Mitutoyo Catalogue 2026 — Precision measuring tools, calipers & micrometers for Australia & NZ

Index 4

Calibration Instruments

6

Micrometers

13

Calipers

16

Height Gauges

18

Depth Gauges

21

Indicators

32

Inside Measuring Instruments

Measurement Data Management

Sensors and Embedded Equipment

35

43

44

Measuring Equipment

1

Table of contents Calibration Instruments

4

Height Gauges

16

Reference Gauges.......................................................................................... 4

High-precision Height Gauge .....................................................................16

Digimatic Universal Protractor SERIES 187............................................................... 5

Linear Height Series 518 HP 2D Measurement System........................................... 16

Radius Gauges SERIES 186..................................................................................... 4

QM-Height SERIES 518 — High-performance Height Gauge.................................. 16

Thickness Gauges SERIES 184................................................................................. 4

Digital Gauges .............................................................................................17

Thread Pitch Gauges SERIES 188............................................................................. 5

ABSOLUTE Digimatic Height Gauge with Ergonomic Base...................................... 17

Universal Bevel Protractor SERIES 187..................................................................... 5

Digimatic Height Gauge SERIES 192 - Multi-function Type with SPC Data Output..... 17

Micrometers

6

Depth Gauges

18

Outside Micrometers (Digimatic)................................................................. 6

Depth Micrometer........................................................................................18

Coolant Proof Micrometers SERIES 293 - IP65 Digimatic Micrometer........................ 6

Depth Micrometer (Interchangeable Rod Type)....................................................... 18

High-speed and High-accuracy Digimatic Micrometer QuantuMike

Depth Micrometer SERIES 128.............................................................................. 18

SERIES 293 — IP65 Micrometer with 2 mm/rev Spindle Feed.................................. 6 Outside Micrometers SERIES 340 — with Interchangeable Anvils............................. 7

Caliper Type..................................................................................................19 ABSOLUTE Digimatic Depth Gauge SERIES 571..................................................... 19

Outside Micrometers..................................................................................... 7

Depth Gauge Attachment...................................................................................... 19

Digit Outside Micrometers SERIES 193.................................................................... 8

Optional Accessory for Calipers............................................................................. 19

Outside Micrometers - SERIES 103.......................................................................... 7

Vernier Depth Gauge SERIES 527.......................................................................... 19

Outside Micrometers SERIES 104 — with Interchangeable Anvils............................. 8 Special Purpose Micrometers....................................................................... 9

Indicator Type...............................................................................................20 ABSOLUTE Digimatic Depth Gauge SERIES 547..................................................... 20

Can Seam Micrometers SERIES 147....................................................................... 11 Disc Micrometers SERIES 323.................................................................................. 9 QUICKmini SERIES 700......................................................................................... 11 Screw Thread Micrometers SERIES 126.................................................................... 9 Sheet Metal Micrometers SERIES 118.................................................................... 10 Tube Micrometer SERIES 115................................................................................ 10 Tube Micrometer SERIES 115 - Spherical Anvil....................................................... 10 Tube Micrometer SERIES 395 - Spherical Anvil....................................................... 10 Accessories....................................................................................................12 Telescoping Gauge Set SERIES 155........................................................................ 12 Accessories, Options.....................................................................................12 Micrometer Stands SERIES 156............................................................................. 12

Calipers

13

Calipers - Digital...........................................................................................13

Indicators

21

Digimatic Indicators.....................................................................................21 ABSOLUTE Digimatic Indicator ID-CAX SERIES 543 — Peak-Value Hold Type......... 23 ABSOLUTE Digimatic Indicator ID-CGX SERIES 543 — Bore Gauge Type................ 23 ABSOLUTE Digimatic Indicator ID-CNX SERIES 543 — Standard Type.................... 21 ABSOLUTE Digimatic Indicator ID-N/B SERIES 543 — with Dust/Water Protection Conforming to IP66............................................... 21 ABSOLUTE Digimatic Indicator ID-U (Slim and Economical Design)......................... 22 Dial Indicator................................................................................................24 Back Plunger Type Dial Indicators.......................................................................... 27 SERIES 1 — Compact Type, Extra Small Diameter.................................................. 26 SERIES 1 — Compact Type, Small Diameter........................................................... 26 SERIES 2 — Long Stroke Type............................................................................... 25 SERIES 2 — Special Dial Indicators....................................................................... 27

ABSOLUTE Coolant Proof Caliper SERIES 500

SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation............................ 24

— with Dust/Water Protection Conforming to IP67 Level...................................... 13

SERIES 2 — Standard Type, 0.01 mm Graduation.................................................. 24

ABSOLUTE Digimatic Caliper SERIES 500

SERIES 2 — Standard Type, Inch Reading.............................................................. 25

— with Exclusive ABSOLUTE Encoder Technology.................................................. 13

SERIES 3 — Long Stroke Type, Large Diameter...................................................... 27

Calipers - Vernier..........................................................................................14

Dial Test Indicators.......................................................................................28

Dial Caliper SERIES 505........................................................................................ 14

ABSOLUTE Digimatic Thickness Gauges SERIES 547............................................... 30

Long Jaw Vernier Caliper SERIES 534..................................................................... 15

Dial Test Indicator SERIES 513 — Standard Type.................................................... 28

Vernier Caliper SERIES 160 — with Nib Style Jaws and Fine Adjustment................ 15

Pocket Type Dial Test Indicator SERIES 513............................................................. 29

Vernier Caliper SERIES 530 — Standard Model..................................................... 14

Thickness Gauges SERIES 547, 7........................................................................... 30

Vernier Caliper SERIES 532 — with Fine Adjustment............................................. 14

Stands............................................................................................................31 Dial Gauge Stands SERIES 7.................................................................................. 31 Magnetic Stands SERIES 7..................................................................................... 31

2

Table of contents Inside Measuring Instruments

32

Holtest...........................................................................................................32 Holtest SERIES 368 — Three-point/Two-point Bore Micrometers............................ 32 Inside Micrometers.......................................................................................32 Inside Micrometers SERIES 141 — Interchangeable-Rod Type................................ 33 Inside Micrometers SERIES 145 — Caliper Type..................................................... 33 Tubular Inside Micrometers SERIES 137 — Extension-Rod Type.............................. 32 Tubular Inside Micrometers SERIES 137 — Extension-Rod Type (main unit)............ 33

Vision Measuring Systems...........................................................................46 High-Accuracy CNC Vision Measuring System........................................................ 46 Standard CNC Vision Measuring System................................................................ 46 Ultra-High Accuracy CNC Vision Measuring System................................................ 46 Vision Measuring System Equipped with Colour Camera and Zoom........................ 46 Optical Measuring Instruments...................................................................47 High-Accuracy Profile Projector............................................................................. 47 Profile Projector.................................................................................................... 47

Bore Gauges..................................................................................................34 Bore Gauges SERIES 511...................................................................................... 34

Measurement Data Management

35

Measurement Data Input Unit....................................................................35 Digimatic Gauge/PC Data Input Device USB Input Tool Direct USB-ITN................... 35 Accessories....................................................................................................36 Data Management Software................................................................................. 37 Footswitch............................................................................................................ 37 Input Tool............................................................................................................. 36 SPC Data Cables................................................................................................... 36 USB Direct Cables................................................................................................. 36 U Wave Wireless Data Management Cables........................................................... 38 Transmitters..................................................................................................38 U Wave Transmitters.............................................................................................. 38 Measurement Data Wireless Communication System..............................39 Measurement Data Wireless Communication System U-WAVE-TM/TC (U-WAVE fit)...... 39 Measurement Navigation Applications.................................................................. 40 Data Logger/Multiplexer.............................................................................41 Mini-Printer Equipped with Data Logging Function ............................................... 41 SERIES 264 — Digimatic Mini-Processor DP-1VA LOGGER.................................... 41

Reference

42

Recording Measurement Results................................................................42 Software dedicated to inspection and quality control............................42

Sensors and Embedded Equipment

43

Linear Scales AT715 Series 539............................................................................. 43

Measuring Equipment

44

Coordinate Measuring Machines................................................................44 5-Axis CNC CMM................................................................................................. 44 Compact In-Line CNC CMM.................................................................................. 45 High-Accuracy CNC CMM..................................................................................... 44 In-Line, Horizontal CNC CMM............................................................................... 45 In-Line Type CNC CMM......................................................................................... 45 Shop-Floor Type CNC CMM................................................................................... 45 Standard CNC CMM (Bridge Type)......................................................................... 44

3

Calibration Instruments Reference Gauges Thickness Gauges SERIES 184 The Mitutoyo thickness and feeler gauges are constructed of high-quality carbon steel to reduce wear and increase longevity while providing highly accurate feel and gap thickness measurements. The three-sided design and thumb slot on the outer protective case make the gauges easy to use and are secure while measuring.

184-304S

• Metric thickness gauges are available with tapered leaves.

• Each leaf is marked with its thickness.

• Each leaf is detachable if necessary.

Metric Code No.

Range

Composition of leaves

184-303S 184-304S 184-305S

0.05-1.0mm 0.05-1.0mm 0.05-1.0mm

28 leaves: 0.05 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm 20 leaves: 0.05 - 1mm by 0.05mm 13 leaves: 0.05 - 0.3mm by 0.05mm, 0.4 - 1mm by 0.1mm

Radius Gauges SERIES 186 The Mitutoyo metric radius gauges have convex and concave gauges to perform highly accurate outside and inside radius measurements. The measuring surfaces are precisely finished with smooth, accurate edges for exact measurements.

186-103

• Radius size is stamped on each gauge leaf.

• Each leaf comprises an internal and an external radius gauge of the same size.

• Includes locking clamp.

186-106 Metric

Imperial

Code No.

Range

Code No.

Range

186-110 186-902 186-105 186-106 186-107

0.4-6mm 0.5mm-13mm 1-7mm 7.5-15mm 15.5-25mm

186-103 186-101 186-104

1/32"-17/64" 1/32"-1/4" 9/32"-33/64"

4

Calibration Instruments Reference Gauges Thread Pitch Gauges SERIES 188 The Mitutoyo screw thread pitch gauges are constructed of high-grade stainless steel for reliable and highly accurate thread pitch measurements.

• Thread pitch is stamped on each gauge.

• Metric, Unified, and Whitworth screw pitch gauges.

188-102 Code No.

Code No.

Range

Range

Metric Screw Pitch Gauges 188-122 0.4-7mm 60 Deg Unified Screw Pitch Gauges 188-111 4-42 TPI 60 Deg

Metric and Unified Screw Pitch Gauge Set 188-151 0.4-7mm/4 - TPI 60 Deg Whitworth Screw Pitch Gauges 188-101 4-42 TPI 55 Deg 188-102 4-60 TPI 55 Deg

Digimatic Universal Protractor SERIES 187

The Mitutoyo Digimatic Universal Protractor uses an electronic gravity sensor to generate and process highly accurate inclination values on an easy-to-read LCD screen in degrees and minutes. The protractor has a 360-degree measuring range in clockwise and counterclockwise directions to quickly measure angles for repeatable angle cuts or workpiece positioning.

• Data output function makes it easy to gather statistical data.

• Can be attached to height gauges using a gauge holder (950750, metric) • Setting preset value.

• Removable blade.

187-501 Code No.

Range

187-501 187-502

150mm 300mm

Universal Bevel Protractor SERIES 187 The Mitutoyo Universal Bevel Protractor features a blade with an easy-to-use locking clamp which shows precise angle measurements on a dial gauge in 1° graduations.

A Vernier scale enables fine measurements for better accuracy with a resolution to each 5 minutes. The protractor measures in clockwise and counterclockwise directions to quickly measure angles for repeatable angle cuts or workpiece positioning.

• High-precision instrument for • The scale magnifier can accurate angle measurement reduce parallax differences. on machines, molds, and jigs. • The fine adjustment • There is no height difference knob allows for fine feed between the main scale and adjustment.

Vernier.

• Graduation: 5’

187-901-10

Code No.

Blade Length

Remakes

187-901-10

150mm

w/60°, 45°, 30° edges

5

Micrometers Outside Micrometers (Digimatic) High-speed and High-accuracy Digimatic Micrometer QuantuMike SERIES 293 — IP65 Micrometer with 2 mm/rev Spindle Feed

293-140-40

The MDE Quantumike Micrometer offers rapid and precise measurements with its unique wider thread pitch, moving the spindle 2.0 mm per rotation — up to 4x faster than standard micrometers. It features exceptional accuracy with a ±1 μm permissible error, an IP65 protection rating, and a user-friendly design with enhanced display and customizable settings, making it ideal for demanding, high-precision applications.

Metric Code No.

Range

Resolution

293-140-40

0 - 25mm

0.001mm

Code No.

Range

Resolution

293-180-40 293-181-40 293-182-30 293-183-40

0-1" 1-2" 2-3" 3-4"

0.00005" / 0.001mm 0.00005" / 0.001mm 0.00005" / 0.001mm 0.00005" / 0.001mm

Imperial

• Rapid Measurement with High-Speed Movement • Boasts a maximum permissible error of just ±1 μm • Water-resistant and dust-resistant, capable of withstanding challenging environments where exposure to coolant and debris is common.

• The ratchet thimble mechanism ensures stable, one-handed operation, providing tactile feedback through ratcheting sounds to confirm secure measurements. The speeder ratchet aids in rapid spindle feed, improving efficiency.

• Bidirectional serial communication supported.

Coolant Proof Micrometers SERIES 293 - IP65 Digimatic Micrometer The Mitutoyo Digimatic coolant-proof digital SPC output capable micrometer produces highly accurate, repeatable measurements even when exposed to liquids and dirt.

293-240-30

Metric Code No.

Range

Resolution

With SPC data output 293-230-30 0-25mm 293-231-30 25-50mm Without SPC data output 293-240-30 0-25mm 293-241-30 25-50mm 293-242-30 50-75mm 293-243-30 75-100mm

0.001mm 0.001mm 0.001mm 0.001mm 0.001mm 0.001mm

Metric / Imperial Code No.

Range

Resolution

With SPC data output 293-330-30 0-1"/0-25mm 293-331-30 1-2"/25-50mm 293-332-30 2-3"/50-75mm Without SPC data output 293-340-30 0-1"/0-25mm 293-341-30 1-2"/25-50mm 293-342-30 2-3"/50-75mm 293-343-30 3-4 "/75-100mm

0.00005"/0.001mm 0.00005"/0.001mm 0.00005"/0.001mm 0.00005"/0.001mm 0.00005"/0.001mm 0.00005"/0.001mm 0.00005"/0.001mm

6

• The Mitutoyo IP65 rated coolant-proof micrometer’s ratchet stop thimble mechanism provides a constant measuring force on the spindle to ensure accurate, repeatable measurements.

• The combination of the ratchet thimble and speeder enables a rapid spindle feed when measuring widely different dimensions, as well as, easier one-handed measurements.

• Accurate and highly environmentally resistant, assisting with many types of measurements.

• Ratchet thimble provides better operability for one-handed operation.

• Oil-resistant material used for all plastic parts.

• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system.

Micrometers Outside Micrometers (Digimatic) Outside Micrometers SERIES 340 — with Interchangeable Anvils

340-351-30

Metric / Imperial Code No.

Range

Resolution

With SPC data output 340-351-30 0-6" 340-352-30 6-12"

0.001mm/0.00005" 0.001mm/0.0001"

340-520

• Wide measuring range with interchangeable anvils.

• Measuring face of the spindle is carbide tipped (standard model).

• IP65 water / dust protection.

• Equipped with Ratchet Stop for constant measuring force.

Outside Micrometers Outside Micrometers - SERIES 103 • This is a simple, classic analog micrometer that represents the roots of our company’s foundation.

• Measuring faces: Carbide tipped • Equipped with Ratchet Stop for constant measuring force.

103-137

103-139-10

Metric Code No. With ratchet stop 103-137 103-138 103-139-10 103-140-10 103-141-10 103-142-10 103-143-10 103-144-10 103-145-10 103-146-10 103-147-10 103-148-10

Imperial Range

Graduation

0-25mm 25-50mm 50-75mm 75-100mm 100-125mm 125-150mm 150-175mm 175-200mm 200-225mm 225-250mm 250-275mm 275-300mm

0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm

Code No. With ratchet stop 103-177 103-178 103-179 103-180 103-181 103-182

Range

Graduation

0-1" 1-2" 2-3" 3-4" 4-5" 5-6"

0.001" 0.001" 0.001" 0.001" 0.001" 0.001"

Set 103-904-10

0 - 6" (6 pcs. / set)

Sets 103-913-50 103-914-50 103-915-10

0 - 150mm (6 pcs./set) 0 - 300mm (12 pcs./set) 150 - 300mm (6 pcs./set)

103-913-50

103-904-10

7

Micrometers Outside Micrometers Digit Outside Micrometers SERIES 193

193-112

• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.

• Counter resolution 0.01 mm • Measuring faces: Carbide tipped • Equipped with Ratchet Stop for constant measuring force.

Metric Code No.

Range

Graduation

193-111

0 - 25mm

0.001mm (reading is obtained with vernier)

193-112

25 - 50mm

0.001mm (reading is obtained with vernier)

193-101 193-102

0 - 25mm 25 - 50mm

0.01mm 0.01mm

With ratchet stop

Outside Micrometers Outside Micrometers SERIES 104 — with Interchangeable Anvils The Mitutoyo ratchet stop outside micrometer in metric scale is ideal for measuring metal and non-metal workpieces by controlling the amount of force applied by the spindle. A ratchetstop mechanism provides uniform pressure on a workpiece for precise, repeatable measurements. Interchangeable anvils allow for measuring a wide range of workpiece sizes.

• Wide measuring range with interchangeable anvils.

• Measuring face of the spindle is carbide tipped (standard model).

• Equipped with Ratchet Stop for constant measuring force.

104-136

Metric

Imperial

Code No.

Range

Graduation

Code No.

Range

Graduation

104-139A 104-135A 104-140A 104-136A 104-141A 104-142A 104-143A 104-144A

0 - 100mm 0 - 150mm 100 - 200mm 150 - 300mm 200 - 300mm 300 - 400mm 400 - 500mm 500 - 600mm

0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm

104-149 104-137 104-138

0 - 4" 0 - 6" 6 - 12"

0.001" 0.001" 0.001"

8

Micrometers Special Purpose Micrometers Screw Thread Micrometers SERIES 126

126-126

The Mitutoyo screw thread micrometer uses optional V-Anvil and conical spindle inserts interchangeably to precisely measure pitch diameters of metric or unified screw threads. A ratchet-stop mechanism provides uniform pressure on a workpiece for precise, repeatable measurements.

Metric Code No.

Range

Graduation

126-125 126-126

0-25mm 25-50mm

0.01mm 0.01mm

126-800

Set with one each of 126-801 to 126-806

0.01mm

• Wide measuring range with interchangeable anvils.

• Measuring face of the spindle is carbide tipped (standard model).

• Equipped with Ratchet Stop for constant measuring force.

Disc Micrometers SERIES 323

323-350-30

Metric / Imperial Code No.

Range

With SPC data output 323-350-30 0 - 1" 323-351-30 1 - 2"

Resolution 0.00005"/0.001mm 0.00005"/0.001mm

The Mitutoyo Digimatic coolant-proof digital SPC output capable micrometer produces highly accurate, repeatable measurements even when exposed to liquids and dirt.

The flatness and thinness of the discs allow for measurements in tight spaces with reliability. Measurements are displayed on an easy-to-read LCD readout.

• Measures “root tangent length” of spur gears and helical gears.

• Determination of the root tangent length: refer to “Quick Guide to Precision Measuring Instruments” • Equipped with Ratchet Stop for constant measuring force.

• 20mm diameter discs.

9

Micrometers Special Purpose Micrometers Sheet Metal Micrometers SERIES 118 The Mitutoyo sheet metal micrometers are designed with a deep measuring throat to enable multiple measurements across a linear plane on materials such as sheet metal, paper, plastic and rubber.

• The U-shaped micrometer is ideal for measuring the thickness of sheet metal at a considerable distance from the edge.

• Measuring faces: Carbide tipped • Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.

• Equipped with Ratchet Stop for constant measuring force.

118-102 Metric Code No.

Range

Throat Depth

Anvil/Spindle Type Graduation

118-101 118-118 118-103

0-25mm 0-25mm 0-25mm

100mm 150mm 300mm

F-F S-S F-F

0.01mm 0.01mm 0.01mm

Tube Micrometer SERIES 115 The Mitutoyo spherical face micrometer measures the thickness of tube walls within +/- 0.00015” of accuracy.

• The spherical anvil-type micrometer is convenient for measuring cylindrical workpieces. The spherical anvil comes into contact with a workpiece at a point instead of a surface area, thus increasing measurement accuracy.

• Equipped with Ratchet Stop for constant measuring force.

115-115

Metric Code No.

Range

Anvil/Spindle Type

Graduation

115-115

0-25mm

Spherical Anvil/ Flat Spindle

0.01mm

Tube Micrometer SERIES 115 - Spherical Anvil

Tube Micrometer SERIES 395 - Spherical Anvil

Designed to measure workpieces with concave-concave surfaces.

The spherical anvil and spindle respectively come into contact with the workpiece at a point, thus increasing measurement accuracy.

• IP65 water / dust protection).

• Equipped with Ratchet Stop for constant measuring force.

• These micrometers also include inch/metric conversion, origin-set, zero/ABS and data hold.

115-215 Metric / Imperial Code No. Metric 115-215 Imperial 115-253

Metric / Imperial

Range

Anvil/Spindle Type

Graduation

0-25mm

Spherical Anvil/Spherical Spindle

0.01mm

0-1"

Spherical Anvil/Spherical Spindle

0.01mm

Code No.

Range

395-371-30 0-1"

10

Anvil/Spindle Type

Resolution

Spherical Anvil/Spherical Spindle

0.00005"/0.001mm

Micrometers Special Purpose Micrometers Can Seam Micrometers SERIES 147 The Mitutoyo can seam micrometer takes precise measurements of width, height and depth of can seams. Micrometers are available for steel, aluminum and sprayer cans.

• The Mitutoyo can seam micrometer is constructed with highgrade tool steel. The micrometer’s ratchet-stop mechanism provides uniform pressure on a workpiece for precise, repeatable measurements. An inch Vernier scale provides precise outside diameter measurements.

• Measures the width, height, and depth of can seams.

147-103 Metric Code No.

Range

Graduation

147-103* 147-105

0-13mm (for steel cans) 0-13mm (for aluminium cans)

0.01mm 0.01mm

* For depth measurements up to 5 mm.

QUICKmini SERIES 700 A compact comparator designed for carrying convenience, it is very suited for quick inspection of paper thickness, leather, wires, plastic parts, etc. The digital display provides error-free reading.

• Lightweight and palm-sized.

• Highly suitable for quick dimensional inspection of small, thin and delicate objects.

700-118-30

Metric / Imperial Code No.

Range

Resolution

700-118-30

0-0.500"/12.7mm

0.00005"/0.001mm

11

Micrometers Accessories Telescoping Gauge Set SERIES 155 • The tools are for comparing and measuring the diameters of extremely small holes or the widths of narrow grooves that are hard to measure with the other measuring instruments.

• A spring-loaded plunger expands within a bore (or groove) and is locked in place allowing diameter measurements (or width) with an outside micrometer after extraction.

Metric Code No. 6-Gauge Set 155-905 Gauges included 155-127 155-128 155-129 155-130 155-131 155-132

155-905

Range 8-150mm Set 8-12.7mm 12.7-19mm 19-32mm 32-54mm 54-90mm 90-150mm

Accessories, Options Micrometer Stands SERIES 156 The Mitutoyo micrometer stands are highly versatile, available in fixed angle, adjustable angle, vertical and fixed angle with a platform types. Clamp and adjusting knobs are easy to grip to make locking and unlocking of clamps simple and smooth.

• Dedicated stand for micrometers.

• Designed to allow benchtop use of hand-held micrometers or other gauges which have frames suitable for gripping by the clamp. Reduces the influence of temperature changes due to body heat, enabling higher-accuracy measurement.

Metric / Imperial Code No.

Range

156-101-10

15 - 100mm (0.6- 4")*

12

Calipers Calipers - Digital ABSOLUTE Coolant Proof Caliper SERIES 500 — with Dust/Water Protection Conforming to IP67 Level • Rated to IP67: can be used in workshop conditions exposed to coolant, water, dust or oil. The digital display can reduce human error by preventing incorrect reading of measurement results.

• Incorporates Mitutoyo’s ABSOLUTE measurement system.

No need to reset the origin after switching on. Eliminates overspeed errors.

• Battery cap does not require a screw driver for battery replacement.

• SPC data output models can be integrated into statistical process control and measurement systems.

(Refer to page 42.)

• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones.

500-752-20

Optional Accessories

Metric / Imperial Code No.

Range

Resolution

500-752-20 500-753-20 500-762-20 500-763-20 500-764-20 500-754-20

0 - 6"/0 - 150mm 0 - 8"/0 - 200mm 0 - 6"/0 - 150mm 0 - 8"/0 - 200mm 0 - 12"/0 - 300mm 0 - 12"/0 - 300mm

0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm

Measurement data output port

Yes Yes Yes

Code No.

Type

264-620 264-621 264-624

IP67 Buzzer IP67

Description U-WAVE-TC*2 U-WAVE-TC*2 U-WAVE-TCB*2

ABSOLUTE Digimatic Caliper SERIES 500 — with Exclusive ABSOLUTE Encoder Technology • This is a standard digital caliper. The digital display can reduce human error by preventing incorrect reading of measurement results.

• Incorporates Mitutoyo’s ABSOLUTE measurement system.

No need to reset the origin after switching on.

Eliminates overspeed errors.

• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

• SPC data output models can be integrated into statistical process control and measurement systems.

500-152-30

Metric Code No. Metric 500-151-30 500-152-30 Metric - Long 500-500-10 500-505-10 500-506-10

Long - 500-500-10

Metric / Imperial Range

Resolution

Measurement data output port

0 - 150mm 0 - 200mm

0.01mm 0.01mm

Yes Yes

0 - 450mm 0 - 18"/0 - 450mm 0 - 24"/0 - 600mm

0.01mm 0.01mm 0.01mm

Code No. Imperial 500-170-30 500-171-30 500-196-30 500-172-30 500-197-30 500-173-30 500-193-30

Range

Resolution

Measurement data output port

0 - 4"/0 - 100mm 0 - 6"/0 - 150mm 0 - 6"/0 - 150mm 0 - 8"/0 - 200mm 0 - 8"/0 - 200mm 0 - 12"/0 - 300mm 0 - 12"/0 - 300mm

0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm 0.0005"/0.01mm

Yes Yes

13

Yes Yes

Calipers Calipers - Vernier Vernier Caliper SERIES 530 — Standard Model

Dial Caliper SERIES 505

• This is a standard analog caliper. It can measure the outside, inside, depth, and step.

• The small Vernier face angle (14°) provides easy reading.

• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

• Easy-to-read yellow dial reduces parallax error.

• The font used on the dial face and the main scale is easy to read.

• Large finger rest aids ease of use.

505-730 530-118

505-731

Metric / Imperial Code No. Metric 530-100 Metric / Imperial 530-104 530-312 530-114 530-118 530-115 530-119

Range

Graduation

0 - 100mm

0.05mm

0 - 150mm/0 - 6" 0 - 150mm/0 - 6" 0 - 200mm/0 - 8" 0 - 200mm/0 - 8" 0 - 300mm/0 - 12" 0 - 300mm/0 - 12"

0.05 mm (1/128") 0.02 mm (0.001") 0.05 mm (1/128") 0.02 mm (0.001") 0.05 mm (1/128") 0.02 mm (0.001")

Vernier Caliper SERIES 532 — with Fine Adjustment

505-745

Metric Code No.

Range

Graduation

505-730 505-731 505-745 505-732 505-733

0 - 150mm 0 - 200mm 0 - 300mm 0 - 150mm 0 - 200mm

0.02mm 0.02mm 0.02mm 0.01mm 0.01mm

Code No.

Range

Graduation

505-740J 505-741J 505-749

0 - 6" 0 - 8" 0 - 12"

0.001" 0.001" 0.001"

Fine-adjustment thumbwheel aids slider positioning.

Imperial

532-119

Metric / Imperial Code No.

Range

Graduation

532-119 532-120 532-121

0 - 130mm/0 - 5" 0 - 180mm/0 - 7" 0 - 280mm/0 - 11"

0.02 mm(0.001") 0.02 mm(0.001") 0.02 mm(0.001")

14

Calipers Calipers - Vernier Vernier Caliper SERIES 160 — with Nib Style Jaws and Fine Adjustment • The jaws’ measuring faces have a radius for accurate inside diameter (ID) measurement.

• Inside and outside measurements can be read directly from the upper and lower slider graduations respectively.

160-151

Metric / Imperial Code No.

Range

Minimum Reading

160-151 160-153 160-155

0 - 450mm/0 - 18" 0 - 600mm/0 - 24" 0 - 1000mm/0 - 40"

0.02 mm/0.001" 0.02 mm/0.001" 0.02 mm/0.001"

Long Jaw Vernier Caliper SERIES 534 • The jaws’ measuring faces have a radius for accurate inside diameter (ID) measurement.

• Inside and outside measurements can be read directly from the upper and lower slider graduations respectively.

Metric / Imperial Code No.

Range

Jaw Depth

Graduation

534-105 534-106

0 - 300mm/0 -12" 0 - 500mm/0 - 20"

90mm 200mm

0.02mm/0.001" 0.02mm/0.001"

15

Height Gauges High-precision Height Gauge Linear Height Series 518 HP 2D Measurement System • High-accuracy height gauge for precision measurement and inspection of moulds and parts • Dirt-resistant built-in scale for reliable shop floor use

• Multiple connectivity options: printer, PC, wired or wireless systems • Pneumatic suspension system with adjustable air-cushion height

Metric / Imperial Code No.

Model

Power grip

Measuring range (stroke)

Resolution

518-360-13

LH-600F

Without power grip

0-24"/0-600mm

0.0001/0.001/0.01/ 0.1mm (selectable) 0.000001/0.00001/0.0001/0.001" (selectable)

518-361-13

LH-600FG

With power grip

0-24"/0-600mm

0.0001/0.001/0.01/ 0.1mm (selectable) 0.000001/0.00001/0.0001/0.001" (selectable)

QM-Height SERIES 518 — High-performance Height Gauge

• This highly precise height gauge is useful not only in height measurements but also in a wide range of applications such as measurement of steps, inside and outside diameters, and runouts.

• Easy-to-view, simple control panel enables most measurements to be made with a single keystroke.

• Pneumatic floating models, which feature an air-suspension mechanism, can move smoothly on a surface plate.

16

Metric Code No.

Measuring range (stroke)

Resolution

518-240 518-242 518-244 518-246

0 to 465mm (350mm) 0 to 715mm (600mm) 0 to 465mm (350mm) 0 to 715mm (600mm)

0.001/ 0.005mm 0.001/ 0.005mm 0.001/ 0.005mm 0.001/ 0.005mm

Code No.

Measuring range (stroke)

Resolution

518-241

0 to 465mm (350mm/14")

0.001/0.005 mm 0.00005/0.0001/0.0002" (Selectable)

518-243

0 to 715mm (600mm/ 24")

0.001/0.005 mm 0.00005/0.0001/0.0002" (Selectable)

518-245

0 to 465mm (350mm/14")

0.001/0.005 mm 0.00005/0.0001/0.0002" (Selectable)

518-247

0 to 715mm (600mm/ 24")

0.001/0.005 mm 0.00005/0.0001/0.0002" (Selectable)

Metric / Imperial

Height Gauges Digital Gauges ABSOLUTE Digimatic Height Gauge with Ergonomic Base

• New standard model which features a prismatic column and offers excellent rigidity and accuracy.

• Allows smooth elevation by the slider adjustment wheel.

• U-WAVE-T/TC/TCB (wireless data transmitter) can be installed on the back of the display unit.

Metric / Imperial Code No.

Range

Resolution

570-412 570-413 570-414

12"/300mm 18"/450mm 24"/600mm

0.01mm/0.0005" 0.01mm/0.0005" 0.01mm/0.0005"

Code No.

Range

Resolution

192-670-10

12"/300mm

0.01mm/0.005mm selectable 0.0005"/0.0002"selectable

Digimatic Height Gauge SERIES 192 - Multi-function Type with SPC Data Output • Double-column structure ensures stable measurements.

• Ergonomic base fits comfortably in the hand.

• Inclined handle improves slider ergonomics.

• Bidirectional touch-trigger probe is available as an optional accessory.

• Provided with a long scriber (150 mm).

Metric / Imperial

Optional Accessories Code No.

Type

Description

905338 905409

F F

Connection cable for IT /DP/MUX (1 m) Connection cable for IT /DP/MUX (2 m)

17

Depth Gauges Depth Micrometer Depth Micrometer (Interchangeable Rod Type) • Interchangeable rods provide a wide measuring range.

• Data output function allows integration into statistical process control and measurement systems. (Refer to page 42.)

Metric / Imperial Code No.

Range

Resolution

329-350-30

0-6"/150mm x 4" base

0.001 mm/0.00005"

Code No.

Range

Graduation

129-110 129-111 129-115 129-112 129-116 129-153

0-75mm x 63mm base 0-100mm x 63mm base 0-100mm x 100mm base 0-150mm x 63mm base 0-150mm x 100mm base 0-300mm x 100mm base

0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm

Code No.

Range

Graduation

129-127 129-128 129-132

0-4" x 2.5" base 0-6" x 2.5" base 0-6" x 4" base

0.001" 0.001" 0.001"

Metric

329-350-30

Imperial

129-110

Depth Micrometer SERIES 128 • Measuring rod diameter: ø4 mm.

• With measuring rod clamp.

Note: The clamp is unseen in the picture.

128-101

• Carbide-tipped measuring rod model is available.

• With ratchet stop for constant measuring force.

Metric

128-102

18

Code No.

Range

Graduation

128-101 128-102

0-25mm x 63mm base 0-25mm x 100mm base

0.01mm 0.01mm

Code No.

Range

Graduation

128-105

0-1" x 2.5"base

0.001"

Imperial

Depth Gauges Caliper Type ABSOLUTE Digimatic Depth Gauge SERIES 571

571-212-30

• Enables stable depth measurement with a resolution of 0.01 mm.

• Data output function allows integration into statistical process control and measurement systems. (Refer to page 42.)

Optional longer extension bases are available.

Metric / Imperial Code No.

Range

Resolution

571-211-30 571-212-30

150mm/6" x 0.02mm/.001" 200mm/8" x 0.02mm/.001"

0.0005"/0.01mm 0.0005"/0.01mm

Optional Accessories Code No.

Type

Description

959149 959150

F F

Connection cable (1 m) Connection cable (2 m)

• Standard Vernier gauge for depth measurement.

• Optional longer extension bases are available.

Vernier Depth Gauge SERIES 527

Metric 527-202

Depth Gauge Attachment Optional Accessory for Calipers

Code No.

Range

Minimum Reading

527-202

0-200mm x 0.02mm

0.05mm

• Attaching this depth gauge attachment to the depth measurement face of the caliper makes depth measurement accurate and secure.

Metric Code No.

Size

050083-10 050084-10

75mm 100mm

050084-10

19

Depth Gauges Indicator Type ABSOLUTE Digimatic Depth Gauge SERIES 547 • Easy-to-read digital display effectively prevents misreading.

• An analog bar indicator on the LCD is convenient for observing subtle movements such as the approach to tolerance.

• Data output function allows integration into statistical process control and measurement systems. (Refer to page 42.)

Metric Code No.

Range

Resolution

547-211A

0-200mm x 0.01mm

0.01mm

Code No.

Range

Resolution

547-217A

0-200mm/8" x 0.01mm/.0005" 0.0005"/0.01 mm

Metric / Imperial

547-211A

20

Optional Accessories Code No.

Type

Description

02AZF700

—

Connecting unit for U-WAVE-TM/TMB (for ID-C/ ID-F Series 12.7mm/ 0.5"ch type only)

Indicators Digimatic Indicators ABSOLUTE Digimatic Indicator ID-CNX SERIES 543 — Standard Type • ID-C Series is a next-generation indicator with many new functions, supporting bidirectional communication.

With the addition of the appropriate data cable and software, remote zero setting and gauge setting can all be implemented from a connected PC, thereby improving your work efficiency.

• The digital display and analog bar indications help you to intuitively read the approach to the origin and tolerance values.

• The next calibration due date can be set with an alarm to improve instrument management.

• The ABS (ABSOLUTE) scale restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.

• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page 42.)

Metric Code No. ISO/JIS Type 543-700B

Range

Resolution

12.7mm

0.0005mm

Range

Resolution

50.8mm/2" 25.4mm/1.0"

0.0005mm/.0002" 0.01mm/.0005"

Metric / Imperial Code No. 543-700B

ISO/JIS Type 543-731B 543-726B

ABSOLUTE Digimatic Indicator ID-N/B SERIES 543 — with Dust/Water Protection Conforming to IP66 • Slim body design (body width: only 35 mm).

• Rated to IP66: Can be used confidently even in adverse environments.

• The ABS (ABSOLUTE) scale restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.

• Back plunger design (ID-B) is widely used for dial indicators.

A 5 mm-stroke plunger with a higher degree of accuracy has been implemented by adopting a direct reading scale for plunger displacement.

• Tolerance judgment can be performed by setting upper and lower tolerance limits.

• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page 42.)

Metric / Imperial Code No.

Range

ASME/ANSI/AGD Type 543-571 12.7mm/0.5"

21

Resolution 0.01mm/.0005"

Indicators Digimatic Indicators ABSOLUTE Digimatic Indicator ID-CNX SERIES 543 — Standard Type • A standard model of indicator that is reliable and easy to use with basic functions.

• This model consumes less power than other advanced models and can operate longer without frequent battery replacement.

• The ABS (ABSOLUTE) scale restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating overspeed errors.

• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page 42.)

Metric Code No. ISO/JIS Type 543-790B-10

Range

Resolution

12.7mm

0.001mm

Range

Resolution

12.7mm/.5" 12.7mm/.5"

0.001mm/.00005" 0.01mm/.0005"

Range

Resolution

Metric / Imperial Code No. ISO/JIS Type 543-791-10 543-782-10

543-790B-10

Metric / Imperial Code No.

ASME/ANSI/AGD Type 543-792B-10 12.7mm/.5" 543-783-10 12.7mm/.5" 543-783B-10 12.7mm/.5"

0.001mm/.00005" 0.001mm/.00005" 0.001mm/.00005"

ABSOLUTE Digimatic Indicator ID-U (Slim and Economical Design) • Cost-effective and user-friendly type with basic functions.

• Battery life: approx. 20,000 hours in continuous use.

• The ABS (ABSOLUTE) scale restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.

• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page 42.)

Imperial / Metric Code No. 575-123

Range

Resolution

ASME/ANSI /AGD type 575-123 25.4mm/1"

0.01mm/.0005"

Optional Accessories Code No. 02AZE200

22

Type

Description U-WAVE-T mounting bracket

Indicators Digimatic Indicators ABSOLUTE Digimatic Indicator ID-CAX SERIES 543 — Peak-Value Hold Type • The Peak Hold-Type Digimatic Indicator.

• GO/NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values.* • Five buttons, status icons, and clear button indications allow easy operation and various functions.

• Wide display and new analog bar graph are standard on all models.

• The ABS (ABSOLUTE) scale restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.

• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. (Refer to page 42.)

• By using the parameter setup kit (optional) and the dedicated software, the functions and the parameters can be configured using a computer.

• *Tolerance judgment results cannot be output.

Imperial / Metric Code No.

Range

Resolution

0.5"/12.7mm

0.00005/0.0001/0.0005", 0.001/0.01mm (selectable)

ISO/JIS Type 543-301-10

Optional Accessories Code No.

Type

Description

02AZD810D

—

02AZF670

—

U-WAVE-R U-WAVE-TM/TMB mounting bracket: for Digimatic Indicators

ABSOLUTE Digimatic Indicator ID-CGX SERIES 543 — Bore Gauge Type • Dedicated to inside diameter measurement with minimumvalue holding and tolerance judgment functions*.

• Use together with a Mitutoyo bore gauge • Five buttons, status icons, and clear button indications allow easy operation and various functions.

• Wide display and analog bar graph are standard on all models.

• Up to three sets of master values and upper / lower tolerance values can be stored to simplify the master setting.

• By using the parameter setup kit (optional) and the dedicated software, the functions and the parameters can be configured using a computer.

• * Tolerance judgment results cannot be output.

Metric / Imperial Code No. ISO/JIS Type 543-311B-10

Range

Resolution

12.7mm/.5"

0.001mm

23

Indicators Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation The Mitutoyo Series 2 standard diameter dial indicator with metric reading offers simplicity, accuracy and durability for any application, making it our most popular indicator.

This indicator conforms to ISO/JIS Standards.

• This model is the most popular Mitutoyo indicator with excellent accuracy and durability. Standard 0.01 mm graduation dial indicators have a bezel with an outside diameter of 57 mm.

• The indicator is highly durable thanks to its oil- and water-tight design, quenched hardened stainless-steel, carbide contact point, and a grand gear made of wear- and deformationresistant material.

• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.

Metric Code No.

Range/Rev

Graduation

Dial Reading

ISO/JIS Type 2046A

10 (1)mm

0.01mm

±0-100

SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation • Standard 0.001 mm and 0.005 mm graduation dial indicators have a bezel with an outside diameter of 57 mm.

These indicators provide excellent accuracy and durability.

• The indicator is highly durable thanks to its oil- and water-tight design, quenched hardened stainless-steel, carbide contact point, and a grand gear made of wear- and deformationresistant material.

• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.

• The indicator uses jeweled bearings, providing excellent indication sensitivity and durability.

Metric

2109A-10

24

Code No.

Range/Rev

Graduation

Dial Reading

ISO/JIS Type 2109A-10 2118A-10

1 (0.2)mm 5 (0.2)mm

0.001mm 0.001mm

0-100-0 0-100-100

Indicators Dial Indicator SERIES 2 — Standard Type, Inch Reading

Imperial Code No.

Range/Rev

Graduation

Dial Reading

2414A

0.5 (0.1)"

0.001"

±0-100

2922A

0.125 (0.05)"

0.0005"

0-25-0

2358A-10

0.5 (0.01)"

0.0001"

0-10

2805A-10

0.05 (0.01)"

0.0001"

0-5-0

2923A-10

0.05 (0.01)"

0.0001"

0-5-0

ANSI /AGD type

2414A

SERIES 2 — Long Stroke Type • Long stroke dial indicators with measuring range of 20 mm or more have a ø57 mm bezel.

• The indicator is highly durable thanks to its oil- and water-tight design, quenched hardened stainless-steel, carbide contact point, and a grand gear made of wear- and deformationresistant material.

• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.

• The lifting lever (optional) cannot be used with models that are water-proof or which have a measurement range of 30 mm.

Metric Code No.

Range/Rev

Graduation

Dial Reading

ISO/JIS type 2050A 2052A

20 (1)mm 30 (1)mm

0.01mm 0.01mm

±0-100 ±0-100

Range/Rev

Graduation

Dial Reading

1 (0.1)" 2 (0.1)" 1 (0.1)"

0.001" 0.001" 0.001"

±0-100 ±0-100 100-0

Imperial 2050A Code No. ANSI /AGD type 2416A 2424A-19 2904A

25

Indicators Dial Indicator SERIES 1 — Compact Type, Extra Small Diameter • These compact, space-saving dial indicators make it easy to incorporate into gaging jigs.

• The indicator is highly durable thanks to its oil- and water-tight design, quenched hardened stainless-steel, carbide contact point, and a grand gear made of wear- and deformationresistant material.

• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.

Metric

1911A-10

Code No.

Range/Rev

Graduation

Dial Reading

ISO/JIS type 1911A-10 1003A

2.5 (1)mm 4 (1)mm

0.01mm 0.01mm

0-50-0 0-50-0

1003A

SERIES 1 — Compact Type, Small Diameter • Compact dial indicators ideal for restricted space applications in gaging jigs.

• The indicator is highly durable thanks to its oil- and water-tight design, quenched hardened stainless-steel, carbide contact point, and a grand gear made of wear- and deformationresistant material.

• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.

Metric Code No.

Range/Rev

Graduation

Dial Reading

5 (1)mm 5 (1)mm

0.01mm 0.01mm

0-100 0-50-0

5 (1)mm

0.01mm

0-100

Code No.

Range/Rev

Graduation

Dial Reading

ANSI /AGD type w/ lug 1410A 1411A Flat-back 1411AB

0.25 (0.1)" 0.25 (0.1)"

0.001" 0.001"

0-100 0-50-0

0.25 (0.1)"

0.001"

0-50-0

ISO/JIS type w/ lug 1044A 1045A Flat-back 1044AB

Imperial 1044A

26

Indicators Dial Indicator SERIES 3 — Long Stroke Type, Large Diameter • Dial indicators with a large-diameter dial face for easy reading.

• The indicator is highly durable thanks to its oil- and water-tight design, quenched hardened stainless-steel, carbide contact point, and a grand gear made of wear- and deformationresistant material.

• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.

Metric

3058A-19

Code No.

Range/Rev

Graduation

Dial Reading

w/lug 3052A-19 3058A-19 3062A-19

30 (1)mm 50 (1)mm 100 (1)mm

0.01mm 0.01mm 0.01mm

0-100 0-100 0-100

SERIES 2 — Special Dial Indicators • Adjustable hand dial indicator • The hand position can be adjusted independently of the vertical movement of the spindle by rotating the top knob.

Metric Code No.

Range/Rev

Graduation

Dial Reading

w/lug 2048A-10

10 (1)mm

0.01mm

0-100

2048A-10

Back Plunger Type Dial Indicators The Mitutoyo back plunger dial indicator is designed with the measuring spindles on the back of the indicator. This type of indicator offers the same precision and durability as other Mitutoyo dial indicators, but is ideal for use in small spaces where

graduations of standard dial indicators are difficult to see.

Back plunger type dial indicators are suitable for mounting onto levelling machine tool tables or inspection jigs, and for use in situations where standard dial indicators are difficult to read.

Metric Code No. ISO/JIS type 1160A

Range/Rev

Graduation

Dial Reading

5 (1)mm

0.01mm

0-100

1160A

27

Indicators Dial Test Indicators Dial Test Indicator SERIES 513 — Standard Type • Provides easy access to narrow or recessed areas that cannot be reached with conventional dial indicators. Five types are available: standard, standard (20° Tilted face), vertical, horizontal, and universal, allowing users to select the model most suited to their needs.

• Newly designed contact point holder prevents backlash and permits smooth pointer operation.

• Ruby tip has wear-resistance several times greater than a carbide tip and, since it is non conductive, it can be used safely on an electrical discharge machine.

• The pointer and carbide contact point are weakly magnetic.

Note 1: Magnetic material is used for some internal parts.

• Contact point length is printed on dial face to avoid accuracy issues. Note 2: Attaching a contact point of incorrect length will lead to measurement failure.

• Glare-free flat crystal face allows easy reading of graduations.

Multi-layer and composite coatings provide a more stain resistant, anti-reflective crystal.

• Bonding the bezel and crystal together leaves no gap for cutting fluid or oil to penetrate through to the dial face.

(Note that this type is NOT water-proof.)

• The main unit is equipped with three dovetails to which the stem with dovetail groove ø6 (standard accessory) can be attached. This greatly improves convenience as the attachment location can be adjusted as needed.

• Metric Dial Test Indicator is inspected according to JIS B 7533:2015. Standard, 20º tilted face, and vertical types are inspected with the dial face in the upward orientation, while the horizontal type is inspected with the dial face in the vertical orientation to guarantee their accuracy.

Metric Code No.

513-415-10E

Basic Set 513-404-10E 513-474-10E 513-464-10E 513-415-10E 513-425-10E 513-401-10E Full Set 513-404-10T

Range/Rev

Contact Point Length

Dial Reading

0.8 x 0.01mm - Basic Set 0.8 x 0.01mm - Basic Set 0.8 x 0.01mm - Basic Set 1.0 x 0.01mm - Basic Set 0.6 x 0.002mm 0.14 x 0.001mm

20.9mm 20.9mm 20.9mm 44.5mm 14.7mm 12.8mm

0-40-0 0-40-0 0-40-0 0-50-0 0-100-0 0-70-0

0.8 x 0.01mm - Full Set

20.9mm

0-40-0

Range/Rev

Contact Point Length

Dial Reading

Imperial Code No. Basic Set 513-402-10E 513-412-10E Full Set 513-402-10T 513-406-10E

28

0.03" x 0.0005" - Basic Set 19.9mm 0.03" x 0.0005" - Basic Set 33.9mm

0-15-0 0-15-0

0.03" x 0.0005" - Full Set

0-15-0

19.9mm

Indicators Dial Test Indicators Pocket Type Dial Test Indicator SERIES 513 • This test indicator series is slimmer than standard test indicators without a clutch lever, making it more suitable for measuring deep points.

• Contact point length is printed on dial face to avoid accuracy issues. Note 1: Attaching a contact point of incorrect length will lead to measurement failure.

• Glare-free flat crystal face allows easy reading of graduations.

Multi-layer composite coatings make the crystal more anti‑reflective and stain resistant.

• Bonding the bezel and crystal together leaves no gap for cutting fluid or oil to penetrate through to the dial face.

(Note that this type is NOT water-proof.)

• Clutch type (with a clutch lever) • A ø2 mm carbide contact point is supplied as standard.

• Metric Dial Test Indicator is inspected according to JIS B 7533:2015. We guarantee accuracy by inspecting with the dial face facing upward.

Metric Code No. Full Sets 513-517-10T 513-515-10T

Range/Rev

Contact Point Length

Dial Reading

0.8 x 0.01mm - Full Set 1.0 x 0.01mm - Full Set

17.4mm 41.0mm

0-40-0 0-50-0

Range/Rev

Contact Point Length

Dial Reading

0.04 x 0.001" - Full Set

0.91"/23.1mm

0-20-0

513-517-10T

Imperial Code No. Full Set 513-518-10T

513-518-10T

29

Indicators Dial Indicator Applications ABSOLUTE Digimatic Thickness Gauges SERIES 547 • Standard Type (Resolution: 0.01 mm) • High Accuracy Type (Resolution: 0.0005 mm) • Thickness gauges can quickly measure the thickness of thin products such as paper and felt.

• Using a ceramic contact and anvil, there is no need to worry about rust.

Imperial / Metric Code No.

547-300A

Standard Type 547-300A High Accuracy Type 547-400A

Range

Resolution

10mm/.4"

0.01mm/.0005"

12.7mm/.5"

0.001mm/.0005"

547-400A

Thickness Gauges SERIES 547, 7 • Standard Type (Graduation: 0.01 mm) • Integrated moulding of the bezel and crystal ensures protection against water and oil penetration via the front face.

Metric Code No. Standard Type 7327A 7301A 7305A 7323A

7301A

7323A

30

Range

Resolution

0-1mm 0-10mm 0-20mm 0-20mm

0.001mm 0.001mm 0.001mm 0.001mm

Indicators Stands Magnetic Stands SERIES 7

7010S-10

7012-10

• Mitutoyo magnetic stands clamp to iron or steel surfaces with a strong force and are indispensable for temporarily mounting a dial test indicator (or dial indicator) onto a machine tool or fixture for general alignment applications.

• Vertical / horizontal mounting holes and bushes are available for attaching dial test indicators and dial indicators.

• Models 7014-10, 7014E-10, 7015-10, 7031-10, 7032-10 and 7033-10 have a dovetail groove in the swivel holder for attaching dial test indicators that are equipped with a dovetail.

7011S-10

7014E-10

Code No.

Range

7010S-10 7011S-10 7012-10 7014E-10 7033-10

Magnetic Stand Magnetic Stand with Fine Adjustment Magnetic Stand Flexible Type Magnetic Stand Mini Type Magnetic Stand One Mechanical Lock Type

7033-10

Dial Gauge Stands SERIES 7 • Dial Gauge Stands are designed for comparison measurements of size using a dial indicator or Digimatic Indicator. An anvil is provided as standard.

• Anvil: ø58 mm serrated anvil, ø58 mm flat anvil, 90 mm square anvil and domed anvil (optional).

• Vertical fine adjustment is available with one-touch control thanks to the parallel spring suspension.

• Stem Hole Ø8, Ø9.53mm

Metric

7002-10

Code No.

Clamping range on column

Stem hole

Remarks

7001-10 7002-10

0 to 95mm 0 to 95mm

ø8, ø9.53mm ø8, ø9.53mm

With serrated anvil With flat anvil

31

Inside Measuring Instruments Holtest Holtest SERIES 368 — Three-point/Two-point Bore Micrometers

368-168 Metric Code No.

Range

Graduation

368-166 368-167 368-168 368-169

20-25mm 25-30mm 30-40mm 40-50mm

0.005mm 0.005mm 0.005mm 0.005mm

• These are standard analog three-point bore micrometers.

(A two-point contact type with measuring range of 2 to 6 mm diameter is available to measure extremely small holes.)

• Three-point bore micrometer allows stable measurement through self centering.

• Can measure close to the bottom of a blind hole.

• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.

• Three-point type can measure deep holes by attaching an extension rod (optional).

368-912

368-913

Metric Code No.

Metric Range

Non-interchangeable Head Sets 368-912 12-20mm

Code No.

Graduation

Range

Non-interchangeable Head Sets 368-913 20-50mm

0.005mm

Graduation 0.005mm

Inside Micrometers Tubular Inside Micrometers SERIES 137 — Extension-Rod Type • Wide range of inside measurements possible by combining extension rods and anvils with the micrometer head.

• A reference gauge is necessary for reference point setting.

• Two types of measuring faces are available: with or without carbide tip.

• An optional reference gauge, such as Gauge Block Accessory Set, CERA inside Micro Checker or a setting ring (nominal size 300 mm or less), is required for accurately setting the micrometer before measuring.

137-205 Metric

Imperial

Code No.

Range

Graduation

Code No.

Range

Graduation

137-201 137-202 137-203 137-204

50-150mm Extension Rod Type 50-300mm Extension Rod Type 50-500mm Extension Rod Type 50-1000mm Extension Rod Type

0.01mm 0.01mm 0.01mm 0.01mm

137-212

2-12" Extension Rod Type

0.001"

32

Inside Measuring Instruments Inside Micrometers Tubular Inside Micrometers SERIES 137 — Extension-Rod Type (main unit) • Micrometer head for Extension-rod Type inside micrometer.

• A reference gauge is necessary for reference point setting.

• An optional reference gauge, such as Gauge Block Accessory Set or a setting ring, is required for accurately setting the micrometer before measuring.

137-011 Metric Code No.

Range

Graduation

137-011

50-63mm Extension Rod Type

0.01mm

Inside Micrometers SERIES 145 — Caliper Type

145-185

• This is an analog version of the SERIES 345 caliper type micrometer for inside measurement.

• Carbide-tipped measuring faces.

• Equipped with a constant measuring-force device.

• An optional reference gauge, such as Gauge Block Accessory Set, CERA Inside Micro Checker (more than 25 mm) or a setting ring (nominal size below 300 mm), is required for accurately setting the micrometer before measuring.

Metric Code No.

Range

Graduation

145-185

5 - 30mm

0.01mm

Inside Micrometers SERIES 141 — Interchangeable-Rod Type

141-101 Metric

• Wide range of inside measurements possible by combining one or more interchangeable rods.

• For models supplied with more than one interchangeable rod, the full measuring range is achieved by combining spacing collars with the rods.

Imperial

Code No.

Range

Graduation

Code No.

Range

Graduation

141-101 141-205 141-206

25 - 50mm 50 - 200mm 50 - 300mm

0.01mm 0.01mm 0.01mm

141-102 141-208 141-233

1-2" 2-8" 2-12"

0.001" 0.001" 0.001"

Range

Graduation

Metric Code No.

Micrometer head only model 141-025 50 - 63mm

0.01mm

33

Inside Measuring Instruments Bore Gauges Bore Gauges SERIES 511 • This is a bore gauge for measuring 18 to 400 mm inside diameter. It is suitable for highly accurate measurements.

• Carbide-tipped contact point and anvil for durability and wear resistance.

• Optional extension rods can be attached for measuring deep holes.

511-702 Metric

Imperial

Code No.

Range

Graduation

Code No.

Range

Graduation

511-721-20 511-722-20 511-723-20 511-711-20 511-712-20 511-713-20

18 - 35mm 35 - 60mm 50 - 150mm 18 - 35mm 35 - 60mm 50 - 150mm

0.001mm 0.001mm 0.001mm 0.01mm 0.01mm 0.01mm

511-753-20 511-743-20

2-6" 2-6"

0.0001" 0.0005"

Code No.

Range

Graduation

511-921-20

18 - 35mm

0.01mm

Metric

34

Measurement Data Management Measurement Data Input Unit Digimatic Gauge/PC Data Input Device USB Input Tool Direct USB-ITN • Converts measurement data to keyboard signals and directly inputs them to spreadsheet software such as Excel and Notepad.

• When using with optional software, you can easily create Microsoft Excel worksheets, enabling further improvement of work efficiency.

USB-ITN

USB-ITN System Configuration

Digimatic Gauges

Gauge selector 3 (optional)

USB Input Tool Direct USB-ITN

Foot Switch (optional)

Digimatic Indicator

Gauge

Foot Switch (optional) 937179T

PC

USB-FSW (optional)

USB-ITPAK V3.0/V2.1 (optional)

Digimatic Caliper

Digimatic Micrometer

Code No.

Data Switch

Code No.

Data Switch

06AFM380A



06AFM380D

-

06AFM380B



06AFM380E

-

06AFM380C



06AFM380F

-

Gauge

Option for USB-ITN USB Foot Switch Adapter USB-FSW 06ADV384

Measurement Data Collection Software USB-ITPAK V3.0/V2.1

• When using a foot switch in combination with USB-ITN, the optional USB-FSW and USB-ITPAK V3.0/V2.1 are required.

• When the measuring gauge and USB-ITN have no data pushbuttons, the optional USB-ITPAK V3.0/V2.1 is required.

35

Measurement Data Management Accessories SPC Data Cables • SPC Data Cables are used in conjunction with USB Input Tools, DP-1VA Data Logger, MUX Multiplexer etc.

• More information on cable selection can be found in the main Mitutoyo catalogue.

Code No.

Description

Code No.

Description

905338 905409 959149 959150 965013 965014

SPC Data Cable 1m SPC Data Cable 1m SPC Data Cable 1m SPC Data Cable 2m SPC Data Cable 1m SPC Data Cable 1m

937387 05CZA624 05CZA625 05CZA663 06AGL011 06AGL021

SPC Data Cable 1m SPC Data Cable 1m SPC Data Cable 2m SPC Data Cable 2m SPC Data Cable 1m SPC Data Cable 2m

Input Tool • An input tool allows the easy inputting of measurement data from a Mitutoyo gauge (with data output feature) into a PC. • More information on Input Tools can be found in the main Mitutoyo Catalogue.

USB Direct Cables

Code No.

Description

264-020

Digimatic USB Input Tool

• Data USB Input Cable converts data from the caliper to be read directly in Microsoft Excel via a USB port.

• Data can be further enhanced by using Mitutoyo USB-ITPAK Software.

• More information on the USB Direct Cables can be found in the main Mitutoyo Catalogue.

Code No.

Description

Code No.

Description

06AFM380A

USB Input Tool Direct Cable for Coolant Proof Calipers

06AFM380E

06AFM380B

USB Input Tool Direct Cable for Coolant Proof Micrometers

06AFM380F

USB Input Tool Direct for Non Coolant Digimatic Micrometers and Hardness Testers USB Input Tool Direct for ID-CX, ID-C, ID-SS, ID-SX Digimatic Indicators

06AFM380C

USB Input Tool Direct for Non Coolant Proof Digimatic Calipers

06AGQ001F

USB Input Tool Direct for ID-C/ID-F Digital Indicators

06AFM380D

USB Input Tool Direct for ID-H, ID-F style Digimatic Indicators

36

Measurement Data Management Accessories Footswitch • Used in conjunction with USB Input Tool or USB Direct Cables for Data output of Digimatic Tools.

• More information on Footswitches can be found in the main Mitutoyo catalogue.

Code No.

Description

937179T

Footswitch

Data Management Software • Measurement Data Collection Software.

• Excel input settings.

• 3 methods of measurement selection: Sequential, Batch and Individual Measurement.

• Software protected by a USB Dongle requirement.

• Version 3.0 USB-ITPAK software only supports 32 and 64 bit platforms.

• More information on ITPAK software can be found in the main Mitutoyo catalogue.

Code No.

Description

06AGR543

USB-ITPAK V3.0

37

Measurement Data Management Accessories U Wave Wireless Data Management Cables • The Mitutoyo U-Wave system enables easy wireless data communication from a measuring tool to a PC using Digimatic protocol.

• Measurement workability is improved by eliminated the long and cumbersome data cables usually required and the userfriendly interface allows data to be loaded into any software product that accepts keyboard input, such as Excel* or Notepad.

• More information on U Wave cables can be found in the main Mitutoyo catalogue.

Code No.

Description

02AZD790A 02AZD790B 02AZD790C 02AZD790D

U-Wave Cable CP Caliper Type U-Wave Cable CP Micrometer Type U-Wave Cable Digimatic Caliper Type U Wave Cable for ID-H and ID-F Digital Indicators U-Wave Cable Plain Type for ID-CX, ID-C, ID-U, ID-SS and ID-SX Indicators U Wave T Dedicated Connection Cable

02AZD790F 02AZG011

Transmitters U Wave Transmitters • Transmits the measurement data displayed on the instrument to the U-Wave receiver.

• More information on U Wave Transmitters can be found in the main Mitutoyo catalogue.

38

Code No.

Description

02AZD730G 02AZD880G

U Wave Transmitter (IP67 Type) U Wave Transmitter (Buzzer Type)

Measurement Data Management Measurement Data Wireless Communication System Measurement Data Wireless Communication System U-WAVE-TM/TC (U-WAVE fit) Transmitter/connecting unit

264-622

02AZF310

264-621

02AZF300

Specifications Code No.

Size/Variant/Range

264-622 264-623 264-620 264-621

Connectable measuring instruments

Model

Micrometer Micrometer Caliper Caliper

U-WAVE-TM (IP67 type) U-WAVE-TM (buzzer type) U-WAVE-TC (IP67 type) U-WAVE-TC (buzzer type)

• IP67 type is resistant to water and dust ingress. Buzzer type notifies data reception by buzzer sound and LED.

Code No. 264-622 264-623 264-620 264-621

Size/Variant/Range

Connectable measuring instruments

Model

Micrometer Micrometer Caliper Caliper

U-WAVE-TM (IP67 type) U-WAVE-TM (buzzer type) U-WAVE-TC (IP67 type) U-WAVE-TC (buzzer type)

• Fixed to transmission unit and inserted into output connector of Digimatic gauge.

• 02AZF310 ensures water-proof performance only when attached to measuring instruments of IP67 type.

• Water-proof performance is ensured only when attached to measuring instruments of IP67 type.

Compatibility of measuring tool and unit Digimatic gauge

Connecting unit/connecting cable

Transmitter

Receiver

Digimatic Micrometers

Standard type 02AZF310

IP67 type U-WAVE-TM 264-622

U-WAVE-R 02AZD810D Design registered in Japan

Digimatic Calipers

Standard type 02AZF300

Buzzer type U-WAVE-TC 264-621

IP67 type U-WAVE-TC 264-620

U-WAVE-R 02AZD810D Design registered in Japan

ID-CNX/ ID-FNX Series (12.7mm type only) 02AZF700

Buzzer type U-WAVE-TM 264-623

IP67 type U-WAVE-TM 264-622

U-WAVE-R 02AZD810D Design registered in Japan

Digimatic Indicators and Others

• To use this product, conformity to the applicable radio law in each country is required.

Code number differs depending on the destination country.

39

Measurement Data Management Measurement Data Wireless Communication System Measurement Navigation Applications Transmitter/connecting unit

264-626

02AZF310

264-625

02AZF300

Specifications Code No.

Size/Variant/Range

264-626 264-627 264-624 264-625

Connectable measuring instruments

Model

For Digimatic micrometers For Digimatic micrometers For Digimatic calipers For Digimatic calipers

U-WAVE-TMB (IP67 type) U-WAVE-TMB (buzzer type) U-WAVE-TCB (IP67 type) U-WAVE-TCB (buzzer type)

Choose a connecting unit compatible with your gauge.

Code No.

Size/Variant/Range

02AZF310 02AZF300 02AZF960 02AZF700

Connectable transmitter U-WAVE-TMB/TCB (IP67 type) U-WAVE-TCB (for standard type) U-WAVE-TM (for QuantuMike*) ID-CNX/ID-FNX (12.7mm type only)

• Water-proof performance is ensured only when attached to measuring instruments of IP67 type.

Compatibility of measuring tool and unit Digimatic gauge

Connecting unit/connecting cable

Transmitter

Digimatic Micrometers

Standard type 02AZF310

QuantuMike 02AZF960

Buzzer type U-WAVE-TMB 264-627

IP67 type U-WAVE-TMB 264-626

Digimatic Calipers

Standard type 02AZF300

Coolant-proof type 02AZF310

Buzzer type U-WAVE-TCB 264-625

IP67 type U-WAVE-TCB 264-624

Buzzer type U-WAVE-TMB 264-627

IP67 type U-WAVE-TMB 264-626

Digimatic Indicators and Others

ID-CNX/ ID-FNX Series (12.7mm type only) 02AZF700

• 02AZF960 is applicable to new models (293-14X-40/293-18X-40).

40

Measurement Data Management Data Logger/Multiplexer Mini-Printer Equipped with Data Logging Function SERIES 264 — Digimatic Mini-Processor DP-1VA LOGGER In addition to the conventional (DP-1VR) printing and statistical calculation functions, data logging and USB output functions are added and enhanced.

264-505 DP-1VA LOGGER

Code No.

Optional Accessories

264-505*

1) USB cable (A-microB) : 06AFZ050 (1m) 2) Foot switch: 937179T

Consumable Items

• This is a palm-sized printer used to print measurement data from Digimatic gauges or to perform statistical analysis.

• The versatile DP-1VA LOGGER printer not only prints measurement data, but performs a variety of statistical analyses, draws histograms and D-charts and also performs complex operations on Xbar-R control charts.

• The data logger function allows storage of up to 1,000 pieces of data in memory and batch transfer of stored data to an Excel-format inspection certificate, etc., by connecting to a PC via a USB cable (optional).

Printing paper (10 rolls): 09EAA082

Optional Accessories Code No.

Description

06AFZ050

USB cable (A-microB) 1m - for DP-1VA Logger

41

Reference Software dedicated to inspection and quality control

Recording Measurement Results

page 41

page 36 page 37

page 36

page 38

42

Sensors and Embedded Equipment Linear Scales Linear Scales AT715 Series 539 • Uses an Absolute® electromagnetic induction system to achieve IP67 environmental resistance.

• Detects and outputs the absolute position – no reference point setup needed at each power on.

• Abnormal calculations do not occur as a result of electronic noise.

• Very suitable scale for mounting on lathes and milling machines and other machining tools with difficult mounting positions.

• Consult technical manual for overall lengths and mounting details.

Code No.

Model

Range

Code No.

Model

Range

539-801N 539-802R 539-803N 539-804N 539-805N 539-806N 539-807N 539-808N 539-809N 539-811N 539-813N 539-814N 539-815N 539-816N 539-817N 539-818N

AT715-100 AT715-150 AT715-200 AT715-250 AT715-300 AT715-350 AT715-400 AT715-450 AT715-500 AT715-600 AT715-700 AT715-750 AT715-800 AT715-900 AT715-1000 AT715-1100

100 (4") 150 (6") 200 (8") 250 (10") 300 (12") 350 (14") 400 (16") 450 (18") 500 (20") 600 (24") 700 (28") 750 (30") 800 (32") 900 (36") 1000 (40") 1100 (44")

539-819N 539-820N 539-821N 539-822N 539-823N 539-824N 539-825N 539-860N 539-861N 539-862N 539-863N 539-864N 539-865N 539-866N

AT715-1200 AT715-1300 AT715-1400 AT715-1500 AT715-1600 AT715-1700 AT715-1800 AT715-2000 AT715-2200 AT715-2400 AT715-2500 AT715-2600 AT715-2800 AT715-3000

1200 (48") 1300 (52") 1400 (56") 1500 (60") 1600 (64") 1700 (68") 1800 (72") 2000 (80") 2200 (88") 2400 (96") 2500 (100") 2600 (104") 2800 (112") 3000 (120")

43

Measuring Equipment Coordinate Measuring Machines These coordinate measuring machines help determine spatial coordinates in 3 directions (X, Y and Z) on a workpiece surface to accurately capture the position and shape.

Mitutoyo offers a wide range of models and probes to suit your application.

Standard CNC CMM (Bridge Type)

5-Axis CNC CMM

Product Catalog E16026

• Suitable for automated measurements of small and medium sized workpieces. The line-up includes various models that can be installed in temperature-controlled rooms and next to production lines.

• Versatile CNC coordinate measuring machines providing highaccuracy, high-speed, and high-acceleration measurements.

Metric

Product Catalog E16015

• A 5-Axis CNC CMM is also available for efficient measurement of workpieces that have complex shapes with free‑form surfaces.

• A versatile CNC coordinate measuring machine equipped with REVO-2, a 5-axis control-scanning probe head.

Metric Code No.

CRYSTA-Apex V500/700/900

Code No.

Length Measurement Accuracy E0,MPE: 1.7 + 3L/1000 μm*

CRYSTA-Apex EX 1200R

(L: Measuring length in mm)

(L: Measuring length in mm)

High-Accuracy CNC CMM

High-Accuracy CNC CMM

Product catalog E16001

• High-accuracy CNC coordinate measuring machines with a first term accuracy specification of 0.7 μm.

Metric

Length Measurement Accuracy E0,MPE: 2.9 + 4L/1000 μm*

Product catalog E16035

• Offers both high performance and cost-effective measurements.

Metric Code No.

Length Measurement Accuracy

Code No.

STRATO-Apex 500/700/900

E0,MPE: 0.7 + 2.5L/1000 μm*

STRATO-Active

(L: Measuring length in mm)

Length Measurement Accuracy E0,MPE: 1.2 + 3L/1000 μm*

(L: Measuring length in mm) * Specifications vary by configuration, size and thermal environment.

44

Measuring Equipment Coordinate Measuring Machines These coordinate measuring machines help determine spatial coordinates in 3 directions (X, Y and Z) on a workpiece surface to accurately capture the position and shape.

Mitutoyo offers a wide range of models and probes to suit your application.

Shop-Floor Type CNC CMM

In-Line Type CNC CMM

Product Catalog E16028

Product Catalog E16010

Video

• The machines can be installed in-line or next to a production line to detect nonconforming products early on. They can reduce risks in the manufacturing process and improve productivity.

• Designed for use on any size shop floor.

Metric

• The machines can be installed in-line or next to a production line to detect nonconforming products early on. They can reduce risks in the manufacturing process and improve productivity.

• The CNC coordinate measuring machine for in-line use provides high acceleration and high-speed movement to enable high-throughput measurements.

Metric

Code No.

Length Measurement Accuracy

MiSTAR 555

E0,MPE: 2.2 + 3L/1000 μm*

Code No.

Length Measurement Accuracy

MACH-V 9106

E0,MPE: 2.5 + 3.5L/1000 μm*

(L: Measuring length in mm)

(L: Measuring length in mm)

In-Line, Horizontal CNC CMM

Compact In-Line CNC CMM

Product Catalog E16010

Product Catalog E16010

• A horizontal CNC coordinate measuring machine for in-line use that can not only save space but also increase throughput with high acceleration, high-speed movement, and high-speed measurement. An optional index table allows more flexible measurements.

• A standalone CNC CMM measuring head can also be integrated with a single- or multi-axis machine to create a system to measure larger workpieces.

Metric

Metric Code No.

Length Measurement Accuracy

Code No.

Length Measurement Accuracy

MACH-3A 653

E0,MPE: 2.2 + 3.5L/1000 μm*

MACH Ko-ga-me

E0,MPE: 2.4 + 5.7L/1000 μm*

(L: Measuring length in mm)

(L: Measuring length in mm)

* Specifications vary by configuration, size and thermal environment.

45

Measuring Equipment Vision Measuring Systems • Our vision measuring systems can provide a wide range of measurements in a single system.

• We have a comprehensive line-up to meet various needs.

Vision Measuring System Equipped with Colour Camera and Zoom

Standard CNC Vision Measuring System

Product Catalog E14022

Product Catalog E14028

Video

• Vision measuring systems with high functionality and operability make it possible to perform non-contact measurement of various workpieces.

Metric

• A CNC vision measuring system with newly developed illumination and control technology for high-speed, high‑accuracy measurement.

Metric

Code No.

Unidirectional Accuracy

Code No.

QV Active

E1x/E1Y: 2 + 3L/1000 μm

QV APEX Pro

Ultra-High Accuracy CNC Vision Measuring System

Unidirectional Accuracy EUX/EUY, MPE: 1.5 + 3L/1000 μm

High-Accuracy CNC Vision Measuring System

Product Catalog E14002

• An ultra-high accuracy CNC vision measuring system with a first term accuracy of EUX/EUY, MPE is 0.35 μm that is enabled by adopting a highly rigid structure and eliminating error factors.

Product Catalog E14028

• The QV HYPER Pro is a highly accurate model that is equipped with a high-resolution / high-accuracy scale.

Metric

Metric Code No.

Unidirectional Accuracy

QV ULTRA

EUX/EUY, MPE: 0.35 + 1.3L/1000 μm

46

Code No. QV HYPER Pro

Unidirectional Accuracy EUX/EUY, MPE: 0.8 + 2L/1000 μm

Measuring Equipment Optical Measuring Instruments • A wide variety of optical measuring instruments with in-house-developed lenses, the “eyes” of optical measuring instruments, are available to respond to various measuring applications.

• The projectors display a workpiece image magnified at an accurate ratio on a screen to improve efficiency of measurement, inspection, and observation. They can be installed in various locations such as inspection laboratories and manufacturing and processing sites.

High-Accuracy Profile Projector

Profile Projector

Product Catalog E14005

• A high-end model in the PJ Series that can provide a clear and sharp projected image.

Metric

Product Catalog E14005

• A profile projector with highly durable, energy-efficient LED illumination and a built-in counter.

Metric

Code No.

Screen Effective Diameter

Projected Image

Illumination

Code No.

Screen Effective Diameter

Projected Image

Illumination

PJ-H30

306 mm

Erect

-

PJ-PLUS

315 mm

Inverted-reversed

White LED

Profile Projector

Profile Projector

Product Catalog E14005

• Equipped with a large 500 mm screen.

• Projected images can be easily traced or compared with a template.

Metric

Product Catalog E14005

• A profile projector suitable for measurement and observation of an end mill, cutter, circular saw, etc. of cutting tools.

Metric

Code No.

Screen Effective Diameter

Projected Image

Illumination

Code No.

Screen Effective Diameter

Projected Image

Illumination

PV-5110

508 mm

Inverted-reversed

-

PH-3515F

353 mm

Erect-reversed

-

47

Notes

48