June 1st Advertiser

A #

145

PUBLISHED WEEKLY June 1st 2012 #05145

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Manufactured Structures Industry

Inside:

ProSales Online: Dealers Weigh In on Roofing Product Demand.. page #3

BCMC 2012 page 3

Madisons Canadian Lumber Reporter: page 12

JobLine Hiring Zone: page 22-26

New Equipment Spotlight: page 23-26

Safety First Topics in English/Spanish: page 27

Business Directory: page 28-29

Reader Response Form page 30

www.mii.com/MiTekAssurance

8 Page 2

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #3

Don’t Forget!

You Saw it in the

Adverti$er

Dealers Weigh In on Roofing Product Demand

Published Weekly Editor/Publisher

Thomas McAnally tmcanally@componentadvertiser.com

Heavy 4Q 2011 and 1Q 2012 buying puts manufacturers in the hot seat and many Midwestern dealers on hold

Advertising

Todd Doperalski Thomas McAnally

By Hallie Busta May 29th, 2012

Subscriptions

Following a season of heavy storms in areas of the Midwest and the rollout of manufacturer price increases nationwide, many dealers reported current or anticipated difficulties in securing product in quantities large enough, and in the required time frame, to meet customer demand.

Renae McAnally

Distributed FREE

Joe Corah, commodities division manager at Do it Best Corp., said that many member locations placed heavy orders in the fourth quarter of 2011 and the first quarter of 2012 fearing that a replay of last summer’s allocation periods would leave them with insufficient inventories to meet another round of storm-centric demand. This year’s story adds another dimension with the industry-wide announcement that shingle prices would rise during the first quarter to keep up with increases in raw material costs, along with a general uptick in residential remodeling that Corah says is seeing more consumers replace their roofs.

via e-mail subscription or on line at www.componentadvertiser.com

Download FREE and

subscribe by e-mail at www.componentadvertiser.com

The result: increased ship times and limited product availability, particularly in the Midwest, where some dealers don’t expect the product availability to normalize until late summer.

News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources

Roofing Supply Group, No. 7 on this year’s ProSales 100, is keeping its customers updated on the price increases through its website, which links to releases sent by seven roofing products manufacturers detailing their respective price increases and start-dates, which range from 5% to 10% and have been implemented as early as March 1 and as late and June 1. The roofing products manufacturers that ProSales reached out to were not available for comment.

Industry Articles are the property of their creator unless otherwise noted

Disclaimer: We reserve the right to refuse PatCONFERENCE Jennings, Roofing Supply Group’s Midwest district manager, also notes that the compound 2012 BUILDING COMPONENT MANUFACTURERS any advertisement or material that we deem demand is affecting Midwestern dealers. “It stretched us,” he said. “It was beg and borrow to CEUs ENG. AdSBC not in the interest of the industry or the try manufacturers did find SBC ways to get product TESTING into the market.”

He said that FIRE to fill orders.

HIRING The LEGISLATIVE STEEL TPI TRAINING PDHs WOOD ASSOCIATION MAG. vertiser. The Advertiser is provided “As Is” roofing product demand doubled from a year ago in the areas hit by storms. including typographical errors, omissions, Despite consecutive, damaging storm seasons, Mike Wuerdeman, a buyer at Springfield, and mistakes both intentional and unintenMo.-based Herrman Lumber, said his inventories are stable for the time being. “We bought tional. Believe it at your own risk awfully heavy in the winter and it really hasn’t affected us,” he said. “We had everything out of Copyright 2008-2009-2010 -2011-2012

Register Here: http://bcmcshow.com/

Component Advertiser LOGIN

PO Box 16685 Home Menu didn't Click here or Fernandina Beach, FL. load.

32035

Continued on page 8

JOIN SBCA

CONTACT US

SITE MAP

PRINT

QUESTIONS

refresh to view.

For Attendees

About New Orleans

no reproduction in whole Show Schedule & Events BCMC Build or in part without permission from BCMCs Past

the component advertiser Join SBCA

BCMC History eMagazine Control Panel/Options ReadingContact options Us HELP You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above.

Archive Copies Available On Line www.componentadvertiser.com

Member PHONE: 800-289-5627

2012 Building Component Manufacturers Conference © Menu | Legal

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er anufacturing

-Reconditioned in 2003 -Cuts 2x4 thru 2x12 from 12" to 24' -Powered Angulation & Carriage - B e l t Wa s t e & I n c l i n e C o n v e y o r -230 Volt / 3 Phase . $5,900 FOB ND. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

g in

Idaco Componamatic 4 Blade Component Saw

SAWS

d

Five blade saw that includes PC and cabinet and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut Automated Length Stop & Automated is 14 inches and the shortest angle cut is 18 Saw Rotation as directed by Truss Design inches. The saw cutsfrom 2x4 through 2x12 Software. 10' Infeed & 20' Outfeed Roller lumber up to 20 feet in length. Angles are Conveyor with Stands. 5 HP Motor, set using digital readouts. Both the length 18" Blade. Dust Collector. Computer, and angle adjustments are power driven.

Monitor & Keypad. Add $7,000 for New $19,000 FOB AL. Wood Truss Systems Mango Touch Screen Upgrade. $13,900.00 765-751-9990 FOB AB. NOW $11,900 www.woodtrusssystems.com Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Used Apollo Saw with Mango Truss Automation

g

ASI B500 5 Blade Component Saw

SAWS

in

SAWS

Adverti$er

2001 Omni Mini-Miser Saw

P en

You Saw it in the

d

SAWS

Don’t Forget!

P en

omponent

June 1st, 2012 #05145 Page #4

-Auto Live Deck -Inkjet Print System D (Two Faces & One Edge) -Installation Available (quote upon request) $10,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

June 1st, 2012 #05145 Page #5

SAWS

e n ic io r t P uc ed R

8

2008 Spida Automated Truss Saw

Automated Stop & Automated Saw Rotation as directed by Truss Design Software. Digital LCD Touch Screen Monitor. Clamping Roller Table. Two Bag 3 HP Dust Collector. $26,250 NOW $18,500 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 Alpine AutoMill RS

SAWS

2002 Hain Quick Rafter Cutter

2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw

SAWS

SAWS

PHONE: 800-289-5627

-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 Mitek Cyber A/T 5 Blade Automated Component Saw

SO

Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

LD

R P ed r u ice ct io n

Model 344V saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer.

The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $16,900 FOB KY. Wood Truss Systems 765-751-9990

Waste & Incline Conveyor. NOW $49,900 Includes $5,000 Parts Allowance. FOB AZ. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

2003 Delta 16" Radial Arm Saw

Delta 33-411 16" Radial Arm Saw. Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22".

Features "Turret Arm" construction which allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph power. $1,800 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw

Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329

Adverti$er

SAWS

R P ed r u ice ct io n

SAWS

June 1st, 2012 #05145 Page #6

1987 Alpine Timber Mill 620 Pro Saw

MD MH6C-20 / SN R0347 / 230 volts 3 phase / Saw Foot Print: 40’ overall (30’ Frame & 10’ Incline) x 7’-6” tall x 8’ wide /Bought new and used in small plant / See the operational video link. $8,500 FOB GA. Salter Associates 770-434-1006 www.salter.com

1995 Auto Omni Component Saw

Re Pri du ce ct io n

2002 Alpine AutoMill RS 5 Blade Automated Component Saw including Live Deck

Automated via Download or SemiAutomated via Touch Screen Input 19 Axes of Automation. Cut 2x3 thru 2x12 from 13” to 20’. Label Printer. 5 Chain Live Deck. Extra Set of Blades. Waste & Incline Conveyor. Self Dumping Hopper. $40,000 NOW $35,000 FOB WA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2003 Alpine Speed Cut Metra-Cut Centerline Saw with Speed Measure

Location: AZ Price: $5,500.00 -20' Speed Measure, Roller Conveyor & Stands -Turntable Air Brake Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1995 Auto Omni component saw, rebuilt in 2004. 5-blade automated saw includes shaker waste conveyor with factory side pans. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20' to 9" @ 90°/90°, spare blades

2005 Koskovich Auto Omni Component Saw Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical.

Wood Truss Systems 765-751-9990

PHONE: 800-289-5627

Hain Quick Rafter Cutter

Location: AZ Price: $3,500.00 -2x4 and 2x6 to 45 Degrees Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Price-$19,000 FOB Denver CO. Contact: John Wood

303-249-7037

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

SAWS

June 1st, 2012 #05145 Page #7

Don’t Forget!

You Saw it in the

SAWS

Adverti$er

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

765-751-9990

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

•

2006 Alpine AutoMill SC 5 Blade Automated Saw

Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $59,900 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 MiTek Cyber A/T

2002 Koskovich Auto Omni Component Saw

Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900.

Wood Truss Systems 765-751-9990

$64,700 FOB IN Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor with PC in enclosure for fully automated or manual part input, and catcher-side monitor. All powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet.

Minimum 4-angle cut 22" (17" in manual mode). 24' carriage, belt scrap conveyor included with long incline, spare enclosure, and all available spare parts. (approx. 12').

220v, 3ph power required.

Omega Round Web Saw

SAWS

SAWS

2006 Monet DeSauw PD-6 Power Deck Lumber Feed System

2007 Lauderdale Hamiltion Up-Cut Saw with Mango Plate Marker

Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 765-751-9990

2006 TCT EZ Trimmer

cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 765-751-9990

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

PHONE: 800-289-5627

2002 Alpine AutoMill RS

Model 348A saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer.

The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $19,900 FOB KY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

-6 Chain Live Deck -16' Wide x 20' Long -Foot Pedal Control $6,750 FOB GA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Lauderdale Hamilton 24” Super Chop Up-Cut Saw. Mango Plate Marker with Touch Screen Computer. 10’ Infeed & 20’ Outfeed Roller Conveyor with Stands. Dust Collection System. $14,900 FOB LA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Wood Truss Systems 765-751-9990 inc.

MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

2004 DeSauw Desawyer 2000 Component Saw

NOW $55,755 $61,950 FOB: NY Five blade automated component saw that includes shaker pan and waste incline.

This saw cuts from 8 to 115 degree angles.

The minimum 90/90 cut is 14 inches and the shortest angle cut is 18 inches. The saw cuts 2x4 through 2x12 lumber up to 20 feet in length. OEM reconditioning in 2010.

• • • •

Adverti$er

ProSales Online Continued from page 3

inventory. Our vendors also bought really heavy.”

Mike Schwarz, marketing director for ABC Supply, No. 1 on the 2012 ProSales 100, accredited the higher demand to slightly warmer weather, adding that the company didn’t adjust its winter buying habits in anticipation of spring and summer allocations. He said that some ABC Supply locations experienced extended ship times, but to no great extent.

Yet Wuerdeman and other dealers who say they’ve yet to be affected by the side effects of the excessive demand aren’t entirely optimistic for the near-term. A roofing dealer in Omaha, Neb., who bought heavier in 4Q 2011, says that the uptick in demand following local storms could lead to another period of allocations. Manufacturers “can only produce so much,” he says. “If demand is there for it, they’re in the driver’s seat.”

According to Corah, this is already contributing to delayed and staggered ship times for new orders as manufacturers work to keep pace with demand in part by pulling extra product from non-affected regions.

“It’s not like all the orders are getting shipped in four to six weeks,” he says. “Some of them are five to eight weeks.” Meantime, he reports that some of his members are looking outside their area for manufacturers and distributors who have product on hand, even if it means paying a premium.

For additional information visit ProSales Online: http://www.prosalesmagazine.com/building-materials/dealers-weigh-in-on-roofingproduct-demand.aspx

SAWS

TRUSS EQUIPMENT

TRUSS EQUIPMENT

1999 Mitek Smart Set Pro Semi-Automated 5 Blade Component Saw

1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System

2002 Mitek RoofGlider 14' x 100' Side Eject Roller Gantry System

Semi-Automated Saw with Touchscreen Input 5 Blades cut up to 2x12 Material from 18" to 20' in Length 240 Volt / 3 Phase $14,900 FOB CA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

June 1st, 2012 #05145 Page #8

2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted). Slotted Top Tables with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers. Tee-Lok 14’ Finish Roller. Dismantled & Stored in Early 2011. Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™. $33,500 FOB SC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Mitek RoofGlider 14' x 24" Diameter Roller Gantry (Trackless). (13) Slotted Top Tables with Pop-up Skatewheel Ejectors. Roof Truss Jig Hardware & Bridge Plates. Roller Gantry Park Sections. 6 Powered Rollers, 6 Idle Rollers & 6 Receivers. Mitek 14' x 24" Diameter Finish Roller. $49,400 FOB CA Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ For more WizardPDS® Information visit: http://eideintegratedsystems.com/ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

TRUSS EQUIPMENT

2006 Koorsen Plate Detector

Truss plate detector significantly reduces field repairs by indicating missing connection plates. Features adjustable height and missing plate alarm. Button controls on stand-alone console. +/- Footprint dimensions. 17’ x 3’ x 5’. Compatible with any type of truss roller. 110 volt, 1 phase electrical. $6,800 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #9

Don’t Forget!

Wood Truss Systems

You Saw it in the

Adverti$er

inc.

765-751-9990 www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

R P ed r u ice ct io n

Combining the qualities and expertise you should expect from an industry supplier

2005 Robbins No-Rail Gantry

14'x180' trackless gantry with aisles. Includes (2) gantry heads, (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive. System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 440v, 3phase. Seller is willing to sub-divide this system. $79,000 NOW $59,000 FOB TX

PA

2008 IBS Yard Barn Wall Panel Line

FO

B

-

$24,900 FOB MI

Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI

2004 Ruvo 925 Door Machine

Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA

2005 (8) Projector SL Laser System

R P ed r u ice ct io n

Eight-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.

$62,600 :: FOB AZ Condition: Good 2005 Koskovich Auto Omni $52,900 FOB UT

NOW $49,900

Fax: 765-288-9991 PHONE: 800-289-5627

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

Phone: 765.751.9990 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

800-382-0329

June 1st, 2012 #05145 Page #10

TRUSS EQUIPMENT

www.wasserman-associates.com

2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta

-32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase

8

Wood Truss Systems 765-751-9990 inc.

MANUFACTURERS’ REPRESENTATIVES

Tee-Lok Trackless Floor Truss System

Trackless floor truss press includes gantry head with 20 inch diameter roll, 6' x 45' steel table (42' working length). Builds from 12" to 27" deep trusses, up to 42 foot long. Gantry has toggle forward / reverse & panic-stop controls. 220 volt, 3 phase electrical. $18,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

TRUSS EQUIPMENT Klaisler Finish Roller Press

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

Hundegger SC-1 $310,000 FOB NY

Model SC 1 saw includes vertical finger mill with 5.5 kW router motor, 40mm end mill., 25.5" diameter blade, 12.3 HP, 1480 RPM saw motor, and REA 16 pin, single-head ink-jet print option.

System includes Hundegger extended infeed deck with OEM automated clamping system which includes pressurized horizontal and vertical clamps that hold and straighten twisted, bowed, and curved lumber; outfeed framework: gripper wagon is mounted – rack and pinion system. Saw is a computer numeric controller (CNC) saw capable of cutting a wide range of roof, floor, and wall framing components, including I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam.

The saw can also cut 2x dimensional lumber stacked up to four pieces deep. Hundegger's Whole House Saw quickly and efficiently processes all types of cuts and profiles used in house construction. Comes with operator console, flat screen monitor, and industrial keyboard, Hundegger computer loaded with Windows XP/built in LAN card, and electronics cabinet which is A/C climate-controlled. Complete with waste conveyor system and incline, The SC 1 is upgradeable by OEM. OEM maintenance program, tech support and expert installation available at additional cost. 480 volt, 3 phase power.

PHONE: 800-289-5627

2002 MiTek Tee-Tracker Gantry System

14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Read/Subscribe online at www.componentadvertiser.com

Klaisler TR214-24 Features two 5 HP motors with a frequency drive, two 24 inch diameter rolls, 14 foot wide throat, push button controls, emergency stop, safety bars and limit switches. 230/460 volt, 3 phase electrical. $8,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 MiTek Railrider Floor Machine

Model 82500-502, 24 inch diameter gantry head with riding platform and push-button controls. Machine builds floor-trusses to 42 foot working length (54 foot overall length) truss depth capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, plate storage along table edge. Includes all available hardware. 230 volt, 3 phase electrical. $39,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Adverti$er

SA

June 1st, 2012 #05145 Page #11

alter & ssociates

Engineered Wood Products Industry

Klaisler 6-40 Traveling Floor Machine

Tee-Lok Side-Eject 24" dia Gantry

165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware.

System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 Pacific Automation Auto 8 Gantry System

8'x40' hydraulic press system specifically designed for smaller trusses. No finish press required, system includes single joystick control, operator platform and drilled / tapped, steel, table building surface. 50 ton press capacity. 230 Volt, 3 phase electrical. $10,990 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Page 7 No Change...

04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform.

24 roll -10HP motor w/electric softstart. Item F1026 Truss Machinery Connections 800-580-6430

PHONE: 800-289-5627

Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 MiTek TK-8 Clamp System

MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 765-751-9990

2005 Koskovich Jet-Set

23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990

Truss Equipment Installation Consulting

770.434.1006 www.salter.com

2001 Alpine (100’) Floor Track Gantry System #2 2001 Alpine (100’) floor track 2001 Alpine (100’) floor track gantry gantry system / (1) system / (1) 7.5 HP 24” gantry head / Model 705 / SN 705A1007/ (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL S22,000

7.5 HP 24” gantry head / Model 705 / SN 705A1006 / (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase. FOB FL.

2001 Alpine (100’) Interior Exit Conveyor System

TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press

2001 Alpine (100’) interior (14’ x 6” diameter x 1” shaft) steel roller conveyor system / spaced 6’-0” on center / (9) powered rollers / (10) idle rollers (14) receiver arms for side “A” roof truss table and (14) receiver arms for side “B” roof truss table / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL

Read/Subscribe online at www.componentadvertiser.com

6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase .

FOB GA $14,500

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #12

Don’t Forget!

You Saw it in the

Wood Truss Systems

Adverti$er

765-751-9990

www.woodtrusssystems.com

inc.

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

2009 Stealth Trackless Gantry System (NY2)

$81,900 NOW $55,755 FOB: NY

Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

The party with North American lumber producers continued last week, albeit with a wee slowdown by Friday due to the mass exodus of US staff in advance of the Memorial Day long weekend. Prices on almost all commodities stayed firm or rose slightly, causing conniptions to buyers who had been holding off restocking in hopes that prices would soften. Traders reported that customers called back repeatedly for endless rounds of small, fill-in orders.

With secondary sources still refusing to stock wood and prices maintaining their current highs, one has to wonder what the business plan is for later in this US home building season.

Again the wider sizes -- used most in multi-family building -- ruled the market, with WSPF 2x8’s popping up another $10 to end the week at US$310 mfbm. This item is now at a $60 premium over this time last year, and a $34 increase over one month ago. With no signs of slowing.

One the west coast, green Douglas fir mills once more could not catch a break, with prices on that species softening after a brief rally.

OSB in the central zone maintained its $20 increase of the previous week to close last week again at C$240 msf.

14' x 80' trackless side-eject gantry equipment with (10) all slotted-steel, continuoustop 6'-6" tables, (10) side ejectors. System features a 36" Stealth gantry roller, and (4) 14' transfer rollers, and with limited conveyor: (4) 14' inside pwr/idle conveyors, and (6) 14' outside conveyors. System was OEM refurbished in 2010, 460 volt, 3 phase power. OEM support and installation available.

Fresh forest fires were sparked in northern Ontario and parts of the US. It appears a long, hot summer is looming. Concerns of fibre restrictions are becoming increasingly more real. Even in areas not suffering from wildfires there are likely to be bans in effect until it is safe to operate heavy equipment in the back country.

Many mills have already invested in logging and are in fact right now waiting for access to the forest to pull the last of their logs from roadside to the sawmill. Whether this stockpile will be enough to last until probably September, when temperatures being cooling, remains to be seen.

In the east of Canada several mills had to close or curtail due to a glut of wood chips. The pulp and paper sector in North America has been hit badly by the dual occurrences of a lagging US economy and aggressive pulp producers in the southern hemisphere. Demand for softwood chips regionally has dropped, and eastern spruce sawmills have had to halt production until they can find a home for their residuals. Wood chips can be a fire hazard of their own. One New Brunswick facility has reported a pile of wood chips two storeys high. This inconvenience, not to mention potential danger, must be resolved before operations resume.

R P ed r u ice ct io n

Dimension Lumber Key Prices

8 $14,900

PHONE: 800-289-5627

For this week’s prices subscribe to Madison’s at www.madisonsreport.com

Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16 Read/Subscribe online at www.componentadvertiser.com

Last Week $309 $299 $310 $371 $365 $250 $300 $410 $240

Change +1 -1 +10 -3 +5 -10 -10 0 0 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

June 1st, 2012 #05145 Page #13

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Adverti$er

Wood Truss Systems

inc.

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

Design your own custom roof truss gantry!

$68,140 FOB TN & TX

R P ed r u ice ct io n

Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution.

Wood Truss Systems 765-751-9990

2006 MiTek Infeed Deck

2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity.

Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 765-751-9990

1994 (50') Robbins Roof Truss Gantry

1997 Pacific Automation Auto-8 (40’) Truss Press

-8' x 40' Drilled & Tapped Steel Table -50 Ton Hydraulic Press -24" x 96" Platen -Floor Truss Jig -Press 2x4 and 4x2 with no adjustment. $29,500 FOB ID. NOW $13,900 Wasserman & Associates 800-382-0329

2002 Tee-Tracker System

MD Super Torque / 10 HP / 7 ea. (5’x14’) steel tables with 2x6 underlayment and 1” dense plastic top / Includes (4) ea. uni-strut channels per table /(1) ea. pop-up skate roller per table / (6) Receiver arms / No Exits rollers / 15 ea. 24’x16”x1’ bridge plates / (65’) floor track / 230 volts 3 phase. $15,000 FOB GA Salter Associates 770-434-1006 www.salter.com

14' X 96' side-eject, trackless system complete with (16) 6' X 14'slotted, 3/4" steel-top tables w/ ejectors, (38) outfeed conveyors (190’ @ 5’ o.c.), two (2) MiTek TeeTracker Gantry heads (14' X 24" dia.) featuring riding platform, electrical supply mast, Demag Gmb motor and drive components with Auto-Lube, complete with 14’ X 24" dia. final roller.

System includes park stations and all available hardware with some spare drive wheels, etc. 240v, 3ph, 60Hz.

8 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

June 1st, 2012 #05145 Page #14

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Adverti$er

Wood Truss Systems

inc.

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

2005 MiTek RailRider End Eject Floor Machine

Tee-Lok 14' x 24" Diameter Finish Roller plus 4 Sections of Idle Conveyor

2009 Stealth Trackless Gantry System with Auto Puck System

$125,000 NOW $113,304

End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter -Two 5 HP Motors gantry head roll, depth truss capacity from -Conveyor Section: 6'-6" x 12-0" x 33 1/2" 10 inches to 24 inches. Clamping fence FOB AZ - $6,500.00 Wasserman & Associates actuated by air cylinders mounted under 800-382-0329 the table, pop-up end-eject ejector idler www.wasserman-associates.com rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks.

Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 2 0 0 3 R o b b i n s " S u p e r To r q u e " 765-751-9990 14' x 24" Diameter Finish Roller -230 Volt / 3 Phase -$9,900 FOB SK Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2001 Alpine Track Gantry Heads (Qty. 2 Only 1 left)

Two (2) 24” diameter x 14’ throat, track gantry heads, 15’-0 ¾” rail centers, two available at this location. Price per each.

460 / 230 volt, 3 phase electrical.

Price: $6,900 ea. :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

n

e ic io r t P uc ed R Stealth Peak-Up Stackers (2)

Two (2) Peak-Up, Four Receiver Stacker Systems with four (4) arms each. Features four (4) stacker horses (2 left and 2 right) for use with scissor trusses, HD Drive System, Auto Indexing and spring assisted receiver arms. Holds up to 30 trusses from 16’ to 60’ in length. Price is per stacker. $19,950 NOW $19,950 each FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

FOB NY

14' x 58' Trackless Gantry, Side-eject system with auto jigging system in a continuious all steel slotted top configuration. Featuring (12) Automated puck systems with system computer and stand, (8) 6'-6" table sections, (8) ejectors and (3) 14' transfer rollers. Includes one (1) trackless Stealth 24" diameter gantry roller, side-ejects to transfer roller leading to (12) 14' inside pwr/idle conveyors and (13) 14' outside conveyors. System includes a large 16' capacity Integrated Stealth finish press. 460 volt, 3 phase. System was OEM refurbished in 2010, continuing support and installation available.

TRUSS EQUIPMENT

TRUSS EQUIPMENT

1997 MiTek Tracked Gantry System (TN)

Price: $32,900 :: FOB TN Condition: Good Category: Roof Truss Description: 86' x 14' side-eject gantry system with (11) plastic top tables with strut, with (1) model 6800 gantry roller, (+/- 75') interior conveyor and (+/- 75') exterior rollers. Includes all available system hardware and stand-alone receivers. Can be paired with the 2008 MiTek finish press for an additional $15,200.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

1996 MiTek Floor Truss Gantry System

Price: $13,900 :: FOB TN Condition: Good Category: Floor Truss Description: Model 66100 gantry with 24" dia. roller, builds trusses from 14" to 24" deep and up to 40' in length. Includes dual safety bars, pendant control and all available system hardware. $13,900 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

1999 Tee-Lok 40' Floor Truss Machine

$19,900 FOB SC Wasserman & Associates 800-382-0329

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

WALL PANEL EQUIPMENT

June 1st, 2012 #05145 Page #15

Don’t Forget!

You Saw it in the

Adverti$er

WALL PANEL EQUIPMENT

800-382-0329 2005 Panels Plus Framing Table

Triad Wall Panel Line

Four (4) station line includes Generation II framing table 10' x 20' long, squaring table 10' x 16' long with router bridge, squaring table with sheathing bridge 10' x 16' long includes laser, & tilt option, to router bridge section, and transition/exit table; No gundollies included, air-guns not included.

120 volt, 3 phase electrical, 100 PSI air. $18,900 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Panels Plus manual wall framer builds walls to 16’ length and from 8’ to 12' in height.

Includes 3-gun tool dollies each side, stud locaters, pop-up skate-wheel transfer, and motorized telescoping arms for adjusting wall height. Table also includes subcomponent layout tables and skate-wheel transition conveyor. (120v, 1ph, 100 psi air supply). Table is a trackless design for easy install. $15,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2004 IBS 12' x 16' Sheathing Table with Multi-Tool Bridge -26 Each - Senco FramePro 702XP Nail Guns -Plate Stitchers for Top & Bottom Plates -Bridge Tilt -Excludes Plant Net Computer/Enclosure

WALL PANEL EQUIPMENT

JobLine.com

800-289-JOBS 2004 Virtek LaserMC Wall Panel Cutting & Marking System

We’re here when you need help!

PHONE: 800-289-5627

WALL PANEL EQUIPMENT

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer

the

Time To Hire?

$24,900 FOB AB

-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output -Vista Angle Boss Cut-Off Saw -20' Capacity -Left to Right Material Flow -Environmental Computer Enclosure with Computer/Monitor -Laser is burning light -Used for 2 years Location: KS, Price: $27,900.00 Wasserman & Associates 800-382-0329

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Read/Subscribe online at www.componentadvertiser.com

2" Ball Coupler. Safety Chains with Hooks.

2,000 Lb Jack with Wheel. Wheel Fenders.

12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands.

Galvanized Rollers & Cross Members.

Stainless Steel Guide Pins on 16" Centers.

Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

2007 Panels Plus Sub-Component Nailer

Maximum Opening: 17" x 17 1/2". On/ Off Switches for Each Nail Gun. Button to Activate Squaring Stop, Foot Pedal to Activate Clamping, Excludes Nail Guns $7,500 FOB LA Wasserman & Associates 800-382-0329

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Don’t Forget!

You Saw it in the

765-751-9990

Adverti$er WALL PANEL EQUIPMENT

WALL PANEL EQUIPMENT Wall Panel Equipment Accessories

Combining the qualities and expertise you should expect from an industry supplier

2005 Viking ADT Wall Panel Framing System $37,990 FOB TX Panels Plus Manual Framer

Viking framing station with PreStage table and conveyors. Framing station model PS-Special, includes stud locators (16” & 24” centers), skate wheel ejectors, walk-through aisles, ½ HP motor and two (2) powered tool carriages.

Discharge speed of 12” per second. Once staged the framing sequence is event driven: guns fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4’-2”’ to 12’0” high, in lengths up to 20’ long. Includes two (2) 4’x 8’ plastic top setup tables, (1) set of 5’ wide x 10’ long skate wheel conveyors and (1) set of exit conveyors 24’ long.

System supported, and installation available from the OEM (Sold new for $132,000).

480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Guns not included.

June 1st, 2012 #05145 Page #16

16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 765-751-9990

$850 - 2006 Panels Plus Handle Bar Router $850 NOW $750 - Used Panels Plus 15' Skatewheel Conveyor with Stands (per Pair - 7 Pairs Available) $1,500 - 2005 Panels Plus Sub-Component Layup Tables $2,900 - Used Triad CN-4 Sub-Component Nailer $4,900 - 2004 Viking Fastrac 10' Portable Sheathing Bridge $145 Each - 2006 Associated Machinery 36" x 60" Material Carts - 7 Available $950 - NEW Wind Brace Saw for Wall Panel Metal Brace Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker $22,500 FOB NE. NOW $17,900 Wasserman & Associates 800-382-0329

2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies

NEED HELP WITH YOUR PANELS PLUS EQUIMENT?

$10,900.00 FOB TN Wasserman & Associates 800-382-0329

We offer:

Disassembly & packaging of equipment.

Installation by trained personnel.

Adjustment and calibration of equipment.

Training for operators and maintenance workers.

Recommend upgrade options.

Assistance in getting your fastening tools mounted and operational.

Contact Information:

email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Basic Automation 12' x 16' Interior/Exterior Wall Panel Line

Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge, Includes (25) Senco Staple Guns. $14,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

PHONE: 800-289-5627

Don’t Forget!

You Saw it in the

Adverti$er

Read/Subscribe online at www.componentadvertiser.com

June 1st, 2012 #05145 Page #17

FAX: 800-524-4982

omponent

anufacturing

You Saw it in the

TRUCKS & TRAILERS

Adverti$er

TRUCKS

&

TRAILERS

R P ed r u ice ct io n

TRUCKS & TRAILERS

Don’t Forget!

1994 Wabash T-30 Trailer

48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 765-751-9990

2008 Precision 42-60' Stretch Roll-Off Trailer (4001c)

Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1999 Western Star Truck with National 990 Crane

Model 4964F Truck with 20’-6” Flatbed.

475 HP CAT Engine. 8 Speed Manual Transmission. 215,885 Miles, National Model 990 Crane, Crane Capacity: 46,000 Lbs. 90’ Boom with Jib Option. $74,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

TRUCKS

TRAILERS

&

R P ed r u ice ct io n

M ACdverti$er

June 1st, 2012 #05145 Page #18

2003 Iron Steer 30' Gooseneck Roll-Off Trailer

-Model 12R30 -12,000 Lb Dexter Tandem Axles. -Bed Tilt -LED Lights $11,500 NOW $8,500 FOB NY Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Price Reduction

Page 15 No-Change ...

1997 Haulin 48' Roll-Off Trailer

2000 Raglan Trailer 48’

-Sliding Tandems -Hydraulic Neck -DOT is Current FOB IN, $5,900.00 Wasserman & Associates 800-382-0329 www.wassermanassociates.com

48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 765-751-9990

2004 Pratt 48' Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com

01 Haulin (Stretch 48 -70 ) $8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust.

Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430

1989 Western Star Boom Truck & Trailer Combo Price: $89,990 :: FOB WA Model 4964F boom truck, NTC 365 Cummins diesel engine, 18-speed transmission installed in 2008 (has only 5,000 miles on it), 1994 National Crane model 600C, 81 foot crane, recently refurbished at a cost of $10,000, 447,000 miles. 54,000 lb. GVWR. Includes one (1) custom built, peak-up truss trailer, with three axles, stake pockets, 1/4" thick steel wheel fenders, moveable light bars. Trailer can be purchased separately for $11,990.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

1995 Wabash 36'-50' Stretch Roll-Off Trailer

2005 Pratt 36'-50' Stretch Roll-Off Trailer

Sliding Tandems, Hydraulic Neck. $17,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

-Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires $9,900.00 FOB CO. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Read/Subscribe online at www.componentadvertiser.com

1999 Sterling Tractor

1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

TRUCKS

&

anufacturing

Don’t Forget!

You Saw it in the

TRAILERS

MISC.

Adverti$er

Wood Truss Systems inc.

June 1st, 2012 #05145 Page #19

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1997 PCS Hercules Auto-Feeder 1997 ASI 48-72' Stretch Trailer

Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329

Hain Powered Measuring Systems

-20' Hain Measuring System with Conveyor & Stands (No Infeed Conveyor) -15' Hain Measuring System with Infeed & Outfeed Conveyor & Stands $2,900 EA FOB NE Wasserman & Associates 800-382-0329

SO

MISC.

1999 Holz-Her Accura "S" 14' Beam Saw

LD

Price: $16,900 :: FOB TN Condition: Good Category: Trailers and Rolling Stock Description: ASI model 5AM stretch trailer from 48 to 72 feet, features sliding tandem axles, electric roll-off controls, fifth wheel connection and hydraulic lift.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Refurbished 2005 Hain 20Ft. Measuring System

2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet.

110 volt electrical.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

25 hp Sullair rotary screw air compressor, model LS-10. Rated 111 CFM @ 100 PSI. Also includes Sullair SR-175 dryer. The compressor is 230/460V and the dryer is 230V, 1 phase power. $8,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed.

460V, 3ph.

MISC.

MISC.

2006 Allison Material Carts

Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 765-751-9990

Virtek Laser Projection Heads

1999 Sullair LS-10 Compressor with SR Dryer

$4,499 FOB SC

QUANTITY ten (10) 4 red-laser heads (only) for up to 140 ft. projection @ 16' ceiling ht. Heads are model LPS-2D that were under OEM maintenance agreement since installation. Virtek license agreement required, OEM inspection required to obtain continuing maintenance agreement and installation. Contact us for serial number history per OEM records. $39,900 NOW $11,900 for all 4 FOB IN. Wood Truss Systems 765-751-9990

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Like New Altman Model 122 Dustless Sheetrock Saw

Call for Price. FOB NE. Wasserman & Associates 800-382-0329

Murphy-Rodgers MRT-9A Dust Collector

-Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums

Read/Subscribe online at www.componentadvertiser.com

$990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #20

Don’t Forget!

You Saw it in the

Adverti$er

Wood Truss Systems

765-751-9990

inc.

Price Reduction

800-382-0329

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

8

2006 Omni Miser Automated Material Picking System $89,000 FOB SD

-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000!

Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!

Click for WoodRunner Details: http://apexmw.com/ MISC.

2005 Williams Pulverizer

Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.

$8,000 FOB TN

MISC.

MISC.

1987 Jager TTS Auto Lumber Stacker $14,900 FOB NB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

MISC.

2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 MiTek Lumber Splicer

MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen.

Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

Lumber/Teeter Carts

-20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

MISC.

Don’t Forget!

You Saw it in the

MISC.

Adverti$er MISC.

Roller Table (16' x 5' x 32")

Mitek Lumber Splicer

HP Hydraulic System. 3" x 12" Maximum Plate Size (2x4 Material). Magnetic Platens for Plate Placement. Pneumatic Lumber Clamps. Foot Pedal Control for Clamping, Dual Push Button Control for Pressing. $4,750 FOB WY Wasserman & Associates 800-382-0329

A

inc.

MANUFACTURERS’ REPRESENTATIVES

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Door & Stair Equipment

Reconditioned RUVO Staircase Assembly Clamp

-Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Wood Truss Systems

June 1st, 2012 #05145 Page #21

NEW Strong Hold Topview Computer Cabinet

Location: OH Price: $4,900.00 -14' x 4' Capacity -Air Cylinder Clamping -16' x 4' Stair Clamp available at $5,400 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

26" Wide x 24" Deep x 66" High with 6" Legs. Polycarbonate Window. WeldedIn 12" Deep Keyboard Shelf. Three Point Locking System. Fan for Hot Air Evacuation. 2 Adjustable Shelves in Lower Cabinet. $950 FOB NE Wasserman & Associates 800-382-0329

Norfield Vertical Door Loader

2,800 Lb Capacity. 48" Stack Height 480 Volt / 3 Phase. $9,500 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

d

in

g

Door & Stair Equipment

en

Powered & Non-Powered Truss Rollers with Stands

Norfield 1020 Double-End Trim Saw

P

$350.00 Each - Powered (10 Available) $200.00 Each - Non-Powered (15 Available) 14' Long x 4 1/2" Diameter Rollers.

Adjustable Stands. 230/460 Volt/3 Phase 1/2 HP Motors . FOB SD. Wasserman & Associates 800-382-0329

2007 MiTek Ready Feed Live Deck

Auto-Feed live deck for component saw.

14' wide x 20'-6", 5 rails, safety-guarded sprockets, HD I-beam construction, footpedal control and adjustable height. Easily shipped and installed. 230V, 3 phase power. $7,500 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

MiTek PCS Component Express Conveyor M iTek / P C S C o m p o n en t Express conveyor, transfers wall subcomponents & parts between nailing stations and a framing station. Toggle controls, (2) 18” wide conveyors, 5 feet long each, included. 1 HP motor. 480 volt, 3 phase.

$3,200.00 NOW $1,500 FOB TX

765-751-9990

www.woodtrusssystems.com

Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 765-751-9990

Full House Double End Trimmer

Cut Casing, Jambs, Door Stop & Brickmold. $5,850 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Reconditioned 1999 Norfield 3800 LRO Door Lite Machine

Window Lite Cutting, Cylinder Lock Boring, Latch Drilling, Faceplate Routing, Overhead Template. $12,500 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Hiring Zone

JobLine.com, inc.

The

800-289-JOBS

Don’t Forget!

You Saw it in the

Adverti$er

June 1st, 2012 #05145 Page #22

new equipment showcase

Automated Jigging System AUTOMATE YOUR ROOF TRUSS LINE WITHOUT MOVING A TABLE

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL!

Truss Designers Needed in Alberta Canada NOW!

send your resume to mail@thejobline.com or

Register On~Line at www.thejobline.com Strictly Confidential!

Priority: Immediate Search Designer/Estimator Truss/Lumber Location: Texas

Designer/Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package estimating experience is a plus. Projects include commercial/ multifamily.

Compensation $45-55k (relocation assistance negotiable) Txt ID: J10493 to 406-210-1226

AUTOMATE

SETUP TRUSS PROFILE IN 60 SECONDS OR LESS

RETROFIT ANY ROOF TRUSS TABLE; WOOD, PLASTIC OR STEEL MINIMIZE DOWNTIME,

ONSITE INSTALLATION SAVES THOUSANDS OF DOLLARS AS OPPOSED TO OTHER RETROFIT SYSTEMS

THE LEAST EXPENSIVE DUAL PUCK RAIL SYSTEM ON THE MARKET, GIVES YOU A COMPETITIVE EDGE

To learn MORE about MangoTech Automated Jigging visit us at www.MangoTech.com.au Contact us at Sales@MangoTech.com.au or 866-GO-MANGO

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #23

Don’t Forget!

You Saw it in the

Hiring Zone

Adverti$er

new equipment showcase

JobLine.com, inc.

The

800-289-JOBS

Introducing the:

Purlin Plunger

SET TRUSSES FASTER WITH PREDRILLED PURLINS 





Time To Hire?



We’re here when you need help! visit: www.thejobline.com

Pre-Drill & Mark Only 2-3 Hammer Blows (60d Nails) Purlins Reduce Field Labor by 25-30% Set Trusses Faster & More Accurate Reduce the Exposure to Jobsite Fall Hazards Pre-Drilled & Marked Purlins (Shown)

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL!

Florida!

Designer/Senior Designer Truss Location: Florida

Details: Opportunity for a Senior Designer with 3-5+ years of experience in wood truss design. The ideal candidate will have Alpine Software experience. Please inquire for additional information.

Txt ID: J10487 to 406-210-1226

Immediate Search Position: Plant Operations Manager - Truss Location: Rocky Mountains

Visit us at www.SQ-1Design.com

Specifications and Gallery 

Multi head, (3) 1/2HP industrial-duty drill head design allows for pre-drilling purlins from 4’up to 20’ in length with 5.6 sec. cycle time



Drill heads feature “quick stop” clamping for fast drill head location movement



Drill bit detection provides warning to operator in the event of drill bit failure



Features shaft driven infeed/outfeed material handling chain conveyor. Belt conveyor transfers drilled purlin to outfeed deck with auto-eject feature



Vertical and horizontal air clamping results in consistent and accurate hole placement



Touch screen PLC controls create user friendly operator interface for both manual and automatic operation



Automatic operation features material detection devices resulting in activating indexing of all sequences and transfer to outfeed material deck.



1ph. 230V power

Operations/Plant Manager needed with 5+ years truss industry experience. Responsible for estimating, costing, purchasing design, administration and production. No sales responsibility. Plant size $3M+ Compensation: $75k+- (relocation assistance negotiable) Txt ID: J10494 to 406-210-1226

Clamping

PLC Touch Screen Control

Drill Bit Sensor

Centerline Marking

Outfeed Deck

Outfeed Belt Conveyor

Outfeed Ejectors

Drill Head Adjustment

Sean Hubbard 317-440-2804 Sean@SQ-1Design.com Fax 320-210-4237

Jay Bunyard 317-354-5438 Jay@SQ-1Design.com Fax 320-210-4237

Catch us on thejobline.com PHONE: 800-289-5627

Scan our QR code to view our latest video http://www.youtube.com/watch?v=78A3uIJGj4U

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #24

Don’t Forget!

Adverti$er

You Saw it in the

new equipment showcase

On the Cutting Edge...

New! Porta Field Press

New! Roll Splicer

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Phone: 530.295.8068

Fax: 530.295.0468

Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672

Features: • • • • • • • •

Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area

Call 770-434-1006 For Details Salter & Associates www.salter.com

We go to any lengths to expand your opportunity.

PHONE: 800-289-5627

Features: • • • • • • • •

Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place

Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com

You find the opportunity -- we’ll build you the products to meet it.

Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

An

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Hiring Zone

JobLine.com, inc.

June 1st, 2012 #05145 Page #25

Don’t Forget!

You Saw it in the

Adverti$er

new equipment showcase

The

800-289-JOBS

800-382-0329 email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

@JobLine Business Development Manager Laminated Beams

Location: Texas Work with the Sales manager to determine commercial business potential in Texas and surrounding states. Build relationships with contractors, architects, designers, and business owners in the commercial industry using Glulam products; responds to RFQs, sources take offs & shop drawings, prepare quote proposals & letters, estimates freight, generates bid documents, completes internal files, and manages orders & shipments for awarded bid.

Txt ID: J10485 to 406-210-1226

Design Manager/PE CET, AScT

PE, CET, AScT Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities..

The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family.

Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region.

Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here.

Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program.

Canadian CET or AScT, or Degreed Architectural or Civil Engineer preferred.

Detailed job description is available.

Txt ID: 10486 to 406-210-1226

PHONE: 800-289-5627

NEW Monet DeSauw Wood Finger Jointing Line

Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada.

Advantages: -Reduce Waste

-Positive Ecological Impact

-Produce Straight Material

$79,900 FOB MO

www.wasserman-associates.com

Immediate Search Estimator - Truss/Lumber Location: Texas

Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package design experience is a plus.

Projects include commercial, multifamily, government, and industrial.

Compensation $45-55k (minimal relocation assistance possible) Txt ID: J10498 to 406-210-1226

Priority: Immediate Search Outside Sales - Truss/Panel Location: DC/Metro

Looking for an Outside Sales rep in the DC/Metro market and surrounding areas who can bring $3-4M+ to the table. Floor Truss, Roof Truss, Wall Panels and EWP. This highly successful manufacturer has multiple plants and can easily handle all you can sell. Excellent reputation for quality, competitive pricing and on time delivery.

Manufactures Roof & Floor Trusses, Wall Panels and EWP. Compensation: $70k-+, 6 figures possible Thom's Notes: One of my top 5 employers.

Great benefits and outstanding advancement potential.

Txt ID: J10496 to 406-210-1226

Hiring Zone

Priority: Immediate Search Designer/Senior Designer Truss/Panel/I-Joist/EWP Location: Edmonton, Canada

Priority: Immediate Search Production Manager - Truss/ Panel Location: Midwest

This is a Job in EDMONTON CANADA

Direct production of wall components, roof and floor trusses and floor systems for custom, single family homes. Plant produces 175+- homes a year. reporting to this position are 8-15 production workers.

Responsibilities include production, scheduling, costing and purchasing 5-10+ years components experience required. Will consider move up if qualified.

I am looking for a high energy designer who is willing to learn and apply all aspects of truss, panel, I-Joist, and EWP design.

Experience required: 5+ years in component design plus JobLine skills evaluation above average. Primary duties include design, layout, optimization, and cutting/ production documents. Secondary duties include customer service. Skills required include MiTek software, AutoCAD, will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, framing components, I-joists, EWP, hardware.

Compensation: Salary from $45-75 CN depending upon experience and performance. Relocation is open to negotiation.

Thom's Notes: If you are a US Citizen, the employer will also consider your application. NO DEGREE REQUIRED! Txt ID: J10497 to 406-210-1226

Read/Subscribe online at www.componentadvertiser.com

Compensation: $45-60k base salary, plus bonus potential when profits return. Vehicle w/expenses provided. Average 45-50 hours per week in peak season. Company benefits package, bonus program, vacation plan, and 401k program are detailed in our Company Profile. Relocation assistance negotiable.

Thom's Notes: I need a true Operations/Plant Manager with career that doesn't require a major step back for this opportunity.

Txt ID: J10041 to 406-210-1226

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

June 1st, 2012 #05145 Page #26

Don’t Forget!

You Saw it in the

Adverti$er

Hiring Zone

new equipment showcase

765-751-9990

inc.

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

JobLine.com, inc.

The

800-289-JOBS

Combining the qualities and expertise you should expect from an industry supplier

WoodRunner by Apex Machine Works $114,900 FOB MN

8

email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Truss/Panel Designer

Location: New England Truss and wall panel design using MiTek software on single and multifamily projects.

Has to be able to hit the ground running with strong wall and truss skills. Ability to step into the desk and instantly use MiTek software is a non-negotiable requirement.

Compensation: base pay $45-55k+depending upon experience. Relocation is acceptable with reasonable expenses paid and is open to negotiation.

Txt ID: 10482 to 406-210-1226

The WoodRunner is a revolutionary step forward in automated lumber retrieval systems. As a totally automated system, the WoodRunner eliminates the costs and limitations associated with manulally fed saws. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Mizer, Alpine's ALS and other linear saws. Click on the photo for additional images, a brief VIDEO, or to download a Brochure and a footprint layout for Wood Runner Miser Specs or Wood Runner Alpine ALS Specs.

Hiring Zone

Truss Designers & PEng.(s) Needed in SK & MB Canada NOW!

send your resume to mail@thejobline.com or

Register On~Line at www.thejobline.com Strictly Confidential!

PHONE: 800-289-5627

Sales/Plant/Design/Estimating Manager Are you a multi-tasker with the ability to grow sales, lead design, and manage operations for a plant that has potential to produce $20M? The job requires someone who has experience with total takeoff, design/layout/engineering using MiTek software, manufacturing operations, and managing multiple department while focusing on growing sales. The ideal candidate will have either been a GM or past owner, who came up through the business in manufacturing, design or sales. If this is a possible match for what you are looking for, let's talk!

Email to request information thom@thejobline.com

IMMEDIATE OPENING Estimator - Truss

Location: Mid Atlantic We need a experienced Estimator for Single Family Custom, Commercial, and Multifamily truss, panel and EWP. Must have experience with MiTek eFrame for estimating or Sapphire software. Truss Design is not the main focus of this job.

Other pre-screening specifications apply Compensation: $20-26hr.+- +OT based on ability and experience. Relocation assistance is negotiable.

@JobLine

Read/Subscribe online at www.componentadvertiser.com

Catch us on thejobline.com URGENT-NEED NOW! Designer - Truss

Priority: Immediate Search Location: Texas JobLine Senior Designer ranking or WTCA III certification, and MiTek software experience required for this position. Prefer someone with commercial and multifamily and having wall panel experience is a plus. $50-60k+- to start, relocation assistance negotiable.

Txt ID: J10480 to 406-210-1226 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Safety First!

Don’t Forget!

You Saw it in the

Safety Meeting Topics

June 1st, 2012 #05145 Page #27

Adverti$er Aserrado y elaboración de artículos de madera

From State Fund CA.

Los aserraderos y fabricantes de artículos de madera utilizan poderosas máquinas para cortar, contornear y conformar productos diferentes de madera. Las lesiones más frecuentes entre los trabajadores de la industria maderera incluyen traumas en las manos y dedos causados Wood millers and manufacturers use powerful cutting machines por las cuchillas y la maquinaria, lesiones en la parte inferior de la to cut, route, and shape wood materials to create different products. columna debido al levantamiento de objetos pesados, y esguinces y The most frequent injuries to wood industry workers include trauma to torceduras debidas a movimientos repetitivos. hands and fingers from blades and machinery, lower back injuries due Vístase de manera acorde con el trabajo. Use ropa debidamente to lifting heavy objects, and strains and sprains due to frequent, repeated ajustada, quítese la joyería, y amárrese el cabello hacia atrás al trabajar movements. alrededor de maquinaria Use guantes de seguridad para manipular la Dress for the work you do. Wear close-fitting clothing, remove madera y los productos, pero no los use cuando se encuentre cerca de maquinaria en movimiento. Use calzado de seguridad para proteger jewelry, and tie back your hair when working around machinery. Wear sus pies de los productos y materiales pesados, y suelas antideslizantes gloves to handle stock and product, but don’t wear them around moving para prevenir resbalones, tropiezos y caídas. Las gafas de seguridad y machinery. Wear protective footwear to protect your feet from heavy las caretas protegen sus ojos y su rostro contra el polvo y partículas de products and stock, and slip-resistant soles to prevent slips, trips and falls. madera lanzados al aire. Use protección auditiva al ingresar a las áreas de Safety glasses and a face shield protect your eyes and face from flying plantas o al operar maquinaria que produzca niveles peligrosos de ruido. dust and wood particles. Wear hearing Obtenga capacitación en todo el equipo que usted opera. Las protection when you enter plant areas or máquinas eléctricas de corte y mecanizado, las herramientas de corte, operate machinery that has unsafe noise y los elementos de sujeción pueden causar cortaduras, perforaciones, levels. amputaciones e incluso la muerte. Sepa cómo operarlos de manera segura. Utilice métodos de bloqueo con candado y etiquetado cuando Get training on all of the equipment deba inspeccionar, mantener o despejar atoramientos en la maquinaria. that you operate. Powered cutting and Las piezas móviles y de corte deben tener guardas protectoras para tooling machines, cutting tools, and mantener sus manos y otras partes corporales alejados de ellas. fasteners can cause cuts, punctures, Además, cubra las áreas que puedan permitir que materiales como amputations and even death. Know how desportillados y astillas de madera resulten lanzados fuera de la to operate them safely. Practice lockout máquina. Use los equipos únicamente si las paradas de emergencia / blockout when you need to inspect, y los dispositivos de emergencia están funcionando debidamente. maintain or clear jams on machinery. Moving and cutting parts should Para prevenir esguinces y torceduras a sus brazos, hombros y have guard protectors to keep your hands and other body parts away from abdominales, mantenga su trabajo cerca de su cuerpo para el máximo them. Also guard areas that could allow materials such as wood chips confort y nivel de fuerza. Guarde el material y los productos a una and splinters to fly out of the machine. Only operate equipment if the altura que quede entre la altura de las rodillas y de los hombros para el emergency stops and safety devices are working properly. acceso fácil y más seguro. Use las técnicas de levantamiento apropiadas, To prevent strains and sprains to your arms, shoulders, and manteniendo su columna recta e impulsando sus movimientos con sus piernas. Evite levantar cargas pesadas. Use equipo para levantar cargas, abdominals, keep your work close to your body for the most comfort and carretillas, montacargas (con la debida capacitación) y/o transportadores power. Store stock and materials between knee and shoulder height for para mover artículos pesados. Las lesiones ergonómicas pueden tener easy, safer access. Use proper lifting techniques by keeping your back como causa la fatiga y el movimiento excesivo. Tómese micro recesos straight and powering your moves with your legs. Avoid lifting heavy frecuentes para dar un descanso a su cuerpo. Rote sus tareas durante el loads. Use lifting equipment, dollies, forklifts (with proper training) and/ día para evitar el uso repetitivo y excesivo de sus músculos. or conveyors to move heavy items. Ergonomic injuries may be caused by Mantenga la seguridad del ambiente de trabajo proporcionando fatigue and overuse. Take frequent micro-breaks to give your body a rest. iluminación adecuada para la operación de la maquinaria y movimientos Rotate your tasks throughout the day to prevent overuse of your muscles. seguros en la planta. No descuide el aseo y limpieza del sitio de trabajo Keep the work environment safe by providing adequate lighting for para asegurarse de que se limpien inmediatamente los derrames, el polvo safe machinery operation and movements around the plant. Stay on top y los residuos. Asegúrese de que haya un movimiento adecuado de aire of housekeeping to make sure that spills, dust, and debris are cleaned up y ventilación para eliminar el polvillo de la madera en el ambiente de trabajo. Use un respirador en aquellos trabajos donde se genere mucho immediately. Make sure there is adequate air movement and ventilation polvo para prevenir irritación y enfermedades de los pulmones. Aísle o to remove wood dust from the work environment. Wear a respirator for construya cerramientos alrededor de máquinas demasiado ruidosas o con dusty jobs to prevent lung irritation and illnesses. Isolate or enclose muchas vibraciones. Almacene debidamente los productos y desechos machinery that is too noisy or vibrates. Properly store chemicals and químicos para prevenir incendios y mezclas incompatibles. Tenga en el wastes to prevent fires and incompatible mixing. Have a trained first sitio a alguien capacitado en técnicas de primeros auxilios, un botiquín aider, first aid kit, and charged fire extinguishers on site. y extintores cargados.

Wood Milling and Manufacturing

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #28

Don’t Forget!

You Saw it in the

Adverti$er

Used Equipment Wanted!

765-751-9990

Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329 www.wasserman-associates.com

Take Back Your Business Become More Competitive with:

  

Powerful Software High Quality Connector Plates Independent Established Supplier

All at a Great Price

For a software demonstration call 1-800-652-6050 www.keymark.com

Join the Southern Pine Partnership!

Since 1915

As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org

JobLine.com

The

, inc.

800-289-JOBS(5627)

Time to Hire?

Affordable

Recruiting & Testing

www.thejobline.com PHONE: 800-289-5627

This Space is Available Call 800-289-5627 x1 or email

info@componentadvertiser.com

Since 1992

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #29

Don’t Forget!

You Saw it in the

Adverti$er

Business Listings

JobLine.com, inc.

The

800-289-JOBS

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com Wood Roof & Floor Trusses Wall Panels Engineered Components

CAD Design

Gould Design, Inc. Designing to your needs... A. One Gould project at -a time.

Christopher President

Time To Hire?

We’re here when you need help!

www.thejobline.com

Designing to your needs... One project at a time

Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards Industry Leading Professionals at your fingertips Overall design department cost reduced, saving you $$$ Experienced with multiple industry design software suites Up to date with US & Canadian Building Codes

(772) 475-3583 - Call Today

cgould@goulddesigninc.com | www.goulddesigninc.com

Your Ad Could be Here 2”x3” Single Card

$195 per YEAR! Sizes & Rates on-line

www.componentadvertiser.com

or call 800-289-5627 x 1

Mylon Stark

Professional Services Anywhere, Anytime Invest In Your People!

Here's a partial list of services BPS will provide to your operations:

• • • • • •

Improve Your Net Profit ! 

• •

Time Standards

(R.E., S.U. & Man-Minutes also known as Houlihan Method)

Proper Production Efficiencies, Pricing , Scheduling



Supervisor & Leadership Development Safety Integration Development of Safety Committees Developing Personal Responsibility for Operational Success Workplace Safety & Health Training for "Best Practice" Application OSHA and MSHA-related Training and Education Jobsite and Facility Audits and Inspections Incident Investigations

888.519.4130 toll-free

Lean Manufacturing Practices All Areas Are Covered 50% Shop - 50% Office Manufacturing, Design,

Admin Practices

Sales and

Tailored for Your Company



605.220.2342 mobile

info@bigpicturesafety.com www.bigpicturesafety.com

Truss Shop Labor Tracking Software Easy to use Software Track Your Labor Efficiencies and Labor Cost

Todd Drummond Consulting, LLC www.todd-drummond.com

todd@todd-drummond.com

Phone 603-763-8857

20 Years in Truss Industry - 9th Year in Consulting Service - 50+ Clients

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Your Ad Could be Here 2”x3” or 3”x2” Single Card

$195 per YEAR! 3”x4” Double Card

$295 per YEAR! Sizes & Rates on-line

www.componentadvertiser.com

or call 800-289-5627 x 1

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

June 1st, 2012 #05145 Page #30

Don’t Forget!

You Saw it in the

Reader Response Form FAX to: 800-524-4982

Adverti$er

Reader Response Sponsors

or email: info@componentadvertiser.com Name: ____________________________________________________ Company: ______________________________________________ Address: ______________________________________________ City:____________________________ State:______

Zip:______

Wood Truss 765-751-9990 Systems inc.

Combining the qualities and expertise you should expect from an industry supplier MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

Phone: _________________________ Fax: ______________________ Email: ____________________________________________________ How would you like to be contacted?

Phone

Fax Check All that Apply Email

Would you like to be a Reader Response Form Sponsor?

List of Items you are interested in: List the Page # and Title of the item.

Page # Item Title ____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

Would you like to be added to our subscription list?

PHONE: 800-289-5627

Yes:

Call 800-289-5627 x 1 or Email info@componentadvertiser.com

No:

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982