VIVID
Peridot
Base Fondo T Vivid
Emerald
Base Fondo T Vivid
Malachite
Base Fondo T Vivid
Description
Aurora® is a crystal-inspired product composed of genuine, precision-cut SWAROVSKI® crystals, designed to give architects and interior designers access to an indispensable material for today’s most renowned international projects, ensuring their creations push the boundaries of imagination.
Aurora comes with 22,500 SWAROVSKI ELEMENTS per gallon.
Technical Name
Crystal Elements
Key Features
• Creates a flawless facet that refracts light
• Sparkles endlessly
• Durable, tough film development
• Specially coated crystals for excellent water repellency and scrub resistance
• Odorless
• Non-flammable
• Thermal insulating properties
• Helps improve acoustic insulation
Pack Size
• 1 US Quart – 1 kg
• 1 US Gallon – 2.5 kg
Recommended for
Interior & exterior applications on plaster, embossed wall coverings, gypsum board, concrete, cement rendering, brickwork & block work.
Type of Substrate
Plaster, embossed wall coverings, gypsum board, concrete, cement rendering, brickwork and block work.
Finish
Textured light refractive glimmer finish.
Coverage
Approximately 1 m2/kg/coat.
Drying Time
Touch-dry in 1 hour Re-coatable after 2-4 hours if desired.
Thinner
No thinning required.
Surface Preparation
All surfaces must be cured, clean, dry, and free from dirt, dust, rust, stains, grease, oil, mildew, wax, efflorescence, bond-breakers and other contaminants.
Remove all loose, peeling, or chalky paint
by sanding, scraping, or other appropriate methods.
Repair all cracks, holes, and other surface imperfections with a suitable patching material. Repaired surfaces should then be sanded smooth, dusted clean, and primed with a suitable Colortek® primer.
New plaster or masonry surfaces must be allowed to cure (28 days) before applying the base coat. Cured plaster should be hard, have a slight sheen and a maximum pH of 10; soft, porous, or powdery plaster indicates improper cure.
Knife off any protrusions and prime the plaster before and after applying patching compound.
Application Method
• Apply Colortek® Fondo T as a base coat. Wait until the surface is partially dry (approximately 50%) before smoothing with a trowel without applying any extra material. This second step is meant to smoothen the base coat before applying Aurora.
• Once the base coat has dried, apply Aurora using an Inox trowel, spreading across the primed surface to create an evenly distributed coat.
RUSSIAN SPANISH TURKISH
ROMANIAN FRANÇAIS ARABIC HINDI
www.colortek.eu info@colortek.eu
colortekpaints
