Issuu on Google+

#

153

PUBLISHED WEEKLY August 3rd 2012

COMPONENT MANUFACTURING dverti$er

#05153

A

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MANUFACTURED STRUCTURES INDUSTRY

Inside: NAHB: Federal Open Market Comittee.... Comittee page #3

BCMC 2012 page 3

Madisons Canadian Lumber Reporter: page 13

JobLine Hiring Zone: page 23-26

New Equipment Spotlight: page 24-26

Safety First Topics in English/Spanish: page 27

Business Directory: page 28-29 Reader Response Form page 30

FULL CATALOG PAGE 31-36


www.mii.com/MiTekAssurance

 Page 2


M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Published Weekly

Adverti$er

August 3rd, 2012 #05153 PAGE #3

NEWS from NAHB

Editor/Publisher Thomas McAnally tmcanally@componentadvertiser.com

Federal Open Market Committee Meeting Statement – Reading the Tea Leaves

Advertising Thomas McAnally Position available

August 1, 2012

Subscriptions Renae McAnally

Today’s statement following the July 31-August 1 meeting of the Federal Open Market Committee (FOMC) offered a couple of hints, but nothing definitive on the big question of further monetary policy easing.

Distributed FREE via e-mail subscription or on line at www.componentadvertiser.com

The language in today’s statement downgraded current economic growth compared to the statement following the June meeting, replacing “the economy has been expanding moderately this year” with “economic activity has decelerated somewhat over the first half of this year.” The statement also has heightened expectations of future further accommodation, possibly a QE3, by upgrading June’s declaration that the FOMC “is prepared to take further action as appropriate” with the more explicit “will closely monitor incoming information on economic and financial developments and will provide additional accommodation as needed.”

Download FREE and subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk

In the rest of the statement the FOMC reaffirmed the current stance of monetary policy, including keeping the Fed funds target rate in its 0 to 25 basis point range at least through late 2014, maintaining current portfolio management practices with regard to agency debt and MBS, as well as the maturity extension program (“Operation Twist”). The changes in the language in today’s statement are far from a commitment to additional monetary easing but do offer clues as to the shifting sentiments within the FOMC. The minutes, which provide a much more detailed account of the views of participants, are traditionally released three weeks after the meeting. Reqd more on line at: http://eyeonhousing.wordpress.com/

Copyright 2008-2009-2010 -2011-2012

Component Advertiser

Register Here:

PO Box 16685 Fernandina Beach, FL. 32035 NO REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION FROM THE COMPONENT ADVERTISER

eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above. Archive Copies Available On Line www.componentadvertiser.com

Member PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

en d in g

SAWS

Don’t Forget! YOU SAW IT IN THE

SAWS

Adverti$er

SAWS

August 3rd, 2012 #05153 PAGE #4

SAWS

ASI B500 5 Blade Component Saw

Five blade saw that includes PC and cabinet and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut Automated Length Stop & Automated is 14 inches and the shortest angle cut is 18 Saw Rotation as directed by Truss Design inches. The saw cutsfrom 2x4 through 2x12 Software. 10' Infeed & 20' Outfeed Roller lumber up to 20 feet in length. Angles are Conveyor with Stands. 5 HP Motor, set using digital readouts. Both the length 18" Blade. Dust Collector. Computer, and angle adjustments are power driven. Monitor & Keypad. Add $7,000 for New $19,000 FOB AL. Wood Truss Systems Mango Touch Screen Upgrade. $13,900.00 765-751-9990 FOB AB. NOW $11,900 www.woodtrusssystems.com Wasserman & Associates 800-382-0329 www.wasserman-associates.com

P

Used Apollo Saw with Mango Truss Automation

1999 Mitek Smart Set Pro Semi-Automated 5 Blade Component Saw • • • •

Semi-Automated Saw with Touchscreen Input 5 Blades cut up to 2x12 Material from 18" to 20' in Length 240 Volt / 3 Phase $14,900 FOB CA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2001 Omni Mini-Miser Saw -Auto Live Deck -Inkjet Print System D (Two Faces & One Edge) -Installation Available (quote upon request) $10,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #5

Don’t Forget! YOU SAW IT IN THE

Adverti$er To

PUBLIC

★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★

PUBLIC

Be co S m ee e a In Qu stru ali cti fie on d so Bi dd n P er ag on e 2 th eI nt er ne t

COMPLETE PLANT CLOSURE NEW 2005

(2) Busellato Model Jet 130 CNC Machining Centers

320,000 SQ. FT. STORE FIXTURE AND DISPLAY MANUFACTURER INCLUDING LATE MODEL WOODWORKING MACHINERY AND SUPPORT EQUIPMENT Featuring: (2) Busellato Jet 130 CNC Machining Centers (2006), (2) Shoda CNC Routers (1990’s), Holzma Optimat OPT.HPP380/38/38 CNC Panel Saw (2007), Giben CNC Panel Saw (1994), Gannomat 480 CNC Drilling, Gluing and Dowel Inserting Machine (2003), 52” Buffering AWS-2C-E-1350 Sander, Homag Optimat FLO23 Double End Tenoner, (5) Edge Banders By Holz-Her, Poly Mac and Homag, Altendorf F45 Sliding Table Saw, (5) Boring Machines, Table, Radial Arm and Panel Saws, Planers, Routers, Jointers, Sanders, Laminate Rollers, Drills, Nordfab NFK-6HW/2BL Central Dust Collector w/ Duct Work, (3) Air Compressors to 60 HP, Dryers, Vacuum Pumps, (500) Sections Pallet Rack w/ Decking, (10) Scissor Lift Tables, (2) Komatsu LP Lift Trucks to 9,000 Lb., (2) Crown Electric Lifts, Scissor Lift, Trailers, (6) Spray Booths, Stretch Wrappers, Metalworking Machinery, (300+) Lots Hand Tools, Large Quantity Late Model Office and Support Equipment

NEW 2007

3550 Symmes Rd. – Hamilton, Ohio 45015

Holzma Optimat Model OPT.HPP380/38/38 CNC Panel Saw

25 Miles North of Downtown Cincinnati, Ohio off I-75

Tuesday, August 21st, 2012 Starting at 9:00 AM INSPECTION: MONDAY, AUGUST 20TH FROM 10:00 AM TO 4:00 PM

LATE MODEL Overall View Rolling Stock Including (4) Lift Trucks to 9,000 LB and Scissor Lift

Nordfab Type NFK-6HW/2BL Bag Type Central Dust Collector

470 SECTIONS

LATE 1990’S

G O L A T A C 6 3 L L FU AGE 31 P e se

(470) Sections Wireway / Huskey 42” X 108” X 20’ Adjustable Beam Tear Drop Style Pallet Rack

Cincinnati Industrial Auctioneers Inc.

Myron Bowling Auctioneers Inc.

2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760 INTERNET: www.cia-auction.com

P.O. BOX 369 ROSS, OHIO 45061 PHONE (513) 738-3311 / FAX (513) 738-0221 INTERNET: www.myronbowling.com

PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Adverti$er

August 3rd, 2012 #05153 PAGE #6

SAWS e n ic io r t P uc ed R

2008 Spida Automated Truss Saw Automated Stop & Automated Saw Rotation as directed by Truss Design Software. Digital LCD Touch Screen Monitor. Clamping Roller Table. Two Bag 3 HP Dust Collector. $26,250 $18,500 $16,000 NOW $15,000 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 Alpine AutoMill RS Model 344V saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer. The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $16,900 FOB KY. Wood Truss Systems 765-751-9990

SAWS

SAWS

2002 Hain Quick Rafter Cutter

2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw

1996 Mitek Combi Set 4 Blade Web Saw

Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS NOW $20,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

-Waste & Incline Conveyor -Extra Set of Blades -220/440 Volt - 3 Phase $12,500 FOB MO Wasserman & Associates 800-382-0329 www.wasserman-associates.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

SAWS

2003 Delta 16" Radial Arm Saw Delta 33-411 16" Radial Arm Saw. Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22". Features "Turret Arm" construction which allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph power. $1,800 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Adverti$er

SAWS

R P ed r u ice ct io n

SAWS

August 3rd, 2012 #05153 PAGE #7

2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329

1987 Alpine Timber Mill 620 Pro Saw

1995 Auto Omni Component Saw

MD MH6C-20 / SN R0347 / 230 volts 3 phase / Saw Foot Print: 40’ overall (30’ Frame & 10’ Incline) x 7’-6” tall x 8’ wide /Bought new and used in small plant / See the operational video link. $8,500 FOB GA. Salter Associates 770-434-1006 www.salter.com

SO

LD

Re Pri du ce ct io n

2002 Alpine AutoMill RS 5 Blade Automated Component Saw including Live Deck

Automated via Download or SemiAutomated via Touch Screen Input 19 Axes of Automation. Cut 2x3 thru 2x12 from 13” to 20’. Label Printer. 5 Chain Live Deck. Extra Set of Blades. Waste & Incline Conveyor. Self Dumping Hopper. $40,000 NOW $35,000 FOB WA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2003 Alpine Speed Cut Metra-Cut Centerline Saw with Speed Measure Location: AZ Price: $5,500.00 -20' Speed Measure, Roller Conveyor & Stands -Turntable Air Brake Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1995 Auto Omni component saw, rebuilt in 2004. 5-blade automated saw includes shaker waste conveyor with factory side pans. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20' to 9" @ 90°/90°, spare blades

2005 Koskovich Auto Omni Component Saw Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical. Wood Truss Systems 765-751-9990

PHONE: 800-289-5627

Industrial 18" Up-Cut Saw -Model N-510R -2x12 Capacity Hinged Saw Guard -10 HP Saw Motor(230/460 Volt) -Add $400 for Heavy Duty 10' Infeed & Outfeed Roller Conveyor with Stands. $1,750 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Price-$19,000 FOB Denver CO. Contact: John Wood

303-249-7037

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

SAWS

August 3rd, 2012 #05153 PAGE #8

Don’t Forget! YOU SAW IT IN THE

SAWS

Adverti$er

JobLine.com

the

800-289-JOBS

Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $59,900 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Time To Hire? We’re here when you need help!

www.thejobline.com Omega Round Web Saw Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 765-751-9990

2006 TCT EZ Trimmer cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 765-751-9990

COMPONENT MANUFACTURING dverti$er

A

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

PHONE: 800-289-5627

2002 Alpine AutoMill RS Model 348A saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer. The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $19,900 FOB KY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

SAWS

SAWS

2006 Monet DeSauw PD-6 Power Deck Lumber Feed System

2007 Lauderdale Hamiltion Up-Cut Saw with Mango Plate Marker

-6 Chain Live Deck -16' Wide x 20' Long -Foot Pedal Control $6,750 FOB GA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

en d in g

Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900. Wood Truss Systems 765-751-9990

Lauderdale Hamilton 24” Super Chop Up-Cut Saw. Mango Plate Marker with Touch Screen Computer. 10’ Infeed & 20’ Outfeed Roller Conveyor with Stands. Dust Collection System. $14,900 FOB LA. NOW $12,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

P

2006 Alpine AutoMill SC 5 Blade Automated Saw

2002 Koskovich Auto Omni Component Saw

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

YOU SAW IT IN THE

SAWS

1998 TimberMill 4-14 Web Saw Location: CA, Price: NOW $9,900.00 -Cut 4x2 and 2x4 thru 2x8 Lumber from 11" to 14' -(4) 16" Blades powered by 5 HP Motors -Digital Readouts -Chain Waste & Incline Conveyor -240 Volt / 3 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 MiTek Cyber A/T Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor with Dell PC upgrade in enclosure for fully automated or manual part input, catcherside monitor, ink-jet marking system, belt scrap conveyor with incline. All powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode). 220v, 3ph power required. $56,900 FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

DePauw 5 Blade Floor Web Saw

LD

Location: TX, Price: $11,900.00 -Power Angulation & Carriage -Internal (1,2,3,4) Blades are mounted at 90 degrees from each other -External(5) Cut-Off Blade -Lengths up to 14' -Vibrating Waste Conveyor(No Incline Conveyor) -480 Volt / 3 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com

SO

2006 Monet DeSauw FWA 500 Floor Web Saw

(4) 16" Blades plus (1) 16" Cut Off Blade. 4x2 Lumber from 6" to 54". Push Button Powered Blade Angulation. Electronic Digital Readouts. Single Push Button Setting for 2 Blades per Side. Magazine Lumber Feed. Dust Collection Hoods. Vibrating Waste Conveyor. Incline Belt Waste Conveyor. 480 Volt/3 Phase. New price is approximately $50,000. $32,500 FOB ON. Wasserman & Associates 800-382-0329

PHONE: 800-289-5627

Adverti$er

TRUSS EQUIPMENT

TRUSS EQUIPMENT

R P ed r u ice ct io n

R P ed r u ice ct io n

SAWS

Don’t Forget!

August 3rd, 2012 #05153 PAGE #9

2002 Mitek RoofGlider 14' x 100' Side Eject Roller Gantry System Mitek RoofGlider 14' x 24" Diameter Roller Gantry (Trackless). (13) Slotted Top Tables with Pop-up Skatewheel Ejectors. Roof Truss Jig Hardware & Bridge Plates. Roller Gantry Park Sections. 6 Powered Rollers, 6 Idle Rollers & 6 Receivers. Mitek 14' x 24" Diameter Finish Roller. $42,500 FOB CA Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ For more WizardPDS® Information visit: http://eideintegratedsystems.com/ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Robbins No-Rail Gantry System

2005 Dimter OptiCut S700 Wood I-Joist Crosscut Saw Optimizes, labels and cuts wood I-beams. Features 66’ long infeed for up to 60’ long, wood I-beams with 42’ long outfeed. 90/90 cuts up to 14” depths x 3 ½” wide flanges. Runs in automated batch mode or manual mode. Includes windows-based touch screen controls, console, ink-jet printing option on cut boards and 20 HP motor. Saw is operational and available to demo, touch-screen is cracked and may require a replacement estimated at $5,000. Ink jet needs maintenance. 3 Ph power required. (Saw cost $300,000 new in 2005.) $109,900 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Price: $79,800 :: FOB IL Robbins Side-Eject 14' x 103' working length trackless gantry system. Includes (2) Robbins gantry heads, (1) 1995 Alpine model 725 finish roller press with 15' throat, (14) slotted, steel-top tables with skate-wheel ejectors and (optional) 24" aisles, (15) powered conveyor rolls, (16) idle rolls and (13) outside heavy duty roll. Each gantry head includes an AC inverter soft start control with 15 HP drive. System includes all available jigging hardware and aisle plates. 440v, 3phase. (snow in photos not available) Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 Koorsen Plate Detector Truss plate detector significantly reduces field repairs by indicating missing connection plates. Features adjustable height and missing plate alarm. Button controls on stand-alone console. +/- Footprint dimensions. 17’ x 3’ x 5’. Compatible with any type of truss roller. 110 volt, 1 phase electrical. $6,800 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 MiTek Tracked Gantry Head Price: $8,900 :: FOB TX 24" x 14' tracked gantry head with double push button pendant controls and operator platform. Fits 15'-1 1/2" rail centers. 208v, 3ph power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 Alpine Metra-Cut Saw with Speed Cut Express

COMPONENT MANUFACTURING dverti$er

A

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Location: CA, Price: $9,900.00 -Touch Screen PC & Cabinet -2 Axis of Servo Controlled Automation -240 Volt/3 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #10

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Wood Truss Systems

inc.

765-751-9990 www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1999 Gardner-Denver 30HP Compressor System 30 HP Gardner-Denver rotary screw air compressor with (newer) electronic control panel, model EBK99K. Rated 115 CFM. Also includes system dryer and 120 gallon air tank, recently dealer serviced. 460V, 3 phase power. $6,990 FOB IN

PA

2008 IBS Yard Barn Wall Panel Line

FO

B

-

$24,900 FOB MI

Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI

2004 Ruvo 925 Door Machine Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA

R P ed r u ice ct io n

2005 (4) Projector SL Laser System Four-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.

$31,300 :: FOB AZ Condition: Good

2005 Koskovich Auto Omni $52,900 FOB UT

NOW $49,900

FAX: 765-288-9991 PHONE: 800-289-5627

www.woodtrusssystems.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

PHONE: 765.751.9990 FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Adverti$er

800-382-0329

August 3rd, 2012 #05153 PAGE #11

TRUSS EQUIPMENT

www.wasserman-associates.com

2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta -32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase

Wood Truss Systems 765-751-9990

1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System 2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted). Slotted Top Tables with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers. Tee-Lok 14’ Finish Roller. Dismantled & Stored in Early 2011. Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™. $33,500 FOB SC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

TRUSS EQUIPMENT

inc.

MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

Hundegger SC-1 $310,000 NOW $250,000 FOB NY

Model SC 1 saw includes vertical finger mill with 5.5 kW router motor, 40mm end mill., 25.5" diameter blade, 12.3 HP, 1480 RPM saw motor, and REA 16 pin, single-head ink-jet print option. System includes Hundegger extended infeed deck with OEM automated clamping system which includes pressurized horizontal and vertical clamps that hold and straighten twisted, bowed, and curved lumber; outfeed framework: gripper wagon is mounted – rack and pinion system. Saw is a computer numeric controller (CNC) saw capable of cutting a wide range of roof, floor, and wall framing components, including I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam. The saw can also cut 2x dimensional lumber stacked up to four pieces deep. Hundegger's Whole House Saw quickly and efficiently processes all types of cuts and profiles used in house construction. Comes with operator console, flat screen monitor, and industrial keyboard, Hundegger computer loaded with Windows XP/built in LAN card, and electronics cabinet which is A/C climate-controlled. Complete with waste conveyor system and incline, The SC 1 is upgradeable by OEM. OEM maintenance program, tech support and expert installation available at additional cost. 480 volt, 3 phase power.

PHONE: 800-289-5627

1999 Tee-Lok 40' Floor Truss Machine 2002 MiTek Tee-Tracker Gantry System 14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

$18,800 FOB GA Wasserman & Associates 800-382-0329

2003 MiTek Railrider Floor Machine Model 82500-502, 24 inch diameter gantry head with riding platform and push-button controls. Machine builds floor-trusses to 42 foot working length (54 foot overall length) truss depth capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, plate storage along table edge. Includes all available hardware. 230 volt, 3 phase electrical. $39,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

TRUSS EQUIPMENT

Don’t Forget! YOU SAW IT IN THE

TRUSS EQUIPMENT

Adverti$er

August 3rd, 2012 #05153 PAGE #12

SA

alter & ssociates

Engineered Wood Products Industry

Klaisler 6-40 Traveling Floor Machine Tee-Lok Side-Eject 24" dia Gantry 165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware. System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 Pacific Automation Auto 8 Gantry System 8'x40' hydraulic press system specifically designed for smaller trusses. No finish press required, system includes single joystick control, operator platform and drilled / tapped, steel, table building surface. 50 ton press capacity. 230 Volt, 3 phase electrical. $10,990 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 MiTek TK-8 Clamp System MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 765-751-9990

04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform. 24 roll -10HP motor w/electric softstart. Item F1026 Truss Machinery Connections 800-580-6430

PHONE: 800-289-5627

2005 Koskovich Jet-Set 23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990

Truss Equipment Installation Consulting

770.434.1006 www.salter.com

2001 Alpine (100’) Floor Track Gantry System #2 2001 Alpine (100’) floor track 2001 Alpine (100’) floor track gantry gantry system / (1) system / (1) 7.5 HP 24” gantry head / Model 705 / SN 705A1007/ (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL S22,000

7.5 HP 24” gantry head / Model 705 / SN 705A1006 / (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase. FOB FL.

2001 Alpine (100’) Interior Exit Conveyor System

TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press

2001 Alpine (100’) interior (14’ x 6” diameter x 1” shaft) steel roller conveyor system / spaced 6’-0” on center / (9) powered rollers / (10) idle rollers (14) receiver arms for side “A” roof truss table and (14) receiver arms for side “B” roof truss table / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL

6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase . FOB GA $14,500

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Wood Truss Systems

Adverti$er

August 3rd, 2012 #05153 PAGE #13

765-751-9990 www.woodtrusssystems.com

inc.

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

2009 Stealth Trackless Gantry System (NY2)

$81,900 $60,000 NOW $49,900 FOB: NY

14' x 80' trackless side-eject gantry equipment with (10) all slotted-steel, continuoustop 6'-6" tables, (10) side ejectors. System features a 36" Stealth gantry roller, and (4) 14' transfer rollers, and with limited conveyor: (4) 14' inside pwr/idle conveyors, and (6) 14' outside conveyors. System was OEM refurbished in 2010, 460 volt, 3 phase power. OEM support and installation available.

Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

Further upward movement in most dimension lumber prices last week astounded both producers and customers. The sheer dearth of supply is responsible for strengthening prices at a very unusual time of year. A two-week pop in #3/Utility grades indicates the return of customers from Asia, specifically China. Panel products, not generally volatile as a rule, experienced gains after a couple of weeks of price softening. Douglas fir producers on the west coast celebrated as threats of further curtailments seem to have finally gotten through to customers. After losing some ground earlier in the summer, enough to frighten already skittish sawmills, green Douglas 2x4 #2&Btr rose $5 in the week to US$280 mfbm last week, an 11.5 per cent, or $32, increase over one month ago and a 10 per cent, or $28, improvement over the same month last year. Not to be left behind, widely-traded Douglas fir green 2x10 also strengthened, by $10 from the week before to US$300 mfbm. This is an 11.7 per cent, or $35, gain on last month but a $5 loss over the end of July 2011. Similarly, panel -- especially OSB in the central zone -- experienced only rising prices. Customer resistance to higher prices in early July proved fruitless as small dips have since been reversed. Benchmark Oriented Strand Board 7/16” Ontario jumped $7 to sell for C$252 msf last week, an 8.7 per cent, or $22, increase over one month ago, and a 20.7 per cent, or $52, improvement over the same time last year. The big winner in panel, however, was Canadian Softwood Plywood 3/8”, which ended the week at C$421 msf, a stunning 29 per cent, or $121, rise over July 2011. Even Madison’s didn’t expect the rally of lumber prices this spring to result in such a reversal of fortune. Given that sawmill order files are two weeks or longer, sometimes to the end of August, it is difficult to see prices dropping until after Labour Day. Some mills report a drop in customers, while others can’t keep up with the constant ordering. The conventional wisdom is that the combined Canada/US Labour Day long weekend is the last chance for home improvement or new deck building projects. As long as there isn’t significant rain, that weekend is ALWAYS a good one of the lumber industry.

R P ed r u ice ct io n

Dimension Lumber Key Prices

 $14,900

PHONE: 800-289-5627

For this week’s prices subscribe to Madison’s at www.madisonsreport.com

Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16 READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Last Week $298 $294 $308 $360 $355 $280 $300 $395 $252

Change +3 +3 -1 -1 +5 +5 +10 0 +7 FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

TRUSS EQUIPMENT

Don’t Forget! YOU SAW IT IN THE

Adverti$er

August 3rd, 2012 #05153 PAGE #14

TRUSS EQUIPMENT

800-382-0329

g

2003 Alpine RAM Easy Rider 14’ x 104’ Trackless Roller Gantry System

P

en

d

in

R P ed r u ice ct io n

Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990

2006 MiTek Infeed Deck 2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity. Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 765-751-9990

1997 Pacific Automation Auto-8 (40’) Truss Press -8' x 40' Drilled & Tapped Steel Table -50 Ton Hydraulic Press -24" x 96" Platen -Floor Truss Jig -Press 2x4 and 4x2 with no adjustment. $29,500 FOB ID. NOW $13,900 Wasserman & Associates 800-382-0329

R P ed r u ice ct io n

Design your own custom roof truss gantry!

1994 (50') Robbins Roof Truss Gantry MD Super Torque / 10 HP / 7 ea. (5’x14’) steel tables with 2x6 underlayment and 1” dense plastic top / Includes (4) ea. uni-strut channels per table /(1) ea. pop-up skate roller per table / (6) Receiver arms / No Exits rollers / 15 ea. 24’x16”x1’ bridge plates / (65’) floor track / 230 volts 3 phase. $15,000 FOB GA Salter Associates 770-434-1006 www.salter.com

-2003 Alpine RAM Easy Rider 14’ Roller Gantry (Trackless) -104’ of Steel Slotted Top Tables with Pop-up Skatewheel Ejectors -Roof Truss Jig Hardware Location: -Roller Gantry Park Sections -Center Powered/Idle Exiting Conveyor with Receivers -2002 Alpine 15’-6” x 24” Diameter Finish Roller -(20) 14’ Outfeed Gravity Rollers with Stands -240 Volt / 3 Phase

CA

WAS $69,900 NOW $59,900

Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

 PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

TRUSS EQUIPMENT

August 3rd, 2012 #05153 PAGE #15

Don’t Forget! YOU SAW IT IN THE

TRUSS EQUIPMENT

Adverti$er

Wood Truss Systems

inc.

765-751-9990 www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

R P ed r u ice ct io n Stealth Peak-Up Stackers (2) Two (2) Peak-Up, Four Receiver Stacker Systems with four (4) arms each. Features four (4) stacker horses (2 left and 2 right) for use with scissor trusses, HD Drive System, Auto Indexing and spring assisted receiver arms. Holds up to 30 trusses from 16’ to 60’ in length. Price is per stacker. $19,950 $19,950, 11,900, NOW $11,490 each FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2009 Stealth Trackless Gantry System with Auto Puck System

$125,000 $113,304 $89,000 $74,990

-Two 5 HP Motors -Conveyor Section: 6'-6" x 12-0" x 33 1/2" FOB AZ - $6,500.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1997 MiTek Tracked Gantry System (TN) Price: $32,900 NOW $25,900 :: FOB TN Condition: Good Category: Roof Truss Description: 86' x 14' side-eject gantry system with (11) plastic top tables with strut, with (1) model 6800 gantry roller, (+/- 75') interior conveyor and (+/- 75') exterior rollers. Includes all available system hardware and stand-alone receivers. Can be paired with the 2008 MiTek finish press for an additional $15,200. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FOB NY

R P ed r u ice ct io n

End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks. Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 765-751-9990

Tee-Lok 14' x 24" Diameter Finish Roller plus 4 Sections of Idle Conveyor

R P ed r u ice ct io n

2005 MiTek RailRider End Eject Floor Machine

14' x 58' Trackless Gantry, Side-eject system with auto jigging system in a continuious all steel slotted top configuration. Featuring (12) Automated puck systems with system computer and stand, (8) 6'-6" table sections, (8) ejectors and (3) 14' transfer rollers. Includes one (1) trackless Stealth 24" diameter gantry roller, side-ejects to transfer roller leading to (12) 14' inside pwr/idle conveyors and (13) 14' outside conveyors. System includes a large 16' capacity Integrated Stealth finish press. 460 volt, 3 phase. System was OEM refurbished in 2010, continuing support and installation available.

WALL PANEL EQUIPMENT

e n ic io r t P uc ed R

2001 Alpine Track Gantry Heads (Qty. 2 Only 1 left) Two (2) 24” diameter x 14’ throat, track gantry heads, 15’-0 ¾” rail centers, two available at this location. Price per each. 460 / 230 volt, 3 phase electrical. Price: $6,900 ea. :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

1996 MiTek Floor Truss Gantry System Price: $13,900 NOW $11,900 :: FOB TN Condition: Good Category: Floor Truss Description: Model 66100 gantry with 24" dia. roller, builds trusses from 14" to 24" deep and up to 40' in length. Includes dual safety bars, pendant control and all available system hardware. $13,900 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Panels Plus Manual Framer 16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 765-751-9990

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

WALL PANEL EQUIPMENT

PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker $22,500 FOB NE. NOW $17,900 Wasserman & Associates 800-382-0329

COMPONENT MANUFACTURING dverti$er

A

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

WALL PANEL EQUIPMENT

Don’t Forget! YOU SAW IT IN THE

WALL PANEL EQUIPMENT

Adverti$er WALL PANEL EQUIPMENT

August 3rd, 2012 #05153 PAGE #16

WALL PANEL EQUIPMENT

2005 Panels Plus Framing Table Reconditioned Panels Plus 10' x 20' Squaring Table -Squaring Stops & Roller Conveyor -Motorized Telescoping Arms (for wall height adjustments) -No Rail or Track on Floor Increases Operator Safety and Simplifies Clean-up -Excludes Router or Panel Bridge $10,900 FOB NE Wasserman & Associates 800-382-0329

Panels Plus manual wall framer builds walls to 16’ length and from 8’ to 12' in height. Includes 3-gun tool dollies each side, stud locaters, pop-up skate-wheel transfer, and motorized telescoping arms for adjusting wall height. Table also includes subcomponent layout tables and skate-wheel transition conveyor. (120v, 1ph, 100 psi air supply). Table is a trackless design for easy install. $15,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

e n ic io r t P uc ed R 2004 Virtek LaserMC Wall Panel Cutting & Marking System -Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output -Vista Angle Boss Cut-Off Saw -20' Capacity -Left to Right Material Flow -Environmental Computer Enclosure with Computer/Monitor -Laser is burning light -Used for 2 years Location: KS, Price: $27,900.00 NOW $25,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

2012 MiTek Wall Panel Framing Light Bars In use for only four weeks. 16 foot long, enclosed set with console, stand, cables and pc. Used to indicate wall panel start point and sub-component locations when used with a framing table. Light bars are crated for shipment. Spare card, controller and plexi-glas cover included. Framer shown in pictures not included. 110 volt, single phase electrical. Price: $23,500 :: FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2007 Panels Plus Sub-Component Nailer 2002 Mango Automated Wall Extruder OEM Reconditioned Price: $39,900 $28,500 :: FOB TN Auto feed wall framer. It has a 16’auto conveyor on each side of the incoming feed system (out feed conveyors are not included). The Mango Automated Wall Extruder is operated using data downloaded from virtually any wall design software in the office. The wall extruder is a fast, safe and efficient way to automate your existing manual wall equipment. The system accurately sets the plate positions in front of the nail guns to ensure that the studs are in the correct position. The studs (or other features that are being assembled) can be placed anywhere, not just on fixed centers. The standard machine is designed to allow for 2 nails in each end of the stud 3 nails for 2x6 wall. Plate sizes can be 2x4 or 2x6 material without need for manual adjustment for nail position or number of nails. Features include: Minimum wall height = 6’8”, Maximum wall height = 12’0, Minimum wall length = 1’0”, Maximum wall length = 16’ . 2 x nail guns required, Able to fire 3.5” stick nails, or coil-feed nails, to suit nail reels, Power: USA / Canada 110 Vac 6 Amp, Air: 100 psi / 8cfm (Machine is disassembled and ready for shipping) Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Maximum Opening: 17" x 17 1/2". On/ Off Switches for Each Nail Gun. Button to Activate Squaring Stop, Foot Pedal to Activate Clamping, Excludes Nail Guns $7,500 FOB LA Wasserman & Associates 800-382-0329

2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies $10,900.00 FOB TN Wasserman & Associates 800-382-0329

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer

Basic Automation 12' x 16' Interior/Exterior Wall Panel Line

2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge, Includes (25) Senco Staple Guns. $14,900 NOW $13,400 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

PHONE: 800-289-5627

Don’t Forget! YOU SAW IT IN THE

Adverti$er

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

August 3rd, 2012 #05153 PAGE #17

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

Wood Truss Systems

Don’t Forget! YOU SAW IT IN THE

Adverti$er

TRUCKS

&

TRAILERS

August 3rd, 2012 #05153 PAGE #18

TRUCKS

&

TRAILERS

inc.

MANUFACTURERS’ REPRESENTATIVES

765-751-9990

Combining the qualities and expertise you should expect from an industry supplier

2005 Viking ADT Wall Panel Framing System $37,990 FOB TX

2001 Ford F-250 With Rolloff Trailer Price: $18,900 FOB IN Condition: As Is, Where Is

Viking framing station with PreStage table and conveyors. Framing station model PS-Special, includes stud locators (16” & 24” centers), skate wheel ejectors, walk-through aisles, ½ HP motor and two (2) powered tool carriages. Discharge speed of 12” per second. Once staged the framing sequence is event driven: guns fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4’-2”’ to 12’0” high, in lengths up to 20’ long. Includes two (2) 4’x 8’ plastic top setup tables, (1) set of 5’ wide x 10’ long skate wheel conveyors and (1) set of exit conveyors 24’ long. System supported, and installation available from the OEM (Sold new for $132,000). 480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Guns not included.

2001 Ford F-250, standard cab with Triton V-10 gas engine, 140,000 miles, includes a Tri-Star rolloff, dual-axle trailer with a gooseneck mount, mechanical ‘landing-gear”, GVW: 14000#. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Your Ad Could be Here

1997 ASI 48-72' Stretch Trailer

NEED HELP WITH YOUR PANELS PLUS EQUIMENT?

Price: $16,900 :: FOB TN Condition: Good Category: Trailers and Rolling Stock Description: ASI model 5AM stretch trailer from 48 to 72 feet, features sliding tandem axles, electric roll-off controls, fifth wheel connection and hydraulic lift. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

We offer:

Disassembly & packaging of equipment. Installation by trained personnel. Adjustment and calibration of equipment. Training for operators and maintenance workers. Recommend upgrade options. Assistance in getting your fastening tools mounted and operational.

Contact Information: email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus

PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

2007 Mitsubishi FD70 Forklift FD70 forklift weighs 23,500 lbs., featuring an OEM maximum lift capacity of 15,500 lbs., with a maximum lift height of 196 in. (16 ft. 4 in.). Features a 90 HP diesel motor powering two (2) wheels, two (2) forward gears, two (2) reverse gears, driver’s cab, and extended forks (tines) for handling wood components. $38,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

YOU SAW IT IN THE

TRUCKS & TRAILERS

Adverti$er

TRUCKS

&

TRAILERS

TRUCKS

&

TRAILERS

R P ed r u ice ct io n

TRUCKS & TRAILERS

Don’t Forget!

August 3rd, 2012 #05153 PAGE #19

1994 Wabash T-30 Trailer 48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 765-751-9990

2008 Precision 42-60' Stretch Roll-Off Trailer (4001c) Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1999 Western Star Truck with National 990 Crane Model 4964F Truck with 20’-6” Flatbed. 475 HP CAT Engine. 8 Speed Manual Transmission. 215,885 Miles, National Model 990 Crane, Crane Capacity: 46,000 Lbs. 90’ Boom with Jib Option. $74,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1996 Lakeside 42'-60' Stretch Roll-Off Trailer Location: NY Price: $7,500.00 -Sliding Tandems -Hydraulic Neck Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Price Reduction

2000 Raglan Trailer 48’ 48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 765-751-9990

1997 Haulin 48' Roll-Off Trailer -Sliding Tandems -Hydraulic Neck -DOT is Current FOB IN, $5,900.00 Wasserman & Associates 800-382-0329 www.wassermanassociates.com

01 Haulin (Stretch 48 -70 )

2004 Pratt 48' Roll-Off Trailer -Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com

$8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust. Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430

1989 Western Star Boom Truck & Trailer Combo Price: $89,990 :: FOB WA Model 4964F boom truck, NTC 365 Cummins diesel engine, 18-speed transmission installed in 2008 (has only 5,000 miles on it), 1994 National Crane model 600C, 81 foot crane, recently refurbished at a cost of $10,000, 447,000 miles. 54,000 lb. GVWR. Includes one (1) custom built, peak-up truss trailer, with three axles, stake pockets, 1/4" thick steel wheel fenders, moveable light bars. Trailer can be purchased separately for $11,990. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

2005 Pratt 36'-50' Stretch Roll-Off Trailer Sliding Tandems, Hydraulic Neck. $17,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2000 Teledyne D50 Forklift Terex Teledyne D50 straight mast forklift with 5,500 lb. capacity, 120" lift height and diesel power to (3) all-wheel drive. $8,996 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

1999 Sterling Tractor 1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982


M ACdverti$er OMPONENT

TRUCKS

&

ANUFACTURING

TRAILERS

August 3rd, 2012 #05153 PAGE #20

Don’t Forget! YOU SAW IT IN THE

MISC.

Adverti$er

Wood Truss Systems inc.

765-751-9990 www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1997 PCS Hercules Auto-Feeder

1995 Wabash 36'-50' Stretch Roll-Off Trailer -Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires $9,900.00 FOB CO. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

MISC.

1999 Holz-Her Accura "S" 14' Beam Saw Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329

2001 Klaisler Rolsplicer The industry's best floor truss chord splicer, splices both 2 X 4 and 2 X 6, splices in vertical orientation and forces lumber together (compression) prior to plate pressing, single operator easily trained to accomplish accurate, reliable splices. Includes dual recessed simultaneous activation buttons, guarded motors and sprockets, 3 HP motor, 10 foot infeed and 20 foot outfeed conveyors. 460v, 3 phase. (Open listing to view OEM video). Price: $6,800 :: FOB IL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Refurbished 2005 Hain 20Ft. Measuring System 2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

$4,499 FOB SC Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed. 460V, 3ph. MISC.

MISC.

Like New Altman Model 122 Dustless Sheetrock Saw Call for Price. FOB NE. Wasserman & Associates 800-382-0329

Ruvo 2200 Stair Saw Price: $26,667 :: FOB FL Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

1999 Sullair LS-10 Compressor with SR Dryer 25 hp Sullair rotary screw air compressor, model LS-10. Rated 111 CFM @ 100 PSI. Also includes Sullair SR-175 dryer. The compressor is 230/460V and the dryer is 230V, 1 phase power. $8,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Murphy-Rodgers MRT-9A Dust Collector -Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

$990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #21

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Wood Truss Systems

765-751-9990

inc.

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Price Reduction

800-382-0329

Combining the qualities and expertise you should expect from an industry supplier

2006 Omni Miser Automated Material Picking System $89,000 FOB SD

-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000! Option to Omni Miser Picking System. -The standard NEW

2005 Williams Pulverizer

WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!

Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.

$8,000 FOB TN

Click for WoodRunner Details: http://apexmw.com/ MISC.

MISC.

MISC.

MISC.

2006 Allison Material Carts Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 765-751-9990

2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 MiTek Lumber Splicer MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen. Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 765-751-9990

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Lumber/Teeter Carts -20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

YOU SAW IT IN THE

MISC.

P

HP Hydraulic System. 3" x 12" Maximum Plate Size (2x4 Material). Magnetic Platens for Plate Placement. Pneumatic Lumber Clamps. Foot Pedal Control for Clamping, Dual Push Button Control for Pressing. $4,750 FOB WY Wasserman & Associates 800-382-0329

Door & Stair Equipment

MMC 5-Arm Infeed Deck

in d

en

Mitek Lumber Splicer

Adverti$er MISC.

g

MISC.

Don’t Forget!

August 3rd, 2012 #05153 PAGE #22

Roller Table (16' x 5' x 32") -Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Wood Truss Systems

Handles lumber from 4’ to 20’ and features 5 rails/pedestals, foot pedal controls, safety-guarded drive chain, heavy-duty steel I-beam and tubing construction and adjustable swivel base feet. Foot print +/14 x 20’. Price: $5,500 $4,500 :: FOB TN Wood Truss Systems 765-751-9990

Door & Stair Equipment

inc.

Used Builders Automation Model 2210 Staircase Assembly Clamp Location: NE, Price: $5,900.00 Up to 20’ Stringers with Maximum Width of 54”. Pneumatic Clamping (2 CFM at 110 PSI). 9 Side Clamps Wasserman & Associates 800-382-0329 www.wasserman-associates.com

R P ed r u ice ct io n

MANUFACTURERS’ REPRESENTATIVES

Norfield Vertical Door Loader

Ruvo 2200 Stair Saw

26" Wide x 24" Deep x 66" High with 6" Legs. Polycarbonate Window. WeldedIn 12" Deep Keyboard Shelf. Three Point Locking System. Fan for Hot Air Evacuation. 2 Adjustable Shelves in Lower Cabinet. $950 FOB NE Wasserman & Associates 800-382-0329

$22,677 FOB FL AS NEW

2007 MiTek Ready Feed Live Deck Auto-Feed live deck for component saw. 14' wide x 20'-6", 5 rails, safety-guarded sprockets, HD I-beam construction, footpedal control and adjustable height. Easily shipped and installed. 230V, 3 phase power. $7,500 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

Norfield 1020 Double-End Trim Saw Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 765-751-9990

R P ed r u ice ct io n

NEW Strong Hold Topview Computer Cabinet

Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.

2,800 Lb Capacity. 48" Stack Height 480 Volt / 3 Phase. $9,500 FOB TX Wasserman & Associates 800-382-0329

Full House Double End Trimmer

765-751-9990 www.woodtrusssystems.com

Cut Casing, Jambs, Door Stop & Brickmold. $5,850 NOW $5,000 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Triad/RUVO Model 928 PreHung Door Machine with Triad/RUVO Model 1275 Door Assembly Table Location: NY Price: $28,800.00 NOW $25,000 -Excludes Bostitch Staple Guns Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 Hain Vent Block Drill -Handles block sizes ranging from 2x4 through 2x12 -Drills 1,2,3 or 4 holes at a time -220/440 Volt, 3 Phase, 5 HP Motor Location: CA Price: $4,000.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #23

Don’t Forget! YOU SAW IT IN THE

Adverti$er

new equipment showcase

Hiring Zone

JobLine.com, inc.

The

Automated Jigging System

800-289-JOBS

AUTOMATE YOUR ROOF TRUSS LINE WITHOUT MOVING A TABLE

Time To Hire? We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Technical Outside Sales AUTOMATE

SETUP TRUSS PROFILE IN 60 SECONDS OR LESS

RETROFIT ANY ROOF TRUSS TABLE; WOOD, PLASTIC OR STEEL MINIMIZE DOWNTIME, ONSITE INSTALLATION SAVES THOUSANDS OF DOLLARS AS OPPOSED TO OTHER RETROFIT SYSTEMS

THE LEAST EXPENSIVE DUAL PUCK RAIL SYSTEM ON THE MARKET, GIVES YOU A COMPETITIVE EDGE

To learn MORE about MangoTech Automated Jigging visit us at www.MangoTech.com.au Contact us at Sales@MangoTech.com.au or 866-GO-MANGO

IMMEDIATE!

Entry Level to Intermediate Truss Designer(s) Optimizers & Cutting/Production Documents Jobs in

TEXAS NOW!

send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com

STRICTLY CONFIDENTIAL! PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

California NOW!

Agressive - Experienced with MiTek Software Sales/Layout Estimating Roof & Floor Truss Focus on High End Custom Homes & Multifamily

send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com STRICTLY CONFIDENTIAL!

M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #24

Don’t Forget! YOU SAW IT IN THE

Hiring Zone

Adverti$er

new equipment showcase

JobLine.com, inc.

The

800-289-JOBS

Introducing the:

Purlin Plunger

SET TRUSSES FASTER WITH PREDRILLED PURLINS x

x

x

x

Time To Hire? We’re here when you need help! visit: www.thejobline.com

Pre-Drill & Mark Only 2-3 Hammer Blows (60d Nails) Purlins Reduce Field Labor by 25-30% Set Trusses Faster & More Accurate Reduce the Exposure to Jobsite Fall Hazards Pre-Drilled & Marked Purlins (Shown)

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Florida! Designer/Senior Designer Truss (multiple jobs) Location: Florida Details: Opportunity for a Senior Designer with 3-5+ years of experience in wood truss design. The ideal candidate will have Alpine Software experience. Please inquire for additional information. Txt ID: J10487 to 406-210-1226

Priority: Immediate Search Designer/Estimator Truss/Lumber Location: Texas Designer/Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package estimating experience is a plus. Projects include commercial/ multifamily. Compensation $45-55k (relocation assistance negotiable) Txt ID: J10493 to 406-210-1226

Visit us at www.SQ-1Design.com

Specifications and Gallery x

Multi head, (3) 1/2HP industrial-duty drill head design allows for pre-drilling purlins from 4’up to 20’ in length with 5.6 sec. cycle time

x

Drill heads feature “quick stop” clamping for fast drill head location movement

x

Drill bit detection provides warning to operator in the event of drill bit failure

x

Features shaft driven infeed/outfeed material handling chain conveyor. Belt conveyor transfers drilled purlin to outfeed deck with auto-eject feature

x

Vertical and horizontal air clamping results in consistent and accurate hole placement

x

Touch screen PLC controls create user friendly operator interface for both manual and automatic operation

x

Automatic operation features material detection devices resulting in activating indexing of all sequences and transfer to outfeed material deck.

x

1ph. 230V power

Clamping

PLC Touch Screen Control

Drill Bit Sensor

Centerline Marking

Outfeed Deck

Outfeed Belt Conveyor

Outfeed Ejectors

Drill Head Adjustment

Sean Hubbard 317-440-2804 Sean@SQ-1Design.com Fax 320-210-4237

Jay Bunyard 317-354-5438 Jay@SQ-1Design.com Fax 320-210-4237

Catch us on

thejobline.com PHONE: 800-289-5627

Scan our QR code to view our latest video http://www.youtube.com/watch?v=78A3uIJGj4U

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #25

Don’t Forget!

Adverti$er

YOU SAW IT IN THE

new equipment showcase

On the Cutting Edge... New! Porta Field Press

New! Roll Splicer

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Phone: 530.295.8068

Fax: 530.295.0468

Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672

Features: • • • • • • • •

Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area

Call 770-434-1006 For Details Salter & Associates www.salter.com

We go to any lengths to expand your opportunity. PHONE: 800-289-5627

Features: • • • • • • • •

Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place

Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com

You find the opportunity -- we’ll build you the products to meet it. Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

An

Company

866.726.7587 or www.panplus.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

Hiring Zone

August 3rd, 2012 #05153 PAGE #26

Don’t Forget! YOU SAW IT IN THE

Adverti$er

new equipment showcase

JobLine.com, inc.

The

800-289-JOBS

800-382-0329 email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

NEW Monet DeSauw Wood Finger Jointing Line

@JobLine Business Development Manager Laminated Beams Location: South (Carolinas centered) Work with the Sales manager to determine commercial business potential in the South and surrounding states. Build relationships with contractors, architects, designers, and business owners in the commercial industry using Glulam products; responds to RFQs, sources take offs & shop drawings, prepare quote proposals & letters, estimates freight, generates bid documents, completes internal files, and manages orders & shipments for awarded bid. Txt ID: J10485 to 406-210-1226

Design Manager/PE CET, AScT PE, CET, AScT Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities.. The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family. Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region. Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here. Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program. Canadian CET or AScT, or Degreed Architectural or Civil Engineer preferred. Detailed job description is available. Txt ID: 10486 to 406-210-1226

PHONE: 800-289-5627

Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada. Advantages: -Reduce Waste -Positive Ecological Impact -Produce Straight Material

$79,900 FOB MO

www.wasserman-associates.com Immediate Search Estimator - Truss/Lumber Location: Texas Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package design experience is a plus. Projects include commercial, multifamily, government, and industrial. Compensation $45-55k (minimal relocation assistance possible) Txt ID: J10498 to 406-210-1226

Priority: Immediate Search Outside Sales - Truss/Panel Location: DC/Metro Looking for an Outside Sales rep in the DC/Metro market and surrounding areas who can bring $3-4M+ to the table. Floor Truss, Roof Truss, Wall Panels and EWP. This highly successful manufacturer has multiple plants and can easily handle all you can sell. Excellent reputation for quality, competitive pricing and on time delivery. Manufactures Roof & Floor Trusses, Wall Panels and EWP. Compensation: $70k-+, 6 figures possible Thom's Notes: One of my top 5 employers. Great benefits and outstanding advancement potential. Txt ID: J10496 to 406-210-1226

Hiring Zone

Priority: Immediate Search Designer/Senior Designer Truss/Panel/I-Joist/EWP Location: Edmonton, Canada

Priority: Immediate Search Production Manager - Truss/ Panel Location: Midwest

This is a Job in EDMONTON CANADA

Direct production of wall components, roof and floor trusses and floor systems for custom, single family homes. Plant produces 175+- homes a year. reporting to this position are 8-15 production workers. Responsibilities include production, scheduling, costing and purchasing 5-10+ years components experience required. Will consider move up if qualified.

I am looking for a high energy designer who is willing to learn and apply all aspects of truss, panel, I-Joist, and EWP design. Experience required: 5+ years in component design plus JobLine skills evaluation above average. Primary duties include design, layout, optimization, and cutting/ production documents. Secondary duties include customer service. Skills required include MiTek software, AutoCAD, will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, framing components, I-joists, EWP, hardware. Compensation: Salary from $45-75 CN depending upon experience and performance. Relocation is open to negotiation. Thom's Notes: If you are a US Citizen, the employer will also consider your application. NO DEGREE REQUIRED! Txt ID: J10497 to 406-210-1226

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Compensation: $45-60k base salary, plus bonus potential when profits return. Vehicle w/expenses provided. Average 45-50 hours per week in peak season. Company benefits package, bonus program, vacation plan, and 401k program are detailed in our Company Profile. Relocation assistance negotiable. Thom's Notes: I need a true Operations/Plant Manager with career that doesn't require a major step back for this opportunity. Txt ID: J10041 to 406-210-1226

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Safety First! Safety Meeting Topics

August 3rd, 2012 #05153 PAGE #27

Adverti$er Lesiones por atoramiento o aplastamiento

Cada año, los trabajadores sufren aproximadamente 125,000 lesiones por atoramientos o aplastamientos que ocurren cuando las partes del cuerpo quedan atrapadas entre dos objetos o se atoran en la maquinaria. Estos peligros también se conocen como “puntos de pellizco”. Las fuerzas físicas que se aplican a las Each year, workers suffer approximately 125,000 caught or crushed by injuries partes del cuerpo atrapadas en un punto de pellizco pueden variar y causar that occur when body parts get caught between two objects or entangled with lesiones que van de moretones, cortadas y cabelleras arrancadas hasta partes machinery. These hazards are also referred to as “pinch points.” The physical del cuerpo destrozadas y amputadas, e incluso la muerte. forces applied to a body part caught in a pinch point can vary and cause injuries ranging from bruises, cuts, and scalping to mangled and amputated body parts, Los trabajadores en el campo, la industria y entornos de oficina se ven afectados por los peligros de atoramiento o aplastamiento hasta cierto grado. Obtenga and even death. instrucción y aprenda sobre los peligros de atoramiento o aplastamiento y los Workers in field, industrial, and office settings are all affected by caught or crush puntos de pellizco específicos de sus tareas, herramientas y equipo para que hazards to some degree. Get training and learn about the caught/crush hazards pueda tomar medidas de precaución. and pinch points specific to your tasks, tools, and equipment so you can take Vista la ropa adecuada para el trabajo con pantalones y mangas que no estén precautions. demasiado largas ni holgadas. Las camisas deben estar metidas en el pantalón. Evite usar joyas holgadas y colgantes. Amarre el cabello Dress appropriately for work with largo y meta las trenzas o colas de caballo detrás de usted pants and sleeves that are not too long o dentro de la ropa. Use los guantes adecuados y que le or too loose. Shirts should be fitted or queden bien para su trabajo. tucked in. Avoid wearing loose and dangling jewelry. Tie back long hair Busque posibles puntos de pellizco antes de comenzar una and tuck braids and ponytails behind tarea. Dedique el tiempo a planear sus acciones y decida los you or into your clothing. Wear the pasos que son necesarios para trabajar con seguridad. Preste appropriate, well-fitting gloves for toda su atención al trabajo. No bromee, sueñe despierto your job. ni trate de hacer varias cosas a la vez; la mayoría de los accidentes ocurren cuando los trabajadores están distraídos. Look for possible pinch points before Lea y siga todas las señales de advertencia colocadas en you start a task. Take the time to plan el equipo. Si aprecia todo lo que pueden hacer sus manos, out your actions and decide on the PIENSE antes de colocarlas en un lugar peligroso. necessary steps to work safely. Give your work your full attention. Don’t La maquinaria puede presentar un peligro con sus partes joke around, daydream, or try to multimóviles, las bandas transportadoras, los rodillos y los task on the job – most accidents occur ejes rotativos. NUNCA meta la mano en una máquina en when workers are distracted. Read movimiento. Mantenga adecuadamente y siempre use los and follow warning signs posted on protectores de la máquina y las herramientas provistos equipment. If you value all that your con su equipo; funcionan como barreras entre las partes hands can do, THINK before you put en movimiento y su cuerpo. No meta la mano alrededor, them in a hazardous spot. debajo ni a través de un protector y siempre reporte a su Machinery can pose a hazard with moving parts, conveyors, rollers and rotating supervisor las barreras que desaparezcan o se quiebren. Apague el equipo y shafts. NEVER reach into a moving machine. Properly maintain and always use use los procedimientos de trabado y etiquetado antes de ajustar, despejar un the machine and tool guards provided with your equipment; they act as barriers atascamiento, reparar o realizar el mantenimiento de la máquina . between the moving parts and your body. Don’t reach around, under or through a guard and always r eport missing or broken barriers to your supervisor. Turn Los peligros de atoramiento o aplastamiento no se limitan a la maquinaria. Los equipment off and use lockout/tagout procedures before adjusting, clearing a vehículos, las puertas eléctricas y los montacargas pueden presentar un peligro de aplastamiento a menos que estén bloqueados y etiquetados. Nunca coloque jam, repairing, or servicing a machine. su cuerpo debajo o entre equipo energizado a menos que se le haya quitado Caught/crush hazards are not limited to machinery. Vehicles, powered doors, completamente la energía. Las puertas, los cajones de los archiveros y las cajas and forklifts can pose a crush hazard unless they have been blocked or tagged grandes pueden pellizcar los dedos de las manos y de los pies. Tenga cuidado al out. Never place your body under or between powered equipment unless it is colocar los dedos en algún lugar. Pruebe el peso antes de levantar, transportar y de-energized. Doors, file drawers, and heavy crates can pinch fingers and toes. colocar cajas; una carga difícil o pesada puede resbalarse y pellizcar las manos Take care where you place your fingers. Test the weight before lifting, carrying, o los pies. Consiga ayuda o use las herramientas para mover artículos grandes and placing boxes; an awkward or heavy load can slip and pinch your hands or y/o pesados. feet. Get help or use tools to move large and/or heavy items. Si alguna vez se ha golpeado un dedo en una puerta, ya conoce el dolor que causa If you have ever slammed your finger in a door, you can appreciate the pain este tipo común de lesión por atoramiento o aplastamiento. Dedique tiempo a associated with this common type of caught/crush injury. Take the time to learn aprender sobre los peligros de atoramiento o aplastamiento que hay en el lugar about the caught/crush hazards in your workplace so you don’t learn about the de trabajo para que no tenga que aprender las consecuencias por experiencia. consequences first hand.

From State Fund CA.

Caught or Crushed Injuries

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #28

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Used Equipment Wanted!

765-751-9990

Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329 www.wasserman-associates.com

Take Back Your Business Become More Competitive with:

x x x

Powerful Software High Quality Connector Plates Independent Established Supplier

All at a Great Price

For a software demonstration call 1-800-652-6050 www.keymark.com

Join the Southern Pine Partnership! Since 1915

As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org

JobLine.com

The

, inc.

800-289-JOBS(5627)

Time to Hire? Affordable

Recruiting & Testing www.thejobline.com PHONE: 800-289-5627

This Space is Available Call 800-289-5627 x1 or email

info@componentadvertiser.com

Since 1992 READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #29

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Business Listings

JobLine.com, inc.

The

800-289-JOBS Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com Wood Roof & Floor Trusses Wall Panels Engineered Components Gould Design, Inc. Christopher A. Gould - President

CAD Design

Time To Hire? We’re here when you need help!

www.thejobline.com

DESIGNING TO YOUR NEEDS... ONE PROJECT AT A TIME Mylon Stark

Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards

Your Ad Could be Here

Industry Leading Professionals at your fingertips

2”x3” Single Card

Overall design department cost reduced, saving you $$$

$195 per YEAR!

Experienced with multiple industry design software suites

Sizes & Rates on-line

Up to date with US & Canadian Building Codes

www.componentadvertiser.com

(772) 475-3583 - Call Today

or call 800-289-5627 x 1

cgould@goulddesigninc.com | www.goulddesigninc.com

Professional Services Anywhere, Anytime Invest In Your People! Here's a partial list of services BPS will provide to your operations:

• • • • • •

Improve Your Net Profit ! ; Time

• •

Standards

(R.E., S.U. & Man-Minutes also known as Houlihan Method)

Proper Production Efficiencies, Pricing , Scheduling

Supervisor & Leadership Development Safety Integration Development of Safety Committees Developing Personal Responsibility for Operational Success Workplace Safety & Health Training for "Best Practice" Application OSHA and MSHA-related Training and Education Jobsite and Facility Audits and Inspections Incident Investigations

888.519.4130 toll-free

; Lean Manufacturing Practices iAll Areas Are Covered Ö50% Shop - 50% Office ÖManufacturing, Design, Sales and Admin Practices iTailored for Your Company

; Truss

Shop Labor Tracking Software

iEasy to use Software iTrack Your Labor Efficiencies and Labor Cost

Todd Drummond Consulting, LLC Phone 603-763-8857

20 Years in Truss Industry - 9th Year in Consulting Service - 50+ Clients

PHONE: 800-289-5627

Your Ad Could be Here 2”x3” or 3”x2” Single Card

$195 per YEAR! 3”x4” Double Card

$295 per YEAR! Sizes & Rates on-line

www.todd-drummond.com todd@todd-drummond.com

605.220.2342 mobile

info@bigpicturesafety.com www.bigpicturesafety.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

www.componentadvertiser.com

or call 800-289-5627 x 1 FAX: 800-524-4982


M ACdverti$er OMPONENT

ANUFACTURING

August 3rd, 2012 #05153 PAGE #30

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Reader Response Form FAX to: 800-524-4982

Reader Response Sponsors

or email: info@componentadvertiser.com Name: ____________________________________________________ Company:

______________________________________________

Address:

______________________________________________

City:____________________________ State:______

Zip:______

Phone: _________________________ Fax: ______________________ Email: ____________________________________________________ How would you like to be contacted? Phone Fax Check All that Apply Email

Would you like to be a Reader Response Form Sponsor?

Call 800-289-5627 x 1 or Email info@componentadvertiser.com

List of Items you are interested in: List the Page # and Title of the item. PAGE # ITEM TITLE ____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

Would you like to be added to our subscription list?

PHONE: 800-289-5627

Yes:

www.mii.com/MiTekAssurance

WWW.SPIDA.CO.NZ

No:

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982


To

PUBLIC

★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★

PUBLIC

Be co S m ee e a In Qu stru ali ct fie ion d so Bi dd n P er ag on e 2 th eI

nt er ne t

COMPLETE PLANT CLOSURE NEW 2005

(2) Busellato Model Jet 130 CNC Machining Centers

320,000 SQ. FT. STORE FIXTURE AND DISPLAY MANUFACTURER INCLUDING LATE MODEL WOODWORKING MACHINERY AND SUPPORT EQUIPMENT Featuring: (2) Busellato Jet 130 CNC Machining Centers (2006), (2) Shoda CNC Routers (1990’s), Holzma Optimat OPT.HPP380/38/38 CNC Panel Saw (2007), Giben CNC Panel Saw (1994), Gannomat 480 CNC Drilling, Gluing and Dowel Inserting Machine (2003), 52” Buffering AWS-2C-E-1350 Sander, Homag Optimat FLO23 Double End Tenoner, (5) Edge Banders By Holz-Her, Poly Mac and Homag, Altendorf F45 Sliding Table Saw, (5) Boring Machines, Table, Radial Arm and Panel Saws, Planers, Routers, Jointers, Sanders, Laminate Rollers, Drills, Nordfab NFK-6HW/2BL Central Dust Collector w/ Duct Work, (3) Air Compressors to 60 HP, Dryers, Vacuum Pumps, (500) Sections Pallet Rack w/ Decking, (10) Scissor Lift Tables, (2) Komatsu LP Lift Trucks to 9,000 Lb., (2) Crown Electric Lifts, Scissor Lift, Trailers, (6) Spray Booths, Stretch Wrappers, Metalworking Machinery, (300+) Lots Hand Tools, Large Quantity Late Model Office and Support Equipment

NEW 2007

3550 Symmes Rd. – Hamilton, Ohio 45015

Holzma Optimat Model OPT.HPP380/38/38 CNC Panel Saw

25 Miles North of Downtown Cincinnati, Ohio off I-75

Tuesday, August 21st, 2012 Starting at 9:00 AM INSPECTION: MONDAY, AUGUST 20TH FROM 10:00 AM TO 4:00 PM

LATE MODEL

470 SECTIONS

LATE 1990’S

Overall View Rolling Stock Including (4) Lift Trucks to 9,000 LB and Scissor Lift

Nordfab Type NFK-6HW/2BL Bag Type Central Dust Collector

(470) Sections Wireway / Huskey 42” X 108” X 20’ Adjustable Beam Tear Drop Style Pallet Rack

Cincinnati Industrial Auctioneers Inc.

Myron Bowling Auctioneers Inc.

2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760 INTERNET: www.cia-auction.com

P.O. BOX 369 ROSS, OHIO 45061 PHONE (513) 738-3311 / FAX (513) 738-0221 INTERNET: www.myronbowling.com


HAMILTON FIXTURE COMPANY / HAMILTON, OHIO 45015 NEW 2005

(2) Busellato Model Jet 130 CNC Machining Centers

NEW 2005 (2) Busellato Model Jet 130 CNC Machining Centers

Shoda Model NC-516P.2132 Single-Head Two-Table CNC Router

CNC MACHINING CENTERS

CNC PANEL SAWS

(2) Busellato Model Jet 130 CNC Machining Centers; S/N 6068, S/N 6053, Busellato Model EVE0800220 PC Control, Working Ranges: 120” X-Axis, 53” Y-Axis, 3.94” Z-Axis, Max Travel Ranges: 137” X-Axis, 66.5” Y-Axis, 8.1” Z-Axis, 3.94” Max Panel Thickness, (6) 49.2” Multi-Functional Flexible Vacuum Tables, HSK F63 Spindle, 18,000 RPM Spindle, 15-Pos ATC, 12 HP Spindle Motor (New 2005) SEE PHOTO

Holzma Optimat Model OPT.HPP380/38/38 CNC Panel Saw; S/N 0240-15-3780, Holzma PC CNC Power Control, 13.5 KW Motor, 150” Max Cut Length, 160” Rolling Feed Table, (7) Hydraulic Clamps, (3) Front Float Tables (New 2007) SEE PHOTO Giben Model Prisma 1SPT G Drive Rear Loading CNC Panel Saw; S/N 503.94.380, PC Control, 21 KW Motor, 12’ Max Cut Length, 9’ Rear Loading Roller Table, 15” Dia Saw Blade, (7) Hydraulic Clamps, (4) Front Float Tables, 6-Drive Microprocessor (New 1994) SEE PHOTO

CNC ROUTERS Shoda Model NCW163-3250 Single-Head Two-Table CNC Router; S/N 940401, Fanuc Series 15-M Control, (2) 61” X 126” Vacuum Shuttle Tables, 42 KW, (5) 12 KW Routers, (4) 3-Spindle Piggyback Routers, BT-35 Taper Spindle (New 1994) SEE PHOTO Shoda Model NC-516P.2132 Single-Head Two-Table CNC Router; S/N 910204, Fanuc Series 15-M CNC Control, (2) 63” X 102” Vacuum Tables, (2) 10 HP Vacuum Motors, (4) 12 KW Routers, (4) Piggyback Routers, Spindle Speed 3,000-18,000 RPM, 82.7” XAxis, 102.3” Y-Axis, 9.8” Z-Axis (New 1991) SEE PHOTO

Shoda Model NCW163-3250 Single-Head Two-Table CNC Router

12% ONSITE BUYERS PREMIUM 15% ONLINE BUYERS PREMIUM

WEBCAST BIDDER INSTRUCTIONS ➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale Date, if you do not you will not be approved. ➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000 Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period. ➢ Only Major Items Will be Available for Online Bidding. Please refer to the Listing on www.bidspotter.com for Available Online Items.

➢ There is a 15% Buyer’s Premium in Effect for All Online Purchases. ➢ We Highly Recommend that Potential Buyers Attend this Auction & Bid Live Onsite. This will give you the Ability to Inspect the Items & Fully Appreciate Their Condition, Along with Saving You 3% of the Buyer’s Premium.

Homag Model Optimat FLO23 Double End Tenoner

Nordfab Type NFK-6HW/2BL Bag Type Central Dust Collector

No Last Minute Registrations will be accepted. Make Sure to Register & Post Your Deposit No Later than 48Hours Prior to the Start of the Auction.


SALE DATE: TUESDAY, AUGUST 21ST, 2012 STARTING AT 9:00 AM

NEW 2007 Holzma Optimat Model OPT.HPP380/38/38 CNC Panel Saw

WIDE BELT SANDER AND DUST COLLECTOR 52” Wide Buffering Type AWS-2C-E-1350 Dual Head Wide Belt Sander; S/N 3369606 18.5 KW (New 1994) SEE PHOTO Nordfab Bag Type Dust Collector; Dual Compartment (6) Discharge Canisters, 20 HP Blower Unit SEE PHOTO

DOUBLE END TENONER Homag Model Optimat FLO23 Double End Tenoner; S/N 0.203.08.1639, 7.48” Min Working Width, 102” Max Working Width, 35.6” Work Height, Spindle Speed 6,000 RPM (New 1994) SEE PHOTO

CNC DRILLING, GLUING AND DOWEL INSERTING MACHINE Gannomat Model 480 CNC Drilling, Gluing and Dowel Inserting Machine; S/N 207389, PC Control, (8) Pneumatic Clamps, Spindle Speed 8,000 RPM, 1,250 MM Max Work Length, 900 MM Working Height, 50 MM Max Drill Depth, 515 MM Dowel Length Outside of Panel, 6-12 MM Dowel Diameter, 25-60 MM Dowel Length, SEE PHOTO .75 KW (New 2003)

EDGE BANDERS Holz-Her Model Triathlon 300 Edge Bander; S/N 4136, Holz-Her Controls, 13 MM Max Edge Band Thickness, 70 MM Max Adjustable Width X 525 MM Hold Down Belt, Granular Glue System (New 1998) SEE PHOTO ➢ Doucet Model BT-36 Power Roller Conveyor Homag Model KLO75/QA/20 Edge Bander; S/N 0-200-08-1313, Homag Control, 20 MM Max Edge Band Thickness, 60 MM Max Workpiece Thickness, 130 MM Max Adjustable Width X 610 MM Length Hold Down Belt, Quick Melt Glue System (New 1993) SEE PHOTO

Homag Model KLO74/QA/20 Edge Bander; S/N 0-200-08-1741, Homag Control, 20 MM Max Edge Band Thickness, 80 MM Max Adjustable Width X 550 MM Length Hold Down Belt, Quick Melt Glue System (New 1994) Polymac Model Single Contour and Straight Edge Bander; S/N 91130, Foot Pedal, Hot Melt Glue Application System, 60 MM Max Thickness, 20 MM Minimum Radius (New 2007) Polymac Model Single 89-N Contour and Straight Edge Bander; S/N 91130, Foot Pedal, Hot Melt Glue Application System, 12-62 MM Edge Banding Height, 26” Dia Coil Table SEE PHOTO

EDGE FINISHERS AND RELATED (3) Edge Finisher Corp Model EF-2000 Edge Finishers; S/N 059014, S/N 078913, S/N N/A, 2 HP, Spindle Speed 24,000 RPM, 8-40 MM Thickness SEE PHOTO Polymac Model Speedy 90 Trimming Machine; S/N PL-L-640-S, 40” X 25” Table (New 1994)

52” Wide Buffering Type AWS-2C-E-1350 Dual Head Wide Belt Sander and Nordfab Bag Type Dust Collector

NEW 2003 Gannomat Model 480 CNC Drilling, Gluing and Dowel Inserting Machine

DUST COLLECTION SYSTEM Nordfab Type NFK-6HW/2BL Bag Type Central Dust Collector; S/N 3604601, 45,000 CFM Capacity, 288 Filter Bags, 5,172 Sq. Ft. Total Filter Area, 8.7 to 1 Air to Cloth Ratio, Filter Dimensions: 28’ Length, 10’ X 6” Width, 22’ Height, (1) Airlock Type NRS-10 Central Discharge Unit, (3) Fire Dampers, Spark Detection, (2) Bruning & Federle 100 HP Blower Units SEE PHOTO ➢ Approximately 500’ of 14” Diameter Piping in Plant to Service Woodworking Machines; Also Other Piping Material From 14” Main Runs to Individual Machines

Holz-Her Model Triathlon 300 Edge Bander

NEW 2007 (3) Edge Finisher Corp Model EF-2000 Edge Finishers

Polymac Model Single Contour and Straight Edge Bander

Homag Model KLO75/QA/20 Edge Bander


HAMILTON FIXTURE COMPANY / HAMILTON, OHIO 45015

Giben Model Prisma 1SPT G Drive Rear Loading CNC Panel Saw 14” Altendorf Model F45 Sliding Table Saw

BORING MACHINES SCMI Model Top 35 Automatic Multi-Spindle Boring Machine; S/N AL3/000860, (35) Spindles, (3) Pneumatic Clamps, 60” X 20” Table, 2.4 HP, Spindle Speed 2,800 RPM, 60 MM Max Panel Thickness, 75 MM Max Boring Depth, Foot Pedal SEE PHOTO SCMI Model MB63 20-Head Horizontal Boring Machine; S/N AN-004317 Dodds Model MB6001 Automatic Mortising and Boring Machine; S/N MB98027-651 Ayen Type SKB-50 12-Spindle Boring Machine; S/N 8611992 Tumac 8-Spindle Horizontal Boring Machine; S/N N/A

MISCELLANEOUS WOODWORKING EQUIPMENT 20” SCMI Model S520 Heavy Duty Planer; S/N AB78376, 1/8” 9-3/4” Working Height, 10” Min Length Stock, 9 HP SEE PHOTO 30” CR Onsrud Inc Model 3025 Inverted Router; S/N 30014, 36” X 24” Table, Foot Pedals SCMI Model R9 Single Spindle Router; S/N N/A, 36” Throat Delta Model RS15 Single Spindle Shaper; S/N 2403, 43” X 16” Table, Spindle Speeds 2,80010,000 RPM, Foot Pedal (2) Tee-Sert Model HFM-BM14 Bench Type Hardware Insertion Machines; S/N 941448, S/N 941054, 16” Throat, Vibrating Bowl Feeders 6” Powermatic Model LV150 Edge Sander; S/N 8779074, (2) 33” X 12” Adjustable Height Tables

SCMI Model Top 35 Automatic Multi-Spindle Boring Machine

66” Mar-Bel Model PR66 Compression Roll; S/N 9914, (2) 6” Dia Rollers 60” Wide Mar-Bel Model PR6-61 Lamination Roller Press; S/N 9568 16” Delta Model RJ-42 Joiner; S/N 1471, 103” X 16” Table, 5 HP, 1” Max Depth (2) 24” Delta Ram Type Radial Drills; 30” X 22” T-Slotted Tables 15” Delta Model VS6 Variable Speed Drill; S/N 90I71504, 59” X 18” Table 12” Powermatic Model 1150A Press Drill; S/N 90155044 Mar-Bel Model DLS-36 Laminate Slitter; S/N 4180, 36” Throat, 36” X 48” Throat

SAWS – WOOD ALL TYPES 14” Altendorf Model F45 Sliding Table Saw; S/N 94-10-196, 126” Carriage Travel, 126” X 64” L-Shaped Slider 3200 Sliding Table, 10” Scoring Blade, Blade Guard, 200 MM Max Cutting Height SEE PHOTO 16” Northfield Model No. 4 Tilting Arbor Table Saw; S/N 931310-3, 33” X 43” Table, Europa 340 Material Puller, Arbor Speed 3,600 RPM, Rip Fence (3) 10” Delta Unisaw Tilting Arbor Saws; S/N N/A, 36” X 27” Table, Unifence Saw Guide (2) 10” Powermatic Tilting Arbor Saws; S/N N/A, 38” X 28” Table, Unifence Saw Guide 10” DeWalt Model 3525 Radial Arm Saw; S/N 653802, 168” X 40” Table

10” Delta Model 10 Deluxe Radial Arm Saw; S/N 90E29447, 48” X 18” Table, Automatic Brake 24” Meber Model SR600 Vertical Band Saw; S/N N/A, 23” X 27” Table SEE PHOTO 36” Meber Model SR900 Vertical Band Saw; S/N N/A, 32” X 38” Table SEE PHOTO 14” Delta Vertical Band Saw; S/N 93F95868, 14” X 14” Table Park Panel Saw; S/N N/A, 12’ X 11’ T-Table, 126” Travel, (4) Pneumatic Clamps, Pendant Control

24” Meber Model SR600 Vertical Band Saw & 36” Meber Model SR900 Vertical Band Saw

20” SCMI Model S520 Heavy Duty Planer

SAWS – METAL CUTTING 15” Sampson Model DG79.15 Adjustable Double Miter Saw; S/N 90267, 8’ Max Distance Between Saws, 22” X 120” Roller Feed Table SEE PHOTO 12” X 20” WF Wells Horizontal Band Saw; S/N N/A

STRETCH WRAP AND PACKAGING MACHINES Infra Pak Model Eagle Pallet Stretch Wrap Machine; S/N 84567T, 48” Vertical Travel, 50” X 50” Platform, Wrap Counter Lantech Rotary Pallet Stretch Wrap Machine; S/N N/A, 48” Vertical Travel, 60” Diameter Platform, Variable Speed on Turntable and Roll Carriage Signode Model Sure-Tyer SemiAutomatic Plastic Strapping Machine; S/N B4159, Foot Pedal 3M Automatic Case Sealing Machine

15” Sampson Model DG79.15 Adjustable Double Miter Saw

LARGE QUANTITY RAW MATERIAL, FINISHED GOODS AND IN PROCESS INVENTORY

LATE MODEL WOODWORKING MACHINERY

Large Store Display and Fixture Finished Product, Raw Material and Work-In-Process Inventory Consisting of; Raw Pressboard Wood Sheets, Laminate Material, Glass, Lexan, Lighting Components, Various Style Finished Displays Including Shelves, Display Cases, Component Parts and Related, See website for Detailed Photos


SALE DATE: TUESDAY, AUGUST 21ST, 2012 STARTING AT 9:00 AM 470 SECTIONS

LATE 1990’S

40 HP Gardner-Denver Model ECHQHG Rotary Screw Skid Mounted Cabinet Enclosed Air Compressor

(470) Sections Wireway / Huskey 42” X 108” X 20’ Adjustable Beam Tear Drop Style Pallet Rack

LIFT TRUCKS AND OTHER ROLLING STOCK 9,000 LB Komatsu Model FG45ST-7 LP Gas Cushion Tire Lift Truck; S/N 100870A, 3-Stage Mast, 218” Lift Height, Side Shift, Approx. 5,979 Hours 5,000 LB Komatsu Model FG300SGH LP Gas Cushion Tire Lift Truck; S/N 490808A, 3-Stage Mast, 183” Lift Height, Side Shift (2) 3,000 Lb. Crown Model 35SCTT Electric 3-Wheel Type Sit Down Type Lift Trucks; S/N 1A127294, S/N N/A, (1) Unit has 6-Stage Mast, Each Unit w/ 36 Volt Chargers Grove Model SM3248F Electric Self Traveling Scissor Lift; S/N 250738, 25’ Max Height, Built-In Charger 40’ Fruehauf Tandem Axle/Sliding Axel Storage Trailer, Aluminum Box; VIN N/A (2) 1973 Gindy 45’ Tandem Axle/Sliding Axle Storage Trailers; VIN 140421E, VIN 108772

AIR COMPRESSORS AND RELATED 60 HP Sullair Model 12B-60H-ACAC Skid Mounted Air Compressor; S/N 003-63826 50 HP Kaeser Model BS61 Rotary Screw Cabinet Enclosed Air Compressor; S/N 5101154, Approx. 15,300 Loaded Hours SEE PHOTO 40 HP Gardner-Denver Model ECHQHG Rotary Screw Skid Mounted Cabinet Enclosed Air Compressor; S/N M56997, Approx. 77,600 Hours SEE PHOTO (2) Sullair Model RSV516-50A-AC Rotary Vacuum Pumps; S/N 003-V84453, S/N 003-V84452 SEE PHOTO Gardner-Denver Model RNC250A4C2 Air Dryer; S/N GD250A4600405037 Ultra-Air Model UA200AC Air Dryer; S/N U-03982

Kaeser Model KRD250 Air Dryer; S/N 0361-2T-9508-95K 250 Gal Vertical Air Receiver Tank

PALLET RACK AND MATERIAL HANDLING (470) Sections Wireway / Huskey 42” X 108” X 20’ Adjustable Beam Tear Drop Style Pallet Rack; 4-1/2” Wide Step Beams w/ Wire Decking (New Late 1990’s) SEE PHOTO (35) Sections Wireway / Huskey 42” X 108” X 15’ and 10’ Adjustable Beam Tear Drop Style Pallet Rack; 4-1/2” Step Beams w/ Wire Decking (75) 42” X 53” Wire Decking Panels (11) Electric/Hydraulic Scissor Lift Tables; (4) 4,000 Lb. American w/ 48” X 96” Platform, (3) 6,000 Lb. American w/ 48” X 96” Platform, (4) 4,000 Lb. Mueller w/ 48” X 72” Platform 5,000 Lb Winslow Floor Type Platform Scale; GSE350 Digital Read Out, 48” X 48” Platform (9) Sections Various Size Cantilever Rack to 20’ H and 54” Arm

SPRAY BOOTHS AND RELATED (3) 16’ X 7’ X 10’ Modular Bolt Together Galvanized Rear Draft Spray Booths 12’ X 7’ X 10’ Modular Bolt Together Galvanized Rear Draft Spray Booth 12’ X 7’ X 8’ Modular Bolt Together Galvanized Rear Draft Spray Booth 8’ X 6’ X 10’ Modular Bolt Together Galvanized Rear Draft Spray Booth Paint Related Equipment Consisting of; (1) 10 Gal. and (4) 2 Gal Paint Pots, (2) Kremlin Pneumatic Paint Mixers, Guns, Fireproof Cabinets and Other Related Items

WOODWORKING HAND TOOLS Large Quantity Woodworking Hand Tools Consisting Of; Approx.

Large Quantity Late Model Office Furniture

(200) Senco and Bostitch Pneumatic Staplers, Approx. (50) Ingersoll Rand Pneumatic Drills, Pneumatic Impact Wrenches and Chisels, Milwaukee and Makita Electric Drills, Porter Cable Electric Routers, Porter Cable Electric Belt Sanders, Cordless Drills by DeWalt and Makita, DeWalt and Makita Electric Bench Type Mitre Saws, Enco and Dayton Bench Grinders, Approx. (400) Woodworking Clamps of All Kinds, C-Clamps, Other Tools Including: Pliers, Wrenches, Nut Drivers, Sockets and Many Other Related Items

50 HP Kaeser Model BS61 Rotary Screw Cabinet Enclosed Air Compressor

SHOP EQUIPMENT Large Quantity Late Model Shop Equipment to Service an Approx. 300,000 Sq. Ft. Facility Consisting Of; 12” Dia Manufacturer Unknown Disc Sander, (12) Self Dumping Hoppers, Floor Type and Pedestal Type Fans, (30) Hydraulic Pallet Trucks by JET, Crown, EP Lift, Bishamon and Others, Aluminum Frame Cable Type Die Lifts, Portable Shop Ladders, Fiberglass Step and Extension Ladders, 2-Wheel Hand Trucks, Kmaack Portable Job Boxes, (10) Cincinnati Model 1Z863B Barrel Type Dust Collectors, (15) Steel and Plastic Banding Sets, Safety Cabinets, (3) Acetylene Outfits, Approx. (150) Portable Shop Carts of Various Sizes and Construction Styles, Steel Cabinets, Steel Shelving, Stainless Steel Metro Carts and Racks and Many Other Related Items

(2) Sullair Model RSV516-50A-AC Rotary Vacuum Pumps

OFFICE FURNITURE Large Quantity Late Model Office Furniture Including; (42) 8’ X 7’ Steelcase Office Cubicles in Various Configurations, 22’ X 10’ Steelcase Office Cubicle, Free-Standing Steelcase Modular Desk Sets, Meridian Contemporary Wood Executive Desks, (2) 10’ Conference Tables w/ Chairs, Credenza, Tables, Couch, Hon & Anderson Hickey File Cabinets, Lateral File Cabinets, Book Shelves, Cabinets, Metro Racks, Lunchroom Tables & Chairs

(6) Modular Bolt Together Galvanized Spray Booths To 16’ X 7’ X10’

(11) Electric/Hydraulic Scissor Lift Tables To 6,000 LB Capacity

Large Quantity Late Model Shop Equipment


PUBLIC

★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★

Cincinnati Industrial Auctioneers Inc. 2020 DUNLAP STREET CINCINNATI, OHIO 45214

PUBLIC

Myron Bowling Auctioneers Inc. P.O. BOX 369 ROSS, OHIO 45061

PRE-SORT FIRST CLASS U.S. POSTAGE

PAID CINCINNATI, OHIO PERMIT NO. 3593

COMPLETE PLANT CLOSURE

FIRST CLASS MAIL!

320,000 SQ. FT. STORE FIXTURE AND DISPLAY MANUFACTURER INCLUDING LATE MODEL WOODWORKING MACHINERY AND SUPPORT EQUIPMENT

Complete Plant Closure

(2) (2) Busellato Busellato CNC CNC Machining Machining Centers Centers (2005) (2005)

3550 Symmes Rd. – Hamilton, Ohio 45015 25 Miles North of Downtown Cincinnati, Ohio off I-75

TUESDAY, AUGUST 21ST, 2012 STARTING AT 9:00 AM INSPECTION: Monday, August 20th From 10:00 AM – 4:00 PM

Holzma Holzma CNC CNC Panel Panel Saw Saw (2007) (2007)

Important Mail TO BE DIRECTED NEW TO THE ATTENTION OF EXECUTIVE PERSONNEL 1984

(500) Sections Pallet Rack

PUBLIC

★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★ ★★★★★★★★★★

3550 Symmes Rd. Hamilton, Ohio 45015 25 Miles North of Downtown Cincinnati, Ohio off I-75

PUBLIC

COMPLETE PLANT CLOSURE

TERMS OF SALE

DIRECTIONS

All equipment described herein will be sold “as is”, “where is” to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactory arrangements are made, a 25% deposit in cash, certified or cashier’s check payable to Cincinnati Industrial Auctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless a signed exemption form is presented at the time of purchase. All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders must comply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website. 12% buyer’s premium in effect for this sale.

From I-75 North of Cincinnati exit at Rt. 129 West (Exit No. 24) Proceed West on Rt. 129 Approximately 7 Miles to Rt. 4 By-Pass (Exit No. 18), at ramp go left onto Rt. 4 By-Pass and Proceed South approximately 3 miles to Symmes Rd, turn Right. Sale site on immediate right, watch for auction signs and parking.

IMPORTANT NOTICE:

AUCTIONEERS

Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure.

Cincinnati Industrial Auctioneers, Inc. – License No. 63-1983-10439 Jeffrey L. Luggen – License No. 57-1983-33789 Jerome A. Luggen – License No. 62-1983-33799 Myron Bowling Auctioneers, Inc. – License No.63-1985-14949 Myron C. Bowling – License No. 62-1976-20939

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

12% ONSITE BUYERS PREMIUM 15% ONLINE BUYERS PREMIUM

Cincinnati Industrial Auctioneers Inc.

Myron Bowling Auctioneers Inc.

2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760 INTERNET: www.cia-auction.com

P.O. BOX 369 ROSS, OHIO 45061 PHONE (513) 738-3311 / FAX (513) 738-0221 INTERNET: www.myronbowling.com


CSS Automated saw for fast, accurate production of timber components

ƒ

The CSS automatically sets up for angles and lengths

ƒ

The CSS will cut at least double the amount of a manual saw

ƒ

Jobs are downloaded to the saw via LAN, Floppy or removable media

ƒ

Set up left or right hand timber flow to meet your requirements

CSS PACKAGE INCLUDES: ƒ

10 ft (3 metre) roller infeed table

ƒ

20ft (6 metre) outfeed automated bench table

ƒ

CXM saw

ƒ

Rockwell Automation

ƒ

17 inch Industrial flat touch screen

ƒ

Custom designed software

A: 31 ALLEN MILLS ROAD, ROTORUA, NEW ZEALAND 3010 P:+64 7 345 8088 F:+64 7 345 8087 W: WWW.SPIDA.CO.NZ


August 3rd Advertiser