2017 Scholarly Productivity Report

2017

Scholarly Productivity Report Civil, Architectural and Environmental Engineering

care.mst.edu 2017 Scholarly Productivity Report -- 1

FROM THE CHAIR

Joel G. Burken Ph.D., P.E., BCEE, F.AEESP

In this edition of the Department of Civil, Architectural and Environmental Engineering Scholarly Productivity Report, we are excited to share our 2017 activities. The year was a step forward in working toward completing plans that were introduced in our Vision 2020 Plan in 2011. We enjoyed increased productivity in most aspects of our scholarly work and are thrilled to share that progress with you herein.

Most of all, we were excited to welcome three new team members (listed below) to the department, and we look for them to lead us into new research and educational areas.

• Dr. Magdy Abdelrahman joined us as the Missouri Asphalt Pavement Association (MAPA) Professor. Dr. Abdelrahman had been a professor of civil engineering at North Dakota State University, and he previously received a National Science Foundation (NSF) CAREER Award for research and new courses in infrastructure sustainability.

• Dr. Jenny Liu also joined Missouri S&T as part of the campuswide signature area hire in Advanced Materials for Sustainable Infrastructure. Dr. Liu joins us from the University of Alaska Fairbanks, where she was a professor in civil and environmental engineering. She also served as the director of the USDOT University Transportation Center (UTC), Center for Environmentally Sustainable Transportation in Cold Climates (CESTiCC).

• Dr. XianBiao “XB” Hu was also welcomed as a new assistant professor and as part of the campuswide signature area hire in Smart Living. He earned a Ph.D. at the University of Arizona, where he served as affiliate professor, and he also served as research and development director of Metropia Inc., prior to joining our team at S&T. Dr. Hu’s research interests include the design and development of smart transportation systems, driving safety and insurance telematics, and energy-saving oriented travel behavior.

SAVE THE DATE: OCTOBER 12-13, 2018 Homecoming Weekend and ACML Groundbreaking 2 -- 2017 Scholarly Productivity Report

INSPIRE

Kick-off event Along with these new members of the team, we celebrated a strong year of production, with a listing of over 130 peer-reviewed journal articles for our faculty and students (page 7), as well as many notable international keynote talks and presentations (page 19). The CArEE faculty also marked a solid year of new research projects, notably the new USDOT University Transportation Center, Inspecting and Preserving Infrastructure through Robotic Exploration “INSPIRE” that will run for five years and include new automated infrastructure nondestructive testing methods (page 27). Many national and international awards were also bestowed upon our faculty, ranging from notable research breakthroughs to recognition of career for accomplishments in teaching, service and research (page 29).

The team of faculty, staff and students in the CArEE department celebrated an excellent year. In particular, we moved forward on the new building expansion of the Advanced Construction and Materials Laboratory (ACML), beginning the design process with the ground breaking to be scheduled for fall 2018 (back cover).

The construction project of $6.5 million links many of the faculty hires and ongoing research efforts highlighted in this report.

With all the experience and talents of our new faculty, the increased facilities capabilities in place or pending, and the current funding of projects commencing in 2018, we look to continue the current direction for advancing our research and educational programs. Our talented team and our research and educational facilities will undoubtedly create greater opportunities for our graduates to go out and “change the world” in their career as Missouri S&T alumni.

If you have any questions about the exciting things happening in Rolla and our future vision of civil, architectural and environmental engineering at S&T, please contact me and take any opportunity to stay engaged with our team.

Sincerely, Joel G. Burken Chair and Curators’ Distinguished Professor

CHAIR & ASSISTANT CHAIRS

Joel Burken

Stuart Baur

Education: Ph.D. Civil and Environmental Engineering, University of Iowa Research Interests: Phytoforensics, Phytoremediation and natural treatment systems, Biological wastewater treatment, Constructed wetlands, Green remediation

Education: Ph.D. Civil Engineering, Missouri S&T Research Interests: Design cost effective clean alternative energy, Develop new building technologies and practices through the use of materials and methodology, Generate intelligent responsive building systems

Ph.D., P.E., BCEE, F.AEESP Department Chair and Curators’ Distinguished Professor, Civil, Architectural and Environmental Engineering

Ph.D., A.I.A. Assistant Chair and Associate Professor, Architectural Engineering

GRADUATE PROGRAMS & ADVISING

Mark Fitch

Ph.D. Assistant Chair and Associate Professor, Environmental Engineering

Education: Ph.D. Chemical Engineering, University of Texas at Austin Research Interests: Constructed wetlands/ Biochemical reactors for metals removal, Biofiltration/Membrane biofiltration, Nutrient uptake in streams

Eric Showalter

Ph.D., P.E. Assistant Chair and Associate Teaching Professor, Civil Engineering Director, Advising Center Education: Ph.D. Civil Engineering, Purdue University Research and Teaching Interests: Information technology applications in construction, Environmental remediation, Productivity simulation, Cost effectiveness of technology

LIKE

OUR FACEBOOK PAGE www.facebook.com/MissouriSandTCArE Cesar Mendoza

Ph.D. Associate Professor, Water Resources Engineering Associate Chair, Graduate Studies and Advising Education: Ph.D. Civil Engineering, Colorado State University Research Interests: Hydraulics, Hydrology, Fluid mechanics, Sediment transport, Stream mechanics, Environmental hydraulics, Mathematical modeling

William Schonberg

Ph.D., P.E., F.ASCE, F.ASME, Assoc F.AIAA Professor, Civil, Architectural and Environmental Engineering Assistant Chair, Distance Education and Advising

Education: Ph.D. Civil Engineering, Northwestern University Research Interests: Armor/anti-armor and penetration mechanics, Spacecraft vulnerability/survivability, Spacecraft shielding against meteoroid and orbital debris impacts, Hypervelocity impact phenomena, Building collapse/ rubble modeling

Current news, events, photos, contests, connections and more!

2017 Scholarly Productivity Report -- 3

CArE ENGINEERING FACULTY

Daniel Abbott

Lecturer, Mechanics

Education: M.S. Mechanical Engineering, Missouri S&T Courses Taught: Engineering Mechanics: Statics, Materials Testing, Introduction to Engineering Design

Mohamed ElGawady Ph.D. Associate Professor and Benavides Faculty Scholar, Structural Engineering

Education: Ph.D. Structural Engineering, EPFL, Swiss Federal Institute of Technology, Lausanne, Switzerland Research Interests: Seismic behavior of unreinforced masonry (URM) structures, Application of Fiber Reinforced Polymers (FRP) in strengthening and repair of masonry/reinforced concrete structures, Seismic behavior of reinforced concrete bridges

4 -- 2017 Scholarly Productivity Report

Magdy Abdelrahman

Ph.D., P.E. Missouri Asphalt Pavement Association (MAPA) Endowed Professor

Education: Ph.D. Civil Engineering, University of Illinois at Urbana-Champaign Research Interests: Infrastructure sustainability and recycling of asphalt pavement, Modified asphalt binders, Quality control/assurance, Road materials and construction, Design and characterization of asphalt binders and mixtures, Pavement design and analysis, Advanced materials characterization and modeling, and Environmental aspects of road material recycling

Dimitri Feys

Ph.D. Assistant Professor, Materials Engineering

Education: Ph.D. Civil Engineering, Ghent University, Ghent, Belgium Research Interests: Behavior of highly workable concrete in the fresh state, Rheology of complex materials and suspensions, Suspension flow and sedimentation, Fluid mechanics and flow modeling, Concrete made with recycled materials and advanced sustainability

Genda Chen

Wen Deng

Ph.D., P.E., F.ASCE Robert W. Abbett Distinguished Professor, Civil Engineering

Ph.D. Assistant Professor, Geotechnical Engineering

William Gillis

XianBiao Hu

Education: Ph.D. Civil Engineering, State University of New York at Buffalo Research Interests: Structural health monitoring, Interface mechanics and deterioration of composite structures, Adaptive passive dampers and systems, Multihazards assessment and mitigation, Forensic study, Seismic analysis and retrofit, Soil-structure interaction, Bridge engineering

Ph.D., P.E., PMP, LEED AP, M.ASCE, M.ASHRAE Assistant Teaching Professor, Civil and Architectural Engineering

Education: Ph.D. Engineering Management, Missouri S&T Research and Teaching Interests: Building systems and system efficiency, Green building design and construction, Building commissioning, Indoor air quality

Education: Ph.D. Geosciences, Iowa State University Research Interests: Multiphase flow, Chemical and thermal transport, Microbial growth in porous and fractured media, Areas of geo-energy recovery, Waste sequestration, Environmental remediation

Ph.D. Assistant Professor, Transportation Engineering

Education: Ph.D. Transportation Engineering, University of Arizona Research Interests: Smart transportation systems design, development and deployment, Big data analytics and applications in transportation engineering, Incentive-based travel behavior research, Transportation system modeling and simulation, Driving safety and insurance telematics, Performance evaluation and traffic operation

Kamal Khayat

Ph.D., P.E., F.ACI, F.RILEM Vernon and Maralee Jones Professor, Materials Engineering Director, Center for Infrastructure Engineering Studies

Education: Ph.D. Civil Engineering, University of California, Berkeley Research Interests: Design and performance of advanced structural materials, including high-performance concrete with adapted rheology, self-consolidating concrete, Repair and rehabilitation of civil engineering infrastructure, Durability and deterioration of cement-based materials in aggressive environments

John Myers

Ph.D., P.E., F.ACI, F.ASCE, F.TMS Professor, Structural Engineering Associate Dean, College of Engineering and Computing Director, High-Bay Laboratory Education: Ph.D. Civil Engineering, University of Texas at Austin Research Interests: Structures/high performance concrete (HPC) behavior and durability performance, Fiber-reinforced polymers (FRP) in structural repair and strengthening applications with an emphasis related to concrete and masonry structures, and their durability performance

Nicolas Ali Libre

Ph.D. Assistant Teaching Professor, Structural Engineering

Education: Ph.D. Civil Engineering, University of Tehran, Iran Research and Teaching Interests: Computational mechanics and applied mathematics, Meshfree numerical methods for partial differential equations, Radial Basis Functions collocation method, Ill-conditioned systems of linear equations, Wavelet-based adaptive methods, Advanced cement-based materials for sustainable construction, Rheological and mechanical properties of fiber reinforced concrete, Non-destructive evaluation of concrete properties

Jenny Liu

Ph.D., P.E. Associate Professor, Materials and Pavement Engineering

Education: Ph.D. Civil Engineering, Texas A&M University Research Interests: Infrastructure Materials — Engineering characterization and modeling of asphalt cement, Hot-mix asphalt mixtures, Granular and stabilized bases, Portland cement concrete, and Other infrastructural materials, Pavement Engineering — Pavement design and testing, Pavement preservation, repair and rehabilitation, Non-destructive testing, Pavement construction, and Pavement management system (PMS)

Daniel Oerther

Lesley Sneed

Education: Ph.D. Environmental Engineering, University of Illinois Research Interests: Environmental biotechnology and sustainable development with a special emphasis on water, sanitation and hygiene (WaSH); Food safety, security and nutrition; and Poverty alleviation using design thinking and social entrepreneurship

Education: Ph.D. Civil Engineering, Purdue University Research Interests: Reinforced and prestressed concrete structural members and systems, Structural models and experimental methods, Innovative methods of repair and strengthening of structures subjected to seismic loading or other extreme hazards, Structural hazard mitigation, Design codes and construction specifications for structural concrete

Ph.D., P.E., BCEE, CEng, CEHS, D.AAS, M.CIEH, CEP, CEnv, F.AAN, F.RSA, F.RSPH Professor, Environmental Health Engineering

Ph.D., P.E., F.ACI Associate Professor and Stirrat Faculty Scholar, Structural Engineering

Hongyan Ma

Ph.D. Assistant Professor, Materials Engineering

Education: Ph.D. Civil Engineering, Hong Kong University of Science and Technology Research Interests: Hydration kinetics of (blended) cementitious materials, Microstructural characterization and modeling of cement paste, interfacial transition zone and mortar/concrete, Measuring and multi-scale modeling of transport properties of concrete, Mechanisms and properties of novel construction/rehabilitation materials, Magnesia-phosphate cement (MPC) and MPC-based functional materials

Jeffery Thomas

Ph.D., P.E. Associate Teaching Professor, Structural Engineering

Education: Ph.D. Engineering Mechanics, Missouri S&T Research and Teaching Interests: Engineering education, Mechanics of biological materials, Design of percussion instruments, Residential construction

2017 Scholarly Productivity Report -- 5

CArE ENGINEERING FACULTY

Jianmin Wang

Ph.D., P.E. Professor, Environmental Engineering

Education: Ph.D. Civil Engineering, University of Delaware Research Interests: Sustainable technologies for advanced wastewater treatment, Synergistic toxic effect of nanoparticles and heavy metals, Fate and transport of heavy metals in natural and engineered systems

Chenglin Wu

Ph.D. Assistant Professor, Structural Engineering

Education: Ph.D. Engineering Mechanics, The University of Texas at Austin Ph.D. Civil Engineering, Missouri S&T Research Interests: Multi-scale experimental mechanics and numerical modeling, Mechanics of adhesion and friction, Interfacial fracture mechanics, Composite materials, Microelectronic packaging, Nano indentation of thin films and micro-pillars, Seismic modeling in elastic/poroelastic media, Waveform inversion/optimization method, Vison-based structural health monitoring method

EMERITUS FACULTY Jerry Bayless

Associate Professor Emeritus

Franklin Cheng Professor Emeritus

Roger LaBoube

Professor Emeritus

6 -- 2017 Scholarly Productivity Report

Education: Ph.D. Civil Engineering, Texas A&M University Research Interests: Advanced testing techniques for geo-material characterization, Modeling of coupled hydrochemo-thermo-mechanical behavior of geo-materials, Numerical methods and modeling, Geothermal and ground source heat pump systems, Soil structure interaction, Foundation on expansive and collapsible soils, Geotechnical applications in pavement engineering, Frozen ground engineering, Remote sensing for geo-engineering applications

photo by Jesse Cureton/ Missouri S&T

Chancellor’s Professor and Associate Professor Emeritus

Jerome Westphal

Thomas Petry

Education: Ph.D. Engineering Mechanics, Harbin Institute of Technology, China Research Interests: Resilient infrastructural systems in multi-hazard environments, Structural health monitoring, Structural damage detection, Wireless sensor networks, Advanced signal processing, Nonlinear system identification and damage detection, Model updating of structural FEMs, Structural vibration control, Smart materials and structures

Ph.D., P.E. Associate Professor, Geotechnical Engineering

David Richardson

Rodney Lentz

Associate Professor Emeritus

Xiong Zhang

Professor Emeritus

Richard Stephenson

Charles Morris

Grace Yan

Ph.D. Assistant Professor, Structural Engineering

Shamsher Prakash

Curators’ Teaching Professor Emeritus

Associate Professor Emeritus

(CONTINUED)

Professor Emeritus

Professor Emeritus

Wei-Wen Yu

Curators’ Professor Emeritus

MR. MSM-UMR-S&T RETIRES It was the end of an era when Jerry Bayless, a faculty member at Missouri S&T (and MSM, and UMR) for more than half a century, retired in February 2017. The longtime instructor in civil engineering was celebrated during Homecoming. “There’s nobody who has made such an impact on our students in our almost 150 years of civil engineering education in Rolla,” says Dr. Joel Burken, Curators’ Distinguished Professor and chair of civil, architectural and environmental engineering. “He has influenced many, many students, helping those who are struggling to stay in school and see it through. That’s day to day, not just a special occasion. That’s who he is.”

JOURNAL PUBLICATIONS

Peer reviewed & indexed

Abdelrahman, M. Ragab, M., and Abdelrahman, M., “Enhancing the Crumb Rubber Modified Asphalt’s Storage Stability through the Control of its Internal Network Structure,” International Journal of Pavement Research and Technology.

DOI: doi.org/10.1016/j.ijprt.2017.08.003, 2017, https://www.sciencedirect.com/ science/article/pii/S1996681416302656.

Baur, S.W. Baur, S.W., and Stanley, R.J., “Missouri Project Lead the Way Survey Instructor Survey-based Assessments,” Transactions on Techniques for STEM Education, Vol. 2, No. 2, pp. 34-43. January-March, 2017.

Stanley, R.J., and Baur, S.W., “A Preliminary Academic Performance Assessment of Missouri University of Science and Technology Students with Project Lead the Way Course Experience,” Transactions on Techniques for STEM Education, Vol. 2, No. 2, pp. 21-33, 2017.

Burken, J.G. Maimaitijianga, M., Ghulama, A., Paheding, S., Hartling, S., Maimaitiyiming, M., Peterson, K., Shavers, E., Fishman, J., Peterson, J., Kadam, S., Burken, J.G., and Fritschi, F., “Unmanned Aerial System (UAS)-based Phenotyping of Soybean using Multi-sensor Data Fusion and Extreme Learning Machine,” ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 134, pp. 43-58, 2017. DOI: doi.org/10.1016/j.isprsjprs.2017.10.011.

Wilson J.L., Samaranayake, V.A., Limmer, M.A., and Burken, J.G., “Contaminant Gradients in Trees: Directional Tree Coring Reveals Boundaries of Soil and Soil-gas Contamination with Potential Applications in Vapor Intrusion Assessment,” Environmental Science & Technology, Vol. 51, No. 24, pp. 1405514064, 2017 DOI: 10.1021/acs.est.7b02667.

Doty, S.L., Freeman, J.L., Cohu, C.M., Burken, J.G., Firrincieli, A., Simon, A., Areen Khan, Z., Isebrands, J.G., Lukas, J., and Blaylock, M.J., “Enhanced Degradation of TCE on a Superfund Site using Endophyte-assisted Poplar Tree phytoremediation,” Environmental Science & Technology, Vol. 51, No. 17, pp. 10050-10058, 2017. DOI: 10.1021/ acs.est.7b01504.

Wilson J.L., Limmer, M.A., Samaranayake, V.A., Schumacher, J.G., and Burken, J.G., “Tree Sampling as a Method to Assess Vapor Intrusion Potential at a Site Characterized by VOC-Contaminated Groundwater and Soil,” Environmental Science & Technology, Vol. 51, No. 18, pp. 10369-10378, 2017, DOI: 10.1021/ acs.est.7b02667.

Chen, G. Li, X., Bao, Y., Wu, L., Yan, Q., Ma, H., Chen, G., and Zhang, H., “Thermal and Mechanical Properties of High-performance Fiber-reinforced Cementitious Composites after Exposure to High Temperatures,” Construction and Building Materials, Vol. 157, pp. 829-838, 2017, DOI: 10.1016/ j.conbuildmat.2017.09.125.

Chen, G., and Huang, Y., “A Hybrid Instrumented/Computational Modelling Framework with Lab-on-sensor Design and Calibration for Structural Behaviour Monitoring,” International Journal of Sustainable Materials and Structural Systems, 2017, http://www.inderscience. com/info/ingeneral/forthcoming. php?jcode=ijsmss.

Fan, L., Tang, F., Reis, S.T., Chen, G., and Koenigstein, M.L., “Corrosion Resistances of Steel Pipes Internally Coated with Enamel,” Corrosion, Vol. 73, No.11, pp. 1335-1345, 2017.

Bao, Y., Hoehler, M., Smith, C., Bundy, M., and Chen, G., “Temperature Measurement and Damage Detection in Concrete Beams Exposed to Fire Using PPP-BOTDA Based Fiber Optic Sensors," Smart Materials and Structures, Vol. 26, No. 10, 2017.

Li, X., Bao, Y., Xue, N., and Chen, G., “Bond Strength of Steel Bars Embedded in a High-performance Fiber-reinforced Cementitious Composite Before and After Exposure to Elevated Temperatures,” Fire Safety Journal, Vol. 92, pp. 98-106, 2017, DOI: 10.1016/j.firesaf.2017.06.006.

Chen, Y., Tang, F., Tang, Y., OKeefe, M., and Chen, G., “Mechanism and Sensitivity of Fe-C Coated Long Period Fiber Grating Sensors for Steel Corrosion Monitoring of RC Structures,” Corrosion Science, Vol. 127, pp. 70-81, 2017.

Bao, Y., Valipour, M., Meng, W., Khayat, K., and Chen, G., “Distributed Fiber Optic Sensor-enhanced Detection and Prediction of Shrinkage-induced Delamination of Ultra-high-performance Concrete Overlay," Smart Materials and Structures, Vol. 26, No. 8, 2017, https:// doi.org/10.1088/1361-665X/aa71f4.

Cheng, X., Brow, R., and Chen, G., “The Dissolution Behavior in Alkaline Solutions of a Borosilicate Glass With and Without P2O5,” Journal of the American Ceramic Society, 2017, DOI: 10.1111/jace.14933.

Chen, G., “Lab-on-sensor Concept.

Calibration and Application in Evaluation of Structural Behaviors under Environmental and Loading Conditions,” Journal of Materials Science and Engineering, Vol. 6, No. 2, pp. 45 (supplemental issue), 2017, DOI: 10.4172/2169-0022.C1.060.

Fan, L., Tang, F., Reis, S.T., Chen, G., and Koenigsten, M., “Corrosion Resistance of Transmission Pipeline Steel Coated with Five Types of Enamels,” Acta Metallurgical Sinica (English Letters), Vol. 30, No. 4, pp. 390-398, 2017, DOI: 10.1007/ s40195-017-0554-y.

2017 Scholarly Productivity Report -- 7

JOURNAL PUBLICATIONS (continued) Li, X., Wang, J., Bao, Y., and Chen, G., “Cyclic Behavior of Damaged Reinforced Concrete Columns Repaired with High-performance Fiber-reinforced Cementitious Composite,” Engineering Structures, Vol. 136, pp. 26-35, 2017, DOI: 10.1016/j.engstruct.2017.01.015.

Anumolu, S., Abdelkarim, O., Abdulazeez, M., Gheni, A., and ElGawady, M.A., “Hollow-core FRP-concrete-steel Bridge Columns under Torsional Loading,” Fibers, Vol. 5, No. 4, pp. 44, 2017, (invited – cover page of the issue). http://www.mdpi.com/2079-6439/5/4/44.

Bao, Y., Ghasr, M.T., Ying, K., Chen, G., and Zoughi, R., “Microwave Synthetic Aperture Radar (SAR) Imaging for Nondestructive Evaluation of Mechanically Stabilized Earth Walls,” Materials Evaluation, Vol. 75, No. 2, 2017.

Gomaa, E., Sargon, S., Kashosi, C., and ElGawady, M.A., “Fresh Properties and Compressive Strength of High Calcium Alkali-activated Fly Ash Mortar,” Journal of King Saud University – Engineering Sciences, Vol. 29, No. 4, pp. 356-364, 2017, (invited). https://www.sciencedirect.com/ science/article/pii/S1018363917301320.

Bao, Y., Chen, Y., Hoehler, M.S., Smith, C.M., Bundy, M., and Chen, G., “Experimental Analysis of Steel Beams Subjected to Fire Enhanced by Brillouin Scattering Based Fiber Optic Sensor Data,” American Society of Civil Engineering - Journal of Structural Engineering, Vol. 143, No. 1, 2017, DOI: http://dx.doi.org/10.1061/(ASCE) ST.1943-541X.0001617.

Fakharifar, M., and Chen, G., “FRPconfined Concrete Filled PVC Tubes: A New Design Concept for Ductile Column Construction in Seismic Regions,” Construction and Building Materials, Vol. 130, pp. 1-10, 2017.

Pan, D., Chen, G., and Gao, L.L., “A Constrained Optimal Rayleigh Damping Coefficients for Structures with Closelyspaced Natural Frequencies in Seismic Analysis,” Advances in Structural Engineering, Vol. 20, No. 1, pp. 81-95, 2017, DOI: 10.1177/1369433216646007.

ElGawady, M.A. Abdelkarim, O., and ElGawady, M.A., “Seismic Performance of Hollow-core Composite Bridge Columns,” International Journal of Bridge Engineering, Special Issue: Experimental and Analytical Investigations with Emerging Bridge Design Methods, pp. 1-24, 2017, (invited). https://www.ijbe.net/issues/specialissues/itemlist/category/40-specialissue-2017.

8 -- 2017 Scholarly Productivity Report

Gheni, A., Abdelkarim, O., Abdulazeez, M., and ElGawady, M.A., “Texture and Design of Green Chip Seal using Recycled Crumb Rubber Aggregate,” Journal of Clean Production, Vol. 166, pp. 1084-1101, 2017. https://www.sciencedirect.com/science/ article/pii/S0959652617318462.

Youssf, O., ElGawady, M.A., Mills, J., and Ma, X., “Analytical Modeling of the Main Characteristics of Crumb Rubber Concrete,” American Concrete Institute, ACI SP 314, pp. 1-18, 2017, https://www. concrete.org/publications/international concreteabstractsportal/m/details/ id/51689742.

Moustafa, A., and ElGawady, M.A., “Dynamic Properties of High Strength Rubberized Concrete,” American Concrete Institute, ACI SP 314, pp. 1-22, 2017, https://www.concrete.org/ publications/internationalconcrete abstractsportal/m/details/id/51689741.

Abdelkarim, O., and ElGawady, M.A., “Performance of Bridge Piers under Vehicle Collision,” Engineering Structures Journal, Vol. 140, pp. 337-352, 2017, https://www.sciencedirect.com/science/ article/pii/S0141029617306090.

Alabdulhady, M., Abdelkarim, O.I., Sneed, L.H., and ElGawady, M.A., “Finite Element Study on the Behavior of RC Beams Strengthened with PBO-FRCM Composite under Torsion,” Composite Structures, Vol. 179, pp. 326-339, 2017, https://www. sciencedirect.com/science/article/pii/ S0263822317312217.

Gheni, A., ElGawady, M.A., and Myers, J.J., “Mechanical Characterization of Concrete Masonry Units Manufactured with Crumb Rubber Aggregate,” American Concrete Institute, Materials Journal, Vol. 114, No. 1, pp. 65-76, 2017, https:// www.concrete.org/publications/ internationalconcreteabstractsportal. aspx?m=details&i=51689482.

Gheni, A. ElGawady, M.A., and Myers, J.J., “Thermal Characterization of Cleaner and Eco-efficient Masonry Units Using Sustainable Aggregates,” Journal of Cleaner Production, Vol. 165, pp. 980-993, 2017, https://www.sciencedirect.com/ science/article/pii/S0959652617316438.

Hassanli, R., ElGawady, M.A., and Mills, J.E., “In-plane Flexural Strength of Unbonded Post-tensioned Concrete Masonry Walls,” Engineering Structures Journal, Vol. 136, pp. 245-260, 2017, https://www.sciencedirect.com/science/ article/pii/S0141029617300421.

Moustafa, A., Gheni, A., and ElGawady, M.A., “Shaking-table Testing of High Energy-dissipating Rubberized Concrete Columns,” ASCE Journal of Bridge Engineering, Vol. 22, No. 8, 04017042-1:13, 2017, https:// ascelibrary.org/doi/abs/10.1061/%28 ASCE%29BE.1943-5592.0001077.

Abdelkarim, O., and ElGawady, M.A., Gheni, A., Anumolu, S., and Abdulazeez, M., “Seismic Performance of Innovative Hollow-core FRP-concrete-steel Bridge Columns,” ASCE Journal of Bridge Engineering, Vol. 22, No. 2, 04016120-1:15, 2017, https://ascelibrary.org/doi/10.1061/ %28ASCE%29BE.1943-5592.0000985.

Hassanli, R., ElGawady, M.A., and Mills, J.E., “Simplified Approach to Predict the Flexural Strength of Self-centering Masonry Walls,” Engineering Structures Journal, Vol. 142, pp. 255-271, 2017, https://www.sciencedirect.com/science/ article/pii/S0141029616313992.

Feys, D.

Hu, X.

Feys, D., Cepuritis, R., Jacobsen, S., Lesage, K., Secrieru, E., and Yahia, A., “Measuring Rheological Properties of Cement Pastes: Most Common Techniques, Procedures and Challenges,” Rilem Technical Letters, Vol. 2, pp. 129-135, 2017, http://dx.doi. org/10.21809/rilemtechlett.2017.43.

Hu, X., Chiu, Y.-C., Villalobos, J.A., and Nava, E., “A Sequential Decomposition Framework and Method for Calibrating Dynamic Origin-destination Demand in a Congested Network,” IEEE Transactions on Intelligent Transportation Systems, Vol. 18, No. 10, pp. 2790-2797, 2017, http:// ieeexplore.ieee.org/document/7852490/.

Bowles, E.A., Feys, D., Ercal, N., Sprague, R.S., “Liposomal-delivery of Phosphodiesterase 5 Inhibitors Augments UT-15C-stimulated ATP Release from Human Erythrocytes,” Biochemistry and Biophysics reports, Vol. 12, pp. 114-119, 2017, https://doi. org/10.1016/j.bbrep.2017.09.002.

Ferraris, C.F., Billberg, P., Ferron, R., Feys, D., Hu, J., Kawashima, S., Koehler, E., Sonebi, M., Tanesi, J., and Tregger, N., “Role of Rheology in Achieving Successful Concrete Performance,” Concrete International, Vol. 39, pp. 43-51, 2017.

Yuan, Q., Zhou, D., Khayat, K.H., Feys, D., and Shi, C., “On the Measurement of Evolution of Structural Build-up of Cement Paste with Time by Static Yield Stress Test vs. Small Amplitude Oscillatory Shear Test,” Cement and Concrete Research, Vol. 99, pp. 183-189, 2017, https://doi. org/10.1016/j.cemconres.2017.05.014.

Van Der Vurst, F., Grunewald, S., Feys, D., Lesage, K., Vandewalle, L., Vantomme, J., De Schutter, G., “Effect of the Mix Design on the Robustness of Fresh Self-compacting Concrete,” Cement and Concrete Composites, Vol. 82, pp. 190-201, 2017, https://doi.org/10.1016/j.cemcon comp.2017.06.005.

Feys, D., and Khayat, K.H., “Particle Migration during Concrete Rheometry: How Bad is it?” Materials and Structures, Vol. 50, No. 2, pp. 122, 2017, https://doi. org/10.1617/s11527-016-0992-4.

Yuan, Q., Lu, X., Khayat, K.H., Feys, D., and Shi, C., “Small Amplitude Oscillatory Shear Technique to Evaluate Structural Build-up of Cement Paste,” Materials and Structures, Vol. 50, pp. 1-12, 2017, https://doi. org/10.1617/s11527-016-0978-2.

Hu, X., Chiu, Y.-C., and Shelton, J., “Development of a Behaviorally Induced System Optimal Travel Demand Management System,” Journal of Intelligent Transportation Systems, Vol. 21, No. 1, pp. 12-25, 2017, http:// www.tandfonline.com/doi/abs/10.1080/ 15472450.2016.1171151?journalCode= gits20.

Xiaoyu, Z., Yuan, Y., Hu, X., Chiu, Y.-C., and Ma, Y.-L., “A Bayesian Network Model for Contextual Versus Non-contextual Driving Behavior Assessment,” Transportation Research Part C: Emerging Technologies, Vol. 81, pp. 172-187, 2017, https:// www.sciencedirect.com/science/article/ pii/S0968090X17301535.

Kang, A., Chiu, Y.-C., Hu, X., and Chen, X., “A Network Partitioning Algorithmic Approach for Macroscopic Fundamental Diagram-based Hierarchical Traffic Network Management,” IEEE Transactions on Intelligent Transportation Systems, No. 99, pp. 1-10, 2017, http://ieeexplore. ieee.org/document/7967630/.

Khayat, K.H. Sadati, S., and Khayat, K.H., “Rheological and Hardened Properties of Mortar Incorporating High-volume Ground Glass Fiber,” Construction and Building Materials, Vol. 5, No. 152, pp. 978-89, 2017, DOI: doi.org/10.1016/j.conbuildmat.2017.

07.065.

Hosseinpoor, M., Khayat, K.H., and Yahia, A., “Numerical Simulation of Dynamic Segregation of Self-consolidating Concrete (SCC) in T-Box Set-up,” Computers and Concrete, Vol. 20, No. 3, pp. 297-310, 2017, DOI: 10.12989/cac.2017.20.3.257.

Gil, A., Pacheco, F. Christ, R., Khayat, K.H., and Tutikian, B. “Comparative Study of Concrete Panels’ Fire Resistance,” ACI Materials Journal, Vol. 114, No. 5, pp. 755-762, 2017, DOI: 10.14359/ 51689715.

Meng, W., and Khayat, K.H., “Effects of Saturated Lightweight Sand Content on Key Characteristics of Ultra-highperformance Concrete,” Cement and Concrete Research, Vol. 101, pp. 46-54, 2017, DOI: doi.org/10.1016/j.cemconres.

2017.08.018.

Meng, W., Yao, Y., Mobasher, B., and Khayat, K.H., “Effects of Loading Rate and Notch-to-Depth Ratio of Notched Beams on Flexural Performance of Ultra-highperformance Concrete,” Cement and Concrete Composites, Vol. 83, pp. 349-59, 2017, DOI: 10.1016/j.cemconcomp.2017.

07.026.

Hosseinpoor, M., Khayat, K.H., and Yahia, A., “Numerical Simulation of Self-Consolidating Concrete Flow as a Heterogeneous Material in L-Box Set-up: Effect of Rheological Parameters on Flow Performance,” Cement and Concrete Composites, Vol. 1, No. 83, pp. 290-307, 2017, DOI: 10.1617/s11527-017-1032-8.

Sadati, H., and Khayat, K.H., “Restrained Shrinkage Cracking of Recycled Aggregate Concrete,” Materials and Structures, Vol. 50, No. 4, pp. 206, 2017, DOI: 10.1617/ s11527-017-1074-y.

Long, W., Khayat, K.H., Yahia, A., Hwang.

S.-D., and Xing, F., “Rheological Approach in Proportioning and Evaluating Prestressed Self-consolidating Concrete,” Cement and Concrete Composites, Vol. 82, pp. 105-116, 2017, DOI: 10.1016/j.cemcon comp.2017.05.008.

Liu, J., Shi, C., Ma, X., Khayat, K.H., Zhang, J., and Wang, D., “An Overview on the Effect of Internal Curing on Shrinkage of High Performance Cement-based Materials,” Construction & Building Materials, Vol. 15, No. 146, pp. 702-712, 2017, DOI: doi.org/10.1016/j.conbuildmat.

2017.04.154.

2017 Scholarly Productivity Report -- 9

JOURNAL PUBLICATIONS (continued) Sadati, H., and Khayat, K.H., “Rheological and Hardened Properties of Mortar Incorporating High-volume Ground Glass Fiber,” Construction & Building Materials, Vol. 152, pp. 978-989, 2017, DOI: doi.org/10.1016/j.conbuildmat.

2017.07.065.

Aïssoun, B.M., Gallias, J.-L., and Khayat, K.H., “Influence of Formwork Material on Transport Properties of Self-consolidating Concrete near Formed Surfaces,” Construction and Building Materials, Vol. 146, pp. 329-337, 2017, DOI: doi.org/10.1016/j.conbuildmat.2017.

04.104.

Mehdipour, I., Kumar, A., and Khayat, K.H., “Rheology, Hydration, and Strength Evolution of Interground Limestone Cement Containing PCE Dispersant and High Volume Supplementary Cementitious Materials,” Materials and Design, Vol. 127, pp. 54-66, 2017, DOI: doi.org/10.1016/j.matdes.

2017.04.061.

Sadati, S., Arezoumandi, M., Khayat, K.H., and Volz, J.S., “Bond Performance of Sustainable Reinforced Concrete Beams,” ACI Materials Journal, Vol. 114, No. 4, pp. 537-547, 2017, DOI: 10.14359/51689776.

Mehdipour, I., Horst, M., Zoughi, R., and Khayat, K.H., “Use of Near-field Microwave Reflectometry to Evaluate Steel Fiber Distribution in Cement-based Mortars,” Journal of Materials in Civil Engineering, Vol. 29, No. 7, pp. 1-12, 2017, DOI: 10.1061/ (ASCE)MT.1943-5533.0001850.

Hwang, S.-D., Lepesqueux, E., and Khayat, K.H., “Effect of Lightweight Aggregate Volume on Key Properties of SCC Designated for Repair Applications,” Journal of Sustainable Cement-Based Materials, Vol. 15, pp. 1-20, 2017, DOI: doi.org/10.1080/21650373.2017.1344588.

Yuan, Q., Zhou, D., Khayat, K.H., Feys, D., and Shi, C., “On the Measurement of Evolution of Structural Build-up of Cement Paste with Time by Static Yield Stress Test vs. Small Amplitude Oscillatory Shear Test,” Cement and Concrete Research, Vol. 99, pp. 183-189, 2017, https://doi. org/10.1016/j.cemconres.2017.05.014.

10 -- 2017 Scholarly Productivity Report

Bao, Y., Valipour, M., Meng, W., Chen, G., and Khayat, K.H., “Distributed Fiber Optic Sensor-enhanced Detection and Prediction of Shrinkage-induced Delamination of Ultra-high-performance Concrete Overlay,” Smart Materials and Structures, Vol. 26, No. 8, 2017, https://doi. org/10.1088/1361-665X/aa71f4.

Omran, A.F., and Khayat, K.H., “Effect of Formwork Characteristics on SCC Lateral Pressure,” Journal of Materials in Civil Engineering, Vol. 9, No. 5, 04016293, 10 pp., 2017, https://doi.org/:10.1061/(ASCE) MT.1943-5533.0001827.

Omran, A.F., and Khayat, K.H., “Progress to Understand Influence of Reinforcement Density on SCC Lateral Pressure,” Materials and Structures, Vol. 50, No. 2, pp. 152, 2017, https://doi.org/:10.1617/ s11527-017-1022-x.

Hosseinpoor, M., Khayat, K.H., and Yahia, A., “Numerical Simulation of Self-consolidating Concrete Flow as a Heterogeneous Material in L-Box Set-up: Coupled Effect of Reinforcing Bars and Aggregate Content on Flow Characteristics,” Materials and Structures, Vol. 50, No. 163, pp. 163, 2017, https:// doi.org/:10.1617/s11527-017-1032-8.

Esmaeilkhanian, B., Khayat, K.H., and Wallevik, O.H., “Mix Design Approach for Low-powder Self-consolidating Concrete: Eco-SCC – Content Optimization and Performance,” Materials and Structure, Vol. 50, No. 124, pp. 124, 2017, https:// doi.org/10.1617/s11527-017-0993-y.

Megid, W., and Khayat, K.H., “Bond Strength in Multilayer Castings of Selfconsolidating Concrete,” ACI Materials Journal, Vol. 114, No. 3, pp. 467-476, 2017, https://doi.org/10.14359/51689597.

Wu, Z., Shi, C., and Khayat, K.H., “Effect of Nano-SiO2 Particles and Curing Time on Development of Fiber-matrix Bond Properties and Microstructural of Ultra-high Strength Concrete with Nano-SiO2 Particles,” Cement and Concrete Research, Vol. 95, pp. 247256, 2017, https://doi.org/10.1016/j. undsp.2017.07.001.

Meng, W., and Khayat, K.H., “Improving Flexural Performance of Ultra-highperformance Concrete by Rheology Control of Suspending Mortar,” Composites Part B: Engineering, Vol. 117, pp. 26-34, 2017, https://doi.org/10.1016/ j.compositesb.2017.02.019.

Mehdipour, I., and Khayat, K.H., “Effect of Particle-size Distribution and Specific Surface Area of Different Binder Systems on Packing Density and Flow Characteristics of Cement Paste,” Cement, Concrete and Composites, Vol. 78, pp. 120-131, 2017, https://doi.org/10.1016/ j.cemconcomp.2017.01.005.

Feys, D., and Khayat, K.H., “Particle Migration during Concrete Rheometry: How Bad is it?” Materials and Structures, Vol. 50, No. 2, pp. 122, 2017, https:// doi:10.1617/s11527-016-0992-4 .

Meng, W., Valipour, M., and Khayat, K.H., “Optimization and Performance of Cost-effective Ultra-high Performance Concrete,” Materials and Structures, Vol. 50, No. 29, pp. 1-16, 2017, https://doi. org/10.1617/s11527-016-0896-3.

Naji, S., Karray, M., and Khayat, K.H., “Versatility of Piezoelectric Ring Actuator Technique for Characterisation of Cement Paste and Mortar,” ASTM Advances in Civil Engineering Materials, Vol. 6, No. 1, pp.

189-212, 2017, https://doi.org/10.1520/ ACEM20160039.

Esmaeilkhanian, B., Diederich, P., Khayat, K.H., and Yahia, A., and Wallevik, Ó.H., “Influence of Particle Lattice Effect on Stability of Suspensions: Application to Self-consolidating Concrete,” Materials and Structures Journal, Vol. 50, No. 39, pp. 39, 2017, DOI: 10.1617/s11527-0160908-3.

Yuan, Q., Lu, X., Khayat, K.H., Feys, D., and Shi, C., “Small Amplitude Oscillatory Shear Technique to Evaluate Structural Build-up of Cement Paste,” Materials and Structures Journal, Vol. 50, pp. 1-12, 2017, DOI: https://doi.org/10.1617/s11527-0160978-2.

Libre, N.A. Mehdipour, I., and Libre, N.A., “Linking Fiber Factor to Material Performance of Fiber-reinforced Self-consolidating Cement-based Materials,” ACI Materials Journal, Vol. 114, No. 1, pp. 77-92, 2017. https://doi.org/10.14359/51689483.

Liu. J. Zhao, S., Liu. J., Li, P., and Saboundjian, S., “Dynamic Modulus Characterization of Alaskan Asphalt Mixtures for Mechanistic Empirical Pavement Design,” ASCE Journal of Materials in Civil Engineering, Vol. 29, No. 11, 2017, http://ascelibrary.org/doi/ 10.1061/%28ASCE%29MT.1943-5533.

0002069.

Liu, J., Zhang, X., Li, L., and Saboundjian, S., “Resilient Behavior of Unbound Granular Materials Subjected to a Closed-system Freeze-thaw Cycle,” ASCE Journal of Cold Regions Engineering, Vol. 32, No. 1: 04017015, 2017, http:// ascelibrary.org/doi/abs/10.1061/%28 ASCE%29CR.1943-5495.0000142 .

Zhao, S., Liu, J., Li, P., and Burritt, T., “Asphalt Binder Adaption for Climatic Conditions in Cold Regions: Alaska Experience,” ASCE Journal of Materials in Civil Engineering, Vol. 29, No. 1: 04016184, 2017. http://ascelibrary. org/doi/abs/10.1061/(ASCE)MT.19435533.0001709.

Liu, J., Zhao, S., Li, P., and Saboundjian, S., “Variability of Composition, Volumetric and Mechanic Properties of Hot Mix Asphalt for Quality Assurance,” ASCE Journal of Materials in Civil Engineering, 2017, DOI: 10.1061/(ASCE)MT.19435533.0001481, D4015004, http:// ascelibrary.org/doi/abs/10.1061/(ASCE) MT.1943-5533.0001481.

Ma, H. Long, W., Wei, J., Ma, H., and Xing, F., “Dynamic Mechanical Properties and Microstructure of Graphene Oxide Nanosheets Reinforced Cement Composites,” Nanomaterials, Vol. 7, Issue 12, Article No. 407, 19 pp., 2017, DOI: 10.3390/nano7120407.

Liu, J., Zhao, S., Li, L., Li, P., and Saboundjian, S., “Low Temperature Cracking Analysis of Asphalt Binders and Mixtures,” Cold Regions Science and Technology, Vol. 141, pp. 78-85, 2017, http://www.sciencedirect.com/science/ article/pii/S0165232X16303834.

Li, X., Bao, Y., Wu, L., Yan, Q., Ma, H., Chen, G., and Zhang, H., “Thermal and Mechanical Properties of Highperformance Fiber-reinforced Cementitious Composites after Exposure to High Temperatures,” Construction and Building Materials, Vol. 157, pp. 829-838, 2017, DOI: 10.1016/j.conbuildmat.2017.

09.125.

Shu, X., Liu, J., and Huang, B., “Special Issue on Innovations on Paving Materials,” ASCE Journal of Materials in Civil Engineering, 2017, DOI: 10.1061/ (ASCE)MT.1943-5533.0001911, http:// ascelibrary.org/doi/full/10.1061/(ASCE) MT.1943-5533.0001911.

Liao, W., Ma, H., Sun, H., Huang, Y., and Wang, Y., “Potential Large-volume Beneficial use of Low-grade Fly Ash in Magnesia-phosphate Cement Based Materials,” Fuel, Vol. 209, pp. 490-497, 2017, DOI: 10.1016/j.fuel.2017.08.028.

Liu, J., Zhao, S., Mullin, A., and Rein, J., “Use of the Micro-deval Test for Assessing Alaska Aggregates,” Frontiers of Structural and Civil Engineering, 2017, DOI: 10.1007/ s11709-016-0359-5, https://link.springer. com/article/10.1007/s11709-016-0359-5.

Zhang, L., Yamauchi, K., Li, Z., Zhang, X., Ma, H., and Ge, S., “Novel Understanding of Calcium Silicate Hydrate from Dilute Hydration,” Cement and Concrete Research, Vol. 99, pp. 95-105, 2017, DOI: 10.1016/j.cemconres.2017.04.016.

Xu, B., Ma, H., Shao, H., Li, Z., and Lothenbach, B., “Influence of Fly Ash on Compressive Strength and Microcharacteristics of Magnesium Potassium Phosphate Cement Mortars,” Cement and Concrete Research, Vol. 99, pp. 86-94, 2017, DOI: 10.1016/j.cemconres.2017.05.008.

Hanif, A., Parthasarathy, P., Ma, H., Fan, T., and Li, Z., “Properties Improvement of Fly Ash Cenosphere Modified Cement Pastes using Nano Silica,” Cement & Concrete Composites, Vol. 81, pp. 35-48, 2017, DOI: 10.1016/j.cemconcomp.2017.04.008.

Ma, H., and Xu, B., “Potential to Design Magnesium Potassium Phosphate Cement Paste Based on an Optimal Magnesia-tophosphate Ratio,” Materials and Design, Vol. 118, pp. 81-88, 2017, DOI: 10.1016/ j.matdes.2017.01.012.

Hou, D., Lu, Z., Li, X., Ma, H., and Li, Z., “Reactive Molecular Dynamics and Experimental Study of Graphene-cement Composites: Structure, Dynamics and Reinforcement Mechanisms,” Carbon, Vol. 115, pp. 188-208, 2017, DOI: 10.1016/ j.carbon.2017.01.013.

Zhang, J., Ma, H., Pei, H., and Li, Z., “Steel Corrosion in Magnesia-phosphate Cement Concrete Beams,” Magazine of Concrete Research, Vol. 69, No. 1, pp. 35-45, 2017, DOI: 10.1680/jmacr.15.00496.

Myers, J.J. Alghazali, H.H., and Myers, J.J., “Shear Behavior of Full-scale High Volume Fly Ash – Self Consolidating Concrete (HVFA-SCC) Beams,” Elsevier’s Construction and Building Materials Journal, Amsterdam, Netherlands, Vol. 157, pp. 161-171, 2017, DOI: https:// doi.org/10.1016/j.conbuildmat.2017.

09.061.

Aljazaeri, Z.R., and Myers, J.J., “Erratum for Strengthening of Reinforced Concrete Beams in Shear with a Fabric-reinforced Cementitious Matrix,” American Society of Civil Engineering – Journal of Composites for Construction, Vol. 21, No. 6, 2017, https://doi.org/10.1061/(ASCE) CC.1943-5614.0000824 .

2017 Scholarly Productivity Report -- 11

JOURNAL PUBLICATIONS (continued) Alghazali, H.H., and Myers, J.J., “Optimization Performance of High Volume Fly Ash Self-consolidating Mixtures with Hydrated Lime (Mortar Component),” American Concrete Institute (ACI) Special Publication, Farmington Hills, MI, SP-320-46, 2017, https://www. concrete.org/publications/international concreteabstractsportal.aspx?m=details &ID=51701084.

Alghazali, H.H., and Myers, J.J., “Performance Study of Ecological Self-consolidating Cement Mixtures (ECO-SCCM),” American Society of Civil Engineering – Journal of Materials in Civil Engineering, Vol. 29, Issue 12, pp.

1-11, 2017, DOI: https://doi.org/10.1061/ (ASCE)MT.1943-5533.0002102.

Gheni, A., ElGawady, M.A., and Myers, J.J., “Thermal Characterization of Cleaner and Eco-efficient Masonry Units using Sustainable Aggregates,” Journal of Cleaner Production, Vol. 165, pp. 980-993, 2017, https://www.sciencedirect.com/ science/article/pii/S0959652617316438.

Alghazali, H.H., and Myers, J.J., “Temporal Dependent Prestress Loss Behavior of NU Bridge Girders in Missouri Bridge A7957,” Precast-Prestressed Concrete Institute Journal, Vol. 62, No. 6, pp. 76-87, 2017.

Gooranorimi, O., Myers, J.J., and Nanni, A., “GFRP Reinforcements in Box Culvert Bridge: A Case Study After Two Decades of Service,” Concrete Pipe and Box Culverts, ASTM STP1601, J. Meyer and J. Beakley, Eds., ASTM International, West Conshohocken, PA, pp. 75-88, 2017, DOI: http://dx.doi.org/10.1520/ STP160120160119.

Aljazaeri, Z.R., and Myers, J.J., “Strengthening of Reinforced Concrete Beams in Shear with a Fabric-reinforced Cementitious Matrix,” American Society of Civil Engineering – Journal of Composites for Construction, Vol. 21, No. 5, pp. 1-11, 2017, DOI: https://doi.org/10.1061/(ASCE) CC.1943-5614.0000822.

12 -- 2017 Scholarly Productivity Report

Aljazaeri, Z.R., and Myers, J.J., “Fatigue and Flexural Behavior of Reinforced Concrete Beams Strengthened with a Fiber-reinforced Cementitious Matrix,” American Society of Civil Engineering – Journal of Composites for Construction, Vol. 21, No. 1, pp.1-7, https://doi. org/10.1061/(ASCE)CC.1943-5614.

0000726.

Gheni, A., ElGawady, M.A, and Myers, J.J., “Mechanical Characterization of Concrete Masonry Units Manufactured with Crumb Rubber Aggregate,” American Concrete Institute Materials Journal, Vol. 114, No. 1, pp. 65-76, 2017, https://www.concrete.org/publications/ internationalconcreteabstractsportal. aspx?m=details&i=51689482.

Oerther, D.B. Matar, G., Bagchi, S., Zhang, K., Oerther, D.B., and Saikaly, P., “Membrane Biofilm Communities in Full-scale Membrane Bioreactors are not Randomly Assembled and Consist of a Core Microbiome,” Water Research, Vol. 123, pp. 124-133, 2017, DOI: 10.1016/ j.watres.2017.06.052.

Panasevich, M.R., Peppler, W.T., Oerther, D.B., Wright, D.C., and Rector, R.S., “Microbiome and NAFLD: Potential Influence of Aerobic Fitness and Lifestyle Modification,” Physiological Genomics; DOI: 10.1152/physiolgenomics.

00012.2017.

Oerther, S.E., and Oerther, D.B., “Pierre Bourdieu’s Theory of Practice Offers Nurses a Framework to Uncover Embodied Knowledge of Patients Living with Disabilities or Illnesses: a Discussion Paper,” Journal of Advanced Nursing, DOI: 10.1111/jan.13486.

Schonberg, W.P. Schonberg, W.P., and Williamsen, J.E., “Calculating Hole Size and Crack Length in Multi-wall Systems Following an Orbital Debris Impact,” International Journal of Impact Engineering, Vol. 109, pp. 335-341, 2017, https://doi.org/10.1016/j.ijimpeng.

2017.07.015.

Sneed, L.H. Yang, Y., He, R., and Sneed, L.H., “Seismic Repair Design of RC Bridge Columns Damaged Under Combined Bending and Torsion Effects,” International Journal of Bridge Engineering, Special Issue, pp.171-189, 2017, https://www.ijbe.net/ issues/special-issues/itemlist/category/ 40-special-issue-2017.

Gonzalez-Libreros, J.H., Sneed, L.H., D’Antino, T., and Pellegrino, C., “Behavior of RC Beams Strengthened in Shear with FRP and FRCM Composites,” Engineering Structures, Vol. 150, pp. 830-842, 2017, DOI: 10.1016/j.engstruct.2017.07.084.

Alabdulhady M., Abdelkarim, O.I., Sneed, L.H., and ElGawady, M.A., “Finite Element Study on the Behavior of RC Beams Strengthened with PBO-FRCM Composite under Torsion,” Composite Structures, Vol. 179, pp. 326-339, 2017, https://www.sciencedirect.com/science/ article/pii/S0263822317312217.

Sneed, L.H., Ravazdezh, F., Santandrea, M., Imohamed, I.A.O., and Carloni, C., “A Study of the Compressive Behavior of Concrete Columns Confined with Steel-FRP Jackets using Digital Image Analysis,” Composite Structures, Vol. 179, pp. 195-207, 2017, DOI: 10.1016/j.compstruct.2017.07.047.

Sneed, L.H., Carloni, C., Baietti, G., and Fraioli, G., “Confinement of Clay Masonry Columns with SRG,” Key Engineering Materials, Vol. 747, pp. 350-357, 2017, DOI: 10.4028/www. scientific.net/KEM.747.350.

Varnavina, A., Sneed, L.H., Khamzin, A., Torgashov, E., and Anderson, N., “An Attempt to Describe a Relationship Between Concrete Deterioration Quantities and Bridge Deck Condition Assessment Techniques,” Journal of Applied Geophysics, Vol. 142, pp. 38-48, 2017, DOI: 10.1016/j.jappgeo.2017.05.009.

Gonzalez-Libreros, J.H., Sabau, C., Sneed, L.H., Pellegrino, C., and Sas, G., “State of Research on Shear Strengthening of RC Beams Using FRCM Composites,” Construction and Building Materials, Vol. 149, pp. 444-458, 2017 DOI: 10.1016/ j.conbuildmat.2017.05.128.

Focacci, F., Carloni, C., D’Antino, T., Sneed, L.H., and Pellegrino, C., “An Indirect Method to Calibrate the Interfacial Cohesive Material Law for FRCM-Concrete Joints,” Materials and Design, Vol. 128, pp. 206-217, 2017, DOI: 10.1016/j.matdes.2017.04.038.

Sabau, C., Gonzalez-Libreros, J.H., Sneed, L.H., Pellegrino, C., and Sas, G., “Use of Image Correlation System to Study the Bond Behavior of FRCM-Concrete Joints,” Materials and Structures, Vol. 50, No. 3, pp. 172, 2017, DOI: 10.1617/ s11527-017-1036-4.

Khamzin, A., Varnavina, A., Torgashov, E., Anderson, N., and Sneed, L.H., “Utilization of Air-launched Ground Penetrating Radar (GPR) for Pavement Condition Assessment,” Construction and Building Materials, Vol. 141, pp. 130-139, 2017, DOI: 10.1016/ j.conbuildmat.2017.02.105.

Alabdulhady M., Sneed, L.H., and Carloni, C., “Torsional Behavior of RC Beams Strengthened with PBO-FRCM Composite – An Experimental Study,” Engineering Structures, Vol. 136, pp. 393-405, 2017, DOI: 10.1016/ j.engstruct.2017.01.044.

Carloni, C., Verre, S., Sneed, L.H., and Ombres, L., “Loading Rate Effect on the Debonding Phenomenon in Fiber Reinforced Cementitious Matrix-concrete Joints,” Composites Part B, Vol. 108, pp. 301-314, 2017, DOI: 10.1016/ j.compositesb.2016.09.087.

Wang, J. Liu, G., and Wang, J., “Enhanced Removal of Total Nitrogen and Total Phosphorus

by Applying Intermittent Aeration to the Modified Ludzack-Ettinger (MLE) Process,” Journal of Cleaner Production, Vol. 166, pp. 163-171, 2017, DOI: 10.1016/ j.jclepro.2017.08.017.

Liu, G., and Wang, J., “Achieving Advanced Nitrogen Removal for Small Flow Wastewater using a Baffled Bioreactor (BBR) with Intermittent Aeration,” Journal of Environmental Management, Vol. 199, pp. 222-228, 2017, DOI: 10.1016/ j.jenvman.2017.05.047.

Wu, C. Wu, C., Huang R., and Liechti, K., “Characterizing Interfacial Sliding of Through-silicon-via by Nanoindentation,” IEEE Transaction on Device and Materials Reliability, Vol. 17, pp. 355-363, 2017, DOI: 10.1109/TDMR.2017.2681580.

Yan, G.R. Feng, R.Q., Liu F.C., Yan, G.R., and Chang, X.L., “Mechanical Behavior of Ring-sleeve Joints of Single-layer Reticulated Shells,” Journal of Constructional Steel Research, Vol. 128, pp. 601-610, 2017. DOI: https://doi.org/10.1016/j.jcsr.2016.09.023.

Zhang, X.

Lin, C., Presler, W., Zhang X., Jones, D., and Odgers, B., “Long-term Performance of H2Ri Wicking Fabric in Alaskan Pavements,” ASCE Journal of Performance of Constructed Facilities, Vol. 31, Issue 2, 2017. https://doi.org/10.1061/ (ASCE)CF.1943-5509.0000936.

Zeng, Z., Zhang X., Zhao, Y., and Lu, H., “Experimental Study on the Performance of a Ground Source Heat Pump System and the Heat-moisture Migration of Surrounding Soils in Karst Areas,” ASCE Journal of Performance of Constructed Facilities, Vol. 31, Issue 5, 2017. https://doi. org/10.1061/(ASCE)CF.1943-5509.0001044.

Wang, F., Han, J., Zhang, X., and Guo, J., “Laboratory Test to Evaluate Effectiveness of Wicking Fabric in Soil Moisture Reduction,” Geotextiles and Geomembranes, Vol. 45, pp. 8-13, 2017, http://dx.doi.org/10.1016/j.geotexmem.

2016.08.002.

Yang, J., Lu, H., Zhang, X., Li, J., and Wang, W., “An Experimental Study on Solidifying Municipal Sewage Sludge through Skeleton Building using Cement and Coal Gangue,” Advances in Materials Science and Engineering, Article ID 5069581, 13 pp., 2017, DOI: doi. org/10.1155/2017/5069581.

Zhang, Q., Lu, H., Li, J., Wang, W., and Zhang, X., “Hydraulic and Mechanical Behavior of Landfill Clay Liner Containing SSA in Contact with Leachate,” Journal of Environmental Technology, pp. 1-9, May, 2017, DOI: 10.1080/ 09593330.2017.1329348

Liu, J., Zhang, X., Li, L., and Saboundjian, S., “Resilient Behavior of Unbound Granular Materials Subjected to a Closed-system Freeze-thaw Cycle,” ASCE Journal of Cold Regions Engineering, Vol. 32, No. 1, 04017015, 2017, http:// ascelibrary.org/doi/abs/10.1061/%28 ASCE%29CR.1943-5495.0000142.

2017 Scholarly Productivity Report -- 13

CONFERENCE PAPERS Abdelrahman, M .

Noureldin, E., and Abdelrahman, M., “Analysis of Poisson’s Ratio during Uniaxial Unconfined Compression for RAP-Aggregate Base Layer Blends,” The 96th Annual Meeting of the Transportation Research Board (TRB), Paper No. 17-06296, Washington, D.C., January, 2017.

ElGawady, M.A. Nain, M., Abdulazeez, M.A., and ElGawady, M.A., “Behavior of Concretefilled Hybrid Large Rupture Strain FRP Tubes under Cyclic Axial Compression,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer.com/chapter/ 10.1007/978-981-10-6713-6_34.

Abdulazeez, M.A., and ElGawady, M.A., “Seismic Performance of Hollow-core Composite Columns under Cyclic Loading,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer.com/chapter/ 10.1007/978-981-10-6713-6_53.

Wang, S., and ElGawady, M.A., “Durability of Polyester-based GFRP Subjected to Hybrid Environmental and Mechanical Loads,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer.com/chapter/10.

1007/978-981-10-6713-6_42.

Anumolu, S., Abdelkarim, O.A., Abdulazeez, M.A., Gheni, A., and ElGawady, M.A., “Torsional Behavior of Hollow-core FRP-concrete-steel Bridge Columns,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Switzerland, September, 2017, https://www.empa.ch/smar/SMAR_2017_ Proceedings/papers/225.pdf.

Nain, M., Abdulazeez, M.A., and ElGawady, M.A., “Cyclic Compressive Behavior of Concrete-filled Hybrid Large Rupture Strain FRP Tubes,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Switzerland, September, 2017, https://www.empa.ch/smar/SMAR_2017_ Proceedings/papers/221.pdf.

Peer reviewed Abdulazeez, M.A., and ElGawady, M.A., “Nonlinear Analysis of Hollow-core Composite Building Columns,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Switzerland, September, 2017, https://www.empa.ch/smar/SMAR_2017_ Proceedings/papers/105.pdf.

Abdulazeez, M.A., and ElGawady, M.A., “Seismic Behavior of Precast Hollow-core FRP-concrete-steel Column having Socket Connection,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Switzerland, September, 2017, https://www.empa.ch/smar/SMAR_2017_ Proceedings/papers/104.pdf.

Al-Jaberi, Z., Myers, J.J., and ElGawady, M.A., “Seismic Performance of Reinforced Masonry Walls Strengthened with FRCM Subjected to Cyclic Loading,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canadamasonry designcentre.com/download/13th_ symposium/020-Al-Jaberi-Paper-2.pdf.

Gheni, A., and ElGawady, M.A., “Crumb Rubber as a Sustainable Aggregate in Chip Seal Pavement,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer.com/chapter/ 10.1007/978-981-10-6713-6_39.

Gomaa, E., Sargon, S., Kashosi, C., and ElGawady, M.A., “Fresh Properties and Early Compressive Strength of Alkali-activated High Calcium Fly Ash Paste,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer.com/chapter/ 10.1007/978-981-10-6713-6_49.

14 -- 2017 Scholarly Productivity Report

Pictured left to right:Ahmed Gheni,CE Ph.D; Nicholas Colbert,CE MS; Simon Peter Sargon,CE MS; and Amro Ramadan,CE Ph.D.

Al-Jaberi, Z., Myers, J.J., and ElGawady, M.A., “Performance of Reinforced Masonry Walls Strengthened with FRP Composite Exposed to Combined Environmental Conditions,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canadamasonrydesigncentre.com/ download/13th_symposium/010-AlJaberi-Paper-1.pdf.

Hassanli, O., ElGawady, M.A., and Mills, J.M., “Comparison of Available Expressions in Predicting the Flexural Strength of Self-centering Masonry Walls,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http:// canadamasonrydesigncentre.com/ download/13th_symposium/173Hassanli-Paper-1.pdf.

Gheni, A., ElGawady, M.A., and Myers, J.J., “Thermal Characterization of Concrete Masonry Units Manufactured using Recycled Tires as an Aggregate,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canadamasonry designcentre.com/download/13th_ symposium/056-Gheni-Paper-2.pdf.

Gheni, A., ElGawady, M.A., and Myers, J.J., “Cyclic Behavior of Concrete Masonry Units Manufactured with Recycled Tires as an Aggregate,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canadamasonrydesigncentre.com/ download/13th_symposium/057Gheni-Paper-3.pdf.

Moustafa, A., and ElGawady, M.A., “Seismic Behavior of a Damage-resistant Segmental Bridge Column with External Energy Dissipaters,” Transportation Research Board (TRB), Washington, D.C., January, 2017, http://amonline.trb.org/ 63532-trb-1.3393340/t003-1.3409998/ 377-1.3410213/17-04658-1.3410216/ 17-04658-1.3410217?qr=1.

Abdulazeez, M.A., Abdelkarim, O., Gheni, A., ElGawady, M.A., and Sanders, G., “Effects of Footing Connection on the Performance of Precast Hollow-core Fiber Reinforced Polymer-concrete-steel Columns,” Transportation Research Board (TRB), Washington, D.C., January, 2017, http://amonline.trb.org/63532-trb-1.

3393340/t003-1.3409998/220-1.3410412/ 17-01256-1.3400341/17-01256-1.3410422? qr=1.

Wang, S., and ElGawady, M.A., “Combined Seawater Exposure and Axial Cyclic Load Behavior of Concrete-filled FRP Tube (CFFT),” 16th World Conference Earthquake Engineering, Santiago, Chile, January, 2017, https://invenio.itam.cas.cz/ record/20000?ln=en.

Al-Jaberi, Z., Myers, J.J., and ElGawady, M.A., “Effectiveness of FRCM System in Strengthening Reinforced Masonry Walls Subjected to Cyclic Loading,” 39th IABSE Symposium, Vancouver, Canada, September, 2017, http://www.ingenta connect.com/contentone/iabse/report/ 2017/00000109/00000039/art00001.

Hu, X. Hu, X., Zhu, X., Yuan, Y., Rehan, A., Chiu, Y.-C., and Zmud, M., “A Multi-resolution Approach to Investigate the Impacts of Pre-planned Road Capacity Reduction Based on Smartphone GPS Trajectory Data,” Transportation Research Board 96rd Annual Meeting, Washington, D.C., January, 2017, https://trid.trb.org/ view/1439157.

Noh, H., Sun, A., Hu, X., and Rehan, A., “Development of a Regional Network Performance Measurement Model for Planning Applications Based on Highfrequency GPS Data,” Transportation Research Board 96rd Annual Meeting, Washington, D.C., January, 2017, http:// amonline.trb.org/63532-trb-1.3393340/ t012-1.3406900/780-1.3406976/17-062101.3399450/17-06210-1.3406994?qr=1.

An, K., Hu, X., Chiu, Y.-C., and Chen, X., “A Network Partitioning Algorithm to Support Macroscopic Fundamental Diagram Based Hierarchical Traffic Network Control and Management,” Transportation Research Board 96rd Annual Meeting, Washington, D.C., January, 2017, http://ieeexplore.ieee. org/document/7967630/.

Libre, N.A. Sadati, S., and Libre, N.A., “Development of an Early Alert System to Predict Students at Risk of Failing Based on Their Early Course Activities,” 124th ASEE Annual Conference and Exposition, Columbus, OH, June, 2017, https:// www.asee.org/public/conferences/78/ papers/18736/view.

Libre, N.A., Jennings, J.W., and Skyles, S.A., “A Look at an Active Learning Strategies for Deeper Understanding: A Case Study in Mechanics of Materials,” ASEE Midwest Section Conference, Stillwater, OK, September, 2017, https://asee.ceatpd. okstate.edu/docs/ASEE_Midwest_ Section_2017_Papers_and_Poster_ Abstracts.zip.

Libre, N.A., “SecPro App as an Educational Tool for Teaching Engineering Mechanics,” ASEE Midwest Section Conference, Stillwater, OK, September, 2017, https:// asee.ceatpd.okstate.edu/docs/ASEE_ Midwest_Section_2017_Papers_and_ Poster_Abstracts.zip.

Liu, J. Liu, J., Zhao, S., and Li, L., “Low Temperature Cracking Analysis of Asphalt Binders and Mixtures,” The 96th Annual Meeting of the Transportation Research Board (TRB), Paper No. 1706166, Washington, D.C., January, 2017.

Myers, J.J. Rallabhandhi, S., and Myers, J.J., “Non-prestressed Bridge Deck-girder Composite with End-girder Continuity Detail using Ultra High Performance Concrete (UHPC) within the End Connection,” 3rd International Symposium on Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC 2017), Montpellier, France, October, 2017, Paper Submitted, 8 pages.

2017 Scholarly Productivity Report -- 15

CONFERENCE PAPERS (continued) Alghazali, H.H., and Myers, J.J., “Evaluation of Strains and Stresses of Prestressed Girders for Bridge A7957, MO, USA (Field Study),” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR 2017), Zurich, Switzerland, September, 2017, Paper Submitted, 8 pages. http://www.smar-conferences. org/smar/SMAR_2017_Proceedings/ papers/250.pdf .

Hernandez, E., and Myers, J.J., “Dynamic Load Allowance of a Prestressed Concrete Bridge through Field Load Tests,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR 2017), Zurich, Switzerland, September, 2017, http://www.smar-conferences.org/ smar/SMAR_2017_Proceedings/ papers/251.pdf .

Aljaberi, Z., Myers, J.J., and ElGawady, M.A., “Effectiveness of FRCM System in Strengthening Reinforced Masonry Walls Subjected to Cyclic Loading,” 39th International Association for Bridge & Structural Engineering (IABSE 2017), Vancouver, British Columbia, Canada, September, 2017, Paper Submitted, 9 pages. http://www.ingentaconnect.com/ contentone/iabse/report/2017/00000109/ 00000039/art00001.

Aljazaeri, Z.R., Alghazali, H.H., and Myers, J.J., “Flexure Performance of Two-way Concrete Slabs Reinforced with Carbon Fiber Grid,” 39th International Associationfor Bridge & Structural Engineering (IABSE 2017), Vancouver, British Columbia, Canada, September, 2017, Paper Submitted, 10 pages. http://www.ingentaconnect.com/ contentone/iabse/report/2017/ 00000109/00000041/art00005.

Aljazaeri, Z.R., Janke, M., and Myers, J.J., “Experimental Investigation on Anchorage Systems for Enhancing the Mechanical Performance of FRCM Composites in Retrofitting RC Structural Beams,” 8th International Conference on Advanced Composites in Construction (ACIC 2017), University of Sheffield, Sheffield, England, UK, September, 2017, Paper Submitted, 6 pages.

16 -- 2017 Scholarly Productivity Report

Wang, W., and Myers, J.J., “Flexural Behavior of GFRP Reinforced Panels with Varying Reinforcement Ratios after Longterm Filed Exposure,” 8th International Conference on Advanced Composites in Construction (ACIC 2017), University of Sheffield, Sheffield, England, UK, September, 2017, Paper Submitted, 6 pages.

Aljazaeri, Z.R., and Myers, J.J., “Environmental Effects on the Durability Performance of FRCM Composite Bonded to Concrete,” 5th International Conference on Durability of Fibre Reinforced Polymer (FRP) Composites for Construction & Rehabilitation of Structures (CDCC 2017), Sherbrooke, Quebec, Canada, July, 2017, Paper Submitted, 9 pages.

Wang, W., and Myers, J.J., “Bond Performance of SRP-to-Concrete Subjected to Environmental Cycling and Sustained Loading,” 5th International Conference on Durability of Fibre Reinforced Polymer (FRP) Composites for Construction & Rehabilitation of Structures (CDCC 2017), Sherbrooke, Quebec, Canada, July, 2017, Paper Submitted, 8 pages.

Gheni, A.A., ElGawady, M.A., and Myers, J.J., “Thermal Characterization of Concrete Masonry Units Manufactured Using Recycled Tires as an Aggregate,” 13th Canadian Masonry Symposium (13 CMS), Halifax, Nova Scotia, Canada, June, 2017, Paper Submitted, 11 pages.

Gheni, A.A., ElGawady, M.A., and Myers, J.J., “Cyclic Behavior of Concrete Masonry Units Manufactured with Recycled Tires as an Aggregate,” 13th Canadian Masonry Symposium (13 CMS), Halifax, Nova Scotia, Canada, June, 2017, Paper Submitted, 11 pages.

Aljaberi, Z., Myers, J.J., and ElGawady, M.A., “Performance of Reinforced Masonry Walls Strengthened with FRP Composite Exposed to Harsh Environmental Conditions,” 13th Canadian Masonry Symposium (13 CMS), Halifax, Nova Scotia, Canada, June, 2017, Paper Submitted, 7 pages.

Aljaberi, Z., Myers, J.J., and ElGawady, M.A., “Seismic Performance of Reinforced Masonry Walls Strengthened with FRMC Subjected to Cyclic Loading,” 13th Canadian Masonry Symposium (13 CMS), Halifax, Nova Scotia, Canada, June, 2017, Paper Submitted, 12 pages.

Alghazali, H.H., and Myers, J.J., “Evaluation of Prestress Losses for Bridge A7957 Constructed with High Strength Concrete (Field Study),” 2017 PCI Convention and National Bridge Conference, Cleveland, OH, March, 2017, 10 pages.

Hernandez, E., and Myers, J.J., “Initial Response of a Prestressed Selfconsolidating Concrete (SCC) Bridge Using Diagnostic Load Tests,” 5th International Symposium on Life-Cycle Civil Engineering (IALCCE 2016), Delft, The Netherlands, pp. 1072-1079, 2017.

Oerther, D.B. Oerther, D.B., “Using Nursing Theory to Improve the Teaching of Engineering Practice,” Proceedings of the American Society for Engineering Education, Columbus, OH, June, 2017, https:// www.asee.org/public/conferences/78/ papers/18230/download.

Oerther, D.B., “Reducing Costs While Maintaining Learning Outcomes Using Blended, Flipped, and Mastery Pedagogy to Teach Introduction to Environmental Engineering,” Proceedings of the American Society for Engineering Education, Columbus, OH, June, 2017, https://www.asee.org/public/conferences/ 78/papers/18228/download.

Oerther, D.B., “Diplomacy Lab Provides Term-length, Group Projects Integrating Policy Analysis and Liberal Arts into the Traditional Engineering Classroom,” Proceedings of the American Society for Engineering Education, Columbus, OH, June, 2017, https://www.asee.org/public/conferences/ 78/papers/18229/download.

Chuang Lin

Oerther, D.B., “Using Diplomacy Lab to Teach Interdisciplinary Students about Global Public Health,” Sigma Theta Tau, the International Honor Society of Nursing (STTI), Indianapolis, IN, October, 2017, http://hdl.handle.net/10755/622751.

Schonberg, W.P. Schonberg, W.P., “Predicting the Catastrophic Failure of Composite Plates Following a Hyper-velocity Impact,” Proceedings of the 30th International Symposium on Ballistics, Long Beach, CA, September, 2017, in Ballistics 2017, S. Chocron and J. Walker, eds, DEStech Publications, Inc., Lancaster, PA; ISBN 13: 978-1-60595-419-6.

Schonberg, W.P., “Predicting the Rupture of a Cryogenic Composite Pressure Vessel (COPV) Following a Hypervelocity Impact,” Proceedings of the 7th European Conference on Space Debris, Darmstadt, Germany, April, 2017, T. Flohrer, and F. Schmitz, eds, ESA Space Debris Office, Darmstadt, Germany, http://spacedebris 2017.sdo.esoc.esa.int.

Schonberg, W.P., and Hull, S., “MMOD Impact of Pressurized Vessels: Review of Design Criteria and Response Prediction Equations,” Proceedings of the 2017 IEEE Aerospace Conference, Big Sky, MT, March, 2017, https://doi.org/10.1109/AERO.2017.

7943813.

Schonberg, W.P., “Studies of Hypervelocity Impact Phenomena as Applied to the Protection of Spacecraft Operating in the MMOD Environment,” Proceedings of the 2017 Hypervelocity Impact Symposium, Canterbury, Kent, U.K., April, 2017; in Procedia Engineering, Vol. 204, pp. 4-42, 2017, https://doi. org/10.1016/j.proeng.2017.09.723.

Schonberg, W.P., and Ratliff, J.M, “Ballistic Limit Equations for Non-aluminum Projectiles Impacting Dual-wall Spacecraft Systems,” Proceedings of the 2017 Hypervelocity Impact Symposium, Canterbury, Kent, U.K., in Procedia Engineering, Vol. 204, pp. 516-521, 2017, https://doi.org/ 10.1016/j.proeng.2017.09.750.

Sneed, L.H. Carloni, C., Santandrea, M., Ravazdezh, F., and Sneed, L.H., “Stress-strain Response of Steel-FRP Confined Concrete Columns Determined by DIC,” SMAR 2017 – Fourth Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Zurich, Switzerland, September, 2017, http://www.smarconferences.org/smar/SMAR_2017_ Proceedings/papers/206.pdf.

Faleschini, F., Gonzalez-Libreros, J.H., Hofer, L., Sneed, L.H., and Pellegrino, C., “Experimental Behavior of a Severely Damaged RC Beam-column Joint Strengthened with FRCM Composites,” SMAR 2017 – Fourth Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Zurich, Switzerland, September, 2017, http://www.smarconferences.org/smar/SMAR_2017_ Proceedings/papers/263.pdf.

Gonzalez-Libreros, J.H., D’Antino, T., Sneed, L.H., Pellegrino, C., and Giacomin, G., “Transversal Reinforcement Interaction in RC Beams Strengthened in Shear with Externally Bonded Composites,” SMAR 2017 – Fourth Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Zurich, Switzerland, September, 2017, http://www.smar-conferences.org/smar/ SMAR_2017_Proceedings/papers/35.pdf.

Gonzalez-Libreros, J.H., Pellegrino, C., D’Antino, T., Sneed, L.H., “Evaluation of External Transversal Reinforcement Strains of RC Beams Strengthened in Shear with FRCM Composites,” Advanced Composites in Construction (ACIC) 2017, University of Sheffield, UK, September, 2017. https://re.public.polimi.it/ handle/11311/1043297#.WqXfaejwbic.

Wu, C. Wu, C., Huang R., and Liechti K., “Sliding of TSV/Si Interfaces,” Proceedings of 40th Annual Adhesion Society Conference, St. Petersburg, FL, February, 2017.

Bio-wicking System to Dehydrate Road Embankment under Unsaturated Conditions

Wu, C., Huang R., and Liechti K., “Direct Extraction of Mixed-mode Traction-separation Relations,” Proceedings of 40th Annual Adhesion Society Conference, St. Petersburg, FL, February, 2017.

Wu, C., Huang R., and Liechti K., “Determining Interfacial Behaviors using Nanoindentation,” Society of Experimental Mechanics, Indianapolis, IN, June, 2017.

Wu, C., Huang R., and Liechti K, “Characterizing Traction-separation Relations of Thin Films using Far-field Measurements,” Society of Experimental Mechanics, Indianapolis, IN, June, 2017.

Zhang, X. Xia, X., Luo, W., Yin, Z., and Zhang, X., “Automatic Detection of Coded Targets for Rapid Measurement of Volume Changes of Unsaturated Soil Specimens in Triaxial Tests,” Submitted to the 2nd Pan American Conference on Unsaturated Soils (PanAm-UNSAT 2017).

Lin, C., and Zhang, X., “A Bio-wicking System to Dehydrate Road Embankment under Unsaturated Conditions,” 2017 International Conference on Transportation Infrastructure and Materials, Qingdao, China, June, 2017.

2017 Scholarly Productivity Report -- 17

TECHNICAL REPORTS

Published

ElGawady, M.A.

Myers, J.J.

Gheni, A., Abdelkarim, O.I., Liu, X., Abdulazeez, M.A., Lusher, S.M., Liu, K., ElGawady, M.A., Shi, H., and Wang, J., Mechanical and Environmental Performance of Eco-friendly Chip Seal with Recycled Crumb Rubber, Missouri Department of Natural Resources, February, 2017.

Myers, J.J., and Gora Venancio, V., Ultra-high Performance Fiber-reinforced Concrete (UHPFRC) for Infrastructure Rehabilitation, Volume 2: Behavior of Ultra High Strength Concrete (UHSC) Bridge Deck Panels Compared to Conventional Stay-in-place Deck Panels, Final Report, RE-CAST: Research on Concrete Applications for Sustainable Transportation, Tier 1 University Transportation Center, Rolla, MO, 117 pp., August, 2017.

Feys, D. Feys, D., and Ley Hernandez, A.M., Influence of Casting Conditions on Durability and Structural Performance of HPC-AR: Optimization of Self-consolidating Concrete to Guarantee Homogeneity during Casting of Long Structural Elements, No. RECAST UTC# 00050028, Research on Concrete Applications for Sustainable Transportation (RE-CAST), 2017.

Myers, J.J., and Rallabhandhi, S., Ultra-high Performance Fiber-reinforced Concrete (UHPFRC) for Infrastructure Rehabilitation, Volume 1: Evaluation of Ultra High Strength Concrete (UHSC) in Joints of Bridge Girders, Final Report, RE-CAST: Research on Concrete Applications for Sustainable Transportation, Tier 1 University Transportation Center, Rolla, MO, 160 pp., 2017.

Hu. X.

Sneed, L.H.

Chiu, Y.-C., Hu. X., Ma, Y-L., and Zhu, X., Pay-As-You-Drive-AndYou-Save (PAYDAYS), Insurance Actuarial Study, Federal Highway Administration (FHWA), July, 2017.

Dunkelberg, D., Sneed, L.H., Zilch, K., and Reineck, K.-H., ACI-DAfStb Databases 2015 with Shear Tests for Evaluating for the Shear Design of Structural Concrete Members Without and With Stirrups Report on ACI-DAfStb Shear Databases – Part 3 – Database with Shear Tests on Prestressed Concrete Beams without Stirrups Subjected to Point Loads. Report DAfStb H., pp. 617, K-H. Reineck and D. Dunkelberg, eds., ISBN 978-3-41065295-36, Bestell-Nr. 65295, 2017. https://www.beuth.de/de/ publikation/dafstb-heft-617-englisch/269673407.

Liu, J. Liu, J., Zhao, S., and Li, L., Performance of Tencate Paving Interlayers in Asphalt Concrete Pavements, INE/CESTiCC Report, UAF, AK, 2017.

Mendoza, C.

Dunkelberg, D., Sneed, L.H., Zilch, K., and Reineck, K.-H., 2017.

ACI-DAfStb Databases 2015 with Shear Tests for Evaluating for the Shear Design of Structural Concrete Members Without and With Stirrups Report on ACI-DAfStb Shear Databases – Report Part 5 – Database with Shear Tests on Prestressed Concrete Beams with Vertical Stirrups Subjected to Point Loads. Report DAfStb H. 617, K.-H. Reineck and D. Dunkelberg, eds. SBN 9783-410-65295-36, Bestell-Nr. 65295, 2017. https://www.beuth.de/ de/publikation/dafstb-heft-617-englisch/269673407

Mendoza, C., and Mohammed-Ali, W., Hydraulic Characteristics of Four 3” NPS Pipes, Final Report, Bull Moose Tube Co., St. Louis, MO, 21 pp., August, 2017.

Yan, G.R.

Liu, J., Zhao, S., and McHattie, R., Continued Field Evaluation of Precutting for Maintaining Asphalt Concrete Pavements with Thermal Cracking, INE/CESTiCC Report, UAF, AK, 2017 http://cem.uaf.edu/media/244760/precut-final-report.pdf.

Yan, G.R., Damage and Instability Detection of Civil Large-scale Space Structures under Operational and Multi-hazard Environments based on Change in Macro-geometrical Patterns/ Shapes, Annual report, NSF project 1455709, April, 2017.

18 -- 2017 Scholarly Productivity Report

INVITED TALKS Burken J.G Burken J.G., and Kennen, K., “Phytoremediation and PhytoForensics: Mother Nature can Detect and Mitigate Pollutants…with Elegance,” EPA Clu-In National Webinar, October, 2017, https://clu-in.org/conf/tio/Phyto Forensics_101017/.

Burken J.G., “Sampling Tree Cores in Assessing Vapor Intrusion Risk,” The University Consortium for Field-focused Groundwater Contamination Research Annual Meeting, Guelph Ontario, Canada.

June, 2017.

Burken J.G., “Rethinking Plants in Engineering,” TedEx Talk, Missouri University of Science and Technology, April, 2017, https://www.youtube.com/ watch?v=ZdhqiGYZyFI.

Chen, G.

ElGawady, M.A., “Confinement of Masonry using an Innovative Steel Ring,” Seismic Committee of The Masonry Society, annual meeting, La Jolla, CA, November, 2017.

ElGawady, M.A., “Introduction to Reinforced Masonry Structural Design,” Seoul National University, Seoul, South Korea, May, 2017.

ElGawady, M.A., “Hollow-core Fiber Reinforced Polymer Concrete Steel Columns under Extreme Loads,” Seoul National University, Seoul, South Korea, May, 2017.

ElGawady, M.A., “Introduction to Reinforced Masonry Structural Design,” The 7th International Jordanian Civil Engineering Conference Workshop, Amman, Jordan, May, 2017.

Khayat, K.H.

Chen, G., “A Strategic Framework to Extend Structural Health Monitoring into Bridge Management,” Presented at the World Transport Convention, Beijing, China, June, 2017.

Khayat, K.H., Wu, Z. and Mehdipour, I., “The Role of Particle Characteristics in the Design and Performance of Eco-Crete,” Proceedings 9th International Conference on Cement and Concrete, Editor Yao Y., ISCC2017, Wuhan, China, November, 2017.

(Keynote presentation)

Chen, G., “Lab-on-sensor Concept, Calibration, and Application in Evaluation of Structural Behaviors under Environmental and Loading Conditions,” Presented at the 2017 Smart Materials and Structures, Orlando, FL, March, 2017, (keynote presentation).

Khayat, K.H., and Abdelrazik, A., “Effect of Fiber Type on Engineering Properties and Structural Performance of Fiberreinforced Self Consolidating Concrete,” ACI Fall Convention, Anaheim, CA, October, 2017.

ElGawady, M.A. ElGawady, M.A., “New Structural Systems for Sustainable and Accelerated Construction,” 7th Jordanian Civil Engineering Conference, Amman, Jordan, May, 2017.

Meng. W., and Khayat, K.H., “Mixture Optimization Strategies of Ultra-high Performance Concrete with High Volume of Supplementary Cementitious Materials,” Proceedings 10th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete (ICCM2017), Montreal, Canada, October, 2017.

Abdelrazik, A., and Khayat, K.H., “Performance of Fiber-reinforced Self-consolidating Concrete for Repair of Flexural Structural Elements,” 11th University Transportation Centers Spotlight Conference Rebuilding and Retrofitting the Transportation Infrastructure, Washington, D.C., September, 2017.

Valipour, M., Meng, W., and Khayat, K.H., “Performance of Ultra-high Performance Concrete as Cast-in-place Thin-bonded Concrete Overlay,” 11th University Transportation Centers Spotlight Conference Rebuilding and Retrofitting the Transportation Infrastructure, Washington, D.C., September, 2017.

Khayat, K.H., Hosseinpour, M., and Yahia, A., “Numerical Simulation of Dynamic Segregation of SCC under Restricted & Non-restricted Flow Conditions,” ACI Spring Convention, Detroit, MI, March, 2017.

Liu, J. Liu, J., “Recycling in Alaska’s Transportation Infrastructure,” Transportation Research Congress 2016, Beijing, China, May, 2017, (keynote presentation).

Liu, J., “Life Cycle Sustainability of Asphalt Concrete Pavement,” Panel session, ASCE CI Summit Meeting, Anaheim, CA, March, 2017.

Myers, J.J. Myers, J.J., “Diagnostic Test for Load Rating of a Prestressed SCC Bridge,” American Concrete Institute (ACI) 2017 Fall Conference, Anaheim, CA, October, 2017, (Co-presenter, ACI Committee 239 as Special Invited Presentation).

2017 Scholarly Productivity Report -- 19

INVITED TALKS (continued) Myers, J.J., “Impact Factor of a Prestressed SCC Bridge through Dynamic Load Tests,” Prestressed-Precast Concrete Institute (PCI) 2017 Convention and National Bridge Conference, Cleveland, OH, March, 2017, (Co-presenter, selected by Education Committee as Invited Presentation).

Myers, J.J., “GFRP Reinforcements in Box Culvert Bridge: A Case Study after Two Decades of Service,” Transportation Research Board (TRB) 2017 Annual Meeting, Committee AAF80, Washington, D.C., January, 2017.

Myers, J.J., “Innovative Infrastructure Developments and Long-term Performance Assessment,” Rolla Lion’s Club Featured Dinner Speaker, Rolla, MO, January, 2017.

Oerther, D.B. Oerther, D.B., “Maternal Health Discovery Project,” 2017 STTI Delta Lambda Global Awareness Luncheon, Saint Louis University, St. Louis, MO, November, 2017.

Oerther, D.B., “My Journey from Service Learning to Community-based Participatory Research,” Service Learning Symposium, Missouri University of Science and Technology, Rolla, MO, September, 2017.

Schonberg, W.P. Schonberg, W.P., “The Importance of a Global Technological Education,” TedxMissouriS&T, Missouri University of Science and Technology, Rolla, MO, April, 2017, https://www.tedxmst.com/ live-stream; starting at 1:48:50.

Sneed, L.H. Sneed, L.H., “Fiber Reinforced Composites: A Tool to Improve the Compressive and Seismic Response of Columns,” University of Bologna, Bologna, Italy, June, 2017.

20 -- 2017 Scholarly Productivity Report

Carloni, C., Santandrea, M., Imohamed, I., and Sneed, L.H., “Confinement of Concrete Columns with SRG,” ACI Spring 2017 Convention, Detroit, MI, March, 2017.

Sneed, L.H., Verre, S., Carloni, C., and Ombres, L., “Flexural Behavior of SRG-Strengthened RC Beams,” ACI Spring 2017 Convention, Detroit, MI, March, 2017.

Wu, C. Wu, C., “Small Scale Mechanics Relations Problems in Cement Composites,” Seminar by Professor Dongming Yan, Zhejiang University, Hangzhou, Zhejiang, China, December, 2017.

Wu, C., “Thermal Mechanical Problems in Microelectronics Devices,” International Young Scholar Forum, Harbin Institute of Technology, Harbin, Heilongjiang, China, December 2017.

Wu, C., “Multi-scale Experiment and Modeling on Failures of Microelectronic Materials,” International Young Scholar Forum, Tongji University, Shanghai, China, December, 2017.

Zhang, X. Zhang, X., “Use of Wicking Fabric to Dehydrate Road Pavements under Unsaturated Conditions,” Presented to the ACSE GI St. Louis Chapter Case Histories Seminar and Student Projects, St. Louis, MO, April, 2017.

Zhang, X.., “Limitations of Suctioncontrolled Triaxial Tests for Unsaturated Soil Characterization,” St. Louis GeoStructures Confluence, St. Louis, MO, November, 2017.

Zhang, X., “Challenges in the Unsaturated Soil Research and Possible Solutions,” 2017 International Conference on Transportation Infrastructure and Materials, Qingdao, China, June, 2017.

BOOK CHAPTERS & SCHOLARLY MONOGRAPHS Libre, N.A. Libre, N.A., “Mechanics of Materials, Learning through Practice,” 1st Edition, Apple iTunes store, Cupertino, CA, 1050 pp., 2017, https://itunes.apple.com/us/book/ mechanics-of-materials/ id1211130686.

Richardson, D.N. Richardson, D.N., Cost, V.T., Holland, J., Sorcic, A., Roberts, J., and Taylor, P., “Guide for Design and Proportioning of Mixtures for Concrete Pavements,” American Concrete Institute, ACI 325.14R-17, 71 pp., ISBN 9781-945487-66-8, 2017.

Kazanis, K., Birdwell, B., Buzelli, D., Cook, M., Gaspey, B., Holland, J., Parkes, N., Richardson, D.N., Rodden, R., Scurto, G., Tu, D., Tull, C., and Varner, R., “Guide for Design and Construction of Concrete Site Paving for Industrial and Trucking Facilities,” American Concrete Institute, ACI 330.2R-17, 67 pp., ISBN 978-1-945487-60-6, 2017.

Schonberg, W.P. Schonberg, W.P., “Emerging Tertiary Education Opportunities and Challenges in the Caribbean and Around the World,” The Caribbean in a Changing World: Surveying the Past, Mapping the Future, L. Smith, S. Fullerton-Cooper, E. Gordon, and A. Bodden, eds., Cambridge Scholars Publishing House, 2017, ISBN-13: 978-1-44380058-7.

CONFERENCE PRESENTATIONS

& Seminars

Burken J.G. Burken J.G., “In-home Exposures,” Chemours Technology Forum (DuPont), Wilmington, DE, July, 2017.

Burken J.G., “Sampling Tree Cores in Assessing Vapor Intrusion Risk,” The University Consortium for Field-focused Groundwater Contamination Research Annual Meeting, Guelph Ontario, Canada. June, 2017.

Burken J.G., “Reconnecting Energy and Water: Green Infrastructure,” Syracuse University, April, 2017.

Burken J.G., “Plants as Bio-sentinels to Mitigate Human Exposures: Phytoforensics,” State University of New York College of Environmental Science and Forestry, Syracuse, NY, April, 2017.

Manley, P.V., and Burken, J.G., “Hyperspectral Image Comparison of Monocots and Dicots to Exposure of Varying RDX, HMX, and TNT Concentrations,” Imaging and Geospatial Technical Forum, Baltimore, MD, March, 2017.

Bartels, K., Gibler, M., Limmer, M.A., and Burken, J.G., “Valuation of Green Roofs Impact on Urban Stormwater and Heat Islands,” 14th International Phytotechnologies Conference, Montreal Canada, September, 2017.

Chen, G. Chen, G., “Efficacy of Post-mainshock FRP/Steel Repaired RC Bridge Columns Subjected to Aftershocks,” 2nd International Bridge Seismic Workshop, Tongji University, November, 2017.

Chen, G., “Integrated Smart Structure Technologies for Automated Inspection and Preservation of Bridges on Mobile Platforms,” Presented at the 13th International Workshop on Advanced Smart Materials and Smart Structures Technology, University of Tokyo, Japan, July, 2017.

Chen, G., “A Strategic Framework to Extend Structural Health Monitoring into Bridge Management,” Presented at the World Transport Convention, Beijing, China, June, 2017.

Bao, Y., and Chen, G., “Distributed Fiber Optic Temperature Sensors and Data-enhanced Modeling of Steel Beams in Fire,” Presented at the 2017 SPIE Annual Symposium on Smart Structures/NDE, Portland, OR, March, 2017.

Qu, H., Li, T., Cain, J., and Chen, G., “Cable Fracture Detection with Acoustic Emission,” Presented at the 2017 SPIE Annual Symposium on Smart Structures/NDE, Portland, OR, March, 2017.

Chen, G., “Inspecting and Preserving Infrastructure through Robotic Exploration (INSPIRE),” Missouri Transportation Conference, Jefferson City, MO, February, 2017.

Tang, Y., Chen, Y., Li, Z., Guo, C., Fan, L., Hu, X., and Chen, G., “Smart Rock with Gravity-oriented Magnets for Remote Monitoring of Monitoring of Bridge Scour Process,” Presented in Session 517 on Bridge Scour and Curb Inlets at the 96th TRB Annual Meeting, Washington, D.C., January, 2017.

Chen, G., “Prediction of Bridge Scour Depth with a Smart Rock,” Presented in Workshop 891 on Sensing Technologies for Transportation Applications at the 96th TRB Annual Meeting, Washington, D.C., January, 2017.

Chen, G., “Robotics-based NDE for Bridge Inspection,” Presented in the AFF40 NDE Subcommittee Meeting at the 96th TRB Annual Meeting, Washington, D.C., January, 2017.

Chen, G., “Inspection and Preservation of Infrastructure with Aerial Robotics,” Presented in the AHD30 Committee Meeting at the 96th TRB Annual Meeting, Washington, D.C., January, 2017.

Chen, G., “Automated Inspection & Preservation of Bridges with Robots,” Hefei University of Technology, Anhui Sheng, China, July, 2017.

Chen, G., “Recent Development Trend on Intelligent Life-cycle Management of Transportation Infrastructure,” Zhejiang University, Zhejiang Sheng, China, July, 2017.

Chen, G., “Automated Inspection & Preservation of Bridges with Robots,” National Taiwan University, Taipei City, Taiwan, June, 2017.

Chen, G., “Automated Inspection & Preservation of Bridges with Robots,” Hunan University, Changsha Hunan, China, May, 2017.

Chen, G., “Automated Inspection and Preservation of Bridges with Robots,” Zhejiang University, Zhejiang Sheng, China, May, 2017.

Chen, G., “INSPIRE University Transportation Center – towards Automated Inspection and Preservation of Bridges,” Dalian University of Technology, Liaoning, China, February, 2017.

Chen, G.., “INSPIRE University Transportation Center – towards Automated Inspection and Preservation of Bridges,” Harbin Institute of Technology, Heilongjiang, China, February, 2017.

Chen, G., “Robotics-based Inspection and Preservation of Bridges and Tunnels,” Harbin Institute of Technology, Heilongjiang, China, February, 2017.

2017 Scholarly Productivity Report -- 21

CONFERENCE PRESENTATIONS (continued) ElGawady, M.A. Nain, M., Abdulazeez, M.A., and ElGawady, M.A., “Behavior of Concrete-filled Hybrid Large Rupture Strain FRP Tubes under Cyclic Axial Compression,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer.com/ chapter/10.1007/978-981-10-6713-6_34.

Abdulazeez, M.A., and ElGawady, M.A., “Seismic Performance of Hollow-core Composite Columns under Cyclic Loading,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer. com/chapter/10.1007/978-981-10-6713-6_53.

Gheni, A., and ElGawady, M.A., “Crumb Rubber as a Sustainable Aggregate in Chip Seal Pavement,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer.com/ chapter/10.1007/978-981-10-6713-6_39.

Gomaa, E., Sargon, S., Kashosi, C., and ElGawady, M.A., “Fresh Properties and Early Compressive Strength of Alkali-activated High Calcium Fly Ash Paste,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https://link.springer.com/ chapter/10.1007/978-981-10-6713-6_49.

Wang, S., and ElGawady, M.A., “Durability of Polyester-based GFRP Subjected to Hybrid Environmental and Mechanical Loads,” Congrès International de Géotechnique – Ouvrages – Structures, Ho Chi Minh City, Vietnam, October, 2017, https:// link.springer.com/chapter/10.1007/978-981-10-6713-6_42.

Anumolu, S., Abdelkarim, O.A., Abdulazeez, M.A., Gheni, A., and ElGawady, M.A., “Torsional Behavior of Hollow-core FRPconcrete-steel Bridge Columns,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Switzerland, September, 2017, https://www.empa.ch/smar/SMAR_2017_Proceedings/ papers/225.pdf.

Nain, M., Abdulazeez, M.A., and ElGawady, M.A., “Cyclic Compressive Behavior of Concrete-filled Hybrid Large Rupture Strain FRP Tubes,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Switzerland, September, 2017, https://www. empa.ch/smar/SMAR_2017_Proceedings/papers/221.pdf.

Abdulazeez, M.A., and ElGawady, M.A., “Nonlinear Analysis of Hollow-core Composite Building Columns,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Switzerland, September, 2017, https://www.empa.ch/smar/SMAR_2017_Proceedings/ papers/105.pdf.

22 -- 2017 Scholarly Productivity Report

Abdulazeez, M.A., and ElGawady, M.A., “Seismic Behavior of Precast Hollow-core FRP-concrete-steel Column having Socket Connection,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, Switzerland, September, 2017, https://www.empa.ch/smar/ SMAR_2017_Proceedings/papers/104.pdf.

Al-Jaberi, Z., Myers, J.J., and ElGawady, M.A., “Seismic Performance of Reinforced Masonry Walls Strengthened with FRCM Subjected to Cyclic Loading,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canada masonrydesigncentre.com/download/13th_symposium/ 020-Al-Jaberi-Paper-2.pdf.

Al-Jaberi, Z., Myers, J.J., and ElGawady, M.A., “Performance of Reinforced Masonry Walls Strengthened with FRP Composite Exposed to Combined Environmental Conditions,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canadamasonrydesigncentre.com/download/13th_ symposium/010-Al-Jaberi-Paper-1.pdf.

Hassanli, O., ElGawady, M.A., and Mills, J M., “Comparison of Available Expressions in Predicting the Flexural Strength of Self-centering Masonry Walls,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canada masonrydesigncentre.com/download/13th_symposium/ 173-Hassanli-Paper-1.pdf.

Gheni, A., ElGawady, M.A., and Myers, J.J., “Thermal Characterization of Concrete Masonry Units Manufactured using Recycled Tires as an Aggregate,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canada masonrydesigncentre.com/download/13th_symposium/ 056-Gheni-Paper-2.pdf.

Gheni, A., ElGawady, M.A., and Myers, J.J., “Cyclic Behavior of Concrete Masonry Units Manufactured with Recycled Tires as an Aggregate,” 13th Canadian Masonry Symposium, Halifax, Canada, June, 2017, http://canadamasonrydesigncentre.com/ download/13th_symposium/057-Gheni-Paper-3.pdf.

Moustafa, A., and ElGawady, M.A., “Seismic Behavior of a Damage-resistant Segmental Bridge Column with External Energy Dissipaters,” Transportation Research Board (TRB), Washington, D.C., January, 2017, http://amonline.trb.org/ 63532-trb-1.3393340/t003-1.3409998/377-1.3410213/ 17-04658-1.3410216/17-04658-1.3410217?qr=1.

Abdulazeez, M.A., Abdelkarim, O., Gheni, A., ElGawady, M.A., and Sanders, G., “Effects of Footing Connection on the Performance of Precast Hollow-core Fiber Reinforced Polymer-concrete-steel Columns,” Transportation Research Board (TRB), Washington, D.C., January, 2017, http://amonline.trb.org/63532-trb-1.3393340/ t003-1.3409998/220-1.3410412/17-01256-1.3400341/17-012561.3410422?qr=1.

Wang, S., and ElGawady, M.A., “Combined Seawater Exposure and Axial Cyclic Load Behavior of Concrete-filled FRP Tube (CFFT),” 16th World Conference Earthquake Engineering, Santiago, Chile, January, 2017, https://invenio.itam.cas.cz/ record/20000?ln=en.

Al-Jaberi, Z., Myers, J.J., and ElGawady, M.A., “Effectiveness of FRCM System in Strengthening Reinforced Masonry Walls Subjected to Cyclic Loading,” 39th IABSE Symposium, Vancouver, Canada, 2017, http://www.ingentaconnect.com/ contentone/iabse/report/2017/00000109/00000039/art00001.

Feys, D. Sonebi, M., and Feys, D., “Overview of RILEM TC-266: Measuring Rheological Properties of Cement-based Materials,” ACI Spring Convention, Detroit, MI, March, 2017.

Feys, D., and Sonebi, M., “Future Challenges in SCC Rheology,” ACI Spring Convention, Detroit, MI, March, 2017.

Vosahlik, J., Feys, D., and Riding, K., “Lubrication Layer Characterization to Optimize and Predict Pumping Performance of Self-consolidating Concrete Mixtures,” ACI Spring Convention, Detroit, MI, March, 2017.

Asghari, A.A., Feys, D., and De Schutter, G., “Sensitivity of Workability Loss of Flowable Cement Paste to Small Changes in Consituent Elements and Mixing Procedure,” ACERS Cements Division Conference, Atlanta, GA, June, 2017.

Lunkad, P., and Feys, D., “Study of the Thixotropic Behavior of Fresh Cement Paste Modified with Micro- and Nano-sized Materials/Particles,” ACERS Cements Division Conference, Atlanta, GA, June, 2017.

Ley Hernandez, A.M., Feys, D., and Kumar, A., “The Role of W/CM on the Early Age Hydrating Kinetics of Cement Paste,” ACERS Cements Division Conference, Atlanta, GA, June, 2017.

Hu, X., “Building a Connected Mobility Management and Analytics-centered Smarter Transportation System,” University of Missouri, Columbia, MO, September, 2017.

Hu, X., “Building a Connected Mobility Management and Analytics-centered Smarter Transportation System,” St. Louis University, St. Louis, MO, December, 2017.

Khayat, K.H. Kumar, A., Lunkad, P., Khayat, K.H., and Meng, W., “Influence of Silica Fume and PCE Dispersant on Hydration Mechanisms of Cement,” ACI Fall Convention, Anaheim, CA, October, 2017.

Wu, Z. Khayat, K.H., and Shi, C., “Multi-investigation on the Effect of Nano-CaCO3 Particles on Performance of Ultra-high Performance Concrete,” Proceedings 10th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete (ICCM2017), Montreal, Canada, October, 2017.

Libre, N.A. Skyles, S.A., and Libre, N.A., “Computer-assisted Grading System for Large Section Classes,” Teaching and Learning Technology Conference, Missouri University of Science and Technology, Rolla, MO, March, 2017.

Libre, N.A., “How to Preserve Classroom Created Information; an Innovative Approach,” Teaching and Learning Technology Conference, Missouri University of Science and Technology, Rolla, MO, March, 2017.

Libre, N.A., “Implementing Active Learning in STEM-based Curriculum,” Teaching and Learning Technology Conference, Missouri University of Science and Technology, Rolla, MO, March, 2017.

Galvez-Moreno, D., and Feys, D., “Particle Size Distribution of the Lubrication Layer of Highly Workable Concrete,” ACERS Cements Division Conference, Atlanta, GA, June, 2017.

Libre, N.A., “Practical Tools to Accelerate Student Learning and Save Grading Time,” Center for Educational Research and Teaching Innovation (CERTI), Missouri University of Science and Technology, Rolla, MO, April, 2017.

Hu, X.

Krueger, M., Bloom, K., and Libre, N.A., “A Look into Technology Rich Courses from Student’s View Point,” ASEE Midwest Section Conference, Stillwater, OK, September, 2017.

Yu, X., Gao, S., Park, H., and Hu, X., “Multi-cycle Optimal Taxi Routing with E-hailing,” Institute for Operations Research and the Management Sciences (INFORMS) Annual Meeting, Houston, TX, November, 2017.

Hu, X., and Adu-Gyamfi, Y., “Building a University of Missouri System Transportation Big Data Cloud Platform,” Transportation Infrastructure Conference, Rolla, MO, December, 2017.

Hu, X., “Pay-As-You-Drive-And-You-Save (PAYDAYS) Insurance Actuarial Study,” Missouri Traffic Blueprint Conference, Columbia, MO, September, 2017.

Libre, N.A., Jennings, J.W., and Skyles, S.A., “A Look at an Active Learning Strategies for Deeper Understanding: A Case Study in Mechanics of Materials,” ASEE Midwest Section Conference, Stillwater, OK, September, 2017.

Libre, N.A., “SecPro App as an Educational Tool for Teaching Engineering Mechanics,” ASEE Midwest Section Conference, Stillwater, OK, September, 2017.

Libre, N.A., “Incorporation of Interactive eBook in Teaching STEM Courses,” Focus on Teaching and Technology Conference, St. Louis, MO, September, 2017.

2017 Scholarly Productivity Report -- 23

CONFERENCE PRESENTATIONS (continued) Liu, J. Liu, J., “Low Temperature Cracking Analysis of Asphalt Binders and Mixtures,” Transportation Infrastructure Conference, Missouri University of Science and Technology, Rolla, MO, December, 2017.

Liu, J., “Field Evaluation of Precutting Technique for Maintaining AC Pavements with Thermal Cracking,” ASCE Congress on Technical Advancement, Duluth, MN, September, 2017.

Liu, J., “Field Evaluation of Precutting Technique for Maintaining AC Pavements with Thermal Cracking,” CESTiCC 2017 Summer Workshop, Pullman, WA, August, 2017.

Liu, J., “Recycling in Alaska’s Transportation Infrastructure,” 2nd International Conference on Transportation Infrastructure and Materials, Qingdao, China, June 2017.

Liu, J., “Influence of Water Access Condition during Freezing on the Resilient Behavior of Alaskan Based Course Materials,” Transportation Research Congress 2017, Beijing, China, May, 2017.

Liu, J., “Materials Adaptation to Climate Change and Extreme Events: Case Studies,” 1st International Workshop on Sustainability Innovation in Transportation Infrastructure, Knoxville, TN, March, 2017.

Myers, J.J., “Evaluation of FRP and FRCM Composites for the Strengthening of Reinforced Masonry Walls,” American Concrete Institute (ACI) 2017 Fall Conference, Anaheim, CA, October, 2017, (Co-presenter).

Myers, J.J., “Non-prestressed Composite Bridge Deck-girder with End-girder Continuity Detail using UHPC within the End Connection,” 3rd International Symposium on Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC) Montpellier, France, October, 2017.

Myers, J.J., “Optimization Performance of High Volume Fly Ash Self-consolidating Mixtures with Hydrated Lime (Mortar Component),” 10th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete (ICCMC 2017) Montreal, Quebec, Canada, October, 2017.

Myers, J.J., “Effectiveness of FRCM System in Strengthening Reinforced Masonry Walls Subjected to Cyclic Loading,” 39th International Association of Bridge and Structural Engineering (IABSE 2017), Vancouver, British Columbia, Canada, September, 2017.

Myers, J.J., “Flexural Performance of Two-way Concrete Slabs Reinforced with Carbon Fiber Grid,” 39th International Association of Bridge and Structural Engineering (IABSE 2017), Vancouver, British Columbia, Canada, September, 2017.

Liu, J., “Low Temperature Cracking Analysis of Asphalt Binders and Mixtures,” The 96th TRB Annual Meeting, Washington, D.C., January, 2017.

Liu, J., “Critical Low Temperature, from Asphalt Binder to Mixture,” 7th IACIP Annual Workshop, Washington D.C., January, 2017.

Mendoza, C. Mendoza, C., “Turbulent Flow Forcing for Contaminant Migration Through a Porous Streambed,” Laboratorio Hidraulico – Las Flores (MOP) – Universidad del Norte, Barranquilla (Colombia), July 18, 2017.

Myers, J.J. Myers, J.J., “Diagnostic Test for Load Rating of a Prestressed SCC Bridge,” American Concrete Institute (ACI) 2017 Fall Conference, Anaheim, CA, October, 2017, (Co-presenter).

Myers, J.J., “Bond Performance of Eco-friendly Self-consolidating Concrete (Concrete with 70% Cement Replacement),” American Concrete Institute (ACI) 2017 Fall Conference, Anaheim, CA, October, 2017, (Co-presenter).

24 -- 2017 Scholarly Productivity Report

THIRD PLACE S&T’s highest finish since the competition started in 2003

Missouri S&T PCI Big Beam Team Eli Hernandez and Hayder Alghazali pictured with the team's advisor, Dr. John Myers

Myers, J.J., “Dynamic Load Allowance of a Prestressed Concrete Bridge through Load Field Tests,” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR 2017), Zurich, Switzerland, September 15, 2017.

Myers, J.J., “Evaluation of Strains and Stresses of Prestressed Girders for Bridge A7957, Missouri, USA (Field Study),” 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR 2017), Zurich, Switzerland, September, 2017.

Myers, J.J., “Experimental Investigation on Anchorage Systems for Enhancing the Mechanical Performance of FRCM Composites in Retrofitting RC Structural Beams,” 8th International Conference on Advanced Composites in Construction (ACIC 2017), Sheffield, England, United Kingdom, September, 2017.

Myers, J.J., “Durability of Extracted In-service GFRP Bars in RC Subjected to Field Exposure,” 8th International Conference on Advanced Composites in Construction (ACIC 2017), Sheffield, England, United Kingdom, September, 2017.

Myers, J.J., “Environmental Effects on the Durability Performance of FRCM Composite Bonded to Concrete,” 5th International Conference on Durability of Fibre Reinforced Polymer (FRP) Composites for Construction & Rehabilitation of Structures (CDCC 2017), Sherbrooke, Quebec, Canada, July, 2017.

Myers, J.J., “Bond Performance of SRP-to-Concrete Subjected to Environmental Cycling and Sustained Loading,” 5th International Conference on Durability of Fibre Reinforced Polymer (FRP) Composites for Construction & Rehabilitation of Structures (CDCC 2017), Sherbrooke, Quebec, Canada, July, 2017.

Myers, J.J., “Thermal Characterization of Concrete Masonry Units Manufactured Using Recycled Tires as an Aggregate,” 13th Canadian Masonry Symposium (13 CMS), Halifax, Nova Scotia, Canada, June, 2017.

Myers, J.J., “Cyclic Behavior of Concrete Masonry Units Manufactured with Recycled Tires as an Aggregate,” 13th Canadian Masonry Symposium (13 CMS), Halifax, Nova Scotia, Canada, June, 2017.

Myers, J.J., “Performance of Reinforced Masonry Walls Strengthened with FRP Composite Exposed to Harsh Environmental Conditions,” 13th Canadian Masonry Symposium (13 CMS), Halifax, Nova Scotia, Canada, June, 2017.

Myers, J.J., “Long-term Durability of GFRP Internal Reinforced Concrete Structures,” American Concrete Institute (ACI) 2017 Spring Conference, Detroit, MI, March, 2017, (Co-presenter).

Myers, J.J., “Evaluation of Prestress Losses for Bridge A7957 Constructed with High Strength Concrete (Field Study),” Prestressed-Precast Concrete Institute (PCI) 2017 Convention and National Bridge Conference, Cleveland, OH, March, 2017, (Co-presenter).

Oerther, D.B. Oerther, D.B., “Environmental Health Engineering?” Alumni Thematic International Exchange Seminars, US Department of State, Atlanta, GA, February, 2017.

Oerther, D.B., “Leadership in Higher Education,” Guest Speaker for ‘Education Day’ for Leadership Phelps County, Rolla, MO, April, 2017.

Oerther, D.B., “Using Nursing Theory to Improve the Teaching of Engineering Practice,” 124th Annual Conference and Exposition of the American Society for Engineering Education, Columbus, OH, June, 2017.

Oerther, D.B., “Reducing Costs While Maintaining Learning Outcomes Using Blended, Flipped, and Mastery Pedagogy to Teach Introduction to Environmental Engineering,” 124th Annual Conference and Exposition of the American Society for Engineering Education, Columbus, OH, June, 2017.

Oerther, D.B., “Diplomacy Lab Provides Term-length, Group Projects Integrating Policy Analysis and Liberal Arts into the Traditional Engineering Classroom,” 124th Annual Conference and Exposition of the American Society for Engineering Education, Columbus, OH, June, 2017.

Oerther, D.B., “A Collage of Pecha Kucha: Vision, Leadership, Research, and Teaching,” Department of Civil, Construction, and Environmental Engineering, Iowa State University, Ames, IO, October, 2017.

Oerther, D.B., “Using Diplomacy Lab to Teach Interdisciplinary Students About Global Public Health,” 44th Biennial Convention of Sigma Theta Tau, the International Honor Society of Nursing, Indianapolis, IN, October, 2017.

Richardson, D.N.

Myers, J.J., “Seismic Performance of Reinforced Masonry Walls Strengthened with FRMC Subjected to Cyclic Loading,” 13th Canadian Masonry Symposium (13 CMS), Halifax, Nova Scotia, Canada, June, 2017.

Richardson, D.N., “New ACI Mixture Design Method for Paving Concrete,” Missouri Concrete Conference, Rolla, MO, June, 2017.

Myers, J.J., “Behavior of Full-scale Damaged Beams Repaired with SRP,” American Concrete Institute (ACI) 2017 Spring Conference, Detroit, MI, March, 2017.

Schonberg, W.P.

Myers, J.J., “Self-consolidating Concrete with 70 Percent Cement Replacement,” American Concrete Institute (ACI) 2017 Spring Conference, Detroit, MI, March, 2017, (Co-presenter).

Schonberg, W.P., “Rupture of Cryogenic Fuel Tanks and Other HVI Studies,” The 2017 Hyper-velocity Impact Symposium, Canterbury, Kent, England, April, 2017.

2017 Scholarly Productivity Report -- 25

CONFERENCE PRESENTATIONS (continued) Schonberg, W.P., “Engineering Ethics and Professionalism,” Chemical Engineering Department Seminar Series, Missouri University of Science and Technology, Rolla, MO, February, 2017.

Wu, C., Huang R., and Liechti K., “Determining Interfacial Behaviors using Nanoindentation,” Society of Experimental Mechanics, Annual Meeting, Indianapolis, IN, June, 2017.

Sneed, L.H.

Wu, C., Huang R., and Liechti K., “Characterizing Tractionseparation Relations of Thin Films using Far-field Measurements,” Society of Experimental Mechanics, Annual Meeting, Indianapolis, IN, June, 2017.

Carloni, C., Santandrea, M., Ravazdezh, F., and Sneed, L.H., “Stress-strain Response of Steel-FRP Confined Concrete Columns Determined by DIC,” SMAR 2017 – Fourth Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Zurich, Switzerland, September, 2017.

Faleschini, F., Gonzalez-Libreros, J.H., Hofer, L., Sneed, L.H., and Pellegrino, C., “Experimental Behavior of a Severely Damaged RC Beam-column Joint Strengthened with FRCM Composites,” SMAR 2017 – Fourth Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Zurich, Switzerland, September, 2017.

Gonzalez-Libreros, J.H., D’Antino, T., Sneed, L.H., Pellegrino, C., and Giacomin, G., “Transversal Reinforcement Interaction in RC Beams Strengthened in Shear with Externally Bonded Composites,” SMAR 2017 – Fourth Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Zurich, Switzerland, September, 2017.

Gonzalez-Libreros, J.H., Pellegrino, C., D’Antino, T., and Sneed, L.H., “Evaluation of External Transversal Reinforcement Strains of RC Beams Strengthened in Shear with FRCM Composites,” Advanced Composites in Construction (ACIC) 2017, University of Sheffield, UK, September, 2017.

Wu, C., Huang R., and Liechti K., “Determining Tractionseparation Relations of Thin Films,” Society of Engineering Science, Annual Meeting, Boston, MA, July, 2017.

Wu, C., Huang R., and Liechti K., “Interfacial Failure of Through Silicon Via in 3D Integration,” Society of Engineering Science, Annual Meeting, Boston, MA, July, 2017.

Wu, C., Huang R., and Liechti K., “Visualizing Interfacial Fracture of Thin Films,” ASME-IMECE Conference, Tampa, FL, November, 2017.

Wu, C., Huang R., and Liechti K., “Nanoindentations on Through Silicon Vias,” ASME-IMECE Conference, Tampa, FL, November, 2017.

Yan, G.R. Yuan, F.P., Yan, G.R., Honerkamp, R., and Isaac, K.M., “Numerical Simulation of Tornado-like Flow in a Laboratory-scale Ward-type Simulator,” 13th Americas Conference on Wind Engineering, Gainesville, FL, May, 2017.

Wang, J.

Zhao, Y., Yan, G.R., and Feng R.Q., “Improvement of Tornado Simulation by Adjusting Boundary Conditions,” 13th Americas Conference on Wind Engineering, Gainesville, FL, May, 2017.

Huang, C.P., Wang, J., and Park, S.W., “Surface Complex Formation between Heavy Metal Ions and Sludge Particulates,” 254th ACS National Meeting, Washington, D.C., August, 2017, (Oral presentation).

Zhang, X.

Wang, J., “Why Should We Promote Low DO Aeration?”

Invited by: (a) Research Center for Eco-Environmental Sciences (June 2017); (b) Shanghai University (June 2017).

Wu, C. Wu, C., Huang R., and Liechti K., “Sliding of TSV/Si Interfaces,” 40th Annual Adhesion Society Conference, St. Petersburg, FL, February, 2017.

Wu, C., Huang R., and Liechti K., “Direct Extraction of Mixedmode Traction-separation Relations,” 40th Annual Adhesion Society Conference, St. Petersburg, FL, February, 2017.

26 -- 2017 Scholarly Productivity Report

Zhang, X., “Use of Wicking Fabric to Prevent Frost Boils in Alaskan Pavements,” ASCE Congress on Technical Advancement, Duluth, MN, September, 2017.

Zhang, X., “Rational Selection of the Model Parameters in the Barcelona Basic Model,” Transportation Research Congress 2017, Beijing, China, May, 2017.

Zhang, X., “Short Course on Rapid Characterization and Modelling of Unsaturated Soils,” PanAm-UNSAT, Dallas, TX, November, 2017.

CONTRACTS & GRANTS Burken, J.G. Burken, J.G. (PI), Kim, C.-S. (CoPI), Mendoza, C. (CoPI), Yin, Z. (CoPI), and Baker, D. (CoPI), “Cellphone-enabled Water Citizen Science for Data and Knowledge Generation: WatCiSci,” NSF Division of Chemical, Biological, Environmental, November 2017 to October 2018; $72,047.

Burken, J.G. (PI), “International Phytotechnologies Scholars Program Preparing Next Generation Global Leaders in Our Profession,” NIH National Institute of Environmental Health, September 2017 to August 2018; $13,500.

Burken, J.G. (PI), and Shi, H. (CoPI), “Collaborative Data Assessment & Phytoforensic Analysis for Organic Leachate Pollutants,” US Forestry Service, September 2016 to July 2021; $33,424.

Burken, J.G. (PI), and Shi, H. (CoPI), “Collaborative Data Assessment & Phytoforensic Analysis for Organic Leachate Pollutants,” US Forestry Service, September 2016 to July 2021; $167,000.

Burken, J.G. (PI), and Liu, W. (CoPI), “Site Assessment for Alice Street: Data Assessment and Phytoforensic Analysis for Hydrocarbon Pollutants,” University of Guelph, July 2017 to December 2017; $17,050.

Chen, G. Chen, G. (PI), ElGawady, M.A. (CoPI), Ma, H. (CoPI), Myers, J.J. (CoPI), Sneed, L.H. (CoPI), Zoughi, R. (Co-PI), Long, S.K. (CoPI), Qin, R. (CoPI), and Yin, Z. (CoPI), “Inspecting and Preserving Infrastructure through Robotic Exploration,” Department of Transportation, November 2016 to September 2022, Year 1; $1,402,200 (Parent grant, sub-awards listed).

Chen, G. (PI), ElGawady, M.A. (CoPI), Ma, H. (CoPI), Myers, J.J. (CoPI), Sneed, L.H. (CoPI), Zoughi, R. (Co-PI), Long, S.K. (CoPI), Qin, R. (CoPI), and Yin, Z. (CoPI), “Inspecting and Preserving Infrastructure

through Robotic Exploration,” Department of Transportation, November 2016 to September 2022, Year 2; $1,416,899 (Parent grant, sub-awards listed).

Chen, G. (PI), “INSPIRE: UAV-enabled Measurements for Spatial Magnetic Field of Smart Rocks in Bridge Scour Monitoring,” Department of Transportation, March 2017 to July 2018, Year 1; $162,361 (Sub-award).

Chen, G. (PI), “INSPIRE: UAV-enabled Measurements for Spatial Magnetic Field of Smart Rocks in Bridge Scour Monitoring,” Department of Transportation, March 2017 to July 2018, Year 2; $81,136 (Sub-award).

Chen, G. (PI), “INSPIRE: In-line Long period Grating and Brillouin Scattering Fiber Optic Sensors for Strain, Temperature, Chloride Concentration and Steel Mass Loss Measurement in Bridge Applications,” Department of Transportation, March 2017 to July 2018, Year 1; $76,035 (Sub-award).

Chen, G. (PI), “INSPIRE: In-line Long Period Grating and Brillouin Scattering Fiber Optic Sensors for Strain, Temperature, Chloride Concentration and Steel Mass Loss Measurement in Bridge Applications,” Department of Transportation, March 2017 to July 2018, Year 2; $38,049 (Sub-award).

Chen, G. (PI), and Ma, H. (CoPI), “INSPIRE: Hyperspectral Image Analysis for Mechanical and Chemical Properties of Concrete and Steel Surfaces,” Department of Transportation, March 2017 to July 2018, Year 1; $82,936 (Sub-award).

Chen, G. (PI), and Ma, H. (CoPI), “INSPIRE: Hyperspectral Image Analysis for Mechanical and Chemical Properties of Concrete and Steel Surfaces,” Department of Transportation, March 2017 to July 2018, Year 2; $41,464 (Sub-award).

Chen, G. (PI), “Mid-America Transportation Center – Missouri S&T Partner,” University of Nebraska-Lincoln, December 2016 to December 2017; $464,935 (Parent grant, sub-awards listed).

Chen, G. (PI), “Sensor-assisted Condition Evaluation of Steel and Prestressed Concrete Girder Bridges Subjected to Fire-Phase 1,” University of NebraskaLincoln, August 2017 to December 2018; $76,164.

Chen, G. (PI), “SMART Shear Keys for Multi-hazards Mitigation of Diaphragmfree Girder Bridges-Phase 1,” University of Nebraska-Lincoln, August 2017 to December 2018; $80,566.

Deng, W. Deng, W. (PI), “Pore-scale Study of Seismic Stimulation for Enhanced Oil Recovery,” China TOPRS Tech Co. LTD, September 2016 to August 2017; $12,000.

ElGawady, M.A. ElGawady, M.A. (PI), “Physico-mechanical Assessment of Using Scrap Tires as an Aggregate in Concrete Masonry Unites,” Missouri Department of Natural Resources, July 2017 to June 2019; $210,604.

ElGawady, M.A. (PI), “Performance of 100% Fly Ash Concrete for Infrastructure Construction,” Missouri Department of Natural Resources, July 2017 to June 2019; $219,291.

ElGawady, M.A. (PI), and Schonberg, W.P. (CoPI), “Field Implementation of Rubberized Chip Seal,” Missouri Department of Transportation, July 2017 to December 2018; $54,167.

ElGawady, M.A. (PI), and Schonberg, W.P. (CoPI), “Assessment and Repair of Corroded Steel H-piles,” Missouri Department of Transportation, December 2017 to July 2020; $227,498.

2017 Scholarly Productivity Report -- 27

CONTRACTS (continued) ElGawady, M.A. (PI), “Using Scrap Tires as an Aggregate in Infrastructure – Phase II,” Missouri Department of Natural Resources, October 2017 to October 2018; $226,820.

ElGawady, M.A. (PI), “Behavior of Corroded Steel H-piles – Phase I,” University of Nebraska-Lincoln, August 2017 to December 2018; $95,756 (Sub-award).

Feys, D. Feys, D. (PI), “RE-CAST: Changes in Workability and Air-void System of Concrete Due to Pumping,” Department of Transportation, May 2015 to May 2018; $87,228.

Feys, D. (PI), “RE-CAST: Changes in Workability and Air-void System of Concrete Due to Pumping,” May 2015 to June 2018, Continuation; $59,401.

Feys, D. (PI), “Understanding Early Age Behavior of Cement: Rheology and Hydration Kinetics of Pure C3S and C3A,” UM Research Board, August 2017 to July 2018; $46,306.

Feys, D. (PI), “Feasibility of Anton Paar MCR 302 to Determine the Theological Properties of Plaster Paste and Mortar,” Maxxon Corporation, July 2017 to July 2018; $1,000.

Feys, D. (PI), “Minimizing the Effect of Pumping on SCC Workability and Freeze-thaw Durability,” American Concrete Institute, July 2017 to December 2018; $50,000.

Fitch, M. Fitch, M. (PI), Dunn Norman, S. (CoPI), Forciniti, D. (CoPI), Ludlow, D.K. (CoPI), Smith, J.D. (CoPI), Erickson, K.T. (CoPI), Stanley, R.J. (CoPI), Raper, S.A. (CoPI), and Hofer, V.J. (CoPI), “Collaboration in the Development of Programs in the New GUST College of Engineering,” Gulf University for Science and Technology, October 2017 to October 2018; $339,840.

28 -- 2017 Scholarly Productivity Report

Khayat, K.H. Khayat, K.H. (PI), “MoDOT: Implementation of FR Self-consolidating Concrete for Repair of Bridge Substructures and FR Super-workable Concrete for Infrastructure Construction,” Missouri Department of Transportation, July 2017 to July 2018; $24,828.

Khayat, K.H. (PI), “MoDOT: Field Implementation and Monitoring of Behavior of Economical and Crack-free High-performance Concrete for Pavement and Transportation Infrastructure Constructions – Phase II,” Missouri Department of Transportation, July 2017 to June 2018; $29,687.

Khayat, K.H. (PI), “MoDOT: Field Implementation of High-volume Recycled Materials for Sustainable Pavement Construction,” Missouri Department of Transportation, July 2017 to June 2018; $29,687.

Khayat, K.H. (PI), “MoDOT: Performancebased Specifications of Fiber-reinforced Concrete with Adapted Pheology to Enhance Performance and Reduced Steel-reinforcement in Structural Members,” Missouri Department of Transportation, December 2017 to January 2019; $89,999.

LaBoube, R. LaBoube, R. (PI), “SDI Sponsorship of CCFSS,” Steel Deck Institute, January 2017 to December 2017; $5,000.

LaBoube, R. (PI), “RMI Sponsorship of CCFSS,” Rack Manufacturers Institute, Inc., January 2017 to December 2017; $5,000.

LaBoube, R. (PI), “AISI Sponsorship of CCFSS,” American Iron and Steel Institute, January 2017 to December 2017; $52,500.

LaBoube, R. (PI), “Wei-Wen Yu Center for Cold-formed Steel Structures,” Steel Framing Industry Association, January 2017 to December 2017; $5,000.

LaBoube, R. (PI), “Wei-Wen Yu Center for Cold-formed Steel Structures,” Metal Construction Association, January 2017 to December 2017; $5,000.

LaBoube, R. (PI), “Wei-Wen Yu Center for Cold-formed Steel Structures, Metal Building Manufacturers Association, January 2017 to December 2017; $5,000.

LaBoube, R. (PI), “CFSEI Sponsorship of CCFSS,” Cold-Formed Steel Engineers Institute, January 2017 to December 2017; $5,000.

Liu, J. Liu, J. (PI), “CESTiCC Projects: #1616, #1617, #1618,” University of Alaska, May 2017 to September 2018; $410,653.

Lusher, S.M. Lusher, S.M. (PI), “Guayule Plant Extracts as Recycling Agents in Hot Mix Asphalt with High Reclaimed Binder Content: An Experimental Paving Project,” Department of Agriculture, June 2017 to June 2018; $32,000.

Ma, H. Ma, H. (PI), and Kumar, A. (CoPI), “A Thermo-kinetic Approach to Enhance the Use of Clays in Concrete,” NSF Division of Civil, Mechanical & Manufacturing Innovation, July 2017 to June 2020; $393,948.

Myers, J.J. Myers, J.J. (PI), “RE-CAST: Strengthening and Repair of Structural Concrete with a Fabric-reinforced-cementitous-matrix (FRCM): Laboratory Studies and Field Implementation,” Department of Transportation, June 2014 to June 2018; $95,784.

Myers, J.J. (PI), “RE-CAST/Durability of GFRP Bar Reinforcement Extracted from In-service Concrete Structures,” Department of Transportation, January 2017 to June 2018; $63,862.

(continued on page 30)

HONORS & AWARDS Burken, J.G., Fellow – Association of Environmental Engineering and Science Professors (AEESP), Class of 2016 – Presented at AEESP Biannual meeting July, 2017.

Baur, S.W., Provost eFellows Grant – $5K, 2017.

Chen, G., Member of Taishan Forum on Civil Engineering Research & Education, “Efficacy of Post-mainshock FRP/Steel Repaired RC Bridge Columns Subjected to Aftershocks,” Shangdong Jianzhu University, Jinan, Shangdong Province, China, November, 2017.

ElGawady, M.A., Faculty Excellence Award, Missouri University of Science and Technology, 2017.

Gillis, W., Excellence in Service to Students Award – The National Society of Leadership and Success, 2017.

Gillis, W., Diversity in Leadership – Leadership and Cultural Programs, 2017.

Gillis, W., Professor Appreciation Award – Chi Epsilon, 2017.

Hu, X., Recipient of Center for Advancing Faculty Excellence (CAFE) Professional Development Fund, 2017.

Khayat, K.H., Appointed Member of the Inaugural Editorial Board for the Materials Journal of the American Concrete Institute, 2017.

Liu, J., Certificate of Invited Speaker, International Conference on Transportation Infrastructure and Materials, 2017.

Liu, J., Certificate of Invited Speaker, International Conference on Transportation Infrastructure and Materials, 2017.

Zhao, S. and Liu, J., Best Paper Award, “Recycling in Alaska’s Transportation Infrastructure,” Transportation Research Congress, 2017.

Liu, J., Associate Editor, ASCE Journal of Transportation Engineering Part B: Pavements, 2017.

Libre, N.A., Faculty Teaching and Service Achievement Award, Joseph H. Senne, Jr., Academy of Civil Engineers, Rolla, MO, 2017.

Libre, N.A., 1st Place Award for Active Learning Video Competition, Presented at the Teaching and Learning Technology Conference, Missouri University of Science and Technology, Rolla, MO, 2017.

Khayat, K.H., 2017 ACI Foundation Jean-Claude Roumain Innovation in Concrete Award, “for over 25 years of research, teaching, innovation, and leadership contributing to the advancement of self-consolidating concrete; and the relentless pursuit of knowledge transfer by organizing numerous conferences covering the science, performance, design, and testing standards of self-consolidating concrete” Presented at ACI Spring Concrete Convention and Exposition, March, 2017.

Krueger, M., Bloom, K., Libre, N.A., Outstanding Technical Poster, 2nd place, American Society for Engineering Education, Presented at the ASEE Midwest Section Conference, Stillwater, OK, 2017.

Khayat, K.H., Marquise Who’s Who in the World 2017 (Science & Engineering in America), 2017.

Ma, H., Highly Cited Paper recognition, “Steel Corrosion in Magnesium-phosphate Cement Concrete,” Magazine of Concrete Research, Vol. 69, No. 1, pp. 35-45, 2017, Web of Science, 2017.

Ma, H., ExCEEd Fellow, American Society of Civil Engineers, June, 2017.

Ma, H., NSF Traveling Support Award Recipient, to attend NSF Workshop on Additive Manufacturing for Civil Infrastructure Design and Construction, July, 2017.

Ma, H., Highly Cited Paper recognition, “Realistic Pore Structure of Portland Cement Paste: Experimental Study and Numerical Simulation,” Computers and Concrete, Vol. 11, No. 4, pp. 317-336, Web of Science, 2017.

Ma, H., Outstanding Reviewer, Cement and Concrete Research, 2017.

Ma, H., Outstanding Reviewer, Materials Letters, 2017.

Myers, J.J., Chi Epsilon Honor Society Chapter Honor Member – Received Chi Epsilon Civil Engineering Honor Society Beta Chapter Honor Member Recognition, April, 2017.

Myers, J.J., Inaugural Joseph H. Senne, Jr. Academy of Civil Engineers Faculty Scholarly Achievement Award – Missouri S&T Academy of Civil Engineers Presented April, 2017.

Myers, J.J., AEI Outstanding Educator Award – Received Society Outstanding Educator award recognition April, 2017, in Oklahoma City, OK at the AEI Conference.

Myers, J.J., Appointed Member of the Editorial Board for the Sustainability Journal, Basel, Switzerland, 2017.

Myers, J.J., Appointed Chair The Masonry Society (TMS) Research Committee, Longmont, CO, 2017.

Myers, J.J., Appointed Vice Chair Precast-Prestressed Concrete Institute (PCI) Journal Awards Committee, Chicago, IL, 2017.

Oerther, D.B., Associate Editor, Journal of Water Environment Research, Water Environment Federation, 2017.

Oerther, D.B., Associate Editor, Journal of Environmental Engineering, American Society of Civil Engineers, 2017.

2017 Scholarly Productivity Report -- 29

photo by Sam O'Keefe/ Missouri S&T

CONTRACTS (continued) Sneed, L.H. Sneed, L.H. (PI), and Feys, D. (CoPI), “Examination of Shear Friction Design Provisions,” Precast/Prestressed Concrete Institute, April 2017 to May 2018; $35,000.

Sneed, L.H. (PI), “Rapid Repair of Earthquake-damaged Reinforced Concrete Bridges,” University of Nebraska-Lincoln, August 2017 to December 2018; $65,190 (Sub-award).

Yan, G. Yan, G. (PI), “Experimental Program to Stimulate Competitive Research (EPSCoR)-Research Infrastructure Development (RID),” NASA Goddard Space Flight Center, October 2017 to May 2018; $10,000.

Zhang, X. Zhang, X. (PI), “Slope Instrumentation and Development of a Landslide Warning System,” University of Hawaii, February 2017 to August 2018; $25,000.

Zhang, X. (PI), “Extended Monitoring Performance of H2Ri Wicking Fabric at the Beaver Slide Test Secton of the Dalton Highway-On Campus,” Nicolon Corporation, May 2017 to February 2021; $66,694.

Zhang, X. (PI), “Extended Monitoring Performance of H2Ri Wicking Fabric at the Beaver Slide Test Section of the Dalton Highway-Off Campus,” Nicolon Corporation, May 2017 to February 2021; $63,856.

Zhang, X. (PI), “CESTiCC Projects: #1508, #1509, #1619,” University of Alaska, May 2017 to May 2018; $211,382.

Zhang, X. (PI), “Use of Wicking Fabric to Remove Capillary Water in Road Embankment,” GeoSynthetic Institute, August 2017 to May 2018, $5,000.

30 -- 2017 Scholarly Productivity Report

Dr. Lesley Sneed

Faculty Excellence Award

HONORS & AWARDS (continued) Oerther, D.B., Elected Treasurer, American Academy of Environmental Engineers and Scientists, 2017.

Oerther, D.B., Elected Program Chair, American Society for Engineering Education, 2017.

Oerther, D.B., Elected Certified Environmental Professional by Eminence, Academy of Board Certified Environmental Professionals, 2017.

Oerther, D.B., Elected Certified Environmental Health Specialist, Board of Registration of the Missouri Environmental Health Association, 2017.

Oerther, D.B., Elected Diplomat, American Academy of Sanitarians, 2017.

Oerther, D.B., Elected Chartered Engineer, Engineering Council of the United Kingdom, 2017.

Oerther, D.B., Elected Chartered Environmentalist, Society for the Environment, 2017.

Oerther, D.B., Elected Fellow, Royal Society of Arts, 2017.

Oerther, D.B., Elected Fellow, Royal Society for Public Health, 2017.

Oerther, D.B., Invited Participant Global Entrepreneurship Summit in Hyderabad, India, US Department of State and Government of India, 2017.

Oerther, D.B., Invited Participant, Alumni Thematic International Exchange Seminars (Alumni TIES), “The New Frontiers of Global Public Health,” US Department of State, 2017.

Oerther, D.B., President’s Award for Cross-Cultural Engagement, University of Missouri System, 2017.

Oerther, D.B., The Frederick George Pohland Medal, Environmental Engineering and Science Foundation, 2017.

Richardson, D.N., Alumni Merit Award, Miner Alumni Association, 2017.

Schonberg, W.P., Elected President, Hypervelocity Impact Society (international), 2017-2019 Term.

Sneed, L.H., 2016 Faculty Excellence Award, Missouri University of Science and Technology, 2017.

Sneed, L.H., Precast/Prestressed Concrete Institute (PCI) Daniel P. Jenny Research Fellowship, 2017-2018.

Sneed, L.H., Visiting Professor, University of Bologna, Italy, June 2017 – July 2017.

Zhang, X., Certificate of Invited Speaker, International Conference on Transportation Infrastructure and Materials, Qingdao, China, 2017.

GRADUATE STUDENTS Master of Science (with thesis) Date, G., “Towards a Better Understanding of Indoor Exposure to Air Pollutants: Window-opening Occurrence in U.S. Residences,” Advisor: G.C. Morrison Hill, J.T., “Cloth-air Partitioning of Oxybenzone,” Advisor: G.C. Morrison Kemp, B.M., “Material Characterization of Alaskan Asphalt Mixtures Containing Reclaimed Asphalt Pavement (RAP),” Advisor: J. Liu Sukharia, R., “Vegetation Based Assessment and Monitoring Tools for Landfill Leachate Treatment and Fugitive Plumes,” Advisor: J.G. Burken

Doctor of Philosophy Bao, Y., “Novel Applications of Pulse Pre-pump Billouin Optical Time Domain Analysis for Behavior Evaluation of Structures under Thermal and Mechanical Loading,” Advisor: G. Chen Mehdipour, I., “Characterization and Performance Evaluation of Ecological and Crack-free High-performance Concrete for Sustainable Infrastructures,” Advisor: K.H. Khayat Meng, W., “Design and Performance of Ultra-high Performance Concrete for Prefabricated Elements,” Advisor: K.H. Khayat Mullin, A.P., “Evaluation of Crack Sealing Techniques in Alaska’s Asphalt Concrete Pavements,” Advisor: J. Liu Sadati, S., “High-volume Recycled Materials for Sustainable Transportation Infrastructure,” Advisor: K.H. Khayat Valipour, M., “Design and Performance of Cost-effective Ultra High Performance Concrete for Bridge Deck Overlays,” Advisor: K.H. Khayat

Lee Voth-Gaeddert

With his advisor Dr. Daniel Oerther

Voth-Gaeddert, L., “Contributing Factors to Child Stunting in Guatemala: A Systems Analysis Focused on Enteric Disease Transmission and Mycotoxin Exposure,” Advisor: D.B. Oerther Wang, W., “Durability Behavior of Fiber Reinforced Ploymer and Steel Reinforced Polymer for Infrastructure Applications,” Advisor: J.J. Myers Wilson, J., “Phytoforensics: Applications in Vapor Intrusion Assessment,” Advisor: J.G. Burken photo by Sam O'Keefe/ Missouri S&T

Jordan Wilson

Ph.D., Environmental Engineering

2017 Scholarly Productivity Report -- 31

Civil, Architectural and Environmental Engineering

211 Butler-Carlton Hall, 1401 N. Pine St. Rolla, MO 65409-0030

Connect with us. care@mst.edu

ADVANCED CONSTRUCTION AND MATERIALS LABORATORY

ACML PROGRESS 16,000 ft2

added teaching and research space

10 4 35 30 6 new research labs

allied research centers

pieces of testing equipment

This unique laboratory will give Missouri S&T investigators a competitive edge and help build our reputation as one of the nation’s leading teaching and research universities. The cost of the expansion is $6.5 million, and we are approaching the finish line thanks to a gift of $3 million from alumnus James A. Heidman, CE’65.

University of Missouri System President Mun Choi contributed $1.7 million to help push the project closer to completion. Plans are currently being developed with Christner Inc. & McClure Engineering, with bids to be sought in August 2018. The ACML’s scheduled completion is expected in fall 2019.

For information regarding the ACML expansion, contact Dr. Joel Burken by email at burken@mst.edu or Dr. Kamal Khayat at khayatk@mst.edu.

32 -- 2017 Scholarly Productivity Report

bridges built or repaired to date through S&T’s efforts

academic departments involved