September 7th Advertiser

A #

158

PUBLISHED WEEKLY September 7th 2012 #05158

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Manufactured Structures Industry

Inside: ProSales Online: 84 Lumber Fights Four-Year Battle Over Claims of Shoddy Construction... page #3

Madisons Canadian Lumber Reporter: page 13

JobLine Hiring Zone: page 21-24

New Equipment Spotlight: page 21-24

Safety First Topics in English/Spanish: page 25

Business Directory: page 26-27

Reader Response Form page 28

www.mii.com/MiTekAssurance

8 Page 2

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Published Weekly

Adverti$er

September 7th, 2012 #05158 Page #3

84 Lumber Fights Four-Year Battle Over Claims of Shoddy Construction

Editor/Publisher

Thomas McAnally tmcanally@componentadvertiser.com

Advertising

Thomas McAnally Position available

Dispute in Maryland gets personal because of ties with Magerko

By Craig Webb 9/4/2012

Subscriptions

Renae McAnally

Distributed FREE

Perspective is everything when you look at five buildings that were put up in far western Maryland four years ago. To builder-developer Greg Mortimer, they're examples of construction by 84 Lumber that was so shoddy and rife with code violations that they can't be sold, while to 84 they're an example of what happens when a developer can't accept the truth and won't pay his bills.

Download FREE and

The dispute between Mortimer and 84 is heading to federal court this fall, and while the ultimate winner hasn't been determined, there's already been one loss: the relationship between Mortimer and 84's president, Maggie Hardy Magerko.

News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources

Mortimer will tell you repeatedly that he likes and admires Magerko. He says she used to own a home at a resort area in western Maryland where Mortimer has built and sold scores of houses, and she regularly dined at one of his restaurants and contributed to some of Mortimer’s charity causes. It was a business relationship as well, built in part on 15 years’ worth of buying upwards of $2 million worth of materials at 84 annually.

via e-mail subscription or on line at www.componentadvertiser.com

subscribe by e-mail at www.componentadvertiser.com

Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk

And even now—with Mortimer countersuing 84 for millions to fix 84’s allegedly shoddy construction work on his project—there’s a pleading note in Mortimer’s voice when he asks: “Do you think Maggie knows?”

The federal case now driving the dispute will see more depositions and fact-finding this fall.

But there’s already enough in the files for dealers to do their own case-study analysis on how to run an installed sales division.

At issue is 84’s work on two buildings at Mortimer’s Cedar Creek project and three more at his Timberlake project. Both are in Garrett County, the westernmost end of Maryland’s panhandle, and both are near the Deep Creek Lake and the Wisp ski resorts. Each building had two homes apiece.

Promissory Notes

Copyright 2008-2009-2010 -2011-2012 PO Box 16685 Fernandina Beach, FL. 32035

Mortimer says he has developed, built and sold more than 115 homes in the Deep Creek Lake area since the late 1990s. Until this dispute arose, he had bought from 84 consistently. He had put up all the buildings himself but occasionally used 84-provided labor supervised by his own foremen.

no reproduction in whole

In 2008, he was occupied with expanding his restaurants when the opportunity to develop Cedar Creek and Timberlake arose. 84 offered to manage construction of the residences.

Component Advertiser

or in part without permission from the component advertiser

eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above.

Archive Copies Available On Line www.componentadvertiser.com

Member PHONE: 800-289-5627

Mortimer agreed. But what 84 erected, he says in a March 2011 letter to Magerko, was “horrifically deficient and defective construction work” in which buildings leaked like sieves and, in at least one inspector’s report, appeared to be put together with barely a strip of tape or flashing. Leaks and related problems have made the buildings uninhabitable and unsellable, documents and affidavits supplied by Mortimer assert.

According to the developer, the problems began with a lack of oversight of the subcontractors 84 hired. “Essentially, 84 Lumber represented to me that 84 Lumber would construct these buildings so that I could attend to other matters,” Mortimer wrote in his letter to Magerko. “84 Lumber represented to me that it had construction experts specially trained for this work who would be assigned to my projects. Not only was this false; it now appears that the representations were fraudulent.”

To continue reading, visit: http://www.prosalesmagazine.com/news/

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

SAWS

Don’t Forget!

You Saw it in the

SAWS

Adverti$er

SAWS

September 7th, 2012 #05158 Page #4

SAWS

ASI B500 5 Blade Component Saw

•

2003 Spida Automated Truss Saw

Automated Stop & Automated Saw Rotation as directed by Truss Design Software

•

Touch Screen Computer

•

2 Available

$13,500 for One $22,500 for Both

Five blade saw that includes PC and cabinet and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut is 14 inches and the shortest angle cut is 18 inches. The saw cutsfrom 2x4 through 2x12 lumber up to 20 feet in length. Angles are set using digital readouts. Both the length and angle adjustments are power driven. $19,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

• • • •

1999 Mitek Smart Set Pro Semi-Automated 5 Blade Component Saw

Semi-Automated Saw with Touchscreen Input 5 Blades cut up to 2x12 Material from 18" to 20' in Length 240 Volt / 3 Phase $14,900 FOB CA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2001 Omni Mini-Miser Saw

-Auto Live Deck -Inkjet Print System D (Two Faces & One Edge) -Installation Available (quote upon request) $10,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FOB WY

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

September 7th, 2012 #05158 Page #5

SAWS

8

Omega Round Web Saw

LD

Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 765-751-9990

2000 Alpine AutoMill RS

SAWS

SAWS

2002 Hain Quick Rafter Cutter

2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw

1996 Mitek Combi Set 4 Blade Web Saw

SO

Model 344V saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer.

The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $16,900 FOB KY. Wood Truss Systems 765-751-9990

Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS NOW $20,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

-Waste & Incline Conveyor -Extra Set of Blades -220/440 Volt - 3 Phase $12,500 FOB MO

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

SAWS

2003 Delta 16" Radial Arm Saw

Delta 33-411 16" Radial Arm Saw. Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22".

Features "Turret Arm" construction which allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph power. $1,800 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

SAWS

SAWS

SAWS

R P ed r u ice ct io n

SAWS

Adverti$er

September 7th, 2012 #05158 Page #6

2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw

Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329

2005 Koskovich Auto Omni Component Saw Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical.

Wood Truss Systems 765-751-9990

Idaco Componamatic 4 Blade Component Saw & Idaco Webmatic 4 Blade Web Saw

-Hydraulic Powered Angulation & Carriage -Componamatic: Lengths to 20' -Webmatic: Lengths to 16' -Extra Set of Blades -Incline Waste Conveyor $5,900.00 Idaco Componamatic $5,900.00 Idaco Webmatic $900.00 Incline Waste Conveyor FOB AZ Wasserman & Associates 800-382-0329

1987 Alpine Timber Mill 620 Pro Saw

MD MH6C-20 / SN R0347 / 230 volts 3 phase / Saw Foot Print: 40’ overall (30’ Frame & 10’ Incline) x 7’-6” tall x 8’ wide /Bought new and used in small plant / See the operational video link. WAS $8,500 NOW $8,000 FOB GA. Salter Associates 770-434-1006 www.salter.com

2006 Mitek Cybersaw AT Component Cutter

2003 Alpine Speed Cut Metra-Cut Centerline Saw with Speed Measure

SN 530 / CTC Parker Automation Touch Screen Monitor / Fully automated or manual input / Automated five-blade component saw / Cutting performed by (2) 16” – 7 HP, (2)20”- 7 HP, (1) 32”-13 HP / / Mark model DOD 8400E Controller printer (not sure about printer operability) / 24” under carriage waste conveyor & Inline / All powered movements, cuts, 2x4 – 2x12 plus 4x2 lumber / Lengths cut from 14” (11’ in manual mode) to 20’ maximum length. / Minimum. 4 angle board cut is 22’’ auto/17” manual mode / 240 volts 3 Phase / One owner bought new / Shipped out of PA / Rigging available upon request.

Disassembled and ready for Inspection / shipment (except the material conveyor arms/conveyors). The saw has been stored inside building!

Industrial 18" Up-Cut Saw

-Model N-510R -2x12 Capacity Hinged Saw Guard -10 HP Saw Motor(230/460 Volt) -Add $400 for Heavy Duty 10' Infeed & Outfeed Roller Conveyor with Stands. $1,750 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

R P ed r u ice ct io n

Location: AZ Price: $5,500.00 -20' Speed Measure, Roller Conveyor & Stands -Turntable Air Brake Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Mechanical: 4.5 Stars Appearance: 4.5 Stars Lightly used /As-Is / Where Is : PA

NOW Asking $49,000

For Additional Information Call: (707)-434-1006 Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

•

anufacturing

Don’t Forget!

You Saw it in the

SAWS

SAWS

2006 Alpine AutoMill SC 5 Blade Automated Saw

2006 Monet DeSauw PD-6 Power Deck Lumber Feed System

Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $59,900 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com

-6 Chain Live Deck -16' Wide x 20' Long -Foot Pedal Control $6,750 FOB GA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Adverti$er SAWS

Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900.

Wood Truss Systems 765-751-9990

2005 Dimter OptiCut S700 Wood I-Joist Crosscut Saw

800-382-0329 1998 TimberMill 4-14 Web Saw

•

2006 TCT EZ Trimmer

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

PHONE: 800-289-5627

SAWS

2002 Koskovich Auto Omni Component Saw

Location: CA, Price: NOW $9,900.00 -Cut 4x2 and 2x4 thru 2x8 Lumber from 11" to 14' -(4) 16" Blades powered by 5 HP Motors -Digital Readouts -Chain Waste & Incline Conveyor -240 Volt / 3 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com

cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 765-751-9990

September 7th, 2012 #05158 Page #7

• • •

2004 MiTek Cyber A/T

Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor with Dell PC upgrade in enclosure for fully automated or manual part input, catcherside monitor, ink-jet marking system, belt scrap conveyor with incline. All powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode). 220v, 3ph power required. $56,900 FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

• • • • •

Optimizes, labels and cuts wood I-beams.

Features 66’ long infeed for up to 60’ long, wood I-beams with 42’ long outfeed. 90/90 cuts up to 14” depths x 3 ½” wide flanges.

Runs in automated batch mode or manual mode. Includes windows-based touch screen controls, console, ink-jet printing option on cut boards and 20 HP motor.

Saw is operational and available to demo, touch-screen is cracked and may require a replacement estimated at $5,000. Ink jet needs maintenance. 3 Ph power required.

(Saw cost $300,000 new in 2005.) $109,900 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

L-M Equipment Package Cross Cut System

65' overall length with 4 1/2" diameter hydraulic powered 4'-3" long rollers Bump Rollcase to flush up one end of the lumber unit Hydraulic controlled lumber clamping Hydraulic controlled 8' chain saw cutting bar with 10 HP motor Emergency stop safety bar at operator station 7 HP hydraulic pump system 24" wide belt scrap system Extra saw chains & 5 extra 8' cutting bars 480 Volt / 3 Phase Video: http://www.youtube.com/ watch?v=08z91mnOdbQ

Your Ad Could be Here

$19,900 FOB AZ www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

September 7th, 2012 #05158 Page #8

TRUSS EQUIPMENT

Tee-Lok 14' x 24" Diameter Finish Roller plus 4 Sections of Idle Conveyor

R P ed r u ice ct io n

-Two 5 HP Motors -Conveyor Section: 6'-6" x 12-0" x 33 1/2" FOB AZ - $6,500.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

800-382-0329

www.wasserman-associates.com

2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta

8

n

Your Ad Could be Here

PHONE: 800-289-5627

Price: $32,900 NOW $25,900 :: FOB TN Condition: Good Category: Roof Truss Description: 86' x 14' side-eject gantry system with (11) plastic top tables with strut, with (1) model 6800 gantry roller, (+/- 75') interior conveyor and (+/- 75') exterior rollers. Includes all available system hardware and stand-alone receivers. Can be paired with the 2008 MiTek finish press for an additional $15,200.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

e ic io r t P uc ed R

-32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase

1997 MiTek Tracked Gantry System (TN)

Read/Subscribe online at www.componentadvertiser.com

1996 MiTek Floor Truss Gantry System

Price: $13,900 NOW $11,900 :: FOB TN Condition: Good Category: Floor Truss Description: Model 66100 gantry with 24" dia. roller, builds trusses from 14" to 24" deep and up to 40' in length. Includes dual safety bars, pendant control and all available system hardware. $13,900 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

September 7th, 2012 #05158 Page #9

Don’t Forget!

Wood Truss Systems

You Saw it in the

Adverti$er

inc.

765-751-9990 www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1999 Gardner-Denver 30HP Compressor System

2008 IBS Yard Barn Wall Panel Line

PA

30 HP Gardner-Denver rotary screw air compressor with (newer) electronic control panel, model EBK99K. Rated 115 CFM. Also includes system dryer and 120 gallon air tank, recently dealer serviced. 460V, 3 phase power. $6,990 FOB IN

FO

B

-

$24,900 FOB MI

Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI

2004 Ruvo 925 Door Machine

Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA

2005 (4) Projector SL Laser System

R P ed r u ice ct io n

Four-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.

$31,300 :: FOB AZ Condition: Good 2005 Koskovich Auto Omni $52,900 FOB UT

NOW $49,900

Fax: 765-288-9991 PHONE: 800-289-5627

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

Phone: 765.751.9990 FAX: 800-524-4982

M ACdverti$er anufacturing

Don’t Forget!

You Saw it in the

Wood Truss Systems 765-751-9990 inc.

MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

Hundegger SC-1 $310,000 NOW $250,000 FOB NY

Model SC 1 saw includes vertical finger mill with 5.5 kW router motor, 40mm end mill., 25.5" diameter blade, 12.3 HP, 1480 RPM saw motor, and REA 16 pin, single-head ink-jet print option.

System includes Hundegger extended infeed deck with OEM automated clamping system which includes pressurized horizontal and vertical clamps that hold and straighten twisted, bowed, and curved lumber; outfeed framework: gripper wagon is mounted – rack and pinion system. Saw is a computer numeric controller (CNC) saw capable of cutting a wide range of roof, floor, and wall framing components, including I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam.

The saw can also cut 2x dimensional lumber stacked up to four pieces deep. Hundegger's Whole House Saw quickly and efficiently processes all types of cuts and profiles used in house construction. Comes with operator console, flat screen monitor, and industrial keyboard, Hundegger computer loaded with Windows XP/built in LAN card, and electronics cabinet which is A/C climate-controlled. Complete with waste conveyor system and incline, The SC 1 is upgradeable by OEM. OEM maintenance program, tech support and expert installation available at additional cost. 480 volt, 3 phase power.

TRUSS EQUIPMENT

2002 MiTek Tee-Tracker Gantry System

14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

TRUSS EQUIPMENT

Adverti$er

TRUSS EQUIPMENT

2002 Mitek RoofGlider 14' x 100' Side Eject Roller Gantry System

Mitek RoofGlider 14' x 24" Diameter Roller Gantry (Trackless). (13) Slotted Top Tables with Pop-up Skatewheel Ejectors. Roof Truss Jig Hardware & Bridge Plates. Roller Gantry Park Sections. 6 Powered Rollers, 6 Idle Rollers & 6 Receivers. Mitek 14' x 24" Diameter Finish Roller. $39,900 FOB CA Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ For more WizardPDS® Information visit: http://eideintegratedsystems.com/ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System 2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted). Slotted Top Tables with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers. Tee-Lok 14’ Finish Roller. Dismantled & Stored in Early 2011. Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™. $33,500 FOB SC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 MiTek TK-8 Clamp System

1999 Tee-Lok 40' Floor Truss Machine $18,800 FOB GA Wasserman & Associates 800-382-0329

2002 Robbins No-Rail Gantry System

Price: $79,800 :: FOB IL Robbins Side-Eject 14' x 103' working length trackless gantry system. Includes (2) Robbins gantry heads, (1) 1995 Alpine model 725 finish roller press with 15' throat, (14) slotted, steel-top tables with skate-wheel ejectors and (optional) 24" aisles, (15) powered conveyor rolls, (16) idle rolls and (13) outside heavy duty roll.

Each gantry head includes an AC inverter soft start control with 15 HP drive. System includes all available jigging hardware and aisle plates. 440v, 3phase. (snow in photos not available) Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

TRUSS EQUIPMENT

R P ed r u ice ct io n

omponent

September 7th, 2012 #05158 Page #10

MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 765-751-9990

2005 MiTek RailRider End Eject Floor Machine

2003 MiTek Railrider Floor Machine

Model 82500-502, 24 inch diameter gantry head with riding platform and push-button controls. Machine builds floor-trusses to 42 foot working length (54 foot overall length) truss depth capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, plate storage along table edge. Includes all available hardware. 230 volt, 3 phase electrical. $39,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks.

Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 765-751-9990

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

Don’t Forget!

You Saw it in the

Adverti$er

September 7th, 2012 #05158 Page #11

TRUSS EQUIPMENT

800-382-0329 2006 MiTek Infeed Deck

2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity.

Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 765-751-9990

R P ed r u ice ct io n

Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution.

Wood Truss Systems 765-751-9990

2001 Alpine Track Gantry Heads (Qty. 2 Only 1 left)

Two (2) 24” diameter x 14’ throat, track gantry heads, 15’-0 ¾” rail centers, two available at this location. Price per each.

460 / 230 volt, 3 phase electrical.

Price: $6,900 ea. :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 (50') Robbins Roof Truss Gantry

MD Super Torque / 10 HP / 7 ea. (5’x14’) steel tables with 2x6 underlayment and 1” dense plastic top / Includes (4) ea. uni-strut channels per table /(1) ea. pop-up skate roller per table / (6) Receiver arms / No Exits rollers / 15 ea. 24’x16”x1’ bridge plates / (65’) floor track / 230 volts 3 phase.

WAS $15,000 NOW $14,500 FOB GA Salter Associates 770-434-1006 www.salter.com

R P ed r u ice ct io n

Design your own custom roof truss gantry!

2003 Alpine RAM Easy Rider 14’ x 104’ Trackless Roller Gantry System -2003 Alpine RAM Easy Rider 14’ Roller Gantry (Trackless) -104’ of Steel Slotted Top Tables with Pop-up Skatewheel Ejectors -Roof Truss Jig Hardware Location: -Roller Gantry Park Sections -Center Powered/Idle Exiting Conveyor with Receivers -2002 Alpine 15’-6” x 24” Diameter Finish Roller -(20) 14’ Outfeed Gravity Rollers with Stands -240 Volt / 3 Phase

CA

WAS $69,900 NOW $59,900

Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

8 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Klaisler 6-40 Traveling Floor Machine

Tee-Lok Side-Eject 24" dia Gantry

165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware.

System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Adverti$er

TRUSS EQUIPMENT

2006 Koorsen Plate Detector

Truss plate detector significantly reduces field repairs by indicating missing connection plates. Features adjustable height and missing plate alarm. Button controls on stand-alone console. +/- Footprint dimensions. 17’ x 3’ x 5’. Compatible with any type of truss roller. 110 volt, 1 phase electrical. $6,800 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

September 7th, 2012 #05158 Page #12

TRUSS EQUIPMENT

2006 MiTek Tracked Gantry Head

Price: $8,900 :: FOB TX 24" x 14' tracked gantry head with double push button pendant controls and operator platform. Fits 15'-1 1/2" rail centers. 208v, 3ph power.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

800-382-0329 1994 Pacific Automation Auto 8 Gantry System

8'x40' hydraulic press system specifically designed for smaller trusses. No finish press required, system includes single joystick control, operator platform and drilled / tapped, steel, table building surface. 50 ton press capacity. 230 Volt, 3 phase electrical. $10,990 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Page 7 No Change...

04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform.

24 roll -10HP motor w/electric softstart. Item F1026 Truss Machinery Connections 800-580-6430

PHONE: 800-289-5627

TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press

6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase .

FOB GA $14,500 Salter & Associates

770-434-1006 www.salter.com

2005 Koskovich Jet-Set

23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990

www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Don’t Forget!

You Saw it in the

JobLine.com

the

800-289-JOBS

Time To Hire?

We’re here when you need help!

WALL PANEL EQUIPMENT

Panels Plus Manual Framer

PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker $22,500 FOB NE. NOW $17,900 Wasserman & Associates 800-382-0329

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

The diverse, wide-ranging number of lumber industry players became part of bigger companies by the early 2000s, as mentioned in last week’s Component Advertiser, and there started to emerge a situation of less volatility and more control by producers. Control over volumes, inventories, and -- most importantly -- prices. This situation became even more exacerbated by 2003, when the largest of the companies -- without question competitors among themselves -- launched into a philosophy of trying to strangle out the smaller companies.

Most often it worked, especially on the west coast. The major players are so incredibly huge, with such a large number of sawmills and such large timber supplies, that the smaller companies hardly had any choice in how to run their own business.

How can someone with two sawmills and a panel mill defend against the practices of a huge company working right next door? Especially when that huge company is the only pulp mill close by, and is a vital destination for sawmill residuals thus an important revenue stream.

There were no viable dimension lumber producers with only one sawmill in, say, British Columbia, after 2000. For many of the remaining medium-sized companies it became a choice between being absorbed by the dreaded major or going under completely.

During the course of all this, it is important to remember another issue critical to the solid wood industry which wouldn’t have had an impact on the economy at large, and that was the perpetual softwood lumber disputes.

One, Two, Three, and Four, they are so numbered from the 1980s to 2006. In between there existed for a time a softwood lumber agreement of sorts, which was very agreeable to both Canadian and US players.

This is why lumber was never brought into the North American Free Trade Agreement, because at the time of those negotiations there was a good bilateral agreement already in place.

When that expired the Canadian producers had no legal leg to stand on and up came dispute Number Four, with its punishing duties of 27 per cent.

Dimension Lumber Key Prices

For this week’s prices subscribe to Madison’s at www.madisonsreport.com

Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16

Last Week $314 $318 $312 $365 $375 $318 $310 $415 $328

Tr

16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 765-751-9990

WALL PANEL EQUIPMENT

Adverti$er

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Change +8 +8 +4 +5 0 +3 +5 +5 +18

g

anufacturing

av el

omponent

in

M ACdverti$er

September 7th, 2012 #05158 Page #13

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

WALL PANEL EQUIPMENT

Don’t Forget!

You Saw it in the

WALL PANEL EQUIPMENT

Adverti$er WALL PANEL EQUIPMENT

2005 Panels Plus Framing Table

Reconditioned Panels Plus 10' x 20' Squaring Table

-Squaring Stops & Roller Conveyor -Motorized Telescoping Arms (for wall height adjustments) -No Rail or Track on Floor Increases Operator Safety and Simplifies Clean-up -Excludes Router or Panel Bridge $10,900 FOB NE Wasserman & Associates 800-382-0329

Panels Plus manual wall framer builds walls to 16’ length and from 8’ to 12' in height.

Includes 3-gun tool dollies each side, stud locaters, pop-up skate-wheel transfer, and motorized telescoping arms for adjusting wall height. Table also includes subcomponent layout tables and skate-wheel transition conveyor. (120v, 1ph, 100 psi air supply). Table is a trackless design for easy install. $15,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

n

e ic io r t P uc ed R 2004 Virtek LaserMC Wall Panel Cutting & Marking System

-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output -Vista Angle Boss Cut-Off Saw -20' Capacity -Left to Right Material Flow -Environmental Computer Enclosure with Computer/Monitor -Laser is burning light -Used for 2 years Location: KS, Price: $27,900.00 NOW $25,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2012 MiTek Wall Panel Framing Light Bars

In use for only four weeks. 16 foot long, enclosed set with console, stand, cables and pc. Used to indicate wall panel start point and sub-component locations when used with a framing table. Light bars are crated for shipment. Spare card, controller and plexi-glas cover included. Framer shown in pictures not included. 110 volt, single phase electrical. Price: $23,500 :: FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

WALL PANEL EQUIPMENT

2007 Panels Plus Sub-Component Nailer

2002 Mango Automated Wall Extruder OEM Reconditioned

Price: $39,900 $28,500 :: FOB TN Auto feed wall framer. It has a 16’auto conveyor on each side of the incoming feed system (out feed conveyors are not included). The Mango Automated Wall Extruder is operated using data downloaded from virtually any wall design software in the office. The wall extruder is a fast, safe and efficient way to automate your existing manual wall equipment. The system accurately sets the plate positions in front of the nail guns to ensure that the studs are in the correct position. The studs (or other features that are being assembled) can be placed anywhere, not just on fixed centers. The standard machine is designed to allow for 2 nails in each end of the stud 3 nails for 2x6 wall. Plate sizes can be 2x4 or 2x6 material without need for manual adjustment for nail position or number of nails. Features include: Minimum wall height = 6’8”, Maximum wall height = 12’0, Minimum wall length = 1’0”, Maximum wall length = 16’ . 2 x nail guns required, Able to fire 3.5” stick nails, or coil-feed nails, to suit nail reels, Power: USA / Canada 110 Vac 6 Amp, Air: 100 psi / 8cfm (Machine is disassembled and ready for shipping) Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer

2" Ball Coupler. Safety Chains with Hooks.

2,000 Lb Jack with Wheel. Wheel Fenders.

12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands.

Galvanized Rollers & Cross Members.

Stainless Steel Guide Pins on 16" Centers.

Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

PHONE: 800-289-5627

September 7th, 2012 #05158 Page #14

Read/Subscribe online at www.componentadvertiser.com

Maximum Opening: 17" x 17 1/2". On/ Off Switches for Each Nail Gun. Button to Activate Squaring Stop, Foot Pedal to Activate Clamping, Excludes Nail Guns $7,500 FOB LA Wasserman & Associates 800-382-0329

2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies

$10,900.00 FOB TN Wasserman & Associates 800-382-0329

Basic Automation 12' x 16' Interior/Exterior Wall Panel Line

Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge, Includes (25) Senco Staple Guns. $14,900 NOW $13,400 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

PHONE: 800-289-5627

Don’t Forget!

You Saw it in the

Adverti$er

Read/Subscribe online at www.componentadvertiser.com

September 7th, 2012 #05158 Page #15

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Don’t Forget!

You Saw it in the

Adverti$er

TRUCKS

&

TRAILERS

September 7th, 2012 #05158 Page #16

TRUCKS

&

TRAILERS

765-751-9990

Combining the qualities and expertise you should expect from an industry supplier

2005 Viking ADT Wall Panel Framing System $37,990 FOB TX

2001 Ford F-250 With Rolloff Trailer Price: $18,900 FOB IN Condition: As Is, Where Is

Viking framing station with PreStage table and conveyors. Framing station model PS-Special, includes stud locators (16” & 24” centers), skate wheel ejectors, walk-through aisles, ½ HP motor and two (2) powered tool carriages.

Discharge speed of 12” per second. Once staged the framing sequence is event driven: guns fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4’-2”’ to 12’0” high, in lengths up to 20’ long. Includes two (2) 4’x 8’ plastic top setup tables, (1) set of 5’ wide x 10’ long skate wheel conveyors and (1) set of exit conveyors 24’ long.

System supported, and installation available from the OEM (Sold new for $132,000).

480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Guns not included.

2001 Ford F-250, standard cab with Triton V-10 gas engine, 140,000 miles, includes a Tri-Star rolloff, dual-axle trailer with a gooseneck mount, mechanical ‘landing-gear”, GVW: 14000#.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Your Ad Could be Here

1997 ASI 48-72' Stretch Trailer

NEED HELP WITH YOUR PANELS PLUS EQUIMENT?

Price: $16,900 :: FOB TN Condition: Good Category: Trailers and Rolling Stock Description: ASI model 5AM stretch trailer from 48 to 72 feet, features sliding tandem axles, electric roll-off controls, fifth wheel connection and hydraulic lift.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

We offer:

Disassembly & packaging of equipment.

Installation by trained personnel.

Adjustment and calibration of equipment.

Training for operators and maintenance workers.

Recommend upgrade options.

Assistance in getting your fastening tools mounted and operational.

Contact Information:

email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

2007 Mitsubishi FD70 Forklift

FD70 forklift weighs 23,500 lbs., featuring an OEM maximum lift capacity of 15,500 lbs., with a maximum lift height of 196 in.

(16 ft. 4 in.). Features a 90 HP diesel motor powering two (2) wheels, two (2) forward gears, two (2) reverse gears, driver’s cab, and extended forks (tines) for handling wood components. $38,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

You Saw it in the

TRUCKS & TRAILERS

Adverti$er

TRUCKS

&

TRAILERS

TRUCKS

&

TRAILERS

R P ed r u ice ct io n

TRUCKS & TRAILERS

Don’t Forget!

September 7th, 2012 #05158 Page #17

1994 Wabash T-30 Trailer

48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 765-751-9990

2008 Precision 42-60' Stretch Roll-Off Trailer (4001c)

Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1999 Western Star Truck with National 990 Crane

Model 4964F Truck with 20’-6” Flatbed.

475 HP CAT Engine. 8 Speed Manual Transmission. 215,885 Miles, National Model 990 Crane, Crane Capacity: 46,000 Lbs. 90’ Boom with Jib Option. $74,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1996 Lakeside 42'-60' Stretch Roll-Off Trailer

Location: NY Price: $7,500.00 -Sliding Tandems -Hydraulic Neck Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Price Reduction

Page 15 No-Change ...

2000 Raglan Trailer 48’

48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 765-751-9990

1997 Haulin 48' Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck -DOT is Current FOB IN, $5,900.00 Wasserman & Associates 800-382-0329 www.wassermanassociates.com

01 Haulin (Stretch 48 -70 )

2004 Pratt 48' Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com

$8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust.

Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430

1989 Western Star Boom Truck & Trailer Combo Price: $89,990 :: FOB WA Model 4964F boom truck, NTC 365 Cummins diesel engine, 18-speed transmission installed in 2008 (has only 5,000 miles on it), 1994 National Crane model 600C, 81 foot crane, recently refurbished at a cost of $10,000, 447,000 miles. 54,000 lb. GVWR. Includes one (1) custom built, peak-up truss trailer, with three axles, stake pockets, 1/4" thick steel wheel fenders, moveable light bars. Trailer can be purchased separately for $11,990.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

1999 Sterling Tractor

2000 Teledyne D50 Forklift

1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

2005 Pratt 36'-50' Stretch Roll-Off Trailer

Sliding Tandems, Hydraulic Neck. $17,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Terex Teledyne D50 straight mast forklift with 5,500 lb. capacity, 120" lift height and diesel power to (3) all-wheel drive. $8,996 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

TRUCKS

&

anufacturing

TRAILERS

Don’t Forget!

You Saw it in the

MISC.

Adverti$er

Wood Truss Systems inc.

September 7th, 2012 #05158 Page #18

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1997 PCS Hercules Auto-Feeder

1995 Wabash 36'-50' Stretch Roll-Off Trailer -Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires $9,900.00 FOB CO. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Your Ad Could be Here

2001 Klaisler Rolsplicer

The industry's best floor truss chord splicer, splices both 2 X 4 and 2 X 6, splices in vertical orientation and forces lumber together (compression) prior to plate pressing, single operator easily trained to accomplish accurate, reliable splices.

Includes dual recessed simultaneous activation buttons, guarded motors and sprockets, 3 HP motor, 10 foot infeed and 20 foot outfeed conveyors. 460v, 3 phase.

(Open listing to view OEM video).

Price: $6,800 :: FOB IL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Refurbished 2005 Hain 20Ft. Measuring System

MISC.

2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet.

110 volt electrical.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

$4,499 FOB SC Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed.

460V, 3ph.

MISC.

MISC.

Like New Altman Model 122 Dustless Sheetrock Saw

Call for Price. FOB NE. Wasserman & Associates 800-382-0329

Ruvo 2200 Stair Saw

Price: $26,667 :: FOB FL Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge.

Wired for 230 volt, 3 phase and 30 amp electrical service.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

1999 Sullair LS-10 Compressor with SR Dryer

25 hp Sullair rotary screw air compressor, model LS-10. Rated 111 CFM @ 100 PSI. Also includes Sullair SR-175 dryer. The compressor is 230/460V and the dryer is 230V, 1 phase power. $8,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Murphy-Rodgers MRT-9A Dust Collector

-Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums

Read/Subscribe online at www.componentadvertiser.com

$990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

September 7th, 2012 #05158 Page #19

Don’t Forget!

You Saw it in the

Adverti$er

Wood Truss Systems

765-751-9990

inc.

Price Reduction

800-382-0329

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

8

2006 Omni Miser Automated Material Picking System $89,000 FOB SD

-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000!

Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!

Click for WoodRunner Details: http://apexmw.com/ MISC.

2005 Williams Pulverizer

Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.

$8,000 FOB TN

MISC.

MISC.

MISC.

2006 Allison Material Carts

Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 765-751-9990

2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 MiTek Lumber Splicer

MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen.

Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

Lumber/Teeter Carts

-20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

MISC.

Don’t Forget!

You Saw it in the

MISC.

Adverti$er MISC.

September 7th, 2012 #05158 Page #20

Door & Stair Equipment

MMC 5-Arm Infeed Deck

Roller Table (16' x 5' x 32")

1999 Holz-Her Accura "S" 14' Beam Saw

Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329

-Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Wood Truss Systems

Handles lumber from 4’ to 20’ and features 5 rails/pedestals, foot pedal controls, safety-guarded drive chain, heavy-duty steel I-beam and tubing construction and adjustable swivel base feet. Foot print +/14 x 20’. Price: $5,500 $4,500 :: FOB TN Wood Truss Systems 765-751-9990

Door & Stair Equipment

inc.

Used Builders Automation Model 2210 Staircase Assembly Clamp

Location: NE, Price: $5,900.00 Up to 20’ Stringers with Maximum Width of 54”. Pneumatic Clamping (2 CFM at 110 PSI). 9 Side Clamps Wasserman & Associates 800-382-0329 www.wasserman-associates.com

R P ed r u ice ct io n

MANUFACTURERS’ REPRESENTATIVES

Norfield Vertical Door Loader

Ruvo 2200 Stair Saw

26" Wide x 24" Deep x 66" High with 6" Legs. Polycarbonate Window. WeldedIn 12" Deep Keyboard Shelf. Three Point Locking System. Fan for Hot Air Evacuation. 2 Adjustable Shelves in Lower Cabinet. $950 FOB NE Wasserman & Associates 800-382-0329

$22,677 FOB FL AS NEW

2007 MiTek Ready Feed Live Deck

Auto-Feed live deck for component saw.

14' wide x 20'-6", 5 rails, safety-guarded sprockets, HD I-beam construction, footpedal control and adjustable height. Easily shipped and installed. 230V, 3 phase power. $7,500 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

Norfield 1020 Double-End Trim Saw

Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 765-751-9990

R P ed r u ice ct io n

NEW Strong Hold Topview Computer Cabinet

Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied.

Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.

2,800 Lb Capacity. 48" Stack Height 480 Volt / 3 Phase. $9,500 FOB TX Wasserman & Associates 800-382-0329

Full House Double End Trimmer

765-751-9990

www.woodtrusssystems.com

Cut Casing, Jambs, Door Stop & Brickmold. $5,850 NOW $5,000 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Triad/RUVO Model 928 PreHung Door Machine with Triad/RUVO Model 1275 Door Assembly Table

Location: NY Price: $28,800.00 NOW $25,000 -Excludes Bostitch Staple Guns Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 Hain Vent Block Drill

-Handles block sizes ranging from 2x4 through 2x12 -Drills 1,2,3 or 4 holes at a time -220/440 Volt, 3 Phase, 5 HP Motor Location: CA Price: $4,000.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

September 7th, 2012 #05158 Page #21

new equipment showcase

Automated Jigging System

Hiring Zone

JobLine.com, inc.

The

800-289-JOBS

AUTOMATE YOUR ROOF TRUSS LINE WITHOUT MOVING A TABLE

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL!

Technical Outside Sales AUTOMATE

SETUP TRUSS PROFILE IN 60 SECONDS OR LESS

RETROFIT ANY ROOF TRUSS TABLE; WOOD, PLASTIC OR STEEL MINIMIZE DOWNTIME,

ONSITE INSTALLATION SAVES THOUSANDS OF DOLLARS AS OPPOSED TO OTHER RETROFIT SYSTEMS

THE LEAST EXPENSIVE DUAL PUCK RAIL SYSTEM ON THE MARKET, GIVES YOU A COMPETITIVE EDGE

To learn MORE about MangoTech Automated Jigging visit us at www.MangoTech.com.au Contact us at Sales@MangoTech.com.au or 866-GO-MANGO

IMMEDIATE! SENIOR TRUSS ESTIMATOR Texas NOW! send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com

Strictly Confidential!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

California NOW!

Agressive - Experienced with MiTek Software Sales/Layout Estimating Roof & Floor Truss Focus on High End Custom Homes & Multifamily

send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com Strictly Confidential!

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

September 7th, 2012 #05158 Page #22

Don’t Forget!

You Saw it in the

Hiring Zone

Adverti$er

new equipment showcase

JobLine.com, inc.

The

800-289-JOBS

Introducing the:

Purlin Plunger

SET TRUSSES FASTER WITH PREDRILLED PURLINS 





Time To Hire?



We’re here when you need help! visit: www.thejobline.com

Pre-Drill & Mark Only 2-3 Hammer Blows (60d Nails) Purlins Reduce Field Labor by 25-30% Set Trusses Faster & More Accurate Reduce the Exposure to Jobsite Fall Hazards Pre-Drilled & Marked Purlins (Shown)

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL! Senior Designer All Hats - Truss/Panel

Location: Rural Northeast This opportunity is primarily a Senior Truss Design job, with some panel, I-Joist and EWP design. The employer would like to find an "All Hats" type with inside sales, scheduling, and estimating experience, able to help them grow their small business.

Location is rural, great hunting, fishing, hiking, and outdoors. Not within an hour of a big city, but several options within 2 hours. Management is looking for someone who can bring "Been There & Done That" experience to their home grown team.

No LEAN/5-6S/aggressive types needed.

Must be hands on. Software experience acceptable includes MiTek, Alpine, Truswal, ITW, Keymark, or equal. Must have JobLine Senior Designer rating.

Compensation: $40's-50's, depending upon what the candidate brings to the table.

Probably tops out in the $60's for a perfect match, but understand this lifestyle is Rural Northeast, not Baltimore, Chicago, or New York... ID: J10524

Catch us on thejobline.com

Visit us at www.SQ-1Design.com

Specifications and Gallery 

Multi head, (3) 1/2HP industrial-duty drill head design allows for pre-drilling purlins from 4’up to 20’ in length with 5.6 sec. cycle time



Drill heads feature “quick stop” clamping for fast drill head location movement



Drill bit detection provides warning to operator in the event of drill bit failure



Features shaft driven infeed/outfeed material handling chain conveyor. Belt conveyor transfers drilled purlin to outfeed deck with auto-eject feature

Vertical and horizontal air clamping results in consistent and accurate hole placement



Touch screen PLC controls create user friendly operator interface for both manual and automatic operation



Automatic operation features material detection devices resulting in activating indexing of all sequences and transfer to outfeed material deck.



1ph. 230V power

Clamping

PLC Touch Screen Control

Drill Bit Sensor

Centerline Marking

Outfeed Deck

Outfeed Belt Conveyor

Outfeed Ejectors

Drill Head Adjustment

Sean Hubbard 317-440-2804 Sean@SQ-1Design.com Fax 320-210-4237

Jay Bunyard 317-354-5438 Jay@SQ-1Design.com Fax 320-210-4237

Scan our QR code to view our latest video http://www.youtube.com/watch?v=78A3uIJGj4U

PHONE: 800-289-5627



Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

September 7th, 2012 #05158 Page #23

Don’t Forget!

Adverti$er

You Saw it in the

new equipment showcase

On the Cutting Edge...

New! Porta Field Press

New! Roll Splicer

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Phone: 530.295.8068

Fax: 530.295.0468

Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672

Features: • • • • • • • •

Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area

Call 770-434-1006 For Details Salter & Associates www.salter.com

We go to any lengths to expand your opportunity.

PHONE: 800-289-5627

Features: • • • • • • • •

Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place

Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com

You find the opportunity -- we’ll build you the products to meet it.

Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

An

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Hiring Zone

JobLine.com, inc.

September 7th, 2012 #05158 Page #24

Don’t Forget!

You Saw it in the

Adverti$er

new equipment showcase

The

800-289-JOBS

800-382-0329 email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

@JobLine Business Development Manager Laminated Beams

Location: South (Carolinas centered) Work with the Sales manager to determine commercial business potential in the South and surrounding states. Build relationships with contractors, architects, designers, and business owners in the commercial industry using Glulam products; responds to RFQs, sources take offs & shop drawings, prepare quote proposals & letters, estimates freight, generates bid documents, completes internal files, and manages orders & shipments for awarded bid.

Txt ID: J10485 to 406-210-1226

Design Manager/PE CET, AScT

PE, CET, AScT Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities..

The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family.

Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region.

Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here.

Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program.

Canadian CET or AScT, or Degreed Architectural or Civil Engineer preferred.

Detailed job description is available.

Txt ID: 10486 to 406-210-1226

PHONE: 800-289-5627

NEW Monet DeSauw Wood Finger Jointing Line

Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada.

Advantages: -Reduce Waste

-Positive Ecological Impact

-Produce Straight Material

$79,900 FOB MO

www.wasserman-associates.com

Immediate Search Estimator - Truss/Lumber Location: Texas

Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package design experience is a plus.

Projects include commercial, multifamily, government, and industrial.

Compensation $45-55k (minimal relocation assistance possible) Txt ID: J10498 to 406-210-1226

Priority: Immediate Search Outside Sales - Truss/Panel Location: DC/Metro

Looking for an Outside Sales rep in the DC/Metro market and surrounding areas who can bring $3-4M+ to the table. Floor Truss, Roof Truss, Wall Panels and EWP. This highly successful manufacturer has multiple plants and can easily handle all you can sell. Excellent reputation for quality, competitive pricing and on time delivery.

Manufactures Roof & Floor Trusses, Wall Panels and EWP. Compensation: $70k-+, 6 figures possible Thom's Notes: One of my top 5 employers.

Great benefits and outstanding advancement potential.

Txt ID: J10496 to 406-210-1226

Hiring Zone

Priority: Immediate Search Designer/Senior Designer Truss/Panel/I-Joist/EWP Location: Edmonton, Canada

Priority: Immediate Search Production Manager - Truss/ Panel Location: Midwest

This is a Job in EDMONTON CANADA

Direct production of wall components, roof and floor trusses and floor systems for custom, single family homes. Plant produces 175+- homes a year. reporting to this position are 8-15 production workers.

Responsibilities include production, scheduling, costing and purchasing 5-10+ years components experience required. Will consider move up if qualified.

I am looking for a high energy designer who is willing to learn and apply all aspects of truss, panel, I-Joist, and EWP design.

Experience required: 5+ years in component design plus JobLine skills evaluation above average. Primary duties include design, layout, optimization, and cutting/ production documents. Secondary duties include customer service. Skills required include MiTek software, AutoCAD, will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, framing components, I-joists, EWP, hardware.

Compensation: Salary from $45-75 CN depending upon experience and performance. Relocation is open to negotiation.

Thom's Notes: If you are a US Citizen, the employer will also consider your application. NO DEGREE REQUIRED! Txt ID: J10497 to 406-210-1226

Read/Subscribe online at www.componentadvertiser.com

Compensation: $45-60k base salary, plus bonus potential when profits return. Vehicle w/expenses provided. Average 45-50 hours per week in peak season. Company benefits package, bonus program, vacation plan, and 401k program are detailed in our Company Profile. Relocation assistance negotiable.

Thom's Notes: I need a true Operations/Plant Manager with career that doesn't require a major step back for this opportunity.

Txt ID: J10041 to 406-210-1226

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Safety First!

Don’t Forget!

September 7th, 2012 #05158 Page #25

Adverti$er Estaciones de Lavado de Emergencia

You Saw it in the

Todos los años aparecen en el lugar de trabajo muchos productos químicos nuevos y, a pesar de una cuidada planificación y de las medidas de seguridad tomadas, se producen accidentes en los que las personas From State Fund CA. se ven expuestas a productos químicos nocivos. Debido al potencial de exposición, cada lugar de trabajo debe disponer de una lista de todas las sustancias peligrosas. Las Hojas de Datos sobre Seguridad de Materiales referentes a estas sustancias deben estar fácilmente disponibles y en ellas If you have an accident at work that involves your eyes, an emergency deben constar descripciones de las sustancias, incluida su ubicación, eyewash station can protect you from serious eye damage or the loss of riesgos, precauciones del fabricante y las medidas de tratamiento o your sight. When you work with corrosive, irritating, toxic, or tissue- antídoto en caso de producirse una exposición peligrosa a dicha sustancia. damaging materials in the workplace, it is important to have an emergency eyewash station immediately available.

El lugar de trabajo debe poseer estaciones de lavado de emergencia siempre que exista un riesgo razonable de que los trabajadores puedan Emergency eyewash stations can be plumbed into the wall or provided verse expuestos a productos químicos cáusticos o a otras sustancias as stand-alone stations with eyewash solution tanks or bottles. All peligrosas. Todos los trabajadores sometidos a este riesgo deben conocer eyewash stations should be reachable within 10 seconds from the areas la ubicación y propósito de las estaciones de lavado de emergencia y where a splash or eye contamination is likely to occur. Pathways to ser capacitados con regularidad acerca de su uso. Adviértase que las eyewash stations should be free of barriers such as locked or latched estaciones de lavado de emergencia no son sustitutivas de los equipos doors (swinging doors are allowed), equipment, material storage, or de protección personal, tales como anteojos, máscaras protectoras y poor housekeeping. ropa de seguridad.

Safety Meeting Topics

Emergency Eyewash Stations

All eyewashes should have annual inspections to ensure they are operating properly. Plumbed eyewash stations need clean bowls, dust covers for the nozzles, and good water pressure. Check eyewash bottles and tanks for expired solutions according to the manufacturer’s instructions.

All eyewash stations should be protected from freezing and provide room temperature to lukewarm flushing fluids. Activating handles should start the flow of fluids immediately.

Fluids should flow for at least 15 minutes, or, in the case of eyewash bottles, long enough to reach a plumbed eyewash station.

On a weekly basis, check plumbed eyewash stations to ensure that they are clean and working correctly. Use inspection check sheets for annual, periodic, and weekly inspections and keep copies of these records.

Algunos productos químicos reaccionan de una manera peligrosa cuando se mezclan con otra sustancia y pueden poner en peligro al usuario o a las personas a su alrededor. Se puede combatir la reacción si se dispone de duchas o estaciones de lavado de emergencia que proporcionen cantidades abundantes de agua que fluyan continuamente para eliminar el producto químico. No se recomienda el uso de agentes neutralizadores en los ojos ni en la piel. La combinación de ciertos productos químicos puede resultar peligrosa e incrementar los efectos perjudiciales de las quemaduras químicas o causar cicatrices en la piel si, accidentalmente, se utiliza un agente neutralizador inadecuado.

Lavarse de inmediato con abundante agua potable es la medida más efectiva que se puede tomar en primer lugar para el tratamiento de la contaminación química de los ojos o la piel. Esto, junto con la selección y colocación de duchas o estaciones de lavado de emergencia, son dos de las medidas cruciales que se pueden adoptar para responder eficazmente a una emergencia.

Los expertos médicos destacan la extrema importancia del acceso inmediato a una estación de lavado de emergencia. La probabilidad de lograr una recuperación total de las lesiones oculares es excelente si la víctima llega a una estación de lavado de los ojos en un plazo de 10 a 15 segundos. El pánico, el dolor y el oscurecimiento de la visión reducirán el tiempo de respuesta, por lo que es importante que las estaciones de emergencia se coloquen en lugares bien visibles.

While emergency eyewashes are important in the workplace, using safe work practices can prevent the need to use them. Learn about the chemicals and materials you work with by reading the Material Safety Data Sheets (MSDS) for information on hazards, precautions, and recommended personal protective equipment (PPE). If you are working with chemicals that can splash or materials that may fly into your eyes, wear safety glasses with side-shields or splash goggles. Know where La duración del lavado y la cantidad de agua utilizada en él resultan the emergency eyewash stations are located in your workplace and how fundamentales para el tratamiento con éxito de los ojos o la piel. La to use them. duración mínima del lavado de los ojos es de 15 minutos, aunque la mayoría de los expertos coincide en señalar que resulta más apropiado If your eyes are accidentally injured, immediately flush them with water hacerlo durante 20 a 30 minutos. Es importante regular atentamente la or eyewash solution for at least 15 minutes. If your eyewash station or presión del agua de la estación de lavado de los ojos, ya que el tejido bottles do not have enough fluid to run that long, use them temporarily ocular debilitado puede resultar dañado fácilmente. while you make your way to a plumbed station. When you start flushing your eye, hold your eyelids open and roll your eyeballs around to allow Se deben establecer, con la ayuda de profesionales médicos capacitados, the fluid to flow on all of the surfaces of the eye and under the eyelid. medidas de primeros auxilios para las lesiones químicas; éstas, al Seek medical attention as soon as possible after flushing your eye. igual que todas las precauciones de seguridad, deben ser revisadas y actualizadas con regularidad.

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

September 7th, 2012 #05158 Page #26

Don’t Forget!

You Saw it in the

Adverti$er

Used Equipment Wanted!

765-751-9990

Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329 www.wasserman-associates.com

Take Back Your Business Become More Competitive with:

  

Powerful Software High Quality Connector Plates Independent Established Supplier

All at a Great Price

For a software demonstration call 1-800-652-6050 www.keymark.com

Join the Southern Pine Partnership!

Since 1915

2012 BUILDING COMPONENT MANUFACTURERS CONFERENCE CEUs PDHs

ENG. WOOD

FIRE

HIRING

LEGISLATIVE

SBC ASSOCIATION

SBC MAG.

STEEL

TESTING

TPI

TRAINING

As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org LOGIN Home Menu didn't load. Click here or refresh to view.

For Attendees

JobLine.com

The

About New Orleans

JOIN SBCA

CONTACT US

SITE MAP

PRINT

QUESTIONS

Register Here: http://bcmcshow.com/

, inc.

Show Schedule & Events BCMC Build

800-289-JOBS(5627) BCMCs Past Join SBCA

BCMC History

Control Panel/Options

Time to Hire?

Contact Us HELP

Affordable

Recruiting & Testing

www.thejobline.com PHONE: 800-289-5627

Since 1992

Read/Subscribe online at www.componentadvertiser.com

2012 Building Component Manufacturers Conference © Menu | Legal

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

September 7th, 2012 #05158 Page #27

Don’t Forget!

You Saw it in the

Adverti$er

Business Listings

JobLine.com, inc.

The

800-289-JOBS

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com Wood Roof & Floor Trusses Wall Panels Engineered Components

CAD Design

Gould Design, Inc. Designing to your needs... A. One Gould project at -a time.

Christopher President

Time To Hire?

We’re here when you need help!

www.thejobline.com

Designing to your needs... One project at a time

Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards Industry Leading Professionals at your fingertips Overall design department cost reduced, saving you $$$ Experienced with multiple industry design software suites Up to date with US & Canadian Building Codes

(772) 475-3583 - Call Today

cgould@goulddesigninc.com | www.goulddesigninc.com

Your Ad Could be Here 2”x3” Single Card

$195 per YEAR! Sizes & Rates on-line

www.componentadvertiser.com

or call 800-289-5627 x 1

Mylon Stark

Professional Services Anywhere, Anytime Invest In Your People!

Here's a partial list of services BPS will provide to your operations:

• • • • • •

Improve Your Net Profit ! 

• •

Time Standards

(R.E., S.U. & Man-Minutes also known as Houlihan Method)

Proper Production Efficiencies, Pricing , Scheduling



Supervisor & Leadership Development Safety Integration Development of Safety Committees Developing Personal Responsibility for Operational Success Workplace Safety & Health Training for "Best Practice" Application OSHA and MSHA-related Training and Education Jobsite and Facility Audits and Inspections Incident Investigations

888.519.4130 toll-free

Lean Manufacturing Practices All Areas Are Covered 50% Shop - 50% Office Manufacturing, Design,

Admin Practices

Sales and

Tailored for Your Company



605.220.2342 mobile

info@bigpicturesafety.com www.bigpicturesafety.com

Truss Shop Labor Tracking Software Easy to use Software Track Your Labor Efficiencies and Labor Cost

Todd Drummond Consulting, LLC www.todd-drummond.com

todd@todd-drummond.com

Phone 603-763-8857

20 Years in Truss Industry - 9th Year in Consulting Service - 50+ Clients

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Your Ad Could be Here 2”x3” or 3”x2” Single Card

$195 per YEAR! 3”x4” Double Card

$295 per YEAR! Sizes & Rates on-line

www.componentadvertiser.com

or call 800-289-5627 x 1

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

September 7th, 2012 #05158 Page #28

Don’t Forget!

You Saw it in the

Reader Response Form FAX to: 800-524-4982

Adverti$er

Reader Response Sponsors

or email: info@componentadvertiser.com Name: ____________________________________________________ Company: ______________________________________________ Address: ______________________________________________ City:____________________________ State:______

Zip:______

Phone: _________________________ Fax: ______________________ Email: ____________________________________________________ How would you like to be contacted?

Phone

Fax Check All that Apply Email

Wood Truss 765-751-9990 Systems inc.

Combining the qualities and expertise you should expect from an industry supplier MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

Would you like to be a Reader Response Form Sponsor?

Call 800-289-5627 x 1 or Email info@componentadvertiser.com

List of Items you are interested in: List the Page # and Title of the item.

Page # Item Title ____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

Would you like to be added to our subscription list?

PHONE: 800-289-5627

Yes:

www.mii.com/MiTekAssurance

WWW.SPIDA.CO.NZ

No:

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

CSS Automated saw for fast, accurate production of timber components

The CSS automatically sets up for angles and lengths

The CSS will cut at least double the amount of a manual saw

Jobs are downloaded to the saw via LAN, Floppy or removable media

Set up left or right hand timber flow to meet your requirements

CSS PACKAGE INCLUDES:

10 ft (3 metre) roller infeed table

20ft (6 metre) outfeed automated bench table

CXM saw

Rockwell Automation

17 inch Industrial flat touch screen

Custom designed software

A: 31 ALLEN MILLS ROAD, ROTORUA, NEW ZEALAND 3010 P:+64 7 345 8088 F:+64 7 345 8087 W: WWW.SPIDA.CO.NZ