Some truss builders. Jobsite visits were required from design experience but focus is wall panels. time to time for updates problem solving etc.

I spent some time training a couple of new people over those years. MiTek, AutoCAD, Relocation: MD I-Joist software experience, not on Sapphire.

ID: C14505

Remote Truss Designer

Remote Truss Designer

As Design Manager: Managed a design staff of eight people ensuring that workload was distributed and projects were completed in a timely manner. Worked with production manager and dispatcher to insure that work was prioritized accordingly. Trained new employees and coached existing technician in the use of MiTek design software and encourage them to use problem solving skills to come up with value engineered design solutions. Tracked incident information relating to design and fabrication issues so that management could focus on areas where process improvements or additional training are needed.

Design Roof and Floor trusses from blueprints. Engineer and send to production finished designs along with placement schematic and hanger info. Additionally, I had to engineer LVL beams for floor truss schematics. Has been out of design since the crash, but scored "Average" with only a Jobber. Considering average equals 15 years of experience, he should be able to get back up to speed quickly. Prior MiTek, some Alpine and Truswal, CAD, I-Joist, Beam, and Microsoft Office software experience.

As Designer: Designed roof and floor trusses on both tract homes and high end custom work. Interacted with both salespeople and customers on a daily basis to provide accurate layouts and truss designs.

Relocation: OR ID: C14497 Designer/Production/Estimating/Inside Sales - Truss/Loose Lumber 6 years truss industry experience. 3 in design using MiTek and 3 in production, starting as a builder, stacker, sawyer, forklift operator, then into supervision and production manager. Started learning design, estimating and inside sales 3 years ago. All at the same company. Is working toward an engineering degree. Software includes MiTek 20/20 & eFrame, Optiframe, and CadWorks. Products include Floor and Roof Trusses, and loose lumber.

Thom's Notes: We tested this candidate and his results confirm a solid 3.5 years skill level but he only had a Construction Master, no software. Not easy with only 3 years experience. I think this candidate is a hidden find!

Relocation: AZ, CA, CO, NV, OR, WA, AB ID: C10879 PHONE: 800-289-5627

Relocation: IN, KY, NC, OH, TN, USA South, VA, WV ID: C13446 Truss Design/Estimating Truss Estimator/Designer. - Intermediate.

Candidate has 10 years industry experience and 10 years experience in this position.

Products include floor trusses and roof trusses. Markets include single family, single family custom, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, and takeoff. Secondary duties include checking others work, repairs, customer service, inside sales, field measurements, software maintenance, training, and filling in for the Design Manager as needed. Software experience includes MiTek and I am willing to learn new software. Education: High School Graduate and Associates degree in Arch Tech.

Compensation desired $50,000: Salary.

Motivating factors: advancement, compensation, benefits, and job security.

Relocation: AB, USA - ALL States, AZ, BC, Canada - Eastern, CO ID: C10132

Prior experience: Design wall panels (some roof and floor trusses) for residential developers, multifamily, hotels, and assisted living buildings. I had regular contact with the builders, engineers, and architects. Once the design was completed I would provide a detailed estimate/quote to the customer, and assist in the final price negotiations.

Once accepted a detailed cutting, stacking diagrams and other paperwork was sent to the manufacturing shop.

Thom's Notes: Although the candidate has been out of the truss design job since 2007, he has remained in an architectural design, teaching and designing, and his test results show. Scored above average, faster than average, and only used a calculator and CAD. He is one of the best retread candidates I have seen this year.

Txt: C14465 to 406-210-1226 or call 800-289-5627 x1 Truss Designer | Truss Design Manager | Estimator | Estimating Manager Relocation: IL, IN, MI, OH Manage the design/engineering & estimating departments. Supervising 3-8 designers in roof and floor truss design/ engineering and I joist design. Coordinate truss repair drawings and timber truss designs. Personally manage large builder accounts. MiTek Sapphire, prior Alpine, Keymark, TeeLok. This candidate will work remotely and has some relocation areas acceptable.

Txt: C14456 to 406-210-1226 or call 800-289-5627 x1

Tell Them You Saw it in the

A

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com Read/Subscribe online at www.componentadvertiser.com

December 1st, 2015 #08197 Page #46 Design/Operations Manager Truss/Panel - Wood/Steel As Operations Manager: Responsible for all aspects of a major component manufacturing facility, including: profit/loss accountability, budgeting, inventory control and compliance with company policies in all facets of the facility's operations. Recorded a 4% profit, based upon sales, within three months of assuming the leadership position.

Responsible for a staff in excess of fifty persons including: engineering, sales, office, delivery and production personnel.

As Design Manager: Directly supervised and managed the engineering department staff of eight. Department was responsible for creating engineering and layout drawings for all orders. Scheduled and reviewed all work to ensure it was completed within company guidelines.

Led the conversion to MiTek 20/20 design software and MiTek MBA for order entry and quoting. Responsible for the setup and implementation of updated Quality Control program and established design and training standards for engineering staff and lead production personnel. Worked closely with manufacturing to facilitate the assembly and erection processes through the layout and design of components.

Relocation: MI, USA - Eastern, USA South, MD, VA ID: C11927 Senior Truss Designer + Panel/EWP/I-Joist/Framing Package Candidate has 15 years industry experience, 4-5 years experience in this position, and 10 years in subordinate positions leading to this position. Products include floor trusses, roof trusses, wall panels, I-Joists, EWP, hardware, and complete framing packages.

Markets include tract, single family, single family custom, multi-family, and light commercial. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, customer service, inside sales, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, TJ Expert, AutoCAD, and I am willing to learn new software.

Relocation: CA, TN, WA Txt: C10199 to 406-210-1226 or call 800-289-5627 x1 Plant/Location/General Manager-Truss Relocation: AZ Over 20 years experience including P&L responsibility for a truss manufacturing facility producing $18M, multiple shifts, 150+ employees. Very stable with a career track from Production. Computer literate, Microsoft Office.

Txt: C11270 to 406-210-1226 or call 800-289-5627 x1 FAX: 800-524-4982

JobLine.com, inc.

The

JobLine.com, inc.

The

800-289-JOBS

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL! Truss/Wall Panel/Management Plan direct & control daily operations of wall panel & floor panel division. I Provided a complete plant layout and directed the installation and start-up of a 2004 PanelPlus wall panel line. Evaluate productions, plan and manage budgets and direct QC inspections. Provided wall panel designer training & developed design, production & quality control guidelines. Oversee the analysis of data and information and report to upper management. Provided Site supervision & training for home builders and framing contractors. Lead the planning, pricing, scheduling, administration, implementation & installation of all products, floor panels, wall panels, roof trusses & building materials. A typical 2 story house w/basement (1600 +/- sq./ft.) would be erected in 2-5 days ready for shingles. 20 years experience including Outside Sales, coordinating Estimating, Sales, Design, Production, Delivery and Administrative functions of the truss plant with builders, engineers, architects, home owners, project managers, contractors and store managers. Established work schedules, created designs, layouts and Cad drawings as needed. Supervised up to 3 designers, including training new designers.

Coordinated schedules, manufacturing, delivery, billing and job sign off. Resolved problems including collections as needed.

Proficient with MiTek, OptiFrame, and Microsoft Office software.

Relocation: AK, BC, ID, MT, OR, CO ID: C11220 Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com PHONE: 800-289-5627

800-289-JOBS www.thejobline.com

Hiring Zone - Available Candidates Production Manager/Designer/EstimaPlant/Location Manager tor - Truss/EWP/Beams/I-Joist Floor & Roof Truss/Wall Panel Relocation: Virginia Relocation: USA - ALL States Overview: Overview: As Designer: Problem solving with Started in production, working as a builder, incomplete or questionable plans. sawyer, and forklift operator for 16 years.

Verification of roof and floor systems As a working shop supervisor he trained including beam adequacy as specified by 10-20 production workers over 2 years. As architects or engineers. Liaison between production manager, he trained, evaluated company suppliers and customers to local and suppervised 25 to 35 production area codes compliance inspectors and plans employees. Responsible for reporting of examiners. Development, manipulation, and lumber inventories and purchasing of plates modification od estimating subroutines in and hangers. Maintained production levels computer software to ensure profitability to meet customer's needs. Increased roof of work. Maintenance of all default and and floor production and lowered labor rates variable software was kept up to date from through hand-on training and leadership a codes standpoint. Hardware order and for 7 years. For the last 5 years he has been inventory control. Taking and verifying responsible for production operations of field dimensions. Verification of contract entire plant. Accountable to owner for the necessities and criteria for commercial productivity and profitabilityof the plant. applications in private, state, and federal In charge of all day-to-day operations areas. This includes contract negotiations, of production, inventory management, addenda, plans changes, and documents worker supervision and OSHA regulatory for proper design, manufacture, and compliances. Hired, trained, evaluated delivery of products. Company quality and managed a work force of 40 people, control representative to TPI (Truss- including 2 supervisors At one time had 3 Plate Institute). Including inspections, for shifts. Led company to 28.4 million BFT of verification of product to national standards. production at 94.1 BFT per man hour.

Estimate, Design, optimize, layout and when necessary consult with production Compensation: $70-80K and shipping on orders for wood roof Txt: C11504 to 406-210-1226 trusses, floor systems, and accompanying or call 800-289-5627 x1 beams and hardware. Software: BC Framer, Truss Plant/Location/General Manager FASTBeam, I-Joist, MiTek, Simpson, TJ Truss and Components Plant Manager with Beam, Microsoft Office. over 15 years of experience in the truss Txt: C12286 to 406-210-1226 industry who is looking to apply knowledge or call 800-289-5627 x1 gained while continuing to develop and Production/Design/Location Manager - grow within the management sector.

Truss/EWP/Package As Plant Manager: Create programs to Design and manage all truss operations. motivate employees to achieve peak purchase all lumber and plates. Arrange productivity. Hire, train, discipline and payment and shipping. Troubleshoot every terminate employees. Order lumber and all aspect including machinery. Implemented production materiel. Coordinate weekly our OSHA safety plan and requirements. production, sales and safety meetings.

Print invoices and remove material from Research cost on purchasing new equipment. active inventory using peach tree software. Attended monthly city council meetings to Set up new customer accounts and validate ensure codes were followed. Oversee credit references. Design wood and steel development of truss fabrication facility. joists and headers. Assist customer project Ensure compliance with Cal OSHA and problems for the best economical and Dot. Oversee shipping and optimize freight costs. Responsible for training leads and practical solution. supervisors on company policy’s. Program Prior: Truss design and supervise. Purchase and operate computerized equipment. building material. Arrange billing and shipping from start to finish. From the Proficient with Microsoft Programs, Excel, small detached garage to the large apartment Word, Outlook, ERP software Team growth and development through complex, I have done them all... effective feedback and ongoing mentorship Relocation: CA Excellent communication skills ID: C12276 Experience working with: Metal, Polymer ATTENTION EMPLOYERS Blends, Components, Finished Product We have over 1,000 Assembly, Clean Room, etc. registered Industry Professionals.

Tenacious, Professional, Detail-Oriented, All Job Searches are not public!

Strong Sense of Urgency We can search behind the scenes Lean Manufacturing Certified, Kaizen to find the right candidate for your opportunity.

Trained, Fork lift Certified Relocation: Arizona, Arkansas, California, See what I can do for you!

Colorado, Florida, Hawaii, New Mexico, Thomas McAnally Texas, USA - ALL States 800-289-5627 x1 Txt: C10500 to 406-210-1226 twm@thejobline.com or call 800-289-5627 x1 Read/Subscribe online at www.componentadvertiser.com

December 1st, 2015 #08197 Page #47 Designer/Remote Designer - Truss Relocation: Georgia Design and engineer roof and floor truss systems for residential, commercial and multifamily applications using Alpine AutoCAD design software. Communicate with builders, architects, and engineers to obtain initial truss design and follow up to ensure proper delivery and instillation and repairs if needed. Responsible for design, engineering, repairs, installation guides, job quotes and pricing takeoffs for some of the company's largest customers. Inspection of truss installation, placement and loading conditions at specific job sites in order to ensure customer satisfaction.

Txt: C12154 to 406-210-1226 or call 800-289-5627 x1 Outside Sales/Technical - Truss Relocation: Arizona, California, Colorado, Idaho, Minnesota, Montana, Nevada, New Mexico, Oregon, South Dakota, USA Western, Utah, Wyoming, Iowa, Oklahoma, Texas.

35 years construction experience, 25 in truss sales. Sells Trusses wholesale. Sells Trusses to Builders and Owner Builders and service the account through Design, Pricing, Production, Delivery, Installation, and problem solving. Also service National accounts which involves solving all the in-field problems. Dealing directly with the project Supervisor on missing trusses, damaged, missing plates, trusses don't plane, don't work, design errors, bad deliveries, dealing also with the building inspectors, and project engineers.

Compensation: Mid $30's base plus commission.

Txt: C10234 to 406-210-1226 or call 800-289-5627 x1 Design Manager/Senior Designer - LGS Relocation: New Jersey, New York Overview: As GM: Restructured, organized and currently managing the truss department for the company. Estimating and overseeing all truss estimates valued between $20,000 - $2,000,000. Designing and supervising truss designs for all running projects.

Managing projects including supply only and installations. Inventory control including ordering and maintaining approx. $200,000 stock material. Coordinating with Engineers and Architects on design/builds, loading and calculations. Sales coordination through proposal follow-up's, customer design meetings and jobsite tours.

As Estimator/Senor Designer: Estimating and design of truss projects. Project management. Coordination of third party engineering, subcontractor installations and material ordering. Always learning and looking for more efficient and economical business practices. Helped restructure the department to become accountable and more profitable.

Txt: C12165 to 406-210-1226 or call 800-289-5627 x1

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

December 1st, 2015 #08197 Page #48

Don’t Forget!

You Saw it in the

Adverti$er

Business & Professional Services Listings

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400

CDean@ComponentRunner.com Used Equipment Wanted!

Floor Truss Machines Floor Truss Web Saw

Before You Buy Equipment!

Save tens of thousands of dollars by first getting a complete assessment of all your current and future needs with a lean manufacturing consultation.  Unbiased, pro versus con assessment

of all manufacturing equipment

 No referral fees or commissions from

the plate or equipment vendors

 Onsite consulting services for the

765-751-9990

ALS or Miser Linear Saws Cyber AT, Servo Omni or AutoMill Trackless Roller Gantry Systems Lumber (Chord) Splicers Triad “Diamond Quad” Framing Tables Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment 48’-70’ Stretch Roll-Off Trailers Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Planx or Wizard Jigging Systems SL Laser or Virtek Laser Projection Systems Field Repair Press Stationary Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

wood truss and wall panel industry

NORMAL NET PROFIT GAINS ARE 3 TO 6 POINTS!

Toll Free: 800-382-0329 www.wasserman-associates.com

 75+ Clients - See Web Site for Testimonials  10+ Years Consultant Services All Areas Covered - 50% Shop / 50% Office

 25+ Years in Truss Industry

Todd Drummond Consulting, LLC www.toddwww.todd-drummond.com todd@toddtodd@todd-drummond.com Phone 603603-763763-8857

We welcome Angela’s Creative Design Studio to the Advertiser Family. If you ever wondered who does the fantastic artwork for Panels Plus, search no more. Let Angela create stunning media for your company. Visit her website at www.angelascreativestudio.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

www.mii.com/MiTekAssurance

Page 49

Component Manufacturing Advertiser

www.MiTek-us.com

December 1st, 2015