May 18th 2012 Advertiser

A #

143

PUBLISHED WEEKLY May 18th 2012 #05143

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Manufactured Structures Industry

Inside:

The Safety Officer: Steps Beyond Safety Meetings Part 2 page #3

BCMC 2012 page 3

UFPI Purchases AlabamaBased Manufactured Housing Supplier page 8

Madisons Canadian Lumber Reporter: page 12

Bargain Basement: page 22

JobLine Hiring Zone: page 22-27

New Equipment Spotlight: page 23-27

Safety First Topics in English/Spanish: page 28

Business Directory: page 29-30

Reader Response Form page 31

www.mii.com/MiTekAssurance

8 Page 2

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #3

Don’t Forget!

Adverti$er The Safety Officer You Saw it in the

Published Weekly

Steps Beyond Safety Meetings #2

Editor/Publisher

In a quick internet search, I can up with the following job description. Good start, but are there any ways that your safety officer can save money too?

Thomas McAnally tmcanally@componentadvertiser.com

Advertising

Thomas McAnally Position Available

Thomas McAnally - Editor

The Safety Officer

Subscriptions

Investigates accidents and advises preventive measures. Studies imminent threats within the work facility. Conducts activities that promote security and administer safety training. Conducts safety inspections, makes incident records, and reports the supervisor. Understands important regulations and is familiar with revisions, trends, and updates concerning best practices in safety.

Renae McAnally

Distributed FREE

via e-mail subscription or on line at www.componentadvertiser.com

Specific Tasks:

Download FREE and

subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources

•

Ensures that company personnel observe and follows established safety guidelines.

•

Attends regular department meetings to remain in line with comprehensive safety practices of the company.

•

Assists in the organization of awareness campaigns regarding safety, such as workshops for occupational safety, fire safety, etc.

•

Assists in the conduct of fire and emergency drills.

Industry Articles are the property of their creator unless otherwise noted

Like I said, a good start. But what about interaction with Human Resources to identify ways to modify company programs to lower loss modifiers, ratings, and save money. HR shouldn’t do it blind, neither should the Safety Officer. Together, they can look at both sides of savings 2012 BUILDING COMPONENT MANUFACTURERS CONFERENCE Disclaimer: We reserve the right to refuse and implementation. any advertisement or material that we deem ENG. SBC with Material SBC the Safety Officer work Handling and Production Manager toTRAINING include HIRING LEGISLATIVE STEEL TESTING TPI not in the interest of theCEUs industry or the Ad- FIRE Have PDHs WOOD ASSOCIATION MAG. managing asset safety.

Tear up a piece of equipment by being too rough on it, dropping a load of vertiser. The Advertiser is provided “As Is” siding or trim, or running a forklift through a rack of windows and bending frames costs money including typographical errors, omissions, and could injure people in the process.

Make sure that lift operators are certified and safety and mistakes both intentional and unintenminded.

Inventory should be where it is needed and not be in the way. tional. Believe it at your own risk Besides wasting time, walking around and stepping over excess stock and obsolete materials Copyright 2008-2009-2010 -2011-2012 is an accident waiting to happen. If it isn’t going to be used in a current production run, store it elsewhere or get rid of it. Next week, the Material Manager’s role...

LOGIN Component Advertiser

JOIN SBCA

CONTACT US

SITE MAP

PRINT

QUESTIONS

PO Box 16685 Home Menu didn't load. Click here or Fernandina Beach, FL. 32035 refresh to view.

For Attendees

About New Orleans

no reproduction in&whole Show Schedule Events BCMC permission Build or in part without from BCMCs Past

the component advertiser Join SBCA

eMagazine Control Panel/Options Reading options Contact Us BCMC History

You have two HELP options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above.

Archive Copies Available On Line www.componentadvertiser.com Member PHONE: 800-289-5627

2012 Building Component Manufacturers Conference © Menu | Legal

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Five blade saw that includes PC and cabinet and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut Automated Length Stop & Automated is 14 inches and the shortest angle cut is 18 Saw Rotation as directed by Truss Design inches. The saw cutsfrom 2x4 through 2x12 Software. 10' Infeed & 20' Outfeed Roller lumber up to 20 feet in length. Angles are Conveyor with Stands. 5 HP Motor, set using digital readouts. Both the length 18" Blade. Dust Collector. Computer, and angle adjustments are power driven.

Monitor & Keypad. Add $7,000 for New $19,000 FOB AL. Wood Truss Systems Mango Touch Screen Upgrade. $13,900.00 765-751-9990 FOB AB. NOW $11,900 www.woodtrusssystems.com Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Used Apollo Saw with Mango Truss Automation

Idaco Componamatic 4 Blade Component Saw

-Reconditioned in 2003 -Cuts 2x4 thru 2x12 from 12" to 24' -Powered Angulation & Carriage - B e l t Wa s t e & I n c l i n e C o n v e y o r -230 Volt / 3 Phase . $5,900 FOB ND. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

SAWS

g

g

ASI B500 5 Blade Component Saw

SAWS

in

SAWS

Adverti$er

in

You Saw it in the

d

SAWS

Don’t Forget!

d

anufacturing

P en

omponent

2001 Omni Mini-Miser Saw

P en

M ACdverti$er

May 18th, 2012 #05143 Page #4

-Auto Live Deck -Inkjet Print System D (Two Faces & One Edge) -Installation Available (quote upon request) $10,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

May 18th, 2012 #05143 Page #5

SAWS

e n ic io r t P uc ed R 2008 Spida Automated Truss Saw

8

LD

Automated Stop & Automated Saw Rotation as directed by Truss Design Software. Digital LCD Touch Screen Monitor. Clamping Roller Table. Two Bag 3 HP Dust Collector. $26,250 NOW $23,625 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

SO

1998 MiTek Cyber Saw

SAWS

SAWS

SAWS

R P ed r u ice ct io n

Frame #072, Fully automated five-blade component saw. Cutting performed by 2-16” X 6HP, 2-20” X 6HP, 1-32” X 12.5HP. WITH Dell PC upgrade featuring touch screen controls for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 and 4x2. Lengths cut from 11 inches to 20 feet. Includes scrap conveyor with incline, out-feed skate-wheel conveyor, 6-flight Mitek live, in-feed deck, a complete, well maintained, OEM serviced automated saw. 220V/60Hz/3ph. $17,900 FOB SC. Wood Truss Systems 765-751-9990

2002 Hain Quick Rafter Cutter

Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw

-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 Mitek Cyber A/T 5 Blade Automated Component Saw Waste & Incline Conveyor. NOW $49,900 Includes $5,000 Parts Allowance. FOB AZ. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

2003 Delta 16" Radial Arm Saw

Delta 33-411 16" Radial Arm Saw. Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22".

Features "Turret Arm" construction which allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph power. $1,800 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw

Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329

Adverti$er

SAWS

R P ed r u ice ct io n

SAWS

May 18th, 2012 #05143 Page #6

1987 Alpine Timber Mill 620 Pro Saw

MD MH6C-20 / SN R0347 / 230 volts 3 phase / Saw Foot Print: 40’ overall (30’ Frame & 10’ Incline) x 7’-6” tall x 8’ wide /Bought new and used in small plant / See the operational video link. $8,500 FOB GA. Salter Associates 770-434-1006 www.salter.com

1995 Auto Omni Component Saw

Re Pri du ce ct io n

2002 Alpine AutoMill RS 5 Blade Automated Component Saw including Live Deck

Automated via Download or SemiAutomated via Touch Screen Input 19 Axes of Automation. Cut 2x3 thru 2x12 from 13” to 20’. Label Printer. 5 Chain Live Deck. Extra Set of Blades. Waste & Incline Conveyor. Self Dumping Hopper. $40,000 NOW $35,000 FOB WA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2003 Alpine Speed Cut Metra-Cut Centerline Saw with Speed Measure

Location: AZ Price: $5,500.00 -20' Speed Measure, Roller Conveyor & Stands -Turntable Air Brake Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1995 Auto Omni component saw, rebuilt in 2004. 5-blade automated saw includes shaker waste conveyor with factory side pans. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20' to 9" @ 90°/90°, spare blades

2005 Koskovich Auto Omni Component Saw Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical.

Wood Truss Systems 765-751-9990

PHONE: 800-289-5627

Hain Quick Rafter Cutter

Location: AZ Price: $3,500.00 -2x4 and 2x6 to 45 Degrees Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Price-$19,000 FOB Denver CO. Contact: John Wood

303-249-7037

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

SAWS

May 18th, 2012 #05143 Page #7

Don’t Forget!

You Saw it in the

SAWS

Adverti$er

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

765-751-9990

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

•

2006 Alpine AutoMill SC 5 Blade Automated Saw

Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $59,900 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Koskovich Auto Omni Component Saw

Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900.

Wood Truss Systems 765-751-9990

Omega Round Web Saw

2006 TCT EZ Trimmer

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

PHONE: 800-289-5627

$64,700 FOB IN Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor with PC in enclosure for fully automated or manual part input, and catcher-side monitor. All powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet.

Minimum 4-angle cut 22" (17" in manual mode). 24' carriage, belt scrap conveyor included with long incline, spare enclosure, and all available spare parts. (approx. 12').

220v, 3ph power required.

Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 765-751-9990

cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 765-751-9990

2004 MiTek Cyber A/T

2002 Alpine AutoMill RS

Model 348A saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer.

The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $19,900 FOB KY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

SAWS

SAWS

2000 Alpine AutoMill RS Model 344V saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer.

The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $16,900 FOB KY. Wood Truss Systems 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

2007 Lauderdale Hamiltion Up-Cut Saw with Mango Plate Marker

Lauderdale Hamilton 24” Super Chop Up-Cut Saw. Mango Plate Marker with Touch Screen Computer. 10’ Infeed & 20’ Outfeed Roller Conveyor with Stands. Dust Collection System. $14,900 FOB LA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Wood Truss Systems 765-751-9990 inc.

MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

2004 DeSauw Desawyer 2000 Component Saw

NOW $55,755 $61,950 FOB: NY

May 18th, 2012 #05143 Page #8

Adverti$er UFPI Purchases Alabama-Based Manufactured Housing Supplier

GRAND RAPIDS, Mich.--(BUSINESS WIRE)--May. 16, 2012-- Universal Forest Products, Inc. (Nasdaq: UFPI) today announced that a subsidiary of the Company has purchased certain assets of Haleyville, Ala.-based MSR Forest Products, LLC, a supplier of roof trusses and cut-to-size lumber to the region’s manufactured housing producers.

The purchase was completed on May 16, 2012. The move allows Universal to enhance its capacity utilization and reduce costs as the Company merges its existing Haleyville, Ala., operations with the operations of MSR. In addition to its Alabama facility, MSR has a plant in Waycross, Ga., which also is a part of the transaction. In 2011, MSR had annual sales of $10 million.

“MSR has been a strong company that has grown its success with great determination and skill,” said Matthew J. Missad, CEO of Universal Forest Products, Inc. “However, with shrinking volume in the manufactured housing arena, it was difficult to maintain efficiencies and create profitable business. This move will benefit both companies. In addition, it allows Universal to underscore our commitment to maintain our leadership position in the industry in which we got our start, manufactured housing.”

“We will grow upon MSR’s long history of success and we will serve their customer base seamlessly, offering the quality and service for which Universal is known,” Missad added.

Five blade automated component saw that includes shaker pan and waste incline.

This saw cuts from 8 to 115 degree angles.

The minimum 90/90 cut is 14 inches and the shortest angle cut is 18 inches. The saw cuts 2x4 through 2x12 lumber up to 20 feet in length. OEM reconditioning in 2010.

TRUSS EQUIPMENT

2002 Mitek RoofGlider 14' x 100' Side Eject Roller Gantry System

Mitek RoofGlider 14' x 24" Diameter Roller Gantry (Trackless). (13) Slotted Top Tables with Pop-up Skatewheel Ejectors. Roof Truss Jig Hardware & Bridge Plates. Roller Gantry Park Sections. 6 Powered Rollers, 6 Idle Rollers & 6 Receivers. Mitek 14' x 24" Diameter Finish Roller. $49,400 FOB CA Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ For more WizardPDS® Information visit: http://eideintegratedsystems.com/ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

TRUSS EQUIPMENT

2006 Koorsen Plate Detector

Truss plate detector significantly reduces field repairs by indicating missing connection plates. Features adjustable height and missing plate alarm. Button controls on stand-alone console. +/- Footprint dimensions. 17’ x 3’ x 5’. Compatible with any type of truss roller. 110 volt, 1 phase electrical. $6,800 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Said Richard Roberson, managing partner of MSR: “We entered into this agreement because we knew our valued customers would be well-served by Universal, which has grown its reputation for delivering excellence over nearly six decades. This is the right move for the industry, for our company and for the customers we’ve proudly served for so many years.”

Roberson and another MSR principal, Eddie Gamble, will stay on as consultants to the Universal operation for five years.

UNIVERSAL FOREST PRODUCTS, INC. Universal Forest Products, Inc. is a holding company that provides capital, management and administrative resources to subsidiaries that design, manufacture and market wood and wood-alternative products for DIY/retail home centers and other retailers, structural lumber products for the manufactured housing industry, engineered wood components for residential and commercial construction, specialty wood packaging and components for various industries, and forming products for concrete construction. The Company's consumer products subsidiary offers a large portfolio of outdoor living products, including wood composite decking, decorative balusters, post caps and plastic lattice. Its lawn and garden group offers an array of products, such as trellises and arches, to retailers nationwide.

Universal’s subsidiaries also provide framing services for the site-built construction market.

Founded in 1955, Universal Forest Products is headquartered in Grand Rapids, Mich., with operations throughout North America. For more about Universal Forest Products, go to www.ufpi.com.

This press release contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act, as amended, that are based on management’s beliefs, assumptions, current expectations, estimates and projections about the markets we serve, the economy and the company itself. Words like “anticipates,” “believes,” “confident,” “estimates,” “expects,” “forecasts,” “likely,” “plans,” “projects,” “should,” variations of such words, and similar expressions identify such forward-looking statements. These statements do not guarantee future performance and involve certain risks, uncertainties and assumptions that are difficult to predict with regard to timing, extent, likelihood and degree of occurrence. The Company does not undertake to update forward-looking statements to reflect facts, circumstances, events, or assumptions that occur after the date the forward-looking statements are made. Actual results could differ materially from those included in such forward-looking statements. Investors are cautioned that all forwardlooking statements involve risks and uncertainty. Among the factors that could cause actual results to differ materially from forward-looking statements are the following: fluctuations in the price of lumber; adverse or unusual weather conditions; adverse conditions in the markets we serve; government regulations, particularly involving environmental and safety regulations; and our ability to make successful business acquisitions. Certain of these risk factors as well as other risk factors and additional information are included in the Company's reports on Form 10-K and 10-Q on file with the Securities and Exchange Commission.

Source: Universal Forest Products Universal Forest Products, Inc. Lynn Afendoulis Director, Corporate Communications (616) 365-1502

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #9

Don’t Forget!

Wood Truss Systems

You Saw it in the

Adverti$er

inc.

765-751-9990 www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

R P ed r u ice ct io n

Combining the qualities and expertise you should expect from an industry supplier

2005 Robbins No-Rail Gantry

14'x180' trackless gantry with aisles. Includes (2) gantry heads, (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive. System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 440v, 3phase. Seller is willing to sub-divide this system. $79,000 NOW $59,000 FOB TX

PA

2008 IBS Yard Barn Wall Panel Line

FO

B

-

$24,900 FOB MI

Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI

2004 Ruvo 925 Door Machine

Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA

2005 (8) Projector SL Laser System

R P ed r u ice ct io n

Eight-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.

$62,600 :: FOB AZ Condition: Good 2005 Koskovich Auto Omni $52,900 FOB UT

NOW $49,900

Fax: 765-288-9991 PHONE: 800-289-5627

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

Phone: 765.751.9990 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

800-382-0329

May 18th, 2012 #05143 Page #10

TRUSS EQUIPMENT

www.wasserman-associates.com

2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta

-32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase

8

Wood Truss Systems 765-751-9990 inc.

MANUFACTURERS’ REPRESENTATIVES

Tee-Lok Trackless Floor Truss System

Trackless floor truss press includes gantry head with 20 inch diameter roll, 6' x 45' steel table (42' working length). Builds from 12" to 27" deep trusses, up to 42 foot long. Gantry has toggle forward / reverse & panic-stop controls. 220 volt, 3 phase electrical. $18,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

TRUSS EQUIPMENT Klaisler Finish Roller Press

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

Hundegger SC-1 $310,000 FOB NY

Model SC 1 saw includes vertical finger mill with 5.5 kW router motor, 40mm end mill., 25.5" diameter blade, 12.3 HP, 1480 RPM saw motor, and REA 16 pin, single-head ink-jet print option.

System includes Hundegger extended infeed deck with OEM automated clamping system which includes pressurized horizontal and vertical clamps that hold and straighten twisted, bowed, and curved lumber; outfeed framework: gripper wagon is mounted – rack and pinion system. Saw is a computer numeric controller (CNC) saw capable of cutting a wide range of roof, floor, and wall framing components, including I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam.

The saw can also cut 2x dimensional lumber stacked up to four pieces deep. Hundegger's Whole House Saw quickly and efficiently processes all types of cuts and profiles used in house construction. Comes with operator console, flat screen monitor, and industrial keyboard, Hundegger computer loaded with Windows XP/built in LAN card, and electronics cabinet which is A/C climate-controlled. Complete with waste conveyor system and incline, The SC 1 is upgradeable by OEM. OEM maintenance program, tech support and expert installation available at additional cost. 480 volt, 3 phase power.

PHONE: 800-289-5627

2002 MiTek Tee-Tracker Gantry System

14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Read/Subscribe online at www.componentadvertiser.com

Klaisler TR214-24 Features two 5 HP motors with a frequency drive, two 24 inch diameter rolls, 14 foot wide throat, push button controls, emergency stop, safety bars and limit switches. 230/460 volt, 3 phase electrical. $8,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 MiTek Railrider Floor Machine

Model 82500-502, 24 inch diameter gantry head with riding platform and push-button controls. Machine builds floor-trusses to 42 foot working length (54 foot overall length) truss depth capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, plate storage along table edge. Includes all available hardware. 230 volt, 3 phase electrical. $39,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Adverti$er

SA

May 18th, 2012 #05143 Page #11

alter & ssociates

Engineered Wood Products Industry

Klaisler 6-40 Traveling Floor Machine

Tee-Lok Side-Eject 24" dia Gantry

Truss Equipment Installation Consulting

770.434.1006 www.salter.com

LD

H

R P u ed r g u ice e ct io n

165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware.

System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

SO

1999 Alpine Mighty Mite Truss Assembly System

-5’ x 20’ Table (needs new wood top) -(2) 4” Diameter Hydraulic Cylinders at 31,000 Lbs Each -240 Volt / 3 Phase / 5 HP Motor. $7,900 NOW $6,900, NOW $5,900 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Page 7 No Change...

04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform.

24 roll -10HP motor w/electric softstart. Item F1026 Truss Machinery Connections 800-580-6430

PHONE: 800-289-5627

2006 MiTek TK-8 Clamp System

MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 765-751-9990

2005 Koskovich Jet-Set

23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990

2001 Alpine (100’) Floor Track Gantry System #2 2001 Alpine (100’) floor track 2001 Alpine (100’) floor track gantry gantry system / (1) system / (1) 7.5 HP 24” gantry head / Model 705 / SN 705A1007/ (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL S22,000

7.5 HP 24” gantry head / Model 705 / SN 705A1006 / (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase. FOB FL.

2001 Alpine (100’) Interior Exit Conveyor System

TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press

2001 Alpine (100’) interior (14’ x 6” diameter x 1” shaft) steel roller conveyor system / spaced 6’-0” on center / (9) powered rollers / (10) idle rollers (14) receiver arms for side “A” roof truss table and (14) receiver arms for side “B” roof truss table / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL

Read/Subscribe online at www.componentadvertiser.com

6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase .

FOB GA $14,500

FAX: 800-524-4982

M ACdverti$er anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

8

R P ed r u ice ct io n

omponent

May 18th, 2012 #05143 Page #12

Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

$14,900

North American solid wood prices last week continued their inexorable climb of late. The shock of a sudden decrease in stud production after the loss of the Lakeland stud mill to a catastrophic explosion at the end of April has worked its way through the lumber market. The reality of very low inventories throughout the supply chain is finally impossible to deny. Even last week customers had to call around to several sources to find the exact product mix they were looking for, causing emboldened producers to push prices up even higher.

It was demand out of the US, particularly for multi-family building, that was driving the price increases. Again it was wides, particularly 2x10’s, that had the sharpest increases.

800-382-0329

1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System

$33,500 FOB SC

8 2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted). Slotted Top Tables with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers. Tee-Lok 14’ Finish Roller. Dismantled & Stored in Early 2011. Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™

SO

LD

2005 Robbins "No Rail" Roller Gantry System $72,000 NOW $69,000 FOB TX

- 14’ x 130’ System with 2 Roller Gantries -2005 Robbins "Super Torque" 14' x 24" Diameter Roller Gantry (Trackless) -Slotted Top Tables with Pop-up Skatewheel Ejectors -Roof Truss Jig Hardware -Roller Gantry Park Sections -Powered Transfer Roller -Excludes Powered Exiting Conveyor & Finish Roller (available at additional expense) Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

PHONE: 800-289-5627

Benchmark WSPF KD 2x4 R/L prices rose $4 to US$304 mfbm, an $86 -- or 28 per cent -- increase over the same time last year. 2x10’s, meanwhile, popped up $24 to US$354, a $94 -- or 27 per cent -- gain over last year.

The approaching close of the current futures contract, on May 15, forced futures prices to rise. Futures had been lingering below cash price levels for most of the May contract, so picked up value through last week to correct for the price discount. By the May 15 close, futures matched cash exactly at US$304 mfbm.

Demand for studs continued fierce, in all species and regions.

WSPF KD 2x6 PET studs prices jumped $20 to end the week at US$345, a $95 -- or 28 per cent -- improvement over one year ago.

The run on studs resulted in price increases in the east as well.

ESPF KD 2x4 8’ studs rose $10 compared to the previous week, to US$410 mfbm. This is a $105 -- or 26 per cent -- hike over the same time last year.

Transportation provided little problems last week, apart from the usual grumbling about the monopoly railroad companies in Canada and their practice of taking long-mouldering rail cars out of storage and sending them to the mills unchecked. Only after these cars are loaded and sent on their way are maintenance issues discovered. Already running under tight schedules and growing order files, staff at sawmills could only grind their teeth as the wood was unloaded, the cars greased up, tightened up, cleaned up, then reloaded to finally get on their way.

With no other railroads serving many remote Canadian communities, there is little these sawmills can do about this seemingly relentless situation.

Dimension Lumber Key Prices

For this week’s prices subscribe to Madison’s at www.madisonsreport.com

Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16

Read/Subscribe online at www.componentadvertiser.com

Last Week $304 $294 $292 $354 $345 $255 $315 $410 $220

Change +4 +2 +2 +24 +5 +5 0 +10 +5 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

May 18th, 2012 #05143 Page #13

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Adverti$er

Wood Truss Systems

inc.

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

Design your own custom roof truss gantry!

$68,140 FOB TN & TX

R P ed r u ice ct io n

Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution.

Wood Truss Systems 765-751-9990

2006 MiTek Infeed Deck

2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity.

Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 765-751-9990

1994 (50') Robbins Roof Truss Gantry

1997 Pacific Automation Auto-8 (40’) Truss Press

-8' x 40' Drilled & Tapped Steel Table -50 Ton Hydraulic Press -24" x 96" Platen -Floor Truss Jig -Press 2x4 and 4x2 with no adjustment. $29,500 FOB ID. NOW $13,900 Wasserman & Associates 800-382-0329

2002 Tee-Tracker System

MD Super Torque / 10 HP / 7 ea. (5’x14’) steel tables with 2x6 underlayment and 1” dense plastic top / Includes (4) ea. uni-strut channels per table /(1) ea. pop-up skate roller per table / (6) Receiver arms / No Exits rollers / 15 ea. 24’x16”x1’ bridge plates / (65’) floor track / 230 volts 3 phase. $15,000 FOB GA Salter Associates 770-434-1006 www.salter.com

14' X 96' side-eject, trackless system complete with (16) 6' X 14'slotted, 3/4" steel-top tables w/ ejectors, (38) outfeed conveyors (190’ @ 5’ o.c.), two (2) MiTek TeeTracker Gantry heads (14' X 24" dia.) featuring riding platform, electrical supply mast, Demag Gmb motor and drive components with Auto-Lube, complete with 14’ X 24" dia. final roller.

System includes park stations and all available hardware with some spare drive wheels, etc. 240v, 3ph, 60Hz.

8 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

TRUSS EQUIPMENT

2005 MiTek RailRider End Eject Floor Machine

Tee-Lok 14' x 24" Diameter Finish Roller plus 4 Sections of Idle Conveyor

End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks.

Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 765-751-9990

-Two 5 HP Motors -Conveyor Section: 6'-6" x 12-0" x 33 1/2" FOB AZ - $6,500.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2 0 0 3 R o b b i n s " S u p e r To r q u e " 14' x 24" Diameter Finish Roller -230 Volt / 3 Phase -$9,900 FOB SK Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Wood Truss Systems

inc.

Adverti$er

TRUSS EQUIPMENT

TRUSS EQUIPMENT

1997 MiTek Tracked Gantry System (TN)

1996 MiTek Floor Truss Gantry System

Price: $32,900 :: FOB TN Condition: Good Category: Roof Truss Description: 86' x 14' side-eject gantry system with (11) plastic top tables with strut, with (1) model 6800 gantry roller, (+/- 75') interior conveyor and (+/- 75') exterior rollers. Includes all available system hardware and stand-alone receivers. Can be paired with the 2008 MiTek finish press for an additional $15,200.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

2001 Alpine Track Gantry Heads (Qty. 2 Only 1 left)

Combining the qualities and expertise you should expect from an industry supplier

2009 Stealth Trackless Gantry System (NY2)

Two (2) 24” diameter x 14’ throat, track gantry heads, 15’-0 ¾” rail centers, two available at this location. Price per each.

460 / 230 volt, 3 phase electrical.

Price: $6,900 ea. :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

n

e ic io r t P uc ed R

$81,900 NOW $55,755 FOB: NY

PHONE: 800-289-5627

Price: $13,900 :: FOB TN Condition: Good Category: Floor Truss Description: Model 66100 gantry with 24" dia. roller, builds trusses from 14" to 24" deep and up to 40' in length. Includes dual safety bars, pendant control and all available system hardware. $13,900 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 Pacific Automation Auto 8 Gantry System

8'x40' hydraulic press system specifically designed for smaller trusses. No finish press required, system includes single joystick control, operator platform and drilled / tapped, steel, table building surface. 50 ton press capacity. 230 Volt, 3 phase electrical. $10,990 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

WALL PANEL EQUIPMENT

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer

Stealth Peak-Up Stackers (2)

Two (2) Peak-Up, Four Receiver Stacker Systems with four (4) arms each. Features four (4) stacker horses (2 left and 2 right) for use with scissor trusses, HD Drive System, Auto Indexing and spring assisted receiver arms. Holds up to 30 trusses from 16’ to 60’ in length. Price is per stacker. $19,950 NOW $19,950 each FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

May 18th, 2012 #05143 Page #14

14' x 80' trackless side-eject gantry equipment with (10) all slotted-steel, continuoustop 6'-6" tables, (10) side ejectors. System features a 36" Stealth gantry roller, and (4) 14' transfer rollers, and with limited conveyor: (4) 14' inside pwr/idle conveyors, and (6) 14' outside conveyors. System was OEM refurbished in 2010, 460 volt, 3 phase power. OEM support and installation available.

Read/Subscribe online at www.componentadvertiser.com

2" Ball Coupler. Safety Chains with Hooks.

2,000 Lb Jack with Wheel. Wheel Fenders.

12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands.

Galvanized Rollers & Cross Members.

Stainless Steel Guide Pins on 16" Centers.

Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

May 18th, 2012 #05143 Page #15

Don’t Forget!

You Saw it in the

Adverti$er

765-751-9990

www.woodtrusssystems.com

800-382-0329

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

2009 Stealth Trackless Gantry System with Auto Puck System

$125,000 NOW $113,304

FOB NY 2004 IBS 12' x 16' Sheathing Table with Multi-Tool Bridge -26 Each - Senco FramePro 702XP Nail Guns -Plate Stitchers for Top & Bottom Plates -Bridge Tilt -Excludes Plant Net Computer/Enclosure 14' x 58' Trackless Gantry, Side-eject system with auto jigging system in a continuious all steel slotted top configuration. Featuring (12) Automated puck systems with system computer and stand, (8) 6'-6" table sections, (8) ejectors and (3) 14' transfer rollers. Includes one (1) trackless Stealth 24" diameter gantry roller, side-ejects to transfer roller leading to (12) 14' inside pwr/idle conveyors and (13) 14' outside conveyors. System includes a large 16' capacity Integrated Stealth finish press. 460 volt, 3 phase. System was OEM refurbished in 2010, continuing support and installation available.

WALL PANEL EQUIPMENT

WALL PANEL EQUIPMENT

$24,900 FOB AB

WALL PANEL EQUIPMENT

1999 Tee-Lok 40' Floor Truss Machine

$19,900 FOB SC Wasserman & Associates 800-382-0329

WALL PANEL EQUIPMENT 2004 Virtek LaserMC Wall Panel Cutting & Marking System

2005 Panels Plus Framing Table

Triad Wall Panel Line

Four (4) station line includes Generation II framing table 10' x 20' long, squaring table 10' x 16' long with router bridge, squaring table with sheathing bridge 10' x 16' long includes laser, & tilt option, to router bridge section, and transition/exit table; No gundollies included, air-guns not included.

120 volt, 3 phase electrical, 100 PSI air. $18,900 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

Panels Plus manual wall framer builds walls to 16’ length and from 8’ to 12' in height.

Includes 3-gun tool dollies each side, stud locaters, pop-up skate-wheel transfer, and motorized telescoping arms for adjusting wall height. Table also includes subcomponent layout tables and skate-wheel transition conveyor. (120v, 1ph, 100 psi air supply). Table is a trackless design for easy install. $15,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output -Vista Angle Boss Cut-Off Saw -20' Capacity -Left to Right Material Flow -Environmental Computer Enclosure with Computer/Monitor -Laser is burning light -Used for 2 years Location: KS, Price: $27,900.00 Wasserman & Associates 800-382-0329

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Read/Subscribe online at www.componentadvertiser.com

2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies

$10,900.00 FOB TN Wasserman & Associates 800-382-0329

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Don’t Forget!

You Saw it in the

765-751-9990

Adverti$er WALL PANEL EQUIPMENT

Combining the qualities and expertise you should expect from an industry supplier

2005 Viking ADT Wall Panel Framing System $37,990 FOB TX Panels Plus Manual Framer

Viking framing station with PreStage table and conveyors. Framing station model PS-Special, includes stud locators (16” & 24” centers), skate wheel ejectors, walk-through aisles, ½ HP motor and two (2) powered tool carriages.

Discharge speed of 12” per second. Once staged the framing sequence is event driven: guns fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4’-2”’ to 12’0” high, in lengths up to 20’ long. Includes two (2) 4’x 8’ plastic top setup tables, (1) set of 5’ wide x 10’ long skate wheel conveyors and (1) set of exit conveyors 24’ long.

System supported, and installation available from the OEM (Sold new for $132,000).

480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Guns not included.

16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 765-751-9990

PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker $22,500 FOB NE. NOW $17,900 Wasserman & Associates 800-382-0329

May 18th, 2012 #05143 Page #16

WALL PANEL EQUIPMENT

Wall Panel Equipment Accessories

$850 - 2006 Panels Plus Handle Bar Router $850 NOW $750 - Used Panels Plus 15' Skatewheel Conveyor with Stands (per Pair - 7 Pairs Available) $1,500 - 2005 Panels Plus Sub-Component Layup Tables $2,900 - Used Triad CN-4 Sub-Component Nailer $4,900 - 2004 Viking Fastrac 10' Portable Sheathing Bridge $145 Each - 2006 Associated Machinery 36" x 60" Material Carts - 7 Available $950 - NEW Wind Brace Saw for Wall Panel Metal Brace Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2007 Panels Plus Sub-Component Nailer

-Maximum Opening: 17" x 17 1/2" -On/Off Switches for Each Nail Gun -Button to Activate Squaring Stop -Foot Pedal to Activate Clamping -Excludes Nail Guns $7,500 FOB LA Wasserman & Associates 800-382-0329

NEED HELP WITH YOUR PANELS PLUS EQUIMENT? We offer:

Disassembly & packaging of equipment.

Installation by trained personnel.

Adjustment and calibration of equipment.

Training for operators and maintenance workers.

Recommend upgrade options.

Assistance in getting your fastening tools mounted and operational.

Contact Information:

email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Basic Automation 12' x 16' Interior/Exterior Wall Panel Line

Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge, Includes (25) Senco Staple Guns. $14,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

PHONE: 800-289-5627

Don’t Forget!

You Saw it in the

Adverti$er

Read/Subscribe online at www.componentadvertiser.com

May 18th, 2012 #05143 Page #17

FAX: 800-524-4982

omponent

anufacturing

You Saw it in the

TRUCKS & TRAILERS

Adverti$er

TRUCKS

&

TRAILERS

R P ed r u ice ct io n

TRUCKS & TRAILERS

Don’t Forget!

1994 Wabash T-30 Trailer

48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 765-751-9990

2008 Precision 42-60' Stretch Roll-Off Trailer (4001c)

Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1999 Western Star Truck with National 990 Crane

Model 4964F Truck with 20’-6” Flatbed.

475 HP CAT Engine. 8 Speed Manual Transmission. 215,885 Miles, National Model 990 Crane, Crane Capacity: 46,000 Lbs. 90’ Boom with Jib Option. $74,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

TRUCKS

TRAILERS

&

R P ed r u ice ct io n

M ACdverti$er

May 18th, 2012 #05143 Page #18

2003 Iron Steer 30' Gooseneck Roll-Off Trailer

-Model 12R30 -12,000 Lb Dexter Tandem Axles. -Bed Tilt -LED Lights $11,500 NOW $10,350 FOB NY Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Price Reduction

Page 15 No-Change ...

1997 Haulin 48' Roll-Off Trailer

2000 Raglan Trailer 48’

-Sliding Tandems -Hydraulic Neck -DOT is Current FOB IN, $5,900.00 Wasserman & Associates 800-382-0329 www.wassermanassociates.com

48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 765-751-9990

2004 Pratt 48' Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com

01 Haulin (Stretch 48 -70 ) $8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust.

Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430

1989 Western Star Boom Truck & Trailer Combo Price: $89,990 :: FOB WA Model 4964F boom truck, NTC 365 Cummins diesel engine, 18-speed transmission installed in 2008 (has only 5,000 miles on it), 1994 National Crane model 600C, 81 foot crane, recently refurbished at a cost of $10,000, 447,000 miles. 54,000 lb. GVWR. Includes one (1) custom built, peak-up truss trailer, with three axles, stake pockets, 1/4" thick steel wheel fenders, moveable light bars. Trailer can be purchased separately for $11,990.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

1995 Wabash 36'-50' Stretch Roll-Off Trailer

2005 Pratt 36'-50' Stretch Roll-Off Trailer

Sliding Tandems, Hydraulic Neck. $17,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

-Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires $9,900.00 FOB CO. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Read/Subscribe online at www.componentadvertiser.com

1999 Sterling Tractor

1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

TRUCKS

&

anufacturing

Don’t Forget!

You Saw it in the

TRAILERS

MISC.

Adverti$er

Wood Truss Systems inc.

May 18th, 2012 #05143 Page #19

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1997 PCS Hercules Auto-Feeder 1997 ASI 48-72' Stretch Trailer

Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329

g

Hain Powered Measuring Systems

in

-20' Hain Measuring System with Conveyor & Stands (No Infeed Conveyor) -15' Hain Measuring System with Infeed & Outfeed Conveyor & Stands $2,900 EA FOB NE Wasserman & Associates 800-382-0329

P

en

MISC.

1999 Holz-Her Accura "S" 14' Beam Saw

d

Price: $16,900 :: FOB TN Condition: Good Category: Trailers and Rolling Stock Description: ASI model 5AM stretch trailer from 48 to 72 feet, features sliding tandem axles, electric roll-off controls, fifth wheel connection and hydraulic lift.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Refurbished 2005 Hain 20Ft. Measuring System

2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet.

110 volt electrical.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

25 hp Sullair rotary screw air compressor, model LS-10. Rated 111 CFM @ 100 PSI. Also includes Sullair SR-175 dryer. The compressor is 230/460V and the dryer is 230V, 1 phase power. $8,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed.

460V, 3ph.

MISC.

MISC.

2006 Allison Material Carts

Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 765-751-9990

Virtek Laser Projection Heads

1999 Sullair LS-10 Compressor with SR Dryer

$4,499 FOB SC

QUANTITY ten (10) 4 red-laser heads (only) for up to 140 ft. projection @ 16' ceiling ht. Heads are model LPS-2D that were under OEM maintenance agreement since installation. Virtek license agreement required, OEM inspection required to obtain continuing maintenance agreement and installation. Contact us for serial number history per OEM records. $39,900 NOW $11,900 for all 4 FOB IN. Wood Truss Systems 765-751-9990

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Like New Altman Model 122 Dustless Sheetrock Saw

Call for Price. FOB NE. Wasserman & Associates 800-382-0329

Murphy-Rodgers MRT-9A Dust Collector

-Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums

Read/Subscribe online at www.componentadvertiser.com

$990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #20

Don’t Forget!

You Saw it in the

Adverti$er

Wood Truss Systems

765-751-9990

inc.

Price Reduction

800-382-0329

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

8

2006 Omni Miser Automated Material Picking System $89,000 FOB SD

-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000!

Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!

Click for WoodRunner Details: http://apexmw.com/ MISC.

2005 Williams Pulverizer

Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.

$8,000 FOB TN

MISC.

MISC.

1987 Jager TTS Auto Lumber Stacker $14,900 FOB NB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

MISC.

2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 MiTek Lumber Splicer

MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen.

Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

Lumber/Teeter Carts

-20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

MISC.

Don’t Forget!

You Saw it in the

MISC.

Adverti$er MISC.

Roller Table (16' x 5' x 32")

Mitek Lumber Splicer

HP Hydraulic System. 3" x 12" Maximum Plate Size (2x4 Material). Magnetic Platens for Plate Placement. Pneumatic Lumber Clamps. Foot Pedal Control for Clamping, Dual Push Button Control for Pressing. $4,750 FOB WY Wasserman & Associates 800-382-0329

A

inc.

MANUFACTURERS’ REPRESENTATIVES

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Door & Stair Equipment

Reconditioned RUVO Staircase Assembly Clamp

-Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Wood Truss Systems

May 18th, 2012 #05143 Page #21

NEW Strong Hold Topview Computer Cabinet

Location: OH Price: $4,900.00 -14' x 4' Capacity -Air Cylinder Clamping -16' x 4' Stair Clamp available at $5,400 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

26" Wide x 24" Deep x 66" High with 6" Legs. Polycarbonate Window. WeldedIn 12" Deep Keyboard Shelf. Three Point Locking System. Fan for Hot Air Evacuation. 2 Adjustable Shelves in Lower Cabinet. $950 FOB NE Wasserman & Associates 800-382-0329

Norfield Vertical Door Loader

2,800 Lb Capacity. 48" Stack Height 480 Volt / 3 Phase. $9,500 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

d

in

g

Door & Stair Equipment

en

Powered & Non-Powered Truss Rollers with Stands

Norfield 1020 Double-End Trim Saw

P

$350.00 Each - Powered (10 Available) $200.00 Each - Non-Powered (15 Available) 14' Long x 4 1/2" Diameter Rollers.

Adjustable Stands. 230/460 Volt/3 Phase 1/2 HP Motors . FOB SD. Wasserman & Associates 800-382-0329

2007 MiTek Ready Feed Live Deck

Auto-Feed live deck for component saw.

14' wide x 20'-6", 5 rails, safety-guarded sprockets, HD I-beam construction, footpedal control and adjustable height. Easily shipped and installed. 230V, 3 phase power. $7,500 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

MiTek PCS Component Express Conveyor M iTek / P C S C o m p o n en t Express conveyor, transfers wall subcomponents & parts between nailing stations and a framing station. Toggle controls, (2) 18” wide conveyors, 5 feet long each, included. 1 HP motor. 480 volt, 3 phase.

Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 765-751-9990

Your Ad Could be Here

$3,200.00 NOW $1,500 FOB TX

765-751-9990

Reconditioned 1999 Norfield 3800 LRO Door Lite Machine

Window Lite Cutting, Cylinder Lock Boring, Latch Drilling, Faceplate Routing, Overhead Template. $12,500 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

May 18th, 2012 #05143 Page #22

Job Opportunities

JobLine.com, inc.

The

800-289-JOBS

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL!

Truss Designers Needed in Alberta Canada NOW!

send your resume to mail@thejobline.com or

Immediate Search Position: Production Manager - Truss/Panel Location: Texas

Our client is looking for a small plant production manager. The ideal candidate will have experience working with 10-20 workers, be able to pick up slack in any department, know saws and equipment inside and out, and be willing to wear many hats. Must be computer literate, able to use email, word processing, excel, and data entry. Experience with MiTek MBA is a plus. Products include roof & floor trusses and wall panels.

Compensation: $45-60k base plus incentives.

ID: J10499

Immediate Search Position: Plant Operations Manager - Truss Location: Rocky Mountains

Operations/Plant Manager needed with 5+ years truss industry experience. Responsible for estimating, costing, purchasing design, administration and production. No sales responsibility. Plant size $3M+ Compensation: $75k+- (relocation assistance negotiable) ID: J10494

Register On~Line at www.thejobline.com Strictly Confidential!

Priority: Immediate Search Designer/Estimator Truss/Lumber Location: Texas

Designer/Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package estimating experience is a plus. Projects include commercial/ multifamily.

Compensation $45-55k (relocation assistance negotiable) ID: J10493

Your Ad Could be Here

bargain basement Priced to move - offers welcome 1998 JDH Trussmaster 36’-51’ Mini-Stretch Roll-Off Trailer Location: NE Price: $3,900.00 Hydraulic Front End | Sliding Tandems | Split Rollers | Brakes are 50% Needs New Tires | Needs New Bearings on 3 or 4 Rollers -Has some Frame Cracks 1998 Triad “GEN II” 10’pending x 24’ Interior/Exterior Wall Panel Line (FOB MN) $12,900 Triad “GEN II” 10’ x 24’ Framing Table Triad “GEN II” 10’ x 24’ Sheathing Table with Double Tool Panel Bridge & Auto Return 2 Sections of 20’ Roller Conveyor Handle Bar Router Excludes Tool Dollies, Nail/Staple Guns & Gun Mounts/Trigger Pulls Used Klaisler 14’ x 62’ End Eject Roller Gantry System (FOB OH) $14,500 NOW $10,900 -Klaisler 14’ Roller Gantry (track mounted) -(8) Klaisler Tables with Plastic Tops -14’ Finish Roller 12 7 Manual Component Saws - $7,500 & Under $6,900 - FOB NE - 1989 TimberMill 6-20 Component Saw $7,500 - FOB NE - 1995 Clary Master 5 Blade Component Saw $7,250 - FOB AB - 1990 TimberMill 6-20 Component Saw $7,000 - FOB AZ - Mid-90’s Mitek Easy Set 1000 Five Blade Component Saw $5,500 - FOB MI - 1992 Mitek Easy Set 2000 Five Blade Component Saw $5,000 - FOB VA - Clary 4 Blade Component Saw $4,900 - FOB MT - Idaco Componamatic 4 Blade Component Saw 3 Used Lumber Splicers - $2,000 & Under (OH, IL & IA) Used Stair Clamp - FOB NE - $1,500 -Hydraulic Clamping - 240 Volt / 3/4 HP / 4 Amp Motor -(8) 9” High Side Clamps - 148” Frame Length - 34” to 50” Clamp Width NEW Wind Brace Saw for Wall Panel Metal Brace - FOB NE - $950 Used Idaco Webmatic 4 Blade Web Saw FOB: MN - $9,900.00 NOW $7,500 -Manual Angulation -16’ Capacity Waste Conveyor & Short Incline Conveyor to Adjacent Saw - 480 Volt/3 Phase Add $4,000 for 22’ Live Deck with 7’ Skatewheel Conveyor Extension Used Full House Assembler FOB: OK - $1,900.00 Assemble Interior & Exterior Doors & Jambs Height: Up to 8’-0” - Width: 1’-0” to 8’-0” -Excludes Staple Guns

Toll Free: 800-382-0329

www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #23

Don’t Forget!

You Saw it in the

Adverti$er

new equipment showcase

Job Opportunities

JobLine.com, inc.

The

800-289-JOBS

Introducing the:

Purlin Plunger

SET TRUSSES FASTER WITH PREDRILLED PURLINS 





Time To Hire?



We’re here when you need help! visit: www.thejobline.com

Pre-Drill & Mark Only 2-3 Hammer Blows (60d Nails) Purlins Reduce Field Labor by 25-30% Set Trusses Faster & More Accurate Reduce the Exposure to Jobsite Fall Hazards Pre-Drilled & Marked Purlins (Shown)

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL!

IMMEDIATE NEED!

Truss Production Manager SOUTH

I have a high level, confidential job opening for a production manager in the South. I need a candidate who can manage 100+- people, multiple shifts, purchasing, shipping, yard.

They are LEAN, highly productive, and have a top down commitment to a highly structured operation. You do not have to be trained in LEAN or Six Sigma but it helps.

You need to be willing to become a key part of that system and embrace the culture. No Cowboys!

Please inquire for more information. This is a highly confidential search and details will only be provided to qualified applicants.

The ideal candidate will be a take charge person, able to earn respect and trust, and be trusted to make the plant and the team successful.

Thom's Notes: This is a new client but a well respected company. The rules are a little different as they are not willing to disclose who they are at this point. You will have to trust my ability to get you in if you fit, or let you I know that you don't. No compromises, sorry... ID J1049

Visit us at www.SQ-1Design.com

Specifications and Gallery 

Multi head, (3) 1/2HP industrial-duty drill head design allows for pre-drilling purlins from 4’up to 20’ in length with 5.6 sec. cycle time



Drill heads feature “quick stop” clamping for fast drill head location movement



Drill bit detection provides warning to operator in the event of drill bit failure



Features shaft driven infeed/outfeed material handling chain conveyor. Belt conveyor transfers drilled purlin to outfeed deck with auto-eject feature



Vertical and horizontal air clamping results in consistent and accurate hole placement



Touch screen PLC controls create user friendly operator interface for both manual and automatic operation



Automatic operation features material detection devices resulting in activating indexing of all sequences and transfer to outfeed material deck.



1ph. 230V power

Clamping

PLC Touch Screen Control

Drill Bit Sensor

Centerline Marking

Outfeed Deck

Outfeed Belt Conveyor

Outfeed Ejectors

Drill Head Adjustment

Sean Hubbard 317-440-2804 Sean@SQ-1Design.com Fax 320-210-4237

Jay Bunyard 317-354-5438 Jay@SQ-1Design.com Fax 320-210-4237

Catch us on thejobline.com

Scan our QR code to view our latest video http://www.youtube.com/watch?v=78A3uIJGj4U

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #24

Don’t Forget!

You Saw it in the

Adverti$er

new equipment showcase

Job Opportunities

JobLine.com, inc.

The

Automated Jigging System

800-289-JOBS

AUTOMATE YOUR ROOF TRUSS LINE WITHOUT MOVING A TABLE

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL!

OPTIMIZER - TRUSS MULTIFAMILY & LIGHT COMMERCIAL

AUTOMATE

SETUP TRUSS PROFILE IN 60 SECONDS OR LESS

RETROFIT ANY ROOF TRUSS TABLE; WOOD, PLASTIC OR STEEL MINIMIZE DOWNTIME,

ONSITE INSTALLATION SAVES THOUSANDS OF DOLLARS AS OPPOSED TO OTHER RETROFIT SYSTEMS

THE LEAST EXPENSIVE DUAL PUCK RAIL SYSTEM ON THE MARKET, GIVES YOU A COMPETITIVE EDGE

To learn MORE about MangoTech Automated Jigging visit us at www.MangoTech.com.au Contact us at Sales@MangoTech.com.au or 866-GO-MANGO

We are looking for someone that can hit the ground running doing cutting/engineering review. It is very detailed work. The staff we have doing this task looks at each truss design to insure that it meets all company rules and standards for our engineering and manufacturing requirements. We take this to a much higher level than most other fabricators. We want to build the best design possible without adding too much material or cost while providing our customers the best trusses at a competitive price.

This is a very detail oriented job and has little involvement with the truss layouts, primarily the individual designs.

Please inquire for more information. ID: J1048

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Your Ad Could be Here

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #25

Don’t Forget!

Adverti$er

You Saw it in the

new equipment showcase

On the Cutting Edge...

New! Porta Field Press

New! Roll Splicer

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Phone: 530.295.8068

Fax: 530.295.0468

Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672

Features: • • • • • • • •

Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area

Call 770-434-1006 For Details Salter & Associates www.salter.com

We go to any lengths to expand your opportunity.

PHONE: 800-289-5627

Features: • • • • • • • •

Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place

This Space is Available Call 800-289-5627 x1 or email

info@componentadvertiser.com

Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com

You find the opportunity -- we’ll build you the products to meet it.

Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

An

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Job Opportunities

JobLine.com, inc.

May 18th, 2012 #05143 Page #26

Don’t Forget!

You Saw it in the

Adverti$er

new equipment showcase

The

800-289-JOBS

800-382-0329 email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

@JobLine Business Development Manager Laminated Beams

Location: Texas Work with the Sales manager to determine commercial business potential in Texas and surrounding states. Build relationships with contractors, architects, designers, and business owners in the commercial industry using Glulam products; responds to RFQs, sources take offs & shop drawings, prepare quote proposals & letters, estimates freight, generates bid documents, completes internal files, and manages orders & shipments for awarded bid.

ID: J10485

Design Manager/PE CET, AScT

PE, CET, AScT Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities..

The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family.

Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region.

Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here.

Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program.

Canadian CET or AScT, or Degreed Architectural or Civil Engineer preferred.

Detailed job description is available.

ID: 10486

PHONE: 800-289-5627

NEW Monet DeSauw Wood Finger Jointing Line

Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada.

Advantages: -Reduce Waste

-Positive Ecological Impact

-Produce Straight Material

$79,900 FOB MO

www.wasserman-associates.com

Immediate Search Estimator - Truss/Lumber Location: Texas

Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package design experience is a plus.

Projects include commercial, multifamily, government, and industrial.

Compensation $45-55k (minimal relocation assistance possible) ID: J10498

Priority: Immediate Search Outside Sales - Truss/Panel Location: DC/Metro

Looking for an Outside Sales rep in the DC/Metro market and surrounding areas who can bring $3-4M+ to the table. Floor Truss, Roof Truss, Wall Panels and EWP. This highly successful manufacturer has multiple plants and can easily handle all you can sell. Excellent reputation for quality, competitive pricing and on time delivery.

Manufactures Roof & Floor Trusses, Wall Panels and EWP. Compensation: $70k-+, 6 figures possible Thom's Notes: One of my top 5 employers.

Great benefits and outstanding advancement potential.

ID: J10496

Job Opportunities

Priority: Immediate Search Designer/Senior Designer Truss/Panel/I-Joist/EWP Location: Edmonton, Canada

Priority: Immediate Search Production Manager - Truss/ Panel Location: Midwest

This is a Job in EDMONTON CANADA

Direct production of wall components, roof and floor trusses and floor systems for custom, single family homes. Plant produces 175+- homes a year. reporting to this position are 8-15 production workers.

Responsibilities include production, scheduling, costing and purchasing 5-10+ years components experience required. Will consider move up if qualified.

I am looking for a high energy designer who is willing to learn and apply all aspects of truss, panel, I-Joist, and EWP design.

Experience required: 5+ years in component design plus JobLine skills evaluation above average. Primary duties include design, layout, optimization, and cutting/ production documents. Secondary duties include customer service. Skills required include MiTek software, AutoCAD, will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, framing components, I-joists, EWP, hardware.

Compensation: Salary from $45-75 CN depending upon experience and performance. Relocation is open to negotiation.

Thom's Notes: If you are a US Citizen, the employer will also consider your application. NO DEGREE REQUIRED! ID: J10497

Read/Subscribe online at www.componentadvertiser.com

Compensation: $45-60k base salary, plus bonus potential when profits return. Vehicle w/expenses provided. Average 45-50 hours per week in peak season. Company benefits package, bonus program, vacation plan, and 401k program are detailed in our Company Profile. Relocation assistance negotiable.

Thom's Notes: I need a true Operations/Plant Manager with career that doesn't require a major step back for this opportunity.

ID: J10041

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

May 18th, 2012 #05143 Page #27

Don’t Forget!

You Saw it in the

Adverti$er

Job Opportunities

new equipment showcase

765-751-9990

inc.

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

JobLine.com, inc.

The

800-289-JOBS

Combining the qualities and expertise you should expect from an industry supplier

WoodRunner by Apex Machine Works $114,900 FOB MN

8

email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Truss/Panel Designer

Location: New England Truss and wall panel design using MiTek software on single and multifamily projects.

Has to be able to hit the ground running with strong wall and truss skills. Ability to step into the desk and instantly use MiTek software is a non-negotiable requirement.

Compensation: base pay $45-55k+depending upon experience. Relocation is acceptable with reasonable expenses paid and is open to negotiation.

Job ID: 10482.

The WoodRunner is a revolutionary step forward in automated lumber retrieval systems. As a totally automated system, the WoodRunner eliminates the costs and limitations associated with manulally fed saws. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Mizer, Alpine's ALS and other linear saws. Click on the photo for additional images, a brief VIDEO, or to download a Brochure and a footprint layout for Wood Runner Miser Specs or Wood Runner Alpine ALS Specs.

Job Opportunities

Truss Designers & PEng.(s) Needed in SK & MB Canada NOW!

send your resume to mail@thejobline.com or

Register On~Line at www.thejobline.com Strictly Confidential!

PHONE: 800-289-5627

Sales/Plant/Design/Estimating Manager Are you a multi-tasker with the ability to grow sales, lead design, and manage operations for a plant that has potential to produce $20M? The job requires someone who has experience with total takeoff, design/layout/engineering using MiTek software, manufacturing operations, and managing multiple department while focusing on growing sales. The ideal candidate will have either been a GM or past owner, who came up through the business in manufacturing, design or sales. If this is a possible match for what you are looking for, let's talk!

Email to request information thom@thejobline.com

IMMEDIATE! Truss Optimizer(s)

Needed in Texas

NOW!

send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com Strictly Confidential!

@JobLine

Read/Subscribe online at www.componentadvertiser.com

IMMEDIATE OPENING Estimator - Truss

Location: Mid Atlantic We need a experienced Estimator for Single Family Custom, Commercial, and Multifamily truss, panel and EWP. Must have experience with MiTek eFrame for estimating or Sapphire software. Truss Design is not the main focus of this job.

Other pre-screening specifications apply Compensation: $20-26hr.+- +OT based on ability and experience. Relocation assistance is negotiable.

URGENT-NEED NOW! Designer - Truss

Priority: Immediate Search Location: Texas JobLine Senior Designer ranking or WTCA III certification, and MiTek software experience required for this position. Prefer someone with commercial and multifamily and having wall panel experience is a plus. $50-60k+- to start, relocation assistance negotiable.

ID: J10480 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Safety First!

Safety Meeting Topics From State Fund CA.

Types of Injuries How Workers Get Hurt

Accidents can happen anywhere and at any time.

Many workplace accidents and injuries can be prevented if workers know the causes of accidents and they are taught how to protect themselves to avoid injury. Although no one wants to get hurt at work, there are four major causes for injuries on the job.

Back injuries

May 18th, 2012 #05143 Page #28

Adverti$er Cómo se Lesionan los Trabajadores

Los accidentes pueden ocurrir dondequiera y en cualquier momento.

Muchos accidentes de trabajo pueden prevenirse si los trabajadores conocen sus causas y se les enseña cómo protegerse para evitar lesiones.

Aunque nadie desea sufrir una lesión en el lugar de trabajo, dichas lesiones se deben a cuatro causas primarias.

Lesiones de la espalda La causa número uno de lesiones en el lugar de trabajo es la sobrecarga física. Estas lesiones son ocasionadas al levantar objetos (cargas demasiado pesadas o levantamiento inadecuado), realizar un gran esfuerzo físico, intentar realizar demasiadas actividades, o al doblar o torcer la espalda. Para evitar lesiones de la espalda, aprenda y emplee técnicas adecuadas de levantamiento, nunca doble o tuerza la espalda al levantar o transportar objetos, haga uso de dispositivos mecánicos o pida ayuda a un compañero de trabajo.

The number one cause of on-the-job injuries is physical overload. These injuries are cause by lifting (too Golpes contra objetos heavy a load or lifting improperly), straining, overreaching, bending, and twisting. To protect your back against injury, learn and use proper La segunda causa más común de lesiones en el lugar de trabajo lifting techniques, never bend or twist while lifting or carrying, and son los golpes contra objetos. La mejor forma de protegerse contra whenever possible, use a mechanical aid or get help with the load from estos accidentes consiste en mantenerse alerta en torno a los peligros another worker. potenciales y usar el equipo de protección apropiado (cascos protectores, protección para los ojos, guantes). Esté consciente de su cuerpo y del Hitting or striking against espacio libre alrededor suyo. Mantenga una distancia prudencial al The second most common cause of worker injury is being hit by or agacharse o desplazarse por debajo de los equipos, o al pasar por pasillos hitting against an object. The best way to protect against these accidents de dimensiones reducidas. is to be alert to the potential hazards and to use appropriate protective Caídas equipment (hard hats, eye protection, gloves). Be aware of your body and the space around you. Give yourself enough clearance when passing Para evitar las lesiones debidas a caídas, apoye bien los pies sobre by or ducking under equipment or going through a passageway. el suelo y use zapatos con suelas antirresbalones. Camine con cuidado.

Falls

No camine de espaldas ni salte de un nivel a otro. Compruebe que lo que lleva cargado no le obstaculiza la visibilidad, y que el camino esté bien iluminado y sin obstáculos. Limpie los derrames o manchas de grasa y use los pasamanos al caminar por escaleras.

To avoid injuries from falls, be sure that your footing is firm and wear slip-resistant soled shoes. Watch where youre walking. Dont walk backward to direct equipment or leap from one level to another. Make sure you can see over the Accidentes con máquinas load you carry and that walkways are well-lighted and clear of obstacles. Clean up spills or grease spots and use handrails when La cuarta causa más común de lesiones en el lugar de trabajo la walking on stairs. constituyen los accidentes con máquinas, es decir, accidentes que se producen al ser atrapado por las piezas móviles de una máquina. Cuando Machine Accidents trabaje cerca de cualquier equipo móvil (máquinas rotativas, cintas The fourth major cause of on-the-job injury is machine-related transportadoras o prensas) use siempre protectores de seguridad, cubiertas accidents, that is, getting caught by moving machine parts. When working y procedimientos de bloqueo. Sólo use las máquinas para las cuales haya around any moving equipment (a machine that rotates, slides, or presses) recibido capacitación. Nunca tenga puesto joyerías ni ropa holgada que always use safety shields, guards, and lock-out procedures. Only work puedan prenderse en un equipo en movimiento. on a machine that you have been trained to use. Never wear jewelry or Manténgase alerta sobre los peligros a los que está expuesto en loose-fitting clothing that could get caught in the moving equipment. su trabajo, aprenda qué debe hacer para protegerse contra accidentes Be alert to the hazards you face on your job and learn what you y lesiones, y siga las pautas de seguridad establecidas en su empresa. should do to protect yourself against accidents and injuries and follow your companys established safety guidelines.

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #29

Don’t Forget!

You Saw it in the

Adverti$er

Used Equipment Wanted!

765-751-9990

Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw

or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329 www.wasserman-associates.com

Take Back Your Business Become More Competitive with:

  

Powerful Software High Quality Connector Plates Independent Established Supplier

All at a Great Price

For a software demonstration call 1-800-652-6050 www.keymark.com

Join the Southern Pine Partnership!

Since 1915

As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org

JobLine.com

The

, inc.

800-289-JOBS(5627)

Time to Hire?

Affordable

Recruiting & Testing

www.thejobline.com PHONE: 800-289-5627

This Space is Available Call 800-289-5627 x1 or email

info@componentadvertiser.com

Since 1992

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #30

Don’t Forget!

You Saw it in the

Adverti$er

Business Listings

JobLine.com, inc.

The

800-289-JOBS

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com Wood Roof & Floor Trusses Wall Panels Engineered Components

CAD Design

Gould Design, Inc. Designing to your needs... A. One Gould project at -a time.

Christopher President

Time To Hire?

We’re here when you need help!

www.thejobline.com

Designing to your needs... One project at a time

Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards Industry Leading Professionals at your fingertips Overall design department cost reduced, saving you $$$ Experienced with multiple industry design software suites Up to date with US & Canadian Building Codes

(772) 475-3583 - Call Today

cgould@goulddesigninc.com | www.goulddesigninc.com

Mylon Stark

Professional Services Anywhere, Anytime Component Manufacturing dverti$er Invest In Your People!

A

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Here's a partial list of services BPS will provide to your operations:

• • • • • •

Improve Your Net Profit ! 

• •

Time Standards

(R.E., S.U. & Man-Minutes also known as Houlihan Method)

Proper Production Efficiencies, Pricing , Scheduling



Supervisor & Leadership Development Safety Integration Development of Safety Committees Developing Personal Responsibility for Operational Success Workplace Safety & Health Training for "Best Practice" Application OSHA and MSHA-related Training and Education Jobsite and Facility Audits and Inspections Incident Investigations

888.519.4130 toll-free

Lean Manufacturing Practices All Areas Are Covered 50% Shop - 50% Office Manufacturing, Design,

Admin Practices

Sales and

Tailored for Your Company



605.220.2342 mobile

info@bigpicturesafety.com www.bigpicturesafety.com

Truss Shop Labor Tracking Software Easy to use Software Track Your Labor Efficiencies and Labor Cost

Todd Drummond Consulting, LLC www.todd-drummond.com

todd@todd-drummond.com

Phone 603-763-8857

20 Years in Truss Industry - 9th Year in Consulting Service - 50+ Clients

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Your Ad Could be Here 2”x3” or 3”x2” Single Card

$195 per YEAR! 3”x4” Double Card

$295 per YEAR! Sizes & Rates on-line

www.componentadvertiser.com

or call 800-289-5627 x 1

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

May 18th, 2012 #05143 Page #31

Don’t Forget!

You Saw it in the

Reader Response Form FAX to: 800-524-4982

Adverti$er

Business Listings

or email: info@componentadvertiser.com Name: ____________________________________________________

Your Ad Could be Here

Company: ______________________________________________

2”x3” or 3”x2” Single Card

Address: ______________________________________________

3”x4” Double Card

City:____________________________ State:______

$195 per YEAR! $295 per YEAR!

Zip:______

Sizes & Rates on-line

www.componentadvertiser.com

Phone: _________________________ Fax: ______________________

or call 800-289-5627 x 1

Email: ____________________________________________________ How would you like to be contacted?

Phone

Fax Check All that Apply Email List of Items you are interested in: List the Page # and Title of the item.

Page # Item Title ____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

____

______________________________________________

Would you like to be added to our subscription list?

PHONE: 800-289-5627

Yes:

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Would you like to be a Sponsor on our Reader Response Form?

This Column is Available for $125 a Month or $750 a YEAR! Call 800-289-5627 x 1 or Email info@componentadvertiser.com

No:

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982