Chapter 4: Health matters
Chapter 4: Health matters
When and how to use these pages: Check your progress, Worked example and End of chapter test
Percentage Total marks Most demanding [Higher Tier]
Q. 17 (A02) 6 marks
Check your progress can be used for individual or class revision using any combination of the suggestions below: More Challenging [Higher Tier]
Q. 13 (A02) 2 marks Q. 12 (A02) 4 marks Q. 11 (A02) 4 marks
Worked example
Q. 10 (A01) 2 marks
The worked example talks students through a series of exam-style questions. Sample student answers are provided, which are annotated to show how they could be improved.
Going Further [Foundation and Higher Tiers]
Give students the Worked example worksheet (Teacher Pack CD). The annotation boxes on this are blank. Ask students to discuss and write their own improvements before reviewing the annotated Worked example in the Student Book. This can be done as an individual, group or class activity.
Q. 8 (A01) 1 mark Q. 7 (A02) 1 mark
Q. 9 (A01) 1 mark
Q. 14 (A01) 1 mark
Ask students to construct a mind map linking the points in Check your progress Work through Check your progress as a class and note the points that need further discussion Ask the students to tick the boxes on the Check your progress worksheet (Teacher Pack CD). Any points they have not been confident to tick they should revisit in the Student Book. Ask students to do further research on the different points listed in Check your progress Students work in pairs and ask each other what points they think they can do and why they think they can do those, and not others
Q. 15 (A02) 1 mark
Q. 16 (A01) 2 marks
Q. 18 (A02) 2 marks
Check your progress is a summary of what students should know and be able to do when they have completed the chapter. Check your progress is organised in three columns to show how ideas and skills progress in sophistication. Students aiming for top grades need to have mastered all the skills and ideas articulated in the final column (shaded pink in the Student book).
Q. 19 (A03) 6 marks
Check your progress
End of chapter test
Getting Started [Foundation Tier]
Student Name
Q. 1 (A01) 1 mark
© HarperCollinsPublishers Limited 2016
Q. 2 (A01) 1 mark
137
Q. 3 (A01) 2 marks
AQA GCSE Biology: Trilogy: Teacher Pack
Q. 4 (A01) 1 mark
Questions could be used as a test once you have completed the chapter Questions could be worked through as part of a revision lesson Ask Students to mark each other’s work and then talk through the mark scheme provided As a class, make a list of questions that most students did not get right. Work through these as a class.
Q. 5 (AO1) 1 mark
Marking Grid for End of Chapter 4 Test
Q. 6 (A02) 1 mark
The End of chapter test gives students the opportunity to practice answering the different types of questions that they will encounter in their final exams. You can use the Marking grid provided in this Teacher Pack or on the CD Rom to analyse results. This shows the Assessment Objective for each question, so you can review trends and see individual student and class performance in answering questions for the different Assessment Objectives and to highlight areas for improvement.
AQA GCSE Biology: Trilogy: Teacher Pack
138
© HarperCollinsPublishers Limited 2016
Chapter 5: Coordination and control
Chapter 5: Coordination and control
Lesson 5: The endocrine system
Consolidate and apply • Ask students to complete section 3 of their worksheet, where they should match the scenarios given to the hormones that are most likely to be involved. [O1, O2]
Lesson overview
• Students should work in small groups. They should use one of the scenarios and produce a poster to explain how the signals are picked up, and how the pituitary gland controls the release of the perspective hormone. They should explain what impact the hormone has on the body. [O1, O2, O3]
AQA specification reference AQA 4.5.3.1
Learning objectives • Recall that the endocrine system is made up of glands that secrete hormones into the blood. • Know the location of the major endocrine glands.
Extend Ask students who are able to progress further, to: • find out more about the role of human growth hormone and how it is used today. They could discover why people with large amounts of growth hormone do not live very long. [O1, O2]
• Understand why the pituitary gland is the ‘master gland’.
Learning outcomes
Plenary suggestions
• Describe the endocrine system. [O1] • Explain the function of the major endocrine glands and their hormones. [O2] • Explain how the endocrine system works to bring about changes to the body. [O3]
Skills development • WS 3.5 Interpret observations and other data (presented in verbal, diagrammatic, graphical, symbolic or numerical form), including identifying patterns and trends, making inferences and drawing conclusions. • WS 3.8 Communicate the scientific rationale for investigations, methods used, findings and reasoned conclusions through written and electronic reports and presentations using verbal, diagrammatic, graphical, numerical and symbolic forms.
Play ‘What am I?’ Think of a part of the endocrine system, without telling students. Ask them to think of ‘yes’ or ‘no’ questions. Students must guess the part using the fewest number of questions. Students write their own ‘true’ or ‘false’ statements about the endocrine system, and test the class. [O1, O2, O3]
Answers to Worksheets 5.5.1 and 5.5.2 1 Roles of the endocrine glands and their hormones Name of gland
Name of hormone(s) produced
pituitary
growth hormone, prolactin, TSH, ACTH, oxytocin
• WS 4.1 Use scientific vocabulary, terminology and definitions.
thyroid
thyroxine
Resources needed Video of endocrine glands from Medline Plus at www.nlm.nih.gov; poster paper; Internet access; Worksheet 5.5.1 (low and standard demand); Worksheet 5.5.2 (high demand)
pancreas
insulin, glucagon (‘glucagon’ high demand only: Worksheet 5.5.2)
adrenal
adrenaline, corticosteroids
ovary
oestrogen, progesterone
testes
testosterone
Digital resources Student access to PowerPoint Key vocabulary endocrine gland, endocrine system, hormone
Teaching and learning Engage • Show students the image of Robert Pershing Wadlow in Figure 5.12 on page 166 of the Student Book. Discuss why he grew so tall and died so young. Introduce the idea that hormones are chemicals produced by different organs that have a profound effect on our body. Ask students to list any hormones they have heard of and what their roles might be. [O1]
Challenge and develop • Show students the video about endocrine glands from www.nlm.nih.gov, which introduces the endocrine system and its control. Discuss how the pituitary gland acts as the ‘master gland’. Ask students to think of an analogy to compare the role of the pituitary with the other endocrine glands. [O1, O2] • Ask students to work in small groups and use the Internet to research the main endocrine glands, their hormones and the effects on the body. Students should complete section 1 of Worksheet 5.5.1 (low and standard demand) and Worksheet 5.5.2 (high demand). [O1, O2] • Ask students to use the information they have collected and produce a PowerPoint presentation on the endocrine system. They should explain the role of the main endocrine organs: pituitary, thyroid, adrenal gland, pancreas, ovary and testes. [O1, O2, O3]
Explain • Ask low and standard demand students to annotate the diagram of the endocrine system in section 2 of Worksheet 5.5.1 and explain the roles of all the main hormones, and how this is brought about. • High demand students (Worksheet 5.5.2) should compare the length of time over which each hormone is likely to act, and rank each hormone according to how much it affects the body. [O1, O2, O3] AQA GCSE Biology: Trilogy: Teacher Pack
151
© HarperCollinsPublishers Limited 2016
Name of hormone
Effects on the body
growth hormone
stimulates growth of cells and tissues
thyroxine
regulates the rate of metabolism
insulin
reduces the levels of glucose in the blood
glucagon
increases the levels of glucose in the blood (high demand only: Worksheet 5.5.2)
adrenaline
increases heart rate, breathing rate, affects the release of insulin and glucagon, prepares the body for emergency action
oestrogen and progesterone
control the menstrual cycle,pregnancy, puberty and secondary female characteristics
testosterone
controls puberty and secondary male characteristics
2 Where are the endocrine glands? Diagram annotated as per Figure 5.13 on page 166 in the Student Book. High demand (Worksheet 5.5.2): Hormones likely to have a very longterm effect – oestrogen, progesterone, testosterone, growth hormone; hormones likely to have a more immediate effect (days or weeks) – insulin, glucagon, thyroxine; hormones likely to have a very quick response – adrenaline; most profound effects on the body – oestrogen, progesterone, testosterone, growth hormone; weaker effects – adrenaline, insulin, glucoagon, thyroxine 3 When do hormones act? (only high demand need mention glucagon) 1. insulin, (glucagon), thyroxine, pituitary 2. thyroxine, insulin, (glucagon), pituitary 3. oestrogen, progesterone, testosterone 4. adrenaline, thyroxine, pituitary, insulin, (glucagon) 5. pituitary, thryoxine, insulin, (and glucagon) 6. adrenaline, pituitary, thyroxine, insulin, (glucagon)
AQA GCSE Biology: Trilogy: Teacher Pack
152
© HarperCollinsPublishers Limited 2016
Chapter 1: Atomic structure and the periodic table
1
Chapter 1: Atomic structure and the periodic table
Atomic structure and the periodic table: Introduction
When and how to use these pages
Lesson title
Overarching objectives
This chapter builds on the idea that the atom is the building block of matter – it underpins a lot of work in Chemistry.
1
Elements and compounds
Use chemical symbols and formulae to describe elements and compounds.
Overview of the chapter
2
Atoms, formulae and equations
Know that the atoms in an element are all the same and use symbols and formulae to represent elements and compounds and simple chemical reactions.
3
Mixtures
Understand how different techniques are used to separate mixtures.
4
Changing ideas about atoms
Describe how ideas about atoms changed as new evidence became available.
5
Modelling the atom
Model atoms as positive nuclei surrounded by negative electrons.
6
Relating charges and masses
Describe the similarities and differences between protons, neutrons and electrons.
7
Sub-atomic particles
Use atomic numbers and mass numbers to determine the numbers of sub-atomic particles in atoms.
8
Electronic structure
Describe the arrangement of electrons in shells or energy levels.
9
The periodic table
Describe the link between electronic structure and an element’s position in the periodic table.
10
Developing the periodic table
Describe how Mendeleev developed the periodic table.
11
Comparing metals and nonmetals
Describe the physical and chemical differences between metals and nonmetals.
12
Metals and non-metals
Distinguish metals from non-metals using their position in the periodic table and ability to form positive ions.
13
Key concept: The outer electrons
Understand how outer electrons can be transferred or shared.
14
Exploring Group 0
Explain their lack of reactivity and trends in their physical properties.
15
Exploring Group 1
Describe their high reactivity and trends in their chemical properties.
16
Exploring Group 7
Describe their high reactivity and trends in their physical and chemical properties.
17
Reaction trends and prediction reactions
Explain trends in reactivity in Groups 1 and 7 and changes across a period.
18
Maths skills: Standard form and making estimates
Recognise and use standard form in calculations.
Students will learn about the structure of atoms and use a range of different models to describe both the atoms themselves and the physical and chemical properties of the elements and compounds they form. Students will also explore how atomic models developed as new data became available, and how the periodic table was constructed. In the process, they will learn how testing predictions can support or refute new scientific ideas. Students will carry out experiments, describe practical procedures, select techniques for a particular purpose and explain their choices. They will also make and record observations, describe patterns in data and use data to make predictions. The chapter offers various opportunities for students to use Mathematics. They visualise and represent 2D and 3D forms, including 2D representations of 3D objects; they use ratios to write simple formulae; substitute numerical values into chemical equations to balance them; use prefixes and powers of 10 to describe the sizes of atoms and their components; translate data between graphical and numerical form, plot variables from data to describe trends and relationships; recognise and use expressions in standard form; interpret tables, diagrams and graphs to make predictions.
Obstacles to learning Atoms and their sizes are abstract concepts and are hard to visualise. The use of models and analogies may help some students to recognise that atoms are very small, that most of their volume is made up of empty space and that they bond together to make 3D structures. The use of physical models and diagrams will also help students to classify substances as elements, compounds and mixtures, their particles as atoms, ions or molecules, and their structures as atomic, molecular or crystalline. Particle pictures and physical models will also help students who struggle to use ratios to determine formulae and to balance chemical equations.
Practicals in this chapter In this chapter, students will do the following practical work: • Observe a demonstration to make a compound from two elements. • Burn strips of magnesium ribbon and observe the traces of magnesium oxide produced. • Separate a mixture of copper powder and sodium chloride using filtration and evaporation. • Explore the structure of atoms using a 3D model. • Compare the pH values of solutions of both metal oxides and non-metal oxides. • Make space-filling models of the molecules in a selection of elements and compounds. • Model the electron arrangements in atoms. • Model the arrangement of elements in the periodic table. • Test a range of metal and non-metal oxides in water with universal indicator solution. • Observe demonstration to show the appearance of the halogens, emphasise the hazards associated with these elements and show how they form salts. • Observe displacement reactions to show the trend in the reactivity of Group 7 elements. • Model the changes in electron arrangements when atoms react to form ions. • Consider the usefulness of numbers written in standard form. AQA GCSE Chemistry: Trilogy: Teacher Pack
1
© HarperCollinsPublishers Limited 2016
AQA GCSE Chemistry: Trilogy: Teacher Pack
2
© HarperCollinsPublishers Limited 2016
Chapter 1: Atomic structure and the periodic table
Lesson 7: Sub-atomic particles
Chapter 1: Atomic structure and the periodic table
• Low demand: Ask students to read ‘Isotopes’ from section 1.7 in the Student Book (page 27), then write the formula of each isotope of hydrogen, and draw a diagram of its atom. [O2, O3]
Lesson overview
• Standard demand: Ask student to read ‘Isotopes’ from section 1.7 in the Student Book (page 27) and answer questions 3–5. [O2, O3]
AQA Specification reference AQA 5.1.1.5; 5.1.1.6
• High demand: Students should use the ‘Isotopes’ section of Worksheet 1.7.2 to practise using symbols to represent isotopes. [O3]
Learning objectives •
Use the definition of atomic number and mass number.
•
Calculate the numbers of protons, neutrons and electrons in atoms.
•
Calculate the numbers of sub-atomic particles in isotopes and ions.
Extend Ask students who are able to progress further, to consider that some elements have only radioactive isotopes. They should find out which elements these are.
Learning outcomes • Use atomic numbers and mass numbers to find the number of sub-atomic particles in an atom. [O1] • Explain what isotopes are and how they differ. [O2]
Plenary suggestion Ask students to write down three things that they know about atoms, and then move into groups to compile a master list with the most important at the top. The most important one can then be shared with the class.
• Use symbols to represent isotopes. [O3]
Answers to Worksheet 1.7.1
Skills development • WS 1.2 Use models in explanations. • WS 1.2 Recognise, draw and interpret diagrams. • WS 4.1 Use scientific definitions. Resources needed Periodic tables; Worksheets 1.7.1 (low and standard demand); Worksheet 1.7.2 (high demand) Digital resources PowerPoint Presentation 1.7 ‘Isotopes’ Key vocabulary atomic mass, isotope, neutrons, protons
Teaching and learning Engage • Display slide 1 of PowerPoint Presentation 1.7 ‘Isotopes’ to prompt pairs to discuss what they know about atoms and isotopes. Slides 2–4 can be used to clarify student’s ideas. [O2]
Challenge and develop • Display slide 5 of PowerPoint Presentation 1.7 ‘Isotopes’ and demonstrate how to calculate numbers of neutrons from mass and atomic numbers. [O1] • Use a video clip to review how to use atomic numbers and mass numbers to find the number of sub-atomic particles in an atom. Google search string: BBC Bitesize – GCSE chemistry – How mass and atomic numbers explain atomic structure. (Avoid the isotopes video in the same series because its description of isotopes could cause misconceptions.) [O1]
Atom
Symbol
Hydrogen Helium Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon Sodium Magnesium Aluminium Silicon Phosphorus Sulfur Chlorine Argon Potassium Calcium
H He Li Be B C N O F Ne Na Mg Al Si P S Cl Ar K Ca
Mass number 1 4 7 9 11 12 14 16 19 20 23 24 27 28 31 32 35 40 39 40
Atomic number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Neutrons 0 2 4 5 6 6 7 8 10 10 12 12 14 14 16 16 18 22 20 20
Explain
Answers to Worksheet 1.7.2
• Low and standard demand: Students should use Worksheet 1.7.1 to calculate the number of neutrons in atoms. [O1]
Neutrons: 1. Li, Be, B, F, Na, Al, P, Cl, Ar, K Isotopes: 1.
• High demand: Students should use the ‘Neutrons’ section of Worksheet 1.7.2 to compare the neutron:proton ratio in a range of atoms. [O1]
2. Carbon-12 has six protons, six electrons, six neutrons Carbon-13 has six protons, six electrons, seven neutrons Carbon-14 has six protons, six electrons, eight neutrons
2. Only H
Consolidate and apply • Display slide 5 of PowerPoint Presentation 1.7 ‘Isotopes’ and introduce the term ‘isotopes’ to describe atoms of the same element with different numbers of neutrons. [O2]
AQA GCSE Chemistry: Trilogy: Teacher Pack
15
© HarperCollinsPublishers Limited 2016
AQA GCSE Chemistry: Trilogy: Teacher Pack
16
© HarperCollinsPublishers Limited 2016
Chapter 2: Electricity
Chapter 2: Electricity
Check your progress
Worked example
you should be able to:
The diagram below shows a circuit used to investigate the resistance of a piece of thin wire.
■ Recall that an electric current is a flow of electrical charge and is measured in amperes (A)
■ Remember that charge ➞
■ Recognise and use electric circuit symbols in circuit diagrams
■ Set up a circuit to investigate the relationship between V, I and R for a fixed resistor
■ State the main properties of a diode, a thermistor and a light-dependent resistor (LDR)
➞
➞
➞
➞
➞
➞
■ Understand that everyday electrical appliances bring about energy transfer
■ Draw I–V graphs for a fixed resistor
series circuit is always the same and that the total current in a parallel circuit is the sum of the currents through each branch
A
■ Describe the behaviour of a thermistor and LDR in terms of changes to their resistance components using I–V graphs
in the UK is 230 V a.c. and 50 Hz
➞
➞
➞
thin wire
more resistors to series and parallel circuits
■ Analyse and interpret I–V
➞
AQA GCSE Physics: Trilogy: Teacher Pack
the characteristics of components are ohmic or non-ohmic
■ Describe how step-up and
■ Explain why electrical power is
step-down transformers ➞ change the potential difference in the National Grid
transmitted at high voltages in the National Grid
■ Recall and apply the equation ➞
➞
68
any connection between the live wire and earth or our bodies
Give the purpose of component C.
To regulate the temperature. 3
direct and alternating potential difference
■ Explain the dangers of providing
dangerous even when a switch ➞ in the main circuit is open
P=V×I
2
■ Explain the difference between ➞
Name the three components in the circuit labeled A, B and C.
A is an ammeter, B is a voltmeter and C is a thermistor.
■ Use I–V graphs to determine if ➞
■ Recall and use the equation ➞
■ Describe applications of diodes, thermistors and LDRs and explain their uses
A and B are correct, but C is a variable resistor.
B
graphs for a fixed resistor
■ Explain why a live wire may be
energy transferred E = Pt
C
■ Explain the effect of adding
■ Recall and use the equation
■ Recall that power is measured in watts (W) and 1 kW = 1000 W
➞
■ Recall that domestic supply ➞
■ Recall that the National Grid is a system of cables and transformers linking power stations to consumers
■ Recall that the current in a
■ Explain the properties of ➞
■ Identify live, neutral and earth wires by their colour-coded insulation
V = IR and for series circuits Rtotal = R1 + R2
power pack
is the rate of flow of charge. Rearrange and apply the equation Q = It
1
■ Recall that cells and batteries produce low-voltage direct current
and parallel circuits. Compare the brightness of lamps connected in series and parallel
■ Recall and apply the equation
■ Draw I–V graphs for a filament lamp
■ Explain the concept that current ➞
■ Draw and recognise series
■ Recall that the current
through a component depends on the resistance of the component and the potential difference across it
is measured in coulombs (C) and recall and use the equation Q = It
The student recorded the potential difference across the thin wire and the current passing through it. She plotted her results on a graph. Explain which variable she should plot on each axis.
She should plot potential difference on the x-axis and current on the y-axis. 4
The student increased the potential different to 12 V. Explain what you think would have happened.
Component C is used to change the potential difference across the test material. This is correct, but the explanation has not been given. Potential difference is plotted on the x-axis because it is the independent variable, and current is plotted on the y-axis because it is the dependent variable.
The wire gets very hot. Explain how you would expect the graph to look if the wire had been replaced by a filament lamp.
The same
The wire gets hot because of the large current passing through it. Large currents transfer lots of energy.
energy transferred E = QV
The line would initially be straight but then curve with a shallower gradient as the temperature of the filament increases.
■ Recall2 and apply the equation P=IR
© HarperCollinsPublishers Limited 2016
AQA GCSE Physics: Trilogy: Teacher Pack
69
© HarperCollinsPublishers Limited 2016
Chapter 6: Waves
Chapter 6: Waves
Lesson 8: Reflection, refraction and wave fronts Lesson overview
Explain • Using the findings from the refraction investigation, ask the students what happened to the light ray as it entered the block and as it exited again.
• Ask students to draw particle diagrams for the air and the glass and ask students whether the light would
AQA Specification reference
speed up or slow down as it entered the block and as it left it again.
AQA 6.6.2.2
• Use these discussions to introduce a wave front diagram, perhaps for deep and shallow water, as shown in
Learning objectives • Explain reflection and refraction and how these may vary with wavelength. • Construct ray diagrams to illustrate refraction. • Use wave front diagrams to explain refraction in terms of the difference in velocity of the waves in different substances.
the student book. Be clear that the wave fronts get closer together if the wave is moving faster and spread out if the wave is moving slower. [O3]
Consolidate and apply • The students should now be issued with the Reflection, refraction and wave fronts worksheet suitable for their ability:
Learning outcomes • [O1] State the laws of reflection and refraction. • [O2] Draw ray diagrams to show reflection and refraction. • [O3] Interpret wave-front diagrams to state whether a wave is speeding up or slowing down as it passes through different media.
• Low demand: Worksheet 6.8.1 [O1] [O2] [O3] • Standard demand: Worksheet 6.8.2 [O1] [O2] [O3] • High demand: Worksheet 6.8.3 [O1] [O2] [O3] Extend
Skills development
• Ask students able to progress further to draw a wave front diagram for the refraction experiment done. [O3]
• Use a diagram to illustrate the behaviour of electromagnetic waves
• Alternatively, they could be asked to use the ideas they have met during the lesson to return to the original
Maths focus
question of what causes a mirage and improve the answer they gave at the start of the lesson.
• Measure angles using a protractor. Resources needed ray boxes, power packs, slit cards, Perspex blocks, plane mirrors, protractors; Worksheet 6.8.1, Worksheet 6.8.2, Worksheet 6.8.3, Practical sheet 6.8, Technician notes 6.8 Digital resources image of a mirage Key vocabulary reflection, transmission, absorption, refraction, ray diagram, wave front
Plenary suggestions Heads and tails: Ask each student to write a question about something from the lesson on a coloured strip of paper and the answer on another colour. In groups of six to eight, hand out the strips so that each student gets a question and an answer. One student reads out his or her question. The student with the right answer then reads it out, followed by his or her question, and so on. Hot seat: Ask each student to think up a question, using material from the lesson. Select someone to put in the hot seat. Ask students to ask their question and say at the end whether the answer is correct or incorrect.
Teaching and learning Engage
Ideas hothouse: Ask students to work in pairs to list points about what they know about electromagnetic waves so far. Then ask the pairs to join together into fours and then six to eights to discuss this further and to come up with an agreed list of points. Ask one person from each group to report back to the class.
• Show students an image of a mirage on a hot road or in a desert. • Pair talk: ask students to discuss what they think causes the mirage. • Pairs to fours: ask the pairs to join up into fours and to share their ideas, before preparing their best group answer, using no more than 15 words.
Answers to questions Worksheets 6.8.1, 6.8.2, 6.8.3
Challenge and develop
1. a)
b)
• Remind students that visible light is one group in the electromagnetic spectrum and that, because we can see visible light, we can study it and then apply the findings to the rest of the electromagnetic spectrum. In other words, the behaviour of light waves can tell us how the other waves in the electromagnetic spectrum will behave.
• Using Practical sheet 6.8, students remind themselves of the laws of reflection and refraction. [O1] [O2] • The students could be put into pairs, where one of the pair investigates reflection and the other investigates refraction, before coming back to share their results. [O1] [O2]
• Alternatively, students could carry out both practical investigations for themselves. If practical equipment is
2.
limited, the class could be split in half and each half could begin with one of the two investigations, before swapping over halfway through the time. [O1] [O2]
AQA GCSE Physics: Trilogy: Teacher Pack
174
© HarperCollinsPublishers Limited 2016
AQA GCSE Physics: Trilogy: Teacher Pack
175
© HarperCollinsPublishers Limited 2016