Component Manufacturing Advertiser

A #

135

PUBLISHED WEEKLY March 16th 2012 #05135

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Manufactured Structures Industry

Inside: 2012 Showcase Entry page 4

World of Modular: page 6

Madisons Canadian Lumber Reporter: page 14

SFPA: ALSC Approves New Design Values... page 23

New Equipment Spotlight: page 29-33

JobLine Hiring Zone: page 29-35

Safety First Topics in English/Spanish: page 37

Business Directory: page 38

www.mii.com/MiTekAssurance

8 Page 2

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

Published Weekly

March 16th, 2012 #05135 Page #3

Are Unreasonable Expectations Stifling Your Bottom Line?

Editor/Publisher

Thomas McAnally tmcanally@componentadvertiser.com

Are Your Benchmarks Fact or Fantasy?

Do Your People Believe They Can Succeed?

Advertising

Thomas McAnally Position Available

by Thomas McAnally - Publisher

Subscriptions

Do you try to make everyone into a Superstar? Ask yourself if the goals you expect are reasonable, reaching a bit, or an ultimate goal that only a few superstars can reach.

Some managers set goals so high that only the superstars can reach them. They set ultimate goals to make sure people always have “room for improvement”. People are expected to get “as close as possible” to the ultimate goal and are measured by how much they missed the goal.

When too many reach the top, the bar is raised. Does this guarantee a continued improvement in everyone’s performance? No, sometimes just the opposite...

Renae McAnally

Distributed FREE

via e-mail subscription or on line at www.componentadvertiser.com

Everyone is not a superstar! Most employees are average with a few who need to improve or go somewhere else. At the top, the superstars are always the exception.

Employees who are continually measured against the superstar’s goals can get the feeling that they are not as important. Some people begin to wonder if they are doing their job to an acceptable minimum level. Imagine the mind-set of someone who finally knows they made the minimum grade...???

Download FREE and

subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk Copyright 2008-2009-2010 -2011-2012

Component Advertiser

PO Box 16685 Fernandina Beach, FL. 32035 no reproduction in whole or in part without permission from the component advertiser

Keeping everyone motivated and working as a team is necessary to staying focused on business, and not hiring replacements or cajoling disgruntled employees.

What are acceptable goals?

How do you and your employees measure performance?

My most productive and rewarded teams were motivated when everyone had a chance to meet or exceed their personal goals, called Standards of Performance. While some people just need to know they are doing their job at an acceptable level, others want the chance to beat their standards and earn additional rewards. If someone was under-performing and needs to go, continually missing their Standards of Performance is grounds for dismissal. Success is contagious and it’s easier to believe that you can be a success if your goals are within reach, and rewards take just a little more effort.

In future articles, I will discuss how Standards of Performance are used. Standards of Performance can be a great tool for managers to communicate an employee’s status, progress, or needed improvements.

eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above.

Member PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

2012 product showcase entry

Introducing the:

March 16th, 2012 #05135 Page #4

SAWS

Purlin Plunger

SET TRUSSES FASTER WITH PREDRILLED PURLINS 







Pre-Drill & Mark Only 2-3 Hammer Blows (60d Nails) Purlins Reduce Field Labor by 25-30% Set Trusses Faster & More Accurate Reduce the Exposure to Jobsite Fall Hazards Pre-Drilled & Marked Purlins (Shown)

Visit us at www.SQ-1Design.com

Specifications and Gallery 

Multi head, (3) 1/2HP industrial-duty drill head design allows for pre-drilling purlins from 4’up to 20’ in length with 5.6 sec. cycle time



Drill heads feature “quick stop” clamping for fast drill head location movement



Drill bit detection provides warning to operator in the event of drill bit failure



Features shaft driven infeed/outfeed material handling chain conveyor. Belt conveyor transfers drilled purlin to outfeed deck with auto-eject feature

Clamping

PLC Touch Screen Control



Vertical and horizontal air clamping results in consistent and accurate hole placement



Touch screen PLC controls create user friendly operator interface for both manual and automatic operation



Automatic operation features material detection devices resulting in activating indexing of all sequences and transfer to outfeed material deck.



1ph. 230V power

Drill Bit Sensor

2001 Omni Mini-Miser Saw

-Auto Live Deck -Inkjet Print System D (Two Faces & One Edge) -Installation Available (quote upon request) $10,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com

ASI B500 5 Blade Component Saw

Five blade saw that includes PC and cabinet and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut is 14 inches and the shortest angle cut is 18 inches. The saw cutsfrom 2x4 through 2x12 lumber up to 20 feet in length. Angles are set using digital readouts. Both the length and angle adjustments are power driven. $19,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Centerline Marking

Idaco Componamatic 4 Blade Component Saw

Outfeed Deck

Outfeed Belt Conveyor Scan our QR code to view our latest video http://www.youtube.com/watch?v=78A3uIJGj4U

PHONE: 800-289-5627

Outfeed Ejectors

Drill Head Adjustment

Sean Hubbard 317-440-2804 Sean@SQ-1Design.com Fax 320-210-4237

Jay Bunyard 317-354-5438 Jay@SQ-1Design.com Fax 320-210-4237

Read/Subscribe online at www.componentadvertiser.com

-Reconditioned in 2003 -Cuts 2x4 thru 2x12 from 12" to 24' -Powered Angulation & Carriage - B e l t Wa s t e & I n c l i n e C o n v e y o r -230 Volt / 3 Phase . $5,900 FOB ID. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

March 16th, 2012 #05135 Page #5

SAWS

8

2008 Spida Automated Truss Saw

Automated Stop & Automated Saw Rotation as directed by Truss Design Software. Digital LCD Touch Screen Monitor. Clamping Roller Table. Two Bag 3 HP Dust Collector. $26,250 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1998 MiTek Cyber Saw

SAWS

SAWS

SAWS

R P ed r u ice ct io n

Frame #072, Fully automated five-blade component saw. Cutting performed by 2-16” X 6HP, 2-20” X 6HP, 1-32” X 12.5HP. WITH Dell PC upgrade featuring touch screen controls for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 and 4x2. Lengths cut from 11 inches to 20 feet. Includes scrap conveyor with incline, out-feed skate-wheel conveyor, 6-flight Mitek live, in-feed deck, a complete, well maintained, OEM serviced automated saw. 220V/60Hz/3ph. $17,900 FOB SC. Wood Truss Systems 765-751-9990

2002 Hain Quick Rafter Cutter

Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw

-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 Mitek Cyber A/T 5 Blade Automated Component Saw Waste & Incline Conveyor. NOW $49,900 Includes $5,000 Parts Allowance. FOB AZ. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

2003 Delta 16" Radial Arm Saw

Delta 33-411 16" Radial Arm Saw. Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22".

Features "Turret Arm" construction which allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph power. $1,800 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

2012

WORLD OF

MODULAR

The World’s Largest Convention & Tradeshow for Modular Construction

ti o

n

Hilton Bonnet Creek, Orlando, FL | March 24 - 27, 2012

e

rec

ca u d

n o i it n og

n et working

g r o . www.modular

Page 6

innovation

t bi i h x e

s

M ACdverti$er omponent

anufacturing

R P ed r u ice ct io n

SAWS

2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw

Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329

Re Pri du ce ct io n

2002 Alpine AutoMill RS 5 Blade Automated Component Saw including Live Deck

Automated via Download or SemiAutomated via Touch Screen Input 19 Axes of Automation. Cut 2x3 thru 2x12 from 13” to 20’. Label Printer. 5 Chain Live Deck. Extra Set of Blades. Waste & Incline Conveyor. Self Dumping Hopper. $40,000 NOW $35,000 FOB WA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

March 16th, 2012 #05135 Page #7

Don’t Forget!

You Saw it in the

Adverti$er

On the Cutting Edge...

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Folding Measuring System (FMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

The Table Measuring System (TMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller version.

The Portable Measuring System (PMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

The Manual Measuring System (MMEA) adjusts quickly with a turn of a handle without changing the operator's position on the line.

2005 Koskovich Auto Omni Component Saw Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical.

Wood Truss Systems 765-751-9990

PHONE: 800-289-5627

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Phone: 530.295.8068

Fax: 530.295.0468

Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672 Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

March 16th, 2012 #05135 Page #8

Charles F. Dickerson, Inc. INTERNATIONAL AUCTIONEERS “When you want the Job done right!”

ATTENTION-ANNOUNCING

THE BIGGEST TRUSS MANFACTURING EQUIPMENT AUCTION IN THE SOUTHWEST! May 5, 2012-Saturday-9:00am 1776 Industrial Parkway-Van Alstyne, TX 75495 30-40 semi truck loads of “truss manufacturing equipment”-from various manufacturing areas-saws, rollers, blowers, racking/pallet & cantilevers, compressors, nail guns, complete exterior/interior wall panel assembly lines, auto eject systems, Mitek Roof Glider Gantry system, Tee Lok Gantry system, Alpine X-4 Component Saw (used 18 months), pallet jacks, tables, ”Live Deck” outside building, building materials, lumber, trim, attic stairs, tables, and Much, Much More!

For further information, contact in Texas: Donnie Cogdill cogdill@foxgal.com-575-644-6672 (NM#) Charles F. Dickerson, Inc, International Auctioneers-Office: 575-526-1106, Cell: 575-644-7445 E-mail: charles@cfdauction.com, Photos/List/Directions/Webpage: www.cfdauction.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

SAWS

March 16th, 2012 #05135 Page #9

Don’t Forget!

You Saw it in the

SAWS

Adverti$er

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

765-751-9990

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

•

2006 Alpine AutoMill SC 5 Blade Automated Saw

Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $55,000 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Koskovich Auto Omni Component Saw

Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900.

Wood Truss Systems 765-751-9990

Omega Round Web Saw

2006 TCT EZ Trimmer

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

PHONE: 800-289-5627

$64,700 FOB IN Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor with PC in enclosure for fully automated or manual part input, and catcher-side monitor. All powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet.

Minimum 4-angle cut 22" (17" in manual mode). 24' carriage, belt scrap conveyor included with long incline, spare enclosure, and all available spare parts. (approx. 12').

220v, 3ph power required.

Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 765-751-9990

cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 765-751-9990

2004 MiTek Cyber A/T

2002 Alpine AutoMill RS

Model 348A saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer.

The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $19,900 FOB KY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

SAWS

SAWS

2000 Alpine AutoMill RS Model 344V saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer.

The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $16,900 FOB KY. Wood Truss Systems 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

2007 Lauderdale Hamiltion Up-Cut Saw with Mango Plate Marker

Lauderdale Hamilton 24” Super Chop Up-Cut Saw. Mango Plate Marker with Touch Screen Computer. 10’ Infeed & 20’ Outfeed Roller Conveyor with Stands. Dust Collection System. $14,900 FOB LA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #10

Don’t Forget!

You Saw it in the

Adverti$er

Wood Truss Systems 765-751-9990 inc.

MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

2004 DeSauw Desawyer 2000 Component Saw

1995 Auto Omni Component Saw

$61,950 FOB: NY Five blade automated component saw that includes shaker pan and waste incline.

This saw cuts from 8 to 115 degree angles.

The minimum 90/90 cut is 14 inches and the shortest angle cut is 18 inches. The saw cuts 2x4 through 2x12 lumber up to 20 feet in length. OEM reconditioning in 2010.

SAWS

SAWS

Hain Quick Rafter Cutter

2003 Alpine Speed Cut Metra-Cut Centerline Saw with Speed Measure

Location: AZ Price: $5,500.00 -20' Speed Measure, Roller Conveyor & Stands -Turntable Air Brake Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Location: AZ Price: $3,500.00 -2x4 and 2x6 to 45 Degrees Wasserman & Associates 800-382-0329 www.wasserman-associates.com

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

1995 Auto Omni component saw, rebuilt in 2004. 5-blade automated saw includes shaker waste conveyor with factory side pans. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20' to 9" @ 90°/90°, spare blades

Price-$19,000 FOB Denver CO. Contact: John Wood

303-249-7037

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #11

Don’t Forget!

Wood Truss Systems

You Saw it in the

Adverti$er

inc.

765-751-9990 www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

R P ed r u ice ct io n

Combining the qualities and expertise you should expect from an industry supplier

2005 Robbins No-Rail Gantry

14'x180' trackless gantry with aisles. Includes (2) gantry heads, (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive. System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 440v, 3phase. Seller is willing to sub-divide this system. $79,000 NOW $59,000 FOB TX

PA

2008 IBS Yard Barn Wall Panel Line

FO

B

-

$24,900 FOB MI

Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI

2004 Ruvo 925 Door Machine

Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA

2005 (8) Projector SL Laser System

R P ed r u ice ct io n

Eight-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.

$62,600 :: FOB AZ Condition: Good 2005 Koskovich Auto Omni $52,900 FOB UT

NOW $49,900

Fax: 765-288-9991 PHONE: 800-289-5627

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

Phone: 765.751.9990 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

800-382-0329

March 16th, 2012 #05135 Page #12

TRUSS EQUIPMENT

www.wasserman-associates.com

2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta

-32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase

8

Wood Truss Systems 765-751-9990 inc.

MANUFACTURERS’ REPRESENTATIVES

Tee-Lok Trackless Floor Truss System

Trackless floor truss press includes gantry head with 20 inch diameter roll, 6' x 45' steel table (42' working length). Builds from 12" to 27" deep trusses, up to 42 foot long. Gantry has toggle forward / reverse & panic-stop controls. 220 volt, 3 phase electrical. $18,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

TRUSS EQUIPMENT Klaisler Finish Roller Press

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

Hundegger SC-1 $310,000 FOB NY

Model SC 1 saw includes vertical finger mill with 5.5 kW router motor, 40mm end mill., 25.5" diameter blade, 12.3 HP, 1480 RPM saw motor, and REA 16 pin, single-head ink-jet print option.

System includes Hundegger extended infeed deck with OEM automated clamping system which includes pressurized horizontal and vertical clamps that hold and straighten twisted, bowed, and curved lumber; outfeed framework: gripper wagon is mounted – rack and pinion system. Saw is a computer numeric controller (CNC) saw capable of cutting a wide range of roof, floor, and wall framing components, including I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam.

The saw can also cut 2x dimensional lumber stacked up to four pieces deep. Hundegger's Whole House Saw quickly and efficiently processes all types of cuts and profiles used in house construction. Comes with operator console, flat screen monitor, and industrial keyboard, Hundegger computer loaded with Windows XP/built in LAN card, and electronics cabinet which is A/C climate-controlled. Complete with waste conveyor system and incline, The SC 1 is upgradeable by OEM. OEM maintenance program, tech support and expert installation available at additional cost. 480 volt, 3 phase power.

PHONE: 800-289-5627

2002 MiTek Tee-Tracker Gantry System

14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Read/Subscribe online at www.componentadvertiser.com

Klaisler TR214-24 Features two 5 HP motors with a frequency drive, two 24 inch diameter rolls, 14 foot wide throat, push button controls, emergency stop, safety bars and limit switches. 230/460 volt, 3 phase electrical. $8,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 MiTek Railrider Floor Machine

Model 82500-502, 24 inch diameter gantry head with riding platform and push-button controls. Machine builds floor-trusses to 42 foot working length (54 foot overall length) truss depth capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, plate storage along table edge. Includes all available hardware. 230 volt, 3 phase electrical. $39,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

TRUSS EQUIPMENT

Adverti$er

SA

March 16th, 2012 #05135 Page #13

alter & ssociates

Engineered Wood Products Industry

Klaisler 6-40 Traveling Floor Machine

Tee-Lok Side-Eject 24" dia Gantry

165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware.

System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Truss Equipment Installation Consulting

770.434.1006 www.salter.com

Wood Truss Systems 765-751-9990 inc.

MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

Combining the qualities and expertise you should expect from an industry supplier

2007 MiTek RoofTracker Gantry System $117,600 FOB AL 14' x 120' trackless, sideeject gantry. Includes (15) 6'-10" x 14' slotted, 1/2" steel-top tables with (14) ejectors. Built to be easily retrofitted with Matchpoint Planx or Alpine C4 AutoSet jigging systems. Includes one (1) RoofTracker gantry head with a 24" dia. X 14' roll with joystick control, and riding platform (220 hours total). Complete with one (1) 2007 MiTek finish roller. Includes powered transfer roll, 26 inside conveyor (12 powered) / 16 outside conveyors, electrical mast, two (2) parking sections and all available system hardware. 230V, 3 ph electrical.

PHONE: 800-289-5627

2001 Alpine (100’) Floor Track Gantry System #2 2001 Alpine (100’) floor track 2001 Alpine (100’) floor track gantry gantry system / (1) system / (1) 7.5 HP 24” gantry head / Model 705 / SN 705A1007/ (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL S22,000

7.5 HP 24” gantry head / Model 705 / SN 705A1006 / (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase. FOB FL.

2001 Alpine (100’) Interior Exit Conveyor System

TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press

2001 Alpine (100’) interior (14’ x 6” diameter x 1” shaft) steel roller conveyor system / spaced 6’-0” on center / (9) powered rollers / (10) idle rollers (14) receiver arms for side “A” roof truss table and (14) receiver arms for side “B” roof truss table / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL

Read/Subscribe online at www.componentadvertiser.com

6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase .

FOB GA $14,500

FAX: 800-524-4982

M ACdverti$er anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

8

R P ed r u ice ct io n

omponent

March 16th, 2012 #05135 Page #14

Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

$14,900

North American dimension lumber prices last week took a brief lull in their upward movements of the past couple of weeks, while panel prices demonstrated an unstoppable upward momentum. Once again it was demand out of Asia, lead by China, for low grade dimension items which spurred prices progressively higher.

The price gap between standard construction grades and #3/Utility grades is closing to the point that customers in China will see the value of #2&Btr dimension lumber products and switch over. Normally at a $70 to $100 discount, last week WSPF KD 2x4 #3/Utility -- at US$250 mfbm -- were only $26 less than the standard #2&Btr grade.

800-382-0329

1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System

$33,500 FOB SC

8 2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted). Slotted Top Tables with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers. Tee-Lok 14’ Finish Roller. Dismantled & Stored in Early 2011. Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™

2005 Robbins "No Rail" Roller Gantry System

ce on i $72,000 Pr cti u NOW $69,000 d Re FOB TX

- 14’ x 130’ System with 2 Roller Gantries -2005 Robbins "Super Torque" 14' x 24" Diameter Roller Gantry (Trackless) -Slotted Top Tables with Pop-up Skatewheel Ejectors -Roof Truss Jig Hardware -Roller Gantry Park Sections -Powered Transfer Roller -Excludes Powered Exiting Conveyor & Finish Roller (available at additional expense) Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

PHONE: 800-289-5627

As savvy Asian customers realize that the reduced premium on higher grades presents a bargain, they will forgo the lower grades. Price pressure on #2&Btr, already acting to raise prices in response to increased demand for #3/ Utility, will serve to drive prices on those commodities higher. This situation has already occurred twice since China became a meaningful buyer of lumber in 2008. North American customers who may not have noticed the consistent increases in low grade prices across all species in the past couple of weeks will regret not having bought before this bounce.

WSPF KD 2x4 #2&Btr prices firmed up $3 over the previous week to land at US$276 mfbm, while their #3/Utility brethren popped $25.

It wasn’t just Western Spruce-Pine-Fir that experienced a run on lower grades; #3/Utility kiln-dried Douglas fir 2x4’s bounced $15.

Not to be outdone, panel products once again rose 11 per cent across almost all commodities and regions. The biggest winner was Canadian softwood plywood (3/8”-basis) out of Vancouver, which jumped 22 per cent, from C$271 msf in the second week of February to C$314 last week.

A continually undecided futures trading board is providing no indication of lumber cash prices going forward. The current contract expires March 15, with almost all interest already having moved into the May contract. At US$271 mfbm by market close Tuesday, futures prices are close enough to cash that nothing unusual is expected to happen prior to the March contract closing. All bets are off, however, on the May and especially the July contract. It appears that there is some extremely conservative hedging going on, because it is hardly possible that three months from now cash lumber prices will be the same as they were last week, and in mid-July it is ludicrous to think they will only be $10 higher than they are now.

Dimension Lumber Key Prices

For this week’s prices subscribe to Madison’s at www.madisonsreport.com

Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16

Read/Subscribe online at www.componentadvertiser.com

Last Week $276 $288 $272 $314 $280 $250 $315 $350 $215

Change +3 +9 +12 0 0 +5 +15 0 0 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

March 16th, 2012 #05135 Page #15

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Adverti$er

Wood Truss Systems

inc.

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

Design your own custom roof truss gantry!

Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution.

Wood Truss Systems 765-751-9990

2006 MiTek Infeed Deck

2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity.

Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 765-751-9990

$68,140 FOB TN & TX 2007 Alpine 15'-6" x 24" Diameter Finish Roller

1997 Pacific Automation Auto-8 (40’) Truss Press

-8' x 40' Drilled & Tapped Steel Table -50 Ton Hydraulic Press -24" x 96" Platen -Floor Truss Jig -Press 2x4 and 4x2 with no adjustment. $29,500 FOB ID. NOW $18,900 Wasserman & Associates 800-382-0329

2002 Tee-Tracker System

-Model 725M -15 HP Motor (208 Volt) -Safety Bars Wasserman & Associates 800-382-0329 www.wasserman-associates.com

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

14' X 96' side-eject, trackless system complete with (16) 6' X 14'slotted, 3/4" steel-top tables w/ ejectors, (38) outfeed conveyors (190’ @ 5’ o.c.), two (2) MiTek TeeTracker Gantry heads (14' X 24" dia.) featuring riding platform, electrical supply mast, Demag Gmb motor and drive components with Auto-Lube, complete with 14’ X 24" dia. final roller.

System includes park stations and all available hardware with some spare drive wheels, etc. 240v, 3ph, 60Hz.

8 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #16

Don’t Forget!

You Saw it in the

Adverti$er

TRUSS EQUIPMENT

2 0 0 3 R o b b i n s " S u p e r To r q u e " 14' x 24" Diameter Finish Roller

Wood Truss Systems 765-751-9990

TRUSS EQUIPMENT

-230 Volt / 3 Phase -$9,900 FOB SK Wasserman & Associates 800-382-0329 www.wasserman-associates.com

inc.

MANUFACTURERS’ REPRESENTATIVES

www.woodtrusssystems.com

R P u ed r g u ice e ct io n

Combining the qualities and expertise you should expect from an industry supplier

2005 Alpine RAM Trackless Gantry System $79.900 FOB IN

H

2006 MiTek TK-8 Clamp System

1999 Alpine Mighty Mite Truss Assembly System

MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 765-751-9990

Alpine RAM Easyrider 14' x 120' trackless, side-eject gantry system with (17) slotted-steel, continuoustop 7'-4" tables, table-top access operator platform and (2) parking stations. System features (2) model 756A Alpine trackless gantry rollers, a matching‘05 Alpine Final Roller, Skate-wheel receivers, and power/idle outfeed conveyor.

Page 7 No Change...

-5’ x 20’ Table (needs new wood top) -(2) 4” Diameter Hydraulic Cylinders at 31,000 Lbs Each -240 Volt / 3 Phase / 5 HP Motor. $7,900 NOW $6,900, NOW $5,900 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 MiTek RailRider End Eject Floor Machine

04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform.

24 roll -10HP motor w/electric softstart. Item F1026

End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks.

Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 765-751-9990

No change to content - Page 12

Truss Machinery Connections 800-580-6430

2005 Koskovich Jet-Set

23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990

Need a Finish Roller?

Robbins

Mitek

Jager Truswal

Pacific Automation s We have a wide selection of popular brands!

PHONE: 800-289-5627

Alpine CMF

Read/Subscribe online at www.componentadvertiser.com

2006 MiTek RoofTracker JSP System

14’ x 136’ trackless side-eject gantry.

Includes (17) 6’-10” x 14’ slotted, 3/4” steel-top Jet-Set Pro ready tables with ejectors (results in lower cost conversion to MiTek Planx, Wizard PDS, or Retrofit to Alpine C4 AutoSet). Includes two (2) model 63750-501 RoofTracker gantry heads each with a 24” dia. X 14’ roll w/joy-stick control, (1) model 68300 24” final roller.

System includes all air-manifold, jigging hardware, bridge-plates, etc. (conveyor seen in photos was previously sold with the opposite side system). 480V, 3 ph power. $149,900 FOB GA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

FAX: 800-524-4982

M ACdverti$er anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

TRUSS EQUIPMENT

TRUSS EQUIPMENT

P en d

in g

omponent

March 16th, 2012 #05135 Page #17

800-382-0329

2007 Alpine Model 759A FloorMaster 40' Floor Truss Machine

-24” Diameter Trackless Gantry -Powered Truss Flipping & Ejection -Clamp Cylinders Under Table - O n Ta b l e C h o r d S p l i c i n g -Overhead Plate Rack -10 HP Motor (208 Volt) -Floor Truss Depths from 12” to 24”

TRUSS EQUIPMENT

1999 Tee-Lok 40' Floor Truss Machine

$19,900 FOB SC Wasserman & Associates 800-382-0329

$46,900 FOB TN TRUSS EQUIPMENT

Hydro-Air Beaver B-80 Floor Truss Machine

1994 Pacific Automation Auto 8 Gantry System

8'x40' hydraulic press system specifically designed for smaller trusses. No finish press required, system includes single joystick control, operator platform and drilled / tapped, steel, table building surface. 50 ton press capacity. 230 Volt, 3 phase electrical. $10,990 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

$4,900 FOB IA Wasserman & Associates 800-382-0329

Wood Truss Systems

inc.

2001 Alpine Track Gantry Heads (Qty. 2)

Two (2) 24” diameter x 14’ throat, track gantry heads, 15’-0 ¾” rail centers, two available at this location. Price per each.

460 / 230 volt, 3 phase electrical.

Price: $6,900 ea. :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 MiTek Roof Tracker System

14' x 84' trackless side-eject gantry. Includes (11) 6'-4" x 14' slotted, 3/4" steel-top tables with ejectors. Includes one (1) model 63750-501 RoofTracker gantry head with a 24" dia. X 14' roll w/joy-stick control.

System includes all air-manifold, overhead tracked electrical system, limited jigging hardware, bridge-plates, two (2) parking sections. 460V, 3 ph power. $79,900 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

2009 Stealth Trackless Gantry System (NY2)

$81,900 FOB: NY

Your Ad Could be Here Stealth Peak-Up Stackers (2)

Two (2) Peak-Up, Four Receiver Stacker Systems with four (4) arms each. Features four (4) stacker horses (2 left and 2 right) for use with scissor trusses, HD Drive System, Auto Indexing and spring assisted receiver arms. Holds up to 30 trusses from 16’ to 60’ in length. Price is per stacker. $19,950 each FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

14' x 80' trackless side-eject gantry equipment with (10) all slotted-steel, continuoustop 6'-6" tables, (10) side ejectors. System features a 36" Stealth gantry roller, and (4) 14' transfer rollers, and with limited conveyor: (4) 14' inside pwr/idle conveyors, and (6) 14' outside conveyors. System was OEM refurbished in 2010, 460 volt, 3 phase power. OEM support and installation available.

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

Don’t Forget!

You Saw it in the

765-751-9990

Adverti$er

March 16th, 2012 #05135 Page #18

WALL PANEL EQUIPMENT

WALL PANEL EQUIPMENT

Triad Wall Panel Line

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

2009 Stealth Trackless Gantry System with Auto Puck System

$125,000 FOB NY

Four (4) station line includes Generation II framing table 10' x 20' long, squaring table 10' x 16' long with router bridge, squaring table with sheathing bridge 10' x 16' long includes laser, & tilt option, to router bridge section, and transition/exit table; No gundollies included, air-guns not included.

120 volt, 3 phase electrical, 100 PSI air. $18,900 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

14' x 58' Trackless Gantry, Side-eject system with auto jigging system in a continuious all steel slotted top configuration. Featuring (12) Automated puck systems with system computer and stand, (8) 6'-6" table sections, (8) ejectors and (3) 14' transfer rollers. Includes one (1) trackless Stealth 24" diameter gantry roller, side-ejects to transfer roller leading to (12) 14' inside pwr/idle conveyors and (13) 14' outside conveyors. System includes a large 16' capacity Integrated Stealth finish press. 460 volt, 3 phase. System was OEM refurbished in 2010, continuing support and installation available.

2006 Panels Plus 12’ x 16’ Combination Framing/Sheathing Table

$36,900 FOB TX

800-382-0329 PHONE: 800-289-5627

Combination Framing/ Sheathing Table with Powered Height Adjustment Stud Locators, Pop-up Skatewheel Conveyor & Adjustable Stop on Framing/ Sheathing Table 3 Gun Tool Dollies Nail or Staple Bridge with Bridge Tilt Tool Mounts at 6” O.C. with 3” Shift on Panel Bridge Excludes Nail & Staple Guns New price is $84,500

2" Ball Coupler. Safety Chains with Hooks.

2,000 Lb Jack with Wheel. Wheel Fenders.

12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands.

Galvanized Rollers & Cross Members.

Stainless Steel Guide Pins on 16" Centers.

Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

2005 Panels Plus Framing Table

Panels Plus manual wall framer builds walls to 16’ length and from 8’ to 12' in height.

Includes 3-gun tool dollies each side, stud locaters, pop-up skate-wheel transfer, and motorized telescoping arms for adjusting wall height. Table also includes subcomponent layout tables and skate-wheel transition conveyor. (120v, 1ph, 100 psi air supply). Table is a trackless design for easy install. $15,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2004 Virtek LaserMC Wall Panel Cutting & Marking System

-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output -Vista Angle Boss Cut-Off Saw -20' Capacity -Left to Right Material Flow -Environmental Computer Enclosure with Computer/Monitor -Laser is burning light -Used for 2 years Location: KS, Price: $27,900.00 Wasserman & Associates 800-382-0329

Read/Subscribe online at www.componentadvertiser.com

2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies

$10,900.00 FOB TN Wasserman & Associates 800-382-0329

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Don’t Forget!

You Saw it in the

765-751-9990

Adverti$er WALL PANEL EQUIPMENT

Combining the qualities and expertise you should expect from an industry supplier

2005 Viking ADT Wall Panel Framing System $37,990 FOB TX Panels Plus Manual Framer

Viking framing station with PreStage table and conveyors. Framing station model PS-Special, includes stud locators (16” & 24” centers), skate wheel ejectors, walk-through aisles, ½ HP motor and two (2) powered tool carriages.

Discharge speed of 12” per second. Once staged the framing sequence is event driven: guns fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4’-2”’ to 12’0” high, in lengths up to 20’ long. Includes two (2) 4’x 8’ plastic top setup tables, (1) set of 5’ wide x 10’ long skate wheel conveyors and (1) set of exit conveyors 24’ long.

System supported, and installation available from the OEM (Sold new for $132,000).

480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Guns not included.

16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 765-751-9990

PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker $22,500 FOB NE Wasserman & Associates 800-382-0329

March 16th, 2012 #05135 Page #19

WALL PANEL EQUIPMENT

Wall Panel Equipment Accessories

$850 - 2006 Panels Plus Handle Bar Router $850 NOW $750 - Used Panels Plus 15' Skatewheel Conveyor with Stands (per Pair - 7 Pairs Available) $1,500 - 2005 Panels Plus Sub-Component Layup Tables $2,900 - Used Triad CN-4 Sub-Component Nailer $4,900 - 2004 Viking Fastrac 10' Portable Sheathing Bridge $145 Each - 2006 Associated Machinery 36" x 60" Material Carts - 7 Available $950 - NEW Wind Brace Saw for Wall Panel Metal Brace Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2007 Panels Plus Sub-Component Nailer

-Maximum Opening: 17" x 17 1/2" -On/Off Switches for Each Nail Gun -Button to Activate Squaring Stop -Foot Pedal to Activate Clamping -Excludes Nail Guns $7,950 FOB OH Wasserman & Associates 800-382-0329

NEED HELP WITH YOUR PANELS PLUS EQUIMENT? We offer:

Disassembly & packaging of equipment.

Installation by trained personnel.

Adjustment and calibration of equipment.

Training for operators and maintenance workers.

Recommend upgrade options.

Assistance in getting your fastening tools mounted and operational.

Contact Information:

email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

2007 Panels Plus 12' x 16' Framing Table with Tool Dollies

-(2) Three Gun Tool Dollies with Remote Fire & Clamp -Stud Locators at 16" & 24" O.C. -Pop-up Skatewheel Conveyor -Powered Height Adjustment -Adjustable Squaring Stops -(2) Pair of 15' Skatewheel Conveyor with Stands -Excludes Nail Guns FOB: LA - $16,950.00 Wasserman & Associates 800-382-0329

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

March 16th, 2012 #05135 Page #20

Don’t Forget!

Adverti$er 2008 Moffett Forklift & '96 Fruehauf 45' Flatbed Trailer You Saw it in the

Moffett model M80 BC forklift, 70 hours, 8,000 lb. capacity with fork extensions.

Fruehauf flatbed trailer is balanced for the lift. Ideal for wall panel deliveries.

$54,900 FOB MO

765-751-9990

www.woodtrusssystems.com

8 Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

MiTek PCS Component Express Conveyor M i Tek / P C S C o mp o n en t Express conveyor, transfers wall subcomponents & parts between nailing stations and a framing station. Toggle controls, (2) 18” wide conveyors, 5 feet long each, included. 1 HP motor. 480 volt, 3 phase.

$3,200.00 NOW $1,500 FOB TX

765-751-9990

www.woodtrusssystems.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

Adverti$er

You Saw it in the

TRUCKS & TRAILERS

TRUCKS

&

TRAILERS

TRUCKS

&

TRAILERS

R P ed r u ice ct io n

TRUCKS & TRAILERS

March 16th, 2012 #05135 Page #21

1994 Wabash T-30 Trailer

48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 765-751-9990

1999 Western Star Truck with National 990 Crane

2008 Precision 42-60' Stretch Roll-Off Trailer (4001c)

Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Model 4964F Truck with 20’-6” Flatbed.

475 HP CAT Engine. 8 Speed Manual Transmission. 215,885 Miles, National Model 990 Crane, Crane Capacity: 46,000 Lbs. 90’ Boom with Jib Option. $74,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2003 Iron Steer 30' Gooseneck Roll-Off Trailer

-Model 12R30 -12,000 Lb Dexter Tandem Axles -Bed Tilt -LED Lights $11,500 FOB NY Wasserman & Associates 800-382-0329 www.wassermanassociates.com

A

Component15 Manufacturing Page dverti$er No-Change ...

1992 JDH Trussmaster 48' RollOff Trailer

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Location: IL Price: $3,000 Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Price Reduction 01 Haulin (Stretch 48 -70 )

2004 Pratt 48' Roll-Off Trailer

2000 Raglan Trailer 48’

-Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com

48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 765-751-9990

We go to any lengths to expand your opportunity.

PHONE: 800-289-5627

$8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust.

Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430

You find the opportunity -- we’ll build you the products to meet it.

Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

An

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

March 16th, 2012 #05135 Page #22

TRUCKS

&

TRAILERS

800-382-0329 www.wasserman-associates.com

Truck & Trailer Values get You Rolling NOW! 2004 Moffett M5500 Piggyback Lift with 2002 Great Dane 42' Flatbed Trailer

FOB OH $17,900.00 2005 Pratt 36'-50' Stretch Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck

1999 Sterling Tractor

1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Kubota Diesel, 5500 Lb Capacity, 10' Mast, 1000 Hours, Pallet Forks, Side Shift, Tilt, Serviced w/50% Tires. 2002 Great Dane 42' Flatbed, 42' x 96", Headboard, Toolbox, Winches and Straps, Aluminum Wheels, DOT Inspected, Moffett Mount Kit.

-Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires

R P ed r u ice ct io n

$22,500 FOB OH.

1997 Ford LTL A9000 Truck -Engine: Series 60 Detroit 430 HP -12,000 LB Steer Axle -40,000 LB Rockwell Differentials 3:58 Gears -Transmission: 10 Speed RTLO 15610B

1997 Ford Truck with 2002 PM Knuckle Boom Crane

$49,900 FOB ND

-New Paint PM Crane Model 14024 -Dual Side Controls -40'-8" Reach

1995 Wabash 36'-50' Stretch Roll-Off Trailer Location: CO Price: $9,900.00

8

-400 Degree Rack & Pinion Rotation -Check Valves on All Cylinders -Overload Relief Valves -Hydraulic Load Limit Device -Dual Outriggers w/19'-8" Span -New Paint

2004 Volvo VNL64T300 Truck

-Engine: D12-435, 435 HP, 1550 Torque, 342,000 Miles -Transmission: ZF Meritor MO-15G10A-M15 -Tandem Axle, 40,000 Lb Rear Axle Capacity -3.73 Rear Axle Ratio w/Interaxle Diff. Lock -Wabco ABS Brakes & Exhaust Brake -200 Gallon Diesel Capacity -Day Cab with Aero Cab Package -Reference Photo 2 for PDF Photos

$37,500 FOB MO

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

1989 Western Star Boom Truck & Trailer Combo Price: $89,990 :: FOB WA Model 4964F boom truck, NTC 365 Cummins diesel engine, 18-speed transmission installed in 2008 (has only 5,000 miles on it), 1994 National Crane model 600C, 81 foot crane, recently refurbished at a cost of $10,000, 447,000 miles. 54,000 lb. GVWR. Includes one (1) custom built, peak-up truss trailer, with three axles, stake pockets, 1/4" thick steel wheel fenders, moveable light bars. Trailer can be purchased separately for $11,990.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the Contact: Richard Wallace 504/443-4464, ext.

236 rwallace@sfpa.org @Southern_Pine

Adverti$er MISC.

March 16th, 2012 #05135 Page #23

MISC.

FOR IMMEDIATE RELEASE March 15, 2012

ALSC Approves New Design Values for Southern Pine Dense and NonDense Lumber Effective June 1, 2012 As a follow up to its approval of new design values for visually graded No.2 and lower grades of 2x4 Southern Pine lumber in January, the American Lumber Standard Committee (ALSC) Board of Review has approved new design values for No.2 2x4 Dense and NonDense grades, with an effective date of June 1, 2012. This size category includes material that is 2 to 4 inches thick and 2 to 4 inches wide. In announcing its decision March 9, ALSC stated: “After consideration of all the information available to it, the Board approved the No.2 Dense 2 to 4 inches thick and 2 to 4 inches wide and No.2 Non-Dense 2 to 4 inches thick and 2 to 4 inches wide southern pine design values as submitted by SPIB on February 10, 2012 with a recommended effective date of June 1, 2012.”

“The new design values for No.2 Dense and No.2 NonDense apply only to Southern Pine lumber,” says Cathy Kaake, senior director of engineered and framing markets for the Southern Forest Products Association (SFPA). “Mixed Southern Pine does not have published Dense and NonDense grades,” she adds.

Minutes of the ALSC Board of Review’s March 9 executive session along with previous ALSC rulings are available on the New Design Values page of www.southernpine.com. Also available from this page is Supplement No.9 to SPIB’s 2002 Standard Grading Rules for Southern Pine Lumber, plus a revised table providing the new design values. An updated Questions & Answers document will be available soon.

BACKGROUND: The last major change for visually graded dimension lumber occurred in 1991 when design values for Southern Pine and other North American species were published based on InGrade testing of full-size samples of commercially produced lumber.

Since 1994, SPIB has conducted an annual resource monitoring program developed in collaboration with the U.S. Forest Products Laboratory (FPL). SPIB is the first rules-writing agency to submit proposed design value changes. Rules-writing agencies responsible for other species are in different stages for evaluating design values.

1999 Sullair LS-10 Compressor with SR Dryer

25 hp Sullair rotary screw air compressor, model LS-10. Rated 111 CFM @ 100 PSI. Also includes Sullair SR-175 dryer. The compressor is 230/460V and the dryer is 230V, 1 phase power. $8,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Refurbished 2005 Hain 20Ft. Measuring System

2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet.

110 volt electrical.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

-20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2003 Virtek LPS-6R Laser System

Complete information about Southern Pine design values is available at www.southernpine.com.

* * * * * * * * * * * * * * * * * * SFPA is a nonprofit trade association that has represented manufacturers of Southern Pine lumber since 1915.

Today, SFPA is the leading source of information about Southern Pine products for design/build professionals and consumers. www.southernpine.com www.sfpa.org @Southern_Pine

Wing Span Open: 20', Closed: 9 1/2' . Center Section: 7 1/2'. Wings: 6' . Front Skin: 10 Gauge. Rear Structure: 1/4" & 5/16".

Aeroquip Hydraulics. $8,500 Retail, Now $6,000 FOB ND. NOW $5,000 Wasserman & Associates 800-382-0329

Lumber/Teeter Carts

SFPA does not test lumber or establish design values. SFPA’s primary function is to market lumber products and to help users understand Southern Pine grading rules and design values.

*

NEW SnoVantage Skidsteer Snow Plow

1999 Holz-Her Accura "S" 14' Beam Saw

Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329

Read/Subscribe online at www.componentadvertiser.com

Virtek truss projection system, quantity of fourteen (14) model LPS-6R red-laser heads, with 16’ coverage each, system PC. Heads have been under OEM maintenance agreement since new, Windows 2000 PRO O/S, Virtek TrussLine version 4.4/1.118.

Virtek license agreement required, Virtek maintenance agreement suggested (call for additional cost estimates).. $6,195 and $4,950 each FOB OH. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #24

Don’t Forget!

You Saw it in the

Adverti$er

Wood Truss Systems

765-751-9990

inc.

Price Reduction

800-382-0329

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

8

2006 Omni Miser Automated Material Picking System $89,000 FOB SD

-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000!

Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!

Click for WoodRunner Details: http://apexmw.com/ MISC.

2005 Williams Pulverizer

Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.

$8,000 FOB TN

MISC.

MISC.

1987 Jager TTS Auto Lumber Stacker $14,900 FOB NB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

MISC.

2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Your Ad Could be Here 2004 MiTek Lumber Splicer

MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen.

Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems inc.

Don’t Forget!

You Saw it in the

765-751-9990

Adverti$er MISC.

March 16th, 2012 #05135 Page #25

MISC.

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1997 PCS Hercules Auto-Feeder

Like New Altman Model 122 Dustless Sheetrock Saw

Call for Price. FOB NE. Wasserman & Associates 800-382-0329

$4,499 FOB SC Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed.

460V, 3ph.

MISC.

Murphy-Rodgers MRT-9A Dust Collector

-Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums

$990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

MISC.

800-382-0329 2006 Allison Material Carts

Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 765-751-9990

Virtek Laser Projection Heads

QUANTITY ten (10) red-laser heads (only) for up to 140 ft. projection @ 16' ceiling ht. Heads are model LPS-2D that were under OEM maintenance agreement since installation. Virtek license agreement required, OEM inspection required to obtain continuing maintenance agreement and installation. Contact us for serial number history per OEM records. $39,900 NOW $29,800 FOB IN. Wood Truss Systems 765-751-9990

PHONE: 800-289-5627

Mitek Lumber Splicer

HP Hydraulic System. 3" x 12" Maximum Plate Size (2x4 Material). Magnetic Platens for Plate Placement. Pneumatic Lumber Clamps. Foot Pedal Control for Clamping, Dual Push Button Control for Pressing. $4,750 FOB WY Wasserman & Associates 800-382-0329

$8,250 FOB NY

Tell Them

You Saw it in the

Advertiser

Hain Powered Measuring Systems

-20' Hain Measuring System with Conveyor & Stands (No Infeed Conveyor) -15' Hain Measuring System with Infeed & Outfeed Conveyor & Stands $2,900 EA FOB NE Wasserman & Associates 800-382-0329

2010 Kaeser Model SK15 SIGMA Air Compressor with Kaeser Model KAD-60 Dryer

-Direct Drive Rotary Screw Compressor delivers 64 CFM at 125 PSI -Storage Tank -15 HP / 3 Phase Motor

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #26

Don’t Forget!

You Saw it in the

Adverti$er

Carolina Machinery Sales

Cresswood Model: EF-60-100

Voltage: 460V, 60Hz, 3Ph, This Cresswood wood grinder is powered by a 100 hp.

230/460 volt, 22.6-11.3 amp, three phase electric motor. Grinding head diameter is 16" and 60" length. Grinding head speed 300-600 rpm. equipped with 84 - 1 1/2" cutter teeth, 1 1/2" screen, with an input capacity of 7.5" X 60". Feed Rotor is powered by 5 hp 230/460 electric motor with 1" X 1" teeth. Feed is 5' long X 12" diameter. Left motor for feeder is 2 hp 230/460 electric motor, has controls. Good condition. Condition: Good Condition. $29,500 FOB Midwest. #3324 Contact Keith Comeau 704-288-1904 ext 106

Schutte Buffalo Model: 40 HZF

This Schutte grinder has been cleaned/ checked and comes with the 30' vibrating conveyor. The mill requires approx 100 HP motor (which may be available at the current location).

• Horiontal feed with bottom discharge • 30' Precision vibrating conveyor • Machine was replaced by a new Rotochopper grinder.

FOB NC #2364 Contact Ralph Viegelmann 704-288-1904 Ext 101

2005 Vecoplan Model: RG52/60 Shorty

Voltage: 460V, 60Hz, 3Ph Condition: Cleaned & Checked •52" Capacity •60 HP •15" rotor •New Cutters •3500 hours FOB Southeast US $54,900 #2962 Contact Chris Deal 704-288-1904 Ext 108

2005 West Salem Model: 62" Low RPM Grinder

Voltage: 480V, 60Hz, 3Ph Condition: Good Condition •Vertical Hopper 84" x 80" •62" width capacity •16" rotor •75 HP motor FOB Midwest #3561 Contact Chris Deal 704-288-1904 Ext 108

GRINDERS/HOGS

1996 Cresswood EF72-75

Voltage: 480V, 60Hz, 3Ph •72" wide capacity •75HP motor • Bottom auger discharge •Infeed vibrating table 72" x 12' •Control Box •Fluid Clutch •Rotary Rebuilt 2003 By Cresswood •8" Side Auger 4' Feed The machine was recently brought in cleaned, checked and all bad cutters replaced. Tested Under Power. $26,500 FOB Southeast. #2694 Contact Chris Deal 704-288-1904 Ext 108

1995 Weima Model: WL 4/S

As Taken From Service •Retech RG 32/20 •Hopper size: 32"x28" •6.5" Rotor •Approx weight: 1,900 Lbs FOB Southwest #2976 Contact Ralph Viegelmann 704-288-1904 Ext 101

Carolina Machinery Sales, Inc. 5919A Stockbridge DR Monroe, NC 28110 PHONE: 800-289-5627

2001 Vecoplan Model: RG 32/20

Voltage: 440V, 60Hz, 3Ph Condition: Good Condition •30 HP •Rotor Length - 600mm •Rotor Dia. - 368mm •Rotor Speed - 60 to 100 rpm •Weight 1700 lbs.

FOB Midwest #2287 Contact Chris Deal 704-288-1904 Ext 108

Williams Model: Hammermill

Voltage: 460V, 60Hz, 3Ph Condition: Good Condition •50 HP •includes hopper $7,500 FOB Southeast #3511 Contact Chris Deal 704-288-1904 Ext 108

Phone: 704-288-1904 Fax: 704-772-7620 www.carolinamachinerysales.com Email: info@carolinamachinerysales.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #27

Don’t Forget!

You Saw it in the

MISC.

MISC.

Adverti$er

Wood Truss Systems inc.

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

LD

Combining the qualities and expertise you should expect from an industry supplier

SO

2005 Hain Sub-Component Nailer

2005 Hain Sub-Component Nailer Model SCN - Sub-component assembler includes optional set up for coil fed nail guns. This model SCN handles 2x4 and 2x6 material and requires 100 PSI of air along with 120 volt electrical service. Includes automated off-feed system, ten foot long infeed and outfeed conveyors. System INCLUDES over 20 boxes of 10Dx.131 coil nails (4,600 nails per coil). $10,820 FOB MI. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Roller Table (16' x 5' x 32")

-Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

$8,250 FOB NY

2007 MiTek Ready Feed Live Deck

Auto-Feed live deck for component saw.

14' wide x 20'-6", 5 rails, safety-guarded sprockets, HD I-beam construction, footpedal control and adjustable height. Easily shipped and installed. 230V, 3 phase power. $7,500 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

A

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

NEW Strong Hold Topview Computer Cabinet

26" Wide x 24" Deep x 66" High with 6" Legs. Polycarbonate Window. WeldedIn 12" Deep Keyboard Shelf. Three Point Locking System. Fan for Hot Air Evacuation. 2 Adjustable Shelves in Lower Cabinet. $950 FOB NE Wasserman & Associates 800-382-0329

2010 Kaeser SK15 Compressor with Dryer and Tank

2010 Kaeser SK15 Sigma compressor with KAD-60 dryer and a 200 gallon tank. Features a 15 HP rotary screw compressor, belt drive with automatic tensioner, produces 64 CFM @ 125 PSI.

Wood Truss Systems inc.

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

Door & Stair Equipment

Norfield 1020 Double-End Trim Saw

Powered & Non-Powered Truss Rollers with Stands

$350.00 Each - Powered (10 Available) $200.00 Each - Non-Powered (15 Available) 14' Long x 4 1/2" Diameter Rollers.

Adjustable Stands. 230/460 Volt/3 Phase 1/2 HP Motors . FOB SD. Wasserman & Associates 800-382-0329

PHONE: 800-289-5627

Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 765-751-9990

2004 Hain 60 Ft Measuring System

Hain Company measuring device model MEA, 1/4 HP electrical linear actuator unit with steel stops and pusher, 60 foot long, measures lengths in feet, inches and fractions of an inch. Includes conveyor with legs and 2" x 4" x 1/4" aluminum extrusion. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. 110 volt electrical.

$9,900 FOB CA

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

You Saw it in the

RUVO 512 Strike Jamb Router

R P ed r u ic ct e io n

Window Lite Cutting, Cylinder Lock Boring, Latch Drilling, Faceplate Routing, Overhead Template. $12,500 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

-Jambs up to 1 1/4 x 10" x 9' -Strike Mortise up to 6" -Adjustable Jamb Stops -Foot Pedal Clamp -Porter Cable Router -120 Volt / 20 Amp FOB: MO Price: $1,500.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

SO

Reconditioned 1999 Norfield 3800 LRO Door Lite Machine

Used Norfield Magnum Door Machine & Used Norfield 250M Strike Jamb Router

$12,000 FOB OH Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Adverti$er

Door & Stair Equipment

LD

Door & Stair Equipment

Don’t Forget!

March 16th, 2012 #05135 Page #28

2001 Norfield Signature Series Magnum Door Machine

Includes Nasco Model WP-539 Auto Feed Screwdriver & 2 Routers. $19,900 FOB AZ NOW $16,900 14,900 Wasserman & Associates 800-382-0329

800-382-0329

bargain basement Priced to move - offers welcome 1998 Triad “GEN II” 10’ x 24’ Interior/Exterior Wall Panel Line (FOB MN) $12,900 Triad “GEN II” 10’ x 24’ Framing Table Triad “GEN II” 10’ x 24’ Sheathing Table with Double Tool Panel Bridge & Auto Return 2 Sections of 20’ Roller Conveyor Handle Bar Router Excludes Tool Dollies, Nail/Staple Guns & Gun Mounts/Trigger Pulls Used Klaisler 14’ x 62’ End Eject Roller Gantry System (FOB OH) $14,500 NOW $10,900 -Klaisler 14’ Roller Gantry (track mounted) -(8) Klaisler Tables with Plastic Tops -14’ Finish Roller Three (yes 3) Idaco Componamatic Saws plus One (1) Speed Cut Parts Saw Location: IL Price: $5,250.00 NOW $4,250 For All 3 Componamatics -2 Working Saws, One Parts Saw -2 Scrap Conveyors 12 7 Manual Component Saws - $7,500 & Under $6,900 - FOB NE - 1989 TimberMill 6-20 Component Saw $7,500 - FOB NE - 1995 Clary Master 5 Blade Component Saw $7,250 - FOB AB - 1990 TimberMill 6-20 Component Saw $7,000 - FOB AZ - Mid-90’s Mitek Easy Set 1000 Five Blade Component Saw $5,500 - FOB MI - 1992 Mitek Easy Set 2000 Five Blade Component Saw $5,000 - FOB VA - Clary 4 Blade Component Saw $4,900 - FOB MT - Idaco Componamatic 4 Blade Component Saw 3 Used Lumber Splicers - $2,000 & Under (OH, IL & IA) Used Stair Clamp - FOB NE - $1,500 -Hydraulic Clamping - 240 Volt / 3/4 HP / 4 Amp Motor -(8) 9” High Side Clamps - 148” Frame Length - 34” to 50” Clamp Width NEW Wind Brace Saw for Wall Panel Metal Brace - FOB NE - $950

1985 Norfield Magnum II Door Machine $9,900 NOW $8,500 FOB AZ

Used Idaco Webmatic 4 Blade Web Saw FOB: MN - $9,900.00 NOW $7,500 -Manual Angulation -16’ Capacity Waste Conveyor & Short Incline Conveyor to Adjacent Saw - 480 Volt/3 Phase Add $4,000 for 22’ Live Deck with 7’ Skatewheel Conveyor Extension Used Full House Assembler FOB: OK - $1,900.00 Assemble Interior & Exterior Doors & Jambs Height: Up to 8’-0” - Width: 1’-0” to 8’-0” -Excludes Staple Guns

Toll Free: 800-382-0329

www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #29

Don’t Forget!

You Saw it in the

Adverti$er

new equipment showcase

Job Opportunities

JobLine.com, inc.

The

800-289-JOBS

Introducing the:

Purlin Plunger

SET TRUSSES FASTER WITH PREDRILLED PURLINS 





Time To Hire?



We’re here when you need help! visit: www.thejobline.com

Pre-Drill & Mark Only 2-3 Hammer Blows (60d Nails) Purlins Reduce Field Labor by 25-30% Set Trusses Faster & More Accurate Reduce the Exposure to Jobsite Fall Hazards Pre-Drilled & Marked Purlins (Shown)

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL! Priority: Immediate Search

Business Development Manager Laminated Beams

Location: Texas Details: Work with the Sales manager to determine commercial business potential in Texas and surrounding states. Build relationships with contractors, architects, designers, and business owners in the commercial industry using Glulam products; responds to RFQs, sources take offs & shop drawings, prepare quote proposals & letters, estimates freight, generates bid documents, completes internal files, and manages orders & shipments for awarded bid.

ID: J10485

IMMEDIATE OPENING Designer - Truss/Panel

Location: Quebec Canada Design roof and floor truss as well as wall panel design using MiTek and ITW software. JobLine Truss Design Skills Evaluation is required and salary may be adjusted based on results. Attention to detail and accuracy is important. Projects include primarily single family residential with some multifamily. The ideal candidate will work with other designers, assist with difficult projects, and provide IT and software support as needed. The location requires 50-55 hrs a week in peak season, with flex time off in the slow months. MiTek truss software experience is required and ITW panel experience is a plus. Relocation assistance is negotiable .

Compensation: $45-50k+ bonus.

Thom's Notes: The employer will consider a US candidate as well as Canadian citizens.

US candidates must have a 2 year degree in an industrial design or architectural field with 3-5 years of experience to qualify for a NAFTA work visa.

ID: J10477

PHONE: 800-289-5627

Visit us at www.SQ-1Design.com

Specifications and Gallery 

Multi head, (3) 1/2HP industrial-duty drill head design allows for pre-drilling purlins from 4’up to 20’ in length with 5.6 sec. cycle time



Drill heads feature “quick stop” clamping for fast drill head location movement



Drill bit detection provides warning to operator in the event of drill bit failure



Features shaft driven infeed/outfeed material handling chain conveyor. Belt conveyor transfers drilled purlin to outfeed deck with auto-eject feature



Vertical and horizontal air clamping results in consistent and accurate hole placement



Touch screen PLC controls create user friendly operator interface for both manual and automatic operation



Automatic operation features material detection devices resulting in activating indexing of all sequences and transfer to outfeed material deck.



1ph. 230V power

Clamping

PLC Touch Screen Control

Drill Bit Sensor

Centerline Marking

Outfeed Deck

Outfeed Belt Conveyor

Outfeed Ejectors

Drill Head Adjustment

Sean Hubbard 317-440-2804 Sean@SQ-1Design.com Fax 320-210-4237

Jay Bunyard 317-354-5438 Jay@SQ-1Design.com Fax 320-210-4237

Scan our QR code to view our latest video http://www.youtube.com/watch?v=78A3uIJGj4U

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

March 16th, 2012 #05135 Page #30

new equipment showcase

Automated Jigging System AUTOMATE YOUR ROOF TRUSS LINE WITHOUT MOVING A TABLE

AUTOMATE

SETUP TRUSS PROFILE IN 60 SECONDS OR LESS

RETROFIT ANY ROOF TRUSS TABLE; WOOD, PLASTIC OR STEEL MINIMIZE DOWNTIME,

ONSITE INSTALLATION SAVES THOUSANDS OF DOLLARS AS OPPOSED TO OTHER RETROFIT SYSTEMS

THE LEAST EXPENSIVE DUAL PUCK RAIL SYSTEM ON THE MARKET, GIVES YOU A COMPETITIVE EDGE

To learn MORE about MangoTech Automated Jigging visit us at www.MangoTech.com.au Contact us at Sales@MangoTech.com.au or 866-GO-MANGO PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #31

Don’t Forget!

Adverti$er

You Saw it in the

new equipment showcase

On the Cutting Edge...

New! Porta Field Press

New! Roll Splicer

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Folding Measuring System (FMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

The Table Measuring System (TMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller version.

Features: • • • • • • • •

Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area

Call 770-434-1006 For Details Salter & Associates www.salter.com

We go to any lengths to expand your opportunity.

PHONE: 800-289-5627

Features: • • • • • • • •

The Portable Measuring System (PMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place

The Manual Measuring System (MMEA) adjusts quickly with a turn of a handle without changing the operator's position on the line.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com

Phone: 530.295.8068

Fax: 530.295.0468

Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672

You find the opportunity -- we’ll build you the products to meet it.

Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

An

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

March 16th, 2012 #05135 Page #32

Don’t Forget!

You Saw it in the

Adverti$er

Job Opportunities

new equipment showcase

765-751-9990

inc.

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

JobLine.com, inc.

The

800-289-JOBS

Combining the qualities and expertise you should expect from an industry supplier

WoodRunner by Apex Machine Works $114,900 FOB MN

8

email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Truss/Panel Designer

Location: New England Truss and wall panel design using MiTek software on single and multifamily projects.

Has to be able to hit the ground running with strong wall and truss skills. Ability to step into the desk and instantly use MiTek software is a non-negotiable requirement.

Compensation: base pay $45-55k+depending upon experience. Relocation is acceptable with reasonable expenses paid and is open to negotiation.

Job ID: 10482.

The WoodRunner is a revolutionary step forward in automated lumber retrieval systems. As a totally automated system, the WoodRunner eliminates the costs and limitations associated with manulally fed saws. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Mizer, Alpine's ALS and other linear saws. Click on the photo for additional images, a brief VIDEO, or to download a Brochure and a footprint layout for Wood Runner Miser Specs or Wood Runner Alpine ALS Specs.

Job Opportunities

Truss Designers Needed in Alberta Canada NOW! send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com Strictly Confidential!

PHONE: 800-289-5627

Sales/Plant/Design/Estimating Manager Are you a multi-tasker with the ability to grow sales, lead design, and manage operations for a plant that has potential to produce $20M? The job requires someone who has experience with total takeoff, design/layout/engineering using MiTek software, manufacturing operations, and managing multiple department while focusing on growing sales. The ideal candidate will have either been a GM or past owner, who came up through the business in manufacturing, design or sales. If this is a possible match for what you are looking for, let's talk!

Email to request information thom@thejobline.com

IMMEDIATE!

Truss/I-Joist Designers Needed in North Carolina

NOW!

send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com Strictly Confidential!

@JobLine

Read/Subscribe online at www.componentadvertiser.com

IMMEDIATE OPENINGS (2) Estimator - Truss

Location: Mid Atlantic We need a experienced Estimator for Single Family Custom, Commercial, and Multifamily truss, panel and EWP. Must have experience with MiTek eFrame for estimating or Sapphire software. Truss Design is not the main focus of this job.

Other pre-screening specifications apply Compensation: $20-26hr.+- +OT based on ability and experience. Relocation assistance is negotiable.

URGENT-NEED NOW! Designer - Truss

Priority: Immediate Search Location: Texas JobLine Senior Designer ranking or WTCA III certification, and MiTek software experience required for this position. Prefer someone with commercial and multifamily and having wall panel experience is a plus. $50-60k+- to start, relocation assistance negotiable.

ID: J10480 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #33

Don’t Forget!

You Saw it in the

Adverti$er

new equipment showcase

candidates

JobLine.com, inc.

The

800-289-JOBS

800-382-0329 Time To Hire?

We’re here when you need help!

www.thejobline.com

NEW Monet DeSauw Wood Finger Jointing Line

Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada.

Advantages: -Reduce Waste

-Positive Ecological Impact

-Produce Straight Material

$79,900 FOB MO

www.wasserman-associates.com Availible candidates

Multifamily Designer/Design or Plant Manager - Truss/Panel

Supervise wood truss design/pricing department for single, multifamily, and commercial construction for a $28 million plant. Perform recruiting, training and management of design staff. Complete design and engineering of complex truss systems. Develop design department procedures, training program, and methods to measure productivity for all of the Eastern Division plants. Assisted with training new Managers in company procedures. Prior experience as Plant Manager & Production Manager of truss & panel plants, 25+ production workers. MiTek, eFrame, PanelBuilder advanced user, CAD, Excel, too.

Compensation: $55k+ Relocation: USA - ALL States ID: C11051

Plant/Production Manager Truss/Panel

All aspects of production in roof and floor trusses. Including shipping, safety, and training a workforce of 50. Multiple start ups over 25 years. Relocation: USA - ALL States Compensation: Mid $50's+ ID: C10718

PHONE: 800-289-5627

Senior Designer/Design Mgr - Truss/LBM/I-Joist/EWP/ Modular

A flexible professional engineer with design experience of residential and small commercial structures, including design of foundations and geotechnical studies.

Has extensive experience with both floor and roof trusses. Experienced as supervisor of technicians and with customer support.

Responsible for designing roof and floor trusses and girders, designing repairs for trusses, engineering of our SpaceJoist product, drafting updates of standard engineering details, and presenting in-house continuing education course.

Relocation: USA - Northwest, USA - Western ID: C11757

Production Mgr/Supervisor Floor Truss/Wall Panel

Set up of work to production employees, batch, distribute, manage jobs to be cut and built for on time delivery.Perform weekly payroll, hire of new employees. set up and purchase lumber and other necessary stock for production. oversee maintenance of all equipment including the repair.

Compensation: $50's Relocation: IL, IN, IA, WI ID: C10942

Management/Operations/Sales Building Components LBM Manufacturing

I am an Accomplished Manufacturing and Operations Leader with a history of increasing responsibility. My proven experience covers contractor building materials and manufacturing to the construction and turnkey fields. I have over 16 years of management and leadership experience, and am seeking a management position with a progressive company that offers advancement commensurate to job performance.

Relocation: USA - ALL States ID: C11760

Estimator - Truss/Panel/I-Joists

Sales estimator for floor & roof trusses, wall panels, Trus Joist products, sheathin & lumber. I also was responsible for the monthly I-Joist/LVL inventory count.

Relocation: USA - ALL States ID: C11713

@JobLine

Read/Subscribe online at www.componentadvertiser.com

These and additional candidates are available through theJobLine. com, Inc. All inquiries are strictly confidential. Fees are contingency based and only due if you hire or engage a candidate we present. Low cost, flat rate fees quoted upon request.

Contact: Thomas McAnally thom@thejobline.com www.thejobline.com 800-289-5627 x 1

Senior Designer - Truss/Panel/ Wood or Steel

As a production designer I produce between $200,000 - $300,000 per month in cold form steel roof truss designs, mostly commercial projects. As a designer the majority of my projects are being built in the pacific northwest and military projects in California, shipped from our facility in Colorado.

Contact the customer: Many of my projects are "design/build", extensive contact with Architects and Engineers is required to problem solve engineered truss to bearing connections, progressive collapse systems, seismic/ lateral loading, misc material (ridge angle, eave angle etc) Design: Ensure that my designs are accurate, efficient, cost effective.

Utilizing CAD, ensure that all truss to truss, truss to bearing, misc materials, truss placement, cross sections, any special connection details are accurate and clearly drawn to scale for approval/ field use. Ensure all details are clearly marked on the shop drawings as my production packs are presented to the shop for fabrication.

Documentation: Build a library of reference material, blanket seals, truss to truss connections etc. Log any and all RFI's required for any project I'm working on.

If this is the job you need done, Candidate is asking upper $40's to $50's Relocation: CO, USA - Western ID: C11592

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

JobLine.com, inc.

The

800-289-JOBS

Don’t Forget!

You Saw it in the

Available candidates Engineers Association of Arizona (SEAoA), The Reference Library, the Blue Book, the Home Builders Association of Central Arizona (HBACA) and the Arizona Building Officials (AZBO).

Conduct Market Research for new LGS products, identify sales opportunities.

New Product Launch for (LSB) and conduct technical training for our customer base and sales staff.

Relocation: Arizona, Colorado, Idaho, Nevada, New Mexico ID: C11755

Designer - Truss (NTDSE 80!)

Time To Hire?

We’re here when you need help!

www.thejobline.com

These and additional candidates are available through theJobLine. com, Inc. All inquiries are strictly confidential. Fees are contingency based and only due if you hire or engage a candidate we present. Low cost, flat rate fees quoted upon request.

Contact Thomas McAnally thom@thejobline.com www.thejobline.com 800-289-5627 x 1

Outside Sales/GM Truss/I-Joist/EWP

I have been in the Wood Truss Industry for over 32 Years. I am up to date with TPI and stay current with any changes including HIB-91 recommendations. I am capable of doing any job in the Truss Industry. My strong suit and what I enjoy most about my line of work is the people I meet and building valuable relationships with customers, If given the chance I know that I will be an asset to your company and I will bring with me the values and knowledge that has been instilled in me and I will not let your company down. I have strong Listening , written and Oral communication skills. I am understanding, trustworthy and very likable. I have a clear understanding of the job field.I strive to be the best and make the company the best.

Relocation: USA - ALL States ID: C11362

Outside Sales - EWP/LGS/LSB

Responsibilities to expand our (EWP) organization with new and existing customers. Develop and implement new ways of marketing EWP in the Commercial and Residential arena. Forge and build relationships with the Framers in these markets to lay the ground work for future sales growth.

Launched new Commercial focus, securing major builders & projects, increasing market penetration and sales by over 50%.

Implemented new sales strategy, networking with organizations like the Structural

PHONE: 800-289-5627

Adverti$er

March 16th, 2012 #05135 Page #34

4 years experience as a Designer. Primary duties: design, layout, optimization, and cutting/production documents. Secondary duties: checking others work, repairs, customer service, inside sales, field measurements, software maintenance, training, and filling in for the design manager as needed. Software used: Alpine & MiTek. Component experience includes floor trusses and roof trusses. Market experience includes tract, single family, single family custom, multi-family, light commercial, and agriculture. BS Architectural Engineering Technology.

Compensation: $45k+ Thom's Notes: Great degree, fast advancement and scored 80 on our Truss Design Skills Evaluatuion. (Average score is 79 and nearly 8 years experience) Relocation: Alabama, Mississippi ID: C1036

Design/Estimating - Truss/ EWP/Windows/Doors

Primary duties: design, layout, optimization, cutting/production documents, and takeoff.

Secondary duties: checking others work, repairs, and customer service. Software used: MiTek, Robbins, CAD - Optiframe, BC Framer and BC Calc. Component experience includes floor trusses, roof trusses, I-Joists, and EWP. Market experience includes tract, single family, single family custom, multifamily, and light commercial. My volume was $100,000 to $300,000 a month.

Thom's Notes: NOT a job hopper.

Relocation: Maryland, Virginia, West Virginia ID: C10359

Senior Designer/Plant or Design Manager - Truss/Panel/ Lumber/Hardware/EWP

Work with existing contractors, architects, project managers and home owners and generate new wall panel, roof and floor truss accounts through cold calls, referrals and various state on line plan rooms.

Responsibilities included: creating roof, floor and wall panel layouts and truss engineering designs. Determining sales discounts for each customer and bid based on qualifying factors and assessments.

Optimize all truss designs for production, create pick and batch cutting lists, build paperwork and job site delivery packets.

Coordinate truss production and delivery at multiple company truss plants within the

USA for a National account that generated yearly sales of 750k. Handled 100% of companies wall panel and shed business.

Updated weekly lumber pricing and margins for estimating. Performed all bidding and sales, wall panel and shed design, material ordering, on-site measuring, scheduling of personnel for production, production supervision and management, personnel training, monthly inventory management and on-site supervision of installs. Other duties included working closely with Area Manager to market and promote companies shed business as well as determining sales trends and identifying competitor prices.

Assisted with lumber salesmen training on products and services supplied through all aspects of components. Assisted with contractor training seminars given once or twice a year on the use of and understanding trusses. Work closely with home owners, contractors and project managers on various types of projects to include multi-family, custom homes, commercial buildings and shops.

Relocation: AK, AB, BC, Canada Western/Central, CO, ID, IA, MT, NE, NV, ND, OR, SD, UT, WA, WY ID: C11697

Senior Designer/Design Mgr Truss/Panel/EWP/I-Joist.

20+ years experience. Supervised design staff, schedule workload, assist in complex design issues, work with sales staff and production manager daily. Review problem areas in plans prior to construction at bid stage, meet with customers on site to resolve design issues. Provide value engineering with architects and engineers during project development. Custom homes, tract homes, multifamily and commercial projects supplying roof, floor, EWP, TJI, and all framing hardware to complete the package. Work with design staff to optimize all cutting going to the shop for maximum profit. Software: Microsoft Office, AutoCAD, MiTek 20/20, eFrame, MBA, Simpson, FASTBeam.

Relocation: Alberta, Arizona, California, Colorado, Florida, Hawaii, Nevada, New Mexico, USA - Northwest, USA - Southwest, Washington.

ID: C11624

Designer/Design or Engineering Manager - Truss/Residential Modular

7 years modular & panelized homes, 10 years Truss experience. AutoCAD, MiTek, TJ Beam software experience. Supervised design/engineering department, hands on design and CAD as needed. Maintained lumber and costing files, managed order checking and quality programs to minimize errors and expense, managed 3rd party program, prototyped new home models and worked with production to refine labor and material costs.

Compensation: $45-50k+ Relocation: USA - ALL States ID: C11024

Read/Subscribe online at www.componentadvertiser.com

Senior Designer/Design Manager/Outside Sales - I-Joist/ EWP/Glue Lam/Open Web

10 years EWP experience. Over saw all of the designs of EWP sold in the Dallas/ Fort Worth, Houston, San Antonio, Austin and South Texas region. Oversaw a team of 5 designers. Trade show experiences, Supported outside sales to close the deals.

Software: AutoCAD, BC Framer, TJ Beam, TrusPlus, Excel, I-Joist software.

In addition to "10 years experience w i t h Tr u s J o i s t s , B o i s e , L o u i s i a n a Pacific,Roseburg, TrusWal, GatorJoist and SpaceJoist, I have extensive knowledge of glulams. I have also trained others and checked other designer's work as a Design Manager roles." I also have outside sale experience, along with product knowledge to Builders and Code officials.

Compensation: $45-50k Relocation: KS, OK, TX ID: C11594

Designer/Design Manager Truss (wood & steel)

10 years experience. Assist design manager in everyday accountability for architectural and truss design department for a home builder / truss company. Train and assist beginning and junior designers with questions and design issues. Responsible for producing accurate construction and truss design drawings. Design and estimate wood roof and floor truss systems for multi-family, commercial, residential, and custom homes.

Work closely with architectural firms, engineering firms and general contractors to resolve issues and concerns of client or company. Job site inspection for code compliance. Service customer accounts on a daily basis. Products: Roof & floor trusses, wood & LGS, lumber and hardware.

Software: MiTek, Alpine, AutoCAD, Excel, Word Compensation: $50k+Relocation: TX, AR, FL, NC, OK, TN ID: C10723

Senior Designer/Design Manager - Truss/Panel/I-Joist/ EWP

20 years experience designing roof & floor trusses, wall panels, I-Joists, and EWP. Supervised 5 designers, customer service, optimizing, and quotes. MiTek, OptiFrame, Robbins, TJ Beam, Truswal and Microsoft Office.

Compensation: $60k+- opportunity JobLine certified Senior Designer, 5/5 overall ranking.

Relocation: USA - ALL States, AB, Canada - Western/Central, Canada Eastern ID: C11256

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

JobLine.com, inc.

The

800-289-JOBS

Don’t Forget!

You Saw it in the

Available candidates Production Mgr/Supervisor Floor Truss/Wall Panel

Set up of work to production employees, batch, distribute, manage jobs to be cut and built for on time delivery.Perform weekly payroll, hire of new employees. set up and purchase lumber and other necessary stock for production. oversee maintenance of all equipment including the repair.

Compensation: $50's Relocation: IL, IN, IA, WI ID: C10942

Senior Designer - Truss/Panel/ EWP/I-Joist/Framing Package

Time To Hire?

We’re here when you need help!

www.thejobline.com

Senior Designer/Design Manager - Truss/Panel

JobLine Certified Senior Designer (Top 2%). Candidate has 12 years industry experience and 12 years experience in this position. Products include floor trusses, roof trusses, wall panels, and hardware. Markets include tract, single family, custom, high end, and light commercial. Primary duties include design, layout, optimization, and cutting/production documents. Secondary duties include checking others work, customer service, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, OptiFrame, GenericCAD, and TJ Expert. Training received includes WTCA Level 1, 2, 3, MiTek 20/20 & Engineering Principles..

Compensation desired: $70 to $75 Relocation: WI, IL, MN ID: C10019

Design Manager/Sr. Designer/ PE - Truss/Panel/EWP

30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open??

Thom's Notes: PE with Mid Atlantic seals Relocation: USA - South ID: C10897

Designer/Design Manager Truss/Panel/EWP/I-Joist

Design Manager: Supervised 6 designer.

Utilized MiTek Sapphire, 20/20, MBA, EFrame and OptiFrame as well as GP I-Joist programs. Design commercial, tract and custom projects for quotation and sales.

Produced shop drawings for production.

Utilized MiTek Sapphire Structure, MiTek 20/20, MiTek MBA and joist/beam calc programs. Worked closely with sales force and customers to produce best design possible. Compensation: $50's Relocation: USA - ALL States ID: C11005

PHONE: 800-289-5627

Adverti$er

March 16th, 2012 #05135 Page #35

Candidate has 15 years industry experience, 4-5 years experience in this position, and 10 years in subordinate positions leading to this position. Products include floor trusses, roof trusses, wall panels, I-Joists, EWP, hardware, and complete framing packages.

Markets include tract, single family, single family custom, multi-family, and light commercial. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, customer service, inside sales, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, TJ Expert, AutoCAD, and I am willing to learn new software.

Compensation desired: $45k+. Motivating factors: advancement, compensation, benefits, job security.

Relocation: CA, CO, TN, WA ID: C10199 General/Location/Regional Manager - Truss/Panel/EWP Currently has P&L responsibility for floor and roof truss plant mostly building tract and single family custom. Also distributes EWP. All departments report to the candidate with oversight by a corporate sales manager for the sales staff only. Has managed two shifts with 100 +/- employees at the $13,000,000 to $16,000,000 level. Prior industry experience includes EWP Division Manager, Technical Sales Representative, and EWP Designer.

Is also an experienced framer/framing foreman. Education: Associates degree. Has a working knowledge of, but is not currently proficient in AutoCAD, TJ Epert, MiTek 20/20 and eFrame.

Compensation: Negotiable.

Relocation: AL, CT, DE, GA, IN, KY, LA, ME, MD, MA, MI, MN, NH, NJ, NY, NC, OH, RI, SC, VT, WV, PA, TX, WI, USA - ALL States, AZ, CO, FL, IL, MT, NE, NV, VA, WA, DC ID: C10241

General Manager - Truss/Panel/ Lumber/ Doors/Windows/ Cabinets/ EWP/I-Joists

Oversee all aspects of the manufacturing plant (made trusses, floor trusses and wall panels). HR— Shipping — Sales— Budget control — safety —- design —

ordering. Did 2 start ups for this company and travel to many of their component plants to help get cost and budget under control.

Also work with redesigning the flow of some of these plants. My last year traveled to a lot of the plants to set up new policy for them. Areas of experience: Inventory control, ordering of raw goods, hiring and firing. Working with Sales, Engineering, and Converting, Shipping and Receiving along with working closely with the owners.

Running the plant --- the only thing I really don't get to involved with is sales --- the CEO handles the sales team.

Compensation: $80's Relocation: AL, AZ, CO, FL, GA, HI, IN, KY, MS, NM, NC, OH, SC, TN, TX, VA, WV ID: C11686

Senior Designer(JL) Truss/Multifamily

10+ years industry experience as senior truss designer. Software: 10 years Mitek, 1 year Truswal, MS Office, TJI Beam, Autocad Lt, Simpson, & USP. Primary duties: estimating, layout, engineering, & job costing of roof, floor, & ewp components. Secondary duties: checking others work, field visits, field measures, customer meetings, repairs, & customer service on a daily basis with contractors, engineers, architects, & builders to resolve design issues from project conception to completion.

Go to guy for complex commercial & residential applications. Associates Structural Engineering. WTCA Level III. Thom's Notes: JobLine Tested at Senior Designer Level 94% only used Jobber calculator.

Relocation: WI ID: C11282

Senior Designer/Outside Sales,Estimator - Truss/I-Joist/ EWP

20+ years experience as a Designer/Senior Designer. Primary duties: design, layout, optimization, and takeoff. Secondary duties: customer service and field measurements.

Software used: MiTek, OptiFrame, Alpine, AutoCAD, Soft Plan, Robbins. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware. Market experience includes single family custom, multi-family, and light commercial. My volume was varied depending on projects.

Also involved in Outside Sales.

Compensation: $48k+ JobLine Notes: JobLine Certified Senior Designer - Advanced Level Relocation: IL, IN, OK, TN, TX ID: C10536

Read/Subscribe online at www.componentadvertiser.com

Additional Candidates on www.thejobline.com W E A L S O H AV E WORK FROM HOME CONTRACT DESIGNERS available NOW! Senior (ACE) Designer/ Estimating/Outside Sales Truss/EWP

6 years experience: facilitated the truss sale, design, & delivery for lumber salesmen lacking truss experience. Developed own customer base by selling trusses. Design layouts of floor and roof truss systems for multifamily/commercial projects.

Proficient use of MiTek Engineering, eFrame, AutoCAD, TJBeam, and Excel programs. Compensation: $60's One of our top 1% ACE's Relocation: TX ID: C11427

Designer/Design Manager Truss/I-Joist/EWP/Packages

35 years experience. Supervision of staff designers, training and coaching design team, checking work for accuracy, estimating and quote preparation, promoting sales with technical assistance, using Mitek software for advanced truss designing and Mitek MBA for creating and enhancing useful reports, using MS Word, MS Excell, MS Outlook, problem solving and field trouble shooting, communicating repair details.Compensation: $65k+ package Relocation: FL, GA ID: C11671

JL Senior Designer(5) Design Manager Truss/Single & Multi Family

17 years design experience. 14 in Multi Family. Estimate, design, and engineer roof and floor truss systems for Multifamily, Commercial and Agricultural truss systems.

Prepare shop drawings for production.

Provide customer support, troubleshooting, and design solutions. Current software experience: MiTek, TJ Beam, Simpson, Word, Excel.WTCA certified.

Compensation: 50k Thom's Notes: Candidate scored in our Senior Designer range! Top 5% nationwide.

Perfect skills curve. No deficiencies.

Relocation: KS, TX, OK, CO, USA - Southwest, IA, LA, MO, NE, NM, ND, SD, AZ, USA - South, UT, USA Western, WY ID: C11016

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #36

Don’t Forget!

You Saw it in the

Adverti$er

Used Equipment Wanted!

765-751-9990

Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329 www.wasserman-associates.com

Join the Southern Pine Partnership!

Take Back Your Business Become More Competitive with:

  

Powerful Software High Quality Connector Plates Independent Established Supplier

All at a Great Price

For a software demonstration call 1-800-652-6050 www.keymark.com

Time to Hire?

Since 1915

Affordable

Recruiting & Testing

Since 1992

JobLine.com

The As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org

800-289-JOBS(5627)

, inc.

www.thejobline.com

Unmatched Quality • Engineered Design • Structurally Superior

Call 573.437.4848 for your FREE SAMPLE, or visit www.trimfitllc.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #37

Don’t Forget!

You Saw it in the

Safety First!

Safety Meeting Topics From State Fund CA.

Safety and Substance Abuse Dont Mix

Drug use and alcohol consumption are normally considered personal issues. They only become an employers concern when they affect safety and worker performance. Drug and alcohol abuse cost employers through high absenteeism and sick pay. Abusers hurt themselves and their families if they lose their job as a result of their actions. If they are fired or cannot function on the job, the company loses the services of an experienced worker. Those under the influence of drugs or alcohol cause friction in the work group, lower morale and work efficiency, use poor judgment that results in bad decisions, and give the company a poor public image.

Certain times of the year individuals should be especially aware of their alcohol and drug consumption. In the winter months when the days are dark and dreary, some people experience a sense of depression or seasonal affected disorder (SAD). They may turn to drugs or alcohol in the mistaken belief it will relieve the symptoms of the disorder.

The holiday season, with increased social gatherings or added financial stress, leads some people to misuse drugs or alcohol, especially during this year of millennium celebration. Those who over-consumed alcohol or drugs yesterday and are hung over today may feel out of sorts, still trying to recover, and may not give all their attention to the safety aspects of their job. Their judgment and safety performance becomes impaired and the likelihood of an accident or injury to themselves or coworkers increases.

Sometimes a personal or health problem persists. In most cases, the problem gets resolved. But if it is not resolved some people turn to alcohol or drugs. Even some prescription drugs can interfere with job performance. The individual cannot think clearly or becomes distracted.

This can lead to accidents. Irresponsible consumption of drugs or alcohol not only jeopardizes the safety and health of the worker and coworkers but it can impact the employers business and affect the future of all families involved.

Adverti$er La seguridad y la drogadicción o el alcoholismo no se mezclan

El uso de drogas y el consumo de alcohol se consideran generalmente asuntos de índole personal. Éstos solamente incumben al empleador cuando afectan la seguridad y el desempeño del trabajador.

La drogadicción y el alcoholismo tienen un costo elevado para los empleadores por ser causas del ausentismo laboral elevado y de las ausencias por enfermedad con goce de salario. Los drogadictos y los alcohólicos se lastiman a sí mismos y a sus familias si pierden sus trabajos como resultado de sus acciones. Si se les despide o si no pueden desarrollar las funciones del trabajo, la empresa pierde los servicios de un trabajador con experiencia. Aquéllos que se conducen bajo la influencia del alcohol o las drogas causan fricción en el grupo de trabajo, bajan la moral y la eficiencia en el trabajo, utilizan el mal juicio que resulta en malas decisiones, y dan una mala imagen pública a la empresa.

Durante algunas épocas del año, las personas deben estar especialmente conscientes de su consumo alcohólico y de drogas. Durante los meses de invierno, cuando los días son opacos y lúgubres, algunas personas padecen de algún tipo de depresión o de síndromes estacionales (SAD, por sus siglas en inglés). Ellos pueden optar por consumir drogas o alcohol con la falsa esperanza de que eso les aliviará los síntomas del trastorno.

La época de las fiestas de fin de año, con un mayor número de reuniones sociales o de mayor tensión nerviosa por problemas económicos, conduce a muchas personas a excederse en el uso de drogas o en el consumo de alcohol, especialmente este año de celebración del nuevo milenio. Todos aquellos que consumieron alcohol o drogas en exceso ayer, y tienen resaca hoy, pueden sentirse faltos de coordinación, aún tratando de recuperarse y quizá no le presten completa atención a los aspectos de seguridad que su trabajo requiere. Su juicio y desempeño seguro se verán seriamente disminuidos y aumentará la posibilidad de que ellos o sus compañeros de trabajo sufran accidentes o lesiones.

Algunas veces los problemas personales o de salud persisten. En la mayorìa de los casos, el problema se resuelve. Pero si no se resuelve, algunas personas recurren al alcohol o a las drogas. Incluso algunos medicamentos recetados pueden interferir en el desempeño del trabajo.

La persona no puede pensar claramente o se distrae. Esto puede llevar a accidentes. El consumo irresponsable de las drogas o del alcohol no solamente pone en peligro la seguridad y la salud del trabajador y sus compañeros, sino además, puede repercutir en las actividades empresariales del empleador y afectar el futuro de todas las familias involucradas.

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

March 16th, 2012 #05135 Page #38

Don’t Forget!

You Saw it in the

Adverti$er

Business Listings

JobLine.com, inc.

The

800-289-JOBS

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com J. Chip Dean PRESIDENT

Time To Hire?

440 Spring Street, Marshfield, MA. 02050 phone: (314) 374-7400 email: CDean@ComponentRunner.com www.ComponentRunner.com

We’re here when you need help!

M ACdverti$er omponent

www.thejobline.com

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Bruce Mann Manager

Wood Roof & Floor Trusses Wall Panels Engineered Components Gould Design, Inc. Christopher A. Gould -

Designing to your needs... One project at a time.

President

13540 East Boundary Road Building I, Suite 102 Midlothian, VA 23112-3943 brucemann.kbbp@gmail.com

CAD Design

Office: 804-744-7253 Fax: 804-744-7420 Cell: 804-304-7253 www.kb-bp.com

Designing to your needs... One project at a time

Reasons to consider utilizing GDI’s Design Services

Mylon Stark

Design is custom fit to your individual standards

Professional Services Anywhere, Anytime

Industry Leading Professionals at your fingertips Overall design department cost reduced, saving you $$$ Experienced with multiple industry design software suites Up to date with US & Canadian Building Codes

(772) 475-3583 - Call Today

cgould@goulddesigninc.com | www.goulddesigninc.com

40+ consultations have demonstrated that companies can improve their bottom line through lean and TOC principles.

Time standards (R.E., S.U. Man-Minutes) for truss labor estimation are provided.

See what past clients are saying on web site. Payback less than 3 months.

The easiest and most inexpensive truss labor tracking program available!

No Pre-Scheduling of orders or employees Any order or shop employee can be logged into any workstation at any given time for maximum flexibility! ½ the normal pricing of plate providers’ truss labor tracking software cost. No Setup & Installation Fees. Use Existing Shop Computers.

Free, No Obligation 3-Month Trial Period www.todd-drummond.com Phone: 603-763-8857

PHONE: 800-289-5627

Invest In Your People!

Here's a partial list of services BPS will provide to your operations:

• • • •

Supervisor & Leadership Development Safety Integration Development of Safety Committees Developing Personal Responsibility for Operational Success Workplace Safety & Health Training for "Best Practice" Application OSHA and MSHA-related Training and Education Jobsite and Facility Audits and Inspections Incident Investigations

• • • •

888.519.4130 toll-free 605.220.2342 mobile

info@bigpicturesafety.com www.bigpicturesafety.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

PHONE: 800-289-5627

Don’t Forget!

You Saw it in the

Adverti$er

Read/Subscribe online at www.componentadvertiser.com

March 16th, 2012 #05135 Page #39

FAX: 800-524-4982