Component Advertiser by Component Manufacturing Advertiser

A #

126

PUBLISHED WEEKLY January 13th 2012 #05126

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Inside:

ALSC:

Minutes - Board of Review: In the Matter of the Submission of the Southern Pine Inspection Bureau for Approval of Supplement 9 page 3

Keymark:

Cloud Computing - Fast Forward to the Past Page 8

Madisonâ&#x20AC;&#x2122;s Lumber Reporter Page 12

New Equipment Spotlight: Page 27

JobLine Hiring Zone: Page 29

Safety First Topics in English/Spanish: Page 33

Business Directory: Page 34

M ACdverti$er omponent

anufacturing

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

Adverti$er

January 13th, 2012 #05126 Page #2

www.mii.com/MiTekAssurance

8 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

Adverti$er ASLC Board of Review Minutes

You Saw it in the

Published Weekly

In the Matter of the Submission of the Southern Pine Inspection Bureau for Approval of Supplement 9.

Editor/Publisher

Thomas McAnally tmcanally@componentadvertiser.com

January 11, 2011

Advertising

This matter came before the Board of Review (the “Board”) on the submission of the Southern Pine Inspection Bureau (“SPIB”) for approval of proposed Supplement 9 to the 2002 Standard Grading Rules for Southern Pine Lumber containing revised design values for the major and minor species of Southern Pine (the “Submission”).

Thomas McAnally Position Available

Subscriptions

The Board notes that the issue of the adequacy of design values for these species was originally raised in anecdotal information from outside parties in 2010, indicating that their testing of some Southern Pine lumber had resulted in breakage below the published values. SPIB developed a sampling and testing plan (the “Plan”) to determine if there were grounds to believe that the resource had changed. The consideration of the Plan followed normal established procedures. The Plan was submitted to the Forest Products Laboratory (“FPL”) for technical review and advice, the matter was noticed on the agenda of the Board’s meeting, the agenda was sent to all members and alternates of the Committee and all other parties that had requested Board of Review agendas. The agenda noted that all background materials were available upon request. The Plan was a statistically appropriate approach based on a random sample of No. 2 2x4 lumber on a production-weighted basis from all producing regions. This Plan was approved by the Board on November 18, 2010.

Renae McAnally

Distributed FREE

via e-mail subscription

Download FREE and

subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk

SPIB and Timber Products Inspection (“TP”) gathered a statistically valid sample and sent pieces for testing of MOE and MOR to the SPIB lab and pieces for testing of MOE and tension to the TP lab. Because of the magnitude of the indicated reductions in the design values based on the No. 2 2x4 testing, SPIB submitted an additional Sampling Plan on September 15, 2011, to evaluate a range of different sizes and grades (the “Matrix”) which the Board approved after consultation with the FPL, notice to interested parties and an open meeting on October 20, 2011. The results and analysis is expected later in 2012. The Submission was originally made to the Board by cover letter dated September 15, 2011. Because the Board was aware that the Submission was of great interest and concern to affected

Advertiser “Stuff” Happenings at the Advertiser.

Component Advertiser

PO Box 16685 Fernandina Beach, FL. 32035 no reproduction in whole

800-289-5627

•

New phone number:

•

FAX: 800-524-4982

•

Mailing address: PO Box 16685 Fernandina Beach, Florida 32035

•

Our websitewas moved. Please be sure to update your bookmark www.componentadvertiser.com

or in part without permission from

eMagazine Reading options

Continued on page 4

Thomas McAnally - Publisher

the component advertiser

January 13th, 2012 #05126 Page #3

Advertising Free Trial: First quarter of 2012, free advertising trial for suppliers of materials, supplies or equipment You have two options with our new to industry manufacturers (at our discretion). Suppliers of Services free ad program will be later eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer this year. Please check with me for details. a 1 page link in our weekly notice. If you open 2012 Showcase: Submit pictures of your best truss or panel project, or manufacturing this in two page, you can easily change to one operation to be considered for our 2012 Showcase. Each week, we will showcase the best submittal page by clicking on the control Icon above. on our cover, with a story behind the photo inside. In a market where price is usually the winner, this is a chance to show your company pride. Photo’s should be high resolution, portrait format, any standard image file extension, submit to tmcanally@componentadvertiser.com. Your comments are welcome: email info@componentadvertiser.com

Member PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

R P ed r u ice ct io n

SAWS

2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw

Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329

Re Pri du ce ct io n

January 13th, 2012 #05126 Page #4

Don’t Forget! You Saw it in the

Adverti$er

ALSC: Continued from page 3

parties, it conducted a hearing on October 20, 2011 pursuant to Section 10.10 of the American Lumber Standard, Voluntary Product Standard 20-10 (the “Standard”), to allow presentations. Approximately 50 people attended that session. Prior to the hearing, the Board also determined that affected parties should have additional time to review the matter and make submissions. A second hearing was duly noticed and held on January 5, 2012, at which approximately 90 people attended in person and another 25 by phone. All interested parties were afforded an opportunity to provide comments to the Board, in writing and in person or by phone. In reviewing this Submission, the Board is subject to the provisions of the Standard, including Section 6.3.2.1 which provides in relevant part: Development of design values – Design values contained in grading rules shall be developed in accordance with appropriate ASTM standards and other technically sound criteria. The National Institute of Standards and Technology, with the advice and counsel of the U.S. Forest Products Laboratory, shall be the final authority as to the appropriateness of such standards or criteria. NIST has specifically approved ASTM D-1990 – “Standard Practice for Establishing the Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens” as an appropriate standard for developing design values. D-1990 contains restrictions on the use of data. For example, Section 7.2 provides in relevant part: Grade – To adequately model grade performance, it is necessary to sample a minimum of two grades representative of the range of grade quality ... Grades sampled to model grade relationships shall be separated by no more than one intermediary grade and no more than one quarter of the total possible range … in assumed bending GQI. Similarly, Section 7.3 addresses width: Width – In order to adequately develop the data for width, at least three widths per grade shall be tested, and the maximum difference in width between two adjacent widths shall be 4 in. (10 cm).

2002 Alpine AutoMill RS 5 Blade Automated Component Saw including Live Deck

Automated via Download or SemiAutomated via Touch Screen Input 19 Axes of Automation. Cut 2x3 thru 2x12 from 13” to 20’. Label Printer. 5 Chain Live Deck. Extra Set of Blades. Waste & Incline Conveyor. Self Dumping Hopper. $40,000 NOW $35,000 FOB WA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Koskovich Auto Omni Component Saw Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical. Wood Truss Systems 888.288.9874

PHONE: 800-289-5627

As noted above, the current phase of the testing performed by SPIB and Timber Products Inspection involved only No. 2 2x4’s. The Board is constrained by this controlling authority to decline to approve the proposed design values for grades and sizes of Southern Pine other than No. 2 2x4 at this time. In reaching this conclusion, the Board is mindful that testing is currently underway on a full matrix sample consistent with Section 7.4 of the D-1990. Continued on page 13..

800-382-0329

www.wasserman-associates.com

2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta

-32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #5

Don’t Forget! You Saw it in the

Adverti$er

SAWS

2004 Apollo Saw WITH Mango Automation

-Featuring, Direct-Drive 5.5 h.p. 220/440v, 3ph power, cuts 4x2, 2x3 through 2x12 material in EITHER 90° or 180° quadrants, from 9.5° +/- ,and up to 37”cuts with a 17.75” carbide-tip blade. Features stroke limiter, powdercoat finish, and miter-cut pins. Plexiglas shield, with laser guide. Featuring 20' Mango Automation. System runs with any roof truss software (optional configuration for walls available) to automatically set for length and angles, includes 30' HD Hytrol conveyor (20' feed side, 10' exit side). Serial No. APS-235. Wood Truss Systems 888.288.9874

n e ic tio r c P du Re

2002 Alpine AutoMill RS Component Saw

SAWS

R P ed r u ice ct io n

SAWS R P ed r u ice ct io n

Model 344, five-blade saw with (1) 20” blade, (3) 18” blades and (1) 32” blade. Cuts lumber lengths from 13” 90/90 to 20 feet and sizes 2x3 to 2x12” depths. Touch screen controls, digital displays, powered angulation and length. Includes scrap conveyor and incline. 480 volt, 3 phase, 53 Amps. $32,900 NOW $26,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

1998 MiTek Cyber Saw

Frame #072, Fully automated five-blade component saw. Cutting performed by 2-16” X 6HP, 2-20” X 6HP, 1-32” X 12.5HP. WITH Dell PC upgrade featuring touch screen controls for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 and 4x2. Lengths cut from 11 inches to 20 feet. Includes scrap conveyor with incline, out-feed skate-wheel conveyor, 6-flight Mitek live, in-feed deck, a complete, well maintained, OEM serviced automated saw. 220V/60Hz/3ph. $17,900 FOB SC. Wood Truss Systems 888.288.9874

PHONE: 800-289-5627

2005 Virtek LaserMC Wall Panel Cutting & Marking System

-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output. Vista Angle Boss Cut-Off Saw. 20’ Capacity. Environmental Computer Enclosure with Computer/Monitor. $39,000 NOW $32,500 NOW $29,900 FOB IL. Wasserman & Associates 800-382-0329

2004 Mitek Cyber A/T 5 Blade Automated Component Saw Waste & Incline Conveyor. NOW $49,900 Includes $5,000 Parts Allowance. FOB AZ. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

On the Cutting Edge... The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Folding Measuring System (FMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

SAWS R P ed r u ice ct io n

M ACdverti$er

January 13th, 2012 #05126 Page #6

ASI WA 500 Floor Web Saw

Four blade saw that includes shaker pan and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut is 9 inches and the shortest angle cut is 15 inches. The saw cuts 2x4 lumber up to 10 feet in length. Angles are set using digital readouts. Both the length and angle adjustments are power driven. $10,900 NOW $9,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

The Table Measuring System (TMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller version. Idaco Componamatic 4 Blade Component Saw

The Portable Measuring System (PMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

-Reconditioned in 2003 -Cuts 2x4 thru 2x12 from 12" to 24' -Powered Angulation & Carriage - B e l t Wa s t e & I n c l i n e C o n v e y o r -230 Volt / 3 Phase . $5,900 FOB ID. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

The Manual Measuring System (MMEA) adjusts quickly with a turn of a handle without changing the operator's position on the line.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Phone: 530.295.8068

Fax: 530.295.0468

Email: leonard@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

1992 MiTek Easy Set 1000 Saw

5-blade component saw 2x 16”, 2x 20”, 1x 32” blades, with swing-arm central control system, digital/analog display, power holddown, carriage, waste conveyor, dust-hoods, cuts from 11”@ 90/90, 45º four angle webs from 16”, 2x3 through 2x12 up to 20’, 230v, 3ph power. $9,950 FOB OH. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

SAWS

•

2006 Alpine AutoMill SC 5 Blade Automated Saw

Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $55,000 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com

January 13th, 2012 #05126 Page #7

Don’t Forget! You Saw it in the

Adverti$er

SAWS

2006 Virtek Laser MC

Automated plate cutting/laser burning layout system is complete with Virtek Laser MC Class IV laser w/computer workstation, Vista Angle Boss undertable cut-off saw and infeed table with lumber advance pusher bar cuts material from 2"-10" thick up to 16' in length. System precision cuts and laser marks wall panel parts with extreme accuracy, infeed speed of 30" per sec., optimizes lumber usage, minimizes scrap, improves quality and reduces labor, 20" blade, power in-feed deck, 480V, 3ph power. Safety guard, pusher system and motor included. MS Windows 95 operating system provides easy user interface, reduces operator error and speeds production. Requires 480V, 3ph power for saw, two 110 volt, single phase circuits required for the PC and the laser. 80 PSI air. $49,000 FOB OH Wood Truss Systems 888.288.9874

NEW! 8 1999 Alpine AutoMill Component Saw

Koskovich

Model 343-G, five-blade saw with (1) 20” blade, (3) 18” blades and Auto Omni (1) 32” blade. Cuts lumber lengths Component Saw from 13” 90/90 to 20 feet and sizes $19,900 FOB TX 2x3 to 2x12” depths. Touch screen oodTrussruss Wood inc. controls, digital display, powered Systems ystems angulation and length. Includes MANUFACTURERS’ REPRESENTATIVES conveyor and 480 volt, Combining the qualities and expertisescrap you should expect from an incline. industry supplier Toll Free: 3 phase, 56 Amps NEW 1999, five-blade Auto-Omni never unpacked from OEM shipment.

Toll Free: 888.288.9874

inc.

MANUFACTURERS’ REPRESENTATIVES

888.288.9874

This outstanding new computerized saw is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. Includes optional Matthews Ink-Jet Printer, spare set of blades, shaker-pan waste conveyor with OEM shaker side pans, includes fully complete spare parts kits, OEM system

PC with enclosure. This new saw is available for inspection, and is ready for many years of good service. Expert installation and support available from MiTek and other independent reps. 90 amp 208/230/460v, 3 phase, and 90 amp 120vac electrical service re-

$97,500 FOB WA NOW $69,900

quired.

Wood Truss Systems

inc.

2000 Alpine Speed Cut Mobile Little Framer

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

(Trailer Mounted Radial Arm Saw)

16” Blade, 24” Cross Cut x 6” Depth, 10 Degree to 170 Degree Angular Capacity, -5 HP / 220 Volt / 1 Phase. $4,500 FOB WA Wasserman & Associates 800-382-0329

GET RESULTS ! with the

Advertiser

2003 Alpine ALS Linear Saw 275c

Was $39,900 NOW $29,900 FOB TX

2006 TCT EZ Trimmer

cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 888.288.9874

8 PHONE: 800-289-5627

Toll Free: 888.288.9874

Linear fed saw Model #275C, cuts all truss parts from any lumber width, cuts bevels from 90 to 25 degrees, 60"+ scarf cuts, optimizes material, production rates +2000 pcs. / 8 hr. shift. Includes 20 ft OEM infeed conveyor and 15 ft OEM outfeed conveyor, Ink jet printer, and belt scrap conveyor. All servo controlled functions, 7.5 hp motor with (1) 20" carbide tipped blade. 240v 3ph

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

SAWS

January 13th, 2012 #05126 Page #8

Cloud Computing - Fast Forward to the Past The year was 1975. It was the “good old days” of computing, well before the notion occurred to have a computer on everyone’s desk. Most computing was done on mainframe computers with costs way beyond the reach of individuals or small businesses if they were to think about buying one for their use. That approach was pretty much limited to Fortune 500 companies.

2002 Koskovich Auto Omni Component Saw

Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900. Wood Truss Systems 888.288.9874

For a large number of people who needed to use computing, the answer was to buy time on a computer. Commercial entities arose that went into the business of buying mainframes and selling the use of that computer and data storage. Since the mainframe had to be in a single location, data communication networks had to be used to allow a remote user to access the mainframe. Thus, was born a business where the computing power, maintenance, backup, and other infrastructure was centrally located in one spot while users accessed remotely with “dumb terminals” with keyboards and printers. This solution alleviated the user from all concerns about the care and feeding of the computer and reduced computing cost.

SAWS

Fast forward 36 years. The industry has passed through the minicomputer era (quickly), into the microcomputer era and has achieved the Microsoft goal of “a computer on every desktop.” The computer and component industries seem to have achieved what they sought – unlimited amounts of processing and little microcomputers that we can carry around with all the application programs we like. Continued on page 12

Omega Round Web Saw

TRUSS EQUIPMENT

2003 Delta 16" Radial Arm Saw

Delta 33-411 16" Radial Arm Saw. Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22". Features "Turret Arm" construction which allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph power. $1,800 :: FOB OH Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

800-382-0329

2006 Omni Miser Wood Processing System R P ed r u ice ct io n

Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 888.288.9874

2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw

-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

2002 Hain Quick Rafter Cutter

Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

$70,000 FOB MB

-Model RT (Roof Truss) -Print System A (One Face) -Incline Live Deck -Bulk Feeder -5 Magazines (3-2x4, 2-2x6) -Roughly $275K when purchased in 2006

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

Don’t Forget! You Saw it in the

Adverti$er

January 13th, 2012 #05126 Page #9

TRUSS EQUIPMENT

800-382-0329 Design your own custom roof truss gantry!

Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 888.288.9874

2006 MiTek Infeed Deck

$33,500 FOB SC

2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity. Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 888.288.9874

2007 Klaisler Floor-Truss AgriStack AGS

Klaisler Agri-Stack AGS-02-0107, Heavyduty, 2 Pedestal stacker system consisting of two 2"x3" steel lift-arms, 2 stationary pedestals spaced 15' apart (15' total area), 2 aluminum upright arms, Sumitomo braking gear motors, two 6'x20' powered, 6 roller sections with 2.25 H,P, Sumitomo shaft1997 Pacific Automation Auto-8 mount gear-motors, stacks up to 40' floor (40’) Truss Press trusses with a 30-40 second cycle time. -8' x 40' Drilled & Tapped Steel Table Stacking operations controlled by reversing -50 Ton Hydraulic Press starter panel with independent motor -24" x 96" Platen overload protection control panel (push -Floor Truss Jig button controls included). Multi voltage -Press 2x4 and 4x2 with no adjustment. 208/230/460v, 3ph. $12,500 FOB SC. $29,500 FOB ID. NOW $18,900 Wood Truss Systems Wasserman & Associates 888.288.9874 800-382-0329 www.woodtrusssystems.com

1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System

-2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted) -Slotted Top Tables with Pop-up Skatewheel Ejectors -Powered Exiting Conveyor with Receivers -Tee-Lok 14’ Finish Roller -Dismantled & Stored in Early 2011

Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

8 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #10

Don’t Forget!

Adverti$er Join the Southern Pine Partnership!

You Saw it in the

TRUSS EQUIPMENT

Since 1915

8 2007 RAND / AIR SET / FLOOR TRUSS GANTRY / MD-10-30-40 2007 RAND AIR SET TRUSS 40' Roll Driven Floor/ Truss Machine / Builds / 10" FLOOR min to 30" max Deep Floor TrussesGANTRY 40' Roll Driven Floor Truss Machine / Builds 10" min to 30" max Deep Floor Trusses. $39,500. MD-10-30-14 FOB Arkansas

$39,500 FOB AR

770-434-1006 / Salter.com

As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org



Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

2007 IBS Int/Ext Wall Panel Line

800-382-0329

Features IBS sub-component nailer with conveyors, subcomponent table with pop-up skatewheel conveyor and autostop, 12' x 16' framing table with dollies, light bar and auto-stops, 12' x 16' sheathing/squaring table with multi-tool panel bridge, plate stitchers, autoreturn and bridge tilt, IBS Plant Net system with 6 terminals and stands, fiber optic cable with 16 port fiber optic switch, accumulation skatewheel and roller conveyors, jib crane with electric hoist and wall panel lift. System includes Lauderdale Hamilton chop saw with 16' Tiger Stop, IBS easy router, SSC panel saw, DeWalt chop saw with Grizzly dust collector, 4 tree carts, 2 material carts, 4 full-bunk carts. Excludes nail and staple guns.

2005 Robbins "No Rail" Roller Gantry System

e ic ion $72,000 r P ct NOW $69,000 du e FOB TX R

- 14’ x 130’ System with 2 Roller Gantries -2005 Robbins "Super Torque" 14' x 24" Diameter Roller Gantry (Trackless) -Slotted Top Tables with Pop-up Skatewheel Ejectors -Roof Truss Jig Hardware -Roller Gantry Park Sections -Powered Transfer Roller -Excludes Powered Exiting Conveyor & Finish Roller (available at additional expense) Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

$99,500 FOB MO FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

January 13th, 2012 #05126 Page #11

TRUSS EQUIPMENT

2 0 0 3 R o b b i n s " S u p e r To r q u e " 14' x 24" Diameter Finish Roller

TRUSS EQUIPMENT

R P ed r u ice ct io n

R P ed r u ic ct e io n

-230 Volt / 3 Phase -$9,900 FOB SK Wasserman & Associates 800-382-0329 www.wasserman-associates.com

14’ X 20’’ Clary with Dual Drive

1999 Alpine Mighty Mite Truss Assembly System

Page 7 No Change...

Reconditioned / F.O.B Windsor / Detroit. FOB Windsor/Detroit MI. SALTER & ASSOCIATES 770.434.1006 www.salter.com

-5’ x 20’ Table (needs new wood top) -(2) 4” Diameter Hydraulic Cylinders at 31,000 Lbs Each -240 Volt / 3 Phase / 5 HP Motor. $7,900 NOW $6,900 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 MiTek RoofTracker JSP System

14’ x 136’ trackless side-eject gantry. Includes (17) 6’-10” x 14’ slotted, 3/4” steel-top Jet-Set Pro ready tables with ejectors (results in lower cost conversion to MiTek Planx, Wizard PDS, or Retrofit to Alpine C4 AutoSet). Includes two (2) model 63750-501 RoofTracker gantry heads each with a 24” dia. X 14’ roll w/joy-stick control, (1) model 68300 24” final roller. System includes all air-manifold, jigging hardware, bridge-plates, etc. (conveyor seen in photos was previously sold with the opposite side system). 480V, 3 ph power. $149,900 FOB GA. Wood Truss Systems 888.288.9874

2005 MiTek RailRider End Eject Floor Machine

04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform. 24 roll -10HP motor w/electric softstart. Item F1026

End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks. Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 888.288.9874

No change to content - Page 12

Truss Machinery Connections 800-580-6430

2005 Koskovich Jet-Set

-Model 725M -15 HP Motor (208 Volt) -Safety Bars Wasserman & Associates 800-382-0329 www.wasserman-associates.com

23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 888.288.9874

Robbins

Pacific Automation s We have a wide selection of popular brands!

Alpine Speed Roll Kick Leg Floor Machine

Mitek

Jager Truswal

Clary 6 Ft. Finish Press

Six foot throat finish roller with 20" rolls. Presses 1 1/2" thickness. Push button controls. Includes (2) 2 foot wide roller conveyors, 10 feet long each. 240 volt, 3 phase. $3,900 NOW $1,500 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

2007 Alpine 15'-6" x 24" Diameter Finish Roller

Need a Finish Roller?

PHONE: 800-289-5627

TRUSS EQUIPMENT

Alpine CMF

Read/Subscribe online at www.componentadvertiser.com

Alpine Speed Roll, floor truss press includes gantry head with 20 inch diameter roll, steel table, kick legs, air-cylinder clamping, operator platform and end stops. Builds from 12" to 24" deep trusses, up to 40 foot long. Gantry has toggle forward / reverse & stop controls. Includes partial, overhead plate rack, (4) 78" wide idler conveyors & (4) 38" wide idler conveyors. 230 volt, 3 phase electrical. $9,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

January 13th, 2012 #05126 Page #12

Keymark: from page 8

So, what’s next, a fast forward to the past?

Cloud computing seems to be the emerging model – large server farms host all kinds of application programs and critical databases that need to be shared. Tremendous, inexpensive computing power enables users to remotely run intense applications more quickly than they could ever run them on their desktops. Modern data communication technology empowers remote users to pass data that the 110 baud data communicators in the good old days would have thought impossible. Collaborative design in which many participants in different locations access a shared data file or databases becomes possible, replacing older practices of passing pieces of paper around and driving back and forth to get them. Will cloud computing take hold in the home building and/or component industry? If so, what are the implications for those industries? Will the industry become much more smoothly functioning as precise data is shared among the various players? Who will create the data to be shared? How will component design occur in this model? Who will be the winners and losers? I’d like to hear your thoughts. Click Here for Blog Response Keith Dietzen Keymark Enterprises, LLC

PHONE: 800-289-5627

Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

2011 wound up slowly and in an organized manner for the North American lumber industry, and New Year’s business started with equal calmness. Lumber producers and wholesalers are all watching the skies, trying to estimate how long this good weather will last. There were no issues reported with transportation, quite unusual for this time of year. Industry players are taking casual bets on when the bad winter weather will swoop in and cause supply chain disruptions. Due more to restricted inventories than an uptick in lumber buying activity, prices on benchmark WSPF R/L KD #2&Btr 2x4’s jumped $17 since the final lumber trading week of 2011, to US$260 mfbm last week. Wides did significantly better, with 2x10’s surging an astonishing $44 to end the week at US$305 mfbm. Insiders suspect the jump in wide dimension lumber prices is due to continued depleted log supplies. With no large logs left in sawmill yards, there is no ability to process the wide boards. As yet, indications are that industry will continue to delay investment in the timber harvest until players feel assured that recovery is stabilizing. Inquiries from China have increased over the low volumes ordered in 2Q and 3Q, possibly in a run-up to Chinese New Year, which traditionally brings a halt to business in general as people travel to visit family members. Customers in America continued with the Just-in-Time lumber buying practices experienced for most of 2011. Its no wonder players are nervous about the weather; with no one stocking lumber inventory and very little logging activity, one major storm or disruption to transit will throw the entire market into turmoil. Proof that this dire scenario is indeed reality arrived just last week with unseasonal wildfires in Chile. The plywood operations of Celulosa Arauco’s paper mill site in the Bio Bio region, 280 miles south of Santiago, were destroyed. Losses included the plywood production facility, all plywood in storage, log piles, and 9,900 acres of the company’s forestry plantations. Plywood manufacturers and suppliers in the US reacted immediately by hiking prices, especially on the higher grade, sanded products. Canadian plywood prices were not, as of last week, affected by the fires in Chile. Uncertainty and a sheer inability to forecast anything in this uncertain market is causing solid wood buyers and sellers to simply guess at market conditions and to reserve action until they are forced to respond to circumstances as they occur.

Dimension Lumber Key Prices

For this week’s prices subscribe to Madison’s at www.madisonsreport.com

Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16

Read/Subscribe online at www.componentadvertiser.com

Last Week $260 $260 $250 $305 $258 $218 $310 $315 $200

Change +17 +5 -1 +44 +13 -2 -10 +25 +3 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

ASLC from page 4

The Board urges SPIB to proceed with all deliberate haste to complete this testing and analysis at the earliest opportunity.

Adverti$er

TRUSS EQUIPMENT

January 13th, 2012 #05126 Page #13

TRUSS EQUIPMENT

ASTM D-1990 does contemplate the development of design values for a single size and species cell. (See, Section 4.2.) The information submitted on this size and grade did, in the Board’s judgment, comport with D-1990 and applicable statistical principles. These No. 2 2x4 design values are approved with a recommended effective date of June 1, 2012, which will allow for their orderly implementation. Although given the facts, circumstances and controlling authority of this particular matter, the Board did not approve design values for the other sizes and grades and has recommended a future effective date, it cautions all interested parties to take note of all available information in making design decisions in the interim. The values in the SPIB proposal represent approximately a 25-30% reduction. Many of the critics of the proposal acknowledged that some reductions were in order, albeit the magnitude of those reductions was disputed. All design professionals are advised in the strongest terms by the Board to evaluate this information in formulating their designs in the interim period. The Board also wishes to commend the Southern Pine Inspection Bureau. The original testing did not contemplate the results that ensued nor was it designed to be a full matrix. Faced with sizable indicated reductions, SPIB felt obliged to expand the scope of its recommendations to other sizes and grades in an abundance of caution and in furtherance of its stewardship of the Southern Pine rules. Dated: January 11, 2012

Klaisler 6-40 Traveling Floor Machine

Tee-Lok Side-Eject 24" dia Gantry

165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware. System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Tell Them

You Saw it in the

Advertiser

2002 MiTek Tee-Tracker Gantry System

14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Your Ad Could be Here

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

January 13th, 2012 #05126 Page #14

Don’t Forget! You Saw it in the

Toll Free: 888.288.9874

Adverti$er

TRUSS EQUIPMENT

TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press

2001 Alpine (100’) Floor Track Gantry System #2

Combining the qualities and expertise you should expect from an industry supplier

2004 MiTek RoofGlider Gantry

94 foot working length, MiTek side-eject system featuring 14 feet working height, tracked system with (12) 6’4” x 14 foot, slotted 3/4” steel-top tables with ejectors

and (6) slots per table. Includes (1) 14’x24” dia. gantry head with operator platform, (10) stand-alone receivers, (20) powered conveyors, (15) idler conveyors, powered transfer roll, air-manifold, gantry head electrical chord system, bridgeplates and Tekset jigging hardware. 208v, 3phase electrical.

$59,900 FOB UT

Tell Them

You Saw it in the

TRUSS EQUIPMENT

Toll Free: 888.288.9874

inc.

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

$34,500 FOB TX

Mitek Lumber Splicer

HP Hydraulic System. 3" x 12" Maximum Plate Size (2x4 Material). Magnetic Platens for Plate Placement. Pneumatic Lumber Clamps. Foot Pedal Control for Clamping, Dual Push Button Control for Pressing. $4,750 FOB WY Wasserman & Associates 800-382-0329

Clary Kick Leg Floor Machine

Floor truss press includes gantry head with 20 inch diameter roll, steel table, kick legs, air-cylinder clamping, operator platform and end stops. Builds from 12" to 24" deep trusses, up to 40 foot long. Gantry has toggle forward / reverse & stop controls. Includes partial, overhead plate rack. 230 volt, 3 phase electrical. $11,900 FOB TX NOW $5,900 Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Advertiser

Wood Truss Systems

R P ed r u ice ct io n

TRUSS EQUIPMENT

2001 Alpine (100’) floor track gantry system / (1) 7.5 HP 24” gantry head / Model 705 / SN 705A1007/ (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase / purchased new 2001 Mechanical: 4½ Stars Appearance: 4 Stars As-Is/Where-Is: FL Salter & Associates 770-434-1006 www.salter.com

6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase . FOB GA Salter & Associates 770-434-1006 www.salter.com

2006 MiTek TK-8 Clamp System

MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 888.288.9874

PHONE: 800-289-5627

2001 Alpine (100’) floor track gantry system / (1)

7.5 HP 24” gantry head / Model 705 / SN 705A1006 / (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase. FOB FL. Salter & Associates 770-434-1006

2002 Tee-Lok/MiTek Tee-Tracker Gantry

14' x 72' side-eject, trackless gantry equipment with (10) 6' x 14' slotted, 3/4" steel-top tables with ejectors, (8) powered and (20) idle outfeed conveyor (140' @ 5' o.c.), (1) Tee-Lok Tee-Tracker gantry head. 14' x 24" diameter roll, featuring pendant control, Demag Gmb motor & drive components with auto-lube. Includes electrical festooned cable, (50) pucks, (18) aisle plates, (6) straight bars, (3) ejector plates and (2) T-bars. Also included is (70') power transfer roll [(4) (10.5') sections and (2) (14') sections]. 460v, 3ph, 60Hz. (Additional tables, conveyor, and MiTek gantry head available)

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

January 13th, 2012 #05126 Page #15

Don’t Forget! You Saw it in the

Toll Free: 888.288.9874

Adverti$er WALL PANEL EQUIPMENT

WALL PANEL EQUIPMENT

Combining the qualities and expertise you should expect from an industry supplier

2007 MiTek Custom RoofTracker Gantry System $56,700 FOB TX

2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

Reconditioned Panels Plus 10’ x 20’ Framing Table

-Stud Locators & Pop-up Skatewheel Conveyor on Framing Table -Motorized Telescoping Arms (for wall height adjustments) -No Rail or Track on Floor Increases Operator Safety and Simplifies Clean-up -Excludes Tool Dollies on Framing Table. $9,900 FOB NE. Wasserman & Associates 800-382-0329

70' side-eject, trackless system includes (6) MiTek OEM modified JSP (Jet Set Pro ready) 6'-10" x 14' slotted, 3/4" steel-top tables w/ejectors and (3) Tee-Lok 6’ x 14’ slotted, ¾” steel top tables with ejectors. Features OEM modified 2007 MiTek RoofTracker Gantry head 14' X 24" dia. with operator platform, toggle controls and auto-lube. (Only 520 hours) and 2006 MiTek final press Model 68300. System includes (70’) of powered transfer roll [(4) (10.5') sections and (2) (14') sections], 140’ outfeed conveyor (8) powered and (20) idle conveyors. Also includes airmanifold, electrical festooned cable with mast, (50) pucks, (16) aisle plates, (4) straight bars and (2) T-bars. Includes, 14’ x 24” diameter rolls, panic bars and push-button controls. 460v, 3ph (tables and gantry head designed to fit Tee-Tracker systems only).

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer

Building Components Industry Advertising Sales

With 3 years of publishing history, the Component Manufacturing Advertiser is growing. We need someone who can work closely with industry suppliers to develop long term advertising relationships. Yes you will have a start up curve, but as any true sales professional knows, this can be a money maker once your sales turn into advertising orders and residual income builds. There is only one sales rep position, no territories. This is a high commission only job, but with a residual income potential that can justify a full time effort. The compensation plan has yet to be developed and is open to negotiation.

Contact Thomas McAnally in Strict Confidence twm@thejobline.com or 800-289-5627

Pending 800-382-0329

2007 Alpine Model 759A FloorMaster 40' Floor Truss Machine

-24” Diameter Trackless Gantry -Powered Truss Flipping & Ejection -Clamp Cylinders Under Table - O n Ta b l e C h o r d S p l i c i n g -Overhead Plate Rack -10 HP Motor (208 Volt) -Floor Truss Depths from 12” to 24”

PHONE: 800-289-5627

2005 Triad

Wall Panel Line

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

System includes a 16' long Diamond Quad framing table that builds wall heights from 6'-9" to 12'-3" with quick release feature for VTP, powered pop-ups, (26) Duofast guns, Triad Generation II squaring/ sheathing bridge with laser indicator and side shift, router bridge, (4) 36" wide x 15' long transition conveyors, (1) 1-ton panel hoist, (2) plate carts and (6) standard Triad carts. 120 volt, single phase electrical.

$46,900 FOB TN Read/Subscribe online at www.componentadvertiser.com

$34,600 FOB CO

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #16

Don’t Forget! You Saw it in the

Adverti$er

Toll Free: 800-382-0329

Buy/Sell Used Equipment & Manufacturers’ Representative

ALL Reasonable Offers Considered!

1999 Tee-Lok 40' Floor Truss Machine $19,900 FOB SC

Hydro-Air Beaver B-80 Floor Truss Machine $4,900 FOB IA

2000 Genie Model S-40 Manlift

-40' Reach -500 LB Capacity -Dual Fuel Engine -4x4 - 3,203 Hours

PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker

$22,500 FOB NE

FOB: LA $12,900.00

in d

2007 Lauderdale Hamiltion Up-Cut Saw with Mango Plate Marker

Klaisler 14' x 24" Diameter Roller Gantry (Recessed Track). (10) 14' x 76" Steel Slotted Top Tables (WEG-IT) with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers -Excludes Finish Roller.

29,500 FOB IL

R P ed r u ice ct io n

2005 Pratt 36'-50' Stretch Roll-Off Trailer -Sliding Tandems -Hydraulic Neck

2003 Klaisler 14' x 78' Side Eject Roller Gantry System

$17,900 FOB LA

Lauderdale Hamilton 24” Super Chop Up-Cut Saw. Mango Plate Marker with Touch Screen Computer. 10’ Infeed & 20’ Outfeed Roller Conveyor with Stands. Dust Collection System.

$14,900 FOB LA

2004 TCT EZ Trimmer

2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies

$10,900.00

NEW Panels Plus 12' x 16' Combination Framing/ Sheathing Table

$84,500 FOB MN

-2x3, 2x4 & 2x6 Capacity -Double Bevels on Pitches from 0/12 thru 12/12 -230 Volt / 3 Phase

$6,250 NOW $5,750 FOB LA

FOB TN

Used Norfield Magnum Door Machine & Used Norfield 250M Strike Jamb Router $12,000 FOB OH

Why Buy From Wasserman & Associates?

We offer One Stop Shopping and Competitive Pricing on Complete Systems! PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

WALL PANEL EQUIPMENT

2007 Panels Plus Sub-Component Nailer

-Maximum Opening: 17" x 17 1/2" -On/Off Switches for Each Nail Gun -Button to Activate Squaring Stop -Foot Pedal to Activate Clamping -Excludes Nail Guns $7,950 FOB OH Wasserman & Associates 800-382-0329

January 13th, 2012 #05126 Page #17

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

WALL PANEL EQUIPMENT

Panels Plus Manual Framer

16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 888.288.9874

Adverti$er WALL PANEL EQUIPMENT

2007 Panels Plus 12' x 16' Framing Table with Tool Dollies

-(2) Three Gun Tool Dollies with Remote Fire & Clamp -Stud Locators at 16" & 24" O.C. -Pop-up Skatewheel Conveyor -Powered Height Adjustment -Adjustable Squaring Stops -(2) Pair of 15' Skatewheel Conveyor with Stands -Excludes Nail Guns FOB: LA - $16,950.00 Wasserman & Associates 800-382-0329

WALL PANEL EQUIPMENT

Wall Panel Equipment Accessories

$850 - 2006 Panels Plus Handle Bar Router $850 NOW $750 - Used Panels Plus 15' Skatewheel Conveyor with Stands (per Pair - 7 Pairs Available) $1,500 - 2005 Panels Plus Sub-Component Layup Tables $1,500 - 2007 Safety Speed Cut H4 Vertical Panel Saw $2,900 - Used Triad CN-4 Sub-Component Nailer $4,900 - 2004 Viking Fastrac 10' Portable Sheathing Bridge $145 Each - 2006 Associated Machinery 36" x 60" Material Carts - 7 Available $950 - NEW Wind Brace Saw for Wall Panel Metal Brace Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEED HELP WITH YOUR PANELS PLUS EQUIMENT? We offer:

Disassembly & packaging of equipment. Installation by trained personnel. Adjustment and calibration of equipment. Training for operators and maintenance workers. Recommend upgrade options. Assistance in getting your fastening tools mounted and operational.

Contact Information:

email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

January 13th, 2012 #05126 Page #18

Don’t Forget! You Saw it in the

Adverti$er

2008 Moffett Forklift & '96 Fruehauf 45' Flatbed Trailer Moffett model M80 BC forklift, 70 hours, 8,000 lb. capacity with fork extensions. Fruehauf flatbed trailer is balanced for the lift. Ideal for wall panel deliveries.

$54,900 FOB MO

Toll Free: 888.288.9874

www.woodtrusssystems.com

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

MiTek PCS Component Express Conveyor M i Tek / P C S C o mp o n en t Express conveyor, transfers wall subcomponents & parts between nailing stations and a framing station. Toggle controls, (2) 18” wide conveyors, 5 feet long each, included. 1 HP motor. 480 volt, 3 phase.

$3,200.00 NOW $1,500 FOB TX

Toll Free: 888.288.9874

www.woodtrusssystems.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

Adverti$er

You Saw it in the

TRUCKS & TRAILERS

TRUCKS

TRAILERS

TRUCKS

TRAILERS

R P ed r u ice ct io n

TRUCKS & TRAILERS

January 13th, 2012 #05126 Page #19

1994 Wabash T-30 Trailer

2005 36’ gooseneck tilt trailer Includes in-bed hitch

2008 Precision 42-60' Stretch Roll-Off Trailer (4001c)

8,870 Lb Capacity, Dual Fuel, 1199 Hours Optional Fork Extensions are Available. $27,800 FOB LA Wasserman & Associates 800-382-0329

Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Page 15 270 Cummins Engine with 111,000 Miles No-Change 2,939 Hours on National Crane, New... Paint 1999 Volvo Truck with National 500D Crane

MAKE AN OFFER!

2007 Komatsu FG45T-8 Forklift

R P ed r u ice ct io n

48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 888.288.9874

(manufactured 12/19/05) MD 06 Ultralight Weight / Vin 1P9GR36226F554005 / 20k Axle / 25,900k GVWR. Electric / brakes 90% / Tires 90%. FOB LA Salter & Associates 770.434.1006

on National Crane & Truck Frame. Tires are 90% . $65,000 NOW $45,000 FOB ND Wasserman & Associates 800-382-0329

Price Reduction 01 Haulin (Stretch 48 -70 )

2000 Raglan Trailer 48’

2004 Pratt 48' Roll-Off Trailer

48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 888.288.9874

We go to any lengths to expand your opportunity. PHONE: 800-289-5627

-Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com

$8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust. Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430

You find the opportunity -- we’ll build you the products to meet it. Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #20

Don’t Forget!

Wood Truss Systems

You Saw it in the

Adverti$er

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

R P ed r u ice ct io n

Combining the qualities and expertise you should expect from an industry supplier

2005 Robbins No-Rail Gantry

14'x180' trackless gantry with aisles. Includes (2) gantry heads, (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive. System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 440v, 3phase. Seller is willing to sub-divide this system. $79,000 NOW $59,000 FOB TX

2008 IBS Yard Barn Wall Panel Line

$24,900 FOB MI

Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI

2004 Ruvo 925 Door Machine

2005 (8) Projector SL Laser System

Eight-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.

R P ed r u ice ct io n

Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA

Klaisler Finish Roller Press

$62,600 :: FOB AZ Condition: Good

Unit refurbished in 2002 and a new, OEM roll by Klaisler, added in 2003. Features two 5 HP motors with a frequency drive, two 18 inch diameter rolls, 14 foot wide throat, push button controls, emergency stop, safety bars and limit switches. 440 volt, 3 phase electrical. $8,700 NOW 5,900 FOB MN.

Fax: 765-288-9991 PHONE: 800-289-5627

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

Phone: 765.751.9990 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #21

Don’t Forget!

Wood Truss Systems

You Saw it in the

inc.

MANUFACTURERS’ REPRESENTATIVES

Adverti$er

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

R P ed r u ice ct io n

$9,900 FOB CA

2004 Hain 60 Ft xMeasuring System

1990 Tee-Lok Finish Roller Press

Tee-Lok finish press with 24” diameter rolls, (2) 5 HP motors, panic bars, push button controls and infeed idler rollers. 230/460 volt, 3 phase.

$4,900 FOB MN

2005 Koskovich Auto Omni $52,900 FOB UT

NOW $49,900

Hain Company measuring device model MEA, 1/4 HP electrical linear actuator unit with steel stops and pusher, 60 foot long, measures lengths in feet, inches and fractions of an inch. Includes conveyor with legs and 2" x 4" x 1/4" aluminum extrusion. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. 110 volt electrical.

2005 MiTek Roof Tracker System

SO LD

14' x 84' trackless side-eject gantry. Includes (11) 6'-4" x 14' slotted, 3/4" steel-top tables with ejectors. Includes one (1) model 63750-501 RoofTracker gantry head with a 24" dia. X 14' roll w/joy-stick control. System includes all airmanifold, overhead tracked electrical system, limited jigging hardware, bridge-plates, two (2) parking sections. 460V, 3 ph power.

$79,900 FOB OH

1999 Sterling Tractor

Klaisler End-Eject Gantry System

Klaisler end-eject gantry, professionally refurbished in 2002, 61’ working length, light duty since the refurbishing. Includes (10) 56” wide tables with end-eject, pop-up ejector rollers and 30” steel bottom chord, drilled and tapped, with plastic above. Includes (1) 18” diameter gantry head with (2) 5 HP motors and (1) Klaisler finish press, 18” diameter rolls, 230/460 volt, 3 phase electrical.

$19,900 FOB MN

Fax: 765-288-9991 PHONE: 800-289-5627

1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5" tires, 180,000 miles, 8LL transmission and passed DOT inspection

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

$11,900 :: FOB CO

Phone: 765.751.9990 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

Adverti$er

January 13th, 2012 #05126 Page #22

MISC.

800-382-0329 www.wasserman-associates.com

Truck & Trailer Values get You Rolling NOW!

2005 Pratt 36'-50' Stretch Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck

R P ed r u ice ct io n

1997 Ford Truck with 2002 PM Knuckle Boom Crane

$49,900 FOB ND

-New Paint PM Crane Model 14024 -Dual Side Controls -40'-8" Reach

1995 Wabash 36'-50' Stretch Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires

$22,500 FOB OH.

1997 Ford LTL A9000 Truck -Engine: Series 60 Detroit 430 HP -12,000 LB Steer Axle -40,000 LB Rockwell Differentials 3:58 Gears -Transmission: 10 Speed RTLO 15610B

Location: CO Price: $9,900.00

2004 Kaeser ASD 40 Compressor With Dryer and Reserve Tank

Kaeser screw type compressor model ASD 40, part number 100628.1, serial number 1009. Up to 191 CFM at 125 PSI, 159 CFM at 175 PSI, and 125 CFM at 217 PSI. Features a 40 HP motor, direct drive and Sigma digital controls, along with a Kaeser dryer model TD 51, part number 1.8034.10010, serial number 1042. Includes 300 gallon system storage tank. 460v, 3ph power. $10,780 FOB OH Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

-400 Degree Rack & Pinion Rotation -Check Valves on All Cylinders -Overload Relief Valves -Hydraulic Load Limit Device -Dual Outriggers w/19'-8" Span -New Paint

2004 Volvo VNL64T300 Truck

-Engine: D12-435, 435 HP, 1550 Torque, 342,000 Miles -Transmission: ZF Meritor MO-15G10A-M15 -Tandem Axle, 40,000 Lb Rear Axle Capacity -3.73 Rear Axle Ratio w/Interaxle Diff. Lock -Wabco ABS Brakes & Exhaust Brake -200 Gallon Diesel Capacity -Day Cab with Aero Cab Package -Reference Photo 2 for PDF Photos

$37,500 FOB MO

PHONE: 800-289-5627

Lumber/Teeter Carts

-20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Kubota Diesel, 5500 Lb Capacity, 10' Mast, 1000 Hours, Pallet Forks, Side Shift, Tilt, Serviced w/50% Tires. 2002 Great Dane 42' Flatbed, 42' x 96", Headboard, Toolbox, Winches and Straps, Aluminum Wheels, DOT Inspected, Moffett Mount Kit.

FOB OH $17,900.00

2004 Moffett M5500 Piggyback Lift with 2002 Great Dane 42' Flatbed Trailer

Read/Subscribe online at www.componentadvertiser.com

Federal Pacific Transformer Company 45 KVA Step Up Transformer (240 to 480 volts) 45 KVA @ 150C Rise IMP 5.10%, High Voltage 480 (H), Low Voltage 240/120 LT (X), Weight 345 lbs. , 60 HZ / 3 Phase, 220 C Insulation System FH4G, Ambient Temp 40C Max, / Series 4192 / File E7783 / Catalog # T43T45 Salter & Associates 770-434-1006 www.salter.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #23

Don’t Forget! You Saw it in the

Adverti$er

Wood Truss Systems

Toll Free: 888.288.9874

inc.

Price Reduction

800-382-0329

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

2006 Omni Miser Automated Material Picking System $89,000 FOB SD

-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000! Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!

Click for WoodRunner Details: http://apexmw.com/ MISC.

2005 Williams Pulverizer

Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.

$8,000 FOB TN

MISC.

1987 Jager TTS Auto Lumber Stacker $14,900 FOB NB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

MISC.

2004 MiTek Lumber Splicer

MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen. Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Your Ad Could be Here 2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Advertising Rates & Forms

Advertising rates and forms are available at

www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Don’t Forget! You Saw it in the

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

Adverti$er

January 13th, 2012 #05126 Page #24

MISC.

NEW SnoVantage Skidsteer Snow Plow

WoodRunner by Apex Machine Works $114,900 FOB MN

Wing Span Open: 20', Closed: 9 1/2' . Center Section: 7 1/2'. Wings: 6' . Front Skin: 10 Gauge. Rear Structure: 1/4" & 5/16". Aeroquip Hydraulics. $8,500 Retail, Now $6,000 FOB ND. NOW $5,000 Wasserman & Associates 800-382-0329

McGlaghlan EX-50 Lumber Carousel

The WoodRunner is a revolutionary step forward in automated lumber retrieval systems. As a totally automated system, the WoodRunner eliminates the costs and limitations associated with manulally fed saws. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Mizer, Alpine's ALS and other linear saws. Click on the photo for additional images, a brief VIDEO, or to download a Brochure and a footprint layout for Wood Runner Miser Specs or Wood Runner Alpine ALS Specs.

MISC.

Model EX-50 Expediter, lumber carousel, seven (7) station, nominal 50 foot diameter, material handling system with track. Maximum bunk length 20'. Includes toggle controls and 5 HP, hydraulic drive motor. 240 volt, 3 phase electrical. $8,900 FOB TX. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

MISC.

2003 Virtek LPS-6R Laser System

2005 Kaeser ASD-25 Compressor, Dryer & Tank

1999 Holz-Her Accura "S" 14' Beam Saw

Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329

PHONE: 800-289-5627

Kaeser screw type compressor model ASD 25, serial #100618-10001 with a 25 HP motor, belt drive and digital controls, along with a Kaeser dryer model KAD-115. Includes one large storage tank. $6,500 FOB TN. Wood Truss Systems 888.288.9874

McGlaghlan EX-30 Lumber Carousel

Model EX-30 Expediter, lumber carousel, seven (7) station, nominal 30 foot diameter, material handling system with track. Maximum bunk length 16'. Includes toggle controls and 5 HP, hydraulic drive motor. 240 volt, 3 phase electrical. $7,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

Virtek truss projection system, quantity of fourteen (14) model LPS-6R red-laser heads, with 16’ coverage each, system PC. Heads have been under OEM maintenance agreement since new, Windows 2000 PRO O/S, Virtek TrussLine version 4.4/1.118. Virtek license agreement required, Virtek maintenance agreement suggested (call for additional cost estimates).. $6,195 and $4,950 each FOB OH. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

MISC.

Refurbished 2005 Hain 20Ft. Measuring System

2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

January 13th, 2012 #05126 Page #25

Don’t Forget! You Saw it in the

MISC.

2007 Kaisler Rolsplicer

Splices in vertical orientation and forces lumber together (compression) prior to plate pressing, single operator easily trained to accomplish accurate, reliable splices. Splices 2x3, 2x4 and 2x6 lumber. Includes two recessed simultaneous activation buttons, guarded motors and sprockets, and a 3 HP motor. Includes 10 foot infeed and 20 foot outfeed conveyors. 460v, 3 phase Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Adverti$er MISC.

MISC.

Like New Altman Model 122 Dustless Sheetrock Saw

Call for Price. FOB NE. Wasserman & Associates 800-382-0329

Murphy-Rodgers MRT-9A Dust Collector

-Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums

Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada. Advantages: -Reduce Waste -Positive Ecological Impact -Produce Straight Material $79,900 FOB MO Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 Allison Material Carts

Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

PHONE: 800-289-5627

Hain Powered Measuring Systems

-20' Hain Measuring System with Conveyor & Stands (No Infeed Conveyor) -15' Hain Measuring System with Infeed & Outfeed Conveyor & Stands $2,900 EA FOB NE Wasserman & Associates 800-382-0329

inc.

Toll Free: 888.288.9874

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

Ingersoll-Rand Rotary Screw Compressor with Dryer Condition: Good Ingersoll-Rand rotary screw air compressor, model UP6-15c-125 with a Domnick Hunter DRD100 dryer. Compressor features a 15 HP motor with a maximum pressure of 125 PSI and 3 ph power. Dryer features a 3/4 HP motor, 115v, and single phase power.

Price: $4,495 :: FOB SC

Advertiser

Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp.

Wood Truss Systems

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

with the

Cut-Off/Shaper Unit. 5 HP Saw to CutOff Angles. 25 HP Cutter Head to Shape/ Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp.

GET RESULTS !

NEW Monet DeSauw Wood Finger Jointing Line

Virtek Laser Projection Heads

QUANTITY ten (10) red-laser heads (only) for up to 140 ft. projection @ 16' ceiling ht. Heads are model LPS-2D that were under OEM maintenance agreement since installation. Virtek license agreement required, OEM inspection required to obtain continuing maintenance agreement and installation. Contact us for serial number history per OEM records. $39,900 NOW $29,800 FOB IN. Wood Truss Systems 888.288.9874

$990

MiTek Peak-up Stackers (Qty. 3) HD Drive System, Auto Indexing, spring assisted receiver arms, holds up to 30 trusses from 16’ to 60’ in length with 40 sec. average cycle time. Quantity of 3, price is per unit.

$15,900 ea | FOB MI

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

MISC.

Don’t Forget! You Saw it in the

Tell Them

You Saw it in the

Advertiser

Wood Truss Systems inc.

Adverti$er

MISC.

bargain basement

2005 Hain Sub-Component Nailer

2005 Hain Sub-Component Nailer Model SCN - Sub-component assembler includes optional set up for coil fed nail guns. This model SCN handles 2x4 and 2x6 material and requires 100 PSI of air along with 120 volt electrical service. Includes automated off-feed system, ten foot long infeed and outfeed conveyors. System INCLUDES over 20 boxes of 10Dx.131 coil nails (4,600 nails per coil). $10,820 FOB MI. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

January 13th, 2012 #05126 Page #26

Priced to move - offers welcome NEW Strong Hold Topview Computer Cabinet

-26" Wide x 24" Deep x 66" High with 6" Legs -Polycarbonate Window -Welded-In 12" Deep Keyboard Shelf -Three Point Locking System -Fan for Hot Air Evacuation -2 Adjustable Shelves in Lower Cabinet $950 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Toll Free: 888.288.9874

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1997 PCS Hercules Auto-Feeder

Three (yes 3) Idaco Componamatic Saws plus One (1) Speed Cut Parts Saw Location: IL Price: $5,250.00 For All 3 Componamatics -2 Working Saws, One Parts Saw -2 Scrap Conveyors

12 7 Manual Component Saws - $7,500 & Under $6,900 - FOB NE - 1989 TimberMill 6-20 Component Saw $7,500 - FOB NE - 1995 Clary Master 5 Blade Component Saw $7,250 - FOB AB - 1990 TimberMill 6-20 Component Saw $7,000 - FOB AZ - Mid-90’s Mitek Easy Set 1000 Five Blade Component Saw $5,500 - FOB MI - 1992 Mitek Easy Set 2000 Five Blade Component Saw $5,000 - FOB VA - Clary 4 Blade Component Saw $4,900 - FOB MT - Idaco Componamatic 4 Blade Component Saw

3 Used Lumber Splicers - $2,000 & Under (OH, IL & IA) Used Tee-Lok 14’ x 78’ End Eject Roller Gantry System Location: MI Price: $19,900.00 NOW $16,900 Tee-Lok 14’ Roller Gantry (Track Mounted) (10) 6’ x 14’ Tables with Pop-up Roller Conveyor (For End Eject) Roof Truss Jig Hardware Tee-Lok 14’ Finish Roller Add $4,000 $3,500 for 2nd Tee-Lok 14’ Roller Gantry Add $5,000 $4,250 for 2nd PE & E 14’ Finish Roller

Pending

Used Stair Clamp - FOB NE - $1,500 -Hydraulic Clamping - 240 Volt / 3/4 HP / 4 Amp Motor -(8) 9” High Side Clamps - 148” Frame Length - 34” to 50” Clamp Width NEW Wind Brace Saw for Wall Panel Metal Brace - FOB NE - $950 Used Idaco Webmatic 4 Blade Web Saw FOB: MN - $9,900.00 NOW $7,500 -Manual Angulation -16’ Capacity Waste Conveyor & Short Incline Conveyor to Adjacent Saw - 480 Volt/3 Phase Add $4,000 for 22’ Live Deck with 7’ Skatewheel Conveyor Extension

$4,499 FOB SC Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed. 460V, 3ph. PHONE: 800-289-5627

Used Full House Assembler FOB: OK - $1,900.00 Assemble Interior & Exterior Doors & Jambs Height: Up to 8’-0” - Width: 1’-0” to 8’-0” -Excludes Staple Guns

Toll Free: 800-382-0329

www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

RUVO 512 Strike Jamb Router

-Jambs up to 1 1/4 x 10" x 9' -Strike Mortise up to 6" -Adjustable Jamb Stops -Foot Pedal Clamp -Porter Cable Router -120 Volt / 20 Amp FOB: MO Price: $1,500.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Adverti$er

Door & Stair Equipment

800-382-0329

R P ed r u ic ct e io n

Door & Stair Equipment

January 13th, 2012 #05126 Page #27

2001 Norfield Signature Series Magnum Door Machine

Includes Nasco Model WP-539 Auto Feed Screwdriver & 2 Routers. $19,900 FOB AZ NOW $16,900 Wasserman & Associates 800-382-0329

1985 Norfield Magnum II Door Machine $9,900 NOW $8,500 FOB AZ

Roller Table (16' x 5' x 32")

Norfield 1020 Double-End Trim Saw

Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 888.288.9874

-Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

new equipment showcase

Reconditioned 1999 Norfield 3800 LRO Door Lite Machine

Window Lite Cutting, Cylinder Lock Boring, Latch Drilling, Faceplate Routing, Overhead Template. $12,500 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #28

Don’t Forget!

Adverti$er

You Saw it in the

new equipment showcase

On the Cutting Edge...

New! Porta Field Press

New! Roll Splicer

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Folding Measuring System (FMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

The Table Measuring System (TMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller version.

Features: • • • • • • • •

Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area

Call 770-434-1006 For Details Salter & Associates www.salter.com

We go to any lengths to expand your opportunity. PHONE: 800-289-5627

Features: • • • • • • • •

The Portable Measuring System (PMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place

The Manual Measuring System (MMEA) adjusts quickly with a turn of a handle without changing the operator's position on the line.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds. Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com

Phone: 530.295.8068

Fax: 530.295.0468

Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Job Opportunities IMMEDIATE OPENING .com, inc. Georgia 800-289-JOBS SeniorinDesigner - Truss Truss Designers

JobLine

The

Adverti$er

Time To Hire? We’re here when you need help!

www.thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! IMMEDIATE OPENING Estimator - Truss

Location: Mid Atlantic Estimator for Single Family Custom, Commercial, and Multifamily. Must have experience with MiTek eFrame for estimating. Truss Design is not the main focus of this job. Other pre-screening specifications apply Compensation: $20hr.+- ($50k+- w/OT) based on ability and experience. Relocation assistance is negotiable. Priority for low cost and no relocation candidates. ID: J10475

IMMEDIATE!

This opportunity is for a specific type of Truss Designer. If you have scored in the Senior Designer or upper levels on the JobLine Design Skills Evaluation using ONLY a calculator, in what we consider a very fast completion time, your skills are perfect for this position. If you are knowledgeable in designing high end, complex projects that are detailed and require exceptional ability, and thrive on challenges and are willing to learn new approaches, this may be what you have been looking for. The company will invest in your training, both initially and ongoing to keep your skills at peak performance. Because of that, no job hoppers will be considered. We have specific instructions on what type of candidate they will accept, and we will be closely screening candidates for this opportunity. This is the perfect chance for someone who is topped out at their current employer to move up in responsibility and compensation. Priority is for currently employed superstars, but if you were laid off and have been a top performing Senior Designer in the past 1-2 years, don't pass this one up. Compensation: Starting salary is open, but expect to show your abilities before you get top compensation. Designers at the level we need for this position can make in the $70's and more, based on performance. That is 2011 numbers, not back in the good olé days. Benefits include: Medical, Dental, Vision, 401K and/or other retirement programs. Relocation is acceptable and expenses are open to negotiation for the right candidate. ID: J10473

@JobLine

NOW!

send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com Strictly Confidential! Sales/Plant/Design/Estimating Manager

Are you a multi-tasker with the ability to grow sales, lead design, and manage operations for a plant that has potential to produce $20M? The job requires someone who has experience with total takeoff, design/layout/engineering using MiTek software, manufacturing operations, and managing multiple department while focusing on growing sales. The ideal candidate will have either been a GM or past owner, who came up through the business in manufacturing, design or sales. If this is a possible match for what you are looking for, let's talk! The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Design Manager Truss/EWP/MiTek

Building Components Industry Advertising Sales How Can You Help Us Grow? With 3 years of publishing history, the Component Manufacturing Advertiser is growing. We need someone who can work closely with industry suppliers to develop long term advertising relationships. Yes you will have a start up curve, but as any true sales professional knows, this can be a money maker once your sales turn into advertising orders and residual income builds. There is only one sales rep position, no territories. This is a high commission only job, but with a residual income potential that can justify a full time effort. The compensation plan has yet to be developed and is open to negotiation. Contact Thomas McAnally in Strict Confidence twm@thejobline.com or 800-289-5627 PHONE: 800-289-5627

Needed

New opening for a seasoned Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities.. The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family. Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region. Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here. Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program. Thom's Notes: US Candidates must have a two year degree or training certificate in a drafting/design or cad related field and 3 years experience in the job to be considered. J10452

Read/Subscribe online at www.componentadvertiser.com

January 13th, 2012 #05126 Page #29 Multifamily Modular Design Manager

West coast. Professional opportunity at the corporate office, not the plant. Must have Multifamily and modular building experience. Engineering or Architectural Degree preferred but will consider modular design management experience as a factor. The Modular Design Manager will be responsible for developing product designs for projects, new product innovation, and business development support. This person will drive product design and engineering, quality assurance, code compliance, and alignment with our sustainability standards. The Modular Design Manager will develop green technology specifications that are cost effective. This person will monitor production and sales related to procedural compliance, quality control, manufacturing engineering, and cost reduction programs. This position is based on the west coast, and will require frequent weekly travel to manufacturing and client locations. Key Requirements • Minimum 5 years experience with systems-built structures and third party submittal procedures; • 4-year degree in architecture or related field; • Complete working knowledge of design, structural and plan approval packages, and all building code requirements, including, but not limited to, (a) UBC, IRC, CBC, Commercial Building codes; • Strong experience with drafting software such as AutoCAD; • Familiarity with lean manufacturing operations methodology; • Experience working closely with engineering and manufacturing for integrated design implementation. • Experience with multifamily and commercial construction projects $90-120K+- ID:Mod12001

LGS Truss Designer - South

New opening for an LGS Designer with Aegis software experience. $35-50k. Relocation assistance negotiable. The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Catch us on thejobline.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

Adverti$er

January 13th, 2012 #05126 Page #30

Available candidates

JobLine.com, inc.

The

800-289-JOBS

Time To Hire? Weâ&#x20AC;&#x2122;re here when you need help!

www.thejobline.com

These and additional candidates are available through theJobLine. com, Inc. All inquiries are strictly confidential. Fees are contingency based and only due if you hire or engage a candidate we present. Low cost, flat rate fees quoted upon request. Contact Thomas McAnally thom@thejobline.com www.thejobline.com 800-289-5627 x 1

Multifamily Designer/Design or Plant Manager - Truss/Panel

Supervise wood truss design/pricing department for single, multifamily, and commercial construction for a $28 million plant. Perform recruiting, training and management of design staff. Complete design and engineering of complex truss systems. Develop design department procedures, training program, and methods to measure productivity for all of the Eastern Division plants. Assisted with training new Managers in company procedures. Prior experience as Plant Manager & Production Manager of truss & panel plants, 25+ production workers. MiTek, eFrame, PanelBuilder advanced user, CAD, Excel, too. Compensation: $55k+ Relocation: USA - ALL States ID: C11051

Catch us on thejobline.com PHONE: 800-289-5627

Senior Designer - Truss/Panel/ Wood or Steel

As a production designer I produce between $200,000 - $300,000 per month in cold form steel roof truss designs, mostly commercial projects. As a designer the majority of my projects are being built in the pacific northwest and military projects in California, shipped from our facility in Colorado. Contact the customer: Many of my projects are "design/build", extensive contact with Architects and Engineers is required to problem solve engineered truss to bearing connections, progressive collapse systems, seismic/ lateral loading, misc material (ridge angle, eave angle etc) Design: Ensure that my designs are accurate, efficient, cost effective. Utilizing CAD, ensure that all truss to truss, truss to bearing, misc materials, truss placement, cross sections, any special connection details are accurate and clearly drawn to scale for approval/ field use. Ensure all details are clearly marked on the shop drawings as my production packs are presented to the shop for fabrication. Documentation: Build a library of reference material, blanket seals, truss to truss connections etc. Log any and all RFI's required for any project I'm working on. If this is the job you need done, Candidate is asking upper $40's to $50's Relocation: CO, USA - Western ID: C11592

Senior Designer/ Design Manager/Estimator/Inside & Outside Sales - Truss

JobLine Certified Senior Designer. Candidate has 17 years industry experience and 17 years experience in this position. Products include floor trusses, roof trusses, and I-Joists. Markets include tract, single family, custom, high end, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, scheduling, repairs, customer service, inside sales, field measurements, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes Alpine, MiTek, and AutoCAD. Education: High School Graduate and Bachelors degree in Math (Strong Trig/ Math skills) Compensation desired: Salary $40k+ Relocation: FL, GA, KY, USA - South, TN, NC, SC, WV ID: C10145

Designer/Design Manager Truss/Panel/EWP/I-Joist

Design Manager: Supervised 6 designer. Utilized MiTek Sapphire, 20/20, MBA, EFrame and OptiFrame as well as GP I-Joist programs. Design commercial, tract and custom projects for quotation and sales. Produced shop drawings for production. Utilized MiTek Sapphire Structure, MiTek 20/20, MiTek MBA and joist/beam calc programs. Worked closely with sales force and customers to produce best design possible. Compensation: $50's Relocation: USA - ALL States ID: C11005

JL Senior Designer(5) Design Manager Truss/Single & Multi Family

17 years design experience. 14 in Multi Family. Estimate, design, and engineer roof and floor truss systems for Multifamily, Commercial and Agricultural truss systems. Prepare shop drawings for production. Provide customer support, troubleshooting, and design solutions. Current software experience: MiTek, TJ Beam, Simpson, Word, Excel.WTCA certified. Compensation: 50k Thom's Notes: Candidate scored in our Senior Designer range! Top 5% nationwide. Perfect skills curve. No deficiencies. Relocation: KS, TX, OK, CO, USA - Southwest, IA, LA, MO, NE, NM, ND, SD, AZ, USA - South, UT, USA Western, WY ID: C11016

Senior Designer/Outside Sales,Estimator - Truss/I-Joist/ EWP

20+ years experience as a Designer/Senior Designer. Primary duties: design, layout, optimization, and takeoff. Secondary duties: customer service and field measurements. Software used: MiTek, OptiFrame, Alpine, AutoCAD, Soft Plan, Robbins. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware. Market experience includes single family custom, multi-family, and light commercial. My volume was varied depending on projects. Also involved in Outside Sales. Compensation: $48k+ JobLine Notes: JobLine Certified Senior Designer - Advanced Level Relocation: IL, IN, OK, TN, TX ID: C10536

@JobLine

Read/Subscribe online at www.componentadvertiser.com

Senior Designer/Design Manager/Outside Sales - I-Joist/ EWP/Glue Lam/Open Web

10 years EWP experience. Over saw all of the designs of EWP sold in the Dallas/ Fort Worth, Houston, San Antonio, Austin and South Texas region. Oversaw a team of 5 designers. Trade show experiences, Supported outside sales to close the deals. Software: AutoCAD, BC Framer, TJ Beam, TrusPlus, Excel, I-Joist software. In addition to "10 years experience w i t h Tr u s J o i s t s , B o i s e , L o u i s i a n a Pacific,Roseburg, TrusWal, GatorJoist and SpaceJoist, I have extensive knowledge of glulams. I have also trained others and checked other designer's work as a Design Manager roles." I also have outside sale experience, along with product knowledge to Builders and Code officials. Compensation: $45-50k Relocation: KS, OK, TX ID: C11594

Designer/Design Manager Truss (wood & steel)

10 years experience. Assist design manager in everyday accountability for architectural and truss design department for a home builder / truss company. Train and assist beginning and junior designers with questions and design issues. Responsible for producing accurate construction and truss design drawings. Design and estimate wood roof and floor truss systems for multi-family, commercial, residential, and custom homes. Work closely with architectural firms, engineering firms and general contractors to resolve issues and concerns of client or company. Job site inspection for code compliance. Service customer accounts on a daily basis. Products: Roof & floor trusses, wood & LGS, lumber and hardware. Software: MiTek, Alpine, AutoCAD, Excel, Word Compensation: $50k+Relocation: TX, AR, FL, NC, OK, TN ID: C10723

Senior Designer/Design Manager - Truss/Panel/I-Joist/ EWP

20 years experience designing roof & floor trusses, wall panels, I-Joists, and EWP. Supervised 5 designers, customer service, optimizing, and quotes. MiTek, OptiFrame, Robbins, TJ Beam, Truswal and Microsoft Office. Compensation: $60k+- opportunity JobLine certified Senior Designer, 5/5 overall ranking. Relocation: USA - ALL States, AB, Canada - Western/Central, Canada Eastern ID: C11256

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

January 13th, 2012 #05126 Page #31

Available candidates Design/Sales/Management - Truss/Panel/I-Joist/EWP/ Installed Sales

Single/Multi-Family Engineered Component Sales. Responsible for a sales region which covers the Southeastern areas of North Carolina and the Myrtle Beach area of South Carolina. I service singlefamily, multi-family, and commercial contractors. I also work with local building supply companies in order to provide them a link to component sales. I am responsible for making contact and then building and maintaining relationships with these contractors and building supply companies. I am responsible for the estimating and preliminary design of all projects I come in contact with, utilizing the design software. While developing relationships with the surrounding building supply companies and G.C.'s, I am able to provide engineered components, Wall panels and I-Joists/LVL's; all of which I have at least 10 years of design experience. With experience in almost all aspects of the Engineered Component industry, I've found that I truly excel within the Sales and/or Sales Management areas. Relocation: AL, FL, GA, LA, SC, TN ID: C11728

Senior Designer/Design Manager - Truss/Panel

JobLine Certified Senior Designer (Top 2%). Candidate has 12 years industry experience and 12 years experience in this position. Products include floor trusses, roof trusses, wall panels, and hardware. Markets include tract, single family, custom, high end, and light commercial. Primary duties include design, layout, optimization, and cutting/production documents. Secondary duties include checking others work, customer service, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, OptiFrame, GenericCAD, and TJ Expert. Training received includes WTCA Level 1, 2, 3, MiTek 20/20 & Engineering Principles.. Compensation desired: $70 to $75 Relocation: WI, IL, MN ID: C10019

Design Manager/Sr. Designer/ PE - Truss/Panel/EWP

30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open?? Thom's Notes: PE with Mid Atlantic seals Relocation: USA - South ID: C10897

PHONE: 800-289-5627

Senior Estimator/Estimating Manager - Truss/Whole House/ Framing Package

6 years estimating experience. 4 with MiTek 20/20 and 2 with eFrame. Markets include Single Family Custom, Tract, Light Commercial and Multi Family. Products include component framing packages and total project estimating. Prepares hard construction estimates by means of manual and computerized takeoff methods. Extensive MiTek/Excel experience. Supervises monthly inventory audits for all truss department materials. Maintains records for all received and processed quotes. Pre-engineers all plans for difficulty and profitability. Participates in cost studies to enure a correct labor and pricing strategy. Compensation $50k+ Relocation: AL, FL, GA, MS, TN ID: C10580 General/Location/Regional Manager - Truss/Panel/EWP Currently has P&L responsibility for floor and roof truss plant mostly building tract and single family custom. Also distributes EWP. All departments report to the candidate with oversight by a corporate sales manager for the sales staff only. Has managed two shifts with 100 +/- employees at the $13,000,000 to $16,000,000 level. Prior industry experience includes EWP Division Manager, Technical Sales Representative, and EWP Designer. Is also an experienced framer/framing foreman. Education: Associates degree. Has a working knowledge of, but is not currently proficient in AutoCAD, TJ Epert, MiTek 20/20 and eFrame. Compensation: Negotiable. Relocation: AL, CT, DE, GA, IN, KY, LA, ME, MD, MA, MI, MN, NH, NJ, NY, NC, OH, RI, SC, VT, WV, PA, TX, WI, USA - ALL States, AZ, CO, FL, IL, MT, NE, NV, VA, WA, DC ID: C10241

Senior (ACE) Designer/ Estimating/Outside Sales Truss/EWP

6 years experience: facilitated the truss sale, design, & delivery for lumber salesmen lacking truss experience. Developed own customer base by selling trusses. Design layouts of floor and roof truss systems for multifamily/commercial projects. Proficient use of MiTek Engineering, eFrame, AutoCAD, TJBeam, and Excel programs. Compensation: $60's One of our top 1% ACE's Relocation: TX ID: C11427

Designer - Truss

30+ years truss design. Stable, MiTek, Roof & Floor Trusses. Compensation: $45k+ Relocation: NC ID: C11692

General Manager - Truss/Panel/ Lumber/ Doors/Windows/ Cabinets/ EWP/I-Joists

Oversee all aspects of the manufacturing plant (made trusses, floor trusses and wall panels). HR— Shipping — Sales— Budget control — safety —- design — ordering. Did 2 start ups for this company and travel to many of their component plants to help get cost and budget under control. Also work with redesigning the flow of some of these plants. My last year traveled to a lot of the plants to set up new policy for them. Areas of experience: Inventory control, ordering of raw goods, hiring and firing. Working with Sales, Engineering, and Converting, Shipping and Receiving along with working closely with the owners. Running the plant --- the only thing I really don't get to involved with is sales --- the CEO handles the sales team. Compensation: $80's Relocation: AL, AZ, CO, FL, GA, HI, IN, KY, MS, NM, NC, OH, SC, TN, TX, VA, WV ID: C11686

Senior Designer - Truss/Panel/ EWP/I-Joist/Framing Package

Candidate has 15 years industry experience, 4-5 years experience in this position, and 10 years in subordinate positions leading to this position. Products include floor trusses, roof trusses, wall panels, I-Joists, EWP, hardware, and complete framing packages. Markets include tract, single family, single family custom, multi-family, and light commercial. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, customer service, inside sales, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, TJ Expert, AutoCAD, and I am willing to learn new software. Compensation desired: $45k+. Motivating factors: advancement, compensation, benefits, job security. Relocation: CA, CO, TN, WA ID: C10199

Designer/Design Manager Truss/I-Joist/EWP/Packages

35 years experience. Supervision of staff designers, training and coaching design team, checking work for accuracy, estimating and quote preparation, promoting sales with technical assistance, using Mitek software for advanced truss designing and Mitek MBA for creating and enhancing useful reports, using MS Word, MS Excell, MS Outlook, problem solving and field trouble shooting, communicating repair details.Compensation: $65k+ package Relocation: FL, GA ID: C11671

Read/Subscribe online at www.componentadvertiser.com

Senior Designer/Technical Outside Sales - Truss/Panel/ EWP/Installed Services

20 years Technical Sales & Design experience, 2 as Design Manager. Roof truss, floor truss, wall panels, EWP, component framing package, I-Joist and installed services experience. Current with MiTek 20/20, eFrame, TJ Expert, AutoCAD software. Single/multi family, light commercial, tract markets. Sold $5mm in truss and panels, provided estimates, designed plans, scheduling and customer service. Compensation: Low $60's+ Relocation: TN ID: C10710

Senior Designer(JL) Truss/Multifamily

10+ years industry experience as senior truss designer. Software: 10 years Mitek, 1 year Truswal, MS Office, TJI Beam, Autocad Lt, Simpson, & USP. Primary duties: estimating, layout, engineering, & job costing of roof, floor, & ewp components. Secondary duties: checking others work, field visits, field measures, customer meetings, repairs, & customer service on a daily basis with contractors, engineers, architects, & builders to resolve design issues from project conception to completion. Go to guy for complex commercial & residential applications. Associates Structural Engineering. WTCA Level III. Thom's Notes: JobLine Tested at Senior Designer Level 94% only used Jobber calculator. Relocation: WI ID: C11282

Production Mgr/Supervisor Floor Truss/Wall Panel

Set up of work to production employees, batch, distribute, manage jobs to be cut and built for on time delivery.Perform weekly payroll, hire of new employees. set up and purchase lumber and other necessary stock for production. oversee maintenance of all equipment including the repair. Compensation: $50's Relocation: IL, IN, IA, WI ID: C10942

New Candidates and more on www.thejobline.com W E A L S O H AV E WORK FROM HOME CONTRACT DESIGNERS available NOW! FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #32

Don’t Forget! You Saw it in the

Adverti$er

Used Equipment Wanted!

888.288.9874

Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329

Take Back Your Business Become More Competitive with:

  

Powerful Software High Quality Connector Plates Independent Established Supplier

All at a Great Price

For a software demonstration call 1-800-652-6050 www.keymark.com

www.wasserman-associates.com

Your Ad Could Be Here or on other pages in our publication

Free Advertising!

Trial period during the first quarter of 2012

Let us Earn Your Business! Contact Thomas McAnally at tmcanally@componentadvertiser.com or 800-289-5627 for details

Unmatched Quality • Engineered Design • Structurally Superior

Call 573.437.4848 for your FREE SAMPLE, or visit www.trimfitllc.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #33

Don’t Forget! You Saw it in the

Safety First! Safety Meeting Topics

Adverti$er Técnicas para levantar objetos pesados

Las lesiones de la espalda constituyen una de cada cinco lesiones relacionadas con el trabajo en California. Las lesiones a la espalda que resultan en incapacidad no son chiste para los trabajadores que pierden horas de trabajo o de actividades personales. La triste verdad es que la mayoría del dolor y el tiempo perdido pueden evitarse si se sabe cómo Back injuries account for about one in every five job-related injuries funciona la espalda y cómo levantar de forma segura los objetos pesados in California workplaces. Disabling back injuries are no laughing matter para protegerse la espalda. for workers who lose time from work or from personal activities. The La espalda es una red frágil de ligamentos, discos y músculos que sad truth is that most of the pain and lost time can been prevented if you pueden lastimarse con facilidad. El diseño complejo de la espalda deja de are aware of how the back functions and how to lift safely to protect funcionar correctamente cuando se le fuerza a ejecutar actividades para your back. las cuales no ha sido diseñada. Levantar objetos pesados con la espalda

From State Fund CA.

Safe Lifting Techniques

The back is a network of fragile ligaments, discs, and muscles which can easily be thrown out of order. The back’s complex design breaks down when it’s forced to perform activities it was not designed to do. Lifting with the back twisted or bent just begs for a pulled muscle or ruptured disc. One sure way to risk injuring the back is to lift heavy or bulky loads improperly or unassisted. Never be afraid to ask for help with loads that you know you cannot lift safely. Lift with good sense and a little extra help from a co-worker or mechanical aid when necessary. If you decide you are capable of lifting a light load, make sure you lift correctly. •

Move in so that your feet are close to the base of the object to be lifted.

•

Face the object squarely. Bend your knees and squat over the item to be lifted. In this position, the back gets added lifting strength and power from the legs and arms.

•

Move up close to the item, because the backbone must act as a supporting column, and it takes the least strain close in. Tilt the item on edge with its long axis straight up so that the center of the weight is as high as possible above the ground. Still squatting, the feet should be set with legs pointed right at the load, with the back straightened, the worker may then grasp the load with both arms and slowly stand up with it, pushing up with the leg muscles. If you can’t lift slowly, you can’t lift safely.

A good way to learn the right from the wrong way to lift is to practice lifting correctly a few times. You will notice that the correct way to lift is the easiest way to lift the load, with the least strain and awkwardness. To lift the wrong way will, over time, cause injury and pain. The back can be damaged quickly but can take a long time to heal.

doblada es una forma fácil de estirarse un músculo o romperse un disco de la columna vertebral. Una manera sin falla de lastimarse la espalda es levantar un objeto pesado o voluminoso incorrectamente o sin ayuda. Nunca tenga temor de pedir ayuda para levantar objetos que usted sabe que no es capaz de levantar en forma segura por sí solo. Levante los objetos pesados aplicando el buen juicio y con la ayuda de un compañero de trabajo o ayuda mecánica cuando sea necesario. Si usted decide que es capaz de levantar una carga ligera, asegúrese de levantarla de la forma correcta. • Colóquese de manera que tenga los pies cercanos a la base del objeto a levantar. • Sitúese directamente de cara al objeto. Doble las rodillas y haga cuclillas sobre el objeto a levantar. En esta posición, la espalda recibe la potencia de izar adicional que le brindan las piernas y los brazos. • Colóquese cerca del objeto, porque la columna vertebral debe funcionar como una columna de apoyo, y estando cerca del objeto recibe menos esfuerzo. • Gire el objeto hasta tener el eje longitudinal vertical para que el centro de gravedad esté lo más alto posible sobre el suelo. • Aún de cuclillas, los pies y las piernas deben estar apuntando a la carga, con la espalda recta, el trabajador debe sujetar la carga con ambos brazos y pararse lentamente, haciendo la fuerza con los músculos de las piernas. Si no se levanta lentamente, no se está levantando de manera segura. Una buena manera de diferenciar entre el método correcto y los incorrectos de levantar es practicar la forma correcta varias veces. Observará que con el método correcto es más fácil levantar la carga, con el menor esfuerzo y menos torpeza. Con el tiempo, el levantar objetos pesados incorrectamente puede ocasionar lesiones y dolor. La espalda se puede lastimar en un instante y tomar mucho tiempo para sanar.

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 13th, 2012 #05126 Page #34

Don’t Forget! You Saw it in the

Adverti$er

Business Listings

JobLine.com, inc.

The

800-289-JOBS

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com If you are a supplier of building compopnent industry materials, equipment, or supplie, send us your business card and we will poste it free during the first quarter of 2012 send to Info@ComponentAdvertiser.com

J. Chip Dean PRESIDENT

Time To Hire? We’re here when you need help!

www.thejobline.com

Bruce Mann

Wood Roof & Floor Trusses Wall Panels Engineered Components Gould Design, Inc. Christopher A. Gould -

Designing to your needs... One project at a time. President

440 Spring Street, Marshfield, MA. 02050 phone: (314) 374-7400 email: CDean@ComponentRunner.com www.ComponentRunner.com

Manager

13540 East Boundary Road Building I, Suite 102 Midlothian, VA 23112-3943 brucemann.kbbp@gmail.com

CAD Design

Office: 804-744-7253 Fax: 804-744-7420 Cell: 804-304-7253 www.kb-bp.com

Designing to your needs... One project at a time

Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards Industry Leading Professionals at your fingertips

Is your Safety Program Working?

Overall design department cost reduced, saving you $$$ Experienced with multiple industry design software suites Up to date with US & Canadian Building Codes

(772) 475-3583 - Call Today

cgould@goulddesigninc.com | www.goulddesigninc.com

40+ consultations have demonstrated that companies can improve their bottom line through lean and TOC principles. Time standards (R.E., S.U. Man-Minutes) for truss labor estimation are provided. See what past clients are saying on web site. Payback less than 3 months. The easiest and most inexpensive truss labor tracking program available! No Pre-Scheduling of orders or employees Any order or shop employee can be logged into any workstation at any given time for maximum flexibility! ½ the normal pricing of plate providers’ truss labor tracking software cost. No Setup & Installation Fees. Use Existing Shop Computers. Free, No Obligation 3-Month Trial Period www.todd-drummond.com Phone: 603-763-8857

PHONE: 800-289-5627

Leverage Our Extensive Experience to Gain:

Continual reduction in incident frequency & severity Sustained productivity, quality and customer relations Avoidance of regulatory costs, liability and risk Increased employee retention Strengthened business reputation

BIG PICTURE SAFETY, L.L.C. eXPeRIenCe ~ ReSULTS ~ SAVInGS

888.519.4130 CALL NOW! info@bigpicturesafety.com www.bigpicturesafety.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

PHONE: 800-289-5627

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

Adverti$er

Read/Subscribe online at www.componentadvertiser.com

January 13th, 2012 #05126 Page #35

FAX: 800-524-4982